ASoC: SOF: partition audio-related parts from SOF core

Move all the audio-specific code in the core,
audio-specific logic in the top-level PM callbacks
and the core header files into a separate file
(sof-audio.*) in preparation for adding an
audio client device.

In the process of moving all structure definitions
for widget, routes, pcm's etc, the snd_sof_dev
member in all these structs is replaced with
the snd_soc_component member. Also, use the component
device instead of the snd_sof_dev device wherever
possible in the PCM component driver,
control IO functions and the topology parser as the
component device will be moved over to the client
device later on.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191204211556.12671-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/sound/soc/sof/pm.c b/sound/soc/sof/pm.c
index 0fd5567..d1a7b98 100644
--- a/sound/soc/sof/pm.c
+++ b/sound/soc/sof/pm.c
@@ -10,192 +10,7 @@
 
 #include "ops.h"
 #include "sof-priv.h"
-
-static int sof_restore_kcontrols(struct snd_sof_dev *sdev)
-{
-	struct snd_sof_control *scontrol;
-	int ipc_cmd, ctrl_type;
-	int ret = 0;
-
-	/* restore kcontrol values */
-	list_for_each_entry(scontrol, &sdev->kcontrol_list, list) {
-		/* reset readback offset for scontrol after resuming */
-		scontrol->readback_offset = 0;
-
-		/* notify DSP of kcontrol values */
-		switch (scontrol->cmd) {
-		case SOF_CTRL_CMD_VOLUME:
-		case SOF_CTRL_CMD_ENUM:
-		case SOF_CTRL_CMD_SWITCH:
-			ipc_cmd = SOF_IPC_COMP_SET_VALUE;
-			ctrl_type = SOF_CTRL_TYPE_VALUE_CHAN_SET;
-			ret = snd_sof_ipc_set_get_comp_data(sdev->ipc, scontrol,
-							    ipc_cmd, ctrl_type,
-							    scontrol->cmd,
-							    true);
-			break;
-		case SOF_CTRL_CMD_BINARY:
-			ipc_cmd = SOF_IPC_COMP_SET_DATA;
-			ctrl_type = SOF_CTRL_TYPE_DATA_SET;
-			ret = snd_sof_ipc_set_get_comp_data(sdev->ipc, scontrol,
-							    ipc_cmd, ctrl_type,
-							    scontrol->cmd,
-							    true);
-			break;
-
-		default:
-			break;
-		}
-
-		if (ret < 0) {
-			dev_err(sdev->dev,
-				"error: failed kcontrol value set for widget: %d\n",
-				scontrol->comp_id);
-
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
-static int sof_restore_pipelines(struct snd_sof_dev *sdev)
-{
-	struct snd_sof_widget *swidget;
-	struct snd_sof_route *sroute;
-	struct sof_ipc_pipe_new *pipeline;
-	struct snd_sof_dai *dai;
-	struct sof_ipc_comp_dai *comp_dai;
-	struct sof_ipc_cmd_hdr *hdr;
-	int ret;
-
-	/* restore pipeline components */
-	list_for_each_entry_reverse(swidget, &sdev->widget_list, list) {
-		struct sof_ipc_comp_reply r;
-
-		/* skip if there is no private data */
-		if (!swidget->private)
-			continue;
-
-		switch (swidget->id) {
-		case snd_soc_dapm_dai_in:
-		case snd_soc_dapm_dai_out:
-			dai = swidget->private;
-			comp_dai = &dai->comp_dai;
-			ret = sof_ipc_tx_message(sdev->ipc,
-						 comp_dai->comp.hdr.cmd,
-						 comp_dai, sizeof(*comp_dai),
-						 &r, sizeof(r));
-			break;
-		case snd_soc_dapm_scheduler:
-
-			/*
-			 * During suspend, all DSP cores are powered off.
-			 * Therefore upon resume, create the pipeline comp
-			 * and power up the core that the pipeline is
-			 * scheduled on.
-			 */
-			pipeline = swidget->private;
-			ret = sof_load_pipeline_ipc(sdev, pipeline, &r);
-			break;
-		default:
-			hdr = swidget->private;
-			ret = sof_ipc_tx_message(sdev->ipc, hdr->cmd,
-						 swidget->private, hdr->size,
-						 &r, sizeof(r));
-			break;
-		}
-		if (ret < 0) {
-			dev_err(sdev->dev,
-				"error: failed to load widget type %d with ID: %d\n",
-				swidget->widget->id, swidget->comp_id);
-
-			return ret;
-		}
-	}
-
-	/* restore pipeline connections */
-	list_for_each_entry_reverse(sroute, &sdev->route_list, list) {
-		struct sof_ipc_pipe_comp_connect *connect;
-		struct sof_ipc_reply reply;
-
-		/* skip if there's no private data */
-		if (!sroute->private)
-			continue;
-
-		connect = sroute->private;
-
-		/* send ipc */
-		ret = sof_ipc_tx_message(sdev->ipc,
-					 connect->hdr.cmd,
-					 connect, sizeof(*connect),
-					 &reply, sizeof(reply));
-		if (ret < 0) {
-			dev_err(sdev->dev,
-				"error: failed to load route sink %s control %s source %s\n",
-				sroute->route->sink,
-				sroute->route->control ? sroute->route->control
-					: "none",
-				sroute->route->source);
-
-			return ret;
-		}
-	}
-
-	/* restore dai links */
-	list_for_each_entry_reverse(dai, &sdev->dai_list, list) {
-		struct sof_ipc_reply reply;
-		struct sof_ipc_dai_config *config = dai->dai_config;
-
-		if (!config) {
-			dev_err(sdev->dev, "error: no config for DAI %s\n",
-				dai->name);
-			continue;
-		}
-
-		/*
-		 * The link DMA channel would be invalidated for running
-		 * streams but not for streams that were in the PAUSED
-		 * state during suspend. So invalidate it here before setting
-		 * the dai config in the DSP.
-		 */
-		if (config->type == SOF_DAI_INTEL_HDA)
-			config->hda.link_dma_ch = DMA_CHAN_INVALID;
-
-		ret = sof_ipc_tx_message(sdev->ipc,
-					 config->hdr.cmd, config,
-					 config->hdr.size,
-					 &reply, sizeof(reply));
-
-		if (ret < 0) {
-			dev_err(sdev->dev,
-				"error: failed to set dai config for %s\n",
-				dai->name);
-
-			return ret;
-		}
-	}
-
-	/* complete pipeline */
-	list_for_each_entry(swidget, &sdev->widget_list, list) {
-		switch (swidget->id) {
-		case snd_soc_dapm_scheduler:
-			swidget->complete =
-				snd_sof_complete_pipeline(sdev, swidget);
-			break;
-		default:
-			break;
-		}
-	}
-
-	/* restore pipeline kcontrols */
-	ret = sof_restore_kcontrols(sdev);
-	if (ret < 0)
-		dev_err(sdev->dev,
-			"error: restoring kcontrols after resume\n");
-
-	return ret;
-}
+#include "sof-audio.h"
 
