regulator: max8952: Convert to devm_gpio_request_one()
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c
index c2792f0..f7f9efc 100644
--- a/drivers/regulator/max8952.c
+++ b/drivers/regulator/max8952.c
@@ -229,7 +229,6 @@
config.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
rdev = devm_regulator_register(&client->dev, ®ulator, &config);
-
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
dev_err(&client->dev, "regulator init failed (%d)\n", ret);
@@ -241,21 +240,19 @@
if (gpio_is_valid(pdata->gpio_vid0) &&
gpio_is_valid(pdata->gpio_vid1)) {
- if (!gpio_request(pdata->gpio_vid0, "MAX8952 VID0"))
- gpio_direction_output(pdata->gpio_vid0,
- (pdata->default_mode) & 0x1);
- else
+ unsigned long gpio_flags;
+
+ gpio_flags = max8952->vid0 ?
+ GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
+ if (devm_gpio_request_one(&client->dev, pdata->gpio_vid0,
+ gpio_flags, "MAX8952 VID0"))
err = 1;
- if (!gpio_request(pdata->gpio_vid1, "MAX8952 VID1"))
- gpio_direction_output(pdata->gpio_vid1,
- (pdata->default_mode >> 1) & 0x1);
- else {
- if (!err)
- gpio_free(pdata->gpio_vid0);
+ gpio_flags = max8952->vid1 ?
+ GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
+ if (devm_gpio_request_one(&client->dev, pdata->gpio_vid1,
+ gpio_flags, "MAX8952 VID1"))
err = 2;
- }
-
} else
err = 3;
@@ -314,16 +311,6 @@
return 0;
}
-static int max8952_pmic_remove(struct i2c_client *client)
-{
- struct max8952_data *max8952 = i2c_get_clientdata(client);
- struct max8952_platform_data *pdata = max8952->pdata;
-
- gpio_free(pdata->gpio_vid0);
- gpio_free(pdata->gpio_vid1);
- return 0;
-}
-
static const struct i2c_device_id max8952_ids[] = {
{ "max8952", 0 },
{ },
@@ -332,7 +319,6 @@
static struct i2c_driver max8952_pmic_driver = {
.probe = max8952_pmic_probe,
- .remove = max8952_pmic_remove,
.driver = {
.name = "max8952",
.of_match_table = of_match_ptr(max8952_dt_match),