hwmon: lis3: use block read to access data registers
Add optional blockread function to interface driver. If available
the chip driver uses it for data register access. For 12 bit device
it reads 6 bytes to get 3*16bit data. For 8 bit device it reads out
5 bytes since every second byte is dummy.
This optimizes bus usage and reduces number of operations and
interrupts needed for one data update.
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
diff --git a/drivers/hwmon/lis3lv02d_i2c.c b/drivers/hwmon/lis3lv02d_i2c.c
index c1e7420..0074809 100644
--- a/drivers/hwmon/lis3lv02d_i2c.c
+++ b/drivers/hwmon/lis3lv02d_i2c.c
@@ -66,6 +66,14 @@
return 0;
}
+static inline s32 lis3_i2c_blockread(struct lis3lv02d *lis3, int reg, int len,
+ u8 *v)
+{
+ struct i2c_client *c = lis3->bus_priv;
+ reg |= (1 << 7); /* 7th bit enables address auto incrementation */
+ return i2c_smbus_read_i2c_block_data(c, reg, len, v);
+}
+
static int lis3_i2c_init(struct lis3lv02d *lis3)
{
u8 reg;
@@ -102,6 +110,11 @@
if (pdata->driver_features & LIS3_USE_REGULATOR_CTRL)
lis3_dev.reg_ctrl = lis3_reg_ctrl;
+ if ((pdata->driver_features & LIS3_USE_BLOCK_READ) &&
+ (i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_I2C_BLOCK)))
+ lis3_dev.blkread = lis3_i2c_blockread;
+
if (pdata->axis_x)
lis3lv02d_axis_map.x = pdata->axis_x;