Merge remote-tracking branches 'asoc/topic/rt5677', 'asoc/topic/samsung' and 'asoc/topic/sgtl5000' into asoc-next
diff --git a/Documentation/devicetree/bindings/sound/rt5677.txt b/Documentation/devicetree/bindings/sound/rt5677.txt
index 740ff77..f070789 100644
--- a/Documentation/devicetree/bindings/sound/rt5677.txt
+++ b/Documentation/devicetree/bindings/sound/rt5677.txt
@@ -18,6 +18,7 @@
Optional properties:
- realtek,pow-ldo2-gpio : The GPIO that controls the CODEC's POW_LDO2 pin.
+- realtek,reset-gpio : The GPIO that controls the CODEC's RESET pin.
- realtek,in1-differential
- realtek,in2-differential
@@ -70,6 +71,7 @@
realtek,pow-ldo2-gpio =
<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+ realtek,reset-gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_LOW>;
realtek,in1-differential = "true";
realtek,gpio-config = /bits/ 8 <0 0 0 0 0 2>; /* pull up GPIO6 */
realtek,jd2-gpio = <3>; /* Enables Jack detection for GPIO6 */
diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index fe55816..31d969a 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -1060,6 +1060,7 @@
unsigned int asrc5_mask = 0, asrc5_value = 0;
unsigned int asrc6_mask = 0, asrc6_value = 0;
unsigned int asrc7_mask = 0, asrc7_value = 0;
+ unsigned int asrc8_mask = 0, asrc8_value = 0;
switch (clk_src) {
case RT5677_CLK_SEL_SYS:
@@ -1196,10 +1197,108 @@
regmap_update_bits(rt5677->regmap, RT5677_ASRC_7, asrc7_mask,
asrc7_value);
+ /* ASRC 8 */
+ if (filter_mask & RT5677_I2S1_SOURCE) {
+ asrc8_mask |= RT5677_I2S1_CLK_SEL_MASK;
+ asrc8_value = (asrc8_value & ~RT5677_I2S1_CLK_SEL_MASK)
+ | ((clk_src - 1) << RT5677_I2S1_CLK_SEL_SFT);
+ }
+
+ if (filter_mask & RT5677_I2S2_SOURCE) {
+ asrc8_mask |= RT5677_I2S2_CLK_SEL_MASK;
+ asrc8_value = (asrc8_value & ~RT5677_I2S2_CLK_SEL_MASK)
+ | ((clk_src - 1) << RT5677_I2S2_CLK_SEL_SFT);
+ }
+
+ if (filter_mask & RT5677_I2S3_SOURCE) {
+ asrc8_mask |= RT5677_I2S3_CLK_SEL_MASK;
+ asrc8_value = (asrc8_value & ~RT5677_I2S3_CLK_SEL_MASK)
+ | ((clk_src - 1) << RT5677_I2S3_CLK_SEL_SFT);
+ }
+
+ if (filter_mask & RT5677_I2S4_SOURCE) {
+ asrc8_mask |= RT5677_I2S4_CLK_SEL_MASK;
+ asrc8_value = (asrc8_value & ~RT5677_I2S4_CLK_SEL_MASK)
+ | ((clk_src - 1) << RT5677_I2S4_CLK_SEL_SFT);
+ }
+
+ if (asrc8_mask)
+ regmap_update_bits(rt5677->regmap, RT5677_ASRC_8, asrc8_mask,
+ asrc8_value);
+
return 0;
}
EXPORT_SYMBOL_GPL(rt5677_sel_asrc_clk_src);
+static int rt5677_dmic_use_asrc(struct snd_soc_dapm_widget *source,
+ struct snd_soc_dapm_widget *sink)
+{
+ struct snd_soc_codec *codec = snd_soc_dapm_to_codec(source->dapm);
+ struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
