Merge tag 'for-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"New drivers:
- sbs-charger driver
- max14656_charger_detector
- axp20x_ac_power
New chip/feature support"
- axp20x_usb_power: add AXP223 support
- tps65217: add usb charger support
- qcom_smbb: support otg regulator
- at91-reset: add samx7 support
Dropped drivers:
- intel_mid_battery (platform was dropped)
Fixes:
- at91-poweroff: avoid wearing off LPDDR memory
- replace deprecated extcon API
- lots of cleanup and style fixes
- misc minor functionality fixes"
* tag 'for-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (84 commits)
power: supply: add AC power supply driver for AXP20X and AXP22X PMICs
dt-bindings: power: supply: add AXP20X/AXP22X AC power supply
power: supply: axp20x_usb_power: use IIO channels when available
power: supply: max14656: Export I2C and OF device ID as module aliases
power: supply: bq2415x: check for NULL acpi_id to avoid null pointer dereference
power: supply: bq24190_charger: Adjust formatting
power: supply: bq24190_charger: Handle fault before status on interrupt
power: supply: bq24190_charger: Don't read fault register outside irq_handle_thread()
power: supply: bq24190_charger: Call power_supply_changed() for relevant component
power: supply: bq24190_charger: Install irq_handler_thread() at end of probe()
power: supply: bq24190_charger: Call set_mode_host() on pm_resume()
power: supply: bq24190_charger: Fix irq trigger to IRQF_TRIGGER_FALLING
power: supply: qcom_smbb: add regulator dependency
power: reset: at91-reset: remove leftover platform_device_id
power: reset: at91-reset: add samx7 support
power: supply: max14656: fix platform_no_drv_owner.cocci warnings
power: supply: pcf50633-charger: Compress return logic into one line.
power: supply: ab8500_btemp: Compress return logic into one line.
power: reset: at91-poweroff: timely shutdown LPDDR memories
ARM: at91: define LPDDR types
...
diff --git a/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt b/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt
new file mode 100644
index 0000000..826e8a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt
@@ -0,0 +1,22 @@
+AXP20X and AXP22X PMICs' AC power supply
+
+Required Properties:
+ - compatible: One of:
+ "x-powers,axp202-ac-power-supply"
+ "x-powers,axp221-ac-power-supply"
+
+This node is a subnode of the axp20x PMIC.
+
+The AXP20X can read the current current and voltage supplied by AC by
+reading ADC channels from the AXP20X ADC.
+
+The AXP22X is only able to tell if an AC power supply is present and
+usable.
+
+Example:
+
+&axp209 {
+ ac_power_supply: ac-power-supply {
+ compatible = "x-powers,axp202-ac-power-supply";
+ };
+};
diff --git a/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt b/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt
index f1d7bee..ba8d35f 100644
--- a/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt
+++ b/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt
@@ -3,6 +3,11 @@
Required Properties:
-compatible: One of: "x-powers,axp202-usb-power-supply"
"x-powers,axp221-usb-power-supply"
+ "x-powers,axp223-usb-power-supply"
+
+The AXP223 PMIC shares most of its behaviour with the AXP221 but has slight
+variations such as the former being able to set the VBUS power supply max
+current to 100mA, unlike the latter.
This node is a subnode of the axp20x PMIC.
diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.txt b/Documentation/devicetree/bindings/power/supply/bq27xxx.txt
new file mode 100644
index 0000000..b0c95ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.txt
@@ -0,0 +1,36 @@
+Binding for TI BQ27XXX fuel gauge family
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "ti,bq27200" - BQ27200
+ * "ti,bq27210" - BQ27210
+ * "ti,bq27500" - deprecated, use revision specific property below
+ * "ti,bq27510" - deprecated, use revision specific property below
+ * "ti,bq27520" - deprecated, use revision specific property below
+ * "ti,bq27500-1" - BQ27500/1
+ * "ti,bq27510g1" - BQ27510-g1
+ * "ti,bq27510g2" - BQ27510-g2
+ * "ti,bq27510g3" - BQ27510-g3
+ * "ti,bq27520g1" - BQ27520-g1
+ * "ti,bq27520g2" - BQ27520-g2
+ * "ti,bq27520g3" - BQ27520-g3
+ * "ti,bq27520g4" - BQ27520-g4
+ * "ti,bq27530" - BQ27530
+ * "ti,bq27531" - BQ27531
+ * "ti,bq27541" - BQ27541
+ * "ti,bq27542" - BQ27542
+ * "ti,bq27546" - BQ27546
+ * "ti,bq27742" - BQ27742
+ * "ti,bq27545" - BQ27545
+ * "ti,bq27421" - BQ27421
+ * "ti,bq27425" - BQ27425
+ * "ti,bq27441" - BQ27441
+ * "ti,bq27621" - BQ27621
+- reg: integer, i2c address of the device.
+
+Example:
+
+bq27510g3 {
+ compatible = "ti,bq27510g3";
+ reg = <0x55>;
+};
diff --git a/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt b/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt
index 65b88fa..06f8a5d 100644
--- a/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt
+++ b/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt
@@ -105,6 +105,22 @@
regulation must be done externally to fully comply with
the JEITA safety guidelines if this flag is set.
+- usb_otg_in-supply:
+ Usage: optional
+ Value type: <phandle>
+ Description: Reference to the regulator supplying power to the USB_OTG_IN
+ pin.
+
+child nodes:
+- otg-vbus:
+ Usage: optional
+ Description: This node defines a regulator used to control the direction
+ of VBUS voltage - specifically: whether to supply voltage
+ to VBUS for host mode operation of the OTG port, or allow
+ input voltage from external VBUS for charging. In the
+ hardware, the supply for this regulator comes from
+ usb_otg_in-supply.
+
EXAMPLE
charger@1000 {
compatible = "qcom,pm8941-charger";
@@ -128,4 +144,7 @@
qcom,fast-charge-current-limit = <1000000>;
qcom,dc-charge-current-limit = <1000000>;
+ usb_otg_in-supply = <&pm8941_5vs1>;
+
+ otg-vbus {};
};
diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
new file mode 100644
index 0000000..a371962
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
@@ -0,0 +1,23 @@
+SBS sbs-charger
+~~~~~~~~~~
+
+Required properties:
+ - compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part
+ number compatible string might be used in order to take care of vendor
+ specific registers.
+
+Optional properties:
+- interrupt-parent: Should be the phandle for the interrupt controller. Use in
+ conjunction with "interrupts".
+- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with
+ "interrupt-parent". If an interrupt is not provided the driver will switch
+ automatically to polling.
+
+Example:
+
+ ltc4100@9 {
+ compatible = "lltc,ltc4100", "sbs,sbs-charger";
+ reg = <0x9>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt b/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt
index 3bf5575..de45e1a 100644
--- a/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt
+++ b/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt
@@ -8,8 +8,10 @@
- interrupts : Specify the interrupt to be used to trigger when the AC
adapter is either plugged in or removed.
- ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
- presence. This is a Host GPIO that is configured as an input and
- connected to the bq24735.
+ status. This is a Host GPIO that is configured as an input and connected
+ to the ACOK pin on the bq24735. Note: for backwards compatibility reasons,
+ the GPIO must be active on AC adapter absence despite ACOK being active
+ (high) on AC adapter presence.
- ti,charge-current : Used to control and set the charging current. This value
must be between 128mA and 8.128A with a 64mA step resolution. The POR value
is 0x0000h. This number is in mA (e.g. 8192), see spec for more information
@@ -25,6 +27,8 @@
- ti,external-control : Indicates that the charger is configured externally
and that the host should not attempt to enable/disable charging or set the
charge voltage/current.
+ - poll-interval : In case 'interrupts' is not specified, poll AC adapter
+ presence with this interval (milliseconds).
Example:
diff --git a/Documentation/devicetree/bindings/power_supply/maxim,max14656.txt b/Documentation/devicetree/bindings/power_supply/maxim,max14656.txt
new file mode 100644
index 0000000..e03e85a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/maxim,max14656.txt
@@ -0,0 +1,25 @@
+Maxim MAX14656 / AL32 USB Charger Detector
+
+Required properties :
+- compatible : "maxim,max14656";
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: interrupt line
+
+Example:
+
+&i2c2 {
+ clock-frequency = <50000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ max14656@35 {
+ compatible = "maxim,max14656";
+ reg = <0x35>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_charger_detect>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index abeb772..b8caccc 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -32,7 +32,7 @@
config POWER_RESET_AT91_SAMA5D2_SHDWC
tristate "Atmel AT91 SAMA5D2-Compatible shutdown controller driver"
- depends on ARCH_AT91 || COMPILE_TEST
+ depends on ARCH_AT91
default SOC_SAMA5
help
This driver supports the alternate shutdown controller for some Atmel
diff --git a/drivers/power/reset/at91-poweroff.c b/drivers/power/reset/at91-poweroff.c
index a85dd4d2..c6c3bee 100644
--- a/drivers/power/reset/at91-poweroff.c
+++ b/drivers/power/reset/at91-poweroff.c
@@ -14,9 +14,12 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/printk.h>
+#include <soc/at91/at91sam9_ddrsdr.h>
+
#define AT91_SHDW_CR 0x00 /* Shut Down Control Register */
#define AT91_SHDW_SHDW BIT(0) /* Shut Down command */
#define AT91_SHDW_KEY (0xa5 << 24) /* KEY Password */
@@ -50,6 +53,7 @@ static const char *shdwc_wakeup_modes[] = {
static void __iomem *at91_shdwc_base;
static struct clk *sclk;
+static void __iomem *mpddrc_base;
static void __init at91_wakeup_status(void)
{
@@ -73,6 +77,29 @@ static void at91_poweroff(void)
writel(AT91_SHDW_KEY | AT91_SHDW_SHDW, at91_shdwc_base + AT91_SHDW_CR);
}
+static void at91_lpddr_poweroff(void)
+{
+ asm volatile(
+ /* Align to cache lines */
+ ".balign 32\n\t"
+
+ /* Ensure AT91_SHDW_CR is in the TLB by reading it */
+ " ldr r6, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t"
+
+ /* Power down SDRAM0 */
+ " str %1, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t"
+ /* Shutdown CPU */
+ " str %3, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t"
+
+ " b .\n\t"
+ :
+ : "r" (mpddrc_base),
+ "r" cpu_to_le32(AT91_DDRSDRC_LPDDR2_PWOFF),
+ "r" (at91_shdwc_base),
+ "r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW)
+ : "r0");
+}
+
static int at91_poweroff_get_wakeup_mode(struct device_node *np)
{
const char *pm;
@@ -124,6 +151,8 @@ static void at91_poweroff_dt_set_wakeup_mode(struct platform_device *pdev)
static int __init at91_poweroff_probe(struct platform_device *pdev)
{
struct resource *res;
+ struct device_node *np;
+ u32 ddr_type;
int ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -150,12 +179,30 @@ static int __init at91_poweroff_probe(struct platform_device *pdev)
pm_power_off = at91_poweroff;
+ np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
+ if (!np)
+ return 0;
+
+ mpddrc_base = of_iomap(np, 0);
+ of_node_put(np);
+
+ if (!mpddrc_base)
+ return 0;
+
+ ddr_type = readl(mpddrc_base + AT91_DDRSDRC_MDR) & AT91_DDRSDRC_MD;
+ if ((ddr_type == AT91_DDRSDRC_MD_LPDDR2) ||
+ (ddr_type == AT91_DDRSDRC_MD_LPDDR3))
+ pm_power_off = at91_lpddr_poweroff;
+ else
+ iounmap(mpddrc_base);
+
return 0;
}
static int __exit at91_poweroff_remove(struct platform_device *pdev)
{
- if (pm_power_off == at91_poweroff)
+ if (pm_power_off == at91_poweroff ||
+ pm_power_off == at91_lpddr_poweroff)
pm_power_off = NULL;
clk_disable_unprepare(sclk);
@@ -163,6 +210,11 @@ static int __exit at91_poweroff_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id at91_ramc_of_match[] = {
+ { .compatible = "atmel,sama5d3-ddramc", },
+ { /* sentinel */ }
+};
+
static const struct of_device_id at91_poweroff_of_match[] = {
{ .compatible = "atmel,at91sam9260-shdwc", },
{ .compatible = "atmel,at91sam9rl-shdwc", },
diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c
index 568580c..b99769f 100644
--- a/drivers/power/reset/at91-reset.c
+++ b/drivers/power/reset/at91-reset.c
@@ -134,6 +134,15 @@ static int sama5d3_restart(struct notifier_block *this, unsigned long mode,
return NOTIFY_DONE;
}
+static int samx7_restart(struct notifier_block *this, unsigned long mode,
+ void *cmd)
+{
+ writel(cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PROCRST),
+ at91_rstc_base);
+
+ return NOTIFY_DONE;
+}
+
static void __init at91_reset_status(struct platform_device *pdev)
{
u32 reg = readl(at91_rstc_base + AT91_RSTC_SR);
@@ -173,6 +182,7 @@ static const struct of_device_id at91_reset_of_match[] = {
{ .compatible = "atmel,at91sam9260-rstc", .data = at91sam9260_restart },
{ .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
{ .compatible = "atmel,sama5d3-rstc", .data = sama5d3_restart },
+ { .compatible = "atmel,samx7-rstc", .data = samx7_restart },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, at91_reset_of_match);
@@ -238,20 +248,12 @@ static int __exit at91_reset_remove(struct platform_device *pdev)
return 0;
}
-static const struct platform_device_id at91_reset_plat_match[] = {
- { "at91-sam9260-reset", (unsigned long)at91sam9260_restart },
- { "at91-sam9g45-reset", (unsigned long)at91sam9g45_restart },
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(platform, at91_reset_plat_match);
-
static struct platform_driver at91_reset_driver = {
.remove = __exit_p(at91_reset_remove),
.driver = {
.name = "at91-reset",
.of_match_table = at91_reset_of_match,
},
- .id_table = at91_reset_plat_match,
};
module_platform_driver_probe(at91_reset_driver, at91_reset_probe);
diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
index 8a5ac97..90b0b5a 100644
--- a/drivers/power/reset/at91-sama5d2_shdwc.c
+++ b/drivers/power/reset/at91-sama5d2_shdwc.c
@@ -22,9 +22,12 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/printk.h>
+#include <soc/at91/at91sam9_ddrsdr.h>
+
#define SLOW_CLOCK_FREQ 32768
#define AT91_SHDW_CR 0x00 /* Shut Down Control Register */
@@ -75,6 +78,7 @@ struct shdwc {
*/
static struct shdwc *at91_shdwc;
static struct clk *sclk;
+static void __iomem *mpddrc_base;
static const unsigned long long sdwc_dbc_period[] = {
0, 3, 32, 512, 4096, 32768,
@@ -108,6 +112,29 @@ static void at91_poweroff(void)
at91_shdwc->at91_shdwc_base + AT91_SHDW_CR);
}
+static void at91_lpddr_poweroff(void)
+{
+ asm volatile(
+ /* Align to cache lines */
+ ".balign 32\n\t"
+
+ /* Ensure AT91_SHDW_CR is in the TLB by reading it */
+ " ldr r6, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t"
+
+ /* Power down SDRAM0 */
+ " str %1, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t"
+ /* Shutdown CPU */
+ " str %3, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t"
+
+ " b .\n\t"
+ :
+ : "r" (mpddrc_base),
+ "r" cpu_to_le32(AT91_DDRSDRC_LPDDR2_PWOFF),
+ "r" (at91_shdwc->at91_shdwc_base),
+ "r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW)
+ : "r0");
+}
+
static u32 at91_shdwc_debouncer_value(struct platform_device *pdev,
u32 in_period_us)
{
@@ -212,6 +239,8 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
{
struct resource *res;
const struct of_device_id *match;
+ struct device_node *np;
+ u32 ddr_type;
int ret;
if (!pdev->dev.of_node)
@@ -249,6 +278,23 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
pm_power_off = at91_poweroff;
+ np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
+ if (!np)
+ return 0;
+
+ mpddrc_base = of_iomap(np, 0);
+ of_node_put(np);
+
+ if (!mpddrc_base)
+ return 0;
+
+ ddr_type = readl(mpddrc_base + AT91_DDRSDRC_MDR) & AT91_DDRSDRC_MD;
+ if ((ddr_type == AT91_DDRSDRC_MD_LPDDR2) ||
+ (ddr_type == AT91_DDRSDRC_MD_LPDDR3))
+ pm_power_off = at91_lpddr_poweroff;
+ else
+ iounmap(mpddrc_base);
+
return 0;
}
@@ -256,7 +302,8 @@ static int __exit at91_shdwc_remove(struct platform_device *pdev)
{
struct shdwc *shdw = platform_get_drvdata(pdev);
- if (pm_power_off == at91_poweroff)
+ if (pm_power_off == at91_poweroff ||
+ pm_power_off == at91_lpddr_poweroff)
pm_power_off = NULL;
/* Reset values to disable wake-up features */
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 76806a0..da54ac8 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -164,6 +164,12 @@
Say Y to include support for SBS battery driver for SBS-compliant
gas gauges.
+config CHARGER_SBS
+ tristate "SBS Compliant charger"
+ depends on I2C
+ help
+ Say Y to include support for SBS compilant battery chargers.
+
config BATTERY_BQ27XXX
tristate "BQ27xxx battery driver"
help
@@ -214,6 +220,18 @@
This driver can also be built as a module. If so, the module will be
called da9150-fg.
+config CHARGER_AXP20X
+ tristate "X-Powers AXP20X and AXP22X AC power supply driver"
+ depends on MFD_AXP20X
+ depends on AXP20X_ADC
+ depends on IIO
+ help
+ Say Y here to enable support for X-Powers AXP20X and AXP22X PMICs' AC
+ power supply.
+
+ This driver can also be built as a module. If so, the module will be
+ called axp20x_ac_power.
+
config AXP288_CHARGER
tristate "X-Powers AXP288 Charger"
depends on MFD_AXP20X && EXTCON_AXP288
@@ -292,13 +310,6 @@
This driver can be build as a module. If so, the module will be
called jz4740-battery.
-config BATTERY_INTEL_MID
- tristate "Battery driver for Intel MID platforms"
- depends on INTEL_SCU_IPC && SPI
- help
- Say Y here to enable the battery driver on Intel MID
- platforms.
-
config BATTERY_RX51
tristate "Nokia RX-51 (N900) battery driver"
depends on TWL4030_MADC
@@ -370,6 +381,16 @@
Say Y to enable support for the battery charger control sysfs and
platform data of MAX14577/77836 MUICs.
+config CHARGER_DETECTOR_MAX14656
+ tristate "Maxim MAX14656 USB charger detector"
+ depends on I2C
+ depends on OF
+ help
+ Say Y to enable support for the Maxim MAX14656 USB charger detector.
+ The device is compliant with the USB Battery Charging Specification
+ Revision 1.2 and can be found e.g. in Kindle 4/5th generation
+ readers and certain LG devices.
+
config CHARGER_MAX77693
tristate "Maxim MAX77693 battery charger driver"
depends on MFD_MAX77693
@@ -395,6 +416,7 @@
depends on MFD_SPMI_PMIC || COMPILE_TEST
depends on OF
depends on EXTCON
+ depends on REGULATOR
help
Say Y to include support for the Switch-Mode Battery Charger and
Boost (SMBB) hardware found in Qualcomm PM8941 PMICs. The charger
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index 36c599d..3789a2c 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -18,6 +18,7 @@
obj-$(CONFIG_BATTERY_88PM860X) += 88pm860x_battery.o
obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o
+obj-$(CONFIG_CHARGER_AXP20X) += axp20x_ac_power.o
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o
obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o
@@ -31,6 +32,7 @@
obj-$(CONFIG_BATTERY_IPAQ_MICRO) += ipaq_micro_battery.o
obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o
obj-$(CONFIG_BATTERY_SBS) += sbs-battery.o
+obj-$(CONFIG_CHARGER_SBS) += sbs-charger.o
obj-$(CONFIG_BATTERY_BQ27XXX) += bq27xxx_battery.o
obj-$(CONFIG_BATTERY_BQ27XXX_I2C) += bq27xxx_battery_i2c.o
obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o
@@ -47,7 +49,6 @@
obj-$(CONFIG_CHARGER_88PM860X) += 88pm860x_charger.o
obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o
-obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o
obj-$(CONFIG_BATTERY_RX51) += rx51_battery.o
obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o pm2301_charger.o
obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o
@@ -58,6 +59,7 @@
obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o
obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o
obj-$(CONFIG_CHARGER_MAX14577) += max14577_charger.o
+obj-$(CONFIG_CHARGER_DETECTOR_MAX14656) += max14656_charger_detector.o
obj-$(CONFIG_CHARGER_MAX77693) += max77693_charger.o
obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o
obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
diff --git a/drivers/power/supply/ab8500_btemp.c b/drivers/power/supply/ab8500_btemp.c
index 6ffdc18..f7a35eb 100644
--- a/drivers/power/supply/ab8500_btemp.c
+++ b/drivers/power/supply/ab8500_btemp.c
@@ -76,8 +76,8 @@ struct ab8500_btemp_ranges {
* @dev: Pointer to the structure device
* @node: List of AB8500 BTEMPs, hence prepared for reentrance
* @curr_source: What current source we use, in uA
- * @bat_temp: Dispatched battery temperature in degree Celcius
- * @prev_bat_temp Last measured battery temperature in degree Celcius
+ * @bat_temp: Dispatched battery temperature in degree Celsius
+ * @prev_bat_temp Last measured battery temperature in degree Celsius
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
* @fg: Pointer to the struct fg
@@ -123,10 +123,7 @@ static LIST_HEAD(ab8500_btemp_list);
*/
struct ab8500_btemp *ab8500_btemp_get(void)
{
- struct ab8500_btemp *btemp;
- btemp = list_first_entry(&ab8500_btemp_list, struct ab8500_btemp, node);
-
- return btemp;
+ return list_first_entry(&ab8500_btemp_list, struct ab8500_btemp, node);
}
EXPORT_SYMBOL(ab8500_btemp_get);
@@ -464,13 +461,13 @@ static int ab8500_btemp_get_batctrl_res(struct ab8500_btemp *di)
* @tbl_size: size of the resistance to temperature table
* @res: resistance to calculate the temperature from
*
- * This function returns the battery temperature in degrees Celcius
+ * This function returns the battery temperature in degrees Celsius
* based on the NTC resistance.
