hwmon: Driver for Texas Instruments INA238
The INA238 is a I2C power monitor similar to other INA2xx devices,
providing shunt voltage, bus voltage, current, power and temperature
measurements.
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Link: https://lore.kernel.org/r/20211102052754.817220-3-nathan@nathanrossi.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
diff --git a/Documentation/hwmon/ina238.rst b/Documentation/hwmon/ina238.rst
new file mode 100644
index 0000000..d9f4799
--- /dev/null
+++ b/Documentation/hwmon/ina238.rst
@@ -0,0 +1,56 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver ina238
+====================
+
+Supported chips:
+
+ * Texas Instruments INA238
+
+ Prefix: 'ina238'
+
+ Addresses: I2C 0x40 - 0x4f
+
+ Datasheet:
+ https://www.ti.com/lit/gpn/ina238
+
+Author: Nathan Rossi <nathan.rossi@digi.com>
+
+Description
+-----------
+
+The INA238 is a current shunt, power and temperature monitor with an I2C
+interface. It includes a number of programmable functions including alerts,
+conversion rate, sample averaging and selectable shunt voltage accuracy.
+
+The shunt value in micro-ohms can be set via platform data or device tree at
+compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
+refer to the Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml for bindings
+if the device tree is used.
+
+Sysfs entries
+-------------
+
+======================= =======================================================
+in0_input Shunt voltage (mV)
+in0_min Minimum shunt voltage threshold (mV)
+in0_min_alarm Minimum shunt voltage alarm
+in0_max Maximum shunt voltage threshold (mV)
+in0_max_alarm Maximum shunt voltage alarm
+
+in1_input Bus voltage (mV)
+in1_min Minimum bus voltage threshold (mV)
+in1_min_alarm Minimum shunt voltage alarm
+in1_max Maximum bus voltage threshold (mV)
+in1_max_alarm Maximum shunt voltage alarm
+
+power1_input Power measurement (uW)
+power1_max Maximum power threshold (uW)
+power1_max_alarm Maximum power alarm
+
+curr1_input Current measurement (mA)
+
+temp1_input Die temperature measurement (mC)
+temp1_max Maximum die temperature threshold (mC)
+temp1_max_alarm Maximum die temperature alarm
+======================= =======================================================
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 7046bf1..6f30c8c 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -76,6 +76,7 @@
ibmpowernv
ina209
ina2xx
+ ina238
ina3221
intel-m10-bmc-hwmon
ir35221