+ unsigned int asrc_setting;
+
+ switch (source->shift) {
+ case 11:
+ regmap_read(rt5677->regmap, RT5677_ASRC_5, &asrc_setting);
+ asrc_setting = (asrc_setting & RT5677_AD_STO1_CLK_SEL_MASK) >>
+ RT5677_AD_STO1_CLK_SEL_SFT;
+ if (asrc_setting >= RT5677_CLK_SEL_I2S1_ASRC &&
+ asrc_setting <= RT5677_CLK_SEL_I2S6_ASRC)
+ return 1;
+ break;
+
+ case 10:
+ regmap_read(rt5677->regmap, RT5677_ASRC_5, &asrc_setting);
+ asrc_setting = (asrc_setting & RT5677_AD_STO2_CLK_SEL_MASK) >>
+ RT5677_AD_STO2_CLK_SEL_SFT;
+ if (asrc_setting >= RT5677_CLK_SEL_I2S1_ASRC &&
+ asrc_setting <= RT5677_CLK_SEL_I2S6_ASRC)
+ return 1;
+ break;
+
+ case 9:
+ regmap_read(rt5677->regmap, RT5677_ASRC_5, &asrc_setting);
+ asrc_setting = (asrc_setting & RT5677_AD_STO3_CLK_SEL_MASK) >>
+ RT5677_AD_STO3_CLK_SEL_SFT;
+ if (asrc_setting >= RT5677_CLK_SEL_I2S1_ASRC &&
+ asrc_setting <= RT5677_CLK_SEL_I2S6_ASRC)
+ return 1;
+ break;
+
+ case 8:
+ regmap_read(rt5677->regmap, RT5677_ASRC_5, &asrc_setting);
+ asrc_setting = (asrc_setting & RT5677_AD_STO4_CLK_SEL_MASK) >>
+ RT5677_AD_STO4_CLK_SEL_SFT;
+ if (asrc_setting >= RT5677_CLK_SEL_I2S1_ASRC &&
+ asrc_setting <= RT5677_CLK_SEL_I2S6_ASRC)
+ return 1;
+ break;
+
+ case 7:
+ regmap_read(rt5677->regmap, RT5677_ASRC_6, &asrc_setting);
+ asrc_setting = (asrc_setting & RT5677_AD_MONOL_CLK_SEL_MASK) >>
+ RT5677_AD_MONOL_CLK_SEL_SFT;
+ if (asrc_setting >= RT5677_CLK_SEL_I2S1_ASRC &&
+ asrc_setting <= RT5677_CLK_SEL_I2S6_ASRC)
+ return 1;
+ break;
+
+ case 6:
+ regmap_read(rt5677->regmap, RT5677_ASRC_6, &asrc_setting);
+ asrc_setting = (asrc_setting & RT5677_AD_MONOR_CLK_SEL_MASK) >>
+ RT5677_AD_MONOR_CLK_SEL_SFT;
+ if (asrc_setting >= RT5677_CLK_SEL_I2S1_ASRC &&
+ asrc_setting <= RT5677_CLK_SEL_I2S6_ASRC)
+ return 1;
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
/* Digital Mixer */
static const struct snd_kcontrol_new rt5677_sto1_adc_l_mix[] = {
SOC_DAPM_SINGLE("ADC1 Switch", RT5677_STO1_ADC_MIXER,
@@ -3057,12 +3156,12 @@
};
static const struct snd_soc_dapm_route rt5677_dapm_routes[] = {
- { "Stereo1 DMIC Mux", NULL, "DMIC STO1 ASRC", can_use_asrc },
- { "Stereo2 DMIC Mux", NULL, "DMIC STO2 ASRC", can_use_asrc },
- { "Stereo3 DMIC Mux", NULL, "DMIC STO3 ASRC", can_use_asrc },
- { "Stereo4 DMIC Mux", NULL, "DMIC STO4 ASRC", can_use_asrc },
- { "Mono DMIC L Mux", NULL, "DMIC MONO L ASRC", can_use_asrc },
- { "Mono DMIC R Mux", NULL, "DMIC MONO R ASRC", can_use_asrc },
+ { "Stereo1 DMIC Mux", NULL, "DMIC STO1 ASRC", rt5677_dmic_use_asrc },
+ { "Stereo2 DMIC Mux", NULL, "DMIC STO2 ASRC", rt5677_dmic_use_asrc },
+ { "Stereo3 DMIC Mux", NULL, "DMIC STO3 ASRC", rt5677_dmic_use_asrc },
