driver/net/*: remove redundant argument comments
remove redundant argument comments in files of drivers/net/*
Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 91795f7..122539a 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -345,7 +345,6 @@
/**
* e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
* @adapter: address of board private structure
- * @rx_ring: pointer to receive ring structure
* @cleaned_count: number of buffers to allocate this pass
**/
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 1cbae85..20d27e6 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -1980,7 +1980,6 @@
/**
* igb_free_tx_resources - Free Tx Resources per Queue
- * @adapter: board private structure
* @tx_ring: Tx descriptor ring for a specific queue
*
* Free all transmit software resources
@@ -2033,7 +2032,6 @@
/**
* igb_clean_tx_ring - Free Tx Buffers
- * @adapter: board private structure
* @tx_ring: ring to be cleaned
**/
static void igb_clean_tx_ring(struct igb_ring *tx_ring)
@@ -2080,7 +2078,6 @@
/**
* igb_free_rx_resources - Free Rx Resources
- * @adapter: board private structure
* @rx_ring: ring to clean the resources from
*
* Free all receive software resources
@@ -2120,7 +2117,6 @@
/**
* igb_clean_rx_ring - Free Rx Buffers per Queue
- * @adapter: board private structure
* @rx_ring: ring to free buffers from
**/
static void igb_clean_rx_ring(struct igb_ring *rx_ring)
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 36f2bb6..b2a7ea8 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -1320,7 +1320,6 @@
* ixgbe_intr - legacy mode Interrupt Handler
* @irq: interrupt number
* @data: pointer to a network interface device structure
- * @pt_regs: CPU registers structure
**/
static irqreturn_t ixgbe_intr(int irq, void *data)
{
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 713091e..0418045 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -1175,7 +1175,6 @@
* ax_interrupt - handle the interrupts from an 8390
* @irq: interrupt number
* @dev_id: a pointer to the net_device
- * @regs: unused
*
* Handle the ether interface interrupts. We pull packets from
* the 8390 via the card specific functions and fire them at the networking
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index fa3a460..8e8337e 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -1630,7 +1630,6 @@
* sis900_interrupt - sis900 interrupt handler
* @irq: the irq number
* @dev_instance: the client data object
- * @regs: snapshot of processor context
*
* The interrupt handler does all of the Rx thread work,
* and cleans up after the Tx thread
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index b6435d0..07599b4 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -672,7 +672,6 @@
/**
* spider_net_prepare_tx_descr - fill tx descriptor with skb data
* @card: card structure
- * @descr: descriptor structure to fill out
* @skb: packet to use
*
* returns 0 on success, <0 on failure.
@@ -867,7 +866,6 @@
/**
* spider_net_kick_tx_dma - enables TX DMA processing
* @card: card structure
- * @descr: descriptor address to enable TX processing at
*
* This routine will start the transmit DMA running if
* it is not already running. This routine ned only be
@@ -1637,7 +1635,6 @@
* spider_net_interrupt - interrupt handler for spider_net
* @irq: interrupt number
* @ptr: pointer to net_device
- * @regs: PU registers
*
* returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no
* interrupt found raised by card.
@@ -2419,7 +2416,6 @@
/**
* spider_net_setup_pci_dev - sets up the device in terms of PCI operations
- * @card: card structure
* @pdev: PCI device
*
* Returns the card structure or NULL if any errors occur