net: phy: switch drivers to use dynamic feature detection
Recently genphy_read_abilities() has been added that dynamically detects
clause 22 PHY abilities. I *think* this detection should work with all
supported PHY's, at least for the ones with basic features sets, i.e.
PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these
features explicitly and rely on phylib feature detection.
I don't have access to most of these PHY's, therefore I'd appreciate
regression testing.
v2:
- make the feature constant a comment so that readers know which
features are supported by the respective PHY
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index a75e1b2..8fc3386 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -538,7 +538,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.phy_id = (_oui), \
.phy_id_mask = 0xfffffff0, \
.name = _name, \
- .features = PHY_GBIT_FEATURES, \
+ /* PHY_GBIT_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
.config_init = bcm7xxx_28nm_config_init, \
.resume = bcm7xxx_28nm_resume, \
@@ -555,7 +555,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.phy_id = (_oui), \
.phy_id_mask = 0xfffffff0, \
.name = _name, \
- .features = PHY_BASIC_FEATURES, \
+ /* PHY_BASIC_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
.config_init = bcm7xxx_28nm_ephy_config_init, \
.resume = bcm7xxx_28nm_ephy_resume, \
@@ -570,7 +570,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.phy_id = (_oui), \
.phy_id_mask = 0xfffffff0, \
.name = _name, \
- .features = PHY_BASIC_FEATURES, \
+ /* PHY_BASIC_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
.config_init = bcm7xxx_config_init, \
.suspend = bcm7xxx_suspend, \