ethernet/arc/arc_emac - Add new driver
Driver for non-standard on-chip ethernet device ARC EMAC 10/100,
instantiated in some legacy ARC (Synopsys) FPGA Boards such as
ARCAngel4/ML50x.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Cc: Joe Perches <joe@perches.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Mischa Jonker <mjonker@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-kernel@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Florian Fainelli <florian@openwrt.org>
Cc: David Laight <david.laight@aculab.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c
new file mode 100644
index 0000000..20345f6
--- /dev/null
+++ b/drivers/net/ethernet/arc/emac_main.c
@@ -0,0 +1,806 @@
+/*
+ * Copyright (C) 2004-2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for the ARC EMAC 10100 (hardware revision 5)
+ *
+ * Contributors:
+ * Amit Bhor
+ * Sameer Dhavale
+ * Vineet Gupta
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+
+#include "emac.h"
+
+#define DRV_NAME "arc_emac"
+#define DRV_VERSION "1.0"
+
+/**
+ * arc_emac_adjust_link - Adjust the PHY link duplex.
+ * @ndev: Pointer to the net_device structure.
+ *
+ * This function is called to change the duplex setting after auto negotiation
+ * is done by the PHY.
+ */
+static void arc_emac_adjust_link(struct net_device *ndev)
+{
+ struct arc_emac_priv *priv = netdev_priv(ndev);
+ struct phy_device *phy_dev = priv->phy_dev;
+ unsigned int reg, state_changed = 0;
+
+ if (priv->link != phy_dev->link) {
+ priv->link = phy_dev->link;
+ state_changed = 1;
+ }
+
+ if (priv->speed != phy_dev->speed) {
+ priv->speed = phy_dev->speed;
+ state_changed = 1;
+ }
+
+ if (priv->duplex != phy_dev->duplex) {
+ reg = arc_reg_get(priv, R_CTRL);
+
+ if (DUPLEX_FULL == phy_dev->duplex)
+ reg |= ENFL_MASK;
+ else
+ reg &= ~ENFL_MASK;
+
+ arc_reg_set(priv, R_CTRL, reg);
+ priv->duplex = phy_dev->duplex;
+ state_changed = 1;
+ }
+
+ if (state_changed)
+ phy_print_status(phy_dev);
+}
+
+/**
+ * arc_emac_get_settings - Get PHY settings.
+ * @ndev: Pointer to net_device structure.
+ * @cmd: Pointer to ethtool_cmd structure.
+ *
+ * This implements ethtool command for getting PHY settings. If PHY could
+ * not be found, the function returns -ENODEV. This function calls the
+ * relevant PHY ethtool API to get the PHY settings.
+ * Issue "ethtool ethX" under linux prompt to execute this function.
+ */
+static int arc_emac_get_settings(struct net_device *ndev,
+ struct ethtool_cmd *cmd)
+{
+ struct arc_emac_priv *priv = netdev_priv(ndev);
+
+ return phy_ethtool_gset(priv->phy_dev, cmd);
+}
+
+/**
+ * arc_emac_set_settings - Set PHY settings as passed in the argument.
+ * @ndev: Pointer to net_device structure.
+ * @cmd: Pointer to ethtool_cmd structure.
+ *
+ * This implements ethtool command for setting various PHY settings. If PHY
+ * could not be found, the function returns -ENODEV. This function calls the
+ * relevant PHY ethtool API to set the PHY.
+ * Issue e.g. "ethtool -s ethX speed 1000" under linux prompt to execute this
+ * function.
+ */
+static int arc_emac_set_settings(struct net_device *ndev,
+ struct ethtool_cmd *cmd)
+{
+ struct arc_emac_priv *priv = netdev_priv(ndev);
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ return phy_ethtool_sset(priv->phy_dev, cmd);
+}
+
+/**
+ * arc_emac_get_drvinfo - Get EMAC driver information.
+ * @ndev: Pointer to net_device structure.
+ * @info: Pointer to ethtool_drvinfo structure.
+ *
+ * This implements ethtool command for getting the driver information.
+ * Issue "ethtool -i ethX" under linux prompt to execute this function.
+ */
+static void arc_emac_get_drvinfo(struct net_device *ndev,
+ struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
+ strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+}
+
+static const struct ethtool_ops arc_emac_ethtool_ops = {
+ .get_settings = arc_emac_get_settings,
+ .set_settings = arc_emac_set_settings,
+ .get_drvinfo = arc_emac_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+};
+
+#define FIRST_OR_LAST_MASK (FIRST_MASK | LAST_MASK)
+
+/**
+ * arc_emac_tx_clean - clears processed by EMAC Tx BDs.
+ * @ndev: Pointer to the network device.
+ */
+static void arc_emac_tx_clean(struct net_device *ndev)
+{
+ struct arc_emac_priv *priv = netdev_priv(ndev);
+ struct net_device_stats *stats = &priv->stats;
+ unsigned int i;
+
+ for (i = 0; i < TX_BD_NUM; i++) {
+ unsigned int *txbd_dirty = &priv->txbd_dirty;
+ struct arc_emac_bd *txbd = &priv->txbd[*txbd_dirty];
+ struct buffer_state *tx_buff = &priv->tx_buff[*txbd_dirty];
+ struct sk_buff *skb = tx_buff->skb;
+ unsigned int info = le32_to_cpu(txbd->info);
+
+ *txbd_dirty = (*txbd_dirty + 1) % TX_BD_NUM;
+
+ if ((info & FOR_EMAC) || !txbd->data)
+ break;
+
+ if (unlikely(info & (DROP | DEFR | LTCL | UFLO))) {
+ stats->tx_errors++;
+ stats->tx_dropped++;
+
+ if (info & DEFR)
+ stats->tx_carrier_errors++;
+
+ if (info & LTCL)
+ stats->collisions++;
+
+ if (info & UFLO)
+ stats->tx_fifo_errors++;
+ } else if (likely(info & FIRST_OR_LAST_MASK)) {
+ stats->tx_packets++;
+ stats->tx_bytes += skb->len;
+ }
+
+ dma_unmap_single(&ndev->dev, dma_unmap_addr(&tx_buff, addr),
+ dma_unmap_len(&tx_buff, len), DMA_TO_DEVICE);
+
+ /* return the sk_buff to system */
+ dev_kfree_skb_irq(skb);
+
+ txbd->data = 0;
+ txbd->info = 0;
+
+ if (netif_queue_stopped(ndev))
+ netif_wake_queue(ndev);
+ }
+}
+
+/**
+ * arc_emac_rx - processing of Rx packets.
+ * @ndev: Pointer to the network device.
+ * @budget: How many BDs to process on 1 call.
+ *
+ * returns: Number of processed BDs
+ *
+ * Iterate through Rx BDs and deliver received packages to upper layer.
+ */
+static int arc_emac_rx(struct net_device *ndev, int budget)
+{
+ struct arc_emac_priv *priv = netdev_priv(ndev);
+ unsigned int work_done;
+
+ for (work_done = 0; work_done <= budget; work_done++) {
+ unsigned int *last_rx_bd = &priv->last_rx_bd;
+ struct net_device_stats *stats = &priv->stats;
+ struct buffer_state *rx_buff = &priv->rx_buff[*last_rx_bd];
+ struct arc_emac_bd *rxbd = &priv->rxbd[*last_rx_bd];
+ unsigned int buflen = EMAC_BUFFER_SIZE;
+ unsigned int pktlen, info = le32_to_cpu(rxbd->info);
+ struct sk_buff *skb;
+ dma_addr_t addr;
+
+ if (unlikely((info & OWN_MASK) == FOR_EMAC))
+ break;
+
+ /* Make a note that we saw a packet at this BD.
+ * So next time, driver starts from this + 1
+ */
+ *last_rx_bd = (*last_rx_bd + 1) % RX_BD_NUM;
+
+ if (unlikely((info & FIRST_OR_LAST_MASK) !=
+ FIRST_OR_LAST_MASK)) {
+ /* We pre-allocate buffers of MTU size so incoming
+ * packets won't be split/chained.
+ */
+ if (net_ratelimit())
+ netdev_err(ndev, "incomplete packet received\n");
+
+ /* Return ownership to EMAC */
+ rxbd->info = cpu_to_le32(FOR_EMAC | buflen);
+ stats->rx_errors++;
+ stats->rx_length_errors++;
+ continue;
+ }
+
+ pktlen = info & LEN_MASK;
+ stats->rx_packets++;
+ stats->rx_bytes += pktlen;
+ skb = rx_buff->skb;
+ skb_put(skb, pktlen);
+ skb->dev = ndev;
+ skb->protocol = eth_type_trans(skb, ndev);
+
+ dma_unmap_single(&ndev->dev, dma_unmap_addr(&rx_buff, addr),
+ dma_unmap_len(&rx_buff, len), DMA_FROM_DEVICE);
+
+ /* Prepare the BD for next cycle */
+ rx_buff->skb = netdev_alloc_skb_ip_align(ndev, buflen);
+ if (unlikely(!rx_buff->skb)) {
+ stats->rx_errors++;
+ /* Because receive_skb is below, increment rx_dropped */
+ stats->rx_dropped++;
+ continue;
+ }
+
+ /* receive_skb only if new skb was allocated to avoid holes */
+ netif_receive_skb(skb);
+
+ addr = dma_map_single(&ndev->dev, (void *)rx_buff->skb->data,
+ buflen, DMA_FROM_DEVICE);
+ if (dma_mapping_error(&ndev->dev, addr)) {
+ if (net_ratelimit())
+ netdev_err(ndev, "cannot dma map\n");
+ dev_kfree_skb(rx_buff->skb);
+ stats->rx_errors++;
+ continue;
+ }
+ dma_unmap_addr_set(&rx_buff, mapping, addr);
+ dma_unmap_len_set(&rx_buff, len, buflen);
+
+ rxbd->data = cpu_to_le32(rx_buff->skb->data);
+
+ /* Make sure pointer to data buffer is set */
+ wmb();
+
+ /* Return ownership to EMAC */
+ rxbd->info = cpu_to_le32(FOR_EMAC | buflen);
+ }
+
+ return work_done;
+}
+
+/**
+ * arc_emac_poll - NAPI poll handler.
+ * @napi: Pointer to napi_struct structure.
+ * @budget: How many BDs to process on 1 call.
+ *
+ * returns: Number of processed BDs
+ */
+static int arc_emac_poll(struct napi_struct *napi, int budget)
+{
+ struct net_device *ndev = napi->dev;
+ struct arc_emac_priv *priv = netdev_priv(ndev);
+ unsigned int work_done;
+
+ arc_emac_tx_clean(ndev);
+
+ work_done = arc_emac_rx(ndev, budget);
+ if (work_done < budget) {
+ napi_complete(napi);
+ arc_reg_or(priv, R_ENABLE, RXINT_MASK);
+ }
+
+ return work_done;
+}
+
+/**
+ * arc_emac_intr - Global interrupt handler for EMAC.
+ * @irq: irq number.
+ * @dev_instance: device instance.
+ *
+ * returns: IRQ_HANDLED for all cases.
+ *
+ * ARC EMAC has only 1 interrupt line, and depending on bits raised in
+ * STATUS register we may tell what is a reason for interrupt to fire.
+ */
+static irqreturn_t arc_emac_intr(int irq, void *dev_instance)
+{
+ struct net_device *ndev = dev_instance;
+ struct arc_emac_priv *priv = netdev_priv(ndev);
+ struct net_device_stats *stats = &priv->stats;
+ unsigned int status;
+
+ status = arc_reg_get(priv, R_STATUS);
+ status &= ~MDIO_MASK;
+
+ /* Reset all flags except "MDIO complete" */
+ arc_reg_set(priv, R_STATUS, status);
+
+ if (status & RXINT_MASK) {
+ if (likely(napi_schedule_prep(&priv->napi))) {
+ arc_reg_clr(priv, R_ENABLE, RXINT_MASK);
+ __napi_schedule(&priv->napi);
+ }
+ }
+
+ if (status & ERR_MASK) {
+ /* MSER/RXCR/RXFR/RXFL interrupt fires on corresponding
+ * 8-bit error counter overrun.
+ */
+
+ if (status & MSER_MASK) {
+ stats->rx_missed_errors += 0x100;
+ stats->rx_errors += 0x100;
+ }
+
+ if (status & RXCR_MASK) {
+ stats->rx_crc_errors += 0x100;
+ stats->rx_errors += 0x100;
+ }
+
+ if (status & RXFR_MASK) {
+ stats->rx_frame_errors += 0x100;
+ stats->rx_errors += 0x100;
+ }
+
+ if (status & RXFL_MASK) {
+ stats->rx_over_errors += 0x100;
+ stats->rx_errors += 0x100;
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * arc_emac_open - Open the network device.
+ * @ndev: Pointer to the network device.
+ *
+ * returns: 0, on success or non-zero error value on failure.
+ *
+ * This function sets the MAC address, requests and enables an IRQ
+ * for the EMAC device and starts the Tx queue.
+ * It also connects to the phy device.
+ */
+static int arc_emac_open(struct net_device *ndev)
+{
+ struct arc_emac_priv *priv = netdev_priv(ndev);
+ struct phy_device *phy_dev = priv->phy_dev;
+ struct arc_emac_bd *bd;
+ struct sk_buff *skb;
+ int i;
+
+ phy_dev->autoneg = AUTONEG_ENABLE;
+ phy_dev->speed = 0;
+ phy_dev->duplex = 0;
+ phy_dev->advertising = phy_dev->supported;
+
+ if (priv->max_speed > 100) {
+ phy_dev->advertising &= PHY_GBIT_FEATURES;
+ } else if (priv->max_speed <= 100) {
+ phy_dev->advertising &= PHY_BASIC_FEATURES;
+ if (priv->max_speed <= 10) {
+ phy_dev->advertising &= ~SUPPORTED_100baseT_Half;
+ phy_dev->advertising &= ~SUPPORTED_100baseT_Full;
+ }
+ }
+
+ /* Allocate and set buffers for Rx BD's */
+ bd = priv->rxbd;
+ for (i = 0; i < RX_BD_NUM; i++) {
+ skb = netdev_alloc_skb_ip_align(ndev, EMAC_BUFFER_SIZE);
+ if (unlikely(!skb))
+ return -ENOMEM;
+
+ priv->rx_buff[i].skb = skb;
+ bd->data = cpu_to_le32(skb->data);
+
+ /* Make sure pointer to data buffer is set */
+ wmb();
+
+ /* Set ownership to EMAC */
+ bd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE);
+ bd++;
+ }
+
+ priv->last_rx_bd = 0;
+
+ /* Clean Tx BD's */
+ memset(priv->txbd, 0, TX_RING_SZ);
+
+ /* Initialize logical address filter */
+ arc_reg_set(priv, R_LAFL, 0);
+ arc_reg_set(priv, R_LAFH, 0);
+
+ /* Set BD ring pointers for device side */
+ arc_reg_set(priv, R_RX_RING, (unsigned int)priv->rxbd_dma);
+ arc_reg_set(priv, R_TX_RING, (unsigned int)priv->txbd_dma);
+
+ /* Enable interrupts */
+ arc_reg_set(priv, R_ENABLE, RXINT_MASK | ERR_MASK);
+
+ /* Set CONTROL */
+ arc_reg_set(priv, R_CTRL,
+ (RX_BD_NUM << 24) | /* RX BD table length */
+ (TX_BD_NUM << 16) | /* TX BD table length */
+ TXRN_MASK | RXRN_MASK);
+
+ napi_enable(&priv->napi);
+
+ /* Enable EMAC */
+ arc_reg_or(priv, R_CTRL, EN_MASK);
+
+ phy_start_aneg(priv->phy_dev);
+
+ netif_start_queue(ndev);
+
+ return 0;
+}
+
+/**
+ * arc_emac_stop - Close the network device.
+ * @ndev: Pointer to the network device.
+ *
+ * This function stops the Tx queue, disables interrupts and frees the IRQ for
+ * the EMAC device.
+ * It also disconnects the PHY device associated with the EMAC device.
+ */
+static int arc_emac_stop(struct net_device *ndev)
+{
+ struct arc_emac_priv *priv = netdev_priv(ndev);
+
+ napi_disable(&priv->napi);
+ netif_stop_queue(ndev);
+
+ /* Disable interrupts */
+ arc_reg_clr(priv, R_ENABLE, RXINT_MASK | ERR_MASK);
+
+ /* Disable EMAC */
+ arc_reg_clr(priv, R_CTRL, EN_MASK);
+
+ return 0;
+}
+
+/**
+ * arc_emac_stats - Get system network statistics.
+ * @ndev: Pointer to net_device structure.
+ *
+ * Returns the address of the device statistics structure.
+ * Statistics are updated in interrupt handler.
+ */
+static struct net_device_stats *arc_emac_stats(struct net_device *ndev)
+{
+ struct arc_emac_priv *priv = netdev_priv(ndev);
+ struct net_device_stats *stats = &priv->stats;
+ unsigned long miss, rxerr;
+ u8 rxcrc, rxfram, rxoflow;
+
+ rxerr = arc_reg_get(priv, R_RXERR);
+ miss = arc_reg_get(priv, R_MISS);
+
+ rxcrc = rxerr;
+ rxfram = rxerr >> 8;
+ rxoflow = rxerr >> 16;
+
+ stats->rx_errors += miss;
+ stats->rx_errors += rxcrc + rxfram + rxoflow;
+
+ stats->rx_over_errors += rxoflow;
+ stats->rx_frame_errors += rxfram;
+ stats->rx_crc_errors += rxcrc;
+ stats->rx_missed_errors += miss;
+
+ return stats;
+}
+
+/**
+ * arc_emac_tx - Starts the data transmission.
+ * @skb: sk_buff pointer that contains data to be Transmitted.
+ * @ndev: Pointer to net_device structure.
+ *
+ * returns: NETDEV_TX_OK, on success
+ * NETDEV_TX_BUSY, if any of the descriptors are not free.
+ *
+ * This function is invoked from upper layers to initiate transmission.
+ */
+static int arc_emac_tx(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct arc_emac_priv *priv = netdev_priv(ndev);
+ unsigned int len, *txbd_curr = &priv->txbd_curr;
+ struct net_device_stats *stats = &priv->stats;
+ __le32 *info = &priv->txbd[*txbd_curr].info;
+ dma_addr_t addr;
+
+ if (skb_padto(skb, ETH_ZLEN))
+ return NETDEV_TX_OK;
+
+ len = max_t(unsigned int, ETH_ZLEN, skb->len);
+
+ /* EMAC still holds this buffer in its possession.
+ * CPU must not modify this buffer descriptor
+ */
+ if (unlikely((le32_to_cpu(*info) & OWN_MASK) == FOR_EMAC)) {
+ netif_stop_queue(ndev);
+ return NETDEV_TX_BUSY;
+ }
+
+ addr = dma_map_single(&ndev->dev, (void *)skb->data, len,
+ DMA_TO_DEVICE);
+
+ if (unlikely(dma_mapping_error(&ndev->dev, addr))) {
+ stats->tx_dropped++;
+ stats->tx_errors++;
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+ dma_unmap_addr_set(&priv->tx_buff[*txbd_curr], mapping, addr);
+ dma_unmap_len_set(&priv->tx_buff[*txbd_curr], len, len);
+
+ priv->tx_buff[*txbd_curr].skb = skb;
+ priv->txbd[*txbd_curr].data = cpu_to_le32(skb->data);
+
+ /* Make sure pointer to data buffer is set */
+ wmb();
+
+ *info = cpu_to_le32(FOR_EMAC | FIRST_OR_LAST_MASK | len);
+
+ /* Increment index to point to the next BD */
+ *txbd_curr = (*txbd_curr + 1) % TX_BD_NUM;
+
+ /* Get "info" of the next BD */
+ info = &priv->txbd[*txbd_curr].info;
+
+ /* Check if if Tx BD ring is full - next BD is still owned by EMAC */
+ if (unlikely((le32_to_cpu(*info) & OWN_MASK) == FOR_EMAC))
+ netif_stop_queue(ndev);
+
+ arc_reg_set(priv, R_STATUS, TXPL_MASK);
+
+ skb_tx_timestamp(skb);
+
+ return NETDEV_TX_OK;
+}
+
+/**
+ * arc_emac_set_address - Set the MAC address for this device.
+ * @ndev: Pointer to net_device structure.
+ * @p: 6 byte Address to be written as MAC address.