+ { "Stereo4 DMIC Mux", NULL, "DMIC STO4 ASRC", rt5677_dmic_use_asrc },
+ { "Mono DMIC L Mux", NULL, "DMIC MONO L ASRC", rt5677_dmic_use_asrc },
+ { "Mono DMIC R Mux", NULL, "DMIC MONO R ASRC", rt5677_dmic_use_asrc },
{ "I2S1", NULL, "I2S1 ASRC", can_use_asrc},
{ "I2S2", NULL, "I2S2 ASRC", can_use_asrc},
{ "I2S3", NULL, "I2S3 ASRC", can_use_asrc},
@@ -4667,6 +4766,8 @@
regmap_write(rt5677->regmap, RT5677_RESET, 0x10ec);
if (gpio_is_valid(rt5677->pow_ldo2))
gpio_set_value_cansleep(rt5677->pow_ldo2, 0);
+ if (gpio_is_valid(rt5677->reset_pin))
+ gpio_set_value_cansleep(rt5677->reset_pin, 0);
return 0;
}
@@ -4682,6 +4783,8 @@
if (gpio_is_valid(rt5677->pow_ldo2))
gpio_set_value_cansleep(rt5677->pow_ldo2, 0);
+ if (gpio_is_valid(rt5677->reset_pin))
+ gpio_set_value_cansleep(rt5677->reset_pin, 0);
}
return 0;
@@ -4692,10 +4795,13 @@
struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
if (!rt5677->dsp_vad_en) {
- if (gpio_is_valid(rt5677->pow_ldo2)) {
+ if (gpio_is_valid(rt5677->pow_ldo2))
gpio_set_value_cansleep(rt5677->pow_ldo2, 1);
+ if (gpio_is_valid(rt5677->reset_pin))
+ gpio_set_value_cansleep(rt5677->reset_pin, 1);
+ if (gpio_is_valid(rt5677->pow_ldo2) ||
+ gpio_is_valid(rt5677->reset_pin))
msleep(10);
- }
regcache_cache_only(rt5677->regmap, false);
regcache_sync(rt5677->regmap);
@@ -4933,6 +5039,8 @@
rt5677->pow_ldo2 = of_get_named_gpio(np,
"realtek,pow-ldo2-gpio", 0);
+ rt5677->reset_pin = of_get_named_gpio(np,
+ "realtek,reset-gpio", 0);
/*
* POW_LDO2 is optional (it may be statically tied on the board).
@@ -4943,6 +5051,9 @@
if (!gpio_is_valid(rt5677->pow_ldo2) &&
(rt5677->pow_ldo2 != -ENOENT))
return rt5677->pow_ldo2;
+ if (!gpio_is_valid(rt5677->reset_pin) &&
+ (rt5677->reset_pin != -ENOENT))
+ return rt5677->reset_pin;
of_property_read_u8_array(np, "realtek,gpio-config",
rt5677->pdata.gpio_config, RT5677_GPIO_NUM);
@@ -5044,6 +5155,7 @@
}
} else {
rt5677->pow_ldo2 = -EINVAL;
+ rt5677->reset_pin = -EINVAL;
}
if (gpio_is_valid(rt5677->pow_ldo2)) {
@@ -5055,6 +5167,21 @@
rt5677->pow_ldo2, ret);
return ret;
}
+ }
+
+ if (gpio_is_valid(rt5677->reset_pin)) {
+ ret = devm_gpio_request_one(&i2c->dev, rt5677->reset_pin,
+ GPIOF_OUT_INIT_HIGH,
+ "RT5677 RESET");
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to request RESET %d: %d\n",
+ rt5677->reset_pin, ret);
+ return ret;
+ }
+ }
+
+ if (gpio_is_valid(rt5677->pow_ldo2) ||
+ gpio_is_valid(rt5677->reset_pin)) {
/* Wait a while until I2C bus becomes available. The datasheet
* does not specify the exact we should wait but startup
* sequence mentiones at least a few milliseconds.
diff --git a/sound/soc/codecs/rt5677.h b/sound/soc/codecs/rt5677.h
index 9dceb41..7eca38a 100644
--- a/sound/soc/codecs/rt5677.h
+++ b/sound/soc/codecs/rt5677.h
@@ -1446,6 +1446,16 @@
#define RT5677_DSP_OB_4_7_CLK_SEL_MASK (0xf << 8)
#define RT5677_DSP_OB_4_7_CLK_SEL_SFT 8
+/* ASRC Control 8 (0x8a) */
+#define RT5677_I2S1_CLK_SEL_MASK (0xf << 12)
+#define RT5677_I2S1_CLK_SEL_SFT 12
+#define RT5677_I2S2_CLK_SEL_MASK (0xf << 8)
+#define RT5677_I2S2_CLK_SEL_SFT 8
+#define RT5677_I2S3_CLK_SEL_MASK (0xf << 4)
+#define RT5677_I2S3_CLK_SEL_SFT 4
+#define RT5677_I2S4_CLK_SEL_MASK (0xf)
+#define RT5677_I2S4_CLK_SEL_SFT 0
+
/* VAD Function Control 4 (0x9f) */
#define RT5677_VAD_SRC_MASK (0x7 << 8)
#define RT5677_VAD_SRC_SFT 8
@@ -1744,6 +1754,10 @@
RT5677_AD_MONO_R_FILTER = (0x1 << 12),
RT5677_DSP_OB_0_3_FILTER = (0x1 << 13),
RT5677_DSP_OB_4_7_FILTER = (0x1 << 14),
+ RT5677_I2S1_SOURCE = (0x1 << 15),
+ RT5677_I2S2_SOURCE = (0x1 << 16),
+ RT5677_I2S3_SOURCE = (0x1 << 17),
+ RT5677_I2S4_SOURCE = (0x1 << 18),
};
struct rt5677_priv {
@@ -1762,6 +1776,7 @@
int pll_in;
int pll_out;
int pow_ldo2; /* POW_LDO2 pin */
+ int reset_pin; /* RESET pin */
enum rt5677_type type;
#ifdef CONFIG_GPIOLIB
struct gpio_chip gpio_chip;
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 661ed4d..e673f6c 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1091,6 +1091,19 @@
}
/*
+ * This precalculated table contains all (vag_val * 100 / lo_calcntrl) results
+ * to select an appropriate lo_vol_* in SGTL5000_CHIP_LINE_OUT_VOL
+ * The calculatation was done for all possible register values which
+ * is the array index and the following formula: 10^((idx−15)/40) * 100
+ */
+static const u8 vol_quot_table[] = {
+ 42, 45, 47, 50, 53, 56, 60, 63,
+ 67, 71, 75, 79, 84, 89, 94, 100,
+ 106, 112, 119, 126, 133, 141, 150, 158,
+ 168, 178, 188, 200, 211, 224, 237, 251
+};
+
+/*
* sgtl5000 has 3 internal power supplies:
* 1. VAG, normally set to vdda/2
* 2. charge pump, set to different value
@@ -1110,6 +1123,10 @@
u16 ana_pwr;
u16 lreg_ctrl;
int vag;
+ int lo_vag;
+ int vol_quot;
+ int lo_vol;
+ size_t i;
struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
vdda = regulator_get_voltage(sgtl5000->supplies[VDDA].consumer);
@@ -1197,23 +1214,45 @@
SGTL5000_ANA_GND_MASK, vag << SGTL5000_ANA_GND_SHIFT);
/* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */
- vag = vddio / 2;
- if (vag <= SGTL5000_LINE_OUT_GND_BASE)
- vag = 0;
- else if (vag >= SGTL5000_LINE_OUT_GND_BASE +
+ lo_vag = vddio / 2;
+ if (lo_vag <= SGTL5000_LINE_OUT_GND_BASE)
+ lo_vag = 0;
+ else if (lo_vag >= SGTL5000_LINE_OUT_GND_BASE +
SGTL5000_LINE_OUT_GND_STP * SGTL5000_LINE_OUT_GND_MAX)
- vag = SGTL5000_LINE_OUT_GND_MAX;
