ACPICA: Add 64-bit support to acpi_read and acpi_write
Needed by drivers for new ACPi tables. Internal versions of
these functions still use 32-bit max transfers, in order to
minimize disruption and stack use for the standard ACPI registers
(FADT-based).
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h
index 4afa3d8..36192f1 100644
--- a/drivers/acpi/acpica/achware.h
+++ b/drivers/acpi/acpica/achware.h
@@ -62,6 +62,14 @@
/*
* hwregs - ACPI Register I/O
*/
+acpi_status
+acpi_hw_validate_register(struct acpi_generic_address *reg,
+ u8 max_bit_width, u64 *address);
+
+acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg);
+
+acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg);
+
struct acpi_bit_register_info *acpi_hw_get_bit_register_info(u32 register_id);
acpi_status acpi_hw_write_pm1_control(u32 pm1a_control, u32 pm1b_control);
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index b9d8ee6..afacf44 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -424,8 +424,8 @@
/* Read the Status Register */
status =
- acpi_read(&status_reg,
- &gpe_register_info->status_address);
+ acpi_hw_read(&status_reg,
+ &gpe_register_info->status_address);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
@@ -433,8 +433,8 @@
/* Read the Enable Register */
status =
- acpi_read(&enable_reg,
- &gpe_register_info->enable_address);
+ acpi_hw_read(&enable_reg,
+ &gpe_register_info->enable_address);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c
index 7b34636..a60aaa7 100644
--- a/drivers/acpi/acpica/evgpeblk.c
+++ b/drivers/acpi/acpica/evgpeblk.c
@@ -843,14 +843,14 @@
/* Disable all GPEs within this register */
- status = acpi_write(0x00, &this_register->enable_address);
+ status = acpi_hw_write(0x00, &this_register->enable_address);
if (ACPI_FAILURE(status)) {
goto error_exit;
}
/* Clear any pending GPE events within this register */
- status = acpi_write(0xFF, &this_register->status_address);
+ status = acpi_hw_write(0xFF, &this_register->status_address);
if (ACPI_FAILURE(status)) {
goto error_exit;
}
diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c
index d3b7e37..c28c41b 100644
--- a/drivers/acpi/acpica/hwgpe.c
+++ b/drivers/acpi/acpica/hwgpe.c
@@ -82,7 +82,7 @@
/* Get current value of the enable register that contains this GPE */
- status = acpi_read(&enable_mask, &gpe_register_info->enable_address);
+ status = acpi_hw_read(&enable_mask, &gpe_register_info->enable_address);
if (ACPI_FAILURE(status)) {
return (status);
}
@@ -95,7 +95,7 @@
/* Write the updated enable mask */
- status = acpi_write(enable_mask, &gpe_register_info->enable_address);
+ status = acpi_hw_write(enable_mask, &gpe_register_info->enable_address);
return (status);
}
@@ -130,8 +130,8 @@
/* Write the entire GPE (runtime) enable register */
- status = acpi_write(gpe_register_info->enable_for_run,
- &gpe_register_info->enable_address);
+ status = acpi_hw_write(gpe_register_info->enable_for_run,
+ &gpe_register_info->enable_address);
return (status);
}
@@ -163,8 +163,8 @@
* Write a one to the appropriate bit in the status register to
* clear this GPE.
*/
- status = acpi_write(register_bit,
- &gpe_event_info->register_info->status_address);
+ status = acpi_hw_write(register_bit,
+ &gpe_event_info->register_info->status_address);
return (status);
}
@@ -222,7 +222,7 @@
/* GPE currently active (status bit == 1)? */
- status = acpi_read(&in_byte, &gpe_register_info->status_address);
+ status = acpi_hw_read(&in_byte, &gpe_register_info->status_address);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
@@ -266,8 +266,8 @@
/* Disable all GPEs in this register */
status =
- acpi_write(0x00,
- &gpe_block->register_info[i].enable_address);
+ acpi_hw_write(0x00,
+ &gpe_block->register_info[i].enable_address);
if (ACPI_FAILURE(status)) {
return (status);
}
@@ -303,8 +303,8 @@
/* Clear status on all GPEs in this register */
status =
- acpi_write(0xFF,
- &gpe_block->register_info[i].status_address);
+ acpi_hw_write(0xFF,
+ &gpe_block->register_info[i].status_address);
if (ACPI_FAILURE(status)) {
return (status);
}
@@ -345,9 +345,9 @@
/* Enable all "runtime" GPEs in this register */
- status = acpi_write(gpe_block->register_info[i].enable_for_run,
- &gpe_block->register_info[i].
- enable_address);
+ status =
+ acpi_hw_write(gpe_block->register_info[i].enable_for_run,
+ &gpe_block->register_info[i].enable_address);
if (ACPI_FAILURE(status)) {
return (status);
}
@@ -387,9 +387,9 @@
/* Enable all "wake" GPEs in this register */
- status = acpi_write(gpe_block->register_info[i].enable_for_wake,
- &gpe_block->register_info[i].
- enable_address);
+ status =
+ acpi_hw_write(gpe_block->register_info[i].enable_for_wake,
+ &gpe_block->register_info[i].enable_address);
if (ACPI_FAILURE(status)) {
return (status);
}
diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c
index 23d5505..15c9ed2 100644
--- a/drivers/acpi/acpica/hwregs.c
+++ b/drivers/acpi/acpica/hwregs.c
@@ -62,6 +62,184 @@
struct acpi_generic_address *register_a,
struct acpi_generic_address *register_b);
+/******************************************************************************
+ *
+ * FUNCTION: acpi_hw_validate_register
+ *
+ * PARAMETERS: Reg - GAS register structure
+ * max_bit_width - Max bit_width supported (32 or 64)
+ * Address - Pointer to where the gas->address
+ * is returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Validate the contents of a GAS register. Checks the GAS
+ * pointer, Address, space_id, bit_width, and bit_offset.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_hw_validate_register(struct acpi_generic_address *reg,
+ u8 max_bit_width, u64 *address)
+{
+
+ /* Must have a valid pointer to a GAS structure */
+
+ if (!reg) {
+ return (AE_BAD_PARAMETER);
+ }
+
+ /*
+ * Copy the target address. This handles possible alignment issues.
+ * Address must not be null. A null address also indicates an optional
+ * ACPI register that is not supported, so no error message.
+ */
+ ACPI_MOVE_64_TO_64(address, ®->address);
+ if (!(*address)) {
+ return (AE_BAD_ADDRESS);
+ }
+
+ /* Validate the space_iD */
+
+ if ((reg->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) &&
+ (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO)) {
+ ACPI_ERROR((AE_INFO,
+ "Unsupported address space: 0x%X", reg->space_id));
+ return (AE_SUPPORT);
+ }
+
+ /* Validate the bit_width */
+
+ if ((reg->bit_width != 8) &&
+ (reg->bit_width != 16) &&
+ (reg->bit_width != 32) && (reg->bit_width != max_bit_width)) {
+ ACPI_ERROR((AE_INFO,
+ "Unsupported register bit width: 0x%X",
+ reg->bit_width));
+ return (AE_SUPPORT);
+ }
+
+ /* Validate the bit_offset. Just a warning for now. */
+
+ if (reg->bit_offset != 0) {
+ ACPI_WARNING((AE_INFO,
+ "Unsupported register bit offset: 0x%X",
+ reg->bit_offset));
+ }
+
+ return (AE_OK);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_hw_read
+ *
+ * PARAMETERS: Value - Where the value is returned
+ * Reg - GAS register structure
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Read from either memory or IO space. This is a 32-bit max
+ * version of acpi_read, used internally since the overhead of
+ * 64-bit values is not needed.
+ *
+ * LIMITATIONS: <These limitations also apply to acpi_hw_write>
+ * bit_width must be exactly 8, 16, or 32.
+ * space_iD must be system_memory or system_iO.
+ * bit_offset and access_width are currently ignored, as there has
+ * not been a need to implement these.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg)
+{
+ u64 address;
+ acpi_status status;
+
+ ACPI_FUNCTION_NAME(hw_read);
+
+ /* Validate contents of the GAS register */
+
+ status = acpi_hw_validate_register(reg, 32, &address);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* Initialize entire 32-bit return value to zero */
+
+ *value = 0;
+
+ /*
+ * Two address spaces supported: Memory or IO. PCI_Config is
+ * not supported here because the GAS structure is insufficient
+ */
+ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+ status = acpi_os_read_memory((acpi_physical_address)
+ address, value, reg->bit_width);
+ } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
+
+ status = acpi_hw_read_port((acpi_io_address)
+ address, value, reg->bit_width);
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_IO,
+ "Read: %8.8X width %2d from %8.8X%8.8X (%s)\n",
+ *value, reg->bit_width, ACPI_FORMAT_UINT64(address),
+ acpi_ut_get_region_name(reg->space_id)));
+
+ return (status);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_hw_write
+ *
+ * PARAMETERS: Value - Value to be written
+ * Reg - GAS register structure
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Write to either memory or IO space. This is a 32-bit max
+ * version of acpi_write, used internally since the overhead of
+ * 64-bit values is not needed.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg)
+{
+ u64 address;
+ acpi_status status;
+
+ ACPI_FUNCTION_NAME(hw_write);
+
+ /* Validate contents of the GAS register */
+
+ status = acpi_hw_validate_register(reg, 32, &address);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /*
+ * Two address spaces supported: Memory or IO. PCI_Config is
+ * not supported here because the GAS structure is insufficient
+ */
+ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+ status = acpi_os_write_memory((acpi_physical_address)
+ address, value, reg->bit_width);
+ } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
+
+ status = acpi_hw_write_port((acpi_io_address)
+ address, value, reg->bit_width);
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_IO,
+ "Wrote: %8.8X width %2d to %8.8X%8.8X (%s)\n",
+ value, reg->bit_width, ACPI_FORMAT_UINT64(address),
+ acpi_ut_get_region_name(reg->space_id)));
+
+ return (status);
+}
+
/*******************************************************************************
*
* FUNCTION: acpi_hw_clear_acpi_status
@@ -152,15 +330,16 @@
ACPI_FUNCTION_TRACE(hw_write_pm1_control);
- status = acpi_write(pm1a_control, &acpi_gbl_FADT.xpm1a_control_block);
+ status =
+ acpi_hw_write(pm1a_control, &acpi_gbl_FADT.xpm1a_control_block);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
if (acpi_gbl_FADT.xpm1b_control_block.address) {
status =
- acpi_write(pm1b_control,
- &acpi_gbl_FADT.xpm1b_control_block);
+ acpi_hw_write(pm1b_control,
+ &acpi_gbl_FADT.xpm1b_control_block);
}
return_ACPI_STATUS(status);
}
@@ -218,12 +397,13 @@
case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */
- status = acpi_read(&value, &acpi_gbl_FADT.xpm2_control_block);
+ status =
+ acpi_hw_read(&value, &acpi_gbl_FADT.xpm2_control_block);
break;
case ACPI_REGISTER_PM_TIMER: /* 32-bit access */
- status = acpi_read(&value, &acpi_gbl_FADT.xpm_timer_block);
+ status = acpi_hw_read(&value, &acpi_gbl_FADT.xpm_timer_block);
break;
case ACPI_REGISTER_SMI_COMMAND_BLOCK: /* 8-bit access */
@@ -340,7 +520,8 @@
* as per the ACPI spec.
*/
status =
- acpi_read(&read_value, &acpi_gbl_FADT.xpm2_control_block);
+ acpi_hw_read(&read_value,
+ &acpi_gbl_FADT.xpm2_control_block);
if (ACPI_FAILURE(status)) {
goto exit;
}
@@ -350,12 +531,13 @@
ACPI_INSERT_BITS(value, ACPI_PM2_CONTROL_PRESERVED_BITS,
read_value);
- status = acpi_write(value, &acpi_gbl_FADT.xpm2_control_block);
+ status =
+ acpi_hw_write(value, &acpi_gbl_FADT.xpm2_control_block);
break;
case ACPI_REGISTER_PM_TIMER: /* 32-bit access */
- status = acpi_write(value, &acpi_gbl_FADT.xpm_timer_block);
+ status = acpi_hw_write(value, &acpi_gbl_FADT.xpm_timer_block);
break;
case ACPI_REGISTER_SMI_COMMAND_BLOCK: /* 8-bit access */
@@ -401,7 +583,7 @@
/* The first register is always required */
- status = acpi_read(&value_a, register_a);
+ status = acpi_hw_read(&value_a, register_a);
if (ACPI_FAILURE(status)) {
return (status);
}
@@ -409,7 +591,7 @@
/* Second register is optional */
if (register_b->address) {
- status = acpi_read(&value_b, register_b);
+ status = acpi_hw_read(&value_b, register_b);
if (ACPI_FAILURE(status)) {
return (status);
}
