drm/i915: tame the chattermouth (v2)
Many distro's have mechanism in place to collect and automatically file
bugs for failed WARN()s. And since i915 has a lot of hw state sanity
checks which result in WARN(), it generates quite a lot of noise which
is somewhat disconcerting to the end user.
Separate out the internal hw-is-in-the-state-I-expected checks into
I915_STATE_WARN()s and allow configuration via i915.verbose_checks module
param about whether this will generate a full blown stacktrace or just
DRM_ERROR(). The new moduleparam defaults to true, so by default there
is no change in behavior. And even when disabled, you will still get
an error message logged.
v2: paint the macro names blue, clarify that the default behavior
remains the same as before
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 878c485..0a09473 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1024,7 +1024,7 @@
reg = DPLL(pipe);
val = I915_READ(reg);
cur_state = !!(val & DPLL_VCO_ENABLE);
- WARN(cur_state != state,
+ I915_STATE_WARN(cur_state != state,
"PLL state assertion failure (expected %s, current %s)\n",
state_string(state), state_string(cur_state));
}
@@ -1040,7 +1040,7 @@
mutex_unlock(&dev_priv->dpio_lock);
cur_state = val & DSI_PLL_VCO_EN;
- WARN(cur_state != state,
+ I915_STATE_WARN(cur_state != state,
"DSI PLL state assertion failure (expected %s, current %s)\n",
state_string(state), state_string(cur_state));
}
@@ -1071,7 +1071,7 @@
return;
cur_state = pll->get_hw_state(dev_priv, pll, &hw_state);
- WARN(cur_state != state,
+ I915_STATE_WARN(cur_state != state,
"%s assertion failure (expected %s, current %s)\n",
pll->name, state_string(state), state_string(cur_state));
}
@@ -1095,7 +1095,7 @@
val = I915_READ(reg);
cur_state = !!(val & FDI_TX_ENABLE);
}
- WARN(cur_state != state,
+ I915_STATE_WARN(cur_state != state,
"FDI TX state assertion failure (expected %s, current %s)\n",
state_string(state), state_string(cur_state));
}
@@ -1112,7 +1112,7 @@
reg = FDI_RX_CTL(pipe);
val = I915_READ(reg);
cur_state = !!(val & FDI_RX_ENABLE);
- WARN(cur_state != state,
+ I915_STATE_WARN(cur_state != state,
"FDI RX state assertion failure (expected %s, current %s)\n",
state_string(state), state_string(cur_state));
}
@@ -1135,7 +1135,7 @@
reg = FDI_TX_CTL(pipe);
val = I915_READ(reg);
- WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
+ I915_STATE_WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
}
void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
@@ -1148,7 +1148,7 @@
reg = FDI_RX_CTL(pipe);
val = I915_READ(reg);
cur_state = !!(val & FDI_RX_PLL_ENABLE);
- WARN(cur_state != state,
+ I915_STATE_WARN(cur_state != state,
"FDI RX PLL assertion failure (expected %s, current %s)\n",
state_string(state), state_string(cur_state));
}
@@ -1190,7 +1190,7 @@
((val & PANEL_UNLOCK_MASK) == PANEL_UNLOCK_REGS))
locked = false;
- WARN(panel_pipe == pipe && locked,
+ I915_STATE_WARN(panel_pipe == pipe && locked,
"panel assertion failure, pipe %c regs locked\n",
pipe_name(pipe));
}
@@ -1206,7 +1206,7 @@
else
cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
- WARN(cur_state != state,
+ I915_STATE_WARN(cur_state != state,
"cursor on pipe %c assertion failure (expected %s, current %s)\n",
pipe_name(pipe), state_string(state), state_string(cur_state));
}
@@ -1236,7 +1236,7 @@
cur_state = !!(val & PIPECONF_ENABLE);
}
- WARN(cur_state != state,
+ I915_STATE_WARN(cur_state != state,
"pipe %c assertion failure (expected %s, current %s)\n",
pipe_name(pipe), state_string(state), state_string(cur_state));
}
@@ -1251,7 +1251,7 @@
reg = DSPCNTR(plane);
val = I915_READ(reg);
cur_state = !!(val & DISPLAY_PLANE_ENABLE);
- WARN(cur_state != state,
+ I915_STATE_WARN(cur_state != state,
"plane %c assertion failure (expected %s, current %s)\n",
plane_name(plane), state_string(state), state_string(cur_state));
}
@@ -1271,7 +1271,7 @@
if (INTEL_INFO(dev)->gen >= 4) {
reg = DSPCNTR(pipe);
val = I915_READ(reg);
- WARN(val & DISPLAY_PLANE_ENABLE,
+ I915_STATE_WARN(val & DISPLAY_PLANE_ENABLE,
"plane %c assertion failure, should be disabled but not\n",
plane_name(pipe));
return;
@@ -1283,7 +1283,7 @@
val = I915_READ(reg);
cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
DISPPLANE_SEL_PIPE_SHIFT;
- WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
+ I915_STATE_WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
"plane %c assertion failure, should be off on pipe %c but is still active\n",
plane_name(i), pipe_name(pipe));
}
@@ -1299,7 +1299,7 @@
if (INTEL_INFO(dev)->gen >= 9) {
for_each_sprite(pipe, sprite) {
val = I915_READ(PLANE_CTL(pipe, sprite));
- WARN(val & PLANE_CTL_ENABLE,
+ I915_STATE_WARN(val & PLANE_CTL_ENABLE,
"plane %d assertion failure, should be off on pipe %c but is still active\n",
sprite, pipe_name(pipe));
}
@@ -1307,20 +1307,20 @@
for_each_sprite(pipe, sprite) {
reg = SPCNTR(pipe, sprite);
val = I915_READ(reg);
- WARN(val & SP_ENABLE,
+ I915_STATE_WARN(val & SP_ENABLE,
"sprite %c assertion failure, should be off on pipe %c but is still active\n",
sprite_name(pipe, sprite), pipe_name(pipe));
}
} else if (INTEL_INFO(dev)->gen >= 7) {
reg = SPRCTL(pipe);
val = I915_READ(reg);
- WARN(val & SPRITE_ENABLE,
+ I915_STATE_WARN(val & SPRITE_ENABLE,
"sprite %c assertion failure, should be off on pipe %c but is still active\n",
plane_name(pipe), pipe_name(pipe));
} else if (INTEL_INFO(dev)->gen >= 5) {
reg = DVSCNTR(pipe);
val = I915_READ(reg);
- WARN(val & DVS_ENABLE,
+ I915_STATE_WARN(val & DVS_ENABLE,
"sprite %c assertion failure, should be off on pipe %c but is still active\n",
plane_name(pipe), pipe_name(pipe));
}
@@ -1328,7 +1328,7 @@
static void assert_vblank_disabled(struct drm_crtc *crtc)
{
- if (WARN_ON(drm_crtc_vblank_get(crtc) == 0))
+ if (I915_STATE_WARN_ON(drm_crtc_vblank_get(crtc) == 0))
drm_crtc_vblank_put(crtc);
}
@@ -1337,12 +1337,12 @@
u32 val;
bool enabled;
- WARN_ON(!(HAS_PCH_IBX(dev_priv->dev) || HAS_PCH_CPT(dev_priv->dev)));
+ I915_STATE_WARN_ON(!(HAS_PCH_IBX(dev_priv->dev) || HAS_PCH_CPT(dev_priv->dev)));
val = I915_READ(PCH_DREF_CONTROL);
enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
DREF_SUPERSPREAD_SOURCE_MASK));
- WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
+ I915_STATE_WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
}
static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
@@ -1355,7 +1355,7 @@
reg = PCH_TRANSCONF(pipe);
val = I915_READ(reg);
enabled = !!(val & TRANS_ENABLE);
- WARN(enabled,
+ I915_STATE_WARN(enabled,
"transcoder assertion failed, should be off on pipe %c but is still active\n",
pipe_name(pipe));
}
@@ -1435,11 +1435,11 @@
enum pipe pipe, int reg, u32 port_sel)
{
u32 val = I915_READ(reg);
- WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
+ I915_STATE_WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
"PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
reg, pipe_name(pipe));
- WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
+ I915_STATE_WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
&& (val & DP_PIPEB_SELECT),
"IBX PCH dp port still using transcoder B\n");
}
@@ -1448,11 +1448,11 @@
enum pipe pipe, int reg)
{
u32 val = I915_READ(reg);
- WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
+ I915_STATE_WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
"PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
reg, pipe_name(pipe));
- WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
+ I915_STATE_WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
&& (val & SDVO_PIPE_B_SELECT),
"IBX PCH hdmi port still using transcoder B\n");
}
@@ -1469,13 +1469,13 @@
reg = PCH_ADPA;
val = I915_READ(reg);
- WARN(adpa_pipe_enabled(dev_priv, pipe, val),
+ I915_STATE_WARN(adpa_pipe_enabled(dev_priv, pipe, val),
"PCH VGA enabled on transcoder %c, should be disabled\n",
pipe_name(pipe));
reg = PCH_LVDS;
val = I915_READ(reg);
- WARN(lvds_pipe_enabled(dev_priv, pipe, val),
+ I915_STATE_WARN(lvds_pipe_enabled(dev_priv, pipe, val),
"PCH LVDS enabled on transcoder %c, should be disabled\n",
pipe_name(pipe));
@@ -5311,25 +5311,25 @@
if (connector->mst_port)
return;
- WARN(connector->base.dpms == DRM_MODE_DPMS_OFF,
+ I915_STATE_WARN(connector->base.dpms == DRM_MODE_DPMS_OFF,
"wrong connector dpms state\n");
- WARN(connector->base.encoder != &encoder->base,
+ I915_STATE_WARN(connector->base.encoder != &encoder->base,
"active connector not linked to encoder\n");
if (encoder) {
- WARN(!encoder->connectors_active,
+ I915_STATE_WARN(!encoder->connectors_active,
"encoder->connectors_active not set\n");
encoder_enabled = encoder->get_hw_state(encoder, &pipe);
- WARN(!encoder_enabled, "encoder not enabled\n");
- if (WARN_ON(!encoder->base.crtc))
+ I915_STATE_WARN(!encoder_enabled, "encoder not enabled\n");
+ if (I915_STATE_WARN_ON(!encoder->base.crtc))
return;
crtc = encoder->base.crtc;
- WARN(!crtc->enabled, "crtc not enabled\n");
- WARN(!to_intel_crtc(crtc)->active, "crtc not active\n");
- WARN(pipe != to_intel_crtc(crtc)->pipe,
+ I915_STATE_WARN(!crtc->enabled, "crtc not enabled\n");
+ I915_STATE_WARN(!to_intel_crtc(crtc)->active, "crtc not active\n");
+ I915_STATE_WARN(pipe != to_intel_crtc(crtc)->pipe,
"encoder active on the wrong pipe\n");
}
}
@@ -7739,24 +7739,24 @@
struct intel_crtc *crtc;
for_each_intel_crtc(dev, crtc)
- WARN(crtc->active, "CRTC for pipe %c enabled\n",
+ I915_STATE_WARN(crtc->active, "CRTC for pipe %c enabled\n",
pipe_name(crtc->pipe));
- WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on\n");
- WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL enabled\n");
- WARN(I915_READ(WRPLL_CTL1) & WRPLL_PLL_ENABLE, "WRPLL1 enabled\n");
- WARN(I915_READ(WRPLL_CTL2) & WRPLL_PLL_ENABLE, "WRPLL2 enabled\n");
- WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n");
- WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
+ I915_STATE_WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on\n");
+ I915_STATE_WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL enabled\n");
+ I915_STATE_WARN(I915_READ(WRPLL_CTL1) & WRPLL_PLL_ENABLE, "WRPLL1 enabled\n");
+ I915_STATE_WARN(I915_READ(WRPLL_CTL2) & WRPLL_PLL_ENABLE, "WRPLL2 enabled\n");
+ I915_STATE_WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n");
+ I915_STATE_WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
"CPU PWM1 enabled\n");
if (IS_HASWELL(dev))
- WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE,
+ I915_STATE_WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE,
"CPU PWM2 enabled\n");
- WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE,
+ I915_STATE_WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE,
"PCH PWM1 enabled\n");
- WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
+ I915_STATE_WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
"Utility pin enabled\n");
- WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n");
+ I915_STATE_WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n");
/*
* In theory we can still leave IRQs enabled, as long as only the HPD
@@ -7764,7 +7764,7 @@
* gen-specific and since we only disable LCPLL after we fully disable
* the interrupts, the check below should be enough.
