netxen: add defs for new chip/boards
Add macros for new chip revision and board configurations.
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 93466ec..a472873 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -609,33 +609,10 @@
void __iomem *offset;
u32 tmp;
int count = 0;
+ uint8_t func = adapter->ahw.pci_func;
if (adapter->curr_window == wndw)
return;
- switch(adapter->ahw.pci_func) {
- case 0:
- offset = PCI_OFFSET_SECOND_RANGE(adapter,
- NETXEN_PCIX_PH_REG(PCIX_CRB_WINDOW));
- break;
- case 1:
- offset = PCI_OFFSET_SECOND_RANGE(adapter,
- NETXEN_PCIX_PH_REG(PCIX_CRB_WINDOW_F1));
- break;
- case 2:
- offset = PCI_OFFSET_SECOND_RANGE(adapter,
- NETXEN_PCIX_PH_REG(PCIX_CRB_WINDOW_F2));
- break;
- case 3:
- offset = PCI_OFFSET_SECOND_RANGE(adapter,
- NETXEN_PCIX_PH_REG(PCIX_CRB_WINDOW_F3));
- break;
- default:
- printk(KERN_INFO "Changing the window for PCI function "
- "%d\n", adapter->ahw.pci_func);
- offset = PCI_OFFSET_SECOND_RANGE(adapter,
- NETXEN_PCIX_PH_REG(PCIX_CRB_WINDOW));
- break;
- }
/*
* Move the CRB window.
* We need to write to the "direct access" region of PCI
@@ -644,6 +621,8 @@
* register address is received by PCI. The direct region bypasses
* the CRB bus.
*/
+ offset = PCI_OFFSET_SECOND_RANGE(adapter,
+ NETXEN_PCIX_PH_REG(PCIE_CRB_WINDOW_REG(func)));
if (wndw & 0x1)
wndw = NETXEN_WINDOW_ONE;
@@ -857,9 +836,11 @@
static unsigned long netxen_nic_pci_set_window(struct netxen_adapter *adapter,
unsigned long long addr)
{
+ void __iomem *offset;
static int ddr_mn_window = -1;
static int qdr_sn_window = -1;
int window;
+ uint8_t func = adapter->ahw.pci_func;
if (ADDR_IN_RANGE(addr, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
/* DDR network side */
@@ -867,13 +848,11 @@
window = (addr >> 25) & 0x3ff;
if (ddr_mn_window != window) {
ddr_mn_window = window;
- writel(window, PCI_OFFSET_SECOND_RANGE(adapter,
- NETXEN_PCIX_PH_REG
- (PCIX_MN_WINDOW(adapter->ahw.pci_func))));
+ offset = PCI_OFFSET_SECOND_RANGE(adapter,
+ NETXEN_PCIX_PH_REG(PCIE_MN_WINDOW_REG(func)));
+ writel(window, offset);
/* MUST make sure window is set before we forge on... */
- readl(PCI_OFFSET_SECOND_RANGE(adapter,
- NETXEN_PCIX_PH_REG
- (PCIX_MN_WINDOW(adapter->ahw.pci_func))));
+ readl(offset);
}
addr -= (window * NETXEN_WINDOW_ONE);
addr += NETXEN_PCI_DDR_NET;
@@ -885,20 +864,17 @@
addr += NETXEN_PCI_OCM1;
} else
if (ADDR_IN_RANGE
- (addr, NETXEN_ADDR_QDR_NET, NETXEN_ADDR_QDR_NET_MAX)) {
+ (addr, NETXEN_ADDR_QDR_NET, NETXEN_ADDR_QDR_NET_MAX_P2)) {
/* QDR network side */
addr -= NETXEN_ADDR_QDR_NET;
window = (addr >> 22) & 0x3f;
if (qdr_sn_window != window) {
qdr_sn_window = window;
- writel((window << 22),
- PCI_OFFSET_SECOND_RANGE(adapter,
- NETXEN_PCIX_PH_REG
- (PCIX_SN_WINDOW(adapter->ahw.pci_func))));
+ offset = PCI_OFFSET_SECOND_RANGE(adapter,
+ NETXEN_PCIX_PH_REG(PCIE_SN_WINDOW_REG(func)));
+ writel((window << 22), offset);
/* MUST make sure window is set before we forge on... */
- readl(PCI_OFFSET_SECOND_RANGE(adapter,
- NETXEN_PCIX_PH_REG
- (PCIX_SN_WINDOW(adapter->ahw.pci_func))));
+ readl(offset);
}
addr -= (window * 0x400000);
addr += NETXEN_PCI_QDR_NET;
@@ -972,12 +948,25 @@
case NETXEN_BRDTYPE_P2_SB31_10G_IMEZ:
case NETXEN_BRDTYPE_P2_SB31_10G_HMEZ:
case NETXEN_BRDTYPE_P2_SB31_10G_CX4:
+ case NETXEN_BRDTYPE_P3_HMEZ:
+ case NETXEN_BRDTYPE_P3_XG_LOM:
+ case NETXEN_BRDTYPE_P3_10G_CX4:
+ case NETXEN_BRDTYPE_P3_10G_CX4_LP:
+ case NETXEN_BRDTYPE_P3_IMEZ:
+ case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
+ case NETXEN_BRDTYPE_P3_10G_XFP:
+ case NETXEN_BRDTYPE_P3_10000_BASE_T:
+
adapter->ahw.board_type = NETXEN_NIC_XGBE;
break;
case NETXEN_BRDTYPE_P1_BD:
case NETXEN_BRDTYPE_P1_SB:
case NETXEN_BRDTYPE_P1_SMAX:
case NETXEN_BRDTYPE_P1_SOCK:
+ case NETXEN_BRDTYPE_P3_REF_QG:
+ case NETXEN_BRDTYPE_P3_4_GB:
+ case NETXEN_BRDTYPE_P3_4_GB_MM:
+
adapter->ahw.board_type = NETXEN_NIC_GBE;
break;
default: