ASoC: bytcr_rt5640: log quirk configuration errors
Now that quirks can be overridden with a module parameter,
log errors so that non-sensical quirks introduced by mistake
are identified.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 5ca09ca..f063368 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -57,6 +57,7 @@ enum {
struct byt_rt5640_private {
struct clk *mclk;
};
+static bool is_bytcr;
static unsigned long byt_rt5640_quirk = BYT_RT5640_MCLK_EN;
static unsigned int quirk_override;
@@ -65,30 +66,79 @@ MODULE_PARM_DESC(quirk, "Board-specific quirk override");
static void log_quirks(struct device *dev)
{
- if (BYT_RT5640_MAP(byt_rt5640_quirk) == BYT_RT5640_DMIC1_MAP)
- dev_info(dev, "quirk DMIC1_MAP enabled");
- if (BYT_RT5640_MAP(byt_rt5640_quirk) == BYT_RT5640_DMIC2_MAP)
- dev_info(dev, "quirk DMIC2_MAP enabled");
- if (BYT_RT5640_MAP(byt_rt5640_quirk) == BYT_RT5640_IN1_MAP)
- dev_info(dev, "quirk IN1_MAP enabled");
- if (BYT_RT5640_MAP(byt_rt5640_quirk) == BYT_RT5640_IN3_MAP)
- dev_info(dev, "quirk IN3_MAP enabled");
- if (byt_rt5640_quirk & BYT_RT5640_DMIC_EN)
- dev_info(dev, "quirk DMIC enabled");
+ int map;
+ bool has_dmic = false;
+ bool has_mclk = false;
+ bool has_ssp0 = false;
+ bool has_ssp0_aif1 = false;
+ bool has_ssp0_aif2 = false;
+ bool has_ssp2_aif2 = false;
+
+ map = BYT_RT5640_MAP(byt_rt5640_quirk);
+ switch (map) {
+ case BYT_RT5640_DMIC1_MAP:
+ dev_info(dev, "quirk DMIC1_MAP enabled\n");
+ has_dmic = true;
+ break;
+ case BYT_RT5640_DMIC2_MAP:
+ dev_info(dev, "quirk DMIC2_MAP enabled\n");
+ has_dmic = true;
+ break;
+ case BYT_RT5640_IN1_MAP:
+ dev_info(dev, "quirk IN1_MAP enabled\n");
+ break;
+ case BYT_RT5640_IN3_MAP:
+ dev_info(dev, "quirk IN3_MAP enabled\n");
+ break;
+ default:
+ dev_err(dev, "quirk map 0x%x is not supported, microphone input will not work\n", map);
+ break;
+ }
+ if (byt_rt5640_quirk & BYT_RT5640_DMIC_EN) {
+ if (has_dmic)
+ dev_info(dev, "quirk DMIC enabled\n");
+ else
+ dev_err(dev, "quirk DMIC enabled but no DMIC input set, will be ignored\n");
+ }
if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER)
- dev_info(dev, "quirk MONO_SPEAKER enabled");
- if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC)
- dev_info(dev, "quirk DIFF_MIC enabled");
- if (byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2)
- dev_info(dev, "quirk SSP2_AIF2 enabled");
- if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1)
- dev_info(dev, "quirk SSP0_AIF1 enabled");
- if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2)
- dev_info(dev, "quirk SSP0_AIF2 enabled");
- if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN)
- dev_info(dev, "quirk MCLK_EN enabled");
- if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ)
- dev_info(dev, "quirk MCLK_25MHZ enabled");
+ dev_info(dev, "quirk MONO_SPEAKER enabled\n");
+ if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC) {
+ if (!has_dmic)
+ dev_info(dev, "quirk DIFF_MIC enabled\n");
+ else
+ dev_info(dev, "quirk DIFF_MIC enabled but DMIC input selected, will be ignored\n");
+ }
+ if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) {
+ dev_info(dev, "quirk SSP0_AIF1 enabled\n");
+ has_ssp0 = true;
+ has_ssp0_aif1 = true;
+ }
+ if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2) {
+ dev_info(dev, "quirk SSP0_AIF2 enabled\n");
+ has_ssp0 = true;
+ has_ssp0_aif2 = true;
+ }
+ if (byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2) {
+ dev_info(dev, "quirk SSP2_AIF2 enabled\n");
+ has_ssp2_aif2 = true;
+ }
+ if (is_bytcr && !has_ssp0)
+ dev_err(dev, "Invalid routing, bytcr detected but no SSP0-based quirk, audio cannot work with SSP2 on bytcr\n");
+ if (has_ssp0_aif1 && has_ssp0_aif2)
+ dev_err(dev, "Invalid routing, SSP0 cannot be connected to both AIF1 and AIF2\n");
+ if (has_ssp0 && has_ssp2_aif2)
+ dev_err(dev, "Invalid routing, cannot have both SSP0 and SSP2 connected to codec\n");
+
+ if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) {
+ dev_info(dev, "quirk MCLK_EN enabled\n");
+ has_mclk = true;
+ }
+ if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ) {
+ if (has_mclk)
+ dev_info(dev, "quirk MCLK_25MHZ enabled\n");
+ else
+ dev_err(dev, "quirk MCLK_25MHZ enabled but quirk MCLK not selected, will be ignored\n");
+ }
}
@@ -132,7 +182,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
ret = clk_prepare_enable(priv->mclk);
if (ret < 0) {
dev_err(card->dev,
- "could not configure MCLK state");
+ "could not configure MCLK state\n");
return ret;
}
}
@@ -714,8 +764,8 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
int i;
int dai_index;
struct byt_rt5640_private *priv;
- bool is_bytcr = false;
+ is_bytcr = false;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_ATOMIC);
if (!priv)
return -ENOMEM;