ALSA: atiixp-modem: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/atiixp_modem.c b/sound/pci/atiixp_modem.c
index 2b3244a..b9dc96c 100644
--- a/sound/pci/atiixp_modem.c
+++ b/sound/pci/atiixp_modem.c
@@ -400,7 +400,7 @@
while (atiixp_read(chip, PHYS_OUT_ADDR) & ATI_REG_PHYS_OUT_ADDR_EN) {
if (! timeout--) {
- snd_printk(KERN_WARNING "atiixp-modem: codec acquire timeout\n");
+ dev_warn(chip->card->dev, "codec acquire timeout\n");
return -EBUSY;
}
udelay(1);
@@ -433,7 +433,7 @@
} while (--timeout);
/* time out may happen during reset */
if (reg < 0x7c)
- snd_printk(KERN_WARNING "atiixp-modem: codec read timeout (reg %x)\n", reg);
+ dev_warn(chip->card->dev, "codec read timeout (reg %x)\n", reg);
return 0xffff;
}
@@ -499,7 +499,7 @@
msleep(1);
atiixp_update(chip, CMD, ATI_REG_CMD_AC_RESET, ATI_REG_CMD_AC_RESET);
if (!--timeout) {
- snd_printk(KERN_ERR "atiixp-modem: codec reset timeout\n");
+ dev_err(chip->card->dev, "codec reset timeout\n");
break;
}
}
@@ -553,7 +553,7 @@
atiixp_write(chip, IER, 0); /* disable irqs */
if ((chip->codec_not_ready_bits & ALL_CODEC_NOT_READY) == ALL_CODEC_NOT_READY) {
- snd_printk(KERN_ERR "atiixp-modem: no codec detected!\n");
+ dev_err(chip->card->dev, "no codec detected!\n");
return -ENXIO;
}
return 0;
@@ -624,7 +624,7 @@
continue;
return bytes_to_frames(runtime, curptr);
}
- snd_printd("atiixp-modem: invalid DMA pointer read 0x%x (buf=%x)\n",
+ dev_dbg(chip->card->dev, "invalid DMA pointer read 0x%x (buf=%x)\n",
readl(chip->remap_addr + dma->ops->dt_cur), dma->buf_addr);
return 0;
}
@@ -637,7 +637,7 @@
{
if (! dma->substream || ! dma->running)
return;
- snd_printdd("atiixp-modem: XRUN detected (DMA %d)\n", dma->ops->type);
+ dev_dbg(chip->card->dev, "XRUN detected (DMA %d)\n", dma->ops->type);
snd_pcm_stream_lock(dma->substream);
snd_pcm_stop(dma->substream, SNDRV_PCM_STATE_XRUN);
snd_pcm_stream_unlock(dma->substream);
@@ -1098,14 +1098,15 @@
ac97.scaps = AC97_SCAP_SKIP_AUDIO | AC97_SCAP_POWER_SAVE;
if ((err = snd_ac97_mixer(pbus, &ac97, &chip->ac97[i])) < 0) {
chip->ac97[i] = NULL; /* to be sure */
- snd_printdd("atiixp-modem: codec %d not available for modem\n", i);
+ dev_dbg(chip->card->dev,
+ "codec %d not available for modem\n", i);
continue;
}
codec_count++;
}
if (! codec_count) {
- snd_printk(KERN_ERR "atiixp-modem: no codec available\n");
+ dev_err(chip->card->dev, "no codec available\n");
return -ENODEV;
}
@@ -1150,8 +1151,7 @@
pci_set_power_state(pci, PCI_D0);
pci_restore_state(pci);
if (pci_enable_device(pci) < 0) {
- printk(KERN_ERR "atiixp-modem: pci_enable_device failed, "
- "disabling device\n");
+ dev_err(dev, "pci_enable_device failed, disabling device\n");
snd_card_disconnect(card);
return -EIO;
}
@@ -1262,14 +1262,14 @@
chip->addr = pci_resource_start(pci, 0);
chip->remap_addr = pci_ioremap_bar(pci, 0);
if (chip->remap_addr == NULL) {
- snd_printk(KERN_ERR "AC'97 space ioremap problem\n");
+ dev_err(card->dev, "AC'97 space ioremap problem\n");
snd_atiixp_free(chip);
return -EIO;
}
if (request_irq(pci->irq, snd_atiixp_interrupt, IRQF_SHARED,
KBUILD_MODNAME, chip)) {
- snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
+ dev_err(card->dev, "unable to grab IRQ %d\n", pci->irq);
snd_atiixp_free(chip);
return -EBUSY;
}