drm/i915: extract hsw_power_well_post_{enable, disable}
I want to add more code to the post_enable function.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 2590a5c..d8fb00a 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -5681,12 +5681,53 @@
return is_enabled;
}
+static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ unsigned long irqflags;
+
+ if (IS_BROADWELL(dev)) {
+ spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ I915_WRITE(GEN8_DE_PIPE_IMR(PIPE_B),
+ dev_priv->de_irq_mask[PIPE_B]);
+ I915_WRITE(GEN8_DE_PIPE_IER(PIPE_B),
+ ~dev_priv->de_irq_mask[PIPE_B] |
+ GEN8_PIPE_VBLANK);
+ I915_WRITE(GEN8_DE_PIPE_IMR(PIPE_C),
+ dev_priv->de_irq_mask[PIPE_C]);
+ I915_WRITE(GEN8_DE_PIPE_IER(PIPE_C),
+ ~dev_priv->de_irq_mask[PIPE_C] |
+ GEN8_PIPE_VBLANK);
+ POSTING_READ(GEN8_DE_PIPE_IER(PIPE_C));
+ spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ }
+}
+
+static void hsw_power_well_post_disable(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ enum pipe p;
+ unsigned long irqflags;
+
+ /*
+ * After this, the registers on the pipes that are part of the power
+ * well will become zero, so we have to adjust our counters according to
+ * that.
+ *
+ * FIXME: Should we do this in general in drm_vblank_post_modeset?
+ */
+ spin_lock_irqsave(&dev->vbl_lock, irqflags);
+ for_each_pipe(p)
+ if (p != PIPE_A)
+ dev->vblank[p].last = 0;
+ spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
+}
+
static void hsw_set_power_well(struct drm_device *dev,
struct i915_power_well *power_well, bool enable)
{
struct drm_i915_private *dev_priv = dev->dev_private;
bool is_enabled, enable_requested;
- unsigned long irqflags;
uint32_t tmp;
WARN_ON(dev_priv->pc8.enabled);
@@ -5707,42 +5748,14 @@
DRM_ERROR("Timeout enabling power well\n");
}
- if (IS_BROADWELL(dev)) {
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
- I915_WRITE(GEN8_DE_PIPE_IMR(PIPE_B),
- dev_priv->de_irq_mask[PIPE_B]);
- I915_WRITE(GEN8_DE_PIPE_IER(PIPE_B),
- ~dev_priv->de_irq_mask[PIPE_B] |
- GEN8_PIPE_VBLANK);
- I915_WRITE(GEN8_DE_PIPE_IMR(PIPE_C),
- dev_priv->de_irq_mask[PIPE_C]);
- I915_WRITE(GEN8_DE_PIPE_IER(PIPE_C),
- ~dev_priv->de_irq_mask[PIPE_C] |
- GEN8_PIPE_VBLANK);
- POSTING_READ(GEN8_DE_PIPE_IER(PIPE_C));
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
- }
+ hsw_power_well_post_enable(dev_priv);
} else {
if (enable_requested) {
- enum pipe p;
-
I915_WRITE(HSW_PWR_WELL_DRIVER, 0);
POSTING_READ(HSW_PWR_WELL_DRIVER);
DRM_DEBUG_KMS("Requesting to disable the power well\n");
- /*
- * After this, the registers on the pipes that are part
- * of the power well will become zero, so we have to
- * adjust our counters according to that.
- *
- * FIXME: Should we do this in general in
- * drm_vblank_post_modeset?
- */
- spin_lock_irqsave(&dev->vbl_lock, irqflags);
- for_each_pipe(p)
- if (p != PIPE_A)
- dev->vblank[p].last = 0;
- spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
+ hsw_power_well_post_disable(dev_priv);
}
}
}