*/
static int ab8500_btemp_res_to_temp(struct ab8500_btemp *di,
const struct abx500_res_to_temp *tbl, int tbl_size, int res)
{
- int i, temp;
+ int i;
/*
* Calculate the formula for the straight line
* Simple interpolation if we are within
@@ -488,9 +485,8 @@ static int ab8500_btemp_res_to_temp(struct ab8500_btemp *di,
i++;
}
- temp = tbl[i].temp + ((tbl[i + 1].temp - tbl[i].temp) *
+ return tbl[i].temp + ((tbl[i + 1].temp - tbl[i].temp) *
(res - tbl[i].resist)) / (tbl[i + 1].resist - tbl[i].resist);
- return temp;
}
/**
diff --git a/drivers/power/supply/axp20x_ac_power.c b/drivers/power/supply/axp20x_ac_power.c
new file mode 100644
index 0000000..38f4e87
--- /dev/null
+++ b/drivers/power/supply/axp20x_ac_power.c
@@ -0,0 +1,253 @@
+/*
+ * AXP20X and AXP22X PMICs' ACIN power supply driver
+ *
+ * Copyright (C) 2016 Free Electrons
+ * Quentin Schulz <quentin.schulz@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/iio/consumer.h>
+
+#define AXP20X_PWR_STATUS_ACIN_PRESENT BIT(7)
+#define AXP20X_PWR_STATUS_ACIN_AVAIL BIT(6)
+
+#define DRVNAME "axp20x-ac-power-supply"
+
+struct axp20x_ac_power {
+ struct regmap *regmap;
+ struct power_supply *supply;
+ struct iio_channel *acin_v;
+ struct iio_channel *acin_i;
+};
+
+static irqreturn_t axp20x_ac_power_irq(int irq, void *devid)
+{
+ struct axp20x_ac_power *power = devid;
+
+ power_supply_changed(power->supply);
+
+ return IRQ_HANDLED;
+}
+
+static int axp20x_ac_power_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct axp20x_ac_power *power = power_supply_get_drvdata(psy);
+ int ret, reg;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, ®);
+ if (ret)
+ return ret;
+
+ if (reg & AXP20X_PWR_STATUS_ACIN_PRESENT) {
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ return 0;
+ }
+
+ val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+ return 0;
+
+ case POWER_SUPPLY_PROP_PRESENT:
+ ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, ®);
+ if (ret)
+ return ret;
+
+ val->intval = !!(reg & AXP20X_PWR_STATUS_ACIN_PRESENT);
+ return 0;
+
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, ®);
+ if (ret)
+ return ret;
+
+ val->intval = !!(reg & AXP20X_PWR_STATUS_ACIN_AVAIL);
+ return 0;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = iio_read_channel_processed(power->acin_v, &val->intval);
+ if (ret)
+ return ret;
+
+ /* IIO framework gives mV but Power Supply framework gives uV */
+ val->intval *= 1000;
+
+ return 0;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = iio_read_channel_processed(power->acin_i, &val->intval);
+ if (ret)
+ return ret;
+
+ /* IIO framework gives mA but Power Supply framework gives uA */
+ val->intval *= 1000;
+
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL;
+}
+
+static enum power_supply_property axp20x_ac_power_properties[] = {
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static enum power_supply_property axp22x_ac_power_properties[] = {
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static const struct power_supply_desc axp20x_ac_power_desc = {
+ .name = "axp20x-ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = axp20x_ac_power_properties,
+ .num_properties = ARRAY_SIZE(axp20x_ac_power_properties),
+ .get_property = axp20x_ac_power_get_property,
+};
+
+static const struct power_supply_desc axp22x_ac_power_desc = {
+ .name = "axp22x-ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = axp22x_ac_power_properties,
+ .num_properties = ARRAY_SIZE(axp22x_ac_power_properties),
+ .get_property = axp20x_ac_power_get_property,
+};
+
+struct axp_data {
+ const struct power_supply_desc *power_desc;
+ bool acin_adc;
+};
+
+static const struct axp_data axp20x_data = {
+ .power_desc = &axp20x_ac_power_desc,
+ .acin_adc = true,
+};
+
+static const struct axp_data axp22x_data = {
+ .power_desc = &axp22x_ac_power_desc,
+ .acin_adc = false,
+};
+
+static int axp20x_ac_power_probe(struct platform_device *pdev)
+{
+ struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+ struct power_supply_config psy_cfg = {};
+ struct axp20x_ac_power *power;
+ struct axp_data *axp_data;
+ static const char * const irq_names[] = { "ACIN_PLUGIN", "ACIN_REMOVAL",
+ NULL };
+ int i, irq, ret;
+
+ if (!of_device_is_available(pdev->dev.of_node))
+ return -ENODEV;
+
+ if (!axp20x) {
+ dev_err(&pdev->dev, "Parent drvdata not set\n");
+ return -EINVAL;
+ }
+
+ power = devm_kzalloc(&pdev->dev, sizeof(*power), GFP_KERNEL);
+ if (!power)
+ return -ENOMEM;
+
+ axp_data = (struct axp_data *)of_device_get_match_data(&pdev->dev);
+
+ if (axp_data->acin_adc) {
+ power->acin_v = devm_iio_channel_get(&pdev->dev, "acin_v");
+ if (IS_ERR(power->acin_v)) {
+ if (PTR_ERR(power->acin_v) == -ENODEV)
+ return -EPROBE_DEFER;
+ return PTR_ERR(power->acin_v);
+ }
+
+ power->acin_i = devm_iio_channel_get(&pdev->dev, "acin_i");
+ if (IS_ERR(power->acin_i)) {
+ if (PTR_ERR(power->acin_i) == -ENODEV)
+ return -EPROBE_DEFER;
+ return PTR_ERR(power->acin_i);
+ }
+ }
+
+ power->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+
+ platform_set_drvdata(pdev, power);
+
+ psy_cfg.of_node = pdev->dev.of_node;
+ psy_cfg.drv_data = power;
+
+ power->supply = devm_power_supply_register(&pdev->dev,
+ axp_data->power_desc,
+ &psy_cfg);
+ if (IS_ERR(power->supply))
+ return PTR_ERR(power->supply);
+
+ /* Request irqs after registering, as irqs may trigger immediately */
+ for (i = 0; irq_names[i]; i++) {
+ irq = platform_get_irq_byname(pdev, irq_names[i]);
+ if (irq < 0) {
+ dev_warn(&pdev->dev, "No IRQ for %s: %d\n",
+ irq_names[i], irq);
+ continue;
+ }
+ irq = regmap_irq_get_virq(axp20x->regmap_irqc, irq);
+ ret = devm_request_any_context_irq(&pdev->dev, irq,
+ axp20x_ac_power_irq, 0,
+ DRVNAME, power);
+ if (ret < 0)
+ dev_warn(&pdev->dev, "Error requesting %s IRQ: %d\n",
+ irq_names[i], ret);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id axp20x_ac_power_match[] = {
+ {
+ .compatible = "x-powers,axp202-ac-power-supply",
+ .data = (void *)&axp20x_data,
+ }, {
+ .compatible = "x-powers,axp221-ac-power-supply",
+ .data = (void *)&axp22x_data,
+ }, { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, axp20x_ac_power_match);
+
+static struct platform_driver axp20x_ac_power_driver = {
+ .probe = axp20x_ac_power_probe,
+ .driver = {
+ .name = DRVNAME,
+ .of_match_table = axp20x_ac_power_match,
+ },
+};
+
+module_platform_driver(axp20x_ac_power_driver);
+
+MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>");
+MODULE_DESCRIPTION("AXP20X and AXP22X PMICs' AC power supply driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/axp20x_usb_power.c b/drivers/power/supply/axp20x_usb_power.c
index 6af6feb..2397c48 100644
--- a/drivers/power/supply/axp20x_usb_power.c
+++ b/drivers/power/supply/axp20x_usb_power.c
@@ -17,10 +17,12 @@
#include <linux/mfd/axp20x.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/regmap.h>
#include <linux/slab.h>
+#include <linux/iio/consumer.h>
#define DRVNAME "axp20x-usb-power-supply"
@@ -30,6 +32,8 @@
#define AXP20X_USB_STATUS_VBUS_VALID BIT(2)
#define AXP20X_VBUS_VHOLD_uV(b) (4000000 + (((b) >> 3) & 7) * 100000)
+#define AXP20X_VBUS_VHOLD_MASK GENMASK(5, 3)
+#define AXP20X_VBUS_VHOLD_OFFSET 3
#define AXP20X_VBUS_CLIMIT_MASK 3
#define AXP20X_VBUC_CLIMIT_900mA 0
#define AXP20X_VBUC_CLIMIT_500mA 1
@@ -45,6 +49,9 @@ struct axp20x_usb_power {
struct device_node *np;
struct regmap *regmap;
struct power_supply *supply;
+ enum axp20x_variants axp20x_id;
+ struct iio_channel *vbus_v;
+ struct iio_channel *vbus_i;
};
static irqreturn_t axp20x_usb_power_irq(int irq, void *devid)
@@ -72,6 +79,20 @@ static int axp20x_usb_power_get_property(struct power_supply *psy,
val->intval = AXP20X_VBUS_VHOLD_uV(v);
return 0;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (IS_ENABLED(CONFIG_AXP20X_ADC)) {
+ ret = iio_read_channel_processed(power->vbus_v,
+ &val->intval);
+ if (ret)
+ return ret;
+
+ /*
+ * IIO framework gives mV but Power Supply framework
+ * gives uV.
+ */
+ val->intval *= 1000;
+ return 0;
+ }
+
ret = axp20x_read_variable_width(power->regmap,
AXP20X_VBUS_V_ADC_H, 12);
if (ret < 0)
@@ -86,12 +107,10 @@ static int axp20x_usb_power_get_property(struct power_supply *psy,
switch (v & AXP20X_VBUS_CLIMIT_MASK) {
case AXP20X_VBUC_CLIMIT_100mA:
- if (of_device_is_compatible(power->np,
- "x-powers,axp202-usb-power-supply")) {
- val->intval = 100000;
- } else {
+ if (power->axp20x_id == AXP221_ID)
val->intval = -1; /* No 100mA limit */
- }
+ else
+ val->intval = 100000;
break;
case AXP20X_VBUC_CLIMIT_500mA:
val->intval = 500000;
@@ -105,6 +124,20 @@ static int axp20x_usb_power_get_property(struct power_supply *psy,
}
return 0;
case POWER_SUPPLY_PROP_CURRENT_NOW:
+ if (IS_ENABLED(CONFIG_AXP20X_ADC)) {
+ ret = iio_read_channel_processed(power->vbus_i,
+ &val->intval);
+ if (ret)
+ return ret;
+
+ /*
+ * IIO framework gives mA but Power Supply framework
+ * gives uA.
+ */
+ val->intval *= 1000;
+ return 0;
+ }
+
ret = axp20x_read_variable_width(power->regmap,
AXP20X_VBUS_I_ADC_H, 12);
if (ret < 0)
@@ -130,8 +163,7 @@ static int axp20x_usb_power_get_property(struct power_supply *psy,
val->intval = POWER_SUPPLY_HEALTH_GOOD;
- if (of_device_is_compatible(power->np,
- "x-powers,axp202-usb-power-supply")) {
+ if (power->axp20x_id == AXP202_ID) {
ret = regmap_read(power->regmap,
AXP20X_USB_OTG_STATUS, &v);
if (ret)
@@ -155,6 +187,81 @@ static int axp20x_usb_power_get_property(struct power_supply *psy,
return 0;
}
+static int axp20x_usb_power_set_voltage_min(struct axp20x_usb_power *power,
+ int intval)
+{
+ int val;
+
+ switch (intval) {
+ case 4000000:
+ case 4100000:
+ case 4200000:
+ case 4300000:
+ case 4400000:
+ case 4500000:
+ case 4600000:
+ case 4700000:
+ val = (intval - 4000000) / 100000;
+ return regmap_update_bits(power->regmap,
+ AXP20X_VBUS_IPSOUT_MGMT,
+ AXP20X_VBUS_VHOLD_MASK,
+ val << AXP20X_VBUS_VHOLD_OFFSET);
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL;
+}
+
+static int axp20x_usb_power_set_current_max(struct axp20x_usb_power *power,
+ int intval)
+{
+ int val;
+
+ switch (intval) {
+ case 100000:
+ if (power->axp20x_id == AXP221_ID)
+ return -EINVAL;
+ case 500000:
+ case 900000:
+ val = (900000 - intval) / 400000;
+ return regmap_update_bits(power->regmap,
+ AXP20X_VBUS_IPSOUT_MGMT,
+ AXP20X_VBUS_CLIMIT_MASK, val);
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL;
+}
+
+static int axp20x_usb_power_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct axp20x_usb_power *power = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+ return axp20x_usb_power_set_voltage_min(power, val->intval);
+
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ return axp20x_usb_power_set_current_max(power, val->intval);
+
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL;
+}
+
+static int axp20x_usb_power_prop_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN ||
+ psp == POWER_SUPPLY_PROP_CURRENT_MAX;
+}
+
static enum power_supply_property axp20x_usb_power_properties[] = {
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_PRESENT,
@@ -178,7 +285,9 @@ static const struct power_supply_desc axp20x_usb_power_desc = {
.type = POWER_SUPPLY_TYPE_USB,
.properties = axp20x_usb_power_properties,
.num_properties = ARRAY_SIZE(axp20x_usb_power_properties),
+ .property_is_writeable = axp20x_usb_power_prop_writeable,
.get_property = axp20x_usb_power_get_property,
+ .set_property = axp20x_usb_power_set_property,
};
static const struct power_supply_desc axp22x_usb_power_desc = {
@@ -186,9 +295,41 @@ static const struct power_supply_desc axp22x_usb_power_desc = {
.type = POWER_SUPPLY_TYPE_USB,
.properties = axp22x_usb_power_properties,
.num_properties = ARRAY_SIZE(axp22x_usb_power_properties),
+ .property_is_writeable = axp20x_usb_power_prop_writeable,
.get_property = axp20x_usb_power_get_property,
+ .set_property = axp20x_usb_power_set_property,
};
+static int configure_iio_channels(struct platform_device *pdev,
+ struct axp20x_usb_power *power)
+{
+ power->vbus_v = devm_iio_channel_get(&pdev->dev, "vbus_v");
+ if (IS_ERR(power->vbus_v)) {
+ if (PTR_ERR(power->vbus_v) == -ENODEV)
+ return -EPROBE_DEFER;
+ return PTR_ERR(power->vbus_v);
+ }
+
+ power->vbus_i = devm_iio_channel_get(&pdev->dev, "vbus_i");
+ if (IS_ERR(power->vbus_i)) {
+ if (PTR_ERR(power->vbus_i) == -ENODEV)
+ return -EPROBE_DEFER;
+ return PTR_ERR(power->vbus_i);
+ }
+
+ return 0;
+}
+
+static int configure_adc_registers(struct axp20x_usb_power *power)
+{
+ /* Enable vbus voltage and current measurement */
+ return regmap_update_bits(power->regmap, AXP20X_ADC_EN1,
+ AXP20X_ADC_EN1_VBUS_CURR |
+ AXP20X_ADC_EN1_VBUS_VOLT,
+ AXP20X_ADC_EN1_VBUS_CURR |
+ AXP20X_ADC_EN1_VBUS_VOLT);
+}
+
static int axp20x_usb_power_probe(struct platform_device *pdev)
{
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
@@ -214,11 +355,13 @@ static int axp20x_usb_power_probe(struct platform_device *pdev)
if (!power)
return -ENOMEM;
+ power->axp20x_id = (enum axp20x_variants)of_device_get_match_data(
+ &pdev->dev);
+
power->np = pdev->dev.of_node;
power->regmap = axp20x->regmap;
- if (of_device_is_compatible(power->np,
- "x-powers,axp202-usb-power-supply")) {
+ if (power->axp20x_id == AXP202_ID) {
/* Enable vbus valid checking */
ret = regmap_update_bits(power->regmap, AXP20X_VBUS_MON,
AXP20X_VBUS_MON_VBUS_VALID,
@@ -226,17 +369,18 @@ static int axp20x_usb_power_probe(struct platform_device *pdev)
if (ret)
return ret;
- /* Enable vbus voltage and current measurement */
- ret = regmap_update_bits(power->regmap, AXP20X_ADC_EN1,
- AXP20X_ADC_EN1_VBUS_CURR | AXP20X_ADC_EN1_VBUS_VOLT,
- AXP20X_ADC_EN1_VBUS_CURR | AXP20X_ADC_EN1_VBUS_VOLT);
+ if (IS_ENABLED(CONFIG_AXP20X_ADC))
+ ret = configure_iio_channels(pdev, power);
+ else
+ ret = configure_adc_registers(power);
+
if (ret)
return ret;
usb_power_desc = &axp20x_usb_power_desc;
irq_names = axp20x_irq_names;
- } else if (of_device_is_compatible(power->np,
- "x-powers,axp221-usb-power-supply")) {
+ } else if (power->axp20x_id == AXP221_ID ||
+ power->axp20x_id == AXP223_ID) {
usb_power_desc = &axp22x_usb_power_desc;
irq_names = axp22x_irq_names;
} else {
@@ -273,9 +417,16 @@ static int axp20x_usb_power_probe(struct platform_device *pdev)
}
static const struct of_device_id axp20x_usb_power_match[] = {
- { .compatible = "x-powers,axp202-usb-power-supply" },
- { .compatible = "x-powers,axp221-usb-power-supply" },
- { }
+ {
+ .compatible = "x-powers,axp202-usb-power-supply",
+ .data = (void *)AXP202_ID,
+ }, {
+ .compatible = "x-powers,axp221-usb-power-supply",
+ .data = (void *)AXP221_ID,
+ }, {
+ .compatible = "x-powers,axp223-usb-power-supply",
+ .data = (void *)AXP223_ID,
+ }, { /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, axp20x_usb_power_match);
diff --git a/drivers/power/supply/axp288_charger.c b/drivers/power/supply/axp288_charger.c
index 75b8e0c..6be2fe2 100644
--- a/drivers/power/supply/axp288_charger.c
+++ b/drivers/power/supply/axp288_charger.c
@@ -90,20 +90,6 @@
#define CHRG_VLTFC_0C 0xA5 /* 0 DegC */
#define CHRG_VHTFC_45C 0x1F /* 45 DegC */
-#define BAT_IRQ_CFG_CHRG_DONE (1 << 2)
-#define BAT_IRQ_CFG_CHRG_START (1 << 3)
-#define BAT_IRQ_CFG_BAT_SAFE_EXIT (1 << 4)
-#define BAT_IRQ_CFG_BAT_SAFE_ENTER (1 << 5)
-#define BAT_IRQ_CFG_BAT_DISCON (1 << 6)
-#define BAT_IRQ_CFG_BAT_CONN (1 << 7)
-#define BAT_IRQ_CFG_BAT_MASK 0xFC
-
-#define TEMP_IRQ_CFG_QCBTU (1 << 4)
-#define TEMP_IRQ_CFG_CBTU (1 << 5)
-#define TEMP_IRQ_CFG_QCBTO (1 << 6)
-#define TEMP_IRQ_CFG_CBTO (1 << 7)
-#define TEMP_IRQ_CFG_MASK 0xF0
-
#define FG_CNTL_OCV_ADJ_EN (1 << 3)
#define CV_4100MV 4100 /* 4100mV */
@@ -127,6 +113,10 @@
#define ILIM_3000MA 3000 /* 3000mA */
#define AXP288_EXTCON_DEV_NAME "axp288_extcon"
+#define USB_HOST_EXTCON_DEV_NAME "INT3496:00"
+
+static const unsigned int cable_ids[] =
+ { EXTCON_CHG_USB_SDP, EXTCON_CHG_USB_CDP, EXTCON_CHG_USB_DCP };
enum {
VBUS_OV_IRQ = 0,
@@ -143,7 +133,6 @@ enum {
struct axp288_chrg_info {
struct platform_device *pdev;
- struct axp20x_chrg_pdata *pdata;
struct regmap *regmap;
struct regmap_irq_chip_data *regmap_irqc;
int irq[CHRG_INTR_END];
@@ -163,20 +152,16 @@ struct axp288_chrg_info {
struct extcon_dev *edev;
bool connected;
enum power_supply_type chg_type;
- struct notifier_block nb;
+ struct notifier_block nb[ARRAY_SIZE(cable_ids)];
struct work_struct work;
} cable;
- int health;
int inlmt;
int cc;
int cv;
int max_cc;
int max_cv;
- bool online;
- bool present;
- bool enable_charger;
- bool is_charger_enabled;
+ int is_charger_enabled;
};
static inline int axp288_charger_set_cc(struct axp288_chrg_info *info, int cc)
@@ -305,6 +290,9 @@ static int axp288_charger_enable_charger(struct axp288_chrg_info *info,
{
int ret;
+ if ((int)enable == info->is_charger_enabled)
+ return 0;
+
if (enable)
ret = regmap_update_bits(info->regmap, AXP20X_CHRG_CTRL1,
CHRG_CCCV_CHG_EN, CHRG_CCCV_CHG_EN);
@@ -430,8 +418,7 @@ static int axp288_charger_usb_get_property(struct power_supply *psy,
ret = axp288_charger_is_present(info);
if (ret < 0)
goto psy_get_prop_fail;
- info->present = ret;
- val->intval = info->present;
+ val->intval = ret;
break;
case POWER_SUPPLY_PROP_ONLINE:
/* Check for OTG case first */
@@ -442,8 +429,7 @@ static int axp288_charger_usb_get_property(struct power_supply *psy,
ret = axp288_charger_is_online(info);
if (ret < 0)
goto psy_get_prop_fail;
- info->online = ret;
- val->intval = info->online;
+ val->intval = ret;
break;
case POWER_SUPPLY_PROP_HEALTH:
val->intval = axp288_get_charger_health(info);
@@ -576,20 +562,20 @@ static void axp288_charger_extcon_evt_worker(struct work_struct *work)
struct axp288_chrg_info *info =
container_of(work, struct axp288_chrg_info, cable.work);
int ret, current_limit;
- bool changed = false;
struct extcon_dev *edev = info->cable.edev;
bool old_connected = info->cable.connected;
+ enum power_supply_type old_chg_type = info->cable.chg_type;
/* Determine cable/charger type */
- if (extcon_get_cable_state_(edev, EXTCON_CHG_USB_SDP) > 0) {
+ if (extcon_get_state(edev, EXTCON_CHG_USB_SDP) > 0) {
dev_dbg(&info->pdev->dev, "USB SDP charger is connected");
info->cable.connected = true;
info->cable.chg_type = POWER_SUPPLY_TYPE_USB;
- } else if (extcon_get_cable_state_(edev, EXTCON_CHG_USB_CDP) > 0) {
+ } else if (extcon_get_state(edev, EXTCON_CHG_USB_CDP) > 0) {
dev_dbg(&info->pdev->dev, "USB CDP charger is connected");
info->cable.connected = true;
info->cable.chg_type = POWER_SUPPLY_TYPE_USB_CDP;
- } else if (extcon_get_cable_state_(edev, EXTCON_CHG_USB_DCP) > 0) {
+ } else if (extcon_get_state(edev, EXTCON_CHG_USB_DCP) > 0) {
dev_dbg(&info->pdev->dev, "USB DCP charger is connected");
info->cable.connected = true;
info->cable.chg_type = POWER_SUPPLY_TYPE_USB_DCP;
@@ -601,22 +587,15 @@ static void axp288_charger_extcon_evt_worker(struct work_struct *work)
}
/* Cable status changed */
- if (old_connected != info->cable.connected)
- changed = true;
-
- if (!changed)
+ if (old_connected == info->cable.connected &&
+ old_chg_type == info->cable.chg_type)
return;
mutex_lock(&info->lock);
- if (info->is_charger_enabled && !info->cable.connected) {
- info->enable_charger = false;
- ret = axp288_charger_enable_charger(info, info->enable_charger);
- if (ret < 0)
- dev_err(&info->pdev->dev,
- "cannot disable charger (%d)", ret);
+ if (info->cable.connected) {
+ axp288_charger_enable_charger(info, false);
- } else if (!info->is_charger_enabled && info->cable.connected) {
switch (info->cable.chg_type) {
case POWER_SUPPLY_TYPE_USB:
current_limit = ILIM_500MA;
@@ -635,36 +614,49 @@ static void axp288_charger_extcon_evt_worker(struct work_struct *work)
/* Set vbus current limit first, then enable charger */
ret = axp288_charger_set_vbus_inlmt(info, current_limit);
- if (ret < 0) {
+ if (ret == 0)
+ axp288_charger_enable_charger(info, true);
+ else
dev_err(&info->pdev->dev,
"error setting current limit (%d)", ret);
- } else {
- info->enable_charger = (current_limit > 0);
- ret = axp288_charger_enable_charger(info,
- info->enable_charger);
- if (ret < 0)
- dev_err(&info->pdev->dev,
- "cannot enable charger (%d)", ret);
- }
+ } else {
+ axp288_charger_enable_charger(info, false);
}
- if (changed)
- info->health = axp288_get_charger_health(info);
-
mutex_unlock(&info->lock);
- if (changed)
- power_supply_changed(info->psy_usb);
+ power_supply_changed(info->psy_usb);
}
-static int axp288_charger_handle_cable_evt(struct notifier_block *nb,
- unsigned long event, void *param)
+/*
+ * We need 3 copies of this, because there is no way to find out for which
+ * cable id we are being called from the passed in arguments; and we must
+ * have a separate nb for each extcon_register_notifier call.
+ */
+static int axp288_charger_handle_cable0_evt(struct notifier_block *nb,
+ unsigned long event, void *param)
{
struct axp288_chrg_info *info =
- container_of(nb, struct axp288_chrg_info, cable.nb);
-
+ container_of(nb, struct axp288_chrg_info, cable.nb[0]);
schedule_work(&info->cable.work);
+ return NOTIFY_OK;
+}
+static int axp288_charger_handle_cable1_evt(struct notifier_block *nb,
+ unsigned long event, void *param)
+{
+ struct axp288_chrg_info *info =
+ container_of(nb, struct axp288_chrg_info, cable.nb[1]);
+ schedule_work(&info->cable.work);
+ return NOTIFY_OK;
+}
+
+static int axp288_charger_handle_cable2_evt(struct notifier_block *nb,
+ unsigned long event, void *param)
+{
+ struct axp288_chrg_info *info =
+ container_of(nb, struct axp288_chrg_info, cable.nb[2]);
+ schedule_work(&info->cable.work);
return NOTIFY_OK;
}
@@ -672,7 +664,17 @@ static void axp288_charger_otg_evt_worker(struct work_struct *work)
{
struct axp288_chrg_info *info =
container_of(work, struct axp288_chrg_info, otg.work);
- int ret;
+ struct extcon_dev *edev = info->otg.cable;
+ int ret, usb_host = extcon_get_state(edev, EXTCON_USB_HOST);
+
+ dev_dbg(&info->pdev->dev, "external connector USB-Host is %s\n",
+ usb_host ? "attached" : "detached");
+
+ /*
+ * Set usb_id_short flag to avoid running charger detection logic
+ * in case usb host.
+ */
+ info->otg.id_short = usb_host;
/* Disable VBUS path before enabling the 5V boost */
ret = axp288_charger_vbus_path_select(info, !info->otg.id_short);
@@ -685,135 +687,109 @@ static int axp288_charger_handle_otg_evt(struct notifier_block *nb,
{
struct axp288_chrg_info *info =
container_of(nb, struct axp288_chrg_info, otg.id_nb);
- struct extcon_dev *edev = info->otg.cable;
- int usb_host = extcon_get_cable_state_(edev, EXTCON_USB_HOST);
- dev_dbg(&info->pdev->dev, "external connector USB-Host is %s\n",
- usb_host ? "attached" : "detached");
-
- /*
- * Set usb_id_short flag to avoid running charger detection logic
- * in case usb host.
- */
- info->otg.id_short = usb_host;
schedule_work(&info->otg.work);
return NOTIFY_OK;
}
-static void charger_init_hw_regs(struct axp288_chrg_info *info)
+static int charger_init_hw_regs(struct axp288_chrg_info *info)
{
int ret, cc, cv;
unsigned int val;
/* Program temperature thresholds */
ret = regmap_write(info->regmap, AXP20X_V_LTF_CHRG, CHRG_VLTFC_0C);
- if (ret < 0)
- dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
+ if (ret < 0) {
+ dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
AXP20X_V_LTF_CHRG, ret);
+ return ret;
+ }
ret = regmap_write(info->regmap, AXP20X_V_HTF_CHRG, CHRG_VHTFC_45C);
- if (ret < 0)
- dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
+ if (ret < 0) {
+ dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
AXP20X_V_HTF_CHRG, ret);
+ return ret;
+ }
/* Do not turn-off charger o/p after charge cycle ends */
ret = regmap_update_bits(info->regmap,
AXP20X_CHRG_CTRL2,
- CNTL2_CHG_OUT_TURNON, 1);
- if (ret < 0)
- dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
+ CNTL2_CHG_OUT_TURNON, CNTL2_CHG_OUT_TURNON);
+ if (ret < 0) {
+ dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
AXP20X_CHRG_CTRL2, ret);
-
- /* Enable interrupts */
- ret = regmap_update_bits(info->regmap,
- AXP20X_IRQ2_EN,
- BAT_IRQ_CFG_BAT_MASK, 1);
- if (ret < 0)
- dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
- AXP20X_IRQ2_EN, ret);
-
- ret = regmap_update_bits(info->regmap, AXP20X_IRQ3_EN,
- TEMP_IRQ_CFG_MASK, 1);
- if (ret < 0)
- dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
- AXP20X_IRQ3_EN, ret);
+ return ret;
+ }
/* Setup ending condition for charging to be 10% of I(chrg) */
ret = regmap_update_bits(info->regmap,
AXP20X_CHRG_CTRL1,
CHRG_CCCV_ITERM_20P, 0);
- if (ret < 0)
- dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
+ if (ret < 0) {
+ dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
AXP20X_CHRG_CTRL1, ret);
+ return ret;
+ }
/* Disable OCV-SOC curve calibration */
ret = regmap_update_bits(info->regmap,
AXP20X_CC_CTRL,
FG_CNTL_OCV_ADJ_EN, 0);
- if (ret < 0)
- dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
+ if (ret < 0) {
+ dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
AXP20X_CC_CTRL, ret);
-
- /* Init charging current and voltage */
- info->max_cc = info->pdata->max_cc;
- info->max_cv = info->pdata->max_cv;
+ return ret;
+ }
/* Read current charge voltage and current limit */
ret = regmap_read(info->regmap, AXP20X_CHRG_CTRL1, &val);
if (ret < 0) {
- /* Assume default if cannot read */
- info->cc = info->pdata->def_cc;
- info->cv = info->pdata->def_cv;
- } else {
- /* Determine charge voltage */
- cv = (val & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS;
- switch (cv) {
- case CHRG_CCCV_CV_4100MV:
- info->cv = CV_4100MV;
- break;
- case CHRG_CCCV_CV_4150MV:
- info->cv = CV_4150MV;
- break;
- case CHRG_CCCV_CV_4200MV:
- info->cv = CV_4200MV;
- break;
- case CHRG_CCCV_CV_4350MV:
- info->cv = CV_4350MV;
- break;
- default:
- info->cv = INT_MAX;
- break;
- }
-
- /* Determine charge current limit */
- cc = (ret & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS;
- cc = (cc * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
- info->cc = cc;
-
- /* Program default charging voltage and current */
- cc = min(info->pdata->def_cc, info->max_cc);
- cv = min(info->pdata->def_cv, info->max_cv);
-
- ret = axp288_charger_set_cc(info, cc);
- if (ret < 0)
- dev_warn(&info->pdev->dev,
- "error(%d) in setting CC\n", ret);
-
- ret = axp288_charger_set_cv(info, cv);
- if (ret < 0)
- dev_warn(&info->pdev->dev,
- "error(%d) in setting CV\n", ret);
+ dev_err(&info->pdev->dev, "register(%x) read error(%d)\n",
+ AXP20X_CHRG_CTRL1, ret);
+ return ret;
}
+
+ /* Determine charge voltage */
+ cv = (val & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS;
+ switch (cv) {
+ case CHRG_CCCV_CV_4100MV:
+ info->cv = CV_4100MV;
+ break;
+ case CHRG_CCCV_CV_4150MV:
+ info->cv = CV_4150MV;
+ break;
+ case CHRG_CCCV_CV_4200MV:
+ info->cv = CV_4200MV;
+ break;
+ case CHRG_CCCV_CV_4350MV:
+ info->cv = CV_4350MV;
+ break;
+ }
+
+ /* Determine charge current limit */
+ cc = (ret & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS;
+ cc = (cc * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
+ info->cc = cc;
+
+ /*
+ * Do not allow the user to configure higher settings then those
+ * set by the firmware
+ */
+ info->max_cv = info->cv;
+ info->max_cc = info->cc;
+
+ return 0;
}
static int axp288_charger_probe(struct platform_device *pdev)
{
int ret, i, pirq;
struct axp288_chrg_info *info;
+ struct device *dev = &pdev->dev;
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
struct power_supply_config charger_cfg = {};
-
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
@@ -821,15 +797,8 @@ static int axp288_charger_probe(struct platform_device *pdev)
info->pdev = pdev;
info->regmap = axp20x->regmap;
info->regmap_irqc = axp20x->regmap_irqc;
- info->pdata = pdev->dev.platform_data;
-
- if (!info->pdata) {
- /* Try ACPI provided pdata via device properties */
- if (!device_property_present(&pdev->dev,
- "axp288_charger_data\n"))
- dev_err(&pdev->dev, "failed to get platform data\n");
- return -ENODEV;
- }
+ info->cable.chg_type = -1;
+ info->is_charger_enabled = -1;
info->cable.edev = extcon_get_extcon_dev(AXP288_EXTCON_DEV_NAME);
if (info->cable.edev == NULL) {
@@ -838,63 +807,55 @@ static int axp288_charger_probe(struct platform_device *pdev)
return -EPROBE_DEFER;
}
- /* Register for extcon notification */
- INIT_WORK(&info->cable.work, axp288_charger_extcon_evt_worker);
- info->cable.nb.notifier_call = axp288_charger_handle_cable_evt;
- ret = extcon_register_notifier(info->cable.edev, EXTCON_CHG_USB_SDP,
- &info->cable.nb);
- if (ret) {
- dev_err(&info->pdev->dev,
- "failed to register extcon notifier for SDP %d\n", ret);
- return ret;
- }
-
- ret = extcon_register_notifier(info->cable.edev, EXTCON_CHG_USB_CDP,
- &info->cable.nb);
- if (ret) {
- dev_err(&info->pdev->dev,
- "failed to register extcon notifier for CDP %d\n", ret);
- extcon_unregister_notifier(info->cable.edev,
- EXTCON_CHG_USB_SDP, &info->cable.nb);
- return ret;
- }
-
- ret = extcon_register_notifier(info->cable.edev, EXTCON_CHG_USB_DCP,
- &info->cable.nb);
- if (ret) {
- dev_err(&info->pdev->dev,
- "failed to register extcon notifier for DCP %d\n", ret);
- extcon_unregister_notifier(info->cable.edev,
- EXTCON_CHG_USB_SDP, &info->cable.nb);
- extcon_unregister_notifier(info->cable.edev,
- EXTCON_CHG_USB_CDP, &info->cable.nb);
- return ret;
+ info->otg.cable = extcon_get_extcon_dev(USB_HOST_EXTCON_DEV_NAME);
+ if (info->otg.cable == NULL) {
+ dev_dbg(dev, "EXTCON_USB_HOST is not ready, probe deferred\n");
+ return -EPROBE_DEFER;
}
platform_set_drvdata(pdev, info);
mutex_init(&info->lock);
+ ret = charger_init_hw_regs(info);
+ if (ret)
+ return ret;
+
/* Register with power supply class */
charger_cfg.drv_data = info;
- info->psy_usb = power_supply_register(&pdev->dev, &axp288_charger_desc,
- &charger_cfg);
+ info->psy_usb = devm_power_supply_register(dev, &axp288_charger_desc,
+ &charger_cfg);
if (IS_ERR(info->psy_usb)) {
- dev_err(&pdev->dev, "failed to register power supply charger\n");
ret = PTR_ERR(info->psy_usb);
- goto psy_reg_failed;
+ dev_err(dev, "failed to register power supply: %d\n", ret);
+ return ret;
}
+ /* Register for extcon notification */
+ INIT_WORK(&info->cable.work, axp288_charger_extcon_evt_worker);
+ info->cable.nb[0].notifier_call = axp288_charger_handle_cable0_evt;
+ info->cable.nb[1].notifier_call = axp288_charger_handle_cable1_evt;
+ info->cable.nb[2].notifier_call = axp288_charger_handle_cable2_evt;
+ for (i = 0; i < ARRAY_SIZE(cable_ids); i++) {
+ ret = devm_extcon_register_notifier(dev, info->cable.edev,
+ cable_ids[i], &info->cable.nb[i]);
+ if (ret) {
+ dev_err(dev, "failed to register extcon notifier for %u: %d\n",
+ cable_ids[i], ret);
+ return ret;
+ }
+ }
+ schedule_work(&info->cable.work);
+
/* Register for OTG notification */
INIT_WORK(&info->otg.work, axp288_charger_otg_evt_worker);
info->otg.id_nb.notifier_call = axp288_charger_handle_otg_evt;
- ret = extcon_register_notifier(info->otg.cable, EXTCON_USB_HOST,
- &info->otg.id_nb);
- if (ret)
- dev_warn(&pdev->dev, "failed to register otg notifier\n");
-
- if (info->otg.cable)
- info->otg.id_short = extcon_get_cable_state_(
- info->otg.cable, EXTCON_USB_HOST);
+ ret = devm_extcon_register_notifier(&pdev->dev, info->otg.cable,
+ EXTCON_USB_HOST, &info->otg.id_nb);
+ if (ret) {
+ dev_err(dev, "failed to register EXTCON_USB_HOST notifier\n");
+ return ret;
+ }
+ schedule_work(&info->otg.work);
/* Register charger interrupts */
for (i = 0; i < CHRG_INTR_END; i++) {
@@ -903,8 +864,7 @@ static int axp288_charger_probe(struct platform_device *pdev)
if (info->irq[i] < 0) {
dev_warn(&info->pdev->dev,
"failed to get virtual interrupt=%d\n", pirq);
- ret = info->irq[i];
- goto intr_reg_failed;
+ return info->irq[i];
}
ret = devm_request_threaded_irq(&info->pdev->dev, info->irq[i],
NULL, axp288_charger_irq_thread_handler,
@@ -912,51 +872,22 @@ static int axp288_charger_probe(struct platform_device *pdev)
if (ret) {
dev_err(&pdev->dev, "failed to request interrupt=%d\n",
info->irq[i]);
- goto intr_reg_failed;
+ return ret;
}
}
- charger_init_hw_regs(info);
-
- return 0;
-
-intr_reg_failed:
- if (info->otg.cable)
- extcon_unregister_notifier(info->otg.cable, EXTCON_USB_HOST,
- &info->otg.id_nb);
- power_supply_unregister(info->psy_usb);
-psy_reg_failed:
- extcon_unregister_notifier(info->cable.edev, EXTCON_CHG_USB_SDP,
- &info->cable.nb);
- extcon_unregister_notifier(info->cable.edev, EXTCON_CHG_USB_CDP,
- &info->cable.nb);
- extcon_unregister_notifier(info->cable.edev, EXTCON_CHG_USB_DCP,
- &info->cable.nb);
- return ret;
-}
-
-static int axp288_charger_remove(struct platform_device *pdev)
-{
- struct axp288_chrg_info *info = dev_get_drvdata(&pdev->dev);
-
- if (info->otg.cable)
- extcon_unregister_notifier(info->otg.cable, EXTCON_USB_HOST,
- &info->otg.id_nb);
-
- extcon_unregister_notifier(info->cable.edev, EXTCON_CHG_USB_SDP,
- &info->cable.nb);
- extcon_unregister_notifier(info->cable.edev, EXTCON_CHG_USB_CDP,
- &info->cable.nb);
- extcon_unregister_notifier(info->cable.edev, EXTCON_CHG_USB_DCP,
- &info->cable.nb);
- power_supply_unregister(info->psy_usb);
-
return 0;
}
+static const struct platform_device_id axp288_charger_id_table[] = {
+ { .name = "axp288_charger" },
+ {},
+};
+MODULE_DEVICE_TABLE(platform, axp288_charger_id_table);
+
static struct platform_driver axp288_charger_driver = {
.probe = axp288_charger_probe,
- .remove = axp288_charger_remove,
+ .id_table = axp288_charger_id_table,
.driver = {
.name = "axp288_charger",
},
diff --git a/drivers/power/supply/axp288_fuel_gauge.c b/drivers/power/supply/axp288_fuel_gauge.c
index 539eb41..a8dcabc 100644
--- a/drivers/power/supply/axp288_fuel_gauge.c
+++ b/drivers/power/supply/axp288_fuel_gauge.c
@@ -29,6 +29,7 @@
#include <linux/iio/consumer.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
+#include <asm/unaligned.h>
#define CHRG_STAT_BAT_SAFE_MODE (1 << 3)
#define CHRG_STAT_BAT_VALID (1 << 4)
@@ -49,23 +50,6 @@
#define CHRG_CCCV_CV_4350MV 0x3 /* 4.35V */
#define CHRG_CCCV_CHG_EN (1 << 7)
-#define CV_4100 4100 /* 4100mV */
-#define CV_4150 4150 /* 4150mV */
-#define CV_4200 4200 /* 4200mV */
-#define CV_4350 4350 /* 4350mV */
-
-#define TEMP_IRQ_CFG_QWBTU (1 << 0)
-#define TEMP_IRQ_CFG_WBTU (1 << 1)
-#define TEMP_IRQ_CFG_QWBTO (1 << 2)
-#define TEMP_IRQ_CFG_WBTO (1 << 3)
-#define TEMP_IRQ_CFG_MASK 0xf
-
-#define FG_IRQ_CFG_LOWBATT_WL2 (1 << 0)
-#define FG_IRQ_CFG_LOWBATT_WL1 (1 << 1)
-#define FG_IRQ_CFG_LOWBATT_MASK 0x3
-#define LOWBAT_IRQ_STAT_LOWBATT_WL2 (1 << 0)
-#define LOWBAT_IRQ_STAT_LOWBATT_WL1 (1 << 1)
-
#define FG_CNTL_OCV_ADJ_STAT (1 << 2)
#define FG_CNTL_OCV_ADJ_EN (1 << 3)
#define FG_CNTL_CAP_ADJ_STAT (1 << 4)
@@ -73,17 +57,15 @@
#define FG_CNTL_CC_EN (1 << 6)
#define FG_CNTL_GAUGE_EN (1 << 7)
+#define FG_15BIT_WORD_VALID (1 << 15)
+#define FG_15BIT_VAL_MASK 0x7fff
+
#define FG_REP_CAP_VALID (1 << 7)
#define FG_REP_CAP_VAL_MASK 0x7F
#define FG_DES_CAP1_VALID (1 << 7)
-#define FG_DES_CAP1_VAL_MASK 0x7F
-#define FG_DES_CAP0_VAL_MASK 0xFF
#define FG_DES_CAP_RES_LSB 1456 /* 1.456mAhr */
-#define FG_CC_MTR1_VALID (1 << 7)
-#define FG_CC_MTR1_VAL_MASK 0x7F
-#define FG_CC_MTR0_VAL_MASK 0xFF
#define FG_DES_CC_RES_LSB 1456 /* 1.456mAhr */
#define FG_OCV_CAP_VALID (1 << 7)
@@ -104,9 +86,7 @@
/* 1.1mV per LSB expressed in uV */
#define VOLTAGE_FROM_ADC(a) ((a * 11) / 10)
-/* properties converted to tenths of degrees, uV, uA, uW */
-#define PROP_TEMP(a) ((a) * 10)
-#define UNPROP_TEMP(a) ((a) / 10)
+/* properties converted to uV, uA */
#define PROP_VOLT(a) ((a) * 1000)
#define PROP_CURR(a) ((a) * 1000)
@@ -122,13 +102,13 @@ enum {
struct axp288_fg_info {
struct platform_device *pdev;
- struct axp20x_fg_pdata *pdata;
struct regmap *regmap;
struct regmap_irq_chip_data *regmap_irqc;
int irq[AXP288_FG_INTR_NUM];
struct power_supply *bat;
struct mutex lock;
int status;
+ int max_volt;
struct delayed_work status_monitor;
struct dentry *debug_file;
};
@@ -138,22 +118,14 @@ static enum power_supply_property fuel_gauge_props[] = {
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
- POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_VOLTAGE_OCV,
POWER_SUPPLY_PROP_CURRENT_NOW,
POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN,
- POWER_SUPPLY_PROP_TEMP,
- POWER_SUPPLY_PROP_TEMP_MAX,
- POWER_SUPPLY_PROP_TEMP_MIN,
- POWER_SUPPLY_PROP_TEMP_ALERT_MIN,
- POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_CHARGE_FULL,
POWER_SUPPLY_PROP_CHARGE_NOW,
- POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
- POWER_SUPPLY_PROP_MODEL_NAME,
};
static int fuel_gauge_reg_readb(struct axp288_fg_info *info, int reg)
@@ -169,8 +141,10 @@ static int fuel_gauge_reg_readb(struct axp288_fg_info *info, int reg)
break;
}
- if (ret < 0)
+ if (ret < 0) {
dev_err(&info->pdev->dev, "axp288 reg read err:%d\n", ret);
+ return ret;
+ }
return val;
}
@@ -187,6 +161,44 @@ static int fuel_gauge_reg_writeb(struct axp288_fg_info *info, int reg, u8 val)
return ret;
}
+static int fuel_gauge_read_15bit_word(struct axp288_fg_info *info, int reg)
+{
+ unsigned char buf[2];
+ int ret;
+
+ ret = regmap_bulk_read(info->regmap, reg, buf, 2);
+ if (ret < 0) {
+ dev_err(&info->pdev->dev, "Error reading reg 0x%02x err: %d\n",
+ reg, ret);
+ return ret;
+ }
+
+ ret = get_unaligned_be16(buf);
+ if (!(ret & FG_15BIT_WORD_VALID)) {
+ dev_err(&info->pdev->dev, "Error reg 0x%02x contents not valid\n",
+ reg);
+ return -ENXIO;
+ }
+
+ return ret & FG_15BIT_VAL_MASK;
+}
+
+static int fuel_gauge_read_12bit_word(struct axp288_fg_info *info, int reg)
+{
+ unsigned char buf[2];
+ int ret;
+
+ ret = regmap_bulk_read(info->regmap, reg, buf, 2);
+ if (ret < 0) {
+ dev_err(&info->pdev->dev, "Error reading reg 0x%02x err: %d\n",
+ reg, ret);
+ return ret;
+ }
+
+ /* 12-bit data values have upper 8 bits in buf[0], lower 4 in buf[1] */
+ return (buf[0] << 4) | ((buf[1] >> 4) & 0x0f);
+}
+
static int pmic_read_adc_val(const char *name, int *raw_val,
struct axp288_fg_info *info)
{
@@ -247,24 +259,15 @@ static int fuel_gauge_debug_show(struct seq_file *s, void *data)
seq_printf(s, " FG_RDC0[%02x] : %02x\n",
AXP288_FG_RDC0_REG,
fuel_gauge_reg_readb(info, AXP288_FG_RDC0_REG));
- seq_printf(s, " FG_OCVH[%02x] : %02x\n",
+ seq_printf(s, " FG_OCV[%02x] : %04x\n",
AXP288_FG_OCVH_REG,
- fuel_gauge_reg_readb(info, AXP288_FG_OCVH_REG));
- seq_printf(s, " FG_OCVL[%02x] : %02x\n",
- AXP288_FG_OCVL_REG,
- fuel_gauge_reg_readb(info, AXP288_FG_OCVL_REG));
- seq_printf(s, "FG_DES_CAP1[%02x] : %02x\n",
+ fuel_gauge_read_12bit_word(info, AXP288_FG_OCVH_REG));
+ seq_printf(s, " FG_DES_CAP[%02x] : %04x\n",
AXP288_FG_DES_CAP1_REG,
- fuel_gauge_reg_readb(info, AXP288_FG_DES_CAP1_REG));
- seq_printf(s, "FG_DES_CAP0[%02x] : %02x\n",
- AXP288_FG_DES_CAP0_REG,
- fuel_gauge_reg_readb(info, AXP288_FG_DES_CAP0_REG));
- seq_printf(s, " FG_CC_MTR1[%02x] : %02x\n",
+ fuel_gauge_read_15bit_word(info, AXP288_FG_DES_CAP1_REG));
+ seq_printf(s, " FG_CC_MTR[%02x] : %04x\n",
AXP288_FG_CC_MTR1_REG,
- fuel_gauge_reg_readb(info, AXP288_FG_CC_MTR1_REG));
- seq_printf(s, " FG_CC_MTR0[%02x] : %02x\n",
- AXP288_FG_CC_MTR0_REG,
- fuel_gauge_reg_readb(info, AXP288_FG_CC_MTR0_REG));
+ fuel_gauge_read_15bit_word(info, AXP288_FG_CC_MTR1_REG));
seq_printf(s, " FG_OCV_CAP[%02x] : %02x\n",
AXP288_FG_OCV_CAP_REG,
fuel_gauge_reg_readb(info, AXP288_FG_OCV_CAP_REG));
@@ -417,143 +420,27 @@ static int fuel_gauge_get_current(struct axp288_fg_info *info, int *cur)
return ret;
}
-static int temp_to_adc(struct axp288_fg_info *info, int tval)
-{
- int rntc = 0, i, ret, adc_val;
- int rmin, rmax, tmin, tmax;
- int tcsz = info->pdata->tcsz;
-
- /* get the Rntc resitance value for this temp */
- if (tval > info->pdata->thermistor_curve[0][1]) {
- rntc = info->pdata->thermistor_curve[0][0];
- } else if (tval <= info->pdata->thermistor_curve[tcsz-1][1]) {
- rntc = info->pdata->thermistor_curve[tcsz-1][0];
- } else {
- for (i = 1; i < tcsz; i++) {
- if (tval > info->pdata->thermistor_curve[i][1]) {
- rmin = info->pdata->thermistor_curve[i-1][0];
- rmax = info->pdata->thermistor_curve[i][0];
- tmin = info->pdata->thermistor_curve[i-1][1];
- tmax = info->pdata->thermistor_curve[i][1];
- rntc = rmin + ((rmax - rmin) *
- (tval - tmin) / (tmax - tmin));
- break;
- }
- }
- }
-
- /* we need the current to calculate the proper adc voltage */
- ret = fuel_gauge_reg_readb(info, AXP20X_ADC_RATE);
- if (ret < 0) {
- dev_err(&info->pdev->dev, "%s:read err:%d\n", __func__, ret);
- ret = 0x30;
- }
-
- /*
- * temperature is proportional to NTS thermistor resistance
- * ADC_RATE[5-4] determines current, 00=20uA,01=40uA,10=60uA,11=80uA
- * [12-bit ADC VAL] = R_NTC(Ω) * current / 800
- */
- adc_val = rntc * (20 + (20 * ((ret >> 4) & 0x3))) / 800;
-
- return adc_val;
-}
-
-static int adc_to_temp(struct axp288_fg_info *info, int adc_val)
-{
- int ret, r, i, tval = 0;
- int rmin, rmax, tmin, tmax;
- int tcsz = info->pdata->tcsz;
-
- ret = fuel_gauge_reg_readb(info, AXP20X_ADC_RATE);
- if (ret < 0) {
- dev_err(&info->pdev->dev, "%s:read err:%d\n", __func__, ret);
- ret = 0x30;
- }
-
- /*
- * temperature is proportional to NTS thermistor resistance
- * ADC_RATE[5-4] determines current, 00=20uA,01=40uA,10=60uA,11=80uA
- * R_NTC(Ω) = [12-bit ADC VAL] * 800 / current
- */
- r = adc_val * 800 / (20 + (20 * ((ret >> 4) & 0x3)));
-
- if (r < info->pdata->thermistor_curve[0][0]) {
- tval = info->pdata->thermistor_curve[0][1];
- } else if (r >= info->pdata->thermistor_curve[tcsz-1][0]) {
- tval = info->pdata->thermistor_curve[tcsz-1][1];
- } else {
- for (i = 1; i < tcsz; i++) {
- if (r < info->pdata->thermistor_curve[i][0]) {
- rmin = info->pdata->thermistor_curve[i-1][0];
- rmax = info->pdata->thermistor_curve[i][0];
- tmin = info->pdata->thermistor_curve[i-1][1];
- tmax = info->pdata->thermistor_curve[i][1];
- tval = tmin + ((tmax - tmin) *
- (r - rmin) / (rmax - rmin));
- break;
- }
- }
- }
-
- return tval;
-}
-
-static int fuel_gauge_get_btemp(struct axp288_fg_info *info, int *btemp)
-{
- int ret, raw_val = 0;
-
- ret = pmic_read_adc_val("axp288-batt-temp", &raw_val, info);
- if (ret < 0)
- goto temp_read_fail;
-
- *btemp = adc_to_temp(info, raw_val);
-
-temp_read_fail:
- return ret;
-}
-
static int fuel_gauge_get_vocv(struct axp288_fg_info *info, int *vocv)
{
- int ret, value;
+ int ret;
- /* 12-bit data value, upper 8 in OCVH, lower 4 in OCVL */
- ret = fuel_gauge_reg_readb(info, AXP288_FG_OCVH_REG);
- if (ret < 0)
- goto vocv_read_fail;
- value = ret << 4;
+ ret = fuel_gauge_read_12bit_word(info, AXP288_FG_OCVH_REG);
+ if (ret >= 0)
+ *vocv = VOLTAGE_FROM_ADC(ret);
- ret = fuel_gauge_reg_readb(info, AXP288_FG_OCVL_REG);
- if (ret < 0)
- goto vocv_read_fail;
- value |= (ret & 0xf);
-
- *vocv = VOLTAGE_FROM_ADC(value);
-vocv_read_fail:
return ret;
}
static int fuel_gauge_battery_health(struct axp288_fg_info *info)
{
- int temp, vocv;
- int ret, health = POWER_SUPPLY_HEALTH_UNKNOWN;
-
- ret = fuel_gauge_get_btemp(info, &temp);
- if (ret < 0)
- goto health_read_fail;
+ int ret, vocv, health = POWER_SUPPLY_HEALTH_UNKNOWN;
ret = fuel_gauge_get_vocv(info, &vocv);
if (ret < 0)
goto health_read_fail;
- if (vocv > info->pdata->max_volt)
+ if (vocv > info->max_volt)
health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
- else if (temp > info->pdata->max_temp)
- health = POWER_SUPPLY_HEALTH_OVERHEAT;
- else if (temp < info->pdata->min_temp)
- health = POWER_SUPPLY_HEALTH_COLD;
- else if (vocv < info->pdata->min_volt)
- health = POWER_SUPPLY_HEALTH_DEAD;
else
health = POWER_SUPPLY_HEALTH_GOOD;
@@ -561,28 +448,6 @@ static int fuel_gauge_battery_health(struct axp288_fg_info *info)
return health;
}
-static int fuel_gauge_set_high_btemp_alert(struct axp288_fg_info *info)
-{
- int ret, adc_val;
-
- /* program temperature threshold as 1/16 ADC value */
- adc_val = temp_to_adc(info, info->pdata->max_temp);
- ret = fuel_gauge_reg_writeb(info, AXP20X_V_HTF_DISCHRG, adc_val >> 4);
-
- return ret;
-}
-
-static int fuel_gauge_set_low_btemp_alert(struct axp288_fg_info *info)
-{
- int ret, adc_val;
-
- /* program temperature threshold as 1/16 ADC value */
- adc_val = temp_to_adc(info, info->pdata->min_temp);
- ret = fuel_gauge_reg_writeb(info, AXP20X_V_LTF_DISCHRG, adc_val >> 4);
-
- return ret;
-}
-
static int fuel_gauge_get_property(struct power_supply *ps,
enum power_supply_property prop,
union power_supply_propval *val)
@@ -643,58 +508,25 @@ static int fuel_gauge_get_property(struct power_supply *ps,
goto fuel_gauge_read_err;
val->intval = (ret & 0x0f);
break;
- case POWER_SUPPLY_PROP_TEMP:
- ret = fuel_gauge_get_btemp(info, &value);
- if (ret < 0)
- goto fuel_gauge_read_err;
- val->intval = PROP_TEMP(value);
- break;
- case POWER_SUPPLY_PROP_TEMP_MAX:
- case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
- val->intval = PROP_TEMP(info->pdata->max_temp);
- break;
- case POWER_SUPPLY_PROP_TEMP_MIN:
- case POWER_SUPPLY_PROP_TEMP_ALERT_MIN:
- val->intval = PROP_TEMP(info->pdata->min_temp);
- break;
case POWER_SUPPLY_PROP_TECHNOLOGY:
val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
break;
case POWER_SUPPLY_PROP_CHARGE_NOW:
- ret = fuel_gauge_reg_readb(info, AXP288_FG_CC_MTR1_REG);
+ ret = fuel_gauge_read_15bit_word(info, AXP288_FG_CC_MTR1_REG);
if (ret < 0)
goto fuel_gauge_read_err;
- value = (ret & FG_CC_MTR1_VAL_MASK) << 8;
- ret = fuel_gauge_reg_readb(info, AXP288_FG_CC_MTR0_REG);
- if (ret < 0)
- goto fuel_gauge_read_err;
- value |= (ret & FG_CC_MTR0_VAL_MASK);
- val->intval = value * FG_DES_CAP_RES_LSB;
+ val->intval = ret * FG_DES_CAP_RES_LSB;
break;
case POWER_SUPPLY_PROP_CHARGE_FULL:
- ret = fuel_gauge_reg_readb(info, AXP288_FG_DES_CAP1_REG);
+ ret = fuel_gauge_read_15bit_word(info, AXP288_FG_DES_CAP1_REG);
if (ret < 0)
goto fuel_gauge_read_err;
- value = (ret & FG_DES_CAP1_VAL_MASK) << 8;
- ret = fuel_gauge_reg_readb(info, AXP288_FG_DES_CAP0_REG);
- if (ret < 0)
- goto fuel_gauge_read_err;
- value |= (ret & FG_DES_CAP0_VAL_MASK);
- val->intval = value * FG_DES_CAP_RES_LSB;
- break;
- case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
- val->intval = PROP_CURR(info->pdata->design_cap);
+ val->intval = ret * FG_DES_CAP_RES_LSB;
break;
case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
- val->intval = PROP_VOLT(info->pdata->max_volt);
- break;
- case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
- val->intval = PROP_VOLT(info->pdata->min_volt);
- break;
- case POWER_SUPPLY_PROP_MODEL_NAME:
- val->strval = info->pdata->battid;
+ val->intval = PROP_VOLT(info->max_volt);
break;
default:
mutex_unlock(&info->lock);
@@ -718,35 +550,6 @@ static int fuel_gauge_set_property(struct power_supply *ps,
mutex_lock(&info->lock);
switch (prop) {
- case POWER_SUPPLY_PROP_STATUS:
- info->status = val->intval;
- break;
- case POWER_SUPPLY_PROP_TEMP_MIN:
- case POWER_SUPPLY_PROP_TEMP_ALERT_MIN:
- if ((val->intval < PD_DEF_MIN_TEMP) ||
- (val->intval > PD_DEF_MAX_TEMP)) {
- ret = -EINVAL;
- break;
- }
- info->pdata->min_temp = UNPROP_TEMP(val->intval);
- ret = fuel_gauge_set_low_btemp_alert(info);
- if (ret < 0)
- dev_err(&info->pdev->dev,
- "temp alert min set fail:%d\n", ret);
- break;
- case POWER_SUPPLY_PROP_TEMP_MAX:
- case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
- if ((val->intval < PD_DEF_MIN_TEMP) ||
- (val->intval > PD_DEF_MAX_TEMP)) {
- ret = -EINVAL;
- break;
- }
- info->pdata->max_temp = UNPROP_TEMP(val->intval);
- ret = fuel_gauge_set_high_btemp_alert(info);
- if (ret < 0)
- dev_err(&info->pdev->dev,
- "temp alert max set fail:%d\n", ret);
- break;
case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN:
if ((val->intval < 0) || (val->intval > 15)) {
ret = -EINVAL;
@@ -774,11 +577,6 @@ static int fuel_gauge_property_is_writeable(struct power_supply *psy,
int ret;
switch (psp) {
- case POWER_SUPPLY_PROP_STATUS:
- case POWER_SUPPLY_PROP_TEMP_MIN:
- case POWER_SUPPLY_PROP_TEMP_ALERT_MIN:
- case POWER_SUPPLY_PROP_TEMP_MAX:
- case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN:
ret = 1;
break;
@@ -863,158 +661,6 @@ static const struct power_supply_desc fuel_gauge_desc = {
.external_power_changed = fuel_gauge_external_power_changed,
};
-static int fuel_gauge_set_lowbatt_thresholds(struct axp288_fg_info *info)
-{
- int ret;
- u8 reg_val;
-
- ret = fuel_gauge_reg_readb(info, AXP20X_FG_RES);
- if (ret < 0) {
- dev_err(&info->pdev->dev, "%s:read err:%d\n", __func__, ret);
- return ret;
- }
- ret = (ret & FG_REP_CAP_VAL_MASK);
-
- if (ret > FG_LOW_CAP_WARN_THR)
- reg_val = FG_LOW_CAP_WARN_THR;
- else if (ret > FG_LOW_CAP_CRIT_THR)
- reg_val = FG_LOW_CAP_CRIT_THR;
- else
- reg_val = FG_LOW_CAP_SHDN_THR;
-
- reg_val |= FG_LOW_CAP_THR1_VAL;
- ret = fuel_gauge_reg_writeb(info, AXP288_FG_LOW_CAP_REG, reg_val);
- if (ret < 0)
- dev_err(&info->pdev->dev, "%s:write err:%d\n", __func__, ret);
-
- return ret;
-}
-
-static int fuel_gauge_program_vbatt_full(struct axp288_fg_info *info)
-{
- int ret;
- u8 val;
-
- ret = fuel_gauge_reg_readb(info, AXP20X_CHRG_CTRL1);
- if (ret < 0)
- goto fg_prog_ocv_fail;
- else
- val = (ret & ~CHRG_CCCV_CV_MASK);
-
- switch (info->pdata->max_volt) {
- case CV_4100:
- val |= (CHRG_CCCV_CV_4100MV << CHRG_CCCV_CV_BIT_POS);
- break;
- case CV_4150:
- val |= (CHRG_CCCV_CV_4150MV << CHRG_CCCV_CV_BIT_POS);
- break;
- case CV_4200:
- val |= (CHRG_CCCV_CV_4200MV << CHRG_CCCV_CV_BIT_POS);
- break;
- case CV_4350:
- val |= (CHRG_CCCV_CV_4350MV << CHRG_CCCV_CV_BIT_POS);
- break;
- default:
- val |= (CHRG_CCCV_CV_4200MV << CHRG_CCCV_CV_BIT_POS);
- break;
- }
-
- ret = fuel_gauge_reg_writeb(info, AXP20X_CHRG_CTRL1, val);
-fg_prog_ocv_fail:
- return ret;
-}
-
-static int fuel_gauge_program_design_cap(struct axp288_fg_info *info)
-{
- int ret;
-
- ret = fuel_gauge_reg_writeb(info,
- AXP288_FG_DES_CAP1_REG, info->pdata->cap1);
- if (ret < 0)
- goto fg_prog_descap_fail;
-
- ret = fuel_gauge_reg_writeb(info,
- AXP288_FG_DES_CAP0_REG, info->pdata->cap0);
-
-fg_prog_descap_fail:
- return ret;
-}
-
-static int fuel_gauge_program_ocv_curve(struct axp288_fg_info *info)
-{
- int ret = 0, i;
-
- for (i = 0; i < OCV_CURVE_SIZE; i++) {
- ret = fuel_gauge_reg_writeb(info,
- AXP288_FG_OCV_CURVE_REG + i, info->pdata->ocv_curve[i]);
- if (ret < 0)
- goto fg_prog_ocv_fail;
- }
-
-fg_prog_ocv_fail:
- return ret;
-}
-
-static int fuel_gauge_program_rdc_vals(struct axp288_fg_info *info)
-{
- int ret;
-
- ret = fuel_gauge_reg_writeb(info,
- AXP288_FG_RDC1_REG, info->pdata->rdc1);
- if (ret < 0)
- goto fg_prog_ocv_fail;
-
- ret = fuel_gauge_reg_writeb(info,
- AXP288_FG_RDC0_REG, info->pdata->rdc0);
-
-fg_prog_ocv_fail:
- return ret;
-}
-
-static void fuel_gauge_init_config_regs(struct axp288_fg_info *info)
-{
- int ret;
-
- /*
- * check if the config data is already
- * programmed and if so just return.
- */
-
- ret = fuel_gauge_reg_readb(info, AXP288_FG_DES_CAP1_REG);
- if (ret < 0) {
- dev_warn(&info->pdev->dev, "CAP1 reg read err!!\n");
- } else if (!(ret & FG_DES_CAP1_VALID)) {
- dev_info(&info->pdev->dev, "FG data needs to be initialized\n");
- } else {
- dev_info(&info->pdev->dev, "FG data is already initialized\n");
- return;
- }
-
- ret = fuel_gauge_program_vbatt_full(info);
- if (ret < 0)
- dev_err(&info->pdev->dev, "set vbatt full fail:%d\n", ret);
-
- ret = fuel_gauge_program_design_cap(info);
- if (ret < 0)
- dev_err(&info->pdev->dev, "set design cap fail:%d\n", ret);
-
- ret = fuel_gauge_program_rdc_vals(info);
- if (ret < 0)
- dev_err(&info->pdev->dev, "set rdc fail:%d\n", ret);
-
- ret = fuel_gauge_program_ocv_curve(info);
- if (ret < 0)
- dev_err(&info->pdev->dev, "set ocv curve fail:%d\n", ret);
-
- ret = fuel_gauge_set_lowbatt_thresholds(info);
- if (ret < 0)
- dev_err(&info->pdev->dev, "lowbatt thr set fail:%d\n", ret);
-
- ret = fuel_gauge_reg_writeb(info, AXP20X_CC_CTRL, 0xef);
- if (ret < 0)
- dev_err(&info->pdev->dev, "gauge cntl set fail:%d\n", ret);
-}
-
static void fuel_gauge_init_irq(struct axp288_fg_info *info)
{
int ret, i, pirq;
@@ -1052,29 +698,6 @@ static void fuel_gauge_init_irq(struct axp288_fg_info *info)
}
}
-static void fuel_gauge_init_hw_regs(struct axp288_fg_info *info)
-{
- int ret;
- unsigned int val;
-
- ret = fuel_gauge_set_high_btemp_alert(info);
- if (ret < 0)
- dev_err(&info->pdev->dev, "high batt temp set fail:%d\n", ret);
-
- ret = fuel_gauge_set_low_btemp_alert(info);
- if (ret < 0)
- dev_err(&info->pdev->dev, "low batt temp set fail:%d\n", ret);
-
- /* enable interrupts */
- val = fuel_gauge_reg_readb(info, AXP20X_IRQ3_EN);
- val |= TEMP_IRQ_CFG_MASK;
- fuel_gauge_reg_writeb(info, AXP20X_IRQ3_EN, val);
-
- val = fuel_gauge_reg_readb(info, AXP20X_IRQ4_EN);
- val |= FG_IRQ_CFG_LOWBATT_MASK;
- val = fuel_gauge_reg_writeb(info, AXP20X_IRQ4_EN, val);
-}
-
static int axp288_fuel_gauge_probe(struct platform_device *pdev)
{
int ret = 0;
@@ -1090,15 +713,39 @@ static int axp288_fuel_gauge_probe(struct platform_device *pdev)
info->regmap = axp20x->regmap;
info->regmap_irqc = axp20x->regmap_irqc;
info->status = POWER_SUPPLY_STATUS_UNKNOWN;
- info->pdata = pdev->dev.platform_data;
- if (!info->pdata)
- return -ENODEV;
platform_set_drvdata(pdev, info);
mutex_init(&info->lock);
INIT_DELAYED_WORK(&info->status_monitor, fuel_gauge_status_monitor);
+ ret = fuel_gauge_reg_readb(info, AXP288_FG_DES_CAP1_REG);
+ if (ret < 0)
+ return ret;
+
+ if (!(ret & FG_DES_CAP1_VALID)) {
+ dev_err(&pdev->dev, "axp288 not configured by firmware\n");
+ return -ENODEV;
+ }
+
+ ret = fuel_gauge_reg_readb(info, AXP20X_CHRG_CTRL1);
+ if (ret < 0)
+ return ret;
+ switch ((ret & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS) {
+ case CHRG_CCCV_CV_4100MV:
+ info->max_volt = 4100;
+ break;
+ case CHRG_CCCV_CV_4150MV:
+ info->max_volt = 4150;
+ break;
+ case CHRG_CCCV_CV_4200MV:
+ info->max_volt = 4200;
+ break;
+ case CHRG_CCCV_CV_4350MV:
+ info->max_volt = 4350;
+ break;
+ }
+
psy_cfg.drv_data = info;
info->bat = power_supply_register(&pdev->dev, &fuel_gauge_desc, &psy_cfg);
if (IS_ERR(info->bat)) {
@@ -1108,12 +755,10 @@ static int axp288_fuel_gauge_probe(struct platform_device *pdev)
}
fuel_gauge_create_debugfs(info);
- fuel_gauge_init_config_regs(info);
fuel_gauge_init_irq(info);
- fuel_gauge_init_hw_regs(info);
schedule_delayed_work(&info->status_monitor, STATUS_MON_DELAY_JIFFIES);
- return ret;
+ return 0;
}
static const struct platform_device_id axp288_fg_id_table[] = {
diff --git a/drivers/power/supply/bq2415x_charger.c b/drivers/power/supply/bq2415x_charger.c
index 73e2f0b..c4770a9 100644
--- a/drivers/power/supply/bq2415x_charger.c
+++ b/drivers/power/supply/bq2415x_charger.c
@@ -1569,6 +1569,11 @@ static int bq2415x_probe(struct i2c_client *client,
acpi_id =
acpi_match_device(client->dev.driver->acpi_match_table,
&client->dev);
+ if (!acpi_id) {
+ dev_err(&client->dev, "failed to match device name\n");
+ ret = -ENODEV;
+ goto error_1;
+ }
name = kasprintf(GFP_KERNEL, "%s-%d", acpi_id->id, num);
}
if (!name) {
diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
index e958433..a4f0849 100644
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -144,10 +144,7 @@
* so the first read after a fault returns the latched value and subsequent
* reads return the current value. In order to return the fault status
* to the user, have the interrupt handler save the reg's value and retrieve
- * it in the appropriate health/status routine. Each routine has its own
- * flag indicating whether it should use the value stored by the last run
- * of the interrupt handler or do an actual reg read. That way each routine
- * can report back whatever fault may have occured.
+ * it in the appropriate health/status routine.
*/
struct bq24190_dev_info {
struct i2c_client *client;
@@ -159,10 +156,6 @@ struct bq24190_dev_info {
unsigned int gpio_int;
unsigned int irq;
struct mutex f_reg_lock;
- bool first_time;
- bool charger_health_valid;
- bool battery_health_valid;
- bool battery_status_valid;
u8 f_reg;
u8 ss_reg;
u8 watchdog;
@@ -199,7 +192,7 @@ static const int bq24190_cvc_vreg_values[] = {
4400000
};
-/* REG06[1:0] (TREG) in tenths of degrees Celcius */
+/* REG06[1:0] (TREG) in tenths of degrees Celsius */
static const int bq24190_ictrc_treg_values[] = {
600, 800, 1000, 1200
};
@@ -636,21 +629,11 @@ static int bq24190_charger_get_health(struct bq24190_dev_info *bdi,
union power_supply_propval *val)
{
u8 v;
- int health, ret;
+ int health;
mutex_lock(&bdi->f_reg_lock);
-
- if (bdi->charger_health_valid) {
- v = bdi->f_reg;
- bdi->charger_health_valid = false;
- mutex_unlock(&bdi->f_reg_lock);
- } else {
- mutex_unlock(&bdi->f_reg_lock);
-
- ret = bq24190_read(bdi, BQ24190_REG_F, &v);
- if (ret < 0)
- return ret;
- }
+ v = bdi->f_reg;
+ mutex_unlock(&bdi->f_reg_lock);
if (v & BQ24190_REG_F_BOOST_FAULT_MASK) {
/*
@@ -937,18 +920,8 @@ static int bq24190_battery_get_status(struct bq24190_dev_info *bdi,
int status, ret;
mutex_lock(&bdi->f_reg_lock);
-
- if (bdi->battery_status_valid) {
- chrg_fault = bdi->f_reg;
- bdi->battery_status_valid = false;
- mutex_unlock(&bdi->f_reg_lock);
- } else {
- mutex_unlock(&bdi->f_reg_lock);
-
- ret = bq24190_read(bdi, BQ24190_REG_F, &chrg_fault);
- if (ret < 0)
- return ret;
- }
+ chrg_fault = bdi->f_reg;
+ mutex_unlock(&bdi->f_reg_lock);
chrg_fault &= BQ24190_REG_F_CHRG_FAULT_MASK;
chrg_fault >>= BQ24190_REG_F_CHRG_FAULT_SHIFT;
@@ -996,21 +969,11 @@ static int bq24190_battery_get_health(struct bq24190_dev_info *bdi,
union power_supply_propval *val)
{
u8 v;
- int health, ret;
+ int health;
mutex_lock(&bdi->f_reg_lock);
-
- if (bdi->battery_health_valid) {
- v = bdi->f_reg;
- bdi->battery_health_valid = false;
- mutex_unlock(&bdi->f_reg_lock);
- } else {
- mutex_unlock(&bdi->f_reg_lock);
-
- ret = bq24190_read(bdi, BQ24190_REG_F, &v);
- if (ret < 0)
- return ret;
- }
+ v = bdi->f_reg;
+ mutex_unlock(&bdi->f_reg_lock);
if (v & BQ24190_REG_F_BAT_FAULT_MASK) {
health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
@@ -1197,9 +1160,12 @@ static const struct power_supply_desc bq24190_battery_desc = {
static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
{
struct bq24190_dev_info *bdi = data;
- bool alert_userspace = false;
+ const u8 battery_mask_ss = BQ24190_REG_SS_CHRG_STAT_MASK;
+ const u8 battery_mask_f = BQ24190_REG_F_BAT_FAULT_MASK
+ | BQ24190_REG_F_NTC_FAULT_MASK;
+ bool alert_charger = false, alert_battery = false;
u8 ss_reg = 0, f_reg = 0;
- int ret;
+ int i, ret;
pm_runtime_get_sync(bdi->dev);
@@ -1209,6 +1175,32 @@ static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
goto out;
}
+ i = 0;
+ do {
+ ret = bq24190_read(bdi, BQ24190_REG_F, &f_reg);
+ if (ret < 0) {
+ dev_err(bdi->dev, "Can't read F reg: %d\n", ret);
+ goto out;
+ }
+ } while (f_reg && ++i < 2);
+
+ if (f_reg != bdi->f_reg) {
+ dev_info(bdi->dev,
+ "Fault: boost %d, charge %d, battery %d, ntc %d\n",
+ !!(f_reg & BQ24190_REG_F_BOOST_FAULT_MASK),
+ !!(f_reg & BQ24190_REG_F_CHRG_FAULT_MASK),
+ !!(f_reg & BQ24190_REG_F_BAT_FAULT_MASK),
+ !!(f_reg & BQ24190_REG_F_NTC_FAULT_MASK));
+
+ mutex_lock(&bdi->f_reg_lock);
+ if ((bdi->f_reg & battery_mask_f) != (f_reg & battery_mask_f))
+ alert_battery = true;
+ if ((bdi->f_reg & ~battery_mask_f) != (f_reg & ~battery_mask_f))
+ alert_charger = true;
+ bdi->f_reg = f_reg;
+ mutex_unlock(&bdi->f_reg_lock);
+ }
+
if (ss_reg != bdi->ss_reg) {
/*
* The device is in host mode so when PG_STAT goes from 1->0
@@ -1225,47 +1217,17 @@ static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
ret);
}
+ if ((bdi->ss_reg & battery_mask_ss) != (ss_reg & battery_mask_ss))
+ alert_battery = true;
+ if ((bdi->ss_reg & ~battery_mask_ss) != (ss_reg & ~battery_mask_ss))
+ alert_charger = true;
bdi->ss_reg = ss_reg;
- alert_userspace = true;
}
- mutex_lock(&bdi->f_reg_lock);
-
- ret = bq24190_read(bdi, BQ24190_REG_F, &f_reg);
- if (ret < 0) {
- mutex_unlock(&bdi->f_reg_lock);
- dev_err(bdi->dev, "Can't read F reg: %d\n", ret);
- goto out;
- }
-
- if (f_reg != bdi->f_reg) {
- bdi->f_reg = f_reg;
- bdi->charger_health_valid = true;
- bdi->battery_health_valid = true;
- bdi->battery_status_valid = true;
-
- alert_userspace = true;
- }
-
- mutex_unlock(&bdi->f_reg_lock);
-
- /*
- * Sometimes bq24190 gives a steady trickle of interrupts even
- * though the watchdog timer is turned off and neither the STATUS
- * nor FAULT registers have changed. Weed out these sprurious
- * interrupts so userspace isn't alerted for no reason.
- * In addition, the chip always generates an interrupt after
- * register reset so we should ignore that one (the very first
- * interrupt received).
- */
- if (alert_userspace) {
- if (!bdi->first_time) {
- power_supply_changed(bdi->charger);
- power_supply_changed(bdi->battery);
- } else {
- bdi->first_time = false;
- }
- }
+ if (alert_charger)
+ power_supply_changed(bdi->charger);
+ if (alert_battery)
+ power_supply_changed(bdi->battery);
out:
pm_runtime_put_sync(bdi->dev);
@@ -1300,6 +1262,10 @@ static int bq24190_hw_init(struct bq24190_dev_info *bdi)
goto out;
ret = bq24190_set_mode_host(bdi);
+ if (ret < 0)
+ goto out;
+
+ ret = bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
out:
pm_runtime_put_sync(bdi->dev);
return ret;
@@ -1375,10 +1341,8 @@ static int bq24190_probe(struct i2c_client *client,
bdi->model = id->driver_data;
strncpy(bdi->model_name, id->name, I2C_NAME_SIZE);
mutex_init(&bdi->f_reg_lock);
- bdi->first_time = true;
- bdi->charger_health_valid = false;
- bdi->battery_health_valid = false;
- bdi->battery_status_valid = false;
+ bdi->f_reg = 0;
+ bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
i2c_set_clientdata(client, bdi);
@@ -1392,22 +1356,13 @@ static int bq24190_probe(struct i2c_client *client,
return -EINVAL;
}
- ret = devm_request_threaded_irq(dev, bdi->irq, NULL,
- bq24190_irq_handler_thread,
- IRQF_TRIGGER_RISING | IRQF_ONESHOT,
- "bq24190-charger", bdi);
- if (ret < 0) {
- dev_err(dev, "Can't set up irq handler\n");
- goto out1;
- }
-
pm_runtime_enable(dev);
pm_runtime_resume(dev);
ret = bq24190_hw_init(bdi);
if (ret < 0) {
dev_err(dev, "Hardware init failed\n");
- goto out2;
+ goto out1;
}
charger_cfg.drv_data = bdi;
@@ -1418,7 +1373,7 @@ static int bq24190_probe(struct i2c_client *client,
if (IS_ERR(bdi->charger)) {
dev_err(dev, "Can't register charger\n");
ret = PTR_ERR(bdi->charger);
- goto out2;
+ goto out1;
}
battery_cfg.drv_data = bdi;
@@ -1427,27 +1382,39 @@ static int bq24190_probe(struct i2c_client *client,
if (IS_ERR(bdi->battery)) {
dev_err(dev, "Can't register battery\n");
ret = PTR_ERR(bdi->battery);
- goto out3;
+ goto out2;
}
ret = bq24190_sysfs_create_group(bdi);
if (ret) {
dev_err(dev, "Can't create sysfs entries\n");
+ goto out3;
+ }
+
+ ret = devm_request_threaded_irq(dev, bdi->irq, NULL,
+ bq24190_irq_handler_thread,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "bq24190-charger", bdi);
+ if (ret < 0) {
+ dev_err(dev, "Can't set up irq handler\n");
goto out4;
}
return 0;
out4:
- power_supply_unregister(bdi->battery);
+ bq24190_sysfs_remove_group(bdi);
+
out3:
- power_supply_unregister(bdi->charger);
+ power_supply_unregister(bdi->battery);
+
out2:
- pm_runtime_disable(dev);
+ power_supply_unregister(bdi->charger);
+
out1:
+ pm_runtime_disable(dev);
if (bdi->gpio_int)
gpio_free(bdi->gpio_int);
-
return ret;
}
@@ -1488,12 +1455,13 @@ static int bq24190_pm_resume(struct device *dev)
struct i2c_client *client = to_i2c_client(dev);
struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
- bdi->charger_health_valid = false;
- bdi->battery_health_valid = false;
- bdi->battery_status_valid = false;
+ bdi->f_reg = 0;
+ bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
pm_runtime_get_sync(bdi->dev);
bq24190_register_reset(bdi);
+ bq24190_set_mode_host(bdi);
+ bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
pm_runtime_put_sync(bdi->dev);
/* Things may have changed while suspended so alert upper layer */
diff --git a/drivers/power/supply/bq24735-charger.c b/drivers/power/supply/bq24735-charger.c
index eb7783b..eb01453 100644
--- a/drivers/power/supply/bq24735-charger.c
+++ b/drivers/power/supply/bq24735-charger.c
@@ -50,6 +50,8 @@ struct bq24735 {
struct bq24735_platform *pdata;
struct mutex lock;
struct gpio_desc *status_gpio;
+ struct delayed_work poll;
+ u32 poll_interval;
bool charging;
};
@@ -105,26 +107,6 @@ static int bq24735_update_word(struct i2c_client *client, u8 reg,
return bq24735_write_word(client, reg, tmp);
}
-static inline int bq24735_enable_charging(struct bq24735 *charger)
-{
- if (charger->pdata->ext_control)
- return 0;
-
- return bq24735_update_word(charger->client, BQ24735_CHG_OPT,
- BQ24735_CHG_OPT_CHARGE_DISABLE,
- ~BQ24735_CHG_OPT_CHARGE_DISABLE);
-}
-
-static inline int bq24735_disable_charging(struct bq24735 *charger)
-{
- if (charger->pdata->ext_control)
- return 0;
-
- return bq24735_update_word(charger->client, BQ24735_CHG_OPT,
- BQ24735_CHG_OPT_CHARGE_DISABLE,
- BQ24735_CHG_OPT_CHARGE_DISABLE);
-}
-
static int bq24735_config_charger(struct bq24735 *charger)
{
struct bq24735_platform *pdata = charger->pdata;
@@ -176,6 +158,31 @@ static int bq24735_config_charger(struct bq24735 *charger)
return 0;
}
+static inline int bq24735_enable_charging(struct bq24735 *charger)
+{
+ int ret;
+
+ if (charger->pdata->ext_control)
+ return 0;
+
+ ret = bq24735_config_charger(charger);
+ if (ret)
+ return ret;
+
+ return bq24735_update_word(charger->client, BQ24735_CHG_OPT,
+ BQ24735_CHG_OPT_CHARGE_DISABLE, 0);
+}
+
+static inline int bq24735_disable_charging(struct bq24735 *charger)
+{
+ if (charger->pdata->ext_control)
+ return 0;
+
+ return bq24735_update_word(charger->client, BQ24735_CHG_OPT,
+ BQ24735_CHG_OPT_CHARGE_DISABLE,
+ BQ24735_CHG_OPT_CHARGE_DISABLE);
+}
+
static bool bq24735_charger_is_present(struct bq24735 *charger)
{
if (charger->status_gpio) {
@@ -185,7 +192,7 @@ static bool bq24735_charger_is_present(struct bq24735 *charger)
ac = bq24735_read_word(charger->client, BQ24735_CHG_OPT);
if (ac < 0) {
- dev_err(&charger->client->dev,
+ dev_dbg(&charger->client->dev,
"Failed to read charger options : %d\n",
ac);
return false;
@@ -210,11 +217,8 @@ static int bq24735_charger_is_charging(struct bq24735 *charger)
return !(ret & BQ24735_CHG_OPT_CHARGE_DISABLE);
}
-static irqreturn_t bq24735_charger_isr(int irq, void *devid)
+static void bq24735_update(struct bq24735 *charger)
{
- struct power_supply *psy = devid;
- struct bq24735 *charger = to_bq24735(psy);
-
mutex_lock(&charger->lock);
if (charger->charging && bq24735_charger_is_present(charger))
@@ -224,11 +228,29 @@ static irqreturn_t bq24735_charger_isr(int irq, void *devid)
mutex_unlock(&charger->lock);
- power_supply_changed(psy);
+ power_supply_changed(charger->charger);
+}
+
+static irqreturn_t bq24735_charger_isr(int irq, void *devid)
+{
+ struct power_supply *psy = devid;
+ struct bq24735 *charger = to_bq24735(psy);
+
+ bq24735_update(charger);
return IRQ_HANDLED;
}
+static void bq24735_poll(struct work_struct *work)
+{
+ struct bq24735 *charger = container_of(work, struct bq24735, poll.work);
+
+ bq24735_update(charger);
+
+ schedule_delayed_work(&charger->poll,
+ msecs_to_jiffies(charger->poll_interval));
+}
+
static int bq24735_charger_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
@@ -276,7 +298,6 @@ static int bq24735_charger_set_property(struct power_supply *psy,
mutex_unlock(&charger->lock);
if (ret)
return ret;
- bq24735_config_charger(charger);
break;
case POWER_SUPPLY_STATUS_DISCHARGING:
case POWER_SUPPLY_STATUS_NOT_CHARGING:
@@ -395,7 +416,7 @@ static int bq24735_charger_probe(struct i2c_client *client,
return ret;
}
- if (!charger->status_gpio || bq24735_charger_is_present(charger)) {
+ if (bq24735_charger_is_present(charger)) {
ret = bq24735_read_word(client, BQ24735_MANUFACTURER_ID);
if (ret < 0) {
dev_err(&client->dev, "Failed to read manufacturer id : %d\n",
@@ -416,16 +437,7 @@ static int bq24735_charger_probe(struct i2c_client *client,
"device id mismatch. 0x000b != 0x%04x\n", ret);
return -ENODEV;
}
- }
- ret = bq24735_config_charger(charger);
- if (ret < 0) {
- dev_err(&client->dev, "failed in configuring charger");
- return ret;
- }
-
- /* check for AC adapter presence */
- if (bq24735_charger_is_present(charger)) {
ret = bq24735_enable_charging(charger);
if (ret < 0) {
dev_err(&client->dev, "Failed to enable charging\n");
@@ -456,11 +468,32 @@ static int bq24735_charger_probe(struct i2c_client *client,
client->irq, ret);
return ret;
}
+ } else {
+ ret = device_property_read_u32(&client->dev, "poll-interval",
+ &charger->poll_interval);
+ if (ret)
+ return 0;
+ if (!charger->poll_interval)
+ return 0;
+
+ INIT_DELAYED_WORK(&charger->poll, bq24735_poll);
+ schedule_delayed_work(&charger->poll,
+ msecs_to_jiffies(charger->poll_interval));
}
return 0;
}
+static int bq24735_charger_remove(struct i2c_client *client)
+{
+ struct bq24735 *charger = i2c_get_clientdata(client);
+
+ if (charger->poll_interval)
+ cancel_delayed_work_sync(&charger->poll);
+
+ return 0;
+}
+
static const struct i2c_device_id bq24735_charger_id[] = {
{ "bq24735-charger", 0 },
{}
@@ -479,6 +512,7 @@ static struct i2c_driver bq24735_charger_driver = {
.of_match_table = bq24735_match_ids,
},
.probe = bq24735_charger_probe,
+ .remove = bq24735_charger_remove,
.id_table = bq24735_charger_id,
};
diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index 08c36b8..398801a 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -22,8 +22,14 @@
* http://www.ti.com/product/bq27010
* http://www.ti.com/product/bq27210
* http://www.ti.com/product/bq27500
+ * http://www.ti.com/product/bq27510-g1
+ * http://www.ti.com/product/bq27510-g2
* http://www.ti.com/product/bq27510-g3
* http://www.ti.com/product/bq27520-g4
+ * http://www.ti.com/product/bq27520-g1
+ * http://www.ti.com/product/bq27520-g2
+ * http://www.ti.com/product/bq27520-g3
+ * http://www.ti.com/product/bq27520-g4
* http://www.ti.com/product/bq27530-g1
* http://www.ti.com/product/bq27531-g1
* http://www.ti.com/product/bq27541-g1
@@ -145,7 +151,7 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_DCAP] = 0x76,
[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
},
- [BQ27500] = {
+ [BQ2750X] = {
[BQ27XXX_REG_CTRL] = 0x00,
[BQ27XXX_REG_TEMP] = 0x06,
[BQ27XXX_REG_INT_TEMP] = 0x28,
@@ -164,7 +170,7 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_DCAP] = 0x3c,
[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
},
- [BQ27510] = {
+ [BQ2751X] = {
[BQ27XXX_REG_CTRL] = 0x00,
[BQ27XXX_REG_TEMP] = 0x06,
[BQ27XXX_REG_INT_TEMP] = 0x28,
@@ -183,6 +189,158 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_DCAP] = 0x2e,
[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
},
+ [BQ27500] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = 0x18,
+ [BQ27XXX_REG_TTES] = 0x1c,
+ [BQ27XXX_REG_TTECP] = 0x26,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x2a,
+ [BQ27XXX_REG_AE] = 0x22,
+ [BQ27XXX_REG_SOC] = 0x2c,
+ [BQ27XXX_REG_DCAP] = 0x3c,
+ [BQ27XXX_REG_AP] = 0x24,
+ },
+ [BQ27510G1] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = 0x18,
+ [BQ27XXX_REG_TTES] = 0x1c,
+ [BQ27XXX_REG_TTECP] = 0x26,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x2a,
+ [BQ27XXX_REG_AE] = 0x22,
+ [BQ27XXX_REG_SOC] = 0x2c,
+ [BQ27XXX_REG_DCAP] = 0x3c,
+ [BQ27XXX_REG_AP] = 0x24,
+ },
+ [BQ27510G2] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = 0x18,
+ [BQ27XXX_REG_TTES] = 0x1c,
+ [BQ27XXX_REG_TTECP] = 0x26,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x2a,
+ [BQ27XXX_REG_AE] = 0x22,
+ [BQ27XXX_REG_SOC] = 0x2c,
+ [BQ27XXX_REG_DCAP] = 0x3c,
+ [BQ27XXX_REG_AP] = 0x24,
+ },
+ [BQ27510G3] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = 0x28,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTES] = 0x1a,
+ [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x1e,
+ [BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_SOC] = 0x20,
+ [BQ27XXX_REG_DCAP] = 0x2e,
+ [BQ27XXX_REG_AP] = INVALID_REG_ADDR,
+ },
+ [BQ27520G1] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = 0x18,
+ [BQ27XXX_REG_TTES] = 0x1c,
+ [BQ27XXX_REG_TTECP] = 0x26,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_AE] = 0x22,
+ [BQ27XXX_REG_SOC] = 0x2c,
+ [BQ27XXX_REG_DCAP] = 0x3c,
+ [BQ27XXX_REG_AP] = 0x24,
+ },
+ [BQ27520G2] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = 0x36,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = 0x18,
+ [BQ27XXX_REG_TTES] = 0x1c,
+ [BQ27XXX_REG_TTECP] = 0x26,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x2a,
+ [BQ27XXX_REG_AE] = 0x22,
+ [BQ27XXX_REG_SOC] = 0x2c,
+ [BQ27XXX_REG_DCAP] = 0x3c,
+ [BQ27XXX_REG_AP] = 0x24,
+ },
+ [BQ27520G3] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = 0x36,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTES] = 0x1c,
+ [BQ27XXX_REG_TTECP] = 0x26,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x2a,
+ [BQ27XXX_REG_AE] = 0x22,
+ [BQ27XXX_REG_SOC] = 0x2c,
+ [BQ27XXX_REG_DCAP] = 0x3c,
+ [BQ27XXX_REG_AP] = 0x24,
+ },
+ [BQ27520G4] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = 0x28,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTES] = 0x1c,
+ [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x1e,
+ [BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_SOC] = 0x20,
+ [BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_AP] = INVALID_REG_ADDR,
+ },
[BQ27530] = {
[BQ27XXX_REG_CTRL] = 0x00,
[BQ27XXX_REG_TEMP] = 0x06,
@@ -303,7 +461,7 @@ static enum power_supply_property bq27010_battery_props[] = {
POWER_SUPPLY_PROP_MANUFACTURER,
};
-static enum power_supply_property bq27500_battery_props[] = {
+static enum power_supply_property bq2750x_battery_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -321,7 +479,7 @@ static enum power_supply_property bq27500_battery_props[] = {
POWER_SUPPLY_PROP_MANUFACTURER,
};
-static enum power_supply_property bq27510_battery_props[] = {
+static enum power_supply_property bq2751x_battery_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -339,6 +497,165 @@ static enum power_supply_property bq27510_battery_props[] = {
POWER_SUPPLY_PROP_MANUFACTURER,
};
+static enum power_supply_property bq27500_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_POWER_AVG,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq27510g1_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_POWER_AVG,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq27510g2_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_POWER_AVG,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq27510g3_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq27520g1_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_POWER_AVG,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq27520g2_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_POWER_AVG,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq27520g3_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_POWER_AVG,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq27520g4_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
static enum power_supply_property bq27530_battery_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_PRESENT,
@@ -421,8 +738,16 @@ static struct {
} bq27xxx_battery_props[] = {
BQ27XXX_PROP(BQ27000, bq27000_battery_props),
BQ27XXX_PROP(BQ27010, bq27010_battery_props),
+ BQ27XXX_PROP(BQ2750X, bq2750x_battery_props),
+ BQ27XXX_PROP(BQ2751X, bq2751x_battery_props),
BQ27XXX_PROP(BQ27500, bq27500_battery_props),
- BQ27XXX_PROP(BQ27510, bq27510_battery_props),
+ BQ27XXX_PROP(BQ27510G1, bq27510g1_battery_props),
+ BQ27XXX_PROP(BQ27510G2, bq27510g2_battery_props),
+ BQ27XXX_PROP(BQ27510G3, bq27510g3_battery_props),
+ BQ27XXX_PROP(BQ27520G1, bq27520g1_battery_props),
+ BQ27XXX_PROP(BQ27520G2, bq27520g2_battery_props),
+ BQ27XXX_PROP(BQ27520G3, bq27520g3_battery_props),
+ BQ27XXX_PROP(BQ27520G4, bq27520g4_battery_props),
BQ27XXX_PROP(BQ27530, bq27530_battery_props),
BQ27XXX_PROP(BQ27541, bq27541_battery_props),
BQ27XXX_PROP(BQ27545, bq27545_battery_props),
@@ -674,13 +999,26 @@ static int bq27xxx_battery_read_pwr_avg(struct bq27xxx_device_info *di)
*/
static bool bq27xxx_battery_overtemp(struct bq27xxx_device_info *di, u16 flags)
{
- if (di->chip == BQ27500 || di->chip == BQ27510 ||
- di->chip == BQ27541 || di->chip == BQ27545)
+ switch (di->chip) {
+ case BQ2750X:
+ case BQ2751X:
+ case BQ27500:
+ case BQ27510G1:
+ case BQ27510G2:
+ case BQ27510G3:
+ case BQ27520G1:
+ case BQ27520G2:
+ case BQ27520G3:
+ case BQ27520G4:
+ case BQ27541:
+ case BQ27545:
return flags & (BQ27XXX_FLAG_OTC | BQ27XXX_FLAG_OTD);
- if (di->chip == BQ27530 || di->chip == BQ27421)
+ case BQ27530:
+ case BQ27421:
return flags & BQ27XXX_FLAG_OT;
-
- return false;
+ default:
+ return false;
+ }
}
/*
diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
index 5c5c3a6..c68fbc3 100644
--- a/drivers/power/supply/bq27xxx_battery_i2c.c
+++ b/drivers/power/supply/bq27xxx_battery_i2c.c
@@ -148,9 +148,17 @@ static int bq27xxx_battery_i2c_remove(struct i2c_client *client)
static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
{ "bq27200", BQ27000 },
{ "bq27210", BQ27010 },
- { "bq27500", BQ27500 },
- { "bq27510", BQ27510 },
- { "bq27520", BQ27510 },
+ { "bq27500", BQ2750X },
+ { "bq27510", BQ2751X },
+ { "bq27520", BQ2751X },
+ { "bq27500-1", BQ27500 },
+ { "bq27510g1", BQ27510G1 },
+ { "bq27510g2", BQ27510G2 },
+ { "bq27510g3", BQ27510G3 },
+ { "bq27520g1", BQ27520G1 },
+ { "bq27520g2", BQ27520G2 },
+ { "bq27520g3", BQ27520G3 },
+ { "bq27520g4", BQ27520G4 },
{ "bq27530", BQ27530 },
{ "bq27531", BQ27530 },
{ "bq27541", BQ27541 },
@@ -173,6 +181,14 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
{ .compatible = "ti,bq27500" },
{ .compatible = "ti,bq27510" },
{ .compatible = "ti,bq27520" },
+ { .compatible = "ti,bq27500-1" },
+ { .compatible = "ti,bq27510g1" },
+ { .compatible = "ti,bq27510g2" },
+ { .compatible = "ti,bq27510g3" },
+ { .compatible = "ti,bq27520g1" },
+ { .compatible = "ti,bq27520g2" },
+ { .compatible = "ti,bq27520g3" },
+ { .compatible = "ti,bq27520g4" },
{ .compatible = "ti,bq27530" },
{ .compatible = "ti,bq27531" },
{ .compatible = "ti,bq27541" },
diff --git a/drivers/power/supply/gpio-charger.c b/drivers/power/supply/gpio-charger.c
index c5869b1..001731e 100644
--- a/drivers/power/supply/gpio-charger.c
+++ b/drivers/power/supply/gpio-charger.c
@@ -14,7 +14,7 @@
*/
#include <linux/device.h>
-#include <linux/gpio.h>
+#include <linux/gpio.h> /* For legacy platform data */
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
@@ -23,7 +23,7 @@
#include <linux/power_supply.h>
#include <linux/slab.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/power/gpio-charger.h>
@@ -34,6 +34,8 @@ struct gpio_charger {
struct power_supply *charger;
struct power_supply_desc charger_desc;
+ struct gpio_desc *gpiod;
+ bool legacy_gpio_requested;
};
static irqreturn_t gpio_charger_irq(int irq, void *devid)
@@ -58,7 +60,8 @@ static int gpio_charger_get_property(struct power_supply *psy,
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
- val->intval = !!gpio_get_value_cansleep(pdata->gpio);
+ val->intval = gpiod_get_value_cansleep(gpio_charger->gpiod);
+ /* This xor is only ever used with legacy pdata GPIO */
val->intval ^= pdata->gpio_active_low;
break;
default:
@@ -78,7 +81,6 @@ struct gpio_charger_platform_data *gpio_charger_parse_dt(struct device *dev)
struct device_node *np = dev->of_node;
struct gpio_charger_platform_data *pdata;
const char *chargetype;
- enum of_gpio_flags flags;
int ret;
if (!np)
@@ -89,16 +91,6 @@ struct gpio_charger_platform_data *gpio_charger_parse_dt(struct device *dev)
return ERR_PTR(-ENOMEM);
pdata->name = np->name;
-
- pdata->gpio = of_get_gpio_flags(np, 0, &flags);
- if (pdata->gpio < 0) {
- if (pdata->gpio != -EPROBE_DEFER)
- dev_err(dev, "could not get charger gpio\n");
- return ERR_PTR(pdata->gpio);
- }
-
- pdata->gpio_active_low = !!(flags & OF_GPIO_ACTIVE_LOW);
-
pdata->type = POWER_SUPPLY_TYPE_UNKNOWN;
ret = of_property_read_string(np, "charger-type", &chargetype);
if (ret >= 0) {
@@ -144,11 +136,6 @@ static int gpio_charger_probe(struct platform_device *pdev)
}
}
- if (!gpio_is_valid(pdata->gpio)) {
- dev_err(&pdev->dev, "Invalid gpio pin\n");
- return -EINVAL;
- }
-
gpio_charger = devm_kzalloc(&pdev->dev, sizeof(*gpio_charger),
GFP_KERNEL);
if (!gpio_charger) {
@@ -156,6 +143,45 @@ static int gpio_charger_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ /*
+ * This will fetch a GPIO descriptor from device tree, ACPI or
+ * boardfile descriptor tables. It's good to try this first.
+ */
+ gpio_charger->gpiod = devm_gpiod_get(&pdev->dev, NULL, GPIOD_IN);
+
+ /*
+ * If this fails and we're not using device tree, try the
+ * legacy platform data method.
+ */
+ if (IS_ERR(gpio_charger->gpiod) && !pdev->dev.of_node) {
+ /* Non-DT: use legacy GPIO numbers */
+ if (!gpio_is_valid(pdata->gpio)) {
+ dev_err(&pdev->dev, "Invalid gpio pin in pdata\n");
+ return -EINVAL;
+ }
+ ret = gpio_request(pdata->gpio, dev_name(&pdev->dev));
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request gpio pin: %d\n",
+ ret);
+ return ret;
+ }
+ gpio_charger->legacy_gpio_requested = true;
+ ret = gpio_direction_input(pdata->gpio);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to set gpio to input: %d\n",
+ ret);
+ goto err_gpio_free;
+ }
+ /* Then convert this to gpiod for now */
+ gpio_charger->gpiod = gpio_to_desc(pdata->gpio);
+ } else if (IS_ERR(gpio_charger->gpiod)) {
+ /* Just try again if this happens */
+ if (PTR_ERR(gpio_charger->gpiod) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ dev_err(&pdev->dev, "error getting GPIO descriptor\n");
+ return PTR_ERR(gpio_charger->gpiod);
+ }
+
charger_desc = &gpio_charger->charger_desc;
charger_desc->name = pdata->name ? pdata->name : "gpio-charger";
@@ -169,17 +195,6 @@ static int gpio_charger_probe(struct platform_device *pdev)
psy_cfg.of_node = pdev->dev.of_node;
psy_cfg.drv_data = gpio_charger;
- ret = gpio_request(pdata->gpio, dev_name(&pdev->dev));
- if (ret) {
- dev_err(&pdev->dev, "Failed to request gpio pin: %d\n", ret);
- goto err_free;
- }
- ret = gpio_direction_input(pdata->gpio);
- if (ret) {
- dev_err(&pdev->dev, "Failed to set gpio to input: %d\n", ret);
- goto err_gpio_free;
- }
-
gpio_charger->pdata = pdata;
gpio_charger->charger = power_supply_register(&pdev->dev,
@@ -191,7 +206,7 @@ static int gpio_charger_probe(struct platform_device *pdev)
goto err_gpio_free;
}
- irq = gpio_to_irq(pdata->gpio);
+ irq = gpiod_to_irq(gpio_charger->gpiod);
if (irq > 0) {
ret = request_any_context_irq(irq, gpio_charger_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
@@ -209,8 +224,8 @@ static int gpio_charger_probe(struct platform_device *pdev)
return 0;
err_gpio_free:
- gpio_free(pdata->gpio);
-err_free:
+ if (gpio_charger->legacy_gpio_requested)
+ gpio_free(pdata->gpio);
return ret;
}
@@ -223,7 +238,8 @@ static int gpio_charger_remove(struct platform_device *pdev)
power_supply_unregister(gpio_charger->charger);
- gpio_free(gpio_charger->pdata->gpio);
+ if (gpio_charger->legacy_gpio_requested)
+ gpio_free(gpio_charger->pdata->gpio);
return 0;
}
diff --git a/drivers/power/supply/intel_mid_battery.c b/drivers/power/supply/intel_mid_battery.c
deleted file mode 100644
index dc7feef..0000000
--- a/drivers/power/supply/intel_mid_battery.c
+++ /dev/null
@@ -1,795 +0,0 @@
-/*
- * intel_mid_battery.c - Intel MID PMIC Battery Driver
- *
- * Copyright (C) 2009 Intel Corporation
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- * Author: Nithish Mahalingam <nithish.mahalingam@intel.com>
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/workqueue.h>
-#include <linux/jiffies.h>
-#include <linux/param.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/platform_device.h>
-#include <linux/power_supply.h>
-
-#include <asm/intel_scu_ipc.h>
-
-#define DRIVER_NAME "pmic_battery"
-
-/*********************************************************************
- * Generic defines
- *********************************************************************/
-
-static int debug;
-module_param(debug, int, 0444);
-MODULE_PARM_DESC(debug, "Flag to enable PMIC Battery debug messages.");
-
-#define PMIC_BATT_DRV_INFO_UPDATED 1
-#define PMIC_BATT_PRESENT 1
-#define PMIC_BATT_NOT_PRESENT 0
-#define PMIC_USB_PRESENT PMIC_BATT_PRESENT
-#define PMIC_USB_NOT_PRESENT PMIC_BATT_NOT_PRESENT
-
-/* pmic battery register related */
-#define PMIC_BATT_CHR_SCHRGINT_ADDR 0xD2
-#define PMIC_BATT_CHR_SBATOVP_MASK (1 << 1)
-#define PMIC_BATT_CHR_STEMP_MASK (1 << 2)
-#define PMIC_BATT_CHR_SCOMP_MASK (1 << 3)
-#define PMIC_BATT_CHR_SUSBDET_MASK (1 << 4)
-#define PMIC_BATT_CHR_SBATDET_MASK (1 << 5)
-#define PMIC_BATT_CHR_SDCLMT_MASK (1 << 6)
-#define PMIC_BATT_CHR_SUSBOVP_MASK (1 << 7)
-#define PMIC_BATT_CHR_EXCPT_MASK 0x86
-
-#define PMIC_BATT_ADC_ACCCHRG_MASK (1 << 31)
-#define PMIC_BATT_ADC_ACCCHRGVAL_MASK 0x7FFFFFFF
-
-/* pmic ipc related */
-#define PMIC_BATT_CHR_IPC_FCHRG_SUBID 0x4
-#define PMIC_BATT_CHR_IPC_TCHRG_SUBID 0x6
-
-/* types of battery charging */
-enum batt_charge_type {
- BATT_USBOTG_500MA_CHARGE,
- BATT_USBOTG_TRICKLE_CHARGE,
-};
-
-/* valid battery events */
-enum batt_event {
- BATT_EVENT_BATOVP_EXCPT,
- BATT_EVENT_USBOVP_EXCPT,
- BATT_EVENT_TEMP_EXCPT,
- BATT_EVENT_DCLMT_EXCPT,
- BATT_EVENT_EXCPT
-};
-
-
-/*********************************************************************
- * Battery properties
- *********************************************************************/
-
-/*
- * pmic battery info
- */
-struct pmic_power_module_info {
- bool is_dev_info_updated;
- struct device *dev;
- /* pmic battery data */
- unsigned long update_time; /* jiffies when data read */
- unsigned int usb_is_present;
- unsigned int batt_is_present;
- unsigned int batt_health;
- unsigned int usb_health;
- unsigned int batt_status;
- unsigned int batt_charge_now; /* in mAS */
- unsigned int batt_prev_charge_full; /* in mAS */
- unsigned int batt_charge_rate; /* in units per second */
-
- struct power_supply *usb;
- struct power_supply *batt;
- int irq; /* GPE_ID or IRQ# */
- struct workqueue_struct *monitor_wqueue;
- struct delayed_work monitor_battery;
- struct work_struct handler;
-};
-
-static unsigned int delay_time = 2000; /* in ms */
-
-/*
- * pmic ac properties
- */
-static enum power_supply_property pmic_usb_props[] = {
- POWER_SUPPLY_PROP_PRESENT,
- POWER_SUPPLY_PROP_HEALTH,
-};
-
-/*
- * pmic battery properties
- */
-static enum power_supply_property pmic_battery_props[] = {
- POWER_SUPPLY_PROP_STATUS,
- POWER_SUPPLY_PROP_HEALTH,
- POWER_SUPPLY_PROP_PRESENT,
- POWER_SUPPLY_PROP_CHARGE_NOW,
- POWER_SUPPLY_PROP_CHARGE_FULL,
-};
-
-
-/*
- * Glue functions for talking to the IPC
- */
-
-struct battery_property {
- u32 capacity; /* Charger capacity */
- u8 crnt; /* Quick charge current value*/
- u8 volt; /* Fine adjustment of constant charge voltage */
- u8 prot; /* CHRGPROT register value */
- u8 prot2; /* CHRGPROT1 register value */
- u8 timer; /* Charging timer */
-};
-
-#define IPCMSG_BATTERY 0xEF
-
-/* Battery coulomb counter accumulator commands */
-#define IPC_CMD_CC_WR 0 /* Update coulomb counter value */
-#define IPC_CMD_CC_RD 1 /* Read coulomb counter value */
-#define IPC_CMD_BATTERY_PROPERTY 2 /* Read Battery property */
-
-/**
- * pmic_scu_ipc_battery_cc_read - read battery cc
- * @value: battery coulomb counter read
- *
- * Reads the battery couloumb counter value, returns 0 on success, or
- * an error code
- *
- * This function may sleep. Locking for SCU accesses is handled for
- * the caller.
- */
-static int pmic_scu_ipc_battery_cc_read(u32 *value)
-{
- return intel_scu_ipc_command(IPCMSG_BATTERY, IPC_CMD_CC_RD,
- NULL, 0, value, 1);
-}
-
-/**
- * pmic_scu_ipc_battery_property_get - fetch properties
- * @prop: battery properties
- *
- * Retrieve the battery properties from the power management
- *
- * This function may sleep. Locking for SCU accesses is handled for
- * the caller.
- */
-static int pmic_scu_ipc_battery_property_get(struct battery_property *prop)
-{
- u32 data[3];
- u8 *p = (u8 *)&data[1];
- int err = intel_scu_ipc_command(IPCMSG_BATTERY,
- IPC_CMD_BATTERY_PROPERTY, NULL, 0, data, 3);
-
- prop->capacity = data[0];
- prop->crnt = *p++;
- prop->volt = *p++;
- prop->prot = *p++;
- prop->prot2 = *p++;
- prop->timer = *p++;
-
- return err;
-}
-
-/**
- * pmic_scu_ipc_set_charger - set charger
- * @charger: charger to select
- *
- * Switch the charging mode for the SCU
- */
-
-static int pmic_scu_ipc_set_charger(int charger)
-{
- return intel_scu_ipc_simple_command(IPCMSG_BATTERY, charger);
-}
-
-/**
- * pmic_battery_log_event - log battery events
- * @event: battery event to be logged
- * Context: can sleep
- *
- * There are multiple battery events which may be of interest to users;
- * this battery function logs the different battery events onto the
- * kernel log messages.
- */
-static void pmic_battery_log_event(enum batt_event event)
-{
- printk(KERN_WARNING "pmic-battery: ");
- switch (event) {
- case BATT_EVENT_BATOVP_EXCPT:
- printk(KERN_CONT "battery overvoltage condition\n");
- break;
- case BATT_EVENT_USBOVP_EXCPT:
- printk(KERN_CONT "usb charger overvoltage condition\n");
- break;
- case BATT_EVENT_TEMP_EXCPT:
- printk(KERN_CONT "high battery temperature condition\n");
- break;
- case BATT_EVENT_DCLMT_EXCPT:
- printk(KERN_CONT "over battery charge current condition\n");
- break;
- default:
- printk(KERN_CONT "charger/battery exception %d\n", event);
- break;
- }
-}
-
-/**
- * pmic_battery_read_status - read battery status information
- * @pbi: device info structure to update the read information
- * Context: can sleep
- *
- * PMIC power source information need to be updated based on the data read
- * from the PMIC battery registers.
- *
- */
-static void pmic_battery_read_status(struct pmic_power_module_info *pbi)
-{
- unsigned int update_time_intrvl;
- unsigned int chrg_val;
- u32 ccval;
- u8 r8;
- struct battery_property batt_prop;
- int batt_present = 0;
- int usb_present = 0;
- int batt_exception = 0;
-
- /* make sure the last batt_status read happened delay_time before */
- if (pbi->update_time && time_before(jiffies, pbi->update_time +
- msecs_to_jiffies(delay_time)))
- return;
-
- update_time_intrvl = jiffies_to_msecs(jiffies - pbi->update_time);
- pbi->update_time = jiffies;
-
- /* read coulomb counter registers and schrgint register */
- if (pmic_scu_ipc_battery_cc_read(&ccval)) {
- dev_warn(pbi->dev, "%s(): ipc config cmd failed\n",
- __func__);
- return;
- }
-
- if (intel_scu_ipc_ioread8(PMIC_BATT_CHR_SCHRGINT_ADDR, &r8)) {
- dev_warn(pbi->dev, "%s(): ipc pmic read failed\n",
- __func__);
- return;
- }
-
- /*
- * set pmic_power_module_info members based on pmic register values
- * read.
- */
-
- /* set batt_is_present */
- if (r8 & PMIC_BATT_CHR_SBATDET_MASK) {
- pbi->batt_is_present = PMIC_BATT_PRESENT;
- batt_present = 1;
- } else {
- pbi->batt_is_present = PMIC_BATT_NOT_PRESENT;
- pbi->batt_health = POWER_SUPPLY_HEALTH_UNKNOWN;
- pbi->batt_status = POWER_SUPPLY_STATUS_UNKNOWN;
- }
-
- /* set batt_health */
- if (batt_present) {
- if (r8 & PMIC_BATT_CHR_SBATOVP_MASK) {
- pbi->batt_health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
- pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
- pmic_battery_log_event(BATT_EVENT_BATOVP_EXCPT);
- batt_exception = 1;
- } else if (r8 & PMIC_BATT_CHR_STEMP_MASK) {
- pbi->batt_health = POWER_SUPPLY_HEALTH_OVERHEAT;
- pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
- pmic_battery_log_event(BATT_EVENT_TEMP_EXCPT);
- batt_exception = 1;
- } else {
- pbi->batt_health = POWER_SUPPLY_HEALTH_GOOD;
- if (r8 & PMIC_BATT_CHR_SDCLMT_MASK) {
- /* PMIC will change charging current automatically */
- pmic_battery_log_event(BATT_EVENT_DCLMT_EXCPT);
- }
- }
- }
-
- /* set usb_is_present */
- if (r8 & PMIC_BATT_CHR_SUSBDET_MASK) {
- pbi->usb_is_present = PMIC_USB_PRESENT;
- usb_present = 1;
- } else {
- pbi->usb_is_present = PMIC_USB_NOT_PRESENT;
- pbi->usb_health = POWER_SUPPLY_HEALTH_UNKNOWN;
- }
-
- if (usb_present) {
- if (r8 & PMIC_BATT_CHR_SUSBOVP_MASK) {
- pbi->usb_health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
- pmic_battery_log_event(BATT_EVENT_USBOVP_EXCPT);
- } else {
- pbi->usb_health = POWER_SUPPLY_HEALTH_GOOD;
- }
- }
-
- chrg_val = ccval & PMIC_BATT_ADC_ACCCHRGVAL_MASK;
-
- /* set batt_prev_charge_full to battery capacity the first time */
- if (!pbi->is_dev_info_updated) {
- if (pmic_scu_ipc_battery_property_get(&batt_prop)) {
- dev_warn(pbi->dev, "%s(): ipc config cmd failed\n",
- __func__);
- return;
- }
- pbi->batt_prev_charge_full = batt_prop.capacity;
- }
-
- /* set batt_status */
- if (batt_present && !batt_exception) {
- if (r8 & PMIC_BATT_CHR_SCOMP_MASK) {
- pbi->batt_status = POWER_SUPPLY_STATUS_FULL;
- pbi->batt_prev_charge_full = chrg_val;
- } else if (ccval & PMIC_BATT_ADC_ACCCHRG_MASK) {
- pbi->batt_status = POWER_SUPPLY_STATUS_DISCHARGING;
- } else {
- pbi->batt_status = POWER_SUPPLY_STATUS_CHARGING;
- }
- }
-
- /* set batt_charge_rate */
- if (pbi->is_dev_info_updated && batt_present && !batt_exception) {
- if (pbi->batt_status == POWER_SUPPLY_STATUS_DISCHARGING) {
- if (pbi->batt_charge_now - chrg_val) {
- pbi->batt_charge_rate = ((pbi->batt_charge_now -
- chrg_val) * 1000 * 60) /
- update_time_intrvl;
- }
- } else if (pbi->batt_status == POWER_SUPPLY_STATUS_CHARGING) {
- if (chrg_val - pbi->batt_charge_now) {
- pbi->batt_charge_rate = ((chrg_val -
- pbi->batt_charge_now) * 1000 * 60) /
- update_time_intrvl;
- }
- } else
- pbi->batt_charge_rate = 0;
- } else {
- pbi->batt_charge_rate = -1;
- }
-
- /* batt_charge_now */
- if (batt_present && !batt_exception)
- pbi->batt_charge_now = chrg_val;
- else
- pbi->batt_charge_now = -1;
-
- pbi->is_dev_info_updated = PMIC_BATT_DRV_INFO_UPDATED;
-}
-
-/**
- * pmic_usb_get_property - usb power source get property
- * @psy: usb power supply context
- * @psp: usb power source property
- * @val: usb power source property value
- * Context: can sleep
- *
- * PMIC usb power source property needs to be provided to power_supply
- * subsytem for it to provide the information to users.
- */
-static int pmic_usb_get_property(struct power_supply *psy,
- enum power_supply_property psp,
- union power_supply_propval *val)
-{
- struct pmic_power_module_info *pbi = power_supply_get_drvdata(psy);
-
- /* update pmic_power_module_info members */
- pmic_battery_read_status(pbi);
-
- switch (psp) {
- case POWER_SUPPLY_PROP_PRESENT:
- val->intval = pbi->usb_is_present;
- break;
- case POWER_SUPPLY_PROP_HEALTH:
- val->intval = pbi->usb_health;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static inline unsigned long mAStouAh(unsigned long v)
-{
- /* seconds to hours, mA to µA */
- return (v * 1000) / 3600;
-}
-
-/**
- * pmic_battery_get_property - battery power source get property
- * @psy: battery power supply context
- * @psp: battery power source property
- * @val: battery power source property value
- * Context: can sleep
- *
- * PMIC battery power source property needs to be provided to power_supply
- * subsytem for it to provide the information to users.
- */
-static int pmic_battery_get_property(struct power_supply *psy,
- enum power_supply_property psp,
- union power_supply_propval *val)
-{
- struct pmic_power_module_info *pbi = power_supply_get_drvdata(psy);
-
- /* update pmic_power_module_info members */
- pmic_battery_read_status(pbi);
-
- switch (psp) {
- case POWER_SUPPLY_PROP_STATUS:
- val->intval = pbi->batt_status;
- break;
- case POWER_SUPPLY_PROP_HEALTH:
- val->intval = pbi->batt_health;
- break;
- case POWER_SUPPLY_PROP_PRESENT:
- val->intval = pbi->batt_is_present;
- break;
- case POWER_SUPPLY_PROP_CHARGE_NOW:
- val->intval = mAStouAh(pbi->batt_charge_now);
- break;
- case POWER_SUPPLY_PROP_CHARGE_FULL:
- val->intval = mAStouAh(pbi->batt_prev_charge_full);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-/**
- * pmic_battery_monitor - monitor battery status
- * @work: work structure
- * Context: can sleep
- *
- * PMIC battery status needs to be monitored for any change
- * and information needs to be frequently updated.
