serial: sh-sci: Add pin initialization for SCIFA/SCIFB
Before, the driver relied on initialization by the boot loader, or by
implicit reset state.
Note that unlike on (H)SCIF, the RTS/CTS bits exist only if dedicated
RTS/CTS pins are available, which depends on the SoC and UART instance.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index c46999f..b9d027a 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -712,7 +712,21 @@
return;
}
- if (sci_getreg(port, SCSPTR)->size) {
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ u16 ctrl = serial_port_in(port, SCPCR);
+
+ /* Enable RXD and TXD pin functions */
+ ctrl &= ~(SCPCR_RXDC | SCPCR_TXDC);
+ if (to_sci_port(port)->cfg->capabilities & SCIx_HAVE_RTSCTS) {
+ /* RTS# is output, driven 1 */
+ ctrl |= SCPCR_RTSC;
+ serial_port_out(port, SCPDR,
+ serial_port_in(port, SCPDR) | SCPDR_RTSD);
+ /* Enable CTS# pin function */
+ ctrl &= ~SCPCR_CTSC;
+ }
+ serial_port_out(port, SCPCR, ctrl);
+ } else if (sci_getreg(port, SCSPTR)->size) {
u16 status = serial_port_in(port, SCSPTR);
/* RTS# is output, driven 1 */