+ lo_vag = SGTL5000_LINE_OUT_GND_MAX;
else
- vag = (vag - SGTL5000_LINE_OUT_GND_BASE) /
+ lo_vag = (lo_vag - SGTL5000_LINE_OUT_GND_BASE) /
SGTL5000_LINE_OUT_GND_STP;
snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
SGTL5000_LINE_OUT_CURRENT_MASK |
SGTL5000_LINE_OUT_GND_MASK,
- vag << SGTL5000_LINE_OUT_GND_SHIFT |
+ lo_vag << SGTL5000_LINE_OUT_GND_SHIFT |
SGTL5000_LINE_OUT_CURRENT_360u <<
SGTL5000_LINE_OUT_CURRENT_SHIFT);
+ /*
+ * Set lineout output level in range (0..31)
+ * the same value is used for right and left channel
+ *
+ * Searching for a suitable index solving this formula:
+ * idx = 40 * log10(vag_val / lo_cagcntrl) + 15
+ */
+ vol_quot = (vag * 100) / lo_vag;
+ lo_vol = 0;
+ for (i = 0; i < ARRAY_SIZE(vol_quot_table); i++) {
+ if (vol_quot >= vol_quot_table[i])
+ lo_vol = i;
+ else
+ break;
+ }
+
+ snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_VOL,
+ SGTL5000_LINE_OUT_VOL_RIGHT_MASK |
+ SGTL5000_LINE_OUT_VOL_LEFT_MASK,
+ lo_vol << SGTL5000_LINE_OUT_VOL_RIGHT_SHIFT |
+ lo_vol << SGTL5000_LINE_OUT_VOL_LEFT_SHIFT);
+
return 0;
}
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 0632a36..3744c9e 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -174,7 +174,8 @@
config SND_SOC_SPEYSIDE
tristate "Audio support for Wolfson Speyside"
- depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && I2C && SPI_MASTER
+ depends on SND_SOC_SAMSUNG && I2C && SPI_MASTER
+ depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
select SND_SAMSUNG_I2S
select SND_SOC_WM8996
select SND_SOC_WM9081
@@ -183,13 +184,15 @@
config SND_SOC_TOBERMORY
tristate "Audio support for Wolfson Tobermory"
- depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && INPUT && I2C
+ depends on SND_SOC_SAMSUNG && INPUT && I2C
+ depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
select SND_SAMSUNG_I2S
select SND_SOC_WM8962
config SND_SOC_BELLS
tristate "Audio support for Wolfson Bells"
- depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && MFD_ARIZONA && I2C && SPI_MASTER
+ depends on SND_SOC_SAMSUNG && MFD_ARIZONA && I2C && SPI_MASTER
+ depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
select SND_SAMSUNG_I2S
select SND_SOC_WM5102
select SND_SOC_WM5110
@@ -199,14 +202,16 @@
config SND_SOC_LOWLAND
tristate "Audio support for Wolfson Lowland"
- depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && I2C
+ depends on SND_SOC_SAMSUNG && I2C
+ depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
select SND_SAMSUNG_I2S
select SND_SOC_WM5100
select SND_SOC_WM9081
config SND_SOC_LITTLEMILL
tristate "Audio support for Wolfson Littlemill"
- depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && I2C
+ depends on SND_SOC_SAMSUNG && I2C
+ depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
select SND_SAMSUNG_I2S
select MFD_WM8994
select SND_SOC_WM8994
diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
index b92ab40..ea4ab37 100644
--- a/sound/soc/samsung/i2s.c
+++ b/sound/soc/samsung/i2s.c
@@ -1493,7 +1493,7 @@
.dai_type = TYPE_SEC,
};
-static struct platform_device_id samsung_i2s_driver_ids[] = {
+static const struct platform_device_id samsung_i2s_driver_ids[] = {
{
.name = "samsung-i2s",
.driver_data = (kernel_ulong_t)&i2sv3_dai_type,
diff --git a/sound/soc/samsung/lowland.c b/sound/soc/samsung/lowland.c
index 5f15609..0d0f582 100644
--- a/sound/soc/samsung/lowland.c
+++ b/sound/soc/samsung/lowland.c
@@ -72,7 +72,7 @@
{
struct snd_soc_codec *codec = rtd->codec;
- snd_soc_dapm_nc_pin(&codec->dapm, "LINEOUT");
+ snd_soc_dapm_nc_pin(&rtd->card->dapm, "LINEOUT");
/* At any time the WM9081 is active it will have this clock */
return snd_soc_codec_set_sysclk(codec, WM9081_SYSCLK_MCLK, 0,
diff --git a/sound/soc/samsung/smartq_wm8987.c b/sound/soc/samsung/smartq_wm8987.c
index dfbe2db..a0fe37f 100644
--- a/sound/soc/samsung/smartq_wm8987.c
+++ b/sound/soc/samsung/smartq_wm8987.c
@@ -137,8 +137,7 @@
static int smartq_wm8987_init(struct snd_soc_pcm_runtime *rtd)
{
- struct snd_soc_codec *codec = rtd->codec;
- struct snd_soc_dapm_context *dapm = &codec->dapm;
+ struct snd_soc_dapm_context *dapm = &rtd->card->dapm;
int err = 0;
/* set endpoints to not connected */
@@ -147,9 +146,6 @@
snd_soc_dapm_nc_pin(dapm, "OUT3");
snd_soc_dapm_nc_pin(dapm, "ROUT1");
- /* set endpoints to default off mode */
- snd_soc_dapm_disable_pin(dapm, "Headphone Jack");
-
/* Headphone jack detection */
err = snd_soc_card_jack_new(rtd->card, "Headphone Jack",
SND_JACK_HEADPHONE, &smartq_jack,
diff --git a/sound/soc/samsung/smdk_wm8994.c b/sound/soc/samsung/smdk_wm8994.c
index d38595fb..ff57b19 100644
--- a/sound/soc/samsung/smdk_wm8994.c
+++ b/sound/soc/samsung/smdk_wm8994.c
@@ -86,8 +86,7 @@
static int smdk_wm8994_init_paiftx(struct snd_soc_pcm_runtime *rtd)
{
- struct snd_soc_codec *codec = rtd->codec;
- struct snd_soc_dapm_context *dapm = &codec->dapm;
+ struct snd_soc_dapm_context *dapm = &rtd->card->dapm;
/* Other pins NC */
snd_soc_dapm_nc_pin(dapm, "HPOUT2P");
diff --git a/sound/soc/samsung/speyside.c b/sound/soc/samsung/speyside.c
index 2dcb988..d1ae21c5 100644
--- a/sound/soc/samsung/speyside.c
+++ b/sound/soc/samsung/speyside.c
@@ -123,7 +123,7 @@
gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity);
/* Re-run DAPM to make sure we're using the correct mic bias */
- snd_soc_dapm_sync(&codec->dapm);
+ snd_soc_dapm_sync(snd_soc_codec_get_dapm(codec));
}
static int speyside_wm0010_init(struct snd_soc_pcm_runtime *rtd)