Merge tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
"Add support for stat of various special file types (WSL reparse points
for char, block, fifo)"
* tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number
smb3: add some missing definitions from MS-FSCC
smb3: remove two unused variables
smb3: add support for stat of WSL reparse points for special file types
diff --git a/Documentation/ABI/testing/sysfs-driver-xen-blkback b/Documentation/ABI/testing/sysfs-driver-xen-blkback
index ecb7942..ac2947b 100644
--- a/Documentation/ABI/testing/sysfs-driver-xen-blkback
+++ b/Documentation/ABI/testing/sysfs-driver-xen-blkback
@@ -35,3 +35,12 @@
controls the duration in milliseconds that blkback will not
cache any page not backed by a grant mapping.
The default is 10ms.
+
+What: /sys/module/xen_blkback/parameters/feature_persistent
+Date: September 2020
+KernelVersion: 5.10
+Contact: SeongJae Park <sjpark@amazon.de>
+Description:
+ Whether to enable the persistent grants feature or not. Note
+ that this option only takes effect on newly created backends.
+ The default is Y (enable).
diff --git a/Documentation/ABI/testing/sysfs-driver-xen-blkfront b/Documentation/ABI/testing/sysfs-driver-xen-blkfront
index c0a6cb7..2800890 100644
--- a/Documentation/ABI/testing/sysfs-driver-xen-blkfront
+++ b/Documentation/ABI/testing/sysfs-driver-xen-blkfront
@@ -1,4 +1,4 @@
-What: /sys/module/xen_blkfront/parameters/max
+What: /sys/module/xen_blkfront/parameters/max_indirect_segments
Date: June 2013
KernelVersion: 3.11
Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
@@ -8,3 +8,12 @@
is 32 - higher value means more potential throughput but more
memory usage. The backend picks the minimum of the frontend
and its default backend value.
+
+What: /sys/module/xen_blkfront/parameters/feature_persistent
+Date: September 2020
+KernelVersion: 5.10
+Contact: SeongJae Park <sjpark@amazon.de>
+Description:
+ Whether to enable the persistent grants feature or not. Note
+ that this option only takes effect on newly created frontends.
+ The default is Y (enable).
diff --git a/Documentation/admin-guide/LSM/SafeSetID.rst b/Documentation/admin-guide/LSM/SafeSetID.rst
index 7bff07c..17996c9 100644
--- a/Documentation/admin-guide/LSM/SafeSetID.rst
+++ b/Documentation/admin-guide/LSM/SafeSetID.rst
@@ -3,9 +3,9 @@
=========
SafeSetID is an LSM module that gates the setid family of syscalls to restrict
UID/GID transitions from a given UID/GID to only those approved by a
-system-wide whitelist. These restrictions also prohibit the given UIDs/GIDs
+system-wide allowlist. These restrictions also prohibit the given UIDs/GIDs
from obtaining auxiliary privileges associated with CAP_SET{U/G}ID, such as
-allowing a user to set up user namespace UID mappings.
+allowing a user to set up user namespace UID/GID mappings.
Background
@@ -98,10 +98,21 @@
==================
This LSM hooks the setid syscalls to make sure transitions are allowed if an
applicable restriction policy is in place. Policies are configured through
-securityfs by writing to the safesetid/add_whitelist_policy and
-safesetid/flush_whitelist_policies files at the location where securityfs is
-mounted. The format for adding a policy is '<UID>:<UID>', using literal
-numbers, such as '123:456'. To flush the policies, any write to the file is
-sufficient. Again, configuring a policy for a UID will prevent that UID from
-obtaining auxiliary setid privileges, such as allowing a user to set up user
-namespace UID mappings.
+securityfs by writing to the safesetid/uid_allowlist_policy and
+safesetid/gid_allowlist_policy files at the location where securityfs is
+mounted. The format for adding a policy is '<UID>:<UID>' or '<GID>:<GID>',
+using literal numbers, and ending with a newline character such as '123:456\n'.
+Writing an empty string "" will flush the policy. Again, configuring a policy
+for a UID/GID will prevent that UID/GID from obtaining auxiliary setid
+privileges, such as allowing a user to set up user namespace UID/GID mappings.
+
+Note on GID policies and setgroups()
+==================
+In v5.9 we are adding support for limiting CAP_SETGID privileges as was done
+previously for CAP_SETUID. However, for compatibility with common sandboxing
+related code conventions in userspace, we currently allow arbitrary
+setgroups() calls for processes with CAP_SETGID restrictions. Until we add
+support in a future release for restricting setgroups() calls, these GID
+policies add no meaningful security. setgroups() restrictions will be enforced
+once we have the policy checking code in place, which will rely on GID policy
+configuration code added in v5.9.
diff --git a/Documentation/admin-guide/cpu-load.rst b/Documentation/admin-guide/cpu-load.rst
index ebdecf8..f3ada90 100644
--- a/Documentation/admin-guide/cpu-load.rst
+++ b/Documentation/admin-guide/cpu-load.rst
@@ -61,43 +61,46 @@
static volatile sig_atomic_t stop;
- static void sighandler (int signr)
+ static void sighandler(int signr)
{
- (void) signr;
- stop = 1;
+ (void) signr;
+ stop = 1;
}
+
static unsigned long hog (unsigned long niters)
{
- stop = 0;
- while (!stop && --niters);
- return niters;
+ stop = 0;
+ while (!stop && --niters);
+ return niters;
}
+
int main (void)
{
- int i;
- struct itimerval it = { .it_interval = { .tv_sec = 0, .tv_usec = 1 },
- .it_value = { .tv_sec = 0, .tv_usec = 1 } };
- sigset_t set;
- unsigned long v[HIST];
- double tmp = 0.0;
- unsigned long n;
- signal (SIGALRM, &sighandler);
- setitimer (ITIMER_REAL, &it, NULL);
+ int i;
+ struct itimerval it = {
+ .it_interval = { .tv_sec = 0, .tv_usec = 1 },
+ .it_value = { .tv_sec = 0, .tv_usec = 1 } };
+ sigset_t set;
+ unsigned long v[HIST];
+ double tmp = 0.0;
+ unsigned long n;
+ signal(SIGALRM, &sighandler);
+ setitimer(ITIMER_REAL, &it, NULL);
- hog (ULONG_MAX);
- for (i = 0; i < HIST; ++i) v[i] = ULONG_MAX - hog (ULONG_MAX);
- for (i = 0; i < HIST; ++i) tmp += v[i];
- tmp /= HIST;
- n = tmp - (tmp / 3.0);
+ hog (ULONG_MAX);
+ for (i = 0; i < HIST; ++i) v[i] = ULONG_MAX - hog(ULONG_MAX);
+ for (i = 0; i < HIST; ++i) tmp += v[i];
+ tmp /= HIST;
+ n = tmp - (tmp / 3.0);
- sigemptyset (&set);
- sigaddset (&set, SIGALRM);
+ sigemptyset(&set);
+ sigaddset(&set, SIGALRM);
- for (;;) {
- hog (n);
- sigwait (&set, &i);
- }
- return 0;
+ for (;;) {
+ hog(n);
+ sigwait(&set, &i);
+ }
+ return 0;
}
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 02d4adb..526d65d 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -5978,6 +5978,13 @@
After which time (jiffies) the event handling loop
should start to delay EOI handling. Default is 2.
+ xen.fifo_events= [XEN]
+ Boolean parameter to disable using fifo event handling
+ even if available. Normally fifo event handling is
+ preferred over the 2-level event handling, as it is
+ fairer and the number of possible event channels is
+ much higher. Default is on (use fifo events).
+
nopv= [X86,XEN,KVM,HYPER_V,VMWARE]
Disables the PV optimizations forcing the guest to run
as generic guest with no PV drivers. Currently support
diff --git a/Documentation/admin-guide/sysctl/vm.rst b/Documentation/admin-guide/sysctl/vm.rst
index 4b9d2e8..f455fa0 100644
--- a/Documentation/admin-guide/sysctl/vm.rst
+++ b/Documentation/admin-guide/sysctl/vm.rst
@@ -27,6 +27,7 @@
- admin_reserve_kbytes
- block_dump
- compact_memory
+- compaction_proactiveness
- compact_unevictable_allowed
- dirty_background_bytes
- dirty_background_ratio
@@ -37,6 +38,7 @@
- dirty_writeback_centisecs
- drop_caches
- extfrag_threshold
+- highmem_is_dirtyable
- hugetlb_shm_group
- laptop_mode
- legacy_va_layout
diff --git a/Documentation/arm64/hugetlbpage.rst b/Documentation/arm64/hugetlbpage.rst
index b44f939..a110124 100644
--- a/Documentation/arm64/hugetlbpage.rst
+++ b/Documentation/arm64/hugetlbpage.rst
@@ -1,3 +1,5 @@
+.. _hugetlbpage_index:
+
====================
HugeTLBpage on ARM64
====================
diff --git a/Documentation/block/queue-sysfs.rst b/Documentation/block/queue-sysfs.rst
index f261a5c..2638d34 100644
--- a/Documentation/block/queue-sysfs.rst
+++ b/Documentation/block/queue-sysfs.rst
@@ -124,6 +124,10 @@
EXPLICIT OPEN, IMPLICIT OPEN or CLOSED, is limited by this value.
If this value is 0, there is no limit.
+If the host attempts to exceed this limit, the driver should report this error
+with BLK_STS_ZONE_ACTIVE_RESOURCE, which user space may see as the EOVERFLOW
+errno.
+
max_open_zones (RO)
-------------------
For zoned block devices (zoned attribute indicating "host-managed" or
@@ -131,6 +135,10 @@
EXPLICIT OPEN or IMPLICIT OPEN, is limited by this value.
If this value is 0, there is no limit.
+If the host attempts to exceed this limit, the driver should report this error
+with BLK_STS_ZONE_OPEN_RESOURCE, which user space may see as the ETOOMANYREFS
+errno.
+
max_sectors_kb (RW)
-------------------
This is the maximum number of kilobytes that the block layer will allow
diff --git a/Documentation/core-api/dma-api.rst b/Documentation/core-api/dma-api.rst
index ea04132..75cb757 100644
--- a/Documentation/core-api/dma-api.rst
+++ b/Documentation/core-api/dma-api.rst
@@ -519,10 +519,9 @@
Part II - Non-coherent DMA allocations
--------------------------------------
-These APIs allow to allocate pages in the kernel direct mapping that are
-guaranteed to be DMA addressable. This means that unlike dma_alloc_coherent,
-virt_to_page can be called on the resulting address, and the resulting
-struct page can be used for everything a struct page is suitable for.
+These APIs allow to allocate pages that are guaranteed to be DMA addressable
+by the passed in device, but which need explicit management of memory ownership
+for the kernel vs the device.
If you don't understand how cache line coherency works between a processor and
an I/O device, you should not be using this part of the API.
@@ -537,7 +536,7 @@
This routine allocates a region of <size> bytes of consistent memory. It
returns a pointer to the allocated region (in the processor's virtual address
space) or NULL if the allocation failed. The returned memory may or may not
-be in the kernels direct mapping. Drivers must not call virt_to_page on
+be in the kernel direct mapping. Drivers must not call virt_to_page on
the returned memory region.
It also returns a <dma_handle> which may be cast to an unsigned integer the
@@ -565,7 +564,45 @@
Free a region of memory previously allocated using dma_alloc_noncoherent().
dev, size and dma_handle and dir must all be the same as those passed into
dma_alloc_noncoherent(). cpu_addr must be the virtual address returned by
-the dma_alloc_noncoherent().
+dma_alloc_noncoherent().
+
+::
+
+ struct page *
+ dma_alloc_pages(struct device *dev, size_t size, dma_addr_t *dma_handle,
+ enum dma_data_direction dir, gfp_t gfp)
+
+This routine allocates a region of <size> bytes of non-coherent memory. It
+returns a pointer to first struct page for the region, or NULL if the
+allocation failed. The resulting struct page can be used for everything a
+struct page is suitable for.
+
+It also returns a <dma_handle> which may be cast to an unsigned integer the
+same width as the bus and given to the device as the DMA address base of
+the region.
+
+The dir parameter specified if data is read and/or written by the device,
+see dma_map_single() for details.
+
+The gfp parameter allows the caller to specify the ``GFP_`` flags (see
+kmalloc()) for the allocation, but rejects flags used to specify a memory
+zone such as GFP_DMA or GFP_HIGHMEM.
+
+Before giving the memory to the device, dma_sync_single_for_device() needs
+to be called, and before reading memory written by the device,
+dma_sync_single_for_cpu(), just like for streaming DMA mappings that are
+reused.
+
+::
+
+ void
+ dma_free_pages(struct device *dev, size_t size, struct page *page,
+ dma_addr_t dma_handle, enum dma_data_direction dir)
+
+Free a region of memory previously allocated using dma_alloc_pages().
+dev, size and dma_handle and dir must all be the same as those passed into
+dma_alloc_noncoherent(). page must be the pointer returned by
+dma_alloc_pages().
::
diff --git a/Documentation/devicetree/bindings/arm/actions.yaml b/Documentation/devicetree/bindings/arm/actions.yaml
index 14023f0..fe22c66 100644
--- a/Documentation/devicetree/bindings/arm/actions.yaml
+++ b/Documentation/devicetree/bindings/arm/actions.yaml
@@ -20,6 +20,12 @@
- enum:
- allo,sparky # Allo.com Sparky
- cubietech,cubieboard6 # Cubietech CubieBoard6
+ - roseapplepi,roseapplepi # RoseapplePi.org RoseapplePi
+ - const: actions,s500
+ - items:
+ - enum:
+ - caninos,labrador-base-m # Labrador Base Board M v1
+ - const: caninos,labrador-v2 # Labrador Core v2
- const: actions,s500
- items:
- enum:
@@ -30,6 +36,11 @@
# The Actions Semi S700 is a quad-core ARM Cortex-A53 SoC.
- items:
- enum:
+ - caninos,labrador-base-m2 # Labrador Base Board M v2
+ - const: caninos,labrador-v3 # Labrador Core v3
+ - const: actions,s700
+ - items:
+ - enum:
- cubietech,cubieboard7 # Cubietech CubieBoard7
- const: actions,s700
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 5eba9f4..0ee7c5b 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -96,6 +96,7 @@
- hwacom,amazetv
- khadas,vim
- libretech,aml-s905x-cc
+ - libretech,aml-s905x-cc-v2
- nexbox,a95x
- const: amlogic,s905x
- const: amlogic,meson-gxl
@@ -153,6 +154,7 @@
- azw,gtking
- azw,gtking-pro
- hardkernel,odroid-n2
+ - hardkernel,odroid-n2-plus
- khadas,vim3
- ugoos,am6
- const: amlogic,s922x
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
index 31b0c54..614c919 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
@@ -41,6 +41,7 @@
- overkiz,kizboxmini-mb # Overkiz kizbox Mini Mother Board
- overkiz,kizboxmini-rd # Overkiz kizbox Mini RailDIN
- overkiz,smartkiz # Overkiz SmartKiz Board
+ - gardena,smart-gateway-at91sam # GARDENA smart Gateway (Article No. 19000)
- const: atmel,at91sam9g25
- const: atmel,at91sam9x5
- const: atmel,at91sam9
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
index d48313c..988e0bb 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
@@ -83,6 +83,8 @@
- brcm,bcm953012er
- brcm,bcm953012hr
- brcm,bcm953012k
+ - meraki,mr32
- const: brcm,brcm53012
+ - const: brcm,brcm53016
- const: brcm,bcm4708
...
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 6da9d73..1ca9dfa 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -120,6 +120,7 @@
- fsl,imx6q-sabrelite
- fsl,imx6q-sabresd
- kontron,imx6q-samx6i # Kontron i.MX6 Dual/Quad SMARC Module
+ - logicpd,imx6q-logicpd
- prt,prti6q # Protonic PRTI6Q board
- prt,prtwd2 # Protonic WD2 board
- technexion,imx6q-pico-dwarf # TechNexion i.MX6Q Pico-Dwarf
@@ -156,6 +157,21 @@
- const: gw,ventana
- const: fsl,imx6q
+ - description: i.MX6Q PHYTEC phyBOARD-Mira
+ items:
+ - enum:
+ - phytec,imx6q-pbac06-emmc # PHYTEC phyBOARD-Mira eMMC RDK
+ - phytec,imx6q-pbac06-nand # PHYTEC phyBOARD-Mira NAND RDK
+ - const: phytec,imx6q-pbac06 # PHYTEC phyBOARD-Mira
+ - const: phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6
+ - const: fsl,imx6q
+
+ - description: i.MX6Q PHYTEC phyFLEX-i.MX6
+ items:
+ - const: phytec,imx6q-pbab01 # PHYTEC phyFLEX carrier board
+ - const: phytec,imx6q-pfla02 # PHYTEC phyFLEX-i.MX6 Quad
+ - const: fsl,imx6q
+
- description: i.MX6QP based Boards
items:
- enum:
@@ -163,6 +179,13 @@
- fsl,imx6qp-sabresd # i.MX6 Quad Plus SABRE Smart Device Board
- const: fsl,imx6qp
+ - description: i.MX6QP PHYTEC phyBOARD-Mira
+ items:
+ - const: phytec,imx6qp-pbac06-nand
+ - const: phytec,imx6qp-pbac06 # PHYTEC phyBOARD-Mira
+ - const: phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6
+ - const: fsl,imx6qp
+
- description: i.MX6DL based Boards
items:
- enum:
@@ -188,6 +211,7 @@
- toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6 Module V1.1 on Colibri Evaluation Board V3
- ysoft,imx6dl-yapp4-draco # i.MX6 DualLite Y Soft IOTA Draco board
- ysoft,imx6dl-yapp4-hydra # i.MX6 DualLite Y Soft IOTA Hydra board
+ - ysoft,imx6dl-yapp4-orion # i.MX6 DualLite Y Soft IOTA Orion board
- ysoft,imx6dl-yapp4-ursa # i.MX6 Solo Y Soft IOTA Ursa board
- const: fsl,imx6dl
@@ -211,10 +235,26 @@
- const: gw,ventana
- const: fsl,imx6dl
+ - description: i.MX6DL PHYTEC phyBOARD-Mira
+ items:
+ - enum:
+ - phytec,imx6dl-pbac06-emmc # PHYTEC phyBOARD-Mira eMMC RDK
+ - phytec,imx6dl-pbac06-nand # PHYTEC phyBOARD-Mira NAND RDK
+ - const: phytec,imx6dl-pbac06 # PHYTEC phyBOARD-Mira
+ - const: phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6
+ - const: fsl,imx6dl
+
+ - description: i.MX6DL PHYTEC phyFLEX-i.MX6
+ items:
+ - const: phytec,imx6dl-pbab01 # PHYTEC phyFLEX carrier board
+ - const: phytec,imx6dl-pfla02 # PHYTEC phyFLEX-i.MX6 Quad
+ - const: fsl,imx6dl
+
- description: i.MX6SL based Boards
items:
- enum:
- fsl,imx6sl-evk # i.MX6 SoloLite EVK Board
+ - kobo,tolino-shine2hd
- kobo,tolino-shine3
- const: fsl,imx6sl
@@ -246,6 +286,15 @@
- technexion,imx6ul-pico-pi # TechNexion i.MX6UL Pico-Pi
- const: fsl,imx6ul
+ - description: i.MX6UL PHYTEC phyBOARD-Segin
+ items:
+ - enum:
+ - phytec,imx6ul-pbacd10-emmc
+ - phytec,imx6ul-pbacd10-nand
+ - const: phytec,imx6ul-pbacd10 # PHYTEC phyBOARD-Segin with i.MX6 UL
+ - const: phytec,imx6ul-pcl063 # PHYTEC phyCORE-i.MX 6UL
+ - const: fsl,imx6ul
+
- description: Kontron N6310 S Board
items:
- const: kontron,imx6ul-n6310-s
@@ -277,6 +326,15 @@
- toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board
- const: fsl,imx6ull
+ - description: i.MX6ULL PHYTEC phyBOARD-Segin
+ items:
+ - enum:
+ - phytec,imx6ull-pbacd10-emmc
+ - phytec,imx6ull-pbacd10-nand
+ - const: phytec,imx6ull-pbacd10 # PHYTEC phyBOARD-Segin with i.MX6 ULL
+ - const: phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL
+ - const: fsl,imx6ull
+
- description: Kontron N6411 S Board
items:
- const: kontron,imx6ull-n6411-s
@@ -344,7 +402,16 @@
- description: i.MX8MM based Boards
items:
- enum:
+ - beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit
+ - fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board
- fsl,imx8mm-evk # i.MX8MM EVK Board
+ - variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module
+ - const: fsl,imx8mm
+
+ - description: Variscite VAR-SOM-MX8MM based boards
+ items:
+ - const: variscite,var-som-mx8mm-symphony
+ - const: variscite,var-som-mx8mm
- const: fsl,imx8mm
- description: i.MX8MN based Boards
@@ -354,6 +421,12 @@
- fsl,imx8mn-evk # i.MX8MN LPDDR4 EVK Board
- const: fsl,imx8mn
+ - description: Variscite VAR-SOM-MX8MN based boards
+ items:
+ - const: variscite,var-som-mx8mn-symphony
+ - const: variscite,var-som-mx8mn
+ - const: fsl,imx8mn
+
- description: i.MX8MP based Boards
items:
- enum:
@@ -372,13 +445,35 @@
- technexion,pico-pi-imx8m # TechNexion PICO-PI-8M evk
- const: fsl,imx8mq
+ - description: Purism Librem5 phones
+ items:
+ - enum:
+ - purism,librem5r2 # Purism Librem5 phone "Chestnut"
+ - purism,librem5r3 # Purism Librem5 phone "Dogwood"
+ - const: purism,librem5
+ - const: fsl,imx8mq
+
+ - description: Zodiac Inflight Innovations Ultra Boards
+ items:
+ - enum:
+ - zii,imx8mq-ultra-rmb3
+ - zii,imx8mq-ultra-zest
+ - const: zii,imx8mq-ultra
+ - const: fsl,imx8mq
+
- description: i.MX8QXP based Boards
items:
- enum:
- einfochips,imx8qxp-ai_ml # i.MX8QXP AI_ML Board
- fsl,imx8qxp-mek # i.MX8QXP MEK Board
- toradex,colibri-imx8x # Colibri iMX8X Module
+ - const: fsl,imx8qxp
+
+ - description: Toradex Colibri i.MX8 Evaluation Board
+ items:
+ - enum:
- toradex,colibri-imx8x-eval-v3 # Colibri iMX8X Module on Colibri Evaluation Board V3
+ - const: toradex,colibri-imx8x
- const: fsl,imx8qxp
- description:
diff --git a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
index fcd3456..42db138 100644
--- a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
+++ b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
@@ -18,6 +18,7 @@
(base address and length)
Optional properties:
+- #power-domain-cells: Should be 0 if the instance is a power domain provider.
- #reset-cells: Should be 1 if the PRM instance in question supports resets.
Example:
@@ -25,5 +26,6 @@
prm_dsp2: prm@1b00 {
compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
reg = <0x1b00 0x40>;
+ #power-domain-cells = <0>;
#reset-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index ae6284b..ad25deb 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -40,6 +40,7 @@
sdm630
sdm660
sdm845
+ sm8250
The 'board' element must be one of the following strings:
@@ -47,6 +48,8 @@
cp01-c1
dragonboard
hk01
+ hk10-c1
+ hk10-c2
idp
liquid
mtp
@@ -150,6 +153,8 @@
- items:
- enum:
- qcom,ipq8074-hk01
+ - qcom,ipq8074-hk10-c1
+ - qcom,ipq8074-hk10-c2
- const: qcom,ipq8074
- items:
@@ -167,4 +172,10 @@
- qcom,ipq6018-cp01-c1
- const: qcom,ipq6018
+ - items:
+ - enum:
+ - qcom,qrb5165-rb5
+ - qcom,sm8250-mtp
+ - const: qcom,sm8250
+
...
diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml
index 0d4dabb..01a6d0c 100644
--- a/Documentation/devicetree/bindings/arm/renesas.yaml
+++ b/Documentation/devicetree/bindings/arm/renesas.yaml
@@ -281,6 +281,18 @@
- renesas,draak # Draak (RTP0RC77995SEB0010S)
- const: renesas,r8a77995
+ - description: R-Car V3U (R8A779A0)
+ items:
+ - enum:
+ - renesas,falcon-cpu # Falcon CPU board (RTP0RC779A0CPB0010S)
+ - const: renesas,r8a779a0
+
+ - items:
+ - enum:
+ - renesas,falcon-breakout # Falcon BreakOut board (RTP0RC779A0BOB0010S)
+ - const: renesas,falcon-cpu
+ - const: renesas,r8a779a0
+
- description: RZ/N1D (R9A06G032)
items:
- enum:
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index db2e3579..65b4cc2 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -104,6 +104,11 @@
- firefly,roc-rk3399-pc-mezzanine
- const: rockchip,rk3399
+ - description: FriendlyElec NanoPi R2S
+ items:
+ - const: friendlyarm,nanopi-r2s
+ - const: rockchip,rk3328
+
- description: FriendlyElec NanoPi4 series boards
items:
- enum:
@@ -430,8 +435,12 @@
- const: radxa,rock
- const: rockchip,rk3188
- - description: Radxa ROCK Pi 4
+ - description: Radxa ROCK Pi 4A/B/C
items:
+ - enum:
+ - radxa,rockpi4a
+ - radxa,rockpi4b
+ - radxa,rockpi4c
- const: radxa,rockpi4
- const: rockchip,rk3399
@@ -555,4 +564,9 @@
items:
- const: tronsmart,orion-r68-meta
- const: rockchip,rk3368
+
+ - description: Zkmagic A95X Z2
+ items:
+ - const: zkmagic,a95x-z2
+ - const: rockchip,rk3318
...
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
index cde9c5e..17678d9 100644
--- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
@@ -24,6 +24,7 @@
- samsung,exynos5420-pmu
- samsung,exynos5433-pmu
- samsung,exynos7-pmu
+ - samsung-s5pv210-pmu
required:
- compatible
@@ -40,6 +41,7 @@
- samsung,exynos5420-pmu
- samsung,exynos5433-pmu
- samsung,exynos7-pmu
+ - samsung-s5pv210-pmu
- const: syscon
reg:
@@ -88,12 +90,28 @@
required:
- compatible
- reg
- - '#clock-cells'
- - clock-names
- - clocks
additionalProperties: false
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,exynos3250-pmu
+ - samsung,exynos4210-pmu
+ - samsung,exynos4412-pmu
+ - samsung,exynos5250-pmu
+ - samsung,exynos5410-pmu
+ - samsung,exynos5420-pmu
+ - samsung,exynos5433-pmu
+ then:
+ required:
+ - '#clock-cells'
+ - clock-names
+ - clocks
+
examples:
- |
#include <dt-bindings/clock/exynos5250.h>
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index 696a010..deacb4e 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -52,4 +52,10 @@
- const: st,stm32mp157c-ev1
- const: st,stm32mp157c-ed1
- const: st,stm32mp157
+ - description: Odyssey STM32MP1 SoM based Boards
+ items:
+ - enum:
+ - seeed,stm32mp157c-odyssey
+ - const: seeed,stm32mp157c-odyssey-som
+ - const: st,stm32mp157
...
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index efc9118..afa0026 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -16,6 +16,11 @@
compatible:
oneOf:
+ - description: Allwinner A100 Perf1 Board
+ items:
+ - const: allwinner,a100-perf1
+ - const: allwinner,sun50i-a100
+
- description: Allwinner A23 Evaluation Board
items:
- const: allwinner,sun8i-a23-evb
@@ -626,6 +631,11 @@
- const: pine64,pine64-plus
- const: allwinner,sun50i-a64
+ - description: Pine64 PineCube
+ items:
+ - const: pine64,pinecube
+ - const: allwinner,sun8i-s3
+
- description: Pine64 PineH64 model A
items:
- const: pine64,pine-h64
diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml
index b4d5329..8ae4494 100644
--- a/Documentation/devicetree/bindings/arm/tegra.yaml
+++ b/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -121,3 +121,7 @@
items:
- const: nvidia,p3509-0000+p3668-0000
- const: nvidia,tegra194
+ - items:
+ - enum:
+ - nvidia,tegra234-vdk
+ - const: nvidia,tegra234
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
index 2d89cdc..576462f 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
@@ -4,6 +4,7 @@
- compatible: Should contain one of the following:
- "nvidia,tegra186-pmc": for Tegra186
- "nvidia,tegra194-pmc": for Tegra194
+ - "nvidia,tegra234-pmc": for Tegra234
- reg: Must contain an (offset, length) pair of the register set for each
entry in reg-names.
- reg-names: Must include the following entries:
@@ -11,7 +12,7 @@
- "wake"
- "aotag"
- "scratch"
- - "misc" (Only for Tegra194)
+ - "misc" (Only for Tegra194 and later)
Optional properties:
- nvidia,invert-interrupt: If present, inverts the PMU interrupt signal.
diff --git a/Documentation/devicetree/bindings/arm/ti/k3.txt b/Documentation/devicetree/bindings/arm/ti/k3.txt
deleted file mode 100644
index 333e725..0000000
--- a/Documentation/devicetree/bindings/arm/ti/k3.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Texas Instruments K3 Multicore SoC architecture device tree bindings
---------------------------------------------------------------------
-
-Platforms based on Texas Instruments K3 Multicore SoC architecture
-shall follow the following scheme:
-
-SoCs
-----
-
-Each device tree root node must specify which exact SoC in K3 Multicore SoC
-architecture it uses, using one of the following compatible values:
-
-- AM654
- compatible = "ti,am654";
-
-- J721E
- compatible = "ti,j721e";
-
-Boards
-------
-
-In addition, each device tree root node must specify which one or more
-of the following board-specific compatible values:
-
-- AM654 EVM
- compatible = "ti,am654-evm", "ti,am654";
diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml
new file mode 100644
index 0000000..8297512
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/ti/k3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Multicore SoC architecture device tree bindings
+
+maintainers:
+ - Nishanth Menon <nm@ti.com>
+
+description: |
+ Platforms based on Texas Instruments K3 Multicore SoC architecture
+ shall have the following properties.
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+
+ - description: K3 AM654 SoC
+ items:
+ - enum:
+ - ti,am654-evm
+ - const: ti,am654
+
+ - description: K3 J721E SoC
+ items:
+ - const: ti,j721e
+
+ - description: K3 J7200 SoC
+ items:
+ - const: ti,j7200
+...
diff --git a/Documentation/devicetree/bindings/arm/toshiba.yaml b/Documentation/devicetree/bindings/arm/toshiba.yaml
new file mode 100644
index 0000000..0e06629
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/toshiba.yaml
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/toshiba.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti Platform Device Tree Bindings
+
+maintainers:
+ - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: Visconti5 TMPV7708
+ items:
+ - enum:
+ - toshiba,tmpv7708-rm-mbrc # TMPV7708 RM main board
+ - const: toshiba,tmpv7708
+...
diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
index 729def6..10f6d0a 100644
--- a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
+++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
@@ -10,7 +10,8 @@
"brcm,bcm7038-gisb-arb" for 130nm chips
- reg: specifies the base physical address and size of the registers
- interrupts: specifies the two interrupts (timeout and TEA) to be used from
- the parent interrupt controller
+ the parent interrupt controller. A third optional interrupt may be specified
+ for breakpoints.
Optional properties:
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
index fc82357..0429fb7 100644
--- a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
@@ -23,7 +23,9 @@
- items:
- const: allwinner,sun7i-a20-crypto
- const: allwinner,sun4i-a10-crypto
+ - const: allwinner,sun8i-a33-crypto
- items:
+ - const: allwinner,sun8i-v3s-crypto
- const: allwinner,sun8i-a33-crypto
reg:
@@ -59,7 +61,9 @@
properties:
compatible:
contains:
- const: allwinner,sun6i-a31-crypto
+ enum:
+ - allwinner,sun6i-a31-crypto
+ - allwinner,sun8i-a33-crypto
then:
required:
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
index 9e53472..372679d 100644
--- a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
@@ -19,9 +19,12 @@
description: The cell is the request line number.
compatible:
- enum:
- - allwinner,sun50i-a64-dma
- - allwinner,sun50i-h6-dma
+ oneOf:
+ - const: allwinner,sun50i-a64-dma
+ - const: allwinner,sun50i-h6-dma
+ - items:
+ - const: allwinner,sun8i-r40-dma
+ - const: allwinner,sun50i-a64-dma
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
index 2aaf661..b109911 100644
--- a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
+++ b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
@@ -7,6 +7,7 @@
For Tegra132 must contain "nvidia,tegra132-efuse", "nvidia,tegra124-efuse".
For Tegra210 must contain "nvidia,tegra210-efuse". For Tegra186 must contain
"nvidia,tegra186-efuse". For Tegra194 must contain "nvidia,tegra194-efuse".
+ For Tegra234 must contain "nvidia,tegra234-efuse".
Details:
nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
due to a hardware bug. Tegra20 also lacks certain information which is
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
index 53708fe..eceaa17 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
@@ -25,6 +25,7 @@
- allwinner,sun4i-a10-mali
- allwinner,sun7i-a20-mali
- allwinner,sun8i-h3-mali
+ - allwinner,sun8i-r40-mali
- allwinner,sun50i-a64-mali
- rockchip,rk3036-mali
- rockchip,rk3066-mali
@@ -131,6 +132,7 @@
enum:
- allwinner,sun4i-a10-mali
- allwinner,sun7i-a20-mali
+ - allwinner,sun8i-r40-mali
- allwinner,sun50i-a64-mali
- allwinner,sun50i-h5-mali
- amlogic,meson8-mali
diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml
new file mode 100644
index 0000000..054406b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/adc-joystick.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ADC attached joystick
+
+maintainers:
+ - Artur Rojek <contact@artur-rojek.eu>
+
+description: >
+ Bindings for joystick devices connected to ADC controllers supporting
+ the Industrial I/O subsystem.
+
+properties:
+ compatible:
+ const: adc-joystick
+
+ io-channels:
+ minItems: 1
+ maxItems: 1024
+ description: >
+ List of phandle and IIO specifier pairs.
+ Each pair defines one ADC channel to which a joystick axis is connected.
+ See Documentation/devicetree/bindings/iio/iio-bindings.txt for details.
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+required:
+ - compatible
+ - io-channels
+ - '#address-cells'
+ - '#size-cells'
+
+additionalProperties: false
+
+patternProperties:
+ "^axis@[0-9a-f]+$":
+ type: object
+ description: >
+ Represents a joystick axis bound to the given ADC channel.
+ For each entry in the io-channels list, one axis subnode with a matching
+ reg property must be specified.
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 1023
+ description: Index of an io-channels list entry bound to this axis.
+
+ linux,code:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: EV_ABS specific event code generated by the axis.
+
+ abs-range:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - items:
+ - description: minimum value
+ - description: maximum value
+ description: >
+ Minimum and maximum values produced by the axis.
+ For an ABS_X axis this will be the left-most and right-most
+ inclination of the joystick. If min > max, it is left to userspace to
+ treat the axis as inverted.
+ This property is interpreted as two signed 32 bit values.
+
+ abs-fuzz:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ Amount of noise in the input value.
+ Omitting this property indicates the axis is precise.
+
+ abs-flat:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ Axial "deadzone", or area around the center position, where the axis
+ is considered to be at rest.
+ Omitting this property indicates the axis always returns to exactly
+ the center position.
+
+ required:
+ - reg
+ - linux,code
+ - abs-range
+
+ additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/iio/adc/ingenic,adc.h>
+ #include <dt-bindings/input/input.h>
+
+ joystick: adc-joystick {
+ compatible = "adc-joystick";
+ io-channels = <&adc INGENIC_ADC_TOUCH_XP>,
+ <&adc INGENIC_ADC_TOUCH_YP>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ axis@0 {
+ reg = <0>;
+ linux,code = <ABS_X>;
+ abs-range = <3300 0>;
+ abs-fuzz = <4>;
+ abs-flat = <200>;
+ };
+ axis@1 {
+ reg = <1>;
+ linux,code = <ABS_Y>;
+ abs-range = <0 3300>;
+ abs-fuzz = <4>;
+ abs-flat = <200>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt b/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt
new file mode 100644
index 0000000..446efb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt
@@ -0,0 +1,40 @@
+Device tree bindings for Zinitx BT541 touchscreen controller
+
+Required properties:
+
+ - compatible : Should be "zinitix,bt541"
+ - reg : I2C address of the chip. Should be 0x20
+ - interrupts : Interrupt to which the chip is connected
+
+Optional properties:
+
+ - vdd-supply : Analog power supply regulator on VCCA pin
+ - vddo-supply : Digital power supply regulator on VDD pin
+ - zinitix,mode : Mode of reporting touch points. Some modes may not work
+ with a particular ts firmware for unknown reasons. Available
+ modes are 1 and 2. Mode 2 is the default and preferred.
+
+The touchscreen-* properties are documented in touchscreen.txt in this
+directory.
+
+Example:
+
+ i2c@00000000 {
+ /* ... */
+
+ bt541@20 {
+ compatible = "zinitix,bt541";
+ reg = <0x20>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsp_default>;
+ vdd-supply = <®_vdd_tsp>;
+ vddo-supply = <&pm8916_l6>;
+ touchscreen-size-x = <540>;
+ touchscreen-size-y = <960>;
+ zinitix,mode = <2>;
+ };
+
+ /* ... */
+ };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
index 7cd6b8b..8acca0a 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
@@ -29,11 +29,14 @@
- items:
- const: allwinner,sun8i-a83t-r-intc
- const: allwinner,sun6i-a31-r-intc
- - const: allwinner,sun9i-a80-sc-nmi
+ - const: allwinner,sun9i-a80-nmi
- items:
- const: allwinner,sun50i-a64-r-intc
- const: allwinner,sun6i-a31-r-intc
- items:
+ - const: allwinner,sun50i-a100-nmi
+ - const: allwinner,sun9i-a80-nmi
+ - items:
- const: allwinner,sun50i-h6-r-intc
- const: allwinner,sun6i-a31-r-intc
diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
index 8f810fc..ffd09b6 100644
--- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
+++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
@@ -16,6 +16,7 @@
properties:
compatible:
enum:
+ - qcom,ipq6018-apcs-apps-global
- qcom,ipq8074-apcs-apps-global
- qcom,msm8916-apcs-kpss-global
- qcom,msm8994-apcs-kpss-global
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
index 7838804..5fa19d4 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
@@ -18,10 +18,13 @@
oneOf:
- const: allwinner,sun4i-a10-ir
- const: allwinner,sun5i-a13-ir
+ - const: allwinner,sun6i-a31-ir
- items:
- const: allwinner,sun8i-a83t-ir
- const: allwinner,sun6i-a31-ir
- - const: allwinner,sun6i-a31-ir
+ - items:
+ - const: allwinner,sun8i-r40-ir
+ - const: allwinner,sun6i-a31-ir
- items:
- const: allwinner,sun50i-a64-ir
- const: allwinner,sun6i-a31-ir
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
index b645736..dbafffe 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
@@ -5,7 +5,7 @@
Mediatek SMI have two generations of HW architecture, here is the list
which generation the SoCs use:
generation 1: mt2701 and mt7623.
-generation 2: mt2712, mt6779, mt8173 and mt8183.
+generation 2: mt2712, mt6779, mt8167, mt8173 and mt8183.
There's slight differences between the two SMI, for generation 2, the
register which control the iommu port is at each larb's register base. But
@@ -20,6 +20,7 @@
"mediatek,mt2712-smi-common"
"mediatek,mt6779-smi-common"
"mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common"
+ "mediatek,mt8167-smi-common"
"mediatek,mt8173-smi-common"
"mediatek,mt8183-smi-common"
- reg : the register and size of the SMI block.
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
index 8f19dfe..0c5de12 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
@@ -8,6 +8,7 @@
"mediatek,mt2712-smi-larb"
"mediatek,mt6779-smi-larb"
"mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb"
+ "mediatek,mt8167-smi-larb"
"mediatek,mt8173-smi-larb"
"mediatek,mt8183-smi-larb"
- reg : the register and size of this local arbiter.
@@ -22,7 +23,7 @@
- "gals": the clock for GALS(Global Async Local Sync).
Here is the list which has this GALS: mt8183.
-Required property for mt2701, mt2712, mt6779 and mt7623:
+Required property for mt2701, mt2712, mt6779, mt7623 and mt8167:
- mediatek,larb-id :the hardware id of this larb.
Example:
diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt b/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt
index 892ba43..43d777e 100644
--- a/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt
+++ b/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt
@@ -1,11 +1,13 @@
-NVIDIA Tegra186 MISC register block
+NVIDIA Tegra186 (and later) MISC register block
-The MISC register block found on Tegra186 SoCs contains registers that can be
-used to identify a given chip and various strapping options.
+The MISC register block found on Tegra186 and later SoCs contains registers
+that can be used to identify a given chip and various strapping options.
Required properties:
- compatible: Must be:
- Tegra186: "nvidia,tegra186-misc"
+ - Tegra194: "nvidia,tegra194-misc"
+ - Tegra234: "nvidia,tegra234-misc"
- reg: Should contain 2 entries: The first entry gives the physical address
and length of the register region which contains revision and debug
features. The second entry specifies the physical address and length
diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
index 4556359..83f6a25 100644
--- a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
+++ b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
@@ -1,10 +1,13 @@
-NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 apbmisc block
+NVIDIA Tegra APBMISC block
Required properties:
-- compatible : For Tegra20, must be "nvidia,tegra20-apbmisc". For Tegra30,
- must be "nvidia,tegra30-apbmisc". Otherwise, must contain
- "nvidia,<chip>-apbmisc", plus one of the above, where <chip> is tegra114,
- tegra124, tegra132.
+- compatible: Must be:
+ - Tegra20: "nvidia,tegra20-apbmisc"
+ - Tegra30: "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc"
+ - Tegra114: "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc"
+ - Tegra124: "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc"
+ - Tegra132: "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc"
+ - Tegra210: "nvidia,tegra210-apbmisc", "nvidia,tegra20-apbmisc"
- reg: Should contain 2 entries: the first entry gives the physical address
and length of the registers which contain revision and debug features.
The second entry gives the physical address and length of the
diff --git a/Documentation/devicetree/bindings/net/socionext-netsec.txt b/Documentation/devicetree/bindings/net/socionext-netsec.txt
index 9d6c9feb..a3c1dff 100644
--- a/Documentation/devicetree/bindings/net/socionext-netsec.txt
+++ b/Documentation/devicetree/bindings/net/socionext-netsec.txt
@@ -30,7 +30,9 @@
- max-frame-size: See ethernet.txt in the same directory.
The MAC address will be determined using the optional properties
-defined in ethernet.txt.
+defined in ethernet.txt. The 'phy-mode' property is required, but may
+be set to the empty string if the PHY configuration is programmed by
+the firmware or set by hardware straps, and needs to be preserved.
Example:
eth0: ethernet@522d0000 {
diff --git a/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt b/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt
index 56ed481..72ba628 100644
--- a/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt
+++ b/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt
@@ -2,7 +2,7 @@
Required Properties:
compatible:
- - "fsl,vf610-ocotp" for VF5xx/VF6xx
+ - "fsl,vf610-ocotp", "syscon" for VF5xx/VF6xx
#address-cells : Should be 1
#size-cells : Should be 1
reg : Address and length of OTP controller and fuse map registers
@@ -11,7 +11,7 @@
Example for Vybrid VF5xx/VF6xx:
ocotp: ocotp@400a5000 {
- compatible = "fsl,vf610-ocotp";
+ compatible = "fsl,vf610-ocotp", "syscon";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x400a5000 0xCF0>;
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
index 4f524f8..d30f85c 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
@@ -27,6 +27,7 @@
- amlogic,meson8b-pwrc
- amlogic,meson8m2-pwrc
- amlogic,meson-gxbb-pwrc
+ - amlogic,meson-axg-pwrc
- amlogic,meson-g12a-pwrc
- amlogic,meson-sm1-pwrc
@@ -42,11 +43,11 @@
- const: vapb
resets:
- minItems: 11
+ minItems: 5
maxItems: 12
reset-names:
- minItems: 11
+ minItems: 5
maxItems: 12
"#power-domain-cells":
@@ -111,6 +112,24 @@
properties:
compatible:
enum:
+ - amlogic,meson-axg-pwrc
+ then:
+ properties:
+ reset-names:
+ items:
+ - const: viu
+ - const: venc
+ - const: vcbus
+ - const: vencl
+ - const: vid_lock
+ required:
+ - resets
+ - reset-names
+
+ - if:
+ properties:
+ compatible:
+ enum:
- amlogic,meson-g12a-pwrc
- amlogic,meson-sm1-pwrc
then:
diff --git a/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml b/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml
new file mode 100644
index 0000000..63b15ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/brcm,bcm63xx-power.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: BCM63xx power domain driver
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+
+description: |
+ BCM6318, BCM6328, BCM6362 and BCM63268 SoCs have a power domain controller
+ to enable/disable certain components in order to save power.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - brcm,bcm6318-power-controller
+ - brcm,bcm6328-power-controller
+ - brcm,bcm6362-power-controller
+ - brcm,bcm63268-power-controller
+
+ reg:
+ maxItems: 1
+
+ "#power-domain-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - "#power-domain-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ periph_pwr: power-controller@10001848 {
+ compatible = "brcm,bcm6328-power-controller";
+ reg = <0x10001848 0x4>;
+ #power-domain-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
index ec2aaee..99e8042 100644
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
@@ -40,6 +40,7 @@
- renesas,r8a77980-sysc # R-Car V3H
- renesas,r8a77990-sysc # R-Car E3
- renesas,r8a77995-sysc # R-Car D3
+ - renesas,r8a779a0-sysc # R-Car V3U
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.yaml b/Documentation/devicetree/bindings/reset/renesas,rst.yaml
index 2849ce4..620cd05 100644
--- a/Documentation/devicetree/bindings/reset/renesas,rst.yaml
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.yaml
@@ -47,6 +47,7 @@
- renesas,r8a77980-rst # R-Car V3H
- renesas,r8a77990-rst # R-Car E3
- renesas,r8a77995-rst # R-Car D3
+ - renesas,r8a779a0-rst # R-Car V3U
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
index 27a45fe..ed83686 100644
--- a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
+++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
@@ -1,7 +1,7 @@
--------------------------------------------------------------------------
- = Zynq UltraScale+ MPSoC reset driver binding =
+ = Zynq UltraScale+ MPSoC and Versal reset driver binding =
--------------------------------------------------------------------------
-The Zynq UltraScale+ MPSoC has several different resets.
+The Zynq UltraScale+ MPSoC and Versal has several different resets.
See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information
about zynqmp resets.
@@ -10,7 +10,8 @@
controller binding usage.
Required Properties:
-- compatible: "xlnx,zynqmp-reset"
+- compatible: "xlnx,zynqmp-reset" for Zynq UltraScale+ MPSoC platform
+ "xlnx,versal-reset" for Versal platform
- #reset-cells: Specifies the number of cells needed to encode reset
line, should be 1
@@ -37,8 +38,10 @@
specify them as a reset phandle in their corresponding node as
specified in reset.txt.
-For list of all valid reset indicies see
+For list of all valid reset indices for Zynq UltraScale+ MPSoC see
<dt-bindings/reset/xlnx-zynqmp-resets.h>
+For list of all valid reset indices for Versal see
+<dt-bindings/reset/xlnx-versal-resets.h>
Example:
diff --git a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml
index ae33fc9..c3c595e2 100644
--- a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml
+++ b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml
@@ -62,11 +62,6 @@
$ref: /schemas/types.yaml#/definitions/uint32
description: TI-SCI device id of the ring accelerator
- ti,dma-ring-reset-quirk:
- $ref: /schemas/types.yaml#definitions/flag
- description: |
- enable ringacc/udma ring state interoperability issue software w/a
-
required:
- compatible
- reg
@@ -94,7 +89,6 @@
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
ti,num-rings = <818>;
ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
- ti,dma-ring-reset-quirk;
ti,sci = <&dmsc>;
ti,sci-dev-id = <187>;
msi-parent = <&inta_main_udmass>;
diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
new file mode 100644
index 0000000..037c51b
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
@@ -0,0 +1,439 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/ti/ti,pruss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: |+
+ TI Programmable Real-Time Unit and Industrial Communication Subsystem
+
+maintainers:
+ - Suman Anna <s-anna@ti.com>
+
+description: |+
+
+ The Programmable Real-Time Unit and Industrial Communication Subsystem
+ (PRU-ICSS a.k.a. PRUSS) is present on various TI SoCs such as AM335x, AM437x,
+ Keystone 66AK2G, OMAP-L138/DA850 etc. A PRUSS consists of dual 32-bit RISC
+ cores (Programmable Real-Time Units, or PRUs), shared RAM, data and
+ instruction RAMs, some internal peripheral modules to facilitate industrial
+ communication, and an interrupt controller.
+
+ The programmable nature of the PRUs provide flexibility to implement custom
+ peripheral interfaces, fast real-time responses, or specialized data handling.
+ The common peripheral modules include the following,
+ - an Ethernet MII_RT module with two MII ports
+ - an MDIO port to control external Ethernet PHYs
+ - an Industrial Ethernet Peripheral (IEP) to manage/generate Industrial
+ Ethernet functions
+ - an Enhanced Capture Module (eCAP)
+ - an Industrial Ethernet Timer with 7/9 capture and 16 compare events
+ - a 16550-compatible UART to support PROFIBUS
+ - Enhanced GPIO with async capture and serial support
+
+ A PRU-ICSS subsystem can have up to three shared data memories. A PRU core
+ acts on a primary Data RAM (there are usually 2 Data RAMs) at its address
+ 0x0, but also has access to a secondary Data RAM (primary to the other PRU
+ core) at its address 0x2000. A shared Data RAM, if present, can be accessed
+ by both the PRU cores. The Interrupt Controller (INTC) and a CFG module are
+ common to both the PRU cores. Each PRU core also has a private instruction
+ RAM, and specific register spaces for Control and Debug functionalities.
+
+ Various sub-modules within a PRU-ICSS subsystem are represented as individual
+ nodes and are defined using a parent-child hierarchy depending on their
+ integration within the IP and the SoC. These nodes are described in the
+ following sections.
+
+
+ PRU-ICSS Node
+ ==============
+ Each PRU-ICSS instance is represented as its own node with the individual PRU
+ processor cores, the memories node, an INTC node and an MDIO node represented
+ as child nodes within this PRUSS node. This node shall be a child of the
+ corresponding interconnect bus nodes or target-module nodes.
+
+ See ../../mfd/syscon.yaml for generic SysCon binding details.
+
+
+properties:
+ $nodename:
+ pattern: "^(pruss|icssg)@[0-9a-f]+$"
+
+ compatible:
+ enum:
+ - ti,am3356-pruss # for AM335x SoC family
+ - ti,am4376-pruss0 # for AM437x SoC family and PRUSS unit 0
+ - ti,am4376-pruss1 # for AM437x SoC family and PRUSS unit 1
+ - ti,am5728-pruss # for AM57xx SoC family
+ - ti,k2g-pruss # for 66AK2G SoC family
+ - ti,am654-icssg # for K3 AM65x SoC family
+ - ti,j721e-icssg # for K3 J721E SoC family
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges:
+ maxItems: 1
+
+ power-domains:
+ description: |
+ This property is as per sci-pm-domain.txt.
+
+patternProperties:
+
+ memories@[a-f0-9]+$:
+ description: |
+ The various Data RAMs within a single PRU-ICSS unit are represented as a
+ single node with the name 'memories'.
+
+ type: object
+
+ properties:
+ reg:
+ minItems: 2 # On AM437x one of two PRUSS units don't contain Shared RAM.
+ maxItems: 3
+ items:
+ - description: Address and size of the Data RAM0.
+ - description: Address and size of the Data RAM1.
+ - description: |
+ Address and size of the Shared Data RAM. Note that on AM437x one
+ of two PRUSS units don't contain Shared RAM, while the second one
+ has it.
+
+ reg-names:
+ minItems: 2
+ maxItems: 3
+ items:
+ - const: dram0
+ - const: dram1
+ - const: shrdram2
+
+ required:
+ - reg
+ - reg-names
+
+ additionalProperties: false
+
+ cfg@[a-f0-9]+$:
+ description: |
+ PRU-ICSS configuration space. CFG sub-module represented as a SysCon.
+
+ type: object
+
+ properties:
+ compatible:
+ items:
+ - const: ti,pruss-cfg
+ - const: syscon
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ ranges:
+ maxItems: 1
+
+ clocks:
+ type: object
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ patternProperties:
+ coreclk-mux@[a-f0-9]+$:
+ description: |
+ This is applicable only for ICSSG (K3 SoCs). The ICSSG modules
+ core clock can be set to one of the 2 sources: ICSSG_CORE_CLK or
+ ICSSG_ICLK. This node models this clock mux and should have the
+ name "coreclk-mux".
+
+ type: object
+
+ properties:
+ '#clock-cells':
+ const: 0
+
+ clocks:
+ items:
+ - description: ICSSG_CORE Clock
+ - description: ICSSG_ICLK Clock
+
+ assigned-clocks:
+ maxItems: 1
+
+ assigned-clock-parents:
+ maxItems: 1
+ description: |
+ Standard assigned-clocks-parents definition used for selecting
+ mux parent (one of the mux input).
+
+ reg:
+ maxItems: 1
+
+ required:
+ - clocks
+
+ additionalProperties: false
+
+ iepclk-mux@[a-f0-9]+$:
+ description: |
+ The IEP module can get its clock from 2 sources: ICSSG_IEP_CLK or
+ CORE_CLK (OCP_CLK in older SoCs). This node models this clock
+ mux and should have the name "iepclk-mux".
+
+ type: object
+
+ properties:
+ '#clock-cells':
+ const: 0
+
+ clocks:
+ items:
+ - description: ICSSG_IEP Clock
+ - description: Core Clock (OCP Clock in older SoCs)
+
+ assigned-clocks:
+ maxItems: 1
+
+ assigned-clock-parents:
+ maxItems: 1
+ description: |
+ Standard assigned-clocks-parents definition used for selecting
+ mux parent (one of the mux input).
+
+ reg:
+ maxItems: 1
+
+ required:
+ - clocks
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+ iep@[a-f0-9]+$:
+ description: |
+ Industrial Ethernet Peripheral to manage/generate Industrial Ethernet
+ functions such as time stamping. Each PRUSS has either 1 IEP (on AM335x,
+ AM437x, AM57xx & 66AK2G SoCs) or 2 IEPs (on K3 AM65x & J721E SoCs ). IEP
+ is used for creating PTP clocks and generating PPS signals.
+
+ type: object
+
+ mii-rt@[a-f0-9]+$:
+ description: |
+ Real-Time Ethernet to support multiple industrial communication protocols.
+ MII-RT sub-module represented as a SysCon.
+
+ type: object
+
+ properties:
+ compatible:
+ items:
+ - const: ti,pruss-mii
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ additionalProperties: false
+
+ mii-g-rt@[a-f0-9]+$:
+ description: |
+ The Real-time Media Independent Interface to support multiple industrial
+ communication protocols (G stands for Gigabit). MII-G-RT sub-module
+ represented as a SysCon.
+
+ type: object
+
+ properties:
+ compatible:
+ items:
+ - const: ti,pruss-mii-g
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ additionalProperties: false
+
+ interrupt-controller@[a-f0-9]+$:
+ description: |
+ PRUSS INTC Node. Each PRUSS has a single interrupt controller instance
+ that is common to all the PRU cores. This should be represented as an
+ interrupt-controller node.
+
+ type: object
+
+ mdio@[a-f0-9]+$:
+ description: |
+ MDIO Node. Each PRUSS has an MDIO module that can be used to control
+ external PHYs. The MDIO module used within the PRU-ICSS is an instance of
+ the MDIO Controller used in TI Davinci SoCs.
+
+ allOf:
+ - $ref: /schemas/net/ti,davinci-mdio.yaml#
+
+ type: object
+
+ "^(pru|rtu|txpru)@[0-9a-f]+$":
+ description: |
+ PRU Node. Each PRUSS has dual PRU cores, each represented as a RemoteProc
+ device through a PRU child node each. Each node can optionally be rendered
+ inactive by using the standard DT string property, "status". The ICSSG IP
+ present on K3 SoCs have additional auxiliary PRU cores with slightly
+ different IP integration.
+
+ type: object
+
+required:
+ - compatible
+ - reg
+ - ranges
+
+additionalProperties: false
+
+# Due to inability of correctly verifying sub-nodes with an @address through
+# the "required" list, the required sub-nodes below are commented out for now.
+
+#required:
+# - memories
+# - interrupt-controller
+# - pru
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,k2g-pruss
+ - ti,am654-icssg
+ - ti,j721e-icssg
+then:
+ required:
+ - power-domains
+
+examples:
+ - |
+
+ /* Example 1 AM33xx PRU-ICSS */
+ pruss: pruss@0 {
+ compatible = "ti,am3356-pruss";
+ reg = <0x0 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pruss_mem: memories@0 {
+ reg = <0x0 0x2000>,
+ <0x2000 0x2000>,
+ <0x10000 0x3000>;
+ reg-names = "dram0", "dram1", "shrdram2";
+ };
+
+ pruss_cfg: cfg@26000 {
+ compatible = "ti,pruss-cfg", "syscon";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x26000 0x2000>;
+ ranges = <0x00 0x26000 0x2000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pruss_iepclk_mux: iepclk-mux@30 {
+ reg = <0x30>;
+ #clock-cells = <0>;
+ clocks = <&l3_gclk>, /* icss_iep */
+ <&pruss_ocp_gclk>; /* icss_ocp */
+ };
+ };
+ };
+
+ pruss_mii_rt: mii-rt@32000 {
+ compatible = "ti,pruss-mii", "syscon";
+ reg = <0x32000 0x58>;
+ };
+
+ pruss_mdio: mdio@32400 {
+ compatible = "ti,davinci_mdio";
+ reg = <0x32400 0x90>;
+ clocks = <&dpll_core_m4_ck>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ - |
+
+ /* Example 2 AM43xx PRU-ICSS with PRUSS1 node */
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pruss1: pruss@0 {
+ compatible = "ti,am4376-pruss1";
+ reg = <0x0 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pruss1_mem: memories@0 {
+ reg = <0x0 0x2000>,
+ <0x2000 0x2000>,
+ <0x10000 0x8000>;
+ reg-names = "dram0", "dram1", "shrdram2";
+ };
+
+ pruss1_cfg: cfg@26000 {
+ compatible = "ti,pruss-cfg", "syscon";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x26000 0x2000>;
+ ranges = <0x00 0x26000 0x2000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pruss1_iepclk_mux: iepclk-mux@30 {
+ reg = <0x30>;
+ #clock-cells = <0>;
+ clocks = <&sysclk_div>, /* icss_iep */
+ <&pruss_ocp_gclk>; /* icss_ocp */
+ };
+ };
+ };
+
+ pruss1_mii_rt: mii-rt@32000 {
+ compatible = "ti,pruss-mii", "syscon";
+ reg = <0x32000 0x58>;
+ };
+
+ pruss1_mdio: mdio@32400 {
+ compatible = "ti,davinci_mdio";
+ reg = <0x32400 0x90>;
+ clocks = <&dpll_core_m4_ck>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
index f582593..6ebcbc1 100644
--- a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
+++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
@@ -33,6 +33,9 @@
- const: allwinner,sun4i-a10-system-control
- const: allwinner,sun8i-a23-system-control
- const: allwinner,sun8i-h3-system-control
+ - items:
+ - const: allwinner,sun8i-r40-system-control
+ - const: allwinner,sun4i-a10-system-control
- const: allwinner,sun50i-a64-sram-controller
deprecated: true
- const: allwinner,sun50i-a64-system-control
@@ -87,6 +90,9 @@
- const: allwinner,sun8i-h3-sram-c1
- const: allwinner,sun4i-a10-sram-c1
- items:
+ - const: allwinner,sun8i-r40-sram-c1
+ - const: allwinner,sun4i-a10-sram-c1
+ - items:
- const: allwinner,sun50i-a64-sram-c1
- const: allwinner,sun4i-a10-sram-c1
- items:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index ad38504..2735be1 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -179,6 +179,8 @@
description: CALAO Systems SAS
"^calxeda,.*":
description: Calxeda
+ "^caninos,.*":
+ description: Caninos Loucos Program
"^capella,.*":
description: Capella Microsystems, Inc
"^cascoda,.*":
@@ -912,6 +914,8 @@
description: Ronbo Electronics
"^roofull,.*":
description: Shenzhen Roofull Technology Co, Ltd
+ "^roseapplepi,.*":
+ description: RoseapplePi.org
"^samsung,.*":
description: Samsung Semiconductor
"^samtec,.*":
@@ -928,6 +932,8 @@
description: Schindler
"^seagate,.*":
description: Seagate Technology PLC
+ "^seeed,.*":
+ description: Seeed Technology Co., Ltd
"^seirobotics,.*":
description: Shenzhen SEI Robotics Co., Ltd
"^semtech,.*":
@@ -1222,6 +1228,10 @@
description: Shenzhen Zidoo Technology Co., Ltd.
"^zii,.*":
description: Zodiac Inflight Innovations
+ "^zinitix,.*":
+ description: Zinitix Co., Ltd
+ "^zkmagic,.*":
+ description: Shenzhen Zkmagic Technology Co., Ltd.
"^zte,.*":
description: ZTE Corp.
"^zyxel,.*":
diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
index 987d6e7..f357f3e 100644
--- a/Documentation/driver-api/index.rst
+++ b/Documentation/driver-api/index.rst
@@ -77,7 +77,6 @@
console
dcdbas
eisa
- ipmb
isa
isapnp
io-mapping
diff --git a/Documentation/fault-injection/provoke-crashes.rst b/Documentation/fault-injection/provoke-crashes.rst
index 9279a3e..a20ba5d 100644
--- a/Documentation/fault-injection/provoke-crashes.rst
+++ b/Documentation/fault-injection/provoke-crashes.rst
@@ -1,16 +1,19 @@
-===============
-Provoke crashes
-===============
+.. SPDX-License-Identifier: GPL-2.0
-The lkdtm module provides an interface to crash or injure the kernel at
-predefined crashpoints to evaluate the reliability of crash dumps obtained
-using different dumping solutions. The module uses KPROBEs to instrument
-crashing points, but can also crash the kernel directly without KRPOBE
-support.
+============================================================
+Provoking crashes with Linux Kernel Dump Test Module (LKDTM)
+============================================================
+The lkdtm module provides an interface to disrupt (and usually crash)
+the kernel at predefined code locations to evaluate the reliability of
+the kernel's exception handling and to test crash dumps obtained using
+different dumping solutions. The module uses KPROBEs to instrument the
+trigger location, but can also trigger the kernel directly without KPROBE
+support via debugfs.
-You can provide the way either through module arguments when inserting
-the module, or through a debugfs interface.
+You can select the location of the trigger ("crash point name") and the
+type of action ("crash point type") either through module arguments when
+inserting the module, or through the debugfs interface.
Usage::
@@ -18,31 +21,38 @@
[cpoint_count={>0}]
recur_count
- Recursion level for the stack overflow test. Default is 10.
+ Recursion level for the stack overflow test. By default this is
+ dynamically calculated based on kernel configuration, with the
+ goal of being just large enough to exhaust the kernel stack. The
+ value can be seen at `/sys/module/lkdtm/parameters/recur_count`.
cpoint_name
- Crash point where the kernel is to be crashed. It can be
+ Where in the kernel to trigger the action. It can be
one of INT_HARDWARE_ENTRY, INT_HW_IRQ_EN, INT_TASKLET_ENTRY,
FS_DEVRW, MEM_SWAPOUT, TIMERADD, SCSI_DISPATCH_CMD,
- IDE_CORE_CP, DIRECT
+ IDE_CORE_CP, or DIRECT
cpoint_type
Indicates the action to be taken on hitting the crash point.
- It can be one of PANIC, BUG, EXCEPTION, LOOP, OVERFLOW,
- CORRUPT_STACK, UNALIGNED_LOAD_STORE_WRITE, OVERWRITE_ALLOCATION,
- WRITE_AFTER_FREE,
+ These are numerous, and best queried directly from debugfs. Some
+ of the common ones are PANIC, BUG, EXCEPTION, LOOP, and OVERFLOW.
+ See the contents of `/sys/kernel/debug/provoke-crash/DIRECT` for
+ a complete list.
cpoint_count
Indicates the number of times the crash point is to be hit
- to trigger an action. The default is 10.
+ before triggering the action. The default is 10 (except for
+ DIRECT, which always fires immediately).
You can also induce failures by mounting debugfs and writing the type to
-<mountpoint>/provoke-crash/<crashpoint>. E.g.::
+<debugfs>/provoke-crash/<crashpoint>. E.g.::
- mount -t debugfs debugfs /mnt
- echo EXCEPTION > /mnt/provoke-crash/INT_HARDWARE_ENTRY
+ mount -t debugfs debugfs /sys/kernel/debug
+ echo EXCEPTION > /sys/kernel/debug/provoke-crash/INT_HARDWARE_ENTRY
+The special file `DIRECT` will induce the action directly without KPROBE
+instrumentation. This mode is the only one available when the module is
+built for a kernel without KPROBEs support::
-A special file is `DIRECT` which will induce the crash directly without
-KPROBE instrumentation. This mode is the only one available when the module
-is built on a kernel without KPROBEs support.
+ # Instead of having a BUG kill your shell, have it kill "cat":
+ cat <(echo WRITE_RO) >/sys/kernel/debug/provoke-crash/DIRECT
diff --git a/Documentation/fb/fbcon.rst b/Documentation/fb/fbcon.rst
index 9aad964..57f66de 100644
--- a/Documentation/fb/fbcon.rst
+++ b/Documentation/fb/fbcon.rst
@@ -81,7 +81,7 @@
1. fbcon=font:<name>
Select the initial font to use. The value 'name' can be any of the
- compiled-in fonts: 10x18, 6x10, 7x14, Acorn8x8, MINI4x6,
+ compiled-in fonts: 10x18, 6x10, 6x8, 7x14, Acorn8x8, MINI4x6,
PEARL8x8, ProFont6x11, SUN12x22, SUN8x16, TER16x32, VGA8x16, VGA8x8.
Note, not all drivers can handle font with widths not divisible by 8,
diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst
index 837d51f..25e6673 100644
--- a/Documentation/networking/ip-sysctl.rst
+++ b/Documentation/networking/ip-sysctl.rst
@@ -1142,13 +1142,15 @@
icmp_msgs_per_sec - INTEGER
Limit maximal number of ICMP packets sent per second from this host.
Only messages whose type matches icmp_ratemask (see below) are
- controlled by this limit.
+ controlled by this limit. For security reasons, the precise count
+ of messages per second is randomized.
Default: 1000
icmp_msgs_burst - INTEGER
icmp_msgs_per_sec controls number of ICMP packets sent per second,
while icmp_msgs_burst controls the burst size of these packets.
+ For security reasons, the precise burst size is randomized.
Default: 50
diff --git a/Documentation/networking/nf_flowtable.rst b/Documentation/networking/nf_flowtable.rst
index b6e1fa1..6cdf9a1 100644
--- a/Documentation/networking/nf_flowtable.rst
+++ b/Documentation/networking/nf_flowtable.rst
@@ -109,7 +109,7 @@
This documentation is based on the LWN.net articles [1]_\ [2]_. Rafal Milecki
also made a very complete and comprehensive summary called "A state of network
acceleration" that describes how things were before this infrastructure was
-mailined [3]_ and it also makes a rough summary of this work [4]_.
+mainlined [3]_ and it also makes a rough summary of this work [4]_.
.. [1] https://lwn.net/Articles/738214/
.. [2] https://lwn.net/Articles/742164/
diff --git a/Documentation/process/deprecated.rst b/Documentation/process/deprecated.rst
index ff71d80..9d83b8d 100644
--- a/Documentation/process/deprecated.rst
+++ b/Documentation/process/deprecated.rst
@@ -106,23 +106,29 @@
strcpy()
--------
-strcpy() performs no bounds checking on the destination
-buffer. This could result in linear overflows beyond the
-end of the buffer, leading to all kinds of misbehaviors. While
-`CONFIG_FORTIFY_SOURCE=y` and various compiler flags help reduce the
-risk of using this function, there is no good reason to add new uses of
-this function. The safe replacement is strscpy().
+strcpy() performs no bounds checking on the destination buffer. This
+could result in linear overflows beyond the end of the buffer, leading to
+all kinds of misbehaviors. While `CONFIG_FORTIFY_SOURCE=y` and various
+compiler flags help reduce the risk of using this function, there is
+no good reason to add new uses of this function. The safe replacement
+is strscpy(), though care must be given to any cases where the return
+value of strcpy() was used, since strscpy() does not return a pointer to
+the destination, but rather a count of non-NUL bytes copied (or negative
+errno when it truncates).
strncpy() on NUL-terminated strings
-----------------------------------
-Use of strncpy() does not guarantee that the destination buffer
-will be NUL terminated. This can lead to various linear read overflows
-and other misbehavior due to the missing termination. It also NUL-pads the
-destination buffer if the source contents are shorter than the destination
-buffer size, which may be a needless performance penalty for callers using
-only NUL-terminated strings. The safe replacement is strscpy().
-(Users of strscpy() still needing NUL-padding should instead
-use strscpy_pad().)
+Use of strncpy() does not guarantee that the destination buffer will
+be NUL terminated. This can lead to various linear read overflows and
+other misbehavior due to the missing termination. It also NUL-pads
+the destination buffer if the source contents are shorter than the
+destination buffer size, which may be a needless performance penalty
+for callers using only NUL-terminated strings. The safe replacement is
+strscpy(), though care must be given to any cases where the return value
+of strncpy() was used, since strscpy() does not return a pointer to the
+destination, but rather a count of non-NUL bytes copied (or negative
+errno when it truncates). Any cases still needing NUL-padding should
+instead use strscpy_pad().
If a caller is using non-NUL-terminated strings, strncpy() can
still be used, but destinations should be marked with the `__nonstring
@@ -131,10 +137,12 @@
strlcpy()
---------
-strlcpy() reads the entire source buffer first, possibly exceeding
-the given limit of bytes to copy. This is inefficient and can lead to
-linear read overflows if a source string is not NUL-terminated. The
-safe replacement is strscpy().
+strlcpy() reads the entire source buffer first (since the return value
+is meant to match that of strlen()). This read may exceed the destination
+size limit. This is both inefficient and can lead to linear read overflows
+if a source string is not NUL-terminated. The safe replacement is strscpy(),
+though care must be given to any cases where the return value of strlcpy()
+is used, since strscpy() will return negative errno values when it truncates.
%p format specifier
-------------------
diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst
index 58586ff..83d9a82 100644
--- a/Documentation/process/submitting-patches.rst
+++ b/Documentation/process/submitting-patches.rst
@@ -527,6 +527,13 @@
understand the subject area and to perform thorough reviews, will normally
increase the likelihood of your patch getting into the kernel.
+Both Tested-by and Reviewed-by tags, once received on mailing list from tester
+or reviewer, should be added by author to the applicable patches when sending
+next versions. However if the patch has changed substantially in following
+version, these tags might not be applicable anymore and thus should be removed.
+Usually removal of someone's Tested-by or Reviewed-by tags should be mentioned
+in the patch changelog (after the '---' separator).
+
A Suggested-by: tag indicates that the patch idea is suggested by the person
named and ensures credit to the person for the idea. Please note that this
tag should not be added without the reporter's permission, especially if the
diff --git a/Documentation/translations/zh_CN/arm64/hugetlbpage.rst b/Documentation/translations/zh_CN/arm64/hugetlbpage.rst
new file mode 100644
index 0000000..13304d2
--- /dev/null
+++ b/Documentation/translations/zh_CN/arm64/hugetlbpage.rst
@@ -0,0 +1,45 @@
+.. include:: ../disclaimer-zh_CN.rst
+
+:Original: :ref:`Documentation/arm64/hugetlbpage.rst <hugetlbpage_index>`
+
+Translator: Bailu Lin <bailu.lin@vivo.com>
+
+=====================
+ARM64中的 HugeTLBpage
+=====================
+
+大页依靠有效利用 TLBs 来提高地址翻译的性能。这取决于以下
+两点 -
+
+ - 大页的大小
+ - TLBs 支持的条目大小
+
+ARM64 接口支持2种大页方式。
+
+1) pud/pmd 级别的块映射
+-----------------------
+
+这是常规大页，他们的 pmd 或 pud 页面表条目指向一个内存块。
+不管 TLB 中支持的条目大小如何，块映射可以减少翻译大页地址
+所需遍历的页表深度。
+
+2) 使用连续位
+-------------
+
+架构中转换页表条目(D4.5.3, ARM DDI 0487C.a)中提供一个连续
+位告诉 MMU 这个条目是一个连续条目集的一员，它可以被缓存在单
+个 TLB 条目中。
+
+在 Linux 中连续位用来增加 pmd 和 pte(最后一级)级别映射的大
+小。受支持的连续页表条目数量因页面大小和页表级别而异。
+
+
+支持以下大页尺寸配置 -
+
+ ====== ======== ==== ======== ===
+ - CONT PTE PMD CONT PMD PUD
+ ====== ======== ==== ======== ===
+ 4K: 64K 2M 32M 1G
+ 16K: 2M 32M 1G
+ 64K: 2M 512M 16G
+ ====== ======== ==== ======== ===
diff --git a/Documentation/translations/zh_CN/arm64/index.rst b/Documentation/translations/zh_CN/arm64/index.rst
index 646ed1f..e31a609 100644
--- a/Documentation/translations/zh_CN/arm64/index.rst
+++ b/Documentation/translations/zh_CN/arm64/index.rst
@@ -14,3 +14,4 @@
:maxdepth: 2
amu
+ hugetlbpage
diff --git a/Documentation/vm/mmu_notifier.rst b/Documentation/vm/mmu_notifier.rst
index 47baa1c..df5d777 100644
--- a/Documentation/vm/mmu_notifier.rst
+++ b/Documentation/vm/mmu_notifier.rst
@@ -89,7 +89,7 @@
So here because at time N+2 the clear page table entry was not pair with a
notification to invalidate the secondary TLB, the device see the new value for
-addrB before seing the new value for addrA. This break total memory ordering
+addrB before seeing the new value for addrA. This break total memory ordering
for the device.
When changing a pte to write protect or to point to a new write protected page
diff --git a/Documentation/vm/page_migration.rst b/Documentation/vm/page_migration.rst
index 91a98a6..db9d7e5 100644
--- a/Documentation/vm/page_migration.rst
+++ b/Documentation/vm/page_migration.rst
@@ -99,7 +99,7 @@
2. Ensure that writeback is complete.
3. Lock the new page that we want to move to. It is locked so that accesses to
- this (not yet uptodate) page immediately block while the move is in progress.
+ this (not yet up-to-date) page immediately block while the move is in progress.
4. All the page table references to the page are converted to migration
entries. This decreases the mapcount of a page. If the resulting
diff --git a/Documentation/vm/page_owner.rst b/Documentation/vm/page_owner.rst
index 079f3f8..02deac7 100644
--- a/Documentation/vm/page_owner.rst
+++ b/Documentation/vm/page_owner.rst
@@ -18,7 +18,7 @@
using it for analyzing who allocate each page is rather complex. We need
to enlarge the trace buffer for preventing overlapping until userspace
program launched. And, launched program continually dump out the trace
-buffer for later analysis and it would change system behviour with more
+buffer for later analysis and it would change system behaviour with more
possibility rather than just keeping it in memory, so bad for debugging.
page owner can also be used for various purposes. For example, accurate
diff --git a/Documentation/vm/slub.rst b/Documentation/vm/slub.rst
index 289d231..03f294a 100644
--- a/Documentation/vm/slub.rst
+++ b/Documentation/vm/slub.rst
@@ -378,7 +378,7 @@
can go unnoticed. To deal with that, ``slabinfo-gnuplot.sh`` has two
options to 'zoom-in'/'zoom-out':
- a) ``-s %d,%d`` -- overwrites the default image width and heigh
+ a) ``-s %d,%d`` -- overwrites the default image width and height
b) ``-r %d,%d`` -- specifies a range of samples to use (for example,
in ``slabinfo -X >> FOO_STATS; sleep 1;`` case, using a ``-r
40,60`` range will plot only samples collected between 40th and
diff --git a/Documentation/x86/x86_64/mm.rst b/Documentation/x86/x86_64/mm.rst
index e505340..ede1875 100644
--- a/Documentation/x86/x86_64/mm.rst
+++ b/Documentation/x86/x86_64/mm.rst
@@ -19,7 +19,7 @@
Note that as we get closer to the top of the address space, the notation changes
from TB to GB and then MB/KB.
- - "16M TB" might look weird at first sight, but it's an easier to visualize size
+ - "16M TB" might look weird at first sight, but it's an easier way to visualize size
notation than "16 EB", which few will recognize at first sight as 16 exabytes.
It also shows it nicely how incredibly large 64-bit address space is.
diff --git a/MAINTAINERS b/MAINTAINERS
index 94e06c9..e73636b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2115,6 +2115,7 @@
M: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
+T: git git://github.com/microchip-ung/linux-upstream.git
F: arch/arm64/boot/dts/microchip/
N: sparx5
@@ -2130,9 +2131,7 @@
S: Maintained
W: http://linux-chenxing.org/
F: Documentation/devicetree/bindings/arm/mstar/*
-F: arch/arm/boot/dts/infinity*.dtsi
-F: arch/arm/boot/dts/mercury*.dtsi
-F: arch/arm/boot/dts/mstar-v7.dtsi
+F: arch/arm/boot/dts/mstar-*
F: arch/arm/mach-mstar/
ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
@@ -2199,8 +2198,8 @@
L: openmoko-kernel@lists.openmoko.org (subscribers-only)
S: Orphan
W: http://wiki.openmoko.org/wiki/Neo_FreeRunner
-F: arch/arm/mach-s3c24xx/gta02.h
-F: arch/arm/mach-s3c24xx/mach-gta02.c
+F: arch/arm/mach-s3c/gta02.h
+F: arch/arm/mach-s3c/mach-gta02.c
ARM/Orion SoC/Technologic Systems TS-78xx platform support
M: Alexander Clouter <alex@digriz.org.uk>
@@ -2379,7 +2378,7 @@
M: Kukjin Kim <kgene@kernel.org>
M: Krzysztof Kozlowski <krzk@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+L: linux-samsung-soc@vger.kernel.org
S: Maintained
Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/
F: Documentation/arm/samsung/
@@ -2389,10 +2388,8 @@
F: arch/arm/boot/dts/s3c*
F: arch/arm/boot/dts/s5p*
F: arch/arm/mach-exynos*/
-F: arch/arm/mach-s3c24*/
-F: arch/arm/mach-s3c64xx/
+F: arch/arm/mach-s3c/
F: arch/arm/mach-s5p*/
-F: arch/arm/plat-samsung/
F: arch/arm64/boot/dts/exynos/
F: drivers/*/*/*s3c24*
F: drivers/*/*s3c24*
@@ -2403,6 +2400,9 @@
F: drivers/tty/serial/samsung*
F: include/linux/soc/samsung/
N: exynos
+N: s3c2410
+N: s3c64xx
+N: s5pv210
ARM/SAMSUNG MOBILE MACHINE SUPPORT
M: Kyungmin Park <kyungmin.park@samsung.com>
@@ -2421,7 +2421,7 @@
ARM/SAMSUNG S5P SERIES HDMI CEC SUBSYSTEM SUPPORT
M: Marek Szyprowski <m.szyprowski@samsung.com>
-L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+L: linux-samsung-soc@vger.kernel.org
L: linux-media@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/media/s5p-cec.txt
@@ -2615,7 +2615,7 @@
M: Nishanth Menon <nm@ti.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
-F: Documentation/devicetree/bindings/arm/ti/k3.txt
+F: Documentation/devicetree/bindings/arm/ti/k3.yaml
F: arch/arm64/boot/dts/ti/Makefile
F: arch/arm64/boot/dts/ti/k3-*
F: include/dt-bindings/pinctrl/k3.h
@@ -2630,6 +2630,17 @@
M: Dirk Opfer <dirk@opfer-online.de>
S: Maintained
+ARM/TOSHIBA VISCONTI ARCHITECTURE
+M: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Supported
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti.git
+F: Documentation/devicetree/bindings/arm/toshiba.yaml
+F: Documentation/devicetree/bindings/pinctrl/toshiba,tmpv7700-pinctrl.yaml
+F: arch/arm64/boot/dts/toshiba/
+F: drivers/pinctrl/visconti/
+N: visconti
+
ARM/UNIPHIER ARCHITECTURE
M: Masahiro Yamada <yamada.masahiro@socionext.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -3244,7 +3255,8 @@
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Supported
-Q: https://patchwork.ozlabs.org/project/netdev/list/?delegate=77147
+W: https://bpf.io/
+Q: https://patchwork.kernel.org/project/netdevbpf/list/?delegate=121173
T: git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git
F: Documentation/bpf/
@@ -3414,7 +3426,7 @@
L: linux-arm-kernel@lists.infradead.org
S: Maintained
F: arch/arm/boot/dts/bcm470*
-F: arch/arm/boot/dts/bcm5301x*.dtsi
+F: arch/arm/boot/dts/bcm5301*
F: arch/arm/boot/dts/bcm953012*
F: arch/arm/mach-bcm/bcm_5301x.c
@@ -3480,6 +3492,7 @@
F: arch/mips/boot/dts/brcm/bcm*.dts*
F: arch/mips/include/asm/mach-bmips/*
F: arch/mips/kernel/*bmips*
+F: drivers/soc/bcm/bcm63xx
F: drivers/irqchip/irq-bcm63*
F: drivers/irqchip/irq-bcm7*
F: drivers/irqchip/irq-brcmstb*
@@ -4584,6 +4597,14 @@
S: Supported
F: drivers/cpuidle/cpuidle-psci.c
+CPUIDLE DRIVER - ARM PSCI PM DOMAIN
+M: Ulf Hansson <ulf.hansson@linaro.org>
+L: linux-pm@vger.kernel.org
+L: linux-arm-kernel@lists.infradead.org
+S: Supported
+F: drivers/cpuidle/cpuidle-psci.h
+F: drivers/cpuidle/cpuidle-psci-domain.c
+
CRAMFS FILESYSTEM
M: Nicolas Pitre <nico@fluxnic.net>
S: Maintained
@@ -5397,11 +5418,11 @@
F: include/linux/kobj*
F: lib/kobj*
-DRIVERS FOR ADAPTIVE VOLTAGE SCALING (AVS)
+DRIVERS FOR OMAP ADAPTIVE VOLTAGE SCALING (AVS)
M: Nishanth Menon <nm@ti.com>
L: linux-pm@vger.kernel.org
S: Maintained
-F: drivers/power/avs/
+F: drivers/soc/ti/smartreflex.c
F: include/linux/power/smartreflex.h
DRM DRIVER FOR ALLWINNER DE2 AND DE3 ENGINE
@@ -13438,7 +13459,7 @@
M: Jingoo Han <jingoohan1@gmail.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+L: linux-samsung-soc@vger.kernel.org
S: Maintained
F: drivers/pci/controller/dwc/pci-exynos.c
@@ -13845,7 +13866,7 @@
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+L: linux-samsung-soc@vger.kernel.org
S: Maintained
Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung.git
@@ -14458,7 +14479,7 @@
L: linux-arm-msm@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
-F: drivers/power/avs/qcom-cpr.c
+F: drivers/soc/qcom/cpr.c
QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096
M: Ilia Lin <ilia.lin@kernel.org>
@@ -15406,7 +15427,7 @@
SAMSUNG S3C24XX/S3C64XX SOC SERIES CAMIF DRIVER
M: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
L: linux-media@vger.kernel.org
-L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+L: linux-samsung-soc@vger.kernel.org
S: Maintained
F: drivers/media/platform/s3c-camif/
F: include/media/drv-intf/s3c_camif.h
@@ -15456,7 +15477,7 @@
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
M: Tomasz Figa <tomasz.figa@gmail.com>
M: Chanwoo Choi <cw00.choi@samsung.com>
-L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+L: linux-samsung-soc@vger.kernel.org
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk.git
F: Documentation/devicetree/bindings/clock/exynos*.txt
@@ -15464,17 +15485,20 @@
F: Documentation/devicetree/bindings/clock/samsung,s5p*
F: drivers/clk/samsung/
F: include/dt-bindings/clock/exynos*.h
+F: include/linux/clk/samsung.h
+F: include/linux/platform_data/clk-s3c2410.h
SAMSUNG SPI DRIVERS
M: Kukjin Kim <kgene@kernel.org>
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Andi Shyti <andi@etezian.org>
L: linux-spi@vger.kernel.org
-L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+L: linux-samsung-soc@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/spi/spi-samsung.txt
F: drivers/spi/spi-s3c*
F: include/linux/platform_data/spi-s3c64xx.h
+F: include/linux/spi/s3c24xx-fiq.h
SAMSUNG SXGBE DRIVERS
M: Byungho An <bh74.an@samsung.com>
@@ -15992,19 +16016,17 @@
F: include/linux/platform_data/simplefb.h
SIMTEC EB110ATX (Chalice CATS)
-M: Vincent Sanders <vince@simtec.co.uk>
M: Simtec Linux Team <linux@simtec.co.uk>
S: Supported
W: http://www.simtec.co.uk/products/EB110ATX/
SIMTEC EB2410ITX (BAST)
-M: Vincent Sanders <vince@simtec.co.uk>
M: Simtec Linux Team <linux@simtec.co.uk>
S: Supported
W: http://www.simtec.co.uk/products/EB2410ITX/
-F: arch/arm/mach-s3c24xx/bast-ide.c
-F: arch/arm/mach-s3c24xx/bast-irq.c
-F: arch/arm/mach-s3c24xx/mach-bast.c
+F: arch/arm/mach-s3c/bast-ide.c
+F: arch/arm/mach-s3c/bast-irq.c
+F: arch/arm/mach-s3c/mach-bast.c
SIOX
M: Thorsten Scherer <t.scherer@eckelmann.de>
@@ -16043,6 +16065,13 @@
F: drivers/video/fbdev/sis/
F: include/video/sisfb.h
+SIS I2C TOUCHSCREEN DRIVER
+M: Mika Penttilä <mika.penttila@nextfour.com>
+L: linux-input@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt
+F: drivers/input/touchscreen/sis_i2c.c
+
SIS USB2VGA DRIVER
M: Thomas Winischhofer <thomas@winischhofer.net>
S: Maintained
@@ -18936,7 +18965,7 @@
F: Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
F: Documentation/devicetree/bindings/sound/wlf,arizona.yaml
F: Documentation/hwmon/wm83??.rst
-F: arch/arm/mach-s3c64xx/mach-crag6410*
+F: arch/arm/mach-s3c/mach-crag6410*
F: drivers/clk/clk-wm83*.c
F: drivers/extcon/extcon-arizona.c
F: drivers/gpio/gpio-*wm*.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c18fa9d..fe2f17eb2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -268,9 +268,7 @@
depends on !ARM_PATCH_PHYS_VIRT
default DRAM_BASE if !MMU
default 0x00000000 if ARCH_EBSA110 || \
- ARCH_FOOTBRIDGE || \
- ARCH_INTEGRATOR || \
- ARCH_REALVIEW
+ ARCH_FOOTBRIDGE
default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
default 0x20000000 if ARCH_S5PV210
default 0xc0000000 if ARCH_SA1100
@@ -506,11 +504,12 @@
select GPIOLIB
select GENERIC_IRQ_MULTI_HANDLER
select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select NEED_MACH_IO_H
+ select S3C2410_WATCHDOG
select SAMSUNG_ATAGS
select USE_OF
+ select WATCHDOG
help
Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
@@ -639,7 +638,6 @@
source "arch/arm/mach-ep93xx/Kconfig"
source "arch/arm/mach-exynos/Kconfig"
-source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/mach-footbridge/Kconfig"
@@ -712,9 +710,7 @@
source "arch/arm/mach-rockchip/Kconfig"
-source "arch/arm/mach-s3c24xx/Kconfig"
-
-source "arch/arm/mach-s3c64xx/Kconfig"
+source "arch/arm/mach-s3c/Kconfig"
source "arch/arm/mach-s5pv210/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 87912e5..8986a91 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1005,7 +1005,7 @@
via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
config DEBUG_S3C_UART0
- depends on PLAT_SAMSUNG
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
@@ -1017,7 +1017,7 @@
by the boot-loader before use.
config DEBUG_S3C_UART1
- depends on PLAT_SAMSUNG
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
@@ -1029,7 +1029,7 @@
by the boot-loader before use.
config DEBUG_S3C_UART2
- depends on PLAT_SAMSUNG
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
@@ -1041,7 +1041,7 @@
by the boot-loader before use.
config DEBUG_S3C_UART3
- depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210)
+ depends on ARCH_EXYNOS || ARCH_S5PV210
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
@@ -1086,6 +1086,14 @@
on SA-11x0 UART ports. The kernel will check for the first
enabled UART in a sequence 3-1-2.
+ config DEBUG_SD5203_UART
+ bool "Hisilicon SD5203 Debug UART"
+ depends on ARCH_SD5203
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on SD5203 UART.
+
config DEBUG_SOCFPGA_UART0
depends on ARCH_SOCFPGA
bool "Use SOCFPGA UART0 for low-level debug"
@@ -1497,6 +1505,16 @@
config DEBUG_S5PV210_UART
bool
+config DEBUG_S3C_UART
+ depends on DEBUG_S3C2410_UART || DEBUG_S3C24XX_UART || \
+ DEBUG_S3C64XX_UART || DEBUG_S5PV210_UART || \
+ DEBUG_EXYNOS_UART
+ int
+ default "0" if DEBUG_S3C_UART0
+ default "1" if DEBUG_S3C_UART1
+ default "2" if DEBUG_S3C_UART2
+ default "3" if DEBUG_S3C_UART3
+
config DEBUG_OMAP2PLUS_UART
bool
depends on ARCH_OMAP2PLUS
@@ -1650,6 +1668,7 @@
default 0x11006000 if DEBUG_MT6589_UART0
default 0x11009000 if DEBUG_MT8135_UART3
default 0x16000000 if DEBUG_INTEGRATOR
+ default 0x1600d000 if DEBUG_SD5203_UART
default 0x18000300 if DEBUG_BCM_5301X
default 0x18000400 if DEBUG_BCM_HR2
default 0x18010000 if DEBUG_SIRFATLAS7_UART0
@@ -1852,7 +1871,7 @@
default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1
default 0xfec90000 if DEBUG_RK32_UART2
default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
- default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
+ default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART
default 0xfed60000 if DEBUG_RK29_UART0
default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 2874cd9..4d76eab 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -212,8 +212,7 @@
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_ARCH_RPC) += rpc
-machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx
-machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx
+machine-$(CONFIG_PLAT_SAMSUNG) += s3c
machine-$(CONFIG_ARCH_S5PV210) += s5pv210
machine-$(CONFIG_ARCH_SA1100) += sa1100
machine-$(CONFIG_ARCH_RENESAS) += shmobile
@@ -235,13 +234,9 @@
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_EXYNOS) += samsung
plat-$(CONFIG_ARCH_OMAP) += omap
-plat-$(CONFIG_ARCH_S3C64XX) += samsung
-plat-$(CONFIG_ARCH_S5PV210) += samsung
plat-$(CONFIG_PLAT_ORION) += orion
plat-$(CONFIG_PLAT_PXA) += pxa
-plat-$(CONFIG_PLAT_S3C24XX) += samsung
plat-$(CONFIG_PLAT_VERSATILE) += versatile
ifeq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4572db3f..ce66ffd 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -43,6 +43,7 @@
at91-smartkiz.dtb \
at91-wb45n.dtb \
at91sam9g15ek.dtb \
+ at91sam9g25-gardena-smart-gateway.dtb \
at91sam9g25ek.dtb \
at91sam9g35ek.dtb \
at91sam9x25ek.dtb \
@@ -127,6 +128,7 @@
bcm47094-luxul-xwr-3150-v1.dtb \
bcm47094-netgear-r8500.dtb \
bcm47094-phicomm-k3.dtb \
+ bcm53016-meraki-mr32.dtb \
bcm94708.dtb \
bcm94709.dtb \
bcm953012er.dtb \
@@ -357,6 +359,8 @@
mps2-an399.dtb
dtb-$(CONFIG_ARCH_MOXART) += \
moxart-uc7112lx.dtb
+dtb-$(CONFIG_ARCH_SD5203) += \
+ sd5203.dtb
dtb-$(CONFIG_SOC_IMX1) += \
imx1-ads.dtb \
imx1-apf9328.dtb
@@ -482,6 +486,7 @@
imx6dl-wandboard-revd1.dtb \
imx6dl-yapp4-draco.dtb \
imx6dl-yapp4-hydra.dtb \
+ imx6dl-yapp4-orion.dtb \
imx6dl-yapp4-ursa.dtb \
imx6q-apalis-eval.dtb \
imx6q-apalis-ixora.dtb \
@@ -531,6 +536,7 @@
imx6q-icore-ofcap12.dtb \
imx6q-icore-rqs.dtb \
imx6q-kp-tpc.dtb \
+ imx6q-logicpd.dtb \
imx6q-marsboard.dtb \
imx6q-mccmon6.dtb \
imx6q-nitrogen6x.dtb \
@@ -585,6 +591,7 @@
imx6qp-zii-rdu2.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
imx6sl-evk.dtb \
+ imx6sl-tolino-shine2hd.dtb \
imx6sl-tolino-shine3.dtb \
imx6sl-warp.dtb
dtb-$(CONFIG_SOC_IMX6SLL) += \
@@ -868,7 +875,12 @@
dtb-$(CONFIG_ARCH_ACTIONS) += \
owl-s500-cubieboard6.dtb \
owl-s500-guitar-bb-rev-b.dtb \
+ owl-s500-labrador-base-m.dtb \
+ owl-s500-roseapplepi.dtb \
owl-s500-sparky.dtb
+dtb-$(CONFIG_ARCH_PICOXCELL) += \
+ picoxcell-pc7302-pc3x2.dtb \
+ picoxcell-pc7302-pc3x3.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += \
prima2-evb.dtb
dtb-$(CONFIG_ARCH_PXA) += \
@@ -1047,6 +1059,7 @@
stm32746g-eval.dtb \
stm32h743i-eval.dtb \
stm32h743i-disco.dtb \
+ stm32mp153c-dhcom-drc02.dtb \
stm32mp157a-avenger96.dtb \
stm32mp157a-dhcor-avenger96.dtb \
stm32mp157a-dk1.dtb \
@@ -1056,7 +1069,8 @@
stm32mp157c-dk2.dtb \
stm32mp157c-ed1.dtb \
stm32mp157c-ev1.dtb \
- stm32mp157c-lxa-mc1.dtb
+ stm32mp157c-lxa-mc1.dtb \
+ stm32mp157c-odyssey.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-ba10-tvbox.dtb \
@@ -1194,6 +1208,7 @@
sun8i-r16-parrot.dtb \
sun8i-r40-bananapi-m2-ultra.dtb \
sun8i-s3-lichee-zero-plus.dtb \
+ sun8i-s3-pinecube.dtb \
sun8i-t3-cqa3t-bv3.dtb \
sun8i-v3s-licheepi-zero.dtb \
sun8i-v3s-licheepi-zero-dock.dtb \
@@ -1356,9 +1371,9 @@
mt8135-evbp1.dtb
dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
dtb-$(CONFIG_ARCH_MSTARV7) += \
- infinity-msc313-breadbee_crust.dtb \
- infinity3-msc313e-breadbee.dtb \
- mercury5-ssc8336n-midrived08.dtb
+ mstar-infinity-msc313-breadbee_crust.dtb \
+ mstar-infinity3-msc313e-breadbee.dtb \
+ mstar-mercury5-ssc8336n-midrived08.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
@@ -1371,6 +1386,7 @@
aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-facebook-wedge40.dtb \
aspeed-bmc-facebook-wedge100.dtb \
+ aspeed-bmc-facebook-wedge400.dtb \
aspeed-bmc-facebook-yamp.dtb \
aspeed-bmc-facebook-yosemitev2.dtb \
aspeed-bmc-ibm-rainier.dtb \
@@ -1381,6 +1397,7 @@
aspeed-bmc-microsoft-olympus.dtb \
aspeed-bmc-opp-lanyang.dtb \
aspeed-bmc-opp-mihawk.dtb \
+ aspeed-bmc-opp-mowgli.dtb \
aspeed-bmc-opp-nicole.dtb \
aspeed-bmc-opp-palmetto.dtb \
aspeed-bmc-opp-romulus.dtb \
diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi
index d3036ea8..3b0675a 100644
--- a/arch/arm/boot/dts/alpine.dtsi
+++ b/arch/arm/boot/dts/alpine.dtsi
@@ -91,7 +91,7 @@ arch-timer {
};
/* Interrupt Controller */
- gic: gic@fb001000 {
+ gic: interrupt-controller@fb001000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
index cd55f11..0f07846 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -160,11 +160,15 @@ &i2c0 {
serial_config1: serial_config1@20 {
compatible = "nxp,pca9539";
reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
serial_config2: serial_config2@21 {
compatible = "nxp,pca9539";
reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
tps: tps@2d {
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
new file mode 100644
index 0000000..98d8ed4
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
@@ -0,0 +1,427 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 MOXA Inc. - https://www.moxa.com/
+ *
+ * Author: Johnson Chen <johnsonch.chen@moxa.com>
+ */
+
+#include "am33xx.dtsi"
+
+/ {
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd1_reg>;
+ };
+ };
+
+ vbat: vbat-regulator {
+ compatible = "regulator-fixed";
+ };
+
+ /* Power supply provides a fixed 3.3V @3A */
+ vmmcsd_fixed: vmmcsd-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ buttons: push_button {
+ compatible = "gpio-keys";
+ };
+
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&minipcie_pins>;
+
+ minipcie_pins: pinmux_minipcie {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2_24 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2_25 */
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2_22 Power off PIN*/
+ >;
+ };
+
+ push_button_pins: pinmux_push_button {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mcasp0_ahcklx.gpio3_21 */
+ >;
+ };
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_ctsn.i2c1_sda */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_rtsn.i2c1_scl */
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0)
+ >;
+ };
+
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE6) /* lcd_data14.uart5_ctsn */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* lcd_data15.uart5_rtsn */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4) /* lcd_data9.uart5_rxd */
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE4) /* lcd_data8.uart5_txd */
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+
+ /* Slave 2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_crs_dv */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rxer */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_txen */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii2_refclk */
+
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+ mmc0_pins_default: pinmux_mmc0_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_14 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_18 */
+ >;
+ };
+
+ mmc2_pins_default: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ /* eMMC */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad8.mmc2_dat4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad9.mmc2_dat5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad10.mmc2_dat6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad11.mmc2_dat7 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc2_clk */
+ >;
+ };
+
+ spi0_pins: pinmux_spi0 {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+
+};
+
+&uart0 {
+ /* Console */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
+
+&uart1 {
+ /* UART 1 setting */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&uart5 {
+ /* UART 2 setting */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@2d {
+ compatible = "ti,tps65910";
+ reg = <0x2d>;
+ };
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c16";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
+
+ rtc_wdt: rtc_wdt@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+ gpio_xten: gpio_xten@27 {
+ compatible = "nxp,pca9535";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x27>;
+ };
+};
+
+&usb0 {
+ dr_mode = "host";
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+
+#include "tps65910.dtsi"
+&tps {
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ regulators {
+ vrtc_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@1 {
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ regulator-always-on;
+ };
+
+ vdd3_reg: regulator@4 {
+ regulator-always-on;
+ };
+
+ vdig1_reg: regulator@5 {
+ regulator-always-on;
+ };
+
+ vdig2_reg: regulator@6 {
+ regulator-always-on;
+ };
+
+ vpll_reg: regulator@7 {
+ regulator-always-on;
+ };
+
+ vdac_reg: regulator@8 {
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc_reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+/* Power */
+&vbat {
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+};
+
+&mac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpsw_default>;
+ dual_emac = <1>;
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&davinci_mdio_default>;
+ status = "okay";
+
+ ethphy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ ethphy1: ethernet-phy@5 {
+ reg = <5>;
+ };
+};
+
+&cpsw_emac0 {
+ status = "okay";
+ phy-handle = <ðphy0>;
+ phy-mode = "rmii";
+ dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+ status = "okay";
+ phy-handle = <ðphy1>;
+ phy-mode = "rmii";
+ dual_emac_res_vlan = <2>;
+};
+
+&sham {
+ status = "okay";
+};
+
+&aes {
+ status = "okay";
+};
+
+&gpio0 {
+ ti,no-reset-on-init;
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+ pinctrl-0 = <&mmc0_pins_default>;
+ cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&mmc3 {
+ dmas = <&edma_xbar 12 0 1
+ &edma_xbar 13 0 2>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <8>;
+ pinctrl-0 = <&mmc2_pins_default>;
+ ti,non-removable;
+ status = "okay";
+};
+
+&buttons {
+ pinctrl-names = "default";
+ pinctrl-0 = <&push_button_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@0 {
+ label = "push_button";
+ linux,code = <0x100>;
+ gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+ };
+};
+
+/* SPI Busses */
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+
+ m25p80@0 {
+ compatible = "mx25l6405d";
+ spi-max-frequency = <40000000>;
+
+ reg = <0>;
+ spi-cpol;
+ spi-cpha;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* reg : The partition's offset and size within the mtd bank. */
+ partitions@0 {
+ label = "MLO";
+ reg = <0x0 0x80000>;
+ };
+
+ partitions@1 {
+ label = "U-Boot";
+ reg = <0x80000 0x100000>;
+ };
+
+ partitions@2 {
+ label = "U-Boot Env";
+ reg = <0x180000 0x20000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
index f03e72c..0c7949d 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
@@ -4,39 +4,19 @@
*
* Author: SZ Lin (林上智) <sz.lin@moxa.com>
*/
-
/dts-v1/;
-#include "am33xx.dtsi"
+#include "am335x-moxa-uc-8100-common.dtsi"
/ {
model = "Moxa UC-8100-ME-T";
compatible = "moxa,uc-8100-me-t", "ti,am33xx";
- cpus {
- cpu@0 {
- cpu0-supply = <&vdd1_reg>;
- };
- };
-
memory {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
- vbat: vbat-regulator {
- compatible = "regulator-fixed";
- };
-
- /* Power supply provides a fixed 3.3V @3A */
- vmmcsd_fixed: vmmcsd-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vmmcsd_fixed";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
-
leds {
compatible = "gpio-leds";
led1 {
@@ -88,237 +68,17 @@ led9 {
default-state = "off";
};
};
-
- buttons: push_button {
- compatible = "gpio-keys";
- };
-
-};
-
-&am33xx_pinmux {
- pinctrl-names = "default";
- pinctrl-0 = <&minipcie_pins>;
-
- minipcie_pins: pinmux_minipcie {
- pinctrl-single,pins = <
- AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2_24 */
- AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2_25 */
- AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2_22 Power off PIN*/
- >;
- };
-
- push_button_pins: pinmux_push_button {
- pinctrl-single,pins = <
- AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mcasp0_ahcklx.gpio3_21 */
- >;
- };
-
- i2c0_pins: pinmux_i2c0_pins {
- pinctrl-single,pins = <
- AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
- >;
- };
-
-
- i2c1_pins: pinmux_i2c1_pins {
- pinctrl-single,pins = <
- AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_ctsn.i2c1_sda */
- AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_rtsn.i2c1_scl */
- >;
- };
-
- uart0_pins: pinmux_uart0_pins {
- pinctrl-single,pins = <
- AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
- >;
- };
-
- uart1_pins: pinmux_uart1_pins {
- pinctrl-single,pins = <
- AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0)
- >;
- };
-
- uart2_pins: pinmux_uart2_pins {
- pinctrl-single,pins = <
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE6) /* lcd_data14.uart5_ctsn */
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* lcd_data15.uart5_rtsn */
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4) /* lcd_data9.uart5_rxd */
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE4) /* lcd_data8.uart5_txd */
- >;
- };
-
- cpsw_default: cpsw_default {
- pinctrl-single,pins = <
- /* Slave 1 */
- AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
- AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)
- AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
- AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
- AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
- AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)
- AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)
- AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
-
- /* Slave 2 */
- AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_crs_dv */
- AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rxer */
- AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_txen */
- AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td1 */
- AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td0 */
- AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd1 */
- AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd0 */
- AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii2_refclk */
-
- >;
- };
-
- davinci_mdio_default: davinci_mdio_default {
- pinctrl-single,pins = <
- /* MDIO */
- AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
- >;
- };
-
- mmc0_pins_default: pinmux_mmc0_pins {
- pinctrl-single,pins = <
- AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_14 */
- AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_18 */
- >;
- };
-
- mmc2_pins_default: pinmux_mmc2_pins {
- pinctrl-single,pins = <
- /* eMMC */
- AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */
- AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */
- AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */
- AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */
- AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad8.mmc2_dat4 */
- AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad9.mmc2_dat5 */
- AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad10.mmc2_dat6 */
- AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad11.mmc2_dat7 */
- AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
- AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc2_clk */
- >;
- };
-
- spi0_pins: pinmux_spi0 {
- pinctrl-single,pins = <
- AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
- >;
- };
-
-};
-
-&uart0 {
- /* Console */
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
-};
-
-&uart1 {
- /* UART 1 setting */
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
-};
-
-&uart5 {
- /* UART 2 setting */
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
-
- status = "okay";
- clock-frequency = <400000>;
-
tpm: tpm@20 {
compatible = "infineon,slb9645tt";
reg = <0x20>;
};
-
- tps: tps@2d {
- compatible = "ti,tps65910";
- reg = <0x2d>;
- };
-
- eeprom: eeprom@50 {
- compatible = "atmel,24c16";
- pagesize = <16>;
- reg = <0x50>;
- };
-
- rtc_wdt: rtc_wdt@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
- };
};
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
-
- status = "okay";
- clock-frequency = <400000>;
- gpio_xten: gpio_xten@27 {
- compatible = "nxp,pca9535";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x27>;
- };
-};
-
-&usb0 {
- dr_mode = "host";
-};
-
-&usb1 {
- dr_mode = "host";
-};
-
-#include "tps65910.dtsi"
-
&tps {
- vcc1-supply = <&vbat>;
- vcc2-supply = <&vbat>;
- vcc3-supply = <&vbat>;
- vcc4-supply = <&vbat>;
- vcc5-supply = <&vbat>;
- vcc6-supply = <&vbat>;
- vcc7-supply = <&vbat>;
- vccio-supply = <&vbat>;
-
regulators {
- vrtc_reg: regulator@0 {
- regulator-always-on;
- };
-
- vio_reg: regulator@1 {
- regulator-always-on;
- };
-
vdd1_reg: regulator@2 {
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
@@ -336,168 +96,6 @@ vdd2_reg: regulator@3 {
regulator-boot-on;
regulator-always-on;
};
-
- vdd3_reg: regulator@4 {
- regulator-always-on;
- };
-
- vdig1_reg: regulator@5 {
- regulator-always-on;
- };
-
- vdig2_reg: regulator@6 {
- regulator-always-on;
- };
-
- vpll_reg: regulator@7 {
- regulator-always-on;
- };
-
- vdac_reg: regulator@8 {
- regulator-always-on;
- };
-
- vaux1_reg: regulator@9 {
- regulator-always-on;
- };
-
- vaux2_reg: regulator@10 {
- regulator-always-on;
- };
-
- vaux33_reg: regulator@11 {
- regulator-always-on;
- };
-
- vmmc_reg: regulator@12 {
- compatible = "regulator-fixed";
- regulator-name = "vmmc_reg";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
};
};
-/* Power */
-&vbat {
- regulator-name = "vbat";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-};
-
-&mac {
- pinctrl-names = "default";
- pinctrl-0 = <&cpsw_default>;
- dual_emac = <1>;
- status = "okay";
-};
-
-&davinci_mdio {
- pinctrl-names = "default";
- pinctrl-0 = <&davinci_mdio_default>;
- status = "okay";
-
- ethphy0: ethernet-phy@4 {
- reg = <4>;
- };
-
- ethphy1: ethernet-phy@5 {
- reg = <5>;
- };
-};
-
-&cpsw_emac0 {
- status = "okay";
- phy-handle = <ðphy0>;
- phy-mode = "rmii";
- dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
- status = "okay";
- phy-handle = <ðphy1>;
- phy-mode = "rmii";
- dual_emac_res_vlan = <2>;
-};
-
-&sham {
- status = "okay";
-};
-
-&aes {
- status = "okay";
-};
-
-&gpio0 {
- ti,no-reset-on-init;
-};
-
-&mmc1 {
- pinctrl-names = "default";
- vmmc-supply = <&vmmcsd_fixed>;
- bus-width = <4>;
- pinctrl-0 = <&mmc0_pins_default>;
- cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
- wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&mmc3 {
- dmas = <&edma_xbar 12 0 1
- &edma_xbar 13 0 2>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- vmmc-supply = <&vmmcsd_fixed>;
- bus-width = <8>;
- pinctrl-0 = <&mmc2_pins_default>;
- non-removable;
- status = "okay";
-};
-
-&buttons {
- pinctrl-names = "default";
- pinctrl-0 = <&push_button_pins>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- button@0 {
- label = "push_button";
- linux,code = <0x100>;
- gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
- };
-};
-
-/* SPI Busses */
-&spi0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins>;
-
- m25p80@0 {
- compatible = "mx25l6405d";
- spi-max-frequency = <40000000>;
-
- reg = <0>;
- spi-cpol;
- spi-cpha;
- #address-cells = <1>;
- #size-cells = <1>;
-
- /* reg : The partition's offset and size within the mtd bank. */
- partitions@0 {
- label = "MLO";
- reg = <0x0 0x80000>;
- };
-
- partitions@1 {
- label = "U-Boot";
- reg = <0x80000 0x100000>;
- };
-
- partitions@2 {
- label = "U-Boot Env";
- reg = <0x180000 0x20000>;
- };
- };
-};
diff --git a/arch/arm/boot/dts/am335x-sbc-t335.dts b/arch/arm/boot/dts/am335x-sbc-t335.dts
index a3f6bc4..81e4453 100644
--- a/arch/arm/boot/dts/am335x-sbc-t335.dts
+++ b/arch/arm/boot/dts/am335x-sbc-t335.dts
@@ -155,13 +155,13 @@ gpio_ext: pca9555@26 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x26>;
- dvi_ena {
+ dvi-ena-hog {
gpio-hog;
gpios = <13 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "dvi-enable";
};
- lcd_ena {
+ lcd-ena-hog {
gpio-hog;
gpios = <11 GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index b88d0caa..ea20e4b 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -425,7 +425,6 @@ target-module@39000 { /* 0x44e39000, ap 33 02.0 */
target-module@3e000 { /* 0x44e3e000, ap 35 60.0 */
compatible = "ti,sysc-omap4-simple", "ti,sysc";
- ti,hwmods = "rtc";
reg = <0x3e074 0x4>,
<0x3e078 0x4>;
reg-names = "rev", "sysc";
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 5cb4cc3..4c22980 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -172,7 +172,7 @@ mpu {
* for the moment, just use a fake OCP bus entry to represent
* the whole bus hierarchy.
*/
- ocp {
+ ocp: ocp {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -578,6 +578,7 @@ target-module@56000000 {
<SYSC_IDLE_SMART>;
clocks = <&gfx_l3_clkctrl AM3_GFX_L3_GFX_CLKCTRL 0>;
clock-names = "fck";
+ power-domains = <&prm_gfx>;
resets = <&prm_gfx 0>;
reset-names = "rstctrl";
#address-cells = <1>;
@@ -617,6 +618,7 @@ prm_device: prm@f00 {
prm_gfx: prm@1100 {
compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
reg = <0x1100 0x100>;
+ #power-domain-cells = <0>;
#reset-cells = <1>;
};
};
diff --git a/arch/arm/boot/dts/am3517-evm-ui.dtsi b/arch/arm/boot/dts/am3517-evm-ui.dtsi
index 250c40d..7d8f32b 100644
--- a/arch/arm/boot/dts/am3517-evm-ui.dtsi
+++ b/arch/arm/boot/dts/am3517-evm-ui.dtsi
@@ -183,14 +183,14 @@ tvp5146@5c {
};
&mcbsp1 {
- status = "ok";
+ status = "okay";
#sound-dai-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&mcbsp1_pins>;
};
&mcbsp2 {
- status = "ok";
+ status = "okay";
#sound-dai-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index 04f20e7..0d2fac9 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -176,7 +176,7 @@ &davinci_mdio {
};
&dss {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_dpi_pins>;
diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts
index 1bb5701..9423e9f 100644
--- a/arch/arm/boot/dts/am3874-iceboard.dts
+++ b/arch/arm/boot/dts/am3874-iceboard.dts
@@ -195,7 +195,7 @@ u41: pca9575@20 {
"FMCA_PG_C2M", "FMCA_PRSNT_M2C_L", "FMCA_CLK_DIR", "SFP_LOS",
"FMCB_EN_12V0", "FMCB_EN_3V3", "FMCB_EN_VADJ", "FMCB_PG_M2C",
"FMCB_PG_C2M", "FMCB_PRSNT_M2C_L", "FMCB_CLK_DIR", "SFP_ModPrsL";
- reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
};
u42: pca9575@21 {
@@ -208,7 +208,7 @@ u42: pca9575@21 {
"QSFPA_LPMode", "QSFPB_ModPrsL", "QSFPB_IntL", "QSFPB_ResetL",
"SFP_TxFault", "SFP_TxDisable", "SFP_RS0", "SFP_RS1",
"QSFPB_ModSelL", "QSFPB_LPMode", "SEL_SFP", "ARM_MR";
- reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
};
u48: pca9575@22 {
@@ -227,7 +227,7 @@ u48: pca9575@22 {
"GP_SW5", "GP_SW6", "GP_SW7", "GP_SW8",
"GP_LED8", "GP_LED7", "GP_LED6", "GP_LED5",
"GP_LED4", "GP_LED3", "GP_LED2", "GP_LED1";
- reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
};
u59: pca9575@23 {
@@ -240,7 +240,7 @@ u59: pca9575@23 {
"GTX1V8PowerFault", "PHYAPowerFault", "PHYBPowerFault", "ArmPowerFault",
"BP_SLOW_GPIO0", "BP_SLOW_GPIO1", "BP_SLOW_GPIO2", "BP_SLOW_GPIO3",
"BP_SLOW_GPIO4", "BP_SLOW_GPIO5", "__unused_u59_p16", "__unused_u59_p17";
- reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
};
tmp100@48 { compatible = "ti,tmp100"; reg = <0x48>; };
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 1431404..878406b 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -35,8 +35,8 @@ aliases {
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
- ethernet0 = &cpsw_emac0;
- ethernet1 = &cpsw_emac1;
+ ethernet0 = &cpsw_port1;
+ ethernet1 = &cpsw_port2;
spi0 = &qspi;
};
@@ -517,6 +517,7 @@ target-module@56000000 {
<SYSC_IDLE_SMART>;
clocks = <&gfx_l3_clkctrl AM4_GFX_L3_GFX_CLKCTRL 0>;
clock-names = "fck";
+ power-domains = <&prm_gfx>;
resets = <&prm_gfx 0>;
reset-names = "rstctrl";
#address-cells = <1>;
@@ -533,6 +534,7 @@ &prcm {
prm_gfx: prm@400 {
compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
reg = <0x400 0x100>;
+ #power-domain-cells = <0>;
#reset-cells = <1>;
};
diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts
index a6b4fca..a83f46e 100644
--- a/arch/arm/boot/dts/am437x-cm-t43.dts
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -325,17 +325,15 @@ partition@100000 {
};
};
-&mac {
+&mac_sw {
pinctrl-names = "default";
pinctrl-0 = <&cpsw_default>;
- dual_emac = <1>;
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
pinctrl-names = "default";
pinctrl-0 = <&davinci_mdio_default>;
- status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
@@ -346,16 +344,16 @@ ethphy1: ethernet-phy@1 {
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <ðphy0>;
phy-mode = "rgmii-txid";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <ðphy1>;
phy-mode = "rgmii-txid";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};
&dwc3_1 {
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index b28e5c8..6e4d05d 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -906,28 +906,31 @@ &usb2 {
status = "okay";
};
-&mac {
- slaves = <1>;
+&mac_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
- status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <ðphy0>;
phy-mode = "rgmii-rxid";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
};
&elm {
@@ -1024,7 +1027,7 @@ partition@9 {
};
&dss {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_pins>;
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 8b986c4..2dc5255 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -483,28 +483,31 @@ partition@6 {
};
};
-&mac {
- slaves = <1>;
+&mac_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
- status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <ðphy0>;
phy-mode = "rgmii-rxid";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
};
&rtc {
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index 3d393fe..c220dc3 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -409,9 +409,8 @@ target-module@39000 { /* 0x44e39000, ap 32 02.0 */
ranges = <0x0 0x39000 0x1000>;
};
- target-module@3e000 { /* 0x44e3e000, ap 34 60.0 */
+ rtc_target: target-module@3e000 { /* 0x44e3e000, ap 34 60.0 */
compatible = "ti,sysc-omap4-simple", "ti,sysc";
- ti,hwmods = "rtc";
reg = <0x3e074 0x4>,
<0x3e078 0x4>;
reg-names = "rev", "sysc";
@@ -521,54 +520,57 @@ target-module@100000 { /* 0x4a100000, ap 3 04.0 */
#size-cells = <1>;
ranges = <0x0 0x100000 0x8000>;
- mac: ethernet@0 {
- compatible = "ti,am4372-cpsw","ti,cpsw";
- reg = <0x0 0x800
- 0x1200 0x100>;
+ mac_sw: switch@0 {
+ compatible = "ti,am4372-cpsw","ti,cpsw-switch";
+ reg = <0x0 0x4000>;
+ ranges = <0 0 0x4000>;
+ clocks = <&cpsw_125mhz_gclk>, <&dpll_clksel_mac_clk>;
+ clock-names = "fck", "50mclk";
+ assigned-clocks = <&dpll_clksel_mac_clk>;
+ assigned-clock-rates = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ syscon = <&scm_conf>;
+ status = "disabled";
+
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>,
- <&dpll_clksel_mac_clk>;
- clock-names = "fck", "cpts", "50mclk";
- assigned-clocks = <&dpll_clksel_mac_clk>;
- assigned-clock-rates = <50000000>;
- status = "disabled";
- cpdma_channels = <8>;
- ale_entries = <1024>;
- bd_ram_size = <0x2000>;
- mac_control = <0x20>;
- slaves = <2>;
- active_slave = <0>;
- cpts_clock_mult = <0x80000000>;
- cpts_clock_shift = <29>;
- ranges = <0 0 0x8000>;
- syscon = <&scm_conf>;
+ interrupt-names = "rx_thresh", "rx", "tx", "misc";
- davinci_mdio: mdio@1000 {
- compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio";
- reg = <0x1000 0x100>;
- clocks = <&cpsw_125mhz_clkctrl AM4_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpsw_port1: port@1 {
+ reg = <1>;
+ label = "port1";
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1 0>;
+ };
+
+ cpsw_port2: port@2 {
+ reg = <2>;
+ label = "port2";
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 2 0>;
+ };
+ };
+
+ davinci_mdio_sw: mdio@1000 {
+ compatible = "ti,am4372-mdio", "ti,cpsw-mdio","ti,davinci_mdio";
+ clocks = <&cpsw_125mhz_gclk>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <0>;
bus_freq = <1000000>;
- status = "disabled";
+ reg = <0x1000 0x100>;
};
- cpsw_emac0: slave@200 {
- /* Filled in by U-Boot */
- mac-address = [ 00 00 00 00 00 00 ];
- phys = <&phy_gmii_sel 1 0>;
- };
-
- cpsw_emac1: slave@300 {
- /* Filled in by U-Boot */
- mac-address = [ 00 00 00 00 00 00 ];
- phys = <&phy_gmii_sel 2 0>;
+ cpts {
+ clocks = <&cpsw_cpts_rft_clk>;
+ clock-names = "cpts";
};
};
};
diff --git a/arch/arm/boot/dts/am437x-sbc-t43.dts b/arch/arm/boot/dts/am437x-sbc-t43.dts
index 94cf07e..8ea3780 100644
--- a/arch/arm/boot/dts/am437x-sbc-t43.dts
+++ b/arch/arm/boot/dts/am437x-sbc-t43.dts
@@ -136,7 +136,7 @@ &mmc1 {
};
&dss {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_pinctrl_default>;
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 5fffdce..496ed34 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -792,19 +792,17 @@ partition@6 {
};
};
-&mac {
+&mac_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
- dual_emac = <1>;
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
- status = "okay";
ethphy0: ethernet-phy@4 {
reg = <4>;
@@ -815,16 +813,16 @@ ethphy1: ethernet-phy@5 {
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <ðphy0>;
phy-mode = "rgmii-rxid";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <ðphy1>;
phy-mode = "rgmii-rxid";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};
&elm {
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index de4fc78..f517d1e 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -550,29 +550,32 @@ &mmc1 {
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
-&mac {
+&mac_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
- slaves = <1>;
};
-&davinci_mdio {
+&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
- status = "okay";
ethphy0: ethernet-phy@16 {
reg = <16>;
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <ðphy0>;
phy-mode = "rmii";
phys = <&phy_gmii_sel 1 1>;
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
};
&i2c0 {
@@ -833,6 +836,10 @@ &epwmss0 {
status = "okay";
};
+&rtc_target {
+ status = "disabled";
+};
+
&tscadc {
status = "okay";
@@ -948,7 +955,7 @@ &hdq {
};
&dss {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_pins>;
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 391a92e..e81078c 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -208,30 +208,3 @@ &mmc2 {
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
};
-
-&mac_sw {
- pinctrl-names = "default", "sleep";
- status = "okay";
-};
-
-&cpsw_port1 {
- phy-handle = <ðphy0_sw>;
- phy-mode = "rgmii-rxid";
- ti,dual-emac-pvid = <1>;
-};
-
-&cpsw_port2 {
- phy-handle = <ðphy1_sw>;
- phy-mode = "rgmii-rxid";
- ti,dual-emac-pvid = <2>;
-};
-
-&davinci_mdio_sw {
- ethphy0_sw: ethernet-phy@0 {
- reg = <0>;
- };
-
- ethphy1_sw: ethernet-phy@1 {
- reg = <1>;
- };
-};
diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts
index e9c7f44..149cfaf 100644
--- a/arch/arm/boot/dts/am5729-beagleboneai.dts
+++ b/arch/arm/boot/dts/am5729-beagleboneai.dts
@@ -488,25 +488,29 @@ &uart1 {
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
reset-delay-us = <2>;
- phy0: ethernet-phy@1 {
+ phy0: ethernet-phy@4 {
reg = <4>;
eee-broken-100tx;
eee-broken-1000t;
};
};
-&mac {
- slaves = <1>;
+&mac_sw {
status = "okay";
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <&phy0>;
phy-mode = "rgmii-rxid";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
};
&ocp {
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index 1a3af4b..6504265 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -27,8 +27,3 @@ &mmc2 {
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20>;
};
-
-&mac {
- status = "okay";
- dual_emac;
-};
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts
index c9275d0..3775876 100644
--- a/arch/arm/boot/dts/am574x-idk.dts
+++ b/arch/arm/boot/dts/am574x-idk.dts
@@ -36,11 +36,6 @@ &mmc2 {
pinctrl-2 = <&mmc2_pins_default>;
};
-&mac {
- status = "okay";
- dual_emac;
-};
-
&m_can0 {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index b3a0206..6b82ecf 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -451,7 +451,7 @@ &uart3 {
<&dra7_pmx_core 0x3f8>;
};
-&davinci_mdio {
+&davinci_mdio_sw {
phy0: ethernet-phy@1 {
reg = <1>;
};
@@ -461,21 +461,20 @@ phy1: ethernet-phy@2 {
};
};
-&mac {
+&mac_sw {
status = "okay";
- dual_emac;
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <&phy0>;
phy-mode = "rgmii-rxid";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <&phy1>;
phy-mode = "rgmii-rxid";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};
&mmc1 {
@@ -582,13 +581,13 @@ map0 {
};
&dss {
- status = "ok";
+ status = "okay";
vdda_video-supply = <&ldoln_reg>;
};
&hdmi {
- status = "ok";
+ status = "okay";
vdda-supply = <&ldo4_reg>;
port {
@@ -599,7 +598,7 @@ hdmi_out: endpoint {
};
&pcie1_rc {
- status = "ok";
+ status = "okay";
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 34ca761..0d5fe2b 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -546,27 +546,26 @@ touchscreen@1 {
};
};
-&mac {
+&mac_sw {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_pins_default>;
pinctrl-1 = <&cpsw_pins_sleep>;
- dual_emac;
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <ðphy0>;
phy-mode = "rgmii-txid";
- dual_emac_res_vlan = <0>;
+ ti,dual-emac-pvid = <1>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <ðphy1>;
phy-mode = "rgmii-txid";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <2>;
};
-&davinci_mdio {
+&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_pins_default>;
pinctrl-1 = <&davinci_mdio_pins_sleep>;
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 1c77006..9fcb894 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -448,19 +448,23 @@ &rtc {
ext-clk-src;
};
-&cpsw_emac0 {
+&mac_sw {
+ status = "okay";
+};
+
+&cpsw_port1 {
phy-handle = <ðphy0>;
phy-mode = "rgmii-rxid";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <ðphy1>;
phy-mode = "rgmii-rxid";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};
-&davinci_mdio {
+&davinci_mdio_sw {
ethphy0: ethernet-phy@0 {
reg = <0>;
};
diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
index ce5bf1d..beef63e 100644
--- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
@@ -120,7 +120,7 @@ pca9555: pca9555@20 {
};
&dss {
- status = "ok";
+ status = "okay";
vdda_video-supply = <&ldoln_reg>;
@@ -148,7 +148,7 @@ lcd_in: endpoint {
};
&hdmi {
- status = "ok";
+ status = "okay";
vdda-supply = <&ldo4_reg>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index c36d28c..7da718a 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -26,7 +26,7 @@ chosen {
stdout-path = &usart2;
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x4000000>;
};
@@ -81,6 +81,7 @@ mmc0: mmc@fffa8000 {
pinctrl-0 = <&pinctrl_mmc0_clk
&pinctrl_mmc0_slot1_cmd_dat0
&pinctrl_mmc0_slot1_dat1_3>;
+ pinctrl-names = "default";
status = "okay";
slot@1 {
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
index fe0207b..a534a8e 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -390,7 +390,7 @@ wdog: watchdog@10010000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x10010000 0x1000>;
clocks = <&wdogclk>, <&pclk>;
- clock-names = "wdogclk", "apb_pclk";
+ clock-names = "wdog_clk", "apb_pclk";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
index 9748e0f..0c7dabe 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -546,7 +546,7 @@ watchdog@1000f000 {
interrupt-parent = <&intc_pb11mp>;
interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&wdogclk>, <&pclk>;
- clock-names = "wdogclk", "apb_pclk";
+ clock-names = "wdog_clk", "apb_pclk";
status = "disabled";
};
@@ -556,7 +556,7 @@ watchdog@10010000 {
interrupt-parent = <&intc_pb11mp>;
interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&wdogclk>, <&pclk>;
- clock-names = "wdogclk", "apb_pclk";
+ clock-names = "wdog_clk", "apb_pclk";
};
timer01: timer@10011000 {
@@ -568,8 +568,8 @@ timer01: timer@10011000 {
clocks = <&sp810_syscon 0>,
<&sp810_syscon 1>,
<&pclk>;
- clock-names = "timerclk0",
- "timerclk1",
+ clock-names = "timer0clk",
+ "timer1clk",
"apb_pclk";
};
@@ -582,8 +582,8 @@ timer23: timer@10012000 {
clocks = <&sp810_syscon 2>,
<&sp810_syscon 3>,
<&pclk>;
- clock-names = "timerclk2",
- "timerclk3",
+ clock-names = "timer0clk",
+ "timer1clk",
"apb_pclk";
};
@@ -645,16 +645,16 @@ rtc: rtc@10017000 {
timer45: timer@10018000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x10018000 0x1000>;
- clocks = <&timclk>, <&pclk>;
- clock-names = "timer", "apb_pclk";
+ clocks = <&timclk>, <&timclk>, <&pclk>;
+ clock-names = "timer0clk", "timer1clk", "apb_pclk";
status = "disabled";
};
timer67: timer@10019000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x10019000 0x1000>;
- clocks = <&timclk>, <&pclk>;
- clock-names = "timer", "apb_pclk";
+ clocks = <&timclk>, <&timclk>, <&pclk>;
+ clock-names = "timer0clk", "timer1clk", "apb_pclk";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
index f61bd59..ac95667 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -381,7 +381,7 @@ wdog0: watchdog@1000f000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x1000f000 0x1000>;
clocks = <&wdogclk>, <&pclk>;
- clock-names = "wdogclk", "apb_pclk";
+ clock-names = "wdog_clk", "apb_pclk";
status = "disabled";
};
@@ -389,7 +389,7 @@ wdog1: watchdog@10010000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x10010000 0x1000>;
clocks = <&wdogclk>, <&pclk>;
- clock-names = "wdogclk", "apb_pclk";
+ clock-names = "wdog_clk", "apb_pclk";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
index 7bc7df7..2fb8b14 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
@@ -1571,3 +1571,20 @@ &sdhci0 {
&sdhci1 {
status = "disabled";
};
+
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout.dtsi"
+};
+
+&fmc_flash1 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ flash1@0 {
+ reg = <0x0 0x2000000>;
+ label = "flash1";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
index 88ce4ff9..c34741d 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
@@ -88,17 +88,60 @@ &wdt2 {
*/
&fmc_flash0 {
partitions {
- data0@1c00000 {
- reg = <0x1c00000 0x2400000>;
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /*
+ * u-boot partition: 384KB.
+ */
+ u-boot@0 {
+ reg = <0x0 0x60000>;
+ label = "u-boot";
};
+
+ /*
+ * u-boot environment variables: 128KB.
+ */
+ u-boot-env@60000 {
+ reg = <0x60000 0x20000>;
+ label = "env";
+ };
+
+ /*
+ * FIT image: 59.5 MB.
+ */
+ fit@80000 {
+ reg = <0x80000 0x3b80000>;
+ label = "fit";
+ };
+
+ /*
+ * "data0" partition (4MB) is reserved for persistent
+ * data store.
+ */
+ data0@3800000 {
+ reg = <0x3c00000 0x400000>;
+ label = "data0";
+ };
+
+ /*
+ * "flash0" partition (covering the entire flash) is
+ * explicitly created to avoid breaking legacy applications.
+ */
flash0@0 {
reg = <0x0 0x4000000>;
+ label = "flash0";
};
};
};
&fmc_flash1 {
partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
flash1@0 {
reg = <0x0 0x4000000>;
};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
index 8ac23ff..8c426ba 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
@@ -48,7 +48,7 @@ &fmc {
flash@0 {
status = "okay";
m25p,fast-read;
- label = "fmc0";
+ label = "spi0.0";
#include "facebook-bmc-flash-layout.dtsi"
};
};
@@ -71,7 +71,8 @@ &uart4 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd4_default
- &pinctrl_rxd4_default>;
+ &pinctrl_rxd4_default
+ &pinctrl_ndts4_default>;
};
&uart5 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
new file mode 100644
index 0000000..ad1fcad
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
@@ -0,0 +1,420 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+ model = "Facebook Wedge 400 BMC";
+ compatible = "facebook,wedge400-bmc", "aspeed,ast2500";
+
+ aliases {
+ /*
+ * PCA9548 (2-0070) provides 8 channels connecting to
+ * SCM (System Controller Module).
+ */
+ i2c16 = &imux16;
+ i2c17 = &imux17;
+ i2c18 = &imux18;
+ i2c19 = &imux19;
+ i2c20 = &imux20;
+ i2c21 = &imux21;
+ i2c22 = &imux22;
+ i2c23 = &imux23;
+
+ /*
+ * PCA9548 (8-0070) provides 8 channels connecting to
+ * SMB (Switch Main Board).
+ */
+ i2c24 = &imux24;
+ i2c25 = &imux25;
+ i2c26 = &imux26;
+ i2c27 = &imux27;
+ i2c28 = &imux28;
+ i2c29 = &imux29;
+ i2c30 = &imux30;
+ i2c31 = &imux31;
+
+ /*
+ * PCA9548 (11-0076) provides 8 channels connecting to
+ * FCM (Fan Controller Module).
+ */
+ i2c32 = &imux32;
+ i2c33 = &imux33;
+ i2c34 = &imux34;
+ i2c35 = &imux35;
+ i2c36 = &imux36;
+ i2c37 = &imux37;
+ i2c38 = &imux38;
+ i2c39 = &imux39;
+
+ spi2 = &spi_gpio;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
+ };
+
+ ast-adc-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
+ };
+
+ /*
+ * GPIO-based SPI Master is required to access SPI TPM, because
+ * full-duplex SPI transactions are not supported by ASPEED SPI
+ * Controllers.
+ */
+ spi_gpio: spi-gpio {
+ status = "okay";
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+ gpio-sck = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
+ gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+
+ tpmdev@0 {
+ compatible = "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
+};
+
+/*
+ * Both firmware flashes are 128MB on Wedge400 BMC.
+ */
+&fmc_flash0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /*
+ * u-boot partition: 384KB.
+ */
+ u-boot@0 {
+ reg = <0x0 0x60000>;
+ label = "u-boot";
+ };
+
+ /*
+ * u-boot environment variables: 128KB.
+ */
+ u-boot-env@60000 {
+ reg = <0x60000 0x20000>;
+ label = "env";
+ };
+
+ /*
+ * FIT image: 123.5 MB.
+ */
+ fit@80000 {
+ reg = <0x80000 0x7b80000>;
+ label = "fit";
+ };
+
+ /*
+ * "data0" partition (4MB) is reserved for persistent
+ * data store.
+ */
+ data0@3800000 {
+ reg = <0x7c00000 0x800000>;
+ label = "data0";
+ };
+
+ /*
+ * "flash0" partition (covering the entire flash) is
+ * explicitly created to avoid breaking legacy applications.
+ */
+ flash0@0 {
+ reg = <0x0 0x8000000>;
+ label = "flash0";
+ };
+ };
+};
+
+&fmc_flash1 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ flash1@0 {
+ reg = <0x0 0x8000000>;
+ label = "flash1";
+ };
+ };
+};
+
+&uart2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default
+ &pinctrl_rxd2_default>;
+};
+
+&uart4 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd4_default
+ &pinctrl_rxd4_default>;
+};
+
+/*
+ * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
+ * communication.
+ */
+&i2c0 {
+ status = "okay";
+ multi-master;
+ bus-frequency = <1000000>;
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux16: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux17: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux18: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux19: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux20: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux21: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux22: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux23: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux24: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux25: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux26: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux27: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux28: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux29: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux30: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux31: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+
+ };
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux32: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux33: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux34: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux35: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux36: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux37: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux38: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux39: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+
+ };
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&adc {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&sdhci1 {
+ /*
+ * DMA mode needs to be disabled to avoid conflicts with UHCI
+ * Controller in AST2500 SoC.
+ */
+ sdhci-caps-mask = <0x0 0x580000>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
index fe2e11c..5e61058 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
@@ -108,3 +108,20 @@ &i2c12 {
&i2c13 {
status = "okay";
};
+
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout.dtsi"
+};
+
+&fmc_flash1 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ flash1@0 {
+ reg = <0x0 0x2000000>;
+ label = "flash1";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index b94421f..21ae880 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -4,6 +4,7 @@
#include "aspeed-g6.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
#include <dt-bindings/leds/leds-pca955x.h>
/ {
@@ -52,9 +53,10 @@ flash_memory: region@B8000000 {
};
vga_memory: region@bf000000 {
- no-map;
- reg = <0xbf000000 0x01000000>; /* 16M */
- };
+ no-map;
+ compatible = "shared-dma-pool";
+ reg = <0xbf000000 0x01000000>; /* 16M */
+ };
};
gpio-keys {
@@ -178,6 +180,10 @@ &emmc_controller {
status = "okay";
};
+&pinctrl_emmc_default {
+ bias-disable;
+};
+
&emmc {
status = "okay";
};
@@ -698,6 +704,7 @@ eeprom@53 {
};
&i2c7 {
+ multi-master;
status = "okay";
si7021-a20@20 {
@@ -831,6 +838,11 @@ gpio@15 {
};
};
+ ibm-panel@62 {
+ compatible = "ibm,op-panel";
+ reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
+
dps: dps310@76 {
compatible = "infineon,dps310";
reg = <0x76>;
@@ -1121,3 +1133,8 @@ flash@0 {
spi-max-frequency = <100000000>;
};
};
+
+&xdma {
+ status = "okay";
+ memory-region = <&vga_memory>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
new file mode 100644
index 0000000..b648e46
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
@@ -0,0 +1,662 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+ model = "Mowgli BMC";
+ compatible = "ibm,mowgli-bmc", "aspeed,ast2500";
+
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flash_memory: region@98000000 {
+ no-map;
+ reg = <0x98000000 0x04000000>; /* 64M */
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ air-water {
+ label = "air-water";
+ gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 6)>;
+ };
+
+ checkstop {
+ label = "checkstop";
+ gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(J, 2)>;
+ };
+
+ ps0-presence {
+ label = "ps0-presence";
+ gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(Z, 2)>;
+ };
+
+ ps1-presence {
+ label = "ps1-presence";
+ gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(Z, 0)>;
+ };
+
+ id-button {
+ label = "id-button";
+ gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 1)>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <1000>;
+
+ fan0-presence {
+ label = "fan0-presence";
+ gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
+ linux,code = <9>;
+ };
+
+ fan1-presence {
+ label = "fan1-presence";
+ gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
+ linux,code = <10>;
+ };
+
+ fan2-presence {
+ label = "fan2-presence";
+ gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
+ linux,code = <11>;
+ };
+
+ fan3-presence {
+ label = "fan3-presence";
+ gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
+ linux,code = <12>;
+ };
+
+ fan4-presence {
+ label = "fan4-presence";
+ gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
+ linux,code = <13>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ front-fault {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ power-button {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
+ };
+
+ front-id {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ fan0 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
+ };
+
+ fan1 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
+ };
+
+ fan2 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
+ };
+
+ fan3 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
+ };
+
+ fan4 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ fsi: gpio-fsi {
+ compatible = "fsi-master-gpio", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-gpio-delays;
+
+ clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ trans-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
+ };
+
+ iio-hwmon-12v {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>;
+ };
+
+ iio-hwmon-5v {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 1>;
+ };
+
+ iio-hwmon-3v {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 2>;
+ };
+
+ iio-hwmon-vdd {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 3>;
+ };
+
+ iio-hwmon-vcs {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 5>;
+ };
+
+ iio-hwmon-vdn {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 7>;
+ };
+
+ iio-hwmon-vio {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 9>;
+ };
+
+ iio-hwmon-vddra {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 11>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 12>;
+ };
+
+ iio-hwmon-vddrb {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 13>;
+ };
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+ &pinctrl_pwm2_default &pinctrl_pwm3_default
+ &pinctrl_pwm4_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+
+ fan@5 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+ };
+
+ fan@6 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+ };
+
+ fan@7 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+ };
+
+ fan@8 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+ };
+
+ fan@9 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ partitions {
+ #address-cells = < 1 >;
+ #size-cells = < 1 >;
+ compatible = "fixed-partitions";
+ u-boot@0 {
+ reg = < 0 0x60000 >;
+ label = "u-boot";
+ };
+ u-boot-env@60000 {
+ reg = < 0x60000 0x20000 >;
+ label = "u-boot-env";
+ };
+ obmc-ubi@80000 {
+ reg = < 0x80000 0x1F80000 >;
+ label = "obmc-ubi";
+ };
+ };
+ };
+ flash@1 {
+ status = "okay";
+ label = "alt-bmc";
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ partitions {
+ #address-cells = < 1 >;
+ #size-cells = < 1 >;
+ compatible = "fixed-partitions";
+ u-boot@0 {
+ reg = < 0 0x60000 >;
+ label = "alt-u-boot";
+ };
+ u-boot-env@60000 {
+ reg = < 0x60000 0x20000 >;
+ label = "alt-u-boot-env";
+ };
+ obmc-ubi@80000 {
+ reg = < 0x80000 0x1F80000 >;
+ label = "alt-obmc-ubi";
+ };
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
+ spi-max-frequency = <100000000>;
+ };
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
+&uart1 {
+ /* Rear RS-232 connector */
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_nrts1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_nri1_default>;
+};
+
+&uart2 {
+ /* APSS */
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+ <&syscon ASPEED_CLK_MAC1RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ tmp275@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+};
+
+&i2c1 {
+ status = "disabled";
+};
+
+&i2c2 {
+ status = "okay";
+
+ /* CPU MFG CONN */
+
+};
+
+&i2c3 {
+ status = "okay";
+
+ /* APSS */
+ /* CPLD */
+
+ /* PCA9516 (repeater) ->
+ * CLK Buffer 9FGS9092
+ * Power Supply 0
+ * Power Supply 1
+ * PCA 9552 LED
+ */
+
+ pca9552: pca9552@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ power-supply@68 {
+ compatible = "ibm,cffps1";
+ reg = <0x68>;
+ };
+
+ power-supply@69 {
+ compatible = "ibm,cffps1";
+ reg = <0x69>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ /* CP0 VDD & VCS : IR35221 */
+ /* CP0 VDN & VIO : IR35221 */
+ /* CP0 VDDR : IR35221 */
+
+ ir35221@28 {
+ compatible = "infineon,ir35221";
+ reg = <0x28>;
+ };
+
+ ir35221@29 {
+ compatible = "infineon,ir35221";
+ reg = <0x29>;
+ };
+
+ ir35221@2d {
+ compatible = "infineon,ir35221";
+ reg = <0x2d>;
+ };
+
+};
+
+&i2c5 {
+ status = "disabled";
+};
+
+&i2c6 {
+ status = "disabled";
+};
+
+&i2c7 {
+ status = "disabled";
+};
+
+&i2c8 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ /* PCIe G3 x16 slot */
+};
+
+&i2c10 {
+ status = "disabled";
+};
+
+&i2c11 {
+ status = "okay";
+
+ /* CPLD */
+ /* TPM */
+ /* RTC RX8900CE */
+ /* TMP275A */
+ /* TMP275A */
+
+ tmp275@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ tmp275@49 {
+ compatible = "ti,tmp275";
+ reg = <0x49>;
+ };
+
+};
+
+&i2c12 {
+ status = "disabled";
+};
+
+&i2c13 {
+ status = "disabled";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default
+ &pinctrl_adc8_default
+ &pinctrl_adc9_default
+ &pinctrl_adc10_default
+ &pinctrl_adc11_default
+ &pinctrl_adc12_default
+ &pinctrl_adc13_default
+ &pinctrl_adc14_default
+ &pinctrl_adc15_default>;
+};
+
+&wdt1 {
+ aspeed,reset-type = "none";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+ aspeed,alt-boot;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&vhub {
+ status = "okay";
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index 5f4ee67..4d070d6 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -4,6 +4,7 @@
#include "aspeed-g6.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
#include <dt-bindings/leds/leds-pca955x.h>
/ {
@@ -438,7 +439,13 @@ aliases {
};
&i2c0 {
+ multi-master;
status = "okay";
+
+ ibm-panel@62 {
+ compatible = "ibm,op-panel";
+ reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
};
&i2c1 {
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 9c91afb..a93009a 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -425,7 +425,6 @@ vuart: serial@1e787000 {
interrupts = <8>;
clocks = <&syscon ASPEED_CLK_APB>;
no-loopback-test;
- aspeed,sirq-polarity-sense = <&syscon 0x70 25>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi
index 7468f10..c0c43b8 100644
--- a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi
@@ -47,25 +47,12 @@ fmc_flash0: flash@0 {
status = "okay";
m25p,fast-read;
label = "spi0.0";
-
-#include "facebook-bmc-flash-layout.dtsi"
};
fmc_flash1: flash@1 {
status = "okay";
m25p,fast-read;
label = "spi0.1";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- flash1@0 {
- reg = <0x0 0x2000000>;
- label = "flash1";
- };
- };
};
};
diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts
index dbfefef..713d18f 100644
--- a/arch/arm/boot/dts/at91-ariag25.dts
+++ b/arch/arm/boot/dts/at91-ariag25.dts
@@ -22,7 +22,7 @@ chosen {
bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
};
- memory {
+ memory@20000000 {
/* 128 MB, change this for 256 MB revision */
reg = <0x20000000 0x8000000>;
};
@@ -93,6 +93,7 @@ &mmc0 {
pinctrl-0 = <
&pinctrl_mmc0_slot0_clk_cmd_dat0
&pinctrl_mmc0_slot0_dat1_3>;
+ pinctrl-names = "default";
status = "okay";
slot@0 {
diff --git a/arch/arm/boot/dts/at91-ariettag25.dts b/arch/arm/boot/dts/at91-ariettag25.dts
index 0267e72..2c52a71 100644
--- a/arch/arm/boot/dts/at91-ariettag25.dts
+++ b/arch/arm/boot/dts/at91-ariettag25.dts
@@ -15,7 +15,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x8000000>;
};
@@ -48,6 +48,7 @@ &mmc0 {
pinctrl-0 = <
&pinctrl_mmc0_slot0_clk_cmd_dat0
&pinctrl_mmc0_slot0_dat1_3>;
+ pinctrl-names = "default";
status = "okay";
slot@0 {
diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi
index feebd54..ee0f5da 100644
--- a/arch/arm/boot/dts/at91-cosino.dtsi
+++ b/arch/arm/boot/dts/at91-cosino.dtsi
@@ -20,7 +20,7 @@ chosen {
bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x8000000>;
};
@@ -112,6 +112,7 @@ &mmc0 {
&pinctrl_board_mmc0
&pinctrl_mmc0_slot0_clk_cmd_dat0
&pinctrl_mmc0_slot0_dat1_3>;
+ pinctrl-names = "default";
status = "okay";
slot@0 {
diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts
index 73e88d1..04cb7be 100644
--- a/arch/arm/boot/dts/at91-cosino_mega2560.dts
+++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts
@@ -34,6 +34,7 @@ &mmc1 {
pinctrl-0 = <
&pinctrl_mmc1_slot0_clk_cmd_dat0
&pinctrl_mmc1_slot0_dat1_3>;
+ pinctrl-names = "default";
status = "okay";
slot@0 {
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
index 683b9e3..7edf057 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/at91-foxg20.dts
@@ -17,7 +17,7 @@ chosen {
bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x4000000>;
};
@@ -55,6 +55,7 @@ mmc0: mmc@fffa8000 {
&pinctrl_mmc0_clk
&pinctrl_mmc0_slot1_cmd_dat0
&pinctrl_mmc0_slot1_dat1_3>;
+ pinctrl-names = "default";
status = "okay";
slot@1 {
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index 7d938cc..7add151 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -18,7 +18,7 @@ chosen {
stdout-path = &dbgu;
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x2000000>;
};
diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
index af38253..25f7610 100644
--- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
@@ -17,7 +17,7 @@ chosen {
stdout-path = &dbgu;
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x10000000>;
};
diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
index fddf267..d37724c 100644
--- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
@@ -16,7 +16,7 @@ chosen {
stdout-path = &dbgu;
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x8000000>;
};
diff --git a/arch/arm/boot/dts/at91-linea.dtsi b/arch/arm/boot/dts/at91-linea.dtsi
index 41f1639..533a440 100644
--- a/arch/arm/boot/dts/at91-linea.dtsi
+++ b/arch/arm/boot/dts/at91-linea.dtsi
@@ -13,7 +13,7 @@ / {
compatible = "axentia,linea",
"atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
- memory {
+ memory@20000000 {
reg = <0x20000000 0x4000000>;
};
};
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index a50b7fd..969d990 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -14,7 +14,7 @@ chosen {
bootargs = "console=ttyS0,115200";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x4000000>;
};
@@ -52,6 +52,7 @@ mmc0: mmc@fffa8000 {
&pinctrl_mmc0_clk
&pinctrl_mmc0_slot0_cmd_dat0
&pinctrl_mmc0_slot0_dat1_3>;
+ pinctrl-names = "default";
status = "okay";
slot@0 {
reg = <0>;
diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts
index 954404e..1e2a28c 100644
--- a/arch/arm/boot/dts/at91-sam9_l9260.dts
+++ b/arch/arm/boot/dts/at91-sam9_l9260.dts
@@ -15,7 +15,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x4000000>;
};
@@ -49,6 +49,7 @@ &pinctrl_board_mmc0
&pinctrl_mmc0_clk
&pinctrl_mmc0_slot1_cmd_dat0
&pinctrl_mmc0_slot1_dat1_3>;
+ pinctrl-names = "default";
status = "okay";
slot@1 {
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 7abf555..cf13632 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -16,7 +16,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x10000000>;
};
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
index 0be184a..710cb72 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
@@ -9,7 +9,7 @@ / {
model = "Aries/DENX MA5D4";
compatible = "aries,ma5d4", "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
- memory {
+ memory@20000000 {
reg = <0x20000000 0x10000000>;
};
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index 924d949..e5974a1 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -16,7 +16,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index 0cc1cff..fe432b6 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -16,7 +16,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/at91-som60.dtsi b/arch/arm/boot/dts/at91-som60.dtsi
index 241682a..39474a1 100644
--- a/arch/arm/boot/dts/at91-som60.dtsi
+++ b/arch/arm/boot/dts/at91-som60.dtsi
@@ -16,7 +16,7 @@ chosen {
stdout-path = &dbgu;
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x8000000>;
};
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
index 15050fd..a51a337 100644
--- a/arch/arm/boot/dts/at91-vinco.dts
+++ b/arch/arm/boot/dts/at91-vinco.dts
@@ -17,7 +17,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x4000000>;
};
diff --git a/arch/arm/boot/dts/at91-wb45n.dtsi b/arch/arm/boot/dts/at91-wb45n.dtsi
index ebe61a2..430c753 100644
--- a/arch/arm/boot/dts/at91-wb45n.dtsi
+++ b/arch/arm/boot/dts/at91-wb45n.dtsi
@@ -17,7 +17,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x4000000>;
};
@@ -145,6 +145,7 @@ &usb2 {
};
&mmc0 {
+ pinctrl-names = "default";
pinctrl-0 = <
&pinctrl_mmc0_slot0_clk_cmd_dat0
&pinctrl_mmc0_slot0_dat1_3>;
diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/at91-wb50n.dtsi
index 1487b89..74b249b 100644
--- a/arch/arm/boot/dts/at91-wb50n.dtsi
+++ b/arch/arm/boot/dts/at91-wb50n.dtsi
@@ -17,7 +17,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x4000000>;
};
};
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index a5040f5..d1181ea 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -39,16 +39,17 @@ aliases {
ssc2 = &ssc2;
};
cpus {
- #address-cells = <0>;
+ #address-cells = <1>;
#size-cells = <0>;
- cpu {
+ cpu@0 {
compatible = "arm,arm920t";
device_type = "cpu";
+ reg = <0>;
};
};
- memory {
+ memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x04000000>;
};
@@ -70,6 +71,9 @@ main_xtal: main_xtal {
sram: sram@200000 {
compatible = "mmio-sram";
reg = <0x00200000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00200000 0x4000>;
};
ahb {
@@ -169,7 +173,6 @@ mmc0: mmc@fffb4000 {
clock-names = "mci_clk";
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index 1e0bf5af..e1ef4e4 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -15,7 +15,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x4000000>;
};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 6afbb48..82c5d7fd 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -36,16 +36,17 @@ aliases {
ssc0 = &ssc0;
};
cpus {
- #address-cells = <0>;
+ #address-cells = <1>;
#size-cells = <0>;
- cpu {
+ cpu@0 {
compatible = "arm,arm926ej-s";
device_type = "cpu";
+ reg = <0>;
};
};
- memory {
+ memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x04000000>;
};
@@ -73,6 +74,9 @@ adc_op_clk: adc_op_clk{
sram0: sram@2ff000 {
compatible = "mmio-sram";
reg = <0x002ff000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x002ff000 0x2000>;
};
ahb {
@@ -650,7 +654,6 @@ mmc0: mmc@fffa8000 {
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
clock-names = "mci_clk";
status = "disabled";
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
index 81f808a..d3446e4 100644
--- a/arch/arm/boot/dts/at91sam9260ek.dts
+++ b/arch/arm/boot/dts/at91sam9260ek.dts
@@ -16,7 +16,7 @@ chosen {
stdout-path = &dbgu;
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x4000000>;
};
@@ -55,6 +55,7 @@ &pinctrl_board_mmc0_slot1
&pinctrl_mmc0_clk
&pinctrl_mmc0_slot1_cmd_dat0
&pinctrl_mmc0_slot1_dat1_3>;
+ pinctrl-names = "default";
status = "okay";
slot@1 {
reg = <1>;
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index 5ed3d74..7adc36c 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -33,16 +33,17 @@ aliases {
};
cpus {
- #address-cells = <0>;
+ #address-cells = <1>;
#size-cells = <0>;
- cpu {
+ cpu@0 {
compatible = "arm,arm926ej-s";
device_type = "cpu";
+ reg = <0>;
};
};
- memory {
+ memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x08000000>;
};
@@ -64,6 +65,9 @@ slow_xtal: slow_xtal {
sram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x28000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00300000 0x28000>;
};
ahb {
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index c4ef74f..beed819 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -16,7 +16,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x4000000>;
};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 5c990cf..fe45d96 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -35,16 +35,17 @@ aliases {
};
cpus {
- #address-cells = <0>;
+ #address-cells = <1>;
#size-cells = <0>;
- cpu {
+ cpu@0 {
compatible = "arm,arm926ej-s";
device_type = "cpu";
+ reg = <0>;
};
};
- memory {
+ memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x08000000>;
};
@@ -66,11 +67,17 @@ slow_xtal: slow_xtal {
sram0: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x14000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00300000 0x14000>;
};
sram1: sram@500000 {
compatible = "mmio-sram";
reg = <0x00500000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00500000 0x4000>;
};
ahb {
@@ -647,7 +654,6 @@ mmc0: mmc@fff80000 {
compatible = "atmel,hsmci";
reg = <0xfff80000 0x600>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
@@ -659,7 +665,6 @@ mmc1: mmc@fff84000 {
compatible = "atmel,hsmci";
reg = <0xfff84000 0x600>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 62d2185..71f6057 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -16,7 +16,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x4000000>;
};
@@ -72,6 +72,7 @@ &pinctrl_board_mmc0
&pinctrl_mmc0_clk
&pinctrl_mmc0_slot0_cmd_dat0
&pinctrl_mmc0_slot0_dat1_3>;
+ pinctrl-names = "default";
status = "okay";
slot@0 {
reg = <0>;
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index 4117cf8..708e164 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -11,7 +11,7 @@ / {
model = "Atmel AT91SAM9G20 family SoC";
compatible = "atmel,at91sam9g20";
- memory {
+ memory@20000000 {
reg = <0x20000000 0x08000000>;
};
@@ -22,6 +22,9 @@ sram0: sram@2ff000 {
sram1: sram@2fc000 {
compatible = "mmio-sram";
reg = <0x002fc000 0x8000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x002fc000 0x8000>;
};
ahb {
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index bda2270..6e6e672 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -13,7 +13,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x4000000>;
};
@@ -93,6 +93,7 @@ &pinctrl_board_mmc0_slot1
&pinctrl_mmc0_clk
&pinctrl_mmc0_slot1_cmd_dat0
&pinctrl_mmc0_slot1_dat1_3>;
+ pinctrl-names = "default";
status = "okay";
slot@1 {
reg = <1>;
diff --git a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
new file mode 100644
index 0000000..7da70ae
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the GARDENA smart Gateway (Article No. 19000)
+ *
+ * Copyright (C) 2020 GARDENA GmbH
+ */
+
+/dts-v1/;
+
+#include "at91sam9g25.dtsi"
+#include "at91sam9x5ek.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "GARDENA smart Gateway (Article No. 19000)";
+ compatible = "gardena,smart-gateway-at91sam", "atmel,at91sam9g25", "atmel,at91sam9x5",
+ "atmel,at91sam9";
+
+ aliases {
+ serial1 = &usart3;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ user_btn1 {
+ label = "USER_BTN1";
+ gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_PROG1>;
+ };
+ };
+
+ 1wire_cm {
+ status = "disabled";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_blue {
+ label = "smartgw:power:blue";
+ gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ power_green {
+ label = "smartgw:power:green";
+ gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ power_red {
+ label = "smartgw:power:red";
+ gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ radio_blue {
+ label = "smartgw:radio:blue";
+ gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ radio_green {
+ label = "smartgw:radio:green";
+ gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ radio_red {
+ label = "smartgw:radio:red";
+ gpios = <&pioC 16 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ internet_blue {
+ label = "smartgw:internet:blue";
+ gpios = <&pioC 15 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ internet_green {
+ label = "smartgw:internet:green";
+ gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ internet_red {
+ label = "smartgw:internet:red";
+ gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ heartbeat {
+ label = "smartgw:heartbeat";
+ gpios = <&pioB 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ pb18 {
+ status = "disabled";
+ };
+
+ pd21 {
+ status = "disabled";
+ };
+ };
+};
+
+&macb0 {
+ phy-mode = "rmii";
+ status = "okay";
+};
+
+&usart0 {
+ status = "disabled";
+};
+
+&usart2 {
+ status = "disabled";
+};
+
+&usart3 {
+ status = "okay";
+
+ pinctrl-0 = <&pinctrl_usart3
+ &pinctrl_usart3_rts
+ &pinctrl_usart3_cts
+ >;
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&mmc0 {
+ status = "disabled";
+};
+
+&mmc1 {
+ status = "disabled";
+};
+
+&spi0 {
+ status = "disabled";
+};
+
+&i2c0 {
+ status = "disabled";
+};
+
+&adc0 {
+ status = "disabled";
+};
+
+&ssc0 {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 1fbee2a7..19fc748 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -41,16 +41,17 @@ aliases {
pwm0 = &pwm0;
};
cpus {
- #address-cells = <0>;
+ #address-cells = <1>;
#size-cells = <0>;
- cpu {
+ cpu@0 {
compatible = "arm,arm926ej-s";
device_type = "cpu";
+ reg = <0>;
};
};
- memory {
+ memory@70000000 {
device_type = "memory";
reg = <0x70000000 0x10000000>;
};
@@ -78,6 +79,9 @@ adc_op_clk: adc_op_clk{
sram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00300000 0x10000>;
};
ahb {
@@ -871,7 +875,6 @@ mmc0: mmc@fff80000 {
compatible = "atmel,hsmci";
reg = <0xfff80000 0x600>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
#address-cells = <1>;
@@ -885,7 +888,6 @@ mmc1: mmc@fffd0000 {
compatible = "atmel,hsmci";
reg = <0xfffd0000 0x600>;
interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>;
dma-names = "rxtx";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index a3a5c82..9734667 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -18,7 +18,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@70000000 {
reg = <0x70000000 0x4000000>;
};
@@ -99,6 +99,7 @@ mmc0: mmc@fff80000 {
&pinctrl_board_mmc0
&pinctrl_mmc0_slot0_clk_cmd_dat0
&pinctrl_mmc0_slot0_dat1_3>;
+ pinctrl-names = "default";
status = "okay";
slot@0 {
reg = <0>;
@@ -112,6 +113,7 @@ mmc1: mmc@fffd0000 {
&pinctrl_board_mmc1
&pinctrl_mmc1_slot0_clk_cmd_dat0
&pinctrl_mmc1_slot0_dat1_3>;
+ pinctrl-names = "default";
status = "okay";
slot@0 {
reg = <0>;
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index a994d07..0785389 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -37,16 +37,17 @@ aliases {
pwm0 = &pwm0;
};
cpus {
- #address-cells = <0>;
+ #address-cells = <1>;
#size-cells = <0>;
- cpu {
+ cpu@0 {
compatible = "arm,arm926ej-s";
device_type = "cpu";
+ reg = <0>;
};
};
- memory {
+ memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x10000000>;
};
@@ -68,6 +69,9 @@ main_xtal: main_xtal {
sram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x8000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00300000 0x8000>;
};
ahb {
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index 870b83f..2bc4e6e 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -17,7 +17,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x8000000>;
};
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 4d70194..5653e70c 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -38,16 +38,17 @@ aliases {
};
cpus {
- #address-cells = <0>;
+ #address-cells = <1>;
#size-cells = <0>;
- cpu {
+ cpu@0 {
compatible = "arm,arm926ej-s";
device_type = "cpu";
+ reg = <0>;
};
};
- memory {
+ memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x04000000>;
};
@@ -75,6 +76,9 @@ adc_op_clk: adc_op_clk{
sram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00300000 0x10000>;
};
ahb {
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
index 0de75d3..1590862 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -17,7 +17,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x4000000>;
};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 948fe99..4cdb050 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -39,16 +39,17 @@ aliases {
pwm0 = &pwm0;
};
cpus {
- #address-cells = <0>;
+ #address-cells = <1>;
#size-cells = <0>;
- cpu {
+ cpu@0 {
compatible = "arm,arm926ej-s";
device_type = "cpu";
+ reg = <0>;
};
};
- memory {
+ memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x10000000>;
};
@@ -76,6 +77,9 @@ adc_op_clk: adc_op_clk{
sram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x8000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00300000 0x8000>;
};
ahb {
@@ -647,7 +651,6 @@ mmc0: mmc@f0008000 {
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
- pinctrl-names = "default";
clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
clock-names = "mci_clk";
#address-cells = <1>;
@@ -661,7 +664,6 @@ mmc1: mmc@f000c000 {
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
- pinctrl-names = "default";
clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
clock-names = "mci_clk";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 75d2f7f..cdd37f6 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -7,7 +7,7 @@
*/
/ {
- memory {
+ memory@20000000 {
reg = <0x20000000 0x8000000>;
};
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index c934928..6d1264d 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -56,6 +56,7 @@ &mmc0 {
&pinctrl_board_mmc0
&pinctrl_mmc0_slot0_clk_cmd_dat0
&pinctrl_mmc0_slot0_dat1_3>;
+ pinctrl-names = "default";
status = "okay";
slot@0 {
@@ -70,6 +71,7 @@ &mmc1 {
&pinctrl_board_mmc1
&pinctrl_mmc1_slot0_clk_cmd_dat0
&pinctrl_mmc1_slot0_dat1_3>;
+ pinctrl-names = "default";
status = "okay";
slot@0 {
diff --git a/arch/arm/boot/dts/at91sam9xe.dtsi b/arch/arm/boot/dts/at91sam9xe.dtsi
index 3f9d8ca..f571f77 100644
--- a/arch/arm/boot/dts/at91sam9xe.dtsi
+++ b/arch/arm/boot/dts/at91sam9xe.dtsi
@@ -19,5 +19,8 @@ sram0: sram@2ff000 {
sram1: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00300000 0x4000>;
};
};
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 35bdd09..dacaef2 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -234,8 +234,8 @@ wdt0: wdt@18009000 {
compatible = "arm,sp805" , "arm,primecell";
reg = <0x18009000 0x1000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&axi81_clk>;
- clock-names = "apb_pclk";
+ clocks = <&axi81_clk>, <&axi81_clk>;
+ clock-names = "wdog_clk", "apb_pclk";
};
gpio_ccm: gpio@1800a000 {
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index c846fa3..e895f7c 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -368,7 +368,7 @@ rng: rng@33000 {
};
ccbtimer0: timer@34000 {
- compatible = "arm,sp804";
+ compatible = "arm,sp804", "arm,primecell";
reg = <0x34000 0x1000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
@@ -377,7 +377,7 @@ ccbtimer0: timer@34000 {
};
ccbtimer1: timer@35000 {
- compatible = "arm,sp804";
+ compatible = "arm,sp804", "arm,primecell";
reg = <0x35000 0x1000>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
@@ -438,7 +438,7 @@ watchdog@39000 {
reg = <0x39000 0x1000>;
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>, <&iprocslow>;
- clock-names = "wdogclk", "apb_pclk";
+ clock-names = "wdog_clk", "apb_pclk";
};
lcpll0: lcpll0@3f100 {
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index e94244a..09a1182 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -70,6 +70,14 @@ sd_vcc_reg: sd_vcc_reg {
};
};
+&ddc0 {
+ status = "okay";
+};
+
+&ddc1 {
+ status = "okay";
+};
+
&firmware {
firmware_clocks: clocks {
compatible = "raspberrypi,firmware-clocks";
@@ -170,6 +178,38 @@ &gpio {
"RGMII_TXD3";
};
+&hdmi0 {
+ clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
+ clock-names = "hdmi", "bvb", "audio", "cec";
+ status = "okay";
+};
+
+&hdmi1 {
+ clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+ clock-names = "hdmi", "bvb", "audio", "cec";
+ status = "okay";
+};
+
+&hvs {
+ clocks = <&firmware_clocks 4>;
+};
+
+&pixelvalve0 {
+ status = "okay";
+};
+
+&pixelvalve1 {
+ status = "okay";
+};
+
+&pixelvalve2 {
+ status = "okay";
+};
+
+&pixelvalve4 {
+ status = "okay";
+};
+
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
@@ -253,3 +293,11 @@ &uart1 {
&vchiq {
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
};
+
+&vc4 {
+ status = "okay";
+};
+
+&vec {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 00bcaed..4847dd3 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -12,6 +12,18 @@ / {
interrupt-parent = <&gicv2>;
+ vc4: gpu {
+ compatible = "brcm,bcm2711-vc5";
+ status = "disabled";
+ };
+
+ clk_27MHz: clk-27M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <27000000>;
+ clock-output-names = "27MHz-clock";
+ };
+
clk_108MHz: clk-108M {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -238,6 +250,27 @@ i2c6: i2c@7e205c00 {
status = "disabled";
};
+ pixelvalve0: pixelvalve@7e206000 {
+ compatible = "brcm,bcm2711-pixelvalve0";
+ reg = <0x7e206000 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ pixelvalve1: pixelvalve@7e207000 {
+ compatible = "brcm,bcm2711-pixelvalve1";
+ reg = <0x7e207000 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ pixelvalve2: pixelvalve@7e20a000 {
+ compatible = "brcm,bcm2711-pixelvalve2";
+ reg = <0x7e20a000 0x100>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
pwm1: pwm@7e20c800 {
compatible = "brcm,bcm2835-pwm";
reg = <0x7e20c800 0x28>;
@@ -248,10 +281,25 @@ pwm1: pwm@7e20c800 {
status = "disabled";
};
- hvs@7e400000 {
+ pixelvalve4: pixelvalve@7e216000 {
+ compatible = "brcm,bcm2711-pixelvalve4";
+ reg = <0x7e216000 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ hvs: hvs@7e400000 {
+ compatible = "brcm,bcm2711-hvs";
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
};
+ pixelvalve3: pixelvalve@7ec12000 {
+ compatible = "brcm,bcm2711-pixelvalve3";
+ reg = <0x7ec12000 0x100>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
dvp: clock@7ef00000 {
compatible = "brcm,brcm2711-dvp";
reg = <0x7ef00000 0x10>;
@@ -259,6 +307,78 @@ dvp: clock@7ef00000 {
#clock-cells = <1>;
#reset-cells = <1>;
};
+
+ hdmi0: hdmi@7ef00700 {
+ compatible = "brcm,bcm2711-hdmi0";
+ reg = <0x7ef00700 0x300>,
+ <0x7ef00300 0x200>,
+ <0x7ef00f00 0x80>,
+ <0x7ef00f80 0x80>,
+ <0x7ef01b00 0x200>,
+ <0x7ef01f00 0x400>,
+ <0x7ef00200 0x80>,
+ <0x7ef04300 0x100>,
+ <0x7ef20000 0x100>;
+ reg-names = "hdmi",
+ "dvp",
+ "phy",
+ "rm",
+ "packet",
+ "metadata",
+ "csc",
+ "cec",
+ "hd";
+ clock-names = "hdmi", "bvb", "audio", "cec";
+ resets = <&dvp 0>;
+ ddc = <&ddc0>;
+ dmas = <&dma 10>;
+ dma-names = "audio-rx";
+ status = "disabled";
+ };
+
+ ddc0: i2c@7ef04500 {
+ compatible = "brcm,bcm2711-hdmi-i2c";
+ reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
+ reg-names = "bsc", "auto-i2c";
+ clock-frequency = <97500>;
+ status = "disabled";
+ };
+
+ hdmi1: hdmi@7ef05700 {
+ compatible = "brcm,bcm2711-hdmi1";
+ reg = <0x7ef05700 0x300>,
+ <0x7ef05300 0x200>,
+ <0x7ef05f00 0x80>,
+ <0x7ef05f80 0x80>,
+ <0x7ef06b00 0x200>,
+ <0x7ef06f00 0x400>,
+ <0x7ef00280 0x80>,
+ <0x7ef09300 0x100>,
+ <0x7ef20000 0x100>;
+ reg-names = "hdmi",
+ "dvp",
+ "phy",
+ "rm",
+ "packet",
+ "metadata",
+ "csc",
+ "cec",
+ "hd";
+ ddc = <&ddc1>;
+ clock-names = "hdmi", "bvb", "audio", "cec";
+ resets = <&dvp 1>;
+ dmas = <&dma 17>;
+ dma-names = "audio-rx";
+ status = "disabled";
+ };
+
+ ddc1: i2c@7ef09500 {
+ compatible = "brcm,bcm2711-hdmi-i2c";
+ reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
+ reg-names = "bsc", "auto-i2c";
+ clock-frequency = <97500>;
+ status = "disabled";
+ };
};
/*
diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
new file mode 100644
index 0000000..3b978dc
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Meraki MR32 / Codename: Espresso
+ *
+ * Copyright (C) 2018-2020 Christian Lamparter <chunkeey@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "meraki,mr32", "brcm,brcm53016", "brcm,bcm4708";
+ model = "Meraki MR32";
+
+ chosen {
+ bootargs = " console=ttyS0,115200n8 earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ serial1 = &uart2;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ sysled3 {
+ function = LED_FUNCTION_FAULT;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+ panic-indicator;
+ };
+ sysled2 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ pwm-leds {
+ compatible = "pwm-leds";
+
+ red {
+ /* SYS-LED 1 - Tricolor */
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RED>;
+ pwms = <&pwm 0 50000 0>;
+ max-brightness = <255>;
+ };
+
+ green {
+ /* SYS-LED 1 - Tricolor */
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
+ pwms = <&pwm 1 50000 0>;
+ max-brightness = <255>;
+ };
+
+ blue {
+ /* SYS-LED 1 - Tricolor */
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_BLUE>;
+ pwms = <&pwm 2 50000 0>;
+ max-brightness = <255>;
+ };
+ };
+
+ i2c {
+ /*
+ * The platform provided I2C does not budge.
+ * This is a replacement until I can figure
+ * out what are the missing bits...
+ */
+
+ compatible = "i2c-gpio";
+ sda-gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <10>; /* close to 100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ current_sense: ina219@45 {
+ compatible = "ti,ina219";
+ reg = <0x45>;
+ shunt-resistor = <60000>; /* = 60 mOhms */
+ };
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ read-only;
+ };
+ };
+};
+
+&uart0 {
+ clock-frequency = <62500000>;
+ /delete-property/ clocks;
+};
+
+&uart1 {
+ status = "disabled";
+};
+
+&uart2 {
+ status = "okay";
+ /*
+ * bluetooth-le {
+ * compatible = "brcm,bcm20732";
+ * enable-gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+ *};
+ */
+};
+
+&gmac1 {
+ status = "disabled";
+};
+&gmac2 {
+ status = "disabled";
+};
+&gmac3 {
+ status = "disabled";
+};
+
+&pwm {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_pwm>;
+};
+
+&nandcs {
+ nand-ecc-algo = "hw";
+
+ partitions {
+ /*
+ * The partition autodetection does not work for this device.
+ * It will only detect the "nvram" partition with an incorrect size.
+ * [ 1.721667] 1 bcm47xxpart partitions found on MTD device brcmnand.0
+ * [ 1.727962] Creating 1 MTD partitions on "brcmnand.0":
+ * [ 1.733117] 0x000000400000-0x000008000000 : "nvram"
+ */
+
+ compatible = "fixed-partitions";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+
+ partition0@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition1@100000 {
+ label = "bootkernel1";
+ reg = <0x100000 0x300000>;
+ read-only;
+ };
+
+ partition2@400000 {
+ label = "nvram";
+ reg = <0x400000 0x100000>;
+ read-only;
+ };
+
+ partition3@500000 {
+ label = "bootkernel2";
+ reg = <0x500000 0x300000>;
+ read-only;
+ };
+
+ partition4@800000 {
+ label = "ubi";
+ reg = <0x800000 0x7780000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 0016720..ac3a99c 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -252,6 +252,10 @@ pcie1: pcie@13000 {
reg = <0x00013000 0x1000>;
};
+ pcie2: pcie@14000 {
+ reg = <0x00014000 0x1000>;
+ };
+
usb2: usb2@21000 {
reg = <0x00021000 0x1000>;
@@ -350,6 +354,14 @@ gmac3: ethernet@27000 {
};
};
+ pwm: pwm@18002000 {
+ compatible = "brcm,iproc-pwm";
+ reg = <0x18002000 0x28>;
+ clocks = <&osc>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
mdio: mdio@18003000 {
compatible = "brcm,iproc-mdio";
reg = <0x18003000 0x8>;
@@ -384,6 +396,15 @@ usb3_dmp: syscon@18105000 {
reg = <0x18105000 0x1000>;
};
+ uart2: serial@18008000 {
+ compatible = "ns16550a";
+ reg = <0x18008000 0x20>;
+ clocks = <&iprocslow>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
i2c0: i2c@18009000 {
compatible = "brcm,iproc-i2c";
reg = <0x18009000 0x50>;
@@ -417,12 +438,12 @@ spi-pins {
function = "spi";
};
- i2c {
+ pinmux_i2c: i2c {
groups = "i2c_grp";
function = "i2c";
};
- pwm {
+ pinmux_pwm: pwm {
groups = "pwm0_grp", "pwm1_grp",
"pwm2_grp", "pwm3_grp";
function = "pwm";
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index 716da62..21f922d 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -196,7 +196,7 @@ &sata {
};
&sdio {
- status = "ok";
+ status = "okay";
};
&uart0 {
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 7b84b54..7782b61 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -208,7 +208,7 @@ &sata {
&sdio {
bus-width = <4>;
no-1-8-v;
- status = "ok";
+ status = "okay";
};
&srab {
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index a952d93..38530db 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -537,24 +537,23 @@ &gpio7_target {
ti,no-idle-on-init;
};
-&mac {
+&mac_sw {
status = "okay";
- dual_emac;
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <ðphy0>;
phy-mode = "rgmii";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <ðphy1>;
phy-mode = "rgmii";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};
-&davinci_mdio {
+&davinci_mdio_sw {
ethphy0: ethernet-phy@2 {
reg = <2>;
};
@@ -565,7 +564,7 @@ ethphy1: ethernet-phy@3 {
};
&dcan1 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default", "sleep", "active";
pinctrl-0 = <&dcan1_pins_sleep>;
pinctrl-1 = <&dcan1_pins_sleep>;
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 27a6a83..3bf90d9 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -3038,60 +3038,6 @@ target-module@84000 { /* 0x48484000, ap 3 10.0 */
*/
ti,no-idle;
- mac: ethernet@0 {
- compatible = "ti,dra7-cpsw","ti,cpsw";
- clocks = <&gmac_main_clk>, <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
- clock-names = "fck", "cpts";
- cpdma_channels = <8>;
- ale_entries = <1024>;
- bd_ram_size = <0x2000>;
- mac_control = <0x20>;
- slaves = <2>;
- active_slave = <0>;
- cpts_clock_mult = <0x784CFE14>;
- cpts_clock_shift = <29>;
- reg = <0x0 0x1000
- 0x1200 0x2e00>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- /*
- * rx_thresh_pend
- * rx_pend
- * tx_pend
- * misc_pend
- */
- interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
- ranges = <0 0 0x4000>;
- syscon = <&scm_conf>;
- status = "disabled";
-
- davinci_mdio: mdio@1000 {
- compatible = "ti,cpsw-mdio","ti,davinci_mdio";
- clocks = <&gmac_main_clk>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <0>;
- bus_freq = <1000000>;
- reg = <0x1000 0x100>;
- };
-
- cpsw_emac0: slave@200 {
- /* Filled in by U-Boot */
- mac-address = [ 00 00 00 00 00 00 ];
- phys = <&phy_gmii_sel 1>;
- };
-
- cpsw_emac1: slave@300 {
- /* Filled in by U-Boot */
- mac-address = [ 00 00 00 00 00 00 ];
- phys = <&phy_gmii_sel 2>;
- };
- };
-
mac_sw: switch@0 {
compatible = "ti,dra7-cpsw-switch","ti,cpsw-switch";
reg = <0x0 0x4000>;
@@ -3561,7 +3507,6 @@ timer16: timer@0 {
rtctarget: target-module@38000 { /* 0x48838000, ap 29 12.0 */
compatible = "ti,sysc-omap4-simple", "ti,sysc";
- ti,hwmods = "rtcss";
reg = <0x38074 0x4>,
<0x38078 0x4>;
reg-names = "rev", "sysc";
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index cca6b12..4e1bbc0 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -37,8 +37,8 @@ aliases {
serial7 = &uart8;
serial8 = &uart9;
serial9 = &uart10;
- ethernet0 = &cpsw_emac0;
- ethernet1 = &cpsw_emac1;
+ ethernet0 = &cpsw_port1;
+ ethernet1 = &cpsw_port2;
d_can0 = &dcan1;
d_can1 = &dcan2;
spi0 = &qspi;
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index 10da51b..cad58f7 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -219,26 +219,26 @@ &mmc2 {
vqmmc-supply = <&evm_1v8_sw>;
};
-&mac {
+&mac_sw {
mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
<&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */
<&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */
- dual_emac;
+ status = "okay";
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <&dp83867_0>;
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <&dp83867_1>;
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};
-&davinci_mdio {
+&davinci_mdio_sw {
dp83867_0: ethernet-phy@2 {
reg = <2>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index 9273a7d..b65b2dd 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -462,12 +462,8 @@ wifi@2 {
};
};
-&mac {
- status = "okay";
-};
-
&dcan1 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default", "sleep", "active";
pinctrl-0 = <&dcan1_pins_sleep>;
pinctrl-1 = <&dcan1_pins_sleep>;
@@ -536,11 +532,11 @@ partition@9 {
};
&dss {
- status = "ok";
+ status = "okay";
};
&hdmi {
- status = "ok";
+ status = "okay";
port {
hdmi_out: endpoint {
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
index 54dab0f..f242b93 100644
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ b/arch/arm/boot/dts/dra72-evm-revc.dts
@@ -77,26 +77,26 @@ &pcf_gpio_21 {
interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
};
-&mac {
+&mac_sw {
mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
<&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */
<&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */
- dual_emac;
+ status = "okay";
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <&dp83867_0>;
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <&dp83867_1>;
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};
-&davinci_mdio {
+&davinci_mdio_sw {
dp83867_0: ethernet-phy@2 {
reg = <2>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 6ea9936..5f62f92 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -69,17 +69,22 @@ &pcf_gpio_21 {
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
};
-&mac {
- slaves = <1>;
+&mac_sw {
mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>;
+ status = "okay";
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <ðphy0>;
phy-mode = "rgmii";
+ ti,dual-emac-pvid = <1>;
};
-&davinci_mdio {
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&davinci_mdio_sw {
ethphy0: ethernet-phy@3 {
reg = <3>;
};
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 803981c..9bd01ae 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -475,25 +475,23 @@ &rtc {
status = "disabled";
};
-&mac {
+&mac_sw {
status = "okay";
-
- dual_emac;
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <&dp83867_0>;
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <&dp83867_1>;
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};
-&davinci_mdio {
+&davinci_mdio_sw {
dp83867_0: ethernet-phy@2 {
reg = <2>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
@@ -522,12 +520,12 @@ &usb2_phy2 {
};
&dss {
- status = "ok";
+ status = "okay";
vdda_video-supply = <&ldo5_reg>;
};
&hdmi {
- status = "ok";
+ status = "okay";
vdda-supply = <&ldo1_reg>;
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index 96678dd..ecfaa0b 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -195,7 +195,7 @@ uart3: serial@e1050000 {
clock-names = "sclk";
};
- pfc: pin-controller@e0140200 {
+ pfc: pinctrl@e0140200 {
compatible = "renesas,pfc-emev2";
reg = <0xe0140200 0x100>;
};
diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts
index 052a52f..ad7a085 100644
--- a/arch/arm/boot/dts/ethernut5.dts
+++ b/arch/arm/boot/dts/ethernut5.dts
@@ -15,7 +15,7 @@ chosen {
bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 6c2f320..12887b3 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -55,6 +55,10 @@ &adc {
assigned-clock-rates = <6000000>;
};
+&cmu {
+ clocks = <&xusbxti>;
+};
+
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index ca29d7e..c1a68e6 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -26,7 +26,7 @@ aliases {
memory@40000000 {
device_type = "memory";
- reg = <0x40000000 0x1ff00000>;
+ reg = <0x40000000 0x1ff00000>;
};
firmware@205f000 {
@@ -164,6 +164,10 @@ &bus_dmc {
status = "okay";
};
+&cmu {
+ clocks = <&xusbxti>;
+};
+
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index aba8350..b55afaa 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -30,7 +30,7 @@ chosen {
memory@40000000 {
device_type = "memory";
- reg = <0x40000000 0x1ff00000>;
+ reg = <0x40000000 0x1ff00000>;
};
firmware@205f000 {
@@ -205,6 +205,10 @@ &bus_mfc {
status = "okay";
};
+&cmu {
+ clocks = <&xusbxti>;
+};
+
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index d3fb45a..a1e93fb 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -97,33 +97,25 @@ cpu1: cpu@1 {
};
};
- fixed-rate-clocks {
- #address-cells = <1>;
- #size-cells = <0>;
+ xusbxti: clock-0 {
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ #clock-cells = <0>;
+ clock-output-names = "xusbxti";
+ };
- xusbxti: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- clock-frequency = <0>;
- #clock-cells = <0>;
- clock-output-names = "xusbxti";
- };
+ xxti: clock-1 {
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ #clock-cells = <0>;
+ clock-output-names = "xxti";
+ };
- xxti: clock@1 {
- compatible = "fixed-clock";
- reg = <1>;
- clock-frequency = <0>;
- #clock-cells = <0>;
- clock-output-names = "xxti";
- };
-
- xtcxo: clock@2 {
- compatible = "fixed-clock";
- reg = <2>;
- clock-frequency = <0>;
- #clock-cells = <0>;
- clock-output-names = "xtcxo";
- };
+ xtcxo: clock-2 {
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ #clock-cells = <0>;
+ clock-output-names = "xtcxo";
};
pmu {
@@ -362,7 +354,7 @@ sysmmu_fimd0: sysmmu@11e20000 {
};
hsotg: hsotg@12480000 {
- compatible = "samsung,s3c6400-hsotg", "snps,dwc2";
+ compatible = "samsung,s3c6400-hsotg";
reg = <0x12480000 0x20000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_USBOTG>;
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
index 6d0c04d..5370ee4 100644
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -123,7 +123,7 @@ wlan_pwrseq: sdhci3-pwrseq {
reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
};
- i2c_max17042_fuel: i2c-gpio {
+ i2c_max17042_fuel: i2c-gpio-0 {
compatible = "i2c-gpio";
#address-cells = <1>;
#size-cells = <0>;
@@ -147,7 +147,7 @@ battery@36 {
};
};
- spi-lcd {
+ spi-3 {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
@@ -209,20 +209,12 @@ xusbxti {
compatible = "samsung,clock-xusbxti";
clock-frequency = <24000000>;
};
- };
- thermal-zones {
- cpu_thermal: cpu-thermal {
- cooling-maps {
- map0 {
- /* Corresponds to 800MHz */
- cooling-device = <&cpu0 2 2>;
- };
- map1 {
- /* Corresponds to 200MHz */
- cooling-device = <&cpu0 4 4>;
- };
- };
+ pmic_ap_clk: pmic-ap-clk {
+ /* Workaround for missing clock on max8997 PMIC */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
};
};
};
@@ -235,6 +227,19 @@ &cpu0 {
cpu0-supply = <&varm_breg>;
};
+&cpu_thermal {
+ cooling-maps {
+ map0 {
+ /* Corresponds to 800MHz */
+ cooling-device = <&cpu0 2 2>;
+ };
+ map1 {
+ /* Corresponds to 200MHz */
+ cooling-device = <&cpu0 4 4>;
+ };
+ };
+};
+
&ehci {
status = "okay";
@@ -304,8 +309,6 @@ &gpu {
status = "okay";
mali-supply = <&vg3d_breg>;
- regulator-microvolt-offset = <50000>;
- regulator-microsecs-delay = <50>;
};
&hsotg {
@@ -524,6 +527,7 @@ vg3d_breg: BUCK3 {
regulator-name = "G3D_1.1V";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1200000>;
+ regulator-microvolt-offset = <50000>;
regulator-always-on;
};
@@ -569,6 +573,16 @@ chargercv_reg: CHARGER_CV {
regulator-max-microvolt = <4100000>;
regulator-always-on;
};
+
+ EN32KHZ_AP {
+ regulator-name = "EN32KHZ_AP";
+ regulator-always-on;
+ };
+
+ EN32KHZ_CP {
+ regulator-name = "EN32KHZ_CP";
+ regulator-always-on;
+ };
};
};
};
@@ -667,7 +681,7 @@ otg_gp: otg-gp {
samsung,pin-val = <0>;
};
- mag_mhl_gpio: mag-mhl-gpio {
+ mag_mhl_gpio: mag-mhl {
samsung,pins = "gpd0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -689,6 +703,12 @@ tsp224_irq: tsp224-irq {
};
};
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+ clock-names = "rtc", "rtc_src";
+};
+
&sdhci_0 {
status = "okay";
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 890525b..7d2cfba 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -100,6 +100,13 @@ xusbxti {
compatible = "samsung,clock-xusbxti";
clock-frequency = <24000000>;
};
+
+ pmic_ap_clk: pmic-ap-clk {
+ /* Workaround for missing clock on max8997 PMIC */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
};
display-timings {
@@ -122,6 +129,19 @@ &cpu0 {
cpu0-supply = <&buck1_reg>;
};
+&cpu_thermal {
+ cooling-maps {
+ map0 {
+ /* Corresponds to 800MHz */
+ cooling-device = <&cpu0 2 2>;
+ };
+ map1 {
+ /* Corresponds to 200MHz */
+ cooling-device = <&cpu0 4 4>;
+ };
+ };
+};
+
&exynos_usbphy {
status = "okay";
};
@@ -286,6 +306,11 @@ buck7_reg: BUCK7 {
regulator-boot-on;
regulator-always-on;
};
+
+ EN32KHZ_AP {
+ regulator-name = "EN32KHZ_AP";
+ regulator-always-on;
+ };
};
};
};
@@ -331,6 +356,8 @@ &serial_3 {
&rtc {
status = "okay";
+ clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+ clock-names = "rtc", "rtc_src";
};
&tmu {
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 77fc11e..c5609af 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -40,6 +40,26 @@ xusbxti {
compatible = "samsung,clock-xusbxti";
clock-frequency = <24000000>;
};
+
+ pmic_ap_clk: pmic-ap-clk {
+ /* Workaround for missing clock on PMIC */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+};
+
+&cpu_thermal {
+ cooling-maps {
+ map0 {
+ /* Corresponds to 800MHz */
+ cooling-device = <&cpu0 2 2>;
+ };
+ map1 {
+ /* Corresponds to 200MHz */
+ cooling-device = <&cpu0 4 4>;
+ };
};
};
@@ -148,6 +168,11 @@ keypad_cols: keypad-cols {
};
};
+&rtc {
+ clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+ clock-names = "rtc", "rtc_src";
+};
+
&sdhci_2 {
bus-width = <4>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 5cc96f0..a226bec 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -132,23 +132,14 @@ xusbxti {
compatible = "samsung,clock-xusbxti";
clock-frequency = <24000000>;
};
- };
- thermal-zones {
- cpu_thermal: cpu-thermal {
- cooling-maps {
- map0 {
- /* Corresponds to 800MHz at freq_table */
- cooling-device = <&cpu0 2 2>, <&cpu1 2 2>;
- };
- map1 {
- /* Corresponds to 200MHz at freq_table */
- cooling-device = <&cpu0 4 4>, <&cpu1 4 4>;
- };
- };
+ pmic_ap_clk: pmic-ap-clk {
+ /* Workaround for missing clock on max8997 PMIC */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
};
};
-
};
&camera {
@@ -161,6 +152,19 @@ &cpu0 {
cpu0-supply = <&varm_breg>;
};
+&cpu_thermal {
+ cooling-maps {
+ map0 {
+ /* Corresponds to 800MHz at freq_table */
+ cooling-device = <&cpu0 2 2>, <&cpu1 2 2>;
+ };
+ map1 {
+ /* Corresponds to 200MHz at freq_table */
+ cooling-device = <&cpu0 4 4>, <&cpu1 4 4>;
+ };
+ };
+};
+
&dsi_0 {
vddcore-supply = <&vusb_reg>;
vddio-supply = <&vmipi_reg>;
@@ -314,140 +318,156 @@ max8997_pmic@66 {
regulators {
valive_reg: LDO2 {
- regulator-name = "VALIVE_1.1V_C210";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
+ regulator-name = "VALIVE_1.1V_C210";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
};
vusb_reg: LDO3 {
- regulator-name = "VUSB_1.1V_C210";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
+ regulator-name = "VUSB_1.1V_C210";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
};
vmipi_reg: LDO4 {
- regulator-name = "VMIPI_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-name = "VMIPI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
vpda_reg: LDO6 {
- regulator-name = "VCC_1.8V_PDA";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
+ regulator-name = "VCC_1.8V_PDA";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
vcam_reg: LDO7 {
- regulator-name = "CAM_ISP_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-name = "CAM_ISP_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
vusbdac_reg: LDO8 {
- regulator-name = "VUSB+VDAC_3.3V_C210";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+ regulator-name = "VUSB+VDAC_3.3V_C210";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
};
vccpda_reg: LDO9 {
- regulator-name = "VCC_2.8V_PDA";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
+ regulator-name = "VCC_2.8V_PDA";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
};
vpll_reg: LDO10 {
- regulator-name = "VPLL_1.1V_C210";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
+ regulator-name = "VPLL_1.1V_C210";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
};
vtcam_reg: LDO12 {
- regulator-name = "VT_CAM_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-name = "VT_CAM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
vcclcd_reg: LDO13 {
- regulator-name = "VCC_3.3V_LCD";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+ regulator-name = "VCC_3.3V_LCD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
};
vlcd_reg: LDO15 {
- regulator-name = "VLCD_2.2V";
- regulator-min-microvolt = <2200000>;
- regulator-max-microvolt = <2200000>;
+ regulator-name = "VLCD_2.2V";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
};
camsensor_reg: LDO16 {
- regulator-name = "CAM_SENSOR_IO_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-name = "CAM_SENSOR_IO_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
tflash_reg: LDO17 {
- regulator-name = "VTF_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
+ regulator-name = "VTF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
};
vddq_reg: LDO21 {
- regulator-name = "VDDQ_M1M2_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
+ regulator-name = "VDDQ_M1M2_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
};
varm_breg: BUCK1 {
- regulator-name = "VARM_1.2V_C210";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
+ regulator-name = "VARM_1.2V_C210";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
};
vint_breg: BUCK2 {
- regulator-name = "VINT_1.1V_C210";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
+ regulator-name = "VINT_1.1V_C210";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
};
camisp_breg: BUCK4 {
- regulator-name = "CAM_ISP_CORE_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
+ regulator-name = "CAM_ISP_CORE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
};
vmem_breg: BUCK5 {
- regulator-name = "VMEM_1.2V_C210";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
+ regulator-name = "VMEM_1.2V_C210";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
};
vccsub_breg: BUCK7 {
- regulator-name = "VCC_SUB_2.0V";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- regulator-always-on;
+ regulator-name = "VCC_SUB_2.0V";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
};
safe1_sreg: ESAFEOUT1 {
- regulator-name = "SAFEOUT1";
+ regulator-name = "SAFEOUT1";
};
safe2_sreg: ESAFEOUT2 {
- regulator-name = "SAFEOUT2";
- regulator-boot-on;
+ regulator-name = "SAFEOUT2";
+ regulator-boot-on;
+ };
+
+ EN32KHZ_AP {
+ regulator-name = "EN32KHZ_AP";
+ regulator-always-on;
+ };
+
+ EN32KHZ_CP {
+ regulator-name = "EN32KHZ_CP";
+ regulator-always-on;
};
};
};
};
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+ clock-names = "rtc", "rtc_src";
+};
+
&sdhci_0 {
bus-width = <8>;
non-removable;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 99ce53b..08284e8 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -39,10 +39,17 @@ xusbxti {
compatible = "samsung,clock-xusbxti";
clock-frequency = <24000000>;
};
+
+ pmic_ap_clk: pmic-ap-clk {
+ /* Workaround for missing clock on PMIC */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
};
vemmc_reg: voltage-regulator {
- compatible = "regulator-fixed";
+ compatible = "regulator-fixed";
regulator-name = "VMEM_VDD_2_8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
@@ -104,7 +111,7 @@ ok-key {
};
tsp_reg: voltage-regulator {
- compatible = "regulator-fixed";
+ compatible = "regulator-fixed";
regulator-name = "TSP_2_8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
@@ -112,13 +119,13 @@ tsp_reg: voltage-regulator {
enable-active-high;
};
- spi-lcd {
+ spi-3 {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
- gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>;
- gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>;
+ sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>;
@@ -192,6 +199,19 @@ &cpu0 {
cpu0-supply = <&vdd_arm_reg>;
};
+&cpu_thermal {
+ cooling-maps {
+ map0 {
+ /* Corresponds to 800MHz */
+ cooling-device = <&cpu0 2 2>;
+ };
+ map1 {
+ /* Corresponds to 200MHz */
+ cooling-device = <&cpu0 4 4>;
+ };
+ };
+};
+
&ehci {
status = "okay";
phys = <&exynos_usbphy 1>;
@@ -537,6 +557,12 @@ &pwm {
status = "okay";
};
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+ clock-names = "rtc", "rtc_src";
+};
+
&sdhci_0 {
bus-width = <8>;
non-removable;
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 33435ce..fddc661 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -102,6 +102,8 @@ l2c: cache-controller@10502000 {
reg = <0x10502000 0x1000>;
cache-unified;
cache-level = <2>;
+ prefetch-data = <1>;
+ prefetch-instr = <1>;
arm,tag-latency = <2 2 1>;
arm,data-latency = <2 2 1>;
};
@@ -363,26 +365,24 @@ opp-200000000 {
};
};
};
+};
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&tmu 0>;
+&cpu_alert0 {
+ temperature = <85000>; /* millicelsius */
+};
- trips {
- cpu_alert0: cpu-alert-0 {
- temperature = <85000>; /* millicelsius */
- };
- cpu_alert1: cpu-alert-1 {
- temperature = <100000>; /* millicelsius */
- };
- cpu_alert2: cpu-alert-2 {
- temperature = <110000>; /* millicelsius */
- };
- };
- };
- };
+&cpu_alert1 {
+ temperature = <100000>; /* millicelsius */
+};
+
+&cpu_alert2 {
+ temperature = <110000>; /* millicelsius */
+};
+
+&cpu_thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tmu 0>;
};
&gic {
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index 53b3ca3..89ed81f 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -33,7 +33,7 @@ flash-led {
};
};
- lcd_vdd3_reg: voltage-regulator-7 {
+ lcd_vdd3_reg: voltage-regulator-10 {
compatible = "regulator-fixed";
regulator-name = "LCD_VDD_2.2V";
regulator-min-microvolt = <2200000>;
@@ -42,7 +42,7 @@ lcd_vdd3_reg: voltage-regulator-7 {
enable-active-high;
};
- ps_als_reg: voltage-regulator-8 {
+ ps_als_reg: voltage-regulator-11 {
compatible = "regulator-fixed";
regulator-name = "LED_A_3.0V";
regulator-min-microvolt = <3000000>;
@@ -171,6 +171,44 @@ &s5c73m3 {
status = "okay";
};
+&sound {
+ samsung,audio-routing =
+ "HP", "HPOUT1L",
+ "HP", "HPOUT1R",
+
+ "SPK", "SPKOUTLN",
+ "SPK", "SPKOUTLP",
+ "SPK", "SPKOUTRN",
+ "SPK", "SPKOUTRP",
+
+ "RCV", "HPOUT2N",
+ "RCV", "HPOUT2P",
+
+ "HDMI", "LINEOUT1N",
+ "HDMI", "LINEOUT1P",
+
+ "LINE", "LINEOUT2N",
+ "LINE", "LINEOUT2P",
+
+ "IN1LP", "MICBIAS1",
+ "IN1LN", "MICBIAS1",
+ "Main Mic", "MICBIAS1",
+
+ "IN1RP", "Sub Mic",
+ "IN1RN", "Sub Mic",
+
+ "IN2LP:VXRN", "MICBIAS2",
+ "Headset Mic", "MICBIAS2",
+
+ "IN2RN", "FM In",
+ "IN2RP:VXRP", "FM In";
+};
+
+&submic_bias_reg {
+ gpio = <&gpf2 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+};
+
&touchkey_reg {
gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>;
status = "okay";
diff --git a/arch/arm/boot/dts/exynos4412-i9300.dts b/arch/arm/boot/dts/exynos4412-i9300.dts
index f8125a9..07fbcf8 100644
--- a/arch/arm/boot/dts/exynos4412-i9300.dts
+++ b/arch/arm/boot/dts/exynos4412-i9300.dts
@@ -17,6 +17,10 @@ / {
memory@40000000 {
device_type = "memory";
- reg = <0x40000000 0x40000000>;
+ reg = <0x40000000 0x40000000>;
};
};
+
+&sound {
+ fm-sel-gpios = <&gpl0 3 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/exynos4412-i9305.dts b/arch/arm/boot/dts/exynos4412-i9305.dts
index 54a2a55..6bc3d89 100644
--- a/arch/arm/boot/dts/exynos4412-i9305.dts
+++ b/arch/arm/boot/dts/exynos4412-i9305.dts
@@ -10,7 +10,7 @@ / {
memory@40000000 {
device_type = "memory";
- reg = <0x40000000 0x80000000>;
+ reg = <0x40000000 0x80000000>;
};
};
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 2c8111c..7e7c243 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -37,12 +37,12 @@ firmware@204f000 {
fixed-rate-clocks {
xxti {
- compatible = "samsung,clock-xxti", "fixed-clock";
+ compatible = "samsung,clock-xxti";
clock-frequency = <0>;
};
xusbxti {
- compatible = "samsung,clock-xusbxti", "fixed-clock";
+ compatible = "samsung,clock-xusbxti";
clock-frequency = <24000000>;
};
};
@@ -102,6 +102,30 @@ touchkey_reg: voltage-regulator-6 {
status = "disabled";
};
+ vbatt_reg: voltage-regulator-7 {
+ compatible = "regulator-fixed";
+ regulator-name = "VBATT";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ mic_bias_reg: voltage-regulator-8 {
+ compatible = "regulator-fixed";
+ regulator-name = "MICBIAS_LDO_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpf1 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ submic_bias_reg: voltage-regulator-9 {
+ compatible = "regulator-fixed";
+ regulator-name = "SUB_MICBIAS_LDO_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
@@ -266,16 +290,18 @@ wlan_pwrseq: sdhci3-pwrseq {
clock-names = "ext_clock";
};
- sound {
- compatible = "samsung,trats2-audio";
- samsung,i2s-controller = <&i2s0>;
- samsung,model = "Trats2";
- samsung,audio-codec = <&wm1811>;
- samsung,audio-routing =
- "SPK", "SPKOUTLN",
- "SPK", "SPKOUTLP",
- "SPK", "SPKOUTRN",
- "SPK", "SPKOUTRP";
+ sound: sound {
+ compatible = "samsung,midas-audio";
+ model = "Midas";
+ mic-bias-supply = <&mic_bias_reg>;
+ submic-bias-supply = <&submic_bias_reg>;
+
+ cpu {
+ sound-dai = <&i2s0 0>;
+ };
+ codec {
+ sound-dai = <&wm1811>;
+ };
};
thermistor-ap {
@@ -293,25 +319,6 @@ thermistor-battery {
pulldown-ohm = <100000>; /* 100K */
io-channels = <&adc 2>; /* Battery temperature */
};
-
- thermal-zones {
- cpu_thermal: cpu-thermal {
- cooling-maps {
- map0 {
- /* Corresponds to 800MHz at freq_table */
- cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
- <&cpu2 7 7>, <&cpu3 7 7>;
- };
- map1 {
- /* Corresponds to 200MHz at freq_table */
- cooling-device = <&cpu0 13 13>,
- <&cpu1 13 13>,
- <&cpu2 13 13>,
- <&cpu3 13 13>;
- };
- };
- };
- };
};
&adc {
@@ -380,6 +387,21 @@ &cpu0 {
cpu0-supply = <&buck2_reg>;
};
+&cpu_thermal {
+ cooling-maps {
+ map0 {
+ /* Corresponds to 800MHz at freq_table */
+ cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+ <&cpu2 7 7>, <&cpu3 7 7>;
+ };
+ map1 {
+ /* Corresponds to 200MHz at freq_table */
+ cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
+ <&cpu2 13 13>, <&cpu3 13 13>;
+ };
+ };
+};
+
&csis_0 {
status = "okay";
vddcore-supply = <&ldo8_reg>;
@@ -597,11 +619,37 @@ &i2c_4 {
wm1811: wm1811@1a {
compatible = "wlf,wm1811";
reg = <0x1a>;
- clocks = <&pmu_system_controller 0>;
- clock-names = "MCLK1";
- DCVDD-supply = <&ldo3_reg>;
+ clocks = <&pmu_system_controller 0>,
+ <&max77686 MAX77686_CLK_PMIC>;
+ clock-names = "MCLK1", "MCLK2";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ #sound-dai-cells = <0>;
+
+ wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0
+ 0x0 0x8000 0x0 0x0 0x0>;
+ wlf,micbias-cfg = <0x2f 0x2b>;
+
+ wlf,lineout1-feedback;
+ wlf,lineout1-se;
+ wlf,lineout2-se;
+ wlf,ldoena-always-driven;
+
+ AVDD2-supply = <&vbatt_reg>;
DBVDD1-supply = <&ldo3_reg>;
+ DBVDD2-supply = <&vbatt_reg>;
+ DBVDD3-supply = <&vbatt_reg>;
+ DCVDD-supply = <&ldo3_reg>;
+ CPVDD-supply = <&vbatt_reg>;
+ SPKVDD1-supply = <&vbatt_reg>;
+ SPKVDD2-supply = <&vbatt_reg>;
wlf,ldo1ena = <&gpj0 4 0>;
+ wlf,ldo2ena = <&gpj0 4 0>;
};
};
diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts
index 4189e1f..a47b7f3 100644
--- a/arch/arm/boot/dts/exynos4412-n710x.dts
+++ b/arch/arm/boot/dts/exynos4412-n710x.dts
@@ -8,12 +8,12 @@ / {
memory@40000000 {
device_type = "memory";
- reg = <0x40000000 0x80000000>;
+ reg = <0x40000000 0x80000000>;
};
/* bootargs are passed in by bootloader */
- cam_vdda_reg: voltage-regulator-7 {
+ cam_vdda_reg: voltage-regulator-10 {
compatible = "regulator-fixed";
regulator-name = "CAM_SENSOR_CORE_1.2V";
regulator-min-microvolt = <1200000>;
@@ -74,6 +74,41 @@ &s5c73m3 {
status = "okay";
};
+&sound {
+ samsung,audio-routing =
+ "HP", "HPOUT1L",
+ "HP", "HPOUT1R",
+
+ "SPK", "SPKOUTLN",
+ "SPK", "SPKOUTLP",
+
+ "RCV", "HPOUT2N",
+ "RCV", "HPOUT2P",
+
+ "HDMI", "LINEOUT1N",
+ "HDMI", "LINEOUT1P",
+
+ "LINE", "LINEOUT2N",
+ "LINE", "LINEOUT2P",
+
+ "IN1LP", "MICBIAS2",
+ "IN1LN", "MICBIAS2",
+ "Headset Mic", "MICBIAS2",
+
+ "IN1RP", "Sub Mic",
+ "IN1RN", "Sub Mic",
+
+ "IN2LP:VXRN", "Main Mic",
+ "IN2LN", "Main Mic",
+
+ "IN2RN", "FM In",
+ "IN2RP:VXRP", "FM In";
+};
+
+&submic_bias_reg {
+ regulator-always-on;
+};
+
&touchkey_reg {
gpio = <&gpm0 5 GPIO_ACTIVE_HIGH>;
status = "okay";
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index a5c1ce1..ab291ce 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -66,25 +66,6 @@ xusbxti {
clock-frequency = <24000000>;
};
};
-
- thermal-zones {
- cpu_thermal: cpu-thermal {
- cooling-maps {
- cooling_map0: map0 {
- /* Corresponds to 800MHz at freq_table */
- cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
- <&cpu2 7 7>, <&cpu3 7 7>;
- };
- cooling_map1: map1 {
- /* Corresponds to 200MHz at freq_table */
- cooling-device = <&cpu0 13 13>,
- <&cpu1 13 13>,
- <&cpu2 13 13>,
- <&cpu3 13 13>;
- };
- };
- };
- };
};
&bus_dmc {
@@ -141,6 +122,7 @@ &camera {
};
&clock {
+ clocks = <&clock CLK_XUSBXTI>;
assigned-clocks = <&clock CLK_FOUT_EPLL>;
assigned-clock-rates = <45158401>;
};
@@ -174,6 +156,21 @@ opp-800000000 {
};
};
+&cpu_thermal {
+ cooling-maps {
+ cooling_map0: map0 {
+ /* Corresponds to 800MHz at freq_table */
+ cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+ <&cpu2 7 7>, <&cpu3 7 7>;
+ };
+ cooling_map1: map1 {
+ /* Corresponds to 200MHz at freq_table */
+ cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
+ <&cpu2 13 13>, <&cpu3 13 13>;
+ };
+ };
+};
+
&pinctrl_1 {
gpio_power_key: power_key {
samsung,pins = "gpx1-3";
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index 8ff243b..b8549d8 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -37,31 +37,6 @@ fan0: pwm-fan {
#cooling-cells = <2>;
cooling-levels = <0 102 170 230>;
};
-
- thermal-zones {
- cpu_thermal: cpu-thermal {
- cooling-maps {
- map0 {
- trip = <&cpu_alert1>;
- cooling-device = <&cpu0 9 9>, <&cpu1 9 9>,
- <&cpu2 9 9>, <&cpu3 9 9>,
- <&fan0 1 2>;
- };
- map1 {
- trip = <&cpu_alert2>;
- cooling-device = <&cpu0 15 15>,
- <&cpu1 15 15>,
- <&cpu2 15 15>,
- <&cpu3 15 15>,
- <&fan0 2 3>;
- };
- map2 {
- trip = <&cpu_alert0>;
- cooling-device = <&fan0 0 1>;
- };
- };
- };
- };
};
&adc {
@@ -76,6 +51,27 @@ &buck8_reg {
regulator-max-microvolt = <3300000>;
};
+&cpu_thermal {
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&cpu0 9 9>, <&cpu1 9 9>,
+ <&cpu2 9 9>, <&cpu3 9 9>,
+ <&fan0 1 2>;
+ };
+ map1 {
+ trip = <&cpu_alert2>;
+ cooling-device = <&cpu0 15 15>, <&cpu1 15 15>,
+ <&cpu2 15 15>, <&cpu3 15 15>,
+ <&fan0 2 3>;
+ };
+ map2 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&fan0 0 1>;
+ };
+ };
+};
+
&hdmicec {
needs-hpd;
};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 8b11ad3..c2e793b 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -11,6 +11,7 @@
/dts-v1/;
#include "exynos4412.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "exynos-mfc-reserved-memory.dtsi"
@@ -74,6 +75,21 @@ &cpu0 {
cpu0-supply = <&buck2_reg>;
};
+&cpu_thermal {
+ cooling-maps {
+ cooling_map0: map0 {
+ /* Corresponds to 800MHz at freq_table */
+ cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+ <&cpu2 7 7>, <&cpu3 7 7>;
+ };
+ cooling_map1: map1 {
+ /* Corresponds to 200MHz at freq_table */
+ cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
+ <&cpu2 13 13>, <&cpu3 13 13>;
+ };
+ };
+};
+
&exynos_usbphy {
status = "okay";
};
@@ -129,6 +145,13 @@ s5m8767_pmic@66 {
<1200000>, <1200000>,
<1200000>, <1200000>;
+ s5m8767_osc: clocks {
+ compatible = "samsung,s5m8767-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s5m8767_ap", "s5m8767_cp",
+ "s5m8767_bt";
+ };
+
regulators {
ldo1_reg: LDO1 {
regulator-name = "VDD_ALIVE";
@@ -499,6 +522,8 @@ keypad_cols: keypad-cols {
&rtc {
status = "okay";
+ clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
};
&sdhci_2 {
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index e70fb6e..4997120 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -37,6 +37,28 @@ xusbxti {
compatible = "samsung,clock-xusbxti";
clock-frequency = <24000000>;
};
+
+ pmic_ap_clk: pmic-ap-clk {
+ /* Workaround for missing clock on PMIC */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+};
+
+&cpu_thermal {
+ cooling-maps {
+ cooling_map0: map0 {
+ /* Corresponds to 800MHz at freq_table */
+ cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+ <&cpu2 7 7>, <&cpu3 7 7>;
+ };
+ cooling_map1: map1 {
+ /* Corresponds to 200MHz at freq_table */
+ cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
+ <&cpu2 13 13>, <&cpu3 13 13>;
+ };
};
};
@@ -127,6 +149,11 @@ keypad_cols: keypad-cols {
};
};
+&rtc {
+ clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+ clock-names = "rtc", "rtc_src";
+};
+
&sdhci_2 {
bus-width = <4>;
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
index 3a91de8..017b261 100644
--- a/arch/arm/boot/dts/exynos4412-tiny4412.dts
+++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
@@ -65,6 +65,13 @@ xusbxti {
compatible = "samsung,clock-xusbxti";
clock-frequency = <24000000>;
};
+
+ pmic_ap_clk: pmic-ap-clk {
+ /* Workaround for missing clock on PMIC */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
};
panel {
@@ -78,6 +85,21 @@ panel_input: endpoint {
};
};
+&cpu_thermal {
+ cooling-maps {
+ cooling_map0: map0 {
+ /* Corresponds to 800MHz at freq_table */
+ cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+ <&cpu2 7 7>, <&cpu3 7 7>;
+ };
+ cooling_map1: map1 {
+ /* Corresponds to 200MHz at freq_table */
+ cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
+ <&cpu2 13 13>, <&cpu3 13 13>;
+ };
+ };
+};
+
&fimd {
pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
pinctrl-names = "default";
@@ -95,6 +117,8 @@ lcdc_output: endpoint {
&rtc {
status = "okay";
+ clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+ clock-names = "rtc", "rtc_src";
};
&sdhci_2 {
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index aac5339..7b447b6 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -18,7 +18,7 @@ / {
memory@40000000 {
device_type = "memory";
- reg = <0x40000000 0x40000000>;
+ reg = <0x40000000 0x40000000>;
};
chosen {
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 7002832..e76881d 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -76,7 +76,7 @@ cpu3: cpu@a03 {
};
};
- cpu0_opp_table: opp_table0 {
+ cpu0_opp_table: opp-table0 {
compatible = "operating-points-v2";
opp-shared;
@@ -218,6 +218,8 @@ l2c: cache-controller@10502000 {
reg = <0x10502000 0x1000>;
cache-unified;
cache-level = <2>;
+ prefetch-data = <1>;
+ prefetch-instr = <1>;
arm,tag-latency = <2 2 1>;
arm,data-latency = <3 2 1>;
arm,double-linefill = <1>;
@@ -400,7 +402,7 @@ bus_c2c: bus_c2c {
status = "disabled";
};
- bus_dmc_opp_table: opp_table1 {
+ bus_dmc_opp_table: opp-table1 {
compatible = "operating-points-v2";
opp-shared;
@@ -427,7 +429,7 @@ opp-400000000 {
};
};
- bus_acp_opp_table: opp_table2 {
+ bus_acp_opp_table: opp-table2 {
compatible = "operating-points-v2";
opp-shared;
@@ -493,7 +495,7 @@ bus_mfc: bus_mfc {
status = "disabled";
};
- bus_leftbus_opp_table: opp_table3 {
+ bus_leftbus_opp_table: opp-table3 {
compatible = "operating-points-v2";
opp-shared;
@@ -516,7 +518,7 @@ opp-200000000 {
};
};
- bus_display_opp_table: opp_table4 {
+ bus_display_opp_table: opp-table4 {
compatible = "operating-points-v2";
opp-shared;
@@ -528,7 +530,7 @@ opp-200000000 {
};
};
- bus_fsys_opp_table: opp_table5 {
+ bus_fsys_opp_table: opp-table5 {
compatible = "operating-points-v2";
opp-shared;
@@ -540,7 +542,7 @@ opp-134000000 {
};
};
- bus_peri_opp_table: opp_table6 {
+ bus_peri_opp_table: opp-table6 {
compatible = "operating-points-v2";
opp-shared;
@@ -732,7 +734,7 @@ &gpu {
"pmu";
operating-points-v2 = <&gpu_opp_table>;
- gpu_opp_table: opp_table {
+ gpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-160000000 {
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 22eb951..9ce9fb3 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -86,7 +86,7 @@ combiner: interrupt-controller@10440000 {
};
gic: interrupt-controller@10481000 {
- compatible = "arm,gic-400", "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x10481000 0x1000>,
@@ -211,13 +211,13 @@ sss: sss@10830000 {
};
prng: rng@10830400 {
- compatible = "samsung,exynos5250-prng";
- reg = <0x10830400 0x200>;
+ compatible = "samsung,exynos5250-prng";
+ reg = <0x10830400 0x200>;
};
trng: rng@10830600 {
- compatible = "samsung,exynos5250-trng";
- reg = <0x10830600 0x100>;
+ compatible = "samsung,exynos5250-trng";
+ reg = <0x10830600 0x100>;
};
g2d: g2d@10850000 {
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 59872d8..79546f1 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -243,11 +243,11 @@ s5m8767_pmic@66 {
s5m8767,pmic-buck3-dvs-voltage = <1100000>;
s5m8767,pmic-buck4-dvs-voltage = <1200000>;
s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
- <&gpd1 1 GPIO_ACTIVE_HIGH>,
- <&gpd1 2 GPIO_ACTIVE_HIGH>;
+ <&gpd1 1 GPIO_ACTIVE_HIGH>,
+ <&gpd1 2 GPIO_ACTIVE_HIGH>;
s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
- <&gpx2 4 GPIO_ACTIVE_HIGH>,
- <&gpx2 5 GPIO_ACTIVE_HIGH>;
+ <&gpx2 4 GPIO_ACTIVE_HIGH>,
+ <&gpx2 5 GPIO_ACTIVE_HIGH>;
s5m8767_osc: clocks {
compatible = "samsung,s5m8767-clk";
@@ -542,12 +542,6 @@ &i2c_9 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <40000>;
- samsung,i2c-slave-addr = <0x38>;
-
- sata_phy_i2c:sata-phy@38 {
- compatible = "samsung,exynos-sataphy-i2c";
- reg = <0x38>;
- };
};
&i2s0 {
@@ -619,12 +613,16 @@ &sata_phy {
samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
};
+&sata_phy_i2c {
+ status = "okay";
+};
+
&soc {
/*
* For unknown reasons HDMI-DDC does not work with Exynos I2C
* controllers. Lets use software I2C over GPIO pins as a workaround.
*/
- i2c_ddc: i2c-gpio {
+ i2c_ddc: i2c-10 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_gpio_bus>;
status = "okay";
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 5c42df0..186790f 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -7,6 +7,7 @@
*/
/dts-v1/;
+#include <dt-bindings/clock/maxim,max77686.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos5250.dtsi"
@@ -129,13 +130,14 @@ eeprom@50 {
reg = <0x50>;
};
- max77686@9 {
+ max77686: pmic@9 {
compatible = "maxim,max77686";
reg = <0x09>;
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&max77686_irq>;
+ #clock-cells = <1>;
wakeup-source;
voltage-regulators {
@@ -324,12 +326,6 @@ &i2c_9 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <40000>;
- samsung,i2c-slave-addr = <0x38>;
-
- sata_phy_i2c: sata-phy@38 {
- compatible = "samsung,exynos-sataphy-i2c";
- reg = <0x38>;
- };
};
&i2s0 {
@@ -368,6 +364,8 @@ &mmc_2 {
&rtc {
status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
};
&sata {
@@ -379,6 +377,10 @@ &sata_phy {
samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
};
+&sata_phy_i2c {
+ status = "okay";
+};
+
&spi_1 {
status = "okay";
cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index 3d50192..a92ade3 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -7,6 +7,7 @@
*/
/dts-v1/;
+#include <dt-bindings/clock/samsung,s2mps11.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
@@ -114,12 +115,12 @@ s5m8767-pmic@66 {
wakeup-source;
s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
- <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
- <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
+ <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
+ <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
- <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
- <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
+ <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
+ <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
/*
* The following arrays of DVS voltages are not used, since we are
@@ -127,26 +128,26 @@ s5m8767-pmic@66 {
* to please the driver.
*/
s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
- <1250000>, <1200000>,
- <1150000>, <1100000>,
- <1000000>, <950000>;
+ <1250000>, <1200000>,
+ <1150000>, <1100000>,
+ <1000000>, <950000>;
s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
- <1100000>, <1100000>,
- <1000000>, <1000000>,
- <1000000>, <1000000>;
+ <1100000>, <1100000>,
+ <1000000>, <1000000>,
+ <1000000>, <1000000>;
s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
- <1200000>, <1200000>,
- <1200000>, <1200000>,
- <1200000>, <1200000>;
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
- clocks {
+ s5m8767_osc: clocks {
compatible = "samsung,s5m8767-clk";
#clock-cells = <1>;
clock-output-names = "en32khz_ap",
- "en32khz_cp",
- "en32khz_bt";
+ "en32khz_cp",
+ "en32khz_bt";
};
regulators {
@@ -456,7 +457,7 @@ s5m8767_dvs: s5m8767-dvs {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- dp_hpd_gpio: dp-hpd-gpio {
+ dp_hpd_gpio: dp-hpd {
samsung,pins = "gpc3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -522,6 +523,12 @@ hsic_reset: hsic-reset {
};
};
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
+};
+
&sd1_bus4 {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index e3dbe41..bd2d883 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -330,7 +330,7 @@ mali: gpu@11800000 {
power-domains = <&pd_g3d>;
status = "disabled";
- gpu_opp_table: gpu-opp-table {
+ gpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-100000000 {
@@ -473,6 +473,12 @@ i2c_9: i2c@121d0000 {
clocks = <&clock CLK_SATA_PHYI2C>;
clock-names = "i2c";
status = "disabled";
+
+ sata_phy_i2c: sata-phy-i2c@38 {
+ compatible = "samsung,exynos-sataphy-i2c";
+ reg = <0x38>;
+ status = "disabled";
+ };
};
spi_0: spi@12d20000 {
@@ -723,7 +729,7 @@ mdma1: mdma@11c10000 {
#dma-requests = <1>;
};
- gsc_0: gsc@13e00000 {
+ gsc_0: gsc@13e00000 {
compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -733,7 +739,7 @@ gsc_0: gsc@13e00000 {
iommus = <&sysmmu_gsc0>;
};
- gsc_1: gsc@13e10000 {
+ gsc_1: gsc@13e10000 {
compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -743,7 +749,7 @@ gsc_1: gsc@13e10000 {
iommus = <&sysmmu_gsc1>;
};
- gsc_2: gsc@13e20000 {
+ gsc_2: gsc@13e20000 {
compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
reg = <0x13e20000 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
@@ -753,7 +759,7 @@ gsc_2: gsc@13e20000 {
iommus = <&sysmmu_gsc2>;
};
- gsc_3: gsc@13e30000 {
+ gsc_3: gsc@13e30000 {
compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
reg = <0x13e30000 0x1000>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
@@ -1085,26 +1091,6 @@ sysmmu_tv: sysmmu@14650000 {
};
};
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&tmu 0>;
-
- cooling-maps {
- map0 {
- /* Corresponds to 800MHz at freq_table */
- cooling-device = <&cpu0 9 9>, <&cpu1 9 9>;
- };
- map1 {
- /* Corresponds to 200MHz at freq_table */
- cooling-device = <&cpu0 15 15>,
- <&cpu1 15 15>;
- };
- };
- };
- };
-
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -1120,6 +1106,24 @@ timer {
};
};
+&cpu_thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tmu 0>;
+
+ cooling-maps {
+ map0 {
+ /* Corresponds to 800MHz at freq_table */
+ cooling-device = <&cpu0 9 9>, <&cpu1 9 9>;
+ };
+ map1 {
+ /* Corresponds to 200MHz at freq_table */
+ cooling-device = <&cpu0 15 15>,
+ <&cpu1 15 15>;
+ };
+ };
+};
+
&dp {
power-domains = <&pd_disp1>;
clocks = <&clock CLK_DP>;
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index 154df70..973448c 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -162,10 +162,8 @@ clock_disp: clock-controller@14550000 {
};
gic: interrupt-controller@10481000 {
- compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
#interrupt-cells = <3>;
- #address-cells = <0>;
- #size-cells = <0>;
interrupt-controller;
reg = <0x10481000 0x1000>,
<0x10482000 0x2000>,
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 4f9297a..75b4150 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -109,10 +109,10 @@ &clock_audss {
assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
<&clock_audss EXYNOS_MOUT_AUDSS>;
- assigned-clock-rates = <0>,
- <0>,
- <96000000>,
- <19200000>;
+ assigned-clock-rates = <0>,
+ <0>,
+ <96000000>,
+ <19200000>;
};
&cpu0_thermal {
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index 5282b5d..2a3ade7 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -29,6 +29,13 @@ fin_pll: xxti {
#clock-cells = <0>;
};
+ pmic_ap_clk: pmic-ap-clk {
+ /* Workaround for missing PMIC and its clock */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
firmware@2037000 {
compatible = "samsung,secure-firmware";
reg = <0x02037000 0x1000>;
@@ -79,6 +86,11 @@ srom_ebi: srom-ebi {
};
};
+&rtc {
+ clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+ clock-names = "rtc", "rtc_src";
+};
+
&sromc {
pinctrl-names = "default";
pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index abe75b9..60a8768 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -238,16 +238,16 @@ cpu0_thermal: cpu0-thermal {
#include "exynos5420-trip-points.dtsi"
};
cpu1_thermal: cpu1-thermal {
- thermal-sensors = <&tmu_cpu1>;
- #include "exynos5420-trip-points.dtsi"
+ thermal-sensors = <&tmu_cpu1>;
+ #include "exynos5420-trip-points.dtsi"
};
cpu2_thermal: cpu2-thermal {
- thermal-sensors = <&tmu_cpu2>;
- #include "exynos5420-trip-points.dtsi"
+ thermal-sensors = <&tmu_cpu2>;
+ #include "exynos5420-trip-points.dtsi"
};
cpu3_thermal: cpu3-thermal {
- thermal-sensors = <&tmu_cpu3>;
- #include "exynos5420-trip-points.dtsi"
+ thermal-sensors = <&tmu_cpu3>;
+ #include "exynos5420-trip-points.dtsi"
};
};
};
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 83fa800..4e49d8095b 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -9,6 +9,7 @@
/dts-v1/;
#include "exynos5420.dtsi"
#include "exynos5420-cpus.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
#include <dt-bindings/gpio/gpio.h>
/ {
@@ -401,6 +402,8 @@ usb301_vbus_en: usb301-vbus-en {
&rtc {
status = "okay";
+ clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
};
&usbdrd_phy0 {
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index c76460b..83580f0 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -1199,20 +1199,20 @@ cpu0_thermal: cpu0-thermal {
#include "exynos5420-trip-points.dtsi"
};
cpu1_thermal: cpu1-thermal {
- thermal-sensors = <&tmu_cpu1>;
- #include "exynos5420-trip-points.dtsi"
+ thermal-sensors = <&tmu_cpu1>;
+ #include "exynos5420-trip-points.dtsi"
};
cpu2_thermal: cpu2-thermal {
- thermal-sensors = <&tmu_cpu2>;
- #include "exynos5420-trip-points.dtsi"
+ thermal-sensors = <&tmu_cpu2>;
+ #include "exynos5420-trip-points.dtsi"
};
cpu3_thermal: cpu3-thermal {
- thermal-sensors = <&tmu_cpu3>;
- #include "exynos5420-trip-points.dtsi"
+ thermal-sensors = <&tmu_cpu3>;
+ #include "exynos5420-trip-points.dtsi"
};
gpu_thermal: gpu-thermal {
- thermal-sensors = <&tmu_gpu>;
- #include "exynos5420-trip-points.dtsi"
+ thermal-sensors = <&tmu_gpu>;
+ #include "exynos5420-trip-points.dtsi"
};
};
};
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index afe0905..b1cf941 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -333,8 +333,8 @@ samsung_K3QF2F20DB: lpddr3 {
compatible = "samsung,K3QF2F20DB", "jedec,lpddr3";
density = <16384>;
io-width = <32>;
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
tRFC-min-tck = <17>;
tRRD-min-tck = <2>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
index c3c2d85..b5ec4f4 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
@@ -29,30 +29,6 @@ sound: sound {
"HiFi Playback", "Mixer DAI TX",
"Mixer DAI RX", "HiFi Capture";
- assigned-clocks = <&clock CLK_MOUT_EPLL>,
- <&clock CLK_MOUT_MAU_EPLL>,
- <&clock CLK_MOUT_USER_MAU_EPLL>,
- <&clock_audss EXYNOS_MOUT_AUDSS>,
- <&clock_audss EXYNOS_MOUT_I2S>,
- <&clock_audss EXYNOS_DOUT_SRP>,
- <&clock_audss EXYNOS_DOUT_AUD_BUS>,
- <&clock_audss EXYNOS_DOUT_I2S>;
-
- assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
- <&clock CLK_MOUT_EPLL>,
- <&clock CLK_MOUT_MAU_EPLL>,
- <&clock CLK_MAU_EPLL>,
- <&clock_audss EXYNOS_MOUT_AUDSS>;
-
- assigned-clock-rates = <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <196608001>,
- <(196608002 / 2)>,
- <196608000>;
-
cpu {
sound-dai = <&i2s0 0>, <&i2s0 1>;
};
@@ -62,13 +38,6 @@ codec {
};
};
-&clock_audss {
- assigned-clocks = <&clock_audss EXYNOS_DOUT_SRP>,
- <&clock CLK_FOUT_EPLL>;
- assigned-clock-rates = <(196608000 / 256)>,
- <196608000>;
-};
-
&hsi2c_5 {
status = "okay";
max98090: max98090@10 {
@@ -84,6 +53,31 @@ max98090: max98090@10 {
&i2s0 {
status = "okay";
- assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
- assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>;
+ assigned-clocks = <&clock CLK_MOUT_EPLL>,
+ <&clock CLK_MOUT_MAU_EPLL>,
+ <&clock CLK_MOUT_USER_MAU_EPLL>,
+ <&clock_audss EXYNOS_MOUT_AUDSS>,
+ <&clock_audss EXYNOS_MOUT_I2S>,
+ <&i2s0 CLK_I2S_RCLK_SRC>,
+ <&clock_audss EXYNOS_DOUT_SRP>,
+ <&clock_audss EXYNOS_DOUT_AUD_BUS>,
+ <&clock_audss EXYNOS_DOUT_I2S>;
+
+ assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+ <&clock CLK_MOUT_EPLL>,
+ <&clock CLK_MOUT_MAU_EPLL>,
+ <&clock CLK_MAU_EPLL>,
+ <&clock_audss EXYNOS_MOUT_AUDSS>,
+ <&clock_audss EXYNOS_SCLK_I2S>;
+
+ assigned-clock-rates = <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <196608001>,
+ <(196608002 / 2)>,
+ <196608000>;
+
};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
index 892d389..ddd55d3 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -35,30 +35,6 @@ sound: sound {
samsung,audio-routing = "I2S Playback", "Mixer DAI TX";
- assigned-clocks = <&clock CLK_MOUT_EPLL>,
- <&clock CLK_MOUT_MAU_EPLL>,
- <&clock CLK_MOUT_USER_MAU_EPLL>,
- <&clock_audss EXYNOS_MOUT_AUDSS>,
- <&clock_audss EXYNOS_MOUT_I2S>,
- <&clock_audss EXYNOS_DOUT_SRP>,
- <&clock_audss EXYNOS_DOUT_AUD_BUS>,
- <&clock_audss EXYNOS_DOUT_I2S>;
-
- assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
- <&clock CLK_MOUT_EPLL>,
- <&clock CLK_MOUT_MAU_EPLL>,
- <&clock CLK_MAU_EPLL>,
- <&clock_audss EXYNOS_MOUT_AUDSS>;
-
- assigned-clock-rates = <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <196608001>,
- <(196608002 / 2)>,
- <196608000>;
-
cpu {
sound-dai = <&i2s0 0>, <&i2s0 1>;
};
@@ -69,17 +45,35 @@ codec {
};
};
-&clock_audss {
- assigned-clocks = <&clock_audss EXYNOS_DOUT_SRP>,
- <&clock CLK_FOUT_EPLL>;
- assigned-clock-rates = <(196608000 / 256)>,
- <196608000>;
-};
-
&i2s0 {
status = "okay";
- assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
- assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>;
+
+ assigned-clocks = <&clock CLK_MOUT_EPLL>,
+ <&clock CLK_MOUT_MAU_EPLL>,
+ <&clock CLK_MOUT_USER_MAU_EPLL>,
+ <&clock_audss EXYNOS_MOUT_AUDSS>,
+ <&clock_audss EXYNOS_MOUT_I2S>,
+ <&i2s0 CLK_I2S_RCLK_SRC>,
+ <&clock_audss EXYNOS_DOUT_SRP>,
+ <&clock_audss EXYNOS_DOUT_AUD_BUS>,
+ <&clock_audss EXYNOS_DOUT_I2S>;
+
+ assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+ <&clock CLK_MOUT_EPLL>,
+ <&clock CLK_MOUT_MAU_EPLL>,
+ <&clock CLK_MAU_EPLL>,
+ <&clock_audss EXYNOS_MOUT_AUDSS>,
+ <&clock_audss EXYNOS_SCLK_I2S>;
+
+ assigned-clock-rates = <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <196608001>,
+ <(196608002 / 2)>,
+ <196608000>;
};
&pwm {
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
index f0af1bf..f683440 100644
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -89,7 +89,7 @@ gic: interrupt-controller@1000 {
};
sysctrl: system-controller@802000 {
- compatible = "hisilicon,sysctrl";
+ compatible = "hisilicon,sysctrl", "syscon";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x802000 0x1000>;
@@ -111,8 +111,10 @@ dual_timer0: dual_timer@800000 {
reg = <0x800000 0x1000>;
/* timer00 & timer01 */
interrupts = <0 0 4>, <0 1 4>;
- clocks = <&clock HI3620_TIMER0_MUX>, <&clock HI3620_TIMER1_MUX>;
- clock-names = "apb_pclk";
+ clocks = <&clock HI3620_TIMER0_MUX>,
+ <&clock HI3620_TIMER1_MUX>,
+ <&clock HI3620_TIMER0_MUX>;
+ clock-names = "timer0clk", "timer1clk", "apb_pclk";
status = "disabled";
};
@@ -121,8 +123,10 @@ dual_timer1: dual_timer@801000 {
reg = <0x801000 0x1000>;
/* timer10 & timer11 */
interrupts = <0 2 4>, <0 3 4>;
- clocks = <&clock HI3620_TIMER2_MUX>, <&clock HI3620_TIMER3_MUX>;
- clock-names = "apb_pclk";
+ clocks = <&clock HI3620_TIMER2_MUX>,
+ <&clock HI3620_TIMER3_MUX>,
+ <&clock HI3620_TIMER2_MUX>;
+ clock-names = "timer0clk", "timer1clk", "apb_pclk";
status = "disabled";
};
@@ -131,8 +135,10 @@ dual_timer2: dual_timer@a01000 {
reg = <0xa01000 0x1000>;
/* timer20 & timer21 */
interrupts = <0 4 4>, <0 5 4>;
- clocks = <&clock HI3620_TIMER4_MUX>, <&clock HI3620_TIMER5_MUX>;
- clock-names = "apb_pclk";
+ clocks = <&clock HI3620_TIMER4_MUX>,
+ <&clock HI3620_TIMER5_MUX>,
+ <&clock HI3620_TIMER4_MUX>;
+ clock-names = "timer0lck", "timer1clk", "apb_pclk";
status = "disabled";
};
@@ -141,8 +147,10 @@ dual_timer3: dual_timer@a02000 {
reg = <0xa02000 0x1000>;
/* timer30 & timer31 */
interrupts = <0 6 4>, <0 7 4>;
- clocks = <&clock HI3620_TIMER6_MUX>, <&clock HI3620_TIMER7_MUX>;
- clock-names = "apb_pclk";
+ clocks = <&clock HI3620_TIMER6_MUX>,
+ <&clock HI3620_TIMER7_MUX>,
+ <&clock HI3620_TIMER6_MUX>;
+ clock-names = "timer0clk", "timer1clk", "apb_pclk";
status = "disabled";
};
@@ -151,8 +159,10 @@ dual_timer4: dual_timer@a03000 {
reg = <0xa03000 0x1000>;
/* timer40 & timer41 */
interrupts = <0 96 4>, <0 97 4>;
- clocks = <&clock HI3620_TIMER8_MUX>, <&clock HI3620_TIMER9_MUX>;
- clock-names = "apb_pclk";
+ clocks = <&clock HI3620_TIMER8_MUX>,
+ <&clock HI3620_TIMER9_MUX>,
+ <&clock HI3620_TIMER8_MUX>;
+ clock-names = "timer0clk", "timer1clk", "apb_pclk";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
index 4263a93..555bc6b 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -213,7 +213,7 @@ gic: interrupt-controller@c01000 {
};
sysctrl: sysctrl {
- compatible = "hisilicon,sysctrl";
+ compatible = "hisilicon,sysctrl", "syscon";
reg = <0x3e00000 0x00100000>;
};
@@ -226,8 +226,8 @@ dual_timer0: dual_timer@3000000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x3000000 0x1000>;
interrupts = <0 224 4>;
- clocks = <&clk_50m>, <&clk_50m>;
- clock-names = "apb_pclk";
+ clocks = <&clk_50m>, <&clk_50m>, <&clk_50m>;
+ clock-names = "timer0clk", "timer1clk", "apb_pclk";
};
arm-pmu {
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index 3ee7967..e2dbf1d 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -370,8 +370,9 @@ wdt0: watchdog@a2c000 {
arm,primecell-periphid = <0x00141805>;
reg = <0xa2c000 0x1000>;
interrupts = <0 29 4>;
- clocks = <&clock HIX5HD2_WDG0_RST>;
- clock-names = "apb_pclk";
+ clocks = <&clock HIX5HD2_WDG0_RST>,
+ <&clock HIX5HD2_WDG0_RST>;
+ clock-names = "wdog_clk", "apb_pclk";
};
};
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 0b2701c..8cbaf1c81 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -53,7 +53,7 @@ panel_in: endpoint {
apb@80000000 {
apbh@80000000 {
- gpmi-nand@8000c000 {
+ nand-controller@8000c000 {
pinctrl-names = "default";
pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 18289f6..7f4c602 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -76,7 +76,7 @@ ecc@80008000 {
status = "disabled";
};
- gpmi-nand@8000c000 {
+ nand-controller@8000c000 {
compatible = "fsl,imx23-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
index 111bfdc..f984b70 100644
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -87,6 +87,7 @@
#define MX25_PAD_EB1__EB1 0x044 0x25c 0x000 0x00 0x000
#define MX25_PAD_EB1__AUD4_RXD 0x044 0x25c 0x460 0x04 0x000
#define MX25_PAD_EB1__GPIO_2_13 0x044 0x25c 0x000 0x05 0x000
+#define MX25_PAD_EB1__CSPI3_SS1 0x044 0x25c 0x4c0 0x06 0x000
#define MX25_PAD_OE__OE 0x048 0x260 0x000 0x00 0x000
#define MX25_PAD_OE__AUD4_TXC 0x048 0x260 0x000 0x04 0x000
@@ -112,6 +113,7 @@
#define MX25_PAD_CS5__CSPI3_MISO 0x058 0x268 0x4b4 0x06 0x000
#define MX25_PAD_NF_CE0__NF_CE0 0x05c 0x26c 0x000 0x00 0x000
+#define MX25_PAD_NF_CE0__CSPI1_SS3 0x05c 0x26c 0x490 0x01 0x000
#define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x05 0x000
#define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x00 0x000
@@ -122,6 +124,7 @@
#define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x00 0x000
#define MX25_PAD_LBA__UART5_RXD 0x064 0x274 0x578 0x03 0x000
#define MX25_PAD_LBA__GPIO_3_24 0x064 0x274 0x000 0x05 0x000
+#define MX25_PAD_LBA__CSPI3_RDY 0x064 0x274 0x4b0 0x06 0x000
#define MX25_PAD_BCLK__BCLK 0x068 0x000 0x000 0x00 0x000
#define MX25_PAD_BCLK__GPIO_4_4 0x068 0x000 0x000 0x05 0x000
@@ -285,7 +288,8 @@
#define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x05 0x000
#define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x00 0x000
-#define MX25_PAD_CONTRAST__CC4 0x118 0x310 0x000 0x01 0x000
+#define MX25_PAD_CONTRAST__GPT4_CAPIN1 0x118 0x310 0x000 0x01 0x000
+#define MX25_PAD_CONTRAST__CSPI2_SS1 0x118 0x310 0x4a8 0x02 0x000
#define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x04 0x000
#define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x05 0x001
#define MX25_PAD_CONTRAST__USBH2_PWR 0x118 0x310 0x000 0x06 0x000
@@ -298,7 +302,7 @@
#define MX25_PAD_CSI_D2__UART5_RXD 0x120 0x318 0x578 0x01 0x001
#define MX25_PAD_CSI_D2__SIM1_CLK0 0x120 0x318 0x000 0x04 0x000
#define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x05 0x000
-#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x07 0x000
+#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x4b8 0x07 0x001
#define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x00 0x000
#define MX25_PAD_CSI_D3__UART5_TXD 0x124 0x31c 0x000 0x01 0x000
@@ -310,23 +314,25 @@
#define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x01 0x001
#define MX25_PAD_CSI_D4__SIM1_VEN0 0x128 0x320 0x000 0x04 0x000
#define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x05 0x000
-#define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x07 0x000
+#define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x4ac 0x07 0x001
#define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x00 0x000
#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x01 0x000
#define MX25_PAD_CSI_D5__SIM1_TX0 0x12c 0x324 0x000 0x04 0x000
#define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x05 0x000
-#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x07 0x000
+#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x4b0 0x07 0x001
#define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x00 0x000
/* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */
#define MX25_PAD_CSI_D6__ESDHC2_CMD 0x130 0x328 0x4e0 0x12 0x001
#define MX25_PAD_CSI_D6__SIM1_PD0 0x130 0x328 0x000 0x04 0x000
#define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x05 0x000
+#define MX25_PAD_CSI_D6__CSPI3_SS0 0x130 0x328 0x4bc 0x07 0x001
#define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x00 0x000
#define MX25_PAD_CSI_D7__ESDHC2_CLK 0x134 0x32C 0x4dc 0x02 0x001
#define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x05 0x000
+#define MX25_PAD_CSI_D7__CSPI3_SS1 0x134 0x32c 0x4c0 0x07 0x001
#define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x00 0x000
#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x02 0x000
@@ -398,7 +404,7 @@
#define MX25_PAD_UART1_RTS__UART1_RTS 0x178 0x370 0x000 0x00 0x000
#define MX25_PAD_UART1_RTS__CSI_D0 0x178 0x370 0x488 0x01 0x001
-#define MX25_PAD_UART1_RTS__CC3 0x178 0x370 0x000 0x02 0x000
+#define MX25_PAD_UART1_RTS__GPT3_CAPIN1 0x178 0x370 0x000 0x02 0x000
#define MX25_PAD_UART1_RTS__UART2_DCD 0x178 0x370 0x000 0x03 0x000
#define MX25_PAD_UART1_RTS__GPIO_4_24 0x178 0x370 0x000 0x05 0x000
@@ -415,12 +421,14 @@
#define MX25_PAD_UART2_RTS__UART2_RTS 0x188 0x380 0x000 0x00 0x000
#define MX25_PAD_UART2_RTS__FEC_COL 0x188 0x380 0x504 0x02 0x002
-#define MX25_PAD_UART2_RTS__CC1 0x188 0x380 0x000 0x03 0x000
+#define MX25_PAD_UART2_RTS__GPT1_CAPIN1 0x188 0x380 0x000 0x03 0x000
#define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x05 0x000
+#define MX25_PAD_UART2_RTS__CSPI2_SS3 0x188 0x380 0x000 0x06 0x000
#define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x00 0x000
#define MX25_PAD_UART2_CTS__FEC_RX_ERR 0x18c 0x384 0x518 0x02 0x002
#define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x05 0x000
+#define MX25_PAD_UART2_CTS__CSPI3_SS3 0x18c 0x384 0x4c8 0x06 0x001
/*
* Removing the SION bit from MX25_PAD_*__ESDHCn_CMD breaks detecting an SD
@@ -446,14 +454,17 @@
#define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x05 0x000
#define MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x19c 0x394 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA1__CSPI2_RDY 0x19c 0x394 0x498 0x01 0x001
#define MX25_PAD_SD1_DATA1__AUD7_RXD 0x19c 0x394 0x478 0x03 0x000
#define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x05 0x000
#define MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x1a0 0x398 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA2__CSPI2_SS0 0x1a0 0x398 0x4a4 0x01 0x001
#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x02 0x002
#define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x05 0x000
#define MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x1a4 0x39c 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA3__CSPI2_SS1 0x1a4 0x39c 0x4a8 0x01 0x001
#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x02 0x002
#define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x05 0x000
@@ -564,11 +575,15 @@
#define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x01 0x000
#define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x02 0x001
#define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x03 0x001
+#define MX25_PAD_GPIO_C__GPT2_CAPIN1 0x1fc 0x3f8 0x000 0x04 0x000
+#define MX25_PAD_GPIO_C__CSPI1_SS2 0x1fc 0x3f8 0x000 0x05 0x000
#define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x06 0x000
+#define MX25_PAD_GPIO_C__CSPI2_SS2 0x1fc 0x3f8 0x000 0x07 0x000
#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x00 0x000
#define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x02 0x001
#define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x06 0x001
+#define MX25_PAD_GPIO_D__CSPI3_SS2 0x200 0x3fc 0x4c4 0x07 0x001
#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x00 0x000
#define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x01 0x002
@@ -593,6 +608,7 @@
#define MX25_PAD_VSTBY_REQ__UART4_RTS 0x214 0x408 0x56c 0x06 0x002
#define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x00 0x000
+#define MX25_PAD_VSTBY_ACK__CSPI1_SS3 0x218 0x40c 0x490 0x02 0x001
#define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x05 0x000
#define MX25_PAD_POWER_FAIL__POWER_FAIL 0x21c 0x410 0x000 0x00 0x000
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
index 52c9524..303f920 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
@@ -18,8 +18,8 @@ memory@a0000000 {
};
&cspi1 {
- cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
- <&gpio4 27 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>,
+ <&gpio4 27 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index bf883e4..344e777 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -65,7 +65,7 @@ usbphy2: usbphy@2 {
&cspi1 {
pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>;
- cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
+ cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>,
<&gpio4 27 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index fc0b318..7bc1327 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -558,7 +558,7 @@ fec: ethernet@1002b000 {
};
};
- nfc: nand@d8000000 {
+ nfc: nand-controller@d8000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,imx27-nand";
diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts
index 3ed2b32..14a92fe 100644
--- a/arch/arm/boot/dts/imx28-apf28.dts
+++ b/arch/arm/boot/dts/imx28-apf28.dts
@@ -17,7 +17,7 @@ memory@40000000 {
apb@80000000 {
apbh@80000000 {
- gpmi-nand@8000c000 {
+ nand-controller@8000c000 {
pinctrl-names = "default";
pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index c5acc19..b86be32 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -13,7 +13,7 @@ memory@40000000 {
apb@80000000 {
apbh@80000000 {
- gpmi-nand@8000c000 {
+ nand-controller@8000c000 {
pinctrl-names = "default";
pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 96c1d10..7e2b0f1 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -97,7 +97,7 @@ panel_in: endpoint {
apb@80000000 {
apbh@80000000 {
- gpmi-nand@8000c000 {
+ nand-controller@8000c000 {
pinctrl-names = "default";
pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
&gpmi_pins_evk>;
diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi
index 0bac72d5..2bdb4c0 100644
--- a/arch/arm/boot/dts/imx28-m28.dtsi
+++ b/arch/arm/boot/dts/imx28-m28.dtsi
@@ -16,7 +16,7 @@ memory@40000000 {
apb@80000000 {
apbh@80000000 {
- gpmi-nand@8000c000 {
+ nand-controller@8000c000 {
#address-cells = <1>;
#size-cells = <1>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
index 91bd6de..865ac3d 100644
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -17,7 +17,7 @@ memory@40000000 {
apb@80000000 {
apbh@80000000 {
- gpmi-nand@8000c000 {
+ nand-controller@8000c000 {
#address-cells = <1>;
#size-cells = <1>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index a2b799c..94dfbf5 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -100,7 +100,7 @@ perfmon: perfmon@80006000 {
status = "disabled";
};
- gpmi: gpmi-nand@8000c000 {
+ gpmi: nand-controller@8000c000 {
compatible = "fsl,imx28-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts
index a25da41..878e89c 100644
--- a/arch/arm/boot/dts/imx50-evk.dts
+++ b/arch/arm/boot/dts/imx50-evk.dts
@@ -20,7 +20,7 @@ memory@70000000 {
&cspi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cspi>;
- cs-gpios = <&gpio4 11 0>, <&gpio4 13 0>;
+ cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>, <&gpio4 13 GPIO_ACTIVE_LOW>;
status = "okay";
flash: m25p32@1 {
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index 563c1aa..c66f274 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -74,8 +74,8 @@ user {
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
- <&gpio4 25 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>,
+ <&gpio4 25 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
index 719ed5c..f98691a 100644
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -104,7 +104,7 @@ &clks {
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
- cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, <&gpio2 27 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio2 27 GPIO_ACTIVE_LOW>;
status = "okay";
spidev@0 {
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index ec9fb89..9be44e8 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -58,7 +58,7 @@ &uart3 {
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
+ cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>;
status = "okay";
zigbee: mc1323@0 {
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index 9a6cb13..7e7f9f3 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -50,8 +50,8 @@ &uart3 {
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>,
- <&gpio3 24 0>, <&gpio3 25 0>;
+ cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>,
+ <&gpio3 24 GPIO_ACTIVE_LOW>, <&gpio3 25 GPIO_ACTIVE_LOW>;
status = "disabled";
};
@@ -251,8 +251,8 @@ &i2c3 {
&cspi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cspi>;
- cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>,
- <&gpio1 21 0>;
+ cs-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>, <&gpio1 19 GPIO_ACTIVE_LOW>,
+ <&gpio1 21 GPIO_ACTIVE_LOW>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
index 289feab..24859d0 100644
--- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
+++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
@@ -119,7 +119,8 @@ MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>;
+ cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>,
+ <&gpio2 16 GPIO_ACTIVE_LOW>, <&gpio2 17 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
index 9e027b9..665d637 100644
--- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
+++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
@@ -212,6 +212,7 @@ &audmux {
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
status = "disabled";
};
@@ -383,7 +384,7 @@ pinctrl_ecspi1: ecspi1grp {
MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
- MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0 0x100b1
+ MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
>;
};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
index 809ca56..5c7e853 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
@@ -61,7 +61,7 @@ display0_in: endpoint {
};
&ecspi2 {
- cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
index 9eb2b73..b4a9523e 100644
--- a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
+++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
@@ -67,7 +67,7 @@ &can2 {
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
- cs-gpios = <&gpio5 12 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
status = "okay";
flash@0 {
@@ -80,7 +80,7 @@ flash@0 {
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
status = "okay";
tpm@0 {
diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/imx6dl-prtrvt.dts
index fa88245..5ac8444 100644
--- a/arch/arm/boot/dts/imx6dl-prtrvt.dts
+++ b/arch/arm/boot/dts/imx6dl-prtrvt.dts
@@ -37,7 +37,7 @@ &can1 {
};
&ecspi1 {
- cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
@@ -52,7 +52,7 @@ flash@0 {
};
&ecspi3 {
- cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
index 306b4f7..ae6da24 100644
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -219,7 +219,7 @@ &clks {
};
&ecspi2 {
- cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6dl-tqma6a.dtsi b/arch/arm/boot/dts/imx6dl-tqma6a.dtsi
new file mode 100644
index 0000000..e891ef9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tqma6a.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-tqma6a.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x20000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-tqma6b.dtsi b/arch/arm/boot/dts/imx6dl-tqma6b.dtsi
new file mode 100644
index 0000000..38cd850
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tqma6b.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-tqma6b.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x20000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index c4a235d..7d2c725 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -8,6 +8,11 @@
#include <dt-bindings/pwm/pwm.h>
/ {
+ aliases: aliases {
+ ethernet1 = ð1;
+ ethernet2 = ð2;
+ };
+
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
@@ -135,13 +140,13 @@ fixed-link {
};
};
- port@2 {
+ eth2: port@2 {
reg = <2>;
label = "eth2";
phy-handle = <&phy_port2>;
};
- port@3 {
+ eth1: port@3 {
reg = <3>;
label = "eth1";
phy-handle = <&phy_port3>;
@@ -258,29 +263,35 @@ leds: led-controller@30 {
reg = <0x30>;
clock-mode = /bits/ 8 <1>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
- chan0 {
+ chan@0 {
chan-name = "R";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
+ reg = <0>;
};
- chan1 {
+ chan@1 {
chan-name = "G";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
+ reg = <1>;
};
- chan2 {
+ chan@2 {
chan-name = "B";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
+ reg = <2>;
};
- chan3 {
+ chan@3 {
chan-name = "W";
led-cur = /bits/ 8 <0x0>;
max-cur = /bits/ 8 <0x0>;
+ reg = <3>;
};
};
@@ -311,7 +322,20 @@ &i2c3 {
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- oled: oled@3d {
+ oled_1309: oled@3c {
+ compatible = "solomon,ssd1309fb-i2c";
+ reg = <0x3c>;
+ solomon,height = <64>;
+ solomon,width = <128>;
+ solomon,page-offset = <0>;
+ solomon,segment-no-remap;
+ solomon,prechargep2 = <15>;
+ reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
+ vbat-supply = <&sw2_reg>;
+ status = "disabled";
+ };
+
+ oled_1305: oled@3d {
compatible = "solomon,ssd1305fb-i2c";
reg = <0x3d>;
solomon,height = <64>;
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts
index 6010d3d..a19609c 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts
+++ b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts
@@ -29,7 +29,11 @@ &leds {
status = "okay";
};
-&oled {
+&oled_1305 {
+ status = "okay";
+};
+
+&oled_1309 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-orion.dts b/arch/arm/boot/dts/imx6dl-yapp4-orion.dts
new file mode 100644
index 0000000..884b236
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-orion.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2020 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+ model = "Y Soft IOTA Orion i.MX6DualLite board";
+ compatible = "ysoft,imx6dl-yapp4-orion", "fsl,imx6dl";
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0xf0000000>;
+ };
+};
+
+&gpio_oled {
+ status = "okay";
+};
+
+&leds {
+ status = "okay";
+};
+
+&oled_1305 {
+ status = "okay";
+};
+
+&oled_1309 {
+ status = "okay";
+};
+
+®_usb_h1_vbus {
+ status = "okay";
+};
+
+&touchkeys {
+ status = "okay";
+};
+
+&uart2 {
+ status = "disabled";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbphy2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
index a1173bf..f6ae24e 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
+++ b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
@@ -17,6 +17,10 @@ memory@10000000 {
};
};
+&aliases {
+ /delete-property/ ethernet1;
+};
+
&backlight {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 77b65a4..fdd81fd 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -88,10 +88,6 @@ ocram: sram@900000 {
};
aips1: bus@2000000 {
- iomuxc: pinctrl@20e0000 {
- compatible = "fsl,imx6dl-iomuxc";
- };
-
pxp: pxp@20f0000 {
reg = <0x020f0000 0x4000>;
interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -298,6 +294,10 @@ &hdmi {
compatible = "fsl,imx6dl-hdmi";
};
+&iomuxc {
+ compatible = "fsl,imx6dl-iomuxc";
+};
+
&ipu1_csi1 {
ipu1_csi1_from_ipu1_csi1_mux: endpoint {
remote-endpoint = <&ipu1_csi1_mux_to_ipu1_csi1>;
diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts
index fb09801..604f242 100644
--- a/arch/arm/boot/dts/imx6q-b450v3.dts
+++ b/arch/arm/boot/dts/imx6q-b450v3.dts
@@ -84,19 +84,19 @@ lvds0_out: endpoint {
};
&pca9539 {
- P04 {
+ P04-hog {
gpio-hog;
gpios = <4 0>;
output-low;
line-name = "PCA9539-P04";
};
- P07 {
- gpio-hog;
- gpios = <7 0>;
- output-low;
- line-name = "PCA9539-P07";
- };
+ P07-hog {
+ gpio-hog;
+ gpios = <7 0>;
+ output-low;
+ line-name = "PCA9539-P07";
+ };
};
&pci_root {
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts
index 8f762d9..56d2aeb 100644
--- a/arch/arm/boot/dts/imx6q-b650v3.dts
+++ b/arch/arm/boot/dts/imx6q-b650v3.dts
@@ -84,12 +84,12 @@ lvds0_out: endpoint {
};
&pca9539 {
- P07 {
- gpio-hog;
- gpios = <7 0>;
- output-low;
- line-name = "PCA9539-P07";
- };
+ P07-hog {
+ gpio-hog;
+ gpios = <7 0>;
+ output-low;
+ line-name = "PCA9539-P07";
+ };
};
&usbphy1 {
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
index 1ea64ec..3d6b757 100644
--- a/arch/arm/boot/dts/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -199,14 +199,14 @@ stdp4028_out: endpoint {
};
&pca9539 {
- P10 {
+ P10-hog {
gpio-hog;
gpios = <8 0>;
output-low;
line-name = "PCA9539-P10";
};
- P11 {
+ P11-hog {
gpio-hog;
gpios = <9 0>;
output-low;
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index fc81f2f..e4578ed 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -134,7 +134,7 @@ &audmux {
};
&ecspi1 {
- cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index 1938b04..2a98cc6 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -102,10 +102,15 @@ mdio0: mdio-gpio {
#address-cells = <1>;
#size-cells = <0>;
- switch@0 {
+ switch: switch@0 {
compatible = "marvell,mv88e6085"; /* 88e6240*/
reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
switch_ports: ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -117,22 +122,32 @@ mdio {
switchphy0: switchphy@0 {
reg = <0>;
+ interrupt-parent = <&switch>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy1: switchphy@1 {
reg = <1>;
+ interrupt-parent = <&switch>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy2: switchphy@2 {
reg = <2>;
+ interrupt-parent = <&switch>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy3: switchphy@3 {
reg = <3>;
+ interrupt-parent = <&switch>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy4: switchphy@4 {
reg = <4>;
+ interrupt-parent = <&switch>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
@@ -140,7 +155,7 @@ switchphy4: switchphy@4 {
};
&ecspi5 {
- cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi5>;
status = "okay";
@@ -233,42 +248,42 @@ pca9539: pca9539@74 {
interrupt-parent = <&gpio2>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
- P12 {
+ P12-hog {
gpio-hog;
gpios = <10 0>;
output-low;
line-name = "PCA9539-P12";
};
- P13 {
+ P13-hog {
gpio-hog;
gpios = <11 0>;
output-low;
line-name = "PCA9539-P13";
};
- P14 {
+ P14-hog {
gpio-hog;
gpios = <12 0>;
output-low;
line-name = "PCA9539-P14";
};
- P15 {
+ P15-hog {
gpio-hog;
gpios = <13 0>;
output-low;
line-name = "PCA9539-P15";
};
- P16 {
+ P16-hog {
gpio-hog;
gpios = <14 0>;
output-low;
line-name = "PCA9539-P16";
};
- P17 {
+ P17-hog {
gpio-hog;
gpios = <15 0>;
output-low;
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
index cab9e92..bfb530f 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -255,7 +255,7 @@ &cpu3 {
};
&ecspi1 {
- cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
index 87f0aa8..236fc20 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
@@ -59,7 +59,7 @@ &can2 {
};
&ecspi1 {
- cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio4 11 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio4 11 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index f9df207b..fa2307d 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -99,7 +99,7 @@ &can1 {
&ecspi5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi5>;
- cs-gpios = <&gpio1 12 0>;
+ cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
status = "okay";
flash: m25p80@0 {
diff --git a/arch/arm/boot/dts/imx6q-dms-ba16.dts b/arch/arm/boot/dts/imx6q-dms-ba16.dts
index 57761f3..48fb47e 100644
--- a/arch/arm/boot/dts/imx6q-dms-ba16.dts
+++ b/arch/arm/boot/dts/imx6q-dms-ba16.dts
@@ -42,7 +42,7 @@ sound {
};
&ecspi5 {
- cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi5>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index b6e2b58..4cde45d 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -132,7 +132,7 @@ &audmux {
};
&ecspi1 {
- cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
index 2618ecc..4d6a0c3 100644
--- a/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
+++ b/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
@@ -14,10 +14,9 @@ / {
/* Quad/Dual SoMs have 3 chip-select signals */
&ecspi4 {
- fsl,spi-num-chipselects = <3>;
- cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>,
- <&gpio3 29 GPIO_ACTIVE_HIGH>,
- <&gpio3 25 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
+ <&gpio3 29 GPIO_ACTIVE_LOW>,
+ <&gpio3 25 GPIO_ACTIVE_LOW>;
};
&pinctrl_ecspi4 {
diff --git a/arch/arm/boot/dts/imx6q-logicpd.dts b/arch/arm/boot/dts/imx6q-logicpd.dts
index 8f94364..46a4dde 100644
--- a/arch/arm/boot/dts/imx6q-logicpd.dts
+++ b/arch/arm/boot/dts/imx6q-logicpd.dts
@@ -9,7 +9,7 @@
/ {
model = "Logic PD i.MX6QD SOM-M3";
- compatible = "fsl,imx6q";
+ compatible = "logicpd,imx6q-logicpd", "fsl,imx6q";
backlight: backlight-lvds {
compatible = "pwm-backlight";
diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts
index de6cbaa..d112b50 100644
--- a/arch/arm/boot/dts/imx6q-prti6q.dts
+++ b/arch/arm/boot/dts/imx6q-prti6q.dts
@@ -158,7 +158,7 @@ &can2 {
};
&ecspi1 {
- cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
@@ -171,7 +171,7 @@ flash@0 {
};
&ecspi2 {
- cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, <&gpio4 25 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio4 25 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
status = "okay";
@@ -195,7 +195,7 @@ adc@1 {
};
&ecspi3 {
- cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-tqma6a.dtsi b/arch/arm/boot/dts/imx6q-tqma6a.dtsi
new file mode 100644
index 0000000..ab4c07c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tqma6a.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6q.dtsi"
+#include "imx6qdl-tqma6a.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x40000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-tqma6b.dtsi b/arch/arm/boot/dts/imx6q-tqma6b.dtsi
new file mode 100644
index 0000000..7224c37
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tqma6b.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ */
+
+#include "imx6q.dtsi"
+#include "imx6qdl-tqma6b.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x40000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
index a57c2e3..6355035 100644
--- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
+++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
@@ -144,8 +144,8 @@ &can1 {
};
&ecspi1 {
- cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>,
- <&gpio4 10 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>,
+ <&gpio4 10 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 78a4d64..5277e39 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -182,10 +182,6 @@ ecspi5: spi@2018000 {
status = "disabled";
};
};
-
- iomuxc: pinctrl@20e0000 {
- compatible = "fsl,imx6q-iomuxc";
- };
};
sata: sata@2200000 {
@@ -427,6 +423,10 @@ hdmi_mux_3: endpoint {
};
};
+&iomuxc {
+ compatible = "fsl,imx6q-iomuxc";
+};
+
&ipu1_csi1 {
ipu1_csi1_from_mipi_vc1: endpoint {
remote-endpoint = <&mipi_vc1_to_ipu1_csi1>;
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index dbdd7db..30fa349 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -127,7 +127,7 @@ &can2 {
/* Apalis SPI1 */
&ecspi1 {
- cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "disabled";
@@ -135,7 +135,7 @@ &ecspi1 {
/* Apalis SPI2 */
&ecspi2 {
- cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
status = "disabled";
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
index d954661..e21f6ac 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -91,7 +91,7 @@ rtc@68 {
};
&ecspi4 {
- cs-gpios = <&gpio3 20 0>;
+ cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi4>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index d38630d..ead7ba2 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -110,23 +110,23 @@ &can2 {
};
&ecspi1 {
- cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH
- &gpio4 10 GPIO_ACTIVE_HIGH
- &gpio4 11 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW
+ &gpio4 10 GPIO_ACTIVE_LOW
+ &gpio4 11 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
};
&ecspi2 {
- cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW &gpio2 27 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
};
&ecspi4 {
- cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio3 29 GPIO_ACTIVE_LOW &gpio5 2 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi4>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 0930194..4e2a309 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -94,7 +94,7 @@ &can2 {
/* Colibri SSP */
&ecspi4 {
- cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi4>;
status = "disabled";
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index ebe7a8b..648f5fc 100644
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -30,7 +30,7 @@ chosen {
};
&ecspi3 {
- cs-gpios = <&gpio4 24 0>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
index 35e230f..7228b89 100644
--- a/arch/arm/boot/dts/imx6qdl-emcon.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
@@ -168,8 +168,8 @@ &can2 {
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
- cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>,
- <&gpio2 27 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>,
+ <&gpio2 27 GPIO_ACTIVE_LOW>;
};
&ecspi4 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 4d01c33..3c04b5a 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -152,7 +153,7 @@ gsc: gsc@20 {
compatible = "gw,gsc";
reg = <0x20>;
interrupt-parent = <&gpio1>;
- interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index a46ea98..736074f 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -182,7 +183,7 @@ &clks {
};
&ecspi3 {
- cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
status = "okay";
@@ -217,7 +218,7 @@ gsc: gsc@20 {
compatible = "gw,gsc";
reg = <0x20>;
interrupt-parent = <&gpio1>;
- interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index a28e794..8072ed4 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -210,7 +211,7 @@ gsc: gsc@20 {
compatible = "gw,gsc";
reg = <0x20>;
interrupt-parent = <&gpio1>;
- interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index b5f934b8..8c9bcdd 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
@@ -212,7 +213,7 @@ &clks {
};
&ecspi2 {
- cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
@@ -247,7 +248,7 @@ gsc: gsc@20 {
compatible = "gw,gsc";
reg = <0x20>;
interrupt-parent = <&gpio1>;
- interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index 1516e2b..e5d803d0 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -48,6 +48,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/media/tda1997x.h>
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
@@ -219,7 +220,7 @@ gsc: gsc@20 {
compatible = "gw,gsc";
reg = <0x20>;
interrupt-parent = <&gpio1>;
- interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index 0da6e6f..290a607 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -144,7 +145,7 @@ gsc: gsc@20 {
compatible = "gw,gsc";
reg = <0x20>;
interrupt-parent = <&gpio1>;
- interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
index db30de5..c15b9cc 100644
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -64,8 +65,6 @@ chosen {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
user-pb {
label = "user_pb";
@@ -182,7 +181,7 @@ gsc: gsc@20 {
compatible = "gw,gsc";
reg = <0x20>;
interrupt-parent = <&gpio1>;
- interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
index d6b0745..093a219 100644
--- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -252,7 +253,7 @@ &audmux {
};
&ecspi3 {
- cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
status = "okay";
@@ -294,7 +295,7 @@ gsc: gsc@20 {
compatible = "gw,gsc";
reg = <0x20>;
interrupt-parent = <&gpio1>;
- interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
index fbe6c32..e1c8dd2 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
chosen {
@@ -235,7 +236,7 @@ gsc: gsc@20 {
compatible = "gw,gsc";
reg = <0x20>;
interrupt-parent = <&gpio1>;
- interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
index 23c6e40..3cd2e71 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -257,7 +258,7 @@ gsc: gsc@20 {
compatible = "gw,gsc";
reg = <0x20>;
interrupt-parent = <&gpio1>;
- interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
index b1ff7c8..21c68a5 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -154,7 +155,7 @@ gsc: gsc@20 {
compatible = "gw,gsc";
reg = <0x20>;
interrupt-parent = <&gpio1>;
- interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
index 11f84ee..ed4e222 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -134,7 +135,7 @@ reg_wl: regulator-wl {
&ecspi3 {
- cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
status = "okay";
@@ -163,7 +164,7 @@ gsc: gsc@20 {
compatible = "gw,gsc";
reg = <0x20>;
interrupt-parent = <&gpio1>;
- interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
index 0a1ffff..797f160 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -129,7 +130,7 @@ &can1 {
};
&ecspi2 {
- cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
@@ -158,7 +159,7 @@ gsc: gsc@20 {
compatible = "gw,gsc";
reg = <0x20>;
interrupt-parent = <&gpio1>;
- interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
index d62a8da..4cd7d290 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -139,7 +140,7 @@ gsc: gsc@20 {
compatible = "gw,gsc";
reg = <0x20>;
interrupt-parent = <&gpio1>;
- interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
index e423133..eb1ad28 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
@@ -203,7 +203,7 @@ IMX_AUDMUX_V2_PDCR_RXDSEL(0)
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>;
- cs-gpios = <&gpio2 26 0>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
index 81c7ebb..265f5f3 100644
--- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
@@ -245,16 +245,16 @@ &can2 {
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
- cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>,
- <&gpio2 27 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>,
+ <&gpio2 27 GPIO_ACTIVE_LOW>;
};
/* SPI0 */
&ecspi4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi4>;
- cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>,
- <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
+ <&gpio3 29 GPIO_ACTIVE_LOW>;
status = "okay";
/* default boot source: workaround #1 for errata ERR006282 */
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index 185a1a3..a091782 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -316,7 +316,7 @@ &clks {
};
&ecspi1 {
- cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
index 4bbe54e..92d09a3 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -247,7 +247,7 @@ &clks {
};
&ecspi1 {
- cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index c63e1bc..1243677 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -232,7 +232,7 @@ &clks {
};
&ecspi1 {
- cs-gpios = <&gpio3 19 0>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index bc43c75..e361df2 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -71,7 +71,7 @@ &ecspi3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
status = "okay";
- cs-gpios = <&gpio4 24 0>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
som_flash: flash@0 {
compatible = "m25p80", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6qdl-pico.dtsi b/arch/arm/boot/dts/imx6qdl-pico.dtsi
index 39dfd90..5de4ccb 100644
--- a/arch/arm/boot/dts/imx6qdl-pico.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-pico.dtsi
@@ -167,7 +167,7 @@ &clks {
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
- cs-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 55f736d..afe477f 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -267,7 +267,7 @@ &clks {
};
&ecspi1 {
- cs-gpios = <&gpio3 19 0>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
status = "disabled"; /* pin conflict with WEIM NOR */
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 95f9dda..fdc3aa9 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -308,7 +308,7 @@ &clks {
};
&ecspi1 {
- cs-gpios = <&gpio3 19 0>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 68b3e68..f824c9a 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -105,9 +105,13 @@ sound {
"Ext Spk", "SPKOUTL",
"Ext Spk", "SPKOUTR",
"AMIC", "MICBIAS",
- "IN3R", "AMIC";
+ "IN3R", "AMIC",
+ "DMIC", "MICBIAS",
+ "DMICDAT", "DMIC";
mux-int-port = <2>;
mux-ext-port = <3>;
+ hp-det-gpio = <&gpio7 8 GPIO_ACTIVE_LOW>;
+ mic-det-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
backlight_lvds: backlight-lvds {
@@ -185,7 +189,7 @@ &clks {
};
&ecspi1 {
- cs-gpios = <&gpio4 9 0>;
+ cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
new file mode 100644
index 0000000..b18b83a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "supply-3p3v";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ m25p80: flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ m25p,fast-read;
+ };
+};
+
+&iomuxc {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ /* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b099
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0xb099
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0xb099
+ /* eCSPI1 SS1 */
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0xb099
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
+};
+
+&pmic {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ reg_vddcore: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-always-on;
+ };
+
+ reg_vddsoc: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-always-on;
+ };
+
+ reg_gen_3v3: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_ddr_1v5a: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-always-on;
+ };
+
+ reg_ddr_1v5b: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_5v_600mA: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ regulator-always-on;
+ };
+
+ reg_snvs_3v: vsnvs {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ reg_vrefddr: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vgen1_1v5: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ /* not used */
+ };
+
+ reg_vgen2_1v2_eth: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ reg_vgen3_2v8: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vgen4_1v8: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vgen5_1v8_eth: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vgen6_3v3: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+/* eMMC */
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ vmmc-supply = <®_3p3v>;
+ non-removable;
+ disable-wp;
+ no-sd;
+ no-sdio;
+ bus-width = <8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ mmccard: mmccard@0 {
+ reg = <0>;
+ compatible = "mmc-card";
+ broken-hpi;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
new file mode 100644
index 0000000..b679bec
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ pmic: pmic@8 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+ };
+
+ sensor@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ eeprom@50 {
+ compatible = "st,24c64", "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
new file mode 100644
index 0000000..49c4722
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ pmic: pmic@8 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+ };
+
+ sensor@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ eeprom@50 {
+ compatible = "st,24c64", "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi
index 267c956..f88da75 100644
--- a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi
@@ -95,7 +95,7 @@ &can2 {
};
&ecspi1 {
- cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
@@ -108,7 +108,7 @@ n25q064: flash@0 {
};
&ecspi2 {
- cs-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
index f0be516..e6aa0c3 100644
--- a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
@@ -165,7 +165,7 @@ &can2 {
};
&ecspi1 {
- cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
@@ -179,9 +179,9 @@ n25q064: flash@0 {
&ecspi2 {
cs-gpios = <
- &gpio5 31 GPIO_ACTIVE_HIGH
- &gpio7 12 GPIO_ACTIVE_HIGH
- &gpio5 18 GPIO_ACTIVE_HIGH
+ &gpio5 31 GPIO_ACTIVE_LOW
+ &gpio7 12 GPIO_ACTIVE_LOW
+ &gpio5 18 GPIO_ACTIVE_LOW
>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 5af9ce9..66b1574 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -316,7 +316,7 @@ eeprom@a4 {
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
status = "okay";
flash@0 {
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 43edbf1..7a8837c 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -159,7 +159,7 @@ dma_apbh: dma-apbh@110000 {
clocks = <&clks IMX6QDL_CLK_APBH_DMA>;
};
- gpmi: gpmi-nand@112000 {
+ gpmi: nand-controller@112000 {
compatible = "fsl,imx6q-gpmi-nand";
reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
reg-names = "gpmi-nand", "bch";
@@ -1043,8 +1043,9 @@ fec: ethernet@2188000 {
<0 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_ENET>,
<&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET_REF>,
<&clks IMX6QDL_CLK_ENET_REF>;
- clock-names = "ipg", "ahb", "ptp";
+ clock-names = "ipg", "ahb", "ptp", "enet_out";
fsl,stop-mode = <&gpr 0x34 27>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts
index 639d9dd..2bb3bfb 100644
--- a/arch/arm/boot/dts/imx6qp-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6qp-sabreauto.dts
@@ -47,7 +47,8 @@ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
};
&pcie {
- status = "disabled";
+ reset-gpio = <&max7310_c 5 GPIO_ACTIVE_LOW>;
+ status = "okay";
};
&sata {
diff --git a/arch/arm/boot/dts/imx6qp-tqma6b.dtsi b/arch/arm/boot/dts/imx6qp-tqma6b.dtsi
new file mode 100644
index 0000000..bb6ff7c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-tqma6b.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ */
+
+#include "imx6q.dtsi"
+#include "imx6qp.dtsi"
+#include "imx6qdl-tqma6b.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x40000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index b1b069e..25f6f2f 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -94,6 +94,8 @@ reg_lcd_5v: regulator-lcd-5v {
sound {
compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hp>;
model = "wm8962-audio";
ssi-controller = <&ssi2>;
audio-codec = <&codec>;
@@ -106,6 +108,7 @@ sound {
"IN3R", "AMIC";
mux-int-port = <2>;
mux-ext-port = <3>;
+ hp-det-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
};
panel {
@@ -129,7 +132,7 @@ &audmux {
};
&ecspi1 {
- cs-gpios = <&gpio4 11 0>;
+ cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
@@ -343,6 +346,12 @@ MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x3080
>;
};
+ pinctrl_hp: hpgrp {
+ fsl,pins = <
+ MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x1b0b0
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
new file mode 100644
index 0000000..caa2796
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
@@ -0,0 +1,588 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for the Tolino Shine 2 HD ebook reader
+ *
+ * Name on mainboard is: 37NB-E60QF0+4A2 or 37NB-E60QF0+4A3
+ * Serials start with: E60QF2
+ *
+ * Copyright 2020 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+
+/ {
+ model = "Tolino Shine 2 HD";
+ compatible = "kobo,tolino-shine2hd", "fsl,imx6sl";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ cover {
+ label = "Cover";
+ gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+ linux,code = <SW_LID>;
+ linux,input-type = <EV_SW>;
+ wakeup-source;
+ };
+
+ fl {
+ label = "Frontlight";
+ gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BRIGHTNESS_CYCLE>;
+ };
+
+ home {
+ label = "Home";
+ gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ };
+
+ power {
+ label = "Power";
+ gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led>;
+
+ on {
+ label = "tolinoshine2hd:white:on";
+ gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reg_wifi: regulator-wifi {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi_power>;
+ regulator-name = "SD3_SPWR";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi_reset>;
+ post-power-on-delay-ms = <20>;
+ reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_sleep>;
+ status = "okay";
+
+ /* TODO: embedded controller at 0x43 (driver missing) */
+
+};
+
+&i2c2 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_sleep>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ zforce: touchscreen@50 {
+ compatible = "neonode,zforce";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_zforce>;
+ reg = <0x50>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&ldo1_reg>;
+ reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ x-size = <1072>;
+ y-size = <1448>;
+ };
+
+ /* TODO: TPS65185 PMIC for E Ink at 0x68 */
+
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ ricoh619: pmic@32 {
+ compatible = "ricoh,rc5t619";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ricoh_gpio>;
+ reg = <0x32>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ system-power-controller;
+
+ regulators {
+ dcdc1_reg: DCDC1 {
+ regulator-name = "DCDC1";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-max-microvolt = <900000>;
+ regulator-suspend-min-microvolt = <900000>;
+ };
+ };
+
+ /* Core3_3V3 */
+ dcdc2_reg: DCDC2 {
+ regulator-name = "DCDC2";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-max-microvolt = <3100000>;
+ regulator-suspend-min-microvolt = <3100000>;
+ };
+ };
+
+ dcdc3_reg: DCDC3 {
+ regulator-name = "DCDC3";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-max-microvolt = <1140000>;
+ regulator-suspend-min-microvolt = <1140000>;
+ };
+ };
+
+ /* Core4_1V2 */
+ dcdc4_reg: DCDC4 {
+ regulator-name = "DCDC4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-max-microvolt = <1140000>;
+ regulator-suspend-min-microvolt = <1140000>;
+ };
+ };
+
+ /* Core4_1V8 */
+ dcdc5_reg: DCDC5 {
+ regulator-name = "DCDC5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-max-microvolt = <1700000>;
+ regulator-suspend-min-microvolt = <1700000>;
+ };
+ };
+
+ /* IR_3V3 */
+ ldo1_reg: LDO1 {
+ regulator-name = "LDO1";
+ regulator-boot-on;
+ };
+
+ /* Core1_3V3 */
+ ldo2_reg: LDO2 {
+ regulator-name = "LDO2";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-max-microvolt = <3000000>;
+ regulator-suspend-min-microvolt = <3000000>;
+ };
+ };
+
+ /* Core5_1V2 */
+ ldo3_reg: LDO3 {
+ regulator-name = "LDO3";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "LDO4";
+ regulator-boot-on;
+ };
+
+ /* SPD_3V3 */
+ ldo5_reg: LDO5 {
+ regulator-name = "LDO5";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* DDR_0V6 */
+ ldo6_reg: LDO6 {
+ regulator-name = "LDO6";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* VDD_PWM */
+ ldo7_reg: LDO7 {
+ regulator-name = "LDO7";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* ldo_1v8 */
+ ldo8_reg: LDO8 {
+ regulator-name = "LDO8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "LDO9";
+ regulator-boot-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "LDO10";
+ regulator-boot-on;
+ };
+
+ ldortc1_reg: LDORTC1 {
+ regulator-name = "LDORTC1";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_gpio_keys: gpio-keysgrp {
+ fsl,pins = <
+ MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x17059
+ MX6SL_PAD_SD1_DAT4__GPIO5_IO12 0x17059
+ MX6SL_PAD_KEY_COL1__GPIO3_IO26 0x17059
+ MX6SL_PAD_KEY_ROW0__GPIO3_IO25 0x17059
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6SL_PAD_LCD_DAT0__GPIO2_IO20 0x79
+ MX6SL_PAD_LCD_DAT1__GPIO2_IO21 0x79
+ MX6SL_PAD_LCD_DAT2__GPIO2_IO22 0x79
+ MX6SL_PAD_LCD_DAT3__GPIO2_IO23 0x79
+ MX6SL_PAD_LCD_DAT4__GPIO2_IO24 0x79
+ MX6SL_PAD_LCD_DAT5__GPIO2_IO25 0x79
+ MX6SL_PAD_LCD_DAT6__GPIO2_IO26 0x79
+ MX6SL_PAD_LCD_DAT7__GPIO2_IO27 0x79
+ MX6SL_PAD_LCD_DAT8__GPIO2_IO28 0x79
+ MX6SL_PAD_LCD_DAT9__GPIO2_IO29 0x79
+ MX6SL_PAD_LCD_DAT10__GPIO2_IO30 0x79
+ MX6SL_PAD_LCD_DAT11__GPIO2_IO31 0x79
+ MX6SL_PAD_LCD_DAT12__GPIO3_IO00 0x79
+ MX6SL_PAD_LCD_DAT13__GPIO3_IO01 0x79
+ MX6SL_PAD_LCD_DAT14__GPIO3_IO02 0x79
+ MX6SL_PAD_LCD_DAT15__GPIO3_IO03 0x79
+ MX6SL_PAD_LCD_DAT16__GPIO3_IO04 0x79
+ MX6SL_PAD_LCD_DAT17__GPIO3_IO05 0x79
+ MX6SL_PAD_LCD_DAT18__GPIO3_IO06 0x79
+ MX6SL_PAD_LCD_DAT19__GPIO3_IO07 0x79
+ MX6SL_PAD_LCD_DAT20__GPIO3_IO08 0x79
+ MX6SL_PAD_LCD_DAT21__GPIO3_IO09 0x79
+ MX6SL_PAD_LCD_DAT22__GPIO3_IO10 0x79
+ MX6SL_PAD_LCD_DAT23__GPIO3_IO11 0x79
+ MX6SL_PAD_LCD_CLK__GPIO2_IO15 0x79
+ MX6SL_PAD_LCD_ENABLE__GPIO2_IO16 0x79
+ MX6SL_PAD_LCD_HSYNC__GPIO2_IO17 0x79
+ MX6SL_PAD_LCD_VSYNC__GPIO2_IO18 0x79
+ MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x79
+ MX6SL_PAD_KEY_COL3__GPIO3_IO30 0x79
+ MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x79
+ MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79
+ MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x79
+ MX6SL_PAD_KEY_ROW6__GPIO4_IO05 0x79
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1
+ MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1
+ >;
+ };
+
+ pinctrl_i2c1_sleep: i2c1grp-sleep {
+ fsl,pins = <
+ MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1
+ MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1
+ MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1
+ >;
+ };
+
+ pinctrl_i2c2_sleep: i2c2grp-sleep {
+ fsl,pins = <
+ MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1
+ MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
+ MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
+ >;
+ };
+
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x17059
+ >;
+ };
+
+ pinctrl_ricoh_gpio: ricoh_gpiogrp {
+ fsl,pins = <
+ MX6SL_PAD_SD1_CLK__GPIO5_IO15 0x1b8b1 /* ricoh619 chg */
+ MX6SL_PAD_SD1_DAT0__GPIO5_IO11 0x1b8b1 /* ricoh619 irq */
+ MX6SL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+ MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x13059
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x130b9
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x130f9
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc2_sleep: usdhc2grp-sleep {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__GPIO5_IO04 0x100f9
+ MX6SL_PAD_SD2_CLK__GPIO5_IO05 0x100f9
+ MX6SL_PAD_SD2_DAT0__GPIO5_IO01 0x100f9
+ MX6SL_PAD_SD2_DAT1__GPIO4_IO30 0x100f9
+ MX6SL_PAD_SD2_DAT2__GPIO5_IO03 0x100f9
+ MX6SL_PAD_SD2_DAT3__GPIO4_IO28 0x100f9
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x11059
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x11059
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x11059
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x11059
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x11059
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x11059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x170b9
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x170f9
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc3_sleep: usdhc3grp-sleep {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x100c1
+ MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x100c1
+ MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x100c1
+ MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x100c1
+ MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x100c1
+ MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x100c1
+ >;
+ };
+
+ pinctrl_wifi_power: wifi-powergrp {
+ fsl,pins = <
+ MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */
+ >;
+ };
+
+ pinctrl_wifi_reset: wifi-resetgrp {
+ fsl,pins = <
+ MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x10059 /* WIFI_RST */
+ >;
+ };
+
+ pinctrl_zforce: zforcegrp {
+ fsl,pins = <
+ MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x17059 /* TP_INT */
+ MX6SL_PAD_SD1_DAT5__GPIO5_IO09 0x10059 /* TP_RST */
+ >;
+ };
+};
+
+®_vdd1p1 {
+ vin-supply = <&dcdc2_reg>;
+};
+
+®_vdd2p5 {
+ vin-supply = <&dcdc2_reg>;
+};
+
+®_arm {
+ vin-supply = <&dcdc3_reg>;
+};
+
+®_soc {
+ vin-supply = <&dcdc1_reg>;
+};
+
+®_pu {
+ vin-supply = <&dcdc1_reg>;
+};
+
+&snvs_rtc {
+ /*
+ * We are using the RTC in the PMIC, but this one is not disabled
+ * in imx6sl.dtsi.
