dt-bindings: net: add DT bindings for Microsemi MIIM
DT bindings for the Microsemi MII Management Controller found on Microsemi
SoCs
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/Documentation/devicetree/bindings/net/mscc-miim.txt b/Documentation/devicetree/bindings/net/mscc-miim.txt
new file mode 100644
index 0000000..7104679
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mscc-miim.txt
@@ -0,0 +1,26 @@
+Microsemi MII Management Controller (MIIM) / MDIO
+=================================================
+
+Properties:
+- compatible: must be "mscc,ocelot-miim"
+- reg: The base address of the MDIO bus controller register bank. Optionally, a
+ second register bank can be defined if there is an associated reset register
+ for internal PHYs
+- #address-cells: Must be <1>.
+- #size-cells: Must be <0>. MDIO addresses have no size component.
+- interrupts: interrupt specifier (refer to the interrupt binding)
+
+Typically an MDIO bus might have several children.
+
+Example:
+ mdio@107009c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mscc,ocelot-miim";
+ reg = <0x107009c 0x36>, <0x10700f0 0x8>;
+ interrupts = <14>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };