net: dsa: mv88e6xxx: add support for mv88e6393x family
The Marvell 88E6393X device is a single-chip integration of a 11-port
Ethernet switch with eight integrated Gigabit Ethernet (GbE)
transceivers and three 10-Gigabit interfaces.
This patch adds functionalities specific to mv88e6393x family (88E6393X,
88E6193X and 88E6191X).
The main differences between previous devices and this one are:
- port 0 can be a SERDES port
- all SERDESes are one-lane, eg. no XAUI nor RXAUI
- on the other hand the SERDESes can do USXGMII, 10GBASER and 5GBASER
(on 6191X only one SERDES is capable of more than 1g; USXGMII is not
yet supported with this change)
- Port Policy CTL register is changed to Port Policy MGMT CTL register,
via which several more registers can be accessed indirectly
- egress monitor port is configured differently
- ingress monitor/CPU/mirror ports are configured differently and can be
configured per port (ie. each port can have different ingress monitor
port, for example)
- port speed AltBit works differently than previously
- PHY registers can be also accessed via MDIO address 0x18 and 0x19
(on previous devices they could be accessed only via Global 2 offsets
0x18 and 0x19, which means two indirections; this feature is not yet
leveraged with thiis commit)
Co-developed-by: Ashkan Boldaji <ashkan.boldaji@digi.com>
Signed-off-by: Ashkan Boldaji <ashkan.boldaji@digi.com>
Signed-off-by: Pavana Sharma <pavana.sharma@digi.com>
Co-developed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index fc9d387..0ffeb73 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -635,6 +635,29 @@ static void mv88e6390x_phylink_validate(struct mv88e6xxx_chip *chip, int port,
mv88e6390_phylink_validate(chip, port, mask, state);
}
+static void mv88e6393x_phylink_validate(struct mv88e6xxx_chip *chip, int port,
+ unsigned long *mask,
+ struct phylink_link_state *state)
+{
+ if (port == 0 || port == 9 || port == 10) {
+ phylink_set(mask, 10000baseT_Full);
+ phylink_set(mask, 10000baseKR_Full);
+ phylink_set(mask, 10000baseCR_Full);
+ phylink_set(mask, 10000baseSR_Full);
+ phylink_set(mask, 10000baseLR_Full);
+ phylink_set(mask, 10000baseLRM_Full);
+ phylink_set(mask, 10000baseER_Full);
+ phylink_set(mask, 5000baseT_Full);
+ phylink_set(mask, 2500baseX_Full);
+ phylink_set(mask, 2500baseT_Full);
+ }
+
+ phylink_set(mask, 1000baseT_Full);
+ phylink_set(mask, 1000baseX_Full);
+
+ mv88e6065_phylink_validate(chip, port, mask, state);
+}
+
static void mv88e6xxx_validate(struct dsa_switch *ds, int port,
unsigned long *supported,
struct phylink_link_state *state)
@@ -4589,6 +4612,69 @@ static const struct mv88e6xxx_ops mv88e6390x_ops = {
.phylink_validate = mv88e6390x_phylink_validate,
};
+static const struct mv88e6xxx_ops mv88e6393x_ops = {
+ /* MV88E6XXX_FAMILY_6393 */
+ .setup_errata = mv88e6393x_serdes_setup_errata,
+ .irl_init_all = mv88e6390_g2_irl_init_all,
+ .get_eeprom = mv88e6xxx_g2_get_eeprom8,
+ .set_eeprom = mv88e6xxx_g2_set_eeprom8,
+ .set_switch_mac = mv88e6xxx_g2_set_switch_mac,
+ .phy_read = mv88e6xxx_g2_smi_phy_read,
+ .phy_write = mv88e6xxx_g2_smi_phy_write,
+ .port_set_link = mv88e6xxx_port_set_link,
+ .port_sync_link = mv88e6xxx_port_sync_link,
+ .port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
+ .port_set_speed_duplex = mv88e6393x_port_set_speed_duplex,
+ .port_max_speed_mode = mv88e6393x_port_max_speed_mode,
+ .port_tag_remap = mv88e6390_port_tag_remap,
+ .port_set_frame_mode = mv88e6351_port_set_frame_mode,
+ .port_set_ucast_flood = mv88e6352_port_set_ucast_flood,
+ .port_set_mcast_flood = mv88e6352_port_set_mcast_flood,
+ .port_set_ether_type = mv88e6393x_port_set_ether_type,
+ .port_set_jumbo_size = mv88e6165_port_set_jumbo_size,
+ .port_egress_rate_limiting = mv88e6097_port_egress_rate_limiting,
+ .port_pause_limit = mv88e6390_port_pause_limit,
+ .port_disable_learn_limit = mv88e6xxx_port_disable_learn_limit,
+ .port_disable_pri_override = mv88e6xxx_port_disable_pri_override,
+ .port_get_cmode = mv88e6352_port_get_cmode,
+ .port_set_cmode = mv88e6393x_port_set_cmode,
+ .port_setup_message_port = mv88e6xxx_setup_message_port,
+ .port_set_upstream_port = mv88e6393x_port_set_upstream_port,
+ .stats_snapshot = mv88e6390_g1_stats_snapshot,
+ .stats_set_histogram = mv88e6390_g1_stats_set_histogram,
+ .stats_get_sset_count = mv88e6320_stats_get_sset_count,
+ .stats_get_strings = mv88e6320_stats_get_strings,
+ .stats_get_stats = mv88e6390_stats_get_stats,
+ /* .set_cpu_port is missing because this family does not support a global
+ * CPU port, only per port CPU port which is set via
+ * .port_set_upstream_port method.
