HID: Kconfig: Remove explicit transport layer dependencies
Most HID drivers (rightfully) only depend on the HID bus, not the
specific transport layer. Remove such dependencies where applicable.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 5f07d85..1b737b4 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -92,7 +92,7 @@
config HID_A4TECH
tristate "A4 tech mice" if EXPERT
- depends on USB_HID
+ depends on HID
default !EXPERT
---help---
Support for A4 tech X5 and WOP-35 / Trust 450L mice.
@@ -113,7 +113,7 @@
config HID_APPLE
tristate "Apple {i,Power,Mac}Books" if EXPERT
- depends on (USB_HID || BT_HIDP)
+ depends on HID
default !EXPERT
---help---
Support for some Apple devices which less or more break
@@ -124,27 +124,27 @@
config HID_AUREAL
tristate "Aureal"
- depends on USB_HID
+ depends on HID
---help---
Support for Aureal Cy se W-01RN Remote Controller and other Aureal derived remotes.
config HID_BELKIN
tristate "Belkin Flip KVM and Wireless keyboard" if EXPERT
- depends on USB_HID
+ depends on HID
default !EXPERT
---help---
Support for Belkin Flip KVM and Wireless keyboard.
config HID_CHERRY
tristate "Cherry Cymotion keyboard" if EXPERT
- depends on USB_HID
+ depends on HID
default !EXPERT
---help---
Support for Cherry Cymotion keyboard.
config HID_CHICONY
tristate "Chicony Tactical pad" if EXPERT
- depends on USB_HID
+ depends on HID
default !EXPERT
---help---
Support for Chicony Tactical pad.
@@ -166,7 +166,7 @@
config HID_CYPRESS
tristate "Cypress mouse and barcode readers" if EXPERT
- depends on USB_HID
+ depends on HID
default !EXPERT
---help---
Support for cypress mouse and barcode readers.
@@ -202,13 +202,13 @@
config HID_ELECOM
tristate "ELECOM BM084 bluetooth mouse"
- depends on BT_HIDP
+ depends on HID
---help---
Support for the ELECOM BM084 (bluetooth mouse).
config HID_EZKEY
tristate "Ezkey BTC 8193 keyboard" if EXPERT
- depends on USB_HID
+ depends on HID
default !EXPERT
---help---
Support for Ezkey BTC 8193 keyboard.
@@ -231,7 +231,7 @@
config HID_KEYTOUCH
tristate "Keytouch HID devices"
- depends on USB_HID
+ depends on HID
---help---
Support for Keytouch HID devices not fully compliant with
the specification. Currently supported:
@@ -249,25 +249,25 @@
config HID_UCLOGIC
tristate "UC-Logic"
- depends on USB_HID
+ depends on HID
---help---
Support for UC-Logic tablets.
config HID_WALTOP
tristate "Waltop"
- depends on USB_HID
+ depends on HID
---help---
Support for Waltop tablets.
config HID_GYRATION
tristate "Gyration remote control"
- depends on USB_HID
+ depends on HID
---help---
Support for Gyration remote control.
config HID_ICADE
tristate "ION iCade arcade controller"
- depends on BT_HIDP
+ depends on HID
---help---
Support for the ION iCade arcade controller to work as a joystick.
@@ -276,20 +276,20 @@
config HID_TWINHAN
tristate "Twinhan IR remote control"
- depends on USB_HID
+ depends on HID
---help---
Support for Twinhan IR remote control.
config HID_KENSINGTON
tristate "Kensington Slimblade Trackball" if EXPERT
- depends on USB_HID
+ depends on HID
default !EXPERT
---help---
Support for Kensington Slimblade Trackball.
config HID_LCPOWER
tristate "LC-Power"
- depends on USB_HID
+ depends on HID
---help---
Support for LC-Power RC1000MCE RF remote control.
@@ -308,7 +308,7 @@
config HID_LOGITECH
tristate "Logitech devices" if EXPERT
- depends on USB_HID
+ depends on HID
default !EXPERT
---help---
Support for Logitech devices that are not fully compliant with HID standard.
@@ -374,7 +374,7 @@
config HID_MAGICMOUSE
tristate "Apple MagicMouse multi-touch support"
- depends on BT_HIDP
+ depends on HID
---help---
Support for the Apple Magic Mouse multi-touch.
@@ -383,14 +383,14 @@
config HID_MICROSOFT
tristate "Microsoft non-fully HID-compliant devices" if EXPERT
- depends on USB_HID
+ depends on HID
default !EXPERT
---help---
Support for Microsoft devices that are not fully compliant with HID standard.
config HID_MONTEREY
tristate "Monterey Genius KB29E keyboard" if EXPERT
- depends on USB_HID
+ depends on HID
default !EXPERT
---help---
Support for Monterey Genius KB29E.
@@ -445,7 +445,7 @@
config HID_ORTEK
tristate "Ortek PKB-1700/WKB-2000/Skycable wireless keyboard and mouse trackpad"
- depends on USB_HID
+ depends on HID
---help---
There are certain devices which have LogicalMaximum wrong in the keyboard
usage page of their report descriptor. The most prevailing ones so far
@@ -473,7 +473,7 @@
config HID_PETALYNX
tristate "Petalynx Maxter remote control"
- depends on USB_HID
+ depends on HID
---help---
Support for Petalynx Maxter remote control.
@@ -545,14 +545,14 @@
config HID_PRIMAX
tristate "Primax non-fully HID-compliant devices"
- depends on USB_HID
+ depends on HID
---help---
Support for Primax devices that are not fully compliant with the
HID standard.
config HID_PS3REMOTE
tristate "Sony PS3 BD Remote Control"
- depends on BT_HIDP
+ depends on HID
---help---
Support for the Sony PS3 Blue-ray Disk Remote Control and Logitech
Harmony Adapter for PS3, which connect over Bluetooth.
@@ -569,7 +569,7 @@
config HID_SAITEK
tristate "Saitek non-fully HID-compliant devices"
- depends on USB_HID
+ depends on HID
---help---
Support for Saitek devices that are not fully compliant with the
HID standard.
@@ -578,7 +578,7 @@
config HID_SAMSUNG
tristate "Samsung InfraRed remote control or keyboards"
- depends on USB_HID
+ depends on HID
---help---
Support for Samsung InfraRed remote control or keyboards.
@@ -604,7 +604,7 @@
config HID_SUNPLUS
tristate "Sunplus wireless desktop"
- depends on USB_HID
+ depends on HID
---help---
Support for Sunplus wireless desktop.
@@ -650,20 +650,20 @@
config HID_TIVO
tristate "TiVo Slide Bluetooth remote control support"
- depends on (USB_HID || BT_HIDP)
+ depends on HID
---help---
Say Y if you have a TiVo Slide Bluetooth remote control.
config HID_TOPSEED
tristate "TopSeed Cyberlink, BTC Emprex, Conceptronic remote control support"
- depends on USB_HID
+ depends on HID
---help---
Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic
CLLRCMCE remote control.
config HID_THINGM
tristate "ThingM blink(1) USB RGB LED"
- depends on USB_HID
+ depends on HID
depends on LEDS_CLASS
---help---
Support for the ThingM blink(1) USB RGB LED. This driver registers a
@@ -689,7 +689,7 @@
config HID_WACOM
tristate "Wacom Bluetooth devices support"
- depends on BT_HIDP
+ depends on HID
depends on LEDS_CLASS
select POWER_SUPPLY
---help---
@@ -697,7 +697,7 @@
config HID_WIIMOTE
tristate "Nintendo Wii Remote support"
- depends on BT_HIDP
+ depends on HID
depends on LEDS_CLASS
select POWER_SUPPLY
select INPUT_FF_MEMLESS
@@ -729,7 +729,7 @@
config HID_ZYDACRON
tristate "Zydacron remote control support"
- depends on USB_HID
+ depends on HID
---help---
Support for Zydacron remote control.
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 320a958..9e0c4fbb 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -21,7 +21,6 @@
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <linux/usb.h>
#include "hid-ids.h"
diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
index f7f113b..ef89573 100644
--- a/drivers/hid/hid-magicmouse.c
+++ b/drivers/hid/hid-magicmouse.c
@@ -19,7 +19,6 @@
#include <linux/input/mt.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <linux/usb.h>
#include "hid-ids.h"
diff --git a/drivers/hid/hid-speedlink.c b/drivers/hid/hid-speedlink.c
index e94371a..a2f587d 100644
--- a/drivers/hid/hid-speedlink.c
+++ b/drivers/hid/hid-speedlink.c
@@ -16,10 +16,8 @@
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
-#include <linux/usb.h>
#include "hid-ids.h"
-#include "usbhid/usbhid.h"
static const struct hid_device_id speedlink_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_X_TENSIONS, USB_DEVICE_ID_SPEEDLINK_VAD_CEZANNE)},
diff --git a/drivers/hid/hid-thingm.c b/drivers/hid/hid-thingm.c
index 2055a52..99342cfa 100644
--- a/drivers/hid/hid-thingm.c
+++ b/drivers/hid/hid-thingm.c
@@ -12,7 +12,6 @@
#include <linux/hid.h>
#include <linux/leds.h>
#include <linux/module.h>
-#include <linux/usb.h>
#include "hid-ids.h"