@@ -452,7 +634,7 @@
/* The first register is always required */
- status = acpi_write(value, register_a);
+ status = acpi_hw_write(value, register_a);
if (ACPI_FAILURE(status)) {
return (status);
}
@@ -470,7 +652,7 @@
* and writes have no side effects"
*/
if (register_b->address) {
- status = acpi_write(value, register_b);
+ status = acpi_hw_write(value, register_b);
}
return (status);
diff --git a/drivers/acpi/acpica/hwtimer.c b/drivers/acpi/acpica/hwtimer.c
index b7f522c..6b282e8 100644
--- a/drivers/acpi/acpica/hwtimer.c
+++ b/drivers/acpi/acpica/hwtimer.c
@@ -100,7 +100,7 @@
}
status =
- acpi_hw_low_level_read(32, ticks, &acpi_gbl_FADT.xpm_timer_block);
+ acpi_hw_read(ticks, &acpi_gbl_FADT.xpm_timer_block);
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c
index 9829979..4ead85f 100644
--- a/drivers/acpi/acpica/hwxface.c
+++ b/drivers/acpi/acpica/hwxface.c
@@ -80,7 +80,7 @@
/* Write the reset value to the reset register */
- status = acpi_write(acpi_gbl_FADT.reset_value, reset_reg);
+ status = acpi_hw_write(acpi_gbl_FADT.reset_value, reset_reg);
return_ACPI_STATUS(status);
}
@@ -97,67 +97,92 @@
*
* DESCRIPTION: Read from either memory or IO space.
*
+ * LIMITATIONS: <These limitations also apply to acpi_write>
+ * bit_width must be exactly 8, 16, 32, or 64.
+ * space_iD must be system_memory or system_iO.
+ * bit_offset and access_width are currently ignored, as there has
+ * not been a need to implement these.
+ *
******************************************************************************/
-acpi_status acpi_read(u32 *value, struct acpi_generic_address *reg)
+acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg)
{
+ u32 value;
u32 width;
u64 address;
acpi_status status;
ACPI_FUNCTION_NAME(acpi_read);
- /*
- * Must have a valid pointer to a GAS structure, and a non-zero address
- * within.
- */
- if (!reg) {
+ if (!return_value) {
return (AE_BAD_PARAMETER);
}
- /* Get a local copy of the address. Handles possible alignment issues */
+ /* Validate contents of the GAS register. Allow 64-bit transfers */
- ACPI_MOVE_64_TO_64(&address, ®->address);
- if (!address) {
- return (AE_BAD_ADDRESS);
+ status = acpi_hw_validate_register(reg, 64, &address);
+ if (ACPI_FAILURE(status)) {
+ return (status);
}
- /* Supported widths are 8/16/32 */
-
width = reg->bit_width;
- if ((width != 8) && (width != 16) && (width != 32)) {
- return (AE_SUPPORT);
+ if (width == 64) {
+ width = 32; /* Break into two 32-bit transfers */
}
- /* Initialize entire 32-bit return value to zero */
+ /* Initialize entire 64-bit return value to zero */
- *value = 0;
+ *return_value = 0;
+ value = 0;
/*
* Two address spaces supported: Memory or IO. PCI_Config is
* not supported here because the GAS structure is insufficient
*/
- switch (reg->space_id) {
- case ACPI_ADR_SPACE_SYSTEM_MEMORY:
+ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+ status = acpi_os_read_memory((acpi_physical_address)
+ address, &value, width);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ *return_value = value;
- status = acpi_os_read_memory((acpi_physical_address) address,
- value, width);
- break;
+ if (reg->bit_width == 64) {
- case ACPI_ADR_SPACE_SYSTEM_IO:
+ /* Read the top 32 bits */
- status =
- acpi_hw_read_port((acpi_io_address) address, value, width);
- break;
+ status = acpi_os_read_memory((acpi_physical_address)
+ (address + 4), &value, 32);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ *return_value |= ((u64)value << 32);
+ }
+ } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
- default:
- ACPI_ERROR((AE_INFO,
- "Unsupported address space: %X", reg->space_id));
- return (AE_BAD_PARAMETER);
+ status = acpi_hw_read_port((acpi_io_address)
+ address, &value, width);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ *return_value = value;
+
+ if (reg->bit_width == 64) {
+
+ /* Read the top 32 bits */
+
+ status = acpi_hw_read_port((acpi_io_address)
+ (address + 4), &value, 32);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ *return_value |= ((u64)value << 32);
+ }
}
ACPI_DEBUG_PRINT((ACPI_DB_IO,
- "Read: %8.8X width %2d from %8.8X%8.8X (%s)\n",
- *value, width, ACPI_FORMAT_UINT64(address),
+ "Read: %8.8X%8.8X width %2d from %8.8X%8.8X (%s)\n",
+ ACPI_FORMAT_UINT64(*return_value), reg->bit_width,
+ ACPI_FORMAT_UINT64(address),
acpi_ut_get_region_name(reg->space_id)));
return (status);
@@ -169,7 +194,7 @@
*
* FUNCTION: acpi_write
*
- * PARAMETERS: Value - To be written
+ * PARAMETERS: Value - Value to be written
* Reg - GAS register structure
*
* RETURN: Status
@@ -177,7 +202,7 @@
* DESCRIPTION: Write to either memory or IO space.