+ */
+ .set_egress_port = mv88e6393x_set_egress_port,
+ .watchdog_ops = &mv88e6390_watchdog_ops,
+ .mgmt_rsvd2cpu = mv88e6393x_port_mgmt_rsvd2cpu,
+ .pot_clear = mv88e6xxx_g2_pot_clear,
+ .reset = mv88e6352_g1_reset,
+ .rmu_disable = mv88e6390_g1_rmu_disable,
+ .atu_get_hash = mv88e6165_g1_atu_get_hash,
+ .atu_set_hash = mv88e6165_g1_atu_set_hash,
+ .vtu_getnext = mv88e6390_g1_vtu_getnext,
+ .vtu_loadpurge = mv88e6390_g1_vtu_loadpurge,
+ .serdes_power = mv88e6393x_serdes_power,
+ .serdes_get_lane = mv88e6393x_serdes_get_lane,
+ .serdes_pcs_get_state = mv88e6393x_serdes_pcs_get_state,
+ .serdes_pcs_config = mv88e6390_serdes_pcs_config,
+ .serdes_pcs_an_restart = mv88e6390_serdes_pcs_an_restart,
+ .serdes_pcs_link_up = mv88e6390_serdes_pcs_link_up,
+ .serdes_irq_mapping = mv88e6390_serdes_irq_mapping,
+ .serdes_irq_enable = mv88e6393x_serdes_irq_enable,
+ .serdes_irq_status = mv88e6393x_serdes_irq_status,
+ /* TODO: serdes stats */
+ .gpio_ops = &mv88e6352_gpio_ops,
+ .avb_ops = &mv88e6390_avb_ops,
+ .ptp_ops = &mv88e6352_ptp_ops,
+ .phylink_validate = mv88e6393x_phylink_validate,
+};
+
static const struct mv88e6xxx_info mv88e6xxx_table[] = {
[MV88E6085] = {
.prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6085,
@@ -4960,6 +5046,52 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.ops = &mv88e6191_ops,
},
+ [MV88E6191X] = {
+ .prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6191X,
+ .family = MV88E6XXX_FAMILY_6393,
+ .name = "Marvell 88E6191X",
+ .num_databases = 4096,
+ .num_ports = 11, /* 10 + Z80 */
+ .num_internal_phys = 9,
+ .max_vid = 8191,
+ .port_base_addr = 0x0,
+ .phy_base_addr = 0x0,
+ .global1_addr = 0x1b,
+ .global2_addr = 0x1c,
+ .age_time_coeff = 3750,
+ .g1_irqs = 10,
+ .g2_irqs = 14,
+ .atu_move_port_mask = 0x1f,
+ .pvt = true,
+ .multi_chip = true,
+ .tag_protocol = DSA_TAG_PROTO_DSA,
+ .ptp_support = true,
+ .ops = &mv88e6393x_ops,
+ },
+
+ [MV88E6193X] = {
+ .prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6193X,
+ .family = MV88E6XXX_FAMILY_6393,
+ .name = "Marvell 88E6193X",
+ .num_databases = 4096,
+ .num_ports = 11, /* 10 + Z80 */
+ .num_internal_phys = 9,
+ .max_vid = 8191,
+ .port_base_addr = 0x0,
+ .phy_base_addr = 0x0,
+ .global1_addr = 0x1b,
+ .global2_addr = 0x1c,
+ .age_time_coeff = 3750,
+ .g1_irqs = 10,
+ .g2_irqs = 14,
+ .atu_move_port_mask = 0x1f,
+ .pvt = true,
+ .multi_chip = true,
+ .tag_protocol = DSA_TAG_PROTO_DSA,
+ .ptp_support = true,
+ .ops = &mv88e6393x_ops,
+ },
+
[MV88E6220] = {
.prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6220,
.family = MV88E6XXX_FAMILY_6250,
@@ -5250,6 +5382,29 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.ptp_support = true,
.ops = &mv88e6390x_ops,
},
+
+ [MV88E6393X] = {
+ .prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6393X,
+ .family = MV88E6XXX_FAMILY_6393,
+ .name = "Marvell 88E6393X",
+ .num_databases = 4096,
+ .num_ports = 11, /* 10 + Z80 */
+ .num_internal_phys = 9,
+ .max_vid = 8191,
+ .port_base_addr = 0x0,
+ .phy_base_addr = 0x0,
+ .global1_addr = 0x1b,
+ .global2_addr = 0x1c,
+ .age_time_coeff = 3750,
+ .g1_irqs = 10,
+ .g2_irqs = 14,
+ .atu_move_port_mask = 0x1f,
+ .pvt = true,
+ .multi_chip = true,
+ .tag_protocol = DSA_TAG_PROTO_DSA,
+ .ptp_support = true,
+ .ops = &mv88e6393x_ops,
+ },
};
static const struct mv88e6xxx_info *mv88e6xxx_lookup_info(unsigned int prod_num)