- */
-static void pmic_battery_monitor(struct work_struct *work)
-{
- struct pmic_power_module_info *pbi = container_of(work,
- struct pmic_power_module_info, monitor_battery.work);
-
- /* update pmic_power_module_info members */
- pmic_battery_read_status(pbi);
- queue_delayed_work(pbi->monitor_wqueue, &pbi->monitor_battery, HZ * 10);
-}
-
-/**
- * pmic_battery_set_charger - set battery charger
- * @pbi: device info structure
- * @chrg: charge mode to set battery charger in
- * Context: can sleep
- *
- * PMIC battery charger needs to be enabled based on the usb charge
- * capabilities connected to the platform.
- */
-static int pmic_battery_set_charger(struct pmic_power_module_info *pbi,
- enum batt_charge_type chrg)
-{
- int retval;
-
- /* set usblmt bits and chrgcntl register bits appropriately */
- switch (chrg) {
- case BATT_USBOTG_500MA_CHARGE:
- retval = pmic_scu_ipc_set_charger(PMIC_BATT_CHR_IPC_FCHRG_SUBID);
- break;
- case BATT_USBOTG_TRICKLE_CHARGE:
- retval = pmic_scu_ipc_set_charger(PMIC_BATT_CHR_IPC_TCHRG_SUBID);
- break;
- default:
- dev_warn(pbi->dev, "%s(): out of range usb charger "
- "charge detected\n", __func__);
- return -EINVAL;
- }
-
- if (retval) {
- dev_warn(pbi->dev, "%s(): ipc pmic read failed\n",
- __func__);
- return retval;
- }
-
- return 0;
-}
-
-/**
- * pmic_battery_interrupt_handler - pmic battery interrupt handler
- * Context: interrupt context
- *
- * PMIC battery interrupt handler which will be called with either
- * battery full condition occurs or usb otg & battery connect
- * condition occurs.
- */
-static irqreturn_t pmic_battery_interrupt_handler(int id, void *dev)
-{
- struct pmic_power_module_info *pbi = dev;
-
- schedule_work(&pbi->handler);
-
- return IRQ_HANDLED;
-}
-
-/**
- * pmic_battery_handle_intrpt - pmic battery service interrupt
- * @work: work structure
- * Context: can sleep
- *
- * PMIC battery needs to either update the battery status as full
- * if it detects battery full condition caused the interrupt or needs
- * to enable battery charger if it detects usb and battery detect
- * caused the source of interrupt.
- */
-static void pmic_battery_handle_intrpt(struct work_struct *work)
-{
- struct pmic_power_module_info *pbi = container_of(work,
- struct pmic_power_module_info, handler);
- enum batt_charge_type chrg;
- u8 r8;
-
- if (intel_scu_ipc_ioread8(PMIC_BATT_CHR_SCHRGINT_ADDR, &r8)) {
- dev_warn(pbi->dev, "%s(): ipc pmic read failed\n",
- __func__);
- return;
- }
- /* find the cause of the interrupt */
- if (r8 & PMIC_BATT_CHR_SBATDET_MASK) {
- pbi->batt_is_present = PMIC_BATT_PRESENT;
- } else {
- pbi->batt_is_present = PMIC_BATT_NOT_PRESENT;
- pbi->batt_health = POWER_SUPPLY_HEALTH_UNKNOWN;
- pbi->batt_status = POWER_SUPPLY_STATUS_UNKNOWN;
- return;
- }
-
- if (r8 & PMIC_BATT_CHR_EXCPT_MASK) {
- pbi->batt_health = POWER_SUPPLY_HEALTH_UNKNOWN;
- pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
- pbi->usb_health = POWER_SUPPLY_HEALTH_UNKNOWN;
- pmic_battery_log_event(BATT_EVENT_EXCPT);
- return;
- } else {
- pbi->batt_health = POWER_SUPPLY_HEALTH_GOOD;
- pbi->usb_health = POWER_SUPPLY_HEALTH_GOOD;
- }
-
- if (r8 & PMIC_BATT_CHR_SCOMP_MASK) {
- u32 ccval;
- pbi->batt_status = POWER_SUPPLY_STATUS_FULL;
-
- if (pmic_scu_ipc_battery_cc_read(&ccval)) {
- dev_warn(pbi->dev, "%s(): ipc config cmd "
- "failed\n", __func__);
- return;
- }
- pbi->batt_prev_charge_full = ccval &
- PMIC_BATT_ADC_ACCCHRGVAL_MASK;
- return;
- }
-
- if (r8 & PMIC_BATT_CHR_SUSBDET_MASK) {
- pbi->usb_is_present = PMIC_USB_PRESENT;
- } else {
- pbi->usb_is_present = PMIC_USB_NOT_PRESENT;
- pbi->usb_health = POWER_SUPPLY_HEALTH_UNKNOWN;
- return;
- }
-
- /* setup battery charging */
-
-#if 0
- /* check usb otg power capability and set charger accordingly */
- retval = langwell_udc_maxpower(&power);
- if (retval) {
- dev_warn(pbi->dev,
- "%s(): usb otg power query failed with error code %d\n",
- __func__, retval);
- return;
- }
-
- if (power >= 500)
- chrg = BATT_USBOTG_500MA_CHARGE;
- else
-#endif
- chrg = BATT_USBOTG_TRICKLE_CHARGE;
-
- /* enable battery charging */
- if (pmic_battery_set_charger(pbi, chrg)) {
- dev_warn(pbi->dev,
- "%s(): failed to set up battery charging\n", __func__);
- return;
- }
-
- dev_dbg(pbi->dev,
- "pmic-battery: %s() - setting up battery charger successful\n",
- __func__);
-}
-
-/*
- * Description of power supplies
- */
-static const struct power_supply_desc pmic_usb_desc = {
- .name = "pmic-usb",
- .type = POWER_SUPPLY_TYPE_USB,
- .properties = pmic_usb_props,
- .num_properties = ARRAY_SIZE(pmic_usb_props),
- .get_property = pmic_usb_get_property,
-};
-
-static const struct power_supply_desc pmic_batt_desc = {
- .name = "pmic-batt",
- .type = POWER_SUPPLY_TYPE_BATTERY,
- .properties = pmic_battery_props,
- .num_properties = ARRAY_SIZE(pmic_battery_props),
- .get_property = pmic_battery_get_property,
-};
-
-/**
- * pmic_battery_probe - pmic battery initialize
- * @irq: pmic battery device irq
- * @dev: pmic battery device structure
- * Context: can sleep
- *
- * PMIC battery initializes its internal data structue and other
- * infrastructure components for it to work as expected.
- */
-static int probe(int irq, struct device *dev)
-{
- int retval = 0;
- struct pmic_power_module_info *pbi;
- struct power_supply_config psy_cfg = {};
-
- dev_dbg(dev, "pmic-battery: found pmic battery device\n");
-
- pbi = kzalloc(sizeof(*pbi), GFP_KERNEL);
- if (!pbi) {
- dev_err(dev, "%s(): memory allocation failed\n",
- __func__);
- return -ENOMEM;
- }
-
- pbi->dev = dev;
- pbi->irq = irq;
- dev_set_drvdata(dev, pbi);
- psy_cfg.drv_data = pbi;
-
- /* initialize all required framework before enabling interrupts */
- INIT_WORK(&pbi->handler, pmic_battery_handle_intrpt);
- INIT_DELAYED_WORK(&pbi->monitor_battery, pmic_battery_monitor);
- pbi->monitor_wqueue = alloc_workqueue(dev_name(dev), WQ_MEM_RECLAIM, 0);
- if (!pbi->monitor_wqueue) {
- dev_err(dev, "%s(): wqueue init failed\n", __func__);
- retval = -ESRCH;
- goto wqueue_failed;
- }
-
- /* register interrupt */
- retval = request_irq(pbi->irq, pmic_battery_interrupt_handler,
- 0, DRIVER_NAME, pbi);
- if (retval) {
- dev_err(dev, "%s(): cannot get IRQ\n", __func__);
- goto requestirq_failed;
- }
-
- /* register pmic-batt with power supply subsystem */
- pbi->batt = power_supply_register(dev, &pmic_usb_desc, &psy_cfg);
- if (IS_ERR(pbi->batt)) {
- dev_err(dev,
- "%s(): failed to register pmic battery device with power supply subsystem\n",
- __func__);
- retval = PTR_ERR(pbi->batt);
- goto power_reg_failed;
- }
-
- dev_dbg(dev, "pmic-battery: %s() - pmic battery device "
- "registration with power supply subsystem successful\n",
- __func__);
-
- queue_delayed_work(pbi->monitor_wqueue, &pbi->monitor_battery, HZ * 1);
-
- /* register pmic-usb with power supply subsystem */
- pbi->usb = power_supply_register(dev, &pmic_batt_desc, &psy_cfg);
- if (IS_ERR(pbi->usb)) {
- dev_err(dev,
- "%s(): failed to register pmic usb device with power supply subsystem\n",
- __func__);
- retval = PTR_ERR(pbi->usb);
- goto power_reg_failed_1;
- }
-
- if (debug)
- printk(KERN_INFO "pmic-battery: %s() - pmic usb device "
- "registration with power supply subsystem successful\n",
- __func__);
-
- return retval;
-
-power_reg_failed_1:
- power_supply_unregister(pbi->batt);
-power_reg_failed:
- cancel_delayed_work_sync(&pbi->monitor_battery);
-requestirq_failed:
- destroy_workqueue(pbi->monitor_wqueue);
-wqueue_failed:
- kfree(pbi);
-
- return retval;
-}
-
-static int platform_pmic_battery_probe(struct platform_device *pdev)
-{
- return probe(pdev->id, &pdev->dev);
-}
-
-/**
- * pmic_battery_remove - pmic battery finalize
- * @dev: pmic battery device structure
- * Context: can sleep
- *
- * PMIC battery finalizes its internal data structue and other
- * infrastructure components that it initialized in
- * pmic_battery_probe.
- */
-
-static int platform_pmic_battery_remove(struct platform_device *pdev)
-{
- struct pmic_power_module_info *pbi = platform_get_drvdata(pdev);
-
- free_irq(pbi->irq, pbi);
- cancel_delayed_work_sync(&pbi->monitor_battery);
- destroy_workqueue(pbi->monitor_wqueue);
-
- power_supply_unregister(pbi->usb);
- power_supply_unregister(pbi->batt);
-
- cancel_work_sync(&pbi->handler);
- kfree(pbi);
- return 0;
-}
-
-static struct platform_driver platform_pmic_battery_driver = {
- .driver = {
- .name = DRIVER_NAME,
- },
- .probe = platform_pmic_battery_probe,
- .remove = platform_pmic_battery_remove,
-};
-
-module_platform_driver(platform_pmic_battery_driver);
-
-MODULE_AUTHOR("Nithish Mahalingam <nithish.mahalingam@intel.com>");
-MODULE_DESCRIPTION("Intel Moorestown PMIC Battery Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/max14656_charger_detector.c b/drivers/power/supply/max14656_charger_detector.c
new file mode 100644
index 0000000..b91b1d2
--- /dev/null
+++ b/drivers/power/supply/max14656_charger_detector.c
@@ -0,0 +1,327 @@
+/*
+ * Maxim MAX14656 / AL32 USB Charger Detector driver
+ *
+ * Copyright (C) 2014 LG Electronics, Inc
+ * Copyright (C) 2016 Alexander Kurz <akurz@blala.de>
+ *
+ * Components from Maxim AL32 Charger detection Driver for MX50 Yoshi Board
+ * Copyright (C) Amazon Technologies Inc. All rights reserved.
+ * Manish Lachwani (lachwani@lab126.com)
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/of_device.h>
+#include <linux/workqueue.h>
+#include <linux/power_supply.h>
+
+#define MAX14656_MANUFACTURER "Maxim Integrated"
+#define MAX14656_NAME "max14656"
+
+#define MAX14656_DEVICE_ID 0x00
+#define MAX14656_INTERRUPT_1 0x01
+#define MAX14656_INTERRUPT_2 0x02
+#define MAX14656_STATUS_1 0x03
+#define MAX14656_STATUS_2 0x04
+#define MAX14656_INTMASK_1 0x05
+#define MAX14656_INTMASK_2 0x06
+#define MAX14656_CONTROL_1 0x07
+#define MAX14656_CONTROL_2 0x08
+#define MAX14656_CONTROL_3 0x09
+
+#define DEVICE_VENDOR_MASK 0xf0
+#define DEVICE_REV_MASK 0x0f
+#define INT_EN_REG_MASK BIT(4)
+#define CHG_TYPE_INT_MASK BIT(0)
+#define STATUS1_VB_VALID_MASK BIT(4)
+#define STATUS1_CHG_TYPE_MASK 0xf
+#define INT1_DCD_TIMEOUT_MASK BIT(7)
+#define CONTROL1_DEFAULT 0x0d
+#define CONTROL1_INT_EN BIT(4)
+#define CONTROL1_INT_ACTIVE_HIGH BIT(5)
+#define CONTROL1_EDGE BIT(7)
+#define CONTROL2_DEFAULT 0x8e
+#define CONTROL2_ADC_EN BIT(0)
+#define CONTROL3_DEFAULT 0x8d
+
+enum max14656_chg_type {
+ MAX14656_NO_CHARGER = 0,
+ MAX14656_SDP_CHARGER,
+ MAX14656_CDP_CHARGER,
+ MAX14656_DCP_CHARGER,
+ MAX14656_APPLE_500MA_CHARGER,
+ MAX14656_APPLE_1A_CHARGER,
+ MAX14656_APPLE_2A_CHARGER,
+ MAX14656_SPECIAL_500MA_CHARGER,
+ MAX14656_APPLE_12W,
+ MAX14656_CHARGER_LAST
+};
+
+static const struct max14656_chg_type_props {
+ enum power_supply_type type;
+} chg_type_props[] = {
+ { POWER_SUPPLY_TYPE_UNKNOWN },
+ { POWER_SUPPLY_TYPE_USB },
+ { POWER_SUPPLY_TYPE_USB_CDP },
+ { POWER_SUPPLY_TYPE_USB_DCP },
+ { POWER_SUPPLY_TYPE_USB_DCP },
+ { POWER_SUPPLY_TYPE_USB_DCP },
+ { POWER_SUPPLY_TYPE_USB_DCP },
+ { POWER_SUPPLY_TYPE_USB_DCP },
+ { POWER_SUPPLY_TYPE_USB },
+};
+
+struct max14656_chip {
+ struct i2c_client *client;
+ struct power_supply *detect_psy;
+ struct power_supply_desc psy_desc;
+ struct delayed_work irq_work;
+
+ int irq;
+ int online;
+};
+
+static int max14656_read_reg(struct i2c_client *client, int reg, u8 *val)
+{
+ s32 ret;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "i2c read fail: can't read from %02x: %d\n",
+ reg, ret);
+ return ret;
+ }
+ *val = ret;
+ return 0;
+}
+
+static int max14656_write_reg(struct i2c_client *client, int reg, u8 val)
+{
+ s32 ret;
+
+ ret = i2c_smbus_write_byte_data(client, reg, val);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "i2c write fail: can't write %02x to %02x: %d\n",
+ val, reg, ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int max14656_read_block_reg(struct i2c_client *client, u8 reg,
+ u8 length, u8 *val)
+{
+ int ret;
+
+ ret = i2c_smbus_read_i2c_block_data(client, reg, length, val);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to block read reg 0x%x: %d\n",
+ reg, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+#define REG_TOTAL_NUM 5
+static void max14656_irq_worker(struct work_struct *work)
+{
+ struct max14656_chip *chip =
+ container_of(work, struct max14656_chip, irq_work.work);
+
+ u8 buf[REG_TOTAL_NUM];
+ u8 chg_type;
+ int ret = 0;
+
+ ret = max14656_read_block_reg(chip->client, MAX14656_DEVICE_ID,
+ REG_TOTAL_NUM, buf);
+
+ if ((buf[MAX14656_STATUS_1] & STATUS1_VB_VALID_MASK) &&
+ (buf[MAX14656_STATUS_1] & STATUS1_CHG_TYPE_MASK)) {
+ chg_type = buf[MAX14656_STATUS_1] & STATUS1_CHG_TYPE_MASK;
+ if (chg_type < MAX14656_CHARGER_LAST)
+ chip->psy_desc.type = chg_type_props[chg_type].type;
+ else
+ chip->psy_desc.type = POWER_SUPPLY_TYPE_UNKNOWN;
+ chip->online = 1;
+ } else {
+ chip->online = 0;
+ chip->psy_desc.type = POWER_SUPPLY_TYPE_UNKNOWN;
+ }
+
+ power_supply_changed(chip->detect_psy);
+}
+
+static irqreturn_t max14656_irq(int irq, void *dev_id)
+{
+ struct max14656_chip *chip = dev_id;
+
+ schedule_delayed_work(&chip->irq_work, msecs_to_jiffies(100));
+
+ return IRQ_HANDLED;
+}
+
+static int max14656_hw_init(struct max14656_chip *chip)
+{
+ uint8_t val = 0;
+ uint8_t rev;
+ struct i2c_client *client = chip->client;
+
+ if (max14656_read_reg(client, MAX14656_DEVICE_ID, &val))
+ return -ENODEV;
+
+ if ((val & DEVICE_VENDOR_MASK) != 0x20) {
+ dev_err(&client->dev, "wrong vendor ID %d\n",
+ ((val & DEVICE_VENDOR_MASK) >> 4));
+ return -ENODEV;
+ }
+ rev = val & DEVICE_REV_MASK;
+
+ /* Turn on ADC_EN */
+ if (max14656_write_reg(client, MAX14656_CONTROL_2, CONTROL2_ADC_EN))
+ return -EINVAL;
+
+ /* turn on interrupts and low power mode */
+ if (max14656_write_reg(client, MAX14656_CONTROL_1,
+ CONTROL1_DEFAULT |
+ CONTROL1_INT_EN |
+ CONTROL1_INT_ACTIVE_HIGH |
+ CONTROL1_EDGE))
+ return -EINVAL;
+
+ if (max14656_write_reg(client, MAX14656_INTMASK_1, 0x3))
+ return -EINVAL;
+
+ if (max14656_write_reg(client, MAX14656_INTMASK_2, 0x1))
+ return -EINVAL;
+
+ dev_info(&client->dev, "detected revision %d\n", rev);
+ return 0;
+}
+
+static int max14656_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max14656_chip *chip = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = chip->online;
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = MAX14656_NAME;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = MAX14656_MANUFACTURER;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static enum power_supply_property max14656_battery_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static int max14656_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+ struct device *dev = &client->dev;
+ struct power_supply_config psy_cfg = {};
+ struct max14656_chip *chip;
+ int irq = client->irq;
+ int ret = 0;
+
+ if (irq <= 0) {
+ dev_err(dev, "invalid irq number: %d\n", irq);
+ return -ENODEV;
+ }
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
+ return -ENODEV;
+ }
+
+ chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ psy_cfg.drv_data = chip;
+ chip->client = client;
+ chip->online = 0;
+ chip->psy_desc.name = MAX14656_NAME;
+ chip->psy_desc.type = POWER_SUPPLY_TYPE_UNKNOWN;
+ chip->psy_desc.properties = max14656_battery_props;
+ chip->psy_desc.num_properties = ARRAY_SIZE(max14656_battery_props);
+ chip->psy_desc.get_property = max14656_get_property;
+ chip->irq = irq;
+
+ ret = max14656_hw_init(chip);
+ if (ret)
+ return -ENODEV;
+
+ INIT_DELAYED_WORK(&chip->irq_work, max14656_irq_worker);
+
+ ret = devm_request_irq(dev, chip->irq, max14656_irq,
+ IRQF_TRIGGER_FALLING,
+ MAX14656_NAME, chip);
+ if (ret) {
+ dev_err(dev, "request_irq %d failed\n", chip->irq);
+ return -EINVAL;
+ }
+ enable_irq_wake(chip->irq);
+
+ chip->detect_psy = devm_power_supply_register(dev,
+ &chip->psy_desc, &psy_cfg);
+ if (IS_ERR(chip->detect_psy)) {
+ dev_err(dev, "power_supply_register failed\n");
+ return -EINVAL;
+ }
+
+ schedule_delayed_work(&chip->irq_work, msecs_to_jiffies(2000));
+
+ return 0;
+}
+
+static const struct i2c_device_id max14656_id[] = {
+ { "max14656", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, max14656_id);
+
+static const struct of_device_id max14656_match_table[] = {
+ { .compatible = "maxim,max14656", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, max14656_match_table);
+
+static struct i2c_driver max14656_i2c_driver = {
+ .driver = {
+ .name = "max14656",
+ .of_match_table = max14656_match_table,
+ },
+ .probe = max14656_probe,
+ .id_table = max14656_id,
+};
+module_i2c_driver(max14656_i2c_driver);
+
+MODULE_DESCRIPTION("MAX14656 USB charger detector");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/max8997_charger.c b/drivers/power/supply/max8997_charger.c
index 290ddc1..fa86100 100644
--- a/drivers/power/supply/max8997_charger.c
+++ b/drivers/power/supply/max8997_charger.c
@@ -148,10 +148,8 @@ static int max8997_battery_probe(struct platform_device *pdev)
charger = devm_kzalloc(&pdev->dev, sizeof(struct charger_data),
GFP_KERNEL);
- if (charger == NULL) {
- dev_err(&pdev->dev, "Cannot allocate memory.\n");
+ if (!charger)
return -ENOMEM;
- }
platform_set_drvdata(pdev, charger);
@@ -161,7 +159,7 @@ static int max8997_battery_probe(struct platform_device *pdev)
psy_cfg.drv_data = charger;
- charger->battery = power_supply_register(&pdev->dev,
+ charger->battery = devm_power_supply_register(&pdev->dev,
&max8997_battery_desc,
&psy_cfg);
if (IS_ERR(charger->battery)) {
@@ -172,14 +170,6 @@ static int max8997_battery_probe(struct platform_device *pdev)
return 0;
}
-static int max8997_battery_remove(struct platform_device *pdev)
-{
- struct charger_data *charger = platform_get_drvdata(pdev);
-
- power_supply_unregister(charger->battery);
- return 0;
-}
-
static const struct platform_device_id max8997_battery_id[] = {
{ "max8997-battery", 0 },
{ }
@@ -191,7 +181,6 @@ static struct platform_driver max8997_battery_driver = {
.name = "max8997-battery",
},
.probe = max8997_battery_probe,
- .remove = max8997_battery_remove,
.id_table = max8997_battery_id,
};
diff --git a/drivers/power/supply/pcf50633-charger.c b/drivers/power/supply/pcf50633-charger.c
index d05597b..b3c1873 100644
--- a/drivers/power/supply/pcf50633-charger.c
+++ b/drivers/power/supply/pcf50633-charger.c
@@ -393,7 +393,6 @@ static int pcf50633_mbc_probe(struct platform_device *pdev)
{
struct power_supply_config psy_cfg = {};
struct pcf50633_mbc *mbc;
- int ret;
int i;
u8 mbcs1;
@@ -419,8 +418,7 @@ static int pcf50633_mbc_probe(struct platform_device *pdev)
&psy_cfg);
if (IS_ERR(mbc->adapter)) {
dev_err(mbc->pcf->dev, "failed to register adapter\n");
- ret = PTR_ERR(mbc->adapter);
- return ret;
+ return PTR_ERR(mbc->adapter);
}
mbc->usb = power_supply_register(&pdev->dev, &pcf50633_mbc_usb_desc,
@@ -428,8 +426,7 @@ static int pcf50633_mbc_probe(struct platform_device *pdev)
if (IS_ERR(mbc->usb)) {
dev_err(mbc->pcf->dev, "failed to register usb\n");
power_supply_unregister(mbc->adapter);
- ret = PTR_ERR(mbc->usb);
- return ret;
+ return PTR_ERR(mbc->usb);
}
mbc->ac = power_supply_register(&pdev->dev, &pcf50633_mbc_ac_desc,
@@ -438,12 +435,10 @@ static int pcf50633_mbc_probe(struct platform_device *pdev)
dev_err(mbc->pcf->dev, "failed to register ac\n");
power_supply_unregister(mbc->adapter);
power_supply_unregister(mbc->usb);
- ret = PTR_ERR(mbc->ac);
- return ret;
+ return PTR_ERR(mbc->ac);
}
- ret = sysfs_create_group(&pdev->dev.kobj, &mbc_attr_group);
- if (ret)
+ if (sysfs_create_group(&pdev->dev.kobj, &mbc_attr_group))
dev_err(mbc->pcf->dev, "failed to create sysfs entries\n");
mbcs1 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS1);
diff --git a/drivers/power/supply/qcom_smbb.c b/drivers/power/supply/qcom_smbb.c
index b5896ba..f6a0d245 100644
--- a/drivers/power/supply/qcom_smbb.c
+++ b/drivers/power/supply/qcom_smbb.c
@@ -35,6 +35,7 @@
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/extcon.h>
+#include <linux/regulator/driver.h>
#define SMBB_CHG_VMAX 0x040
#define SMBB_CHG_VSAFE 0x041
@@ -72,6 +73,8 @@
#define BTC_CTRL_HOT_EXT_N BIT(0)
#define SMBB_USB_IMAX 0x344
+#define SMBB_USB_OTG_CTL 0x348
+#define OTG_CTL_EN BIT(0)
#define SMBB_USB_ENUM_TIMER_STOP 0x34e
#define ENUM_TIMER_STOP BIT(0)
#define SMBB_USB_SEC_ACCESS 0x3d0
@@ -125,6 +128,9 @@ struct smbb_charger {
struct power_supply *dc_psy;
struct power_supply *bat_psy;
struct regmap *regmap;
+
+ struct regulator_desc otg_rdesc;
+ struct regulator_dev *otg_reg;
};
static const unsigned int smbb_usb_extcon_cable[] = {
@@ -378,7 +384,7 @@ static irqreturn_t smbb_usb_valid_handler(int irq, void *_data)
struct smbb_charger *chg = _data;
smbb_set_line_flag(chg, irq, STATUS_USBIN_VALID);
- extcon_set_cable_state_(chg->edev, EXTCON_USB,
+ extcon_set_state_sync(chg->edev, EXTCON_USB,
chg->status & STATUS_USBIN_VALID);
power_supply_changed(chg->usb_psy);
@@ -787,12 +793,56 @@ static const struct power_supply_desc dc_psy_desc = {
.property_is_writeable = smbb_charger_writable_property,
};
+static int smbb_chg_otg_enable(struct regulator_dev *rdev)
+{
+ struct smbb_charger *chg = rdev_get_drvdata(rdev);
+ int rc;
+
+ rc = regmap_update_bits(chg->regmap, chg->addr + SMBB_USB_OTG_CTL,
+ OTG_CTL_EN, OTG_CTL_EN);
+ if (rc)
+ dev_err(chg->dev, "failed to update OTG_CTL\n");
+ return rc;
+}
+
+static int smbb_chg_otg_disable(struct regulator_dev *rdev)
+{
+ struct smbb_charger *chg = rdev_get_drvdata(rdev);
+ int rc;
+
+ rc = regmap_update_bits(chg->regmap, chg->addr + SMBB_USB_OTG_CTL,
+ OTG_CTL_EN, 0);
+ if (rc)
+ dev_err(chg->dev, "failed to update OTG_CTL\n");
+ return rc;
+}
+
+static int smbb_chg_otg_is_enabled(struct regulator_dev *rdev)
+{
+ struct smbb_charger *chg = rdev_get_drvdata(rdev);
+ unsigned int value = 0;
+ int rc;
+
+ rc = regmap_read(chg->regmap, chg->addr + SMBB_USB_OTG_CTL, &value);
+ if (rc)
+ dev_err(chg->dev, "failed to read OTG_CTL\n");
+
+ return !!(value & OTG_CTL_EN);
+}
+
+static const struct regulator_ops smbb_chg_otg_ops = {
+ .enable = smbb_chg_otg_enable,
+ .disable = smbb_chg_otg_disable,
+ .is_enabled = smbb_chg_otg_is_enabled,
+};
+
static int smbb_charger_probe(struct platform_device *pdev)
{
struct power_supply_config bat_cfg = {};
struct power_supply_config usb_cfg = {};
struct power_supply_config dc_cfg = {};
struct smbb_charger *chg;
+ struct regulator_config config = { };
int rc, i;
chg = devm_kzalloc(&pdev->dev, sizeof(*chg), GFP_KERNEL);
@@ -905,6 +955,26 @@ static int smbb_charger_probe(struct platform_device *pdev)
}
}
+ /*
+ * otg regulator is used to control VBUS voltage direction
+ * when USB switches between host and gadget mode
+ */
+ chg->otg_rdesc.id = -1;
+ chg->otg_rdesc.name = "otg-vbus";
+ chg->otg_rdesc.ops = &smbb_chg_otg_ops;
+ chg->otg_rdesc.owner = THIS_MODULE;
+ chg->otg_rdesc.type = REGULATOR_VOLTAGE;
+ chg->otg_rdesc.supply_name = "usb-otg-in";
+ chg->otg_rdesc.of_match = "otg-vbus";
+
+ config.dev = &pdev->dev;
+ config.driver_data = chg;
+
+ chg->otg_reg = devm_regulator_register(&pdev->dev, &chg->otg_rdesc,
+ &config);
+ if (IS_ERR(chg->otg_reg))
+ return PTR_ERR(chg->otg_reg);
+
chg->jeita_ext_temp = of_property_read_bool(pdev->dev.of_node,
"qcom,jeita-extended-temp-range");
diff --git a/drivers/power/supply/sbs-charger.c b/drivers/power/supply/sbs-charger.c
new file mode 100644
index 0000000..353765a
--- /dev/null
+++ b/drivers/power/supply/sbs-charger.c
@@ -0,0 +1,274 @@
+/*
+ * Copyright (c) 2016, Prodys S.L.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This adds support for sbs-charger compilant chips as defined here:
+ * http://sbs-forum.org/specs/sbc110.pdf
+ *
+ * Implemetation based on sbs-battery.c
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/power_supply.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/regmap.h>
+#include <linux/of_gpio.h>
+#include <linux/bitops.h>
+
+#define SBS_CHARGER_REG_SPEC_INFO 0x11
+#define SBS_CHARGER_REG_STATUS 0x13
+#define SBS_CHARGER_REG_ALARM_WARNING 0x16
+
+#define SBS_CHARGER_STATUS_CHARGE_INHIBITED BIT(1)
+#define SBS_CHARGER_STATUS_RES_COLD BIT(9)
+#define SBS_CHARGER_STATUS_RES_HOT BIT(10)
+#define SBS_CHARGER_STATUS_BATTERY_PRESENT BIT(14)
+#define SBS_CHARGER_STATUS_AC_PRESENT BIT(15)
+
+#define SBS_CHARGER_POLL_TIME 500
+
+struct sbs_info {
+ struct i2c_client *client;
+ struct power_supply *power_supply;
+ struct regmap *regmap;
+ struct delayed_work work;
+ unsigned int last_state;
+};
+
+static int sbs_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct sbs_info *chip = power_supply_get_drvdata(psy);
+ unsigned int reg;
+
+ reg = chip->last_state;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = !!(reg & SBS_CHARGER_STATUS_BATTERY_PRESENT);
+ break;
+
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = !!(reg & SBS_CHARGER_STATUS_AC_PRESENT);
+ break;
+
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+ if (!(reg & SBS_CHARGER_STATUS_BATTERY_PRESENT))
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ else if (reg & SBS_CHARGER_STATUS_AC_PRESENT &&
+ !(reg & SBS_CHARGER_STATUS_CHARGE_INHIBITED))
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+
+ break;
+
+ case POWER_SUPPLY_PROP_HEALTH:
+ if (reg & SBS_CHARGER_STATUS_RES_COLD)
+ val->intval = POWER_SUPPLY_HEALTH_COLD;
+ if (reg & SBS_CHARGER_STATUS_RES_HOT)
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int sbs_check_state(struct sbs_info *chip)
+{
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_read(chip->regmap, SBS_CHARGER_REG_STATUS, ®);
+ if (!ret && reg != chip->last_state) {
+ chip->last_state = reg;
+ power_supply_changed(chip->power_supply);
+ return 1;
+ }
+
+ return 0;
+}
+
+static void sbs_delayed_work(struct work_struct *work)
+{
+ struct sbs_info *chip = container_of(work, struct sbs_info, work.work);
+
+ sbs_check_state(chip);
+
+ schedule_delayed_work(&chip->work,
+ msecs_to_jiffies(SBS_CHARGER_POLL_TIME));
+}
+
+static irqreturn_t sbs_irq_thread(int irq, void *data)
+{
+ struct sbs_info *chip = data;
+ int ret;
+
+ ret = sbs_check_state(chip);
+
+ return ret ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static enum power_supply_property sbs_properties[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_HEALTH,
+};
+
+static bool sbs_readable_reg(struct device *dev, unsigned int reg)
+{
+ if (reg < SBS_CHARGER_REG_SPEC_INFO)
+ return false;
+ else
+ return true;
+}
+
+static bool sbs_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case SBS_CHARGER_REG_STATUS:
+ return true;
+ }
+
+ return false;
+}
+
+static const struct regmap_config sbs_regmap = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .max_register = SBS_CHARGER_REG_ALARM_WARNING,
+ .readable_reg = sbs_readable_reg,
+ .volatile_reg = sbs_volatile_reg,
+ .val_format_endian = REGMAP_ENDIAN_LITTLE, /* since based on SMBus */
+};
+
+static const struct power_supply_desc sbs_desc = {
+ .name = "sbs-charger",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = sbs_properties,
+ .num_properties = ARRAY_SIZE(sbs_properties),
+ .get_property = sbs_get_property,
+};
+
+static int sbs_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct power_supply_config psy_cfg = {};
+ struct sbs_info *chip;
+ int ret, val;
+
+ chip = devm_kzalloc(&client->dev, sizeof(struct sbs_info), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->client = client;
+ psy_cfg.of_node = client->dev.of_node;
+ psy_cfg.drv_data = chip;
+
+ i2c_set_clientdata(client, chip);
+
+ chip->regmap = devm_regmap_init_i2c(client, &sbs_regmap);
+ if (IS_ERR(chip->regmap))
+ return PTR_ERR(chip->regmap);
+
+ /*
+ * Before we register, we need to make sure we can actually talk
+ * to the battery.
+ */
+ ret = regmap_read(chip->regmap, SBS_CHARGER_REG_STATUS, &val);
+ if (ret) {
+ dev_err(&client->dev, "Failed to get device status\n");
+ return ret;
+ }
+ chip->last_state = val;
+
+ chip->power_supply = devm_power_supply_register(&client->dev, &sbs_desc,
+ &psy_cfg);
+ if (IS_ERR(chip->power_supply)) {
+ dev_err(&client->dev, "Failed to register power supply\n");
+ return PTR_ERR(chip->power_supply);
+ }
+
+ /*
+ * The sbs-charger spec doesn't impose the use of an interrupt. So in
+ * the case it wasn't provided we use polling in order get the charger's
+ * status.
+ */
+ if (client->irq) {
+ ret = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, sbs_irq_thread,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ dev_name(&client->dev), chip);
+ if (ret) {
+ dev_err(&client->dev, "Failed to request irq, %d\n", ret);
+ return ret;
+ }
+ } else {
+ INIT_DELAYED_WORK(&chip->work, sbs_delayed_work);
+ schedule_delayed_work(&chip->work,
+ msecs_to_jiffies(SBS_CHARGER_POLL_TIME));
+ }
+
+ dev_info(&client->dev,
+ "%s: smart charger device registered\n", client->name);
+
+ return 0;
+}
+
+static int sbs_remove(struct i2c_client *client)
+{
+ struct sbs_info *chip = i2c_get_clientdata(client);
+
+ cancel_delayed_work_sync(&chip->work);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id sbs_dt_ids[] = {
+ { .compatible = "sbs,sbs-charger" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, sbs_dt_ids);
+#endif
+
+static const struct i2c_device_id sbs_id[] = {
+ { "sbs-charger", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, sbs_id);
+
+static struct i2c_driver sbs_driver = {
+ .probe = sbs_probe,
+ .remove = sbs_remove,
+ .id_table = sbs_id,
+ .driver = {
+ .name = "sbs-charger",
+ .of_match_table = of_match_ptr(sbs_dt_ids),
+ },
+};
+module_i2c_driver(sbs_driver);
+
+MODULE_AUTHOR("Nicolas Saenz Julienne <nicolassaenzj@gmail.com>");
+MODULE_DESCRIPTION("SBS smart charger driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/tps65217_charger.c b/drivers/power/supply/tps65217_charger.c
index 9fd019f..29b61e8 100644
--- a/drivers/power/supply/tps65217_charger.c
+++ b/drivers/power/supply/tps65217_charger.c
@@ -35,22 +35,22 @@
#include <linux/mfd/core.h>
#include <linux/mfd/tps65217.h>
+#define CHARGER_STATUS_PRESENT (TPS65217_STATUS_ACPWR | TPS65217_STATUS_USBPWR)
+#define NUM_CHARGER_IRQS 2
#define POLL_INTERVAL (HZ * 2)
struct tps65217_charger {
struct tps65217 *tps;
struct device *dev;
- struct power_supply *ac;
+ struct power_supply *psy;
- int ac_online;
- int prev_ac_online;
+ int online;
+ int prev_online;
struct task_struct *poll_task;
-
- int irq;
};
-static enum power_supply_property tps65217_ac_props[] = {
+static enum power_supply_property tps65217_charger_props[] = {
POWER_SUPPLY_PROP_ONLINE,
};
@@ -95,7 +95,7 @@ static int tps65217_enable_charging(struct tps65217_charger *charger)
int ret;
/* charger already enabled */
- if (charger->ac_online)
+ if (charger->online)
return 0;
dev_dbg(charger->dev, "%s: enable charging\n", __func__);
@@ -110,19 +110,19 @@ static int tps65217_enable_charging(struct tps65217_charger *charger)
return ret;
}
- charger->ac_online = 1;
+ charger->online = 1;
return 0;
}
-static int tps65217_ac_get_property(struct power_supply *psy,
- enum power_supply_property psp,
- union power_supply_propval *val)
+static int tps65217_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
{
struct tps65217_charger *charger = power_supply_get_drvdata(psy);
if (psp == POWER_SUPPLY_PROP_ONLINE) {
- val->intval = charger->ac_online;
+ val->intval = charger->online;
return 0;
}
return -EINVAL;
@@ -133,7 +133,7 @@ static irqreturn_t tps65217_charger_irq(int irq, void *dev)
int ret, val;
struct tps65217_charger *charger = dev;
- charger->prev_ac_online = charger->ac_online;
+ charger->prev_online = charger->online;
ret = tps65217_reg_read(charger->tps, TPS65217_REG_STATUS, &val);
if (ret < 0) {
@@ -144,8 +144,8 @@ static irqreturn_t tps65217_charger_irq(int irq, void *dev)
dev_dbg(charger->dev, "%s: 0x%x\n", __func__, val);
- /* check for AC status bit */
- if (val & TPS65217_STATUS_ACPWR) {
+ /* check for charger status bit */
+ if (val & CHARGER_STATUS_PRESENT) {
ret = tps65217_enable_charging(charger);
if (ret) {
dev_err(charger->dev,
@@ -153,11 +153,11 @@ static irqreturn_t tps65217_charger_irq(int irq, void *dev)
return IRQ_HANDLED;
}
} else {
- charger->ac_online = 0;
+ charger->online = 0;
}
- if (charger->prev_ac_online != charger->ac_online)
- power_supply_changed(charger->ac);
+ if (charger->prev_online != charger->online)
+ power_supply_changed(charger->psy);
ret = tps65217_reg_read(charger->tps, TPS65217_REG_CHGCONFIG0, &val);
if (ret < 0) {
@@ -188,11 +188,11 @@ static int tps65217_charger_poll_task(void *data)
}
static const struct power_supply_desc tps65217_charger_desc = {
- .name = "tps65217-ac",
+ .name = "tps65217-charger",
.type = POWER_SUPPLY_TYPE_MAINS,
- .get_property = tps65217_ac_get_property,
- .properties = tps65217_ac_props,
- .num_properties = ARRAY_SIZE(tps65217_ac_props),
+ .get_property = tps65217_charger_get_property,
+ .properties = tps65217_charger_props,
+ .num_properties = ARRAY_SIZE(tps65217_charger_props),
};
static int tps65217_charger_probe(struct platform_device *pdev)
@@ -200,8 +200,10 @@ static int tps65217_charger_probe(struct platform_device *pdev)
struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent);
struct tps65217_charger *charger;
struct power_supply_config cfg = {};
- int irq;
+ struct task_struct *poll_task;
+ int irq[NUM_CHARGER_IRQS];
int ret;
+ int i;
dev_dbg(&pdev->dev, "%s\n", __func__);
@@ -216,18 +218,16 @@ static int tps65217_charger_probe(struct platform_device *pdev)
cfg.of_node = pdev->dev.of_node;
cfg.drv_data = charger;
- charger->ac = devm_power_supply_register(&pdev->dev,
- &tps65217_charger_desc,
- &cfg);
- if (IS_ERR(charger->ac)) {
+ charger->psy = devm_power_supply_register(&pdev->dev,
+ &tps65217_charger_desc,
+ &cfg);
+ if (IS_ERR(charger->psy)) {
dev_err(&pdev->dev, "failed: power supply register\n");
- return PTR_ERR(charger->ac);
+ return PTR_ERR(charger->psy);
}
- irq = platform_get_irq_byname(pdev, "AC");
- if (irq < 0)
- irq = -ENXIO;
- charger->irq = irq;
+ irq[0] = platform_get_irq_byname(pdev, "USB");
+ irq[1] = platform_get_irq_byname(pdev, "AC");
ret = tps65217_config_charger(charger);
if (ret < 0) {
@@ -235,29 +235,36 @@ static int tps65217_charger_probe(struct platform_device *pdev)
return ret;
}
- if (irq != -ENXIO) {
- ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ /* Create a polling thread if an interrupt is invalid */
+ if (irq[0] < 0 || irq[1] < 0) {
+ poll_task = kthread_run(tps65217_charger_poll_task,
+ charger, "ktps65217charger");
+ if (IS_ERR(poll_task)) {
+ ret = PTR_ERR(poll_task);
+ dev_err(charger->dev,
+ "Unable to run kthread err %d\n", ret);
+ return ret;
+ }
+
+ charger->poll_task = poll_task;
+ return 0;
+ }
+
+ /* Create IRQ threads for charger interrupts */
+ for (i = 0; i < NUM_CHARGER_IRQS; i++) {
+ ret = devm_request_threaded_irq(&pdev->dev, irq[i], NULL,
tps65217_charger_irq,
0, "tps65217-charger",
charger);
if (ret) {
dev_err(charger->dev,
- "Unable to register irq %d err %d\n", irq,
+ "Unable to register irq %d err %d\n", irq[i],
ret);
return ret;
}
/* Check current state */
- tps65217_charger_irq(irq, charger);
- } else {
- charger->poll_task = kthread_run(tps65217_charger_poll_task,
- charger, "ktps65217charger");
- if (IS_ERR(charger->poll_task)) {
- ret = PTR_ERR(charger->poll_task);
- dev_err(charger->dev,
- "Unable to run kthread err %d\n", ret);
- return ret;
- }
+ tps65217_charger_irq(-1, charger);
}
return 0;
@@ -267,7 +274,7 @@ static int tps65217_charger_remove(struct platform_device *pdev)
{
struct tps65217_charger *charger = platform_get_drvdata(pdev);
- if (charger->irq == -ENXIO)
+ if (charger->poll_task)
kthread_stop(charger->poll_task);
return 0;
diff --git a/drivers/power/supply/wm97xx_battery.c b/drivers/power/supply/wm97xx_battery.c
index e3edb31..bd4f666 100644
--- a/drivers/power/supply/wm97xx_battery.c
+++ b/drivers/power/supply/wm97xx_battery.c
@@ -175,11 +175,6 @@ static int wm97xx_bat_probe(struct platform_device *dev)
if (dev->id != -1)
return -EINVAL;
- if (!pdata) {
- dev_err(&dev->dev, "No platform_data supplied\n");
- return -EINVAL;
- }
-
if (gpio_is_valid(pdata->charge_gpio)) {
ret = gpio_request(pdata->charge_gpio, "BATT CHRG");
if (ret)
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index a4860bc..f848ee8 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -13,7 +13,7 @@
#include <linux/regmap.h>
-enum {
+enum axp20x_variants {
AXP152_ID = 0,
AXP202_ID,
AXP209_ID,
@@ -532,35 +532,6 @@ struct axp20x_dev {
const struct regmap_irq_chip *regmap_irq_chip;
};
-#define BATTID_LEN 64
-#define OCV_CURVE_SIZE 32
-#define MAX_THERM_CURVE_SIZE 25
-#define PD_DEF_MIN_TEMP 0
-#define PD_DEF_MAX_TEMP 55
-
-struct axp20x_fg_pdata {
- char battid[BATTID_LEN + 1];
- int design_cap;
- int min_volt;
- int max_volt;
- int max_temp;
- int min_temp;
- int cap1;
- int cap0;
- int rdc1;
- int rdc0;
- int ocv_curve[OCV_CURVE_SIZE];
- int tcsz;
- int thermistor_curve[MAX_THERM_CURVE_SIZE][2];
-};
-
-struct axp20x_chrg_pdata {
- int max_cc;
- int max_cv;
- int def_cc;
- int def_cv;
-};
-
struct axp288_extcon_pdata {
/* GPIO pin control to switch D+/D- lines b/w PMIC and SOC */
struct gpio_desc *gpio_mux_cntl;
diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
index bed9557..b312bce 100644
--- a/include/linux/power/bq27xxx_battery.h
+++ b/include/linux/power/bq27xxx_battery.h
@@ -4,8 +4,16 @@
enum bq27xxx_chip {
BQ27000 = 1, /* bq27000, bq27200 */
BQ27010, /* bq27010, bq27210 */
- BQ27500, /* bq27500 */
- BQ27510, /* bq27510, bq27520 */
+ BQ2750X, /* bq27500 deprecated alias */
+ BQ2751X, /* bq27510, bq27520 deprecated alias */
+ BQ27500, /* bq27500/1 */
+ BQ27510G1, /* bq27510G1 */
+ BQ27510G2, /* bq27510G2 */
+ BQ27510G3, /* bq27510G3 */
+ BQ27520G1, /* bq27520G1 */
+ BQ27520G2, /* bq27520G2 */
+ BQ27520G3, /* bq27520G3 */
+ BQ27520G4, /* bq27520G4 */
BQ27530, /* bq27530, bq27531 */
BQ27541, /* bq27541, bq27542, bq27546, bq27742 */
BQ27545, /* bq27545 */
diff --git a/include/soc/at91/at91sam9_ddrsdr.h b/include/soc/at91/at91sam9_ddrsdr.h
index dc10c52..393362b 100644
--- a/include/soc/at91/at91sam9_ddrsdr.h
+++ b/include/soc/at91/at91sam9_ddrsdr.h
@@ -81,6 +81,7 @@
#define AT91_DDRSDRC_LPCB_POWER_DOWN 2
#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3
#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */
+#define AT91_DDRSDRC_LPDDR2_PWOFF (1 << 3) /* LPDDR Power Off */
#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */
#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */
@@ -96,7 +97,9 @@
#define AT91_DDRSDRC_MD_SDR 0
#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
+#define AT91_DDRSDRC_MD_LPDDR3 5
#define AT91_DDRSDRC_MD_DDR2 6 /* [SAM9 Only] */
+#define AT91_DDRSDRC_MD_LPDDR2 7
#define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */
#define AT91_DDRSDRC_DBW_32BITS (0 << 4)
#define AT91_DDRSDRC_DBW_16BITS (1 << 4)