*/
- WARN(intel_irqs_enabled(dev_priv), "IRQs enabled\n");
+ I915_STATE_WARN(intel_irqs_enabled(dev_priv), "IRQs enabled\n");
}
static uint32_t hsw_read_dcomp(struct drm_i915_private *dev_priv)
@@ -10640,7 +10640,7 @@
* ->get_hw_state callbacks. */
intel_connector_check_state(connector);
- WARN(&connector->new_encoder->base != connector->base.encoder,
+ I915_STATE_WARN(&connector->new_encoder->base != connector->base.encoder,
"connector's staged encoder doesn't match current encoder\n");
}
}
@@ -10660,9 +10660,9 @@
encoder->base.base.id,
encoder->base.name);
- WARN(&encoder->new_crtc->base != encoder->base.crtc,
+ I915_STATE_WARN(&encoder->new_crtc->base != encoder->base.crtc,
"encoder's stage crtc doesn't match current crtc\n");
- WARN(encoder->connectors_active && !encoder->base.crtc,
+ I915_STATE_WARN(encoder->connectors_active && !encoder->base.crtc,
"encoder's active_connectors set, but no crtc\n");
list_for_each_entry(connector, &dev->mode_config.connector_list,
@@ -10681,19 +10681,19 @@
if (!enabled && encoder->base.encoder_type == DRM_MODE_ENCODER_DPMST)
continue;
- WARN(!!encoder->base.crtc != enabled,
+ I915_STATE_WARN(!!encoder->base.crtc != enabled,
"encoder's enabled state mismatch "
"(expected %i, found %i)\n",
!!encoder->base.crtc, enabled);
- WARN(active && !encoder->base.crtc,
+ I915_STATE_WARN(active && !encoder->base.crtc,
"active encoder with no crtc\n");
- WARN(encoder->connectors_active != active,
+ I915_STATE_WARN(encoder->connectors_active != active,
"encoder's computed active state doesn't match tracked active state "
"(expected %i, found %i)\n", active, encoder->connectors_active);
active = encoder->get_hw_state(encoder, &pipe);
- WARN(active != encoder->connectors_active,
+ I915_STATE_WARN(active != encoder->connectors_active,
"encoder's hw state doesn't match sw tracking "
"(expected %i, found %i)\n",
encoder->connectors_active, active);
@@ -10702,7 +10702,7 @@
continue;
tracked_pipe = to_intel_crtc(encoder->base.crtc)->pipe;
- WARN(active && pipe != tracked_pipe,
+ I915_STATE_WARN(active && pipe != tracked_pipe,
"active encoder's pipe doesn't match"
"(expected %i, found %i)\n",
tracked_pipe, pipe);
@@ -10727,7 +10727,7 @@
DRM_DEBUG_KMS("[CRTC:%d]\n",
crtc->base.base.id);
- WARN(crtc->active && !crtc->base.enabled,
+ I915_STATE_WARN(crtc->active && !crtc->base.enabled,
"active crtc, but not enabled in sw tracking\n");
for_each_intel_encoder(dev, encoder) {
@@ -10738,10 +10738,10 @@
active = true;
}
- WARN(active != crtc->active,
+ I915_STATE_WARN(active != crtc->active,
"crtc's computed active state doesn't match tracked active state "
"(expected %i, found %i)\n", active, crtc->active);
- WARN(enabled != crtc->base.enabled,
+ I915_STATE_WARN(enabled != crtc->base.enabled,
"crtc's computed enabled state doesn't match tracked enabled state "
"(expected %i, found %i)\n", enabled, crtc->base.enabled);
@@ -10761,13 +10761,13 @@
encoder->get_config(encoder, &pipe_config);
}
- WARN(crtc->active != active,
+ I915_STATE_WARN(crtc->active != active,
"crtc active state doesn't match with hw state "
"(expected %i, found %i)\n", crtc->active, active);
if (active &&
!intel_pipe_config_compare(dev, &crtc->config, &pipe_config)) {
- WARN(1, "pipe state doesn't match!\n");
+ I915_STATE_WARN(1, "pipe state doesn't match!\n");
intel_dump_pipe_config(crtc, &pipe_config,
"[hw state]");
intel_dump_pipe_config(crtc, &crtc->config,
@@ -10795,14 +10795,14 @@
active = pll->get_hw_state(dev_priv, pll, &dpll_hw_state);
- WARN(pll->active > hweight32(pll->config.crtc_mask),
+ I915_STATE_WARN(pll->active > hweight32(pll->config.crtc_mask),
"more active pll users than references: %i vs %i\n",
pll->active, hweight32(pll->config.crtc_mask));
- WARN(pll->active && !pll->on,
+ I915_STATE_WARN(pll->active && !pll->on,
"pll in active use but not on in sw tracking\n");
- WARN(pll->on && !pll->active,
+ I915_STATE_WARN(pll->on && !pll->active,
"pll in on but not on in use in sw tracking\n");
- WARN(pll->on != active,
+ I915_STATE_WARN(pll->on != active,
"pll on state mismatch (expected %i, found %i)\n",
pll->on, active);
@@ -10812,14 +10812,14 @@
if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll)
active_crtcs++;
}
- WARN(pll->active != active_crtcs,
+ I915_STATE_WARN(pll->active != active_crtcs,
"pll active crtcs mismatch (expected %i, found %i)\n",
pll->active, active_crtcs);
- WARN(hweight32(pll->config.crtc_mask) != enabled_crtcs,
+ I915_STATE_WARN(hweight32(pll->config.crtc_mask) != enabled_crtcs,
"pll enabled crtcs mismatch (expected %i, found %i)\n",
hweight32(pll->config.crtc_mask), enabled_crtcs);
- WARN(pll->on && memcmp(&pll->config.hw_state, &dpll_hw_state,
+ I915_STATE_WARN(pll->on && memcmp(&pll->config.hw_state, &dpll_hw_state,
sizeof(dpll_hw_state)),
"pll hw state mismatch\n");
}