powerpc: Add dma nodes to 83xx, 85xx and 86xx boards
Added DMA nodes for the elo/elo-plus DMA engines.
Renamed the interrupt controller alias in mpc832x_rdb.dts to ipic so that
its the same as all the other boards.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 179c81c..a798d863 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -68,7 +68,7 @@
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
dfsrr;
};
@@ -79,7 +79,7 @@
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
};
serial1: serial@4600 {
@@ -89,7 +89,42 @@
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
+ };
+
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
};
crypto@30000 {
@@ -98,7 +133,7 @@
compatible = "talitos";
reg = <0x30000 0x7000>;
interrupts = <11 0x8>;
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
/* Rev. 2.2 */
num-channels = <1>;
channel-fifo-len = <24>;
@@ -106,7 +141,7 @@
descriptor-types-mask = <0x0122003f>;
};
- pic:pic@700 {
+ ipic:pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
@@ -240,13 +275,13 @@
compatible = "fsl,ucc-mdio";
phy00:ethernet-phy@00 {
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
interrupts = <0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy04:ethernet-phy@04 {
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
interrupts = <0>;
reg = <0x4>;
device_type = "ethernet-phy";
@@ -261,7 +296,7 @@
reg = <0x80 0x80>;
big-endian;
interrupts = <32 0x8 33 0x8>; //high:32 low:33
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
};
};
@@ -270,21 +305,21 @@
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x10 AD16 (USB) */
- 0x8000 0x0 0x0 0x1 &pic 17 0x8
+ 0x8000 0x0 0x0 0x1 &ipic 17 0x8
/* IDSEL 0x11 AD17 (Mini1)*/
- 0x8800 0x0 0x0 0x1 &pic 18 0x8
- 0x8800 0x0 0x0 0x2 &pic 19 0x8
- 0x8800 0x0 0x0 0x3 &pic 20 0x8
- 0x8800 0x0 0x0 0x4 &pic 48 0x8
+ 0x8800 0x0 0x0 0x1 &ipic 18 0x8
+ 0x8800 0x0 0x0 0x2 &ipic 19 0x8
+ 0x8800 0x0 0x0 0x3 &ipic 20 0x8
+ 0x8800 0x0 0x0 0x4 &ipic 48 0x8
/* IDSEL 0x12 AD18 (PCI/Mini2) */
- 0x9000 0x0 0x0 0x1 &pic 19 0x8
- 0x9000 0x0 0x0 0x2 &pic 20 0x8
- 0x9000 0x0 0x0 0x3 &pic 48 0x8
- 0x9000 0x0 0x0 0x4 &pic 17 0x8>;
+ 0x9000 0x0 0x0 0x1 &ipic 19 0x8
+ 0x9000 0x0 0x0 0x2 &ipic 20 0x8
+ 0x9000 0x0 0x0 0x3 &ipic 48 0x8
+ 0x9000 0x0 0x0 0x4 &ipic 17 0x8>;
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
interrupts = <66 0x8>;
bus-range = <0x0 0x0>;
ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000