 static int sof_send_pm_ctx_ipc(struct snd_sof_dev *sdev, int cmd)
 {
@@ -213,34 +28,6 @@ static int sof_send_pm_ctx_ipc(struct snd_sof_dev *sdev, int cmd)
 				 sizeof(pm_ctx), &reply, sizeof(reply));
 }
 
-static int sof_set_hw_params_upon_resume(struct snd_sof_dev *sdev)
-{
-	struct snd_pcm_substream *substream;
-	struct snd_sof_pcm *spcm;
-	snd_pcm_state_t state;
-	int dir;
-
-	/*
-	 * SOF requires hw_params to be set-up internally upon resume.
-	 * So, set the flag to indicate this for those streams that
-	 * have been suspended.
-	 */
-	list_for_each_entry(spcm, &sdev->pcm_list, list) {
-		for (dir = 0; dir <= SNDRV_PCM_STREAM_CAPTURE; dir++) {
-			substream = spcm->stream[dir].substream;
-			if (!substream || !substream->runtime)
-				continue;
-
-			state = substream->runtime->status->state;
-			if (state == SNDRV_PCM_STATE_SUSPENDED)
-				spcm->prepared[dir] = false;
-		}
-	}
-
-	/* set internal flag for BE */
-	return snd_sof_dsp_hw_params_upon_resume(sdev);
-}
-
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE)
 static void sof_cache_debugfs(struct snd_sof_dev *sdev)
 {
@@ -311,7 +98,7 @@ static int sof_resume(struct device *dev, bool runtime_resume)
 	}
 
 	/* restore pipelines */
-	ret = sof_restore_pipelines(sdev);
+	ret = sof_restore_pipelines(sdev->dev);
 	if (ret < 0) {
 		dev_err(sdev->dev,
 			"error: failed to restore pipeline after resume %d\n",
@@ -346,7 +133,7 @@ static int sof_suspend(struct device *dev, bool runtime_suspend)
 
 	/* set restore_stream for all streams during system suspend */
 	if (!runtime_suspend) {
-		ret = sof_set_hw_params_upon_resume(sdev);
+		ret = sof_set_hw_params_upon_resume(sdev->dev);
 		if (ret < 0) {
 			dev_err(sdev->dev,
 				"error: setting hw_params flag during suspend %d\n",