+ *
+ * This function copies the HW address from the sockaddr structure to the
+ * net_device structure and updates the address in HW.
+ *
+ * returns: -EBUSY if the net device is busy or 0 if the address is set
+ * successfully.
+ */
+static int arc_emac_set_address(struct net_device *ndev, void *p)
+{
+ struct arc_emac_priv *priv = netdev_priv(ndev);
+ struct sockaddr *addr = p;
+ unsigned int addr_low, addr_hi;
+
+ if (netif_running(ndev))
+ return -EBUSY;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
+
+ addr_low = le32_to_cpu(*(__le32 *) &ndev->dev_addr[0]);
+ addr_hi = le16_to_cpu(*(__le16 *) &ndev->dev_addr[4]);
+
+ arc_reg_set(priv, R_ADDRL, addr_low);
+ arc_reg_set(priv, R_ADDRH, addr_hi);
+
+ return 0;
+}
+
+static const struct net_device_ops arc_emac_netdev_ops = {
+ .ndo_open = arc_emac_open,
+ .ndo_stop = arc_emac_stop,
+ .ndo_start_xmit = arc_emac_tx,
+ .ndo_set_mac_address = arc_emac_set_address,
+ .ndo_get_stats = arc_emac_stats,
+};
+
+static int arc_emac_probe(struct platform_device *pdev)
+{
+ struct resource res_regs, res_irq;
+ struct device_node *phy_node;
+ struct arc_emac_priv *priv;
+ struct net_device *ndev;
+ const char *mac_addr;
+ unsigned int id, clock_frequency;
+ int err;
+
+ if (!pdev->dev.of_node)
+ return -ENODEV;
+
+ /* Get PHY from device tree */
+ phy_node = of_parse_phandle(pdev->dev.of_node, "phy", 0);
+ if (!phy_node) {
+ dev_err(&pdev->dev, "failed to retrieve phy description from device tree\n");
+ return -ENODEV;
+ }
+
+ /* Get EMAC registers base address from device tree */
+ err = of_address_to_resource(pdev->dev.of_node, 0, &res_regs);
+ if (err) {
+ dev_err(&pdev->dev, "failed to retrieve registers base from device tree\n");
+ return -ENODEV;
+ }
+
+ /* Get CPU clock frequency from device tree */
+ if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+ &clock_frequency)) {
+ dev_err(&pdev->dev, "failed to retrieve <clock-frequency> from device tree\n");
+ return -EINVAL;
+ }
+
+ /* Get IRQ from device tree */
+ err = of_irq_to_resource(pdev->dev.of_node, 0, &res_irq);
+ if (!err) {
+ dev_err(&pdev->dev, "failed to retrieve <irq> value from device tree\n");
+ return -ENODEV;
+ }
+
+ ndev = alloc_etherdev(sizeof(struct arc_emac_priv));
+ if (!ndev)
+ return -ENOMEM;
+
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+
+ ndev->netdev_ops = &arc_emac_netdev_ops;
+ ndev->ethtool_ops = &arc_emac_ethtool_ops;
+ ndev->watchdog_timeo = TX_TIMEOUT;
+ /* FIXME :: no multicast support yet */
+ ndev->flags &= ~IFF_MULTICAST;
+
+ priv = netdev_priv(ndev);
+ priv->dev = &pdev->dev;
+ priv->ndev = ndev;
+
+ priv->regs = devm_ioremap_resource(&pdev->dev, &res_regs);
+ if (IS_ERR(priv->regs)) {
+ err = PTR_ERR(priv->regs);
+ goto out;
+ }
+ dev_dbg(&pdev->dev, "Registers base address is 0x%p\n", priv->regs);
+
+ id = arc_reg_get(priv, R_ID);
+
+ /* Check for EMAC revision 5 or 7, magic number */
+ if (!(id == 0x0005fd02 || id == 0x0007fd02)) {
+ dev_err(&pdev->dev, "ARC EMAC not detected, id=0x%x\n", id);
+ err = -ENODEV;
+ goto out;
+ }
+ dev_info(&pdev->dev, "ARC EMAC detected with id: 0x%x\n", id);
+
+ /* Set poll rate so that it polls every 1 ms */
+ arc_reg_set(priv, R_POLLRATE, clock_frequency / 1000000);
+
+ /* Get max speed of operation from device tree */
+ if (of_property_read_u32(pdev->dev.of_node, "max-speed",
+ &priv->max_speed)) {
+ dev_err(&pdev->dev, "failed to retrieve <max-speed> from device tree\n");
+ err = -EINVAL;
+ goto out;
+ }
+
+ ndev->irq = res_irq.start;
+ dev_info(&pdev->dev, "IRQ is %d\n", ndev->irq);
+
+ /* Register interrupt handler for device */
+ err = devm_request_irq(&pdev->dev, ndev->irq, arc_emac_intr, 0,
+ ndev->name, ndev);
+ if (err) {
+ dev_err(&pdev->dev, "could not allocate IRQ\n");
+ goto out;
+ }
+
+ /* Get MAC address from device tree */
+ mac_addr = of_get_mac_address(pdev->dev.of_node);
+
+ if (!mac_addr || !is_valid_ether_addr(mac_addr))
+ eth_hw_addr_random(ndev);
+ else
+ memcpy(ndev->dev_addr, mac_addr, ETH_ALEN);
+
+ dev_info(&pdev->dev, "MAC address is now %pM\n", ndev->dev_addr);
+
+ /* Do 1 allocation instead of 2 separate ones for Rx and Tx BD rings */
+ priv->rxbd = dmam_alloc_coherent(&pdev->dev, RX_RING_SZ + TX_RING_SZ,
+ &priv->rxbd_dma, GFP_KERNEL);
+
+ if (!priv->rxbd) {
+ dev_err(&pdev->dev, "failed to allocate data buffers\n");
+ err = -ENOMEM;
+ goto out;
+ }
+
+ priv->txbd = priv->rxbd + RX_BD_NUM;
+
+ priv->txbd_dma = priv->rxbd_dma + RX_RING_SZ;
+ dev_dbg(&pdev->dev, "EMAC Device addr: Rx Ring [0x%x], Tx Ring[%x]\n",
+ (unsigned int)priv->rxbd_dma, (unsigned int)priv->txbd_dma);
+
+ err = arc_mdio_probe(pdev, priv);
+ if (err) {
+ dev_err(&pdev->dev, "failed to probe MII bus\n");
+ goto out;
+ }
+
+ priv->phy_dev = of_phy_connect(ndev, phy_node, arc_emac_adjust_link, 0,
+ PHY_INTERFACE_MODE_MII);
+ if (!priv->phy_dev) {
+ dev_err(&pdev->dev, "of_phy_connect() failed\n");
+ err = -ENODEV;
+ goto out;
+ }
+
+ dev_info(&pdev->dev, "connected to %s phy with id 0x%x\n",
+ priv->phy_dev->drv->name, priv->phy_dev->phy_id);
+
+ netif_napi_add(ndev, &priv->napi, arc_emac_poll, ARC_EMAC_NAPI_WEIGHT);
+
+ err = register_netdev(ndev);
+ if (err) {
+ netif_napi_del(&priv->napi);
+ dev_err(&pdev->dev, "failed to register network device\n");
+ goto out;
+ }
+
+ return 0;
+
+out:
+ free_netdev(ndev);
+ return err;
+}
+
+static int arc_emac_remove(struct platform_device *pdev)
+{
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct arc_emac_priv *priv = netdev_priv(ndev);
+
+ phy_disconnect(priv->phy_dev);
+ priv->phy_dev = NULL;
+ arc_mdio_remove(priv);
+ unregister_netdev(ndev);
+ netif_napi_del(&priv->napi);
+ free_netdev(ndev);
+
+ return 0;
+}
+
+static const struct of_device_id arc_emac_dt_ids[] = {
+ { .compatible = "snps,arc-emac" },
+ { /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, arc_emac_dt_ids);
+
+static struct platform_driver arc_emac_driver = {
+ .probe = arc_emac_probe,
+ .remove = arc_emac_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = arc_emac_dt_ids,
+ },
+};
+
+module_platform_driver(arc_emac_driver);
+
+MODULE_AUTHOR("Alexey Brodkin <abrodkin@synopsys.com>");
+MODULE_DESCRIPTION("ARC EMAC driver");
+MODULE_LICENSE("GPL");