*
******************************************************************************/
-acpi_status acpi_write(u32 value, struct acpi_generic_address *reg)
+acpi_status acpi_write(u64 value, struct acpi_generic_address *reg)
{
u32 width;
u64 address;
@@ -185,54 +210,61 @@
ACPI_FUNCTION_NAME(acpi_write);
- /*
- * Must have a valid pointer to a GAS structure, and a non-zero address
- * within.
- */
- if (!reg) {
- return (AE_BAD_PARAMETER);
+ /* Validate contents of the GAS register. Allow 64-bit transfers */
+
+ status = acpi_hw_validate_register(reg, 64, &address);
+ if (ACPI_FAILURE(status)) {
+ return (status);
}
- /* Get a local copy of the address. Handles possible alignment issues */
-
- ACPI_MOVE_64_TO_64(&address, ®->address);
- if (!address) {
- return (AE_BAD_ADDRESS);
- }
-
- /* Supported widths are 8/16/32 */
-
width = reg->bit_width;
- if ((width != 8) && (width != 16) && (width != 32)) {
- return (AE_SUPPORT);
+ if (width == 64) {
+ width = 32; /* Break into two 32-bit transfers */
}
/*
- * Two address spaces supported: Memory or IO.
- * PCI_Config is not supported here because the GAS struct is insufficient
+ * Two address spaces supported: Memory or IO. PCI_Config is
+ * not supported here because the GAS structure is insufficient
*/
- switch (reg->space_id) {
- case ACPI_ADR_SPACE_SYSTEM_MEMORY:
+ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+ status = acpi_os_write_memory((acpi_physical_address)
+ address, ACPI_LODWORD(value),
+ width);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
- status = acpi_os_write_memory((acpi_physical_address) address,
- value, width);
- break;
+ if (reg->bit_width == 64) {
+ status = acpi_os_write_memory((acpi_physical_address)
+ (address + 4),
+ ACPI_HIDWORD(value), 32);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ }
+ } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
- case ACPI_ADR_SPACE_SYSTEM_IO:
-
- status = acpi_hw_write_port((acpi_io_address) address, value,
+ status = acpi_hw_write_port((acpi_io_address)
+ address, ACPI_LODWORD(value),
width);
- break;
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
- default:
- ACPI_ERROR((AE_INFO,
- "Unsupported address space: %X", reg->space_id));
- return (AE_BAD_PARAMETER);
+ if (reg->bit_width == 64) {
+ status = acpi_hw_write_port((acpi_io_address)
+ (address + 4),
+ ACPI_HIDWORD(value), 32);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ }
}
ACPI_DEBUG_PRINT((ACPI_DB_IO,
- "Wrote: %8.8X width %2d to %8.8X%8.8X (%s)\n",
- value, width, ACPI_FORMAT_UINT64(address),
+ "Wrote: %8.8X%8.8X width %2d to %8.8X%8.8X (%s)\n",
+ ACPI_FORMAT_UINT64(value), reg->bit_width,
+ ACPI_FORMAT_UINT64(address),
acpi_ut_get_region_name(reg->space_id)));
return (status);
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 2aecaa5..b450a19 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -360,9 +360,9 @@
acpi_status acpi_set_firmware_waking_vector64(u64 physical_address);
#endif
-acpi_status acpi_read(u32 *value, struct acpi_generic_address *reg);
+acpi_status acpi_read(u64 *value, struct acpi_generic_address *reg);
-acpi_status acpi_write(u32 value, struct acpi_generic_address *reg);
+acpi_status acpi_write(u64 value, struct acpi_generic_address *reg);
acpi_status
acpi_get_sleep_type_data(u8 sleep_state, u8 * slp_typ_a, u8 * slp_typ_b);