spi: stm32h7: rework rx fifo read function
Remove flush parameter and check RXWNE or RXPLVL when end of transfer
flag is set.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1625646426-5826-6-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index d37bfea..c2144e3 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -570,29 +570,30 @@ static void stm32f4_spi_read_rx(struct stm32_spi *spi)
/**
* stm32h7_spi_read_rxfifo - Read bytes in Receive Data Register
* @spi: pointer to the spi controller data structure
- * @flush: boolean indicating that FIFO should be flushed
*
* Write in rx_buf depends on remaining bytes to avoid to write beyond
* rx_buf end.
*/
-static void stm32h7_spi_read_rxfifo(struct stm32_spi *spi, bool flush)
+static void stm32h7_spi_read_rxfifo(struct stm32_spi *spi)
{
u32 sr = readl_relaxed(spi->base + STM32H7_SPI_SR);
u32 rxplvl = FIELD_GET(STM32H7_SPI_SR_RXPLVL, sr);
while ((spi->rx_len > 0) &&
((sr & STM32H7_SPI_SR_RXP) ||
- (flush && ((sr & STM32H7_SPI_SR_RXWNE) || (rxplvl > 0))))) {
+ ((sr & STM32H7_SPI_SR_EOT) &&
+ ((sr & STM32H7_SPI_SR_RXWNE) || (rxplvl > 0))))) {
u32 offs = spi->cur_xferlen - spi->rx_len;
if ((spi->rx_len >= sizeof(u32)) ||
- (flush && (sr & STM32H7_SPI_SR_RXWNE))) {
+ (sr & STM32H7_SPI_SR_RXWNE)) {
u32 *rx_buf32 = (u32 *)(spi->rx_buf + offs);
*rx_buf32 = readl_relaxed(spi->base + STM32H7_SPI_RXDR);
spi->rx_len -= sizeof(u32);
} else if ((spi->rx_len >= sizeof(u16)) ||
- (flush && (rxplvl >= 2 || spi->cur_bpw > 8))) {
+ (!(sr & STM32H7_SPI_SR_RXWNE) &&
+ (rxplvl >= 2 || spi->cur_bpw > 8))) {
u16 *rx_buf16 = (u16 *)(spi->rx_buf + offs);
*rx_buf16 = readw_relaxed(spi->base + STM32H7_SPI_RXDR);
@@ -608,8 +609,8 @@ static void stm32h7_spi_read_rxfifo(struct stm32_spi *spi, bool flush)
rxplvl = FIELD_GET(STM32H7_SPI_SR_RXPLVL, sr);
}
- dev_dbg(spi->dev, "%s%s: %d bytes left\n", __func__,
- flush ? "(flush)" : "", spi->rx_len);
+ dev_dbg(spi->dev, "%s: %d bytes left (sr=%08x)\n",
+ __func__, spi->rx_len, sr);
}
/**
@@ -677,12 +678,7 @@ static void stm32f4_spi_disable(struct stm32_spi *spi)
* @spi: pointer to the spi controller data structure
*
* RX-Fifo is flushed when SPI controller is disabled. To prevent any data
- * loss, use stm32h7_spi_read_rxfifo(flush) to read the remaining bytes in
- * RX-Fifo.
- * Normally, if TSIZE has been configured, we should relax the hardware at the
- * reception of the EOT interrupt. But in case of error, EOT will not be
- * raised. So the subsystem unprepare_message call allows us to properly
- * complete the transfer from an hardware point of view.
+ * loss, use stm32_spi_read_rxfifo to read the remaining bytes in RX-Fifo.
*/
static void stm32h7_spi_disable(struct stm32_spi *spi)
{
@@ -717,7 +713,7 @@ static void stm32h7_spi_disable(struct stm32_spi *spi)
}
if (!spi->cur_usedma && spi->rx_buf && (spi->rx_len > 0))
- stm32h7_spi_read_rxfifo(spi, true);
+ stm32h7_spi_read_rxfifo(spi);
if (spi->cur_usedma && spi->dma_tx)
dmaengine_terminate_all(spi->dma_tx);
@@ -913,7 +909,7 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
if (__ratelimit(&rs))
dev_dbg_ratelimited(spi->dev, "Communication suspended\n");
if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))
- stm32h7_spi_read_rxfifo(spi, false);
+ stm32h7_spi_read_rxfifo(spi);
/*
* If communication is suspended while using DMA, it means
* that something went wrong, so stop the current transfer
@@ -934,7 +930,7 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
if (sr & STM32H7_SPI_SR_EOT) {
if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))
- stm32h7_spi_read_rxfifo(spi, true);
+ stm32h7_spi_read_rxfifo(spi);
end = true;
}
@@ -944,7 +940,7 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
if (sr & STM32H7_SPI_SR_RXP)
if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))
- stm32h7_spi_read_rxfifo(spi, false);
+ stm32h7_spi_read_rxfifo(spi);
writel_relaxed(sr & mask, spi->base + STM32H7_SPI_IFCR);