sched: track the next-highest priority on each runqueue
We will use this later in the series to reduce the amount of rq-lock
contention during a pull operation
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 0a52772..ad36d72 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -108,7 +108,7 @@
if (rt_rq->rt_nr_running) {
if (rt_se && !on_rt_rq(rt_se))
enqueue_rt_entity(rt_se);
- if (rt_rq->highest_prio < curr->prio)
+ if (rt_rq->highest_prio.curr < curr->prio)
resched_task(curr);
}
}
@@ -473,7 +473,7 @@
struct rt_rq *rt_rq = group_rt_rq(rt_se);
if (rt_rq)
- return rt_rq->highest_prio;
+ return rt_rq->highest_prio.curr;
#endif
return rt_task_of(rt_se)->prio;
@@ -547,6 +547,21 @@
}
}
+#if defined CONFIG_SMP || defined CONFIG_RT_GROUP_SCHED
+
+static struct task_struct *pick_next_highest_task_rt(struct rq *rq, int cpu);
+
+static inline int next_prio(struct rq *rq)
+{
+ struct task_struct *next = pick_next_highest_task_rt(rq, rq->cpu);
+
+ if (next && rt_prio(next->prio))
+ return next->prio;
+ else
+ return MAX_RT_PRIO;
+}
+#endif
+
static inline
void inc_rt_tasks(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
{
@@ -558,14 +573,32 @@
WARN_ON(!rt_prio(prio));
rt_rq->rt_nr_running++;
#if defined CONFIG_SMP || defined CONFIG_RT_GROUP_SCHED
- if (prio < rt_rq->highest_prio) {
+ if (prio < rt_rq->highest_prio.curr) {
- rt_rq->highest_prio = prio;
+ /*
+ * If the new task is higher in priority than anything on the
+ * run-queue, we have a new high that must be published to
+ * the world. We also know that the previous high becomes
+ * our next-highest.
+ */
+ rt_rq->highest_prio.next = rt_rq->highest_prio.curr;
+ rt_rq->highest_prio.curr = prio;
#ifdef CONFIG_SMP
if (rq->online)
cpupri_set(&rq->rd->cpupri, rq->cpu, prio);
#endif
- }
+ } else if (prio == rt_rq->highest_prio.curr)
+ /*
+ * If the next task is equal in priority to the highest on
+ * the run-queue, then we implicitly know that the next highest
+ * task cannot be any lower than current
+ */
+ rt_rq->highest_prio.next = prio;
+ else if (prio < rt_rq->highest_prio.next)
+ /*
+ * Otherwise, we need to recompute next-highest
+ */
+ rt_rq->highest_prio.next = next_prio(rq);
#endif
#ifdef CONFIG_SMP
if (rt_se->nr_cpus_allowed > 1)
@@ -589,7 +622,7 @@
{
#ifdef CONFIG_SMP
struct rq *rq = rq_of_rt_rq(rt_rq);
- int highest_prio = rt_rq->highest_prio;
+ int highest_prio = rt_rq->highest_prio.curr;
#endif
WARN_ON(!rt_prio(rt_se_prio(rt_se)));
@@ -597,24 +630,32 @@
rt_rq->rt_nr_running--;
#if defined CONFIG_SMP || defined CONFIG_RT_GROUP_SCHED
if (rt_rq->rt_nr_running) {
- struct rt_prio_array *array;
+ int prio = rt_se_prio(rt_se);
- WARN_ON(rt_se_prio(rt_se) < rt_rq->highest_prio);
- if (rt_se_prio(rt_se) == rt_rq->highest_prio) {
- /* recalculate */
- array = &rt_rq->active;
- rt_rq->highest_prio =
+ WARN_ON(prio < rt_rq->highest_prio.curr);
+
+ /*
+ * This may have been our highest or next-highest priority
+ * task and therefore we may have some recomputation to do
+ */
+ if (prio == rt_rq->highest_prio.curr) {
+ struct rt_prio_array *array = &rt_rq->active;
+
+ rt_rq->highest_prio.curr =
sched_find_first_bit(array->bitmap);
- } /* otherwise leave rq->highest prio alone */
+ }
+
+ if (prio <= rt_rq->highest_prio.next)
+ rt_rq->highest_prio.next = next_prio(rq);
} else
- rt_rq->highest_prio = MAX_RT_PRIO;
+ rt_rq->highest_prio.curr = MAX_RT_PRIO;
#endif
#ifdef CONFIG_SMP
if (rt_se->nr_cpus_allowed > 1)
rq->rt.rt_nr_migratory--;
- if (rq->online && rt_rq->highest_prio != highest_prio)
- cpupri_set(&rq->rd->cpupri, rq->cpu, rt_rq->highest_prio);
+ if (rq->online && rt_rq->highest_prio.curr != highest_prio)
+ cpupri_set(&rq->rd->cpupri, rq->cpu, rt_rq->highest_prio.curr);
update_rt_migration(rq);
#endif /* CONFIG_SMP */
@@ -1064,7 +1105,7 @@
}
/* If this rq is still suitable use it. */
- if (lowest_rq->rt.highest_prio > task->prio)
+ if (lowest_rq->rt.highest_prio.curr > task->prio)
break;
/* try again */
@@ -1252,7 +1293,7 @@
static void pre_schedule_rt(struct rq *rq, struct task_struct *prev)
{
/* Try to pull RT tasks here if we lower this rq's prio */
- if (unlikely(rt_task(prev)) && rq->rt.highest_prio > prev->prio)
+ if (unlikely(rt_task(prev)) && rq->rt.highest_prio.curr > prev->prio)
pull_rt_task(rq);
}
@@ -1338,7 +1379,7 @@
__enable_runtime(rq);
- cpupri_set(&rq->rd->cpupri, rq->cpu, rq->rt.highest_prio);
+ cpupri_set(&rq->rd->cpupri, rq->cpu, rq->rt.highest_prio.curr);
}
/* Assumes rq->lock is held */
@@ -1429,7 +1470,7 @@
* can release the rq lock and p could migrate.
* Only reschedule if p is still on the same runqueue.
*/
- if (p->prio > rq->rt.highest_prio && rq->curr == p)
+ if (p->prio > rq->rt.highest_prio.curr && rq->curr == p)
resched_task(p);
#else
/* For UP simply resched on drop of prio */