MIPS: ingenic: DTS: Respect cell count of common properties
If N fields of X cells should be provided, then that's what the
devicetree should represent, instead of having one single field of
(N*X) cells.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index 1c94f67..15780fb 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -58,9 +58,9 @@ tcu: timer@10002000 {
#clock-cells = <1>;
- clocks = <&cgu JZ4780_CLK_RTCLK
- &cgu JZ4780_CLK_EXCLK
- &cgu JZ4780_CLK_PCLK>;
+ clocks = <&cgu JZ4780_CLK_RTCLK>,
+ <&cgu JZ4780_CLK_EXCLK>,
+ <&cgu JZ4780_CLK_PCLK>;
clock-names = "rtc", "ext", "pclk";
interrupt-controller;
@@ -196,8 +196,7 @@ spi_gpio {
gpio-miso = <&gpe 14 0>;
gpio-sck = <&gpe 15 0>;
gpio-mosi = <&gpe 17 0>;
- cs-gpios = <&gpe 16 0
- &gpe 18 0>;
+ cs-gpios = <&gpe 16 0>, <&gpe 18 0>;
spidev@0 {
compatible = "spidev";
@@ -362,13 +361,13 @@ nemc: nemc@13410000 {
reg = <0x13410000 0x10000>;
#address-cells = <2>;
#size-cells = <1>;
- ranges = <0 0 0x13410000 0x10000
- 1 0 0x1b000000 0x1000000
- 2 0 0x1a000000 0x1000000
- 3 0 0x19000000 0x1000000
- 4 0 0x18000000 0x1000000
- 5 0 0x17000000 0x1000000
- 6 0 0x16000000 0x1000000>;
+ ranges = <0 0 0x13410000 0x10000>,
+ <1 0 0x1b000000 0x1000000>,
+ <2 0 0x1a000000 0x1000000>,
+ <3 0 0x19000000 0x1000000>,
+ <4 0 0x18000000 0x1000000>,
+ <5 0 0x17000000 0x1000000>,
+ <6 0 0x16000000 0x1000000>;
clocks = <&cgu JZ4780_CLK_NEMC>;
@@ -391,8 +390,7 @@ eth0_addr: eth-mac-addr@0x22 {
dma: dma@13420000 {
compatible = "ingenic,jz4780-dma";
- reg = <0x13420000 0x400
- 0x13421000 0x40>;
+ reg = <0x13420000 0x400>, <0x13421000 0x40>;
#dma-cells = <2>;
interrupt-parent = <&intc>;