[PATCH] schedule obsolete OSS drivers for removal
This patch schedules obsolete OSS drivers (with ALSA drivers that support
the same hardware) for removal.
Scheduling the via82cxxx driver for removal was ACK'ed by Jeff Garzik.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 953e5f3..88e52dc 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -4,9 +4,24 @@
# More hacking for modularisation.
#
# Prompt user for primary drivers.
+
+config OBSOLETE_OSS_DRIVER
+ bool "Obsolete OSS drivers"
+ depends on SOUND_PRIME
+ help
+ This option enables support for obsolete OSS drivers that
+ are scheduled for removal in the near future since there
+ are ALSA drivers for the same hardware.
+
+ Please contact Adrian Bunk <bunk@stusta.de> if you had to
+ say Y here because your soundcard is not properly supported
+ by ALSA.
+
+ If unsure, say N.
+
config SOUND_BT878
tristate "BT878 audio dma"
- depends on SOUND_PRIME && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
---help---
Audio DMA support for bt878 based grabber boards. As you might have
already noticed, bt878 is listed with two functions in /proc/pci.
@@ -22,7 +37,7 @@
config SOUND_CMPCI
tristate "C-Media PCI (CMI8338/8738)"
- depends on SOUND_PRIME && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a PCI sound card using the CMI8338
or the CMI8738 chipset. Data on these chips are available at
@@ -61,7 +76,7 @@
config SOUND_EMU10K1
tristate "Creative SBLive! (EMU10K1)"
- depends on SOUND_PRIME && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
---help---
Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
such as the Creative SBLive!, SB PCI512 or Emu-APS.
@@ -95,7 +110,7 @@
config SOUND_CS4281
tristate "Crystal Sound CS4281"
- depends on SOUND_PRIME && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Picture and feature list at
<http://www.pcbroker.com/crystal4281.html>.
@@ -112,7 +127,7 @@
config SOUND_ES1370
tristate "Ensoniq AudioPCI (ES1370)"
- depends on SOUND_PRIME && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a PCI sound card utilizing the Ensoniq
ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
@@ -125,7 +140,7 @@
config SOUND_ES1371
tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
- depends on SOUND_PRIME && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a PCI sound card utilizing the Ensoniq
ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
@@ -138,7 +153,7 @@
config SOUND_ESSSOLO1
tristate "ESS Technology Solo1"
- depends on SOUND_PRIME && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a PCI sound card utilizing the ESS Technology
Solo1 chip. To find out if your sound card uses a
@@ -149,7 +164,7 @@
config SOUND_MAESTRO
tristate "ESS Maestro, Maestro2, Maestro2E driver"
- depends on SOUND_PRIME && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a sound system driven by ESS's Maestro line
of PCI sound chips. These include the Maestro 1, Maestro 2, and
@@ -158,7 +173,7 @@
config SOUND_MAESTRO3
tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)"
- depends on SOUND_PRIME && PCI && EXPERIMENTAL
+ depends on SOUND_PRIME && PCI && EXPERIMENTAL && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a sound system driven by ESS's Maestro 3
PCI sound chip.
@@ -172,14 +187,14 @@
config SOUND_HARMONY
tristate "PA Harmony audio driver"
- depends on GSC_LASI && SOUND_PRIME
+ depends on GSC_LASI && SOUND_PRIME && OBSOLETE_OSS_DRIVER
help
Say 'Y' or 'M' to include support for Harmony soundchip
on HP 712, 715/new and many other GSC based machines.
config SOUND_SONICVIBES
tristate "S3 SonicVibes"
- depends on SOUND_PRIME && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a PCI sound card utilizing the S3
SonicVibes chipset. To find out if your sound card uses a
@@ -218,7 +233,7 @@
config SOUND_AU1000
tristate "Au1000 Sound"
- depends on SOUND_PRIME && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500)
+ depends on SOUND_PRIME && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && OBSOLETE_OSS_DRIVER
config SOUND_AU1550_AC97
tristate "Au1550 AC97 Sound"
@@ -492,7 +507,7 @@
config SOUND_VIA82CXXX
tristate "VIA 82C686 Audio Codec"
- depends on SOUND_PRIME && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y here to include support for the audio codec found on VIA
82Cxxx-based chips. Typically these are built into a motherboard.
@@ -563,7 +578,7 @@
config SOUND_SGALAXY
tristate "Aztech Sound Galaxy (non-PnP) cards"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
This module initializes the older non Plug and Play sound galaxy
cards from Aztech. It supports the Waverider Pro 32 - 3D and the
@@ -599,7 +614,7 @@
config SOUND_CS4232
tristate "Crystal CS4232 based (PnP) cards"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Say Y here if you have a card based on the Crystal CS4232 chip set,
which uses its own Plug and Play protocol.
@@ -613,7 +628,7 @@
config SOUND_SSCAPE
tristate "Ensoniq SoundScape support"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Answer Y if you have a sound card based on the Ensoniq SoundScape
chipset. Such cards are being manufactured at least by Ensoniq, Spea
@@ -625,7 +640,7 @@
config SOUND_GUS
tristate "Gravis Ultrasound support"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Say Y here for any type of Gravis Ultrasound card, including the GUS
or GUS MAX. See also <file:Documentation/sound/oss/ultrasound> for more
@@ -727,7 +742,7 @@
config SOUND_NM256
tristate "NM256AV/NM256ZX audio support"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Say M here to include audio support for the NeoMagic 256AV/256ZX
chipsets. These are the audio chipsets found in the Sony
@@ -739,7 +754,7 @@
config SOUND_MAD16
tristate "OPTi MAD16 and/or Mozart based cards"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
---help---
Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi
82C928 or 82C929 or 82C931) audio interface chip. These chips are
@@ -860,7 +875,7 @@
config SOUND_AWE32_SYNTH
tristate "AWE32 synth"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or
similar sound card. See <file:Documentation/sound/oss/README.awe>,
@@ -870,7 +885,7 @@
config SOUND_WAVEFRONT
tristate "Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards"
- depends on SOUND_OSS && m
+ depends on SOUND_OSS && m && OBSOLETE_OSS_DRIVER
help
Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card
and read the files <file:Documentation/sound/oss/Wavefront> and
@@ -878,7 +893,7 @@
config SOUND_MAUI
tristate "Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Say Y here if you have a Turtle Beach Wave Front, Maui, or Tropez
sound card.
@@ -904,7 +919,7 @@
config SOUND_YM3812
tristate "Yamaha FM synthesizer (YM3812/OPL-3) support"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
---help---
Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
Answering Y is usually a safe and recommended choice, however some
@@ -920,7 +935,7 @@
config SOUND_OPL3SA1
tristate "Yamaha OPL3-SA1 audio controller"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is
usually built into motherboards. Read
@@ -946,7 +961,7 @@
config SOUND_YMFPCI
tristate "Yamaha YMF7xx PCI audio (native mode)"
- depends on SOUND_OSS && PCI
+ depends on SOUND_OSS && PCI && OBSOLETE_OSS_DRIVER
help
Support for Yamaha cards including the YMF711, YMF715, YMF718,
YMF719, YMF724, Waveforce 192XG, and Waveforce 192 Digital.
@@ -1088,11 +1103,11 @@
config SOUND_ALI5455
tristate "ALi5455 audio support"
- depends on SOUND_PRIME && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
config SOUND_FORTE
tristate "ForteMedia FM801 driver"
- depends on SOUND_PRIME && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you want driver support for the ForteMedia FM801 PCI
audio controller (Abit AU10, Genius Sound Maker, HP Workstation
@@ -1100,7 +1115,7 @@
config SOUND_RME96XX
tristate "RME Hammerfall (RME96XX) support"
- depends on SOUND_PRIME && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a Hammerfall or Hammerfall light
multichannel card from RME. If you want to access advanced
@@ -1108,7 +1123,7 @@
config SOUND_AD1980
tristate "AD1980 front/back switch plugin"
- depends on SOUND_PRIME
+ depends on SOUND_PRIME && OBSOLETE_OSS_DRIVER
config SOUND_SH_DAC_AUDIO
tristate "SuperH DAC audio support"