[ALSA] hda-intel: support for iMac 24'' released on 09/2006

Basic audio support for the iMac 24'' model released on 09/2006,
including
headphone jack detection with automatic speaker muting.
This iMac uses the Realtek ALC885 codec, not a Sigmatel one as in
other models.
Functionality has been tested for internal speakers, headphone and
microphone.

Signed-off-by: Nicola Fagnani <nicfagn@iol.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 5825d99..9a47eec 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -153,6 +153,7 @@
 	ALC882_TARGA,
 	ALC882_ASUS_A7J,
 	ALC885_MACPRO,
+	ALC885_IMAC24,
 	ALC882_AUTO,
 	ALC882_MODEL_LAST,
 };
@@ -5118,6 +5119,60 @@
 	{ }
 };
 
+/* iMac 24 mixer. */
+static struct snd_kcontrol_new alc885_imac24_mixer[] = {
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Master Playback Switch", 0x0c, 0x00, HDA_INPUT),
+	{ } /* end */
+};
+
+/* iMac 24 init verbs. */
+static struct hda_verb alc885_imac24_init_verbs[] = {
+	/* Internal speakers: output 0 (0x0c) */
+	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x18, AC_VERB_SET_CONNECT_SEL, 0x00},
+	/* Internal speakers: output 0 (0x0c) */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x00},
+	/* Headphone: output 0 (0x0c) */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
+	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+	/* Front Mic: input vref at 80% */
+	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	{ }
+};
+
+/* Toggle speaker-output according to the hp-jack state */
+static void alc885_imac24_automute(struct hda_codec *codec)
+{
+ 	unsigned int present;
+
+ 	present = snd_hda_codec_read(codec, 0x14, 0,
+				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	snd_hda_codec_amp_update(codec, 0x18, 0, HDA_OUTPUT, 0,
+				 0x80, present ? 0x80 : 0);
+	snd_hda_codec_amp_update(codec, 0x18, 1, HDA_OUTPUT, 0,
+				 0x80, present ? 0x80 : 0);
+	snd_hda_codec_amp_update(codec, 0x1a, 0, HDA_OUTPUT, 0,
+				 0x80, present ? 0x80 : 0);
+	snd_hda_codec_amp_update(codec, 0x1a, 1, HDA_OUTPUT, 0,
+				 0x80, present ? 0x80 : 0);
+}
+
+/* Processes unsolicited events. */
+static void alc885_imac24_unsol_event(struct hda_codec *codec,
+				      unsigned int res)
+{
+	/* Headphone insertion or removal. */
+	if ((res >> 26) == ALC880_HP_EVENT)
+		alc885_imac24_automute(codec);
+}
+
 static struct hda_verb alc882_targa_verbs[] = {
 	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
@@ -5338,6 +5393,7 @@
 	[ALC882_ARIMA]		= "arima",
 	[ALC882_W2JC]		= "w2jc",
 	[ALC885_MACPRO]		= "macpro",
+	[ALC885_IMAC24]		= "imac24",
 	[ALC882_AUTO]		= "auto",
 };
 
@@ -5410,6 +5466,19 @@
 		.channel_mode = alc882_ch_modes,
 		.input_mux = &alc882_capture_source,
 	},
+	[ALC885_IMAC24] = {
+		.mixers = { alc885_imac24_mixer },
+		.init_verbs = { alc885_imac24_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc882_dac_nids),
+		.dac_nids = alc882_dac_nids,
+		.dig_out_nid = ALC882_DIGOUT_NID,
+		.dig_in_nid = ALC882_DIGIN_NID,
+		.num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
+		.channel_mode = alc882_ch_modes,
+		.input_mux = &alc882_capture_source,
+		.unsol_event = alc885_imac24_unsol_event,
+		.init_hook = alc885_imac24_automute,
+	},
 	[ALC882_TARGA] = {
 		.mixers = { alc882_targa_mixer, alc882_chmode_mixer,
 			    alc882_capture_mixer },
@@ -5582,6 +5651,9 @@
 		case 0x106b0c00: /* Mac Pro */
 			board_config = ALC885_MACPRO;
 			break;
+		case 0x106b1000: /* iMac 24 */
+			board_config = ALC885_IMAC24;
+			break;
 		default:
 			printk(KERN_INFO "hda_codec: Unknown model for ALC882, "
 		       			 "trying auto-probe from BIOS...\n");
@@ -5608,7 +5680,7 @@
 	if (board_config != ALC882_AUTO)
 		setup_preset(spec, &alc882_presets[board_config]);
 
-	if (board_config == ALC885_MACPRO) {
+	if (board_config == ALC885_MACPRO || board_config == ALC885_IMAC24) {
 		alc882_gpio_mute(codec, 0, 0);
 		alc882_gpio_mute(codec, 1, 0);
 	}