+ */
+ status = "disabled";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+ non-removable;
+ status = "okay";
+
+ /* internal uSD card */
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+ vmmc-supply = <®_wifi>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ cap-power-off-card;
+ non-removable;
+ status = "okay";
+
+ /*
+ * 37NB-E60QF0+4A2: CyberTan WC121 (BCM43362) SDIO WiFi
+ * 37NB-E60QF0+4A3: RTL8189F SDIO WiFi
+ */
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ disable-over-current;
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 1c7180f..91a8c54 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -939,8 +939,10 @@ memory-controller@21b0000 {
};
rngb: rngb@21b4000 {
+ compatible = "fsl,imx6sl-rngb", "fsl,imx25-rngb";
reg = <0x021b4000 0x4000>;
interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_DUMMY>;
};
weim: weim@21b8000 {
diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
index c755cbd..32b3d82 100644
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -132,6 +132,31 @@ panel_in: endpoint {
};
};
};
+
+ sound {
+ compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hp>;
+ model = "wm8962-audio";
+ audio-cpu = <&ssi2>;
+ audio-codec = <&wm8962>;
+ audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "Ext Spk", "SPKOUTL",
+ "Ext Spk", "SPKOUTR",
+ "AMIC", "MICBIAS",
+ "IN3R", "AMIC";
+ mux-int-port = <2>;
+ mux-ext-port = <3>;
+ hp-det-gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux3>;
+ status = "okay";
};
&cpu0 {
@@ -247,6 +272,27 @@ vgen6_reg: vgen6 {
};
};
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ wm8962: audio-codec@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&clks IMX6SLL_CLK_EXTERN_AUDIO>;
+ DCVDD-supply = <&vgen3_reg>;
+ DBVDD-supply = <®_aud3v>;
+ AVDD-supply = <&vgen3_reg>;
+ CPVDD-supply = <&vgen3_reg>;
+ MICVDD-supply = <®_aud3v>;
+ PLLVDD-supply = <&vgen3_reg>;
+ SPKVDD1-supply = <®_aud4v>;
+ SPKVDD2-supply = <®_aud4v>;
+ };
+};
+
&lcdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd>;
@@ -274,6 +320,10 @@ &snvs_pwrkey {
status = "okay";
};
+&ssi2 {
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@@ -330,6 +380,22 @@ &wdog1 {
};
&iomuxc {
+ pinctrl_audmux3: audmux3grp {
+ fsl,pins = <
+ MX6SLL_PAD_AUD_TXC__AUD3_TXC 0x4130b0
+ MX6SLL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0
+ MX6SLL_PAD_AUD_TXD__AUD3_TXD 0x4110b0
+ MX6SLL_PAD_AUD_RXD__AUD3_RXD 0x4130b0
+ MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
+ >;
+ };
+
+ pinctrl_hp: hpgrp {
+ fsl,pins = <
+ MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */
+ >;
+ };
+
pinctrl_reg_sd3_vmmc: sd3vmmcgrp {
fsl,pins = <
MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059
@@ -449,6 +515,13 @@ MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1
>;
};
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SLL_PAD_AUD_RXFS__I2C3_SCL 0x4041b8b1
+ MX6SLL_PAD_AUD_RXC__I2C3_SDA 0x4041b8b1
+ >;
+ };
+
pinctrl_lcd: lcdgrp {
fsl,pins = <
MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x79
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index fb5d3bc..0b62220 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -786,6 +786,13 @@ mmdc: memory-controller@21b0000 {
clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>;
};
+ rngb: rng@21b4000 {
+ compatible = "fsl,imx6sll-rngb", "fsl,imx25-rngb";
+ reg = <0x021b4000 0x4000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_DUMMY>;
+ };
+
ocotp: efuse@21bc000 {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index b8c23eb..1351d7f 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -153,6 +153,8 @@ reg_can_stby: regulator-can-stby {
sound {
compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hp>;
model = "wm8962-audio";
ssi-controller = <&ssi2>;
audio-codec = <&codec>;
@@ -165,6 +167,7 @@ sound {
"IN3R", "AMIC";
mux-int-port = <2>;
mux-ext-port = <6>;
+ hp-det-gpio = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
panel {
@@ -468,6 +471,12 @@ MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
>;
};
+ pinctrl_hp: hpgrp {
+ fsl,pins = <
+ MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x17059
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
index d25e27d..5547916 100644
--- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
+++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
@@ -93,7 +93,7 @@ &cpu0 {
&ecspi4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi4>;
- cs-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index b480dfa..dfdca18 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -213,7 +213,7 @@ dma_apbh: dma-apbh@1804000 {
clocks = <&clks IMX6SX_CLK_APBH_DMA>;
};
- gpmi: gpmi-nand@1806000{
+ gpmi: nand-controller@1806000{
compatible = "fsl,imx6sx-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
index a35be2a..770f59b 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
@@ -84,7 +84,7 @@ &can2 {
};
&ecspi1 {
- cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
index 61ba21a..2a449a3 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
@@ -14,7 +14,7 @@ chosen {
};
&ecspi2 {
- cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
index 8d5f8dc..f1513e6 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
@@ -106,7 +106,7 @@ &clks {
&ecspi3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
- cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 2b088f2..d7d9f3e 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -174,7 +174,7 @@ dma_apbh: dma-apbh@1804000 {
clocks = <&clks IMX6UL_CLK_APBHDMA>;
};
- gpmi: gpmi-nand@1806000 {
+ gpmi: nand-controller@1806000 {
compatible = "fsl,imx6q-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 6cf9593..4436556 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -68,7 +68,7 @@ &can2 {
/* Colibri SPI */
&ecspi1 {
- cs-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
};
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index fcde7f7..9bf6749 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -68,6 +68,13 @@ dcp: crypto@2280000 {
clock-names = "dcp";
};
+ rngb: rng@2284000 {
+ compatible = "fsl,imx6ull-rngb", "fsl,imx25-rngb";
+ reg = <0x02284000 0x4000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_DUMMY>;
+ };
+
iomuxc_snvs: iomuxc-snvs@2290000 {
compatible = "fsl,imx6ull-iomuxc-snvs";
reg = <0x02290000 0x4000>;
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index e18e89d..62b771c 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -60,7 +60,7 @@ &cpu0 {
&ecspi3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>;
- cs-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
};
&fec1 {
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 17cca8a..ac0751b 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -146,6 +146,24 @@ panel_in: endpoint {
};
};
};
+
+ sound {
+ compatible = "fsl,imx7d-evk-wm8960",
+ "fsl,imx-audio-wm8960";
+ model = "wm8960-audio";
+ audio-cpu = <&sai1>;
+ audio-codec = <&codec>;
+ hp-det-gpio = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+ audio-routing =
+ "Headphone Jack", "HP_L",
+ "Headphone Jack", "HP_R",
+ "Ext Spk", "SPK_LP",
+ "Ext Spk", "SPK_LN",
+ "Ext Spk", "SPK_RP",
+ "Ext Spk", "SPK_RN",
+ "LINPUT1", "AMIC",
+ "AMIC", "MICB";
+ };
};
&adc1 {
@@ -169,7 +187,7 @@ &cpu1 {
&ecspi3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
- cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
status = "okay";
tsc2046@0 {
@@ -363,6 +381,13 @@ codec: wm8960@1a {
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
clock-names = "mclk";
wlf,shared-lrclk;
+ wlf,hp-cfg = <2 2 3>;
+ wlf,gpio-cfg = <1 3>;
+ assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
+ <&clks IMX7D_PLL_AUDIO_POST_DIV>,
+ <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+ assigned-clock-rates = <0>, <884736000>, <12288000>;
};
};
@@ -391,6 +416,28 @@ ®_1p2 {
vin-supply = <&sw2_reg>;
};
+&sai1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai1>;
+ assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+ <&clks IMX7D_PLL_AUDIO_POST_DIV>,
+ <&clks IMX7D_SAI1_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+ assigned-clock-rates = <0>, <884736000>, <36864000>;
+ status = "okay";
+};
+
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3 &pinctrl_sai3_mclk>;
+ assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>,
+ <&clks IMX7D_PLL_AUDIO_POST_DIV>,
+ <&clks IMX7D_SAI3_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+ assigned-clock-rates = <0>, <884736000>, <36864000>;
+ status = "okay";
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -550,6 +597,7 @@ MX7D_PAD_SD2_WP__GPIO5_IO10 0x59
pinctrl_hog: hoggrp {
fsl,pins = <
MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */
+ MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x59 /* headphone detect */
>;
};
@@ -615,6 +663,33 @@ MX7D_PAD_LCD_RESET__LCD_RESET 0x79
>;
};
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f
+ MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
+ MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f
+ MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30
+ MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK 0x1f
+ MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC 0x1f
+ MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0 0x30
+ MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0 0x1f
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK 0x1f
+ MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC 0x1f
+ MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x30
+ >;
+ };
+
pinctrl_spi4: spi4grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59
@@ -776,4 +851,10 @@ pinctrl_usb_otg2_vbus_reg: usbotg2vbusreggrp {
MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14
>;
};
+
+ pinctrl_sai3_mclk: sai3grp_mclk {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK 0x1f
+ >;
+ };
};
diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
index 7cb6153..1065941 100644
--- a/arch/arm/boot/dts/imx7d-zii-rmu2.dts
+++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
@@ -39,7 +39,7 @@ &cpu0 {
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
status = "okay";
flash@0 {
diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
index cbf0dbb..893bd30 100644
--- a/arch/arm/boot/dts/imx7d-zii-rpu2.dts
+++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
@@ -193,7 +193,7 @@ &clks {
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
status = "okay";
flash@0 {
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 1cfaf41..84d9cc1 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -1162,6 +1162,19 @@ usdhc3: mmc@30b60000 {
status = "disabled";
};
+ qspi: spi@30bb0000 {
+ compatible = "fsl,imx7d-qspi";
+ reg = <0x30bb0000 0x10000>, <0x60000000 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_QSPI_ROOT_CLK>,
+ <&clks IMX7D_QSPI_ROOT_CLK>;
+ clock-names = "qspi_en", "qspi";
+ status = "disabled";
+ };
+
sdma: sdma@30bd0000 {
compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
reg = <0x30bd0000 0x10000>;
@@ -1208,7 +1221,7 @@ dma_apbh: dma-apbh@33000000 {
clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
};
- gpmi: gpmi-nand@33002000{
+ gpmi: nand-controller@33002000{
compatible = "fsl,imx7d-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/infinity-msc313.dtsi b/arch/arm/boot/dts/infinity-msc313.dtsi
deleted file mode 100644
index 42f2b555..0000000
--- a/arch/arm/boot/dts/infinity-msc313.dtsi
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2020 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-#include "infinity.dtsi"
-
-/ {
- memory@20000000 {
- device_type = "memory";
- reg = <0x20000000 0x4000000>;
- };
-};
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index ebbe151..63cafd2 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -57,7 +57,7 @@ lcd_backlight: backlight {
lvds-receiver {
compatible = "ti,ds90cf384a", "lvds-decoder";
- powerdown-gpios = <&gpio7 25 GPIO_ACTIVE_LOW>;
+ power-supply = <&vcc_3v3_tft1>;
ports {
#address-cells = <1>;
@@ -81,6 +81,7 @@ lvds_receiver_out: endpoint {
panel {
compatible = "edt,etm0700g0dh6";
backlight = <&lcd_backlight>;
+ power-supply = <&vcc_3v3_tft1>;
port {
panel_in: endpoint {
@@ -113,6 +114,17 @@ sndcodec: simple-audio-card,codec {
};
};
+ vcc_3v3_tft1: regulator-panel {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vcc-3v3-tft1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ startup-delay-us = <500>;
+ gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+ };
+
vcc_sdhi1: regulator-vcc-sdhi1 {
compatible = "regulator-fixed";
@@ -207,6 +219,7 @@ touch: touchpanel@38 {
reg = <0x38>;
interrupt-parent = <&gpio2>;
interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+ vcc-supply = <&vcc_3v3_tft1>;
};
};
diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
index 395e05f..7d0468a 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
@@ -79,7 +79,7 @@ &vpll2 {
};
&dss {
- status = "ok";
+ status = "okay";
vdds_dsi-supply = <&vpll2>;
vdda_video-supply = <&video_reg>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
index b0f6613..533a47b 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -115,7 +115,7 @@ &vpll2 {
};
&dss {
- status = "ok";
+ status = "okay";
vdds_dsi-supply = <&vpll2>;
vdda_video-supply = <&vpll2>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index eadb083..7649dd1 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -11,13 +11,6 @@ / {
#size-cells = <1>;
interrupt-parent = <&gic>;
- L2: cache-controller@c4200000 {
- compatible = "arm,pl310-cache";
- reg = <0xc4200000 0x1000>;
- cache-unified;
- cache-level = <2>;
- };
-
soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -172,6 +165,13 @@ timer_abcde: timer@9940 {
};
};
+ L2: cache-controller@c4200000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xc4200000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
periph: bus@c4300000 {
compatible = "simple-bus";
reg = <0xc4300000 0x10000>;
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 277c0bb..04688e8 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -240,8 +240,6 @@ mali: gpu@c0000 {
<GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
index 1990239..d5ded4f 100644
--- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -207,8 +207,9 @@ dsi1_out_ep: endpoint {
};
};
- lcd0: display {
- compatible = "panel-dsi-cm";
+ lcd0: panel@0 {
+ compatible = "motorola,droid4-panel", "panel-dsi-cm";
+ reg = <0>;
label = "lcd0";
vddi-supply = <&lcd_regulator>;
reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
@@ -217,6 +218,7 @@ lcd0: display {
width-mm = <50>;
height-mm = <89>;
+ rotation = <90>;
panel-timing {
clock-frequency = <0>; /* Calculated by dsi */
diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts
index a5c91c2..005c275 100644
--- a/arch/arm/boot/dts/mpa1600.dts
+++ b/arch/arm/boot/dts/mpa1600.dts
@@ -11,7 +11,7 @@ / {
model = "Phontech MPA 1600";
compatible = "phontech,mpa1600", "atmel,at91rm9200";
- memory {
+ memory@20000000 {
reg = <0x20000000 0x4000000>;
};
diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi
index 96fb5a5..37f5023 100644
--- a/arch/arm/boot/dts/mps2.dtsi
+++ b/arch/arm/boot/dts/mps2.dtsi
@@ -161,9 +161,11 @@ timer1: mps2-timer1@1000 {
};
timer2: dual-timer@2000 {
- compatible = "arm,sp804";
+ compatible = "arm,sp804", "arm,primecell";
reg = <0x2000 0x1000>;
- clocks = <&sysclk>;
+ clocks = <&sysclk>, <&sysclk>, <&sysclk>;
+ clock-names = "timer0clk", "timer1clk",
+ "apb_pclk";
interrupts = <10>;
status = "disabled";
};
@@ -197,8 +199,8 @@ wdt: watchdog@8000 {
arm,primecell-periphid = <0x00141805>;
reg = <0x8000 0x1000>;
interrupts = <0>;
- clocks = <&sysclk>;
- clock-names = "apb_pclk";
+ clocks = <&sysclk>, <&sysclk>;
+ clock-names = "wdog_clk", "apb_pclk";
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/infinity-msc313-breadbee_crust.dts b/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts
similarity index 90%
rename from arch/arm/boot/dts/infinity-msc313-breadbee_crust.dts
rename to arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts
index f24c558..f9db2ff 100644
--- a/arch/arm/boot/dts/infinity-msc313-breadbee_crust.dts
+++ b/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts
@@ -5,7 +5,7 @@
*/
/dts-v1/;
-#include "infinity-msc313.dtsi"
+#include "mstar-infinity-msc313.dtsi"
/ {
model = "BreadBee Crust";
diff --git a/arch/arm/boot/dts/mercury5-ssc8336n.dtsi b/arch/arm/boot/dts/mstar-infinity-msc313.dtsi
similarity index 87%
copy from arch/arm/boot/dts/mercury5-ssc8336n.dtsi
copy to arch/arm/boot/dts/mstar-infinity-msc313.dtsi
index 7d4a463..3499fde 100644
--- a/arch/arm/boot/dts/mercury5-ssc8336n.dtsi
+++ b/arch/arm/boot/dts/mstar-infinity-msc313.dtsi
@@ -4,7 +4,7 @@
* Author: Daniel Palmer <daniel@thingy.jp>
*/
-#include "mercury5.dtsi"
+#include "mstar-infinity.dtsi"
/ {
memory@20000000 {
diff --git a/arch/arm/boot/dts/infinity.dtsi b/arch/arm/boot/dts/mstar-infinity.dtsi
similarity index 100%
rename from arch/arm/boot/dts/infinity.dtsi
rename to arch/arm/boot/dts/mstar-infinity.dtsi
diff --git a/arch/arm/boot/dts/infinity3-msc313e-breadbee.dts b/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts
similarity index 89%
rename from arch/arm/boot/dts/infinity3-msc313e-breadbee.dts
rename to arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts
index 1f93401..f0eda80 100644
--- a/arch/arm/boot/dts/infinity3-msc313e-breadbee.dts
+++ b/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts
@@ -5,7 +5,7 @@
*/
/dts-v1/;
-#include "infinity3-msc313e.dtsi"
+#include "mstar-infinity3-msc313e.dtsi"
/ {
model = "BreadBee";
diff --git a/arch/arm/boot/dts/infinity3-msc313e.dtsi b/arch/arm/boot/dts/mstar-infinity3-msc313e.dtsi
similarity index 87%
rename from arch/arm/boot/dts/infinity3-msc313e.dtsi
rename to arch/arm/boot/dts/mstar-infinity3-msc313e.dtsi
index 4e7239a..f581b6f 100644
--- a/arch/arm/boot/dts/infinity3-msc313e.dtsi
+++ b/arch/arm/boot/dts/mstar-infinity3-msc313e.dtsi
@@ -4,7 +4,7 @@
* Author: Daniel Palmer <daniel@thingy.jp>
*/
-#include "infinity3.dtsi"
+#include "mstar-infinity3.dtsi"
/ {
memory@20000000 {
diff --git a/arch/arm/boot/dts/infinity3.dtsi b/arch/arm/boot/dts/mstar-infinity3.dtsi
similarity index 84%
rename from arch/arm/boot/dts/infinity3.dtsi
rename to arch/arm/boot/dts/mstar-infinity3.dtsi
index 9b918c8..9857e2a9 100644
--- a/arch/arm/boot/dts/infinity3.dtsi
+++ b/arch/arm/boot/dts/mstar-infinity3.dtsi
@@ -4,7 +4,7 @@
* Author: Daniel Palmer <daniel@thingy.jp>
*/
-#include "infinity.dtsi"
+#include "mstar-infinity.dtsi"
&imi {
reg = <0xa0000000 0x20000>;
diff --git a/arch/arm/boot/dts/mercury5-ssc8336n-midrived08.dts b/arch/arm/boot/dts/mstar-mercury5-ssc8336n-midrived08.dts
similarity index 89%
rename from arch/arm/boot/dts/mercury5-ssc8336n-midrived08.dts
rename to arch/arm/boot/dts/mstar-mercury5-ssc8336n-midrived08.dts
index f24bd8c..7306b73 100644
--- a/arch/arm/boot/dts/mercury5-ssc8336n-midrived08.dts
+++ b/arch/arm/boot/dts/mstar-mercury5-ssc8336n-midrived08.dts
@@ -5,7 +5,7 @@
*/
/dts-v1/;
-#include "mercury5-ssc8336n.dtsi"
+#include "mstar-mercury5-ssc8336n.dtsi"
/ {
model = "70mai Midrive D08";
diff --git a/arch/arm/boot/dts/mercury5-ssc8336n.dtsi b/arch/arm/boot/dts/mstar-mercury5-ssc8336n.dtsi
similarity index 87%
rename from arch/arm/boot/dts/mercury5-ssc8336n.dtsi
rename to arch/arm/boot/dts/mstar-mercury5-ssc8336n.dtsi
index 7d4a463..3f5a4c0 100644
--- a/arch/arm/boot/dts/mercury5-ssc8336n.dtsi
+++ b/arch/arm/boot/dts/mstar-mercury5-ssc8336n.dtsi
@@ -4,7 +4,7 @@
* Author: Daniel Palmer <daniel@thingy.jp>
*/
-#include "mercury5.dtsi"
+#include "mstar-mercury5.dtsi"
/ {
memory@20000000 {
diff --git a/arch/arm/boot/dts/mercury5.dtsi b/arch/arm/boot/dts/mstar-mercury5.dtsi
similarity index 100%
rename from arch/arm/boot/dts/mercury5.dtsi
rename to arch/arm/boot/dts/mstar-mercury5.dtsi
diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi
index 3b7b9b7..f078805 100644
--- a/arch/arm/boot/dts/mstar-v7.dtsi
+++ b/arch/arm/boot/dts/mstar-v7.dtsi
@@ -85,6 +85,25 @@ reboot {
mask = <0x79>;
};
+ intc_fiq: interrupt-controller@201310 {
+ compatible = "mstar,mst-intc";
+ reg = <0x201310 0x40>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ mstar,irqs-map-range = <96 127>;
+ };
+
+ intc_irq: interrupt-controller@201350 {
+ compatible = "mstar,mst-intc";
+ reg = <0x201350 0x40>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ mstar,irqs-map-range = <32 95>;
+ mstar,intc-no-eoi;
+ };
+
l3bridge: l3bridge@204400 {
compatible = "mstar,l3bridge";
reg = <0x204400 0x200>;
@@ -94,6 +113,7 @@ pm_uart: uart@221000 {
compatible = "ns16550a";
reg = <0x221000 0x100>;
reg-shift = <3>;
+ interrupts-extended = <&intc_irq GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <172000000>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 39b3a2f..fade142 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -569,6 +569,19 @@ jpegdec: jpegdec@15004000 {
<&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
};
+ jpegenc: jpegenc@1500a000 {
+ compatible = "mediatek,mt2701-jpgenc",
+ "mediatek,mtk-jpgenc";
+ reg = <0 0x1500a000 0 0x1000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&imgsys CLK_IMG_VENC>;
+ clock-names = "jpgenc";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ mediatek,larb = <&larb2>;
+ iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
+ <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
+ };
+
vdecsys: syscon@16000000 {
compatible = "mediatek,mt2701-vdecsys", "syscon";
reg = <0 0x16000000 0 0x1000>;
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 3a6b856..aea6809 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -14,7 +14,6 @@
#include <dt-bindings/power/mt2701-power.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/phy/phy.h>
-#include <dt-bindings/memory/mt2701-larb-port.h>
#include <dt-bindings/reset/mt2701-resets.h>
#include <dt-bindings/thermal/thermal.h>
@@ -297,17 +296,6 @@ timer: timer@10008000 {
clock-names = "system-clk", "rtc-clk";
};
- smi_common: smi@1000c000 {
- compatible = "mediatek,mt7623-smi-common",
- "mediatek,mt2701-smi-common";
- reg = <0 0x1000c000 0 0x1000>;
- clocks = <&infracfg CLK_INFRA_SMI>,
- <&mmsys CLK_MM_SMI_COMMON>,
- <&infracfg CLK_INFRA_SMI>;
- clock-names = "apb", "smi", "async";
- power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
- };
-
pwrap: pwrap@1000d000 {
compatible = "mediatek,mt7623-pwrap",
"mediatek,mt2701-pwrap";
@@ -339,17 +327,6 @@ sysirq: interrupt-controller@10200100 {
reg = <0 0x10200100 0 0x1c>;
};
- iommu: mmsys_iommu@10205000 {
- compatible = "mediatek,mt7623-m4u",
- "mediatek,mt2701-m4u";
- reg = <0 0x10205000 0 0x1000>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&infracfg CLK_INFRA_M4U>;
- clock-names = "bclk";
- mediatek,larbs = <&larb0 &larb1 &larb2>;
- #iommu-cells = <1>;
- };
-
efuse: efuse@10206000 {
compatible = "mediatek,mt7623-efuse",
"mediatek,mt8173-efuse";
@@ -725,94 +702,6 @@ mmc1: mmc@11240000 {
status = "disabled";
};
- g3dsys: syscon@13000000 {
- compatible = "mediatek,mt7623-g3dsys",
- "mediatek,mt2701-g3dsys",
- "syscon";
- reg = <0 0x13000000 0 0x200>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- mali: gpu@13040000 {
- compatible = "mediatek,mt7623-mali", "arm,mali-450";
- reg = <0 0x13040000 0 0x30000>;
- interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 171 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 172 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 173 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 174 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 177 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 178 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 179 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
- interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1",
- "ppmmu1", "pp2", "ppmmu2", "pp3", "ppmmu3",
- "pp";
- clocks = <&topckgen CLK_TOP_MMPLL>,
- <&g3dsys CLK_G3DSYS_CORE>;
- clock-names = "bus", "core";
- power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>;
- resets = <&g3dsys MT2701_G3DSYS_CORE_RST>;
- };
-
- mmsys: syscon@14000000 {
- compatible = "mediatek,mt7623-mmsys",
- "mediatek,mt2701-mmsys",
- "syscon";
- reg = <0 0x14000000 0 0x1000>;
- #clock-cells = <1>;
- };
-
- larb0: larb@14010000 {
- compatible = "mediatek,mt7623-smi-larb",
- "mediatek,mt2701-smi-larb";
- reg = <0 0x14010000 0 0x1000>;
- mediatek,smi = <&smi_common>;
- mediatek,larb-id = <0>;
- clocks = <&mmsys CLK_MM_SMI_LARB0>,
- <&mmsys CLK_MM_SMI_LARB0>;
- clock-names = "apb", "smi";
- power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
- };
-
- imgsys: syscon@15000000 {
- compatible = "mediatek,mt7623-imgsys",
- "mediatek,mt2701-imgsys",
- "syscon";
- reg = <0 0x15000000 0 0x1000>;
- #clock-cells = <1>;
- };
-
- larb2: larb@15001000 {
- compatible = "mediatek,mt7623-smi-larb",
- "mediatek,mt2701-smi-larb";
- reg = <0 0x15001000 0 0x1000>;
- mediatek,smi = <&smi_common>;
- mediatek,larb-id = <2>;
- clocks = <&imgsys CLK_IMG_SMI_COMM>,
- <&imgsys CLK_IMG_SMI_COMM>;
- clock-names = "apb", "smi";
- power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
- };
-
- jpegdec: jpegdec@15004000 {
- compatible = "mediatek,mt7623-jpgdec",
- "mediatek,mt2701-jpgdec";
- reg = <0 0x15004000 0 0x1000>;
- interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
- <&imgsys CLK_IMG_JPGDEC>;
- clock-names = "jpgdec-smi",
- "jpgdec";
- power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
- mediatek,larb = <&larb2>;
- iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
- <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
- };
-
vdecsys: syscon@16000000 {
compatible = "mediatek,mt7623-vdecsys",
"mediatek,mt2701-vdecsys",
@@ -821,18 +710,6 @@ vdecsys: syscon@16000000 {
#clock-cells = <1>;
};
- larb1: larb@16010000 {
- compatible = "mediatek,mt7623-smi-larb",
- "mediatek,mt2701-smi-larb";
- reg = <0 0x16010000 0 0x1000>;
- mediatek,smi = <&smi_common>;
- mediatek,larb-id = <1>;
- clocks = <&vdecsys CLK_VDEC_CKGEN>,
- <&vdecsys CLK_VDEC_LARB>;
- clock-names = "apb", "smi";
- power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
- };
-
hifsys: syscon@1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 2b760f9..e96aa0e 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -6,7 +6,7 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
-#include "mt7623.dtsi"
+#include "mt7623n.dtsi"
#include "mt6323.dtsi"
/ {
@@ -21,6 +21,19 @@ chosen {
stdout-path = "serial2:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+ type = "d";
+ ddc-i2c-bus = <&hdmiddc0>;
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi0_out>;
+ };
+ };
+ };
+
cpus {
cpu@0 {
proc-supply = <&mt6323_vproc_reg>;
@@ -66,6 +79,13 @@ reg_5v: regulator-5v {
regulator-always-on;
};
+ reg_vgpu: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_fixed_vgpu";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
@@ -114,10 +134,18 @@ memory@80000000 {
};
};
+&bls {
+ status = "okay";
+};
+
&btif {
status = "okay";
};
+&cec {
+ status = "okay";
+};
+
&cir {
pinctrl-names = "default";
pinctrl-0 = <&cir_pins_a>;
@@ -128,6 +156,21 @@ &crypto {
status = "okay";
};
+&dpi0 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dpi0_out: endpoint {
+ remote-endpoint = <&hdmi0_in>;
+ };
+ };
+ };
+};
+
ð {
status = "okay";
@@ -192,6 +235,7 @@ port@6 {
fixed-link {
speed = <1000>;
full-duplex;
+ pause;
};
};
};
@@ -199,6 +243,42 @@ fixed-link {
};
};
+&hdmi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins_a>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ hdmi0_in: endpoint {
+ remote-endpoint = <&dpi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+};
+
+&hdmiddc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_ddc_pins_a>;
+ status = "okay";
+};
+
+&hdmi_phy {
+ mediatek,ibias = <0xa>;
+ mediatek,ibias_up = <0x1c>;
+ status = "okay";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@@ -211,6 +291,11 @@ &i2c1 {
status = "okay";
};
+&mali {
+ mali-supply = <®_vgpu>;
+ status = "okay";
+};
+
&mmc0 {
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc0_pins_default>;
@@ -330,4 +415,3 @@ &u3phy1 {
&u3phy2 {
status = "okay";
};
-
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
index 0447748..1b9b9a8 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -7,7 +7,7 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
-#include "mt7623.dtsi"
+#include "mt7623n.dtsi"
#include "mt6323.dtsi"
/ {
@@ -24,6 +24,19 @@ chosen {
stdout-path = "serial2:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+ type = "d";
+ ddc-i2c-bus = <&hdmiddc0>;
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi0_out>;
+ };
+ };
+ };
+
cpus {
cpu@0 {
proc-supply = <&mt6323_vproc_reg>;
@@ -106,10 +119,18 @@ sound {
};
};
+&bls {
+ status = "okay";
+};
+
&btif {
status = "okay";
};
+&cec {
+ status = "okay";
+};
+
&cir {
pinctrl-names = "default";
pinctrl-0 = <&cir_pins_a>;
@@ -120,6 +141,21 @@ &crypto {
status = "okay";
};
+&dpi0 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dpi0_out: endpoint {
+ remote-endpoint = <&hdmi0_in>;
+ };
+ };
+ };
+};
+
ð {
status = "okay";
@@ -203,6 +239,42 @@ fixed-link {
};
};
+&hdmi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins_a>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ hdmi0_in: endpoint {
+ remote-endpoint = <&dpi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+};
+
+&hdmiddc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_ddc_pins_a>;
+ status = "okay";
+};
+
+&hdmi_phy {
+ mediatek,ibias = <0xa>;
+ mediatek,ibias_up = <0x1c>;
+ status = "okay";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi
new file mode 100644
index 0000000..1880ac9
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n.dtsi
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright © 2017-2020 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ * Ryder Lee <ryder.lee@mediatek.com>
+ *
+ */
+
+#include "mt7623.dtsi"
+#include <dt-bindings/memory/mt2701-larb-port.h>
+
+/ {
+ aliases {
+ rdma0 = &rdma0;
+ rdma1 = &rdma1;
+ };
+
+ g3dsys: syscon@13000000 {
+ compatible = "mediatek,mt7623-g3dsys",
+ "mediatek,mt2701-g3dsys",
+ "syscon";
+ reg = <0 0x13000000 0 0x200>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ mali: gpu@13040000 {
+ compatible = "mediatek,mt7623-mali", "arm,mali-450";
+ reg = <0 0x13040000 0 0x30000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 171 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 172 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 173 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 174 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 177 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 179 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1",
+ "ppmmu1", "pp2", "ppmmu2", "pp3", "ppmmu3",
+ "pp";
+ clocks = <&topckgen CLK_TOP_MMPLL>,
+ <&g3dsys CLK_G3DSYS_CORE>;
+ clock-names = "bus", "core";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>;
+ resets = <&g3dsys MT2701_G3DSYS_CORE_RST>;
+ };
+
+ mmsys: syscon@14000000 {
+ compatible = "mediatek,mt7623-mmsys",
+ "mediatek,mt2701-mmsys",
+ "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ larb0: larb@14010000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x14010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <0>;
+ clocks = <&mmsys CLK_MM_SMI_LARB0>,
+ <&mmsys CLK_MM_SMI_LARB0>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
+ larb1: larb@16010000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x16010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <1>;
+ clocks = <&vdecsys CLK_VDEC_CKGEN>,
+ <&vdecsys CLK_VDEC_LARB>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
+ };
+
+ larb2: larb@15001000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x15001000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <2>;
+ clocks = <&imgsys CLK_IMG_SMI_COMM>,
+ <&imgsys CLK_IMG_SMI_COMM>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ };
+
+ imgsys: syscon@15000000 {
+ compatible = "mediatek,mt7623-imgsys",
+ "mediatek,mt2701-imgsys",
+ "syscon";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ iommu: mmsys_iommu@10205000 {
+ compatible = "mediatek,mt7623-m4u",
+ "mediatek,mt2701-m4u";
+ reg = <0 0x10205000 0 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_M4U>;
+ clock-names = "bclk";
+ mediatek,larbs = <&larb0 &larb1 &larb2>;
+ #iommu-cells = <1>;
+ };
+
+ jpegdec: jpegdec@15004000 {
+ compatible = "mediatek,mt7623-jpgdec",
+ "mediatek,mt2701-jpgdec";
+ reg = <0 0x15004000 0 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
+ <&imgsys CLK_IMG_JPGDEC>;
+ clock-names = "jpgdec-smi",
+ "jpgdec";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ mediatek,larb = <&larb2>;
+ iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+ <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+ };
+
+ smi_common: smi@1000c000 {
+ compatible = "mediatek,mt7623-smi-common",
+ "mediatek,mt2701-smi-common";
+ reg = <0 0x1000c000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_SMI>,
+ <&mmsys CLK_MM_SMI_COMMON>,
+ <&infracfg CLK_INFRA_SMI>;
+ clock-names = "apb", "smi", "async";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
+ ovl: ovl@14007000 {
+ compatible = "mediatek,mt7623-disp-ovl",
+ "mediatek,mt2701-disp-ovl";
+ reg = <0 0x14007000 0 0x1000>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_OVL>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
+ mediatek,larb = <&larb0>;
+ };
+
+ rdma0: rdma@14008000 {
+ compatible = "mediatek,mt7623-disp-rdma",
+ "mediatek,mt2701-disp-rdma";
+ reg = <0 0x14008000 0 0x1000>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
+ mediatek,larb = <&larb0>;
+ };
+
+ wdma@14009000 {
+ compatible = "mediatek,mt7623-disp-wdma",
+ "mediatek,mt2701-disp-wdma";
+ reg = <0 0x14009000 0 0x1000>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_WDMA>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
+ mediatek,larb = <&larb0>;
+ };
+
+ bls: pwm@1400a000 {
+ compatible = "mediatek,mt7623-disp-pwm",
+ "mediatek,mt2701-disp-pwm";
+ reg = <0 0x1400a000 0 0x1000>;
+ #pwm-cells = <2>;
+ clocks = <&mmsys CLK_MM_MDP_BLS_26M>,
+ <&mmsys CLK_MM_DISP_BLS>;
+ clock-names = "main", "mm";
+ status = "disabled";
+ };
+
+ color: color@1400b000 {
+ compatible = "mediatek,mt7623-disp-color",
+ "mediatek,mt2701-disp-color";
+ reg = <0 0x1400b000 0 0x1000>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_COLOR>;
+ };
+
+ dsi: dsi@1400c000 {
+ compatible = "mediatek,mt7623-dsi",
+ "mediatek,mt2701-dsi";
+ reg = <0 0x1400c000 0 0x1000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DSI_ENGINE>,
+ <&mmsys CLK_MM_DSI_DIG>,
+ <&mipi_tx0>;
+ clock-names = "engine", "digital", "hs";
+ phys = <&mipi_tx0>;
+ phy-names = "dphy";
+ status = "disabled";
+ };
+
+ mutex: mutex@1400e000 {
+ compatible = "mediatek,mt7623-disp-mutex",
+ "mediatek,mt2701-disp-mutex";
+ reg = <0 0x1400e000 0 0x1000>;
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_MUTEX_32K>;
+ };
+
+ rdma1: rdma@14012000 {
+ compatible = "mediatek,mt7623-disp-rdma",
+ "mediatek,mt2701-disp-rdma";
+ reg = <0 0x14012000 0 0x1000>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
+ mediatek,larb = <&larb0>;
+ };
+
+ dpi0: dpi@14014000 {
+ compatible = "mediatek,mt7623-dpi",
+ "mediatek,mt2701-dpi";
+ reg = <0 0x14014000 0 0x1000>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DPI1_DIGL>,
+ <&mmsys CLK_MM_DPI1_ENGINE>,
+ <&apmixedsys CLK_APMIXED_TVDPLL>;
+ clock-names = "pixel", "engine", "pll";
+ status = "disabled";
+ };
+
+ hdmi0: hdmi@14015000 {
+ compatible = "mediatek,mt7623-hdmi",
+ "mediatek,mt2701-hdmi";
+ reg = <0 0x14015000 0 0x400>;
+ clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
+ <&mmsys CLK_MM_HDMI_PLL>,
+ <&mmsys CLK_MM_HDMI_AUDIO>,
+ <&mmsys CLK_MM_HDMI_SPDIF>;
+ clock-names = "pixel", "pll", "bclk", "spdif";
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi";
+ mediatek,syscon-hdmi = <&mmsys 0x900>;
+ cec = <&cec>;
+ status = "disabled";
+ };
+
+ mipi_tx0: mipi-dphy@10010000 {
+ compatible = "mediatek,mt7623-mipi-tx",
+ "mediatek,mt2701-mipi-tx";
+ reg = <0 0x10010000 0 0x90>;
+ clocks = <&clk26m>;
+ clock-output-names = "mipi_tx0_pll";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ };
+
+ cec: cec@10012000 {
+ compatible = "mediatek,mt7623-cec",
+ "mediatek,mt8173-cec";
+ reg = <0 0x10012000 0 0xbc>;
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_CEC>;
+ status = "disabled";
+ };
+
+ hdmi_phy: phy@10209100 {
+ compatible = "mediatek,mt7623-hdmi-phy",
+ "mediatek,mt2701-hdmi-phy";
+ reg = <0 0x10209100 0 0x24>;
+ clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+ clock-names = "pll_ref";
+ clock-output-names = "hdmitx_dig_cts";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ hdmiddc0: i2c@11013000 {
+ compatible = "mediatek,mt7623-hdmi-ddc",
+ "mediatek,mt8173-hdmi-ddc";
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+ reg = <0 0x11013000 0 0x1C>;
+ clocks = <&pericfg CLK_PERI_I2C3>;
+ clock-names = "ddc-i2c";
+ status = "disabled";
+ };
+};
+
+&pio {
+ hdmi_pins_a: hdmi-default {
+ pins-hdmi {
+ pinmux = <MT7623_PIN_123_HTPLG_FUNC_HTPLG>;
+ input-enable;
+ bias-pull-down;
+ };
+ };
+
+ hdmi_ddc_pins_a: hdmi_ddc-default {
+ pins-hdmi-ddc {
+ pinmux = <MT7623_PIN_124_GPIO124_FUNC_HDMISCK>,
+ <MT7623_PIN_125_GPIO125_FUNC_HDMISD>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi
index d9a0fd7..90e033d 100644
--- a/arch/arm/boot/dts/nspire.dtsi
+++ b/arch/arm/boot/dts/nspire.dtsi
@@ -145,15 +145,19 @@ uart: serial@90020000 {
timer0: timer@900C0000 {
reg = <0x900C0000 0x1000>;
-
- clocks = <&timer_clk>;
+ clocks = <&timer_clk>, <&timer_clk>,
+ <&timer_clk>;
+ clock-names = "timer0clk", "timer1clk",
+ "apb_pclk";
};
timer1: timer@900D0000 {
reg = <0x900D0000 0x1000>;
interrupts = <19>;
-
- clocks = <&timer_clk>;
+ clocks = <&timer_clk>, <&timer_clk>,
+ <&timer_clk>;
+ clock-names = "timer0clk", "timer1clk",
+ "apb_pclk";
};
watchdog: watchdog@90060000 {
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 05077f3..252507c 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -389,7 +389,7 @@ &mcbsp2 {
};
&dss {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <
@@ -406,7 +406,7 @@ dpi_out: endpoint {
};
&venc {
- status = "ok";
+ status = "okay";
vdda-supply = <&vdac>;
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 79bc710..f9f34b8 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -386,7 +386,7 @@ &vpll2 {
};
&dss {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_dpi_pins>;
@@ -400,7 +400,7 @@ dpi_out: endpoint {
};
&venc {
- status = "ok";
+ status = "okay";
vdda-supply = <&vdac>;
@@ -413,7 +413,7 @@ venc_out: endpoint {
};
&gpmc {
- status = "ok";
+ status = "okay";
ranges = <0 0 0x30000000 0x1000000>; /* CS0 space, 16MB */
/* Chip select 0 */
diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts
index 632f52e..3b83490 100644
--- a/arch/arm/boot/dts/omap3-cm-t3517.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3517.dts
@@ -147,7 +147,7 @@ wlcore: wlcore@2 {
};
&dss {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <
diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts
index 32dbaea..bc545ee 100644
--- a/arch/arm/boot/dts/omap3-cm-t3530.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3530.dts
@@ -49,7 +49,7 @@ &mmc2 {
};
&dss {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <
diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
index 683819b..48e48b0 100644
--- a/arch/arm/boot/dts/omap3-cm-t3730.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
@@ -87,7 +87,7 @@ wlcore: wlcore@2 {
};
&dss {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index cdb632d..e61b8a2 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -246,7 +246,7 @@ ads7846@0 {
};
&venc {
- status = "ok";
+ status = "okay";
port {
venc_out: endpoint {
@@ -257,7 +257,7 @@ venc_out: endpoint {
};
&mcbsp2 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
diff --git a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
index aee46fa..1ed8378 100644
--- a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
+++ b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
@@ -17,4 +17,25 @@ cpu_thermal: cpu_thermal {
/* sensor ID */
thermal-sensors = <&bandgap 0>;
+
+ cpu_trips: trips {
+ cpu_alert0: cpu_alert {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_crit: cpu_crit {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cpu_cooling_maps: cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&cpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index ac3d996..2c19d6e2 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -337,7 +337,7 @@ &vpll1 {
};
&dss {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_dpi_pins>;
@@ -361,7 +361,7 @@ endpoint@1 {
};
&venc {
- status = "ok";
+ status = "okay";
vdda-supply = <&vdac>;
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index ecc4586..c8745bc 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -822,27 +822,27 @@ filesystem@880000 {
};
&mcbsp1 { /* FM Transceiver PCM */
- status = "ok";
+ status = "okay";
#sound-dai-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&mcbsp1_pins>;
};
&mcbsp2 { /* TPS65950 I2S */
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
};
&mcbsp3 { /* Bluetooth PCM */
- status = "ok";
+ status = "okay";
#sound-dai-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&mcbsp3_pins>;
};
&mcbsp4 { /* GSM voice PCM */
- status = "ok";
+ status = "okay";
#sound-dai-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&mcbsp4_pins>;
diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts
index b3f7f99..643283f 100644
--- a/arch/arm/boot/dts/omap3-ha-lcd.dts
+++ b/arch/arm/boot/dts/omap3-ha-lcd.dts
@@ -100,7 +100,7 @@ &vpll2 {
};
&dss {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_dpi_pins>;
diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
index 91caa50..af8aa5f 100644
--- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi
+++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
@@ -245,7 +245,7 @@ &vpll2 {
};
&dss {
- status = "ok";
+ status = "okay";
port {
dpi_out: endpoint {
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
index 2495a69..d211bcc 100644
--- a/arch/arm/boot/dts/omap3-n9.dts
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -23,7 +23,6 @@ smia_1: camera@10 {
vana-supply = <&vaux3>;
clocks = <&isp 0>;
clock-frequency = <9600000>;
- nokia,nvm-size = <(16 * 64)>;
flash-leds = <&as3645a_flash &as3645a_indicator>;
port {
smia_1_1: endpoint {
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index bc24e3d..32335d4 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -1083,7 +1083,7 @@ &uart3 {
};
&dss {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_sdi_pins>;
@@ -1106,7 +1106,7 @@ sdi_out: endpoint {
};
&venc {
- status = "ok";
+ status = "okay";
vdda-supply = <&vdac>;
@@ -1119,7 +1119,7 @@ venc_out: endpoint {
};
&mcbsp2 {
- status = "ok";
+ status = "okay";
};
&ssi_port1 {
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
index 31d47a1..b2f4800 100644
--- a/arch/arm/boot/dts/omap3-n950.dts
+++ b/arch/arm/boot/dts/omap3-n950.dts
@@ -76,7 +76,6 @@ smia_1: camera@10 {
vana-supply = <&vaux3>;
clocks = <&isp 0>;
clock-frequency = <9600000>;
- nokia,nvm-size = <(16 * 64)>;
flash-leds = <&as3645a_flash &as3645a_indicator>;
port {
smia_1_1: endpoint {
@@ -205,13 +204,13 @@ &lis302 {
};
&dss {
- status = "ok";
+ status = "okay";
vdda_video-supply = <&vdac>;
};
&dsi {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dsi_pins>;
@@ -225,8 +224,9 @@ dsi_out_ep: endpoint {
};
};
- lcd0: display {
+ lcd0: panel@0 {
compatible = "nokia,himalaya", "panel-dsi-cm";
+ reg = <0>;
label = "lcd0";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi
index c9e62e4..339a51f 100644
--- a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi
@@ -48,7 +48,7 @@ &vpll2 {
};
&dss {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_dpi_pins>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index 185ce53..1d6e88f 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -76,7 +76,7 @@ &vpll2 {
};
&dss {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_dpi_pins>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
index 7fe0f91..7e30f9d 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -75,7 +75,7 @@ &vpll2 {
};
&dss {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_dpi_pins>;
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index 150d5be4..37608af 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -702,7 +702,7 @@ &mcbsp4 {
};
&venc {
- status = "ok";
+ status = "okay";
vdda-supply = <&vdac>;
@@ -718,7 +718,7 @@ &dss {
pinctrl-names = "default";
pinctrl-0 = < &dss_dpi_pins >;
- status = "ok";
+ status = "okay";
vdds_dsi-supply = <&vpll2>;
port {
diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
index b8b9fcc..2dbb687 100644
--- a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
+++ b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
@@ -46,7 +46,7 @@ &vpll2 {
};
&dss {
- status = "ok";
+ status = "okay";
port {
dpi_out: endpoint {
remote-endpoint = <&lcd_in>;
diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts
index f7930f1..d82cab8 100644
--- a/arch/arm/boot/dts/omap3-thunder.dts
+++ b/arch/arm/boot/dts/omap3-thunder.dts
@@ -64,7 +64,7 @@ &vpll2 {
};
&dss {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_dpi_pins>;
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index cf22a7e..9dcae1f 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -941,6 +941,9 @@ dsi: encoder@4804fc00 {
ti,hwmods = "dss_dsi1";
clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>;
clock-names = "fck", "sys_clk";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
};
rfbi: encoder@48050800 {
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 9c3ee4a..feaa43b 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -20,6 +20,7 @@ cpu: cpu@0 {
operating-points-v2 = <&cpu0_opp_table>;
clock-latency = <300000>; /* From legacy driver */
+ #cooling-cells = <2>;
};
};
@@ -182,7 +183,7 @@ thermal_zones: thermal-zones {
};
&ssi {
- status = "ok";
+ status = "okay";
clocks = <&ssi_ssr_fck>,
<&ssi_sst_fck>,
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 9c3beef..05fe5ed 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -25,6 +25,7 @@ cpu: cpu@0 {
vbb-supply = <&abb_mpu_iva>;
clock-latency = <300000>; /* From omap-cpufreq driver */
+ #cooling-cells = <2>;
};
};
@@ -234,7 +235,7 @@ &venc {
};
&ssi {
- status = "ok";
+ status = "okay";
clocks = <&ssi_ssr_fck>,
<&ssi_sst_fck>,
diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts
index 4548d87..b294c22 100644
--- a/arch/arm/boot/dts/omap4-duovero-parlor.dts
+++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts
@@ -171,11 +171,11 @@ ethernet@gpmc {
};
&dss {
- status = "ok";
+ status = "okay";
};
&hdmi {
- status = "ok";
+ status = "okay";
vdda-supply = <&vdac>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/omap4-l4-abe.dtsi b/arch/arm/boot/dts/omap4-l4-abe.dtsi
index b2cf5f4..a9573d4 100644
--- a/arch/arm/boot/dts/omap4-l4-abe.dtsi
+++ b/arch/arm/boot/dts/omap4-l4-abe.dtsi
@@ -1,14 +1,16 @@
&l4_abe { /* 0x40100000 */
- compatible = "ti,omap4-l4-abe", "simple-bus";
+ compatible = "ti,omap4-l4-abe", "simple-pm-bus";
reg = <0x40100000 0x400>,
<0x40100400 0x400>;
reg-names = "la", "ap";
+ power-domains = <&prm_abe>;
+ /* OMAP4_L4_ABE_CLKCTRL is read-only */
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */
<0x49000000 0x49000000 0x100000>;
segment@0 { /* 0x40100000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges =
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 3e78cae..609a8de 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -566,7 +566,7 @@ ethernet: usbether@1 {
};
&dss {
- status = "ok";
+ status = "okay";
port {
dpi_out: endpoint {
@@ -577,12 +577,12 @@ dpi_out: endpoint {
};
&dsi2 {
- status = "ok";
+ status = "okay";
vdd-supply = <&vcxio>;
};
&hdmi {
- status = "ok";
+ status = "okay";
vdda-supply = <&vdac>;
port {
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 79e7a41..afb49a2 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -648,11 +648,11 @@ &usb_otg_hs {
};
&dss {
- status = "ok";
+ status = "okay";
};
&dsi1 {
- status = "ok";
+ status = "okay";
vdd-supply = <&vcxio>;
port {
@@ -662,8 +662,9 @@ dsi1_out_ep: endpoint {
};
};
- lcd0: display {
+ lcd0: panel@0 {
compatible = "tpo,taal", "panel-dsi-cm";
+ reg = <0>;
label = "lcd0";
reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
@@ -677,7 +678,7 @@ lcd0_in: endpoint {
};
&dsi2 {
- status = "ok";
+ status = "okay";
vdd-supply = <&vcxio>;
port {
@@ -687,8 +688,9 @@ dsi2_out_ep: endpoint {
};
};
- lcd1: display {
+ lcd1: panel@0 {
compatible = "tpo,taal", "panel-dsi-cm";
+ reg = <0>;
label = "lcd1";
reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
@@ -702,7 +704,7 @@ lcd1_in: endpoint {
};
&hdmi {
- status = "ok";
+ status = "okay";
vdda-supply = <&vdac>;
port {
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 0282b9d..d6475cc 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -410,7 +410,7 @@ abb_iva: regulator-abb-iva {
status = "disabled";
};
- target-module@56000000 {
+ sgx_module: target-module@56000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x5600fe00 0x4>,
<0x5600fe10 0x4>;
@@ -572,6 +572,9 @@ dsi1: encoder@0 {
clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
<&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
clock-names = "fck", "sys_clk";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
};
};
@@ -604,6 +607,9 @@ dsi2: encoder@0 {
clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
<&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
clock-names = "fck", "sys_clk";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
};
};
@@ -658,6 +664,12 @@ prm_tesla: prm@400 {
#reset-cells = <1>;
};
+ prm_abe: prm@500 {
+ compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+ reg = <0x500 0x100>;
+ #power-domain-cells = <0>;
+ };
+
prm_core: prm@700 {
compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
reg = <0x700 0x100>;
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index 8ed510a..cb30974 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -74,3 +74,13 @@ &cpu_thermal {
};
/include/ "omap443x-clocks.dtsi"
+
+/*
+ * Use dpll_per for sgx at 153.6MHz like droid4 stock v3.0.8 Android kernel
+ */
+&sgx_module {
+ assigned-clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 24>,
+ <&dpll_per_m7x2_ck>;
+ assigned-clock-rates = <0>, <153600000>;
+ assigned-clock-parents = <&dpll_per_m7x2_ck>;
+};
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index edf1906..d8f1362 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -743,11 +743,11 @@ &cpu0 {
};
&dss {
- status = "ok";
+ status = "okay";
};
&hdmi {
- status = "ok";
+ status = "okay";
/* vdda-supply populated in board specific dts file */
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index e78d371..ca759b7 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -653,7 +653,7 @@ &cpu0 {
};
&dss {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_dpi_pins>;
@@ -677,12 +677,12 @@ dpi_lcd_out: endpoint@1 {
};
&dsi2 {
- status = "ok";
+ status = "okay";
vdd-supply = <&ldo4_reg>;
};
&hdmi {
- status = "ok";
+ status = "okay";
vdda-supply = <&ldo4_reg>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/omap5-l4-abe.dtsi b/arch/arm/boot/dts/omap5-l4-abe.dtsi
index 25b7fce..a03bca5 100644
--- a/arch/arm/boot/dts/omap5-l4-abe.dtsi
+++ b/arch/arm/boot/dts/omap5-l4-abe.dtsi
@@ -1,14 +1,16 @@
&l4_abe { /* 0x40100000 */
- compatible = "ti,omap5-l4-abe", "simple-bus";
+ compatible = "ti,omap5-l4-abe", "simple-pm-bus";
reg = <0x40100000 0x400>,
<0x40100400 0x400>;
reg-names = "la", "ap";
+ power-domains = <&prm_abe>;
+ /* OMAP5_L4_ABE_CLKCTRL is read-only */
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */
<0x49000000 0x49000000 0x100000>;
segment@0 { /* 0x40100000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges =
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index a82c962..2bf2e58 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -676,6 +676,12 @@ prm_dsp: prm@400 {
#reset-cells = <1>;
};
+ prm_abe: prm@500 {
+ compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+ reg = <0x500 0x100>;
+ #power-domain-cells = <0>;
+ };
+
prm_core: prm@700 {
compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
reg = <0x700 0x100>;
diff --git a/arch/arm/boot/dts/owl-s500-labrador-base-m.dts b/arch/arm/boot/dts/owl-s500-labrador-base-m.dts
new file mode 100644
index 0000000..c92f8bd
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500-labrador-base-m.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Caninos Labrador Base Board
+ *
+ * Copyright (c) 2019-2020 Matheus Castello
+ */
+
+/dts-v1/;
+
+#include "owl-s500-labrador-v2.dtsi"
+
+/ {
+ model = "Caninos Labrador Core v2 on Labrador Base-M v1";
+ compatible = "caninos,labrador-base-m",
+ "caninos,labrador-v2", "actions,s500";
+
+ aliases {
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial3:115200n8";
+ };
+
+ uart3_clk: uart3-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <921600>;
+ #clock-cells = <0>;
+ };
+};
+
+&uart3 {
+ status = "okay";
+ clocks = <&uart3_clk>;
+};
diff --git a/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
new file mode 100644
index 0000000..883ff2f
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Caninos Labrador SoM V2
+ *
+ * Copyright (c) 2019-2020 Matheus Castello
+ */
+
+#include "owl-s500.dtsi"
+
+/ {
+ model = "Caninos Labrador Core V2.1";
+ compatible = "caninos,labrador-v2", "actions,s500";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x80000000>;
+ };
+};
+
+&timer {
+ clocks = <&hosc>;
+};
diff --git a/arch/arm/boot/dts/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
new file mode 100644
index 0000000..a2087e6
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Roseapple Pi
+ *
+ * Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "owl-s500.dtsi"
+
+/ {
+ compatible = "roseapplepi,roseapplepi", "actions,s500";
+ model = "Roseapple Pi";
+
+ aliases {
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x80000000>; /* 2GB */
+ };
+
+ uart2_clk: uart2-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <921600>;
+ #clock-cells = <0>;
+ };
+};
+
+&twd_timer {
+ status = "okay";
+};
+
+&timer {
+ clocks = <&hosc>;
+};
+
+&uart2 {
+ status = "okay";
+ clocks = <&uart2_clk>;
+};
diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi
index 5ceb6cc..1dbe4e8 100644
--- a/arch/arm/boot/dts/owl-s500.dtsi
+++ b/arch/arm/boot/dts/owl-s500.dtsi
@@ -84,21 +84,21 @@ scu: scu@b0020000 {
global_timer: timer@b0020200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0xb0020200 0x100>;
- interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+ interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
status = "disabled";
};
twd_timer: timer@b0020600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xb0020600 0x20>;
- interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
status = "disabled";
};
twd_wdt: wdt@b0020620 {
compatible = "arm,cortex-a9-twd-wdt";
reg = <0xb0020620 0xe0>;
- interrupts = <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+ interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
index 5ae8607..c4c6c7e 100644
--- a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
+++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
@@ -160,7 +160,6 @@ gpio: gpio@20000 {
reg = <0x20000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
- reg-io-width = <4>;
banka: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-bank";
diff --git a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
index fa93155..0e85bb6 100644
--- a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
+++ b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
@@ -243,7 +243,6 @@ gpio: gpio@20000 {
reg = <0x20000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
- reg-io-width = <4>;
banka: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-bank";
diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts
index 4dfe0f1..c349fd3 100644
--- a/arch/arm/boot/dts/pm9g45.dts
+++ b/arch/arm/boot/dts/pm9g45.dts
@@ -15,7 +15,7 @@ chosen {
bootargs = "console=ttyS0,115200";
};
- memory {
+ memory@70000000 {
reg = <0x70000000 0x8000000>;
};
@@ -68,6 +68,7 @@ mmc0: mmc@fff80000 {
&pinctrl_board_mmc
&pinctrl_mmc0_slot0_clk_cmd_dat0
&pinctrl_mmc0_slot0_dat1_3>;
+ pinctrl-names = "default";
status = "okay";
slot@0 {
reg = <0>;
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
index 9c7b46b..7d3d93c 100644
--- a/arch/arm/boot/dts/prima2.dtsi
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -50,7 +50,7 @@ axi {
#size-cells = <1>;
ranges = <0x40000000 0x40000000 0x80000000>;
- l2-cache-controller@80040000 {
+ cache-controller@80040000 {
compatible = "arm,pl310-cache";
reg = <0x80040000 0x1000>;
interrupts = <59>;
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index 347b4f7..dda2cee 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -98,7 +98,7 @@ soc: soc {
ranges;
compatible = "simple-bus";
- L2: l2-cache@2040000 {
+ L2: cache-controller@2040000 {
compatible = "arm,pl310-cache";
reg = <0x02040000 0x1000>;
arm,data-latency = <2 2 0>;
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index b9b1388..45cf75b 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -499,7 +499,7 @@ R7S72100_CLK_SDHI10 R7S72100_CLK_SDHI11
clock-output-names = "sdhi00", "sdhi01", "sdhi10", "sdhi11";
};
- pinctrl: pin-controller@fcfe3000 {
+ pinctrl: pinctrl@fcfe3000 {
compatible = "renesas,r7s72100-ports";
reg = <0xfcfe3000 0x4230>;
diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi
index 838920a..85c0399 100644
--- a/arch/arm/boot/dts/r7s9210.dtsi
+++ b/arch/arm/boot/dts/r7s9210.dtsi
@@ -489,7 +489,7 @@ irqc: interrupt-controller@fcfef800 {
interrupt-map-mask = <7 0>;
};
- pinctrl: pin-controller@fcffe000 {
+ pinctrl: pinctrl@fcffe000 {
compatible = "renesas,r7s9210-pinctrl";
reg = <0xfcffe000 0x1000>;
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index b92e725..e5fb1ce 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -221,7 +221,7 @@ irqc1: interrupt-controller@e61c0200 {
power-domains = <&pd_c4>;
};
- pfc: pin-controller@e6050000 {
+ pfc: pinctrl@e6050000 {
compatible = "renesas,pfc-r8a73a4";
reg = <0 0xe6050000 0 0x9000>;
gpio-controller;
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 8048303..1b2cf5f 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -311,7 +311,7 @@ scifb: serial@e6c30000 {
status = "disabled";
};
- pfc: pin-controller@e6050000 {
+ pfc: pinctrl@e6050000 {
compatible = "renesas,pfc-r8a7740";
reg = <0xe6050000 0x8000>,
<0xe605800c 0x20>;
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
index 1479ced..961c0f2 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -27,6 +27,12 @@ &avb {
status = "disabled";
};
+&can0 {
+ pinctrl-0 = <&can0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
ðer {
pinctrl-0 = <ðer_pins>;
pinctrl-names = "default";
@@ -49,6 +55,11 @@ &hscif0 {
};
&pfc {
+ can0_pins: can0 {
+ groups = "can0_data_d";
+ function = "can0";
+ };
+
ether_pins: ether {
groups = "eth_mdio", "eth_rmii";
function = "eth";
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index e90aaf1c..c2c05c9 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -52,6 +52,16 @@ audio_clock: audio_clock {
clock-frequency = <26000000>;
};
+ leds {
+ compatible = "gpio-leds";
+
+ sdhi2_led {
+ label = "sdio-led";
+ gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ };
+ };
+
reg_1p5v: 1p5v {
compatible = "regulator-fixed";
regulator-name = "1P5V";
@@ -131,17 +141,109 @@ sgtl5000: codec@a {
};
};
+&can1 {
+ pinctrl-0 = <&can1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&cmt0 {
+ status = "okay";
+};
+
+&gpio1 {
+ can-trx-en-gpio{
+ gpio-hog;
+ gpios = <28 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "can-trx-en-gpio";
+ };
+};
+
+&hsusb {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&msiof0 {
+ pinctrl-0 = <&msiof0_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+
+ flash1: flash@0 {
+ compatible = "sst,sst25vf016b", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "user";
+ reg = <0x00000000 0x00200000>;
+ };
+ };
+ };
+};
+
+&pci0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+ /* Disable hsusb to enable USB2.0 host mode support on J2 */
+ /* status = "okay"; */
+};
+
+&pci1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&pci2 {
+ /* Disable xhci to enable USB2.0 host mode support on J23 bottom port */
+ /* status = "okay"; */
+};
+
+&pcie_bus_clk {
+ clock-frequency = <100000000>;
+};
+
+&pciec {
+ /* SW2[6] determines which connector is activated
+ * ON = PCIe X4 (connector-J7)
+ * OFF = mini-PCIe (connector-J26)
+ */
+ status = "okay";
+};
+
&pfc {
avb_pins: avb {
groups = "avb_mdio", "avb_gmii";
function = "avb";
};
+ can1_pins: can1 {
+ groups = "can1_data_b";
+ function = "can1";
+ };
+
i2c2_pins: i2c2 {
groups = "i2c2_b";
function = "i2c2";
};
+ msiof0_pins: msiof0 {
+ groups = "msiof0_clk", "msiof0_sync", "msiof0_tx", "msiof0_rx";
+ function = "msiof0";
+ };
+
scifa2_pins: scifa2 {
groups = "scifa2_data_c";
function = "scifa2";
@@ -168,6 +270,16 @@ sound_pins: sound {
groups = "ssi34_ctrl", "ssi3_data", "ssi4_data";
function = "ssi";
};
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ groups = "usb1_pwen";
+ function = "usb1";
+ };
};
&rcar_sound {
@@ -222,3 +334,11 @@ &sdhi2 {
&ssi4 {
shared-pin;
};
+
+&usbphy {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
index 85aff42..5621c9e 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
+++ b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
@@ -35,10 +35,28 @@ &extal_clk {
clock-frequency = <20000000>;
};
-&pfc {
- mmc1_pins: mmc1 {
- groups = "mmc1_data4", "mmc1_ctrl";
- function = "mmc1";
+&gpio0 {
+ /* GP0_18 set low to select QSPI. Doing so will disable VIN2 */
+ qspi_en {
+ gpio-hog;
+ gpios = <18 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "QSPI_EN";
+ };
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ rtc@68 {
+ compatible = "ti,bq32000";
+ reg = <0x68>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
};
};
@@ -51,3 +69,56 @@ &mmcif1 {
non-removable;
status = "okay";
};
+
+&pfc {
+ i2c0_pins: i2c0 {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+
+ mmc1_pins: mmc1 {
+ groups = "mmc1_data4", "mmc1_ctrl";
+ function = "mmc1";
+ };
+
+ qspi_pins: qspi {
+ groups = "qspi_ctrl", "qspi_data2";
+ function = "qspi";
+ };
+};
+
+&qspi {
+ pinctrl-0 = <&qspi_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ flash: flash@0 {
+ compatible = "sst,sst25vf016b", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+ spi-cpol;
+ spi-cpha;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x00000000 0x000c0000>;
+ read-only;
+ };
+ partition@c0000 {
+ label = "env";
+ reg = <0x000c0000 0x00002000>;
+ };
+ partition@c2000 {
+ label = "user";
+ reg = <0x000c2000 0x0013e000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi
index 0240d01..6a78c813 100644
--- a/arch/arm/boot/dts/r8a7742.dtsi
+++ b/arch/arm/boot/dts/r8a7742.dtsi
@@ -36,6 +36,14 @@ audio_clk_c: audio_clk_c {
clock-frequency = <0>;
};
+ /* External CAN clock */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -188,6 +196,13 @@ extal_clk: extal {
clock-frequency = <0>;
};
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
pmu-0 {
compatible = "arm,cortex-a15-pmu";
interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
@@ -323,11 +338,22 @@ gpio5: gpio@e6055000 {
resets = <&cpg 907>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a7742";
reg = <0 0xe6060000 0 0x250>;
};
+ tpu: pwm@e60f0000 {
+ compatible = "renesas,tpu-r8a7742", "renesas,tpu";
+ reg = <0 0xe60f0000 0 0x148>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 304>;
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 304>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a7742-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
@@ -731,6 +757,22 @@ avb: ethernet@e6800000 {
status = "disabled";
};
+ qspi: spi@e6b10000 {
+ compatible = "renesas,qspi-r8a7742", "renesas,qspi";
+ reg = <0 0xe6b10000 0 0x2c>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+ <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
scifa0: serial@e6c40000 {
compatible = "renesas,scifa-r8a7742",
"renesas,rcar-gen2-scifa", "renesas,scifa";
@@ -965,6 +1007,146 @@ msiof3: spi@e6c90000 {
status = "disabled";
};
+ can0: can@e6e80000 {
+ compatible = "renesas,can-r8a7742",
+ "renesas,rcar-gen2-can";
+ reg = <0 0xe6e80000 0 0x1000>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 916>,
+ <&cpg CPG_CORE R8A7742_CLK_RCAN>, <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
+ status = "disabled";
+ };
+
+ can1: can@e6e88000 {
+ compatible = "renesas,can-r8a7742",
+ "renesas,rcar-gen2-can";
+ reg = <0 0xe6e88000 0 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 915>,
+ <&cpg CPG_CORE R8A7742_CLK_RCAN>, <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@e6e35000 {
+ compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
+ reg = <0 0xe6e35000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@e6e36000 {
+ compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
+ reg = <0 0xe6e36000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ vin0: video@e6ef0000 {
+ compatible = "renesas,vin-r8a7742",
+ "renesas,rcar-gen2-vin";
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 811>;
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 811>;
+ status = "disabled";
+ };
+
+ vin1: video@e6ef1000 {
+ compatible = "renesas,vin-r8a7742",
+ "renesas,rcar-gen2-vin";
+ reg = <0 0xe6ef1000 0 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 810>;
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 810>;
+ status = "disabled";
+ };
+
+ vin2: video@e6ef2000 {
+ compatible = "renesas,vin-r8a7742",
+ "renesas,rcar-gen2-vin";
+ reg = <0 0xe6ef2000 0 0x1000>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 809>;
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 809>;
+ status = "disabled";
+ };
+
+ vin3: video@e6ef3000 {
+ compatible = "renesas,vin-r8a7742",
+ "renesas,rcar-gen2-vin";
+ reg = <0 0xe6ef3000 0 0x1000>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 808>;
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 808>;
+ status = "disabled";
+ };
+
rcar_sound: sound@ec500000 {
/*
* #sound-dai-cells is required
@@ -1476,6 +1658,159 @@ gic: interrupt-controller@f1001000 {
resets = <&cpg 408>;
};
+ pciec: pcie@fe000000 {
+ compatible = "renesas,pcie-r8a7742",
+ "renesas,pcie-rcar-gen2";
+ reg = <0 0xfe000000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+ <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ /* Map all possible DDR as inbound ranges */
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+ <0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
+ status = "disabled";
+ };
+
+ vsp@fe920000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe920000 0 0x8000>;
+ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 130>;
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 130>;
+ };
+
+ vsp@fe928000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe928000 0 0x8000>;
+ interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 131>;
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 131>;
+ };
+
+ vsp@fe930000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe930000 0 0x8000>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 128>;
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 128>;
+ };
+
+ vsp@fe938000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe938000 0 0x8000>;
+ interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 127>;
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 127>;
+ };
+
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a7742";
+ reg = <0 0xfeb00000 0 0x70000>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>;
+ clock-names = "du.0", "du.1", "du.2";
+ resets = <&cpg 724>;
+ reset-names = "du.0";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+ port@1 {
+ reg = <1>;
+ du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ du_out_lvds1: endpoint {
+ remote-endpoint = <&lvds1_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a7742-lvds";
+ reg = <0 0xfeb90000 0 0x14>;
+ clocks = <&cpg CPG_MOD 726>;
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 726>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ lvds1: lvds@feb94000 {
+ compatible = "renesas,r8a7742-lvds";
+ reg = <0 0xfeb94000 0 0x14>;
+ clocks = <&cpg CPG_MOD 725>;
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 725>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds1_in: endpoint {
+ remote-endpoint = <&du_out_lvds1>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds1_out: endpoint {
+ };
+ };
+ };
+ };
+
prr: chipid@ff000044 {
compatible = "renesas,prr";
reg = <0 0xff000044 0 4>;
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 896916a..f444e41 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -265,7 +265,7 @@ gpio7: gpio@e6055800 {
resets = <&cpg 904>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a7743";
reg = <0 0xe6060000 0 0x250>;
};
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 6b56aa2..0442aad4 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -265,7 +265,7 @@ gpio7: gpio@e6055800 {
resets = <&cpg 904>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a7744";
reg = <0 0xe6060000 0 0x250>;
};
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
index b15b1b0..1c7b37a 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
@@ -53,42 +53,6 @@ audio_clock: audio_clock {
clock-frequency = <26000000>;
};
- rsnd_sgtl5000: sound {
- compatible = "simple-audio-card";
- simple-audio-card,format = "i2s";
- simple-audio-card,bitclock-master = <&sndcodec>;
- simple-audio-card,frame-master = <&sndcodec>;
-
- sndcpu: simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
-
- sndcodec: simple-audio-card,codec {
- sound-dai = <&sgtl5000>;
- };
- };
-
- vccq_sdhi0: regulator-vccq-sdhi0 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- gpios-states = <1>;
- states = <3300000 1>, <1800000 0>;
- };
-
- vccq_panel: regulator-vccq-panel {
- compatible = "regulator-fixed";
- regulator-name = "Panel VccQ";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
- enable-active-high;
- };
-
backlight_lcd: backlight {
compatible = "pwm-backlight";
pwms = <&tpu 3 5000000 PWM_POLARITY_INVERTED>;
@@ -107,19 +71,40 @@ lcd_in: endpoint {
};
};
};
-};
-&du {
- pinctrl-0 = <&du0_pins>;
- pinctrl-names = "default";
+ vccq_panel: regulator-vccq-panel {
+ compatible = "regulator-fixed";
+ regulator-name = "Panel VccQ";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ enable-active-high;
+ };
- status = "okay";
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
- ports {
- port@0 {
- endpoint {
- remote-endpoint = <&lcd_in>;
- };
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ gpios-states = <1>;
+ states = <3300000 1>, <1800000 0>;
+ };
+
+ rsnd_sgtl5000: sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sndcodec>;
+ simple-audio-card,frame-master = <&sndcodec>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
};
};
};
@@ -150,6 +135,21 @@ &can0 {
status = "okay";
};
+&du {
+ pinctrl-0 = <&du0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&lcd_in>;
+ };
+ };
+ };
+};
+
&hscif1 {
pinctrl-0 = <&hscif1_pins>;
pinctrl-names = "default";
@@ -171,6 +171,15 @@ &i2c5 {
status = "okay";
clock-frequency = <400000>;
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ #sound-dai-cells = <0>;
+ reg = <0x0a>;
+ clocks = <&audio_clock>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+
stmpe811@44 {
compatible = "st,stmpe811";
reg = <0x44>;
@@ -179,7 +188,7 @@ stmpe811@44 {
/* 3.25 MHz ADC clock speed */
st,adc-freq = <1>;
- /* ADC converstion time: 80 clocks */
+ /* ADC conversion time: 80 clocks */
st,sample-time = <4>;
/* 12-bit ADC */
st,mod-12b = <1>;
@@ -203,15 +212,6 @@ stmpe_touchscreen {
st,touch-det-delay = <5>;
};
};
-
- sgtl5000: codec@a {
- compatible = "fsl,sgtl5000";
- #sound-dai-cells = <0>;
- reg = <0x0a>;
- clocks = <&audio_clock>;
- VDDA-supply = <®_3p3v>;
- VDDIO-supply = <®_3p3v>;
- };
};
&pci1 {
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 636248f..0f14ac2 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -230,7 +230,7 @@ gpio6: gpio@e6055400 {
resets = <&cpg 905>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a7745";
reg = <0 0xe6060000 0 0x11c>;
};
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 6baa126..691b1a1 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -187,7 +187,7 @@ gpio5: gpio@e6055000 {
resets = <&cpg 907>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a77470";
reg = <0 0xe6060000 0 0x118>;
};
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 1612b00..c9f87358 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -142,7 +142,7 @@ gpio4: gpio@ffc44000 {
interrupt-controller;
};
- pfc: pin-controller@fffc0000 {
+ pfc: pinctrl@fffc0000 {
compatible = "renesas,pfc-r8a7778";
reg = <0xfffc0000 0x118>;
};
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index c5634da..74d7e90 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -321,7 +321,7 @@ hscif1: serial@ffe49000 {
status = "disabled";
};
- pfc: pin-controller@fffc0000 {
+ pfc: pinctrl@fffc0000 {
compatible = "renesas,pfc-r8a7779";
reg = <0xfffc0000 0x23c>;
};
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 769ba2a..b0569b4 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -363,7 +363,7 @@ gpio5: gpio@e6055000 {
resets = <&cpg 907>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a7790";
reg = <0 0xe6060000 0 0x250>;
};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 499cf38..87f0d6d 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -286,7 +286,7 @@ gpio7: gpio@e6055800 {
resets = <&cpg 904>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a7791";
reg = <0 0xe6060000 0 0x250>;
};
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 597848a..f5b299b 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -296,7 +296,7 @@ gpio11: gpio@e6055600 {
resets = <&cpg 913>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a7792";
reg = <0 0xe6060000 0 0x144>;
};
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 6d50709..f930f69 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -271,7 +271,7 @@ gpio7: gpio@e6055800 {
resets = <&cpg 904>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a7793";
reg = <0 0xe6060000 0 0x250>;
};
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 5f34039..cd5e290 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -238,7 +238,7 @@ gpio6: gpio@e6055400 {
resets = <&cpg 905>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a7794";
reg = <0 0xe6060000 0 0x11c>;
};
diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
index ee59cc8..c47896e 100644
--- a/arch/arm/boot/dts/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/r9a06g032.dtsi
@@ -165,7 +165,7 @@ uart7: serial@50004000 {
status = "disabled";
};
- pinctrl: pin-controller@40067000 {
+ pinctrl: pinctrl@40067000 {
compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
reg = <0x40067000 0x1000>, <0x51000000 0x480>;
clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>;
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index 0a56a2f..eba7a13 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -63,7 +63,11 @@ volume-down {
};
&cpu0 {
- cpu0-supply = <&vdd_arm>;
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
};
&i2c1 {
diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts
index 7e01f64..6b12165 100644
--- a/arch/arm/boot/dts/rk3066a-marsboard.dts
+++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
@@ -47,7 +47,11 @@ vsys: vsys-regulator {
};
&cpu0 {
- cpu0-supply = <&vdd_arm>;
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
};
&i2c1 {
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index f9db6bb..3095184 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -128,7 +128,11 @@ vcc_otg: usb-otg-regulator {
};
&cpu0 {
- cpu0-supply = <&vdd_arm>;
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
};
&emac {
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index b599394..252750c 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -36,7 +36,7 @@ cpu0: cpu@0 {
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 018802d..c4ca73b 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -247,7 +247,7 @@ &gmac {
pinctrl-0 = <&rgmii_pins>;
tx_delay = <0x30>;
rx_delay = <0x10>;
- status = "ok";
+ status = "okay";
};
&gpu {
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
index 61435d8..36efa36 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
@@ -61,7 +61,7 @@ &gmac {
snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
- status = "ok";
+ status = "okay";
};
&i2c0 {
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index e5c4fd4..7fb5823 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -191,7 +191,7 @@ &gmac {
snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
- status = "ok";
+ status = "okay";
};
&gpu {
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index 213c9eb..cf54d5f 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -81,7 +81,19 @@ vcc_sys: vsys-regulator {
};
&cpu0 {
- cpu0-supply = <&vdd_cpu>;
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
};
&emmc {
@@ -108,7 +120,7 @@ &gmac {
snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
- status = "ok";
+ status = "okay";
};
&hdmi {
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index 6a51940..8c7376d 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -103,7 +103,19 @@ vcc28_dvp: vcc28-dvp-regulator {
};
&cpu0 {
- cpu0-supply = <&vdd_cpu>;
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
};
&emmc {
@@ -149,7 +161,7 @@ &gmac {
pinctrl-0 = <&rgmii_pins>;
tx_delay = <0x30>;
rx_delay = <0x10>;
- status = "ok";
+ status = "okay";
};
&hdmi {
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index a258c7a..55467bc 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -91,7 +91,19 @@ vcc_sys: sys-regulator {
};
&cpu0 {
- cpu0-supply = <&vdd_cpu>;
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
};
&gmac {
@@ -107,7 +119,7 @@ &gmac {
pinctrl-0 = <&rgmii_pins>;
tx_delay = <0x30>;
rx_delay = <0x10>;
- status = "ok";
+ status = "okay";
};
&hdmi {
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index 3cca4d0..c4d1d142 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -156,7 +156,7 @@ &sdmmc {
};
&gmac {
- status = "ok";
+ status = "okay";
};
&hdmi {
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index 90e9be4..9c1e38c 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -137,7 +137,7 @@ &gmac {
snps,reset-delays-us = <0 10000 1000000>;
tx_delay = <0x30>;
rx_delay = <0x10>;
- status = "ok";
+ status = "okay";
};
&gpu {
diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index 1a20854..aa50f8e 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -125,7 +125,19 @@ ext_gmac: external-gmac-clock {
};
&cpu0 {
- cpu0-supply = <&vdd_cpu>;
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
};
&emmc {
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
index 811bfde..47626ed 100644
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -17,18 +17,11 @@ memory@30000000 {
reg = <0x30000000 0x4000000>;
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- xti: xti@0 {
- compatible = "fixed-clock";
- reg = <0>;
- clock-frequency = <12000000>;
- clock-output-names = "xti";
- #clock-cells = <0>;
- };
+ xti: clock-0 {
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ clock-output-names = "xti";
+ #clock-cells = <0>;
};
};
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index 6adf64e..4f084f4f 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -18,13 +18,14 @@ aliases {
};
cpus {
- cpu {
- compatible = "arm,arm926ej-s";
- };
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
- interrupt-controller@4a000000 {
- compatible = "samsung,s3c2416-irq";
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,arm926ej-s";
+ reg = <0x0>;
+ };
};
clocks: clock-controller@4c000000 {
@@ -33,39 +34,6 @@ clocks: clock-controller@4c000000 {
#clock-cells = <1>;
};
- pinctrl@56000000 {
- compatible = "samsung,s3c2416-pinctrl";
- };
-
- timer@51000000 {
- clocks = <&clocks PCLK_PWM>;
- clock-names = "timers";
- };
-
- uart_0: serial@50000000 {
- compatible = "samsung,s3c2440-uart";
- clock-names = "uart", "clk_uart_baud2",
- "clk_uart_baud3";
- clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
- <&clocks SCLK_UART>;
- };
-
- uart_1: serial@50004000 {
- compatible = "samsung,s3c2440-uart";
- clock-names = "uart", "clk_uart_baud2",
- "clk_uart_baud3";
- clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
- <&clocks SCLK_UART>;
- };
-
- uart_2: serial@50008000 {
- compatible = "samsung,s3c2440-uart";
- clock-names = "uart", "clk_uart_baud2",
- "clk_uart_baud3";
- clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
- <&clocks SCLK_UART>;
- };
-
uart_3: serial@5000c000 {
compatible = "samsung,s3c2440-uart";
reg = <0x5000C000 0x4000>;
@@ -98,22 +66,59 @@ sdhci_0: sdhci@4a800000 {
<&clocks MUX_HSMMC1>;
status = "disabled";
};
+};
- watchdog: watchdog@53000000 {
- interrupts = <1 9 27 3>;
- clocks = <&clocks PCLK_WDT>;
- clock-names = "watchdog";
- };
+&i2c {
+ compatible = "samsung,s3c2440-i2c";
+ clocks = <&clocks PCLK_I2C0>;
+ clock-names = "i2c";
+};
- rtc: rtc@57000000 {
- compatible = "samsung,s3c2416-rtc";
- clocks = <&clocks PCLK_RTC>;
- clock-names = "rtc";
- };
+&intc {
+ compatible = "samsung,s3c2416-irq";
+};
- i2c@54000000 {
- compatible = "samsung,s3c2440-i2c";
- clocks = <&clocks PCLK_I2C0>;
- clock-names = "i2c";
- };
+&pinctrl_0 {
+ compatible = "samsung,s3c2416-pinctrl";
+};
+
+&rtc {
+ compatible = "samsung,s3c2416-rtc";
+ clocks = <&clocks PCLK_RTC>;
+ clock-names = "rtc";
+};
+
+&timer {
+ clocks = <&clocks PCLK_PWM>;
+ clock-names = "timers";
+};
+
+&uart_0 {
+ compatible = "samsung,s3c2440-uart";
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+ <&clocks SCLK_UART>;
+};
+
+&uart_1 {
+ compatible = "samsung,s3c2440-uart";
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+ <&clocks SCLK_UART>;
+};
+
+&uart_2 {
+ compatible = "samsung,s3c2440-uart";
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
+ <&clocks SCLK_UART>;
+};
+
+&watchdog {
+ interrupts = <1 9 27 3>;
+ clocks = <&clocks PCLK_WDT>;
+ clock-names = "watchdog";
};
diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi
index 6d8dd3c..06f82c7 100644
--- a/arch/arm/boot/dts/s3c24xx.dtsi
+++ b/arch/arm/boot/dts/s3c24xx.dtsi
@@ -13,12 +13,12 @@ / {
aliases {
pinctrl0 = &pinctrl_0;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
+ serial0 = &uart_0;
+ serial1 = &uart_1;
+ serial2 = &uart_2;
};
- intc:interrupt-controller@4a000000 {
+ intc: interrupt-controller@4a000000 {
compatible = "samsung,s3c2410-irq";
reg = <0x4a000000 0x100>;
interrupt-controller;
@@ -39,49 +39,49 @@ wakeup-interrupt-controller {
};
};
- timer@51000000 {
+ timer: pwm@51000000 {
compatible = "samsung,s3c2410-pwm";
reg = <0x51000000 0x1000>;
interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>;
- #pwm-cells = <4>;
+ #pwm-cells = <3>;
};
- uart0: serial@50000000 {
+ uart_0: serial@50000000 {
compatible = "samsung,s3c2410-uart";
reg = <0x50000000 0x4000>;
interrupts = <1 28 0 4>, <1 28 1 4>;
status = "disabled";
};
- uart1: serial@50004000 {
+ uart_1: serial@50004000 {
compatible = "samsung,s3c2410-uart";
reg = <0x50004000 0x4000>;
interrupts = <1 23 3 4>, <1 23 4 4>;
status = "disabled";
};
- uart2: serial@50008000 {
+ uart_2: serial@50008000 {
compatible = "samsung,s3c2410-uart";
reg = <0x50008000 0x4000>;
interrupts = <1 15 6 4>, <1 15 7 4>;
status = "disabled";
};
- watchdog@53000000 {
+ watchdog: watchdog@53000000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x53000000 0x100>;
interrupts = <0 0 9 3>;
status = "disabled";
};
- rtc@57000000 {
+ rtc: rtc@57000000 {
compatible = "samsung,s3c2410-rtc";
reg = <0x57000000 0x100>;
interrupts = <0 0 30 3>, <0 0 8 3>;
status = "disabled";
};
- i2c@54000000 {
+ i2c: i2c@54000000 {
compatible = "samsung,s3c2410-i2c";
reg = <0x54000000 0x100>;
interrupts = <0 0 27 3>;
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
index 1aeac33..285555b 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -28,29 +28,21 @@ chosen {
bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- fin_pll: oscillator@0 {
- compatible = "fixed-clock";
- reg = <0>;
- clock-frequency = <12000000>;
- clock-output-names = "fin_pll";
- #clock-cells = <0>;
- };
-
- xusbxti: oscillator@1 {
- compatible = "fixed-clock";
- reg = <1>;
- clock-output-names = "xusbxti";
- clock-frequency = <48000000>;
- #clock-cells = <0>;
- };
+ fin_pll: oscillator-0 {
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ clock-output-names = "fin_pll";
+ #clock-cells = <0>;
};
- srom-cs1@18000000 {
+ xusbxti: oscillator-1 {
+ compatible = "fixed-clock";
+ clock-output-names = "xusbxti";
+ clock-frequency = <48000000>;
+ #clock-cells = <0>;
+ };
+
+ srom-cs1-bus@18000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts
index 96267f5..69c9ec4 100644
--- a/arch/arm/boot/dts/s3c6410-smdk6410.dts
+++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts
@@ -28,29 +28,21 @@ chosen {
bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- fin_pll: oscillator@0 {
- compatible = "fixed-clock";
- reg = <0>;
- clock-frequency = <12000000>;
- clock-output-names = "fin_pll";
- #clock-cells = <0>;
- };
-
- xusbxti: oscillator@1 {
- compatible = "fixed-clock";
- reg = <1>;
- clock-output-names = "xusbxti";
- clock-frequency = <48000000>;
- #clock-cells = <0>;
- };
+ fin_pll: oscillator-0 {
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ clock-output-names = "fin_pll";
+ #clock-cells = <0>;
};
- srom-cs1@18000000 {
+ xusbxti: oscillator-1 {
+ compatible = "fixed-clock";
+ clock-output-names = "xusbxti";
+ clock-frequency = <48000000>;
+ #clock-cells = <0>;
+ };
+
+ srom-cs1-bus@18000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi
index 2e611df..cb11a87 100644
--- a/arch/arm/boot/dts/s3c64xx.dtsi
+++ b/arch/arm/boot/dts/s3c64xx.dtsi
@@ -34,7 +34,7 @@ cpus {
cpu@0 {
device_type = "cpu";
- compatible = "arm,arm1176jzf-s", "arm,arm1176";
+ compatible = "arm,arm1176jzf-s";
reg = <0x0>;
};
};
diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts
index 14969b6..8e57e5a 100644
--- a/arch/arm/boot/dts/s5pv210-aquila.dts
+++ b/arch/arm/boot/dts/s5pv210-aquila.dts
@@ -11,6 +11,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "s5pv210.dtsi"
@@ -32,42 +33,40 @@ memory@30000000 {
0x40000000 0x18000000>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ pmic_ap_clk: clock-0 {
+ /* Workaround for missing clock on PMIC */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
- vtf_reg: fixed-regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "V_TF_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&mp05 4 0>;
- enable-active-high;
- };
+ vtf_reg: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_TF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&mp05 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- pda_reg: fixed-regulator@1 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_1.8V_PDA";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- reg = <1>;
- };
+ pda_reg: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1.8V_PDA";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- bat_reg: fixed-regulator@2 {
- compatible = "regulator-fixed";
- regulator-name = "V_BAT";
- regulator-min-microvolt = <3700000>;
- regulator-max-microvolt = <3700000>;
- reg = <2>;
- };
+ bat_reg: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_BAT";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
};
i2c_pmic: i2c-pmic {
compatible = "i2c-gpio";
- gpios = <&gpj4 0 0>, /* sda */
- <&gpj4 3 0>; /* scl */
+ sda-gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpj4 3 GPIO_ACTIVE_HIGH>;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
@@ -77,13 +76,13 @@ pmic@66 {
reg = <0x66>;
max8998,pmic-buck1-default-dvs-idx = <0>;
- max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
- <&gph0 4 0>;
+ max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>,
+ <&gph0 4 GPIO_ACTIVE_HIGH>;
max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
<1200000>, <1200000>;
max8998,pmic-buck2-default-dvs-idx = <0>;
- max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
+ max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
regulators {
@@ -228,6 +227,11 @@ buck4_reg: BUCK4 {
regulator-always-on;
};
+ ap32khz_reg: EN32KHz-AP {
+ regulator-name = "32KHz AP";
+ regulator-always-on;
+ };
+
vichg_reg: ENVICHG {
regulator-name = "VICHG";
};
@@ -326,6 +330,11 @@ &uart3 {
status = "okay";
};
+&rtc {
+ clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
+ clock-names = "rtc", "rtc_src";
+};
+
&sdhci0 {
bus-width = <4>;
non-removable;
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 822207f..bd4450d 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -47,6 +47,18 @@ mfc_right: region@51000000 {
};
};
+ pmic_ap_clk: clock-0 {
+ /* Workaround for missing clock on PMIC */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ bt_codec: bt_sco {
+ compatible = "linux,bt-sco";
+ #sound-dai-cells = <0>;
+ };
+
vibrator_pwr: regulator-fixed-0 {
compatible = "regulator-fixed";
regulator-name = "vibrator-en";
@@ -54,7 +66,7 @@ vibrator_pwr: regulator-fixed-0 {
gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctr-0 = <&vibrator_ena>;
+ pinctrl-0 = <&vibrator_ena>;
};
touchkey_vdd: regulator-fixed-1 {
@@ -533,7 +545,7 @@ poweroff: syscon-poweroff {
value = <0x5200>;
};
- spi_lcd: spi-gpio-0 {
+ spi_lcd: spi-2 {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
@@ -624,6 +636,11 @@ touchscreen@4a {
};
};
+&i2s0 {
+ dmas = <&pdma0 9>, <&pdma0 10>, <&pdma0 11>;
+ status = "okay";
+};
+
&mfc {
memory-region = <&mfc_left>, <&mfc_right>;
};
@@ -815,6 +832,11 @@ &pwm {
samsung,pwm-outputs = <1>;
};
+&rtc {
+ clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
+ clock-names = "rtc", "rtc_src";
+};
+
&sdhci1 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
index 65eed01c..ca06435 100644
--- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts
+++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -35,6 +35,80 @@ vol-up {
linux,code = <KEY_VOLUMEUP>;
};
};
+
+ headset_micbias_reg: regulator-fixed-3 {
+ compatible = "regulator-fixed";
+ regulator-name = "Headset_Micbias";
+ gpio = <&gpj2 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&headset_micbias_ena>;
+ };
+
+ main_micbias_reg: regulator-fixed-4 {
+ compatible = "regulator-fixed";
+ regulator-name = "Main_Micbias";
+ gpio = <&gpj4 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_micbias_ena>;
+ };
+
+ sound {
+ compatible = "samsung,fascinate4g-wm8994";
+
+ model = "Fascinate4G";
+
+ extcon = <&fsa9480>;
+
+ main-micbias-supply = <&main_micbias_reg>;
+ headset-micbias-supply = <&headset_micbias_reg>;
+
+ earpath-sel-gpios = <&gpj2 6 GPIO_ACTIVE_HIGH>;
+
+ io-channels = <&adc 3>;
+ io-channel-names = "headset-detect";
+ headset-detect-gpios = <&gph0 6 GPIO_ACTIVE_HIGH>;
+ headset-key-gpios = <&gph3 6 GPIO_ACTIVE_HIGH>;
+
+ samsung,audio-routing =
+ "HP", "HPOUT1L",
+ "HP", "HPOUT1R",
+
+ "SPK", "SPKOUTLN",
+ "SPK", "SPKOUTLP",
+
+ "RCV", "HPOUT2N",
+ "RCV", "HPOUT2P",
+
+ "LINE", "LINEOUT2N",
+ "LINE", "LINEOUT2P",
+
+ "IN1LP", "Main Mic",
+ "IN1LN", "Main Mic",
+
+ "IN1RP", "Headset Mic",
+ "IN1RN", "Headset Mic",
+
+ "Modem Out", "Modem TX",
+ "Modem RX", "Modem In",
+
+ "Bluetooth SPK", "TX",
+ "RX", "Bluetooth Mic";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&headset_det &earpath_sel>;
+
+ cpu {
+ sound-dai = <&i2s0>, <&bt_codec>;
+ };
+
+ codec {
+ sound-dai = <&wm8994>;
+ };
+ };
};
&fg {
@@ -51,6 +125,12 @@ &pinctrl0 {
pinctrl-names = "default";
pinctrl-0 = <&sleep_cfg>;
+ headset_det: headset-det {
+ samsung,pins = "gph0-6", "gph3-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ };
+
fg_irq: fg-irq {
samsung,pins = "gph3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
@@ -58,6 +138,24 @@ fg_irq: fg-irq {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
+ headset_micbias_ena: headset-micbias-ena {
+ samsung,pins = "gpj2-5";
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
+ earpath_sel: earpath-sel {
+ samsung,pins = "gpj2-6";
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
+ main_micbias_ena: main-micbias-ena {
+ samsung,pins = "gpj4-2";
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
/* Based on vendor kernel v2.6.35.7 */
sleep_cfg: sleep-cfg {
PIN_SLP(gpa0-0, PREV, NONE);
diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts
index 5d10dd6..560f830 100644
--- a/arch/arm/boot/dts/s5pv210-galaxys.dts
+++ b/arch/arm/boot/dts/s5pv210-galaxys.dts
@@ -72,6 +72,73 @@ fmradio@10 {
pinctrl-0 = <&fm_irq &fm_rst>;
};
};
+
+ micbias_reg: regulator-fixed-3 {
+ compatible = "regulator-fixed";
+ regulator-name = "MICBIAS";
+ gpio = <&gpj4 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&micbias_reg_ena>;
+ };
+
+ sound {
+ compatible = "samsung,aries-wm8994";
+
+ model = "Aries";
+
+ extcon = <&fsa9480>;
+
+ main-micbias-supply = <&micbias_reg>;
+ headset-micbias-supply = <&micbias_reg>;
+
+ earpath-sel-gpios = <&gpj2 6 GPIO_ACTIVE_HIGH>;
+
+ io-channels = <&adc 3>;
+ io-channel-names = "headset-detect";
+ headset-detect-gpios = <&gph0 6 GPIO_ACTIVE_LOW>;
+ headset-key-gpios = <&gph3 6 GPIO_ACTIVE_HIGH>;
+
+ samsung,audio-routing =
+ "HP", "HPOUT1L",
+ "HP", "HPOUT1R",
+
+ "SPK", "SPKOUTLN",
+ "SPK", "SPKOUTLP",
+
+ "RCV", "HPOUT2N",
+ "RCV", "HPOUT2P",
+
+ "LINE", "LINEOUT2N",
+ "LINE", "LINEOUT2P",
+
+ "IN1LP", "Main Mic",
+ "IN1LN", "Main Mic",
+
+ "IN1RP", "Headset Mic",
+ "IN1RN", "Headset Mic",
+
+ "IN2LN", "FM In",
+ "IN2RN", "FM In",
+
+ "Modem Out", "Modem TX",
+ "Modem RX", "Modem In",
+
+ "Bluetooth SPK", "TX",
+ "RX", "Bluetooth Mic";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&headset_det &earpath_sel>;
+
+ cpu {
+ sound-dai = <&i2s0>, <&bt_codec>;
+ };
+
+ codec {
+ sound-dai = <&wm8994>;
+ };
+ };
};
&aliases {
@@ -88,6 +155,12 @@ fm_i2c_pins: fm-i2c-pins {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
+ headset_det: headset-det {
+ samsung,pins = "gph0-6", "gph3-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ };
+
fm_irq: fm-irq {
samsung,pins = "gpj2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
@@ -102,6 +175,12 @@ fm_rst: fm-rst {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
+ earpath_sel: earpath-sel {
+ samsung,pins = "gpj2-6";
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
massmemory_en: massmemory-en {
samsung,pins = "gpj2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
@@ -109,6 +188,12 @@ massmemory_en: massmemory-en {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
+ micbias_reg_ena: micbias-reg-ena {
+ samsung,pins = "gpj4-2";
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
/* Based on CyanogenMod 3.0.101 kernel */
sleep_cfg: sleep-cfg {
PIN_SLP(gpa0-0, PREV, NONE);
diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts
index fbbd937..ad8d5d2 100644
--- a/arch/arm/boot/dts/s5pv210-goni.dts
+++ b/arch/arm/boot/dts/s5pv210-goni.dts
@@ -11,6 +11,8 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include "s5pv210.dtsi"
@@ -33,52 +35,49 @@ memory@30000000 {
0x50000000 0x08000000>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ pmic_ap_clk: clock-0 {
+ /* Workaround for missing clock on PMIC */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
- vtf_reg: fixed-regulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "V_TF_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- reg = <0>;
- gpio = <&mp05 4 0>;
- enable-active-high;
- };
+ vtf_reg: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_TF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&mp05 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- pda_reg: fixed-regulator@1 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_1.8V_PDA";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- reg = <1>;
- };
+ pda_reg: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1.8V_PDA";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- bat_reg: fixed-regulator@2 {
- compatible = "regulator-fixed";
- regulator-name = "V_BAT";
- regulator-min-microvolt = <3700000>;
- regulator-max-microvolt = <3700000>;
- reg = <2>;
- };
+ bat_reg: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_BAT";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
- tsp_reg: fixed-regulator@3 {
- compatible = "regulator-fixed";
- regulator-name = "TSP_VDD";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- reg = <3>;
- gpio = <&gpj1 3 0>;
- enable-active-high;
- };
+ tsp_reg: regulator-3 {
+ compatible = "regulator-fixed";
+ regulator-name = "TSP_VDD";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpj1 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
i2c_pmic: i2c-pmic {
compatible = "i2c-gpio";
- gpios = <&gpj4 0 0>, /* sda */
- <&gpj4 3 0>; /* scl */
+ sda-gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpj4 3 GPIO_ACTIVE_HIGH>;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
@@ -88,13 +87,13 @@ pmic@66 {
reg = <0x66>;
max8998,pmic-buck1-default-dvs-idx = <0>;
- max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
- <&gph0 4 0>;
+ max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>,
+ <&gph0 4 GPIO_ACTIVE_HIGH>;
max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
<1200000>, <1200000>;
max8998,pmic-buck2-default-dvs-idx = <0>;
- max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
+ max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
regulators {
@@ -224,6 +223,11 @@ buck4_reg: BUCK4 {
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
+
+ ap32khz_reg: EN32KHz-AP {
+ regulator-name = "32KHz AP";
+ regulator-always-on;
+ };
};
};
};
@@ -308,6 +312,11 @@ &uart3 {
status = "okay";
};
+&rtc {
+ clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
+ clock-names = "rtc", "rtc_src";
+};
+
&sdhci0 {
bus-width = <4>;
non-removable;
@@ -348,7 +357,7 @@ tsp@4a {
compatible = "atmel,maxtouch";
reg = <0x4a>;
interrupt-parent = <&gpj0>;
- interrupts = <5 2>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
atmel,x-line = <17>;
atmel,y-line = <11>;
@@ -378,8 +387,8 @@ noon010pc30: sensor@30 {
clock-frequency = <16000000>;
clocks = <&camera 0>;
clock-names = "mclk";
- nreset-gpios = <&gpb 2 0>;
- nstby-gpios = <&gpb 0 0>;
+ nreset-gpios = <&gpb 2 GPIO_ACTIVE_HIGH>;
+ nstby-gpios = <&gpb 0 GPIO_ACTIVE_HIGH>;
port {
noon010pc30_ep: endpoint {
diff --git a/arch/arm/boot/dts/s5pv210-smdkc110.dts b/arch/arm/boot/dts/s5pv210-smdkc110.dts
index e5aec6c..0c623b7 100644
--- a/arch/arm/boot/dts/s5pv210-smdkc110.dts
+++ b/arch/arm/boot/dts/s5pv210-smdkc110.dts
@@ -30,6 +30,13 @@ memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x20000000>;
};
+
+ pmic_ap_clk: clock-0 {
+ /* Workaround for missing PMIC and its clock */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
};
&xusbxti {
@@ -54,6 +61,8 @@ &uart3 {
&rtc {
status = "okay";
+ clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
+ clock-names = "rtc", "rtc_src";
};
&i2c0 {
diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts
index 84b38f1..7459e41 100644
--- a/arch/arm/boot/dts/s5pv210-smdkv210.dts
+++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts
@@ -15,6 +15,7 @@
*/
/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include "s5pv210.dtsi"
@@ -31,11 +32,18 @@ memory@20000000 {
reg = <0x20000000 0x40000000>;
};
- ethernet@18000000 {
+ pmic_ap_clk: clock-0 {
+ /* Workaround for missing PMIC and its clock */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ ethernet@a8000000 {
compatible = "davicom,dm9000";
reg = <0xA8000000 0x2 0xA8000002 0x2>;
interrupt-parent = <&gph1>;
- interrupts = <1 4>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
local-mac-address = [00 00 de ad be ef];
davicom,no-eeprom;
};
@@ -147,6 +155,8 @@ &uart3 {
&rtc {
status = "okay";
+ clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
+ clock-names = "rtc", "rtc_src";
};
&sdhci0 {
diff --git a/arch/arm/boot/dts/s5pv210-torbreck.dts b/arch/arm/boot/dts/s5pv210-torbreck.dts
index cd25e72..e182597 100644
--- a/arch/arm/boot/dts/s5pv210-torbreck.dts
+++ b/arch/arm/boot/dts/s5pv210-torbreck.dts
@@ -30,6 +30,13 @@ memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x20000000>;
};
+
+ pmic_ap_clk: clock-0 {
+ /* Workaround for missing PMIC and its clock */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
};
&xusbxti {
@@ -54,6 +61,8 @@ &uart3 {
&rtc {
status = "okay";
+ clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
+ clock-names = "rtc", "rtc_src";
};
&sdhci0 {
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 1b0ee88..2871351 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -52,34 +52,26 @@ cpu@0 {
};
};
+ xxti: oscillator-0 {
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ clock-output-names = "xxti";
+ #clock-cells = <0>;
+ };
+
+ xusbxti: oscillator-1 {
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ clock-output-names = "xusbxti";
+ #clock-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
- external-clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- xxti: oscillator@0 {
- compatible = "fixed-clock";
- reg = <0>;
- clock-frequency = <0>;
- clock-output-names = "xxti";
- #clock-cells = <0>;
- };
-
- xusbxti: oscillator@1 {
- compatible = "fixed-clock";
- reg = <1>;
- clock-frequency = <0>;
- clock-output-names = "xusbxti";
- #clock-cells = <0>;
- };
- };
-
onenand: onenand@b0600000 {
compatible = "samsung,s5pv210-onenand";
reg = <0xb0600000 0x2000>,
@@ -100,19 +92,16 @@ chipid@e0000000 {
};
clocks: clock-controller@e0100000 {
- compatible = "samsung,s5pv210-clock", "simple-bus";
+ compatible = "samsung,s5pv210-clock";
reg = <0xe0100000 0x10000>;
clock-names = "xxti", "xusbxti";
clocks = <&xxti>, <&xusbxti>;
#clock-cells = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ };
- pmu_syscon: syscon@e0108000 {
- compatible = "samsung-s5pv210-pmu", "syscon";
- reg = <0xe0108000 0x8000>;
- };
+ pmu_syscon: syscon@e0108000 {
+ compatible = "samsung-s5pv210-pmu", "syscon";
+ reg = <0xe0108000 0x8000>;
};
pinctrl0: pinctrl@e0200000 {
@@ -128,35 +117,28 @@ wakeup-interrupt-controller {
};
};
- amba {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges;
+ pdma0: dma@e0900000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xe0900000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <19>;
+ clocks = <&clocks CLK_PDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
- pdma0: dma@e0900000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0xe0900000 0x1000>;
- interrupt-parent = <&vic0>;
- interrupts = <19>;
- clocks = <&clocks CLK_PDMA0>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
-
- pdma1: dma@e0a00000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0xe0a00000 0x1000>;
- interrupt-parent = <&vic0>;
- interrupts = <20>;
- clocks = <&clocks CLK_PDMA1>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
+ pdma1: dma@e0a00000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xe0a00000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <20>;
+ clocks = <&clocks CLK_PDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
adc: adc@e1700000 {
@@ -241,43 +223,36 @@ i2c2: i2c@e1a00000 {
status = "disabled";
};
- audio-subsystem {
- compatible = "samsung,s5pv210-audss", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ clk_audss: clock-controller@eee10000 {
+ compatible = "samsung,s5pv210-audss-clock";
+ reg = <0xeee10000 0x1000>;
+ clock-names = "hclk", "xxti",
+ "fout_epll",
+ "sclk_audio0";
+ clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+ <&clocks FOUT_EPLL>,
+ <&clocks SCLK_AUDIO0>;
+ #clock-cells = <1>;
+ };
- clk_audss: clock-controller@eee10000 {
- compatible = "samsung,s5pv210-audss-clock";
- reg = <0xeee10000 0x1000>;
- clock-names = "hclk", "xxti",
- "fout_epll",
- "sclk_audio0";
- clocks = <&clocks DOUT_HCLKP>, <&xxti>,
- <&clocks FOUT_EPLL>,
- <&clocks SCLK_AUDIO0>;
- #clock-cells = <1>;
- };
-
- i2s0: i2s@eee30000 {
- compatible = "samsung,s5pv210-i2s";
- reg = <0xeee30000 0x1000>;
- interrupt-parent = <&vic2>;
- interrupts = <16>;
- dma-names = "rx", "tx", "tx-sec";
- dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
- clock-names = "iis",
- "i2s_opclk0",
- "i2s_opclk1";
- clocks = <&clk_audss CLK_I2S>,
- <&clk_audss CLK_I2S>,
- <&clk_audss CLK_DOUT_AUD_BUS>;
- samsung,idma-addr = <0xc0010000>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2s0_bus>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
+ i2s0: i2s@eee30000 {
+ compatible = "samsung,s5pv210-i2s";
+ reg = <0xeee30000 0x1000>;
+ interrupt-parent = <&vic2>;
+ interrupts = <16>;
+ dma-names = "rx", "tx", "tx-sec";
+ dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
+ clock-names = "iis",
+ "i2s_opclk0",
+ "i2s_opclk1";
+ clocks = <&clk_audss CLK_I2S>,
+ <&clk_audss CLK_I2S>,
+ <&clk_audss CLK_DOUT_AUD_BUS>;
+ samsung,idma-addr = <0xc0010000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_bus>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
};
i2s1: i2s@e2100000 {
diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
index 42f7621..84066c1 100644
--- a/arch/arm/boot/dts/sam9x60.dtsi
+++ b/arch/arm/boot/dts/sam9x60.dtsi
@@ -32,16 +32,17 @@ aliases {
};
cpus {
- #address-cells = <0>;
+ #address-cells = <1>;
#size-cells = <0>;
- cpu {
+ cpu@0 {
compatible = "arm,arm926ej-s";
device_type = "cpu";
+ reg = <0>;
};
};
- memory {
+ memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x10000000>;
};
@@ -61,6 +62,9 @@ main_xtal: main_xtal {
sram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00300000 0x100000>;
};
ahb {
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index d7f2570..2ddc85d 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -72,7 +72,7 @@ etm_out: endpoint {
};
};
- memory {
+ memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x20000000>;
};
@@ -94,6 +94,9 @@ main_xtal: main_xtal {
ns_sram: sram@200000 {
compatible = "mmio-sram";
reg = <0x00200000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00200000 0x20000>;
};
ahb {
@@ -106,6 +109,10 @@ nfc_sram: sram@100000 {
compatible = "mmio-sram";
no-memory-wc;
reg = <0x00100000 0x2400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00100000 0x2400>;
+
};
usb0: gadget@300000 {
@@ -535,6 +542,8 @@ spi2: spi@400 {
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
clock-names = "spi_clk";
dmas = <&dma0
@@ -603,6 +612,8 @@ spi3: spi@400 {
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
clock-names = "spi_clk";
dmas = <&dma0
@@ -810,6 +821,8 @@ spi4: spi@400 {
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
clock-names = "spi_clk";
dmas = <&dma0
@@ -878,6 +891,8 @@ spi5: spi@400 {
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
clock-names = "spi_clk";
dmas = <&dma0
@@ -947,6 +962,8 @@ spi6: spi@400 {
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
clock-names = "spi_clk";
dmas = <&dma0
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 0bb5b6f..86137f8 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -55,7 +55,7 @@ pmu {
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>;
};
- memory {
+ memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x8000000>;
};
@@ -83,6 +83,9 @@ adc_op_clk: adc_op_clk{
sram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00300000 0x20000>;
};
ahb {
@@ -1073,6 +1076,9 @@ nfc_sram: sram@200000 {
compatible = "mmio-sram";
no-memory-wc;
reg = <0x200000 0x2400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x200000 0x2400>;
};
usb0: gadget@500000 {
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index 65566e4..3843356 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -14,7 +14,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi
index 9d25636..5579c955 100644
--- a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi
@@ -12,7 +12,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 2d9f853..04f24cf 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -53,7 +53,7 @@ cpu@0 {
};
};
- memory {
+ memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x20000000>;
};
@@ -81,6 +81,9 @@ adc_op_clk: adc_op_clk{
ns_sram: sram@210000 {
compatible = "mmio-sram";
reg = <0x00210000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00210000 0x10000>;
};
ahb {
@@ -93,6 +96,9 @@ nfc_sram: sram@100000 {
compatible = "mmio-sram";
no-memory-wc;
reg = <0x100000 0x2400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x100000 0x2400>;
};
usb0: gadget@400000 {
diff --git a/arch/arm/boot/dts/sd5203.dts b/arch/arm/boot/dts/sd5203.dts
new file mode 100644
index 0000000..3cc9a23
--- /dev/null
+++ b/arch/arm/boot/dts/sd5203.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 Hisilicon Limited.
+ *
+ * DTS file for Hisilicon SD5203 Board
+ */
+
+/dts-v1/;
+
+/ {
+ model = "Hisilicon SD5203";
+ compatible = "H836ASDJ", "hisilicon,sd5203";
+ interrupt-parent = <&vic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ bootargs="console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0 {
+ device_type = "cpu";
+ compatible = "arm,arm926ej-s";
+ reg = <0x0>;
+ };
+ };
+
+ memory@30000000 {
+ device_type = "memory";
+ reg = <0x30000000 0x8000000>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ vic: interrupt-controller@10130000 {
+ compatible = "snps,dw-apb-ictl";
+ reg = <0x10130000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ refclk125mhz: refclk125mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ timer0: timer@16002000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x16002000 0x1000>;
+ interrupts = <4>;
+ clocks = <&refclk125mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ timer1: timer@16003000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x16003000 0x1000>;
+ interrupts = <5>;
+ clocks = <&refclk125mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ uart0: serial@1600d000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x1600d000 0x1000>;
+ bus_id = "uart0";
+ clocks = <&refclk125mhz>;
+ clock-names = "baudclk", "apb_pclk";
+ reg-shift = <2>;
+ interrupts = <17>;
+ };
+
+ uart1: serial@1600c000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x1600c000 0x1000>;
+ clocks = <&refclk125mhz>;
+ clock-names = "baudclk", "apb_pclk";
+ reg-shift = <2>;
+ interrupts = <16>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index a4d6312..30c67ac 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -448,7 +448,7 @@ scifb: serial@e6c30000 {
status = "disabled";
};
- pfc: pin-controller@e6050000 {
+ pfc: pinctrl@e6050000 {
compatible = "renesas,pfc-sh73a0";
reg = <0xe6050000 0x8000>,
<0xe605801c 0x1c>;
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index f187da4..c87b881 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -43,7 +43,7 @@ pmu {
0 7 0x04>;
};
- L2: l2-cache {
+ L2: cache-controller {
compatible = "arm,pl310-cache";
reg = <0xed000000 0x1000>;
cache-unified;
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 33e3b0b..ff47cbf 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -58,16 +58,21 @@ lp5521@33 {
reg = <0x33>;
label = "lp5521_pri";
clock-mode = /bits/ 8 <2>;
- chan0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ chan@0 {
+ reg = <0>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
linux,default-trigger = "heartbeat";
};
- chan1 {
+ chan@1 {
+ reg = <1>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
- chan2 {
+ chan@2 {
+ reg = <2>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
@@ -77,15 +82,20 @@ lp5521@34 {
reg = <0x34>;
label = "lp5521_sec";
clock-mode = /bits/ 8 <2>;
- chan0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ chan@0 {
+ reg = <0>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
- chan1 {
+ chan@1 {
+ reg = <1>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
- chan2 {
+ chan@2 {
+ reg = <2>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
index 1e26b71..a1093cb 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -316,6 +316,28 @@ ab8500_ldo_aux8 {
};
};
};
+
+ mcde@a0350000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dsi_default_mode>;
+
+ dsi-controller@a0351000 {
+ panel@0 {
+ compatible = "samsung,s6e63m0";
+ reg = <0>;
+ vdd3-supply = <&panel_reg_3v0>;
+ vci-supply = <&panel_reg_1v8>;
+ reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ /* ESD (electrostatic discharge) detection interrupt */
+ interrupt-parent = <&gpio2>;
+ interrupts = <18 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "esd";
+ pinctrl-names = "default";
+ pinctrl-0 = <&display_default_mode>;
+ };
+ };
+ };
};
gpio-keys {
@@ -415,6 +437,40 @@ wl_reg_on: regulator-wl-reg-on {
pinctrl-names = "default";
pinctrl-0 = <&wlan_en_default>;
};
+
+ /* MIC5366 GPIO-controlled regulator */
+ panel_reg_1v8: regulator-panel-1v8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "panel-fixed-supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ /* GPIO219 */
+ gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+
+ startup-delay-us = <200>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_reg_default_mode>;
+ };
+
+ /* MIC5366 GPIO-controlled regulator */
+ panel_reg_3v0: regulator-panel-3v0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "panel-fixed-supply";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ /* GPIO219 */
+ gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+
+ startup-delay-us = <200>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_reg_default_mode>;
+ };
};
&pinctrl {
@@ -476,6 +532,41 @@ golden_cfg1 {
};
};
+ mcde {
+ dsi_default_mode: dsi_default {
+ default_mux1 {
+ /* Mux in VSI0 used for DSI TE */
+ function = "lcd";
+ groups =
+ "lcdvsi0_a_1"; /* VSI0 for LCD */
+ };
+ default_cfg1 {
+ pins =
+ "GPIO68_E1"; /* VSI0 */
+ ste,config = <&in_nopull>;
+ };
+ };
+ };
+
+ display {
+ display_default_mode: display_default {
+ golden_cfg1 {
+ pins = "GPIO139_C9"; /* MIPI_DSI0_RESET_N */
+ ste,config = <&gpio_out_lo>;
+ };
+ golden_cfg2 {
+ pins = "GPIO82_C1"; /* LDI_ESD_DET */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ panel_reg_default_mode: panel_reg_default {
+ golden_cfg1 {
+ pins = "GPIO219_AG10"; /* LCD_PWR_EN */
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+
proximity {
proximity_default: proximity_default {
golden_cfg1 {
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index d6f6ac0..27722c4 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -108,15 +108,12 @@ button-back {
};
};
- /*
- * FIXME: this is not quite GPIO backlight. This is a
- * KTD253 one-wire GPIO-controlled backlight. It can
- * work as a GPIO backlight.
- */
- gpio_bl: backlight {
- compatible = "gpio-backlight";
+ ktd253: backlight {
+ compatible = "kinetic,ktd253";
/* GPIO 69 */
- gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ /* Default to 13/32 brightness */
+ default-brightness = <13>;
pinctrl-names = "default";
pinctrl-0 = <&gpio_backlight_default_mode>;
};
@@ -409,7 +406,7 @@ panel {
reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&display_default_mode>;
- backlight = <&gpio_bl>;
+ backlight = <&ktd253>;
};
};
};
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 69e2f1e..7febe19 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -110,6 +110,7 @@ spi2: spi@40003800 {
compatible = "st,stm32h7-spi";
reg = <0x40003800 0x400>;
interrupts = <36>;
+ resets = <&rcc STM32H7_APB1L_RESET(SPI2)>;
clocks = <&rcc SPI2_CK>;
status = "disabled";
@@ -121,12 +122,13 @@ spi3: spi@40003c00 {
compatible = "st,stm32h7-spi";
reg = <0x40003c00 0x400>;
interrupts = <51>;
+ resets = <&rcc STM32H7_APB1L_RESET(SPI3)>;
clocks = <&rcc SPI3_CK>;
status = "disabled";
};
usart2: serial@40004400 {
- compatible = "st,stm32f7-uart";
+ compatible = "st,stm32h7-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
status = "disabled";
@@ -194,7 +196,7 @@ dac2: dac@2 {
};
usart1: serial@40011000 {
- compatible = "st,stm32f7-uart";
+ compatible = "st,stm32h7-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
status = "disabled";
@@ -207,6 +209,7 @@ spi1: spi@40013000 {
compatible = "st,stm32h7-spi";
reg = <0x40013000 0x400>;
interrupts = <35>;
+ resets = <&rcc STM32H7_APB2_RESET(SPI1)>;
clocks = <&rcc SPI1_CK>;
status = "disabled";
};
@@ -217,6 +220,7 @@ spi4: spi@40013400 {
compatible = "st,stm32h7-spi";
reg = <0x40013400 0x400>;
interrupts = <84>;
+ resets = <&rcc STM32H7_APB2_RESET(SPI4)>;
clocks = <&rcc SPI4_CK>;
status = "disabled";
};
@@ -227,6 +231,7 @@ spi5: spi@40015000 {
compatible = "st,stm32h7-spi";
reg = <0x40015000 0x400>;
interrupts = <85>;
+ resets = <&rcc STM32H7_APB2_RESET(SPI5)>;
clocks = <&rcc SPI5_CK>;
status = "disabled";
};
@@ -329,6 +334,16 @@ usbotg_fs: usb@40080000 {
status = "disabled";
};
+ ltdc: display-controller@50001000 {
+ compatible = "st,stm32-ltdc";
+ reg = <0x50001000 0x200>;
+ interrupts = <88>, <89>;
+ resets = <&rcc STM32H7_APB3_RESET(LTDC)>;
+ clocks = <&rcc LTDC_CK>;
+ clock-names = "lcd";
+ status = "disabled";
+ };
+
mdma1: dma-controller@52000000 {
compatible = "st,stm32h7-mdma";
reg = <0x52000000 0x1000>;
@@ -372,6 +387,7 @@ spi6: spi@58001400 {
compatible = "st,stm32h7-spi";
reg = <0x58001400 0x400>;
interrupts = <86>;
+ resets = <&rcc STM32H7_APB4_RESET(SPI6)>;
clocks = <&rcc SPI6_CK>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index b5a6642..d84686e 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1437,6 +1437,24 @@ pins {
};
};
+ sdmmc2_d47_pins_d: sdmmc2-d47-3 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+ };
+ };
+
+ sdmmc2_d47_sleep_pins_d: sdmmc2-d47-sleep-3 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
+ };
+ };
+
sdmmc3_b4_pins_a: sdmmc3-b4-0 {
pins1 {
pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
@@ -1700,6 +1718,14 @@ pins2 {
};
};
+ uart8_rtscts_pins_a: uart8rtscts-0 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 7, AF8)>, /* UART8_RTS */
+ <STM32_PINMUX('G', 10, AF8)>; /* UART8_CTS */
+ bias-disable;
+ };
+ };
+
spi4_pins_a: spi4-0 {
pins {
pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index bfe2902..8475790 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -23,6 +23,13 @@ cpu0: cpu@0 {
};
};
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>;
+ interrupt-parent = <&intc>;
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -1302,23 +1309,38 @@ mdma1: dma-controller@58000000 {
dma-requests = <48>;
};
- fmc: nand-controller@58002000 {
- compatible = "st,stm32mp15-fmc2";
- reg = <0x58002000 0x1000>,
- <0x80000000 0x1000>,
- <0x88010000 0x1000>,
- <0x88020000 0x1000>,
- <0x81000000 0x1000>,
- <0x89010000 0x1000>,
- <0x89020000 0x1000>;
- interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma1 20 0x10 0x12000a02 0x0 0x0>,
- <&mdma1 20 0x10 0x12000a08 0x0 0x0>,
- <&mdma1 21 0x10 0x12000a0a 0x0 0x0>;
- dma-names = "tx", "rx", "ecc";
+ fmc: memory-controller@58002000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp1-fmc2-ebi";
+ reg = <0x58002000 0x1000>;
clocks = <&rcc FMC_K>;
resets = <&rcc FMC_R>;
status = "disabled";
+
+ ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+ <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+ <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+ <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+ <4 0 0x80000000 0x10000000>; /* NAND */
+
+ nand-controller@4,0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32mp1-fmc2-nfc";
+ reg = <4 0x00000000 0x1000>,
+ <4 0x08010000 0x1000>,
+ <4 0x08020000 0x1000>,
+ <4 0x01000000 0x1000>,
+ <4 0x09010000 0x1000>,
+ <4 0x09020000 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
+ <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
+ <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
+ dma-names = "tx", "rx", "ecc";
+ status = "disabled";
+ };
};
qspi: spi@58003000 {
diff --git a/arch/arm/boot/dts/stm32mp153.dtsi b/arch/arm/boot/dts/stm32mp153.dtsi
index 6d9ab08..1c1889b 100644
--- a/arch/arm/boot/dts/stm32mp153.dtsi
+++ b/arch/arm/boot/dts/stm32mp153.dtsi
@@ -16,6 +16,12 @@ cpu1: cpu@1 {
};
};
+ arm-pmu {
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ };
+
soc {
m_can1: can@4400e000 {
compatible = "bosch,m_can";
diff --git a/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts b/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts
new file mode 100644
index 0000000..02a3913
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM STM32MP1 variant:
+ * DHCM-STM32MP153C-C065-R102-F0819-SPI-E2-CAN2-RTC-I-01D2
+ * DHCOM PCB number: 587-200 or newer
+ * DRC02 PCB number: 568-100 or newer
+ */
+/dts-v1/;
+
+#include "stm32mp153.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xx-dhcom-som.dtsi"
+#include "stm32mp15xx-dhcom-drc02.dtsi"
+
+/ {
+ model = "DH electronics STM32MP153C DHCOM DRC02";
+ compatible = "dh,stm32mp153c-dhcom-drc02", "dh,stm32mp153c-dhcom-som",
+ "st,stm32mp153";
+};
+
+&m_can1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&m_can1_pins_a>;
+ pinctrl-1 = <&m_can1_sleep_pins_a>;
+ status = "okay";
+};
+
+&m_can2 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&m_can2_pins_a>;
+ pinctrl-1 = <&m_can2_sleep_pins_a>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
index 197aa98..d3b8138 100644
--- a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
@@ -4,7 +4,7 @@
*
* DHCOM STM32MP1 variant:
* DHCM-STM32MP157C-C065-R102-F0819-SPI-E2-CAN2-SDR104-RTC-WBT-T-DSI-I-01D2
- * DHCOR PCB number: 587-200 or newer
+ * DHCOM PCB number: 587-200 or newer
* PDK2 PCB number: 516-400 or newer
*/
/dts-v1/;
@@ -15,7 +15,7 @@
#include "stm32mp15xx-dhcom-pdk2.dtsi"
/ {
- model = "DH Electronics STM32MP157C DHCOM Premium Developer Kit (2)";
+ model = "DH electronics STM32MP157C DHCOM Premium Developer Kit (2)";
compatible = "dh,stm32mp157c-dhcom-pdk2", "dh,stm32mp157c-dhcom-som",
"st,stm32mp157";
};
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 85628e1..a55e80c 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -158,14 +158,16 @@ &fmc {
pinctrl-0 = <&fmc_pins_a>;
pinctrl-1 = <&fmc_sleep_pins_a>;
status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
- nand@0 {
- reg = <0>;
- nand-on-flash-bbt;
- #address-cells = <1>;
- #size-cells = <1>;
+ nand-controller@4,0 {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ nand-on-flash-bbt;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
};
};
diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
index 5700e6b..1e5333f 100644
--- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
@@ -121,8 +121,6 @@ ethphy: ethernet-phy@3 { /* KSZ9031RN */
reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */
interrupt-parent = <&gpioa>;
interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* ETH_MDINT# */
- rxc-skew-ps = <1860>;
- txc-skew-ps = <1860>;
reset-assert-us = <10000>;
reset-deassert-us = <300>;
micrel,force-master;
@@ -214,6 +212,7 @@ &sdmmc2 {
pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_b>;
pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_b>;
bus-width = <8>;
+ mmc-ddr-3_3v;
no-1-8-v;
no-sd;
no-sdio;
diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
new file mode 100644
index 0000000..6cf49a0
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+ model = "Seeed Studio Odyssey-STM32MP157C SOM";
+ compatible = "seeed,stm32mp157c-odyssey-som", "st,stm32mp157";
+
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mcuram2: mcuram2@10000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10000000 0x40000>;
+ no-map;
+ };
+
+ vdev0vring0: vdev0vring0@10040000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10040000 0x1000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1@10041000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10041000 0x1000>;
+ no-map;
+ };
+
+ vdev0buffer: vdev0buffer@10042000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10042000 0x4000>;
+ no-map;
+ };
+
+ mcuram: mcuram@30000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x30000000 0x40000>;
+ no-map;
+ };
+
+ retram: retram@38000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x38000000 0x10000>;
+ no-map;
+ };
+
+ gpu_reserved: gpu@d4000000 {
+ reg = <0xd4000000 0x4000000>;
+ no-map;
+ };
+ };
+
+ led {
+ compatible = "gpio-leds";
+ led-blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&gpu {
+ contiguous-area = <&gpu_reserved>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+ /* spare dmas for other usage */
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+ ldo1-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <0>;
+ };
+
+ v1v8_audio: ldo1 {
+ regulator-name = "v1v8_audio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO1 0>;
+ };
+
+ v3v3_hdmi: ldo2 {
+ regulator-name = "v3v3_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO2 0>;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <750000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ interrupts = <IT_CURLIM_LDO4 0>;
+ };
+
+ vdda: ldo5 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ interrupts = <IT_CURLIM_LDO5 0>;
+ regulator-boot-on;
+ };
+
+ v1v2_hdmi: ldo6 {
+ regulator-name = "v1v2_hdmi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO6 0>;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ interrupts = <IT_OCP_BOOST 0>;
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ interrupts = <IT_OCP_OTG 0>;
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ interrupts = <IT_OCP_SWOUT 0>;
+ regulator-active-discharge;
+ };
+ };
+
+ onkey {
+ compatible = "st,stpmic1-onkey";
+ interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+ interrupt-names = "onkey-falling", "onkey-rising";
+ power-off-time-sec = <10>;
+ };
+
+ watchdog {
+ compatible = "st,stpmic1-wdt";
+ status = "disabled";
+ };
+ };
+};
+
+&ipcc {
+ status = "okay";
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&m4_rproc {
+ memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+ <&vdev0vring1>, <&vdev0buffer>;
+ mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+ mbox-names = "vq0", "vq1", "shutdown";
+ interrupt-parent = <&exti>;
+ interrupts = <68 1>;
+ status = "okay";
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sdmmc2 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_d>;
+ pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_d>;
+ pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_d>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ st,neg-edge;
+ bus-width = <8>;
+ vmmc-supply = <&v3v3>;
+ vqmmc-supply = <&v3v3>;
+ mmc-ddr-3_3v;
+ status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
new file mode 100644
index 0000000..a7ffec8
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c-odyssey-som.dtsi"
+
+/ {
+ model = "Seeed Studio Odyssey-STM32MP157C Board";
+ compatible = "seeed,stm32mp157c-odyssey",
+ "seeed,stm32mp157c-odyssey-som", "st,stm32mp157";
+
+ aliases {
+ ethernet0 = ðernet0;
+ serial0 = &uart4;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+ðernet0 {
+ status = "okay";
+ pinctrl-0 = <ðernet0_rgmii_pins_a>;
+ pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rgmii-id";
+ max-speed = <1000>;
+ phy-handle = <&phy0>;
+ assigned-clocks = <&rcc ETHCK_K>, <&rcc PLL4_P>;
+ assigned-clock-parents = <&rcc PLL4_P>;
+ assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF/U-Boot */
+ st,eth-clk-sel;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@7 { /* KSZ9031RN */
+ reg = <7>;
+ reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */
+ reset-assert-us = <10000>;
+ reset-deassert-us = <300>;
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c1_pins_a>;
+ pinctrl-1 = <&i2c1_sleep_pins_a>;
+ i2c-scl-rising-time-ns = <100>;
+ i2c-scl-falling-time-ns = <7>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+};
+
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+ disable-wp;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&v3v3>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
new file mode 100644
index 0000000..62ab238
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ aliases {
+ serial0 = &uart4;
+ serial1 = &usart3;
+ serial2 = &uart8;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&adc {
+ status = "disabled";
+};
+
+&dac {
+ status = "disabled";
+};
+
+&gpiob {
+ /*
+ * NOTE: On DRC02, the RS485_RX_En is controlled by a separate
+ * GPIO line, however the STM32 UART driver assumes RX happens
+ * during TX anyway and that it only controls drive enable DE
+ * line. Hence, the RX is always enabled here.
+ */
+ rs485-rx-en {
+ gpio-hog;
+ gpios = <8 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "rs485-rx-en";
+ };
+};
+
+&gpiod {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "", "", "", "Out1",
+ "Out2", "", "", "";
+};
+
+&gpioi {
+ gpio-line-names = "In1", "", "", "",
+ "", "", "", "",
+ "In2", "", "", "",
+ "", "", "", "";
+
+ /*
+ * NOTE: The USB Hub on the DRC02 needs a reset signal to be
+ * pulled high in order to be detected by the USB Controller.
+ * This signal should be handled by USB power sequencing in
+ * order to reset the Hub when USB bus is powered down, but
+ * so far there is no such functionality.
+ */
+ usb-hub {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb-hub-reset";
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+ /* spare dmas for other usage */
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c04";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&i2c5 { /* TP7/TP8 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+ /* spare dmas for other usage */
+ /delete-property/dmas;
+ /delete-property/dma-names;
+};
+
+&sdmmc3 {
+ /*
+ * On DRC02, the SoM does not have SDIO WiFi. The pins
+ * are used for on-board microSD slot instead.
+ */
+ /delete-property/broken-cd;
+ cd-gpios = <&gpioi 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+ disable-wp;
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins_a>;
+ cs-gpios = <&gpioz 3 0>;
+ /* Use PIO for the display */
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "disabled"; /* Enable once there is display driver */
+ /*
+ * Note: PF3/GPIO_A , PD6/GPIO_B , PG0/GPIO_C , PC6/GPIO_E are
+ * also connected to the display board connector.
+ */
+};
+
+&usart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usart3_pins_a>;
+ status = "okay";
+};
+
+/*
+ * Note: PI3 is UART1_RTS and PI5 is UART1_CTS on DRC02 (uart4 of STM32MP1),
+ * however the STM32MP1 pinmux cannot map them to UART4 .
+ */
+
+&uart8 { /* RS485 */
+ linux,rs485-enabled-at-boot-time;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart8_pins_a>;
+ rts-gpios = <&gpioe 6 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&usbh_ehci {
+ phys = <&usbphyc_port0>;
+ status = "okay";
+};
+
+&usbphyc {
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&vdd_usb>;
+ vdda1v1-supply = <®11>;
+ vdda1v8-supply = <®18>;
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index 7c4bd61..5dff24e 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -11,7 +11,6 @@ aliases {
serial0 = &uart4;
serial1 = &usart3;
serial2 = &uart8;
- ethernet0 = ðernet0;
};
chosen {
@@ -26,23 +25,13 @@ clk_ext_audio_codec: clock-codec {
display_bl: display-bl {
compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+ pwms = <&pwm2 3 500000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
default-brightness-level = <8>;
enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
status = "okay";
};
- ethernet_vio: vioregulator {
- compatible = "regulator-fixed";
- regulator-name = "vio";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
- regulator-always-on;
- regulator-boot-on;
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#size-cells = <0>;
@@ -141,28 +130,6 @@ &cec {
status = "okay";
};
-ðernet0 {
- status = "okay";
- pinctrl-0 = <ðernet0_rmii_pins_a>;
- pinctrl-1 = <ðernet0_rmii_sleep_pins_a>;
- pinctrl-names = "default", "sleep";
- phy-mode = "rmii";
- max-speed = <100>;
- phy-handle = <&phy0>;
- st,eth-ref-clk-sel;
- phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>;
-
- mdio0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
-
- phy0: ethernet-phy@1 {
- reg = <1>;
- };
- };
-};
-
&i2c2 { /* Header X22 */
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
@@ -304,7 +271,8 @@ &usart3 {
&uart8 {
pinctrl-names = "default";
- pinctrl-0 = <&uart8_pins_a>;
+ pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
+ uart-has-rtscts;
status = "okay";
};
@@ -314,9 +282,12 @@ &usbh_ehci {
};
&usbotg_hs {
- dr_mode = "peripheral";
- phys = <&usbphyc_port1 0>;
+ dr_mode = "otg";
+ pinctrl-0 = <&usbotg_hs_pins_a>;
+ pinctrl-names = "default";
phy-names = "usb2-phy";
+ phys = <&usbphyc_port1 0>;
+ vbus-supply = <&vbus_otg>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index ba90519..b4b52cf 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -9,6 +9,10 @@
#include <dt-bindings/mfd/st,stpmic1.h>
/ {
+ aliases {
+ ethernet0 = ðernet0;
+ };
+
memory@c0000000 {
device_type = "memory";
reg = <0xC0000000 0x40000000>;
@@ -55,6 +59,16 @@ retram: retram@38000000 {
no-map;
};
};
+
+ ethernet_vio: vioregulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vio";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&adc {
@@ -94,6 +108,28 @@ &dts {
status = "okay";
};
+ðernet0 {
+ status = "okay";
+ pinctrl-0 = <ðernet0_rmii_pins_a>;
+ pinctrl-1 = <ðernet0_rmii_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rmii";
+ max-speed = <100>;
+ phy-handle = <&phy0>;
+ st,eth-ref-clk-sel;
+ phy-reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+};
+
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&i2c4_pins_a>;
@@ -249,7 +285,7 @@ touchscreen@49 {
compatible = "ti,tsc2004";
reg = <0x49>;
vio-supply = <&v3v3>;
- interrupts-extended = <&gpioh 3 IRQ_TYPE_EDGE_FALLING>;
+ interrupts-extended = <&gpioh 15 IRQ_TYPE_EDGE_FALLING>;
};
eeprom@50 {
@@ -285,8 +321,8 @@ &pwr_regulators {
&qspi {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
- pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
+ pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
+ pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
index 9302027..ec02cee 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -295,9 +295,9 @@ &sdmmc1 {
&sdmmc2 {
pinctrl-names = "default", "opendrain", "sleep";
- pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>;
- pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_b>;
- pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_b>;
+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>;
+ pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>;
+ pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>;
bus-width = <8>;
mmc-ddr-1_8v;
no-sd;
@@ -351,6 +351,7 @@ &uart7 {
label = "LS-UART0";
pinctrl-names = "default";
pinctrl-0 = <&uart7_pins_a>;
+ uart-has-rtscts;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index 8692b11..af8ab73 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -60,6 +60,17 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -133,6 +144,20 @@ &emac_sram {
status = "okay";
};
+&de {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
index 3d78169..a1953b2 100644
--- a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
+++ b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
@@ -194,8 +194,8 @@ &sound {
"Headphone", "Headphone Jack";
/* Board level routing. First 2 routes copied from SoC level */
simple-audio-card,routing =
- "Left DAC", "AIF1 Slot 0 Left",
- "Right DAC", "AIF1 Slot 0 Right",
+ "Left DAC", "DACL",
+ "Right DAC", "DACR",
"HP", "HPCOM",
"Headphone Jack", "HP",
"MIC1", "Microphone Jack",
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index cfd3858..c458f5f 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -189,8 +189,8 @@ sound: sound {
simple-audio-card,mclk-fs = <128>;
simple-audio-card,aux-devs = <&codec_analog>;
simple-audio-card,routing =
- "Left DAC", "AIF1 Slot 0 Left",
- "Right DAC", "AIF1 Slot 0 Right";
+ "Left DAC", "DACL",
+ "Right DAC", "DACR";
status = "disabled";
simple-audio-card,cpu {
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index 42d62d1..2fc62ef 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -164,6 +164,10 @@ axp22x: pmic@34 {
#include "axp22x.dtsi"
+&ir0 {
+ status = "okay";
+};
+
&mmc0 {
vmmc-supply = <®_dcdc1>;
bus-width = <4>;
@@ -223,16 +227,16 @@ ®_aldo3 {
};
®_dc1sw {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-name = "vcc-gmac-phy";
};
®_dcdc1 {
regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcc-3v0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
};
®_dcdc2 {
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index b782041..7907569 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -190,6 +190,29 @@ mixer1_out_tcon_top: endpoint {
};
};
+ syscon: system-control@1c00000 {
+ compatible = "allwinner,sun8i-r40-system-control",
+ "allwinner,sun4i-a10-system-control";
+ reg = <0x01c00000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram_c: sram@1d00000 {
+ compatible = "mmio-sram";
+ reg = <0x01d00000 0xd0000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x01d00000 0xd0000>;
+
+ ve_sram: sram-section@0 {
+ compatible = "allwinner,sun8i-r40-sram-c1",
+ "allwinner,sun4i-a10-sram-c1";
+ reg = <0x000000 0x80000>;
+ };
+ };
+ };
+
nmi_intc: interrupt-controller@1c00030 {
compatible = "allwinner,sun7i-a20-sc-nmi";
interrupt-controller;
@@ -198,6 +221,18 @@ nmi_intc: interrupt-controller@1c00030 {
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
+ dma: dma-controller@1c02000 {
+ compatible = "allwinner,sun8i-r40-dma",
+ "allwinner,sun50i-a64-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>;
+ dma-channels = <16>;
+ dma-requests = <31>;
+ resets = <&ccu RST_BUS_DMA>;
+ #dma-cells = <1>;
+ };
+
spi0: spi@1c05000 {
compatible = "allwinner,sun8i-r40-spi",
"allwinner,sun8i-h3-spi";
@@ -238,6 +273,17 @@ csi0: csi@1c09000 {
status = "disabled";
};
+ video-codec@1c0e000 {
+ compatible = "allwinner,sun8i-r40-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_BUS_VE>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun8i-r40-mmc",
"allwinner,sun50i-a64-mmc";
@@ -501,6 +547,16 @@ i2c4_pins: i2c4-pins {
function = "i2c4";
};
+ ir0_pins: ir0-pins {
+ pins = "PB4";
+ function = "ir0";
+ };
+
+ ir1_pins: ir1-pins {
+ pins = "PB23";
+ function = "ir1";
+ };
+
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
@@ -579,6 +635,32 @@ wdt: watchdog@1c20c90 {
clocks = <&osc24M>;
};
+ ir0: ir@1c21800 {
+ compatible = "allwinner,sun8i-r40-ir",
+ "allwinner,sun6i-a31-ir";
+ reg = <0x01c21800 0x400>;
+ pinctrl-0 = <&ir0_pins>;
+ pinctrl-names = "default";
+ clocks = <&ccu CLK_BUS_IR0>, <&ccu CLK_IR0>;
+ clock-names = "apb", "ir";
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_BUS_IR0>;
+ status = "disabled";
+ };
+
+ ir1: ir@1c21c00 {
+ compatible = "allwinner,sun8i-r40-ir",
+ "allwinner,sun6i-a31-ir";
+ reg = <0x01c21c00 0x400>;
+ pinctrl-0 = <&ir1_pins>;
+ pinctrl-names = "default";
+ clocks = <&ccu CLK_BUS_IR1>, <&ccu CLK_IR1>;
+ clock-names = "apb", "ir";
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_BUS_IR1>;
+ status = "disabled";
+ };
+
ths: thermal-sensor@1c24c00 {
compatible = "allwinner,sun8i-r40-ths";
reg = <0x01c24c00 0x100>;
@@ -743,6 +825,28 @@ i2c4: i2c@1c2c000 {
#size-cells = <0>;
};
+ mali: gpu@1c40000 {
+ compatible = "allwinner,sun8i-r40-mali", "arm,mali-400";
+ reg = <0x01c40000 0x10000>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pmu";
+ clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+ clock-names = "bus", "core";
+ resets = <&ccu RST_BUS_GPU>;
+ };
+
gmac: ethernet@1c50000 {
compatible = "allwinner,sun8i-r40-gmac";
syscon = <&ccu>;
diff --git a/arch/arm/boot/dts/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/sun8i-s3-pinecube.dts
new file mode 100644
index 0000000..9bab6b7
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-s3-pinecube.dts
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "sun8i-v3.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "PineCube IP Camera";
+ compatible = "pine64,pinecube", "allwinner,sun8i-s3";
+
+ aliases {
+ serial0 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led1 {
+ label = "pine64:ir:led1";
+ gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
+ };
+
+ led2 {
+ label = "pine64:ir:led2";
+ gpios = <&pio 1 12 GPIO_ACTIVE_LOW>; /* PB12 */
+ };
+ };
+
+ reg_vcc5v0: vcc5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_vcc_wifi: vcc-wifi {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-wifi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pio 1 2 GPIO_ACTIVE_LOW>; /* PB2 WIFI-EN */
+ vin-supply = <®_dcdc3>;
+ startup-delay-us = <200000>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&csi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&csi1_8bit_pins>;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi1_ep: endpoint {
+ remote-endpoint = <&ov5640_ep>;
+ bus-width = <8>;
+ hsync-active = <1>; /* Active high */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp203",
+ "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pe_pins>;
+ status = "okay";
+
+ ov5640: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&csi1_mclk_pin>;
+ clocks = <&ccu CLK_CSI1_MCLK>;
+ clock-names = "xclk";
+
+ AVDD-supply = <®_ldo3>;
+ DOVDD-supply = <®_ldo3>;
+ DVDD-supply = <®_ldo4>;
+ reset-gpios = <&pio 4 23 GPIO_ACTIVE_LOW>; /* PE23 */
+ powerdown-gpios = <&pio 4 24 GPIO_ACTIVE_HIGH>; /* PE24 */
+
+ port {
+ ov5640_ep: endpoint {
+ remote-endpoint = <&csi1_ep>;
+ bus-width = <8>;
+ hsync-active = <1>; /* Active high */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+ };
+};
+
+&lradc {
+ vref-supply = <®_ldo2>;
+ status = "okay";
+
+ button-200 {
+ label = "Setup";
+ linux,code = <KEY_SETUP>;
+ channel = <0>;
+ voltage = <190000>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <®_dcdc3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc_wifi>;
+ vqmmc-supply = <®_dcdc3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&pio {
+ vcc-pd-supply = <®_dcdc3>;
+ vcc-pe-supply = <®_ldo3>;
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd-sys-cpu-ephy";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_ldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "avdd-dovdd-2v8-csi";
+ regulator-soft-start;
+ regulator-ramp-delay = <1600>;
+};
+
+®_ldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "dvdd-1v8-csi";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_vbus-supply = <®_vcc5v0>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-v3.dtsi b/arch/arm/boot/dts/sun8i-v3.dtsi
index 6ae8645..ca4672e 100644
--- a/arch/arm/boot/dts/sun8i-v3.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3.dtsi
@@ -9,6 +9,19 @@ &ccu {
compatible = "allwinner,sun8i-v3-ccu";
};
+&emac {
+ /delete-property/ phy-handle;
+ /delete-property/ phy-mode;
+};
+
+&mdio_mux {
+ external_mdio: mdio@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
+
&pio {
compatible = "allwinner,sun8i-v3-pinctrl";
};
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index e531286..0c73416 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -43,12 +43,28 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun8i-v3s-ccu.h>
#include <dt-bindings/reset/sun8i-v3s-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&gic>;
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer-lcd {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "mixer0-lcd0";
+ clocks = <&display_clocks CLK_MIXER0>,
+ <&ccu CLK_TCON0>;
+ status = "disabled";
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -138,6 +154,15 @@ mixer0_out_tcon0: endpoint {
};
};
+ syscon: system-control@1c00000 {
+ compatible = "allwinner,sun8i-v3s-system-control",
+ "allwinner,sun8i-h3-system-control";
+ reg = <0x01c00000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ };
+
tcon0: lcd-controller@1c0c000 {
compatible = "allwinner,sun8i-v3s-tcon";
reg = <0x01c0c000 0x1000>;
@@ -234,6 +259,17 @@ mmc2: mmc@1c11000 {
#size-cells = <0>;
};
+ crypto@1c15000 {
+ compatible = "allwinner,sun8i-v3s-crypto",
+ "allwinner,sun8i-a33-crypto";
+ reg = <0x01c15000 0x1000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_CE>;
+ reset-names = "ahb";
+ };
+
usb_otg: usb@1c19000 {
compatible = "allwinner,sun8i-h3-musb";
reg = <0x01c19000 0x0400>;
@@ -292,16 +328,41 @@ pio: pinctrl@1c20800 {
interrupt-controller;
#interrupt-cells = <3>;
+ /omit-if-no-ref/
+ csi1_8bit_pins: csi1-8bit-pins {
+ pins = "PE0", "PE2", "PE3", "PE8", "PE9",
+ "PE10", "PE11", "PE12", "PE13", "PE14",
+ "PE15";
+ function = "csi";
+ };
+
+ /omit-if-no-ref/
+ csi1_mclk_pin: csi1-mclk-pin {
+ pins = "PE1";
+ function = "csi";
+ };
+
i2c0_pins: i2c0-pins {
pins = "PB6", "PB7";
function = "i2c0";
};
+ /omit-if-no-ref/
+ i2c1_pe_pins: i2c1-pe-pins {
+ pins = "PE21", "PE22";
+ function = "i2c1";
+ };
+
uart0_pb_pins: uart0-pb-pins {
pins = "PB8", "PB9";
function = "uart0";
};
+ uart2_pins: uart2-pins {
+ pins = "PB0", "PB1";
+ function = "uart2";
+ };
+
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
@@ -377,6 +438,8 @@ uart2: serial@1c28800 {
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART2>;
resets = <&ccu RST_BUS_UART2>;
+ pinctrl-0 = <&uart2_pins>;
+ pinctrl-names = "default";
status = "disabled";
};
@@ -404,6 +467,49 @@ i2c1: i2c@1c2b000 {
#size-cells = <0>;
};
+ emac: ethernet@1c30000 {
+ compatible = "allwinner,sun8i-v3s-emac";
+ syscon = <&syscon>;
+ reg = <0x01c30000 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ resets = <&ccu RST_BUS_EMAC>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu CLK_BUS_EMAC>;
+ clock-names = "stmmaceth";
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ status = "disabled";
+
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ };
+
+ mdio_mux: mdio-mux {
+ compatible = "allwinner,sun8i-h3-mdio-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio-parent-bus = <&mdio>;
+ /* Only one MDIO is usable at the time */
+ internal_mdio: mdio@1 {
+ compatible = "allwinner,sun8i-h3-mdio-internal";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ int_mii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ clocks = <&ccu CLK_BUS_EPHY>;
+ resets = <&ccu RST_BUS_EPHY>;
+ };
+ };
+ };
+ };
+
spi0: spi@1c68000 {
compatible = "allwinner,sun8i-h3-spi";
reg = <0x01c68000 0x1000>;
@@ -418,6 +524,18 @@ spi0: spi@1c68000 {
#size-cells = <0>;
};
+ csi1: camera@1cb4000 {
+ compatible = "allwinner,sun8i-v3s-csi";
+ reg = <0x01cb4000 0x3000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CSI>,
+ <&ccu CLK_CSI1_SCLK>,
+ <&ccu CLK_DRAM_CSI>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_CSI>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
diff --git a/arch/arm/boot/dts/tango4-common.dtsi b/arch/arm/boot/dts/tango4-common.dtsi
index 54fd522..d584da3 100644
--- a/arch/arm/boot/dts/tango4-common.dtsi
+++ b/arch/arm/boot/dts/tango4-common.dtsi
@@ -51,7 +51,7 @@ gic: interrupt-controller@1000 {
};
};
- l2cc: l2-cache-controller@20100000 {
+ l2cc: cache-controller@20100000 {
compatible = "arm,pl310-cache";
reg = <0x20100000 0x1000>;
cache-level = <2>;
diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
index 2d683c9..a0b8297 100644
--- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -14,6 +14,10 @@ / {
compatible = "acer,picasso", "nvidia,tegra20";
aliases {
+ mmc0 = &sdmmc4; /* eMMC */
+ mmc1 = &sdmmc3; /* MicroSD */
+ mmc2 = &sdmmc1; /* WiFi */
+
rtc0 = &pmic;
rtc1 = "/rtc@7000e000";
@@ -314,16 +318,24 @@ drive_ddc {
nvidia,pins = "drive_ddc",
"drive_vi1",
"drive_sdio1";
+ nvidia,pull-up-strength = <31>;
+ nvidia,pull-down-strength = <31>;
nvidia,schmitt = <TEGRA_PIN_ENABLE>;
- nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_4>;
+ nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
};
drive_dbg {
nvidia,pins = "drive_dbg",
"drive_vi2",
"drive_at1",
"drive_ao1";
+ nvidia,pull-up-strength = <31>;
+ nvidia,pull-down-strength = <31>;
nvidia,schmitt = <TEGRA_PIN_ENABLE>;
- nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_4>;
+ nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
};
@@ -431,8 +443,6 @@ touchscreen@4c {
compatible = "atmel,maxtouch";
reg = <0x4c>;
- atmel,cfg_name = "maxtouch-acer-iconia-tab-a500.cfg";
-
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>;
@@ -720,13 +730,17 @@ brcm_wifi_pwrseq: wifi-pwrseq {
power-off-delay-us = <300>;
};
- mmc@c8000000 {
+ sdmmc1: mmc@c8000000 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
- max-frequency = <25000000>;
+ assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+ assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
+ assigned-clock-rates = <50000000>;
+
+ max-frequency = <50000000>;
keep-power-in-suspend;
bus-width = <4>;
non-removable;
@@ -745,7 +759,7 @@ wifi@1 {
};
};
- mmc@c8000400 {
+ sdmmc3: mmc@c8000400 {
status = "okay";
bus-width = <4>;
cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
@@ -754,7 +768,7 @@ mmc@c8000400 {
vqmmc-supply = <&vdd_3v3_sys>;
};
- mmc@c8000600 {
+ sdmmc4: mmc@c8000600 {
status = "okay";
bus-width = <8>;
vmmc-supply = <&vcore_emmc>;
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
index 3922517..88ca03f 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
@@ -2,6 +2,7 @@
#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/power/summit,smb347-charger.h>
#include <dt-bindings/thermal/thermal.h>
#include "tegra30.dtsi"
@@ -10,6 +11,9 @@
/ {
aliases {
+ mmc0 = &sdmmc4; /* eMMC */
+ mmc1 = &sdmmc3; /* WiFi */
+
rtc0 = &pmic;
rtc1 = "/rtc@7000e000";
@@ -836,6 +840,24 @@ pwm: pwm@7000a000 {
i2c@7000c400 {
clock-frequency = <400000>;
status = "okay";
+
+ touchscreen@10 {
+ compatible ="elan,ektf3624";
+ reg = <0x10>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+ vcc33-supply = <&vcc_3v3_ts>;
+ vccio-supply = <&vcc_3v3_ts>;
+
+ touchscreen-size-x = <2112>;
+ touchscreen-size-y = <1280>;
+ touchscreen-swapped-x-y;
+ touchscreen-inverted-x;
+ };
};
i2c@7000c500 {
@@ -901,9 +923,24 @@ nct72: temperature-sensor@4c {
#thermal-sensor-cells = <1>;
};
- battery@55 {
+ fuel-gauge@55 {
compatible = "ti,bq27541";
reg = <0x55>;
+ power-supplies = <&power_supply>;
+ monitored-battery = <&battery_cell>;
+ };
+
+ power_supply: charger@6a {
+ compatible = "summit,smb347";
+ reg = <0x6a>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(V, 1) IRQ_TYPE_EDGE_BOTH>;
+
+ summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW>;
+ summit,enable-usb-charging;
+
+ monitored-battery = <&battery_cell>;
};
};
@@ -936,12 +973,17 @@ brcm_wifi_pwrseq: wifi-pwrseq {
power-off-delay-us = <300>;
};
- mmc@78000400 {
+ sdmmc3: mmc@78000400 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
+ assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+ assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+ assigned-clock-rates = <50000000>;
+
+ max-frequency = <50000000>;
keep-power-in-suspend;
bus-width = <4>;
non-removable;
@@ -960,7 +1002,7 @@ wifi@1 {
};
};
- mmc@78000600 {
+ sdmmc4: mmc@78000600 {
status = "okay";
bus-width = <8>;
vmmc-supply = <&vcore_emmc>;
@@ -993,6 +1035,12 @@ backlight: backlight {
default-brightness-level = <15>;
};
+ battery_cell: battery-cell {
+ compatible = "simple-battery";
+ constant-charge-current-max-microamp = <1800000>;
+ operating-range-celsius = <0 45>;
+ };
+
/* PMIC has a built-in 32KHz oscillator which is used by PMC */
clk32k_in: clock@0 {
compatible = "fixed-clock";
diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi
index dd6957b..70e5635 100644
--- a/arch/arm/boot/dts/tny_a9260_common.dtsi
+++ b/arch/arm/boot/dts/tny_a9260_common.dtsi
@@ -10,7 +10,7 @@ chosen {
bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock6 rw rootfstype=ubifs";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x4000000>;
};
diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts
index 2820635..62b7d9f 100644
--- a/arch/arm/boot/dts/tny_a9263.dts
+++ b/arch/arm/boot/dts/tny_a9263.dts
@@ -15,7 +15,7 @@ chosen {
bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x4000000>;
};
diff --git a/arch/arm/boot/dts/usb_a9260.dts b/arch/arm/boot/dts/usb_a9260.dts
index ec8cd86..6cfa839 100644
--- a/arch/arm/boot/dts/usb_a9260.dts
+++ b/arch/arm/boot/dts/usb_a9260.dts
@@ -16,7 +16,7 @@ chosen {
bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x4000000>;
};
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
index e7a705f..8a0cfbf 100644
--- a/arch/arm/boot/dts/usb_a9263.dts
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -15,7 +15,7 @@ chosen {
bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x4000000>;
};
diff --git a/arch/arm/boot/dts/usb_a9g20_common.dtsi b/arch/arm/boot/dts/usb_a9g20_common.dtsi
index adbe7502..7d10b36 100644
--- a/arch/arm/boot/dts/usb_a9g20_common.dtsi
+++ b/arch/arm/boot/dts/usb_a9g20_common.dtsi
@@ -14,7 +14,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@20000000 {
reg = <0x20000000 0x4000000>;
};
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index a88ee52..4f7220b 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -280,7 +280,7 @@ wdt@f0000 {
reg = <0x0f0000 0x1000>;
interrupts = <0>;
clocks = <&v2m_refclk32khz>, <&smbclk>;
- clock-names = "wdogclk", "apb_pclk";
+ clock-names = "wdog_clk", "apb_pclk";
};
v2m_timer01: timer@110000 {
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index 5e48b64..2ac41ed 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -198,7 +198,7 @@ wdt@f000 {
reg = <0x0f000 0x1000>;
interrupts = <0>;
clocks = <&v2m_refclk32khz>, <&smbclk>;
- clock-names = "wdogclk", "apb_pclk";
+ clock-names = "wdog_clk", "apb_pclk";
};
v2m_timer01: timer@11000 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index f82fa34..e63c5c0 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -87,8 +87,8 @@ wdt@2b060000 {
status = "disabled";
reg = <0 0x2b060000 0 0x1000>;
interrupts = <0 98 4>;
- clocks = <&sys_pll>;
- clock-names = "apb_pclk";
+ clocks = <&sys_pll>, <&sys_pll>;
+ clock-names = "wdog_clk", "apb_pclk";
};
gic: interrupt-controller@2c001000 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 3ac95a1..012d40a 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -128,7 +128,7 @@ wdt@2a490000 {
reg = <0 0x2a490000 0 0x1000>;
interrupts = <0 98 4>;
clocks = <&oscclk6a>, <&oscclk6a>;
- clock-names = "wdogclk", "apb_pclk";
+ clock-names = "wdog_clk", "apb_pclk";
};
hdlcd@2b000000 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index 623246f..4c58479 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -122,8 +122,8 @@ timer@100e4000 {
reg = <0x100e4000 0x1000>;
interrupts = <0 48 4>,
<0 49 4>;
- clocks = <&oscclk2>, <&oscclk2>;
- clock-names = "timclk", "apb_pclk";
+ clocks = <&oscclk2>, <&oscclk2>, <&oscclk2>;
+ clock-names = "timer0clk", "timer1clk", "apb_pclk";
status = "disabled";
};
@@ -132,7 +132,7 @@ watchdog@100e5000 {
reg = <0x100e5000 0x1000>;
interrupts = <0 51 4>;
clocks = <&oscclk2>, <&oscclk2>;
- clock-names = "wdogclk", "apb_pclk";
+ clock-names = "wdog_clk", "apb_pclk";
};
scu@1e000000 {
diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts
index 64e0e95..96495d9 100644
--- a/arch/arm/boot/dts/vf610-zii-cfu1.dts
+++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts
@@ -172,7 +172,6 @@ switch0: switch0@0 {
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;
- reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
ports {
#address-cells = <1>;
@@ -226,6 +225,7 @@ io-expander@22 {
compatible = "nxp,pca9554";
reg = <0x22>;
gpio-controller;
+ #gpio-cells = <2>;
};
lm75@48 {
@@ -356,7 +356,6 @@ VF610_PAD_PTE13__GPIO_118 0x3043
pinctrl_switch: switch-grp {
fsl,pins = <
VF610_PAD_PTB28__GPIO_98 0x3061
- VF610_PAD_PTE2__GPIO_107 0x1042
>;
};
diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts
index 9e5187b..6c6ec46 100644
--- a/arch/arm/boot/dts/vf610-zii-spb4.dts
+++ b/arch/arm/boot/dts/vf610-zii-spb4.dts
@@ -129,7 +129,6 @@ switch0: switch0@0 {
pinctrl-names = "default";
reg = <0>;
eeprom-length = <65536>;
- reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio3>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
@@ -326,7 +325,6 @@ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
fsl,pins = <
- VF610_PAD_PTE2__GPIO_107 0x31c2
VF610_PAD_PTB28__GPIO_98 0x219d
>;
};
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
index 569614b..73fdace 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
@@ -118,7 +118,6 @@ switch0: switch0@0 {
pinctrl-names = "default";
reg = <0>;
eeprom-length = <65536>;
- reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio3>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
@@ -293,7 +292,6 @@ VF610_PAD_PTB24__GPIO_94 0x219d
pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
fsl,pins = <
- VF610_PAD_PTE2__GPIO_107 0x31c2
VF610_PAD_PTB28__GPIO_98 0x219d
>;
};
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
index b6b0f30..fe600ab 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
@@ -143,7 +143,6 @@ switch0: switch0@0 {
pinctrl-names = "default";
reg = <0>;
eeprom-length = <65536>;
- reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio3>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
@@ -333,7 +332,6 @@ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
fsl,pins = <
- VF610_PAD_PTE2__GPIO_107 0x31c2
VF610_PAD_PTB28__GPIO_98 0x219d
>;
};
diff --git a/arch/arm/boot/dts/zx296702.dtsi b/arch/arm/boot/dts/zx296702.dtsi
index afd98de..f378c66 100644
--- a/arch/arm/boot/dts/zx296702.dtsi
+++ b/arch/arm/boot/dts/zx296702.dtsi
@@ -58,7 +58,7 @@ global_timer: timer@8000200 {
clocks = <&topclk ZX296702_A9_PERIPHCLK>;
};
- l2cc: l2-cache-controller@c00000 {
+ l2cc: cache-controller@c00000 {
compatible = "arm,pl310-cache";
reg = <0x00c00000 0x1000>;
cache-unified;
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index c98ebae..f89c1ea 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -22,7 +22,7 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
-#include <linux/dma-mapping.h>
+#include <linux/dma-map-ops.h>
#include <linux/clk.h>
#include <linux/io.h>
diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig
index 303f75a..58d293b 100644
--- a/arch/arm/configs/aspeed_g4_defconfig
+++ b/arch/arm/configs/aspeed_g4_defconfig
@@ -160,7 +160,8 @@
CONFIG_SENSORS_W83773G=y
CONFIG_WATCHDOG_SYSFS=y
CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_SUPPORT_FILTER=y
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_ASPEED=y
CONFIG_DRM=y
diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig
index b0d056d..047975e 100644
--- a/arch/arm/configs/aspeed_g5_defconfig
+++ b/arch/arm/configs/aspeed_g5_defconfig
@@ -128,6 +128,8 @@
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_IBM_PANEL=y
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
@@ -147,10 +149,12 @@
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_ASPEED=y
CONFIG_I2C_FSI=y
+CONFIG_I2C_SLAVE=y
CONFIG_SPI=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
@@ -175,7 +179,8 @@
CONFIG_SENSORS_W83773G=y
CONFIG_WATCHDOG_SYSFS=y
CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_SUPPORT_FILTER=y
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_ASPEED=y
CONFIG_DRM=y
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 6e8b5ff..cf82c9d 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -191,11 +191,14 @@
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS65090=y
CONFIG_REGULATOR_WM8994=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_CEC_SUPPORT=y
+CONFIG_CEC_SAMSUNG_S5P=m
+CONFIG_MEDIA_SUPPORT=m
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_V4L_PLATFORM_DRIVERS=y
@@ -210,9 +213,6 @@
CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIVID=m
-CONFIG_CEC_PLATFORM_DRIVERS=y
-CONFIG_CEC_SAMSUNG_S5P=m
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_VIDEO_S5K6A3=m
CONFIG_VIDEO_S5C73M3=m
CONFIG_DRM=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index f5f1111..aeb1209 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -20,9 +20,9 @@
CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_IMX27_VISSTRIM_M10=y
CONFIG_MACH_PCA100=y
-CONFIG_MACH_IMX27_DT=y
CONFIG_SOC_IMX1=y
CONFIG_SOC_IMX25=y
+CONFIG_SOC_IMX27=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 82d3ffb..0fa79bd 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -15,20 +15,8 @@
# CONFIG_COMPAT_BRK is not set
CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_MXC=y
-CONFIG_MACH_MX31LILLY=y
-CONFIG_MACH_MX31LITE=y
-CONFIG_MACH_PCM037=y
-CONFIG_MACH_PCM037_EET=y
-CONFIG_MACH_MX31_3DS=y
-CONFIG_MACH_MX31MOBOARD=y
-CONFIG_MACH_QONG=y
-CONFIG_MACH_ARMADILLO5X0=y
-CONFIG_MACH_KZM_ARM11_01=y
-CONFIG_MACH_IMX31_DT=y
-CONFIG_MACH_IMX35_DT=y
-CONFIG_MACH_PCM043=y
-CONFIG_MACH_MX35_3DS=y
-CONFIG_MACH_VPR200=y
+CONFIG_SOC_IMX31=y
+CONFIG_SOC_IMX35=y
CONFIG_SOC_IMX50=y
CONFIG_SOC_IMX51=y
CONFIG_SOC_IMX53=y
@@ -218,6 +206,9 @@
CONFIG_SPI_IMX=y
CONFIG_SPI_FSL_DSPI=y
CONFIG_PINCTRL_IMX8MM=y
+CONFIG_PINCTRL_IMX8MN=y
+CONFIG_PINCTRL_IMX8MP=y
+CONFIG_PINCTRL_IMX8MQ=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_SIOX=m
CONFIG_GPIO_MAX732X=y
@@ -407,6 +398,9 @@
CONFIG_VIDEO_IMX_MEDIA=y
CONFIG_COMMON_CLK_PWM=y
CONFIG_CLK_IMX8MM=y
+CONFIG_CLK_IMX8MN=y
+CONFIG_CLK_IMX8MP=y
+CONFIG_CLK_IMX8MQ=y
CONFIG_SOC_IMX8M=y
CONFIG_IIO=y
CONFIG_MMA8452=y
diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index 2724fb3..70b709a 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -29,8 +29,8 @@
CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_IMX27_VISSTRIM_M10=y
CONFIG_MACH_PCA100=y
-CONFIG_MACH_IMX27_DT=y
CONFIG_SOC_IMX25=y
+CONFIG_SOC_IMX27=y
CONFIG_ARCH_MVEBU=y
CONFIG_MACH_KIRKWOOD=y
CONFIG_ARCH_ORION5X=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index e9e76e3..e731cdf 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -43,10 +43,12 @@
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SLL=y
CONFIG_SOC_IMX6SX=y
CONFIG_SOC_IMX6UL=y
CONFIG_SOC_LS1021A=y
CONFIG_SOC_IMX7D=y
+CONFIG_SOC_IMX7ULP=y
CONFIG_SOC_VF610=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARCH_MEDIATEK=y
@@ -182,7 +184,7 @@
CONFIG_PCI_MVEBU=y
CONFIG_PCI_TEGRA=y
CONFIG_PCI_RCAR_GEN2=y
-CONFIG_PCIE_RCAR=y
+CONFIG_PCIE_RCAR_HOST=y
CONFIG_PCI_DRA7XX_EP=y
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
@@ -1011,6 +1013,7 @@
CONFIG_EXTCON_MAX77693=m
CONFIG_EXTCON_MAX8997=m
CONFIG_TI_AEMIF=y
+CONFIG_STM32_FMC2_EBI=y
CONFIG_EXYNOS5422_DMC=m
CONFIG_IIO=y
CONFIG_IIO_SW_TRIGGER=y
@@ -1121,6 +1124,7 @@
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_USER_API_AEAD=m
CONFIG_CRYPTO_DEV_SUN4I_SS=m
+CONFIG_CRYPTO_DEV_FSL_CAAM=m
CONFIG_CRYPTO_DEV_MARVELL_CESA=m
CONFIG_CRYPTO_DEV_EXYNOS_RNG=m
CONFIG_CRYPTO_DEV_S5P=m
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index fe383f5..34793aa 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -95,7 +95,18 @@
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NETFILTER=y
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_VLAN_8021Q=m
CONFIG_PHONET=m
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_CLS_U32=m
+CONFIG_NET_CLS_FLOWER=m
+CONFIG_NET_CLS_MATCHALL=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
CONFIG_NET_SWITCHDEV=y
CONFIG_CAN=m
CONFIG_CAN_C_CAN=m
@@ -510,6 +521,7 @@
CONFIG_CPCAP_ADC=m
CONFIG_INA2XX_ADC=m
CONFIG_TI_AM335X_ADC=m
+CONFIG_TWL4030_MADC=m
CONFIG_SENSORS_ISL29028=m
CONFIG_BMP280=m
CONFIG_PWM=y
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index 70e2c74..483c400 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -5,9 +5,6 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_REALVIEW=y
CONFIG_MACH_REALVIEW_EB=y
@@ -20,11 +17,12 @@
CONFIG_MACH_REALVIEW_PBA8=y
CONFIG_MACH_REALVIEW_PBX=y
CONFIG_SMP=y
-CONFIG_CMA=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
CONFIG_VFP=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -59,8 +57,12 @@
CONFIG_SPI=y
CONFIG_GPIOLIB=y
# CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_DISPLAY_CONNECTOR=y
+CONFIG_DRM_SIMPLE_BRIDGE=y
CONFIG_DRM_PL111=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
@@ -78,6 +80,7 @@
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_CPU=y
@@ -93,10 +96,9 @@
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index bbedc42..4a161b3 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -37,7 +37,7 @@
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_RCAR_GEN2=y
-CONFIG_PCIE_RCAR=y
+CONFIG_PCIE_RCAR_HOST=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_SIMPLE_PM_BUS=y
@@ -64,6 +64,7 @@
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_ST1232=y
+CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_DA9063_ONKEY=y
CONFIG_INPUT_ADXL34X=y
@@ -104,6 +105,7 @@
CONFIG_RENESAS_RZAWDT=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_DA9063=y
+CONFIG_MFD_STMPE=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_DA9210=y
@@ -134,7 +136,6 @@
CONFIG_DRM_I2C_ADV7511=y
CONFIG_DRM_I2C_ADV7511_AUDIO=y
CONFIG_FB_SH_MOBILE_LCDC=y
-# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_AS3711=y
CONFIG_SOUND=y
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index 76793533..e7ecfb3 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -9,8 +9,6 @@
CONFIG_ARCH_VERSATILE=y
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=1f03 mem=32M"
CONFIG_FPE_NWFPE=y
CONFIG_VFP=y
@@ -59,6 +57,7 @@
CONFIG_DRM=y
CONFIG_DRM_PANEL_ARM_VERSATILE=y
CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_DISPLAY_CONNECTOR=y
CONFIG_DRM_SIMPLE_BRIDGE=y
CONFIG_DRM_PL111=y
CONFIG_FB_MODE_HELPERS=y
@@ -91,8 +90,8 @@
CONFIG_NLS_ISO8859_1=m
CONFIG_FONTS=y
CONFIG_FONT_ACORN_8x8=y
-CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S
index 7ffe669..0ff32ff 100644
--- a/arch/arm/include/debug/brcmstb.S
+++ b/arch/arm/include/debug/brcmstb.S
@@ -32,6 +32,8 @@
#define UARTA_7271 UARTA_7268
#define UARTA_7278 REG_PHYS_ADDR_V7(0x40c000)
#define UARTA_7216 UARTA_7278
+#define UARTA_72164 UARTA_7278
+#define UARTA_72165 UARTA_7278
#define UARTA_7364 REG_PHYS_ADDR(0x40b000)
#define UARTA_7366 UARTA_7364
#define UARTA_74371 REG_PHYS_ADDR(0x406b00)
@@ -84,17 +86,19 @@
/* Chip specific detection starts here */
20: checkuart(\rp, \rv, 0x33900000, 3390)
21: checkuart(\rp, \rv, 0x72160000, 7216)
-22: checkuart(\rp, \rv, 0x72500000, 7250)
-23: checkuart(\rp, \rv, 0x72550000, 7255)
-24: checkuart(\rp, \rv, 0x72600000, 7260)
-25: checkuart(\rp, \rv, 0x72680000, 7268)
-26: checkuart(\rp, \rv, 0x72710000, 7271)
-27: checkuart(\rp, \rv, 0x72780000, 7278)
-28: checkuart(\rp, \rv, 0x73640000, 7364)
-29: checkuart(\rp, \rv, 0x73660000, 7366)
-30: checkuart(\rp, \rv, 0x07437100, 74371)
-31: checkuart(\rp, \rv, 0x74390000, 7439)
-32: checkuart(\rp, \rv, 0x74450000, 7445)
+22: checkuart(\rp, \rv, 0x07216400, 72164)
+23: checkuart(\rp, \rv, 0x07216500, 72165)
+24: checkuart(\rp, \rv, 0x72500000, 7250)
+25: checkuart(\rp, \rv, 0x72550000, 7255)
+26: checkuart(\rp, \rv, 0x72600000, 7260)
+27: checkuart(\rp, \rv, 0x72680000, 7268)
+28: checkuart(\rp, \rv, 0x72710000, 7271)
+29: checkuart(\rp, \rv, 0x72780000, 7278)
+30: checkuart(\rp, \rv, 0x73640000, 7364)
+31: checkuart(\rp, \rv, 0x73660000, 7366)
+32: checkuart(\rp, \rv, 0x07437100, 74371)
+33: checkuart(\rp, \rv, 0x74390000, 7439)
+34: checkuart(\rp, \rv, 0x74450000, 7445)
/* No valid UART found */
90: mov \rp, #0
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 2aab043..120f9aa 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -51,10 +51,11 @@ static struct at91_soc_pm soc_pm = {
};
static const match_table_t pm_modes __initconst = {
- { AT91_PM_STANDBY, "standby" },
- { AT91_PM_ULP0, "ulp0" },
- { AT91_PM_ULP1, "ulp1" },
- { AT91_PM_BACKUP, "backup" },
+ { AT91_PM_STANDBY, "standby" },
+ { AT91_PM_ULP0, "ulp0" },
+ { AT91_PM_ULP0_FAST, "ulp0-fast" },
+ { AT91_PM_ULP1, "ulp1" },
+ { AT91_PM_BACKUP, "backup" },
{ -1, NULL },
};
@@ -557,11 +558,6 @@ static void at91rm9200_idle(void)
writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR);
}
-static void at91sam9x60_idle(void)
-{
- cpu_do_idle();
-}
-
static void at91sam9_idle(void)
{
writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR);
@@ -789,6 +785,51 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = {
{ /* sentinel */ },
};
+static void __init at91_pm_modes_validate(const int *modes, int len)
+{
+ u8 i, standby = 0, suspend = 0;
+ int mode;
+
+ for (i = 0; i < len; i++) {
+ if (standby && suspend)
+ break;
+
+ if (modes[i] == soc_pm.data.standby_mode && !standby) {
+ standby = 1;
+ continue;
+ }
+
+ if (modes[i] == soc_pm.data.suspend_mode && !suspend) {
+ suspend = 1;
+ continue;
+ }
+ }
+
+ if (!standby) {
+ if (soc_pm.data.suspend_mode == AT91_PM_STANDBY)
+ mode = AT91_PM_ULP0;
+ else
+ mode = AT91_PM_STANDBY;
+
+ pr_warn("AT91: PM: %s mode not supported! Using %s.\n",
+ pm_modes[soc_pm.data.standby_mode].pattern,
+ pm_modes[mode].pattern);
+ soc_pm.data.standby_mode = mode;
+ }
+
+ if (!suspend) {
+ if (soc_pm.data.standby_mode == AT91_PM_ULP0)
+ mode = AT91_PM_STANDBY;
+ else
+ mode = AT91_PM_ULP0;
+
+ pr_warn("AT91: PM: %s mode not supported! Using %s.\n",
+ pm_modes[soc_pm.data.suspend_mode].pattern,
+ pm_modes[mode].pattern);
+ soc_pm.data.suspend_mode = mode;
+ }
+}
+
static void __init at91_pm_init(void (*pm_idle)(void))
{
struct device_node *pmc_np;
@@ -800,6 +841,7 @@ static void __init at91_pm_init(void (*pm_idle)(void))
pmc_np = of_find_matching_node_and_match(NULL, atmel_pmc_ids, &of_id);
soc_pm.data.pmc = of_iomap(pmc_np, 0);
+ of_node_put(pmc_np);
if (!soc_pm.data.pmc) {
pr_err("AT91: PM not supported, PMC not found\n");
return;
@@ -830,6 +872,14 @@ void __init at91rm9200_pm_init(void)
if (!IS_ENABLED(CONFIG_SOC_AT91RM9200))
return;
+ /*
+ * Force STANDBY and ULP0 mode to avoid calling
+ * at91_pm_modes_validate() which may increase booting time.
+ * Platform supports anyway only STANDBY and ULP0 modes.
+ */
+ soc_pm.data.standby_mode = AT91_PM_STANDBY;
+ soc_pm.data.suspend_mode = AT91_PM_ULP0;
+
at91_dt_ramc();
/*
@@ -842,12 +892,17 @@ void __init at91rm9200_pm_init(void)
void __init sam9x60_pm_init(void)
{
+ static const int modes[] __initconst = {
+ AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
+ };
+
if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
return;
+ at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
at91_pm_modes_init();
at91_dt_ramc();
- at91_pm_init(at91sam9x60_idle);
+ at91_pm_init(NULL);
soc_pm.ws_ids = sam9x60_ws_ids;
soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
@@ -858,26 +913,46 @@ void __init at91sam9_pm_init(void)
if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
return;
+ /*
+ * Force STANDBY and ULP0 mode to avoid calling
+ * at91_pm_modes_validate() which may increase booting time.
+ * Platform supports anyway only STANDBY and ULP0 modes.
+ */
+ soc_pm.data.standby_mode = AT91_PM_STANDBY;
+ soc_pm.data.suspend_mode = AT91_PM_ULP0;
+
at91_dt_ramc();
at91_pm_init(at91sam9_idle);
}
void __init sama5_pm_init(void)
{
+ static const int modes[] __initconst = {
+ AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST,
+ };
+
if (!IS_ENABLED(CONFIG_SOC_SAMA5))
return;
+ at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
at91_dt_ramc();
at91_pm_init(NULL);
}
void __init sama5d2_pm_init(void)
{
+ static const int modes[] __initconst = {
+ AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
+ AT91_PM_BACKUP,
+ };
+
if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
return;
+ at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
at91_pm_modes_init();
- sama5_pm_init();
+ at91_dt_ramc();
+ at91_pm_init(NULL);
soc_pm.ws_ids = sama5d2_ws_ids;
soc_pm.config_shdwc_ws = at91_sama5d2_config_shdwc_ws;
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 218e8d1..bfb260b 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -19,8 +19,9 @@
#define AT91_PM_STANDBY 0x00
#define AT91_PM_ULP0 0x01
-#define AT91_PM_ULP1 0x02
-#define AT91_PM_BACKUP 0x03
+#define AT91_PM_ULP0_FAST 0x02
+#define AT91_PM_ULP1 0x03
+#define AT91_PM_BACKUP 0x04
#ifndef __ASSEMBLY__
struct at91_pm_data {
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index be9764e..0184de0 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -164,7 +164,22 @@
.macro at91_pm_ulp0_mode
ldr pmc, .pmc_base
+ ldr tmp2, .pm_mode
+ ldr tmp3, .mckr_offset
+ /* Check if ULP0 fast variant has been requested. */
+ cmp tmp2, #AT91_PM_ULP0_FAST
+ bne 0f
+
+ /* Set highest prescaler for power saving */
+ ldr tmp1, [pmc, tmp3]
+ bic tmp1, tmp1, #AT91_PMC_PRES
+ orr tmp1, tmp1, #AT91_PMC_PRES_64
+ str tmp1, [pmc, tmp3]
+ wait_mckrdy
+ b 1f
+
+0:
/* Turn off the crystal oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
bic tmp1, tmp1, #AT91_PMC_MOSCEN
@@ -192,7 +207,18 @@
/* Wait for interrupt */
1: at91_cpu_idle
- /* Restore RC oscillator state */
+ /* Check if ULP0 fast variant has been requested. */
+ cmp tmp2, #AT91_PM_ULP0_FAST
+ bne 5f
+
+ /* Set lowest prescaler for fast resume. */
+ ldr tmp1, [pmc, tmp3]
+ bic tmp1, tmp1, #AT91_PMC_PRES
+ str tmp1, [pmc, tmp3]
+ wait_mckrdy
+ b 6f
+
+5: /* Restore RC oscillator state */
ldr tmp1, .saved_osc_status
tst tmp1, #AT91_PMC_MOSCRCS
beq 4f
@@ -216,6 +242,7 @@
str tmp1, [pmc, #AT91_CKGR_MOR]
wait_moscrdy
+6:
.endm
/**
@@ -473,23 +500,29 @@
ENTRY(at91_ulp_mode)
ldr pmc, .pmc_base
ldr tmp2, .mckr_offset
+ ldr tmp3, .pm_mode
/* Save Master clock setting */
ldr tmp1, [pmc, tmp2]
str tmp1, .saved_mckr
/*
- * Set the Master clock source to slow clock
+ * Set master clock source to:
+ * - MAINCK if using ULP0 fast variant
+ * - slow clock, otherwise
*/
bic tmp1, tmp1, #AT91_PMC_CSS
+ cmp tmp3, #AT91_PM_ULP0_FAST
+ bne save_mck
+ orr tmp1, tmp1, #AT91_PMC_CSS_MAIN
+save_mck:
str tmp1, [pmc, tmp2]
wait_mckrdy
at91_plla_disable
- ldr r0, .pm_mode
- cmp r0, #AT91_PM_ULP1
+ cmp tmp3, #AT91_PM_ULP1
beq ulp1_mode
at91_pm_ulp0_mode
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 1df0ee0..ae79090 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -208,6 +208,7 @@
select ARM_GIC
select ARM_ERRATA_798181 if SMP
select HAVE_ARM_ARCH_TIMER
+ select BCM7038_L1_IRQ
select BRCMSTB_L2_IRQ
select BCM7120_L2_IRQ
select ARCH_HAS_HOLES_MEMORYMODEL
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index bcb3c40..7755ccc 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -548,8 +548,7 @@ static const struct property_entry eeprom_properties[] = {
*/
static struct i2c_client *dm6446evm_msp;
-static int dm6446evm_msp_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int dm6446evm_msp_probe(struct i2c_client *client)
{
dm6446evm_msp = client;
return 0;
@@ -569,7 +568,7 @@ static const struct i2c_device_id dm6446evm_msp_ids[] = {
static struct i2c_driver dm6446evm_msp_driver = {
.driver.name = "dm6446evm_msp",
.id_table = dm6446evm_msp_ids,
- .probe = dm6446evm_msp_probe,
+ .probe_new = dm6446evm_msp_probe,
.remove = dm6446evm_msp_remove,
};
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 8319a60..952ddab 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -160,8 +160,7 @@ static struct platform_device davinci_aemif_device = {
#define DM646X_EVM_ATA_PWD BIT(1)
/* CPLD Register 0 Client: used for I/O Control */
-static int cpld_reg0_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int cpld_reg0_probe(struct i2c_client *client)
{
if (HAS_ATA) {
u8 data;
@@ -197,7 +196,7 @@ static const struct i2c_device_id cpld_reg_ids[] = {
static struct i2c_driver dm6467evm_cpld_driver = {
.driver.name = "cpld_reg0",
.id_table = cpld_reg_ids,
- .probe = cpld_reg0_probe,
+ .probe_new = cpld_reg0_probe,
};
/* LEDS */
@@ -397,8 +396,7 @@ static struct snd_platform_data dm646x_evm_snd_data[] = {
#ifdef CONFIG_I2C
static struct i2c_client *cpld_client;
-static int cpld_video_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int cpld_video_probe(struct i2c_client *client)
{
cpld_client = client;
return 0;
@@ -419,7 +417,7 @@ static struct i2c_driver cpld_video_driver = {
.driver = {
.name = "cpld_video",
},
- .probe = cpld_video_probe,
+ .probe_new = cpld_video_probe,
.remove = cpld_video_remove,
.id_table = cpld_video_id,
};
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index f185cd3..d2d2497 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -24,7 +24,6 @@
select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5
select HAVE_ARM_SCU if SMP
select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select PINCTRL
select PINCTRL_EXYNOS
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 0fd3fcf..53fa363 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -3,10 +3,6 @@
# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
# http://www.samsung.com/
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
-
-# Core
-
obj-$(CONFIG_ARCH_EXYNOS) += exynos.o exynos-smc.o firmware.o
obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index afd988a..29eb075 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -24,12 +24,12 @@
#define EXYNOS5800_SOC_ID 0xE5422000
#define EXYNOS5_SOC_MASK 0xFFFFF000
-extern unsigned long samsung_cpu_id;
+extern unsigned long exynos_cpu_id;
#define IS_SAMSUNG_CPU(name, id, mask) \
static inline int is_samsung_##name(void) \
{ \
- return ((samsung_cpu_id & mask) == (id & mask)); \
+ return ((exynos_cpu_id & mask) == (id & mask)); \
}
IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK)
@@ -147,7 +147,7 @@ extern struct cpuidle_exynos_data cpuidle_coupled_exynos_data;
extern void exynos_set_delayed_reset_assertion(bool enable);
-extern unsigned int samsung_rev(void);
+extern unsigned int exynos_rev(void);
extern void exynos_core_restart(u32 core_id);
extern int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr);
extern int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr);
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 36c3744..700763e 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -19,11 +19,12 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/map.h>
-#include <plat/cpu.h>
-
#include "common.h"
+#define S3C_ADDR_BASE 0xF6000000
+#define S3C_ADDR(x) ((void __iomem __force *)S3C_ADDR_BASE + (x))
+#define S5P_VA_CHIPID S3C_ADDR(0x02000000)
+
static struct platform_device exynos_cpuidle = {
.name = "exynos_cpuidle",
#ifdef CONFIG_ARM_EXYNOS_CPUIDLE
@@ -36,6 +37,14 @@ void __iomem *sysram_base_addr __ro_after_init;
phys_addr_t sysram_base_phys __ro_after_init;
void __iomem *sysram_ns_base_addr __ro_after_init;
+unsigned long exynos_cpu_id;
+static unsigned int exynos_cpu_rev;
+
+unsigned int exynos_rev(void)
+{
+ return exynos_cpu_rev;
+}
+
void __init exynos_sysram_init(void)
{
struct device_node *node;
@@ -86,7 +95,11 @@ static void __init exynos_init_io(void)
of_scan_flat_dt(exynos_fdt_map_chipid, NULL);
/* detect cpu id and rev. */
- s5p_init_cpu(S5P_VA_CHIPID);
+ exynos_cpu_id = readl_relaxed(S5P_VA_CHIPID);
+ exynos_cpu_rev = exynos_cpu_id & 0xFF;
+
+ pr_info("Samsung CPU ID: 0x%08lx\n", exynos_cpu_id);
+
}
/*
@@ -193,8 +206,8 @@ static void __init exynos_dt_fixup(void)
}
DT_MACHINE_START(EXYNOS_DT, "Samsung Exynos (Flattened Device Tree)")
- .l2c_aux_val = 0x3c400000,
- .l2c_aux_mask = 0xc20fffff,
+ .l2c_aux_val = 0x38400000,
+ .l2c_aux_mask = 0xc60fffff,
.smp = smp_ops(exynos_smp_ops),
.map_io = exynos_init_io,
.init_early = exynos_firmware_init,
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
deleted file mode 100644
index 8d58faa..0000000
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Exynos - Memory map definitions
- */
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-
-#include <plat/map-s5p.h>
-
-#define EXYNOS_PA_CHIPID 0x10000000
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 0cbbae8..d7fedbb 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -22,8 +22,6 @@
#include <asm/smp_scu.h>
#include <asm/firmware.h>
-#include <mach/map.h>
-
#include "common.h"
extern void exynos4_secondary_startup(void);
@@ -188,7 +186,7 @@ void exynos_scu_enable(void)
static void __iomem *cpu_boot_reg_base(void)
{
- if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
+ if (soc_is_exynos4210() && exynos_rev() == EXYNOS4210_REV_1_1)
return pmu_base_addr + S5P_INFORM5;
return sysram_base_addr;
}
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 78af34c..30f4e55 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -26,18 +26,18 @@
static inline void __iomem *exynos_boot_vector_addr(void)
{
- if (samsung_rev() == EXYNOS4210_REV_1_1)
+ if (exynos_rev() == EXYNOS4210_REV_1_1)
return pmu_base_addr + S5P_INFORM7;
- else if (samsung_rev() == EXYNOS4210_REV_1_0)
+ else if (exynos_rev() == EXYNOS4210_REV_1_0)
return sysram_base_addr + 0x24;
return pmu_base_addr + S5P_INFORM0;
}
static inline void __iomem *exynos_boot_vector_flag(void)
{
- if (samsung_rev() == EXYNOS4210_REV_1_1)
+ if (exynos_rev() == EXYNOS4210_REV_1_1)
return pmu_base_addr + S5P_INFORM6;
- else if (samsung_rev() == EXYNOS4210_REV_1_0)
+ else if (exynos_rev() == EXYNOS4210_REV_1_0)
return sysram_base_addr + 0x20;
return pmu_base_addr + S5P_INFORM1;
}
diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
index 3b010fe..2e980f8 100644
--- a/arch/arm/mach-hisi/Kconfig
+++ b/arch/arm/mach-hisi/Kconfig
@@ -1,9 +1,9 @@
# SPDX-License-Identifier: GPL-2.0-only
config ARCH_HISI
bool "Hisilicon SoC Support"
- depends on ARCH_MULTI_V7
+ depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
select ARM_AMBA
- select ARM_GIC
+ select ARM_GIC if ARCH_MULTI_V7
select ARM_TIMER_SP804
select POWER_RESET
select POWER_RESET_HISI
@@ -15,6 +15,7 @@
config ARCH_HI3xxx
bool "Hisilicon Hi36xx family"
+ depends on ARCH_MULTI_V7
select CACHE_L2X0
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
@@ -25,6 +26,7 @@
config ARCH_HIP01
bool "Hisilicon HIP01 family"
+ depends on ARCH_MULTI_V7
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select ARM_GLOBAL_TIMER
@@ -33,6 +35,7 @@
config ARCH_HIP04
bool "Hisilicon HiP04 Cortex A15 family"
+ depends on ARCH_MULTI_V7
select ARM_ERRATA_798181 if SMP
select HAVE_ARM_ARCH_TIMER
select MCPM if SMP
@@ -43,6 +46,7 @@
config ARCH_HIX5HD2
bool "Hisilicon X5HD2 family"
+ depends on ARCH_MULTI_V7
select CACHE_L2X0
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
@@ -50,6 +54,14 @@
select PINCTRL_SINGLE
help
Support for Hisilicon HIX5HD2 SoC family
+
+config ARCH_SD5203
+ bool "Hisilicon SD5203 family"
+ depends on ARCH_MULTI_V5
+ select DW_APB_ICTL
+ help
+ Support for Hisilicon SD5203 SoC family
+
endmenu
endif
diff --git a/arch/arm/mach-imx/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c
deleted file mode 100644
index 0e01800..0000000
--- a/arch/arm/mach-imx/3ds_debugboard.c
+++ /dev/null
@@ -1,207 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/smsc911x.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include "3ds_debugboard.h"
-#include "hardware.h"
-
-/* LAN9217 ethernet base address */
-#define LAN9217_BASE_ADDR(n) (n + 0x0)
-/* External UART */
-#define UARTA_BASE_ADDR(n) (n + 0x8000)
-#define UARTB_BASE_ADDR(n) (n + 0x10000)
-
-#define BOARD_IO_ADDR(n) (n + 0x20000)
-/* LED switchs */
-#define LED_SWITCH_REG 0x00
-/* buttons */
-#define SWITCH_BUTTONS_REG 0x08
-/* status, interrupt */
-#define INTR_STATUS_REG 0x10
-#define INTR_MASK_REG 0x38
-#define INTR_RESET_REG 0x20
-/* magic word for debug CPLD */
-#define MAGIC_NUMBER1_REG 0x40
-#define MAGIC_NUMBER2_REG 0x48
-/* CPLD code version */
-#define CPLD_CODE_VER_REG 0x50
-/* magic word for debug CPLD */
-#define MAGIC_NUMBER3_REG 0x58
-/* module reset register*/
-#define MODULE_RESET_REG 0x60
-/* CPU ID and Personality ID */
-#define MCU_BOARD_ID_REG 0x68
-
-#define MXC_MAX_EXP_IO_LINES 16
-
-/* interrupts like external uart , external ethernet etc*/
-#define EXPIO_INT_ENET 0
-#define EXPIO_INT_XUART_A 1
-#define EXPIO_INT_XUART_B 2
-#define EXPIO_INT_BUTTON_A 3
-#define EXPIO_INT_BUTTON_B 4
-
-static void __iomem *brd_io;
-static struct irq_domain *domain;
-
-static struct resource smsc911x_resources[] = {
- {
- .flags = IORESOURCE_MEM,
- } , {
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
-};
-
-static struct platform_device smsc_lan9217_device = {
- .name = "smsc911x",
- .id = -1,
- .dev = {
- .platform_data = &smsc911x_config,
- },
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
-};
-
-static void mxc_expio_irq_handler(struct irq_desc *desc)
-{
- u32 imr_val;
- u32 int_valid;
- u32 expio_irq;
-
- /* irq = gpio irq number */
- desc->irq_data.chip->irq_mask(&desc->irq_data);
-
- imr_val = imx_readw(brd_io + INTR_MASK_REG);
- int_valid = imx_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
-
- expio_irq = 0;
- for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
- if ((int_valid & 1) == 0)
- continue;
- generic_handle_irq(irq_find_mapping(domain, expio_irq));
- }
-
- desc->irq_data.chip->irq_ack(&desc->irq_data);
- desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-/*
- * Disable an expio pin's interrupt by setting the bit in the imr.
- * Irq is an expio virtual irq number
- */
-static void expio_mask_irq(struct irq_data *d)
-{
- u16 reg;
- u32 expio = d->hwirq;
-
- reg = imx_readw(brd_io + INTR_MASK_REG);
- reg |= (1 << expio);
- imx_writew(reg, brd_io + INTR_MASK_REG);
-}
-
-static void expio_ack_irq(struct irq_data *d)
-{
- u32 expio = d->hwirq;
-
- imx_writew(1 << expio, brd_io + INTR_RESET_REG);
- imx_writew(0, brd_io + INTR_RESET_REG);
- expio_mask_irq(d);
-}
-
-static void expio_unmask_irq(struct irq_data *d)
-{
- u16 reg;
- u32 expio = d->hwirq;
-
- reg = imx_readw(brd_io + INTR_MASK_REG);
- reg &= ~(1 << expio);
- imx_writew(reg, brd_io + INTR_MASK_REG);
-}
-
-static struct irq_chip expio_irq_chip = {
- .irq_ack = expio_ack_irq,
- .irq_mask = expio_mask_irq,
- .irq_unmask = expio_unmask_irq,
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-int __init mxc_expio_init(u32 base, u32 intr_gpio)
-{
- u32 p_irq = gpio_to_irq(intr_gpio);
- int irq_base;
- int i;
-
- brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K);
- if (brd_io == NULL)
- return -ENOMEM;
-
- if ((imx_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) ||
- (imx_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) ||
- (imx_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) {
- pr_info("3-Stack Debug board not detected\n");
- iounmap(brd_io);
- brd_io = NULL;
- return -ENODEV;
- }
-
- pr_info("3-Stack Debug board detected, rev = 0x%04X\n",
- readw(brd_io + CPLD_CODE_VER_REG));
-
- /*
- * Configure INT line as GPIO input
- */
- gpio_request(intr_gpio, "expio_pirq");
- gpio_direction_input(intr_gpio);
-
- /* disable the interrupt and clear the status */
- imx_writew(0, brd_io + INTR_MASK_REG);
- imx_writew(0xFFFF, brd_io + INTR_RESET_REG);
- imx_writew(0, brd_io + INTR_RESET_REG);
- imx_writew(0x1F, brd_io + INTR_MASK_REG);
-
- irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
- WARN_ON(irq_base < 0);
-
- domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0,
- &irq_domain_simple_ops, NULL);
- WARN_ON(!domain);
-
- for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) {
- irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
- irq_clear_status_flags(i, IRQ_NOREQUEST);
- }
- irq_set_irq_type(p_irq, IRQF_TRIGGER_LOW);
- irq_set_chained_handler(p_irq, mxc_expio_irq_handler);
-
- /* Register Lan device on the debugboard */
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- smsc911x_resources[0].start = LAN9217_BASE_ADDR(base);
- smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1;
- smsc911x_resources[1].start = irq_find_mapping(domain, EXPIO_INT_ENET);
- smsc911x_resources[1].end = irq_find_mapping(domain, EXPIO_INT_ENET);
- platform_device_register(&smsc_lan9217_device);
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/3ds_debugboard.h b/arch/arm/mach-imx/3ds_debugboard.h
deleted file mode 100644
index a4d04d0..0000000
--- a/arch/arm/mach-imx/3ds_debugboard.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-#ifndef __ASM_ARCH_MXC_3DS_DB_H__
-#define __ASM_ARCH_MXC_3DS_DB_H__
-
-extern int __init mxc_expio_init(u32 base, u32 intr_gpio);
-
-#endif /* __ASM_ARCH_MXC_3DS_DB_H__ */
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index e7d7b90..5290278 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -47,371 +47,26 @@
def_bool y if SMP
select ARCH_HAS_RESET_CONTROLLER
-config IMX_HAVE_IOMUX_V1
- bool
-
-config ARCH_MXC_IOMUX_V3
- bool
-
-config SOC_IMX21
- bool
- select CPU_ARM926T
- select IMX_HAVE_IOMUX_V1
- select MXC_AVIC
-
-config SOC_IMX27
- bool
- select CPU_ARM926T
- select IMX_HAVE_IOMUX_V1
- select MXC_AVIC
- select PINCTRL_IMX27
-
-config SOC_IMX31
- bool
- select CPU_V6
- select MXC_AVIC
-
-config SOC_IMX35
- bool
- select ARCH_MXC_IOMUX_V3
- select MXC_AVIC
- select PINCTRL_IMX35
-
-if ARCH_MULTI_V5
-
-comment "MX21 platforms:"
-
-config MACH_MX21ADS
- bool "MX21ADS platform"
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select SOC_IMX21
- help
- Include support for MX21ADS platform. This includes specific
- configurations for the board and its peripherals.
-
-comment "MX27 platforms:"
-
-config MACH_MX27ADS
- bool "MX27ADS platform"
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_MXC_W1
- select SOC_IMX27
- help
- Include support for MX27ADS platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX27_3DS
- bool "MX27PDK platform"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_KEYPAD
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MX2_CAMERA
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_DEBUG_BOARD
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX27
- help
- Include support for MX27PDK platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_IMX27_VISSTRIM_M10
- bool "Vista Silicon i.MX27 Visstrim_m10"
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MX2_CAMERA
- select IMX_HAVE_PLATFORM_MX2_EMMA
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select LEDS_GPIO_REGISTER
- select SOC_IMX27
- help
- Include support for Visstrim_m10 platform and its different variants.
- This includes specific configurations for the board and its
- peripherals.
-
-config MACH_PCA100
- bool "Phytec phyCARD-s (pca100)"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_MXC_W1
- select IMX_HAVE_PLATFORM_SPI_IMX
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX27
- help
- Include support for phyCARD-s (aka pca100) platform. This
- includes specific configurations for the module and its peripherals.
-
-config MACH_IMX27_DT
- bool "Support i.MX27 platforms from device tree"
- select SOC_IMX27
- help
- Include support for Freescale i.MX27 based platforms
- using the device tree for discovery
-
-endif
-
if ARCH_MULTI_V6
-comment "MX31 platforms:"
+comment "ARM1136 platforms"
-config MACH_MX31ADS
- bool "Support MX31ADS platforms"
- default y
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select SOC_IMX31
+config SOC_IMX31
+ bool "i.MX31 support"
+ select CPU_V6
+ select MXC_AVIC
help
- Include support for MX31ADS platform. This includes specific
- configurations for the board and its peripherals.
+ This enables support for Freescale i.MX31 processor
-config MACH_MX31ADS_WM1133_EV1
- bool "Support Wolfson Microelectronics 1133-EV1 module"
- depends on MACH_MX31ADS
- depends on MFD_WM8350_I2C
- depends on REGULATOR_WM8350 = y
+config SOC_IMX35
+ bool "i.MX35 support"
+ select MXC_AVIC
+ select PINCTRL_IMX35
help
- Include support for the Wolfson Microelectronics 1133-EV1 PMU
- and audio module for the MX31ADS platform.
-
-config MACH_MX31LILLY
- bool "Support MX31 LILLY-1131 platforms (INCO startec)"
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_SPI_IMX
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX31
- help
- Include support for mx31 based LILLY1131 modules. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_MX31LITE
- bool "Support MX31 LITEKIT (LogicPD)"
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_MXC_RTC
- select IMX_HAVE_PLATFORM_SPI_IMX
- select LEDS_GPIO_REGISTER
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX31
- help
- Include support for MX31 LITEKIT platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_PCM037
- bool "Support Phytec pcm037 (i.MX31) platforms"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_MXC_W1
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX31
- help
- Include support for Phytec pcm037 platform. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_PCM037_EET
- bool "Support pcm037 EET board extensions"
- depends on MACH_PCM037
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select IMX_HAVE_PLATFORM_SPI_IMX
- help
- Add support for PCM037 EET baseboard extensions. If you are using the
- OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
- command-line parameter.
-
-config MACH_MX31_3DS
- bool "Support MX31PDK (3DS)"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_KEYPAD
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_DEBUG_BOARD
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX31
- help
- Include support for MX31PDK (3DS) platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX31_3DS_MXC_NAND_USE_BBT
- bool "Make the MXC NAND driver use the in flash Bad Block Table"
- depends on MACH_MX31_3DS
- depends on MTD_NAND_MXC
- help
- Enable this if you want that the MXC NAND driver uses the in flash
- Bad Block Table to know what blocks are bad instead of scanning the
- entire flash looking for bad block markers.
-
-config MACH_MX31MOBOARD
- bool "Support mx31moboard platforms (EPFL Mobots group)"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_SPI_IMX
- select LEDS_GPIO_REGISTER
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX31
- help
- Include support for mx31moboard platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_QONG
- bool "Support Dave/DENX QongEVB-LITE platform"
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
- select SOC_IMX31
- help
- Include support for Dave/DENX QongEVB-LITE platform. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_ARMADILLO5X0
- bool "Support Atmark Armadillo-500 Development Base Board"
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX31
- help
- Include support for Atmark Armadillo-500 platform. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_KZM_ARM11_01
- bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
- select IMX_HAVE_PLATFORM_IMX_UART
- select SOC_IMX31
- help
- Include support for KZM-ARM11-01. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_BUG
- bool "Support Buglabs BUGBase platform"
- default y
- select IMX_HAVE_PLATFORM_IMX_UART
- select SOC_IMX31
- help
- Include support for BUGBase 1.3 platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_IMX31_DT
- bool "Support i.MX31 platforms from device tree"
- select SOC_IMX31
- help
- Include support for Freescale i.MX31 based platforms
- using the device tree for discovery.
-
-comment "MX35 platforms:"
-
-config MACH_IMX35_DT
- bool "Support i.MX35 platforms from device tree"
- select SOC_IMX35
- help
- Include support for Freescale i.MX35 based platforms
- using the device tree for discovery.
-
-config MACH_PCM043
- bool "Support Phytec pcm043 (i.MX35) platforms"
- select IMX_HAVE_PLATFORM_FLEXCAN
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX35
- help
- Include support for Phytec pcm043 platform. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_MX35_3DS
- bool "Support MX35PDK platform"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_MXC_RTC
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select MXC_DEBUG_BOARD
- select SOC_IMX35
- help
- Include support for MX35PDK platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_VPR200
- bool "Support VPR200 platform"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select SOC_IMX35
- help
- Include support for VPR200 platform. This includes specific
- configurations for the board and its peripherals.
+ This enables support for Freescale i.MX31 processor
endif
-comment "Device tree only"
-
if ARCH_MULTI_V4T
config SOC_IMX1
@@ -428,12 +83,20 @@
config SOC_IMX25
bool "i.MX25 support"
- select ARCH_MXC_IOMUX_V3
select CPU_ARM926T
select MXC_AVIC
select PINCTRL_IMX25
help
This enables support for Freescale i.MX25 processor
+
+config SOC_IMX27
+ bool "i.MX27 support"
+ select CPU_ARM926T
+ select MXC_AVIC
+ select PINCTRL_IMX27
+ help
+ This enables support for Freescale i.MX27 processor
+
endif
if ARCH_MULTI_V7
@@ -541,10 +204,10 @@
endif
-comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms"
-
if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
+comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms"
+
config SOC_IMX7D_CA7
bool
select ARM_GIC
@@ -607,6 +270,4 @@
endif
-source "arch/arm/mach-imx/devices/Kconfig"
-
endif
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index e7364e6..9cebd36 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -1,22 +1,16 @@
# SPDX-License-Identifier: GPL-2.0
obj-y := cpu.o system.o irq-common.o
-obj-$(CONFIG_SOC_IMX21) += mm-imx21.o
-
obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o
-obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
-obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o
+obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o mach-imx27.o
-obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o mach-imx31.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o mach-imx35.o
imx5-pm-$(CONFIG_PM) += pm-imx5.o
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y)
-obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
-obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
-
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o
@@ -37,37 +31,6 @@
obj-y += ssi-fiq-ksym.o
endif
-# i.MX21 based machines
-obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
-
-# i.MX27 based machines
-obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
-obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
-obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
-obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
-obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o
-
-# i.MX31 based machines
-obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
-obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
-obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
-obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
-obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
-obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
- mx31moboard-marxbot.o mx31moboard-smartbot.o
-obj-$(CONFIG_MACH_QONG) += mach-qong.o
-obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
-obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
-obj-$(CONFIG_MACH_BUG) += mach-bug.o
-obj-$(CONFIG_MACH_IMX31_DT) += imx31-dt.o
-
-# i.MX35 based machines
-obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
-obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
-obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
-obj-$(CONFIG_MACH_IMX35_DT) += imx35-dt.o
-
obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
@@ -105,5 +68,3 @@
obj-$(CONFIG_SOC_VF610) += mach-vf610.o
obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o
-
-obj-y += devices/
diff --git a/arch/arm/mach-imx/board-mx31lilly.h b/arch/arm/mach-imx/board-mx31lilly.h
deleted file mode 100644
index 3508c59..0000000
--- a/arch/arm/mach-imx/board-mx31lilly.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * Based on code for mobots boards,
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
-#define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
-
-#ifndef __ASSEMBLY__
-
-enum mx31lilly_boards {
- MX31LILLY_NOBOARD = 0,
- MX31LILLY_DB = 1,
-};
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls the baseboard's init function.
- */
-
-extern void mx31lilly_db_init(void);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ */
diff --git a/arch/arm/mach-imx/board-mx31lite.h b/arch/arm/mach-imx/board-mx31lite.h
deleted file mode 100644
index 7d7c621..0000000
--- a/arch/arm/mach-imx/board-mx31lite.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * Based on code for mobots boards,
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
-#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
-
-#ifndef __ASSEMBLY__
-
-enum mx31lite_boards {
- MX31LITE_NOBOARD = 0,
- MX31LITE_DB = 1,
-};
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls the baseboard's init function.
- */
-
-extern void mx31lite_db_init(void);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
diff --git a/arch/arm/mach-imx/board-mx31moboard.h b/arch/arm/mach-imx/board-mx31moboard.h
deleted file mode 100644
index 6f3ff4d..0000000
--- a/arch/arm/mach-imx/board-mx31moboard.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
-#define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
-
-#ifndef __ASSEMBLY__
-
-enum mx31moboard_boards {
- MX31NOBOARD = 0,
- MX31DEVBOARD = 1,
- MX31MARXBOT = 2,
- MX31SMARTBOT = 3,
- MX31EYEBOT = 4,
-};
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls the baseboard's init function.
- */
-
-extern void mx31moboard_devboard_init(void);
-extern void mx31moboard_marxbot_init(void);
-extern void mx31moboard_smartbot_init(int board);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ */
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 72c3fcc..2d76e2c 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -17,29 +17,14 @@ struct device_node;
enum mxc_cpu_pwr_mode;
struct of_device_id;
-void mx21_map_io(void);
-void mx27_map_io(void);
void mx31_map_io(void);
void mx35_map_io(void);
void imx21_init_early(void);
-void imx27_init_early(void);
void imx31_init_early(void);
void imx35_init_early(void);
void mxc_init_irq(void __iomem *);
-void mx21_init_irq(void);
-void mx27_init_irq(void);
void mx31_init_irq(void);
void mx35_init_irq(void);
-void imx21_soc_init(void);
-void imx27_soc_init(void);
-void imx31_soc_init(void);
-void imx35_soc_init(void);
-int mx21_clocks_init(unsigned long lref, unsigned long fref);
-int mx27_clocks_init(unsigned long fref);
-int mx31_clocks_init(unsigned long fref);
-int mx35_clocks_init(void);
-struct platform_device *mxc_register_gpio(char *name, int id,
- resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
void mxc_set_cpu_type(unsigned int type);
void mxc_restart(enum reboot_mode, const char *);
void mxc_arch_reset_init(void __iomem *);
diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c
index a969aa7..bf70e13 100644
--- a/arch/arm/mach-imx/cpu-imx27.c
+++ b/arch/arm/mach-imx/cpu-imx27.c
@@ -9,6 +9,7 @@
*/
#include <linux/io.h>
+#include <linux/of_address.h>
#include <linux/module.h>
#include "hardware.h"
@@ -17,16 +18,23 @@ static int mx27_cpu_rev = -1;
static int mx27_cpu_partnumber;
#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */
+#define SYSCTRL_OFFSET 0x800 /* Offset from CCM base address */
static int mx27_read_cpu_rev(void)
{
+ void __iomem *ccm_base;
+ struct device_node *np;
u32 val;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
+ ccm_base = of_iomap(np, 0);
+ BUG_ON(!ccm_base);
/*
* now we have access to the IO registers. As we need
* the silicon revision very early we read it here to
* avoid any further hooks
*/
- val = imx_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + SYS_CHIP_ID));
+ val = imx_readl(ccm_base + SYSCTRL_OFFSET + SYS_CHIP_ID);
mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF);
diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c
index 3ee684b..b9c24b8 100644
--- a/arch/arm/mach-imx/cpu-imx31.c
+++ b/arch/arm/mach-imx/cpu-imx31.c
@@ -6,6 +6,7 @@
*/
#include <linux/module.h>
+#include <linux/of_address.h>
#include <linux/io.h>
#include "common.h"
@@ -32,10 +33,16 @@ static struct {
static int mx31_read_cpu_rev(void)
{
+ void __iomem *iim_base;
+ struct device_node *np;
u32 i, srev;
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx31-iim");
+ iim_base = of_iomap(np, 0);
+ BUG_ON(!iim_base);
+
/* read SREV register from IIM module */
- srev = imx_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
+ srev = imx_readl(iim_base + MXC_IIMSREV);
srev &= 0xff;
for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c
index ebb3cda..80e7d8a 100644
--- a/arch/arm/mach-imx/cpu-imx35.c
+++ b/arch/arm/mach-imx/cpu-imx35.c
@@ -5,6 +5,7 @@
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
*/
#include <linux/module.h>
+#include <linux/of_address.h>
#include <linux/io.h>
#include "hardware.h"
@@ -14,9 +15,15 @@ static int mx35_cpu_rev = -1;
static int mx35_read_cpu_rev(void)
{
+ void __iomem *iim_base;
+ struct device_node *np;
u32 rev;
- rev = imx_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx35-iim");
+ iim_base = of_iomap(np, 0);
+ BUG_ON(!iim_base);
+
+ rev = imx_readl(iim_base + MXC_IIMSREV);
switch (rev) {
case 0x00:
return IMX_CHIP_REVISION_1_0;
diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h
deleted file mode 100644
index 3679d1d..0000000
--- a/arch/arm/mach-imx/devices-imx21.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "devices/devices-common.h"
-
-extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data;
-#define imx21_add_imx21_hcd(pdata) \
- imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata)
-
-extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data;
-#define imx21_add_imx2_wdt() \
- imx_add_imx2_wdt(&imx21_imx2_wdt_data)
-
-extern const struct imx_imx_fb_data imx21_imx_fb_data;
-#define imx21_add_imx_fb(pdata) \
- imx_add_imx_fb(&imx21_imx_fb_data, pdata)
-
-extern const struct imx_imx_i2c_data imx21_imx_i2c_data;
-#define imx21_add_imx_i2c(pdata) \
- imx_add_imx_i2c(&imx21_imx_i2c_data, pdata)
-
-extern const struct imx_imx_keypad_data imx21_imx_keypad_data;
-#define imx21_add_imx_keypad(pdata) \
- imx_add_imx_keypad(&imx21_imx_keypad_data, pdata)
-
-extern const struct imx_imx_ssi_data imx21_imx_ssi_data[];
-#define imx21_add_imx_ssi(id, pdata) \
- imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[];
-#define imx21_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx21_imx_uart_data[id], pdata)
-#define imx21_add_imx_uart0(pdata) imx21_add_imx_uart(0, pdata)
-#define imx21_add_imx_uart1(pdata) imx21_add_imx_uart(1, pdata)
-#define imx21_add_imx_uart2(pdata) imx21_add_imx_uart(2, pdata)
-#define imx21_add_imx_uart3(pdata) imx21_add_imx_uart(3, pdata)
-
-extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[];
-#define imx21_add_mxc_mmc(id, pdata) \
- imx_add_mxc_mmc(&imx21_mxc_mmc_data[id], pdata)
-
-extern const struct imx_mxc_nand_data imx21_mxc_nand_data;
-#define imx21_add_mxc_nand(pdata) \
- imx_add_mxc_nand(&imx21_mxc_nand_data, pdata)
-
-extern const struct imx_mxc_w1_data imx21_mxc_w1_data;
-#define imx21_add_mxc_w1() \
- imx_add_mxc_w1(&imx21_mxc_w1_data)
-
-extern const struct imx_spi_imx_data imx21_cspi_data[];
-#define imx21_add_cspi(id, pdata) \
- imx_add_spi_imx(&imx21_cspi_data[id], pdata)
-#define imx21_add_spi_imx0(pdata) imx21_add_cspi(0, pdata)
-#define imx21_add_spi_imx1(pdata) imx21_add_cspi(1, pdata)
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
deleted file mode 100644
index 583a1d7..0000000
--- a/arch/arm/mach-imx/devices-imx27.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "devices/devices-common.h"
-
-extern const struct imx_fec_data imx27_fec_data;
-#define imx27_add_fec(pdata) \
- imx_add_fec(&imx27_fec_data, pdata)
-
-extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data;
-#define imx27_add_fsl_usb2_udc(pdata) \
- imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata)
-
-extern const struct imx_imx27_coda_data imx27_coda_data;
-#define imx27_add_coda() \
- imx_add_imx27_coda(&imx27_coda_data)
-
-extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data;
-#define imx27_add_imx2_wdt() \
- imx_add_imx2_wdt(&imx27_imx2_wdt_data)
-
-extern const struct imx_imx_fb_data imx27_imx_fb_data;
-#define imx27_add_imx_fb(pdata) \
- imx_add_imx_fb(&imx27_imx_fb_data, pdata)
-
-extern const struct imx_imx_i2c_data imx27_imx_i2c_data[];
-#define imx27_add_imx_i2c(id, pdata) \
- imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata)
-
-extern const struct imx_imx_keypad_data imx27_imx_keypad_data;
-#define imx27_add_imx_keypad(pdata) \
- imx_add_imx_keypad(&imx27_imx_keypad_data, pdata)
-
-extern const struct imx_imx_ssi_data imx27_imx_ssi_data[];
-#define imx27_add_imx_ssi(id, pdata) \
- imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[];
-#define imx27_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx27_imx_uart_data[id], pdata)
-#define imx27_add_imx_uart0(pdata) imx27_add_imx_uart(0, pdata)
-#define imx27_add_imx_uart1(pdata) imx27_add_imx_uart(1, pdata)
-#define imx27_add_imx_uart2(pdata) imx27_add_imx_uart(2, pdata)
-#define imx27_add_imx_uart3(pdata) imx27_add_imx_uart(3, pdata)
-#define imx27_add_imx_uart4(pdata) imx27_add_imx_uart(4, pdata)
-#define imx27_add_imx_uart5(pdata) imx27_add_imx_uart(5, pdata)
-
-extern const struct imx_mx2_camera_data imx27_mx2_camera_data;
-#define imx27_add_mx2_camera(pdata) \
- imx_add_mx2_camera(&imx27_mx2_camera_data, pdata)
-
-extern const struct imx_mx2_emma_data imx27_mx2_emmaprp_data;
-#define imx27_add_mx2_emmaprp() \
- imx_add_mx2_emmaprp(&imx27_mx2_emmaprp_data)
-
-extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data;
-#define imx27_add_mxc_ehci_otg(pdata) \
- imx_add_mxc_ehci(&imx27_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[];
-#define imx27_add_mxc_ehci_hs(id, pdata) \
- imx_add_mxc_ehci(&imx27_mxc_ehci_hs_data[id - 1], pdata)
-
-extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[];
-#define imx27_add_mxc_mmc(id, pdata) \
- imx_add_mxc_mmc(&imx27_mxc_mmc_data[id], pdata)
-
-extern const struct imx_mxc_nand_data imx27_mxc_nand_data;
-#define imx27_add_mxc_nand(pdata) \
- imx_add_mxc_nand(&imx27_mxc_nand_data, pdata)
-
-extern const struct imx_mxc_w1_data imx27_mxc_w1_data;
-#define imx27_add_mxc_w1() \
- imx_add_mxc_w1(&imx27_mxc_w1_data)
-
-extern const struct imx_spi_imx_data imx27_cspi_data[];
-#define imx27_add_cspi(id, gtable) \
- imx_add_spi_imx(&imx27_cspi_data[id], gtable)
-#define imx27_add_spi_imx0(gtable) imx27_add_cspi(0, gtable)
-#define imx27_add_spi_imx1(gtable) imx27_add_cspi(1, gtable)
-#define imx27_add_spi_imx2(gtable) imx27_add_cspi(2, gtable)
-
-extern const struct imx_pata_imx_data imx27_pata_imx_data;
-#define imx27_add_pata_imx() \
- imx_add_pata_imx(&imx27_pata_imx_data)
diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h
deleted file mode 100644
index f7cc623..0000000
--- a/arch/arm/mach-imx/devices-imx31.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "devices/devices-common.h"
-
-extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data;
-#define imx31_add_fsl_usb2_udc(pdata) \
- imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata)
-
-extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data;
-#define imx31_add_imx2_wdt() \
- imx_add_imx2_wdt(&imx31_imx2_wdt_data)
-
-extern const struct imx_imx_i2c_data imx31_imx_i2c_data[];
-#define imx31_add_imx_i2c(id, pdata) \
- imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata)
-#define imx31_add_imx_i2c0(pdata) imx31_add_imx_i2c(0, pdata)
-#define imx31_add_imx_i2c1(pdata) imx31_add_imx_i2c(1, pdata)
-#define imx31_add_imx_i2c2(pdata) imx31_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_keypad_data imx31_imx_keypad_data;
-#define imx31_add_imx_keypad(pdata) \
- imx_add_imx_keypad(&imx31_imx_keypad_data, pdata)
-
-extern const struct imx_imx_ssi_data imx31_imx_ssi_data[];
-#define imx31_add_imx_ssi(id, pdata) \
- imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[];
-#define imx31_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata)
-#define imx31_add_imx_uart0(pdata) imx31_add_imx_uart(0, pdata)
-#define imx31_add_imx_uart1(pdata) imx31_add_imx_uart(1, pdata)
-#define imx31_add_imx_uart2(pdata) imx31_add_imx_uart(2, pdata)
-#define imx31_add_imx_uart3(pdata) imx31_add_imx_uart(3, pdata)
-#define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata)
-
-extern const struct imx_ipu_core_data imx31_ipu_core_data;
-#define imx31_add_ipu_core() \
- imx_add_ipu_core(&imx31_ipu_core_data)
-#define imx31_alloc_mx3_camera(pdata) \
- imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata)
-#define imx31_add_mx3_sdc_fb(pdata) \
- imx_add_mx3_sdc_fb(&imx31_ipu_core_data, pdata)
-
-extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data;
-#define imx31_add_mxc_ehci_otg(pdata) \
- imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[];
-#define imx31_add_mxc_ehci_hs(id, pdata) \
- imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata)
-
-extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[];
-#define imx31_add_mxc_mmc(id, pdata) \
- imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata)
-
-extern const struct imx_mxc_nand_data imx31_mxc_nand_data;
-#define imx31_add_mxc_nand(pdata) \
- imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
-
-extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data;
-#define imx31_add_mxc_rtc() \
- imx_add_mxc_rtc(&imx31_mxc_rtc_data)
-
-extern const struct imx_mxc_w1_data imx31_mxc_w1_data;
-#define imx31_add_mxc_w1() \
- imx_add_mxc_w1(&imx31_mxc_w1_data)
-
-extern const struct imx_spi_imx_data imx31_cspi_data[];
-#define imx31_add_cspi(id, gtable) \
- imx_add_spi_imx(&imx31_cspi_data[id], gtable)
-#define imx31_add_spi_imx0(gtable) imx31_add_cspi(0, gtable)
-#define imx31_add_spi_imx1(gtable) imx31_add_cspi(1, gtable)
-#define imx31_add_spi_imx2(gtable) imx31_add_cspi(2, gtable)
-
-extern const struct imx_pata_imx_data imx31_pata_imx_data;
-#define imx31_add_pata_imx() \
- imx_add_pata_imx(&imx31_pata_imx_data)
diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h
deleted file mode 100644
index 1b1bdad..0000000
--- a/arch/arm/mach-imx/devices-imx35.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "devices/devices-common.h"
-
-extern const struct imx_fec_data imx35_fec_data;
-#define imx35_add_fec(pdata) \
- imx_add_fec(&imx35_fec_data, pdata)
-
-extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data;
-#define imx35_add_fsl_usb2_udc(pdata) \
- imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata)
-
-extern const struct imx_flexcan_data imx35_flexcan_data[];
-#define imx35_add_flexcan(id) \
- imx_add_flexcan(&imx35_flexcan_data[id])
-#define imx35_add_flexcan0() imx35_add_flexcan(0)
-#define imx35_add_flexcan1() imx35_add_flexcan(1)
-
-extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data;
-#define imx35_add_imx2_wdt() \
- imx_add_imx2_wdt(&imx35_imx2_wdt_data)
-
-extern const struct imx_imx_i2c_data imx35_imx_i2c_data[];
-#define imx35_add_imx_i2c(id, pdata) \
- imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata)
-#define imx35_add_imx_i2c0(pdata) imx35_add_imx_i2c(0, pdata)
-#define imx35_add_imx_i2c1(pdata) imx35_add_imx_i2c(1, pdata)
-#define imx35_add_imx_i2c2(pdata) imx35_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_keypad_data imx35_imx_keypad_data;
-#define imx35_add_imx_keypad(pdata) \
- imx_add_imx_keypad(&imx35_imx_keypad_data, pdata)
-
-extern const struct imx_imx_ssi_data imx35_imx_ssi_data[];
-#define imx35_add_imx_ssi(id, pdata) \
- imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[];
-#define imx35_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata)
-#define imx35_add_imx_uart0(pdata) imx35_add_imx_uart(0, pdata)
-#define imx35_add_imx_uart1(pdata) imx35_add_imx_uart(1, pdata)
-#define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata)
-
-extern const struct imx_ipu_core_data imx35_ipu_core_data;
-#define imx35_add_ipu_core() \
- imx_add_ipu_core(&imx35_ipu_core_data)
-#define imx35_alloc_mx3_camera(pdata) \
- imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata)
-#define imx35_add_mx3_sdc_fb(pdata) \
- imx_add_mx3_sdc_fb(&imx35_ipu_core_data, pdata)
-
-extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data;
-#define imx35_add_mxc_ehci_otg(pdata) \
- imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data;
-#define imx35_add_mxc_ehci_hs(pdata) \
- imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata)
-
-extern const struct imx_mxc_nand_data imx35_mxc_nand_data;
-#define imx35_add_mxc_nand(pdata) \
- imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
-
-extern const struct imx_mxc_rtc_data imx35_mxc_rtc_data;
-#define imx35_add_mxc_rtc() \
- imx_add_mxc_rtc(&imx35_mxc_rtc_data)
-
-extern const struct imx_mxc_w1_data imx35_mxc_w1_data;
-#define imx35_add_mxc_w1() \
- imx_add_mxc_w1(&imx35_mxc_w1_data)
-
-extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[];
-#define imx35_add_sdhci_esdhc_imx(id, pdata) \
- imx_add_sdhci_esdhc_imx(&imx35_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx35_cspi_data[];
-#define imx35_add_cspi(id, pdata) \
- imx_add_spi_imx(&imx35_cspi_data[id], pdata)
-#define imx35_add_spi_imx0(pdata) imx35_add_cspi(0, pdata)
-#define imx35_add_spi_imx1(pdata) imx35_add_cspi(1, pdata)
-
-extern const struct imx_pata_imx_data imx35_pata_imx_data;
-#define imx35_add_pata_imx() \
- imx_add_pata_imx(&imx35_pata_imx_data)
diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig
deleted file mode 100644
index fdca73d..0000000
--- a/arch/arm/mach-imx/devices/Kconfig
+++ /dev/null
@@ -1,71 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config IMX_HAVE_PLATFORM_FEC
- bool
- default y if SOC_IMX25 || SOC_IMX27 || SOC_IMX35
-
-config IMX_HAVE_PLATFORM_FLEXCAN
- bool
-
-config IMX_HAVE_PLATFORM_FSL_USB2_UDC
- bool
-
-config IMX_HAVE_PLATFORM_GPIO_KEYS
- bool
-
-config IMX_HAVE_PLATFORM_IMX21_HCD
- bool
-
-config IMX_HAVE_PLATFORM_IMX27_CODA
- bool
- default y if SOC_IMX27
-
-config IMX_HAVE_PLATFORM_IMX2_WDT
- bool
-
-config IMX_HAVE_PLATFORM_IMX_FB
- bool
-
-config IMX_HAVE_PLATFORM_IMX_I2C
- bool
-
-config IMX_HAVE_PLATFORM_IMX_KEYPAD
- bool
-
-config IMX_HAVE_PLATFORM_PATA_IMX
- bool
-
-config IMX_HAVE_PLATFORM_IMX_SSI
- bool
-
-config IMX_HAVE_PLATFORM_IMX_UART
- bool
-
-config IMX_HAVE_PLATFORM_IPU_CORE
- bool
-
-config IMX_HAVE_PLATFORM_MX2_CAMERA
- bool
-
-config IMX_HAVE_PLATFORM_MX2_EMMA
- bool
-
-config IMX_HAVE_PLATFORM_MXC_EHCI
- bool
-
-config IMX_HAVE_PLATFORM_MXC_MMC
- bool
-
-config IMX_HAVE_PLATFORM_MXC_NAND
- bool
-
-config IMX_HAVE_PLATFORM_MXC_RTC
- bool
-
-config IMX_HAVE_PLATFORM_MXC_W1
- bool
-
-config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- bool
-
-config IMX_HAVE_PLATFORM_SPI_IMX
- bool
diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile
deleted file mode 100644
index e44758a..0000000
--- a/arch/arm/mach-imx/devices/Makefile
+++ /dev/null
@@ -1,28 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := devices.o
-
-obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o
-obj-y += platform-gpio-mxc.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX27_CODA) += platform-imx27-coda.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
-obj-y += platform-imx-dma.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD) += platform-imx-keypad.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_PATA_IMX) += platform-pata_imx.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
deleted file mode 100644
index 327a1de..0000000
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ /dev/null
@@ -1,293 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_data/dma-imx-sdma.h>
-
-extern struct device mxc_aips_bus;
-extern struct device mxc_ahb_bus;
-
-static inline struct platform_device *imx_add_platform_device_dmamask(
- const char *name, int id,
- const struct resource *res, unsigned int num_resources,
- const void *data, size_t size_data, u64 dmamask)
-{
- struct platform_device_info pdevinfo = {
- .name = name,
- .id = id,
- .res = res,
- .num_res = num_resources,
- .data = data,
- .size_data = size_data,
- .dma_mask = dmamask,
- };
- return platform_device_register_full(&pdevinfo);
-}
-
-static inline struct platform_device *imx_add_platform_device(
- const char *name, int id,
- const struct resource *res, unsigned int num_resources,
- const void *data, size_t size_data)
-{
- return imx_add_platform_device_dmamask(
- name, id, res, num_resources, data, size_data, 0);
-}
-
-#include <linux/fec.h>
-struct imx_fec_data {
- const char *devid;
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_fec(
- const struct imx_fec_data *data,
- const struct fec_platform_data *pdata);
-
-struct imx_flexcan_data {
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_flexcan(
- const struct imx_flexcan_data *data);
-
-#include <linux/fsl_devices.h>
-struct imx_fsl_usb2_udc_data {
- const char *devid;
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_fsl_usb2_udc(
- const struct imx_fsl_usb2_udc_data *data,
- const struct fsl_usb2_platform_data *pdata);
-
-#include <linux/gpio_keys.h>
-struct platform_device *__init imx_add_gpio_keys(
- const struct gpio_keys_platform_data *pdata);
-
-#include <linux/platform_data/usb-mx2.h>
-struct imx_imx21_hcd_data {
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx21_hcd(
- const struct imx_imx21_hcd_data *data,
- const struct mx21_usbh_platform_data *pdata);
-
-struct imx_imx27_coda_data {
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx27_coda(
- const struct imx_imx27_coda_data *data);
-
-struct imx_imx2_wdt_data {
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
-};
-struct platform_device *__init imx_add_imx2_wdt(
- const struct imx_imx2_wdt_data *data);
-
-struct imx_imxdi_rtc_data {
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imxdi_rtc(
- const struct imx_imxdi_rtc_data *data);
-
-#include <linux/platform_data/video-imxfb.h>
-struct imx_imx_fb_data {
- const char *devid;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx_fb(
- const struct imx_imx_fb_data *data,
- const struct imx_fb_platform_data *pdata);
-
-#include <linux/platform_data/i2c-imx.h>
-struct imx_imx_i2c_data {
- const char *devid;
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx_i2c(
- const struct imx_imx_i2c_data *data,
- const struct imxi2c_platform_data *pdata);
-
-#include <linux/input/matrix_keypad.h>
-struct imx_imx_keypad_data {
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx_keypad(
- const struct imx_imx_keypad_data *data,
- const struct matrix_keymap_data *pdata);
-
-#include <linux/platform_data/asoc-imx-ssi.h>
-struct imx_imx_ssi_data {
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
- resource_size_t dmatx0;
- resource_size_t dmarx0;
- resource_size_t dmatx1;
- resource_size_t dmarx1;
-};
-struct platform_device *__init imx_add_imx_ssi(
- const struct imx_imx_ssi_data *data,
- const struct imx_ssi_platform_data *pdata);
-
-#include <linux/platform_data/serial-imx.h>
-struct imx_imx_uart_1irq_data {
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx_uart_1irq(
- const struct imx_imx_uart_1irq_data *data,
- const struct imxuart_platform_data *pdata);
-
-#include <linux/platform_data/video-mx3fb.h>
-#include <linux/platform_data/media/camera-mx3.h>
-struct imx_ipu_core_data {
- resource_size_t iobase;
- resource_size_t synirq;
- resource_size_t errirq;
-};
-struct platform_device *__init imx_add_ipu_core(
- const struct imx_ipu_core_data *data);
-struct platform_device *__init imx_alloc_mx3_camera(
- const struct imx_ipu_core_data *data,
- const struct mx3_camera_pdata *pdata);
-struct platform_device *__init imx_add_mx3_sdc_fb(
- const struct imx_ipu_core_data *data,
- struct mx3fb_platform_data *pdata);
-
-#include <linux/platform_data/media/camera-mx2.h>
-struct imx_mx2_camera_data {
- const char *devid;
- resource_size_t iobasecsi;
- resource_size_t iosizecsi;
- resource_size_t irqcsi;
- resource_size_t iobaseemmaprp;
- resource_size_t iosizeemmaprp;
- resource_size_t irqemmaprp;
-};
-struct platform_device *__init imx_add_mx2_camera(
- const struct imx_mx2_camera_data *data,
- const struct mx2_camera_platform_data *pdata);
-
-
-struct imx_mx2_emma_data {
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_mx2_emmaprp(
- const struct imx_mx2_emma_data *data);
-
-#include <linux/platform_data/usb-ehci-mxc.h>
-struct imx_mxc_ehci_data {
- int id;
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_mxc_ehci(
- const struct imx_mxc_ehci_data *data,
- const struct mxc_usbh_platform_data *pdata);
-
-#include <linux/platform_data/mmc-mxcmmc.h>
-struct imx_mxc_mmc_data {
- const char *devid;
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
- resource_size_t dmareq;
-};
-struct platform_device *__init imx_add_mxc_mmc(
- const struct imx_mxc_mmc_data *data,
- const struct imxmmc_platform_data *pdata);
-
-#include <linux/platform_data/mtd-mxc_nand.h>
-struct imx_mxc_nand_data {
- const char *devid;
- /*
- * id is traditionally 0, but -1 is more appropriate. We use -1 for new
- * machines but don't change existing devices as the nand device usually
- * appears in the kernel command line to pass its partitioning.
- */
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t axibase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_mxc_nand(
- const struct imx_mxc_nand_data *data,
- const struct mxc_nand_platform_data *pdata);
-
-struct imx_pata_imx_data {
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_pata_imx(
- const struct imx_pata_imx_data *data);
-
-/* mxc_rtc */
-struct imx_mxc_rtc_data {
- const char *devid;
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_mxc_rtc(
- const struct imx_mxc_rtc_data *data);
-
-/* mxc_w1 */
-struct imx_mxc_w1_data {
- resource_size_t iobase;
-};
-struct platform_device *__init imx_add_mxc_w1(
- const struct imx_mxc_w1_data *data);
-
-#include <linux/platform_data/mmc-esdhc-imx.h>
-struct imx_sdhci_esdhc_imx_data {
- const char *devid;
- int id;
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_sdhci_esdhc_imx(
- const struct imx_sdhci_esdhc_imx_data *data,
- const struct esdhc_platform_data *pdata);
-
-struct imx_spi_imx_data {
- const char *devid;
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- int irq;
-};
-struct platform_device *__init imx_add_spi_imx(
- const struct imx_spi_imx_data *data, struct gpiod_lookup_table *gtable);
-
-struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase,
- int irq);
-struct platform_device *imx_add_imx_sdma(char *name,
- resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
diff --git a/arch/arm/mach-imx/devices/devices.c b/arch/arm/mach-imx/devices/devices.c
deleted file mode 100644
index cd72f08..0000000
--- a/arch/arm/mach-imx/devices/devices.c
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-
-#include "../common.h"
-#include "devices-common.h"
-
-struct device mxc_aips_bus = {
- .init_name = "mxc_aips",
-};
-
-struct device mxc_ahb_bus = {
- .init_name = "mxc_ahb",
-};
-
-int __init mxc_device_init(void)
-{
- int ret;
-
- ret = device_register(&mxc_aips_bus);
- if (ret < 0)
- goto done;
-
- ret = device_register(&mxc_ahb_bus);
-
-done:
- return ret;
-}
diff --git a/arch/arm/mach-imx/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c
deleted file mode 100644
index 88e853d..0000000
--- a/arch/arm/mach-imx/devices/platform-fec.c
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/dma-mapping.h>
-#include <linux/sizes.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_fec_data_entry_single(soc, _devid) \
- { \
- .devid = _devid, \
- .iobase = soc ## _FEC_BASE_ADDR, \
- .irq = soc ## _INT_FEC, \
- }
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_fec_data imx27_fec_data __initconst =
- imx_fec_data_entry_single(MX27, "imx27-fec");
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX35
-/* i.mx35 has the i.mx27 type fec */
-const struct imx_fec_data imx35_fec_data __initconst =
- imx_fec_data_entry_single(MX35, "imx27-fec");
-#endif
-
-struct platform_device *__init imx_add_fec(
- const struct imx_fec_data *data,
- const struct fec_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device_dmamask(data->devid, 0,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-flexcan.c b/arch/arm/mach-imx/devices/platform-flexcan.c
deleted file mode 100644
index e4eed35..0000000
--- a/arch/arm/mach-imx/devices/platform-flexcan.c
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_flexcan_data_entry_single(soc, _id, _hwid, _size) \
- { \
- .id = _id, \
- .iobase = soc ## _CAN ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_CAN ## _hwid, \
- }
-
-#define imx_flexcan_data_entry(soc, _id, _hwid, _size) \
- [_id] = imx_flexcan_data_entry_single(soc, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_flexcan_data imx35_flexcan_data[] __initconst = {
-#define imx35_flexcan_data_entry(_id, _hwid) \
- imx_flexcan_data_entry(MX35, _id, _hwid, SZ_16K)
- imx35_flexcan_data_entry(0, 1),
- imx35_flexcan_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_flexcan(
- const struct imx_flexcan_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device("flexcan", data->id,
- res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
deleted file mode 100644
index cc86de4..0000000
--- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
+++ /dev/null
@@ -1,51 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/dma-mapping.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_fsl_usb2_udc_data_entry_single(soc, _devid) \
- { \
- .devid = _devid, \
- .iobase = soc ## _USB_OTG_BASE_ADDR, \
- .irq = soc ## _INT_USB_OTG, \
- }
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27");
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_fsl_usb2_udc(
- const struct imx_fsl_usb2_udc_data *data,
- const struct fsl_usb2_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask(data->devid, -1,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-gpio-mxc.c b/arch/arm/mach-imx/devices/platform-gpio-mxc.c
deleted file mode 100644
index 355de84..0000000
--- a/arch/arm/mach-imx/devices/platform-gpio-mxc.c
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Linaro Limited
- */
-#include "devices-common.h"
-#include "../common.h"
-
-struct platform_device *__init mxc_register_gpio(char *name, int id,
- resource_size_t iobase, resource_size_t iosize, int irq, int irq_high)
-{
- struct resource res[] = {
- {
- .start = iobase,
- .end = iobase + iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = irq,
- .end = irq,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = irq_high,
- .end = irq_high,
- .flags = IORESOURCE_IRQ,
- },
- };
- unsigned int nres;
-
- nres = irq_high ? ARRAY_SIZE(res) : ARRAY_SIZE(res) - 1;
- return platform_device_register_resndata(&mxc_aips_bus, name, id, res, nres, NULL, 0);
-}
diff --git a/arch/arm/mach-imx/devices/platform-gpio_keys.c b/arch/arm/mach-imx/devices/platform-gpio_keys.c
deleted file mode 100644
index 4886784..0000000
--- a/arch/arm/mach-imx/devices/platform-gpio_keys.c
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-#include <linux/sizes.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-struct platform_device *__init imx_add_gpio_keys(
- const struct gpio_keys_platform_data *pdata)
-{
- return imx_add_platform_device("gpio-keys", -1, NULL,
- 0, pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx-dma.c b/arch/arm/mach-imx/devices/platform-imx-dma.c
deleted file mode 100644
index 12656f2..0000000
--- a/arch/arm/mach-imx/devices/platform-imx-dma.c
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "devices-common.h"
-
-struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name,
- resource_size_t iobase, int irq)
-{
- struct resource res[] = {
- {
- .start = iobase,
- .end = iobase + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = irq,
- .end = irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return platform_device_register_resndata(&mxc_ahb_bus,
- name, -1, res, ARRAY_SIZE(res), NULL, 0);
-}
-
-struct platform_device __init __maybe_unused *imx_add_imx_sdma(char *name,
- resource_size_t iobase, int irq, struct sdma_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = iobase,
- .end = iobase + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = irq,
- .end = irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return platform_device_register_resndata(&mxc_ahb_bus, name,
- -1, res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c
deleted file mode 100644
index e553d01..0000000
--- a/arch/arm/mach-imx/devices/platform-imx-fb.c
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/dma-mapping.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx_fb_data_entry_single(soc, _devid, _size) \
- { \
- .devid = _devid, \
- .iobase = soc ## _LCDC_BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_LCDC, \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
- imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx_fb_data imx27_imx_fb_data __initconst =
- imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-struct platform_device *__init imx_add_imx_fb(
- const struct imx_imx_fb_data *data,
- const struct imx_fb_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask(data->devid, 0,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c
deleted file mode 100644
index 81d317b..0000000
--- a/arch/arm/mach-imx/devices/platform-imx-i2c.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size) \
- { \
- .devid = _devid, \
- .id = _id, \
- .iobase = soc ## _I2C ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_I2C ## _hwid, \
- }
-
-#define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size) \
- [_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
- imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
-#define imx27_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX27, "imx21-i2c", _id, _hwid, SZ_4K)
- imx27_imx_i2c_data_entry(0, 1),
- imx27_imx_i2c_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = {
-#define imx31_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX31, "imx21-i2c", _id, _hwid, SZ_4K)
- imx31_imx_i2c_data_entry(0, 1),
- imx31_imx_i2c_data_entry(1, 2),
- imx31_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
-#define imx35_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX35, "imx21-i2c", _id, _hwid, SZ_4K)
- imx35_imx_i2c_data_entry(0, 1),
- imx35_imx_i2c_data_entry(1, 2),
- imx35_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_imx_i2c(
- const struct imx_imx_i2c_data *data,
- const struct imxi2c_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device(data->devid, data->id,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx-keypad.c b/arch/arm/mach-imx/devices/platform-imx-keypad.c
deleted file mode 100644
index de2e03e..0000000
--- a/arch/arm/mach-imx/devices/platform-imx-keypad.c
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx_keypad_data_entry_single(soc, _size) \
- { \
- .iobase = soc ## _KPP_BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_KPP, \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst =
- imx_imx_keypad_data_entry_single(MX21, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst =
- imx_imx_keypad_data_entry_single(MX27, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst =
- imx_imx_keypad_data_entry_single(MX31, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst =
- imx_imx_keypad_data_entry_single(MX35, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_imx_keypad(
- const struct imx_imx_keypad_data *data,
- const struct matrix_keymap_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device("imx-keypad", -1,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx-ssi.c b/arch/arm/mach-imx/devices/platform-imx-ssi.c
deleted file mode 100644
index ed8c664..0000000
--- a/arch/arm/mach-imx/devices/platform-imx-ssi.c
+++ /dev/null
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx_ssi_data_entry(soc, _id, _hwid, _size) \
- [_id] = { \
- .id = _id, \
- .iobase = soc ## _SSI ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_SSI ## _hwid, \
- .dmatx0 = soc ## _DMA_REQ_SSI ## _hwid ## _TX0, \
- .dmarx0 = soc ## _DMA_REQ_SSI ## _hwid ## _RX0, \
- .dmatx1 = soc ## _DMA_REQ_SSI ## _hwid ## _TX1, \
- .dmarx1 = soc ## _DMA_REQ_SSI ## _hwid ## _RX1, \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = {
-#define imx21_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX21, _id, _hwid, SZ_4K)
- imx21_imx_ssi_data_entry(0, 1),
- imx21_imx_ssi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = {
-#define imx27_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX27, _id, _hwid, SZ_4K)
- imx27_imx_ssi_data_entry(0, 1),
- imx27_imx_ssi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst = {
-#define imx31_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX31, _id, _hwid, SZ_4K)
- imx31_imx_ssi_data_entry(0, 1),
- imx31_imx_ssi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = {
-#define imx35_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX35, _id, _hwid, SZ_4K)
- imx35_imx_ssi_data_entry(0, 1),
- imx35_imx_ssi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_imx_ssi(
- const struct imx_imx_ssi_data *data,
- const struct imx_ssi_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
-#define DMARES(_name) { \
- .name = #_name, \
- .start = data->dma ## _name, \
- .end = data->dma ## _name, \
- .flags = IORESOURCE_DMA, \
-}
- DMARES(tx0),
- DMARES(rx0),
- DMARES(tx1),
- DMARES(rx1),
- };
-
- return imx_add_platform_device("imx-ssi", data->id,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c
deleted file mode 100644
index c8f01de..0000000
--- a/arch/arm/mach-imx/devices/platform-imx-uart.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size) \
- [_id] = { \
- .id = _id, \
- .iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irqrx = soc ## _INT_UART ## _hwid ## RX, \
- .irqtx = soc ## _INT_UART ## _hwid ## TX, \
- .irqrts = soc ## _INT_UART ## _hwid ## RTS, \
- }
-
-#define imx_imx_uart_1irq_data_entry(soc, _id, _hwid, _size) \
- [_id] = { \
- .id = _id, \
- .iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_UART ## _hwid, \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = {
-#define imx21_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX21, _id, _hwid, SZ_4K)
- imx21_imx_uart_data_entry(0, 1),
- imx21_imx_uart_data_entry(1, 2),
- imx21_imx_uart_data_entry(2, 3),
- imx21_imx_uart_data_entry(3, 4),
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = {
-#define imx27_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX27, _id, _hwid, SZ_4K)
- imx27_imx_uart_data_entry(0, 1),
- imx27_imx_uart_data_entry(1, 2),
- imx27_imx_uart_data_entry(2, 3),
- imx27_imx_uart_data_entry(3, 4),
- imx27_imx_uart_data_entry(4, 5),
- imx27_imx_uart_data_entry(5, 6),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = {
-#define imx31_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_4K)
- imx31_imx_uart_data_entry(0, 1),
- imx31_imx_uart_data_entry(1, 2),
- imx31_imx_uart_data_entry(2, 3),
- imx31_imx_uart_data_entry(3, 4),
- imx31_imx_uart_data_entry(4, 5),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
-#define imx35_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX35, _id, _hwid, SZ_16K)
- imx35_imx_uart_data_entry(0, 1),
- imx35_imx_uart_data_entry(1, 2),
- imx35_imx_uart_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_imx_uart_1irq(
- const struct imx_imx_uart_1irq_data *data,
- const struct imxuart_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- /* i.mx21 type uart runs on all i.mx except i.mx1 */
- return imx_add_platform_device("imx21-uart", data->id,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx2-wdt.c b/arch/arm/mach-imx/devices/platform-imx2-wdt.c
deleted file mode 100644
index fdd355a..0000000
--- a/arch/arm/mach-imx/devices/platform-imx2-wdt.c
+++ /dev/null
@@ -1,52 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/sizes.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size) \
- { \
- .id = _id, \
- .iobase = soc ## _WDOG ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- }
-#define imx_imx2_wdt_data_entry(soc, _id, _hwid, _size) \
- [_id] = imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst =
- imx_imx2_wdt_data_entry_single(MX21, 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst =
- imx_imx2_wdt_data_entry_single(MX27, 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst =
- imx_imx2_wdt_data_entry_single(MX31, 0, , SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst =
- imx_imx2_wdt_data_entry_single(MX35, 0, , SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_imx2_wdt(
- const struct imx_imx2_wdt_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- },
- };
- return imx_add_platform_device("imx2-wdt", data->id,
- res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx21-hcd.c b/arch/arm/mach-imx/devices/platform-imx21-hcd.c
deleted file mode 100644
index f55763c..0000000
--- a/arch/arm/mach-imx/devices/platform-imx21-hcd.c
+++ /dev/null
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx21_hcd_data_entry_single(soc) \
- { \
- .iobase = soc ## _USBOTG_BASE_ADDR, \
- .irq = soc ## _INT_USBHOST, \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst =
- imx_imx21_hcd_data_entry_single(MX21);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-struct platform_device *__init imx_add_imx21_hcd(
- const struct imx_imx21_hcd_data *data,
- const struct mx21_usbh_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask("imx21-hcd", 0,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx27-coda.c b/arch/arm/mach-imx/devices/platform-imx27-coda.c
deleted file mode 100644
index 66a116e..0000000
--- a/arch/arm/mach-imx/devices/platform-imx27-coda.c
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Vista Silicon
- * Javier Martin <javier.martin@vista-silicon.com>
- */
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx27_coda_data imx27_coda_data __initconst = {
- .iobase = MX27_VPU_BASE_ADDR,
- .iosize = SZ_512,
- .irq = MX27_INT_VPU,
-};
-#endif
-
-struct platform_device *__init imx_add_imx27_coda(
- const struct imx_imx27_coda_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask("coda-imx27", 0, res, 2, NULL,
- 0, DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-ipu-core.c b/arch/arm/mach-imx/devices/platform-ipu-core.c
deleted file mode 100644
index b429076..0000000
--- a/arch/arm/mach-imx/devices/platform-ipu-core.c
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/dma-mapping.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_ipu_core_entry_single(soc) \
-{ \
- .iobase = soc ## _IPU_CTRL_BASE_ADDR, \
- .synirq = soc ## _INT_IPU_SYN, \
- .errirq = soc ## _INT_IPU_ERR, \
-}
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_ipu_core_data imx31_ipu_core_data __initconst =
- imx_ipu_core_entry_single(MX31);
-#endif
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_ipu_core_data imx35_ipu_core_data __initconst =
- imx_ipu_core_entry_single(MX35);
-#endif
-
-static struct platform_device *imx_ipu_coredev __initdata;
-
-struct platform_device *__init imx_add_ipu_core(
- const struct imx_ipu_core_data *data)
-{
- /* The resource order is important! */
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + 0x5f,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->iobase + 0x88,
- .end = data->iobase + 0xb3,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->synirq,
- .end = data->synirq,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->errirq,
- .end = data->errirq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_ipu_coredev = imx_add_platform_device("ipu-core", -1,
- res, ARRAY_SIZE(res), NULL, 0);
-}
-
-struct platform_device *__init imx_alloc_mx3_camera(
- const struct imx_ipu_core_data *data,
- const struct mx3_camera_pdata *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase + 0x60,
- .end = data->iobase + 0x87,
- .flags = IORESOURCE_MEM,
- },
- };
- int ret = -ENOMEM;
- struct platform_device *pdev;
-
- if (IS_ERR_OR_NULL(imx_ipu_coredev))
- return ERR_PTR(-ENODEV);
-
- pdev = platform_device_alloc("mx3-camera", 0);
- if (!pdev)
- return ERR_PTR(-ENOMEM);
-
- pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
- if (!pdev->dev.dma_mask)
- goto err;
-
- *pdev->dev.dma_mask = DMA_BIT_MASK(32);
- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-
- ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
- if (ret)
- goto err;
-
- if (pdata) {
- struct mx3_camera_pdata *copied_pdata;
-
- ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
- if (ret) {
-err:
- kfree(pdev->dev.dma_mask);
- platform_device_put(pdev);
- return ERR_PTR(-ENODEV);
- }
- copied_pdata = dev_get_platdata(&pdev->dev);
- copied_pdata->dma_dev = &imx_ipu_coredev->dev;
- }
-
- return pdev;
-}
-
-struct platform_device *__init imx_add_mx3_sdc_fb(
- const struct imx_ipu_core_data *data,
- struct mx3fb_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase + 0xb4,
- .end = data->iobase + 0x1bf,
- .flags = IORESOURCE_MEM,
- },
- };
-
- if (IS_ERR_OR_NULL(imx_ipu_coredev))
- return ERR_PTR(-ENODEV);
-
- pdata->dma_dev = &imx_ipu_coredev->dev;
-
- return imx_add_platform_device_dmamask("mx3_sdc_fb", -1,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata),
- DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mx2-camera.c b/arch/arm/mach-imx/devices/platform-mx2-camera.c
deleted file mode 100644
index 5375f8b..0000000
--- a/arch/arm/mach-imx/devices/platform-mx2-camera.c
+++ /dev/null
@@ -1,59 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mx2_camera_data_entry_single(soc, _devid) \
- { \
- .devid = _devid, \
- .iobasecsi = soc ## _CSI_BASE_ADDR, \
- .iosizecsi = SZ_4K, \
- .irqcsi = soc ## _INT_CSI, \
- }
-#define imx_mx2_camera_data_entry_single_emma(soc, _devid) \
- { \
- .devid = _devid, \
- .iobasecsi = soc ## _CSI_BASE_ADDR, \
- .iosizecsi = SZ_32, \
- .irqcsi = soc ## _INT_CSI, \
- .iobaseemmaprp = soc ## _EMMAPRP_BASE_ADDR, \
- .iosizeemmaprp = SZ_32, \
- .irqemmaprp = soc ## _INT_EMMAPRP, \
- }
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst =
- imx_mx2_camera_data_entry_single_emma(MX27, "imx27-camera");
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-struct platform_device *__init imx_add_mx2_camera(
- const struct imx_mx2_camera_data *data,
- const struct mx2_camera_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobasecsi,
- .end = data->iobasecsi + data->iosizecsi - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irqcsi,
- .end = data->irqcsi,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->iobaseemmaprp,
- .end = data->iobaseemmaprp + data->iosizeemmaprp - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irqemmaprp,
- .end = data->irqemmaprp,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask(data->devid, 0,
- res, data->iobaseemmaprp ? 4 : 2,
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
-
diff --git a/arch/arm/mach-imx/devices/platform-mx2-emma.c b/arch/arm/mach-imx/devices/platform-mx2-emma.c
deleted file mode 100644
index 20f28ba..0000000
--- a/arch/arm/mach-imx/devices/platform-mx2-emma.c
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mx2_emmaprp_data_entry_single(soc) \
- { \
- .iobase = soc ## _EMMAPRP_BASE_ADDR, \
- .iosize = SZ_256, \
- .irq = soc ## _INT_EMMAPRP, \
- }
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mx2_emma_data imx27_mx2_emmaprp_data __initconst =
- imx_mx2_emmaprp_data_entry_single(MX27);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-struct platform_device *__init imx_add_mx2_emmaprp(
- const struct imx_mx2_emma_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask("m2m-emmaprp", 0,
- res, 2, NULL, 0, DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mxc-ehci.c b/arch/arm/mach-imx/devices/platform-mxc-ehci.c
deleted file mode 100644
index d9d7cc7..0000000
--- a/arch/arm/mach-imx/devices/platform-mxc-ehci.c
+++ /dev/null
@@ -1,61 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/dma-mapping.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mxc_ehci_data_entry_single(soc, _id, hs) \
- { \
- .id = _id, \
- .iobase = soc ## _USB_ ## hs ## _BASE_ADDR, \
- .irq = soc ## _INT_USB_ ## hs, \
- }
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst =
- imx_mxc_ehci_data_entry_single(MX27, 0, OTG);
-const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst = {
- imx_mxc_ehci_data_entry_single(MX27, 1, HS1),
- imx_mxc_ehci_data_entry_single(MX27, 2, HS2),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst =
- imx_mxc_ehci_data_entry_single(MX31, 0, OTG);
-const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst = {
- imx_mxc_ehci_data_entry_single(MX31, 1, HS1),
- imx_mxc_ehci_data_entry_single(MX31, 2, HS2),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst =
- imx_mxc_ehci_data_entry_single(MX35, 0, OTG);
-const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst =
- imx_mxc_ehci_data_entry_single(MX35, 1, HS);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_mxc_ehci(
- const struct imx_mxc_ehci_data *data,
- const struct mxc_usbh_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask("mxc-ehci", data->id,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mxc-mmc.c b/arch/arm/mach-imx/devices/platform-mxc-mmc.c
deleted file mode 100644
index cd4c502..0000000
--- a/arch/arm/mach-imx/devices/platform-mxc-mmc.c
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/dma-mapping.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size) \
- { \
- .devid = _devid, \
- .id = _id, \
- .iobase = soc ## _SDHC ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_SDHC ## _hwid, \
- .dmareq = soc ## _DMA_REQ_SDHC ## _hwid, \
- }
-#define imx_mxc_mmc_data_entry(soc, _devid, _id, _hwid, _size) \
- [_id] = imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst = {
-#define imx21_mxc_mmc_data_entry(_id, _hwid) \
- imx_mxc_mmc_data_entry(MX21, "imx21-mmc", _id, _hwid, SZ_4K)
- imx21_mxc_mmc_data_entry(0, 1),
- imx21_mxc_mmc_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst = {
-#define imx27_mxc_mmc_data_entry(_id, _hwid) \
- imx_mxc_mmc_data_entry(MX27, "imx21-mmc", _id, _hwid, SZ_4K)
- imx27_mxc_mmc_data_entry(0, 1),
- imx27_mxc_mmc_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst = {
-#define imx31_mxc_mmc_data_entry(_id, _hwid) \
- imx_mxc_mmc_data_entry(MX31, "imx31-mmc", _id, _hwid, SZ_16K)
- imx31_mxc_mmc_data_entry(0, 1),
- imx31_mxc_mmc_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-struct platform_device *__init imx_add_mxc_mmc(
- const struct imx_mxc_mmc_data *data,
- const struct imxmmc_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->dmareq,
- .end = data->dmareq,
- .flags = IORESOURCE_DMA,
- },
- };
- return imx_add_platform_device_dmamask(data->devid, data->id,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mxc_nand.c b/arch/arm/mach-imx/devices/platform-mxc_nand.c
deleted file mode 100644
index 0f5f741..0000000
--- a/arch/arm/mach-imx/devices/platform-mxc_nand.c
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/sizes.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mxc_nand_data_entry_single(soc, _devid, _size) \
- { \
- .devid = _devid, \
- .iobase = soc ## _NFC_BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_NFC \
- }
-
-#define imx_mxc_nandv3_data_entry_single(soc, _devid, _size) \
- { \
- .devid = _devid, \
- .id = -1, \
- .iobase = soc ## _NFC_BASE_ADDR, \
- .iosize = _size, \
- .axibase = soc ## _NFC_AXI_BASE_ADDR, \
- .irq = soc ## _INT_NFC \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX31, "imx27-nand", SZ_4K);
-#endif
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX35, "imx25-nand", SZ_8K);
-#endif
-
-struct platform_device *__init imx_add_mxc_nand(
- const struct imx_mxc_nand_data *data,
- const struct mxc_nand_platform_data *pdata)
-{
- /* AXI has to come first, that's how the mxc_nand driver expect it */
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->axibase,
- .end = data->axibase + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- };
- return imx_add_platform_device(data->devid, data->id,
- res, ARRAY_SIZE(res) - !data->axibase,
- pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mxc_rtc.c b/arch/arm/mach-imx/devices/platform-mxc_rtc.c
deleted file mode 100644
index 0c746de..0000000
--- a/arch/arm/mach-imx/devices/platform-mxc_rtc.c
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010-2011 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mxc_rtc_data_entry_single(soc, _devid) \
- { \
- .devid = _devid, \
- .iobase = soc ## _RTC_BASE_ADDR, \
- .irq = soc ## _INT_RTC, \
- }
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_mxc_rtc_data imx31_mxc_rtc_data __initconst =
- imx_mxc_rtc_data_entry_single(MX31, "imx21-rtc");
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_mxc_rtc_data imx35_mxc_rtc_data __initconst =
- imx_mxc_rtc_data_entry_single(MX35, "imx21-rtc");
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_mxc_rtc(
- const struct imx_mxc_rtc_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device(data->devid, -1,
- res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-imx/devices/platform-mxc_w1.c b/arch/arm/mach-imx/devices/platform-mxc_w1.c
deleted file mode 100644
index ab42c6b..0000000
--- a/arch/arm/mach-imx/devices/platform-mxc_w1.c
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mxc_w1_data_entry_single(soc) \
- { \
- .iobase = soc ## _OWIRE_BASE_ADDR, \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst =
- imx_mxc_w1_data_entry_single(MX21);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst =
- imx_mxc_w1_data_entry_single(MX27);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst =
- imx_mxc_w1_data_entry_single(MX31);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst =
- imx_mxc_w1_data_entry_single(MX35);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_mxc_w1(
- const struct imx_mxc_w1_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- };
-
- return imx_add_platform_device("mxc_w1", 0,
- res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-imx/devices/platform-pata_imx.c b/arch/arm/mach-imx/devices/platform-pata_imx.c
deleted file mode 100644
index 0e985ff..0000000
--- a/arch/arm/mach-imx/devices/platform-pata_imx.c
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_pata_imx_data_entry_single(soc, _size) \
- { \
- .iobase = soc ## _ATA_BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_ATA, \
- }
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_pata_imx_data imx27_pata_imx_data __initconst =
- imx_pata_imx_data_entry_single(MX27, SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_pata_imx_data imx31_pata_imx_data __initconst =
- imx_pata_imx_data_entry_single(MX31, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_pata_imx_data imx35_pata_imx_data __initconst =
- imx_pata_imx_data_entry_single(MX35, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_pata_imx(
- const struct imx_pata_imx_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device("pata_imx", -1,
- res, ARRAY_SIZE(res), NULL, 0);
-}
-
diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
deleted file mode 100644
index 40c2610..0000000
--- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix, Wolfram Sang <kernel@pengutronix.de>
- */
-
-#include <linux/platform_data/mmc-esdhc-imx.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \
- { \
- .devid = _devid, \
- .id = _id, \
- .iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR, \
- .irq = soc ## _INT_ESDHC ## hwid, \
- }
-
-#define imx_sdhci_esdhc_imx_data_entry(soc, devid, id, hwid) \
- [id] = imx_sdhci_esdhc_imx_data_entry_single(soc, devid, id, hwid)
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_sdhci_esdhc_imx_data
-imx35_sdhci_esdhc_imx_data[] __initconst = {
-#define imx35_sdhci_esdhc_imx_data_entry(_id, _hwid) \
- imx_sdhci_esdhc_imx_data_entry(MX35, "sdhci-esdhc-imx35", _id, _hwid)
- imx35_sdhci_esdhc_imx_data_entry(0, 1),
- imx35_sdhci_esdhc_imx_data_entry(1, 2),
- imx35_sdhci_esdhc_imx_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-static const struct esdhc_platform_data default_esdhc_pdata __initconst = {
- .wp_type = ESDHC_WP_NONE,
- .cd_type = ESDHC_CD_NONE,
-};
-
-struct platform_device *__init imx_add_sdhci_esdhc_imx(
- const struct imx_sdhci_esdhc_imx_data *data,
- const struct esdhc_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- /*
- * If machine does not provide pdata, use the default one
- * which means no WP/CD support
- */
- if (!pdata)
- pdata = &default_esdhc_pdata;
-
- return imx_add_platform_device_dmamask(data->devid, data->id, res,
- ARRAY_SIZE(res), pdata, sizeof(*pdata),
- DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c
deleted file mode 100644
index 27747bf..0000000
--- a/arch/arm/mach-imx/devices/platform-spi_imx.c
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/gpio/machine.h>
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \
- { \
- .devid = _devid, \
- .id = _id, \
- .iobase = soc ## _ ## type ## hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_ ## type ## hwid, \
- }
-
-#define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size) \
- [id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size)
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
-#define imx21_cspi_data_entry(_id, _hwid) \
- imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K)
- imx21_cspi_data_entry(0, 1),
- imx21_cspi_data_entry(1, 2),
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_spi_imx_data imx27_cspi_data[] __initconst = {
-#define imx27_cspi_data_entry(_id, _hwid) \
- imx_spi_imx_data_entry(MX27, CSPI, "imx27-cspi", _id, _hwid, SZ_4K)
- imx27_cspi_data_entry(0, 1),
- imx27_cspi_data_entry(1, 2),
- imx27_cspi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_spi_imx_data imx31_cspi_data[] __initconst = {
-#define imx31_cspi_data_entry(_id, _hwid) \
- imx_spi_imx_data_entry(MX31, CSPI, "imx31-cspi", _id, _hwid, SZ_4K)
- imx31_cspi_data_entry(0, 1),
- imx31_cspi_data_entry(1, 2),
- imx31_cspi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_spi_imx_data imx35_cspi_data[] __initconst = {
-#define imx35_cspi_data_entry(_id, _hwid) \
- imx_spi_imx_data_entry(MX35, CSPI, "imx35-cspi", _id, _hwid, SZ_4K)
- imx35_cspi_data_entry(0, 1),
- imx35_cspi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_spi_imx(
- const struct imx_spi_imx_data *data, struct gpiod_lookup_table *gtable)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- if (gtable)
- gpiod_add_lookup_table(gtable);
- return imx_add_platform_device(data->devid, data->id,
- res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c
deleted file mode 100644
index 83962ce..0000000
--- a/arch/arm/mach-imx/ehci-imx27.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/platform_data/usb-ehci-mxc.h>
-
-#include "ehci.h"
-#include "hardware.h"
-
-#define USBCTRL_OTGBASE_OFFSET 0x600
-
-#define MX27_OTG_SIC_SHIFT 29
-#define MX27_OTG_SIC_MASK (0x3 << MX27_OTG_SIC_SHIFT)
-#define MX27_OTG_PM_BIT (1 << 24)
-
-#define MX27_H2_SIC_SHIFT 21
-#define MX27_H2_SIC_MASK (0x3 << MX27_H2_SIC_SHIFT)
-#define MX27_H2_PM_BIT (1 << 16)
-#define MX27_H2_DT_BIT (1 << 5)
-
-#define MX27_H1_SIC_SHIFT 13
-#define MX27_H1_SIC_MASK (0x3 << MX27_H1_SIC_SHIFT)
-#define MX27_H1_PM_BIT (1 << 8)
-#define MX27_H1_DT_BIT (1 << 4)
-
-int mx27_initialize_usb_hw(int port, unsigned int flags)
-{
- unsigned int v;
-
- v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
- switch (port) {
- case 0: /* OTG port */
- v &= ~(MX27_OTG_SIC_MASK | MX27_OTG_PM_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_OTG_SIC_SHIFT;
-
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX27_OTG_PM_BIT;
- break;
- case 1: /* H1 port */
- v &= ~(MX27_H1_SIC_MASK | MX27_H1_PM_BIT | MX27_H1_DT_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H1_SIC_SHIFT;
-
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX27_H1_PM_BIT;
-
- if (!(flags & MXC_EHCI_TTL_ENABLED))
- v |= MX27_H1_DT_BIT;
-
- break;
- case 2: /* H2 port */
- v &= ~(MX27_H2_SIC_MASK | MX27_H2_PM_BIT | MX27_H2_DT_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H2_SIC_SHIFT;
-
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX27_H2_PM_BIT;
-
- if (!(flags & MXC_EHCI_TTL_ENABLED))
- v |= MX27_H2_DT_BIT;
-
- break;
- default:
- return -EINVAL;
- }
-
- writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
- return 0;
-}
-
diff --git a/arch/arm/mach-imx/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c
deleted file mode 100644
index d6d794d..0000000
--- a/arch/arm/mach-imx/ehci-imx31.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/platform_data/usb-ehci-mxc.h>
-
-#include "ehci.h"
-#include "hardware.h"
-
-#define USBCTRL_OTGBASE_OFFSET 0x600
-
-#define MX31_OTG_SIC_SHIFT 29
-#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT)
-#define MX31_OTG_PM_BIT (1 << 24)
-
-#define MX31_H2_SIC_SHIFT 21
-#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT)
-#define MX31_H2_PM_BIT (1 << 16)
-#define MX31_H2_DT_BIT (1 << 5)
-
-#define MX31_H1_SIC_SHIFT 13
-#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT)
-#define MX31_H1_PM_BIT (1 << 8)
-#define MX31_H1_DT_BIT (1 << 4)
-
-int mx31_initialize_usb_hw(int port, unsigned int flags)
-{
- unsigned int v;
-
- v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
- switch (port) {
- case 0: /* OTG port */
- v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT;
-
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX31_OTG_PM_BIT;
-
- break;
- case 1: /* H1 port */
- v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT;
-
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX31_H1_PM_BIT;
-
- if (!(flags & MXC_EHCI_TTL_ENABLED))
- v |= MX31_H1_DT_BIT;
-
- break;
- case 2: /* H2 port */
- v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT;
-
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX31_H2_PM_BIT;
-
- if (!(flags & MXC_EHCI_TTL_ENABLED))
- v |= MX31_H2_DT_BIT;
-
- break;
- default:
- return -EINVAL;
- }
-
- writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c
deleted file mode 100644
index e6ba965..0000000
--- a/arch/arm/mach-imx/ehci-imx35.c
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/platform_data/usb-ehci-mxc.h>
-
-#include "ehci.h"
-#include "hardware.h"
-
-#define USBCTRL_OTGBASE_OFFSET 0x600
-
-#define MX35_OTG_SIC_SHIFT 29
-#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT)
-#define MX35_OTG_PM_BIT (1 << 24)
-#define MX35_OTG_PP_BIT (1 << 11)
-#define MX35_OTG_OCPOL_BIT (1 << 3)
-
-#define MX35_H1_SIC_SHIFT 21
-#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT)
-#define MX35_H1_PP_BIT (1 << 18)
-#define MX35_H1_PM_BIT (1 << 16)
-#define MX35_H1_IPPUE_UP_BIT (1 << 7)
-#define MX35_H1_IPPUE_DOWN_BIT (1 << 6)
-#define MX35_H1_TLL_BIT (1 << 5)
-#define MX35_H1_USBTE_BIT (1 << 4)
-#define MX35_H1_OCPOL_BIT (1 << 2)
-
-int mx35_initialize_usb_hw(int port, unsigned int flags)
-{
- unsigned int v;
-
- v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
- switch (port) {
- case 0: /* OTG port */
- v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT |
- MX35_OTG_OCPOL_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
-
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX35_OTG_PM_BIT;
-
- if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
- v |= MX35_OTG_PP_BIT;
-
- if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
- v |= MX35_OTG_OCPOL_BIT;
-
- break;
- case 1: /* H1 port */
- v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT |
- MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT | MX35_H1_USBTE_BIT |
- MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
-
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX35_H1_PM_BIT;
-
- if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
- v |= MX35_H1_PP_BIT;
-
- if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
- v |= MX35_H1_OCPOL_BIT;
-
- if (!(flags & MXC_EHCI_TTL_ENABLED))
- v |= MX35_H1_TLL_BIT;
-
- if (flags & MXC_EHCI_INTERNAL_PHY)
- v |= MX35_H1_USBTE_BIT;
-
- if (flags & MXC_EHCI_IPPUE_DOWN)
- v |= MX35_H1_IPPUE_DOWN_BIT;
-
- if (flags & MXC_EHCI_IPPUE_UP)
- v |= MX35_H1_IPPUE_UP_BIT;
-
- break;
- default:
- return -EINVAL;
- }
-
- writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/ehci.h b/arch/arm/mach-imx/ehci.h
deleted file mode 100644
index b7ad617..0000000
--- a/arch/arm/mach-imx/ehci.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_IMX_EHCI_H
-#define __MACH_IMX_EHCI_H
-
-/* values for portsc field */
-#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
-#define MXC_EHCI_FORCE_FS (1 << 24)
-#define MXC_EHCI_UTMI_8BIT (0 << 28)
-#define MXC_EHCI_UTMI_16BIT (1 << 28)
-#define MXC_EHCI_SERIAL (1 << 29)
-#define MXC_EHCI_MODE_UTMI (0 << 30)
-#define MXC_EHCI_MODE_PHILIPS (1 << 30)
-#define MXC_EHCI_MODE_ULPI (2 << 30)
-#define MXC_EHCI_MODE_SERIAL (3 << 30)
-
-/* values for flags field */
-#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
-#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
-#define MXC_EHCI_INTERFACE_MASK (0xf)
-
-#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
-#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6)
-#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7)
-#define MXC_EHCI_TTL_ENABLED (1 << 8)
-
-#define MXC_EHCI_INTERNAL_PHY (1 << 9)
-#define MXC_EHCI_IPPUE_DOWN (1 << 10)
-#define MXC_EHCI_IPPUE_UP (1 << 11)
-#define MXC_EHCI_WAKEUP_ENABLED (1 << 12)
-#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13)
-
-#define MXC_USBCTRL_OFFSET 0
-#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
-#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
-#define MXC_USBH2CTRL_OFFSET 0x14
-
-int mx25_initialize_usb_hw(int port, unsigned int flags);
-int mx31_initialize_usb_hw(int port, unsigned int flags);
-int mx35_initialize_usb_hw(int port, unsigned int flags);
-int mx27_initialize_usb_hw(int port, unsigned int flags);
-
-#endif /* __MACH_IMX_EHCI_H */
diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h
index 92c5a9c..7acf7ce 100644
--- a/arch/arm/mach-imx/hardware.h
+++ b/arch/arm/mach-imx/hardware.h
@@ -97,7 +97,6 @@
#include "mx31.h"
#include "mx35.h"
#include "mx2x.h"
-#include "mx21.h"
#include "mx27.h"
#define imx_map_entry(soc, name, _type) { \
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
deleted file mode 100644
index 29d97bd..0000000
--- a/arch/arm/mach-imx/imx27-dt.c
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- */
-
-#include <linux/irq.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "mx27.h"
-
-static const char * const imx27_dt_board_compat[] __initconst = {
- "fsl,imx27",
- NULL
-};
-
-DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
- .map_io = mx27_map_io,
- .init_early = imx27_init_early,
- .init_irq = mx27_init_irq,
- .init_late = imx27_pm_init,
- .dt_compat = imx27_dt_board_compat,
-MACHINE_END
diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c
deleted file mode 100644
index abfc306..0000000
--- a/arch/arm/mach-imx/iomux-imx31.c
+++ /dev/null
@@ -1,161 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
- */
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-
-#include "hardware.h"
-#include "iomux-mx3.h"
-
-/*
- * IOMUX register (base) addresses
- */
-#define IOMUX_BASE MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
-#define IOMUXINT_OBS1 (IOMUX_BASE + 0x000)
-#define IOMUXINT_OBS2 (IOMUX_BASE + 0x004)
-#define IOMUXGPR (IOMUX_BASE + 0x008)
-#define IOMUXSW_MUX_CTL (IOMUX_BASE + 0x00C)
-#define IOMUXSW_PAD_CTL (IOMUX_BASE + 0x154)
-
-static DEFINE_SPINLOCK(gpio_mux_lock);
-
-#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
-
-static DECLARE_BITMAP(mxc_pin_alloc_map, NB_PORTS * 32);
-/*
- * set the mode for a IOMUX pin.
- */
-void mxc_iomux_mode(unsigned int pin_mode)
-{
- u32 field;
- u32 l;
- u32 mode;
- void __iomem *reg;
-
- reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
- field = pin_mode & 0x3;
- mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
-
- spin_lock(&gpio_mux_lock);
-
- l = imx_readl(reg);
- l &= ~(0xff << (field * 8));
- l |= mode << (field * 8);
- imx_writel(l, reg);
-
- spin_unlock(&gpio_mux_lock);
-}
-
-/*
- * This function configures the pad value for a IOMUX pin.
- */
-void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
-{
- u32 field, l;
- void __iomem *reg;
-
- pin &= IOMUX_PADNUM_MASK;
- reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
- field = (pin + 2) % 3;
-
- pr_debug("%s: reg offset = 0x%x, field = %d\n",
- __func__, (pin + 2) / 3, field);
-
- spin_lock(&gpio_mux_lock);
-
- l = imx_readl(reg);
- l &= ~(0x1ff << (field * 10));
- l |= config << (field * 10);
- imx_writel(l, reg);
-
- spin_unlock(&gpio_mux_lock);
-}
-
-/*
- * allocs a single pin:
- * - reserves the pin so that it is not claimed by another driver
- * - setups the iomux according to the configuration
- */
-int mxc_iomux_alloc_pin(unsigned int pin, const char *label)
-{
- unsigned pad = pin & IOMUX_PADNUM_MASK;
-
- if (pad >= (PIN_MAX + 1)) {
- printk(KERN_ERR "mxc_iomux: Attempt to request nonexistent pin %u for \"%s\"\n",
- pad, label ? label : "?");
- return -EINVAL;
- }
-
- if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
- printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
- pad, label ? label : "?");
- return -EBUSY;
- }
- mxc_iomux_mode(pin);
-
- return 0;
-}
-
-int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
- const char *label)
-{
- const unsigned int *p = pin_list;
- int i;
- int ret = -EINVAL;
-
- for (i = 0; i < count; i++) {
- ret = mxc_iomux_alloc_pin(*p, label);
- if (ret)
- goto setup_error;
- p++;
- }
- return 0;
-
-setup_error:
- mxc_iomux_release_multiple_pins(pin_list, i);
- return ret;
-}
-
-void mxc_iomux_release_pin(unsigned int pin)
-{
- unsigned pad = pin & IOMUX_PADNUM_MASK;
-
- if (pad < (PIN_MAX + 1))
- clear_bit(pad, mxc_pin_alloc_map);
-}
-
-void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
-{
- const unsigned int *p = pin_list;
- int i;
-
- for (i = 0; i < count; i++) {
- mxc_iomux_release_pin(*p);
- p++;
- }
-}
-
-/*
- * This function enables/disables the general purpose function for a particular
- * signal.
- */
-void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
-{
- u32 l;
-
- spin_lock(&gpio_mux_lock);
- l = imx_readl(IOMUXGPR);
- if (en)
- l |= gp;
- else
- l &= ~gp;
-
- imx_writel(l, IOMUXGPR);
- spin_unlock(&gpio_mux_lock);
-}
diff --git a/arch/arm/mach-imx/iomux-mx21.h b/arch/arm/mach-imx/iomux-mx21.h
deleted file mode 100644
index 6eab347..0000000
--- a/arch/arm/mach-imx/iomux-mx21.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
- */
-#ifndef __MACH_IOMUX_MX21_H__
-#define __MACH_IOMUX_MX21_H__
-
-#include "iomux-mx2x.h"
-#include "iomux-v1.h"
-
-/* Primary GPIO pin functions */
-
-#define PB22_PF_USBH1_BYP (GPIO_PORTB | GPIO_PF | 22)
-#define PB25_PF_USBH1_ON (GPIO_PORTB | GPIO_PF | 25)
-#define PC5_PF_USBOTG_SDA (GPIO_PORTC | GPIO_PF | 5)
-#define PC6_PF_USBOTG_SCL (GPIO_PORTC | GPIO_PF | 6)
-#define PC7_PF_USBOTG_ON (GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_USBOTG_FS (GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_USBOTG_OE (GPIO_PORTC | GPIO_PF | 9)
-#define PC10_PF_USBOTG_TXDM (GPIO_PORTC | GPIO_PF | 10)
-#define PC11_PF_USBOTG_TXDP (GPIO_PORTC | GPIO_PF | 11)
-#define PC12_PF_USBOTG_RXDM (GPIO_PORTC | GPIO_PF | 12)
-#define PC13_PF_USBOTG_RXDP (GPIO_PORTC | GPIO_PF | 13)
-#define PC16_PF_SAP_FS (GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SAP_RXD (GPIO_PORTC | GPIO_PF | 17)
-#define PC18_PF_SAP_TXD (GPIO_PORTC | GPIO_PF | 18)
-#define PC19_PF_SAP_CLK (GPIO_PORTC | GPIO_PF | 19)
-#define PE0_PF_TEST_WB2 (GPIO_PORTE | GPIO_PF | 0)
-#define PE1_PF_TEST_WB1 (GPIO_PORTE | GPIO_PF | 1)
-#define PE2_PF_TEST_WB0 (GPIO_PORTE | GPIO_PF | 2)
-#define PF1_PF_NFCE (GPIO_PORTF | GPIO_PF | 1)
-#define PF3_PF_NFCLE (GPIO_PORTF | GPIO_PF | 3)
-#define PF7_PF_NFIO0 (GPIO_PORTF | GPIO_PF | 7)
-#define PF8_PF_NFIO1 (GPIO_PORTF | GPIO_PF | 8)
-#define PF9_PF_NFIO2 (GPIO_PORTF | GPIO_PF | 9)
-#define PF10_PF_NFIO3 (GPIO_PORTF | GPIO_PF | 10)
-#define PF11_PF_NFIO4 (GPIO_PORTF | GPIO_PF | 11)
-#define PF12_PF_NFIO5 (GPIO_PORTF | GPIO_PF | 12)
-#define PF13_PF_NFIO6 (GPIO_PORTF | GPIO_PF | 13)
-#define PF14_PF_NFIO7 (GPIO_PORTF | GPIO_PF | 14)
-#define PF16_PF_RES (GPIO_PORTF | GPIO_PF | 16)
-
-/* Alternate GPIO pin functions */
-
-#define PA5_AF_BMI_CLK_CS (GPIO_PORTA | GPIO_AF | 5)
-#define PA6_AF_BMI_D0 (GPIO_PORTA | GPIO_AF | 6)
-#define PA7_AF_BMI_D1 (GPIO_PORTA | GPIO_AF | 7)
-#define PA8_AF_BMI_D2 (GPIO_PORTA | GPIO_AF | 8)
-#define PA9_AF_BMI_D3 (GPIO_PORTA | GPIO_AF | 9)
-#define PA10_AF_BMI_D4 (GPIO_PORTA | GPIO_AF | 10)
-#define PA11_AF_BMI_D5 (GPIO_PORTA | GPIO_AF | 11)
-#define PA12_AF_BMI_D6 (GPIO_PORTA | GPIO_AF | 12)
-#define PA13_AF_BMI_D7 (GPIO_PORTA | GPIO_AF | 13)
-#define PA14_AF_BMI_D8 (GPIO_PORTA | GPIO_AF | 14)
-#define PA15_AF_BMI_D9 (GPIO_PORTA | GPIO_AF | 15)
-#define PA16_AF_BMI_D10 (GPIO_PORTA | GPIO_AF | 16)
-#define PA17_AF_BMI_D11 (GPIO_PORTA | GPIO_AF | 17)
-#define PA18_AF_BMI_D12 (GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_BMI_D13 (GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_BMI_D14 (GPIO_PORTA | GPIO_AF | 20)
-#define PA21_AF_BMI_D15 (GPIO_PORTA | GPIO_AF | 21)
-#define PA22_AF_BMI_READ_REQ (GPIO_PORTA | GPIO_AF | 22)
-#define PA23_AF_BMI_WRITE (GPIO_PORTA | GPIO_AF | 23)
-#define PA29_AF_BMI_RX_FULL (GPIO_PORTA | GPIO_AF | 29)
-#define PA30_AF_BMI_READ (GPIO_PORTA | GPIO_AF | 30)
-
-/* AIN GPIO pin functions */
-
-#define PC14_AIN_SYS_CLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
-#define PD21_AIN_USBH2_FS (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21)
-#define PD22_AIN_USBH2_OE (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22)
-#define PD23_AIN_USBH2_TXDM (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23)
-#define PD24_AIN_USBH2_TXDP (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24)
-#define PE8_AIN_IR_TXD (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8)
-#define PF0_AIN_PC_RST (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0)
-#define PF1_AIN_PC_CE1 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1)
-#define PF2_AIN_PC_CE2 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2)
-#define PF3_AIN_PC_POE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3)
-#define PF4_AIN_PC_OE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4)
-#define PF5_AIN_PC_RW (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5)
-
-/* BIN GPIO pin functions */
-
-#define PC14_BIN_SYS_CLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
-#define PD27_BIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27)
-
-/* CIN GPIO pin functions */
-
-#define PB26_CIN_USBH1_RXDAT (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26)
-
-/* AOUT GPIO pin functions */
-
-#define PA29_AOUT_BMI_WAIT (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29)
-#define PD19_AOUT_USBH2_RXDM (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19)
-#define PD20_AOUT_USBH2_RXDP (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20)
-#define PD25_AOUT_EXT_DMAREQ (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25)
-#define PD26_AOUT_USBOTG_RXDAT (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26)
-#define PE9_AOUT_IR_RXD (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9)
-#define PF6_AOUT_PC_BVD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6)
-#define PF7_AOUT_PC_BVD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7)
-#define PF8_AOUT_PC_VS2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8)
-#define PF9_AOUT_PC_VS1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9)
-#define PF10_AOUT_PC_WP (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10)
-#define PF11_AOUT_PC_READY (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11)
-#define PF12_AOUT_PC_WAIT (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12)
-#define PF13_AOUT_PC_CD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13)
-#define PF14_AOUT_PC_CD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14)
-
-#endif /* ifndef __MACH_IOMUX_MX21_H__ */
diff --git a/arch/arm/mach-imx/iomux-mx27.h b/arch/arm/mach-imx/iomux-mx27.h
deleted file mode 100644
index 4d848d1..0000000
--- a/arch/arm/mach-imx/iomux-mx27.h
+++ /dev/null
@@ -1,192 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
- */
-#ifndef __MACH_IOMUX_MX27_H__
-#define __MACH_IOMUX_MX27_H__
-
-#include "iomux-mx2x.h"
-#include "iomux-v1.h"
-
-/* Primary GPIO pin functions */
-
-#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0)
-#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2)
-#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4)
-#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22)
-#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25)
-#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
-#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_PF | GPIO_IN | 6)
-#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7)
-#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8)
-#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
-#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10)
-#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
-#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12)
-#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13)
-#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 16)
-#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 17)
-#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 18)
-#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 19)
-#define PD0_PF_SD3_CMD (GPIO_PORTD | GPIO_PF | 0)
-#define PD1_PF_SD3_CLK (GPIO_PORTD | GPIO_PF | 1)
-#define PD2_PF_ATA_DATA0 (GPIO_PORTD | GPIO_PF | 2)
-#define PD3_PF_ATA_DATA1 (GPIO_PORTD | GPIO_PF | 3)
-#define PD4_PF_ATA_DATA2 (GPIO_PORTD | GPIO_PF | 4)
-#define PD5_PF_ATA_DATA3 (GPIO_PORTD | GPIO_PF | 5)
-#define PD6_PF_ATA_DATA4 (GPIO_PORTD | GPIO_PF | 6)
-#define PD7_PF_ATA_DATA5 (GPIO_PORTD | GPIO_PF | 7)
-#define PD8_PF_ATA_DATA6 (GPIO_PORTD | GPIO_PF | 8)
-#define PD9_PF_ATA_DATA7 (GPIO_PORTD | GPIO_PF | 9)
-#define PD10_PF_ATA_DATA8 (GPIO_PORTD | GPIO_PF | 10)
-#define PD11_PF_ATA_DATA9 (GPIO_PORTD | GPIO_PF | 11)
-#define PD12_PF_ATA_DATA10 (GPIO_PORTD | GPIO_PF | 12)
-#define PD13_PF_ATA_DATA11 (GPIO_PORTD | GPIO_PF | 13)
-#define PD14_PF_ATA_DATA12 (GPIO_PORTD | GPIO_PF | 14)
-#define PD15_PF_ATA_DATA13 (GPIO_PORTD | GPIO_PF | 15)
-#define PD16_PF_ATA_DATA14 (GPIO_PORTD | GPIO_PF | 16)
-#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0)
-#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1)
-#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2)
-#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24)
-#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25)
-#define PF1_PF_NFCLE (GPIO_PORTF | GPIO_PF | 1)
-#define PF3_PF_NFCE (GPIO_PORTF | GPIO_PF | 3)
-#define PF7_PF_PC_POE (GPIO_PORTF | GPIO_PF | 7)
-#define PF8_PF_PC_RW (GPIO_PORTF | GPIO_PF | 8)
-#define PF9_PF_PC_IOIS16 (GPIO_PORTF | GPIO_PF | 9)
-#define PF10_PF_PC_RST (GPIO_PORTF | GPIO_PF | 10)
-#define PF11_PF_PC_BVD2 (GPIO_PORTF | GPIO_PF | 11)
-#define PF12_PF_PC_BVD1 (GPIO_PORTF | GPIO_PF | 12)
-#define PF13_PF_PC_VS2 (GPIO_PORTF | GPIO_PF | 13)
-#define PF14_PF_PC_VS1 (GPIO_PORTF | GPIO_PF | 14)
-#define PF16_PF_PC_PWRON (GPIO_PORTF | GPIO_PF | 16)
-#define PF17_PF_PC_READY (GPIO_PORTF | GPIO_PF | 17)
-#define PF18_PF_PC_WAIT (GPIO_PORTF | GPIO_PF | 18)
-#define PF19_PF_PC_CD2 (GPIO_PORTF | GPIO_PF | 19)
-#define PF20_PF_PC_CD1 (GPIO_PORTF | GPIO_PF | 20)
-#define PF23_PF_ATA_DATA15 (GPIO_PORTF | GPIO_PF | 23)
-
-/* Alternate GPIO pin functions */
-
-#define PB4_AF_MSHC_DATA0 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4)
-#define PB5_AF_MSHC_DATA1 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5)
-#define PB6_AF_MSHC_DATA2 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6)
-#define PB7_AF_MSHC_DATA4 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7)
-#define PB8_AF_MSHC_BS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8)
-#define PB9_AF_MSHC_SCLK (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9)
-#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10)
-#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 11)
-#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12)
-#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 13)
-#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18)
-#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 19)
-#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20)
-#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 21)
-#define PC8_AF_FEC_MDIO (GPIO_PORTC | GPIO_AF | GPIO_IN | 8)
-#define PC24_AF_GPT5_TOUT (GPIO_PORTC | GPIO_AF | 24)
-#define PC25_AF_GPT5_TIN (GPIO_PORTC | GPIO_AF | 25)
-#define PC26_AF_GPT4_TOUT (GPIO_PORTC | GPIO_AF | 26)
-#define PC27_AF_GPT4_TIN (GPIO_PORTC | GPIO_AF | 27)
-#define PD1_AF_ETMTRACE_PKT15 (GPIO_PORTD | GPIO_AF | 1)
-#define PD6_AF_ETMTRACE_PKT14 (GPIO_PORTD | GPIO_AF | 6)
-#define PD7_AF_ETMTRACE_PKT13 (GPIO_PORTD | GPIO_AF | 7)
-#define PD9_AF_ETMTRACE_PKT12 (GPIO_PORTD | GPIO_AF | 9)
-#define PD2_AF_SD3_D0 (GPIO_PORTD | GPIO_AF | 2)
-#define PD3_AF_SD3_D1 (GPIO_PORTD | GPIO_AF | 3)
-#define PD4_AF_SD3_D2 (GPIO_PORTD | GPIO_AF | 4)
-#define PD5_AF_SD3_D3 (GPIO_PORTD | GPIO_AF | 5)
-#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_AF | GPIO_IN | 8)
-#define PD10_AF_ETMTRACE_PKT11 (GPIO_PORTD | GPIO_AF | 10)
-#define PD11_AF_ETMTRACE_PKT10 (GPIO_PORTD | GPIO_AF | 11)
-#define PD12_AF_ETMTRACE_PKT9 (GPIO_PORTD | GPIO_AF | 12)
-#define PD13_AF_ETMTRACE_PKT8 (GPIO_PORTD | GPIO_AF | 13)
-#define PD14_AF_ETMTRACE_PKT7 (GPIO_PORTD | GPIO_AF | 14)
-#define PD15_AF_ETMTRACE_PKT6 (GPIO_PORTD | GPIO_AF | 15)
-#define PD16_AF_ETMTRACE_PKT5 (GPIO_PORTD | GPIO_AF | 16)
-#define PF1_AF_ETMTRACE_PKT0 (GPIO_PORTF | GPIO_AF | 1)
-#define PF3_AF_ETMTRACE_PKT2 (GPIO_PORTF | GPIO_AF | 3)
-#define PF5_AF_ETMPIPESTAT11 (GPIO_PORTF | GPIO_AF | 5)
-#define PF7_AF_ATA_BUFFER_EN (GPIO_PORTF | GPIO_AF | 7)
-#define PF8_AF_ATA_IORDY (GPIO_PORTF | GPIO_AF | 8)
-#define PF9_AF_ATA_INTRQ (GPIO_PORTF | GPIO_AF | 9)
-#define PF10_AF_ATA_RESET (GPIO_PORTF | GPIO_AF | 10)
-#define PF11_AF_ATA_DMACK (GPIO_PORTF | GPIO_AF | 11)
-#define PF12_AF_ATA_DMAREQ (GPIO_PORTF | GPIO_AF | 12)
-#define PF13_AF_ATA_DA0 (GPIO_PORTF | GPIO_AF | 13)
-#define PF14_AF_ATA_DA1 (GPIO_PORTF | GPIO_AF | 14)
-#define PF15_AF_ETMTRACE_SYNC (GPIO_PORTF | GPIO_AF | 15)
-#define PF16_AF_ATA_DA2 (GPIO_PORTF | GPIO_AF | 16)
-#define PF17_AF_ATA_CS0 (GPIO_PORTF | GPIO_AF | 17)
-#define PF18_AF_ATA_CS1 (GPIO_PORTF | GPIO_AF | 18)
-#define PF19_AF_ATA_DIOW (GPIO_PORTF | GPIO_AF | 19)
-#define PF20_AF_ATA_DIOR (GPIO_PORTF | GPIO_AF | 20)
-#define PF22_AF_ETMTRACE_CLK (GPIO_PORTF | GPIO_AF | 22)
-#define PF23_AF_ETMTRACE_PKT4 (GPIO_PORTF | GPIO_AF | 23)
-
-/* AIN GPIO pin functions */
-
-#define PC14_AIN_SSI1_MCLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
-#define PC15_AIN_GPT6_TOUT (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15)
-#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0)
-#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1)
-#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2)
-#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3)
-#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9)
-#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16)
-#define PD27_AIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27)
-#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23)
-
-/* BIN GPIO pin functions */
-
-#define PC14_BIN_SSI2_MCLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
-
-/* CIN GPIO pin functions */
-
-#define PD2_CIN_SLCDC1_DAT0 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2)
-#define PD3_CIN_SLCDC1_DAT1 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3)
-#define PD4_CIN_SLCDC1_DAT2 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4)
-#define PD5_CIN_SLCDC1_DAT3 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5)
-#define PD6_CIN_SLCDC1_DAT4 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6)
-#define PD7_CIN_SLCDC1_DAT5 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7)
-#define PD8_CIN_SLCDC1_DAT6 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8)
-#define PD9_CIN_SLCDC1_DAT7 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9)
-#define PD10_CIN_SLCDC1_DAT8 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10)
-#define PD11_CIN_SLCDC1_DAT9 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11)
-#define PD12_CIN_SLCDC1_DAT10 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12)
-#define PD13_CIN_SLCDC1_DAT11 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13)
-#define PD14_CIN_SLCDC1_DAT12 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14)
-#define PD15_CIN_SLCDC1_DAT13 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15)
-#define PD16_CIN_SLCDC1_DAT14 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16)
-#define PD23_CIN_SLCDC1_DAT15 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23)
-#define PF27_CIN_EXT_DMA_GRANT (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27)
-/* LCDC_TESTx on PBxx omitted, because it's not clear what they do */
-
-/* AOUT GPIO pin functions */
-
-#define PC14_AOUT_GPT6_TIN (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14)
-#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4)
-#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5)
-#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6)
-#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7)
-#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10)
-#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11)
-#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12)
-#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13)
-#define PD14_AOUT_FEC_RX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14)
-#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15)
-
-/* BOUT GPIO pin functions */
-
-#define PC17_BOUT_PC_IOIS16 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17)
-#define PC18_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18)
-#define PC19_BOUT_PC_BVD1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19)
-#define PC28_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28)
-#define PC29_BOUT_PC_VS1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29)
-#define PC30_BOUT_PC_READY (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30)
-#define PC31_BOUT_PC_WAIT (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31)
-
-#endif /* __MACH_IOMUX_MX27_H__ */
diff --git a/arch/arm/mach-imx/iomux-mx2x.h b/arch/arm/mach-imx/iomux-mx2x.h
deleted file mode 100644
index ce6b6d2..0000000
--- a/arch/arm/mach-imx/iomux-mx2x.h
+++ /dev/null
@@ -1,217 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
- */
-#ifndef __MACH_IOMUX_MX2x_H__
-#define __MACH_IOMUX_MX2x_H__
-
-/* Primary GPIO pin functions */
-
-#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5)
-#define PA6_PF_LD0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6)
-#define PA7_PF_LD1 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7)
-#define PA8_PF_LD2 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8)
-#define PA9_PF_LD3 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9)
-#define PA10_PF_LD4 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10)
-#define PA11_PF_LD5 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11)
-#define PA12_PF_LD6 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12)
-#define PA13_PF_LD7 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13)
-#define PA14_PF_LD8 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14)
-#define PA15_PF_LD9 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
-#define PA16_PF_LD10 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
-#define PA17_PF_LD11 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17)
-#define PA18_PF_LD12 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18)
-#define PA19_PF_LD13 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19)
-#define PA20_PF_LD14 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20)
-#define PA21_PF_LD15 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21)
-#define PA22_PF_LD16 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22)
-#define PA23_PF_LD17 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23)
-#define PA24_PF_REV (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24)
-#define PA25_PF_CLS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25)
-#define PA26_PF_PS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26)
-#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27)
-#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28)
-#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29)
-#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30)
-#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31)
-#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4)
-#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5)
-#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6)
-#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7)
-#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8)
-#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9)
-#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10)
-#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11)
-#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12)
-#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13)
-#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14)
-#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15)
-#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16)
-#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17)
-#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18)
-#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19)
-#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20)
-#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21)
-#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USB_OC (GPIO_PORTB | GPIO_PF | 24)
-#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBH1_OE (GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28)
-#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29)
-#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30)
-#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31)
-#define PC14_PF_TOUT (GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_TIN (GPIO_PORTC | GPIO_PF | 15)
-#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 20)
-#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 21)
-#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 22)
-#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 23)
-#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 24)
-#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 25)
-#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 26)
-#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 27)
-#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 28)
-#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 29)
-#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 30)
-#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
-#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
-#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
-#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
-#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
-#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
-#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 23)
-#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
-#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
-#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
-#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
-#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
-#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
-#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 30)
-#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31)
-#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3)
-#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 4)
-#define PE5_PF_PWMO (GPIO_PORTE | GPIO_PF | 5)
-#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6)
-#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 7)
-#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8)
-#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 9)
-#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10)
-#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 11)
-#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12)
-#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 13)
-#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14)
-#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 15)
-#define PE16_PF_RTCK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16)
-#define PE17_PF_RESET_OUT (GPIO_PORTE | GPIO_PF | 17)
-#define PE18_PF_SD1_D0 (GPIO_PORTE | GPIO_PF | 18)
-#define PE19_PF_SD1_D1 (GPIO_PORTE | GPIO_PF | 19)
-#define PE20_PF_SD1_D2 (GPIO_PORTE | GPIO_PF | 20)
-#define PE21_PF_SD1_D3 (GPIO_PORTE | GPIO_PF | 21)
-#define PE22_PF_SD1_CMD (GPIO_PORTE | GPIO_PF | 22)
-#define PE23_PF_SD1_CLK (GPIO_PORTE | GPIO_PF | 23)
-#define PF0_PF_NRFB (GPIO_PORTF | GPIO_PF | 0)
-#define PF2_PF_NFWP (GPIO_PORTF | GPIO_PF | 2)
-#define PF4_PF_NFALE (GPIO_PORTF | GPIO_PF | 4)
-#define PF5_PF_NFRE (GPIO_PORTF | GPIO_PF | 5)
-#define PF6_PF_NFWE (GPIO_PORTF | GPIO_PF | 6)
-#define PF15_PF_CLKO (GPIO_PORTF | GPIO_PF | 15)
-#define PF21_PF_CS4 (GPIO_PORTF | GPIO_PF | 21)
-#define PF22_PF_CS5 (GPIO_PORTF | GPIO_PF | 22)
-
-/* Alternate GPIO pin functions */
-
-#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 26)
-#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28)
-#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29)
-#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 31)
-#define PC28_AF_SLCDC2_D0 (GPIO_PORTC | GPIO_AF | 28)
-#define PC29_AF_SLCDC2_RS (GPIO_PORTC | GPIO_AF | 29)
-#define PC30_AF_SLCDC2_CS (GPIO_PORTC | GPIO_AF | 30)
-#define PC31_AF_SLCDC2_CLK (GPIO_PORTC | GPIO_AF | 31)
-#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19)
-#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20)
-#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21)
-#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22)
-#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23)
-#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24)
-#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26)
-#define PE0_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 0)
-#define PE1_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 1)
-#define PE2_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 2)
-#define PE3_AF_KP_COL7 (GPIO_PORTE | GPIO_AF | 3)
-#define PE4_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 4)
-#define PE6_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 6)
-#define PE7_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 7)
-#define PE16_AF_OWIRE (GPIO_PORTE | GPIO_AF | 16)
-#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_AF | GPIO_IN | 18)
-#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21)
-#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22)
-#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23)
-
-/* AIN GPIO pin functions */
-
-#define PA6_AIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6)
-#define PA7_AIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7)
-#define PA8_AIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8)
-#define PA0_AIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
-#define PA11_AIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11)
-#define PA13_AIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13)
-#define PA15_AIN_SLCDC1_DAT9 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15)
-#define PA17_AIN_SLCDC1_DAT11 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
-#define PA19_AIN_SLCDC1_DAT13 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19)
-#define PA21_AIN_SLCDC1_DAT15 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21)
-#define PA22_AIN_EXT_DMAGRANT (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22)
-#define PA24_AIN_SLCDC1_D0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24)
-#define PA25_AIN_SLCDC1_RS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25)
-#define PA26_AIN_SLCDC1_CS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26)
-#define PA27_AIN_SLCDC1_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27)
-#define PB6_AIN_SLCDC1_D0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6)
-#define PB7_AIN_SLCDC1_RS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7)
-#define PB8_AIN_SLCDC1_CS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8)
-#define PB9_AIN_SLCDC1_CLK (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9)
-#define PB25_AIN_SLCDC1_DAT0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25)
-#define PB26_AIN_SLCDC1_DAT1 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26)
-#define PB27_AIN_SLCDC1_DAT2 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27)
-#define PB28_AIN_SLCDC1_DAT3 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28)
-#define PB29_AIN_SLCDC1_DAT4 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29)
-#define PB30_AIN_SLCDC1_DAT5 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30)
-#define PB31_AIN_SLCDC1_DAT6 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31)
-#define PC5_AIN_SLCDC1_DAT7 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5)
-#define PC6_AIN_SLCDC1_DAT8 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6)
-#define PC7_AIN_SLCDC1_DAT9 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7)
-#define PC8_AIN_SLCDC1_DAT10 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8)
-#define PC9_AIN_SLCDC1_DAT11 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9)
-#define PC10_AIN_SLCDC1_DAT12 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10)
-#define PC11_AIN_SLCDC1_DAT13 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11)
-#define PC12_AIN_SLCDC1_DAT14 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12)
-#define PC13_AIN_SLCDC1_DAT15 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13)
-#define PE5_AIN_PC_SPKOUT (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5)
-
-/* BIN GPIO pin functions */
-
-#define PE5_BIN_TOUT2 (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5)
-
-/* CIN GPIO pin functions */
-
-#define PA14_CIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14)
-#define PA15_CIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15)
-#define PA16_CIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16)
-#define PA17_CIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17)
-#define PA18_CIN_SLCDC1_DAT4 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18)
-#define PA19_CIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19)
-#define PA20_CIN_SLCDC1_DAT6 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20)
-#define PA21_CIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21)
-#define PB30_CIN_UART4_CTS (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30)
-#define PE5_CIN_TOUT3 (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5)
-
-/* AOUT GPIO pin functions */
-
-#define PB29_AOUT_UART4_RXD (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29)
-#define PB31_AOUT_UART4_RTS (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31)
-#define PC8_AOUT_USBOTG_TXR_INT (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 8)
-#define PC15_AOUT_WKGD (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15)
-#define PF21_AOUT_DTACK (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21)
-
-#endif /* ifndef __MACH_IOMUX_MX2x_H__ */
diff --git a/arch/arm/mach-imx/iomux-mx3.h b/arch/arm/mach-imx/iomux-mx3.h
deleted file mode 100644
index 99270a1..0000000
--- a/arch/arm/mach-imx/iomux-mx3.h
+++ /dev/null
@@ -1,706 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- */
-#ifndef __MACH_IOMUX_MX3_H__
-#define __MACH_IOMUX_MX3_H__
-
-#include <linux/types.h>
-/*
- * various IOMUX output functions
- */
-
-#define IOMUX_OCONFIG_GPIO (0 << 4) /* used as GPIO */
-#define IOMUX_OCONFIG_FUNC (1 << 4) /* used as function */
-#define IOMUX_OCONFIG_ALT1 (2 << 4) /* used as alternate function 1 */
-#define IOMUX_OCONFIG_ALT2 (3 << 4) /* used as alternate function 2 */
-#define IOMUX_OCONFIG_ALT3 (4 << 4) /* used as alternate function 3 */
-#define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */
-#define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */
-#define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */
-#define IOMUX_ICONFIG_NONE 0 /* not configured for input */
-#define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */
-#define IOMUX_ICONFIG_FUNC 2 /* used as function */
-#define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */
-#define IOMUX_ICONFIG_ALT2 8 /* used as alternate function 2 */
-
-#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO)
-#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC)
-#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1)
-#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2)
-
-/*
- * various IOMUX pad functions
- */
-enum iomux_pad_config {
- PAD_CTL_NOLOOPBACK = 0x0 << 9,
- PAD_CTL_LOOPBACK = 0x1 << 9,
- PAD_CTL_PKE_NONE = 0x0 << 8,
- PAD_CTL_PKE_ENABLE = 0x1 << 8,
- PAD_CTL_PUE_KEEPER = 0x0 << 7,
- PAD_CTL_PUE_PUD = 0x1 << 7,
- PAD_CTL_100K_PD = 0x0 << 5,
- PAD_CTL_100K_PU = 0x1 << 5,
- PAD_CTL_47K_PU = 0x2 << 5,
- PAD_CTL_22K_PU = 0x3 << 5,
- PAD_CTL_HYS_CMOS = 0x0 << 4,
- PAD_CTL_HYS_SCHMITZ = 0x1 << 4,
- PAD_CTL_ODE_CMOS = 0x0 << 3,
- PAD_CTL_ODE_OpenDrain = 0x1 << 3,
- PAD_CTL_DRV_NORMAL = 0x0 << 1,
- PAD_CTL_DRV_HIGH = 0x1 << 1,
- PAD_CTL_DRV_MAX = 0x2 << 1,
- PAD_CTL_SRE_SLOW = 0x0 << 0,
- PAD_CTL_SRE_FAST = 0x1 << 0
-};
-
-/*
- * various IOMUX general purpose functions
- */
-enum iomux_gp_func {
- MUX_PGP_FIRI = 1 << 0,
- MUX_DDR_MODE = 1 << 1,
- MUX_PGP_CSPI_BB = 1 << 2,
- MUX_PGP_ATA_1 = 1 << 3,
- MUX_PGP_ATA_2 = 1 << 4,
- MUX_PGP_ATA_3 = 1 << 5,
- MUX_PGP_ATA_4 = 1 << 6,
- MUX_PGP_ATA_5 = 1 << 7,
- MUX_PGP_ATA_6 = 1 << 8,
- MUX_PGP_ATA_7 = 1 << 9,
- MUX_PGP_ATA_8 = 1 << 10,
- MUX_PGP_UH2 = 1 << 11,
- MUX_SDCTL_CSD0_SEL = 1 << 12,
- MUX_SDCTL_CSD1_SEL = 1 << 13,
- MUX_CSPI1_UART3 = 1 << 14,
- MUX_EXTDMAREQ2_MBX_SEL = 1 << 15,
- MUX_TAMPER_DETECT_EN = 1 << 16,
- MUX_PGP_USB_4WIRE = 1 << 17,
- MUX_PGP_USB_COMMON = 1 << 18,
- MUX_SDHC_MEMSTICK1 = 1 << 19,
- MUX_SDHC_MEMSTICK2 = 1 << 20,
- MUX_PGP_SPLL_BYP = 1 << 21,
- MUX_PGP_UPLL_BYP = 1 << 22,
- MUX_PGP_MSHC1_CLK_SEL = 1 << 23,
- MUX_PGP_MSHC2_CLK_SEL = 1 << 24,
- MUX_CSPI3_UART5_SEL = 1 << 25,
- MUX_PGP_ATA_9 = 1 << 26,
- MUX_PGP_USB_SUSPEND = 1 << 27,
- MUX_PGP_USB_OTG_LOOPBACK = 1 << 28,
- MUX_PGP_USB_HS1_LOOPBACK = 1 << 29,
- MUX_PGP_USB_HS2_LOOPBACK = 1 << 30,
- MUX_CLKO_DDR_MODE = 1 << 31,
-};
-
-/*
- * setups a single pin:
- * - reserves the pin so that it is not claimed by another driver
- * - setups the iomux according to the configuration
- * - if the pin is configured as a GPIO, we claim it through kernel gpiolib
- */
-int mxc_iomux_alloc_pin(unsigned int pin, const char *label);
-/*
- * setups multiple pins
- * convenient way to call the above function with tables
- */
-int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
- const char *label);
-
-/*
- * releases a single pin:
- * - make it available for a future use by another driver
- * - frees the GPIO if the pin was configured as GPIO
- * - DOES NOT reconfigure the IOMUX in its reset state
- */
-void mxc_iomux_release_pin(unsigned int pin);
-/*
- * releases multiple pins
- * convenvient way to call the above function with tables
- */
-void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count);
-
-/*
- * This function enables/disables the general purpose function for a particular
- * signal.
- */
-void mxc_iomux_set_gpr(enum iomux_gp_func, bool en);
-
-/*
- * This function only configures the iomux hardware.
- * It is called by the setup functions and should not be called directly anymore.
- * It is here visible for backward compatibility
- */
-void mxc_iomux_mode(unsigned int pin_mode);
-
-#define IOMUX_PADNUM_MASK 0x1ff
-#define IOMUX_GPIONUM_SHIFT 9
-#define IOMUX_GPIONUM_MASK (0xff << IOMUX_GPIONUM_SHIFT)
-#define IOMUX_MODE_SHIFT 17
-#define IOMUX_MODE_MASK (0xff << IOMUX_MODE_SHIFT)
-
-#define IOMUX_PIN(gpionum, padnum) \
- (((gpionum << IOMUX_GPIONUM_SHIFT) & IOMUX_GPIONUM_MASK) | \
- (padnum & IOMUX_PADNUM_MASK))
-
-#define IOMUX_MODE(pin, mode) (pin | mode << IOMUX_MODE_SHIFT)
-
-#define IOMUX_TO_GPIO(iomux_pin) \
- ((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT)
-
-/*
- * This enumeration is constructed based on the Section
- * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
- * value is constructed based on the rules described above.
- */
-
-enum iomux_pins {
- MX31_PIN_TTM_PAD = IOMUX_PIN(0xff, 0),
- MX31_PIN_CSPI3_SPI_RDY = IOMUX_PIN(0xff, 1),
- MX31_PIN_CSPI3_SCLK = IOMUX_PIN(0xff, 2),
- MX31_PIN_CSPI3_MISO = IOMUX_PIN(0xff, 3),
- MX31_PIN_CSPI3_MOSI = IOMUX_PIN(0xff, 4),
- MX31_PIN_CLKSS = IOMUX_PIN(0xff, 5),
- MX31_PIN_CE_CONTROL = IOMUX_PIN(0xff, 6),
- MX31_PIN_ATA_RESET_B = IOMUX_PIN(95, 7),
- MX31_PIN_ATA_DMACK = IOMUX_PIN(94, 8),
- MX31_PIN_ATA_DIOW = IOMUX_PIN(93, 9),
- MX31_PIN_ATA_DIOR = IOMUX_PIN(92, 10),
- MX31_PIN_ATA_CS1 = IOMUX_PIN(91, 11),
- MX31_PIN_ATA_CS0 = IOMUX_PIN(90, 12),
- MX31_PIN_SD1_DATA3 = IOMUX_PIN(63, 13),
- MX31_PIN_SD1_DATA2 = IOMUX_PIN(62, 14),
- MX31_PIN_SD1_DATA1 = IOMUX_PIN(61, 15),
- MX31_PIN_SD1_DATA0 = IOMUX_PIN(60, 16),
- MX31_PIN_SD1_CLK = IOMUX_PIN(59, 17),
- MX31_PIN_SD1_CMD = IOMUX_PIN(58, 18),
- MX31_PIN_D3_SPL = IOMUX_PIN(0xff, 19),
- MX31_PIN_D3_CLS = IOMUX_PIN(0xff, 20),
- MX31_PIN_D3_REV = IOMUX_PIN(0xff, 21),
- MX31_PIN_CONTRAST = IOMUX_PIN(0xff, 22),
- MX31_PIN_VSYNC3 = IOMUX_PIN(0xff, 23),
- MX31_PIN_READ = IOMUX_PIN(0xff, 24),
- MX31_PIN_WRITE = IOMUX_PIN(0xff, 25),
- MX31_PIN_PAR_RS = IOMUX_PIN(0xff, 26),
- MX31_PIN_SER_RS = IOMUX_PIN(89, 27),
- MX31_PIN_LCS1 = IOMUX_PIN(88, 28),
- MX31_PIN_LCS0 = IOMUX_PIN(87, 29),
- MX31_PIN_SD_D_CLK = IOMUX_PIN(86, 30),
- MX31_PIN_SD_D_IO = IOMUX_PIN(85, 31),
- MX31_PIN_SD_D_I = IOMUX_PIN(84, 32),
- MX31_PIN_DRDY0 = IOMUX_PIN(0xff, 33),
- MX31_PIN_FPSHIFT = IOMUX_PIN(0xff, 34),
- MX31_PIN_HSYNC = IOMUX_PIN(0xff, 35),
- MX31_PIN_VSYNC0 = IOMUX_PIN(0xff, 36),
- MX31_PIN_LD17 = IOMUX_PIN(0xff, 37),
- MX31_PIN_LD16 = IOMUX_PIN(0xff, 38),
- MX31_PIN_LD15 = IOMUX_PIN(0xff, 39),
- MX31_PIN_LD14 = IOMUX_PIN(0xff, 40),
- MX31_PIN_LD13 = IOMUX_PIN(0xff, 41),
- MX31_PIN_LD12 = IOMUX_PIN(0xff, 42),
- MX31_PIN_LD11 = IOMUX_PIN(0xff, 43),
- MX31_PIN_LD10 = IOMUX_PIN(0xff, 44),
- MX31_PIN_LD9 = IOMUX_PIN(0xff, 45),
- MX31_PIN_LD8 = IOMUX_PIN(0xff, 46),
- MX31_PIN_LD7 = IOMUX_PIN(0xff, 47),
- MX31_PIN_LD6 = IOMUX_PIN(0xff, 48),
- MX31_PIN_LD5 = IOMUX_PIN(0xff, 49),
- MX31_PIN_LD4 = IOMUX_PIN(0xff, 50),
- MX31_PIN_LD3 = IOMUX_PIN(0xff, 51),
- MX31_PIN_LD2 = IOMUX_PIN(0xff, 52),
- MX31_PIN_LD1 = IOMUX_PIN(0xff, 53),
- MX31_PIN_LD0 = IOMUX_PIN(0xff, 54),
- MX31_PIN_USBH2_DATA1 = IOMUX_PIN(0xff, 55),
- MX31_PIN_USBH2_DATA0 = IOMUX_PIN(0xff, 56),
- MX31_PIN_USBH2_NXT = IOMUX_PIN(0xff, 57),
- MX31_PIN_USBH2_STP = IOMUX_PIN(0xff, 58),
- MX31_PIN_USBH2_DIR = IOMUX_PIN(0xff, 59),
- MX31_PIN_USBH2_CLK = IOMUX_PIN(0xff, 60),
- MX31_PIN_USBOTG_DATA7 = IOMUX_PIN(0xff, 61),
- MX31_PIN_USBOTG_DATA6 = IOMUX_PIN(0xff, 62),
- MX31_PIN_USBOTG_DATA5 = IOMUX_PIN(0xff, 63),
- MX31_PIN_USBOTG_DATA4 = IOMUX_PIN(0xff, 64),
- MX31_PIN_USBOTG_DATA3 = IOMUX_PIN(0xff, 65),
- MX31_PIN_USBOTG_DATA2 = IOMUX_PIN(0xff, 66),
- MX31_PIN_USBOTG_DATA1 = IOMUX_PIN(0xff, 67),
- MX31_PIN_USBOTG_DATA0 = IOMUX_PIN(0xff, 68),
- MX31_PIN_USBOTG_NXT = IOMUX_PIN(0xff, 69),
- MX31_PIN_USBOTG_STP = IOMUX_PIN(0xff, 70),
- MX31_PIN_USBOTG_DIR = IOMUX_PIN(0xff, 71),
- MX31_PIN_USBOTG_CLK = IOMUX_PIN(0xff, 72),
- MX31_PIN_USB_BYP = IOMUX_PIN(31, 73),
- MX31_PIN_USB_OC = IOMUX_PIN(30, 74),
- MX31_PIN_USB_PWR = IOMUX_PIN(29, 75),
- MX31_PIN_SJC_MOD = IOMUX_PIN(0xff, 76),
- MX31_PIN_DE_B = IOMUX_PIN(0xff, 77),
- MX31_PIN_TRSTB = IOMUX_PIN(0xff, 78),
- MX31_PIN_TDO = IOMUX_PIN(0xff, 79),
- MX31_PIN_TDI = IOMUX_PIN(0xff, 80),
- MX31_PIN_TMS = IOMUX_PIN(0xff, 81),
- MX31_PIN_TCK = IOMUX_PIN(0xff, 82),
- MX31_PIN_RTCK = IOMUX_PIN(0xff, 83),
- MX31_PIN_KEY_COL7 = IOMUX_PIN(57, 84),
- MX31_PIN_KEY_COL6 = IOMUX_PIN(56, 85),
- MX31_PIN_KEY_COL5 = IOMUX_PIN(55, 86),
- MX31_PIN_KEY_COL4 = IOMUX_PIN(54, 87),
- MX31_PIN_KEY_COL3 = IOMUX_PIN(0xff, 88),
- MX31_PIN_KEY_COL2 = IOMUX_PIN(0xff, 89),
- MX31_PIN_KEY_COL1 = IOMUX_PIN(0xff, 90),
- MX31_PIN_KEY_COL0 = IOMUX_PIN(0xff, 91),
- MX31_PIN_KEY_ROW7 = IOMUX_PIN(53, 92),
- MX31_PIN_KEY_ROW6 = IOMUX_PIN(52, 93),
- MX31_PIN_KEY_ROW5 = IOMUX_PIN(51, 94),
- MX31_PIN_KEY_ROW4 = IOMUX_PIN(50, 95),
- MX31_PIN_KEY_ROW3 = IOMUX_PIN(0xff, 96),
- MX31_PIN_KEY_ROW2 = IOMUX_PIN(0xff, 97),
- MX31_PIN_KEY_ROW1 = IOMUX_PIN(0xff, 98),
- MX31_PIN_KEY_ROW0 = IOMUX_PIN(0xff, 99),
- MX31_PIN_BATT_LINE = IOMUX_PIN(49, 100),
- MX31_PIN_CTS2 = IOMUX_PIN(0xff, 101),
- MX31_PIN_RTS2 = IOMUX_PIN(0xff, 102),
- MX31_PIN_TXD2 = IOMUX_PIN(28, 103),
- MX31_PIN_RXD2 = IOMUX_PIN(27, 104),
- MX31_PIN_DTR_DCE2 = IOMUX_PIN(48, 105),
- MX31_PIN_DCD_DTE1 = IOMUX_PIN(47, 106),
- MX31_PIN_RI_DTE1 = IOMUX_PIN(46, 107),
- MX31_PIN_DSR_DTE1 = IOMUX_PIN(45, 108),
- MX31_PIN_DTR_DTE1 = IOMUX_PIN(44, 109),
- MX31_PIN_DCD_DCE1 = IOMUX_PIN(43, 110),
- MX31_PIN_RI_DCE1 = IOMUX_PIN(42, 111),
- MX31_PIN_DSR_DCE1 = IOMUX_PIN(41, 112),
- MX31_PIN_DTR_DCE1 = IOMUX_PIN(40, 113),
- MX31_PIN_CTS1 = IOMUX_PIN(39, 114),
- MX31_PIN_RTS1 = IOMUX_PIN(38, 115),
- MX31_PIN_TXD1 = IOMUX_PIN(37, 116),
- MX31_PIN_RXD1 = IOMUX_PIN(36, 117),
- MX31_PIN_CSPI2_SPI_RDY = IOMUX_PIN(0xff, 118),
- MX31_PIN_CSPI2_SCLK = IOMUX_PIN(0xff, 119),
- MX31_PIN_CSPI2_SS2 = IOMUX_PIN(0xff, 120),
- MX31_PIN_CSPI2_SS1 = IOMUX_PIN(0xff, 121),
- MX31_PIN_CSPI2_SS0 = IOMUX_PIN(0xff, 122),
- MX31_PIN_CSPI2_MISO = IOMUX_PIN(0xff, 123),
- MX31_PIN_CSPI2_MOSI = IOMUX_PIN(0xff, 124),
- MX31_PIN_CSPI1_SPI_RDY = IOMUX_PIN(0xff, 125),
- MX31_PIN_CSPI1_SCLK = IOMUX_PIN(0xff, 126),
- MX31_PIN_CSPI1_SS2 = IOMUX_PIN(0xff, 127),
- MX31_PIN_CSPI1_SS1 = IOMUX_PIN(0xff, 128),
- MX31_PIN_CSPI1_SS0 = IOMUX_PIN(0xff, 129),
- MX31_PIN_CSPI1_MISO = IOMUX_PIN(0xff, 130),
- MX31_PIN_CSPI1_MOSI = IOMUX_PIN(0xff, 131),
- MX31_PIN_SFS6 = IOMUX_PIN(26, 132),
- MX31_PIN_SCK6 = IOMUX_PIN(25, 133),
- MX31_PIN_SRXD6 = IOMUX_PIN(24, 134),
- MX31_PIN_STXD6 = IOMUX_PIN(23, 135),
- MX31_PIN_SFS5 = IOMUX_PIN(0xff, 136),
- MX31_PIN_SCK5 = IOMUX_PIN(0xff, 137),
- MX31_PIN_SRXD5 = IOMUX_PIN(22, 138),
- MX31_PIN_STXD5 = IOMUX_PIN(21, 139),
- MX31_PIN_SFS4 = IOMUX_PIN(0xff, 140),
- MX31_PIN_SCK4 = IOMUX_PIN(0xff, 141),
- MX31_PIN_SRXD4 = IOMUX_PIN(20, 142),
- MX31_PIN_STXD4 = IOMUX_PIN(19, 143),
- MX31_PIN_SFS3 = IOMUX_PIN(0xff, 144),
- MX31_PIN_SCK3 = IOMUX_PIN(0xff, 145),
- MX31_PIN_SRXD3 = IOMUX_PIN(18, 146),
- MX31_PIN_STXD3 = IOMUX_PIN(17, 147),
- MX31_PIN_I2C_DAT = IOMUX_PIN(0xff, 148),
- MX31_PIN_I2C_CLK = IOMUX_PIN(0xff, 149),
- MX31_PIN_CSI_PIXCLK = IOMUX_PIN(83, 150),
- MX31_PIN_CSI_HSYNC = IOMUX_PIN(82, 151),
- MX31_PIN_CSI_VSYNC = IOMUX_PIN(81, 152),
- MX31_PIN_CSI_MCLK = IOMUX_PIN(80, 153),
- MX31_PIN_CSI_D15 = IOMUX_PIN(79, 154),
- MX31_PIN_CSI_D14 = IOMUX_PIN(78, 155),
- MX31_PIN_CSI_D13 = IOMUX_PIN(77, 156),
- MX31_PIN_CSI_D12 = IOMUX_PIN(76, 157),
- MX31_PIN_CSI_D11 = IOMUX_PIN(75, 158),
- MX31_PIN_CSI_D10 = IOMUX_PIN(74, 159),
- MX31_PIN_CSI_D9 = IOMUX_PIN(73, 160),
- MX31_PIN_CSI_D8 = IOMUX_PIN(72, 161),
- MX31_PIN_CSI_D7 = IOMUX_PIN(71, 162),
- MX31_PIN_CSI_D6 = IOMUX_PIN(70, 163),
- MX31_PIN_CSI_D5 = IOMUX_PIN(69, 164),
- MX31_PIN_CSI_D4 = IOMUX_PIN(68, 165),
- MX31_PIN_M_GRANT = IOMUX_PIN(0xff, 166),
- MX31_PIN_M_REQUEST = IOMUX_PIN(0xff, 167),
- MX31_PIN_PC_POE = IOMUX_PIN(0xff, 168),
- MX31_PIN_PC_RW_B = IOMUX_PIN(0xff, 169),
- MX31_PIN_IOIS16 = IOMUX_PIN(0xff, 170),
- MX31_PIN_PC_RST = IOMUX_PIN(0xff, 171),
- MX31_PIN_PC_BVD2 = IOMUX_PIN(0xff, 172),
- MX31_PIN_PC_BVD1 = IOMUX_PIN(0xff, 173),
- MX31_PIN_PC_VS2 = IOMUX_PIN(0xff, 174),
- MX31_PIN_PC_VS1 = IOMUX_PIN(0xff, 175),
- MX31_PIN_PC_PWRON = IOMUX_PIN(0xff, 176),
- MX31_PIN_PC_READY = IOMUX_PIN(0xff, 177),
- MX31_PIN_PC_WAIT_B = IOMUX_PIN(0xff, 178),
- MX31_PIN_PC_CD2_B = IOMUX_PIN(0xff, 179),
- MX31_PIN_PC_CD1_B = IOMUX_PIN(0xff, 180),
- MX31_PIN_D0 = IOMUX_PIN(0xff, 181),
- MX31_PIN_D1 = IOMUX_PIN(0xff, 182),
- MX31_PIN_D2 = IOMUX_PIN(0xff, 183),
- MX31_PIN_D3 = IOMUX_PIN(0xff, 184),
- MX31_PIN_D4 = IOMUX_PIN(0xff, 185),
- MX31_PIN_D5 = IOMUX_PIN(0xff, 186),
- MX31_PIN_D6 = IOMUX_PIN(0xff, 187),
- MX31_PIN_D7 = IOMUX_PIN(0xff, 188),
- MX31_PIN_D8 = IOMUX_PIN(0xff, 189),
- MX31_PIN_D9 = IOMUX_PIN(0xff, 190),
- MX31_PIN_D10 = IOMUX_PIN(0xff, 191),
- MX31_PIN_D11 = IOMUX_PIN(0xff, 192),
- MX31_PIN_D12 = IOMUX_PIN(0xff, 193),
- MX31_PIN_D13 = IOMUX_PIN(0xff, 194),
- MX31_PIN_D14 = IOMUX_PIN(0xff, 195),
- MX31_PIN_D15 = IOMUX_PIN(0xff, 196),
- MX31_PIN_NFRB = IOMUX_PIN(16, 197),
- MX31_PIN_NFCE_B = IOMUX_PIN(15, 198),
- MX31_PIN_NFWP_B = IOMUX_PIN(14, 199),
- MX31_PIN_NFCLE = IOMUX_PIN(13, 200),
- MX31_PIN_NFALE = IOMUX_PIN(12, 201),
- MX31_PIN_NFRE_B = IOMUX_PIN(11, 202),
- MX31_PIN_NFWE_B = IOMUX_PIN(10, 203),
- MX31_PIN_SDQS3 = IOMUX_PIN(0xff, 204),
- MX31_PIN_SDQS2 = IOMUX_PIN(0xff, 205),
- MX31_PIN_SDQS1 = IOMUX_PIN(0xff, 206),
- MX31_PIN_SDQS0 = IOMUX_PIN(0xff, 207),
- MX31_PIN_SDCLK_B = IOMUX_PIN(0xff, 208),
- MX31_PIN_SDCLK = IOMUX_PIN(0xff, 209),
- MX31_PIN_SDCKE1 = IOMUX_PIN(0xff, 210),
- MX31_PIN_SDCKE0 = IOMUX_PIN(0xff, 211),
- MX31_PIN_SDWE = IOMUX_PIN(0xff, 212),
- MX31_PIN_CAS = IOMUX_PIN(0xff, 213),
- MX31_PIN_RAS = IOMUX_PIN(0xff, 214),
- MX31_PIN_RW = IOMUX_PIN(0xff, 215),
- MX31_PIN_BCLK = IOMUX_PIN(0xff, 216),
- MX31_PIN_LBA = IOMUX_PIN(0xff, 217),
- MX31_PIN_ECB = IOMUX_PIN(0xff, 218),
- MX31_PIN_CS5 = IOMUX_PIN(0xff, 219),
- MX31_PIN_CS4 = IOMUX_PIN(0xff, 220),
- MX31_PIN_CS3 = IOMUX_PIN(0xff, 221),
- MX31_PIN_CS2 = IOMUX_PIN(0xff, 222),
- MX31_PIN_CS1 = IOMUX_PIN(0xff, 223),
- MX31_PIN_CS0 = IOMUX_PIN(0xff, 224),
- MX31_PIN_OE = IOMUX_PIN(0xff, 225),
- MX31_PIN_EB1 = IOMUX_PIN(0xff, 226),
- MX31_PIN_EB0 = IOMUX_PIN(0xff, 227),
- MX31_PIN_DQM3 = IOMUX_PIN(0xff, 228),
- MX31_PIN_DQM2 = IOMUX_PIN(0xff, 229),
- MX31_PIN_DQM1 = IOMUX_PIN(0xff, 230),
- MX31_PIN_DQM0 = IOMUX_PIN(0xff, 231),
- MX31_PIN_SD31 = IOMUX_PIN(0xff, 232),
- MX31_PIN_SD30 = IOMUX_PIN(0xff, 233),
- MX31_PIN_SD29 = IOMUX_PIN(0xff, 234),
- MX31_PIN_SD28 = IOMUX_PIN(0xff, 235),
- MX31_PIN_SD27 = IOMUX_PIN(0xff, 236),
- MX31_PIN_SD26 = IOMUX_PIN(0xff, 237),
- MX31_PIN_SD25 = IOMUX_PIN(0xff, 238),
- MX31_PIN_SD24 = IOMUX_PIN(0xff, 239),
- MX31_PIN_SD23 = IOMUX_PIN(0xff, 240),
- MX31_PIN_SD22 = IOMUX_PIN(0xff, 241),
- MX31_PIN_SD21 = IOMUX_PIN(0xff, 242),
- MX31_PIN_SD20 = IOMUX_PIN(0xff, 243),
- MX31_PIN_SD19 = IOMUX_PIN(0xff, 244),
- MX31_PIN_SD18 = IOMUX_PIN(0xff, 245),
- MX31_PIN_SD17 = IOMUX_PIN(0xff, 246),
- MX31_PIN_SD16 = IOMUX_PIN(0xff, 247),
- MX31_PIN_SD15 = IOMUX_PIN(0xff, 248),
- MX31_PIN_SD14 = IOMUX_PIN(0xff, 249),
- MX31_PIN_SD13 = IOMUX_PIN(0xff, 250),
- MX31_PIN_SD12 = IOMUX_PIN(0xff, 251),
- MX31_PIN_SD11 = IOMUX_PIN(0xff, 252),
- MX31_PIN_SD10 = IOMUX_PIN(0xff, 253),
- MX31_PIN_SD9 = IOMUX_PIN(0xff, 254),
- MX31_PIN_SD8 = IOMUX_PIN(0xff, 255),
- MX31_PIN_SD7 = IOMUX_PIN(0xff, 256),
- MX31_PIN_SD6 = IOMUX_PIN(0xff, 257),
- MX31_PIN_SD5 = IOMUX_PIN(0xff, 258),
- MX31_PIN_SD4 = IOMUX_PIN(0xff, 259),
- MX31_PIN_SD3 = IOMUX_PIN(0xff, 260),
- MX31_PIN_SD2 = IOMUX_PIN(0xff, 261),
- MX31_PIN_SD1 = IOMUX_PIN(0xff, 262),
- MX31_PIN_SD0 = IOMUX_PIN(0xff, 263),
- MX31_PIN_SDBA0 = IOMUX_PIN(0xff, 264),
- MX31_PIN_SDBA1 = IOMUX_PIN(0xff, 265),
- MX31_PIN_A25 = IOMUX_PIN(0xff, 266),
- MX31_PIN_A24 = IOMUX_PIN(0xff, 267),
- MX31_PIN_A23 = IOMUX_PIN(0xff, 268),
- MX31_PIN_A22 = IOMUX_PIN(0xff, 269),
- MX31_PIN_A21 = IOMUX_PIN(0xff, 270),
- MX31_PIN_A20 = IOMUX_PIN(0xff, 271),
- MX31_PIN_A19 = IOMUX_PIN(0xff, 272),
- MX31_PIN_A18 = IOMUX_PIN(0xff, 273),
- MX31_PIN_A17 = IOMUX_PIN(0xff, 274),
- MX31_PIN_A16 = IOMUX_PIN(0xff, 275),
- MX31_PIN_A14 = IOMUX_PIN(0xff, 276),
- MX31_PIN_A15 = IOMUX_PIN(0xff, 277),
- MX31_PIN_A13 = IOMUX_PIN(0xff, 278),
- MX31_PIN_A12 = IOMUX_PIN(0xff, 279),
- MX31_PIN_A11 = IOMUX_PIN(0xff, 280),
- MX31_PIN_MA10 = IOMUX_PIN(0xff, 281),
- MX31_PIN_A10 = IOMUX_PIN(0xff, 282),
- MX31_PIN_A9 = IOMUX_PIN(0xff, 283),
- MX31_PIN_A8 = IOMUX_PIN(0xff, 284),
- MX31_PIN_A7 = IOMUX_PIN(0xff, 285),
- MX31_PIN_A6 = IOMUX_PIN(0xff, 286),
- MX31_PIN_A5 = IOMUX_PIN(0xff, 287),
- MX31_PIN_A4 = IOMUX_PIN(0xff, 288),
- MX31_PIN_A3 = IOMUX_PIN(0xff, 289),
- MX31_PIN_A2 = IOMUX_PIN(0xff, 290),
- MX31_PIN_A1 = IOMUX_PIN(0xff, 291),
- MX31_PIN_A0 = IOMUX_PIN(0xff, 292),
- MX31_PIN_VPG1 = IOMUX_PIN(0xff, 293),
- MX31_PIN_VPG0 = IOMUX_PIN(0xff, 294),
- MX31_PIN_DVFS1 = IOMUX_PIN(0xff, 295),
- MX31_PIN_DVFS0 = IOMUX_PIN(0xff, 296),
- MX31_PIN_VSTBY = IOMUX_PIN(0xff, 297),
- MX31_PIN_POWER_FAIL = IOMUX_PIN(0xff, 298),
- MX31_PIN_CKIL = IOMUX_PIN(0xff, 299),
- MX31_PIN_BOOT_MODE4 = IOMUX_PIN(0xff, 300),
- MX31_PIN_BOOT_MODE3 = IOMUX_PIN(0xff, 301),
- MX31_PIN_BOOT_MODE2 = IOMUX_PIN(0xff, 302),
- MX31_PIN_BOOT_MODE1 = IOMUX_PIN(0xff, 303),
- MX31_PIN_BOOT_MODE0 = IOMUX_PIN(0xff, 304),
- MX31_PIN_CLKO = IOMUX_PIN(0xff, 305),
- MX31_PIN_POR_B = IOMUX_PIN(0xff, 306),
- MX31_PIN_RESET_IN_B = IOMUX_PIN(0xff, 307),
- MX31_PIN_CKIH = IOMUX_PIN(0xff, 308),
- MX31_PIN_SIMPD0 = IOMUX_PIN(35, 309),
- MX31_PIN_SRX0 = IOMUX_PIN(34, 310),
- MX31_PIN_STX0 = IOMUX_PIN(33, 311),
- MX31_PIN_SVEN0 = IOMUX_PIN(32, 312),
- MX31_PIN_SRST0 = IOMUX_PIN(67, 313),
- MX31_PIN_SCLK0 = IOMUX_PIN(66, 314),
- MX31_PIN_GPIO3_1 = IOMUX_PIN(65, 315),
- MX31_PIN_GPIO3_0 = IOMUX_PIN(64, 316),
- MX31_PIN_GPIO1_6 = IOMUX_PIN( 6, 317),
- MX31_PIN_GPIO1_5 = IOMUX_PIN( 5, 318),
- MX31_PIN_GPIO1_4 = IOMUX_PIN( 4, 319),
- MX31_PIN_GPIO1_3 = IOMUX_PIN( 3, 320),
- MX31_PIN_GPIO1_2 = IOMUX_PIN( 2, 321),
- MX31_PIN_GPIO1_1 = IOMUX_PIN( 1, 322),
- MX31_PIN_GPIO1_0 = IOMUX_PIN( 0, 323),
- MX31_PIN_PWMO = IOMUX_PIN( 9, 324),
- MX31_PIN_WATCHDOG_RST = IOMUX_PIN(0xff, 325),
- MX31_PIN_COMPARE = IOMUX_PIN( 8, 326),
- MX31_PIN_CAPTURE = IOMUX_PIN( 7, 327),
-};
-
-#define PIN_MAX 327
-#define NB_PORTS 12 /* NB_PINS/32, we chose 32 pins per "PORT" */
-
-/*
- * Convenience values for use with mxc_iomux_mode()
- *
- * Format here is MX31_PIN_(pin name)__(function)
- */
-#define MX31_PIN_CSPI3_MOSI__RXD3 IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI3_MISO__TXD3 IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI3_SCLK__RTS3 IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI3_SPI_RDY__CTS3 IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_RTS1__SFS IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_TXD1__SCK IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_RXD1__RXD1 IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_RXD1__STXDA IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_DCD_DCE1__DCD_DCE1 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_RI_DCE1__RI_DCE1 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DSR_DCE1__DSR_DCE1 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DTR_DCE1__DTR_DCE1 IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DTR_DCE1__SRXDA IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_CTS2__CTS2 IOMUX_MODE(MX31_PIN_CTS2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_RTS2__RTS2 IOMUX_MODE(MX31_PIN_RTS2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_TXD2__TXD2 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_RXD2__RXD2 IOMUX_MODE(MX31_PIN_RXD2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DCD_DTE1__DCD_DTE2 IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_RI_DTE1__RI_DTE2 IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_DSR_DTE1__DSR_DTE2 IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_DTR_DTE1__DTR_DTE2 IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_OCONFIG_ALT3 | IOMUX_ICONFIG_NONE)
-#define MX31_PIN_PC_RST__CTS5 IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_PC_VS2__RTS5 IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_PC_BVD2__TXD5 IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_PC_BVD1__RXD5 IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_CSPI1_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_SS0__SS0 IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_SS1__SS1 IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_SS2__SS2 IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_MOSI__SCL IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI2_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_MISO__SDA IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI2_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI2_SPI_RDY, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_SS0__SS0 IOMUX_MODE(MX31_PIN_CSPI2_SS0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_SS1__SS1 IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_SS2__SS2 IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI3_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI3_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI3_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI3_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_BATT_LINE__OWIRE IOMUX_MODE(MX31_PIN_BATT_LINE, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CS4__CS4 IOMUX_MODE(MX31_PIN_CS4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SD1_DATA3__SD1_DATA3 IOMUX_MODE(MX31_PIN_SD1_DATA3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SD1_DATA2__SD1_DATA2 IOMUX_MODE(MX31_PIN_SD1_DATA2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SD1_DATA1__SD1_DATA1 IOMUX_MODE(MX31_PIN_SD1_DATA1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SD1_DATA0__SD1_DATA0 IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SD1_CLK__SD1_CLK IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SD1_CMD__SD1_CMD IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_LD0__LD0 IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD1__LD1 IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD2__LD2 IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD3__LD3 IOMUX_MODE(MX31_PIN_LD3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD4__LD4 IOMUX_MODE(MX31_PIN_LD4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD5__LD5 IOMUX_MODE(MX31_PIN_LD5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD6__LD6 IOMUX_MODE(MX31_PIN_LD6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD7__LD7 IOMUX_MODE(MX31_PIN_LD7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD8__LD8 IOMUX_MODE(MX31_PIN_LD8, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD9__LD9 IOMUX_MODE(MX31_PIN_LD9, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD10__LD10 IOMUX_MODE(MX31_PIN_LD10, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD11__LD11 IOMUX_MODE(MX31_PIN_LD11, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD12__LD12 IOMUX_MODE(MX31_PIN_LD12, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD13__LD13 IOMUX_MODE(MX31_PIN_LD13, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD14__LD14 IOMUX_MODE(MX31_PIN_LD14, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD15__LD15 IOMUX_MODE(MX31_PIN_LD15, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD16__LD16 IOMUX_MODE(MX31_PIN_LD16, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD17__LD17 IOMUX_MODE(MX31_PIN_LD17, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_VSYNC3__VSYNC3 IOMUX_MODE(MX31_PIN_VSYNC3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_HSYNC__HSYNC IOMUX_MODE(MX31_PIN_HSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_FPSHIFT__FPSHIFT IOMUX_MODE(MX31_PIN_FPSHIFT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DRDY0__DRDY0 IOMUX_MODE(MX31_PIN_DRDY0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_D3_REV__D3_REV IOMUX_MODE(MX31_PIN_D3_REV, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CONTRAST__CONTRAST IOMUX_MODE(MX31_PIN_CONTRAST, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_D3_SPL__D3_SPL IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_D3_CLS__D3_CLS IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_GPIO1_1__GPIO IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_CSPI2_SS2__I2C3_SDA IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI2_SCLK__I2C3_SCL IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_CSI_D4__GPIO3_4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_CSI_D5__GPIO3_5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_MISO__USBH1_RXDP IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS0__USBH1_TXDM IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS1__USBH1_TXDP IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS2__USBH1_RCV IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SCLK__USBH1_OEB IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_SFS6__USBH1_SUSPEND IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_NFRE_B__GPIO1_11 IOMUX_MODE(MX31_PIN_NFRE_B, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_NFALE__GPIO1_12 IOMUX_MODE(MX31_PIN_NFALE, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_USBH2_DATA0__USBH2_DATA0 IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_DATA1__USBH2_DATA1 IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_STXD3__USBH2_DATA2 IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SRXD3__USBH2_DATA3 IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SCK3__USBH2_DATA4 IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SFS3__USBH2_DATA5 IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_STXD6__USBH2_DATA6 IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SRXD6__USBH2_DATA7 IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_CLK__USBH2_CLK IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_DIR__USBH2_DIR IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_NXT__USBH2_NXT IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_STP__USBH2_STP IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SCK6__GPIO1_25 IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_I2C_CLK__I2C1_SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_GPIO1_0__GPIO1_0 IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_SVEN0__GPIO2_0 IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_STX0__GPIO2_1 IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_SRX0__GPIO2_2 IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_SIMPD0__GPIO2_3 IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_DTR_DCE1__GPIO2_8 IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_DSR_DCE1__GPIO2_9 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_RI_DCE1__GPIO2_10 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_DCD_DCE1__GPIO2_11 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_STXD5__GPIO1_21 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_SRXD5__GPIO1_22 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_GPIO1_3__GPIO1_3 IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_CSPI2_SS1__CSPI3_SS1 IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_RTS1__GPIO2_6 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_CTS1__GPIO2_7 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_LCS0__GPIO3_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_STXD4__STXD4 IOMUX_MODE(MX31_PIN_STXD4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SRXD4__SRXD4 IOMUX_MODE(MX31_PIN_SRXD4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SCK4__SCK4 IOMUX_MODE(MX31_PIN_SCK4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SFS4__SFS4 IOMUX_MODE(MX31_PIN_SFS4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_STXD5__STXD5 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SRXD5__SRXD5 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SCK5__SCK5 IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SFS5__SFS5 IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW0_KEY_ROW0 IOMUX_MODE(MX31_PIN_KEY_ROW0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW1_KEY_ROW1 IOMUX_MODE(MX31_PIN_KEY_ROW1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW2_KEY_ROW2 IOMUX_MODE(MX31_PIN_KEY_ROW2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW3_KEY_ROW3 IOMUX_MODE(MX31_PIN_KEY_ROW3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW4_KEY_ROW4 IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW4_GPIO IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_KEY_ROW5_KEY_ROW5 IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW6_KEY_ROW6 IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW7_KEY_ROW7 IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL0_KEY_COL0 IOMUX_MODE(MX31_PIN_KEY_COL0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL1_KEY_COL1 IOMUX_MODE(MX31_PIN_KEY_COL1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL2_KEY_COL2 IOMUX_MODE(MX31_PIN_KEY_COL2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL3_KEY_COL3 IOMUX_MODE(MX31_PIN_KEY_COL3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL4_KEY_COL4 IOMUX_MODE(MX31_PIN_KEY_COL4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL5_KEY_COL5 IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL6_KEY_COL6 IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL7_KEY_COL7 IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_WATCHDOG_RST__WATCHDOG_RST IOMUX_MODE(MX31_PIN_WATCHDOG_RST, IOMUX_CONFIG_FUNC)
-
-
-/*
- * XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed with cspi2_ss0,
- * cspi2_ss1, cspi1_ss0 cspi1_ss1
- */
-
-/*
- * This function configures the pad value for a IOMUX pin.
- */
-void mxc_iomux_set_pad(enum iomux_pins, u32);
-
-#endif /* ifndef __MACH_IOMUX_MX3_H__ */
diff --git a/arch/arm/mach-imx/iomux-mx35.h b/arch/arm/mach-imx/iomux-mx35.h
deleted file mode 100644
index 7fb5259..0000000
--- a/arch/arm/mach-imx/iomux-mx35.h
+++ /dev/null
@@ -1,1254 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
- */
-
-#ifndef __MACH_IOMUX_MX35_H__
-#define __MACH_IOMUX_MX35_H__
-
-#include "iomux-v3.h"
-
-/*
- * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named
- * GPIO_<unit>_<num> see also iomux-v3.h
- */
-
-/* PAD MUX ALT INPSE PATH */
-#define MX35_PAD_CAPTURE__GPT_CAPIN1 IOMUX_PAD(0x328, 0x004, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CAPTURE__GPT_CMPOUT2 IOMUX_PAD(0x328, 0x004, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CAPTURE__CSPI2_SS1 IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL)
-#define MX35_PAD_CAPTURE__EPIT1_EPITO IOMUX_PAD(0x328, 0x004, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CAPTURE__CCM_CLK32K IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CAPTURE__GPIO1_4 IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_COMPARE__GPT_CMPOUT1 IOMUX_PAD(0x32c, 0x008, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_COMPARE__GPT_CAPIN2 IOMUX_PAD(0x32c, 0x008, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_COMPARE__GPT_CMPOUT3 IOMUX_PAD(0x32c, 0x008, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_COMPARE__EPIT2_EPITO IOMUX_PAD(0x32c, 0x008, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_COMPARE__GPIO1_5 IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL)
-#define MX35_PAD_COMPARE__SDMA_EXTDMA_2 IOMUX_PAD(0x32c, 0x008, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_WDOG_RST__WDOG_WDOG_B IOMUX_PAD(0x330, 0x00c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE IOMUX_PAD(0x330, 0x00c, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_WDOG_RST__GPIO1_6 IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_0__OWIRE_LINE IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0 IOMUX_PAD(0x334, 0x010, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_1__PWM_PWMO IOMUX_PAD(0x338, 0x014, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_1__CSPI1_SS2 IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT IOMUX_PAD(0x338, 0x014, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1 IOMUX_PAD(0x338, 0x014, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_GPIO2_0__GPIO2_0 IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK IOMUX_PAD(0x33c, 0x018, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_GPIO3_0__GPIO3_0 IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK IOMUX_PAD(0x340, 0x01c, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B IOMUX_PAD(0x344, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_POR_B__CCM_POR_B IOMUX_PAD(0x348, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CLKO__CCM_CLKO IOMUX_PAD(0x34c, 0x020, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CLKO__GPIO1_8 IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0 IOMUX_PAD(0x350, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1 IOMUX_PAD(0x354, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0 IOMUX_PAD(0x358, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1 IOMUX_PAD(0x35c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26 IOMUX_PAD(0x360, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_VSTBY__CCM_VSTBY IOMUX_PAD(0x364, 0x024, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_VSTBY__GPIO1_7 IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A0__EMI_EIM_DA_L_0 IOMUX_PAD(0x368, 0x028, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A1__EMI_EIM_DA_L_1 IOMUX_PAD(0x36c, 0x02c, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A2__EMI_EIM_DA_L_2 IOMUX_PAD(0x370, 0x030, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A3__EMI_EIM_DA_L_3 IOMUX_PAD(0x374, 0x034, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A4__EMI_EIM_DA_L_4 IOMUX_PAD(0x378, 0x038, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A5__EMI_EIM_DA_L_5 IOMUX_PAD(0x37c, 0x03c, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A6__EMI_EIM_DA_L_6 IOMUX_PAD(0x380, 0x040, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A7__EMI_EIM_DA_L_7 IOMUX_PAD(0x384, 0x044, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A8__EMI_EIM_DA_H_8 IOMUX_PAD(0x388, 0x048, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A9__EMI_EIM_DA_H_9 IOMUX_PAD(0x38c, 0x04c, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A10__EMI_EIM_DA_H_10 IOMUX_PAD(0x390, 0x050, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_MA10__EMI_MA10 IOMUX_PAD(0x394, 0x054, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A11__EMI_EIM_DA_H_11 IOMUX_PAD(0x398, 0x058, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A12__EMI_EIM_DA_H_12 IOMUX_PAD(0x39c, 0x05c, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A13__EMI_EIM_DA_H_13 IOMUX_PAD(0x3a0, 0x060, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A14__EMI_EIM_DA_H2_14 IOMUX_PAD(0x3a4, 0x064, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A15__EMI_EIM_DA_H2_15 IOMUX_PAD(0x3a8, 0x068, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A16__EMI_EIM_A_16 IOMUX_PAD(0x3ac, 0x06c, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A17__EMI_EIM_A_17 IOMUX_PAD(0x3b0, 0x070, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A18__EMI_EIM_A_18 IOMUX_PAD(0x3b4, 0x074, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A19__EMI_EIM_A_19 IOMUX_PAD(0x3b8, 0x078, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A20__EMI_EIM_A_20 IOMUX_PAD(0x3bc, 0x07c, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A21__EMI_EIM_A_21 IOMUX_PAD(0x3c0, 0x080, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A22__EMI_EIM_A_22 IOMUX_PAD(0x3c4, 0x084, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A23__EMI_EIM_A_23 IOMUX_PAD(0x3c8, 0x088, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A24__EMI_EIM_A_24 IOMUX_PAD(0x3cc, 0x08c, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A25__EMI_EIM_A_25 IOMUX_PAD(0x3d0, 0x090, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDBA1__EMI_EIM_SDBA1 IOMUX_PAD(0x3d4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDBA0__EMI_EIM_SDBA0 IOMUX_PAD(0x3d8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD0__EMI_DRAM_D_0 IOMUX_PAD(0x3dc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1__EMI_DRAM_D_1 IOMUX_PAD(0x3e0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2__EMI_DRAM_D_2 IOMUX_PAD(0x3e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD3__EMI_DRAM_D_3 IOMUX_PAD(0x3e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD4__EMI_DRAM_D_4 IOMUX_PAD(0x3ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD5__EMI_DRAM_D_5 IOMUX_PAD(0x3f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD6__EMI_DRAM_D_6 IOMUX_PAD(0x3f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD7__EMI_DRAM_D_7 IOMUX_PAD(0x3f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD8__EMI_DRAM_D_8 IOMUX_PAD(0x3fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD9__EMI_DRAM_D_9 IOMUX_PAD(0x400, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD10__EMI_DRAM_D_10 IOMUX_PAD(0x404, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD11__EMI_DRAM_D_11 IOMUX_PAD(0x408, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD12__EMI_DRAM_D_12 IOMUX_PAD(0x40c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD13__EMI_DRAM_D_13 IOMUX_PAD(0x410, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD14__EMI_DRAM_D_14 IOMUX_PAD(0x414, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD15__EMI_DRAM_D_15 IOMUX_PAD(0x418, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD16__EMI_DRAM_D_16 IOMUX_PAD(0x41c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD17__EMI_DRAM_D_17 IOMUX_PAD(0x420, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD18__EMI_DRAM_D_18 IOMUX_PAD(0x424, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD19__EMI_DRAM_D_19 IOMUX_PAD(0x428, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD20__EMI_DRAM_D_20 IOMUX_PAD(0x42c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD21__EMI_DRAM_D_21 IOMUX_PAD(0x430, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD22__EMI_DRAM_D_22 IOMUX_PAD(0x434, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD23__EMI_DRAM_D_23 IOMUX_PAD(0x438, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD24__EMI_DRAM_D_24 IOMUX_PAD(0x43c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD25__EMI_DRAM_D_25 IOMUX_PAD(0x440, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD26__EMI_DRAM_D_26 IOMUX_PAD(0x444, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD27__EMI_DRAM_D_27 IOMUX_PAD(0x448, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD28__EMI_DRAM_D_28 IOMUX_PAD(0x44c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD29__EMI_DRAM_D_29 IOMUX_PAD(0x450, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD30__EMI_DRAM_D_30 IOMUX_PAD(0x454, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD31__EMI_DRAM_D_31 IOMUX_PAD(0x458, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_DQM0__EMI_DRAM_DQM_0 IOMUX_PAD(0x45c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_DQM1__EMI_DRAM_DQM_1 IOMUX_PAD(0x460, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_DQM2__EMI_DRAM_DQM_2 IOMUX_PAD(0x464, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_DQM3__EMI_DRAM_DQM_3 IOMUX_PAD(0x468, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_EB0__EMI_EIM_EB0_B IOMUX_PAD(0x46c, 0x094, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_EB1__EMI_EIM_EB1_B IOMUX_PAD(0x470, 0x098, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_OE__EMI_EIM_OE IOMUX_PAD(0x474, 0x09c, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CS0__EMI_EIM_CS0 IOMUX_PAD(0x478, 0x0a0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CS1__EMI_EIM_CS1 IOMUX_PAD(0x47c, 0x0a4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CS1__EMI_NANDF_CE3 IOMUX_PAD(0x47c, 0x0a4, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CS2__EMI_EIM_CS2 IOMUX_PAD(0x480, 0x0a8, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CS3__EMI_EIM_CS3 IOMUX_PAD(0x484, 0x0ac, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CS4__EMI_EIM_CS4 IOMUX_PAD(0x488, 0x0b0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CS4__EMI_DTACK_B IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL)
-#define MX35_PAD_CS4__EMI_NANDF_CE1 IOMUX_PAD(0x488, 0x0b0, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CS4__GPIO1_20 IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CS5__EMI_EIM_CS5 IOMUX_PAD(0x48c, 0x0b4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CS5__CSPI2_SS2 IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL)
-#define MX35_PAD_CS5__CSPI1_SS2 IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL)
-#define MX35_PAD_CS5__EMI_NANDF_CE2 IOMUX_PAD(0x48c, 0x0b4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CS5__GPIO1_21 IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_NF_CE0__EMI_NANDF_CE0 IOMUX_PAD(0x490, 0x0b8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NF_CE0__GPIO1_22 IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ECB__EMI_EIM_ECB IOMUX_PAD(0x494, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LBA__EMI_EIM_LBA IOMUX_PAD(0x498, 0x0bc, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_BCLK__EMI_EIM_BCLK IOMUX_PAD(0x49c, 0x0c0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_RW__EMI_EIM_RW IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_RAS__EMI_DRAM_RAS IOMUX_PAD(0x4a4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CAS__EMI_DRAM_CAS IOMUX_PAD(0x4a8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDWE__EMI_DRAM_SDWE IOMUX_PAD(0x4ac, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0 IOMUX_PAD(0x4b0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1 IOMUX_PAD(0x4b4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK IOMUX_PAD(0x4b8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0 IOMUX_PAD(0x4bc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1 IOMUX_PAD(0x4c0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2 IOMUX_PAD(0x4c4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3 IOMUX_PAD(0x4c8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWE_B__GPIO2_18 IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0 IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFRE_B__GPIO2_19 IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1 IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_NFALE__EMI_NANDF_ALE IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFALE__USB_TOP_USBH2_STP IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFALE__IPU_DISPB_CS0 IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFALE__GPIO2_20 IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2 IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_NFCLE__EMI_NANDF_CLE IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFCLE__GPIO2_21 IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3 IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWP_B__IPU_DISPB_WR IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWP_B__GPIO2_22 IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_NFRB__EMI_NANDF_RB IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFRB__IPU_DISPB_RD IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFRB__GPIO2_23 IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D15__EMI_EIM_D_15 IOMUX_PAD(0x4e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D14__EMI_EIM_D_14 IOMUX_PAD(0x4e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D13__EMI_EIM_D_13 IOMUX_PAD(0x4ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D12__EMI_EIM_D_12 IOMUX_PAD(0x4f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D11__EMI_EIM_D_11 IOMUX_PAD(0x4f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D10__EMI_EIM_D_10 IOMUX_PAD(0x4f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D9__EMI_EIM_D_9 IOMUX_PAD(0x4fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D8__EMI_EIM_D_8 IOMUX_PAD(0x500, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D7__EMI_EIM_D_7 IOMUX_PAD(0x504, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D6__EMI_EIM_D_6 IOMUX_PAD(0x508, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D5__EMI_EIM_D_5 IOMUX_PAD(0x50c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D4__EMI_EIM_D_4 IOMUX_PAD(0x510, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3__EMI_EIM_D_3 IOMUX_PAD(0x514, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D2__EMI_EIM_D_2 IOMUX_PAD(0x518, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D1__EMI_EIM_D_1 IOMUX_PAD(0x51c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D0__EMI_EIM_D_0 IOMUX_PAD(0x520, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D8__IPU_CSI_D_8 IOMUX_PAD(0x524, 0x0e0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D8__KPP_COL_0 IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D8__GPIO1_20 IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13 IOMUX_PAD(0x524, 0x0e0, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D9__IPU_CSI_D_9 IOMUX_PAD(0x528, 0x0e4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D9__KPP_COL_1 IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D9__GPIO1_21 IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14 IOMUX_PAD(0x528, 0x0e4, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D10__IPU_CSI_D_10 IOMUX_PAD(0x52c, 0x0e8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D10__KPP_COL_2 IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D10__GPIO1_22 IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15 IOMUX_PAD(0x52c, 0x0e8, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D11__IPU_CSI_D_11 IOMUX_PAD(0x530, 0x0ec, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D11__KPP_COL_3 IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D11__GPIO1_23 IOMUX_PAD(0x530, 0x0ec, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D12__IPU_CSI_D_12 IOMUX_PAD(0x534, 0x0f0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D12__KPP_ROW_0 IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D12__GPIO1_24 IOMUX_PAD(0x534, 0x0f0, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D13__IPU_CSI_D_13 IOMUX_PAD(0x538, 0x0f4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D13__KPP_ROW_1 IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D13__GPIO1_25 IOMUX_PAD(0x538, 0x0f4, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D14__IPU_CSI_D_14 IOMUX_PAD(0x53c, 0x0f8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D14__KPP_ROW_2 IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D14__GPIO1_26 IOMUX_PAD(0x53c, 0x0f8, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D15__IPU_CSI_D_15 IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D15__KPP_ROW_3 IOMUX_PAD(0x540, 0x0fc, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D15__GPIO1_27 IOMUX_PAD(0x540, 0x0fc, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK IOMUX_PAD(0x544, 0x100, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_MCLK__GPIO1_28 IOMUX_PAD(0x544, 0x100, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC IOMUX_PAD(0x548, 0x104, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_VSYNC__GPIO1_29 IOMUX_PAD(0x548, 0x104, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC IOMUX_PAD(0x54c, 0x108, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_HSYNC__GPIO1_30 IOMUX_PAD(0x54c, 0x108, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK IOMUX_PAD(0x550, 0x10c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_PIXCLK__GPIO1_31 IOMUX_PAD(0x550, 0x10c, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_I2C1_CLK__I2C1_SCL IOMUX_PAD(0x554, 0x110, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C1_CLK__GPIO2_24 IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK IOMUX_PAD(0x554, 0x110, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_I2C1_DAT__I2C1_SDA IOMUX_PAD(0x558, 0x114, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C1_DAT__GPIO2_25 IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_I2C2_CLK__I2C2_SCL IOMUX_PAD(0x55c, 0x118, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_CLK__CAN1_TXCAN IOMUX_PAD(0x55c, 0x118, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR IOMUX_PAD(0x55c, 0x118, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_CLK__GPIO2_26 IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x55c, 0x118, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_I2C2_DAT__I2C2_SDA IOMUX_PAD(0x560, 0x11c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_DAT__CAN1_RXCAN IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_DAT__GPIO2_27 IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x560, 0x11c, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD IOMUX_PAD(0x564, 0x120, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXD4__GPIO2_28 IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0 IOMUX_PAD(0x564, 0x120, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD IOMUX_PAD(0x568, 0x124, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SRXD4__GPIO2_29 IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL)
-#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1 IOMUX_PAD(0x568, 0x124, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC IOMUX_PAD(0x56c, 0x128, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCK4__GPIO2_30 IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2 IOMUX_PAD(0x56c, 0x128, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS IOMUX_PAD(0x570, 0x12c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXFS4__GPIO2_31 IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3 IOMUX_PAD(0x570, 0x12c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD IOMUX_PAD(0x574, 0x130, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x574, 0x130, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXD5__CSPI2_MOSI IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXD5__GPIO1_0 IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL)
-#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4 IOMUX_PAD(0x574, 0x130, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD IOMUX_PAD(0x578, 0x134, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1 IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL)
-#define MX35_PAD_SRXD5__CSPI2_MISO IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL)
-#define MX35_PAD_SRXD5__GPIO1_1 IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL)
-#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5 IOMUX_PAD(0x578, 0x134, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC IOMUX_PAD(0x57c, 0x138, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCK5__CSPI2_SCLK IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCK5__GPIO1_2 IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6 IOMUX_PAD(0x57c, 0x138, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS IOMUX_PAD(0x580, 0x13c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXFS5__CSPI2_RDY IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXFS5__GPIO1_3 IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7 IOMUX_PAD(0x580, 0x13c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SCKR__ESAI_SCKR IOMUX_PAD(0x584, 0x140, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCKR__GPIO1_4 IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL)
-#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10 IOMUX_PAD(0x584, 0x140, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FSR__ESAI_FSR IOMUX_PAD(0x588, 0x144, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FSR__GPIO1_5 IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL)
-#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11 IOMUX_PAD(0x588, 0x144, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_HCKR__ESAI_HCKR IOMUX_PAD(0x58c, 0x148, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS IOMUX_PAD(0x58c, 0x148, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_HCKR__CSPI2_SS0 IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL)
-#define MX35_PAD_HCKR__IPU_FLASH_STROBE IOMUX_PAD(0x58c, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_HCKR__GPIO1_6 IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL)
-#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12 IOMUX_PAD(0x58c, 0x148, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SCKT__ESAI_SCKT IOMUX_PAD(0x590, 0x14c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCKT__GPIO1_7 IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL)
-#define MX35_PAD_SCKT__IPU_CSI_D_0 IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCKT__KPP_ROW_2 IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_FST__ESAI_FST IOMUX_PAD(0x594, 0x150, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FST__GPIO1_8 IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL)
-#define MX35_PAD_FST__IPU_CSI_D_1 IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL)
-#define MX35_PAD_FST__KPP_ROW_3 IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_HCKT__ESAI_HCKT IOMUX_PAD(0x598, 0x154, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL)
-#define MX35_PAD_HCKT__GPIO1_9 IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL)
-#define MX35_PAD_HCKT__IPU_CSI_D_2 IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL)
-#define MX35_PAD_HCKT__KPP_COL_3 IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0 IOMUX_PAD(0x59c, 0x158, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC IOMUX_PAD(0x59c, 0x158, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX5_RX0__CSPI2_SS2 IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL)
-#define MX35_PAD_TX5_RX0__CAN2_TXCAN IOMUX_PAD(0x59c, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX5_RX0__UART2_DTR IOMUX_PAD(0x59c, 0x158, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX5_RX0__GPIO1_10 IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0 IOMUX_PAD(0x59c, 0x158, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1 IOMUX_PAD(0x5a0, 0x15c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS IOMUX_PAD(0x5a0, 0x15c, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__CSPI2_SS3 IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__CAN2_RXCAN IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__UART2_DSR IOMUX_PAD(0x5a0, 0x15c, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__GPIO1_11 IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__IPU_CSI_D_3 IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__KPP_ROW_0 IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2 IOMUX_PAD(0x5a4, 0x160, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX3_RX2__I2C3_SCL IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1 IOMUX_PAD(0x5a4, 0x160, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX3_RX2__GPIO1_12 IOMUX_PAD(0x5a4, 0x160, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX3_RX2__IPU_CSI_D_4 IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX3_RX2__KPP_ROW_1 IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3 IOMUX_PAD(0x5a8, 0x164, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX2_RX3__I2C3_SDA IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2 IOMUX_PAD(0x5a8, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX2_RX3__GPIO1_13 IOMUX_PAD(0x5a8, 0x164, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX2_RX3__IPU_CSI_D_5 IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX2_RX3__KPP_COL_0 IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_TX1__ESAI_TX1 IOMUX_PAD(0x5ac, 0x168, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX1__CCM_PMIC_RDY IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL)
-#define MX35_PAD_TX1__CSPI1_SS2 IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL)
-#define MX35_PAD_TX1__EMI_NANDF_CE3 IOMUX_PAD(0x5ac, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX1__UART2_RI IOMUX_PAD(0x5ac, 0x168, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX1__GPIO1_14 IOMUX_PAD(0x5ac, 0x168, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX1__IPU_CSI_D_6 IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX1__KPP_COL_1 IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_TX0__ESAI_TX0 IOMUX_PAD(0x5b0, 0x16c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL)
-#define MX35_PAD_TX0__CSPI1_SS3 IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX0__EMI_DTACK_B IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL)
-#define MX35_PAD_TX0__UART2_DCD IOMUX_PAD(0x5b0, 0x16c, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX0__GPIO1_15 IOMUX_PAD(0x5b0, 0x16c, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX0__IPU_CSI_D_7 IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX0__KPP_COL_2 IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x5b4, 0x170, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_MOSI__GPIO1_16 IOMUX_PAD(0x5b4, 0x170, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2 IOMUX_PAD(0x5b4, 0x170, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x5b8, 0x174, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_MISO__GPIO1_17 IOMUX_PAD(0x5b8, 0x174, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3 IOMUX_PAD(0x5b8, 0x174, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x5bc, 0x178, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS0__OWIRE_LINE IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS0__CSPI2_SS3 IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS0__GPIO1_18 IOMUX_PAD(0x5bc, 0x178, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4 IOMUX_PAD(0x5bc, 0x178, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x5c0, 0x17c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS1__PWM_PWMO IOMUX_PAD(0x5c0, 0x17c, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS1__CCM_CLK32K IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS1__GPIO1_19 IOMUX_PAD(0x5c0, 0x17c, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29 IOMUX_PAD(0x5c0, 0x17c, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5 IOMUX_PAD(0x5c0, 0x17c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x5c4, 0x180, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SCLK__GPIO3_4 IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30 IOMUX_PAD(0x5c4, 0x180, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1 IOMUX_PAD(0x5c4, 0x180, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY IOMUX_PAD(0x5c8, 0x184, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5 IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31 IOMUX_PAD(0x5c8, 0x184, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2 IOMUX_PAD(0x5c8, 0x184, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_RXD1__UART1_RXD_MUX IOMUX_PAD(0x5cc, 0x188, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_RXD1__CSPI2_MOSI IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL)
-#define MX35_PAD_RXD1__KPP_COL_4 IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL)
-#define MX35_PAD_RXD1__GPIO3_6 IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL)
-#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16 IOMUX_PAD(0x5cc, 0x188, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_TXD1__UART1_TXD_MUX IOMUX_PAD(0x5d0, 0x18c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TXD1__CSPI2_MISO IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL)
-#define MX35_PAD_TXD1__KPP_COL_5 IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL)
-#define MX35_PAD_TXD1__GPIO3_7 IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL)
-#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17 IOMUX_PAD(0x5d0, 0x18c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_RTS1__UART1_RTS IOMUX_PAD(0x5d4, 0x190, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__CSPI2_SCLK IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__I2C3_SCL IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__IPU_CSI_D_0 IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__KPP_COL_6 IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__GPIO3_8 IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__EMI_NANDF_CE1 IOMUX_PAD(0x5d4, 0x190, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18 IOMUX_PAD(0x5d4, 0x190, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CTS1__UART1_CTS IOMUX_PAD(0x5d8, 0x194, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__CSPI2_RDY IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__I2C3_SDA IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__IPU_CSI_D_1 IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__KPP_COL_7 IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__GPIO3_9 IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__EMI_NANDF_CE2 IOMUX_PAD(0x5d8, 0x194, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19 IOMUX_PAD(0x5d8, 0x194, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_RXD2__UART2_RXD_MUX IOMUX_PAD(0x5dc, 0x198, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_RXD2__KPP_ROW_4 IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL)
-#define MX35_PAD_RXD2__GPIO3_10 IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_TXD2__UART2_TXD_MUX IOMUX_PAD(0x5e0, 0x19c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL)
-#define MX35_PAD_TXD2__KPP_ROW_5 IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL)
-#define MX35_PAD_TXD2__GPIO3_11 IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_RTS2__UART2_RTS IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1 IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__CAN2_RXCAN IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__IPU_CSI_D_2 IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__KPP_ROW_6 IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__GPIO3_12 IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__UART3_RXD_MUX IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CTS2__UART2_CTS IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__CAN2_TXCAN IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__IPU_CSI_D_3 IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__KPP_ROW_7 IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__GPIO3_13 IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__UART3_TXD_MUX IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_RTCK__ARM11P_TOP_RTCK IOMUX_PAD(0x5ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_TCK__SJC_TCK IOMUX_PAD(0x5f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_TMS__SJC_TMS IOMUX_PAD(0x5f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_TDI__SJC_TDI IOMUX_PAD(0x5f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_TDO__SJC_TDO IOMUX_PAD(0x5fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_TRSTB__SJC_TRSTB IOMUX_PAD(0x600, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_DE_B__SJC_DE_B IOMUX_PAD(0x604, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SJC_MOD__SJC_MOD IOMUX_PAD(0x608, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR IOMUX_PAD(0x60c, 0x1a8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR IOMUX_PAD(0x60c, 0x1a8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_USBOTG_PWR__GPIO3_14 IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC IOMUX_PAD(0x610, 0x1ac, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL)
-#define MX35_PAD_USBOTG_OC__GPIO3_15 IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD0__IPU_DISPB_DAT_0 IOMUX_PAD(0x614, 0x1b0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD0__GPIO2_0 IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL)
-#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0 IOMUX_PAD(0x614, 0x1b0, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD1__IPU_DISPB_DAT_1 IOMUX_PAD(0x618, 0x1b4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD1__GPIO2_1 IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1 IOMUX_PAD(0x618, 0x1b4, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD2__IPU_DISPB_DAT_2 IOMUX_PAD(0x61c, 0x1b8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD2__GPIO2_2 IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2 IOMUX_PAD(0x61c, 0x1b8, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD3__IPU_DISPB_DAT_3 IOMUX_PAD(0x620, 0x1bc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD3__GPIO2_3 IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3 IOMUX_PAD(0x620, 0x1bc, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD4__IPU_DISPB_DAT_4 IOMUX_PAD(0x624, 0x1c0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD4__GPIO2_4 IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4 IOMUX_PAD(0x624, 0x1c0, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD5__IPU_DISPB_DAT_5 IOMUX_PAD(0x628, 0x1c4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD5__GPIO2_5 IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5 IOMUX_PAD(0x628, 0x1c4, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD6__IPU_DISPB_DAT_6 IOMUX_PAD(0x62c, 0x1c8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD6__GPIO2_6 IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6 IOMUX_PAD(0x62c, 0x1c8, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD7__IPU_DISPB_DAT_7 IOMUX_PAD(0x630, 0x1cc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD7__GPIO2_7 IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7 IOMUX_PAD(0x630, 0x1cc, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD8__IPU_DISPB_DAT_8 IOMUX_PAD(0x634, 0x1d0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD8__GPIO2_8 IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 IOMUX_PAD(0x634, 0x1d0, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD9__IPU_DISPB_DAT_9 IOMUX_PAD(0x638, 0x1d4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD9__GPIO2_9 IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 IOMUX_PAD(0x638, 0x1d4, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD10__IPU_DISPB_DAT_10 IOMUX_PAD(0x63c, 0x1d8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD10__GPIO2_10 IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10 IOMUX_PAD(0x63c, 0x1d8, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD11__IPU_DISPB_DAT_11 IOMUX_PAD(0x640, 0x1dc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD11__GPIO2_11 IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11 IOMUX_PAD(0x640, 0x1dc, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4 IOMUX_PAD(0x640, 0x1dc, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD12__IPU_DISPB_DAT_12 IOMUX_PAD(0x644, 0x1e0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD12__GPIO2_12 IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12 IOMUX_PAD(0x644, 0x1e0, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5 IOMUX_PAD(0x644, 0x1e0, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD13__IPU_DISPB_DAT_13 IOMUX_PAD(0x648, 0x1e4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD13__GPIO2_13 IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13 IOMUX_PAD(0x648, 0x1e4, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6 IOMUX_PAD(0x648, 0x1e4, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD14__IPU_DISPB_DAT_14 IOMUX_PAD(0x64c, 0x1e8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD14__GPIO2_14 IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x64c, 0x1e8, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7 IOMUX_PAD(0x64c, 0x1e8, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD15__IPU_DISPB_DAT_15 IOMUX_PAD(0x650, 0x1ec, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD15__GPIO2_15 IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x650, 0x1ec, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8 IOMUX_PAD(0x650, 0x1ec, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD16__IPU_DISPB_DAT_16 IOMUX_PAD(0x654, 0x1f0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD16__GPIO2_16 IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x654, 0x1f0, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9 IOMUX_PAD(0x654, 0x1f0, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD17__IPU_DISPB_DAT_17 IOMUX_PAD(0x658, 0x1f4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD17__IPU_DISPB_CS2 IOMUX_PAD(0x658, 0x1f4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD17__GPIO2_17 IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3 IOMUX_PAD(0x658, 0x1f4, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10 IOMUX_PAD(0x658, 0x1f4, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD18__IPU_DISPB_DAT_18 IOMUX_PAD(0x65c, 0x1f8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL)
-#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL)
-#define MX35_PAD_LD18__ESDHC3_CMD IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD18__GPIO3_24 IOMUX_PAD(0x65c, 0x1f8, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4 IOMUX_PAD(0x65c, 0x1f8, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11 IOMUX_PAD(0x65c, 0x1f8, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD19__IPU_DISPB_DAT_19 IOMUX_PAD(0x660, 0x1fc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__IPU_DISPB_BCLK IOMUX_PAD(0x660, 0x1fc, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__IPU_DISPB_CS1 IOMUX_PAD(0x660, 0x1fc, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__ESDHC3_CLK IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__GPIO3_25 IOMUX_PAD(0x660, 0x1fc, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5 IOMUX_PAD(0x660, 0x1fc, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12 IOMUX_PAD(0x660, 0x1fc, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD20__IPU_DISPB_DAT_20 IOMUX_PAD(0x664, 0x200, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD20__IPU_DISPB_CS0 IOMUX_PAD(0x664, 0x200, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD20__IPU_DISPB_SD_CLK IOMUX_PAD(0x664, 0x200, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD20__ESDHC3_DAT0 IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD20__GPIO3_26 IOMUX_PAD(0x664, 0x200, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3 IOMUX_PAD(0x664, 0x200, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13 IOMUX_PAD(0x664, 0x200, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD21__IPU_DISPB_DAT_21 IOMUX_PAD(0x668, 0x204, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__IPU_DISPB_PAR_RS IOMUX_PAD(0x668, 0x204, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__IPU_DISPB_SER_RS IOMUX_PAD(0x668, 0x204, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__ESDHC3_DAT1 IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__USB_TOP_USBOTG_STP IOMUX_PAD(0x668, 0x204, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__GPIO3_27 IOMUX_PAD(0x668, 0x204, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL IOMUX_PAD(0x668, 0x204, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14 IOMUX_PAD(0x668, 0x204, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD22__IPU_DISPB_DAT_22 IOMUX_PAD(0x66c, 0x208, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__IPU_DISPB_WR IOMUX_PAD(0x66c, 0x208, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__IPU_DISPB_SD_D_I IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__ESDHC3_DAT2 IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__GPIO3_28 IOMUX_PAD(0x66c, 0x208, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x66c, 0x208, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__ARM11P_TOP_TRCTL IOMUX_PAD(0x66c, 0x208, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD23__IPU_DISPB_DAT_23 IOMUX_PAD(0x670, 0x20c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD23__IPU_DISPB_RD IOMUX_PAD(0x670, 0x20c, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL)
-#define MX35_PAD_LD23__ESDHC3_DAT3 IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD23__GPIO3_29 IOMUX_PAD(0x670, 0x20c, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x670, 0x20c, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD23__ARM11P_TOP_TRCLK IOMUX_PAD(0x670, 0x20c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC IOMUX_PAD(0x674, 0x210, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL)
-#define MX35_PAD_D3_HSYNC__GPIO3_30 IOMUX_PAD(0x674, 0x210, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x674, 0x210, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15 IOMUX_PAD(0x674, 0x210, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK IOMUX_PAD(0x678, 0x214, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK IOMUX_PAD(0x678, 0x214, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_FPSHIFT__GPIO3_31 IOMUX_PAD(0x678, 0x214, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0 IOMUX_PAD(0x678, 0x214, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16 IOMUX_PAD(0x678, 0x214, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY IOMUX_PAD(0x67c, 0x218, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O IOMUX_PAD(0x67c, 0x218, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_DRDY__GPIO1_0 IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL)
-#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1 IOMUX_PAD(0x67c, 0x218, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17 IOMUX_PAD(0x67c, 0x218, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR IOMUX_PAD(0x680, 0x21c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CONTRAST__GPIO1_1 IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL)
-#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2 IOMUX_PAD(0x680, 0x21c, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18 IOMUX_PAD(0x680, 0x21c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC IOMUX_PAD(0x684, 0x220, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1 IOMUX_PAD(0x684, 0x220, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_VSYNC__GPIO1_2 IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL)
-#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD IOMUX_PAD(0x684, 0x220, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19 IOMUX_PAD(0x684, 0x220, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV IOMUX_PAD(0x688, 0x224, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS IOMUX_PAD(0x688, 0x224, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_REV__GPIO1_3 IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL)
-#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x688, 0x224, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20 IOMUX_PAD(0x688, 0x224, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS IOMUX_PAD(0x68c, 0x228, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_CLS__IPU_DISPB_CS2 IOMUX_PAD(0x68c, 0x228, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_CLS__GPIO1_4 IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL)
-#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x68c, 0x228, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21 IOMUX_PAD(0x68c, 0x228, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL IOMUX_PAD(0x690, 0x22c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL)
-#define MX35_PAD_D3_SPL__GPIO1_5 IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL)
-#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x690, 0x22c, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22 IOMUX_PAD(0x690, 0x22c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x694, 0x230, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CMD__MSHC_SCLK IOMUX_PAD(0x694, 0x230, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CMD__GPIO1_6 IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL IOMUX_PAD(0x694, 0x230, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x698, 0x234, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CLK__MSHC_BS IOMUX_PAD(0x698, 0x234, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK IOMUX_PAD(0x698, 0x234, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CLK__GPIO1_7 IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK IOMUX_PAD(0x698, 0x234, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x69c, 0x238, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA0__MSHC_DATA_0 IOMUX_PAD(0x69c, 0x238, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0 IOMUX_PAD(0x69c, 0x238, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA0__GPIO1_8 IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23 IOMUX_PAD(0x69c, 0x238, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x6a0, 0x23c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA1__MSHC_DATA_1 IOMUX_PAD(0x6a0, 0x23c, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS IOMUX_PAD(0x6a0, 0x23c, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA1__GPIO1_9 IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24 IOMUX_PAD(0x6a0, 0x23c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x6a4, 0x240, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA2__MSHC_DATA_2 IOMUX_PAD(0x6a4, 0x240, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR IOMUX_PAD(0x6a4, 0x240, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA2__GPIO1_10 IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25 IOMUX_PAD(0x6a4, 0x240, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x6a8, 0x244, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA3__MSHC_DATA_3 IOMUX_PAD(0x6a8, 0x244, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD IOMUX_PAD(0x6a8, 0x244, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA3__GPIO1_11 IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26 IOMUX_PAD(0x6a8, 0x244, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x6ac, 0x248, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__I2C3_SCL IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__ESDHC1_DAT4 IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__IPU_CSI_D_2 IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__GPIO2_0 IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x6ac, 0x248, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x6b0, 0x24c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__I2C3_SDA IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__ESDHC1_DAT5 IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__IPU_CSI_D_3 IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__GPIO2_1 IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1 IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2 IOMUX_PAD(0x6b0, 0x24c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x6b4, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6 IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4 IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA0__GPIO2_2 IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x6b8, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX IOMUX_PAD(0x6b8, 0x254, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7 IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5 IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA1__GPIO2_3 IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x6bc, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA2__UART3_RTS IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA2__CAN1_RXCAN IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6 IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA2__GPIO2_4 IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x6c0, 0x25c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA3__UART3_CTS IOMUX_PAD(0x6c0, 0x25c, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA3__CAN1_TXCAN IOMUX_PAD(0x6c0, 0x25c, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7 IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA3__GPIO2_5 IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_CS0__ATA_CS0 IOMUX_PAD(0x6c4, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS0__CSPI1_SS3 IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1 IOMUX_PAD(0x6c4, 0x260, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS0__GPIO2_6 IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS0__IPU_DIAGB_0 IOMUX_PAD(0x6c4, 0x260, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0 IOMUX_PAD(0x6c4, 0x260, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_CS1__ATA_CS1 IOMUX_PAD(0x6c8, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2 IOMUX_PAD(0x6c8, 0x264, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS1__CSPI2_SS0 IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS1__GPIO2_7 IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS1__IPU_DIAGB_1 IOMUX_PAD(0x6c8, 0x264, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1 IOMUX_PAD(0x6c8, 0x264, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DIOR__ATA_DIOR IOMUX_PAD(0x6cc, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0 IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0 IOMUX_PAD(0x6cc, 0x268, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__CSPI2_SS1 IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__GPIO2_8 IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2 IOMUX_PAD(0x6cc, 0x268, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2 IOMUX_PAD(0x6cc, 0x268, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DIOW__ATA_DIOW IOMUX_PAD(0x6d0, 0x26c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1 IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP IOMUX_PAD(0x6d0, 0x26c, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1 IOMUX_PAD(0x6d0, 0x26c, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__CSPI2_MOSI IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__GPIO2_9 IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3 IOMUX_PAD(0x6d0, 0x26c, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3 IOMUX_PAD(0x6d0, 0x26c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DMACK__ATA_DMACK IOMUX_PAD(0x6d4, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2 IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMACK__CSPI2_MISO IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMACK__GPIO2_10 IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4 IOMUX_PAD(0x6d4, 0x270, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0 IOMUX_PAD(0x6d4, 0x270, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_RESET_B__ATA_RESET_B IOMUX_PAD(0x6d8, 0x274, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3 IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O IOMUX_PAD(0x6d8, 0x274, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__CSPI2_RDY IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__GPIO2_11 IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5 IOMUX_PAD(0x6d8, 0x274, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1 IOMUX_PAD(0x6d8, 0x274, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_IORDY__ATA_IORDY IOMUX_PAD(0x6dc, 0x278, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4 IOMUX_PAD(0x6dc, 0x278, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4 IOMUX_PAD(0x6dc, 0x278, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__GPIO2_12 IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6 IOMUX_PAD(0x6dc, 0x278, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2 IOMUX_PAD(0x6dc, 0x278, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA0__ATA_DATA_0 IOMUX_PAD(0x6e0, 0x27c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5 IOMUX_PAD(0x6e0, 0x27c, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5 IOMUX_PAD(0x6e0, 0x27c, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__GPIO2_13 IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7 IOMUX_PAD(0x6e0, 0x27c, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3 IOMUX_PAD(0x6e0, 0x27c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA1__ATA_DATA_1 IOMUX_PAD(0x6e4, 0x280, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6 IOMUX_PAD(0x6e4, 0x280, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK IOMUX_PAD(0x6e4, 0x280, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6 IOMUX_PAD(0x6e4, 0x280, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__GPIO2_14 IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8 IOMUX_PAD(0x6e4, 0x280, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27 IOMUX_PAD(0x6e4, 0x280, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA2__ATA_DATA_2 IOMUX_PAD(0x6e8, 0x284, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7 IOMUX_PAD(0x6e8, 0x284, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS IOMUX_PAD(0x6e8, 0x284, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7 IOMUX_PAD(0x6e8, 0x284, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__GPIO2_15 IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9 IOMUX_PAD(0x6e8, 0x284, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28 IOMUX_PAD(0x6e8, 0x284, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA3__ATA_DATA_3 IOMUX_PAD(0x6ec, 0x288, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__ESDHC3_CLK IOMUX_PAD(0x6ec, 0x288, 1, 0x814, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x6ec, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__CSPI2_SCLK IOMUX_PAD(0x6ec, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__GPIO2_16 IOMUX_PAD(0x6ec, 0x288, 5, 0x884, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10 IOMUX_PAD(0x6ec, 0x288, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29 IOMUX_PAD(0x6ec, 0x288, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA4__ATA_DATA_4 IOMUX_PAD(0x6f0, 0x28c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA4__ESDHC3_CMD IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA4__GPIO2_17 IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11 IOMUX_PAD(0x6f0, 0x28c, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30 IOMUX_PAD(0x6f0, 0x28c, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA5__ATA_DATA_5 IOMUX_PAD(0x6f4, 0x290, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA5__GPIO2_18 IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12 IOMUX_PAD(0x6f4, 0x290, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31 IOMUX_PAD(0x6f4, 0x290, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA6__ATA_DATA_6 IOMUX_PAD(0x6f8, 0x294, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA6__CAN1_TXCAN IOMUX_PAD(0x6f8, 0x294, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA6__UART1_DTR IOMUX_PAD(0x6f8, 0x294, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA6__GPIO2_19 IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13 IOMUX_PAD(0x6f8, 0x294, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA7__ATA_DATA_7 IOMUX_PAD(0x6fc, 0x298, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA7__CAN1_RXCAN IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA7__UART1_DSR IOMUX_PAD(0x6fc, 0x298, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA7__GPIO2_20 IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14 IOMUX_PAD(0x6fc, 0x298, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA8__ATA_DATA_8 IOMUX_PAD(0x700, 0x29c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA8__UART3_RTS IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA8__UART1_RI IOMUX_PAD(0x700, 0x29c, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA8__GPIO2_21 IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15 IOMUX_PAD(0x700, 0x29c, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA9__ATA_DATA_9 IOMUX_PAD(0x704, 0x2a0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA9__UART3_CTS IOMUX_PAD(0x704, 0x2a0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA9__UART1_DCD IOMUX_PAD(0x704, 0x2a0, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA9__GPIO2_22 IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16 IOMUX_PAD(0x704, 0x2a0, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA10__ATA_DATA_10 IOMUX_PAD(0x708, 0x2a4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA10__GPIO2_23 IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17 IOMUX_PAD(0x708, 0x2a4, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA11__ATA_DATA_11 IOMUX_PAD(0x70c, 0x2a8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX IOMUX_PAD(0x70c, 0x2a8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA11__GPIO2_24 IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18 IOMUX_PAD(0x70c, 0x2a8, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA12__ATA_DATA_12 IOMUX_PAD(0x710, 0x2ac, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA12__I2C3_SCL IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA12__GPIO2_25 IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19 IOMUX_PAD(0x710, 0x2ac, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA13__ATA_DATA_13 IOMUX_PAD(0x714, 0x2b0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA13__I2C3_SDA IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA13__GPIO2_26 IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20 IOMUX_PAD(0x714, 0x2b0, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA14__ATA_DATA_14 IOMUX_PAD(0x718, 0x2b4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0 IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA14__KPP_ROW_0 IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA14__GPIO2_27 IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21 IOMUX_PAD(0x718, 0x2b4, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA15__ATA_DATA_15 IOMUX_PAD(0x71c, 0x2b8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1 IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA15__KPP_ROW_1 IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA15__GPIO2_28 IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22 IOMUX_PAD(0x71c, 0x2b8, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_INTRQ__ATA_INTRQ IOMUX_PAD(0x720, 0x2bc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2 IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL)
-#define MX35_PAD_ATA_INTRQ__KPP_ROW_2 IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_INTRQ__GPIO2_29 IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23 IOMUX_PAD(0x720, 0x2bc, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN IOMUX_PAD(0x724, 0x2c0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3 IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL)
-#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3 IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_BUFF_EN__GPIO2_30 IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24 IOMUX_PAD(0x724, 0x2c0, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DMARQ__ATA_DMARQ IOMUX_PAD(0x728, 0x2c4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4 IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMARQ__KPP_COL_0 IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMARQ__GPIO2_31 IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25 IOMUX_PAD(0x728, 0x2c4, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4 IOMUX_PAD(0x728, 0x2c4, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DA0__ATA_DA_0 IOMUX_PAD(0x72c, 0x2c8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA0__IPU_CSI_D_5 IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA0__KPP_COL_1 IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA0__GPIO3_0 IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA0__IPU_DIAGB_26 IOMUX_PAD(0x72c, 0x2c8, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5 IOMUX_PAD(0x72c, 0x2c8, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DA1__ATA_DA_1 IOMUX_PAD(0x730, 0x2cc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA1__IPU_CSI_D_6 IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA1__KPP_COL_2 IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA1__GPIO3_1 IOMUX_PAD(0x730, 0x2cc, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA1__IPU_DIAGB_27 IOMUX_PAD(0x730, 0x2cc, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6 IOMUX_PAD(0x730, 0x2cc, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DA2__ATA_DA_2 IOMUX_PAD(0x734, 0x2d0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA2__IPU_CSI_D_7 IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA2__KPP_COL_3 IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA2__GPIO3_2 IOMUX_PAD(0x734, 0x2d0, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA2__IPU_DIAGB_28 IOMUX_PAD(0x734, 0x2d0, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7 IOMUX_PAD(0x734, 0x2d0, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_MLB_CLK__MLB_MLBCLK IOMUX_PAD(0x738, 0x2d4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_MLB_CLK__GPIO3_3 IOMUX_PAD(0x738, 0x2d4, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_MLB_DAT__MLB_MLBDAT IOMUX_PAD(0x73c, 0x2d8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_MLB_DAT__GPIO3_4 IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_MLB_SIG__MLB_MLBSIG IOMUX_PAD(0x740, 0x2dc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_MLB_SIG__GPIO3_5 IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x744, 0x2e0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4 IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__GPIO3_6 IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0 IOMUX_PAD(0x744, 0x2e0, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK IOMUX_PAD(0x748, 0x2e4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5 IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX IOMUX_PAD(0x748, 0x2e4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP IOMUX_PAD(0x748, 0x2e4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__GPIO3_7 IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1 IOMUX_PAD(0x748, 0x2e4, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x74c, 0x2e8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6 IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__UART3_RTS IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__GPIO3_8 IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK IOMUX_PAD(0x74c, 0x2e8, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2 IOMUX_PAD(0x74c, 0x2e8, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_COL__FEC_COL IOMUX_PAD(0x750, 0x2ec, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__ESDHC1_DAT7 IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__UART3_CTS IOMUX_PAD(0x750, 0x2ec, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__CSPI2_RDY IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__GPIO3_9 IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS IOMUX_PAD(0x750, 0x2ec, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3 IOMUX_PAD(0x750, 0x2ec, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0 IOMUX_PAD(0x754, 0x2f0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__PWM_PWMO IOMUX_PAD(0x754, 0x2f0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__UART3_DTR IOMUX_PAD(0x754, 0x2f0, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__CSPI2_SS0 IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__GPIO3_10 IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1 IOMUX_PAD(0x754, 0x2f0, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4 IOMUX_PAD(0x754, 0x2f0, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0 IOMUX_PAD(0x758, 0x2f4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x758, 0x2f4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__UART3_DSR IOMUX_PAD(0x758, 0x2f4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__CSPI2_SS1 IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__GPIO3_11 IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0 IOMUX_PAD(0x758, 0x2f4, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5 IOMUX_PAD(0x758, 0x2f4, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x75c, 0x2f8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1 IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_EN__UART3_RI IOMUX_PAD(0x75c, 0x2f8, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_EN__GPIO3_12 IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS IOMUX_PAD(0x75c, 0x2f8, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6 IOMUX_PAD(0x75c, 0x2f8, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x760, 0x2fc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDC__CAN2_TXCAN IOMUX_PAD(0x760, 0x2fc, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDC__UART3_DCD IOMUX_PAD(0x760, 0x2fc, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDC__GPIO3_13 IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDC__IPU_DISPB_WR IOMUX_PAD(0x760, 0x2fc, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7 IOMUX_PAD(0x760, 0x2fc, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x764, 0x300, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDIO__CAN2_RXCAN IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDIO__GPIO3_14 IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD IOMUX_PAD(0x764, 0x300, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8 IOMUX_PAD(0x764, 0x300, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR IOMUX_PAD(0x768, 0x304, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_ERR__GPIO3_15 IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9 IOMUX_PAD(0x768, 0x304, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR IOMUX_PAD(0x76c, 0x308, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0 IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_ERR__KPP_COL_4 IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_ERR__GPIO3_16 IOMUX_PAD(0x76c, 0x308, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_CRS__FEC_CRS IOMUX_PAD(0x770, 0x30c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_CRS__IPU_CSI_D_1 IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR IOMUX_PAD(0x770, 0x30c, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_CRS__KPP_COL_5 IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_CRS__GPIO3_17 IOMUX_PAD(0x770, 0x30c, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE IOMUX_PAD(0x770, 0x30c, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1 IOMUX_PAD(0x774, 0x310, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2 IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC IOMUX_PAD(0x774, 0x310, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA1__KPP_COL_6 IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA1__GPIO3_18 IOMUX_PAD(0x774, 0x310, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0 IOMUX_PAD(0x774, 0x310, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1 IOMUX_PAD(0x778, 0x314, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3 IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA1__KPP_COL_7 IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA1__GPIO3_19 IOMUX_PAD(0x778, 0x314, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1 IOMUX_PAD(0x778, 0x314, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2 IOMUX_PAD(0x77c, 0x318, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4 IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA2__KPP_ROW_4 IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA2__GPIO3_20 IOMUX_PAD(0x77c, 0x318, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2 IOMUX_PAD(0x780, 0x31c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5 IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA2__KPP_ROW_5 IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA2__GPIO3_21 IOMUX_PAD(0x780, 0x31c, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3 IOMUX_PAD(0x784, 0x320, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6 IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA3__KPP_ROW_6 IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA3__GPIO3_22 IOMUX_PAD(0x784, 0x320, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3 IOMUX_PAD(0x788, 0x324, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7 IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA3__KPP_ROW_7 IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA3__GPIO3_23 IOMUX_PAD(0x788, 0x324, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK IOMUX_PAD(0x78c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_TEST_MODE__TCU_TEST_MODE IOMUX_PAD(0x790, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-
-
-#endif /* __MACH_IOMUX_MX35_H__ */
diff --git a/arch/arm/mach-imx/iomux-v1.c b/arch/arm/mach-imx/iomux-v1.c
deleted file mode 100644
index a4bec3b..0000000
--- a/arch/arm/mach-imx/iomux-v1.c
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/plat-mxc/iomux-v1.c
- *
- * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH
- * Copyright (C) 2009 Uwe Kleine-Koenig, Pengutronix
- *
- * Common code for i.MX1, i.MX21 and i.MX27
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/map.h>
-
-#include "hardware.h"
-#include "iomux-v1.h"
-
-static void __iomem *imx_iomuxv1_baseaddr;
-static unsigned imx_iomuxv1_numports;
-
-static inline unsigned long imx_iomuxv1_readl(unsigned offset)
-{
- return imx_readl(imx_iomuxv1_baseaddr + offset);
-}
-
-static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset)
-{
- imx_writel(val, imx_iomuxv1_baseaddr + offset);
-}
-
-static inline void imx_iomuxv1_rmwl(unsigned offset,
- unsigned long mask, unsigned long value)
-{
- unsigned long reg = imx_iomuxv1_readl(offset);
-
- reg &= ~mask;
- reg |= value;
-
- imx_iomuxv1_writel(reg, offset);
-}
-
-static inline void imx_iomuxv1_set_puen(
- unsigned int port, unsigned int pin, int on)
-{
- unsigned long mask = 1 << pin;
-
- imx_iomuxv1_rmwl(MXC_PUEN(port), mask, on ? mask : 0);
-}
-
-static inline void imx_iomuxv1_set_ddir(
- unsigned int port, unsigned int pin, int out)
-{
- unsigned long mask = 1 << pin;
-
- imx_iomuxv1_rmwl(MXC_DDIR(port), mask, out ? mask : 0);
-}
-
-static inline void imx_iomuxv1_set_gpr(
- unsigned int port, unsigned int pin, int af)
-{
- unsigned long mask = 1 << pin;
-
- imx_iomuxv1_rmwl(MXC_GPR(port), mask, af ? mask : 0);
-}
-
-static inline void imx_iomuxv1_set_gius(
- unsigned int port, unsigned int pin, int inuse)
-{
- unsigned long mask = 1 << pin;
-
- imx_iomuxv1_rmwl(MXC_GIUS(port), mask, inuse ? mask : 0);
-}
-
-static inline void imx_iomuxv1_set_ocr(
- unsigned int port, unsigned int pin, unsigned int ocr)
-{
- unsigned long shift = (pin & 0xf) << 1;
- unsigned long mask = 3 << shift;
- unsigned long value = ocr << shift;
- unsigned long offset = pin < 16 ? MXC_OCR1(port) : MXC_OCR2(port);
-
- imx_iomuxv1_rmwl(offset, mask, value);
-}
-
-static inline void imx_iomuxv1_set_iconfa(
- unsigned int port, unsigned int pin, unsigned int aout)
-{
- unsigned long shift = (pin & 0xf) << 1;
- unsigned long mask = 3 << shift;
- unsigned long value = aout << shift;
- unsigned long offset = pin < 16 ? MXC_ICONFA1(port) : MXC_ICONFA2(port);
-
- imx_iomuxv1_rmwl(offset, mask, value);
-}
-
-static inline void imx_iomuxv1_set_iconfb(
- unsigned int port, unsigned int pin, unsigned int bout)
-{
- unsigned long shift = (pin & 0xf) << 1;
- unsigned long mask = 3 << shift;
- unsigned long value = bout << shift;
- unsigned long offset = pin < 16 ? MXC_ICONFB1(port) : MXC_ICONFB2(port);
-
- imx_iomuxv1_rmwl(offset, mask, value);
-}
-
-int mxc_gpio_mode(int gpio_mode)
-{
- unsigned int pin = gpio_mode & GPIO_PIN_MASK;
- unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
- unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
- unsigned int aout = (gpio_mode >> GPIO_AOUT_SHIFT) & 3;
- unsigned int bout = (gpio_mode >> GPIO_BOUT_SHIFT) & 3;
-
- if (port >= imx_iomuxv1_numports)
- return -EINVAL;
-
- /* Pullup enable */
- imx_iomuxv1_set_puen(port, pin, gpio_mode & GPIO_PUEN);
-
- /* Data direction */
- imx_iomuxv1_set_ddir(port, pin, gpio_mode & GPIO_OUT);
-
- /* Primary / alternate function */
- imx_iomuxv1_set_gpr(port, pin, gpio_mode & GPIO_AF);
-
- /* use as gpio? */
- imx_iomuxv1_set_gius(port, pin, !(gpio_mode & (GPIO_PF | GPIO_AF)));
-
- imx_iomuxv1_set_ocr(port, pin, ocr);
-
- imx_iomuxv1_set_iconfa(port, pin, aout);
-
- imx_iomuxv1_set_iconfb(port, pin, bout);
-
- return 0;
-}
-
-static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
-{
- size_t i;
- int ret = 0;
-
- for (i = 0; i < count; ++i) {
- ret = mxc_gpio_mode(list[i]);
-
- if (ret)
- return ret;
- }
-
- return ret;
-}
-
-int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
- const char *label)
-{
- int ret;
-
- ret = imx_iomuxv1_setup_multiple(pin_list, count);
- return ret;
-}
-
-int __init imx_iomuxv1_init(void __iomem *base, int numports)
-{
- imx_iomuxv1_baseaddr = base;
- imx_iomuxv1_numports = numports;
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/iomux-v1.h b/arch/arm/mach-imx/iomux-v1.h
deleted file mode 100644
index b948529..0000000
--- a/arch/arm/mach-imx/iomux-v1.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
- */
-#ifndef __MACH_IOMUX_V1_H__
-#define __MACH_IOMUX_V1_H__
-
-/*
-* GPIO Module and I/O Multiplexer
-* x = 0..3 for reg_A, reg_B, reg_C, reg_D
-*/
-#define MXC_DDIR(x) (0x00 + ((x) << 8))
-#define MXC_OCR1(x) (0x04 + ((x) << 8))
-#define MXC_OCR2(x) (0x08 + ((x) << 8))
-#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
-#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
-#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
-#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
-#define MXC_DR(x) (0x1c + ((x) << 8))
-#define MXC_GIUS(x) (0x20 + ((x) << 8))
-#define MXC_SSR(x) (0x24 + ((x) << 8))
-#define MXC_ICR1(x) (0x28 + ((x) << 8))
-#define MXC_ICR2(x) (0x2c + ((x) << 8))
-#define MXC_IMR(x) (0x30 + ((x) << 8))
-#define MXC_ISR(x) (0x34 + ((x) << 8))
-#define MXC_GPR(x) (0x38 + ((x) << 8))
-#define MXC_SWR(x) (0x3c + ((x) << 8))
-#define MXC_PUEN(x) (0x40 + ((x) << 8))
-
-#define MX1_NUM_GPIO_PORT 4
-#define MX21_NUM_GPIO_PORT 6
-#define MX27_NUM_GPIO_PORT 6
-
-#define GPIO_PIN_MASK 0x1f
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
-
-#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
-#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
-#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
-#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
-#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
-#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
-
-#define GPIO_OUT (1 << 8)
-#define GPIO_IN (0 << 8)
-#define GPIO_PUEN (1 << 9)
-
-#define GPIO_PF (1 << 10)
-#define GPIO_AF (1 << 11)
-
-#define GPIO_OCR_SHIFT 12
-#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
-#define GPIO_AIN (0 << GPIO_OCR_SHIFT)
-#define GPIO_BIN (1 << GPIO_OCR_SHIFT)
-#define GPIO_CIN (2 << GPIO_OCR_SHIFT)
-#define GPIO_GPIO (3 << GPIO_OCR_SHIFT)
-
-#define GPIO_AOUT_SHIFT 14
-#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT)
-
-#define GPIO_BOUT_SHIFT 16
-#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT)
-
-extern int mxc_gpio_mode(int gpio_mode);
-extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
- const char *label);
-
-extern int imx_iomuxv1_init(void __iomem *base, int numports);
-
-#endif /* __MACH_IOMUX_V1_H__ */
diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c
deleted file mode 100644
index 043cf3c..0000000
--- a/arch/arm/mach-imx/iomux-v3.c
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
- * <armlinux@phytec.de>
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/map.h>
-
-#include "hardware.h"
-#include "iomux-v3.h"
-
-static void __iomem *base;
-
-/*
- * configures a single pad in the iomuxer
- */
-int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
-{
- u32 mux_ctrl_ofs = (pad & MUX_CTRL_OFS_MASK) >> MUX_CTRL_OFS_SHIFT;
- u32 mux_mode = (pad & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
- u32 sel_input_ofs = (pad & MUX_SEL_INPUT_OFS_MASK) >> MUX_SEL_INPUT_OFS_SHIFT;
- u32 sel_input = (pad & MUX_SEL_INPUT_MASK) >> MUX_SEL_INPUT_SHIFT;
- u32 pad_ctrl_ofs = (pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT;
- u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
-
- if (mux_ctrl_ofs)
- imx_writel(mux_mode, base + mux_ctrl_ofs);
-
- if (sel_input_ofs)
- imx_writel(sel_input, base + sel_input_ofs);
-
- if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
- imx_writel(pad_ctrl, base + pad_ctrl_ofs);
-
- return 0;
-}
-
-int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list,
- unsigned count)
-{
- const iomux_v3_cfg_t *p = pad_list;
- int i;
- int ret;
-
- for (i = 0; i < count; i++) {
- ret = mxc_iomux_v3_setup_pad(*p);
- if (ret)
- return ret;
- p++;
- }
- return 0;
-}
-
-void mxc_iomux_v3_init(void __iomem *iomux_v3_base)
-{
- base = iomux_v3_base;
-}
diff --git a/arch/arm/mach-imx/iomux-v3.h b/arch/arm/mach-imx/iomux-v3.h
deleted file mode 100644
index 7db8ec9..0000000
--- a/arch/arm/mach-imx/iomux-v3.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
- * <armlinux@phytec.de>
- */
-
-#ifndef __MACH_IOMUX_V3_H__
-#define __MACH_IOMUX_V3_H__
-
-/*
- * build IOMUX_PAD structure
- *
- * This iomux scheme is based around pads, which are the physical balls
- * on the processor.
- *
- * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
- * things like driving strength and pullup/pulldown.
- * - Each pad can have but not necessarily does have an output routing register
- * (IOMUXC_SW_MUX_CTL_PAD_x).
- * - Each pad can have but not necessarily does have an input routing register
- * (IOMUXC_x_SELECT_INPUT)
- *
- * The three register sets do not have a fixed offset to each other,
- * hence we order this table by pad control registers (which all pads
- * have) and put the optional i/o routing registers into additional
- * fields.
- *
- * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named
- * GPIO_<unit>_<num>
- *
- * IOMUX/PAD Bit field definitions
- *
- * MUX_CTRL_OFS: 0..11 (12)
- * PAD_CTRL_OFS: 12..23 (12)
- * SEL_INPUT_OFS: 24..35 (12)
- * MUX_MODE + SION: 36..40 (5)
- * PAD_CTRL + NO_PAD_CTRL: 41..57 (17)
- * SEL_INP: 58..61 (4)
- * reserved: 63 (1)
-*/
-
-typedef u64 iomux_v3_cfg_t;
-
-#define MUX_CTRL_OFS_SHIFT 0
-#define MUX_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_CTRL_OFS_SHIFT)
-#define MUX_PAD_CTRL_OFS_SHIFT 12
-#define MUX_PAD_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_PAD_CTRL_OFS_SHIFT)
-#define MUX_SEL_INPUT_OFS_SHIFT 24
-#define MUX_SEL_INPUT_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_SEL_INPUT_OFS_SHIFT)
-
-#define MUX_MODE_SHIFT 36
-#define MUX_MODE_MASK ((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT)
-#define MUX_PAD_CTRL_SHIFT 41
-#define MUX_PAD_CTRL_MASK ((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT)
-#define MUX_SEL_INPUT_SHIFT 58
-#define MUX_SEL_INPUT_MASK ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
-
-#define MUX_PAD_CTRL(x) ((iomux_v3_cfg_t)(x) << MUX_PAD_CTRL_SHIFT)
-
-#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _sel_input_ofs, \
- _sel_input, _pad_ctrl) \
- (((iomux_v3_cfg_t)(_mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT) | \
- ((iomux_v3_cfg_t)(_mux_mode) << MUX_MODE_SHIFT) | \
- ((iomux_v3_cfg_t)(_pad_ctrl_ofs) << MUX_PAD_CTRL_OFS_SHIFT) | \
- ((iomux_v3_cfg_t)(_pad_ctrl) << MUX_PAD_CTRL_SHIFT) | \
- ((iomux_v3_cfg_t)(_sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT) | \
- ((iomux_v3_cfg_t)(_sel_input) << MUX_SEL_INPUT_SHIFT))
-
-#define NEW_PAD_CTRL(cfg, pad) (((cfg) & ~MUX_PAD_CTRL_MASK) | MUX_PAD_CTRL(pad))
-/*
- * Use to set PAD control
- */
-
-#define NO_PAD_CTRL (1 << 16)
-#define PAD_CTL_DVS (1 << 13)
-#define PAD_CTL_HYS (1 << 8)
-
-#define PAD_CTL_PKE (1 << 7)
-#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE)
-#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE)
-#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE)
-#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE)
-#define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE)
-
-#define PAD_CTL_ODE (1 << 3)
-
-#define PAD_CTL_DSE_LOW (0 << 1)
-#define PAD_CTL_DSE_MED (1 << 1)
-#define PAD_CTL_DSE_HIGH (2 << 1)
-#define PAD_CTL_DSE_MAX (3 << 1)
-
-#define PAD_CTL_SRE_FAST (1 << 0)
-#define PAD_CTL_SRE_SLOW (0 << 0)
-
-#define IOMUX_CONFIG_SION (0x1 << 4)
-
-#define MX51_NUM_GPIO_PORT 4
-
-#define GPIO_PIN_MASK 0x1f
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
-
-#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
-#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
-#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
-#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
-#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
-#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
-
-/*
- * setups a single pad in the iomuxer
- */
-int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
-
-/*
- * setups multiple pads
- * convenient way to call the above function with tables
- */
-int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list,
- unsigned count);
-
-/*
- * Initialise the iomux controller
- */
-void mxc_iomux_v3_init(void __iomem *iomux_v3_base);
-
-#endif /* __MACH_IOMUX_V3_H__*/
-
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
deleted file mode 100644
index 4d9a56f..0000000
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ /dev/null
@@ -1,562 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * armadillo5x0.c
- *
- * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- * updates in http://alberdroid.blogspot.com/
- *
- * Based on Atmark Techno, Inc. armadillo 500 BSP 2008
- * Based on mx31ads.c and pcm037.c Great Work!
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/delay.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx31.h"
-#include "crmregs-imx3.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-#include "ulpi.h"
-
-static int armadillo5x0_pins[] = {
- /* UART1 */
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
- /* UART2 */
- MX31_PIN_CTS2__CTS2,
- MX31_PIN_RTS2__RTS2,
- MX31_PIN_TXD2__TXD2,
- MX31_PIN_RXD2__RXD2,
- /* LAN9118_IRQ */
- IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO),
- /* SDHC1 */
- MX31_PIN_SD1_DATA3__SD1_DATA3,
- MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA1__SD1_DATA1,
- MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_CLK__SD1_CLK,
- MX31_PIN_SD1_CMD__SD1_CMD,
- /* Framebuffer */
- MX31_PIN_LD0__LD0,
- MX31_PIN_LD1__LD1,
- MX31_PIN_LD2__LD2,
- MX31_PIN_LD3__LD3,
- MX31_PIN_LD4__LD4,
- MX31_PIN_LD5__LD5,
- MX31_PIN_LD6__LD6,
- MX31_PIN_LD7__LD7,
- MX31_PIN_LD8__LD8,
- MX31_PIN_LD9__LD9,
- MX31_PIN_LD10__LD10,
- MX31_PIN_LD11__LD11,
- MX31_PIN_LD12__LD12,
- MX31_PIN_LD13__LD13,
- MX31_PIN_LD14__LD14,
- MX31_PIN_LD15__LD15,
- MX31_PIN_LD16__LD16,
- MX31_PIN_LD17__LD17,
- MX31_PIN_VSYNC3__VSYNC3,
- MX31_PIN_HSYNC__HSYNC,
- MX31_PIN_FPSHIFT__FPSHIFT,
- MX31_PIN_DRDY0__DRDY0,
- IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
- /* I2C2 */
- MX31_PIN_CSPI2_MOSI__SCL,
- MX31_PIN_CSPI2_MISO__SDA,
- /* OTG */
- MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
- MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
- MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
- MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
- MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
- MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
- MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
- MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
- MX31_PIN_USBOTG_CLK__USBOTG_CLK,
- MX31_PIN_USBOTG_DIR__USBOTG_DIR,
- MX31_PIN_USBOTG_NXT__USBOTG_NXT,
- MX31_PIN_USBOTG_STP__USBOTG_STP,
- /* USB host 2 */
- IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
-};
-
-/* USB */
-
-#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4)
-#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6)
-#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int usbotg_init(struct platform_device *pdev)
-{
- int err;
-
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
- /* Chip already enabled by hardware */
- /* OTG phy reset*/
- err = gpio_request(OTG_RESET, "USB-OTG-RESET");
- if (err) {
- pr_err("Failed to request the usb otg reset gpio\n");
- return err;
- }
-
- err = gpio_direction_output(OTG_RESET, 1/*HIGH*/);
- if (err) {
- pr_err("Failed to reset the usb otg phy\n");
- goto otg_free_reset;
- }
-
- gpio_set_value(OTG_RESET, 0/*LOW*/);
- mdelay(5);
- gpio_set_value(OTG_RESET, 1/*HIGH*/);
- mdelay(10);
-
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
- MXC_EHCI_INTERFACE_DIFF_UNI);
-
-otg_free_reset:
- gpio_free(OTG_RESET);
- return err;
-}
-
-static int usbh2_init(struct platform_device *pdev)
-{
- int err;
-
- mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
-
- mxc_iomux_set_gpr(MUX_PGP_UH2, true);
-
-
- /* Enable the chip */
- err = gpio_request(USBH2_CS, "USB-H2-CS");
- if (err) {
- pr_err("Failed to request the usb host 2 CS gpio\n");
- return err;
- }
-
- err = gpio_direction_output(USBH2_CS, 0/*Enabled*/);
- if (err) {
- pr_err("Failed to drive the usb host 2 CS gpio\n");
- goto h2_free_cs;
- }
-
- /* H2 phy reset*/
- err = gpio_request(USBH2_RESET, "USB-H2-RESET");
- if (err) {
- pr_err("Failed to request the usb host 2 reset gpio\n");
- goto h2_free_cs;
- }
-
- err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/);
- if (err) {
- pr_err("Failed to reset the usb host 2 phy\n");
- goto h2_free_reset;
- }
-
- gpio_set_value(USBH2_RESET, 0/*LOW*/);
- mdelay(5);
- gpio_set_value(USBH2_RESET, 1/*HIGH*/);
- mdelay(10);
-
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
- MXC_EHCI_INTERFACE_DIFF_UNI);
-
-h2_free_reset:
- gpio_free(USBH2_RESET);
-h2_free_cs:
- gpio_free(USBH2_CS);
- return err;
-}
-
-static struct mxc_usbh_platform_data usbotg_pdata __initdata = {
- .init = usbotg_init,
- .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
- .init = usbh2_init,
- .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-/* RTC over I2C*/
-#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4)
-
-static struct i2c_board_info armadillo5x0_i2c_rtc = {
- I2C_BOARD_INFO("s35390a", 0x30),
-};
-
-/* GPIO BUTTONS */
-static struct gpio_keys_button armadillo5x0_buttons[] = {
- {
- .code = KEY_ENTER, /*28*/
- .gpio = IOMUX_TO_GPIO(MX31_PIN_SCLK0),
- .active_low = 1,
- .desc = "menu",
- .wakeup = 1,
- }, {
- .code = KEY_BACK, /*158*/
- .gpio = IOMUX_TO_GPIO(MX31_PIN_SRST0),
- .active_low = 1,
- .desc = "back",
- .wakeup = 1,
- }
-};
-
-static const struct gpio_keys_platform_data
- armadillo5x0_button_data __initconst = {
- .buttons = armadillo5x0_buttons,
- .nbuttons = ARRAY_SIZE(armadillo5x0_buttons),
-};
-
-/*
- * NAND Flash
- */
-static const struct mxc_nand_platform_data
-armadillo5x0_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-/*
- * MTD NOR Flash
- */
-static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
- {
- .name = "nor.bootloader",
- .offset = 0x00000000,
- .size = 4*32*1024,
- }, {
- .name = "nor.kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = 16*128*1024,
- }, {
- .name = "nor.userland",
- .offset = MTDPART_OFS_APPEND,
- .size = 110*128*1024,
- }, {
- .name = "nor.config",
- .offset = MTDPART_OFS_APPEND,
- .size = 1*128*1024,
- },
-};
-
-static const struct physmap_flash_data
- armadillo5x0_nor_flash_pdata __initconst = {
- .width = 2,
- .parts = armadillo5x0_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
-};
-
-static const struct resource armadillo5x0_nor_flash_resource __initconst = {
- .flags = IORESOURCE_MEM,
- .start = MX31_CS0_BASE_ADDR,
- .end = MX31_CS0_BASE_ADDR + SZ_64M - 1,
-};
-
-/*
- * FB support
- */
-static const struct fb_videomode fb_modedb[] = {
- { /* 640x480 @ 60 Hz */
- .name = "CRT-VGA",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 39721,
- .left_margin = 35,
- .right_margin = 115,
- .upper_margin = 43,
- .lower_margin = 1,
- .hsync_len = 10,
- .vsync_len = 1,
- .sync = FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {/* 800x600 @ 56 Hz */
- .name = "CRT-SVGA",
- .refresh = 56,
- .xres = 800,
- .yres = 600,
- .pixclock = 30000,
- .left_margin = 30,
- .right_margin = 108,
- .upper_margin = 13,
- .lower_margin = 10,
- .hsync_len = 10,
- .vsync_len = 1,
- .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT |
- FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
- .name = "CRT-VGA",
- .mode = fb_modedb,
- .num_modes = ARRAY_SIZE(fb_modedb),
-};
-
-/*
- * SDHC 1
- * MMC support
- */
-static int armadillo5x0_sdhc1_get_ro(struct device *dev)
-{
- return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
-}
-
-static int armadillo5x0_sdhc1_init(struct device *dev,
- irq_handler_t detect_irq, void *data)
-{
- int ret;
- int gpio_det, gpio_wp;
-
- gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK);
- gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B);
-
- ret = gpio_request(gpio_det, "sdhc-card-detect");
- if (ret)
- return ret;
-
- gpio_direction_input(gpio_det);
-
- ret = gpio_request(gpio_wp, "sdhc-write-protect");
- if (ret)
- goto err_gpio_free;
-
- gpio_direction_input(gpio_wp);
-
- /* When supported the trigger type have to be BOTH */
- ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)),
- detect_irq, IRQF_TRIGGER_FALLING,
- "sdhc-detect", data);
-
- if (ret)
- goto err_gpio_free_2;
-
- return 0;
-
-err_gpio_free_2:
- gpio_free(gpio_wp);
-
-err_gpio_free:
- gpio_free(gpio_det);
-
- return ret;
-
-}
-
-static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), data);
- gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
- gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
-}
-
-static const struct imxmmc_platform_data sdhc_pdata __initconst = {
- .get_ro = armadillo5x0_sdhc1_get_ro,
- .init = armadillo5x0_sdhc1_init,
- .exit = armadillo5x0_sdhc1_exit,
-};
-
-/*
- * SMSC 9118
- * Network support
- */
-static struct resource armadillo5x0_smc911x_resources[] = {
- {
- .start = MX31_CS3_BASE_ADDR,
- .end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_info = {
- .flags = SMSC911X_USE_16BIT,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device armadillo5x0_smc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(armadillo5x0_smc911x_resources),
- .resource = armadillo5x0_smc911x_resources,
- .dev = {
- .platform_data = &smsc911x_info,
- },
-};
-
-/* UART device data */
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *devices[] __initdata = {
- &armadillo5x0_smc911x_device,
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-/*
- * Perform board specific initializations
- */
-static void __init armadillo5x0_init(void)
-{
- imx31_soc_init();
-
- mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
- ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- imx31_add_imx_i2c1(NULL);
-
- /* Register UART */
- imx31_add_imx_uart0(&uart_pdata);
- imx31_add_imx_uart1(&uart_pdata);
-
- /* Register FB */
- imx31_add_ipu_core();
- imx31_add_mx3_sdc_fb(&mx3fb_pdata);
-
- /* Register NOR Flash */
- platform_device_register_resndata(NULL, "physmap-flash", -1,
- &armadillo5x0_nor_flash_resource, 1,
- &armadillo5x0_nor_flash_pdata,
- sizeof(armadillo5x0_nor_flash_pdata));
-
- /* Register NAND Flash */
- imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
-
- /* set NAND page size to 2k if not configured via boot mode pins */
- imx_writel(imx_readl(mx3_ccm_base + MXC_CCM_RCSR) | (1 << 30),
- mx3_ccm_base + MXC_CCM_RCSR);
-}
-
-static void __init armadillo5x0_late(void)
-{
- armadillo5x0_smc911x_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
- armadillo5x0_smc911x_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- imx_add_gpio_keys(&armadillo5x0_button_data);
-
- /* SMSC9118 IRQ pin */
- gpio_direction_input(MX31_PIN_GPIO1_0);
-
- /* Register SDHC */
- imx31_add_mxc_mmc(0, &sdhc_pdata);
-
- /* RTC */
- /* Get RTC IRQ and register the chip */
- if (!gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc")) {
- if (!gpio_direction_input(ARMADILLO5X0_RTC_GPIO))
- armadillo5x0_i2c_rtc.irq =
- gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
- else
- gpio_free(ARMADILLO5X0_RTC_GPIO);
- }
-
- if (armadillo5x0_i2c_rtc.irq == 0)
- pr_warn("armadillo5x0_init: failed to get RTC IRQ\n");
- i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
-
- /* USB */
- usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (usbotg_pdata.otg)
- imx31_add_mxc_ehci_otg(&usbotg_pdata);
- usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (usbh2_pdata.otg)
- imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-}
-
-static void __init armadillo5x0_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-MACHINE_START(ARMADILLO5X0, "Armadillo-500")
- /* Maintainer: Alberto Panizzo */
- .atag_offset = 0x100,
- .map_io = mx31_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = armadillo5x0_timer_init,
- .init_machine = armadillo5x0_init,
- .init_late = armadillo5x0_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c
deleted file mode 100644
index 3929208..0000000
--- a/arch/arm/mach-imx/mach-bug.c
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "common.h"
-#include "devices-imx31.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const unsigned int bug_pins[] __initconst = {
- MX31_PIN_PC_RST__CTS5,
- MX31_PIN_PC_VS2__RTS5,
- MX31_PIN_PC_BVD2__TXD5,
- MX31_PIN_PC_BVD1__RXD5,
-};
-
-static void __init bug_board_init(void)
-{
- imx31_soc_init();
-
- mxc_iomux_setup_multiple_pins(bug_pins,
- ARRAY_SIZE(bug_pins), "uart-4");
- imx31_add_imx_uart4(&uart_pdata);
-}
-
-static void __init bug_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-MACHINE_START(BUG, "BugLabs BUGBase")
- .map_io = mx31_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = bug_timer_init,
- .init_machine = bug_board_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27.c b/arch/arm/mach-imx/mach-imx27.c
new file mode 100644
index 0000000..262422a
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx27.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/mm.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include "common.h"
+#include "hardware.h"
+#include "mx27.h"
+
+/* MX27 memory map definition */
+static struct map_desc imx27_io_desc[] __initdata = {
+ /*
+ * this fixed mapping covers:
+ * - AIPI1
+ * - AIPI2
+ * - AITC
+ * - ROM Patch
+ * - and some reserved space
+ */
+ imx_map_entry(MX27, AIPI, MT_DEVICE),
+ /*
+ * this fixed mapping covers:
+ * - CSI
+ * - ATA
+ */
+ imx_map_entry(MX27, SAHB1, MT_DEVICE),
+ /*
+ * this fixed mapping covers:
+ * - EMI
+ */
+ imx_map_entry(MX27, X_MEMC, MT_DEVICE),
+};
+
+/*
+ * Initialize the memory map. It is called during the
+ * system startup to create static physical to virtual
+ * memory map for the IO modules.
+ */
+static void __init mx27_map_io(void)
+{
+ iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
+}
+
+static void __init imx27_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX27);
+}
+
+static void __init mx27_init_irq(void)
+{
+ void __iomem *avic_base;
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,avic");
+ avic_base = of_iomap(np, 0);
+ BUG_ON(!avic_base);
+ mxc_init_irq(avic_base);
+}
+
+static const char * const imx27_dt_board_compat[] __initconst = {
+ "fsl,imx27",
+ NULL
+};
+
+DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
+ .map_io = mx27_map_io,
+ .init_early = imx27_init_early,
+ .init_irq = mx27_init_irq,
+ .init_late = imx27_pm_init,
+ .dt_compat = imx27_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
deleted file mode 100644
index a329e50..0000000
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ /dev/null
@@ -1,562 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * mach-imx27_visstrim_m10.c
- *
- * Copyright 2010 Javier Martin <javier.martin@vista-silicon.com>
- *
- * Based on mach-pcm038.c, mach-pca100.c, mach-mx27ads.c and others.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/dma-map-ops.h>
-#include <linux/leds.h>
-#include <linux/platform_data/asoc-mx27vis.h>
-#include <sound/tlv320aic32x4.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/system_info.h>
-#include <asm/memblock.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-
-#define TVP5150_RSTN (GPIO_PORTC + 18)
-#define TVP5150_PWDN (GPIO_PORTC + 19)
-#define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
-#define SDHC1_IRQ_GPIO IMX_GPIO_NR(2, 25)
-
-#define VERSION_MASK 0x7
-#define MOTHERBOARD_SHIFT 4
-#define EXPBOARD_SHIFT 0
-
-#define MOTHERBOARD_BIT2 (GPIO_PORTD + 31)
-#define MOTHERBOARD_BIT1 (GPIO_PORTD + 30)
-#define MOTHERBOARD_BIT0 (GPIO_PORTD + 29)
-
-#define EXPBOARD_BIT2 (GPIO_PORTD + 25)
-#define EXPBOARD_BIT1 (GPIO_PORTD + 27)
-#define EXPBOARD_BIT0 (GPIO_PORTD + 28)
-
-#define AMP_GAIN_0 (GPIO_PORTF + 9)
-#define AMP_GAIN_1 (GPIO_PORTF + 8)
-#define AMP_MUTE_SDL (GPIO_PORTE + 5)
-#define AMP_MUTE_SDR (GPIO_PORTF + 7)
-
-static const int visstrim_m10_pins[] __initconst = {
- /* UART1 (console) */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
- /* SSI1 */
- PC20_PF_SSI1_FS,
- PC21_PF_SSI1_RXD,
- PC22_PF_SSI1_TXD,
- PC23_PF_SSI1_CLK,
- /* SDHC1 */
- PE18_PF_SD1_D0,
- PE19_PF_SD1_D1,
- PE20_PF_SD1_D2,
- PE21_PF_SD1_D3,
- PE22_PF_SD1_CMD,
- PE23_PF_SD1_CLK,
- /* Both I2Cs */
- PD17_PF_I2C_DATA,
- PD18_PF_I2C_CLK,
- PC5_PF_I2C2_SDA,
- PC6_PF_I2C2_SCL,
- /* USB OTG */
- OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
- PC9_PF_USBOTG_DATA0,
- PC11_PF_USBOTG_DATA1,
- PC10_PF_USBOTG_DATA2,
- PC13_PF_USBOTG_DATA3,
- PC12_PF_USBOTG_DATA4,
- PC7_PF_USBOTG_DATA5,
- PC8_PF_USBOTG_DATA6,
- PE25_PF_USBOTG_DATA7,
- PE24_PF_USBOTG_CLK,
- PE2_PF_USBOTG_DIR,
- PE0_PF_USBOTG_NXT,
- PE1_PF_USBOTG_STP,
- PB23_PF_USB_PWR,
- PB24_PF_USB_OC,
- /* CSI */
- TVP5150_RSTN | GPIO_GPIO | GPIO_OUT,
- TVP5150_PWDN | GPIO_GPIO | GPIO_OUT,
- PB10_PF_CSI_D0,
- PB11_PF_CSI_D1,
- PB12_PF_CSI_D2,
- PB13_PF_CSI_D3,
- PB14_PF_CSI_D4,
- PB15_PF_CSI_MCLK,
- PB16_PF_CSI_PIXCLK,
- PB17_PF_CSI_D5,
- PB18_PF_CSI_D6,
- PB19_PF_CSI_D7,
- PB20_PF_CSI_VSYNC,
- PB21_PF_CSI_HSYNC,
- /* mother board version */
- MOTHERBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
- MOTHERBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
- MOTHERBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
- /* expansion board version */
- EXPBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
- EXPBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
- EXPBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
- /* Audio AMP control */
- AMP_GAIN_0 | GPIO_GPIO | GPIO_OUT,
- AMP_GAIN_1 | GPIO_GPIO | GPIO_OUT,
- AMP_MUTE_SDL | GPIO_GPIO | GPIO_OUT,
- AMP_MUTE_SDR | GPIO_GPIO | GPIO_OUT,
-};
-
-static struct gpio visstrim_m10_version_gpios[] = {
- { EXPBOARD_BIT0, GPIOF_IN, "exp-version-0" },
- { EXPBOARD_BIT1, GPIOF_IN, "exp-version-1" },
- { EXPBOARD_BIT2, GPIOF_IN, "exp-version-2" },
- { MOTHERBOARD_BIT0, GPIOF_IN, "mother-version-0" },
- { MOTHERBOARD_BIT1, GPIOF_IN, "mother-version-1" },
- { MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" },
-};
-
-static const struct gpio visstrim_m10_gpios[] __initconst = {
- {
- .gpio = TVP5150_RSTN,
- .flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH,
- .label = "tvp5150_rstn",
- },
- {
- .gpio = TVP5150_PWDN,
- .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
- .label = "tvp5150_pwdn",
- },
- {
- .gpio = OTG_PHY_CS_GPIO,
- .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
- .label = "usbotg_cs",
- },
- {
- .gpio = AMP_GAIN_0,
- .flags = GPIOF_DIR_OUT,
- .label = "amp-gain-0",
- },
- {
- .gpio = AMP_GAIN_1,
- .flags = GPIOF_DIR_OUT,
- .label = "amp-gain-1",
- },
- {
- .gpio = AMP_MUTE_SDL,
- .flags = GPIOF_DIR_OUT,
- .label = "amp-mute-sdl",
- },
- {
- .gpio = AMP_MUTE_SDR,
- .flags = GPIOF_DIR_OUT,
- .label = "amp-mute-sdr",
- },
-};
-
-/* Camera */
-static struct mx2_camera_platform_data visstrim_camera = {
- .flags = MX2_CAMERA_CCIR | MX2_CAMERA_CCIR_INTERLACE |
- MX2_CAMERA_PCLK_SAMPLE_RISING,
- .clk = 100000,
-};
-
-static phys_addr_t mx2_camera_base __initdata;
-#define MX2_CAMERA_BUF_SIZE SZ_8M
-
-static void __init visstrim_analog_camera_init(void)
-{
- struct platform_device *pdev;
-
- gpio_set_value(TVP5150_PWDN, 1);
- ndelay(1);
- gpio_set_value(TVP5150_RSTN, 0);
- ndelay(500);
- gpio_set_value(TVP5150_RSTN, 1);
- ndelay(200000);
-
- pdev = imx27_add_mx2_camera(&visstrim_camera);
- if (IS_ERR(pdev))
- return;
-
- dma_declare_coherent_memory(&pdev->dev, mx2_camera_base,
- mx2_camera_base, MX2_CAMERA_BUF_SIZE);
-}
-
-static void __init visstrim_reserve(void)
-{
- /* reserve 4 MiB for mx2-camera */
- mx2_camera_base = arm_memblock_steal(3 * MX2_CAMERA_BUF_SIZE,
- MX2_CAMERA_BUF_SIZE);
-}
-
-/* GPIOs used as events for applications */
-static struct gpio_keys_button visstrim_gpio_keys[] = {
- {
- .type = EV_KEY,
- .code = KEY_RESTART,
- .gpio = (GPIO_PORTC + 15),
- .desc = "Default config",
- .active_low = 0,
- .wakeup = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_RECORD,
- .gpio = (GPIO_PORTF + 14),
- .desc = "Record",
- .active_low = 0,
- .wakeup = 1,
- },
- {
- .type = EV_KEY,
- .code = KEY_STOP,
- .gpio = (GPIO_PORTF + 13),
- .desc = "Stop",
- .active_low = 0,
- .wakeup = 1,
- }
-};
-
-static const struct gpio_keys_platform_data
- visstrim_gpio_keys_platform_data __initconst = {
- .buttons = visstrim_gpio_keys,
- .nbuttons = ARRAY_SIZE(visstrim_gpio_keys),
-};
-
-/* led */
-static const struct gpio_led visstrim_m10_leds[] __initconst = {
- {
- .name = "visstrim:ld0",
- .default_trigger = "nand-disk",
- .gpio = (GPIO_PORTC + 29),
- },
- {
- .name = "visstrim:ld1",
- .default_trigger = "nand-disk",
- .gpio = (GPIO_PORTC + 24),
- },
- {
- .name = "visstrim:ld2",
- .default_trigger = "nand-disk",
- .gpio = (GPIO_PORTC + 28),
- },
- {
- .name = "visstrim:ld3",
- .default_trigger = "nand-disk",
- .gpio = (GPIO_PORTC + 25),
- },
-};
-
-static const struct gpio_led_platform_data visstrim_m10_led_data __initconst = {
- .leds = visstrim_m10_leds,
- .num_leds = ARRAY_SIZE(visstrim_m10_leds),
-};
-
-/* Visstrim_SM10 has a microSD slot connected to sdhc1 */
-static int visstrim_m10_sdhc1_init(struct device *dev,
- irq_handler_t detect_irq, void *data)
-{
- int ret;
-
- ret = request_irq(gpio_to_irq(SDHC1_IRQ_GPIO), detect_irq,
- IRQF_TRIGGER_FALLING, "mmc-detect", data);
- return ret;
-}
-
-static void visstrim_m10_sdhc1_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(SDHC1_IRQ_GPIO), data);
-}
-
-static const struct imxmmc_platform_data visstrim_m10_sdhc_pdata __initconst = {
- .init = visstrim_m10_sdhc1_init,
- .exit = visstrim_m10_sdhc1_exit,
-};
-
-/* Visstrim_SM10 NOR flash */
-static struct physmap_flash_data visstrim_m10_flash_data = {
- .width = 2,
-};
-
-static struct resource visstrim_m10_flash_resource = {
- .start = 0xc0000000,
- .end = 0xc0000000 + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device visstrim_m10_nor_mtd_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &visstrim_m10_flash_data,
- },
- .num_resources = 1,
- .resource = &visstrim_m10_flash_resource,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &visstrim_m10_nor_mtd_device,
-};
-
-/* Visstrim_M10 uses UART0 as console */
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-/* I2C */
-static const struct imxi2c_platform_data visstrim_m10_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static struct pca953x_platform_data visstrim_m10_pca9555_pdata = {
- .gpio_base = 240, /* After MX27 internal GPIOs */
- .invert = 0,
-};
-
-static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = {
- .power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN |
- AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE |
- AIC32X4_PWR_AIC32X4_LDO_ENABLE |
- AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 |
- AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED,
- .micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K |
- AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K,
- .swapdacs = false,
-};
-
-static struct i2c_board_info visstrim_m10_i2c_devices[] = {
- {
- I2C_BOARD_INFO("pca9555", 0x20),
- .platform_data = &visstrim_m10_pca9555_pdata,
- },
- {
- I2C_BOARD_INFO("tlv320aic32x4", 0x18),
- .platform_data = &visstrim_m10_aic32x4_pdata,
- },
- {
- I2C_BOARD_INFO("m41t00", 0x68),
- }
-};
-
-/* USB OTG */
-static int otg_phy_init(struct platform_device *pdev)
-{
- return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static const struct mxc_usbh_platform_data
-visstrim_m10_usbotg_pdata __initconst = {
- .init = otg_phy_init,
- .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-/* SSI */
-static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = {
- .flags = IMX_SSI_DMA | IMX_SSI_SYN,
-};
-
-/* coda */
-
-static void __init visstrim_coda_init(void)
-{
- struct platform_device *pdev;
-
- pdev = imx27_add_coda();
- dma_declare_coherent_memory(&pdev->dev,
- mx2_camera_base + MX2_CAMERA_BUF_SIZE,
- mx2_camera_base + MX2_CAMERA_BUF_SIZE,
- MX2_CAMERA_BUF_SIZE);
-}
-
-/* DMA deinterlace */
-static struct platform_device visstrim_deinterlace = {
- .name = "m2m-deinterlace",
- .id = 0,
-};
-
-static void __init visstrim_deinterlace_init(void)
-{
- int ret = -ENOMEM;
- struct platform_device *pdev = &visstrim_deinterlace;
-
- ret = platform_device_register(pdev);
-
- dma_declare_coherent_memory(&pdev->dev,
- mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE,
- mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE,
- MX2_CAMERA_BUF_SIZE);
-}
-
-/* Emma-PrP for format conversion */
-static void __init visstrim_emmaprp_init(void)
-{
- struct platform_device *pdev;
- int ret;
-
- pdev = imx27_add_mx2_emmaprp();
- if (IS_ERR(pdev))
- return;
-
- /*
- * Use the same memory area as the analog camera since both
- * devices are, by nature, exclusive.
- */
- ret = dma_declare_coherent_memory(&pdev->dev,
- mx2_camera_base, mx2_camera_base,
- MX2_CAMERA_BUF_SIZE);
- if (ret)
- pr_err("Failed to declare memory for emmaprp\n");
-}
-
-/* Audio */
-static const struct snd_mx27vis_platform_data snd_mx27vis_pdata __initconst = {
- .amp_gain0_gpio = AMP_GAIN_0,
- .amp_gain1_gpio = AMP_GAIN_1,
- .amp_mutel_gpio = AMP_MUTE_SDL,
- .amp_muter_gpio = AMP_MUTE_SDR,
-};
-
-static void __init visstrim_m10_revision(void)
-{
- int exp_version = 0;
- int mo_version = 0;
- int ret;
-
- ret = gpio_request_array(visstrim_m10_version_gpios,
- ARRAY_SIZE(visstrim_m10_version_gpios));
- if (ret) {
- pr_err("Failed to request version gpios");
- return;
- }
-
- /* Get expansion board version (negative logic) */
- exp_version |= !gpio_get_value(EXPBOARD_BIT2) << 2;
- exp_version |= !gpio_get_value(EXPBOARD_BIT1) << 1;
- exp_version |= !gpio_get_value(EXPBOARD_BIT0);
-
- /* Get mother board version (negative logic) */
- mo_version |= !gpio_get_value(MOTHERBOARD_BIT2) << 2;
- mo_version |= !gpio_get_value(MOTHERBOARD_BIT1) << 1;
- mo_version |= !gpio_get_value(MOTHERBOARD_BIT0);
-
- system_rev = 0x27000;
- system_rev |= (mo_version << MOTHERBOARD_SHIFT);
- system_rev |= (exp_version << EXPBOARD_SHIFT);
-}
-
-static void __init visstrim_m10_board_init(void)
-{
- int ret;
-
- imx27_soc_init();
- visstrim_m10_revision();
-
- ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins,
- ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10");
- if (ret)
- pr_err("Failed to setup pins (%d)\n", ret);
-
- imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
- imx27_add_imx_uart0(&uart_pdata);
-
- imx27_add_imx_i2c(0, &visstrim_m10_i2c_data);
- imx27_add_imx_i2c(1, &visstrim_m10_i2c_data);
- i2c_register_board_info(0, visstrim_m10_i2c_devices,
- ARRAY_SIZE(visstrim_m10_i2c_devices));
-
- imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
- imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
- imx27_add_fec(NULL);
-
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init visstrim_m10_late_init(void)
-{
- int mo_version, ret;
-
- ret = gpio_request_array(visstrim_m10_gpios,
- ARRAY_SIZE(visstrim_m10_gpios));
- if (ret)
- pr_err("Failed to request gpios (%d)\n", ret);
-
- imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
-
- imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata,
- sizeof(snd_mx27vis_pdata));
-
- gpio_led_register_device(0, &visstrim_m10_led_data);
-
- /* Use mother board version to decide what video devices we shall use */
- mo_version = (system_rev >> MOTHERBOARD_SHIFT) & VERSION_MASK;
- if (mo_version & 0x1) {
- visstrim_emmaprp_init();
-
- /*
- * Despite not being used, tvp5150 must be
- * powered on to avoid I2C problems. To minimize
- * power consupmtion keep reset enabled.
- */
- gpio_set_value(TVP5150_PWDN, 1);
- ndelay(1);
- gpio_set_value(TVP5150_RSTN, 0);
- } else {
- visstrim_deinterlace_init();
- visstrim_analog_camera_init();
- }
-
- visstrim_coda_init();
-}
-
-static void __init visstrim_m10_timer_init(void)
-{
- mx27_clocks_init((unsigned long)25000000);
-}
-
-MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
- .atag_offset = 0x100,
- .reserve = visstrim_reserve,
- .map_io = mx27_map_io,
- .init_early = imx27_init_early,
- .init_irq = mx27_init_irq,
- .init_time = visstrim_m10_timer_init,
- .init_machine = visstrim_m10_board_init,
- .init_late = visstrim_m10_late_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/mach-imx31.c
similarity index 100%
rename from arch/arm/mach-imx/imx31-dt.c
rename to arch/arm/mach-imx/mach-imx31.c
diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/mach-imx35.c
similarity index 100%
rename from arch/arm/mach-imx/imx35-dt.c
rename to arch/arm/mach-imx/mach-imx35.c
diff --git a/arch/arm/mach-imx/mach-imx7ulp.c b/arch/arm/mach-imx/mach-imx7ulp.c
index 128cf4c..445256e 100644
--- a/arch/arm/mach-imx/mach-imx7ulp.c
+++ b/arch/arm/mach-imx/mach-imx7ulp.c
@@ -67,6 +67,9 @@ static const char *const imx7ulp_dt_compat[] __initconst = {
static void __init imx7ulp_init_late(void)
{
+ if (IS_ENABLED(CONFIG_ARM_IMX_CPUFREQ_DT))
+ platform_device_register_simple("imx-cpufreq-dt", -1, NULL, 0);
+
imx7ulp_cpuidle_init();
}
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
deleted file mode 100644
index 63f7f78..0000000
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ /dev/null
@@ -1,291 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * KZM-ARM11-01 support
- * Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org>
- *
- * based on code for MX31ADS,
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/smsc911x.h>
-#include <linux/types.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/memory.h>
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx31.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-
-#define KZM_ARM11_IO_ADDRESS(x) (IOMEM( \
- IMX_IO_P2V_MODULE(x, MX31_CS4) ?: \
- IMX_IO_P2V_MODULE(x, MX31_CS5)) ?: \
- MX31_IO_ADDRESS(x))
-
-/*
- * KZM-ARM11-01 Board Control Registers on FPGA
- */
-#define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000)
-#define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001)
-#define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002)
-#define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004)
-#define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008)
-#define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010)
-#define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020)
-#define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003)
-
-/*
- * External UART for touch panel on FPGA
- */
-#define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050)
-
-#if IS_ENABLED(CONFIG_SERIAL_8250)
-/*
- * KZM-ARM11-01 has an external UART on FPGA
- */
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .membase = KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
- .mapbase = KZM_ARM11_16550,
- /* irq number is run-time assigned */
- .irqflags = IRQ_TYPE_EDGE_RISING,
- .uartclk = 14745600,
- .regshift = 0,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_BUGGY_UART,
- },
- {},
-};
-
-static struct resource serial8250_resources[] = {
- {
- .start = KZM_ARM11_16550,
- .end = KZM_ARM11_16550 + 0x10,
- .flags = IORESOURCE_MEM,
- },
- {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
- .num_resources = ARRAY_SIZE(serial8250_resources),
- .resource = serial8250_resources,
-};
-
-static int __init kzm_init_ext_uart(void)
-{
- u8 tmp;
-
- /*
- * GPIO 1-1: external UART interrupt line
- */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO));
- gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int");
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
-
- /*
- * Unmask UART interrupt
- */
- tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
- tmp |= 0x2;
- __raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
-
- serial_platform_data[0].irq =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
- serial8250_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
- serial8250_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
-
- return platform_device_register(&serial_device);
-}
-#else
-static inline int kzm_init_ext_uart(void)
-{
- return 0;
-}
-#endif
-
-/*
- * SMSC LAN9118
- */
-#if IS_ENABLED(CONFIG_SMSC911X)
-static struct smsc911x_platform_config kzm_smsc9118_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static struct resource kzm_smsc9118_resources[] = {
- {
- .start = MX31_CS5_BASE_ADDR,
- .end = MX31_CS5_BASE_ADDR + SZ_128K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- },
-};
-
-static struct platform_device kzm_smsc9118_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(kzm_smsc9118_resources),
- .resource = kzm_smsc9118_resources,
- .dev = {
- .platform_data = &kzm_smsc9118_config,
- },
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-static int __init kzm_init_smsc9118(void)
-{
- /*
- * GPIO 1-2: SMSC9118 interrupt line
- */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO));
- gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int");
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- kzm_smsc9118_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
- kzm_smsc9118_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
-
- return platform_device_register(&kzm_smsc9118_device);
-}
-#else
-static inline int kzm_init_smsc9118(void)
-{
- return 0;
-}
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_IMX)
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static void __init kzm_init_imx_uart(void)
-{
- imx31_add_imx_uart0(&uart_pdata);
- imx31_add_imx_uart1(&uart_pdata);
-}
-#else
-static inline void kzm_init_imx_uart(void)
-{
-}
-#endif
-
-static int kzm_pins[] __initdata = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
- MX31_PIN_DCD_DCE1__DCD_DCE1,
- MX31_PIN_RI_DCE1__RI_DCE1,
- MX31_PIN_DSR_DCE1__DSR_DCE1,
- MX31_PIN_DTR_DCE1__DTR_DCE1,
- MX31_PIN_CTS2__CTS2,
- MX31_PIN_RTS2__RTS2,
- MX31_PIN_TXD2__TXD2,
- MX31_PIN_RXD2__RXD2,
- MX31_PIN_DCD_DTE1__DCD_DTE2,
- MX31_PIN_RI_DTE1__RI_DTE2,
- MX31_PIN_DSR_DTE1__DSR_DTE2,
- MX31_PIN_DTR_DTE1__DTR_DTE2,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init kzm_board_init(void)
-{
- imx31_soc_init();
-
- mxc_iomux_setup_multiple_pins(kzm_pins,
- ARRAY_SIZE(kzm_pins), "kzm");
- kzm_init_imx_uart();
-
- pr_info("Clock input source is 26MHz\n");
-}
-
-static void __init kzm_late_init(void)
-{
- kzm_init_ext_uart();
- kzm_init_smsc9118();
-}
-
-/*
- * This structure defines static mappings for the kzm-arm11-01 board.
- */
-static struct map_desc kzm_io_desc[] __initdata = {
- {
- .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
- .length = MX31_CS4_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = (unsigned long)MX31_CS5_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
- .length = MX31_CS5_SIZE,
- .type = MT_DEVICE
- },
-};
-
-/*
- * Set up static virtual mappings.
- */
-static void __init kzm_map_io(void)
-{
- mx31_map_io();
- iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc));
-}
-
-static void __init kzm_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
- .atag_offset = 0x100,
- .map_io = kzm_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = kzm_timer_init,
- .init_machine = kzm_board_init,
- .init_late = kzm_late_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
deleted file mode 100644
index ec011e8..0000000
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ /dev/null
@@ -1,338 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio/driver.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "devices-imx21.h"
-#include "hardware.h"
-#include "iomux-mx21.h"
-
-#define MX21ADS_CS8900A_REG (MX21_CS1_BASE_ADDR + 0x000000)
-#define MX21ADS_ST16C255_IOBASE_REG (MX21_CS1_BASE_ADDR + 0x200000)
-#define MX21ADS_VERSION_REG (MX21_CS1_BASE_ADDR + 0x400000)
-#define MX21ADS_IO_REG (MX21_CS1_BASE_ADDR + 0x800000)
-
-#define MX21ADS_MMC_CD IMX_GPIO_NR(4, 25)
-#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11)
-#define MX21ADS_MMGPIO_BASE (6 * 32)
-
-/* MX21ADS_IO_REG bit definitions */
-#define MX21ADS_IO_SD_WP (MX21ADS_MMGPIO_BASE + 0)
-#define MX21ADS_IO_TP6 (MX21ADS_IO_SD_WP)
-#define MX21ADS_IO_SW_SEL (MX21ADS_MMGPIO_BASE + 1)
-#define MX21ADS_IO_TP7 (MX21ADS_IO_SW_SEL)
-#define MX21ADS_IO_RESET_E_UART (MX21ADS_MMGPIO_BASE + 2)
-#define MX21ADS_IO_RESET_BASE (MX21ADS_MMGPIO_BASE + 3)
-#define MX21ADS_IO_CSI_CTL2 (MX21ADS_MMGPIO_BASE + 4)
-#define MX21ADS_IO_CSI_CTL1 (MX21ADS_MMGPIO_BASE + 5)
-#define MX21ADS_IO_CSI_CTL0 (MX21ADS_MMGPIO_BASE + 6)
-#define MX21ADS_IO_UART1_EN (MX21ADS_MMGPIO_BASE + 7)
-#define MX21ADS_IO_UART4_EN (MX21ADS_MMGPIO_BASE + 8)
-#define MX21ADS_IO_LCDON (MX21ADS_MMGPIO_BASE + 9)
-#define MX21ADS_IO_IRDA_EN (MX21ADS_MMGPIO_BASE + 10)
-#define MX21ADS_IO_IRDA_FIR_SEL (MX21ADS_MMGPIO_BASE + 11)
-#define MX21ADS_IO_IRDA_MD0_B (MX21ADS_MMGPIO_BASE + 12)
-#define MX21ADS_IO_IRDA_MD1 (MX21ADS_MMGPIO_BASE + 13)
-#define MX21ADS_IO_LED4_ON (MX21ADS_MMGPIO_BASE + 14)
-#define MX21ADS_IO_LED3_ON (MX21ADS_MMGPIO_BASE + 15)
-
-static const int mx21ads_pins[] __initconst = {
-
- /* CS8900A */
- (GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
-
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
-
- /* UART3 (IrDA) - only TXD and RXD */
- PE8_PF_UART3_TXD,
- PE9_PF_UART3_RXD,
-
- /* UART4 */
- PB26_AF_UART4_RTS,
- PB28_AF_UART4_TXD,
- PB29_AF_UART4_CTS,
- PB31_AF_UART4_RXD,
-
- /* LCDC */
- PA5_PF_LSCLK,
- PA6_PF_LD0,
- PA7_PF_LD1,
- PA8_PF_LD2,
- PA9_PF_LD3,
- PA10_PF_LD4,
- PA11_PF_LD5,
- PA12_PF_LD6,
- PA13_PF_LD7,
- PA14_PF_LD8,
- PA15_PF_LD9,
- PA16_PF_LD10,
- PA17_PF_LD11,
- PA18_PF_LD12,
- PA19_PF_LD13,
- PA20_PF_LD14,
- PA21_PF_LD15,
- PA22_PF_LD16,
- PA24_PF_REV, /* Sharp panel dedicated signal */
- PA25_PF_CLS, /* Sharp panel dedicated signal */
- PA26_PF_PS, /* Sharp panel dedicated signal */
- PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */
- PA28_PF_HSYNC,
- PA29_PF_VSYNC,
- PA30_PF_CONTRAST,
- PA31_PF_OE_ACD,
-
- /* MMC/SDHC */
- PE18_PF_SD1_D0,
- PE19_PF_SD1_D1,
- PE20_PF_SD1_D2,
- PE21_PF_SD1_D3,
- PE22_PF_SD1_CMD,
- PE23_PF_SD1_CLK,
-
- /* NFC */
- PF0_PF_NRFB,
- PF1_PF_NFCE,
- PF2_PF_NFWP,
- PF3_PF_NFCLE,
- PF4_PF_NFALE,
- PF5_PF_NFRE,
- PF6_PF_NFWE,
- PF7_PF_NFIO0,
- PF8_PF_NFIO1,
- PF9_PF_NFIO2,
- PF10_PF_NFIO3,
- PF11_PF_NFIO4,
- PF12_PF_NFIO5,
- PF13_PF_NFIO6,
- PF14_PF_NFIO7,
-};
-
-/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */
-static struct physmap_flash_data mx21ads_flash_data = {
- .width = 4,
-};
-
-static struct resource mx21ads_flash_resource =
- DEFINE_RES_MEM(MX21_CS0_BASE_ADDR, SZ_32M);
-
-static struct platform_device mx21ads_nor_mtd_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &mx21ads_flash_data,
- },
- .num_resources = 1,
- .resource = &mx21ads_flash_resource,
-};
-
-static struct resource mx21ads_cs8900_resources[] __initdata = {
- DEFINE_RES_MEM(MX21ADS_CS8900A_REG, SZ_1K),
- /* irq number is run-time assigned */
- DEFINE_RES_IRQ(-1),
-};
-
-static const struct platform_device_info mx21ads_cs8900_devinfo __initconst = {
- .name = "cs89x0",
- .id = 0,
- .res = mx21ads_cs8900_resources,
- .num_res = ARRAY_SIZE(mx21ads_cs8900_resources),
-};
-
-static const struct imxuart_platform_data uart_pdata_rts __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxuart_platform_data uart_pdata_norts __initconst = {
-};
-
-static struct resource mx21ads_mmgpio_resource =
- DEFINE_RES_MEM_NAMED(MX21ADS_IO_REG, SZ_2, "dat");
-
-static struct bgpio_pdata mx21ads_mmgpio_pdata = {
- .label = "mx21ads-mmgpio",
- .base = MX21ADS_MMGPIO_BASE,
- .ngpio = 16,
-};
-
-static struct platform_device mx21ads_mmgpio = {
- .name = "basic-mmio-gpio",
- .id = PLATFORM_DEVID_AUTO,
- .resource = &mx21ads_mmgpio_resource,
- .num_resources = 1,
- .dev = {
- .platform_data = &mx21ads_mmgpio_pdata,
- },
-};
-
-static struct regulator_consumer_supply mx21ads_lcd_regulator_consumer =
- REGULATOR_SUPPLY("lcd", "imx-fb.0");
-
-static struct regulator_init_data mx21ads_lcd_regulator_init_data = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .consumer_supplies = &mx21ads_lcd_regulator_consumer,
- .num_consumer_supplies = 1,
-};
-
-static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = {
- .supply_name = "LCD",
- .microvolts = 3300000,
- .init_data = &mx21ads_lcd_regulator_init_data,
-};
-
-static struct platform_device mx21ads_lcd_regulator = {
- .name = "reg-fixed-voltage",
- .id = PLATFORM_DEVID_AUTO,
- .dev = {
- .platform_data = &mx21ads_lcd_regulator_pdata,
- },
-};
-
-static struct gpiod_lookup_table mx21ads_lcd_regulator_gpiod_table = {
- .dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */
- .table = {
- GPIO_LOOKUP("mx21ads-mmgpio", 9, NULL, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-/*
- * Connected is a portrait Sharp-QVGA display
- * of type: LQ035Q7DB02
- */
-static struct imx_fb_videomode mx21ads_modes[] = {
- {
- .mode = {
- .name = "Sharp-LQ035Q7",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 188679, /* in ps (5.3MHz) */
- .hsync_len = 2,
- .left_margin = 6,
- .right_margin = 16,
- .vsync_len = 1,
- .upper_margin = 8,
- .lower_margin = 10,
- },
- .pcr = 0xfb108bc7,
- .bpp = 16,
- },
-};
-
-static const struct imx_fb_platform_data mx21ads_fb_data __initconst = {
- .mode = mx21ads_modes,
- .num_modes = ARRAY_SIZE(mx21ads_modes),
-
- .pwmr = 0x00a903ff,
- .lscr1 = 0x00120300,
- .dmacr = 0x00020008,
-};
-
-static int mx21ads_sdhc_get_ro(struct device *dev)
-{
- return gpio_get_value(MX21ADS_IO_SD_WP);
-}
-
-static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- int ret;
-
- ret = gpio_request(MX21ADS_IO_SD_WP, "mmc-ro");
- if (ret)
- return ret;
-
- return request_irq(gpio_to_irq(MX21ADS_MMC_CD), detect_irq,
- IRQF_TRIGGER_FALLING, "mmc-detect", data);
-}
-
-static void mx21ads_sdhc_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(MX21ADS_MMC_CD), data);
- gpio_free(MX21ADS_IO_SD_WP);
-}
-
-static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = {
- .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
- .get_ro = mx21ads_sdhc_get_ro,
- .init = mx21ads_sdhc_init,
- .exit = mx21ads_sdhc_exit,
-};
-
-static const struct mxc_nand_platform_data
-mx21ads_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &mx21ads_mmgpio,
- &mx21ads_lcd_regulator,
- &mx21ads_nor_mtd_device,
-};
-
-static void __init mx21ads_board_init(void)
-{
- imx21_soc_init();
-
- mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
- "mx21ads");
-
- imx21_add_imx_uart0(&uart_pdata_rts);
- imx21_add_imx_uart2(&uart_pdata_norts);
- imx21_add_imx_uart3(&uart_pdata_rts);
- imx21_add_mxc_nand(&mx21ads_nand_board_info);
-
- imx21_add_imx_fb(&mx21ads_fb_data);
-}
-
-static void __init mx21ads_late_init(void)
-{
- imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
-
- gpiod_add_lookup_table(&mx21ads_lcd_regulator_gpiod_table);
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
- mx21ads_cs8900_resources[1].start =
- gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
- mx21ads_cs8900_resources[1].end =
- gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
- platform_device_register_full(&mx21ads_cs8900_devinfo);
-}
-
-static void __init mx21ads_timer_init(void)
-{
- mx21_clocks_init(32768, 26000000);
-}
-
-MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
- /* maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx21_map_io,
- .init_early = imx21_init_early,
- .init_irq = mx21_init_irq,
- .init_time = mx21ads_timer_init,
- .init_machine = mx21ads_board_init,
- .init_late = mx21ads_late_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
deleted file mode 100644
index 2db4475..0000000
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ /dev/null
@@ -1,470 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-
-/*
- * This machine is known as:
- * - i.MX27 3-Stack Development System
- * - i.MX27 Platform Development Kit (i.MX27 PDK)
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/irq.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/delay.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "3ds_debugboard.h"
-#include "common.h"
-#include "devices-imx27.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-#include "ulpi.h"
-
-#define SD1_EN_GPIO IMX_GPIO_NR(2, 25)
-#define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23)
-#define SPI2_SS0 IMX_GPIO_NR(4, 21)
-#define PMIC_INT IMX_GPIO_NR(3, 14)
-#define SPI1_SS0 IMX_GPIO_NR(4, 28)
-#define SD1_CD IMX_GPIO_NR(2, 26)
-#define LCD_RESET IMX_GPIO_NR(1, 3)
-#define LCD_ENABLE IMX_GPIO_NR(1, 31)
-
-static const int mx27pdk_pins[] __initconst = {
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
- /* SDHC1 */
- PE18_PF_SD1_D0,
- PE19_PF_SD1_D1,
- PE20_PF_SD1_D2,
- PE21_PF_SD1_D3,
- PE22_PF_SD1_CMD,
- PE23_PF_SD1_CLK,
- SD1_EN_GPIO | GPIO_GPIO | GPIO_OUT,
- /* OTG */
- OTG_PHY_RESET_GPIO | GPIO_GPIO | GPIO_OUT,
- PC7_PF_USBOTG_DATA5,
- PC8_PF_USBOTG_DATA6,
- PC9_PF_USBOTG_DATA0,
- PC10_PF_USBOTG_DATA2,
- PC11_PF_USBOTG_DATA1,
- PC12_PF_USBOTG_DATA4,
- PC13_PF_USBOTG_DATA3,
- PE0_PF_USBOTG_NXT,
- PE1_PF_USBOTG_STP,
- PE2_PF_USBOTG_DIR,
- PE24_PF_USBOTG_CLK,
- PE25_PF_USBOTG_DATA7,
- /* CSPI1 */
- PD31_PF_CSPI1_MOSI,
- PD30_PF_CSPI1_MISO,
- PD29_PF_CSPI1_SCLK,
- PD25_PF_CSPI1_RDY,
- SPI1_SS0 | GPIO_GPIO | GPIO_OUT,
- /* CSPI2 */
- PD22_PF_CSPI2_SCLK,
- PD23_PF_CSPI2_MISO,
- PD24_PF_CSPI2_MOSI,
- SPI2_SS0 | GPIO_GPIO | GPIO_OUT,
- /* I2C1 */
- PD17_PF_I2C_DATA,
- PD18_PF_I2C_CLK,
- /* PMIC INT */
- PMIC_INT | GPIO_GPIO | GPIO_IN,
- /* LCD */
- PA5_PF_LSCLK,
- PA6_PF_LD0,
- PA7_PF_LD1,
- PA8_PF_LD2,
- PA9_PF_LD3,
- PA10_PF_LD4,
- PA11_PF_LD5,
- PA12_PF_LD6,
- PA13_PF_LD7,
- PA14_PF_LD8,
- PA15_PF_LD9,
- PA16_PF_LD10,
- PA17_PF_LD11,
- PA18_PF_LD12,
- PA19_PF_LD13,
- PA20_PF_LD14,
- PA21_PF_LD15,
- PA22_PF_LD16,
- PA23_PF_LD17,
- PA28_PF_HSYNC,
- PA29_PF_VSYNC,
- PA30_PF_CONTRAST,
- LCD_ENABLE | GPIO_GPIO | GPIO_OUT,
- LCD_RESET | GPIO_GPIO | GPIO_OUT,
- /* SSI4 */
- PC16_PF_SSI4_FS,
- PC17_PF_SSI4_RXD,
- PC18_PF_SSI4_TXD,
- PC19_PF_SSI4_CLK,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-/*
- * Matrix keyboard
- */
-
-static const uint32_t mx27_3ds_keymap[] = {
- KEY(0, 0, KEY_UP),
- KEY(0, 1, KEY_DOWN),
- KEY(1, 0, KEY_RIGHT),
- KEY(1, 1, KEY_LEFT),
- KEY(1, 2, KEY_ENTER),
- KEY(2, 0, KEY_F6),
- KEY(2, 1, KEY_F8),
- KEY(2, 2, KEY_F9),
- KEY(2, 3, KEY_F10),
-};
-
-static const struct matrix_keymap_data mx27_3ds_keymap_data __initconst = {
- .keymap = mx27_3ds_keymap,
- .keymap_size = ARRAY_SIZE(mx27_3ds_keymap),
-};
-
-static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- return request_irq(gpio_to_irq(SD1_CD), detect_irq,
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
-}
-
-static void mx27_3ds_sdhc1_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(SD1_CD), data);
-}
-
-static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
- .init = mx27_3ds_sdhc1_init,
- .exit = mx27_3ds_sdhc1_exit,
-};
-
-static void mx27_3ds_sdhc1_enable_level_translator(void)
-{
- /* Turn on TXB0108 OE pin */
- gpio_request(SD1_EN_GPIO, "sd1_enable");
- gpio_direction_output(SD1_EN_GPIO, 1);
-}
-
-
-static int otg_phy_init(void)
-{
- gpio_request(OTG_PHY_RESET_GPIO, "usb-otg-reset");
- gpio_direction_output(OTG_PHY_RESET_GPIO, 0);
- mdelay(1);
- gpio_set_value(OTG_PHY_RESET_GPIO, 1);
- return 0;
-}
-
-static int mx27_3ds_otg_init(struct platform_device *pdev)
-{
- return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
- .init = mx27_3ds_otg_init,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init mx27_3ds_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", mx27_3ds_otg_mode);
-
-/* Regulators */
-static struct regulator_init_data gpo_init = {
- .constraints = {
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_consumer_supply vmmc1_consumers[] = {
- REGULATOR_SUPPLY("vcore", "spi0.0"),
-};
-
-static struct regulator_init_data vmmc1_init = {
- .constraints = {
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
- .consumer_supplies = vmmc1_consumers,
-};
-
-static struct regulator_consumer_supply vgen_consumers[] = {
- REGULATOR_SUPPLY("vdd", "spi0.0"),
-};
-
-static struct regulator_init_data vgen_init = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(vgen_consumers),
- .consumer_supplies = vgen_consumers,
-};
-
-static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
- {
- .id = MC13783_REG_VMMC1,
- .init_data = &vmmc1_init,
- }, {
- .id = MC13783_REG_VGEN,
- .init_data = &vgen_init,
- }, {
- .id = MC13783_REG_GPO1, /* Turn on 1.8V */
- .init_data = &gpo_init,
- }, {
- .id = MC13783_REG_GPO3, /* Turn on 3.3V */
- .init_data = &gpo_init,
- },
-};
-
-/* MC13783 */
-static struct mc13xxx_codec_platform_data mx27_3ds_codec = {
- .dac_ssi_port = MC13783_SSI1_PORT,
- .adc_ssi_port = MC13783_SSI1_PORT,
-};
-
-static struct mc13xxx_platform_data mc13783_pdata = {
- .regulators = {
- .regulators = mx27_3ds_regulators,
- .num_regulators = ARRAY_SIZE(mx27_3ds_regulators),
-
- },
- .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC |
- MC13XXX_USE_CODEC,
- .codec = &mx27_3ds_codec,
-};
-
-static struct imx_ssi_platform_data mx27_3ds_ssi_pdata = {
- .flags = IMX_SSI_DMA | IMX_SSI_NET,
-};
-
-/* SPI */
-static struct gpiod_lookup_table mx27_spi1_gpiod_table = {
- .dev_id = "imx27-cspi.0", /* Actual device name for spi1 */
- .table = {
- /*
- * The i.MX27 has the i.MX21 GPIO controller, the SPI1 CS GPIO
- * SPI1_SS0 is numbered IMX_GPIO_NR(4, 28).
- *
- * This is in "bank 4" which is subtracted by one in the macro
- * so this is actually bank 3 on "imx21-gpio.3".
- */
- GPIO_LOOKUP_IDX("imx21-gpio.3", 28, "cs", 0, GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct gpiod_lookup_table mx27_spi2_gpiod_table = {
- .dev_id = "imx27-cspi.1", /* Actual device name for spi2 */
- .table = {
- /*
- * The i.MX27 has the i.MX21 GPIO controller, the SPI2 CS GPIO
- * SPI2_SS0 is numbered IMX_GPIO_NR(4, 21).
- *
- * This is in "bank 4" which is subtracted by one in the macro
- * so this is actually bank 3 on "imx21-gpio.3".
- */
- GPIO_LOOKUP_IDX("imx21-gpio.3", 21, "cs", 0, GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct imx_fb_videomode mx27_3ds_modes[] = {
- { /* 480x640 @ 60 Hz */
- .mode = {
- .name = "Epson-VGA",
- .refresh = 60,
- .xres = 480,
- .yres = 640,
- .pixclock = 41701,
- .left_margin = 20,
- .right_margin = 41,
- .upper_margin = 10,
- .lower_margin = 5,
- .hsync_len = 20,
- .vsync_len = 10,
- .sync = FB_SYNC_OE_ACT_HIGH |
- FB_SYNC_CLK_INVERT,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
- .bpp = 16,
- .pcr = 0xFAC08B82,
- },
-};
-
-static const struct imx_fb_platform_data mx27_3ds_fb_data __initconst = {
- .mode = mx27_3ds_modes,
- .num_modes = ARRAY_SIZE(mx27_3ds_modes),
- .pwmr = 0x00A903FF,
- .lscr1 = 0x00120300,
- .dmacr = 0x00020010,
-};
-
-/* LCD */
-static struct gpiod_lookup_table mx27_3ds_lcd_gpiod_table = {
- .dev_id = "spi0.0", /* Bus 0 chipselect 0 */
- .table = {
- /*
- * The i.MX27 has the i.MX21 GPIO controller, the GPIOs
- * numbered IMX_GPIO_NR(1, 3) and IMX_GPIO_NR(1, 31)
- * are in "bank 1" which is subtracted by one in the macro
- * so these are actually bank 0 on "imx21-gpio.0".
- */
- GPIO_LOOKUP("imx21-gpio.0", 3, "reset", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("imx21-gpio.0", 31, "enable", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
- {
- .modalias = "mc13783",
- .max_speed_hz = 1000000,
- .bus_num = 1,
- .chip_select = 0, /* SS0 */
- .platform_data = &mc13783_pdata,
- /* irq number is run-time assigned */
- .mode = SPI_CS_HIGH,
- }, {
- .modalias = "l4f00242t03",
- .max_speed_hz = 5000000,
- .bus_num = 0,
- .chip_select = 0, /* SS0 */
- },
-};
-
-static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
- .bitrate = 100000,
-};
-
-static void __init mx27pdk_init(void)
-{
- imx27_soc_init();
-
- mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
- "mx27pdk");
- imx27_add_imx_uart0(&uart_pdata);
- imx27_add_fec(NULL);
- imx27_add_imx_keypad(&mx27_3ds_keymap_data);
- imx27_add_imx2_wdt();
-
- imx27_add_spi_imx1(&mx27_spi2_gpiod_table);
- imx27_add_spi_imx0(&mx27_spi1_gpiod_table);
-
- imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
- imx27_add_imx_fb(&mx27_3ds_fb_data);
-
- imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
-}
-
-static void __init mx27pdk_late_init(void)
-{
- mx27_3ds_sdhc1_enable_level_translator();
- imx27_add_mxc_mmc(0, &sdhc1_pdata);
-
- otg_phy_init();
-
- if (otg_mode_host) {
- otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
-
- if (otg_pdata.otg)
- imx27_add_mxc_ehci_otg(&otg_pdata);
- }
-
- if (!otg_mode_host)
- imx27_add_fsl_usb2_udc(&otg_device_pdata);
-
- gpiod_add_lookup_table(&mx27_3ds_lcd_gpiod_table);
- mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT);
- spi_register_board_info(mx27_3ds_spi_devs,
- ARRAY_SIZE(mx27_3ds_spi_devs));
-
- if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28)))
- pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
-
-
- imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
-}
-
-static void __init mx27pdk_timer_init(void)
-{
- mx27_clocks_init(26000000);
-}
-
-MACHINE_START(MX27_3DS, "Freescale MX27PDK")
- /* maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx27_map_io,
- .init_early = imx27_init_early,
- .init_irq = mx27_init_irq,
- .init_time = mx27pdk_timer_init,
- .init_machine = mx27pdk_init,
- .init_late = mx27pdk_late_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
deleted file mode 100644
index ba202f9..0000000
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ /dev/null
@@ -1,407 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-#include <linux/gpio/driver.h>
-/* Needed for gpio_to_irq() */
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-
-/*
- * Base address of PBC controller, CS4
- */
-#define PBC_BASE_ADDRESS 0xf4300000
-#define PBC_REG_ADDR(offset) (void __force __iomem *) \
- (PBC_BASE_ADDRESS + (offset))
-
-/* When the PBC address connection is fixed in h/w, defined as 1 */
-#define PBC_ADDR_SH 0
-
-/* Offsets for the PBC Controller register */
-/*
- * PBC Board version register offset
- */
-#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 set address.
- */
-#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 clear address.
- */
-#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
-
-/* PBC Board Control Register 1 bit definitions */
-#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */
-
-/* to determine the correct external crystal reference */
-#define CKIH_27MHZ_BIT_SET (1 << 3)
-
-static const int mx27ads_pins[] __initconst = {
- /* UART0 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* UART1 */
- PE3_PF_UART2_CTS,
- PE4_PF_UART2_RTS,
- PE6_PF_UART2_TXD,
- PE7_PF_UART2_RXD,
- /* UART2 */
- PE8_PF_UART3_TXD,
- PE9_PF_UART3_RXD,
- PE10_PF_UART3_CTS,
- PE11_PF_UART3_RTS,
- /* UART3 */
- PB26_AF_UART4_RTS,
- PB28_AF_UART4_TXD,
- PB29_AF_UART4_CTS,
- PB31_AF_UART4_RXD,
- /* UART4 */
- PB18_AF_UART5_TXD,
- PB19_AF_UART5_RXD,
- PB20_AF_UART5_CTS,
- PB21_AF_UART5_RTS,
- /* UART5 */
- PB10_AF_UART6_TXD,
- PB12_AF_UART6_CTS,
- PB11_AF_UART6_RXD,
- PB13_AF_UART6_RTS,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
- /* I2C2 */
- PC5_PF_I2C2_SDA,
- PC6_PF_I2C2_SCL,
- /* FB */
- PA5_PF_LSCLK,
- PA6_PF_LD0,
- PA7_PF_LD1,
- PA8_PF_LD2,
- PA9_PF_LD3,
- PA10_PF_LD4,
- PA11_PF_LD5,
- PA12_PF_LD6,
- PA13_PF_LD7,
- PA14_PF_LD8,
- PA15_PF_LD9,
- PA16_PF_LD10,
- PA17_PF_LD11,
- PA18_PF_LD12,
- PA19_PF_LD13,
- PA20_PF_LD14,
- PA21_PF_LD15,
- PA22_PF_LD16,
- PA23_PF_LD17,
- PA24_PF_REV,
- PA25_PF_CLS,
- PA26_PF_PS,
- PA27_PF_SPL_SPR,
- PA28_PF_HSYNC,
- PA29_PF_VSYNC,
- PA30_PF_CONTRAST,
- PA31_PF_OE_ACD,
- /* OWIRE */
- PE16_AF_OWIRE,
- /* SDHC1*/
- PE18_PF_SD1_D0,
- PE19_PF_SD1_D1,
- PE20_PF_SD1_D2,
- PE21_PF_SD1_D3,
- PE22_PF_SD1_CMD,
- PE23_PF_SD1_CLK,
- /* SDHC2*/
- PB4_PF_SD2_D0,
- PB5_PF_SD2_D1,
- PB6_PF_SD2_D2,
- PB7_PF_SD2_D3,
- PB8_PF_SD2_CMD,
- PB9_PF_SD2_CLK,
-};
-
-static const struct mxc_nand_platform_data
-mx27ads_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-/* ADS's NOR flash */
-static struct physmap_flash_data mx27ads_flash_data = {
- .width = 2,
-};
-
-static struct resource mx27ads_flash_resource = {
- .start = 0xc0000000,
- .end = 0xc0000000 + 0x02000000 - 1,
- .flags = IORESOURCE_MEM,
-
-};
-
-static struct platform_device mx27ads_nor_mtd_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &mx27ads_flash_data,
- },
- .num_resources = 1,
- .resource = &mx27ads_flash_resource,
-};
-
-static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = {
- .bitrate = 100000,
-};
-
-static struct i2c_board_info mx27ads_i2c_devices[] = {
-};
-
-static void vgpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- if (value)
- imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
- else
- imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
-}
-
-static int vgpio_dir_out(struct gpio_chip *chip, unsigned offset, int value)
-{
- return 0;
-}
-
-#define MX27ADS_LCD_GPIO (6 * 32)
-
-static struct regulator_consumer_supply mx27ads_lcd_regulator_consumer =
- REGULATOR_SUPPLY("lcd", "imx-fb.0");
-
-static struct regulator_init_data mx27ads_lcd_regulator_init_data = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
-},
- .consumer_supplies = &mx27ads_lcd_regulator_consumer,
- .num_consumer_supplies = 1,
-};
-
-static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = {
- .supply_name = "LCD",
- .microvolts = 3300000,
- .init_data = &mx27ads_lcd_regulator_init_data,
-};
-
-static struct gpiod_lookup_table mx27ads_lcd_regulator_gpiod_table = {
- .dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */
- .table = {
- GPIO_LOOKUP("LCD", 0, NULL, GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static void __init mx27ads_regulator_init(void)
-{
- struct gpio_chip *vchip;
-
- vchip = kzalloc(sizeof(*vchip), GFP_KERNEL);
- vchip->owner = THIS_MODULE;
- vchip->label = "LCD";
- vchip->base = MX27ADS_LCD_GPIO;
- vchip->ngpio = 1;
- vchip->direction_output = vgpio_dir_out;
- vchip->set = vgpio_set;
- gpiochip_add_data(vchip, NULL);
-
- gpiod_add_lookup_table(&mx27ads_lcd_regulator_gpiod_table);
-
- platform_device_register_data(NULL, "reg-fixed-voltage",
- PLATFORM_DEVID_AUTO,
- &mx27ads_lcd_regulator_pdata,
- sizeof(mx27ads_lcd_regulator_pdata));
-}
-
-static struct imx_fb_videomode mx27ads_modes[] = {
- {
- .mode = {
- .name = "Sharp-LQ035Q7",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 188679, /* in ps (5.3MHz) */
- .hsync_len = 1,
- .left_margin = 9,
- .right_margin = 16,
- .vsync_len = 1,
- .upper_margin = 7,
- .lower_margin = 9,
- },
- .bpp = 16,
- .pcr = 0xFB008BC0,
- },
-};
-
-static const struct imx_fb_platform_data mx27ads_fb_data __initconst = {
- .mode = mx27ads_modes,
- .num_modes = ARRAY_SIZE(mx27ads_modes),
-
- /*
- * - HSYNC active high
- * - VSYNC active high
- * - clk notenabled while idle
- * - clock inverted
- * - data not inverted
- * - data enable low active
- * - enable sharp mode
- */
- .pwmr = 0x00A903FF,
- .lscr1 = 0x00120300,
- .dmacr = 0x00020010,
-};
-
-static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- return request_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), detect_irq,
- IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
-}
-
-static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- return request_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), detect_irq,
- IRQF_TRIGGER_RISING, "sdhc2-card-detect", data);
-}
-
-static void mx27ads_sdhc1_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), data);
-}
-
-static void mx27ads_sdhc2_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), data);
-}
-
-static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
- .init = mx27ads_sdhc1_init,
- .exit = mx27ads_sdhc1_exit,
-};
-
-static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
- .init = mx27ads_sdhc2_init,
- .exit = mx27ads_sdhc2_exit,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &mx27ads_nor_mtd_device,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static void __init mx27ads_board_init(void)
-{
- imx27_soc_init();
-
- mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
- "mx27ads");
-
- imx27_add_imx_uart0(&uart_pdata);
- imx27_add_imx_uart1(&uart_pdata);
- imx27_add_imx_uart2(&uart_pdata);
- imx27_add_imx_uart3(&uart_pdata);
- imx27_add_imx_uart4(&uart_pdata);
- imx27_add_imx_uart5(&uart_pdata);
- imx27_add_mxc_nand(&mx27ads_nand_board_info);
-
- /* only the i2c master 1 is used on this CPU card */
- i2c_register_board_info(1, mx27ads_i2c_devices,
- ARRAY_SIZE(mx27ads_i2c_devices));
- imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
- imx27_add_imx_fb(&mx27ads_fb_data);
-
- imx27_add_fec(NULL);
- imx27_add_mxc_w1();
-}
-
-static void __init mx27ads_late_init(void)
-{
- mx27ads_regulator_init();
-
- imx27_add_mxc_mmc(0, &sdhc1_pdata);
- imx27_add_mxc_mmc(1, &sdhc2_pdata);
-
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init mx27ads_timer_init(void)
-{
- unsigned long fref = 26000000;
-
- if ((imx_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
- fref = 27000000;
-
- mx27_clocks_init(fref);
-}
-
-static struct map_desc mx27ads_io_desc[] __initdata = {
- {
- .virtual = PBC_BASE_ADDRESS,
- .pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
- .length = SZ_1M,
- .type = MT_DEVICE,
- },
-};
-
-static void __init mx27ads_map_io(void)
-{
- mx27_map_io();
- iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
-}
-
-MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
- /* maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx27ads_map_io,
- .init_early = imx27_init_early,
- .init_irq = mx27_init_irq,
- .init_time = mx27ads_timer_init,
- .init_machine = mx27ads_board_init,
- .init_late = mx27ads_late_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
deleted file mode 100644
index 23e63d3..0000000
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ /dev/null
@@ -1,615 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/regulator/machine.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-
-#include "3ds_debugboard.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-#include "ulpi.h"
-
-static int mx31_3ds_pins[] = {
- /* UART1 */
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
- IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
- /*SPI0*/
- IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_ALT1),
- IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_ALT1),
- /* SPI 1 */
- MX31_PIN_CSPI2_SCLK__SCLK,
- MX31_PIN_CSPI2_MOSI__MOSI,
- MX31_PIN_CSPI2_MISO__MISO,
- MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI2_SS0__SS0,
- MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */
- /* MC13783 IRQ */
- IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO),
- /* USB OTG reset */
- IOMUX_MODE(MX31_PIN_USB_PWR, IOMUX_CONFIG_GPIO),
- /* USB OTG */
- MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
- MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
- MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
- MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
- MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
- MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
- MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
- MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
- MX31_PIN_USBOTG_CLK__USBOTG_CLK,
- MX31_PIN_USBOTG_DIR__USBOTG_DIR,
- MX31_PIN_USBOTG_NXT__USBOTG_NXT,
- MX31_PIN_USBOTG_STP__USBOTG_STP,
- /*Keyboard*/
- MX31_PIN_KEY_ROW0_KEY_ROW0,
- MX31_PIN_KEY_ROW1_KEY_ROW1,
- MX31_PIN_KEY_ROW2_KEY_ROW2,
- MX31_PIN_KEY_COL0_KEY_COL0,
- MX31_PIN_KEY_COL1_KEY_COL1,
- MX31_PIN_KEY_COL2_KEY_COL2,
- MX31_PIN_KEY_COL3_KEY_COL3,
- /* USB Host 2 */
- IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT1),
- IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT1),
- IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT1),
- IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT1),
- IOMUX_MODE(MX31_PIN_IOIS16, IOMUX_CONFIG_ALT1),
- IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1),
- /* USB Host2 reset */
- IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO),
- /* I2C1 */
- MX31_PIN_I2C_CLK__I2C1_SCL,
- MX31_PIN_I2C_DAT__I2C1_SDA,
- /* SDHC1 */
- MX31_PIN_SD1_DATA3__SD1_DATA3,
- MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA1__SD1_DATA1,
- MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_CLK__SD1_CLK,
- MX31_PIN_SD1_CMD__SD1_CMD,
- MX31_PIN_GPIO3_1__GPIO3_1, /* Card detect */
- MX31_PIN_GPIO3_0__GPIO3_0, /* OE */
- /* Framebuffer */
- MX31_PIN_LD0__LD0,
- MX31_PIN_LD1__LD1,
- MX31_PIN_LD2__LD2,
- MX31_PIN_LD3__LD3,
- MX31_PIN_LD4__LD4,
- MX31_PIN_LD5__LD5,
- MX31_PIN_LD6__LD6,
- MX31_PIN_LD7__LD7,
- MX31_PIN_LD8__LD8,
- MX31_PIN_LD9__LD9,
- MX31_PIN_LD10__LD10,
- MX31_PIN_LD11__LD11,
- MX31_PIN_LD12__LD12,
- MX31_PIN_LD13__LD13,
- MX31_PIN_LD14__LD14,
- MX31_PIN_LD15__LD15,
- MX31_PIN_LD16__LD16,
- MX31_PIN_LD17__LD17,
- MX31_PIN_VSYNC3__VSYNC3,
- MX31_PIN_HSYNC__HSYNC,
- MX31_PIN_FPSHIFT__FPSHIFT,
- MX31_PIN_CONTRAST__CONTRAST,
- /* SSI */
- MX31_PIN_STXD4__STXD4,
- MX31_PIN_SRXD4__SRXD4,
- MX31_PIN_SCK4__SCK4,
- MX31_PIN_SFS4__SFS4,
-};
-
-/*
- * FB support
- */
-static const struct fb_videomode fb_modedb[] = {
- { /* 480x640 @ 60 Hz */
- .name = "Epson-VGA",
- .refresh = 60,
- .xres = 480,
- .yres = 640,
- .pixclock = 41701,
- .left_margin = 20,
- .right_margin = 41,
- .upper_margin = 10,
- .lower_margin = 5,
- .hsync_len = 20,
- .vsync_len = 10,
- .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
- .name = "Epson-VGA",
- .mode = fb_modedb,
- .num_modes = ARRAY_SIZE(fb_modedb),
-};
-
-/* LCD */
-static struct gpiod_lookup_table mx31_3ds_lcd_gpiod_table = {
- .dev_id = "spi0.2", /* Bus 0 chipselect 2 */
- .table = {
- /*
- * "reset" has IOMUX_TO_GPIO(IOMUX_PIN(88, 28)).
- * The macro only shifts 88 to bits 9..16 and then
- * mask it and shift it back. The GPIO number is 88.
- * 88 is 2*32+24
- */
- GPIO_LOOKUP("imx31-gpio.2", 24, "reset", GPIO_ACTIVE_HIGH),
- /*
- * Same reasoning as above for
- * IOMUX_TO_GPIO(IOMUX_PIN(89, 27), pin 89 is 2*32+25.
- */
- GPIO_LOOKUP("imx31-gpio.2", 25, "enable", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-/*
- * Support for SD card slot in personality board
- */
-#define MX31_3DS_GPIO_SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
-#define MX31_3DS_GPIO_SDHC1_BE IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
-
-static struct gpio mx31_3ds_sdhc1_gpios[] = {
- { MX31_3DS_GPIO_SDHC1_CD, GPIOF_IN, "sdhc1-card-detect" },
- { MX31_3DS_GPIO_SDHC1_BE, GPIOF_OUT_INIT_LOW, "sdhc1-bus-en" },
-};
-
-static int mx31_3ds_sdhc1_init(struct device *dev,
- irq_handler_t detect_irq,
- void *data)
-{
- int ret;
-
- ret = gpio_request_array(mx31_3ds_sdhc1_gpios,
- ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
- if (ret) {
- pr_warn("Unable to request the SD/MMC GPIOs.\n");
- return ret;
- }
-
- ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)),
- detect_irq,
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- "sdhc1-detect", data);
- if (ret) {
- pr_warn("Unable to request the SD/MMC card-detect IRQ.\n");
- goto gpio_free;
- }
-
- return 0;
-
-gpio_free:
- gpio_free_array(mx31_3ds_sdhc1_gpios,
- ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
- return ret;
-}
-
-static void mx31_3ds_sdhc1_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), data);
- gpio_free_array(mx31_3ds_sdhc1_gpios,
- ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
-}
-
-static void mx31_3ds_sdhc1_setpower(struct device *dev, unsigned int vdd)
-{
- /*
- * While the voltage stuff is done by the driver, activate the
- * Buffer Enable Pin only if there is a card in slot to fix the card
- * voltage issue caused by bi-directional chip TXB0108 on 3Stack.
- * Done here because at this stage we have for sure a debounced value
- * of the presence of the card, showed by the value of vdd.
- * 7 == ilog2(MMC_VDD_165_195)
- */
- if (vdd > 7)
- gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 1);
- else
- gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 0);
-}
-
-static struct imxmmc_platform_data sdhc1_pdata = {
- .init = mx31_3ds_sdhc1_init,
- .exit = mx31_3ds_sdhc1_exit,
- .setpower = mx31_3ds_sdhc1_setpower,
-};
-
-/*
- * Matrix keyboard
- */
-
-static const uint32_t mx31_3ds_keymap[] = {
- KEY(0, 0, KEY_UP),
- KEY(0, 1, KEY_DOWN),
- KEY(1, 0, KEY_RIGHT),
- KEY(1, 1, KEY_LEFT),
- KEY(1, 2, KEY_ENTER),
- KEY(2, 0, KEY_F6),
- KEY(2, 1, KEY_F8),
- KEY(2, 2, KEY_F9),
- KEY(2, 3, KEY_F10),
-};
-
-static const struct matrix_keymap_data mx31_3ds_keymap_data __initconst = {
- .keymap = mx31_3ds_keymap,
- .keymap_size = ARRAY_SIZE(mx31_3ds_keymap),
-};
-
-/* Regulators */
-static struct regulator_init_data pwgtx_init = {
- .constraints = {
- .boot_on = 1,
- .always_on = 1,
- },
-};
-
-static struct regulator_init_data gpo_init = {
- .constraints = {
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_consumer_supply vmmc2_consumers[] = {
- REGULATOR_SUPPLY("vmmc", "imx31-mmc.0"),
-};
-
-static struct regulator_init_data vmmc2_init = {
- .constraints = {
- .min_uV = 3000000,
- .max_uV = 3000000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(vmmc2_consumers),
- .consumer_supplies = vmmc2_consumers,
-};
-
-static struct regulator_consumer_supply vmmc1_consumers[] = {
- REGULATOR_SUPPLY("vcore", "spi0.0"),
-};
-
-static struct regulator_init_data vmmc1_init = {
- .constraints = {
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
- .consumer_supplies = vmmc1_consumers,
-};
-
-static struct regulator_consumer_supply vgen_consumers[] = {
- REGULATOR_SUPPLY("vdd", "spi0.0"),
-};
-
-static struct regulator_init_data vgen_init = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(vgen_consumers),
- .consumer_supplies = vgen_consumers,
-};
-
-static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
- {
- .id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */
- .init_data = &pwgtx_init,
- }, {
- .id = MC13783_REG_PWGT2SPI, /* Power Gate for L2 Cache. */
- .init_data = &pwgtx_init,
- }, {
-
- .id = MC13783_REG_GPO1, /* Turn on 1.8V */
- .init_data = &gpo_init,
- }, {
- .id = MC13783_REG_GPO3, /* Turn on 3.3V */
- .init_data = &gpo_init,
- }, {
- .id = MC13783_REG_VMMC2, /* Power MMC/SD, WiFi/Bluetooth. */
- .init_data = &vmmc2_init,
- }, {
- .id = MC13783_REG_VMMC1, /* Power LCD, CMOS, FM, GPS, Accel. */
- .init_data = &vmmc1_init,
- }, {
- .id = MC13783_REG_VGEN, /* Power LCD */
- .init_data = &vgen_init,
- },
-};
-
-/* MC13783 */
-static struct mc13xxx_codec_platform_data mx31_3ds_codec = {
- .dac_ssi_port = MC13783_SSI1_PORT,
- .adc_ssi_port = MC13783_SSI1_PORT,
-};
-
-static struct mc13xxx_platform_data mc13783_pdata = {
- .regulators = {
- .regulators = mx31_3ds_regulators,
- .num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
- },
- .codec = &mx31_3ds_codec,
- .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC | MC13XXX_USE_CODEC,
-
-};
-
-static struct imx_ssi_platform_data mx31_3ds_ssi_pdata = {
- .flags = IMX_SSI_DMA | IMX_SSI_NET,
-};
-
-static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
- {
- .modalias = "mc13783",
- .max_speed_hz = 1000000,
- .bus_num = 1,
- .chip_select = 2, /* SS2 */
- .platform_data = &mc13783_pdata,
- /* irq number is run-time assigned */
- .mode = SPI_CS_HIGH,
- }, {
- .modalias = "l4f00242t03",
- .max_speed_hz = 5000000,
- .bus_num = 0,
- .chip_select = 2, /* SS2 */
- },
-};
-
-/*
- * NAND Flash
- */
-static const struct mxc_nand_platform_data
-mx31_3ds_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
-#ifdef CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT
- .flash_bbt = 1,
-#endif
-};
-
-/*
- * USB OTG
- */
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-#define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR)
-#define USBH2_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_BYP)
-
-static int mx31_3ds_usbotg_init(void)
-{
- int err;
-
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
- err = gpio_request(USBOTG_RST_B, "otgusb-reset");
- if (err) {
- pr_err("Failed to request the USB OTG reset gpio\n");
- return err;
- }
-
- err = gpio_direction_output(USBOTG_RST_B, 0);
- if (err) {
- pr_err("Failed to drive the USB OTG reset gpio\n");
- goto usbotg_free_reset;
- }
-
- mdelay(1);
- gpio_set_value(USBOTG_RST_B, 1);
- return 0;
-
-usbotg_free_reset:
- gpio_free(USBOTG_RST_B);
- return err;
-}
-
-static int mx31_3ds_otg_init(struct platform_device *pdev)
-{
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static int mx31_3ds_host2_init(struct platform_device *pdev)
-{
- int err;
-
- mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_PC_VS2, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_PC_BVD1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_PC_BVD2, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_PC_RST, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_IOIS16, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_PC_RW_B, USB_PAD_CFG);
-
- err = gpio_request(USBH2_RST_B, "usbh2-reset");
- if (err) {
- pr_err("Failed to request the USB Host 2 reset gpio\n");
- return err;
- }
-
- err = gpio_direction_output(USBH2_RST_B, 0);
- if (err) {
- pr_err("Failed to drive the USB Host 2 reset gpio\n");
- goto usbotg_free_reset;
- }
-
- mdelay(1);
- gpio_set_value(USBH2_RST_B, 1);
-
- mdelay(10);
-
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-
-usbotg_free_reset:
- gpio_free(USBH2_RST_B);
- return err;
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
- .init = mx31_3ds_otg_init,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
- .init = mx31_3ds_host2_init,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static const struct fsl_usb2_platform_data usbotg_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init mx31_3ds_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", mx31_3ds_otg_mode);
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data mx31_3ds_i2c0_data __initconst = {
- .bitrate = 100000,
-};
-
-static void __init mx31_3ds_init(void)
-{
- imx31_soc_init();
-
- /* Configure SPI1 IOMUX */
- mxc_iomux_set_gpr(MUX_PGP_CSPI_BB, true);
-
- mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
- "mx31_3ds");
-
- imx31_add_imx_uart0(&uart_pdata);
- imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
-
- imx31_add_spi_imx1(NULL);
-
- imx31_add_imx_keypad(&mx31_3ds_keymap_data);
-
- imx31_add_imx2_wdt();
- imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
-
- imx31_add_spi_imx0(NULL);
- imx31_add_ipu_core();
- imx31_add_mx3_sdc_fb(&mx3fb_pdata);
-
- imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata);
-
- imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
-}
-
-static void __init mx31_3ds_late(void)
-{
- gpiod_add_lookup_table(&mx31_3ds_lcd_gpiod_table);
- mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
- spi_register_board_info(mx31_3ds_spi_devs,
- ARRAY_SIZE(mx31_3ds_spi_devs));
-
- mx31_3ds_usbotg_init();
- if (otg_mode_host) {
- otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (otg_pdata.otg)
- imx31_add_mxc_ehci_otg(&otg_pdata);
- }
- usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (usbh2_pdata.otg)
- imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-
- if (!otg_mode_host)
- imx31_add_fsl_usb2_udc(&usbotg_pdata);
-
- if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)))
- printk(KERN_WARNING "Init of the debug board failed, all "
- "devices on the debug board are unusable.\n");
-
- imx31_add_mxc_mmc(0, &sdhc1_pdata);
-}
-
-static void __init mx31_3ds_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
- /* Maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx31_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = mx31_3ds_timer_init,
- .init_machine = mx31_3ds_init,
- .init_late = mx31_3ds_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
deleted file mode 100644
index 4978338..0000000
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ /dev/null
@@ -1,579 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/serial_8250.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
-#include <linux/mfd/wm8350/audio.h>
-#include <linux/mfd/wm8350/core.h>
-#include <linux/mfd/wm8350/pmic.h>
-#endif
-
-#include "common.h"
-#include "devices-imx31.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-
-/* Base address of PBC controller */
-#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT
-
-/* PBC Board interrupt status register */
-#define PBC_INTSTATUS 0x000016
-
-/* PBC Board interrupt current status register */
-#define PBC_INTCURR_STATUS 0x000018
-
-/* PBC Interrupt mask register set address */
-#define PBC_INTMASK_SET 0x00001A
-
-/* PBC Interrupt mask register clear address */
-#define PBC_INTMASK_CLEAR 0x00001C
-
-/* External UART A */
-#define PBC_SC16C652_UARTA 0x010000
-
-/* External UART B */
-#define PBC_SC16C652_UARTB 0x010010
-
-#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
-
-#define EXPIO_INT_XUART_INTA 10
-#define EXPIO_INT_XUART_INTB 11
-
-#define MXC_MAX_EXP_IO_LINES 16
-
-/* CS8900 */
-#define EXPIO_INT_ENET_INT 8
-#define CS4_CS8900_MMIO_START 0x20000
-
-static struct irq_domain *domain;
-
-/*
- * The serial port definition structure.
- */
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
- .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
- .uartclk = 14745600,
- .regshift = 0,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
- }, {
- .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
- .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
- .uartclk = 14745600,
- .regshift = 0,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
- },
- {},
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = 0,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-static struct resource mx31ads_cs8900_resources[] __initdata = {
- DEFINE_RES_MEM(MX31_CS4_BASE_ADDR + CS4_CS8900_MMIO_START, SZ_64K),
- DEFINE_RES_IRQ(-1),
-};
-
-static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = {
- .name = "cs89x0",
- .id = 0,
- .res = mx31ads_cs8900_resources,
- .num_res = ARRAY_SIZE(mx31ads_cs8900_resources),
-};
-
-static int __init mxc_init_extuart(void)
-{
- serial_platform_data[0].irq = irq_find_mapping(domain,
- EXPIO_INT_XUART_INTA);
- serial_platform_data[1].irq = irq_find_mapping(domain,
- EXPIO_INT_XUART_INTB);
- return platform_device_register(&serial_device);
-}
-
-static void __init mxc_init_ext_ethernet(void)
-{
- mx31ads_cs8900_resources[1].start =
- irq_find_mapping(domain, EXPIO_INT_ENET_INT);
- mx31ads_cs8900_resources[1].end =
- irq_find_mapping(domain, EXPIO_INT_ENET_INT);
- platform_device_register_full(
- (struct platform_device_info *)&mx31ads_cs8900_devinfo);
-}
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static unsigned int uart_pins[] = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1
-};
-
-static inline void mxc_init_imx_uart(void)
-{
- mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
- imx31_add_imx_uart0(&uart_pdata);
-}
-
-static void mx31ads_expio_irq_handler(struct irq_desc *desc)
-{
- u32 imr_val;
- u32 int_valid;
- u32 expio_irq;
-
- imr_val = imx_readw(PBC_INTMASK_SET_REG);
- int_valid = imx_readw(PBC_INTSTATUS_REG) & imr_val;
-
- expio_irq = 0;
- for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
- if ((int_valid & 1) == 0)
- continue;
-
- generic_handle_irq(irq_find_mapping(domain, expio_irq));
- }
-}
-
-/*
- * Disable an expio pin's interrupt by setting the bit in the imr.
- * @param d an expio virtual irq description
- */
-static void expio_mask_irq(struct irq_data *d)
-{
- u32 expio = d->hwirq;
- /* mask the interrupt */
- imx_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
- imx_readw(PBC_INTMASK_CLEAR_REG);
-}
-
-/*
- * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
- * @param d an expio virtual irq description
- */
-static void expio_ack_irq(struct irq_data *d)
-{
- u32 expio = d->hwirq;
- /* clear the interrupt status */
- imx_writew(1 << expio, PBC_INTSTATUS_REG);
-}
-
-/*
- * Enable a expio pin's interrupt by clearing the bit in the imr.
- * @param d an expio virtual irq description
- */
-static void expio_unmask_irq(struct irq_data *d)
-{
- u32 expio = d->hwirq;
- /* unmask the interrupt */
- imx_writew(1 << expio, PBC_INTMASK_SET_REG);
-}
-
-static struct irq_chip expio_irq_chip = {
- .name = "EXPIO(CPLD)",
- .irq_ack = expio_ack_irq,
- .irq_mask = expio_mask_irq,
- .irq_unmask = expio_unmask_irq,
-};
-
-static void __init mx31ads_init_expio(void)
-{
- int irq_base;
- int i, irq;
-
- printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");
-
- /*
- * Configure INT line as GPIO input
- */
- mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
-
- /* disable the interrupt and clear the status */
- imx_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
- imx_writew(0xFFFF, PBC_INTSTATUS_REG);
-
- irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
- WARN_ON(irq_base < 0);
-
- domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0,
- &irq_domain_simple_ops, NULL);
- WARN_ON(!domain);
-
- for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) {
- irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
- irq_clear_status_flags(i, IRQ_NOREQUEST);
- }
- irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_4));
- irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
- irq_set_chained_handler(irq, mx31ads_expio_irq_handler);
-}
-
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
-/* This section defines setup for the Wolfson Microelectronics
- * 1133-EV1 PMU/audio board. When other PMU boards are supported the
- * regulator definitions may be shared with them, but for now they can
- * only be used with this board so would generate warnings about
- * unused statics and some of the configuration is specific to this
- * module.
- */
-
-/* CPU */
-static struct regulator_consumer_supply sw1a_consumers[] = {
- {
- .supply = "cpu_vcc",
- }
-};
-
-static struct regulator_init_data sw1a_data = {
- .constraints = {
- .name = "SW1A",
- .min_uV = 1275000,
- .max_uV = 1600000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_FAST,
- .state_mem = {
- .uV = 1400000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- .initial_state = PM_SUSPEND_MEM,
- .always_on = 1,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(sw1a_consumers),
- .consumer_supplies = sw1a_consumers,
-};
-
-/* System IO - High */
-static struct regulator_init_data viohi_data = {
- .constraints = {
- .name = "VIOHO",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .state_mem = {
- .uV = 2800000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- .initial_state = PM_SUSPEND_MEM,
- .always_on = 1,
- .boot_on = 1,
- },
-};
-
-/* System IO - Low */
-static struct regulator_init_data violo_data = {
- .constraints = {
- .name = "VIOLO",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .state_mem = {
- .uV = 1800000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- .initial_state = PM_SUSPEND_MEM,
- .always_on = 1,
- .boot_on = 1,
- },
-};
-
-/* DDR RAM */
-static struct regulator_init_data sw2a_data = {
- .constraints = {
- .name = "SW2A",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .state_mem = {
- .uV = 1800000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- .state_disk = {
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 0,
- },
- .always_on = 1,
- .boot_on = 1,
- .initial_state = PM_SUSPEND_MEM,
- },
-};
-
-static struct regulator_init_data ldo1_data = {
- .constraints = {
- .name = "VCAM/VMMC1/VMMC2",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- },
-};
-
-static struct regulator_consumer_supply ldo2_consumers[] = {
- { .supply = "AVDD", .dev_name = "1-001a" },
- { .supply = "HPVDD", .dev_name = "1-001a" },
-};
-
-/* CODEC and SIM */
-static struct regulator_init_data ldo2_data = {
- .constraints = {
- .name = "VESIM/VSIM/AVDD",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
- .consumer_supplies = ldo2_consumers,
-};
-
-/* General */
-static struct regulator_init_data vdig_data = {
- .constraints = {
- .name = "VDIG",
- .min_uV = 1500000,
- .max_uV = 1500000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .apply_uV = 1,
- .always_on = 1,
- .boot_on = 1,
- },
-};
-
-/* Tranceivers */
-static struct regulator_init_data ldo4_data = {
- .constraints = {
- .name = "VRF1/CVDD_2.775",
- .min_uV = 2500000,
- .max_uV = 2500000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .apply_uV = 1,
- .always_on = 1,
- .boot_on = 1,
- },
-};
-
-static struct wm8350_led_platform_data wm8350_led_data = {
- .name = "wm8350:white",
- .default_trigger = "heartbeat",
- .max_uA = 27899,
-};
-
-static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
- .vmid_discharge_msecs = 1000,
- .drain_msecs = 30,
- .cap_discharge_msecs = 700,
- .vmid_charge_msecs = 700,
- .vmid_s_curve = WM8350_S_CURVE_SLOW,
- .dis_out4 = WM8350_DISCHARGE_SLOW,
- .dis_out3 = WM8350_DISCHARGE_SLOW,
- .dis_out2 = WM8350_DISCHARGE_SLOW,
- .dis_out1 = WM8350_DISCHARGE_SLOW,
- .vroi_out4 = WM8350_TIE_OFF_500R,
- .vroi_out3 = WM8350_TIE_OFF_500R,
- .vroi_out2 = WM8350_TIE_OFF_500R,
- .vroi_out1 = WM8350_TIE_OFF_500R,
- .vroi_enable = 0,
- .codec_current_on = WM8350_CODEC_ISEL_1_0,
- .codec_current_standby = WM8350_CODEC_ISEL_0_5,
- .codec_current_charge = WM8350_CODEC_ISEL_1_5,
-};
-
-static int mx31_wm8350_init(struct wm8350 *wm8350)
-{
- wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
- WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
- WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_ON);
-
- wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN,
- WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH,
- WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_ON);
-
- wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN,
- WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH,
- WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_OFF);
-
- wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN,
- WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH,
- WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_OFF);
-
- wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT,
- WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH,
- WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_OFF);
-
- wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT,
- WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
- WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_OFF);
-
- wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT,
- WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
- WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_OFF);
-
- wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
- wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
- wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
- wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data);
- wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data);
- wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data);
- wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data);
- wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data);
-
- /* LEDs */
- wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1,
- WM8350_DC5_ERRACT_SHUTDOWN_CONV);
- wm8350_isink_set_flash(wm8350, WM8350_ISINK_A,
- WM8350_ISINK_FLASH_DISABLE,
- WM8350_ISINK_FLASH_TRIG_BIT,
- WM8350_ISINK_FLASH_DUR_32MS,
- WM8350_ISINK_FLASH_ON_INSTANT,
- WM8350_ISINK_FLASH_OFF_INSTANT,
- WM8350_ISINK_FLASH_MODE_EN);
- wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5,
- WM8350_ISINK_MODE_BOOST,
- WM8350_ISINK_ILIM_NORMAL,
- WM8350_DC5_RMP_20V,
- WM8350_DC5_FBSRC_ISINKA);
- wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A,
- &wm8350_led_data);
-
- wm8350->codec.platform_data = &imx32ads_wm8350_setup;
-
- regulator_has_full_constraints();
-
- return 0;
-}
-
-static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
- .init = mx31_wm8350_init,
-};
-#endif
-
-static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
- {
- I2C_BOARD_INFO("wm8350", 0x1a),
- .platform_data = &mx31_wm8350_pdata,
- /* irq number is run-time assigned */
- },
-#endif
-};
-
-static void __init mxc_init_i2c(void)
-{
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
- mx31ads_i2c1_devices[0].irq =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
-#endif
- i2c_register_board_info(1, mx31ads_i2c1_devices,
- ARRAY_SIZE(mx31ads_i2c1_devices));
-
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
-
- imx31_add_imx_i2c1(NULL);
-}
-
-static unsigned int ssi_pins[] = {
- MX31_PIN_SFS5__SFS5,
- MX31_PIN_SCK5__SCK5,
- MX31_PIN_SRXD5__SRXD5,
- MX31_PIN_STXD5__STXD5,
-};
-
-static void __init mxc_init_audio(void)
-{
- imx31_add_imx_ssi(0, NULL);
- mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
-}
-
-/*
- * Static mappings, starting from the CS4 start address up to the start address
- * of the CS8900.
- */
-static struct map_desc mx31ads_io_desc[] __initdata = {
- {
- .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
- .length = CS4_CS8900_MMIO_START,
- .type = MT_DEVICE
- },
-};
-
-static void __init mx31ads_map_io(void)
-{
- mx31_map_io();
- iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
-}
-
-static void __init mx31ads_init(void)
-{
- imx31_soc_init();
-
- mxc_init_imx_uart();
- mxc_init_audio();
-}
-
-static void __init mx31ads_late(void)
-{
- mx31ads_init_expio();
- mxc_init_extuart();
- mxc_init_i2c();
- mxc_init_ext_ethernet();
-}
-
-static void __init mx31ads_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-MACHINE_START(MX31ADS, "Freescale MX31ADS")
- /* Maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx31ads_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = mx31ads_timer_init,
- .init_machine = mx31ads_init,
- .init_late = mx31ads_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
deleted file mode 100644
index 4b955cc..0000000
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ /dev/null
@@ -1,312 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * LILLY-1131 module support
- *
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * based on code for other MX31 boards,
- *
- * Copyright 2005-2007 Freescale Semiconductor
- * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/moduleparam.h>
-#include <linux/smsc911x.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "board-mx31lilly.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-#include "ulpi.h"
-
-/*
- * This file contains module-specific initialization routines for LILLY-1131.
- * Initialization of peripherals found on the baseboard is implemented in the
- * appropriate baseboard support code.
- */
-
-static unsigned int mx31lilly_pins[] __initdata = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
- MX31_PIN_CTS2__CTS2,
- MX31_PIN_RTS2__RTS2,
- MX31_PIN_TXD2__TXD2,
- MX31_PIN_RXD2__RXD2,
- MX31_PIN_CSPI3_MOSI__RXD3,
- MX31_PIN_CSPI3_MISO__TXD3,
- MX31_PIN_CSPI3_SCLK__RTS3,
- MX31_PIN_CSPI3_SPI_RDY__CTS3,
-};
-
-/* UART */
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-/* SMSC ethernet support */
-
-static struct resource smsc91x_resources[] = {
- {
- .start = MX31_CS4_BASE_ADDR,
- .end = MX31_CS4_BASE_ADDR + 0xffff,
- .flags = IORESOURCE_MEM,
- },
- {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
- }
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT |
- SMSC911X_SAVE_MAC_ADDRESS |
- SMSC911X_FORCE_INTERNAL_PHY,
-};
-
-static struct platform_device smsc91x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc91x_resources),
- .resource = smsc91x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- }
-};
-
-/* NOR flash */
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
-};
-
-static struct resource nor_flash_resource = {
- .start = 0xa0000000,
- .end = 0xa1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device physmap_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .resource = &nor_flash_resource,
- .num_resources = 1,
-};
-
-/* USB */
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int usbh1_init(struct platform_device *pdev)
-{
- int pins[] = {
- MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
- MX31_PIN_CSPI1_MISO__USBH1_RXDP,
- MX31_PIN_CSPI1_SS0__USBH1_TXDM,
- MX31_PIN_CSPI1_SS1__USBH1_TXDP,
- MX31_PIN_CSPI1_SS2__USBH1_RCV,
- MX31_PIN_CSPI1_SCLK__USBH1_OEB,
- MX31_PIN_CSPI1_SPI_RDY__USBH1_FS,
- };
-
- mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H1");
-
- mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
-
- mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
-
- mdelay(10);
-
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
- MXC_EHCI_INTERFACE_SINGLE_UNI);
-}
-
-static int usbh2_init(struct platform_device *pdev)
-{
- int pins[] = {
- MX31_PIN_USBH2_DATA0__USBH2_DATA0,
- MX31_PIN_USBH2_DATA1__USBH2_DATA1,
- MX31_PIN_USBH2_CLK__USBH2_CLK,
- MX31_PIN_USBH2_DIR__USBH2_DIR,
- MX31_PIN_USBH2_NXT__USBH2_NXT,
- MX31_PIN_USBH2_STP__USBH2_STP,
- };
-
- mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
-
- mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
-
- mxc_iomux_set_gpr(MUX_PGP_UH2, true);
-
- /* chip select */
- mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
- "USBH2_CS");
- gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
- gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
-
- mdelay(10);
-
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
- .init = usbh1_init,
- .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-};
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
- .init = usbh2_init,
- .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-static void __init lilly1131_usb_init(void)
-{
- imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
-
- usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (usbh2_pdata.otg)
- imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-}
-
-static struct mc13xxx_platform_data mc13783_pdata __initdata = {
- .flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
-};
-
-static struct spi_board_info mc13783_dev __initdata = {
- .modalias = "mc13783",
- .max_speed_hz = 1000000,
- .bus_num = 1,
- .chip_select = 0,
- .platform_data = &mc13783_pdata,
- /* irq number is run-time assigned */
-};
-
-static struct platform_device *devices[] __initdata = {
- &smsc91x_device,
- &physmap_flash_device,
-};
-
-static int mx31lilly_baseboard;
-core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-static void __init mx31lilly_board_init(void)
-{
- imx31_soc_init();
-
- mxc_iomux_setup_multiple_pins(mx31lilly_pins,
- ARRAY_SIZE(mx31lilly_pins), "mx31lily");
-
- imx31_add_imx_uart0(&uart_pdata);
- imx31_add_imx_uart1(&uart_pdata);
- imx31_add_imx_uart2(&uart_pdata);
-
- mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
-
- /* SPI */
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2");
-
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
-
- imx31_add_spi_imx0(NULL);
- imx31_add_spi_imx1(NULL);
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-}
-
-static void __init mx31lilly_late_init(void)
-{
- if (mx31lilly_baseboard == MX31LILLY_DB)
- mx31lilly_db_init();
-
- mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
- spi_register_board_info(&mc13783_dev, 1);
-
- smsc91x_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
- smsc91x_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- /* USB */
- lilly1131_usb_init();
-}
-
-static void __init mx31lilly_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
- .atag_offset = 0x100,
- .map_io = mx31_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = mx31lilly_timer_init,
- .init_machine = mx31lilly_board_init,
- .init_late = mx31lilly_late_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
deleted file mode 100644
index aaccf52..0000000
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ /dev/null
@@ -1,290 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/memory.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/moduleparam.h>
-#include <linux/smsc911x.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/mtd/physmap.h>
-#include <linux/delay.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-
-#include "board-mx31lite.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-#include "ulpi.h"
-
-/*
- * This file contains the module-specific initialization routines.
- */
-
-static unsigned int mx31lite_pins[] = {
- /* UART1 */
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
- /* SPI 0 */
- MX31_PIN_CSPI1_SCLK__SCLK,
- MX31_PIN_CSPI1_MOSI__MOSI,
- MX31_PIN_CSPI1_MISO__MISO,
- MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI1_SS0__SS0,
- MX31_PIN_CSPI1_SS1__SS1,
- MX31_PIN_CSPI1_SS2__SS2,
- /* LAN9117 IRQ pin */
- IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
- /* SPI 1 */
- MX31_PIN_CSPI2_SCLK__SCLK,
- MX31_PIN_CSPI2_MOSI__MOSI,
- MX31_PIN_CSPI2_MISO__MISO,
- MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI2_SS0__SS0,
- MX31_PIN_CSPI2_SS1__SS1,
- MX31_PIN_CSPI2_SS2__SS2,
-};
-
-/* UART */
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct mxc_nand_platform_data
-mx31lite_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_16BIT,
-};
-
-static struct resource smsc911x_resources[] = {
- {
- .start = MX31_CS4_BASE_ADDR,
- .end = MX31_CS4_BASE_ADDR + 0x100,
- .flags = IORESOURCE_MEM,
- }, {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct mc13xxx_platform_data mc13783_pdata __initdata = {
- .flags = MC13XXX_USE_RTC,
-};
-
-static struct spi_board_info mc13783_spi_dev __initdata = {
- .modalias = "mc13783",
- .max_speed_hz = 1000000,
- .bus_num = 1,
- .chip_select = 0,
- .platform_data = &mc13783_pdata,
- /* irq number is run-time assigned */
-};
-
-/*
- * USB
- */
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int usbh2_init(struct platform_device *pdev)
-{
- int pins[] = {
- MX31_PIN_USBH2_DATA0__USBH2_DATA0,
- MX31_PIN_USBH2_DATA1__USBH2_DATA1,
- MX31_PIN_USBH2_CLK__USBH2_CLK,
- MX31_PIN_USBH2_DIR__USBH2_DIR,
- MX31_PIN_USBH2_NXT__USBH2_NXT,
- MX31_PIN_USBH2_STP__USBH2_STP,
- };
-
- mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
-
- mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
-
- mxc_iomux_set_gpr(MUX_PGP_UH2, true);
-
- /* chip select */
- mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
- "USBH2_CS");
- gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
- gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
-
- mdelay(10);
-
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
- .init = usbh2_init,
- .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-/*
- * NOR flash
- */
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
-};
-
-static struct resource nor_flash_resource = {
- .start = 0xa0000000,
- .end = 0xa1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device physmap_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .resource = &nor_flash_resource,
- .num_resources = 1,
-};
-
-/*
- * This structure defines the MX31 memory map.
- */
-static struct map_desc mx31lite_io_desc[] __initdata = {
- {
- .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
- .length = MX31_CS4_SIZE,
- .type = MT_DEVICE
- }
-};
-
-/*
- * Set up static virtual mappings.
- */
-static void __init mx31lite_map_io(void)
-{
- mx31_map_io();
- iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
-}
-
-static int mx31lite_baseboard;
-core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-static void __init mx31lite_init(void)
-{
- imx31_soc_init();
-
- mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
- "mx31lite");
-
- imx31_add_imx_uart0(&uart_pdata);
- imx31_add_spi_imx0(NULL);
-
- /* NOR and NAND flash */
- platform_device_register(&physmap_flash_device);
- imx31_add_mxc_nand(&mx31lite_nand_board_info);
-
- imx31_add_spi_imx1(NULL);
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-}
-
-static void __init mx31lite_late(void)
-{
- int ret;
-
- if (mx31lite_baseboard == MX31LITE_DB)
- mx31lite_db_init();
-
- mc13783_spi_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
- spi_register_board_info(&mc13783_spi_dev, 1);
-
- /* USB */
- usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (usbh2_pdata.otg)
- imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-
- /* SMSC9117 IRQ pin */
- ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
- if (ret)
- pr_warn("could not get LAN irq gpio\n");
- else {
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
- smsc911x_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6));
- smsc911x_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6));
- platform_device_register(&smsc911x_device);
- }
-}
-
-static void __init mx31lite_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
- /* Maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx31lite_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = mx31lite_timer_init,
- .init_machine = mx31lite_init,
- .init_late = mx31lite_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
deleted file mode 100644
index 7f780ad..0000000
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ /dev/null
@@ -1,581 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2008 Valentin Longchamp, EPFL Mobots group
- */
-
-#include <linux/delay.h>
-#include <linux/dma-map-ops.h>
-#include <linux/gfp.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/moduleparam.h>
-#include <linux/leds.h>
-#include <linux/memory.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/types.h>
-#include <linux/memblock.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/input.h>
-
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <asm/memblock.h>
-#include <linux/platform_data/asoc-imx-ssi.h>
-
-#include "board-mx31moboard.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-#include "ulpi.h"
-
-static unsigned int moboard_pins[] = {
- /* UART0 */
- MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
- MX31_PIN_CTS1__GPIO2_7,
- /* UART4 */
- MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
- MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
- /* I2C0 */
- MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
- /* I2C1 */
- MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
- /* SDHC1 */
- MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
- MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
- /* USB reset */
- MX31_PIN_GPIO1_0__GPIO1_0,
- /* USB OTG */
- MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
- MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
- MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
- MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
- MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
- MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
- MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
- MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
- MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
- MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
- MX31_PIN_USB_OC__GPIO1_30,
- /* USB H2 */
- MX31_PIN_USBH2_DATA0__USBH2_DATA0,
- MX31_PIN_USBH2_DATA1__USBH2_DATA1,
- MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
- MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
- MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
- MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
- MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
- MX31_PIN_SCK6__GPIO1_25,
- /* LEDs */
- MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
- MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
- /* SPI1 */
- MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
- MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
- /* Atlas IRQ */
- MX31_PIN_GPIO1_3__GPIO1_3,
- /* SPI2 */
- MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
- MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI2_SS1__CSPI3_SS1,
- /* SSI */
- MX31_PIN_STXD4__STXD4, MX31_PIN_SRXD4__SRXD4,
- MX31_PIN_SCK4__SCK4, MX31_PIN_SFS4__SFS4,
-};
-
-static struct physmap_flash_data mx31moboard_flash_data = {
- .width = 2,
-};
-
-static struct resource mx31moboard_flash_resource = {
- .start = 0xa0000000,
- .end = 0xa1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device mx31moboard_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &mx31moboard_flash_data,
- },
- .resource = &mx31moboard_flash_resource,
- .num_resources = 1,
-};
-
-static void __init moboard_uart0_init(void)
-{
- if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack")) {
- gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
- gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
- }
-}
-
-static const struct imxuart_platform_data uart0_pdata __initconst = {
-};
-
-static const struct imxuart_platform_data uart4_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data moboard_i2c0_data __initconst = {
- .bitrate = 400000,
-};
-
-static const struct imxi2c_platform_data moboard_i2c1_data __initconst = {
- .bitrate = 100000,
-};
-
-static struct regulator_consumer_supply sdhc_consumers[] = {
- {
- .dev_name = "imx31-mmc.0",
- .supply = "sdhc0_vcc",
- },
- {
- .dev_name = "imx31-mmc.1",
- .supply = "sdhc1_vcc",
- },
-};
-
-static struct regulator_init_data sdhc_vreg_data = {
- .constraints = {
- .min_uV = 2700000,
- .max_uV = 3000000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_FAST,
- .always_on = 0,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
- .consumer_supplies = sdhc_consumers,
-};
-
-static struct regulator_consumer_supply cam_consumers[] = {
- {
- .dev_name = "mx3_camera.0",
- .supply = "cam_vcc",
- },
-};
-
-static struct regulator_init_data cam_vreg_data = {
- .constraints = {
- .min_uV = 2700000,
- .max_uV = 3000000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_FAST,
- .always_on = 0,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(cam_consumers),
- .consumer_supplies = cam_consumers,
-};
-
-static struct mc13xxx_regulator_init_data moboard_regulators[] = {
- {
- .id = MC13783_REG_VMMC1,
- .init_data = &sdhc_vreg_data,
- },
- {
- .id = MC13783_REG_VCAM,
- .init_data = &cam_vreg_data,
- },
-};
-
-static struct mc13xxx_led_platform_data moboard_led[] = {
- {
- .id = MC13783_LED_R1,
- .name = "coreboard-led-4:red",
- },
- {
- .id = MC13783_LED_G1,
- .name = "coreboard-led-4:green",
- },
- {
- .id = MC13783_LED_B1,
- .name = "coreboard-led-4:blue",
- },
- {
- .id = MC13783_LED_R2,
- .name = "coreboard-led-5:red",
- },
- {
- .id = MC13783_LED_G2,
- .name = "coreboard-led-5:green",
- },
- {
- .id = MC13783_LED_B2,
- .name = "coreboard-led-5:blue",
- },
-};
-
-static struct mc13xxx_leds_platform_data moboard_leds = {
- .num_leds = ARRAY_SIZE(moboard_led),
- .led = moboard_led,
- .led_control[0] = MC13783_LED_C0_ENABLE | MC13783_LED_C0_ABMODE(0),
- .led_control[1] = MC13783_LED_C1_SLEWLIM,
- .led_control[2] = MC13783_LED_C2_SLEWLIM,
- .led_control[3] = MC13783_LED_C3_PERIOD(0) |
- MC13783_LED_C3_CURRENT_R1(2) |
- MC13783_LED_C3_CURRENT_G1(2) |
- MC13783_LED_C3_CURRENT_B1(2),
- .led_control[4] = MC13783_LED_C4_PERIOD(0) |
- MC13783_LED_C4_CURRENT_R2(3) |
- MC13783_LED_C4_CURRENT_G2(3) |
- MC13783_LED_C4_CURRENT_B2(3),
-};
-
-static struct mc13xxx_buttons_platform_data moboard_buttons = {
- .b1on_flags = MC13783_BUTTON_DBNC_750MS | MC13783_BUTTON_ENABLE |
- MC13783_BUTTON_POL_INVERT,
- .b1on_key = KEY_POWER,
-};
-
-static struct mc13xxx_codec_platform_data moboard_codec = {
- .dac_ssi_port = MC13783_SSI1_PORT,
- .adc_ssi_port = MC13783_SSI1_PORT,
-};
-
-static struct mc13xxx_platform_data moboard_pmic = {
- .regulators = {
- .regulators = moboard_regulators,
- .num_regulators = ARRAY_SIZE(moboard_regulators),
- },
- .leds = &moboard_leds,
- .buttons = &moboard_buttons,
- .codec = &moboard_codec,
- .flags = MC13XXX_USE_RTC | MC13XXX_USE_ADC | MC13XXX_USE_CODEC,
-};
-
-static struct imx_ssi_platform_data moboard_ssi_pdata = {
- .flags = IMX_SSI_DMA | IMX_SSI_NET,
-};
-
-static struct spi_board_info moboard_spi_board_info[] __initdata = {
- {
- .modalias = "mc13783",
- /* irq number is run-time assigned */
- .max_speed_hz = 300000,
- .bus_num = 1,
- .chip_select = 0,
- .platform_data = &moboard_pmic,
- .mode = SPI_CS_HIGH,
- },
-};
-
-#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
-#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
-
-static int moboard_sdhc1_get_ro(struct device *dev)
-{
- return !gpio_get_value(SDHC1_WP);
-}
-
-static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- int ret;
-
- ret = gpio_request(SDHC1_CD, "sdhc-detect");
- if (ret)
- return ret;
-
- gpio_direction_input(SDHC1_CD);
-
- ret = gpio_request(SDHC1_WP, "sdhc-wp");
- if (ret)
- goto err_gpio_free;
- gpio_direction_input(SDHC1_WP);
-
- ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "sdhc1-card-detect", data);
- if (ret)
- goto err_gpio_free_2;
-
- return 0;
-
-err_gpio_free_2:
- gpio_free(SDHC1_WP);
-err_gpio_free:
- gpio_free(SDHC1_CD);
-
- return ret;
-}
-
-static void moboard_sdhc1_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(SDHC1_CD), data);
- gpio_free(SDHC1_WP);
- gpio_free(SDHC1_CD);
-}
-
-static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
- .get_ro = moboard_sdhc1_get_ro,
- .init = moboard_sdhc1_init,
- .exit = moboard_sdhc1_exit,
-};
-
-/*
- * this pin is dedicated for all mx31moboard systems, so we do it here
- */
-#define USB_RESET_B IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS)
-
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
-
-static void usb_xcvr_reset(void)
-{
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
-
- mxc_iomux_set_gpr(MUX_PGP_UH2, true);
- mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
- mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
-
- gpio_request(OTG_EN_B, "usb-udc-en");
- gpio_direction_output(OTG_EN_B, 0);
- gpio_request(USBH2_EN_B, "usbh2-en");
- gpio_direction_output(USBH2_EN_B, 0);
-
- gpio_request(USB_RESET_B, "usb-reset");
- gpio_direction_output(USB_RESET_B, 0);
- mdelay(1);
- gpio_set_value(USB_RESET_B, 1);
- mdelay(1);
-}
-
-static int moboard_usbh2_init_hw(struct platform_device *pdev)
-{
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
- .init = moboard_usbh2_init_hw,
- .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-static int __init moboard_usbh2_init(void)
-{
- struct platform_device *pdev;
-
- usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (!usbh2_pdata.otg)
- return -ENODEV;
-
- pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-
- return PTR_ERR_OR_ZERO(pdev);
-}
-
-static const struct gpio_led mx31moboard_leds[] __initconst = {
- {
- .name = "coreboard-led-0:red:running",
- .default_trigger = "heartbeat",
- .gpio = IOMUX_TO_GPIO(MX31_PIN_SVEN0),
- }, {
- .name = "coreboard-led-1:red",
- .gpio = IOMUX_TO_GPIO(MX31_PIN_STX0),
- }, {
- .name = "coreboard-led-2:red",
- .gpio = IOMUX_TO_GPIO(MX31_PIN_SRX0),
- }, {
- .name = "coreboard-led-3:red",
- .gpio = IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
- },
-};
-
-static const struct gpio_led_platform_data mx31moboard_led_pdata __initconst = {
- .num_leds = ARRAY_SIZE(mx31moboard_leds),
- .leds = mx31moboard_leds,
-};
-
-static struct platform_device *devices[] __initdata = {
- &mx31moboard_flash,
-};
-
-static struct mx3_camera_pdata camera_pdata __initdata = {
- .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
- .mclk_10khz = 4800,
-};
-
-static phys_addr_t mx3_camera_base __initdata;
-#define MX3_CAMERA_BUF_SIZE SZ_4M
-
-static int __init mx31moboard_init_cam(void)
-{
- int ret;
- struct platform_device *pdev;
-
- imx31_add_ipu_core();
-
- pdev = imx31_alloc_mx3_camera(&camera_pdata);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- ret = dma_declare_coherent_memory(&pdev->dev,
- mx3_camera_base, mx3_camera_base,
- MX3_CAMERA_BUF_SIZE);
- if (ret)
- goto err;
-
- ret = platform_device_add(pdev);
- if (ret)
-err:
- platform_device_put(pdev);
-
- return ret;
-
-}
-
-static void mx31moboard_poweroff(void)
-{
- struct clk *clk = clk_get_sys("imx2-wdt.0", NULL);
-
- if (!IS_ERR(clk))
- clk_prepare_enable(clk);
-
- mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);
-
- imx_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-}
-
-static int mx31moboard_baseboard;
-core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
-
-/*
- * Board specific initialization.
- */
-static void __init mx31moboard_init(void)
-{
- imx31_soc_init();
-
- mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
- "moboard");
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- imx31_add_imx2_wdt();
-
- imx31_add_imx_uart0(&uart0_pdata);
- imx31_add_imx_uart4(&uart4_pdata);
-
- imx31_add_imx_i2c0(&moboard_i2c0_data);
- imx31_add_imx_i2c1(&moboard_i2c1_data);
-
- imx31_add_spi_imx1(NULL);
- imx31_add_spi_imx2(NULL);
-
- mx31moboard_init_cam();
-
- imx31_add_imx_ssi(0, &moboard_ssi_pdata);
-
- pm_power_off = mx31moboard_poweroff;
-}
-
-static void __init mx31moboard_late(void)
-{
- gpio_led_register_device(-1, &mx31moboard_led_pdata);
-
- moboard_uart0_init();
-
- gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
- moboard_spi_board_info[0].irq =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
- spi_register_board_info(moboard_spi_board_info,
- ARRAY_SIZE(moboard_spi_board_info));
-
- imx31_add_mxc_mmc(0, &sdhc1_pdata);
-
- usb_xcvr_reset();
- moboard_usbh2_init();
-
- imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
-
- switch (mx31moboard_baseboard) {
- case MX31NOBOARD:
- break;
- case MX31DEVBOARD:
- mx31moboard_devboard_init();
- break;
- case MX31MARXBOT:
- mx31moboard_marxbot_init();
- break;
- case MX31SMARTBOT:
- case MX31EYEBOT:
- mx31moboard_smartbot_init(mx31moboard_baseboard);
- break;
- default:
- printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
- mx31moboard_baseboard);
- }
-}
-
-static void __init mx31moboard_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-static void __init mx31moboard_reserve(void)
-{
- /* reserve 4 MiB for mx3-camera */
- mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE,
- MX3_CAMERA_BUF_SIZE);
-}
-
-MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
- /* Maintainer: Philippe Retornaz, EPFL Mobots group */
- .atag_offset = 0x100,
- .reserve = mx31moboard_reserve,
- .map_io = mx31_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = mx31moboard_timer_init,
- .init_machine = mx31moboard_init,
- .init_late = mx31moboard_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
deleted file mode 100644
index 802e0ab..0000000
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ /dev/null
@@ -1,516 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * Copyright (C) 2011 Meprolight, Ltd.
- * Alex Gershgorin <alexg@meprolight.com>
- *
- * Modified from i.MX31 3-Stack Development System
- */
-
-/*
- * This machine is known as:
- * - i.MX35 3-Stack Development System
- * - i.MX35 Platform Development Kit (i.MX35 PDK)
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/usb/otg.h>
-
-#include <linux/mtd/physmap.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <video/platform_lcd.h>
-
-#include "3ds_debugboard.h"
-#include "common.h"
-#include "devices-imx35.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx35.h"
-
-#define GPIO_MC9S08DZ60_GPS_ENABLE 0
-#define GPIO_MC9S08DZ60_HDD_ENABLE 4
-#define GPIO_MC9S08DZ60_WIFI_ENABLE 5
-#define GPIO_MC9S08DZ60_LCD_ENABLE 6
-#define GPIO_MC9S08DZ60_SPEAKER_ENABLE 8
-
-static const struct fb_videomode fb_modedb[] = {
- {
- /* 800x480 @ 55 Hz */
- .name = "Ceramate-CLAA070VC01",
- .refresh = 55,
- .xres = 800,
- .yres = 480,
- .pixclock = 40000,
- .left_margin = 40,
- .right_margin = 40,
- .upper_margin = 5,
- .lower_margin = 5,
- .hsync_len = 20,
- .vsync_len = 10,
- .sync = FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
- .name = "Ceramate-CLAA070VC01",
- .mode = fb_modedb,
- .num_modes = ARRAY_SIZE(fb_modedb),
-};
-
-static struct i2c_board_info __initdata i2c_devices_3ds[] = {
- {
- I2C_BOARD_INFO("mc9s08dz60", 0x69),
- },
-};
-
-static int lcd_power_gpio = -ENXIO;
-
-static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip, void *data)
-{
- return !strcmp(chip->label, data);
-}
-
-static void mx35_3ds_lcd_set_power(
- struct plat_lcd_data *pd, unsigned int power)
-{
- struct gpio_chip *chip;
-
- if (!gpio_is_valid(lcd_power_gpio)) {
- chip = gpiochip_find(
- "mc9s08dz60", mc9s08dz60_gpiochip_match);
- if (chip) {
- lcd_power_gpio =
- chip->base + GPIO_MC9S08DZ60_LCD_ENABLE;
- if (gpio_request(lcd_power_gpio, "lcd_power") < 0) {
- pr_err("error: gpio already requested!\n");
- lcd_power_gpio = -ENXIO;
- }
- } else {
- pr_err("error: didn't find mc9s08dz60 gpio chip\n");
- }
- }
-
- if (gpio_is_valid(lcd_power_gpio))
- gpio_set_value_cansleep(lcd_power_gpio, power);
-}
-
-static struct plat_lcd_data mx35_3ds_lcd_data = {
- .set_power = mx35_3ds_lcd_set_power,
-};
-
-static struct platform_device mx35_3ds_lcd = {
- .name = "platform-lcd",
- .dev.platform_data = &mx35_3ds_lcd_data,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct physmap_flash_data mx35pdk_flash_data = {
- .width = 2,
-};
-
-static struct resource mx35pdk_flash_resource = {
- .start = MX35_CS0_BASE_ADDR,
- .end = MX35_CS0_BASE_ADDR + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device mx35pdk_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &mx35pdk_flash_data,
- },
- .resource = &mx35pdk_flash_resource,
- .num_resources = 1,
-};
-
-static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-static struct platform_device *devices[] __initdata = {
- &mx35pdk_flash,
-};
-
-static const iomux_v3_cfg_t mx35pdk_pads[] __initconst = {
- /* UART1 */
- MX35_PAD_CTS1__UART1_CTS,
- MX35_PAD_RTS1__UART1_RTS,
- MX35_PAD_TXD1__UART1_TXD_MUX,
- MX35_PAD_RXD1__UART1_RXD_MUX,
- /* FEC */
- MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
- MX35_PAD_FEC_RX_DV__FEC_RX_DV,
- MX35_PAD_FEC_COL__FEC_COL,
- MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
- MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
- MX35_PAD_FEC_TX_EN__FEC_TX_EN,
- MX35_PAD_FEC_MDC__FEC_MDC,
- MX35_PAD_FEC_MDIO__FEC_MDIO,
- MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
- MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
- MX35_PAD_FEC_CRS__FEC_CRS,
- MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
- MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
- MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
- MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
- MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
- MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
- /* USBOTG */
- MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
- MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
- /* USBH1 */
- MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
- MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
- /* SDCARD */
- MX35_PAD_SD1_CMD__ESDHC1_CMD,
- MX35_PAD_SD1_CLK__ESDHC1_CLK,
- MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
- /* I2C1 */
- MX35_PAD_I2C1_CLK__I2C1_SCL,
- MX35_PAD_I2C1_DAT__I2C1_SDA,
- /* Display */
- MX35_PAD_LD0__IPU_DISPB_DAT_0,
- MX35_PAD_LD1__IPU_DISPB_DAT_1,
- MX35_PAD_LD2__IPU_DISPB_DAT_2,
- MX35_PAD_LD3__IPU_DISPB_DAT_3,
- MX35_PAD_LD4__IPU_DISPB_DAT_4,
- MX35_PAD_LD5__IPU_DISPB_DAT_5,
- MX35_PAD_LD6__IPU_DISPB_DAT_6,
- MX35_PAD_LD7__IPU_DISPB_DAT_7,
- MX35_PAD_LD8__IPU_DISPB_DAT_8,
- MX35_PAD_LD9__IPU_DISPB_DAT_9,
- MX35_PAD_LD10__IPU_DISPB_DAT_10,
- MX35_PAD_LD11__IPU_DISPB_DAT_11,
- MX35_PAD_LD12__IPU_DISPB_DAT_12,
- MX35_PAD_LD13__IPU_DISPB_DAT_13,
- MX35_PAD_LD14__IPU_DISPB_DAT_14,
- MX35_PAD_LD15__IPU_DISPB_DAT_15,
- MX35_PAD_LD16__IPU_DISPB_DAT_16,
- MX35_PAD_LD17__IPU_DISPB_DAT_17,
- MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
- MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
- MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
- MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
- MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
- MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
- MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
- /*PMIC IRQ*/
- MX35_PAD_GPIO2_0__GPIO2_0,
-};
-
-static struct regulator_consumer_supply sw1_consumers[] = {
- {
- .supply = "cpu_vcc",
- }
-};
-
-static struct regulator_consumer_supply vcam_consumers[] = {
- /* sgtl5000 */
- REGULATOR_SUPPLY("VDDA", "0-000a"),
-};
-
-static struct regulator_init_data sw1_init = {
- .constraints = {
- .name = "SW1",
- .min_uV = 600000,
- .max_uV = 1375000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .valid_modes_mask = 0,
- .always_on = 1,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
- .consumer_supplies = sw1_consumers,
-};
-
-static struct regulator_init_data sw2_init = {
- .constraints = {
- .name = "SW2",
- .always_on = 1,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data sw3_init = {
- .constraints = {
- .name = "SW3",
- .always_on = 1,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data sw4_init = {
- .constraints = {
- .name = "SW4",
- .always_on = 1,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data viohi_init = {
- .constraints = {
- .name = "VIOHI",
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data vusb_init = {
- .constraints = {
- .name = "VUSB",
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data vdig_init = {
- .constraints = {
- .name = "VDIG",
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data vpll_init = {
- .constraints = {
- .name = "VPLL",
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data vusb2_init = {
- .constraints = {
- .name = "VUSB2",
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data vvideo_init = {
- .constraints = {
- .name = "VVIDEO",
- .boot_on = 1
- }
-};
-
-static struct regulator_init_data vcam_init = {
- .constraints = {
- .name = "VCAM",
- .min_uV = 2500000,
- .max_uV = 3000000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
- .boot_on = 1
- },
- .num_consumer_supplies = ARRAY_SIZE(vcam_consumers),
- .consumer_supplies = vcam_consumers,
-};
-
-static struct regulator_init_data vgen1_init = {
- .constraints = {
- .name = "VGEN1",
- }
-};
-
-static struct regulator_init_data vgen2_init = {
- .constraints = {
- .name = "VGEN2",
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data vgen3_init = {
- .constraints = {
- .name = "VGEN3",
- }
-};
-
-static struct mc13xxx_regulator_init_data mx35_3ds_regulators[] = {
- { .id = MC13892_SW1, .init_data = &sw1_init },
- { .id = MC13892_SW2, .init_data = &sw2_init },
- { .id = MC13892_SW3, .init_data = &sw3_init },
- { .id = MC13892_SW4, .init_data = &sw4_init },
- { .id = MC13892_VIOHI, .init_data = &viohi_init },
- { .id = MC13892_VPLL, .init_data = &vpll_init },
- { .id = MC13892_VDIG, .init_data = &vdig_init },
- { .id = MC13892_VUSB2, .init_data = &vusb2_init },
- { .id = MC13892_VVIDEO, .init_data = &vvideo_init },
- { .id = MC13892_VCAM, .init_data = &vcam_init },
- { .id = MC13892_VGEN1, .init_data = &vgen1_init },
- { .id = MC13892_VGEN2, .init_data = &vgen2_init },
- { .id = MC13892_VGEN3, .init_data = &vgen3_init },
- { .id = MC13892_VUSB, .init_data = &vusb_init },
-};
-
-static struct mc13xxx_platform_data mx35_3ds_mc13892_data = {
- .flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
- .regulators = {
- .num_regulators = ARRAY_SIZE(mx35_3ds_regulators),
- .regulators = mx35_3ds_regulators,
- },
-};
-
-#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
-
-static struct i2c_board_info mx35_3ds_i2c_mc13892 = {
-
- I2C_BOARD_INFO("mc13892", 0x08),
- .platform_data = &mx35_3ds_mc13892_data,
- /* irq number is run-time assigned */
-};
-
-static void __init imx35_3ds_init_mc13892(void)
-{
- int ret = gpio_request_one(GPIO_PMIC_INT, GPIOF_DIR_IN, "pmic irq");
-
- if (ret) {
- pr_err("failed to get pmic irq: %d\n", ret);
- return;
- }
-
- mx35_3ds_i2c_mc13892.irq = gpio_to_irq(GPIO_PMIC_INT);
- i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1);
-}
-
-static int mx35_3ds_otg_init(struct platform_device *pdev)
-{
- return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
-}
-
-/* OTG config */
-static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI_WIDE,
- .workaround = FLS_USB2_WORKAROUND_ENGCM09152,
-/*
- * ENGCM09152 also requires a hardware change.
- * Please check the MX35 Chip Errata document for details.
- */
-};
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
- .init = mx35_3ds_otg_init,
- .portsc = MXC_EHCI_MODE_UTMI,
-};
-
-static int mx35_3ds_usbh_init(struct platform_device *pdev)
-{
- return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
- MXC_EHCI_INTERNAL_PHY);
-}
-
-/* USB HOST config */
-static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
- .init = mx35_3ds_usbh_init,
- .portsc = MXC_EHCI_MODE_SERIAL,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init mx35_3ds_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", mx35_3ds_otg_mode);
-
-static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
- .bitrate = 100000,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mx35_3ds_init(void)
-{
- imx35_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
-
- imx35_add_fec(NULL);
- imx35_add_imx2_wdt();
- imx35_add_mxc_rtc();
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- imx35_add_imx_uart0(&uart_pdata);
-
- if (otg_mode_host)
- imx35_add_mxc_ehci_otg(&otg_pdata);
-
- imx35_add_mxc_ehci_hs(&usb_host_pdata);
-
- if (!otg_mode_host)
- imx35_add_fsl_usb2_udc(&usb_otg_pdata);
-
- imx35_add_mxc_nand(&mx35pdk_nand_board_info);
- imx35_add_sdhci_esdhc_imx(0, NULL);
-
- imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
-
- i2c_register_board_info(
- 0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds));
-
- imx35_add_ipu_core();
-}
-
-static void __init mx35_3ds_late_init(void)
-{
- struct platform_device *imx35_fb_pdev;
-
- if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1)))
- pr_warn("Init of the debugboard failed, all "
- "devices on the debugboard are unusable.\n");
-
- imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata);
- mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev;
- platform_device_register(&mx35_3ds_lcd);
-
- imx35_3ds_init_mc13892();
-}
-
-static void __init mx35pdk_timer_init(void)
-{
- mx35_clocks_init();
-}
-
-MACHINE_START(MX35_3DS, "Freescale MX35PDK")
- /* Maintainer: Freescale Semiconductor, Inc */
- .atag_offset = 0x100,
- .map_io = mx35_map_io,
- .init_early = imx35_init_early,
- .init_irq = mx35_init_irq,
- .init_time = mx35pdk_timer_init,
- .init_machine = mx35_3ds_init,
- .init_late = mx35_3ds_late_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
deleted file mode 100644
index 27a3678..0000000
--- a/arch/arm/mach-imx/mach-pca100.c
+++ /dev/null
@@ -1,426 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/property.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-#include "ulpi.h"
-
-#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
-#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
-#define SPI1_SS0 (GPIO_PORTD + 28)
-#define SPI1_SS1 (GPIO_PORTD + 27)
-#define SD2_CD (GPIO_PORTC + 29)
-
-static const int pca100_pins[] __initconst = {
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* SDHC */
- PB4_PF_SD2_D0,
- PB5_PF_SD2_D1,
- PB6_PF_SD2_D2,
- PB7_PF_SD2_D3,
- PB8_PF_SD2_CMD,
- PB9_PF_SD2_CLK,
- SD2_CD | GPIO_GPIO | GPIO_IN,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
- /* SSI1 */
- PC20_PF_SSI1_FS,
- PC21_PF_SSI1_RXD,
- PC22_PF_SSI1_TXD,
- PC23_PF_SSI1_CLK,
- /* onboard I2C */
- PC5_PF_I2C2_SDA,
- PC6_PF_I2C2_SCL,
- /* external I2C */
- PD17_PF_I2C_DATA,
- PD18_PF_I2C_CLK,
- /* SPI1 */
- PD25_PF_CSPI1_RDY,
- PD29_PF_CSPI1_SCLK,
- PD30_PF_CSPI1_MISO,
- PD31_PF_CSPI1_MOSI,
- /* OTG */
- OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
- PC7_PF_USBOTG_DATA5,
- PC8_PF_USBOTG_DATA6,
- PC9_PF_USBOTG_DATA0,
- PC10_PF_USBOTG_DATA2,
- PC11_PF_USBOTG_DATA1,
- PC12_PF_USBOTG_DATA4,
- PC13_PF_USBOTG_DATA3,
- PE0_PF_USBOTG_NXT,
- PE1_PF_USBOTG_STP,
- PE2_PF_USBOTG_DIR,
- PE24_PF_USBOTG_CLK,
- PE25_PF_USBOTG_DATA7,
- /* USBH2 */
- USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
- PA0_PF_USBH2_CLK,
- PA1_PF_USBH2_DIR,
- PA2_PF_USBH2_DATA7,
- PA3_PF_USBH2_NXT,
- PA4_PF_USBH2_STP,
- PD19_AF_USBH2_DATA4,
- PD20_AF_USBH2_DATA3,
- PD21_AF_USBH2_DATA6,
- PD22_AF_USBH2_DATA0,
- PD23_AF_USBH2_DATA2,
- PD24_AF_USBH2_DATA1,
- PD26_AF_USBH2_DATA5,
- /* display */
- PA5_PF_LSCLK,
- PA6_PF_LD0,
- PA7_PF_LD1,
- PA8_PF_LD2,
- PA9_PF_LD3,
- PA10_PF_LD4,
- PA11_PF_LD5,
- PA12_PF_LD6,
- PA13_PF_LD7,
- PA14_PF_LD8,
- PA15_PF_LD9,
- PA16_PF_LD10,
- PA17_PF_LD11,
- PA18_PF_LD12,
- PA19_PF_LD13,
- PA20_PF_LD14,
- PA21_PF_LD15,
- PA22_PF_LD16,
- PA23_PF_LD17,
- PA26_PF_PS,
- PA28_PF_HSYNC,
- PA29_PF_VSYNC,
- PA31_PF_OE_ACD,
- /* free GPIO */
- GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN, /* GPIO0_IRQ */
- GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN, /* GPIO1_IRQ */
- GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN, /* GPIO2_IRQ */
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct mxc_nand_platform_data
-pca100_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static const struct imxi2c_platform_data pca100_i2c1_data __initconst = {
- .bitrate = 100000,
-};
-
-static const struct property_entry board_eeprom_properties[] = {
- PROPERTY_ENTRY_U32("pagesize", 32),
- { }
-};
-
-static struct i2c_board_info pca100_i2c_devices[] = {
- {
- I2C_BOARD_INFO("24c32", 0x52), /* E0=0, E1=1, E2=0 */
- .properties = board_eeprom_properties,
- }, {
- I2C_BOARD_INFO("pcf8563", 0x51),
- }, {
- I2C_BOARD_INFO("lm75", 0x4a),
- }
-};
-
-static struct spi_eeprom at25320 = {
- .name = "at25320an",
- .byte_len = 4096,
- .page_size = 32,
- .flags = EE_ADDR2,
-};
-
-static struct spi_board_info pca100_spi_board_info[] __initdata = {
- {
- .modalias = "at25",
- .max_speed_hz = 30000,
- .bus_num = 0,
- .chip_select = 1,
- .platform_data = &at25320,
- },
-};
-
-static struct gpiod_lookup_table pca100_spi0_gpiod_table = {
- .dev_id = "imx27-cspi.0", /* Actual device name for spi0 */
- .table = {
- /*
- * The i.MX27 has the i.MX21 GPIO controller, port D is
- * bank 3 and thus named "imx21-gpio.3".
- * SPI1_SS0 is GPIO_PORTD + 28
- * SPI1_SS1 is GPIO_PORTD + 27
- */
- GPIO_LOOKUP_IDX("imx21-gpio.3", 28, "cs", 0, GPIO_ACTIVE_LOW),
- GPIO_LOOKUP_IDX("imx21-gpio.3", 27, "cs", 1, GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
-{
- mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
- gpio_set_value(GPIO_PORTC + 20, 1);
- udelay(2);
- gpio_set_value(GPIO_PORTC + 20, 0);
- mxc_gpio_mode(PC20_PF_SSI1_FS);
- msleep(2);
-}
-
-static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
-{
- mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); /* FS */
- gpio_set_value(GPIO_PORTC + 20, 0);
- mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT); /* TX */
- gpio_set_value(GPIO_PORTC + 22, 0);
- mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT); /* reset */
- gpio_set_value(GPIO_PORTC + 28, 0);
- udelay(10);
- gpio_set_value(GPIO_PORTC + 28, 1);
- mxc_gpio_mode(PC20_PF_SSI1_FS);
- mxc_gpio_mode(PC22_PF_SSI1_TXD);
- msleep(2);
-}
-
-static const struct imx_ssi_platform_data pca100_ssi_pdata __initconst = {
- .ac97_reset = pca100_ac97_cold_reset,
- .ac97_warm_reset = pca100_ac97_warm_reset,
- .flags = IMX_SSI_USE_AC97,
-};
-
-static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- int ret;
-
- ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq,
- IRQF_TRIGGER_FALLING, "imx-mmc-detect", data);
- if (ret)
- printk(KERN_ERR
- "pca100: Failed to request irq for sd/mmc detection\n");
-
- return ret;
-}
-
-static void pca100_sdhc2_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
-}
-
-static const struct imxmmc_platform_data sdhc_pdata __initconst = {
- .init = pca100_sdhc2_init,
- .exit = pca100_sdhc2_exit,
-};
-
-static int otg_phy_init(struct platform_device *pdev)
-{
- gpio_set_value(OTG_PHY_CS_GPIO, 0);
-
- mdelay(10);
-
- return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
- .init = otg_phy_init,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static int usbh2_phy_init(struct platform_device *pdev)
-{
- gpio_set_value(USBH2_PHY_CS_GPIO, 0);
-
- mdelay(10);
-
- return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
- .init = usbh2_phy_init,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init pca100_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", pca100_otg_mode);
-
-/* framebuffer info */
-static struct imx_fb_videomode pca100_fb_modes[] = {
- {
- .mode = {
- .name = "EMERGING-ETV570G0DHU",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 39722, /* in ps (25.175 MHz) */
- .hsync_len = 30,
- .left_margin = 114,
- .right_margin = 16,
- .vsync_len = 3,
- .upper_margin = 32,
- .lower_margin = 0,
- },
- /*
- * TFT
- * Pixel pol active high
- * HSYNC active low
- * VSYNC active low
- * use HSYNC for ACD count
- * line clock disable while idle
- * always enable line clock even if no data
- */
- .pcr = 0xf0c08080,
- .bpp = 16,
- },
-};
-
-static const struct imx_fb_platform_data pca100_fb_data __initconst = {
- .mode = pca100_fb_modes,
- .num_modes = ARRAY_SIZE(pca100_fb_modes),
-
- .pwmr = 0x00A903FF,
- .lscr1 = 0x00120300,
- .dmacr = 0x00020010,
-};
-
-static void __init pca100_init(void)
-{
- int ret;
-
- imx27_soc_init();
-
- ret = mxc_gpio_setup_multiple_pins(pca100_pins,
- ARRAY_SIZE(pca100_pins), "PCA100");
- if (ret)
- printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
-
- imx27_add_imx_uart0(&uart_pdata);
-
- imx27_add_mxc_nand(&pca100_nand_board_info);
-
- /* only the i2c master 1 is used on this CPU card */
- i2c_register_board_info(1, pca100_i2c_devices,
- ARRAY_SIZE(pca100_i2c_devices));
-
- imx27_add_imx_i2c(1, &pca100_i2c1_data);
-
- mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN);
- mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN);
- spi_register_board_info(pca100_spi_board_info,
- ARRAY_SIZE(pca100_spi_board_info));
- imx27_add_spi_imx0(&pca100_spi0_gpiod_table);
-
- imx27_add_imx_fb(&pca100_fb_data);
-
- imx27_add_fec(NULL);
- imx27_add_imx2_wdt();
- imx27_add_mxc_w1();
-}
-
-static void __init pca100_late_init(void)
-{
- imx27_add_imx_ssi(0, &pca100_ssi_pdata);
-
- imx27_add_mxc_mmc(1, &sdhc_pdata);
-
- gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
- gpio_direction_output(OTG_PHY_CS_GPIO, 1);
- gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
- gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
-
- if (otg_mode_host) {
- otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
-
- if (otg_pdata.otg)
- imx27_add_mxc_ehci_otg(&otg_pdata);
- } else {
- gpio_set_value(OTG_PHY_CS_GPIO, 0);
- imx27_add_fsl_usb2_udc(&otg_device_pdata);
- }
-
- usbh2_pdata.otg = imx_otg_ulpi_create(
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
- if (usbh2_pdata.otg)
- imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-}
-
-static void __init pca100_timer_init(void)
-{
- mx27_clocks_init(26000000);
-}
-
-MACHINE_START(PCA100, "phyCARD-i.MX27")
- .atag_offset = 0x100,
- .map_io = mx27_map_io,
- .init_early = imx27_init_early,
- .init_irq = mx27_init_irq,
- .init_machine = pca100_init,
- .init_late = pca100_late_init,
- .init_time = pca100_timer_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
deleted file mode 100644
index c7d23e9..0000000
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ /dev/null
@@ -1,585 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2008 Sascha Hauer, Pengutronix
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/property.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-#include <linux/irq.h>
-#include <linux/can/platform/sja1000.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/gfp.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx31.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-#include "pcm037.h"
-#include "ulpi.h"
-
-static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
-
-static int __init pcm037_variant_setup(char *str)
-{
- if (!strcmp("eet", str))
- pcm037_instance = PCM037_EET;
- else if (strcmp("pcm970", str))
- pr_warn("Unknown pcm037 baseboard variant %s\n", str);
-
- return 1;
-}
-
-/* Supported values: "pcm970" (default) and "eet" */
-__setup("pcm037_variant=", pcm037_variant_setup);
-
-enum pcm037_board_variant pcm037_variant(void)
-{
- return pcm037_instance;
-}
-
-/* UART1 with RTS/CTS handshake signals */
-static unsigned int pcm037_uart1_handshake_pins[] = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
-};
-
-/* UART1 without RTS/CTS handshake signals */
-static unsigned int pcm037_uart1_pins[] = {
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
-};
-
-static unsigned int pcm037_pins[] = {
- /* I2C */
- MX31_PIN_CSPI2_MOSI__SCL,
- MX31_PIN_CSPI2_MISO__SDA,
- MX31_PIN_CSPI2_SS2__I2C3_SDA,
- MX31_PIN_CSPI2_SCLK__I2C3_SCL,
- /* SDHC1 */
- MX31_PIN_SD1_DATA3__SD1_DATA3,
- MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA1__SD1_DATA1,
- MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_CLK__SD1_CLK,
- MX31_PIN_SD1_CMD__SD1_CMD,
- IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */
- IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */
- /* SPI1 */
- MX31_PIN_CSPI1_MOSI__MOSI,
- MX31_PIN_CSPI1_MISO__MISO,
- MX31_PIN_CSPI1_SCLK__SCLK,
- MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI1_SS0__SS0,
- MX31_PIN_CSPI1_SS1__SS1,
- MX31_PIN_CSPI1_SS2__SS2,
- /* UART2 */
- MX31_PIN_TXD2__TXD2,
- MX31_PIN_RXD2__RXD2,
- MX31_PIN_CTS2__CTS2,
- MX31_PIN_RTS2__RTS2,
- /* UART3 */
- MX31_PIN_CSPI3_MOSI__RXD3,
- MX31_PIN_CSPI3_MISO__TXD3,
- MX31_PIN_CSPI3_SCLK__RTS3,
- MX31_PIN_CSPI3_SPI_RDY__CTS3,
- /* LAN9217 irq pin */
- IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
- /* Onewire */
- MX31_PIN_BATT_LINE__OWIRE,
- /* Framebuffer */
- MX31_PIN_LD0__LD0,
- MX31_PIN_LD1__LD1,
- MX31_PIN_LD2__LD2,
- MX31_PIN_LD3__LD3,
- MX31_PIN_LD4__LD4,
- MX31_PIN_LD5__LD5,
- MX31_PIN_LD6__LD6,
- MX31_PIN_LD7__LD7,
- MX31_PIN_LD8__LD8,
- MX31_PIN_LD9__LD9,
- MX31_PIN_LD10__LD10,
- MX31_PIN_LD11__LD11,
- MX31_PIN_LD12__LD12,
- MX31_PIN_LD13__LD13,
- MX31_PIN_LD14__LD14,
- MX31_PIN_LD15__LD15,
- MX31_PIN_LD16__LD16,
- MX31_PIN_LD17__LD17,
- MX31_PIN_VSYNC3__VSYNC3,
- MX31_PIN_HSYNC__HSYNC,
- MX31_PIN_FPSHIFT__FPSHIFT,
- MX31_PIN_DRDY0__DRDY0,
- MX31_PIN_D3_REV__D3_REV,
- MX31_PIN_CONTRAST__CONTRAST,
- MX31_PIN_D3_SPL__D3_SPL,
- MX31_PIN_D3_CLS__D3_CLS,
- MX31_PIN_LCS0__GPIO3_23,
- /* GPIO */
- IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
- /* OTG */
- MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
- MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
- MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
- MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
- MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
- MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
- MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
- MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
- MX31_PIN_USBOTG_CLK__USBOTG_CLK,
- MX31_PIN_USBOTG_DIR__USBOTG_DIR,
- MX31_PIN_USBOTG_NXT__USBOTG_NXT,
- MX31_PIN_USBOTG_STP__USBOTG_STP,
- /* USB host 2 */
- IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
- IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
-};
-
-static struct physmap_flash_data pcm037_flash_data = {
- .width = 2,
-};
-
-static struct resource pcm037_flash_resource = {
- .start = 0xa0000000,
- .end = 0xa1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm037_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &pcm037_flash_data,
- },
- .resource = &pcm037_flash_resource,
- .num_resources = 1,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct resource smsc911x_resources[] = {
- {
- .start = MX31_CS1_BASE_ADDR + 0x300,
- .end = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_info = {
- .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY |
- SMSC911X_SAVE_MAC_ADDRESS,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device pcm037_eth = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_info,
- },
-};
-
-static struct platdata_mtd_ram pcm038_sram_data = {
- .bankwidth = 2,
-};
-
-static struct resource pcm038_sram_resource = {
- .start = MX31_CS4_BASE_ADDR,
- .end = MX31_CS4_BASE_ADDR + 512 * 1024 - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm037_sram_device = {
- .name = "mtd-ram",
- .id = 0,
- .dev = {
- .platform_data = &pcm038_sram_data,
- },
- .num_resources = 1,
- .resource = &pcm038_sram_resource,
-};
-
-static const struct mxc_nand_platform_data
-pcm037_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static const struct imxi2c_platform_data pcm037_i2c1_data __initconst = {
- .bitrate = 100000,
-};
-
-static const struct imxi2c_platform_data pcm037_i2c2_data __initconst = {
- .bitrate = 20000,
-};
-
-static const struct property_entry board_eeprom_properties[] = {
- PROPERTY_ENTRY_U32("pagesize", 32),
- { }
-};
-
-static struct i2c_board_info pcm037_i2c_devices[] = {
- {
- I2C_BOARD_INFO("24c32", 0x52), /* E0=0, E1=1, E2=0 */
- .properties = board_eeprom_properties,
- }, {
- I2C_BOARD_INFO("pcf8563", 0x51),
- }
-};
-
-/* Not connected by default */
-#ifdef PCM970_SDHC_RW_SWITCH
-static int pcm970_sdhc1_get_ro(struct device *dev)
-{
- return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6));
-}
-#endif
-
-#define SDHC1_GPIO_WP IOMUX_TO_GPIO(MX31_PIN_SFS6)
-#define SDHC1_GPIO_DET IOMUX_TO_GPIO(MX31_PIN_SCK6)
-
-static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- int ret;
-
- ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect");
- if (ret)
- return ret;
-
- gpio_direction_input(SDHC1_GPIO_DET);
-
-#ifdef PCM970_SDHC_RW_SWITCH
- ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp");
- if (ret)
- goto err_gpio_free;
- gpio_direction_input(SDHC1_GPIO_WP);
-#endif
-
- ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq,
- IRQF_TRIGGER_FALLING, "sdhc-detect", data);
- if (ret)
- goto err_gpio_free_2;
-
- return 0;
-
-err_gpio_free_2:
-#ifdef PCM970_SDHC_RW_SWITCH
- gpio_free(SDHC1_GPIO_WP);
-err_gpio_free:
-#endif
- gpio_free(SDHC1_GPIO_DET);
-
- return ret;
-}
-
-static void pcm970_sdhc1_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), data);
- gpio_free(SDHC1_GPIO_DET);
- gpio_free(SDHC1_GPIO_WP);
-}
-
-static const struct imxmmc_platform_data sdhc_pdata __initconst = {
-#ifdef PCM970_SDHC_RW_SWITCH
- .get_ro = pcm970_sdhc1_get_ro,
-#endif
- .init = pcm970_sdhc1_init,
- .exit = pcm970_sdhc1_exit,
-};
-
-static struct platform_device *devices[] __initdata = {
- &pcm037_flash,
- &pcm037_sram_device,
-};
-
-static const struct fb_videomode fb_modedb[] = {
- {
- /* 240x320 @ 60 Hz Sharp */
- .name = "Sharp-LQ035Q7DH06-QVGA",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 185925,
- .left_margin = 9,
- .right_margin = 16,
- .upper_margin = 7,
- .lower_margin = 9,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
- FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* 240x320 @ 60 Hz */
- .name = "TX090",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 38255,
- .left_margin = 144,
- .right_margin = 0,
- .upper_margin = 7,
- .lower_margin = 40,
- .hsync_len = 96,
- .vsync_len = 1,
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* 240x320 @ 60 Hz */
- .name = "CMEL-OLED",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 185925,
- .left_margin = 9,
- .right_margin = 16,
- .upper_margin = 7,
- .lower_margin = 9,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
-};
-
-static struct mx3fb_platform_data mx3fb_pdata = {
- .name = "Sharp-LQ035Q7DH06-QVGA",
- .mode = fb_modedb,
- .num_modes = ARRAY_SIZE(fb_modedb),
-};
-
-static struct resource pcm970_sja1000_resources[] = {
- {
- .start = MX31_CS5_BASE_ADDR,
- .end = MX31_CS5_BASE_ADDR + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
- },
-};
-
-static struct sja1000_platform_data pcm970_sja1000_platform_data = {
- .osc_freq = 16000000,
- .ocr = OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
- .cdr = CDR_CBP,
-};
-
-static struct platform_device pcm970_sja1000 = {
- .name = "sja1000_platform",
- .dev = {
- .platform_data = &pcm970_sja1000_platform_data,
- },
- .resource = pcm970_sja1000_resources,
- .num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
-};
-
-static int pcm037_otg_init(struct platform_device *pdev)
-{
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
- .init = pcm037_otg_init,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static int pcm037_usbh2_init(struct platform_device *pdev)
-{
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
- .init = pcm037_usbh2_init,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init pcm037_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", pcm037_otg_mode);
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-/*
- * Board specific initialization.
- */
-static void __init pcm037_init(void)
-{
- imx31_soc_init();
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
-
- mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
- "pcm037");
-
-#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \
- | PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
- mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */
- mxc_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG); /* USBH2_DATA2 */
- mxc_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG); /* USBH2_DATA3 */
- mxc_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG); /* USBH2_DATA4 */
- mxc_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG); /* USBH2_DATA5 */
- mxc_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG); /* USBH2_DATA6 */
- mxc_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG); /* USBH2_DATA7 */
-
- if (pcm037_variant() == PCM037_EET)
- mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
- ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
- else
- mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
- ARRAY_SIZE(pcm037_uart1_handshake_pins),
- "pcm037_uart1");
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- imx31_add_imx2_wdt();
- imx31_add_imx_uart0(&uart_pdata);
- /* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */
- imx31_add_imx_uart1(&uart_pdata);
- imx31_add_imx_uart2(&uart_pdata);
-
- imx31_add_mxc_w1();
-
- /* I2C adapters and devices */
- i2c_register_board_info(1, pcm037_i2c_devices,
- ARRAY_SIZE(pcm037_i2c_devices));
-
- imx31_add_imx_i2c1(&pcm037_i2c1_data);
- imx31_add_imx_i2c2(&pcm037_i2c2_data);
-
- imx31_add_mxc_nand(&pcm037_nand_board_info);
- imx31_add_ipu_core();
- imx31_add_mx3_sdc_fb(&mx3fb_pdata);
-
- if (otg_mode_host) {
- otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (otg_pdata.otg)
- imx31_add_mxc_ehci_otg(&otg_pdata);
- }
-
- usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (usbh2_pdata.otg)
- imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-
- if (!otg_mode_host)
- imx31_add_fsl_usb2_udc(&otg_device_pdata);
-}
-
-static void __init pcm037_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-static void __init pcm037_init_late(void)
-{
- int ret;
-
- /* LAN9217 IRQ pin */
- ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
- if (!ret) {
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
- smsc911x_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
- smsc911x_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
- platform_device_register(&pcm037_eth);
- } else {
- pr_warn("could not get LAN irq gpio\n");
- }
-
- imx31_add_mxc_mmc(0, &sdhc_pdata);
-
- pcm970_sja1000_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
- pcm970_sja1000_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
- platform_device_register(&pcm970_sja1000);
-
- pcm037_eet_init_devices();
-}
-
-MACHINE_START(PCM037, "Phytec Phycore pcm037")
- /* Maintainer: Pengutronix */
- .atag_offset = 0x100,
- .map_io = mx31_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = pcm037_timer_init,
- .init_machine = pcm037_init,
- .init_late = pcm037_init_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037_eet.c b/arch/arm/mach-imx/mach-pcm037_eet.c
deleted file mode 100644
index 8b0e03a..0000000
--- a/arch/arm/mach-imx/mach-pcm037_eet.c
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- */
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach-types.h>
-
-#include "pcm037.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "iomux-mx3.h"
-
-static unsigned int pcm037_eet_pins[] = {
- /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
- IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
- /* GPIO keys */
- IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), /* 0 */
- IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), /* 1 */
- IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO), /* 2 */
- IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), /* 3 */
- IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO), /* 32 */
- IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO), /* 33 */
- IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO), /* 34 */
- IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO), /* 35 */
- IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO), /* 38 */
- IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO), /* 39 */
- IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO), /* 50 */
- IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_GPIO), /* 51 */
- IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_GPIO), /* 52 */
- IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_GPIO), /* 53 */
-
- /* LEDs */
- IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_CONFIG_GPIO), /* 44 */
- IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_GPIO), /* 45 */
- IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_GPIO), /* 55 */
- IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_GPIO), /* 56 */
-};
-
-/* SPI */
-static struct spi_board_info pcm037_spi_dev[] = {
- {
- .modalias = "dac124s085",
- .max_speed_hz = 400000,
- .bus_num = 0,
- .chip_select = 1, /* Index in pcm037_spi1_cs[] */
- .mode = SPI_CPHA,
- },
-};
-
-/* GPIO-keys input device */
-static struct gpio_keys_button pcm037_gpio_keys[] = {
- {
- .type = EV_KEY,
- .code = KEY_L,
- .gpio = 0,
- .desc = "Wheel Manual",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_A,
- .gpio = 1,
- .desc = "Wheel AF",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_V,
- .gpio = 2,
- .desc = "Wheel View",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_M,
- .gpio = 3,
- .desc = "Wheel Menu",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_UP,
- .gpio = 32,
- .desc = "Nav Pad Up",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_RIGHT,
- .gpio = 33,
- .desc = "Nav Pad Right",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_DOWN,
- .gpio = 34,
- .desc = "Nav Pad Down",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_LEFT,
- .gpio = 35,
- .desc = "Nav Pad Left",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_ENTER,
- .gpio = 38,
- .desc = "Nav Pad Ok",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_O,
- .gpio = 39,
- .desc = "Wheel Off",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = BTN_FORWARD,
- .gpio = 50,
- .desc = "Focus Forward",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = BTN_BACK,
- .gpio = 51,
- .desc = "Focus Backward",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = BTN_MIDDLE,
- .gpio = 52,
- .desc = "Release Half",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = BTN_EXTRA,
- .gpio = 53,
- .desc = "Release Full",
- .wakeup = 0,
- },
-};
-
-static const struct gpio_keys_platform_data
- pcm037_gpio_keys_platform_data __initconst = {
- .buttons = pcm037_gpio_keys,
- .nbuttons = ARRAY_SIZE(pcm037_gpio_keys),
- .rep = 0, /* No auto-repeat */
-};
-
-int __init pcm037_eet_init_devices(void)
-{
- if (pcm037_variant() != PCM037_EET)
- return 0;
-
- mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
- ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
-
- /* SPI */
- spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
- imx31_add_spi_imx0(NULL);
-
- imx_add_gpio_keys(&pcm037_gpio_keys_platform_data);
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
deleted file mode 100644
index 017a501..0000000
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ /dev/null
@@ -1,412 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2009 Sascha Hauer, Pengutronix
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/smc911x.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/property.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx35.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx35.h"
-#include "ulpi.h"
-
-static const struct fb_videomode fb_modedb[] = {
- {
- /* 240x320 @ 60 Hz */
- .name = "Sharp-LQ035Q7",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 185925,
- .left_margin = 9,
- .right_margin = 16,
- .upper_margin = 7,
- .lower_margin = 9,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* 240x320 @ 60 Hz */
- .name = "TX090",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 38255,
- .left_margin = 144,
- .right_margin = 0,
- .upper_margin = 7,
- .lower_margin = 40,
- .hsync_len = 96,
- .vsync_len = 1,
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
- .name = "Sharp-LQ035Q7",
- .mode = fb_modedb,
- .num_modes = ARRAY_SIZE(fb_modedb),
-};
-
-static struct physmap_flash_data pcm043_flash_data = {
- .width = 2,
-};
-
-static struct resource pcm043_flash_resource = {
- .start = 0xa0000000,
- .end = 0xa1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm043_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &pcm043_flash_data,
- },
- .resource = &pcm043_flash_resource,
- .num_resources = 1,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = {
- .bitrate = 50000,
-};
-
-static const struct property_entry board_eeprom_properties[] = {
- PROPERTY_ENTRY_U32("pagesize", 32),
- { }
-};
-
-static struct i2c_board_info pcm043_i2c_devices[] = {
- {
- I2C_BOARD_INFO("24c32", 0x52), /* E0=0, E1=1, E2=0 */
- .properties = board_eeprom_properties,
- }, {
- I2C_BOARD_INFO("pcf8563", 0x51),
- },
-};
-
-static struct platform_device *devices[] __initdata = {
- &pcm043_flash,
-};
-
-static const iomux_v3_cfg_t pcm043_pads[] __initconst = {
- /* UART1 */
- MX35_PAD_CTS1__UART1_CTS,
- MX35_PAD_RTS1__UART1_RTS,
- MX35_PAD_TXD1__UART1_TXD_MUX,
- MX35_PAD_RXD1__UART1_RXD_MUX,
- /* UART2 */
- MX35_PAD_CTS2__UART2_CTS,
- MX35_PAD_RTS2__UART2_RTS,
- MX35_PAD_TXD2__UART2_TXD_MUX,
- MX35_PAD_RXD2__UART2_RXD_MUX,
- /* FEC */
- MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
- MX35_PAD_FEC_RX_DV__FEC_RX_DV,
- MX35_PAD_FEC_COL__FEC_COL,
- MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
- MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
- MX35_PAD_FEC_TX_EN__FEC_TX_EN,
- MX35_PAD_FEC_MDC__FEC_MDC,
- MX35_PAD_FEC_MDIO__FEC_MDIO,
- MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
- MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
- MX35_PAD_FEC_CRS__FEC_CRS,
- MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
- MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
- MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
- MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
- MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
- MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
- /* I2C1 */
- MX35_PAD_I2C1_CLK__I2C1_SCL,
- MX35_PAD_I2C1_DAT__I2C1_SDA,
- /* Display */
- MX35_PAD_LD0__IPU_DISPB_DAT_0,
- MX35_PAD_LD1__IPU_DISPB_DAT_1,
- MX35_PAD_LD2__IPU_DISPB_DAT_2,
- MX35_PAD_LD3__IPU_DISPB_DAT_3,
- MX35_PAD_LD4__IPU_DISPB_DAT_4,
- MX35_PAD_LD5__IPU_DISPB_DAT_5,
- MX35_PAD_LD6__IPU_DISPB_DAT_6,
- MX35_PAD_LD7__IPU_DISPB_DAT_7,
- MX35_PAD_LD8__IPU_DISPB_DAT_8,
- MX35_PAD_LD9__IPU_DISPB_DAT_9,
- MX35_PAD_LD10__IPU_DISPB_DAT_10,
- MX35_PAD_LD11__IPU_DISPB_DAT_11,
- MX35_PAD_LD12__IPU_DISPB_DAT_12,
- MX35_PAD_LD13__IPU_DISPB_DAT_13,
- MX35_PAD_LD14__IPU_DISPB_DAT_14,
- MX35_PAD_LD15__IPU_DISPB_DAT_15,
- MX35_PAD_LD16__IPU_DISPB_DAT_16,
- MX35_PAD_LD17__IPU_DISPB_DAT_17,
- MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
- MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
- MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
- MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
- MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
- MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
- MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
- /* gpio */
- MX35_PAD_ATA_CS0__GPIO2_6,
- /* USB host */
- MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
- MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
- /* SSI */
- MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
- MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
- MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
- MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
- /* CAN2 */
- MX35_PAD_TX5_RX0__CAN2_TXCAN,
- MX35_PAD_TX4_RX1__CAN2_RXCAN,
- /* esdhc */
- MX35_PAD_SD1_CMD__ESDHC1_CMD,
- MX35_PAD_SD1_CLK__ESDHC1_CLK,
- MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
- MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */
- MX35_PAD_ATA_DATA11__GPIO2_24, /* CardDetect */
-};
-
-#define AC97_GPIO_TXFS IMX_GPIO_NR(2, 31)
-#define AC97_GPIO_TXD IMX_GPIO_NR(2, 28)
-#define AC97_GPIO_RESET IMX_GPIO_NR(2, 0)
-
-static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
-{
- iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
- iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
- int ret;
-
- ret = gpio_request(AC97_GPIO_TXFS, "SSI");
- if (ret) {
- printk("failed to get GPIO_TXFS: %d\n", ret);
- return;
- }
-
- mxc_iomux_v3_setup_pad(txfs_gpio);
-
- /* warm reset */
- gpio_direction_output(AC97_GPIO_TXFS, 1);
- udelay(2);
- gpio_set_value(AC97_GPIO_TXFS, 0);
-
- gpio_free(AC97_GPIO_TXFS);
- mxc_iomux_v3_setup_pad(txfs);
-}
-
-static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
-{
- iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
- iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
- iomux_v3_cfg_t txd_gpio = MX35_PAD_STXD4__GPIO2_28;
- iomux_v3_cfg_t txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
- iomux_v3_cfg_t reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
- int ret;
-
- ret = gpio_request(AC97_GPIO_TXFS, "SSI");
- if (ret)
- goto err1;
-
- ret = gpio_request(AC97_GPIO_TXD, "SSI");
- if (ret)
- goto err2;
-
- ret = gpio_request(AC97_GPIO_RESET, "SSI");
- if (ret)
- goto err3;
-
- mxc_iomux_v3_setup_pad(txfs_gpio);
- mxc_iomux_v3_setup_pad(txd_gpio);
- mxc_iomux_v3_setup_pad(reset_gpio);
-
- gpio_direction_output(AC97_GPIO_TXFS, 0);
- gpio_direction_output(AC97_GPIO_TXD, 0);
-
- /* cold reset */
- gpio_direction_output(AC97_GPIO_RESET, 0);
- udelay(10);
- gpio_direction_output(AC97_GPIO_RESET, 1);
-
- mxc_iomux_v3_setup_pad(txd);
- mxc_iomux_v3_setup_pad(txfs);
-
- gpio_free(AC97_GPIO_RESET);
-err3:
- gpio_free(AC97_GPIO_TXD);
-err2:
- gpio_free(AC97_GPIO_TXFS);
-err1:
- if (ret)
- printk("%s failed with %d\n", __func__, ret);
- mdelay(1);
-}
-
-static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = {
- .ac97_reset = pcm043_ac97_cold_reset,
- .ac97_warm_reset = pcm043_ac97_warm_reset,
- .flags = IMX_SSI_USE_AC97,
-};
-
-static const struct mxc_nand_platform_data
-pcm037_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static int pcm043_otg_init(struct platform_device *pdev)
-{
- return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
- .init = pcm043_otg_init,
- .portsc = MXC_EHCI_MODE_UTMI,
-};
-
-static int pcm043_usbh1_init(struct platform_device *pdev)
-{
- return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
- MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
-}
-
-static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
- .init = pcm043_usbh1_init,
- .portsc = MXC_EHCI_MODE_SERIAL,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init pcm043_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", pcm043_otg_mode);
-
-static struct esdhc_platform_data sd1_pdata = {
- .wp_type = ESDHC_WP_GPIO,
- .cd_type = ESDHC_CD_GPIO,
-};
-
-static struct gpiod_lookup_table sd1_gpio_table = {
- .dev_id = "sdhci-esdhc-imx35.0",
- .table = {
- /* Card detect: bank 2 offset 24 */
- GPIO_LOOKUP("imx35-gpio.2", 24, "cd", GPIO_ACTIVE_LOW),
- /* Write protect: bank 2 offset 23 */
- GPIO_LOOKUP("imx35-gpio.2", 23, "wp", GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-/*
- * Board specific initialization.
- */
-static void __init pcm043_init(void)
-{
- imx35_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
-
- imx35_add_fec(NULL);
- platform_add_devices(devices, ARRAY_SIZE(devices));
- imx35_add_imx2_wdt();
-
- imx35_add_imx_uart0(&uart_pdata);
- imx35_add_mxc_nand(&pcm037_nand_board_info);
-
- imx35_add_imx_uart1(&uart_pdata);
-
- i2c_register_board_info(0, pcm043_i2c_devices,
- ARRAY_SIZE(pcm043_i2c_devices));
-
- imx35_add_imx_i2c0(&pcm043_i2c0_data);
-
- imx35_add_ipu_core();
- imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-
- if (otg_mode_host) {
- otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (otg_pdata.otg)
- imx35_add_mxc_ehci_otg(&otg_pdata);
- }
- imx35_add_mxc_ehci_hs(&usbh1_pdata);
-
- if (!otg_mode_host)
- imx35_add_fsl_usb2_udc(&otg_device_pdata);
-
- imx35_add_flexcan1();
-}
-
-static void __init pcm043_late_init(void)
-{
- imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
-
- gpiod_add_lookup_table(&sd1_gpio_table);
- imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
-}
-
-static void __init pcm043_timer_init(void)
-{
- mx35_clocks_init();
-}
-
-MACHINE_START(PCM043, "Phytec Phycore pcm043")
- /* Maintainer: Pengutronix */
- .atag_offset = 0x100,
- .map_io = mx35_map_io,
- .init_early = imx35_init_early,
- .init_irq = mx35_init_irq,
- .init_time = pcm043_timer_init,
- .init_machine = pcm043_init,
- .init_late = pcm043_late_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
deleted file mode 100644
index 5b362da..0000000
--- a/arch/arm/mach-imx/mach-qong.c
+++ /dev/null
@@ -1,262 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/memory.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/platnand.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-
-#include "common.h"
-#include "devices-imx31.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-
-/* FPGA defines */
-#define QONG_FPGA_VERSION(major, minor, rev) \
- (((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
-
-#define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR
-#define QONG_FPGA_PERIPH_SIZE (1 << 24)
-
-#define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR
-#define QONG_FPGA_CTRL_SIZE 0x10
-/* FPGA control registers */
-#define QONG_FPGA_CTRL_VERSION 0x00
-
-#define QONG_DNET_ID 1
-#define QONG_DNET_BASEADDR \
- (QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
-#define QONG_DNET_SIZE 0x00001000
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int uart_pins[] = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1
-};
-
-static inline void __init mxc_init_imx_uart(void)
-{
- mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
- "uart-0");
- imx31_add_imx_uart0(&uart_pdata);
-}
-
-static struct resource dnet_resources[] = {
- {
- .name = "dnet-memory",
- .start = QONG_DNET_BASEADDR,
- .end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }, {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dnet_device = {
- .name = "dnet",
- .id = -1,
- .num_resources = ARRAY_SIZE(dnet_resources),
- .resource = dnet_resources,
-};
-
-static int __init qong_init_dnet(void)
-{
- int ret;
-
- dnet_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1));
- dnet_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1));
- ret = platform_device_register(&dnet_device);
- return ret;
-}
-
-/* MTD NOR flash */
-
-static struct physmap_flash_data qong_flash_data = {
- .width = 2,
-};
-
-static struct resource qong_flash_resource = {
- .start = MX31_CS0_BASE_ADDR,
- .end = MX31_CS0_BASE_ADDR + SZ_128M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device qong_nor_mtd_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &qong_flash_data,
- },
- .resource = &qong_flash_resource,
- .num_resources = 1,
-};
-
-static void qong_init_nor_mtd(void)
-{
- (void)platform_device_register(&qong_nor_mtd_device);
-}
-
-/*
- * Hardware specific access to control-lines
- */
-static void qong_nand_cmd_ctrl(struct nand_chip *nand_chip, int cmd,
- unsigned int ctrl)
-{
- if (cmd == NAND_CMD_NONE)
- return;
-
- if (ctrl & NAND_CLE)
- writeb(cmd, nand_chip->legacy.IO_ADDR_W + (1 << 24));
- else
- writeb(cmd, nand_chip->legacy.IO_ADDR_W + (1 << 23));
-}
-
-/*
- * Read the Device Ready pin.
- */
-static int qong_nand_device_ready(struct nand_chip *chip)
-{
- return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB));
-}
-
-static void qong_nand_select_chip(struct nand_chip *chip, int cs)
-{
- if (cs >= 0)
- gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
- else
- gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1);
-}
-
-static struct platform_nand_data qong_nand_data = {
- .chip = {
- .nr_chips = 1,
- .chip_delay = 20,
- .options = 0,
- },
- .ctrl = {
- .cmd_ctrl = qong_nand_cmd_ctrl,
- .dev_ready = qong_nand_device_ready,
- .select_chip = qong_nand_select_chip,
- }
-};
-
-static struct resource qong_nand_resource = {
- .start = MX31_CS3_BASE_ADDR,
- .end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device qong_nand_device = {
- .name = "gen_nand",
- .id = -1,
- .dev = {
- .platform_data = &qong_nand_data,
- },
- .num_resources = 1,
- .resource = &qong_nand_resource,
-};
-
-static void __init qong_init_nand_mtd(void)
-{
- /* init CS */
- imx_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3)));
- imx_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3)));
- imx_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3)));
-
- mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
-
- /* enable pin */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO));
- if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable"))
- gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
-
- /* ready/busy pin */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO));
- if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy"))
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB));
-
- /* write protect pin */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO));
- if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp"))
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B));
-
- platform_device_register(&qong_nand_device);
-}
-
-static void __init qong_init_fpga(void)
-{
- void __iomem *regs;
- u32 fpga_ver;
-
- regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE);
- if (!regs) {
- printk(KERN_ERR "%s: failed to map registers, aborting.\n",
- __func__);
- return;
- }
-
- fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION);
- iounmap(regs);
- printk(KERN_INFO "Qong FPGA version %d.%d.%d\n",
- (fpga_ver & 0xF000) >> 12,
- (fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF);
- if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) {
- printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based "
- "devices won't be registered!\n");
- return;
- }
-
- /* register FPGA-based devices */
- qong_init_nand_mtd();
- qong_init_dnet();
-}
-
-/*
- * Board specific initialization.
- */
-static void __init qong_init(void)
-{
- imx31_soc_init();
-
- mxc_init_imx_uart();
- qong_init_nor_mtd();
- imx31_add_imx2_wdt();
-}
-
-static void __init qong_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
- /* Maintainer: DENX Software Engineering GmbH */
- .atag_offset = 0x100,
- .map_io = mx31_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = qong_timer_init,
- .init_machine = qong_init,
- .init_late = qong_init_fpga,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
deleted file mode 100644
index fae5a41..0000000
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ /dev/null
@@ -1,306 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
- * Copyright 2010 Creative Product Design
- *
- * Derived from mx35 3stack.
- * Original author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <linux/i2c.h>
-#include <linux/mfd/mc13xxx.h>
-
-#include "common.h"
-#include "devices-imx35.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx35.h"
-
-#define GPIO_LCDPWR IMX_GPIO_NR(1, 2)
-#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
-
-#define GPIO_BUTTON1 IMX_GPIO_NR(1, 4)
-#define GPIO_BUTTON2 IMX_GPIO_NR(1, 5)
-#define GPIO_BUTTON3 IMX_GPIO_NR(1, 7)
-#define GPIO_BUTTON4 IMX_GPIO_NR(1, 8)
-#define GPIO_BUTTON5 IMX_GPIO_NR(1, 9)
-#define GPIO_BUTTON6 IMX_GPIO_NR(1, 10)
-#define GPIO_BUTTON7 IMX_GPIO_NR(1, 11)
-#define GPIO_BUTTON8 IMX_GPIO_NR(1, 12)
-
-static const struct fb_videomode fb_modedb[] = {
- {
- /* 800x480 @ 60 Hz */
- .name = "PT0708048",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = KHZ2PICOS(33260),
- .left_margin = 50,
- .right_margin = 156,
- .upper_margin = 10,
- .lower_margin = 10,
- .hsync_len = 1, /* note: DE only display */
- .vsync_len = 1, /* note: DE only display */
- .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* 800x480 @ 60 Hz */
- .name = "CTP-CLAA070LC0ACW",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = KHZ2PICOS(27000),
- .left_margin = 50,
- .right_margin = 50, /* whole line should have 900 clocks */
- .upper_margin = 10,
- .lower_margin = 10, /* whole frame should have 500 lines */
- .hsync_len = 1, /* note: DE only display */
- .vsync_len = 1, /* note: DE only display */
- .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
- .name = "PT0708048",
- .mode = fb_modedb,
- .num_modes = ARRAY_SIZE(fb_modedb),
-};
-
-static struct physmap_flash_data vpr200_flash_data = {
- .width = 2,
-};
-
-static struct resource vpr200_flash_resource = {
- .start = MX35_CS0_BASE_ADDR,
- .end = MX35_CS0_BASE_ADDR + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device vpr200_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &vpr200_flash_data,
- },
- .resource = &vpr200_flash_resource,
- .num_resources = 1,
-};
-
-static const struct mxc_nand_platform_data
- vpr200_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-#define VPR_KEY_DEBOUNCE 500
-static struct gpio_keys_button vpr200_gpio_keys_table[] = {
- {KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE},
- {KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE},
- {KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE},
- {KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE},
- {KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE},
- {KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE},
- {KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE},
- {KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
-};
-
-static const struct gpio_keys_platform_data
- vpr200_gpio_keys_data __initconst = {
- .buttons = vpr200_gpio_keys_table,
- .nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
-};
-
-static struct mc13xxx_platform_data vpr200_pmic = {
- .flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
-};
-
-static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = {
- .bitrate = 50000,
-};
-
-static struct i2c_board_info vpr200_i2c_devices[] = {
- {
- I2C_BOARD_INFO("24c02", 0x50), /* E0=0, E1=0, E2=0 */
- }, {
- I2C_BOARD_INFO("mc13892", 0x08),
- .platform_data = &vpr200_pmic,
- /* irq number is run-time assigned */
- }
-};
-
-static const iomux_v3_cfg_t vpr200_pads[] __initconst = {
- /* UART1 */
- MX35_PAD_TXD1__UART1_TXD_MUX,
- MX35_PAD_RXD1__UART1_RXD_MUX,
- /* UART3 */
- MX35_PAD_ATA_DATA10__UART3_RXD_MUX,
- MX35_PAD_ATA_DATA11__UART3_TXD_MUX,
- /* FEC */
- MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
- MX35_PAD_FEC_RX_DV__FEC_RX_DV,
- MX35_PAD_FEC_COL__FEC_COL,
- MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
- MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
- MX35_PAD_FEC_TX_EN__FEC_TX_EN,
- MX35_PAD_FEC_MDC__FEC_MDC,
- MX35_PAD_FEC_MDIO__FEC_MDIO,
- MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
- MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
- MX35_PAD_FEC_CRS__FEC_CRS,
- MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
- MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
- MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
- MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
- MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
- MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
- /* Display */
- MX35_PAD_LD0__IPU_DISPB_DAT_0,
- MX35_PAD_LD1__IPU_DISPB_DAT_1,
- MX35_PAD_LD2__IPU_DISPB_DAT_2,
- MX35_PAD_LD3__IPU_DISPB_DAT_3,
- MX35_PAD_LD4__IPU_DISPB_DAT_4,
- MX35_PAD_LD5__IPU_DISPB_DAT_5,
- MX35_PAD_LD6__IPU_DISPB_DAT_6,
- MX35_PAD_LD7__IPU_DISPB_DAT_7,
- MX35_PAD_LD8__IPU_DISPB_DAT_8,
- MX35_PAD_LD9__IPU_DISPB_DAT_9,
- MX35_PAD_LD10__IPU_DISPB_DAT_10,
- MX35_PAD_LD11__IPU_DISPB_DAT_11,
- MX35_PAD_LD12__IPU_DISPB_DAT_12,
- MX35_PAD_LD13__IPU_DISPB_DAT_13,
- MX35_PAD_LD14__IPU_DISPB_DAT_14,
- MX35_PAD_LD15__IPU_DISPB_DAT_15,
- MX35_PAD_LD16__IPU_DISPB_DAT_16,
- MX35_PAD_LD17__IPU_DISPB_DAT_17,
- MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
- MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
- MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
- /* LCD Enable */
- MX35_PAD_D3_VSYNC__GPIO1_2,
- /* USBOTG */
- MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
- MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
- /* SDCARD */
- MX35_PAD_SD1_CMD__ESDHC1_CMD,
- MX35_PAD_SD1_CLK__ESDHC1_CLK,
- MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
- /* PMIC */
- MX35_PAD_GPIO2_0__GPIO2_0,
- /* GPIO keys */
- MX35_PAD_SCKR__GPIO1_4,
- MX35_PAD_COMPARE__GPIO1_5,
- MX35_PAD_SCKT__GPIO1_7,
- MX35_PAD_FST__GPIO1_8,
- MX35_PAD_HCKT__GPIO1_9,
- MX35_PAD_TX5_RX0__GPIO1_10,
- MX35_PAD_TX4_RX1__GPIO1_11,
- MX35_PAD_TX3_RX2__GPIO1_12,
-};
-
-/* USB Device config */
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI,
- .workaround = FLS_USB2_WORKAROUND_ENGCM09152,
-};
-
-static int vpr200_usbh_init(struct platform_device *pdev)
-{
- return mx35_initialize_usb_hw(pdev->id,
- MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
-}
-
-/* USB HOST config */
-static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
- .init = vpr200_usbh_init,
- .portsc = MXC_EHCI_MODE_SERIAL,
-};
-
-static struct platform_device *devices[] __initdata = {
- &vpr200_flash,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init vpr200_board_init(void)
-{
- imx35_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
-
- imx35_add_fec(NULL);
- imx35_add_imx2_wdt();
-
- imx35_add_imx_uart0(NULL);
- imx35_add_imx_uart2(NULL);
-
- imx35_add_ipu_core();
- imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-
- imx35_add_fsl_usb2_udc(&otg_device_pdata);
- imx35_add_mxc_ehci_hs(&usb_host_pdata);
-
- imx35_add_mxc_nand(&vpr200_nand_board_info);
- imx35_add_sdhci_esdhc_imx(0, NULL);
-}
-
-static void __init vpr200_late_init(void)
-{
- imx_add_gpio_keys(&vpr200_gpio_keys_data);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR"))
- printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n");
- else
- gpio_direction_output(GPIO_LCDPWR, 0);
-
- if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT"))
- printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n");
- else
- gpio_direction_input(GPIO_PMIC_INT);
-
- vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT);
- i2c_register_board_info(0, vpr200_i2c_devices,
- ARRAY_SIZE(vpr200_i2c_devices));
-
- imx35_add_imx_i2c0(&vpr200_i2c0_data);
-}
-
-static void __init vpr200_timer_init(void)
-{
- mx35_clocks_init();
-}
-
-MACHINE_START(VPR200, "VPR200")
- /* Maintainer: Creative Product Design */
- .map_io = mx35_map_io,
- .init_early = imx35_init_early,
- .init_irq = mx35_init_irq,
- .init_time = vpr200_timer_init,
- .init_machine = vpr200_board_init,
- .init_late = vpr200_late_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
deleted file mode 100644
index b834026..0000000
--- a/arch/arm/mach-imx/mm-imx21.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-imx/mm-imx21.c
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/pinctrl/machine.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices/devices-common.h"
-#include "hardware.h"
-#include "iomux-v1.h"
-
-/* MX21 memory map definition */
-static struct map_desc imx21_io_desc[] __initdata = {
- /*
- * this fixed mapping covers:
- * - AIPI1
- * - AIPI2
- * - AITC
- * - ROM Patch
- * - and some reserved space
- */
- imx_map_entry(MX21, AIPI, MT_DEVICE),
- /*
- * this fixed mapping covers:
- * - CSI
- * - ATA
- */
- imx_map_entry(MX21, SAHB1, MT_DEVICE),
- /*
- * this fixed mapping covers:
- * - EMI
- */
- imx_map_entry(MX21, X_MEMC, MT_DEVICE),
-};
-
-/*
- * Initialize the memory map. It is called during the
- * system startup to create static physical to virtual
- * memory map for the IO modules.
- */
-void __init mx21_map_io(void)
-{
- iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc));
-}
-
-void __init imx21_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX21);
- imx_iomuxv1_init(MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR),
- MX21_NUM_GPIO_PORT);
-}
-
-void __init mx21_init_irq(void)
-{
- mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
-}
-
-static const struct resource imx21_audmux_res[] __initconst = {
- DEFINE_RES_MEM(MX21_AUDMUX_BASE_ADDR, SZ_4K),
-};
-
-void __init imx21_soc_init(void)
-{
- mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
- mxc_device_init();
-
- mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
-
- pinctrl_provide_dummies();
- imx_add_imx_dma("imx21-dma", MX21_DMA_BASE_ADDR, MX21_INT_DMACH0);
- platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res,
- ARRAY_SIZE(imx21_audmux_res));
-}
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
deleted file mode 100644
index 2717614..0000000
--- a/arch/arm/mach-imx/mm-imx27.c
+++ /dev/null
@@ -1,88 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-imx/mm-imx27.c
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/pinctrl/machine.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices/devices-common.h"
-#include "hardware.h"
-#include "iomux-v1.h"
-
-/* MX27 memory map definition */
-static struct map_desc imx27_io_desc[] __initdata = {
- /*
- * this fixed mapping covers:
- * - AIPI1
- * - AIPI2
- * - AITC
- * - ROM Patch
- * - and some reserved space
- */
- imx_map_entry(MX27, AIPI, MT_DEVICE),
- /*
- * this fixed mapping covers:
- * - CSI
- * - ATA
- */
- imx_map_entry(MX27, SAHB1, MT_DEVICE),
- /*
- * this fixed mapping covers:
- * - EMI
- */
- imx_map_entry(MX27, X_MEMC, MT_DEVICE),
-};
-
-/*
- * Initialize the memory map. It is called during the
- * system startup to create static physical to virtual
- * memory map for the IO modules.
- */
-void __init mx27_map_io(void)
-{
- iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
-}
-
-void __init imx27_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX27);
- imx_iomuxv1_init(MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR),
- MX27_NUM_GPIO_PORT);
-}
-
-void __init mx27_init_irq(void)
-{
- mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
-}
-
-static const struct resource imx27_audmux_res[] __initconst = {
- DEFINE_RES_MEM(MX27_AUDMUX_BASE_ADDR, SZ_4K),
-};
-
-void __init imx27_soc_init(void)
-{
- mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
- mxc_device_init();
-
- /* i.mx27 has the i.mx21 type gpio */
- mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
-
- pinctrl_provide_dummies();
- imx_add_imx_dma("imx27-dma", MX27_DMA_BASE_ADDR, MX27_INT_DMACH0);
- /* imx27 has the imx21 type audmux */
- platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res,
- ARRAY_SIZE(imx27_audmux_res));
-
- imx27_pm_init();
-}
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index ea2d58a..5056438 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -11,6 +11,7 @@
#include <linux/init.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/of_address.h>
#include <linux/pinctrl/machine.h>
#include <asm/system_misc.h>
@@ -19,9 +20,7 @@
#include "common.h"
#include "crmregs-imx3.h"
-#include "devices/devices-common.h"
#include "hardware.h"
-#include "iomux-v3.h"
void __iomem *mx3_ccm_base;
@@ -71,40 +70,6 @@ static void __iomem *imx3_ioremap_caller(phys_addr_t phys_addr, size_t size,
return __arm_ioremap_caller(phys_addr, size, mtype, caller);
}
-static void __init imx3_init_l2x0(void)
-{
-#ifdef CONFIG_CACHE_L2X0
- void __iomem *l2x0_base;
- void __iomem *clkctl_base;
-
-/*
- * First of all, we must repair broken chip settings. There are some
- * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
- * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
- * Workaraound is to setup the correct register setting prior enabling the
- * L2 cache. This should not hurt already working CPUs, as they are using the
- * same value.
- */
-#define L2_MEM_VAL 0x10
-
- clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
- if (clkctl_base != NULL) {
- writel(0x00000515, clkctl_base + L2_MEM_VAL);
- iounmap(clkctl_base);
- } else {
- pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
- }
-
- l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
- if (!l2x0_base) {
- printk(KERN_ERR "remapping L2 cache area failed\n");
- return;
- }
-
- l2x0_init(l2x0_base, 0x00030024, 0x00000000);
-#endif
-}
-
#ifdef CONFIG_SOC_IMX31
static struct map_desc mx31_io_desc[] __initdata = {
imx_map_entry(MX31, X_MEMC, MT_DEVICE),
@@ -135,70 +100,26 @@ static void imx31_idle(void)
void __init imx31_init_early(void)
{
+ struct device_node *np;
+
mxc_set_cpu_type(MXC_CPU_MX31);
arch_ioremap_caller = imx3_ioremap_caller;
arm_pm_idle = imx31_idle;
- mx3_ccm_base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm");
+ mx3_ccm_base = of_iomap(np, 0);
+ BUG_ON(!mx3_ccm_base);
}
void __init mx31_init_irq(void)
{
- mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
-}
+ void __iomem *avic_base;
+ struct device_node *np;
-static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
- .per_2_per_addr = 1677,
-};
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx31-avic");
+ avic_base = of_iomap(np, 0);
+ BUG_ON(!avic_base);
-static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
- .ap_2_ap_addr = 423,
- .ap_2_bp_addr = 829,
- .bp_2_ap_addr = 1029,
-};
-
-static struct sdma_platform_data imx31_sdma_pdata __initdata = {
- .fw_name = "sdma-imx31-to2.bin",
- .script_addrs = &imx31_to2_sdma_script,
-};
-
-static const struct resource imx31_audmux_res[] __initconst = {
- DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
-static const struct resource imx31_rnga_res[] __initconst = {
- DEFINE_RES_MEM(MX31_RNGA_BASE_ADDR, SZ_16K),
-};
-
-void __init imx31_soc_init(void)
-{
- int to_version = mx31_revision() >> 4;
-
- imx3_init_l2x0();
-
- mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
- mxc_device_init();
-
- mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
- mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
- mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
-
- pinctrl_provide_dummies();
-
- if (to_version == 1) {
- strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
- strlen(imx31_sdma_pdata.fw_name));
- imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
- }
-
- imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
-
- imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS1_BASE_ADDR));
- imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS2_BASE_ADDR));
-
- platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res,
- ARRAY_SIZE(imx31_audmux_res));
- platform_device_register_simple("mxc_rnga", -1, imx31_rnga_res,
- ARRAY_SIZE(imx31_rnga_res));
+ mxc_init_irq(avic_base);
}
#endif /* ifdef CONFIG_SOC_IMX31 */
@@ -228,85 +149,25 @@ static void imx35_idle(void)
void __init imx35_init_early(void)
{
+ struct device_node *np;
+
mxc_set_cpu_type(MXC_CPU_MX35);
- mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
arm_pm_idle = imx35_idle;
arch_ioremap_caller = imx3_ioremap_caller;
- mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx35-ccm");
+ mx3_ccm_base = of_iomap(np, 0);
+ BUG_ON(!mx3_ccm_base);
}
void __init mx35_init_irq(void)
{
- mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
-}
+ void __iomem *avic_base;
+ struct device_node *np;
-static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
- .ap_2_ap_addr = 642,
- .uart_2_mcu_addr = 817,
- .mcu_2_app_addr = 747,
- .uartsh_2_mcu_addr = 1183,
- .per_2_shp_addr = 1033,
- .mcu_2_shp_addr = 961,
- .ata_2_mcu_addr = 1333,
- .mcu_2_ata_addr = 1252,
- .app_2_mcu_addr = 683,
- .shp_2_per_addr = 1111,
- .shp_2_mcu_addr = 892,
-};
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx35-avic");
+ avic_base = of_iomap(np, 0);
+ BUG_ON(!avic_base);
-static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
- .ap_2_ap_addr = 729,
- .uart_2_mcu_addr = 904,
- .per_2_app_addr = 1597,
- .mcu_2_app_addr = 834,
- .uartsh_2_mcu_addr = 1270,
- .per_2_shp_addr = 1120,
- .mcu_2_shp_addr = 1048,
- .ata_2_mcu_addr = 1429,
- .mcu_2_ata_addr = 1339,
- .app_2_per_addr = 1531,
- .app_2_mcu_addr = 770,
- .shp_2_per_addr = 1198,
- .shp_2_mcu_addr = 979,
-};
-
-static struct sdma_platform_data imx35_sdma_pdata __initdata = {
- .fw_name = "sdma-imx35-to2.bin",
- .script_addrs = &imx35_to2_sdma_script,
-};
-
-static const struct resource imx35_audmux_res[] __initconst = {
- DEFINE_RES_MEM(MX35_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
-void __init imx35_soc_init(void)
-{
- int to_version = mx35_revision() >> 4;
-
- imx3_init_l2x0();
-
- mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
- mxc_device_init();
-
- mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
- mxc_register_gpio("imx35-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
- mxc_register_gpio("imx35-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
-
- pinctrl_provide_dummies();
- if (to_version == 1) {
- strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
- strlen(imx35_sdma_pdata.fw_name));
- imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
- }
-
- imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
-
- /* Setup AIPS registers */
- imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS1_BASE_ADDR));
- imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS2_BASE_ADDR));
-
- /* i.mx35 has the i.mx31 type audmux */
- platform_device_register_simple("imx31-audmux", 0, imx35_audmux_res,
- ARRAY_SIZE(imx35_audmux_res));
+ mxc_init_irq(avic_base);
}
#endif /* ifdef CONFIG_SOC_IMX35 */
diff --git a/arch/arm/mach-imx/mx21.h b/arch/arm/mach-imx/mx21.h
deleted file mode 100644
index 38be12a..0000000
--- a/arch/arm/mach-imx/mx21.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2009 Holger Schurig, hs4233@mail.mn-solutions.de
- *
- * This contains i.MX21-specific hardware definitions. For those
- * hardware pieces that are common between i.MX21 and i.MX27, have a
- * look at mx2x.h.
- */
-
-#ifndef __MACH_MX21_H__
-#define __MACH_MX21_H__
-
-#define MX21_AIPI_BASE_ADDR 0x10000000
-#define MX21_AIPI_SIZE SZ_1M
-#define MX21_DMA_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x01000)
-#define MX21_WDOG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x02000)
-#define MX21_GPT1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x03000)
-#define MX21_GPT2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x04000)
-#define MX21_GPT3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x05000)
-#define MX21_PWM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x06000)
-#define MX21_RTC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x07000)
-#define MX21_KPP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x08000)
-#define MX21_OWIRE_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x09000)
-#define MX21_UART1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0a000)
-#define MX21_UART2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0b000)
-#define MX21_UART3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0c000)
-#define MX21_UART4_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0d000)
-#define MX21_CSPI1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0e000)
-#define MX21_CSPI2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0f000)
-#define MX21_SSI1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x10000)
-#define MX21_SSI2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x11000)
-#define MX21_I2C_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x12000)
-#define MX21_SDHC1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x13000)
-#define MX21_SDHC2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x14000)
-#define MX21_GPIO_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x15000)
-#define MX21_GPIO1_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x000)
-#define MX21_GPIO2_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x100)
-#define MX21_GPIO3_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x200)
-#define MX21_GPIO4_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x300)
-#define MX21_GPIO5_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x400)
-#define MX21_GPIO6_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x500)
-#define MX21_AUDMUX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x16000)
-#define MX21_CSPI3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x17000)
-#define MX21_LCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x21000)
-#define MX21_SLCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x22000)
-#define MX21_USBOTG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x24000)
-#define MX21_EMMA_PP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x26000)
-#define MX21_EMMA_PRP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x26400)
-#define MX21_CCM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x27000)
-#define MX21_SYSCTRL_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x27800)
-#define MX21_JAM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x3e000)
-#define MX21_MAX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x3f000)
-
-#define MX21_AVIC_BASE_ADDR 0x10040000
-
-#define MX21_SAHB1_BASE_ADDR 0x80000000
-#define MX21_SAHB1_SIZE SZ_1M
-#define MX21_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000)
-
-/* Memory regions and CS */
-#define MX21_SDRAM_BASE_ADDR 0xc0000000
-#define MX21_CSD1_BASE_ADDR 0xc4000000
-
-#define MX21_CS0_BASE_ADDR 0xc8000000
-#define MX21_CS1_BASE_ADDR 0xcc000000
-#define MX21_CS2_BASE_ADDR 0xd0000000
-#define MX21_CS3_BASE_ADDR 0xd1000000
-#define MX21_CS4_BASE_ADDR 0xd2000000
-#define MX21_PCMCIA_MEM_BASE_ADDR 0xd4000000
-#define MX21_CS5_BASE_ADDR 0xdd000000
-
-/* NAND, SDRAM, WEIM etc controllers */
-#define MX21_X_MEMC_BASE_ADDR 0xdf000000
-#define MX21_X_MEMC_SIZE SZ_256K
-
-#define MX21_SDRAMC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x0000)
-#define MX21_EIM_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x1000)
-#define MX21_PCMCIA_CTL_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x2000)
-#define MX21_NFC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x3000)
-
-#define MX21_IRAM_BASE_ADDR 0xffffe800 /* internal ram */
-
-#define MX21_IO_P2V(x) IMX_IO_P2V(x)
-#define MX21_IO_ADDRESS(x) IOMEM(MX21_IO_P2V(x))
-
-/* fixed interrupt numbers */
-#include <asm/irq.h>
-#define MX21_INT_CSPI3 (NR_IRQS_LEGACY + 6)
-#define MX21_INT_GPIO (NR_IRQS_LEGACY + 8)
-#define MX21_INT_FIRI (NR_IRQS_LEGACY + 9)
-#define MX21_INT_SDHC2 (NR_IRQS_LEGACY + 10)
-#define MX21_INT_SDHC1 (NR_IRQS_LEGACY + 11)
-#define MX21_INT_I2C (NR_IRQS_LEGACY + 12)
-#define MX21_INT_SSI2 (NR_IRQS_LEGACY + 13)
-#define MX21_INT_SSI1 (NR_IRQS_LEGACY + 14)
-#define MX21_INT_CSPI2 (NR_IRQS_LEGACY + 15)
-#define MX21_INT_CSPI1 (NR_IRQS_LEGACY + 16)
-#define MX21_INT_UART4 (NR_IRQS_LEGACY + 17)
-#define MX21_INT_UART3 (NR_IRQS_LEGACY + 18)
-#define MX21_INT_UART2 (NR_IRQS_LEGACY + 19)
-#define MX21_INT_UART1 (NR_IRQS_LEGACY + 20)
-#define MX21_INT_KPP (NR_IRQS_LEGACY + 21)
-#define MX21_INT_RTC (NR_IRQS_LEGACY + 22)
-#define MX21_INT_PWM (NR_IRQS_LEGACY + 23)
-#define MX21_INT_GPT3 (NR_IRQS_LEGACY + 24)
-#define MX21_INT_GPT2 (NR_IRQS_LEGACY + 25)
-#define MX21_INT_GPT1 (NR_IRQS_LEGACY + 26)
-#define MX21_INT_WDOG (NR_IRQS_LEGACY + 27)
-#define MX21_INT_PCMCIA (NR_IRQS_LEGACY + 28)
-#define MX21_INT_NFC (NR_IRQS_LEGACY + 29)
-#define MX21_INT_BMI (NR_IRQS_LEGACY + 30)
-#define MX21_INT_CSI (NR_IRQS_LEGACY + 31)
-#define MX21_INT_DMACH0 (NR_IRQS_LEGACY + 32)
-#define MX21_INT_DMACH1 (NR_IRQS_LEGACY + 33)
-#define MX21_INT_DMACH2 (NR_IRQS_LEGACY + 34)
-#define MX21_INT_DMACH3 (NR_IRQS_LEGACY + 35)
-#define MX21_INT_DMACH4 (NR_IRQS_LEGACY + 36)
-#define MX21_INT_DMACH5 (NR_IRQS_LEGACY + 37)
-#define MX21_INT_DMACH6 (NR_IRQS_LEGACY + 38)
-#define MX21_INT_DMACH7 (NR_IRQS_LEGACY + 39)
-#define MX21_INT_DMACH8 (NR_IRQS_LEGACY + 40)
-#define MX21_INT_DMACH9 (NR_IRQS_LEGACY + 41)
-#define MX21_INT_DMACH10 (NR_IRQS_LEGACY + 42)
-#define MX21_INT_DMACH11 (NR_IRQS_LEGACY + 43)
-#define MX21_INT_DMACH12 (NR_IRQS_LEGACY + 44)
-#define MX21_INT_DMACH13 (NR_IRQS_LEGACY + 45)
-#define MX21_INT_DMACH14 (NR_IRQS_LEGACY + 46)
-#define MX21_INT_DMACH15 (NR_IRQS_LEGACY + 47)
-#define MX21_INT_EMMAENC (NR_IRQS_LEGACY + 49)
-#define MX21_INT_EMMADEC (NR_IRQS_LEGACY + 50)
-#define MX21_INT_EMMAPRP (NR_IRQS_LEGACY + 51)
-#define MX21_INT_EMMAPP (NR_IRQS_LEGACY + 52)
-#define MX21_INT_USBWKUP (NR_IRQS_LEGACY + 53)
-#define MX21_INT_USBDMA (NR_IRQS_LEGACY + 54)
-#define MX21_INT_USBHOST (NR_IRQS_LEGACY + 55)
-#define MX21_INT_USBFUNC (NR_IRQS_LEGACY + 56)
-#define MX21_INT_USBMNP (NR_IRQS_LEGACY + 57)
-#define MX21_INT_USBCTRL (NR_IRQS_LEGACY + 58)
-#define MX21_INT_SLCDC (NR_IRQS_LEGACY + 60)
-#define MX21_INT_LCDC (NR_IRQS_LEGACY + 61)
-
-/* fixed DMA request numbers */
-#define MX21_DMA_REQ_CSPI3_RX 1
-#define MX21_DMA_REQ_CSPI3_TX 2
-#define MX21_DMA_REQ_EXT 3
-#define MX21_DMA_REQ_FIRI_RX 4
-#define MX21_DMA_REQ_SDHC2 6
-#define MX21_DMA_REQ_SDHC1 7
-#define MX21_DMA_REQ_SSI2_RX0 8
-#define MX21_DMA_REQ_SSI2_TX0 9
-#define MX21_DMA_REQ_SSI2_RX1 10
-#define MX21_DMA_REQ_SSI2_TX1 11
-#define MX21_DMA_REQ_SSI1_RX0 12
-#define MX21_DMA_REQ_SSI1_TX0 13
-#define MX21_DMA_REQ_SSI1_RX1 14
-#define MX21_DMA_REQ_SSI1_TX1 15
-#define MX21_DMA_REQ_CSPI2_RX 16
-#define MX21_DMA_REQ_CSPI2_TX 17
-#define MX21_DMA_REQ_CSPI1_RX 18
-#define MX21_DMA_REQ_CSPI1_TX 19
-#define MX21_DMA_REQ_UART4_RX 20
-#define MX21_DMA_REQ_UART4_TX 21
-#define MX21_DMA_REQ_UART3_RX 22
-#define MX21_DMA_REQ_UART3_TX 23
-#define MX21_DMA_REQ_UART2_RX 24
-#define MX21_DMA_REQ_UART2_TX 25
-#define MX21_DMA_REQ_UART1_RX 26
-#define MX21_DMA_REQ_UART1_TX 27
-#define MX21_DMA_REQ_BMI_TX 28
-#define MX21_DMA_REQ_BMI_RX 29
-#define MX21_DMA_REQ_CSI_STAT 30
-#define MX21_DMA_REQ_CSI_RX 31
-
-#endif /* ifndef __MACH_MX21_H__ */
diff --git a/arch/arm/mach-imx/mx27.h b/arch/arm/mach-imx/mx27.h
index c6f7aae..241c04d 100644
--- a/arch/arm/mach-imx/mx27.h
+++ b/arch/arm/mach-imx/mx27.h
@@ -13,209 +13,13 @@
#define MX27_AIPI_BASE_ADDR 0x10000000
#define MX27_AIPI_SIZE SZ_1M
-#define MX27_DMA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x01000)
-#define MX27_WDOG_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x02000)
-#define MX27_GPT1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x03000)
-#define MX27_GPT2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x04000)
-#define MX27_GPT3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x05000)
-#define MX27_PWM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x06000)
-#define MX27_RTC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x07000)
-#define MX27_KPP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x08000)
-#define MX27_OWIRE_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x09000)
-#define MX27_UART1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0a000)
-#define MX27_UART2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0b000)
-#define MX27_UART3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0c000)
-#define MX27_UART4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0d000)
-#define MX27_CSPI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0e000)
-#define MX27_CSPI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0f000)
-#define MX27_SSI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x10000)
-#define MX27_SSI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x11000)
-#define MX27_I2C1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x12000)
-#define MX27_SDHC1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x13000)
-#define MX27_SDHC2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x14000)
-#define MX27_GPIO_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x15000)
-#define MX27_GPIO1_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x000)
-#define MX27_GPIO2_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x100)
-#define MX27_GPIO3_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x200)
-#define MX27_GPIO4_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x300)
-#define MX27_GPIO5_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x400)
-#define MX27_GPIO6_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x500)
-#define MX27_AUDMUX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x16000)
-#define MX27_CSPI3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x17000)
-#define MX27_MSHC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x18000)
-#define MX27_GPT4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x19000)
-#define MX27_GPT5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1a000)
-#define MX27_UART5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1b000)
-#define MX27_UART6_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1c000)
-#define MX27_I2C2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1d000)
-#define MX27_SDHC3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1e000)
-#define MX27_GPT6_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1f000)
-#define MX27_LCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x21000)
-#define MX27_SLCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x22000)
-#define MX27_VPU_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x23000)
-#define MX27_USB_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x24000)
-#define MX27_USB_OTG_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0000)
-#define MX27_USB_HS1_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0200)
-#define MX27_USB_HS2_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0400)
-#define MX27_SAHARA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x25000)
-#define MX27_EMMAPP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26000)
-#define MX27_EMMAPRP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26400)
-#define MX27_CCM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27000)
-#define MX27_SYSCTRL_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27800)
-#define MX27_IIM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x28000)
-#define MX27_RTIC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2a000)
-#define MX27_FEC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2b000)
-#define MX27_SCC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2c000)
-#define MX27_ETB_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3b000)
-#define MX27_ETB_RAM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3c000)
-#define MX27_JAM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3e000)
-#define MX27_MAX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3f000)
-
-#define MX27_AVIC_BASE_ADDR 0x10040000
-
-/* ROM patch */
-#define MX27_ROMP_BASE_ADDR 0x10041000
#define MX27_SAHB1_BASE_ADDR 0x80000000
#define MX27_SAHB1_SIZE SZ_1M
-#define MX27_CSI_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x0000)
-#define MX27_ATA_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x1000)
-/* Memory regions and CS */
-#define MX27_SDRAM_BASE_ADDR 0xa0000000
-#define MX27_CSD1_BASE_ADDR 0xb0000000
-
-#define MX27_CS0_BASE_ADDR 0xc0000000
-#define MX27_CS1_BASE_ADDR 0xc8000000
-#define MX27_CS2_BASE_ADDR 0xd0000000
-#define MX27_CS3_BASE_ADDR 0xd2000000
-#define MX27_CS4_BASE_ADDR 0xd4000000
-#define MX27_CS5_BASE_ADDR 0xd6000000
-
-/* NAND, SDRAM, WEIM, M3IF, EMI controllers */
#define MX27_X_MEMC_BASE_ADDR 0xd8000000
#define MX27_X_MEMC_SIZE SZ_1M
-#define MX27_NFC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR)
-#define MX27_SDRAMC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x1000)
-#define MX27_WEIM_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x2000)
-#define MX27_M3IF_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x3000)
-#define MX27_PCMCIA_CTL_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x4000)
-
-#define MX27_WEIM_CSCRx_BASE_ADDR(cs) (MX27_WEIM_BASE_ADDR + (cs) * 0x10)
-#define MX27_WEIM_CSCRxU(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs))
-#define MX27_WEIM_CSCRxL(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
-#define MX27_WEIM_CSCRxA(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
-
-#define MX27_PCMCIA_MEM_BASE_ADDR 0xdc000000
-
-/* IRAM */
-#define MX27_IRAM_BASE_ADDR 0xffff4c00 /* internal ram */
#define MX27_IO_P2V(x) IMX_IO_P2V(x)
-#define MX27_IO_ADDRESS(x) IOMEM(MX27_IO_P2V(x))
-
-/* fixed interrupt numbers */
-#include <asm/irq.h>
-#define MX27_INT_I2C2 (NR_IRQS_LEGACY + 1)
-#define MX27_INT_GPT6 (NR_IRQS_LEGACY + 2)
-#define MX27_INT_GPT5 (NR_IRQS_LEGACY + 3)
-#define MX27_INT_GPT4 (NR_IRQS_LEGACY + 4)
-#define MX27_INT_RTIC (NR_IRQS_LEGACY + 5)
-#define MX27_INT_CSPI3 (NR_IRQS_LEGACY + 6)
-#define MX27_INT_MSHC (NR_IRQS_LEGACY + 7)
-#define MX27_INT_GPIO (NR_IRQS_LEGACY + 8)
-#define MX27_INT_SDHC3 (NR_IRQS_LEGACY + 9)
-#define MX27_INT_SDHC2 (NR_IRQS_LEGACY + 10)
-#define MX27_INT_SDHC1 (NR_IRQS_LEGACY + 11)
-#define MX27_INT_I2C1 (NR_IRQS_LEGACY + 12)
-#define MX27_INT_SSI2 (NR_IRQS_LEGACY + 13)
-#define MX27_INT_SSI1 (NR_IRQS_LEGACY + 14)
-#define MX27_INT_CSPI2 (NR_IRQS_LEGACY + 15)
-#define MX27_INT_CSPI1 (NR_IRQS_LEGACY + 16)
-#define MX27_INT_UART4 (NR_IRQS_LEGACY + 17)
-#define MX27_INT_UART3 (NR_IRQS_LEGACY + 18)
-#define MX27_INT_UART2 (NR_IRQS_LEGACY + 19)
-#define MX27_INT_UART1 (NR_IRQS_LEGACY + 20)
-#define MX27_INT_KPP (NR_IRQS_LEGACY + 21)
-#define MX27_INT_RTC (NR_IRQS_LEGACY + 22)
-#define MX27_INT_PWM (NR_IRQS_LEGACY + 23)
-#define MX27_INT_GPT3 (NR_IRQS_LEGACY + 24)
-#define MX27_INT_GPT2 (NR_IRQS_LEGACY + 25)
-#define MX27_INT_GPT1 (NR_IRQS_LEGACY + 26)
-#define MX27_INT_WDOG (NR_IRQS_LEGACY + 27)
-#define MX27_INT_PCMCIA (NR_IRQS_LEGACY + 28)
-#define MX27_INT_NFC (NR_IRQS_LEGACY + 29)
-#define MX27_INT_ATA (NR_IRQS_LEGACY + 30)
-#define MX27_INT_CSI (NR_IRQS_LEGACY + 31)
-#define MX27_INT_DMACH0 (NR_IRQS_LEGACY + 32)
-#define MX27_INT_DMACH1 (NR_IRQS_LEGACY + 33)
-#define MX27_INT_DMACH2 (NR_IRQS_LEGACY + 34)
-#define MX27_INT_DMACH3 (NR_IRQS_LEGACY + 35)
-#define MX27_INT_DMACH4 (NR_IRQS_LEGACY + 36)
-#define MX27_INT_DMACH5 (NR_IRQS_LEGACY + 37)
-#define MX27_INT_DMACH6 (NR_IRQS_LEGACY + 38)
-#define MX27_INT_DMACH7 (NR_IRQS_LEGACY + 39)
-#define MX27_INT_DMACH8 (NR_IRQS_LEGACY + 40)
-#define MX27_INT_DMACH9 (NR_IRQS_LEGACY + 41)
-#define MX27_INT_DMACH10 (NR_IRQS_LEGACY + 42)
-#define MX27_INT_DMACH11 (NR_IRQS_LEGACY + 43)
-#define MX27_INT_DMACH12 (NR_IRQS_LEGACY + 44)
-#define MX27_INT_DMACH13 (NR_IRQS_LEGACY + 45)
-#define MX27_INT_DMACH14 (NR_IRQS_LEGACY + 46)
-#define MX27_INT_DMACH15 (NR_IRQS_LEGACY + 47)
-#define MX27_INT_UART6 (NR_IRQS_LEGACY + 48)
-#define MX27_INT_UART5 (NR_IRQS_LEGACY + 49)
-#define MX27_INT_FEC (NR_IRQS_LEGACY + 50)
-#define MX27_INT_EMMAPRP (NR_IRQS_LEGACY + 51)
-#define MX27_INT_EMMAPP (NR_IRQS_LEGACY + 52)
-#define MX27_INT_VPU (NR_IRQS_LEGACY + 53)
-#define MX27_INT_USB_HS1 (NR_IRQS_LEGACY + 54)
-#define MX27_INT_USB_HS2 (NR_IRQS_LEGACY + 55)
-#define MX27_INT_USB_OTG (NR_IRQS_LEGACY + 56)
-#define MX27_INT_SCC_SMN (NR_IRQS_LEGACY + 57)
-#define MX27_INT_SCC_SCM (NR_IRQS_LEGACY + 58)
-#define MX27_INT_SAHARA (NR_IRQS_LEGACY + 59)
-#define MX27_INT_SLCDC (NR_IRQS_LEGACY + 60)
-#define MX27_INT_LCDC (NR_IRQS_LEGACY + 61)
-#define MX27_INT_IIM (NR_IRQS_LEGACY + 62)
-#define MX27_INT_CCM (NR_IRQS_LEGACY + 63)
-
-/* fixed DMA request numbers */
-#define MX27_DMA_REQ_CSPI3_RX 1
-#define MX27_DMA_REQ_CSPI3_TX 2
-#define MX27_DMA_REQ_EXT 3
-#define MX27_DMA_REQ_MSHC 4
-#define MX27_DMA_REQ_SDHC2 6
-#define MX27_DMA_REQ_SDHC1 7
-#define MX27_DMA_REQ_SSI2_RX0 8
-#define MX27_DMA_REQ_SSI2_TX0 9
-#define MX27_DMA_REQ_SSI2_RX1 10
-#define MX27_DMA_REQ_SSI2_TX1 11
-#define MX27_DMA_REQ_SSI1_RX0 12
-#define MX27_DMA_REQ_SSI1_TX0 13
-#define MX27_DMA_REQ_SSI1_RX1 14
-#define MX27_DMA_REQ_SSI1_TX1 15
-#define MX27_DMA_REQ_CSPI2_RX 16
-#define MX27_DMA_REQ_CSPI2_TX 17
-#define MX27_DMA_REQ_CSPI1_RX 18
-#define MX27_DMA_REQ_CSPI1_TX 19
-#define MX27_DMA_REQ_UART4_RX 20
-#define MX27_DMA_REQ_UART4_TX 21
-#define MX27_DMA_REQ_UART3_RX 22
-#define MX27_DMA_REQ_UART3_TX 23
-#define MX27_DMA_REQ_UART2_RX 24
-#define MX27_DMA_REQ_UART2_TX 25
-#define MX27_DMA_REQ_UART1_RX 26
-#define MX27_DMA_REQ_UART1_TX 27
-#define MX27_DMA_REQ_ATA_TX 28
-#define MX27_DMA_REQ_ATA_RCV 29
-#define MX27_DMA_REQ_CSI_STAT 30
-#define MX27_DMA_REQ_CSI_RX 31
-#define MX27_DMA_REQ_UART5_TX 32
-#define MX27_DMA_REQ_UART5_RX 33
-#define MX27_DMA_REQ_UART6_TX 34
-#define MX27_DMA_REQ_UART6_RX 35
-#define MX27_DMA_REQ_SDHC3 36
-#define MX27_DMA_REQ_NFC 37
#endif /* ifndef __MACH_MX27_H__ */
diff --git a/arch/arm/mach-imx/mx31.h b/arch/arm/mach-imx/mx31.h
index d957467..08a72e2 100644
--- a/arch/arm/mach-imx/mx31.h
+++ b/arch/arm/mach-imx/mx31.h
@@ -2,196 +2,17 @@
#ifndef __MACH_MX31_H__
#define __MACH_MX31_H__
-/*
- * IRAM
- */
-#define MX31_IRAM_BASE_ADDR 0x1ffc0000 /* internal ram */
-#define MX31_IRAM_SIZE SZ_16K
-
-#define MX31_L2CC_BASE_ADDR 0x30000000
-#define MX31_L2CC_SIZE SZ_1M
-
#define MX31_AIPS1_BASE_ADDR 0x43f00000
#define MX31_AIPS1_SIZE SZ_1M
-#define MX31_MAX_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x04000)
-#define MX31_EVTMON_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x08000)
-#define MX31_CLKCTL_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x0c000)
-#define MX31_ETB_SLOT4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x10000)
-#define MX31_ETB_SLOT5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x14000)
-#define MX31_ECT_CTIO_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x18000)
-#define MX31_I2C1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000)
-#define MX31_I2C3_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x84000)
-#define MX31_USB_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000)
-#define MX31_USB_OTG_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0000)
-#define MX31_USB_HS1_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0200)
-#define MX31_USB_HS2_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0400)
-#define MX31_ATA_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x8c000)
-#define MX31_UART1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x90000)
-#define MX31_UART2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x94000)
-#define MX31_I2C2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x98000)
-#define MX31_OWIRE_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x9c000)
-#define MX31_SSI1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa0000)
-#define MX31_CSPI1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa4000)
-#define MX31_KPP_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa8000)
-#define MX31_IOMUXC_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xac000)
-#define MX31_UART4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb0000)
-#define MX31_UART5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb4000)
-#define MX31_ECT_IP1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb8000)
-#define MX31_ECT_IP2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xbc000)
-
#define MX31_SPBA0_BASE_ADDR 0x50000000
#define MX31_SPBA0_SIZE SZ_1M
-#define MX31_SDHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x04000)
-#define MX31_SDHC2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x08000)
-#define MX31_UART3_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x0c000)
-#define MX31_CSPI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x10000)
-#define MX31_SSI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x14000)
-#define MX31_SIM1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x18000)
-#define MX31_IIM_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x1c000)
-#define MX31_ATA_DMA_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x20000)
-#define MX31_MSHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x24000)
-#define MX31_SPBA_CTRL_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x3c000)
-
#define MX31_AIPS2_BASE_ADDR 0x53f00000
#define MX31_AIPS2_SIZE SZ_1M
-#define MX31_CCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x80000)
-#define MX31_CSPI3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x84000)
-#define MX31_FIRI_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x8c000)
-#define MX31_GPT1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x90000)
-#define MX31_EPIT1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x94000)
-#define MX31_EPIT2_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x98000)
-#define MX31_GPIO3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xa4000)
-#define MX31_SCC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xac000)
-#define MX31_SCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xae000)
-#define MX31_SMN_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xaf000)
-#define MX31_RNGA_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xb0000)
-#define MX31_IPU_CTRL_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc0000)
-#define MX31_AUDMUX_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc4000)
-#define MX31_MPEG4_ENC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc8000)
-#define MX31_GPIO1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xcc000)
-#define MX31_GPIO2_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd0000)
-#define MX31_SDMA_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd4000)
-#define MX31_RTC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd8000)
-#define MX31_WDOG_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xdc000)
-#define MX31_PWM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xe0000)
-#define MX31_RTIC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xec000)
-
-#define MX31_ROMP_BASE_ADDR 0x60000000
-#define MX31_ROMP_BASE_ADDR_VIRT IOMEM(0xfc500000)
-#define MX31_ROMP_SIZE SZ_1M
-
#define MX31_AVIC_BASE_ADDR 0x68000000
#define MX31_AVIC_SIZE SZ_1M
-
-#define MX31_IPU_MEM_BASE_ADDR 0x70000000
-#define MX31_CSD0_BASE_ADDR 0x80000000
-#define MX31_CSD1_BASE_ADDR 0x90000000
-
-#define MX31_CS0_BASE_ADDR 0xa0000000
-#define MX31_CS1_BASE_ADDR 0xa8000000
-#define MX31_CS2_BASE_ADDR 0xb0000000
-#define MX31_CS3_BASE_ADDR 0xb2000000
-
-#define MX31_CS4_BASE_ADDR 0xb4000000
-#define MX31_CS4_BASE_ADDR_VIRT IOMEM(0xf6000000)
-#define MX31_CS4_SIZE SZ_32M
-
-#define MX31_CS5_BASE_ADDR 0xb6000000
-#define MX31_CS5_BASE_ADDR_VIRT IOMEM(0xf8000000)
-#define MX31_CS5_SIZE SZ_32M
-
#define MX31_X_MEMC_BASE_ADDR 0xb8000000
#define MX31_X_MEMC_SIZE SZ_64K
-#define MX31_NFC_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x0000)
-#define MX31_ESDCTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x1000)
-#define MX31_WEIM_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x2000)
-#define MX31_M3IF_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x3000)
-#define MX31_EMI_CTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x4000)
-#define MX31_PCMCIA_CTL_BASE_ADDR MX31_EMI_CTL_BASE_ADDR
-
-#define MX31_WEIM_CSCRx_BASE_ADDR(cs) (MX31_WEIM_BASE_ADDR + (cs) * 0x10)
-#define MX31_WEIM_CSCRxU(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs))
-#define MX31_WEIM_CSCRxL(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
-#define MX31_WEIM_CSCRxA(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
-
-#define MX31_PCMCIA_MEM_BASE_ADDR 0xbc000000
#define MX31_IO_P2V(x) IMX_IO_P2V(x)
-#define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x))
-
-/*
- * Interrupt numbers
- */
-#include <asm/irq.h>
-#define MX31_INT_I2C3 (NR_IRQS_LEGACY + 3)
-#define MX31_INT_I2C2 (NR_IRQS_LEGACY + 4)
-#define MX31_INT_MPEG4_ENCODER (NR_IRQS_LEGACY + 5)
-#define MX31_INT_RTIC (NR_IRQS_LEGACY + 6)
-#define MX31_INT_FIRI (NR_IRQS_LEGACY + 7)
-#define MX31_INT_SDHC2 (NR_IRQS_LEGACY + 8)
-#define MX31_INT_SDHC1 (NR_IRQS_LEGACY + 9)
-#define MX31_INT_I2C1 (NR_IRQS_LEGACY + 10)
-#define MX31_INT_SSI2 (NR_IRQS_LEGACY + 11)
-#define MX31_INT_SSI1 (NR_IRQS_LEGACY + 12)
-#define MX31_INT_CSPI2 (NR_IRQS_LEGACY + 13)
-#define MX31_INT_CSPI1 (NR_IRQS_LEGACY + 14)
-#define MX31_INT_ATA (NR_IRQS_LEGACY + 15)
-#define MX31_INT_MBX (NR_IRQS_LEGACY + 16)
-#define MX31_INT_CSPI3 (NR_IRQS_LEGACY + 17)
-#define MX31_INT_UART3 (NR_IRQS_LEGACY + 18)
-#define MX31_INT_IIM (NR_IRQS_LEGACY + 19)
-#define MX31_INT_SIM2 (NR_IRQS_LEGACY + 20)
-#define MX31_INT_SIM1 (NR_IRQS_LEGACY + 21)
-#define MX31_INT_RNGA (NR_IRQS_LEGACY + 22)
-#define MX31_INT_EVTMON (NR_IRQS_LEGACY + 23)
-#define MX31_INT_KPP (NR_IRQS_LEGACY + 24)
-#define MX31_INT_RTC (NR_IRQS_LEGACY + 25)
-#define MX31_INT_PWM (NR_IRQS_LEGACY + 26)
-#define MX31_INT_EPIT2 (NR_IRQS_LEGACY + 27)
-#define MX31_INT_EPIT1 (NR_IRQS_LEGACY + 28)
-#define MX31_INT_GPT (NR_IRQS_LEGACY + 29)
-#define MX31_INT_POWER_FAIL (NR_IRQS_LEGACY + 30)
-#define MX31_INT_CCM_DVFS (NR_IRQS_LEGACY + 31)
-#define MX31_INT_UART2 (NR_IRQS_LEGACY + 32)
-#define MX31_INT_NFC (NR_IRQS_LEGACY + 33)
-#define MX31_INT_SDMA (NR_IRQS_LEGACY + 34)
-#define MX31_INT_USB_HS1 (NR_IRQS_LEGACY + 35)
-#define MX31_INT_USB_HS2 (NR_IRQS_LEGACY + 36)
-#define MX31_INT_USB_OTG (NR_IRQS_LEGACY + 37)
-#define MX31_INT_MSHC1 (NR_IRQS_LEGACY + 39)
-#define MX31_INT_MSHC2 (NR_IRQS_LEGACY + 40)
-#define MX31_INT_IPU_ERR (NR_IRQS_LEGACY + 41)
-#define MX31_INT_IPU_SYN (NR_IRQS_LEGACY + 42)
-#define MX31_INT_UART1 (NR_IRQS_LEGACY + 45)
-#define MX31_INT_UART4 (NR_IRQS_LEGACY + 46)
-#define MX31_INT_UART5 (NR_IRQS_LEGACY + 47)
-#define MX31_INT_ECT (NR_IRQS_LEGACY + 48)
-#define MX31_INT_SCC_SCM (NR_IRQS_LEGACY + 49)
-#define MX31_INT_SCC_SMN (NR_IRQS_LEGACY + 50)
-#define MX31_INT_GPIO2 (NR_IRQS_LEGACY + 51)
-#define MX31_INT_GPIO1 (NR_IRQS_LEGACY + 52)
-#define MX31_INT_CCM (NR_IRQS_LEGACY + 53)
-#define MX31_INT_PCMCIA (NR_IRQS_LEGACY + 54)
-#define MX31_INT_WDOG (NR_IRQS_LEGACY + 55)
-#define MX31_INT_GPIO3 (NR_IRQS_LEGACY + 56)
-#define MX31_INT_EXT_POWER (NR_IRQS_LEGACY + 58)
-#define MX31_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59)
-#define MX31_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60)
-#define MX31_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61)
-#define MX31_INT_EXT_WDOG (NR_IRQS_LEGACY + 62)
-#define MX31_INT_EXT_TV (NR_IRQS_LEGACY + 63)
-
-#define MX31_DMA_REQ_SDHC1 20
-#define MX31_DMA_REQ_SDHC2 21
-#define MX31_DMA_REQ_SSI2_RX1 22
-#define MX31_DMA_REQ_SSI2_TX1 23
-#define MX31_DMA_REQ_SSI2_RX0 24
-#define MX31_DMA_REQ_SSI2_TX0 25
-#define MX31_DMA_REQ_SSI1_RX1 26
-#define MX31_DMA_REQ_SSI1_TX1 27
-#define MX31_DMA_REQ_SSI1_RX0 28
-#define MX31_DMA_REQ_SSI1_TX0 29
-
-#define MX31_PROD_SIGNATURE 0x1 /* For MX31 */
#endif /* ifndef __MACH_MX31_H__ */
diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c
deleted file mode 100644
index 00a5ee3..0000000
--- a/arch/arm/mach-imx/mx31lilly-db.c
+++ /dev/null
@@ -1,182 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * LILLY-1131 development board support
- *
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * based on code for other MX31 boards,
- *
- * Copyright 2005-2007 Freescale Semiconductor
- * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "board-mx31lilly.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-
-/*
- * This file contains board-specific initialization routines for the
- * LILLY-1131 development board. If you design an own baseboard for the
- * module, use this file as base for support code.
- */
-
-static unsigned int lilly_db_board_pins[] __initdata = {
- MX31_PIN_SD1_DATA3__SD1_DATA3,
- MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA1__SD1_DATA1,
- MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_CLK__SD1_CLK,
- MX31_PIN_SD1_CMD__SD1_CMD,
- MX31_PIN_LD0__LD0,
- MX31_PIN_LD1__LD1,
- MX31_PIN_LD2__LD2,
- MX31_PIN_LD3__LD3,
- MX31_PIN_LD4__LD4,
- MX31_PIN_LD5__LD5,
- MX31_PIN_LD6__LD6,
- MX31_PIN_LD7__LD7,
- MX31_PIN_LD8__LD8,
- MX31_PIN_LD9__LD9,
- MX31_PIN_LD10__LD10,
- MX31_PIN_LD11__LD11,
- MX31_PIN_LD12__LD12,
- MX31_PIN_LD13__LD13,
- MX31_PIN_LD14__LD14,
- MX31_PIN_LD15__LD15,
- MX31_PIN_LD16__LD16,
- MX31_PIN_LD17__LD17,
- MX31_PIN_VSYNC3__VSYNC3,
- MX31_PIN_HSYNC__HSYNC,
- MX31_PIN_FPSHIFT__FPSHIFT,
- MX31_PIN_DRDY0__DRDY0,
- MX31_PIN_CONTRAST__CONTRAST,
-};
-
-/* MMC support */
-
-static int mxc_mmc1_get_ro(struct device *dev)
-{
- return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
-}
-
-static int gpio_det, gpio_wp;
-
-#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int mxc_mmc1_init(struct device *dev,
- irq_handler_t detect_irq, void *data)
-{
- int ret;
-
- gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1);
- gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0);
-
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
-
- ret = gpio_request(gpio_det, "MMC detect");
- if (ret)
- return ret;
-
- ret = gpio_request(gpio_wp, "MMC w/p");
- if (ret)
- goto exit_free_det;
-
- gpio_direction_input(gpio_det);
- gpio_direction_input(gpio_wp);
-
- ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)),
- detect_irq, IRQF_TRIGGER_FALLING,
- "MMC detect", data);
- if (ret)
- goto exit_free_wp;
-
- return 0;
-
-exit_free_wp:
- gpio_free(gpio_wp);
-
-exit_free_det:
- gpio_free(gpio_det);
-
- return ret;
-}
-
-static void mxc_mmc1_exit(struct device *dev, void *data)
-{
- gpio_free(gpio_det);
- gpio_free(gpio_wp);
- free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)), data);
-}
-
-static const struct imxmmc_platform_data mmc_pdata __initconst = {
- .get_ro = mxc_mmc1_get_ro,
- .init = mxc_mmc1_init,
- .exit = mxc_mmc1_exit,
-};
-
-/* Framebuffer support */
-static const struct fb_videomode fb_modedb = {
- /* 640x480 TFT panel (IPS-056T) */
- .name = "CRT-VGA",
- .refresh = 64,
- .xres = 640,
- .yres = 480,
- .pixclock = 30000,
- .left_margin = 200,
- .right_margin = 2,
- .upper_margin = 2,
- .lower_margin = 2,
- .hsync_len = 3,
- .vsync_len = 1,
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
-};
-
-static struct mx3fb_platform_data fb_pdata __initdata = {
- .name = "CRT-VGA",
- .mode = &fb_modedb,
- .num_modes = 1,
-};
-
-#define LCD_VCC_EN_GPIO (7)
-
-static void __init mx31lilly_init_fb(void)
-{
- if (gpio_request(LCD_VCC_EN_GPIO, "LCD enable") != 0) {
- printk(KERN_WARNING "unable to request LCD_VCC_EN pin.\n");
- return;
- }
-
- imx31_add_ipu_core();
- imx31_add_mx3_sdc_fb(&fb_pdata);
- gpio_direction_output(LCD_VCC_EN_GPIO, 1);
-}
-
-void __init mx31lilly_db_init(void)
-{
- mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
- ARRAY_SIZE(lilly_db_board_pins),
- "development board pins");
- imx31_add_mxc_mmc(0, &mmc_pdata);
- mx31lilly_init_fb();
-}
diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c
deleted file mode 100644
index 13da732..0000000
--- a/arch/arm/mach-imx/mx31lite-db.c
+++ /dev/null
@@ -1,154 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * LogicPD i.MX31 SOM-LV development board support
- *
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * based on code for other MX31 boards,
- *
- * Copyright 2005-2007 Freescale Semiconductor
- * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "board-mx31lite.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-
-/*
- * This file contains board-specific initialization routines for the
- * LogicPD i.MX31 SOM-LV development board, aka 'LiteKit'.
- * If you design an own baseboard for the module, use this file as base
- * for support code.
- */
-
-static unsigned int litekit_db_board_pins[] __initdata = {
- /* SDHC1 */
- MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_DATA1__SD1_DATA1,
- MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA3__SD1_DATA3,
- MX31_PIN_SD1_CLK__SD1_CLK,
- MX31_PIN_SD1_CMD__SD1_CMD,
-};
-
-/* MMC */
-
-static int gpio_det, gpio_wp;
-
-#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS)
-
-static int mxc_mmc1_get_ro(struct device *dev)
-{
- return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_GPIO1_6));
-}
-
-static int mxc_mmc1_init(struct device *dev,
- irq_handler_t detect_irq, void *data)
-{
- int ret;
-
- gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
- gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
-
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA0,
- MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA1,
- MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA2,
- MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA3,
- MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_SD1_CMD,
- MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
-
- ret = gpio_request(gpio_det, "MMC detect");
- if (ret)
- return ret;
-
- ret = gpio_request(gpio_wp, "MMC w/p");
- if (ret)
- goto exit_free_det;
-
- gpio_direction_input(gpio_det);
- gpio_direction_input(gpio_wp);
-
- ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)),
- detect_irq,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "MMC detect", data);
- if (ret)
- goto exit_free_wp;
-
- return 0;
-
-exit_free_wp:
- gpio_free(gpio_wp);
-
-exit_free_det:
- gpio_free(gpio_det);
-
- return ret;
-}
-
-static void mxc_mmc1_exit(struct device *dev, void *data)
-{
- gpio_free(gpio_det);
- gpio_free(gpio_wp);
- free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)), data);
-}
-
-static const struct imxmmc_platform_data mmc_pdata __initconst = {
- .get_ro = mxc_mmc1_get_ro,
- .init = mxc_mmc1_init,
- .exit = mxc_mmc1_exit,
-};
-
-/* GPIO LEDs */
-
-static const struct gpio_led litekit_leds[] __initconst = {
- {
- .name = "GPIO0",
- .gpio = IOMUX_TO_GPIO(MX31_PIN_COMPARE),
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- {
- .name = "GPIO1",
- .gpio = IOMUX_TO_GPIO(MX31_PIN_CAPTURE),
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- }
-};
-
-static const struct gpio_led_platform_data
- litekit_led_platform_data __initconst = {
- .leds = litekit_leds,
- .num_leds = ARRAY_SIZE(litekit_leds),
-};
-
-void __init mx31lite_db_init(void)
-{
- mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
- ARRAY_SIZE(litekit_db_board_pins),
- "development board pins");
- imx31_add_mxc_mmc(0, &mmc_pdata);
- gpio_led_register_device(-1, &litekit_led_platform_data);
- imx31_add_imx2_wdt();
- imx31_add_mxc_rtc();
-}
diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c
deleted file mode 100644
index 6a9db06..0000000
--- a/arch/arm/mach-imx/mx31moboard-devboard.c
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-
-#include <linux/usb/otg.h>
-
-#include "board-mx31moboard.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-#include "ulpi.h"
-
-static unsigned int devboard_pins[] = {
- /* UART1 */
- MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
- MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
- /* SDHC2 */
- MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
- MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
- MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
- MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
- /* USB H1 */
- MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
- MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
- MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
- MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
- MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
- /* SEL */
- MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
- MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
-#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
-
-static int devboard_sdhc2_get_ro(struct device *dev)
-{
- return !gpio_get_value(SDHC2_WP);
-}
-
-static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- int ret;
-
- ret = gpio_request(SDHC2_CD, "sdhc-detect");
- if (ret)
- return ret;
-
- gpio_direction_input(SDHC2_CD);
-
- ret = gpio_request(SDHC2_WP, "sdhc-wp");
- if (ret)
- goto err_gpio_free;
- gpio_direction_input(SDHC2_WP);
-
- ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "sdhc2-card-detect", data);
- if (ret)
- goto err_gpio_free_2;
-
- return 0;
-
-err_gpio_free_2:
- gpio_free(SDHC2_WP);
-err_gpio_free:
- gpio_free(SDHC2_CD);
-
- return ret;
-}
-
-static void devboard_sdhc2_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(SDHC2_CD), data);
- gpio_free(SDHC2_WP);
- gpio_free(SDHC2_CD);
-}
-
-static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
- .get_ro = devboard_sdhc2_get_ro,
- .init = devboard_sdhc2_init,
- .exit = devboard_sdhc2_exit,
-};
-
-#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
-#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
-#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
-
-static void devboard_init_sel_gpios(void)
-{
- if (!gpio_request(SEL0, "sel0")) {
- gpio_direction_input(SEL0);
- gpio_export(SEL0, true);
- }
-
- if (!gpio_request(SEL1, "sel1")) {
- gpio_direction_input(SEL1);
- gpio_export(SEL1, true);
- }
-
- if (!gpio_request(SEL2, "sel2")) {
- gpio_direction_input(SEL2);
- gpio_export(SEL2, true);
- }
-
- if (!gpio_request(SEL3, "sel3")) {
- gpio_direction_input(SEL3);
- gpio_export(SEL3, true);
- }
-}
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int devboard_usbh1_hw_init(struct platform_device *pdev)
-{
- mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
-
- mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
-
- mdelay(10);
-
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
- MXC_EHCI_INTERFACE_SINGLE_UNI);
-}
-
-#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
-#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE)
-
-static int devboard_isp1105_init(struct usb_phy *otg)
-{
- int ret = gpio_request(USBH1_MODE, "usbh1-mode");
- if (ret)
- return ret;
- /* single ended */
- gpio_direction_output(USBH1_MODE, 0);
-
- ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
- if (ret) {
- gpio_free(USBH1_MODE);
- return ret;
- }
- gpio_direction_output(USBH1_VBUSEN_B, 1);
-
- return 0;
-}
-
-
-static int devboard_isp1105_set_vbus(struct usb_otg *otg, bool on)
-{
- if (on)
- gpio_set_value(USBH1_VBUSEN_B, 0);
- else
- gpio_set_value(USBH1_VBUSEN_B, 1);
-
- return 0;
-}
-
-static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
- .init = devboard_usbh1_hw_init,
- .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-};
-
-static int __init devboard_usbh1_init(void)
-{
- struct usb_phy *phy;
- struct platform_device *pdev;
-
- phy = kzalloc(sizeof(*phy), GFP_KERNEL);
- if (!phy)
- return -ENOMEM;
-
- phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
- if (!phy->otg) {
- kfree(phy);
- return -ENOMEM;
- }
-
- phy->label = "ISP1105";
- phy->init = devboard_isp1105_init;
- phy->otg->set_vbus = devboard_isp1105_set_vbus;
-
- usbh1_pdata.otg = phy;
-
- pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
-
- return PTR_ERR_OR_ZERO(pdev);
-}
-
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
-/*
- * system init for baseboard usage. Will be called by mx31moboard init.
- */
-void __init mx31moboard_devboard_init(void)
-{
- printk(KERN_INFO "Initializing mx31devboard peripherals\n");
-
- mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
- "devboard");
-
- imx31_add_imx_uart1(&uart_pdata);
-
- imx31_add_mxc_mmc(1, &sdhc2_pdata);
-
- devboard_init_sel_gpios();
-
- imx31_add_fsl_usb2_udc(&usb_pdata);
-
- devboard_usbh1_init();
-}
diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c
deleted file mode 100644
index c269000..0000000
--- a/arch/arm/mach-imx/mx31moboard-marxbot.c
+++ /dev/null
@@ -1,270 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/spi/spi.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-
-#include <linux/usb/otg.h>
-
-#include "board-mx31moboard.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-#include "ulpi.h"
-
-static unsigned int marxbot_pins[] = {
- /* SDHC2 */
- MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
- MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
- MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
- MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
- /* dsPIC resets */
- MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
- /*battery detection */
- MX31_PIN_LCS0__GPIO3_23,
- /* USB H1 */
- MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
- MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
- MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
- MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
- MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
- /* SEL */
- MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
- MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
-};
-
-#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
-#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
-
-static int marxbot_sdhc2_get_ro(struct device *dev)
-{
- return !gpio_get_value(SDHC2_WP);
-}
-
-static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- int ret;
-
- ret = gpio_request(SDHC2_CD, "sdhc-detect");
- if (ret)
- return ret;
-
- gpio_direction_input(SDHC2_CD);
-
- ret = gpio_request(SDHC2_WP, "sdhc-wp");
- if (ret)
- goto err_gpio_free;
- gpio_direction_input(SDHC2_WP);
-
- ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "sdhc2-card-detect", data);
- if (ret)
- goto err_gpio_free_2;
-
- return 0;
-
-err_gpio_free_2:
- gpio_free(SDHC2_WP);
-err_gpio_free:
- gpio_free(SDHC2_CD);
-
- return ret;
-}
-
-static void marxbot_sdhc2_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(SDHC2_CD), data);
- gpio_free(SDHC2_WP);
- gpio_free(SDHC2_CD);
-}
-
-static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
- .get_ro = marxbot_sdhc2_get_ro,
- .init = marxbot_sdhc2_init,
- .exit = marxbot_sdhc2_exit,
-};
-
-#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_STXD5)
-#define DSPICS_RST_B IOMUX_TO_GPIO(MX31_PIN_SRXD5)
-
-static void dspics_resets_init(void)
-{
- if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
- gpio_direction_output(TRSLAT_RST_B, 0);
- gpio_export(TRSLAT_RST_B, false);
- }
-
- if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
- gpio_direction_output(DSPICS_RST_B, 0);
- gpio_export(DSPICS_RST_B, false);
- }
-}
-
-static struct spi_board_info marxbot_spi_board_info[] __initdata = {
- {
- .modalias = "spidev",
- .max_speed_hz = 300000,
- .bus_num = 1,
- .chip_select = 1, /* according spi1_cs[] ! */
- },
-};
-
-#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
-#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
-#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
-
-static void marxbot_init_sel_gpios(void)
-{
- if (!gpio_request(SEL0, "sel0")) {
- gpio_direction_input(SEL0);
- gpio_export(SEL0, true);
- }
-
- if (!gpio_request(SEL1, "sel1")) {
- gpio_direction_input(SEL1);
- gpio_export(SEL1, true);
- }
-
- if (!gpio_request(SEL2, "sel2")) {
- gpio_direction_input(SEL2);
- gpio_export(SEL2, true);
- }
-
- if (!gpio_request(SEL3, "sel3")) {
- gpio_direction_input(SEL3);
- gpio_export(SEL3, true);
- }
-}
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int marxbot_usbh1_hw_init(struct platform_device *pdev)
-{
- mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
-
- mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
-
- mdelay(10);
-
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
- MXC_EHCI_INTERFACE_SINGLE_UNI);
-}
-
-#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
-#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE)
-
-static int marxbot_isp1105_init(struct usb_phy *otg)
-{
- int ret = gpio_request(USBH1_MODE, "usbh1-mode");
- if (ret)
- return ret;
- /* single ended */
- gpio_direction_output(USBH1_MODE, 0);
-
- ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
- if (ret) {
- gpio_free(USBH1_MODE);
- return ret;
- }
- gpio_direction_output(USBH1_VBUSEN_B, 1);
-
- return 0;
-}
-
-
-static int marxbot_isp1105_set_vbus(struct usb_otg *otg, bool on)
-{
- if (on)
- gpio_set_value(USBH1_VBUSEN_B, 0);
- else
- gpio_set_value(USBH1_VBUSEN_B, 1);
-
- return 0;
-}
-
-static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
- .init = marxbot_usbh1_hw_init,
- .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-};
-
-static int __init marxbot_usbh1_init(void)
-{
- struct usb_phy *phy;
- struct platform_device *pdev;
-
- phy = kzalloc(sizeof(*phy), GFP_KERNEL);
- if (!phy)
- return -ENOMEM;
-
- phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
- if (!phy->otg) {
- kfree(phy);
- return -ENOMEM;
- }
-
- phy->label = "ISP1105";
- phy->init = marxbot_isp1105_init;
- phy->otg->set_vbus = marxbot_isp1105_set_vbus;
-
- usbh1_pdata.otg = phy;
-
- pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
-
- return PTR_ERR_OR_ZERO(pdev);
-}
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
-/*
- * system init for baseboard usage. Will be called by mx31moboard init.
- */
-void __init mx31moboard_marxbot_init(void)
-{
- printk(KERN_INFO "Initializing mx31marxbot peripherals\n");
-
- mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
- "marxbot");
-
- marxbot_init_sel_gpios();
-
- dspics_resets_init();
-
- imx31_add_mxc_mmc(1, &sdhc2_pdata);
-
- spi_register_board_info(marxbot_spi_board_info,
- ARRAY_SIZE(marxbot_spi_board_info));
-
- /* battery present pin */
- gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present");
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
- gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
-
- imx31_add_fsl_usb2_udc(&usb_pdata);
-
- marxbot_usbh1_init();
-}
diff --git a/arch/arm/mach-imx/mx31moboard-smartbot.c b/arch/arm/mach-imx/mx31moboard-smartbot.c
deleted file mode 100644
index d165bd9..0000000
--- a/arch/arm/mach-imx/mx31moboard-smartbot.c
+++ /dev/null
@@ -1,124 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include "board-mx31moboard.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-#include "ulpi.h"
-
-static unsigned int smartbot_pins[] = {
- /* UART1 */
- MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
- MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
- /* ENABLES */
- MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
- MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
-#if defined(CONFIG_USB_ULPI)
-
-static int smartbot_otg_init(struct platform_device *pdev)
-{
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static struct mxc_usbh_platform_data otg_host_pdata __initdata = {
- .init = smartbot_otg_init,
- .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-static int __init smartbot_otg_host_init(void)
-{
- struct platform_device *pdev;
-
- otg_host_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (!otg_host_pdata.otg)
- return -ENODEV;
-
- pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata);
-
- return PTR_ERR_OR_ZERO(pdev);
-}
-#else
-static inline int smartbot_otg_host_init(void) { return 0; }
-#endif
-
-#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
-#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
-#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define TRSLAT_SRC_CHOICE IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
-
-static void smartbot_resets_init(void)
-{
- if (!gpio_request(POWER_EN, "power-enable")) {
- gpio_direction_output(POWER_EN, 0);
- gpio_export(POWER_EN, false);
- }
-
- if (!gpio_request(DSPIC_RST_B, "dspic-rst")) {
- gpio_direction_output(DSPIC_RST_B, 0);
- gpio_export(DSPIC_RST_B, false);
- }
-
- if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
- gpio_direction_output(TRSLAT_RST_B, 0);
- gpio_export(TRSLAT_RST_B, false);
- }
-
- if (!gpio_request(TRSLAT_SRC_CHOICE, "translator-src-choice")) {
- gpio_direction_output(TRSLAT_SRC_CHOICE, 0);
- gpio_export(TRSLAT_SRC_CHOICE, false);
- }
-}
-/*
- * system init for baseboard usage. Will be called by mx31moboard init.
- */
-void __init mx31moboard_smartbot_init(int board)
-{
- printk(KERN_INFO "Initializing mx31smartbot peripherals\n");
-
- mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins),
- "smartbot");
-
- imx31_add_imx_uart1(&uart_pdata);
-
- switch (board) {
- case MX31SMARTBOT:
- imx31_add_fsl_usb2_udc(&usb_pdata);
- break;
- case MX31EYEBOT:
- smartbot_otg_host_init();
- break;
- default:
- printk(KERN_WARNING "Unknown board %d, USB OTG not initialized",
- board);
- }
-
- smartbot_resets_init();
-}
diff --git a/arch/arm/mach-imx/mx35.h b/arch/arm/mach-imx/mx35.h
index 760de6a..5a8a87a 100644
--- a/arch/arm/mach-imx/mx35.h
+++ b/arch/arm/mach-imx/mx35.h
@@ -2,190 +2,17 @@
#ifndef __MACH_MX35_H__
#define __MACH_MX35_H__
-/*
- * IRAM
- */
-#define MX35_IRAM_BASE_ADDR 0x10000000 /* internal ram */
-#define MX35_IRAM_SIZE SZ_128K
-
-#define MX35_L2CC_BASE_ADDR 0x30000000
-#define MX35_L2CC_SIZE SZ_1M
-
#define MX35_AIPS1_BASE_ADDR 0x43f00000
#define MX35_AIPS1_SIZE SZ_1M
-#define MX35_MAX_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x04000)
-#define MX35_EVTMON_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x08000)
-#define MX35_CLKCTL_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x0c000)
-#define MX35_ETB_SLOT4_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x10000)
-#define MX35_ETB_SLOT5_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x14000)
-#define MX35_ECT_CTIO_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x18000)
-#define MX35_I2C1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x80000)
-#define MX35_I2C3_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x84000)
-#define MX35_UART1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x90000)
-#define MX35_UART2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x94000)
-#define MX35_I2C2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x98000)
-#define MX35_OWIRE_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x9c000)
-#define MX35_SSI1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa0000)
-#define MX35_CSPI1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa4000)
-#define MX35_KPP_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa8000)
-#define MX35_IOMUXC_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xac000)
-#define MX35_ECT_IP1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xb8000)
-#define MX35_ECT_IP2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xbc000)
-
#define MX35_SPBA0_BASE_ADDR 0x50000000
#define MX35_SPBA0_SIZE SZ_1M
-#define MX35_UART3_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x0c000)
-#define MX35_CSPI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x10000)
-#define MX35_SSI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x14000)
-#define MX35_ATA_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x20000)
-#define MX35_MSHC1_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x24000)
-#define MX35_FEC_BASE_ADDR 0x50038000
-#define MX35_SPBA_CTRL_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x3c000)
-
#define MX35_AIPS2_BASE_ADDR 0x53f00000
#define MX35_AIPS2_SIZE SZ_1M
-#define MX35_CCM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x80000)
-#define MX35_GPT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x90000)
-#define MX35_EPIT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x94000)
-#define MX35_EPIT2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x98000)
-#define MX35_GPIO3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xa4000)
-#define MX35_SCC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xac000)
-#define MX35_RNGA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb0000)
-#define MX35_ESDHC1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb4000)
-#define MX35_ESDHC2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb8000)
-#define MX35_ESDHC3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xbc000)
-#define MX35_IPU_CTRL_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc0000)
-#define MX35_AUDMUX_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc4000)
-#define MX35_GPIO1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xcc000)
-#define MX35_GPIO2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd0000)
-#define MX35_SDMA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd4000)
-#define MX35_RTC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd8000)
-#define MX35_WDOG_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xdc000)
-#define MX35_PWM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe0000)
-#define MX35_CAN1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe4000)
-#define MX35_CAN2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe8000)
-#define MX35_RTIC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xec000)
-#define MX35_IIM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf0000)
-#define MX35_USB_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf4000)
-#define MX35_USB_OTG_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0000)
-/*
- * The Reference Manual (IMX35RM, Rev. 2, 3/2009) claims an offset of 0x200 for
- * HS. When host support was implemented only a preliminary document was
- * available, which told 0x400. This works fine.
- */
-#define MX35_USB_HS_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0400)
-
-#define MX35_ROMP_BASE_ADDR 0x60000000
-#define MX35_ROMP_SIZE SZ_1M
-
#define MX35_AVIC_BASE_ADDR 0x68000000
#define MX35_AVIC_SIZE SZ_1M
-
-/*
- * Memory regions and CS
- */
-#define MX35_IPU_MEM_BASE_ADDR 0x70000000
-#define MX35_CSD0_BASE_ADDR 0x80000000
-#define MX35_CSD1_BASE_ADDR 0x90000000
-
-#define MX35_CS0_BASE_ADDR 0xa0000000
-#define MX35_CS1_BASE_ADDR 0xa8000000
-#define MX35_CS2_BASE_ADDR 0xb0000000
-#define MX35_CS3_BASE_ADDR 0xb2000000
-
-#define MX35_CS4_BASE_ADDR 0xb4000000
-#define MX35_CS4_BASE_ADDR_VIRT 0xf6000000
-#define MX35_CS4_SIZE SZ_32M
-
-#define MX35_CS5_BASE_ADDR 0xb6000000
-#define MX35_CS5_BASE_ADDR_VIRT 0xf8000000
-#define MX35_CS5_SIZE SZ_32M
-
-/*
- * NAND, SDRAM, WEIM, M3IF, EMI controllers
- */
#define MX35_X_MEMC_BASE_ADDR 0xb8000000
#define MX35_X_MEMC_SIZE SZ_64K
-#define MX35_ESDCTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x1000)
-#define MX35_WEIM_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x2000)
-#define MX35_M3IF_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x3000)
-#define MX35_EMI_CTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x4000)
-#define MX35_PCMCIA_CTL_BASE_ADDR MX35_EMI_CTL_BASE_ADDR
-
-#define MX35_NFC_BASE_ADDR 0xbb000000
-#define MX35_PCMCIA_MEM_BASE_ADDR 0xbc000000
#define MX35_IO_P2V(x) IMX_IO_P2V(x)
-#define MX35_IO_ADDRESS(x) IOMEM(MX35_IO_P2V(x))
-
-/*
- * Interrupt numbers
- */
-#include <asm/irq.h>
-#define MX35_INT_OWIRE (NR_IRQS_LEGACY + 2)
-#define MX35_INT_I2C3 (NR_IRQS_LEGACY + 3)
-#define MX35_INT_I2C2 (NR_IRQS_LEGACY + 4)
-#define MX35_INT_RTIC (NR_IRQS_LEGACY + 6)
-#define MX35_INT_ESDHC1 (NR_IRQS_LEGACY + 7)
-#define MX35_INT_ESDHC2 (NR_IRQS_LEGACY + 8)
-#define MX35_INT_ESDHC3 (NR_IRQS_LEGACY + 9)
-#define MX35_INT_I2C1 (NR_IRQS_LEGACY + 10)
-#define MX35_INT_SSI1 (NR_IRQS_LEGACY + 11)
-#define MX35_INT_SSI2 (NR_IRQS_LEGACY + 12)
-#define MX35_INT_CSPI2 (NR_IRQS_LEGACY + 13)
-#define MX35_INT_CSPI1 (NR_IRQS_LEGACY + 14)
-#define MX35_INT_ATA (NR_IRQS_LEGACY + 15)
-#define MX35_INT_GPU2D (NR_IRQS_LEGACY + 16)
-#define MX35_INT_ASRC (NR_IRQS_LEGACY + 17)
-#define MX35_INT_UART3 (NR_IRQS_LEGACY + 18)
-#define MX35_INT_IIM (NR_IRQS_LEGACY + 19)
-#define MX35_INT_RNGA (NR_IRQS_LEGACY + 22)
-#define MX35_INT_EVTMON (NR_IRQS_LEGACY + 23)
-#define MX35_INT_KPP (NR_IRQS_LEGACY + 24)
-#define MX35_INT_RTC (NR_IRQS_LEGACY + 25)
-#define MX35_INT_PWM (NR_IRQS_LEGACY + 26)
-#define MX35_INT_EPIT2 (NR_IRQS_LEGACY + 27)
-#define MX35_INT_EPIT1 (NR_IRQS_LEGACY + 28)
-#define MX35_INT_GPT (NR_IRQS_LEGACY + 29)
-#define MX35_INT_POWER_FAIL (NR_IRQS_LEGACY + 30)
-#define MX35_INT_UART2 (NR_IRQS_LEGACY + 32)
-#define MX35_INT_NFC (NR_IRQS_LEGACY + 33)
-#define MX35_INT_SDMA (NR_IRQS_LEGACY + 34)
-#define MX35_INT_USB_HS (NR_IRQS_LEGACY + 35)
-#define MX35_INT_USB_OTG (NR_IRQS_LEGACY + 37)
-#define MX35_INT_MSHC1 (NR_IRQS_LEGACY + 39)
-#define MX35_INT_ESAI (NR_IRQS_LEGACY + 40)
-#define MX35_INT_IPU_ERR (NR_IRQS_LEGACY + 41)
-#define MX35_INT_IPU_SYN (NR_IRQS_LEGACY + 42)
-#define MX35_INT_CAN1 (NR_IRQS_LEGACY + 43)
-#define MX35_INT_CAN2 (NR_IRQS_LEGACY + 44)
-#define MX35_INT_UART1 (NR_IRQS_LEGACY + 45)
-#define MX35_INT_MLB (NR_IRQS_LEGACY + 46)
-#define MX35_INT_SPDIF (NR_IRQS_LEGACY + 47)
-#define MX35_INT_ECT (NR_IRQS_LEGACY + 48)
-#define MX35_INT_SCC_SCM (NR_IRQS_LEGACY + 49)
-#define MX35_INT_SCC_SMN (NR_IRQS_LEGACY + 50)
-#define MX35_INT_GPIO2 (NR_IRQS_LEGACY + 51)
-#define MX35_INT_GPIO1 (NR_IRQS_LEGACY + 52)
-#define MX35_INT_WDOG (NR_IRQS_LEGACY + 55)
-#define MX35_INT_GPIO3 (NR_IRQS_LEGACY + 56)
-#define MX35_INT_FEC (NR_IRQS_LEGACY + 57)
-#define MX35_INT_EXT_POWER (NR_IRQS_LEGACY + 58)
-#define MX35_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59)
-#define MX35_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60)
-#define MX35_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61)
-#define MX35_INT_EXT_WDOG (NR_IRQS_LEGACY + 62)
-#define MX35_INT_EXT_TV (NR_IRQS_LEGACY + 63)
-
-#define MX35_DMA_REQ_SSI2_RX1 22
-#define MX35_DMA_REQ_SSI2_TX1 23
-#define MX35_DMA_REQ_SSI2_RX0 24
-#define MX35_DMA_REQ_SSI2_TX0 25
-#define MX35_DMA_REQ_SSI1_RX1 26
-#define MX35_DMA_REQ_SSI1_TX1 27
-#define MX35_DMA_REQ_SSI1_RX0 28
-#define MX35_DMA_REQ_SSI1_TX0 29
-
-#define MX35_PROD_SIGNATURE 0x1 /* For MX31 */
#endif /* ifndef __MACH_MX35_H__ */
diff --git a/arch/arm/mach-imx/pcm037.h b/arch/arm/mach-imx/pcm037.h
deleted file mode 100644
index 470d3c8..0000000
--- a/arch/arm/mach-imx/pcm037.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __PCM037_H__
-#define __PCM037_H__
-
-enum pcm037_board_variant {
- PCM037_PCM970,
- PCM037_EET,
-};
-
-extern enum pcm037_board_variant pcm037_variant(void);
-
-#ifdef CONFIG_MACH_PCM037_EET
-int pcm037_eet_init_devices(void);
-#else
-static inline int pcm037_eet_init_devices(void) { return 0; }
-#endif
-
-#endif
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index d943535..020e6de 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -7,6 +7,7 @@
* modify it under the terms of the GNU General Public License.
*/
+#include <linux/of_address.h>
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
@@ -15,13 +16,20 @@
static int mx27_suspend_enter(suspend_state_t state)
{
+ void __iomem *ccm_base;
+ struct device_node *np;
u32 cscr;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
+ ccm_base = of_iomap(np, 0);
+ BUG_ON(!ccm_base);
+
switch (state) {
case PM_SUSPEND_MEM:
/* Clear MPEN and SPEN to disable MPLL/SPLL */
- cscr = imx_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
+ cscr = imx_readl(ccm_base);
cscr &= 0xFFFFFFFC;
- imx_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
+ imx_writel(cscr, ccm_base);
/* Executes WFI */
cpu_do_idle();
break;
diff --git a/arch/arm/mach-imx/ulpi.h b/arch/arm/mach-imx/ulpi.h
deleted file mode 100644
index b367902..0000000
--- a/arch/arm/mach-imx/ulpi.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_ULPI_H
-#define __MACH_ULPI_H
-
-#include <linux/usb/ulpi.h>
-
-#ifdef CONFIG_USB_ULPI_VIEWPORT
-static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
-{
- return otg_ulpi_create(&ulpi_viewport_access_ops, flags);
-}
-#else
-static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
-{
- return NULL;
-}
-#endif
-
-#endif /* __MACH_ULPI_H */
-
diff --git a/arch/arm/mach-mstar/Kconfig b/arch/arm/mach-mstar/Kconfig
index 52744fe..576d1ab 100644
--- a/arch/arm/mach-mstar/Kconfig
+++ b/arch/arm/mach-mstar/Kconfig
@@ -3,6 +3,7 @@
depends on ARCH_MULTI_V7
select ARM_GIC
select ARM_HEAVY_MB
+ select MST_IRQ
help
Support for newer MStar/Sigmastar SoC families that are
based on Armv7 cores like the Cortex A7 and share the same
diff --git a/arch/arm/mach-omap1/include/mach/mux.h b/arch/arm/mach-omap1/include/mach/mux.h
index adfe1f6..3f6dc55 100644
--- a/arch/arm/mach-omap1/include/mach/mux.h
+++ b/arch/arm/mach-omap1/include/mach/mux.h
@@ -88,7 +88,7 @@
* OMAP730/850 has a slightly different config for the pin mux.
* - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and
* not the FUNC_MUX_CTRL_x regs from hardware.h
- * - for pull-up/down, only has one enable bit which is is in the same register
+ * - for pull-up/down, only has one enable bit which is in the same register
* as mux config
*/
#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index ea23205..3ee7bdf 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -7,6 +7,7 @@
depends on ARCH_MULTI_V6
select ARCH_OMAP2PLUS
select CPU_V6
+ select PM_GENERIC_DOMAINS if PM
select SOC_HAS_OMAP2_SDRC
config ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/am33xx.h b/arch/arm/mach-omap2/am33xx.h
index 5eef093..bf2b5f8 100644
--- a/arch/arm/mach-omap2/am33xx.h
+++ b/arch/arm/mach-omap2/am33xx.h
@@ -1,7 +1,7 @@
/*
* This file contains the address info for various AM33XX modules.
*
- * Copyright (C) 2011 Texas Instruments, Inc. - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments, Inc. - https://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 334923d..7290f03 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -3,7 +3,7 @@
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
*
* Modified from the original mach-omap/omap2/board-generic.c did by Paul
* to support the OMAP2+ device tree boards with an unique board file.
diff --git a/arch/arm/mach-omap2/clockdomains33xx_data.c b/arch/arm/mach-omap2/clockdomains33xx_data.c
index 32c90fd..b4d5144 100644
--- a/arch/arm/mach-omap2/clockdomains33xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains33xx_data.c
@@ -1,7 +1,7 @@
/*
* AM33XX Clock Domain data.
*
- * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
* Vaibhav Hiremath <hvaibhav@ti.com>
*
* This program is free software; you can redistribute it and/or
diff --git a/arch/arm/mach-omap2/clockdomains81xx_data.c b/arch/arm/mach-omap2/clockdomains81xx_data.c
index 65fbd13..127dc7a 100644
--- a/arch/arm/mach-omap2/clockdomains81xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains81xx_data.c
@@ -1,7 +1,7 @@
/*
* TI81XX Clock Domain data.
*
- * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments, Inc. - https://www.ti.com/
* Copyright (C) 2013 SKTB SKiT, http://www.skitlab.ru/
*
* This program is free software; you can redistribute it and/or
diff --git a/arch/arm/mach-omap2/cm-regbits-33xx.h b/arch/arm/mach-omap2/cm-regbits-33xx.h
index c0823fd..e7ae2bb 100644
--- a/arch/arm/mach-omap2/cm-regbits-33xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-33xx.h
@@ -4,7 +4,7 @@
* This file is automatically generated from the AM33XX hardware databases.
* Vaibhav Hiremath <hvaibhav@ti.com>
*
- * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
diff --git a/arch/arm/mach-omap2/cm-regbits-54xx.h b/arch/arm/mach-omap2/cm-regbits-54xx.h
index 44663b5..fc88688 100644
--- a/arch/arm/mach-omap2/cm-regbits-54xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-54xx.h
@@ -2,7 +2,7 @@
/*
* OMAP54xx Clock Management register bits
*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
*
* Paul Walmsley (paul@pwsan.com)
* Rajendra Nayak (rnayak@ti.com)
diff --git a/arch/arm/mach-omap2/cm-regbits-7xx.h b/arch/arm/mach-omap2/cm-regbits-7xx.h
index a78ccba..2725af4 100644
--- a/arch/arm/mach-omap2/cm-regbits-7xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-7xx.h
@@ -2,7 +2,7 @@
/*
* DRA7xx Clock Management register bits
*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
*
* Generated by code originally written by:
* Paul Walmsley (paul@pwsan.com)
diff --git a/arch/arm/mach-omap2/cm1_54xx.h b/arch/arm/mach-omap2/cm1_54xx.h
index 7be363a..eb86bbd 100644
--- a/arch/arm/mach-omap2/cm1_54xx.h
+++ b/arch/arm/mach-omap2/cm1_54xx.h
@@ -2,7 +2,7 @@
/*
* OMAP54xx CM1 instance offset macros
*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
*
* Paul Walmsley (paul@pwsan.com)
* Rajendra Nayak (rnayak@ti.com)
diff --git a/arch/arm/mach-omap2/cm1_7xx.h b/arch/arm/mach-omap2/cm1_7xx.h
index 28660ed..aae3831 100644
--- a/arch/arm/mach-omap2/cm1_7xx.h
+++ b/arch/arm/mach-omap2/cm1_7xx.h
@@ -2,7 +2,7 @@
/*
* DRA7xx CM1 instance offset macros
*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
*
* Generated by code originally written by:
* Paul Walmsley (paul@pwsan.com)
diff --git a/arch/arm/mach-omap2/cm2_54xx.h b/arch/arm/mach-omap2/cm2_54xx.h
index c5da1f5..8e49765 100644
--- a/arch/arm/mach-omap2/cm2_54xx.h
+++ b/arch/arm/mach-omap2/cm2_54xx.h
@@ -2,7 +2,7 @@
/*
* OMAP54xx CM2 instance offset macros
*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
*
* Paul Walmsley (paul@pwsan.com)
* Rajendra Nayak (rnayak@ti.com)
diff --git a/arch/arm/mach-omap2/cm2_7xx.h b/arch/arm/mach-omap2/cm2_7xx.h
index e16fc58..f873460 100644
--- a/arch/arm/mach-omap2/cm2_7xx.h
+++ b/arch/arm/mach-omap2/cm2_7xx.h
@@ -2,7 +2,7 @@
/*
* DRA7xx CM2 instance offset macros
*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
*
* Generated by code originally written by:
* Paul Walmsley (paul@pwsan.com)
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index 084d454..ac4882e 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -1,7 +1,7 @@
/*
* AM33XX CM functions
*
- * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
* Vaibhav Hiremath <hvaibhav@ti.com>
*
* Reference taken from from OMAP4 cminst44xx.c
diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h
index a91f7d2..63b362b 100644
--- a/arch/arm/mach-omap2/cm33xx.h
+++ b/arch/arm/mach-omap2/cm33xx.h
@@ -1,7 +1,7 @@
/*
* AM33XX CM offset macros
*
- * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
* Vaibhav Hiremath <hvaibhav@ti.com>
*
* This program is free software; you can redistribute it and/or
diff --git a/arch/arm/mach-omap2/cm81xx.h b/arch/arm/mach-omap2/cm81xx.h
index 5d73a10..bd91223 100644
--- a/arch/arm/mach-omap2/cm81xx.h
+++ b/arch/arm/mach-omap2/cm81xx.h
@@ -1,7 +1,7 @@
/*
* Clock domain register offsets for TI81XX.
*
- * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments, Inc. - https://www.ti.com/
* Copyright (C) 2013 SKTB SKiT, http://www.skitlab.ru/
*
* This program is free software; you can redistribute it and/or
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index 6f5f897..a92d277 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -174,8 +174,10 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
*/
if (mpuss_can_lose_context) {
error = cpu_cluster_pm_enter();
- if (error)
+ if (error) {
+ omap_set_pwrdm_state(mpu_pd, PWRDM_POWER_ON);
goto cpu_cluster_pm_out;
+ }
}
}
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 46012ca..2000fca 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -1,7 +1,7 @@
/*
* OMAP2plus display device setup / initialization.
*
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
* Senthilvadivu Guruswamy
* Sumit Semwal
*
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index 8cc109cc..dfc9b21 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -13,7 +13,7 @@
* Copyright (C) 2009 Texas Instruments
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
* Converted DMA library into platform driver
* - G, Manjunath Kondaiah <manjugk@ti.com>
*/
diff --git a/arch/arm/mach-omap2/l3_2xxx.h b/arch/arm/mach-omap2/l3_2xxx.h
index c2bd8d8..6297c62 100644
--- a/arch/arm/mach-omap2/l3_2xxx.h
+++ b/arch/arm/mach-omap2/l3_2xxx.h
@@ -2,7 +2,7 @@
/*
* arch/arm/plat-omap/include/plat/l3_2xxx.h - L3 firewall definitions
*
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
* Sumit Semwal
*/
#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
diff --git a/arch/arm/mach-omap2/l3_3xxx.h b/arch/arm/mach-omap2/l3_3xxx.h
index 995ebcc..60ea7b2 100644
--- a/arch/arm/mach-omap2/l3_3xxx.h
+++ b/arch/arm/mach-omap2/l3_3xxx.h
@@ -2,7 +2,7 @@
/*
* arch/arm/plat-omap/include/plat/l3_3xxx.h - L3 firewall definitions
*
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
* Sumit Semwal
*/
#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H
diff --git a/arch/arm/mach-omap2/l4_2xxx.h b/arch/arm/mach-omap2/l4_2xxx.h
index 556e69c..418e107 100644
--- a/arch/arm/mach-omap2/l4_2xxx.h
+++ b/arch/arm/mach-omap2/l4_2xxx.h
@@ -2,7 +2,7 @@
/*
* arch/arm/plat-omap/include/plat/l4_2xxx.h - L4 firewall definitions
*
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
* Sumit Semwal
*/
#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index bfa5e1b..93c20bb 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -2,7 +2,7 @@
/*
* OMAP IOMMU quirks for various TI SoCs
*
- * Copyright (C) 2015-2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015-2019 Texas Instruments Incorporated - https://www.ti.com/
* Suman Anna <s-anna@ti.com>
*/
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
index 5f4ab24..e298410 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
@@ -26,7 +26,6 @@ extern struct omap_hwmod_ocp_if am33xx_mpu__prcm;
extern struct omap_hwmod_ocp_if am33xx_l3_s__l3_main;
extern struct omap_hwmod_ocp_if am33xx_gfx__l3_main;
extern struct omap_hwmod_ocp_if am33xx_l3_main__gfx;
-extern struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc;
extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer2;
extern struct omap_hwmod_ocp_if am33xx_l3_main__ocmc;
@@ -43,7 +42,6 @@ extern struct omap_hwmod am33xx_ocmcram_hwmod;
extern struct omap_hwmod am33xx_smartreflex0_hwmod;
extern struct omap_hwmod am33xx_smartreflex1_hwmod;
extern struct omap_hwmod am33xx_gpmc_hwmod;
-extern struct omap_hwmod am33xx_rtc_hwmod;
extern struct omap_hwmod_class am33xx_emif_hwmod_class;
extern struct omap_hwmod_class am33xx_l4_hwmod_class;
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
index b389d65..ab5146b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
@@ -74,30 +74,6 @@ struct omap_hwmod_ocp_if am33xx_l3_s__l3_main = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* gfx -> l3 main */
-struct omap_hwmod_ocp_if am33xx_gfx__l3_main = {
- .master = &am33xx_gfx_hwmod,
- .slave = &am33xx_l3_main_hwmod,
- .clk = "dpll_core_m4_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3 main -> gfx */
-struct omap_hwmod_ocp_if am33xx_l3_main__gfx = {
- .master = &am33xx_l3_main_hwmod,
- .slave = &am33xx_gfx_hwmod,
- .clk = "dpll_core_m4_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 wkup -> rtc */
-struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc = {
- .master = &am33xx_l4_wkup_hwmod,
- .slave = &am33xx_rtc_hwmod,
- .clk = "clkdiv32k_ick",
- .user = OCP_USER_MPU,
-};
-
/* l3s cfg -> gpmc */
struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
.master = &am33xx_l3_s_hwmod,
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index 4b3cd59..bcc120e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -26,7 +26,6 @@
#define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl))
#define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl))
#define RSTST(oh, rstst) ((oh).prcm.omap4.rstst_offs = (rstst))
-#define PRCM_FLAGS(oh, flag) ((oh).prcm.omap4.flags = (flag))
/*
* 'l3' class
@@ -133,30 +132,6 @@ struct omap_hwmod_class am33xx_wkup_m3_hwmod_class = {
.name = "wkup_m3",
};
-/* gfx */
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod_class am33xx_gfx_hwmod_class = {
- .name = "gfx",
-};
-
-static struct omap_hwmod_rst_info am33xx_gfx_resets[] = {
- { .name = "gfx", .rst_shift = 0, .st_shift = 0},
-};
-
-struct omap_hwmod am33xx_gfx_hwmod = {
- .name = "gfx",
- .class = &am33xx_gfx_hwmod_class,
- .clkdm_name = "gfx_l3_clkdm",
- .main_clk = "gfx_fck_div_ck",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
- .rst_lines = am33xx_gfx_resets,
- .rst_lines_cnt = ARRAY_SIZE(am33xx_gfx_resets),
-};
-
/*
* 'prcm' class
* power and reset manager (whole prcm infrastructure)
@@ -274,67 +249,24 @@ struct omap_hwmod am33xx_gpmc_hwmod = {
},
};
-
-/*
- * 'rtc' class
- * rtc subsystem
- */
-static struct omap_hwmod_class_sysconfig am33xx_rtc_sysc = {
- .rev_offs = 0x0074,
- .sysc_offs = 0x0078,
- .sysc_flags = SYSC_HAS_SIDLEMODE,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO |
- SIDLE_SMART | SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type3,
-};
-
-static struct omap_hwmod_class am33xx_rtc_hwmod_class = {
- .name = "rtc",
- .sysc = &am33xx_rtc_sysc,
- .unlock = &omap_hwmod_rtc_unlock,
- .lock = &omap_hwmod_rtc_lock,
-};
-
-struct omap_hwmod am33xx_rtc_hwmod = {
- .name = "rtc",
- .class = &am33xx_rtc_hwmod_class,
- .clkdm_name = "l4_rtc_clkdm",
- .main_clk = "clk_32768_ck",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
static void omap_hwmod_am33xx_clkctrl(void)
{
CLKCTRL(am33xx_smartreflex0_hwmod,
AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET);
CLKCTRL(am33xx_smartreflex1_hwmod,
AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET);
- PRCM_FLAGS(am33xx_rtc_hwmod, HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET);
CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l4_wkup_hwmod, AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l3_main_hwmod, AM33XX_CM_PER_L3_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_gfx_hwmod, AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET);
CLKCTRL(am33xx_mpu_hwmod , AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l3_instr_hwmod , AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET);
CLKCTRL(am33xx_ocmcram_hwmod , AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET);
}
-static void omap_hwmod_am33xx_rst(void)
-{
- RSTCTRL(am33xx_gfx_hwmod, AM33XX_RM_GFX_RSTCTRL_OFFSET);
- RSTST(am33xx_gfx_hwmod, AM33XX_RM_GFX_RSTST_OFFSET);
-}
-
void omap_hwmod_am33xx_reg(void)
{
omap_hwmod_am33xx_clkctrl();
- omap_hwmod_am33xx_rst();
}
static void omap_hwmod_am43xx_clkctrl(void)
@@ -343,25 +275,16 @@ static void omap_hwmod_am43xx_clkctrl(void)
AM43XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET);
CLKCTRL(am33xx_smartreflex1_hwmod,
AM43XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_rtc_hwmod, AM43XX_CM_RTC_RTC_CLKCTRL_OFFSET);
CLKCTRL(am33xx_gpmc_hwmod, AM43XX_CM_PER_GPMC_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l4_ls_hwmod, AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l4_wkup_hwmod, AM43XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l3_main_hwmod, AM43XX_CM_PER_L3_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_gfx_hwmod, AM43XX_CM_GFX_GFX_CLKCTRL_OFFSET);
CLKCTRL(am33xx_mpu_hwmod , AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l3_instr_hwmod , AM43XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET);
CLKCTRL(am33xx_ocmcram_hwmod , AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET);
}
-static void omap_hwmod_am43xx_rst(void)
-{
- RSTCTRL(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTCTRL_OFFSET);
- RSTST(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTST_OFFSET);
-}
-
void omap_hwmod_am43xx_reg(void)
{
omap_hwmod_am43xx_clkctrl();
- omap_hwmod_am43xx_rst();
}
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 3cf9c4c..b232f6c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -1,7 +1,7 @@
/*
* omap_hwmod_33xx_data.c: Hardware modules present on the AM33XX chips
*
- * Copyright (C) {2012} Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) {2012} Texas Instruments Incorporated - https://www.ti.com/
*
* This file is automatically generated from the AM33XX hardware databases.
* This program is free software; you can redistribute it and/or
@@ -274,16 +274,13 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l3_main__l4_hs,
&am33xx_l3_main__l3_s,
&am33xx_l3_main__l3_instr,
- &am33xx_l3_main__gfx,
&am33xx_l3_s__l3_main,
&am33xx_wkup_m3__l4_wkup,
- &am33xx_gfx__l3_main,
&am33xx_l3_main__debugss,
&am33xx_l4_wkup__wkup_m3,
&am33xx_l4_wkup__control,
&am33xx_l4_wkup__smartreflex0,
&am33xx_l4_wkup__smartreflex1,
- &am33xx_l4_wkup__rtc,
&am33xx_l3_s__gpmc,
&am33xx_l3_main__ocmc,
NULL,
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index b88d12d..b97cb74 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -143,11 +143,9 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am43xx_l3_main__l4_hs,
&am33xx_l3_main__l3_s,
&am33xx_l3_main__l3_instr,
- &am33xx_l3_main__gfx,
&am33xx_l3_s__l3_main,
&am43xx_l3_main__emif,
&am43xx_wkup_m3__l4_wkup,
- &am33xx_gfx__l3_main,
&am43xx_l4_wkup__wkup_m3,
&am43xx_l4_wkup__control,
&am43xx_l4_wkup__smartreflex0,
@@ -157,11 +155,6 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
NULL,
};
-static struct omap_hwmod_ocp_if *am43xx_rtc_hwmod_ocp_ifs[] __initdata = {
- &am33xx_l4_wkup__rtc,
- NULL,
-};
-
int __init am43xx_hwmod_init(void)
{
int ret;
@@ -170,8 +163,5 @@ int __init am43xx_hwmod_init(void)
omap_hwmod_init();
ret = omap_hwmod_register_links(am43xx_hwmod_ocp_ifs);
- if (!ret && of_machine_is_compatible("ti,am4372"))
- ret = omap_hwmod_register_links(am43xx_rtc_hwmod_ocp_ifs);
-
return ret;
}
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 665ca74..37c5911 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -124,21 +124,6 @@ static struct omap_hwmod_class omap44xx_l4_hwmod_class = {
.name = "l4",
};
-/* l4_abe */
-static struct omap_hwmod omap44xx_l4_abe_hwmod = {
- .name = "l4_abe",
- .class = &omap44xx_l4_hwmod_class,
- .clkdm_name = "abe_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_ABE_AESS_CONTEXT_OFFSET,
- .lostcontext_mask = OMAP4430_LOSTMEM_AESSMEM_MASK,
- .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
- },
- },
-};
-
/* l4_cfg */
static struct omap_hwmod omap44xx_l4_cfg_hwmod = {
.name = "l4_cfg",
@@ -771,22 +756,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l3_main_1 -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_abe = {
- .master = &omap44xx_l3_main_1_hwmod,
- .slave = &omap44xx_l4_abe_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_mpu__l4_abe = {
- .master = &omap44xx_mpu_hwmod,
- .slave = &omap44xx_l4_abe_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l3_main_1 -> l4_cfg */
static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_cfg = {
.master = &omap44xx_l3_main_1_hwmod,
@@ -988,8 +957,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l3_main_1__l3_main_3,
&omap44xx_l3_main_2__l3_main_3,
&omap44xx_l4_cfg__l3_main_3,
- &omap44xx_l3_main_1__l4_abe,
- &omap44xx_mpu__l4_abe,
&omap44xx_l3_main_1__l4_cfg,
&omap44xx_l3_main_2__l4_per,
&omap44xx_l4_cfg__l4_wkup,
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 7c38c1b..85b9ab4 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -2,7 +2,7 @@
/*
* Hardware modules present on the OMAP54xx chips
*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
*
* Paul Walmsley
* Benoit Cousson
@@ -121,19 +121,6 @@ static struct omap_hwmod_class omap54xx_l4_hwmod_class = {
.name = "l4",
};
-/* l4_abe */
-static struct omap_hwmod omap54xx_l4_abe_hwmod = {
- .name = "l4_abe",
- .class = &omap54xx_l4_hwmod_class,
- .clkdm_name = "abe_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_ABE_L4_ABE_CLKCTRL_OFFSET,
- .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
- },
- },
-};
-
/* l4_cfg */
static struct omap_hwmod omap54xx_l4_cfg_hwmod = {
.name = "l4_cfg",
@@ -395,22 +382,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_3 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l3_main_1 -> l4_abe */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_abe = {
- .master = &omap54xx_l3_main_1_hwmod,
- .slave = &omap54xx_l4_abe_hwmod,
- .clk = "abe_iclk",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> l4_abe */
-static struct omap_hwmod_ocp_if omap54xx_mpu__l4_abe = {
- .master = &omap54xx_mpu_hwmod,
- .slave = &omap54xx_l4_abe_hwmod,
- .clk = "abe_iclk",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l3_main_1 -> l4_cfg */
static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_cfg = {
.master = &omap54xx_l3_main_1_hwmod,
@@ -478,8 +449,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
&omap54xx_l3_main_1__l3_main_3,
&omap54xx_l3_main_2__l3_main_3,
&omap54xx_l4_cfg__l3_main_3,
- &omap54xx_l3_main_1__l4_abe,
- &omap54xx_mpu__l4_abe,
&omap54xx_l3_main_1__l4_cfg,
&omap54xx_l3_main_2__l4_per,
&omap54xx_l3_main_1__l4_wkup,
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index adb0784..05e163c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -2,7 +2,7 @@
/*
* Hardware modules present on the DRA7xx chips
*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
*
* Paul Walmsley
* Benoit Cousson
@@ -419,41 +419,6 @@ static struct omap_hwmod dra7xx_qspi_hwmod = {
};
/*
- * 'rtcss' class
- *
- */
-static struct omap_hwmod_class_sysconfig dra7xx_rtcss_sysc = {
- .rev_offs = 0x0074,
- .sysc_offs = 0x0078,
- .sysc_flags = SYSC_HAS_SIDLEMODE,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type3,
-};
-
-static struct omap_hwmod_class dra7xx_rtcss_hwmod_class = {
- .name = "rtcss",
- .sysc = &dra7xx_rtcss_sysc,
- .unlock = &omap_hwmod_rtc_unlock,
- .lock = &omap_hwmod_rtc_lock,
-};
-
-/* rtcss */
-static struct omap_hwmod dra7xx_rtcss_hwmod = {
- .name = "rtcss",
- .class = &dra7xx_rtcss_hwmod_class,
- .clkdm_name = "rtc_clkdm",
- .main_clk = "sys_32k_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_RTC_RTCSS_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_RTC_RTCSS_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/*
* 'sata' class
*
*/
@@ -702,14 +667,6 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__qspi = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_per3 -> rtcss */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__rtcss = {
- .master = &dra7xx_l4_per3_hwmod,
- .slave = &dra7xx_rtcss_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l4_cfg -> sata */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__sata = {
.master = &dra7xx_l4_cfg_hwmod,
@@ -786,7 +743,6 @@ static struct omap_hwmod_ocp_if *dra72x_hwmod_ocp_ifs[] __initdata = {
};
static struct omap_hwmod_ocp_if *rtc_hwmod_ocp_ifs[] __initdata = {
- &dra7xx_l4_per3__rtcss,
NULL,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
index 50fb699..450ab99 100644
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -1,7 +1,7 @@
/*
* DM81xx hwmod data.
*
- * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments, Inc. - https://www.ti.com/
* Copyright (C) 2013 SKTB SKiT, http://www.skitlab.ru/
*
* This program is free software; you can redistribute it and/or
diff --git a/arch/arm/mach-omap2/omap_opp_data.h b/arch/arm/mach-omap2/omap_opp_data.h
index 336fdfc..533dd64 100644
--- a/arch/arm/mach-omap2/omap_opp_data.h
+++ b/arch/arm/mach-omap2/omap_opp_data.h
@@ -1,7 +1,7 @@
/*
* OMAP SoC specific OPP Data helpers
*
- * Copyright (C) 2009-2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2009-2010 Texas Instruments Incorporated - https://www.ti.com/
* Nishanth Menon
* Kevin Hilman
* Copyright (C) 2010 Nokia Corporation.
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index d2925e8..6f6a6a6 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -3,7 +3,7 @@
* This file configures the internal USB PHY in OMAP4430. Used
* with TWL6030 transceiver and MUSB on OMAP4430.
*
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com
* Author: Hema HK <hemahk@ti.com>
*/
diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c
index c2d459f..b610c5f 100644
--- a/arch/arm/mach-omap2/opp3xxx_data.c
+++ b/arch/arm/mach-omap2/opp3xxx_data.c
@@ -1,7 +1,7 @@
/*
* OMAP3 OPP table definitions.
*
- * Copyright (C) 2009-2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2009-2010 Texas Instruments Incorporated - https://www.ti.com/
* Nishanth Menon
* Kevin Hilman
* Copyright (C) 2010-2011 Nokia Corporation.
diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c
index 985aeab..d937c5e 100644
--- a/arch/arm/mach-omap2/opp4xxx_data.c
+++ b/arch/arm/mach-omap2/opp4xxx_data.c
@@ -1,7 +1,7 @@
/*
* OMAP4 OPP table definitions.
*
- * Copyright (C) 2010-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010-2012 Texas Instruments Incorporated - https://www.ti.com/
* Nishanth Menon
* Kevin Hilman
* Thara Gopinath
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index fceb1e5..919d35d 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -34,8 +34,6 @@
#include "prm2xxx_3xxx.h"
#include "pm.h"
-u32 enable_off_mode;
-
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/seq_file.h>
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 01ec1ba..da829a9 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -28,6 +28,8 @@
#include "clockdomain.h"
#include "pm.h"
+u32 enable_off_mode;
+
#ifdef CONFIG_SUSPEND
/*
* omap_pm_suspend: points to a function that does the SoC-specific
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 2a883a0..80e84ae 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -49,11 +49,7 @@ static inline int omap4_opp_init(void)
extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
-#ifdef CONFIG_PM_DEBUG
extern u32 enable_off_mode;
-#else
-#define enable_off_mode 0
-#endif
#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c
index 58236c7..56f2c0b 100644
--- a/arch/arm/mach-omap2/pm33xx-core.c
+++ b/arch/arm/mach-omap2/pm33xx-core.c
@@ -2,7 +2,7 @@
/*
* AM33XX Arch Power Management Routines
*
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
* Dave Gerlach
*/
@@ -25,7 +25,6 @@
#include "control.h"
#include "clockdomain.h"
#include "iomap.h"
-#include "omap_hwmod.h"
#include "pm.h"
#include "powerdomain.h"
#include "prm33xx.h"
@@ -36,7 +35,6 @@
static struct powerdomain *cefuse_pwrdm, *gfx_pwrdm, *per_pwrdm, *mpu_pwrdm;
static struct clockdomain *gfx_l4ls_clkdm;
static void __iomem *scu_base;
-static struct omap_hwmod *rtc_oh;
static int (*idle_fn)(u32 wfi_flags);
@@ -267,13 +265,6 @@ static struct am33xx_pm_sram_addr *amx3_get_sram_addrs(void)
return NULL;
}
-static void __iomem *am43xx_get_rtc_base_addr(void)
-{
- rtc_oh = omap_hwmod_lookup("rtc");
-
- return omap_hwmod_get_mpu_rt_va(rtc_oh);
-}
-
static void am43xx_save_context(void)
{
}
@@ -297,16 +288,6 @@ static void am43xx_restore_context(void)
writel_relaxed(0x0, AM33XX_L4_WK_IO_ADDRESS(0x44df2e14));
}
-static void am43xx_prepare_rtc_suspend(void)
-{
- omap_hwmod_enable(rtc_oh);
-}
-
-static void am43xx_prepare_rtc_resume(void)
-{
- omap_hwmod_idle(rtc_oh);
-}
-
static struct am33xx_pm_platform_data am33xx_ops = {
.init = am33xx_suspend_init,
.deinit = amx3_suspend_deinit,
@@ -317,10 +298,7 @@ static struct am33xx_pm_platform_data am33xx_ops = {
.get_sram_addrs = amx3_get_sram_addrs,
.save_context = am33xx_save_context,
.restore_context = am33xx_restore_context,
- .prepare_rtc_suspend = am43xx_prepare_rtc_suspend,
- .prepare_rtc_resume = am43xx_prepare_rtc_resume,
.check_off_mode_enable = am33xx_check_off_mode_enable,
- .get_rtc_base_addr = am43xx_get_rtc_base_addr,
};
static struct am33xx_pm_platform_data am43xx_ops = {
@@ -333,10 +311,7 @@ static struct am33xx_pm_platform_data am43xx_ops = {
.get_sram_addrs = amx3_get_sram_addrs,
.save_context = am43xx_save_context,
.restore_context = am43xx_restore_context,
- .prepare_rtc_suspend = am43xx_prepare_rtc_suspend,
- .prepare_rtc_resume = am43xx_prepare_rtc_resume,
.check_off_mode_enable = am43xx_check_off_mode_enable,
- .get_rtc_base_addr = am43xx_get_rtc_base_addr,
};
static struct am33xx_pm_platform_data *am33xx_pm_get_pdata(void)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index f5dfddf..71c1d18 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -25,6 +25,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/of.h>
#include <linux/omap-gpmc.h>
#include <trace/events/power.h>
@@ -410,7 +411,12 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
if (!pwrst)
return -ENOMEM;
pwrst->pwrdm = pwrdm;
- pwrst->next_state = PWRDM_POWER_RET;
+
+ if (enable_off_mode)
+ pwrst->next_state = PWRDM_POWER_OFF;
+ else
+ pwrst->next_state = PWRDM_POWER_RET;
+
list_add(&pwrst->node, &pwrst_list);
if (pwrdm_has_hdwr_sar(pwrdm))
@@ -444,6 +450,22 @@ static void __init pm_errata_configure(void)
}
}
+static void __init omap3_pm_check_pmic(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "ti,twl4030-power-idle");
+ if (!np)
+ np = of_find_compatible_node(NULL, NULL, "ti,twl4030-power-idle-osc-off");
+
+ if (np) {
+ of_node_put(np);
+ enable_off_mode = 1;
+ } else {
+ enable_off_mode = 0;
+ }
+}
+
int __init omap3_pm_init(void)
{
struct power_state *pwrst, *tmp;
@@ -477,6 +499,8 @@ int __init omap3_pm_init(void)
goto err2;
}
+ omap3_pm_check_pmic();
+
ret = pwrdm_for_each(pwrdms_setup, NULL);
if (ret) {
pr_err("Failed to setup powerdomains\n");
diff --git a/arch/arm/mach-omap2/powerdomains33xx_data.c b/arch/arm/mach-omap2/powerdomains33xx_data.c
index 869adb8..626055e 100644
--- a/arch/arm/mach-omap2/powerdomains33xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains33xx_data.c
@@ -1,7 +1,7 @@
/*
* AM33XX Power domain data
*
- * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
index 7078a61..899da0ae 100644
--- a/arch/arm/mach-omap2/prcm43xx.h
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -1,7 +1,7 @@
/*
* AM43x PRCM defines
*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
diff --git a/arch/arm/mach-omap2/prcm_mpu54xx.h b/arch/arm/mach-omap2/prcm_mpu54xx.h
index 6ef3882..bdbfa07 100644
--- a/arch/arm/mach-omap2/prcm_mpu54xx.h
+++ b/arch/arm/mach-omap2/prcm_mpu54xx.h
@@ -2,7 +2,7 @@
/*
* OMAP54xx PRCM MPU instance offset macros
*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
*
* Paul Walmsley (paul@pwsan.com)
* Rajendra Nayak (rnayak@ti.com)
diff --git a/arch/arm/mach-omap2/prcm_mpu7xx.h b/arch/arm/mach-omap2/prcm_mpu7xx.h
index 33d0013..2e30324 100644
--- a/arch/arm/mach-omap2/prcm_mpu7xx.h
+++ b/arch/arm/mach-omap2/prcm_mpu7xx.h
@@ -2,7 +2,7 @@
/*
* DRA7xx PRCM MPU instance offset macros
*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
*
* Generated by code originally written by:
* Paul Walmsley (paul@pwsan.com)
diff --git a/arch/arm/mach-omap2/prm-regbits-33xx.h b/arch/arm/mach-omap2/prm-regbits-33xx.h
index 84feece..7dfdff0 100644
--- a/arch/arm/mach-omap2/prm-regbits-33xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-33xx.h
@@ -1,7 +1,7 @@
/*
* AM33XX PRM_XXX register bits
*
- * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index d514166..9144cc0 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -1,7 +1,7 @@
/*
* AM33XX PRM functions
*
- * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h
index 66302c6..d0b7404 100644
--- a/arch/arm/mach-omap2/prm33xx.h
+++ b/arch/arm/mach-omap2/prm33xx.h
@@ -1,7 +1,7 @@
/*
* AM33XX PRM instance offset macros
*
- * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
diff --git a/arch/arm/mach-omap2/prm54xx.h b/arch/arm/mach-omap2/prm54xx.h
index ee0f1cc..7329d6f 100644
--- a/arch/arm/mach-omap2/prm54xx.h
+++ b/arch/arm/mach-omap2/prm54xx.h
@@ -2,7 +2,7 @@
/*
* OMAP54xx PRM instance offset macros
*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
*
* Paul Walmsley (paul@pwsan.com)
* Rajendra Nayak (rnayak@ti.com)
diff --git a/arch/arm/mach-omap2/prm7xx.h b/arch/arm/mach-omap2/prm7xx.h
index cf99307..e5aee04 100644
--- a/arch/arm/mach-omap2/prm7xx.h
+++ b/arch/arm/mach-omap2/prm7xx.h
@@ -2,7 +2,7 @@
/*
* DRA7xx PRM instance offset macros
*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
*
* Generated by code originally written by:
* Paul Walmsley (paul@pwsan.com)
diff --git a/arch/arm/mach-omap2/scrm54xx.h b/arch/arm/mach-omap2/scrm54xx.h
index 810d2b1..cb6f3e6 100644
--- a/arch/arm/mach-omap2/scrm54xx.h
+++ b/arch/arm/mach-omap2/scrm54xx.h
@@ -2,7 +2,7 @@
/*
* OMAP54XX SCRM registers and bitfields
*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
*
* Benoit Cousson (b-cousson@ti.com)
*
diff --git a/arch/arm/mach-omap2/sleep33xx.S b/arch/arm/mach-omap2/sleep33xx.S
index dc22124..ac3d0b3 100644
--- a/arch/arm/mach-omap2/sleep33xx.S
+++ b/arch/arm/mach-omap2/sleep33xx.S
@@ -2,7 +2,7 @@
/*
* Low level suspend code for AM33XX SoCs
*
- * Copyright (C) 2012-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012-2018 Texas Instruments Incorporated - https://www.ti.com/
* Dave Gerlach, Vaibhav Bedia
*/
diff --git a/arch/arm/mach-omap2/sleep43xx.S b/arch/arm/mach-omap2/sleep43xx.S
index 90d2907..832c913 100644
--- a/arch/arm/mach-omap2/sleep43xx.S
+++ b/arch/arm/mach-omap2/sleep43xx.S
@@ -2,7 +2,7 @@
/*
* Low level suspend code for AM43XX SoCs
*
- * Copyright (C) 2013-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2018 Texas Instruments Incorporated - https://www.ti.com/
* Dave Gerlach, Vaibhav Bedia
*/
diff --git a/arch/arm/mach-omap2/ti81xx.h b/arch/arm/mach-omap2/ti81xx.h
index a1e6caf..192b0e7 100644
--- a/arch/arm/mach-omap2/ti81xx.h
+++ b/arch/arm/mach-omap2/ti81xx.h
@@ -1,7 +1,7 @@
/*
* This file contains the address data for various TI81XX modules.
*
- * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments, Inc. - https://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
diff --git a/arch/arm/mach-omap2/voltagedomains54xx_data.c b/arch/arm/mach-omap2/voltagedomains54xx_data.c
index aac274d..e60d76d 100644
--- a/arch/arm/mach-omap2/voltagedomains54xx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains54xx_data.c
@@ -4,7 +4,7 @@
*
* Based on voltagedomains44xx_data.c
*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
*/
#include <linux/kernel.h>
#include <linux/err.h>
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/mach-s3c/Kconfig
similarity index 69%
rename from arch/arm/plat-samsung/Kconfig
rename to arch/arm/mach-s3c/Kconfig
index 301e5726..25606e6 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/mach-s3c/Kconfig
@@ -2,12 +2,16 @@
#
# Copyright 2009 Simtec Electronics
+source "arch/arm/mach-s3c/Kconfig.s3c24xx"
+source "arch/arm/mach-s3c/Kconfig.s3c64xx"
+
config PLAT_SAMSUNG
bool
- depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_EXYNOS || ARCH_S5PV210
+ depends on PLAT_S3C24XX || ARCH_S3C64XX
default y
select GENERIC_IRQ_CHIP
select NO_IOPORT_MAP
+ select SOC_SAMSUNG
help
Base platform code for all Samsung SoC based systems
@@ -154,7 +158,7 @@
bool
default y if ARCH_S3C24XX
help
- Complie in platform device definition for Watchdog Timer
+ Compile in platform device definition for Watchdog Timer
config S3C_DEV_NAND
bool
@@ -169,7 +173,7 @@
config S3C_DEV_RTC
bool
help
- Complie in platform device definition for RTC
+ Compile in platform device definition for RTC
config SAMSUNG_DEV_ADC
bool
@@ -234,54 +238,6 @@
pinctrl-samsung driver.
endif
-comment "Power management"
-
-config SAMSUNG_PM_DEBUG
- bool "Samsung PM Suspend debug"
- depends on PM && DEBUG_KERNEL
- depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
- depends on DEBUG_EXYNOS_UART || DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
- help
- Say Y here if you want verbose debugging from the PM Suspend and
- Resume code. See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
- for more information.
-
-config S3C_PM_DEBUG_LED_SMDK
- bool "SMDK LED suspend/resume debugging"
- depends on PM && (MACH_SMDK6410)
- help
- Say Y here to enable the use of the SMDK LEDs on the baseboard
- for debugging of the state of the suspend and resume process.
-
- Note, this currently only works for S3C64XX based SMDK boards.
-
-config SAMSUNG_PM_CHECK
- bool "S3C2410 PM Suspend Memory CRC"
- depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210)
- select CRC32
- help
- Enable the PM code's memory area checksum over sleep. This option
- will generate CRCs of all blocks of memory, and store them before
- going to sleep. The blocks are then checked on resume for any
- errors.
-
- Note, this can take several seconds depending on memory size
- and CPU speed.
-
- See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
-
-config SAMSUNG_PM_CHECK_CHUNKSIZE
- int "S3C2410 PM Suspend CRC Chunksize (KiB)"
- depends on PM && SAMSUNG_PM_CHECK
- default 64
- help
- Set the chunksize in Kilobytes of the CRC for checking memory
- corruption over suspend and resume. A smaller value will mean that
- the CRC data block will take more memory, but will identify any
- faults with better precision.
-
- See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
-
config SAMSUNG_WAKEMASK
bool
depends on PM
@@ -290,19 +246,5 @@
and above. This code allows a set of interrupt to wakeup-mask
mappings. See <plat/wakeup-mask.h>
-config SAMSUNG_WDT_RESET
- bool
- help
- Compile support for system restart by triggering watchdog reset.
- Used on SoCs that do not provide dedicated reset control.
-
-config DEBUG_S3C_UART
- depends on PLAT_SAMSUNG
- int
- default "0" if DEBUG_S3C_UART0
- default "1" if DEBUG_S3C_UART1
- default "2" if DEBUG_S3C_UART2
- default "3" if DEBUG_S3C_UART3
-
endmenu
endif
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c/Kconfig.s3c24xx
similarity index 96%
rename from arch/arm/mach-s3c24xx/Kconfig
rename to arch/arm/mach-s3c/Kconfig.s3c24xx
index 7673dde..000e3e2 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c/Kconfig.s3c24xx
@@ -123,11 +123,6 @@
This also means that the PLL tables for the selected CPU(s) will
be built which may increase the size of the kernel image.
-config S3C_SETUP_CAMIF
- bool
- help
- Compile in common setup code for S3C CAMIF devices
-
# cpu frequency items common between s3c2410 and s3c2440/s3c2442
config S3C2410_IOTIMING
@@ -137,13 +132,6 @@
Internal node to select io timing code that is common to the s3c2410
and s3c2440/s3c2442 cpu frequency support.
-config S3C2410_CPUFREQ_UTILS
- bool
- depends on ARM_S3C24XX_CPUFREQ
- help
- Internal node to select timing code that is common to the s3c2410
- and s3c2440/s3c244 cpu frequency support.
-
# cpu frequency support common to s3c2412, s3c2413 and s3c2442
config S3C2412_IOTIMING
@@ -468,7 +456,6 @@
select NEW_LEDS
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
- select S3C_SETUP_CAMIF
help
Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
available via various sources. It can come with a 3.5" or 7" touch LCD.
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c/Kconfig.s3c64xx
similarity index 97%
rename from arch/arm/mach-s3c64xx/Kconfig
rename to arch/arm/mach-s3c/Kconfig.s3c64xx
index ac3e356..f3fcb57 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -13,15 +13,15 @@
select GPIO_SAMSUNG if ATAGS
select GPIOLIB
select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_TCM
select PLAT_SAMSUNG
select PM_GENERIC_DOMAINS if PM
select S3C_DEV_NAND if ATAGS
select S3C_GPIO_TRACK if ATAGS
+ select S3C2410_WATCHDOG
select SAMSUNG_ATAGS if ATAGS
select SAMSUNG_WAKEMASK if PM
- select SAMSUNG_WDT_RESET
+ select WATCHDOG
help
Samsung S3C64XX series based systems
@@ -165,7 +165,6 @@
bool "SMDK6410"
depends on ATAGS
select CPU_S3C6410
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_IDE
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/mach-s3c/Makefile
similarity index 62%
rename from arch/arm/plat-samsung/Makefile
rename to arch/arm/mach-s3c/Makefile
index 3db9d2c..54188d1 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/mach-s3c/Makefile
@@ -2,9 +2,16 @@
#
# Copyright 2009 Simtec Electronics
-ccflags-$(CONFIG_ARCH_S3C64XX) := -I$(srctree)/arch/arm/mach-s3c64xx/include
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include
+ifdef CONFIG_ARCH_S3C24XX
+include $(src)/Makefile.s3c24xx
+endif
+
+ifdef CONFIG_ARCH_S3C64XX
+include $(src)/Makefile.s3c64xx
+endif
+
# Objects we always build independent of SoC choice
obj-y += init.o cpu.o
@@ -24,12 +31,7 @@
# PM support
-obj-$(CONFIG_PM_SLEEP) += pm-common.o
-obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm-common.o
-obj-$(CONFIG_SAMSUNG_PM) += pm.o
+obj-$(CONFIG_SAMSUNG_PM) += pm.o pm-common.o
obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o
-obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o
-obj-$(CONFIG_SAMSUNG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
-obj-$(CONFIG_SAMSUNG_WDT_RESET) += watchdog-reset.o
diff --git a/arch/arm/mach-s3c24xx/Makefile.boot b/arch/arm/mach-s3c/Makefile.boot
similarity index 100%
rename from arch/arm/mach-s3c24xx/Makefile.boot
rename to arch/arm/mach-s3c/Makefile.boot
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c/Makefile.s3c24xx
similarity index 80%
rename from arch/arm/mach-s3c24xx/Makefile
rename to arch/arm/mach-s3c/Makefile.s3c24xx
index 6692f2d..3483ab3 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c/Makefile.s3c24xx
@@ -7,7 +7,10 @@
# core
-obj-y += common.o
+obj-y += s3c24xx.o
+obj-y += irq-s3c24xx.o
+obj-$(CONFIG_SPI_S3C24XX_FIQ) += irq-s3c24xx-fiq.o
+obj-$(CONFIG_SPI_S3C24XX_FIQ) += irq-s3c24xx-fiq-exports.o
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o
@@ -30,12 +33,12 @@
# PM
-obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_PM_SLEEP) += irq-pm.o sleep.o
+obj-$(CONFIG_PM) += pm-s3c24xx.o
+obj-$(CONFIG_PM_SLEEP) += irq-pm-s3c24xx.o sleep-s3c24xx.o
# common code
-obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += cpufreq-utils-s3c24xx.o
obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o
obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o
@@ -80,7 +83,7 @@
# common bits of machine support
-obj-$(CONFIG_S3C24XX_SMDK) += common-smdk.o
+obj-$(CONFIG_S3C24XX_SMDK) += common-smdk-s3c24xx.o
obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO) += simtec-audio.o
obj-$(CONFIG_S3C24XX_SIMTEC_NOR) += simtec-nor.o
obj-$(CONFIG_S3C24XX_SIMTEC_PM) += simtec-pm.o
@@ -93,8 +96,7 @@
# device setup
-obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_S3C2443_SETUP_SPI) += setup-spi.o
-obj-$(CONFIG_ARCH_S3C24XX) += setup-i2c.o
-obj-$(CONFIG_S3C24XX_SETUP_TS) += setup-ts.o
-obj-$(CONFIG_S3C_SETUP_CAMIF) += setup-camif.o
+obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio-s3c24xx.o
+obj-$(CONFIG_S3C2443_SETUP_SPI) += setup-spi-s3c24xx.o
+obj-$(CONFIG_ARCH_S3C24XX) += setup-i2c-s3c24xx.o
+obj-$(CONFIG_S3C24XX_SETUP_TS) += setup-ts-s3c24xx.o
diff --git a/arch/arm/mach-s3c/Makefile.s3c64xx b/arch/arm/mach-s3c/Makefile.s3c64xx
new file mode 100644
index 0000000..0c18e31
--- /dev/null
+++ b/arch/arm/mach-s3c/Makefile.s3c64xx
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+
+# PM
+
+obj-$(CONFIG_PM) += pm-s3c64xx.o
+obj-$(CONFIG_PM_SLEEP) += sleep-s3c64xx.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle-s3c64xx.o
+
+ifdef CONFIG_SAMSUNG_ATAGS
+
+obj-$(CONFIG_PM_SLEEP) += irq-pm-s3c64xx.o
+
+# Core
+
+obj-y += s3c64xx.o
+obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
+obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
+
+# DMA support
+
+obj-$(CONFIG_S3C64XX_PL080) += pl080.o
+
+# Device support
+
+obj-y += dev-uart-s3c64xx.o
+obj-y += dev-audio-s3c64xx.o
+
+# Device setup
+
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy-s3c64xx.o
+
+obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight-s3c64xx.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
+obj-$(CONFIG_MACH_HMT) += mach-hmt.o
+obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o
+obj-$(CONFIG_MACH_NCP) += mach-ncp.o
+obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
+obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
+obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
+obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
+obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
+obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
+endif
+
+obj-$(CONFIG_MACH_S3C64XX_DT) += mach-s3c64xx-dt.o
diff --git a/arch/arm/plat-samsung/include/plat/adc-core.h b/arch/arm/mach-s3c/adc-core.h
similarity index 100%
rename from arch/arm/plat-samsung/include/plat/adc-core.h
rename to arch/arm/mach-s3c/adc-core.h
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/mach-s3c/adc.c
similarity index 99%
rename from arch/arm/plat-samsung/adc.c
rename to arch/arm/mach-s3c/adc.c
index 55b1925..0232520 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/mach-s3c/adc.c
@@ -19,8 +19,8 @@
#include <linux/io.h>
#include <linux/regulator/consumer.h>
-#include <plat/regs-adc.h>
-#include <plat/adc.h>
+#include "regs-adc.h"
+#include <linux/soc/samsung/s3c-adc.h>
/* This driver is designed to control the usage of the ADC block between
* the touchscreen and any other drivers that may need to use it, such as
diff --git a/arch/arm/mach-s3c24xx/anubis.h b/arch/arm/mach-s3c/anubis.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/anubis.h
rename to arch/arm/mach-s3c/anubis.h
diff --git a/arch/arm/mach-s3c64xx/ata-core.h b/arch/arm/mach-s3c/ata-core-s3c64xx.h
similarity index 77%
rename from arch/arm/mach-s3c64xx/ata-core.h
rename to arch/arm/mach-s3c/ata-core-s3c64xx.h
index 6d9a81f..4863ad9 100644
--- a/arch/arm/mach-s3c64xx/ata-core.h
+++ b/arch/arm/mach-s3c/ata-core-s3c64xx.h
@@ -6,8 +6,8 @@
* Samsung CF-ATA Controller core functions
*/
-#ifndef __ASM_PLAT_ATA_CORE_H
-#define __ASM_PLAT_ATA_CORE_H __FILE__
+#ifndef __ASM_PLAT_ATA_CORE_S3C64XX_H
+#define __ASM_PLAT_ATA_CORE_S3C64XX_H __FILE__
/* These functions are only for use with the core support code, such as
* the cpu specific initialisation code
@@ -21,4 +21,4 @@ static inline void s3c_cfcon_setname(char *name)
#endif
}
-#endif /* __ASM_PLAT_ATA_CORE_H */
+#endif /* __ASM_PLAT_ATA_CORE_S3C64XX_H */
diff --git a/arch/arm/mach-s3c64xx/backlight.h b/arch/arm/mach-s3c/backlight-s3c64xx.h
similarity index 77%
rename from arch/arm/mach-s3c64xx/backlight.h
rename to arch/arm/mach-s3c/backlight-s3c64xx.h
index 028663f..2a2b358 100644
--- a/arch/arm/mach-s3c64xx/backlight.h
+++ b/arch/arm/mach-s3c/backlight-s3c64xx.h
@@ -4,8 +4,8 @@
* http://www.samsung.com
*/
-#ifndef __ASM_PLAT_BACKLIGHT_H
-#define __ASM_PLAT_BACKLIGHT_H __FILE__
+#ifndef __ASM_PLAT_BACKLIGHT_S3C64XX_H
+#define __ASM_PLAT_BACKLIGHT_S3C64XX_H __FILE__
/* samsung_bl_gpio_info - GPIO info for PWM Backlight control
* @no: GPIO number for PWM timer out
@@ -19,4 +19,4 @@ struct samsung_bl_gpio_info {
extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
struct platform_pwm_backlight_data *bl_data);
-#endif /* __ASM_PLAT_BACKLIGHT_H */
+#endif /* __ASM_PLAT_BACKLIGHT_S3C64XX_H */
diff --git a/arch/arm/mach-s3c24xx/bast-ide.c b/arch/arm/mach-s3c/bast-ide.c
similarity index 97%
rename from arch/arm/mach-s3c24xx/bast-ide.c
rename to arch/arm/mach-s3c/bast-ide.c
index 0679443..da64db1 100644
--- a/arch/arm/mach-s3c24xx/bast-ide.c
+++ b/arch/arm/mach-s3c/bast-ide.c
@@ -19,7 +19,8 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/map.h>
+#include "map.h"
+#include <mach/irqs.h>
#include "bast.h"
diff --git a/arch/arm/mach-s3c24xx/bast-irq.c b/arch/arm/mach-s3c/bast-irq.c
similarity index 94%
rename from arch/arm/mach-s3c24xx/bast-irq.c
rename to arch/arm/mach-s3c/bast-irq.c
index 0372805..d299f12 100644
--- a/arch/arm/mach-s3c24xx/bast-irq.c
+++ b/arch/arm/mach-s3c/bast-irq.c
@@ -15,8 +15,8 @@
#include <asm/mach-types.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
+#include "regs-irq.h"
+#include <mach/irqs.h>
#include "bast.h"
@@ -62,7 +62,7 @@ bast_pc104_mask(struct irq_data *data)
static void
bast_pc104_maskack(struct irq_data *data)
{
- struct irq_desc *desc = irq_desc + BAST_IRQ_ISA;
+ struct irq_desc *desc = irq_to_desc(BAST_IRQ_ISA);
bast_pc104_mask(data);
desc->irq_data.chip->irq_ack(&desc->irq_data);
@@ -94,8 +94,6 @@ static void bast_irq_pc104_demux(struct irq_desc *desc)
if (unlikely(stat == 0)) {
/* ack if we get an irq with nothing (ie, startup) */
-
- desc = irq_desc + BAST_IRQ_ISA;
desc->irq_data.chip->irq_ack(&desc->irq_data);
} else {
/* handle the IRQ */
diff --git a/arch/arm/mach-s3c24xx/bast.h b/arch/arm/mach-s3c/bast.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/bast.h
rename to arch/arm/mach-s3c/bast.h
diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c/common-smdk-s3c24xx.c
similarity index 95%
rename from arch/arm/mach-s3c24xx/common-smdk.c
rename to arch/arm/mach-s3c/common-smdk-s3c24xx.c
index 121646a..f860d8b 100644
--- a/arch/arm/mach-s3c24xx/common-smdk.c
+++ b/arch/arm/mach-s3c/common-smdk-s3c24xx.c
@@ -29,19 +29,18 @@
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/leds-s3c24xx.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "pm.h"
-#include "common-smdk.h"
+#include "common-smdk-s3c24xx.h"
/* LED devices */
diff --git a/arch/arm/mach-s3c24xx/common-smdk.h b/arch/arm/mach-s3c/common-smdk-s3c24xx.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/common-smdk.h
rename to arch/arm/mach-s3c/common-smdk-s3c24xx.h
diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/mach-s3c/cpu.c
similarity index 62%
rename from arch/arm/plat-samsung/cpu.c
rename to arch/arm/mach-s3c/cpu.c
index e1ba88b..6e97725 100644
--- a/arch/arm/plat-samsung/cpu.c
+++ b/arch/arm/mach-s3c/cpu.c
@@ -10,17 +10,10 @@
#include <linux/init.h>
#include <linux/io.h>
-#include <plat/map-base.h>
-#include <plat/cpu.h>
+#include <mach/map-base.h>
+#include "cpu.h"
unsigned long samsung_cpu_id;
-static unsigned int samsung_cpu_rev;
-
-unsigned int samsung_rev(void)
-{
- return samsung_cpu_rev;
-}
-EXPORT_SYMBOL(samsung_rev);
void __init s3c64xx_init_cpu(void)
{
@@ -34,15 +27,5 @@ void __init s3c64xx_init_cpu(void)
samsung_cpu_id = readl_relaxed(S3C_VA_SYS + 0xA1C);
}
- samsung_cpu_rev = 0;
-
- pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id);
-}
-
-void __init s5p_init_cpu(const void __iomem *cpuid_addr)
-{
- samsung_cpu_id = readl_relaxed(cpuid_addr);
- samsung_cpu_rev = samsung_cpu_id & 0xFF;
-
pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id);
}
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/mach-s3c/cpu.h
similarity index 89%
rename from arch/arm/plat-samsung/include/plat/cpu.h
rename to arch/arm/mach-s3c/cpu.h
index fadcddb..20ff98d 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/mach-s3c/cpu.h
@@ -109,9 +109,6 @@ extern void s3c_init_cpu(unsigned long idcode,
extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
extern void s3c64xx_init_cpu(void);
-extern void s5p_init_cpu(const void __iomem *cpuid_addr);
-
-extern unsigned int samsung_rev(void);
extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
@@ -126,15 +123,6 @@ extern struct syscore_ops s3c2412_pm_syscore_ops;
extern struct syscore_ops s3c2416_pm_syscore_ops;
extern struct syscore_ops s3c244x_pm_syscore_ops;
-/* system device subsystems */
-
-extern struct bus_type s3c2410_subsys;
-extern struct bus_type s3c2410a_subsys;
-extern struct bus_type s3c2412_subsys;
-extern struct bus_type s3c2416_subsys;
-extern struct bus_type s3c2440_subsys;
-extern struct bus_type s3c2442_subsys;
-extern struct bus_type s3c2443_subsys;
extern struct bus_type s3c6410_subsys;
#endif
diff --git a/arch/arm/mach-s3c24xx/cpufreq-utils.c b/arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c
similarity index 68%
rename from arch/arm/mach-s3c24xx/cpufreq-utils.c
rename to arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c
index 1a7f38d..c1784d8 100644
--- a/arch/arm/mach-s3c24xx/cpufreq-utils.c
+++ b/arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c
@@ -12,12 +12,12 @@
#include <linux/io.h>
#include <linux/clk.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
+#include "map.h"
+#include "regs-clock.h"
-#include <plat/cpu-freq-core.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
-#include "regs-mem.h"
+#include "regs-mem-s3c24xx.h"
/**
* s3c2410_cpufreq_setrefresh - set SDRAM refresh value
@@ -60,3 +60,35 @@ void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
if (!IS_ERR(cfg->mpll))
clk_set_rate(cfg->mpll, cfg->pll.frequency);
}
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+u32 s3c2440_read_camdivn(void)
+{
+ return __raw_readl(S3C2440_CAMDIVN);
+}
+
+void s3c2440_write_camdivn(u32 camdiv)
+{
+ __raw_writel(camdiv, S3C2440_CAMDIVN);
+}
+#endif
+
+u32 s3c24xx_read_clkdivn(void)
+{
+ return __raw_readl(S3C2410_CLKDIVN);
+}
+
+void s3c24xx_write_clkdivn(u32 clkdiv)
+{
+ __raw_writel(clkdiv, S3C2410_CLKDIVN);
+}
+
+u32 s3c24xx_read_mpllcon(void)
+{
+ return __raw_readl(S3C2410_MPLLCON);
+}
+
+void s3c24xx_write_locktime(u32 locktime)
+{
+ return __raw_writel(locktime, S3C2410_LOCKTIME);
+}
diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c/cpuidle-s3c64xx.c
similarity index 91%
rename from arch/arm/mach-s3c64xx/cpuidle.c
rename to arch/arm/mach-s3c/cpuidle-s3c64xx.c
index 0bac6f6..b1c5f43 100644
--- a/arch/arm/mach-s3c64xx/cpuidle.c
+++ b/arch/arm/mach-s3c/cpuidle-s3c64xx.c
@@ -13,11 +13,11 @@
#include <asm/cpuidle.h>
-#include <plat/cpu.h>
-#include <mach/map.h>
+#include "cpu.h"
+#include "map.h"
-#include "regs-sys.h"
-#include "regs-syscon-power.h"
+#include "regs-sys-s3c64xx.h"
+#include "regs-syscon-power-s3c64xx.h"
static int s3c64xx_enter_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
diff --git a/arch/arm/mach-s3c64xx/crag6410.h b/arch/arm/mach-s3c/crag6410.h
similarity index 94%
rename from arch/arm/mach-s3c64xx/crag6410.h
rename to arch/arm/mach-s3c/crag6410.h
index 00d9aa1..f39ea2c 100644
--- a/arch/arm/mach-s3c64xx/crag6410.h
+++ b/arch/arm/mach-s3c/crag6410.h
@@ -8,7 +8,7 @@
#ifndef MACH_CRAG6410_H
#define MACH_CRAG6410_H
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
#define GLENFARCLAS_PMIC_IRQ_BASE IRQ_BOARD_START
#define BANFF_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c/dev-audio-s3c64xx.c
similarity index 96%
rename from arch/arm/mach-s3c64xx/dev-audio.c
rename to arch/arm/mach-s3c/dev-audio-s3c64xx.c
index e3c49b5..fc2f077 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c/dev-audio-s3c64xx.c
@@ -11,13 +11,12 @@
#include <linux/export.h>
#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/dma.h>
+#include "map.h"
-#include <plat/devs.h>
+#include "devs.h"
#include <linux/platform_data/asoc-s3c.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
{
diff --git a/arch/arm/mach-s3c64xx/dev-backlight.c b/arch/arm/mach-s3c/dev-backlight-s3c64xx.c
similarity index 97%
rename from arch/arm/mach-s3c64xx/dev-backlight.c
rename to arch/arm/mach-s3c/dev-backlight-s3c64xx.c
index 09e6da30..65488b6 100644
--- a/arch/arm/mach-s3c64xx/dev-backlight.c
+++ b/arch/arm/mach-s3c/dev-backlight-s3c64xx.c
@@ -11,10 +11,10 @@
#include <linux/io.h>
#include <linux/pwm_backlight.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
+#include "devs.h"
+#include "gpio-cfg.h"
-#include "backlight.h"
+#include "backlight-s3c64xx.h"
struct samsung_bl_drvdata {
struct platform_pwm_backlight_data plat_data;
diff --git a/arch/arm/mach-s3c64xx/dev-uart.c b/arch/arm/mach-s3c/dev-uart-s3c64xx.c
similarity index 94%
rename from arch/arm/mach-s3c64xx/dev-uart.c
rename to arch/arm/mach-s3c/dev-uart-s3c64xx.c
index 5fb59ad..8288e8d 100644
--- a/arch/arm/mach-s3c64xx/dev-uart.c
+++ b/arch/arm/mach-s3c/dev-uart-s3c64xx.c
@@ -15,11 +15,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
+#include "map.h"
#include <mach/irqs.h>
-#include <plat/devs.h>
+#include "devs.h"
/* Serial port registrations */
diff --git a/arch/arm/plat-samsung/dev-uart.c b/arch/arm/mach-s3c/dev-uart.c
similarity index 96%
rename from arch/arm/plat-samsung/dev-uart.c
rename to arch/arm/mach-s3c/dev-uart.c
index 7476a5d..3d1f7f2 100644
--- a/arch/arm/plat-samsung/dev-uart.c
+++ b/arch/arm/mach-s3c/dev-uart.c
@@ -10,7 +10,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <plat/devs.h>
+#include "devs.h"
/* uart devices */
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/mach-s3c/devs.c
similarity index 95%
rename from arch/arm/plat-samsung/devs.c
rename to arch/arm/mach-s3c/devs.c
index 089a176..06dec64 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/mach-s3c/devs.c
@@ -5,6 +5,7 @@
//
// Base Samsung platform device definitions
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
@@ -37,28 +38,32 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/dma.h>
#include <mach/irqs.h>
-#include <mach/map.h>
+#include "map.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/adc.h>
+#ifdef CONFIG_PLAT_S3C24XX
+#include "regs-s3c2443-clock.h"
+#endif /* CONFIG_PLAT_S3C24XX */
+
+#include "cpu.h"
+#include "devs.h"
+#include <linux/soc/samsung/s3c-adc.h>
#include <linux/platform_data/ata-samsung_cf.h>
-#include <plat/fb.h>
-#include <plat/fb-s3c2410.h>
+#include "fb.h"
+#include <linux/platform_data/fb-s3c2410.h>
#include <linux/platform_data/hwmon-s3c.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/keypad.h>
+#include "keypad.h"
#include <linux/platform_data/mmc-s3cmci.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/pwm-core.h>
-#include <plat/sdhci.h>
+#include "pwm-core.h"
+#include "sdhci.h"
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include <plat/usb-phy.h>
-#include <plat/regs-spi.h>
+#include "usb-phy.h"
#include <linux/platform_data/asoc-s3c.h>
#include <linux/platform_data/spi-s3c64xx.h>
@@ -833,16 +838,42 @@ struct platform_device s3c_device_rtc = {
/* SDI */
#ifdef CONFIG_PLAT_S3C24XX
+void s3c24xx_mci_def_set_power(unsigned char power_mode, unsigned short vdd)
+{
+ switch (power_mode) {
+ case MMC_POWER_ON:
+ case MMC_POWER_UP:
+ /* Configure GPE5...GPE10 pins in SD mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+ break;
+
+ case MMC_POWER_OFF:
+ default:
+ gpio_direction_output(S3C2410_GPE(5), 0);
+ break;
+ }
+}
+
static struct resource s3c_sdi_resource[] = {
[0] = DEFINE_RES_MEM(S3C24XX_PA_SDI, S3C24XX_SZ_SDI),
[1] = DEFINE_RES_IRQ(IRQ_SDI),
};
+static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
+ /* This is currently here to avoid a number of if (host->pdata)
+ * checks. Any zero fields to ensure reasonable defaults are picked. */
+ .no_wprotect = 1,
+ .no_detect = 1,
+ .set_power = s3c24xx_mci_def_set_power,
+};
+
struct platform_device s3c_device_sdi = {
.name = "s3c2410-sdi",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_sdi_resource),
.resource = s3c_sdi_resource,
+ .dev.platform_data = &s3cmci_def_pdata,
};
void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
@@ -1038,6 +1069,8 @@ struct platform_device s3c_device_usb_hsudc = {
void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
{
s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
+ pd->phy_init = s3c_hsudc_init_phy;
+ pd->phy_uninit = s3c_hsudc_uninit_phy;
}
#endif /* CONFIG_PLAT_S3C24XX */
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/mach-s3c/devs.h
similarity index 100%
rename from arch/arm/plat-samsung/include/plat/devs.h
rename to arch/arm/mach-s3c/devs.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c/dma-s3c24xx.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/include/mach/dma.h
rename to arch/arm/mach-s3c/dma-s3c24xx.h
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c/dma-s3c64xx.h
similarity index 100%
rename from arch/arm/mach-s3c64xx/include/mach/dma.h
rename to arch/arm/mach-s3c/dma-s3c64xx.h
diff --git a/arch/arm/mach-s3c/dma.h b/arch/arm/mach-s3c/dma.h
new file mode 100644
index 0000000..59a4578
--- /dev/null
+++ b/arch/arm/mach-s3c/dma.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "dma-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "dma-s3c64xx.h"
+#endif
diff --git a/arch/arm/mach-s3c24xx/fb-core.h b/arch/arm/mach-s3c/fb-core-s3c24xx.h
similarity index 78%
rename from arch/arm/mach-s3c24xx/fb-core.h
rename to arch/arm/mach-s3c/fb-core-s3c24xx.h
index 1821e82..0e07f3b 100644
--- a/arch/arm/mach-s3c24xx/fb-core.h
+++ b/arch/arm/mach-s3c/fb-core-s3c24xx.h
@@ -5,8 +5,8 @@
*
* Samsung framebuffer driver core functions
*/
-#ifndef __ASM_PLAT_FB_CORE_H
-#define __ASM_PLAT_FB_CORE_H __FILE__
+#ifndef __ASM_PLAT_FB_CORE_S3C24XX_H
+#define __ASM_PLAT_FB_CORE_S3C24XX_H __FILE__
/*
* These functions are only for use with the core support code, such as
@@ -21,4 +21,4 @@ static inline void s3c_fb_setname(char *name)
#endif
}
-#endif /* __ASM_PLAT_FB_CORE_H */
+#endif /* __ASM_PLAT_FB_CORE_S3C24XX_H */
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/mach-s3c/fb.h
similarity index 100%
rename from arch/arm/plat-samsung/include/plat/fb.h
rename to arch/arm/mach-s3c/fb.h
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/mach-s3c/gpio-cfg-helpers.h
similarity index 100%
rename from arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
rename to arch/arm/mach-s3c/gpio-cfg-helpers.h
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/mach-s3c/gpio-cfg.h
similarity index 100%
rename from arch/arm/plat-samsung/include/plat/gpio-cfg.h
rename to arch/arm/mach-s3c/gpio-cfg.h
diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/mach-s3c/gpio-core.h
similarity index 98%
rename from arch/arm/plat-samsung/include/plat/gpio-core.h
rename to arch/arm/mach-s3c/gpio-core.h
index c0bfceb..b361c8c 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-core.h
+++ b/arch/arm/mach-s3c/gpio-core.h
@@ -11,7 +11,7 @@
#define __PLAT_SAMSUNG_GPIO_CORE_H
/* Bring in machine-local definitions, especially S3C_GPIO_END */
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
#include <linux/gpio/driver.h>
#define GPIOCON_OFF (0x00)
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-samsung.h b/arch/arm/mach-s3c/gpio-samsung-s3c24xx.h
similarity index 98%
rename from arch/arm/mach-s3c24xx/include/mach/gpio-samsung.h
rename to arch/arm/mach-s3c/gpio-samsung-s3c24xx.h
index 2ad22b2..c29fdc9 100644
--- a/arch/arm/mach-s3c24xx/include/mach/gpio-samsung.h
+++ b/arch/arm/mach-s3c/gpio-samsung-s3c24xx.h
@@ -14,6 +14,8 @@
#ifndef GPIO_SAMSUNG_S3C24XX_H
#define GPIO_SAMSUNG_S3C24XX_H
+#include "map.h"
+
/*
* GPIO sizes for various SoCs:
*
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h b/arch/arm/mach-s3c/gpio-samsung-s3c64xx.h
similarity index 100%
rename from arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
rename to arch/arm/mach-s3c/gpio-samsung-s3c64xx.h
diff --git a/arch/arm/plat-samsung/gpio-samsung.c b/arch/arm/mach-s3c/gpio-samsung.c
similarity index 98%
rename from arch/arm/plat-samsung/gpio-samsung.c
rename to arch/arm/mach-s3c/gpio-samsung.c
index 8955fd6..76ef415 100644
--- a/arch/arm/plat-samsung/gpio-samsung.c
+++ b/arch/arm/mach-s3c/gpio-samsung.c
@@ -27,15 +27,15 @@
#include <asm/irq.h>
#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include <plat/cpu.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/pm.h>
+#include "cpu.h"
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+#include "pm.h"
int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
unsigned int off, samsung_gpio_pull_t pull)
diff --git a/arch/arm/mach-s3c/gpio-samsung.h b/arch/arm/mach-s3c/gpio-samsung.h
new file mode 100644
index 0000000..02f6f4a
--- /dev/null
+++ b/arch/arm/mach-s3c/gpio-samsung.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "gpio-samsung-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "gpio-samsung-s3c64xx.h"
+#endif
diff --git a/arch/arm/mach-s3c24xx/gta02.h b/arch/arm/mach-s3c/gta02.h
similarity index 94%
rename from arch/arm/mach-s3c24xx/gta02.h
rename to arch/arm/mach-s3c/gta02.h
index d5610ba..043ae38 100644
--- a/arch/arm/mach-s3c24xx/gta02.h
+++ b/arch/arm/mach-s3c/gta02.h
@@ -6,7 +6,7 @@
#ifndef __MACH_S3C24XX_GTA02_H
#define __MACH_S3C24XX_GTA02_H __FILE__
-#include <mach/regs-gpio.h>
+#include "regs-gpio.h"
#define GTA02_GPIO_AUX_LED S3C2410_GPB(2)
#define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9)
diff --git a/arch/arm/mach-s3c24xx/h1940-bluetooth.c b/arch/arm/mach-s3c/h1940-bluetooth.c
similarity index 96%
rename from arch/arm/mach-s3c24xx/h1940-bluetooth.c
rename to arch/arm/mach-s3c/h1940-bluetooth.c
index 186b532..59edcf8 100644
--- a/arch/arm/mach-s3c24xx/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c/h1940-bluetooth.c
@@ -13,10 +13,9 @@
#include <linux/gpio.h>
#include <linux/rfkill.h>
-#include <plat/gpio-cfg.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include "h1940.h"
diff --git a/arch/arm/mach-s3c24xx/h1940.h b/arch/arm/mach-s3c/h1940.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/h1940.h
rename to arch/arm/mach-s3c/h1940.h
diff --git a/arch/arm/mach-s3c/hardware-s3c24xx.h b/arch/arm/mach-s3c/hardware-s3c24xx.h
new file mode 100644
index 0000000..33b3746
--- /dev/null
+++ b/arch/arm/mach-s3c/hardware-s3c24xx.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_S3C24XX_H
+#define __ASM_ARCH_HARDWARE_S3C24XX_H
+
+extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
+
+#endif /* __ASM_ARCH_HARDWARE_S3C24XX_H */
diff --git a/arch/arm/plat-samsung/include/plat/iic-core.h b/arch/arm/mach-s3c/iic-core.h
similarity index 100%
rename from arch/arm/plat-samsung/include/plat/iic-core.h
rename to arch/arm/mach-s3c/iic-core.h
diff --git a/arch/arm/mach-s3c/include/mach/io-s3c24xx.h b/arch/arm/mach-s3c/include/mach/io-s3c24xx.h
new file mode 100644
index 0000000..738b775
--- /dev/null
+++ b/arch/arm/mach-s3c/include/mach/io-s3c24xx.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-s3c2410/include/mach/io.h
+ * from arch/arm/mach-rpc/include/mach/io.h
+ *
+ * Copyright (C) 1997 Russell King
+ * (C) 2003 Simtec Electronics
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_S3C24XX_H
+#define __ASM_ARM_ARCH_IO_S3C24XX_H
+
+#include <mach/map-base.h>
+
+/*
+ * ISA style IO, for each machine to sort out mappings for,
+ * if it implements it. We reserve two 16M regions for ISA,
+ * so the PC/104 can use separate addresses for 8-bit and
+ * 16-bit port I/O.
+ */
+#define PCIO_BASE S3C_ADDR(0x02000000)
+#define IO_SPACE_LIMIT 0x00ffffff
+#define S3C24XX_VA_ISA_WORD (PCIO_BASE)
+#define S3C24XX_VA_ISA_BYTE (PCIO_BASE + 0x01000000)
+
+#ifdef CONFIG_ISA
+
+#define inb(p) readb(S3C24XX_VA_ISA_BYTE + (p))
+#define inw(p) readw(S3C24XX_VA_ISA_WORD + (p))
+#define inl(p) readl(S3C24XX_VA_ISA_WORD + (p))
+
+#define outb(v,p) writeb((v), S3C24XX_VA_ISA_BYTE + (p))
+#define outw(v,p) writew((v), S3C24XX_VA_ISA_WORD + (p))
+#define outl(v,p) writel((v), S3C24XX_VA_ISA_WORD + (p))
+
+#define insb(p,d,l) readsb(S3C24XX_VA_ISA_BYTE + (p),d,l)
+#define insw(p,d,l) readsw(S3C24XX_VA_ISA_WORD + (p),d,l)
+#define insl(p,d,l) readsl(S3C24XX_VA_ISA_WORD + (p),d,l)
+
+#define outsb(p,d,l) writesb(S3C24XX_VA_ISA_BYTE + (p),d,l)
+#define outsw(p,d,l) writesw(S3C24XX_VA_ISA_WORD + (p),d,l)
+#define outsl(p,d,l) writesl(S3C24XX_VA_ISA_WORD + (p),d,l)
+
+#else
+
+#define __io(x) (PCIO_BASE + (x))
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-s3c/include/mach/io.h b/arch/arm/mach-s3c/include/mach/io.h
new file mode 100644
index 0000000..30a0135
--- /dev/null
+++ b/arch/arm/mach-s3c/include/mach/io.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "io-s3c24xx.h"
+#endif
diff --git a/arch/arm/mach-s3c24xx/include/mach/irqs.h b/arch/arm/mach-s3c/include/mach/irqs-s3c24xx.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/include/mach/irqs.h
rename to arch/arm/mach-s3c/include/mach/irqs-s3c24xx.h
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c/include/mach/irqs-s3c64xx.h
similarity index 100%
rename from arch/arm/mach-s3c64xx/include/mach/irqs.h
rename to arch/arm/mach-s3c/include/mach/irqs-s3c64xx.h
diff --git a/arch/arm/mach-s3c/include/mach/irqs.h b/arch/arm/mach-s3c/include/mach/irqs.h
new file mode 100644
index 0000000..0bff1c1
--- /dev/null
+++ b/arch/arm/mach-s3c/include/mach/irqs.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "irqs-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "irqs-s3c64xx.h"
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/map-base.h b/arch/arm/mach-s3c/include/mach/map-base.h
similarity index 100%
rename from arch/arm/plat-samsung/include/plat/map-base.h
rename to arch/arm/mach-s3c/include/mach/map-base.h
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/mach-s3c/init.c
similarity index 98%
rename from arch/arm/plat-samsung/init.c
rename to arch/arm/mach-s3c/init.c
index e9acf02e..9d92f03 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/mach-s3c/init.c
@@ -23,8 +23,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
+#include "cpu.h"
+#include "devs.h"
static struct cpu_table *cpu;
diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c b/arch/arm/mach-s3c/iotiming-s3c2410.c
similarity index 97%
rename from arch/arm/mach-s3c24xx/iotiming-s3c2410.c
rename to arch/arm/mach-s3c/iotiming-s3c2410.c
index 9f90aaf..28d9f47 100644
--- a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c
+++ b/arch/arm/mach-s3c/iotiming-s3c2410.c
@@ -14,12 +14,12 @@
#include <linux/io.h>
#include <linux/slab.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
+#include "map.h"
+#include "regs-clock.h"
-#include <plat/cpu-freq-core.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
-#include "regs-mem.h"
+#include "regs-mem-s3c24xx.h"
#define print_ns(x) ((x) / 10), ((x) % 10)
@@ -129,7 +129,7 @@ static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
return 0;
}
-int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
+static int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
{
/* Currently no support for Tacp calculations. */
return 0;
@@ -288,8 +288,8 @@ static unsigned int get_0124(unsigned long hclk_tns,
* Given the BANKCON setting in @bt and the current frequency settings
* in @cfg, update the cycle timing information.
*/
-void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
- struct s3c2410_iobank_timing *bt)
+static void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+ struct s3c2410_iobank_timing *bt)
{
unsigned long bankcon = bt->bankcon;
unsigned long hclk = cfg->freq.hclk_tns;
diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c b/arch/arm/mach-s3c/iotiming-s3c2412.c
similarity index 98%
rename from arch/arm/mach-s3c24xx/iotiming-s3c2412.c
rename to arch/arm/mach-s3c/iotiming-s3c2412.c
index 59356d1..003f89c 100644
--- a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
+++ b/arch/arm/mach-s3c/iotiming-s3c2412.c
@@ -23,10 +23,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
+#include "cpu.h"
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
-#include <mach/s3c2412.h>
+#include "s3c2412.h"
#define print_ns(x) ((x) / 10), ((x) % 10)
diff --git a/arch/arm/mach-s3c24xx/irq-pm.c b/arch/arm/mach-s3c/irq-pm-s3c24xx.c
similarity index 92%
rename from arch/arm/mach-s3c24xx/irq-pm.c
rename to arch/arm/mach-s3c/irq-pm-s3c24xx.c
index e0131b1..4d5e283 100644
--- a/arch/arm/mach-s3c24xx/irq-pm.c
+++ b/arch/arm/mach-s3c/irq-pm-s3c24xx.c
@@ -13,14 +13,14 @@
#include <linux/syscore_ops.h>
#include <linux/io.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/map-base.h>
-#include <plat/map-s3c.h>
+#include "cpu.h"
+#include "pm.h"
+#include <mach/map-base.h>
+#include "map-s3c.h"
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-#include <mach/pm-core.h>
+#include "regs-irq.h"
+#include "regs-gpio.h"
+#include "pm-core.h"
#include <asm/irq.h>
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c/irq-pm-s3c64xx.c
similarity index 96%
rename from arch/arm/mach-s3c64xx/irq-pm.c
rename to arch/arm/mach-s3c/irq-pm-s3c64xx.c
index 31b2211..4a1e935 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c/irq-pm-s3c64xx.c
@@ -20,11 +20,11 @@
#include <linux/io.h>
#include <linux/of.h>
-#include <mach/map.h>
+#include "map.h"
-#include <mach/regs-gpio.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "regs-gpio.h"
+#include "cpu.h"
+#include "pm.h"
/* We handled all the IRQ types in this code, to save having to make several
* small files to handle each different type separately. Having the EINT_GRP
diff --git a/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c b/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c
new file mode 100644
index 0000000..84cf863
--- /dev/null
+++ b/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/stddef.h>
+#include <linux/export.h>
+#include <linux/spi/s3c24xx-fiq.h>
+
+EXPORT_SYMBOL(s3c24xx_spi_fiq_rx);
+EXPORT_SYMBOL(s3c24xx_spi_fiq_txrx);
+EXPORT_SYMBOL(s3c24xx_spi_fiq_tx);
diff --git a/drivers/spi/spi-s3c24xx-fiq.S b/arch/arm/mach-s3c/irq-s3c24xx-fiq.S
similarity index 94%
rename from drivers/spi/spi-s3c24xx-fiq.S
rename to arch/arm/mach-s3c/irq-s3c24xx-fiq.S
index e95d628..b54cbd0 100644
--- a/drivers/spi/spi-s3c24xx-fiq.S
+++ b/arch/arm/mach-s3c/irq-s3c24xx-fiq.S
@@ -10,11 +10,13 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <mach/map.h>
-#include <mach/regs-irq.h>
-#include <plat/regs-spi.h>
+#include "map.h"
+#include "regs-irq.h"
-#include "spi-s3c24xx-fiq.h"
+#include <linux/spi/s3c24xx-fiq.h>
+
+#define S3C2410_SPTDAT (0x10)
+#define S3C2410_SPRDAT (0x14)
.text
diff --git a/drivers/irqchip/irq-s3c24xx.c b/arch/arm/mach-s3c/irq-s3c24xx.c
similarity index 98%
rename from drivers/irqchip/irq-s3c24xx.c
rename to arch/arm/mach-s3c/irq-s3c24xx.c
index d2031fe..79b5f19 100644
--- a/drivers/irqchip/irq-s3c24xx.c
+++ b/arch/arm/mach-s3c/irq-s3c24xx.c
@@ -25,12 +25,13 @@
#include <asm/exception.h>
#include <asm/mach/irq.h>
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
+#include <mach/irqs.h>
+#include "regs-irq.h"
+#include "regs-gpio.h"
-#include <plat/cpu.h>
-#include <plat/regs-irqtype.h>
-#include <plat/pm.h>
+#include "cpu.h"
+#include "regs-irqtype.h"
+#include "pm.h"
#define S3C_IRQTYPE_NONE 0
#define S3C_IRQTYPE_EINT 1
@@ -375,14 +376,17 @@ asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs)
/**
* s3c24xx_set_fiq - set the FIQ routing
* @irq: IRQ number to route to FIQ on processor.
+ * @ack_ptr: pointer to a location for storing the bit mask
* @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
*
* Change the state of the IRQ to FIQ routing depending on @irq and @on. If
* @on is true, the @irq is checked to see if it can be routed and the
* interrupt controller updated to route the IRQ. If @on is false, the FIQ
* routing is cleared, regardless of which @irq is specified.
+ *
+ * returns the mask value for the register.
*/
-int s3c24xx_set_fiq(unsigned int irq, bool on)
+int s3c24xx_set_fiq(unsigned int irq, u32 *ack_ptr, bool on)
{
u32 intmod;
unsigned offs;
@@ -390,15 +394,18 @@ int s3c24xx_set_fiq(unsigned int irq, bool on)
if (on) {
offs = irq - FIQ_START;
if (offs > 31)
- return -EINVAL;
+ return 0;
intmod = 1 << offs;
} else {
intmod = 0;
}
+ if (ack_ptr)
+ *ack_ptr = intmod;
writel_relaxed(intmod, S3C2410_INTMOD);
- return 0;
+
+ return intmod;
}
EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
diff --git a/arch/arm/mach-s3c64xx/irq-uart.h b/arch/arm/mach-s3c/irq-uart-s3c64xx.h
similarity index 100%
rename from arch/arm/mach-s3c64xx/irq-uart.h
rename to arch/arm/mach-s3c/irq-uart-s3c64xx.h
diff --git a/arch/arm/plat-samsung/include/plat/keypad.h b/arch/arm/mach-s3c/keypad.h
similarity index 100%
rename from arch/arm/plat-samsung/include/plat/keypad.h
rename to arch/arm/mach-s3c/keypad.h
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c/mach-amlm5900.c
similarity index 83%
rename from arch/arm/mach-s3c24xx/mach-amlm5900.c
rename to arch/arm/mach-s3c/mach-amlm5900.c
index 9a9daf5..94c4512 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c/mach-amlm5900.c
@@ -13,6 +13,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio.h>
#include <linux/device.h>
#include <linux/platform_device.h>
@@ -26,28 +27,24 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/gpio-cfg.h>
+#include "devs.h"
+#include "cpu.h"
+#include "gpio-cfg.h"
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
-#include <plat/samsung-time.h>
-
-#include "common.h"
+#include "s3c24xx.h"
static struct resource amlm5900_nor_resource =
DEFINE_RES_MEM(0x00000000, SZ_16M);
@@ -124,6 +121,19 @@ static struct s3c2410_uartcfg amlm5900_uartcfgs[] = {
}
};
+static struct gpiod_lookup_table amlm5900_mmc_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
static struct platform_device *amlm5900_devices[] __initdata = {
#ifdef CONFIG_FB_S3C2410
@@ -143,13 +153,13 @@ static void __init amlm5900_map_io(void)
{
s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init amlm5900_init_time(void)
{
s3c2410_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
#ifdef CONFIG_FB_S3C2410
@@ -180,13 +190,17 @@ static struct s3c2410fb_mach_info __initdata amlm5900_fb_info = {
.gpccon = 0xaaaaaaaa,
.gpccon_mask = 0xffffffff,
+ .gpccon_reg = S3C2410_GPCCON,
.gpcup = 0x0000ffff,
.gpcup_mask = 0xffffffff,
+ .gpcup_reg = S3C2410_GPCUP,
.gpdcon = 0xaaaaaaaa,
.gpdcon_mask = 0xffffffff,
+ .gpdcon_reg = S3C2410_GPDCON,
.gpdup = 0x0000ffff,
.gpdup_mask = 0xffffffff,
+ .gpdup_reg = S3C2410_GPDUP,
};
#endif
@@ -219,6 +233,7 @@ static void __init amlm5900_init(void)
s3c24xx_fb_set_platdata(&amlm5900_fb_info);
#endif
s3c_i2c0_set_platdata(NULL);
+ gpiod_add_lookup_table(&amlm5900_mmc_gpio_table);
platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices));
}
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c/mach-anubis.c
similarity index 96%
rename from arch/arm/mach-s3c24xx/mach-anubis.c
rename to arch/arm/mach-s3c/mach-anubis.c
index 2832624..90e3fd9 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c/mach-anubis.c
@@ -24,13 +24,11 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
@@ -41,13 +39,12 @@
#include <net/ax88796.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-#include <plat/samsung-time.h>
#include "anubis.h"
-#include "common.h"
+#include "s3c24xx.h"
#include "simtec.h"
#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
@@ -384,7 +381,7 @@ static void __init anubis_map_io(void)
{
s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
/* check for the newer revision boards with large page nand */
@@ -403,7 +400,7 @@ static void __init anubis_map_io(void)
static void __init anubis_init_time(void)
{
s3c2440_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init anubis_init(void)
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c/mach-anw6410.c
similarity index 93%
rename from arch/arm/mach-s3c64xx/mach-anw6410.c
rename to arch/arm/mach-s3c/mach-anw6410.c
index 0d3d5be..825714e 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c/mach-anw6410.c
@@ -30,24 +30,22 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
+#include "map.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/fb.h>
+#include "fb.h"
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include <mach/irqs.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <plat/samsung-time.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include "common.h"
-#include "regs-modem.h"
+#include "s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
/* DM9000 */
#define ANW6410_PA_DM9000 (0x18000000)
@@ -204,7 +202,7 @@ static void __init anw6410_map_io(void)
s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
anw6410_lcd_mode_set();
}
@@ -228,6 +226,5 @@ MACHINE_START(ANW6410, "A&W6410")
.init_irq = s3c6410_init_irq,
.map_io = anw6410_map_io,
.init_machine = anw6410_machine_init,
- .init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
+ .init_time = s3c64xx_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c/mach-at2440evb.c
similarity index 87%
rename from arch/arm/mach-s3c24xx/mach-at2440evb.c
rename to arch/arm/mach-s3c/mach-at2440evb.c
index 04dedeb..5fa49d4 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c/mach-at2440evb.c
@@ -24,14 +24,12 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
@@ -40,12 +38,11 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include <linux/platform_data/mmc-s3cmci.h>
-#include <plat/samsung-time.h>
-#include "common.h"
+#include "s3c24xx.h"
static struct map_desc at2440evb_iodesc[] __initdata = {
/* Nothing here */
@@ -136,18 +133,26 @@ static struct platform_device at2440evb_device_eth = {
};
static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
- /* Intentionally left blank */
+ .set_power = s3c24xx_mci_def_set_power,
};
static struct gpiod_lookup_table at2440evb_mci_gpio_table = {
.dev_id = "s3c2410-sdi",
.table = {
/* Card detect S3C2410_GPG(10) */
- GPIO_LOOKUP("GPG", 10, "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("GPIOG", 10, "cd", GPIO_ACTIVE_LOW),
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
{ },
},
};
+
/* 7" LCD panel */
static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
@@ -197,13 +202,13 @@ static void __init at2440evb_map_io(void)
{
s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init at2440evb_init_time(void)
{
s3c2440_init_clocks(16934400);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init at2440evb_init(void)
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c/mach-bast.c
similarity index 97%
rename from arch/arm/mach-s3c24xx/mach-bast.c
rename to arch/arm/mach-s3c/mach-bast.c
index 6465eab..328f5d9 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c/mach-bast.c
@@ -40,20 +40,17 @@
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
-#include <mach/fb.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/gpio-samsung.h>
+#include <linux/platform_data/fb-s3c2410.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include <plat/cpu.h>
-#include <plat/cpu-freq.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/samsung-time.h>
+#include "cpu.h"
+#include <linux/soc/samsung/s3c-cpu-freq.h>
+#include "devs.h"
+#include "gpio-cfg.h"
#include "bast.h"
-#include "common.h"
+#include "s3c24xx.h"
#include "simtec.h"
#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
@@ -550,13 +547,13 @@ static void __init bast_map_io(void)
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init bast_init_time(void)
{
s3c2410_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init bast_init(void)
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c/mach-crag6410-module.c
similarity index 98%
rename from arch/arm/mach-s3c64xx/mach-crag6410-module.c
rename to arch/arm/mach-s3c/mach-crag6410-module.c
index 34f1baa..407ad49 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c/mach-crag6410-module.c
@@ -27,7 +27,7 @@
#include <linux/platform_data/spi-s3c64xx.h>
-#include <plat/cpu.h>
+#include "cpu.h"
#include <mach/irqs.h>
#include "crag6410.h"
@@ -378,8 +378,7 @@ static const struct {
.i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c) },
};
-static int wlf_gf_module_probe(struct i2c_client *i2c,
- const struct i2c_device_id *i2c_id)
+static int wlf_gf_module_probe(struct i2c_client *i2c)
{
int ret, i, j, id, rev;
@@ -432,7 +431,7 @@ static struct i2c_driver wlf_gf_module_driver = {
.driver = {
.name = "wlf-gf-module"
},
- .probe = wlf_gf_module_probe,
+ .probe_new = wlf_gf_module_probe,
.id_table = wlf_gf_module_id,
};
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c/mach-crag6410.c
similarity index 97%
rename from arch/arm/mach-s3c64xx/mach-crag6410.c
rename to arch/arm/mach-s3c/mach-crag6410.c
index da96542..4a12c75 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c/mach-crag6410.c
@@ -44,30 +44,28 @@
#include <asm/mach-types.h>
#include <video/samsung_fimd.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <mach/irqs.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-#include <plat/gpio-cfg.h>
+#include "fb.h"
+#include "sdhci.h"
+#include "gpio-cfg.h"
#include <linux/platform_data/spi-s3c64xx.h>
-#include <plat/keypad.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/adc.h>
+#include "keypad.h"
+#include "devs.h"
+#include "cpu.h"
+#include <linux/soc/samsung/s3c-adc.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/pm.h>
-#include <plat/samsung-time.h>
+#include "pm.h"
-#include "common.h"
+#include "s3c64xx.h"
#include "crag6410.h"
-#include "regs-gpio-memport.h"
-#include "regs-modem.h"
-#include "regs-sys.h"
+#include "regs-gpio-memport-s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+#include "regs-sys-s3c64xx.h"
/* serial port setup */
@@ -750,7 +748,7 @@ static void __init crag6410_map_io(void)
s3c64xx_init_io(NULL, 0);
s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
/* LCD type and Bypass set by bootloader */
}
@@ -877,6 +875,5 @@ MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
.init_irq = s3c6410_init_irq,
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
- .init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
+ .init_time = s3c64xx_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c/mach-gta02.c
similarity index 92%
rename from arch/arm/mach-s3c24xx/mach-gta02.c
rename to arch/arm/mach-s3c/mach-gta02.c
index 7327481..3c75c7d 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c/mach-gta02.c
@@ -57,20 +57,18 @@
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/fb-s3c2410.h>
-#include <mach/fb.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-irq.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "regs-irq.h"
+#include "gpio-samsung.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/pm.h>
-#include <plat/samsung-time.h>
+#include "cpu.h"
+#include "devs.h"
+#include "gpio-cfg.h"
+#include "pm.h"
-#include "common.h"
+#include "s3c24xx.h"
#include "gta02.h"
static struct pcf50633 *gta02_pcf;
@@ -489,11 +487,25 @@ static struct platform_device gta02_audio = {
.id = -1,
};
+static struct gpiod_lookup_table gta02_mmc_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static void __init gta02_map_io(void)
{
s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
@@ -540,7 +552,12 @@ static void __init gta02_machine_init(void)
i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+
gpiod_add_lookup_table(>a02_audio_gpio_table);
+ gpiod_add_lookup_table(>a02_mmc_gpio_table);
platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
pm_power_off = gta02_poweroff;
@@ -550,7 +567,7 @@ static void __init gta02_machine_init(void)
static void __init gta02_init_time(void)
{
s3c2442_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
MACHINE_START(NEO1973_GTA02, "GTA02")
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c/mach-h1940.c
similarity index 94%
rename from arch/arm/mach-s3c24xx/mach-h1940.c
rename to arch/arm/mach-s3c/mach-h1940.c
index ecb8402..53d51aa 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c/mach-h1940.c
@@ -47,20 +47,19 @@
#include <sound/uda1380.h>
-#include <mach/fb.h>
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/gpio-samsung.h>
+#include <linux/platform_data/fb-s3c2410.h>
+#include "map.h"
+#include "hardware-s3c24xx.h"
+#include "regs-clock.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/pm.h>
-#include <plat/samsung-time.h>
+#include "cpu.h"
+#include "devs.h"
+#include "gpio-cfg.h"
+#include "pm.h"
-#include "common.h"
+#include "s3c24xx.h"
#include "h1940.h"
#define H1940_LATCH ((void __force __iomem *)0xF8000000)
@@ -180,9 +179,9 @@ static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
.cfg_gpio = s3c24xx_ts_cfg_gpio,
};
-/**
+/*
* Set lcd on or off
- **/
+ */
static struct s3c2410fb_display h1940_lcd __initdata = {
.lcdcon5= S3C2410_LCDCON5_FRM565 | \
S3C2410_LCDCON5_INVVLINE | \
@@ -211,12 +210,16 @@ static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
.lpcsel = 0x02,
.gpccon = 0xaa940659,
.gpccon_mask = 0xffffc0f0,
+ .gpccon_reg = S3C2410_GPCCON,
.gpcup = 0x0000ffff,
.gpcup_mask = 0xffffffff,
+ .gpcup_reg = S3C2410_GPCUP,
.gpdcon = 0xaa84aaa0,
.gpdcon_mask = 0xffffffff,
+ .gpdcon_reg = S3C2410_GPDCON,
.gpdup = 0x0000faff,
.gpdup_mask = 0xffffffff,
+ .gpdup_reg = S3C2410_GPDUP,
};
static int power_supply_init(struct device *dev)
@@ -446,6 +449,8 @@ static struct platform_device h1940_device_bluetooth = {
static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
{
+ s3c24xx_mci_def_set_power(power_mode, vdd);
+
switch (power_mode) {
case MMC_POWER_OFF:
gpio_set_value(H1940_LATCH_SD_POWER, 0);
@@ -468,9 +473,16 @@ static struct gpiod_lookup_table h1940_mmc_gpio_table = {
.dev_id = "s3c2410-sdi",
.table = {
/* Card detect S3C2410_GPF(5) */
- GPIO_LOOKUP("GPF", 5, "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
/* Write protect S3C2410_GPH(8) */
- GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
{ },
},
};
@@ -674,7 +686,7 @@ static void __init h1940_map_io(void)
{
s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
/* setup PM */
@@ -691,7 +703,7 @@ static void __init h1940_map_io(void)
static void __init h1940_init_time(void)
{
s3c2410_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
/* H1940 and RX3715 need to reserve this for suspend */
@@ -708,6 +720,9 @@ static void __init h1940_init(void)
s3c24xx_fb_set_platdata(&h1940_fb_info);
gpiod_add_lookup_table(&h1940_mmc_gpio_table);
gpiod_add_lookup_table(&h1940_audio_gpio_table);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
s3c24xx_udc_set_platdata(&h1940_udc_cfg);
s3c24xx_ts_set_platdata(&h1940_ts_cfg);
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c/mach-hmt.c
similarity index 94%
rename from arch/arm/mach-s3c64xx/mach-hmt.c
rename to arch/arm/mach-s3c/mach-hmt.c
index 0d9acaf..b287e99 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c/mach-hmt.c
@@ -25,23 +25,21 @@
#include <asm/mach/irq.h>
#include <video/samsung_fimd.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
+#include "map.h"
#include <mach/irqs.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/gpio-samsung.h>
-#include <plat/fb.h>
+#include "gpio-samsung.h"
+#include "fb.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/samsung-time.h>
+#include "devs.h"
+#include "cpu.h"
-#include "common.h"
+#include "s3c64xx.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
@@ -251,7 +249,7 @@ static void __init hmt_map_io(void)
s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
}
static void __init hmt_machine_init(void)
@@ -280,6 +278,5 @@ MACHINE_START(HMT, "Airgoo-HMT")
.init_irq = s3c6410_init_irq,
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
- .init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
+ .init_time = s3c64xx_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c/mach-jive.c
similarity index 97%
rename from arch/arm/mach-s3c24xx/mach-jive.c
rename to arch/arm/mach-s3c/mach-jive.c
index 8233dcf..2a29c3e 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c/mach-jive.c
@@ -31,10 +31,10 @@
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/fb.h>
-#include <mach/gpio-samsung.h>
+#include "hardware-s3c24xx.h"
+#include "regs-gpio.h"
+#include <linux/platform_data/fb-s3c2410.h>
+#include "gpio-samsung.h"
#include <asm/mach-types.h>
@@ -43,14 +43,13 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
+#include "pm.h"
#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <plat/samsung-time.h>
-#include "common.h"
+#include "s3c24xx.h"
#include "s3c2412-power.h"
static struct map_desc jive_iodesc[] __initdata = {
@@ -321,6 +320,7 @@ static struct s3c2410fb_mach_info jive_lcd_config = {
* data. */
.gpcup = (0xf << 1) | (0x3f << 10),
+ .gpcup_reg = S3C2410_GPCUP,
.gpccon = (S3C2410_GPC1_VCLK | S3C2410_GPC2_VLINE |
S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
@@ -334,8 +334,12 @@ static struct s3c2410fb_mach_info jive_lcd_config = {
S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
+ .gpccon_reg = S3C2410_GPCCON,
+
.gpdup = (0x3f << 2) | (0x3f << 10),
+ .gpdup_reg = S3C2410_GPDUP,
+
.gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 |
S3C2410_GPD4_VD12 | S3C2410_GPD5_VD13 |
S3C2410_GPD6_VD14 | S3C2410_GPD7_VD15 |
@@ -349,6 +353,8 @@ static struct s3c2410fb_mach_info jive_lcd_config = {
S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
+
+ .gpdcon_reg = S3C2410_GPDCON,
};
/* ILI9320 support. */
@@ -523,13 +529,13 @@ static void __init jive_map_io(void)
{
s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init jive_init_time(void)
{
s3c2412_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void jive_power_off(void)
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c/mach-mini2440.c
similarity index 94%
rename from arch/arm/mach-s3c24xx/mach-mini2440.c
rename to arch/arm/mach-s3c/mach-mini2440.c
index 057dcba..dc22ab83 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c/mach-mini2440.c
@@ -30,15 +30,13 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
+#include "regs-gpio.h"
#include <linux/platform_data/leds-s3c24xx.h>
-#include <mach/regs-lcd.h>
#include <mach/irqs.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/mmc-s3cmci.h>
@@ -49,14 +47,13 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/samsung-time.h>
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
#include <sound/s3c24xx_uda134x.h>
-#include "common.h"
+#include "s3c24xx.h"
#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300)
@@ -215,6 +212,9 @@ static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
+ .gpccon_reg = S3C2410_GPCCON,
+ .gpcup_reg = S3C2410_GPCUP,
+
.gpdup = (0x3f << 2) | (0x3f << 10),
.gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 |
@@ -230,13 +230,16 @@ static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
+
+ .gpdcon_reg = S3C2410_GPDCON,
+ .gpdup_reg = S3C2410_GPDUP,
};
/* MMC/SD */
static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
.wprotect_invert = 1,
- .set_power = NULL,
+ .set_power = s3c24xx_mci_def_set_power,
.ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
};
@@ -244,9 +247,16 @@ static struct gpiod_lookup_table mini2440_mmc_gpio_table = {
.dev_id = "s3c2410-sdi",
.table = {
/* Card detect S3C2410_GPG(8) */
- GPIO_LOOKUP("GPG", 8, "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("GPIOG", 8, "cd", GPIO_ACTIVE_LOW),
/* Write protect S3C2410_GPH(8) */
- GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_HIGH),
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
{ },
},
};
@@ -587,13 +597,13 @@ static void __init mini2440_map_io(void)
{
s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init mini2440_init_time(void)
{
s3c2440_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
/*
@@ -716,6 +726,11 @@ static void __init mini2440_init(void)
s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT);
}
+
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+
if (features.lcd_index != -1) {
int li;
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c/mach-mini6410.c
similarity index 95%
rename from arch/arm/mach-s3c64xx/mach-mini6410.c
rename to arch/arm/mach-s3c/mach-mini6410.c
index 6fbb578..741fa1f 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c/mach-mini6410.c
@@ -23,27 +23,26 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include <plat/adc.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
+#include <linux/soc/samsung/s3c-adc.h>
+#include "cpu.h"
+#include "devs.h"
+#include "fb.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/mmc-sdhci-s3c.h>
-#include <plat/sdhci.h>
+#include "sdhci.h"
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <mach/irqs.h>
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
-#include <plat/samsung-time.h>
-#include "common.h"
-#include "regs-modem.h"
-#include "regs-srom.h"
+#include "s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+#include "regs-srom-s3c64xx.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
@@ -238,7 +237,7 @@ static void __init mini6410_map_io(void)
s3c64xx_init_io(NULL, 0);
s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
@@ -362,6 +361,5 @@ MACHINE_START(MINI6410, "MINI6410")
.init_irq = s3c6410_init_irq,
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
- .init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
+ .init_time = s3c64xx_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c/mach-n30.c
similarity index 94%
rename from arch/arm/mach-s3c24xx/mach-n30.c
rename to arch/arm/mach-s3c/mach-n30.c
index 998ccff..e40c1fc 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c/mach-n30.c
@@ -27,15 +27,15 @@
#include <linux/io.h>
#include <linux/mmc/host.h>
-#include <mach/hardware.h>
+#include "hardware-s3c24xx.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <linux/platform_data/leds-s3c24xx.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
@@ -43,14 +43,12 @@
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
+#include "cpu.h"
+#include "devs.h"
#include <linux/platform_data/mmc-s3cmci.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <plat/samsung-time.h>
-#include "common.h"
+#include "s3c24xx.h"
static struct map_desc n30_iodesc[] __initdata = {
/* nothing here yet */
@@ -368,6 +366,8 @@ static struct s3c2410fb_mach_info n30_fb_info __initdata = {
static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd)
{
+ s3c24xx_mci_def_set_power(power_mode, vdd);
+
switch (power_mode) {
case MMC_POWER_ON:
case MMC_POWER_UP:
@@ -389,10 +389,17 @@ static struct gpiod_lookup_table n30_mci_gpio_table = {
.dev_id = "s3c2410-sdi",
.table = {
/* Card detect S3C2410_GPF(1) */
- GPIO_LOOKUP("GPF", 1, "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("GPIOF", 1, "cd", GPIO_ACTIVE_LOW),
/* Write protect S3C2410_GPG(10) */
- GPIO_LOOKUP("GPG", 10, "wp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("GPIOG", 10, "wp", GPIO_ACTIVE_LOW),
{ },
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
},
};
@@ -572,13 +579,13 @@ static void __init n30_map_io(void)
s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
n30_hwinit();
s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init n30_init_time(void)
{
s3c2410_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
/* GPB3 is the line that controls the pull-up for the USB D+ line */
@@ -600,6 +607,10 @@ static void __init n30_init(void)
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+
if (machine_is_n30()) {
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c/mach-ncp.c
similarity index 87%
rename from arch/arm/mach-s3c64xx/mach-ncp.c
rename to arch/arm/mach-s3c/mach-ncp.c
index 13fea5c..1a45bed 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c/mach-ncp.c
@@ -25,20 +25,18 @@
#include <asm/mach/irq.h>
#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
+#include "map.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/fb.h>
+#include "fb.h"
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/samsung-time.h>
+#include "devs.h"
+#include "cpu.h"
-#include "common.h"
+#include "s3c64xx.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
@@ -81,7 +79,7 @@ static void __init ncp_map_io(void)
s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
}
static void __init ncp_machine_init(void)
@@ -98,6 +96,5 @@ MACHINE_START(NCP, "NCP")
.init_irq = s3c6410_init_irq,
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
- .init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
+ .init_time = s3c64xx_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c/mach-nexcoder.c
similarity index 90%
rename from arch/arm/mach-s3c24xx/mach-nexcoder.c
rename to arch/arm/mach-s3c/mach-nexcoder.c
index c2f3475..2a454c9 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c/mach-nexcoder.c
@@ -28,21 +28,19 @@
#include <asm/mach/irq.h>
#include <asm/setup.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
//#include <asm/debug-ll.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/samsung-time.h>
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
-#include "common.h"
+#include "s3c24xx.h"
static struct map_desc nexcoder_iodesc[] __initdata = {
/* nothing here yet */
@@ -131,7 +129,7 @@ static void __init nexcoder_map_io(void)
{
s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
nexcoder_sensorboard_init();
}
@@ -139,12 +137,17 @@ static void __init nexcoder_map_io(void)
static void __init nexcoder_init_time(void)
{
s3c2440_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init nexcoder_init(void)
{
s3c_i2c0_set_platdata(NULL);
+
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+
platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
};
diff --git a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c b/arch/arm/mach-s3c/mach-osiris-dvs.c
similarity index 97%
rename from arch/arm/mach-s3c24xx/mach-osiris-dvs.c
rename to arch/arm/mach-s3c/mach-osiris-dvs.c
index 5d819b6..2e283ae 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
+++ b/arch/arm/mach-s3c/mach-osiris-dvs.c
@@ -14,8 +14,8 @@
#include <linux/mfd/tps65010.h>
-#include <plat/cpu-freq.h>
-#include <mach/gpio-samsung.h>
+#include <linux/soc/samsung/s3c-cpu-freq.h>
+#include "gpio-samsung.h"
#define OSIRIS_GPIO_DVS S3C2410_GPB(5)
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c/mach-osiris.c
similarity index 96%
rename from arch/arm/mach-s3c24xx/mach-osiris.c
rename to arch/arm/mach-s3c/mach-osiris.c
index 1574488..81744ca 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c/mach-osiris.c
@@ -36,20 +36,17 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/cpu.h>
-#include <plat/cpu-freq.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/samsung-time.h>
+#include "cpu.h"
+#include <linux/soc/samsung/s3c-cpu-freq.h>
+#include "devs.h"
+#include "gpio-cfg.h"
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include "common.h"
+#include "s3c24xx.h"
#include "osiris.h"
-#include "regs-mem.h"
+#include "regs-mem-s3c24xx.h"
/* onboard perihperal map */
@@ -359,7 +356,7 @@ static void __init osiris_map_io(void)
s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
/* check for the newer revision boards with large page nand */
@@ -384,7 +381,7 @@ static void __init osiris_map_io(void)
static void __init osiris_init_time(void)
{
s3c2440_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init osiris_init(void)
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c/mach-otom.c
similarity index 88%
rename from arch/arm/mach-s3c24xx/mach-otom.c
rename to arch/arm/mach-s3c/mach-otom.c
index 4e24d89..460ee97 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c/mach-otom.c
@@ -22,14 +22,13 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/samsung-time.h>
+#include "cpu.h"
+#include "devs.h"
-#include "common.h"
+#include "s3c24xx.h"
#include "otom.h"
static struct map_desc otom11_iodesc[] __initdata = {
@@ -95,18 +94,22 @@ static void __init otom11_map_io(void)
{
s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init otom11_init_time(void)
{
s3c2410_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init otom11_init(void)
{
s3c_i2c0_set_platdata(NULL);
+
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices));
}
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c/mach-qt2410.c
similarity index 88%
rename from arch/arm/mach-s3c24xx/mach-qt2410.c
rename to arch/arm/mach-s3c/mach-qt2410.c
index f3131d9..151e8e3 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c/mach-qt2410.c
@@ -28,26 +28,23 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/leds-s3c24xx.h>
-#include <mach/regs-lcd.h>
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/samsung-time.h>
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
+#include "pm.h"
-#include "common.h"
-#include "common-smdk.h"
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
static struct map_desc qt2410_iodesc[] __initdata = {
{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
@@ -225,6 +222,20 @@ static struct gpiod_lookup_table qt2410_spi_gpiod_table = {
},
};
+static struct gpiod_lookup_table qt2410_mmc_gpiod_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
/* Board devices */
static struct platform_device *qt2410_devices[] __initdata = {
@@ -309,13 +320,13 @@ static void __init qt2410_map_io(void)
{
s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init qt2410_init_time(void)
{
s3c2410_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init qt2410_machine_init(void)
@@ -343,9 +354,13 @@ static void __init qt2410_machine_init(void)
s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
s3c_i2c0_set_platdata(NULL);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
gpiod_add_lookup_table(&qt2410_spi_gpiod_table);
s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
gpiod_add_lookup_table(&qt2410_led_gpio_table);
+ gpiod_add_lookup_table(&qt2410_mmc_gpiod_table);
platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
s3c_pm_init();
}
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c/mach-real6410.c
similarity index 94%
rename from arch/arm/mach-s3c64xx/mach-real6410.c
rename to arch/arm/mach-s3c/mach-real6410.c
index 1e98e53..9d218a5 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c/mach-real6410.c
@@ -24,25 +24,24 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <mach/irqs.h>
-#include <plat/adc.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
+#include <linux/soc/samsung/s3c-adc.h>
+#include "cpu.h"
+#include "devs.h"
+#include "fb.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
-#include <plat/samsung-time.h>
-#include "common.h"
-#include "regs-modem.h"
-#include "regs-srom.h"
+#include "s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+#include "regs-srom-s3c64xx.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
@@ -208,7 +207,7 @@ static void __init real6410_map_io(void)
s3c64xx_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
@@ -330,6 +329,5 @@ MACHINE_START(REAL6410, "REAL6410")
.init_irq = s3c6410_init_irq,
.map_io = real6410_map_io,
.init_machine = real6410_machine_init,
- .init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
+ .init_time = s3c64xx_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c
similarity index 94%
rename from arch/arm/mach-s3c24xx/mach-rx1950.c
rename to arch/arm/mach-s3c/mach-rx1950.c
index 3645b9c..b9758f0 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c/mach-rx1950.c
@@ -42,21 +42,20 @@
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <sound/uda1380.h>
-#include <mach/fb.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/gpio-samsung.h>
+#include "hardware-s3c24xx.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/samsung-time.h>
-#include <plat/gpio-cfg.h>
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
+#include "gpio-cfg.h"
-#include "common.h"
+#include "s3c24xx.h"
#include "h1940.h"
#define LCD_PWM_PERIOD 192960
@@ -361,14 +360,17 @@ static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
.lpcsel = 0x02,
.gpccon = 0xaa9556a9,
.gpccon_mask = 0xffc003fc,
+ .gpccon_reg = S3C2410_GPCCON,
.gpcup = 0x0000ffff,
.gpcup_mask = 0xffffffff,
+ .gpcup_reg = S3C2410_GPCUP,
.gpdcon = 0xaa90aaa1,
.gpdcon_mask = 0xffc0fff0,
+ .gpdcon_reg = S3C2410_GPDCON,
.gpdup = 0x0000fcfd,
.gpdup_mask = 0xffffffff,
-
+ .gpdup_reg = S3C2410_GPDUP,
};
static struct pwm_lookup rx1950_pwm_lookup[] = {
@@ -549,6 +551,8 @@ static struct platform_device rx1950_backlight = {
static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
{
+ s3c24xx_mci_def_set_power(power_mode, vdd);
+
switch (power_mode) {
case MMC_POWER_OFF:
gpio_direction_output(S3C2410_GPJ(1), 0);
@@ -571,9 +575,16 @@ static struct gpiod_lookup_table rx1950_mmc_gpio_table = {
.dev_id = "s3c2410-sdi",
.table = {
/* Card detect S3C2410_GPF(5) */
- GPIO_LOOKUP("GPF", 5, "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
/* Write protect S3C2410_GPH(8) */
- GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
{ },
},
};
@@ -767,7 +778,7 @@ static void __init rx1950_map_io(void)
{
s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
/* setup PM */
@@ -781,7 +792,7 @@ static void __init rx1950_map_io(void)
static void __init rx1950_init_time(void)
{
s3c2442_init_clocks(16934000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init rx1950_init_machine(void)
@@ -829,6 +840,9 @@ static void __init rx1950_init_machine(void)
pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup));
gpiod_add_lookup_table(&rx1950_audio_gpio_table);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
i2c_register_board_info(0, rx1950_i2c_devices,
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c/mach-rx3715.c
similarity index 89%
rename from arch/arm/mach-s3c24xx/mach-rx3715.c
rename to arch/arm/mach-s3c/mach-rx3715.c
index 017010d..a03662a 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c/mach-rx3715.c
@@ -30,22 +30,20 @@
#include <asm/mach/map.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/fb.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/samsung-time.h>
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
-#include "common.h"
+#include "s3c24xx.h"
#include "h1940.h"
static struct map_desc rx3715_iodesc[] __initdata = {
@@ -125,13 +123,17 @@ static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
.gpccon = 0xaa955699,
.gpccon_mask = 0xffc003cc,
+ .gpccon_reg = S3C2410_GPCCON,
.gpcup = 0x0000ffff,
.gpcup_mask = 0xffffffff,
+ .gpcup_reg = S3C2410_GPCUP,
.gpdcon = 0xaa95aaa1,
.gpdcon_mask = 0xffc0fff0,
+ .gpdcon_reg = S3C2410_GPDCON,
.gpdup = 0x0000faff,
.gpdup_mask = 0xffffffff,
+ .gpdup_reg = S3C2410_GPDUP,
};
static struct mtd_partition __initdata rx3715_nand_part[] = {
@@ -174,13 +176,13 @@ static void __init rx3715_map_io(void)
{
s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init rx3715_init_time(void)
{
s3c2440_init_clocks(16934000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
/* H1940 and RX3715 need to reserve this for suspend */
@@ -199,6 +201,9 @@ static void __init rx3715_init_machine(void)
s3c_nand_set_platdata(&rx3715_nand_info);
s3c24xx_fb_set_platdata(&rx3715_fb_info);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
}
diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c/mach-s3c2416-dt.c
similarity index 91%
rename from arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
rename to arch/arm/mach-s3c/mach-s3c2416-dt.c
index aa71027..418544d 100644
--- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
+++ b/arch/arm/mach-s3c/mach-s3c2416-dt.c
@@ -16,12 +16,12 @@
#include <linux/serial_s3c.h>
#include <asm/mach/arch.h>
-#include <mach/map.h>
+#include "map.h"
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "cpu.h"
+#include "pm.h"
-#include "common.h"
+#include "s3c24xx.h"
static void __init s3c2416_dt_map_io(void)
{
diff --git a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c b/arch/arm/mach-s3c/mach-s3c64xx-dt.c
similarity index 70%
rename from arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
rename to arch/arm/mach-s3c/mach-s3c64xx-dt.c
index 1724f5e..00169c1 100644
--- a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
+++ b/arch/arm/mach-s3c/mach-s3c64xx-dt.c
@@ -8,11 +8,10 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
-#include <plat/cpu.h>
-#include <mach/map.h>
+#include "cpu.h"
+#include "map.h"
-#include "common.h"
-#include "watchdog-reset.h"
+#include "s3c64xx.h"
/*
* IO mapping for shared system controller IP.
@@ -39,20 +38,6 @@ static void __init s3c64xx_dt_map_io(void)
panic("SoC is not S3C64xx!");
}
-static void __init s3c64xx_dt_init_machine(void)
-{
- samsung_wdt_reset_of_init();
-}
-
-static void s3c64xx_dt_restart(enum reboot_mode mode, const char *cmd)
-{
- if (mode != REBOOT_SOFT)
- samsung_wdt_reset();
-
- /* if all else fails, or mode was for soft, jump to 0 */
- soft_restart(0);
-}
-
static const char *const s3c64xx_dt_compat[] __initconst = {
"samsung,s3c6400",
"samsung,s3c6410",
@@ -63,6 +48,4 @@ DT_MACHINE_START(S3C6400_DT, "Samsung S3C64xx (Flattened Device Tree)")
/* Maintainer: Tomasz Figa <tomasz.figa@gmail.com> */
.dt_compat = s3c64xx_dt_compat,
.map_io = s3c64xx_dt_map_io,
- .init_machine = s3c64xx_dt_init_machine,
- .restart = s3c64xx_dt_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c/mach-smartq.c
similarity index 96%
rename from arch/arm/mach-s3c64xx/mach-smartq.c
rename to arch/arm/mach-s3c/mach-smartq.c
index 5025db6..5b6e7c2 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c/mach-smartq.c
@@ -18,25 +18,24 @@
#include <asm/mach-types.h>
#include <asm/mach/map.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
+#include "cpu.h"
+#include "devs.h"
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
+#include "gpio-cfg.h"
#include <linux/platform_data/hwmon-s3c.h>
#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include <plat/sdhci.h>
+#include "sdhci.h"
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <video/platform_lcd.h>
-#include <plat/samsung-time.h>
-#include "common.h"
+#include "s3c64xx.h"
#include "mach-smartq.h"
-#include "regs-modem.h"
+#include "regs-modem-s3c64xx.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
@@ -384,7 +383,7 @@ void __init smartq_map_io(void)
s3c64xx_set_xtal_freq(12000000);
s3c64xx_set_xusbxti_freq(12000000);
s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
smartq_lcd_mode_set();
}
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.h b/arch/arm/mach-s3c/mach-smartq.h
similarity index 100%
rename from arch/arm/mach-s3c64xx/mach-smartq.h
rename to arch/arm/mach-s3c/mach-smartq.h
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c/mach-smartq5.c
similarity index 91%
rename from arch/arm/mach-s3c64xx/mach-smartq5.c
rename to arch/arm/mach-s3c/mach-smartq5.c
index 44e9edb..8c94022 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c/mach-smartq5.c
@@ -15,17 +15,16 @@
#include <video/samsung_fimd.h>
#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-#include <plat/samsung-time.h>
+#include "cpu.h"
+#include "devs.h"
+#include "fb.h"
+#include "gpio-cfg.h"
-#include "common.h"
+#include "s3c64xx.h"
#include "mach-smartq.h"
static struct gpio_led smartq5_leds[] = {
@@ -151,6 +150,5 @@ MACHINE_START(SMARTQ5, "SmartQ 5")
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
- .init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
+ .init_time = s3c64xx_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c/mach-smartq7.c
similarity index 92%
rename from arch/arm/mach-s3c64xx/mach-smartq7.c
rename to arch/arm/mach-s3c/mach-smartq7.c
index 815ee7d..ab24396 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c/mach-smartq7.c
@@ -15,17 +15,16 @@
#include <video/samsung_fimd.h>
#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-#include <plat/samsung-time.h>
+#include "cpu.h"
+#include "devs.h"
+#include "fb.h"
+#include "gpio-cfg.h"
-#include "common.h"
+#include "s3c64xx.h"
#include "mach-smartq.h"
static struct gpio_led smartq7_leds[] = {
@@ -167,6 +166,5 @@ MACHINE_START(SMARTQ7, "SmartQ 7")
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
- .init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
+ .init_time = s3c64xx_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c/mach-smdk2410.c
similarity index 86%
rename from arch/arm/mach-s3c24xx/mach-smdk2410.c
rename to arch/arm/mach-s3c/mach-smdk2410.c
index 18dfef5..ca83d5a 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c/mach-smdk2410.c
@@ -19,23 +19,23 @@
#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/samsung-time.h>
+#include "devs.h"
+#include "cpu.h"
-#include "common.h"
-#include "common-smdk.h"
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
static struct map_desc smdk2410_iodesc[] __initdata = {
/* nothing here yet */
@@ -81,19 +81,22 @@ static void __init smdk2410_map_io(void)
{
s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init smdk2410_init_time(void)
{
s3c2410_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init smdk2410_init(void)
{
s3c_i2c0_set_platdata(NULL);
platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices));
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
smdk_machine_init();
}
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c/mach-smdk2413.c
similarity index 86%
rename from arch/arm/mach-s3c24xx/mach-smdk2413.c
rename to arch/arm/mach-s3c/mach-smdk2413.c
index ca80167..c43095b 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c/mach-smdk2413.c
@@ -23,27 +23,26 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/hardware/iomd.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
//#include <asm/debug-ll.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
+#include "hardware-s3c24xx.h"
+#include "regs-gpio.h"
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/gpio-samsung.h>
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/samsung-time.h>
+#include "devs.h"
+#include "cpu.h"
-#include "common.h"
-#include "common-smdk.h"
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
static struct map_desc smdk2413_iodesc[] __initdata = {
};
@@ -99,13 +98,13 @@ static void __init smdk2413_map_io(void)
{
s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init smdk2413_init_time(void)
{
s3c2412_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init smdk2413_machine_init(void)
@@ -119,6 +118,9 @@ static void __init smdk2413_machine_init(void)
s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
s3c_i2c0_set_platdata(NULL);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices));
smdk_machine_init();
@@ -132,7 +134,7 @@ MACHINE_START(S3C2413, "S3C2413")
.init_irq = s3c2412_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = s3c24xx_timer_init,
MACHINE_END
MACHINE_START(SMDK2412, "SMDK2412")
@@ -143,7 +145,7 @@ MACHINE_START(SMDK2412, "SMDK2412")
.init_irq = s3c2412_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = s3c24xx_timer_init,
MACHINE_END
MACHINE_START(SMDK2413, "SMDK2413")
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c/mach-smdk2416.c
similarity index 93%
rename from arch/arm/mach-s3c24xx/mach-smdk2416.c
rename to arch/arm/mach-s3c/mach-smdk2416.c
index 61c3e45..4d883a7 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c/mach-smdk2416.c
@@ -25,31 +25,29 @@
#include <asm/mach/irq.h>
#include <video/samsung_fimd.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-s3c2443-clock.h>
-#include <mach/gpio-samsung.h>
+#include "hardware-s3c24xx.h"
+#include "regs-gpio.h"
+#include "regs-s3c2443-clock.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/leds-s3c24xx.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/sdhci.h>
+#include "sdhci.h"
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/s3c-hsudc.h>
-#include <plat/samsung-time.h>
-#include <plat/fb.h>
+#include "fb.h"
-#include "common.h"
-#include "common-smdk.h"
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
static struct map_desc smdk2416_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
@@ -215,14 +213,14 @@ static struct platform_device *smdk2416_devices[] __initdata = {
static void __init smdk2416_init_time(void)
{
s3c2416_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init smdk2416_map_io(void)
{
s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init smdk2416_machine_init(void)
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c/mach-smdk2440.c
similarity index 87%
rename from arch/arm/mach-s3c24xx/mach-smdk2440.c
rename to arch/arm/mach-s3c/mach-smdk2440.c
index 7bafcd8..7f6fe0d 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c/mach-smdk2440.c
@@ -23,22 +23,21 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/samsung-time.h>
+#include "devs.h"
+#include "cpu.h"
-#include "common.h"
-#include "common-smdk.h"
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
static struct map_desc smdk2440_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
@@ -137,6 +136,11 @@ static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
.gpdcon_mask = 0xffffffff,
.gpdup = 0x0000faff,
.gpdup_mask = 0xffffffff,
+
+ .gpccon_reg = S3C2410_GPCCON,
+ .gpcup_reg = S3C2410_GPCUP,
+ .gpdcon_reg = S3C2410_GPDCON,
+ .gpdup_reg = S3C2410_GPDUP,
#endif
.lpcsel = ((0xCE6) & ~7) | 1<<4,
@@ -154,20 +158,22 @@ static void __init smdk2440_map_io(void)
{
s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init smdk2440_init_time(void)
{
s3c2440_init_clocks(16934400);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init smdk2440_machine_init(void)
{
s3c24xx_fb_set_platdata(&smdk2440_fb_info);
s3c_i2c0_set_platdata(NULL);
-
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
smdk_machine_init();
}
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c/mach-smdk2443.c
similarity index 90%
rename from arch/arm/mach-s3c24xx/mach-smdk2443.c
rename to arch/arm/mach-s3c/mach-smdk2443.c
index 2358ed5..fc54c91 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c/mach-smdk2443.c
@@ -22,22 +22,19 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
+#include "regs-gpio.h"
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/samsung-time.h>
+#include "devs.h"
+#include "cpu.h"
-#include "common.h"
-#include "common-smdk.h"
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
static struct map_desc smdk2443_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
@@ -112,13 +109,13 @@ static void __init smdk2443_map_io(void)
{
s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init smdk2443_init_time(void)
{
s3c2443_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init smdk2443_machine_init(void)
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c/mach-smdk6400.c
similarity index 87%
rename from arch/arm/mach-s3c64xx/mach-smdk6400.c
rename to arch/arm/mach-s3c/mach-smdk6400.c
index cbd1684..8272213 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c/mach-smdk6400.c
@@ -23,16 +23,14 @@
#include <asm/mach/irq.h>
#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
+#include "map.h"
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/gpio-samsung.h>
-#include <plat/samsung-time.h>
+#include "gpio-samsung.h"
-#include "common.h"
+#include "s3c64xx.h"
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
@@ -62,7 +60,7 @@ static void __init smdk6400_map_io(void)
s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
}
static struct platform_device *smdk6400_devices[] __initdata = {
@@ -88,6 +86,5 @@ MACHINE_START(SMDK6400, "SMDK6400")
.init_irq = s3c6400_init_irq,
.map_io = smdk6400_map_io,
.init_machine = smdk6400_machine_init,
- .init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
+ .init_time = s3c64xx_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c/mach-smdk6410.c
similarity index 96%
rename from arch/arm/mach-s3c64xx/mach-smdk6410.c
rename to arch/arm/mach-s3c/mach-smdk6410.c
index 56f406c..ae18c13 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c/mach-smdk6410.c
@@ -45,32 +45,30 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/map.h>
+#include "map.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/ata-samsung_cf.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
+#include "fb.h"
+#include "gpio-cfg.h"
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/adc.h>
+#include "devs.h"
+#include "cpu.h"
+#include <linux/soc/samsung/s3c-adc.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <plat/keypad.h>
-#include <plat/samsung-time.h>
+#include "keypad.h"
-#include "backlight.h"
-#include "common.h"
-#include "regs-modem.h"
-#include "regs-srom.h"
-#include "regs-sys.h"
+#include "backlight-s3c64xx.h"
+#include "s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+#include "regs-srom-s3c64xx.h"
+#include "regs-sys-s3c64xx.h"
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
@@ -635,7 +633,7 @@ static void __init smdk6410_map_io(void)
s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
/* set the LCD type */
@@ -704,6 +702,5 @@ MACHINE_START(SMDK6410, "SMDK6410")
.init_irq = s3c6410_init_irq,
.map_io = smdk6410_map_io,
.init_machine = smdk6410_machine_init,
- .init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
+ .init_time = s3c64xx_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c/mach-tct_hammer.c
similarity index 81%
rename from arch/arm/mach-s3c24xx/mach-tct_hammer.c
rename to arch/arm/mach-s3c/mach-tct_hammer.c
index 8d8ddd6..2a61df3 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c/mach-tct_hammer.c
@@ -7,6 +7,7 @@
// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
// Ben Dooks <ben@simtec.co.uk>
+#include <linux/gpio/machine.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
@@ -24,21 +25,19 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
-#include <plat/samsung-time.h>
-#include "common.h"
+#include "s3c24xx.h"
static struct resource tct_hammer_nor_resource =
DEFINE_RES_MEM(0x00000000, SZ_16M);
@@ -103,6 +102,19 @@ static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = {
}
};
+static struct gpiod_lookup_table tct_hammer_mmc_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
static struct platform_device *tct_hammer_devices[] __initdata = {
&s3c_device_adc,
@@ -119,18 +131,19 @@ static void __init tct_hammer_map_io(void)
{
s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init tct_hammer_init_time(void)
{
s3c2410_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init tct_hammer_init(void)
{
s3c_i2c0_set_platdata(NULL);
+ gpiod_add_lookup_table(&tct_hammer_mmc_gpio_table);
platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices));
}
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c/mach-vr1000.c
similarity index 96%
rename from arch/arm/mach-s3c24xx/mach-vr1000.c
rename to arch/arm/mach-s3c/mach-vr1000.c
index 6a3fb2b..5c3d07c 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c/mach-vr1000.c
@@ -35,17 +35,15 @@
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/samsung-time.h>
+#include "cpu.h"
+#include "devs.h"
#include "bast.h"
-#include "common.h"
+#include "s3c24xx.h"
#include "simtec.h"
#include "vr1000.h"
@@ -328,13 +326,13 @@ static void __init vr1000_map_io(void)
s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init vr1000_init_time(void)
{
s3c2410_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init vr1000_init(void)
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c/mach-vstms.c
similarity index 88%
rename from arch/arm/mach-s3c24xx/mach-vstms.c
rename to arch/arm/mach-s3c/mach-vstms.c
index c5fa215..05f19f5 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c/mach-vstms.c
@@ -24,24 +24,23 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/samsung-time.h>
+#include "devs.h"
+#include "cpu.h"
-#include "common.h"
+#include "s3c24xx.h"
static struct map_desc vstms_iodesc[] __initdata = {
};
@@ -136,20 +135,22 @@ static void __init vstms_map_io(void)
{
s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init vstms_init_time(void)
{
s3c2412_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init vstms_init(void)
{
s3c_i2c0_set_platdata(NULL);
s3c_nand_set_platdata(&vstms_nand_info);
-
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
}
diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/mach-s3c/map-s3c.h
similarity index 87%
rename from arch/arm/plat-samsung/include/plat/map-s3c.h
rename to arch/arm/mach-s3c/map-s3c.h
index 4244acbf..a18fdd3 100644
--- a/arch/arm/plat-samsung/include/plat/map-s3c.h
+++ b/arch/arm/mach-s3c/map-s3c.h
@@ -9,6 +9,8 @@
#ifndef __ASM_PLAT_MAP_S3C_H
#define __ASM_PLAT_MAP_S3C_H __FILE__
+#include "map.h"
+
#define S3C24XX_VA_IRQ S3C_VA_IRQ
#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
#define S3C24XX_VA_UART S3C_VA_UART
@@ -45,16 +47,8 @@
#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
-/*
- * ISA style IO, for each machine to sort out mappings for,
- * if it implements it. We reserve two 16M regions for ISA.
- */
-
#define S3C2410_ADDR(x) S3C_ADDR(x)
-#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
-
/* deal with the registers that move under the 2412/2413 */
#if defined(CONFIG_CPU_S3C2412)
@@ -71,6 +65,6 @@ extern void __iomem *s3c24xx_va_gpio2;
#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
#endif
-#include <plat/map-s5p.h>
+#include "map-s5p.h"
#endif /* __ASM_PLAT_MAP_S3C_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/map.h b/arch/arm/mach-s3c/map-s3c24xx.h
similarity index 96%
rename from arch/arm/mach-s3c24xx/include/mach/map.h
rename to arch/arm/mach-s3c/map-s3c24xx.h
index bca9311..b5dba78 100644
--- a/arch/arm/mach-s3c24xx/include/mach/map.h
+++ b/arch/arm/mach-s3c/map-s3c24xx.h
@@ -9,8 +9,8 @@
#ifndef __ASM_ARCH_MAP_H
#define __ASM_ARCH_MAP_H
-#include <plat/map-base.h>
-#include <plat/map-s3c.h>
+#include <mach/map-base.h>
+#include "map-s3c.h"
/*
* interrupt controller is the first thing we put in, to make
@@ -86,6 +86,8 @@
#define S3C2410_PA_SPI (0x59000000)
#define S3C2443_PA_SPI0 (0x52000000)
#define S3C2443_PA_SPI1 S3C2410_PA_SPI
+#define S3C2410_SPI1 (0x20)
+#define S3C2412_SPI1 (0x100)
/* SDI */
#define S3C2410_PA_SDI (0x5A000000)
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c/map-s3c64xx.h
similarity index 97%
rename from arch/arm/mach-s3c64xx/include/mach/map.h
rename to arch/arm/mach-s3c/map-s3c64xx.h
index 9372a53..d7740d2 100644
--- a/arch/arm/mach-s3c64xx/include/mach/map.h
+++ b/arch/arm/mach-s3c/map-s3c64xx.h
@@ -11,8 +11,8 @@
#ifndef __ASM_ARCH_MAP_H
#define __ASM_ARCH_MAP_H __FILE__
-#include <plat/map-base.h>
-#include <plat/map-s3c.h>
+#include <mach/map-base.h>
+#include "map-s3c.h"
/*
* Post-mux Chip Select Regions Xm0CSn_
diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/mach-s3c/map-s5p.h
similarity index 85%
rename from arch/arm/plat-samsung/include/plat/map-s5p.h
rename to arch/arm/mach-s3c/map-s5p.h
index d69a0ca..cd23792 100644
--- a/arch/arm/plat-samsung/include/plat/map-s5p.h
+++ b/arch/arm/mach-s3c/map-s5p.h
@@ -9,14 +9,12 @@
#ifndef __ASM_PLAT_MAP_S5P_H
#define __ASM_PLAT_MAP_S5P_H __FILE__
-#define S5P_VA_CHIPID S3C_ADDR(0x02000000)
-
#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
#define VA_VIC0 VA_VIC(0)
#define VA_VIC1 VA_VIC(1)
#define VA_VIC2 VA_VIC(2)
#define VA_VIC3 VA_VIC(3)
-#include <plat/map-s3c.h>
+#include "map-s3c.h"
#endif /* __ASM_PLAT_MAP_S5P_H */
diff --git a/arch/arm/mach-s3c/map.h b/arch/arm/mach-s3c/map.h
new file mode 100644
index 0000000..7cfb517
--- /dev/null
+++ b/arch/arm/mach-s3c/map.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "map-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "map-s3c64xx.h"
+#endif
diff --git a/arch/arm/mach-s3c24xx/nand-core.h b/arch/arm/mach-s3c/nand-core-s3c24xx.h
similarity index 77%
rename from arch/arm/mach-s3c24xx/nand-core.h
rename to arch/arm/mach-s3c/nand-core-s3c24xx.h
index 8de633d..a143167 100644
--- a/arch/arm/mach-s3c24xx/nand-core.h
+++ b/arch/arm/mach-s3c/nand-core-s3c24xx.h
@@ -6,8 +6,8 @@
* S3C - Nand Controller core functions
*/
-#ifndef __ASM_ARCH_NAND_CORE_H
-#define __ASM_ARCH_NAND_CORE_H __FILE__
+#ifndef __ASM_ARCH_NAND_CORE_S3C24XX_H
+#define __ASM_ARCH_NAND_CORE_S3C24XX_H __FILE__
/* These functions are only for use with the core support code, such as
* the cpu specific initialisation code
@@ -21,4 +21,4 @@ static inline void s3c_nand_setname(char *name)
#endif
}
-#endif /* __ASM_ARCH_NAND_CORE_H */
+#endif /* __ASM_ARCH_NAND_CORE_S3C24XX_H */
diff --git a/arch/arm/mach-s3c64xx/onenand-core.h b/arch/arm/mach-s3c/onenand-core-s3c64xx.h
similarity index 82%
rename from arch/arm/mach-s3c64xx/onenand-core.h
rename to arch/arm/mach-s3c/onenand-core-s3c64xx.h
index 0cf6b5e..e2dfdd1 100644
--- a/arch/arm/mach-s3c64xx/onenand-core.h
+++ b/arch/arm/mach-s3c/onenand-core-s3c64xx.h
@@ -7,8 +7,8 @@
* Samsung OneNAD Controller core functions
*/
-#ifndef __ASM_ARCH_ONENAND_CORE_H
-#define __ASM_ARCH_ONENAND_CORE_H __FILE__
+#ifndef __ASM_ARCH_ONENAND_CORE_S3C64XX_H
+#define __ASM_ARCH_ONENAND_CORE_S3C64XX_H __FILE__
/* These functions are only for use with the core support code, such as
* the cpu specific initialisation code
@@ -29,4 +29,4 @@ static inline void s3c64xx_onenand1_setname(char *name)
#endif
}
-#endif /* __ASM_ARCH_ONENAND_CORE_H */
+#endif /* __ASM_ARCH_ONENAND_CORE_S3C64XX_H */
diff --git a/arch/arm/mach-s3c24xx/osiris.h b/arch/arm/mach-s3c/osiris.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/osiris.h
rename to arch/arm/mach-s3c/osiris.h
diff --git a/arch/arm/mach-s3c24xx/otom.h b/arch/arm/mach-s3c/otom.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/otom.h
rename to arch/arm/mach-s3c/otom.h
diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c/pl080.c
similarity index 98%
rename from arch/arm/mach-s3c64xx/pl080.c
rename to arch/arm/mach-s3c/pl080.c
index 152edbe..4730f08 100644
--- a/arch/arm/mach-s3c64xx/pl080.c
+++ b/arch/arm/mach-s3c/pl080.c
@@ -10,11 +10,11 @@
#include <linux/amba/pl08x.h>
#include <linux/of.h>
-#include <plat/cpu.h>
+#include "cpu.h"
#include <mach/irqs.h>
-#include <mach/map.h>
+#include "map.h"
-#include "regs-sys.h"
+#include "regs-sys-s3c64xx.h"
static int pl08x_get_xfer_signal(const struct pl08x_channel_data *cd)
{
diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/mach-s3c/platformdata.c
similarity index 95%
rename from arch/arm/plat-samsung/platformdata.c
rename to arch/arm/mach-s3c/platformdata.c
index cbc3b4b..e643c81 100644
--- a/arch/arm/plat-samsung/platformdata.c
+++ b/arch/arm/mach-s3c/platformdata.c
@@ -9,8 +9,8 @@
#include <linux/string.h>
#include <linux/platform_device.h>
-#include <plat/devs.h>
-#include <plat/sdhci.h>
+#include "devs.h"
+#include "sdhci.h"
void __init *s3c_set_platdata(void *pd, size_t pdsize,
struct platform_device *pdev)
diff --git a/arch/arm/mach-s3c24xx/pll-s3c2410.c b/arch/arm/mach-s3c/pll-s3c2410.c
similarity index 97%
rename from arch/arm/mach-s3c24xx/pll-s3c2410.c
rename to arch/arm/mach-s3c/pll-s3c2410.c
index 0561f79..3fbc99e 100644
--- a/arch/arm/mach-s3c24xx/pll-s3c2410.c
+++ b/arch/arm/mach-s3c/pll-s3c2410.c
@@ -15,8 +15,8 @@
#include <linux/clk.h>
#include <linux/err.h>
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+#include <linux/soc/samsung/s3c-pm.h>
/* This array should be sorted in ascending order of the frequencies */
static struct cpufreq_frequency_table pll_vals_12MHz[] = {
diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c b/arch/arm/mach-s3c/pll-s3c2440-12000000.c
similarity index 97%
rename from arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
rename to arch/arm/mach-s3c/pll-s3c2440-12000000.c
index 2ec3a2f..fdb8e8c 100644
--- a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
+++ b/arch/arm/mach-s3c/pll-s3c2440-12000000.c
@@ -13,8 +13,8 @@
#include <linux/clk.h>
#include <linux/err.h>
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+#include <linux/soc/samsung/s3c-pm.h>
/* This array should be sorted in ascending order of the frequencies */
static struct cpufreq_frequency_table s3c2440_plls_12[] = {
diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c b/arch/arm/mach-s3c/pll-s3c2440-16934400.c
similarity index 98%
rename from arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
rename to arch/arm/mach-s3c/pll-s3c2440-16934400.c
index 4b3d9e36..438b6fc 100644
--- a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
+++ b/arch/arm/mach-s3c/pll-s3c2440-16934400.c
@@ -13,8 +13,8 @@
#include <linux/clk.h>
#include <linux/err.h>
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+#include <linux/soc/samsung/s3c-pm.h>
/* This array should be sorted in ascending order of the frequencies */
static struct cpufreq_frequency_table s3c2440_plls_169344[] = {
diff --git a/arch/arm/plat-samsung/pm-common.c b/arch/arm/mach-s3c/pm-common.c
similarity index 94%
rename from arch/arm/plat-samsung/pm-common.c
rename to arch/arm/mach-s3c/pm-common.c
index 59a10c6d..618bd44 100644
--- a/arch/arm/plat-samsung/pm-common.c
+++ b/arch/arm/mach-s3c/pm-common.c
@@ -12,7 +12,7 @@
#include <linux/io.h>
#include <linux/kernel.h>
-#include <plat/pm-common.h>
+#include "pm-common.h"
/* helper functions to save and restore register state */
@@ -55,6 +55,8 @@ void s3c_pm_do_restore(const struct sleep_save *ptr, int count)
/**
* s3c_pm_do_restore_core() - early restore register values from save list.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
*
* This is similar to s3c_pm_do_restore() except we try and minimise the
* side effects of the function in case registers that hardware might need
diff --git a/arch/arm/mach-s3c/pm-common.h b/arch/arm/mach-s3c/pm-common.h
new file mode 100644
index 0000000..18b9607
--- /dev/null
+++ b/arch/arm/mach-s3c/pm-common.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Tomasz Figa <t.figa@samsung.com>
+ * Copyright (c) 2004 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Written by Ben Dooks, <ben@simtec.co.uk>
+ */
+
+#ifndef __PLAT_SAMSUNG_PM_COMMON_H
+#define __PLAT_SAMSUNG_PM_COMMON_H __FILE__
+
+#include <linux/irq.h>
+#include <linux/soc/samsung/s3c-pm.h>
+
+/* sleep save info */
+
+/**
+ * struct sleep_save - save information for shared peripherals.
+ * @reg: Pointer to the register to save.
+ * @val: Holder for the value saved from reg.
+ *
+ * This describes a list of registers which is used by the pm core and
+ * other subsystem to save and restore register values over suspend.
+ */
+struct sleep_save {
+ void __iomem *reg;
+ unsigned long val;
+};
+
+#define SAVE_ITEM(x) \
+ { .reg = (x) }
+
+/* helper functions to save/restore lists of registers. */
+
+extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
+extern void s3c_pm_do_restore(const struct sleep_save *ptr, int count);
+extern void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count);
+
+#endif
diff --git a/arch/arm/mach-s3c24xx/include/mach/pm-core.h b/arch/arm/mach-s3c/pm-core-s3c24xx.h
similarity index 94%
rename from arch/arm/mach-s3c24xx/include/mach/pm-core.h
rename to arch/arm/mach-s3c/pm-core-s3c24xx.h
index 5e4ce89..bcb7978 100644
--- a/arch/arm/mach-s3c24xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c/pm-core-s3c24xx.h
@@ -11,10 +11,12 @@
#include <linux/io.h>
#include "regs-clock.h"
-#include "regs-irq.h"
+#include "regs-irq-s3c24xx.h"
+#include <mach/irqs.h>
static inline void s3c_pm_debug_init_uart(void)
{
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
unsigned long tmp = __raw_readl(S3C2410_CLKCON);
/* re-start uart clocks */
@@ -24,6 +26,7 @@ static inline void s3c_pm_debug_init_uart(void)
__raw_writel(tmp, S3C2410_CLKCON);
udelay(10);
+#endif
}
static inline void s3c_pm_arch_prepare_irqs(void)
@@ -75,11 +78,6 @@ static inline void s3c_pm_arch_show_resume_irqs(void)
s3c_irqwake_eintmask);
}
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
- struct pm_uart_save *save)
-{
-}
-
static inline void s3c_pm_restored_gpios(void) { }
static inline void samsung_pm_saved_gpios(void) { }
diff --git a/arch/arm/mach-s3c/pm-core-s3c64xx.h b/arch/arm/mach-s3c/pm-core-s3c64xx.h
new file mode 100644
index 0000000..06f564e5
--- /dev/null
+++ b/arch/arm/mach-s3c/pm-core-s3c64xx.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
+ */
+
+#ifndef __MACH_S3C64XX_PM_CORE_H
+#define __MACH_S3C64XX_PM_CORE_H __FILE__
+
+#include <linux/serial_s3c.h>
+#include <linux/delay.h>
+
+#include "regs-gpio.h"
+#include "regs-clock.h"
+#include "map.h"
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+ u32 tmp = __raw_readl(S3C_PCLK_GATE);
+
+ /* As a note, since the S3C64XX UARTs generally have multiple
+ * clock sources, we simply enable PCLK at the moment and hope
+ * that the resume settings for the UART are suitable for the
+ * use with PCLK.
+ */
+
+ tmp |= S3C_CLKCON_PCLK_UART0;
+ tmp |= S3C_CLKCON_PCLK_UART1;
+ tmp |= S3C_CLKCON_PCLK_UART2;
+ tmp |= S3C_CLKCON_PCLK_UART3;
+
+ __raw_writel(tmp, S3C_PCLK_GATE);
+ udelay(10);
+#endif
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+ /* VIC should have already been taken care of */
+
+ /* clear any pending EINT0 interrupts */
+ __raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+}
+
+/* make these defines, we currently do not have any need to change
+ * the IRQ wake controls depending on the CPU we are running on */
+#ifdef CONFIG_PM_SLEEP
+#define s3c_irqwake_eintallow ((1 << 28) - 1)
+#define s3c_irqwake_intallow (~0)
+#else
+#define s3c_irqwake_eintallow 0
+#define s3c_irqwake_intallow 0
+#endif
+
+static inline void s3c_pm_restored_gpios(void)
+{
+ /* ensure sleep mode has been cleared from the system */
+
+ __raw_writel(0, S3C64XX_SLPEN);
+}
+
+static inline void samsung_pm_saved_gpios(void)
+{
+ /* turn on the sleep mode and keep it there, as it seems that during
+ * suspend the xCON registers get re-set and thus you can end up with
+ * problems between going to sleep and resuming.
+ */
+
+ __raw_writel(S3C64XX_SLPEN_USE_xSLP, S3C64XX_SLPEN);
+}
+#endif /* __MACH_S3C64XX_PM_CORE_H */
diff --git a/arch/arm/mach-s3c/pm-core.h b/arch/arm/mach-s3c/pm-core.h
new file mode 100644
index 0000000..b0e1d27
--- /dev/null
+++ b/arch/arm/mach-s3c/pm-core.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "pm-core-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "pm-core-s3c64xx.h"
+#endif
diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/mach-s3c/pm-gpio.c
similarity index 98%
rename from arch/arm/plat-samsung/pm-gpio.c
rename to arch/arm/mach-s3c/pm-gpio.c
index cb2e3bc..cfdbc23 100644
--- a/arch/arm/plat-samsung/pm-gpio.c
+++ b/arch/arm/mach-s3c/pm-gpio.c
@@ -13,10 +13,10 @@
#include <linux/io.h>
#include <linux/gpio.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
-#include <plat/gpio-core.h>
-#include <plat/pm.h>
+#include "gpio-core.h"
+#include "pm.h"
/* PM GPIO helpers */
diff --git a/arch/arm/mach-s3c24xx/pm-h1940.S b/arch/arm/mach-s3c/pm-h1940.S
similarity index 80%
rename from arch/arm/mach-s3c24xx/pm-h1940.S
rename to arch/arm/mach-s3c/pm-h1940.S
index a7bbe33..3bf6685 100644
--- a/arch/arm/mach-s3c24xx/pm-h1940.S
+++ b/arch/arm/mach-s3c/pm-h1940.S
@@ -7,10 +7,9 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
+#include "map.h"
-#include <mach/regs-gpio.h>
+#include "regs-gpio.h"
.text
.global h1940_pm_return
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2410.c b/arch/arm/mach-s3c/pm-s3c2410.c
similarity index 95%
rename from arch/arm/mach-s3c24xx/pm-s3c2410.c
rename to arch/arm/mach-s3c/pm-s3c2410.c
index 2d8ea70..a664198 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2410.c
+++ b/arch/arm/mach-s3c/pm-s3c2410.c
@@ -16,13 +16,12 @@
#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include <plat/gpio-cfg.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "gpio-cfg.h"
+#include "cpu.h"
+#include "pm.h"
#include "h1940.h"
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c/pm-s3c2412.c
similarity index 94%
rename from arch/arm/mach-s3c24xx/pm-s3c2412.c
rename to arch/arm/mach-s3c/pm-s3c2412.c
index 2dfdaab..6a96044 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2412.c
+++ b/arch/arm/mach-s3c/pm-s3c2412.c
@@ -19,14 +19,14 @@
#include <asm/cacheflush.h>
#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
+#include <mach/irqs.h>
+#include "regs-gpio.h"
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/wakeup-mask.h>
+#include "cpu.h"
+#include "pm.h"
+#include "wakeup-mask.h"
-#include "regs-dsc.h"
+#include "regs-dsc-s3c24xx.h"
#include "s3c2412-power.h"
extern void s3c2412_sleep_enter(void);
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2416.c b/arch/arm/mach-s3c/pm-s3c2416.c
similarity index 95%
rename from arch/arm/mach-s3c24xx/pm-s3c2416.c
rename to arch/arm/mach-s3c/pm-s3c2416.c
index 9a2f05e..f69ad84 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2416.c
+++ b/arch/arm/mach-s3c/pm-s3c2416.c
@@ -11,10 +11,10 @@
#include <asm/cacheflush.h>
-#include <mach/regs-s3c2443-clock.h>
+#include "regs-s3c2443-clock.h"
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "cpu.h"
+#include "pm.h"
#include "s3c2412-power.h"
diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c/pm-s3c24xx.c
similarity index 92%
rename from arch/arm/mach-s3c24xx/pm.c
rename to arch/arm/mach-s3c/pm-s3c24xx.c
index c64988c..3a8f5c3 100644
--- a/arch/arm/mach-s3c24xx/pm.c
+++ b/arch/arm/mach-s3c/pm-s3c24xx.c
@@ -21,17 +21,17 @@
#include <linux/serial_s3c.h>
#include <linux/io.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-irq.h>
-#include <mach/gpio-samsung.h>
+#include "regs-clock.h"
+#include "regs-gpio.h"
+#include "regs-irq.h"
+#include "gpio-samsung.h"
#include <asm/mach/time.h>
-#include <plat/gpio-cfg.h>
-#include <plat/pm.h>
+#include "gpio-cfg.h"
+#include "pm.h"
-#include "regs-mem.h"
+#include "regs-mem-s3c24xx.h"
#define PFX "s3c24xx-pm: "
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c/pm-s3c64xx.c
similarity index 81%
rename from arch/arm/mach-s3c64xx/pm.c
rename to arch/arm/mach-s3c/pm-s3c64xx.c
index fd6dbb2..4f17781 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c/pm-s3c64xx.c
@@ -14,22 +14,22 @@
#include <linux/gpio.h>
#include <linux/pm_domain.h>
-#include <mach/map.h>
+#include "map.h"
#include <mach/irqs.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/wakeup-mask.h>
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
+#include "wakeup-mask.h"
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "regs-clock.h"
+#include "gpio-samsung.h"
-#include "regs-gpio-memport.h"
-#include "regs-modem.h"
-#include "regs-sys.h"
-#include "regs-syscon-power.h"
+#include "regs-gpio-memport-s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+#include "regs-sys-s3c64xx.h"
+#include "regs-syscon-power-s3c64xx.h"
struct s3c64xx_pm_domain {
char *const name;
@@ -305,6 +305,56 @@ static void s3c64xx_pm_prepare(void)
__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
}
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
+{
+ u32 ucon;
+ u32 ucon_clk
+ u32 save_clk;
+ u32 new_ucon;
+ u32 delta;
+
+ if (!soc_is_s3c64xx())
+ return;
+
+ ucon = __raw_readl(regs + S3C2410_UCON);
+ ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+ sav_clk = save->ucon & S3C6400_UCON_CLKMASK;
+
+ /* S3C64XX UART blocks only support level interrupts, so ensure that
+ * when we restore unused UART blocks we force the level interrupt
+ * settigs. */
+ save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+ /* We have a constraint on changing the clock type of the UART
+ * between UCLKx and PCLK, so ensure that when we restore UCON
+ * that the CLK field is correctly modified if the bootloader
+ * has changed anything.
+ */
+ if (ucon_clk != save_clk) {
+ new_ucon = save->ucon;
+ delta = ucon_clk ^ save_clk;
+
+ /* change from UCLKx => wrong PCLK,
+ * either UCLK can be tested for by a bit-test
+ * with UCLK0 */
+ if (ucon_clk & S3C6400_UCON_UCLK0 &&
+ !(save_clk & S3C6400_UCON_UCLK0) &&
+ delta & S3C6400_UCON_PCLK2) {
+ new_ucon &= ~S3C6400_UCON_UCLK0;
+ } else if (delta == S3C6400_UCON_PCLK2) {
+ /* as an precaution, don't change from
+ * PCLK2 => PCLK or vice-versa */
+ new_ucon ^= S3C6400_UCON_PCLK2;
+ }
+
+ S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+ ucon, new_ucon, save->ucon);
+ save->ucon = new_ucon;
+ }
+}
+#endif
+
int __init s3c64xx_pm_init(void)
{
int i;
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/mach-s3c/pm.c
similarity index 93%
rename from arch/arm/plat-samsung/pm.c
rename to arch/arm/mach-s3c/pm.c
index d6bfd66..c563bb9 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/mach-s3c/pm.c
@@ -18,15 +18,16 @@
#include <asm/cacheflush.h>
#include <asm/suspend.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-irq.h>
+#include "map.h"
+#include "regs-clock.h"
+#include "regs-irq.h"
#include <mach/irqs.h>
#include <asm/irq.h>
-#include <plat/pm.h>
-#include <mach/pm-core.h>
+#include "cpu.h"
+#include "pm.h"
+#include "pm-core.h"
/* for external use */
@@ -70,8 +71,7 @@ static int s3c_pm_enter(suspend_state_t state)
{
int ret;
/* ensure the debug is initialised (if enabled) */
-
- s3c_pm_debug_init();
+ s3c_pm_debug_init_uart();
S3C_PMDBG("%s(%d)\n", __func__, state);
@@ -100,7 +100,7 @@ static int s3c_pm_enter(suspend_state_t state)
samsung_pm_saved_gpios();
}
- s3c_pm_save_uarts();
+ s3c_pm_save_uarts(soc_is_s3c2410());
s3c_pm_save_core();
/* set the irq configuration for wake */
@@ -137,14 +137,14 @@ static int s3c_pm_enter(suspend_state_t state)
/* restore the system state */
s3c_pm_restore_core();
- s3c_pm_restore_uarts();
+ s3c_pm_restore_uarts(soc_is_s3c2410());
if (!of_have_populated_dt()) {
samsung_pm_restore_gpios();
s3c_pm_restored_gpios();
}
- s3c_pm_debug_init();
+ s3c_pm_debug_init_uart();
/* check what irq (if any) restored the system */
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/mach-s3c/pm.h
similarity index 98%
rename from arch/arm/plat-samsung/include/plat/pm.h
rename to arch/arm/mach-s3c/pm.h
index 2746137..eed61e5 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/mach-s3c/pm.h
@@ -11,7 +11,7 @@
* management
*/
-#include <plat/pm-common.h>
+#include "pm-common.h"
struct device;
diff --git a/arch/arm/plat-samsung/include/plat/pwm-core.h b/arch/arm/mach-s3c/pwm-core.h
similarity index 100%
rename from arch/arm/plat-samsung/include/plat/pwm-core.h
rename to arch/arm/mach-s3c/pwm-core.h
diff --git a/arch/arm/plat-samsung/include/plat/regs-adc.h b/arch/arm/mach-s3c/regs-adc.h
similarity index 100%
rename from arch/arm/plat-samsung/include/plat/regs-adc.h
rename to arch/arm/mach-s3c/regs-adc.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h b/arch/arm/mach-s3c/regs-clock-s3c24xx.h
similarity index 98%
rename from arch/arm/mach-s3c24xx/include/mach/regs-clock.h
rename to arch/arm/mach-s3c/regs-clock-s3c24xx.h
index 7ca3dd4..933ddb5 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c/regs-clock-s3c24xx.h
@@ -9,6 +9,8 @@
#ifndef __ASM_ARM_REGS_CLOCK
#define __ASM_ARM_REGS_CLOCK
+#include "map.h"
+
#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s)))
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c/regs-clock-s3c64xx.h
similarity index 100%
rename from arch/arm/mach-s3c64xx/include/mach/regs-clock.h
rename to arch/arm/mach-s3c/regs-clock-s3c64xx.h
diff --git a/arch/arm/mach-s3c/regs-clock.h b/arch/arm/mach-s3c/regs-clock.h
new file mode 100644
index 0000000..7df31f2
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-clock.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "regs-clock-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "regs-clock-s3c64xx.h"
+#endif
diff --git a/arch/arm/mach-s3c24xx/regs-dsc.h b/arch/arm/mach-s3c/regs-dsc-s3c24xx.h
similarity index 76%
rename from arch/arm/mach-s3c24xx/regs-dsc.h
rename to arch/arm/mach-s3c/regs-dsc-s3c24xx.h
index b500636..8b8b572 100644
--- a/arch/arm/mach-s3c24xx/regs-dsc.h
+++ b/arch/arm/mach-s3c/regs-dsc-s3c24xx.h
@@ -7,8 +7,8 @@
*/
-#ifndef __ASM_ARCH_REGS_DSC_H
-#define __ASM_ARCH_REGS_DSC_H __FILE__
+#ifndef __ASM_ARCH_REGS_DSC_S3C24XX_H
+#define __ASM_ARCH_REGS_DSC_S3C24XX_H __FILE__
/* S3C2412 */
#define S3C2412_DSC0 S3C2410_GPIOREG(0xdc)
@@ -18,5 +18,5 @@
#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4)
#define S3C2440_DSC1 S3C2410_GPIOREG(0xc8)
-#endif /* __ASM_ARCH_REGS_DSC_H */
+#endif /* __ASM_ARCH_REGS_DSC_S3C24XX_H */
diff --git a/arch/arm/mach-s3c64xx/regs-gpio-memport.h b/arch/arm/mach-s3c/regs-gpio-memport-s3c64xx.h
similarity index 100%
rename from arch/arm/mach-s3c64xx/regs-gpio-memport.h
rename to arch/arm/mach-s3c/regs-gpio-memport-s3c64xx.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c/regs-gpio-s3c24xx.h
similarity index 99%
rename from arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
rename to arch/arm/mach-s3c/regs-gpio-s3c24xx.h
index 594e967..9a7e262 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c/regs-gpio-s3c24xx.h
@@ -10,6 +10,8 @@
#ifndef __ASM_ARCH_REGS_GPIO_H
#define __ASM_ARCH_REGS_GPIO_H
+#include "map-s3c.h"
+
#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80)
/* general configuration options */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c/regs-gpio-s3c64xx.h
similarity index 100%
rename from arch/arm/mach-s3c64xx/include/mach/regs-gpio.h
rename to arch/arm/mach-s3c/regs-gpio-s3c64xx.h
diff --git a/arch/arm/mach-s3c/regs-gpio.h b/arch/arm/mach-s3c/regs-gpio.h
new file mode 100644
index 0000000..0d41cb7
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-gpio.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "regs-gpio-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "regs-gpio-s3c64xx.h"
+#endif
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-irq.h b/arch/arm/mach-s3c/regs-irq-s3c24xx.h
similarity index 97%
rename from arch/arm/mach-s3c24xx/include/mach/regs-irq.h
rename to arch/arm/mach-s3c/regs-irq-s3c24xx.h
index 8d8e669..c0b97b2 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-irq.h
+++ b/arch/arm/mach-s3c/regs-irq-s3c24xx.h
@@ -8,6 +8,8 @@
#ifndef ___ASM_ARCH_REGS_IRQ_H
#define ___ASM_ARCH_REGS_IRQ_H
+#include "map-s3c.h"
+
/* interrupt controller */
#define S3C2410_IRQREG(x) ((x) + S3C24XX_VA_IRQ)
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-irq.h b/arch/arm/mach-s3c/regs-irq-s3c64xx.h
similarity index 100%
rename from arch/arm/mach-s3c64xx/include/mach/regs-irq.h
rename to arch/arm/mach-s3c/regs-irq-s3c64xx.h
diff --git a/arch/arm/mach-s3c/regs-irq.h b/arch/arm/mach-s3c/regs-irq.h
new file mode 100644
index 0000000..57f0dda
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-irq.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "regs-irq-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "regs-irq-s3c64xx.h"
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/regs-irqtype.h b/arch/arm/mach-s3c/regs-irqtype.h
similarity index 100%
rename from arch/arm/plat-samsung/include/plat/regs-irqtype.h
rename to arch/arm/mach-s3c/regs-irqtype.h
diff --git a/arch/arm/mach-s3c24xx/regs-mem.h b/arch/arm/mach-s3c/regs-mem-s3c24xx.h
similarity index 97%
rename from arch/arm/mach-s3c24xx/regs-mem.h
rename to arch/arm/mach-s3c/regs-mem-s3c24xx.h
index 2f3bc48..8fed34a 100644
--- a/arch/arm/mach-s3c24xx/regs-mem.h
+++ b/arch/arm/mach-s3c/regs-mem-s3c24xx.h
@@ -9,6 +9,8 @@
#ifndef __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H
#define __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H __FILE__
+#include "map-s3c.h"
+
#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
#define S3C2410_BWSCON S3C2410_MEMREG(0x00)
diff --git a/arch/arm/mach-s3c64xx/regs-modem.h b/arch/arm/mach-s3c/regs-modem-s3c64xx.h
similarity index 100%
rename from arch/arm/mach-s3c64xx/regs-modem.h
rename to arch/arm/mach-s3c/regs-modem-s3c64xx.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c/regs-s3c2443-clock.h
similarity index 81%
rename from arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
rename to arch/arm/mach-s3c/regs-s3c2443-clock.h
index 6bf9246..b3b670d 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c/regs-s3c2443-clock.h
@@ -10,6 +10,9 @@
#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
#define __ASM_ARM_REGS_S3C2443_CLOCK
+#include <linux/delay.h>
+#include "map-s3c.h"
+
#define S3C2443_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
#define S3C2443_PLLCON_MDIVSHIFT 16
@@ -184,5 +187,52 @@ s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
return (unsigned int)fvco;
}
+static inline void s3c_hsudc_init_phy(void)
+{
+ u32 cfg;
+
+ cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY;
+ writel(cfg, S3C2443_PWRCFG);
+
+ cfg = readl(S3C2443_URSTCON);
+ cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
+ writel(cfg, S3C2443_URSTCON);
+ mdelay(1);
+
+ cfg = readl(S3C2443_URSTCON);
+ cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
+ writel(cfg, S3C2443_URSTCON);
+
+ cfg = readl(S3C2443_PHYCTRL);
+ cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT);
+ cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL);
+ writel(cfg, S3C2443_PHYCTRL);
+
+ cfg = readl(S3C2443_PHYPWR);
+ cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN |
+ S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK |
+ S3C2443_PHYPWR_ANALOG_PD);
+ cfg |= S3C2443_PHYPWR_COMMON_ON;
+ writel(cfg, S3C2443_PHYPWR);
+
+ cfg = readl(S3C2443_UCLKCON);
+ cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN |
+ S3C2443_UCLKCON_TCLKEN);
+ writel(cfg, S3C2443_UCLKCON);
+}
+
+static inline void s3c_hsudc_uninit_phy(void)
+{
+ u32 cfg;
+
+ cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY;
+ writel(cfg, S3C2443_PWRCFG);
+
+ writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR);
+
+ cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN;
+ writel(cfg, S3C2443_UCLKCON);
+}
+
#endif /* __ASM_ARM_REGS_S3C2443_CLOCK */
diff --git a/arch/arm/mach-s3c64xx/regs-srom.h b/arch/arm/mach-s3c/regs-srom-s3c64xx.h
similarity index 100%
rename from arch/arm/mach-s3c64xx/regs-srom.h
rename to arch/arm/mach-s3c/regs-srom-s3c64xx.h
diff --git a/arch/arm/mach-s3c64xx/regs-sys.h b/arch/arm/mach-s3c/regs-sys-s3c64xx.h
similarity index 100%
rename from arch/arm/mach-s3c64xx/regs-sys.h
rename to arch/arm/mach-s3c/regs-sys-s3c64xx.h
diff --git a/arch/arm/mach-s3c64xx/regs-syscon-power.h b/arch/arm/mach-s3c/regs-syscon-power-s3c64xx.h
similarity index 100%
rename from arch/arm/mach-s3c64xx/regs-syscon-power.h
rename to arch/arm/mach-s3c/regs-syscon-power-s3c64xx.h
diff --git a/arch/arm/mach-s3c64xx/regs-usb-hsotg-phy.h b/arch/arm/mach-s3c/regs-usb-hsotg-phy-s3c64xx.h
similarity index 100%
rename from arch/arm/mach-s3c64xx/regs-usb-hsotg-phy.h
rename to arch/arm/mach-s3c/regs-usb-hsotg-phy-s3c64xx.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/rtc-core.h b/arch/arm/mach-s3c/rtc-core-s3c24xx.h
similarity index 80%
rename from arch/arm/mach-s3c24xx/include/mach/rtc-core.h
rename to arch/arm/mach-s3c/rtc-core-s3c24xx.h
index 8851033..e7258b2 100644
--- a/arch/arm/mach-s3c24xx/include/mach/rtc-core.h
+++ b/arch/arm/mach-s3c/rtc-core-s3c24xx.h
@@ -5,8 +5,8 @@
* Samsung RTC Controller core functions
*/
-#ifndef __RTC_CORE_H
-#define __RTC_CORE_H __FILE__
+#ifndef __RTC_CORE_S3C24XX_H
+#define __RTC_CORE_S3C24XX_H __FILE__
/* These functions are only for use with the core support code, such as
* the cpu specific initialisation code
@@ -20,4 +20,4 @@ static inline void s3c_rtc_setname(char *name)
s3c_device_rtc.name = name;
}
-#endif /* __RTC_CORE_H */
+#endif /* __RTC_CORE_S3C24XX_H */
diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c/s3c2410.c
similarity index 88%
rename from arch/arm/mach-s3c24xx/s3c2410.c
rename to arch/arm/mach-s3c/s3c2410.c
index 21fd540..4d39d99 100644
--- a/arch/arm/mach-s3c24xx/s3c2410.c
+++ b/arch/arm/mach-s3c/s3c2410.c
@@ -25,28 +25,27 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "gpio-samsung.h"
#include <asm/irq.h>
#include <asm/system_misc.h>
-#include <plat/cpu-freq.h>
-#include <mach/regs-clock.h>
+#include "regs-clock.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
-#include "common.h"
+#include "s3c24xx.h"
/* Initial IO mappings */
-static struct map_desc s3c2410_iodesc[] __initdata = {
+static struct map_desc s3c2410_iodesc[] __initdata __maybe_unused = {
IODESC_ENT(CLKPWR),
IODESC_ENT(TIMER),
IODESC_ENT(WATCHDOG),
diff --git a/arch/arm/mach-s3c24xx/s3c2412-power.h b/arch/arm/mach-s3c/s3c2412-power.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/s3c2412-power.h
rename to arch/arm/mach-s3c/s3c2412-power.h
diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c/s3c2412.c
similarity index 91%
rename from arch/arm/mach-s3c24xx/s3c2412.c
rename to arch/arm/mach-s3c/s3c2412.c
index 8fe4d46..0b1ca78 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.c
+++ b/arch/arm/mach-s3c/s3c2412.c
@@ -29,19 +29,17 @@
#include <asm/irq.h>
#include <asm/system_misc.h>
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
+#include "map.h"
+#include "regs-clock.h"
+#include "regs-gpio.h"
-#include <plat/cpu.h>
-#include <plat/cpu-freq.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/regs-spi.h>
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
-#include "common.h"
-#include "nand-core.h"
-#include "regs-dsc.h"
+#include "s3c24xx.h"
+#include "nand-core-s3c24xx.h"
+#include "regs-dsc-s3c24xx.h"
#include "s3c2412-power.h"
#ifndef CONFIG_CPU_S3C2412_ONLY
@@ -57,7 +55,7 @@ static inline void s3c2412_init_gpio2(void)
/* Initial IO mappings */
-static struct map_desc s3c2412_iodesc[] __initdata = {
+static struct map_desc s3c2412_iodesc[] __initdata __maybe_unused = {
IODESC_ENT(CLKPWR),
IODESC_ENT(TIMER),
IODESC_ENT(WATCHDOG),
diff --git a/arch/arm/mach-s3c24xx/include/mach/s3c2412.h b/arch/arm/mach-s3c/s3c2412.h
similarity index 96%
rename from arch/arm/mach-s3c24xx/include/mach/s3c2412.h
rename to arch/arm/mach-s3c/s3c2412.h
index 4ff83f9..ed09a0e 100644
--- a/arch/arm/mach-s3c24xx/include/mach/s3c2412.h
+++ b/arch/arm/mach-s3c/s3c2412.h
@@ -8,6 +8,8 @@
#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H
#define __ARCH_ARM_MACH_S3C24XX_S3C2412_H __FILE__
+#include "map-s3c.h"
+
#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c/s3c2416.c
similarity index 84%
rename from arch/arm/mach-s3c24xx/s3c2416.c
rename to arch/arm/mach-s3c/s3c2416.c
index 9514196..126e6ed 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c/s3c2416.c
@@ -26,32 +26,32 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "gpio-samsung.h"
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/system_misc.h>
-#include <mach/regs-s3c2443-clock.h>
-#include <mach/rtc-core.h>
+#include "regs-s3c2443-clock.h"
+#include "rtc-core-s3c24xx.h"
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/sdhci.h>
-#include <plat/pm.h>
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+#include "devs.h"
+#include "cpu.h"
+#include "sdhci.h"
+#include "pm.h"
-#include <plat/iic-core.h>
-#include <plat/adc-core.h>
+#include "iic-core.h"
+#include "adc-core.h"
-#include "common.h"
-#include "fb-core.h"
-#include "nand-core.h"
-#include "spi-core.h"
+#include "s3c24xx.h"
+#include "fb-core-s3c24xx.h"
+#include "nand-core-s3c24xx.h"
+#include "spi-core-s3c24xx.h"
-static struct map_desc s3c2416_iodesc[] __initdata = {
+static struct map_desc s3c2416_iodesc[] __initdata __maybe_unused = {
IODESC_ENT(WATCHDOG),
IODESC_ENT(CLKPWR),
IODESC_ENT(TIMER),
diff --git a/arch/arm/mach-s3c24xx/s3c2440.c b/arch/arm/mach-s3c/s3c2440.c
similarity index 85%
rename from arch/arm/mach-s3c24xx/s3c2440.c
rename to arch/arm/mach-s3c/s3c2440.c
index 451d985..c6cdee4 100644
--- a/arch/arm/mach-s3c24xx/s3c2440.c
+++ b/arch/arm/mach-s3c/s3c2440.c
@@ -23,19 +23,18 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/gpio-samsung.h>
#include <asm/irq.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "devs.h"
+#include "cpu.h"
+#include "pm.h"
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+#include "gpio-samsung.h"
-#include "common.h"
+#include "s3c24xx.h"
static struct device s3c2440_dev = {
.bus = &s3c2440_subsys,
diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c/s3c2442.c
similarity index 82%
rename from arch/arm/mach-s3c24xx/s3c2442.c
rename to arch/arm/mach-s3c/s3c2442.c
index 432d683..0c0e30b 100644
--- a/arch/arm/mach-s3c24xx/s3c2442.c
+++ b/arch/arm/mach-s3c/s3c2442.c
@@ -21,21 +21,20 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/gpio-samsung.h>
#include <linux/atomic.h>
#include <asm/irq.h>
-#include <mach/regs-clock.h>
+#include "regs-clock.h"
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "cpu.h"
+#include "pm.h"
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+#include "gpio-samsung.h"
-#include "common.h"
+#include "s3c24xx.h"
static struct device s3c2442_dev = {
.bus = &s3c2442_subsys,
diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c/s3c2443.c
similarity index 83%
rename from arch/arm/mach-s3c24xx/s3c2443.c
rename to arch/arm/mach-s3c/s3c2443.c
index 4cbeb74..08f9101 100644
--- a/arch/arm/mach-s3c24xx/s3c2443.c
+++ b/arch/arm/mach-s3c/s3c2443.c
@@ -23,26 +23,28 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "gpio-samsung.h"
+#include <mach/irqs.h>
#include <asm/irq.h>
#include <asm/system_misc.h>
-#include <mach/regs-s3c2443-clock.h>
-#include <mach/rtc-core.h>
+#include "regs-s3c2443-clock.h"
+#include "rtc-core-s3c24xx.h"
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/adc-core.h>
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+#include "devs.h"
+#include "cpu.h"
+#include "adc-core.h"
-#include "fb-core.h"
-#include "nand-core.h"
-#include "spi-core.h"
+#include "s3c24xx.h"
+#include "fb-core-s3c24xx.h"
+#include "nand-core-s3c24xx.h"
+#include "spi-core-s3c24xx.h"
-static struct map_desc s3c2443_iodesc[] __initdata = {
+static struct map_desc s3c2443_iodesc[] __initdata __maybe_unused = {
IODESC_ENT(WATCHDOG),
IODESC_ENT(CLKPWR),
IODESC_ENT(TIMER),
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c/s3c244x.c
similarity index 89%
rename from arch/arm/mach-s3c24xx/s3c244x.c
rename to arch/arm/mach-s3c/s3c244x.c
index a75f588..95df349 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c/s3c244x.c
@@ -25,23 +25,21 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
+#include "map.h"
#include <asm/irq.h>
-#include <plat/cpu-freq.h>
+#include "regs-clock.h"
+#include "regs-gpio.h"
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
+#include "devs.h"
+#include "cpu.h"
+#include "pm.h"
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "s3c24xx.h"
+#include "nand-core-s3c24xx.h"
+#include "regs-dsc-s3c24xx.h"
-#include "common.h"
-#include "nand-core.h"
-#include "regs-dsc.h"
-
-static struct map_desc s3c244x_iodesc[] __initdata = {
+static struct map_desc s3c244x_iodesc[] __initdata __maybe_unused = {
IODESC_ENT(CLKPWR),
IODESC_ENT(TIMER),
IODESC_ENT(WATCHDOG),
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c/s3c24xx.c
similarity index 96%
rename from arch/arm/mach-s3c24xx/common.c
rename to arch/arm/mach-s3c/s3c24xx.c
index 3dc029c..ccfed48 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c/s3c24xx.c
@@ -17,11 +17,14 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-s3c2410.h>
#include <linux/platform_data/dma-s3c24xx.h>
#include <linux/dmaengine.h>
+#include <linux/clk/samsung.h>
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
+#include "hardware-s3c24xx.h"
+#include "map.h"
+#include "regs-clock.h"
#include <asm/irq.h>
#include <asm/cacheflush.h>
#include <asm/system_info.h>
@@ -30,15 +33,14 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/dma.h>
+#include "regs-gpio.h"
+#include "dma-s3c24xx.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/cpu-freq.h>
-#include <plat/pwm-core.h>
+#include "cpu.h"
+#include "devs.h"
+#include "pwm-core.h"
-#include "common.h"
+#include "s3c24xx.h"
/* table of supported CPUs */
@@ -137,7 +139,7 @@ static struct cpu_table cpu_ids[] __initdata = {
/* minimal IO mapping */
-static struct map_desc s3c_iodesc[] __initdata = {
+static struct map_desc s3c_iodesc[] __initdata __maybe_unused = {
IODESC_ENT(GPIO),
IODESC_ENT(IRQ),
IODESC_ENT(MEMCTRL),
@@ -220,13 +222,13 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
samsung_pwm_set_platdata(&s3c24xx_pwm_variant);
}
-void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+void __init s3c24xx_set_timer_source(unsigned int event, unsigned int source)
{
s3c24xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
s3c24xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
}
-void __init samsung_timer_init(void)
+void __init s3c24xx_timer_init(void)
{
unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
IRQ_TIMER0, IRQ_TIMER1, IRQ_TIMER2, IRQ_TIMER3, IRQ_TIMER4,
@@ -662,10 +664,17 @@ static struct resource s3c2410_dclk_resource[] = {
[0] = DEFINE_RES_MEM(0x56000084, 0x4),
};
+static struct s3c2410_clk_platform_data s3c_clk_platform_data = {
+ .modify_misccr = s3c2410_modify_misccr,
+};
+
struct platform_device s3c2410_device_dclk = {
.name = "s3c2410-dclk",
.id = 0,
.num_resources = ARRAY_SIZE(s3c2410_dclk_resource),
.resource = s3c2410_dclk_resource,
+ .dev = {
+ .platform_data = &s3c_clk_platform_data,
+ },
};
#endif
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c/s3c24xx.h
similarity index 84%
rename from arch/arm/mach-s3c24xx/common.h
rename to arch/arm/mach-s3c/s3c24xx.h
index d087b20..5848bef 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c/s3c24xx.h
@@ -10,6 +10,7 @@
#define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__
#include <linux/reboot.h>
+#include <mach/irqs.h>
struct s3c2410_uartcfg;
@@ -108,19 +109,16 @@ extern struct platform_device s3c2443_device_dma;
extern struct platform_device s3c2410_device_dclk;
-#ifdef CONFIG_S3C2410_COMMON_CLK
-void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
- int current_soc,
- void __iomem *reg_base);
-#endif
-#ifdef CONFIG_S3C2412_COMMON_CLK
-void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
- unsigned long ext_f, void __iomem *reg_base);
-#endif
-#ifdef CONFIG_S3C2443_COMMON_CLK
-void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
- int current_soc,
- void __iomem *reg_base);
-#endif
+enum s3c24xx_timer_mode {
+ S3C24XX_PWM0,
+ S3C24XX_PWM1,
+ S3C24XX_PWM2,
+ S3C24XX_PWM3,
+ S3C24XX_PWM4,
+};
+
+extern void __init s3c24xx_set_timer_source(enum s3c24xx_timer_mode event,
+ enum s3c24xx_timer_mode source);
+extern void __init s3c24xx_timer_init(void);
#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c/s3c6400.c
similarity index 88%
rename from arch/arm/mach-s3c64xx/s3c6400.c
rename to arch/arm/mach-s3c/s3c6400.c
index 545eea7..802f4fb 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c/s3c6400.c
@@ -26,19 +26,17 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
-#include <plat/cpu-freq.h>
-#include <mach/regs-clock.h>
+#include "regs-clock.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-#include <plat/iic-core.h>
+#include "cpu.h"
+#include "devs.h"
+#include "sdhci.h"
+#include "iic-core.h"
-#include "common.h"
-#include "onenand-core.h"
+#include "s3c64xx.h"
+#include "onenand-core-s3c64xx.h"
void __init s3c6400_map_io(void)
{
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c/s3c6410.c
similarity index 86%
rename from arch/arm/mach-s3c64xx/s3c6410.c
rename to arch/arm/mach-s3c/s3c6410.c
index 47e04e0..dae17d5 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c/s3c6410.c
@@ -27,21 +27,20 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
-#include <plat/cpu-freq.h>
-#include <mach/regs-clock.h>
+#include <linux/soc/samsung/s3c-pm.h>
+#include "regs-clock.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-#include <plat/adc-core.h>
-#include <plat/iic-core.h>
+#include "cpu.h"
+#include "devs.h"
+#include "sdhci.h"
+#include "adc-core.h"
+#include "iic-core.h"
-#include "ata-core.h"
-#include "common.h"
-#include "onenand-core.h"
+#include "ata-core-s3c64xx.h"
+#include "s3c64xx.h"
+#include "onenand-core-s3c64xx.h"
void __init s3c6410_map_io(void)
{
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c/s3c64xx.c
similarity index 90%
rename from arch/arm/mach-s3c64xx/common.c
rename to arch/arm/mach-s3c/s3c64xx.c
index 13e9107..4dfb648 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c/s3c64xx.c
@@ -24,6 +24,7 @@
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/io.h>
+#include <linux/clk/samsung.h>
#include <linux/dma-mapping.h>
#include <linux/irq.h>
#include <linux/gpio.h>
@@ -34,22 +35,19 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
-#include <mach/map.h>
+#include "map.h"
#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/gpio-cfg.h>
-#include <plat/pwm-core.h>
-#include <plat/regs-irqtype.h>
-
-#include "common.h"
-#include "irq-uart.h"
-#include "watchdog-reset.h"
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
+#include "gpio-cfg.h"
+#include "pwm-core.h"
+#include "regs-irqtype.h"
+#include "s3c64xx.h"
+#include "irq-uart-s3c64xx.h"
/* External clock frequency */
static unsigned long xtal_f __ro_after_init = 12000000;
@@ -97,7 +95,12 @@ static struct cpu_table cpu_ids[] __initdata = {
/* minimal IO mapping */
-/* see notes on uart map in arch/arm/mach-s3c64xx/include/mach/debug-macro.S */
+/*
+ * note, for the boot process to work we have to keep the UART
+ * virtual address aligned to an 1MiB boundary for the L1
+ * mapping the head code makes. We keep the UART virtual address
+ * aligned and add in the offset when we load the value here.
+ */
#define UART_OFFS (S3C_PA_UART & 0xfffff)
static struct map_desc s3c_iodesc[] __initdata = {
@@ -170,13 +173,13 @@ static struct samsung_pwm_variant s3c64xx_pwm_variant = {
.tclk_mask = (1 << 7) | (1 << 6) | (1 << 5),
};
-void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+void __init s3c64xx_set_timer_source(unsigned int event, unsigned int source)
{
s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
}
-void __init samsung_timer_init(void)
+void __init s3c64xx_timer_init(void)
{
unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
@@ -228,13 +231,7 @@ core_initcall(s3c64xx_dev_init);
void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
{
- /*
- * FIXME: there is no better place to put this at the moment
- * (s3c64xx_clk_init needs ioremap and must happen before init_time
- * samsung_wdt_reset_init needs clocks)
- */
s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS);
- samsung_wdt_reset_init(S3C_VA_WATCHDOG);
printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
@@ -428,12 +425,3 @@ static int __init s3c64xx_init_irq_eint(void)
return 0;
}
arch_initcall(s3c64xx_init_irq_eint);
-
-void s3c64xx_restart(enum reboot_mode mode, const char *cmd)
-{
- if (mode != REBOOT_SOFT)
- samsung_wdt_reset();
-
- /* if all else fails, or mode was for soft, jump to 0 */
- soft_restart(0);
-}
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c/s3c64xx.h
similarity index 79%
rename from arch/arm/mach-s3c64xx/common.h
rename to arch/arm/mach-s3c/s3c64xx.h
index 0367088..92258e4 100644
--- a/arch/arm/mach-s3c64xx/common.h
+++ b/arch/arm/mach-s3c/s3c64xx.h
@@ -19,11 +19,7 @@
void s3c64xx_init_irq(u32 vic0, u32 vic1);
void s3c64xx_init_io(struct map_desc *mach_desc, int size);
-void s3c64xx_restart(enum reboot_mode mode, const char *cmd);
-
struct device_node;
-void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
- unsigned long xusbxti_f, bool is_s3c6400, void __iomem *reg_base);
void s3c64xx_set_xtal_freq(unsigned long freq);
void s3c64xx_set_xusbxti_freq(unsigned long freq);
@@ -54,4 +50,17 @@ extern struct pl08x_platform_data s3c64xx_dma0_plat_data;
extern struct pl08x_platform_data s3c64xx_dma1_plat_data;
#endif
+/* Samsung HR-Timer Clock mode */
+enum s3c64xx_timer_mode {
+ S3C64XX_PWM0,
+ S3C64XX_PWM1,
+ S3C64XX_PWM2,
+ S3C64XX_PWM3,
+ S3C64XX_PWM4,
+};
+
+extern void __init s3c64xx_set_timer_source(enum s3c64xx_timer_mode event,
+ enum s3c64xx_timer_mode source);
+extern void __init s3c64xx_timer_init(void);
+
#endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/mach-s3c/sdhci.h
similarity index 99%
rename from arch/arm/plat-samsung/include/plat/sdhci.h
rename to arch/arm/mach-s3c/sdhci.h
index 5731e42..9f9d419 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/mach-s3c/sdhci.h
@@ -15,7 +15,7 @@
#define __PLAT_S3C_SDHCI_H __FILE__
#include <linux/platform_data/mmc-sdhci-s3c.h>
-#include <plat/devs.h>
+#include "devs.h"
/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
* @pd: The default platform data for this device.
diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c
similarity index 85%
rename from arch/arm/mach-s3c64xx/setup-fb-24bpp.c
rename to arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c
index 2c7178b..cfa34b5 100644
--- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
+++ b/arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c
@@ -12,9 +12,9 @@
#include <linux/fb.h>
#include <linux/gpio.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
+#include "fb.h"
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
void s3c64xx_fb_gpio_setup_24bpp(void)
{
diff --git a/arch/arm/mach-s3c24xx/setup-i2c.c b/arch/arm/mach-s3c/setup-i2c-s3c24xx.c
similarity index 79%
rename from arch/arm/mach-s3c24xx/setup-i2c.c
rename to arch/arm/mach-s3c/setup-i2c-s3c24xx.c
index 1a01d44..0d88366 100644
--- a/arch/arm/mach-s3c24xx/setup-i2c.c
+++ b/arch/arm/mach-s3c/setup-i2c-s3c24xx.c
@@ -10,11 +10,11 @@
struct platform_device;
-#include <plat/gpio-cfg.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+
+#include "gpio-cfg.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c/setup-i2c0-s3c64xx.c
similarity index 89%
rename from arch/arm/mach-s3c64xx/setup-i2c0.c
rename to arch/arm/mach-s3c/setup-i2c0-s3c64xx.c
index 552eb50..a6ef8d2 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c0.c
+++ b/arch/arm/mach-s3c/setup-i2c0-s3c64xx.c
@@ -14,8 +14,8 @@
struct platform_device; /* don't need the contents */
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c/setup-i2c1-s3c64xx.c
similarity index 89%
rename from arch/arm/mach-s3c64xx/setup-i2c1.c
rename to arch/arm/mach-s3c/setup-i2c1-s3c64xx.c
index d231f0f..0fe3736 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c1.c
+++ b/arch/arm/mach-s3c/setup-i2c1-s3c64xx.c
@@ -14,8 +14,8 @@
struct platform_device; /* don't need the contents */
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
diff --git a/arch/arm/mach-s3c64xx/setup-ide.c b/arch/arm/mach-s3c/setup-ide-s3c64xx.c
similarity index 89%
rename from arch/arm/mach-s3c64xx/setup-ide.c
rename to arch/arm/mach-s3c/setup-ide-s3c64xx.c
index 810139a..f11f2b0 100644
--- a/arch/arm/mach-s3c64xx/setup-ide.c
+++ b/arch/arm/mach-s3c/setup-ide-s3c64xx.c
@@ -9,12 +9,13 @@
#include <linux/gpio.h>
#include <linux/io.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
#include <linux/platform_data/ata-samsung_cf.h>
+#include "map.h"
+#include "regs-clock.h"
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
+
void s3c64xx_ide_setup_gpio(void)
{
u32 reg;
diff --git a/arch/arm/mach-s3c64xx/setup-keypad.c b/arch/arm/mach-s3c/setup-keypad-s3c64xx.c
similarity index 86%
rename from arch/arm/mach-s3c64xx/setup-keypad.c
rename to arch/arm/mach-s3c/setup-keypad-s3c64xx.c
index 3519610..8463ad3 100644
--- a/arch/arm/mach-s3c64xx/setup-keypad.c
+++ b/arch/arm/mach-s3c/setup-keypad-s3c64xx.c
@@ -6,9 +6,9 @@
// GPIO configuration for S3C64XX KeyPad device
#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <plat/keypad.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "keypad.h"
+#include "gpio-samsung.h"
void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
{
diff --git a/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c
similarity index 88%
rename from arch/arm/mach-s3c24xx/setup-sdhci-gpio.c
rename to arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c
index 218346a..02131b3 100644
--- a/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c
@@ -14,9 +14,10 @@
#include <linux/io.h>
#include <linux/gpio.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
+#include "sdhci.h"
void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c/setup-sdhci-gpio-s3c64xx.c
similarity index 94%
rename from arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
rename to arch/arm/mach-s3c/setup-sdhci-gpio-s3c64xx.c
index 138455a..646ff94 100644
--- a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s3c/setup-sdhci-gpio-s3c64xx.c
@@ -13,9 +13,9 @@
#include <linux/io.h>
#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <plat/sdhci.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "sdhci.h"
+#include "gpio-samsung.h"
void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
diff --git a/arch/arm/mach-s3c24xx/setup-spi.c b/arch/arm/mach-s3c/setup-spi-s3c24xx.c
similarity index 84%
rename from arch/arm/mach-s3c24xx/setup-spi.c
rename to arch/arm/mach-s3c/setup-spi-s3c24xx.c
index 6c2b96a..93fa1bb 100644
--- a/arch/arm/mach-s3c24xx/setup-spi.c
+++ b/arch/arm/mach-s3c/setup-spi-s3c24xx.c
@@ -8,10 +8,10 @@
#include <linux/gpio.h>
#include <linux/platform_device.h>
-#include <plat/gpio-cfg.h>
+#include "gpio-cfg.h"
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
+#include "hardware-s3c24xx.h"
+#include "regs-gpio.h"
#ifdef CONFIG_S3C64XX_DEV_SPI0
int s3c64xx_spi0_cfg_gpio(void)
diff --git a/arch/arm/mach-s3c64xx/setup-spi.c b/arch/arm/mach-s3c/setup-spi-s3c64xx.c
similarity index 83%
rename from arch/arm/mach-s3c64xx/setup-spi.c
rename to arch/arm/mach-s3c/setup-spi-s3c64xx.c
index 39dfae1..efcf78d 100644
--- a/arch/arm/mach-s3c64xx/setup-spi.c
+++ b/arch/arm/mach-s3c/setup-spi-s3c64xx.c
@@ -4,8 +4,9 @@
// http://www.samsung.com/
#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
+#include <linux/platform_data/spi-s3c64xx.h>
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
#ifdef CONFIG_S3C64XX_DEV_SPI0
int s3c64xx_spi0_cfg_gpio(void)
diff --git a/arch/arm/mach-s3c24xx/setup-ts.c b/arch/arm/mach-s3c/setup-ts-s3c24xx.c
similarity index 80%
rename from arch/arm/mach-s3c24xx/setup-ts.c
rename to arch/arm/mach-s3c/setup-ts-s3c24xx.c
index 53a14d4..57363ea 100644
--- a/arch/arm/mach-s3c24xx/setup-ts.c
+++ b/arch/arm/mach-s3c/setup-ts-s3c24xx.c
@@ -10,12 +10,14 @@
struct platform_device; /* don't need the contents */
-#include <plat/gpio-cfg.h>
-#include <mach/hardware.h>
-#include <mach/gpio-samsung.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
/**
* s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems
+ * @dev: Device to configure GPIO for (ignored)
*
* Configure the GPIO for the S3C2410 system, where we have external FETs
* connected to the device (later systems such as the S3C2440 integrate
diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c/setup-usb-phy-s3c64xx.c
similarity index 91%
rename from arch/arm/mach-s3c64xx/setup-usb-phy.c
rename to arch/arm/mach-s3c/setup-usb-phy-s3c64xx.c
index d6b0e3b..500d105 100644
--- a/arch/arm/mach-s3c64xx/setup-usb-phy.c
+++ b/arch/arm/mach-s3c/setup-usb-phy-s3c64xx.c
@@ -8,12 +8,12 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/platform_device.h>
-#include <mach/map.h>
-#include <plat/cpu.h>
-#include <plat/usb-phy.h>
+#include "map.h"
+#include "cpu.h"
+#include "usb-phy.h"
-#include "regs-sys.h"
-#include "regs-usb-hsotg-phy.h"
+#include "regs-sys-s3c64xx.h"
+#include "regs-usb-hsotg-phy-s3c64xx.h"
enum samsung_usb_phy_type {
USB_PHY_TYPE_DEVICE,
@@ -31,7 +31,7 @@ static int s3c_usb_otgphy_init(struct platform_device *pdev)
phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK;
xusbxti = clk_get(&pdev->dev, "xusbxti");
- if (xusbxti && !IS_ERR(xusbxti)) {
+ if (!IS_ERR(xusbxti)) {
switch (clk_get_rate(xusbxti)) {
case 12 * MHZ:
phyclk |= S3C_PHYCLK_CLKSEL_12M;
diff --git a/arch/arm/mach-s3c24xx/simtec-audio.c b/arch/arm/mach-s3c/simtec-audio.c
similarity index 86%
rename from arch/arm/mach-s3c24xx/simtec-audio.c
rename to arch/arm/mach-s3c/simtec-audio.c
index 12e17f8..487485b 100644
--- a/arch/arm/mach-s3c24xx/simtec-audio.c
+++ b/arch/arm/mach-s3c/simtec-audio.c
@@ -12,11 +12,12 @@
#include <linux/device.h>
#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-#include <plat/devs.h>
+#include "devs.h"
#include "bast.h"
#include "simtec.h"
@@ -65,6 +66,10 @@ int __init simtec_audio_add(const char *name, bool has_lr_routing,
if (has_lr_routing)
simtec_audio_platdata.startup = simtec_audio_startup_lrroute;
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+
platform_device_register(&s3c_device_iis);
platform_device_register(&simtec_audio_dev);
return 0;
diff --git a/arch/arm/mach-s3c24xx/simtec-nor.c b/arch/arm/mach-s3c/simtec-nor.c
similarity index 98%
rename from arch/arm/mach-s3c24xx/simtec-nor.c
rename to arch/arm/mach-s3c/simtec-nor.c
index 26b1849..a6fba05 100644
--- a/arch/arm/mach-s3c24xx/simtec-nor.c
+++ b/arch/arm/mach-s3c/simtec-nor.c
@@ -21,7 +21,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/map.h>
+#include "map.h"
#include "bast.h"
#include "simtec.h"
diff --git a/arch/arm/mach-s3c24xx/simtec-pm.c b/arch/arm/mach-s3c/simtec-pm.c
similarity index 90%
rename from arch/arm/mach-s3c24xx/simtec-pm.c
rename to arch/arm/mach-s3c/simtec-pm.c
index c19074d..490256a 100644
--- a/arch/arm/mach-s3c24xx/simtec-pm.c
+++ b/arch/arm/mach-s3c/simtec-pm.c
@@ -19,16 +19,14 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
+#include "map.h"
+#include "regs-gpio.h"
#include <asm/mach-types.h>
-#include <plat/pm.h>
+#include "pm.h"
-#include "regs-mem.h"
+#include "regs-mem-s3c24xx.h"
#define COPYRIGHT ", Copyright 2005 Simtec Electronics"
diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c/simtec-usb.c
similarity index 96%
rename from arch/arm/mach-s3c24xx/simtec-usb.c
rename to arch/arm/mach-s3c/simtec-usb.c
index dc1016f..18fe064 100644
--- a/arch/arm/mach-s3c24xx/simtec-usb.c
+++ b/arch/arm/mach-s3c/simtec-usb.c
@@ -23,12 +23,12 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
+#include <mach/irqs.h>
#include <asm/irq.h>
#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include <plat/devs.h>
+#include "devs.h"
#include "bast.h"
#include "simtec.h"
diff --git a/arch/arm/mach-s3c24xx/simtec.h b/arch/arm/mach-s3c/simtec.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/simtec.h
rename to arch/arm/mach-s3c/simtec.h
diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/arch/arm/mach-s3c/sleep-s3c2410.S
similarity index 90%
rename from arch/arm/mach-s3c24xx/sleep-s3c2410.S
rename to arch/arm/mach-s3c/sleep-s3c2410.S
index 659f9eff..04aded9 100644
--- a/arch/arm/mach-s3c24xx/sleep-s3c2410.S
+++ b/arch/arm/mach-s3c/sleep-s3c2410.S
@@ -13,13 +13,12 @@
#include <linux/linkage.h>
#include <linux/serial_s3c.h>
#include <asm/assembler.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
+#include "map.h"
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
+#include "regs-gpio.h"
+#include "regs-clock.h"
-#include "regs-mem.h"
+#include "regs-mem-s3c24xx.h"
/* s3c2410_cpu_suspend
*
diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2412.S b/arch/arm/mach-s3c/sleep-s3c2412.S
similarity index 93%
rename from arch/arm/mach-s3c24xx/sleep-s3c2412.S
rename to arch/arm/mach-s3c/sleep-s3c2412.S
index c373f1c..b4b6173 100644
--- a/arch/arm/mach-s3c24xx/sleep-s3c2412.S
+++ b/arch/arm/mach-s3c/sleep-s3c2412.S
@@ -8,10 +8,9 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
+#include "map.h"
-#include <mach/regs-irq.h>
+#include "regs-irq.h"
.text
diff --git a/arch/arm/mach-s3c24xx/sleep.S b/arch/arm/mach-s3c/sleep-s3c24xx.S
similarity index 92%
rename from arch/arm/mach-s3c24xx/sleep.S
rename to arch/arm/mach-s3c/sleep-s3c24xx.S
index f0f11ad..4b2af91 100644
--- a/arch/arm/mach-s3c24xx/sleep.S
+++ b/arch/arm/mach-s3c/sleep-s3c24xx.S
@@ -13,11 +13,10 @@
#include <linux/linkage.h>
#include <linux/serial_s3c.h>
#include <asm/assembler.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
+#include "map.h"
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
+#include "regs-gpio.h"
+#include "regs-clock.h"
/*
* S3C24XX_DEBUG_RESUME is dangerous if your bootloader does not
diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c/sleep-s3c64xx.S
similarity index 96%
rename from arch/arm/mach-s3c64xx/sleep.S
rename to arch/arm/mach-s3c/sleep-s3c64xx.S
index 39e16a0..739e53f 100644
--- a/arch/arm/mach-s3c64xx/sleep.S
+++ b/arch/arm/mach-s3c/sleep-s3c64xx.S
@@ -11,12 +11,12 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <mach/map.h>
+#include "map.h"
#undef S3C64XX_VA_GPIO
#define S3C64XX_VA_GPIO (0x0)
-#include <mach/regs-gpio.h>
+#include "regs-gpio.h"
#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
diff --git a/arch/arm/mach-s3c24xx/spi-core.h b/arch/arm/mach-s3c/spi-core-s3c24xx.h
similarity index 81%
rename from arch/arm/mach-s3c24xx/spi-core.h
rename to arch/arm/mach-s3c/spi-core-s3c24xx.h
index 1048fac..0576674 100644
--- a/arch/arm/mach-s3c24xx/spi-core.h
+++ b/arch/arm/mach-s3c/spi-core-s3c24xx.h
@@ -3,8 +3,8 @@
* Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de>
*/
-#ifndef __PLAT_S3C_SPI_CORE_H
-#define __PLAT_S3C_SPI_CORE_H
+#ifndef __PLAT_S3C_SPI_CORE_S3C24XX_H
+#define __PLAT_S3C_SPI_CORE_S3C24XX_H
/* These functions are only for use with the core support code, such as
* the cpu specific initialisation code
@@ -24,4 +24,4 @@ static inline void s3c24xx_spi_setname(char *name)
#endif
}
-#endif /* __PLAT_S3C_SPI_CORE_H */
+#endif /* __PLAT_S3C_SPI_CORE_S3C24XX_H */
diff --git a/arch/arm/plat-samsung/include/plat/usb-phy.h b/arch/arm/mach-s3c/usb-phy.h
similarity index 100%
rename from arch/arm/plat-samsung/include/plat/usb-phy.h
rename to arch/arm/mach-s3c/usb-phy.h
diff --git a/arch/arm/mach-s3c24xx/vr1000.h b/arch/arm/mach-s3c/vr1000.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/vr1000.h
rename to arch/arm/mach-s3c/vr1000.h
diff --git a/arch/arm/plat-samsung/wakeup-mask.c b/arch/arm/mach-s3c/wakeup-mask.c
similarity index 94%
rename from arch/arm/plat-samsung/wakeup-mask.c
rename to arch/arm/mach-s3c/wakeup-mask.c
index 24f96fb..b490e75 100644
--- a/arch/arm/plat-samsung/wakeup-mask.c
+++ b/arch/arm/mach-s3c/wakeup-mask.c
@@ -11,8 +11,8 @@
#include <linux/irq.h>
#include <linux/io.h>
-#include <plat/wakeup-mask.h>
-#include <plat/pm.h>
+#include "wakeup-mask.h"
+#include "pm.h"
void samsung_sync_wakemask(void __iomem *reg,
const struct samsung_wakeup_mask *mask, int nr_mask)
diff --git a/arch/arm/plat-samsung/include/plat/wakeup-mask.h b/arch/arm/mach-s3c/wakeup-mask.h
similarity index 100%
rename from arch/arm/plat-samsung/include/plat/wakeup-mask.h
rename to arch/arm/mach-s3c/wakeup-mask.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/fb.h b/arch/arm/mach-s3c24xx/include/mach/fb.h
deleted file mode 100644
index 4e539cb..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/fb.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <plat/fb-s3c2410.h>
diff --git a/arch/arm/mach-s3c24xx/include/mach/hardware.h b/arch/arm/mach-s3c24xx/include/mach/hardware.h
deleted file mode 100644
index f28ac6c..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#ifndef __ASSEMBLY__
-
-extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
-
-#endif /* __ASSEMBLY__ */
-
-#include <linux/sizes.h>
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/io.h b/arch/arm/mach-s3c24xx/include/mach/io.h
deleted file mode 100644
index f960e6d..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/io.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-s3c2410/include/mach/io.h
- * from arch/arm/mach-rpc/include/mach/io.h
- *
- * Copyright (C) 1997 Russell King
- * (C) 2003 Simtec Electronics
-*/
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <mach/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses. PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1. ARM addresses are above A28
- * and are translated to the start of IO. Note that all addresses are
- * not shifted left!
- */
-
-#define __PORT_PCIO(x) ((x) < (1<<28))
-
-#define PCIO_BASE (S3C24XX_VA_ISA_WORD)
-#define PCIO_BASE_b (S3C24XX_VA_ISA_BYTE)
-#define PCIO_BASE_w (S3C24XX_VA_ISA_WORD)
-#define PCIO_BASE_l (S3C24XX_VA_ISA_WORD)
-/*
- * Dynamic IO functions - let the compiler
- * optimize the expressions
- */
-
-#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \
-static inline void __out##fnsuffix (unsigned int val, unsigned int port) \
-{ \
- unsigned long temp; \
- __asm__ __volatile__( \
- "cmp %2, #(1<<28)\n\t" \
- "mov %0, %2\n\t" \
- "addcc %0, %0, %3\n\t" \
- "str" instr " %1, [%0, #0 ] @ out" #fnsuffix \
- : "=&r" (temp) \
- : "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \
- : "cc"); \
-}
-
-
-#define DECLARE_DYN_IN(sz,fnsuffix,instr) \
-static inline unsigned sz __in##fnsuffix (unsigned int port) \
-{ \
- unsigned long temp, value; \
- __asm__ __volatile__( \
- "cmp %2, #(1<<28)\n\t" \
- "mov %0, %2\n\t" \
- "addcc %0, %0, %3\n\t" \
- "ldr" instr " %1, [%0, #0 ] @ in" #fnsuffix \
- : "=&r" (temp), "=r" (value) \
- : "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \
- : "cc"); \
- return (unsigned sz)value; \
-}
-
-static inline void __iomem *__ioaddr (unsigned long port)
-{
- return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port;
-}
-
-#define DECLARE_IO(sz,fnsuffix,instr) \
- DECLARE_DYN_IN(sz,fnsuffix,instr) \
- DECLARE_DYN_OUT(sz,fnsuffix,instr)
-
-DECLARE_IO(char,b,"b")
-DECLARE_IO(short,w,"h")
-DECLARE_IO(int,l,"")
-
-#undef DECLARE_IO
-#undef DECLARE_DYN_IN
-
-/*
- * Constant address IO functions
- *
- * These have to be macros for the 'J' constraint to work -
- * +/-4096 immediate operand.
- */
-#define __outbc(value,port) \
-({ \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "strb %0, [%1, %2] @ outbc" \
- : : "r" (value), "r" (PCIO_BASE), "Jr" ((port))); \
- else \
- __asm__ __volatile__( \
- "strb %0, [%1, #0] @ outbc" \
- : : "r" (value), "r" ((port))); \
-})
-
-#define __inbc(port) \
-({ \
- unsigned char result; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "ldrb %0, [%1, %2] @ inbc" \
- : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \
- else \
- __asm__ __volatile__( \
- "ldrb %0, [%1, #0] @ inbc" \
- : "=r" (result) : "r" ((port))); \
- result; \
-})
-
-#define __outwc(value,port) \
-({ \
- unsigned long v = value; \
- if (__PORT_PCIO((port))) { \
- if ((port) < 256 && (port) > -256) \
- __asm__ __volatile__( \
- "strh %0, [%1, %2] @ outwc" \
- : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \
- else if ((port) > 0) \
- __asm__ __volatile__( \
- "strh %0, [%1, %2] @ outwc" \
- : : "r" (v), \
- "r" (PCIO_BASE + ((port) & ~0xff)), \
- "Jr" (((port) & 0xff))); \
- else \
- __asm__ __volatile__( \
- "strh %0, [%1, #0] @ outwc" \
- : : "r" (v), \
- "r" (PCIO_BASE + (port))); \
- } else \
- __asm__ __volatile__( \
- "strh %0, [%1, #0] @ outwc" \
- : : "r" (v), "r" ((port))); \
-})
-
-#define __inwc(port) \
-({ \
- unsigned short result; \
- if (__PORT_PCIO((port))) { \
- if ((port) < 256 && (port) > -256 ) \
- __asm__ __volatile__( \
- "ldrh %0, [%1, %2] @ inwc" \
- : "=r" (result) \
- : "r" (PCIO_BASE), \
- "Jr" ((port))); \
- else if ((port) > 0) \
- __asm__ __volatile__( \
- "ldrh %0, [%1, %2] @ inwc" \
- : "=r" (result) \
- : "r" (PCIO_BASE + ((port) & ~0xff)), \
- "Jr" (((port) & 0xff))); \
- else \
- __asm__ __volatile__( \
- "ldrh %0, [%1, #0] @ inwc" \
- : "=r" (result) \
- : "r" (PCIO_BASE + ((port)))); \
- } else \
- __asm__ __volatile__( \
- "ldrh %0, [%1, #0] @ inwc" \
- : "=r" (result) : "r" ((port))); \
- result; \
-})
-
-#define __outlc(value,port) \
-({ \
- unsigned long v = value; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "str %0, [%1, %2] @ outlc" \
- : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \
- else \
- __asm__ __volatile__( \
- "str %0, [%1, #0] @ outlc" \
- : : "r" (v), "r" ((port))); \
-})
-
-#define __inlc(port) \
-({ \
- unsigned long result; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2] @ inlc" \
- : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \
- else \
- __asm__ __volatile__( \
- "ldr %0, [%1, #0] @ inlc" \
- : "=r" (result) : "r" ((port))); \
- result; \
-})
-
-#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)0 + (port)))
-
-#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p))
-#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p))
-#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p))
-#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
-#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
-#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p))
-
-#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l)
-#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l)
-#define insl(p,d,l) __raw_readsl(__ioaddr(p),d,l)
-
-#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l)
-#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l)
-#define outsl(p,d,l) __raw_writesl(__ioaddr(p),d,l)
-
-#endif
diff --git a/arch/arm/mach-s3c24xx/setup-camif.c b/arch/arm/mach-s3c24xx/setup-camif.c
deleted file mode 100644
index 2b262fa..0000000
--- a/arch/arm/mach-s3c24xx/setup-camif.c
+++ /dev/null
@@ -1,67 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2012 Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
-//
-// Helper functions for S3C24XX/S3C64XX SoC series CAMIF driver
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
-
-/* Number of camera port pins, without FIELD */
-#define S3C_CAMIF_NUM_GPIOS 13
-
-/* Default camera port configuration helpers. */
-
-static void camif_get_gpios(int *gpio_start, int *gpio_reset)
-{
-#ifdef CONFIG_ARCH_S3C24XX
- *gpio_start = S3C2410_GPJ(0);
- *gpio_reset = S3C2410_GPJ(12);
-#else
- /* s3c64xx */
- *gpio_start = S3C64XX_GPF(0);
- *gpio_reset = S3C64XX_GPF(3);
-#endif
-}
-
-int s3c_camif_gpio_get(void)
-{
- int gpio_start, gpio_reset;
- int ret, i;
-
- camif_get_gpios(&gpio_start, &gpio_reset);
-
- for (i = 0; i < S3C_CAMIF_NUM_GPIOS; i++) {
- int gpio = gpio_start + i;
-
- if (gpio == gpio_reset)
- continue;
-
- ret = gpio_request(gpio, "camif");
- if (!ret)
- ret = s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- if (ret) {
- pr_err("failed to configure GPIO %d\n", gpio);
- for (--i; i >= 0; i--)
- gpio_free(gpio--);
- return ret;
- }
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
-
- return 0;
-}
-
-void s3c_camif_gpio_put(void)
-{
- int i, gpio_start, gpio_reset;
-
- camif_get_gpios(&gpio_start, &gpio_reset);
-
- for (i = 0; i < S3C_CAMIF_NUM_GPIOS; i++) {
- int gpio = gpio_start + i;
- if (gpio != gpio_reset)
- gpio_free(gpio);
- }
-}
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
deleted file mode 100644
index 8caeb4a..0000000
--- a/arch/arm/mach-s3c64xx/Makefile
+++ /dev/null
@@ -1,62 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
-asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
-
-# PM
-
-obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_PM_SLEEP) += sleep.o
-obj-$(CONFIG_CPU_IDLE) += cpuidle.o
-
-ifdef CONFIG_SAMSUNG_ATAGS
-
-obj-$(CONFIG_PM_SLEEP) += irq-pm.o
-
-# Core
-
-obj-y += common.o
-obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
-obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
-
-# DMA support
-
-obj-$(CONFIG_S3C64XX_PL080) += pl080.o
-
-# Device support
-
-obj-y += dev-uart.o
-obj-y += dev-audio.o
-
-# Device setup
-
-obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
-obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi.o
-obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy.o
-
-obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
-obj-$(CONFIG_MACH_HMT) += mach-hmt.o
-obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o
-obj-$(CONFIG_MACH_NCP) += mach-ncp.o
-obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
-obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
-obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
-obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
-obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
-obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
-obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
-endif
-
-obj-$(CONFIG_MACH_S3C64XX_DT) += mach-s3c64xx-dt.o
diff --git a/arch/arm/mach-s3c64xx/include/mach/hardware.h b/arch/arm/mach-s3c64xx/include/mach/hardware.h
deleted file mode 100644
index c4ed359..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/hardware.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* linux/arch/arm/mach-s3c6400/include/mach/hardware.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6400 - Hardware support
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
deleted file mode 100644
index bbf79ed..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
- */
-
-#ifndef __MACH_S3C64XX_PM_CORE_H
-#define __MACH_S3C64XX_PM_CORE_H __FILE__
-
-#include <linux/serial_s3c.h>
-#include <linux/delay.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-#include <mach/map.h>
-
-static inline void s3c_pm_debug_init_uart(void)
-{
- u32 tmp = __raw_readl(S3C_PCLK_GATE);
-
- /* As a note, since the S3C64XX UARTs generally have multiple
- * clock sources, we simply enable PCLK at the moment and hope
- * that the resume settings for the UART are suitable for the
- * use with PCLK.
- */
-
- tmp |= S3C_CLKCON_PCLK_UART0;
- tmp |= S3C_CLKCON_PCLK_UART1;
- tmp |= S3C_CLKCON_PCLK_UART2;
- tmp |= S3C_CLKCON_PCLK_UART3;
-
- __raw_writel(tmp, S3C_PCLK_GATE);
- udelay(10);
-}
-
-static inline void s3c_pm_arch_prepare_irqs(void)
-{
- /* VIC should have already been taken care of */
-
- /* clear any pending EINT0 interrupts */
- __raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
-}
-
-static inline void s3c_pm_arch_stop_clocks(void)
-{
-}
-
-static inline void s3c_pm_arch_show_resume_irqs(void)
-{
-}
-
-/* make these defines, we currently do not have any need to change
- * the IRQ wake controls depending on the CPU we are running on */
-#ifdef CONFIG_PM_SLEEP
-#define s3c_irqwake_eintallow ((1 << 28) - 1)
-#define s3c_irqwake_intallow (~0)
-#else
-#define s3c_irqwake_eintallow 0
-#define s3c_irqwake_intallow 0
-#endif
-
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
- struct pm_uart_save *save)
-{
- u32 ucon = __raw_readl(regs + S3C2410_UCON);
- u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
- u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
- u32 new_ucon;
- u32 delta;
-
- /* S3C64XX UART blocks only support level interrupts, so ensure that
- * when we restore unused UART blocks we force the level interrupt
- * settigs. */
- save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
-
- /* We have a constraint on changing the clock type of the UART
- * between UCLKx and PCLK, so ensure that when we restore UCON
- * that the CLK field is correctly modified if the bootloader
- * has changed anything.
- */
- if (ucon_clk != save_clk) {
- new_ucon = save->ucon;
- delta = ucon_clk ^ save_clk;
-
- /* change from UCLKx => wrong PCLK,
- * either UCLK can be tested for by a bit-test
- * with UCLK0 */
- if (ucon_clk & S3C6400_UCON_UCLK0 &&
- !(save_clk & S3C6400_UCON_UCLK0) &&
- delta & S3C6400_UCON_PCLK2) {
- new_ucon &= ~S3C6400_UCON_UCLK0;
- } else if (delta == S3C6400_UCON_PCLK2) {
- /* as an precaution, don't change from
- * PCLK2 => PCLK or vice-versa */
- new_ucon ^= S3C6400_UCON_PCLK2;
- }
-
- S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
- ucon, new_ucon, save->ucon);
- save->ucon = new_ucon;
- }
-}
-
-static inline void s3c_pm_restored_gpios(void)
-{
- /* ensure sleep mode has been cleared from the system */
-
- __raw_writel(0, S3C64XX_SLPEN);
-}
-
-static inline void samsung_pm_saved_gpios(void)
-{
- /* turn on the sleep mode and keep it there, as it seems that during
- * suspend the xCON registers get re-set and thus you can end up with
- * problems between going to sleep and resuming.
- */
-
- __raw_writel(S3C64XX_SLPEN_USE_xSLP, S3C64XX_SLPEN);
-}
-#endif /* __MACH_S3C64XX_PM_CORE_H */
diff --git a/arch/arm/mach-s3c64xx/watchdog-reset.h b/arch/arm/mach-s3c64xx/watchdog-reset.h
deleted file mode 100644
index 1042d6c..0000000
--- a/arch/arm/mach-s3c64xx/watchdog-reset.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System define for arch_reset() function
- */
-
-#ifndef __PLAT_SAMSUNG_WATCHDOG_RESET_H
-#define __PLAT_SAMSUNG_WATCHDOG_RESET_H
-
-extern void samsung_wdt_reset(void);
-extern void samsung_wdt_reset_of_init(void);
-extern void samsung_wdt_reset_init(void __iomem *base);
-
-#endif /* __PLAT_SAMSUNG_WATCHDOG_RESET_H */
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 03984a7..95d4e82 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -14,10 +14,10 @@
select COMMON_CLK_SAMSUNG
select GPIOLIB
select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select PINCTRL
select PINCTRL_EXYNOS
+ select SOC_SAMSUNG
help
Samsung S5PV210/S5PC110 series based systems
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index e7b551e..aa0a1f0 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -3,12 +3,5 @@
# Copyright (c) 2010 Samsung Electronics Co., Ltd.
# http://www.samsung.com/
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/arch/arm/plat-samsung/include
-
-# Core
-
obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o
-
-# machine support
-
obj-y += s5pv210.o
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index b336df0..d59c094 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -13,15 +13,56 @@
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/io.h>
+#include <linux/soc/samsung/s3c-pm.h>
#include <asm/cacheflush.h>
#include <asm/suspend.h>
-#include <plat/pm-common.h>
-
#include "common.h"
#include "regs-clock.h"
+/* helper functions to save and restore register state */
+struct sleep_save {
+ void __iomem *reg;
+ unsigned long val;
+};
+
+#define SAVE_ITEM(x) \
+ { .reg = (x) }
+
+/**
+ * s3c_pm_do_save() - save a set of registers for restoration on resume.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Run through the list of registers given, saving their contents in the
+ * array for later restoration when we wakeup.
+ */
+static void s3c_pm_do_save(struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++) {
+ ptr->val = readl_relaxed(ptr->reg);
+ S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
+ }
+}
+
+/**
+ * s3c_pm_do_restore() - restore register values from the save list.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Restore the register values saved from s3c_pm_do_save().
+ *
+ * WARNING: Do not put any debug in here that may effect memory or use
+ * peripherals, as things may be changing!
+*/
+
+static void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++)
+ writel_relaxed(ptr->val, ptr->reg);
+}
+
static struct sleep_save s5pv210_core_save[] = {
/* Clock ETC */
SAVE_ITEM(S5P_MDNIE_SEL),
@@ -99,8 +140,6 @@ static int s5pv210_suspend_enter(suspend_state_t state)
u32 eint_wakeup_mask = s5pv210_read_eint_wakeup_mask();
int ret;
- s3c_pm_debug_init();
-
S3C_PMDBG("%s: suspending the system...\n", __func__);
S3C_PMDBG("%s: wakeup masks: %08x,%08x\n", __func__,
@@ -113,7 +152,7 @@ static int s5pv210_suspend_enter(suspend_state_t state)
return -EINVAL;
}
- s3c_pm_save_uarts();
+ s3c_pm_save_uarts(false);
s5pv210_pm_prepare();
flush_cache_all();
s3c_pm_check_store();
@@ -122,7 +161,7 @@ static int s5pv210_suspend_enter(suspend_state_t state)
if (ret)
return ret;
- s3c_pm_restore_uarts();
+ s3c_pm_restore_uarts(false);
S3C_PMDBG("%s: wakeup stat: %08x\n", __func__,
__raw_readl(S5P_WAKEUP_STAT));
diff --git a/arch/arm/mach-s5pv210/regs-clock.h b/arch/arm/mach-s5pv210/regs-clock.h
index 2a35c83..9cad230 100644
--- a/arch/arm/mach-s5pv210/regs-clock.h
+++ b/arch/arm/mach-s5pv210/regs-clock.h
@@ -9,7 +9,9 @@
#ifndef __ASM_ARCH_REGS_CLOCK_H
#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-#include <plat/map-base.h>
+#define S3C_ADDR_BASE 0xF6000000
+#define S3C_ADDR(x) ((void __iomem __force *)S3C_ADDR_BASE + (x))
+#define S3C_VA_SYS S3C_ADDR(0x00100000)
#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
diff --git a/arch/arm/mach-s5pv210/s5pv210.c b/arch/arm/mach-s5pv210/s5pv210.c
index 868f9c2..a21ed3b 100644
--- a/arch/arm/mach-s5pv210/s5pv210.c
+++ b/arch/arm/mach-s5pv210/s5pv210.c
@@ -13,8 +13,6 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
-#include <plat/map-base.h>
-
#include "common.h"
#include "regs-clock.h"
diff --git a/arch/arm/mach-shmobile/rcar-gen2.h b/arch/arm/mach-shmobile/rcar-gen2.h
index 4777fff..af9dbd6 100644
--- a/arch/arm/mach-shmobile/rcar-gen2.h
+++ b/arch/arm/mach-shmobile/rcar-gen2.h
@@ -2,8 +2,6 @@
#ifndef __ASM_RCAR_GEN2_H__
#define __ASM_RCAR_GEN2_H__
-void rcar_gen2_timer_init(void);
-void rcar_gen2_reserve(void);
void rcar_gen2_pm_init(void);
#endif /* __ASM_RCAR_GEN2_H__ */
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index e00f5b3..d42d934 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -59,7 +59,7 @@ static unsigned int __init get_extal_freq(void)
#define CNTCR 0
#define CNTFID0 0x20
-void __init rcar_gen2_timer_init(void)
+static void __init rcar_gen2_timer_init(void)
{
bool need_update = true;
void __iomem *base;
@@ -174,7 +174,7 @@ static int __init rcar_gen2_scan_mem(unsigned long node, const char *uname,
return 0;
}
-void __init rcar_gen2_reserve(void)
+static void __init rcar_gen2_reserve(void)
{
struct memory_reserve_config mrc;
diff --git a/arch/arm/mach-stm32/Makefile.boot b/arch/arm/mach-stm32/Makefile.boot
index cec195d..5dde732 100644
--- a/arch/arm/mach-stm32/Makefile.boot
+++ b/arch/arm/mach-stm32/Makefile.boot
@@ -1,4 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
# Empty file waiting for deletion once Makefile.boot isn't needed any more.
# Patch waits for application at
-# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
+# https://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 93fd7fc..272670e 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -23,7 +23,7 @@
config POWER_AVS_OMAP
bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
- depends on POWER_AVS && (ARCH_OMAP3 || ARCH_OMAP4) && PM
+ depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
select POWER_SUPPLY
help
Say Y to enable AVS(Adaptive Voltage Scaling)
diff --git a/arch/arm/plat-samsung/include/plat/fb-s3c2410.h b/arch/arm/plat-samsung/include/plat/fb-s3c2410.h
deleted file mode 100644
index 614240d..0000000
--- a/arch/arm/plat-samsung/include/plat/fb-s3c2410.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * Inspired by pxafb.h
-*/
-
-#ifndef __ASM_PLAT_FB_S3C2410_H
-#define __ASM_PLAT_FB_S3C2410_H __FILE__
-
-struct s3c2410fb_hw {
- unsigned long lcdcon1;
- unsigned long lcdcon2;
- unsigned long lcdcon3;
- unsigned long lcdcon4;
- unsigned long lcdcon5;
-};
-
-/* LCD description */
-struct s3c2410fb_display {
- /* LCD type */
- unsigned type;
-
- /* Screen size */
- unsigned short width;
- unsigned short height;
-
- /* Screen info */
- unsigned short xres;
- unsigned short yres;
- unsigned short bpp;
-
- unsigned pixclock; /* pixclock in picoseconds */
- unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */
- unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
- unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */
- unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */
- unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */
- unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */
-
- /* lcd configuration registers */
- unsigned long lcdcon5;
-};
-
-struct s3c2410fb_mach_info {
-
- struct s3c2410fb_display *displays; /* attached displays info */
- unsigned num_displays; /* number of defined displays */
- unsigned default_display;
-
- /* GPIOs */
-
- unsigned long gpcup;
- unsigned long gpcup_mask;
- unsigned long gpccon;
- unsigned long gpccon_mask;
- unsigned long gpdup;
- unsigned long gpdup_mask;
- unsigned long gpdcon;
- unsigned long gpdcon_mask;
-
- /* lpc3600 control register */
- unsigned long lpcsel;
-};
-
-extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
-
-#endif /* __ASM_PLAT_FB_S3C2410_H */
diff --git a/arch/arm/plat-samsung/include/plat/pm-common.h b/arch/arm/plat-samsung/include/plat/pm-common.h
deleted file mode 100644
index 1268bae..0000000
--- a/arch/arm/plat-samsung/include/plat/pm-common.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2013 Samsung Electronics Co., Ltd.
- * Tomasz Figa <t.figa@samsung.com>
- * Copyright (c) 2004 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Written by Ben Dooks, <ben@simtec.co.uk>
- */
-
-#ifndef __PLAT_SAMSUNG_PM_COMMON_H
-#define __PLAT_SAMSUNG_PM_COMMON_H __FILE__
-
-#include <linux/irq.h>
-
-/* sleep save info */
-
-/**
- * struct sleep_save - save information for shared peripherals.
- * @reg: Pointer to the register to save.
- * @val: Holder for the value saved from reg.
- *
- * This describes a list of registers which is used by the pm core and
- * other subsystem to save and restore register values over suspend.
- */
-struct sleep_save {
- void __iomem *reg;
- unsigned long val;
-};
-
-#define SAVE_ITEM(x) \
- { .reg = (x) }
-
-/* helper functions to save/restore lists of registers. */
-
-extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
-extern void s3c_pm_do_restore(const struct sleep_save *ptr, int count);
-extern void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count);
-
-/* PM debug functions */
-
-/**
- * struct pm_uart_save - save block for core UART
- * @ulcon: Save value for S3C2410_ULCON
- * @ucon: Save value for S3C2410_UCON
- * @ufcon: Save value for S3C2410_UFCON
- * @umcon: Save value for S3C2410_UMCON
- * @ubrdiv: Save value for S3C2410_UBRDIV
- *
- * Save block for UART registers to be held over sleep and restored if they
- * are needed (say by debug).
-*/
-struct pm_uart_save {
- u32 ulcon;
- u32 ucon;
- u32 ufcon;
- u32 umcon;
- u32 ubrdiv;
- u32 udivslot;
-};
-
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-/**
- * s3c_pm_dbg() - low level debug function for use in suspend/resume.
- * @msg: The message to print.
- *
- * This function is used mainly to debug the resume process before the system
- * can rely on printk/console output. It uses the low-level debugging output
- * routine printascii() to do its work.
- */
-extern void s3c_pm_dbg(const char *msg, ...);
-
-/**
- * s3c_pm_debug_init() - suspend/resume low level debug initialization.
- * @base: Virtual base of UART to use for suspend/resume debugging.
- *
- * This function needs to be called before S3C_PMDBG() can be used, to set up
- * UART port base address and configuration.
- */
-extern void s3c_pm_debug_init(void);
-
-#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
-
-extern void s3c_pm_save_uarts(void);
-extern void s3c_pm_restore_uarts(void);
-#else
-#define S3C_PMDBG(fmt...) pr_debug(fmt)
-#define s3c_pm_debug_init() do { } while (0)
-
-static inline void s3c_pm_save_uarts(void) { }
-static inline void s3c_pm_restore_uarts(void) { }
-#endif
-
-/* suspend memory checking */
-
-#ifdef CONFIG_SAMSUNG_PM_CHECK
-extern void s3c_pm_check_prepare(void);
-extern void s3c_pm_check_restore(void);
-extern void s3c_pm_check_cleanup(void);
-extern void s3c_pm_check_store(void);
-#else
-#define s3c_pm_check_prepare() do { } while (0)
-#define s3c_pm_check_restore() do { } while (0)
-#define s3c_pm_check_cleanup() do { } while (0)
-#define s3c_pm_check_store() do { } while (0)
-#endif
-
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/samsung-time.h b/arch/arm/plat-samsung/include/plat/samsung-time.h
deleted file mode 100644
index 32ab086..0000000
--- a/arch/arm/plat-samsung/include/plat/samsung-time.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Header file for samsung s3c and s5p time support
- */
-
-#ifndef __ASM_PLAT_SAMSUNG_TIME_H
-#define __ASM_PLAT_SAMSUNG_TIME_H __FILE__
-
-/* Samsung HR-Timer Clock mode */
-enum samsung_timer_mode {
- SAMSUNG_PWM0,
- SAMSUNG_PWM1,
- SAMSUNG_PWM2,
- SAMSUNG_PWM3,
- SAMSUNG_PWM4,
-};
-
-extern void __init samsung_set_timer_source(enum samsung_timer_mode event,
- enum samsung_timer_mode source);
-
-extern void __init samsung_timer_init(void);
-
-#endif /* __ASM_PLAT_SAMSUNG_TIME_H */
diff --git a/arch/arm/plat-samsung/watchdog-reset.c b/arch/arm/plat-samsung/watchdog-reset.c
deleted file mode 100644
index 71d85ff..0000000
--- a/arch/arm/plat-samsung/watchdog-reset.c
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
-//
-// Watchdog reset support for Samsung SoCs.
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#define S3C2410_WTCON 0x00
-#define S3C2410_WTDAT 0x04
-#define S3C2410_WTCNT 0x08
-
-#define S3C2410_WTCON_ENABLE (1 << 5)
-#define S3C2410_WTCON_DIV16 (0 << 3)
-#define S3C2410_WTCON_RSTEN (1 << 0)
-#define S3C2410_WTCON_PRESCALE(x) ((x) << 8)
-
-static void __iomem *wdt_base;
-static struct clk *wdt_clock;
-
-void samsung_wdt_reset(void)
-{
- if (!wdt_base) {
- pr_err("%s: wdt reset not initialized\n", __func__);
- /* delay to allow the serial port to show the message */
- mdelay(50);
- return;
- }
-
- if (!IS_ERR(wdt_clock))
- clk_prepare_enable(wdt_clock);
-
- /* disable watchdog, to be safe */
- __raw_writel(0, wdt_base + S3C2410_WTCON);
-
- /* put initial values into count and data */
- __raw_writel(0x80, wdt_base + S3C2410_WTCNT);
- __raw_writel(0x80, wdt_base + S3C2410_WTDAT);
-
- /* set the watchdog to go and reset... */
- __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV16 |
- S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x20),
- wdt_base + S3C2410_WTCON);
-
- /* wait for reset to assert... */
- mdelay(500);
-
- pr_err("Watchdog reset failed to assert reset\n");
-
- /* delay to allow the serial port to show the message */
- mdelay(50);
-}
-
-#ifdef CONFIG_OF
-static const struct of_device_id s3c2410_wdt_match[] = {
- { .compatible = "samsung,s3c2410-wdt" },
- { .compatible = "samsung,s3c6410-wdt" },
- {},
-};
-
-void __init samsung_wdt_reset_of_init(void)
-{
- struct device_node *np;
-
- np = of_find_matching_node(NULL, s3c2410_wdt_match);
- if (!np) {
- pr_err("%s: failed to find watchdog node\n", __func__);
- return;
- }
-
- wdt_base = of_iomap(np, 0);
- if (!wdt_base) {
- pr_err("%s: failed to map watchdog registers\n", __func__);
- return;
- }
-
- wdt_clock = of_clk_get(np, 0);
-}
-#endif
-
-void __init samsung_wdt_reset_init(void __iomem *base)
-{
- wdt_base = base;
- wdt_clock = clk_get(NULL, "watchdog");
-}
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index cd58f84..6f2494d 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -80,7 +80,6 @@
select EXYNOS_CHIPID
select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
select EXYNOS_PMU
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select PINCTRL
select PINCTRL_EXYNOS
@@ -300,6 +299,13 @@
This enables support for the ARMv8 software model (Versatile
Express).
+config ARCH_VISCONTI
+ bool "Toshiba Visconti SoC Family"
+ select PINCTRL
+ select PINCTRL_VISCONTI
+ help
+ This enables support for Toshiba Visconti SoCs Family.
+
config ARCH_VULCAN
def_bool n
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 270e8aa..9b117065 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -27,5 +27,6 @@
subdir-y += sprd
subdir-y += synaptics
subdir-y += ti
+subdir-y += toshiba
subdir-y += xilinx
subdir-y += zte
diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
index 2006ad5..2c78cae 100644
--- a/arch/arm64/boot/dts/actions/s700.dtsi
+++ b/arch/arm64/boot/dts/actions/s700.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/clock/actions,s700-cmu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/owl-s700-powergate.h>
#include <dt-bindings/reset/actions,s700-reset.h>
/ {
@@ -231,7 +232,7 @@ timer: timer@e024c000 {
pinctrl: pinctrl@e01b0000 {
compatible = "actions,s700-pinctrl";
- reg = <0x0 0xe01b0000 0x0 0x1000>;
+ reg = <0x0 0xe01b0000 0x0 0x100>;
clocks = <&cmu CLK_GPIO>;
gpio-controller;
gpio-ranges = <&pinctrl 0 0 136>;
@@ -244,5 +245,19 @@ pinctrl: pinctrl@e01b0000 {
<GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ dma: dma-controller@e0230000 {
+ compatible = "actions,s700-dma";
+ reg = <0x0 0xe0230000 0x0 0x1000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ dma-channels = <10>;
+ dma-requests = <44>;
+ clocks = <&cmu CLK_DMAC>;
+ power-domains = <&sps S700_PD_DMA>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 916d10d..211d1e9 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -15,6 +15,7 @@
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
new file mode 100644
index 0000000..d34c2bb
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com>
+ */
+
+/dts-v1/;
+
+#include "sun50i-a100.dtsi"
+
+/{
+ model = "Allwinner A100 Perf1";
+ compatible = "allwinner,a100-perf1", "allwinner,sun50i-a100";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&pio {
+ vcc-pb-supply = <®_dcdc1>;
+ vcc-pc-supply = <®_eldo1>;
+ vcc-pd-supply = <®_dcdc1>;
+ vcc-pe-supply = <®_dldo2>;
+ vcc-pf-supply = <®_dcdc1>;
+ vcc-pg-supply = <®_dldo1>;
+ vcc-ph-supply = <®_dcdc1>;
+};
+
+&r_pio {
+ /*
+ * FIXME: We can't add that supply for now since it would
+ * create a circular dependency between pinctrl, the regulator
+ * and the RSB Bus.
+ *
+ * vcc-pl-supply = <®_aldo3>;
+ */
+};
+
+&r_i2c0 {
+ status = "okay";
+
+ axp803: pmic@34 {
+ compatible = "x-powers,axp803";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
+ };
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-dram-1";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-usb-pl";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-io-usb-pd-emmc-nand-card";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ /*
+ * FIXME: update min and max before support dvfs.
+ */
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+®_dcdc4 {
+ regulator-always-on;
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+ regulator-name = "vdd-sys-usb-dram";
+};
+
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram-2";
+};
+
+®_dldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pg-dcxo-wifi";
+};
+
+®_dldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vcc-pe-csi";
+};
+
+®_dldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "ldo-avdd-csi";
+};
+
+®_dldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "avcc-csi";
+};
+
+®_eldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pc-lvds-csi-efuse-emmc-nand";
+};
+
+®_eldo2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "dvdd-csi";
+};
+
+®_eldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-mipi-lcd";
+};
+
+®_fldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdd-cpus-usb";
+};
+
+®_ldo_io0 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-ctp";
+ status = "okay";
+};
+
+®_drivevbus {
+ regulator-name = "usb0-vbus";
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
new file mode 100644
index 0000000..cc321c0
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun50i-a100-ccu.h>
+#include <dt-bindings/clock/sun50i-a100-r-ccu.h>
+#include <dt-bindings/reset/sun50i-a100-ccu.h>
+#include <dt-bindings/reset/sun50i-a100-r-ccu.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x0>;
+ enable-method = "psci";
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x1>;
+ enable-method = "psci";
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x2>;
+ enable-method = "psci";
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x3>;
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ dcxo24M: dcxo24M-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "dcxo24M";
+ #clock-cells = <0>;
+ };
+
+ iosc: internal-osc-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <16000000>;
+ clock-accuracy = <300000000>;
+ clock-output-names = "iosc";
+ #clock-cells = <0>;
+ };
+
+ osc32k: osc32k-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ #clock-cells = <0>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x3fffffff>;
+
+ ccu: clock@3001000 {
+ compatible = "allwinner,sun50i-a100-ccu";
+ reg = <0x03001000 0x1000>;
+ clocks = <&dcxo24M>, <&osc32k>, <&iosc>;
+ clock-names = "hosc", "losc", "iosc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ gic: interrupt-controller@3021000 {
+ compatible = "arm,gic-400";
+ reg = <0x03021000 0x1000>, <0x03022000 0x2000>,
+ <0x03024000 0x2000>, <0x03026000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ efuse@3006000 {
+ compatible = "allwinner,sun50i-a100-sid",
+ "allwinner,sun50i-a64-sid";
+ reg = <0x03006000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ths_calibration: calib@14 {
+ reg = <0x14 8>;
+ };
+ };
+
+ pio: pinctrl@300b000 {
+ compatible = "allwinner,sun50i-a100-pinctrl";
+ reg = <0x0300b000 0x400>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_APB1>, <&dcxo24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ uart0_pb_pins: uart0-pb-pins {
+ pins = "PB9", "PB10";
+ function = "uart0";
+ };
+ };
+
+ uart0: serial@5000000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x05000000 0x400>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
+ status = "disabled";
+ };
+
+ uart1: serial@5000400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x05000400 0x400>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
+ status = "disabled";
+ };
+
+ uart2: serial@5000800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x05000800 0x400>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
+ status = "disabled";
+ };
+
+ uart3: serial@5000c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x05000c00 0x400>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
+ status = "disabled";
+ };
+
+ uart4: serial@5001000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x05001000 0x400>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART4>;
+ resets = <&ccu RST_BUS_UART4>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@5002000 {
+ compatible = "allwinner,sun50i-a100-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x05002000 0x400>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C0>;
+ resets = <&ccu RST_BUS_I2C0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@5002400 {
+ compatible = "allwinner,sun50i-a100-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x05002400 0x400>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C1>;
+ resets = <&ccu RST_BUS_I2C1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@5002800 {
+ compatible = "allwinner,sun50i-a100-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x05002800 0x400>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C2>;
+ resets = <&ccu RST_BUS_I2C2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c3: i2c@5002c00 {
+ compatible = "allwinner,sun50i-a100-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x05002c00 0x400>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C3>;
+ resets = <&ccu RST_BUS_I2C3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ths: thermal-sensor@5070400 {
+ compatible = "allwinner,sun50i-a100-ths";
+ reg = <0x05070400 0x100>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_THS>;
+ clock-names = "bus";
+ resets = <&ccu RST_BUS_THS>;
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ #thermal-sensor-cells = <1>;
+ };
+
+ r_ccu: clock@7010000 {
+ compatible = "allwinner,sun50i-a100-r-ccu";
+ reg = <0x07010000 0x300>;
+ clocks = <&dcxo24M>, <&osc32k>, <&iosc>,
+ <&ccu CLK_PLL_PERIPH0>;
+ clock-names = "hosc", "losc", "iosc", "pll-periph";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ r_intc: interrupt-controller@7010320 {
+ compatible = "allwinner,sun50i-a100-nmi",
+ "allwinner,sun9i-a80-nmi";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x07010320 0xc>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ r_pio: pinctrl@7022000 {
+ compatible = "allwinner,sun50i-a100-r-pinctrl";
+ reg = <0x07022000 0x400>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_R_APB1>, <&dcxo24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ r_i2c0_pins: r-i2c0-pins {
+ pins = "PL0", "PL1";
+ function = "s_i2c0";
+ };
+
+ r_i2c1_pins: r-i2c1-pins {
+ pins = "PL8", "PL9";
+ function = "s_i2c1";
+ };
+ };
+
+ r_uart: serial@7080000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x07080000 0x400>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&r_ccu CLK_R_APB2_UART>;
+ resets = <&r_ccu RST_R_APB2_UART>;
+ status = "disabled";
+ };
+
+ r_i2c0: i2c@7081400 {
+ compatible = "allwinner,sun50i-a100-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x07081400 0x400>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_R_APB2_I2C0>;
+ resets = <&r_ccu RST_R_APB2_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_i2c0_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ r_i2c1: i2c@7081800 {
+ compatible = "allwinner,sun50i-a100-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x07081800 0x400>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_R_APB2_I2C1>;
+ resets = <&r_ccu RST_R_APB2_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_i2c1_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ thermal-zones {
+ cpu-thermal-zone {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 0>;
+ };
+
+ ddr-thermal-zone {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 2>;
+ };
+
+ gpu-thermal-zone {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 1>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 883f217..3ea5182 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -331,10 +331,10 @@ &sound {
"Microphone", "Microphone Jack",
"Microphone", "Onboard Microphone";
simple-audio-card,routing =
- "Left DAC", "AIF1 Slot 0 Left",
- "Right DAC", "AIF1 Slot 0 Right",
- "AIF1 Slot 0 Left ADC", "Left ADC",
- "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Left DAC", "DACL",
+ "Right DAC", "DACR",
+ "ADCL", "Left ADC",
+ "ADCR", "Right ADC",
"Headphone Jack", "HP",
"MIC2", "Microphone Jack",
"Onboard Microphone", "MBIAS",
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index fde9c7a..d894ec5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -330,10 +330,10 @@ &sound {
"Microphone", "Microphone Jack",
"Microphone", "Onboard Microphone";
simple-audio-card,routing =
- "Left DAC", "AIF1 Slot 0 Left",
- "Right DAC", "AIF1 Slot 0 Right",
- "AIF1 Slot 0 Left ADC", "Left ADC",
- "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Left DAC", "DACL",
+ "Right DAC", "DACR",
+ "ADCL", "Left ADC",
+ "ADCR", "Right ADC",
"Headphone Jack", "HP",
"MIC2", "Microphone Jack",
"Onboard Microphone", "MBIAS",
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index 2165f23..329cf27 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -261,11 +261,11 @@ &sound {
simple-audio-card,widgets = "Microphone", "Microphone Jack",
"Headphone", "Headphone Jack";
simple-audio-card,routing =
- "Left DAC", "AIF1 Slot 0 Left",
- "Right DAC", "AIF1 Slot 0 Right",
+ "Left DAC", "DACL",
+ "Right DAC", "DACR",
"Headphone Jack", "HP",
- "AIF1 Slot 0 Left ADC", "Left ADC",
- "AIF1 Slot 0 Right ADC", "Right ADC",
+ "ADCL", "Left ADC",
+ "ADCR", "Right ADC",
"MIC2", "Microphone Jack";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index 64b1c54..896f34f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -374,15 +374,15 @@ &sound {
"Headphone", "Headphone Jack",
"Speaker", "Internal Speaker";
simple-audio-card,routing =
- "Left DAC", "AIF1 Slot 0 Left",
- "Right DAC", "AIF1 Slot 0 Right",
+ "Left DAC", "DACL",
+ "Right DAC", "DACR",
"Speaker Amp INL", "LINEOUT",
"Speaker Amp INR", "LINEOUT",
"Internal Speaker", "Speaker Amp OUTL",
"Internal Speaker", "Speaker Amp OUTR",
"Headphone Jack", "HP",
- "AIF1 Slot 0 Left ADC", "Left ADC",
- "AIF1 Slot 0 Right ADC", "Right ADC",
+ "ADCL", "Left ADC",
+ "ADCR", "Right ADC",
"Internal Microphone Left", "MBIAS",
"MIC1", "Internal Microphone Left",
"Internal Microphone Right", "HBIAS",
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index 25150ab..5780713 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -392,10 +392,10 @@ &sound {
"Internal Speaker", "Speaker Amp OUTR",
"Speaker Amp INL", "LINEOUT",
"Speaker Amp INR", "LINEOUT",
- "Left DAC", "AIF1 Slot 0 Left",
- "Right DAC", "AIF1 Slot 0 Right",
- "AIF1 Slot 0 Left ADC", "Left ADC",
- "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Left DAC", "DACL",
+ "Right DAC", "DACR",
+ "ADCL", "Left ADC",
+ "ADCR", "Right ADC",
"Internal Microphone", "MBIAS",
"MIC1", "Internal Microphone",
"Headset Microphone", "HBIAS",
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
index dc4ab6b..3ab0f03 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
@@ -421,15 +421,15 @@ &sound {
"Headphone", "Headphone Jack",
"Speaker", "Internal Speaker";
simple-audio-card,routing =
- "Left DAC", "AIF1 Slot 0 Left",
- "Right DAC", "AIF1 Slot 0 Right",
+ "Left DAC", "DACL",
+ "Right DAC", "DACR",
"Speaker Amp INL", "LINEOUT",
"Speaker Amp INR", "LINEOUT",
"Internal Speaker", "Speaker Amp OUTL",
"Internal Speaker", "Speaker Amp OUTR",
"Headphone Jack", "HP",
- "AIF1 Slot 0 Left ADC", "Left ADC",
- "AIF1 Slot 0 Right ADC", "Right ADC",
+ "ADCL", "Left ADC",
+ "ADCR", "Right ADC",
"Internal Microphone Left", "MBIAS",
"MIC1", "Internal Microphone Left",
"Internal Microphone Right", "HBIAS",
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index 2f6ea9f..9ebb9e0 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -159,11 +159,11 @@ &sound {
simple-audio-card,widgets = "Microphone", "Microphone Jack",
"Headphone", "Headphone Jack";
simple-audio-card,routing =
- "Left DAC", "AIF1 Slot 0 Left",
- "Right DAC", "AIF1 Slot 0 Right",
+ "Left DAC", "DACL",
+ "Right DAC", "DACR",
"Headphone Jack", "HP",
- "AIF1 Slot 0 Left ADC", "Left ADC",
- "AIF1 Slot 0 Right ADC", "Right ADC",
+ "ADCL", "Left ADC",
+ "ADCR", "Right ADC",
"MIC2", "Microphone Jack";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index f5df5f7..a1864a8 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -340,10 +340,10 @@ &sound {
"Microphone", "Internal Microphone",
"Speaker", "Internal Speaker";
simple-audio-card,routing =
- "Left DAC", "AIF1 Slot 0 Left",
- "Right DAC", "AIF1 Slot 0 Right",
- "AIF1 Slot 0 Left ADC", "Left ADC",
- "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Left DAC", "DACL",
+ "Right DAC", "DACR",
+ "ADCL", "Left ADC",
+ "ADCR", "Right ADC",
"Headphone Jack", "HP",
"Speaker Amp INL", "LINEOUT",
"Speaker Amp INR", "LINEOUT",
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 8dfbcd14..dc23881 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -51,7 +51,7 @@ cpu0: cpu@0 {
reg = <0>;
enable-method = "psci";
next-level-cache = <&L2>;
- clocks = <&ccu 21>;
+ clocks = <&ccu CLK_CPUX>;
clock-names = "cpu";
#cooling-cells = <2>;
};
@@ -62,7 +62,7 @@ cpu1: cpu@1 {
reg = <1>;
enable-method = "psci";
next-level-cache = <&L2>;
- clocks = <&ccu 21>;
+ clocks = <&ccu CLK_CPUX>;
clock-names = "cpu";
#cooling-cells = <2>;
};
@@ -73,7 +73,7 @@ cpu2: cpu@2 {
reg = <2>;
enable-method = "psci";
next-level-cache = <&L2>;
- clocks = <&ccu 21>;
+ clocks = <&ccu CLK_CPUX>;
clock-names = "cpu";
#cooling-cells = <2>;
};
@@ -84,7 +84,7 @@ cpu3: cpu@3 {
reg = <3>;
enable-method = "psci";
next-level-cache = <&L2>;
- clocks = <&ccu 21>;
+ clocks = <&ccu CLK_CPUX>;
clock-names = "cpu";
#cooling-cells = <2>;
};
@@ -139,10 +139,10 @@ sound: sound {
simple-audio-card,mclk-fs = <128>;
simple-audio-card,aux-devs = <&codec_analog>;
simple-audio-card,routing =
- "Left DAC", "AIF1 Slot 0 Left",
- "Right DAC", "AIF1 Slot 0 Right",
- "AIF1 Slot 0 Left ADC", "Left ADC",
- "AIF1 Slot 0 Right ADC", "Right ADC";
+ "Left DAC", "DACL",
+ "Right DAC", "DACR",
+ "ADCL", "Left ADC",
+ "ADCR", "Right ADC";
status = "disabled";
cpudai: simple-audio-card,cpu {
@@ -157,6 +157,7 @@ link_codec: simple-audio-card,codec {
timer {
compatible = "arm,armv8-timer";
allwinner,erratum-unknown1;
+ arm,no-tick-in-suspend;
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14
@@ -860,7 +861,8 @@ dai: dai@1c22c00 {
codec: codec@1c22e00 {
#sound-dai-cells = <0>;
- compatible = "allwinner,sun8i-a33-codec";
+ compatible = "allwinner,sun50i-a64-codec",
+ "allwinner,sun8i-a33-codec";
reg = <0x01c22e00 0x600>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index 6735e31..10489e5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -67,6 +67,7 @@ psci {
timer {
compatible = "arm,armv8-timer";
+ arm,no-tick-in-suspend;
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
@@ -139,8 +140,7 @@ mali: gpu@1e80000 {
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gp",
"gpmmu",
"pp",
@@ -151,8 +151,7 @@ mali: gpu@1e80000 {
"pp2",
"ppmmu2",
"pp3",
- "ppmmu3",
- "pmu";
+ "ppmmu3";
clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
clock-names = "bus", "core";
resets = <&ccu RST_BUS_GPU>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 9ce78a7..28c77d6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -90,6 +90,7 @@ psci {
timer {
compatible = "arm,armv8-timer";
+ arm,no-tick-in-suspend;
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index a6fb01c..0f89398 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -145,8 +145,8 @@ gmac0: ethernet@ff800000 {
mac-address = [00 00 00 00 00 00];
resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
reset-names = "stmmaceth", "stmmaceth-ocp";
- clocks = <&clkmgr STRATIX10_EMAC0_CLK>;
- clock-names = "stmmaceth";
+ clocks = <&clkmgr STRATIX10_EMAC0_CLK>, <&clkmgr STRATIX10_EMAC_PTP_CLK>;
+ clock-names = "stmmaceth", "ptp_ref";
tx-fifo-depth = <16384>;
rx-fifo-depth = <16384>;
snps,multicast-filter-bins = <256>;
@@ -163,8 +163,8 @@ gmac1: ethernet@ff802000 {
mac-address = [00 00 00 00 00 00];
resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
reset-names = "stmmaceth", "stmmaceth-ocp";
- clocks = <&clkmgr STRATIX10_EMAC1_CLK>;
- clock-names = "stmmaceth";
+ clocks = <&clkmgr STRATIX10_EMAC1_CLK>, <&clkmgr STRATIX10_EMAC_PTP_CLK>;
+ clock-names = "stmmaceth", "ptp_ref";
tx-fifo-depth = <16384>;
rx-fifo-depth = <16384>;
snps,multicast-filter-bins = <256>;
@@ -181,8 +181,8 @@ gmac2: ethernet@ff804000 {
mac-address = [00 00 00 00 00 00];
resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
reset-names = "stmmaceth", "stmmaceth-ocp";
- clocks = <&clkmgr STRATIX10_EMAC2_CLK>;
- clock-names = "stmmaceth";
+ clocks = <&clkmgr STRATIX10_EMAC2_CLK>, <&clkmgr STRATIX10_EMAC_PTP_CLK>;
+ clock-names = "stmmaceth", "ptp_ref";
tx-fifo-depth = <16384>;
rx-fifo-depth = <16384>;
snps,multicast-filter-bins = <256>;
diff --git a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
index d5e7e2b..4eb2cd1 100644
--- a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
@@ -113,7 +113,7 @@ pmu {
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
};
- gic: gic@f0100000 {
+ gic: interrupt-controller@f0200000 {
compatible = "arm,gic-v3";
reg = <0x0 0xf0200000 0x0 0x10000>, /* GIC Dist */
<0x0 0xf0280000 0x0 0x200000>, /* GICR */
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 4e2239f..ced0394 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -8,6 +8,7 @@
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
@@ -24,6 +25,7 @@
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
index 224c890..f42cf4b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -5,8 +5,6 @@
* Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
*/
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
-
/ {
model = "Khadas VIM3";
@@ -47,69 +45,6 @@ vddcpu_b: regulator-vddcpu-b {
regulator-boot-on;
regulator-always-on;
};
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "G12B-KHADAS-VIM3";
- audio-aux-devs = <&tdmout_a>;
- audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
- "TDMOUT_A IN 1", "FRDDR_B OUT 0",
- "TDMOUT_A IN 2", "FRDDR_C OUT 0",
- "TDM_A Playback", "TDMOUT_A OUT";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- /* 8ch hdmi interface */
- dai-link-3 {
- sound-dai = <&tdmif_a>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
- };
- };
-
- /* hdmi glue */
- dai-link-4 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-};
-
-&arb {
- status = "okay";
-};
-
-&clkc_audio {
- status = "okay";
};
&cpu0 {
@@ -154,18 +89,6 @@ &cpu103 {
clock-latency = <50000>;
};
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
&pwm_ab {
pinctrl-0 = <&pwm_a_e_pins>;
pinctrl-names = "default";
@@ -182,14 +105,3 @@ &pwm_AO_cd {
status = "okay";
};
-&tdmif_a {
- status = "okay";
-};
-
-&tdmout_a {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts
new file mode 100644
index 0000000..5de2815
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+/* The Amlogic S922X Rev. C supports the same OPPs as the A311D variant */
+#include "meson-g12b-a311d.dtsi"
+#include "meson-g12b-odroid-n2.dtsi"
+
+/ {
+ compatible = "hardkernel,odroid-n2-plus", "amlogic,s922x", "amlogic,g12b";
+ model = "Hardkernel ODROID-N2Plus";
+};
+
+&vddcpu_a {
+ regulator-min-microvolt = <680000>;
+ regulator-max-microvolt = <1040000>;
+
+ pwms = <&pwm_AO_cd 1 1500 0>;
+};
+
+&vddcpu_b {
+ regulator-min-microvolt = <680000>;
+ regulator-max-microvolt = <1040000>;
+
+ pwms = <&pwm_AO_cd 1 1500 0>;
+};
+
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 34fffa6..a198a91 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -7,625 +7,9 @@
/dts-v1/;
#include "meson-g12b-s922x.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
-#include <dt-bindings/sound/meson-g12a-toacodec.h>
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+#include "meson-g12b-odroid-n2.dtsi"
/ {
compatible = "hardkernel,odroid-n2", "amlogic,s922x", "amlogic,g12b";
model = "Hardkernel ODROID-N2";
-
- aliases {
- serial0 = &uart_AO;
- ethernet0 = ðmac;
- };
-
- dioo2133: audio-amplifier-0 {
- compatible = "simple-audio-amplifier";
- enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
- VCC-supply = <&vcc_5v>;
- sound-name-prefix = "U19";
- status = "okay";
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- blue {
- label = "n2:blue";
- gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- tflash_vdd: regulator-tflash_vdd {
- compatible = "regulator-fixed";
-
- regulator-name = "TFLASH_VDD";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- };
-
- tf_io: gpio-regulator-tf_io {
- compatible = "regulator-gpio";
-
- regulator-name = "TF_IO";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
- gpios-states = <0>;
-
- states = <3300000 0>,
- <1800000 1>;
- };
-
- flash_1v8: regulator-flash_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "FLASH_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- main_12v: regulator-main_12v {
- compatible = "regulator-fixed";
- regulator-name = "12V";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- };
-
- vcc_5v: regulator-vcc_5v {
- compatible = "regulator-fixed";
- regulator-name = "5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- vin-supply = <&main_12v>;
- };
-
- vcc_1v8: regulator-vcc_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- vcc_3v3: regulator-vcc_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- /* FIXME: actually controlled by VDDCPU_B_EN */
- };
-
- vddcpu_a: regulator-vddcpu-a {
- /*
- * MP8756GD Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU_A";
- regulator-min-microvolt = <721000>;
- regulator-max-microvolt = <1022000>;
-
- vin-supply = <&main_12v>;
-
- pwms = <&pwm_ab 0 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- vddcpu_b: regulator-vddcpu-b {
- /*
- * Silergy SY8120B1ABC Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU_B";
- regulator-min-microvolt = <721000>;
- regulator-max-microvolt = <1022000>;
-
- vin-supply = <&main_12v>;
-
- pwms = <&pwm_AO_cd 1 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- hub_5v: regulator-hub_5v {
- compatible = "regulator-fixed";
- regulator-name = "HUB_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
-
- /* Connected to the Hub CHIPENABLE, LOW sets low power state */
- gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- usb_pwr_en: regulator-usb_pwr_en {
- compatible = "regulator-fixed";
- regulator-name = "USB_PWR_EN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
-
- /* Connected to the microUSB port power enable */
- gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vddao_1v8: regulator-vddao_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vddao_3v3: regulator-vddao_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&main_12v>;
- regulator-always-on;
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "G12B-ODROID-N2";
- audio-widgets = "Line", "Lineout";
- audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
- <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
- <&dioo2133>;
- audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- "TDMOUT_B IN 1", "FRDDR_B OUT 1",
- "TDMOUT_B IN 2", "FRDDR_C OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT",
- "TDMOUT_C IN 0", "FRDDR_A OUT 2",
- "TDMOUT_C IN 1", "FRDDR_B OUT 2",
- "TDMOUT_C IN 2", "FRDDR_C OUT 2",
- "TDM_C Playback", "TDMOUT_C OUT",
- "TDMIN_A IN 4", "TDM_B Loopback",
- "TDMIN_B IN 4", "TDM_B Loopback",
- "TDMIN_C IN 4", "TDM_B Loopback",
- "TDMIN_LB IN 1", "TDM_B Loopback",
- "TDMIN_A IN 5", "TDM_C Loopback",
- "TDMIN_B IN 5", "TDM_C Loopback",
- "TDMIN_C IN 5", "TDM_C Loopback",
- "TDMIN_LB IN 2", "TDM_C Loopback",
- "TODDR_A IN 0", "TDMIN_A OUT",
- "TODDR_B IN 0", "TDMIN_A OUT",
- "TODDR_C IN 0", "TDMIN_A OUT",
- "TODDR_A IN 1", "TDMIN_B OUT",
- "TODDR_B IN 1", "TDMIN_B OUT",
- "TODDR_C IN 1", "TDMIN_B OUT",
- "TODDR_A IN 2", "TDMIN_C OUT",
- "TODDR_B IN 2", "TDMIN_C OUT",
- "TODDR_C IN 2", "TDMIN_C OUT",
- "TODDR_A IN 6", "TDMIN_LB OUT",
- "TODDR_B IN 6", "TDMIN_LB OUT",
- "TODDR_C IN 6", "TDMIN_LB OUT",
- "U19 INL", "ACODEC LOLP",
- "U19 INR", "ACODEC LORP",
- "Lineout", "U19 OUTL",
- "Lineout", "U19 OUTR";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- dai-link-3 {
- sound-dai = <&toddr_a>;
- };
-
- dai-link-4 {
- sound-dai = <&toddr_b>;
- };
-
- dai-link-5 {
- sound-dai = <&toddr_c>;
- };
-
- /* 8ch hdmi interface */
- dai-link-6 {
- sound-dai = <&tdmif_b>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec-0 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
- };
-
- codec-1 {
- sound-dai = <&toacodec TOACODEC_IN_B>;
- };
- };
-
- /* i2s jack output interface */
- dai-link-7 {
- sound-dai = <&tdmif_c>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- mclk-fs = <256>;
-
- codec-0 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
- };
-
- codec-1 {
- sound-dai = <&toacodec TOACODEC_IN_C>;
- };
- };
-
- /* hdmi glue */
- dai-link-8 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
-
- /* acodec glue */
- dai-link-9 {
- sound-dai = <&toacodec TOACODEC_OUT>;
-
- codec {
- sound-dai = <&acodec>;
- };
- };
- };
-};
-
-&acodec {
- AVDD-supply = <&vddao_1v8>;
- status = "okay";
-};
-
-&arb {
- status = "okay";
-};
-
-&cec_AO {
- pinctrl-0 = <&cec_ao_a_h_pins>;
- pinctrl-names = "default";
- status = "disabled";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cecb_AO {
- pinctrl-0 = <&cec_ao_b_h_pins>;
- pinctrl-names = "default";
- status = "okay";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&clkc_audio {
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <&vddcpu_b>;
- operating-points-v2 = <&cpu_opp_table_0>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu1 {
- cpu-supply = <&vddcpu_b>;
- operating-points-v2 = <&cpu_opp_table_0>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu100 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu101 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu102 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu103 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&ext_mdio {
- external_phy: ethernet-phy@0 {
- /* Realtek RTL8211F (0x001cc916) */
- reg = <0>;
- max-speed = <1000>;
-
- reset-assert-us = <10000>;
- reset-deassert-us = <30000>;
- reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
-
- interrupt-parent = <&gpio_intc>;
- /* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-ðmac {
- pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <&external_phy>;
- amlogic,tx-delay-ns = <2>;
-};
-
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
-&gpio {
- /*
- * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
- * to be turned high in order to be detected by the USB Controller
- * This signal should be handled by a USB specific power sequence
- * in order to reset the Hub when USB bus is powered down.
- */
- usb-hub {
- gpio-hog;
- gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "usb-hub-reset";
- };
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
- pinctrl-names = "default";
- hdmi-supply = <&vcc_5v>;
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
- linux,rc-map-name = "rc-odroid";
-};
-
-&pwm_ab {
- pinctrl-0 = <&pwm_a_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin0";
- status = "okay";
-};
-
-&pwm_AO_cd {
- pinctrl-0 = <&pwm_ao_d_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin1";
- status = "okay";
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_c_pins>;
- pinctrl-1 = <&sdcard_clk_gate_c_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
- disable-wp;
-
- cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&tflash_vdd>;
- vqmmc-supply = <&tf_io>;
-
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- max-frequency = <200000000>;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&flash_1v8>;
-};
-
-/*
- * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR pins
- * and eMMC Data 4 to 7 pins.
- * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
- * and change bus-width to 4 then spifc can be enabled.
- * The SW1 slide should also be set to the correct position.
- */
-&spifc {
- status = "disabled";
- pinctrl-0 = <&nor_pins>;
- pinctrl-names = "default";
-
- mx25u64: spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <104000000>;
- };
-};
-
-&tdmif_b {
- status = "okay";
-};
-
-&tdmif_c {
- status = "okay";
-};
-
-&tdmin_a {
- status = "okay";
-};
-
-&tdmin_b {
- status = "okay";
-};
-
-&tdmin_c {
- status = "okay";
-};
-
-&tdmin_lb {
- status = "okay";
-};
-
-&tdmout_b {
- status = "okay";
-};
-
-&tdmout_c {
- status = "okay";
-};
-
-&toacodec {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
-
-&toddr_a {
- status = "okay";
-};
-
-&toddr_b {
- status = "okay";
-};
-
-&toddr_c {
- status = "okay";
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
- vbus-supply = <&usb_pwr_en>;
-};
-
-&usb2_phy0 {
- phy-supply = <&vcc_5v>;
-};
-
-&usb2_phy1 {
- /* Enable the hub which is connected to this port */
- phy-supply = <&hub_5v>;
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
new file mode 100644
index 0000000..6982632
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -0,0 +1,625 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ aliases {
+ serial0 = &uart_AO;
+ ethernet0 = ðmac;
+ };
+
+ dioo2133: audio-amplifier-0 {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+ VCC-supply = <&vcc_5v>;
+ sound-name-prefix = "U19";
+ status = "okay";
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ blue {
+ label = "n2:blue";
+ gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ tflash_vdd: regulator-tflash_vdd {
+ compatible = "regulator-fixed";
+
+ regulator-name = "TFLASH_VDD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ tf_io: gpio-regulator-tf_io {
+ compatible = "regulator-gpio";
+
+ regulator-name = "TF_IO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+
+ states = <3300000 0>,
+ <1800000 1>;
+ };
+
+ flash_1v8: regulator-flash_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "FLASH_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-always-on;
+ };
+
+ main_12v: regulator-main_12v {
+ compatible = "regulator-fixed";
+ regulator-name = "12V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ };
+
+ vcc_5v: regulator-vcc_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&main_12v>;
+ };
+
+ vcc_1v8: regulator-vcc_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-always-on;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ /* FIXME: actually controlled by VDDCPU_B_EN */
+ };
+
+ vddcpu_a: regulator-vddcpu-a {
+ /*
+ * MP8756GD Regulator.
+ */
+ compatible = "pwm-regulator";
+
+ regulator-name = "VDDCPU_A";
+ regulator-min-microvolt = <721000>;
+ regulator-max-microvolt = <1022000>;
+
+ vin-supply = <&main_12v>;
+
+ pwms = <&pwm_ab 0 1250 0>;
+ pwm-dutycycle-range = <100 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vddcpu_b: regulator-vddcpu-b {
+ /*
+ * Silergy SY8120B1ABC Regulator.
+ */
+ compatible = "pwm-regulator";
+
+ regulator-name = "VDDCPU_B";
+ regulator-min-microvolt = <721000>;
+ regulator-max-microvolt = <1022000>;
+
+ vin-supply = <&main_12v>;
+
+ pwms = <&pwm_AO_cd 1 1250 0>;
+ pwm-dutycycle-range = <100 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ hub_5v: regulator-hub_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "HUB_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_5v>;
+
+ /* Connected to the Hub CHIPENABLE, LOW sets low power state */
+ gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ usb_pwr_en: regulator-usb_pwr_en {
+ compatible = "regulator-fixed";
+ regulator-name = "USB_PWR_EN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_5v>;
+
+ /* Connected to the microUSB port power enable */
+ gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vddao_1v8: regulator-vddao_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&main_12v>;
+ regulator-always-on;
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "G12B-ODROID-N2";
+ audio-widgets = "Line", "Lineout";
+ audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
+ <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
+ <&dioo2133>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT",
+ "TDMOUT_C IN 0", "FRDDR_A OUT 2",
+ "TDMOUT_C IN 1", "FRDDR_B OUT 2",
+ "TDMOUT_C IN 2", "FRDDR_C OUT 2",
+ "TDM_C Playback", "TDMOUT_C OUT",
+ "TDMIN_A IN 4", "TDM_B Loopback",
+ "TDMIN_B IN 4", "TDM_B Loopback",
+ "TDMIN_C IN 4", "TDM_B Loopback",
+ "TDMIN_LB IN 1", "TDM_B Loopback",
+ "TDMIN_A IN 5", "TDM_C Loopback",
+ "TDMIN_B IN 5", "TDM_C Loopback",
+ "TDMIN_C IN 5", "TDM_C Loopback",
+ "TDMIN_LB IN 2", "TDM_C Loopback",
+ "TODDR_A IN 0", "TDMIN_A OUT",
+ "TODDR_B IN 0", "TDMIN_A OUT",
+ "TODDR_C IN 0", "TDMIN_A OUT",
+ "TODDR_A IN 1", "TDMIN_B OUT",
+ "TODDR_B IN 1", "TDMIN_B OUT",
+ "TODDR_C IN 1", "TDMIN_B OUT",
+ "TODDR_A IN 2", "TDMIN_C OUT",
+ "TODDR_B IN 2", "TDMIN_C OUT",
+ "TODDR_C IN 2", "TDMIN_C OUT",
+ "TODDR_A IN 6", "TDMIN_LB OUT",
+ "TODDR_B IN 6", "TDMIN_LB OUT",
+ "TODDR_C IN 6", "TDMIN_LB OUT",
+ "U19 INL", "ACODEC LOLP",
+ "U19 INR", "ACODEC LORP",
+ "Lineout", "U19 OUTL",
+ "Lineout", "U19 OUTR";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ dai-link-3 {
+ sound-dai = <&toddr_a>;
+ };
+
+ dai-link-4 {
+ sound-dai = <&toddr_b>;
+ };
+
+ dai-link-5 {
+ sound-dai = <&toddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-6 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+
+ codec-1 {
+ sound-dai = <&toacodec TOACODEC_IN_B>;
+ };
+ };
+
+ /* i2s jack output interface */
+ dai-link-7 {
+ sound-dai = <&tdmif_c>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
+ };
+
+ codec-1 {
+ sound-dai = <&toacodec TOACODEC_IN_C>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-8 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+
+ /* acodec glue */
+ dai-link-9 {
+ sound-dai = <&toacodec TOACODEC_OUT>;
+
+ codec {
+ sound-dai = <&acodec>;
+ };
+ };
+ };
+};
+
+&acodec {
+ AVDD-supply = <&vddao_1v8>;
+ status = "okay";
+};
+
+&arb {
+ status = "okay";
+};
+
+&cec_AO {
+ pinctrl-0 = <&cec_ao_a_h_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+ pinctrl-0 = <&cec_ao_b_h_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vddcpu_b>;
+ operating-points-v2 = <&cpu_opp_table_0>;
+ clocks = <&clkc CLKID_CPU_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu1 {
+ cpu-supply = <&vddcpu_b>;
+ operating-points-v2 = <&cpu_opp_table_0>;
+ clocks = <&clkc CLKID_CPU_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu100 {
+ cpu-supply = <&vddcpu_a>;
+ operating-points-v2 = <&cpub_opp_table_1>;
+ clocks = <&clkc CLKID_CPUB_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu101 {
+ cpu-supply = <&vddcpu_a>;
+ operating-points-v2 = <&cpub_opp_table_1>;
+ clocks = <&clkc CLKID_CPUB_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu102 {
+ cpu-supply = <&vddcpu_a>;
+ operating-points-v2 = <&cpub_opp_table_1>;
+ clocks = <&clkc CLKID_CPUB_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu103 {
+ cpu-supply = <&vddcpu_a>;
+ operating-points-v2 = <&cpub_opp_table_1>;
+ clocks = <&clkc CLKID_CPUB_CLK>;
+ clock-latency = <50000>;
+};
+
+&ext_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ max-speed = <1000>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_14 */
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+ðmac {
+ pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&external_phy>;
+ amlogic,tx-delay-ns = <2>;
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&gpio {
+ /*
+ * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
+ * to be turned high in order to be detected by the USB Controller
+ * This signal should be handled by a USB specific power sequence
+ * in order to reset the Hub when USB bus is powered down.
+ */
+ usb-hub {
+ gpio-hog;
+ gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb-hub-reset";
+ };
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+ pinctrl-names = "default";
+ hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+ linux,rc-map-name = "rc-odroid";
+};
+
+&pwm_ab {
+ pinctrl-0 = <&pwm_a_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin0";
+ status = "okay";
+};
+
+&pwm_AO_cd {
+ pinctrl-0 = <&pwm_ao_d_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin1";
+ status = "okay";
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_c_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <50000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&tflash_vdd>;
+ vqmmc-supply = <&tf_io>;
+
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <200000000>;
+ disable-wp;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&flash_1v8>;
+};
+
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR pins
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ * The SW1 slide should also be set to the correct position.
+ */
+&spifc {
+ status = "disabled";
+ pinctrl-0 = <&nor_pins>;
+ pinctrl-names = "default";
+
+ mx25u64: spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ };
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmif_c {
+ status = "okay";
+};
+
+&tdmin_a {
+ status = "okay";
+};
+
+&tdmin_b {
+ status = "okay";
+};
+
+&tdmin_c {
+ status = "okay";
+};
+
+&tdmin_lb {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tdmout_c {
+ status = "okay";
+};
+
+&toacodec {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
+
+&toddr_a {
+ status = "okay";
+};
+
+&toddr_b {
+ status = "okay";
+};
+
+&toddr_c {
+ status = "okay";
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb {
+ status = "okay";
+ vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy0 {
+ phy-supply = <&vcc_5v>;
+};
+
+&usb2_phy1 {
+ /* Enable the hub which is connected to this port */
+ phy-supply = <&hub_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
new file mode 100644
index 0000000..675eaa8
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+ compatible = "libretech,aml-s905x-cc-v2", "amlogic,s905x",
+ "amlogic,meson-gxl";
+ model = "Libre Computer AML-S905X-CC V2";
+
+ aliases {
+ serial0 = &uart_AO;
+ ethernet0 = ðmac;
+ spi0 = &spifc;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ panic-indicator;
+ };
+
+ led-green {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DISK_ACTIVITY;
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "disk-activity";
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ ao_5v: regulator-ao_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "AO_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_in>;
+ regulator-always-on;
+ };
+
+ dc_in: regulator-dc_in {
+ compatible = "regulator-fixed";
+ regulator-name = "DC_IN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+
+ vcck: regulator-vcck {
+ compatible = "regulator-fixed";
+ regulator-name = "VCCK";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&ao_5v>;
+ regulator-always-on;
+ };
+
+ vcc_card: regulator-vcc_card {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_CARD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddio_ao3v3>;
+
+ gpio = <&gpio GPIOCLK_1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vcc5v: regulator-vcc5v {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&ao_5v>;
+
+ gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
+ };
+
+ vddio_ao3v3: regulator-vddio_ao3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&ao_5v>;
+ regulator-always-on;
+ };
+
+
+ vddio_card: regulator-vddio-card {
+ compatible = "regulator-gpio";
+ regulator-name = "VDDIO_CARD";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+
+ states = <3300000 0>,
+ <1800000 1>;
+
+ regulator-settling-time-up-us = <200>;
+ regulator-settling-time-down-us = <50000>;
+ };
+
+ vddio_ao18: regulator-vddio_ao18 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddio_ao3v3>;
+ regulator-always-on;
+ };
+
+ vcc_1v8: regulator-vcc_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC 1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddio_ao3v3>;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "amlogic,gx-sound-card";
+ model = "GXL-LIBRETECH-S905X-CC-V2";
+ assigned-clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+ dai-format = "i2s";
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+ };
+ };
+
+ dai-link-2 {
+ sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+ codec-0 {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+
+&aiu {
+ status = "okay";
+};
+
+&cec_AO {
+ status = "okay";
+ pinctrl-0 = <&ao_cec_pins>;
+ pinctrl-names = "default";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+
+ðmac {
+ status = "okay";
+};
+
+&internal_phy {
+ pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>;
+ pinctrl-names = "default";
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ hdmi-supply = <&vcc5v>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao18>;
+};
+
+/* SD card */
+&sd_emmc_b {
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-ddr50;
+ max-frequency = <100000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+ vmmc-supply = <&vcc_card>;
+ vqmmc-supply = <&vddio_card>;
+
+ status = "okay";
+};
+
+/* eMMC */
+&sd_emmc_c {
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ max-frequency = <200000000>;
+ disable-wp;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vddio_ao3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+
+ status = "okay";
+};
+
+&spifc {
+ status = "okay";
+ pinctrl-0 = <&nor_pins>;
+ pinctrl-names = "default";
+
+ nor_4u1: spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <3000000>;
+ };
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&usb2_phy0 {
+ pinctrl-names = "default";
+ phy-supply = <&vcc5v>;
+};
+
+&usb2_phy1 {
+ phy-supply = <&vcc5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 94f75b4..7b46555 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
/ {
aliases {
@@ -41,13 +42,13 @@ leds {
led-white {
label = "vim3:white:sys";
- gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
led-red {
label = "vim3:red";
- gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>;
};
};
@@ -161,6 +162,62 @@ hdmi_connector_in: endpoint {
};
};
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "G12B-KHADAS-VIM3";
+ audio-aux-devs = <&tdmout_a>;
+ audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+ "TDMOUT_A IN 1", "FRDDR_B OUT 0",
+ "TDMOUT_A IN 2", "FRDDR_C OUT 0",
+ "TDM_A Playback", "TDMOUT_A OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_a>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+
wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
@@ -169,6 +226,14 @@ wifi32k: wifi32k {
};
};
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
&cec_AO {
pinctrl-0 = <&cec_ao_a_h_pins>;
pinctrl-names = "default";
@@ -221,6 +286,18 @@ ðmac {
amlogic,tx-delay-ns = <2>;
};
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
@@ -368,6 +445,19 @@ w25q128: spi-flash@0 {
};
};
+
+&tdmif_a {
+ status = "okay";
+};
+
+&tdmout_a {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
+
&uart_A {
status = "okay";
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index 0da56c0..4b517ca 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -32,69 +32,6 @@ vddcpu: regulator-vddcpu {
regulator-boot-on;
regulator-always-on;
};
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "SM1-KHADAS-VIM3L";
- audio-aux-devs = <&tdmout_a>;
- audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
- "TDMOUT_A IN 1", "FRDDR_B OUT 0",
- "TDMOUT_A IN 2", "FRDDR_C OUT 0",
- "TDM_A Playback", "TDMOUT_A OUT";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- /* 8ch hdmi interface */
- dai-link-3 {
- sound-dai = <&tdmif_a>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
- };
- };
-
- /* hdmi glue */
- dai-link-4 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-};
-
-&arb {
- status = "okay";
-};
-
-&clkc_audio {
- status = "okay";
};
&cpu0 {
@@ -125,18 +62,6 @@ &cpu3 {
clock-latency = <50000>;
};
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
&pwm_AO_cd {
pinctrl-0 = <&pwm_ao_d_e_pins>;
pinctrl-names = "default";
@@ -174,14 +99,3 @@ &usb {
};
*/
-&tdmif_a {
- status = "okay";
-};
-
-&tdmout_a {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
index 3feb188..a83c82c 100644
--- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -709,13 +709,13 @@ gfcgpio: gpio@1f63c000 {
dwgpio: gpio@1c024000 {
compatible = "snps,dw-apb-gpio";
reg = <0x0 0x1c024000 0x0 0x1000>;
- reg-io-width = <4>;
#address-cells = <1>;
#size-cells = <0>;
porta: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
+ #gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <0>;
};
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index 8c802d8..0f37e77 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -825,13 +825,13 @@ gfcgpio: gpio0@1701c000 {
dwgpio: gpio@1c024000 {
compatible = "snps,dw-apb-gpio";
reg = <0x0 0x1c024000 0x0 0x1000>;
- reg-io-width = <4>;
#address-cells = <1>;
#size-cells = <0>;
porta: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
+ #gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <0>;
};
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index eeee51f..40d95c5 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -251,7 +251,7 @@ wdt@f0000 {
reg = <0x0f0000 0x10000>;
interrupts = <7>;
clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
- clock-names = "wdogclk", "apb_pclk";
+ clock-names = "wdog_clk", "apb_pclk";
};
v2m_timer01: timer@110000 {
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
index 001a0a3..4c4a381 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -195,7 +195,7 @@ wdt@f0000 {
reg = <0x0f0000 0x1000>;
interrupts = <0>;
clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
- clock-names = "wdogclk", "apb_pclk";
+ clock-names = "wdog_clk", "apb_pclk";
};
v2m_timer01: timer@110000 {
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 3980206..2cfeaf3 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -576,7 +576,7 @@ wdt0: watchdog@66090000 {
reg = <0x66090000 0x1000>;
interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>, <&iprocslow>;
- clock-names = "wdogclk", "apb_pclk";
+ clock-names = "wdog_clk", "apb_pclk";
};
gpio_g: gpio@660a0000 {
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
index a9b92e5..43aa5e9 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -151,7 +151,7 @@ &enet {
};
&nand {
- status = "ok";
+ status = "okay";
nandcs@0 {
compatible = "brcm,nandcs";
reg = <0>;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 0098dfd..b425b12 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -438,7 +438,7 @@ wdt0: watchdog@c0000 {
reg = <0x000c0000 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>;
- clock-names = "wdogclk", "apb_pclk";
+ clock-names = "wdog_clk", "apb_pclk";
timeout-sec = <60>;
};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 24aab3e..829fea2 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -87,8 +87,8 @@ homepage-key {
i2c_max98504: i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
- &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
+ sda-gpios = <&gpd0 1 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpd0 0 GPIO_ACTIVE_HIGH>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 74ac4ac..8eb4576 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -1015,17 +1015,17 @@ hdmiphy: hdmiphy@13af0000 {
};
syscon_disp: syscon@13b80000 {
- compatible = "syscon";
+ compatible = "samsung,exynos5433-sysreg", "syscon";
reg = <0x13b80000 0x1010>;
};
syscon_cam0: syscon@120f0000 {
- compatible = "syscon";
+ compatible = "samsung,exynos5433-sysreg", "syscon";
reg = <0x120f0000 0x1020>;
};
syscon_cam1: syscon@145f0000 {
- compatible = "syscon";
+ compatible = "samsung,exynos5433-sysreg", "syscon";
reg = <0x145f0000 0x1038>;
};
@@ -1087,7 +1087,7 @@ gpu: gpu@14ac0000 {
operating-points-v2 = <&gpu_opp_table>;
status = "disabled";
- gpu_opp_table: opp_table {
+ gpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-160000000 {
@@ -1460,10 +1460,6 @@ i2s1: i2s@14d60000 {
<&cmu_peric CLK_SCLK_I2S1>;
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
#clock-cells = <1>;
- samsung,supports-6ch;
- samsung,supports-rstclr;
- samsung,supports-tdm;
- samsung,supports-low-rfs;
#sound-dai-cells = <1>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 903c0eb..f8d5943 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -30,12 +30,17 @@
dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts
index 9927b09..242f4b0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts
@@ -87,7 +87,7 @@ &i2c1 {
status = "okay";
};
-&pcie {
+&pcie1 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index ff19ec4..6a2c091 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -1,8 +1,9 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Device Tree Include file for Freescale Layerscape-1012A family SoC.
+ * Device Tree Include file for NXP Layerscape-1012A family SoC.
*
* Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2019-2020 NXP
*
*/
@@ -489,7 +490,7 @@ msi: msi-controller1@1572000 {
interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
};
- pcie: pcie@3400000 {
+ pcie1: pcie@3400000 {
compatible = "fsl,ls1012a-pcie";
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index 4b4cc6a..d66d8b2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -11,11 +11,29 @@
/dts-v1/;
#include "fsl-ls1028a-kontron-sl28-var4.dts"
+#include <dt-bindings/leds/common.h>
/ {
model = "Kontron KBox A-230-LS";
compatible = "kontron,kbox-a-230-ls", "kontron,sl28-var4",
"kontron,sl28", "fsl,ls1028a";
+
+ leds {
+ compatible = "gpio-leds";
+
+ alarm-led {
+ function = LED_FUNCTION_ALARM;
+ color = <LED_COLOR_ID_YELLOW>;
+ gpios = <&sl28cpld_gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ power-led {
+ linux,default-trigger = "default-on";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&sl28cpld_gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&enetc_mdio_pf3 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
index 0973a6a..c45d7b4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
@@ -15,6 +15,15 @@ / {
compatible = "kontron,sl28-var3-ads2", "kontron,sl28-var3",
"kontron,sl28", "fsl,ls1028a";
+ pwm-fan {
+ compatible = "pwm-fan";
+ cooling-min-state = <0>;
+ cooling-max-state = <3>;
+ #cooling-cells = <2>;
+ pwms = <&sl28cpld_pwm0 0 4000000>;
+ cooling-levels = <1 128 192 255>;
+ };
+
sound {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index 852dad8..f46eb47 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -8,6 +8,9 @@
/dts-v1/;
#include "fsl-ls1028a.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Kontron SMARC-sAL28";
@@ -22,6 +25,36 @@ aliases {
spi1 = &dspi2;
};
+ buttons0 {
+ compatible = "gpio-keys";
+
+ power-button {
+ interrupts-extended = <&sl28cpld_intc
+ 4 IRQ_TYPE_EDGE_BOTH>;
+ linux,code = <KEY_POWER>;
+ label = "Power";
+ };
+
+ sleep-button {
+ interrupts-extended = <&sl28cpld_intc
+ 5 IRQ_TYPE_EDGE_BOTH>;
+ linux,code = <KEY_SLEEP>;
+ label = "Sleep";
+ };
+ };
+
+ buttons1 {
+ compatible = "gpio-keys-polled";
+ poll-interval = <200>;
+
+ lid-switch {
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ gpios = <&sl28cpld_gpio3 4 GPIO_ACTIVE_LOW>;
+ label = "Lid";
+ };
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
@@ -166,6 +199,107 @@ rtc@32 {
reg = <0x32>;
};
+ sl28cpld@4a {
+ compatible = "kontron,sl28cpld";
+ reg = <0x4a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ watchdog@4 {
+ compatible = "kontron,sl28cpld-wdt";
+ reg = <0x4>;
+ kontron,assert-wdt-timeout-pin;
+ };
+
+ hwmon@b {
+ compatible = "kontron,sl28cpld-fan";
+ reg = <0xb>;
+ };
+
+ sl28cpld_pwm0: pwm@c {
+ compatible = "kontron,sl28cpld-pwm";
+ reg = <0xc>;
+ #pwm-cells = <2>;
+ };
+
+ sl28cpld_pwm1: pwm@e {
+ compatible = "kontron,sl28cpld-pwm";
+ reg = <0xe>;
+ #pwm-cells = <2>;
+ };
+
+ sl28cpld_gpio0: gpio@10 {
+ compatible = "kontron,sl28cpld-gpio";
+ reg = <0x10>;
+ interrupts-extended = <&gpio2 6
+ IRQ_TYPE_EDGE_FALLING>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "GPIO0_CAM0_PWR_N", "GPIO1_CAM1_PWR_N",
+ "GPIO2_CAM0_RST_N", "GPIO3_CAM1_RST_N",
+ "GPIO4_HDA_RST_N", "GPIO5_PWM_OUT",
+ "GPIO6_TACHIN", "GPIO7";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sl28cpld_gpio1: gpio@15 {
+ compatible = "kontron,sl28cpld-gpio";
+ reg = <0x15>;
+ interrupts-extended = <&gpio2 6
+ IRQ_TYPE_EDGE_FALLING>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "GPIO8", "GPIO9", "GPIO10", "GPIO11",
+ "", "", "", "";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sl28cpld_gpio2: gpio@1a {
+ compatible = "kontron,sl28cpld-gpo";
+ reg = <0x1a>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "LCD0 voltage enable",
+ "LCD0 backlight enable",
+ "eMMC reset", "LVDS bridge reset",
+ "LVDS bridge power-down",
+ "SDIO power enable",
+ "", "";
+ };
+
+ sl28cpld_gpio3: gpio@1b {
+ compatible = "kontron,sl28cpld-gpi";
+ reg = <0x1b>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "Power button", "Force recovery", "Sleep",
+ "Battery low", "Lid state", "Charging",
+ "Charger present", "";
+ };
+
+ sl28cpld_intc: interrupt-controller@1c {
+ compatible = "kontron,sl28cpld-intc";
+ reg = <0x1c>;
+ interrupts-extended = <&gpio2 6
+ IRQ_TYPE_EDGE_FALLING>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index e4f00c2..13cdc95 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -313,6 +313,10 @@ &enetc_port1 {
status = "okay";
};
+&lpuart0 {
+ status = "okay";
+};
+
&sai1 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 0efeb8f..73e4f94 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -2,7 +2,7 @@
/*
* Device Tree Include file for NXP Layerscape-1028A family SoC.
*
- * Copyright 2018 NXP
+ * Copyright 2018-2020 NXP
*
* Harninder Rai <harninder.rai@nxp.com>
*
@@ -553,7 +553,7 @@ sata: sata@3200000 {
status = "disabled";
};
- pcie@3400000 {
+ pcie1: pcie@3400000 {
compatible = "fsl,ls1028a-pcie";
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x80 0x00000000 0x0 0x00002000>; /* configuration space */
@@ -580,7 +580,7 @@ pcie@3400000 {
status = "disabled";
};
- pcie@3500000 {
+ pcie2: pcie@3500000 {
compatible = "fsl,ls1028a-pcie";
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x88 0x00000000 0x0 0x00002000>; /* configuration space */
@@ -722,14 +722,14 @@ cluster1_core0_watchdog: watchdog@c000000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
clocks = <&clockgen 4 15>, <&clockgen 4 15>;
- clock-names = "apb_pclk", "wdog_clk";
+ clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core1_watchdog: watchdog@c010000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
clocks = <&clockgen 4 15>, <&clockgen 4 15>;
- clock-names = "apb_pclk", "wdog_clk";
+ clock-names = "wdog_clk", "apb_pclk";
};
sai1: audio-controller@f100000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 5c2e370..0464b8a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -1,9 +1,9 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ * Device Tree Include file for NXP Layerscape-1043A family SoC.
*
* Copyright 2014-2015 Freescale Semiconductor, Inc.
- * Copyright 2018 NXP
+ * Copyright 2018, 2020 NXP
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*/
@@ -814,7 +814,7 @@ msi3: msi-controller3@1573000 {
interrupts = <0 160 0x4>;
};
- pcie@3400000 {
+ pcie1: pcie@3400000 {
compatible = "fsl,ls1043a-pcie";
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
@@ -840,7 +840,7 @@ pcie@3400000 {
status = "disabled";
};
- pcie@3500000 {
+ pcie2: pcie@3500000 {
compatible = "fsl,ls1043a-pcie";
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x48 0x00000000 0x0 0x00002000>; /* configuration space */
@@ -866,7 +866,7 @@ pcie@3500000 {
status = "disabled";
};
- pcie@3600000 {
+ pcie3: pcie@3600000 {
compatible = "fsl,ls1043a-pcie";
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
0x50 0x00000000 0x0 0x00002000>; /* configuration space */
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 0246d97..1fa39ba 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -1,9 +1,9 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ * Device Tree Include file for NXP Layerscape-1046A family SoC.
*
* Copyright 2016 Freescale Semiconductor, Inc.
- * Copyright 2018 NXP
+ * Copyright 2018, 2020 NXP
*
* Mingkai Hu <mingkai.hu@nxp.com>
*/
@@ -718,7 +718,7 @@ msi3: msi-controller@15a0000 {
<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
};
- pcie@3400000 {
+ pcie1: pcie@3400000 {
compatible = "fsl,ls1046a-pcie";
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
@@ -744,7 +744,7 @@ pcie@3400000 {
status = "disabled";
};
- pcie_ep@3400000 {
+ pcie_ep1: pcie_ep@3400000 {
compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
reg = <0x00 0x03400000 0x0 0x00100000
0x40 0x00000000 0x8 0x00000000>;
@@ -754,7 +754,7 @@ pcie_ep@3400000 {
status = "disabled";
};
- pcie@3500000 {
+ pcie2: pcie@3500000 {
compatible = "fsl,ls1046a-pcie";
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x48 0x00000000 0x0 0x00002000>; /* configuration space */
@@ -780,7 +780,7 @@ pcie@3500000 {
status = "disabled";
};
- pcie_ep@3500000 {
+ pcie_ep2: pcie_ep@3500000 {
compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
reg = <0x00 0x03500000 0x0 0x00100000
0x48 0x00000000 0x8 0x00000000>;
@@ -790,7 +790,7 @@ pcie_ep@3500000 {
status = "disabled";
};
- pcie@3600000 {
+ pcie3: pcie@3600000 {
compatible = "fsl,ls1046a-pcie";
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
0x50 0x00000000 0x0 0x00002000>; /* configuration space */
@@ -816,7 +816,7 @@ pcie@3600000 {
status = "disabled";
};
- pcie_ep@3600000 {
+ pcie_ep3: pcie_ep@3600000 {
compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep";
reg = <0x00 0x03600000 0x0 0x00100000
0x50 0x00000000 0x8 0x00000000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 169f474..ff58052 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -2,7 +2,7 @@
/*
* Device Tree Include file for NXP Layerscape-1088A family SoC.
*
- * Copyright 2017 NXP
+ * Copyright 2017-2020 NXP
*
* Harninder Rai <harninder.rai@nxp.com>
*
@@ -130,19 +130,19 @@ its: gic-its@6020000 {
};
thermal-zones {
- cpu_thermal: cpu-thermal {
+ core-cluster {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 0>;
trips {
- cpu_alert: cpu-alert {
+ core_cluster_alert: core-cluster-alert {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit: cpu-crit {
+ core-cluster-crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
@@ -151,7 +151,7 @@ cpu_crit: cpu-crit {
cooling-maps {
map0 {
- trip = <&cpu_alert>;
+ trip = <&core_cluster_alert>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -164,6 +164,20 @@ map0 {
};
};
};
+
+ soc {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 1>;
+
+ trips {
+ soc-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
};
timer {
@@ -210,45 +224,49 @@ tmu: tmu@1f80000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f80000 0x0 0x10000>;
interrupts = <0 23 0x4>;
- fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
fsl,tmu-calibration =
/* Calibration data group 1 */
- <0x00000000 0x00000026
- 0x00000001 0x0000002d
- 0x00000002 0x00000032
- 0x00000003 0x00000039
- 0x00000004 0x0000003f
- 0x00000005 0x00000046
- 0x00000006 0x0000004d
- 0x00000007 0x00000054
- 0x00000008 0x0000005a
- 0x00000009 0x00000061
- 0x0000000a 0x0000006a
- 0x0000000b 0x00000071
+ <0x00000000 0x00000023
+ 0x00000001 0x0000002a
+ 0x00000002 0x00000030
+ 0x00000003 0x00000037
+ 0x00000004 0x0000003d
+ 0x00000005 0x00000044
+ 0x00000006 0x0000004a
+ 0x00000007 0x00000051
+ 0x00000008 0x00000057
+ 0x00000009 0x0000005e
+ 0x0000000a 0x00000064
+ 0x0000000b 0x0000006b
/* Calibration data group 2 */
- 0x00010000 0x00000025
- 0x00010001 0x0000002c
- 0x00010002 0x00000035
- 0x00010003 0x0000003d
- 0x00010004 0x00000045
- 0x00010005 0x0000004e
- 0x00010006 0x00000057
- 0x00010007 0x00000061
- 0x00010008 0x0000006b
- 0x00010009 0x00000076
+ 0x00010000 0x00000022
+ 0x00010001 0x0000002a
+ 0x00010002 0x00000032
+ 0x00010003 0x0000003a
+ 0x00010004 0x00000042
+ 0x00010005 0x0000004a
+ 0x00010006 0x00000052
+ 0x00010007 0x0000005a
+ 0x00010008 0x00000062
+ 0x00010009 0x0000006a
/* Calibration data group 3 */
- 0x00020000 0x00000029
- 0x00020001 0x00000033
- 0x00020002 0x0000003d
- 0x00020003 0x00000049
- 0x00020004 0x00000056
- 0x00020005 0x00000061
- 0x00020006 0x0000006d
+ 0x00020000 0x00000021
+ 0x00020001 0x0000002b
+ 0x00020002 0x00000035
+ 0x00020003 0x00000040
+ 0x00020004 0x0000004a
+ 0x00020005 0x00000054
+ 0x00020006 0x0000005e
/* Calibration data group 4 */
- 0x00030000 0x00000021
- 0x00030001 0x0000002a
- 0x00030002 0x0000003c
- 0x00030003 0x0000004e>;
+ 0x00030000 0x00000010
+ 0x00030001 0x0000001c
+ 0x00030002 0x00000027
+ 0x00030003 0x00000032
+ 0x00030004 0x0000003e
+ 0x00030005 0x00000049
+ 0x00030006 0x00000054
+ 0x00030007 0x00000060>;
little-endian;
#thermal-sensor-cells = <1>;
};
@@ -473,7 +491,7 @@ sec_jr3: jr@40000 {
};
};
- pcie@3400000 {
+ pcie1: pcie@3400000 {
compatible = "fsl,ls1088a-pcie";
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x20 0x00000000 0x0 0x00002000>; /* configuration space */
@@ -499,7 +517,7 @@ pcie@3400000 {
status = "disabled";
};
- pcie@3500000 {
+ pcie2: pcie@3500000 {
compatible = "fsl,ls1088a-pcie";
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x28 0x00000000 0x0 0x00002000>; /* configuration space */
@@ -525,7 +543,7 @@ pcie@3500000 {
status = "disabled";
};
- pcie@3600000 {
+ pcie3: pcie@3600000 {
compatible = "fsl,ls1088a-pcie";
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
0x30 0x00000000 0x0 0x00002000>; /* configuration space */
@@ -657,57 +675,57 @@ ptp-timer@8b95000 {
cluster1_core0_watchdog: wdt@c000000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
+ clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core1_watchdog: wdt@c010000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
+ clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core2_watchdog: wdt@c020000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc020000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
+ clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core3_watchdog: wdt@c030000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc030000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
+ clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core0_watchdog: wdt@c100000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc100000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
+ clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core1_watchdog: wdt@c110000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc110000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
+ clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core2_watchdog: wdt@c120000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc120000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
+ clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core3_watchdog: wdt@c130000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc130000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
+ clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clock-names = "wdog_clk", "apb_pclk";
};
fsl_mc: fsl-mc@80c000000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 41102da..bf72918 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -79,20 +79,62 @@ reboot {
};
thermal-zones {
- cpu_thermal: cpu-thermal {
+ ddr-controller1 {
polling-delay-passive = <1000>;
polling-delay = <5000>;
+ thermal-sensors = <&tmu 1>;
+ trips {
+ ddr-ctrler1-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ ddr-controller2 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 2>;
+
+ trips {
+ ddr-ctrler2-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ ddr-controller3 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 3>;
+
+ trips {
+ ddr-ctrler3-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ core-cluster1 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
thermal-sensors = <&tmu 4>;
trips {
- cpu_alert: cpu-alert {
- temperature = <75000>;
+ core_cluster1_alert: core-cluster1-alert {
+ temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit: cpu-crit {
- temperature = <85000>;
+
+ core-cluster1-crit {
+ temperature = <95000>;
hysteresis = <2000>;
type = "critical";
};
@@ -100,14 +142,95 @@ cpu_crit: cpu-crit {
cooling-maps {
map0 {
- trip = <&cpu_alert>;
+ trip = <&core_cluster1_alert>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ core-cluster2 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 5>;
+
+ trips {
+ core_cluster2_alert: core-cluster2-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ core-cluster2-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&core_cluster2_alert>;
+ cooling-device =
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ core-cluster3 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 6>;
+
+ trips {
+ core_cluster3_alert: core-cluster3-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ core-cluster3-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&core_cluster3_alert>;
+ cooling-device =
<&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ core-cluster4 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 7>;
+
+ trips {
+ core_cluster4_alert: core-cluster4-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ core-cluster4-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&core_cluster4_alert>;
+ cooling-device =
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
@@ -231,56 +354,56 @@ cluster1_core0_watchdog: wdt@c000000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
+ clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core1_watchdog: wdt@c010000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
+ clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core0_watchdog: wdt@c100000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc100000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
+ clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core1_watchdog: wdt@c110000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc110000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
+ clock-names = "wdog_clk", "apb_pclk";
};
cluster3_core0_watchdog: wdt@c200000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc200000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
+ clock-names = "wdog_clk", "apb_pclk";
};
cluster3_core1_watchdog: wdt@c210000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc210000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
+ clock-names = "wdog_clk", "apb_pclk";
};
cluster4_core0_watchdog: wdt@c300000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc300000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
+ clock-names = "wdog_clk", "apb_pclk";
};
cluster4_core1_watchdog: wdt@c310000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc310000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
+ clock-names = "wdog_clk", "apb_pclk";
};
crypto: crypto@8000000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index d247e42..83072da6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -1011,7 +1011,7 @@ sata3: sata@3230000 {
status = "disabled";
};
- pcie@3400000 {
+ pcie1: pcie@3400000 {
compatible = "fsl,lx2160a-pcie";
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x80 0x00000000 0x0 0x00002000>; /* configuration space */
@@ -1039,7 +1039,7 @@ pcie@3400000 {
status = "disabled";
};
- pcie@3500000 {
+ pcie2: pcie@3500000 {
compatible = "fsl,lx2160a-pcie";
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x88 0x00000000 0x0 0x00002000>; /* configuration space */
@@ -1067,7 +1067,7 @@ pcie@3500000 {
status = "disabled";
};
- pcie@3600000 {
+ pcie3: pcie@3600000 {
compatible = "fsl,lx2160a-pcie";
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
0x90 0x00000000 0x0 0x00002000>; /* configuration space */
@@ -1095,7 +1095,7 @@ pcie@3600000 {
status = "disabled";
};
- pcie@3700000 {
+ pcie4: pcie@3700000 {
compatible = "fsl,lx2160a-pcie";
reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
0x98 0x00000000 0x0 0x00002000>; /* configuration space */
@@ -1123,7 +1123,7 @@ pcie@3700000 {
status = "disabled";
};
- pcie@3800000 {
+ pcie5: pcie@3800000 {
compatible = "fsl,lx2160a-pcie";
reg = <0x00 0x03800000 0x0 0x00100000 /* controller registers */
0xa0 0x00000000 0x0 0x00002000>; /* configuration space */
@@ -1151,7 +1151,7 @@ pcie@3800000 {
status = "disabled";
};
- pcie@3900000 {
+ pcie6: pcie@3900000 {
compatible = "fsl,lx2160a-pcie";
reg = <0x00 0x03900000 0x0 0x00100000 /* controller registers */
0xa8 0x00000000 0x0 0x00002000>; /* configuration space */
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index baa5f99..d6b9ded 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -10,19 +10,19 @@ leds {
led0 {
label = "gen_led0";
gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
- default-state = "none";
+ default-state = "off";
};
led1 {
label = "gen_led1";
gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
- default-state = "none";
+ default-state = "off";
};
led2 {
label = "gen_led2";
gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
- default-state = "none";
+ default-state = "off";
};
led3 {
@@ -70,7 +70,7 @@ sound {
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_espi2>;
- cs-gpios = <&gpio5 9 0>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
status = "okay";
eeprom@0 {
@@ -210,7 +210,7 @@ MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x41
>;
};
- pinctrl_pcal6414: pcal6414-gpio {
+ pinctrl_pcal6414: pcal6414-gpiogrp {
fsl,pins = <
MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19
>;
@@ -240,7 +240,7 @@ MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x40
>;
};
- pinctrl_usdhc2_gpio: usdhc2grpgpio {
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x41
MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
@@ -259,7 +259,7 @@ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
>;
};
- pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
@@ -271,7 +271,7 @@ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
>;
};
- pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index 94911b1..6de86a4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -74,12 +74,12 @@ pmic@4b {
reg = <0x4b>;
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio1>;
- interrupts = <3 GPIO_ACTIVE_LOW>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
regulators {
buck1_reg: BUCK1 {
- regulator-name = "BUCK1";
+ regulator-name = "buck1";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
@@ -88,7 +88,7 @@ buck1_reg: BUCK1 {
};
buck2_reg: BUCK2 {
- regulator-name = "BUCK2";
+ regulator-name = "buck2";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
@@ -100,7 +100,7 @@ buck2_reg: BUCK2 {
buck3_reg: BUCK3 {
// BUCK5 in datasheet
- regulator-name = "BUCK3";
+ regulator-name = "buck3";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1350000>;
regulator-boot-on;
@@ -109,7 +109,7 @@ buck3_reg: BUCK3 {
buck4_reg: BUCK4 {
// BUCK6 in datasheet
- regulator-name = "BUCK4";
+ regulator-name = "buck4";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -118,7 +118,7 @@ buck4_reg: BUCK4 {
buck5_reg: BUCK5 {
// BUCK7 in datasheet
- regulator-name = "BUCK5";
+ regulator-name = "buck5";
regulator-min-microvolt = <1605000>;
regulator-max-microvolt = <1995000>;
regulator-boot-on;
@@ -127,7 +127,7 @@ buck5_reg: BUCK5 {
buck6_reg: BUCK6 {
// BUCK8 in datasheet
- regulator-name = "BUCK6";
+ regulator-name = "buck6";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
@@ -135,7 +135,7 @@ buck6_reg: BUCK6 {
};
ldo1_reg: LDO1 {
- regulator-name = "LDO1";
+ regulator-name = "ldo1";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -143,7 +143,7 @@ ldo1_reg: LDO1 {
};
ldo2_reg: LDO2 {
- regulator-name = "LDO2";
+ regulator-name = "ldo2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
@@ -151,7 +151,7 @@ ldo2_reg: LDO2 {
};
ldo3_reg: LDO3 {
- regulator-name = "LDO3";
+ regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -159,7 +159,7 @@ ldo3_reg: LDO3 {
};
ldo4_reg: LDO4 {
- regulator-name = "LDO4";
+ regulator-name = "ldo4";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@@ -167,7 +167,7 @@ ldo4_reg: LDO4 {
};
ldo6_reg: LDO6 {
- regulator-name = "LDO6";
+ regulator-name = "ldo6";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@@ -184,7 +184,7 @@ &i2c3 {
status = "okay";
eeprom@50 {
- compatible = "microchip, at24c64d", "atmel,24c64";
+ compatible = "microchip,24c64", "atmel,24c64";
pagesize = <32>;
read-only; /* Manufacturing EEPROM programmed at factory */
reg = <0x50>;
@@ -290,9 +290,9 @@ MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
>;
};
- pinctrl_pmic: pmicirq {
+ pinctrl_pmic: pmicirqgrp {
fsl,pins = <
- MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
+ MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141
>;
};
@@ -309,7 +309,7 @@ MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x141
>;
};
- pinctrl_usdhc1_gpio: usdhc1grpgpio {
+ pinctrl_usdhc1_gpio: usdhc1gpiogrp {
fsl,pins = <
MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41
>;
@@ -326,7 +326,7 @@ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
>;
};
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194
MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4
@@ -337,7 +337,7 @@ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4
>;
};
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196
MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6
@@ -364,7 +364,7 @@ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
@@ -380,7 +380,7 @@ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
new file mode 100644
index 0000000..6c079c0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mm-evk.dtsi"
+
+/ {
+ model = "FSL i.MX8MM DDR4 EVK with CYW43455 WIFI/BT board";
+ compatible = "fsl,imx8mm-ddr4-evk", "fsl,imx8mm";
+
+ leds {
+ pinctrl-0 = <&pinctrl_gpio_led_2>;
+
+ status {
+ gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_gpmi_nand: gpmi-nand {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_ALE_RAWNAND_ALE 0x00000096
+ MX8MM_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B 0x00000096
+ MX8MM_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B 0x00000096
+ MX8MM_IOMUXC_NAND_CLE_RAWNAND_CLE 0x00000096
+ MX8MM_IOMUXC_NAND_DATA00_RAWNAND_DATA00 0x00000096
+ MX8MM_IOMUXC_NAND_DATA01_RAWNAND_DATA01 0x00000096
+ MX8MM_IOMUXC_NAND_DATA02_RAWNAND_DATA02 0x00000096
+ MX8MM_IOMUXC_NAND_DATA03_RAWNAND_DATA03 0x00000096
+ MX8MM_IOMUXC_NAND_DATA04_RAWNAND_DATA04 0x00000096
+ MX8MM_IOMUXC_NAND_DATA05_RAWNAND_DATA05 0x00000096
+ MX8MM_IOMUXC_NAND_DATA06_RAWNAND_DATA06 0x00000096
+ MX8MM_IOMUXC_NAND_DATA07_RAWNAND_DATA07 0x00000096
+ MX8MM_IOMUXC_NAND_RE_B_RAWNAND_RE_B 0x00000096
+ MX8MM_IOMUXC_NAND_READY_B_RAWNAND_READY_B 0x00000056
+ MX8MM_IOMUXC_NAND_WE_B_RAWNAND_WE_B 0x00000096
+ MX8MM_IOMUXC_NAND_WP_B_RAWNAND_WP_B 0x00000096
+ >;
+ };
+
+ pinctrl_gpio_led_2: gpioled2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index 0f1d7f8..4e2820d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -1,97 +1,20 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright 2019 NXP
+ * Copyright 2019-2020 NXP
*/
/dts-v1/;
#include <dt-bindings/usb/pd.h>
-#include "imx8mm.dtsi"
+#include "imx8mm-evk.dtsi"
/ {
model = "FSL i.MX8MM EVK board";
compatible = "fsl,imx8mm-evk", "fsl,imx8mm";
- chosen {
- stdout-path = &uart2;
+ aliases {
+ spi0 = &flexspi;
};
-
- memory@40000000 {
- device_type = "memory";
- reg = <0x0 0x40000000 0 0x80000000>;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_led>;
-
- status {
- label = "status";
- gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-
- reg_usdhc2_vmmc: regulator-usdhc2 {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
- regulator-name = "VSD_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- wm8524: audio-codec {
- #sound-dai-cells = <0>;
- compatible = "wlf,wm8524";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_wlf>;
- wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
- };
-
- sound-wm8524 {
- compatible = "simple-audio-card";
- simple-audio-card,name = "wm8524-audio";
- simple-audio-card,format = "i2s";
- simple-audio-card,frame-master = <&cpudai>;
- simple-audio-card,bitclock-master = <&cpudai>;
- simple-audio-card,widgets =
- "Line", "Left Line Out Jack",
- "Line", "Right Line Out Jack";
- simple-audio-card,routing =
- "Left Line Out Jack", "LINEVOUTL",
- "Right Line Out Jack", "LINEVOUTR";
-
- cpudai: simple-audio-card,cpu {
- sound-dai = <&sai3>;
- dai-tdm-slot-num = <2>;
- dai-tdm-slot-width = <32>;
- };
-
- simple-audio-card,codec {
- sound-dai = <&wm8524>;
- clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
- };
- };
-};
-
-&A53_0 {
- cpu-supply = <&buck2_reg>;
-};
-
-&A53_1 {
- cpu-supply = <&buck2_reg>;
-};
-
-&A53_2 {
- cpu-supply = <&buck2_reg>;
-};
-
-&A53_3 {
- cpu-supply = <&buck2_reg>;
};
&ddrc {
@@ -114,238 +37,22 @@ opp-750M {
};
};
-&fec1 {
+&flexspi {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1>;
- phy-mode = "rgmii-id";
- phy-handle = <ðphy0>;
- phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <10>;
- fsl,magic-packet;
+ pinctrl-0 = <&pinctrl_flexspi>;
status = "okay";
- mdio {
+ flash@0 {
+ reg = <0>;
#address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <80000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
};
};
-&i2c1 {
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- status = "okay";
-
- pmic@4b {
- compatible = "rohm,bd71847";
- reg = <0x4b>;
- pinctrl-0 = <&pinctrl_pmic>;
- interrupt-parent = <&gpio1>;
- interrupts = <3 GPIO_ACTIVE_LOW>;
- rohm,reset-snvs-powered;
-
- regulators {
- buck1_reg: BUCK1 {
- regulator-name = "BUCK1";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1300000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <1250>;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "BUCK2";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1300000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <1250>;
- rohm,dvs-run-voltage = <1000000>;
- rohm,dvs-idle-voltage = <900000>;
- };
-
- buck3_reg: BUCK3 {
- // BUCK5 in datasheet
- regulator-name = "BUCK3";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1350000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck4_reg: BUCK4 {
- // BUCK6 in datasheet
- regulator-name = "BUCK4";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck5_reg: BUCK5 {
- // BUCK7 in datasheet
- regulator-name = "BUCK5";
- regulator-min-microvolt = <1605000>;
- regulator-max-microvolt = <1995000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck6_reg: BUCK6 {
- // BUCK8 in datasheet
- regulator-name = "BUCK6";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo1_reg: LDO1 {
- regulator-name = "LDO1";
- regulator-min-microvolt = <1600000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "LDO2";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <900000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "LDO3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "LDO4";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "LDO6";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
-};
-
-&i2c2 {
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
-
- ptn5110: tcpc@50 {
- compatible = "nxp,ptn5110";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_typec1>;
- reg = <0x50>;
- interrupt-parent = <&gpio2>;
- interrupts = <11 8>;
- status = "okay";
-
- port {
- typec1_dr_sw: endpoint {
- remote-endpoint = <&usb1_drd_sw>;
- };
- };
-
- typec1_con: connector {
- compatible = "usb-c-connector";
- label = "USB-C";
- power-role = "dual";
- data-role = "dual";
- try-power-role = "sink";
- source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
- sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
- PDO_VAR(5000, 20000, 3000)>;
- op-sink-microwatt = <15000000>;
- self-powered;
- };
- };
-};
-
-&i2c3 {
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- status = "okay";
-
- pca6416: gpio@20 {
- compatible = "ti,tca6416";
- reg = <0x20>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-};
-
-&sai3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sai3>;
- assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
- assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
- assigned-clock-rates = <24576000>;
- status = "okay";
-};
-
-&snvs_pwrkey {
- status = "okay";
-};
-
-&uart2 { /* console */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- status = "okay";
-};
-
-&usbotg1 {
- dr_mode = "otg";
- hnp-disable;
- srp-disable;
- adp-disable;
- usb-role-switch;
- status = "okay";
-
- port {
- usb1_drd_sw: endpoint {
- remote-endpoint = <&typec1_dr_sw>;
- };
- };
-};
-
-&usdhc2 {
- assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
- assigned-clock-rates = <200000000>;
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
- pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
- pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
- cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- bus-width = <4>;
- vmmc-supply = <®_usdhc2_vmmc>;
- status = "okay";
-};
-
&usdhc3 {
assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
assigned-clock-rates = <400000000>;
@@ -358,196 +65,64 @@ &usdhc3 {
status = "okay";
};
-&wdog1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wdog>;
- fsl,ext-reset-output;
- status = "okay";
-};
-
&iomuxc {
- pinctrl-names = "default";
-
- pinctrl_fec1: fec1grp {
+ pinctrl_flexspi: flexspigrp {
fsl,pins = <
- MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
- MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
- MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
- MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
- MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
- MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
- MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
- MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
- MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
- MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
- MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
- MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
- MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
- MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
- MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19
- >;
- };
-
- pinctrl_gpio_led: gpioledgrp {
- fsl,pins = <
- MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19
- >;
- };
-
- pinctrl_gpio_wlf: gpiowlfgrp {
- fsl,pins = <
- MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
- MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
- >;
- };
-
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
- MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
- >;
- };
-
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
- MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
- >;
- };
-
- pinctrl_pmic: pmicirq {
- fsl,pins = <
- MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
- >;
- };
-
- pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
- fsl,pins = <
- MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
- >;
- };
-
- pinctrl_sai3: sai3grp {
- fsl,pins = <
- MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
- MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
- MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
- MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
- >;
- };
-
- pinctrl_typec1: typec1grp {
- fsl,pins = <
- MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159
- >;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
- MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
- >;
- };
-
- pinctrl_usdhc2_gpio: usdhc2grpgpio {
- fsl,pins = <
- MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
- MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
- MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
- MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
- MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
- MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
- MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
- >;
- };
-
- pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
- fsl,pins = <
- MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
- MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
- MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
- MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
- MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
- MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
- MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
- >;
- };
-
- pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
- fsl,pins = <
- MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
- MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
- MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
- MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
- MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
- MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
- MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2
+ MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
+ MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
+ MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
+ MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
+ MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
- MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
- MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
- MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
- MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
- MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
- MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
- MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
- MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
- MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
- MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
- MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <
- MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
- MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
- MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
- MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
- MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
- MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
- MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
- MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
- MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
- MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
- MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <
- MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
- MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
- MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
- MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
- MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
- MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
- MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
- MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
- MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
- MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
- MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
- >;
- };
-
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
new file mode 100644
index 0000000..f305a53
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -0,0 +1,474 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mm.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0x80000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_led>;
+
+ status {
+ label = "status";
+ gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ wm8524: audio-codec {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8524";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_wlf>;
+ wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+ };
+
+ sound-wm8524 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "wm8524-audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&cpudai>;
+ simple-audio-card,bitclock-master = <&cpudai>;
+ simple-audio-card,widgets =
+ "Line", "Left Line Out Jack",
+ "Line", "Right Line Out Jack";
+ simple-audio-card,routing =
+ "Left Line Out Jack", "LINEVOUTL",
+ "Right Line Out Jack", "LINEVOUTR";
+
+ cpudai: simple-audio-card,cpu {
+ sound-dai = <&sai3>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <32>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&wm8524>;
+ clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+ };
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic@4b {
+ compatible = "rohm,bd71847";
+ reg = <0x4b>;
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ rohm,reset-snvs-powered;
+
+ #clock-cells = <0>;
+ clocks = <&osc_32k 0>;
+ clock-output-names = "clk-32k-out";
+
+ regulators {
+ buck1_reg: BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <1000000>;
+ rohm,dvs-idle-voltage = <900000>;
+ };
+
+ buck3_reg: BUCK3 {
+ // BUCK5 in datasheet
+ regulator-name = "buck3";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ // BUCK6 in datasheet
+ regulator-name = "buck4";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5_reg: BUCK5 {
+ // BUCK7 in datasheet
+ regulator-name = "buck5";
+ regulator-min-microvolt = <1605000>;
+ regulator-max-microvolt = <1995000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6_reg: BUCK6 {
+ // BUCK8 in datasheet
+ regulator-name = "buck6";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ ptn5110: tcpc@50 {
+ compatible = "nxp,ptn5110";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_typec1>;
+ reg = <0x50>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <11 8>;
+ status = "okay";
+
+ port {
+ typec1_dr_sw: endpoint {
+ remote-endpoint = <&usb1_drd_sw>;
+ };
+ };
+
+ typec1_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ power-role = "dual";
+ data-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 20000, 3000)>;
+ op-sink-microwatt = <15000000>;
+ self-powered;
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ pca6416: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+&uart2 { /* console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ usb-role-switch;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ status = "okay";
+
+ port {
+ usb1_drd_sw: endpoint {
+ remote-endpoint = <&typec1_dr_sw>;
+ };
+ };
+};
+
+&usdhc2 {
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+ assigned-clock-rates = <200000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
+ MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19
+ >;
+ };
+
+ pinctrl_gpio_led: gpioledgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19
+ >;
+ };
+
+ pinctrl_gpio_wlf: gpiowlfgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_pmic: pmicirqgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
+ MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
+ MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
+ MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
+ >;
+ };
+
+ pinctrl_typec1: typec1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
+ MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
new file mode 100644
index 0000000..ac1fe15
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "imx8mm-var-som.dtsi"
+
+/ {
+ model = "Variscite VAR-SOM-MX8MM Symphony evaluation board";
+ compatible = "variscite,var-som-mx8mm-symphony", "variscite,var-som-mx8mm", "fsl,imx8mm";
+
+ reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb_otg2_vbus>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ back {
+ label = "Back";
+ gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ };
+
+ home {
+ label = "Home";
+ gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ };
+
+ menu {
+ label = "Menu";
+ gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led {
+ label = "Heartbeat";
+ gpios = <&pca9534 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+ðphy {
+ reset-gpios = <&pca9534 5 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pca9534: gpio@20 {
+ compatible = "nxp,pca9534";
+ reg = <0x20>;
+ gpio-controller;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pca9534>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ #gpio-cells = <2>;
+ wakeup-source;
+
+ /* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */
+ usb3-sata-sel-hog {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "usb3_sata_sel";
+ };
+
+ som-vselect-hog {
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "som_vselect";
+ };
+
+ enet-sel-hog {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "enet_sel";
+ };
+ };
+
+ extcon_usbotg1: typec@3d {
+ compatible = "nxp,ptn5150";
+ reg = <0x3d>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ptn5150>;
+ status = "okay";
+ };
+};
+
+&i2c3 {
+ /* Capacitive touch controller */
+ ft5x06_ts: touchscreen@38 {
+ compatible = "edt,edt-ft5406";
+ reg = <0x38>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_captouch>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ };
+};
+
+/* Header */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+/* Header */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usbotg1 {
+ disable-over-current;
+ extcon = <&extcon_usbotg1>, <&extcon_usbotg1>;
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ vbus-supply = <®_usb_otg2_vbus>;
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ disable-over-current;
+ /delete-property/ usb-role-switch;
+ /*
+ * FIXME: having USB2 enabled hangs the boot just after:
+ * [ 1.943365] ci_hdrc ci_hdrc.1: EHCI Host Controller
+ * [ 1.948287] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
+ * [ 1.971006] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
+ * [ 1.977203] hub 1-0:1.0: USB hub found
+ * [ 1.980987] hub 1-0:1.0: 1 port detected
+ */
+ status = "disabled";
+};
+
+&pinctrl_fec1 {
+ fsl,pins = <
+ MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
+ MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ /* Remove the MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 as not used */
+ >;
+};
+
+&iomuxc {
+ pinctrl_captouch: captouchgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x16
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_pca9534: pca9534grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x16
+ >;
+ };
+
+ pinctrl_ptn5150: ptn5150grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x16
+ >;
+ };
+
+ pinctrl_reg_usb_otg2_vbus: regusbotg2vbusgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x16
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
+ MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
+ MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
new file mode 100644
index 0000000..4107fe9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
@@ -0,0 +1,561 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx8mm.dtsi"
+
+/ {
+ model = "Variscite VAR-SOM-MX8MM module";
+ compatible = "variscite,var-som-mx8mm", "fsl,imx8mm";
+
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0x80000000>;
+ };
+
+ reg_eth_phy: regulator-eth-phy {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_eth_phy>;
+ regulator-name = "eth_phy_pwr";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+ operating-points-v2 = <&ddrc_opp_table>;
+
+ ddrc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-25M {
+ opp-hz = /bits/ 64 <25000000>;
+ };
+
+ opp-100M {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+
+ opp-750M {
+ opp-hz = /bits/ 64 <750000000>;
+ };
+ };
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>,
+ <&gpio1 0 GPIO_ACTIVE_LOW>;
+ /delete-property/ dmas;
+ /delete-property/ dma-names;
+ status = "okay";
+
+ /* Resistive touch controller */
+ touchscreen@0 {
+ reg = <0>;
+ compatible = "ti,ads7846";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_restouch>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+
+ spi-max-frequency = <1500000>;
+ pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+
+ ti,x-min = /bits/ 16 <125>;
+ touchscreen-size-x = /bits/ 16 <4008>;
+ ti,y-min = /bits/ 16 <282>;
+ touchscreen-size-y = /bits/ 16 <3864>;
+ ti,x-plate-ohms = /bits/ 16 <180>;
+ touchscreen-max-pressure = /bits/ 16 <255>;
+ touchscreen-average-samples = /bits/ 16 <10>;
+ ti,debounce-tol = /bits/ 16 <3>;
+ ti,debounce-rep = /bits/ 16 <1>;
+ ti,settle-delay-usec = /bits/ 16 <150>;
+ ti,keep-vref-on;
+ wakeup-source;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy>;
+ phy-supply = <®_eth_phy>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <10000>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic@4b {
+ compatible = "rohm,bd71847";
+ reg = <0x4b>;
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio2>;
+ /*
+ * The interrupt is not correct. It should be level low,
+ * however with internal pull up this causes IRQ storm.
+ */
+ interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+ rohm,reset-snvs-powered;
+
+ #clock-cells = <0>;
+ clocks = <&osc_32k 0>;
+ clock-output-names = "clk-32k-out";
+
+ regulators {
+ buck1_reg: BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <1000000>;
+ rohm,dvs-idle-voltage = <900000>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "buck3";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "buck4";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "buck5";
+ regulator-min-microvolt = <1605000>;
+ regulator-max-microvolt = <1995000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "buck6";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-compatible = "ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ /* TODO: configure audio, as of now just put a placeholder */
+ wm8904: codec@1a {
+ compatible = "wlf,wm8904";
+ reg = <0x1a>;
+ status = "disabled";
+ };
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+/* Bluetooth */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+/* Console */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "otg";
+ usb-role-switch;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "otg";
+ usb-role-switch;
+ status = "okay";
+};
+
+/* WIFI */
+&usdhc1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <4>;
+ non-removable;
+ keep-power-in-suspend;
+ status = "okay";
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+/* SD */
+&usdhc2 {
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+ assigned-clock-rates = <200000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+ assigned-clock-rates = <400000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x13
+ MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x13
+ MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x13
+ MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x13
+ MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x13
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
+ MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_pmic: pmicirqgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x41
+ >;
+ };
+
+ pinctrl_reg_eth_phy: regethphygrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x41
+ >;
+ };
+
+ pinctrl_restouch: restouchgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x1c0
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140
+ MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140
+ MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140
+ MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
+ MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
+ MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
+ MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
+ MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
+ MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
+ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194
+ MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4
+ MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4
+ MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4
+ MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4
+ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196
+ MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6
+ MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6
+ MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6
+ MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6
+ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 76f040e..b83f400 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -854,7 +854,8 @@ fec1: ethernet@30be0000 {
reg = <0x30be0000 0x10000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_ENET1_ROOT>,
<&clk IMX8MM_CLK_ENET1_ROOT>,
<&clk IMX8MM_CLK_ENET_TIMER>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index a1e5483..46e76cf 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -55,12 +55,12 @@ pmic@4b {
reg = <0x4b>;
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio1>;
- interrupts = <3 GPIO_ACTIVE_LOW>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
regulators {
buck1_reg: BUCK1 {
- regulator-name = "BUCK1";
+ regulator-name = "buck1";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
@@ -69,7 +69,7 @@ buck1_reg: BUCK1 {
};
buck2_reg: BUCK2 {
- regulator-name = "BUCK2";
+ regulator-name = "buck2";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
@@ -79,14 +79,14 @@ buck2_reg: BUCK2 {
buck3_reg: BUCK3 {
// BUCK5 in datasheet
- regulator-name = "BUCK3";
+ regulator-name = "buck3";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1350000>;
};
buck4_reg: BUCK4 {
// BUCK6 in datasheet
- regulator-name = "BUCK4";
+ regulator-name = "buck4";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -95,7 +95,7 @@ buck4_reg: BUCK4 {
buck5_reg: BUCK5 {
// BUCK7 in datasheet
- regulator-name = "BUCK5";
+ regulator-name = "buck5";
regulator-min-microvolt = <1605000>;
regulator-max-microvolt = <1995000>;
regulator-boot-on;
@@ -104,7 +104,7 @@ buck5_reg: BUCK5 {
buck6_reg: BUCK6 {
// BUCK8 in datasheet
- regulator-name = "BUCK6";
+ regulator-name = "buck6";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
@@ -112,7 +112,7 @@ buck6_reg: BUCK6 {
};
ldo1_reg: LDO1 {
- regulator-name = "LDO1";
+ regulator-name = "ldo1";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -120,7 +120,7 @@ ldo1_reg: LDO1 {
};
ldo2_reg: LDO2 {
- regulator-name = "LDO2";
+ regulator-name = "ldo2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
@@ -128,7 +128,7 @@ ldo2_reg: LDO2 {
};
ldo3_reg: LDO3 {
- regulator-name = "LDO3";
+ regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -136,7 +136,7 @@ ldo3_reg: LDO3 {
};
ldo4_reg: LDO4 {
- regulator-name = "LDO4";
+ regulator-name = "ldo4";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@@ -144,7 +144,7 @@ ldo4_reg: LDO4 {
};
ldo6_reg: LDO6 {
- regulator-name = "LDO6";
+ regulator-name = "ldo6";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@@ -153,11 +153,3 @@ ldo6_reg: LDO6 {
};
};
};
-
-&iomuxc {
- pinctrl_pmic: pmicirq {
- fsl,pins = <
- MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
- >;
- };
-};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
index b846526..707d848 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
@@ -7,6 +7,7 @@
#include "imx8mn.dtsi"
#include "imx8mn-evk.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "NXP i.MX8MNano EVK board";
@@ -19,7 +20,7 @@ pmic: pmic@25 {
reg = <0x25>;
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio1>;
- interrupts = <3 GPIO_ACTIVE_LOW>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
regulators {
buck1: BUCK1{
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 98f5324..4aa0dbd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -132,6 +132,8 @@ &usbotg1 {
srp-disable;
adp-disable;
usb-role-switch;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ samsung,picophy-dc-vol-level-adjust = <7>;
status = "okay";
port {
@@ -174,8 +176,6 @@ &wdog1 {
};
&iomuxc {
- pinctrl-names = "default";
-
pinctrl_fec1: fec1grp {
fsl,pins = <
MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3
@@ -223,13 +223,13 @@ MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
>;
};
- pinctrl_pmic: pmicirq {
+ pinctrl_pmic: pmicirqgrp {
fsl,pins = <
- MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
+ MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141
>;
};
- pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
>;
@@ -248,7 +248,7 @@ MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
>;
};
- pinctrl_usdhc2_gpio: usdhc2grpgpio {
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4
>;
@@ -266,7 +266,7 @@ MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
>;
};
- pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
@@ -278,7 +278,7 @@ MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
>;
};
- pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
@@ -306,7 +306,7 @@ MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <
MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000194
MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
@@ -322,7 +322,7 @@ MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <
MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000196
MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
new file mode 100644
index 0000000..f61c4877
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019-2020 Variscite Ltd.
+ * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "imx8mn-var-som.dtsi"
+
+/ {
+ model = "Variscite VAR-SOM-MX8MN Symphony evaluation board";
+ compatible = "variscite,var-som-mx8mn-symphony", "variscite,var-som-mx8mn", "fsl,imx8mn";
+
+ reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ back {
+ label = "Back";
+ gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ };
+
+ home {
+ label = "Home";
+ gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ };
+
+ menu {
+ label = "Menu";
+ gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led {
+ label = "Heartbeat";
+ gpios = <&pca9534 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+ðphy {
+ reset-gpios = <&pca9534 5 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pca9534: gpio@20 {
+ compatible = "nxp,pca9534";
+ reg = <0x20>;
+ gpio-controller;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pca9534>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ #gpio-cells = <2>;
+ wakeup-source;
+
+ /* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */
+ usb3-sata-sel-hog {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "usb3_sata_sel";
+ };
+
+ som-vselect-hog {
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "som_vselect";
+ };
+
+ enet-sel-hog {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "enet_sel";
+ };
+ };
+
+ extcon_usbotg1: typec@3d {
+ compatible = "nxp,ptn5150";
+ reg = <0x3d>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ptn5150>;
+ status = "okay";
+ };
+};
+
+&i2c3 {
+ /* Capacitive touch controller */
+ ft5x06_ts: touchscreen@38 {
+ compatible = "edt,edt-ft5406";
+ reg = <0x38>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_captouch>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ };
+};
+
+/* Header */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+/* Header */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usbotg1 {
+ disable-over-current;
+ extcon = <&extcon_usbotg1>, <&extcon_usbotg1>;
+};
+
+&pinctrl_fec1 {
+ fsl,pins = <
+ MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
+ MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ /* Remove the MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 as not used */
+ >;
+};
+
+&pinctrl_fec1_sleep {
+ fsl,pins = <
+ MX8MN_IOMUXC_ENET_MDC_GPIO1_IO16 0x120
+ MX8MN_IOMUXC_ENET_MDIO_GPIO1_IO17 0x120
+ MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18 0x120
+ MX8MN_IOMUXC_ENET_TD2_GPIO1_IO19 0x120
+ MX8MN_IOMUXC_ENET_TD1_GPIO1_IO20 0x120
+ MX8MN_IOMUXC_ENET_TD0_GPIO1_IO21 0x120
+ MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29 0x120
+ MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28 0x120
+ MX8MN_IOMUXC_ENET_RD1_GPIO1_IO27 0x120
+ MX8MN_IOMUXC_ENET_RD0_GPIO1_IO26 0x120
+ MX8MN_IOMUXC_ENET_TXC_GPIO1_IO23 0x120
+ MX8MN_IOMUXC_ENET_RXC_GPIO1_IO25 0x120
+ MX8MN_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x120
+ MX8MN_IOMUXC_ENET_TX_CTL_GPIO1_IO22 0x120
+ /* Remove the MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 as not used */
+ >;
+};
+
+&iomuxc {
+ pinctrl_captouch: captouchgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4 0x16
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
+ MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_pca9534: pca9534grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x16
+ >;
+ };
+
+ pinctrl_ptn5150: ptn5150grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x16
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x41
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
+ MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
+ MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
new file mode 100644
index 0000000..a2d0190
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
@@ -0,0 +1,551 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ * Copyright 2019-2020 Variscite Ltd.
+ * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx8mn.dtsi"
+
+/ {
+ model = "Variscite VAR-SOM-MX8MN module";
+ compatible = "variscite,var-som-mx8mn", "fsl,imx8mn";
+
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0x40000000>;
+ };
+
+ reg_eth_phy: regulator-eth-phy {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_eth_phy>;
+ regulator-name = "eth_phy_pwr";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>,
+ <&gpio1 0 GPIO_ACTIVE_LOW>;
+ /delete-property/ dmas;
+ /delete-property/ dma-names;
+ status = "okay";
+
+ /* Resistive touch controller */
+ touchscreen@0 {
+ reg = <0>;
+ compatible = "ti,ads7846";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_restouch>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+
+ spi-max-frequency = <1500000>;
+ pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+
+ ti,x-min = /bits/ 16 <125>;
+ touchscreen-size-x = /bits/ 16 <4008>;
+ ti,y-min = /bits/ 16 <282>;
+ touchscreen-size-y = /bits/ 16 <3864>;
+ ti,x-plate-ohms = /bits/ 16 <180>;
+ touchscreen-max-pressure = /bits/ 16 <255>;
+ touchscreen-average-samples = /bits/ 16 <10>;
+ ti,debounce-tol = /bits/ 16 <3>;
+ ti,debounce-rep = /bits/ 16 <1>;
+ ti,settle-delay-usec = /bits/ 16 <150>;
+ ti,keep-vref-on;
+ wakeup-source;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_fec1>;
+ pinctrl-1 = <&pinctrl_fec1_sleep>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy>;
+ phy-supply = <®_eth_phy>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic@4b {
+ compatible = "rohm,bd71847";
+ reg = <0x4b>;
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio2>;
+ /*
+ * The interrupt is not correct. It should be level low,
+ * however with internal pull up this causes IRQ storm.
+ */
+ interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+ rohm,reset-snvs-powered;
+
+ regulators {
+ buck1_reg: BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <1000000>;
+ rohm,dvs-idle-voltage = <900000>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "buck3";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "buck4";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "buck5";
+ regulator-min-microvolt = <1605000>;
+ regulator-max-microvolt = <1995000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "buck6";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-compatible = "ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ /* TODO: configure audio, as of now just put a placeholder */
+ wm8904: codec@1a {
+ compatible = "wlf,wm8904";
+ reg = <0x1a>;
+ status = "disabled";
+ };
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+/* Bluetooth */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ assigned-clocks = <&clk IMX8MN_CLK_UART2>;
+ assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+/* Console */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "otg";
+ usb-role-switch;
+ status = "okay";
+};
+
+/* WIFI */
+&usdhc1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <4>;
+ non-removable;
+ keep-power-in-suspend;
+ status = "okay";
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+/* SD */
+&usdhc2 {
+ assigned-clocks = <&clk IMX8MN_CLK_USDHC2>;
+ assigned-clock-rates = <200000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+ assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>;
+ assigned-clock-rates = <400000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x13
+ MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x13
+ MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x13
+ MX8MN_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x13
+ MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x13
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
+ MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
+ >;
+ };
+
+ pinctrl_fec1_sleep: fec1sleepgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_ENET_MDC_GPIO1_IO16 0x120
+ MX8MN_IOMUXC_ENET_MDIO_GPIO1_IO17 0x120
+ MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18 0x120
+ MX8MN_IOMUXC_ENET_TD2_GPIO1_IO19 0x120
+ MX8MN_IOMUXC_ENET_TD1_GPIO1_IO20 0x120
+ MX8MN_IOMUXC_ENET_TD0_GPIO1_IO21 0x120
+ MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29 0x120
+ MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28 0x120
+ MX8MN_IOMUXC_ENET_RD1_GPIO1_IO27 0x120
+ MX8MN_IOMUXC_ENET_RD0_GPIO1_IO26 0x120
+ MX8MN_IOMUXC_ENET_TXC_GPIO1_IO23 0x120
+ MX8MN_IOMUXC_ENET_RXC_GPIO1_IO25 0x120
+ MX8MN_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x120
+ MX8MN_IOMUXC_ENET_TX_CTL_GPIO1_IO22 0x120
+ MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x120
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
+ MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
+ MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_pmic: pmicirqgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x101
+ >;
+ };
+
+ pinctrl_reg_eth_phy: regethphygrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD1_DATA7_GPIO2_IO9 0x41
+ >;
+ };
+
+ pinctrl_restouch: restouchgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x1c0
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140
+ MX8MN_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140
+ MX8MN_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140
+ MX8MN_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
+ MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
+ MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
+ MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
+ MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
+ MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
+ MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x194
+ MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4
+ MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4
+ MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4
+ MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4
+ MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x196
+ MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6
+ MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6
+ MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6
+ MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6
+ MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x41
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
+ MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
+ MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
+ MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
+ MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
+ MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
+ MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
+ MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
+ MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
+ MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
+ MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
+ MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
+ MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
+ MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
+ MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
+ MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
+ MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
+ MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
+ MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
+ MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
+ MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
+ MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
+ MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
+ MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
+ MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
+ MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
+ MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
+ MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
+ MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
+ MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
+ MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
+ MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
+ MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
+ MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
+ MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
+ MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
+ MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
+ MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
+ MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
+ MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
+ MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
+ MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
+ MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
+ MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
+ MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
+ MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
+ MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
+ MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
+ MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 9385dd7..746faf1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -741,7 +741,8 @@ fec1: ethernet@30be0000 {
reg = <0x30be0000 0x10000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_ENET1_ROOT>,
<&clk IMX8MN_CLK_ENET1_ROOT>,
<&clk IMX8MN_CLK_ENET_TIMER>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 3da1fff..ad66f12 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -124,8 +124,6 @@ &wdog1 {
};
&iomuxc {
- pinctrl-names = "default";
-
pinctrl_fec: fecgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
@@ -159,7 +157,7 @@ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3
>;
};
- pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
>;
@@ -184,7 +182,7 @@ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
- pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
@@ -196,7 +194,7 @@ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
- pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
@@ -208,7 +206,7 @@ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
- pinctrl_usdhc2_gpio: usdhc2grp-gpio {
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
>;
@@ -230,7 +228,7 @@ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
@@ -246,7 +244,7 @@ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
>;
};
- pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
index 319ab34..0fef066 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
+++ b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
@@ -11,384 +11,318 @@
* <mux_reg conf_reg input_reg mux_mode input_val>
*/
#define MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x014 0x274 0x000 0x0 0x0
-#define MX8MP_IOMUXC_GPIO1_IO00__CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x014 0x274 0x000 0x1 0x0
-#define MX8MP_IOMUXC_GPIO1_IO00__MEDIAMIX_ISP_FL_TRIG_0 0x014 0x274 0x5D4 0x3 0x0
-#define MX8MP_IOMUXC_GPIO1_IO00__ANAMIX_REF_CLK_32K 0x014 0x274 0x000 0x5 0x0
-#define MX8MP_IOMUXC_GPIO1_IO00__CCMSRCGPCMIX_EXT_CLK1 0x014 0x274 0x000 0x6 0x0
-#define MX8MP_IOMUXC_GPIO1_IO00__SJC_FAIL 0x014 0x274 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__CCM_ENET_PHY_REF_CLK_ROOT 0x014 0x274 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__ISP_FL_TRIG_0 0x014 0x274 0x5D4 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1 0x014 0x274 0x000 0x6 0x0
#define MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x018 0x278 0x000 0x0 0x0
#define MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT 0x018 0x278 0x000 0x1 0x0
-#define MX8MP_IOMUXC_GPIO1_IO01__MEDIAMIX_ISP_SHUTTER_TRIG_0 0x018 0x278 0x5DC 0x3 0x0
-#define MX8MP_IOMUXC_GPIO1_IO01__ANAMIX_REF_CLK_24M 0x018 0x278 0x000 0x5 0x0
-#define MX8MP_IOMUXC_GPIO1_IO01__CCMSRCGPCMIX_EXT_CLK2 0x018 0x278 0x000 0x6 0x0
-#define MX8MP_IOMUXC_GPIO1_IO01__SJC_ACTIVE 0x018 0x278 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__ISP_SHUTTER_TRIG_0 0x018 0x278 0x5DC 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__CCM_EXT_CLK2 0x018 0x278 0x000 0x6 0x0
#define MX8MP_IOMUXC_GPIO1_IO02__GPIO1_IO02 0x01C 0x27C 0x000 0x0 0x0
#define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x01C 0x27C 0x000 0x1 0x0
-#define MX8MP_IOMUXC_GPIO1_IO02__MEDIAMIX_ISP_FLASH_TRIG_0 0x01C 0x27C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__ISP_FLASH_TRIG_0 0x01C 0x27C 0x000 0x3 0x0
#define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_ANY 0x01C 0x27C 0x000 0x5 0x0
#define MX8MP_IOMUXC_GPIO1_IO02__SJC_DE_B 0x01C 0x27C 0x000 0x7 0x0
#define MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x020 0x280 0x000 0x0 0x0
#define MX8MP_IOMUXC_GPIO1_IO03__USDHC1_VSELECT 0x020 0x280 0x000 0x1 0x0
-#define MX8MP_IOMUXC_GPIO1_IO03__MEDIAMIX_ISP_PRELIGHT_TRIG_0 0x020 0x280 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__ISP_PRELIGHT_TRIG_0 0x020 0x280 0x000 0x3 0x0
#define MX8MP_IOMUXC_GPIO1_IO03__SDMA1_EXT_EVENT00 0x020 0x280 0x000 0x5 0x0
-#define MX8MP_IOMUXC_GPIO1_IO03__ANAMIX_XTAL_OK 0x020 0x280 0x000 0x6 0x0
-#define MX8MP_IOMUXC_GPIO1_IO03__SJC_DONE 0x020 0x280 0x000 0x7 0x0
#define MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04 0x024 0x284 0x000 0x0 0x0
#define MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x024 0x284 0x000 0x1 0x0
-#define MX8MP_IOMUXC_GPIO1_IO04__MEDIAMIX_ISP_SHUTTER_OPEN_0 0x024 0x284 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__ISP_SHUTTER_OPEN_0 0x024 0x284 0x000 0x3 0x0
#define MX8MP_IOMUXC_GPIO1_IO04__SDMA1_EXT_EVENT01 0x024 0x284 0x000 0x5 0x0
-#define MX8MP_IOMUXC_GPIO1_IO04__ANAMIX_XTAL_OK_LV 0x024 0x284 0x000 0x6 0x0
-#define MX8MP_IOMUXC_GPIO1_IO04__USDHC1_TEST_TRIG 0x024 0x284 0x000 0x7 0x0
#define MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x028 0x288 0x000 0x0 0x0
#define MX8MP_IOMUXC_GPIO1_IO05__M7_NMI 0x028 0x288 0x000 0x1 0x0
-#define MX8MP_IOMUXC_GPIO1_IO05__MEDIAMIX_ISP_FL_TRIG_1 0x028 0x288 0x5D8 0x3 0x0
-#define MX8MP_IOMUXC_GPIO1_IO05__CCMSRCGPCMIX_PMIC_READY 0x028 0x288 0x554 0x5 0x0
-#define MX8MP_IOMUXC_GPIO1_IO05__CCMSRCGPCMIX_INT_BOOT 0x028 0x288 0x000 0x6 0x0
-#define MX8MP_IOMUXC_GPIO1_IO05__USDHC2_TEST_TRIG 0x028 0x288 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__ISP_FL_TRIG_1 0x028 0x288 0x5D8 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__CCM_PMIC_READY 0x028 0x288 0x554 0x5 0x0
#define MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x02C 0x28C 0x000 0x0 0x0
#define MX8MP_IOMUXC_GPIO1_IO06__ENET_QOS_MDC 0x02C 0x28C 0x000 0x1 0x0
-#define MX8MP_IOMUXC_GPIO1_IO06__MEDIAMIX_ISP_SHUTTER_TRIG_1 0x02C 0x28C 0x5E0 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__ISP_SHUTTER_TRIG_1 0x02C 0x28C 0x5E0 0x3 0x0
#define MX8MP_IOMUXC_GPIO1_IO06__USDHC1_CD_B 0x02C 0x28C 0x000 0x5 0x0
-#define MX8MP_IOMUXC_GPIO1_IO06__CCMSRCGPCMIX_EXT_CLK3 0x02C 0x28C 0x000 0x6 0x0
-#define MX8MP_IOMUXC_GPIO1_IO06__ECSPI1_TEST_TRIG 0x02C 0x28C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__CCM_EXT_CLK3 0x02C 0x28C 0x000 0x6 0x0
#define MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x030 0x290 0x000 0x0 0x0
#define MX8MP_IOMUXC_GPIO1_IO07__ENET_QOS_MDIO 0x030 0x290 0x590 0x1 0x0
-#define MX8MP_IOMUXC_GPIO1_IO07__MEDIAMIX_ISP_FLASH_TRIG_1 0x030 0x290 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__ISP_FLASH_TRIG_1 0x030 0x290 0x000 0x3 0x0
#define MX8MP_IOMUXC_GPIO1_IO07__USDHC1_WP 0x030 0x290 0x000 0x5 0x0
-#define MX8MP_IOMUXC_GPIO1_IO07__CCMSRCGPCMIX_EXT_CLK4 0x030 0x290 0x000 0x6 0x0
-#define MX8MP_IOMUXC_GPIO1_IO07__ECSPI2_TEST_TRIG 0x030 0x290 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__CCM_EXT_CLK4 0x030 0x290 0x000 0x6 0x0
#define MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x034 0x294 0x000 0x0 0x0
#define MX8MP_IOMUXC_GPIO1_IO08__ENET_QOS_1588_EVENT0_IN 0x034 0x294 0x000 0x1 0x0
#define MX8MP_IOMUXC_GPIO1_IO08__PWM1_OUT 0x034 0x294 0x000 0x2 0x0
-#define MX8MP_IOMUXC_GPIO1_IO08__MEDIAMIX_ISP_PRELIGHT_TRIG_1 0x034 0x294 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__ISP_PRELIGHT_TRIG_1 0x034 0x294 0x000 0x3 0x0
#define MX8MP_IOMUXC_GPIO1_IO08__ENET_QOS_1588_EVENT0_AUX_IN 0x034 0x294 0x000 0x4 0x0
#define MX8MP_IOMUXC_GPIO1_IO08__USDHC2_RESET_B 0x034 0x294 0x000 0x5 0x0
-#define MX8MP_IOMUXC_GPIO1_IO08__CCMSRCGPCMIX_WAIT 0x034 0x294 0x000 0x6 0x0
-#define MX8MP_IOMUXC_GPIO1_IO08__FLEXSPI_TEST_TRIG 0x034 0x294 0x000 0x7 0x0
#define MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x038 0x298 0x000 0x0 0x0
#define MX8MP_IOMUXC_GPIO1_IO09__ENET_QOS_1588_EVENT0_OUT 0x038 0x298 0x000 0x1 0x0
#define MX8MP_IOMUXC_GPIO1_IO09__PWM2_OUT 0x038 0x298 0x000 0x2 0x0
-#define MX8MP_IOMUXC_GPIO1_IO09__MEDIAMIX_ISP_SHUTTER_OPEN_1 0x038 0x298 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__ISP_SHUTTER_OPEN_1 0x038 0x298 0x000 0x3 0x0
#define MX8MP_IOMUXC_GPIO1_IO09__USDHC3_RESET_B 0x038 0x298 0x000 0x4 0x0
-#define MX8MP_IOMUXC_GPIO1_IO09__AUDIOMIX_EXT_EVENT00 0x038 0x298 0x000 0x5 0x0
-#define MX8MP_IOMUXC_GPIO1_IO09__CCMSRCGPCMIX_STOP 0x038 0x298 0x000 0x6 0x0
-#define MX8MP_IOMUXC_GPIO1_IO09__RAWNAND_TEST_TRIG 0x038 0x298 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__SDMA2_EXT_EVENT00 0x038 0x298 0x000 0x5 0x0
#define MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x03C 0x29C 0x000 0x0 0x0
-#define MX8MP_IOMUXC_GPIO1_IO10__HSIOMIX_usb1_OTG_ID 0x03C 0x29C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x03C 0x29C 0x000 0x1 0x0
#define MX8MP_IOMUXC_GPIO1_IO10__PWM3_OUT 0x03C 0x29C 0x000 0x2 0x0
-#define MX8MP_IOMUXC_GPIO1_IO10__OCOTP_FUSE_LATCHED 0x03C 0x29C 0x000 0x7 0x0
#define MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x040 0x2A0 0x000 0x0 0x0
-#define MX8MP_IOMUXC_GPIO1_IO11__HSIOMIX_usb2_OTG_ID 0x040 0x2A0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__USB2_OTG_ID 0x040 0x2A0 0x000 0x1 0x0
#define MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT 0x040 0x2A0 0x000 0x2 0x0
#define MX8MP_IOMUXC_GPIO1_IO11__USDHC3_VSELECT 0x040 0x2A0 0x000 0x4 0x0
-#define MX8MP_IOMUXC_GPIO1_IO11__CCMSRCGPCMIX_PMIC_READY 0x040 0x2A0 0x554 0x5 0x1
-#define MX8MP_IOMUXC_GPIO1_IO11__CCMSRCGPCMIX_OUT0 0x040 0x2A0 0x000 0x6 0x0
-#define MX8MP_IOMUXC_GPIO1_IO11__CAAM_RNG_OSC_OBS 0x040 0x2A0 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__CCM_PMIC_READY 0x040 0x2A0 0x554 0x5 0x1
#define MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x044 0x2A4 0x000 0x0 0x0
-#define MX8MP_IOMUXC_GPIO1_IO12__HSIOMIX_usb1_OTG_PWR 0x044 0x2A4 0x000 0x1 0x0
-#define MX8MP_IOMUXC_GPIO1_IO12__AUDIOMIX_EXT_EVENT01 0x044 0x2A4 0x000 0x5 0x0
-#define MX8MP_IOMUXC_GPIO1_IO12__CCMSRCGPCMIX_OUT1 0x044 0x2A4 0x000 0x6 0x0
-#define MX8MP_IOMUXC_GPIO1_IO12__CSU_CSU_ALARM_AUT00 0x044 0x2A4 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR 0x044 0x2A4 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO12__SDMA2_EXT_EVENT01 0x044 0x2A4 0x000 0x5 0x0
#define MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x048 0x2A8 0x000 0x0 0x0
-#define MX8MP_IOMUXC_GPIO1_IO13__HSIOMIX_usb1_OTG_OC 0x048 0x2A8 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x048 0x2A8 0x000 0x1 0x0
#define MX8MP_IOMUXC_GPIO1_IO13__PWM2_OUT 0x048 0x2A8 0x000 0x5 0x0
-#define MX8MP_IOMUXC_GPIO1_IO13__CCMSRCGPCMIX_OUT2 0x048 0x2A8 0x000 0x6 0x0
-#define MX8MP_IOMUXC_GPIO1_IO13__CSU_CSU_ALARM_AUT01 0x048 0x2A8 0x000 0x7 0x0
#define MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x04C 0x2AC 0x000 0x0 0x0
-#define MX8MP_IOMUXC_GPIO1_IO14__HSIOMIX_usb2_OTG_PWR 0x04C 0x2AC 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x04C 0x2AC 0x000 0x1 0x0
#define MX8MP_IOMUXC_GPIO1_IO14__USDHC3_CD_B 0x04C 0x2AC 0x608 0x4 0x0
#define MX8MP_IOMUXC_GPIO1_IO14__PWM3_OUT 0x04C 0x2AC 0x000 0x5 0x0
-#define MX8MP_IOMUXC_GPIO1_IO14__CCMSRCGPCMIX_CLKO1 0x04C 0x2AC 0x000 0x6 0x0
-#define MX8MP_IOMUXC_GPIO1_IO14__CSU_CSU_ALARM_AUT02 0x04C 0x2AC 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1 0x04C 0x2AC 0x000 0x6 0x0
#define MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x050 0x2B0 0x000 0x0 0x0
-#define MX8MP_IOMUXC_GPIO1_IO15__HSIOMIX_usb2_OTG_OC 0x050 0x2B0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC 0x050 0x2B0 0x000 0x1 0x0
#define MX8MP_IOMUXC_GPIO1_IO15__USDHC3_WP 0x050 0x2B0 0x634 0x4 0x0
#define MX8MP_IOMUXC_GPIO1_IO15__PWM4_OUT 0x050 0x2B0 0x000 0x5 0x0
-#define MX8MP_IOMUXC_GPIO1_IO15__CCMSRCGPCMIX_CLKO2 0x050 0x2B0 0x000 0x6 0x0
-#define MX8MP_IOMUXC_GPIO1_IO15__CSU_CSU_INT_DEB 0x050 0x2B0 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__CCM_CLKO2 0x050 0x2B0 0x000 0x6 0x0
#define MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x054 0x2B4 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_MDC__AUDIOMIX_SAI6_TX_DATA00 0x054 0x2B4 0x000 0x2 0x0
#define MX8MP_IOMUXC_ENET_MDC__GPIO1_IO16 0x054 0x2B4 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_MDC__USDHC3_STROBE 0x054 0x2B4 0x630 0x6 0x0
-#define MX8MP_IOMUXC_ENET_MDC__SIM_M_HADDR15 0x054 0x2B4 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x058 0x2B8 0x590 0x0 0x1
#define MX8MP_IOMUXC_ENET_MDIO__AUDIOMIX_SAI6_TX_SYNC 0x058 0x2B8 0x528 0x2 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__AUDIOMIX_PDM_BIT_STREAM03 0x058 0x2B8 0x4CC 0x3 0x0
#define MX8MP_IOMUXC_ENET_MDIO__GPIO1_IO17 0x058 0x2B8 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_MDIO__USDHC3_DATA5 0x058 0x2B8 0x624 0x6 0x0
-#define MX8MP_IOMUXC_ENET_MDIO__SIM_M_HADDR16 0x058 0x2B8 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x05C 0x2BC 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_TD3__AUDIOMIX_SAI6_TX_BCLK 0x05C 0x2BC 0x524 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD3__AUDIOMIX_PDM_BIT_STREAM02 0x05C 0x2BC 0x4C8 0x3 0x0
#define MX8MP_IOMUXC_ENET_TD3__GPIO1_IO18 0x05C 0x2BC 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_TD3__USDHC3_DATA6 0x05C 0x2BC 0x628 0x6 0x0
-#define MX8MP_IOMUXC_ENET_TD3__SIM_M_HADDR17 0x05C 0x2BC 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x060 0x2C0 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK 0x060 0x2C0 0x000 0x1 0x0
#define MX8MP_IOMUXC_ENET_TD2__AUDIOMIX_SAI6_RX_DATA00 0x060 0x2C0 0x51C 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD2__AUDIOMIX_PDM_BIT_STREAM01 0x060 0x2C0 0x4C4 0x3 0x0
#define MX8MP_IOMUXC_ENET_TD2__GPIO1_IO19 0x060 0x2C0 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_TD2__USDHC3_DATA7 0x060 0x2C0 0x62C 0x6 0x0
-#define MX8MP_IOMUXC_ENET_TD2__SIM_M_HADDR18 0x060 0x2C0 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x064 0x2C4 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_TD1__AUDIOMIX_SAI6_RX_SYNC 0x064 0x2C4 0x520 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD1__AUDIOMIX_PDM_BIT_STREAM00 0x064 0x2C4 0x4C0 0x3 0x0
#define MX8MP_IOMUXC_ENET_TD1__GPIO1_IO20 0x064 0x2C4 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_TD1__USDHC3_CD_B 0x064 0x2C4 0x608 0x6 0x1
-#define MX8MP_IOMUXC_ENET_TD1__SIM_M_HADDR19 0x064 0x2C4 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x068 0x2C8 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_TD0__AUDIOMIX_SAI6_RX_BCLK 0x068 0x2C8 0x518 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD0__AUDIOMIX_PDM_CLK 0x068 0x2C8 0x000 0x3 0x0
#define MX8MP_IOMUXC_ENET_TD0__GPIO1_IO21 0x068 0x2C8 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_TD0__USDHC3_WP 0x068 0x2C8 0x634 0x6 0x1
-#define MX8MP_IOMUXC_ENET_TD0__SIM_M_HADDR20 0x068 0x2C8 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x06C 0x2CC 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_TX_CTL__AUDIOMIX_SAI6_MCLK 0x06C 0x2CC 0x514 0x2 0x0
-#define MX8MP_IOMUXC_ENET_TX_CTL__AUDIOMIX_SPDIF_OUT 0x06C 0x2CC 0x000 0x3 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__AUDIOMIX_SPDIF1_OUT 0x06C 0x2CC 0x000 0x3 0x0
#define MX8MP_IOMUXC_ENET_TX_CTL__GPIO1_IO22 0x06C 0x2CC 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_TX_CTL__USDHC3_DATA0 0x06C 0x2CC 0x610 0x6 0x0
-#define MX8MP_IOMUXC_ENET_TX_CTL__SIM_M_HADDR21 0x06C 0x2CC 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x070 0x2D0 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_TXC__ENET_QOS_TX_ER 0x070 0x2D0 0x000 0x1 0x0
#define MX8MP_IOMUXC_ENET_TXC__AUDIOMIX_SAI7_TX_DATA00 0x070 0x2D0 0x000 0x2 0x0
#define MX8MP_IOMUXC_ENET_TXC__GPIO1_IO23 0x070 0x2D0 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_TXC__USDHC3_DATA1 0x070 0x2D0 0x614 0x6 0x0
-#define MX8MP_IOMUXC_ENET_TXC__SIM_M_HADDR22 0x070 0x2D0 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x074 0x2D4 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_SAI7_TX_SYNC 0x074 0x2D4 0x540 0x2 0x0
-#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_BIT_STREAM03 0x074 0x2D4 0x4CC 0x3 0x1
+#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_PDM_BIT_STREAM03 0x074 0x2D4 0x4CC 0x3 0x1
#define MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24 0x074 0x2D4 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_RX_CTL__USDHC3_DATA2 0x074 0x2D4 0x618 0x6 0x0
-#define MX8MP_IOMUXC_ENET_RX_CTL__SIM_M_HADDR23 0x074 0x2D4 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x078 0x2D8 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER 0x078 0x2D8 0x000 0x1 0x0
#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_SAI7_TX_BCLK 0x078 0x2D8 0x53C 0x2 0x0
-#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_BIT_STREAM02 0x078 0x2D8 0x4C8 0x3 0x1
+#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_PDM_BIT_STREAM02 0x078 0x2D8 0x4C8 0x3 0x1
#define MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25 0x078 0x2D8 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_RXC__USDHC3_DATA3 0x078 0x2D8 0x61C 0x6 0x0
-#define MX8MP_IOMUXC_ENET_RXC__SIM_M_HADDR24 0x078 0x2D8 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x07C 0x2DC 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_SAI7_RX_DATA00 0x07C 0x2DC 0x534 0x2 0x0
-#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_BIT_STREAM01 0x07C 0x2DC 0x4C4 0x3 0x1
+#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_PDM_BIT_STREAM01 0x07C 0x2DC 0x4C4 0x3 0x1
#define MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26 0x07C 0x2DC 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_RD0__USDHC3_DATA4 0x07C 0x2DC 0x620 0x6 0x0
-#define MX8MP_IOMUXC_ENET_RD0__SIM_M_HADDR25 0x07C 0x2DC 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x080 0x2E0 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_SAI7_RX_SYNC 0x080 0x2E0 0x538 0x2 0x0
-#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_BIT_STREAM00 0x080 0x2E0 0x4C0 0x3 0x1
+#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_PDM_BIT_STREAM00 0x080 0x2E0 0x4C0 0x3 0x1
#define MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27 0x080 0x2E0 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_RD1__USDHC3_RESET_B 0x080 0x2E0 0x000 0x6 0x0
-#define MX8MP_IOMUXC_ENET_RD1__SIM_M_HADDR26 0x080 0x2E0 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x084 0x2E4 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_RD2__AUDIOMIX_SAI7_RX_BCLK 0x084 0x2E4 0x530 0x2 0x0
-#define MX8MP_IOMUXC_ENET_RD2__AUDIOMIX_CLK 0x084 0x2E4 0x000 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD2__AUDIOMIX_PDM_CLK 0x084 0x2E4 0x000 0x3 0x0
#define MX8MP_IOMUXC_ENET_RD2__GPIO1_IO28 0x084 0x2E4 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_RD2__USDHC3_CLK 0x084 0x2E4 0x604 0x6 0x0
-#define MX8MP_IOMUXC_ENET_RD2__SIM_M_HADDR27 0x084 0x2E4 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x088 0x2E8 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_RD3__AUDIOMIX_SAI7_MCLK 0x088 0x2E8 0x52C 0x2 0x0
-#define MX8MP_IOMUXC_ENET_RD3__AUDIOMIX_SPDIF_IN 0x088 0x2E8 0x544 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD3__AUDIOMIX_SPDIF1_IN 0x088 0x2E8 0x544 0x3 0x0
#define MX8MP_IOMUXC_ENET_RD3__GPIO1_IO29 0x088 0x2E8 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_RD3__USDHC3_CMD 0x088 0x2E8 0x60C 0x6 0x0
-#define MX8MP_IOMUXC_ENET_RD3__SIM_M_HADDR28 0x088 0x2E8 0x000 0x7 0x0
#define MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x08C 0x2EC 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD1_CLK__ENET1_MDC 0x08C 0x2EC 0x000 0x1 0x0
#define MX8MP_IOMUXC_SD1_CLK__I2C5_SCL 0x08C 0x2EC 0x5C4 0x3 0x0
#define MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX 0x08C 0x2EC 0x000 0x4 0x0
#define MX8MP_IOMUXC_SD1_CLK__UART1_DTE_RX 0x08C 0x2EC 0x5E8 0x4 0x0
#define MX8MP_IOMUXC_SD1_CLK__GPIO2_IO00 0x08C 0x2EC 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SD1_CLK__SIM_M_HADDR29 0x08C 0x2EC 0x000 0x7 0x0
#define MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x090 0x2F0 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD1_CMD__ENET1_MDIO 0x090 0x2F0 0x57C 0x1 0x0
#define MX8MP_IOMUXC_SD1_CMD__I2C5_SDA 0x090 0x2F0 0x5C8 0x3 0x0
#define MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX 0x090 0x2F0 0x5E8 0x4 0x1
#define MX8MP_IOMUXC_SD1_CMD__UART1_DTE_TX 0x090 0x2F0 0x000 0x4 0x0
#define MX8MP_IOMUXC_SD1_CMD__GPIO2_IO01 0x090 0x2F0 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SD1_CMD__SIM_M_HADDR30 0x090 0x2F0 0x000 0x7 0x0
#define MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x094 0x2F4 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD1_DATA0__ENET1_RGMII_TD1 0x094 0x2F4 0x000 0x1 0x0
#define MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL 0x094 0x2F4 0x5CC 0x3 0x0
#define MX8MP_IOMUXC_SD1_DATA0__UART1_DCE_RTS 0x094 0x2F4 0x5E4 0x4 0x0
#define MX8MP_IOMUXC_SD1_DATA0__UART1_DTE_CTS 0x094 0x2F4 0x000 0x4 0x0
#define MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02 0x094 0x2F4 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SD1_DATA0__SIM_M_HADDR31 0x094 0x2F4 0x000 0x7 0x0
#define MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x098 0x2F8 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD1_DATA1__ENET1_RGMII_TD0 0x098 0x2F8 0x000 0x1 0x0
#define MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA 0x098 0x2F8 0x5D0 0x3 0x0
#define MX8MP_IOMUXC_SD1_DATA1__UART1_DCE_CTS 0x098 0x2F8 0x000 0x4 0x0
#define MX8MP_IOMUXC_SD1_DATA1__UART1_DTE_RTS 0x098 0x2F8 0x5E4 0x4 0x1
#define MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03 0x098 0x2F8 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SD1_DATA1__SIM_M_HBURST00 0x098 0x2F8 0x000 0x7 0x0
#define MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x09C 0x2FC 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD1_DATA2__ENET1_RGMII_RD0 0x09C 0x2FC 0x580 0x1 0x0
#define MX8MP_IOMUXC_SD1_DATA2__I2C4_SCL 0x09C 0x2FC 0x5BC 0x3 0x0
#define MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX 0x09C 0x2FC 0x000 0x4 0x0
#define MX8MP_IOMUXC_SD1_DATA2__UART2_DTE_RX 0x09C 0x2FC 0x5F0 0x4 0x0
#define MX8MP_IOMUXC_SD1_DATA2__GPIO2_IO04 0x09C 0x2FC 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SD1_DATA2__SIM_M_HBURST01 0x09C 0x2FC 0x000 0x7 0x0
#define MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x0A0 0x300 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD1_DATA3__ENET1_RGMII_RD1 0x0A0 0x300 0x584 0x1 0x0
#define MX8MP_IOMUXC_SD1_DATA3__I2C4_SDA 0x0A0 0x300 0x5C0 0x3 0x0
#define MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX 0x0A0 0x300 0x5F0 0x4 0x1
#define MX8MP_IOMUXC_SD1_DATA3__UART2_DTE_TX 0x0A0 0x300 0x000 0x4 0x0
#define MX8MP_IOMUXC_SD1_DATA3__GPIO2_IO05 0x0A0 0x300 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SD1_DATA3__SIM_M_HBURST02 0x0A0 0x300 0x000 0x7 0x0
#define MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4 0x0A4 0x304 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD1_DATA4__ENET1_RGMII_TX_CTL 0x0A4 0x304 0x000 0x1 0x0
#define MX8MP_IOMUXC_SD1_DATA4__I2C1_SCL 0x0A4 0x304 0x5A4 0x3 0x0
#define MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS 0x0A4 0x304 0x5EC 0x4 0x0
#define MX8MP_IOMUXC_SD1_DATA4__UART2_DTE_CTS 0x0A4 0x304 0x000 0x4 0x0
#define MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x0A4 0x304 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SD1_DATA4__SIM_M_HRESP 0x0A4 0x304 0x000 0x7 0x0
#define MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5 0x0A8 0x308 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD1_DATA5__ENET1_TX_ER 0x0A8 0x308 0x000 0x1 0x0
#define MX8MP_IOMUXC_SD1_DATA5__I2C1_SDA 0x0A8 0x308 0x5A8 0x3 0x0
#define MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS 0x0A8 0x308 0x000 0x4 0x0
#define MX8MP_IOMUXC_SD1_DATA5__UART2_DTE_RTS 0x0A8 0x308 0x5EC 0x4 0x1
#define MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x0A8 0x308 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SD1_DATA5__TPSMP_HDATA05 0x0A8 0x308 0x000 0x7 0x0
#define MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6 0x0AC 0x30C 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD1_DATA6__ENET1_RGMII_RX_CTL 0x0AC 0x30C 0x588 0x1 0x0
#define MX8MP_IOMUXC_SD1_DATA6__I2C2_SCL 0x0AC 0x30C 0x5AC 0x3 0x0
#define MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX 0x0AC 0x30C 0x000 0x4 0x0
#define MX8MP_IOMUXC_SD1_DATA6__UART3_DTE_RX 0x0AC 0x30C 0x5F8 0x4 0x0
#define MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08 0x0AC 0x30C 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SD1_DATA6__TPSMP_HDATA06 0x0AC 0x30C 0x000 0x7 0x0
#define MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7 0x0B0 0x310 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD1_DATA7__ENET1_RX_ER 0x0B0 0x310 0x58C 0x1 0x0
#define MX8MP_IOMUXC_SD1_DATA7__I2C2_SDA 0x0B0 0x310 0x5B0 0x3 0x0
#define MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX 0x0B0 0x310 0x5F8 0x4 0x1
#define MX8MP_IOMUXC_SD1_DATA7__UART3_DTE_TX 0x0B0 0x310 0x000 0x4 0x0
#define MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09 0x0B0 0x310 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SD1_DATA7__TPSMP_HDATA07 0x0B0 0x310 0x000 0x7 0x0
#define MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B 0x0B4 0x314 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD1_RESET_B__ENET1_TX_CLK 0x0B4 0x314 0x578 0x1 0x0
#define MX8MP_IOMUXC_SD1_RESET_B__I2C3_SCL 0x0B4 0x314 0x5B4 0x3 0x0
#define MX8MP_IOMUXC_SD1_RESET_B__UART3_DCE_RTS 0x0B4 0x314 0x5F4 0x4 0x0
#define MX8MP_IOMUXC_SD1_RESET_B__UART3_DTE_CTS 0x0B4 0x314 0x000 0x4 0x0
#define MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x0B4 0x314 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SD1_RESET_B__ECSPI3_TEST_TRIG 0x0B4 0x314 0x000 0x7 0x0
#define MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE 0x0B8 0x318 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD1_STROBE__I2C3_SDA 0x0B8 0x318 0x5B8 0x3 0x0
#define MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS 0x0B8 0x318 0x000 0x4 0x0
#define MX8MP_IOMUXC_SD1_STROBE__UART3_DTE_RTS 0x0B8 0x318 0x5F4 0x4 0x1
#define MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x0B8 0x318 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SD1_STROBE__USDHC3_TEST_TRIG 0x0B8 0x318 0x000 0x7 0x0
#define MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x0BC 0x31C 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x0BC 0x31C 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SD2_CD_B__CCMSRCGPCMIX_TESTER_ACK 0x0BC 0x31C 0x000 0x6 0x0
#define MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x0C0 0x320 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD2_CLK__ECSPI2_SCLK 0x0C0 0x320 0x568 0x2 0x0
#define MX8MP_IOMUXC_SD2_CLK__UART4_DCE_RX 0x0C0 0x320 0x600 0x3 0x0
#define MX8MP_IOMUXC_SD2_CLK__UART4_DTE_TX 0x0C0 0x320 0x000 0x3 0x0
#define MX8MP_IOMUXC_SD2_CLK__GPIO2_IO13 0x0C0 0x320 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SD2_CLK__CCMSRCGPCMIX_OBSERVE0 0x0C0 0x320 0x000 0x6 0x0
-#define MX8MP_IOMUXC_SD2_CLK__OBSERVE_MUX_OUT00 0x0C0 0x320 0x000 0x7 0x0
#define MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x0C4 0x324 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD2_CMD__ECSPI2_MOSI 0x0C4 0x324 0x570 0x2 0x0
#define MX8MP_IOMUXC_SD2_CMD__UART4_DCE_TX 0x0C4 0x324 0x000 0x3 0x0
#define MX8MP_IOMUXC_SD2_CMD__UART4_DTE_RX 0x0C4 0x324 0x600 0x3 0x1
-#define MX8MP_IOMUXC_SD2_CMD__AUDIOMIX_CLK 0x0C4 0x324 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD2_CMD__AUDIOMIX_PDM_CLK 0x0C4 0x324 0x000 0x4 0x0
#define MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x0C4 0x324 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SD2_CMD__CCMSRCGPCMIX_OBSERVE1 0x0C4 0x324 0x000 0x6 0x0
-#define MX8MP_IOMUXC_SD2_CMD__OBSERVE_MUX_OUT01 0x0C4 0x324 0x000 0x7 0x0
#define MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x0C8 0x328 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD2_DATA0__I2C4_SDA 0x0C8 0x328 0x5C0 0x2 0x1
#define MX8MP_IOMUXC_SD2_DATA0__UART2_DCE_RX 0x0C8 0x328 0x5F0 0x3 0x2
#define MX8MP_IOMUXC_SD2_DATA0__UART2_DTE_TX 0x0C8 0x328 0x000 0x3 0x0
-#define MX8MP_IOMUXC_SD2_DATA0__AUDIOMIX_BIT_STREAM00 0x0C8 0x328 0x4C0 0x4 0x2
+#define MX8MP_IOMUXC_SD2_DATA0__AUDIOMIX_PDM_BIT_STREAM00 0x0C8 0x328 0x4C0 0x4 0x2
#define MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15 0x0C8 0x328 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2 0x0C8 0x328 0x000 0x6 0x0
-#define MX8MP_IOMUXC_SD2_DATA0__OBSERVE_MUX_OUT02 0x0C8 0x328 0x000 0x7 0x0
#define MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x0CC 0x32C 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD2_DATA1__I2C4_SCL 0x0CC 0x32C 0x5BC 0x2 0x1
#define MX8MP_IOMUXC_SD2_DATA1__UART2_DCE_TX 0x0CC 0x32C 0x000 0x3 0x0
#define MX8MP_IOMUXC_SD2_DATA1__UART2_DTE_RX 0x0CC 0x32C 0x5F0 0x3 0x3
-#define MX8MP_IOMUXC_SD2_DATA1__AUDIOMIX_BIT_STREAM01 0x0CC 0x32C 0x4C4 0x4 0x1
+#define MX8MP_IOMUXC_SD2_DATA1__AUDIOMIX_PDM_BIT_STREAM01 0x0CC 0x32C 0x4C4 0x4 0x2
#define MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16 0x0CC 0x32C 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SD2_DATA1__CCMSRCGPCMIX_WAIT 0x0CC 0x32C 0x000 0x6 0x0
-#define MX8MP_IOMUXC_SD2_DATA1__OBSERVE_MUX_OUT03 0x0CC 0x32C 0x000 0x7 0x0
#define MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x0D0 0x330 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD2_DATA2__ECSPI2_SS0 0x0D0 0x330 0x574 0x2 0x0
-#define MX8MP_IOMUXC_SD2_DATA2__AUDIOMIX_SPDIF_OUT 0x0D0 0x330 0x000 0x3 0x0
-#define MX8MP_IOMUXC_SD2_DATA2__AUDIOMIX_BIT_STREAM02 0x0D0 0x330 0x4C8 0x4 0x1
+#define MX8MP_IOMUXC_SD2_DATA2__AUDIOMIX_SPDIF1_OUT 0x0D0 0x330 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__AUDIOMIX_PDM_BIT_STREAM02 0x0D0 0x330 0x4C8 0x4 0x2
#define MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x0D0 0x330 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SD2_DATA2__CCMSRCGPCMIX_STOP 0x0D0 0x330 0x000 0x6 0x0
-#define MX8MP_IOMUXC_SD2_DATA2__OBSERVE_MUX_OUT04 0x0D0 0x330 0x000 0x7 0x0
#define MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x0D4 0x334 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD2_DATA3__ECSPI2_MISO 0x0D4 0x334 0x56C 0x2 0x0
-#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_SPDIF_IN 0x0D4 0x334 0x544 0x3 0x1
-#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_BIT_STREAM03 0x0D4 0x334 0x4CC 0x4 0x2
+#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_SPDIF1_IN 0x0D4 0x334 0x544 0x3 0x1
+#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_PDM_BIT_STREAM03 0x0D4 0x334 0x4CC 0x4 0x2
#define MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x0D4 0x334 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET 0x0D4 0x334 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__SRC_EARLY_RESET 0x0D4 0x334 0x000 0x6 0x0
#define MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B 0x0D8 0x338 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x0D8 0x338 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET 0x0D8 0x338 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_RESET_B__SRC_SYSTEM_RESET 0x0D8 0x338 0x000 0x6 0x0
#define MX8MP_IOMUXC_SD2_WP__USDHC2_WP 0x0DC 0x33C 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x0DC 0x33C 0x000 0x5 0x0
#define MX8MP_IOMUXC_SD2_WP__CORESIGHT_EVENTI 0x0DC 0x33C 0x000 0x6 0x0
-#define MX8MP_IOMUXC_SD2_WP__SIM_M_HMASTLOCK 0x0DC 0x33C 0x000 0x7 0x0
-#define MX8MP_IOMUXC_NAND_ALE__RAWNAND_ALE 0x0E0 0x340 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_ALE__NAND_ALE 0x0E0 0x340 0x000 0x0 0x0
#define MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x0E0 0x340 0x000 0x1 0x0
#define MX8MP_IOMUXC_NAND_ALE__AUDIOMIX_SAI3_TX_BCLK 0x0E0 0x340 0x4E8 0x2 0x0
-#define MX8MP_IOMUXC_NAND_ALE__MEDIAMIX_ISP_FL_TRIG_0 0x0E0 0x340 0x5D4 0x3 0x1
+#define MX8MP_IOMUXC_NAND_ALE__ISP_FL_TRIG_0 0x0E0 0x340 0x5D4 0x3 0x1
#define MX8MP_IOMUXC_NAND_ALE__UART3_DCE_RX 0x0E0 0x340 0x5F8 0x4 0x2
#define MX8MP_IOMUXC_NAND_ALE__UART3_DTE_TX 0x0E0 0x340 0x000 0x4 0x0
#define MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x0E0 0x340 0x000 0x5 0x0
#define MX8MP_IOMUXC_NAND_ALE__CORESIGHT_TRACE_CLK 0x0E0 0x340 0x000 0x6 0x0
-#define MX8MP_IOMUXC_NAND_ALE__SIM_M_HPROT00 0x0E0 0x340 0x000 0x7 0x0
-#define MX8MP_IOMUXC_NAND_CE0_B__RAWNAND_CE0_B 0x0E4 0x344 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__NAND_CE0_B 0x0E4 0x344 0x000 0x0 0x0
#define MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x0E4 0x344 0x000 0x1 0x0
#define MX8MP_IOMUXC_NAND_CE0_B__AUDIOMIX_SAI3_TX_DATA00 0x0E4 0x344 0x000 0x2 0x0
-#define MX8MP_IOMUXC_NAND_CE0_B__MEDIAMIX_ISP_SHUTTER_TRIG_0 0x0E4 0x344 0x5DC 0x3 0x1
+#define MX8MP_IOMUXC_NAND_CE0_B__ISP_SHUTTER_TRIG_0 0x0E4 0x344 0x5DC 0x3 0x1
#define MX8MP_IOMUXC_NAND_CE0_B__UART3_DCE_TX 0x0E4 0x344 0x000 0x4 0x0
#define MX8MP_IOMUXC_NAND_CE0_B__UART3_DTE_RX 0x0E4 0x344 0x5F8 0x4 0x3
#define MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01 0x0E4 0x344 0x000 0x5 0x0
#define MX8MP_IOMUXC_NAND_CE0_B__CORESIGHT_TRACE_CTL 0x0E4 0x344 0x000 0x6 0x0
-#define MX8MP_IOMUXC_NAND_CE0_B__SIM_M_HPROT01 0x0E4 0x344 0x000 0x7 0x0
-#define MX8MP_IOMUXC_NAND_CE1_B__RAWNAND_CE1_B 0x0E8 0x348 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__NAND_CE1_B 0x0E8 0x348 0x000 0x0 0x0
#define MX8MP_IOMUXC_NAND_CE1_B__FLEXSPI_A_SS1_B 0x0E8 0x348 0x000 0x1 0x0
#define MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x0E8 0x348 0x630 0x2 0x1
#define MX8MP_IOMUXC_NAND_CE1_B__I2C4_SCL 0x0E8 0x348 0x5BC 0x4 0x2
#define MX8MP_IOMUXC_NAND_CE1_B__GPIO3_IO02 0x0E8 0x348 0x000 0x5 0x0
#define MX8MP_IOMUXC_NAND_CE1_B__CORESIGHT_TRACE00 0x0E8 0x348 0x000 0x6 0x0
-#define MX8MP_IOMUXC_NAND_CE1_B__SIM_M_HPROT02 0x0E8 0x348 0x000 0x7 0x0
-#define MX8MP_IOMUXC_NAND_CE2_B__RAWNAND_CE2_B 0x0EC 0x34C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__NAND_CE2_B 0x0EC 0x34C 0x000 0x0 0x0
#define MX8MP_IOMUXC_NAND_CE2_B__FLEXSPI_B_SS0_B 0x0EC 0x34C 0x000 0x1 0x0
#define MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x0EC 0x34C 0x624 0x2 0x1
#define MX8MP_IOMUXC_NAND_CE2_B__I2C4_SDA 0x0EC 0x34C 0x5C0 0x4 0x2
#define MX8MP_IOMUXC_NAND_CE2_B__GPIO3_IO03 0x0EC 0x34C 0x000 0x5 0x0
#define MX8MP_IOMUXC_NAND_CE2_B__CORESIGHT_TRACE01 0x0EC 0x34C 0x000 0x6 0x0
-#define MX8MP_IOMUXC_NAND_CE2_B__SIM_M_HPROT03 0x0EC 0x34C 0x000 0x7 0x0
-#define MX8MP_IOMUXC_NAND_CE3_B__RAWNAND_CE3_B 0x0F0 0x350 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__NAND_CE3_B 0x0F0 0x350 0x000 0x0 0x0
#define MX8MP_IOMUXC_NAND_CE3_B__FLEXSPI_B_SS1_B 0x0F0 0x350 0x000 0x1 0x0
#define MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x0F0 0x350 0x628 0x2 0x1
#define MX8MP_IOMUXC_NAND_CE3_B__I2C3_SDA 0x0F0 0x350 0x5B8 0x4 0x1
#define MX8MP_IOMUXC_NAND_CE3_B__GPIO3_IO04 0x0F0 0x350 0x000 0x5 0x0
#define MX8MP_IOMUXC_NAND_CE3_B__CORESIGHT_TRACE02 0x0F0 0x350 0x000 0x6 0x0
-#define MX8MP_IOMUXC_NAND_CE3_B__SIM_M_HADDR00 0x0F0 0x350 0x000 0x7 0x0
-#define MX8MP_IOMUXC_NAND_CLE__RAWNAND_CLE 0x0F4 0x354 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CLE__NAND_CLE 0x0F4 0x354 0x000 0x0 0x0
#define MX8MP_IOMUXC_NAND_CLE__FLEXSPI_B_SCLK 0x0F4 0x354 0x000 0x1 0x0
#define MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x0F4 0x354 0x62C 0x2 0x1
#define MX8MP_IOMUXC_NAND_CLE__UART4_DCE_RX 0x0F4 0x354 0x600 0x4 0x2
#define MX8MP_IOMUXC_NAND_CLE__UART4_DTE_TX 0x0F4 0x354 0x000 0x4 0x0
#define MX8MP_IOMUXC_NAND_CLE__GPIO3_IO05 0x0F4 0x354 0x000 0x5 0x0
#define MX8MP_IOMUXC_NAND_CLE__CORESIGHT_TRACE03 0x0F4 0x354 0x000 0x6 0x0
-#define MX8MP_IOMUXC_NAND_CLE__SIM_M_HADDR01 0x0F4 0x354 0x000 0x7 0x0
-#define MX8MP_IOMUXC_NAND_DATA00__RAWNAND_DATA00 0x0F8 0x358 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__NAND_DATA00 0x0F8 0x358 0x000 0x0 0x0
#define MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x0F8 0x358 0x000 0x1 0x0
#define MX8MP_IOMUXC_NAND_DATA00__AUDIOMIX_SAI3_RX_DATA00 0x0F8 0x358 0x4E4 0x2 0x0
-#define MX8MP_IOMUXC_NAND_DATA00__MEDIAMIX_ISP_FLASH_TRIG_0 0x0F8 0x358 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__ISP_FLASH_TRIG_0 0x0F8 0x358 0x000 0x3 0x0
#define MX8MP_IOMUXC_NAND_DATA00__UART4_DCE_RX 0x0F8 0x358 0x600 0x4 0x3
#define MX8MP_IOMUXC_NAND_DATA00__UART4_DTE_TX 0x0F8 0x358 0x000 0x4 0x0
#define MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x0F8 0x358 0x000 0x5 0x0
#define MX8MP_IOMUXC_NAND_DATA00__CORESIGHT_TRACE04 0x0F8 0x358 0x000 0x6 0x0
-#define MX8MP_IOMUXC_NAND_DATA00__SIM_M_HADDR02 0x0F8 0x358 0x000 0x7 0x0
-#define MX8MP_IOMUXC_NAND_DATA01__RAWNAND_DATA01 0x0FC 0x35C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__NAND_DATA01 0x0FC 0x35C 0x000 0x0 0x0
#define MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x0FC 0x35C 0x000 0x1 0x0
#define MX8MP_IOMUXC_NAND_DATA01__AUDIOMIX_SAI3_TX_SYNC 0x0FC 0x35C 0x4EC 0x2 0x0
-#define MX8MP_IOMUXC_NAND_DATA01__MEDIAMIX_ISP_PRELIGHT_TRIG_0 0x0FC 0x35C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__ISP_PRELIGHT_TRIG_0 0x0FC 0x35C 0x000 0x3 0x0
#define MX8MP_IOMUXC_NAND_DATA01__UART4_DCE_TX 0x0FC 0x35C 0x000 0x4 0x0
#define MX8MP_IOMUXC_NAND_DATA01__UART4_DTE_RX 0x0FC 0x35C 0x600 0x4 0x4
#define MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x0FC 0x35C 0x000 0x5 0x0
#define MX8MP_IOMUXC_NAND_DATA01__CORESIGHT_TRACE05 0x0FC 0x35C 0x000 0x6 0x0
-#define MX8MP_IOMUXC_NAND_DATA01__SIM_M_HADDR03 0x0FC 0x35C 0x000 0x7 0x0
-#define MX8MP_IOMUXC_NAND_DATA02__RAWNAND_DATA02 0x100 0x360 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__NAND_DATA02 0x100 0x360 0x000 0x0 0x0
#define MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x100 0x360 0x000 0x1 0x0
#define MX8MP_IOMUXC_NAND_DATA02__USDHC3_CD_B 0x100 0x360 0x608 0x2 0x2
#define MX8MP_IOMUXC_NAND_DATA02__UART4_DCE_CTS 0x100 0x360 0x000 0x3 0x0
@@ -396,82 +330,71 @@
#define MX8MP_IOMUXC_NAND_DATA02__I2C4_SDA 0x100 0x360 0x5C0 0x4 0x3
#define MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x100 0x360 0x000 0x5 0x0
#define MX8MP_IOMUXC_NAND_DATA02__CORESIGHT_TRACE06 0x100 0x360 0x000 0x6 0x0
-#define MX8MP_IOMUXC_NAND_DATA02__SIM_M_HADDR04 0x100 0x360 0x000 0x7 0x0
-#define MX8MP_IOMUXC_NAND_DATA03__RAWNAND_DATA03 0x104 0x364 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__NAND_DATA03 0x104 0x364 0x000 0x0 0x0
#define MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x104 0x364 0x000 0x1 0x0
#define MX8MP_IOMUXC_NAND_DATA03__USDHC3_WP 0x104 0x364 0x634 0x2 0x2
#define MX8MP_IOMUXC_NAND_DATA03__UART4_DCE_RTS 0x104 0x364 0x5FC 0x3 0x1
#define MX8MP_IOMUXC_NAND_DATA03__UART4_DTE_CTS 0x104 0x364 0x000 0x3 0x0
-#define MX8MP_IOMUXC_NAND_DATA03__MEDIAMIX_ISP_FL_TRIG_1 0x104 0x364 0x5D8 0x4 0x1
+#define MX8MP_IOMUXC_NAND_DATA03__ISP_FL_TRIG_1 0x104 0x364 0x5D8 0x4 0x1
#define MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x104 0x364 0x000 0x5 0x0
#define MX8MP_IOMUXC_NAND_DATA03__CORESIGHT_TRACE07 0x104 0x364 0x000 0x6 0x0
-#define MX8MP_IOMUXC_NAND_DATA03__SIM_M_HADDR05 0x104 0x364 0x000 0x7 0x0
-#define MX8MP_IOMUXC_NAND_DATA04__RAWNAND_DATA04 0x108 0x368 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__NAND_DATA04 0x108 0x368 0x000 0x0 0x0
#define MX8MP_IOMUXC_NAND_DATA04__FLEXSPI_B_DATA00 0x108 0x368 0x000 0x1 0x0
#define MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x108 0x368 0x610 0x2 0x1
#define MX8MP_IOMUXC_NAND_DATA04__FLEXSPI_A_DATA04 0x108 0x368 0x000 0x3 0x0
-#define MX8MP_IOMUXC_NAND_DATA04__MEDIAMIX_ISP_SHUTTER_TRIG_1 0x108 0x368 0x5E0 0x4 0x1
+#define MX8MP_IOMUXC_NAND_DATA04__ISP_SHUTTER_TRIG_1 0x108 0x368 0x5E0 0x4 0x1
#define MX8MP_IOMUXC_NAND_DATA04__GPIO3_IO10 0x108 0x368 0x000 0x5 0x0
#define MX8MP_IOMUXC_NAND_DATA04__CORESIGHT_TRACE08 0x108 0x368 0x000 0x6 0x0
-#define MX8MP_IOMUXC_NAND_DATA04__SIM_M_HADDR06 0x108 0x368 0x000 0x7 0x0
-#define MX8MP_IOMUXC_NAND_DATA05__RAWNAND_DATA05 0x10C 0x36C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__NAND_DATA05 0x10C 0x36C 0x000 0x0 0x0
#define MX8MP_IOMUXC_NAND_DATA05__FLEXSPI_B_DATA01 0x10C 0x36C 0x000 0x1 0x0
#define MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x10C 0x36C 0x614 0x2 0x1
#define MX8MP_IOMUXC_NAND_DATA05__FLEXSPI_A_DATA05 0x10C 0x36C 0x000 0x3 0x0
-#define MX8MP_IOMUXC_NAND_DATA05__MEDIAMIX_ISP_FLASH_TRIG_1 0x10C 0x36C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__ISP_FLASH_TRIG_1 0x10C 0x36C 0x000 0x4 0x0
#define MX8MP_IOMUXC_NAND_DATA05__GPIO3_IO11 0x10C 0x36C 0x000 0x5 0x0
#define MX8MP_IOMUXC_NAND_DATA05__CORESIGHT_TRACE09 0x10C 0x36C 0x000 0x6 0x0
-#define MX8MP_IOMUXC_NAND_DATA05__SIM_M_HADDR07 0x10C 0x36C 0x000 0x7 0x0
-#define MX8MP_IOMUXC_NAND_DATA06__RAWNAND_DATA06 0x110 0x370 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__NAND_DATA06 0x110 0x370 0x000 0x0 0x0
#define MX8MP_IOMUXC_NAND_DATA06__FLEXSPI_B_DATA02 0x110 0x370 0x000 0x1 0x0
#define MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x110 0x370 0x618 0x2 0x1
#define MX8MP_IOMUXC_NAND_DATA06__FLEXSPI_A_DATA06 0x110 0x370 0x000 0x3 0x0
-#define MX8MP_IOMUXC_NAND_DATA06__MEDIAMIX_ISP_PRELIGHT_TRIG_1 0x110 0x370 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__ISP_PRELIGHT_TRIG_1 0x110 0x370 0x000 0x4 0x0
#define MX8MP_IOMUXC_NAND_DATA06__GPIO3_IO12 0x110 0x370 0x000 0x5 0x0
#define MX8MP_IOMUXC_NAND_DATA06__CORESIGHT_TRACE10 0x110 0x370 0x000 0x6 0x0
-#define MX8MP_IOMUXC_NAND_DATA06__SIM_M_HADDR08 0x110 0x370 0x000 0x7 0x0
-#define MX8MP_IOMUXC_NAND_DATA07__RAWNAND_DATA07 0x114 0x374 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__NAND_DATA07 0x114 0x374 0x000 0x0 0x0
#define MX8MP_IOMUXC_NAND_DATA07__FLEXSPI_B_DATA03 0x114 0x374 0x000 0x1 0x0
#define MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x114 0x374 0x61C 0x2 0x1
#define MX8MP_IOMUXC_NAND_DATA07__FLEXSPI_A_DATA07 0x114 0x374 0x000 0x3 0x0
-#define MX8MP_IOMUXC_NAND_DATA07__MEDIAMIX_ISP_SHUTTER_OPEN_1 0x114 0x374 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__ISP_SHUTTER_OPEN_1 0x114 0x374 0x000 0x4 0x0
#define MX8MP_IOMUXC_NAND_DATA07__GPIO3_IO13 0x114 0x374 0x000 0x5 0x0
#define MX8MP_IOMUXC_NAND_DATA07__CORESIGHT_TRACE11 0x114 0x374 0x000 0x6 0x0
-#define MX8MP_IOMUXC_NAND_DATA07__SIM_M_HADDR09 0x114 0x374 0x000 0x7 0x0
-#define MX8MP_IOMUXC_NAND_DQS__RAWNAND_DQS 0x118 0x378 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DQS__NAND_DQS 0x118 0x378 0x000 0x0 0x0
#define MX8MP_IOMUXC_NAND_DQS__FLEXSPI_A_DQS 0x118 0x378 0x000 0x1 0x0
#define MX8MP_IOMUXC_NAND_DQS__AUDIOMIX_SAI3_MCLK 0x118 0x378 0x4E0 0x2 0x0
-#define MX8MP_IOMUXC_NAND_DQS__MEDIAMIX_ISP_SHUTTER_OPEN_0 0x118 0x378 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DQS__ISP_SHUTTER_OPEN_0 0x118 0x378 0x000 0x3 0x0
#define MX8MP_IOMUXC_NAND_DQS__I2C3_SCL 0x118 0x378 0x5B4 0x4 0x1
#define MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x118 0x378 0x000 0x5 0x0
#define MX8MP_IOMUXC_NAND_DQS__CORESIGHT_TRACE12 0x118 0x378 0x000 0x6 0x0
-#define MX8MP_IOMUXC_NAND_DQS__SIM_M_HADDR10 0x118 0x378 0x000 0x7 0x0
-#define MX8MP_IOMUXC_NAND_RE_B__RAWNAND_RE_B 0x11C 0x37C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__NAND_RE_B 0x11C 0x37C 0x000 0x0 0x0
#define MX8MP_IOMUXC_NAND_RE_B__FLEXSPI_B_DQS 0x11C 0x37C 0x000 0x1 0x0
#define MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x11C 0x37C 0x620 0x2 0x1
#define MX8MP_IOMUXC_NAND_RE_B__UART4_DCE_TX 0x11C 0x37C 0x000 0x4 0x0
#define MX8MP_IOMUXC_NAND_RE_B__UART4_DTE_RX 0x11C 0x37C 0x600 0x4 0x5
#define MX8MP_IOMUXC_NAND_RE_B__GPIO3_IO15 0x11C 0x37C 0x000 0x5 0x0
#define MX8MP_IOMUXC_NAND_RE_B__CORESIGHT_TRACE13 0x11C 0x37C 0x000 0x6 0x0
-#define MX8MP_IOMUXC_NAND_RE_B__SIM_M_HADDR11 0x11C 0x37C 0x000 0x7 0x0
-#define MX8MP_IOMUXC_NAND_READY_B__RAWNAND_READY_B 0x120 0x380 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__NAND_READY_B 0x120 0x380 0x000 0x0 0x0
#define MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x120 0x380 0x000 0x2 0x0
#define MX8MP_IOMUXC_NAND_READY_B__I2C3_SCL 0x120 0x380 0x5B4 0x4 0x2
#define MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x120 0x380 0x000 0x5 0x0
#define MX8MP_IOMUXC_NAND_READY_B__CORESIGHT_TRACE14 0x120 0x380 0x000 0x6 0x0
-#define MX8MP_IOMUXC_NAND_READY_B__SIM_M_HADDR12 0x120 0x380 0x000 0x7 0x0
-#define MX8MP_IOMUXC_NAND_WE_B__RAWNAND_WE_B 0x124 0x384 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_WE_B__NAND_WE_B 0x124 0x384 0x000 0x0 0x0
#define MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x124 0x384 0x604 0x2 0x1
#define MX8MP_IOMUXC_NAND_WE_B__I2C3_SDA 0x124 0x384 0x5B8 0x4 0x2
#define MX8MP_IOMUXC_NAND_WE_B__GPIO3_IO17 0x124 0x384 0x000 0x5 0x0
#define MX8MP_IOMUXC_NAND_WE_B__CORESIGHT_TRACE15 0x124 0x384 0x000 0x6 0x0
-#define MX8MP_IOMUXC_NAND_WE_B__SIM_M_HADDR13 0x124 0x384 0x000 0x7 0x0
-#define MX8MP_IOMUXC_NAND_WP_B__RAWNAND_WP_B 0x128 0x388 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_WP_B__NAND_WP_B 0x128 0x388 0x000 0x0 0x0
#define MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x128 0x388 0x60C 0x2 0x1
#define MX8MP_IOMUXC_NAND_WP_B__I2C4_SCL 0x128 0x388 0x5BC 0x4 0x3
#define MX8MP_IOMUXC_NAND_WP_B__GPIO3_IO18 0x128 0x388 0x000 0x5 0x0
#define MX8MP_IOMUXC_NAND_WP_B__CORESIGHT_EVENTO 0x128 0x388 0x000 0x6 0x0
-#define MX8MP_IOMUXC_NAND_WP_B__SIM_M_HADDR14 0x128 0x388 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI5_RX_SYNC 0x12C 0x38C 0x508 0x0 0x0
#define MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00 0x12C 0x38C 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT 0x12C 0x38C 0x000 0x2 0x0
@@ -481,33 +404,33 @@
#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_SAI1_TX_DATA01 0x130 0x390 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI5_RXC__PWM3_OUT 0x130 0x390 0x000 0x2 0x0
#define MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA 0x130 0x390 0x5D0 0x3 0x1
-#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_CLK 0x130 0x390 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_PDM_CLK 0x130 0x390 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x130 0x390 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI5_RX_DATA00 0x134 0x394 0x4F8 0x0 0x0
#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI1_TX_DATA02 0x134 0x394 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT 0x134 0x394 0x000 0x2 0x0
#define MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL 0x134 0x394 0x5C4 0x3 0x1
-#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_BIT_STREAM00 0x134 0x394 0x4C0 0x4 0x3
+#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_PDM_BIT_STREAM00 0x134 0x394 0x4C0 0x4 0x3
#define MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x134 0x394 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_RX_DATA01 0x138 0x398 0x4FC 0x0 0x0
#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_DATA03 0x138 0x398 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC 0x138 0x398 0x4D8 0x2 0x0
#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC 0x138 0x398 0x510 0x3 0x0
-#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_BIT_STREAM01 0x138 0x398 0x4C4 0x4 0x3
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_PDM_BIT_STREAM01 0x138 0x398 0x4C4 0x4 0x3
#define MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22 0x138 0x398 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x138 0x398 0x000 0x6 0x0
#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_RX_DATA02 0x13C 0x39C 0x500 0x0 0x0
#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_DATA04 0x13C 0x39C 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_SYNC 0x13C 0x39C 0x4D8 0x2 0x1
#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK 0x13C 0x39C 0x50C 0x3 0x0
-#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_BIT_STREAM02 0x13C 0x39C 0x4C8 0x4 0x3
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_PDM_BIT_STREAM02 0x13C 0x39C 0x4C8 0x4 0x3
#define MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x13C 0x39C 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x13C 0x39C 0x54C 0x6 0x0
#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_RX_DATA03 0x140 0x3A0 0x504 0x0 0x0
#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_DATA05 0x140 0x3A0 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_SYNC 0x140 0x3A0 0x4D8 0x2 0x2
#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00 0x140 0x3A0 0x000 0x3 0x0
-#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_BIT_STREAM03 0x140 0x3A0 0x4CC 0x4 0x3
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_PDM_BIT_STREAM03 0x140 0x3A0 0x4CC 0x4 0x3
#define MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x140 0x3A0 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x140 0x3A0 0x000 0x6 0x0
#define MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK 0x144 0x3A4 0x4F0 0x0 0x0
@@ -517,33 +440,27 @@
#define MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25 0x144 0x3A4 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x144 0x3A4 0x550 0x6 0x0
#define MX8MP_IOMUXC_SAI1_RXFS__AUDIOMIX_SAI1_RX_SYNC 0x148 0x3A8 0x4D0 0x0 0x0
-#define MX8MP_IOMUXC_SAI1_RXFS__AUDIOMIX_SAI5_RX_SYNC 0x148 0x3A8 0x508 0x1 0x1
#define MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x148 0x3A8 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x148 0x3A8 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_SAI1_RX_BCLK 0x14C 0x3AC 0x000 0x0 0x0
-#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_SAI5_RX_BCLK 0x14C 0x3AC 0x4F4 0x1 0x1
-#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_CLK 0x14C 0x3AC 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_PDM_CLK 0x14C 0x3AC 0x000 0x3 0x0
#define MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x14C 0x3AC 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x14C 0x3AC 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00 0x150 0x3B0 0x000 0x0 0x0
-#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI5_RX_DATA00 0x150 0x3B0 0x4F8 0x1 0x1
#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_TX_DATA01 0x150 0x3B0 0x000 0x2 0x0
-#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_BIT_STREAM00 0x150 0x3B0 0x4C0 0x3 0x4
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_PDM_BIT_STREAM00 0x150 0x3B0 0x4C0 0x3 0x4
#define MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN 0x150 0x3B0 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x150 0x3B0 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI1_RX_DATA01 0x154 0x3B4 0x000 0x0 0x0
-#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI5_RX_DATA01 0x154 0x3B4 0x4FC 0x1 0x1
-#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_BIT_STREAM01 0x154 0x3B4 0x4C4 0x3 0x4
+#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_PDM_BIT_STREAM01 0x154 0x3B4 0x4C4 0x3 0x4
#define MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT 0x154 0x3B4 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x154 0x3B4 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI1_RX_DATA02 0x158 0x3B8 0x000 0x0 0x0
-#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI5_RX_DATA02 0x158 0x3B8 0x500 0x1 0x1
-#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_BIT_STREAM02 0x158 0x3B8 0x4C8 0x3 0x4
+#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_PDM_BIT_STREAM02 0x158 0x3B8 0x4C8 0x3 0x4
#define MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x158 0x3B8 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04 0x158 0x3B8 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI1_RX_DATA03 0x15C 0x3BC 0x000 0x0 0x0
-#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI5_RX_DATA03 0x15C 0x3BC 0x504 0x1 0x1
-#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_BIT_STREAM03 0x15C 0x3BC 0x4CC 0x3 0x4
+#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_PDM_BIT_STREAM03 0x15C 0x3BC 0x4CC 0x3 0x4
#define MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x15C 0x3BC 0x57C 0x4 0x1
#define MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05 0x15C 0x3BC 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI1_RX_DATA04 0x160 0x3C0 0x000 0x0 0x0
@@ -569,27 +486,21 @@
#define MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x16C 0x3CC 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09 0x16C 0x3CC 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_TXFS__AUDIOMIX_SAI1_TX_SYNC 0x170 0x3D0 0x4D8 0x0 0x4
-#define MX8MP_IOMUXC_SAI1_TXFS__AUDIOMIX_SAI5_TX_SYNC 0x170 0x3D0 0x510 0x1 0x1
#define MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x170 0x3D0 0x588 0x4 0x1
#define MX8MP_IOMUXC_SAI1_TXFS__GPIO4_IO10 0x170 0x3D0 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_TXC__AUDIOMIX_SAI1_TX_BCLK 0x174 0x3D4 0x4D4 0x0 0x1
-#define MX8MP_IOMUXC_SAI1_TXC__AUDIOMIX_SAI5_TX_BCLK 0x174 0x3D4 0x50C 0x1 0x1
#define MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x174 0x3D4 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11 0x174 0x3D4 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_TXD0__AUDIOMIX_SAI1_TX_DATA00 0x178 0x3D8 0x000 0x0 0x0
-#define MX8MP_IOMUXC_SAI1_TXD0__AUDIOMIX_SAI5_TX_DATA00 0x178 0x3D8 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x178 0x3D8 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12 0x178 0x3D8 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_TXD1__AUDIOMIX_SAI1_TX_DATA01 0x17C 0x3DC 0x000 0x0 0x0
-#define MX8MP_IOMUXC_SAI1_TXD1__AUDIOMIX_SAI5_TX_DATA01 0x17C 0x3DC 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x17C 0x3DC 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI1_TXD1__GPIO4_IO13 0x17C 0x3DC 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_TXD2__AUDIOMIX_SAI1_TX_DATA02 0x180 0x3E0 0x000 0x0 0x0
-#define MX8MP_IOMUXC_SAI1_TXD2__AUDIOMIX_SAI5_TX_DATA02 0x180 0x3E0 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x180 0x3E0 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14 0x180 0x3E0 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_TXD3__AUDIOMIX_SAI1_TX_DATA03 0x184 0x3E4 0x000 0x0 0x0
-#define MX8MP_IOMUXC_SAI1_TXD3__AUDIOMIX_SAI5_TX_DATA03 0x184 0x3E4 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x184 0x3E4 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI1_TXD3__GPIO4_IO15 0x184 0x3E4 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_TXD4__AUDIOMIX_SAI1_TX_DATA04 0x188 0x3E8 0x000 0x0 0x0
@@ -609,11 +520,10 @@
#define MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x190 0x3F0 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI1_TX_DATA07 0x194 0x3F4 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI6_MCLK 0x194 0x3F4 0x514 0x1 0x2
-#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_CLK 0x194 0x3F4 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_PDM_CLK 0x194 0x3F4 0x000 0x3 0x0
#define MX8MP_IOMUXC_SAI1_TXD7__ENET1_TX_ER 0x194 0x3F4 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x194 0x3F4 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK 0x198 0x3F8 0x000 0x0 0x0
-#define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI5_MCLK 0x198 0x3F8 0x4F0 0x1 0x1
#define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_TX_BCLK 0x198 0x3F8 0x4D4 0x2 0x2
#define MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK 0x198 0x3F8 0x578 0x4 0x1
#define MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x198 0x3F8 0x000 0x5 0x0
@@ -624,16 +534,14 @@
#define MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX 0x19C 0x3FC 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI2_RXFS__UART1_DTE_RX 0x19C 0x3FC 0x5E8 0x4 0x2
#define MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x19C 0x3FC 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_BIT_STREAM02 0x19C 0x3FC 0x4C8 0x6 0x5
-#define MX8MP_IOMUXC_SAI2_RXFS__SIM_M_HSIZE00 0x19C 0x3FC 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_PDM_BIT_STREAM02 0x19C 0x3FC 0x4C8 0x6 0x5
#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI2_RX_BCLK 0x1A0 0x400 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI5_TX_BCLK 0x1A0 0x400 0x50C 0x1 0x2
#define MX8MP_IOMUXC_SAI2_RXC__CAN1_TX 0x1A0 0x400 0x000 0x3 0x0
#define MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX 0x1A0 0x400 0x5E8 0x4 0x3
#define MX8MP_IOMUXC_SAI2_RXC__UART1_DTE_TX 0x1A0 0x400 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x1A0 0x400 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_BIT_STREAM01 0x1A0 0x400 0x4C4 0x6 0x5
-#define MX8MP_IOMUXC_SAI2_RXC__SIM_M_HSIZE01 0x1A0 0x400 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_PDM_BIT_STREAM01 0x1A0 0x400 0x4C4 0x6 0x5
#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0x1A4 0x404 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI5_TX_DATA00 0x1A4 0x404 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI2_RXD0__ENET_QOS_1588_EVENT2_OUT 0x1A4 0x404 0x000 0x2 0x0
@@ -641,8 +549,7 @@
#define MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x1A4 0x404 0x5E4 0x4 0x2
#define MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS 0x1A4 0x404 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23 0x1A4 0x404 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_BIT_STREAM03 0x1A4 0x404 0x4CC 0x6 0x5
-#define MX8MP_IOMUXC_SAI2_RXD0__SIM_M_HSIZE02 0x1A4 0x404 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_PDM_BIT_STREAM03 0x1A4 0x404 0x4CC 0x6 0x5
#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0x1A8 0x408 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI5_TX_DATA01 0x1A8 0x408 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI2_TXFS__ENET_QOS_1588_EVENT3_OUT 0x1A8 0x408 0x000 0x2 0x0
@@ -650,22 +557,18 @@
#define MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS 0x1A8 0x408 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS 0x1A8 0x408 0x5E4 0x4 0x3
#define MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x1A8 0x408 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_BIT_STREAM02 0x1A8 0x408 0x4C8 0x6 0x6
-#define MX8MP_IOMUXC_SAI2_TXFS__SIM_M_HWRITE 0x1A8 0x408 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_PDM_BIT_STREAM02 0x1A8 0x408 0x4C8 0x6 0x6
#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0x1AC 0x40C 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI5_TX_DATA02 0x1AC 0x40C 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI2_TXC__CAN1_RX 0x1AC 0x40C 0x54C 0x3 0x1
#define MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x1AC 0x40C 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_BIT_STREAM01 0x1AC 0x40C 0x4C4 0x6 0x6
-#define MX8MP_IOMUXC_SAI2_TXC__SIM_M_HREADYOUT 0x1AC 0x40C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_PDM_BIT_STREAM01 0x1AC 0x40C 0x4C4 0x6 0x6
#define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0x1B0 0x410 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI5_TX_DATA03 0x1B0 0x410 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_IN 0x1B0 0x410 0x000 0x2 0x0
#define MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX 0x1B0 0x410 0x000 0x3 0x0
#define MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_AUX_IN 0x1B0 0x410 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26 0x1B0 0x410 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_TXD0__CCMSRCGPCMIX_BOOT_MODE04 0x1B0 0x410 0x000 0x6 0x0
-#define MX8MP_IOMUXC_SAI2_TXD0__TPSMP_CLK 0x1B0 0x410 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK 0x1B4 0x414 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI5_MCLK 0x1B4 0x414 0x4F0 0x1 0x2
#define MX8MP_IOMUXC_SAI2_MCLK__ENET_QOS_1588_EVENT3_IN 0x1B4 0x414 0x000 0x2 0x0
@@ -673,15 +576,13 @@
#define MX8MP_IOMUXC_SAI2_MCLK__ENET_QOS_1588_EVENT3_AUX_IN 0x1B4 0x414 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x1B4 0x414 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI3_MCLK 0x1B4 0x414 0x4E0 0x6 0x1
-#define MX8MP_IOMUXC_SAI2_MCLK__TPSMP_HDATA_DIR 0x1B4 0x414 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_SYNC 0x1B8 0x418 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI2_RX_DATA01 0x1B8 0x418 0x4DC 0x1 0x1
#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI5_RX_SYNC 0x1B8 0x418 0x508 0x2 0x2
#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_DATA01 0x1B8 0x418 0x000 0x3 0x0
-#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SPDIF_IN 0x1B8 0x418 0x544 0x4 0x2
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SPDIF1_IN 0x1B8 0x418 0x544 0x4 0x2
#define MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x1B8 0x418 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_BIT_STREAM00 0x1B8 0x418 0x4C0 0x6 0x5
-#define MX8MP_IOMUXC_SAI3_RXFS__TPSMP_HTRANS00 0x1B8 0x418 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_PDM_BIT_STREAM00 0x1B8 0x418 0x4C0 0x6 0x5
#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI3_RX_BCLK 0x1BC 0x41C 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI2_RX_DATA02 0x1BC 0x41C 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI5_RX_BCLK 0x1BC 0x41C 0x4F4 0x2 0x2
@@ -689,16 +590,14 @@
#define MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS 0x1BC 0x41C 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI3_RXC__UART2_DTE_RTS 0x1BC 0x41C 0x5EC 0x4 0x2
#define MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x1BC 0x41C 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_CLK 0x1BC 0x41C 0x000 0x6 0x0
-#define MX8MP_IOMUXC_SAI3_RXC__TPSMP_HTRANS01 0x1BC 0x41C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_PDM_CLK 0x1BC 0x41C 0x000 0x6 0x0
#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0x1C0 0x420 0x4E4 0x0 0x1
#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI2_RX_DATA03 0x1C0 0x420 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI5_RX_DATA00 0x1C0 0x420 0x4F8 0x2 0x2
#define MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS 0x1C0 0x420 0x5EC 0x4 0x3
#define MX8MP_IOMUXC_SAI3_RXD__UART2_DTE_CTS 0x1C0 0x420 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x1C0 0x420 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_BIT_STREAM01 0x1C0 0x420 0x4C4 0x6 0x7
-#define MX8MP_IOMUXC_SAI3_RXD__TPSMP_HDATA00 0x1C0 0x420 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_PDM_BIT_STREAM01 0x1C0 0x420 0x4C4 0x6 0x7
#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0x1C4 0x424 0x4EC 0x0 0x1
#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI2_TX_DATA01 0x1C4 0x424 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI5_RX_DATA01 0x1C4 0x424 0x4FC 0x2 0x2
@@ -706,8 +605,7 @@
#define MX8MP_IOMUXC_SAI3_TXFS__UART2_DCE_RX 0x1C4 0x424 0x5F0 0x4 0x4
#define MX8MP_IOMUXC_SAI3_TXFS__UART2_DTE_TX 0x1C4 0x424 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x1C4 0x424 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_BIT_STREAM03 0x1C4 0x424 0x4CC 0x6 0x6
-#define MX8MP_IOMUXC_SAI3_TXFS__TPSMP_HDATA01 0x1C4 0x424 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_PDM_BIT_STREAM03 0x1C4 0x424 0x4CC 0x6 0x6
#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0x1C8 0x428 0x4E8 0x0 0x1
#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI2_TX_DATA02 0x1C8 0x428 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI5_RX_DATA02 0x1C8 0x428 0x500 0x2 0x2
@@ -715,30 +613,26 @@
#define MX8MP_IOMUXC_SAI3_TXC__UART2_DCE_TX 0x1C8 0x428 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI3_TXC__UART2_DTE_RX 0x1C8 0x428 0x5F0 0x4 0x5
#define MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x1C8 0x428 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_BIT_STREAM02 0x1C8 0x428 0x4C8 0x6 0x7
-#define MX8MP_IOMUXC_SAI3_TXC__TPSMP_HDATA02 0x1C8 0x428 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_PDM_BIT_STREAM02 0x1C8 0x428 0x4C8 0x6 0x7
#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0x1CC 0x42C 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI2_TX_DATA03 0x1CC 0x42C 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI5_RX_DATA03 0x1CC 0x42C 0x504 0x2 0x2
#define MX8MP_IOMUXC_SAI3_TXD__GPT1_CAPTURE2 0x1CC 0x42C 0x598 0x3 0x0
-#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SPDIF_EXT_CLK 0x1CC 0x42C 0x548 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SPDIF1_EXT_CLK 0x1CC 0x42C 0x548 0x4 0x0
#define MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x1CC 0x42C 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI3_TXD__CCMSRCGPCMIX_BOOT_MODE05 0x1CC 0x42C 0x000 0x6 0x0
-#define MX8MP_IOMUXC_SAI3_TXD__TPSMP_HDATA03 0x1CC 0x42C 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0x1D0 0x430 0x4E0 0x0 0x2
#define MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT 0x1D0 0x430 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI5_MCLK 0x1D0 0x430 0x4F0 0x2 0x3
-#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SPDIF_OUT 0x1D0 0x430 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SPDIF1_OUT 0x1D0 0x430 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x1D0 0x430 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SPDIF_IN 0x1D0 0x430 0x544 0x6 0x3
-#define MX8MP_IOMUXC_SAI3_MCLK__TPSMP_HDATA04 0x1D0 0x430 0x000 0x7 0x0
-#define MX8MP_IOMUXC_SPDIF_TX__AUDIOMIX_SPDIF_OUT 0x1D4 0x434 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SPDIF1_IN 0x1D0 0x430 0x544 0x6 0x3
+#define MX8MP_IOMUXC_SPDIF_TX__AUDIOMIX_SPDIF1_OUT 0x1D4 0x434 0x000 0x0 0x0
#define MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT 0x1D4 0x434 0x000 0x1 0x0
#define MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x1D4 0x434 0x5C4 0x2 0x2
#define MX8MP_IOMUXC_SPDIF_TX__GPT1_COMPARE1 0x1D4 0x434 0x000 0x3 0x0
#define MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x1D4 0x434 0x000 0x4 0x0
#define MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03 0x1D4 0x434 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SPDIF_RX__AUDIOMIX_SPDIF_IN 0x1D8 0x438 0x544 0x0 0x4
+#define MX8MP_IOMUXC_SPDIF_RX__AUDIOMIX_SPDIF1_IN 0x1D8 0x438 0x544 0x0 0x4
#define MX8MP_IOMUXC_SPDIF_RX__PWM2_OUT 0x1D8 0x438 0x000 0x1 0x0
#define MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x1D8 0x438 0x5C8 0x2 0x2
#define MX8MP_IOMUXC_SPDIF_RX__GPT1_COMPARE2 0x1D8 0x438 0x000 0x3 0x0
@@ -746,7 +640,7 @@
#define MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04 0x1D8 0x438 0x000 0x5 0x0
#define MX8MP_IOMUXC_SPDIF_EXT_CLK__GPT1_COMPARE3 0x1DC 0x43C 0x000 0x3 0x0
#define MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x1DC 0x43C 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SPDIF_EXT_CLK__AUDIOMIX_SPDIF_EXT_CLK 0x1DC 0x43C 0x548 0x0 0x1
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__AUDIOMIX_SPDIF1_EXT_CLK 0x1DC 0x43C 0x548 0x0 0x1
#define MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT 0x1DC 0x43C 0x000 0x1 0x0
#define MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x1E0 0x440 0x558 0x0 0x0
#define MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX 0x1E0 0x440 0x5F8 0x1 0x4
@@ -754,125 +648,105 @@
#define MX8MP_IOMUXC_ECSPI1_SCLK__I2C1_SCL 0x1E0 0x440 0x5A4 0x2 0x1
#define MX8MP_IOMUXC_ECSPI1_SCLK__AUDIOMIX_SAI7_RX_SYNC 0x1E0 0x440 0x538 0x3 0x1
#define MX8MP_IOMUXC_ECSPI1_SCLK__GPIO5_IO06 0x1E0 0x440 0x000 0x5 0x0
-#define MX8MP_IOMUXC_ECSPI1_SCLK__TPSMP_HDATA08 0x1E0 0x440 0x000 0x7 0x0
#define MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x1E4 0x444 0x560 0x0 0x0
#define MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX 0x1E4 0x444 0x000 0x1 0x0
#define MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DTE_RX 0x1E4 0x444 0x5F8 0x1 0x5
#define MX8MP_IOMUXC_ECSPI1_MOSI__I2C1_SDA 0x1E4 0x444 0x5A8 0x2 0x1
#define MX8MP_IOMUXC_ECSPI1_MOSI__AUDIOMIX_SAI7_RX_BCLK 0x1E4 0x444 0x530 0x3 0x1
#define MX8MP_IOMUXC_ECSPI1_MOSI__GPIO5_IO07 0x1E4 0x444 0x000 0x5 0x0
-#define MX8MP_IOMUXC_ECSPI1_MOSI__TPSMP_HDATA09 0x1E4 0x444 0x000 0x7 0x0
#define MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x1E8 0x448 0x55C 0x0 0x0
#define MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS 0x1E8 0x448 0x000 0x1 0x0
#define MX8MP_IOMUXC_ECSPI1_MISO__UART3_DTE_RTS 0x1E8 0x448 0x5F4 0x1 0x2
#define MX8MP_IOMUXC_ECSPI1_MISO__I2C2_SCL 0x1E8 0x448 0x5AC 0x2 0x1
#define MX8MP_IOMUXC_ECSPI1_MISO__AUDIOMIX_SAI7_RX_DATA00 0x1E8 0x448 0x534 0x3 0x1
#define MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08 0x1E8 0x448 0x000 0x5 0x0
-#define MX8MP_IOMUXC_ECSPI1_MISO__TPSMP_HDATA10 0x1E8 0x448 0x000 0x7 0x0
#define MX8MP_IOMUXC_ECSPI1_SS0__ECSPI1_SS0 0x1EC 0x44C 0x564 0x0 0x0
#define MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS 0x1EC 0x44C 0x5F4 0x1 0x3
#define MX8MP_IOMUXC_ECSPI1_SS0__UART3_DTE_CTS 0x1EC 0x44C 0x000 0x1 0x0
#define MX8MP_IOMUXC_ECSPI1_SS0__I2C2_SDA 0x1EC 0x44C 0x5B0 0x2 0x1
#define MX8MP_IOMUXC_ECSPI1_SS0__AUDIOMIX_SAI7_TX_SYNC 0x1EC 0x44C 0x540 0x3 0x1
#define MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x1EC 0x44C 0x000 0x5 0x0
-#define MX8MP_IOMUXC_ECSPI1_SS0__TPSMP_HDATA11 0x1EC 0x44C 0x000 0x7 0x0
#define MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x1F0 0x450 0x568 0x0 0x1
#define MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DCE_RX 0x1F0 0x450 0x600 0x1 0x6
#define MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DTE_TX 0x1F0 0x450 0x000 0x1 0x0
#define MX8MP_IOMUXC_ECSPI2_SCLK__I2C3_SCL 0x1F0 0x450 0x5B4 0x2 0x3
#define MX8MP_IOMUXC_ECSPI2_SCLK__AUDIOMIX_SAI7_TX_BCLK 0x1F0 0x450 0x53C 0x3 0x1
#define MX8MP_IOMUXC_ECSPI2_SCLK__GPIO5_IO10 0x1F0 0x450 0x000 0x5 0x0
-#define MX8MP_IOMUXC_ECSPI2_SCLK__TPSMP_HDATA12 0x1F0 0x450 0x000 0x7 0x0
#define MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x1F4 0x454 0x570 0x0 0x1
#define MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DCE_TX 0x1F4 0x454 0x000 0x1 0x0
#define MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DTE_RX 0x1F4 0x454 0x600 0x1 0x7
#define MX8MP_IOMUXC_ECSPI2_MOSI__I2C3_SDA 0x1F4 0x454 0x5B8 0x2 0x3
#define MX8MP_IOMUXC_ECSPI2_MOSI__AUDIOMIX_SAI7_TX_DATA00 0x1F4 0x454 0x000 0x3 0x0
#define MX8MP_IOMUXC_ECSPI2_MOSI__GPIO5_IO11 0x1F4 0x454 0x000 0x5 0x0
-#define MX8MP_IOMUXC_ECSPI2_MOSI__TPSMP_HDATA13 0x1F4 0x454 0x000 0x7 0x0
#define MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12 0x1F8 0x458 0x000 0x5 0x0
-#define MX8MP_IOMUXC_ECSPI2_MISO__TPSMP_HDATA14 0x1F8 0x458 0x000 0x7 0x0
#define MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x1F8 0x458 0x56C 0x0 0x1
#define MX8MP_IOMUXC_ECSPI2_MISO__UART4_DCE_CTS 0x1F8 0x458 0x000 0x1 0x0
#define MX8MP_IOMUXC_ECSPI2_MISO__UART4_DTE_RTS 0x1F8 0x458 0x5FC 0x1 0x2
#define MX8MP_IOMUXC_ECSPI2_MISO__I2C4_SCL 0x1F8 0x458 0x5BC 0x2 0x4
#define MX8MP_IOMUXC_ECSPI2_MISO__AUDIOMIX_SAI7_MCLK 0x1F8 0x458 0x52C 0x3 0x1
-#define MX8MP_IOMUXC_ECSPI2_MISO__CCMSRCGPCMIX_CLKO1 0x1F8 0x458 0x000 0x4 0x0
+#define MX8MP_IOMUXC_ECSPI2_MISO__CCM_CLKO1 0x1F8 0x458 0x000 0x4 0x0
#define MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0 0x1FC 0x45C 0x574 0x0 0x1
#define MX8MP_IOMUXC_ECSPI2_SS0__UART4_DCE_RTS 0x1FC 0x45C 0x5FC 0x1 0x3
#define MX8MP_IOMUXC_ECSPI2_SS0__UART4_DTE_CTS 0x1FC 0x45C 0x000 0x1 0x0
#define MX8MP_IOMUXC_ECSPI2_SS0__I2C4_SDA 0x1FC 0x45C 0x5C0 0x2 0x4
-#define MX8MP_IOMUXC_ECSPI2_SS0__CCMSRCGPCMIX_CLKO2 0x1FC 0x45C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_ECSPI2_SS0__CCM_CLKO2 0x1FC 0x45C 0x000 0x4 0x0
#define MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x1FC 0x45C 0x000 0x5 0x0
-#define MX8MP_IOMUXC_ECSPI2_SS0__TPSMP_HDATA15 0x1FC 0x45C 0x000 0x7 0x0
#define MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x200 0x460 0x5A4 0x0 0x2
#define MX8MP_IOMUXC_I2C1_SCL__ENET_QOS_MDC 0x200 0x460 0x000 0x1 0x0
#define MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK 0x200 0x460 0x558 0x3 0x1
#define MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x200 0x460 0x000 0x5 0x0
-#define MX8MP_IOMUXC_I2C1_SCL__TPSMP_HDATA16 0x200 0x460 0x000 0x7 0x0
#define MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x204 0x464 0x5A8 0x0 0x2
#define MX8MP_IOMUXC_I2C1_SDA__ENET_QOS_MDIO 0x204 0x464 0x590 0x1 0x2
#define MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI 0x204 0x464 0x560 0x3 0x1
#define MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x204 0x464 0x000 0x5 0x0
-#define MX8MP_IOMUXC_I2C1_SDA__TPSMP_HDATA17 0x204 0x464 0x000 0x7 0x0
#define MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x208 0x468 0x5AC 0x0 0x2
#define MX8MP_IOMUXC_I2C2_SCL__ENET_QOS_1588_EVENT1_IN 0x208 0x468 0x000 0x1 0x0
#define MX8MP_IOMUXC_I2C2_SCL__USDHC3_CD_B 0x208 0x468 0x608 0x2 0x3
#define MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO 0x208 0x468 0x55C 0x3 0x1
#define MX8MP_IOMUXC_I2C2_SCL__ENET_QOS_1588_EVENT1_AUX_IN 0x208 0x468 0x000 0x4 0x0
#define MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x208 0x468 0x000 0x5 0x0
-#define MX8MP_IOMUXC_I2C2_SCL__TPSMP_HDATA18 0x208 0x468 0x000 0x7 0x0
#define MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x20C 0x46C 0x5B0 0x0 0x2
#define MX8MP_IOMUXC_I2C2_SDA__ENET_QOS_1588_EVENT1_OUT 0x20C 0x46C 0x000 0x1 0x0
#define MX8MP_IOMUXC_I2C2_SDA__USDHC3_WP 0x20C 0x46C 0x634 0x2 0x3
#define MX8MP_IOMUXC_I2C2_SDA__ECSPI1_SS0 0x20C 0x46C 0x564 0x3 0x1
#define MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x20C 0x46C 0x000 0x5 0x0
-#define MX8MP_IOMUXC_I2C2_SDA__TPSMP_HDATA19 0x20C 0x46C 0x000 0x7 0x0
#define MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x210 0x470 0x5B4 0x0 0x4
#define MX8MP_IOMUXC_I2C3_SCL__PWM4_OUT 0x210 0x470 0x000 0x1 0x0
#define MX8MP_IOMUXC_I2C3_SCL__GPT2_CLK 0x210 0x470 0x000 0x2 0x0
#define MX8MP_IOMUXC_I2C3_SCL__ECSPI2_SCLK 0x210 0x470 0x568 0x3 0x2
#define MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x210 0x470 0x000 0x5 0x0
-#define MX8MP_IOMUXC_I2C3_SCL__TPSMP_HDATA20 0x210 0x470 0x000 0x7 0x0
#define MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x214 0x474 0x5B8 0x0 0x4
#define MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT 0x214 0x474 0x000 0x1 0x0
#define MX8MP_IOMUXC_I2C3_SDA__GPT3_CLK 0x214 0x474 0x000 0x2 0x0
#define MX8MP_IOMUXC_I2C3_SDA__ECSPI2_MOSI 0x214 0x474 0x570 0x3 0x2
#define MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x214 0x474 0x000 0x5 0x0
-#define MX8MP_IOMUXC_I2C3_SDA__TPSMP_HDATA21 0x214 0x474 0x000 0x7 0x0
#define MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x218 0x478 0x5BC 0x0 0x5
#define MX8MP_IOMUXC_I2C4_SCL__PWM2_OUT 0x218 0x478 0x000 0x1 0x0
-#define MX8MP_IOMUXC_I2C4_SCL__HSIOMIX_PCIE_CLKREQ_B 0x218 0x478 0x5A0 0x2 0x0
+#define MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B 0x218 0x478 0x5A0 0x2 0x0
#define MX8MP_IOMUXC_I2C4_SCL__ECSPI2_MISO 0x218 0x478 0x56C 0x3 0x2
#define MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x218 0x478 0x000 0x5 0x0
-#define MX8MP_IOMUXC_I2C4_SCL__TPSMP_HDATA22 0x218 0x478 0x000 0x7 0x0
#define MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x21C 0x47C 0x5C0 0x0 0x5
#define MX8MP_IOMUXC_I2C4_SDA__PWM1_OUT 0x21C 0x47C 0x000 0x1 0x0
#define MX8MP_IOMUXC_I2C4_SDA__ECSPI2_SS0 0x21C 0x47C 0x574 0x3 0x2
#define MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x21C 0x47C 0x000 0x5 0x0
-#define MX8MP_IOMUXC_I2C4_SDA__TPSMP_HDATA23 0x21C 0x47C 0x000 0x7 0x0
#define MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x220 0x480 0x5E8 0x0 0x4
#define MX8MP_IOMUXC_UART1_RXD__UART1_DTE_TX 0x220 0x480 0x000 0x0 0x0
#define MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK 0x220 0x480 0x000 0x1 0x0
#define MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22 0x220 0x480 0x000 0x5 0x0
-#define MX8MP_IOMUXC_UART1_RXD__TPSMP_HDATA24 0x220 0x480 0x000 0x7 0x0
#define MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x224 0x484 0x000 0x0 0x0
#define MX8MP_IOMUXC_UART1_TXD__UART1_DTE_RX 0x224 0x484 0x5E8 0x0 0x5
#define MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI 0x224 0x484 0x000 0x1 0x0
#define MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23 0x224 0x484 0x000 0x5 0x0
-#define MX8MP_IOMUXC_UART1_TXD__TPSMP_HDATA25 0x224 0x484 0x000 0x7 0x0
#define MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x228 0x488 0x5F0 0x0 0x6
#define MX8MP_IOMUXC_UART2_RXD__UART2_DTE_TX 0x228 0x488 0x000 0x0 0x0
#define MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO 0x228 0x488 0x000 0x1 0x0
#define MX8MP_IOMUXC_UART2_RXD__GPT1_COMPARE3 0x228 0x488 0x000 0x3 0x0
#define MX8MP_IOMUXC_UART2_RXD__GPIO5_IO24 0x228 0x488 0x000 0x5 0x0
-#define MX8MP_IOMUXC_UART2_RXD__TPSMP_HDATA26 0x228 0x488 0x000 0x7 0x0
#define MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x22C 0x48C 0x000 0x0 0x0
#define MX8MP_IOMUXC_UART2_TXD__UART2_DTE_RX 0x22C 0x48C 0x5F0 0x0 0x7
#define MX8MP_IOMUXC_UART2_TXD__ECSPI3_SS0 0x22C 0x48C 0x000 0x1 0x0
#define MX8MP_IOMUXC_UART2_TXD__GPT1_COMPARE2 0x22C 0x48C 0x000 0x3 0x0
#define MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25 0x22C 0x48C 0x000 0x5 0x0
-#define MX8MP_IOMUXC_UART2_TXD__TPSMP_HDATA27 0x22C 0x48C 0x000 0x7 0x0
#define MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x230 0x490 0x5F8 0x0 0x6
#define MX8MP_IOMUXC_UART3_RXD__UART3_DTE_TX 0x230 0x490 0x000 0x0 0x0
#define MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS 0x230 0x490 0x000 0x1 0x0
@@ -881,7 +755,6 @@
#define MX8MP_IOMUXC_UART3_RXD__GPT1_CAPTURE2 0x230 0x490 0x598 0x3 0x1
#define MX8MP_IOMUXC_UART3_RXD__CAN2_TX 0x230 0x490 0x000 0x4 0x0
#define MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26 0x230 0x490 0x000 0x5 0x0
-#define MX8MP_IOMUXC_UART3_RXD__TPSMP_HDATA28 0x230 0x490 0x000 0x7 0x0
#define MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x234 0x494 0x000 0x0 0x0
#define MX8MP_IOMUXC_UART3_TXD__UART3_DTE_RX 0x234 0x494 0x5F8 0x0 0x7
#define MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS 0x234 0x494 0x5E4 0x1 0x5
@@ -890,16 +763,14 @@
#define MX8MP_IOMUXC_UART3_TXD__GPT1_CLK 0x234 0x494 0x59C 0x3 0x1
#define MX8MP_IOMUXC_UART3_TXD__CAN2_RX 0x234 0x494 0x550 0x4 0x2
#define MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27 0x234 0x494 0x000 0x5 0x0
-#define MX8MP_IOMUXC_UART3_TXD__TPSMP_HDATA29 0x234 0x494 0x000 0x7 0x0
#define MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x238 0x498 0x600 0x0 0x8
#define MX8MP_IOMUXC_UART4_RXD__UART4_DTE_TX 0x238 0x498 0x000 0x0 0x0
#define MX8MP_IOMUXC_UART4_RXD__UART2_DCE_CTS 0x238 0x498 0x000 0x1 0x0
#define MX8MP_IOMUXC_UART4_RXD__UART2_DTE_RTS 0x238 0x498 0x5EC 0x1 0x4
-#define MX8MP_IOMUXC_UART4_RXD__HSIOMIX_PCIE_CLKREQ_B 0x238 0x498 0x5A0 0x2 0x1
+#define MX8MP_IOMUXC_UART4_RXD__PCIE_CLKREQ_B 0x238 0x498 0x5A0 0x2 0x1
#define MX8MP_IOMUXC_UART4_RXD__GPT1_COMPARE1 0x238 0x498 0x000 0x3 0x0
#define MX8MP_IOMUXC_UART4_RXD__I2C6_SCL 0x238 0x498 0x5CC 0x4 0x2
#define MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28 0x238 0x498 0x000 0x5 0x0
-#define MX8MP_IOMUXC_UART4_RXD__TPSMP_HDATA30 0x238 0x498 0x000 0x7 0x0
#define MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x23C 0x49C 0x000 0x0 0x0
#define MX8MP_IOMUXC_UART4_TXD__UART4_DTE_RX 0x23C 0x49C 0x600 0x0 0x9
#define MX8MP_IOMUXC_UART4_TXD__UART2_DCE_RTS 0x23C 0x49C 0x5EC 0x1 0x5
@@ -907,23 +778,20 @@
#define MX8MP_IOMUXC_UART4_TXD__GPT1_CAPTURE1 0x23C 0x49C 0x594 0x3 0x1
#define MX8MP_IOMUXC_UART4_TXD__I2C6_SDA 0x23C 0x49C 0x5D0 0x4 0x2
#define MX8MP_IOMUXC_UART4_TXD__GPIO5_IO29 0x23C 0x49C 0x000 0x5 0x0
-#define MX8MP_IOMUXC_UART4_TXD__TPSMP_HDATA31 0x23C 0x49C 0x000 0x7 0x0
-#define MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_EARC_SCL 0x240 0x4A0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x240 0x4A0 0x000 0x0 0x0
#define MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL 0x240 0x4A0 0x5C4 0x3 0x3
#define MX8MP_IOMUXC_HDMI_DDC_SCL__CAN1_TX 0x240 0x4A0 0x000 0x4 0x0
#define MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26 0x240 0x4A0 0x000 0x5 0x0
-#define MX8MP_IOMUXC_HDMI_DDC_SCL__AUDIOMIX_test_out00 0x240 0x4A0 0x000 0x6 0x0
-#define MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_EARC_SDA 0x244 0x4A4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x244 0x4A4 0x000 0x0 0x0
#define MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA 0x244 0x4A4 0x5C8 0x3 0x3
#define MX8MP_IOMUXC_HDMI_DDC_SDA__CAN1_RX 0x244 0x4A4 0x54C 0x4 0x3
#define MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27 0x244 0x4A4 0x000 0x5 0x0
-#define MX8MP_IOMUXC_HDMI_DDC_SDA__AUDIOMIX_test_out01 0x244 0x4A4 0x000 0x6 0x0
-#define MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_EARC_CEC 0x248 0x4A8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x248 0x4A8 0x000 0x0 0x0
#define MX8MP_IOMUXC_HDMI_CEC__I2C6_SCL 0x248 0x4A8 0x5CC 0x3 0x3
#define MX8MP_IOMUXC_HDMI_CEC__CAN2_TX 0x248 0x4A8 0x000 0x4 0x0
#define MX8MP_IOMUXC_HDMI_CEC__GPIO3_IO28 0x248 0x4A8 0x000 0x5 0x0
-#define MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_EARC_DC_HPD 0x24C 0x4AC 0x000 0x0 0x0
-#define MX8MP_IOMUXC_HDMI_HPD__AUDIOMIX_EARC_HDMI_HPD_O 0x24C 0x4AC 0x000 0x1 0x0
+#define MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x24C 0x4AC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_HPD__AUDIOMIX_HDMI_HPD_O 0x24C 0x4AC 0x000 0x1 0x0
#define MX8MP_IOMUXC_HDMI_HPD__I2C6_SDA 0x24C 0x4AC 0x5D0 0x3 0x3
#define MX8MP_IOMUXC_HDMI_HPD__CAN2_RX 0x24C 0x4AC 0x550 0x4 0x3
#define MX8MP_IOMUXC_HDMI_HPD__GPIO3_IO29 0x24C 0x4AC 0x000 0x5 0x0
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index a5154f1..6038f66 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -713,7 +713,8 @@ fec: ethernet@30be0000 {
reg = <0x30be0000 0x10000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_ENET1_ROOT>,
<&clk IMX8MP_CLK_SIM_ENET_ROOT>,
<&clk IMX8MP_CLK_ENET_TIMER>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index c9241ab..2418cca 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -132,13 +132,15 @@ opp-800M {
};
};
+&dphy {
+ status = "okay";
+};
+
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
phy-handle = <ðphy0>;
- phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <10>;
fsl,magic-packet;
status = "okay";
@@ -149,6 +151,8 @@ mdio {
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
+ reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
};
};
};
@@ -157,7 +161,7 @@ &gpio5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wifi_reset>;
- wl-reg-on {
+ wl-reg-on-hog {
gpio-hog;
gpios = <29 GPIO_ACTIVE_HIGH>;
output-high;
@@ -255,6 +259,40 @@ vgen6_reg: vgen6 {
};
};
+&lcdif {
+ status = "okay";
+};
+
+&mipi_dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ panel@0 {
+ pinctrl-0 = <&pinctrl_mipi_dsi>;
+ pinctrl-names = "default";
+ compatible = "raydium,rm67191";
+ reg = <0>;
+ reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+ dsi-lanes = <4>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mipi_dsi_out>;
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mipi_dsi_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie0>;
@@ -388,6 +426,12 @@ MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x4f
>;
};
+ pinctrl_mipi_dsi: mipidsigrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_ECSPI1_SCLK_GPIO5_IO6 0x16
+ >;
+ };
+
pinctrl_pcie0: pcie0grp {
fsl,pins = <
MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x76
@@ -407,7 +451,7 @@ MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
>;
};
- pinctrl_reg_usdhc2: regusdhc2grpgpio {
+ pinctrl_reg_usdhc2: regusdhc2gpiogrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
index bfd91c1..366693f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
@@ -214,13 +214,13 @@ MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49
>;
};
- pinctrl_usdhc2_gpio: usdhc2grpgpio {
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
>;
};
- pinctrl_usdhc2_vmmc: usdhc2vmmcgpio {
+ pinctrl_usdhc2_vmmc: usdhc2vmmcgpiogrp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x41
>;
@@ -238,7 +238,7 @@ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
>;
};
- pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd
@@ -250,7 +250,7 @@ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
>;
};
- pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xdf
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 6900ac2..af139b2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "dt-bindings/input/input.h"
+#include <dt-bindings/interrupt-controller/irq.h>
#include "dt-bindings/pwm/pwm.h"
#include "dt-bindings/usb/pd.h"
#include "imx8mq.dtsi"
@@ -60,7 +61,7 @@ wwan-wake {
label = "WWAN_WAKE";
gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio3>;
- interrupts = <8 GPIO_ACTIVE_LOW>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
wakeup-source;
linux,code = <KEY_PHONE>;
};
@@ -285,10 +286,10 @@ pmic: pmic@4b {
pinctrl-0 = <&pinctrl_pmic>;
clocks = <&pmic_osc>;
clock-names = "osc";
+ #clock-cells = <0>;
clock-output-names = "pmic_clk";
interrupt-parent = <&gpio1>;
- interrupts = <3 GPIO_ACTIVE_LOW>;
- interrupt-names = "irq";
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
regulators {
@@ -734,7 +735,7 @@ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
>;
};
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd
@@ -751,7 +752,7 @@ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
>;
};
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf
@@ -768,13 +769,13 @@ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
>;
};
- pinctrl_usdhc2_pwr: usdhc2grppwr {
+ pinctrl_usdhc2_pwr: usdhc2pwrgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
>;
};
- pinctrl_usdhc2_gpio: usdhc2grpgpio {
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x80 /* WIFI_WAKE */
>;
@@ -791,7 +792,7 @@ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
>;
};
- pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd
@@ -802,7 +803,7 @@ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd
>;
};
- pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcf
@@ -834,6 +835,39 @@ MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x19 /* WWAN_RESET */
};
};
+&lcdif {
+ status = "okay";
+};
+
+&mipi_dsi {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "rocktech,jh057n00900";
+ reg = <0>;
+ backlight = <&backlight_dsi>;
+ reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+ iovcc-supply = <®_1v8_p>;
+ vcc-supply = <®_2v8_p>;
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mipi_dsi_out>;
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mipi_dsi_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
&pgc_gpu {
power-supply = <&buck3_reg>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
new file mode 100644
index 0000000..d77fc5d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Purism SPC <kernel@puri.sm>
+//
+// Librem 5 Chestnut
+
+/dts-v1/;
+
+#include "imx8mq-librem5.dtsi"
+
+/ {
+ model = "Purism Librem 5r2";
+ compatible = "purism,librem5r2", "purism,librem5", "fsl,imx8mq";
+};
+
+&bq25895 {
+ ti,battery-regulation-voltage = <4192000>; /* uV */
+ ti,charge-current = <1600000>; /* uA */
+ ti,termination-current = <66000>; /* uA */
+};
+
+&accel_gyro {
+ mount-matrix = "1", "0", "0",
+ "0", "-1", "0",
+ "0", "0", "1";
+};
+
+&proximity {
+ proximity-near-level = <220>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
new file mode 100644
index 0000000..6704ea2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Purism SPC <kernel@puri.sm>
+
+/dts-v1/;
+
+#include "imx8mq-librem5.dtsi"
+
+/ {
+ model = "Purism Librem 5r3";
+ compatible = "purism,librem5r3", "purism,librem5", "fsl,imx8mq";
+};
+
+&accel_gyro {
+ mount-matrix = "1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "-1";
+};
+
+&bq25895 {
+ ti,battery-regulation-voltage = <4200000>; /* uV */
+ ti,charge-current = <1500000>; /* uA */
+ ti,termination-current = <144000>; /* uA */
+};
+
+&proximity {
+ proximity-near-level = <25>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
new file mode 100644
index 0000000..e3c6d12
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -0,0 +1,1106 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2020 Purism SPC
+ */
+
+/dts-v1/;
+
+#include "dt-bindings/input/input.h"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "dt-bindings/pwm/pwm.h"
+#include "dt-bindings/usb/pd.h"
+#include "imx8mq.dtsi"
+
+/ {
+ model = "Purism Librem 5";
+ compatible = "purism,librem5", "fsl,imx8mq";
+
+ backlight_dsi: backlight-dsi {
+ compatible = "led-backlight";
+ leds = <&led_backlight>;
+ };
+
+ pmic_osc: clock-pmic {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "pmic_osc";
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_keys>;
+
+ vol-down {
+ label = "VOL_DOWN";
+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ vol-up {
+ label = "VOL_UP";
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ reg_aud_1v8: regulator-audio-1v8 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audiopwr>;
+ regulator-name = "AUDIO_PWR_EN";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_gnss: regulator-gnss {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gnsspwr>;
+ regulator-name = "GNSS";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_hub: regulator-hub {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hub_pwr>;
+ regulator-name = "HUB";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_lcd_3v4: regulator-lcd-3v4 {
+ compatible = "regulator-fixed";
+ regulator-name = "LCD_3V4";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dsibiasen>;
+ vin-supply = <®_vsys_3v4>;
+ gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_vdd_sen: regulator-vdd-sen {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_SEN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_vdd_3v3: regulator-vdd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_vdd_1v8: regulator-vdd-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_vsys_3v4: regulator-vsys-3v4 {
+ compatible = "regulator-fixed";
+ regulator-name = "VSYS_3V4";
+ regulator-min-microvolt = <3400000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-always-on;
+ };
+
+ reg_wifi_3v3: regulator-wifi-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3_WIFI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hp>;
+ simple-audio-card,name = "Librem 5";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets =
+ "Headphone", "Headphones",
+ "Microphone", "Headset Mic",
+ "Microphone", "Digital Mic",
+ "Speaker", "Speaker";
+ simple-audio-card,routing =
+ "Headphones", "HPOUTL",
+ "Headphones", "HPOUTR",
+ "Speaker", "SPKOUTL",
+ "Speaker", "SPKOUTR",
+ "Headset Mic", "MICBIAS",
+ "IN3R", "Headset Mic",
+ "DMICDAT", "Digital Mic";
+ simple-audio-card,hp-det-gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&codec>;
+ clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+ frame-master;
+ bitclock-master;
+ };
+ };
+
+ sound-wwan {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Modem";
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai6>;
+ frame-inversion;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&bm818_codec>;
+ frame-master;
+ bitclock-master;
+ };
+ };
+
+ bm818_codec: sound-wwan-codec {
+ compatible = "broadmobi,bm818", "option,gtm601";
+ #sound-dai-cells = <0>;
+ };
+
+ vibrator {
+ compatible = "pwm-vibrator";
+ pwms = <&pwm1 0 1000000000 0>;
+ pwm-names = "enable";
+ vcc-supply = <®_vdd_3v3>;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+ operating-points-v2 = <&ddrc_opp_table>;
+
+ ddrc_opp_table: ddrc-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-25M {
+ opp-hz = /bits/ 64 <25000000>;
+ };
+
+ opp-100M {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+
+ opp-800M {
+ opp-hz = /bits/ 64 <800000000>;
+ };
+ };
+};
+
+&dphy {
+ status = "okay";
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ nor_flash: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic_5v>;
+
+ pmic-5v {
+ gpio-hog;
+ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ input;
+ };
+};
+
+&iomuxc {
+ pinctrl_audiopwr: audiopwrgrp {
+ fsl,pins = <
+ /* AUDIO_POWER_EN_3V3 */
+ MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x83
+ >;
+ };
+
+ pinctrl_bl: blgrp {
+ fsl,pins = <
+ /* BACKLINGE_EN */
+ MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x83
+ >;
+ };
+
+ pinctrl_charger_in: chargeringrp {
+ fsl,pins = <
+ /* CHRG_INT */
+ MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x00
+ /* CHG_STATUS_B */
+ MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x80
+ >;
+ };
+
+ pinctrl_dsibiasen: dsibiasengrp {
+ fsl,pins = <
+ /* DSI_BIAS_EN */
+ MX8MQ_IOMUXC_ENET_TD1_GPIO1_IO20 0x83
+ >;
+ };
+
+ pinctrl_dsien: dsiengrp {
+ fsl,pins = <
+ /* DSI_EN_3V3 */
+ MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x83
+ >;
+ };
+
+ pinctrl_ecspi1: ecspigrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x83
+ MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x83
+ MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19
+ MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x83
+ >;
+ };
+
+ pinctrl_gauge: gaugegrp {
+ fsl,pins = <
+ /* BAT_LOW */
+ MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x80
+ >;
+ };
+
+ pinctrl_gnsspwr: gnsspwrgrp {
+ fsl,pins = <
+ /* GPS3V3_EN */
+ MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x83
+ >;
+ };
+
+ pinctrl_haptic: hapticgrp {
+ fsl,pins = <
+ /* MOTO */
+ MX8MQ_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x83
+ >;
+ };
+
+ pinctrl_hp: hpgrp {
+ fsl,pins = <
+ /* HEADPHONE_DET_1V8 */
+ MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x180
+ >;
+ };
+
+ pinctrl_hub_pwr: hubpwrgrp {
+ fsl,pins = <
+ /* HUB_PWR_3V3_EN */
+ MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x83
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000026
+ MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000026
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000026
+ MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000026
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000026
+ MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000026
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000026
+ MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000026
+ >;
+ };
+
+ pinctrl_keys: keysgrp {
+ fsl,pins = <
+ /* VOL- */
+ MX8MQ_IOMUXC_ENET_MDIO_GPIO1_IO17 0x01C0
+ /* VOL+ */
+ MX8MQ_IOMUXC_ENET_MDC_GPIO1_IO16 0x01C0
+ >;
+ };
+
+ pinctrl_led_b: ledbgrp {
+ fsl,pins = <
+ /* LED_B */
+ MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT 0x06
+ >;
+ };
+
+ pinctrl_led_g: ledggrp {
+ fsl,pins = <
+ /* LED_G */
+ MX8MQ_IOMUXC_SAI3_MCLK_PWM4_OUT 0x06
+ >;
+ };
+
+ pinctrl_led_r: ledrgrp {
+ fsl,pins = <
+ /* LED_R */
+ MX8MQ_IOMUXC_SPDIF_TX_PWM3_OUT 0x06
+ >;
+ };
+
+ pinctrl_mag: maggrp {
+ fsl,pins = <
+ /* INT_MAG */
+ MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x80
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ /* PMIC_NINT */
+ MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x80
+ >;
+ };
+
+ pinctrl_pmic_5v: pmic5vgrp {
+ fsl,pins = <
+ /* PMIC_5V */
+ MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x80
+ >;
+ };
+
+ pinctrl_prox: proxgrp {
+ fsl,pins = <
+ /* INT_LIGHT */
+ MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x80
+ >;
+ };
+
+ pinctrl_rtc: rtcgrp {
+ fsl,pins = <
+ /* RTC_INT */
+ MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x80
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
+ MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
+ MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6
+ MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6
+ MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
+ >;
+ };
+
+ pinctrl_sai6: sai6grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0 0xd6
+ MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC 0xd6
+ MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK 0xd6
+ MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0 0xd6
+ >;
+ };
+
+ pinctrl_tcpc: tcpcgrp {
+ fsl,pins = <
+ /* TCPC_INT */
+ MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x01C0
+ >;
+ };
+
+ pinctrl_typec: typecgrp {
+ fsl,pins = <
+ /* TYPEC_MUX_EN */
+ MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x83
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
+ MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49
+ MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49
+ MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x49
+ MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x49
+ MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x49
+ MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x49
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
+ MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd
+ MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcf
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcf
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcf
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcf
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcf
+ MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ /* nWDOG */
+ MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x1f
+ >;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <387000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ typec_pd: usb-pd@3f {
+ compatible = "ti,tps6598x";
+ reg = <0x3f>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_typec>, <&pinctrl_tcpc>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "irq";
+
+ connector {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_con_hs: endpoint {
+ remote-endpoint = <&typec_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_con_ss: endpoint {
+ remote-endpoint = <&typec_ss>;
+ };
+ };
+ };
+ };
+ };
+
+ pmic: pmic@4b {
+ compatible = "rohm,bd71837";
+ reg = <0x4b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ clocks = <&pmic_osc>;
+ clock-names = "osc";
+ clock-output-names = "pmic_clk";
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ rohm,reset-snvs-powered;
+
+ regulators {
+ buck1_reg: BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <900000>;
+ rohm,dvs-idle-voltage = <850000>;
+ rohm,dvs-suspend-voltage = <800000>;
+ regulator-always-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <1000000>;
+ rohm,dvs-idle-voltage = <900000>;
+ regulator-always-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "buck3";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ rohm,dvs-run-voltage = <900000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "buck4";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ rohm,dvs-run-voltage = <1000000>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "buck5";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "buck6";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "buck7";
+ regulator-min-microvolt = <1605000>;
+ regulator-max-microvolt = <1995000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "buck8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ };
+
+ ldo1_reg: LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ /* leave on for snvs power button */
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ /* leave on for snvs power button */
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: LDO5 {
+ /* VDD_PHY_0V9 - MIPI and HDMI domains */
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ /* VDD_PHY_0V9 - MIPI, HDMI and USB domains */
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ /* VDD_PHY_3V3 - USB domain */
+ regulator-name = "ldo7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ rtc@68 {
+ compatible = "microcrystal,rv4162";
+ reg = <0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <387000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ magnetometer@1e {
+ compatible = "st,lsm9ds1-magn";
+ reg = <0x1e>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mag>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+ vdd-supply = <®_vdd_sen>;
+ vddio-supply = <®_vdd_1v8>;
+ };
+
+ regulator@3e {
+ compatible = "tps65132";
+ reg = <0x3e>;
+
+ outp {
+ regulator-name = "LCD_AVDD";
+ vin-supply = <®_lcd_3v4>;
+ };
+
+ outn {
+ regulator-name = "LCD_AVEE";
+ vin-supply = <®_lcd_3v4>;
+ };
+ };
+
+ proximity: prox@60 {
+ compatible = "vishay,vcnl4040";
+ reg = <0x60>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_prox>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ accel_gyro: accel-gyro@6a {
+ compatible = "st,lsm9ds1-imu";
+ reg = <0x6a>;
+ vdd-supply = <®_vdd_sen>;
+ vddio-supply = <®_vdd_1v8>;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <387000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ codec: audio-codec@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+ assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+ assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ #sound-dai-cells = <0>;
+ mic-cfg = <0x200>;
+ DCVDD-supply = <®_aud_1v8>;
+ DBVDD-supply = <®_aud_1v8>;
+ AVDD-supply = <®_aud_1v8>;
+ CPVDD-supply = <®_aud_1v8>;
+ MICVDD-supply = <®_aud_1v8>;
+ PLLVDD-supply = <®_aud_1v8>;
+ SPKVDD1-supply = <®_vsys_3v4>;
+ SPKVDD2-supply = <®_vsys_3v4>;
+ gpio-cfg = <
+ 0x0000 /* n/c */
+ 0x0001 /* gpio2, 1: default */
+ 0x0013 /* gpio3, 2: dmicclk */
+ 0x0000 /* n/c, 3: default */
+ 0x8014 /* gpio5, 4: dmic_dat */
+ 0x0000 /* gpio6, 5: default */
+ >;
+ };
+
+ backlight@36 {
+ compatible = "ti,lm36922";
+ reg = <0x36>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_bl>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+ vled-supply = <®_vsys_3v4>;
+ ti,ovp-microvolt = <25000000>;
+
+ led_backlight: led@0 {
+ reg = <0>;
+ label = ":backlight";
+ linux,default-trigger = "backlight";
+ led-max-microamp = <20000>;
+ };
+ };
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5506";
+ reg = <0x38>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1440>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <387000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ bat: fuel-gauge@36 {
+ compatible = "maxim,max17055";
+ reg = <0x36>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gauge>;
+ maxim,over-heat-temp = <700>;
+ maxim,over-volt = <4500>;
+ maxim,rsns-microohm = <5000>;
+ };
+
+ bq25895: charger@6a {
+ compatible = "ti,bq25895", "ti,bq25890";
+ reg = <0x6a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_charger_in>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ phys = <&usb3_phy0>;
+ ti,precharge-current = <130000>; /* uA */
+ ti,minimum-sys-voltage = <3700000>; /* uV */
+ ti,boost-voltage = <5000000>; /* uV */
+ ti,boost-max-current = <500000>; /* uA */
+ ti,use-vinmin-threshold = <1>; /* enable VINDPM */
+ ti,vinmin-threshold = <3900000>; /* uV */
+ monitored-battery = <&bat>;
+ };
+};
+
+&pgc_gpu {
+ power-supply = <&buck3_reg>;
+};
+
+&pgc_mipi {
+ power-supply = <&ldo5_reg>;
+};
+
+&pgc_vpu {
+ power-supply = <&buck4_reg>;
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_haptic>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led_b>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led_g>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led_r>;
+ status = "okay";
+};
+
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+ assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
+ assigned-clock-rates = <786432000>, <722534400>;
+ status = "okay";
+};
+
+&sai6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai6>;
+ assigned-clocks = <&clk IMX8MQ_CLK_SAI6>;
+ assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ fsl,sai-synchronous-rx;
+ status = "okay";
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+&snvs_rtc {
+ status = "disabled";
+};
+
+&uart1 { /* console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 { /* TPS - GPS - DEBUG */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+
+ gnss {
+ compatible = "globaltop,pa6h";
+ vcc-supply = <®_gnss>;
+ current-speed = <9600>;
+ };
+};
+
+&uart3 { /* SMC */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&uart4 { /* BT */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usb3_phy0 {
+ status = "okay";
+};
+
+&usb3_phy1 {
+ vbus-supply = <®_hub>;
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dr_mode = "otg";
+ snps,dis_u3_susphy_quirk;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ typec_hs: endpoint {
+ remote-endpoint = <&usb_con_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ typec_ss: endpoint {
+ remote-endpoint = <&usb_con_ss>;
+ };
+ };
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Microchip USB2642 */
+ hub@1 {
+ compatible = "usb424,2640";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mass-storage@1 {
+ compatible = "usb424,4041";
+ reg = <1>;
+ };
+ };
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <8>;
+ vmmc-supply = <®_vdd_3v3>;
+ power-supply = <®_vdd_1v8>;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ bus-width = <4>;
+ vmmc-supply = <®_wifi_3v3>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ wakeup-source;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
index 77ab568..a3b9d61 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "imx8mq.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Google i.MX8MQ Phanbell";
@@ -125,7 +126,7 @@ pmic: pmic@4b {
clocks = <&pmic_osc>;
clock-output-names = "pmic_clk";
interrupt-parent = <&gpio1>;
- interrupts = <3 GPIO_ACTIVE_LOW>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
regulators {
buck1: BUCK1 {
@@ -262,9 +263,6 @@ &fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
- phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <10>;
- phy-reset-post-delay = <50>;
phy-handle = <ðphy0>;
fsl,magic-packet;
status = "okay";
@@ -275,6 +273,9 @@ mdio {
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
+ reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <50000>;
};
};
};
@@ -365,7 +366,7 @@ MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
>;
};
- pinctrl_pmic: pmicirq {
+ pinctrl_pmic: pmicirqgrp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
>;
@@ -395,7 +396,7 @@ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
>;
};
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5
@@ -412,7 +413,7 @@ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
>;
};
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7
@@ -429,7 +430,7 @@ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
>;
};
- pinctrl_usdhc2_gpio: usdhc2grpgpio {
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
@@ -448,7 +449,7 @@ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
>;
};
- pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5
@@ -460,7 +461,7 @@ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
>;
};
- pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts
index 59da96b..89cbec5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts
@@ -9,6 +9,7 @@
/dts-v1/;
#include "imx8mq.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "TechNexion PICO-PI-8M";
@@ -70,7 +71,7 @@ pmic: pmic@4b {
clock-names = "osc";
clock-output-names = "pmic_clk";
interrupt-parent = <&gpio1>;
- interrupts = <3 GPIO_ACTIVE_LOW>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "irq";
regulators {
@@ -297,7 +298,7 @@ MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x19 /* USB OTG VBUS Enable */
>;
};
- pinctrl_pmic: pmicirq {
+ pinctrl_pmic: pmicirqgrp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
>;
@@ -335,7 +336,7 @@ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83
>;
};
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5
@@ -351,7 +352,7 @@ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x85
>;
};
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7
@@ -367,7 +368,7 @@ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x87
>;
};
- pinctrl_usdhc2_gpio: usdhc2grpgpio {
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
>;
@@ -385,7 +386,7 @@ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
>;
};
- pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5
@@ -397,7 +398,7 @@ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
>;
};
- pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
index 602c870..0187890 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
@@ -20,8 +20,6 @@ &fec1 {
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
phy-handle = <ðphy0>;
- phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <2>;
fsl,magic-packet;
status = "okay";
@@ -32,6 +30,8 @@ mdio {
ethphy0: ethernet-phy@4 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <4>;
+ reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <2000>;
};
};
};
@@ -275,7 +275,7 @@ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
>;
};
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd
@@ -292,7 +292,7 @@ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
>;
};
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
index b4795a0..5d5aa65 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
@@ -122,7 +122,6 @@ &fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
- phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
phy-handle = <ðphy>;
fsl,magic-packet;
status = "okay";
@@ -134,6 +133,7 @@ mdio {
ethphy: ethernet-phy@3 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <3>;
+ reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
index 6b35813..bfad4b8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
@@ -15,7 +15,7 @@ / {
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index 0d1088d..fa7a041 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -229,28 +229,28 @@ &gpio3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio3_hog>;
- usb-emulation {
+ usb-emulation-hog {
gpio-hog;
gpios = <10 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "usb-emulation";
};
- usb-mode1 {
+ usb-mode1-hog {
gpio-hog;
gpios = <11 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "usb-mode1";
};
- usb-pwr {
+ usb-pwr-hog {
gpio-hog;
gpios = <12 GPIO_ACTIVE_LOW>;
output-high;
line-name = "usb-pwr-ctrl-en-n";
};
- usb-mode2 {
+ usb-mode2-hog {
gpio-hog;
gpios = <13 GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 561fa79..5e0e7d0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -523,6 +523,12 @@ lcdif: lcd-controller@30320000 {
<&clk IMX8MQ_VIDEO_PLL1_OUT>;
assigned-clock-rates = <0>, <0>, <0>, <594000000>;
status = "disabled";
+
+ port@0 {
+ lcdif_mipi_dsi: endpoint {
+ remote-endpoint = <&mipi_dsi_lcdif_in>;
+ };
+ };
};
iomuxc: pinctrl@30330000 {
@@ -617,6 +623,7 @@ src: reset-controller@30390000 {
gpc: gpc@303a0000 {
compatible = "fsl,imx8mq-gpc";
reg = <0x303a0000 0x10000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <3>;
@@ -899,6 +906,49 @@ sec_jr2: jr@3000 {
};
};
+ mipi_dsi: mipi-dsi@30a00000 {
+ compatible = "fsl,imx8mq-nwl-dsi";
+ reg = <0x30a00000 0x300>;
+ clocks = <&clk IMX8MQ_CLK_DSI_CORE>,
+ <&clk IMX8MQ_CLK_DSI_AHB>,
+ <&clk IMX8MQ_CLK_DSI_IPG_DIV>,
+ <&clk IMX8MQ_CLK_DSI_PHY_REF>,
+ <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
+ clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif";
+ assigned-clocks = <&clk IMX8MQ_CLK_DSI_AHB>,
+ <&clk IMX8MQ_CLK_DSI_CORE>,
+ <&clk IMX8MQ_CLK_DSI_IPG_DIV>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>,
+ <&clk IMX8MQ_SYS1_PLL_266M>;
+ assigned-clock-rates = <80000000>, <266000000>, <20000000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ mux-controls = <&mux 0>;
+ power-domains = <&pgc_mipi>;
+ phys = <&dphy>;
+ phy-names = "dphy";
+ resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>,
+ <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>,
+ <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>,
+ <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>;
+ reset-names = "byte", "dpi", "esc", "pclk";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mipi_dsi_lcdif_in: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&lcdif_mipi_dsi>;
+ };
+ };
+ };
+ };
+
dphy: dphy@30a00300 {
compatible = "fsl,imx8mq-mipi-dphy";
reg = <0x30a00300 0x100>;
@@ -1031,7 +1081,8 @@ fec1: ethernet@30be0000 {
reg = <0x30be0000 0x10000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_ENET1_ROOT>,
<&clk IMX8MQ_CLK_ENET1_ROOT>,
<&clk IMX8MQ_CLK_ENET_TIMER>,
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
index 75f17a2..f38acff 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
@@ -494,7 +494,7 @@ IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21
>;
};
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
fsl,pins = <
IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21
@@ -511,7 +511,7 @@ IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21
>;
};
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
fsl,pins = <
IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21
@@ -554,7 +554,7 @@ IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21
>;
};
- pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */
IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */
@@ -566,7 +566,7 @@ IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21
>;
};
- pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */
IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index c1b614d..963300e 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -530,7 +530,7 @@ &i2c1 {
rt1711h: rt1711h@4e {
compatible = "richtek,rt1711h";
reg = <0x4e>;
- status = "ok";
+ status = "okay";
interrupt-parent = <&gpio27>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
@@ -570,7 +570,7 @@ rt1711h_ep: endpoint@0 {
};
adv7533: adv7533@39 {
- status = "ok";
+ status = "okay";
compatible = "adi,adv7533";
reg = <0x39>;
adi,dsi-lanes = <4>;
@@ -656,7 +656,7 @@ &sdio_clk_cfg_func
&sdio_cfg_func>;
/* WL_EN */
vmmc-supply = <&wlan_en>;
- status = "ok";
+ status = "okay";
wlcore: wlcore@2 {
compatible = "ti,wl1837";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index d25aac5..994140f 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1089,16 +1089,18 @@ watchdog0: watchdog@e8a06000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xe8a06000 0x0 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&crg_ctrl HI3660_OSC32K>;
- clock-names = "apb_pclk";
+ clocks = <&crg_ctrl HI3660_OSC32K>,
+ <&crg_ctrl HI3660_OSC32K>;
+ clock-names = "wdog_clk", "apb_pclk";
};
watchdog1: watchdog@e8a07000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xe8a07000 0x0 0x1000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&crg_ctrl HI3660_OSC32K>;
- clock-names = "apb_pclk";
+ clocks = <&crg_ctrl HI3660_OSC32K>,
+ <&crg_ctrl HI3660_OSC32K>;
+ clock-names = "wdog_clk", "apb_pclk";
};
tsensor: tsensor@fff30000 {
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
index 7dac33d..7f9f988 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -418,7 +418,7 @@ &sdio_clk_cfg_func
&sdio_cfg_func>;
/* WL_EN */
vmmc-supply = <&wlan_en>;
- status = "ok";
+ status = "okay";
wlcore: wlcore@2 {
compatible = "ti,wl1837";
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 533ed52..91d0867 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -267,7 +267,7 @@ sound_card {
&uart1 {
assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>;
assigned-clock-rates = <150000000>;
- status = "ok";
+ status = "okay";
bluetooth {
compatible = "ti,wl1835-st";
@@ -278,21 +278,21 @@ bluetooth {
};
&uart2 {
- status = "ok";
+ status = "okay";
label = "LS-UART0";
};
&uart3 {
- status = "ok";
+ status = "okay";
label = "LS-UART1";
};
&ade {
- status = "ok";
+ status = "okay";
};
&dsi {
- status = "ok";
+ status = "okay";
ports {
/* 1 for output port */
@@ -489,17 +489,17 @@ &gpio15 {
&i2c0 {
- status = "ok";
+ status = "okay";
};
&i2c1 {
- status = "ok";
+ status = "okay";
};
&i2c2 {
#address-cells = <1>;
#size-cells = <0>;
- status = "ok";
+ status = "okay";
adv7533: adv7533@39 {
compatible = "adi,adv7533";
@@ -541,5 +541,5 @@ i2s0_cpu_endpoint: endpoint {
};
&spi0 {
- status = "ok";
+ status = "okay";
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 3d189d9..014735a 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -371,7 +371,7 @@ dma0: dma@f7370000 {
clocks = <&sys_ctrl HI6220_EDMAC_ACLK>;
dma-no-cci;
dma-type = "hi6220_dma";
- status = "ok";
+ status = "okay";
};
dual_timer0: timer@f8008000 {
@@ -843,8 +843,9 @@ watchdog0: watchdog@f8005000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xf8005000 0x0 0x1000>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ao_ctrl HI6220_WDT0_PCLK>;
- clock-names = "apb_pclk";
+ clocks = <&ao_ctrl HI6220_WDT0_PCLK>,
+ <&ao_ctrl HI6220_WDT0_PCLK>;
+ clock-names = "wdog_clk", "apb_pclk";
};
tsensor: tsensor@0,f7030700 {
diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
index e93c65e..369b69b 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
@@ -42,15 +42,15 @@ pwrbutton {
};
&uart0 {
- status = "ok";
+ status = "okay";
};
&peri_gpio0 {
- status = "ok";
+ status = "okay";
};
&lbc {
- status = "ok";
+ status = "okay";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x0 0x90000000 0x08000000>,
diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
index 677862b..9f4a930 100644
--- a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
@@ -22,37 +22,37 @@ memory@0 {
};
&ipmi0 {
- status = "ok";
+ status = "okay";
};
&uart0 {
- status = "ok";
+ status = "okay";
};
ð0 {
- status = "ok";
+ status = "okay";
};
ð1 {
- status = "ok";
+ status = "okay";
};
ð2 {
- status = "ok";
+ status = "okay";
};
ð3 {
- status = "ok";
+ status = "okay";
};
&sas1 {
- status = "ok";
+ status = "okay";
};
&usb_ohci {
- status = "ok";
+ status = "okay";
};
&usb_ehci {
- status = "ok";
+ status = "okay";
};
diff --git a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
index fcbdffe..81a2312 100644
--- a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
@@ -50,41 +50,41 @@ chosen {
};
&uart0 {
- status = "ok";
+ status = "okay";
};
&ipmi0 {
- status = "ok";
+ status = "okay";
};
&usb_ohci {
- status = "ok";
+ status = "okay";
};
&usb_ehci {
- status = "ok";
+ status = "okay";
};
ð0 {
- status = "ok";
+ status = "okay";
};
ð1 {
- status = "ok";
+ status = "okay";
};
ð2 {
- status = "ok";
+ status = "okay";
};
ð3 {
- status = "ok";
+ status = "okay";
};
&sas1 {
- status = "ok";
+ status = "okay";
};
&p0_pcie2_a {
- status = "ok";
+ status = "okay";
};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index 9d7f19e..e1c0fcb 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -20,7 +20,7 @@ reserved-memory {
service_reserved: svcbuffer@0 {
compatible = "shared-dma-pool";
- reg = <0x0 0x0 0x0 0x1000000>;
+ reg = <0x0 0x0 0x0 0x2000000>;
alignment = <0x1000>;
no-map;
};
@@ -149,8 +149,8 @@ gmac0: ethernet@ff800000 {
snps,multicast-filter-bins = <256>;
iommus = <&smmu 1>;
altr,sysmgr-syscon = <&sysmgr 0x44 0>;
- clocks = <&clkmgr AGILEX_EMAC0_CLK>;
- clock-names = "stmmaceth";
+ clocks = <&clkmgr AGILEX_EMAC0_CLK>, <&clkmgr AGILEX_EMAC_PTP_CLK>;
+ clock-names = "stmmaceth", "ptp_ref";
status = "disabled";
};
@@ -167,8 +167,8 @@ gmac1: ethernet@ff802000 {
snps,multicast-filter-bins = <256>;
iommus = <&smmu 2>;
altr,sysmgr-syscon = <&sysmgr 0x48 8>;
- clocks = <&clkmgr AGILEX_EMAC1_CLK>;
- clock-names = "stmmaceth";
+ clocks = <&clkmgr AGILEX_EMAC1_CLK>, <&clkmgr AGILEX_EMAC_PTP_CLK>;
+ clock-names = "stmmaceth", "ptp_ref";
status = "disabled";
};
@@ -185,8 +185,8 @@ gmac2: ethernet@ff804000 {
snps,multicast-filter-bins = <256>;
iommus = <&smmu 3>;
altr,sysmgr-syscon = <&sysmgr 0x4c 16>;
- clocks = <&clkmgr AGILEX_EMAC2_CLK>;
- clock-names = "stmmaceth";
+ clocks = <&clkmgr AGILEX_EMAC2_CLK>, <&clkmgr AGILEX_EMAC_PTP_CLK>;
+ clock-names = "stmmaceth", "ptp_ref";
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi
index 64f3b13..081fe7a 100644
--- a/arch/arm64/boot/dts/lg/lg1312.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -131,18 +131,18 @@ amba {
ranges;
timers: timer@fd100000 {
- compatible = "arm,sp804";
+ compatible = "arm,sp804", "arm,primecell";
reg = <0x0 0xfd100000 0x1000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
+ clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
+ clock-names = "timer0clk", "timer1clk", "apb_pclk";
};
wdog: watchdog@fd200000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xfd200000 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
+ clocks = <&clk_bus>, <&clk_bus>;
+ clock-names = "wdog_clk", "apb_pclk";
};
uart0: serial@fe000000 {
compatible = "arm,pl011", "arm,primecell";
diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi
index ac23592..604bb69 100644
--- a/arch/arm64/boot/dts/lg/lg1313.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1313.dtsi
@@ -131,18 +131,18 @@ amba {
ranges;
timers: timer@fd100000 {
- compatible = "arm,sp804";
+ compatible = "arm,sp804", "arm,primecell";
reg = <0x0 0xfd100000 0x1000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
+ clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
+ clock-names = "timer0clk", "timer1clk", "apb_pclk";
};
wdog: watchdog@fd200000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xfd200000 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
+ clocks = <&clk_bus>, <&clk_bus>;
+ clock-names = "wdog_clk", "apb_pclk";
};
uart0: serial@fe000000 {
compatible = "arm,pl011", "arm,primecell";
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index a5a12b2..44a0346 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/regulator/dlg,da9211-regulator.h>
#include <dt-bindings/gpio/gpio.h>
#include "mt8173.dtsi"
@@ -294,7 +295,8 @@ da9211_vcpu_reg: BUCKA {
regulator-max-microamp = <4400000>;
regulator-ramp-delay = <10000>;
regulator-always-on;
- regulator-allowed-modes = <0 1>;
+ regulator-allowed-modes = <DA9211_BUCK_MODE_SYNC
+ DA9211_BUCK_MODE_AUTO>;
};
da9211_vgpu_reg: BUCKB {
@@ -431,12 +433,11 @@ &nor_flash {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&nor_gpio1_pins>;
- bus-width = <8>;
- max-frequency = <50000000>;
- non-removable;
+
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
+ spi-max-frequency = <50000000>;
};
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index ae405bd..cba2d89 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -25,6 +25,17 @@ memory@40000000 {
chosen {
stdout-path = "serial0:921600n8";
};
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ scp_mem_reserved: scp_mem_region {
+ compatible = "shared-dma-pool";
+ reg = <0 0x50000000 0 0x2900000>;
+ no-map;
+ };
+ };
};
&auxadc {
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index f0a0705..85f7c33 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -90,6 +90,18 @@ pp3300_alw: regulator6 {
regulator-max-microvolt = <3300000>;
};
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ scp_mem_reserved: scp_mem_region {
+ compatible = "shared-dma-pool";
+ reg = <0 0x50000000 0 0x2900000>;
+ no-map;
+ };
+ };
+
max98357a: codec0 {
compatible = "maxim,max98357a";
sdmode-gpios = <&pio 175 0>;
@@ -524,6 +536,13 @@ pins_clk {
};
};
+ scp_pins: scp {
+ pins_scp_uart {
+ pinmux = <PINMUX_GPIO110__FUNC_TP_URXD1_AO>,
+ <PINMUX_GPIO112__FUNC_TP_UTXD1_AO>;
+ };
+ };
+
spi0_pins: spi0 {
pins_spi{
pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
@@ -651,6 +670,17 @@ pins_wifi_wakeup {
};
};
+&scp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&scp_pins>;
+
+ cros_ec {
+ compatible = "google,cros-ec-rpmsg";
+ mtk,rpmsg-name = "cros-ec-rpmsg";
+ };
+};
+
&soc_data {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 1021058..9cfd961 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -317,8 +317,7 @@ pio: pinctrl@10005000 {
};
watchdog: watchdog@10007000 {
- compatible = "mediatek,mt8183-wdt",
- "mediatek,mt6589-wdt";
+ compatible = "mediatek,mt8183-wdt";
reg = <0 0x10007000 0 0x100>;
#reset-cells = <1>;
};
@@ -339,6 +338,18 @@ pwrap: pwrap@1000d000 {
clock-names = "spi", "wrap";
};
+ scp: scp@10500000 {
+ compatible = "mediatek,mt8183-scp";
+ reg = <0 0x10500000 0 0x80000>,
+ <0 0x105c0000 0 0x19080>;
+ reg-names = "sram", "cfg";
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&infracfg CLK_INFRA_SCPSYS>;
+ clock-names = "main";
+ memory-region = <&scp_mem_reserved>;
+ status = "disabled";
+ };
+
systimer: timer@10017000 {
compatible = "mediatek,mt8183-timer",
"mediatek,mt6765-timer";
diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index dfceffe..29d8cf6 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -56,7 +56,7 @@ &i2c0 {
tca6416: gpio@20 {
compatible = "ti,tca6416";
reg = <0x20>;
- rst-gpio = <&pio 65 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio 65 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&tca6416_pins>;
diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
index cf712e8..3cb01c3 100644
--- a/arch/arm64/boot/dts/microchip/sparx5.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/microchip,sparx5.h>
/ {
compatible = "microchip,sparx5";
@@ -13,6 +14,7 @@ / {
#size-cells = <1>;
aliases {
+ spi0 = &spi0;
serial0 = &uart0;
serial1 = &uart1;
};
@@ -117,6 +119,22 @@ gic: interrupt-controller@600300000 {
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
+ cpu_ctrl: syscon@600000000 {
+ compatible = "microchip,sparx5-cpu-syscon", "syscon",
+ "simple-mfd";
+ reg = <0x6 0x00000000 0xd0>;
+ mux: mux-controller {
+ compatible = "mmio-mux";
+ #mux-control-cells = <0>;
+ /*
+ * SI_OWNER and SI2_OWNER in GENERAL_CTRL
+ * SPI: value 9 - (SIMC,SIBM) = 0b1001
+ * SPI2: value 6 - (SIBM,SIMC) = 0b0110
+ */
+ mux-reg-masks = <0x88 0xf0>;
+ };
+ };
+
uart0: serial@600100000 {
pinctrl-0 = <&uart_pins>;
pinctrl-names = "default";
@@ -143,6 +161,19 @@ uart1: serial@600102000 {
status = "disabled";
};
+ spi0: spi@600104000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "microchip,sparx5-spi";
+ reg = <0x6 0x00104000 0x40>;
+ num-cs = <16>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ clocks = <&ahb_clk>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
timer1: timer@600105000 {
compatible = "snps,dw-apb-timer";
reg = <0x6 0x00105000 0x1000>;
@@ -151,6 +182,20 @@ timer1: timer@600105000 {
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
};
+ sdhci0: mmc@600800000 {
+ compatible = "microchip,dw-sparx5-sdhci";
+ status = "disabled";
+ reg = <0x6 0x00800000 0x1000>;
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-names = "default";
+ clocks = <&clks CLK_ID_AUX1>;
+ clock-names = "core";
+ assigned-clocks = <&clks CLK_ID_AUX1>;
+ assigned-clock-rates = <800000000>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ bus-width = <8>;
+ };
+
gpio: pinctrl@6110101e0 {
compatible = "microchip,sparx5-pinctrl";
reg = <0x6 0x110101e0 0x90>, <0x6 0x10508010 0x100>;
@@ -161,6 +206,26 @@ gpio: pinctrl@6110101e0 {
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
+ cs1_pins: cs1-pins {
+ pins = "GPIO_16";
+ function = "si";
+ };
+
+ cs2_pins: cs2-pins {
+ pins = "GPIO_17";
+ function = "si";
+ };
+
+ cs3_pins: cs3-pins {
+ pins = "GPIO_18";
+ function = "si";
+ };
+
+ si2_pins: si2-pins {
+ pins = "GPIO_39", "GPIO_40", "GPIO_41";
+ function = "si2";
+ };
+
uart_pins: uart-pins {
pins = "GPIO_10", "GPIO_11";
function = "uart";
@@ -180,6 +245,15 @@ i2c2_pins: i2c2-pins {
pins = "GPIO_28", "GPIO_29";
function = "twi2";
};
+
+ emmc_pins: emmc-pins {
+ pins = "GPIO_34", "GPIO_35", "GPIO_36",
+ "GPIO_37", "GPIO_38", "GPIO_39",
+ "GPIO_40", "GPIO_41", "GPIO_42",
+ "GPIO_43", "GPIO_44", "GPIO_45",
+ "GPIO_46", "GPIO_47";
+ function = "emmc";
+ };
};
i2c0: i2c@600101000 {
@@ -209,5 +283,12 @@ i2c1: i2c@600103000 {
clock-frequency = <100000>;
clocks = <&ahb_clk>;
};
+
+ tmon0: tmon@610508110 {
+ compatible = "microchip,sparx5-temp";
+ reg = <0x6 0x10508110 0xc>;
+ #thermal-sensor-cells = <0>;
+ clocks = <&ahb_clk>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_nand.dtsi b/arch/arm64/boot/dts/microchip/sparx5_nand.dtsi
new file mode 100644
index 0000000..03f107e
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_nand.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+&gpio {
+ cs14_pins: cs14-pins {
+ pins = "GPIO_44";
+ function = "si";
+ };
+};
+
+&spi0 {
+ pinctrl-0 = <&si2_pins>;
+ pinctrl-names = "default";
+ spi@e {
+ compatible = "spi-mux";
+ mux-controls = <&mux>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <14>; /* CS14 */
+ spi-flash@6 {
+ compatible = "spi-nand";
+ pinctrl-0 = <&cs14_pins>;
+ pinctrl-names = "default";
+ reg = <0x6>; /* SPI2 */
+ spi-max-frequency = <42000000>;
+ rx-sample-delay-ns = <7>; /* Tune for speed */
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
index 91ee5b6..6b2da7c 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
@@ -16,6 +16,59 @@ memory@0 {
};
};
+&gpio {
+ emmc_pins: emmc-pins {
+ /* NB: No "GPIO_35", "GPIO_36", "GPIO_37"
+ * (N/A: CARD_nDETECT, CARD_WP, CARD_LED)
+ */
+ pins = "GPIO_34", "GPIO_38", "GPIO_39",
+ "GPIO_40", "GPIO_41", "GPIO_42",
+ "GPIO_43", "GPIO_44", "GPIO_45",
+ "GPIO_46", "GPIO_47";
+ drive-strength = <3>;
+ function = "emmc";
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ pinctrl-0 = <&emmc_pins>;
+ max-frequency = <8000000>;
+ microchip,clock-delay = <10>;
+};
+
+&spi0 {
+ status = "okay";
+ spi@0 {
+ compatible = "spi-mux";
+ mux-controls = <&mux>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>; /* CS0 */
+ spi-flash@9 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <8000000>;
+ reg = <0x9>; /* SPI */
+ };
+ };
+ spi@1 {
+ compatible = "spi-mux";
+ mux-controls = <&mux 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>; /* CS1 */
+ spi-flash@9 {
+ compatible = "spi-nand";
+ pinctrl-0 = <&cs1_pins>;
+ pinctrl-names = "default";
+ spi-max-frequency = <8000000>;
+ reg = <0x9>; /* SPI */
+ };
+ };
+};
+
&i2c1 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts
index feee4e9..45ca1af 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts
@@ -5,6 +5,7 @@
/dts-v1/;
#include "sparx5_pcb134_board.dtsi"
+#include "sparx5_nand.dtsi"
/ {
model = "Sparx5 PCB134 Reference Board (NAND)";
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
index 18a535a..f37b478 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -38,6 +38,38 @@ gpio-restart {
};
};
+&spi0 {
+ status = "okay";
+ spi@0 {
+ compatible = "spi-mux";
+ mux-controls = <&mux>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>; /* CS0 */
+ spi-flash@9 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <8000000>;
+ reg = <0x9>; /* SPI */
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+ spi@0 {
+ compatible = "spi-mux";
+ mux-controls = <&mux>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>; /* CS0 */
+ spi-flash@9 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <8000000>;
+ reg = <0x9>; /* SPI */
+ };
+ };
+};
+
&gpio {
i2cmux_pins_i: i2cmux-pins-i {
pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19",
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts
index 10081a6..bbb9852 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts
@@ -15,3 +15,26 @@ memory@0 {
reg = <0x00000000 0x00000000 0x10000000>;
};
};
+
+&gpio {
+ emmc_pins: emmc-pins {
+ /* NB: No "GPIO_35", "GPIO_36", "GPIO_37"
+ * (N/A: CARD_nDETECT, CARD_WP, CARD_LED)
+ */
+ pins = "GPIO_34", "GPIO_38", "GPIO_39",
+ "GPIO_40", "GPIO_41", "GPIO_42",
+ "GPIO_43", "GPIO_44", "GPIO_45",
+ "GPIO_46", "GPIO_47";
+ drive-strength = <3>;
+ function = "emmc";
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>;
+ non-removable;
+ max-frequency = <52000000>;
+ bus-width = <8>;
+ microchip,clock-delay = <10>;
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts
index 20e409a..647cdb3 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts
@@ -5,6 +5,7 @@
/dts-v1/;
#include "sparx5_pcb135_board.dtsi"
+#include "sparx5_nand.dtsi"
/ {
model = "Sparx5 PCB135 Reference Board (NAND)";
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
index d71f11a..b02b8c8 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
@@ -51,6 +51,38 @@ i2cmux_s32: i2cmux-3 {
};
};
+&spi0 {
+ status = "okay";
+ spi@0 {
+ compatible = "spi-mux";
+ mux-controls = <&mux>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>; /* CS0 */
+ spi-flash@9 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <8000000>;
+ reg = <0x9>; /* SPI */
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+ spi@0 {
+ compatible = "spi-mux";
+ mux-controls = <&mux>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>; /* CS0 */
+ spi-flash@9 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <8000000>;
+ reg = <0x9>; /* SPI */
+ };
+ };
+};
+
&axi {
i2c0_imux: i2c0-imux@0 {
compatible = "i2c-mux-pinctrl";
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts
index 741f0e1..f82266f 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts
@@ -15,3 +15,26 @@ memory@0 {
reg = <0x00000000 0x00000000 0x10000000>;
};
};
+
+&gpio {
+ emmc_pins: emmc-pins {
+ /* NB: No "GPIO_35", "GPIO_36", "GPIO_37"
+ * (N/A: CARD_nDETECT, CARD_WP, CARD_LED)
+ */
+ pins = "GPIO_34", "GPIO_38", "GPIO_39",
+ "GPIO_40", "GPIO_41", "GPIO_42",
+ "GPIO_43", "GPIO_44", "GPIO_45",
+ "GPIO_46", "GPIO_47";
+ drive-strength = <3>;
+ function = "emmc";
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>;
+ non-removable;
+ max-frequency = <52000000>;
+ bus-width = <8>;
+ microchip,clock-delay = <10>;
+};
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
index 2273fc5..9296d12 100644
--- a/arch/arm64/boot/dts/nvidia/Makefile
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -9,3 +9,4 @@
dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-sim-vdk.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index 802b8c5..381a84912 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -222,6 +222,7 @@ eeprom@57 {
compatible = "atmel,24c02";
reg = <0x57>;
+ label = "system";
vcc-supply = <&vdd_1v8>;
address-width = <8>;
pagesize = <8>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index 53d92fd..fd91774 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -173,6 +173,7 @@ eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
+ label = "module";
vcc-supply = <&vdd_1v8>;
address-width = <8>;
pagesize = <8>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 8eb61dd..0c46ab7 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -85,7 +85,7 @@ aconnect {
ranges = <0x02900000 0x0 0x02900000 0x200000>;
status = "disabled";
- dma-controller@2930000 {
+ adma: dma-controller@2930000 {
compatible = "nvidia,tegra186-adma";
reg = <0x02930000 0x20000>;
interrupt-parent = <&agic>;
@@ -140,6 +140,221 @@ agic: interrupt-controller@2a40000 {
clock-names = "clk";
status = "disabled";
};
+
+ tegra_ahub: ahub@2900800 {
+ compatible = "nvidia,tegra186-ahub";
+ reg = <0x02900800 0x800>;
+ clocks = <&bpmp TEGRA186_CLK_AHUB>;
+ clock-names = "ahub";
+ assigned-clocks = <&bpmp TEGRA186_CLK_AHUB>;
+ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x02900800 0x02900800 0x11800>;
+ status = "disabled";
+
+ tegra_admaif: admaif@290f000 {
+ compatible = "nvidia,tegra186-admaif";
+ reg = <0x0290f000 0x1000>;
+ dmas = <&adma 1>, <&adma 1>,
+ <&adma 2>, <&adma 2>,
+ <&adma 3>, <&adma 3>,
+ <&adma 4>, <&adma 4>,
+ <&adma 5>, <&adma 5>,
+ <&adma 6>, <&adma 6>,
+ <&adma 7>, <&adma 7>,
+ <&adma 8>, <&adma 8>,
+ <&adma 9>, <&adma 9>,
+ <&adma 10>, <&adma 10>,
+ <&adma 11>, <&adma 11>,
+ <&adma 12>, <&adma 12>,
+ <&adma 13>, <&adma 13>,
+ <&adma 14>, <&adma 14>,
+ <&adma 15>, <&adma 15>,
+ <&adma 16>, <&adma 16>,
+ <&adma 17>, <&adma 17>,
+ <&adma 18>, <&adma 18>,
+ <&adma 19>, <&adma 19>,
+ <&adma 20>, <&adma 20>;
+ dma-names = "rx1", "tx1",
+ "rx2", "tx2",
+ "rx3", "tx3",
+ "rx4", "tx4",
+ "rx5", "tx5",
+ "rx6", "tx6",
+ "rx7", "tx7",
+ "rx8", "tx8",
+ "rx9", "tx9",
+ "rx10", "tx10",
+ "rx11", "tx11",
+ "rx12", "tx12",
+ "rx13", "tx13",
+ "rx14", "tx14",
+ "rx15", "tx15",
+ "rx16", "tx16",
+ "rx17", "tx17",
+ "rx18", "tx18",
+ "rx19", "tx19",
+ "rx20", "tx20";
+ status = "disabled";
+ };
+
+ tegra_i2s1: i2s@2901000 {
+ compatible = "nvidia,tegra186-i2s",
+ "nvidia,tegra210-i2s";
+ reg = <0x2901000 0x100>;
+ clocks = <&bpmp TEGRA186_CLK_I2S1>,
+ <&bpmp TEGRA186_CLK_I2S1_SYNC_INPUT>;
+ clock-names = "i2s", "sync_input";
+ assigned-clocks = <&bpmp TEGRA186_CLK_I2S1>;
+ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <1536000>;
+ sound-name-prefix = "I2S1";
+ status = "disabled";
+ };
+
+ tegra_i2s2: i2s@2901100 {
+ compatible = "nvidia,tegra186-i2s",
+ "nvidia,tegra210-i2s";
+ reg = <0x2901100 0x100>;
+ clocks = <&bpmp TEGRA186_CLK_I2S2>,
+ <&bpmp TEGRA186_CLK_I2S2_SYNC_INPUT>;
+ clock-names = "i2s", "sync_input";
+ assigned-clocks = <&bpmp TEGRA186_CLK_I2S2>;
+ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <1536000>;
+ sound-name-prefix = "I2S2";
+ status = "disabled";
+ };
+
+ tegra_i2s3: i2s@2901200 {
+ compatible = "nvidia,tegra186-i2s",
+ "nvidia,tegra210-i2s";
+ reg = <0x2901200 0x100>;
+ clocks = <&bpmp TEGRA186_CLK_I2S3>,
+ <&bpmp TEGRA186_CLK_I2S3_SYNC_INPUT>;
+ clock-names = "i2s", "sync_input";
+ assigned-clocks = <&bpmp TEGRA186_CLK_I2S3>;
+ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <1536000>;
+ sound-name-prefix = "I2S3";
+ status = "disabled";
+ };
+
+ tegra_i2s4: i2s@2901300 {
+ compatible = "nvidia,tegra186-i2s",
+ "nvidia,tegra210-i2s";
+ reg = <0x2901300 0x100>;
+ clocks = <&bpmp TEGRA186_CLK_I2S4>,
+ <&bpmp TEGRA186_CLK_I2S4_SYNC_INPUT>;
+ clock-names = "i2s", "sync_input";
+ assigned-clocks = <&bpmp TEGRA186_CLK_I2S4>;
+ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <1536000>;
+ sound-name-prefix = "I2S4";
+ status = "disabled";
+ };
+
+ tegra_i2s5: i2s@2901400 {
+ compatible = "nvidia,tegra186-i2s",
+ "nvidia,tegra210-i2s";
+ reg = <0x2901400 0x100>;
+ clocks = <&bpmp TEGRA186_CLK_I2S5>,
+ <&bpmp TEGRA186_CLK_I2S5_SYNC_INPUT>;
+ clock-names = "i2s", "sync_input";
+ assigned-clocks = <&bpmp TEGRA186_CLK_I2S5>;
+ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <1536000>;
+ sound-name-prefix = "I2S5";
+ status = "disabled";
+ };
+
+ tegra_i2s6: i2s@2901500 {
+ compatible = "nvidia,tegra186-i2s",
+ "nvidia,tegra210-i2s";
+ reg = <0x2901500 0x100>;
+ clocks = <&bpmp TEGRA186_CLK_I2S6>,
+ <&bpmp TEGRA186_CLK_I2S6_SYNC_INPUT>;
+ clock-names = "i2s", "sync_input";
+ assigned-clocks = <&bpmp TEGRA186_CLK_I2S6>;
+ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <1536000>;
+ sound-name-prefix = "I2S6";
+ status = "disabled";
+ };
+
+ tegra_dmic1: dmic@2904000 {
+ compatible = "nvidia,tegra210-dmic";
+ reg = <0x2904000 0x100>;
+ clocks = <&bpmp TEGRA186_CLK_DMIC1>;
+ clock-names = "dmic";
+ assigned-clocks = <&bpmp TEGRA186_CLK_DMIC1>;
+ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <3072000>;
+ sound-name-prefix = "DMIC1";
+ status = "disabled";
+ };
+
+ tegra_dmic2: dmic@2904100 {
+ compatible = "nvidia,tegra210-dmic";
+ reg = <0x2904100 0x100>;
+ clocks = <&bpmp TEGRA186_CLK_DMIC2>;
+ clock-names = "dmic";
+ assigned-clocks = <&bpmp TEGRA186_CLK_DMIC2>;
+ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <3072000>;
+ sound-name-prefix = "DMIC2";
+ status = "disabled";
+ };
+
+ tegra_dmic3: dmic@2904200 {
+ compatible = "nvidia,tegra210-dmic";
+ reg = <0x2904200 0x100>;
+ clocks = <&bpmp TEGRA186_CLK_DMIC3>;
+ clock-names = "dmic";
+ assigned-clocks = <&bpmp TEGRA186_CLK_DMIC3>;
+ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <3072000>;
+ sound-name-prefix = "DMIC3";
+ status = "disabled";
+ };
+
+ tegra_dmic4: dmic@2904300 {
+ compatible = "nvidia,tegra210-dmic";
+ reg = <0x2904300 0x100>;
+ clocks = <&bpmp TEGRA186_CLK_DMIC4>;
+ clock-names = "dmic";
+ assigned-clocks = <&bpmp TEGRA186_CLK_DMIC4>;
+ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <3072000>;
+ sound-name-prefix = "DMIC4";
+ status = "disabled";
+ };
+
+ tegra_dspk1: dspk@2905000 {
+ compatible = "nvidia,tegra186-dspk";
+ reg = <0x2905000 0x100>;
+ clocks = <&bpmp TEGRA186_CLK_DSPK1>;
+ clock-names = "dspk";
+ assigned-clocks = <&bpmp TEGRA186_CLK_DSPK1>;
+ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <12288000>;
+ sound-name-prefix = "DSPK1";
+ status = "disabled";
+ };
+
+ tegra_dspk2: dspk@2905100 {
+ compatible = "nvidia,tegra186-dspk";
+ reg = <0x2905100 0x100>;
+ clocks = <&bpmp TEGRA186_CLK_DSPK2>;
+ clock-names = "dspk";
+ assigned-clocks = <&bpmp TEGRA186_CLK_DSPK2>;
+ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <12288000>;
+ sound-name-prefix = "DSPK2";
+ status = "disabled";
+ };
+ };
};
mc: memory-controller@2c00000 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index 4c005b8..d71b7a1 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -57,6 +57,22 @@ serial@3110000 {
status = "okay";
};
+ i2c@3160000 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+
+ label = "module";
+ vcc-supply = <&vdd_1v8ls>;
+ address-width = <8>;
+ pagesize = <8>;
+ size = <256>;
+ read-only;
+ };
+ };
+
/* SDMMC1 (SD/MMC) */
mmc@3400000 {
cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index 90b6ea5..54d057b 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -23,6 +23,20 @@ interrupt-controller@2a40000 {
};
};
+ i2c@3160000 {
+ eeprom@56 {
+ compatible = "atmel,24c02";
+ reg = <0x56>;
+
+ label = "system";
+ vcc-supply = <&vdd_1v8ls>;
+ address-width = <8>;
+ pagesize = <8>;
+ size = <256>;
+ read-only;
+ };
+ };
+
ddc: i2c@31c0000 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts
index c1c5898..7f97b34 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts
@@ -27,6 +27,20 @@ ddc: i2c@3190000 {
status = "okay";
};
+ i2c@3160000 {
+ eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+
+ label = "system";
+ vcc-supply = <&vdd_1v8>;
+ address-width = <8>;
+ pagesize = <8>;
+ size = <256>;
+ read-only;
+ };
+ };
+
hda@3510000 {
nvidia,model = "jetson-xavier-nx-hda";
status = "okay";
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
index 10cb836..a2893be 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
@@ -58,6 +58,22 @@ serial@c280000 {
status = "okay";
};
+ i2c@3160000 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+
+ label = "module";
+ vcc-supply = <&vdd_1v8ls>;
+ address-width = <8>;
+ pagesize = <8>;
+ size = <256>;
+ read-only;
+ };
+ };
+
/* SDMMC1 (SD/MMC) */
mmc@3400000 {
status = "okay";
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index ca5cb6a..e9c90f0 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -83,7 +83,7 @@ aconnect@2900000 {
ranges = <0x02900000 0x02900000 0x200000>;
status = "disabled";
- dma-controller@2930000 {
+ adma: dma-controller@2930000 {
compatible = "nvidia,tegra194-adma",
"nvidia,tegra186-adma";
reg = <0x02930000 0x20000>;
@@ -140,6 +140,229 @@ agic: interrupt-controller@2a40000 {
clock-names = "clk";
status = "disabled";
};
+
+ tegra_ahub: ahub@2900800 {
+ compatible = "nvidia,tegra194-ahub",
+ "nvidia,tegra186-ahub";
+ reg = <0x02900800 0x800>;
+ clocks = <&bpmp TEGRA194_CLK_AHUB>;
+ clock-names = "ahub";
+ assigned-clocks = <&bpmp TEGRA194_CLK_AHUB>;
+ assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x02900800 0x02900800 0x11800>;
+ status = "disabled";
+
+ tegra_admaif: admaif@290f000 {
+ compatible = "nvidia,tegra194-admaif",
+ "nvidia,tegra186-admaif";
+ reg = <0x0290f000 0x1000>;
+ dmas = <&adma 1>, <&adma 1>,
+ <&adma 2>, <&adma 2>,
+ <&adma 3>, <&adma 3>,
+ <&adma 4>, <&adma 4>,
+ <&adma 5>, <&adma 5>,
+ <&adma 6>, <&adma 6>,
+ <&adma 7>, <&adma 7>,
+ <&adma 8>, <&adma 8>,
+ <&adma 9>, <&adma 9>,
+ <&adma 10>, <&adma 10>,
+ <&adma 11>, <&adma 11>,
+ <&adma 12>, <&adma 12>,
+ <&adma 13>, <&adma 13>,
+ <&adma 14>, <&adma 14>,
+ <&adma 15>, <&adma 15>,
+ <&adma 16>, <&adma 16>,
+ <&adma 17>, <&adma 17>,
+ <&adma 18>, <&adma 18>,
+ <&adma 19>, <&adma 19>,
+ <&adma 20>, <&adma 20>;
+ dma-names = "rx1", "tx1",
+ "rx2", "tx2",
+ "rx3", "tx3",
+ "rx4", "tx4",
+ "rx5", "tx5",
+ "rx6", "tx6",
+ "rx7", "tx7",
+ "rx8", "tx8",
+ "rx9", "tx9",
+ "rx10", "tx10",
+ "rx11", "tx11",
+ "rx12", "tx12",
+ "rx13", "tx13",
+ "rx14", "tx14",
+ "rx15", "tx15",
+ "rx16", "tx16",
+ "rx17", "tx17",
+ "rx18", "tx18",
+ "rx19", "tx19",
+ "rx20", "tx20";
+ status = "disabled";
+ };
+
+ tegra_i2s1: i2s@2901000 {
+ compatible = "nvidia,tegra194-i2s",
+ "nvidia,tegra210-i2s";
+ reg = <0x2901000 0x100>;
+ clocks = <&bpmp TEGRA194_CLK_I2S1>,
+ <&bpmp TEGRA194_CLK_I2S1_SYNC_INPUT>;
+ clock-names = "i2s", "sync_input";
+ assigned-clocks = <&bpmp TEGRA194_CLK_I2S1>;
+ assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+ assigned-clock-rates = <1536000>;
+ sound-name-prefix = "I2S1";
+ status = "disabled";
+ };
+
+ tegra_i2s2: i2s@2901100 {
+ compatible = "nvidia,tegra194-i2s",
+ "nvidia,tegra210-i2s";
+ reg = <0x2901100 0x100>;
+ clocks = <&bpmp TEGRA194_CLK_I2S2>,
+ <&bpmp TEGRA194_CLK_I2S2_SYNC_INPUT>;
+ clock-names = "i2s", "sync_input";
+ assigned-clocks = <&bpmp TEGRA194_CLK_I2S2>;
+ assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+ assigned-clock-rates = <1536000>;
+ sound-name-prefix = "I2S2";
+ status = "disabled";
+ };
+
+ tegra_i2s3: i2s@2901200 {
+ compatible = "nvidia,tegra194-i2s",
+ "nvidia,tegra210-i2s";
+ reg = <0x2901200 0x100>;
+ clocks = <&bpmp TEGRA194_CLK_I2S3>,
+ <&bpmp TEGRA194_CLK_I2S3_SYNC_INPUT>;
+ clock-names = "i2s", "sync_input";
+ assigned-clocks = <&bpmp TEGRA194_CLK_I2S3>;
+ assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+ assigned-clock-rates = <1536000>;
+ sound-name-prefix = "I2S3";
+ status = "disabled";
+ };
+
+ tegra_i2s4: i2s@2901300 {
+ compatible = "nvidia,tegra194-i2s",
+ "nvidia,tegra210-i2s";
+ reg = <0x2901300 0x100>;
+ clocks = <&bpmp TEGRA194_CLK_I2S4>,
+ <&bpmp TEGRA194_CLK_I2S4_SYNC_INPUT>;
+ clock-names = "i2s", "sync_input";
+ assigned-clocks = <&bpmp TEGRA194_CLK_I2S4>;
+ assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+ assigned-clock-rates = <1536000>;
+ sound-name-prefix = "I2S4";
+ status = "disabled";
+ };
+
+ tegra_i2s5: i2s@2901400 {
+ compatible = "nvidia,tegra194-i2s",
+ "nvidia,tegra210-i2s";
+ reg = <0x2901400 0x100>;
+ clocks = <&bpmp TEGRA194_CLK_I2S5>,
+ <&bpmp TEGRA194_CLK_I2S5_SYNC_INPUT>;
+ clock-names = "i2s", "sync_input";
+ assigned-clocks = <&bpmp TEGRA194_CLK_I2S5>;
+ assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+ assigned-clock-rates = <1536000>;
+ sound-name-prefix = "I2S5";
+ status = "disabled";
+ };
+
+ tegra_i2s6: i2s@2901500 {
+ compatible = "nvidia,tegra194-i2s",
+ "nvidia,tegra210-i2s";
+ reg = <0x2901500 0x100>;
+ clocks = <&bpmp TEGRA194_CLK_I2S6>,
+ <&bpmp TEGRA194_CLK_I2S6_SYNC_INPUT>;
+ clock-names = "i2s", "sync_input";
+ assigned-clocks = <&bpmp TEGRA194_CLK_I2S6>;
+ assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+ assigned-clock-rates = <1536000>;
+ sound-name-prefix = "I2S6";
+ status = "disabled";
+ };
+
+ tegra_dmic1: dmic@2904000 {
+ compatible = "nvidia,tegra194-dmic",
+ "nvidia,tegra210-dmic";
+ reg = <0x2904000 0x100>;
+ clocks = <&bpmp TEGRA194_CLK_DMIC1>;
+ clock-names = "dmic";
+ assigned-clocks = <&bpmp TEGRA194_CLK_DMIC1>;
+ assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+ assigned-clock-rates = <3072000>;
+ sound-name-prefix = "DMIC1";
+ status = "disabled";
+ };
+
+ tegra_dmic2: dmic@2904100 {
+ compatible = "nvidia,tegra194-dmic",
+ "nvidia,tegra210-dmic";
+ reg = <0x2904100 0x100>;
+ clocks = <&bpmp TEGRA194_CLK_DMIC2>;
+ clock-names = "dmic";
+ assigned-clocks = <&bpmp TEGRA194_CLK_DMIC2>;
+ assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+ assigned-clock-rates = <3072000>;
+ sound-name-prefix = "DMIC2";
+ status = "disabled";
+ };
+
+ tegra_dmic3: dmic@2904200 {
+ compatible = "nvidia,tegra194-dmic",
+ "nvidia,tegra210-dmic";
+ reg = <0x2904200 0x100>;
+ clocks = <&bpmp TEGRA194_CLK_DMIC3>;
+ clock-names = "dmic";
+ assigned-clocks = <&bpmp TEGRA194_CLK_DMIC3>;
+ assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+ assigned-clock-rates = <3072000>;
+ sound-name-prefix = "DMIC3";
+ status = "disabled";
+ };
+
+ tegra_dmic4: dmic@2904300 {
+ compatible = "nvidia,tegra194-dmic",
+ "nvidia,tegra210-dmic";
+ reg = <0x2904300 0x100>;
+ clocks = <&bpmp TEGRA194_CLK_DMIC4>;
+ clock-names = "dmic";
+ assigned-clocks = <&bpmp TEGRA194_CLK_DMIC4>;
+ assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+ assigned-clock-rates = <3072000>;
+ sound-name-prefix = "DMIC4";
+ status = "disabled";
+ };
+
+ tegra_dspk1: dspk@2905000 {
+ compatible = "nvidia,tegra194-dspk",
+ "nvidia,tegra186-dspk";
+ reg = <0x2905000 0x100>;
+ clocks = <&bpmp TEGRA194_CLK_DSPK1>;
+ clock-names = "dspk";
+ assigned-clocks = <&bpmp TEGRA194_CLK_DSPK1>;
+ assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+ assigned-clock-rates = <12288000>;
+ sound-name-prefix = "DSPK1";
+ status = "disabled";
+ };
+
+ tegra_dspk2: dspk@2905100 {
+ compatible = "nvidia,tegra194-dspk",
+ "nvidia,tegra186-dspk";
+ reg = <0x2905100 0x100>;
+ clocks = <&bpmp TEGRA194_CLK_DSPK2>;
+ clock-names = "dspk";
+ assigned-clocks = <&bpmp TEGRA194_CLK_DSPK2>;
+ assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+ assigned-clock-rates = <12288000>;
+ sound-name-prefix = "DSPK2";
+ status = "disabled";
+ };
+ };
};
pinmux: pinmux@2430000 {
@@ -329,6 +552,9 @@ dp_aux_ch1_i2c: i2c@3190000 {
clock-names = "div-clk";
resets = <&bpmp TEGRA194_RESET_I2C4>;
reset-names = "i2c";
+ pinctrl-0 = <&state_dpaux1_i2c>;
+ pinctrl-1 = <&state_dpaux1_off>;
+ pinctrl-names = "default", "idle";
status = "disabled";
};
@@ -343,10 +569,14 @@ dp_aux_ch0_i2c: i2c@31b0000 {
clock-names = "div-clk";
resets = <&bpmp TEGRA194_RESET_I2C6>;
reset-names = "i2c";
+ pinctrl-0 = <&state_dpaux0_i2c>;
+ pinctrl-1 = <&state_dpaux0_off>;
+ pinctrl-names = "default", "idle";
status = "disabled";
};
- gen7_i2c: i2c@31c0000 {
+ /* shares pads with dpaux2 */
+ dp_aux_ch2_i2c: i2c@31c0000 {
compatible = "nvidia,tegra194-i2c";
reg = <0x031c0000 0x10000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
@@ -356,10 +586,14 @@ gen7_i2c: i2c@31c0000 {
clock-names = "div-clk";
resets = <&bpmp TEGRA194_RESET_I2C7>;
reset-names = "i2c";
+ pinctrl-0 = <&state_dpaux2_i2c>;
+ pinctrl-1 = <&state_dpaux2_off>;
+ pinctrl-names = "default", "idle";
status = "disabled";
};
- gen9_i2c: i2c@31e0000 {
+ /* shares pads with dpaux3 */
+ dp_aux_ch3_i2c: i2c@31e0000 {
compatible = "nvidia,tegra194-i2c";
reg = <0x031e0000 0x10000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
@@ -369,6 +603,9 @@ gen9_i2c: i2c@31e0000 {
clock-names = "div-clk";
resets = <&bpmp TEGRA194_RESET_I2C9>;
reset-names = "i2c";
+ pinctrl-0 = <&state_dpaux3_i2c>;
+ pinctrl-1 = <&state_dpaux3_off>;
+ pinctrl-names = "default", "idle";
status = "disabled";
};
@@ -1401,8 +1638,8 @@ sor3: sor@15bc0000 {
gpu@17000000 {
compatible = "nvidia,gv11b";
- reg = <0x17000000 0x10000000>,
- <0x18000000 0x10000000>;
+ reg = <0x17000000 0x1000000>,
+ <0x18000000 0x1000000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "stall", "nonstall";
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index 6a4b50a..6077d57 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -273,6 +273,7 @@ eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
+ label = "module";
vcc-supply = <&vdd_1v8>;
address-width = <8>;
pagesize = <8>;
@@ -337,7 +338,7 @@ psci {
vdd_gpu: regulator@100 {
compatible = "pwm-regulator";
- pwms = <&pwm 1 4880>;
+ pwms = <&pwm 1 8000>;
regulator-name = "VDD_GPU";
regulator-min-microvolt = <710000>;
regulator-max-microvolt = <1320000>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
index 56adf28..4c9c2a0 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
@@ -86,6 +86,7 @@ eeprom@57 {
compatible = "atmel,24c02";
reg = <0x57>;
+ label = "system";
vcc-supply = <&vdd_1v8>;
address-width = <8>;
pagesize = <8>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index 2282ea1..859241d 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -144,6 +144,7 @@ eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
+ label = "module";
vcc-supply = <&vdd_1v8>;
address-width = <8>;
pagesize = <8>;
@@ -155,6 +156,7 @@ eeprom@57 {
compatible = "atmel,24c02";
reg = <0x57>;
+ label = "system";
vcc-supply = <&vdd_1v8>;
address-width = <8>;
pagesize = <8>;
@@ -541,6 +543,8 @@ usb2-0 {
mode = "peripheral";
usb-role-switch;
+ vbus-supply = <&vdd_5v0_usb>;
+
connector {
compatible = "gpio-usb-b-connector",
"usb-b-connector";
@@ -574,6 +578,7 @@ mmc@700b0000 {
bus-width = <4>;
cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
+ disable-wp;
vqmmc-supply = <&vddio_sdmmc>;
vmmc-supply = <&vdd_3v3_sd>;
@@ -621,6 +626,18 @@ clock@70110000 {
pinctrl-1 = <&dvfs_pwm_inactive_state>;
};
+ aconnect@702c0000 {
+ status = "okay";
+
+ dma@702e2000 {
+ status = "okay";
+ };
+
+ interrupt-controller@702f9000 {
+ status = "okay";
+ };
+ };
+
clk32k_in: clock@0 {
compatible = "fixed-clock";
clock-frequency = <32768>;
@@ -818,7 +835,7 @@ vdd_cpu: regulator@5 {
vdd_gpu: regulator@6 {
compatible = "pwm-regulator";
- pwms = <&pwm 1 4880>;
+ pwms = <&pwm 1 8000>;
regulator-name = "VDD_GPU";
regulator-min-microvolt = <710000>;
@@ -843,4 +860,14 @@ avdd_io_edp_1v05: regulator@7 {
vin-supply = <&avdd_1v05_pll>;
};
+
+ vdd_5v0_usb: regulator@8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VDD_5V_USB";
+ regulator-min-microvolt = <50000000>;
+ regulator-max-microvolt = <50000000>;
+
+ vin-supply = <&vdd_5v0_sys>;
+ };
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 8cca216..d47c889 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -194,6 +194,7 @@ dc@54200000 {
iommus = <&mc TEGRA_SWGROUP_DC>;
+ nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
nvidia,head = <0>;
};
@@ -208,10 +209,11 @@ dc@54240000 {
iommus = <&mc TEGRA_SWGROUP_DCB>;
+ nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
nvidia,head = <1>;
};
- dsi@54300000 {
+ dsia: dsi@54300000 {
compatible = "nvidia,tegra210-dsi";
reg = <0x0 0x54300000 0x0 0x00040000>;
clocks = <&tegra_car TEGRA210_CLK_DSIA>,
@@ -248,7 +250,7 @@ nvjpg@54380000 {
status = "disabled";
};
- dsi@54400000 {
+ dsib: dsi@54400000 {
compatible = "nvidia,tegra210-dsi";
reg = <0x0 0x54400000 0x0 0x00040000>;
clocks = <&tegra_car TEGRA210_CLK_DSIB>,
@@ -284,7 +286,7 @@ tsec@54500000 {
status = "disabled";
};
- sor@54540000 {
+ sor0: sor@54540000 {
compatible = "nvidia,tegra210-sor";
reg = <0x0 0x54540000 0x0 0x00040000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -304,7 +306,7 @@ sor@54540000 {
status = "disabled";
};
- sor@54580000 {
+ sor1: sor@54580000 {
compatible = "nvidia,tegra210-sor1";
reg = <0x0 0x54580000 0x0 0x00040000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -1385,6 +1387,146 @@ agic: interrupt-controller@702f9000 {
clock-names = "clk";
status = "disabled";
};
+
+ tegra_ahub: ahub@702d0800 {
+ compatible = "nvidia,tegra210-ahub";
+ reg = <0x702d0800 0x800>;
+ clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+ clock-names = "ahub";
+ assigned-clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x702d0000 0x702d0000 0x0000e400>;
+ status = "disabled";
+
+ tegra_admaif: admaif@702d0000 {
+ compatible = "nvidia,tegra210-admaif";
+ reg = <0x702d0000 0x800>;
+ dmas = <&adma 1>, <&adma 1>,
+ <&adma 2>, <&adma 2>,
+ <&adma 3>, <&adma 3>,
+ <&adma 4>, <&adma 4>,
+ <&adma 5>, <&adma 5>,
+ <&adma 6>, <&adma 6>,
+ <&adma 7>, <&adma 7>,
+ <&adma 8>, <&adma 8>,
+ <&adma 9>, <&adma 9>,
+ <&adma 10>, <&adma 10>;
+ dma-names = "rx1", "tx1",
+ "rx2", "tx2",
+ "rx3", "tx3",
+ "rx4", "tx4",
+ "rx5", "tx5",
+ "rx6", "tx6",
+ "rx7", "tx7",
+ "rx8", "tx8",
+ "rx9", "tx9",
+ "rx10", "tx10";
+ status = "disabled";
+ };
+
+ tegra_i2s1: i2s@702d1000 {
+ compatible = "nvidia,tegra210-i2s";
+ reg = <0x702d1000 0x100>;
+ clocks = <&tegra_car TEGRA210_CLK_I2S0>,
+ <&tegra_car TEGRA210_CLK_I2S0_SYNC>;
+ clock-names = "i2s", "sync_input";
+ assigned-clocks = <&tegra_car TEGRA210_CLK_I2S0>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <1536000>;
+ sound-name-prefix = "I2S1";
+ status = "disabled";
+ };
+
+ tegra_i2s2: i2s@702d1100 {
+ compatible = "nvidia,tegra210-i2s";
+ reg = <0x702d1100 0x100>;
+ clocks = <&tegra_car TEGRA210_CLK_I2S1>,
+ <&tegra_car TEGRA210_CLK_I2S1_SYNC>;
+ clock-names = "i2s", "sync_input";
+ assigned-clocks = <&tegra_car TEGRA210_CLK_I2S1>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <1536000>;
+ sound-name-prefix = "I2S2";
+ status = "disabled";
+ };
+
+ tegra_i2s3: i2s@702d1200 {
+ compatible = "nvidia,tegra210-i2s";
+ reg = <0x702d1200 0x100>;
+ clocks = <&tegra_car TEGRA210_CLK_I2S2>,
+ <&tegra_car TEGRA210_CLK_I2S2_SYNC>;
+ clock-names = "i2s", "sync_input";
+ assigned-clocks = <&tegra_car TEGRA210_CLK_I2S2>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <1536000>;
+ sound-name-prefix = "I2S3";
+ status = "disabled";
+ };
+
+ tegra_i2s4: i2s@702d1300 {
+ compatible = "nvidia,tegra210-i2s";
+ reg = <0x702d1300 0x100>;
+ clocks = <&tegra_car TEGRA210_CLK_I2S3>,
+ <&tegra_car TEGRA210_CLK_I2S3_SYNC>;
+ clock-names = "i2s", "sync_input";
+ assigned-clocks = <&tegra_car TEGRA210_CLK_I2S3>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <1536000>;
+ sound-name-prefix = "I2S4";
+ status = "disabled";
+ };
+
+ tegra_i2s5: i2s@702d1400 {
+ compatible = "nvidia,tegra210-i2s";
+ reg = <0x702d1400 0x100>;
+ clocks = <&tegra_car TEGRA210_CLK_I2S4>,
+ <&tegra_car TEGRA210_CLK_I2S4_SYNC>;
+ clock-names = "i2s", "sync_input";
+ assigned-clocks = <&tegra_car TEGRA210_CLK_I2S4>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <1536000>;
+ sound-name-prefix = "I2S5";
+ status = "disabled";
+ };
+
+ tegra_dmic1: dmic@702d4000 {
+ compatible = "nvidia,tegra210-dmic";
+ reg = <0x702d4000 0x100>;
+ clocks = <&tegra_car TEGRA210_CLK_DMIC1>;
+ clock-names = "dmic";
+ assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC1>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <3072000>;
+ sound-name-prefix = "DMIC1";
+ status = "disabled";
+ };
+
+ tegra_dmic2: dmic@702d4100 {
+ compatible = "nvidia,tegra210-dmic";
+ reg = <0x702d4100 0x100>;
+ clocks = <&tegra_car TEGRA210_CLK_DMIC2>;
+ clock-names = "dmic";
+ assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC2>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <3072000>;
+ sound-name-prefix = "DMIC2";
+ status = "disabled";
+ };
+
+ tegra_dmic3: dmic@702d4200 {
+ compatible = "nvidia,tegra210-dmic";
+ reg = <0x702d4200 0x100>;
+ clocks = <&tegra_car TEGRA210_CLK_DMIC3>;
+ clock-names = "dmic";
+ assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC3>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+ assigned-clock-rates = <3072000>;
+ sound-name-prefix = "DMIC3";
+ status = "disabled";
+ };
+ };
};
spi@70410000 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts b/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts
new file mode 100644
index 0000000..f6e6a24
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra234.dtsi"
+
+/ {
+ model = "NVIDIA Tegra234 VDK";
+ compatible = "nvidia,tegra234-vdk", "nvidia,tegra234";
+
+ aliases {
+ sdhci3 = "/cbb@0/sdhci@3460000";
+ serial0 = &uarta;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x03100000";
+ stdout-path = "serial0:115200n8";
+ };
+
+ cbb@0 {
+ serial@3100000 {
+ status = "okay";
+ };
+
+ sdhci@3460000 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ only-1-8-v;
+ };
+
+ rtc@c2a0000 {
+ status = "okay";
+ };
+
+ pmc@c360000 {
+ nvidia,invert-interrupt;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
new file mode 100644
index 0000000..f0efb3a
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/tegra234-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/tegra186-hsp.h>
+#include <dt-bindings/reset/tegra234-reset.h>
+
+/ {
+ compatible = "nvidia,tegra234";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ bus@0 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x0 0x0 0x0 0x40000000>;
+
+ misc@100000 {
+ compatible = "nvidia,tegra234-misc";
+ reg = <0x00100000 0xf000>,
+ <0x0010f000 0x1000>;
+ status = "okay";
+ };
+
+ uarta: serial@3100000 {
+ compatible = "nvidia,tegra234-uart", "nvidia,tegra20-uart";
+ reg = <0x03100000 0x10000>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA234_CLK_UARTA>;
+ clock-names = "serial";
+ resets = <&bpmp TEGRA234_RESET_UARTA>;
+ reset-names = "serial";
+ status = "disabled";
+ };
+
+ mmc@3460000 {
+ compatible = "nvidia,tegra234-sdhci", "nvidia,tegra186-sdhci";
+ reg = <0x03460000 0x20000>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA234_CLK_SDMMC4>;
+ clock-names = "sdhci";
+ resets = <&bpmp TEGRA234_RESET_SDMMC4>;
+ reset-names = "sdhci";
+ dma-coherent;
+ status = "disabled";
+ };
+
+ fuse@3810000 {
+ compatible = "nvidia,tegra234-efuse";
+ reg = <0x03810000 0x10000>;
+ clocks = <&bpmp TEGRA234_CLK_FUSE>;
+ clock-names = "fuse";
+ };
+
+ hsp_top0: hsp@3c00000 {
+ compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp";
+ reg = <0x03c00000 0xa0000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "doorbell", "shared0", "shared1", "shared2",
+ "shared3", "shared4", "shared5", "shared6",
+ "shared7";
+ #mbox-cells = <2>;
+ };
+
+ hsp_aon: hsp@c150000 {
+ compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp";
+ reg = <0x0c150000 0x90000>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ /*
+ * Shared interrupt 0 is routed only to AON/SPE, so
+ * we only have 4 shared interrupts for the CCPLEX.
+ */
+ interrupt-names = "shared1", "shared2", "shared3", "shared4";
+ #mbox-cells = <2>;
+ };
+
+ rtc@c2a0000 {
+ compatible = "nvidia,tegra234-rtc", "nvidia,tegra20-rtc";
+ reg = <0x0c2a0000 0x10000>;
+ interrupt-parent = <&pmc>;
+ interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ pmc: pmc@c360000 {
+ compatible = "nvidia,tegra234-pmc";
+ reg = <0x0c360000 0x10000>,
+ <0x0c370000 0x10000>,
+ <0x0c380000 0x10000>,
+ <0x0c390000 0x10000>,
+ <0x0c3a0000 0x10000>;
+ reg-names = "pmc", "wake", "aotag", "scratch", "misc";
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gic: interrupt-controller@f400000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0f400000 0x010000>, /* GICD */
+ <0x0f440000 0x200000>; /* GICR */
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+
+ #redistributor-regions = <1>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ };
+ };
+
+ sysram@40000000 {
+ compatible = "nvidia,tegra234-sysram", "mmio-sram";
+ reg = <0x0 0x40000000 0x0 0x50000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x40000000 0x50000>;
+
+ cpu_bpmp_tx: shmem@4e000 {
+ reg = <0x4e000 0x1000>;
+ label = "cpu-bpmp-tx";
+ pool;
+ };
+
+ cpu_bpmp_rx: shmem@4f000 {
+ reg = <0x4f000 0x1000>;
+ label = "cpu-bpmp-rx";
+ pool;
+ };
+ };
+
+ bpmp: bpmp {
+ compatible = "nvidia,tegra234-bpmp", "nvidia,tegra186-bpmp";
+ mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
+ TEGRA_HSP_DB_MASTER_BPMP>;
+ shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+
+ bpmp_i2c: i2c {
+ compatible = "nvidia,tegra186-bpmp-i2c";
+ nvidia,bpmp-bus-id = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ reg = <0x000>;
+
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ status = "okay";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&gic>;
+ always-on;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d8f1466..fb4631f 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,11 +1,11 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
-dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
+dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
-dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
@@ -18,7 +18,16 @@
dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb
@@ -30,8 +39,7 @@
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb
-dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
-dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 1943435..3c7f975 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -3,38 +3,13 @@
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*/
-#include "msm8916.dtsi"
-#include "pm8916.dtsi"
+#include "msm8916-pm8916.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
#include <dt-bindings/sound/apq8016-lpass.h>
-/*
- * GPIO name legend: proper name = the GPIO line is used as GPIO
- * NC = not connected (pin out but not routed from the chip to
- * anything the board)
- * "[PER]" = pin is muxed for [peripheral] (not GPIO)
- * LSEC = Low Speed External Connector
- * HSEC = High Speed External Connector
- *
- * Line names are taken from the schematic "DragonBoard410c"
- * dated monday, august 31, 2015. Page 5 in particular.
- *
- * For the lines routed to the external connectors the
- * lines are named after the 96Boards CE Specification 1.0,
- * Appendix "Expansion Connector Signal Description".
- *
- * When the 96Board naming of a line and the schematic name of
- * the same line are in conflict, the 96Board specification
- * takes precedence, which means that the external UART on the
- * LSEC is named UART0 while the schematic and SoC names this
- * UART3. This is only for the informational lines i.e. "[FOO]",
- * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
- * ones actually used for GPIO.
- */
-
/ {
aliases {
serial0 = &blsp1_uart2;
@@ -76,7 +51,7 @@ camera_vddd_1v5: camera-vddd-1v5 {
};
reserved-memory {
- ramoops@bff00000{
+ ramoops@bff00000 {
compatible = "ramoops";
reg = <0x0 0xbff00000 0x0 0x100000>;
@@ -86,463 +61,6 @@ ramoops@bff00000{
};
};
- soc {
- pinctrl@1000000 {
- gpio-line-names =
- "[UART0_TX]", /* GPIO_0, LSEC pin 5 */
- "[UART0_RX]", /* GPIO_1, LSEC pin 7 */
- "[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */
- "[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */
- "[UART1_TX]", /* GPIO_4, LSEC pin 11 */
- "[UART1_RX]", /* GPIO_5, LSEC pin 13 */
- "[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */
- "[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
- "[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */
- "[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
- "[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */
- "[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */
- "GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
- "GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */
- "[I2C3_SDA]", /* HSEC pin 38 */
- "[I2C3_SCL]", /* HSEC pin 36 */
- "[SPI0_MOSI]", /* LSEC pin 14 */
- "[SPI0_MISO]", /* LSEC pin 10 */
- "[SPI0_CS_N]", /* LSEC pin 12 */
- "[SPI0_CLK]", /* LSEC pin 8 */
- "HDMI_HPD_N", /* GPIO 20 */
- "USR_LED_1_CTRL",
- "[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */
- "[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */
- "GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */
- "GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */
- "[CSI0_MCLK]", /* HSEC pin 15 */
- "[CSI1_MCLK]", /* HSEC pin 17 */
- "GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */
- "[I2C2_SDA]", /* HSEC pin 34 */
- "[I2C2_SCL]", /* HSEC pin 32 */
- "DSI2HDMI_INT_N",
- "DSI_SW_SEL_APQ",
- "GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */
- "GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */
- "GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */
- "GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */
- "FORCED_USB_BOOT",
- "SD_CARD_DET_N",
- "[WCSS_BT_SSBI]",
- "[WCSS_WLAN_DATA_2]", /* GPIO 40 */
- "[WCSS_WLAN_DATA_1]",
- "[WCSS_WLAN_DATA_0]",
- "[WCSS_WLAN_SET]",
- "[WCSS_WLAN_CLK]",
- "[WCSS_FM_SSBI]",
- "[WCSS_FM_SDI]",
- "[WCSS_BT_DAT_CTL]",
- "[WCSS_BT_DAT_STB]",
- "NC",
- "NC", /* GPIO 50 */
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC", /* GPIO 60 */
- "NC",
- "NC",
- "[CDC_PDM0_CLK]",
- "[CDC_PDM0_SYNC]",
- "[CDC_PDM0_TX0]",
- "[CDC_PDM0_RX0]",
- "[CDC_PDM0_RX1]",
- "[CDC_PDM0_RX2]",
- "GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */
- "NC", /* GPIO 70 */
- "NC",
- "NC",
- "NC",
- "NC", /* GPIO 74 */
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "BOOT_CONFIG_0", /* GPIO 80 */
- "BOOT_CONFIG_1",
- "BOOT_CONFIG_2",
- "BOOT_CONFIG_3",
- "NC",
- "NC",
- "BOOT_CONFIG_5",
- "NC",
- "NC",
- "NC",
- "NC", /* GPIO 90 */
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC", /* GPIO 100 */
- "NC",
- "NC",
- "NC",
- "SSBI_GPS",
- "NC",
- "NC",
- "KEY_VOLP_N",
- "NC",
- "NC",
- "[LS_EXP_MI2S_WS]", /* GPIO 110 */
- "NC",
- "NC",
- "[LS_EXP_MI2S_SCK]",
- "[LS_EXP_MI2S_DATA0]",
- "GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */
- "NC",
- "[DSI2HDMI_MI2S_WS]",
- "[DSI2HDMI_MI2S_SCK]",
- "[DSI2HDMI_MI2S_DATA0]",
- "USR_LED_2_CTRL", /* GPIO 120 */
- "SB_HS_ID";
- };
-
- dma@7884000 {
- status = "okay";
- };
-
- serial@78af000 {
- label = "LS-UART0";
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_uart1_default>;
- pinctrl-1 = <&blsp1_uart1_sleep>;
- };
-
- serial@78b0000 {
- label = "LS-UART1";
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_uart2_default>;
- pinctrl-1 = <&blsp1_uart2_sleep>;
- };
-
- i2c@78b6000 {
- /* On Low speed expansion */
- label = "LS-I2C0";
- status = "okay";
- };
-
- i2c@78b8000 {
- /* On High speed expansion */
- label = "HS-I2C2";
- status = "okay";
-
- adv_bridge: bridge@39 {
- status = "okay";
-
- compatible = "adi,adv7533";
- reg = <0x39>;
-
- interrupt-parent = <&msmgpio>;
- interrupts = <31 2>;
-
- adi,dsi-lanes = <4>;
- clocks = <&rpmcc RPM_SMD_BB_CLK2>;
- clock-names = "cec";
-
- pd-gpios = <&msmgpio 32 0>;
-
- avdd-supply = <&pm8916_l6>;
- v1p2-supply = <&pm8916_l6>;
- v3p3-supply = <&pm8916_l17>;
-
- pinctrl-names = "default","sleep";
- pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
- pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
- #sound-dai-cells = <1>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7533_in: endpoint {
- remote-endpoint = <&dsi0_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- adv7533_out: endpoint {
- remote-endpoint = <&hdmi_con>;
- };
- };
- };
- };
- };
-
- i2c@78ba000 {
- /* On Low speed expansion */
- label = "LS-I2C1";
- status = "okay";
- };
-
- spi@78b7000 {
- /* On High speed expansion */
- label = "HS-SPI1";
- status = "okay";
- };
-
- spi@78b9000 {
- /* On Low speed expansion */
- label = "LS-SPI0";
- status = "okay";
- };
-
- leds {
- pinctrl-names = "default";
- pinctrl-0 = <&msmgpio_leds>,
- <&pm8916_gpios_leds>,
- <&pm8916_mpps_leds>;
-
- compatible = "gpio-leds";
-
- led@1 {
- label = "apq8016-sbc:green:user1";
- gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- default-state = "off";
- };
-
- led@2 {
- label = "apq8016-sbc:green:user2";
- gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "mmc0";
- default-state = "off";
- };
-
- led@3 {
- label = "apq8016-sbc:green:user3";
- gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "mmc1";
- default-state = "off";
- };
-
- led@4 {
- label = "apq8016-sbc:green:user4";
- gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "none";
- panic-indicator;
- default-state = "off";
- };
-
- led@5 {
- label = "apq8016-sbc:yellow:wlan";
- gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tx";
- default-state = "off";
- };
-
- led@6 {
- label = "apq8016-sbc:blue:bt";
- gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "bluetooth-power";
- default-state = "off";
- };
- };
-
- sdhci@7824000 {
- vmmc-supply = <&pm8916_l8>;
- vqmmc-supply = <&pm8916_l5>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
- status = "okay";
- };
-
- sdhci@7864000 {
- vmmc-supply = <&pm8916_l11>;
- vqmmc-supply = <&pm8916_l12>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
-
- cd-gpios = <&msmgpio 38 0x1>;
- status = "okay";
- };
-
- usb@78d9000 {
- extcon = <&usb_id>, <&usb_id>;
- status = "okay";
- adp-disable;
- hnp-disable;
- srp-disable;
- dr_mode = "otg";
- pinctrl-names = "default", "device";
- pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
- pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
- ulpi {
- phy {
- v1p8-supply = <&pm8916_l7>;
- v3p3-supply = <&pm8916_l13>;
- extcon = <&usb_id>;
- };
- };
- };
-
- lpass@7708000 {
- status = "okay";
- };
-
- mdss@1a00000 {
- status = "okay";
-
- mdp@1a01000 {
- status = "okay";
- };
-
- dsi@1a98000 {
- status = "okay";
-
- vdda-supply = <&pm8916_l2>;
- vddio-supply = <&pm8916_l6>;
-
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <&adv7533_in>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
- };
-
- dsi-phy@1a98300 {
- status = "okay";
-
- vddio-supply = <&pm8916_l6>;
- };
- };
-
- lpass_codec: codec{
- status = "okay";
- };
-
- /*
- Internal Codec
- playback - Primary MI2S
- capture - Ter MI2S
-
- External Primary:
- playback - secondary MI2S
- capture - Quat MI2S
-
- External Secondary:
- playback - Quat MI2S
- capture - Quat MI2S
-
- */
-
- sound: sound {
- compatible = "qcom,apq8016-sbc-sndcard";
- reg = <0x07702000 0x4>, <0x07702004 0x4>;
- reg-names = "mic-iomux", "spkr-iomux";
-
- status = "okay";
- pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
- pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
- pinctrl-names = "default", "sleep";
- qcom,model = "DB410c";
- qcom,audio-routing =
- "AMIC2", "MIC BIAS Internal2",
- "AMIC3", "MIC BIAS External1";
-
- external-dai-link@0 {
- link-name = "ADV7533";
- cpu {
- sound-dai = <&lpass MI2S_QUATERNARY>;
- };
- codec {
- sound-dai = <&adv_bridge 0>;
- };
- };
-
- internal-codec-playback-dai-link@0 {
- link-name = "WCD";
- cpu {
- sound-dai = <&lpass MI2S_PRIMARY>;
- };
- codec {
- sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
- };
- };
-
- internal-codec-capture-dai-link@0 {
- link-name = "WCD-Capture";
- cpu {
- sound-dai = <&lpass MI2S_TERTIARY>;
- };
- codec {
- sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
- };
- };
- };
-
- spmi@200f000 {
- pm8916@0 {
- gpios@c000 {
- gpio-line-names =
- "USR_LED_3_CTRL",
- "USR_LED_4_CTRL",
- "USB_HUB_RESET_N_PM",
- "USB_SW_SEL_PM";
- };
- mpps@a000 {
- gpio-line-names =
- "VDD_PX_BIAS",
- "WLAN_LED_CTRL",
- "BT_LED_CTRL",
- "GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
- };
- };
- };
-
- wcnss@a21b000 {
- status = "okay";
- };
-
- tpiu@820000 { status = "okay"; };
- funnel@821000 { status = "okay"; };
- replicator@824000 { status = "okay"; };
- etf@825000 { status = "okay"; };
- etr@826000 { status = "okay"; };
- funnel@841000 { status = "okay"; };
- debug@850000 { status = "okay"; };
- debug@852000 { status = "okay"; };
- debug@854000 { status = "okay"; };
- debug@856000 { status = "okay"; };
- etm@85c000 { status = "okay"; };
- etm@85d000 { status = "okay"; };
- etm@85e000 { status = "okay"; };
- etm@85f000 { status = "okay"; };
- cti@810000 { status = "okay"; };
- cti@811000 { status = "okay"; };
- cti@858000 { status = "okay"; };
- cti@859000 { status = "okay"; };
- cti@85a000 { status = "okay"; };
- cti@85b000 { status = "okay"; };
- };
-
usb2513 {
compatible = "smsc,usb3503";
reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
@@ -582,13 +100,151 @@ button@0 {
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
};
};
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&msmgpio_leds>,
+ <&pm8916_gpios_leds>,
+ <&pm8916_mpps_leds>;
+
+ compatible = "gpio-leds";
+
+ led@1 {
+ label = "apq8016-sbc:green:user1";
+ gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led@2 {
+ label = "apq8016-sbc:green:user2";
+ gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led@3 {
+ label = "apq8016-sbc:green:user3";
+ gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+
+ led@4 {
+ label = "apq8016-sbc:green:user4";
+ gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ panic-indicator;
+ default-state = "off";
+ };
+
+ led@5 {
+ label = "apq8016-sbc:yellow:wlan";
+ gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+
+ led@6 {
+ label = "apq8016-sbc:blue:bt";
+ gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "bluetooth-power";
+ default-state = "off";
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp_i2c2 {
+ /* On Low speed expansion */
+ status = "okay";
+ label = "LS-I2C0";
+};
+
+&blsp_i2c4 {
+ /* On High speed expansion */
+ status = "okay";
+ label = "HS-I2C2";
+
+ adv_bridge: bridge@39 {
+ status = "okay";
+
+ compatible = "adi,adv7533";
+ reg = <0x39>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+
+ adi,dsi-lanes = <4>;
+ clocks = <&rpmcc RPM_SMD_BB_CLK2>;
+ clock-names = "cec";
+
+ pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
+
+ avdd-supply = <&pm8916_l6>;
+ v1p2-supply = <&pm8916_l6>;
+ v3p3-supply = <&pm8916_l17>;
+
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
+ pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
+ #sound-dai-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7533_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7533_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&blsp_i2c6 {
+ /* On Low speed expansion */
+ status = "okay";
+ label = "LS-I2C1";
+};
+
+&blsp_spi3 {
+ /* On High speed expansion */
+ status = "okay";
+ label = "HS-SPI1";
+};
+
+&blsp_spi5 {
+ /* On Low speed expansion */
+ status = "okay";
+ label = "LS-SPI0";
+};
+
+&blsp1_uart1 {
+ status = "okay";
+ label = "LS-UART0";
+};
+
+&blsp1_uart2 {
+ status = "okay";
+ label = "LS-UART1";
};
&camss {
- status = "ok";
+ status = "okay";
ports {
- #address-cells = <1>;
- #size-cells = <0>;
port@0 {
reg = <0>;
csiphy0_ep: endpoint {
@@ -602,7 +258,7 @@ csiphy0_ep: endpoint {
};
&cci {
- status = "ok";
+ status = "okay";
};
&cci_i2c0 {
@@ -636,28 +292,126 @@ ov5640_ep: endpoint {
};
};
-&spmi_bus {
- pm8916_0: pm8916@0 {
- pon@800 {
- resin {
- compatible = "qcom,pm8941-resin";
- interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- linux,code = <KEY_VOLUMEDOWN>;
- };
+&dsi0_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&adv7533_in>;
+};
+
+&lpass {
+ status = "okay";
+};
+
+&pm8916_resin {
+ status = "okay";
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pronto {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+ cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+ status = "okay";
+
+ pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
+ pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
+ pinctrl-names = "default", "sleep";
+ qcom,model = "DB410c";
+ qcom,audio-routing =
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS External1";
+
+ external-dai-link@0 {
+ link-name = "ADV7533";
+ cpu {
+ sound-dai = <&lpass MI2S_QUATERNARY>;
+ };
+ codec {
+ sound-dai = <&adv_bridge 0>;
+ };
+ };
+
+ internal-codec-playback-dai-link@0 {
+ link-name = "WCD";
+ cpu {
+ sound-dai = <&lpass MI2S_PRIMARY>;
+ };
+ codec {
+ sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+ };
+ };
+
+ internal-codec-capture-dai-link@0 {
+ link-name = "WCD-Capture";
+ cpu {
+ sound-dai = <&lpass MI2S_TERTIARY>;
+ };
+ codec {
+ sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
};
};
};
-&wcd_codec {
+&usb {
status = "okay";
+ extcon = <&usb_id>, <&usb_id>;
+
+ pinctrl-names = "default", "device";
+ pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
+ pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
+};
+
+&usb_hs_phy {
+ extcon = <&usb_id>;
+};
+
+&wcd_codec {
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
clock-names = "mclk";
qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
};
+/* Enable CoreSight */
+&cti0 { status = "okay"; };
+&cti1 { status = "okay"; };
+&cti12 { status = "okay"; };
+&cti13 { status = "okay"; };
+&cti14 { status = "okay"; };
+&cti15 { status = "okay"; };
+&debug0 { status = "okay"; };
+&debug1 { status = "okay"; };
+&debug2 { status = "okay"; };
+&debug3 { status = "okay"; };
+&etf { status = "okay"; };
+&etm0 { status = "okay"; };
+&etm1 { status = "okay"; };
+&etm2 { status = "okay"; };
+&etm3 { status = "okay"; };
+&etr { status = "okay"; };
+&funnel0 { status = "okay"; };
+&funnel1 { status = "okay"; };
+&replicator { status = "okay"; };
+&tpiu { status = "okay"; };
+
&smd_rpm_regulators {
vdd_l1_l2_l3-supply = <&pm8916_s3>;
vdd_l4_l5_l6-supply = <&pm8916_s4>;
@@ -795,7 +549,155 @@ &i2c6_default {
drive-strength = <16>;
};
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ * NC = not connected (pin out but not routed from the chip to
+ * anything the board)
+ * "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ * LSEC = Low Speed External Connector
+ * HSEC = High Speed External Connector
+ *
+ * Line names are taken from the schematic "DragonBoard410c"
+ * dated monday, august 31, 2015. Page 5 in particular.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+
&msmgpio {
+ gpio-line-names =
+ "[UART0_TX]", /* GPIO_0, LSEC pin 5 */
+ "[UART0_RX]", /* GPIO_1, LSEC pin 7 */
+ "[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */
+ "[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */
+ "[UART1_TX]", /* GPIO_4, LSEC pin 11 */
+ "[UART1_RX]", /* GPIO_5, LSEC pin 13 */
+ "[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */
+ "[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
+ "[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */
+ "[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
+ "[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */
+ "[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */
+ "GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
+ "GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */
+ "[I2C3_SDA]", /* HSEC pin 38 */
+ "[I2C3_SCL]", /* HSEC pin 36 */
+ "[SPI0_MOSI]", /* LSEC pin 14 */
+ "[SPI0_MISO]", /* LSEC pin 10 */
+ "[SPI0_CS_N]", /* LSEC pin 12 */
+ "[SPI0_CLK]", /* LSEC pin 8 */
+ "HDMI_HPD_N", /* GPIO 20 */
+ "USR_LED_1_CTRL",
+ "[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */
+ "[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */
+ "GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */
+ "GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */
+ "[CSI0_MCLK]", /* HSEC pin 15 */
+ "[CSI1_MCLK]", /* HSEC pin 17 */
+ "GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */
+ "[I2C2_SDA]", /* HSEC pin 34 */
+ "[I2C2_SCL]", /* HSEC pin 32 */
+ "DSI2HDMI_INT_N",
+ "DSI_SW_SEL_APQ",
+ "GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */
+ "GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */
+ "GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */
+ "GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */
+ "FORCED_USB_BOOT",
+ "SD_CARD_DET_N",
+ "[WCSS_BT_SSBI]",
+ "[WCSS_WLAN_DATA_2]", /* GPIO 40 */
+ "[WCSS_WLAN_DATA_1]",
+ "[WCSS_WLAN_DATA_0]",
+ "[WCSS_WLAN_SET]",
+ "[WCSS_WLAN_CLK]",
+ "[WCSS_FM_SSBI]",
+ "[WCSS_FM_SDI]",
+ "[WCSS_BT_DAT_CTL]",
+ "[WCSS_BT_DAT_STB]",
+ "NC",
+ "NC", /* GPIO 50 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC", /* GPIO 60 */
+ "NC",
+ "NC",
+ "[CDC_PDM0_CLK]",
+ "[CDC_PDM0_SYNC]",
+ "[CDC_PDM0_TX0]",
+ "[CDC_PDM0_RX0]",
+ "[CDC_PDM0_RX1]",
+ "[CDC_PDM0_RX2]",
+ "GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */
+ "NC", /* GPIO 70 */
+ "NC",
+ "NC",
+ "NC",
+ "NC", /* GPIO 74 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "BOOT_CONFIG_0", /* GPIO 80 */
+ "BOOT_CONFIG_1",
+ "BOOT_CONFIG_2",
+ "BOOT_CONFIG_3",
+ "NC",
+ "NC",
+ "BOOT_CONFIG_5",
+ "NC",
+ "NC",
+ "NC",
+ "NC", /* GPIO 90 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC", /* GPIO 100 */
+ "NC",
+ "NC",
+ "NC",
+ "SSBI_GPS",
+ "NC",
+ "NC",
+ "KEY_VOLP_N",
+ "NC",
+ "NC",
+ "[LS_EXP_MI2S_WS]", /* GPIO 110 */
+ "NC",
+ "NC",
+ "[LS_EXP_MI2S_SCK]",
+ "[LS_EXP_MI2S_DATA0]",
+ "GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */
+ "NC",
+ "[DSI2HDMI_MI2S_WS]",
+ "[DSI2HDMI_MI2S_SCK]",
+ "[DSI2HDMI_MI2S_DATA0]",
+ "USR_LED_2_CTRL", /* GPIO 120 */
+ "SB_HS_ID";
+
msmgpio_leds: msmgpio-leds {
pins = "gpio21", "gpio120";
function = "gpio";
@@ -855,6 +757,12 @@ msm_key_volp_n_default: msm-key-volp-n-default {
};
&pm8916_gpios {
+ gpio-line-names =
+ "USR_LED_3_CTRL",
+ "USR_LED_4_CTRL",
+ "USB_HUB_RESET_N_PM",
+ "USB_SW_SEL_PM";
+
usb_hub_reset_pm: usb-hub-reset-pm {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
@@ -897,6 +805,12 @@ pm8916_gpios_leds: pm8916-gpios-leds {
};
&pm8916_mpps {
+ gpio-line-names =
+ "VDD_PX_BIAS",
+ "WLAN_LED_CTRL",
+ "BT_LED_CTRL",
+ "GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
+
pinctrl-names = "default";
pinctrl-0 = <&ls_exp_gpio_f>;
diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
index b31117a..e8eaa95 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
+++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
@@ -26,18 +26,18 @@ chosen {
&blsp1_uart3 {
pinctrl-0 = <&serial_3_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
&i2c_1 {
pinctrl-0 = <&i2c_1_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
&spi_0 {
cs-select = <0>;
- status = "ok";
+ status = "okay";
m25p80@0 {
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 1aa8d85..a94dac76 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-ipq6018.h>
#include <dt-bindings/reset/qcom,gcc-ipq6018.h>
+#include <dt-bindings/clock/qcom,apss-ipq.h>
/ {
#address-cells = <2>;
@@ -38,6 +39,10 @@ CPU0: cpu@0 {
reg = <0x0>;
enable-method = "psci";
next-level-cache = <&L2_0>;
+ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ cpu-supply = <&ipq6018_s2>;
};
CPU1: cpu@1 {
@@ -46,6 +51,10 @@ CPU1: cpu@1 {
enable-method = "psci";
reg = <0x1>;
next-level-cache = <&L2_0>;
+ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ cpu-supply = <&ipq6018_s2>;
};
CPU2: cpu@2 {
@@ -54,6 +63,10 @@ CPU2: cpu@2 {
enable-method = "psci";
reg = <0x2>;
next-level-cache = <&L2_0>;
+ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ cpu-supply = <&ipq6018_s2>;
};
CPU3: cpu@3 {
@@ -62,6 +75,10 @@ CPU3: cpu@3 {
enable-method = "psci";
reg = <0x3>;
next-level-cache = <&L2_0>;
+ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ cpu-supply = <&ipq6018_s2>;
};
L2_0: l2-cache {
@@ -70,6 +87,42 @@ L2_0: l2-cache {
};
};
+ cpu_opp_table: cpu_opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-864000000 {
+ opp-hz = /bits/ 64 <864000000>;
+ opp-microvolt = <725000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ opp-microvolt = <787500>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1320000000 {
+ opp-hz = /bits/ 64 <1320000000>;
+ opp-microvolt = <862500>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1440000000 {
+ opp-hz = /bits/ 64 <1440000000>;
+ opp-microvolt = <925000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1608000000 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <987500>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1062500>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
firmware {
scm {
compatible = "qcom,scm";
@@ -98,6 +151,11 @@ reserved-memory {
#size-cells = <2>;
ranges;
+ rpm_msg_ram: memory@0x60000 {
+ reg = <0x0 0x60000 0x0 0x6000>;
+ no-map;
+ };
+
tz: tz@48500000 {
reg = <0x0 0x48500000 0x0 0x00200000>;
no-map;
@@ -294,12 +352,22 @@ watchdog@b017000 {
};
apcs_glb: mailbox@b111000 {
- compatible = "qcom,ipq8074-apcs-apps-global";
- reg = <0x0b111000 0xc>;
-
+ compatible = "qcom,ipq6018-apcs-apps-global";
+ reg = <0x0b111000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&a53pll>, <&xo>;
+ clock-names = "pll", "xo";
#mbox-cells = <1>;
};
+ a53pll: clock@b116000 {
+ compatible = "qcom,ipq6018-a53pll";
+ reg = <0x0b116000 0x40>;
+ #clock-cells = <0>;
+ clocks = <&xo>;
+ clock-names = "xo";
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -440,4 +508,26 @@ wcss_smp2p_in: slave-kernel {
#interrupt-cells = <2>;
};
};
+
+ rpm-glink {
+ compatible = "qcom,glink-rpm";
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: glink-channel {
+ compatible = "qcom,rpm-ipq6018";
+ qcom,glink-channels = "rpm_requests";
+
+ regulators {
+ compatible = "qcom,rpm-mp5496-regulators";
+
+ ipq6018_s2: s2 {
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1062500>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index f4a7616..e8c37a1 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -27,11 +27,11 @@ memory {
};
&blsp1_i2c2 {
- status = "ok";
+ status = "okay";
};
&blsp1_spi1 {
- status = "ok";
+ status = "okay";
m25p80@0 {
#address-cells = <1>;
@@ -43,37 +43,37 @@ m25p80@0 {
};
&blsp1_uart3 {
- status = "ok";
+ status = "okay";
};
&blsp1_uart5 {
- status = "ok";
+ status = "okay";
};
&pcie0 {
- status = "ok";
+ status = "okay";
perst-gpio = <&tlmm 61 0x1>;
};
&pcie1 {
- status = "ok";
+ status = "okay";
perst-gpio = <&tlmm 58 0x1>;
};
&pcie_phy0 {
- status = "ok";
+ status = "okay";
};
&pcie_phy1 {
- status = "ok";
+ status = "okay";
};
&qpic_bam {
- status = "ok";
+ status = "okay";
};
&qpic_nand {
- status = "ok";
+ status = "okay";
nand@0 {
reg = <0>;
@@ -84,29 +84,29 @@ nand@0 {
};
&sdhc_1 {
- status = "ok";
+ status = "okay";
};
&qusb_phy_0 {
- status = "ok";
+ status = "okay";
};
&qusb_phy_1 {
- status = "ok";
+ status = "okay";
};
&ssphy_0 {
- status = "ok";
+ status = "okay";
};
&ssphy_1 {
- status = "ok";
+ status = "okay";
};
&usb_0 {
- status = "ok";
+ status = "okay";
};
&usb_1 {
- status = "ok";
+ status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 96a5ec8..829e37a 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -67,7 +67,7 @@ L2_0: l2-cache {
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
@@ -498,6 +498,14 @@ timer {
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+ watchdog: watchdog@b017000 {
+ compatible = "qcom,kpss-wdt";
+ reg = <0xb017000 0x1000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&sleep_clk>;
+ timeout-sec = <30>;
+ };
+
timer@b120000 {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index 9f2c8e9..b9d3c5d 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -2,8 +2,7 @@
/dts-v1/;
-#include "msm8916.dtsi"
-#include "pm8916.dtsi"
+#include "msm8916-pm8916.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
@@ -29,61 +28,6 @@ wcnss_mem: wcnss@8b600000 {
};
};
- soc {
- sdhci@7824000 {
- status = "okay";
-
- vmmc-supply = <&pm8916_l8>;
- vqmmc-supply = <&pm8916_l5>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
- };
-
- sdhci@7864000 {
- status = "okay";
-
- vmmc-supply = <&pm8916_l11>;
- vqmmc-supply = <&pm8916_l12>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
-
- non-removable;
- };
-
- serial@78b0000 {
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_uart2_default>;
- pinctrl-1 = <&blsp1_uart2_sleep>;
- };
-
- usb@78d9000 {
- status = "okay";
- dr_mode = "peripheral";
- extcon = <&usb_vbus>;
-
- hnp-disable;
- srp-disable;
- adp-disable;
-
- ulpi {
- phy {
- extcon = <&usb_vbus>;
- v1p8-supply = <&pm8916_l7>;
- v3p3-supply = <&pm8916_l13>;
- };
- };
- };
-
- wcnss@a21b000 {
- status = "okay";
- };
- };
-
// FIXME: Use extcon device provided by charger driver when available
usb_vbus: usb-vbus {
compatible = "linux,extcon-usb-gpio";
@@ -108,17 +52,45 @@ volume-up {
};
};
-&spmi_bus {
- pm8916@0 {
- pon@800 {
- volume-down {
- compatible = "qcom,pm8941-resin";
- interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
- bias-pull-up;
- linux,code = <KEY_VOLUMEDOWN>;
- };
- };
- };
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&pm8916_resin {
+ status = "okay";
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pronto {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+
+ non-removable;
+};
+
+&usb {
+ status = "okay";
+ dr_mode = "peripheral";
+ extcon = <&usb_vbus>;
+};
+
+&usb_hs_phy {
+ extcon = <&usb_vbus>;
};
&smd_rpm_regulators {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
index 0c6e81f..1bd0504 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
@@ -3,8 +3,7 @@
* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
*/
-#include "msm8916.dtsi"
-#include "pm8916.dtsi"
+#include "msm8916-pm8916.dtsi"
/ {
aliases {
@@ -15,13 +14,8 @@ aliases {
chosen {
stdout-path = "serial0";
};
+};
- soc {
- serial@78b0000 {
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_uart2_default>;
- pinctrl-1 = <&blsp1_uart2_sleep>;
- };
- };
+&blsp1_uart2 {
+ status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi
new file mode 100644
index 0000000..cd626e7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916.dtsi"
+#include "pm8916.dtsi"
+
+&camss {
+ vdda-supply = <&pm8916_l2>;
+};
+
+&dsi0 {
+ vdda-supply = <&pm8916_l2>;
+ vddio-supply = <&pm8916_l6>;
+};
+
+&dsi_phy0 {
+ vddio-supply = <&pm8916_l6>;
+};
+
+&mpss {
+ cx-supply = <&pm8916_s1>;
+ mx-supply = <&pm8916_l3>;
+ pll-supply = <&pm8916_l7>;
+};
+
+&pronto {
+ vddmx-supply = <&pm8916_l3>;
+ vddpx-supply = <&pm8916_l7>;
+
+ iris {
+ vddxo-supply = <&pm8916_l7>;
+ vddrfa-supply = <&pm8916_s3>;
+ vddpa-supply = <&pm8916_l9>;
+ vdddig-supply = <&pm8916_l5>;
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8916_l8>;
+ vqmmc-supply = <&pm8916_l5>;
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8916_l11>;
+ vqmmc-supply = <&pm8916_l12>;
+};
+
+&usb_hs_phy {
+ v1p8-supply = <&pm8916_l7>;
+ v3p3-supply = <&pm8916_l13>;
+};
+
+&rpm_requests {
+ smd_rpm_regulators: pm8916-regulators {
+ compatible = "qcom,rpm-pm8916-regulators";
+
+ pm8916_s1: s1 {};
+ pm8916_s3: s3 {};
+ pm8916_s4: s4 {};
+
+ pm8916_l1: l1 {};
+ pm8916_l2: l2 {};
+ pm8916_l3: l3 {};
+ pm8916_l4: l4 {};
+ pm8916_l5: l5 {};
+ pm8916_l6: l6 {};
+ pm8916_l7: l7 {};
+ pm8916_l8: l8 {};
+ pm8916_l9: l9 {};
+ pm8916_l10: l10 {};
+ pm8916_l11: l11 {};
+ pm8916_l12: l12 {};
+ pm8916_l13: l13 {};
+ pm8916_l14: l14 {};
+ pm8916_l15: l15 {};
+ pm8916_l16: l16 {};
+ pm8916_l17: l17 {};
+ pm8916_l18: l18 {};
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index a0c00d9..b18d21e 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -1,7 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
-#include "msm8916.dtsi"
-#include "pm8916.dtsi"
+#include "msm8916-pm8916.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -23,78 +22,6 @@ tz-apps@85500000 {
};
};
- soc {
- sdhci@7824000 {
- status = "okay";
-
- vmmc-supply = <&pm8916_l8>;
- vqmmc-supply = <&pm8916_l5>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
- };
-
- sdhci@7864000 {
- status = "okay";
-
- vmmc-supply = <&pm8916_l11>;
- vqmmc-supply = <&pm8916_l12>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
-
- cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
- };
-
- serial@78b0000 {
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_uart2_default>;
- pinctrl-1 = <&blsp1_uart2_sleep>;
- };
-
- usb@78d9000 {
- status = "okay";
- extcon = <&muic>, <&muic>;
-
- hnp-disable;
- srp-disable;
- adp-disable;
-
- ulpi {
- phy {
- extcon = <&muic>;
- v1p8-supply = <&pm8916_l7>;
- v3p3-supply = <&pm8916_l13>;
- };
- };
- };
-
- mdss@1a00000 {
- dsi@1a98000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdda-supply = <&pm8916_l2>;
- vddio-supply = <&pm8916_l6>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&mdss_default>;
- pinctrl-1 = <&mdss_sleep>;
- };
-
- dsi-phy@1a98300 {
- vddio-supply = <&pm8916_l6>;
- };
- };
-
- wcnss@a21b000 {
- status = "okay";
- };
- };
-
gpio-keys {
compatible = "gpio-keys";
@@ -154,7 +81,7 @@ i2c-muic {
#address-cells = <1>;
#size-cells = <0>;
- muic: sm5502@25 {
+ muic: extcon@25 {
compatible = "siliconmitus,sm5502-muic";
reg = <0x25>;
@@ -186,17 +113,50 @@ magnetometer@12 {
};
};
-&spmi_bus {
- pm8916@0 {
- pon@800 {
- volume-down {
- compatible = "qcom,pm8941-resin";
- interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
- bias-pull-up;
- linux,code = <KEY_VOLUMEDOWN>;
- };
- };
- };
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&dsi0 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mdss_default>;
+ pinctrl-1 = <&mdss_sleep>;
+};
+
+&pm8916_resin {
+ status = "okay";
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pronto {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+ cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+};
+
+&usb {
+ status = "okay";
+ extcon = <&muic>, <&muic>;
+};
+
+&usb_hs_phy {
+ extcon = <&muic>;
};
&smd_rpm_regulators {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
index 410c7d1..086f07e 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -44,15 +44,11 @@ panel_in: endpoint {
};
};
};
+};
- ports {
- port@1 {
- dsi0_out: endpoint {
- remote-endpoint = <&panel_in>;
- data-lanes = <0 1>;
- };
- };
- };
+&dsi0_out {
+ data-lanes = <0 1>;
+ remote-endpoint = <&panel_in>;
};
&msmgpio {
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 67cae5f..aaa2189 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -4,11 +4,11 @@
*/
#include <dt-bindings/arm/coresight-cti-dt.h>
+#include <dt-bindings/clock/qcom,gcc-msm8916.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/interconnect/qcom,msm8916.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-msm8916.h>
#include <dt-bindings/reset/qcom,gcc-msm8916.h>
-#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/thermal/thermal.h>
/ {
@@ -94,6 +94,20 @@ mba_mem: mba@8ea00000 {
};
};
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -151,8 +165,8 @@ CPU3: cpu@3 {
};
L2_0: l2-cache {
- compatible = "cache";
- cache-level = <2>;
+ compatible = "cache";
+ cache-level = <2>;
};
idle-states {
@@ -189,6 +203,42 @@ CLUSTER_PWRDN: cluster-gdhs {
};
};
+ cpu_opp_table: cpu-opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ };
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ };
+ opp-998400000 {
+ opp-hz = /bits/ 64 <998400000>;
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-msm8916", "qcom,scm";
+ clocks = <&gcc GCC_CRYPTO_CLK>,
+ <&gcc GCC_CRYPTO_AXI_CLK>,
+ <&gcc GCC_CRYPTO_AHB_CLK>;
+ clock-names = "core", "bus", "iface";
+ #reset-cells = <1>;
+
+ qcom,dload-mode = <&tcsr 0x6100>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -223,20 +273,1532 @@ CLUSTER_PD: power-domain-cluster {
};
};
- pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
+ smd {
+ compatible = "qcom,smd";
+
+ rpm {
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8916";
+ qcom,smd-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-msm8916";
+ #clock-cells = <1>;
+ };
+ };
+ };
+ };
+
+ smem {
+ compatible = "qcom,smem";
+
+ memory-region = <&smem_mem>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ smp2p-hexagon {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+
+ interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 14>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ hexagon_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+
+ #qcom,smem-state-cells = <1>;
+ };
+
+ hexagon_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-wcnss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <451>, <431>;
+
+ interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 18>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <4>;
+
+ wcnss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+
+ #qcom,smem-state-cells = <1>;
+ };
+
+ wcnss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smsm {
+ compatible = "qcom,smsm";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ qcom,ipc-1 = <&apcs 8 13>;
+ qcom,ipc-3 = <&apcs 8 19>;
+
+ apps_smsm: apps@0 {
+ reg = <0>;
+
+ #qcom,smem-state-cells = <1>;
+ };
+
+ hexagon_smsm: hexagon@1 {
+ reg = <1>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ wcnss_smsm: wcnss@6 {
+ reg = <6>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ soc: soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ rng@22000 {
+ compatible = "qcom,prng";
+ reg = <0x00022000 0x200>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
+
+ restart@4ab000 {
+ compatible = "qcom,pshold";
+ reg = <0x004ab000 0x4>;
+ };
+
+ qfprom: qfprom@5c000 {
+ compatible = "qcom,qfprom";
+ reg = <0x0005c000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ tsens_caldata: caldata@d0 {
+ reg = <0xd0 0x8>;
+ };
+ tsens_calsel: calsel@ec {
+ reg = <0xec 0x4>;
+ };
+ };
+
+ rpm_msg_ram: memory@60000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0x00060000 0x8000>;
+ };
+
+ bimc: interconnect@400000 {
+ compatible = "qcom,msm8916-bimc";
+ reg = <0x00400000 0x62000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
+ };
+
+ tsens: thermal-sensor@4a9000 {
+ compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
+ reg = <0x004a9000 0x1000>, /* TM */
+ <0x004a8000 0x1000>; /* SROT */
+ nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
+ nvmem-cell-names = "calib", "calib_sel";
+ #qcom,sensors = <5>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
+ #thermal-sensor-cells = <1>;
+ };
+
+ pcnoc: interconnect@500000 {
+ compatible = "qcom,msm8916-pcnoc";
+ reg = <0x00500000 0x11000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
+ <&rpmcc RPM_SMD_PCNOC_A_CLK>;
+ };
+
+ snoc: interconnect@580000 {
+ compatible = "qcom,msm8916-snoc";
+ reg = <0x00580000 0x14000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ };
+
+ /* System CTIs */
+ /* CTI 0 - TMC connections */
+ cti0: cti@810000 {
+ compatible = "arm,coresight-cti", "arm,primecell";
+ reg = <0x00810000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ status = "disabled";
+ };
+
+ /* CTI 1 - TPIU connections */
+ cti1: cti@811000 {
+ compatible = "arm,coresight-cti", "arm,primecell";
+ reg = <0x00811000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ status = "disabled";
+ };
+
+ /* CTIs 2-11 - no information - not instantiated */
+
+ tpiu: tpiu@820000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0x00820000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
+ };
+ };
+ };
+
+ funnel0: funnel@821000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x00821000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Not described input ports:
+ * 0 - connected to Resource and Power Manger CPU ETM
+ * 1 - not-connected
+ * 2 - connected to Modem CPU ETM
+ * 3 - not-connected
+ * 5 - not-connected
+ * 6 - connected trought funnel to Wireless CPU ETM
+ * 7 - connected to STM component
+ */
+
+ port@4 {
+ reg = <4>;
+ funnel0_in4: endpoint {
+ remote-endpoint = <&funnel1_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ funnel0_out: endpoint {
+ remote-endpoint = <&etf_in>;
+ };
+ };
+ };
+ };
+
+ replicator: replicator@824000 {
+ compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+ reg = <0x00824000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ replicator_out0: endpoint {
+ remote-endpoint = <&etr_in>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ replicator_out1: endpoint {
+ remote-endpoint = <&tpiu_in>;
+ };
+ };
+ };
+
+ in-ports {
+ port {
+ replicator_in: endpoint {
+ remote-endpoint = <&etf_out>;
+ };
+ };
+ };
+ };
+
+ etf: etf@825000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x00825000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ in-ports {
+ port {
+ etf_in: endpoint {
+ remote-endpoint = <&funnel0_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ etf_out: endpoint {
+ remote-endpoint = <&replicator_in>;
+ };
+ };
+ };
+ };
+
+ etr: etr@826000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x00826000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ in-ports {
+ port {
+ etr_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
+ };
+ };
+ };
+
+ funnel1: funnel@841000 { /* APSS funnel only 4 inputs are used */
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x00841000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ funnel1_in0: endpoint {
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ funnel1_in1: endpoint {
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ funnel1_in2: endpoint {
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+ port@3 {
+ reg = <3>;
+ funnel1_in3: endpoint {
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ funnel1_out: endpoint {
+ remote-endpoint = <&funnel0_in4>;
+ };
+ };
+ };
+ };
+
+ debug0: debug@850000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x00850000 0x1000>;
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+ cpu = <&CPU0>;
+ status = "disabled";
+ };
+
+ debug1: debug@852000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x00852000 0x1000>;
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+ cpu = <&CPU1>;
+ status = "disabled";
+ };
+
+ debug2: debug@854000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x00854000 0x1000>;
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+ cpu = <&CPU2>;
+ status = "disabled";
+ };
+
+ debug3: debug@856000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x00856000 0x1000>;
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+ cpu = <&CPU3>;
+ status = "disabled";
+ };
+
+ /* Core CTIs; CTIs 12-15 */
+ /* CTI - CPU-0 */
+ cti12: cti@858000 {
+ compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+ "arm,primecell";
+ reg = <0x00858000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU0>;
+ arm,cs-dev-assoc = <&etm0>;
+
+ status = "disabled";
+ };
+
+ /* CTI - CPU-1 */
+ cti13: cti@859000 {
+ compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+ "arm,primecell";
+ reg = <0x00859000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU1>;
+ arm,cs-dev-assoc = <&etm1>;
+
+ status = "disabled";
+ };
+
+ /* CTI - CPU-2 */
+ cti14: cti@85a000 {
+ compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+ "arm,primecell";
+ reg = <0x0085a000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU2>;
+ arm,cs-dev-assoc = <&etm2>;
+
+ status = "disabled";
+ };
+
+ /* CTI - CPU-3 */
+ cti15: cti@85b000 {
+ compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+ "arm,primecell";
+ reg = <0x0085b000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU3>;
+ arm,cs-dev-assoc = <&etm3>;
+
+ status = "disabled";
+ };
+
+ etm0: etm@85c000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x0085c000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+ arm,coresight-loses-context-with-cpu;
+
+ cpu = <&CPU0>;
+
+ status = "disabled";
+
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel1_in0>;
+ };
+ };
+ };
+ };
+
+ etm1: etm@85d000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x0085d000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+ arm,coresight-loses-context-with-cpu;
+
+ cpu = <&CPU1>;
+
+ status = "disabled";
+
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel1_in1>;
+ };
+ };
+ };
+ };
+
+ etm2: etm@85e000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x0085e000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+ arm,coresight-loses-context-with-cpu;
+
+ cpu = <&CPU2>;
+
+ status = "disabled";
+
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel1_in2>;
+ };
+ };
+ };
+ };
+
+ etm3: etm@85f000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x0085f000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+ arm,coresight-loses-context-with-cpu;
+
+ cpu = <&CPU3>;
+
+ status = "disabled";
+
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel1_in3>;
+ };
+ };
+ };
+ };
+
+ msmgpio: pinctrl@1000000 {
+ compatible = "qcom,msm8916-pinctrl";
+ reg = <0x01000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&msmgpio 0 0 122>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gcc: clock-controller@1800000 {
+ compatible = "qcom,gcc-msm8916";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x01800000 0x80000>;
+ };
+
+ tcsr_mutex: hwlock@1905000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x01905000 0x20000>;
+ #hwlock-cells = <1>;
+ };
+
+ tcsr: syscon@1937000 {
+ compatible = "qcom,tcsr-msm8916", "syscon";
+ reg = <0x01937000 0x30000>;
+ };
+
+ mdss: mdss@1a00000 {
+ compatible = "qcom,mdss";
+ reg = <0x01a00000 0x1000>,
+ <0x01ac8000 0x3000>;
+ reg-names = "mdss_phys", "vbif_phys";
+
+ power-domains = <&gcc MDSS_GDSC>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "vsync";
+
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mdp: mdp@1a01000 {
+ compatible = "qcom,mdp5";
+ reg = <0x01a01000 0x89000>;
+ reg-names = "mdp_phys";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core",
+ "vsync";
+
+ iommus = <&apps_iommu 4>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdp5_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+
+ dsi0: dsi@1a98000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x01a98000 0x25c>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+ <&gcc PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi_phy0 0>,
+ <&dsi_phy0 1>;
+
+ clocks = <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_BYTE0_CLK>,
+ <&gcc GCC_MDSS_PCLK0_CLK>,
+ <&gcc GCC_MDSS_ESC0_CLK>;
+ clock-names = "mdp_core",
+ "iface",
+ "bus",
+ "byte",
+ "pixel",
+ "core";
+ phys = <&dsi_phy0>;
+ phy-names = "dsi-phy";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&mdp5_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi_phy0: dsi-phy@1a98300 {
+ compatible = "qcom,dsi-phy-28nm-lp";
+ reg = <0x01a98300 0xd4>,
+ <0x01a98500 0x280>,
+ <0x01a98780 0x30>;
+ reg-names = "dsi_pll",
+ "dsi_phy",
+ "dsi_phy_regulator";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "ref";
+ };
+ };
+
+ camss: camss@1b00000 {
+ compatible = "qcom,msm8916-camss";
+ reg = <0x01b0ac00 0x200>,
+ <0x01b00030 0x4>,
+ <0x01b0b000 0x200>,
+ <0x01b00038 0x4>,
+ <0x01b08000 0x100>,
+ <0x01b08400 0x100>,
+ <0x01b0a000 0x500>,
+ <0x01b00020 0x10>,
+ <0x01b10000 0x1000>;
+ reg-names = "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csid0",
+ "csid1",
+ "ispif",
+ "csi_clk_mux",
+ "vfe0";
+ interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csid0",
+ "csid1",
+ "ispif",
+ "vfe0";
+ power-domains = <&gcc VFE_GDSC>;
+ clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+ <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI0PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI0RDI_CLK>,
+ <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI1_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI1PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI1RDI_CLK>,
+ <&gcc GCC_CAMSS_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE0_CLK>,
+ <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+ <&gcc GCC_CAMSS_VFE_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE_AXI_CLK>;
+ clock-names = "top_ahb",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "ahb",
+ "vfe0",
+ "csi_vfe0",
+ "vfe_ahb",
+ "vfe_axi";
+ iommus = <&apps_iommu 3>;
+ status = "disabled";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci: cci@1b0c000 {
+ compatible = "qcom,msm8916-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x01b0c000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+ <&gcc GCC_CAMSS_CCI_AHB_CLK>,
+ <&gcc GCC_CAMSS_CCI_CLK>,
+ <&gcc GCC_CAMSS_AHB_CLK>;
+ clock-names = "camss_top_ahb", "cci_ahb",
+ "cci", "camss_ahb";
+ assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>,
+ <&gcc GCC_CAMSS_CCI_CLK>;
+ assigned-clock-rates = <80000000>, <19200000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cci0_default>;
+ status = "disabled";
+
+ cci_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ gpu@1c00000 {
+ compatible = "qcom,adreno-306.0", "qcom,adreno";
+ reg = <0x01c00000 0x20000>;
+ reg-names = "kgsl_3d0_reg_memory";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "kgsl_3d0_irq";
+ clock-names =
+ "core",
+ "iface",
+ "mem",
+ "mem_iface",
+ "alt_mem_iface",
+ "gfx3d";
+ clocks =
+ <&gcc GCC_OXILI_GFX3D_CLK>,
+ <&gcc GCC_OXILI_AHB_CLK>,
+ <&gcc GCC_OXILI_GMEM_CLK>,
+ <&gcc GCC_BIMC_GFX_CLK>,
+ <&gcc GCC_BIMC_GPU_CLK>,
+ <&gcc GFX3D_CLK_SRC>;
+ power-domains = <&gcc OXILI_GDSC>;
+ operating-points-v2 = <&gpu_opp_table>;
+ iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ };
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ };
+ };
+ };
+
+ venus: video-codec@1d00000 {
+ compatible = "qcom,msm8916-venus";
+ reg = <0x01d00000 0xff000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&gcc VENUS_GDSC>;
+ clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
+ <&gcc GCC_VENUS0_AHB_CLK>,
+ <&gcc GCC_VENUS0_AXI_CLK>;
+ clock-names = "core", "iface", "bus";
+ iommus = <&apps_iommu 5>;
+ memory-region = <&venus_mem>;
+ status = "okay";
+
+ video-decoder {
+ compatible = "venus-decoder";
+ };
+
+ video-encoder {
+ compatible = "venus-encoder";
+ };
+ };
+
+ apps_iommu: iommu@1ef0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #iommu-cells = <1>;
+ compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+ ranges = <0 0x01e20000 0x40000>;
+ reg = <0x01ef0000 0x3000>;
+ clocks = <&gcc GCC_SMMU_CFG_CLK>,
+ <&gcc GCC_APSS_TCU_CLK>;
+ clock-names = "iface", "bus";
+ qcom,iommu-secure-id = <17>;
+
+ // vfe:
+ iommu-ctx@3000 {
+ compatible = "qcom,msm-iommu-v1-sec";
+ reg = <0x3000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ // mdp_0:
+ iommu-ctx@4000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x4000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ // venus_ns:
+ iommu-ctx@5000 {
+ compatible = "qcom,msm-iommu-v1-sec";
+ reg = <0x5000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpu_iommu: iommu@1f08000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #iommu-cells = <1>;
+ compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+ ranges = <0 0x01f08000 0x10000>;
+ clocks = <&gcc GCC_SMMU_CFG_CLK>,
+ <&gcc GCC_GFX_TCU_CLK>;
+ clock-names = "iface", "bus";
+ qcom,iommu-secure-id = <18>;
+
+ // gfx3d_user:
+ iommu-ctx@1000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x1000 0x1000>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ // gfx3d_priv:
+ iommu-ctx@2000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x2000 0x1000>;
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ spmi_bus: spmi@200f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x0200f000 0x001000>,
+ <0x02400000 0x400000>,
+ <0x02c00000 0x400000>,
+ <0x03800000 0x200000>,
+ <0x0200a000 0x002100>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
+ mpss: remoteproc@4080000 {
+ compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil";
+ reg = <0x04080000 0x100>,
+ <0x04020000 0x040>;
+
+ reg-names = "qdsp6", "rmb";
+
+ interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+ <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "bus", "mem", "xo";
+
+ qcom,smem-states = <&hexagon_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ resets = <&scm 0>;
+ reset-names = "mss_restart";
+
+ qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
+
+ status = "disabled";
+
+ mba {
+ memory-region = <&mba_mem>;
+ };
+
+ mpss {
+ memory-region = <&mpss_mem>;
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,smd-edge = <0>;
+ qcom,ipc = <&apcs 8 12>;
+ qcom,remote-pid = <1>;
+
+ label = "hexagon";
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,smd-channels = "fastrpcsmd-apps-dsp";
+ label = "adsp";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ };
+ };
+ };
+ };
+
+ sound: sound@7702000 {
+ status = "disabled";
+ compatible = "qcom,apq8016-sbc-sndcard";
+ reg = <0x07702000 0x4>, <0x07702004 0x4>;
+ reg-names = "mic-iomux", "spkr-iomux";
+ };
+
+ lpass: audio-controller@7708000 {
+ status = "disabled";
+ compatible = "qcom,lpass-cpu-apq8016";
+ clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+ <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
+ <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>,
+ <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
+ <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
+ <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
+ <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>;
+
+ clock-names = "ahbix-clk",
+ "pcnoc-mport-clk",
+ "pcnoc-sway-clk",
+ "mi2s-bit-clk0",
+ "mi2s-bit-clk1",
+ "mi2s-bit-clk2",
+ "mi2s-bit-clk3";
+ #sound-dai-cells = <1>;
+
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "lpass-irq-lpaif";
+ reg = <0x07708000 0x10000>;
+ reg-names = "lpass-lpaif";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ lpass_codec: audio-codec@771c000 {
+ compatible = "qcom,msm8916-wcd-digital-codec";
+ reg = <0x0771c000 0x400>;
+ clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+ <&gcc GCC_CODEC_DIGCODEC_CLK>;
+ clock-names = "ahbix-clk", "mclk";
+ #sound-dai-cells = <1>;
+ };
+
+ sdhc_1: sdhci@7824000 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x07824900 0x11c>, <0x07824000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+ <&gcc GCC_SDCC1_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "core", "iface", "xo";
+ mmc-ddr-1_8v;
+ bus-width = <8>;
+ non-removable;
+ status = "disabled";
+ };
+
+ sdhc_2: sdhci@7864000 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x07864900 0x11c>, <0x07864000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+ <&gcc GCC_SDCC2_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "core", "iface", "xo";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ blsp_dma: dma@7884000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x07884000 0x23000>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ status = "disabled";
+ };
+
+ blsp1_uart1: serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078af000 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 1>, <&blsp_dma 0>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_uart1_default>;
+ pinctrl-1 = <&blsp1_uart1_sleep>;
+ status = "disabled";
+ };
+
+ blsp1_uart2: serial@78b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078b0000 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 3>, <&blsp_dma 2>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_uart2_default>;
+ pinctrl-1 = <&blsp1_uart2_sleep>;
+ status = "disabled";
+ };
+
+ blsp_i2c1: i2c@78b5000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b5000 0x500>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c1_default>;
+ pinctrl-1 = <&i2c1_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi1: spi@78b5000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b5000 0x500>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 5>, <&blsp_dma 4>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi1_default>;
+ pinctrl-1 = <&spi1_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c2: i2c@78b6000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b6000 0x500>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_default>;
+ pinctrl-1 = <&i2c2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi2: spi@78b6000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b6000 0x500>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 7>, <&blsp_dma 6>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi2_default>;
+ pinctrl-1 = <&spi2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi3: spi@78b7000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b7000 0x500>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 9>, <&blsp_dma 8>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi3_default>;
+ pinctrl-1 = <&spi3_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c4: i2c@78b8000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b8000 0x500>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c4_default>;
+ pinctrl-1 = <&i2c4_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi4: spi@78b8000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b8000 0x500>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 11>, <&blsp_dma 10>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi4_default>;
+ pinctrl-1 = <&spi4_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c5: i2c@78b9000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b9000 0x500>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c5_default>;
+ pinctrl-1 = <&i2c5_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi5: spi@78b9000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b9000 0x500>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 13>, <&blsp_dma 12>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi5_default>;
+ pinctrl-1 = <&spi5_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c6: i2c@78ba000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078ba000 0x500>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c6_default>;
+ pinctrl-1 = <&i2c6_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi6: spi@78ba000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078ba000 0x500>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 15>, <&blsp_dma 14>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi6_default>;
+ pinctrl-1 = <&spi6_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ usb: usb@78d9000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0x078d9000 0x200>,
+ <0x078d9200 0x200>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+ <&gcc GCC_USB_HS_SYSTEM_CLK>;
+ clock-names = "iface", "core";
+ assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+ assigned-clock-rates = <80000000>;
+ resets = <&gcc GCC_USB_HS_BCR>;
+ reset-names = "core";
+ phy_type = "ulpi";
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ ahb-burst-config = <0>;
+ phy-names = "usb-phy";
+ phys = <&usb_hs_phy>;
+ status = "disabled";
+ #reset-cells = <1>;
+
+ ulpi {
+ usb_hs_phy: phy {
+ compatible = "qcom,usb-hs-phy-msm8916",
+ "qcom,usb-hs-phy";
+ #phy-cells = <0>;
+ clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+ clock-names = "ref", "sleep";
+ resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
+ reset-names = "phy", "por";
+ qcom,init-seq = /bits/ 8 <0x0 0x44
+ 0x1 0x6b 0x2 0x24 0x3 0x13>;
+ };
+ };
+ };
+
+ pronto: remoteproc@a21b000 {
+ compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+ reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
+ reg-names = "ccu", "dxe", "pmu";
+
+ memory-region = <&wcnss_mem>;
+
+ interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ qcom,state = <&wcnss_smp2p_out 0>;
+ qcom,state-names = "stop";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wcnss_pin_a>;
+
+ status = "disabled";
+
+ iris {
+ compatible = "qcom,wcn3620";
+
+ clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+ clock-names = "xo";
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 17>;
+ qcom,smd-edge = <6>;
+ qcom,remote-pid = <4>;
+
+ label = "pronto";
+
+ wcnss {
+ compatible = "qcom,wcnss";
+ qcom,smd-channels = "WCNSS_CTRL";
+
+ qcom,mmio = <&pronto>;
+
+ bt {
+ compatible = "qcom,wcnss-bt";
+ };
+
+ wifi {
+ compatible = "qcom,wcnss-wlan";
+
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+ qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+ };
+ };
+ };
+ };
+
+ intc: interrupt-controller@b000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
+ };
+
+ apcs: mailbox@b011000 {
+ compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
+ reg = <0x0b011000 0x1000>;
+ #mbox-cells = <1>;
+ clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
+ clock-names = "pll", "aux";
+ #clock-cells = <0>;
+ };
+
+ a53pll: clock@b016000 {
+ compatible = "qcom,msm8916-a53pll";
+ reg = <0x0b016000 0x40>;
+ #clock-cells = <0>;
+ };
+
+ timer@b020000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0b020000 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@b021000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b021000 0x1000>,
+ <0x0b022000 0x1000>;
+ };
+
+ frame@b023000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b023000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b024000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b024000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b025000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b025000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b026000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b026000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b027000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b027000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b028000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b028000 0x1000>;
+ status = "disabled";
+ };
+ };
};
thermal-zones {
- cpu0_1-thermal {
+ cpu0-1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 5>;
trips {
- cpu0_1_alert0: trip-point@0 {
+ cpu0_1_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
@@ -259,7 +1821,7 @@ map0 {
};
};
- cpu2_3-thermal {
+ cpu2-3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
@@ -341,24 +1903,6 @@ modem_alert0: trip-point0 {
};
- cpu_opp_table: cpu-opp-table {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp-200000000 {
- opp-hz = /bits/ 64 <200000000>;
- };
- opp-400000000 {
- opp-hz = /bits/ 64 <400000000>;
- };
- opp-800000000 {
- opp-hz = /bits/ 64 <800000000>;
- };
- opp-998400000 {
- opp-hz = /bits/ 64 <998400000>;
- };
- };
-
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -366,1574 +1910,6 @@ timer {
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
-
- clocks {
- xo_board: xo-board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
- };
-
- sleep_clk: sleep-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
-
- smem {
- compatible = "qcom,smem";
-
- memory-region = <&smem_mem>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
-
- hwlocks = <&tcsr_mutex 3>;
- };
-
- firmware {
- scm: scm {
- compatible = "qcom,scm";
- clocks = <&gcc GCC_CRYPTO_CLK>, <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>;
- clock-names = "core", "bus", "iface";
- #reset-cells = <1>;
-
- qcom,dload-mode = <&tcsr 0x6100>;
- };
- };
-
- soc: soc {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0xffffffff>;
- compatible = "simple-bus";
-
- bimc: interconnect@400000 {
- compatible = "qcom,msm8916-bimc";
- reg = <0x00400000 0x62000>;
- #interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
- <&rpmcc RPM_SMD_BIMC_A_CLK>;
- };
-
- restart@4ab000 {
- compatible = "qcom,pshold";
- reg = <0x4ab000 0x4>;
- };
-
- pcnoc: interconnect@500000 {
- compatible = "qcom,msm8916-pcnoc";
- reg = <0x00500000 0x11000>;
- #interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
- <&rpmcc RPM_SMD_PCNOC_A_CLK>;
- };
-
- snoc: interconnect@580000 {
- compatible = "qcom,msm8916-snoc";
- reg = <0x00580000 0x14000>;
- #interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
- <&rpmcc RPM_SMD_SNOC_A_CLK>;
- };
-
- msmgpio: pinctrl@1000000 {
- compatible = "qcom,msm8916-pinctrl";
- reg = <0x1000000 0x300000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- gpio-ranges = <&msmgpio 0 0 122>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gcc: clock-controller@1800000 {
- compatible = "qcom,gcc-msm8916";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0x1800000 0x80000>;
- };
-
- tcsr_mutex_regs: syscon@1905000 {
- compatible = "syscon";
- reg = <0x1905000 0x20000>;
- };
-
- tcsr: syscon@1937000 {
- compatible = "qcom,tcsr-msm8916", "syscon";
- reg = <0x1937000 0x30000>;
- };
-
- tcsr_mutex: hwlock {
- compatible = "qcom,tcsr-mutex";
- syscon = <&tcsr_mutex_regs 0 0x1000>;
- #hwlock-cells = <1>;
- };
-
- rpm_msg_ram: memory@60000 {
- compatible = "qcom,rpm-msg-ram";
- reg = <0x60000 0x8000>;
- };
-
- blsp1_uart1: serial@78af000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x78af000 0x200>;
- interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 1>, <&blsp_dma 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- a53pll: clock@b016000 {
- compatible = "qcom,msm8916-a53pll";
- reg = <0xb016000 0x40>;
- #clock-cells = <0>;
- };
-
- apcs: mailbox@b011000 {
- compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
- reg = <0xb011000 0x1000>;
- #mbox-cells = <1>;
- clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
- clock-names = "pll", "aux";
- #clock-cells = <0>;
- };
-
- blsp1_uart2: serial@78b0000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x78b0000 0x200>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 3>, <&blsp_dma 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- blsp_dma: dma@7884000 {
- compatible = "qcom,bam-v1.7.0";
- reg = <0x07884000 0x23000>;
- interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "bam_clk";
- #dma-cells = <1>;
- qcom,ee = <0>;
- status = "disabled";
- };
-
- blsp_spi1: spi@78b5000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078b5000 0x500>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 5>, <&blsp_dma 4>;
- dma-names = "rx", "tx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&spi1_default>;
- pinctrl-1 = <&spi1_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_spi2: spi@78b6000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078b6000 0x500>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 7>, <&blsp_dma 6>;
- dma-names = "rx", "tx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&spi2_default>;
- pinctrl-1 = <&spi2_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_spi3: spi@78b7000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078b7000 0x500>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 9>, <&blsp_dma 8>;
- dma-names = "rx", "tx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&spi3_default>;
- pinctrl-1 = <&spi3_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_spi4: spi@78b8000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078b8000 0x500>;
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 11>, <&blsp_dma 10>;
- dma-names = "rx", "tx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&spi4_default>;
- pinctrl-1 = <&spi4_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_spi5: spi@78b9000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078b9000 0x500>;
- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 13>, <&blsp_dma 12>;
- dma-names = "rx", "tx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&spi5_default>;
- pinctrl-1 = <&spi5_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_spi6: spi@78ba000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078ba000 0x500>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 15>, <&blsp_dma 14>;
- dma-names = "rx", "tx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&spi6_default>;
- pinctrl-1 = <&spi6_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_i2c1: i2c@78b5000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078b5000 0x500>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c1_default>;
- pinctrl-1 = <&i2c1_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_i2c2: i2c@78b6000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078b6000 0x500>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c2_default>;
- pinctrl-1 = <&i2c2_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_i2c4: i2c@78b8000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078b8000 0x500>;
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c4_default>;
- pinctrl-1 = <&i2c4_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_i2c5: i2c@78b9000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078b9000 0x500>;
- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c5_default>;
- pinctrl-1 = <&i2c5_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_i2c6: i2c@78ba000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078ba000 0x500>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c6_default>;
- pinctrl-1 = <&i2c6_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- lpass: lpass@7708000 {
- status = "disabled";
- compatible = "qcom,lpass-cpu-apq8016";
- clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
- <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
- <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>,
- <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
- <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
- <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
- <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>;
-
- clock-names = "ahbix-clk",
- "pcnoc-mport-clk",
- "pcnoc-sway-clk",
- "mi2s-bit-clk0",
- "mi2s-bit-clk1",
- "mi2s-bit-clk2",
- "mi2s-bit-clk3";
- #sound-dai-cells = <1>;
-
- interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "lpass-irq-lpaif";
- reg = <0x07708000 0x10000>;
- reg-names = "lpass-lpaif";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- lpass_codec: codec{
- compatible = "qcom,msm8916-wcd-digital-codec";
- reg = <0x0771c000 0x400>;
- clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
- <&gcc GCC_CODEC_DIGCODEC_CLK>;
- clock-names = "ahbix-clk", "mclk";
- #sound-dai-cells = <1>;
- };
-
- sdhc_1: sdhci@7824000 {
- compatible = "qcom,sdhci-msm-v4";
- reg = <0x07824900 0x11c>, <0x07824000 0x800>;
- reg-names = "hc_mem", "core_mem";
-
- interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>, <0 138 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC1_APPS_CLK>,
- <&gcc GCC_SDCC1_AHB_CLK>,
- <&xo_board>;
- clock-names = "core", "iface", "xo";
- mmc-ddr-1_8v;
- bus-width = <8>;
- non-removable;
- status = "disabled";
- };
-
- sdhc_2: sdhci@7864000 {
- compatible = "qcom,sdhci-msm-v4";
- reg = <0x07864900 0x11c>, <0x07864000 0x800>;
- reg-names = "hc_mem", "core_mem";
-
- interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, <0 221 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC2_APPS_CLK>,
- <&gcc GCC_SDCC2_AHB_CLK>,
- <&xo_board>;
- clock-names = "core", "iface", "xo";
- bus-width = <4>;
- status = "disabled";
- };
-
- otg: usb@78d9000 {
- compatible = "qcom,ci-hdrc";
- reg = <0x78d9000 0x200>,
- <0x78d9200 0x200>;
- interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_USB_HS_AHB_CLK>,
- <&gcc GCC_USB_HS_SYSTEM_CLK>;
- clock-names = "iface", "core";
- assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
- assigned-clock-rates = <80000000>;
- resets = <&gcc GCC_USB_HS_BCR>;
- reset-names = "core";
- phy_type = "ulpi";
- dr_mode = "otg";
- ahb-burst-config = <0>;
- phy-names = "usb-phy";
- phys = <&usb_hs_phy>;
- status = "disabled";
- #reset-cells = <1>;
-
- ulpi {
- usb_hs_phy: phy {
- compatible = "qcom,usb-hs-phy-msm8916",
- "qcom,usb-hs-phy";
- #phy-cells = <0>;
- clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
- clock-names = "ref", "sleep";
- resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
- reset-names = "phy", "por";
- qcom,init-seq = /bits/ 8 <0x0 0x44
- 0x1 0x6b 0x2 0x24 0x3 0x13>;
- };
- };
- };
-
- intc: interrupt-controller@b000000 {
- compatible = "qcom,msm-qgic2";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
- };
-
- timer@b020000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- compatible = "arm,armv7-timer-mem";
- reg = <0xb020000 0x1000>;
- clock-frequency = <19200000>;
-
- frame@b021000 {
- frame-number = <0>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb021000 0x1000>,
- <0xb022000 0x1000>;
- };
-
- frame@b023000 {
- frame-number = <1>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb023000 0x1000>;
- status = "disabled";
- };
-
- frame@b024000 {
- frame-number = <2>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb024000 0x1000>;
- status = "disabled";
- };
-
- frame@b025000 {
- frame-number = <3>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb025000 0x1000>;
- status = "disabled";
- };
-
- frame@b026000 {
- frame-number = <4>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb026000 0x1000>;
- status = "disabled";
- };
-
- frame@b027000 {
- frame-number = <5>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb027000 0x1000>;
- status = "disabled";
- };
-
- frame@b028000 {
- frame-number = <6>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb028000 0x1000>;
- status = "disabled";
- };
- };
-
- spmi_bus: spmi@200f000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0x200f000 0x001000>,
- <0x2400000 0x400000>,
- <0x2c00000 0x400000>,
- <0x3800000 0x200000>,
- <0x200a000 0x002100>;
- reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
- interrupt-names = "periph_irq";
- interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
- qcom,ee = <0>;
- qcom,channel = <0>;
- #address-cells = <2>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <4>;
- };
-
- rng@22000 {
- compatible = "qcom,prng";
- reg = <0x00022000 0x200>;
- clocks = <&gcc GCC_PRNG_AHB_CLK>;
- clock-names = "core";
- };
-
- qfprom: qfprom@5c000 {
- compatible = "qcom,qfprom";
- reg = <0x5c000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- tsens_caldata: caldata@d0 {
- reg = <0xd0 0x8>;
- };
- tsens_calsel: calsel@ec {
- reg = <0xec 0x4>;
- };
- };
-
- tsens: thermal-sensor@4a9000 {
- compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
- reg = <0x4a9000 0x1000>, /* TM */
- <0x4a8000 0x1000>; /* SROT */
- nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
- nvmem-cell-names = "calib", "calib_sel";
- #qcom,sensors = <5>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow";
- #thermal-sensor-cells = <1>;
- };
-
- apps_iommu: iommu@1ef0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- #iommu-cells = <1>;
- compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
- ranges = <0 0x1e20000 0x40000>;
- reg = <0x1ef0000 0x3000>;
- clocks = <&gcc GCC_SMMU_CFG_CLK>,
- <&gcc GCC_APSS_TCU_CLK>;
- clock-names = "iface", "bus";
- qcom,iommu-secure-id = <17>;
-
- // vfe:
- iommu-ctx@3000 {
- compatible = "qcom,msm-iommu-v1-sec";
- reg = <0x3000 0x1000>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- // mdp_0:
- iommu-ctx@4000 {
- compatible = "qcom,msm-iommu-v1-ns";
- reg = <0x4000 0x1000>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- // venus_ns:
- iommu-ctx@5000 {
- compatible = "qcom,msm-iommu-v1-sec";
- reg = <0x5000 0x1000>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- gpu_iommu: iommu@1f08000 {
- #address-cells = <1>;
- #size-cells = <1>;
- #iommu-cells = <1>;
- compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
- ranges = <0 0x1f08000 0x10000>;
- clocks = <&gcc GCC_SMMU_CFG_CLK>,
- <&gcc GCC_GFX_TCU_CLK>;
- clock-names = "iface", "bus";
- qcom,iommu-secure-id = <18>;
-
- // gfx3d_user:
- iommu-ctx@1000 {
- compatible = "qcom,msm-iommu-v1-ns";
- reg = <0x1000 0x1000>;
- interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- // gfx3d_priv:
- iommu-ctx@2000 {
- compatible = "qcom,msm-iommu-v1-ns";
- reg = <0x2000 0x1000>;
- interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- gpu@1c00000 {
- compatible = "qcom,adreno-306.0", "qcom,adreno";
- reg = <0x01c00000 0x20000>;
- reg-names = "kgsl_3d0_reg_memory";
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "kgsl_3d0_irq";
- clock-names =
- "core",
- "iface",
- "mem",
- "mem_iface",
- "alt_mem_iface",
- "gfx3d";
- clocks =
- <&gcc GCC_OXILI_GFX3D_CLK>,
- <&gcc GCC_OXILI_AHB_CLK>,
- <&gcc GCC_OXILI_GMEM_CLK>,
- <&gcc GCC_BIMC_GFX_CLK>,
- <&gcc GCC_BIMC_GPU_CLK>,
- <&gcc GFX3D_CLK_SRC>;
- power-domains = <&gcc OXILI_GDSC>;
- operating-points-v2 = <&gpu_opp_table>;
- iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
-
- gpu_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-400000000 {
- opp-hz = /bits/ 64 <400000000>;
- };
- opp-19200000 {
- opp-hz = /bits/ 64 <19200000>;
- };
- };
- };
-
- mdss: mdss@1a00000 {
- compatible = "qcom,mdss";
- reg = <0x1a00000 0x1000>,
- <0x1ac8000 0x3000>;
- reg-names = "mdss_phys", "vbif_phys";
-
- power-domains = <&gcc MDSS_GDSC>;
-
- clocks = <&gcc GCC_MDSS_AHB_CLK>,
- <&gcc GCC_MDSS_AXI_CLK>,
- <&gcc GCC_MDSS_VSYNC_CLK>;
- clock-names = "iface",
- "bus",
- "vsync";
-
- interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- mdp: mdp@1a01000 {
- compatible = "qcom,mdp5";
- reg = <0x1a01000 0x89000>;
- reg-names = "mdp_phys";
-
- interrupt-parent = <&mdss>;
- interrupts = <0 0>;
-
- clocks = <&gcc GCC_MDSS_AHB_CLK>,
- <&gcc GCC_MDSS_AXI_CLK>,
- <&gcc GCC_MDSS_MDP_CLK>,
- <&gcc GCC_MDSS_VSYNC_CLK>;
- clock-names = "iface",
- "bus",
- "core",
- "vsync";
-
- iommus = <&apps_iommu 4>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- mdp5_intf1_out: endpoint {
- remote-endpoint = <&dsi0_in>;
- };
- };
- };
- };
-
- dsi0: dsi@1a98000 {
- compatible = "qcom,mdss-dsi-ctrl";
- reg = <0x1a98000 0x25c>;
- reg-names = "dsi_ctrl";
-
- interrupt-parent = <&mdss>;
- interrupts = <4 0>;
-
- assigned-clocks = <&gcc BYTE0_CLK_SRC>,
- <&gcc PCLK0_CLK_SRC>;
- assigned-clock-parents = <&dsi_phy0 0>,
- <&dsi_phy0 1>;
-
- clocks = <&gcc GCC_MDSS_MDP_CLK>,
- <&gcc GCC_MDSS_AHB_CLK>,
- <&gcc GCC_MDSS_AXI_CLK>,
- <&gcc GCC_MDSS_BYTE0_CLK>,
- <&gcc GCC_MDSS_PCLK0_CLK>,
- <&gcc GCC_MDSS_ESC0_CLK>;
- clock-names = "mdp_core",
- "iface",
- "bus",
- "byte",
- "pixel",
- "core";
- phys = <&dsi_phy0>;
- phy-names = "dsi-phy";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- dsi0_in: endpoint {
- remote-endpoint = <&mdp5_intf1_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- dsi0_out: endpoint {
- };
- };
- };
- };
-
- dsi_phy0: dsi-phy@1a98300 {
- compatible = "qcom,dsi-phy-28nm-lp";
- reg = <0x1a98300 0xd4>,
- <0x1a98500 0x280>,
- <0x1a98780 0x30>;
- reg-names = "dsi_pll",
- "dsi_phy",
- "dsi_phy_regulator";
-
- #clock-cells = <1>;
- #phy-cells = <0>;
-
- clocks = <&gcc GCC_MDSS_AHB_CLK>,
- <&xo_board>;
- clock-names = "iface", "ref";
- };
- };
-
-
- hexagon@4080000 {
- compatible = "qcom,q6v5-pil";
- reg = <0x04080000 0x100>,
- <0x04020000 0x040>;
-
- reg-names = "qdsp6", "rmb";
-
- interrupts-extended = <&intc 0 24 1>,
- <&hexagon_smp2p_in 0 0>,
- <&hexagon_smp2p_in 1 0>,
- <&hexagon_smp2p_in 2 0>,
- <&hexagon_smp2p_in 3 0>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
- <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
- <&gcc GCC_BOOT_ROM_AHB_CLK>,
- <&xo_board>;
- clock-names = "iface", "bus", "mem", "xo";
-
- qcom,smem-states = <&hexagon_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- resets = <&scm 0>;
- reset-names = "mss_restart";
-
- cx-supply = <&pm8916_s1>;
- mx-supply = <&pm8916_l3>;
- pll-supply = <&pm8916_l7>;
-
- qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
-
- status = "disabled";
-
- mba {
- memory-region = <&mba_mem>;
- };
-
- mpss {
- memory-region = <&mpss_mem>;
- };
-
- smd-edge {
- interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
-
- qcom,smd-edge = <0>;
- qcom,ipc = <&apcs 8 12>;
- qcom,remote-pid = <1>;
-
- label = "hexagon";
-
- fastrpc {
- compatible = "qcom,fastrpc";
- qcom,smd-channels = "fastrpcsmd-apps-dsp";
- label = "adsp";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- cb@1{
- compatible = "qcom,fastrpc-compute-cb";
- reg = <1>;
- };
- };
- };
- };
-
- pronto: wcnss@a21b000 {
- compatible = "qcom,pronto-v2-pil", "qcom,pronto";
- reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
- reg-names = "ccu", "dxe", "pmu";
-
- memory-region = <&wcnss_mem>;
-
- interrupts-extended = <&intc 0 149 IRQ_TYPE_EDGE_RISING>,
- <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
- vddmx-supply = <&pm8916_l3>;
- vddpx-supply = <&pm8916_l7>;
-
- qcom,state = <&wcnss_smp2p_out 0>;
- qcom,state-names = "stop";
-
- pinctrl-names = "default";
- pinctrl-0 = <&wcnss_pin_a>;
-
- status = "disabled";
-
- iris {
- compatible = "qcom,wcn3620";
-
- clocks = <&rpmcc RPM_SMD_RF_CLK2>;
- clock-names = "xo";
-
- vddxo-supply = <&pm8916_l7>;
- vddrfa-supply = <&pm8916_s3>;
- vddpa-supply = <&pm8916_l9>;
- vdddig-supply = <&pm8916_l5>;
- };
-
- smd-edge {
- interrupts = <0 142 1>;
-
- qcom,ipc = <&apcs 8 17>;
- qcom,smd-edge = <6>;
- qcom,remote-pid = <4>;
-
- label = "pronto";
-
- wcnss {
- compatible = "qcom,wcnss";
- qcom,smd-channels = "WCNSS_CTRL";
-
- qcom,mmio = <&pronto>;
-
- bt {
- compatible = "qcom,wcnss-bt";
- };
-
- wifi {
- compatible = "qcom,wcnss-wlan";
-
- interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>,
- <0 146 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx", "rx";
-
- qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
- qcom,smem-state-names = "tx-enable", "tx-rings-empty";
- };
- };
- };
- };
-
- tpiu@820000 {
- compatible = "arm,coresight-tpiu", "arm,primecell";
- reg = <0x820000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- status = "disabled";
-
- in-ports {
- port {
- tpiu_in: endpoint {
- remote-endpoint = <&replicator_out1>;
- };
- };
- };
- };
-
- funnel@821000 {
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x821000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- status = "disabled";
-
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /*
- * Not described input ports:
- * 0 - connected to Resource and Power Manger CPU ETM
- * 1 - not-connected
- * 2 - connected to Modem CPU ETM
- * 3 - not-connected
- * 5 - not-connected
- * 6 - connected trought funnel to Wireless CPU ETM
- * 7 - connected to STM component
- */
-
- port@4 {
- reg = <4>;
- funnel0_in4: endpoint {
- remote-endpoint = <&funnel1_out>;
- };
- };
- };
-
- out-ports {
- port {
- funnel0_out: endpoint {
- remote-endpoint = <&etf_in>;
- };
- };
- };
- };
-
- replicator@824000 {
- compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
- reg = <0x824000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- status = "disabled";
-
- out-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- replicator_out0: endpoint {
- remote-endpoint = <&etr_in>;
- };
- };
- port@1 {
- reg = <1>;
- replicator_out1: endpoint {
- remote-endpoint = <&tpiu_in>;
- };
- };
- };
-
- in-ports {
- port {
- replicator_in: endpoint {
- remote-endpoint = <&etf_out>;
- };
- };
- };
- };
-
- etf@825000 {
- compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0x825000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- status = "disabled";
-
- in-ports {
- port {
- etf_in: endpoint {
- remote-endpoint = <&funnel0_out>;
- };
- };
- };
-
- out-ports {
- port {
- etf_out: endpoint {
- remote-endpoint = <&replicator_in>;
- };
- };
- };
- };
-
- etr@826000 {
- compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0x826000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- status = "disabled";
-
- in-ports {
- port {
- etr_in: endpoint {
- remote-endpoint = <&replicator_out0>;
- };
- };
- };
- };
-
- funnel@841000 { /* APSS funnel only 4 inputs are used */
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x841000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- status = "disabled";
-
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- funnel1_in0: endpoint {
- remote-endpoint = <&etm0_out>;
- };
- };
- port@1 {
- reg = <1>;
- funnel1_in1: endpoint {
- remote-endpoint = <&etm1_out>;
- };
- };
- port@2 {
- reg = <2>;
- funnel1_in2: endpoint {
- remote-endpoint = <&etm2_out>;
- };
- };
- port@3 {
- reg = <3>;
- funnel1_in3: endpoint {
- remote-endpoint = <&etm3_out>;
- };
- };
- };
-
- out-ports {
- port {
- funnel1_out: endpoint {
- remote-endpoint = <&funnel0_in4>;
- };
- };
- };
- };
-
- debug@850000 {
- compatible = "arm,coresight-cpu-debug","arm,primecell";
- reg = <0x850000 0x1000>;
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
- cpu = <&CPU0>;
- status = "disabled";
- };
-
- debug@852000 {
- compatible = "arm,coresight-cpu-debug","arm,primecell";
- reg = <0x852000 0x1000>;
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
- cpu = <&CPU1>;
- status = "disabled";
- };
-
- debug@854000 {
- compatible = "arm,coresight-cpu-debug","arm,primecell";
- reg = <0x854000 0x1000>;
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
- cpu = <&CPU2>;
- status = "disabled";
- };
-
- debug@856000 {
- compatible = "arm,coresight-cpu-debug","arm,primecell";
- reg = <0x856000 0x1000>;
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
- cpu = <&CPU3>;
- status = "disabled";
- };
-
- etm0: etm@85c000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x85c000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
- arm,coresight-loses-context-with-cpu;
-
- cpu = <&CPU0>;
-
- status = "disabled";
-
- out-ports {
- port {
- etm0_out: endpoint {
- remote-endpoint = <&funnel1_in0>;
- };
- };
- };
- };
-
- etm1: etm@85d000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x85d000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
- arm,coresight-loses-context-with-cpu;
-
- cpu = <&CPU1>;
-
- status = "disabled";
-
- out-ports {
- port {
- etm1_out: endpoint {
- remote-endpoint = <&funnel1_in1>;
- };
- };
- };
- };
-
- etm2: etm@85e000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x85e000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
- arm,coresight-loses-context-with-cpu;
-
- cpu = <&CPU2>;
-
- status = "disabled";
-
- out-ports {
- port {
- etm2_out: endpoint {
- remote-endpoint = <&funnel1_in2>;
- };
- };
- };
- };
-
- etm3: etm@85f000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x85f000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
- arm,coresight-loses-context-with-cpu;
-
- cpu = <&CPU3>;
-
- status = "disabled";
-
- out-ports {
- port {
- etm3_out: endpoint {
- remote-endpoint = <&funnel1_in3>;
- };
- };
- };
- };
-
- /* System CTIs */
- /* CTI 0 - TMC connections */
- cti@810000 {
- compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x810000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
- status = "disabled";
- };
-
- /* CTI 1 - TPIU connections */
- cti@811000 {
- compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x811000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
- status = "disabled";
- };
-
- /* CTIs 2-11 - no information - not instantiated */
-
- /* Core CTIs; CTIs 12-15 */
- /* CTI - CPU-0 */
- cti@858000 {
- compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
- "arm,primecell";
- reg = <0x858000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
- cpu = <&CPU0>;
- arm,cs-dev-assoc = <&etm0>;
-
- status = "disabled";
- };
-
- /* CTI - CPU-1 */
- cti@859000 {
- compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
- "arm,primecell";
- reg = <0x859000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
- cpu = <&CPU1>;
- arm,cs-dev-assoc = <&etm1>;
-
- status = "disabled";
- };
-
- /* CTI - CPU-2 */
- cti@85a000 {
- compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
- "arm,primecell";
- reg = <0x85a000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
- cpu = <&CPU2>;
- arm,cs-dev-assoc = <&etm2>;
-
- status = "disabled";
- };
-
- /* CTI - CPU-3 */
- cti@85b000 {
- compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
- "arm,primecell";
- reg = <0x85b000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
- cpu = <&CPU3>;
- arm,cs-dev-assoc = <&etm3>;
-
- status = "disabled";
- };
-
-
- venus: video-codec@1d00000 {
- compatible = "qcom,msm8916-venus";
- reg = <0x01d00000 0xff000>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&gcc VENUS_GDSC>;
- clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
- <&gcc GCC_VENUS0_AHB_CLK>,
- <&gcc GCC_VENUS0_AXI_CLK>;
- clock-names = "core", "iface", "bus";
- iommus = <&apps_iommu 5>;
- memory-region = <&venus_mem>;
- status = "okay";
-
- video-decoder {
- compatible = "venus-decoder";
- };
-
- video-encoder {
- compatible = "venus-encoder";
- };
- };
-
- camss: camss@1b00000 {
- compatible = "qcom,msm8916-camss";
- reg = <0x1b0ac00 0x200>,
- <0x1b00030 0x4>,
- <0x1b0b000 0x200>,
- <0x1b00038 0x4>,
- <0x1b08000 0x100>,
- <0x1b08400 0x100>,
- <0x1b0a000 0x500>,
- <0x1b00020 0x10>,
- <0x1b10000 0x1000>;
- reg-names = "csiphy0",
- "csiphy0_clk_mux",
- "csiphy1",
- "csiphy1_clk_mux",
- "csid0",
- "csid1",
- "ispif",
- "csi_clk_mux",
- "vfe0";
- interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "csiphy0",
- "csiphy1",
- "csid0",
- "csid1",
- "ispif",
- "vfe0";
- power-domains = <&gcc VFE_GDSC>;
- clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
- <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
- <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
- <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
- <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
- <&gcc GCC_CAMSS_CSI0_CLK>,
- <&gcc GCC_CAMSS_CSI0PHY_CLK>,
- <&gcc GCC_CAMSS_CSI0PIX_CLK>,
- <&gcc GCC_CAMSS_CSI0RDI_CLK>,
- <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
- <&gcc GCC_CAMSS_CSI1_CLK>,
- <&gcc GCC_CAMSS_CSI1PHY_CLK>,
- <&gcc GCC_CAMSS_CSI1PIX_CLK>,
- <&gcc GCC_CAMSS_CSI1RDI_CLK>,
- <&gcc GCC_CAMSS_AHB_CLK>,
- <&gcc GCC_CAMSS_VFE0_CLK>,
- <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
- <&gcc GCC_CAMSS_VFE_AHB_CLK>,
- <&gcc GCC_CAMSS_VFE_AXI_CLK>;
- clock-names = "top_ahb",
- "ispif_ahb",
- "csiphy0_timer",
- "csiphy1_timer",
- "csi0_ahb",
- "csi0",
- "csi0_phy",
- "csi0_pix",
- "csi0_rdi",
- "csi1_ahb",
- "csi1",
- "csi1_phy",
- "csi1_pix",
- "csi1_rdi",
- "ahb",
- "vfe0",
- "csi_vfe0",
- "vfe_ahb",
- "vfe_axi";
- vdda-supply = <&pm8916_l2>;
- iommus = <&apps_iommu 3>;
- status = "disabled";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- cci: cci@1b0c000 {
- compatible = "qcom,msm8916-cci";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x1b0c000 0x1000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
- clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
- <&gcc GCC_CAMSS_CCI_AHB_CLK>,
- <&gcc GCC_CAMSS_CCI_CLK>,
- <&gcc GCC_CAMSS_AHB_CLK>;
- clock-names = "camss_top_ahb", "cci_ahb",
- "cci", "camss_ahb";
- assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>,
- <&gcc GCC_CAMSS_CCI_CLK>;
- assigned-clock-rates = <80000000>, <19200000>;
- pinctrl-names = "default";
- pinctrl-0 = <&cci0_default>;
- status = "disabled";
-
- cci_i2c0: i2c-bus@0 {
- reg = <0>;
- clock-frequency = <400000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
- };
-
- smd {
- compatible = "qcom,smd";
-
- rpm {
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 8 0>;
- qcom,smd-edge = <15>;
-
- rpm-requests {
- compatible = "qcom,rpm-msm8916";
- qcom,smd-channels = "rpm_requests";
-
- rpmcc: qcom,rpmcc {
- compatible = "qcom,rpmcc-msm8916";
- #clock-cells = <1>;
- };
-
- smd_rpm_regulators: pm8916-regulators {
- compatible = "qcom,rpm-pm8916-regulators";
-
- pm8916_s1: s1 {};
- pm8916_s3: s3 {};
- pm8916_s4: s4 {};
-
- pm8916_l1: l1 {};
- pm8916_l2: l2 {};
- pm8916_l3: l3 {};
- pm8916_l4: l4 {};
- pm8916_l5: l5 {};
- pm8916_l6: l6 {};
- pm8916_l7: l7 {};
- pm8916_l8: l8 {};
- pm8916_l9: l9 {};
- pm8916_l10: l10 {};
- pm8916_l11: l11 {};
- pm8916_l12: l12 {};
- pm8916_l13: l13 {};
- pm8916_l14: l14 {};
- pm8916_l15: l15 {};
- pm8916_l16: l16 {};
- pm8916_l17: l17 {};
- pm8916_l18: l18 {};
- };
- };
- };
- };
-
- hexagon-smp2p {
- compatible = "qcom,smp2p";
- qcom,smem = <435>, <428>;
-
- interrupts = <0 27 IRQ_TYPE_EDGE_RISING>;
-
- qcom,ipc = <&apcs 8 14>;
-
- qcom,local-pid = <0>;
- qcom,remote-pid = <1>;
-
- hexagon_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
-
- #qcom,smem-state-cells = <1>;
- };
-
- hexagon_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- wcnss-smp2p {
- compatible = "qcom,smp2p";
- qcom,smem = <451>, <431>;
-
- interrupts = <0 143 IRQ_TYPE_EDGE_RISING>;
-
- qcom,ipc = <&apcs 8 18>;
-
- qcom,local-pid = <0>;
- qcom,remote-pid = <4>;
-
- wcnss_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
-
- #qcom,smem-state-cells = <1>;
- };
-
- wcnss_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- smsm {
- compatible = "qcom,smsm";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- qcom,ipc-1 = <&apcs 8 13>;
- qcom,ipc-3 = <&apcs 8 19>;
-
- apps_smsm: apps@0 {
- reg = <0>;
-
- #qcom,smem-state-cells = <1>;
- };
-
- hexagon_smsm: hexagon@1 {
- reg = <1>;
- interrupts = <0 26 IRQ_TYPE_EDGE_RISING>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- wcnss_smsm: wcnss@6 {
- reg = <6>;
- interrupts = <0 144 IRQ_TYPE_EDGE_RISING>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
};
#include "msm8916-pins.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 188fff2..8626b3a 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -335,7 +335,7 @@ blsp_i2c6: i2c@f9928000 {
blsp2_uart2: serial@f995e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf995e000 0x1000>;
- interrupt = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
index 4032b74..791f254 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -221,7 +221,12 @@ pmi8994_regulators: pmi8994-regulators {
};
&sdhc1 {
- status = "okay";
+ /* There is an issue with the eMMC causing permanent
+ * damage to the card if a quirk isn't addressed.
+ * Until it's fixed, disable the MMC so as not to brick
+ * devices.
+ */
+ status = "disabled";
/* Downstream pushes 2.95V to the sdhci device,
* but upstream driver REALLY wants to make vmmc 1.8v
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 9951286..fd6ae54 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1009,7 +1009,8 @@ camss: camss@a00000 {
"ispif",
"vfe0",
"vfe1";
- power-domains = <&mmcc VFE0_GDSC>;
+ power-domains = <&mmcc VFE0_GDSC>,
+ <&mmcc VFE1_GDSC>;
clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
<&mmcc CAMSS_ISPIF_AHB_CLK>,
<&mmcc CAMSS_CSI0PHYTIMER_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi
index ea0e955..2e6a6f6 100644
--- a/arch/arm64/boot/dts/qcom/pm660.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm660.dtsi
@@ -44,7 +44,7 @@ pm660_gpios: gpios@c000 {
gpio-ranges = <&pm660_gpios 0 0 13>;
#gpio-cells = <2>;
interrupt-controller;
- interrupt-cells =<2>;
+ #interrupt-cells = <2>;
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index 0bcdf04..f931cb0 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -1,24 +1,17 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
- pm8916_0: pm8916@0 {
+ pm8916_0: pmic@0 {
compatible = "qcom,pm8916", "qcom,spmi-pmic";
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
- rtc@6000 {
- compatible = "qcom,pm8941-rtc";
- reg = <0x6000>;
- reg-names = "rtc", "alarm";
- interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
- };
-
pon@800 {
compatible = "qcom,pm8916-pon";
reg = <0x800>;
@@ -33,6 +26,14 @@ pwrkey {
linux,code = <KEY_POWER>;
};
+ pm8916_resin: resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ status = "disabled";
+ };
+
watchdog {
compatible = "qcom,pm8916-wdt";
interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
@@ -40,15 +41,53 @@ watchdog {
};
};
- pm8916_gpios: gpios@c000 {
- compatible = "qcom,pm8916-gpio";
- reg = <0xc000>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
- <0 0xc1 0 IRQ_TYPE_NONE>,
- <0 0xc2 0 IRQ_TYPE_NONE>,
- <0 0xc3 0 IRQ_TYPE_NONE>;
+ pm8916_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400>;
+ interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+ io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
+ io-channel-names = "thermal";
+ #thermal-sensor-cells = <0>;
+ };
+
+ pm8916_vadc: adc@3100 {
+ compatible = "qcom,spmi-vadc";
+ reg = <0x3100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+
+ adc-chan@0 {
+ reg = <VADC_USBIN>;
+ qcom,pre-scaling = <1 10>;
+ };
+ adc-chan@7 {
+ reg = <VADC_VSYS>;
+ qcom,pre-scaling = <1 3>;
+ };
+ adc-chan@8 {
+ reg = <VADC_DIE_TEMP>;
+ };
+ adc-chan@9 {
+ reg = <VADC_REF_625MV>;
+ };
+ adc-chan@a {
+ reg = <VADC_REF_1250MV>;
+ };
+ adc-chan@e {
+ reg = <VADC_GND_REF>;
+ };
+ adc-chan@f {
+ reg = <VADC_VDD_VADC>;
+ };
+ };
+
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
pm8916_mpps: mpps@a000 {
@@ -62,50 +101,19 @@ pm8916_mpps: mpps@a000 {
<0 0xa3 0 IRQ_TYPE_NONE>;
};
- pm8916_temp: temp-alarm@2400 {
- compatible = "qcom,spmi-temp-alarm";
- reg = <0x2400>;
- interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
- io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
- io-channel-names = "thermal";
- #thermal-sensor-cells = <0>;
- };
-
- pm8916_vadc: vadc@3100 {
- compatible = "qcom,spmi-vadc";
- reg = <0x3100>;
- interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- #io-channel-cells = <1>;
-
- usb_in {
- reg = <VADC_USBIN>;
- qcom,pre-scaling = <1 10>;
- };
- vph_pwr {
- reg = <VADC_VSYS>;
- qcom,pre-scaling = <1 3>;
- };
- die_temp {
- reg = <VADC_DIE_TEMP>;
- };
- ref_625mv {
- reg = <VADC_REF_625MV>;
- };
- ref_1250v {
- reg = <VADC_REF_1250MV>;
- };
- ref_gnd {
- reg = <VADC_GND_REF>;
- };
- ref_vdd {
- reg = <VADC_VDD_VADC>;
- };
+ pm8916_gpios: gpios@c000 {
+ compatible = "qcom,pm8916-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>;
};
};
- pm8916_1: pm8916@1 {
+ pm8916_1: pmic@1 {
compatible = "qcom,pm8916", "qcom,spmi-pmic";
reg = <0x1 SPMI_USID>;
#address-cells = <1>;
@@ -117,9 +125,9 @@ pm8916_vib: vibrator@c000 {
status = "disabled";
};
- wcd_codec: codec@f000 {
+ wcd_codec: audio-codec@f000 {
compatible = "qcom,pm8916-wcd-analog-codec";
- reg = <0xf000 0x200>;
+ reg = <0xf000>;
reg-names = "pmic-codec-core";
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
clock-names = "mclk";
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
index 479ad3a..08d5d51 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
@@ -13,7 +13,7 @@ / {
};
ðernet {
- status = "ok";
+ status = "okay";
snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 6422cf9..a80c578 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -97,7 +97,7 @@ pms405_s3: s3 {
};
&pcie {
- status = "ok";
+ status = "okay";
perst-gpio = <&tlmm 43 GPIO_ACTIVE_LOW>;
@@ -106,22 +106,22 @@ &pcie {
};
&pcie_phy {
- status = "ok";
+ status = "okay";
vdda-vp-supply = <&vreg_l3_1p05>;
vdda-vph-supply = <&vreg_l5_1p8>;
};
&remoteproc_adsp {
- status = "ok";
+ status = "okay";
};
&remoteproc_cdsp {
- status = "ok";
+ status = "okay";
};
&remoteproc_wcss {
- status = "ok";
+ status = "okay";
};
&rpm_requests {
@@ -215,7 +215,7 @@ vreg_l13_3p3: l13 {
};
&sdcc1 {
- status = "ok";
+ status = "okay";
supports-cqe;
mmc-ddr-1_8v;
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
new file mode 100644
index 0000000..1528a86
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -0,0 +1,686 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. Robotics RB5";
+ compatible = "qcom,qrb5165-rb5", "qcom,sm8250";
+
+ aliases {
+ serial0 = &uart12;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ dc12v: dc12v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "DC12V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user4 {
+ label = "green:user4";
+ gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "panic-indicator";
+ default-state = "off";
+ };
+
+ wlan {
+ label = "yellow:wlan";
+ gpios = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+
+ bt {
+ label = "blue:bt";
+ gpios = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "bluetooth-power";
+ default-state = "off";
+ };
+
+ };
+
+ vbat: vbat-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VBAT";
+ vin-supply = <&vreg_l11c_3p3>;
+ regulator-min-microvolt = <4200000>;
+ regulator-max-microvolt = <4200000>;
+ regulator-always-on;
+ };
+
+ vbat_som: vbat-som-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VBAT_SOM";
+ vin-supply = <&dc12v>;
+ regulator-min-microvolt = <4200000>;
+ regulator-max-microvolt = <4200000>;
+ regulator-always-on;
+ };
+
+ vdc_3v3: vdc-3v3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VDC_3V3";
+ vin-supply = <&dc12v>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdc_5v: vdc-5v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VDC_5V";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&vreg_l11c_3p3>;
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ };
+
+ vreg_s4a_1p8: vreg-s4a-1p8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+};
+
+&apps_rsc {
+ pm8009-rpmh-regulators {
+ compatible = "qcom,pm8009-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-l2-supply = <&vreg_s8c_1p3>;
+ vdd-l5-l6-supply = <&vreg_bob>;
+ vdd-l7-supply = <&vreg_s4a_1p8>;
+
+ vreg_l1f_1p1: ldo1 {
+ regulator-name = "vreg_l1f_1p1";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f_1p2: ldo2 {
+ regulator-name = "vreg_l2f_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6f_2p8: ldo6 {
+ regulator-name = "vreg_l6f_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7f_1p8: ldo7 {
+ regulator-name = "vreg_l7f_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pm8150-rpmh-regulators {
+ compatible = "qcom,pm8150-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-l2-l10-supply = <&vreg_bob>;
+ vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+ vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+ vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+ vreg_l2a_3p1: ldo2 {
+ regulator-name = "vreg_l2a_3p1";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3a_0p9: ldo3 {
+ regulator-name = "vreg_l3a_0p9";
+ regulator-min-microvolt = <928000>;
+ regulator-max-microvolt = <932000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a_0p88: ldo5 {
+ regulator-name = "vreg_l5a_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a_1p2: ldo6 {
+ regulator-name = "vreg_l6a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a_1p7: ldo7 {
+ regulator-name = "vreg_l7a_1p7";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a_1p2: ldo9 {
+ regulator-name = "vreg_l9a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10a_1p8: ldo10 {
+ regulator-name = "vreg_l10a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12a_1p8: ldo12 {
+ regulator-name = "vreg_l12a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13a_ts_3p0: ldo13 {
+ regulator-name = "vreg_l13a_ts_3p0";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14a_1p8: ldo14 {
+ regulator-name = "vreg_l14a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15a_1p8: ldo15 {
+ regulator-name = "vreg_l15a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16a_2p7: ldo16 {
+ regulator-name = "vreg_l16a_2p7";
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_3p0: ldo17 {
+ regulator-name = "vreg_l17a_3p0";
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18a_0p92: ldo18 {
+ regulator-name = "vreg_l18a_0p92";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5a_1p9: smps5 {
+ regulator-name = "vreg_s5a_1p9";
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s6a_0p95: smps6 {
+ regulator-name = "vreg_s6a_0p95";
+ regulator-min-microvolt = <920000>;
+ regulator-max-microvolt = <1128000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pm8150l-rpmh-regulators {
+ compatible = "qcom,pm8150l-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+ vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+ vdd-l4-l5-l6-supply = <&vreg_bob>;
+ vdd-l7-l11-supply = <&vreg_bob>;
+ vdd-l9-l10-supply = <&vreg_bob>;
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_bob: bob {
+ regulator-name = "vreg_bob";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <4000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-name = "vreg_l1c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_1p2: ldo2 {
+ regulator-name = "vreg_l2c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_0p8: ldo3 {
+ regulator-name = "vreg_l3c_0p8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c_1p7: ldo4 {
+ regulator-name = "vreg_l4c_1p7";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c_1p8: ldo5 {
+ regulator-name = "vreg_l5c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c_2p96: ldo6 {
+ regulator-name = "vreg_l6c_2p96";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c_cam_vcm0_2p85: ldo7 {
+ regulator-name = "vreg_l7c_cam_vcm0_2p85";
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p8: ldo8 {
+ regulator-name = "vreg_l8c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p96: ldo9 {
+ regulator-name = "vreg_l9c_2p96";
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10c_3p0: ldo10 {
+ regulator-name = "vreg_l10c_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_3p3: ldo11 {
+ regulator-name = "vreg_l11c_3p3";
+ regulator-min-microvolt = <3296000>;
+ regulator-max-microvolt = <3296000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_s8c_1p3: smps8 {
+ regulator-name = "vreg_s8c_1p3";
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+/* LS-I2C0 */
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+/* LS-I2C1 */
+&i2c15 {
+ status = "okay";
+};
+
+&pm8150_gpios {
+ gpio-reserved-ranges = <1 1>, <3 2>, <7 1>;
+ gpio-line-names =
+ "NC",
+ "OPTION2",
+ "PM_GPIO-F",
+ "PM_SLP_CLK_IN",
+ "OPTION1",
+ "VOL_UP_N",
+ "PM8250_GPIO7", /* Blue LED */
+ "SP_ARI_PWR_ALARM",
+ "GPIO_9_P", /* Yellow LED */
+ "GPIO_10_P"; /* Green LED */
+};
+
+&pm8150b_gpios {
+ gpio-line-names =
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "HAP_BOOST_EN", /* SOM */
+ "SMB_STAT", /* SOM */
+ "NC",
+ "NC",
+ "SDM_FORCE_USB_BOOT",
+ "NC",
+ "NC",
+ "NC";
+};
+
+&pm8150l_gpios {
+ gpio-line-names =
+ "NC",
+ "PM3003A_EN",
+ "NC",
+ "NC",
+ "PM_GPIO5", /* HDMI RST_N */
+ "PM_GPIO-A", /* PWM */
+ "PM_GPIO7",
+ "NC",
+ "NC",
+ "PM_GPIO-B",
+ "NC",
+ "PM3003A_MODE";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&qupv3_id_2 {
+ status = "okay";
+};
+
+/* CAN */
+&spi0 {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <40 4>;
+ gpio-line-names =
+ "GPIO-MM",
+ "GPIO-NN",
+ "GPIO-OO",
+ "GPIO-PP",
+ "GPIO-A",
+ "GPIO-C",
+ "GPIO-E",
+ "GPIO-D",
+ "I2C0-SDA",
+ "I2C0-SCL",
+ "GPIO-TT", /* GPIO_10 */
+ "NC",
+ "GPIO_12_I2C_SDA",
+ "GPIO_13_I2C_SCL",
+ "GPIO-X",
+ "GPIO_15_RGMII_INT",
+ "HST_BT_UART_CTS",
+ "HST_BT_UART_RFR",
+ "HST_BT_UART_TX",
+ "HST_BT_UART_RX",
+ "HST_WLAN_EN", /* GPIO_20 */
+ "HST_BT_EN",
+ "GPIO-AAA",
+ "GPIO-BBB",
+ "GPIO-CCC",
+ "GPIO-Z",
+ "GPIO-DDD",
+ "GPIO-BB",
+ "GPIO_28_CAN_SPI_MISO",
+ "GPIO_29_CAN_SPI_MOSI",
+ "GPIO_30_CAN_SPI_CLK", /* GPIO_30 */
+ "GPIO_31_CAN_SPI_CS",
+ "GPIO-UU",
+ "NC",
+ "UART1_TXD_SOM",
+ "UART1_RXD_SOM",
+ "UART0_CTS",
+ "UART0_RTS",
+ "UART0_TXD",
+ "UART0_RXD",
+ "SPI1_MISO", /* GPIO_40 */
+ "SPI1_MOSI",
+ "SPI1_CLK",
+ "SPI1_CS",
+ "I2C1_SDA",
+ "I2C1_SCL",
+ "GPIO-F",
+ "GPIO-JJ",
+ "Board_ID1",
+ "Board_ID2",
+ "NC", /* GPIO_50 */
+ "NC",
+ "SPI0_MISO",
+ "SPI0_MOSI",
+ "SPI0_SCLK",
+ "SPI0_CS",
+ "GPIO-QQ",
+ "GPIO-RR",
+ "USB2LAN_RESET",
+ "USB2LAN_EXTWAKE",
+ "NC", /* GPIO_60 */
+ "NC",
+ "NC",
+ "LT9611_INT",
+ "GPIO-AA",
+ "USB_CC_DIR",
+ "GPIO-G",
+ "GPIO-LL",
+ "USB_DP_HPD_1P8",
+ "NC",
+ "NC", /* GPIO_70 */
+ "SD_CMD",
+ "SD_DAT3",
+ "SD_SCLK",
+ "SD_DAT2",
+ "SD_DAT1",
+ "SD_DAT0", /* BOOT_CFG3 */
+ "SD_UFS_CARD_DET_N",
+ "GPIO-II",
+ "PCIE0_RST_N",
+ "PCIE0_CLK_REQ_N", /* GPIO_80 */
+ "PCIE0_WAKE_N",
+ "GPIO-CC",
+ "GPIO-DD",
+ "GPIO-EE",
+ "GPIO-FF",
+ "GPIO-GG",
+ "GPIO-HH",
+ "GPIO-VV",
+ "GPIO-WW",
+ "NC", /* GPIO_90 */
+ "NC",
+ "GPIO-K",
+ "GPIO-I",
+ "CSI0_MCLK",
+ "CSI1_MCLK",
+ "CSI2_MCLK",
+ "CSI3_MCLK",
+ "GPIO-AA", /* CSI4_MCLK */
+ "GPIO-BB", /* CSI5_MCLK */
+ "GPIO-KK", /* GPIO_100 */
+ "CCI_I2C_SDA0",
+ "CCI_I2C_SCL0",
+ "CCI_I2C_SDA1",
+ "CCI_I2C_SCL1",
+ "CCI_I2C_SDA2",
+ "CCI_I2C_SCL2",
+ "CCI_I2C_SDA3",
+ "CCI_I2C_SCL3",
+ "GPIO-L",
+ "NC", /* GPIO_110 */
+ "NC",
+ "ACCEL_INT",
+ "GYRO_INT",
+ "GPIO-J",
+ "GPIO-YY",
+ "GPIO-H",
+ "GPIO-ZZ",
+ "NC",
+ "NC",
+ "NC", /* GPIO_120 */
+ "NC",
+ "MAG_INT",
+ "MAG_DRDY_INT",
+ "HST_SW_CTRL",
+ "GPIO-M",
+ "GPIO-N",
+ "GPIO-O",
+ "GPIO-P",
+ "PS_INT",
+ "WSA1_EN", /* GPIO_130 */
+ "USB_HUB_RESET",
+ "SDM_FORCE_USB_BOOT",
+ "I2S1_CLK_HDMI",
+ "I2S1_DATA0_HDMI",
+ "I2S1_WS_HDMI",
+ "GPIO-B",
+ "GPIO_137", /* To LT9611_I2S_MCLK_3V3 */
+ "PCM_CLK",
+ "PCM_DI",
+ "PCM_DO", /* GPIO_140 */
+ "PCM_FS",
+ "HST_SLIM_CLK",
+ "HST_SLIM_DATA",
+ "GPIO-U",
+ "GPIO-Y",
+ "GPIO-R",
+ "GPIO-Q",
+ "GPIO-S",
+ "GPIO-T",
+ "GPIO-V", /* GPIO_150 */
+ "GPIO-W",
+ "DMIC_CLK1",
+ "DMIC_DATA1",
+ "DMIC_CLK2",
+ "DMIC_DATA2",
+ "WSA_SWR_CLK",
+ "WSA_SWR_DATA",
+ "DMIC_CLK3",
+ "DMIC_DATA3",
+ "I2C4_SDA", /* GPIO_160 */
+ "I2C4_SCL",
+ "SPI3_CS1",
+ "SPI3_CS2",
+ "SPI2_MISO_LS3",
+ "SPI2_MOSI_LS3",
+ "SPI2_CLK_LS3",
+ "SPI2_ACCEL_CS_LS3",
+ "SPI2_CS1",
+ "NC",
+ "GPIO-SS", /* GPIO_170 */
+ "GPIO-XX",
+ "SPI3_MISO",
+ "SPI3_MOSI",
+ "SPI3_CLK",
+ "SPI3_CS",
+ "HST_BLE_SNS_UART_TX",
+ "HST_BLE_SNS_UART_RX",
+ "HST_WLAN_UART_TX",
+ "HST_WLAN_UART_RX";
+};
+
+&uart12 {
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ status = "okay";
+
+ vcc-supply = <&vreg_l17a_3p0>;
+ vcc-max-microamp = <800000>;
+ vccq-supply = <&vreg_l6a_1p2>;
+ vccq-max-microamp = <800000>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+ vccq2-max-microamp = <800000>;
+};
+
+&ufs_mem_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l5a_0p88>;
+ vdda-max-microamp = <89900>;
+ vdda-pll-supply = <&vreg_l9a_1p2>;
+ vdda-pll-max-microamp = <18800>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index d8b5507..e77a792 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -346,6 +346,13 @@ &sdhc_2 {
&uart3 {
status = "okay";
+ /delete-property/interrupts;
+ interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+ <&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-1 = <&qup_uart3_sleep>;
+
bluetooth: wcn3990-bt {
compatible = "qcom,wcn3990-bt";
vddio-supply = <&vreg_l10a_1p8>;
@@ -353,7 +360,6 @@ bluetooth: wcn3990-bt {
vddrf-supply = <&vreg_l2c_1p3>;
vddch0-supply = <&vreg_l10c_3p3>;
max-speed = <3200000>;
- clocks = <&rpmhcc RPMH_RF_CLK2>;
};
};
@@ -474,32 +480,30 @@ pinconf {
&qup_uart3_default {
pinconf-cts {
/*
- * Configure a pull-down on 38 (CTS) to match the pull of
+ * Configure a pull-down on CTS to match the pull of
* the Bluetooth module.
*/
pins = "gpio38";
bias-pull-down;
- output-high;
};
pinconf-rts {
- /* We'll drive 39 (RTS), so no pull */
+ /* We'll drive RTS, so no pull */
pins = "gpio39";
drive-strength = <2>;
bias-disable;
};
pinconf-tx {
- /* We'll drive 40 (TX), so no pull */
+ /* We'll drive TX, so no pull */
pins = "gpio40";
drive-strength = <2>;
bias-disable;
- output-high;
};
pinconf-rx {
/*
- * Configure a pull-up on 41 (RX). This is needed to avoid
+ * Configure a pull-up on RX. This is needed to avoid
* garbage data when the TX pin of the Bluetooth module is
* in tri-state (module powered off or not driving the
* signal yet).
@@ -547,3 +551,51 @@ pinconf {
};
};
+&tlmm {
+ qup_uart3_sleep: qup-uart3-sleep {
+ pinmux {
+ pins = "gpio38", "gpio39",
+ "gpio40", "gpio41";
+ function = "gpio";
+ };
+
+ pinconf-cts {
+ /*
+ * Configure a pull-down on CTS to match the pull of
+ * the Bluetooth module.
+ */
+ pins = "gpio38";
+ bias-pull-down;
+ };
+
+ pinconf-rts {
+ /*
+ * Configure pull-down on RTS. As RTS is active low
+ * signal, pull it low to indicate the BT SoC that it
+ * can wakeup the system anytime from suspend state by
+ * pulling RX low (by sending wakeup bytes).
+ */
+ pins = "gpio39";
+ bias-pull-down;
+ };
+
+ pinconf-tx {
+ /*
+ * Configure pull-up on TX when it isn't actively driven
+ * to prevent BT SoC from receiving garbage during sleep.
+ */
+ pins = "gpio40";
+ bias-pull-up;
+ };
+
+ pinconf-rx {
+ /*
+ * Configure a pull-up on RX. This is needed to avoid
+ * garbage data when the TX pin of the Bluetooth module
+ * is floating which may cause spurious wakeups.
+ */
+ pins = "gpio41";
+ bias-pull-up;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
new file mode 100644
index 0000000..ae4c23a4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-lazor.dtsi"
+
+/ {
+ model = "Google Lazor (rev0)";
+ compatible = "google,lazor-rev0", "qcom,sc7180";
+};
+
+&sn65dsi86_out {
+ /*
+ * Lane 0 was incorrectly mapped on the cable, but we've now decided
+ * that the cable is canon and in -rev1+ we'll make a board change
+ * that means we no longer need the swizzle.
+ */
+ lane-polarities = <1 0>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts
new file mode 100644
index 0000000..c3f426c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-lazor-r1.dts"
+
+/ {
+ model = "Google Lazor (rev1+) with KB Backlight";
+ compatible = "google,lazor-sku2", "qcom,sc7180";
+};
+
+&keyboard_backlight {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts
new file mode 100644
index 0000000..73e59cf
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-lazor-r1.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Lazor (rev1+) with LTE";
+ compatible = "google,lazor-sku0", "qcom,sc7180";
+};
+
+&keyboard_backlight {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
new file mode 100644
index 0000000..3151ae3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-lazor.dtsi"
+
+/ {
+ model = "Google Lazor (rev1+)";
+ compatible = "google,lazor", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
new file mode 100644
index 0000000..180ef9e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180.dtsi"
+
+ap_ec_spi: &spi6 {};
+ap_h1_spi: &spi0 {};
+
+#include "sc7180-trogdor.dtsi"
+
+/ {
+ panel: panel {
+ compatible = "boe,nv133fhm-n62";
+ power-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+ hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ port {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&sn65dsi86_out>;
+ };
+ };
+ };
+ };
+};
+
+&ap_sar_sensor {
+ status = "okay";
+};
+
+ap_ts_pen_1v8: &i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ post-power-on-delay-ms = <20>;
+ hid-descr-addr = <0x0001>;
+
+ vdd-supply = <&pp3300_ts>;
+ };
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&ts_reset_l {
+ pinconf {
+ /* This pin is not connected on -rev0, pull up to park. */
+ /delete-property/bias-disable;
+ bias-pull-up;
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "ESIM_MISO",
+ "ESIM_MOSI",
+ "ESIM_CLK",
+ "ESIM_CS_L",
+ "",
+ "",
+ "AP_TP_I2C_SDA",
+ "AP_TP_I2C_SCL",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "",
+ "EDP_BRIJ_IRQ",
+ "AP_EDP_BKLTEN",
+ "AP_RAM_ID2",
+ "",
+ "EDP_BRIJ_I2C_SDA",
+ "EDP_BRIJ_I2C_SCL",
+ "HUB_RST_L",
+ "",
+ "AP_RAM_ID1",
+ "AP_SKU_ID2",
+ "",
+ "",
+ "AMP_EN",
+ "P_SENSOR_INT_L",
+ "AP_SAR_SENSOR_SDA",
+ "AP_SAR_SENSOR_SCL",
+ "",
+ "HP_IRQ",
+ "AP_RAM_ID0",
+ "EN_PP3300_DX_EDP",
+ "AP_BRD_ID2",
+ "BRIJ_SUSPEND",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "",
+ "",
+ "",
+ "",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "",
+ "",
+ "AMP_DIN",
+ "",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "TRACKPAD_INT_1V8_ODL",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "DBG_SPI_HOLD_L",
+ "AP_SPI_CS0_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RST",
+ "UIM2_PRESENT",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RST",
+ "",
+ "EN_PP3300_CODEC",
+ "EN_PP3300_HUB",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_SKU_ID1",
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "EDP_BRIJ_EN",
+ "AP_SKU_ID0",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_TS_PEN_I2C_SDA",
+ "AP_TS_PEN_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi
new file mode 100644
index 0000000..44956e3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor dts fragment for LTE SKUs
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+&ap_sar_sensor {
+ label = "proximity-wifi-lte";
+};
+
+&remoteproc_mpss {
+ firmware-name = "qcom/sc7180-trogdor/modem/mba.mbn",
+ "qcom/sc7180-trogdor/modem/qdsp6sw.mbn";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts
new file mode 100644
index 0000000..1123c02
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-r1.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Trogdor (rev1+) with LTE";
+ compatible = "google,trogdor-sku0", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
new file mode 100644
index 0000000..0a281c2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+
+ap_ec_spi: &spi6 {};
+ap_h1_spi: &spi0 {};
+
+#include "sc7180-trogdor.dtsi"
+
+/ {
+ model = "Google Trogdor (rev1+)";
+ compatible = "google,trogdor", "qcom,sc7180";
+
+ panel: panel {
+ compatible = "auo,b116xa01";
+ power-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+ hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ port {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&sn65dsi86_out>;
+ };
+ };
+ };
+ };
+};
+
+&ap_sar_sensor_i2c {
+ /* Not hooked up */
+ status = "disabled";
+};
+
+ap_ts_pen_1v8: &i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@10 {
+ compatible = "elan,ekth3500";
+ reg = <0x10>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ vcc33-supply = <&pp3300_ts>;
+
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&sdhc_2 {
+ status = "okay";
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "ESIM_MISO",
+ "ESIM_MOSI",
+ "ESIM_CLK",
+ "ESIM_CS_L",
+ "FP_TO_AP_IRQ_L",
+ "FP_RST_L",
+ "AP_TP_I2C_SDA",
+ "AP_TP_I2C_SCL",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "FPMCU_BOOT0",
+ "EDP_BRIJ_IRQ",
+ "AP_EDP_BKLTEN",
+ "",
+ "",
+ "EDP_BRIJ_I2C_SDA",
+ "EDP_BRIJ_I2C_SCL",
+ "HUB_RST_L",
+ "PEN_RST_ODL",
+ "AP_RAM_ID1",
+ "AP_RAM_ID2",
+ "PEN_IRQ_L",
+ "FPMCU_SEL",
+ "AMP_EN",
+ "P_SENSOR_INT_L",
+ "AP_SAR_SENSOR_SDA",
+ "AP_SAR_SENSOR_SCL",
+ "",
+ "HP_IRQ",
+ "AP_RAM_ID0",
+ "EN_PP3300_DX_EDP",
+ "AP_BRD_ID2",
+ "BRIJ_SUSPEND",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "",
+ "",
+ "",
+ "",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "",
+ "",
+ "AMP_DIN",
+ "PEN_PDCT_L",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "TRACKPAD_INT_1V8_ODL",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "DBG_SPI_HOLD_L",
+ "AP_SPI_CS0_L",
+ "SD_CD_ODL",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RST",
+ "UIM2_PRESENT",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RST",
+ "",
+ "EN_PP3300_CODEC",
+ "EN_PP3300_HUB",
+ "",
+ "AP_SPI_FP_MISO",
+ "AP_SPI_FP_MOSI",
+ "AP_SPI_FP_CLK",
+ "AP_SPI_FP_CS_L",
+ "AP_SKU_ID1",
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "EDP_BRIJ_EN",
+ "AP_SKU_ID0",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_TS_PEN_I2C_SDA",
+ "AP_TS_PEN_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
new file mode 100644
index 0000000..bf87558
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -0,0 +1,1402 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor device tree source (common between revisions)
+ *
+ * Copyright 2019 Google LLC.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+/* PMICs depend on spmi_bus label and so must come after SoC */
+#include "pm6150.dtsi"
+#include "pm6150l.dtsi"
+
+/*
+ * Reserved memory changes
+ *
+ * Delete all unused memory nodes and define the peripheral memory regions
+ * required by the board dts.
+ */
+
+/delete-node/ &hyp_mem;
+/delete-node/ &xbl_mem;
+/delete-node/ &aop_mem;
+/delete-node/ &sec_apps_mem;
+/delete-node/ &tz_mem;
+
+/* Increase the size from 2MB to 8MB */
+&rmtfs_mem {
+ reg = <0x0 0x84400000 0x0 0x800000>;
+};
+
+/ {
+ reserved-memory {
+ atf_mem: memory@80b00000 {
+ reg = <0x0 0x80b00000 0x0 0x100000>;
+ no-map;
+ };
+
+ mpss_mem: memory@86000000 {
+ reg = <0x0 0x86000000 0x0 0x8c00000>;
+ no-map;
+ };
+
+ camera_mem: memory@8ec00000 {
+ reg = <0x0 0x8ec00000 0x0 0x500000>;
+ no-map;
+ };
+
+ venus_mem: memory@8f600000 {
+ reg = <0 0x8f600000 0 0x500000>;
+ no-map;
+ };
+
+ wlan_mem: memory@94100000 {
+ reg = <0x0 0x94100000 0x0 0x200000>;
+ no-map;
+ };
+
+ mba_mem: memory@94400000 {
+ reg = <0x0 0x94400000 0x0 0x200000>;
+ no-map;
+ };
+ };
+
+ aliases {
+ bluetooth0 = &bluetooth;
+ hsuart0 = &uart3;
+ serial0 = &uart8;
+ wifi0 = &wifi;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ /* FIXED REGULATORS - parents above children */
+
+ /* This is the top level supply and variable voltage */
+ ppvar_sys: ppvar-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "ppvar_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* This divides ppvar_sys by 2, so voltage is variable */
+ src_vph_pwr: src-vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "src_vph_pwr";
+
+ /* EC turns on with switchcap_on; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&ppvar_sys>;
+ };
+
+ pp5000_a: pp5000-a-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pp5000_a";
+
+ /* EC turns on with en_pp5000_a; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ vin-supply = <&ppvar_sys>;
+ };
+
+ pp3300_a: pp3300-a-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_a";
+
+ /* EC turns on with en_pp3300_a; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ /*
+ * Actually should be pp3300 but that's practically an alias for
+ * pp3300_a so we use pp3300's vin-supply here to avoid one more
+ * node.
+ */
+ vin-supply = <&ppvar_sys>;
+ };
+
+ pp3300_audio:
+ pp3300_codec: pp3300-codec-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_codec";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&en_pp3300_codec>;
+
+ vin-supply = <&pp3300_a>;
+ };
+
+ pp3300_dx_edp:
+ pp3300_ts: pp3300-dx-edp-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_dx_edp";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&en_pp3300_dx_edp>;
+
+ vin-supply = <&pp3300_a>;
+ };
+
+ pp3300_fp_tp: pp3300-fp-tp-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_fp_tp";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ /* AP turns on with PP1800_VIO_OUT; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&pp3300_a>;
+ };
+
+ /* BOARD-SPECIFIC TOP LEVEL NODES */
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ pwms = <&cros_ec_pwm 1>;
+ enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+ power-supply = <&ppvar_sys>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ap_edp_bklten>;
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pen_pdct_l>;
+
+ pen-insert {
+ label = "Pen Insert";
+
+ /* Insert = low, eject = high */
+ gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+ linux,code = <SW_PEN_INSERTED>;
+ linux,input-type = <EV_SW>;
+ wakeup-source;
+ };
+ };
+
+ max98357a: audio-codec-0 {
+ compatible = "maxim,max98357a";
+ pinctrl-names = "default";
+ pinctrl-0 = <&_en>;
+ sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
+ #sound-dai-cells = <0>;
+ };
+
+ pwmleds {
+ compatible = "pwm-leds";
+ keyboard_backlight: keyboard-backlight {
+ status = "disabled";
+ label = "cros_ec::kbd_backlight";
+ pwms = <&cros_ec_pwm 0>;
+ max-brightness = <1023>;
+ };
+ };
+};
+
+&qfprom {
+ vcc-supply = <&pp1800_l11a>;
+};
+
+&qspi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+
+ /* TODO: Increase frequency after testing */
+ spi-max-frequency = <25000000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ };
+};
+
+&apps_rsc {
+ pm6150-rpmh-regulators {
+ compatible = "qcom,pm6150-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vddpx_1:
+ vdd2:
+ pp1125_s1a: smps1 {
+ regulator-min-microvolt = <1128000>;
+ regulator-max-microvolt = <1128000>;
+ };
+
+ /*
+ * pp2040_s5a (smps5) and pp1056_s4a (smps4) are just
+ * inputs to other rails on AOP-managed PMICs on trogdor.
+ * The system is already configured to manage these rails
+ * automatically (enable when needed, adjust voltage for
+ * headroom) so we won't specify anything here.
+ *
+ * NOTE: though the rails have a voltage implied by their
+ * name, the automatic headroom calculation might not result
+ * in them being that voltage. ...and that's OK.
+ * Specifically the only point of these rails is to provide
+ * an input source for other rails and if we can satisify the
+ * needs of those other rails with a lower source voltage then
+ * we save power.
+ */
+
+ pp1200_l1a: ldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp1000_l2a: ldo2 {
+ regulator-min-microvolt = <944000>;
+ regulator-max-microvolt = <1056000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp1000_l3a: ldo3 {
+ regulator-min-microvolt = <968000>;
+ regulator-max-microvolt = <1064000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_qlink_lv:
+ vdd_qlink_lv_ck:
+ vdd_qusb_hs0_core:
+ vdd_ufs1_core:
+ vdda_mipi_csi0_0p9:
+ vdda_mipi_csi1_0p9:
+ vdda_mipi_csi2_0p9:
+ vdda_mipi_csi3_0p9:
+ vdda_mipi_dsi0_pll:
+ vdda_pll_cc_ebi01:
+ vdda_qrefs_0p9:
+ vdda_usb_ss_dp_core:
+ pp900_l4a: ldo4 {
+ regulator-min-microvolt = <824000>;
+ regulator-max-microvolt = <928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp2700_l5a: ldo5 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ebi0_cal:
+ ebi1_cal:
+ vddio_ck_ebi0:
+ vddio_ck_ebi1:
+ vddio_ebi0:
+ vddq:
+ pp600_l6a: ldo6 {
+ regulator-min-microvolt = <568000>;
+ regulator-max-microvolt = <648000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_cx_wlan:
+ pp800_l9a: ldo9 {
+ regulator-min-microvolt = <488000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd1:
+ vddpx_3:
+ vddpx_7:
+ vio_in:
+ pp1800_l10a: ldo10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_qfprom:
+ vdda_apc1_cs_1p8:
+ vdda_qrefs_1p8:
+ vdda_qusb_hs0_1p8:
+ vddpx_11:
+ vreg_bb_clk:
+ pp1800_l11a: ldo11 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ mcp_vccq:
+ pp1800_l12a_r: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp1800_l13a: ldo13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp1800_prox:
+ pp1800_l14a: ldo14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp1800_alc5682:
+ pp1800_l15a: ldo15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp2700_l16a: ldo16 {
+ regulator-min-microvolt = <2496000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_qusb_hs0_3p1:
+ vdd_pdphy:
+ pp3100_l17a: ldo17 {
+ regulator-min-microvolt = <2920000>;
+ regulator-max-microvolt = <3232000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp1800_pen:
+ pp1800_l18a: ldo18 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ mcp_vcc:
+ pp2850_l19a: ldo19 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pm6150l-rpmh-regulators {
+ compatible = "qcom,pm6150l-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ pp1300_s8c: smps8 {
+ regulator-min-microvolt = <1120000>;
+ regulator-max-microvolt = <1408000>;
+ };
+
+ pp1800_l1c: ldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_wcss_adc_dac:
+ pp1300_l2c: ldo2 {
+ regulator-min-microvolt = <1168000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp1200_brij:
+ vdd_ufs1_1p2:
+ vdda_csi0_1p25:
+ vdda_csi1_1p25:
+ vdda_csi2_1p25:
+ vdda_csi3_1p25:
+ vdda_hv_ebi0:
+ vdda_mipi_dsi0_1p2:
+ vdda_usb_ss_dp_1p2:
+ vddpx_10:
+ pp1200_l3c: ldo3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ld_pp1800_esim_l4c:
+ vddpx_5:
+ pp1800_l4c: ldo4 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_6:
+ pp1800_l5c: ldo5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_2:
+ ppvar_l6c: ldo6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp3300_hub:
+ pp3300_l7c: ldo7 {
+ regulator-min-microvolt = <3304000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pp1800_brij_vccio:
+ pp1800_edp_vpll:
+ pp1800_l8c: ldo8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp2950_l9c: ldo9 {
+ regulator-min-microvolt = <2952000>;
+ regulator-max-microvolt = <2952000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp3300_l10c: ldo10 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp3300_l11c: ldo11 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ src_vreg_bob: bob {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+ };
+};
+
+&ap_ec_spi {
+ status = "okay";
+ cros_ec: ec@0 {
+ compatible = "google,cros-ec-spi";
+ reg = <0>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <94 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ap_ec_int_l>;
+ spi-max-frequency = <3000000>;
+
+ cros_ec_pwm: ec-pwm {
+ compatible = "google,cros-ec-pwm";
+ #pwm-cells = <1>;
+ };
+
+ i2c_tunnel: i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ google,remote-bus = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pdupdate {
+ compatible = "google,cros-ec-pd-update";
+ };
+
+ typec {
+ compatible = "google,cros-ec-typec";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_c0: connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ label = "left";
+ power-role = "dual";
+ data-role = "host";
+ try-power-role = "source";
+ };
+
+ usb_c1: connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ label = "right";
+ power-role = "dual";
+ data-role = "host";
+ try-power-role = "source";
+ };
+ };
+ };
+};
+
+&ap_h1_spi {
+ status = "okay";
+ cr50: tpm@0 {
+ compatible = "google,cr50";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&h1_ap_int_odl>;
+ spi-max-frequency = <800000>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <42 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&dsi0 {
+ status = "okay";
+ vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&sn65dsi86_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&dsi_phy {
+ status = "okay";
+ vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+edp_brij_i2c: &i2c2 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ sn65dsi86_bridge: bridge@2d {
+ compatible = "ti,sn65dsi86";
+ reg = <0x2d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+
+ enable-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+
+ vpll-supply = <&pp1800_edp_vpll>;
+ vccio-supply = <&pp1800_brij_vccio>;
+ vcca-supply = <&pp1200_brij>;
+ vcc-supply = <&pp1200_brij>;
+
+ clocks = <&rpmhcc RPMH_LN_BB_CLK3>;
+ clock-names = "refclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ sn65dsi86_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ sn65dsi86_out: endpoint {
+ data-lanes = <0 1>;
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+ };
+};
+
+ap_sar_sensor_i2c: &i2c5 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_sar_sensor: proximity@28 {
+ compatible = "semtech,sx9310";
+ reg = <0x28>;
+ #io-channel-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&p_sensor_int_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&pp3300_a>;
+ svdd-supply = <&pp1800_prox>;
+
+ status = "disabled";
+ label = "proximity-wifi";
+ };
+};
+
+ap_tp_i2c: &i2c7 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ trackpad@15 {
+ compatible = "elan,ekth3000";
+ reg = <0x15>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_int_1v8_odl>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+
+ vcc-supply = <&pp3300_fp_tp>;
+
+ wakeup-source;
+ };
+};
+
+hp_i2c: &i2c9 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ alc5682: codec@1a {
+ compatible = "realtek,rt5682i";
+ reg = <0x1a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_irq>;
+
+ #sound-dai-cells = <1>;
+
+ interrupt-parent = <&tlmm>;
+ /*
+ * This will get ignored because the interrupt type
+ * is set in rt5682.c.
+ */
+ interrupts = <28 IRQ_TYPE_EDGE_BOTH>;
+
+ AVDD-supply = <&pp1800_alc5682>;
+ MICVDD-supply = <&pp3300_codec>;
+ VBAT-supply = <&pp3300_audio>;
+
+ realtek,dmic1-data-pin = <1>;
+ realtek,dmic1-clk-pin = <1>;
+ realtek,jd-src = <1>;
+ };
+};
+
+&ipa {
+ status = "okay";
+
+ /*
+ * Trogdor doesn't have QHEE (Qualcomm's EL2 blob), so the
+ * modem needs to cover certain init steps (GSI init), and
+ * the AP needs to wait for it.
+ */
+ modem-init;
+};
+
+&mdp {
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&pm6150_pwrkey {
+ status = "disabled";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&remoteproc_mpss {
+ status = "okay";
+ compatible = "qcom,sc7180-mss-pil";
+ iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
+ memory-region = <&mba_mem &mpss_mem>;
+
+ /* This gets overridden for SKUs with LTE support. */
+ firmware-name = "qcom/sc7180-trogdor/modem-nolte/mba.mbn",
+ "qcom/sc7180-trogdor/modem-nolte/qdsp6sw.mbn";
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
+ vmmc-supply = <&mcp_vcc>;
+ vqmmc-supply = <&mcp_vccq>;
+};
+
+&sdhc_2 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
+ vmmc-supply = <&pp2950_l9c>;
+ vqmmc-supply = <&ppvar_l6c>;
+
+ cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+};
+
+ap_spi_fp: &spi10 {
+ cros_ec_fp: ec@0 {
+ compatible = "google,cros-ec-spi";
+ reg = <0>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>, <&fpmcu_sel>;
+ spi-max-frequency = <3000000>;
+ };
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
+
+&uart3 {
+ status = "okay";
+
+ /delete-property/interrupts;
+ interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+ <&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-1 = <&qup_uart3_sleep>;
+
+ bluetooth: bluetooth {
+ compatible = "qcom,wcn3991-bt";
+ vddio-supply = <&pp1800_l10a>;
+ vddxo-supply = <&pp1800_l1c>;
+ vddrf-supply = <&pp1300_l2c>;
+ vddch0-supply = <&pp3300_l10c>;
+ max-speed = <3200000>;
+ clocks = <&rpmhcc RPMH_RF_CLK2>;
+ };
+};
+
+&uart8 {
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+ vdd-supply = <&vdd_qusb_hs0_core>;
+ vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+ vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+ qcom,imp-res-offset-value = <8>;
+ qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
+ qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+ qcom,bias-ctrl-value = <0x22>;
+ qcom,charge-ctrl-value = <3>;
+ qcom,hsdisc-trim-value = <0>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+ vdda-phy-supply = <&vdda_usb_ss_dp_1p2>;
+ vdda-pll-supply = <&vdda_usb_ss_dp_core>;
+};
+
+&venus {
+ video-firmware {
+ iommus = <&apps_smmu 0x0c42 0x0>;
+ };
+};
+
+&wifi {
+ status = "okay";
+ vdd-0.8-cx-mx-supply = <&vdd_cx_wlan>;
+ vdd-1.8-xo-supply = <&pp1800_l1c>;
+ vdd-1.3-rfa-supply = <&pp1300_l2c>;
+ vdd-3.3-ch0-supply = <&pp3300_l10c>;
+ vdd-3.3-ch1-supply = <&pp3300_l11c>;
+
+ wifi-firmware {
+ iommus = <&apps_smmu 0xc2 0x1>;
+ };
+};
+
+/* PINCTRL - additions to nodes defined in sc7180.dtsi */
+
+&qspi_cs0 {
+ pinconf {
+ pins = "gpio68";
+ bias-disable;
+ };
+};
+
+&qspi_clk {
+ pinconf {
+ pins = "gpio63";
+ bias-disable;
+ };
+};
+
+&qspi_data01 {
+ pinconf {
+ pins = "gpio64", "gpio65";
+
+ /* High-Z when no transfers; nice to park the lines */
+ bias-pull-up;
+ };
+};
+
+&qup_i2c2_default {
+ pinconf {
+ pins = "gpio15", "gpio16";
+ drive-strength = <2>;
+
+ /* Has external pullup */
+ bias-disable;
+ };
+};
+
+&qup_i2c4_default {
+ pinconf {
+ pins = "gpio115", "gpio116";
+ drive-strength = <2>;
+
+ /* Has external pullup */
+ bias-disable;
+ };
+};
+
+&qup_i2c5_default {
+ pinconf {
+ pins = "gpio25", "gpio26";
+ drive-strength = <2>;
+
+ /* Has external pullup */
+ bias-disable;
+ };
+};
+
+&qup_i2c7_default {
+ pinconf {
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+
+ /* Has external pullup */
+ bias-disable;
+ };
+};
+
+&qup_i2c9_default {
+ pinconf {
+ pins = "gpio46", "gpio47";
+ drive-strength = <2>;
+
+ /* Has external pullup */
+ bias-disable;
+ };
+};
+
+&qup_spi0_default {
+ pinconf {
+ pins = "gpio34", "gpio35", "gpio36", "gpio37";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&qup_spi6_default {
+ pinconf {
+ pins = "gpio59", "gpio60", "gpio61", "gpio62";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&qup_spi10_default {
+ pinconf {
+ pins = "gpio86", "gpio87", "gpio88", "gpio89";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&qup_uart3_default {
+ pinconf-cts {
+ /*
+ * Configure a pull-down on CTS to match the pull of
+ * the Bluetooth module.
+ */
+ pins = "gpio38";
+ bias-pull-down;
+ };
+
+ pinconf-rts-tx {
+ /* We'll drive RTS and TX, so no pull */
+ pins = "gpio39", "gpio40";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pinconf-rx {
+ /*
+ * Configure a pull-up on RX. This is needed to avoid
+ * garbage data when the TX pin of the Bluetooth module is
+ * in tri-state (module powered off or not driving the
+ * signal yet).
+ */
+ pins = "gpio41";
+ bias-pull-up;
+ };
+};
+
+&qup_uart8_default {
+ pinconf-tx {
+ pins = "gpio44";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pinconf-rx {
+ pins = "gpio45";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&pm6150_gpio {
+ status = "disabled"; /* No GPIOs are connected */
+};
+
+&pm6150l_gpio {
+ gpio-line-names = "AP_SUSPEND",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "";
+};
+
+&tlmm {
+ /*
+ * pinctrl settings for pins that have no real owners.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&bios_flash_wp_l>, <&ap_suspend_l_neuter>;
+
+ amp_en: amp-en {
+ pinmux {
+ pins = "gpio23";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio23";
+ bias-pull-down;
+ };
+ };
+
+ ap_ec_int_l: ap-ec-int-l {
+ pinmux {
+ pins = "gpio94";
+ function = "gpio";
+ input-enable;
+ };
+
+ pinconf {
+ pins = "gpio94";
+ bias-pull-up;
+ };
+ };
+
+ ap_edp_bklten: ap-edp-bklten {
+ pinmux {
+ pins = "gpio12";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio12";
+ drive-strength = <2>;
+ bias-disable;
+
+ /* Force backlight to be disabled to match state at boot. */
+ output-low;
+ };
+ };
+
+ ap_suspend_l_neuter: ap-suspend-l-neuter {
+ pinmux {
+ pins = "gpio27";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio27";
+ bias-disable;
+ };
+ };
+
+ bios_flash_wp_l: bios-flash-wp-l {
+ pinmux {
+ pins = "gpio66";
+ function = "gpio";
+ input-enable;
+ };
+
+ pinconf {
+ pins = "gpio66";
+ bias-disable;
+ };
+ };
+
+ dp_hot_plug_det: dp-hot-plug-det {
+ pinmux {
+ pins = "gpio117";
+ function = "dp_hot";
+ };
+
+ config {
+ pins = "gpio117";
+ bias-disable;
+ input-enable;
+ drive-strength = <2>;
+ };
+ };
+
+ edp_brij_en: edp-brij-en {
+ pinmux {
+ pins = "gpio104";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio104";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ edp_brij_irq: edp-brij-irq {
+ pinmux {
+ pins = "gpio11";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio11";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ en_pp3300_codec: en-pp3300-codec {
+ pinmux {
+ pins = "gpio83";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio83";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ en_pp3300_dx_edp: en-pp3300-dx-edp {
+ pinmux {
+ pins = "gpio30";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio30";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ fpmcu_boot0: fpmcu-boot0 {
+ pinmux {
+ pins = "gpio10";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio10";
+ bias-disable;
+ drive-strength = <2>;
+ output-low;
+ };
+ };
+
+ fpmcu_sel: fpmcu-sel {
+ pinmux {
+ pins = "gpio22";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio22";
+ bias-disable;
+ drive-strength = <2>;
+ output-high;
+ };
+ };
+
+ fp_rst_l: fp-rst-l {
+ pinmux {
+ pins = "gpio5";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio5";
+ bias-disable;
+ drive-strength = <2>;
+ output-high;
+ };
+ };
+
+ fp_to_ap_irq_l: fp-to-ap-irq-l {
+ pinmux {
+ pins = "gpio4";
+ function = "gpio";
+ input-enable;
+ };
+
+ pinconf {
+ pins = "gpio4";
+
+ /* Has external pullup */
+ bias-disable;
+ };
+ };
+
+
+ h1_ap_int_odl: h1-ap-int-odl {
+ pinmux {
+ pins = "gpio42";
+ function = "gpio";
+ input-enable;
+ };
+
+ pinconf {
+ pins = "gpio42";
+ bias-pull-up;
+ };
+ };
+
+ hp_irq: hp-irq {
+ pinmux {
+ pins = "gpio28";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio28";
+ bias-pull-up;
+ };
+ };
+
+ pen_irq_l: pen-irq-l {
+ pinmux {
+ pins = "gpio21";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio21";
+
+ /* Has external pullup */
+ bias-disable;
+ };
+ };
+
+ pen_pdct_l: pen-pdct-l {
+ pinmux {
+ pins = "gpio52";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio52";
+
+ /* Has external pullup */
+ bias-disable;
+ };
+ };
+
+ pen_rst_odl: pen-rst-odl {
+ pinmux {
+ pins = "gpio18";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio18";
+ bias-disable;
+ drive-strength = <2>;
+
+ /*
+ * The pen driver doesn't currently support
+ * driving this reset line. By specifying
+ * output-high here we're relying on the fact
+ * that this pin has a default pulldown at boot
+ * (which makes sure the pen was in reset if it
+ * was powered) and then we set it high here to
+ * take it out of reset. Better would be if the
+ * pen driver could control this and we could
+ * remove "output-high" here.
+ */
+ output-high; /* TODO: Remove this? */
+ };
+ };
+
+ p_sensor_int_l: p-sensor-int-l {
+ pinmux {
+ pins = "gpio24";
+ function = "gpio";
+ input-enable;
+ };
+
+ pinconf {
+ pins = "gpio24";
+ bias-pull-up;
+ };
+ };
+
+ qup_uart3_sleep: qup-uart3-sleep {
+ pinmux {
+ pins = "gpio38", "gpio39",
+ "gpio40", "gpio41";
+ function = "gpio";
+ };
+
+ pinconf-cts {
+ /*
+ * Configure a pull-down on CTS to match the pull of
+ * the Bluetooth module.
+ */
+ pins = "gpio38";
+ bias-pull-down;
+ };
+
+ pinconf-rts {
+ /*
+ * Configure pull-down on RTS. As RTS is active low
+ * signal, pull it low to indicate the BT SoC that it
+ * can wakeup the system anytime from suspend state by
+ * pulling RX low (by sending wakeup bytes).
+ */
+ pins = "gpio39";
+ bias-pull-down;
+ };
+
+ pinconf-tx {
+ /*
+ * Configure pull-up on TX when it isn't actively driven
+ * to prevent BT SoC from receiving garbage during sleep.
+ */
+ pins = "gpio40";
+ bias-pull-up;
+ };
+
+ pinconf-rx {
+ /*
+ * Configure a pull-up on RX. This is needed to avoid
+ * garbage data when the TX pin of the Bluetooth module
+ * is floating which may cause spurious wakeups.
+ */
+ pins = "gpio41";
+ bias-pull-up;
+ };
+ };
+
+ trackpad_int_1v8_odl: trackpad-int-1v8-odl {
+ pinmux {
+ pins = "gpio58";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio58";
+
+ /* Has external pullup */
+ bias-disable;
+ };
+ };
+
+ ts_int_l: ts-int-l {
+ pinmux {
+ pins = "gpio9";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio9";
+ bias-pull-up;
+ };
+ };
+
+ ts_reset_l: ts-reset-l {
+ pinmux {
+ pins = "gpio8";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio8";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index d46b383..6678f1e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/clock/qcom,dispcc-sc7180.h>
#include <dt-bindings/clock/qcom,gcc-sc7180.h>
#include <dt-bindings/clock/qcom,gpucc-sc7180.h>
+#include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,videocc-sc7180.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
@@ -132,7 +133,7 @@ &LITTLE_CPU_SLEEP_1
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
next-level-cache = <&L2_0>;
#cooling-cells = <2>;
@@ -158,7 +159,7 @@ &LITTLE_CPU_SLEEP_1
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_100>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -180,7 +181,7 @@ &LITTLE_CPU_SLEEP_1
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_200>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -202,7 +203,7 @@ &LITTLE_CPU_SLEEP_1
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_300>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -224,7 +225,7 @@ &LITTLE_CPU_SLEEP_1
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_400>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -246,7 +247,7 @@ &LITTLE_CPU_SLEEP_1
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_500>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -268,7 +269,7 @@ &BIG_CPU_SLEEP_1
dynamic-power-coefficient = <405>;
next-level-cache = <&L2_600>;
operating-points-v2 = <&cpu6_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 1>;
@@ -290,7 +291,7 @@ &BIG_CPU_SLEEP_1
dynamic-power-coefficient = <405>;
next-level-cache = <&L2_700>;
operating-points-v2 = <&cpu6_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 1>;
@@ -690,6 +691,9 @@ sdhc_1: sdhci@7c4000 {
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>;
clock-names = "core", "iface";
+ interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>;
+ interconnect-names = "sdhc-ddr","cpu-sdhc";
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&sdhc1_opp_table>;
@@ -710,11 +714,15 @@ sdhc1_opp_table: sdhc1-opp-table {
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_low_svs>;
+ opp-peak-kBps = <100000 100000>;
+ opp-avg-kBps = <100000 50000>;
};
opp-384000000 {
opp-hz = /bits/ 64 <384000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
+ opp-peak-kBps = <600000 900000>;
+ opp-avg-kBps = <261438 300000>;
};
};
};
@@ -748,7 +756,7 @@ qupv3_id_0: geniqup@8c0000 {
#size-cells = <2>;
ranges;
iommus = <&apps_smmu 0x43 0x0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>;
interconnect-names = "qup-core";
status = "disabled";
@@ -762,9 +770,9 @@ i2c0: i2c@880000 {
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
- <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -782,8 +790,8 @@ spi0: spi@880000 {
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -798,8 +806,8 @@ uart0: serial@880000 {
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -814,9 +822,9 @@ i2c1: i2c@884000 {
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
- <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -834,8 +842,8 @@ spi1: spi@884000 {
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -850,8 +858,8 @@ uart1: serial@884000 {
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -866,9 +874,9 @@ i2c2: i2c@888000 {
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
- <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -884,8 +892,8 @@ uart2: serial@888000 {
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -900,9 +908,9 @@ i2c3: i2c@88c000 {
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
- <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -920,8 +928,8 @@ spi3: spi@88c000 {
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -936,8 +944,8 @@ uart3: serial@88c000 {
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -952,9 +960,9 @@ i2c4: i2c@890000 {
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
- <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -970,8 +978,8 @@ uart4: serial@890000 {
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -986,9 +994,9 @@ i2c5: i2c@894000 {
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
- <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -1006,8 +1014,8 @@ spi5: spi@894000 {
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1022,8 +1030,8 @@ uart5: serial@894000 {
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1039,7 +1047,7 @@ qupv3_id_1: geniqup@ac0000 {
#size-cells = <2>;
ranges;
iommus = <&apps_smmu 0x4c3 0x0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>;
interconnect-names = "qup-core";
status = "disabled";
@@ -1053,9 +1061,9 @@ i2c6: i2c@a80000 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
- <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -1073,8 +1081,8 @@ spi6: spi@a80000 {
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1089,8 +1097,8 @@ uart6: serial@a80000 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1105,9 +1113,9 @@ i2c7: i2c@a84000 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
- <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -1123,8 +1131,8 @@ uart7: serial@a84000 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1139,9 +1147,9 @@ i2c8: i2c@a88000 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
- <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -1159,8 +1167,8 @@ spi8: spi@a88000 {
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1175,8 +1183,8 @@ uart8: serial@a88000 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1191,9 +1199,9 @@ i2c9: i2c@a8c000 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
- <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -1209,8 +1217,8 @@ uart9: serial@a8c000 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1225,9 +1233,9 @@ i2c10: i2c@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
- <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -1245,8 +1253,8 @@ spi10: spi@a90000 {
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1261,8 +1269,8 @@ uart10: serial@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1277,9 +1285,9 @@ i2c11: i2c@a94000 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
- <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
status = "disabled";
@@ -1297,8 +1305,8 @@ spi11: spi@a94000 {
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1313,8 +1321,8 @@ uart11: serial@a94000 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1323,63 +1331,63 @@ uart11: serial@a94000 {
config_noc: interconnect@1500000 {
compatible = "qcom,sc7180-config-noc";
reg = <0 0x01500000 0 0x28000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
system_noc: interconnect@1620000 {
compatible = "qcom,sc7180-system-noc";
reg = <0 0x01620000 0 0x17080>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mc_virt: interconnect@1638000 {
compatible = "qcom,sc7180-mc-virt";
reg = <0 0x01638000 0 0x1000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
qup_virt: interconnect@1650000 {
compatible = "qcom,sc7180-qup-virt";
reg = <0 0x01650000 0 0x1000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre1_noc: interconnect@16e0000 {
compatible = "qcom,sc7180-aggre1-noc";
reg = <0 0x016e0000 0 0x15080>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre2_noc: interconnect@1705000 {
compatible = "qcom,sc7180-aggre2-noc";
reg = <0 0x01705000 0 0x9000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
compute_noc: interconnect@170e000 {
compatible = "qcom,sc7180-compute-noc";
reg = <0 0x0170e000 0 0x6000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mmss_noc: interconnect@1740000 {
compatible = "qcom,sc7180-mmss-noc";
reg = <0 0x01740000 0 0x1c100>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
ipa_virt: interconnect@1e00000 {
compatible = "qcom,sc7180-ipa-virt";
reg = <0 0x01e00000 0 0x1000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
@@ -1406,9 +1414,9 @@ ipa: ipa@1e40000 {
clocks = <&rpmhcc RPMH_IPA_CLK>;
clock-names = "core";
- interconnects = <&aggre2_noc MASTER_IPA &mc_virt SLAVE_EBI1>,
- <&aggre2_noc MASTER_IPA &system_noc SLAVE_IMEM>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>;
+ interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+ <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
interconnect-names = "memory",
"imem",
"config";
@@ -1447,6 +1455,19 @@ tlmm: pinctrl@3500000 {
gpio-ranges = <&tlmm 0 0 120>;
wakeup-parent = <&pdc>;
+ dp_hot_plug_det: dp-hot-plug-det {
+ pinmux {
+ pins = "gpio117";
+ function = "dp_hot";
+ };
+
+ pinconf {
+ pins = "gpio117";
+ bias-disable;
+ input-enable;
+ };
+ };
+
qspi_clk: qspi-clk {
pinmux {
pins = "gpio63";
@@ -1886,7 +1907,7 @@ gpu: gpu@5000000 {
operating-points-v2 = <&gpu_opp_table>;
qcom,gmu = <&gmu>;
- interconnects = <&gem_noc MASTER_GFX3D &mc_virt SLAVE_EBI1>;
+ interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "gfx-mem";
gpu_opp_table: opp-table {
@@ -2502,6 +2523,10 @@ sdhc_2: sdhci@8804000 {
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
<&gcc GCC_SDCC2_AHB_CLK>;
clock-names = "core", "iface";
+
+ interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+ interconnect-names = "sdhc-ddr","cpu-sdhc";
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&sdhc2_opp_table>;
@@ -2515,11 +2540,15 @@ sdhc2_opp_table: sdhc2-opp-table {
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_low_svs>;
+ opp-peak-kBps = <160000 100000>;
+ opp-avg-kBps = <80000 50000>;
};
opp-202000000 {
opp-hz = /bits/ 64 <202000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
+ opp-peak-kBps = <200000 120000>;
+ opp-avg-kBps = <100000 60000>;
};
};
};
@@ -2552,8 +2581,8 @@ qspi: spi@88dc000 {
clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
<&gcc GCC_QSPI_CORE_CLK>;
clock-names = "iface", "core";
- interconnects = <&gem_noc MASTER_APPSS_PROC
- &config_noc SLAVE_QSPI_0>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC 0
+ &config_noc SLAVE_QSPI_0 0>;
interconnect-names = "qspi-config";
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qspi_opp_table>;
@@ -2612,13 +2641,13 @@ usb_1_ssphy: phy@88e9200 {
dc_noc: interconnect@9160000 {
compatible = "qcom,sc7180-dc-noc";
reg = <0 0x09160000 0 0x03200>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
system-cache-controller@9200000 {
compatible = "qcom,sc7180-llcc";
- reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>;
+ reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
reg-names = "llcc_base", "llcc_broadcast_base";
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -2626,14 +2655,14 @@ system-cache-controller@9200000 {
gem_noc: interconnect@9680000 {
compatible = "qcom,sc7180-gem-noc";
reg = <0 0x09680000 0 0x3e200>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
npu_noc: interconnect@9990000 {
compatible = "qcom,sc7180-npu-noc";
reg = <0 0x09990000 0 0x1600>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
@@ -2669,8 +2698,8 @@ usb_1: usb@a6f8800 {
resets = <&gcc GCC_USB30_PRIM_BCR>;
- interconnects = <&aggre2_noc MASTER_USB3 &mc_virt SLAVE_EBI1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3>;
+ interconnects = <&aggre2_noc MASTER_USB3 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
interconnect-names = "usb-ddr", "apps-usb";
usb_1_dwc3: dwc3@a600000 {
@@ -2691,8 +2720,10 @@ venus: video-codec@aa00000 {
reg = <0 0x0aa00000 0 0xff000>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&videocc VENUS_GDSC>,
- <&videocc VCODEC0_GDSC>;
- power-domain-names = "venus", "vcodec0";
+ <&videocc VCODEC0_GDSC>,
+ <&rpmhpd SC7180_CX>;
+ power-domain-names = "venus", "vcodec0", "cx";
+ operating-points-v2 = <&venus_opp_table>;
clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
<&videocc VIDEO_CC_VENUS_AHB_CLK>,
<&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
@@ -2702,8 +2733,8 @@ venus: video-codec@aa00000 {
"vcodec0_core", "vcodec0_bus";
iommus = <&apps_smmu 0x0c00 0x60>;
memory-region = <&venus_mem>;
- interconnects = <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_VENUS_CFG>;
+ interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>;
interconnect-names = "video-mem", "cpu-cfg";
video-decoder {
@@ -2713,6 +2744,35 @@ video-decoder {
video-encoder {
compatible = "venus-encoder";
};
+
+ venus_opp_table: venus-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-150000000 {
+ opp-hz = /bits/ 64 <150000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-340000000 {
+ opp-hz = /bits/ 64 <340000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-434000000 {
+ opp-hz = /bits/ 64 <434000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+
+ opp-500000097 {
+ opp-hz = /bits/ 64 <500000097>;
+ required-opps = <&rpmhpd_opp_turbo>;
+ };
+ };
};
videocc: clock-controller@ab00000 {
@@ -2728,7 +2788,7 @@ videocc: clock-controller@ab00000 {
camnoc_virt: interconnect@ac00000 {
compatible = "qcom,sc7180-camnoc-virt";
reg = <0 0x0ac00000 0 0x1000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
@@ -2740,10 +2800,9 @@ mdss: mdss@ae00000 {
power-domains = <&dispcc MDSS_GDSC>;
clocks = <&gcc GCC_DISP_AHB_CLK>,
- <&gcc GCC_DISP_HF_AXI_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>;
- clock-names = "iface", "bus", "ahb", "core";
+ clock-names = "iface", "ahb", "core";
assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
assigned-clock-rates = <300000000>;
@@ -2752,6 +2811,9 @@ mdss: mdss@ae00000 {
interrupt-controller;
#interrupt-cells = <1>;
+ interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
+ interconnect-names = "mdp0-mem";
+
iommus = <&apps_smmu 0x800 0x2>;
#address-cells = <2>;
@@ -2766,12 +2828,13 @@ mdp: mdp@ae01000 {
<0 0x0aeb0000 0 0x2008>;
reg-names = "mdp", "vbif";
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_ROT_CLK>,
<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
- clock-names = "iface", "rot", "lut", "core",
+ clock-names = "bus", "iface", "rot", "lut", "core",
"vsync";
assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>,
@@ -2785,7 +2848,7 @@ mdp: mdp@ae01000 {
power-domains = <&rpmhpd SC7180_CX>;
interrupt-parent = <&mdss>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0>;
status = "disabled";
@@ -2833,7 +2896,7 @@ dsi0: dsi@ae94000 {
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <4>;
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
@@ -3312,6 +3375,29 @@ wifi: wifi@18800000 {
qcom,msa-fixed-perm;
status = "disabled";
};
+
+ lpasscc: clock-controller@62d00000 {
+ compatible = "qcom,sc7180-lpasscorecc";
+ reg = <0 0x62d00000 0 0x50000>,
+ <0 0x62780000 0 0x30000>;
+ reg-names = "lpass_core_cc", "lpass_audio_cc";
+ clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "bi_tcxo";
+ power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ lpass_hm: clock-controller@63000000 {
+ compatible = "qcom,sc7180-lpasshm";
+ reg = <0 0x63000000 0 0x28>;
+ clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "bi_tcxo";
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ };
};
thermal-zones {
@@ -3320,6 +3406,7 @@ cpu0-thermal {
polling-delay = <0>;
thermal-sensors = <&tsens0 1>;
+ sustainable-power = <768>;
trips {
cpu0_alert0: trip-point0 {
@@ -3368,6 +3455,7 @@ cpu1-thermal {
polling-delay = <0>;
thermal-sensors = <&tsens0 2>;
+ sustainable-power = <768>;
trips {
cpu1_alert0: trip-point0 {
@@ -3416,6 +3504,7 @@ cpu2-thermal {
polling-delay = <0>;
thermal-sensors = <&tsens0 3>;
+ sustainable-power = <768>;
trips {
cpu2_alert0: trip-point0 {
@@ -3464,6 +3553,7 @@ cpu3-thermal {
polling-delay = <0>;
thermal-sensors = <&tsens0 4>;
+ sustainable-power = <768>;
trips {
cpu3_alert0: trip-point0 {
@@ -3512,6 +3602,7 @@ cpu4-thermal {
polling-delay = <0>;
thermal-sensors = <&tsens0 5>;
+ sustainable-power = <768>;
trips {
cpu4_alert0: trip-point0 {
@@ -3560,6 +3651,7 @@ cpu5-thermal {
polling-delay = <0>;
thermal-sensors = <&tsens0 6>;
+ sustainable-power = <768>;
trips {
cpu5_alert0: trip-point0 {
@@ -3608,6 +3700,7 @@ cpu6-thermal {
polling-delay = <0>;
thermal-sensors = <&tsens0 9>;
+ sustainable-power = <1202>;
trips {
cpu6_alert0: trip-point0 {
@@ -3648,6 +3741,7 @@ cpu7-thermal {
polling-delay = <0>;
thermal-sensors = <&tsens0 10>;
+ sustainable-power = <1202>;
trips {
cpu7_alert0: trip-point0 {
@@ -3688,6 +3782,7 @@ cpu8-thermal {
polling-delay = <0>;
thermal-sensors = <&tsens0 11>;
+ sustainable-power = <1202>;
trips {
cpu8_alert0: trip-point0 {
@@ -3728,6 +3823,7 @@ cpu9-thermal {
polling-delay = <0>;
thermal-sensors = <&tsens0 12>;
+ sustainable-power = <1202>;
trips {
cpu9_alert0: trip-point0 {
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 88efe82..deb928d 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -518,6 +518,8 @@ anoc2_smmu: iommu@16c0000 {
<GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
};
tcsr_mutex_regs: syscon@1f40000 {
@@ -749,6 +751,8 @@ kgsl_smmu: iommu@5040000 {
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
};
lpass_smmu: iommu@5100000 {
@@ -778,6 +782,8 @@ lpass_smmu: iommu@5100000 {
<GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
};
spmi_bus: spmi@800f000 {
@@ -1074,6 +1080,8 @@ mmss_smmu: iommu@cd00000 {
<GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
};
apcs_glb: mailbox@17911000 {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index a2a9868..7cc2365 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -451,16 +451,16 @@ ports {
port@0 {
reg = <0>;
- lt9611_out: endpoint {
- remote-endpoint = <&hdmi_con>;
+ lt9611_a: endpoint {
+ remote-endpoint = <&dsi0_out>;
};
};
- port@1 {
- reg = <1>;
+ port@2 {
+ reg = <2>;
- lt9611_a: endpoint {
- remote-endpoint = <&dsi0_out>;
+ lt9611_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
};
};
};
@@ -1103,7 +1103,7 @@ &pm8998_gpio {
};
&cci {
- status = "ok";
+ status = "okay";
};
&cci_i2c0 {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
new file mode 100644
index 0000000..86cbae6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
@@ -0,0 +1,380 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/*
+ * Delete following upstream (sdm845.dtsi) reserved
+ * memory mappings which are different in this device.
+ */
+/delete-node/ &tz_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &wlan_msa_mem;
+/delete-node/ &mpss_region;
+/delete-node/ &venus_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &mba_region;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &rmtfs_mem;
+
+/ {
+ model = "Xiaomi Pocophone F1";
+ compatible = "xiaomi,beryllium", "qcom,sdm845";
+
+ /* required for bootloader to select correct board */
+ qcom,board-id = <69 0>;
+ qcom,msm-id = <321 0x20001>;
+
+ aliases {
+ hsuart0 = &uart6;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vol_up_pin_a>;
+
+ vol-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ /* Reserved memory changes from downstream */
+ reserved-memory {
+ tz_mem: memory@86200000 {
+ reg = <0 0x86200000 0 0x4900000>;
+ no-map;
+ };
+
+ adsp_mem: memory@8c500000 {
+ reg = <0 0x8c500000 0 0x1e00000>;
+ no-map;
+ };
+
+ wlan_msa_mem: memory@8e300000 {
+ reg = <0 0x8e300000 0 0x100000>;
+ no-map;
+ };
+
+ mpss_region: memory@8e400000 {
+ reg = <0 0x8e400000 0 0x7800000>;
+ no-map;
+ };
+
+ venus_mem: memory@95c00000 {
+ reg = <0 0x95c00000 0 0x500000>;
+ no-map;
+ };
+
+ cdsp_mem: memory@96100000 {
+ reg = <0 0x96100000 0 0x800000>;
+ no-map;
+ };
+
+ mba_region: memory@96900000 {
+ reg = <0 0x96900000 0 0x200000>;
+ no-map;
+ };
+
+ slpi_mem: memory@96b00000 {
+ reg = <0 0x96b00000 0 0x1400000>;
+ no-map;
+ };
+
+ spss_mem: memory@97f00000 {
+ reg = <0 0x97f00000 0 0x100000>;
+ no-map;
+ };
+
+ rmtfs_mem: memory@f6301000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0 0xf6301000 0 0x200000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
+ };
+ };
+
+ vreg_s4a_1p8: vreg-s4a-1p8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+};
+
+&adsp_pas {
+ status = "okay";
+ firmware-name = "qcom/sdm845/adsp.mdt";
+};
+
+&apps_rsc {
+ pm8998-rpmh-regulators {
+ compatible = "qcom,pm8998-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vreg_l1a_0p875: ldo1 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a_0p8: ldo5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12a_1p8: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13a_2p95: ldo13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_1p3: ldo17 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l20a_2p95: ldo20 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2968000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l21a_2p95: ldo21 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2968000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l24a_3p075: ldo24 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l25a_3p3: ldo25 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l26a_1p2: ldo26 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&cdsp_pas {
+ status = "okay";
+ firmware-name = "qcom/sdm845/cdsp.mdt";
+};
+
+&gcc {
+ protected-clocks = <GCC_QSPI_CORE_CLK>,
+ <GCC_QSPI_CORE_CLK_SRC>,
+ <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+ <GCC_LPASS_Q6_AXI_CLK>,
+ <GCC_LPASS_SWAY_CLK>;
+};
+
+&gpu {
+ zap-shader {
+ memory-region = <&gpu_mem>;
+ firmware-name = "qcom/sdm845/a630_zap.mbn";
+ };
+};
+
+&mss_pil {
+ status = "okay";
+ firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mdt";
+};
+
+&pm8998_gpio {
+ vol_up_pin_a: vol-up-active {
+ pins = "gpio6";
+ function = "normal";
+ input-enable;
+ bias-pull-up;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ };
+};
+
+&pm8998_pon {
+ resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+
+ vmmc-supply = <&vreg_l21a_2p95>;
+ vqmmc-supply = <&vreg_l13a_2p95>;
+
+ bus-width = <4>;
+ cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>, <81 4>;
+
+ sdc2_default_state: sdc2-default {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+
+ sdc2_card_det_n: sd-card-det-n {
+ pins = "gpio126";
+ function = "gpio";
+ bias-pull-up;
+ };
+};
+
+&uart6 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn3990-bt";
+
+ vddio-supply = <&vreg_s4a_1p8>;
+ vddxo-supply = <&vreg_l7a_1p8>;
+ vddrf-supply = <&vreg_l17a_1p3>;
+ vddch0-supply = <&vreg_l25a_3p3>;
+ max-speed = <3200000>;
+ };
+};
+
+&ufs_mem_hc {
+ status = "okay";
+
+ reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l20a_2p95>;
+ vcc-max-microamp = <800000>;
+};
+
+&ufs_mem_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l1a_0p875>;
+ vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+
+ vdd-supply = <&vreg_l1a_0p875>;
+ vdda-pll-supply = <&vreg_l12a_1p8>;
+ vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+
+ qcom,imp-res-offset-value = <8>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+ qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+ qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l26a_1p2>;
+ vdda-pll-supply = <&vreg_l1a_0p875>;
+};
+
+&wifi {
+ status = "okay";
+
+ vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+ vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+
+&qup_uart6_default {
+ pinmux {
+ pins = "gpio45", "gpio46", "gpio47", "gpio48";
+ function = "qup6";
+ };
+
+ cts {
+ pins = "gpio45";
+ bias-disable;
+ };
+
+ rts-tx {
+ pins = "gpio46", "gpio47";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio48";
+ bias-pull-up;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 2884577..40e8c11 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -200,7 +200,7 @@ &LITTLE_CPU_SLEEP_1
dynamic-power-coefficient = <100>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+ interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_0>;
@@ -225,7 +225,7 @@ &LITTLE_CPU_SLEEP_1
dynamic-power-coefficient = <100>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+ interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_100>;
@@ -247,7 +247,7 @@ &LITTLE_CPU_SLEEP_1
dynamic-power-coefficient = <100>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+ interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_200>;
@@ -269,7 +269,7 @@ &LITTLE_CPU_SLEEP_1
dynamic-power-coefficient = <100>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+ interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_300>;
@@ -291,7 +291,7 @@ &BIG_CPU_SLEEP_1
dynamic-power-coefficient = <396>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
- interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+ interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_400>;
@@ -313,7 +313,7 @@ &BIG_CPU_SLEEP_1
dynamic-power-coefficient = <396>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
- interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+ interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_500>;
@@ -335,7 +335,7 @@ &BIG_CPU_SLEEP_1
dynamic-power-coefficient = <396>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
- interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+ interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_600>;
@@ -357,7 +357,7 @@ &BIG_CPU_SLEEP_1
dynamic-power-coefficient = <396>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
- interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+ interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_700>;
@@ -1093,8 +1093,8 @@ rng: rng@793000 {
qup_opp_table: qup-opp-table {
compatible = "operating-points-v2";
- opp-19200000 {
- opp-hz = /bits/ 64 <19200000>;
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
required-opps = <&rpmhpd_opp_min_svs>;
};
@@ -1107,6 +1107,11 @@ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_svs>;
};
+
+ opp-128000000 {
+ opp-hz = /bits/ 64 <128000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
};
qupv3_id_0: geniqup@8c0000 {
@@ -2011,49 +2016,49 @@ pcie1_lane: lanes@1c06200 {
mem_noc: interconnect@1380000 {
compatible = "qcom,sdm845-mem-noc";
reg = <0 0x01380000 0 0x27200>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
dc_noc: interconnect@14e0000 {
compatible = "qcom,sdm845-dc-noc";
reg = <0 0x014e0000 0 0x400>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
config_noc: interconnect@1500000 {
compatible = "qcom,sdm845-config-noc";
reg = <0 0x01500000 0 0x5080>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
system_noc: interconnect@1620000 {
compatible = "qcom,sdm845-system-noc";
reg = <0 0x01620000 0 0x18080>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre1_noc: interconnect@16e0000 {
compatible = "qcom,sdm845-aggre1-noc";
reg = <0 0x016e0000 0 0x15080>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre2_noc: interconnect@1700000 {
compatible = "qcom,sdm845-aggre2-noc";
reg = <0 0x01700000 0 0x1f300>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mmss_noc: interconnect@1740000 {
compatible = "qcom,sdm845-mmss-noc";
reg = <0 0x01740000 0 0x1c100>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
@@ -2156,9 +2161,9 @@ ipa: ipa@1e40000 {
clocks = <&rpmhcc RPMH_IPA_CLK>;
clock-names = "core";
- interconnects = <&aggre2_noc MASTER_IPA &mem_noc SLAVE_EBI1>,
- <&aggre2_noc MASTER_IPA &system_noc SLAVE_IMEM>,
- <&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>;
+ interconnects = <&aggre2_noc MASTER_IPA 0 &mem_noc SLAVE_EBI1 0>,
+ <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
interconnect-names = "memory",
"imem",
"config";
@@ -3569,8 +3574,8 @@ usb_1: usb@a6f8800 {
resets = <&gcc GCC_USB30_PRIM_BCR>;
- interconnects = <&aggre2_noc MASTER_USB3_0 &mem_noc SLAVE_EBI1>,
- <&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3_0>;
+ interconnects = <&aggre2_noc MASTER_USB3_0 0 &mem_noc SLAVE_EBI1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
interconnect-names = "usb-ddr", "apps-usb";
usb_1_dwc3: dwc3@a600000 {
@@ -3617,8 +3622,8 @@ usb_2: usb@a8f8800 {
resets = <&gcc GCC_USB30_SEC_BCR>;
- interconnects = <&aggre2_noc MASTER_USB3_1 &mem_noc SLAVE_EBI1>,
- <&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3_1>;
+ interconnects = <&aggre2_noc MASTER_USB3_1 0 &mem_noc SLAVE_EBI1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
interconnect-names = "usb-ddr", "apps-usb";
usb_2_dwc3: dwc3@a800000 {
@@ -3639,8 +3644,10 @@ venus: video-codec@aa00000 {
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&videocc VENUS_GDSC>,
<&videocc VCODEC0_GDSC>,
- <&videocc VCODEC1_GDSC>;
- power-domain-names = "venus", "vcodec0", "vcodec1";
+ <&videocc VCODEC1_GDSC>,
+ <&rpmhpd SDM845_CX>;
+ power-domain-names = "venus", "vcodec0", "vcodec1", "cx";
+ operating-points-v2 = <&venus_opp_table>;
clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
<&videocc VIDEO_CC_VENUS_AHB_CLK>,
<&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
@@ -3662,6 +3669,40 @@ video-core0 {
video-core1 {
compatible = "venus-encoder";
};
+
+ venus_opp_table: venus-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-320000000 {
+ opp-hz = /bits/ 64 <320000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-380000000 {
+ opp-hz = /bits/ 64 <380000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-444000000 {
+ opp-hz = /bits/ 64 <444000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+
+ opp-533000097 {
+ opp-hz = /bits/ 64 <533000097>;
+ required-opps = <&rpmhpd_opp_turbo>;
+ };
+ };
};
videocc: clock-controller@ab00000 {
@@ -3777,6 +3818,10 @@ mdss: mdss@ae00000 {
interrupt-controller;
#interrupt-cells = <1>;
+ interconnects = <&mmss_noc MASTER_MDP0 0 &mem_noc SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_MDP1 0 &mem_noc SLAVE_EBI1 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
iommus = <&apps_smmu 0x880 0x8>,
<&apps_smmu 0xc80 0x8>;
@@ -4007,7 +4052,7 @@ gpu: gpu@5000000 {
qcom,gmu = <&gmu>;
- interconnects = <&mem_noc MASTER_GFX3D &mem_noc SLAVE_EBI1>;
+ interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "gfx-mem";
gpu_opp_table: opp-table {
@@ -4324,7 +4369,7 @@ lpasscc: clock-controller@17014000 {
gladiator_noc: interconnect@17900000 {
compatible = "qcom,sdm845-gladiator-noc";
reg = <0 0x17900000 0 0xd080>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index b86a7ea..f0a872e 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -10,6 +10,8 @@
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,gcc-sm8150.h>
+#include <dt-bindings/clock/qcom,gpucc-sm8150.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/thermal/thermal.h>
/ {
@@ -439,6 +441,55 @@ uart2: serial@a90000 {
};
};
+ config_noc: interconnect@1500000 {
+ compatible = "qcom,sm8150-config-noc";
+ reg = <0 0x01500000 0 0x7400>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ system_noc: interconnect@1620000 {
+ compatible = "qcom,sm8150-system-noc";
+ reg = <0 0x01620000 0 0x19400>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mc_virt: interconnect@163a000 {
+ compatible = "qcom,sm8150-mc-virt";
+ reg = <0 0x0163a000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre1_noc: interconnect@16e0000 {
+ compatible = "qcom,sm8150-aggre1-noc";
+ reg = <0 0x016e0000 0 0xd080>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre2_noc: interconnect@1700000 {
+ compatible = "qcom,sm8150-aggre2-noc";
+ reg = <0 0x01700000 0 0x20000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ compute_noc: interconnect@1720000 {
+ compatible = "qcom,sm8150-compute-noc";
+ reg = <0 0x01720000 0 0x7000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mmss_noc: interconnect@1740000 {
+ compatible = "qcom,sm8150-mmss-noc";
+ reg = <0 0x01740000 0 0x1c100>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
ufs_mem_hc: ufshc@1d84000 {
compatible = "qcom,sm8150-ufshc", "qcom,ufshc",
"jedec,ufs-2.0";
@@ -507,6 +558,13 @@ ufs_mem_phy_lanes: lanes@1d87400 {
};
};
+ ipa_virt: interconnect@1e00000 {
+ compatible = "qcom,sm8150-ipa-virt";
+ reg = <0 0x01e00000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
tcsr_mutex_regs: syscon@1f40000 {
compatible = "syscon";
reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -621,15 +679,15 @@ gmu: gmu@2c6a000 {
<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hfi", "gmu";
- clocks = <&gpucc 0>,
- <&gpucc 3>,
- <&gpucc 6>,
+ clocks = <&gpucc GPU_CC_AHB_CLK>,
+ <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_CXO_CLK>,
<&gcc GCC_DDRSS_GPU_AXI_CLK>,
<&gcc GCC_GPU_MEMNOC_GFX_CLK>;
clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
- power-domains = <&gpucc 0>,
- <&gpucc 1>;
+ power-domains = <&gpucc GPU_CX_GDSC>,
+ <&gpucc GPU_GX_GDSC>;
power-domain-names = "cx", "gx";
iommus = <&adreno_smmu 5 0x400>;
@@ -674,12 +732,12 @@ adreno_smmu: iommu@2ca0000 {
<GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gpucc 0>,
+ clocks = <&gpucc GPU_CC_AHB_CLK>,
<&gcc GCC_GPU_MEMNOC_GFX_CLK>,
<&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
clock-names = "ahb", "bus", "iface";
- power-domains = <&gpucc 0>;
+ power-domains = <&gpucc GPU_CX_GDSC>;
};
tlmm: pinctrl@3100000 {
@@ -767,7 +825,7 @@ glink-edge {
usb_1_hsphy: phy@88e2000 {
compatible = "qcom,sm8150-usb-hs-phy",
- "qcom,usb-snps-hs-7nm-phy";
+ "qcom,usb-snps-hs-7nm-phy";
reg = <0 0x088e2000 0 0x400>;
status = "disabled";
#phy-cells = <0>;
@@ -813,6 +871,20 @@ usb_1_ssphy: lanes@88e9200 {
};
};
+ dc_noc: interconnect@9160000 {
+ compatible = "qcom,sm8150-dc-noc";
+ reg = <0 0x09160000 0 0x3200>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ gem_noc: interconnect@9680000 {
+ compatible = "qcom,sm8150-gem-noc";
+ reg = <0 0x09680000 0 0x3e200>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
usb_1: usb@a6f8800 {
compatible = "qcom,sm8150-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
@@ -833,7 +905,7 @@ usb_1: usb@a6f8800 {
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <150000000>;
+ assigned-clock-rates = <19200000>, <200000000>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
@@ -857,6 +929,13 @@ usb_1_dwc3: dwc3@a600000 {
};
};
+ camnoc_virt: interconnect@ac00000 {
+ compatible = "qcom,sm8150-camnoc-virt";
+ reg = <0 0x0ac00000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
aoss_qmp: power-controller@c300000 {
compatible = "qcom,sm8150-aoss-qmp";
reg = <0x0 0x0c300000 0x0 0x100000>;
@@ -1099,6 +1178,20 @@ rpmhpd_opp_turbo_l1: opp11 {
};
};
};
+
+ apps_bcm_voter: bcm_voter {
+ compatible = "qcom,bcm-voter";
+ };
+ };
+
+ osm_l3: interconnect@18321000 {
+ compatible = "qcom,sm8150-osm-l3";
+ reg = <0 0x18321000 0 0x1400>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+ clock-names = "xo", "alternate";
+
+ #interconnect-cells = <1>;
};
cpufreq_hw: cpufreq@18323000 {
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 6894f84..fd194ed 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -17,7 +17,7 @@ / {
compatible = "qcom,sm8250-mtp";
aliases {
- serial0 = &uart2;
+ serial0 = &uart12;
};
chosen {
@@ -358,10 +358,38 @@ &cdsp {
firmware-name = "qcom/sm8250/cdsp.mbn";
};
+&i2c1 {
+ status = "okay";
+ clock-frequency = <1000000>;
+
+ /* NQ NFC chip @28 */
+};
+
+&i2c13 {
+ status = "okay";
+
+ /* st,stmfts @ 49 */
+};
+
+&i2c15 {
+ status = "okay";
+
+ /* smb1390 @ 10 */
+ /* rtc6226 @ 64 */
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
&qupv3_id_1 {
status = "okay";
};
+&qupv3_id_2 {
+ status = "okay";
+};
+
&slpi {
status = "okay";
firmware-name = "qcom/sm8250/slpi.mbn";
@@ -371,7 +399,7 @@ &tlmm {
gpio-reserved-ranges = <28 4>, <40 4>;
};
-&uart2 {
+&uart12 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 377172e..d057d85 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -5,11 +5,14 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-sm8250.h>
+#include <dt-bindings/clock/qcom,gpucc-sm8250.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom-aoss-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
@@ -72,7 +75,7 @@ xo_board: xo-board {
sleep_clk: sleep-clk {
compatible = "fixed-clock";
- clock-frequency = <32000>;
+ clock-frequency = <32768>;
#clock-cells = <0>;
};
};
@@ -87,6 +90,8 @@ CPU0: cpu@0 {
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&L2_0>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ #cooling-cells = <2>;
L2_0: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -102,6 +107,8 @@ CPU1: cpu@100 {
reg = <0x0 0x100>;
enable-method = "psci";
next-level-cache = <&L2_100>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ #cooling-cells = <2>;
L2_100: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -114,6 +121,8 @@ CPU2: cpu@200 {
reg = <0x0 0x200>;
enable-method = "psci";
next-level-cache = <&L2_200>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ #cooling-cells = <2>;
L2_200: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -126,6 +135,8 @@ CPU3: cpu@300 {
reg = <0x0 0x300>;
enable-method = "psci";
next-level-cache = <&L2_300>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ #cooling-cells = <2>;
L2_300: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -138,6 +149,8 @@ CPU4: cpu@400 {
reg = <0x0 0x400>;
enable-method = "psci";
next-level-cache = <&L2_400>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ #cooling-cells = <2>;
L2_400: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -150,6 +163,8 @@ CPU5: cpu@500 {
reg = <0x0 0x500>;
enable-method = "psci";
next-level-cache = <&L2_500>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ #cooling-cells = <2>;
L2_500: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -163,6 +178,8 @@ CPU6: cpu@600 {
reg = <0x0 0x600>;
enable-method = "psci";
next-level-cache = <&L2_600>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ #cooling-cells = <2>;
L2_600: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -175,6 +192,8 @@ CPU7: cpu@700 {
reg = <0x0 0x700>;
enable-method = "psci";
next-level-cache = <&L2_700>;
+ qcom,freq-domain = <&cpufreq_hw 2>;
+ #cooling-cells = <2>;
L2_700: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -393,8 +412,12 @@ gcc: clock-controller@100000 {
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
- clock-names = "bi_tcxo", "sleep_clk";
- clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+ clock-names = "bi_tcxo",
+ "bi_tcxo_ao",
+ "sleep_clk";
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>;
};
ipcc: mailbox@408000 {
@@ -406,6 +429,25 @@ ipcc: mailbox@408000 {
#mbox-cells = <2>;
};
+ qup_opp_table: qup-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-120000000 {
+ opp-hz = /bits/ 64 <120000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+ };
+
qupv3_id_2: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x008c0000 0x0 0x6000>;
@@ -440,6 +482,8 @@ spi14: spi@880000 {
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -466,6 +510,8 @@ spi15: spi@884000 {
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -492,6 +538,8 @@ spi16: spi@888000 {
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -518,6 +566,21 @@ spi17: spi@88c000 {
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
+ status = "disabled";
+ };
+
+ uart17: serial@88c000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x0088c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart17_default>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -544,6 +607,21 @@ spi18: spi@890000 {
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
+ status = "disabled";
+ };
+
+ uart18: serial@890000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00890000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart18_default>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -570,6 +648,8 @@ spi19: spi@894000 {
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
};
@@ -608,6 +688,8 @@ spi0: spi@980000 {
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -634,6 +716,8 @@ spi1: spi@984000 {
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -660,6 +744,21 @@ spi2: spi@988000 {
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
+ status = "disabled";
+ };
+
+ uart2: serial@988000 {
+ compatible = "qcom,geni-debug-uart";
+ reg = <0 0x00988000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart2_default>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -686,6 +785,8 @@ spi3: spi@98c000 {
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -712,6 +813,8 @@ spi4: spi@990000 {
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -738,6 +841,8 @@ spi5: spi@994000 {
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -764,6 +869,21 @@ spi6: spi@998000 {
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
+ status = "disabled";
+ };
+
+ uart6: serial@998000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00998000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart6_default>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -790,6 +910,8 @@ spi7: spi@99c000 {
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
};
@@ -828,6 +950,8 @@ spi8: spi@a80000 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -854,6 +978,8 @@ spi9: spi@a84000 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -880,6 +1006,8 @@ spi10: spi@a88000 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -906,6 +1034,8 @@ spi11: spi@a8c000 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -932,15 +1062,21 @@ spi12: spi@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
- uart2: serial@a90000 {
+ uart12: serial@a90000 {
compatible = "qcom,geni-debug-uart";
reg = <0x0 0x00a90000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart12_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -967,10 +1103,61 @@ spi13: spi@a94000 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SM8250_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
};
+ config_noc: interconnect@1500000 {
+ compatible = "qcom,sm8250-config-noc";
+ reg = <0 0x01500000 0 0xa580>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ system_noc: interconnect@1620000 {
+ compatible = "qcom,sm8250-system-noc";
+ reg = <0 0x01620000 0 0x1c200>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mc_virt: interconnect@163d000 {
+ compatible = "qcom,sm8250-mc-virt";
+ reg = <0 0x0163d000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre1_noc: interconnect@16e0000 {
+ compatible = "qcom,sm8250-aggre1-noc";
+ reg = <0 0x016e0000 0 0x1f180>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre2_noc: interconnect@1700000 {
+ compatible = "qcom,sm8250-aggre2-noc";
+ reg = <0 0x01700000 0 0x33000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ compute_noc: interconnect@1733000 {
+ compatible = "qcom,sm8250-compute-noc";
+ reg = <0 0x01733000 0 0xa180>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mmss_noc: interconnect@1740000 {
+ compatible = "qcom,sm8250-mmss-noc";
+ reg = <0 0x01740000 0 0x1f080>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
ufs_mem_hc: ufshc@1d84000 {
compatible = "qcom,sm8250-ufshc", "qcom,ufshc",
"jedec,ufs-2.0";
@@ -1041,6 +1228,13 @@ ufs_mem_phy_lanes: lanes@1d87400 {
};
};
+ ipa_virt: interconnect@1e00000 {
+ compatible = "qcom,sm8250-ipa-virt";
+ reg = <0 0x01e00000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -1127,15 +1321,15 @@ gmu: gmu@3d6a000 {
<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hfi", "gmu";
- clocks = <&gpucc 0>,
- <&gpucc 3>,
- <&gpucc 6>,
+ clocks = <&gpucc GPU_CC_AHB_CLK>,
+ <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_CXO_CLK>,
<&gcc GCC_DDRSS_GPU_AXI_CLK>,
<&gcc GCC_GPU_MEMNOC_GFX_CLK>;
clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
- power-domains = <&gpucc 0>,
- <&gpucc 1>;
+ power-domains = <&gpucc GPU_CX_GDSC>,
+ <&gpucc GPU_GX_GDSC>;
power-domain-names = "cx", "gx";
iommus = <&adreno_smmu 5 0x400>;
@@ -1181,12 +1375,12 @@ adreno_smmu: iommu@3da0000 {
<GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gpucc 0>,
+ clocks = <&gpucc GPU_CC_AHB_CLK>,
<&gcc GCC_GPU_MEMNOC_GFX_CLK>,
<&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
clock-names = "ahb", "bus", "iface";
- power-domains = <&gpucc 0>;
+ power-domains = <&gpucc GPU_CX_GDSC>;
};
slpi: remoteproc@5c00000 {
@@ -1266,6 +1460,27 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
};
};
+ dc_noc: interconnect@90c0000 {
+ compatible = "qcom,sm8250-dc-noc";
+ reg = <0 0x090c0000 0 0x4200>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ gem_noc: interconnect@9100000 {
+ compatible = "qcom,sm8250-gem-noc";
+ reg = <0 0x09100000 0 0xb4000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ npu_noc: interconnect@9990000 {
+ compatible = "qcom,sm8250-npu-noc";
+ reg = <0 0x09990000 0 0x1600>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sm8250-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
@@ -1276,6 +1491,28 @@ pdc: interrupt-controller@b220000 {
interrupt-controller;
};
+ tsens0: thermal-sensor@c263000 {
+ compatible = "qcom,sm8250-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c263000 0 0x1ff>, /* TM */
+ <0 0x0c222000 0 0x1ff>; /* SROT */
+ #qcom,sensors = <16>;
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@c265000 {
+ compatible = "qcom,sm8250-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c265000 0 0x1ff>, /* TM */
+ <0 0x0c223000 0 0x1ff>; /* SROT */
+ #qcom,sensors = <9>;
+ interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
aoss_qmp: qmp@c300000 {
compatible = "qcom,sm8250-aoss-qmp";
reg = <0 0x0c300000 0 0x100000>;
@@ -1880,6 +2117,43 @@ config {
bias-disable;
};
};
+
+ qup_uart2_default: qup-uart2-default {
+ mux {
+ pins = "gpio117", "gpio118";
+ function = "qup2";
+ };
+ };
+
+ qup_uart6_default: qup-uart6-default {
+ mux {
+ pins = "gpio16", "gpio17",
+ "gpio18", "gpio19";
+ function = "qup6";
+ };
+ };
+
+ qup_uart12_default: qup-uart12-default {
+ mux {
+ pins = "gpio34", "gpio35";
+ function = "qup12";
+ };
+ };
+
+ qup_uart17_default: qup-uart17-default {
+ mux {
+ pins = "gpio52", "gpio53",
+ "gpio54", "gpio55";
+ function = "qup17";
+ };
+ };
+
+ qup_uart18_default: qup-uart18-default {
+ mux {
+ pins = "gpio58", "gpio59";
+ function = "qup18";
+ };
+ };
};
adsp: remoteproc@17300000 {
@@ -2066,6 +2340,34 @@ rpmhpd_opp_turbo_l1: opp10 {
};
};
};
+
+ apps_bcm_voter: bcm_voter {
+ compatible = "qcom,bcm-voter";
+ };
+ };
+
+ epss_l3: interconnect@18591000 {
+ compatible = "qcom,sm8250-epss-l3";
+ reg = <0 0x18590000 0 0x1000>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+ clock-names = "xo", "alternate";
+
+ #interconnect-cells = <1>;
+ };
+
+ cpufreq_hw: cpufreq@18591000 {
+ compatible = "qcom,sm8250-cpufreq-epss", "qcom,cpufreq-epss";
+ reg = <0 0x18591000 0 0x1000>,
+ <0 0x18592000 0 0x1000>,
+ <0 0x18593000 0 0x1000>;
+ reg-names = "freq-domain0", "freq-domain1",
+ "freq-domain2";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+ clock-names = "xo", "alternate";
+
+ #freq-domain-cells = <1>;
};
};
@@ -2080,4 +2382,739 @@ timer {
<GIC_PPI 12
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
+
+ thermal-zones {
+ cpu0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ cpu0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu0_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu0_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ cpu1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu1_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu1_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ cpu2_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu2_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu2_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ cpu3_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu3_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu3_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu3_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu3_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu4-top-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cpu4_top_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_top_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_top_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu4_top_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu4_top_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu5-top-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cpu5_top_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_top_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_top_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu5_top_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu5_top_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu6-top-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ cpu6_top_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_top_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_top_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu6_top_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu6_top_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu7-top-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ cpu7_top_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_top_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_top_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu7_top_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu7_top_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu4-bottom-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ cpu4_bottom_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_bottom_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_bottom_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu4_bottom_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu4_bottom_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu5-bottom-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ cpu5_bottom_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_bottom_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_bottom_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu5_bottom_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu5_bottom_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu6-bottom-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 13>;
+
+ trips {
+ cpu6_bottom_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_bottom_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_bottom_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu6_bottom_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu6_bottom_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu7-bottom-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 14>;
+
+ trips {
+ cpu7_bottom_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_bottom_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_bottom_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu7_bottom_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu7_bottom_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ aoss0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ aoss0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cluster0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ cluster0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cluster0_crit: cluster0_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cluster1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cluster1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cluster1_crit: cluster1_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu-thermal-top {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 15>;
+
+ trips {
+ gpu1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ aoss1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ aoss1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ wlan-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ wlan_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ video-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ video_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ mem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ mem_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ q6-hvx-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ q6_hvx_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ camera-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ camera_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ compute-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ compute_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ npu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ npu_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ gpu-thermal-bottom {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 8>;
+
+ trips {
+ gpu2_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index d790229..dffefe0 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -21,6 +21,7 @@
dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h.dtb
dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex.dtb
+dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-idk-1110wr.dtb
dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-salvator-x.dtb
dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb
@@ -53,3 +54,5 @@
dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb
dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
+
+dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 8e80f50..c15f1c5 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -408,7 +408,7 @@ gpio7: gpio@e6055800 {
resets = <&cpg 905>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a774a1";
reg = <0 0xe6060000 0 0x50c>;
};
@@ -2371,6 +2371,44 @@ pciec1: pcie@ee800000 {
status = "disabled";
};
+ pciec0_ep: pcie-ep@fe000000 {
+ compatible = "renesas,r8a774a1-pcie-ep",
+ "renesas,rcar-gen3-pcie-ep";
+ reg = <0x0 0xfe000000 0 0x80000>,
+ <0x0 0xfe100000 0 0x100000>,
+ <0x0 0xfe200000 0 0x200000>,
+ <0x0 0x30000000 0 0x8000000>,
+ <0x0 0x38000000 0 0x8000000>;
+ reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 319>;
+ clock-names = "pcie";
+ resets = <&cpg 319>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ pciec1_ep: pcie-ep@ee800000 {
+ compatible = "renesas,r8a774a1-pcie-ep",
+ "renesas,rcar-gen3-pcie-ep";
+ reg = <0x0 0xee800000 0 0x80000>,
+ <0x0 0xee900000 0 0x100000>,
+ <0x0 0xeea00000 0 0x200000>,
+ <0x0 0xc0000000 0 0x8000000>,
+ <0x0 0xc8000000 0 0x8000000>;
+ reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 318>;
+ clock-names = "pcie";
+ resets = <&cpg 318>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
fdp1@fe940000 {
compatible = "renesas,fdp1";
reg = <0 0xfe940000 0 0x2400>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts
index a3edd55..60d7c8a 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts
@@ -14,3 +14,8 @@ / {
compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2n",
"renesas,r8a774b1";
};
+
+/* Set SW43 = ON and SW1001[7] = OFF for SATA port to be activated */
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index 49e5add..39a1a26f 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -282,7 +282,7 @@ gpio7: gpio@e6055800 {
resets = <&cpg 905>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a774b1";
reg = <0 0xe6060000 0 0x50c>;
};
@@ -2240,6 +2240,44 @@ pciec1: pcie@ee800000 {
status = "disabled";
};
+ pciec0_ep: pcie-ep@fe000000 {
+ compatible = "renesas,r8a774b1-pcie-ep",
+ "renesas,rcar-gen3-pcie-ep";
+ reg = <0x0 0xfe000000 0 0x80000>,
+ <0x0 0xfe100000 0 0x100000>,
+ <0x0 0xfe200000 0 0x200000>,
+ <0x0 0x30000000 0 0x8000000>,
+ <0x0 0x38000000 0 0x8000000>;
+ reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 319>;
+ clock-names = "pcie";
+ resets = <&cpg 319>;
+ power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ pciec1_ep: pcie-ep@ee800000 {
+ compatible = "renesas,r8a774b1-pcie-ep",
+ "renesas,rcar-gen3-pcie-ep";
+ reg = <0x0 0xee800000 0 0x80000>,
+ <0x0 0xee900000 0 0x100000>,
+ <0x0 0xeea00000 0 0x200000>,
+ <0x0 0xc0000000 0 0x8000000>,
+ <0x0 0xc8000000 0 0x8000000>;
+ reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 318>;
+ clock-names = "pcie";
+ resets = <&cpg 318>;
+ power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
fdp1@fe940000 {
compatible = "renesas,fdp1";
reg = <0 0xfe940000 0 0x2400>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 4217119..f27d9b2 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -256,7 +256,7 @@ gpio6: gpio@e6055400 {
resets = <&cpg 906>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a774c0";
reg = <0 0xe6060000 0 0x508>;
};
@@ -1214,9 +1214,8 @@ msiof1: spi@e6ea0000 {
reg = <0 0xe6ea0000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 210>;
- dmas = <&dmac1 0x43>, <&dmac1 0x42>,
- <&dmac2 0x43>, <&dmac2 0x42>;
- dma-names = "tx", "rx", "tx", "rx";
+ dmas = <&dmac0 0x43>, <&dmac0 0x42>;
+ dma-names = "tx", "rx";
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 210>;
#address-cells = <1>;
@@ -1698,6 +1697,25 @@ pciec0: pcie@fe000000 {
status = "disabled";
};
+ pciec0_ep: pcie-ep@fe000000 {
+ compatible = "renesas,r8a774c0-pcie-ep",
+ "renesas,rcar-gen3-pcie-ep";
+ reg = <0x0 0xfe000000 0 0x80000>,
+ <0x0 0xfe100000 0 0x100000>,
+ <0x0 0xfe200000 0 0x200000>,
+ <0x0 0x30000000 0 0x8000000>,
+ <0x0 0x38000000 0 0x8000000>;
+ reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 319>;
+ clock-names = "pcie";
+ resets = <&cpg 319>;
+ power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
vspb0: vsp@fe960000 {
compatible = "renesas,vsp2";
reg = <0 0xfe960000 0 0x8000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-idk-1110wr.dts
new file mode 100644
index 0000000..3b73391
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-idk-1110wr.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H sub board connected
+ * to an Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774e1-hihope-rzg2h-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
+#include "rzg2-advantech-idk-1110wr-panel.dtsi"
+
+&lvds0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts
index 265355e..8129959 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts
@@ -13,3 +13,8 @@ / {
compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2h",
"renesas,r8a774e1";
};
+
+/* Set SW43 = ON and SW1001[7] = OFF for SATA port to be activated */
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts
index cdbe527..9525d5e 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts
@@ -24,3 +24,18 @@ memory@500000000 {
reg = <0x5 0x00000000 0x0 0x80000000>;
};
};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 721>,
+ <&versaclock5 1>,
+ <&x302_clk>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.3",
+ "dclkin.0", "dclkin.1", "dclkin.3";
+};
+
+&sdhi3 {
+ mmc-hs400-1_8v;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index 0f86cfd..9cbf963 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -127,6 +127,7 @@ a57_0: cpu@0 {
power-domains = <&sysc R8A774E1_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
dynamic-power-coefficient = <854>;
clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
@@ -141,6 +142,7 @@ a57_1: cpu@1 {
power-domains = <&sysc R8A774E1_PD_CA57_CPU1>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
capacity-dmips-mhz = <1024>;
@@ -154,6 +156,7 @@ a57_2: cpu@2 {
power-domains = <&sysc R8A774E1_PD_CA57_CPU2>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
capacity-dmips-mhz = <1024>;
@@ -167,6 +170,7 @@ a57_3: cpu@3 {
power-domains = <&sysc R8A774E1_PD_CA57_CPU3>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
capacity-dmips-mhz = <1024>;
@@ -180,6 +184,7 @@ a53_0: cpu@100 {
power-domains = <&sysc R8A774E1_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_1>;
#cooling-cells = <2>;
dynamic-power-coefficient = <277>;
clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
@@ -194,6 +199,7 @@ a53_1: cpu@101 {
power-domains = <&sysc R8A774E1_PD_CA53_CPU1>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_1>;
clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
capacity-dmips-mhz = <535>;
@@ -206,6 +212,7 @@ a53_2: cpu@102 {
power-domains = <&sysc R8A774E1_PD_CA53_CPU2>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_1>;
clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
capacity-dmips-mhz = <535>;
@@ -218,6 +225,7 @@ a53_3: cpu@103 {
power-domains = <&sysc R8A774E1_PD_CA53_CPU3>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_1>;
clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
capacity-dmips-mhz = <535>;
@@ -236,6 +244,28 @@ L2_CA53: cache-controller-1 {
cache-unified;
cache-level = <2>;
};
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
+ entry-latency-us = <400>;
+ exit-latency-us = <500>;
+ min-residency-us = <4000>;
+ };
+
+ CPU_SLEEP_1: cpu-sleep-1 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
+ entry-latency-us = <700>;
+ exit-latency-us = <700>;
+ min-residency-us = <5000>;
+ };
+ };
};
extal_clk: extal {
@@ -427,7 +457,7 @@ gpio7: gpio@e6055800 {
resets = <&cpg 905>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a774e1";
reg = <0 0xe6060000 0 0x50c>;
};
@@ -838,18 +868,61 @@ hscif4: serial@e66b0000 {
};
hsusb: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a774e1",
+ "renesas,rcar-gen3-usbhs";
reg = <0 0xe6590000 0 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+ <&usb_dmac1 0>, <&usb_dmac1 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ renesas,buswait = <11>;
+ phys = <&usb2_phy0 3>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 704>, <&cpg 703>;
status = "disabled";
+ };
- /* placeholder */
+ usb_dmac0: dma-controller@e65a0000 {
+ compatible = "renesas,r8a774e1-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65a0000 0 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 330>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 330>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac1: dma-controller@e65b0000 {
+ compatible = "renesas,r8a774e1-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65b0000 0 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 331>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 331>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
};
usb3_phy0: usb-phy@e65ee000 {
+ compatible = "renesas,r8a774e1-usb3-phy",
+ "renesas,rcar-gen3-usb3-phy";
reg = <0 0xe65ee000 0 0x90>;
+ clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+ <&usb_extal_clk>;
+ clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 328>;
#phy-cells = <0>;
status = "disabled";
-
- /* placeholder */
};
dmac0: dma-controller@e6700000 {
@@ -1203,11 +1276,73 @@ channel1 {
};
pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
reg = <0 0xe6e30000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
+ };
- /* placeholder */
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@e6e35000 {
+ compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+ reg = <0 0xe6e35000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@e6e36000 {
+ compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+ reg = <0 0xe6e36000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
};
scif0: serial@e6e60000 {
@@ -1372,7 +1507,260 @@ msiof3: spi@e6c10000 {
status = "disabled";
};
+ vin0: video@e6ef0000 {
+ compatible = "renesas,vin-r8a774e1";
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 811>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 811>;
+ renesas,id = <0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin0csi20: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi20vin0>;
+ };
+ vin0csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin0>;
+ };
+ };
+ };
+ };
+
+ vin1: video@e6ef1000 {
+ compatible = "renesas,vin-r8a774e1";
+ reg = <0 0xe6ef1000 0 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 810>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 810>;
+ renesas,id = <1>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin1csi20: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi20vin1>;
+ };
+ vin1csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin1>;
+ };
+ };
+ };
+ };
+
+ vin2: video@e6ef2000 {
+ compatible = "renesas,vin-r8a774e1";
+ reg = <0 0xe6ef2000 0 0x1000>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 809>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 809>;
+ renesas,id = <2>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin2csi20: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi20vin2>;
+ };
+ vin2csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin2>;
+ };
+ };
+ };
+ };
+
+ vin3: video@e6ef3000 {
+ compatible = "renesas,vin-r8a774e1";
+ reg = <0 0xe6ef3000 0 0x1000>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 808>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 808>;
+ renesas,id = <3>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin3csi20: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi20vin3>;
+ };
+ vin3csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin3>;
+ };
+ };
+ };
+ };
+
+ vin4: video@e6ef4000 {
+ compatible = "renesas,vin-r8a774e1";
+ reg = <0 0xe6ef4000 0 0x1000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 807>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 807>;
+ renesas,id = <4>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin4csi20: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi20vin4>;
+ };
+ };
+ };
+ };
+
+ vin5: video@e6ef5000 {
+ compatible = "renesas,vin-r8a774e1";
+ reg = <0 0xe6ef5000 0 0x1000>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 806>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 806>;
+ renesas,id = <5>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin5csi20: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi20vin5>;
+ };
+ };
+ };
+ };
+
+ vin6: video@e6ef6000 {
+ compatible = "renesas,vin-r8a774e1";
+ reg = <0 0xe6ef6000 0 0x1000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 805>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 805>;
+ renesas,id = <6>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin6csi20: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi20vin6>;
+ };
+ };
+ };
+ };
+
+ vin7: video@e6ef7000 {
+ compatible = "renesas,vin-r8a774e1";
+ reg = <0 0xe6ef7000 0 0x1000>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 804>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 804>;
+ renesas,id = <7>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin7csi20: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi20vin7>;
+ };
+ };
+ };
+ };
+
rcar_sound: sound@ec500000 {
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ /*
+ * #clock-cells is required for audio_clkout0/1/2/3
+ *
+ * clkout : #clock-cells = <0>; <&rcar_sound>;
+ * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a774e1", "renesas,rcar_sound-gen3";
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
@@ -1380,71 +1768,569 @@ rcar_sound: sound@ec500000 {
<0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE R8A774E1_CLK_S0D4>;
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0",
+ "src.9", "src.8", "src.7", "src.6",
+ "src.5", "src.4", "src.3", "src.2",
+ "src.1", "src.0",
+ "mix.1", "mix.0",
+ "ctu.1", "ctu.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>,
+ <&cpg 1008>, <&cpg 1009>,
+ <&cpg 1010>, <&cpg 1011>,
+ <&cpg 1012>, <&cpg 1013>,
+ <&cpg 1014>, <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0";
status = "disabled";
- /* placeholder */
+ rcar_sound,dvc {
+ dvc0: dvc-0 {
+ dmas = <&audma1 0xbc>;
+ dma-names = "tx";
+ };
+ dvc1: dvc-1 {
+ dmas = <&audma1 0xbe>;
+ dma-names = "tx";
+ };
+ };
+
+ rcar_sound,mix {
+ mix0: mix-0 { };
+ mix1: mix-1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
+ rcar_sound,src {
+ src0: src-0 {
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x85>, <&audma1 0x9a>;
+ dma-names = "rx", "tx";
+ };
+ src1: src-1 {
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x87>, <&audma1 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ src2: src-2 {
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x89>, <&audma1 0x9e>;
+ dma-names = "rx", "tx";
+ };
+ src3: src-3 {
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+ dma-names = "rx", "tx";
+ };
+ src4: src-4 {
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+ dma-names = "rx", "tx";
+ };
+ src5: src-5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src-6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma1 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ src7: src-7 {
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x93>, <&audma1 0xb6>;
+ dma-names = "rx", "tx";
+ };
+ src8: src-8 {
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x95>, <&audma1 0xb8>;
+ dma-names = "rx", "tx";
+ };
+ src9: src-9 {
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x97>, <&audma1 0xba>;
+ dma-names = "rx", "tx";
+ };
+ };
+
+ rcar_sound,ssiu {
+ ssiu00: ssiu-0 {
+ dmas = <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx";
+ };
+ ssiu01: ssiu-1 {
+ dmas = <&audma0 0x35>, <&audma1 0x36>;
+ dma-names = "rx", "tx";
+ };
+ ssiu02: ssiu-2 {
+ dmas = <&audma0 0x37>, <&audma1 0x38>;
+ dma-names = "rx", "tx";
+ };
+ ssiu03: ssiu-3 {
+ dmas = <&audma0 0x47>, <&audma1 0x48>;
+ dma-names = "rx", "tx";
+ };
+ ssiu04: ssiu-4 {
+ dmas = <&audma0 0x3F>, <&audma1 0x40>;
+ dma-names = "rx", "tx";
+ };
+ ssiu05: ssiu-5 {
+ dmas = <&audma0 0x43>, <&audma1 0x44>;
+ dma-names = "rx", "tx";
+ };
+ ssiu06: ssiu-6 {
+ dmas = <&audma0 0x4F>, <&audma1 0x50>;
+ dma-names = "rx", "tx";
+ };
+ ssiu07: ssiu-7 {
+ dmas = <&audma0 0x53>, <&audma1 0x54>;
+ dma-names = "rx", "tx";
+ };
+ ssiu10: ssiu-8 {
+ dmas = <&audma0 0x49>, <&audma1 0x4a>;
+ dma-names = "rx", "tx";
+ };
+ ssiu11: ssiu-9 {
+ dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+ dma-names = "rx", "tx";
+ };
+ ssiu12: ssiu-10 {
+ dmas = <&audma0 0x57>, <&audma1 0x58>;
+ dma-names = "rx", "tx";
+ };
+ ssiu13: ssiu-11 {
+ dmas = <&audma0 0x59>, <&audma1 0x5A>;
+ dma-names = "rx", "tx";
+ };
+ ssiu14: ssiu-12 {
+ dmas = <&audma0 0x5F>, <&audma1 0x60>;
+ dma-names = "rx", "tx";
+ };
+ ssiu15: ssiu-13 {
+ dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+ dma-names = "rx", "tx";
+ };
+ ssiu16: ssiu-14 {
+ dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+ dma-names = "rx", "tx";
+ };
+ ssiu17: ssiu-15 {
+ dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+ dma-names = "rx", "tx";
+ };
+ ssiu20: ssiu-16 {
+ dmas = <&audma0 0x63>, <&audma1 0x64>;
+ dma-names = "rx", "tx";
+ };
+ ssiu21: ssiu-17 {
+ dmas = <&audma0 0x67>, <&audma1 0x68>;
+ dma-names = "rx", "tx";
+ };
+ ssiu22: ssiu-18 {
+ dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+ dma-names = "rx", "tx";
+ };
+ ssiu23: ssiu-19 {
+ dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+ dma-names = "rx", "tx";
+ };
+ ssiu24: ssiu-20 {
+ dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+ dma-names = "rx", "tx";
+ };
+ ssiu25: ssiu-21 {
+ dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+ dma-names = "rx", "tx";
+ };
+ ssiu26: ssiu-22 {
+ dmas = <&audma0 0xED>, <&audma1 0xEE>;
+ dma-names = "rx", "tx";
+ };
+ ssiu27: ssiu-23 {
+ dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+ dma-names = "rx", "tx";
+ };
+ ssiu30: ssiu-24 {
+ dmas = <&audma0 0x6f>, <&audma1 0x70>;
+ dma-names = "rx", "tx";
+ };
+ ssiu31: ssiu-25 {
+ dmas = <&audma0 0x21>, <&audma1 0x22>;
+ dma-names = "rx", "tx";
+ };
+ ssiu32: ssiu-26 {
+ dmas = <&audma0 0x23>, <&audma1 0x24>;
+ dma-names = "rx", "tx";
+ };
+ ssiu33: ssiu-27 {
+ dmas = <&audma0 0x25>, <&audma1 0x26>;
+ dma-names = "rx", "tx";
+ };
+ ssiu34: ssiu-28 {
+ dmas = <&audma0 0x27>, <&audma1 0x28>;
+ dma-names = "rx", "tx";
+ };
+ ssiu35: ssiu-29 {
+ dmas = <&audma0 0x29>, <&audma1 0x2A>;
+ dma-names = "rx", "tx";
+ };
+ ssiu36: ssiu-30 {
+ dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+ dma-names = "rx", "tx";
+ };
+ ssiu37: ssiu-31 {
+ dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+ dma-names = "rx", "tx";
+ };
+ ssiu40: ssiu-32 {
+ dmas = <&audma0 0x71>, <&audma1 0x72>;
+ dma-names = "rx", "tx";
+ };
+ ssiu41: ssiu-33 {
+ dmas = <&audma0 0x17>, <&audma1 0x18>;
+ dma-names = "rx", "tx";
+ };
+ ssiu42: ssiu-34 {
+ dmas = <&audma0 0x19>, <&audma1 0x1A>;
+ dma-names = "rx", "tx";
+ };
+ ssiu43: ssiu-35 {
+ dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+ dma-names = "rx", "tx";
+ };
+ ssiu44: ssiu-36 {
+ dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+ dma-names = "rx", "tx";
+ };
+ ssiu45: ssiu-37 {
+ dmas = <&audma0 0x1F>, <&audma1 0x20>;
+ dma-names = "rx", "tx";
+ };
+ ssiu46: ssiu-38 {
+ dmas = <&audma0 0x31>, <&audma1 0x32>;
+ dma-names = "rx", "tx";
+ };
+ ssiu47: ssiu-39 {
+ dmas = <&audma0 0x33>, <&audma1 0x34>;
+ dma-names = "rx", "tx";
+ };
+ ssiu50: ssiu-40 {
+ dmas = <&audma0 0x73>, <&audma1 0x74>;
+ dma-names = "rx", "tx";
+ };
+ ssiu60: ssiu-41 {
+ dmas = <&audma0 0x75>, <&audma1 0x76>;
+ dma-names = "rx", "tx";
+ };
+ ssiu70: ssiu-42 {
+ dmas = <&audma0 0x79>, <&audma1 0x7a>;
+ dma-names = "rx", "tx";
+ };
+ ssiu80: ssiu-43 {
+ dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+ dma-names = "rx", "tx";
+ };
+ ssiu90: ssiu-44 {
+ dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+ dma-names = "rx", "tx";
+ };
+ ssiu91: ssiu-45 {
+ dmas = <&audma0 0x7F>, <&audma1 0x80>;
+ dma-names = "rx", "tx";
+ };
+ ssiu92: ssiu-46 {
+ dmas = <&audma0 0x81>, <&audma1 0x82>;
+ dma-names = "rx", "tx";
+ };
+ ssiu93: ssiu-47 {
+ dmas = <&audma0 0x83>, <&audma1 0x84>;
+ dma-names = "rx", "tx";
+ };
+ ssiu94: ssiu-48 {
+ dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+ dma-names = "rx", "tx";
+ };
+ ssiu95: ssiu-49 {
+ dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+ dma-names = "rx", "tx";
+ };
+ ssiu96: ssiu-50 {
+ dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+ dma-names = "rx", "tx";
+ };
+ ssiu97: ssiu-51 {
+ dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+ dma-names = "rx", "tx";
+ };
+ };
rcar_sound,ssi {
+ ssi0: ssi-0 {
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x01>, <&audma1 0x02>;
+ dma-names = "rx", "tx";
+ };
+ ssi1: ssi-1 {
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x03>, <&audma1 0x04>;
+ dma-names = "rx", "tx";
+ };
ssi2: ssi-2 {
- /* placeholder */
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x05>, <&audma1 0x06>;
+ dma-names = "rx", "tx";
+ };
+ ssi3: ssi-3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma1 0x08>;
+ dma-names = "rx", "tx";
+ };
+ ssi4: ssi-4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma1 0x0a>;
+ dma-names = "rx", "tx";
+ };
+ ssi5: ssi-5 {
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+ dma-names = "rx", "tx";
+ };
+ ssi6: ssi-6 {
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+ dma-names = "rx", "tx";
+ };
+ ssi7: ssi-7 {
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0f>, <&audma1 0x10>;
+ dma-names = "rx", "tx";
+ };
+ ssi8: ssi-8 {
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x11>, <&audma1 0x12>;
+ dma-names = "rx", "tx";
+ };
+ ssi9: ssi-9 {
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x13>, <&audma1 0x14>;
+ dma-names = "rx", "tx";
};
};
};
- xhci0: usb@ee000000 {
- reg = <0 0xee000000 0 0xc00>;
- status = "disabled";
+ audma0: dma-controller@ec700000 {
+ compatible = "renesas,dmac-r8a774e1",
+ "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 502>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ iommus = <&ipmmu_mp0 0>, <&ipmmu_mp0 1>,
+ <&ipmmu_mp0 2>, <&ipmmu_mp0 3>,
+ <&ipmmu_mp0 4>, <&ipmmu_mp0 5>,
+ <&ipmmu_mp0 6>, <&ipmmu_mp0 7>,
+ <&ipmmu_mp0 8>, <&ipmmu_mp0 9>,
+ <&ipmmu_mp0 10>, <&ipmmu_mp0 11>,
+ <&ipmmu_mp0 12>, <&ipmmu_mp0 13>,
+ <&ipmmu_mp0 14>, <&ipmmu_mp0 15>;
+ };
- /* placeholder */
+ audma1: dma-controller@ec720000 {
+ compatible = "renesas,dmac-r8a774e1",
+ "renesas,rcar-dmac";
+ reg = <0 0xec720000 0 0x10000>;
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 501>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 501>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ iommus = <&ipmmu_mp0 16>, <&ipmmu_mp0 17>,
+ <&ipmmu_mp0 18>, <&ipmmu_mp0 19>,
+ <&ipmmu_mp0 20>, <&ipmmu_mp0 21>,
+ <&ipmmu_mp0 22>, <&ipmmu_mp0 23>,
+ <&ipmmu_mp0 24>, <&ipmmu_mp0 25>,
+ <&ipmmu_mp0 26>, <&ipmmu_mp0 27>,
+ <&ipmmu_mp0 28>, <&ipmmu_mp0 29>,
+ <&ipmmu_mp0 30>, <&ipmmu_mp0 31>;
+ };
+
+ xhci0: usb@ee000000 {
+ compatible = "renesas,xhci-r8a774e1",
+ "renesas,rcar-gen3-xhci";
+ reg = <0 0xee000000 0 0xc00>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 328>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 328>;
+ status = "disabled";
};
usb3_peri0: usb@ee020000 {
+ compatible = "renesas,r8a774e1-usb3-peri",
+ "renesas,rcar-gen3-usb3-peri";
reg = <0 0xee020000 0 0x400>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 328>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 328>;
status = "disabled";
-
- /* placeholder */
};
ohci0: usb@ee080000 {
+ compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+ phys = <&usb2_phy0 1>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
-
- /* placeholder */
};
ohci1: usb@ee0a0000 {
+ compatible = "generic-ohci";
reg = <0 0xee0a0000 0 0x100>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 702>;
+ phys = <&usb2_phy1 1>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 702>;
status = "disabled";
-
- /* placeholder */
};
ehci0: usb@ee080100 {
+ compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+ phys = <&usb2_phy0 2>;
+ phy-names = "usb";
+ companion = <&ohci0>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
-
- /* placeholder */
};
ehci1: usb@ee0a0100 {
+ compatible = "generic-ehci";
reg = <0 0xee0a0100 0 0x100>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 702>;
+ phys = <&usb2_phy1 2>;
+ phy-names = "usb";
+ companion = <&ohci1>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 702>;
status = "disabled";
-
- /* placeholder */
};
usb2_phy0: usb-phy@ee080200 {
+ compatible = "renesas,usb2-phy-r8a774e1",
+ "renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
+ #phy-cells = <1>;
status = "disabled";
-
- /* placeholder */
};
usb2_phy1: usb-phy@ee0a0200 {
+ compatible = "renesas,usb2-phy-r8a774e1",
+ "renesas,rcar-gen3-usb2-phy";
reg = <0 0xee0a0200 0 0x700>;
+ clocks = <&cpg CPG_MOD 702>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 702>;
+ #phy-cells = <1>;
status = "disabled";
-
- /* placeholder */
};
sdhi0: mmc@ee100000 {
@@ -1499,6 +2385,18 @@ sdhi3: mmc@ee160000 {
status = "disabled";
};
+ sata: sata@ee300000 {
+ compatible = "renesas,sata-r8a774e1",
+ "renesas,rcar-gen3-sata";
+ reg = <0 0xee300000 0 0x200000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 815>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 815>;
+ iommus = <&ipmmu_hc 2>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -1517,53 +2415,435 @@ gic: interrupt-controller@f1010000 {
};
pciec0: pcie@fe000000 {
+ compatible = "renesas,pcie-r8a774e1",
+ "renesas,pcie-rcar-gen3";
reg = <0 0xfe000000 0 0x80000>;
#address-cells = <3>;
#size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+ <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ /* Map all possible DDR as inbound ranges */
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
+ status = "disabled";
+ };
+
+ pciec1: pcie@ee800000 {
+ compatible = "renesas,pcie-r8a774e1",
+ "renesas,pcie-rcar-gen3";
+ reg = <0 0xee800000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+ <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+ <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+ /* Map all possible DDR as inbound ranges */
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 318>;
+ status = "disabled";
+ };
+
+ pciec0_ep: pcie-ep@fe000000 {
+ compatible = "renesas,r8a774e1-pcie-ep",
+ "renesas,rcar-gen3-pcie-ep";
+ reg = <0x0 0xfe000000 0 0x80000>,
+ <0x0 0xfe100000 0 0x100000>,
+ <0x0 0xfe200000 0 0x200000>,
+ <0x0 0x30000000 0 0x8000000>,
+ <0x0 0x38000000 0 0x8000000>;
+ reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 319>;
+ clock-names = "pcie";
+ resets = <&cpg 319>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ pciec1_ep: pcie-ep@ee800000 {
+ compatible = "renesas,r8a774e1-pcie-ep",
+ "renesas,rcar-gen3-pcie-ep";
+ reg = <0x0 0xee800000 0 0x80000>,
+ <0x0 0xee900000 0 0x100000>,
+ <0x0 0xeea00000 0 0x200000>,
+ <0x0 0xc0000000 0 0x8000000>,
+ <0x0 0xc8000000 0 0x8000000>;
+ reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 318>;
+ clock-names = "pcie";
+ resets = <&cpg 318>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ vspbc: vsp@fe920000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe920000 0 0x8000>;
+ interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 624>;
+ power-domains = <&sysc R8A774E1_PD_A3VP>;
+ resets = <&cpg 624>;
+
+ renesas,fcp = <&fcpvb1>;
+ };
+
+ vspbd: vsp@fe960000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe960000 0 0x8000>;
+ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 626>;
+ power-domains = <&sysc R8A774E1_PD_A3VP>;
+ resets = <&cpg 626>;
+
+ renesas,fcp = <&fcpvb0>;
+ };
+
+ vspd0: vsp@fea20000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea20000 0 0x5000>;
+ interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 623>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 623>;
+
+ renesas,fcp = <&fcpvd0>;
+ };
+
+ vspd1: vsp@fea28000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea28000 0 0x5000>;
+ interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 622>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 622>;
+
+ renesas,fcp = <&fcpvd1>;
+ };
+
+ vspi0: vsp@fe9a0000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe9a0000 0 0x8000>;
+ interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 631>;
+ power-domains = <&sysc R8A774E1_PD_A3VP>;
+ resets = <&cpg 631>;
+
+ renesas,fcp = <&fcpvi0>;
+ };
+
+ vspi1: vsp@fe9b0000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe9b0000 0 0x8000>;
+ interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 630>;
+ power-domains = <&sysc R8A774E1_PD_A3VP>;
+ resets = <&cpg 630>;
+
+ renesas,fcp = <&fcpvi1>;
+ };
+
+ fdp1@fe940000 {
+ compatible = "renesas,fdp1";
+ reg = <0 0xfe940000 0 0x2400>;
+ interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 119>;
+ power-domains = <&sysc R8A774E1_PD_A3VP>;
+ resets = <&cpg 119>;
+ renesas,fcp = <&fcpf0>;
+ };
+
+ fdp1@fe944000 {
+ compatible = "renesas,fdp1";
+ reg = <0 0xfe944000 0 0x2400>;
+ interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 118>;
+ power-domains = <&sysc R8A774E1_PD_A3VP>;
+ resets = <&cpg 118>;
+ renesas,fcp = <&fcpf1>;
+ };
+
+ fcpf0: fcp@fe950000 {
+ compatible = "renesas,fcpf";
+ reg = <0 0xfe950000 0 0x200>;
+ clocks = <&cpg CPG_MOD 615>;
+ power-domains = <&sysc R8A774E1_PD_A3VP>;
+ resets = <&cpg 615>;
+ };
+
+ fcpf1: fcp@fe951000 {
+ compatible = "renesas,fcpf";
+ reg = <0 0xfe951000 0 0x200>;
+ clocks = <&cpg CPG_MOD 614>;
+ power-domains = <&sysc R8A774E1_PD_A3VP>;
+ resets = <&cpg 614>;
+ };
+
+ fcpvb0: fcp@fe96f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe96f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 607>;
+ power-domains = <&sysc R8A774E1_PD_A3VP>;
+ resets = <&cpg 607>;
+ };
+
+ fcpvb1: fcp@fe92f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe92f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 606>;
+ power-domains = <&sysc R8A774E1_PD_A3VP>;
+ resets = <&cpg 606>;
+ };
+
+ fcpvi0: fcp@fe9af000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe9af000 0 0x200>;
+ clocks = <&cpg CPG_MOD 611>;
+ power-domains = <&sysc R8A774E1_PD_A3VP>;
+ resets = <&cpg 611>;
+ };
+
+ fcpvi1: fcp@fe9bf000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe9bf000 0 0x200>;
+ clocks = <&cpg CPG_MOD 610>;
+ power-domains = <&sysc R8A774E1_PD_A3VP>;
+ resets = <&cpg 610>;
+ };
+
+ fcpvd0: fcp@fea27000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea27000 0 0x200>;
+ clocks = <&cpg CPG_MOD 603>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 603>;
+ };
+
+ fcpvd1: fcp@fea2f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea2f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 602>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 602>;
+ };
+
+ csi20: csi2@fea80000 {
+ compatible = "renesas,r8a774e1-csi2";
+ reg = <0 0xfea80000 0 0x10000>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 714>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 714>;
status = "disabled";
- /* placeholder */
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ csi20vin0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vin0csi20>;
+ };
+ csi20vin1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vin1csi20>;
+ };
+ csi20vin2: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&vin2csi20>;
+ };
+ csi20vin3: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&vin3csi20>;
+ };
+ csi20vin4: endpoint@4 {
+ reg = <4>;
+ remote-endpoint = <&vin4csi20>;
+ };
+ csi20vin5: endpoint@5 {
+ reg = <5>;
+ remote-endpoint = <&vin5csi20>;
+ };
+ csi20vin6: endpoint@6 {
+ reg = <6>;
+ remote-endpoint = <&vin6csi20>;
+ };
+ csi20vin7: endpoint@7 {
+ reg = <7>;
+ remote-endpoint = <&vin7csi20>;
+ };
+ };
+ };
+ };
+
+ csi40: csi2@feaa0000 {
+ compatible = "renesas,r8a774e1-csi2";
+ reg = <0 0xfeaa0000 0 0x10000>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 716>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ csi40vin0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vin0csi40>;
+ };
+ csi40vin1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vin1csi40>;
+ };
+ csi40vin2: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&vin2csi40>;
+ };
+ csi40vin3: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&vin3csi40>;
+ };
+ };
+ };
};
hdmi0: hdmi@fead0000 {
+ compatible = "renesas,r8a774e1-hdmi",
+ "renesas,rcar-gen3-hdmi";
reg = <0 0xfead0000 0 0x10000>;
+ interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 729>,
+ <&cpg CPG_CORE R8A774E1_CLK_HDMI>;
+ clock-names = "iahb", "isfr";
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 729>;
status = "disabled";
- /* placeholder */
-
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
+ dw_hdmi0_in: endpoint {
+ remote-endpoint = <&du_out_hdmi0>;
+ };
};
port@1 {
reg = <1>;
};
port@2 {
+ /* HDMI sound */
reg = <2>;
};
};
};
du: display@feb00000 {
+ compatible = "renesas,du-r8a774e1";
reg = <0 0xfeb00000 0 0x80000>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 721>;
+ clock-names = "du.0", "du.1", "du.3";
+ resets = <&cpg 724>, <&cpg 722>;
+ reset-names = "du.0", "du.3";
status = "disabled";
- /* placeholder */
+ renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
+ du_out_rgb: endpoint {
+ };
};
port@1 {
reg = <1>;
+ du_out_hdmi0: endpoint {
+ remote-endpoint = <&dw_hdmi0_in>;
+ };
};
port@2 {
reg = <2>;
+ du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a774e1-lvds";
+ reg = <0 0xfeb90000 0 0x14>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 727>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index 9beb8e7..18ce0fa 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -490,7 +490,7 @@ gpio7: gpio@e6055800 {
resets = <&cpg 905>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a7795";
reg = <0 0xe6060000 0 0x50c>;
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index 4dfb7f0..f379c8d 100644
--- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -459,7 +459,7 @@ gpio7: gpio@e6055800 {
resets = <&cpg 905>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a7796";
reg = <0 0xe6060000 0 0x50c>;
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts
index 2ffc7e3..1e76033 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts
@@ -29,3 +29,60 @@ memory@600000000 {
reg = <0x6 0x00000000 0x1 0x00000000>;
};
};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&versaclock6 1>,
+ <&x21_clk>,
+ <&versaclock6 2>;
+ clock-names = "du.0", "du.1", "du.2",
+ "dclkin.0", "dclkin.1", "dclkin.2";
+};
+
+&hdmi0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ dw_hdmi0_snd_in: endpoint {
+ remote-endpoint = <&rsnd_endpoint1>;
+ };
+ };
+ };
+};
+
+&hdmi0_con {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
+};
+
+&rcar_sound {
+ ports {
+ /* rsnd_port0 is on salvator-common */
+ rsnd_port1: port@1 {
+ reg = <1>;
+ rsnd_endpoint1: endpoint {
+ remote-endpoint = <&dw_hdmi0_snd_in>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_endpoint1>;
+ frame-master = <&rsnd_endpoint1>;
+
+ playback = <&ssi2>;
+ };
+ };
+ };
+};
+
+&sound_card {
+ dais = <&rsnd_port0 /* ak4613 */
+ &rsnd_port1>; /* HDMI0 */
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index 542c44c..1ba3031 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -448,7 +448,7 @@ gpio7: gpio@e6055800 {
resets = <&cpg 905>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a77961";
reg = <0 0xe6060000 0 0x50c>;
};
@@ -1228,27 +1228,494 @@ vin7: video@e6ef7000 {
};
rcar_sound: sound@ec500000 {
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ /*
+ * #clock-cells is required for audio_clkout0/1/2/3
+ *
+ * clkout : #clock-cells = <0>; <&rcar_sound>;
+ * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a77961", "renesas,rcar_sound-gen3";
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
<0 0xec541000 0 0x280>, /* SSI */
<0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
- /* placeholder */
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE R8A77961_CLK_S0D4>;
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0",
+ "src.9", "src.8", "src.7", "src.6",
+ "src.5", "src.4", "src.3", "src.2",
+ "src.1", "src.0",
+ "mix.1", "mix.0",
+ "ctu.1", "ctu.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>,
+ <&cpg 1008>, <&cpg 1009>,
+ <&cpg 1010>, <&cpg 1011>,
+ <&cpg 1012>, <&cpg 1013>,
+ <&cpg 1014>, <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0";
+ status = "disabled";
+
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
rcar_sound,dvc {
- dvc0: dvc-0 { };
- dvc1: dvc-1 { };
+ dvc0: dvc-0 {
+ dmas = <&audma1 0xbc>;
+ dma-names = "tx";
+ };
+ dvc1: dvc-1 {
+ dmas = <&audma1 0xbe>;
+ dma-names = "tx";
+ };
+ };
+
+ rcar_sound,mix {
+ mix0: mix-0 { };
+ mix1: mix-1 { };
};
rcar_sound,src {
- src0: src-0 { };
- src1: src-1 { };
+ src0: src-0 {
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x85>, <&audma1 0x9a>;
+ dma-names = "rx", "tx";
+ };
+ src1: src-1 {
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x87>, <&audma1 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ src2: src-2 {
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x89>, <&audma1 0x9e>;
+ dma-names = "rx", "tx";
+ };
+ src3: src-3 {
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+ dma-names = "rx", "tx";
+ };
+ src4: src-4 {
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+ dma-names = "rx", "tx";
+ };
+ src5: src-5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src-6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma1 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ src7: src-7 {
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x93>, <&audma1 0xb6>;
+ dma-names = "rx", "tx";
+ };
+ src8: src-8 {
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x95>, <&audma1 0xb8>;
+ dma-names = "rx", "tx";
+ };
+ src9: src-9 {
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x97>, <&audma1 0xba>;
+ dma-names = "rx", "tx";
+ };
};
rcar_sound,ssi {
- ssi0: ssi-0 { };
- ssi1: ssi-1 { };
- ssi2: ssi-2 { };
+ ssi0: ssi-0 {
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x01>, <&audma1 0x02>;
+ dma-names = "rx", "tx";
+ };
+ ssi1: ssi-1 {
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x03>, <&audma1 0x04>;
+ dma-names = "rx", "tx";
+ };
+ ssi2: ssi-2 {
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x05>, <&audma1 0x06>;
+ dma-names = "rx", "tx";
+ };
+ ssi3: ssi-3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma1 0x08>;
+ dma-names = "rx", "tx";
+ };
+ ssi4: ssi-4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma1 0x0a>;
+ dma-names = "rx", "tx";
+ };
+ ssi5: ssi-5 {
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+ dma-names = "rx", "tx";
+ };
+ ssi6: ssi-6 {
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+ dma-names = "rx", "tx";
+ };
+ ssi7: ssi-7 {
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0f>, <&audma1 0x10>;
+ dma-names = "rx", "tx";
+ };
+ ssi8: ssi-8 {
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x11>, <&audma1 0x12>;
+ dma-names = "rx", "tx";
+ };
+ ssi9: ssi-9 {
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x13>, <&audma1 0x14>;
+ dma-names = "rx", "tx";
+ };
};
+
+ rcar_sound,ssiu {
+ ssiu00: ssiu-0 {
+ dmas = <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx";
+ };
+ ssiu01: ssiu-1 {
+ dmas = <&audma0 0x35>, <&audma1 0x36>;
+ dma-names = "rx", "tx";
+ };
+ ssiu02: ssiu-2 {
+ dmas = <&audma0 0x37>, <&audma1 0x38>;
+ dma-names = "rx", "tx";
+ };
+ ssiu03: ssiu-3 {
+ dmas = <&audma0 0x47>, <&audma1 0x48>;
+ dma-names = "rx", "tx";
+ };
+ ssiu04: ssiu-4 {
+ dmas = <&audma0 0x3F>, <&audma1 0x40>;
+ dma-names = "rx", "tx";
+ };
+ ssiu05: ssiu-5 {
+ dmas = <&audma0 0x43>, <&audma1 0x44>;
+ dma-names = "rx", "tx";
+ };
+ ssiu06: ssiu-6 {
+ dmas = <&audma0 0x4F>, <&audma1 0x50>;
+ dma-names = "rx", "tx";
+ };
+ ssiu07: ssiu-7 {
+ dmas = <&audma0 0x53>, <&audma1 0x54>;
+ dma-names = "rx", "tx";
+ };
+ ssiu10: ssiu-8 {
+ dmas = <&audma0 0x49>, <&audma1 0x4a>;
+ dma-names = "rx", "tx";
+ };
+ ssiu11: ssiu-9 {
+ dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+ dma-names = "rx", "tx";
+ };
+ ssiu12: ssiu-10 {
+ dmas = <&audma0 0x57>, <&audma1 0x58>;
+ dma-names = "rx", "tx";
+ };
+ ssiu13: ssiu-11 {
+ dmas = <&audma0 0x59>, <&audma1 0x5A>;
+ dma-names = "rx", "tx";
+ };
+ ssiu14: ssiu-12 {
+ dmas = <&audma0 0x5F>, <&audma1 0x60>;
+ dma-names = "rx", "tx";
+ };
+ ssiu15: ssiu-13 {
+ dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+ dma-names = "rx", "tx";
+ };
+ ssiu16: ssiu-14 {
+ dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+ dma-names = "rx", "tx";
+ };
+ ssiu17: ssiu-15 {
+ dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+ dma-names = "rx", "tx";
+ };
+ ssiu20: ssiu-16 {
+ dmas = <&audma0 0x63>, <&audma1 0x64>;
+ dma-names = "rx", "tx";
+ };
+ ssiu21: ssiu-17 {
+ dmas = <&audma0 0x67>, <&audma1 0x68>;
+ dma-names = "rx", "tx";
+ };
+ ssiu22: ssiu-18 {
+ dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+ dma-names = "rx", "tx";
+ };
+ ssiu23: ssiu-19 {
+ dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+ dma-names = "rx", "tx";
+ };
+ ssiu24: ssiu-20 {
+ dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+ dma-names = "rx", "tx";
+ };
+ ssiu25: ssiu-21 {
+ dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+ dma-names = "rx", "tx";
+ };
+ ssiu26: ssiu-22 {
+ dmas = <&audma0 0xED>, <&audma1 0xEE>;
+ dma-names = "rx", "tx";
+ };
+ ssiu27: ssiu-23 {
+ dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+ dma-names = "rx", "tx";
+ };
+ ssiu30: ssiu-24 {
+ dmas = <&audma0 0x6f>, <&audma1 0x70>;
+ dma-names = "rx", "tx";
+ };
+ ssiu31: ssiu-25 {
+ dmas = <&audma0 0x21>, <&audma1 0x22>;
+ dma-names = "rx", "tx";
+ };
+ ssiu32: ssiu-26 {
+ dmas = <&audma0 0x23>, <&audma1 0x24>;
+ dma-names = "rx", "tx";
+ };
+ ssiu33: ssiu-27 {
+ dmas = <&audma0 0x25>, <&audma1 0x26>;
+ dma-names = "rx", "tx";
+ };
+ ssiu34: ssiu-28 {
+ dmas = <&audma0 0x27>, <&audma1 0x28>;
+ dma-names = "rx", "tx";
+ };
+ ssiu35: ssiu-29 {
+ dmas = <&audma0 0x29>, <&audma1 0x2A>;
+ dma-names = "rx", "tx";
+ };
+ ssiu36: ssiu-30 {
+ dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+ dma-names = "rx", "tx";
+ };
+ ssiu37: ssiu-31 {
+ dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+ dma-names = "rx", "tx";
+ };
+ ssiu40: ssiu-32 {
+ dmas = <&audma0 0x71>, <&audma1 0x72>;
+ dma-names = "rx", "tx";
+ };
+ ssiu41: ssiu-33 {
+ dmas = <&audma0 0x17>, <&audma1 0x18>;
+ dma-names = "rx", "tx";
+ };
+ ssiu42: ssiu-34 {
+ dmas = <&audma0 0x19>, <&audma1 0x1A>;
+ dma-names = "rx", "tx";
+ };
+ ssiu43: ssiu-35 {
+ dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+ dma-names = "rx", "tx";
+ };
+ ssiu44: ssiu-36 {
+ dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+ dma-names = "rx", "tx";
+ };
+ ssiu45: ssiu-37 {
+ dmas = <&audma0 0x1F>, <&audma1 0x20>;
+ dma-names = "rx", "tx";
+ };
+ ssiu46: ssiu-38 {
+ dmas = <&audma0 0x31>, <&audma1 0x32>;
+ dma-names = "rx", "tx";
+ };
+ ssiu47: ssiu-39 {
+ dmas = <&audma0 0x33>, <&audma1 0x34>;
+ dma-names = "rx", "tx";
+ };
+ ssiu50: ssiu-40 {
+ dmas = <&audma0 0x73>, <&audma1 0x74>;
+ dma-names = "rx", "tx";
+ };
+ ssiu60: ssiu-41 {
+ dmas = <&audma0 0x75>, <&audma1 0x76>;
+ dma-names = "rx", "tx";
+ };
+ ssiu70: ssiu-42 {
+ dmas = <&audma0 0x79>, <&audma1 0x7a>;
+ dma-names = "rx", "tx";
+ };
+ ssiu80: ssiu-43 {
+ dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+ dma-names = "rx", "tx";
+ };
+ ssiu90: ssiu-44 {
+ dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+ dma-names = "rx", "tx";
+ };
+ ssiu91: ssiu-45 {
+ dmas = <&audma0 0x7F>, <&audma1 0x80>;
+ dma-names = "rx", "tx";
+ };
+ ssiu92: ssiu-46 {
+ dmas = <&audma0 0x81>, <&audma1 0x82>;
+ dma-names = "rx", "tx";
+ };
+ ssiu93: ssiu-47 {
+ dmas = <&audma0 0x83>, <&audma1 0x84>;
+ dma-names = "rx", "tx";
+ };
+ ssiu94: ssiu-48 {
+ dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+ dma-names = "rx", "tx";
+ };
+ ssiu95: ssiu-49 {
+ dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+ dma-names = "rx", "tx";
+ };
+ ssiu96: ssiu-50 {
+ dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+ dma-names = "rx", "tx";
+ };
+ ssiu97: ssiu-51 {
+ dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+ dma-names = "rx", "tx";
+ };
+ };
+ };
+
+ audma0: dma-controller@ec700000 {
+ compatible = "renesas,dmac-r8a77961",
+ "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 502>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+ <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+ <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+ <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+ <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+ <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+ <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+ <&ipmmu_mp 14>, <&ipmmu_mp 15>;
+ };
+
+ audma1: dma-controller@ec720000 {
+ compatible = "renesas,dmac-r8a77961",
+ "renesas,rcar-dmac";
+ reg = <0 0xec720000 0 0x10000>;
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 501>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 501>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>,
+ <&ipmmu_mp 18>, <&ipmmu_mp 19>,
+ <&ipmmu_mp 20>, <&ipmmu_mp 21>,
+ <&ipmmu_mp 22>, <&ipmmu_mp 23>,
+ <&ipmmu_mp 24>, <&ipmmu_mp 25>,
+ <&ipmmu_mp 26>, <&ipmmu_mp 27>,
+ <&ipmmu_mp 28>, <&ipmmu_mp 29>,
+ <&ipmmu_mp 30>, <&ipmmu_mp 31>;
};
xhci0: usb@ee000000 {
@@ -1465,6 +1932,113 @@ pciec1: pcie@ee800000 {
status = "disabled";
};
+ fcpf0: fcp@fe950000 {
+ compatible = "renesas,fcpf";
+ reg = <0 0xfe950000 0 0x200>;
+ clocks = <&cpg CPG_MOD 615>;
+ power-domains = <&sysc R8A77961_PD_A3VC>;
+ resets = <&cpg 615>;
+ };
+
+ fcpvb0: fcp@fe96f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe96f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 607>;
+ power-domains = <&sysc R8A77961_PD_A3VC>;
+ resets = <&cpg 607>;
+ };
+
+ fcpvi0: fcp@fe9af000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe9af000 0 0x200>;
+ clocks = <&cpg CPG_MOD 611>;
+ power-domains = <&sysc R8A77961_PD_A3VC>;
+ resets = <&cpg 611>;
+ iommus = <&ipmmu_vc0 19>;
+ };
+
+ fcpvd0: fcp@fea27000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea27000 0 0x200>;
+ clocks = <&cpg CPG_MOD 603>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 603>;
+ iommus = <&ipmmu_vi0 8>;
+ };
+
+ fcpvd1: fcp@fea2f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea2f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 602>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 602>;
+ iommus = <&ipmmu_vi0 9>;
+ };
+
+ fcpvd2: fcp@fea37000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea37000 0 0x200>;
+ clocks = <&cpg CPG_MOD 601>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 601>;
+ iommus = <&ipmmu_vi0 10>;
+ };
+
+ vspb: vsp@fe960000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe960000 0 0x8000>;
+ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 626>;
+ power-domains = <&sysc R8A77961_PD_A3VC>;
+ resets = <&cpg 626>;
+
+ renesas,fcp = <&fcpvb0>;
+ };
+
+ vspd0: vsp@fea20000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea20000 0 0x5000>;
+ interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 623>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 623>;
+
+ renesas,fcp = <&fcpvd0>;
+ };
+
+ vspd1: vsp@fea28000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea28000 0 0x5000>;
+ interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 622>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 622>;
+
+ renesas,fcp = <&fcpvd1>;
+ };
+
+ vspd2: vsp@fea30000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea30000 0 0x5000>;
+ interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 621>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 621>;
+
+ renesas,fcp = <&fcpvd2>;
+ };
+
+ vspi0: vsp@fe9a0000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe9a0000 0 0x8000>;
+ interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 631>;
+ power-domains = <&sysc R8A77961_PD_A3VC>;
+ resets = <&cpg 631>;
+
+ renesas,fcp = <&fcpvi0>;
+ };
+
csi20: csi2@fea80000 {
reg = <0 0xfea80000 0 0x10000>;
/* placeholder */
@@ -1499,14 +2073,23 @@ port@1 {
};
hdmi0: hdmi@fead0000 {
+ compatible = "renesas,r8a77961-hdmi", "renesas,rcar-gen3-hdmi";
reg = <0 0xfead0000 0 0x10000>;
- /* placeholder */
+ interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE R8A77961_CLK_HDMI>;
+ clock-names = "iahb", "isfr";
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 729>;
+ status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
+ dw_hdmi0_in: endpoint {
+ remote-endpoint = <&du_out_hdmi0>;
+ };
};
port@1 {
reg = <1>;
@@ -1519,8 +2102,19 @@ port@2 {
};
du: display@feb00000 {
+ compatible = "renesas,du-r8a77961";
reg = <0 0xfeb00000 0 0x70000>;
- /* placeholder */
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>;
+ clock-names = "du.0", "du.1", "du.2";
+ resets = <&cpg 724>, <&cpg 722>;
+ reset-names = "du.0", "du.2";
+
+ renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
+ status = "disabled";
ports {
#address-cells = <1>;
@@ -1534,6 +2128,7 @@ du_out_rgb: endpoint {
port@1 {
reg = <1>;
du_out_hdmi0: endpoint {
+ remote-endpoint = <&dw_hdmi0_in>;
};
};
port@2 {
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index fe4dc12..c355460 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -329,7 +329,7 @@ gpio7: gpio@e6055800 {
resets = <&cpg 905>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a77965";
reg = <0 0xe6060000 0 0x50c>;
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index 2b9124a..baf8cc8 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -204,7 +204,7 @@ gpio5: gpio@e6055000 {
resets = <&cpg 907>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a77970";
reg = <0 0xe6060000 0 0x504>;
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 59f5bbd..d6cae90 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -234,7 +234,7 @@ gpio5: gpio@e6055000 {
resets = <&cpg 907>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a77980";
reg = <0 0xe6060000 0 0x50c>;
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index 7402cfa..e0ccca2 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -520,10 +520,8 @@ &pciec0 {
&pfc {
avb_pins: avb {
- mux {
- groups = "avb_link", "avb_mii";
- function = "avb";
- };
+ groups = "avb_link", "avb_mii";
+ function = "avb";
};
canfd0_pins: canfd0 {
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 1991bdc..33d7e65 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -282,7 +282,7 @@ gpio6: gpio@e6055400 {
resets = <&cpg 906>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a77990";
reg = <0 0xe6060000 0 0x508>;
};
@@ -1192,9 +1192,8 @@ msiof1: spi@e6ea0000 {
reg = <0 0xe6ea0000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 210>;
- dmas = <&dmac1 0x43>, <&dmac1 0x42>,
- <&dmac2 0x43>, <&dmac2 0x42>;
- dma-names = "tx", "rx", "tx", "rx";
+ dmas = <&dmac0 0x43>, <&dmac0 0x42>;
+ dma-names = "tx", "rx";
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 210>;
#address-cells = <1>;
@@ -1288,6 +1287,126 @@ vin5csi40: endpoint@2 {
};
};
+ drif00: rif@e6f40000 {
+ compatible = "renesas,r8a77990-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f40000 0 0x84>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 515>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 515>;
+ renesas,bonding = <&drif01>;
+ status = "disabled";
+ };
+
+ drif01: rif@e6f50000 {
+ compatible = "renesas,r8a77990-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f50000 0 0x84>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 514>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 514>;
+ renesas,bonding = <&drif00>;
+ status = "disabled";
+ };
+
+ drif10: rif@e6f60000 {
+ compatible = "renesas,r8a77990-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f60000 0 0x84>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 513>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 513>;
+ renesas,bonding = <&drif11>;
+ status = "disabled";
+ };
+
+ drif11: rif@e6f70000 {
+ compatible = "renesas,r8a77990-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f70000 0 0x84>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 512>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 512>;
+ renesas,bonding = <&drif10>;
+ status = "disabled";
+ };
+
+ drif20: rif@e6f80000 {
+ compatible = "renesas,r8a77990-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f80000 0 0x84>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 511>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x28>;
+ dma-names = "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 511>;
+ renesas,bonding = <&drif21>;
+ status = "disabled";
+ };
+
+ drif21: rif@e6f90000 {
+ compatible = "renesas,r8a77990-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f90000 0 0x84>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 510>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x2a>;
+ dma-names = "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 510>;
+ renesas,bonding = <&drif20>;
+ status = "disabled";
+ };
+
+ drif30: rif@e6fa0000 {
+ compatible = "renesas,r8a77990-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6fa0000 0 0x84>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 509>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x2c>;
+ dma-names = "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 509>;
+ renesas,bonding = <&drif31>;
+ status = "disabled";
+ };
+
+ drif31: rif@e6fb0000 {
+ compatible = "renesas,r8a77990-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6fb0000 0 0x84>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 508>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x2e>;
+ dma-names = "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 508>;
+ renesas,bonding = <&drif30>;
+ status = "disabled";
+ };
+
rcar_sound: sound@ec500000 {
/*
* #sound-dai-cells is required
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index 79c73a9..8f47188 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -393,10 +393,8 @@ &ohci0 {
&pfc {
avb0_pins: avb {
- mux {
- groups = "avb0_link", "avb0_mdio", "avb0_mii";
- function = "avb0";
- };
+ groups = "avb0_link", "avb0_mdio", "avb0_mii";
+ function = "avb0";
};
can0_pins: can0 {
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index 2c2272f..cd7ca97 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -188,7 +188,7 @@ gpio6: gpio@e6055400 {
resets = <&cpg 906>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a77995";
reg = <0 0xe6060000 0 0x508>;
};
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
new file mode 100644
index 0000000..4ba269a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Falcon CPU board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a779a0.dtsi"
+
+/ {
+ model = "Renesas Falcon CPU board";
+ compatible = "renesas,falcon-cpu", "renesas,r8a779a0";
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x78000000>;
+ };
+
+ memory@500000000 {
+ device_type = "memory";
+ reg = <0x5 0x00000000 0x0 0x80000000>;
+ };
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x80000000>;
+ };
+
+ memory@700000000 {
+ device_type = "memory";
+ reg = <0x7 0x00000000 0x0 0x80000000>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
+&scif0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
new file mode 100644
index 0000000..8eda70e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Falcon CPU and BreakOut boards
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779a0-falcon-cpu.dtsi"
+
+/ {
+ model = "Renesas Falcon CPU and Breakout boards based on r8a779a0";
+ compatible = "renesas,falcon-breakout", "renesas,falcon-cpu", "renesas,r8a779a0";
+
+ aliases {
+ serial0 = &scif0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
new file mode 100644
index 0000000..6cf77ce
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car V3U (R8A779A0) SoC
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a779a0-sysc.h>
+
+/ {
+ compatible = "renesas,r8a779a0";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ a76_0: cpu@0 {
+ compatible = "arm,cortex-a76";
+ reg = <0>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A779A0_PD_A1E0D0C0>;
+ next-level-cache = <&L3_CA76_0>;
+ };
+
+ L3_CA76_0: cache-controller-0 {
+ compatible = "cache";
+ power-domains = <&sysc R8A779A0_PD_A2E0D0>;
+ cache-unified;
+ cache-level = <3>;
+ };
+ };
+
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ extalr_clk: extalr {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ pmu_a76 {
+ compatible = "arm,cortex-a76-pmu";
+ interrupts-extended = <&gic GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* External SCIF clock - to be overridden by boards that provide it */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a779a0-cpg-mssr";
+ reg = <0 0xe6150000 0 0x4000>;
+ clocks = <&extal_clk>, <&extalr_clk>;
+ clock-names = "extal", "extalr";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ #reset-cells = <1>;
+ };
+
+ rst: reset-controller@e6160000 {
+ compatible = "renesas,r8a779a0-rst";
+ reg = <0 0xe6160000 0 0x4000>;
+ };
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a779a0-sysc";
+ reg = <0 0xe6180000 0 0x4000>;
+ #power-domain-cells = <1>;
+ };
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a779a0",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e60000 0 64>;
+ interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 702>,
+ <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 702>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@f1000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0xf1000000 0 0x20000>,
+ <0x0 0xf1060000 0 0x110000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ };
+
+ prr: chipid@fff00044 {
+ compatible = "renesas,prr";
+ reg = <0 0xfff00044 0 4>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index ff88af8..a2e085d 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -469,6 +469,7 @@ &sdhi2 {
mmc-hs200-1_8v;
mmc-hs400-1_8v;
non-removable;
+ full-pwr-cycle-in-suspend;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index b87b1f7..26661c7 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -2,9 +2,11 @@
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
@@ -33,7 +35,9 @@
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
index e8b754d..2560b98 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -574,7 +574,7 @@ i2s_2ch_1: i2s@ff360000 {
};
spdif_tx: spdif-tx@ff3a0000 {
- compatible = "rockchip,rk3308-spdif", "rockchip,rk3328-spdif";
+ compatible = "rockchip,rk3308-spdif", "rockchip,rk3066-spdif";
reg = <0x0 0xff3a0000 0x0 0x1000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_SPDIF_TX>, <&cru HCLK_SPDIFTX>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
new file mode 100644
index 0000000..30c73ef
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3328.dtsi"
+
+/ {
+ model = "A95X Z2";
+ compatible = "zkmagic,a95x-z2", "rockchip,rk3318";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ recovery {
+ label = "recovery";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <17000>;
+ };
+ };
+
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&ir_int>;
+ pinctrl-names = "default";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&cyx_led_pin>;
+ pinctrl-names = "default";
+
+ cyx_led: led-0 {
+ default-state = "on";
+ gpios = <&gpio2 RK_PC7 GPIO_ACTIVE_LOW>;
+ label = "CYX_LED";
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-0 = <&wifi_enable_h>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+ };
+
+ spdif-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "SPDIF";
+
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ /* Power tree */
+ vccio_1v8: vccio-1v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vccio_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vccio_3v3: vccio-3v3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vccio_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcc_otg_vbus: otg-vbus-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&otg_vbus_drv>;
+ pinctrl-names = "default";
+ regulator-name = "vcc_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&sdmmc0m1_pin>;
+ pinctrl-names = "default";
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vccio_3v3>;
+ };
+
+ vdd_arm: vdd-arm {
+ compatible = "pwm-regulator";
+ pwms = <&pwm0 0 5000 1>;
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-settling-time-up-us = <250>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm1 0 5000 1>;
+ regulator-name = "vdd_log";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-settling-time-up-us = <250>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&analog_sound {
+ status = "okay";
+};
+
+&codec {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu0_opp_table {
+ opp-1200000000 {
+ status = "disabled";
+ };
+
+ opp-1296000000 {
+ status = "disabled";
+ };
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ non-removable;
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&gmac2phy {
+ assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
+ assigned-clock-rate = <50000000>;
+ assigned-clocks = <&cru SCLK_MAC2PHY>;
+ clock_in_out = "output";
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_log>;
+};
+
+&hdmi {
+ ddc-i2c-scl-high-time-ns = <9625>;
+ ddc-i2c-scl-low-time-ns = <10000>;
+ status = "okay";
+};
+
+&hdmiphy {
+ status = "okay";
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&i2s1 {
+ status = "okay";
+};
+
+&io_domains {
+ pmuio-supply = <&vccio_3v3>;
+ vccio1-supply = <&vccio_3v3>;
+ vccio2-supply = <&vccio_1v8>;
+ vccio3-supply = <&vccio_3v3>;
+ vccio4-supply = <&vccio_1v8>;
+ vccio5-supply = <&vccio_3v3>;
+ vccio6-supply = <&vccio_3v3>;
+ status = "okay";
+};
+
+&pinctrl {
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ cyx_led_pin: cyx-led-pin {
+ rockchip,pins = <2 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pwm0 {
+ pwm0_pin_pull_up: pwm0-pin-pull-up {
+ rockchip,pins = <2 RK_PA4 1 &pcfg_pull_up>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin_pull_up: pwm1-pin-pull-up {
+ rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc1 {
+ clk_32k_out: clk-32k-out {
+ rockchip,pins = <1 RK_PD4 1 &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ pinctrl-0 = <&pwm0_pin_pull_up>;
+ pinctrl-names = "active";
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-0 = <&pwm1_pin_pull_up>;
+ pinctrl-names = "active";
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vccio_1v8>;
+ status = "okay";
+};
+
+&sdio {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ max-frequency = <125000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &clk_32k_out>;
+ pinctrl-names = "default";
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+ pinctrl-names = "default";
+ vmmc-supply = <&vcc_sd>;
+ status = "okay";
+};
+
+&spdif {
+ pinctrl-0 = <&spdifm0_tx>;
+ status = "okay";
+};
+
+&soc_crit {
+ temperature = <115000>; /* millicelsius */
+};
+
+&target {
+ temperature = <105000>; /* millicelsius */
+};
+
+&threshold {
+ temperature = <90000>; /* millicelsius */
+};
+
+&tsadc {
+ rockchip,hw-tshut-temp = <120000>;
+ status = "okay";
+};
+
+&u2phy {
+ status = "okay";
+};
+
+&u2phy_host {
+ status = "okay";
+};
+
+&u2phy_otg {
+ phy-supply = <&vcc_otg_vbus>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb20_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&vop {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
index 1969dab..a487679 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -70,6 +70,18 @@ &cpu0 {
cpu-supply = <&vdd_arm>;
};
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
new file mode 100644
index 0000000..be7a31d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 David Bauer <mail@david-bauer.net>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "rk3328.dtsi"
+
+/ {
+ model = "FriendlyElec NanoPi R2S";
+ compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ gmac_clk: gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_clk";
+ #clock-cells = <0>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&reset_button_pin>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <50>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
+ pinctrl-names = "default";
+
+ lan_led: led-0 {
+ gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+ label = "nanopi-r2s:green:lan";
+ };
+
+ sys_led: led-1 {
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ label = "nanopi-r2s:red:sys";
+ };
+
+ wan_led: led-2 {
+ gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
+ label = "nanopi-r2s:green:wan";
+ };
+ };
+
+ vcc_io_sdio: sdmmcio-regulator {
+ compatible = "regulator-gpio";
+ enable-active-high;
+ gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&sdio_vcc_pin>;
+ pinctrl-names = "default";
+ regulator-name = "vcc_io_sdio";
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-settling-time-us = <5000>;
+ regulator-type = "voltage";
+ startup-delay-us = <2000>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ vin-supply = <&vcc_io_33>;
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&sdmmc0m1_pin>;
+ pinctrl-names = "default";
+ regulator-name = "vcc_sd";
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_io_33>;
+ };
+
+ vdd_5v: vdd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&gmac2io {
+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+ assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
+ clock_in_out = "input";
+ phy-handle = <&rtl8211e>;
+ phy-mode = "rgmii";
+ phy-supply = <&vcc_io_33>;
+ pinctrl-0 = <&rgmiim1_pins>;
+ pinctrl-names = "default";
+ rx_delay = <0x18>;
+ snps,aal;
+ tx_delay = <0x24>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtl8211e: ethernet-phy@1 {
+ reg = <1>;
+ pinctrl-0 = <ð_phy_reset_pin>;
+ pinctrl-names = "default";
+ reset-assert-us = <10000>;
+ reset-deassert-us = <50000>;
+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ rk805: pmic@18 {
+ compatible = "rockchip,rk805";
+ reg = <0x18>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk805-clkout2";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-0 = <&pmic_int_l>;
+ pinctrl-names = "default";
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vdd_5v>;
+ vcc2-supply = <&vdd_5v>;
+ vcc3-supply = <&vdd_5v>;
+ vcc4-supply = <&vdd_5v>;
+ vcc5-supply = <&vcc_io_33>;
+ vcc6-supply = <&vdd_5v>;
+
+ regulators {
+ vdd_log: DCDC_REG1 {
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io_33: DCDC_REG4 {
+ regulator-name = "vcc_io_33";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_18: LDO_REG1 {
+ regulator-name = "vcc_18";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc18_emmc: LDO_REG2 {
+ regulator-name = "vcc18_emmc";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-name = "vdd_10";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+ };
+ };
+};
+
+&io_domains {
+ pmuio-supply = <&vcc_io_33>;
+ vccio1-supply = <&vcc_io_33>;
+ vccio2-supply = <&vcc18_emmc>;
+ vccio3-supply = <&vcc_io_sdio>;
+ vccio4-supply = <&vcc_18>;
+ vccio5-supply = <&vcc_io_33>;
+ vccio6-supply = <&vcc_io_33>;
+ status = "okay";
+};
+
+&pinctrl {
+ button {
+ reset_button_pin: reset-button-pin {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ ethernet-phy {
+ eth_phy_reset_pin: eth-phy-reset-pin {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ leds {
+ lan_led_pin: lan-led-pin {
+ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ sys_led_pin: sys-led-pin {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wan_led_pin: wan-led-pin {
+ rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sd {
+ sdio_vcc_pin: sdio-vcc-pin {
+ rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ disable-wp;
+ pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
+ pinctrl-names = "default";
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vcc_io_sdio>;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <0>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&u2phy {
+ status = "okay";
+};
+
+&u2phy_host {
+ status = "okay";
+};
+
+&u2phy_otg {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb20_otg {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
index 1c52f47..87fabc6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
@@ -134,7 +134,7 @@ &gmac {
pinctrl-0 = <&rmii_pins>;
tx_delay = <0x30>;
rx_delay = <0x10>;
- status = "ok";
+ status = "okay";
};
&i2c0 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index b058ce9..ecce16e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -183,7 +183,7 @@ &gmac {
snps,reset-delays-us = <0 10000 1000000>;
tx_delay = <0x30>;
rx_delay = <0x10>;
- status = "ok";
+ status = "okay";
};
&i2c0 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index 236ab0f..2582fa4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -167,7 +167,7 @@ &gmac {
pinctrl-0 = <&rmii_pins>;
tx_delay = <0x30>;
rx_delay = <0x10>;
- status = "ok";
+ status = "okay";
};
&i2c0 {
@@ -198,7 +198,7 @@ hym8563: hym8563@51 {
};
&io_domains {
- status = "ok";
+ status = "okay";
audio-supply = <&vcc_io>;
gpio30-supply = <&vcc_io>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index e36837c..635afdd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -138,6 +138,14 @@ power {
};
};
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+ linux,rc-map-name = "rc-khadas";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_rx>;
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -585,6 +593,12 @@ pwrbtn: pwrbtn {
};
};
+ ir {
+ ir_rx: ir-rx {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
leds {
sys_led_pin: sys-led-pin {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -690,6 +704,16 @@ &sdhci {
status = "okay";
};
+&spi1 {
+ status = "okay";
+
+ spiflash: flash@0 {
+ compatible = "winbond,w25q128fw", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ };
+};
+
&tcphy0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
index 2acb3d5..754627d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
@@ -11,6 +11,16 @@ / {
model = "Firefly ROC-RK3399-PC Mezzanine Board";
compatible = "firefly,roc-rk3399-pc-mezzanine", "rockchip,rk3399";
+ /* MP8009 PoE PD */
+ poe_12v: poe-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "poe_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
vcc3v3_ngff: vcc3v3-ngff {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_ngff";
@@ -22,7 +32,7 @@ vcc3v3_ngff: vcc3v3-ngff {
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_12v>;
+ vin-supply = <&sys_12v>;
};
vcc3v3_pcie: vcc3v3-pcie {
@@ -34,10 +44,14 @@ vcc3v3_pcie: vcc3v3-pcie {
pinctrl-0 = <&vcc3v3_pcie_en>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_12v>;
+ vin-supply = <&sys_12v>;
};
};
+&sys_12v {
+ vin-supply = <&poe_12v>;
+};
+
&pcie_phy {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index b85ec31..e7a459f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -110,6 +110,14 @@ vcc_vbus_typec0: vcc-vbus-typec0 {
regulator-max-microvolt = <5000000>;
};
+ sys_12v: sys-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "sys_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&dc_12v>;
+ };
+
/* switched by pmic_sleep */
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
compatible = "regulator-fixed";
@@ -141,7 +149,7 @@ vcc3v3_sys: vcc3v3-sys {
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_12v>;
+ vin-supply = <&sys_12v>;
};
vcca_0v9: vcca-0v9 {
@@ -186,7 +194,7 @@ vcc_sys: vcc-sys {
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_12v>;
+ vin-supply = <&sys_12v>;
};
vdd_log: vdd-log {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
similarity index 94%
rename from arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
rename to arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index 60f98a3..678a336 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -11,9 +11,6 @@
#include "rk3399-opp.dtsi"
/ {
- model = "Radxa ROCK Pi 4";
- compatible = "radxa,rockpi4", "rockchip,rk3399";
-
chosen {
stdout-path = "serial2:1500000n8";
};
@@ -587,17 +584,6 @@ &sdio0 {
pinctrl-names = "default";
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
sd-uhs-sdr104;
- status = "okay";
-
- brcmf: wifi@1 {
- compatible = "brcm,bcm4329-fmac";
- reg = <1>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
- interrupt-names = "host-wake";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_host_wake_l>;
- };
};
&sdmmc {
@@ -666,18 +652,6 @@ u2phy1_host: host-port {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- clocks = <&rk808 1>;
- clock-names = "ext_clock";
- device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
- };
};
&uart2 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a.dts
new file mode 100644
index 0000000..89f2af5
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+
+/ {
+ model = "Radxa ROCK Pi 4A";
+ compatible = "radxa,rockpi4a", "radxa,rockpi4", "rockchip,rk3399";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts
new file mode 100644
index 0000000..f0055ce
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+
+/ {
+ model = "Radxa ROCK Pi 4B";
+ compatible = "radxa,rockpi4b", "radxa,rockpi4", "rockchip,rk3399";
+};
+
+&sdio0 {
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_l>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts
new file mode 100644
index 0000000..4c7ebb1c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+
+/ {
+ model = "Radxa ROCK Pi 4C";
+ compatible = "radxa,rockpi4c", "radxa,rockpi4", "rockchip,rk3399";
+};
+
+&sdio0 {
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_l>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+ };
+};
+
+&vcc5v0_host {
+ gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc5v0_host_en {
+ rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+};
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 05c0beb..65506f2 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -3,9 +3,11 @@
# Make file to build device tree binaries for boards based on
# Texas Instruments Inc processors
#
-# Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
+# Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
#
-dtb-$(CONFIG_ARCH_K3_AM6_SOC) += k3-am654-base-board.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
-dtb-$(CONFIG_ARCH_K3_J721E_SOC) += k3-j721e-common-proc-board.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb
+
+dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 24ef18f..5335252 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -112,7 +112,29 @@ main_uart2: serial@2820000 {
power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
};
- main_pmx0: pinmux@11c000 {
+ crypto: crypto@4e00000 {
+ compatible = "ti,am654-sa2ul";
+ reg = <0x0 0x4e00000 0x0 0x1200>;
+ power-domains = <&k3_pds 136 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>;
+ status = "okay";
+
+ dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
+ <&main_udmap 0x4001>;
+ dma-names = "tx", "rx1", "rx2";
+ dma-coherent;
+
+ rng: rng@4e10000 {
+ compatible = "inside-secure,safexcel-eip76";
+ reg = <0x0 0x4e10000 0x0 0x7d>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 136 1>;
+ };
+ };
+
+ main_pmx0: pinctrl@11c000 {
compatible = "pinctrl-single";
reg = <0x0 0x11c000 0x0 0x2e4>;
#pinctrl-cells = <1>;
@@ -120,7 +142,7 @@ main_pmx0: pinmux@11c000 {
pinctrl-single,function-mask = <0xffffffff>;
};
- main_pmx1: pinmux@11c2e8 {
+ main_pmx1: pinctrl@11c2e8 {
compatible = "pinctrl-single";
reg = <0x0 0x11c2e8 0x0 0x24>;
#pinctrl-cells = <1>;
@@ -283,7 +305,7 @@ sdhci1: sdhci@4fa0000 {
no-1-8-v;
};
- scm_conf: scm_conf@100000 {
+ scm_conf: scm-conf@100000 {
compatible = "syscon", "simple-mfd";
reg = <0 0x00100000 0 0x1c000>;
#address-cells = <1>;
@@ -305,12 +327,12 @@ pcie_devid: pcie-devid@210 {
reg = <0x00000210 0x4>;
};
- serdes0_clk: serdes_clk@4080 {
+ serdes0_clk: clock@4080 {
compatible = "syscon";
reg = <0x00004080 0x4>;
};
- serdes1_clk: serdes_clk@4090 {
+ serdes1_clk: clock@4090 {
compatible = "syscon";
reg = <0x00004090 0x4>;
};
@@ -322,12 +344,12 @@ serdes_mux: mux-controller {
<0x4090 0x3>; /* SERDES1 lane select */
};
- dss_oldi_io_ctrl: dss_oldi_io_ctrl@41E0 {
+ dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 {
compatible = "syscon";
- reg = <0x0000041E0 0x14>;
+ reg = <0x0000041e0 0x14>;
};
- ehrpwm_tbclk: syscon@4140 {
+ ehrpwm_tbclk: clock@4140 {
compatible = "ti,am654-ehrpwm-tbclk", "syscon";
reg = <0x4140 0x18>;
#clock-cells = <1>;
@@ -423,7 +445,7 @@ intr_main_gpio: interrupt-controller0 {
ti,interrupt-ranges = <0 392 32>;
};
- main_navss {
+ main-navss {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
@@ -639,7 +661,7 @@ main_cpts_mux: refclk-mux {
};
};
- main_gpio0: main_gpio0@600000 {
+ main_gpio0: gpio@600000 {
compatible = "ti,am654-gpio", "ti,keystone-gpio";
reg = <0x0 0x600000 0x0 0x100>;
gpio-controller;
@@ -654,7 +676,7 @@ main_gpio0: main_gpio0@600000 {
clock-names = "gpio";
};
- main_gpio1: main_gpio1@601000 {
+ main_gpio1: gpio@601000 {
compatible = "ti,am654-gpio", "ti,keystone-gpio";
reg = <0x0 0x601000 0x0 0x100>;
gpio-controller;
@@ -682,7 +704,7 @@ pcie0_rc: pcie@5500000 {
ti,syscon-pcie-mode = <&pcie0_mode>;
bus-range = <0x0 0xff>;
num-viewport = <16>;
- max-link-speed = <3>;
+ max-link-speed = <2>;
dma-coherent;
interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
msi-map = <0x0 &gic_its 0x0 0x10000>;
@@ -696,7 +718,7 @@ pcie0_ep: pcie-ep@5500000 {
ti,syscon-pcie-mode = <&pcie0_mode>;
num-ib-windows = <16>;
num-ob-windows = <16>;
- max-link-speed = <3>;
+ max-link-speed = <2>;
dma-coherent;
interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
};
@@ -714,7 +736,7 @@ pcie1_rc: pcie@5600000 {
ti,syscon-pcie-mode = <&pcie1_mode>;
bus-range = <0x0 0xff>;
num-viewport = <16>;
- max-link-speed = <3>;
+ max-link-speed = <2>;
dma-coherent;
interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
msi-map = <0x0 &gic_its 0x10000 0x10000>;
@@ -728,7 +750,7 @@ pcie1_ep: pcie-ep@5600000 {
ti,syscon-pcie-mode = <&pcie1_mode>;
num-ib-windows = <16>;
num-ob-windows = <16>;
- max-link-speed = <3>;
+ max-link-speed = <2>;
dma-coherent;
interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 51ca4b4..29aaf8d 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -6,7 +6,7 @@
*/
&cbass_mcu {
- mcu_conf: scm_conf@40f00000 {
+ mcu_conf: scm-conf@40f00000 {
compatible = "syscon", "simple-mfd";
reg = <0x0 0x40f00000 0x0 0x20000>;
#address-cells = <1>;
@@ -116,7 +116,7 @@ adc {
};
};
- mcu_navss {
+ mcu-navss {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index a1ffe88..ed42f13 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -39,7 +39,7 @@ chipid@43000014 {
reg = <0x43000014 0x4>;
};
- wkup_pmx0: pinmux@4301c000 {
+ wkup_pmx0: pinctrl@4301c000 {
compatible = "pinctrl-single";
reg = <0x4301c000 0x118>;
#pinctrl-cells = <1>;
@@ -80,7 +80,7 @@ intr_wkup_gpio: interrupt-controller2 {
ti,interrupt-ranges = <0 712 16>;
};
- wkup_gpio0: wkup_gpio0@42110000 {
+ wkup_gpio0: gpio@42110000 {
compatible = "ti,am654-gpio", "ti,keystone-gpio";
reg = <0x42110000 0x100>;
gpio-controller;
@@ -95,7 +95,7 @@ wkup_gpio0: wkup_gpio0@42110000 {
clock-names = "gpio";
};
- wkup_vtm0: thermal@42050000 {
+ wkup_vtm0: temperature-sensor@42050000 {
compatible = "ti,am654-vtm";
reg = <0x42050000 0x25c>;
power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
index 27c0406..d84c0bc 100644
--- a/arch/arm64/boot/dts/ti/k3-am65.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -61,7 +61,7 @@ pmu: pmu {
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
- cbass_main: interconnect@100000 {
+ cbass_main: bus@100000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
@@ -88,7 +88,7 @@ cbass_main: interconnect@100000 {
<0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
<0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
- cbass_mcu: interconnect@28380000 {
+ cbass_mcu: bus@28380000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
@@ -106,7 +106,7 @@ cbass_mcu: interconnect@28380000 {
<0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/
<0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/
- cbass_wakeup: interconnect@42040000 {
+ cbass_wakeup: bus@42040000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index b8a8a0fc..d12dd89f 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -29,7 +29,7 @@ reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
- secure_ddr: secure_ddr@9e800000 {
+ secure_ddr: secure-ddr@9e800000 {
reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */
alignment = <0x1000>;
no-map;
@@ -70,14 +70,14 @@ AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
>;
};
- push_button_pins_default: push_button__pins_default {
+ push_button_pins_default: push-button-pins-default {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */
AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */
>;
};
- mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins_default {
+ mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */
@@ -93,13 +93,13 @@ AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
>;
};
- wkup_pca554_default: wkup_pca554_default {
+ wkup_pca554_default: wkup-pca554-default {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
>;
};
- mcu_cpsw_pins_default: mcu_cpsw_pins_default {
+ mcu_cpsw_pins_default: mcu-cpsw-pins-default {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */
AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */
@@ -116,7 +116,7 @@ AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */
>;
};
- mcu_mdio_pins_default: mcu_mdio1_pins_default {
+ mcu_mdio_pins_default: mcu-mdio1-pins-default {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
@@ -167,7 +167,7 @@ AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
>;
};
- main_mmc1_pins_default: main_mmc1_pins_default {
+ main_mmc1_pins_default: main-mmc1-pins-default {
pinctrl-single,pins = <
AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */
AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */
@@ -180,7 +180,7 @@ AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */
>;
};
- usb1_pins_default: usb1_pins_default {
+ usb1_pins_default: usb1-pins-default {
pinctrl-single,pins = <
AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
>;
@@ -257,7 +257,7 @@ &main_i2c1 {
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
- ov5640@3c {
+ ov5640: camera@3c {
compatible = "ovti,ov5640";
reg = <0x3c>;
diff --git a/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
index cdc3d40..9021c73 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
@@ -2,13 +2,13 @@
#include <dt-bindings/thermal/thermal.h>
-mpu0_thermal: mpu0_thermal {
+mpu0_thermal: mpu0-thermal {
polling-delay-passive = <250>; /* milliseconds */
polling-delay = <500>; /* milliseconds */
thermal-sensors = <&wkup_vtm0 0>;
trips {
- mpu0_crit: mpu0_crit {
+ mpu0_crit: mpu0-crit {
temperature = <125000>; /* milliCelsius */
hysteresis = <2000>; /* milliCelsius */
type = "critical";
@@ -16,13 +16,13 @@ mpu0_crit: mpu0_crit {
};
};
-mpu1_thermal: mpu1_thermal {
+mpu1_thermal: mpu1-thermal {
polling-delay-passive = <250>; /* milliseconds */
polling-delay = <500>; /* milliseconds */
thermal-sensors = <&wkup_vtm0 1>;
trips {
- mpu1_crit: mpu1_crit {
+ mpu1_crit: mpu1-crit {
temperature = <125000>; /* milliCelsius */
hysteresis = <2000>; /* milliCelsius */
type = "critical";
@@ -30,13 +30,13 @@ mpu1_crit: mpu1_crit {
};
};
-mcu_thermal: mcu_thermal {
+mcu_thermal: mcu-thermal {
polling-delay-passive = <250>; /* milliseconds */
polling-delay = <500>; /* milliseconds */
thermal-sensors = <&wkup_vtm0 2>;
trips {
- mcu_crit: mcu_crit {
+ mcu_crit: mcu-crit {
temperature = <125000>; /* milliCelsius */
hysteresis = <2000>; /* milliCelsius */
type = "critical";
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
new file mode 100644
index 0000000..ef03e76
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j7200-som-p0.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/mux/ti-serdes.h>
+
+/ {
+ chosen {
+ stdout-path = "serial2:115200n8";
+ bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
+ };
+};
+
+&wkup_pmx0 {
+ mcu_cpsw_pins_default: mcu-cpsw-pins-default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
+ J721E_WKUP_IOPAD(0x006c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
+ J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
+ J721E_WKUP_IOPAD(0x0074, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
+ J721E_WKUP_IOPAD(0x0078, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
+ J721E_WKUP_IOPAD(0x007c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
+ J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
+ J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
+ J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
+ J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
+ J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_TXC */
+ J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
+ >;
+ };
+
+ mcu_mdio_pins_default: mcu-mdio1-pins-default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
+ J721E_WKUP_IOPAD(0x0098, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
+ >;
+ };
+};
+
+&main_pmx0 {
+ main_i2c0_pins_default: main-i2c0-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
+ J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
+ >;
+ };
+
+ main_i2c1_pins_default: main-i2c1-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0xdc, PIN_INPUT_PULLUP, 3) /* (U3) ECAP0_IN_APWM_OUT.I2C1_SCL */
+ J721E_IOPAD(0xe0, PIN_INPUT_PULLUP, 3) /* (T3) EXT_REFCLK1.I2C1_SDA */
+ >;
+ };
+
+ main_mmc1_pins_default: main-mmc1-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x104, PIN_INPUT, 0) /* (M20) MMC1_CMD */
+ J721E_IOPAD(0x100, PIN_INPUT, 0) /* (P21) MMC1_CLK */
+ J721E_IOPAD(0xfc, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
+ J721E_IOPAD(0xf8, PIN_INPUT, 0) /* (M19) MMC1_DAT0 */
+ J721E_IOPAD(0xf4, PIN_INPUT, 0) /* (N21) MMC1_DAT1 */
+ J721E_IOPAD(0xf0, PIN_INPUT, 0) /* (N20) MMC1_DAT2 */
+ J721E_IOPAD(0xec, PIN_INPUT, 0) /* (N19) MMC1_DAT3 */
+ J721E_IOPAD(0xe4, PIN_INPUT, 8) /* (V1) TIMER_IO0.MMC1_SDCD */
+ >;
+ };
+
+ main_usbss0_pins_default: main-usbss0-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
+ >;
+ };
+};
+
+&wkup_uart0 {
+ /* Wakeup UART is used by System firmware */
+ status = "disabled";
+};
+
+&main_uart0 {
+ /* Shared with ATF on this platform */
+ power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+};
+
+&main_uart2 {
+ /* MAIN UART 2 is used by R5F firmware */
+ status = "disabled";
+};
+
+&main_uart3 {
+ /* UART not brought out */
+ status = "disabled";
+};
+
+&main_uart4 {
+ /* UART not brought out */
+ status = "disabled";
+};
+
+&main_uart5 {
+ /* UART not brought out */
+ status = "disabled";
+};
+
+&main_uart6 {
+ /* UART not brought out */
+ status = "disabled";
+};
+
+&main_uart7 {
+ /* UART not brought out */
+ status = "disabled";
+};
+
+&main_uart8 {
+ /* UART not brought out */
+ status = "disabled";
+};
+
+&main_uart9 {
+ /* UART not brought out */
+ status = "disabled";
+};
+
+&mcu_cpsw {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
+};
+
+&davinci_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+};
+
+&cpsw_port1 {
+ phy-mode = "rgmii-rxid";
+ phy-handle = <&phy0>;
+};
+
+&main_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c0_pins_default>;
+ clock-frequency = <400000>;
+
+ exp1: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ exp2: gpio@22 {
+ compatible = "ti,tca6424";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&main_i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c1_pins_default>;
+ clock-frequency = <400000>;
+
+ exp4: gpio@20 {
+ compatible = "ti,tca6408";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&main_sdhci0 {
+ /* eMMC */
+ non-removable;
+ ti,driver-strength-ohm = <50>;
+ disable-wp;
+};
+
+&main_sdhci1 {
+ /* SD card */
+ pinctrl-0 = <&main_mmc1_pins_default>;
+ pinctrl-names = "default";
+ ti,driver-strength-ohm = <50>;
+ disable-wp;
+};
+
+&serdes_ln_ctrl {
+ idle-states = <J7200_SERDES0_LANE0_PCIE1_LANE0>, <J7200_SERDES0_LANE1_PCIE1_LANE1>,
+ <J7200_SERDES0_LANE2_QSGMII_LANE1>, <J7200_SERDES0_LANE3_IP4_UNUSED>;
+};
+
+&usb_serdes_mux {
+ idle-states = <1>; /* USB0 to SERDES lane 3 */
+};
+
+&usbss0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_usbss0_pins_default>;
+ ti,vbus-divider;
+ ti,usb2-only;
+};
+
+&usb0 {
+ dr_mode = "otg";
+ maximum-speed = "high-speed";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
new file mode 100644
index 0000000..72d6496
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -0,0 +1,449 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+ msmc_ram: sram@70000000 {
+ compatible = "mmio-sram";
+ reg = <0x00 0x70000000 0x00 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00 0x00 0x70000000 0x100000>;
+
+ atf-sram@0 {
+ reg = <0x00 0x20000>;
+ };
+ };
+
+ scm_conf: scm-conf@100000 {
+ compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+ reg = <0x00 0x00100000 0x00 0x1c000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00 0x00 0x00100000 0x1c000>;
+
+ serdes_ln_ctrl: serdes-ln-ctrl@4080 {
+ compatible = "mmio-mux";
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
+ <0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */
+ };
+
+ usb_serdes_mux: mux-controller@4000 {
+ compatible = "mmio-mux";
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x4000 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
+ };
+ };
+
+ gic500: interrupt-controller@1800000 {
+ compatible = "arm,gic-v3";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
+ <0x00 0x01900000 0x00 0x100000>; /* GICR */
+
+ /* vcpumntirq: virtual CPU interface maintenance interrupt */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ gic_its: msi-controller@1820000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0x00 0x01820000 0x00 0x10000>;
+ socionext,synquacer-pre-its = <0x1000000 0x400000>;
+ msi-controller;
+ #msi-cells = <1>;
+ };
+ };
+
+ main_gpio_intr: interrupt-controller0 {
+ compatible = "ti,sci-intr";
+ ti,intr-trigger-type = <1>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ #interrupt-cells = <1>;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <131>;
+ ti,interrupt-ranges = <8 392 56>;
+ };
+
+ main_navss: bus@30000000 {
+ compatible = "simple-mfd";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
+ ti,sci-dev-id = <199>;
+
+ main_navss_intr: interrupt-controller1 {
+ compatible = "ti,sci-intr";
+ ti,intr-trigger-type = <4>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ #interrupt-cells = <1>;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <213>;
+ ti,interrupt-ranges = <0 64 64>,
+ <64 448 64>,
+ <128 672 64>;
+ };
+
+ main_udmass_inta: msi-controller@33d00000 {
+ compatible = "ti,sci-inta";
+ reg = <0x00 0x33d00000 0x00 0x100000>;
+ interrupt-controller;
+ #interrupt-cells = <0>;
+ interrupt-parent = <&main_navss_intr>;
+ msi-controller;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <209>;
+ ti,interrupt-ranges = <0 0 256>;
+ };
+
+ secure_proxy_main: mailbox@32c00000 {
+ compatible = "ti,am654-secure-proxy";
+ #mbox-cells = <1>;
+ reg-names = "target_data", "rt", "scfg";
+ reg = <0x00 0x32c00000 0x00 0x100000>,
+ <0x00 0x32400000 0x00 0x100000>,
+ <0x00 0x32800000 0x00 0x100000>;
+ interrupt-names = "rx_011";
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ main_ringacc: ringacc@3c000000 {
+ compatible = "ti,am654-navss-ringacc";
+ reg = <0x00 0x3c000000 0x00 0x400000>,
+ <0x00 0x38000000 0x00 0x400000>,
+ <0x00 0x31120000 0x00 0x100>,
+ <0x00 0x33000000 0x00 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+ ti,num-rings = <1024>;
+ ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <211>;
+ msi-parent = <&main_udmass_inta>;
+ };
+
+ main_udmap: dma-controller@31150000 {
+ compatible = "ti,j721e-navss-main-udmap";
+ reg = <0x00 0x31150000 0x00 0x100>,
+ <0x00 0x34000000 0x00 0x100000>,
+ <0x00 0x35000000 0x00 0x100000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt";
+ msi-parent = <&main_udmass_inta>;
+ #dma-cells = <1>;
+
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <212>;
+ ti,ringacc = <&main_ringacc>;
+
+ ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+ <0x0f>, /* TX_HCHAN */
+ <0x10>; /* TX_UHCHAN */
+ ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+ <0x0b>, /* RX_HCHAN */
+ <0x0c>; /* RX_UHCHAN */
+ ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+ };
+
+ cpts@310d0000 {
+ compatible = "ti,j721e-cpts";
+ reg = <0x00 0x310d0000 0x00 0x400>;
+ reg-names = "cpts";
+ clocks = <&k3_clks 201 1>;
+ clock-names = "cpts";
+ interrupts-extended = <&main_navss_intr 391>;
+ interrupt-names = "cpts";
+ ti,cpts-periodic-outputs = <6>;
+ ti,cpts-ext-ts-inputs = <8>;
+ };
+ };
+
+ main_pmx0: pinctrl@11c000 {
+ compatible = "pinctrl-single";
+ /* Proxy 0 addressing */
+ reg = <0x00 0x11c000 0x00 0x2b4>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ main_uart0: serial@2800000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02800000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 146 2>;
+ clock-names = "fclk";
+ };
+
+ main_uart1: serial@2810000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02810000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 278 2>;
+ clock-names = "fclk";
+ };
+
+ main_uart2: serial@2820000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02820000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 279 2>;
+ clock-names = "fclk";
+ };
+
+ main_uart3: serial@2830000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02830000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 280 2>;
+ clock-names = "fclk";
+ };
+
+ main_uart4: serial@2840000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02840000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 281 2>;
+ clock-names = "fclk";
+ };
+
+ main_uart5: serial@2850000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02850000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 282 2>;
+ clock-names = "fclk";
+ };
+
+ main_uart6: serial@2860000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02860000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 283 2>;
+ clock-names = "fclk";
+ };
+
+ main_uart7: serial@2870000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02870000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 284 2>;
+ clock-names = "fclk";
+ };
+
+ main_uart8: serial@2880000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02880000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 285 2>;
+ clock-names = "fclk";
+ };
+
+ main_uart9: serial@2890000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02890000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 286 2>;
+ clock-names = "fclk";
+ };
+
+ main_i2c0: i2c@2000000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x00 0x2000000 0x00 0x100>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 187 1>;
+ power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
+ };
+
+ main_i2c1: i2c@2010000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x00 0x2010000 0x00 0x100>;
+ interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 188 1>;
+ power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c2: i2c@2020000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x00 0x2020000 0x00 0x100>;
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 189 1>;
+ power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c3: i2c@2030000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x00 0x2030000 0x00 0x100>;
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 190 1>;
+ power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c4: i2c@2040000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x00 0x2040000 0x00 0x100>;
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 191 1>;
+ power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c5: i2c@2050000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x00 0x2050000 0x00 0x100>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 192 1>;
+ power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c6: i2c@2060000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x00 0x2060000 0x00 0x100>;
+ interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 193 1>;
+ power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_sdhci0: mmc@4f80000 {
+ compatible = "ti,j7200-sdhci-8bit", "ti,j721e-sdhci-8bit";
+ reg = <0x00 0x04f80000 0x00 0x260>, <0x00 0x4f88000 0x00 0x134>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
+ clock-names = "clk_xin", "clk_ahb";
+ clocks = <&k3_clks 91 3>, <&k3_clks 91 0>;
+ ti,otap-del-sel-legacy = <0x0>;
+ ti,otap-del-sel-mmc-hs = <0x0>;
+ ti,otap-del-sel-ddr52 = <0x6>;
+ ti,otap-del-sel-hs200 = <0x8>;
+ ti,otap-del-sel-hs400 = <0x0>;
+ ti,strobe-sel = <0x77>;
+ ti,trm-icp = <0x8>;
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ dma-coherent;
+ };
+
+ main_sdhci1: mmc@4fb0000 {
+ compatible = "ti,j7200-sdhci-4bit", "ti,j721e-sdhci-4bit";
+ reg = <0x00 0x04fb0000 0x00 0x260>, <0x00 0x4fb8000 0x00 0x134>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>;
+ clock-names = "clk_xin", "clk_ahb";
+ clocks = <&k3_clks 92 2>, <&k3_clks 92 1>;
+ ti,otap-del-sel-legacy = <0x0>;
+ ti,otap-del-sel-sd-hs = <0x0>;
+ ti,otap-del-sel-sdr12 = <0xf>;
+ ti,otap-del-sel-sdr25 = <0xf>;
+ ti,otap-del-sel-sdr50 = <0xc>;
+ ti,otap-del-sel-sdr104 = <0x5>;
+ ti,otap-del-sel-ddr50 = <0xc>;
+ no-1-8-v;
+ dma-coherent;
+ };
+
+ usbss0: cdns-usb@4104000 {
+ compatible = "ti,j721e-usb";
+ reg = <0x00 0x4104000 0x00 0x100>;
+ dma-coherent;
+ power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 288 12>, <&k3_clks 288 3>;
+ clock-names = "ref", "lpm";
+ assigned-clocks = <&k3_clks 288 12>; /* USB2_REFCLK */
+ assigned-clock-parents = <&k3_clks 288 13>; /* HFOSC0 */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ usb0: usb@6000000 {
+ compatible = "cdns,usb3";
+ reg = <0x00 0x6000000 0x00 0x10000>,
+ <0x00 0x6010000 0x00 0x10000>,
+ <0x00 0x6020000 0x00 0x10000>;
+ reg-names = "otg", "xhci", "dev";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */
+ interrupt-names = "host",
+ "peripheral",
+ "otg";
+ maximum-speed = "super-speed";
+ dr_mode = "otg";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
new file mode 100644
index 0000000..eb2a78a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family MCU/WAKEUP Domain peripherals
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu_wakeup {
+ dmsc: dmsc@44083000 {
+ compatible = "ti,k2g-sci";
+ ti,host-id = <12>;
+
+ mbox-names = "rx", "tx";
+
+ mboxes= <&secure_proxy_main 11>,
+ <&secure_proxy_main 13>;
+
+ reg-names = "debug_messages";
+ reg = <0x00 0x44083000 0x00 0x1000>;
+
+ k3_pds: power-controller {
+ compatible = "ti,sci-pm-domain";
+ #power-domain-cells = <2>;
+ };
+
+ k3_clks: clocks {
+ compatible = "ti,k2g-sci-clk";
+ #clock-cells = <2>;
+ };
+
+ k3_reset: reset-controller {
+ compatible = "ti,sci-reset";
+ #reset-cells = <2>;
+ };
+ };
+
+ mcu_conf: syscon@40f00000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x00 0x40f00000 0x00 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00 0x00 0x40f00000 0x20000>;
+
+ phy_gmii_sel: phy@4040 {
+ compatible = "ti,am654-phy-gmii-sel";
+ reg = <0x4040 0x4>;
+ #phy-cells = <1>;
+ };
+ };
+
+ chipid@43000014 {
+ compatible = "ti,am654-chipid";
+ reg = <0x00 0x43000014 0x00 0x4>;
+ };
+
+ wkup_pmx0: pinctrl@4301c000 {
+ compatible = "pinctrl-single";
+ /* Proxy 0 addressing */
+ reg = <0x00 0x4301c000 0x00 0x178>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ mcu_ram: sram@41c00000 {
+ compatible = "mmio-sram";
+ reg = <0x00 0x41c00000 0x00 0x100000>;
+ ranges = <0x00 0x00 0x41c00000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ wkup_uart0: serial@42300000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x42300000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 287 2>;
+ clock-names = "fclk";
+ };
+
+ mcu_uart0: serial@40a00000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x40a00000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <96000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 149 2>;
+ clock-names = "fclk";
+ };
+
+ wkup_gpio_intr: interrupt-controller2 {
+ compatible = "ti,sci-intr";
+ ti,intr-trigger-type = <1>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ #interrupt-cells = <1>;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <137>;
+ ti,interrupt-ranges = <16 960 16>;
+ };
+
+ mcu_navss: bus@28380000 {
+ compatible = "simple-mfd";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
+ dma-coherent;
+ dma-ranges;
+ ti,sci-dev-id = <232>;
+
+ mcu_ringacc: ringacc@2b800000 {
+ compatible = "ti,am654-navss-ringacc";
+ reg = <0x00 0x2b800000 0x00 0x400000>,
+ <0x00 0x2b000000 0x00 0x400000>,
+ <0x00 0x28590000 0x00 0x100>,
+ <0x00 0x2a500000 0x00 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+ ti,num-rings = <286>;
+ ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <235>;
+ msi-parent = <&main_udmass_inta>;
+ };
+
+ mcu_udmap: dma-controller@285c0000 {
+ compatible = "ti,j721e-navss-mcu-udmap";
+ reg = <0x00 0x285c0000 0x00 0x100>,
+ <0x00 0x2a800000 0x00 0x40000>,
+ <0x00 0x2aa00000 0x00 0x40000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt";
+ msi-parent = <&main_udmass_inta>;
+ #dma-cells = <1>;
+
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <236>;
+ ti,ringacc = <&mcu_ringacc>;
+
+ ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+ <0x0f>; /* TX_HCHAN */
+ ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+ <0x0b>; /* RX_HCHAN */
+ ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+ };
+ };
+
+ mcu_cpsw: ethernet@46000000 {
+ compatible = "ti,j721e-cpsw-nuss";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x00 0x46000000 0x00 0x200000>;
+ reg-names = "cpsw_nuss";
+ ranges = <0x00 0x00 0x00 0x46000000 0x00 0x200000>;
+ dma-coherent;
+ clocks = <&k3_clks 18 21>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>;
+
+ dmas = <&mcu_udmap 0xf000>,
+ <&mcu_udmap 0xf001>,
+ <&mcu_udmap 0xf002>,
+ <&mcu_udmap 0xf003>,
+ <&mcu_udmap 0xf004>,
+ <&mcu_udmap 0xf005>,
+ <&mcu_udmap 0xf006>,
+ <&mcu_udmap 0xf007>,
+ <&mcu_udmap 0x7000>;
+ dma-names = "tx0", "tx1", "tx2", "tx3",
+ "tx4", "tx5", "tx6", "tx7",
+ "rx";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpsw_port1: port@1 {
+ reg = <1>;
+ ti,mac-only;
+ label = "port1";
+ ti,syscon-efuse = <&mcu_conf 0x200>;
+ phys = <&phy_gmii_sel 1>;
+ };
+ };
+
+ davinci_mdio: mdio@f00 {
+ compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+ reg = <0x00 0xf00 0x00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 18 21>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ };
+
+ cpts@3d000 {
+ compatible = "ti,am65-cpts";
+ reg = <0x00 0x3d000 0x00 0x400>;
+ clocks = <&k3_clks 18 2>;
+ clock-names = "cpts";
+ interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cpts";
+ ti,cpts-ext-ts-inputs = <4>;
+ ti,cpts-periodic-outputs = <2>;
+ };
+ };
+
+ mcu_i2c0: i2c@40b00000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x00 0x40b00000 0x00 0x100>;
+ interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 194 1>;
+ power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ mcu_i2c1: i2c@40b10000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x00 0x40b10000 0x00 0x100>;
+ interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 195 1>;
+ power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ wkup_i2c0: i2c@42120000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x00 0x42120000 0x00 0x100>;
+ interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 197 1>;
+ power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
+ };
+
+ fss: syscon@47000000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x00 0x47000000 0x00 0x100>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ hbmc_mux: hbmc-mux {
+ compatible = "mmio-mux";
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x4 0x2>; /* HBMC select */
+ };
+
+ hbmc: hyperbus@47034000 {
+ compatible = "ti,am654-hbmc";
+ reg = <0x00 0x47034000 0x00 0x100>,
+ <0x05 0x00000000 0x01 0x0000000>;
+ power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 102 0>;
+ assigned-clocks = <&k3_clks 102 5>;
+ assigned-clock-rates = <333333333>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ mux-controls = <&hbmc_mux 0>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
new file mode 100644
index 0000000..6a98ba4
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j7200.dtsi"
+
+/ {
+ memory@80000000 {
+ device_type = "memory";
+ /* 4G RAM */
+ reg = <0x00 0x80000000 0x00 0x80000000>,
+ <0x08 0x80000000 0x00 0x80000000>;
+ };
+
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ secure_ddr: optee@9e800000 {
+ reg = <0x00 0x9e800000 0x00 0x01800000>;
+ alignment = <0x1000>;
+ no-map;
+ };
+ };
+};
+
+&wkup_pmx0 {
+ mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-pins-default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (B6) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */
+ J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C8) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */
+ J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* (D6) MCU_OSPI0_CSn0.MCU_HYPERBUS0_CSn0 */
+ J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* (D7) MCU_OSPI0_CSn1.MCU_HYPERBUS0_RESETn */
+ J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1) /* (B7) MCU_OSPI0_DQS.MCU_HYPERBUS0_RWDS */
+ J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1) /* (D8) MCU_OSPI0_D0.MCU_HYPERBUS0_DQ0 */
+ J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1) /* (C7) MCU_OSPI0_D1.MCU_HYPERBUS0_DQ1 */
+ J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1) /* (C5) MCU_OSPI0_D2.MCU_HYPERBUS0_DQ2 */
+ J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1) /* (A5) MCU_OSPI0_D3.MCU_HYPERBUS0_DQ3 */
+ J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1) /* (A6) MCU_OSPI0_D4.MCU_HYPERBUS0_DQ4 */
+ J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* (B8) MCU_OSPI0_D5.MCU_HYPERBUS0_DQ5 */
+ J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* (A8) MCU_OSPI0_D6.MCU_HYPERBUS0_DQ6 */
+ J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (A7) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */
+ >;
+ };
+};
+
+&hbmc {
+ /* OSPI and HBMC are muxed inside FSS, Bootloader will enable
+ * appropriate node based on board detection
+ */
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_fss0_hpb0_pins_default>;
+ ranges = <0x00 0x00 0x05 0x00000000 0x4000000>, /* 64MB Flash on CS0 */
+ <0x01 0x00 0x05 0x04000000 0x800000>; /* 8MB RAM on CS1 */
+
+ flash@0,0 {
+ compatible = "cypress,hyperflash", "cfi-flash";
+ reg = <0x00 0x00 0x4000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
new file mode 100644
index 0000000..66169bc
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/k3.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+/ {
+ model = "Texas Instruments K3 J7200 SoC";
+ compatible = "ti,j7200";
+ interrupt-parent = <&gic500>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &wkup_uart0;
+ serial1 = &mcu_uart0;
+ serial2 = &main_uart0;
+ serial3 = &main_uart1;
+ serial4 = &main_uart2;
+ serial5 = &main_uart3;
+ serial6 = &main_uart4;
+ serial7 = &main_uart5;
+ serial8 = &main_uart6;
+ serial9 = &main_uart7;
+ serial10 = &main_uart8;
+ serial11 = &main_uart9;
+ };
+
+ chosen { };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu-map {
+ cluster0: cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+
+ };
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a72";
+ reg = <0x000>;
+ device_type = "cpu";
+ enable-method = "psci";
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&L2_0>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a72";
+ reg = <0x001>;
+ device_type = "cpu";
+ enable-method = "psci";
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&L2_0>;
+ };
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x100000>;
+ cache-line-size = <64>;
+ cache-sets = <2048>;
+ next-level-cache = <&msmc_l3>;
+ };
+
+ msmc_l3: l3-cache0 {
+ compatible = "cache";
+ cache-level = <3>;
+ };
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+
+ psci: psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+ };
+
+ a72_timer0: timer-cl0-cpu0 {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+ };
+
+ pmu: pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ cbass_main: bus@100000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+ <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+ <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
+ <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
+ <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+ <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
+ <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
+ <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
+
+ /* MCUSS_WKUP Range */
+ <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+ <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
+ <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
+ <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+ <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+ <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
+ <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+ <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+ <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
+ <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
+ <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+
+ cbass_mcu_wakeup: bus@28380000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+ <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
+ <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+ <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+ <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+ <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
+ <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
+ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+ <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
+ <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
+ <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
+ <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3 */
+ };
+ };
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-j7200-main.dtsi"
+#include "k3-j7200-mcu-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index e8fc01d..52e1211 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -86,13 +86,13 @@ sound0: sound@0 {
};
&main_pmx0 {
- sw10_button_pins_default: sw10_button_pins_default {
+ sw10_button_pins_default: sw10-button-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */
>;
};
- main_mmc1_pins_default: main_mmc1_pins_default {
+ main_mmc1_pins_default: main-mmc1-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
@@ -106,14 +106,14 @@ J721E_IOPAD(0x25c, PIN_INPUT, 0) /* (R28) MMC1_SDWP */
>;
};
- main_usbss0_pins_default: main_usbss0_pins_default {
+ main_usbss0_pins_default: main-usbss0-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */
J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */
>;
};
- main_usbss1_pins_default: main_usbss1_pins_default {
+ main_usbss1_pins_default: main-usbss1-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
>;
@@ -153,7 +153,7 @@ J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */
>;
};
- mcasp10_pins_default: mcasp10_pins_default {
+ mcasp10_pins_default: mcasp10-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */
J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */
@@ -167,7 +167,7 @@ J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 12) /* (W29) RGMII6_TXC.MCASP10_AXR6 */
>;
};
- audi_ext_refclk2_pins_default: audi_ext_refclk2_pins_default {
+ audi_ext_refclk2_pins_default: audi-ext-refclk2-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */
>;
@@ -175,7 +175,7 @@ J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */
};
&wkup_pmx0 {
- sw11_button_pins_default: sw11_button_pins_default {
+ sw11_button_pins_default: sw11-button-pins-default {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
>;
@@ -194,7 +194,7 @@ J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */
>;
};
- mcu_cpsw_pins_default: mcu_cpsw_pins_default {
+ mcu_cpsw_pins_default: mcu-cpsw-pins-default {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
@@ -211,7 +211,7 @@ J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
>;
};
- mcu_mdio_pins_default: mcu_mdio1_pins_default {
+ mcu_mdio_pins_default: mcu-mdio1-pins-default {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* MCU_MDIO0_MDC */
J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_MDIO0_MDIO */
@@ -286,99 +286,6 @@ &wkup_gpio1 {
status = "disabled";
};
-&mailbox0_cluster0 {
- interrupts = <436>;
-
- mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- interrupts = <432>;
-
- mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster2 {
- interrupts = <428>;
-
- mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster3 {
- interrupts = <424>;
-
- mbox_c66_0: mbox-c66-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_c66_1: mbox-c66-1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster4 {
- interrupts = <420>;
-
- mbox_c71_0: mbox-c71-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mailbox0_cluster5 {
- status = "disabled";
-};
-
-&mailbox0_cluster6 {
- status = "disabled";
-};
-
-&mailbox0_cluster7 {
- status = "disabled";
-};
-
-&mailbox0_cluster8 {
- status = "disabled";
-};
-
-&mailbox0_cluster9 {
- status = "disabled";
-};
-
-&mailbox0_cluster10 {
- status = "disabled";
-};
-
-&mailbox0_cluster11 {
- status = "disabled";
-};
-
&main_sdhci0 {
/* eMMC */
non-removable;
@@ -404,11 +311,12 @@ &usb_serdes_mux {
};
&serdes_ln_ctrl {
- idle-states = <SERDES0_LANE0_PCIE0_LANE0>, <SERDES0_LANE1_PCIE0_LANE1>,
- <SERDES1_LANE0_PCIE1_LANE0>, <SERDES1_LANE1_PCIE1_LANE1>,
- <SERDES2_LANE0_PCIE2_LANE0>, <SERDES2_LANE1_PCIE2_LANE1>,
- <SERDES3_LANE0_USB3_0_SWAP>, <SERDES3_LANE1_USB3_0>,
- <SERDES4_LANE0_EDP_LANE0>, <SERDES4_LANE1_EDP_LANE1>, <SERDES4_LANE2_EDP_LANE2>, <SERDES4_LANE3_EDP_LANE3>;
+ idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_PCIE0_LANE1>,
+ <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
+ <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
+ <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
+ <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
+ <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
};
&serdes_wiz3 {
@@ -500,7 +408,7 @@ exp2: gpio@22 {
gpio-controller;
#gpio-cells = <2>;
- p09 {
+ p09-hog {
/* P11 - MCASP/TRACE_MUX_S0 */
gpio-hog;
gpios = <9 GPIO_ACTIVE_HIGH>;
@@ -508,7 +416,7 @@ p09 {
line-name = "MCASP/TRACE_MUX_S0";
};
- p10 {
+ p10-hog {
/* P12 - MCASP/TRACE_MUX_S1 */
gpio-hog;
gpios = <10 GPIO_ACTIVE_HIGH>;
@@ -651,3 +559,83 @@ &mcasp10 {
status = "okay";
};
+
+&serdes0 {
+ serdes0_pcie_link: link@0 {
+ reg = <0>;
+ cdns,num-lanes = <1>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_PCIE>;
+ resets = <&serdes_wiz0 1>;
+ };
+};
+
+&serdes1 {
+ serdes1_pcie_link: link@0 {
+ reg = <0>;
+ cdns,num-lanes = <2>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_PCIE>;
+ resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
+ };
+};
+
+&serdes2 {
+ serdes2_pcie_link: link@0 {
+ reg = <0>;
+ cdns,num-lanes = <2>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_PCIE>;
+ resets = <&serdes_wiz2 1>, <&serdes_wiz2 2>;
+ };
+};
+
+&pcie0_rc {
+ reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie-phy";
+ num-lanes = <1>;
+};
+
+&pcie1_rc {
+ reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+ phys = <&serdes1_pcie_link>;
+ phy-names = "pcie-phy";
+ num-lanes = <2>;
+};
+
+&pcie2_rc {
+ reset-gpios = <&exp2 20 GPIO_ACTIVE_HIGH>;
+ phys = <&serdes2_pcie_link>;
+ phy-names = "pcie-phy";
+ num-lanes = <2>;
+};
+
+&pcie0_ep {
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie-phy";
+ num-lanes = <1>;
+ status = "disabled";
+};
+
+&pcie1_ep {
+ phys = <&serdes1_pcie_link>;
+ phy-names = "pcie-phy";
+ num-lanes = <2>;
+ status = "disabled";
+};
+
+&pcie2_ep {
+ phys = <&serdes2_pcie_link>;
+ phy-names = "pcie-phy";
+ num-lanes = <2>;
+ status = "disabled";
+};
+
+&pcie3_rc {
+ status = "disabled";
+};
+
+&pcie3_ep {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 12ceea9..e2a96b2 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -6,7 +6,7 @@
*/
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/mux/mux.h>
-#include <dt-bindings/mux/mux-j721e-wiz.h>
+#include <dt-bindings/mux/ti-serdes.h>
&cbass_main {
msmc_ram: sram@70000000 {
@@ -28,7 +28,39 @@ scm_conf: scm-conf@100000 {
#size-cells = <1>;
ranges = <0x0 0x0 0x00100000 0x1c000>;
- serdes_ln_ctrl: serdes-ln-ctrl@4080 {
+ pcie0_ctrl: syscon@4070 {
+ compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+ reg = <0x00004070 0x4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x4070 0x4070 0x4>;
+ };
+
+ pcie1_ctrl: syscon@4074 {
+ compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+ reg = <0x00004074 0x4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x4074 0x4074 0x4>;
+ };
+
+ pcie2_ctrl: syscon@4078 {
+ compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+ reg = <0x00004078 0x4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x4078 0x4078 0x4>;
+ };
+
+ pcie3_ctrl: syscon@407c {
+ compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+ reg = <0x0000407c 0x4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x407c 0x407c 0x4>;
+ };
+
+ serdes_ln_ctrl: mux@4080 {
compatible = "mmio-mux";
reg = <0x00004080 0x50>;
#mux-control-cells = <1>;
@@ -38,11 +70,12 @@ serdes_ln_ctrl: serdes-ln-ctrl@4080 {
<0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */
<0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>;
/* SERDES4 lane0/1/2/3 select */
- idle-states = <SERDES0_LANE0_PCIE0_LANE0>, <SERDES0_LANE1_PCIE0_LANE1>,
- <SERDES1_LANE0_PCIE1_LANE0>, <SERDES1_LANE1_PCIE1_LANE1>,
- <SERDES2_LANE0_PCIE2_LANE0>, <SERDES2_LANE1_PCIE2_LANE1>,
- <MUX_IDLE_AS_IS>, <SERDES3_LANE1_USB3_0>,
- <SERDES4_LANE0_EDP_LANE0>, <SERDES4_LANE1_EDP_LANE1>, <SERDES4_LANE2_EDP_LANE2>, <SERDES4_LANE3_EDP_LANE3>;
+ idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_PCIE0_LANE1>,
+ <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
+ <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
+ <MUX_IDLE_AS_IS>, <J721E_SERDES3_LANE1_USB3_0>,
+ <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
+ <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
};
usb_serdes_mux: mux-controller@4000 {
@@ -86,7 +119,7 @@ main_gpio_intr: interrupt-controller0 {
ti,interrupt-ranges = <8 392 56>;
};
- main_navss {
+ main-navss {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
@@ -304,7 +337,30 @@ cpts@310d0000 {
};
};
- main_pmx0: pinmux@11c000 {
+ main_crypto: crypto@4e00000 {
+ compatible = "ti,j721e-sa2ul";
+ reg = <0x0 0x4e00000 0x0 0x1200>;
+ power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>;
+
+ status = "okay";
+
+ dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
+ <&main_udmap 0x4001>;
+ dma-names = "tx", "rx1", "rx2";
+ dma-coherent;
+
+ rng: rng@4e10000 {
+ compatible = "inside-secure,safexcel-eip76";
+ reg = <0x0 0x4e10000 0x0 0x7d>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 264 1>;
+ };
+ };
+
+ main_pmx0: pinctrl@11c000 {
compatible = "pinctrl-single";
/* Proxy 0 addressing */
reg = <0x0 0x11c000 0x0 0x2b4>;
@@ -553,6 +609,204 @@ serdes3: serdes@5030000 {
};
};
+ pcie0_rc: pcie@2900000 {
+ compatible = "ti,j721e-pcie-host";
+ reg = <0x00 0x02900000 0x00 0x1000>,
+ <0x00 0x02907000 0x00 0x400>,
+ <0x00 0x0d000000 0x00 0x00800000>,
+ <0x00 0x10000000 0x00 0x00001000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+ device_type = "pci";
+ ti,syscon-pcie-ctrl = <&pcie0_ctrl>;
+ max-link-speed = <3>;
+ num-lanes = <2>;
+ power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 239 1>;
+ clock-names = "fck";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xf>;
+ vendor-id = <0x104c>;
+ device-id = <0xb00d>;
+ msi-map = <0x0 &gic_its 0x0 0x10000>;
+ dma-coherent;
+ ranges = <0x01000000 0x0 0x10001000 0x0 0x10001000 0x0 0x0010000>,
+ <0x02000000 0x0 0x10011000 0x0 0x10011000 0x0 0x7fef000>;
+ dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+ };
+
+ pcie0_ep: pcie-ep@2900000 {
+ compatible = "ti,j721e-pcie-ep";
+ reg = <0x00 0x02900000 0x00 0x1000>,
+ <0x00 0x02907000 0x00 0x400>,
+ <0x00 0x0d000000 0x00 0x00800000>,
+ <0x00 0x10000000 0x00 0x08000000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+ ti,syscon-pcie-ctrl = <&pcie0_ctrl>;
+ max-link-speed = <3>;
+ num-lanes = <2>;
+ power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 239 1>;
+ clock-names = "fck";
+ cdns,max-outbound-regions = <16>;
+ max-functions = /bits/ 8 <6>;
+ max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>;
+ dma-coherent;
+ };
+
+ pcie1_rc: pcie@2910000 {
+ compatible = "ti,j721e-pcie-host";
+ reg = <0x00 0x02910000 0x00 0x1000>,
+ <0x00 0x02917000 0x00 0x400>,
+ <0x00 0x0d800000 0x00 0x00800000>,
+ <0x00 0x18000000 0x00 0x00001000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+ device_type = "pci";
+ ti,syscon-pcie-ctrl = <&pcie1_ctrl>;
+ max-link-speed = <3>;
+ num-lanes = <2>;
+ power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 240 1>;
+ clock-names = "fck";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xf>;
+ vendor-id = <0x104c>;
+ device-id = <0xb00d>;
+ msi-map = <0x0 &gic_its 0x10000 0x10000>;
+ dma-coherent;
+ ranges = <0x01000000 0x0 0x18001000 0x0 0x18001000 0x0 0x0010000>,
+ <0x02000000 0x0 0x18011000 0x0 0x18011000 0x0 0x7fef000>;
+ dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+ };
+
+ pcie1_ep: pcie-ep@2910000 {
+ compatible = "ti,j721e-pcie-ep";
+ reg = <0x00 0x02910000 0x00 0x1000>,
+ <0x00 0x02917000 0x00 0x400>,
+ <0x00 0x0d800000 0x00 0x00800000>,
+ <0x00 0x18000000 0x00 0x08000000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+ ti,syscon-pcie-ctrl = <&pcie1_ctrl>;
+ max-link-speed = <3>;
+ num-lanes = <2>;
+ power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 240 1>;
+ clock-names = "fck";
+ cdns,max-outbound-regions = <16>;
+ max-functions = /bits/ 8 <6>;
+ max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>;
+ dma-coherent;
+ };
+
+ pcie2_rc: pcie@2920000 {
+ compatible = "ti,j721e-pcie-host";
+ reg = <0x00 0x02920000 0x00 0x1000>,
+ <0x00 0x02927000 0x00 0x400>,
+ <0x00 0x0e000000 0x00 0x00800000>,
+ <0x44 0x00000000 0x00 0x00001000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
+ device_type = "pci";
+ ti,syscon-pcie-ctrl = <&pcie2_ctrl>;
+ max-link-speed = <3>;
+ num-lanes = <2>;
+ power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 241 1>;
+ clock-names = "fck";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xf>;
+ vendor-id = <0x104c>;
+ device-id = <0xb00d>;
+ msi-map = <0x0 &gic_its 0x20000 0x10000>;
+ dma-coherent;
+ ranges = <0x01000000 0x0 0x00001000 0x44 0x00001000 0x0 0x0010000>,
+ <0x02000000 0x0 0x00011000 0x44 0x00011000 0x0 0x7fef000>;
+ dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+ };
+
+ pcie2_ep: pcie-ep@2920000 {
+ compatible = "ti,j721e-pcie-ep";
+ reg = <0x00 0x02920000 0x00 0x1000>,
+ <0x00 0x02927000 0x00 0x400>,
+ <0x00 0x0e000000 0x00 0x00800000>,
+ <0x44 0x00000000 0x00 0x08000000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
+ ti,syscon-pcie-ctrl = <&pcie2_ctrl>;
+ max-link-speed = <3>;
+ num-lanes = <2>;
+ power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 241 1>;
+ clock-names = "fck";
+ cdns,max-outbound-regions = <16>;
+ max-functions = /bits/ 8 <6>;
+ max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>;
+ dma-coherent;
+ };
+
+ pcie3_rc: pcie@2930000 {
+ compatible = "ti,j721e-pcie-host";
+ reg = <0x00 0x02930000 0x00 0x1000>,
+ <0x00 0x02937000 0x00 0x400>,
+ <0x00 0x0e800000 0x00 0x00800000>,
+ <0x44 0x10000000 0x00 0x00001000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
+ device_type = "pci";
+ ti,syscon-pcie-ctrl = <&pcie3_ctrl>;
+ max-link-speed = <3>;
+ num-lanes = <2>;
+ power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 242 1>;
+ clock-names = "fck";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xf>;
+ vendor-id = <0x104c>;
+ device-id = <0xb00d>;
+ msi-map = <0x0 &gic_its 0x30000 0x10000>;
+ dma-coherent;
+ ranges = <0x01000000 0x0 0x00001000 0x44 0x10001000 0x0 0x0010000>,
+ <0x02000000 0x0 0x00011000 0x44 0x10011000 0x0 0x7fef000>;
+ dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+ };
+
+ pcie3_ep: pcie-ep@2930000 {
+ compatible = "ti,j721e-pcie-ep";
+ reg = <0x00 0x02930000 0x00 0x1000>,
+ <0x00 0x02937000 0x00 0x400>,
+ <0x00 0x0e800000 0x00 0x00800000>,
+ <0x44 0x10000000 0x00 0x08000000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
+ ti,syscon-pcie-ctrl = <&pcie3_ctrl>;
+ max-link-speed = <3>;
+ num-lanes = <2>;
+ power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 242 1>;
+ clock-names = "fck";
+ cdns,max-outbound-regions = <16>;
+ max-functions = /bits/ 8 <6>;
+ max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>;
+ dma-coherent;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ };
+
main_uart0: serial@2800000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02800000 0x00 0x100>;
@@ -865,7 +1119,7 @@ main_sdhci2: sdhci@4f98000 {
no-1-8-v;
};
- usbss0: cdns_usb@4104000 {
+ usbss0: cdns-usb@4104000 {
compatible = "ti,j721e-usb";
reg = <0x00 0x4104000 0x00 0x100>;
dma-coherent;
@@ -895,7 +1149,7 @@ usb0: usb@6000000 {
};
};
- usbss1: cdns_usb@4114000 {
+ usbss1: cdns-usb@4114000 {
compatible = "ti,j721e-usb";
reg = <0x00 0x4114000 0x00 0x100>;
dma-coherent;
@@ -1326,4 +1580,42 @@ watchdog1: watchdog@2210000 {
assigned-clocks = <&k3_clks 253 1>;
assigned-clock-parents = <&k3_clks 253 5>;
};
+
+ c66_0: dsp@4d80800000 {
+ compatible = "ti,j721e-c66-dsp";
+ reg = <0x4d 0x80800000 0x00 0x00048000>,
+ <0x4d 0x80e00000 0x00 0x00008000>,
+ <0x4d 0x80f00000 0x00 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <142>;
+ ti,sci-proc-ids = <0x03 0xff>;
+ resets = <&k3_reset 142 1>;
+ firmware-name = "j7-c66_0-fw";
+ };
+
+ c66_1: dsp@4d81800000 {
+ compatible = "ti,j721e-c66-dsp";
+ reg = <0x4d 0x81800000 0x00 0x00048000>,
+ <0x4d 0x81e00000 0x00 0x00008000>,
+ <0x4d 0x81f00000 0x00 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <143>;
+ ti,sci-proc-ids = <0x04 0xff>;
+ resets = <&k3_reset 143 1>;
+ firmware-name = "j7-c66_1-fw";
+ };
+
+ c71_0: dsp@64800000 {
+ compatible = "ti,j721e-c71-dsp";
+ reg = <0x00 0x64800000 0x00 0x00080000>,
+ <0x00 0x64e00000 0x00 0x0000c000>;
+ reg-names = "l2sram", "l1dram";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <15>;
+ ti,sci-proc-ids = <0x30 0xff>;
+ resets = <&k3_reset 15 1>;
+ firmware-name = "j7-c71_0-fw";
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index c4a48e8..e581cb1 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -53,7 +53,7 @@ chipid@43000014 {
reg = <0x0 0x43000014 0x0 0x4>;
};
- wkup_pmx0: pinmux@4301c000 {
+ wkup_pmx0: pinctrl@4301c000 {
compatible = "pinctrl-single";
/* Proxy 0 addressing */
reg = <0x00 0x4301c000 0x00 0x178>;
@@ -249,7 +249,7 @@ adc {
};
};
- mcu_navss {
+ mcu-navss {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index 8fa3361..5dc3ba7 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -25,11 +25,53 @@ secure_ddr: optee@9e800000 {
alignment = <0x1000>;
no-map;
};
+
+ c66_1_dma_memory_region: c66-dma-memory@a6000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa6000000 0x00 0x100000>;
+ no-map;
+ };
+
+ c66_0_memory_region: c66-memory@a6100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa6100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ c66_0_dma_memory_region: c66-dma-memory@a7000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa7000000 0x00 0x100000>;
+ no-map;
+ };
+
+ c66_1_memory_region: c66-memory@a7100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa7100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ c71_0_dma_memory_region: c71-dma-memory@a8000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa8000000 0x00 0x100000>;
+ no-map;
+ };
+
+ c71_0_memory_region: c71-memory@a8100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa8100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ rtos_ipc_memory_region: ipc-memories@aa000000 {
+ reg = <0x00 0xaa000000 0x00 0x01c00000>;
+ alignment = <0x1000>;
+ no-map;
+ };
};
};
&wkup_pmx0 {
- wkup_i2c0_pins_default: wkup_i2c0_pins_default {
+ wkup_i2c0_pins_default: wkup-i2c0-pins-default {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
@@ -72,3 +114,114 @@ flash@0{
#size-cells = <1>;
};
};
+
+&mailbox0_cluster0 {
+ interrupts = <436>;
+
+ mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster1 {
+ interrupts = <432>;
+
+ mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster2 {
+ interrupts = <428>;
+
+ mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster3 {
+ interrupts = <424>;
+
+ mbox_c66_0: mbox-c66-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_c66_1: mbox-c66-1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster4 {
+ interrupts = <420>;
+
+ mbox_c71_0: mbox-c71-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster5 {
+ status = "disabled";
+};
+
+&mailbox0_cluster6 {
+ status = "disabled";
+};
+
+&mailbox0_cluster7 {
+ status = "disabled";
+};
+
+&mailbox0_cluster8 {
+ status = "disabled";
+};
+
+&mailbox0_cluster9 {
+ status = "disabled";
+};
+
+&mailbox0_cluster10 {
+ status = "disabled";
+};
+
+&mailbox0_cluster11 {
+ status = "disabled";
+};
+
+&c66_0 {
+ mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
+ memory-region = <&c66_0_dma_memory_region>,
+ <&c66_0_memory_region>;
+};
+
+&c66_1 {
+ mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
+ memory-region = <&c66_1_dma_memory_region>,
+ <&c66_1_memory_region>;
+};
+
+&c71_0 {
+ mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
+ memory-region = <&c71_0_dma_memory_region>,
+ <&c71_0_memory_region>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index d035b61..cc483f7 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -120,21 +120,24 @@ pmu: pmu {
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
- cbass_main: interconnect@100000 {
+ cbass_main: bus@100000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
<0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
<0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
- <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */
+ <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
<0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */
<0x00 0x06400000 0x00 0x06400000 0x00 0x00400000>, /* USBSS1 */
<0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
<0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
- <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/
+ <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01800000>, /* PCIe Core*/
+ <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01800000>, /* PCIe Core*/
<0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
<0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
+ <0x44 0x00000000 0x44 0x00000000 0x00 0x08000000>, /* PCIe2 DAT */
+ <0x44 0x10000000 0x44 0x10000000 0x00 0x08000000>, /* PCIe3 DAT */
<0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
<0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>, /* C66_1 */
<0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */
@@ -155,7 +158,7 @@ cbass_main: interconnect@100000 {
<0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
<0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
- cbass_mcu_wakeup: interconnect@28380000 {
+ cbass_mcu_wakeup: bus@28380000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/toshiba/Makefile b/arch/arm64/boot/dts/toshiba/Makefile
new file mode 100644
index 0000000..8cd460d
--- /dev/null
+++ b/arch/arm64/boot/dts/toshiba/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_VISCONTI) += tmpv7708-rm-mbrc.dtb
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
new file mode 100644
index 0000000..ed0bf7f
--- /dev/null
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree File for TMPV7708 RM main board
+ *
+ * (C) Copyright 2020, Toshiba Corporation.
+ * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+ */
+
+/dts-v1/;
+
+#include "tmpv7708.dtsi"
+
+/ {
+ model = "Toshiba TMPV7708 RM main board";
+ compatible = "toshiba,tmpv7708-rm-mbrc", "toshiba,tmpv7708";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ /* 768MB memory */
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x30000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+ clocks = <&uart_clk>;
+ clock-names = "apb_pclk";
+};
+
+&uart1 {
+ status = "okay";
+ clocks = <&uart_clk>;
+ clock-names = "apb_pclk";
+};
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
new file mode 100644
index 0000000..242f25f
--- /dev/null
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for the TMPV7708
+ *
+ * (C) Copyright 2018 - 2020, Toshiba Corporation.
+ * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x81000000 0x00300000; /* cpu-release-addr */
+
+/ {
+ compatible = "toshiba,tmpv7708";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x81100000>;
+ reg = <0x00>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x81100000>;
+ reg = <0x01>;
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x81100000>;
+ reg = <0x02>;
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x81100000>;
+ reg = <0x03>;
+ };
+
+ cpu4: cpu@100 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x81100000>;
+ reg = <0x100>;
+ };
+
+ cpu5: cpu@101 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x81100000>;
+ reg = <0x101>;
+ };
+
+ cpu6: cpu@102 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x81100000>;
+ reg = <0x102>;
+ };
+
+ cpu7: cpu@103 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x81100000>;
+ reg = <0x103>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts =
+ <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ uart_clk: uart-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <150000000>;
+ #clock-cells = <0>;
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ gic: interrupt-controller@24001000 {
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ reg = <0 0x24001000 0 0x1000>,
+ <0 0x24002000 0 0x2000>,
+ <0 0x24004000 0 0x2000>,
+ <0 0x24006000 0 0x2000>;
+ };
+
+ pmux: pmux@24190000 {
+ compatible = "toshiba,tmpv7708-pinctrl";
+ reg = <0 0x24190000 0 0x10000>;
+ };
+
+ uart0: serial@28200000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0 0x28200000 0 0x1000>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "disabled";
+ };
+
+ uart1: serial@28201000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0 0x28201000 0 0x1000>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "disabled";
+ };
+
+ uart2: serial@28202000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0 0x28202000 0 0x1000>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "disabled";
+ };
+
+ uart3: serial@28203000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0 0x28203000 0 0x1000>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@28030000 {
+ compatible = "snps,designware-i2c";
+ reg = <0 0x28030000 0 0x1000>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@28031000 {
+ compatible = "snps,designware-i2c";
+ reg = <0 0x28031000 0 0x1000>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@28032000 {
+ compatible = "snps,designware-i2c";
+ reg = <0 0x28032000 0 0x1000>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@28033000 {
+ compatible = "snps,designware-i2c";
+ reg = <0 0x28033000 0 0x1000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@28034000 {
+ compatible = "snps,designware-i2c";
+ reg = <0 0x28034000 0 0x1000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@28035000 {
+ compatible = "snps,designware-i2c";
+ reg = <0 0x28035000 0 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@28036000 {
+ compatible = "snps,designware-i2c";
+ reg = <0 0x28036000 0 0x1000>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_pins>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@28037000 {
+ compatible = "snps,designware-i2c";
+ reg = <0 0x28037000 0 0x1000>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7_pins>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@28038000 {
+ compatible = "snps,designware-i2c";
+ reg = <0 0x28038000 0 0x1000>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c8_pins>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi0: spi@28140000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0 0x28140000 0 0x1000>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@28141000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0 0x28141000 0 0x1000>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@28142000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0 0x28142000 0 0x1000>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi3: spi@28143000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0 0x28143000 0 0x1000>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_pins>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi4: spi@28144000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0 0x28144000 0 0x1000>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi4_pins>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi5: spi@28145000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0 0x28145000 0 0x1000>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi5_pins>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi6: spi@28146000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0 0x28146000 0 0x1000>;
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi6_pins>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+};
+
+#include "tmpv7708_pins.dtsi"
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi
new file mode 100644
index 0000000..34de000
--- /dev/null
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&pmux {
+ spi0_pins: spi0-pins {
+ function = "spi0";
+ groups = "spi0_grp";
+ };
+ spi1_pins: spi1-pins {
+ function = "spi1";
+ groups = "spi1_grp";
+ };
+ spi2_pins: spi2-pins {
+ function = "spi2";
+ groups = "spi2_grp";
+ };
+ spi3_pins: spi3-pins {
+ function = "spi3";
+ groups = "spi3_grp";
+ };
+ spi4_pins: spi4-pins {
+ function = "spi4";
+ groups = "spi4_grp";
+ };
+ spi5_pins: spi5-pins {
+ function = "spi5";
+ groups = "spi5_grp";
+ };
+ spi6_pins: spi6-pins {
+ function = "spi6";
+ groups = "spi6_grp";
+ };
+ uart0_pins: uart0-pins {
+ function = "uart0";
+ groups = "uart0_grp";
+ };
+ uart1_pins: uart1-pins {
+ function = "uart1";
+ groups = "uart1_grp";
+ };
+ uart2_pins: uart2-pins {
+ function = "uart2";
+ groups = "uart2_grp";
+ };
+ uart3_pins: uart3-pins {
+ function = "uart3";
+ groups = "uart3_grp";
+ };
+ i2c0_pins: i2c0-pins {
+ function = "i2c0";
+ groups = "i2c0_grp";
+ bias-pull-up;
+ };
+ i2c1_pins: i2c1-pins {
+ function = "i2c1";
+ groups = "i2c1_grp";
+ bias-pull-up;
+ };
+ i2c2_pins: i2c2-pins {
+ function = "i2c2";
+ groups = "i2c2_grp";
+ bias-pull-up;
+ };
+ i2c3_pins: i2c3-pins {
+ function = "i2c3";
+ groups = "i2c3_grp";
+ bias-pull-up;
+ };
+ i2c4_pins: i2c4-pins {
+ function = "i2c4";
+ groups = "i2c4_grp";
+ bias-pull-up;
+ };
+ i2c5_pins: i2c5-pins {
+ function = "i2c5";
+ groups = "i2c5_grp";
+ bias-pull-up;
+ };
+ i2c6_pins: i2c6-pins {
+ function = "i2c6";
+ groups = "i2c6_grp";
+ bias-pull-up;
+ };
+ i2c7_pins: i2c7-pins {
+ function = "i2c7";
+ groups = "i2c7_grp";
+ bias-pull-up;
+ };
+ i2c8_pins: i2c8-pins {
+ function = "i2c8";
+ groups = "i2c8_grp";
+ bias-pull-up;
+ };
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
index 9868ca1..c94c3bb 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
@@ -10,35 +10,30 @@
#include <dt-bindings/clock/xlnx-zynqmp-clk.h>
/ {
pss_ref_clk: pss_ref_clk {
- u-boot,dm-pre-reloc;
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <33333333>;
};
video_clk: video_clk {
- u-boot,dm-pre-reloc;
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
};
pss_alt_ref_clk: pss_alt_ref_clk {
- u-boot,dm-pre-reloc;
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
gt_crx_ref_clk: gt_crx_ref_clk {
- u-boot,dm-pre-reloc;
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <108000000>;
};
aux_ref_clk: aux_ref_clk {
- u-boot,dm-pre-reloc;
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index d60110a..68ecd0f 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -56,27 +56,27 @@ sw4 {
leds {
compatible = "gpio-leds";
- ds2 {
+ led-ds2 {
label = "ds2";
gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- ds3 {
+ led-ds3 {
label = "ds3";
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tx"; /* WLAN tx */
default-state = "off";
};
- ds4 {
+ led-ds4 {
label = "ds4";
gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0rx"; /* WLAN rx */
default-state = "off";
};
- ds5 {
+ led-ds5 {
label = "ds5";
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "bluetooth-power";
@@ -186,7 +186,7 @@ pmic: pmic@5e { /* Custom TI PMIC u33 */
compatible = "ti,tps65086";
reg = <0x5e>;
interrupt-parent = <&gpio>;
- interrupts = <77 GPIO_ACTIVE_LOW>;
+ interrupts = <77 IRQ_TYPE_LEVEL_LOW>;
#gpio-cells = <2>;
gpio-controller;
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 4f80172..f1255f6 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -203,25 +203,25 @@ tca6416_u97: gpio@20 {
gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3",
"PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B",
"", "", "", "", "", "", "", "", "";
- gtr-sel0 {
+ gtr-sel0-hog {
gpio-hog;
gpios = <0 0>;
output-low; /* PCIE = 0, DP = 1 */
line-name = "sel0";
};
- gtr-sel1 {
+ gtr-sel1-hog {
gpio-hog;
gpios = <1 0>;
output-high; /* PCIE = 0, DP = 1 */
line-name = "sel1";
};
- gtr-sel2 {
+ gtr-sel2-hog {
gpio-hog;
gpios = <2 0>;
output-high; /* PCIE = 0, USB0 = 1 */
line-name = "sel2";
};
- gtr-sel3 {
+ gtr-sel3-hog {
gpio-hog;
gpios = <3 0>;
output-high; /* PCIE = 0, SATA = 1 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 3ec99f1..771f60e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -131,7 +131,6 @@ zynqmp_power: zynqmp-power {
};
zynqmp_clk: clock-controller {
- u-boot,dm-pre-reloc;
#clock-cells = <1>;
compatible = "xlnx,zynqmp-clk";
clocks = <&pss_ref_clk>,
@@ -183,7 +182,7 @@ fpga_full: fpga-full {
ranges;
};
- amba_apu: amba-apu@0 {
+ amba_apu: axi@0 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
@@ -202,7 +201,7 @@ gic: interrupt-controller@f9010000 {
};
};
- amba: amba {
+ amba: axi {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
@@ -501,7 +500,7 @@ gpio: gpio@ff0a0000 {
};
i2c0: i2c@ff020000 {
- compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
+ compatible = "cdns,i2c-r1p14";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 17 4>;
@@ -512,7 +511,7 @@ i2c0: i2c@ff020000 {
};
i2c1: i2c@ff030000 {
- compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
+ compatible = "cdns,i2c-r1p14";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 18 4>;
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 6d04b95..17a2df6 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -57,6 +57,7 @@
CONFIG_ARCH_THUNDER2=y
CONFIG_ARCH_UNIPHIER=y
CONFIG_ARCH_VEXPRESS=y
+CONFIG_ARCH_VISCONTI=y
CONFIG_ARCH_XGENE=y
CONFIG_ARCH_ZX=y
CONFIG_ARCH_ZYNQMP=y
@@ -199,6 +200,9 @@
CONFIG_RFKILL=m
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+CONFIG_NFC_S3FWRN5_I2C=m
CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCI_IOV=y
@@ -208,6 +212,7 @@
CONFIG_PCI_AARDVARK=y
CONFIG_PCI_TEGRA=y
CONFIG_PCIE_RCAR_HOST=y
+CONFIG_PCIE_RCAR_EP=y
CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCI_XGENE=y
CONFIG_PCIE_ALTERA=y
@@ -224,6 +229,9 @@
CONFIG_PCIE_KIRIN=y
CONFIG_PCIE_HISI_STB=y
CONFIG_PCIE_TEGRA194_HOST=m
+CONFIG_PCI_ENDPOINT=y
+CONFIG_PCI_ENDPOINT_CONFIGFS=y
+CONFIG_PCI_EPF_TEST=m
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_FW_LOADER_USER_HELPER=y
@@ -231,6 +239,7 @@
CONFIG_HISILICON_LPC=y
CONFIG_SIMPLE_PM_BUS=y
CONFIG_FSL_MC_BUS=y
+CONFIG_TEGRA_ACONNECT=m
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
@@ -254,6 +263,7 @@
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_NVME=m
CONFIG_SRAM=y
+CONFIG_PCI_ENDPOINT_TEST=m
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
CONFIG_UACCE=m
@@ -453,6 +463,7 @@
CONFIG_SPI_ORION=y
CONFIG_SPI_PL022=y
CONFIG_SPI_ROCKCHIP=y
+CONFIG_SPI_RPCIF=m
CONFIG_SPI_QCOM_QSPI=m
CONFIG_SPI_QUP=y
CONFIG_SPI_QCOM_GENI=m
@@ -500,6 +511,7 @@
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_BD9571MWV=m
CONFIG_GPIO_MAX77620=y
+CONFIG_GPIO_SL28CPLD=m
CONFIG_POWER_AVS=y
CONFIG_QCOM_CPR=y
CONFIG_ROCKCHIP_IODOMAIN=y
@@ -513,6 +525,7 @@
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_PWM_FAN=m
CONFIG_SENSORS_RASPBERRYPI_HWMON=m
+CONFIG_SENSORS_SL28CPLD=m
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_INA3221=m
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
@@ -535,6 +548,7 @@
CONFIG_QCOM_SPMI_TEMP_ALARM=m
CONFIG_UNIPHIER_THERMAL=y
CONFIG_WATCHDOG=y
+CONFIG_SL28CPLD_WATCHDOG=m
CONFIG_ARM_SP805_WATCHDOG=y
CONFIG_ARM_SBSA_WATCHDOG=y
CONFIG_ARM_SMC_WATCHDOG=y
@@ -560,6 +574,7 @@
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_RK808=y
CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_SL28CPLD=y
CONFIG_MFD_ROHM_BD718XX=y
CONFIG_MFD_WCD934X=m
CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -640,10 +655,14 @@
CONFIG_DRM_TEGRA=m
CONFIG_DRM_PANEL_LVDS=m
CONFIG_DRM_PANEL_SIMPLE=m
-CONFIG_DRM_SIMPLE_BRIDGE=m
+CONFIG_DRM_PANEL_RAYDIUM_RM67191=m
+CONFIG_DRM_PANEL_SITRONIX_ST7703=m
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
CONFIG_DRM_DISPLAY_CONNECTOR=m
+CONFIG_DRM_NWL_MIPI_DSI=m
+CONFIG_DRM_LONTIUM_LT9611=m
CONFIG_DRM_SII902X=m
+CONFIG_DRM_SIMPLE_BRIDGE=m
CONFIG_DRM_THINE_THC63LVD1024=m
CONFIG_DRM_TI_SN65DSI86=m
CONFIG_DRM_I2C_ADV7511=m
@@ -654,6 +673,7 @@
CONFIG_DRM_ETNAVIV=m
CONFIG_DRM_HISI_HIBMC=m
CONFIG_DRM_HISI_KIRIN=m
+CONFIG_DRM_MXSFB=m
CONFIG_DRM_MESON=m
CONFIG_DRM_PL111=m
CONFIG_DRM_LIMA=m
@@ -676,6 +696,9 @@
CONFIG_SND_SOC_FSL_SAI=m
CONFIG_SND_MESON_AXG_SOUND_CARD=m
CONFIG_SND_MESON_GX_SOUND_CARD=m
+CONFIG_SND_SOC_QCOM=m
+CONFIG_SND_SOC_APQ8016_SBC=m
+CONFIG_SND_SOC_MSM8996=m
CONFIG_SND_SOC_SDM845=m
CONFIG_SND_SOC_ROCKCHIP=m
CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
@@ -684,6 +707,12 @@
CONFIG_SND_SOC_SAMSUNG=y
CONFIG_SND_SOC_RCAR=m
CONFIG_SND_SUN4I_SPDIF=m
+CONFIG_SND_SOC_TEGRA=m
+CONFIG_SND_SOC_TEGRA210_AHUB=m
+CONFIG_SND_SOC_TEGRA210_DMIC=m
+CONFIG_SND_SOC_TEGRA210_I2S=m
+CONFIG_SND_SOC_TEGRA186_DSPK=m
+CONFIG_SND_SOC_TEGRA210_ADMAIF=m
CONFIG_SND_SOC_AK4613=m
CONFIG_SND_SOC_ES7134=m
CONFIG_SND_SOC_ES7241=m
@@ -709,6 +738,7 @@
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_RENESAS_USBHS_HCD=m
CONFIG_USB_RENESAS_USBHS=m
+CONFIG_USB_ACM=m
CONFIG_USB_STORAGE=y
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_SUNXI=y
@@ -718,6 +748,8 @@
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_ISP1760=y
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_HSIC_USB3503=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_USB_GADGET=y
@@ -811,6 +843,7 @@
CONFIG_OWL_DMA=y
CONFIG_PL330_DMA=y
CONFIG_TEGRA20_APB_DMA=y
+CONFIG_TEGRA210_ADMA=m
CONFIG_QCOM_BAM_DMA=y
CONFIG_QCOM_HIDMA_MGMT=y
CONFIG_QCOM_HIDMA=y
@@ -838,6 +871,7 @@
CONFIG_COMMON_CLK_S2MPS11=y
CONFIG_COMMON_CLK_PWM=y
CONFIG_COMMON_CLK_VC5=y
+CONFIG_COMMON_CLK_BD718XX=m
CONFIG_CLK_RASPBERRYPI=m
CONFIG_CLK_IMX8MM=y
CONFIG_CLK_IMX8MN=y
@@ -865,6 +899,8 @@
CONFIG_SDM_DISPCC_845=y
CONFIG_SM_GCC_8150=y
CONFIG_SM_GCC_8250=y
+CONFIG_SM_GPUCC_8150=y
+CONFIG_SM_GPUCC_8250=y
CONFIG_QCOM_HFPLL=y
CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_QCOM=y
@@ -928,6 +964,7 @@
CONFIG_EXTCON_PTN5150=m
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_CROS_EC=y
+CONFIG_RENESAS_RPCIF=m
CONFIG_IIO=y
CONFIG_EXYNOS_ADC=y
CONFIG_MAX9611=m
@@ -946,14 +983,18 @@
CONFIG_PWM_RCAR=m
CONFIG_PWM_ROCKCHIP=y
CONFIG_PWM_SAMSUNG=y
+CONFIG_PWM_SL28CPLD=m
CONFIG_PWM_SUN4I=m
CONFIG_PWM_TEGRA=m
+CONFIG_SL28CPLD_INTC=y
CONFIG_QCOM_PDC=y
+CONFIG_RESET_IMX7=y
CONFIG_RESET_QCOM_AOSS=y
CONFIG_RESET_QCOM_PDC=m
CONFIG_RESET_TI_SCI=y
CONFIG_PHY_XGENE=y
CONFIG_PHY_SUN4I_USB=y
+CONFIG_PHY_MIXEL_MIPI_DPHY=m
CONFIG_PHY_HI6220_USB=y
CONFIG_PHY_HISTB_COMBPHY=y
CONFIG_PHY_HISI_INNO_USB2=y
@@ -961,6 +1002,7 @@
CONFIG_PHY_QCOM_QMP=m
CONFIG_PHY_QCOM_QUSB2=m
CONFIG_PHY_QCOM_USB_HS=y
+CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y
CONFIG_PHY_RCAR_GEN3_PCIE=y
CONFIG_PHY_RCAR_GEN3_USB2=y
CONFIG_PHY_RCAR_GEN3_USB3=m
@@ -996,6 +1038,12 @@
CONFIG_SLIM_QCOM_CTRL=m
CONFIG_SLIM_QCOM_NGD_CTRL=m
CONFIG_MUX_MMIO=y
+CONFIG_INTERCONNECT=y
+CONFIG_INTERCONNECT_QCOM=y
+CONFIG_INTERCONNECT_QCOM_MSM8916=m
+CONFIG_INTERCONNECT_QCOM_SDM845=m
+CONFIG_INTERCONNECT_QCOM_SM8150=m
+CONFIG_INTERCONNECT_QCOM_SM8250=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
diff --git a/arch/mips/boot/dts/brcm/bcm63268.dtsi b/arch/mips/boot/dts/brcm/bcm63268.dtsi
index beec241..5acb49b6 100644
--- a/arch/mips/boot/dts/brcm/bcm63268.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm63268.dtsi
@@ -117,6 +117,12 @@ leds0: led-controller@10001900 {
status = "disabled";
};
+ periph_pwr: power-controller@1000184c {
+ compatible = "brcm,bcm6328-power-controller";
+ reg = <0x1000184c 0x4>;
+ #power-domain-cells = <1>;
+ };
+
ehci: usb@10002500 {
compatible = "brcm,bcm63268-ehci", "generic-ehci";
reg = <0x10002500 0x100>;
diff --git a/arch/mips/boot/dts/brcm/bcm6328.dtsi b/arch/mips/boot/dts/brcm/bcm6328.dtsi
index af860d0..1f9edd7 100644
--- a/arch/mips/boot/dts/brcm/bcm6328.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6328.dtsi
@@ -110,6 +110,12 @@ leds0: led-controller@10000800 {
status = "disabled";
};
+ periph_pwr: power-controller@10001848 {
+ compatible = "brcm,bcm6328-power-controller";
+ reg = <0x10001848 0x4>;
+ #power-domain-cells = <1>;
+ };
+
ehci: usb@10002500 {
compatible = "brcm,bcm6328-ehci", "generic-ehci";
reg = <0x10002500 0x100>;
diff --git a/arch/mips/boot/dts/brcm/bcm6362.dtsi b/arch/mips/boot/dts/brcm/bcm6362.dtsi
index 8ae6981..c98f911 100644
--- a/arch/mips/boot/dts/brcm/bcm6362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6362.dtsi
@@ -108,6 +108,12 @@ uart1: serial@10000120 {
status = "disabled";
};
+ periph_pwr: power-controller@10001848 {
+ compatible = "brcm,bcm6362-power-controller";
+ reg = <0x10001848 0x4>;
+ #power-domain-cells = <1>;
+ };
+
leds0: led-controller@10001900 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c
index 5d458a4..9549496 100644
--- a/arch/parisc/kernel/sys_parisc.c
+++ b/arch/parisc/kernel/sys_parisc.c
@@ -6,7 +6,7 @@
* Copyright (C) 1999-2003 Matthew Wilcox <willy at parisc-linux.org>
* Copyright (C) 2000-2003 Paul Bame <bame at parisc-linux.org>
* Copyright (C) 2001 Thomas Bogendoerfer <tsbogend at parisc-linux.org>
- * Copyright (C) 1999-2014 Helge Deller <deller@gmx.de>
+ * Copyright (C) 1999-2020 Helge Deller <deller@gmx.de>
*/
#include <linux/uaccess.h>
@@ -23,6 +23,7 @@
#include <linux/utsname.h>
#include <linux/personality.h>
#include <linux/random.h>
+#include <linux/compat.h>
/* we construct an artificial offset for the mapping based on the physical
* address of the kernel mapping variable */
@@ -373,3 +374,73 @@ long parisc_personality(unsigned long personality)
return err;
}
+
+/*
+ * Up to kernel v5.9 we defined O_NONBLOCK as 000200004,
+ * since then O_NONBLOCK is defined as 000200000.
+ *
+ * The following wrapper functions mask out the old
+ * O_NDELAY bit from calls which use O_NONBLOCK.
+ *
+ * XXX: Remove those in year 2022 (or later)?
+ */
+
+#define O_NONBLOCK_OLD 000200004
+#define O_NONBLOCK_MASK_OUT (O_NONBLOCK_OLD & ~O_NONBLOCK)
+
+static int FIX_O_NONBLOCK(int flags)
+{
+ if (flags & O_NONBLOCK_MASK_OUT) {
+ struct task_struct *tsk = current;
+ pr_warn_once("%s(%d) uses a deprecated O_NONBLOCK value.\n",
+ tsk->comm, tsk->pid);
+ }
+ return flags & ~O_NONBLOCK_MASK_OUT;
+}
+
+asmlinkage long parisc_timerfd_create(int clockid, int flags)
+{
+ flags = FIX_O_NONBLOCK(flags);
+ return sys_timerfd_create(clockid, flags);
+}
+
+asmlinkage long parisc_signalfd4(int ufd, sigset_t __user *user_mask,
+ size_t sizemask, int flags)
+{
+ flags = FIX_O_NONBLOCK(flags);
+ return sys_signalfd4(ufd, user_mask, sizemask, flags);
+}
+
+#ifdef CONFIG_COMPAT
+asmlinkage long parisc_compat_signalfd4(int ufd,
+ compat_sigset_t __user *user_mask,
+ compat_size_t sizemask, int flags)
+{
+ flags = FIX_O_NONBLOCK(flags);
+ return compat_sys_signalfd4(ufd, user_mask, sizemask, flags);
+}
+#endif
+
+asmlinkage long parisc_eventfd2(unsigned int count, int flags)
+{
+ flags = FIX_O_NONBLOCK(flags);
+ return sys_eventfd2(count, flags);
+}
+
+asmlinkage long parisc_userfaultfd(int flags)
+{
+ flags = FIX_O_NONBLOCK(flags);
+ return sys_userfaultfd(flags);
+}
+
+asmlinkage long parisc_pipe2(int __user *fildes, int flags)
+{
+ flags = FIX_O_NONBLOCK(flags);
+ return sys_pipe2(fildes, flags);
+}
+
+asmlinkage long parisc_inotify_init1(int flags)
+{
+ flags = FIX_O_NONBLOCK(flags);
+ return sys_inotify_init1(flags);
+}
diff --git a/arch/parisc/kernel/syscalls/syscall.tbl b/arch/parisc/kernel/syscalls/syscall.tbl
index 38c63e5..f375ea5 100644
--- a/arch/parisc/kernel/syscalls/syscall.tbl
+++ b/arch/parisc/kernel/syscalls/syscall.tbl
@@ -344,17 +344,17 @@
304 common eventfd sys_eventfd
305 32 fallocate parisc_fallocate
305 64 fallocate sys_fallocate
-306 common timerfd_create sys_timerfd_create
+306 common timerfd_create parisc_timerfd_create
307 32 timerfd_settime sys_timerfd_settime32
307 64 timerfd_settime sys_timerfd_settime
308 32 timerfd_gettime sys_timerfd_gettime32
308 64 timerfd_gettime sys_timerfd_gettime
-309 common signalfd4 sys_signalfd4 compat_sys_signalfd4
-310 common eventfd2 sys_eventfd2
+309 common signalfd4 parisc_signalfd4 parisc_compat_signalfd4
+310 common eventfd2 parisc_eventfd2
311 common epoll_create1 sys_epoll_create1
312 common dup3 sys_dup3
-313 common pipe2 sys_pipe2
-314 common inotify_init1 sys_inotify_init1
+313 common pipe2 parisc_pipe2
+314 common inotify_init1 parisc_inotify_init1
315 common preadv sys_preadv compat_sys_preadv
316 common pwritev sys_pwritev compat_sys_pwritev
317 common rt_tgsigqueueinfo sys_rt_tgsigqueueinfo compat_sys_rt_tgsigqueueinfo
@@ -387,7 +387,7 @@
341 common bpf sys_bpf
342 common execveat sys_execveat compat_sys_execveat
343 common membarrier sys_membarrier
-344 common userfaultfd sys_userfaultfd
+344 common userfaultfd parisc_userfaultfd
345 common mlock2 sys_mlock2
346 common copy_file_range sys_copy_file_range
347 common preadv2 sys_preadv2 compat_sys_preadv2
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index 0450815..13d94f0 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -180,9 +180,16 @@ static int rtc_generic_get_time(struct device *dev, struct rtc_time *tm)
static int rtc_generic_set_time(struct device *dev, struct rtc_time *tm)
{
time64_t secs = rtc_tm_to_time64(tm);
+ int ret;
- if (pdc_tod_set(secs, 0) < 0)
+ /* hppa has Y2K38 problem: pdc_tod_set() takes an u32 value! */
+ ret = pdc_tod_set(secs, 0);
+ if (ret != 0) {
+ pr_warn("pdc_tod_set(%lld) returned error %d\n", secs, ret);
+ if (ret == PDC_INVALID_ARG)
+ return -EINVAL;
return -EOPNOTSUPP;
+ }
return 0;
}
diff --git a/arch/powerpc/include/asm/asm-const.h b/arch/powerpc/include/asm/asm-const.h
index 082c153..0ce2368 100644
--- a/arch/powerpc/include/asm/asm-const.h
+++ b/arch/powerpc/include/asm/asm-const.h
@@ -11,4 +11,17 @@
# define __ASM_CONST(x) x##UL
# define ASM_CONST(x) __ASM_CONST(x)
#endif
+
+/*
+ * Inline assembly memory constraint
+ *
+ * GCC 4.9 doesn't properly handle pre update memory constraint "m<>"
+ *
+ */
+#if defined(GCC_VERSION) && GCC_VERSION < 50000
+#define UPD_CONSTR ""
+#else
+#define UPD_CONSTR "<>"
+#endif
+
#endif /* _ASM_POWERPC_ASM_CONST_H */
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 93bc70d..3d2f94a 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -477,7 +477,7 @@ static inline void cpu_feature_keys_init(void) { }
CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \
CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_ARCH_207S | \
- CPU_FTR_TM_COMP | CPU_FTR_ARCH_300 | CPU_FTR_ARCH_31 | \
+ CPU_FTR_ARCH_300 | CPU_FTR_ARCH_31 | \
CPU_FTR_DAWR | CPU_FTR_DAWR1)
#define CPU_FTRS_CELL (CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index 916daa4..ef5bbb7 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -182,7 +182,7 @@ do { \
"1: " op "%U1%X1 %0,%1 # put_user\n" \
EX_TABLE(1b, %l2) \
: \
- : "r" (x), "m<>" (*addr) \
+ : "r" (x), "m"UPD_CONSTR (*addr) \
: \
: label)
@@ -253,7 +253,7 @@ extern long __get_user_bad(void);
".previous\n" \
EX_TABLE(1b, 3b) \
: "=r" (err), "=r" (x) \
- : "m<>" (*addr), "i" (-EFAULT), "0" (err))
+ : "m"UPD_CONSTR (*addr), "i" (-EFAULT), "0" (err))
#ifdef __powerpc64__
#define __get_user_asm2(x, addr, err) \
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 492c0b3..29de58d 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -121,9 +121,16 @@ extern void __restore_cpu_e6500(void);
PPC_FEATURE2_DARN | \
PPC_FEATURE2_SCV)
#define COMMON_USER_POWER10 COMMON_USER_POWER9
-#define COMMON_USER2_POWER10 (COMMON_USER2_POWER9 | \
- PPC_FEATURE2_ARCH_3_1 | \
- PPC_FEATURE2_MMA)
+#define COMMON_USER2_POWER10 (PPC_FEATURE2_ARCH_3_1 | \
+ PPC_FEATURE2_MMA | \
+ PPC_FEATURE2_ARCH_3_00 | \
+ PPC_FEATURE2_HAS_IEEE128 | \
+ PPC_FEATURE2_DARN | \
+ PPC_FEATURE2_SCV | \
+ PPC_FEATURE2_ARCH_2_07 | \
+ PPC_FEATURE2_DSCR | \
+ PPC_FEATURE2_ISEL | PPC_FEATURE2_TAR | \
+ PPC_FEATURE2_VEC_CRYPTO)
#ifdef CONFIG_PPC_BOOK3E_64
#define COMMON_USER_BOOKE (COMMON_USER_PPC64 | PPC_FEATURE_BOOKE)
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 0e160df..813713c 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -466,11 +466,6 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
return 0;
}
- if (!pe->addr) {
- eeh_stats.no_cfg_addr++;
- return 0;
- }
-
/*
* On PowerNV platform, we might already have fenced PHB
* there and we need take care of that firstly.
diff --git a/arch/powerpc/kernel/mce.c b/arch/powerpc/kernel/mce.c
index ada59f6..63702c0 100644
--- a/arch/powerpc/kernel/mce.c
+++ b/arch/powerpc/kernel/mce.c
@@ -591,12 +591,11 @@ EXPORT_SYMBOL_GPL(machine_check_print_event_info);
long notrace machine_check_early(struct pt_regs *regs)
{
long handled = 0;
- bool nested = in_nmi();
u8 ftrace_enabled = this_cpu_get_ftrace_enabled();
this_cpu_set_ftrace_enabled(0);
-
- if (!nested)
+ /* Do not use nmi_enter/exit for pseries hpte guest */
+ if (radix_enabled() || !firmware_has_feature(FW_FEATURE_LPAR))
nmi_enter();
hv_nmi_check_nonrecoverable(regs);
@@ -607,7 +606,7 @@ long notrace machine_check_early(struct pt_regs *regs)
if (ppc_md.machine_check_early)
handled = ppc_md.machine_check_early(regs);
- if (!nested)
+ if (radix_enabled() || !firmware_has_feature(FW_FEATURE_LPAR))
nmi_exit();
this_cpu_set_ftrace_enabled(ftrace_enabled);
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 0dc1b85..3c6b982 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1240,43 +1240,33 @@ static struct device_node *cpu_to_l2cache(int cpu)
return cache;
}
-static bool update_mask_by_l2(int cpu)
+static bool update_mask_by_l2(int cpu, cpumask_var_t *mask)
{
struct cpumask *(*submask_fn)(int) = cpu_sibling_mask;
struct device_node *l2_cache, *np;
- cpumask_var_t mask;
int i;
+ if (has_big_cores)
+ submask_fn = cpu_smallcore_mask;
+
l2_cache = cpu_to_l2cache(cpu);
- if (!l2_cache) {
- struct cpumask *(*sibling_mask)(int) = cpu_sibling_mask;
-
- /*
- * If no l2cache for this CPU, assume all siblings to share
- * cache with this CPU.
- */
- if (has_big_cores)
- sibling_mask = cpu_smallcore_mask;
-
- for_each_cpu(i, sibling_mask(cpu))
+ if (!l2_cache || !*mask) {
+ /* Assume only core siblings share cache with this CPU */
+ for_each_cpu(i, submask_fn(cpu))
set_cpus_related(cpu, i, cpu_l2_cache_mask);
return false;
}
- alloc_cpumask_var_node(&mask, GFP_KERNEL, cpu_to_node(cpu));
- cpumask_and(mask, cpu_online_mask, cpu_cpu_mask(cpu));
-
- if (has_big_cores)
- submask_fn = cpu_smallcore_mask;
+ cpumask_and(*mask, cpu_online_mask, cpu_cpu_mask(cpu));
/* Update l2-cache mask with all the CPUs that are part of submask */
or_cpumasks_related(cpu, cpu, submask_fn, cpu_l2_cache_mask);
/* Skip all CPUs already part of current CPU l2-cache mask */
- cpumask_andnot(mask, mask, cpu_l2_cache_mask(cpu));
+ cpumask_andnot(*mask, *mask, cpu_l2_cache_mask(cpu));
- for_each_cpu(i, mask) {
+ for_each_cpu(i, *mask) {
/*
* when updating the marks the current CPU has not been marked
* online, but we need to update the cache masks
@@ -1286,15 +1276,14 @@ static bool update_mask_by_l2(int cpu)
/* Skip all CPUs already part of current CPU l2-cache */
if (np == l2_cache) {
or_cpumasks_related(cpu, i, submask_fn, cpu_l2_cache_mask);
- cpumask_andnot(mask, mask, submask_fn(i));
+ cpumask_andnot(*mask, *mask, submask_fn(i));
} else {
- cpumask_andnot(mask, mask, cpu_l2_cache_mask(i));
+ cpumask_andnot(*mask, *mask, cpu_l2_cache_mask(i));
}
of_node_put(np);
}
of_node_put(l2_cache);
- free_cpumask_var(mask);
return true;
}
@@ -1337,40 +1326,46 @@ static inline void add_cpu_to_smallcore_masks(int cpu)
}
}
-static void update_coregroup_mask(int cpu)
+static void update_coregroup_mask(int cpu, cpumask_var_t *mask)
{
struct cpumask *(*submask_fn)(int) = cpu_sibling_mask;
- cpumask_var_t mask;
int coregroup_id = cpu_to_coregroup_id(cpu);
int i;
- alloc_cpumask_var_node(&mask, GFP_KERNEL, cpu_to_node(cpu));
- cpumask_and(mask, cpu_online_mask, cpu_cpu_mask(cpu));
-
if (shared_caches)
submask_fn = cpu_l2_cache_mask;
+ if (!*mask) {
+ /* Assume only siblings are part of this CPU's coregroup */
+ for_each_cpu(i, submask_fn(cpu))
+ set_cpus_related(cpu, i, cpu_coregroup_mask);
+
+ return;
+ }
+
+ cpumask_and(*mask, cpu_online_mask, cpu_cpu_mask(cpu));
+
/* Update coregroup mask with all the CPUs that are part of submask */
or_cpumasks_related(cpu, cpu, submask_fn, cpu_coregroup_mask);
/* Skip all CPUs already part of coregroup mask */
- cpumask_andnot(mask, mask, cpu_coregroup_mask(cpu));
+ cpumask_andnot(*mask, *mask, cpu_coregroup_mask(cpu));
- for_each_cpu(i, mask) {
+ for_each_cpu(i, *mask) {
/* Skip all CPUs not part of this coregroup */
if (coregroup_id == cpu_to_coregroup_id(i)) {
or_cpumasks_related(cpu, i, submask_fn, cpu_coregroup_mask);
- cpumask_andnot(mask, mask, submask_fn(i));
+ cpumask_andnot(*mask, *mask, submask_fn(i));
} else {
- cpumask_andnot(mask, mask, cpu_coregroup_mask(i));
+ cpumask_andnot(*mask, *mask, cpu_coregroup_mask(i));
}
}
- free_cpumask_var(mask);
}
static void add_cpu_to_masks(int cpu)
{
int first_thread = cpu_first_thread_sibling(cpu);
+ cpumask_var_t mask;
int i;
/*
@@ -1384,10 +1379,15 @@ static void add_cpu_to_masks(int cpu)
set_cpus_related(i, cpu, cpu_sibling_mask);
add_cpu_to_smallcore_masks(cpu);
- update_mask_by_l2(cpu);
+
+ /* In CPU-hotplug path, hence use GFP_ATOMIC */
+ alloc_cpumask_var_node(&mask, GFP_ATOMIC, cpu_to_node(cpu));
+ update_mask_by_l2(cpu, &mask);
if (has_coregroup_support())
- update_coregroup_mask(cpu);
+ update_coregroup_mask(cpu, &mask);
+
+ free_cpumask_var(mask);
}
/* Activate a secondary processor. */
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index c5f39f1..5006dcb 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -885,7 +885,7 @@ static void p9_hmi_special_emu(struct pt_regs *regs)
{
unsigned int ra, rb, t, i, sel, instr, rc;
const void __user *addr;
- u8 vbuf[16], *vdst;
+ u8 vbuf[16] __aligned(16), *vdst;
unsigned long ea, msr, msr_mask;
bool swap;
diff --git a/arch/powerpc/platforms/powernv/opal-dump.c b/arch/powerpc/platforms/powernv/opal-dump.c
index 543c816..00c5a59 100644
--- a/arch/powerpc/platforms/powernv/opal-dump.c
+++ b/arch/powerpc/platforms/powernv/opal-dump.c
@@ -88,9 +88,14 @@ static ssize_t dump_ack_store(struct dump_obj *dump_obj,
const char *buf,
size_t count)
{
- dump_send_ack(dump_obj->id);
- sysfs_remove_file_self(&dump_obj->kobj, &attr->attr);
- kobject_put(&dump_obj->kobj);
+ /*
+ * Try to self remove this attribute. If we are successful,
+ * delete the kobject itself.
+ */
+ if (sysfs_remove_file_self(&dump_obj->kobj, &attr->attr)) {
+ dump_send_ack(dump_obj->id);
+ kobject_put(&dump_obj->kobj);
+ }
return count;
}
@@ -318,15 +323,14 @@ static ssize_t dump_attr_read(struct file *filep, struct kobject *kobj,
return count;
}
-static struct dump_obj *create_dump_obj(uint32_t id, size_t size,
- uint32_t type)
+static void create_dump_obj(uint32_t id, size_t size, uint32_t type)
{
struct dump_obj *dump;
int rc;
dump = kzalloc(sizeof(*dump), GFP_KERNEL);
if (!dump)
- return NULL;
+ return;
dump->kobj.kset = dump_kset;
@@ -346,21 +350,39 @@ static struct dump_obj *create_dump_obj(uint32_t id, size_t size,
rc = kobject_add(&dump->kobj, NULL, "0x%x-0x%x", type, id);
if (rc) {
kobject_put(&dump->kobj);
- return NULL;
+ return;
}
+ /*
+ * As soon as the sysfs file for this dump is created/activated there is
+ * a chance the opal_errd daemon (or any userspace) might read and
+ * acknowledge the dump before kobject_uevent() is called. If that
+ * happens then there is a potential race between
+ * dump_ack_store->kobject_put() and kobject_uevent() which leads to a
+ * use-after-free of a kernfs object resulting in a kernel crash.
+ *
+ * To avoid that, we need to take a reference on behalf of the bin file,
+ * so that our reference remains valid while we call kobject_uevent().
+ * We then drop our reference before exiting the function, leaving the
+ * bin file to drop the last reference (if it hasn't already).
+ */
+
+ /* Take a reference for the bin file */
+ kobject_get(&dump->kobj);
rc = sysfs_create_bin_file(&dump->kobj, &dump->dump_attr);
- if (rc) {
+ if (rc == 0) {
+ kobject_uevent(&dump->kobj, KOBJ_ADD);
+
+ pr_info("%s: New platform dump. ID = 0x%x Size %u\n",
+ __func__, dump->id, dump->size);
+ } else {
+ /* Drop reference count taken for bin file */
kobject_put(&dump->kobj);
- return NULL;
}
- pr_info("%s: New platform dump. ID = 0x%x Size %u\n",
- __func__, dump->id, dump->size);
-
- kobject_uevent(&dump->kobj, KOBJ_ADD);
-
- return dump;
+ /* Drop our reference */
+ kobject_put(&dump->kobj);
+ return;
}
static irqreturn_t process_dump(int irq, void *data)
diff --git a/arch/powerpc/platforms/powernv/opal-elog.c b/arch/powerpc/platforms/powernv/opal-elog.c
index 5e33b1f..37b380e 100644
--- a/arch/powerpc/platforms/powernv/opal-elog.c
+++ b/arch/powerpc/platforms/powernv/opal-elog.c
@@ -72,9 +72,14 @@ static ssize_t elog_ack_store(struct elog_obj *elog_obj,
const char *buf,
size_t count)
{
- opal_send_ack_elog(elog_obj->id);
- sysfs_remove_file_self(&elog_obj->kobj, &attr->attr);
- kobject_put(&elog_obj->kobj);
+ /*
+ * Try to self remove this attribute. If we are successful,
+ * delete the kobject itself.
+ */
+ if (sysfs_remove_file_self(&elog_obj->kobj, &attr->attr)) {
+ opal_send_ack_elog(elog_obj->id);
+ kobject_put(&elog_obj->kobj);
+ }
return count;
}
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 13c86a2..b2b245b 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -521,18 +521,55 @@ int pSeries_system_reset_exception(struct pt_regs *regs)
return 0; /* need to perform reset */
}
+static int mce_handle_err_realmode(int disposition, u8 error_type)
+{
+#ifdef CONFIG_PPC_BOOK3S_64
+ if (disposition == RTAS_DISP_NOT_RECOVERED) {
+ switch (error_type) {
+ case MC_ERROR_TYPE_SLB:
+ case MC_ERROR_TYPE_ERAT:
+ /*
+ * Store the old slb content in paca before flushing.
+ * Print this when we go to virtual mode.
+ * There are chances that we may hit MCE again if there
+ * is a parity error on the SLB entry we trying to read
+ * for saving. Hence limit the slb saving to single
+ * level of recursion.
+ */
+ if (local_paca->in_mce == 1)
+ slb_save_contents(local_paca->mce_faulty_slbs);
+ flush_and_reload_slb();
+ disposition = RTAS_DISP_FULLY_RECOVERED;
+ break;
+ default:
+ break;
+ }
+ } else if (disposition == RTAS_DISP_LIMITED_RECOVERY) {
+ /* Platform corrected itself but could be degraded */
+ pr_err("MCE: limited recovery, system may be degraded\n");
+ disposition = RTAS_DISP_FULLY_RECOVERED;
+ }
+#endif
+ return disposition;
+}
-static int mce_handle_error(struct pt_regs *regs, struct rtas_error_log *errp)
+static int mce_handle_err_virtmode(struct pt_regs *regs,
+ struct rtas_error_log *errp,
+ struct pseries_mc_errorlog *mce_log,
+ int disposition)
{
struct mce_error_info mce_err = { 0 };
- unsigned long eaddr = 0, paddr = 0;
- struct pseries_errorlog *pseries_log;
- struct pseries_mc_errorlog *mce_log;
- int disposition = rtas_error_disposition(errp);
int initiator = rtas_error_initiator(errp);
int severity = rtas_error_severity(errp);
+ unsigned long eaddr = 0, paddr = 0;
u8 error_type, err_sub_type;
+ if (!mce_log)
+ goto out;
+
+ error_type = mce_log->error_type;
+ err_sub_type = rtas_mc_error_sub_type(mce_log);
+
if (initiator == RTAS_INITIATOR_UNKNOWN)
mce_err.initiator = MCE_INITIATOR_UNKNOWN;
else if (initiator == RTAS_INITIATOR_CPU)
@@ -571,18 +608,7 @@ static int mce_handle_error(struct pt_regs *regs, struct rtas_error_log *errp)
mce_err.error_type = MCE_ERROR_TYPE_UNKNOWN;
mce_err.error_class = MCE_ECLASS_UNKNOWN;
- if (!rtas_error_extended(errp))
- goto out;
-
- pseries_log = get_pseries_errorlog(errp, PSERIES_ELOG_SECT_ID_MCE);
- if (pseries_log == NULL)
- goto out;
-
- mce_log = (struct pseries_mc_errorlog *)pseries_log->data;
- error_type = mce_log->error_type;
- err_sub_type = rtas_mc_error_sub_type(mce_log);
-
- switch (mce_log->error_type) {
+ switch (error_type) {
case MC_ERROR_TYPE_UE:
mce_err.error_type = MCE_ERROR_TYPE_UE;
mce_common_process_ue(regs, &mce_err);
@@ -682,37 +708,31 @@ static int mce_handle_error(struct pt_regs *regs, struct rtas_error_log *errp)
mce_err.error_type = MCE_ERROR_TYPE_UNKNOWN;
break;
}
-
-#ifdef CONFIG_PPC_BOOK3S_64
- if (disposition == RTAS_DISP_NOT_RECOVERED) {
- switch (error_type) {
- case MC_ERROR_TYPE_SLB:
- case MC_ERROR_TYPE_ERAT:
- /*
- * Store the old slb content in paca before flushing.
- * Print this when we go to virtual mode.
- * There are chances that we may hit MCE again if there
- * is a parity error on the SLB entry we trying to read
- * for saving. Hence limit the slb saving to single
- * level of recursion.
- */
- if (local_paca->in_mce == 1)
- slb_save_contents(local_paca->mce_faulty_slbs);
- flush_and_reload_slb();
- disposition = RTAS_DISP_FULLY_RECOVERED;
- break;
- default:
- break;
- }
- } else if (disposition == RTAS_DISP_LIMITED_RECOVERY) {
- /* Platform corrected itself but could be degraded */
- printk(KERN_ERR "MCE: limited recovery, system may "
- "be degraded\n");
- disposition = RTAS_DISP_FULLY_RECOVERED;
- }
-#endif
-
out:
+ save_mce_event(regs, disposition == RTAS_DISP_FULLY_RECOVERED,
+ &mce_err, regs->nip, eaddr, paddr);
+ return disposition;
+}
+
+static int mce_handle_error(struct pt_regs *regs, struct rtas_error_log *errp)
+{
+ struct pseries_errorlog *pseries_log;
+ struct pseries_mc_errorlog *mce_log = NULL;
+ int disposition = rtas_error_disposition(errp);
+ u8 error_type;
+
+ if (!rtas_error_extended(errp))
+ goto out;
+
+ pseries_log = get_pseries_errorlog(errp, PSERIES_ELOG_SECT_ID_MCE);
+ if (!pseries_log)
+ goto out;
+
+ mce_log = (struct pseries_mc_errorlog *)pseries_log->data;
+ error_type = mce_log->error_type;
+
+ disposition = mce_handle_err_realmode(disposition, error_type);
+
/*
* Enable translation as we will be accessing per-cpu variables
* in save_mce_event() which may fall outside RMO region, also
@@ -723,10 +743,10 @@ static int mce_handle_error(struct pt_regs *regs, struct rtas_error_log *errp)
* Note: All the realmode handling like flushing SLB entries for
* SLB multihit is done by now.
*/
+out:
mtmsr(mfmsr() | MSR_IR | MSR_DR);
- save_mce_event(regs, disposition == RTAS_DISP_FULLY_RECOVERED,
- &mce_err, regs->nip, eaddr, paddr);
-
+ disposition = mce_handle_err_virtmode(regs, errp, mce_log,
+ disposition);
return disposition;
}
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index d5e7ca0..44377fd 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -88,7 +88,7 @@
select SPARSE_IRQ
select SYSCTL_EXCEPTION_TRACE
select THREAD_INFO_IN_TASK
- select SET_FS
+ select UACCESS_MEMCPY if !MMU
config ARCH_MMAP_RND_BITS_MIN
default 18 if 64BIT
diff --git a/arch/riscv/include/asm/thread_info.h b/arch/riscv/include/asm/thread_info.h
index 464a2bb..a390711 100644
--- a/arch/riscv/include/asm/thread_info.h
+++ b/arch/riscv/include/asm/thread_info.h
@@ -24,10 +24,6 @@
#include <asm/processor.h>
#include <asm/csr.h>
-typedef struct {
- unsigned long seg;
-} mm_segment_t;
-
/*
* low level task data that entry.S needs immediate access to
* - this struct should fit entirely inside of one cache line
@@ -39,7 +35,6 @@ typedef struct {
struct thread_info {
unsigned long flags; /* low level flags */
int preempt_count; /* 0=>preemptible, <0=>BUG */
- mm_segment_t addr_limit;
/*
* These stack pointers are overwritten on every system call or
* exception. SP is also saved to the stack it can be recovered when
@@ -59,7 +54,6 @@ struct thread_info {
{ \
.flags = 0, \
.preempt_count = INIT_PREEMPT_COUNT, \
- .addr_limit = KERNEL_DS, \
}
#endif /* !__ASSEMBLY__ */
diff --git a/arch/riscv/include/asm/uaccess.h b/arch/riscv/include/asm/uaccess.h
index f56c66b..c47e6b3 100644
--- a/arch/riscv/include/asm/uaccess.h
+++ b/arch/riscv/include/asm/uaccess.h
@@ -13,24 +13,6 @@
/*
* User space memory access functions
*/
-
-extern unsigned long __must_check __asm_copy_to_user(void __user *to,
- const void *from, unsigned long n);
-extern unsigned long __must_check __asm_copy_from_user(void *to,
- const void __user *from, unsigned long n);
-
-static inline unsigned long
-raw_copy_from_user(void *to, const void __user *from, unsigned long n)
-{
- return __asm_copy_from_user(to, from, n);
-}
-
-static inline unsigned long
-raw_copy_to_user(void __user *to, const void *from, unsigned long n)
-{
- return __asm_copy_to_user(to, from, n);
-}
-
#ifdef CONFIG_MMU
#include <linux/errno.h>
#include <linux/compiler.h>
@@ -44,29 +26,6 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long n)
#define __disable_user_access() \
__asm__ __volatile__ ("csrc sstatus, %0" : : "r" (SR_SUM) : "memory")
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not. If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-
-#define KERNEL_DS MAKE_MM_SEG(~0UL)
-#define USER_DS MAKE_MM_SEG(TASK_SIZE)
-
-#define get_fs() (current_thread_info()->addr_limit)
-
-static inline void set_fs(mm_segment_t fs)
-{
- current_thread_info()->addr_limit = fs;
-}
-
-#define uaccess_kernel() (get_fs().seg == KERNEL_DS.seg)
-#define user_addr_max() (get_fs().seg)
-
/**
* access_ok: - Checks if a user space pointer is valid
* @addr: User space pointer to start of block to check
@@ -94,9 +53,7 @@ static inline void set_fs(mm_segment_t fs)
*/
static inline int __access_ok(unsigned long addr, unsigned long size)
{
- const mm_segment_t fs = get_fs();
-
- return size <= fs.seg && addr <= fs.seg - size;
+ return size <= TASK_SIZE && addr <= TASK_SIZE - size;
}
/*
@@ -125,7 +82,6 @@ static inline int __access_ok(unsigned long addr, unsigned long size)
do { \
uintptr_t __tmp; \
__typeof__(x) __x; \
- __enable_user_access(); \
__asm__ __volatile__ ( \
"1:\n" \
" " insn " %1, %3\n" \
@@ -143,7 +99,6 @@ do { \
" .previous" \
: "+r" (err), "=&r" (__x), "=r" (__tmp) \
: "m" (*(ptr)), "i" (-EFAULT)); \
- __disable_user_access(); \
(x) = __x; \
} while (0)
@@ -156,7 +111,6 @@ do { \
u32 __user *__ptr = (u32 __user *)(ptr); \
u32 __lo, __hi; \
uintptr_t __tmp; \
- __enable_user_access(); \
__asm__ __volatile__ ( \
"1:\n" \
" lw %1, %4\n" \
@@ -180,12 +134,30 @@ do { \
"=r" (__tmp) \
: "m" (__ptr[__LSW]), "m" (__ptr[__MSW]), \
"i" (-EFAULT)); \
- __disable_user_access(); \
(x) = (__typeof__(x))((__typeof__((x)-(x)))( \
(((u64)__hi << 32) | __lo))); \
} while (0)
#endif /* CONFIG_64BIT */
+#define __get_user_nocheck(x, __gu_ptr, __gu_err) \
+do { \
+ switch (sizeof(*__gu_ptr)) { \
+ case 1: \
+ __get_user_asm("lb", (x), __gu_ptr, __gu_err); \
+ break; \
+ case 2: \
+ __get_user_asm("lh", (x), __gu_ptr, __gu_err); \
+ break; \
+ case 4: \
+ __get_user_asm("lw", (x), __gu_ptr, __gu_err); \
+ break; \
+ case 8: \
+ __get_user_8((x), __gu_ptr, __gu_err); \
+ break; \
+ default: \
+ BUILD_BUG(); \
+ } \
+} while (0)
/**
* __get_user: - Get a simple variable from user space, with less checking.
@@ -209,25 +181,15 @@ do { \
*/
#define __get_user(x, ptr) \
({ \
- register long __gu_err = 0; \
const __typeof__(*(ptr)) __user *__gu_ptr = (ptr); \
+ long __gu_err = 0; \
+ \
__chk_user_ptr(__gu_ptr); \
- switch (sizeof(*__gu_ptr)) { \
- case 1: \
- __get_user_asm("lb", (x), __gu_ptr, __gu_err); \
- break; \
- case 2: \
- __get_user_asm("lh", (x), __gu_ptr, __gu_err); \
- break; \
- case 4: \
- __get_user_asm("lw", (x), __gu_ptr, __gu_err); \
- break; \
- case 8: \
- __get_user_8((x), __gu_ptr, __gu_err); \
- break; \
- default: \
- BUILD_BUG(); \
- } \
+ \
+ __enable_user_access(); \
+ __get_user_nocheck(x, __gu_ptr, __gu_err); \
+ __disable_user_access(); \
+ \
__gu_err; \
})
@@ -261,7 +223,6 @@ do { \
do { \
uintptr_t __tmp; \
__typeof__(*(ptr)) __x = x; \
- __enable_user_access(); \
__asm__ __volatile__ ( \
"1:\n" \
" " insn " %z3, %2\n" \
@@ -278,7 +239,6 @@ do { \
" .previous" \
: "+r" (err), "=r" (__tmp), "=m" (*(ptr)) \
: "rJ" (__x), "i" (-EFAULT)); \
- __disable_user_access(); \
} while (0)
#ifdef CONFIG_64BIT
@@ -290,7 +250,6 @@ do { \
u32 __user *__ptr = (u32 __user *)(ptr); \
u64 __x = (__typeof__((x)-(x)))(x); \
uintptr_t __tmp; \
- __enable_user_access(); \
__asm__ __volatile__ ( \
"1:\n" \
" sw %z4, %2\n" \
@@ -312,10 +271,28 @@ do { \
"=m" (__ptr[__LSW]), \
"=m" (__ptr[__MSW]) \
: "rJ" (__x), "rJ" (__x >> 32), "i" (-EFAULT)); \
- __disable_user_access(); \
} while (0)
#endif /* CONFIG_64BIT */
+#define __put_user_nocheck(x, __gu_ptr, __pu_err) \
+do { \
+ switch (sizeof(*__gu_ptr)) { \
+ case 1: \
+ __put_user_asm("sb", (x), __gu_ptr, __pu_err); \
+ break; \
+ case 2: \
+ __put_user_asm("sh", (x), __gu_ptr, __pu_err); \
+ break; \
+ case 4: \
+ __put_user_asm("sw", (x), __gu_ptr, __pu_err); \
+ break; \
+ case 8: \
+ __put_user_8((x), __gu_ptr, __pu_err); \
+ break; \
+ default: \
+ BUILD_BUG(); \
+ } \
+} while (0)
/**
* __put_user: - Write a simple value into user space, with less checking.
@@ -338,25 +315,15 @@ do { \
*/
#define __put_user(x, ptr) \
({ \
- register long __pu_err = 0; \
__typeof__(*(ptr)) __user *__gu_ptr = (ptr); \
+ long __pu_err = 0; \
+ \
__chk_user_ptr(__gu_ptr); \
- switch (sizeof(*__gu_ptr)) { \
- case 1: \
- __put_user_asm("sb", (x), __gu_ptr, __pu_err); \
- break; \
- case 2: \
- __put_user_asm("sh", (x), __gu_ptr, __pu_err); \
- break; \
- case 4: \
- __put_user_asm("sw", (x), __gu_ptr, __pu_err); \
- break; \
- case 8: \
- __put_user_8((x), __gu_ptr, __pu_err); \
- break; \
- default: \
- BUILD_BUG(); \
- } \
+ \
+ __enable_user_access(); \
+ __put_user_nocheck(x, __gu_ptr, __pu_err); \
+ __disable_user_access(); \
+ \
__pu_err; \
})
@@ -385,6 +352,24 @@ do { \
-EFAULT; \
})
+
+unsigned long __must_check __asm_copy_to_user(void __user *to,
+ const void *from, unsigned long n);
+unsigned long __must_check __asm_copy_from_user(void *to,
+ const void __user *from, unsigned long n);
+
+static inline unsigned long
+raw_copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+ return __asm_copy_from_user(to, from, n);
+}
+
+static inline unsigned long
+raw_copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+ return __asm_copy_to_user(to, from, n);
+}
+
extern long strncpy_from_user(char *dest, const char __user *src, long count);
extern long __must_check strlen_user(const char __user *str);
@@ -476,6 +461,26 @@ unsigned long __must_check clear_user(void __user *to, unsigned long n)
__ret; \
})
+#define HAVE_GET_KERNEL_NOFAULT
+
+#define __get_kernel_nofault(dst, src, type, err_label) \
+do { \
+ long __kr_err; \
+ \
+ __get_user_nocheck(*((type *)(dst)), (type *)(src), __kr_err); \
+ if (unlikely(__kr_err)) \
+ goto err_label; \
+} while (0)
+
+#define __put_kernel_nofault(dst, src, type, err_label) \
+do { \
+ long __kr_err; \
+ \
+ __put_user_nocheck(*((type *)(dst)), (type *)(src), __kr_err); \
+ if (unlikely(__kr_err)) \
+ goto err_label; \
+} while (0)
+
#else /* CONFIG_MMU */
#include <asm-generic/uaccess.h>
#endif /* CONFIG_MMU */
diff --git a/arch/riscv/kernel/process.c b/arch/riscv/kernel/process.c
index 2b97c49..19225ec 100644
--- a/arch/riscv/kernel/process.c
+++ b/arch/riscv/kernel/process.c
@@ -84,7 +84,6 @@ void start_thread(struct pt_regs *regs, unsigned long pc,
}
regs->epc = pc;
regs->sp = sp;
- set_fs(USER_DS);
}
void flush_thread(void)
diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile
index 0d0db80..47e7a82 100644
--- a/arch/riscv/lib/Makefile
+++ b/arch/riscv/lib/Makefile
@@ -2,5 +2,5 @@
lib-y += delay.o
lib-y += memcpy.o
lib-y += memset.o
-lib-y += uaccess.o
+lib-$(CONFIG_MMU) += uaccess.o
lib-$(CONFIG_64BIT) += tishift.o
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 1c80f17..017de6c 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -544,6 +544,9 @@
pushq %rsi
call set_sev_encryption_mask
call load_stage2_idt
+
+ /* Pass boot_params to initialize_identity_maps() */
+ movq (%rsp), %rdi
call initialize_identity_maps
popq %rsi
diff --git a/arch/x86/boot/compressed/ident_map_64.c b/arch/x86/boot/compressed/ident_map_64.c
index 063a60e..a5e5db6 100644
--- a/arch/x86/boot/compressed/ident_map_64.c
+++ b/arch/x86/boot/compressed/ident_map_64.c
@@ -33,11 +33,11 @@
#define __PAGE_OFFSET __PAGE_OFFSET_BASE
#include "../../mm/ident_map.c"
-#ifdef CONFIG_X86_5LEVEL
-unsigned int __pgtable_l5_enabled;
-unsigned int pgdir_shift = 39;
-unsigned int ptrs_per_p4d = 1;
-#endif
+#define _SETUP
+#include <asm/setup.h> /* For COMMAND_LINE_SIZE */
+#undef _SETUP
+
+extern unsigned long get_cmd_line_ptr(void);
/* Used by PAGE_KERN* macros: */
pteval_t __default_kernel_pte_mask __read_mostly = ~0;
@@ -107,8 +107,10 @@ static void add_identity_map(unsigned long start, unsigned long end)
}
/* Locates and clears a region for a new top level page table. */
-void initialize_identity_maps(void)
+void initialize_identity_maps(void *rmode)
{
+ unsigned long cmdline;
+
/* Exclude the encryption mask from __PHYSICAL_MASK */
physical_mask &= ~sme_me_mask;
@@ -149,10 +151,19 @@ void initialize_identity_maps(void)
}
/*
- * New page-table is set up - map the kernel image and load it
- * into cr3.
+ * New page-table is set up - map the kernel image, boot_params and the
+ * command line. The uncompressed kernel requires boot_params and the
+ * command line to be mapped in the identity mapping. Map them
+ * explicitly here in case the compressed kernel does not touch them,
+ * or does not touch all the pages covering them.
*/
add_identity_map((unsigned long)_head, (unsigned long)_end);
+ boot_params = rmode;
+ add_identity_map((unsigned long)boot_params, (unsigned long)(boot_params + 1));
+ cmdline = get_cmd_line_ptr();
+ add_identity_map(cmdline, cmdline + COMMAND_LINE_SIZE);
+
+ /* Load the new page-table. */
write_cr3(top_level_pgt);
}
diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
index b59547c..b92fffb 100644
--- a/arch/x86/boot/compressed/kaslr.c
+++ b/arch/x86/boot/compressed/kaslr.c
@@ -840,14 +840,6 @@ void choose_random_location(unsigned long input,
return;
}
-#ifdef CONFIG_X86_5LEVEL
- if (__read_cr4() & X86_CR4_LA57) {
- __pgtable_l5_enabled = 1;
- pgdir_shift = 48;
- ptrs_per_p4d = 512;
- }
-#endif
-
boot_params->hdr.loadflags |= KASLR_FLAG;
if (IS_ENABLED(CONFIG_X86_32))
diff --git a/arch/x86/boot/compressed/pgtable_64.c b/arch/x86/boot/compressed/pgtable_64.c
index 7d0394f..5def167 100644
--- a/arch/x86/boot/compressed/pgtable_64.c
+++ b/arch/x86/boot/compressed/pgtable_64.c
@@ -8,6 +8,13 @@
#define BIOS_START_MIN 0x20000U /* 128K, less than this is insane */
#define BIOS_START_MAX 0x9f000U /* 640K, absolute maximum */
+#ifdef CONFIG_X86_5LEVEL
+/* __pgtable_l5_enabled needs to be in .data to avoid being cleared along with .bss */
+unsigned int __section(.data) __pgtable_l5_enabled;
+unsigned int __section(.data) pgdir_shift = 39;
+unsigned int __section(.data) ptrs_per_p4d = 1;
+#endif
+
struct paging_config {
unsigned long trampoline_start;
unsigned long l5_required;
@@ -198,4 +205,13 @@ void cleanup_trampoline(void *pgtable)
/* Restore trampoline memory */
memcpy(trampoline_32bit, trampoline_save, TRAMPOLINE_32BIT_SIZE);
+
+ /* Initialize variables for 5-level paging */
+#ifdef CONFIG_X86_5LEVEL
+ if (__read_cr4() & X86_CR4_LA57) {
+ __pgtable_l5_enabled = 1;
+ pgdir_shift = 48;
+ ptrs_per_p4d = 512;
+ }
+#endif
}
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index f136595..c9fa7be 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -208,16 +208,24 @@ extern void __put_user_nocheck_2(void);
extern void __put_user_nocheck_4(void);
extern void __put_user_nocheck_8(void);
+/*
+ * ptr must be evaluated and assigned to the temporary __ptr_pu before
+ * the assignment of x to __val_pu, to avoid any function calls
+ * involved in the ptr expression (possibly implicitly generated due
+ * to KASAN) from clobbering %ax.
+ */
#define do_put_user_call(fn,x,ptr) \
({ \
int __ret_pu; \
+ void __user *__ptr_pu; \
register __typeof__(*(ptr)) __val_pu asm("%"_ASM_AX); \
__chk_user_ptr(ptr); \
+ __ptr_pu = (ptr); \
__val_pu = (x); \
asm volatile("call __" #fn "_%P[size]" \
: "=c" (__ret_pu), \
ASM_CALL_CONSTRAINT \
- : "0" (ptr), \
+ : "0" (__ptr_pu), \
"r" (__val_pu), \
[size] "i" (sizeof(*(ptr))) \
:"ebx"); \
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 04ceea8..68608bd 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -47,6 +47,8 @@
# non-deterministic coverage.
KCOV_INSTRUMENT := n
+CFLAGS_head$(BITS).o += -fno-stack-protector
+
CFLAGS_irq.o := -I $(srctree)/$(src)/../include/asm/trace
obj-y := process_$(BITS).o signal.o
diff --git a/arch/x86/kvm/ioapic.c b/arch/x86/kvm/ioapic.c
index d057376..698969e 100644
--- a/arch/x86/kvm/ioapic.c
+++ b/arch/x86/kvm/ioapic.c
@@ -197,12 +197,9 @@ static void ioapic_lazy_update_eoi(struct kvm_ioapic *ioapic, int irq)
/*
* If no longer has pending EOI in LAPICs, update
- * EOI for this vetor.
+ * EOI for this vector.
*/
rtc_irq_eoi(ioapic, vcpu, entry->fields.vector);
- kvm_ioapic_update_eoi_one(vcpu, ioapic,
- entry->fields.trig_mode,
- irq);
break;
}
}
diff --git a/arch/x86/kvm/mmu/tdp_mmu.c b/arch/x86/kvm/mmu/tdp_mmu.c
index e246d71..27e381c 100644
--- a/arch/x86/kvm/mmu/tdp_mmu.c
+++ b/arch/x86/kvm/mmu/tdp_mmu.c
@@ -209,7 +209,7 @@ static void __handle_changed_spte(struct kvm *kvm, int as_id, gfn_t gfn,
WARN_ON(level > PT64_ROOT_MAX_LEVEL);
WARN_ON(level < PG_LEVEL_4K);
- WARN_ON(gfn % KVM_PAGES_PER_HPAGE(level));
+ WARN_ON(gfn & (KVM_PAGES_PER_HPAGE(level) - 1));
/*
* If this warning were to trigger it would indicate that there was a
diff --git a/arch/x86/kvm/vmx/posted_intr.c b/arch/x86/kvm/vmx/posted_intr.c
index e4e7adf..f02962d 100644
--- a/arch/x86/kvm/vmx/posted_intr.c
+++ b/arch/x86/kvm/vmx/posted_intr.c
@@ -222,7 +222,7 @@ void pi_wakeup_handler(void)
spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
}
-void __init pi_init(int cpu)
+void __init pi_init_cpu(int cpu)
{
INIT_LIST_HEAD(&per_cpu(blocked_vcpu_on_cpu, cpu));
spin_lock_init(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
diff --git a/arch/x86/kvm/vmx/posted_intr.h b/arch/x86/kvm/vmx/posted_intr.h
index e53b97f..0bdc413 100644
--- a/arch/x86/kvm/vmx/posted_intr.h
+++ b/arch/x86/kvm/vmx/posted_intr.h
@@ -91,9 +91,9 @@ void vmx_vcpu_pi_put(struct kvm_vcpu *vcpu);
int pi_pre_block(struct kvm_vcpu *vcpu);
void pi_post_block(struct kvm_vcpu *vcpu);
void pi_wakeup_handler(void);
-void __init pi_init(int cpu);
+void __init pi_init_cpu(int cpu);
bool pi_has_pending_interrupt(struct kvm_vcpu *vcpu);
int pi_update_irte(struct kvm *kvm, unsigned int host_irq, uint32_t guest_irq,
bool set);
-#endif /* __KVM_X86_VMX_POSTED_INTR_H */
\ No newline at end of file
+#endif /* __KVM_X86_VMX_POSTED_INTR_H */
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index ab6d2d1..d14c94d 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -8004,7 +8004,7 @@ static int __init vmx_init(void)
for_each_possible_cpu(cpu) {
INIT_LIST_HEAD(&per_cpu(loaded_vmcss_on_cpu, cpu));
- pi_init(cpu);
+ pi_init_cpu(cpu);
}
#ifdef CONFIG_KEXEC_CORE
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 2097fa0..c1b2f76 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -88,14 +88,17 @@ int xen_smp_intr_init(unsigned int cpu)
per_cpu(xen_callfunc_irq, cpu).irq = rc;
per_cpu(xen_callfunc_irq, cpu).name = callfunc_name;
- debug_name = kasprintf(GFP_KERNEL, "debug%d", cpu);
- rc = bind_virq_to_irqhandler(VIRQ_DEBUG, cpu, xen_debug_interrupt,
- IRQF_PERCPU | IRQF_NOBALANCING,
- debug_name, NULL);
- if (rc < 0)
- goto fail;
- per_cpu(xen_debug_irq, cpu).irq = rc;
- per_cpu(xen_debug_irq, cpu).name = debug_name;
+ if (!xen_fifo_events) {
+ debug_name = kasprintf(GFP_KERNEL, "debug%d", cpu);
+ rc = bind_virq_to_irqhandler(VIRQ_DEBUG, cpu,
+ xen_debug_interrupt,
+ IRQF_PERCPU | IRQF_NOBALANCING,
+ debug_name, NULL);
+ if (rc < 0)
+ goto fail;
+ per_cpu(xen_debug_irq, cpu).irq = rc;
+ per_cpu(xen_debug_irq, cpu).name = debug_name;
+ }
callfunc_name = kasprintf(GFP_KERNEL, "callfuncsingle%d", cpu);
rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_SINGLE_VECTOR,
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index 45d556f..9546c33 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -29,6 +29,8 @@ extern struct start_info *xen_start_info;
extern struct shared_info xen_dummy_shared_info;
extern struct shared_info *HYPERVISOR_shared_info;
+extern bool xen_fifo_events;
+
void xen_setup_mfn_list_list(void);
void xen_build_mfn_list_list(void);
void xen_setup_machphys_mapping(void);
diff --git a/block/blk-core.c b/block/blk-core.c
index ac00d2f..2db8bda 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -186,6 +186,10 @@ static const struct {
/* device mapper special case, should not leak out: */
[BLK_STS_DM_REQUEUE] = { -EREMCHG, "dm internal retry" },
+ /* zone device specific errors */
+ [BLK_STS_ZONE_OPEN_RESOURCE] = { -ETOOMANYREFS, "open zones exceeded" },
+ [BLK_STS_ZONE_ACTIVE_RESOURCE] = { -EOVERFLOW, "active zones exceeded" },
+
/* everything else not covered above: */
[BLK_STS_IOERR] = { -EIO, "I/O" },
};
diff --git a/block/blk-mq-cpumap.c b/block/blk-mq-cpumap.c
index 0157f2b..3db84d3 100644
--- a/block/blk-mq-cpumap.c
+++ b/block/blk-mq-cpumap.c
@@ -89,7 +89,7 @@ int blk_mq_hw_queue_to_node(struct blk_mq_queue_map *qmap, unsigned int index)
for_each_possible_cpu(i) {
if (index == qmap->mq_map[i])
- return local_memory_node(cpu_to_node(i));
+ return cpu_to_node(i);
}
return NUMA_NO_NODE;
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 6964502..55bcee5 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1664,7 +1664,7 @@ void blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx, bool async)
EXPORT_SYMBOL(blk_mq_run_hw_queue);
/**
- * blk_mq_run_hw_queue - Run all hardware queues in a request queue.
+ * blk_mq_run_hw_queues - Run all hardware queues in a request queue.
* @q: Pointer to the request queue to run.
* @async: If we want to run the queue asynchronously.
*/
@@ -2743,7 +2743,7 @@ static void blk_mq_init_cpu_queues(struct request_queue *q,
for (j = 0; j < set->nr_maps; j++) {
hctx = blk_mq_map_queue_type(q, j, i);
if (nr_hw_queues > 1 && hctx->numa_node == NUMA_NO_NODE)
- hctx->numa_node = local_memory_node(cpu_to_node(i));
+ hctx->numa_node = cpu_to_node(i);
}
}
}
diff --git a/drivers/acpi/acpi_dbg.c b/drivers/acpi/acpi_dbg.c
index 6041974..fb72903 100644
--- a/drivers/acpi/acpi_dbg.c
+++ b/drivers/acpi/acpi_dbg.c
@@ -749,6 +749,9 @@ static int __init acpi_aml_init(void)
{
int ret;
+ if (acpi_disabled)
+ return -ENODEV;
+
/* Initialize AML IO interface */
mutex_init(&acpi_aml_io.lock);
init_waitqueue_head(&acpi_aml_io.wait);
diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
index 412a972..2ee5e05 100644
--- a/drivers/acpi/acpi_processor.c
+++ b/drivers/acpi/acpi_processor.c
@@ -264,7 +264,6 @@ static int acpi_processor_get_info(struct acpi_device *device)
} else {
/*
* Declared with "Device" statement; match _UID.
- * Note that we don't handle string _UIDs yet.
*/
status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID,
NULL, &value);
diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c
index 37bb67e..b13a4ed 100644
--- a/drivers/acpi/acpica/hwgpe.c
+++ b/drivers/acpi/acpica/hwgpe.c
@@ -47,7 +47,7 @@ acpi_status acpi_hw_gpe_read(u64 *value, struct acpi_gpe_address *reg)
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
#ifdef ACPI_GPE_USE_LOGICAL_ADDRESSES
- *value = (u64)ACPI_GET8(reg->address);
+ *value = (u64)ACPI_GET8((unsigned long)reg->address);
return_ACPI_STATUS(AE_OK);
#else
return acpi_os_read_memory((acpi_physical_address)reg->address,
@@ -82,7 +82,7 @@ acpi_status acpi_hw_gpe_write(u64 value, struct acpi_gpe_address *reg)
{
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
#ifdef ACPI_GPE_USE_LOGICAL_ADDRESSES
- ACPI_SET8(reg->address, value);
+ ACPI_SET8((unsigned long)reg->address, value);
return_ACPI_STATUS(AE_OK);
#else
return acpi_os_write_memory((acpi_physical_address)reg->address,
diff --git a/drivers/acpi/dptf/Kconfig b/drivers/acpi/dptf/Kconfig
index 51f06f3..1e8c7ce 100644
--- a/drivers/acpi/dptf/Kconfig
+++ b/drivers/acpi/dptf/Kconfig
@@ -1,8 +1,25 @@
# SPDX-License-Identifier: GPL-2.0
-config DPTF_POWER
- tristate "DPTF Platform Power Participant"
+
+menuconfig ACPI_DPTF
+ bool "Intel DPTF (Dynamic Platform and Thermal Framework) Support"
depends on X86
help
+ Intel Dynamic Platform and Thermal Framework (DPTF) is a platform
+ level hardware/software solution for power and thermal management.
+
+ As a container for multiple power/thermal technologies, DPTF provides
+ a coordinated approach for different policies to effect the hardware
+ state of a system.
+
+ For more information see:
+ <https://01.org/intel%C2%AE-dynamic-platform-and-thermal-framework-dptf-chromium-os/overview>
+
+if ACPI_DPTF
+
+config DPTF_POWER
+ tristate "Platform Power DPTF Participant"
+ default m
+ help
This driver adds support for Dynamic Platform and Thermal Framework
(DPTF) Platform Power Participant device (INT3407) support.
This participant is responsible for exposing platform telemetry:
@@ -16,15 +33,17 @@
the module will be called dptf_power.
config DPTF_PCH_FIVR
- tristate "DPTF PCH FIVR Participant"
- depends on X86
+ tristate "PCH FIVR DPTF Participant"
+ default m
help
This driver adds support for Dynamic Platform and Thermal Framework
(DPTF) PCH FIVR Participant device support. This driver allows to
- switch PCH FIVR (Fully Integrated Voltage Regulator) frequency.
+ switch the PCH FIVR (Fully Integrated Voltage Regulator) frequency.
This participant is responsible for exposing:
freq_mhz_low_clock
freq_mhz_high_clock
To compile this driver as a module, choose M here:
the module will be called dptf_pch_fivr.
+
+endif
diff --git a/drivers/acpi/dptf/dptf_pch_fivr.c b/drivers/acpi/dptf/dptf_pch_fivr.c
index 4ab2888..4c1992f 100644
--- a/drivers/acpi/dptf/dptf_pch_fivr.c
+++ b/drivers/acpi/dptf/dptf_pch_fivr.c
@@ -114,7 +114,7 @@ static struct platform_driver pch_fivr_driver = {
.probe = pch_fivr_add,
.remove = pch_fivr_remove,
.driver = {
- .name = "DPTF PCH FIVR",
+ .name = "dptf_pch_fivr",
.acpi_match_table = pch_fivr_device_ids,
},
};
diff --git a/drivers/acpi/dptf/dptf_power.c b/drivers/acpi/dptf/dptf_power.c
index 92b996a..0674130 100644
--- a/drivers/acpi/dptf/dptf_power.c
+++ b/drivers/acpi/dptf/dptf_power.c
@@ -237,7 +237,7 @@ static struct platform_driver dptf_power_driver = {
.probe = dptf_power_add,
.remove = dptf_power_remove,
.driver = {
- .name = "DPTF Platform Power",
+ .name = "dptf_power",
.acpi_match_table = int3407_device_ids,
},
};
diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c
index ca707f5..2a61f88 100644
--- a/drivers/acpi/reboot.c
+++ b/drivers/acpi/reboot.c
@@ -3,6 +3,7 @@
#include <linux/pci.h>
#include <linux/acpi.h>
#include <acpi/reboot.h>
+#include <linux/delay.h>
#ifdef CONFIG_PCI
static void acpi_pci_reboot(struct acpi_generic_address *rr, u8 reset_value)
@@ -66,4 +67,14 @@ void acpi_reboot(void)
acpi_reset();
break;
}
+
+ /*
+ * Some platforms do not shut down immediately after writing to the
+ * ACPI reset register, and this results in racing with the
+ * subsequent reboot mechanism.
+ *
+ * The 15ms delay has been found to be long enough for the system
+ * to reboot on the affected platforms.
+ */
+ mdelay(15);
}
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index 838b719..d5411a1 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -104,7 +104,6 @@ acpi_extract_package(union acpi_object *package,
" [%c]\n",
i, format_string[i]);
return AE_BAD_DATA;
- break;
}
break;
@@ -129,7 +128,6 @@ acpi_extract_package(union acpi_object *package,
" expecting [%c]\n",
i, format_string[i]);
return AE_BAD_DATA;
- break;
}
break;
case ACPI_TYPE_LOCAL_REFERENCE:
@@ -144,7 +142,6 @@ acpi_extract_package(union acpi_object *package,
" expecting [%c]\n",
i, format_string[i]);
return AE_BAD_DATA;
- break;
}
break;
@@ -155,7 +152,6 @@ acpi_extract_package(union acpi_object *package,
i));
/* TBD: handle nested packages... */
return AE_SUPPORT;
- break;
}
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index f546a57..61c7629 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5616,7 +5616,7 @@ int ata_host_start(struct ata_host *host)
EXPORT_SYMBOL_GPL(ata_host_start);
/**
- * ata_sas_host_init - Initialize a host struct for sas (ipr, libsas)
+ * ata_host_init - Initialize a host struct for sas (ipr, libsas)
* @host: host to initialize
* @dev: device host is attached to
* @ops: port_ops
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index d912eaa..b6f9205 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1115,7 +1115,7 @@ void ata_eh_freeze_port(struct ata_port *ap)
EXPORT_SYMBOL_GPL(ata_eh_freeze_port);
/**
- * ata_port_thaw_port - EH helper to thaw port
+ * ata_eh_thaw_port - EH helper to thaw port
* @ap: ATA port to thaw
*
* Thaw frozen port @ap.
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 7043191..48b8934 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1003,7 +1003,7 @@ void ata_scsi_sdev_config(struct scsi_device *sdev)
}
/**
- * atapi_drain_needed - Check whether data transfer may overflow
+ * ata_scsi_dma_need_drain - Check whether data transfer may overflow
* @rq: request to be checked
*
* ATAPI commands which transfer variable length data to host
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index 4b2ba81..1532b2e 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * pata_ns87415.c - NS87415 (non PARISC) PATA
+ * pata_ns87415.c - NS87415 (and PARISC SUPERIO 87560) PATA
*
* (C) 2005 Red Hat <alan@lxorguk.ukuu.org.uk>
*
@@ -16,7 +16,6 @@
* systems. This has its own special mountain of errata.
*
* TODO:
- * Test PARISC SuperIO
* Get someone to test on SPARC
* Implement lazy pio/dma switching for better performance
* 8bit shared timing.
diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index 141ac60..44b0ed8 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -120,7 +120,7 @@
/* Descriptor table word 0 bit (when DTA32M = 1) */
#define SATA_RCAR_DTEND BIT(0)
-#define SATA_RCAR_DMA_BOUNDARY 0x1FFFFFFEUL
+#define SATA_RCAR_DMA_BOUNDARY 0x1FFFFFFFUL
/* Gen2 Physical Layer Control Registers */
#define RCAR_GEN2_PHY_CTL1_REG 0x1704
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 05bb4d4..7432689 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -415,26 +415,45 @@ static int _genpd_power_on(struct generic_pm_domain *genpd, bool timed)
s64 elapsed_ns;
int ret;
- if (!genpd->power_on)
- return 0;
+ /* Notify consumers that we are about to power on. */
+ ret = raw_notifier_call_chain_robust(&genpd->power_notifiers,
+ GENPD_NOTIFY_PRE_ON,
+ GENPD_NOTIFY_OFF, NULL);
+ ret = notifier_to_errno(ret);
+ if (ret)
+ return ret;
- if (!timed)
- return genpd->power_on(genpd);
+ if (!genpd->power_on)
+ goto out;
+
+ if (!timed) {
+ ret = genpd->power_on(genpd);
+ if (ret)
+ goto err;
+
+ goto out;
+ }
time_start = ktime_get();
ret = genpd->power_on(genpd);
if (ret)
- return ret;
+ goto err;
elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start));
if (elapsed_ns <= genpd->states[state_idx].power_on_latency_ns)
- return ret;
+ goto out;
genpd->states[state_idx].power_on_latency_ns = elapsed_ns;
genpd->max_off_time_changed = true;
pr_debug("%s: Power-%s latency exceeded, new value %lld ns\n",
genpd->name, "on", elapsed_ns);
+out:
+ raw_notifier_call_chain(&genpd->power_notifiers, GENPD_NOTIFY_ON, NULL);
+ return 0;
+err:
+ raw_notifier_call_chain(&genpd->power_notifiers, GENPD_NOTIFY_OFF,
+ NULL);
return ret;
}
@@ -445,27 +464,46 @@ static int _genpd_power_off(struct generic_pm_domain *genpd, bool timed)
s64 elapsed_ns;
int ret;
- if (!genpd->power_off)
- return 0;
+ /* Notify consumers that we are about to power off. */
+ ret = raw_notifier_call_chain_robust(&genpd->power_notifiers,
+ GENPD_NOTIFY_PRE_OFF,
+ GENPD_NOTIFY_ON, NULL);
+ ret = notifier_to_errno(ret);
+ if (ret)
+ return ret;
- if (!timed)
- return genpd->power_off(genpd);
+ if (!genpd->power_off)
+ goto out;
+
+ if (!timed) {
+ ret = genpd->power_off(genpd);
+ if (ret)
+ goto busy;
+
+ goto out;
+ }
time_start = ktime_get();
ret = genpd->power_off(genpd);
if (ret)
- return ret;
+ goto busy;
elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start));
if (elapsed_ns <= genpd->states[state_idx].power_off_latency_ns)
- return 0;
+ goto out;
genpd->states[state_idx].power_off_latency_ns = elapsed_ns;
genpd->max_off_time_changed = true;
pr_debug("%s: Power-%s latency exceeded, new value %lld ns\n",
genpd->name, "off", elapsed_ns);
+out:
+ raw_notifier_call_chain(&genpd->power_notifiers, GENPD_NOTIFY_OFF,
+ NULL);
return 0;
+busy:
+ raw_notifier_call_chain(&genpd->power_notifiers, GENPD_NOTIFY_ON, NULL);
+ return ret;
}
/**
@@ -550,11 +588,14 @@ static int genpd_power_off(struct generic_pm_domain *genpd, bool one_dev_on,
return -EBUSY;
ret = _genpd_power_off(genpd, true);
- if (ret)
+ if (ret) {
+ genpd->states[genpd->state_idx].rejected++;
return ret;
+ }
genpd->status = GENPD_STATE_OFF;
genpd_update_accounting(genpd);
+ genpd->states[genpd->state_idx].usage++;
list_for_each_entry(link, &genpd->child_links, child_node) {
genpd_sd_counter_dec(link->parent);
@@ -1270,13 +1311,14 @@ static int genpd_restore_noirq(struct device *dev)
* first time for the given domain in the present cycle.
*/
genpd_lock(genpd);
- if (genpd->suspended_count++ == 0)
+ if (genpd->suspended_count++ == 0) {
/*
* The boot kernel might put the domain into arbitrary state,
* so make it appear as powered off to genpd_sync_power_on(),
* so that it tries to power it on in case it was really off.
*/
genpd->status = GENPD_STATE_OFF;
+ }
genpd_sync_power_on(genpd, true, 0);
genpd_unlock(genpd);
@@ -1592,6 +1634,101 @@ int pm_genpd_remove_device(struct device *dev)
}
EXPORT_SYMBOL_GPL(pm_genpd_remove_device);
+/**
+ * dev_pm_genpd_add_notifier - Add a genpd power on/off notifier for @dev
+ *
+ * @dev: Device that should be associated with the notifier
+ * @nb: The notifier block to register
+ *
+ * Users may call this function to add a genpd power on/off notifier for an
+ * attached @dev. Only one notifier per device is allowed. The notifier is
+ * sent when genpd is powering on/off the PM domain.
+ *
+ * It is assumed that the user guarantee that the genpd wouldn't be detached
+ * while this routine is getting called.
+ *
+ * Returns 0 on success and negative error values on failures.
+ */
+int dev_pm_genpd_add_notifier(struct device *dev, struct notifier_block *nb)
+{
+ struct generic_pm_domain *genpd;
+ struct generic_pm_domain_data *gpd_data;
+ int ret;
+
+ genpd = dev_to_genpd_safe(dev);
+ if (!genpd)
+ return -ENODEV;
+
+ if (WARN_ON(!dev->power.subsys_data ||
+ !dev->power.subsys_data->domain_data))
+ return -EINVAL;
+
+ gpd_data = to_gpd_data(dev->power.subsys_data->domain_data);
+ if (gpd_data->power_nb)
+ return -EEXIST;
+
+ genpd_lock(genpd);
+ ret = raw_notifier_chain_register(&genpd->power_notifiers, nb);
+ genpd_unlock(genpd);
+
+ if (ret) {
+ dev_warn(dev, "failed to add notifier for PM domain %s\n",
+ genpd->name);
+ return ret;
+ }
+
+ gpd_data->power_nb = nb;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dev_pm_genpd_add_notifier);
+
+/**
+ * dev_pm_genpd_remove_notifier - Remove a genpd power on/off notifier for @dev
+ *
+ * @dev: Device that is associated with the notifier
+ *
+ * Users may call this function to remove a genpd power on/off notifier for an
+ * attached @dev.
+ *
+ * It is assumed that the user guarantee that the genpd wouldn't be detached
+ * while this routine is getting called.
+ *
+ * Returns 0 on success and negative error values on failures.
+ */
+int dev_pm_genpd_remove_notifier(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+ struct generic_pm_domain_data *gpd_data;
+ int ret;
+
+ genpd = dev_to_genpd_safe(dev);
+ if (!genpd)
+ return -ENODEV;
+
+ if (WARN_ON(!dev->power.subsys_data ||
+ !dev->power.subsys_data->domain_data))
+ return -EINVAL;
+
+ gpd_data = to_gpd_data(dev->power.subsys_data->domain_data);
+ if (!gpd_data->power_nb)
+ return -ENODEV;
+
+ genpd_lock(genpd);
+ ret = raw_notifier_chain_unregister(&genpd->power_notifiers,
+ gpd_data->power_nb);
+ genpd_unlock(genpd);
+
+ if (ret) {
+ dev_warn(dev, "failed to remove notifier for PM domain %s\n",
+ genpd->name);
+ return ret;
+ }
+
+ gpd_data->power_nb = NULL;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dev_pm_genpd_remove_notifier);
+
static int genpd_add_subdomain(struct generic_pm_domain *genpd,
struct generic_pm_domain *subdomain)
{
@@ -1762,6 +1899,7 @@ int pm_genpd_init(struct generic_pm_domain *genpd,
INIT_LIST_HEAD(&genpd->parent_links);
INIT_LIST_HEAD(&genpd->child_links);
INIT_LIST_HEAD(&genpd->dev_list);
+ RAW_INIT_NOTIFIER_HEAD(&genpd->power_notifiers);
genpd_lock_init(genpd);
genpd->gov = gov;
INIT_WORK(&genpd->power_off_work, genpd_power_off_work_fn);
@@ -2923,7 +3061,7 @@ static int idle_states_show(struct seq_file *s, void *data)
if (ret)
return -ERESTARTSYS;
- seq_puts(s, "State Time Spent(ms)\n");
+ seq_puts(s, "State Time Spent(ms) Usage Rejected\n");
for (i = 0; i < genpd->state_count; i++) {
ktime_t delta = 0;
@@ -2935,7 +3073,8 @@ static int idle_states_show(struct seq_file *s, void *data)
msecs = ktime_to_ms(
ktime_add(genpd->states[i].idle_time, delta));
- seq_printf(s, "S%-13i %lld\n", i, msecs);
+ seq_printf(s, "S%-13i %-14lld %-14llu %llu\n", i, msecs,
+ genpd->states[i].usage, genpd->states[i].rejected);
}
genpd_unlock(genpd);
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 205a067..c7ac490 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -363,7 +363,6 @@ static pm_callback_t pm_op(const struct dev_pm_ops *ops, pm_message_t state)
case PM_EVENT_THAW:
case PM_EVENT_RECOVER:
return ops->thaw;
- break;
case PM_EVENT_RESTORE:
return ops->restore;
#endif /* CONFIG_HIBERNATE_CALLBACKS */
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 3c9485a..0bed21c 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -802,9 +802,9 @@ static void recv_work(struct work_struct *work)
if (likely(!blk_should_fake_timeout(rq->q)))
blk_mq_complete_request(rq);
}
+ nbd_config_put(nbd);
atomic_dec(&config->recv_threads);
wake_up(&config->recv_wq);
- nbd_config_put(nbd);
kfree(args);
}
diff --git a/drivers/block/null_blk_zoned.c b/drivers/block/null_blk_zoned.c
index fa0cc70..7d94f2d 100644
--- a/drivers/block/null_blk_zoned.c
+++ b/drivers/block/null_blk_zoned.c
@@ -220,29 +220,34 @@ static void null_close_first_imp_zone(struct nullb_device *dev)
}
}
-static bool null_can_set_active(struct nullb_device *dev)
+static blk_status_t null_check_active(struct nullb_device *dev)
{
if (!dev->zone_max_active)
- return true;
+ return BLK_STS_OK;
- return dev->nr_zones_exp_open + dev->nr_zones_imp_open +
- dev->nr_zones_closed < dev->zone_max_active;
+ if (dev->nr_zones_exp_open + dev->nr_zones_imp_open +
+ dev->nr_zones_closed < dev->zone_max_active)
+ return BLK_STS_OK;
+
+ return BLK_STS_ZONE_ACTIVE_RESOURCE;
}
-static bool null_can_open(struct nullb_device *dev)
+static blk_status_t null_check_open(struct nullb_device *dev)
{
if (!dev->zone_max_open)
- return true;
+ return BLK_STS_OK;
if (dev->nr_zones_exp_open + dev->nr_zones_imp_open < dev->zone_max_open)
- return true;
+ return BLK_STS_OK;
- if (dev->nr_zones_imp_open && null_can_set_active(dev)) {
- null_close_first_imp_zone(dev);
- return true;
+ if (dev->nr_zones_imp_open) {
+ if (null_check_active(dev) == BLK_STS_OK) {
+ null_close_first_imp_zone(dev);
+ return BLK_STS_OK;
+ }
}
- return false;
+ return BLK_STS_ZONE_OPEN_RESOURCE;
}
/*
@@ -258,19 +263,22 @@ static bool null_can_open(struct nullb_device *dev)
* it is not certain that closing an implicit open zone will allow a new zone
* to be opened, since we might already be at the active limit capacity.
*/
-static bool null_has_zone_resources(struct nullb_device *dev, struct blk_zone *zone)
+static blk_status_t null_check_zone_resources(struct nullb_device *dev, struct blk_zone *zone)
{
+ blk_status_t ret;
+
switch (zone->cond) {
case BLK_ZONE_COND_EMPTY:
- if (!null_can_set_active(dev))
- return false;
+ ret = null_check_active(dev);
+ if (ret != BLK_STS_OK)
+ return ret;
fallthrough;
case BLK_ZONE_COND_CLOSED:
- return null_can_open(dev);
+ return null_check_open(dev);
default:
/* Should never be called for other states */
WARN_ON(1);
- return false;
+ return BLK_STS_IOERR;
}
}
@@ -293,8 +301,9 @@ static blk_status_t null_zone_write(struct nullb_cmd *cmd, sector_t sector,
return BLK_STS_IOERR;
case BLK_ZONE_COND_EMPTY:
case BLK_ZONE_COND_CLOSED:
- if (!null_has_zone_resources(dev, zone))
- return BLK_STS_IOERR;
+ ret = null_check_zone_resources(dev, zone);
+ if (ret != BLK_STS_OK)
+ return ret;
break;
case BLK_ZONE_COND_IMP_OPEN:
case BLK_ZONE_COND_EXP_OPEN:
@@ -349,6 +358,8 @@ static blk_status_t null_zone_write(struct nullb_cmd *cmd, sector_t sector,
static blk_status_t null_open_zone(struct nullb_device *dev, struct blk_zone *zone)
{
+ blk_status_t ret;
+
if (zone->type == BLK_ZONE_TYPE_CONVENTIONAL)
return BLK_STS_IOERR;
@@ -357,15 +368,17 @@ static blk_status_t null_open_zone(struct nullb_device *dev, struct blk_zone *zo
/* open operation on exp open is not an error */
return BLK_STS_OK;
case BLK_ZONE_COND_EMPTY:
- if (!null_has_zone_resources(dev, zone))
- return BLK_STS_IOERR;
+ ret = null_check_zone_resources(dev, zone);
+ if (ret != BLK_STS_OK)
+ return ret;
break;
case BLK_ZONE_COND_IMP_OPEN:
dev->nr_zones_imp_open--;
break;
case BLK_ZONE_COND_CLOSED:
- if (!null_has_zone_resources(dev, zone))
- return BLK_STS_IOERR;
+ ret = null_check_zone_resources(dev, zone);
+ if (ret != BLK_STS_OK)
+ return ret;
dev->nr_zones_closed--;
break;
case BLK_ZONE_COND_FULL:
@@ -381,6 +394,8 @@ static blk_status_t null_open_zone(struct nullb_device *dev, struct blk_zone *zo
static blk_status_t null_finish_zone(struct nullb_device *dev, struct blk_zone *zone)
{
+ blk_status_t ret;
+
if (zone->type == BLK_ZONE_TYPE_CONVENTIONAL)
return BLK_STS_IOERR;
@@ -389,8 +404,9 @@ static blk_status_t null_finish_zone(struct nullb_device *dev, struct blk_zone *
/* finish operation on full is not an error */
return BLK_STS_OK;
case BLK_ZONE_COND_EMPTY:
- if (!null_has_zone_resources(dev, zone))
- return BLK_STS_IOERR;
+ ret = null_check_zone_resources(dev, zone);
+ if (ret != BLK_STS_OK)
+ return ret;
break;
case BLK_ZONE_COND_IMP_OPEN:
dev->nr_zones_imp_open--;
@@ -399,8 +415,9 @@ static blk_status_t null_finish_zone(struct nullb_device *dev, struct blk_zone *
dev->nr_zones_exp_open--;
break;
case BLK_ZONE_COND_CLOSED:
- if (!null_has_zone_resources(dev, zone))
- return BLK_STS_IOERR;
+ ret = null_check_zone_resources(dev, zone);
+ if (ret != BLK_STS_OK)
+ return ret;
dev->nr_zones_closed--;
break;
default:
diff --git a/drivers/block/rnbd/rnbd-clt.c b/drivers/block/rnbd/rnbd-clt.c
index d7a6974..8b2411c 100644
--- a/drivers/block/rnbd/rnbd-clt.c
+++ b/drivers/block/rnbd/rnbd-clt.c
@@ -91,11 +91,6 @@ static int rnbd_clt_set_dev_attr(struct rnbd_clt_dev *dev,
dev->max_hw_sectors = sess->max_io_size / SECTOR_SIZE;
dev->max_segments = BMAX_SEGMENTS;
- dev->max_hw_sectors = min_t(u32, dev->max_hw_sectors,
- le32_to_cpu(rsp->max_hw_sectors));
- dev->max_segments = min_t(u16, dev->max_segments,
- le16_to_cpu(rsp->max_segments));
-
return 0;
}
@@ -427,7 +422,7 @@ enum wait_type {
};
static int send_usr_msg(struct rtrs_clt *rtrs, int dir,
- struct rnbd_iu *iu, struct kvec *vec, size_t nr,
+ struct rnbd_iu *iu, struct kvec *vec,
size_t len, struct scatterlist *sg, unsigned int sg_len,
void (*conf)(struct work_struct *work),
int *errno, enum wait_type wait)
@@ -441,7 +436,7 @@ static int send_usr_msg(struct rtrs_clt *rtrs, int dir,
.conf_fn = msg_conf,
};
err = rtrs_clt_request(dir, &req_ops, rtrs, iu->permit,
- vec, nr, len, sg, sg_len);
+ vec, 1, len, sg, sg_len);
if (!err && wait) {
wait_event(iu->comp.wait, iu->comp.errno != INT_MAX);
*errno = iu->comp.errno;
@@ -486,7 +481,7 @@ static int send_msg_close(struct rnbd_clt_dev *dev, u32 device_id, bool wait)
msg.device_id = cpu_to_le32(device_id);
WARN_ON(!rnbd_clt_get_dev(dev));
- err = send_usr_msg(sess->rtrs, WRITE, iu, &vec, 1, 0, NULL, 0,
+ err = send_usr_msg(sess->rtrs, WRITE, iu, &vec, 0, NULL, 0,
msg_close_conf, &errno, wait);
if (err) {
rnbd_clt_put_dev(dev);
@@ -575,7 +570,7 @@ static int send_msg_open(struct rnbd_clt_dev *dev, bool wait)
WARN_ON(!rnbd_clt_get_dev(dev));
err = send_usr_msg(sess->rtrs, READ, iu,
- &vec, 1, sizeof(*rsp), iu->sglist, 1,
+ &vec, sizeof(*rsp), iu->sglist, 1,
msg_open_conf, &errno, wait);
if (err) {
rnbd_clt_put_dev(dev);
@@ -629,7 +624,7 @@ static int send_msg_sess_info(struct rnbd_clt_session *sess, bool wait)
goto put_iu;
}
err = send_usr_msg(sess->rtrs, READ, iu,
- &vec, 1, sizeof(*rsp), iu->sglist, 1,
+ &vec, sizeof(*rsp), iu->sglist, 1,
msg_sess_info_conf, &errno, wait);
if (err) {
rnbd_clt_put_sess(sess);
@@ -1514,7 +1509,7 @@ struct rnbd_clt_dev *rnbd_clt_map_device(const char *sessname,
"map_device: Failed to configure device, err: %d\n",
ret);
mutex_unlock(&dev->lock);
- goto del_dev;
+ goto send_close;
}
rnbd_clt_info(dev,
@@ -1533,6 +1528,8 @@ struct rnbd_clt_dev *rnbd_clt_map_device(const char *sessname,
return dev;
+send_close:
+ send_msg_close(dev, dev->device_id, WAIT);
del_dev:
delete_dev(dev);
put_dev:
diff --git a/drivers/block/skd_main.c b/drivers/block/skd_main.c
index ae6454c..a962b45 100644
--- a/drivers/block/skd_main.c
+++ b/drivers/block/skd_main.c
@@ -25,7 +25,6 @@
#include <linux/dma-mapping.h>
#include <linux/completion.h>
#include <linux/scatterlist.h>
-#include <linux/version.h>
#include <linux/err.h>
#include <linux/aer.h>
#include <linux/wait.h>
diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
index 5e7c36d..f570556 100644
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -473,6 +473,12 @@ static void xen_vbd_free(struct xen_vbd *vbd)
vbd->bdev = NULL;
}
+/* Enable the persistent grants feature. */
+static bool feature_persistent = true;
+module_param(feature_persistent, bool, 0644);
+MODULE_PARM_DESC(feature_persistent,
+ "Enables the persistent grants feature");
+
static int xen_vbd_create(struct xen_blkif *blkif, blkif_vdev_t handle,
unsigned major, unsigned minor, int readonly,
int cdrom)
@@ -518,6 +524,8 @@ static int xen_vbd_create(struct xen_blkif *blkif, blkif_vdev_t handle,
if (q && blk_queue_secure_erase(q))
vbd->discard_secure = true;
+ vbd->feature_gnt_persistent = feature_persistent;
+
pr_debug("Successful creation of handle=%04x (dom=%u)\n",
handle, blkif->domid);
return 0;
@@ -905,7 +913,8 @@ static void connect(struct backend_info *be)
xen_blkbk_barrier(xbt, be, be->blkif->vbd.flush_support);
- err = xenbus_printf(xbt, dev->nodename, "feature-persistent", "%u", 1);
+ err = xenbus_printf(xbt, dev->nodename, "feature-persistent", "%u",
+ be->blkif->vbd.feature_gnt_persistent);
if (err) {
xenbus_dev_fatal(dev, err, "writing %s/feature-persistent",
dev->nodename);
@@ -1066,7 +1075,6 @@ static int connect_ring(struct backend_info *be)
{
struct xenbus_device *dev = be->dev;
struct xen_blkif *blkif = be->blkif;
- unsigned int pers_grants;
char protocol[64] = "";
int err, i;
char *xspath;
@@ -1092,9 +1100,11 @@ static int connect_ring(struct backend_info *be)
xenbus_dev_fatal(dev, err, "unknown fe protocol %s", protocol);
return -ENOSYS;
}
- pers_grants = xenbus_read_unsigned(dev->otherend, "feature-persistent",
- 0);
- blkif->vbd.feature_gnt_persistent = pers_grants;
+ if (blkif->vbd.feature_gnt_persistent)
+ blkif->vbd.feature_gnt_persistent =
+ xenbus_read_unsigned(dev->otherend,
+ "feature-persistent", 0);
+
blkif->vbd.overflow_max_grants = 0;
/*
@@ -1117,7 +1127,7 @@ static int connect_ring(struct backend_info *be)
pr_info("%s: using %d queues, protocol %d (%s) %s\n", dev->nodename,
blkif->nr_rings, blkif->blk_protocol, protocol,
- pers_grants ? "persistent grants" : "");
+ blkif->vbd.feature_gnt_persistent ? "persistent grants" : "");
ring_page_order = xenbus_read_unsigned(dev->otherend,
"ring-page-order", 0);
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 91de2e0..48629d34 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1866,8 +1866,8 @@ static int talk_to_blkback(struct xenbus_device *dev,
message = "writing protocol";
goto abort_transaction;
}
- err = xenbus_printf(xbt, dev->nodename,
- "feature-persistent", "%u", 1);
+ err = xenbus_printf(xbt, dev->nodename, "feature-persistent", "%u",
+ info->feature_persistent);
if (err)
dev_warn(&dev->dev,
"writing persistent grants feature to xenbus");
@@ -1941,6 +1941,13 @@ static int negotiate_mq(struct blkfront_info *info)
}
return 0;
}
+
+/* Enable the persistent grants feature. */
+static bool feature_persistent = true;
+module_param(feature_persistent, bool, 0644);
+MODULE_PARM_DESC(feature_persistent,
+ "Enables the persistent grants feature");
+
/**
* Entry point to this code when a new device is created. Allocate the basic
* structures and the ring buffer for communication with the backend, and
@@ -2007,6 +2014,8 @@ static int blkfront_probe(struct xenbus_device *dev,
info->vdevice = vdevice;
info->connected = BLKIF_STATE_DISCONNECTED;
+ info->feature_persistent = feature_persistent;
+
/* Front end dir is a number, which is used as the id. */
info->handle = simple_strtoul(strrchr(dev->nodename, '/')+1, NULL, 0);
dev_set_drvdata(&dev->dev, info);
@@ -2316,9 +2325,10 @@ static void blkfront_gather_backend_features(struct blkfront_info *info)
if (xenbus_read_unsigned(info->xbdev->otherend, "feature-discard", 0))
blkfront_setup_discard(info);
- info->feature_persistent =
- !!xenbus_read_unsigned(info->xbdev->otherend,
- "feature-persistent", 0);
+ if (info->feature_persistent)
+ info->feature_persistent =
+ !!xenbus_read_unsigned(info->xbdev->otherend,
+ "feature-persistent", 0);
indirect_segments = xenbus_read_unsigned(info->xbdev->otherend,
"feature-max-indirect-segments", 0);
diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index 029403c..1b69720 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -1218,10 +1218,11 @@ static void zram_free_page(struct zram *zram, size_t index)
static int __zram_bvec_read(struct zram *zram, struct page *page, u32 index,
struct bio *bio, bool partial_io)
{
- int ret;
+ struct zcomp_strm *zstrm;
unsigned long handle;
unsigned int size;
void *src, *dst;
+ int ret;
zram_slot_lock(zram, index);
if (zram_test_flag(zram, index, ZRAM_WB)) {
@@ -1252,6 +1253,9 @@ static int __zram_bvec_read(struct zram *zram, struct page *page, u32 index,
size = zram_get_obj_size(zram, index);
+ if (size != PAGE_SIZE)
+ zstrm = zcomp_stream_get(zram->comp);
+
src = zs_map_object(zram->mem_pool, handle, ZS_MM_RO);
if (size == PAGE_SIZE) {
dst = kmap_atomic(page);
@@ -1259,8 +1263,6 @@ static int __zram_bvec_read(struct zram *zram, struct page *page, u32 index,
kunmap_atomic(dst);
ret = 0;
} else {
- struct zcomp_strm *zstrm = zcomp_stream_get(zram->comp);
-
dst = kmap_atomic(page);
ret = zcomp_decompress(zstrm, src, size, dst);
kunmap_atomic(dst);
diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
index ec1004c..7355fa2 100644
--- a/drivers/bus/brcmstb_gisb.c
+++ b/drivers/bus/brcmstb_gisb.c
@@ -30,8 +30,22 @@
#define ARB_ERR_CAP_STATUS_WRITE (1 << 1)
#define ARB_ERR_CAP_STATUS_VALID (1 << 0)
+#define ARB_BP_CAP_CLEAR (1 << 0)
+#define ARB_BP_CAP_STATUS_PROT_SHIFT 14
+#define ARB_BP_CAP_STATUS_TYPE (1 << 13)
+#define ARB_BP_CAP_STATUS_RSP_SHIFT 10
+#define ARB_BP_CAP_STATUS_MASK GENMASK(1, 0)
+#define ARB_BP_CAP_STATUS_BS_SHIFT 2
+#define ARB_BP_CAP_STATUS_WRITE (1 << 1)
+#define ARB_BP_CAP_STATUS_VALID (1 << 0)
+
enum {
ARB_TIMER,
+ ARB_BP_CAP_CLR,
+ ARB_BP_CAP_HI_ADDR,
+ ARB_BP_CAP_ADDR,
+ ARB_BP_CAP_STATUS,
+ ARB_BP_CAP_MASTER,
ARB_ERR_CAP_CLR,
ARB_ERR_CAP_HI_ADDR,
ARB_ERR_CAP_ADDR,
@@ -41,6 +55,11 @@ enum {
static const int gisb_offsets_bcm7038[] = {
[ARB_TIMER] = 0x00c,
+ [ARB_BP_CAP_CLR] = 0x014,
+ [ARB_BP_CAP_HI_ADDR] = -1,
+ [ARB_BP_CAP_ADDR] = 0x0b8,
+ [ARB_BP_CAP_STATUS] = 0x0c0,
+ [ARB_BP_CAP_MASTER] = -1,
[ARB_ERR_CAP_CLR] = 0x0c4,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x0c8,
@@ -50,6 +69,11 @@ static const int gisb_offsets_bcm7038[] = {
static const int gisb_offsets_bcm7278[] = {
[ARB_TIMER] = 0x008,
+ [ARB_BP_CAP_CLR] = 0x01c,
+ [ARB_BP_CAP_HI_ADDR] = -1,
+ [ARB_BP_CAP_ADDR] = 0x220,
+ [ARB_BP_CAP_STATUS] = 0x230,
+ [ARB_BP_CAP_MASTER] = 0x234,
[ARB_ERR_CAP_CLR] = 0x7f8,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x7e0,
@@ -59,6 +83,11 @@ static const int gisb_offsets_bcm7278[] = {
static const int gisb_offsets_bcm7400[] = {
[ARB_TIMER] = 0x00c,
+ [ARB_BP_CAP_CLR] = 0x014,
+ [ARB_BP_CAP_HI_ADDR] = -1,
+ [ARB_BP_CAP_ADDR] = 0x0b8,
+ [ARB_BP_CAP_STATUS] = 0x0c0,
+ [ARB_BP_CAP_MASTER] = 0x0c4,
[ARB_ERR_CAP_CLR] = 0x0c8,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x0cc,
@@ -68,6 +97,11 @@ static const int gisb_offsets_bcm7400[] = {
static const int gisb_offsets_bcm7435[] = {
[ARB_TIMER] = 0x00c,
+ [ARB_BP_CAP_CLR] = 0x014,
+ [ARB_BP_CAP_HI_ADDR] = -1,
+ [ARB_BP_CAP_ADDR] = 0x158,
+ [ARB_BP_CAP_STATUS] = 0x160,
+ [ARB_BP_CAP_MASTER] = 0x164,
[ARB_ERR_CAP_CLR] = 0x168,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x16c,
@@ -77,6 +111,11 @@ static const int gisb_offsets_bcm7435[] = {
static const int gisb_offsets_bcm7445[] = {
[ARB_TIMER] = 0x008,
+ [ARB_BP_CAP_CLR] = 0x010,
+ [ARB_BP_CAP_HI_ADDR] = -1,
+ [ARB_BP_CAP_ADDR] = 0x1d8,
+ [ARB_BP_CAP_STATUS] = 0x1e0,
+ [ARB_BP_CAP_MASTER] = 0x1e4,
[ARB_ERR_CAP_CLR] = 0x7e4,
[ARB_ERR_CAP_HI_ADDR] = 0x7e8,
[ARB_ERR_CAP_ADDR] = 0x7ec,
@@ -125,6 +164,16 @@ static u64 gisb_read_address(struct brcmstb_gisb_arb_device *gdev)
return value;
}
+static u64 gisb_read_bp_address(struct brcmstb_gisb_arb_device *gdev)
+{
+ u64 value;
+
+ value = gisb_read(gdev, ARB_BP_CAP_ADDR);
+ value |= (u64)gisb_read(gdev, ARB_BP_CAP_HI_ADDR) << 32;
+
+ return value;
+}
+
static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg)
{
int offset = gdev->gisb_offsets[reg];
@@ -210,8 +259,8 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
m_name = m_fmt;
}
- pr_crit("%s: %s at 0x%llx [%c %s], core: %s\n",
- __func__, reason, arb_addr,
+ pr_crit("GISB: %s at 0x%llx [%c %s], core: %s\n",
+ reason, arb_addr,
cap_status & ARB_ERR_CAP_STATUS_WRITE ? 'W' : 'R',
cap_status & ARB_ERR_CAP_STATUS_TIMEOUT ? "timeout" : "",
m_name);
@@ -259,6 +308,41 @@ static irqreturn_t brcmstb_gisb_tea_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static irqreturn_t brcmstb_gisb_bp_handler(int irq, void *dev_id)
+{
+ struct brcmstb_gisb_arb_device *gdev = dev_id;
+ const char *m_name;
+ u32 bp_status;
+ u64 arb_addr;
+ u32 master;
+ char m_fmt[11];
+
+ bp_status = gisb_read(gdev, ARB_BP_CAP_STATUS);
+
+ /* Invalid captured address, bail out */
+ if (!(bp_status & ARB_BP_CAP_STATUS_VALID))
+ return IRQ_HANDLED;
+
+ /* Read the address and master */
+ arb_addr = gisb_read_bp_address(gdev);
+ master = gisb_read(gdev, ARB_BP_CAP_MASTER);
+
+ m_name = brcmstb_gisb_master_to_str(gdev, master);
+ if (!m_name) {
+ snprintf(m_fmt, sizeof(m_fmt), "0x%08x", master);
+ m_name = m_fmt;
+ }
+
+ pr_crit("GISB: breakpoint at 0x%llx [%c], core: %s\n",
+ arb_addr, bp_status & ARB_BP_CAP_STATUS_WRITE ? 'W' : 'R',
+ m_name);
+
+ /* clear the GISB error */
+ gisb_write(gdev, ARB_ERR_CAP_CLEAR, ARB_ERR_CAP_CLR);
+
+ return IRQ_HANDLED;
+}
+
/*
* Dump out gisb errors on die or panic.
*/
@@ -317,13 +401,14 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
struct brcmstb_gisb_arb_device *gdev;
const struct of_device_id *of_id;
struct resource *r;
- int err, timeout_irq, tea_irq;
+ int err, timeout_irq, tea_irq, bp_irq;
unsigned int num_masters, j = 0;
int i, first, last;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
timeout_irq = platform_get_irq(pdev, 0);
tea_irq = platform_get_irq(pdev, 1);
+ bp_irq = platform_get_irq(pdev, 2);
gdev = devm_kzalloc(&pdev->dev, sizeof(*gdev), GFP_KERNEL);
if (!gdev)
@@ -356,6 +441,15 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
if (err < 0)
return err;
+ /* Interrupt is optional */
+ if (bp_irq > 0) {
+ err = devm_request_irq(&pdev->dev, bp_irq,
+ brcmstb_gisb_bp_handler, 0, pdev->name,
+ gdev);
+ if (err < 0)
+ return err;
+ }
+
/* If we do not have a valid mask, assume all masters are enabled */
if (of_property_read_u32(dn, "brcm,gisb-arb-master-mask",
&gdev->valid_mask))
diff --git a/drivers/char/random.c b/drivers/char/random.c
index d20ba1b..2a41b21 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1277,7 +1277,6 @@ void add_interrupt_randomness(int irq, int irq_flags)
fast_mix(fast_pool);
add_interrupt_bench(cycles);
- this_cpu_add(net_rand_state.s1, fast_pool->pool[cycles & 3]);
if (unlikely(crng_init == 0)) {
if ((fast_pool->count >= 64) &&
diff --git a/drivers/clk/imx/clk-imx27.c b/drivers/clk/imx/clk-imx27.c
index a375306..5585ded 100644
--- a/drivers/clk/imx/clk-imx27.c
+++ b/drivers/clk/imx/clk-imx27.c
@@ -181,79 +181,6 @@ static void __init _mx27_clocks_init(unsigned long fref)
imx_print_silicon_rev("i.MX27", mx27_revision());
}
-int __init mx27_clocks_init(unsigned long fref)
-{
- ccm = ioremap(MX27_CCM_BASE_ADDR, SZ_4K);
-
- _mx27_clocks_init(fref);
-
- clk_register_clkdev(clk[IMX27_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0");
- clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.0");
- clk_register_clkdev(clk[IMX27_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1");
- clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.1");
- clk_register_clkdev(clk[IMX27_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2");
- clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.2");
- clk_register_clkdev(clk[IMX27_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3");
- clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.3");
- clk_register_clkdev(clk[IMX27_CLK_UART5_IPG_GATE], "ipg", "imx21-uart.4");
- clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.4");
- clk_register_clkdev(clk[IMX27_CLK_UART6_IPG_GATE], "ipg", "imx21-uart.5");
- clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.5");
- clk_register_clkdev(clk[IMX27_CLK_GPT1_IPG_GATE], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx-gpt.0");
- clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.0");
- clk_register_clkdev(clk[IMX27_CLK_SDHC1_IPG_GATE], "ipg", "imx21-mmc.0");
- clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.1");
- clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.1");
- clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.2");
- clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.2");
- clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.0");
- clk_register_clkdev(clk[IMX27_CLK_CSPI1_IPG_GATE], "ipg", "imx27-cspi.0");
- clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.1");
- clk_register_clkdev(clk[IMX27_CLK_CSPI2_IPG_GATE], "ipg", "imx27-cspi.1");
- clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.2");
- clk_register_clkdev(clk[IMX27_CLK_CSPI3_IPG_GATE], "ipg", "imx27-cspi.2");
- clk_register_clkdev(clk[IMX27_CLK_PER3_GATE], "per", "imx21-fb.0");
- clk_register_clkdev(clk[IMX27_CLK_LCDC_IPG_GATE], "ipg", "imx21-fb.0");
- clk_register_clkdev(clk[IMX27_CLK_LCDC_AHB_GATE], "ahb", "imx21-fb.0");
- clk_register_clkdev(clk[IMX27_CLK_CSI_AHB_GATE], "ahb", "imx27-camera.0");
- clk_register_clkdev(clk[IMX27_CLK_PER4_GATE], "per", "imx27-camera.0");
- clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "imx-udc-mx27");
- clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "imx-udc-mx27");
- clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "imx-udc-mx27");
- clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.1");
- clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.1");
- clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.1");
- clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.2");
- clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.2");
- clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.2");
- clk_register_clkdev(clk[IMX27_CLK_SSI1_IPG_GATE], NULL, "imx-ssi.0");
- clk_register_clkdev(clk[IMX27_CLK_SSI2_IPG_GATE], NULL, "imx-ssi.1");
- clk_register_clkdev(clk[IMX27_CLK_NFC_BAUD_GATE], NULL, "imx27-nand.0");
- clk_register_clkdev(clk[IMX27_CLK_VPU_BAUD_GATE], "per", "coda-imx27.0");
- clk_register_clkdev(clk[IMX27_CLK_VPU_AHB_GATE], "ahb", "coda-imx27.0");
- clk_register_clkdev(clk[IMX27_CLK_DMA_AHB_GATE], "ahb", "imx27-dma");
- clk_register_clkdev(clk[IMX27_CLK_DMA_IPG_GATE], "ipg", "imx27-dma");
- clk_register_clkdev(clk[IMX27_CLK_FEC_IPG_GATE], "ipg", "imx27-fec.0");
- clk_register_clkdev(clk[IMX27_CLK_FEC_AHB_GATE], "ahb", "imx27-fec.0");
- clk_register_clkdev(clk[IMX27_CLK_WDOG_IPG_GATE], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[IMX27_CLK_I2C1_IPG_GATE], NULL, "imx21-i2c.0");
- clk_register_clkdev(clk[IMX27_CLK_I2C2_IPG_GATE], NULL, "imx21-i2c.1");
- clk_register_clkdev(clk[IMX27_CLK_OWIRE_IPG_GATE], NULL, "mxc_w1.0");
- clk_register_clkdev(clk[IMX27_CLK_KPP_IPG_GATE], NULL, "imx-keypad");
- clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "emma-ahb", "imx27-camera.0");
- clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "emma-ipg", "imx27-camera.0");
- clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "ahb", "m2m-emmaprp.0");
- clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "ipg", "m2m-emmaprp.0");
-
- mxc_timer_init(MX27_GPT1_BASE_ADDR, MX27_INT_GPT1, GPT_TYPE_IMX21);
-
- return 0;
-}
-
static void __init mx27_clocks_init_dt(struct device_node *np)
{
struct device_node *refnp;
diff --git a/drivers/clk/imx/clk-imx31.c b/drivers/clk/imx/clk-imx31.c
index 4bb05e4..7b13fb5 100644
--- a/drivers/clk/imx/clk-imx31.c
+++ b/drivers/clk/imx/clk-imx31.c
@@ -132,77 +132,6 @@ static void __init _mx31_clocks_init(void __iomem *base, unsigned long fref)
clk_disable_unprepare(clk[iim_gate]);
}
-int __init mx31_clocks_init(unsigned long fref)
-{
- void __iomem *base;
-
- base = ioremap(MX31_CCM_BASE_ADDR, SZ_4K);
- if (!base)
- panic("%s: failed to map registers\n", __func__);
-
- _mx31_clocks_init(base, fref);
-
- clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
- clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[cspi1_gate], NULL, "imx31-cspi.0");
- clk_register_clkdev(clk[cspi2_gate], NULL, "imx31-cspi.1");
- clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2");
- clk_register_clkdev(clk[pwm_gate], "pwm", NULL);
- clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[ckil], "ref", "imx21-rtc");
- clk_register_clkdev(clk[rtc_gate], "ipg", "imx21-rtc");
- clk_register_clkdev(clk[epit1_gate], "epit", NULL);
- clk_register_clkdev(clk[epit2_gate], "epit", NULL);
- clk_register_clkdev(clk[nfc], NULL, "imx27-nand.0");
- clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
- clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
- clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
- clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0");
- clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0");
- clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
- clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.1");
- clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.1");
- clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
- clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
- clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
- clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
- clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx27");
- clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx27");
- clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
- clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
- /* i.mx31 has the i.mx21 type uart */
- clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
- clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
- clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1");
- clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1");
- clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2");
- clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2");
- clk_register_clkdev(clk[uart4_gate], "per", "imx21-uart.3");
- clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.3");
- clk_register_clkdev(clk[uart5_gate], "per", "imx21-uart.4");
- clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.4");
- clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
- clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
- clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
- clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
- clk_register_clkdev(clk[sdhc1_gate], NULL, "imx31-mmc.0");
- clk_register_clkdev(clk[sdhc2_gate], NULL, "imx31-mmc.1");
- clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
- clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
- clk_register_clkdev(clk[firi_gate], "firi", NULL);
- clk_register_clkdev(clk[ata_gate], NULL, "pata_imx");
- clk_register_clkdev(clk[rtic_gate], "rtic", NULL);
- clk_register_clkdev(clk[rng_gate], NULL, "mxc_rnga");
- clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma");
- clk_register_clkdev(clk[iim_gate], "iim", NULL);
-
-
- imx_register_uart_clocks(uart_clks);
- mxc_timer_init(MX31_GPT1_BASE_ADDR, MX31_INT_GPT, GPT_TYPE_IMX31);
-
- return 0;
-}
-
static void __init mx31_clocks_init_dt(struct device_node *np)
{
struct device_node *osc_np;
diff --git a/drivers/clk/imx/clk-imx35.c b/drivers/clk/imx/clk-imx35.c
index e595f55..c1df036 100644
--- a/drivers/clk/imx/clk-imx35.c
+++ b/drivers/clk/imx/clk-imx35.c
@@ -248,74 +248,6 @@ static void __init _mx35_clocks_init(void)
imx_print_silicon_rev("i.MX35", mx35_revision());
}
-int __init mx35_clocks_init(void)
-{
- _mx35_clocks_init();
-
- clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
- clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
- clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
- clk_register_clkdev(clk[cspi1_gate], "per", "imx35-cspi.0");
- clk_register_clkdev(clk[cspi1_gate], "ipg", "imx35-cspi.0");
- clk_register_clkdev(clk[cspi2_gate], "per", "imx35-cspi.1");
- clk_register_clkdev(clk[cspi2_gate], "ipg", "imx35-cspi.1");
- clk_register_clkdev(clk[epit1_gate], NULL, "imx-epit.0");
- clk_register_clkdev(clk[epit2_gate], NULL, "imx-epit.1");
- clk_register_clkdev(clk[esdhc1_gate], "per", "sdhci-esdhc-imx35.0");
- clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.0");
- clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.0");
- clk_register_clkdev(clk[esdhc2_gate], "per", "sdhci-esdhc-imx35.1");
- clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.1");
- clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.1");
- clk_register_clkdev(clk[esdhc3_gate], "per", "sdhci-esdhc-imx35.2");
- clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.2");
- clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.2");
- /* i.mx35 has the i.mx27 type fec */
- clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
- clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
- clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
- clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
- clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
- clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
- clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
- clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
- clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1");
- clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
- clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
- clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
- /* i.mx35 has the i.mx21 type uart */
- clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
- clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
- clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1");
- clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1");
- clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2");
- clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2");
- /* i.mx35 has the i.mx21 type rtc */
- clk_register_clkdev(clk[ckil], "ref", "imx21-rtc");
- clk_register_clkdev(clk[rtc_gate], "ipg", "imx21-rtc");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
- clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
- clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.0");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
- clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
- clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.1");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
- clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
- clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
- clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
- clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
- clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27");
- clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
- clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
- clk_register_clkdev(clk[admux_gate], "audmux", NULL);
-
- mxc_timer_init(MX35_GPT1_BASE_ADDR, MX35_INT_GPT, GPT_TYPE_IMX31);
-
- return 0;
-}
-
static void __init mx35_clocks_init_dt(struct device_node *ccm_node)
{
_mx35_clocks_init();
diff --git a/drivers/clk/samsung/clk-s3c2410-dclk.c b/drivers/clk/samsung/clk-s3c2410-dclk.c
index 7dad909..f5e0a6b 100644
--- a/drivers/clk/samsung/clk-s3c2410-dclk.c
+++ b/drivers/clk/samsung/clk-s3c2410-dclk.c
@@ -11,13 +11,10 @@
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/clk-s3c2410.h>
#include <linux/module.h>
#include "clk.h"
-/* legacy access to misccr, until dt conversion is finished */
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-
#define MUX_DCLK0 0
#define MUX_DCLK1 1
#define DIV_DCLK0 2
@@ -52,6 +49,7 @@ struct s3c24xx_clkout {
struct clk_hw hw;
u32 mask;
u8 shift;
+ unsigned int (*modify_misccr)(unsigned int clr, unsigned int chg);
};
#define to_s3c24xx_clkout(_hw) container_of(_hw, struct s3c24xx_clkout, hw)
@@ -62,7 +60,7 @@ static u8 s3c24xx_clkout_get_parent(struct clk_hw *hw)
int num_parents = clk_hw_get_num_parents(hw);
u32 val;
- val = readl_relaxed(S3C24XX_MISCCR) >> clkout->shift;
+ val = clkout->modify_misccr(0, 0) >> clkout->shift;
val >>= clkout->shift;
val &= clkout->mask;
@@ -76,7 +74,7 @@ static int s3c24xx_clkout_set_parent(struct clk_hw *hw, u8 index)
{
struct s3c24xx_clkout *clkout = to_s3c24xx_clkout(hw);
- s3c2410_modify_misccr((clkout->mask << clkout->shift),
+ clkout->modify_misccr((clkout->mask << clkout->shift),
(index << clkout->shift));
return 0;
@@ -92,10 +90,14 @@ static struct clk_hw *s3c24xx_register_clkout(struct device *dev,
const char *name, const char **parent_names, u8 num_parents,
u8 shift, u32 mask)
{
+ struct s3c2410_clk_platform_data *pdata = dev_get_platdata(dev);
struct s3c24xx_clkout *clkout;
struct clk_init_data init;
int ret;
+ if (!pdata)
+ return ERR_PTR(-EINVAL);
+
/* allocate the clkout */
clkout = kzalloc(sizeof(*clkout), GFP_KERNEL);
if (!clkout)
@@ -110,6 +112,7 @@ static struct clk_hw *s3c24xx_register_clkout(struct device *dev,
clkout->shift = shift;
clkout->mask = mask;
clkout->hw.init = &init;
+ clkout->modify_misccr = pdata->modify_misccr;
ret = clk_hw_register(dev, &clkout->hw);
if (ret)
diff --git a/drivers/clk/samsung/clk-s3c2410.c b/drivers/clk/samsung/clk-s3c2410.c
index fcf6764..5831d06 100644
--- a/drivers/clk/samsung/clk-s3c2410.c
+++ b/drivers/clk/samsung/clk-s3c2410.c
@@ -6,6 +6,7 @@
*/
#include <linux/clk-provider.h>
+#include <linux/clk/samsung.h>
#include <linux/of.h>
#include <linux/of_address.h>
diff --git a/drivers/clk/samsung/clk-s3c2412.c b/drivers/clk/samsung/clk-s3c2412.c
index a95ab5f..724ef64 100644
--- a/drivers/clk/samsung/clk-s3c2412.c
+++ b/drivers/clk/samsung/clk-s3c2412.c
@@ -6,6 +6,7 @@
*/
#include <linux/clk-provider.h>
+#include <linux/clk/samsung.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
diff --git a/drivers/clk/samsung/clk-s3c2443.c b/drivers/clk/samsung/clk-s3c2443.c
index c7aba1e..a827d63 100644
--- a/drivers/clk/samsung/clk-s3c2443.c
+++ b/drivers/clk/samsung/clk-s3c2443.c
@@ -6,6 +6,7 @@
*/
#include <linux/clk-provider.h>
+#include <linux/clk/samsung.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
diff --git a/drivers/clk/samsung/clk-s3c64xx.c b/drivers/clk/samsung/clk-s3c64xx.c
index b96d33e..56f95b6 100644
--- a/drivers/clk/samsung/clk-s3c64xx.c
+++ b/drivers/clk/samsung/clk-s3c64xx.c
@@ -7,6 +7,7 @@
#include <linux/slab.h>
#include <linux/clk-provider.h>
+#include <linux/clk/samsung.h>
#include <linux/of.h>
#include <linux/of_address.h>
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index bf5830e..015ec0c 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -196,7 +196,6 @@
config ARM_S3C2410_CPUFREQ
bool
depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410
- select S3C2410_CPUFREQ_UTILS
help
CPU Frequency scaling support for S3C2410
@@ -233,7 +232,6 @@
config ARM_S3C2440_CPUFREQ
bool "S3C2440/S3C2442 CPU Frequency scaling support"
depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442)
- select S3C2410_CPUFREQ_UTILS
default y
help
CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index e4ff681..1e4fbb0 100644
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -691,7 +691,8 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
cpumask_copy(policy->cpus, topology_core_cpumask(cpu));
}
- if (check_amd_hwpstate_cpu(cpu) && !acpi_pstate_strict) {
+ if (check_amd_hwpstate_cpu(cpu) && boot_cpu_data.x86 < 0x19 &&
+ !acpi_pstate_strict) {
cpumask_clear(policy->cpus);
cpumask_set_cpu(cpu, policy->cpus);
cpumask_copy(data->freqdomain_cpus,
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 1877f5e..f4b6066 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1454,14 +1454,13 @@ static int cpufreq_online(unsigned int cpu)
*/
if ((cpufreq_driver->flags & CPUFREQ_NEED_INITIAL_FREQ_CHECK)
&& has_target()) {
+ unsigned int old_freq = policy->cur;
+
/* Are we running at unknown frequency ? */
- ret = cpufreq_frequency_table_get_index(policy, policy->cur);
+ ret = cpufreq_frequency_table_get_index(policy, old_freq);
if (ret == -EINVAL) {
- /* Warn user and fix it */
- pr_warn("%s: CPU%d: Running at unlisted freq: %u KHz\n",
- __func__, policy->cpu, policy->cur);
- ret = __cpufreq_driver_target(policy, policy->cur - 1,
- CPUFREQ_RELATION_L);
+ ret = __cpufreq_driver_target(policy, old_freq - 1,
+ CPUFREQ_RELATION_L);
/*
* Reaching here after boot in a few seconds may not
@@ -1469,8 +1468,8 @@ static int cpufreq_online(unsigned int cpu)
* frequency for longer duration. Hence, a BUG_ON().
*/
BUG_ON(ret);
- pr_warn("%s: CPU%d: Unlisted initial frequency changed to: %u KHz\n",
- __func__, policy->cpu, policy->cur);
+ pr_info("%s: CPU%d: Running at unlisted initial frequency: %u KHz, changing to: %u KHz\n",
+ __func__, policy->cpu, old_freq, policy->cur);
}
}
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 9a515c4..3c14555 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -1420,6 +1420,24 @@ static void __init intel_pstate_sysfs_expose_params(void)
}
}
+static void __init intel_pstate_sysfs_remove(void)
+{
+ if (!intel_pstate_kobject)
+ return;
+
+ sysfs_remove_group(intel_pstate_kobject, &intel_pstate_attr_group);
+
+ if (!per_cpu_limits) {
+ sysfs_remove_file(intel_pstate_kobject, &max_perf_pct.attr);
+ sysfs_remove_file(intel_pstate_kobject, &min_perf_pct.attr);
+
+ if (x86_match_cpu(intel_pstate_cpu_ee_disable_ids))
+ sysfs_remove_file(intel_pstate_kobject, &energy_efficiency.attr);
+ }
+
+ kobject_put(intel_pstate_kobject);
+}
+
static void intel_pstate_sysfs_expose_hwp_dynamic_boost(void)
{
int rc;
@@ -3063,8 +3081,10 @@ static int __init intel_pstate_init(void)
mutex_lock(&intel_pstate_driver_lock);
rc = intel_pstate_register_driver(default_driver);
mutex_unlock(&intel_pstate_driver_lock);
- if (rc)
+ if (rc) {
+ intel_pstate_sysfs_remove();
return rc;
+ }
if (hwp_active) {
const struct x86_cpu_id *id;
diff --git a/drivers/cpufreq/s3c2410-cpufreq.c b/drivers/cpufreq/s3c2410-cpufreq.c
index 0c4f2cc..5dcfbf0 100644
--- a/drivers/cpufreq/s3c2410-cpufreq.c
+++ b/drivers/cpufreq/s3c2410-cpufreq.c
@@ -16,14 +16,14 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+#include <linux/soc/samsung/s3c-pm.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
+#define S3C2410_CLKDIVN_PDIVN (1<<0)
+#define S3C2410_CLKDIVN_HDIVN (1<<1)
/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
@@ -37,7 +37,7 @@ static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
if (cfg->divs.p_divisor != cfg->divs.h_divisor)
clkdiv |= S3C2410_CLKDIVN_PDIVN;
- __raw_writel(clkdiv, S3C2410_CLKDIVN);
+ s3c24xx_write_clkdivn(clkdiv);
}
static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
diff --git a/drivers/cpufreq/s3c2412-cpufreq.c b/drivers/cpufreq/s3c2412-cpufreq.c
index 53385a9..5945945 100644
--- a/drivers/cpufreq/s3c2412-cpufreq.c
+++ b/drivers/cpufreq/s3c2412-cpufreq.c
@@ -19,15 +19,24 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+#include <linux/soc/samsung/s3c-pm.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/s3c2412.h>
-
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
+#define S3C2412_CLKDIVN_PDIVN (1<<2)
+#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0)
+#define S3C2412_CLKDIVN_ARMDIVN (1<<3)
+#define S3C2412_CLKDIVN_DVSEN (1<<4)
+#define S3C2412_CLKDIVN_HALFHCLK (1<<5)
+#define S3C2412_CLKDIVN_USB48DIV (1<<6)
+#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8)
+#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8)
+#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12)
+#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12)
+#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16)
+#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16)
/* our clock resources. */
static struct clk *xtal;
@@ -117,7 +126,7 @@ static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
unsigned long clkdiv;
unsigned long olddiv;
- olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
+ olddiv = clkdiv = s3c24xx_read_clkdivn();
/* clear off current clock info */
@@ -134,32 +143,11 @@ static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
clkdiv |= S3C2412_CLKDIVN_PDIVN;
s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
- __raw_writel(clkdiv, S3C2410_CLKDIVN);
+ s3c24xx_write_clkdivn(clkdiv);
clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
}
-static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
-{
- struct s3c_cpufreq_board *board = cfg->board;
- unsigned long refresh;
-
- s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
- board->refresh, cfg->freq.hclk);
-
- /* Reduce both the refresh time (in ns) and the frequency (in MHz)
- * by 10 each to ensure that we do not overflow 32 bit numbers. This
- * should work for HCLK up to 133MHz and refresh period up to 30usec.
- */
-
- refresh = (board->refresh / 10);
- refresh *= (cfg->freq.hclk / 100);
- refresh /= (1 * 1000 * 1000); /* 10^6 */
-
- s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
- __raw_writel(refresh, S3C2412_REFRESH);
-}
-
/* set the default cpu frequency information, based on an 200MHz part
* as we have no other way of detecting the speed rating in software.
*/
diff --git a/drivers/cpufreq/s3c2440-cpufreq.c b/drivers/cpufreq/s3c2440-cpufreq.c
index 3f772ba..148e8ae 100644
--- a/drivers/cpufreq/s3c2440-cpufreq.c
+++ b/drivers/cpufreq/s3c2440-cpufreq.c
@@ -20,14 +20,27 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+#include <linux/soc/samsung/s3c-pm.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/regs-clock.h>
+#define S3C2440_CLKDIVN_PDIVN (1<<0)
+#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1)
+#define S3C2440_CLKDIVN_HDIVN_1 (0<<1)
+#define S3C2440_CLKDIVN_HDIVN_2 (1<<1)
+#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1)
+#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1)
+#define S3C2440_CLKDIVN_UCLK (1<<3)
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
+#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0)
+#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4)
+#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8)
+#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9)
+#define S3C2440_CAMDIVN_DVSEN (1<<12)
+
+#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5)
static struct clk *xtal;
static struct clk *fclk;
@@ -143,8 +156,8 @@ static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
s3c_freq_dbg("%s: divisors: h=%d, p=%d\n", __func__,
cfg->divs.h_divisor, cfg->divs.p_divisor);
- clkdiv = __raw_readl(S3C2410_CLKDIVN);
- camdiv = __raw_readl(S3C2440_CAMDIVN);
+ clkdiv = s3c24xx_read_clkdivn();
+ camdiv = s3c2440_read_camdivn();
clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
camdiv &= ~CAMDIVN_HCLK_HALF;
@@ -184,11 +197,11 @@ static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
* then make a short delay and remove the hclk halving if necessary.
*/
- __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
- __raw_writel(clkdiv, S3C2410_CLKDIVN);
+ s3c2440_write_camdivn(camdiv | CAMDIVN_HCLK_HALF);
+ s3c24xx_write_clkdivn(clkdiv);
ndelay(20);
- __raw_writel(camdiv, S3C2440_CAMDIVN);
+ s3c2440_write_camdivn(camdiv);
clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
}
diff --git a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
index 290e353..93971df 100644
--- a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
+++ b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
@@ -18,7 +18,7 @@
#include <linux/seq_file.h>
#include <linux/err.h>
-#include <plat/cpu-freq-core.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
static struct dentry *dbgfs_root;
static struct dentry *dbgfs_file_io;
diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c
index ed0e713..37efc0d 100644
--- a/drivers/cpufreq/s3c24xx-cpufreq.c
+++ b/drivers/cpufreq/s3c24xx-cpufreq.c
@@ -21,17 +21,13 @@
#include <linux/device.h>
#include <linux/sysfs.h>
#include <linux/slab.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+#include <linux/soc/samsung/s3c-pm.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
-
-#include <mach/regs-clock.h>
-
/* note, cpufreq support deals in kHz, no Hz */
-
static struct cpufreq_driver s3c24xx_driver;
static struct s3c_cpufreq_config cpu_cur;
static struct s3c_iotimings s3c24xx_iotiming;
@@ -68,7 +64,7 @@ static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
- cfg->pll.driver_data = __raw_readl(S3C2410_MPLLCON);
+ cfg->pll.driver_data = s3c24xx_read_mpllcon();
cfg->pll.frequency = fclk;
cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
@@ -386,7 +382,7 @@ static unsigned int suspend_freq;
static int s3c_cpufreq_suspend(struct cpufreq_policy *policy)
{
suspend_pll.frequency = clk_get_rate(_clk_mpll);
- suspend_pll.driver_data = __raw_readl(S3C2410_MPLLCON);
+ suspend_pll.driver_data = s3c24xx_read_mpllcon();
suspend_freq = clk_get_rate(clk_arm);
return 0;
@@ -547,7 +543,7 @@ static void s3c_cpufreq_update_loctkime(void)
val |= calc_locktime(rate, cpu_cur.info->locktime_m);
pr_info("%s: new locktime is 0x%08x\n", __func__, val);
- __raw_writel(val, S3C2410_LOCKTIME);
+ s3c24xx_write_locktime(val);
}
static int s3c_cpufreq_build_freq(void)
diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c
index 6dd1311..e855e86 100644
--- a/drivers/cpufreq/scmi-cpufreq.c
+++ b/drivers/cpufreq/scmi-cpufreq.c
@@ -29,7 +29,7 @@ static const struct scmi_handle *handle;
static unsigned int scmi_cpufreq_get_rate(unsigned int cpu)
{
struct cpufreq_policy *policy = cpufreq_cpu_get_raw(cpu);
- struct scmi_perf_ops *perf_ops = handle->perf_ops;
+ const struct scmi_perf_ops *perf_ops = handle->perf_ops;
struct scmi_data *priv = policy->driver_data;
unsigned long rate;
int ret;
@@ -49,7 +49,7 @@ static int
scmi_cpufreq_set_target(struct cpufreq_policy *policy, unsigned int index)
{
struct scmi_data *priv = policy->driver_data;
- struct scmi_perf_ops *perf_ops = handle->perf_ops;
+ const struct scmi_perf_ops *perf_ops = handle->perf_ops;
u64 freq = policy->freq_table[index].frequency;
return perf_ops->freq_set(handle, priv->domain_id, freq * 1000, false);
@@ -59,7 +59,7 @@ static unsigned int scmi_cpufreq_fast_switch(struct cpufreq_policy *policy,
unsigned int target_freq)
{
struct scmi_data *priv = policy->driver_data;
- struct scmi_perf_ops *perf_ops = handle->perf_ops;
+ const struct scmi_perf_ops *perf_ops = handle->perf_ops;
if (!perf_ops->freq_set(handle, priv->domain_id,
target_freq * 1000, true))
diff --git a/drivers/dma/ti/k3-udma-glue.c b/drivers/dma/ti/k3-udma-glue.c
index 42c8ad10d..a367584 100644
--- a/drivers/dma/ti/k3-udma-glue.c
+++ b/drivers/dma/ti/k3-udma-glue.c
@@ -573,8 +573,8 @@ static int k3_udma_glue_cfg_rx_flow(struct k3_udma_glue_rx_channel *rx_chn,
/* request and cfg rings */
ret = k3_ringacc_request_rings_pair(rx_chn->common.ringacc,
- flow_cfg->ring_rxq_id,
flow_cfg->ring_rxfdq0_id,
+ flow_cfg->ring_rxq_id,
&flow->ringrxfdq,
&flow->ringrx);
if (ret) {
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index d78dd3c..3315e3c 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -7,7 +7,7 @@
menu "Firmware Drivers"
config ARM_SCMI_PROTOCOL
- bool "ARM System Control and Management Interface (SCMI) Message Protocol"
+ tristate "ARM System Control and Management Interface (SCMI) Message Protocol"
depends on ARM || ARM64 || COMPILE_TEST
depends on MAILBOX
help
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 99510be..5e013b6 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -22,7 +22,7 @@
obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o
obj-$(CONFIG_TURRIS_MOX_RWTM) += turris-mox-rwtm.o
-obj-$(CONFIG_ARM_SCMI_PROTOCOL) += arm_scmi/
+obj-y += arm_scmi/
obj-y += broadcom/
obj-y += meson/
obj-$(CONFIG_GOOGLE_FIRMWARE) += google/
diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
index 6f9cbc4..bc0d54f 100644
--- a/drivers/firmware/arm_scmi/Makefile
+++ b/drivers/firmware/arm_scmi/Makefile
@@ -1,9 +1,11 @@
# SPDX-License-Identifier: GPL-2.0-only
-obj-y = scmi-bus.o scmi-driver.o scmi-protocols.o scmi-transport.o
scmi-bus-y = bus.o
scmi-driver-y = driver.o notify.o
scmi-transport-y = shmem.o
scmi-transport-$(CONFIG_MAILBOX) += mailbox.o
scmi-transport-$(CONFIG_HAVE_ARM_SMCCC_DISCOVERY) += smc.o
-scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o
+scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o system.o
+scmi-module-objs := $(scmi-bus-y) $(scmi-driver-y) $(scmi-protocols-y) \
+ $(scmi-transport-y)
+obj-$(CONFIG_ARM_SCMI_PROTOCOL) += scmi-module.o
obj-$(CONFIG_ARM_SCMI_POWER_DOMAIN) += scmi_pm_domain.o
diff --git a/drivers/firmware/arm_scmi/bus.c b/drivers/firmware/arm_scmi/bus.c
index db55c43..1377ec7 100644
--- a/drivers/firmware/arm_scmi/bus.c
+++ b/drivers/firmware/arm_scmi/bus.c
@@ -230,7 +230,7 @@ static void scmi_devices_unregister(void)
bus_for_each_dev(&scmi_bus_type, NULL, NULL, __scmi_devices_unregister);
}
-static int __init scmi_bus_init(void)
+int __init scmi_bus_init(void)
{
int retval;
@@ -240,12 +240,10 @@ static int __init scmi_bus_init(void)
return retval;
}
-subsys_initcall(scmi_bus_init);
-static void __exit scmi_bus_exit(void)
+void __exit scmi_bus_exit(void)
{
scmi_devices_unregister();
bus_unregister(&scmi_bus_type);
ida_destroy(&scmi_bus_id);
}
-module_exit(scmi_bus_exit);
diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c
index 75e3988..c1cfe3e 100644
--- a/drivers/firmware/arm_scmi/clock.c
+++ b/drivers/firmware/arm_scmi/clock.c
@@ -318,7 +318,7 @@ scmi_clock_info_get(const struct scmi_handle *handle, u32 clk_id)
return clk;
}
-static struct scmi_clk_ops clk_ops = {
+static const struct scmi_clk_ops clk_ops = {
.count_get = scmi_clock_count_get,
.info_get = scmi_clock_info_get,
.rate_get = scmi_clock_rate_get,
@@ -364,9 +364,4 @@ static int scmi_clock_protocol_init(struct scmi_handle *handle)
return 0;
}
-static int __init scmi_clock_init(void)
-{
- return scmi_protocol_register(SCMI_PROTOCOL_CLOCK,
- &scmi_clock_protocol_init);
-}
-subsys_initcall(scmi_clock_init);
+DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(SCMI_PROTOCOL_CLOCK, clock)
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index c113e57..37fb583 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -156,6 +156,30 @@ void scmi_setup_protocol_implemented(const struct scmi_handle *handle,
int scmi_base_protocol_init(struct scmi_handle *h);
+int __init scmi_bus_init(void);
+void __exit scmi_bus_exit(void);
+
+#define DECLARE_SCMI_REGISTER_UNREGISTER(func) \
+ int __init scmi_##func##_register(void); \
+ void __exit scmi_##func##_unregister(void)
+DECLARE_SCMI_REGISTER_UNREGISTER(clock);
+DECLARE_SCMI_REGISTER_UNREGISTER(perf);
+DECLARE_SCMI_REGISTER_UNREGISTER(power);
+DECLARE_SCMI_REGISTER_UNREGISTER(reset);
+DECLARE_SCMI_REGISTER_UNREGISTER(sensors);
+DECLARE_SCMI_REGISTER_UNREGISTER(system);
+
+#define DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(id, name) \
+int __init scmi_##name##_register(void) \
+{ \
+ return scmi_protocol_register((id), &scmi_##name##_protocol_init); \
+} \
+\
+void __exit scmi_##name##_unregister(void) \
+{ \
+ scmi_protocol_unregister((id)); \
+}
+
/* SCMI Transport */
/**
* struct scmi_chan_info - Structure representing a SCMI channel information
@@ -210,7 +234,7 @@ struct scmi_transport_ops {
* @max_msg_size: Maximum size of data per message that can be handled.
*/
struct scmi_desc {
- struct scmi_transport_ops *ops;
+ const struct scmi_transport_ops *ops;
int max_rx_timeout_ms;
int max_msg;
int max_msg_size;
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 03ec742..c5dea87 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -730,6 +730,7 @@ struct scmi_prot_devnames {
static struct scmi_prot_devnames devnames[] = {
{ SCMI_PROTOCOL_POWER, { "genpd" },},
+ { SCMI_PROTOCOL_SYSTEM, { "syspower" },},
{ SCMI_PROTOCOL_PERF, { "cpufreq" },},
{ SCMI_PROTOCOL_CLOCK, { "clocks" },},
{ SCMI_PROTOCOL_SENSOR, { "hwmon" },},
@@ -928,7 +929,35 @@ static struct platform_driver scmi_driver = {
.remove = scmi_remove,
};
-module_platform_driver(scmi_driver);
+static int __init scmi_driver_init(void)
+{
+ scmi_bus_init();
+
+ scmi_clock_register();
+ scmi_perf_register();
+ scmi_power_register();
+ scmi_reset_register();
+ scmi_sensors_register();
+ scmi_system_register();
+
+ return platform_driver_register(&scmi_driver);
+}
+subsys_initcall(scmi_driver_init);
+
+static void __exit scmi_driver_exit(void)
+{
+ scmi_bus_exit();
+
+ scmi_clock_unregister();
+ scmi_perf_unregister();
+ scmi_power_unregister();
+ scmi_reset_unregister();
+ scmi_sensors_unregister();
+ scmi_system_unregister();
+
+ platform_driver_unregister(&scmi_driver);
+}
+module_exit(scmi_driver_exit);
MODULE_ALIAS("platform: arm-scmi");
MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
diff --git a/drivers/firmware/arm_scmi/mailbox.c b/drivers/firmware/arm_scmi/mailbox.c
index 6998dc8..4626404 100644
--- a/drivers/firmware/arm_scmi/mailbox.c
+++ b/drivers/firmware/arm_scmi/mailbox.c
@@ -110,7 +110,7 @@ static int mailbox_chan_free(int id, void *p, void *data)
struct scmi_chan_info *cinfo = p;
struct scmi_mailbox *smbox = cinfo->transport_info;
- if (!IS_ERR(smbox->chan)) {
+ if (smbox && !IS_ERR(smbox->chan)) {
mbox_free_channel(smbox->chan);
cinfo->transport_info = NULL;
smbox->chan = NULL;
@@ -181,7 +181,7 @@ mailbox_poll_done(struct scmi_chan_info *cinfo, struct scmi_xfer *xfer)
return shmem_poll_done(smbox->shmem, xfer);
}
-static struct scmi_transport_ops scmi_mailbox_ops = {
+static const struct scmi_transport_ops scmi_mailbox_ops = {
.chan_available = mailbox_chan_available,
.chan_setup = mailbox_chan_setup,
.chan_free = mailbox_chan_free,
diff --git a/drivers/firmware/arm_scmi/notify.c b/drivers/firmware/arm_scmi/notify.c
index 4731daa..2754f9d 100644
--- a/drivers/firmware/arm_scmi/notify.c
+++ b/drivers/firmware/arm_scmi/notify.c
@@ -1421,7 +1421,7 @@ static void scmi_protocols_late_init(struct work_struct *work)
* notify_ops are attached to the handle so that can be accessed
* directly from an scmi_driver to register its own notifiers.
*/
-static struct scmi_notify_ops notify_ops = {
+static const struct scmi_notify_ops notify_ops = {
.register_event_notifier = scmi_register_notifier,
.unregister_event_notifier = scmi_unregister_notifier,
};
diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
index 3e1e870..ed475b40 100644
--- a/drivers/firmware/arm_scmi/perf.c
+++ b/drivers/firmware/arm_scmi/perf.c
@@ -748,7 +748,7 @@ static bool scmi_fast_switch_possible(const struct scmi_handle *handle,
return dom->fc_info && dom->fc_info->level_set_addr;
}
-static struct scmi_perf_ops perf_ops = {
+static const struct scmi_perf_ops perf_ops = {
.limits_set = scmi_perf_limits_set,
.limits_get = scmi_perf_limits_get,
.level_set = scmi_perf_level_set,
@@ -890,9 +890,4 @@ static int scmi_perf_protocol_init(struct scmi_handle *handle)
return 0;
}
-static int __init scmi_perf_init(void)
-{
- return scmi_protocol_register(SCMI_PROTOCOL_PERF,
- &scmi_perf_protocol_init);
-}
-subsys_initcall(scmi_perf_init);
+DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(SCMI_PROTOCOL_PERF, perf)
diff --git a/drivers/firmware/arm_scmi/power.c b/drivers/firmware/arm_scmi/power.c
index 46f2136..1f37258e 100644
--- a/drivers/firmware/arm_scmi/power.c
+++ b/drivers/firmware/arm_scmi/power.c
@@ -184,7 +184,7 @@ static char *scmi_power_name_get(const struct scmi_handle *handle, u32 domain)
return dom->name;
}
-static struct scmi_power_ops power_ops = {
+static const struct scmi_power_ops power_ops = {
.num_domains_get = scmi_power_num_domains_get,
.name_get = scmi_power_name_get,
.state_set = scmi_power_state_set,
@@ -301,9 +301,4 @@ static int scmi_power_protocol_init(struct scmi_handle *handle)
return 0;
}
-static int __init scmi_power_init(void)
-{
- return scmi_protocol_register(SCMI_PROTOCOL_POWER,
- &scmi_power_protocol_init);
-}
-subsys_initcall(scmi_power_init);
+DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(SCMI_PROTOCOL_POWER, power)
diff --git a/drivers/firmware/arm_scmi/reset.c b/drivers/firmware/arm_scmi/reset.c
index 3691baf..f063cfe 100644
--- a/drivers/firmware/arm_scmi/reset.c
+++ b/drivers/firmware/arm_scmi/reset.c
@@ -194,7 +194,7 @@ scmi_reset_domain_deassert(const struct scmi_handle *handle, u32 domain)
return scmi_domain_reset(handle, domain, 0, ARCH_COLD_RESET);
}
-static struct scmi_reset_ops reset_ops = {
+static const struct scmi_reset_ops reset_ops = {
.num_domains_get = scmi_reset_num_domains_get,
.name_get = scmi_reset_name_get,
.latency_get = scmi_reset_latency_get,
@@ -313,9 +313,4 @@ static int scmi_reset_protocol_init(struct scmi_handle *handle)
return 0;
}
-static int __init scmi_reset_init(void)
-{
- return scmi_protocol_register(SCMI_PROTOCOL_RESET,
- &scmi_reset_protocol_init);
-}
-subsys_initcall(scmi_reset_init);
+DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(SCMI_PROTOCOL_RESET, reset)
diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
index 1af0ad3..9703cf6 100644
--- a/drivers/firmware/arm_scmi/sensors.c
+++ b/drivers/firmware/arm_scmi/sensors.c
@@ -275,7 +275,7 @@ static int scmi_sensor_count_get(const struct scmi_handle *handle)
return si->num_sensors;
}
-static struct scmi_sensor_ops sensor_ops = {
+static const struct scmi_sensor_ops sensor_ops = {
.count_get = scmi_sensor_count_get,
.info_get = scmi_sensor_info_get,
.trip_point_config = scmi_sensor_trip_point_config,
@@ -365,9 +365,4 @@ static int scmi_sensors_protocol_init(struct scmi_handle *handle)
return 0;
}
-static int __init scmi_sensors_init(void)
-{
- return scmi_protocol_register(SCMI_PROTOCOL_SENSOR,
- &scmi_sensors_protocol_init);
-}
-subsys_initcall(scmi_sensors_init);
+DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(SCMI_PROTOCOL_SENSOR, sensors)
diff --git a/drivers/firmware/arm_scmi/smc.c b/drivers/firmware/arm_scmi/smc.c
index a1537d1..1a03c3e 100644
--- a/drivers/firmware/arm_scmi/smc.c
+++ b/drivers/firmware/arm_scmi/smc.c
@@ -137,7 +137,7 @@ smc_poll_done(struct scmi_chan_info *cinfo, struct scmi_xfer *xfer)
return shmem_poll_done(scmi_info->shmem, xfer);
}
-static struct scmi_transport_ops scmi_smc_ops = {
+static const struct scmi_transport_ops scmi_smc_ops = {
.chan_available = smc_chan_available,
.chan_setup = smc_chan_setup,
.chan_free = smc_chan_free,
diff --git a/drivers/firmware/arm_scmi/system.c b/drivers/firmware/arm_scmi/system.c
new file mode 100644
index 0000000..283e12d
--- /dev/null
+++ b/drivers/firmware/arm_scmi/system.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) System Power Protocol
+ *
+ * Copyright (C) 2020 ARM Ltd.
+ */
+
+#define pr_fmt(fmt) "SCMI Notifications SYSTEM - " fmt
+
+#include <linux/scmi_protocol.h>
+
+#include "common.h"
+#include "notify.h"
+
+#define SCMI_SYSTEM_NUM_SOURCES 1
+
+enum scmi_system_protocol_cmd {
+ SYSTEM_POWER_STATE_NOTIFY = 0x5,
+};
+
+struct scmi_system_power_state_notify {
+ __le32 notify_enable;
+};
+
+struct scmi_system_power_state_notifier_payld {
+ __le32 agent_id;
+ __le32 flags;
+ __le32 system_state;
+};
+
+struct scmi_system_info {
+ u32 version;
+};
+
+static int scmi_system_request_notify(const struct scmi_handle *handle,
+ bool enable)
+{
+ int ret;
+ struct scmi_xfer *t;
+ struct scmi_system_power_state_notify *notify;
+
+ ret = scmi_xfer_get_init(handle, SYSTEM_POWER_STATE_NOTIFY,
+ SCMI_PROTOCOL_SYSTEM, sizeof(*notify), 0, &t);
+ if (ret)
+ return ret;
+
+ notify = t->tx.buf;
+ notify->notify_enable = enable ? cpu_to_le32(BIT(0)) : 0;
+
+ ret = scmi_do_xfer(handle, t);
+
+ scmi_xfer_put(handle, t);
+ return ret;
+}
+
+static int scmi_system_set_notify_enabled(const struct scmi_handle *handle,
+ u8 evt_id, u32 src_id, bool enable)
+{
+ int ret;
+
+ ret = scmi_system_request_notify(handle, enable);
+ if (ret)
+ pr_debug("FAIL_ENABLE - evt[%X] - ret:%d\n", evt_id, ret);
+
+ return ret;
+}
+
+static void *scmi_system_fill_custom_report(const struct scmi_handle *handle,
+ u8 evt_id, ktime_t timestamp,
+ const void *payld, size_t payld_sz,
+ void *report, u32 *src_id)
+{
+ const struct scmi_system_power_state_notifier_payld *p = payld;
+ struct scmi_system_power_state_notifier_report *r = report;
+
+ if (evt_id != SCMI_EVENT_SYSTEM_POWER_STATE_NOTIFIER ||
+ sizeof(*p) != payld_sz)
+ return NULL;
+
+ r->timestamp = timestamp;
+ r->agent_id = le32_to_cpu(p->agent_id);
+ r->flags = le32_to_cpu(p->flags);
+ r->system_state = le32_to_cpu(p->system_state);
+ *src_id = 0;
+
+ return r;
+}
+
+static const struct scmi_event system_events[] = {
+ {
+ .id = SCMI_EVENT_SYSTEM_POWER_STATE_NOTIFIER,
+ .max_payld_sz =
+ sizeof(struct scmi_system_power_state_notifier_payld),
+ .max_report_sz =
+ sizeof(struct scmi_system_power_state_notifier_report),
+ },
+};
+
+static const struct scmi_event_ops system_event_ops = {
+ .set_notify_enabled = scmi_system_set_notify_enabled,
+ .fill_custom_report = scmi_system_fill_custom_report,
+};
+
+static int scmi_system_protocol_init(struct scmi_handle *handle)
+{
+ u32 version;
+ struct scmi_system_info *pinfo;
+
+ scmi_version_get(handle, SCMI_PROTOCOL_SYSTEM, &version);
+
+ dev_dbg(handle->dev, "System Power Version %d.%d\n",
+ PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version));
+
+ pinfo = devm_kzalloc(handle->dev, sizeof(*pinfo), GFP_KERNEL);
+ if (!pinfo)
+ return -ENOMEM;
+
+ scmi_register_protocol_events(handle,
+ SCMI_PROTOCOL_SYSTEM, SCMI_PROTO_QUEUE_SZ,
+ &system_event_ops,
+ system_events,
+ ARRAY_SIZE(system_events),
+ SCMI_SYSTEM_NUM_SOURCES);
+
+ pinfo->version = version;
+ handle->system_priv = pinfo;
+
+ return 0;
+}
+
+DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(SCMI_PROTOCOL_SYSTEM, system)
diff --git a/drivers/firmware/imx/scu-pd.c b/drivers/firmware/imx/scu-pd.c
index af3d6d9..946eea2 100644
--- a/drivers/firmware/imx/scu-pd.c
+++ b/drivers/firmware/imx/scu-pd.c
@@ -46,6 +46,7 @@
#include <dt-bindings/firmware/imx/rsrc.h>
#include <linux/firmware/imx/sci.h>
+#include <linux/firmware/imx/svc/rm.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -256,6 +257,9 @@ imx_scu_add_pm_domain(struct device *dev, int idx,
struct imx_sc_pm_domain *sc_pd;
int ret;
+ if (!imx_sc_rm_is_resource_owned(pm_ipc_handle, pd_ranges->rsrc + idx))
+ return NULL;
+
sc_pd = devm_kzalloc(dev, sizeof(*sc_pd), GFP_KERNEL);
if (!sc_pd)
return ERR_PTR(-ENOMEM);
diff --git a/drivers/firmware/smccc/smccc.c b/drivers/firmware/smccc/smccc.c
index 4e80921..00c88b8 100644
--- a/drivers/firmware/smccc/smccc.c
+++ b/drivers/firmware/smccc/smccc.c
@@ -24,8 +24,10 @@ enum arm_smccc_conduit arm_smccc_1_1_get_conduit(void)
return smccc_conduit;
}
+EXPORT_SYMBOL_GPL(arm_smccc_1_1_get_conduit);
u32 arm_smccc_get_version(void)
{
return smccc_version;
}
+EXPORT_SYMBOL_GPL(arm_smccc_get_version);
diff --git a/drivers/firmware/tegra/bpmp.c b/drivers/firmware/tegra/bpmp.c
index 4d93d89..0742a90 100644
--- a/drivers/firmware/tegra/bpmp.c
+++ b/drivers/firmware/tegra/bpmp.c
@@ -856,7 +856,8 @@ static const struct tegra_bpmp_soc tegra210_soc = {
static const struct of_device_id tegra_bpmp_match[] = {
#if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC) || \
- IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC)
+ IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
+ IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC)
{ .compatible = "nvidia,tegra186-bpmp", .data = &tegra186_soc },
#endif
#if IS_ENABLED(CONFIG_ARCH_TEGRA_210_SOC)
diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index 722af9e..896f53e 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -1106,7 +1106,8 @@ static int ti_sci_cmd_get_clock(const struct ti_sci_handle *handle, u32 dev_id,
static int ti_sci_cmd_idle_clock(const struct ti_sci_handle *handle,
u32 dev_id, u32 clk_id)
{
- return ti_sci_set_clock_state(handle, dev_id, clk_id, 0,
+ return ti_sci_set_clock_state(handle, dev_id, clk_id,
+ MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE,
MSG_CLOCK_SW_STATE_UNREQ);
}
@@ -1125,7 +1126,8 @@ static int ti_sci_cmd_idle_clock(const struct ti_sci_handle *handle,
static int ti_sci_cmd_put_clock(const struct ti_sci_handle *handle,
u32 dev_id, u32 clk_id)
{
- return ti_sci_set_clock_state(handle, dev_id, clk_id, 0,
+ return ti_sci_set_clock_state(handle, dev_id, clk_id,
+ MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE,
MSG_CLOCK_SW_STATE_AUTO);
}
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index e8b4175..37da353 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -4625,7 +4625,7 @@ int amdgpu_device_gpu_recover(struct amdgpu_device *adev,
retry: /* Rest of adevs pre asic reset from XGMI hive. */
list_for_each_entry(tmp_adev, device_list_handle, gmc.xgmi.head) {
r = amdgpu_device_pre_asic_reset(tmp_adev,
- NULL,
+ (tmp_adev == adev) ? job : NULL,
&need_full_reset);
/*TODO Should we stop ?*/
if (r) {
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
index 18be544..96a9699 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
@@ -208,7 +208,8 @@ static int psp_sw_fini(void *handle)
adev->psp.ta_fw = NULL;
}
- if (adev->asic_type == CHIP_NAVI10)
+ if (adev->asic_type == CHIP_NAVI10 ||
+ adev->asic_type == CHIP_SIENNA_CICHLID)
psp_sysfs_fini(adev);
return 0;
@@ -1750,6 +1751,12 @@ static int psp_get_fw_type(struct amdgpu_firmware_info *ucode,
case AMDGPU_UCODE_ID_RLC_RESTORE_LIST_SRM_MEM:
*type = GFX_FW_TYPE_RLC_RESTORE_LIST_SRM_MEM;
break;
+ case AMDGPU_UCODE_ID_RLC_IRAM:
+ *type = GFX_FW_TYPE_RLC_IRAM;
+ break;
+ case AMDGPU_UCODE_ID_RLC_DRAM:
+ *type = GFX_FW_TYPE_RLC_DRAM_BOOT;
+ break;
case AMDGPU_UCODE_ID_SMC:
*type = GFX_FW_TYPE_SMU;
break;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
index 8bf6a7c..4e36551 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
@@ -1986,7 +1986,8 @@ static int amdgpu_ras_check_asic_type(struct amdgpu_device *adev)
{
if (adev->asic_type != CHIP_VEGA10 &&
adev->asic_type != CHIP_VEGA20 &&
- adev->asic_type != CHIP_ARCTURUS)
+ adev->asic_type != CHIP_ARCTURUS &&
+ adev->asic_type != CHIP_SIENNA_CICHLID)
return 1;
else
return 0;
@@ -2030,7 +2031,6 @@ static void amdgpu_ras_check_supported(struct amdgpu_device *adev,
*supported = amdgpu_ras_enable == 0 ?
0 : *hw_supported & amdgpu_ras_mask;
-
adev->ras_features = *supported;
}
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_rlc.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_rlc.h
index 60bb3e8..aeaaae7 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_rlc.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_rlc.h
@@ -168,12 +168,16 @@ struct amdgpu_rlc {
u32 save_restore_list_cntl_size_bytes;
u32 save_restore_list_gpm_size_bytes;
u32 save_restore_list_srm_size_bytes;
+ u32 rlc_iram_ucode_size_bytes;
+ u32 rlc_dram_ucode_size_bytes;
u32 *register_list_format;
u32 *register_restore;
u8 *save_restore_list_cntl;
u8 *save_restore_list_gpm;
u8 *save_restore_list_srm;
+ u8 *rlc_iram_ucode;
+ u8 *rlc_dram_ucode;
bool is_rlc_v2_1;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
index 55fe19a..b313ce4 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
@@ -500,6 +500,8 @@ static int amdgpu_ucode_init_single_fw(struct amdgpu_device *adev,
ucode->ucode_id != AMDGPU_UCODE_ID_RLC_RESTORE_LIST_CNTL &&
ucode->ucode_id != AMDGPU_UCODE_ID_RLC_RESTORE_LIST_GPM_MEM &&
ucode->ucode_id != AMDGPU_UCODE_ID_RLC_RESTORE_LIST_SRM_MEM &&
+ ucode->ucode_id != AMDGPU_UCODE_ID_RLC_IRAM &&
+ ucode->ucode_id != AMDGPU_UCODE_ID_RLC_DRAM &&
ucode->ucode_id != AMDGPU_UCODE_ID_DMCU_ERAM &&
ucode->ucode_id != AMDGPU_UCODE_ID_DMCU_INTV &&
ucode->ucode_id != AMDGPU_UCODE_ID_DMCUB)) {
@@ -556,6 +558,14 @@ static int amdgpu_ucode_init_single_fw(struct amdgpu_device *adev,
ucode->ucode_size = adev->gfx.rlc.save_restore_list_srm_size_bytes;
memcpy(ucode->kaddr, adev->gfx.rlc.save_restore_list_srm,
ucode->ucode_size);
+ } else if (ucode->ucode_id == AMDGPU_UCODE_ID_RLC_IRAM) {
+ ucode->ucode_size = adev->gfx.rlc.rlc_iram_ucode_size_bytes;
+ memcpy(ucode->kaddr, adev->gfx.rlc.rlc_iram_ucode,
+ ucode->ucode_size);
+ } else if (ucode->ucode_id == AMDGPU_UCODE_ID_RLC_DRAM) {
+ ucode->ucode_size = adev->gfx.rlc.rlc_dram_ucode_size_bytes;
+ memcpy(ucode->kaddr, adev->gfx.rlc.rlc_dram_ucode,
+ ucode->ucode_size);
} else if (ucode->ucode_id == AMDGPU_UCODE_ID_CP_MES) {
ucode->ucode_size = le32_to_cpu(mes_hdr->mes_ucode_size_bytes);
memcpy(ucode->kaddr, (void *)((uint8_t *)adev->mes.fw->data +
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.h
index 3c23c62..0e43b46 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.h
@@ -222,6 +222,15 @@ struct rlc_firmware_header_v2_1 {
uint32_t save_restore_list_srm_offset_bytes;
};
+/* version_major=2, version_minor=1 */
+struct rlc_firmware_header_v2_2 {
+ struct rlc_firmware_header_v2_1 v2_1;
+ uint32_t rlc_iram_ucode_size_bytes;
+ uint32_t rlc_iram_ucode_offset_bytes;
+ uint32_t rlc_dram_ucode_size_bytes;
+ uint32_t rlc_dram_ucode_offset_bytes;
+};
+
/* version_major=1, version_minor=0 */
struct sdma_firmware_header_v1_0 {
struct common_firmware_header header;
@@ -339,6 +348,8 @@ enum AMDGPU_UCODE_ID {
AMDGPU_UCODE_ID_RLC_RESTORE_LIST_CNTL,
AMDGPU_UCODE_ID_RLC_RESTORE_LIST_GPM_MEM,
AMDGPU_UCODE_ID_RLC_RESTORE_LIST_SRM_MEM,
+ AMDGPU_UCODE_ID_RLC_IRAM,
+ AMDGPU_UCODE_ID_RLC_DRAM,
AMDGPU_UCODE_ID_RLC_G,
AMDGPU_UCODE_ID_STORAGE,
AMDGPU_UCODE_ID_SMC,
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index 9792ec7..56fdbe6 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -112,6 +112,22 @@
#define mmCP_HYP_ME_UCODE_DATA 0x5817
#define mmCP_HYP_ME_UCODE_DATA_BASE_IDX 1
+//CC_GC_SA_UNIT_DISABLE
+#define mmCC_GC_SA_UNIT_DISABLE 0x0fe9
+#define mmCC_GC_SA_UNIT_DISABLE_BASE_IDX 0
+#define CC_GC_SA_UNIT_DISABLE__SA_DISABLE__SHIFT 0x8
+#define CC_GC_SA_UNIT_DISABLE__SA_DISABLE_MASK 0x0000FF00L
+//GC_USER_SA_UNIT_DISABLE
+#define mmGC_USER_SA_UNIT_DISABLE 0x0fea
+#define mmGC_USER_SA_UNIT_DISABLE_BASE_IDX 0
+#define GC_USER_SA_UNIT_DISABLE__SA_DISABLE__SHIFT 0x8
+#define GC_USER_SA_UNIT_DISABLE__SA_DISABLE_MASK 0x0000FF00L
+//PA_SC_ENHANCE_3
+#define mmPA_SC_ENHANCE_3 0x1085
+#define mmPA_SC_ENHANCE_3_BASE_IDX 0
+#define PA_SC_ENHANCE_3__FORCE_PBB_WORKLOAD_MODE_TO_ZERO__SHIFT 0x3
+#define PA_SC_ENHANCE_3__FORCE_PBB_WORKLOAD_MODE_TO_ZERO_MASK 0x00000008L
+
MODULE_FIRMWARE("amdgpu/navi10_ce.bin");
MODULE_FIRMWARE("amdgpu/navi10_pfp.bin");
MODULE_FIRMWARE("amdgpu/navi10_me.bin");
@@ -3091,6 +3107,7 @@ static const struct soc15_reg_golden golden_settings_gc_10_3[] =
SOC15_REG_GOLDEN_VALUE(GC, 0, mmGL2C_ADDR_MATCH_MASK, 0xffffffff, 0xffffffcf),
SOC15_REG_GOLDEN_VALUE(GC, 0, mmGL2C_CM_CTRL1, 0xff8fff0f, 0x580f1008),
SOC15_REG_GOLDEN_VALUE(GC, 0, mmGL2C_CTRL3, 0xf7ffffff, 0x10f80988),
+ SOC15_REG_GOLDEN_VALUE(GC, 0, mmLDS_CONFIG, 0x00000020, 0x00000020),
SOC15_REG_GOLDEN_VALUE(GC, 0, mmPA_CL_ENHANCE, 0xf17fffff, 0x01200007),
SOC15_REG_GOLDEN_VALUE(GC, 0, mmPA_SC_BINNER_TIMEOUT_COUNTER, 0xffffffff, 0x00000800),
SOC15_REG_GOLDEN_VALUE(GC, 0, mmPA_SC_ENHANCE_2, 0xffffffbf, 0x00000820),
@@ -3188,6 +3205,8 @@ static int gfx_v10_0_wait_for_rlc_autoload_complete(struct amdgpu_device *adev);
static void gfx_v10_0_ring_emit_ce_meta(struct amdgpu_ring *ring, bool resume);
static void gfx_v10_0_ring_emit_de_meta(struct amdgpu_ring *ring, bool resume);
static void gfx_v10_0_ring_emit_frame_cntl(struct amdgpu_ring *ring, bool start, bool secure);
+static u32 gfx_v10_3_get_disabled_sa(struct amdgpu_device *adev);
+static void gfx_v10_3_program_pbb_mode(struct amdgpu_device *adev);
static void gfx10_kiq_set_resources(struct amdgpu_ring *kiq_ring, uint64_t queue_mask)
{
@@ -3586,6 +3605,17 @@ static void gfx_v10_0_init_rlc_ext_microcode(struct amdgpu_device *adev)
le32_to_cpu(rlc_hdr->reg_list_format_direct_reg_list_length);
}
+static void gfx_v10_0_init_rlc_iram_dram_microcode(struct amdgpu_device *adev)
+{
+ const struct rlc_firmware_header_v2_2 *rlc_hdr;
+
+ rlc_hdr = (const struct rlc_firmware_header_v2_2 *)adev->gfx.rlc_fw->data;
+ adev->gfx.rlc.rlc_iram_ucode_size_bytes = le32_to_cpu(rlc_hdr->rlc_iram_ucode_size_bytes);
+ adev->gfx.rlc.rlc_iram_ucode = (u8 *)rlc_hdr + le32_to_cpu(rlc_hdr->rlc_iram_ucode_offset_bytes);
+ adev->gfx.rlc.rlc_dram_ucode_size_bytes = le32_to_cpu(rlc_hdr->rlc_dram_ucode_size_bytes);
+ adev->gfx.rlc.rlc_dram_ucode = (u8 *)rlc_hdr + le32_to_cpu(rlc_hdr->rlc_dram_ucode_offset_bytes);
+}
+
static bool gfx_v10_0_navi10_gfxoff_should_enable(struct amdgpu_device *adev)
{
bool ret = false;
@@ -3701,8 +3731,6 @@ static int gfx_v10_0_init_microcode(struct amdgpu_device *adev)
rlc_hdr = (const struct rlc_firmware_header_v2_0 *)adev->gfx.rlc_fw->data;
version_major = le16_to_cpu(rlc_hdr->header.header_version_major);
version_minor = le16_to_cpu(rlc_hdr->header.header_version_minor);
- if (version_major == 2 && version_minor == 1)
- adev->gfx.rlc.is_rlc_v2_1 = true;
adev->gfx.rlc_fw_version = le32_to_cpu(rlc_hdr->header.ucode_version);
adev->gfx.rlc_feature_version = le32_to_cpu(rlc_hdr->ucode_feature_version);
@@ -3744,8 +3772,12 @@ static int gfx_v10_0_init_microcode(struct amdgpu_device *adev)
for (i = 0 ; i < (rlc_hdr->reg_list_size_bytes >> 2); i++)
adev->gfx.rlc.register_restore[i] = le32_to_cpu(tmp[i]);
- if (adev->gfx.rlc.is_rlc_v2_1)
- gfx_v10_0_init_rlc_ext_microcode(adev);
+ if (version_major == 2) {
+ if (version_minor >= 1)
+ gfx_v10_0_init_rlc_ext_microcode(adev);
+ if (version_minor == 2)
+ gfx_v10_0_init_rlc_iram_dram_microcode(adev);
+ }
}
snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec%s.bin", chip_name, wks);
@@ -3806,8 +3838,7 @@ static int gfx_v10_0_init_microcode(struct amdgpu_device *adev)
adev->firmware.fw_size +=
ALIGN(le32_to_cpu(header->ucode_size_bytes), PAGE_SIZE);
}
- if (adev->gfx.rlc.is_rlc_v2_1 &&
- adev->gfx.rlc.save_restore_list_cntl_size_bytes &&
+ if (adev->gfx.rlc.save_restore_list_cntl_size_bytes &&
adev->gfx.rlc.save_restore_list_gpm_size_bytes &&
adev->gfx.rlc.save_restore_list_srm_size_bytes) {
info = &adev->firmware.ucode[AMDGPU_UCODE_ID_RLC_RESTORE_LIST_CNTL];
@@ -3827,6 +3858,21 @@ static int gfx_v10_0_init_microcode(struct amdgpu_device *adev)
info->fw = adev->gfx.rlc_fw;
adev->firmware.fw_size +=
ALIGN(adev->gfx.rlc.save_restore_list_srm_size_bytes, PAGE_SIZE);
+
+ if (adev->gfx.rlc.rlc_iram_ucode_size_bytes &&
+ adev->gfx.rlc.rlc_dram_ucode_size_bytes) {
+ info = &adev->firmware.ucode[AMDGPU_UCODE_ID_RLC_IRAM];
+ info->ucode_id = AMDGPU_UCODE_ID_RLC_IRAM;
+ info->fw = adev->gfx.rlc_fw;
+ adev->firmware.fw_size +=
+ ALIGN(adev->gfx.rlc.rlc_iram_ucode_size_bytes, PAGE_SIZE);
+
+ info = &adev->firmware.ucode[AMDGPU_UCODE_ID_RLC_DRAM];
+ info->ucode_id = AMDGPU_UCODE_ID_RLC_DRAM;
+ info->fw = adev->gfx.rlc_fw;
+ adev->firmware.fw_size +=
+ ALIGN(adev->gfx.rlc.rlc_dram_ucode_size_bytes, PAGE_SIZE);
+ }
}
info = &adev->firmware.ucode[AMDGPU_UCODE_ID_CP_MEC1];
@@ -4536,12 +4582,17 @@ static void gfx_v10_0_setup_rb(struct amdgpu_device *adev)
int i, j;
u32 data;
u32 active_rbs = 0;
+ u32 bitmap;
u32 rb_bitmap_width_per_sh = adev->gfx.config.max_backends_per_se /
adev->gfx.config.max_sh_per_se;
mutex_lock(&adev->grbm_idx_mutex);
for (i = 0; i < adev->gfx.config.max_shader_engines; i++) {
for (j = 0; j < adev->gfx.config.max_sh_per_se; j++) {
+ bitmap = i * adev->gfx.config.max_sh_per_se + j;
+ if ((adev->asic_type == CHIP_SIENNA_CICHLID) &&
+ ((gfx_v10_3_get_disabled_sa(adev) >> bitmap) & 1))
+ continue;
gfx_v10_0_select_se_sh(adev, i, j, 0xffffffff);
data = gfx_v10_0_get_rb_active_bitmap(adev);
active_rbs |= data << ((i * adev->gfx.config.max_sh_per_se + j) *
@@ -6950,6 +7001,9 @@ static int gfx_v10_0_hw_init(void *handle)
if (r)
return r;
+ if (adev->asic_type == CHIP_SIENNA_CICHLID)
+ gfx_v10_3_program_pbb_mode(adev);
+
return r;
}
@@ -8763,6 +8817,10 @@ static int gfx_v10_0_get_cu_info(struct amdgpu_device *adev,
mutex_lock(&adev->grbm_idx_mutex);
for (i = 0; i < adev->gfx.config.max_shader_engines; i++) {
for (j = 0; j < adev->gfx.config.max_sh_per_se; j++) {
+ bitmap = i * adev->gfx.config.max_sh_per_se + j;
+ if ((adev->asic_type == CHIP_SIENNA_CICHLID) &&
+ ((gfx_v10_3_get_disabled_sa(adev) >> bitmap) & 1))
+ continue;
mask = 1;
ao_bitmap = 0;
counter = 0;
@@ -8797,6 +8855,47 @@ static int gfx_v10_0_get_cu_info(struct amdgpu_device *adev,
return 0;
}
+static u32 gfx_v10_3_get_disabled_sa(struct amdgpu_device *adev)
+{
+ uint32_t efuse_setting, vbios_setting, disabled_sa, max_sa_mask;
+
+ efuse_setting = RREG32_SOC15(GC, 0, mmCC_GC_SA_UNIT_DISABLE);
+ efuse_setting &= CC_GC_SA_UNIT_DISABLE__SA_DISABLE_MASK;
+ efuse_setting >>= CC_GC_SA_UNIT_DISABLE__SA_DISABLE__SHIFT;
+
+ vbios_setting = RREG32_SOC15(GC, 0, mmGC_USER_SA_UNIT_DISABLE);
+ vbios_setting &= GC_USER_SA_UNIT_DISABLE__SA_DISABLE_MASK;
+ vbios_setting >>= GC_USER_SA_UNIT_DISABLE__SA_DISABLE__SHIFT;
+
+ max_sa_mask = amdgpu_gfx_create_bitmask(adev->gfx.config.max_sh_per_se *
+ adev->gfx.config.max_shader_engines);
+ disabled_sa = efuse_setting | vbios_setting;
+ disabled_sa &= max_sa_mask;
+
+ return disabled_sa;
+}
+
+static void gfx_v10_3_program_pbb_mode(struct amdgpu_device *adev)
+{
+ uint32_t max_sa_per_se, max_sa_per_se_mask, max_shader_engines;
+ uint32_t disabled_sa_mask, se_index, disabled_sa_per_se;
+
+ disabled_sa_mask = gfx_v10_3_get_disabled_sa(adev);
+
+ max_sa_per_se = adev->gfx.config.max_sh_per_se;
+ max_sa_per_se_mask = (1 << max_sa_per_se) - 1;
+ max_shader_engines = adev->gfx.config.max_shader_engines;
+
+ for (se_index = 0; max_shader_engines > se_index; se_index++) {
+ disabled_sa_per_se = disabled_sa_mask >> (se_index * max_sa_per_se);
+ disabled_sa_per_se &= max_sa_per_se_mask;
+ if (disabled_sa_per_se == max_sa_per_se_mask) {
+ WREG32_FIELD15(GC, 0, PA_SC_ENHANCE_3, FORCE_PBB_WORKLOAD_MODE_TO_ZERO, 1);
+ break;
+ }
+ }
+}
+
const struct amdgpu_ip_block_version gfx_v10_0_ip_block =
{
.type = AMD_IP_BLOCK_TYPE_GFX,
diff --git a/drivers/gpu/drm/amd/amdgpu/psp_gfx_if.h b/drivers/gpu/drm/amd/amdgpu/psp_gfx_if.h
index 1ef2f5b..4137dc7 100644
--- a/drivers/gpu/drm/amd/amdgpu/psp_gfx_if.h
+++ b/drivers/gpu/drm/amd/amdgpu/psp_gfx_if.h
@@ -201,7 +201,7 @@ enum psp_gfx_fw_type {
GFX_FW_TYPE_UVD1 = 23, /* UVD1 VG-20 */
GFX_FW_TYPE_TOC = 24, /* TOC NV-10 */
GFX_FW_TYPE_RLC_P = 25, /* RLC P NV */
- GFX_FW_TYPE_RLX6 = 26, /* RLX6 NV */
+ GFX_FW_TYPE_RLC_IRAM = 26, /* RLC_IRAM NV */
GFX_FW_TYPE_GLOBAL_TAP_DELAYS = 27, /* GLOBAL TAP DELAYS NV */
GFX_FW_TYPE_SE0_TAP_DELAYS = 28, /* SE0 TAP DELAYS NV */
GFX_FW_TYPE_SE1_TAP_DELAYS = 29, /* SE1 TAP DELAYS NV */
@@ -223,7 +223,7 @@ enum psp_gfx_fw_type {
GFX_FW_TYPE_ACCUM_CTRL_RAM = 45, /* ACCUM CTRL RAM NV */
GFX_FW_TYPE_RLCP_CAM = 46, /* RLCP CAM NV */
GFX_FW_TYPE_RLC_SPP_CAM_EXT = 47, /* RLC SPP CAM EXT NV */
- GFX_FW_TYPE_RLX6_DRAM_BOOT = 48, /* RLX6 DRAM BOOT NV */
+ GFX_FW_TYPE_RLC_DRAM_BOOT = 48, /* RLC DRAM BOOT NV */
GFX_FW_TYPE_VCN0_RAM = 49, /* VCN_RAM NV + RN */
GFX_FW_TYPE_VCN1_RAM = 50, /* VCN_RAM NV + RN */
GFX_FW_TYPE_DMUB = 51, /* DMUB RN */
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_v10.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_v10.c
index 72e4d61a..ad05933 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_v10.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_v10.c
@@ -58,8 +58,9 @@ static int update_qpd_v10(struct device_queue_manager *dqm,
/* check if sh_mem_config register already configured */
if (qpd->sh_mem_config == 0) {
qpd->sh_mem_config =
- SH_MEM_ALIGNMENT_MODE_UNALIGNED <<
- SH_MEM_CONFIG__ALIGNMENT_MODE__SHIFT;
+ (SH_MEM_ALIGNMENT_MODE_UNALIGNED <<
+ SH_MEM_CONFIG__ALIGNMENT_MODE__SHIFT) |
+ (3 << SH_MEM_CONFIG__INITIAL_INST_PREFETCH__SHIFT);
#if 0
/* TODO:
* This shouldn't be an issue with Navi10. Verify.
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index bb1bc7f..e2b23486 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -5063,7 +5063,13 @@ static void amdgpu_dm_connector_destroy(struct drm_connector *connector)
struct amdgpu_device *adev = drm_to_adev(connector->dev);
struct amdgpu_display_manager *dm = &adev->dm;
- drm_atomic_private_obj_fini(&aconnector->mst_mgr.base);
+ /*
+ * Call only if mst_mgr was iniitalized before since it's not done
+ * for all connector types.
+ */
+ if (aconnector->mst_mgr.dev)
+ drm_dp_mst_topology_mgr_destroy(&aconnector->mst_mgr);
+
#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) ||\
defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE)
diff --git a/drivers/gpu/drm/amd/pm/inc/smu_types.h b/drivers/gpu/drm/amd/pm/inc/smu_types.h
index 35fc46d..cbf4a58 100644
--- a/drivers/gpu/drm/amd/pm/inc/smu_types.h
+++ b/drivers/gpu/drm/amd/pm/inc/smu_types.h
@@ -220,6 +220,7 @@ enum smu_clk_type {
__SMU_DUMMY_MAP(DPM_MP0CLK), \
__SMU_DUMMY_MAP(DPM_LINK), \
__SMU_DUMMY_MAP(DPM_DCEFCLK), \
+ __SMU_DUMMY_MAP(DPM_XGMI), \
__SMU_DUMMY_MAP(DS_GFXCLK), \
__SMU_DUMMY_MAP(DS_SOCCLK), \
__SMU_DUMMY_MAP(DS_LCLK), \
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c
index c27806f..685a8a3 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c
@@ -151,14 +151,17 @@ static struct cmn2asic_mapping sienna_cichlid_feature_mask_map[SMU_FEATURE_COUNT
FEA_MAP(DPM_GFXCLK),
FEA_MAP(DPM_GFX_GPO),
FEA_MAP(DPM_UCLK),
+ FEA_MAP(DPM_FCLK),
FEA_MAP(DPM_SOCCLK),
FEA_MAP(DPM_MP0CLK),
FEA_MAP(DPM_LINK),
FEA_MAP(DPM_DCEFCLK),
+ FEA_MAP(DPM_XGMI),
FEA_MAP(MEM_VDDCI_SCALING),
FEA_MAP(MEM_MVDD_SCALING),
FEA_MAP(DS_GFXCLK),
FEA_MAP(DS_SOCCLK),
+ FEA_MAP(DS_FCLK),
FEA_MAP(DS_LCLK),
FEA_MAP(DS_DCEFCLK),
FEA_MAP(DS_UCLK),
@@ -452,6 +455,9 @@ static int sienna_cichlid_get_smu_metrics_data(struct smu_context *smu,
case METRICS_CURR_DCEFCLK:
*value = metrics->CurrClock[PPCLK_DCEFCLK];
break;
+ case METRICS_CURR_FCLK:
+ *value = metrics->CurrClock[PPCLK_FCLK];
+ break;
case METRICS_AVERAGE_GFXCLK:
if (metrics->AverageGfxActivity <= SMU_11_0_7_GFX_BUSY_THRESHOLD)
*value = metrics->AverageGfxclkFrequencyPostDs;
@@ -948,19 +954,23 @@ static int sienna_cichlid_print_clk_levels(struct smu_context *smu,
freq_values[1] = cur_value;
mark_index = cur_value == freq_values[0] ? 0 :
cur_value == freq_values[2] ? 2 : 1;
- if (mark_index != 1)
- freq_values[1] = (freq_values[0] + freq_values[2]) / 2;
- for (i = 0; i < 3; i++) {
+ count = 3;
+ if (mark_index != 1) {
+ count = 2;
+ freq_values[1] = freq_values[2];
+ }
+
+ for (i = 0; i < count; i++) {
size += sprintf(buf + size, "%d: %uMhz %s\n", i, freq_values[i],
- i == mark_index ? "*" : "");
+ cur_value == freq_values[i] ? "*" : "");
}
}
break;
case SMU_PCIE:
- gen_speed = smu_v11_0_get_current_pcie_link_speed(smu);
- lane_width = smu_v11_0_get_current_pcie_link_width(smu);
+ gen_speed = smu_v11_0_get_current_pcie_link_speed_level(smu);
+ lane_width = smu_v11_0_get_current_pcie_link_width_level(smu);
for (i = 0; i < NUM_LINK_LEVELS; i++)
size += sprintf(buf + size, "%d: %s %s %dMhz %s\n", i,
(dpm_context->dpm_tables.pcie_table.pcie_gen[i] == 0) ? "2.5GT/s," :
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu_cmn.c b/drivers/gpu/drm/amd/pm/swsmu/smu_cmn.c
index c30d333..92b2ea4 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu_cmn.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu_cmn.c
@@ -431,10 +431,9 @@ size_t smu_cmn_get_pp_feature_mask(struct smu_context *smu,
char *buf)
{
uint32_t feature_mask[2] = { 0 };
- int32_t feature_index = 0;
+ int feature_index = 0;
uint32_t count = 0;
- uint32_t sort_feature[SMU_FEATURE_COUNT];
- uint64_t hw_feature_count = 0;
+ int8_t sort_feature[SMU_FEATURE_COUNT];
size_t size = 0;
int ret = 0, i;
@@ -447,23 +446,31 @@ size_t smu_cmn_get_pp_feature_mask(struct smu_context *smu,
size = sprintf(buf + size, "features high: 0x%08x low: 0x%08x\n",
feature_mask[1], feature_mask[0]);
+ memset(sort_feature, -1, sizeof(sort_feature));
+
for (i = 0; i < SMU_FEATURE_COUNT; i++) {
feature_index = smu_cmn_to_asic_specific_index(smu,
CMN2ASIC_MAPPING_FEATURE,
i);
if (feature_index < 0)
continue;
+
sort_feature[feature_index] = i;
- hw_feature_count++;
}
- for (i = 0; i < hw_feature_count; i++) {
+ size += sprintf(buf + size, "%-2s. %-20s %-3s : %-s\n",
+ "No", "Feature", "Bit", "State");
+
+ for (i = 0; i < SMU_FEATURE_COUNT; i++) {
+ if (sort_feature[i] < 0)
+ continue;
+
size += sprintf(buf + size, "%02d. %-20s (%2d) : %s\n",
- count++,
- smu_get_feature_name(smu, sort_feature[i]),
- i,
- !!smu_cmn_feature_is_enabled(smu, sort_feature[i]) ?
- "enabled" : "disabled");
+ count++,
+ smu_get_feature_name(smu, sort_feature[i]),
+ i,
+ !!smu_cmn_feature_is_enabled(smu, sort_feature[i]) ?
+ "enabled" : "disabled");
}
return size;
diff --git a/drivers/gpu/drm/i915/Kconfig.debug b/drivers/gpu/drm/i915/Kconfig.debug
index 1cb28c2..25cd9788 100644
--- a/drivers/gpu/drm/i915/Kconfig.debug
+++ b/drivers/gpu/drm/i915/Kconfig.debug
@@ -153,6 +153,7 @@
select DRM_EXPORT_FOR_TESTS if m
select FAULT_INJECTION
select PRIME_NUMBERS
+ select CRC32
help
Choose this option to allow the driver to perform selftests upon
loading; also requires the i915.selftest=1 module parameter. To
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index a1fba7e..829b2a4 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -3434,6 +3434,14 @@ initial_plane_vma(struct drm_i915_private *i915,
if (IS_ERR(obj))
return NULL;
+ /*
+ * Mark it WT ahead of time to avoid changing the
+ * cache_level during fbdev initialization. The
+ * unbind there would get stuck waiting for rcu.
+ */
+ i915_gem_object_set_cache_coherency(obj, HAS_WT(i915) ?
+ I915_CACHE_WT : I915_CACHE_NONE);
+
switch (plane_config->tiling) {
case I915_TILING_NONE:
break;
diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
index acbd7eb..036f504 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
@@ -52,6 +52,25 @@ static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable)
}
}
+static bool intel_dp_aux_backlight_dpcd_mode(struct intel_connector *connector)
+{
+ struct intel_dp *intel_dp = intel_attached_dp(connector);
+ struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+ u8 mode_reg;
+
+ if (drm_dp_dpcd_readb(&intel_dp->aux,
+ DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
+ &mode_reg) != 1) {
+ drm_dbg_kms(&i915->drm,
+ "Failed to read the DPCD register 0x%x\n",
+ DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
+ return false;
+ }
+
+ return (mode_reg & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK) ==
+ DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD;
+}
+
/*
* Read the current backlight value from DPCD register(s) based
* on if 8-bit(MSB) or 16-bit(MSB and LSB) values are supported
@@ -61,24 +80,13 @@ static u32 intel_dp_aux_get_backlight(struct intel_connector *connector)
struct intel_dp *intel_dp = intel_attached_dp(connector);
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
u8 read_val[2] = { 0x0 };
- u8 mode_reg;
u16 level = 0;
- if (drm_dp_dpcd_readb(&intel_dp->aux,
- DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
- &mode_reg) != 1) {
- drm_dbg_kms(&i915->drm,
- "Failed to read the DPCD register 0x%x\n",
- DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
- return 0;
- }
-
/*
* If we're not in DPCD control mode yet, the programmed brightness
* value is meaningless and we should assume max brightness
*/
- if ((mode_reg & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK) !=
- DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD)
+ if (!intel_dp_aux_backlight_dpcd_mode(connector))
return connector->panel.backlight.max;
if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
@@ -319,7 +327,8 @@ static int intel_dp_aux_setup_backlight(struct intel_connector *connector,
panel->backlight.min = 0;
panel->backlight.level = intel_dp_aux_get_backlight(connector);
- panel->backlight.enabled = panel->backlight.level != 0;
+ panel->backlight.enabled = intel_dp_aux_backlight_dpcd_mode(connector) &&
+ panel->backlight.level != 0;
return 0;
}
diff --git a/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c
index 4b09bcd..1904e6e 100644
--- a/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c
@@ -287,8 +287,8 @@ struct i915_execbuffer {
u64 invalid_flags; /** Set of execobj.flags that are invalid */
u32 context_flags; /** Set of execobj.flags to insert from the ctx */
+ u64 batch_len; /** Length of batch within object */
u32 batch_start_offset; /** Location within object of batch */
- u32 batch_len; /** Length of batch within object */
u32 batch_flags; /** Flags composed for emit_bb_start() */
struct intel_gt_buffer_pool_node *batch_pool; /** pool node for batch buffer */
@@ -871,6 +871,10 @@ static int eb_lookup_vmas(struct i915_execbuffer *eb)
if (eb->batch_len == 0)
eb->batch_len = eb->batch->vma->size - eb->batch_start_offset;
+ if (unlikely(eb->batch_len == 0)) { /* impossible! */
+ drm_dbg(&i915->drm, "Invalid batch length\n");
+ return -EINVAL;
+ }
return 0;
@@ -2424,7 +2428,7 @@ static int eb_parse(struct i915_execbuffer *eb)
struct drm_i915_private *i915 = eb->i915;
struct intel_gt_buffer_pool_node *pool = eb->batch_pool;
struct i915_vma *shadow, *trampoline, *batch;
- unsigned int len;
+ unsigned long len;
int err;
if (!eb_use_cmdparser(eb)) {
@@ -2449,6 +2453,8 @@ static int eb_parse(struct i915_execbuffer *eb)
} else {
len += I915_CMD_PARSER_TRAMPOLINE_SIZE;
}
+ if (unlikely(len < eb->batch_len)) /* last paranoid check of overflow */
+ return -EINVAL;
if (!pool) {
pool = intel_gt_get_buffer_pool(eb->engine->gt, len);
diff --git a/drivers/gpu/drm/i915/gem/i915_gem_stolen.c b/drivers/gpu/drm/i915/gem/i915_gem_stolen.c
index 0be5e86..84b2707 100644
--- a/drivers/gpu/drm/i915/gem/i915_gem_stolen.c
+++ b/drivers/gpu/drm/i915/gem/i915_gem_stolen.c
@@ -53,8 +53,10 @@ int i915_gem_stolen_insert_node(struct drm_i915_private *i915,
struct drm_mm_node *node, u64 size,
unsigned alignment)
{
- return i915_gem_stolen_insert_node_in_range(i915, node, size,
- alignment, 0, U64_MAX);
+ return i915_gem_stolen_insert_node_in_range(i915, node,
+ size, alignment,
+ I915_GEM_STOLEN_BIAS,
+ U64_MAX);
}
void i915_gem_stolen_remove_node(struct drm_i915_private *i915,
diff --git a/drivers/gpu/drm/i915/gem/i915_gem_stolen.h b/drivers/gpu/drm/i915/gem/i915_gem_stolen.h
index e15c0ad..61e0280 100644
--- a/drivers/gpu/drm/i915/gem/i915_gem_stolen.h
+++ b/drivers/gpu/drm/i915/gem/i915_gem_stolen.h
@@ -30,4 +30,6 @@ i915_gem_object_create_stolen_for_preallocated(struct drm_i915_private *dev_priv
resource_size_t stolen_offset,
resource_size_t size);
+#define I915_GEM_STOLEN_BIAS SZ_128K
+
#endif /* __I915_GEM_STOLEN_H__ */
diff --git a/drivers/gpu/drm/i915/gt/gen6_ppgtt.c b/drivers/gpu/drm/i915/gt/gen6_ppgtt.c
index fd0d24d..c30adc0 100644
--- a/drivers/gpu/drm/i915/gt/gen6_ppgtt.c
+++ b/drivers/gpu/drm/i915/gt/gen6_ppgtt.c
@@ -239,18 +239,24 @@ static int gen6_ppgtt_init_scratch(struct gen6_ppgtt *ppgtt)
I915_CACHE_NONE, PTE_READ_ONLY);
vm->scratch[1] = vm->alloc_pt_dma(vm, I915_GTT_PAGE_SIZE_4K);
- if (IS_ERR(vm->scratch[1]))
- return PTR_ERR(vm->scratch[1]);
+ if (IS_ERR(vm->scratch[1])) {
+ ret = PTR_ERR(vm->scratch[1]);
+ goto err_scratch0;
+ }
ret = pin_pt_dma(vm, vm->scratch[1]);
- if (ret) {
- i915_gem_object_put(vm->scratch[1]);
- return ret;
- }
+ if (ret)
+ goto err_scratch1;
fill32_px(vm->scratch[1], vm->scratch[0]->encode);
return 0;
+
+err_scratch1:
+ i915_gem_object_put(vm->scratch[1]);
+err_scratch0:
+ i915_gem_object_put(vm->scratch[0]);
+ return ret;
}
static void gen6_ppgtt_free_pd(struct gen6_ppgtt *ppgtt)
diff --git a/drivers/gpu/drm/i915/gt/gen8_ppgtt.c b/drivers/gpu/drm/i915/gt/gen8_ppgtt.c
index eb64f47..38c7069 100644
--- a/drivers/gpu/drm/i915/gt/gen8_ppgtt.c
+++ b/drivers/gpu/drm/i915/gt/gen8_ppgtt.c
@@ -604,7 +604,8 @@ static int gen8_init_scratch(struct i915_address_space *vm)
return 0;
free_scratch:
- free_scratch(vm);
+ while (i--)
+ i915_gem_object_put(vm->scratch[i]);
return -ENOMEM;
}
diff --git a/drivers/gpu/drm/i915/gt/intel_engine_types.h b/drivers/gpu/drm/i915/gt/intel_engine_types.h
index c400aaa..ee63126 100644
--- a/drivers/gpu/drm/i915/gt/intel_engine_types.h
+++ b/drivers/gpu/drm/i915/gt/intel_engine_types.h
@@ -278,7 +278,7 @@ struct intel_engine_execlists {
*
* Note these register may be either mmio or HWSP shadow.
*/
- u32 *csb_status;
+ u64 *csb_status;
/**
* @csb_size: context status buffer FIFO size
diff --git a/drivers/gpu/drm/i915/gt/intel_lrc.c b/drivers/gpu/drm/i915/gt/intel_lrc.c
index 0412a44..a32aabc 100644
--- a/drivers/gpu/drm/i915/gt/intel_lrc.c
+++ b/drivers/gpu/drm/i915/gt/intel_lrc.c
@@ -1140,9 +1140,8 @@ __unwind_incomplete_requests(struct intel_engine_cs *engine)
/* Check in case we rollback so far we wrap [size/2] */
if (intel_ring_direction(rq->ring,
- intel_ring_wrap(rq->ring,
- rq->tail),
- rq->ring->tail) > 0)
+ rq->tail,
+ rq->ring->tail + 8) > 0)
rq->context->lrc.desc |= CTX_DESC_FORCE_RESTORE;
active = rq;
@@ -2464,7 +2463,7 @@ cancel_port_requests(struct intel_engine_execlists * const execlists)
}
static inline void
-invalidate_csb_entries(const u32 *first, const u32 *last)
+invalidate_csb_entries(const u64 *first, const u64 *last)
{
clflush((void *)first);
clflush((void *)last);
@@ -2496,14 +2495,25 @@ invalidate_csb_entries(const u32 *first, const u32 *last)
* bits 47-57: sw context id of the lrc the GT switched away from
* bits 58-63: sw counter of the lrc the GT switched away from
*/
-static inline bool
-gen12_csb_parse(const struct intel_engine_execlists *execlists, const u32 *csb)
+static inline bool gen12_csb_parse(const u64 *csb)
{
- u32 lower_dw = csb[0];
- u32 upper_dw = csb[1];
- bool ctx_to_valid = GEN12_CSB_CTX_VALID(lower_dw);
- bool ctx_away_valid = GEN12_CSB_CTX_VALID(upper_dw);
- bool new_queue = lower_dw & GEN12_CTX_STATUS_SWITCHED_TO_NEW_QUEUE;
+ bool ctx_away_valid;
+ bool new_queue;
+ u64 entry;
+
+ /* HSD#22011248461 */
+ entry = READ_ONCE(*csb);
+ if (unlikely(entry == -1)) {
+ preempt_disable();
+ if (wait_for_atomic_us((entry = READ_ONCE(*csb)) != -1, 50))
+ GEM_WARN_ON("50us CSB timeout");
+ preempt_enable();
+ }
+ WRITE_ONCE(*(u64 *)csb, -1);
+
+ ctx_away_valid = GEN12_CSB_CTX_VALID(upper_32_bits(entry));
+ new_queue =
+ lower_32_bits(entry) & GEN12_CTX_STATUS_SWITCHED_TO_NEW_QUEUE;
/*
* The context switch detail is not guaranteed to be 5 when a preemption
@@ -2513,7 +2523,7 @@ gen12_csb_parse(const struct intel_engine_execlists *execlists, const u32 *csb)
* would require some extra handling, but we don't support that.
*/
if (!ctx_away_valid || new_queue) {
- GEM_BUG_ON(!ctx_to_valid);
+ GEM_BUG_ON(!GEN12_CSB_CTX_VALID(lower_32_bits(entry)));
return true;
}
@@ -2522,12 +2532,11 @@ gen12_csb_parse(const struct intel_engine_execlists *execlists, const u32 *csb)
* context switch on an unsuccessful wait instruction since we always
* use polling mode.
*/
- GEM_BUG_ON(GEN12_CTX_SWITCH_DETAIL(upper_dw));
+ GEM_BUG_ON(GEN12_CTX_SWITCH_DETAIL(upper_32_bits(entry)));
return false;
}
-static inline bool
-gen8_csb_parse(const struct intel_engine_execlists *execlists, const u32 *csb)
+static inline bool gen8_csb_parse(const u64 *csb)
{
return *csb & (GEN8_CTX_STATUS_IDLE_ACTIVE | GEN8_CTX_STATUS_PREEMPTED);
}
@@ -2535,7 +2544,7 @@ gen8_csb_parse(const struct intel_engine_execlists *execlists, const u32 *csb)
static void process_csb(struct intel_engine_cs *engine)
{
struct intel_engine_execlists * const execlists = &engine->execlists;
- const u32 * const buf = execlists->csb_status;
+ const u64 * const buf = execlists->csb_status;
const u8 num_entries = execlists->csb_size;
u8 head, tail;
@@ -2616,12 +2625,14 @@ static void process_csb(struct intel_engine_cs *engine)
*/
ENGINE_TRACE(engine, "csb[%d]: status=0x%08x:0x%08x\n",
- head, buf[2 * head + 0], buf[2 * head + 1]);
+ head,
+ upper_32_bits(buf[head]),
+ lower_32_bits(buf[head]));
if (INTEL_GEN(engine->i915) >= 12)
- promote = gen12_csb_parse(execlists, buf + 2 * head);
+ promote = gen12_csb_parse(buf + head);
else
- promote = gen8_csb_parse(execlists, buf + 2 * head);
+ promote = gen8_csb_parse(buf + head);
if (promote) {
struct i915_request * const *old = execlists->active;
@@ -2649,6 +2660,9 @@ static void process_csb(struct intel_engine_cs *engine)
smp_wmb(); /* complete the seqlock */
WRITE_ONCE(execlists->active, execlists->inflight);
+ /* XXX Magic delay for tgl */
+ ENGINE_POSTING_READ(engine, RING_CONTEXT_STATUS_PTR);
+
WRITE_ONCE(execlists->pending[0], NULL);
} else {
if (GEM_WARN_ON(!*execlists->active)) {
@@ -4005,6 +4019,8 @@ static void reset_csb_pointers(struct intel_engine_cs *engine)
WRITE_ONCE(*execlists->csb_write, reset_value);
wmb(); /* Make sure this is visible to HW (paranoia?) */
+ /* Check that the GPU does indeed update the CSB entries! */
+ memset(execlists->csb_status, -1, (reset_value + 1) * sizeof(u64));
invalidate_csb_entries(&execlists->csb_status[0],
&execlists->csb_status[reset_value]);
@@ -5157,7 +5173,7 @@ int intel_execlists_submission_setup(struct intel_engine_cs *engine)
}
execlists->csb_status =
- &engine->status_page.addr[I915_HWS_CSB_BUF0_INDEX];
+ (u64 *)&engine->status_page.addr[I915_HWS_CSB_BUF0_INDEX];
execlists->csb_write =
&engine->status_page.addr[intel_hws_csb_write_index(i915)];
diff --git a/drivers/gpu/drm/i915/gt/intel_mocs.c b/drivers/gpu/drm/i915/gt/intel_mocs.c
index 632e08a..b8f56e6 100644
--- a/drivers/gpu/drm/i915/gt/intel_mocs.c
+++ b/drivers/gpu/drm/i915/gt/intel_mocs.c
@@ -234,11 +234,17 @@ static const struct drm_i915_mocs_entry broxton_mocs_table[] = {
L3_1_UC)
static const struct drm_i915_mocs_entry tgl_mocs_table[] = {
- /* Base - Error (Reserved for Non-Use) */
- MOCS_ENTRY(0, 0x0, 0x0),
- /* Base - Reserved */
- MOCS_ENTRY(1, 0x0, 0x0),
-
+ /*
+ * NOTE:
+ * Reserved and unspecified MOCS indices have been set to (L3 + LCC).
+ * These reserved entries should never be used, they may be changed
+ * to low performant variants with better coherency in the future if
+ * more entries are needed. We are programming index I915_MOCS_PTE(1)
+ * only, __init_mocs_table() take care to program unused index with
+ * this entry.
+ */
+ MOCS_ENTRY(1, LE_3_WB | LE_TC_1_LLC | LE_LRUM(3),
+ L3_3_WB),
GEN11_MOCS_ENTRIES,
/* Implicitly enable L1 - HDC:L1 + L3 + LLC */
diff --git a/drivers/gpu/drm/i915/gt/selftest_reset.c b/drivers/gpu/drm/i915/gt/selftest_reset.c
index 35406ec..ef5aeeb 100644
--- a/drivers/gpu/drm/i915/gt/selftest_reset.c
+++ b/drivers/gpu/drm/i915/gt/selftest_reset.c
@@ -3,9 +3,203 @@
* Copyright © 2018 Intel Corporation
*/
+#include <linux/crc32.h>
+
+#include "gem/i915_gem_stolen.h"
+
+#include "i915_memcpy.h"
#include "i915_selftest.h"
#include "selftests/igt_reset.h"
#include "selftests/igt_atomic.h"
+#include "selftests/igt_spinner.h"
+
+static int
+__igt_reset_stolen(struct intel_gt *gt,
+ intel_engine_mask_t mask,
+ const char *msg)
+{
+ struct i915_ggtt *ggtt = >->i915->ggtt;
+ const struct resource *dsm = >->i915->dsm;
+ resource_size_t num_pages, page;
+ struct intel_engine_cs *engine;
+ intel_wakeref_t wakeref;
+ enum intel_engine_id id;
+ struct igt_spinner spin;
+ long max, count;
+ void *tmp;
+ u32 *crc;
+ int err;
+
+ if (!drm_mm_node_allocated(&ggtt->error_capture))
+ return 0;
+
+ num_pages = resource_size(dsm) >> PAGE_SHIFT;
+ if (!num_pages)
+ return 0;
+
+ crc = kmalloc_array(num_pages, sizeof(u32), GFP_KERNEL);
+ if (!crc)
+ return -ENOMEM;
+
+ tmp = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!tmp) {
+ err = -ENOMEM;
+ goto err_crc;
+ }
+
+ igt_global_reset_lock(gt);
+ wakeref = intel_runtime_pm_get(gt->uncore->rpm);
+
+ err = igt_spinner_init(&spin, gt);
+ if (err)
+ goto err_lock;
+
+ for_each_engine(engine, gt, id) {
+ struct intel_context *ce;
+ struct i915_request *rq;
+
+ if (!(mask & engine->mask))
+ continue;
+
+ if (!intel_engine_can_store_dword(engine))
+ continue;
+
+ ce = intel_context_create(engine);
+ if (IS_ERR(ce)) {
+ err = PTR_ERR(ce);
+ goto err_spin;
+ }
+ rq = igt_spinner_create_request(&spin, ce, MI_ARB_CHECK);
+ intel_context_put(ce);
+ if (IS_ERR(rq)) {
+ err = PTR_ERR(rq);
+ goto err_spin;
+ }
+ i915_request_add(rq);
+ }
+
+ for (page = 0; page < num_pages; page++) {
+ dma_addr_t dma = (dma_addr_t)dsm->start + (page << PAGE_SHIFT);
+ void __iomem *s;
+ void *in;
+
+ ggtt->vm.insert_page(&ggtt->vm, dma,
+ ggtt->error_capture.start,
+ I915_CACHE_NONE, 0);
+ mb();
+
+ s = io_mapping_map_wc(&ggtt->iomap,
+ ggtt->error_capture.start,
+ PAGE_SIZE);
+
+ if (!__drm_mm_interval_first(>->i915->mm.stolen,
+ page << PAGE_SHIFT,
+ ((page + 1) << PAGE_SHIFT) - 1))
+ memset32(s, STACK_MAGIC, PAGE_SIZE / sizeof(u32));
+
+ in = s;
+ if (i915_memcpy_from_wc(tmp, s, PAGE_SIZE))
+ in = tmp;
+ crc[page] = crc32_le(0, in, PAGE_SIZE);
+
+ io_mapping_unmap(s);
+ }
+ mb();
+ ggtt->vm.clear_range(&ggtt->vm, ggtt->error_capture.start, PAGE_SIZE);
+
+ if (mask == ALL_ENGINES) {
+ intel_gt_reset(gt, mask, NULL);
+ } else {
+ for_each_engine(engine, gt, id) {
+ if (mask & engine->mask)
+ intel_engine_reset(engine, NULL);
+ }
+ }
+
+ max = -1;
+ count = 0;
+ for (page = 0; page < num_pages; page++) {
+ dma_addr_t dma = (dma_addr_t)dsm->start + (page << PAGE_SHIFT);
+ void __iomem *s;
+ void *in;
+ u32 x;
+
+ ggtt->vm.insert_page(&ggtt->vm, dma,
+ ggtt->error_capture.start,
+ I915_CACHE_NONE, 0);
+ mb();
+
+ s = io_mapping_map_wc(&ggtt->iomap,
+ ggtt->error_capture.start,
+ PAGE_SIZE);
+
+ in = s;
+ if (i915_memcpy_from_wc(tmp, s, PAGE_SIZE))
+ in = tmp;
+ x = crc32_le(0, in, PAGE_SIZE);
+
+ if (x != crc[page] &&
+ !__drm_mm_interval_first(>->i915->mm.stolen,
+ page << PAGE_SHIFT,
+ ((page + 1) << PAGE_SHIFT) - 1)) {
+ pr_debug("unused stolen page %pa modified by GPU reset\n",
+ &page);
+ if (count++ == 0)
+ igt_hexdump(in, PAGE_SIZE);
+ max = page;
+ }
+
+ io_mapping_unmap(s);
+ }
+ mb();
+ ggtt->vm.clear_range(&ggtt->vm, ggtt->error_capture.start, PAGE_SIZE);
+
+ if (count > 0) {
+ pr_info("%s reset clobbered %ld pages of stolen, last clobber at page %ld\n",
+ msg, count, max);
+ }
+ if (max >= I915_GEM_STOLEN_BIAS >> PAGE_SHIFT) {
+ pr_err("%s reset clobbered unreserved area [above %x] of stolen; may cause severe faults\n",
+ msg, I915_GEM_STOLEN_BIAS);
+ err = -EINVAL;
+ }
+
+err_spin:
+ igt_spinner_fini(&spin);
+
+err_lock:
+ intel_runtime_pm_put(gt->uncore->rpm, wakeref);
+ igt_global_reset_unlock(gt);
+
+ kfree(tmp);
+err_crc:
+ kfree(crc);
+ return err;
+}
+
+static int igt_reset_device_stolen(void *arg)
+{
+ return __igt_reset_stolen(arg, ALL_ENGINES, "device");
+}
+
+static int igt_reset_engines_stolen(void *arg)
+{
+ struct intel_gt *gt = arg;
+ struct intel_engine_cs *engine;
+ enum intel_engine_id id;
+ int err;
+
+ if (!intel_has_reset_engine(gt))
+ return 0;
+
+ for_each_engine(engine, gt, id) {
+ err = __igt_reset_stolen(gt, engine->mask, engine->name);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
static int igt_global_reset(void *arg)
{
@@ -164,6 +358,8 @@ int intel_reset_live_selftests(struct drm_i915_private *i915)
{
static const struct i915_subtest tests[] = {
SUBTEST(igt_global_reset), /* attempt to recover GPU first */
+ SUBTEST(igt_reset_device_stolen),
+ SUBTEST(igt_reset_engines_stolen),
SUBTEST(igt_wedged_reset),
SUBTEST(igt_atomic_reset),
SUBTEST(igt_atomic_engine_reset),
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index eef9a82..8426d59 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -33,6 +33,8 @@
#include <uapi/drm/i915_drm.h>
#include <uapi/drm/drm_fourcc.h>
+#include <asm/hypervisor.h>
+
#include <linux/io-mapping.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
@@ -1760,7 +1762,9 @@ static inline bool intel_vtd_active(void)
if (intel_iommu_gfx_mapped)
return true;
#endif
- return false;
+
+ /* Running as a guest, we assume the host is enforcing VT'd */
+ return !hypervisor_is_type(X86_HYPER_NATIVE);
}
static inline bool intel_scanout_needs_vtd_wa(struct drm_i915_private *dev_priv)
diff --git a/drivers/gpu/drm/i915/i915_gpu_error.c b/drivers/gpu/drm/i915/i915_gpu_error.c
index a635ec8..cf6e47a 100644
--- a/drivers/gpu/drm/i915/i915_gpu_error.c
+++ b/drivers/gpu/drm/i915/i915_gpu_error.c
@@ -1312,7 +1312,7 @@ capture_vma(struct intel_engine_capture_vma *next,
}
strcpy(c->name, name);
- c->vma = i915_vma_get(vma);
+ c->vma = vma; /* reference held while active */
c->next = next;
return c;
@@ -1402,7 +1402,6 @@ intel_engine_coredump_add_vma(struct intel_engine_coredump *ee,
compress));
i915_active_release(&vma->active);
- i915_vma_put(vma);
capture = this->next;
kfree(this);
diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
index 263ffcb..97ded2a 100644
--- a/drivers/gpu/drm/i915/intel_uncore.c
+++ b/drivers/gpu/drm/i915/intel_uncore.c
@@ -1209,6 +1209,18 @@ unclaimed_reg_debug(struct intel_uncore *uncore,
spin_unlock(&uncore->debug->lock);
}
+#define __vgpu_read(x) \
+static u##x \
+vgpu_read##x(struct intel_uncore *uncore, i915_reg_t reg, bool trace) { \
+ u##x val = __raw_uncore_read##x(uncore, reg); \
+ trace_i915_reg_rw(false, reg, val, sizeof(val), trace); \
+ return val; \
+}
+__vgpu_read(8)
+__vgpu_read(16)
+__vgpu_read(32)
+__vgpu_read(64)
+
#define GEN2_READ_HEADER(x) \
u##x val = 0; \
assert_rpm_wakelock_held(uncore->rpm);
@@ -1414,6 +1426,16 @@ __gen_reg_write_funcs(gen8);
#undef GEN6_WRITE_FOOTER
#undef GEN6_WRITE_HEADER
+#define __vgpu_write(x) \
+static void \
+vgpu_write##x(struct intel_uncore *uncore, i915_reg_t reg, u##x val, bool trace) { \
+ trace_i915_reg_rw(true, reg, val, sizeof(val), trace); \
+ __raw_uncore_write##x(uncore, reg, val); \
+}
+__vgpu_write(8)
+__vgpu_write(16)
+__vgpu_write(32)
+
#define ASSIGN_RAW_WRITE_MMIO_VFUNCS(uncore, x) \
do { \
(uncore)->funcs.mmio_writeb = x##_write8; \
@@ -1735,7 +1757,10 @@ static void uncore_raw_init(struct intel_uncore *uncore)
{
GEM_BUG_ON(intel_uncore_has_forcewake(uncore));
- if (IS_GEN(uncore->i915, 5)) {
+ if (intel_vgpu_active(uncore->i915)) {
+ ASSIGN_RAW_WRITE_MMIO_VFUNCS(uncore, vgpu);
+ ASSIGN_RAW_READ_MMIO_VFUNCS(uncore, vgpu);
+ } else if (IS_GEN(uncore->i915, 5)) {
ASSIGN_RAW_WRITE_MMIO_VFUNCS(uncore, gen5);
ASSIGN_RAW_READ_MMIO_VFUNCS(uncore, gen5);
} else {
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 4d29568..ac03857 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -481,7 +481,7 @@ static void mtk_drm_crtc_hw_config(struct mtk_drm_crtc *mtk_crtc)
mbox_flush(mtk_crtc->cmdq_client->chan, 2000);
cmdq_handle = cmdq_pkt_create(mtk_crtc->cmdq_client, PAGE_SIZE);
cmdq_pkt_clear_event(cmdq_handle, mtk_crtc->cmdq_event);
- cmdq_pkt_wfe(cmdq_handle, mtk_crtc->cmdq_event);
+ cmdq_pkt_wfe(cmdq_handle, mtk_crtc->cmdq_event, false);
mtk_crtc_ddp_config(crtc, cmdq_handle);
cmdq_pkt_finalize(cmdq_handle);
cmdq_pkt_flush_async(cmdq_handle, ddp_cmdq_cb, cmdq_handle);
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index 70b3bee..eb4b7df 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -647,7 +647,7 @@ bool ttm_bo_eviction_valuable(struct ttm_buffer_object *bo,
/* Don't evict this BO if it's outside of the
* requested placement range
*/
- if (place->fpfn >= (bo->mem.start + bo->mem.size) ||
+ if (place->fpfn >= (bo->mem.start + bo->mem.num_pages) ||
(place->lpfn && place->lpfn <= bo->mem.start))
return false;
diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
index 7f41213..311eee5 100644
--- a/drivers/hid/hid-rmi.c
+++ b/drivers/hid/hid-rmi.c
@@ -720,7 +720,7 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
}
if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS)
- rmi_hid_pdata.f30_data.disable = true;
+ rmi_hid_pdata.gpio_data.disable = true;
data->xport.dev = hdev->dev.parent;
data->xport.pdata = rmi_hid_pdata;
diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c
index b490fe3..f2703c5 100644
--- a/drivers/hwmon/s3c-hwmon.c
+++ b/drivers/hwmon/s3c-hwmon.c
@@ -20,7 +20,7 @@
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
-#include <plat/adc.h>
+#include <linux/soc/samsung/s3c-adc.h>
#include <linux/platform_data/hwmon-s3c.h>
struct s3c_hwmon_attr {
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index 9a810e4..56f5b80 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -8,7 +8,7 @@
*/
/*
- * intel_idle is a cpuidle driver that loads on specific Intel processors
+ * intel_idle is a cpuidle driver that loads on all Intel CPUs with MWAIT
* in lieu of the legacy ACPI processor_idle driver. The intent is to
* make Linux more efficient on these processors, as intel_idle knows
* more than ACPI, as well as make Linux more immune to ACPI BIOS bugs.
@@ -20,7 +20,11 @@
* All CPUs have same idle states as boot CPU
*
* Chipset BM_STS (bus master status) bit is a NOP
- * for preventing entry into deep C-stats
+ * for preventing entry into deep C-states
+ *
+ * CPU will flush caches as needed when entering a C-state via MWAIT
+ * (in contrast to entering ACPI C3, in which case the WBINVD
+ * instruction needs to be executed to flush the caches)
*/
/*
@@ -1212,14 +1216,13 @@ static bool __init intel_idle_acpi_cst_extract(void)
if (!intel_idle_cst_usable())
continue;
- if (!acpi_processor_claim_cst_control()) {
- acpi_state_table.count = 0;
- return false;
- }
+ if (!acpi_processor_claim_cst_control())
+ break;
return true;
}
+ acpi_state_table.count = 0;
pr_debug("ACPI _CST not found or not usable\n");
return false;
}
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index e494295..95f9069 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -28,7 +28,6 @@
struct evdev {
int open;
struct input_handle handle;
- wait_queue_head_t wait;
struct evdev_client __rcu *grab;
struct list_head client_list;
spinlock_t client_lock; /* protects client_list */
@@ -43,6 +42,7 @@ struct evdev_client {
unsigned int tail;
unsigned int packet_head; /* [future] position of the first element of next packet */
spinlock_t buffer_lock; /* protects access to buffer, head and tail */
+ wait_queue_head_t wait;
struct fasync_struct *fasync;
struct evdev *evdev;
struct list_head node;
@@ -245,7 +245,6 @@ static void evdev_pass_values(struct evdev_client *client,
const struct input_value *vals, unsigned int count,
ktime_t *ev_time)
{
- struct evdev *evdev = client->evdev;
const struct input_value *v;
struct input_event event;
struct timespec64 ts;
@@ -282,7 +281,7 @@ static void evdev_pass_values(struct evdev_client *client,
spin_unlock(&client->buffer_lock);
if (wakeup)
- wake_up_interruptible_poll(&evdev->wait,
+ wake_up_interruptible_poll(&client->wait,
EPOLLIN | EPOLLOUT | EPOLLRDNORM | EPOLLWRNORM);
}
@@ -426,11 +425,11 @@ static void evdev_hangup(struct evdev *evdev)
struct evdev_client *client;
spin_lock(&evdev->client_lock);
- list_for_each_entry(client, &evdev->client_list, node)
+ list_for_each_entry(client, &evdev->client_list, node) {
kill_fasync(&client->fasync, SIGIO, POLL_HUP);
+ wake_up_interruptible_poll(&client->wait, EPOLLHUP | EPOLLERR);
+ }
spin_unlock(&evdev->client_lock);
-
- wake_up_interruptible_poll(&evdev->wait, EPOLLHUP | EPOLLERR);
}
static int evdev_release(struct inode *inode, struct file *file)
@@ -479,6 +478,7 @@ static int evdev_open(struct inode *inode, struct file *file)
if (!client)
return -ENOMEM;
+ init_waitqueue_head(&client->wait);
client->bufsize = bufsize;
spin_lock_init(&client->buffer_lock);
client->evdev = evdev;
@@ -595,7 +595,7 @@ static ssize_t evdev_read(struct file *file, char __user *buffer,
break;
if (!(file->f_flags & O_NONBLOCK)) {
- error = wait_event_interruptible(evdev->wait,
+ error = wait_event_interruptible(client->wait,
client->packet_head != client->tail ||
!evdev->exist || client->revoked);
if (error)
@@ -613,7 +613,7 @@ static __poll_t evdev_poll(struct file *file, poll_table *wait)
struct evdev *evdev = client->evdev;
__poll_t mask;
- poll_wait(file, &evdev->wait, wait);
+ poll_wait(file, &client->wait, wait);
if (evdev->exist && !client->revoked)
mask = EPOLLOUT | EPOLLWRNORM;
@@ -946,7 +946,7 @@ static int evdev_revoke(struct evdev *evdev, struct evdev_client *client,
client->revoked = true;
evdev_ungrab(evdev, client);
input_flush_device(&evdev->handle, file);
- wake_up_interruptible_poll(&evdev->wait, EPOLLHUP | EPOLLERR);
+ wake_up_interruptible_poll(&client->wait, EPOLLHUP | EPOLLERR);
return 0;
}
@@ -1358,7 +1358,6 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev,
INIT_LIST_HEAD(&evdev->client_list);
spin_lock_init(&evdev->client_lock);
mutex_init(&evdev->mutex);
- init_waitqueue_head(&evdev->wait);
evdev->exist = true;
dev_no = minor;
diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
index f699538b..44fe6f2 100644
--- a/drivers/input/input-mt.c
+++ b/drivers/input/input-mt.c
@@ -323,11 +323,14 @@ static int adjust_dual(int *begin, int step, int *end, int eq, int mu)
p = begin + step;
s = p == end ? f + 1 : *p;
- for (; p != end; p += step)
- if (*p < f)
- s = f, f = *p;
- else if (*p < s)
+ for (; p != end; p += step) {
+ if (*p < f) {
+ s = f;
+ f = *p;
+ } else if (*p < s) {
s = *p;
+ }
+ }
c = (f + s + 1) / 2;
if (c == 0 || (c > mu && (!eq || mu > 0)))
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index eb031b7..b080f0c 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -42,6 +42,16 @@
To compile this driver as a module, choose M here: the
module will be called a3d.
+config JOYSTICK_ADC
+ tristate "Simple joystick connected over ADC"
+ depends on IIO
+ select IIO_BUFFER_CB
+ help
+ Say Y here if you have a simple joystick connected over ADC.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adc-joystick.
+
config JOYSTICK_ADI
tristate "Logitech ADI digital joysticks and gamepads"
select GAMEPORT
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index 8656023..58232b3 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -6,6 +6,7 @@
# Each configuration option enables a list of files.
obj-$(CONFIG_JOYSTICK_A3D) += a3d.o
+obj-$(CONFIG_JOYSTICK_ADC) += adc-joystick.o
obj-$(CONFIG_JOYSTICK_ADI) += adi.o
obj-$(CONFIG_JOYSTICK_AMIGA) += amijoy.o
obj-$(CONFIG_JOYSTICK_AS5011) += as5011.o
diff --git a/drivers/input/joystick/adc-joystick.c b/drivers/input/joystick/adc-joystick.c
new file mode 100644
index 0000000..78ebca7
--- /dev/null
+++ b/drivers/input/joystick/adc-joystick.c
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Input driver for joysticks connected over ADC.
+ * Copyright (c) 2019-2020 Artur Rojek <contact@artur-rojek.eu>
+ */
+#include <linux/ctype.h>
+#include <linux/input.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/consumer.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+#include <asm/unaligned.h>
+
+struct adc_joystick_axis {
+ u32 code;
+ s32 range[2];
+ s32 fuzz;
+ s32 flat;
+};
+
+struct adc_joystick {
+ struct input_dev *input;
+ struct iio_cb_buffer *buffer;
+ struct adc_joystick_axis *axes;
+ struct iio_channel *chans;
+ int num_chans;
+};
+
+static int adc_joystick_handle(const void *data, void *private)
+{
+ struct adc_joystick *joy = private;
+ enum iio_endian endianness;
+ int bytes, msb, val, idx, i;
+ const u16 *data_u16;
+ bool sign;
+
+ bytes = joy->chans[0].channel->scan_type.storagebits >> 3;
+
+ for (i = 0; i < joy->num_chans; ++i) {
+ idx = joy->chans[i].channel->scan_index;
+ endianness = joy->chans[i].channel->scan_type.endianness;
+ msb = joy->chans[i].channel->scan_type.realbits - 1;
+ sign = tolower(joy->chans[i].channel->scan_type.sign) == 's';
+
+ switch (bytes) {
+ case 1:
+ val = ((const u8 *)data)[idx];
+ break;
+ case 2:
+ data_u16 = (const u16 *)data + idx;
+
+ /*
+ * Data is aligned to the sample size by IIO core.
+ * Call `get_unaligned_xe16` to hide type casting.
+ */
+ if (endianness == IIO_BE)
+ val = get_unaligned_be16(data_u16);
+ else if (endianness == IIO_LE)
+ val = get_unaligned_le16(data_u16);
+ else /* IIO_CPU */
+ val = *data_u16;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ val >>= joy->chans[i].channel->scan_type.shift;
+ if (sign)
+ val = sign_extend32(val, msb);
+ else
+ val &= GENMASK(msb, 0);
+ input_report_abs(joy->input, joy->axes[i].code, val);
+ }
+
+ input_sync(joy->input);
+
+ return 0;
+}
+
+static int adc_joystick_open(struct input_dev *dev)
+{
+ struct adc_joystick *joy = input_get_drvdata(dev);
+ struct device *devp = &dev->dev;
+ int ret;
+
+ ret = iio_channel_start_all_cb(joy->buffer);
+ if (ret)
+ dev_err(devp, "Unable to start callback buffer: %d\n", ret);
+
+ return ret;
+}
+
+static void adc_joystick_close(struct input_dev *dev)
+{
+ struct adc_joystick *joy = input_get_drvdata(dev);
+
+ iio_channel_stop_all_cb(joy->buffer);
+}
+
+static void adc_joystick_cleanup(void *data)
+{
+ iio_channel_release_all_cb(data);
+}
+
+static int adc_joystick_set_axes(struct device *dev, struct adc_joystick *joy)
+{
+ struct adc_joystick_axis *axes;
+ struct fwnode_handle *child;
+ int num_axes, error, i;
+
+ num_axes = device_get_child_node_count(dev);
+ if (!num_axes) {
+ dev_err(dev, "Unable to find child nodes\n");
+ return -EINVAL;
+ }
+
+ if (num_axes != joy->num_chans) {
+ dev_err(dev, "Got %d child nodes for %d channels\n",
+ num_axes, joy->num_chans);
+ return -EINVAL;
+ }
+
+ axes = devm_kmalloc_array(dev, num_axes, sizeof(*axes), GFP_KERNEL);
+ if (!axes)
+ return -ENOMEM;
+
+ device_for_each_child_node(dev, child) {
+ error = fwnode_property_read_u32(child, "reg", &i);
+ if (error) {
+ dev_err(dev, "reg invalid or missing\n");
+ goto err_fwnode_put;
+ }
+
+ if (i >= num_axes) {
+ error = -EINVAL;
+ dev_err(dev, "No matching axis for reg %d\n", i);
+ goto err_fwnode_put;
+ }
+
+ error = fwnode_property_read_u32(child, "linux,code",
+ &axes[i].code);
+ if (error) {
+ dev_err(dev, "linux,code invalid or missing\n");
+ goto err_fwnode_put;
+ }
+
+ error = fwnode_property_read_u32_array(child, "abs-range",
+ axes[i].range, 2);
+ if (error) {
+ dev_err(dev, "abs-range invalid or missing\n");
+ goto err_fwnode_put;
+ }
+
+ fwnode_property_read_u32(child, "abs-fuzz", &axes[i].fuzz);
+ fwnode_property_read_u32(child, "abs-flat", &axes[i].flat);
+
+ input_set_abs_params(joy->input, axes[i].code,
+ axes[i].range[0], axes[i].range[1],
+ axes[i].fuzz, axes[i].flat);
+ input_set_capability(joy->input, EV_ABS, axes[i].code);
+ }
+
+ joy->axes = axes;
+
+ return 0;
+
+err_fwnode_put:
+ fwnode_handle_put(child);
+ return error;
+}
+
+static int adc_joystick_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct adc_joystick *joy;
+ struct input_dev *input;
+ int error;
+ int bits;
+ int i;
+
+ joy = devm_kzalloc(dev, sizeof(*joy), GFP_KERNEL);
+ if (!joy)
+ return -ENOMEM;
+
+ joy->chans = devm_iio_channel_get_all(dev);
+ if (IS_ERR(joy->chans)) {
+ error = PTR_ERR(joy->chans);
+ if (error != -EPROBE_DEFER)
+ dev_err(dev, "Unable to get IIO channels");
+ return error;
+ }
+
+ /* Count how many channels we got. NULL terminated. */
+ for (i = 0; joy->chans[i].indio_dev; i++) {
+ bits = joy->chans[i].channel->scan_type.storagebits;
+ if (!bits || bits > 16) {
+ dev_err(dev, "Unsupported channel storage size\n");
+ return -EINVAL;
+ }
+ if (bits != joy->chans[0].channel->scan_type.storagebits) {
+ dev_err(dev, "Channels must have equal storage size\n");
+ return -EINVAL;
+ }
+ }
+ joy->num_chans = i;
+
+ input = devm_input_allocate_device(dev);
+ if (!input) {
+ dev_err(dev, "Unable to allocate input device\n");
+ return -ENOMEM;
+ }
+
+ joy->input = input;
+ input->name = pdev->name;
+ input->id.bustype = BUS_HOST;
+ input->open = adc_joystick_open;
+ input->close = adc_joystick_close;
+
+ error = adc_joystick_set_axes(dev, joy);
+ if (error)
+ return error;
+
+ input_set_drvdata(input, joy);
+ error = input_register_device(input);
+ if (error) {
+ dev_err(dev, "Unable to register input device\n");
+ return error;
+ }
+
+ joy->buffer = iio_channel_get_all_cb(dev, adc_joystick_handle, joy);
+ if (IS_ERR(joy->buffer)) {
+ dev_err(dev, "Unable to allocate callback buffer\n");
+ return PTR_ERR(joy->buffer);
+ }
+
+ error = devm_add_action_or_reset(dev, adc_joystick_cleanup, joy->buffer);
+ if (error) {
+ dev_err(dev, "Unable to add action\n");
+ return error;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id adc_joystick_of_match[] = {
+ { .compatible = "adc-joystick", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, adc_joystick_of_match);
+
+static struct platform_driver adc_joystick_driver = {
+ .driver = {
+ .name = "adc-joystick",
+ .of_match_table = adc_joystick_of_match,
+ },
+ .probe = adc_joystick_probe,
+};
+module_platform_driver(adc_joystick_driver);
+
+MODULE_DESCRIPTION("Input driver for joysticks connected over ADC");
+MODULE_AUTHOR("Artur Rojek <contact@artur-rojek.eu>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c
index 7c70492..f831f01 100644
--- a/drivers/input/keyboard/ep93xx_keypad.c
+++ b/drivers/input/keyboard/ep93xx_keypad.c
@@ -250,8 +250,8 @@ static int ep93xx_keypad_probe(struct platform_device *pdev)
}
keypad->irq = platform_get_irq(pdev, 0);
- if (!keypad->irq) {
- err = -ENXIO;
+ if (keypad->irq < 0) {
+ err = keypad->irq;
goto failed_free;
}
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index 94c94d7..d6c9240 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -240,10 +240,8 @@ static int omap4_keypad_probe(struct platform_device *pdev)
}
irq = platform_get_irq(pdev, 0);
- if (!irq) {
- dev_err(&pdev->dev, "no keyboard irq assigned\n");
- return -EINVAL;
- }
+ if (irq < 0)
+ return irq;
keypad_data = kzalloc(sizeof(struct omap4_keypad), GFP_KERNEL);
if (!keypad_data) {
diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index af3a682..77e0743 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -50,7 +50,7 @@ struct twl4030_keypad {
bool autorepeat;
unsigned int n_rows;
unsigned int n_cols;
- unsigned int irq;
+ int irq;
struct device *dbg_dev;
struct input_dev *input;
@@ -376,10 +376,8 @@ static int twl4030_kp_probe(struct platform_device *pdev)
}
kp->irq = platform_get_irq(pdev, 0);
- if (!kp->irq) {
- dev_err(&pdev->dev, "no keyboard irq assigned\n");
- return -EINVAL;
- }
+ if (kp->irq < 0)
+ return kp->irq;
error = matrix_keypad_build_keymap(keymap_data, NULL,
TWL4030_MAX_ROWS,
diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c
index 08520b3..cae1a3f 100644
--- a/drivers/input/misc/soc_button_array.c
+++ b/drivers/input/misc/soc_button_array.c
@@ -11,6 +11,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/acpi.h>
+#include <linux/dmi.h>
#include <linux/gpio/consumer.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
@@ -23,6 +24,7 @@ struct soc_button_info {
unsigned int event_code;
bool autorepeat;
bool wakeup;
+ bool active_low;
};
struct soc_device_data {
@@ -42,22 +44,65 @@ struct soc_button_data {
};
/*
+ * Some 2-in-1s which use the soc_button_array driver have this ugly issue in
+ * their DSDT where the _LID method modifies the irq-type settings of the GPIOs
+ * used for the power and home buttons. The intend of this AML code is to
+ * disable these buttons when the lid is closed.
+ * The AML does this by directly poking the GPIO controllers registers. This is
+ * problematic because when re-enabling the irq, which happens whenever _LID
+ * gets called with the lid open (e.g. on boot and on resume), it sets the
+ * irq-type to IRQ_TYPE_LEVEL_LOW. Where as the gpio-keys driver programs the
+ * type to, and expects it to be, IRQ_TYPE_EDGE_BOTH.
+ * To work around this we don't set gpio_keys_button.gpio on these 2-in-1s,
+ * instead we get the irq for the GPIO ourselves, configure it as
+ * IRQ_TYPE_LEVEL_LOW (to match how the _LID AML code configures it) and pass
+ * the irq in gpio_keys_button.irq. Below is a list of affected devices.
+ */
+static const struct dmi_system_id dmi_use_low_level_irq[] = {
+ {
+ /*
+ * Acer Switch 10 SW5-012. _LID method messes with home- and
+ * power-button GPIO IRQ settings. When (re-)enabling the irq
+ * it ors in its own flags without clearing the previous set
+ * ones, leading to an irq-type of IRQ_TYPE_LEVEL_LOW |
+ * IRQ_TYPE_LEVEL_HIGH causing a continuous interrupt storm.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"),
+ },
+ },
+ {
+ /*
+ * Acer One S1003. _LID method messes with power-button GPIO
+ * IRQ settings, leading to a non working power-button.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "One S1003"),
+ },
+ },
+ {} /* Terminating entry */
+};
+
+/*
* Get the Nth GPIO number from the ACPI object.
*/
-static int soc_button_lookup_gpio(struct device *dev, int acpi_index)
+static int soc_button_lookup_gpio(struct device *dev, int acpi_index,
+ int *gpio_ret, int *irq_ret)
{
struct gpio_desc *desc;
- int gpio;
desc = gpiod_get_index(dev, NULL, acpi_index, GPIOD_ASIS);
if (IS_ERR(desc))
return PTR_ERR(desc);
- gpio = desc_to_gpio(desc);
+ *gpio_ret = desc_to_gpio(desc);
+ *irq_ret = gpiod_to_irq(desc);
gpiod_put(desc);
- return gpio;
+ return 0;
}
static struct platform_device *
@@ -69,9 +114,8 @@ soc_button_device_create(struct platform_device *pdev,
struct platform_device *pd;
struct gpio_keys_button *gpio_keys;
struct gpio_keys_platform_data *gpio_keys_pdata;
+ int error, gpio, irq;
int n_buttons = 0;
- int gpio;
- int error;
for (info = button_info; info->name; info++)
if (info->autorepeat == autorepeat)
@@ -91,8 +135,8 @@ soc_button_device_create(struct platform_device *pdev,
if (info->autorepeat != autorepeat)
continue;
- gpio = soc_button_lookup_gpio(&pdev->dev, info->acpi_index);
- if (!gpio_is_valid(gpio)) {
+ error = soc_button_lookup_gpio(&pdev->dev, info->acpi_index, &gpio, &irq);
+ if (error || irq < 0) {
/*
* Skip GPIO if not present. Note we deliberately
* ignore -EPROBE_DEFER errors here. On some devices
@@ -107,10 +151,18 @@ soc_button_device_create(struct platform_device *pdev,
continue;
}
+ /* See dmi_use_low_level_irq[] comment */
+ if (!autorepeat && dmi_check_system(dmi_use_low_level_irq)) {
+ irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
+ gpio_keys[n_buttons].irq = irq;
+ gpio_keys[n_buttons].gpio = -ENOENT;
+ } else {
+ gpio_keys[n_buttons].gpio = gpio;
+ }
+
gpio_keys[n_buttons].type = info->event_type;
gpio_keys[n_buttons].code = info->event_code;
- gpio_keys[n_buttons].gpio = gpio;
- gpio_keys[n_buttons].active_low = 1;
+ gpio_keys[n_buttons].active_low = info->active_low;
gpio_keys[n_buttons].desc = info->name;
gpio_keys[n_buttons].wakeup = info->wakeup;
/* These devices often use cheap buttons, use 50 ms debounce */
@@ -173,6 +225,7 @@ static int soc_button_parse_btn_desc(struct device *dev,
}
info->event_type = EV_KEY;
+ info->active_low = true;
info->acpi_index =
soc_button_get_acpi_object_int(&desc->package.elements[1]);
upage = soc_button_get_acpi_object_int(&desc->package.elements[3]);
@@ -383,11 +436,11 @@ static int soc_button_probe(struct platform_device *pdev)
* Platforms"
*/
static const struct soc_button_info soc_button_PNP0C40[] = {
- { "power", 0, EV_KEY, KEY_POWER, false, true },
- { "home", 1, EV_KEY, KEY_LEFTMETA, false, true },
- { "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false },
- { "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false },
- { "rotation_lock", 4, EV_KEY, KEY_ROTATE_LOCK_TOGGLE, false, false },
+ { "power", 0, EV_KEY, KEY_POWER, false, true, true },
+ { "home", 1, EV_KEY, KEY_LEFTMETA, false, true, true },
+ { "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false, true },
+ { "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false, true },
+ { "rotation_lock", 4, EV_KEY, KEY_ROTATE_LOCK_TOGGLE, false, false, true },
{ }
};
@@ -395,6 +448,15 @@ static const struct soc_device_data soc_device_PNP0C40 = {
.button_info = soc_button_PNP0C40,
};
+static const struct soc_button_info soc_button_INT33D3[] = {
+ { "tablet_mode", 0, EV_SW, SW_TABLET_MODE, false, false, false },
+ { }
+};
+
+static const struct soc_device_data soc_device_INT33D3 = {
+ .button_info = soc_button_INT33D3,
+};
+
/*
* Special device check for Surface Book 2 and Surface Pro (2017).
* Both, the Surface Pro 4 (surfacepro3_button.c) and the above mentioned
@@ -444,9 +506,9 @@ static int soc_device_check_MSHW0040(struct device *dev)
* Obtained from DSDT/testing.
*/
static const struct soc_button_info soc_button_MSHW0040[] = {
- { "power", 0, EV_KEY, KEY_POWER, false, true },
- { "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false },
- { "volume_down", 4, EV_KEY, KEY_VOLUMEDOWN, true, false },
+ { "power", 0, EV_KEY, KEY_POWER, false, true, true },
+ { "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false, true },
+ { "volume_down", 4, EV_KEY, KEY_VOLUMEDOWN, true, false, true },
{ }
};
@@ -457,6 +519,8 @@ static const struct soc_device_data soc_device_MSHW0040 = {
static const struct acpi_device_id soc_button_acpi_match[] = {
{ "PNP0C40", (unsigned long)&soc_device_PNP0C40 },
+ { "INT33D3", (unsigned long)&soc_device_INT33D3 },
+ { "ID9001", (unsigned long)&soc_device_INT33D3 },
{ "ACPI0011", 0 },
/* Microsoft Surface Devices (5th and 6th generation) */
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 4b81b2d..8257709 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -179,12 +179,14 @@ static const char * const smbus_pnp_ids[] = {
"LEN0093", /* T480 */
"LEN0096", /* X280 */
"LEN0097", /* X280 -> ALPS trackpoint */
- "LEN0099", /* X1 Extreme 1st */
+ "LEN0099", /* X1 Extreme Gen 1 / P1 Gen 1 */
"LEN009b", /* T580 */
+ "LEN0402", /* X1 Extreme Gen 2 / P1 Gen 2 */
"LEN200f", /* T450s */
"LEN2044", /* L470 */
"LEN2054", /* E480 */
"LEN2055", /* E580 */
+ "LEN2068", /* T14 Gen 1 */
"SYN3052", /* HP EliteBook 840 G4 */
"SYN3221", /* HP 15-ay000 */
"SYN323d", /* HP Spectre X360 13-w013dx */
@@ -1752,7 +1754,7 @@ static int synaptics_create_intertouch(struct psmouse *psmouse,
.kernel_tracking = false,
.topbuttonpad = topbuttonpad,
},
- .f30_data = {
+ .gpio_data = {
.buttonpad = SYN_CAP_CLICKPAD(info->ext_cap_0c),
.trackstick_buttons =
!!SYN_CAP_EXT_BUTTONS_STICK(info->ext_cap_10),
diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig
index a212ff7..16119f7 100644
--- a/drivers/input/rmi4/Kconfig
+++ b/drivers/input/rmi4/Kconfig
@@ -100,6 +100,14 @@
device via the firmware loader interface. This is triggered using a
sysfs attribute.
+config RMI4_F3A
+ bool "RMI4 Function 3A (GPIO)"
+ help
+ Say Y here if you want to add support for RMI4 function 3A.
+
+ Function 3A provides GPIO support for RMI4 devices. This includes
+ support for buttons on TouchPads and ClickPads.
+
config RMI4_F54
bool "RMI4 Function 54 (Analog diagnostics)"
depends on VIDEO_V4L2=y || (RMI4_CORE=m && VIDEO_V4L2=m)
diff --git a/drivers/input/rmi4/Makefile b/drivers/input/rmi4/Makefile
index f176316..02f14c8 100644
--- a/drivers/input/rmi4/Makefile
+++ b/drivers/input/rmi4/Makefile
@@ -10,6 +10,7 @@
rmi_core-$(CONFIG_RMI4_F12) += rmi_f12.o
rmi_core-$(CONFIG_RMI4_F30) += rmi_f30.o
rmi_core-$(CONFIG_RMI4_F34) += rmi_f34.o rmi_f34v7.o
+rmi_core-$(CONFIG_RMI4_F3A) += rmi_f3a.o
rmi_core-$(CONFIG_RMI4_F54) += rmi_f54.o
rmi_core-$(CONFIG_RMI4_F55) += rmi_f55.o
diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c
index af706a58..47d1b97 100644
--- a/drivers/input/rmi4/rmi_bus.c
+++ b/drivers/input/rmi4/rmi_bus.c
@@ -365,6 +365,9 @@ static struct rmi_function_handler *fn_handlers[] = {
#ifdef CONFIG_RMI4_F34
&rmi_f34_handler,
#endif
+#ifdef CONFIG_RMI4_F3A
+ &rmi_f3a_handler,
+#endif
#ifdef CONFIG_RMI4_F54
&rmi_f54_handler,
#endif
diff --git a/drivers/input/rmi4/rmi_driver.h b/drivers/input/rmi4/rmi_driver.h
index 65bfaa95..1c6c608 100644
--- a/drivers/input/rmi4/rmi_driver.h
+++ b/drivers/input/rmi4/rmi_driver.h
@@ -135,6 +135,7 @@ extern struct rmi_function_handler rmi_f11_handler;
extern struct rmi_function_handler rmi_f12_handler;
extern struct rmi_function_handler rmi_f30_handler;
extern struct rmi_function_handler rmi_f34_handler;
+extern struct rmi_function_handler rmi_f3a_handler;
extern struct rmi_function_handler rmi_f54_handler;
extern struct rmi_function_handler rmi_f55_handler;
#endif
diff --git a/drivers/input/rmi4/rmi_f30.c b/drivers/input/rmi4/rmi_f30.c
index a90dad1d..35045f1 100644
--- a/drivers/input/rmi4/rmi_f30.c
+++ b/drivers/input/rmi4/rmi_f30.c
@@ -168,17 +168,17 @@ static int rmi_f30_config(struct rmi_function *fn)
rmi_get_platform_data(fn->rmi_dev);
int error;
- /* can happen if f30_data.disable is set */
+ /* can happen if gpio_data.disable is set */
if (!f30)
return 0;
- if (pdata->f30_data.trackstick_buttons) {
+ if (pdata->gpio_data.trackstick_buttons) {
/* Try [re-]establish link to F03. */
f30->f03 = rmi_find_function(fn->rmi_dev, 0x03);
f30->trackstick_buttons = f30->f03 != NULL;
}
- if (pdata->f30_data.disable) {
+ if (pdata->gpio_data.disable) {
drv->clear_irq_bits(fn->rmi_dev, fn->irq_mask);
} else {
/* Write Control Register values back to device */
@@ -245,10 +245,10 @@ static int rmi_f30_map_gpios(struct rmi_function *fn,
if (!rmi_f30_is_valid_button(i, f30->ctrl))
continue;
- if (pdata->f30_data.trackstick_buttons &&
+ if (pdata->gpio_data.trackstick_buttons &&
i >= TRACKSTICK_RANGE_START && i < TRACKSTICK_RANGE_END) {
f30->gpioled_key_map[i] = trackstick_button++;
- } else if (!pdata->f30_data.buttonpad || !button_mapped) {
+ } else if (!pdata->gpio_data.buttonpad || !button_mapped) {
f30->gpioled_key_map[i] = button;
input_set_capability(input, EV_KEY, button++);
button_mapped = true;
@@ -264,7 +264,7 @@ static int rmi_f30_map_gpios(struct rmi_function *fn,
* but I am not sure, so use only the pdata info and the number of
* mapped buttons.
*/
- if (pdata->f30_data.buttonpad || (button - BTN_LEFT == 1))
+ if (pdata->gpio_data.buttonpad || (button - BTN_LEFT == 1))
__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
return 0;
@@ -372,7 +372,7 @@ static int rmi_f30_probe(struct rmi_function *fn)
struct f30_data *f30;
int error;
- if (pdata->f30_data.disable)
+ if (pdata->gpio_data.disable)
return 0;
if (!drv_data->input) {
diff --git a/drivers/input/rmi4/rmi_f34v7.c b/drivers/input/rmi4/rmi_f34v7.c
index 74f7c6f..8d7ec9d 100644
--- a/drivers/input/rmi4/rmi_f34v7.c
+++ b/drivers/input/rmi4/rmi_f34v7.c
@@ -1364,9 +1364,14 @@ int rmi_f34v7_probe(struct f34_data *f34)
f34->bl_version = 6;
} else if (f34->bootloader_id[1] == 7) {
f34->bl_version = 7;
+ } else if (f34->bootloader_id[1] == 8) {
+ f34->bl_version = 8;
} else {
- dev_err(&f34->fn->dev, "%s: Unrecognized bootloader version\n",
- __func__);
+ dev_err(&f34->fn->dev,
+ "%s: Unrecognized bootloader version: %d (%c) %d (%c)\n",
+ __func__,
+ f34->bootloader_id[0], f34->bootloader_id[0],
+ f34->bootloader_id[1], f34->bootloader_id[1]);
return -EINVAL;
}
diff --git a/drivers/input/rmi4/rmi_f3a.c b/drivers/input/rmi4/rmi_f3a.c
new file mode 100644
index 0000000..0e8baed
--- /dev/null
+++ b/drivers/input/rmi4/rmi_f3a.c
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2020 Synaptics Incorporated
+ */
+
+#include <linux/kernel.h>
+#include <linux/rmi.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include "rmi_driver.h"
+
+#define RMI_F3A_MAX_GPIO_COUNT 128
+#define RMI_F3A_MAX_REG_SIZE DIV_ROUND_UP(RMI_F3A_MAX_GPIO_COUNT, 8)
+
+/* Defs for Query 0 */
+#define RMI_F3A_GPIO_COUNT 0x7F
+
+#define RMI_F3A_DATA_REGS_MAX_SIZE RMI_F3A_MAX_REG_SIZE
+
+#define TRACKSTICK_RANGE_START 3
+#define TRACKSTICK_RANGE_END 6
+
+struct f3a_data {
+ /* Query Data */
+ u8 gpio_count;
+
+ u8 register_count;
+
+ u8 data_regs[RMI_F3A_DATA_REGS_MAX_SIZE];
+ u16 *gpio_key_map;
+
+ struct input_dev *input;
+
+ struct rmi_function *f03;
+ bool trackstick_buttons;
+};
+
+static void rmi_f3a_report_button(struct rmi_function *fn,
+ struct f3a_data *f3a, unsigned int button)
+{
+ u16 key_code = f3a->gpio_key_map[button];
+ bool key_down = !(f3a->data_regs[0] & BIT(button));
+
+ if (f3a->trackstick_buttons &&
+ button >= TRACKSTICK_RANGE_START &&
+ button <= TRACKSTICK_RANGE_END) {
+ rmi_f03_overwrite_button(f3a->f03, key_code, key_down);
+ } else {
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev,
+ "%s: call input report key (0x%04x) value (0x%02x)",
+ __func__, key_code, key_down);
+ input_report_key(f3a->input, key_code, key_down);
+ }
+}
+
+static irqreturn_t rmi_f3a_attention(int irq, void *ctx)
+{
+ struct rmi_function *fn = ctx;
+ struct f3a_data *f3a = dev_get_drvdata(&fn->dev);
+ struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev);
+ int error;
+ int i;
+
+ if (drvdata->attn_data.data) {
+ if (drvdata->attn_data.size < f3a->register_count) {
+ dev_warn(&fn->dev,
+ "F3A interrupted, but data is missing\n");
+ return IRQ_HANDLED;
+ }
+ memcpy(f3a->data_regs, drvdata->attn_data.data,
+ f3a->register_count);
+ drvdata->attn_data.data += f3a->register_count;
+ drvdata->attn_data.size -= f3a->register_count;
+ } else {
+ error = rmi_read_block(fn->rmi_dev, fn->fd.data_base_addr,
+ f3a->data_regs, f3a->register_count);
+ if (error) {
+ dev_err(&fn->dev,
+ "%s: Failed to read F3a data registers: %d\n",
+ __func__, error);
+ return IRQ_RETVAL(error);
+ }
+ }
+
+ for (i = 0; i < f3a->gpio_count; i++)
+ if (f3a->gpio_key_map[i] != KEY_RESERVED)
+ rmi_f3a_report_button(fn, f3a, i);
+ if (f3a->trackstick_buttons)
+ rmi_f03_commit_buttons(f3a->f03);
+
+ return IRQ_HANDLED;
+}
+
+static int rmi_f3a_config(struct rmi_function *fn)
+{
+ struct f3a_data *f3a = dev_get_drvdata(&fn->dev);
+ struct rmi_driver *drv = fn->rmi_dev->driver;
+ const struct rmi_device_platform_data *pdata =
+ rmi_get_platform_data(fn->rmi_dev);
+
+ if (!f3a)
+ return 0;
+
+ if (pdata->gpio_data.trackstick_buttons) {
+ /* Try [re-]establish link to F03. */
+ f3a->f03 = rmi_find_function(fn->rmi_dev, 0x03);
+ f3a->trackstick_buttons = f3a->f03 != NULL;
+ }
+
+ drv->set_irq_bits(fn->rmi_dev, fn->irq_mask);
+
+ return 0;
+}
+
+static bool rmi_f3a_is_valid_button(int button, struct f3a_data *f3a,
+ u8 *query1_regs, u8 *ctrl1_regs)
+{
+ /* gpio exist && direction input */
+ return (query1_regs[0] & BIT(button)) && !(ctrl1_regs[0] & BIT(button));
+}
+
+static int rmi_f3a_map_gpios(struct rmi_function *fn, struct f3a_data *f3a,
+ u8 *query1_regs, u8 *ctrl1_regs)
+{
+ const struct rmi_device_platform_data *pdata =
+ rmi_get_platform_data(fn->rmi_dev);
+ struct input_dev *input = f3a->input;
+ unsigned int button = BTN_LEFT;
+ unsigned int trackstick_button = BTN_LEFT;
+ bool button_mapped = false;
+ int i;
+ int button_count = min_t(u8, f3a->gpio_count, TRACKSTICK_RANGE_END);
+
+ f3a->gpio_key_map = devm_kcalloc(&fn->dev,
+ button_count,
+ sizeof(f3a->gpio_key_map[0]),
+ GFP_KERNEL);
+ if (!f3a->gpio_key_map) {
+ dev_err(&fn->dev, "Failed to allocate gpio map memory.\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < button_count; i++) {
+ if (!rmi_f3a_is_valid_button(i, f3a, query1_regs, ctrl1_regs))
+ continue;
+
+ if (pdata->gpio_data.trackstick_buttons &&
+ i >= TRACKSTICK_RANGE_START &&
+ i < TRACKSTICK_RANGE_END) {
+ f3a->gpio_key_map[i] = trackstick_button++;
+ } else if (!pdata->gpio_data.buttonpad || !button_mapped) {
+ f3a->gpio_key_map[i] = button;
+ input_set_capability(input, EV_KEY, button++);
+ button_mapped = true;
+ }
+ }
+ input->keycode = f3a->gpio_key_map;
+ input->keycodesize = sizeof(f3a->gpio_key_map[0]);
+ input->keycodemax = f3a->gpio_count;
+
+ if (pdata->gpio_data.buttonpad || (button - BTN_LEFT == 1))
+ __set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
+
+ return 0;
+}
+
+static int rmi_f3a_initialize(struct rmi_function *fn, struct f3a_data *f3a)
+{
+ u8 query1[RMI_F3A_MAX_REG_SIZE];
+ u8 ctrl1[RMI_F3A_MAX_REG_SIZE];
+ u8 buf;
+ int error;
+
+ error = rmi_read(fn->rmi_dev, fn->fd.query_base_addr, &buf);
+ if (error < 0) {
+ dev_err(&fn->dev, "Failed to read general info register: %d\n",
+ error);
+ return -ENODEV;
+ }
+
+ f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT;
+ f3a->register_count = DIV_ROUND_UP(f3a->gpio_count, 8);
+
+ /* Query1 -> gpio exist */
+ error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr + 1,
+ query1, f3a->register_count);
+ if (error) {
+ dev_err(&fn->dev, "Failed to read query1 register\n");
+ return error;
+ }
+
+ /* Ctrl1 -> gpio direction */
+ error = rmi_read_block(fn->rmi_dev, fn->fd.control_base_addr + 1,
+ ctrl1, f3a->register_count);
+ if (error) {
+ dev_err(&fn->dev, "Failed to read control1 register\n");
+ return error;
+ }
+
+ error = rmi_f3a_map_gpios(fn, f3a, query1, ctrl1);
+ if (error)
+ return error;
+
+ return 0;
+}
+
+static int rmi_f3a_probe(struct rmi_function *fn)
+{
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
+ struct f3a_data *f3a;
+ int error;
+
+ if (!drv_data->input) {
+ dev_info(&fn->dev, "F3A: no input device found, ignoring\n");
+ return -ENXIO;
+ }
+
+ f3a = devm_kzalloc(&fn->dev, sizeof(*f3a), GFP_KERNEL);
+ if (!f3a)
+ return -ENOMEM;
+
+ f3a->input = drv_data->input;
+
+ error = rmi_f3a_initialize(fn, f3a);
+ if (error)
+ return error;
+
+ dev_set_drvdata(&fn->dev, f3a);
+ return 0;
+}
+
+struct rmi_function_handler rmi_f3a_handler = {
+ .driver = {
+ .name = "rmi4_f3a",
+ },
+ .func = 0x3a,
+ .probe = rmi_f3a_probe,
+ .config = rmi_f3a_config,
+ .attention = rmi_f3a_attention,
+};
diff --git a/drivers/input/serio/hil_mlc.c b/drivers/input/serio/hil_mlc.c
index 65f4e9d..d36e89d 100644
--- a/drivers/input/serio/hil_mlc.c
+++ b/drivers/input/serio/hil_mlc.c
@@ -74,7 +74,7 @@ EXPORT_SYMBOL(hil_mlc_unregister);
static LIST_HEAD(hil_mlcs);
static DEFINE_RWLOCK(hil_mlcs_lock);
static struct timer_list hil_mlcs_kicker;
-static int hil_mlcs_probe;
+static int hil_mlcs_probe, hil_mlc_stop;
static void hil_mlcs_process(unsigned long unused);
static DECLARE_TASKLET_DISABLED_OLD(hil_mlcs_tasklet, hil_mlcs_process);
@@ -702,9 +702,13 @@ static int hilse_donode(hil_mlc *mlc)
if (!mlc->ostarted) {
mlc->ostarted = 1;
mlc->opacket = pack;
- mlc->out(mlc);
+ rc = mlc->out(mlc);
nextidx = HILSEN_DOZE;
write_unlock_irqrestore(&mlc->lock, flags);
+ if (rc) {
+ hil_mlc_stop = 1;
+ return 1;
+ }
break;
}
mlc->ostarted = 0;
@@ -715,8 +719,13 @@ static int hilse_donode(hil_mlc *mlc)
case HILSE_CTS:
write_lock_irqsave(&mlc->lock, flags);
- nextidx = mlc->cts(mlc) ? node->bad : node->good;
+ rc = mlc->cts(mlc);
+ nextidx = rc ? node->bad : node->good;
write_unlock_irqrestore(&mlc->lock, flags);
+ if (rc) {
+ hil_mlc_stop = 1;
+ return 1;
+ }
break;
default:
@@ -780,6 +789,12 @@ static void hil_mlcs_process(unsigned long unused)
static void hil_mlcs_timer(struct timer_list *unused)
{
+ if (hil_mlc_stop) {
+ /* could not send packet - stop immediately. */
+ pr_warn(PREFIX "HIL seems stuck - Disabling HIL MLC.\n");
+ return;
+ }
+
hil_mlcs_probe = 1;
tasklet_schedule(&hil_mlcs_tasklet);
/* Re-insert the periodic task. */
diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c
index 232d30c..3e85e90 100644
--- a/drivers/input/serio/hp_sdc_mlc.c
+++ b/drivers/input/serio/hp_sdc_mlc.c
@@ -210,7 +210,7 @@ static int hp_sdc_mlc_cts(hil_mlc *mlc)
priv->tseq[2] = 1;
priv->tseq[3] = 0;
priv->tseq[4] = 0;
- __hp_sdc_enqueue_transaction(&priv->trans);
+ return __hp_sdc_enqueue_transaction(&priv->trans);
busy:
return 1;
done:
@@ -219,7 +219,7 @@ static int hp_sdc_mlc_cts(hil_mlc *mlc)
return 0;
}
-static void hp_sdc_mlc_out(hil_mlc *mlc)
+static int hp_sdc_mlc_out(hil_mlc *mlc)
{
struct hp_sdc_mlc_priv_s *priv;
@@ -234,7 +234,7 @@ static void hp_sdc_mlc_out(hil_mlc *mlc)
do_data:
if (priv->emtestmode) {
up(&mlc->osem);
- return;
+ return 0;
}
/* Shouldn't be sending commands when loop may be busy */
BUG_ON(down_trylock(&mlc->csem));
@@ -296,7 +296,7 @@ static void hp_sdc_mlc_out(hil_mlc *mlc)
BUG_ON(down_trylock(&mlc->csem));
}
enqueue:
- hp_sdc_enqueue_transaction(&priv->trans);
+ return hp_sdc_enqueue_transaction(&priv->trans);
}
static int __init hp_sdc_mlc_init(void)
diff --git a/drivers/input/serio/sun4i-ps2.c b/drivers/input/serio/sun4i-ps2.c
index a681a2c..f15ed3d 100644
--- a/drivers/input/serio/sun4i-ps2.c
+++ b/drivers/input/serio/sun4i-ps2.c
@@ -211,7 +211,6 @@ static int sun4i_ps2_probe(struct platform_device *pdev)
struct sun4i_ps2data *drvdata;
struct serio *serio;
struct device *dev = &pdev->dev;
- unsigned int irq;
int error;
drvdata = kzalloc(sizeof(struct sun4i_ps2data), GFP_KERNEL);
@@ -264,14 +263,12 @@ static int sun4i_ps2_probe(struct platform_device *pdev)
writel(0, drvdata->reg_base + PS2_REG_GCTL);
/* Get IRQ for the device */
- irq = platform_get_irq(pdev, 0);
- if (!irq) {
- dev_err(dev, "no IRQ found\n");
- error = -ENXIO;
+ drvdata->irq = platform_get_irq(pdev, 0);
+ if (drvdata->irq < 0) {
+ error = drvdata->irq;
goto err_disable_clk;
}
- drvdata->irq = irq;
drvdata->serio = serio;
drvdata->dev = dev;
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 35c867b..f012fe7 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -1322,4 +1322,16 @@
To compile this driver as a module, choose M here: the
module will be called iqs5xx.
+config TOUCHSCREEN_ZINITIX
+ tristate "Zinitix touchscreen support"
+ depends on I2C
+ help
+ Say Y here if you have a touchscreen using Zinitix bt541,
+ or something similar enough.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called zinitix.
+
endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 30d1e1b..6233541 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -111,3 +111,4 @@
obj-$(CONFIG_TOUCHSCREEN_ROHM_BU21023) += rohm_bu21023.o
obj-$(CONFIG_TOUCHSCREEN_RASPBERRYPI_FW) += raspberrypi-ts.o
obj-$(CONFIG_TOUCHSCREEN_IQS5XX) += iqs5xx.o
+obj-$(CONFIG_TOUCHSCREEN_ZINITIX) += zinitix.o
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index b0bd5bb..50c3482 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -90,7 +90,7 @@
/* FW read command, 0x53 0x?? 0x0, 0x01 */
#define E_ELAN_INFO_FW_VER 0x00
#define E_ELAN_INFO_BC_VER 0x10
-#define E_ELAN_INFO_REK 0xE0
+#define E_ELAN_INFO_REK 0xD0
#define E_ELAN_INFO_TEST_VER 0xE0
#define E_ELAN_INFO_FW_ID 0xF0
#define E_INFO_OSR 0xD6
@@ -134,6 +134,7 @@ struct elants_data {
u8 bc_version;
u8 iap_version;
u16 hw_version;
+ u8 major_res;
unsigned int x_res; /* resolution in units/mm */
unsigned int y_res;
unsigned int x_max;
@@ -459,6 +460,9 @@ static int elants_i2c_query_ts_info(struct elants_data *ts)
rows = resp[2] + resp[6] + resp[10];
cols = resp[3] + resp[7] + resp[11];
+ /* Get report resolution value of ABS_MT_TOUCH_MAJOR */
+ ts->major_res = resp[16];
+
/* Process mm_to_pixel information */
error = elants_i2c_execute_command(client,
get_osr_cmd, sizeof(get_osr_cmd),
@@ -1325,6 +1329,8 @@ static int elants_i2c_probe(struct i2c_client *client,
0, MT_TOOL_PALM, 0, 0);
input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
+ if (ts->major_res > 0)
+ input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, ts->major_res);
touchscreen_parse_properties(ts->input, true, &ts->prop);
diff --git a/drivers/input/touchscreen/imx6ul_tsc.c b/drivers/input/touchscreen/imx6ul_tsc.c
index 9ed2588..cd369f9 100644
--- a/drivers/input/touchscreen/imx6ul_tsc.c
+++ b/drivers/input/touchscreen/imx6ul_tsc.c
@@ -315,9 +315,8 @@ static irqreturn_t adc_irq_fn(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static int imx6ul_tsc_open(struct input_dev *input_dev)
+static int imx6ul_tsc_start(struct imx6ul_tsc *tsc)
{
- struct imx6ul_tsc *tsc = input_get_drvdata(input_dev);
int err;
err = clk_prepare_enable(tsc->adc_clk);
@@ -349,16 +348,29 @@ static int imx6ul_tsc_open(struct input_dev *input_dev)
return err;
}
-static void imx6ul_tsc_close(struct input_dev *input_dev)
+static void imx6ul_tsc_stop(struct imx6ul_tsc *tsc)
{
- struct imx6ul_tsc *tsc = input_get_drvdata(input_dev);
-
imx6ul_tsc_disable(tsc);
clk_disable_unprepare(tsc->tsc_clk);
clk_disable_unprepare(tsc->adc_clk);
}
+
+static int imx6ul_tsc_open(struct input_dev *input_dev)
+{
+ struct imx6ul_tsc *tsc = input_get_drvdata(input_dev);
+
+ return imx6ul_tsc_start(tsc);
+}
+
+static void imx6ul_tsc_close(struct input_dev *input_dev)
+{
+ struct imx6ul_tsc *tsc = input_get_drvdata(input_dev);
+
+ imx6ul_tsc_stop(tsc);
+}
+
static int imx6ul_tsc_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@@ -509,12 +521,8 @@ static int __maybe_unused imx6ul_tsc_suspend(struct device *dev)
mutex_lock(&input_dev->mutex);
- if (input_dev->users) {
- imx6ul_tsc_disable(tsc);
-
- clk_disable_unprepare(tsc->tsc_clk);
- clk_disable_unprepare(tsc->adc_clk);
- }
+ if (input_dev->users)
+ imx6ul_tsc_stop(tsc);
mutex_unlock(&input_dev->mutex);
@@ -530,22 +538,11 @@ static int __maybe_unused imx6ul_tsc_resume(struct device *dev)
mutex_lock(&input_dev->mutex);
- if (input_dev->users) {
- retval = clk_prepare_enable(tsc->adc_clk);
- if (retval)
- goto out;
+ if (input_dev->users)
+ retval = imx6ul_tsc_start(tsc);
- retval = clk_prepare_enable(tsc->tsc_clk);
- if (retval) {
- clk_disable_unprepare(tsc->adc_clk);
- goto out;
- }
-
- retval = imx6ul_tsc_init(tsc);
- }
-
-out:
mutex_unlock(&input_dev->mutex);
+
return retval;
}
diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c
index fe24543..e694a9b 100644
--- a/drivers/input/touchscreen/raydium_i2c_ts.c
+++ b/drivers/input/touchscreen/raydium_i2c_ts.c
@@ -51,6 +51,7 @@
/* Touch relative info */
#define RM_MAX_RETRIES 3
+#define RM_RETRY_DELAY_MS 20
#define RM_MAX_TOUCH_NUM 10
#define RM_BOOT_DELAY_MS 100
@@ -136,83 +137,82 @@ struct raydium_data {
bool wake_irq_enabled;
};
-static int raydium_i2c_send(struct i2c_client *client,
- u8 addr, const void *data, size_t len)
+static int raydium_i2c_xfer(struct i2c_client *client,
+ u32 addr, void *data, size_t len, bool is_read)
{
- u8 *buf;
- int tries = 0;
- int ret;
+ struct raydium_bank_switch_header {
+ u8 cmd;
+ __be32 be_addr;
+ } __packed header = {
+ .cmd = RM_CMD_BANK_SWITCH,
+ .be_addr = cpu_to_be32(addr),
+ };
- buf = kmalloc(len + 1, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
+ u8 reg_addr = addr & 0xff;
- buf[0] = addr;
- memcpy(buf + 1, data, len);
-
- do {
- ret = i2c_master_send(client, buf, len + 1);
- if (likely(ret == len + 1))
- break;
-
- msleep(20);
- } while (++tries < RM_MAX_RETRIES);
-
- kfree(buf);
-
- if (unlikely(ret != len + 1)) {
- if (ret >= 0)
- ret = -EIO;
- dev_err(&client->dev, "%s failed: %d\n", __func__, ret);
- return ret;
- }
-
- return 0;
-}
-
-static int raydium_i2c_read(struct i2c_client *client,
- u8 addr, void *data, size_t len)
-{
struct i2c_msg xfer[] = {
{
.addr = client->addr,
- .len = 1,
- .buf = &addr,
+ .len = sizeof(header),
+ .buf = (u8 *)&header,
},
{
.addr = client->addr,
- .flags = I2C_M_RD,
+ .len = 1,
+ .buf = ®_addr,
+ },
+ {
+ .addr = client->addr,
.len = len,
.buf = data,
+ .flags = is_read ? I2C_M_RD : 0,
}
};
+
+ /*
+ * If address is greater than 255, then RM_CMD_BANK_SWITCH needs to be
+ * sent first. Else, skip the header i.e. xfer[0].
+ */
+ int xfer_start_idx = (addr > 0xff) ? 0 : 1;
+ size_t xfer_count = ARRAY_SIZE(xfer) - xfer_start_idx;
int ret;
- ret = i2c_transfer(client->adapter, xfer, ARRAY_SIZE(xfer));
- if (unlikely(ret != ARRAY_SIZE(xfer)))
- return ret < 0 ? ret : -EIO;
+ ret = i2c_transfer(client->adapter, &xfer[xfer_start_idx], xfer_count);
+ if (likely(ret == xfer_count))
+ return 0;
- return 0;
+ return ret < 0 ? ret : -EIO;
}
-static int raydium_i2c_read_message(struct i2c_client *client,
- u32 addr, void *data, size_t len)
+static int raydium_i2c_send(struct i2c_client *client,
+ u32 addr, const void *data, size_t len)
{
- __be32 be_addr;
+ int tries = 0;
+ int error;
+
+ do {
+ error = raydium_i2c_xfer(client, addr, (void *)data, len,
+ false);
+ if (likely(!error))
+ return 0;
+
+ msleep(RM_RETRY_DELAY_MS);
+ } while (++tries < RM_MAX_RETRIES);
+
+ dev_err(&client->dev, "%s failed: %d\n", __func__, error);
+ return error;
+}
+
+static int raydium_i2c_read(struct i2c_client *client,
+ u32 addr, void *data, size_t len)
+{
size_t xfer_len;
int error;
while (len) {
xfer_len = min_t(size_t, len, RM_MAX_READ_SIZE);
-
- be_addr = cpu_to_be32(addr);
-
- error = raydium_i2c_send(client, RM_CMD_BANK_SWITCH,
- &be_addr, sizeof(be_addr));
- if (!error)
- error = raydium_i2c_read(client, addr & 0xff,
- data, xfer_len);
- if (error)
+ error = raydium_i2c_xfer(client, addr, data, xfer_len, true);
+ if (unlikely(error))
return error;
len -= xfer_len;
@@ -223,27 +223,13 @@ static int raydium_i2c_read_message(struct i2c_client *client,
return 0;
}
-static int raydium_i2c_send_message(struct i2c_client *client,
- u32 addr, const void *data, size_t len)
-{
- __be32 be_addr = cpu_to_be32(addr);
- int error;
-
- error = raydium_i2c_send(client, RM_CMD_BANK_SWITCH,
- &be_addr, sizeof(be_addr));
- if (!error)
- error = raydium_i2c_send(client, addr & 0xff, data, len);
-
- return error;
-}
-
static int raydium_i2c_sw_reset(struct i2c_client *client)
{
const u8 soft_rst_cmd = 0x01;
int error;
- error = raydium_i2c_send_message(client, RM_RESET_MSG_ADDR,
- &soft_rst_cmd, sizeof(soft_rst_cmd));
+ error = raydium_i2c_send(client, RM_RESET_MSG_ADDR, &soft_rst_cmd,
+ sizeof(soft_rst_cmd));
if (error) {
dev_err(&client->dev, "software reset failed: %d\n", error);
return error;
@@ -295,9 +281,8 @@ static int raydium_i2c_query_ts_info(struct raydium_data *ts)
if (error)
continue;
- error = raydium_i2c_read_message(client,
- le32_to_cpu(query_bank_addr),
- &ts->info, sizeof(ts->info));
+ error = raydium_i2c_read(client, le32_to_cpu(query_bank_addr),
+ &ts->info, sizeof(ts->info));
if (error)
continue;
@@ -834,8 +819,8 @@ static irqreturn_t raydium_i2c_irq(int irq, void *_dev)
if (ts->boot_mode != RAYDIUM_TS_MAIN)
goto out;
- error = raydium_i2c_read_message(ts->client, ts->data_bank_addr,
- ts->report_data, ts->pkg_size);
+ error = raydium_i2c_read(ts->client, ts->data_bank_addr,
+ ts->report_data, ts->pkg_size);
if (error)
goto out;
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
index 82920ff..2e70c0b 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -20,10 +20,43 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/adc.h>
-#include <plat/regs-adc.h>
+#include <linux/soc/samsung/s3c-adc.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
+#define S3C2410_ADCCON (0x00)
+#define S3C2410_ADCTSC (0x04)
+#define S3C2410_ADCDLY (0x08)
+#define S3C2410_ADCDAT0 (0x0C)
+#define S3C2410_ADCDAT1 (0x10)
+#define S3C64XX_ADCUPDN (0x14)
+#define S3C2443_ADCMUX (0x18)
+#define S3C64XX_ADCCLRINT (0x18)
+#define S5P_ADCMUX (0x1C)
+#define S3C64XX_ADCCLRINTPNDNUP (0x20)
+
+/* ADCTSC Register Bits */
+#define S3C2443_ADCTSC_UD_SEN (1 << 8)
+#define S3C2410_ADCTSC_YM_SEN (1<<7)
+#define S3C2410_ADCTSC_YP_SEN (1<<6)
+#define S3C2410_ADCTSC_XM_SEN (1<<5)
+#define S3C2410_ADCTSC_XP_SEN (1<<4)
+#define S3C2410_ADCTSC_PULL_UP_DISABLE (1<<3)
+#define S3C2410_ADCTSC_AUTO_PST (1<<2)
+#define S3C2410_ADCTSC_XY_PST(x) (((x)&0x3)<<0)
+
+/* ADCDAT0 Bits */
+#define S3C2410_ADCDAT0_UPDOWN (1<<15)
+#define S3C2410_ADCDAT0_AUTO_PST (1<<14)
+#define S3C2410_ADCDAT0_XY_PST (0x3<<12)
+#define S3C2410_ADCDAT0_XPDATA_MASK (0x03FF)
+
+/* ADCDAT1 Bits */
+#define S3C2410_ADCDAT1_UPDOWN (1<<15)
+#define S3C2410_ADCDAT1_AUTO_PST (1<<14)
+#define S3C2410_ADCDAT1_XY_PST (0x3<<12)
+#define S3C2410_ADCDAT1_YPDATA_MASK (0x03FF)
+
+
#define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))
#define INT_DOWN (0)
diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c
index df94686..9a64e1d 100644
--- a/drivers/input/touchscreen/stmfts.c
+++ b/drivers/input/touchscreen/stmfts.c
@@ -479,7 +479,7 @@ static ssize_t stmfts_sysfs_hover_enable_write(struct device *dev,
mutex_lock(&sdata->mutex);
- if (value & sdata->hover_enabled)
+ if (value && sdata->hover_enabled)
goto out;
if (sdata->running)
diff --git a/drivers/input/touchscreen/zinitix.c b/drivers/input/touchscreen/zinitix.c
new file mode 100644
index 0000000..1acc2eb
--- /dev/null
+++ b/drivers/input/touchscreen/zinitix.c
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+/* Register Map */
+
+#define BT541_SWRESET_CMD 0x0000
+#define BT541_WAKEUP_CMD 0x0001
+
+#define BT541_IDLE_CMD 0x0004
+#define BT541_SLEEP_CMD 0x0005
+
+#define BT541_CLEAR_INT_STATUS_CMD 0x0003
+#define BT541_CALIBRATE_CMD 0x0006
+#define BT541_SAVE_STATUS_CMD 0x0007
+#define BT541_SAVE_CALIBRATION_CMD 0x0008
+#define BT541_RECALL_FACTORY_CMD 0x000f
+
+#define BT541_THRESHOLD 0x0020
+
+#define BT541_LARGE_PALM_REJECT_AREA_TH 0x003F
+
+#define BT541_DEBUG_REG 0x0115 /* 0~7 */
+
+#define BT541_TOUCH_MODE 0x0010
+#define BT541_CHIP_REVISION 0x0011
+#define BT541_FIRMWARE_VERSION 0x0012
+
+#define ZINITIX_USB_DETECT 0x116
+
+#define BT541_MINOR_FW_VERSION 0x0121
+
+#define BT541_VENDOR_ID 0x001C
+#define BT541_HW_ID 0x0014
+
+#define BT541_DATA_VERSION_REG 0x0013
+#define BT541_SUPPORTED_FINGER_NUM 0x0015
+#define BT541_EEPROM_INFO 0x0018
+#define BT541_INITIAL_TOUCH_MODE 0x0019
+
+#define BT541_TOTAL_NUMBER_OF_X 0x0060
+#define BT541_TOTAL_NUMBER_OF_Y 0x0061
+
+#define BT541_DELAY_RAW_FOR_HOST 0x007f
+
+#define BT541_BUTTON_SUPPORTED_NUM 0x00B0
+#define BT541_BUTTON_SENSITIVITY 0x00B2
+#define BT541_DUMMY_BUTTON_SENSITIVITY 0X00C8
+
+#define BT541_X_RESOLUTION 0x00C0
+#define BT541_Y_RESOLUTION 0x00C1
+
+#define BT541_POINT_STATUS_REG 0x0080
+#define BT541_ICON_STATUS_REG 0x00AA
+
+#define BT541_POINT_COORD_REG (BT541_POINT_STATUS_REG + 2)
+
+#define BT541_AFE_FREQUENCY 0x0100
+#define BT541_DND_N_COUNT 0x0122
+#define BT541_DND_U_COUNT 0x0135
+
+#define BT541_RAWDATA_REG 0x0200
+
+#define BT541_EEPROM_INFO_REG 0x0018
+
+#define BT541_INT_ENABLE_FLAG 0x00f0
+#define BT541_PERIODICAL_INTERRUPT_INTERVAL 0x00f1
+
+#define BT541_BTN_WIDTH 0x016d
+
+#define BT541_CHECKSUM_RESULT 0x012c
+
+#define BT541_INIT_FLASH 0x01d0
+#define BT541_WRITE_FLASH 0x01d1
+#define BT541_READ_FLASH 0x01d2
+
+#define ZINITIX_INTERNAL_FLAG_02 0x011e
+#define ZINITIX_INTERNAL_FLAG_03 0x011f
+
+#define ZINITIX_I2C_CHECKSUM_WCNT 0x016a
+#define ZINITIX_I2C_CHECKSUM_RESULT 0x016c
+
+/* Interrupt & status register flags */
+
+#define BIT_PT_CNT_CHANGE BIT(0)
+#define BIT_DOWN BIT(1)
+#define BIT_MOVE BIT(2)
+#define BIT_UP BIT(3)
+#define BIT_PALM BIT(4)
+#define BIT_PALM_REJECT BIT(5)
+#define BIT_RESERVED_0 BIT(6)
+#define BIT_RESERVED_1 BIT(7)
+#define BIT_WEIGHT_CHANGE BIT(8)
+#define BIT_PT_NO_CHANGE BIT(9)
+#define BIT_REJECT BIT(10)
+#define BIT_PT_EXIST BIT(11)
+#define BIT_RESERVED_2 BIT(12)
+#define BIT_ERROR BIT(13)
+#define BIT_DEBUG BIT(14)
+#define BIT_ICON_EVENT BIT(15)
+
+#define SUB_BIT_EXIST BIT(0)
+#define SUB_BIT_DOWN BIT(1)
+#define SUB_BIT_MOVE BIT(2)
+#define SUB_BIT_UP BIT(3)
+#define SUB_BIT_UPDATE BIT(4)
+#define SUB_BIT_WAIT BIT(5)
+
+#define DEFAULT_TOUCH_POINT_MODE 2
+#define MAX_SUPPORTED_FINGER_NUM 5
+
+#define CHIP_ON_DELAY 15 // ms
+#define FIRMWARE_ON_DELAY 40 // ms
+
+struct point_coord {
+ __le16 x;
+ __le16 y;
+ u8 width;
+ u8 sub_status;
+ // currently unused, but needed as padding:
+ u8 minor_width;
+ u8 angle;
+};
+
+struct touch_event {
+ __le16 status;
+ u8 finger_cnt;
+ u8 time_stamp;
+ struct point_coord point_coord[MAX_SUPPORTED_FINGER_NUM];
+};
+
+struct bt541_ts_data {
+ struct i2c_client *client;
+ struct input_dev *input_dev;
+ struct touchscreen_properties prop;
+ struct regulator_bulk_data supplies[2];
+ u32 zinitix_mode;
+};
+
+static int zinitix_read_data(struct i2c_client *client,
+ u16 reg, void *values, size_t length)
+{
+ __le16 reg_le = cpu_to_le16(reg);
+ int ret;
+
+ /* A single i2c_transfer() transaction does not work here. */
+ ret = i2c_master_send(client, (u8 *)®_le, sizeof(reg_le));
+ if (ret != sizeof(reg_le))
+ return ret < 0 ? ret : -EIO;
+
+ ret = i2c_master_recv(client, (u8 *)values, length);
+ if (ret != length)
+ return ret < 0 ? ret : -EIO; ;
+
+ return 0;
+}
+
+static int zinitix_write_u16(struct i2c_client *client, u16 reg, u16 value)
+{
+ __le16 packet[2] = {cpu_to_le16(reg), cpu_to_le16(value)};
+ int ret;
+
+ ret = i2c_master_send(client, (u8 *)packet, sizeof(packet));
+ if (ret != sizeof(packet))
+ return ret < 0 ? ret : -EIO;
+
+ return 0;
+}
+
+static int zinitix_write_cmd(struct i2c_client *client, u16 reg)
+{
+ __le16 reg_le = cpu_to_le16(reg);
+ int ret;
+
+ ret = i2c_master_send(client, (u8 *)®_le, sizeof(reg_le));
+ if (ret != sizeof(reg_le))
+ return ret < 0 ? ret : -EIO;
+
+ return 0;
+}
+
+static bool zinitix_init_touch(struct bt541_ts_data *bt541)
+{
+ struct i2c_client *client = bt541->client;
+ int i;
+ int error;
+
+ error = zinitix_write_cmd(client, BT541_SWRESET_CMD);
+ if (error) {
+ dev_err(&client->dev, "Failed to write reset command\n");
+ return error;
+ }
+
+ error = zinitix_write_u16(client, BT541_INT_ENABLE_FLAG, 0x0);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to reset interrupt enable flag\n");
+ return error;
+ }
+
+ /* initialize */
+ error = zinitix_write_u16(client, BT541_X_RESOLUTION,
+ bt541->prop.max_x);
+ if (error)
+ return error;
+
+ error = zinitix_write_u16(client, BT541_Y_RESOLUTION,
+ bt541->prop.max_y);
+ if (error)
+ return error;
+
+ error = zinitix_write_u16(client, BT541_SUPPORTED_FINGER_NUM,
+ MAX_SUPPORTED_FINGER_NUM);
+ if (error)
+ return error;
+
+ error = zinitix_write_u16(client, BT541_INITIAL_TOUCH_MODE,
+ bt541->zinitix_mode);
+ if (error)
+ return error;
+
+ error = zinitix_write_u16(client, BT541_TOUCH_MODE,
+ bt541->zinitix_mode);
+ if (error)
+ return error;
+
+ error = zinitix_write_u16(client, BT541_INT_ENABLE_FLAG,
+ BIT_PT_CNT_CHANGE | BIT_DOWN | BIT_MOVE |
+ BIT_UP);
+ if (error)
+ return error;
+
+ /* clear queue */
+ for (i = 0; i < 10; i++) {
+ zinitix_write_cmd(client, BT541_CLEAR_INT_STATUS_CMD);
+ udelay(10);
+ }
+
+ return 0;
+}
+
+static int zinitix_init_regulators(struct bt541_ts_data *bt541)
+{
+ struct i2c_client *client = bt541->client;
+ int error;
+
+ bt541->supplies[0].supply = "vdd";
+ bt541->supplies[1].supply = "vddo";
+ error = devm_regulator_bulk_get(&client->dev,
+ ARRAY_SIZE(bt541->supplies),
+ bt541->supplies);
+ if (error < 0) {
+ dev_err(&client->dev, "Failed to get regulators: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int zinitix_send_power_on_sequence(struct bt541_ts_data *bt541)
+{
+ int error;
+ struct i2c_client *client = bt541->client;
+
+ error = zinitix_write_u16(client, 0xc000, 0x0001);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to send power sequence(vendor cmd enable)\n");
+ return error;
+ }
+ udelay(10);
+
+ error = zinitix_write_cmd(client, 0xc004);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to send power sequence (intn clear)\n");
+ return error;
+ }
+ udelay(10);
+
+ error = zinitix_write_u16(client, 0xc002, 0x0001);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to send power sequence (nvm init)\n");
+ return error;
+ }
+ mdelay(2);
+
+ error = zinitix_write_u16(client, 0xc001, 0x0001);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to send power sequence (program start)\n");
+ return error;
+ }
+ msleep(FIRMWARE_ON_DELAY);
+
+ return 0;
+}
+
+static void zinitix_report_finger(struct bt541_ts_data *bt541, int slot,
+ const struct point_coord *p)
+{
+ input_mt_slot(bt541->input_dev, slot);
+ input_mt_report_slot_state(bt541->input_dev, MT_TOOL_FINGER, true);
+ touchscreen_report_pos(bt541->input_dev, &bt541->prop,
+ le16_to_cpu(p->x), le16_to_cpu(p->y), true);
+ input_report_abs(bt541->input_dev, ABS_MT_TOUCH_MAJOR, p->width);
+}
+
+static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler)
+{
+ struct bt541_ts_data *bt541 = bt541_handler;
+ struct i2c_client *client = bt541->client;
+ struct touch_event touch_event;
+ int error;
+ int i;
+
+ memset(&touch_event, 0, sizeof(struct touch_event));
+
+ error = zinitix_read_data(bt541->client, BT541_POINT_STATUS_REG,
+ &touch_event, sizeof(struct touch_event));
+ if (error) {
+ dev_err(&client->dev, "Failed to read in touchpoint struct\n");
+ goto out;
+ }
+
+ for (i = 0; i < MAX_SUPPORTED_FINGER_NUM; i++)
+ if (touch_event.point_coord[i].sub_status & SUB_BIT_EXIST)
+ zinitix_report_finger(bt541, i,
+ &touch_event.point_coord[i]);
+
+ input_mt_sync_frame(bt541->input_dev);
+ input_sync(bt541->input_dev);
+
+out:
+ zinitix_write_cmd(bt541->client, BT541_CLEAR_INT_STATUS_CMD);
+ return IRQ_HANDLED;
+}
+
+static int zinitix_start(struct bt541_ts_data *bt541)
+{
+ int error;
+
+ error = regulator_bulk_enable(ARRAY_SIZE(bt541->supplies),
+ bt541->supplies);
+ if (error) {
+ dev_err(&bt541->client->dev,
+ "Failed to enable regulators: %d\n", error);
+ return error;
+ }
+
+ msleep(CHIP_ON_DELAY);
+
+ error = zinitix_send_power_on_sequence(bt541);
+ if (error) {
+ dev_err(&bt541->client->dev,
+ "Error while sending power-on sequence: %d\n", error);
+ return error;
+ }
+
+ error = zinitix_init_touch(bt541);
+ if (error) {
+ dev_err(&bt541->client->dev,
+ "Error while configuring touch IC\n");
+ return error;
+ }
+
+ enable_irq(bt541->client->irq);
+
+ return 0;
+}
+
+static int zinitix_stop(struct bt541_ts_data *bt541)
+{
+ int error;
+
+ disable_irq(bt541->client->irq);
+
+ error = regulator_bulk_disable(ARRAY_SIZE(bt541->supplies),
+ bt541->supplies);
+ if (error) {
+ dev_err(&bt541->client->dev,
+ "Failed to disable regulators: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int zinitix_input_open(struct input_dev *dev)
+{
+ struct bt541_ts_data *bt541 = input_get_drvdata(dev);
+
+ return zinitix_start(bt541);
+}
+
+static void zinitix_input_close(struct input_dev *dev)
+{
+ struct bt541_ts_data *bt541 = input_get_drvdata(dev);
+
+ zinitix_stop(bt541);
+}
+
+static int zinitix_init_input_dev(struct bt541_ts_data *bt541)
+{
+ struct input_dev *input_dev;
+ int error;
+
+ input_dev = devm_input_allocate_device(&bt541->client->dev);
+ if (!input_dev) {
+ dev_err(&bt541->client->dev,
+ "Failed to allocate input device.");
+ return -ENOMEM;
+ }
+
+ input_set_drvdata(input_dev, bt541);
+ bt541->input_dev = input_dev;
+
+ input_dev->name = "Zinitix Capacitive TouchScreen";
+ input_dev->phys = "input/ts";
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->open = zinitix_input_open;
+ input_dev->close = zinitix_input_close;
+
+ input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X);
+ input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y);
+ input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+
+ touchscreen_parse_properties(input_dev, true, &bt541->prop);
+ if (!bt541->prop.max_x || !bt541->prop.max_y) {
+ dev_err(&bt541->client->dev,
+ "Touchscreen-size-x and/or touchscreen-size-y not set in dts\n");
+ return -EINVAL;
+ }
+
+ error = input_mt_init_slots(input_dev, MAX_SUPPORTED_FINGER_NUM,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+ if (error) {
+ dev_err(&bt541->client->dev,
+ "Failed to initialize MT slots: %d", error);
+ return error;
+ }
+
+ error = input_register_device(input_dev);
+ if (error) {
+ dev_err(&bt541->client->dev,
+ "Failed to register input device: %d", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int zinitix_ts_probe(struct i2c_client *client)
+{
+ struct bt541_ts_data *bt541;
+ int error;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev,
+ "Failed to assert adapter's support for plain I2C.\n");
+ return -ENXIO;
+ }
+
+ bt541 = devm_kzalloc(&client->dev, sizeof(*bt541), GFP_KERNEL);
+ if (!bt541)
+ return -ENOMEM;
+
+ bt541->client = client;
+ i2c_set_clientdata(client, bt541);
+
+ error = zinitix_init_regulators(bt541);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to initialize regulators: %d\n", error);
+ return error;
+ }
+
+ error = zinitix_init_input_dev(bt541);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to initialize input device: %d\n", error);
+ return error;
+ }
+
+ error = device_property_read_u32(&client->dev, "zinitix,mode",
+ &bt541->zinitix_mode);
+ if (error < 0) {
+ /* fall back to mode 2 */
+ bt541->zinitix_mode = DEFAULT_TOUCH_POINT_MODE;
+ }
+
+ if (bt541->zinitix_mode != 2) {
+ /*
+ * If there are devices that don't support mode 2, support
+ * for other modes (0, 1) will be needed.
+ */
+ dev_err(&client->dev,
+ "Malformed zinitix,mode property, must be 2 (supplied: %d)\n",
+ bt541->zinitix_mode);
+ return -EINVAL;
+ }
+
+ irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
+ error = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, zinitix_ts_irq_handler,
+ IRQF_ONESHOT, client->name, bt541);
+ if (error) {
+ dev_err(&client->dev, "Failed to request IRQ: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int __maybe_unused zinitix_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bt541_ts_data *bt541 = i2c_get_clientdata(client);
+
+ mutex_lock(&bt541->input_dev->mutex);
+
+ if (bt541->input_dev->users)
+ zinitix_stop(bt541);
+
+ mutex_unlock(&bt541->input_dev->mutex);
+
+ return 0;
+}
+
+static int __maybe_unused zinitix_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bt541_ts_data *bt541 = i2c_get_clientdata(client);
+ int ret = 0;
+
+ mutex_lock(&bt541->input_dev->mutex);
+
+ if (bt541->input_dev->users)
+ ret = zinitix_start(bt541);
+
+ mutex_unlock(&bt541->input_dev->mutex);
+
+ return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(zinitix_pm_ops, zinitix_suspend, zinitix_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id zinitix_of_match[] = {
+ { .compatible = "zinitix,bt541" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, zinitix_of_match);
+#endif
+
+static struct i2c_driver zinitix_ts_driver = {
+ .probe_new = zinitix_ts_probe,
+ .driver = {
+ .name = "Zinitix-TS",
+ .pm = &zinitix_pm_ops,
+ .of_match_table = of_match_ptr(zinitix_of_match),
+ },
+};
+module_i2c_driver(zinitix_ts_driver);
+
+MODULE_AUTHOR("Michael Srba <Michael.Srba@seznam.cz>");
+MODULE_DESCRIPTION("Zinitix touchscreen driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 80e3a84..94c2885 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -17,7 +17,6 @@
obj-$(CONFIG_ARCH_MMP) += irq-mmp.o
obj-$(CONFIG_IRQ_MXS) += irq-mxs.o
obj-$(CONFIG_ARCH_TEGRA) += irq-tegra.o
-obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o
obj-$(CONFIG_DW_APB_ICTL) += irq-dw-apb-ictl.o
obj-$(CONFIG_CLPS711X_IRQCHIP) += irq-clps711x.o
obj-$(CONFIG_OMPIC) += irq-ompic.o
diff --git a/drivers/lightnvm/core.c b/drivers/lightnvm/core.c
index fe78bf0..c1bcac7 100644
--- a/drivers/lightnvm/core.c
+++ b/drivers/lightnvm/core.c
@@ -1311,8 +1311,9 @@ static long nvm_ioctl_get_devices(struct file *file, void __user *arg)
strlcpy(info->bmname, "gennvm", sizeof(info->bmname));
i++;
- if (i > 31) {
- pr_err("max 31 devices can be reported.\n");
+ if (i >= ARRAY_SIZE(devices->info)) {
+ pr_err("max %zd devices can be reported.\n",
+ ARRAY_SIZE(devices->info));
break;
}
}
diff --git a/drivers/mailbox/tegra-hsp.c b/drivers/mailbox/tegra-hsp.c
index 834b35d..e07091d 100644
--- a/drivers/mailbox/tegra-hsp.c
+++ b/drivers/mailbox/tegra-hsp.c
@@ -13,6 +13,8 @@
#include <linux/pm.h>
#include <linux/slab.h>
+#include <soc/tegra/fuse.h>
+
#include <dt-bindings/mailbox/tegra186-hsp.h>
#include "mailbox.h"
@@ -322,7 +324,12 @@ static int tegra_hsp_doorbell_startup(struct mbox_chan *chan)
if (!ccplex)
return -ENODEV;
- if (!tegra_hsp_doorbell_can_ring(db))
+ /*
+ * On simulation platforms the BPMP hasn't had a chance yet to mark
+ * the doorbell as ringable by the CCPLEX, so we want to skip extra
+ * checks here.
+ */
+ if (tegra_is_silicon() && !tegra_hsp_doorbell_can_ring(db))
return -ENODEV;
spin_lock_irqsave(&hsp->lock, flags);
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index 2c79e95..00e013b 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -32,8 +32,9 @@
config ATMEL_SDRAMC
bool "Atmel (Multi-port DDR-)SDRAM Controller"
- default y
- depends on ARCH_AT91 && OF
+ default y if ARCH_AT91
+ depends on ARCH_AT91 || COMPILE_TEST
+ depends on OF
help
This driver is for Atmel SDRAM Controller or Atmel Multi-port
DDR-SDRAM Controller available on Atmel AT91SAM9 and SAMA5 SoCs.
@@ -42,8 +43,9 @@
config ATMEL_EBI
bool "Atmel EBI driver"
- default y
- depends on ARCH_AT91 && OF
+ default y if ARCH_AT91
+ depends on ARCH_AT91 || COMPILE_TEST
+ depends on OF
select MFD_SYSCON
select MFD_ATMEL_SMC
help
@@ -52,6 +54,18 @@
tree is used. This bus supports NANDs, external ethernet controller,
SRAMs, ATA devices, etc.
+config BRCMSTB_DPFE
+ bool "Broadcom STB DPFE driver" if COMPILE_TEST
+ default y if ARCH_BRCMSTB
+ depends on ARCH_BRCMSTB || COMPILE_TEST
+ help
+ This driver provides access to the DPFE interface of Broadcom
+ STB SoCs. The firmware running on the DCPU inside the DDR PHY can
+ provide current information about the system's RAM, for instance
+ the DRAM refresh rate. This can be used as an indirect indicator
+ for the DRAM's temperature. Slower refresh rate means cooler RAM,
+ higher refresh rate means hotter RAM.
+
config BT1_L2_CTL
bool "Baikal-T1 CM2 L2-RAM Cache Control Block"
depends on MIPS_BAIKAL_T1 || COMPILE_TEST
@@ -65,7 +79,8 @@
config TI_AEMIF
tristate "Texas Instruments AEMIF driver"
- depends on (ARCH_DAVINCI || ARCH_KEYSTONE) && OF
+ depends on ARCH_DAVINCI || ARCH_KEYSTONE || COMPILE_TEST
+ depends on OF
help
This driver is for the AEMIF module available in Texas Instruments
SoCs. AEMIF stands for Asynchronous External Memory Interface and
@@ -76,7 +91,7 @@
config TI_EMIF
tristate "Texas Instruments EMIF driver"
- depends on ARCH_OMAP2PLUS
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
select DDR
help
This driver is for the EMIF module available in Texas Instruments
@@ -88,7 +103,8 @@
temperature changes
config OMAP_GPMC
- bool
+ bool "Texas Instruments OMAP SoC GPMC driver" if COMPILE_TEST
+ depends on OF_ADDRESS
select GPIOLIB
help
This driver is for the General Purpose Memory Controller (GPMC)
@@ -112,7 +128,8 @@
config TI_EMIF_SRAM
tristate "Texas Instruments EMIF SRAM driver"
- depends on (SOC_AM33XX || SOC_AM43XX) && SRAM
+ depends on SOC_AM33XX || SOC_AM43XX || (ARM && COMPILE_TEST)
+ depends on SRAM
help
This driver is for the EMIF module available on Texas Instruments
AM33XX and AM43XX SoCs and is required for PM. Certain parts of
@@ -122,8 +139,9 @@
config MVEBU_DEVBUS
bool "Marvell EBU Device Bus Controller"
- default y
- depends on PLAT_ORION && OF
+ default y if PLAT_ORION
+ depends on PLAT_ORION || COMPILE_TEST
+ depends on OF
help
This driver is for the Device Bus controller available in some
Marvell EBU SoCs such as Discovery (mv78xx0), Orion (88f5xxx) and
@@ -132,7 +150,7 @@
config FSL_CORENET_CF
tristate "Freescale CoreNet Error Reporting"
- depends on FSL_SOC_BOOKE
+ depends on FSL_SOC_BOOKE || COMPILE_TEST
help
Say Y for reporting of errors from the Freescale CoreNet
Coherency Fabric. Errors reported include accesses to
@@ -141,7 +159,7 @@
represents a coherency violation.
config FSL_IFC
- bool
+ bool "Freescale IFC driver" if COMPILE_TEST
depends on FSL_SOC || ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST
depends on HAS_IOMEM
@@ -155,7 +173,7 @@
memory devices such as NAND and SRAM.
config MTK_SMI
- bool
+ bool "Mediatek SoC Memory Controller driver" if COMPILE_TEST
depends on ARCH_MEDIATEK || COMPILE_TEST
help
This driver is for the Memory Controller module in MediaTek SoCs,
@@ -164,7 +182,7 @@
config DA8XX_DDRCTL
bool "Texas Instruments da8xx DDR2/mDDR driver"
- depends on ARCH_DAVINCI_DA8XX
+ depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
help
This driver is for the DDR2/mDDR Memory Controller present on
Texas Instruments da8xx SoCs. It's used to tweak various memory
@@ -172,16 +190,16 @@
config PL353_SMC
tristate "ARM PL35X Static Memory Controller(SMC) driver"
- default y
+ default y if ARM
depends on ARM
- depends on ARM_AMBA
+ depends on ARM_AMBA || COMPILE_TEST
help
This driver is for the ARM PL351/PL353 Static Memory
Controller(SMC) module.
config RENESAS_RPCIF
tristate "Renesas RPC-IF driver"
- depends on ARCH_RENESAS
+ depends on ARCH_RENESAS || COMPILE_TEST
select REGMAP_MMIO
help
This supports Renesas R-Car Gen3 RPC-IF which provides either SPI
diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
index b4533ff..e71cf7b 100644
--- a/drivers/memory/Makefile
+++ b/drivers/memory/Makefile
@@ -10,7 +10,7 @@
obj-$(CONFIG_ARM_PL172_MPMC) += pl172.o
obj-$(CONFIG_ATMEL_SDRAMC) += atmel-sdramc.o
obj-$(CONFIG_ATMEL_EBI) += atmel-ebi.o
-obj-$(CONFIG_ARCH_BRCMSTB) += brcmstb_dpfe.o
+obj-$(CONFIG_BRCMSTB_DPFE) += brcmstb_dpfe.o
obj-$(CONFIG_BT1_L2_CTL) += bt1-l2-ctl.o
obj-$(CONFIG_TI_AEMIF) += ti-aemif.o
obj-$(CONFIG_TI_EMIF) += emif.o
diff --git a/drivers/memory/brcmstb_dpfe.c b/drivers/memory/brcmstb_dpfe.c
index 60e8633..f43ba69 100644
--- a/drivers/memory/brcmstb_dpfe.c
+++ b/drivers/memory/brcmstb_dpfe.c
@@ -188,11 +188,6 @@ struct brcmstb_dpfe_priv {
struct mutex lock;
};
-static const char * const error_text[] = {
- "Success", "Header code incorrect", "Unknown command or argument",
- "Incorrect checksum", "Malformed command", "Timed out",
-};
-
/*
* Forward declaration of our sysfs attribute functions, so we can declare the
* attribute data structures early.
@@ -307,6 +302,20 @@ static const struct dpfe_api dpfe_api_v3 = {
},
};
+static const char *get_error_text(unsigned int i)
+{
+ static const char * const error_text[] = {
+ "Success", "Header code incorrect",
+ "Unknown command or argument", "Incorrect checksum",
+ "Malformed command", "Timed out", "Unknown error",
+ };
+
+ if (unlikely(i >= ARRAY_SIZE(error_text)))
+ i = ARRAY_SIZE(error_text) - 1;
+
+ return error_text[i];
+}
+
static bool is_dcpu_enabled(struct brcmstb_dpfe_priv *priv)
{
u32 val;
@@ -445,7 +454,7 @@ static int __send_command(struct brcmstb_dpfe_priv *priv, unsigned int cmd,
}
if (resp != 0) {
mutex_unlock(&priv->lock);
- return -ETIMEDOUT;
+ return -ffs(DCPU_RET_ERR_TIMEDOUT);
}
/* Compute checksum over the message */
@@ -647,8 +656,10 @@ static int brcmstb_dpfe_download_firmware(struct brcmstb_dpfe_priv *priv)
return (ret == -ENOENT) ? -EPROBE_DEFER : ret;
ret = __verify_firmware(&init, fw);
- if (ret)
- return -EFAULT;
+ if (ret) {
+ ret = -EFAULT;
+ goto release_fw;
+ }
__disable_dcpu(priv);
@@ -667,18 +678,20 @@ static int brcmstb_dpfe_download_firmware(struct brcmstb_dpfe_priv *priv)
ret = __write_firmware(priv->dmem, dmem, dmem_size, is_big_endian);
if (ret)
- return ret;
+ goto release_fw;
ret = __write_firmware(priv->imem, imem, imem_size, is_big_endian);
if (ret)
- return ret;
+ goto release_fw;
ret = __verify_fw_checksum(&init, priv, header, init.chksum);
if (ret)
- return ret;
+ goto release_fw;
__enable_dcpu(priv);
- return 0;
+release_fw:
+ release_firmware(fw);
+ return ret;
}
static ssize_t generic_show(unsigned int command, u32 response[],
@@ -691,7 +704,7 @@ static ssize_t generic_show(unsigned int command, u32 response[],
ret = __send_command(priv, command, response);
if (ret < 0)
- return sprintf(buf, "ERROR: %s\n", error_text[-ret]);
+ return sprintf(buf, "ERROR: %s\n", get_error_text(-ret));
return 0;
}
@@ -888,11 +901,8 @@ static int brcmstb_dpfe_probe(struct platform_device *pdev)
}
ret = brcmstb_dpfe_download_firmware(priv);
- if (ret) {
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "Couldn't download firmware -- %d\n", ret);
- return ret;
- }
+ if (ret)
+ return dev_err_probe(dev, ret, "Couldn't download firmware\n");
ret = sysfs_create_groups(&pdev->dev.kobj, priv->dpfe_api->sysfs_attrs);
if (!ret)
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index bb6a71d..ddb1879 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -131,16 +131,7 @@ static int emif_regdump_show(struct seq_file *s, void *unused)
return 0;
}
-static int emif_regdump_open(struct inode *inode, struct file *file)
-{
- return single_open(file, emif_regdump_show, inode->i_private);
-}
-
-static const struct file_operations emif_regdump_fops = {
- .open = emif_regdump_open,
- .read = seq_read,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(emif_regdump);
static int emif_mr4_show(struct seq_file *s, void *unused)
{
@@ -150,48 +141,16 @@ static int emif_mr4_show(struct seq_file *s, void *unused)
return 0;
}
-static int emif_mr4_open(struct inode *inode, struct file *file)
-{
- return single_open(file, emif_mr4_show, inode->i_private);
-}
-
-static const struct file_operations emif_mr4_fops = {
- .open = emif_mr4_open,
- .read = seq_read,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(emif_mr4);
static int __init_or_module emif_debugfs_init(struct emif_data *emif)
{
- struct dentry *dentry;
- int ret;
-
- dentry = debugfs_create_dir(dev_name(emif->dev), NULL);
- if (!dentry) {
- ret = -ENOMEM;
- goto err0;
- }
- emif->debugfs_root = dentry;
-
- dentry = debugfs_create_file("regcache_dump", S_IRUGO,
- emif->debugfs_root, emif, &emif_regdump_fops);
- if (!dentry) {
- ret = -ENOMEM;
- goto err1;
- }
-
- dentry = debugfs_create_file("mr4", S_IRUGO,
- emif->debugfs_root, emif, &emif_mr4_fops);
- if (!dentry) {
- ret = -ENOMEM;
- goto err1;
- }
-
+ emif->debugfs_root = debugfs_create_dir(dev_name(emif->dev), NULL);
+ debugfs_create_file("regcache_dump", S_IRUGO, emif->debugfs_root, emif,
+ &emif_regdump_fops);
+ debugfs_create_file("mr4", S_IRUGO, emif->debugfs_root, emif,
+ &emif_mr4_fops);
return 0;
-err1:
- debugfs_remove_recursive(emif->debugfs_root);
-err0:
- return ret;
}
static void __exit emif_debugfs_exit(struct emif_data *emif)
diff --git a/drivers/memory/fsl-corenet-cf.c b/drivers/memory/fsl-corenet-cf.c
index 0b0ed72..0309bd5 100644
--- a/drivers/memory/fsl-corenet-cf.c
+++ b/drivers/memory/fsl-corenet-cf.c
@@ -211,10 +211,8 @@ static int ccf_probe(struct platform_device *pdev)
dev_set_drvdata(&pdev->dev, ccf);
irq = platform_get_irq(pdev, 0);
- if (!irq) {
- dev_err(&pdev->dev, "%s: no irq\n", __func__);
- return -ENXIO;
- }
+ if (irq < 0)
+ return irq;
ret = devm_request_irq(&pdev->dev, irq, ccf_irq, 0, pdev->name, ccf);
if (ret) {
diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index c212625..691e4c3 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -19,6 +19,9 @@
/* mt8173 */
#define SMI_LARB_MMU_EN 0xf00
+/* mt8167 */
+#define MT8167_SMI_LARB_MMU_EN 0xfc0
+
/* mt2701 */
#define REG_SMI_SECUR_CON_BASE 0x5c0
@@ -179,6 +182,13 @@ static void mtk_smi_larb_config_port_mt8173(struct device *dev)
writel(*larb->mmu, larb->base + SMI_LARB_MMU_EN);
}
+static void mtk_smi_larb_config_port_mt8167(struct device *dev)
+{
+ struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+
+ writel(*larb->mmu, larb->base + MT8167_SMI_LARB_MMU_EN);
+}
+
static void mtk_smi_larb_config_port_gen1(struct device *dev)
{
struct mtk_smi_larb *larb = dev_get_drvdata(dev);
@@ -226,6 +236,11 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt8173 = {
.config_port = mtk_smi_larb_config_port_mt8173,
};
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8167 = {
+ /* mt8167 do not need the port in larb */
+ .config_port = mtk_smi_larb_config_port_mt8167,
+};
+
static const struct mtk_smi_larb_gen mtk_smi_larb_mt2701 = {
.port_in_larb = {
LARB0_PORT_OFFSET, LARB1_PORT_OFFSET,
@@ -255,6 +270,10 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
static const struct of_device_id mtk_smi_larb_of_ids[] = {
{
+ .compatible = "mediatek,mt8167-smi-larb",
+ .data = &mtk_smi_larb_mt8167
+ },
+ {
.compatible = "mediatek,mt8173-smi-larb",
.data = &mtk_smi_larb_mt8173
},
@@ -419,6 +438,10 @@ static const struct of_device_id mtk_smi_common_of_ids[] = {
.data = &mtk_smi_common_gen2,
},
{
+ .compatible = "mediatek,mt8167-smi-common",
+ .data = &mtk_smi_common_gen2,
+ },
+ {
.compatible = "mediatek,mt2701-smi-common",
.data = &mtk_smi_common_gen1,
},
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index ca00976..cfa730c 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -33,8 +33,6 @@
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <asm/mach-types.h>
-
#define DEVICE_NAME "omap-gpmc"
/* GPMC register offsets */
@@ -245,7 +243,6 @@ static DEFINE_SPINLOCK(gpmc_mem_lock);
/* Define chip-selects as reserved by default until probe completes */
static unsigned int gpmc_cs_num = GPMC_CS_NUM;
static unsigned int gpmc_nr_waitpins;
-static resource_size_t phys_base, mem_size;
static unsigned int gpmc_capability;
static void __iomem *gpmc_base;
@@ -634,14 +631,6 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, int max
return 0;
}
-#define GPMC_SET_ONE_CD_MAX(reg, st, end, max, field, cd) \
- if (set_gpmc_timing_reg(cs, (reg), (st), (end), (max), \
- t->field, (cd), #field) < 0) \
- return -1
-
-#define GPMC_SET_ONE(reg, st, end, field) \
- GPMC_SET_ONE_CD_MAX(reg, st, end, 0, field, GPMC_CD_FCLK)
-
/**
* gpmc_calc_waitmonitoring_divider - calculate proper GPMCFCLKDIVIDER based on WAITMONITORINGTIME
* WAITMONITORINGTIME will be _at least_ as long as desired, i.e.
@@ -700,12 +689,12 @@ int gpmc_calc_divider(unsigned int sync_clk)
int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t,
const struct gpmc_settings *s)
{
- int div;
+ int div, ret;
u32 l;
div = gpmc_calc_divider(t->sync_clk);
if (div < 0)
- return div;
+ return -EINVAL;
/*
* See if we need to change the divider for waitmonitoringtime.
@@ -729,57 +718,114 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t,
__func__,
t->wait_monitoring
);
- return -1;
+ return -ENXIO;
}
}
- GPMC_SET_ONE(GPMC_CS_CONFIG2, 0, 3, cs_on);
- GPMC_SET_ONE(GPMC_CS_CONFIG2, 8, 12, cs_rd_off);
- GPMC_SET_ONE(GPMC_CS_CONFIG2, 16, 20, cs_wr_off);
+ ret = 0;
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG2, 0, 3, 0, t->cs_on,
+ GPMC_CD_FCLK, "cs_on");
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG2, 8, 12, 0, t->cs_rd_off,
+ GPMC_CD_FCLK, "cs_rd_off");
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG2, 16, 20, 0, t->cs_wr_off,
+ GPMC_CD_FCLK, "cs_wr_off");
+ if (ret)
+ return -ENXIO;
- GPMC_SET_ONE(GPMC_CS_CONFIG3, 0, 3, adv_on);
- GPMC_SET_ONE(GPMC_CS_CONFIG3, 8, 12, adv_rd_off);
- GPMC_SET_ONE(GPMC_CS_CONFIG3, 16, 20, adv_wr_off);
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG3, 0, 3, 0, t->adv_on,
+ GPMC_CD_FCLK, "adv_on");
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG3, 8, 12, 0, t->adv_rd_off,
+ GPMC_CD_FCLK, "adv_rd_off");
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG3, 16, 20, 0, t->adv_wr_off,
+ GPMC_CD_FCLK, "adv_wr_off");
+ if (ret)
+ return -ENXIO;
+
if (gpmc_capability & GPMC_HAS_MUX_AAD) {
- GPMC_SET_ONE(GPMC_CS_CONFIG3, 4, 6, adv_aad_mux_on);
- GPMC_SET_ONE(GPMC_CS_CONFIG3, 24, 26, adv_aad_mux_rd_off);
- GPMC_SET_ONE(GPMC_CS_CONFIG3, 28, 30, adv_aad_mux_wr_off);
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG3, 4, 6, 0,
+ t->adv_aad_mux_on, GPMC_CD_FCLK,
+ "adv_aad_mux_on");
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG3, 24, 26, 0,
+ t->adv_aad_mux_rd_off, GPMC_CD_FCLK,
+ "adv_aad_mux_rd_off");
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG3, 28, 30, 0,
+ t->adv_aad_mux_wr_off, GPMC_CD_FCLK,
+ "adv_aad_mux_wr_off");
+ if (ret)
+ return -ENXIO;
}
- GPMC_SET_ONE(GPMC_CS_CONFIG4, 0, 3, oe_on);
- GPMC_SET_ONE(GPMC_CS_CONFIG4, 8, 12, oe_off);
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG4, 0, 3, 0, t->oe_on,
+ GPMC_CD_FCLK, "oe_on");
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG4, 8, 12, 0, t->oe_off,
+ GPMC_CD_FCLK, "oe_off");
if (gpmc_capability & GPMC_HAS_MUX_AAD) {
- GPMC_SET_ONE(GPMC_CS_CONFIG4, 4, 6, oe_aad_mux_on);
- GPMC_SET_ONE(GPMC_CS_CONFIG4, 13, 15, oe_aad_mux_off);
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG4, 4, 6, 0,
+ t->oe_aad_mux_on, GPMC_CD_FCLK,
+ "oe_aad_mux_on");
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG4, 13, 15, 0,
+ t->oe_aad_mux_off, GPMC_CD_FCLK,
+ "oe_aad_mux_off");
}
- GPMC_SET_ONE(GPMC_CS_CONFIG4, 16, 19, we_on);
- GPMC_SET_ONE(GPMC_CS_CONFIG4, 24, 28, we_off);
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG4, 16, 19, 0, t->we_on,
+ GPMC_CD_FCLK, "we_on");
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG4, 24, 28, 0, t->we_off,
+ GPMC_CD_FCLK, "we_off");
+ if (ret)
+ return -ENXIO;
- GPMC_SET_ONE(GPMC_CS_CONFIG5, 0, 4, rd_cycle);
- GPMC_SET_ONE(GPMC_CS_CONFIG5, 8, 12, wr_cycle);
- GPMC_SET_ONE(GPMC_CS_CONFIG5, 16, 20, access);
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG5, 0, 4, 0, t->rd_cycle,
+ GPMC_CD_FCLK, "rd_cycle");
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG5, 8, 12, 0, t->wr_cycle,
+ GPMC_CD_FCLK, "wr_cycle");
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG5, 16, 20, 0, t->access,
+ GPMC_CD_FCLK, "access");
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG5, 24, 27, 0,
+ t->page_burst_access, GPMC_CD_FCLK,
+ "page_burst_access");
+ if (ret)
+ return -ENXIO;
- GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG6, 0, 3, 0,
+ t->bus_turnaround, GPMC_CD_FCLK,
+ "bus_turnaround");
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG6, 8, 11, 0,
+ t->cycle2cycle_delay, GPMC_CD_FCLK,
+ "cycle2cycle_delay");
+ if (ret)
+ return -ENXIO;
- GPMC_SET_ONE(GPMC_CS_CONFIG6, 0, 3, bus_turnaround);
- GPMC_SET_ONE(GPMC_CS_CONFIG6, 8, 11, cycle2cycle_delay);
-
- if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS)
- GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
- if (gpmc_capability & GPMC_HAS_WR_ACCESS)
- GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access);
+ if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS) {
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG6, 16, 19, 0,
+ t->wr_data_mux_bus, GPMC_CD_FCLK,
+ "wr_data_mux_bus");
+ if (ret)
+ return -ENXIO;
+ }
+ if (gpmc_capability & GPMC_HAS_WR_ACCESS) {
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG6, 24, 28, 0,
+ t->wr_access, GPMC_CD_FCLK,
+ "wr_access");
+ if (ret)
+ return -ENXIO;
+ }
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
l &= ~0x03;
l |= (div - 1);
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l);
- GPMC_SET_ONE_CD_MAX(GPMC_CS_CONFIG1, 18, 19,
- GPMC_CONFIG1_WAITMONITORINGTIME_MAX,
- wait_monitoring, GPMC_CD_CLK);
- GPMC_SET_ONE_CD_MAX(GPMC_CS_CONFIG1, 25, 26,
- GPMC_CONFIG1_CLKACTIVATIONTIME_MAX,
- clk_activation, GPMC_CD_FCLK);
+ ret = 0;
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG1, 18, 19,
+ GPMC_CONFIG1_WAITMONITORINGTIME_MAX,
+ t->wait_monitoring, GPMC_CD_CLK,
+ "wait_monitoring");
+ ret |= set_gpmc_timing_reg(cs, GPMC_CS_CONFIG1, 25, 26,
+ GPMC_CONFIG1_CLKACTIVATIONTIME_MAX,
+ t->clk_activation, GPMC_CD_FCLK,
+ "clk_activation");
+ if (ret)
+ return -ENXIO;
#ifdef CONFIG_OMAP_GPMC_DEBUG
pr_info("GPMC CS%d CLK period is %lu ns (div %d)\n",
@@ -870,20 +916,6 @@ static bool gpmc_cs_reserved(int cs)
return gpmc->flags & GPMC_CS_RESERVED;
}
-static void gpmc_cs_set_name(int cs, const char *name)
-{
- struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
-
- gpmc->name = name;
-}
-
-static const char *gpmc_cs_get_name(int cs)
-{
- struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
-
- return gpmc->name;
-}
-
static unsigned long gpmc_mem_align(unsigned long size)
{
int order;
@@ -929,56 +961,13 @@ static int gpmc_cs_delete_mem(int cs)
return r;
}
-/**
- * gpmc_cs_remap - remaps a chip-select physical base address
- * @cs: chip-select to remap
- * @base: physical base address to re-map chip-select to
- *
- * Re-maps a chip-select to a new physical base address specified by
- * "base". Returns 0 on success and appropriate negative error code
- * on failure.
- */
-static int gpmc_cs_remap(int cs, u32 base)
-{
- int ret;
- u32 old_base, size;
-
- if (cs > gpmc_cs_num) {
- pr_err("%s: requested chip-select is disabled\n", __func__);
- return -ENODEV;
- }
-
- /*
- * Make sure we ignore any device offsets from the GPMC partition
- * allocated for the chip select and that the new base confirms
- * to the GPMC 16MB minimum granularity.
- */
- base &= ~(SZ_16M - 1);
-
- gpmc_cs_get_memconf(cs, &old_base, &size);
- if (base == old_base)
- return 0;
-
- ret = gpmc_cs_delete_mem(cs);
- if (ret < 0)
- return ret;
-
- ret = gpmc_cs_insert_mem(cs, base, size);
- if (ret < 0)
- return ret;
-
- ret = gpmc_cs_set_memconf(cs, base, size);
-
- return ret;
-}
-
int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
{
struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
struct resource *res = &gpmc->mem;
int r = -1;
- if (cs > gpmc_cs_num) {
+ if (cs >= gpmc_cs_num) {
pr_err("%s: requested chip-select is disabled\n", __func__);
return -ENODEV;
}
@@ -1025,8 +1014,7 @@ void gpmc_cs_free(int cs)
spin_lock(&gpmc_mem_lock);
if (cs >= gpmc_cs_num || cs < 0 || !gpmc_cs_reserved(cs)) {
- printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs);
- BUG();
+ WARN(1, "Trying to free non-reserved GPMC CS%d\n", cs);
spin_unlock(&gpmc_mem_lock);
return;
}
@@ -1896,6 +1884,63 @@ static const struct of_device_id gpmc_dt_ids[] = {
{ }
};
+static void gpmc_cs_set_name(int cs, const char *name)
+{
+ struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
+
+ gpmc->name = name;
+}
+
+static const char *gpmc_cs_get_name(int cs)
+{
+ struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
+
+ return gpmc->name;
+}
+
+/**
+ * gpmc_cs_remap - remaps a chip-select physical base address
+ * @cs: chip-select to remap
+ * @base: physical base address to re-map chip-select to
+ *
+ * Re-maps a chip-select to a new physical base address specified by
+ * "base". Returns 0 on success and appropriate negative error code
+ * on failure.
+ */
+static int gpmc_cs_remap(int cs, u32 base)
+{
+ int ret;
+ u32 old_base, size;
+
+ if (cs >= gpmc_cs_num) {
+ pr_err("%s: requested chip-select is disabled\n", __func__);
+ return -ENODEV;
+ }
+
+ /*
+ * Make sure we ignore any device offsets from the GPMC partition
+ * allocated for the chip select and that the new base confirms
+ * to the GPMC 16MB minimum granularity.
+ */
+ base &= ~(SZ_16M - 1);
+
+ gpmc_cs_get_memconf(cs, &old_base, &size);
+ if (base == old_base)
+ return 0;
+
+ ret = gpmc_cs_delete_mem(cs);
+ if (ret < 0)
+ return ret;
+
+ ret = gpmc_cs_insert_mem(cs, base, size);
+ if (ret < 0)
+ return ret;
+
+ ret = gpmc_cs_set_memconf(cs, base, size);
+
+ return ret;
+}
+
/**
* gpmc_read_settings_dt - read gpmc settings from device-tree
* @np: pointer to device-tree node for a gpmc child device
@@ -2265,6 +2310,10 @@ static void gpmc_probe_dt_children(struct platform_device *pdev)
}
}
#else
+void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p)
+{
+ memset(p, 0, sizeof(*p));
+}
static int gpmc_probe_dt(struct platform_device *pdev)
{
return 0;
@@ -2347,12 +2396,9 @@ static int gpmc_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, gpmc);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res == NULL)
+ if (!res)
return -ENOENT;
- phys_base = res->start;
- mem_size = resource_size(res);
-
gpmc_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(gpmc_base))
return PTR_ERR(gpmc_base);
diff --git a/drivers/memory/renesas-rpc-if.c b/drivers/memory/renesas-rpc-if.c
index 88f51ec..f2a33a1 100644
--- a/drivers/memory/renesas-rpc-if.c
+++ b/drivers/memory/renesas-rpc-if.c
@@ -199,10 +199,8 @@ int rpcif_sw_init(struct rpcif *rpc, struct device *dev)
rpc->dirmap = NULL;
rpc->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
- if (IS_ERR(rpc->rstc))
- return PTR_ERR(rpc->rstc);
- return 0;
+ return PTR_ERR_OR_ZERO(rpc->rstc);
}
EXPORT_SYMBOL(rpcif_sw_init);
diff --git a/drivers/memory/samsung/exynos5422-dmc.c b/drivers/memory/samsung/exynos5422-dmc.c
index 714d1f6..c5ee412 100644
--- a/drivers/memory/samsung/exynos5422-dmc.c
+++ b/drivers/memory/samsung/exynos5422-dmc.c
@@ -98,6 +98,8 @@ MODULE_PARM_DESC(irqmode, "Enable IRQ mode (0=off [default], 1=on)");
/**
* struct dmc_opp_table - Operating level desciption
+ * @freq_hz: target frequency in Hz
+ * @volt_uv: target voltage in uV
*
* Covers frequency and voltage settings of the DMC operating mode.
*/
@@ -108,6 +110,41 @@ struct dmc_opp_table {
/**
* struct exynos5_dmc - main structure describing DMC device
+ * @dev: DMC device
+ * @df: devfreq device structure returned by devfreq framework
+ * @gov_data: configuration of devfreq governor
+ * @base_drexi0: DREX0 registers mapping
+ * @base_drexi1: DREX1 registers mapping
+ * @clk_regmap: regmap for clock controller registers
+ * @lock: protects curr_rate and frequency/voltage setting section
+ * @curr_rate: current frequency
+ * @curr_volt: current voltage
+ * @opp: OPP table
+ * @opp_count: number of 'opp' elements
+ * @timings_arr_size: number of 'timings' elements
+ * @timing_row: values for timing row register, for each OPP
+ * @timing_data: values for timing data register, for each OPP
+ * @timing_power: balues for timing power register, for each OPP
+ * @timings: DDR memory timings, from device tree
+ * @min_tck: DDR memory minimum timing values, from device tree
+ * @bypass_timing_row: value for timing row register for bypass timings
+ * @bypass_timing_data: value for timing data register for bypass timings
+ * @bypass_timing_power: value for timing power register for bypass
+ * timings
+ * @vdd_mif: Memory interface regulator
+ * @fout_spll: clock: SPLL
+ * @fout_bpll: clock: BPLL
+ * @mout_spll: clock: mux SPLL
+ * @mout_bpll: clock: mux BPLL
+ * @mout_mclk_cdrex: clock: mux mclk_cdrex
+ * @mout_mx_mspll_ccore: clock: mux mx_mspll_ccore
+ * @counter: devfreq events
+ * @num_counters: number of 'counter' elements
+ * @last_overflow_ts: time (in ns) of last overflow of each DREX
+ * @load: utilization in percents
+ * @total: total time between devfreq events
+ * @in_irq_mode: whether running in interrupt mode (true)
+ * or polling (false)
*
* The main structure for the Dynamic Memory Controller which covers clocks,
* memory regions, HW information, parameters and current operating mode.
@@ -119,12 +156,11 @@ struct exynos5_dmc {
void __iomem *base_drexi0;
void __iomem *base_drexi1;
struct regmap *clk_regmap;
+ /* Protects curr_rate and frequency/voltage setting section */
struct mutex lock;
unsigned long curr_rate;
unsigned long curr_volt;
- unsigned long bypass_rate;
struct dmc_opp_table *opp;
- struct dmc_opp_table opp_bypass;
int opp_count;
u32 timings_arr_size;
u32 *timing_row;
@@ -142,8 +178,6 @@ struct exynos5_dmc {
struct clk *mout_bpll;
struct clk *mout_mclk_cdrex;
struct clk *mout_mx_mspll_ccore;
- struct clk *mx_mspll_ccore_phy;
- struct clk *mout_mx_mspll_ccore_phy;
struct devfreq_event_dev **counter;
int num_counters;
u64 last_overflow_ts[2];
@@ -169,7 +203,7 @@ struct timing_reg {
unsigned int val;
};
-static const struct timing_reg timing_row[] = {
+static const struct timing_reg timing_row_reg_fields[] = {
TIMING_FIELD("tRFC", 24, 31),
TIMING_FIELD("tRRD", 20, 23),
TIMING_FIELD("tRP", 16, 19),
@@ -178,7 +212,7 @@ static const struct timing_reg timing_row[] = {
TIMING_FIELD("tRAS", 0, 5),
};
-static const struct timing_reg timing_data[] = {
+static const struct timing_reg timing_data_reg_fields[] = {
TIMING_FIELD("tWTR", 28, 31),
TIMING_FIELD("tWR", 24, 27),
TIMING_FIELD("tRTP", 20, 23),
@@ -189,7 +223,7 @@ static const struct timing_reg timing_data[] = {
TIMING_FIELD("RL", 0, 3),
};
-static const struct timing_reg timing_power[] = {
+static const struct timing_reg timing_power_reg_fields[] = {
TIMING_FIELD("tFAW", 26, 31),
TIMING_FIELD("tXSR", 16, 25),
TIMING_FIELD("tXP", 8, 15),
@@ -197,8 +231,9 @@ static const struct timing_reg timing_power[] = {
TIMING_FIELD("tMRD", 0, 3),
};
-#define TIMING_COUNT (ARRAY_SIZE(timing_row) + ARRAY_SIZE(timing_data) + \
- ARRAY_SIZE(timing_power))
+#define TIMING_COUNT (ARRAY_SIZE(timing_row_reg_fields) + \
+ ARRAY_SIZE(timing_data_reg_fields) + \
+ ARRAY_SIZE(timing_power_reg_fields))
static int exynos5_counters_set_event(struct exynos5_dmc *dmc)
{
@@ -346,7 +381,6 @@ static int exynos5_init_freq_table(struct exynos5_dmc *dmc,
/**
* exynos5_set_bypass_dram_timings() - Low-level changes of the DRAM timings
* @dmc: device for which the new settings is going to be applied
- * @param: DRAM parameters which passes timing data
*
* Low-level function for changing timings for DRAM memory clocking from
* 'bypass' clock source (fixed frequency @400MHz).
@@ -453,9 +487,6 @@ static int exynos5_dmc_align_bypass_voltage(struct exynos5_dmc *dmc,
unsigned long target_volt)
{
int ret = 0;
- unsigned long bypass_volt = dmc->opp_bypass.volt_uv;
-
- target_volt = max(bypass_volt, target_volt);
if (dmc->curr_volt >= target_volt)
return 0;
@@ -617,6 +648,7 @@ exynos5_dmc_change_freq_and_volt(struct exynos5_dmc *dmc,
* requested
* @target_volt: returned voltage which corresponds to the returned
* frequency
+ * @flags: devfreq flags provided for this frequency change request
*
* Function gets requested frequency and checks OPP framework for needed
* frequency and voltage. It populates the values 'target_rate' and
@@ -908,7 +940,10 @@ static int exynos5_dmc_get_status(struct device *dev,
int ret;
if (dmc->in_irq_mode) {
+ mutex_lock(&dmc->lock);
stat->current_frequency = dmc->curr_rate;
+ mutex_unlock(&dmc->lock);
+
stat->busy_time = dmc->load;
stat->total_time = dmc->total;
} else {
@@ -950,7 +985,7 @@ static int exynos5_dmc_get_cur_freq(struct device *dev, unsigned long *freq)
return 0;
}
-/**
+/*
* exynos5_dmc_df_profile - Devfreq governor's profile structure
*
* It provides to the devfreq framework needed functions and polling period.
@@ -993,7 +1028,9 @@ exynos5_dmc_align_init_freq(struct exynos5_dmc *dmc,
/**
* create_timings_aligned() - Create register values and align with standard
* @dmc: device for which the frequency is going to be set
- * @idx: speed bin in the OPP table
+ * @reg_timing_row: array to fill with values for timing row register
+ * @reg_timing_data: array to fill with values for timing data register
+ * @reg_timing_power: array to fill with values for timing power register
* @clk_period_ps: the period of the clock, known as tCK
*
* The function calculates timings and creates a register value ready for
@@ -1018,117 +1055,117 @@ static int create_timings_aligned(struct exynos5_dmc *dmc, u32 *reg_timing_row,
val = dmc->timings->tRFC / clk_period_ps;
val += dmc->timings->tRFC % clk_period_ps ? 1 : 0;
val = max(val, dmc->min_tck->tRFC);
- reg = &timing_row[0];
+ reg = &timing_row_reg_fields[0];
*reg_timing_row |= TIMING_VAL2REG(reg, val);
val = dmc->timings->tRRD / clk_period_ps;
val += dmc->timings->tRRD % clk_period_ps ? 1 : 0;
val = max(val, dmc->min_tck->tRRD);
- reg = &timing_row[1];
+ reg = &timing_row_reg_fields[1];
*reg_timing_row |= TIMING_VAL2REG(reg, val);
val = dmc->timings->tRPab / clk_period_ps;
val += dmc->timings->tRPab % clk_period_ps ? 1 : 0;
val = max(val, dmc->min_tck->tRPab);
- reg = &timing_row[2];
+ reg = &timing_row_reg_fields[2];
*reg_timing_row |= TIMING_VAL2REG(reg, val);
val = dmc->timings->tRCD / clk_period_ps;
val += dmc->timings->tRCD % clk_period_ps ? 1 : 0;
val = max(val, dmc->min_tck->tRCD);
- reg = &timing_row[3];
+ reg = &timing_row_reg_fields[3];
*reg_timing_row |= TIMING_VAL2REG(reg, val);
val = dmc->timings->tRC / clk_period_ps;
val += dmc->timings->tRC % clk_period_ps ? 1 : 0;
val = max(val, dmc->min_tck->tRC);
- reg = &timing_row[4];
+ reg = &timing_row_reg_fields[4];
*reg_timing_row |= TIMING_VAL2REG(reg, val);
val = dmc->timings->tRAS / clk_period_ps;
val += dmc->timings->tRAS % clk_period_ps ? 1 : 0;
val = max(val, dmc->min_tck->tRAS);
- reg = &timing_row[5];
+ reg = &timing_row_reg_fields[5];
*reg_timing_row |= TIMING_VAL2REG(reg, val);
/* data related timings */
val = dmc->timings->tWTR / clk_period_ps;
val += dmc->timings->tWTR % clk_period_ps ? 1 : 0;
val = max(val, dmc->min_tck->tWTR);
- reg = &timing_data[0];
+ reg = &timing_data_reg_fields[0];
*reg_timing_data |= TIMING_VAL2REG(reg, val);
val = dmc->timings->tWR / clk_period_ps;
val += dmc->timings->tWR % clk_period_ps ? 1 : 0;
val = max(val, dmc->min_tck->tWR);
- reg = &timing_data[1];
+ reg = &timing_data_reg_fields[1];
*reg_timing_data |= TIMING_VAL2REG(reg, val);
val = dmc->timings->tRTP / clk_period_ps;
val += dmc->timings->tRTP % clk_period_ps ? 1 : 0;
val = max(val, dmc->min_tck->tRTP);
- reg = &timing_data[2];
+ reg = &timing_data_reg_fields[2];
*reg_timing_data |= TIMING_VAL2REG(reg, val);
val = dmc->timings->tW2W_C2C / clk_period_ps;
val += dmc->timings->tW2W_C2C % clk_period_ps ? 1 : 0;
val = max(val, dmc->min_tck->tW2W_C2C);
- reg = &timing_data[3];
+ reg = &timing_data_reg_fields[3];
*reg_timing_data |= TIMING_VAL2REG(reg, val);
val = dmc->timings->tR2R_C2C / clk_period_ps;
val += dmc->timings->tR2R_C2C % clk_period_ps ? 1 : 0;
val = max(val, dmc->min_tck->tR2R_C2C);
- reg = &timing_data[4];
+ reg = &timing_data_reg_fields[4];
*reg_timing_data |= TIMING_VAL2REG(reg, val);
val = dmc->timings->tWL / clk_period_ps;
val += dmc->timings->tWL % clk_period_ps ? 1 : 0;
val = max(val, dmc->min_tck->tWL);
- reg = &timing_data[5];
+ reg = &timing_data_reg_fields[5];
*reg_timing_data |= TIMING_VAL2REG(reg, val);
val = dmc->timings->tDQSCK / clk_period_ps;
val += dmc->timings->tDQSCK % clk_period_ps ? 1 : 0;
val = max(val, dmc->min_tck->tDQSCK);
- reg = &timing_data[6];
+ reg = &timing_data_reg_fields[6];
*reg_timing_data |= TIMING_VAL2REG(reg, val);
val = dmc->timings->tRL / clk_period_ps;
val += dmc->timings->tRL % clk_period_ps ? 1 : 0;
val = max(val, dmc->min_tck->tRL);
- reg = &timing_data[7];
+ reg = &timing_data_reg_fields[7];
*reg_timing_data |= TIMING_VAL2REG(reg, val);
/* power related timings */
val = dmc->timings->tFAW / clk_period_ps;
val += dmc->timings->tFAW % clk_period_ps ? 1 : 0;
val = max(val, dmc->min_tck->tFAW);
- reg = &timing_power[0];
+ reg = &timing_power_reg_fields[0];
*reg_timing_power |= TIMING_VAL2REG(reg, val);
val = dmc->timings->tXSR / clk_period_ps;
val += dmc->timings->tXSR % clk_period_ps ? 1 : 0;
val = max(val, dmc->min_tck->tXSR);
- reg = &timing_power[1];
+ reg = &timing_power_reg_fields[1];
*reg_timing_power |= TIMING_VAL2REG(reg, val);
val = dmc->timings->tXP / clk_period_ps;
val += dmc->timings->tXP % clk_period_ps ? 1 : 0;
val = max(val, dmc->min_tck->tXP);
- reg = &timing_power[2];
+ reg = &timing_power_reg_fields[2];
*reg_timing_power |= TIMING_VAL2REG(reg, val);
val = dmc->timings->tCKE / clk_period_ps;
val += dmc->timings->tCKE % clk_period_ps ? 1 : 0;
val = max(val, dmc->min_tck->tCKE);
- reg = &timing_power[3];
+ reg = &timing_power_reg_fields[3];
*reg_timing_power |= TIMING_VAL2REG(reg, val);
val = dmc->timings->tMRD / clk_period_ps;
val += dmc->timings->tMRD % clk_period_ps ? 1 : 0;
val = max(val, dmc->min_tck->tMRD);
- reg = &timing_power[4];
+ reg = &timing_power_reg_fields[4];
*reg_timing_power |= TIMING_VAL2REG(reg, val);
return 0;
@@ -1263,8 +1300,6 @@ static int exynos5_dmc_init_clks(struct exynos5_dmc *dmc)
clk_set_parent(dmc->mout_mx_mspll_ccore, dmc->mout_spll);
- dmc->bypass_rate = clk_get_rate(dmc->mout_mx_mspll_ccore);
-
clk_prepare_enable(dmc->fout_bpll);
clk_prepare_enable(dmc->mout_bpll);
@@ -1332,7 +1367,6 @@ static int exynos5_performance_counters_init(struct exynos5_dmc *dmc)
/**
* exynos5_dmc_set_pause_on_switching() - Controls a pause feature in DMC
* @dmc: device which is used for changing this feature
- * @set: a boolean state passing enable/disable request
*
* There is a need of pausing DREX DMC when divider or MUX in clock tree
* changes its configuration. In such situation access to the memory is blocked
diff --git a/drivers/memory/tegra/tegra124-emc.c b/drivers/memory/tegra/tegra124-emc.c
index ba5cb1f..76ace42 100644
--- a/drivers/memory/tegra/tegra124-emc.c
+++ b/drivers/memory/tegra/tegra124-emc.c
@@ -1060,19 +1060,7 @@ static int tegra_emc_debug_available_rates_show(struct seq_file *s,
return 0;
}
-static int tegra_emc_debug_available_rates_open(struct inode *inode,
- struct file *file)
-{
- return single_open(file, tegra_emc_debug_available_rates_show,
- inode->i_private);
-}
-
-static const struct file_operations tegra_emc_debug_available_rates_fops = {
- .open = tegra_emc_debug_available_rates_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(tegra_emc_debug_available_rates);
static int tegra_emc_debug_min_rate_get(void *data, u64 *rate)
{
diff --git a/drivers/memory/tegra/tegra124.c b/drivers/memory/tegra/tegra124.c
index 493b5dc..0cede24 100644
--- a/drivers/memory/tegra/tegra124.c
+++ b/drivers/memory/tegra/tegra124.c
@@ -957,7 +957,6 @@ static const struct tegra_smmu_swgroup tegra124_swgroups[] = {
static const unsigned int tegra124_group_drm[] = {
TEGRA_SWGROUP_DC,
TEGRA_SWGROUP_DCB,
- TEGRA_SWGROUP_GPU,
TEGRA_SWGROUP_VIC,
};
diff --git a/drivers/memory/tegra/tegra186-emc.c b/drivers/memory/tegra/tegra186-emc.c
index 8478f59..fa8af17 100644
--- a/drivers/memory/tegra/tegra186-emc.c
+++ b/drivers/memory/tegra/tegra186-emc.c
@@ -172,14 +172,8 @@ static int tegra186_emc_probe(struct platform_device *pdev)
return -ENOMEM;
emc->bpmp = tegra_bpmp_get(&pdev->dev);
- if (IS_ERR(emc->bpmp)) {
- err = PTR_ERR(emc->bpmp);
-
- if (err != -EPROBE_DEFER)
- dev_err(&pdev->dev, "failed to get BPMP: %d\n", err);
-
- return err;
- }
+ if (IS_ERR(emc->bpmp))
+ return dev_err_probe(&pdev->dev, PTR_ERR(emc->bpmp), "failed to get BPMP\n");
emc->clk = devm_clk_get(&pdev->dev, "emc");
if (IS_ERR(emc->clk)) {
diff --git a/drivers/memory/tegra/tegra210-emc-cc-r21021.c b/drivers/memory/tegra/tegra210-emc-cc-r21021.c
index ff55a17..0ebfa8e 100644
--- a/drivers/memory/tegra/tegra210-emc-cc-r21021.c
+++ b/drivers/memory/tegra/tegra210-emc-cc-r21021.c
@@ -501,7 +501,6 @@ static u32 tegra210_emc_r21021_periodic_compensation(struct tegra210_emc *emc)
emc_cfg_o = emc_readl(emc, EMC_CFG);
emc_cfg = emc_cfg_o & ~(EMC_CFG_DYN_SELF_REF |
EMC_CFG_DRAM_ACPD |
- EMC_CFG_DRAM_CLKSTOP_PD |
EMC_CFG_DRAM_CLKSTOP_PD);
@@ -1044,7 +1043,7 @@ static void tegra210_emc_r21021_set_clock(struct tegra210_emc *emc, u32 clksrc)
!opt_cc_short_zcal && opt_short_zcal) {
value = (value & ~(EMC_ZCAL_WAIT_CNT_ZCAL_WAIT_CNT_MASK <<
EMC_ZCAL_WAIT_CNT_ZCAL_WAIT_CNT_SHIFT)) |
- ((zq_wait_long & EMC_ZCAL_WAIT_CNT_ZCAL_WAIT_CNT_MASK) <<
+ ((zq_wait_long & EMC_ZCAL_WAIT_CNT_ZCAL_WAIT_CNT_MASK) <<
EMC_MRS_WAIT_CNT_SHORT_WAIT_SHIFT);
} else if (offset == EMC_ZCAL_INTERVAL && opt_zcal_en_cc) {
value = 0; /* EMC_ZCAL_INTERVAL reset value. */
diff --git a/drivers/memory/tegra/tegra210.c b/drivers/memory/tegra/tegra210.c
index 7212d1d..7fb8b54 100644
--- a/drivers/memory/tegra/tegra210.c
+++ b/drivers/memory/tegra/tegra210.c
@@ -842,7 +842,7 @@ static const struct tegra_mc_client tegra210_mc_clients[] = {
},
.la = {
.reg = 0x3dc,
- .shift = 0,
+ .shift = 16,
.mask = 0xff,
.def = 0x80,
},
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index f0cb7ae..31481c9 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -302,7 +302,7 @@
config MMC_SDHCI_S3C
tristate "SDHCI support on Samsung S3C SoC"
depends on MMC_SDHCI
- depends on PLAT_SAMSUNG || COMPILE_TEST
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
help
This selects the Secure Digital Host Controller Interface (SDHCI)
often referrered to as the HSMMC block in some of the Samsung S3C
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index e3698ab..643d54e 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -24,11 +24,6 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/mmc/slot-gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <mach/dma.h>
-#include <mach/gpio-samsung.h>
-
#include <linux/platform_data/mmc-s3cmci.h>
#include "s3cmci.h"
@@ -305,7 +300,8 @@ static inline void clear_imask(struct s3cmci_host *host)
static void s3cmci_check_sdio_irq(struct s3cmci_host *host)
{
if (host->sdio_irqen) {
- if (gpio_get_value(S3C2410_GPE(8)) == 0) {
+ if (host->pdata->bus[3] &&
+ gpiod_get_value(host->pdata->bus[3]) == 0) {
pr_debug("%s: signalling irq\n", __func__);
mmc_signal_sdio_irq(host->mmc);
}
@@ -1201,33 +1197,20 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
switch (ios->power_mode) {
case MMC_POWER_ON:
case MMC_POWER_UP:
- /* Configure GPE5...GPE10 pins in SD mode */
- if (!host->pdev->dev.of_node)
- s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
-
- if (host->pdata->set_power)
- host->pdata->set_power(ios->power_mode, ios->vdd);
-
if (!host->is2440)
mci_con |= S3C2410_SDICON_FIFORESET;
-
break;
case MMC_POWER_OFF:
default:
- if (!host->pdev->dev.of_node)
- gpio_direction_output(S3C2410_GPE(5), 0);
-
if (host->is2440)
mci_con |= S3C2440_SDICON_SDRESET;
-
- if (host->pdata->set_power)
- host->pdata->set_power(ios->power_mode, ios->vdd);
-
break;
}
+ if (host->pdata->set_power)
+ host->pdata->set_power(ios->power_mode, ios->vdd);
+
s3cmci_set_clk(host, ios);
/* Set CLOCK_ENABLE */
@@ -1305,13 +1288,6 @@ static const struct mmc_host_ops s3cmci_ops = {
.enable_sdio_irq = s3cmci_enable_sdio_irq,
};
-static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
- /* This is currently here to avoid a number of if (host->pdata)
- * checks. Any zero fields to ensure reasonable defaults are picked. */
- .no_wprotect = 1,
- .no_detect = 1,
-};
-
#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
static int s3cmci_cpufreq_transition(struct notifier_block *nb,
@@ -1465,23 +1441,20 @@ static int s3cmci_probe_pdata(struct s3cmci_host *host)
int i, ret;
host->is2440 = platform_get_device_id(pdev)->driver_data;
-
- for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) {
- ret = gpio_request(i, dev_name(&pdev->dev));
- if (ret) {
- dev_err(&pdev->dev, "failed to get gpio %d\n", i);
-
- for (i--; i >= S3C2410_GPE(5); i--)
- gpio_free(i);
-
- return ret;
- }
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "need platform data");
+ return -ENXIO;
}
- if (!pdev->dev.platform_data)
- pdev->dev.platform_data = &s3cmci_def_pdata;
-
- pdata = pdev->dev.platform_data;
+ for (i = 0; i < 6; i++) {
+ pdata->bus[i] = devm_gpiod_get_index(&pdev->dev, "bus", i,
+ GPIOD_OUT_LOW);
+ if (IS_ERR(pdata->bus[i])) {
+ dev_err(&pdev->dev, "failed to get gpio %d\n", i);
+ return PTR_ERR(pdata->bus[i]);
+ }
+ }
if (pdata->no_wprotect)
mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
@@ -1537,7 +1510,6 @@ static int s3cmci_probe(struct platform_device *pdev)
struct s3cmci_host *host;
struct mmc_host *mmc;
int ret;
- int i;
mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
if (!mmc) {
@@ -1581,7 +1553,7 @@ static int s3cmci_probe(struct platform_device *pdev)
"failed to get io memory region resource.\n");
ret = -ENOENT;
- goto probe_free_gpio;
+ goto probe_free_host;
}
host->mem = request_mem_region(host->mem->start,
@@ -1590,7 +1562,7 @@ static int s3cmci_probe(struct platform_device *pdev)
if (!host->mem) {
dev_err(&pdev->dev, "failed to request io memory region.\n");
ret = -ENOENT;
- goto probe_free_gpio;
+ goto probe_free_host;
}
host->base = ioremap(host->mem->start, resource_size(host->mem));
@@ -1714,11 +1686,6 @@ static int s3cmci_probe(struct platform_device *pdev)
probe_free_mem_region:
release_mem_region(host->mem->start, resource_size(host->mem));
- probe_free_gpio:
- if (!pdev->dev.of_node)
- for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
- gpio_free(i);
-
probe_free_host:
mmc_free_host(mmc);
@@ -1744,7 +1711,6 @@ static int s3cmci_remove(struct platform_device *pdev)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
struct s3cmci_host *host = mmc_priv(mmc);
- int i;
s3cmci_shutdown(pdev);
@@ -1757,10 +1723,6 @@ static int s3cmci_remove(struct platform_device *pdev)
free_irq(host->irq, host);
- if (!pdev->dev.of_node)
- for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
- gpio_free(i);
-
iounmap(host->base);
release_mem_region(host->mem->start, resource_size(host->mem));
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 0b5b2b3..1e9a0ad 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -54,7 +54,7 @@ static void bcm_sf2_recalc_clock(struct dsa_switch *ds)
unsigned long new_rate;
unsigned int ports_active;
/* Frequenty in Mhz */
- const unsigned long rate_table[] = {
+ static const unsigned long rate_table[] = {
59220000,
60820000,
62500000,
diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c
index 76576cf..1d420c4 100644
--- a/drivers/net/dsa/ocelot/seville_vsc9953.c
+++ b/drivers/net/dsa/ocelot/seville_vsc9953.c
@@ -1181,7 +1181,7 @@ static const struct felix_info seville_info_vsc9953 = {
.stats_layout = vsc9953_stats_layout,
.num_stats = ARRAY_SIZE(vsc9953_stats_layout),
.vcap = vsc9953_vcap_props,
- .shared_queue_sz = 2048 * 1024,
+ .shared_queue_sz = 256 * 1024,
.num_mact_rows = 2048,
.num_ports = 10,
.mdio_bus_alloc = vsc9953_mdio_bus_alloc,
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
index 0f865da..bf5e0e9 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
@@ -1163,7 +1163,6 @@ int aq_nic_set_link_ksettings(struct aq_nic_s *self,
default:
err = -1;
goto err_exit;
- break;
}
if (!(self->aq_nic_cfg.aq_hw_caps->link_speed_msk & rate)) {
err = -1;
diff --git a/drivers/net/ethernet/chelsio/inline_crypto/Kconfig b/drivers/net/ethernet/chelsio/inline_crypto/Kconfig
index 7dfa573..bc06e83 100644
--- a/drivers/net/ethernet/chelsio/inline_crypto/Kconfig
+++ b/drivers/net/ethernet/chelsio/inline_crypto/Kconfig
@@ -16,6 +16,7 @@
config CRYPTO_DEV_CHELSIO_TLS
tristate "Chelsio Crypto Inline TLS Driver"
depends on CHELSIO_T4
+ depends on TLS
depends on TLS_TOE
help
Support Chelsio Inline TLS with Chelsio crypto accelerator.
diff --git a/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c b/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c
index 05520dc..ec4f790 100644
--- a/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c
+++ b/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c
@@ -92,11 +92,13 @@ static void chtls_sock_release(struct kref *ref)
static struct net_device *chtls_find_netdev(struct chtls_dev *cdev,
struct sock *sk)
{
+ struct adapter *adap = pci_get_drvdata(cdev->pdev);
struct net_device *ndev = cdev->ports[0];
#if IS_ENABLED(CONFIG_IPV6)
struct net_device *temp;
int addr_type;
#endif
+ int i;
switch (sk->sk_family) {
case PF_INET:
@@ -127,8 +129,12 @@ static struct net_device *chtls_find_netdev(struct chtls_dev *cdev,
return NULL;
if (is_vlan_dev(ndev))
- return vlan_dev_real_dev(ndev);
- return ndev;
+ ndev = vlan_dev_real_dev(ndev);
+
+ for_each_port(adap, i)
+ if (cdev->ports[i] == ndev)
+ return ndev;
+ return NULL;
}
static void assign_rxopt(struct sock *sk, unsigned int opt)
@@ -477,7 +483,6 @@ void chtls_destroy_sock(struct sock *sk)
chtls_purge_write_queue(sk);
free_tls_keyid(sk);
kref_put(&csk->kref, chtls_sock_release);
- csk->cdev = NULL;
if (sk->sk_family == AF_INET)
sk->sk_prot = &tcp_prot;
#if IS_ENABLED(CONFIG_IPV6)
@@ -736,14 +741,13 @@ void chtls_listen_stop(struct chtls_dev *cdev, struct sock *sk)
#if IS_ENABLED(CONFIG_IPV6)
if (sk->sk_family == PF_INET6) {
- struct chtls_sock *csk;
+ struct net_device *ndev = chtls_find_netdev(cdev, sk);
int addr_type = 0;
- csk = rcu_dereference_sk_user_data(sk);
addr_type = ipv6_addr_type((const struct in6_addr *)
&sk->sk_v6_rcv_saddr);
if (addr_type != IPV6_ADDR_ANY)
- cxgb4_clip_release(csk->egress_dev, (const u32 *)
+ cxgb4_clip_release(ndev, (const u32 *)
&sk->sk_v6_rcv_saddr, 1);
}
#endif
@@ -1157,6 +1161,9 @@ static struct sock *chtls_recv_sock(struct sock *lsk,
ndev = n->dev;
if (!ndev)
goto free_dst;
+ if (is_vlan_dev(ndev))
+ ndev = vlan_dev_real_dev(ndev);
+
port_id = cxgb4_port_idx(ndev);
csk = chtls_sock_create(cdev);
diff --git a/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_io.c b/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_io.c
index 2e9acae..9fb5ca6 100644
--- a/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_io.c
+++ b/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_io.c
@@ -902,9 +902,9 @@ static int chtls_skb_copy_to_page_nocache(struct sock *sk,
return 0;
}
-static int csk_mem_free(struct chtls_dev *cdev, struct sock *sk)
+static bool csk_mem_free(struct chtls_dev *cdev, struct sock *sk)
{
- return (cdev->max_host_sndbuf - sk->sk_wmem_queued);
+ return (cdev->max_host_sndbuf - sk->sk_wmem_queued > 0);
}
static int csk_wait_memory(struct chtls_dev *cdev,
@@ -1240,6 +1240,7 @@ int chtls_sendpage(struct sock *sk, struct page *page,
copied = 0;
csk = rcu_dereference_sk_user_data(sk);
cdev = csk->cdev;
+ lock_sock(sk);
timeo = sock_sndtimeo(sk, flags & MSG_DONTWAIT);
err = sk_stream_wait_connect(sk, &timeo);
diff --git a/drivers/net/ethernet/cisco/enic/enic_ethtool.c b/drivers/net/ethernet/cisco/enic/enic_ethtool.c
index a4dd52b..1a9803f 100644
--- a/drivers/net/ethernet/cisco/enic/enic_ethtool.c
+++ b/drivers/net/ethernet/cisco/enic/enic_ethtool.c
@@ -434,7 +434,6 @@ static int enic_grxclsrule(struct enic *enic, struct ethtool_rxnfc *cmd)
break;
default:
return -EINVAL;
- break;
}
fsp->h_u.tcp_ip4_spec.ip4src = flow_get_u32_src(&n->keys);
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 8723620..00024dd 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1817,6 +1817,11 @@ static int ftgmac100_probe(struct platform_device *pdev)
priv->rxdes0_edorr_mask = BIT(30);
priv->txdes0_edotr_mask = BIT(30);
priv->is_aspeed = true;
+ /* Disable ast2600 problematic HW arbitration */
+ if (of_device_is_compatible(np, "aspeed,ast2600-mac")) {
+ iowrite32(FTGMAC100_TM_DEFAULT,
+ priv->base + FTGMAC100_OFFSET_TM);
+ }
} else {
priv->rxdes0_edorr_mask = BIT(15);
priv->txdes0_edotr_mask = BIT(15);
diff --git a/drivers/net/ethernet/faraday/ftgmac100.h b/drivers/net/ethernet/faraday/ftgmac100.h
index e5876a3..63b3e02 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.h
+++ b/drivers/net/ethernet/faraday/ftgmac100.h
@@ -170,6 +170,14 @@
#define FTGMAC100_MACCR_SW_RST (1 << 31)
/*
+ * test mode control register
+ */
+#define FTGMAC100_TM_RQ_TX_VALID_DIS (1 << 28)
+#define FTGMAC100_TM_RQ_RR_IDLE_PREV (1 << 27)
+#define FTGMAC100_TM_DEFAULT \
+ (FTGMAC100_TM_RQ_TX_VALID_DIS | FTGMAC100_TM_RQ_RR_IDLE_PREV)
+
+/*
* PHY control register
*/
#define FTGMAC100_PHYCR_MDC_CYCTHR_MASK 0x3f
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 1f7fe6b..8148f79 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -4235,8 +4235,13 @@ static int handle_change_mac_rsp(union ibmvnic_crq *crq,
dev_err(dev, "Error %ld in CHANGE_MAC_ADDR_RSP\n", rc);
goto out;
}
+ /* crq->change_mac_addr.mac_addr is the requested one
+ * crq->change_mac_addr_rsp.mac_addr is the returned valid one.
+ */
ether_addr_copy(netdev->dev_addr,
&crq->change_mac_addr_rsp.mac_addr[0]);
+ ether_addr_copy(adapter->mac_addr,
+ &crq->change_mac_addr_rsp.mac_addr[0]);
out:
complete(&adapter->fw_done);
return rc;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index f77fa3e..fc389ee 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -901,15 +901,13 @@ static bool ixgbe_x550em_a_has_mii(struct ixgbe_hw *hw)
**/
s32 ixgbe_mii_bus_init(struct ixgbe_hw *hw)
{
+ s32 (*write)(struct mii_bus *bus, int addr, int regnum, u16 val);
+ s32 (*read)(struct mii_bus *bus, int addr, int regnum);
struct ixgbe_adapter *adapter = hw->back;
struct pci_dev *pdev = adapter->pdev;
struct device *dev = &adapter->netdev->dev;
struct mii_bus *bus;
- bus = devm_mdiobus_alloc(dev);
- if (!bus)
- return -ENOMEM;
-
switch (hw->device_id) {
/* C3000 SoCs */
case IXGBE_DEV_ID_X550EM_A_KR:
@@ -922,16 +920,23 @@ s32 ixgbe_mii_bus_init(struct ixgbe_hw *hw)
case IXGBE_DEV_ID_X550EM_A_1G_T:
case IXGBE_DEV_ID_X550EM_A_1G_T_L:
if (!ixgbe_x550em_a_has_mii(hw))
- return -ENODEV;
- bus->read = &ixgbe_x550em_a_mii_bus_read;
- bus->write = &ixgbe_x550em_a_mii_bus_write;
+ return 0;
+ read = &ixgbe_x550em_a_mii_bus_read;
+ write = &ixgbe_x550em_a_mii_bus_write;
break;
default:
- bus->read = &ixgbe_mii_bus_read;
- bus->write = &ixgbe_mii_bus_write;
+ read = &ixgbe_mii_bus_read;
+ write = &ixgbe_mii_bus_write;
break;
}
+ bus = devm_mdiobus_alloc(dev);
+ if (!bus)
+ return -ENOMEM;
+
+ bus->read = read;
+ bus->write = write;
+
/* Use the position of the device in the PCI hierarchy as the id */
snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mdio-%s", ixgbe_driver_name,
pci_name(pdev));
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
index de563cf..4b93ba1 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
@@ -350,7 +350,6 @@ static s32 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
if (ixgbe_read_eerd_generic(hw, pointer, &length)) {
hw_dbg(hw, "EEPROM read failed\n");
return IXGBE_ERR_EEPROM;
- break;
}
/* Skip pointer section if length is invalid. */
diff --git a/drivers/net/ethernet/korina.c b/drivers/net/ethernet/korina.c
index af441d6..bf48f0d 100644
--- a/drivers/net/ethernet/korina.c
+++ b/drivers/net/ethernet/korina.c
@@ -1113,7 +1113,7 @@ static int korina_probe(struct platform_device *pdev)
return rc;
probe_err_register:
- kfree(KSEG0ADDR(lp->td_ring));
+ kfree((struct dma_desc *)KSEG0ADDR(lp->td_ring));
probe_err_td_ring:
iounmap(lp->tx_dma_regs);
probe_err_dma_tx:
@@ -1133,7 +1133,7 @@ static int korina_remove(struct platform_device *pdev)
iounmap(lp->eth_regs);
iounmap(lp->rx_dma_regs);
iounmap(lp->tx_dma_regs);
- kfree(KSEG0ADDR(lp->td_ring));
+ kfree((struct dma_desc *)KSEG0ADDR(lp->td_ring));
unregister_netdev(bif->dev);
free_netdev(bif->dev);
diff --git a/drivers/net/ethernet/mediatek/Kconfig b/drivers/net/ethernet/mediatek/Kconfig
index 62a820b..3362b14 100644
--- a/drivers/net/ethernet/mediatek/Kconfig
+++ b/drivers/net/ethernet/mediatek/Kconfig
@@ -17,6 +17,7 @@
config NET_MEDIATEK_STAR_EMAC
tristate "MediaTek STAR Ethernet MAC support"
select PHYLIB
+ select REGMAP_MMIO
help
This driver supports the ethernet MAC IP first used on
MediaTek MT85** SoCs.
diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 7d366b0..3b6ddc7 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -4694,7 +4694,7 @@ static int rtl8169_close(struct net_device *dev)
phy_disconnect(tp->phydev);
- pci_free_irq(pdev, 0, tp);
+ free_irq(pci_irq_vector(pdev, 0), tp);
dma_free_coherent(&pdev->dev, R8169_RX_RING_BYTES, tp->RxDescArray,
tp->RxPhyAddr);
@@ -4745,8 +4745,8 @@ static int rtl_open(struct net_device *dev)
rtl_request_firmware(tp);
- retval = pci_request_irq(pdev, 0, rtl8169_interrupt, NULL, tp,
- dev->name);
+ retval = request_irq(pci_irq_vector(pdev, 0), rtl8169_interrupt,
+ IRQF_NO_THREAD | IRQF_SHARED, dev->name, tp);
if (retval < 0)
goto err_release_fw_2;
@@ -4763,7 +4763,7 @@ static int rtl_open(struct net_device *dev)
return retval;
err_free_irq:
- pci_free_irq(pdev, 0, tp);
+ free_irq(pci_irq_vector(pdev, 0), tp);
err_release_fw_2:
rtl_release_firmware(tp);
rtl8169_rx_clear(tp);
diff --git a/drivers/net/ethernet/sfc/efx_common.c b/drivers/net/ethernet/sfc/efx_common.c
index 72a3f0e..de797e1 100644
--- a/drivers/net/ethernet/sfc/efx_common.c
+++ b/drivers/net/ethernet/sfc/efx_common.c
@@ -1014,6 +1014,7 @@ int efx_init_struct(struct efx_nic *efx,
efx->num_mac_stats = MC_CMD_MAC_NSTATS;
BUILD_BUG_ON(MC_CMD_MAC_NSTATS - 1 != MC_CMD_MAC_GENERATION_END);
mutex_init(&efx->mac_lock);
+ init_rwsem(&efx->filter_sem);
#ifdef CONFIG_RFS_ACCEL
mutex_init(&efx->rps_mutex);
spin_lock_init(&efx->rps_hash_lock);
diff --git a/drivers/net/ethernet/sfc/rx_common.c b/drivers/net/ethernet/sfc/rx_common.c
index 5e29284..19cf7ca 100644
--- a/drivers/net/ethernet/sfc/rx_common.c
+++ b/drivers/net/ethernet/sfc/rx_common.c
@@ -797,7 +797,6 @@ int efx_probe_filters(struct efx_nic *efx)
{
int rc;
- init_rwsem(&efx->filter_sem);
mutex_lock(&efx->mac_lock);
down_write(&efx->filter_sem);
rc = efx->type->filter_table_probe(efx);
diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c
index 806eb65..1503cc9 100644
--- a/drivers/net/ethernet/socionext/netsec.c
+++ b/drivers/net/ethernet/socionext/netsec.c
@@ -6,6 +6,7 @@
#include <linux/pm_runtime.h>
#include <linux/acpi.h>
#include <linux/of_mdio.h>
+#include <linux/of_net.h>
#include <linux/etherdevice.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -1833,6 +1834,14 @@ static const struct net_device_ops netsec_netdev_ops = {
static int netsec_of_probe(struct platform_device *pdev,
struct netsec_priv *priv, u32 *phy_addr)
{
+ int err;
+
+ err = of_get_phy_mode(pdev->dev.of_node, &priv->phy_interface);
+ if (err) {
+ dev_err(&pdev->dev, "missing required property 'phy-mode'\n");
+ return err;
+ }
+
priv->phy_np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
if (!priv->phy_np) {
dev_err(&pdev->dev, "missing required property 'phy-handle'\n");
@@ -1859,6 +1868,14 @@ static int netsec_acpi_probe(struct platform_device *pdev,
if (!IS_ENABLED(CONFIG_ACPI))
return -ENODEV;
+ /* ACPI systems are assumed to configure the PHY in firmware, so
+ * there is really no need to discover the PHY mode from the DSDT.
+ * Since firmware is known to exist in the field that configures the
+ * PHY correctly but passes the wrong mode string in the phy-mode
+ * device property, we have no choice but to ignore it.
+ */
+ priv->phy_interface = PHY_INTERFACE_MODE_NA;
+
ret = device_property_read_u32(&pdev->dev, "phy-channel", phy_addr);
if (ret) {
dev_err(&pdev->dev,
@@ -1995,13 +2012,6 @@ static int netsec_probe(struct platform_device *pdev)
priv->msg_enable = NETIF_MSG_TX_ERR | NETIF_MSG_HW | NETIF_MSG_DRV |
NETIF_MSG_LINK | NETIF_MSG_PROBE;
- priv->phy_interface = device_get_phy_mode(&pdev->dev);
- if ((int)priv->phy_interface < 0) {
- dev_err(&pdev->dev, "missing required property 'phy-mode'\n");
- ret = -ENODEV;
- goto free_ndev;
- }
-
priv->ioaddr = devm_ioremap(&pdev->dev, mmio_res->start,
resource_size(mmio_res));
if (!priv->ioaddr) {
diff --git a/drivers/net/pcs/Kconfig b/drivers/net/pcs/Kconfig
index 074fb3f..22ba7b0 100644
--- a/drivers/net/pcs/Kconfig
+++ b/drivers/net/pcs/Kconfig
@@ -7,8 +7,7 @@
config PCS_XPCS
tristate "Synopsys DesignWare XPCS controller"
- select MDIO_BUS
- depends on MDIO_DEVICE
+ depends on MDIO_DEVICE && MDIO_BUS
help
This module provides helper functions for Synopsys DesignWare XPCS
controllers.
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index f020401..bf8a605 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -261,7 +261,7 @@ static void set_ethernet_addr(rtl8150_t *dev)
ret = get_registers(dev, IDR, sizeof(node_id), node_id);
- if (ret == sizeof(node_id)) {
+ if (!ret) {
ether_addr_copy(dev->netdev->dev_addr, node_id);
} else {
eth_hw_addr_random(dev->netdev);
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index d2d2c4a..21b7114 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -68,8 +68,6 @@ static const unsigned long guest_offloads[] = {
(1ULL << VIRTIO_NET_F_GUEST_ECN) | \
(1ULL << VIRTIO_NET_F_GUEST_UFO))
-#define GUEST_OFFLOAD_CSUM_MASK (1ULL << VIRTIO_NET_F_GUEST_CSUM)
-
struct virtnet_stat_desc {
char desc[ETH_GSTRING_LEN];
size_t offset;
@@ -2524,48 +2522,29 @@ static int virtnet_get_phys_port_name(struct net_device *dev, char *buf,
return 0;
}
-static netdev_features_t virtnet_fix_features(struct net_device *netdev,
- netdev_features_t features)
-{
- /* If Rx checksum is disabled, LRO should also be disabled. */
- if (!(features & NETIF_F_RXCSUM))
- features &= ~NETIF_F_LRO;
-
- return features;
-}
-
static int virtnet_set_features(struct net_device *dev,
netdev_features_t features)
{
struct virtnet_info *vi = netdev_priv(dev);
- u64 offloads = vi->guest_offloads;
+ u64 offloads;
int err;
- /* Don't allow configuration while XDP is active. */
- if (vi->xdp_queue_pairs)
- return -EBUSY;
-
if ((dev->features ^ features) & NETIF_F_LRO) {
+ if (vi->xdp_queue_pairs)
+ return -EBUSY;
+
if (features & NETIF_F_LRO)
- offloads |= GUEST_OFFLOAD_LRO_MASK &
- vi->guest_offloads_capable;
+ offloads = vi->guest_offloads_capable;
else
- offloads &= ~GUEST_OFFLOAD_LRO_MASK;
+ offloads = vi->guest_offloads_capable &
+ ~GUEST_OFFLOAD_LRO_MASK;
+
+ err = virtnet_set_guest_offloads(vi, offloads);
+ if (err)
+ return err;
+ vi->guest_offloads = offloads;
}
- if ((dev->features ^ features) & NETIF_F_RXCSUM) {
- if (features & NETIF_F_RXCSUM)
- offloads |= GUEST_OFFLOAD_CSUM_MASK &
- vi->guest_offloads_capable;
- else
- offloads &= ~GUEST_OFFLOAD_CSUM_MASK;
- }
-
- err = virtnet_set_guest_offloads(vi, offloads);
- if (err)
- return err;
-
- vi->guest_offloads = offloads;
return 0;
}
@@ -2584,7 +2563,6 @@ static const struct net_device_ops virtnet_netdev = {
.ndo_features_check = passthru_features_check,
.ndo_get_phys_port_name = virtnet_get_phys_port_name,
.ndo_set_features = virtnet_set_features,
- .ndo_fix_features = virtnet_fix_features,
};
static void virtnet_config_changed_work(struct work_struct *work)
@@ -3035,10 +3013,8 @@ static int virtnet_probe(struct virtio_device *vdev)
if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4) ||
virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO6))
dev->features |= NETIF_F_LRO;
- if (virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_GUEST_OFFLOADS)) {
- dev->hw_features |= NETIF_F_RXCSUM;
+ if (virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_GUEST_OFFLOADS))
dev->hw_features |= NETIF_F_LRO;
- }
dev->vlan_features = dev->features;
diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c
index 9b00708..1bdd3df 100644
--- a/drivers/net/wan/hdlc.c
+++ b/drivers/net/wan/hdlc.c
@@ -46,7 +46,15 @@ static struct hdlc_proto *first_proto;
static int hdlc_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *p, struct net_device *orig_dev)
{
- struct hdlc_device *hdlc = dev_to_hdlc(dev);
+ struct hdlc_device *hdlc;
+
+ /* First make sure "dev" is an HDLC device */
+ if (!(dev->priv_flags & IFF_WAN_HDLC)) {
+ kfree_skb(skb);
+ return NET_RX_SUCCESS;
+ }
+
+ hdlc = dev_to_hdlc(dev);
if (!net_eq(dev_net(dev), &init_net)) {
kfree_skb(skb);
diff --git a/drivers/net/wan/hdlc_raw_eth.c b/drivers/net/wan/hdlc_raw_eth.c
index 08e0a46..c70a518 100644
--- a/drivers/net/wan/hdlc_raw_eth.c
+++ b/drivers/net/wan/hdlc_raw_eth.c
@@ -99,6 +99,7 @@ static int raw_eth_ioctl(struct net_device *dev, struct ifreq *ifr)
old_qlen = dev->tx_queue_len;
ether_setup(dev);
dev->tx_queue_len = old_qlen;
+ dev->priv_flags &= ~IFF_TX_SKB_SHARING;
eth_hw_addr_random(dev);
call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev);
netif_dormant_off(dev);
diff --git a/drivers/net/wan/lmc/lmc_proto.c b/drivers/net/wan/lmc/lmc_proto.c
index e8b0b90..4e9cc83 100644
--- a/drivers/net/wan/lmc/lmc_proto.c
+++ b/drivers/net/wan/lmc/lmc_proto.c
@@ -89,17 +89,13 @@ __be16 lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/
switch(sc->if_type){
case LMC_PPP:
return hdlc_type_trans(skb, sc->lmc_device);
- break;
case LMC_NET:
return htons(ETH_P_802_2);
- break;
case LMC_RAW: /* Packet type for skbuff kind of useless */
return htons(ETH_P_802_2);
- break;
default:
printk(KERN_WARNING "%s: No protocol set for this interface, assuming 802.2 (which is wrong!!)\n", sc->name);
return htons(ETH_P_802_2);
- break;
}
}
diff --git a/drivers/nfc/st21nfca/core.c b/drivers/nfc/st21nfca/core.c
index 2ce1793..6ca0d2f 100644
--- a/drivers/nfc/st21nfca/core.c
+++ b/drivers/nfc/st21nfca/core.c
@@ -794,7 +794,6 @@ static int st21nfca_hci_im_transceive(struct nfc_hci_dev *hdev,
skb->len,
st21nfca_hci_data_exchange_cb,
info);
- break;
default:
return 1;
}
diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c
index 3bd97c7..c70f62fe 100644
--- a/drivers/nfc/trf7970a.c
+++ b/drivers/nfc/trf7970a.c
@@ -1382,7 +1382,6 @@ static int trf7970a_is_iso15693_write_or_lock(u8 cmd)
case ISO15693_CMD_WRITE_DSFID:
case ISO15693_CMD_LOCK_DSFID:
return 1;
- break;
default:
return 0;
}
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 56e2a22..95ef494 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -248,6 +248,10 @@ static blk_status_t nvme_error_status(u16 status)
return BLK_STS_NEXUS;
case NVME_SC_HOST_PATH_ERROR:
return BLK_STS_TRANSPORT;
+ case NVME_SC_ZONE_TOO_MANY_ACTIVE:
+ return BLK_STS_ZONE_ACTIVE_RESOURCE;
+ case NVME_SC_ZONE_TOO_MANY_OPEN:
+ return BLK_STS_ZONE_OPEN_RESOURCE;
default:
return BLK_STS_IOERR;
}
diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c
index e2e09e2..3c002bd 100644
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -26,6 +26,10 @@ enum nvme_fc_queue_flags {
};
#define NVME_FC_DEFAULT_DEV_LOSS_TMO 60 /* seconds */
+#define NVME_FC_DEFAULT_RECONNECT_TMO 2 /* delay between reconnects
+ * when connected and a
+ * connection failure.
+ */
struct nvme_fc_queue {
struct nvme_fc_ctrl *ctrl;
@@ -1837,8 +1841,10 @@ __nvme_fc_abort_op(struct nvme_fc_ctrl *ctrl, struct nvme_fc_fcp_op *op)
opstate = atomic_xchg(&op->state, FCPOP_STATE_ABORTED);
if (opstate != FCPOP_STATE_ACTIVE)
atomic_set(&op->state, opstate);
- else if (test_bit(FCCTRL_TERMIO, &ctrl->flags))
+ else if (test_bit(FCCTRL_TERMIO, &ctrl->flags)) {
+ op->flags |= FCOP_FLAGS_TERMIO;
ctrl->iocnt++;
+ }
spin_unlock_irqrestore(&ctrl->lock, flags);
if (opstate != FCPOP_STATE_ACTIVE)
@@ -1874,7 +1880,8 @@ __nvme_fc_fcpop_chk_teardowns(struct nvme_fc_ctrl *ctrl,
if (opstate == FCPOP_STATE_ABORTED) {
spin_lock_irqsave(&ctrl->lock, flags);
- if (test_bit(FCCTRL_TERMIO, &ctrl->flags)) {
+ if (test_bit(FCCTRL_TERMIO, &ctrl->flags) &&
+ op->flags & FCOP_FLAGS_TERMIO) {
if (!--ctrl->iocnt)
wake_up(&ctrl->ioabort_wait);
}
@@ -2314,7 +2321,7 @@ nvme_fc_create_hw_io_queues(struct nvme_fc_ctrl *ctrl, u16 qsize)
return 0;
delete_queues:
- for (; i >= 0; i--)
+ for (; i > 0; i--)
__nvme_fc_delete_hw_queue(ctrl, &ctrl->queues[i], i);
return ret;
}
@@ -2433,7 +2440,7 @@ nvme_fc_error_recovery(struct nvme_fc_ctrl *ctrl, char *errmsg)
return;
dev_warn(ctrl->ctrl.device,
- "NVME-FC{%d}: transport association error detected: %s\n",
+ "NVME-FC{%d}: transport association event: %s\n",
ctrl->cnum, errmsg);
dev_warn(ctrl->ctrl.device,
"NVME-FC{%d}: resetting controller\n", ctrl->cnum);
@@ -2446,15 +2453,20 @@ nvme_fc_timeout(struct request *rq, bool reserved)
{
struct nvme_fc_fcp_op *op = blk_mq_rq_to_pdu(rq);
struct nvme_fc_ctrl *ctrl = op->ctrl;
+ struct nvme_fc_cmd_iu *cmdiu = &op->cmd_iu;
+ struct nvme_command *sqe = &cmdiu->sqe;
/*
- * we can't individually ABTS an io without affecting the queue,
- * thus killing the queue, and thus the association.
- * So resolve by performing a controller reset, which will stop
- * the host/io stack, terminate the association on the link,
- * and recreate an association on the link.
+ * Attempt to abort the offending command. Command completion
+ * will detect the aborted io and will fail the connection.
*/
- nvme_fc_error_recovery(ctrl, "io timeout error");
+ dev_info(ctrl->ctrl.device,
+ "NVME-FC{%d.%d}: io timeout: opcode %d fctype %d w10/11: "
+ "x%08x/x%08x\n",
+ ctrl->cnum, op->queue->qnum, sqe->common.opcode,
+ sqe->connect.fctype, sqe->common.cdw10, sqe->common.cdw11);
+ if (__nvme_fc_abort_op(ctrl, op))
+ nvme_fc_error_recovery(ctrl, "io timeout abort failed");
/*
* the io abort has been initiated. Have the reset timer
@@ -2726,6 +2738,7 @@ nvme_fc_complete_rq(struct request *rq)
struct nvme_fc_ctrl *ctrl = op->ctrl;
atomic_set(&op->state, FCPOP_STATE_IDLE);
+ op->flags &= ~FCOP_FLAGS_TERMIO;
nvme_fc_unmap_data(ctrl, rq, op);
nvme_complete_rq(rq);
@@ -2876,11 +2889,14 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl)
if (ret)
goto out_delete_hw_queues;
- if (prior_ioq_cnt != nr_io_queues)
+ if (prior_ioq_cnt != nr_io_queues) {
dev_info(ctrl->ctrl.device,
"reconnect: revising io queue count from %d to %d\n",
prior_ioq_cnt, nr_io_queues);
- blk_mq_update_nr_hw_queues(&ctrl->tag_set, nr_io_queues);
+ nvme_wait_freeze(&ctrl->ctrl);
+ blk_mq_update_nr_hw_queues(&ctrl->tag_set, nr_io_queues);
+ nvme_unfreeze(&ctrl->ctrl);
+ }
return 0;
@@ -3090,6 +3106,61 @@ nvme_fc_create_association(struct nvme_fc_ctrl *ctrl)
return ret;
}
+
+/*
+ * This routine runs through all outstanding commands on the association
+ * and aborts them. This routine is typically be called by the
+ * delete_association routine. It is also called due to an error during
+ * reconnect. In that scenario, it is most likely a command that initializes
+ * the controller, including fabric Connect commands on io queues, that
+ * may have timed out or failed thus the io must be killed for the connect
+ * thread to see the error.
+ */
+static void
+__nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues)
+{
+ /*
+ * If io queues are present, stop them and terminate all outstanding
+ * ios on them. As FC allocates FC exchange for each io, the
+ * transport must contact the LLDD to terminate the exchange,
+ * thus releasing the FC exchange. We use blk_mq_tagset_busy_itr()
+ * to tell us what io's are busy and invoke a transport routine
+ * to kill them with the LLDD. After terminating the exchange
+ * the LLDD will call the transport's normal io done path, but it
+ * will have an aborted status. The done path will return the
+ * io requests back to the block layer as part of normal completions
+ * (but with error status).
+ */
+ if (ctrl->ctrl.queue_count > 1) {
+ nvme_stop_queues(&ctrl->ctrl);
+ blk_mq_tagset_busy_iter(&ctrl->tag_set,
+ nvme_fc_terminate_exchange, &ctrl->ctrl);
+ blk_mq_tagset_wait_completed_request(&ctrl->tag_set);
+ if (start_queues)
+ nvme_start_queues(&ctrl->ctrl);
+ }
+
+ /*
+ * Other transports, which don't have link-level contexts bound
+ * to sqe's, would try to gracefully shutdown the controller by
+ * writing the registers for shutdown and polling (call
+ * nvme_shutdown_ctrl()). Given a bunch of i/o was potentially
+ * just aborted and we will wait on those contexts, and given
+ * there was no indication of how live the controlelr is on the
+ * link, don't send more io to create more contexts for the
+ * shutdown. Let the controller fail via keepalive failure if
+ * its still present.
+ */
+
+ /*
+ * clean up the admin queue. Same thing as above.
+ */
+ blk_mq_quiesce_queue(ctrl->ctrl.admin_q);
+ blk_mq_tagset_busy_iter(&ctrl->admin_tag_set,
+ nvme_fc_terminate_exchange, &ctrl->ctrl);
+ blk_mq_tagset_wait_completed_request(&ctrl->admin_tag_set);
+}
+
/*
* This routine stops operation of the controller on the host side.
* On the host os stack side: Admin and IO queues are stopped,
@@ -3110,46 +3181,7 @@ nvme_fc_delete_association(struct nvme_fc_ctrl *ctrl)
ctrl->iocnt = 0;
spin_unlock_irqrestore(&ctrl->lock, flags);
- /*
- * If io queues are present, stop them and terminate all outstanding
- * ios on them. As FC allocates FC exchange for each io, the
- * transport must contact the LLDD to terminate the exchange,
- * thus releasing the FC exchange. We use blk_mq_tagset_busy_itr()
- * to tell us what io's are busy and invoke a transport routine
- * to kill them with the LLDD. After terminating the exchange
- * the LLDD will call the transport's normal io done path, but it
- * will have an aborted status. The done path will return the
- * io requests back to the block layer as part of normal completions
- * (but with error status).
- */
- if (ctrl->ctrl.queue_count > 1) {
- nvme_stop_queues(&ctrl->ctrl);
- blk_mq_tagset_busy_iter(&ctrl->tag_set,
- nvme_fc_terminate_exchange, &ctrl->ctrl);
- blk_mq_tagset_wait_completed_request(&ctrl->tag_set);
- }
-
- /*
- * Other transports, which don't have link-level contexts bound
- * to sqe's, would try to gracefully shutdown the controller by
- * writing the registers for shutdown and polling (call
- * nvme_shutdown_ctrl()). Given a bunch of i/o was potentially
- * just aborted and we will wait on those contexts, and given
- * there was no indication of how live the controlelr is on the
- * link, don't send more io to create more contexts for the
- * shutdown. Let the controller fail via keepalive failure if
- * its still present.
- */
-
- /*
- * clean up the admin queue. Same thing as above.
- * use blk_mq_tagset_busy_itr() and the transport routine to
- * terminate the exchanges.
- */
- blk_mq_quiesce_queue(ctrl->ctrl.admin_q);
- blk_mq_tagset_busy_iter(&ctrl->admin_tag_set,
- nvme_fc_terminate_exchange, &ctrl->ctrl);
- blk_mq_tagset_wait_completed_request(&ctrl->admin_tag_set);
+ __nvme_fc_abort_outstanding_ios(ctrl, false);
/* kill the aens as they are a separate path */
nvme_fc_abort_aen_ops(ctrl);
@@ -3263,22 +3295,27 @@ static void
__nvme_fc_terminate_io(struct nvme_fc_ctrl *ctrl)
{
/*
- * if state is connecting - the error occurred as part of a
- * reconnect attempt. The create_association error paths will
- * clean up any outstanding io.
- *
- * if it's a different state - ensure all pending io is
- * terminated. Given this can delay while waiting for the
- * aborted io to return, we recheck adapter state below
- * before changing state.
+ * if state is CONNECTING - the error occurred as part of a
+ * reconnect attempt. Abort any ios on the association and
+ * let the create_association error paths resolve things.
*/
- if (ctrl->ctrl.state != NVME_CTRL_CONNECTING) {
- nvme_stop_keep_alive(&ctrl->ctrl);
-
- /* will block will waiting for io to terminate */
- nvme_fc_delete_association(ctrl);
+ if (ctrl->ctrl.state == NVME_CTRL_CONNECTING) {
+ __nvme_fc_abort_outstanding_ios(ctrl, true);
+ return;
}
+ /*
+ * For any other state, kill the association. As this routine
+ * is a common io abort routine for resetting and such, after
+ * the association is terminated, ensure that the state is set
+ * to CONNECTING.
+ */
+
+ nvme_stop_keep_alive(&ctrl->ctrl);
+
+ /* will block will waiting for io to terminate */
+ nvme_fc_delete_association(ctrl);
+
if (ctrl->ctrl.state != NVME_CTRL_CONNECTING &&
!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_CONNECTING))
dev_err(ctrl->ctrl.device,
@@ -3403,7 +3440,7 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts,
{
struct nvme_fc_ctrl *ctrl;
unsigned long flags;
- int ret, idx;
+ int ret, idx, ctrl_loss_tmo;
if (!(rport->remoteport.port_role &
(FC_PORT_ROLE_NVME_DISCOVERY | FC_PORT_ROLE_NVME_TARGET))) {
@@ -3429,6 +3466,19 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts,
goto out_free_ctrl;
}
+ /*
+ * if ctrl_loss_tmo is being enforced and the default reconnect delay
+ * is being used, change to a shorter reconnect delay for FC.
+ */
+ if (opts->max_reconnects != -1 &&
+ opts->reconnect_delay == NVMF_DEF_RECONNECT_DELAY &&
+ opts->reconnect_delay > NVME_FC_DEFAULT_RECONNECT_TMO) {
+ ctrl_loss_tmo = opts->max_reconnects * opts->reconnect_delay;
+ opts->reconnect_delay = NVME_FC_DEFAULT_RECONNECT_TMO;
+ opts->max_reconnects = DIV_ROUND_UP(ctrl_loss_tmo,
+ opts->reconnect_delay);
+ }
+
ctrl->ctrl.opts = opts;
ctrl->ctrl.nr_reconnects = 0;
if (lport->dev)
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index e7c88b4..cc11113 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -176,7 +176,7 @@ static inline struct nvme_request *nvme_req(struct request *req)
static inline u16 nvme_req_qid(struct request *req)
{
- if (!req->rq_disk)
+ if (!req->q->queuedata)
return 0;
return blk_mq_unique_tag_to_hwq(blk_mq_unique_tag(req)) + 1;
}
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index e5b0224..df8f361 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -3185,6 +3185,8 @@ static const struct pci_device_id nvme_id_table[] = {
NVME_QUIRK_IGNORE_DEV_SUBNQN, },
{ PCI_DEVICE(0x1c5c, 0x1504), /* SK Hynix PC400 */
.driver_data = NVME_QUIRK_DISABLE_WRITE_ZEROES, },
+ { PCI_DEVICE(0x15b7, 0x2001), /* Sandisk Skyhawk */
+ .driver_data = NVME_QUIRK_DISABLE_WRITE_ZEROES, },
{ PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2001),
.driver_data = NVME_QUIRK_SINGLE_VECTOR },
{ PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2003) },
diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index 9e378d0..aad829a 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -1730,10 +1730,11 @@ static void nvme_rdma_process_nvme_rsp(struct nvme_rdma_queue *queue,
req->result = cqe->result;
if (wc->wc_flags & IB_WC_WITH_INVALIDATE) {
- if (unlikely(wc->ex.invalidate_rkey != req->mr->rkey)) {
+ if (unlikely(!req->mr ||
+ wc->ex.invalidate_rkey != req->mr->rkey)) {
dev_err(queue->ctrl->ctrl.device,
"Bogus remote invalidation for rkey %#x\n",
- req->mr->rkey);
+ req->mr ? req->mr->rkey : 0);
nvme_rdma_error_recovery(queue->ctrl);
}
} else if (req->mr) {
@@ -1926,7 +1927,6 @@ static int nvme_rdma_cm_handler(struct rdma_cm_id *cm_id,
complete(&queue->cm_done);
return 0;
case RDMA_CM_EVENT_REJECTED:
- nvme_rdma_destroy_queue_ib(queue);
cm_error = nvme_rdma_conn_rejected(queue, ev);
break;
case RDMA_CM_EVENT_ROUTE_ERROR:
diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index 25d62d8..aafcbc4 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -1126,7 +1126,8 @@ static void nvmet_start_ctrl(struct nvmet_ctrl *ctrl)
* in case a host died before it enabled the controller. Hence, simply
* reset the keep alive timer when the controller is enabled.
*/
- mod_delayed_work(system_wq, &ctrl->ka_work, ctrl->kato * HZ);
+ if (ctrl->kato)
+ mod_delayed_work(system_wq, &ctrl->ka_work, ctrl->kato * HZ);
}
static void nvmet_clear_ctrl(struct nvmet_ctrl *ctrl)
diff --git a/drivers/nvme/target/passthru.c b/drivers/nvme/target/passthru.c
index 56c57105..8ee94f0 100644
--- a/drivers/nvme/target/passthru.c
+++ b/drivers/nvme/target/passthru.c
@@ -26,7 +26,7 @@ static u16 nvmet_passthru_override_id_ctrl(struct nvmet_req *req)
struct nvme_ctrl *pctrl = ctrl->subsys->passthru_ctrl;
u16 status = NVME_SC_SUCCESS;
struct nvme_id_ctrl *id;
- u32 max_hw_sectors;
+ int max_hw_sectors;
int page_shift;
id = kzalloc(sizeof(*id), GFP_KERNEL);
@@ -48,6 +48,13 @@ static u16 nvmet_passthru_override_id_ctrl(struct nvmet_req *req)
max_hw_sectors = min_not_zero(pctrl->max_segments << (PAGE_SHIFT - 9),
pctrl->max_hw_sectors);
+ /*
+ * nvmet_passthru_map_sg is limitted to using a single bio so limit
+ * the mdts based on BIO_MAX_PAGES as well
+ */
+ max_hw_sectors = min_not_zero(BIO_MAX_PAGES << (PAGE_SHIFT - 9),
+ max_hw_sectors);
+
page_shift = NVME_CAP_MPSMIN(ctrl->cap) + 12;
id->mdts = ilog2(max_hw_sectors) + 9 - page_shift;
@@ -180,18 +187,20 @@ static void nvmet_passthru_req_done(struct request *rq,
static int nvmet_passthru_map_sg(struct nvmet_req *req, struct request *rq)
{
- int sg_cnt = req->sg_cnt;
struct scatterlist *sg;
int op_flags = 0;
struct bio *bio;
int i, ret;
+ if (req->sg_cnt > BIO_MAX_PAGES)
+ return -EINVAL;
+
if (req->cmd->common.opcode == nvme_cmd_flush)
op_flags = REQ_FUA;
else if (nvme_is_write(req->cmd))
op_flags = REQ_SYNC | REQ_IDLE;
- bio = bio_alloc(GFP_KERNEL, min(sg_cnt, BIO_MAX_PAGES));
+ bio = bio_alloc(GFP_KERNEL, req->sg_cnt);
bio->bi_end_io = bio_put;
bio->bi_opf = req_op(rq) | op_flags;
@@ -201,7 +210,6 @@ static int nvmet_passthru_map_sg(struct nvmet_req *req, struct request *rq)
bio_put(bio);
return -EINVAL;
}
- sg_cnt--;
}
ret = blk_rq_append_bio(rq, &bio);
@@ -236,7 +244,7 @@ static void nvmet_passthru_execute_cmd(struct nvmet_req *req)
q = ns->queue;
}
- rq = nvme_alloc_request(q, req->cmd, BLK_MQ_REQ_NOWAIT, NVME_QID_ANY);
+ rq = nvme_alloc_request(q, req->cmd, 0, NVME_QID_ANY);
if (IS_ERR(rq)) {
status = NVME_SC_INTERNAL;
goto out_put_ns;
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index eae3579..e381067 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -1913,6 +1913,10 @@ enum { /* hot key scan codes (derived from ACPI DSDT) */
TP_ACPI_HOTKEYSCAN_CALCULATOR,
TP_ACPI_HOTKEYSCAN_BLUETOOTH,
TP_ACPI_HOTKEYSCAN_KEYBOARD,
+ TP_ACPI_HOTKEYSCAN_FN_RIGHT_SHIFT, /* Used by "Lenovo Quick Clean" */
+ TP_ACPI_HOTKEYSCAN_NOTIFICATION_CENTER,
+ TP_ACPI_HOTKEYSCAN_PICKUP_PHONE,
+ TP_ACPI_HOTKEYSCAN_HANGUP_PHONE,
/* Hotkey keymap size */
TPACPI_HOTKEY_MAP_LEN
@@ -3429,11 +3433,15 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
KEY_UNKNOWN,
- KEY_BOOKMARKS, /* Favorite app, 0x311 */
- KEY_RESERVED, /* Clipping tool */
- KEY_CALC, /* Calculator (above numpad, P52) */
- KEY_BLUETOOTH, /* Bluetooth */
- KEY_KEYBOARD /* Keyboard, 0x315 */
+ KEY_BOOKMARKS, /* Favorite app, 0x311 */
+ KEY_SELECTIVE_SCREENSHOT, /* Clipping tool */
+ KEY_CALC, /* Calculator (above numpad, P52) */
+ KEY_BLUETOOTH, /* Bluetooth */
+ KEY_KEYBOARD, /* Keyboard, 0x315 */
+ KEY_FN_RIGHT_SHIFT, /* Fn + right Shift */
+ KEY_NOTIFICATION_CENTER, /* Notification Center */
+ KEY_PICKUP_PHONE, /* Answer incoming call */
+ KEY_HANGUP_PHONE, /* Decline incoming call */
},
};
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index ff0350c..696bf77 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -1,4 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
-source "drivers/power/avs/Kconfig"
source "drivers/power/reset/Kconfig"
source "drivers/power/supply/Kconfig"
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index b7c2e37..effbf03 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -1,4 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_POWER_AVS) += avs/
obj-$(CONFIG_POWER_RESET) += reset/
obj-$(CONFIG_POWER_SUPPLY) += supply/
diff --git a/drivers/power/avs/Kconfig b/drivers/power/avs/Kconfig
deleted file mode 100644
index cdb4237..0000000
--- a/drivers/power/avs/Kconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig POWER_AVS
- bool "Adaptive Voltage Scaling class support"
- help
- AVS is a power management technique which finely controls the
- operating voltage of a device in order to optimize (i.e. reduce)
- its power consumption.
- At a given operating point the voltage is adapted depending on
- static factors (chip manufacturing process) and dynamic factors
- (temperature depending performance).
- AVS is also called SmartReflex on OMAP devices.
-
- Say Y here to enable Adaptive Voltage Scaling class support.
-
-config QCOM_CPR
- tristate "QCOM Core Power Reduction (CPR) support"
- depends on POWER_AVS && HAS_IOMEM
- select PM_OPP
- select REGMAP
- help
- Say Y here to enable support for the CPR hardware found on Qualcomm
- SoCs like QCS404.
-
- This driver populates CPU OPPs tables and makes adjustments to the
- tables based on feedback from the CPR hardware. If you want to do
- CPUfrequency scaling say Y here.
-
- To compile this driver as a module, choose M here: the module will
- be called qcom-cpr
-
-config ROCKCHIP_IODOMAIN
- tristate "Rockchip IO domain support"
- depends on POWER_AVS && ARCH_ROCKCHIP && OF
- help
- Say y here to enable support io domains on Rockchip SoCs. It is
- necessary for the io domain setting of the SoC to match the
- voltage supplied by the regulators.
diff --git a/drivers/power/avs/Makefile b/drivers/power/avs/Makefile
deleted file mode 100644
index 9007d05..0000000
--- a/drivers/power/avs/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_POWER_AVS_OMAP) += smartreflex.o
-obj-$(CONFIG_QCOM_CPR) += qcom-cpr.o
-obj-$(CONFIG_ROCKCHIP_IODOMAIN) += rockchip-io-domain.o
diff --git a/drivers/power/supply/s3c_adc_battery.c b/drivers/power/supply/s3c_adc_battery.c
index 3d00b35..60b7f41 100644
--- a/drivers/power/supply/s3c_adc_battery.c
+++ b/drivers/power/supply/s3c_adc_battery.c
@@ -22,7 +22,7 @@
#include <linux/init.h>
#include <linux/module.h>
-#include <plat/adc.h>
+#include <linux/soc/samsung/s3c-adc.h>
#define BAT_POLL_INTERVAL 10000 /* ms */
#define JITTER_DELAY 500 /* ms */
diff --git a/drivers/powercap/Kconfig b/drivers/powercap/Kconfig
index ebc4d45..bc22872 100644
--- a/drivers/powercap/Kconfig
+++ b/drivers/powercap/Kconfig
@@ -30,7 +30,7 @@
In RAPL, the platform level settings are divided into domains for
fine grained control. These domains include processor package, DRAM
- controller, CPU core (Power Plance 0), graphics uncore (Power Plane
+ controller, CPU core (Power Plane 0), graphics uncore (Power Plane
1), etc.
config IDLE_INJECT
diff --git a/drivers/powercap/intel_rapl_common.c b/drivers/powercap/intel_rapl_common.c
index 983d75b..0b2830e 100644
--- a/drivers/powercap/intel_rapl_common.c
+++ b/drivers/powercap/intel_rapl_common.c
@@ -544,7 +544,14 @@ static void rapl_init_domains(struct rapl_package *rp)
continue;
rd->rp = rp;
- rd->name = rapl_domain_names[i];
+
+ if (i == RAPL_DOMAIN_PLATFORM && rp->id > 0) {
+ snprintf(rd->name, RAPL_DOMAIN_NAME_LENGTH, "psys-%d",
+ cpu_data(rp->lead_cpu).phys_proc_id);
+ } else
+ snprintf(rd->name, RAPL_DOMAIN_NAME_LENGTH, "%s",
+ rapl_domain_names[i]);
+
rd->id = i;
rd->rpl[0].prim_id = PL1_ENABLE;
rd->rpl[0].name = pl1_name;
@@ -1112,13 +1119,17 @@ static int rapl_package_register_powercap(struct rapl_package *rp)
}
/* now register domains as children of the socket/package */
for (rd = rp->domains; rd < rp->domains + rp->nr_domains; rd++) {
+ struct powercap_zone *parent = rp->power_zone;
+
if (rd->id == RAPL_DOMAIN_PACKAGE)
continue;
+ if (rd->id == RAPL_DOMAIN_PLATFORM)
+ parent = NULL;
/* number of power limits per domain varies */
nr_pl = find_nr_power_limit(rd);
power_zone = powercap_register_zone(&rd->power_zone,
rp->priv->control_type,
- rd->name, rp->power_zone,
+ rd->name, parent,
&zone_ops[rd->id], nr_pl,
&constraint_ops);
@@ -1145,67 +1156,6 @@ static int rapl_package_register_powercap(struct rapl_package *rp)
return ret;
}
-int rapl_add_platform_domain(struct rapl_if_priv *priv)
-{
- struct rapl_domain *rd;
- struct powercap_zone *power_zone;
- struct reg_action ra;
- int ret;
-
- ra.reg = priv->regs[RAPL_DOMAIN_PLATFORM][RAPL_DOMAIN_REG_STATUS];
- ra.mask = ~0;
- ret = priv->read_raw(0, &ra);
- if (ret || !ra.value)
- return -ENODEV;
-
- ra.reg = priv->regs[RAPL_DOMAIN_PLATFORM][RAPL_DOMAIN_REG_LIMIT];
- ra.mask = ~0;
- ret = priv->read_raw(0, &ra);
- if (ret || !ra.value)
- return -ENODEV;
-
- rd = kzalloc(sizeof(*rd), GFP_KERNEL);
- if (!rd)
- return -ENOMEM;
-
- rd->name = rapl_domain_names[RAPL_DOMAIN_PLATFORM];
- rd->id = RAPL_DOMAIN_PLATFORM;
- rd->regs[RAPL_DOMAIN_REG_LIMIT] =
- priv->regs[RAPL_DOMAIN_PLATFORM][RAPL_DOMAIN_REG_LIMIT];
- rd->regs[RAPL_DOMAIN_REG_STATUS] =
- priv->regs[RAPL_DOMAIN_PLATFORM][RAPL_DOMAIN_REG_STATUS];
- rd->rpl[0].prim_id = PL1_ENABLE;
- rd->rpl[0].name = pl1_name;
- rd->rpl[1].prim_id = PL2_ENABLE;
- rd->rpl[1].name = pl2_name;
- rd->rp = rapl_find_package_domain(0, priv);
-
- power_zone = powercap_register_zone(&rd->power_zone, priv->control_type,
- "psys", NULL,
- &zone_ops[RAPL_DOMAIN_PLATFORM],
- 2, &constraint_ops);
-
- if (IS_ERR(power_zone)) {
- kfree(rd);
- return PTR_ERR(power_zone);
- }
-
- priv->platform_rapl_domain = rd;
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(rapl_add_platform_domain);
-
-void rapl_remove_platform_domain(struct rapl_if_priv *priv)
-{
- if (priv->platform_rapl_domain) {
- powercap_unregister_zone(priv->control_type,
- &priv->platform_rapl_domain->power_zone);
- kfree(priv->platform_rapl_domain);
- }
-}
-EXPORT_SYMBOL_GPL(rapl_remove_platform_domain);
-
static int rapl_check_domain(int cpu, int domain, struct rapl_package *rp)
{
struct reg_action ra;
@@ -1215,11 +1165,9 @@ static int rapl_check_domain(int cpu, int domain, struct rapl_package *rp)
case RAPL_DOMAIN_PP0:
case RAPL_DOMAIN_PP1:
case RAPL_DOMAIN_DRAM:
+ case RAPL_DOMAIN_PLATFORM:
ra.reg = rp->priv->regs[domain][RAPL_DOMAIN_REG_STATUS];
break;
- case RAPL_DOMAIN_PLATFORM:
- /* PSYS(PLATFORM) is not a CPU domain, so avoid printng error */
- return -EINVAL;
default:
pr_err("invalid domain id %d\n", domain);
return -EINVAL;
@@ -1228,7 +1176,7 @@ static int rapl_check_domain(int cpu, int domain, struct rapl_package *rp)
* values, otherwise skip it.
*/
- ra.mask = ~0;
+ ra.mask = ENERGY_STATUS_MASK;
if (rp->priv->read_raw(cpu, &ra) || !ra.value)
return -ENODEV;
diff --git a/drivers/powercap/intel_rapl_msr.c b/drivers/powercap/intel_rapl_msr.c
index d2a2627..1646808 100644
--- a/drivers/powercap/intel_rapl_msr.c
+++ b/drivers/powercap/intel_rapl_msr.c
@@ -44,6 +44,7 @@ static struct rapl_if_priv rapl_msr_priv = {
.regs[RAPL_DOMAIN_PLATFORM] = {
MSR_PLATFORM_POWER_LIMIT, MSR_PLATFORM_ENERGY_STATUS, 0, 0, 0},
.limits[RAPL_DOMAIN_PACKAGE] = 2,
+ .limits[RAPL_DOMAIN_PLATFORM] = 2,
};
/* Handles CPU hotplug on multi-socket systems.
@@ -157,9 +158,6 @@ static int rapl_msr_probe(struct platform_device *pdev)
goto out;
rapl_msr_priv.pcap_rapl_online = ret;
- /* Don't bail out if PSys is not supported */
- rapl_add_platform_domain(&rapl_msr_priv);
-
return 0;
out:
@@ -171,7 +169,6 @@ static int rapl_msr_probe(struct platform_device *pdev)
static int rapl_msr_remove(struct platform_device *pdev)
{
cpuhp_remove_state(rapl_msr_priv.pcap_rapl_online);
- rapl_remove_platform_domain(&rapl_msr_priv);
powercap_unregister_control_type(rapl_msr_priv.control_type);
return 0;
}
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 78ddc12..63be536 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -410,7 +410,7 @@
config PWM_SAMSUNG
tristate "Samsung PWM support"
- depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
help
Generic PWM framework driver for Samsung.
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 97e8487..07d162b 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -65,9 +65,10 @@
This enables the reset controller driver for HSDK board.
config RESET_IMX7
- bool "i.MX7/8 Reset Driver" if COMPILE_TEST
+ tristate "i.MX7/8 Reset Driver"
depends on HAS_IOMEM
- default SOC_IMX7D || (ARM64 && ARCH_MXC)
+ depends on SOC_IMX7D || (ARM64 && ARCH_MXC) || COMPILE_TEST
+ default y if SOC_IMX7D
select MFD_SYSCON
help
This enables the reset controller driver for i.MX7 SoCs.
diff --git a/drivers/reset/core.c b/drivers/reset/core.c
index 01c0c7a..a2df88e 100644
--- a/drivers/reset/core.c
+++ b/drivers/reset/core.c
@@ -32,7 +32,8 @@ static LIST_HEAD(reset_lookup_list);
* @refcnt: Number of gets of this reset_control
* @acquired: Only one reset_control may be acquired for a given rcdev and id.
* @shared: Is this a shared (1), or an exclusive (0) reset_control?
- * @deassert_cnt: Number of times this reset line has been deasserted
+ * @array: Is this an array of reset controls (1)?
+ * @deassert_count: Number of times this reset line has been deasserted
* @triggered_count: Number of times this reset line has been reset. Currently
* only used for shared resets, which means that the value
* will be either 0 or 1.
diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c
index e8aa869..185a333 100644
--- a/drivers/reset/reset-imx7.c
+++ b/drivers/reset/reset-imx7.c
@@ -8,7 +8,7 @@
*/
#include <linux/mfd/syscon.h>
-#include <linux/mod_devicetable.h>
+#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
@@ -178,6 +178,9 @@ static const struct imx7_src_signal imx8mq_src_signals[IMX8MQ_RESET_NUM] = {
[IMX8MQ_RESET_A53_SOC_DBG_RESET] = { SRC_A53RCR0, BIT(20) },
[IMX8MQ_RESET_A53_L2RESET] = { SRC_A53RCR0, BIT(21) },
[IMX8MQ_RESET_SW_NON_SCLR_M4C_RST] = { SRC_M4RCR, BIT(0) },
+ [IMX8MQ_RESET_SW_M4C_RST] = { SRC_M4RCR, BIT(1) },
+ [IMX8MQ_RESET_SW_M4P_RST] = { SRC_M4RCR, BIT(2) },
+ [IMX8MQ_RESET_M4_ENABLE] = { SRC_M4RCR, BIT(3) },
[IMX8MQ_RESET_OTG1_PHY_RESET] = { SRC_USBOPHY1_RCR, BIT(0) },
[IMX8MQ_RESET_OTG2_PHY_RESET] = { SRC_USBOPHY2_RCR, BIT(0) },
[IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N] = { SRC_MIPIPHY_RCR, BIT(1) },
@@ -238,6 +241,7 @@ static int imx8mq_reset_set(struct reset_controller_dev *rcdev,
case IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N:
case IMX8MQ_RESET_MIPI_DSI_RESET_N:
case IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N:
+ case IMX8MQ_RESET_M4_ENABLE:
value = assert ? 0 : bit;
break;
}
@@ -386,6 +390,7 @@ static const struct of_device_id imx7_reset_dt_ids[] = {
{ .compatible = "fsl,imx8mp-src", .data = &variant_imx8mp },
{ /* sentinel */ },
};
+MODULE_DEVICE_TABLE(of, imx7_reset_dt_ids);
static struct platform_driver imx7_reset_driver = {
.probe = imx7_reset_probe,
@@ -394,4 +399,8 @@ static struct platform_driver imx7_reset_driver = {
.of_match_table = imx7_reset_dt_ids,
},
};
-builtin_platform_driver(imx7_reset_driver);
+module_platform_driver(imx7_reset_driver);
+
+MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
+MODULE_DESCRIPTION("NXP i.MX7 reset driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/reset/reset-zynqmp.c b/drivers/reset/reset-zynqmp.c
index 373ea8d4..ebd433f 100644
--- a/drivers/reset/reset-zynqmp.c
+++ b/drivers/reset/reset-zynqmp.c
@@ -9,12 +9,20 @@
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/firmware/xlnx-zynqmp.h>
+#include <linux/of_device.h>
#define ZYNQMP_NR_RESETS (ZYNQMP_PM_RESET_END - ZYNQMP_PM_RESET_START)
#define ZYNQMP_RESET_ID ZYNQMP_PM_RESET_START
+#define VERSAL_NR_RESETS 95
+
+struct zynqmp_reset_soc_data {
+ u32 reset_id;
+ u32 num_resets;
+};
struct zynqmp_reset_data {
struct reset_controller_dev rcdev;
+ const struct zynqmp_reset_soc_data *data;
};
static inline struct zynqmp_reset_data *
@@ -26,23 +34,28 @@ to_zynqmp_reset_data(struct reset_controller_dev *rcdev)
static int zynqmp_reset_assert(struct reset_controller_dev *rcdev,
unsigned long id)
{
- return zynqmp_pm_reset_assert(ZYNQMP_RESET_ID + id,
+ struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
+
+ return zynqmp_pm_reset_assert(priv->data->reset_id + id,
PM_RESET_ACTION_ASSERT);
}
static int zynqmp_reset_deassert(struct reset_controller_dev *rcdev,
unsigned long id)
{
- return zynqmp_pm_reset_assert(ZYNQMP_RESET_ID + id,
+ struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
+
+ return zynqmp_pm_reset_assert(priv->data->reset_id + id,
PM_RESET_ACTION_RELEASE);
}
static int zynqmp_reset_status(struct reset_controller_dev *rcdev,
unsigned long id)
{
+ struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
int val, err;
- err = zynqmp_pm_reset_get_status(ZYNQMP_RESET_ID + id, &val);
+ err = zynqmp_pm_reset_get_status(priv->data->reset_id + id, &val);
if (err)
return err;
@@ -52,10 +65,28 @@ static int zynqmp_reset_status(struct reset_controller_dev *rcdev,
static int zynqmp_reset_reset(struct reset_controller_dev *rcdev,
unsigned long id)
{
- return zynqmp_pm_reset_assert(ZYNQMP_RESET_ID + id,
+ struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
+
+ return zynqmp_pm_reset_assert(priv->data->reset_id + id,
PM_RESET_ACTION_PULSE);
}
+static int zynqmp_reset_of_xlate(struct reset_controller_dev *rcdev,
+ const struct of_phandle_args *reset_spec)
+{
+ return reset_spec->args[0];
+}
+
+static const struct zynqmp_reset_soc_data zynqmp_reset_data = {
+ .reset_id = ZYNQMP_RESET_ID,
+ .num_resets = ZYNQMP_NR_RESETS,
+};
+
+static const struct zynqmp_reset_soc_data versal_reset_data = {
+ .reset_id = 0,
+ .num_resets = VERSAL_NR_RESETS,
+};
+
static const struct reset_control_ops zynqmp_reset_ops = {
.reset = zynqmp_reset_reset,
.assert = zynqmp_reset_assert,
@@ -71,18 +102,25 @@ static int zynqmp_reset_probe(struct platform_device *pdev)
if (!priv)
return -ENOMEM;
+ priv->data = of_device_get_match_data(&pdev->dev);
+ if (!priv->data)
+ return -EINVAL;
+
platform_set_drvdata(pdev, priv);
priv->rcdev.ops = &zynqmp_reset_ops;
priv->rcdev.owner = THIS_MODULE;
priv->rcdev.of_node = pdev->dev.of_node;
- priv->rcdev.nr_resets = ZYNQMP_NR_RESETS;
+ priv->rcdev.nr_resets = priv->data->num_resets;
+ priv->rcdev.of_reset_n_cells = 1;
+ priv->rcdev.of_xlate = zynqmp_reset_of_xlate;
return devm_reset_controller_register(&pdev->dev, &priv->rcdev);
}
static const struct of_device_id zynqmp_reset_dt_ids[] = {
- { .compatible = "xlnx,zynqmp-reset", },
+ { .compatible = "xlnx,zynqmp-reset", .data = &zynqmp_reset_data, },
+ { .compatible = "xlnx,versal-reset", .data = &versal_reset_data, },
{ /* sentinel */ },
};
diff --git a/drivers/reset/sti/reset-syscfg.c b/drivers/reset/sti/reset-syscfg.c
index 91215bb..99b6303 100644
--- a/drivers/reset/sti/reset-syscfg.c
+++ b/drivers/reset/sti/reset-syscfg.c
@@ -17,7 +17,7 @@
#include "reset-syscfg.h"
/**
- * Reset channel regmap configuration
+ * struct syscfg_reset_channel - Reset channel regmap configuration
*
* @reset: regmap field for the channel's reset bit.
* @ack: regmap field for the channel's ack bit (optional).
@@ -28,8 +28,9 @@ struct syscfg_reset_channel {
};
/**
- * A reset controller which groups together a set of related reset bits, which
- * may be located in different system configuration registers.
+ * struct syscfg_reset_controller - A reset controller which groups together
+ * a set of related reset bits, which may be located in different system
+ * configuration registers.
*
* @rst: base reset controller structure.
* @active_low: are the resets in this controller active low, i.e. clearing
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index 5117d90..3242ff6 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -1506,10 +1506,8 @@ NCR_700_intr(int irq, void *dev_id)
__u8 sstat0 = 0, dstat = 0;
__u32 dsp;
struct scsi_cmnd *SCp = hostdata->cmd;
- enum NCR_700_Host_State state;
handled = 1;
- state = hostdata->state;
SCp = hostdata->cmd;
if(istat & SCSI_INT_PENDING) {
@@ -1760,7 +1758,6 @@ NCR_700_queuecommand_lck(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *)
struct NCR_700_Host_Parameters *hostdata =
(struct NCR_700_Host_Parameters *)SCp->device->host->hostdata[0];
__u32 move_ins;
- enum dma_data_direction direction;
struct NCR_700_command_slot *slot;
if(hostdata->command_slot_count >= NCR_700_COMMAND_SLOTS_PER_HOST) {
@@ -1877,7 +1874,6 @@ NCR_700_queuecommand_lck(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *)
}
/* now build the scatter gather list */
- direction = SCp->sc_data_direction;
if(move_ins != 0) {
int i;
int sg_count;
diff --git a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h
index 9220bcf..5d054d5 100644
--- a/drivers/scsi/arcmsr/arcmsr.h
+++ b/drivers/scsi/arcmsr/arcmsr.h
@@ -49,7 +49,7 @@ struct device_attribute;
#define ARCMSR_MAX_OUTSTANDING_CMD 1024
#define ARCMSR_DEFAULT_OUTSTANDING_CMD 128
#define ARCMSR_MIN_OUTSTANDING_CMD 32
-#define ARCMSR_DRIVER_VERSION "v1.40.00.10-20190116"
+#define ARCMSR_DRIVER_VERSION "v1.50.00.02-20200819"
#define ARCMSR_SCSI_INITIATOR_ID 255
#define ARCMSR_MAX_XFER_SECTORS 512
#define ARCMSR_MAX_XFER_SECTORS_B 4096
@@ -80,6 +80,7 @@ struct device_attribute;
#ifndef PCI_DEVICE_ID_ARECA_1884
#define PCI_DEVICE_ID_ARECA_1884 0x1884
#endif
+#define PCI_DEVICE_ID_ARECA_1886 0x188A
#define ARCMSR_HOURS (1000 * 60 * 60 * 4)
#define ARCMSR_MINUTES (1000 * 60 * 60)
/*
@@ -436,6 +437,21 @@ struct FIRMWARE_INFO
#define ARCMSR_HBEMU_DOORBELL_SYNC 0x100
#define ARCMSR_ARC188X_RESET_ADAPTER 0x00000004
#define ARCMSR_ARC1884_DiagWrite_ENABLE 0x00000080
+
+/*
+*******************************************************************************
+** SPEC. for Areca Type F adapter
+*******************************************************************************
+*/
+#define ARCMSR_SIGNATURE_1886 0x188617D3
+// Doorbell and interrupt definition are same as Type E adapter
+/* ARC-1886 doorbell sync */
+#define ARCMSR_HBFMU_DOORBELL_SYNC 0x100
+//set host rw buffer physical address at inbound message 0, 1 (low,high)
+#define ARCMSR_HBFMU_DOORBELL_SYNC1 0x300
+#define ARCMSR_HBFMU_MESSAGE_FIRMWARE_OK 0x80000000
+#define ARCMSR_HBFMU_MESSAGE_NO_VOLUME_CHANGE 0x20000000
+
/*
*******************************************************************************
** ARECA SCSI COMMAND DESCRIPTOR BLOCK size 0x1F8 (504)
@@ -720,6 +736,80 @@ struct MessageUnit_E{
uint32_t msgcode_rwbuffer[256]; /*2200 23FF*/
};
+/*
+*********************************************************************
+** Messaging Unit (MU) of Type F processor(LSI)
+*********************************************************************
+*/
+struct MessageUnit_F {
+ uint32_t iobound_doorbell; /*0000 0003*/
+ uint32_t write_sequence_3xxx; /*0004 0007*/
+ uint32_t host_diagnostic_3xxx; /*0008 000B*/
+ uint32_t posted_outbound_doorbell; /*000C 000F*/
+ uint32_t master_error_attribute; /*0010 0013*/
+ uint32_t master_error_address_low; /*0014 0017*/
+ uint32_t master_error_address_high; /*0018 001B*/
+ uint32_t hcb_size; /*001C 001F*/
+ uint32_t inbound_doorbell; /*0020 0023*/
+ uint32_t diagnostic_rw_data; /*0024 0027*/
+ uint32_t diagnostic_rw_address_low; /*0028 002B*/
+ uint32_t diagnostic_rw_address_high; /*002C 002F*/
+ uint32_t host_int_status; /*0030 0033*/
+ uint32_t host_int_mask; /*0034 0037*/
+ uint32_t dcr_data; /*0038 003B*/
+ uint32_t dcr_address; /*003C 003F*/
+ uint32_t inbound_queueport; /*0040 0043*/
+ uint32_t outbound_queueport; /*0044 0047*/
+ uint32_t hcb_pci_address_low; /*0048 004B*/
+ uint32_t hcb_pci_address_high; /*004C 004F*/
+ uint32_t iop_int_status; /*0050 0053*/
+ uint32_t iop_int_mask; /*0054 0057*/
+ uint32_t iop_inbound_queue_port; /*0058 005B*/
+ uint32_t iop_outbound_queue_port; /*005C 005F*/
+ uint32_t inbound_free_list_index; /*0060 0063*/
+ uint32_t inbound_post_list_index; /*0064 0067*/
+ uint32_t reply_post_producer_index; /*0068 006B*/
+ uint32_t reply_post_consumer_index; /*006C 006F*/
+ uint32_t inbound_doorbell_clear; /*0070 0073*/
+ uint32_t i2o_message_unit_control; /*0074 0077*/
+ uint32_t last_used_message_source_address_low; /*0078 007B*/
+ uint32_t last_used_message_source_address_high; /*007C 007F*/
+ uint32_t pull_mode_data_byte_count[4]; /*0080 008F*/
+ uint32_t message_dest_address_index; /*0090 0093*/
+ uint32_t done_queue_not_empty_int_counter_timer; /*0094 0097*/
+ uint32_t utility_A_int_counter_timer; /*0098 009B*/
+ uint32_t outbound_doorbell; /*009C 009F*/
+ uint32_t outbound_doorbell_clear; /*00A0 00A3*/
+ uint32_t message_source_address_index; /*00A4 00A7*/
+ uint32_t message_done_queue_index; /*00A8 00AB*/
+ uint32_t reserved0; /*00AC 00AF*/
+ uint32_t inbound_msgaddr0; /*00B0 00B3*/
+ uint32_t inbound_msgaddr1; /*00B4 00B7*/
+ uint32_t outbound_msgaddr0; /*00B8 00BB*/
+ uint32_t outbound_msgaddr1; /*00BC 00BF*/
+ uint32_t inbound_queueport_low; /*00C0 00C3*/
+ uint32_t inbound_queueport_high; /*00C4 00C7*/
+ uint32_t outbound_queueport_low; /*00C8 00CB*/
+ uint32_t outbound_queueport_high; /*00CC 00CF*/
+ uint32_t iop_inbound_queue_port_low; /*00D0 00D3*/
+ uint32_t iop_inbound_queue_port_high; /*00D4 00D7*/
+ uint32_t iop_outbound_queue_port_low; /*00D8 00DB*/
+ uint32_t iop_outbound_queue_port_high; /*00DC 00DF*/
+ uint32_t message_dest_queue_port_low; /*00E0 00E3*/
+ uint32_t message_dest_queue_port_high; /*00E4 00E7*/
+ uint32_t last_used_message_dest_address_low; /*00E8 00EB*/
+ uint32_t last_used_message_dest_address_high; /*00EC 00EF*/
+ uint32_t message_done_queue_base_address_low; /*00F0 00F3*/
+ uint32_t message_done_queue_base_address_high; /*00F4 00F7*/
+ uint32_t host_diagnostic; /*00F8 00FB*/
+ uint32_t write_sequence; /*00FC 00FF*/
+ uint32_t reserved1[46]; /*0100 01B7*/
+ uint32_t reply_post_producer_index1; /*01B8 01BB*/
+ uint32_t reply_post_consumer_index1; /*01BC 01BF*/
+};
+
+#define MESG_RW_BUFFER_SIZE (256 * 3)
+
typedef struct deliver_completeQ {
uint16_t cmdFlag;
uint16_t cmdSMID;
@@ -739,6 +829,7 @@ struct AdapterControlBlock
#define ACB_ADAPTER_TYPE_C 0x00000002 /* hbc L IOP */
#define ACB_ADAPTER_TYPE_D 0x00000003 /* hbd M IOP */
#define ACB_ADAPTER_TYPE_E 0x00000004 /* hba L IOP */
+#define ACB_ADAPTER_TYPE_F 0x00000005 /* hba L IOP */
u32 ioqueue_size;
struct pci_dev * pdev;
struct Scsi_Host * host;
@@ -760,10 +851,16 @@ struct AdapterControlBlock
struct MessageUnit_C __iomem *pmuC;
struct MessageUnit_D *pmuD;
struct MessageUnit_E __iomem *pmuE;
+ struct MessageUnit_F __iomem *pmuF;
};
/* message unit ATU inbound base address0 */
void __iomem *mem_base0;
void __iomem *mem_base1;
+ //0x000 - COMPORT_IN (Host sent to ROC)
+ uint32_t *message_wbuffer;
+ //0x100 - COMPORT_OUT (ROC sent to Host)
+ uint32_t *message_rbuffer;
+ uint32_t *msgcode_rwbuffer; //0x200 - BIOS_AREA
uint32_t acb_flags;
u16 dev_id;
uint8_t adapter_index;
@@ -836,8 +933,6 @@ struct AdapterControlBlock
#define FW_NORMAL 0x0000
#define FW_BOG 0x0001
#define FW_DEADLOCK 0x0010
- atomic_t rq_map_token;
- atomic_t ante_token_value;
uint32_t maxOutstanding;
int vector_count;
uint32_t maxFreeCCB;
@@ -848,6 +943,7 @@ struct AdapterControlBlock
uint32_t out_doorbell;
uint32_t completionQ_entry;
pCompletion_Q pCompletionQ;
+ uint32_t completeQ_size;
};/* HW_DEVICE_EXTENSION */
/*
*******************************************************************************
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index ec895d0..e4fdb47 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -133,6 +133,7 @@ static void arcmsr_hbaC_message_isr(struct AdapterControlBlock *pACB);
static void arcmsr_hbaD_message_isr(struct AdapterControlBlock *acb);
static void arcmsr_hbaE_message_isr(struct AdapterControlBlock *acb);
static void arcmsr_hbaE_postqueue_isr(struct AdapterControlBlock *acb);
+static void arcmsr_hbaF_postqueue_isr(struct AdapterControlBlock *acb);
static void arcmsr_hardware_reset(struct AdapterControlBlock *acb);
static const char *arcmsr_info(struct Scsi_Host *);
static irqreturn_t arcmsr_interrupt(struct AdapterControlBlock *acb);
@@ -209,6 +210,8 @@ static struct pci_device_id arcmsr_device_id_table[] = {
.driver_data = ACB_ADAPTER_TYPE_C},
{PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1884),
.driver_data = ACB_ADAPTER_TYPE_E},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1886),
+ .driver_data = ACB_ADAPTER_TYPE_F},
{0, 0}, /* Terminating entry */
};
MODULE_DEVICE_TABLE(pci, arcmsr_device_id_table);
@@ -232,12 +235,12 @@ static void arcmsr_free_io_queue(struct AdapterControlBlock *acb)
switch (acb->adapter_type) {
case ACB_ADAPTER_TYPE_B:
case ACB_ADAPTER_TYPE_D:
- case ACB_ADAPTER_TYPE_E: {
+ case ACB_ADAPTER_TYPE_E:
+ case ACB_ADAPTER_TYPE_F:
dma_free_coherent(&acb->pdev->dev, acb->ioqueue_size,
acb->dma_coherent2, acb->dma_coherent_handle2);
break;
}
- }
}
static bool arcmsr_remap_pciregion(struct AdapterControlBlock *acb)
@@ -310,6 +313,19 @@ static bool arcmsr_remap_pciregion(struct AdapterControlBlock *acb)
acb->out_doorbell = 0;
break;
}
+ case ACB_ADAPTER_TYPE_F: {
+ acb->pmuF = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
+ if (!acb->pmuF) {
+ pr_notice("arcmsr%d: memory mapping region fail\n",
+ acb->host->host_no);
+ return false;
+ }
+ writel(0, &acb->pmuF->host_int_status); /* clear interrupt */
+ writel(ARCMSR_HBFMU_DOORBELL_SYNC, &acb->pmuF->iobound_doorbell);
+ acb->in_doorbell = 0;
+ acb->out_doorbell = 0;
+ break;
+ }
}
return true;
}
@@ -317,26 +333,25 @@ static bool arcmsr_remap_pciregion(struct AdapterControlBlock *acb)
static void arcmsr_unmap_pciregion(struct AdapterControlBlock *acb)
{
switch (acb->adapter_type) {
- case ACB_ADAPTER_TYPE_A:{
+ case ACB_ADAPTER_TYPE_A:
iounmap(acb->pmuA);
- }
- break;
- case ACB_ADAPTER_TYPE_B:{
+ break;
+ case ACB_ADAPTER_TYPE_B:
iounmap(acb->mem_base0);
iounmap(acb->mem_base1);
- }
-
- break;
- case ACB_ADAPTER_TYPE_C:{
+ break;
+ case ACB_ADAPTER_TYPE_C:
iounmap(acb->pmuC);
- }
- break;
+ break;
case ACB_ADAPTER_TYPE_D:
iounmap(acb->mem_base0);
break;
case ACB_ADAPTER_TYPE_E:
iounmap(acb->pmuE);
break;
+ case ACB_ADAPTER_TYPE_F:
+ iounmap(acb->pmuF);
+ break;
}
}
@@ -552,23 +567,20 @@ static void arcmsr_flush_adapter_cache(struct AdapterControlBlock *acb)
{
switch (acb->adapter_type) {
- case ACB_ADAPTER_TYPE_A: {
+ case ACB_ADAPTER_TYPE_A:
arcmsr_hbaA_flush_cache(acb);
- }
break;
-
- case ACB_ADAPTER_TYPE_B: {
+ case ACB_ADAPTER_TYPE_B:
arcmsr_hbaB_flush_cache(acb);
- }
break;
- case ACB_ADAPTER_TYPE_C: {
+ case ACB_ADAPTER_TYPE_C:
arcmsr_hbaC_flush_cache(acb);
- }
break;
case ACB_ADAPTER_TYPE_D:
arcmsr_hbaD_flush_cache(acb);
break;
case ACB_ADAPTER_TYPE_E:
+ case ACB_ADAPTER_TYPE_F:
arcmsr_hbaE_flush_cache(acb);
break;
}
@@ -626,6 +638,27 @@ static void arcmsr_hbaD_assign_regAddr(struct AdapterControlBlock *acb)
reg->msgcode_rwbuffer = MEM_BASE0(ARCMSR_ARC1214_MESSAGE_RWBUFFER);
}
+static void arcmsr_hbaF_assign_regAddr(struct AdapterControlBlock *acb)
+{
+ dma_addr_t host_buffer_dma;
+ struct MessageUnit_F __iomem *pmuF;
+
+ memset(acb->dma_coherent2, 0xff, acb->completeQ_size);
+ acb->message_wbuffer = (uint32_t *)round_up((unsigned long)acb->dma_coherent2 +
+ acb->completeQ_size, 4);
+ acb->message_rbuffer = ((void *)acb->message_wbuffer) + 0x100;
+ acb->msgcode_rwbuffer = ((void *)acb->message_wbuffer) + 0x200;
+ memset((void *)acb->message_wbuffer, 0, MESG_RW_BUFFER_SIZE);
+ host_buffer_dma = round_up(acb->dma_coherent_handle2 + acb->completeQ_size, 4);
+ pmuF = acb->pmuF;
+ /* host buffer low address, bit0:1 all buffer active */
+ writel(lower_32_bits(host_buffer_dma | 1), &pmuF->inbound_msgaddr0);
+ /* host buffer high address */
+ writel(upper_32_bits(host_buffer_dma), &pmuF->inbound_msgaddr1);
+ /* set host buffer physical address */
+ writel(ARCMSR_HBFMU_DOORBELL_SYNC1, &pmuF->iobound_doorbell);
+}
+
static bool arcmsr_alloc_io_queue(struct AdapterControlBlock *acb)
{
bool rtn = true;
@@ -679,6 +712,28 @@ static bool arcmsr_alloc_io_queue(struct AdapterControlBlock *acb)
acb->doneq_index = 0;
}
break;
+ case ACB_ADAPTER_TYPE_F: {
+ uint32_t QueueDepth;
+ uint32_t depthTbl[] = {256, 512, 1024, 128, 64, 32};
+
+ arcmsr_wait_firmware_ready(acb);
+ QueueDepth = depthTbl[readl(&acb->pmuF->outbound_msgaddr1) & 7];
+ acb->completeQ_size = sizeof(struct deliver_completeQ) * QueueDepth + 128;
+ acb->ioqueue_size = roundup(acb->completeQ_size + MESG_RW_BUFFER_SIZE, 32);
+ dma_coherent = dma_alloc_coherent(&pdev->dev, acb->ioqueue_size,
+ &dma_coherent_handle, GFP_KERNEL);
+ if (!dma_coherent) {
+ pr_notice("arcmsr%d: DMA allocation failed\n", acb->host->host_no);
+ return false;
+ }
+ acb->dma_coherent_handle2 = dma_coherent_handle;
+ acb->dma_coherent2 = dma_coherent;
+ acb->pCompletionQ = dma_coherent;
+ acb->completionQ_entry = acb->completeQ_size / sizeof(struct deliver_completeQ);
+ acb->doneq_index = 0;
+ arcmsr_hbaF_assign_regAddr(acb);
+ }
+ break;
default:
break;
}
@@ -713,7 +768,8 @@ static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb)
acb->host->sg_tablesize = max_sg_entrys;
roundup_ccbsize = roundup(sizeof(struct CommandControlBlock) + (max_sg_entrys - 1) * sizeof(struct SG64ENTRY), 32);
acb->uncache_size = roundup_ccbsize * acb->maxFreeCCB;
- acb->uncache_size += acb->ioqueue_size;
+ if (acb->adapter_type != ACB_ADAPTER_TYPE_F)
+ acb->uncache_size += acb->ioqueue_size;
dma_coherent = dma_alloc_coherent(&pdev->dev, acb->uncache_size, &dma_coherent_handle, GFP_KERNEL);
if(!dma_coherent){
printk(KERN_NOTICE "arcmsr%d: dma_alloc_coherent got error\n", acb->host->host_no);
@@ -736,6 +792,7 @@ static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb)
case ACB_ADAPTER_TYPE_C:
case ACB_ADAPTER_TYPE_D:
case ACB_ADAPTER_TYPE_E:
+ case ACB_ADAPTER_TYPE_F:
ccb_tmp->cdb_phyaddr = cdb_phyaddr;
break;
}
@@ -754,8 +811,10 @@ static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb)
ccb_tmp = (struct CommandControlBlock *)((unsigned long)ccb_tmp + roundup_ccbsize);
dma_coherent_handle = next_ccb_phy;
}
- acb->dma_coherent_handle2 = dma_coherent_handle;
- acb->dma_coherent2 = ccb_tmp;
+ if (acb->adapter_type != ACB_ADAPTER_TYPE_F) {
+ acb->dma_coherent_handle2 = dma_coherent_handle;
+ acb->dma_coherent2 = ccb_tmp;
+ }
switch (acb->adapter_type) {
case ACB_ADAPTER_TYPE_B:
acb->pmuB = (struct MessageUnit_B *)acb->dma_coherent2;
@@ -785,7 +844,6 @@ static void arcmsr_message_isr_bh_fn(struct work_struct *work)
struct scsi_device *psdev;
char diff, temp;
- acb->acb_flags &= ~ACB_F_MSG_GET_CONFIG;
switch (acb->adapter_type) {
case ACB_ADAPTER_TYPE_A: {
struct MessageUnit_A __iomem *reg = acb->pmuA;
@@ -822,8 +880,12 @@ static void arcmsr_message_isr_bh_fn(struct work_struct *work)
devicemap = (char __iomem *)(®->msgcode_rwbuffer[21]);
break;
}
+ case ACB_ADAPTER_TYPE_F: {
+ signature = (uint32_t __iomem *)(&acb->msgcode_rwbuffer[0]);
+ devicemap = (char __iomem *)(&acb->msgcode_rwbuffer[21]);
+ break;
+ }
}
- atomic_inc(&acb->rq_map_token);
if (readl(signature) != ARCMSR_SIGNATURE_GET_CONFIG)
return;
for (target = 0; target < ARCMSR_MAX_TARGETID - 1;
@@ -854,6 +916,7 @@ static void arcmsr_message_isr_bh_fn(struct work_struct *work)
devicemap++;
acb_dev_map++;
}
+ acb->acb_flags &= ~ACB_F_MSG_GET_CONFIG;
}
static int
@@ -906,8 +969,6 @@ arcmsr_request_irq(struct pci_dev *pdev, struct AdapterControlBlock *acb)
static void arcmsr_init_get_devmap_timer(struct AdapterControlBlock *pacb)
{
INIT_WORK(&pacb->arcmsr_do_message_isr_bh, arcmsr_message_isr_bh_fn);
- atomic_set(&pacb->rq_map_token, 16);
- atomic_set(&pacb->ante_token_value, 16);
pacb->fw_flag = FW_NORMAL;
timer_setup(&pacb->eternal_timer, arcmsr_request_device_map, 0);
pacb->eternal_timer.expires = jiffies + msecs_to_jiffies(6 * HZ);
@@ -1009,7 +1070,8 @@ static int arcmsr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if(!error){
goto free_hbb_mu;
}
- arcmsr_free_io_queue(acb);
+ if (acb->adapter_type != ACB_ADAPTER_TYPE_F)
+ arcmsr_free_io_queue(acb);
error = arcmsr_alloc_ccb_pool(acb);
if(error){
goto unmap_pci_region;
@@ -1122,6 +1184,14 @@ static int arcmsr_resume(struct pci_dev *pdev)
acb->out_doorbell = 0;
acb->doneq_index = 0;
break;
+ case ACB_ADAPTER_TYPE_F:
+ writel(0, &acb->pmuF->host_int_status);
+ writel(ARCMSR_HBFMU_DOORBELL_SYNC, &acb->pmuF->iobound_doorbell);
+ acb->in_doorbell = 0;
+ acb->out_doorbell = 0;
+ acb->doneq_index = 0;
+ arcmsr_hbaF_assign_regAddr(acb);
+ break;
}
arcmsr_iop_init(acb);
arcmsr_init_get_devmap_timer(acb);
@@ -1134,6 +1204,8 @@ static int arcmsr_resume(struct pci_dev *pdev)
controller_unregister:
scsi_remove_host(host);
arcmsr_free_ccb_pool(acb);
+ if (acb->adapter_type == ACB_ADAPTER_TYPE_F)
+ arcmsr_free_io_queue(acb);
arcmsr_unmap_pciregion(acb);
pci_release_regions(pdev);
scsi_host_put(host);
@@ -1213,25 +1285,20 @@ static uint8_t arcmsr_abort_allcmd(struct AdapterControlBlock *acb)
{
uint8_t rtnval = 0;
switch (acb->adapter_type) {
- case ACB_ADAPTER_TYPE_A: {
+ case ACB_ADAPTER_TYPE_A:
rtnval = arcmsr_hbaA_abort_allcmd(acb);
- }
break;
-
- case ACB_ADAPTER_TYPE_B: {
+ case ACB_ADAPTER_TYPE_B:
rtnval = arcmsr_hbaB_abort_allcmd(acb);
- }
break;
-
- case ACB_ADAPTER_TYPE_C: {
+ case ACB_ADAPTER_TYPE_C:
rtnval = arcmsr_hbaC_abort_allcmd(acb);
- }
break;
-
case ACB_ADAPTER_TYPE_D:
rtnval = arcmsr_hbaD_abort_allcmd(acb);
break;
case ACB_ADAPTER_TYPE_E:
+ case ACB_ADAPTER_TYPE_F:
rtnval = arcmsr_hbaE_abort_allcmd(acb);
break;
}
@@ -1307,7 +1374,8 @@ static u32 arcmsr_disable_outbound_ints(struct AdapterControlBlock *acb)
writel(ARCMSR_ARC1214_ALL_INT_DISABLE, reg->pcief0_int_enable);
}
break;
- case ACB_ADAPTER_TYPE_E: {
+ case ACB_ADAPTER_TYPE_E:
+ case ACB_ADAPTER_TYPE_F: {
struct MessageUnit_E __iomem *reg = acb->pmuE;
orig_mask = readl(®->host_int_mask);
writel(orig_mask | ARCMSR_HBEMU_OUTBOUND_DOORBELL_ISR | ARCMSR_HBEMU_OUTBOUND_POSTQUEUE_ISR, ®->host_int_mask);
@@ -1514,6 +1582,9 @@ static void arcmsr_done4abort_postqueue(struct AdapterControlBlock *acb)
case ACB_ADAPTER_TYPE_E:
arcmsr_hbaE_postqueue_isr(acb);
break;
+ case ACB_ADAPTER_TYPE_F:
+ arcmsr_hbaF_postqueue_isr(acb);
+ break;
}
}
@@ -1568,6 +1639,8 @@ static void arcmsr_free_pcidev(struct AdapterControlBlock *acb)
pdev = acb->pdev;
arcmsr_free_irq(pdev, acb);
arcmsr_free_ccb_pool(acb);
+ if (acb->adapter_type == ACB_ADAPTER_TYPE_F)
+ arcmsr_free_io_queue(acb);
arcmsr_unmap_pciregion(acb);
pci_release_regions(pdev);
scsi_host_put(host);
@@ -1625,6 +1698,8 @@ static void arcmsr_remove(struct pci_dev *pdev)
}
arcmsr_free_irq(pdev, acb);
arcmsr_free_ccb_pool(acb);
+ if (acb->adapter_type == ACB_ADAPTER_TYPE_F)
+ arcmsr_free_io_queue(acb);
arcmsr_unmap_pciregion(acb);
pci_release_regions(pdev);
scsi_host_put(host);
@@ -1702,7 +1777,8 @@ static void arcmsr_enable_outbound_ints(struct AdapterControlBlock *acb,
writel(intmask_org | mask, reg->pcief0_int_enable);
break;
}
- case ACB_ADAPTER_TYPE_E: {
+ case ACB_ADAPTER_TYPE_E:
+ case ACB_ADAPTER_TYPE_F: {
struct MessageUnit_E __iomem *reg = acb->pmuE;
mask = ~(ARCMSR_HBEMU_OUTBOUND_DOORBELL_ISR | ARCMSR_HBEMU_OUTBOUND_POSTQUEUE_ISR);
@@ -1846,6 +1922,19 @@ static void arcmsr_post_ccb(struct AdapterControlBlock *acb, struct CommandContr
writel(ccb_post_stamp, &pmu->inbound_queueport_low);
break;
}
+ case ACB_ADAPTER_TYPE_F: {
+ struct MessageUnit_F __iomem *pmu = acb->pmuF;
+ u32 ccb_post_stamp, arc_cdb_size;
+
+ if (ccb->arc_cdb_size <= 0x300)
+ arc_cdb_size = (ccb->arc_cdb_size - 1) >> 6 | 1;
+ else
+ arc_cdb_size = (((ccb->arc_cdb_size + 0xff) >> 8) + 2) << 1 | 1;
+ ccb_post_stamp = (ccb->smid | arc_cdb_size);
+ writel(0, &pmu->inbound_queueport_high);
+ writel(ccb_post_stamp, &pmu->inbound_queueport_low);
+ break;
+ }
}
}
@@ -1916,23 +2005,20 @@ static void arcmsr_hbaE_stop_bgrb(struct AdapterControlBlock *pACB)
static void arcmsr_stop_adapter_bgrb(struct AdapterControlBlock *acb)
{
switch (acb->adapter_type) {
- case ACB_ADAPTER_TYPE_A: {
+ case ACB_ADAPTER_TYPE_A:
arcmsr_hbaA_stop_bgrb(acb);
- }
break;
-
- case ACB_ADAPTER_TYPE_B: {
+ case ACB_ADAPTER_TYPE_B:
arcmsr_hbaB_stop_bgrb(acb);
- }
break;
- case ACB_ADAPTER_TYPE_C: {
+ case ACB_ADAPTER_TYPE_C:
arcmsr_hbaC_stop_bgrb(acb);
- }
break;
case ACB_ADAPTER_TYPE_D:
arcmsr_hbaD_stop_bgrb(acb);
break;
case ACB_ADAPTER_TYPE_E:
+ case ACB_ADAPTER_TYPE_F:
arcmsr_hbaE_stop_bgrb(acb);
break;
}
@@ -1951,7 +2037,6 @@ static void arcmsr_iop_message_read(struct AdapterControlBlock *acb)
writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK, ®->inbound_doorbell);
}
break;
-
case ACB_ADAPTER_TYPE_B: {
struct MessageUnit_B *reg = acb->pmuB;
writel(ARCMSR_DRV2IOP_DATA_READ_OK, reg->drv2iop_doorbell);
@@ -1969,7 +2054,8 @@ static void arcmsr_iop_message_read(struct AdapterControlBlock *acb)
reg->inbound_doorbell);
}
break;
- case ACB_ADAPTER_TYPE_E: {
+ case ACB_ADAPTER_TYPE_E:
+ case ACB_ADAPTER_TYPE_F: {
struct MessageUnit_E __iomem *reg = acb->pmuE;
acb->out_doorbell ^= ARCMSR_HBEMU_DRV2IOP_DATA_READ_OK;
writel(acb->out_doorbell, ®->iobound_doorbell);
@@ -2015,7 +2101,8 @@ static void arcmsr_iop_message_wrote(struct AdapterControlBlock *acb)
reg->inbound_doorbell);
}
break;
- case ACB_ADAPTER_TYPE_E: {
+ case ACB_ADAPTER_TYPE_E:
+ case ACB_ADAPTER_TYPE_F: {
struct MessageUnit_E __iomem *reg = acb->pmuE;
acb->out_doorbell ^= ARCMSR_HBEMU_DRV2IOP_DATA_WRITE_OK;
writel(acb->out_doorbell, ®->iobound_doorbell);
@@ -2034,7 +2121,6 @@ struct QBUFFER __iomem *arcmsr_get_iop_rqbuffer(struct AdapterControlBlock *acb)
qbuffer = (struct QBUFFER __iomem *)®->message_rbuffer;
}
break;
-
case ACB_ADAPTER_TYPE_B: {
struct MessageUnit_B *reg = acb->pmuB;
qbuffer = (struct QBUFFER __iomem *)reg->message_rbuffer;
@@ -2055,6 +2141,10 @@ struct QBUFFER __iomem *arcmsr_get_iop_rqbuffer(struct AdapterControlBlock *acb)
qbuffer = (struct QBUFFER __iomem *)®->message_rbuffer;
}
break;
+ case ACB_ADAPTER_TYPE_F: {
+ qbuffer = (struct QBUFFER __iomem *)acb->message_rbuffer;
+ }
+ break;
}
return qbuffer;
}
@@ -2069,7 +2159,6 @@ static struct QBUFFER __iomem *arcmsr_get_iop_wqbuffer(struct AdapterControlBloc
pqbuffer = (struct QBUFFER __iomem *) ®->message_wbuffer;
}
break;
-
case ACB_ADAPTER_TYPE_B: {
struct MessageUnit_B *reg = acb->pmuB;
pqbuffer = (struct QBUFFER __iomem *)reg->message_wbuffer;
@@ -2090,6 +2179,9 @@ static struct QBUFFER __iomem *arcmsr_get_iop_wqbuffer(struct AdapterControlBloc
pqbuffer = (struct QBUFFER __iomem *)®->message_wbuffer;
}
break;
+ case ACB_ADAPTER_TYPE_F:
+ pqbuffer = (struct QBUFFER __iomem *)acb->message_wbuffer;
+ break;
}
return pqbuffer;
}
@@ -2504,6 +2596,36 @@ static void arcmsr_hbaE_postqueue_isr(struct AdapterControlBlock *acb)
spin_unlock_irqrestore(&acb->doneq_lock, flags);
}
+static void arcmsr_hbaF_postqueue_isr(struct AdapterControlBlock *acb)
+{
+ uint32_t doneq_index;
+ uint16_t cmdSMID;
+ int error;
+ struct MessageUnit_F __iomem *phbcmu;
+ struct CommandControlBlock *ccb;
+ unsigned long flags;
+
+ spin_lock_irqsave(&acb->doneq_lock, flags);
+ doneq_index = acb->doneq_index;
+ phbcmu = acb->pmuF;
+ while (1) {
+ cmdSMID = acb->pCompletionQ[doneq_index].cmdSMID;
+ if (cmdSMID == 0xffff)
+ break;
+ ccb = acb->pccb_pool[cmdSMID];
+ error = (acb->pCompletionQ[doneq_index].cmdFlag &
+ ARCMSR_CCBREPLY_FLAG_ERROR_MODE1) ? true : false;
+ arcmsr_drain_donequeue(acb, ccb, error);
+ acb->pCompletionQ[doneq_index].cmdSMID = 0xffff;
+ doneq_index++;
+ if (doneq_index >= acb->completionQ_entry)
+ doneq_index = 0;
+ }
+ acb->doneq_index = doneq_index;
+ writel(doneq_index, &phbcmu->reply_post_consumer_index);
+ spin_unlock_irqrestore(&acb->doneq_lock, flags);
+}
+
/*
**********************************************************************************
** Handle a message interrupt
@@ -2694,21 +2816,46 @@ static irqreturn_t arcmsr_hbaE_handle_isr(struct AdapterControlBlock *pACB)
return IRQ_HANDLED;
}
+static irqreturn_t arcmsr_hbaF_handle_isr(struct AdapterControlBlock *pACB)
+{
+ uint32_t host_interrupt_status;
+ struct MessageUnit_F __iomem *phbcmu = pACB->pmuF;
+
+ host_interrupt_status = readl(&phbcmu->host_int_status) &
+ (ARCMSR_HBEMU_OUTBOUND_POSTQUEUE_ISR |
+ ARCMSR_HBEMU_OUTBOUND_DOORBELL_ISR);
+ if (!host_interrupt_status)
+ return IRQ_NONE;
+ do {
+ /* MU post queue interrupts*/
+ if (host_interrupt_status & ARCMSR_HBEMU_OUTBOUND_POSTQUEUE_ISR)
+ arcmsr_hbaF_postqueue_isr(pACB);
+
+ /* MU ioctl transfer doorbell interrupts*/
+ if (host_interrupt_status & ARCMSR_HBEMU_OUTBOUND_DOORBELL_ISR)
+ arcmsr_hbaE_doorbell_isr(pACB);
+
+ host_interrupt_status = readl(&phbcmu->host_int_status);
+ } while (host_interrupt_status & (ARCMSR_HBEMU_OUTBOUND_POSTQUEUE_ISR |
+ ARCMSR_HBEMU_OUTBOUND_DOORBELL_ISR));
+ return IRQ_HANDLED;
+}
+
static irqreturn_t arcmsr_interrupt(struct AdapterControlBlock *acb)
{
switch (acb->adapter_type) {
case ACB_ADAPTER_TYPE_A:
return arcmsr_hbaA_handle_isr(acb);
- break;
case ACB_ADAPTER_TYPE_B:
return arcmsr_hbaB_handle_isr(acb);
- break;
case ACB_ADAPTER_TYPE_C:
return arcmsr_hbaC_handle_isr(acb);
case ACB_ADAPTER_TYPE_D:
return arcmsr_hbaD_handle_isr(acb);
case ACB_ADAPTER_TYPE_E:
return arcmsr_hbaE_handle_isr(acb);
+ case ACB_ADAPTER_TYPE_F:
+ return arcmsr_hbaF_handle_isr(acb);
default:
return IRQ_NONE;
}
@@ -3257,6 +3404,31 @@ static bool arcmsr_hbaE_get_config(struct AdapterControlBlock *pACB)
return true;
}
+static bool arcmsr_hbaF_get_config(struct AdapterControlBlock *pACB)
+{
+ struct MessageUnit_F __iomem *reg = pACB->pmuF;
+ uint32_t intmask_org;
+
+ /* disable all outbound interrupt */
+ intmask_org = readl(®->host_int_mask); /* disable outbound message0 int */
+ writel(intmask_org | ARCMSR_HBEMU_ALL_INTMASKENABLE, ®->host_int_mask);
+ /* wait firmware ready */
+ arcmsr_wait_firmware_ready(pACB);
+ /* post "get config" instruction */
+ writel(ARCMSR_INBOUND_MESG0_GET_CONFIG, ®->inbound_msgaddr0);
+
+ pACB->out_doorbell ^= ARCMSR_HBEMU_DRV2IOP_MESSAGE_CMD_DONE;
+ writel(pACB->out_doorbell, ®->iobound_doorbell);
+ /* wait message ready */
+ if (!arcmsr_hbaE_wait_msgint_ready(pACB)) {
+ pr_notice("arcmsr%d: wait get adapter firmware miscellaneous data timeout\n",
+ pACB->host->host_no);
+ return false;
+ }
+ arcmsr_get_adapter_config(pACB, pACB->msgcode_rwbuffer);
+ return true;
+}
+
static bool arcmsr_get_firmware_spec(struct AdapterControlBlock *acb)
{
bool rtn = false;
@@ -3277,6 +3449,9 @@ static bool arcmsr_get_firmware_spec(struct AdapterControlBlock *acb)
case ACB_ADAPTER_TYPE_E:
rtn = arcmsr_hbaE_get_config(acb);
break;
+ case ACB_ADAPTER_TYPE_F:
+ rtn = arcmsr_hbaF_get_config(acb);
+ break;
default:
break;
}
@@ -3634,23 +3809,20 @@ static int arcmsr_polling_ccbdone(struct AdapterControlBlock *acb,
int rtn = 0;
switch (acb->adapter_type) {
- case ACB_ADAPTER_TYPE_A: {
+ case ACB_ADAPTER_TYPE_A:
rtn = arcmsr_hbaA_polling_ccbdone(acb, poll_ccb);
- }
break;
-
- case ACB_ADAPTER_TYPE_B: {
+ case ACB_ADAPTER_TYPE_B:
rtn = arcmsr_hbaB_polling_ccbdone(acb, poll_ccb);
- }
break;
- case ACB_ADAPTER_TYPE_C: {
+ case ACB_ADAPTER_TYPE_C:
rtn = arcmsr_hbaC_polling_ccbdone(acb, poll_ccb);
- }
break;
case ACB_ADAPTER_TYPE_D:
rtn = arcmsr_hbaD_polling_ccbdone(acb, poll_ccb);
break;
case ACB_ADAPTER_TYPE_E:
+ case ACB_ADAPTER_TYPE_F:
rtn = arcmsr_hbaE_polling_ccbdone(acb, poll_ccb);
break;
}
@@ -3731,6 +3903,16 @@ static void arcmsr_set_iop_datetime(struct timer_list *t)
writel(pacb->out_doorbell, ®->iobound_doorbell);
break;
}
+ case ACB_ADAPTER_TYPE_F: {
+ struct MessageUnit_F __iomem *reg = pacb->pmuF;
+
+ pacb->msgcode_rwbuffer[0] = datetime.b.msg_time[0];
+ pacb->msgcode_rwbuffer[1] = datetime.b.msg_time[1];
+ writel(ARCMSR_INBOUND_MESG0_SYNC_TIMER, ®->inbound_msgaddr0);
+ pacb->out_doorbell ^= ARCMSR_HBEMU_DRV2IOP_MESSAGE_CMD_DONE;
+ writel(pacb->out_doorbell, ®->iobound_doorbell);
+ break;
+ }
}
if (sys_tz.tz_minuteswest)
next_time = ARCMSR_HOURS;
@@ -3756,6 +3938,7 @@ static int arcmsr_iop_confirm(struct AdapterControlBlock *acb)
dma_coherent_handle = acb->dma_coherent_handle2;
break;
case ACB_ADAPTER_TYPE_E:
+ case ACB_ADAPTER_TYPE_F:
dma_coherent_handle = acb->dma_coherent_handle +
offsetof(struct CommandControlBlock, arcmsr_cdb);
break;
@@ -3873,11 +4056,8 @@ static int arcmsr_iop_confirm(struct AdapterControlBlock *acb)
writel(cdb_phyaddr, ®->msgcode_rwbuffer[2]);
writel(cdb_phyaddr_hi32, ®->msgcode_rwbuffer[3]);
writel(acb->ccbsize, ®->msgcode_rwbuffer[4]);
- dma_coherent_handle = acb->dma_coherent_handle2;
- cdb_phyaddr = (uint32_t)(dma_coherent_handle & 0xffffffff);
- cdb_phyaddr_hi32 = (uint32_t)((dma_coherent_handle >> 16) >> 16);
- writel(cdb_phyaddr, ®->msgcode_rwbuffer[5]);
- writel(cdb_phyaddr_hi32, ®->msgcode_rwbuffer[6]);
+ writel(lower_32_bits(acb->dma_coherent_handle2), ®->msgcode_rwbuffer[5]);
+ writel(upper_32_bits(acb->dma_coherent_handle2), ®->msgcode_rwbuffer[6]);
writel(acb->ioqueue_size, ®->msgcode_rwbuffer[7]);
writel(ARCMSR_INBOUND_MESG0_SET_CONFIG, ®->inbound_msgaddr0);
acb->out_doorbell ^= ARCMSR_HBEMU_DRV2IOP_MESSAGE_CMD_DONE;
@@ -3889,6 +4069,27 @@ static int arcmsr_iop_confirm(struct AdapterControlBlock *acb)
}
}
break;
+ case ACB_ADAPTER_TYPE_F: {
+ struct MessageUnit_F __iomem *reg = acb->pmuF;
+
+ acb->msgcode_rwbuffer[0] = ARCMSR_SIGNATURE_SET_CONFIG;
+ acb->msgcode_rwbuffer[1] = ARCMSR_SIGNATURE_1886;
+ acb->msgcode_rwbuffer[2] = cdb_phyaddr;
+ acb->msgcode_rwbuffer[3] = cdb_phyaddr_hi32;
+ acb->msgcode_rwbuffer[4] = acb->ccbsize;
+ acb->msgcode_rwbuffer[5] = lower_32_bits(acb->dma_coherent_handle2);
+ acb->msgcode_rwbuffer[6] = upper_32_bits(acb->dma_coherent_handle2);
+ acb->msgcode_rwbuffer[7] = acb->completeQ_size;
+ writel(ARCMSR_INBOUND_MESG0_SET_CONFIG, ®->inbound_msgaddr0);
+ acb->out_doorbell ^= ARCMSR_HBEMU_DRV2IOP_MESSAGE_CMD_DONE;
+ writel(acb->out_doorbell, ®->iobound_doorbell);
+ if (!arcmsr_hbaE_wait_msgint_ready(acb)) {
+ pr_notice("arcmsr%d: 'set command Q window' timeout\n",
+ acb->host->host_no);
+ return 1;
+ }
+ }
+ break;
}
return 0;
}
@@ -3937,7 +4138,8 @@ static void arcmsr_wait_firmware_ready(struct AdapterControlBlock *acb)
ARCMSR_ARC1214_MESSAGE_FIRMWARE_OK) == 0);
}
break;
- case ACB_ADAPTER_TYPE_E: {
+ case ACB_ADAPTER_TYPE_E:
+ case ACB_ADAPTER_TYPE_F: {
struct MessageUnit_E __iomem *reg = acb->pmuE;
do {
if (!(acb->acb_flags & ACB_F_IOP_INITED))
@@ -3952,24 +4154,10 @@ static void arcmsr_wait_firmware_ready(struct AdapterControlBlock *acb)
static void arcmsr_request_device_map(struct timer_list *t)
{
struct AdapterControlBlock *acb = from_timer(acb, t, eternal_timer);
- if (unlikely(atomic_read(&acb->rq_map_token) == 0) ||
- (acb->acb_flags & ACB_F_BUS_RESET) ||
- (acb->acb_flags & ACB_F_ABORT)) {
- mod_timer(&acb->eternal_timer,
- jiffies + msecs_to_jiffies(6 * HZ));
+ if (acb->acb_flags & (ACB_F_MSG_GET_CONFIG | ACB_F_BUS_RESET | ACB_F_ABORT)) {
+ mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ));
} else {
acb->fw_flag = FW_NORMAL;
- if (atomic_read(&acb->ante_token_value) ==
- atomic_read(&acb->rq_map_token)) {
- atomic_set(&acb->rq_map_token, 16);
- }
- atomic_set(&acb->ante_token_value,
- atomic_read(&acb->rq_map_token));
- if (atomic_dec_and_test(&acb->rq_map_token)) {
- mod_timer(&acb->eternal_timer, jiffies +
- msecs_to_jiffies(6 * HZ));
- return;
- }
switch (acb->adapter_type) {
case ACB_ADAPTER_TYPE_A: {
struct MessageUnit_A __iomem *reg = acb->pmuA;
@@ -3999,10 +4187,23 @@ static void arcmsr_request_device_map(struct timer_list *t)
writel(acb->out_doorbell, ®->iobound_doorbell);
break;
}
+ case ACB_ADAPTER_TYPE_F: {
+ struct MessageUnit_F __iomem *reg = acb->pmuF;
+ uint32_t outMsg1 = readl(®->outbound_msgaddr1);
+
+ if (!(outMsg1 & ARCMSR_HBFMU_MESSAGE_FIRMWARE_OK) ||
+ (outMsg1 & ARCMSR_HBFMU_MESSAGE_NO_VOLUME_CHANGE))
+ goto nxt6s;
+ writel(ARCMSR_INBOUND_MESG0_GET_CONFIG, ®->inbound_msgaddr0);
+ acb->out_doorbell ^= ARCMSR_HBEMU_DRV2IOP_MESSAGE_CMD_DONE;
+ writel(acb->out_doorbell, ®->iobound_doorbell);
+ break;
+ }
default:
return;
}
acb->acb_flags |= ACB_F_MSG_GET_CONFIG;
+nxt6s:
mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ));
}
}
@@ -4084,6 +4285,7 @@ static void arcmsr_start_adapter_bgrb(struct AdapterControlBlock *acb)
arcmsr_hbaD_start_bgrb(acb);
break;
case ACB_ADAPTER_TYPE_E:
+ case ACB_ADAPTER_TYPE_F:
arcmsr_hbaE_start_bgrb(acb);
break;
}
@@ -4163,7 +4365,8 @@ static void arcmsr_clear_doorbell_queue_buffer(struct AdapterControlBlock *acb)
}
}
break;
- case ACB_ADAPTER_TYPE_E: {
+ case ACB_ADAPTER_TYPE_E:
+ case ACB_ADAPTER_TYPE_F: {
struct MessageUnit_E __iomem *reg = acb->pmuE;
uint32_t i, tmp;
@@ -4290,7 +4493,8 @@ static bool arcmsr_reset_in_progress(struct AdapterControlBlock *acb)
true : false;
}
break;
- case ACB_ADAPTER_TYPE_E:{
+ case ACB_ADAPTER_TYPE_E:
+ case ACB_ADAPTER_TYPE_F:{
struct MessageUnit_E __iomem *reg = acb->pmuE;
rtn = (readl(®->host_diagnostic_3xxx) &
ARCMSR_ARC188X_RESET_ADAPTER) ? true : false;
@@ -4389,8 +4593,6 @@ static int arcmsr_bus_reset(struct scsi_cmnd *cmd)
goto wait_reset_done;
}
arcmsr_iop_init(acb);
- atomic_set(&acb->rq_map_token, 16);
- atomic_set(&acb->ante_token_value, 16);
acb->fw_flag = FW_NORMAL;
mod_timer(&acb->eternal_timer, jiffies +
msecs_to_jiffies(6 * HZ));
@@ -4399,8 +4601,6 @@ static int arcmsr_bus_reset(struct scsi_cmnd *cmd)
pr_notice("arcmsr: scsi bus reset eh returns with success\n");
} else {
acb->acb_flags &= ~ACB_F_BUS_RESET;
- atomic_set(&acb->rq_map_token, 16);
- atomic_set(&acb->ante_token_value, 16);
acb->fw_flag = FW_NORMAL;
mod_timer(&acb->eternal_timer, jiffies +
msecs_to_jiffies(6 * HZ));
@@ -4493,6 +4693,9 @@ static const char *arcmsr_info(struct Scsi_Host *host)
case PCI_DEVICE_ID_ARECA_1884:
type = "SAS/SATA";
break;
+ case PCI_DEVICE_ID_ARECA_1886:
+ type = "NVMe/SAS/SATA";
+ break;
default:
type = "unknown";
raid6 = 0;
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index bc5d84f..440ef32 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -749,6 +749,7 @@ bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad)
if (bfad->pci_bar0_kva == NULL) {
printk(KERN_ERR "Fail to map bar0\n");
+ rc = -ENODEV;
goto out_release_region;
}
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 0c251a3..fa16894 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -4721,30 +4721,7 @@ static struct pci_driver dc395x_driver = {
.probe = dc395x_init_one,
.remove = dc395x_remove_one,
};
-
-
-/**
- * dc395x_module_init - Module initialization function
- *
- * Used by both module and built-in driver to initialise this driver.
- **/
-static int __init dc395x_module_init(void)
-{
- return pci_register_driver(&dc395x_driver);
-}
-
-
-/**
- * dc395x_module_exit - Module cleanup function.
- **/
-static void __exit dc395x_module_exit(void)
-{
- pci_unregister_driver(&dc395x_driver);
-}
-
-
-module_init(dc395x_module_init);
-module_exit(dc395x_module_exit);
+module_pci_driver(dc395x_driver);
MODULE_AUTHOR("C.L. Huang / Erich Chen / Kurt Garloff");
MODULE_DESCRIPTION("SCSI host adapter driver for Tekram TRM-S1040 based adapters: Tekram DC395 and DC315 series");
diff --git a/drivers/scsi/fcoe/fcoe_sysfs.c b/drivers/scsi/fcoe/fcoe_sysfs.c
index 2cb7a8c..ffef2c8 100644
--- a/drivers/scsi/fcoe/fcoe_sysfs.c
+++ b/drivers/scsi/fcoe/fcoe_sysfs.c
@@ -1053,16 +1053,10 @@ EXPORT_SYMBOL_GPL(fcoe_fcf_device_add);
int __init fcoe_sysfs_setup(void)
{
- int error;
-
atomic_set(&ctlr_num, 0);
atomic_set(&fcf_num, 0);
- error = bus_register(&fcoe_bus_type);
- if (error)
- return error;
-
- return 0;
+ return bus_register(&fcoe_bus_type);
}
void __exit fcoe_sysfs_teardown(void)
diff --git a/drivers/scsi/fnic/vnic_wq_copy.c b/drivers/scsi/fnic/vnic_wq_copy.c
index 9eab7e7..7b18635 100644
--- a/drivers/scsi/fnic/vnic_wq_copy.c
+++ b/drivers/scsi/fnic/vnic_wq_copy.c
@@ -79,8 +79,6 @@ int vnic_wq_copy_alloc(struct vnic_dev *vdev, struct vnic_wq_copy *wq,
unsigned int index, unsigned int desc_count,
unsigned int desc_size)
{
- int err;
-
wq->index = index;
wq->vdev = vdev;
wq->to_use_index = wq->to_clean_index = 0;
@@ -92,11 +90,7 @@ int vnic_wq_copy_alloc(struct vnic_dev *vdev, struct vnic_wq_copy *wq,
vnic_wq_copy_disable(wq);
- err = vnic_dev_alloc_desc_ring(vdev, &wq->ring, desc_count, desc_size);
- if (err)
- return err;
-
- return 0;
+ return vnic_dev_alloc_desc_ring(vdev, &wq->ring, desc_count, desc_size);
}
void vnic_wq_copy_init(struct vnic_wq_copy *wq, unsigned int cq_index,
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index dc0e177..5d80138 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -3168,81 +3168,6 @@ static inline void gdth_timer_init(void)
}
#endif
-static void __init internal_setup(char *str,int *ints)
-{
- int i;
- char *cur_str, *argv;
-
- TRACE2(("internal_setup() str %s ints[0] %d\n",
- str ? str:"NULL", ints ? ints[0]:0));
-
- /* analyse string */
- argv = str;
- while (argv && (cur_str = strchr(argv, ':'))) {
- int val = 0, c = *++cur_str;
-
- if (c == 'n' || c == 'N')
- val = 0;
- else if (c == 'y' || c == 'Y')
- val = 1;
- else
- val = (int)simple_strtoul(cur_str, NULL, 0);
-
- if (!strncmp(argv, "disable:", 8))
- disable = val;
- else if (!strncmp(argv, "reserve_mode:", 13))
- reserve_mode = val;
- else if (!strncmp(argv, "reverse_scan:", 13))
- reverse_scan = val;
- else if (!strncmp(argv, "hdr_channel:", 12))
- hdr_channel = val;
- else if (!strncmp(argv, "max_ids:", 8))
- max_ids = val;
- else if (!strncmp(argv, "rescan:", 7))
- rescan = val;
- else if (!strncmp(argv, "shared_access:", 14))
- shared_access = val;
- else if (!strncmp(argv, "reserve_list:", 13)) {
- reserve_list[0] = val;
- for (i = 1; i < MAX_RES_ARGS; i++) {
- cur_str = strchr(cur_str, ',');
- if (!cur_str)
- break;
- if (!isdigit((int)*++cur_str)) {
- --cur_str;
- break;
- }
- reserve_list[i] =
- (int)simple_strtoul(cur_str, NULL, 0);
- }
- if (!cur_str)
- break;
- argv = ++cur_str;
- continue;
- }
-
- if ((argv = strchr(argv, ',')))
- ++argv;
- }
-}
-
-int __init option_setup(char *str)
-{
- int ints[MAXHA];
- char *cur = str;
- int i = 1;
-
- TRACE2(("option_setup() str %s\n", str ? str:"NULL"));
-
- while (cur && isdigit(*cur) && i < MAXHA) {
- ints[i++] = simple_strtoul(cur, NULL, 0);
- if ((cur = strchr(cur, ',')) != NULL) cur++;
- }
-
- ints[0] = i - 1;
- internal_setup(cur, ints);
- return 1;
-}
static const char *gdth_ctr_name(gdth_ha_str *ha)
{
@@ -4317,5 +4242,81 @@ module_init(gdth_init);
module_exit(gdth_exit);
#ifndef MODULE
+static void __init internal_setup(char *str,int *ints)
+{
+ int i;
+ char *cur_str, *argv;
+
+ TRACE2(("internal_setup() str %s ints[0] %d\n",
+ str ? str:"NULL", ints ? ints[0]:0));
+
+ /* analyse string */
+ argv = str;
+ while (argv && (cur_str = strchr(argv, ':'))) {
+ int val = 0, c = *++cur_str;
+
+ if (c == 'n' || c == 'N')
+ val = 0;
+ else if (c == 'y' || c == 'Y')
+ val = 1;
+ else
+ val = (int)simple_strtoul(cur_str, NULL, 0);
+
+ if (!strncmp(argv, "disable:", 8))
+ disable = val;
+ else if (!strncmp(argv, "reserve_mode:", 13))
+ reserve_mode = val;
+ else if (!strncmp(argv, "reverse_scan:", 13))
+ reverse_scan = val;
+ else if (!strncmp(argv, "hdr_channel:", 12))
+ hdr_channel = val;
+ else if (!strncmp(argv, "max_ids:", 8))
+ max_ids = val;
+ else if (!strncmp(argv, "rescan:", 7))
+ rescan = val;
+ else if (!strncmp(argv, "shared_access:", 14))
+ shared_access = val;
+ else if (!strncmp(argv, "reserve_list:", 13)) {
+ reserve_list[0] = val;
+ for (i = 1; i < MAX_RES_ARGS; i++) {
+ cur_str = strchr(cur_str, ',');
+ if (!cur_str)
+ break;
+ if (!isdigit((int)*++cur_str)) {
+ --cur_str;
+ break;
+ }
+ reserve_list[i] =
+ (int)simple_strtoul(cur_str, NULL, 0);
+ }
+ if (!cur_str)
+ break;
+ argv = ++cur_str;
+ continue;
+ }
+
+ if ((argv = strchr(argv, ',')))
+ ++argv;
+ }
+}
+
+static int __init option_setup(char *str)
+{
+ int ints[MAXHA];
+ char *cur = str;
+ int i = 1;
+
+ TRACE2(("option_setup() str %s\n", str ? str:"NULL"));
+
+ while (cur && isdigit(*cur) && i < MAXHA) {
+ ints[i++] = simple_strtoul(cur, NULL, 0);
+ if ((cur = strchr(cur, ',')) != NULL) cur++;
+ }
+
+ ints[0] = i - 1;
+ internal_setup(cur, ints);
+ return 1;
+}
+
__setup("gdth=", option_setup);
#endif
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index 1d39628..ca16ef4 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -2962,20 +2962,8 @@ static struct pci_driver initio_pci_driver = {
.probe = initio_probe_one,
.remove = initio_remove_one,
};
-
-static int __init initio_init_driver(void)
-{
- return pci_register_driver(&initio_pci_driver);
-}
-
-static void __exit initio_exit_driver(void)
-{
- pci_unregister_driver(&initio_pci_driver);
-}
+module_pci_driver(initio_pci_driver);
MODULE_DESCRIPTION("Initio INI-9X00U/UW SCSI device driver");
MODULE_AUTHOR("Initio Corporation");
MODULE_LICENSE("GPL");
-
-module_init(initio_init_driver);
-module_exit(initio_exit_driver);
diff --git a/drivers/scsi/isci/remote_node_table.h b/drivers/scsi/isci/remote_node_table.h
index 721ab98..0ddfdda 100644
--- a/drivers/scsi/isci/remote_node_table.h
+++ b/drivers/scsi/isci/remote_node_table.h
@@ -61,7 +61,7 @@
/**
*
*
- * Remote node sets are sets of remote node index in the remtoe node table The
+ * Remote node sets are sets of remote node index in the remote node table. The
* SCU hardware requires that STP remote node entries take three consecutive
* remote node index so the table is arranged in sets of three. The bits are
* used as 0111 0111 to make a byte and the bits define the set of three remote
diff --git a/drivers/scsi/myrb.c b/drivers/scsi/myrb.c
index cbf1e8b..5fa0f4e 100644
--- a/drivers/scsi/myrb.c
+++ b/drivers/scsi/myrb.c
@@ -1050,7 +1050,7 @@ static int myrb_get_hba_config(struct myrb_hba *cb)
enquiry2->fw.turn_id = 0;
}
snprintf(cb->fw_version, sizeof(cb->fw_version),
- "%d.%02d-%c-%02d",
+ "%u.%02u-%c-%02u",
enquiry2->fw.major_version,
enquiry2->fw.minor_version,
enquiry2->fw.firmware_type,
@@ -2167,7 +2167,7 @@ static ssize_t ctlr_num_show(struct device *dev,
struct Scsi_Host *shost = class_to_shost(dev);
struct myrb_hba *cb = shost_priv(shost);
- return snprintf(buf, 20, "%d\n", cb->ctlr_num);
+ return snprintf(buf, 20, "%u\n", cb->ctlr_num);
}
static DEVICE_ATTR_RO(ctlr_num);
@@ -2732,7 +2732,6 @@ static int DAC960_LA_hw_init(struct pci_dev *pdev,
DAC960_LA_disable_intr(base);
DAC960_LA_ack_hw_mbox_status(base);
udelay(1000);
- timeout = 0;
while (DAC960_LA_init_in_progress(base) &&
timeout < MYRB_MAILBOX_TIMEOUT) {
if (DAC960_LA_read_error_status(base, &error,
diff --git a/drivers/scsi/pm8001/pm8001_ctl.c b/drivers/scsi/pm8001/pm8001_ctl.c
index 77c805d..3587f7c 100644
--- a/drivers/scsi/pm8001/pm8001_ctl.c
+++ b/drivers/scsi/pm8001/pm8001_ctl.c
@@ -408,9 +408,10 @@ static ssize_t pm8001_ctl_ib_queue_log_show(struct device *cdev,
int offset;
char *str = buf;
int start = 0;
+ u32 ib_offset = pm8001_ha->ib_offset;
#define IB_MEMMAP(c) \
(*(u32 *)((u8 *)pm8001_ha-> \
- memoryMap.region[IB].virt_ptr + \
+ memoryMap.region[ib_offset].virt_ptr + \
pm8001_ha->evtlog_ib_offset + (c)))
for (offset = 0; offset < IB_OB_READ_TIMES; offset++) {
@@ -442,9 +443,10 @@ static ssize_t pm8001_ctl_ob_queue_log_show(struct device *cdev,
int offset;
char *str = buf;
int start = 0;
+ u32 ob_offset = pm8001_ha->ob_offset;
#define OB_MEMMAP(c) \
(*(u32 *)((u8 *)pm8001_ha-> \
- memoryMap.region[OB].virt_ptr + \
+ memoryMap.region[ob_offset].virt_ptr + \
pm8001_ha->evtlog_ob_offset + (c)))
for (offset = 0; offset < IB_OB_READ_TIMES; offset++) {
diff --git a/drivers/scsi/pm8001/pm8001_defs.h b/drivers/scsi/pm8001/pm8001_defs.h
index 1c7f15f..501b574 100644
--- a/drivers/scsi/pm8001/pm8001_defs.h
+++ b/drivers/scsi/pm8001/pm8001_defs.h
@@ -75,12 +75,10 @@ enum port_type {
};
/* driver compile-time configuration */
-#define PM8001_MAX_CCB 256 /* max ccbs supported */
+#define PM8001_MAX_CCB 1024 /* max ccbs supported */
#define PM8001_MPI_QUEUE 1024 /* maximum mpi queue entries */
-#define PM8001_MAX_INB_NUM 1
-#define PM8001_MAX_OUTB_NUM 1
-#define PM8001_MAX_SPCV_INB_NUM 1
-#define PM8001_MAX_SPCV_OUTB_NUM 4
+#define PM8001_MAX_INB_NUM 64
+#define PM8001_MAX_OUTB_NUM 64
#define PM8001_CAN_QUEUE 508 /* SCSI Queue depth */
/* Inbound/Outbound queue size */
@@ -92,26 +90,27 @@ enum port_type {
#define PM8001_MAX_PORTS 16 /* max. possible ports */
#define PM8001_MAX_DEVICES 2048 /* max supported device */
#define PM8001_MAX_MSIX_VEC 64 /* max msi-x int for spcv/ve */
+#define PM8001_RESERVE_SLOT 8
-#define USI_MAX_MEMCNT_BASE 5
-#define IB (USI_MAX_MEMCNT_BASE + 1)
-#define CI (IB + PM8001_MAX_SPCV_INB_NUM)
-#define OB (CI + PM8001_MAX_SPCV_INB_NUM)
-#define PI (OB + PM8001_MAX_SPCV_OUTB_NUM)
-#define USI_MAX_MEMCNT (PI + PM8001_MAX_SPCV_OUTB_NUM)
#define CONFIG_SCSI_PM8001_MAX_DMA_SG 528
#define PM8001_MAX_DMA_SG CONFIG_SCSI_PM8001_MAX_DMA_SG
+
enum memory_region_num {
AAP1 = 0x0, /* application acceleration processor */
IOP, /* IO processor */
NVMD, /* NVM device */
- DEV_MEM, /* memory for devices */
- CCB_MEM, /* memory for command control block */
FW_FLASH, /* memory for fw flash update */
- FORENSIC_MEM /* memory for fw forensic data */
+ FORENSIC_MEM, /* memory for fw forensic data */
+ USI_MAX_MEMCNT_BASE
};
#define PM8001_EVENT_LOG_SIZE (128 * 1024)
+/**
+ * maximum DMA memory regions(number of IBQ + number of IBQ CI
+ * + number of OBQ + number of OBQ PI)
+ */
+#define USI_MAX_MEMCNT (USI_MAX_MEMCNT_BASE + ((2 * PM8001_MAX_INB_NUM) \
+ + (2 * PM8001_MAX_OUTB_NUM)))
/*error code*/
enum mpi_err {
MPI_IO_STATUS_SUCCESS = 0x0,
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index e9a9392..2b7b295 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -189,6 +189,10 @@ static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
u32 offsetib, offsetob;
void __iomem *addressib = pm8001_ha->inbnd_q_tbl_addr;
void __iomem *addressob = pm8001_ha->outbnd_q_tbl_addr;
+ u32 ib_offset = pm8001_ha->ib_offset;
+ u32 ob_offset = pm8001_ha->ob_offset;
+ u32 ci_offset = pm8001_ha->ci_offset;
+ u32 pi_offset = pm8001_ha->pi_offset;
pm8001_ha->main_cfg_tbl.pm8001_tbl.inbound_q_nppd_hppd = 0;
pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_hw_event_pid0_3 = 0;
@@ -223,19 +227,19 @@ static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt =
PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x00<<30);
pm8001_ha->inbnd_q_tbl[i].upper_base_addr =
- pm8001_ha->memoryMap.region[IB + i].phys_addr_hi;
+ pm8001_ha->memoryMap.region[ib_offset + i].phys_addr_hi;
pm8001_ha->inbnd_q_tbl[i].lower_base_addr =
- pm8001_ha->memoryMap.region[IB + i].phys_addr_lo;
+ pm8001_ha->memoryMap.region[ib_offset + i].phys_addr_lo;
pm8001_ha->inbnd_q_tbl[i].base_virt =
- (u8 *)pm8001_ha->memoryMap.region[IB + i].virt_ptr;
+ (u8 *)pm8001_ha->memoryMap.region[ib_offset + i].virt_ptr;
pm8001_ha->inbnd_q_tbl[i].total_length =
- pm8001_ha->memoryMap.region[IB + i].total_len;
+ pm8001_ha->memoryMap.region[ib_offset + i].total_len;
pm8001_ha->inbnd_q_tbl[i].ci_upper_base_addr =
- pm8001_ha->memoryMap.region[CI + i].phys_addr_hi;
+ pm8001_ha->memoryMap.region[ci_offset + i].phys_addr_hi;
pm8001_ha->inbnd_q_tbl[i].ci_lower_base_addr =
- pm8001_ha->memoryMap.region[CI + i].phys_addr_lo;
+ pm8001_ha->memoryMap.region[ci_offset + i].phys_addr_lo;
pm8001_ha->inbnd_q_tbl[i].ci_virt =
- pm8001_ha->memoryMap.region[CI + i].virt_ptr;
+ pm8001_ha->memoryMap.region[ci_offset + i].virt_ptr;
offsetib = i * 0x20;
pm8001_ha->inbnd_q_tbl[i].pi_pci_bar =
get_pci_bar_index(pm8001_mr32(addressib,
@@ -249,21 +253,21 @@ static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
pm8001_ha->outbnd_q_tbl[i].element_size_cnt =
PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x01<<30);
pm8001_ha->outbnd_q_tbl[i].upper_base_addr =
- pm8001_ha->memoryMap.region[OB + i].phys_addr_hi;
+ pm8001_ha->memoryMap.region[ob_offset + i].phys_addr_hi;
pm8001_ha->outbnd_q_tbl[i].lower_base_addr =
- pm8001_ha->memoryMap.region[OB + i].phys_addr_lo;
+ pm8001_ha->memoryMap.region[ob_offset + i].phys_addr_lo;
pm8001_ha->outbnd_q_tbl[i].base_virt =
- (u8 *)pm8001_ha->memoryMap.region[OB + i].virt_ptr;
+ (u8 *)pm8001_ha->memoryMap.region[ob_offset + i].virt_ptr;
pm8001_ha->outbnd_q_tbl[i].total_length =
- pm8001_ha->memoryMap.region[OB + i].total_len;
+ pm8001_ha->memoryMap.region[ob_offset + i].total_len;
pm8001_ha->outbnd_q_tbl[i].pi_upper_base_addr =
- pm8001_ha->memoryMap.region[PI + i].phys_addr_hi;
+ pm8001_ha->memoryMap.region[pi_offset + i].phys_addr_hi;
pm8001_ha->outbnd_q_tbl[i].pi_lower_base_addr =
- pm8001_ha->memoryMap.region[PI + i].phys_addr_lo;
+ pm8001_ha->memoryMap.region[pi_offset + i].phys_addr_lo;
pm8001_ha->outbnd_q_tbl[i].interrup_vec_cnt_delay =
0 | (10 << 16) | (i << 24);
pm8001_ha->outbnd_q_tbl[i].pi_virt =
- pm8001_ha->memoryMap.region[PI + i].virt_ptr;
+ pm8001_ha->memoryMap.region[pi_offset + i].virt_ptr;
offsetob = i * 0x24;
pm8001_ha->outbnd_q_tbl[i].ci_pci_bar =
get_pci_bar_index(pm8001_mr32(addressob,
@@ -4371,8 +4375,7 @@ static int pm8001_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
/* fill in PRD (scatter/gather) table, if any */
if (task->num_scatter > 1) {
pm8001_chip_make_sg(task->scatter, ccb->n_elem, ccb->buf_prd);
- phys_addr = ccb->ccb_dma_handle +
- offsetof(struct pm8001_ccb_info, buf_prd[0]);
+ phys_addr = ccb->ccb_dma_handle;
ssp_cmd.addr_low = cpu_to_le32(lower_32_bits(phys_addr));
ssp_cmd.addr_high = cpu_to_le32(upper_32_bits(phys_addr));
ssp_cmd.esgl = cpu_to_le32(1<<31);
@@ -4445,8 +4448,7 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
/* fill in PRD (scatter/gather) table, if any */
if (task->num_scatter > 1) {
pm8001_chip_make_sg(task->scatter, ccb->n_elem, ccb->buf_prd);
- phys_addr = ccb->ccb_dma_handle +
- offsetof(struct pm8001_ccb_info, buf_prd[0]);
+ phys_addr = ccb->ccb_dma_handle;
sata_cmd.addr_low = lower_32_bits(phys_addr);
sata_cmd.addr_high = upper_32_bits(phys_addr);
sata_cmd.esgl = cpu_to_le32(1 << 31);
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 20fa96c..3cf3e58 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -56,6 +56,7 @@ MODULE_PARM_DESC(link_rate, "Enable link rate.\n"
" 8: Link rate 12.0G\n");
static struct scsi_transport_template *pm8001_stt;
+static int pm8001_init_ccb_tag(struct pm8001_hba_info *, struct Scsi_Host *, struct pci_dev *);
/*
* chip info structure to identify chip key functionality as
@@ -264,12 +265,36 @@ static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha);
static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
const struct pci_device_id *ent)
{
- int i;
+ int i, count = 0, rc = 0;
+ u32 ci_offset, ib_offset, ob_offset, pi_offset;
+ struct inbound_queue_table *circularQ;
+
spin_lock_init(&pm8001_ha->lock);
spin_lock_init(&pm8001_ha->bitmap_lock);
PM8001_INIT_DBG(pm8001_ha,
pm8001_printk("pm8001_alloc: PHY:%x\n",
pm8001_ha->chip->n_phy));
+
+ /* Setup Interrupt */
+ rc = pm8001_setup_irq(pm8001_ha);
+ if (rc) {
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+ "pm8001_setup_irq failed [ret: %d]\n", rc));
+ goto err_out_shost;
+ }
+ /* Request Interrupt */
+ rc = pm8001_request_irq(pm8001_ha);
+ if (rc)
+ goto err_out_shost;
+
+ count = pm8001_ha->max_q_num;
+ /* Queues are chosen based on the number of cores/msix availability */
+ ib_offset = pm8001_ha->ib_offset = USI_MAX_MEMCNT_BASE;
+ ci_offset = pm8001_ha->ci_offset = ib_offset + count;
+ ob_offset = pm8001_ha->ob_offset = ci_offset + count;
+ pi_offset = pm8001_ha->pi_offset = ob_offset + count;
+ pm8001_ha->max_memcnt = pi_offset + count;
+
for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
pm8001_phy_init(pm8001_ha, i);
pm8001_ha->port[i].wide_port_phymap = 0;
@@ -278,9 +303,6 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
INIT_LIST_HEAD(&pm8001_ha->port[i].list);
}
- pm8001_ha->tags = kzalloc(PM8001_MAX_CCB, GFP_KERNEL);
- if (!pm8001_ha->tags)
- goto err_out;
/* MPI Memory region 1 for AAP Event Log for fw */
pm8001_ha->memoryMap.region[AAP1].num_elements = 1;
pm8001_ha->memoryMap.region[AAP1].element_size = PM8001_EVENT_LOG_SIZE;
@@ -293,54 +315,62 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
pm8001_ha->memoryMap.region[IOP].total_len = PM8001_EVENT_LOG_SIZE;
pm8001_ha->memoryMap.region[IOP].alignment = 32;
- for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) {
+ for (i = 0; i < count; i++) {
+ circularQ = &pm8001_ha->inbnd_q_tbl[i];
+ spin_lock_init(&circularQ->iq_lock);
/* MPI Memory region 3 for consumer Index of inbound queues */
- pm8001_ha->memoryMap.region[CI+i].num_elements = 1;
- pm8001_ha->memoryMap.region[CI+i].element_size = 4;
- pm8001_ha->memoryMap.region[CI+i].total_len = 4;
- pm8001_ha->memoryMap.region[CI+i].alignment = 4;
+ pm8001_ha->memoryMap.region[ci_offset+i].num_elements = 1;
+ pm8001_ha->memoryMap.region[ci_offset+i].element_size = 4;
+ pm8001_ha->memoryMap.region[ci_offset+i].total_len = 4;
+ pm8001_ha->memoryMap.region[ci_offset+i].alignment = 4;
if ((ent->driver_data) != chip_8001) {
/* MPI Memory region 5 inbound queues */
- pm8001_ha->memoryMap.region[IB+i].num_elements =
+ pm8001_ha->memoryMap.region[ib_offset+i].num_elements =
PM8001_MPI_QUEUE;
- pm8001_ha->memoryMap.region[IB+i].element_size = 128;
- pm8001_ha->memoryMap.region[IB+i].total_len =
+ pm8001_ha->memoryMap.region[ib_offset+i].element_size
+ = 128;
+ pm8001_ha->memoryMap.region[ib_offset+i].total_len =
PM8001_MPI_QUEUE * 128;
- pm8001_ha->memoryMap.region[IB+i].alignment = 128;
+ pm8001_ha->memoryMap.region[ib_offset+i].alignment
+ = 128;
} else {
- pm8001_ha->memoryMap.region[IB+i].num_elements =
+ pm8001_ha->memoryMap.region[ib_offset+i].num_elements =
PM8001_MPI_QUEUE;
- pm8001_ha->memoryMap.region[IB+i].element_size = 64;
- pm8001_ha->memoryMap.region[IB+i].total_len =
+ pm8001_ha->memoryMap.region[ib_offset+i].element_size
+ = 64;
+ pm8001_ha->memoryMap.region[ib_offset+i].total_len =
PM8001_MPI_QUEUE * 64;
- pm8001_ha->memoryMap.region[IB+i].alignment = 64;
+ pm8001_ha->memoryMap.region[ib_offset+i].alignment = 64;
}
}
- for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) {
+ for (i = 0; i < count; i++) {
/* MPI Memory region 4 for producer Index of outbound queues */
- pm8001_ha->memoryMap.region[PI+i].num_elements = 1;
- pm8001_ha->memoryMap.region[PI+i].element_size = 4;
- pm8001_ha->memoryMap.region[PI+i].total_len = 4;
- pm8001_ha->memoryMap.region[PI+i].alignment = 4;
+ pm8001_ha->memoryMap.region[pi_offset+i].num_elements = 1;
+ pm8001_ha->memoryMap.region[pi_offset+i].element_size = 4;
+ pm8001_ha->memoryMap.region[pi_offset+i].total_len = 4;
+ pm8001_ha->memoryMap.region[pi_offset+i].alignment = 4;
if (ent->driver_data != chip_8001) {
/* MPI Memory region 6 Outbound queues */
- pm8001_ha->memoryMap.region[OB+i].num_elements =
+ pm8001_ha->memoryMap.region[ob_offset+i].num_elements =
PM8001_MPI_QUEUE;
- pm8001_ha->memoryMap.region[OB+i].element_size = 128;
- pm8001_ha->memoryMap.region[OB+i].total_len =
+ pm8001_ha->memoryMap.region[ob_offset+i].element_size
+ = 128;
+ pm8001_ha->memoryMap.region[ob_offset+i].total_len =
PM8001_MPI_QUEUE * 128;
- pm8001_ha->memoryMap.region[OB+i].alignment = 128;
+ pm8001_ha->memoryMap.region[ob_offset+i].alignment
+ = 128;
} else {
/* MPI Memory region 6 Outbound queues */
- pm8001_ha->memoryMap.region[OB+i].num_elements =
+ pm8001_ha->memoryMap.region[ob_offset+i].num_elements =
PM8001_MPI_QUEUE;
- pm8001_ha->memoryMap.region[OB+i].element_size = 64;
- pm8001_ha->memoryMap.region[OB+i].total_len =
+ pm8001_ha->memoryMap.region[ob_offset+i].element_size
+ = 64;
+ pm8001_ha->memoryMap.region[ob_offset+i].total_len =
PM8001_MPI_QUEUE * 64;
- pm8001_ha->memoryMap.region[OB+i].alignment = 64;
+ pm8001_ha->memoryMap.region[ob_offset+i].alignment = 64;
}
}
@@ -348,19 +378,6 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
pm8001_ha->memoryMap.region[NVMD].num_elements = 1;
pm8001_ha->memoryMap.region[NVMD].element_size = 4096;
pm8001_ha->memoryMap.region[NVMD].total_len = 4096;
- /* Memory region for devices*/
- pm8001_ha->memoryMap.region[DEV_MEM].num_elements = 1;
- pm8001_ha->memoryMap.region[DEV_MEM].element_size = PM8001_MAX_DEVICES *
- sizeof(struct pm8001_device);
- pm8001_ha->memoryMap.region[DEV_MEM].total_len = PM8001_MAX_DEVICES *
- sizeof(struct pm8001_device);
-
- /* Memory region for ccb_info*/
- pm8001_ha->memoryMap.region[CCB_MEM].num_elements = 1;
- pm8001_ha->memoryMap.region[CCB_MEM].element_size = PM8001_MAX_CCB *
- sizeof(struct pm8001_ccb_info);
- pm8001_ha->memoryMap.region[CCB_MEM].total_len = PM8001_MAX_CCB *
- sizeof(struct pm8001_ccb_info);
/* Memory region for fw flash */
pm8001_ha->memoryMap.region[FW_FLASH].total_len = 4096;
@@ -369,7 +386,7 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
pm8001_ha->memoryMap.region[FORENSIC_MEM].total_len = 0x10000;
pm8001_ha->memoryMap.region[FORENSIC_MEM].element_size = 0x10000;
pm8001_ha->memoryMap.region[FORENSIC_MEM].alignment = 0x10000;
- for (i = 0; i < USI_MAX_MEMCNT; i++) {
+ for (i = 0; i < pm8001_ha->max_memcnt; i++) {
if (pm8001_mem_alloc(pm8001_ha->pdev,
&pm8001_ha->memoryMap.region[i].virt_ptr,
&pm8001_ha->memoryMap.region[i].phys_addr,
@@ -384,27 +401,36 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
}
}
- pm8001_ha->devices = pm8001_ha->memoryMap.region[DEV_MEM].virt_ptr;
+ /* Memory region for devices*/
+ pm8001_ha->devices = kzalloc(PM8001_MAX_DEVICES
+ * sizeof(struct pm8001_device), GFP_KERNEL);
+ if (!pm8001_ha->devices) {
+ rc = -ENOMEM;
+ goto err_out_nodev;
+ }
for (i = 0; i < PM8001_MAX_DEVICES; i++) {
pm8001_ha->devices[i].dev_type = SAS_PHY_UNUSED;
pm8001_ha->devices[i].id = i;
pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
pm8001_ha->devices[i].running_req = 0;
}
- pm8001_ha->ccb_info = pm8001_ha->memoryMap.region[CCB_MEM].virt_ptr;
- for (i = 0; i < PM8001_MAX_CCB; i++) {
- pm8001_ha->ccb_info[i].ccb_dma_handle =
- pm8001_ha->memoryMap.region[CCB_MEM].phys_addr +
- i * sizeof(struct pm8001_ccb_info);
- pm8001_ha->ccb_info[i].task = NULL;
- pm8001_ha->ccb_info[i].ccb_tag = 0xffffffff;
- pm8001_ha->ccb_info[i].device = NULL;
- ++pm8001_ha->tags_num;
- }
pm8001_ha->flags = PM8001F_INIT_TIME;
/* Initialize tags */
pm8001_tag_init(pm8001_ha);
return 0;
+
+err_out_shost:
+ scsi_remove_host(pm8001_ha->shost);
+err_out_nodev:
+ for (i = 0; i < pm8001_ha->max_memcnt; i++) {
+ if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
+ pci_free_consistent(pm8001_ha->pdev,
+ (pm8001_ha->memoryMap.region[i].total_len +
+ pm8001_ha->memoryMap.region[i].alignment),
+ pm8001_ha->memoryMap.region[i].virt_ptr,
+ pm8001_ha->memoryMap.region[i].phys_addr);
+ }
+ }
err_out:
return 1;
}
@@ -899,7 +925,8 @@ static int pm8001_configure_phy_settings(struct pm8001_hba_info *pm8001_ha)
static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha)
{
u32 number_of_intr;
- int rc;
+ int rc, cpu_online_count;
+ unsigned int allocated_irq_vectors;
/* SPCv controllers supports 64 msi-x */
if (pm8001_ha->chip_id == chip_8001) {
@@ -908,13 +935,21 @@ static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha)
number_of_intr = PM8001_MAX_MSIX_VEC;
}
+ cpu_online_count = num_online_cpus();
+ number_of_intr = min_t(int, cpu_online_count, number_of_intr);
rc = pci_alloc_irq_vectors(pm8001_ha->pdev, number_of_intr,
number_of_intr, PCI_IRQ_MSIX);
- number_of_intr = rc;
+ allocated_irq_vectors = rc;
if (rc < 0)
return rc;
+
+ /* Assigns the number of interrupts */
+ number_of_intr = min_t(int, allocated_irq_vectors, number_of_intr);
pm8001_ha->number_of_intr = number_of_intr;
+ /* Maximum queue number updating in HBA structure */
+ pm8001_ha->max_q_num = number_of_intr;
+
PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
"pci_alloc_irq_vectors request ret:%d no of intr %d\n",
rc, pm8001_ha->number_of_intr));
@@ -1069,13 +1104,6 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
rc = -ENOMEM;
goto err_out_free;
}
- /* Setup Interrupt */
- rc = pm8001_setup_irq(pm8001_ha);
- if (rc) {
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
- "pm8001_setup_irq failed [ret: %d]\n", rc));
- goto err_out_shost;
- }
PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
@@ -1085,16 +1113,13 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
goto err_out_ha_free;
}
+ rc = pm8001_init_ccb_tag(pm8001_ha, shost, pdev);
+ if (rc)
+ goto err_out_enable;
+
rc = scsi_add_host(shost, &pdev->dev);
if (rc)
goto err_out_ha_free;
- /* Request Interrupt */
- rc = pm8001_request_irq(pm8001_ha);
- if (rc) {
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
- "pm8001_request_irq failed [ret: %d]\n", rc));
- goto err_out_shost;
- }
PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
if (pm8001_ha->chip_id != chip_8001) {
@@ -1137,6 +1162,60 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
return rc;
}
+/*
+ * pm8001_init_ccb_tag - allocate memory to CCB and tag.
+ * @pm8001_ha: our hba card information.
+ * @shost: scsi host which has been allocated outside.
+ */
+static int
+pm8001_init_ccb_tag(struct pm8001_hba_info *pm8001_ha, struct Scsi_Host *shost,
+ struct pci_dev *pdev)
+{
+ int i = 0;
+ u32 max_out_io, ccb_count;
+ u32 can_queue;
+
+ max_out_io = pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_out_io;
+ ccb_count = min_t(int, PM8001_MAX_CCB, max_out_io);
+
+ /* Update to the scsi host*/
+ can_queue = ccb_count - PM8001_RESERVE_SLOT;
+ shost->can_queue = can_queue;
+
+ pm8001_ha->tags = kzalloc(ccb_count, GFP_KERNEL);
+ if (!pm8001_ha->tags)
+ goto err_out;
+
+ /* Memory region for ccb_info*/
+ pm8001_ha->ccb_info = (struct pm8001_ccb_info *)
+ kcalloc(ccb_count, sizeof(struct pm8001_ccb_info), GFP_KERNEL);
+ if (!pm8001_ha->ccb_info) {
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk
+ ("Unable to allocate memory for ccb\n"));
+ goto err_out_noccb;
+ }
+ for (i = 0; i < ccb_count; i++) {
+ pm8001_ha->ccb_info[i].buf_prd = pci_alloc_consistent(pdev,
+ sizeof(struct pm8001_prd) * PM8001_MAX_DMA_SG,
+ &pm8001_ha->ccb_info[i].ccb_dma_handle);
+ if (!pm8001_ha->ccb_info[i].buf_prd) {
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk
+ ("pm80xx: ccb prd memory allocation error\n"));
+ goto err_out;
+ }
+ pm8001_ha->ccb_info[i].task = NULL;
+ pm8001_ha->ccb_info[i].ccb_tag = 0xffffffff;
+ pm8001_ha->ccb_info[i].device = NULL;
+ ++pm8001_ha->tags_num;
+ }
+ return 0;
+
+err_out_noccb:
+ kfree(pm8001_ha->devices);
+err_out:
+ return -ENOMEM;
+}
+
static void pm8001_pci_remove(struct pci_dev *pdev)
{
struct sas_ha_struct *sha = pci_get_drvdata(pdev);
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index ae7ba9b..95663e1 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -58,7 +58,7 @@
#include "pm8001_defs.h"
#define DRV_NAME "pm80xx"
-#define DRV_VERSION "0.1.39"
+#define DRV_VERSION "0.1.40"
#define PM8001_FAIL_LOGGING 0x01 /* Error message logging */
#define PM8001_INIT_LOGGING 0x02 /* driver init logging */
#define PM8001_DISC_LOGGING 0x04 /* discovery layer logging */
@@ -315,7 +315,7 @@ struct pm8001_ccb_info {
u32 ccb_tag;
dma_addr_t ccb_dma_handle;
struct pm8001_device *device;
- struct pm8001_prd buf_prd[PM8001_MAX_DMA_SG];
+ struct pm8001_prd *buf_prd;
struct fw_control_ex *fw_control_context;
u8 open_retry;
};
@@ -468,6 +468,7 @@ struct inbound_queue_table {
u32 reserved;
__le32 consumer_index;
u32 producer_idx;
+ spinlock_t iq_lock;
};
struct outbound_queue_table {
u32 element_size_cnt;
@@ -524,8 +525,8 @@ struct pm8001_hba_info {
void __iomem *fatal_tbl_addr; /*MPI IVT Table Addr */
union main_cfg_table main_cfg_tbl;
union general_status_table gs_tbl;
- struct inbound_queue_table inbnd_q_tbl[PM8001_MAX_SPCV_INB_NUM];
- struct outbound_queue_table outbnd_q_tbl[PM8001_MAX_SPCV_OUTB_NUM];
+ struct inbound_queue_table inbnd_q_tbl[PM8001_MAX_INB_NUM];
+ struct outbound_queue_table outbnd_q_tbl[PM8001_MAX_OUTB_NUM];
struct sas_phy_attribute_table phy_attr_table;
/* MPI SAS PHY attributes */
u8 sas_addr[SAS_ADDR_SIZE];
@@ -561,6 +562,12 @@ struct pm8001_hba_info {
u32 reset_in_progress;
u32 non_fatal_count;
u32 non_fatal_read_length;
+ u32 max_q_num;
+ u32 ib_offset;
+ u32 ob_offset;
+ u32 ci_offset;
+ u32 pi_offset;
+ u32 max_memcnt;
};
struct pm8001_work {
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index b42f41d..7593f24 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -720,7 +720,7 @@ static void read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
{
int i;
void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
- for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) {
+ for (i = 0; i < PM8001_MAX_INB_NUM; i++) {
u32 offset = i * 0x20;
pm8001_ha->inbnd_q_tbl[i].pi_pci_bar =
get_pci_bar_index(pm8001_mr32(address,
@@ -738,7 +738,7 @@ static void read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
{
int i;
void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
- for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) {
+ for (i = 0; i < PM8001_MAX_OUTB_NUM; i++) {
u32 offset = i * 0x24;
pm8001_ha->outbnd_q_tbl[i].ci_pci_bar =
get_pci_bar_index(pm8001_mr32(address,
@@ -758,6 +758,10 @@ static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
u32 offsetib, offsetob;
void __iomem *addressib = pm8001_ha->inbnd_q_tbl_addr;
void __iomem *addressob = pm8001_ha->outbnd_q_tbl_addr;
+ u32 ib_offset = pm8001_ha->ib_offset;
+ u32 ob_offset = pm8001_ha->ob_offset;
+ u32 ci_offset = pm8001_ha->ci_offset;
+ u32 pi_offset = pm8001_ha->pi_offset;
pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_event_log_addr =
pm8001_ha->memoryMap.region[AAP1].phys_addr_hi;
@@ -778,23 +782,23 @@ static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
/* Disable end to end CRC checking */
pm8001_ha->main_cfg_tbl.pm80xx_tbl.crc_core_dump = (0x1 << 16);
- for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) {
+ for (i = 0; i < pm8001_ha->max_q_num; i++) {
pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt =
PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x00<<30);
pm8001_ha->inbnd_q_tbl[i].upper_base_addr =
- pm8001_ha->memoryMap.region[IB + i].phys_addr_hi;
+ pm8001_ha->memoryMap.region[ib_offset + i].phys_addr_hi;
pm8001_ha->inbnd_q_tbl[i].lower_base_addr =
- pm8001_ha->memoryMap.region[IB + i].phys_addr_lo;
+ pm8001_ha->memoryMap.region[ib_offset + i].phys_addr_lo;
pm8001_ha->inbnd_q_tbl[i].base_virt =
- (u8 *)pm8001_ha->memoryMap.region[IB + i].virt_ptr;
+ (u8 *)pm8001_ha->memoryMap.region[ib_offset + i].virt_ptr;
pm8001_ha->inbnd_q_tbl[i].total_length =
- pm8001_ha->memoryMap.region[IB + i].total_len;
+ pm8001_ha->memoryMap.region[ib_offset + i].total_len;
pm8001_ha->inbnd_q_tbl[i].ci_upper_base_addr =
- pm8001_ha->memoryMap.region[CI + i].phys_addr_hi;
+ pm8001_ha->memoryMap.region[ci_offset + i].phys_addr_hi;
pm8001_ha->inbnd_q_tbl[i].ci_lower_base_addr =
- pm8001_ha->memoryMap.region[CI + i].phys_addr_lo;
+ pm8001_ha->memoryMap.region[ci_offset + i].phys_addr_lo;
pm8001_ha->inbnd_q_tbl[i].ci_virt =
- pm8001_ha->memoryMap.region[CI + i].virt_ptr;
+ pm8001_ha->memoryMap.region[ci_offset + i].virt_ptr;
offsetib = i * 0x20;
pm8001_ha->inbnd_q_tbl[i].pi_pci_bar =
get_pci_bar_index(pm8001_mr32(addressib,
@@ -809,25 +813,25 @@ static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
pm8001_ha->inbnd_q_tbl[i].pi_pci_bar,
pm8001_ha->inbnd_q_tbl[i].pi_offset));
}
- for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) {
+ for (i = 0; i < pm8001_ha->max_q_num; i++) {
pm8001_ha->outbnd_q_tbl[i].element_size_cnt =
PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x01<<30);
pm8001_ha->outbnd_q_tbl[i].upper_base_addr =
- pm8001_ha->memoryMap.region[OB + i].phys_addr_hi;
+ pm8001_ha->memoryMap.region[ob_offset + i].phys_addr_hi;
pm8001_ha->outbnd_q_tbl[i].lower_base_addr =
- pm8001_ha->memoryMap.region[OB + i].phys_addr_lo;
+ pm8001_ha->memoryMap.region[ob_offset + i].phys_addr_lo;
pm8001_ha->outbnd_q_tbl[i].base_virt =
- (u8 *)pm8001_ha->memoryMap.region[OB + i].virt_ptr;
+ (u8 *)pm8001_ha->memoryMap.region[ob_offset + i].virt_ptr;
pm8001_ha->outbnd_q_tbl[i].total_length =
- pm8001_ha->memoryMap.region[OB + i].total_len;
+ pm8001_ha->memoryMap.region[ob_offset + i].total_len;
pm8001_ha->outbnd_q_tbl[i].pi_upper_base_addr =
- pm8001_ha->memoryMap.region[PI + i].phys_addr_hi;
+ pm8001_ha->memoryMap.region[pi_offset + i].phys_addr_hi;
pm8001_ha->outbnd_q_tbl[i].pi_lower_base_addr =
- pm8001_ha->memoryMap.region[PI + i].phys_addr_lo;
+ pm8001_ha->memoryMap.region[pi_offset + i].phys_addr_lo;
/* interrupt vector based on oq */
pm8001_ha->outbnd_q_tbl[i].interrup_vec_cnt_delay = (i << 24);
pm8001_ha->outbnd_q_tbl[i].pi_virt =
- pm8001_ha->memoryMap.region[PI + i].virt_ptr;
+ pm8001_ha->memoryMap.region[pi_offset + i].virt_ptr;
offsetob = i * 0x24;
pm8001_ha->outbnd_q_tbl[i].ci_pci_bar =
get_pci_bar_index(pm8001_mr32(addressob,
@@ -871,7 +875,7 @@ static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity);
/* Update Fatal error interrupt vector */
pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt |=
- ((pm8001_ha->number_of_intr - 1) << 8);
+ ((pm8001_ha->max_q_num - 1) << 8);
pm8001_mw32(address, MAIN_FATAL_ERROR_INTERRUPT,
pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt);
PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
@@ -1010,8 +1014,12 @@ static int mpi_init_check(struct pm8001_hba_info *pm8001_ha)
value &= SPCv_MSGU_CFG_TABLE_UPDATE;
} while ((value != 0) && (--max_wait_count));
- if (!max_wait_count)
- return -1;
+ if (!max_wait_count) {
+ /* additional check */
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+ "Inb doorbell clear not toggled[value:%x]\n", value));
+ return -EBUSY;
+ }
/* check the MPI-State for initialization upto 100ms*/
max_wait_count = 100 * 1000;/* 100 msec */
do {
@@ -1022,12 +1030,12 @@ static int mpi_init_check(struct pm8001_hba_info *pm8001_ha)
} while ((GST_MPI_STATE_INIT !=
(gst_len_mpistate & GST_MPI_STATE_MASK)) && (--max_wait_count));
if (!max_wait_count)
- return -1;
+ return -EBUSY;
/* check MPI Initialization error */
gst_len_mpistate = gst_len_mpistate >> 16;
if (0x0000 != gst_len_mpistate)
- return -1;
+ return -EBUSY;
return 0;
}
@@ -1469,11 +1477,10 @@ static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha)
/* update main config table ,inbound table and outbound table */
update_main_config_table(pm8001_ha);
- for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++)
+ for (i = 0; i < pm8001_ha->max_q_num; i++) {
update_inbnd_queue_table(pm8001_ha, i);
- for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++)
update_outbnd_queue_table(pm8001_ha, i);
-
+ }
/* notify firmware update finished and check initialization status */
if (0 == mpi_init_check(pm8001_ha)) {
PM8001_INIT_DBG(pm8001_ha,
@@ -4191,7 +4198,7 @@ static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
unsigned long flags;
u32 regval;
- if (vec == (pm8001_ha->number_of_intr - 1)) {
+ if (vec == (pm8001_ha->max_q_num - 1)) {
regval = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
if ((regval & SCRATCH_PAD_MIPSALL_READY) !=
SCRATCH_PAD_MIPSALL_READY) {
@@ -4274,6 +4281,7 @@ static int pm80xx_chip_smp_req(struct pm8001_hba_info *pm8001_ha,
char *preq_dma_addr = NULL;
__le64 tmp_addr;
u32 i, length;
+ unsigned long flags;
memset(&smp_cmd, 0, sizeof(smp_cmd));
/*
@@ -4369,8 +4377,10 @@ static int pm80xx_chip_smp_req(struct pm8001_hba_info *pm8001_ha,
build_smp_cmd(pm8001_dev->device_id, smp_cmd.tag,
&smp_cmd, pm8001_ha->smp_exp_mode, length);
+ spin_lock_irqsave(&circularQ->iq_lock, flags);
rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &smp_cmd,
sizeof(smp_cmd), 0);
+ spin_unlock_irqrestore(&circularQ->iq_lock, flags);
if (rc)
goto err_out_2;
return 0;
@@ -4434,7 +4444,8 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
u64 phys_addr, start_addr, end_addr;
u32 end_addr_high, end_addr_low;
struct inbound_queue_table *circularQ;
- u32 q_index;
+ unsigned long flags;
+ u32 q_index, cpu_id;
u32 opc = OPC_INB_SSPINIIOSTART;
memset(&ssp_cmd, 0, sizeof(ssp_cmd));
memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8);
@@ -4453,7 +4464,8 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_attr & 7);
memcpy(ssp_cmd.ssp_iu.cdb, task->ssp_task.cmd->cmnd,
task->ssp_task.cmd->cmd_len);
- q_index = (u32) (pm8001_dev->id & 0x00ffffff) % PM8001_MAX_INB_NUM;
+ cpu_id = smp_processor_id();
+ q_index = (u32) (cpu_id) % (pm8001_ha->max_q_num);
circularQ = &pm8001_ha->inbnd_q_tbl[q_index];
/* Check if encryption is set */
@@ -4471,8 +4483,7 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
if (task->num_scatter > 1) {
pm8001_chip_make_sg(task->scatter,
ccb->n_elem, ccb->buf_prd);
- phys_addr = ccb->ccb_dma_handle +
- offsetof(struct pm8001_ccb_info, buf_prd[0]);
+ phys_addr = ccb->ccb_dma_handle;
ssp_cmd.enc_addr_low =
cpu_to_le32(lower_32_bits(phys_addr));
ssp_cmd.enc_addr_high =
@@ -4501,9 +4512,7 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
end_addr_high, end_addr_low));
pm8001_chip_make_sg(task->scatter, 1,
ccb->buf_prd);
- phys_addr = ccb->ccb_dma_handle +
- offsetof(struct pm8001_ccb_info,
- buf_prd[0]);
+ phys_addr = ccb->ccb_dma_handle;
ssp_cmd.enc_addr_low =
cpu_to_le32(lower_32_bits(phys_addr));
ssp_cmd.enc_addr_high =
@@ -4531,8 +4540,7 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
if (task->num_scatter > 1) {
pm8001_chip_make_sg(task->scatter, ccb->n_elem,
ccb->buf_prd);
- phys_addr = ccb->ccb_dma_handle +
- offsetof(struct pm8001_ccb_info, buf_prd[0]);
+ phys_addr = ccb->ccb_dma_handle;
ssp_cmd.addr_low =
cpu_to_le32(lower_32_bits(phys_addr));
ssp_cmd.addr_high =
@@ -4560,9 +4568,7 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
end_addr_high, end_addr_low));
pm8001_chip_make_sg(task->scatter, 1,
ccb->buf_prd);
- phys_addr = ccb->ccb_dma_handle +
- offsetof(struct pm8001_ccb_info,
- buf_prd[0]);
+ phys_addr = ccb->ccb_dma_handle;
ssp_cmd.addr_low =
cpu_to_le32(lower_32_bits(phys_addr));
ssp_cmd.addr_high =
@@ -4576,9 +4582,10 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
ssp_cmd.esgl = 0;
}
}
- q_index = (u32) (pm8001_dev->id & 0x00ffffff) % PM8001_MAX_OUTB_NUM;
+ spin_lock_irqsave(&circularQ->iq_lock, flags);
ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc,
&ssp_cmd, sizeof(ssp_cmd), q_index);
+ spin_unlock_irqrestore(&circularQ->iq_lock, flags);
return ret;
}
@@ -4590,7 +4597,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
struct pm8001_device *pm8001_ha_dev = dev->lldd_dev;
u32 tag = ccb->ccb_tag;
int ret;
- u32 q_index;
+ u32 q_index, cpu_id;
struct sata_start_req sata_cmd;
u32 hdr_tag, ncg_tag = 0;
u64 phys_addr, start_addr, end_addr;
@@ -4601,7 +4608,8 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
unsigned long flags;
u32 opc = OPC_INB_SATA_HOST_OPSTART;
memset(&sata_cmd, 0, sizeof(sata_cmd));
- q_index = (u32) (pm8001_ha_dev->id & 0x00ffffff) % PM8001_MAX_INB_NUM;
+ cpu_id = smp_processor_id();
+ q_index = (u32) (cpu_id) % (pm8001_ha->max_q_num);
circularQ = &pm8001_ha->inbnd_q_tbl[q_index];
if (task->data_dir == DMA_NONE) {
@@ -4652,8 +4660,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
if (task->num_scatter > 1) {
pm8001_chip_make_sg(task->scatter,
ccb->n_elem, ccb->buf_prd);
- phys_addr = ccb->ccb_dma_handle +
- offsetof(struct pm8001_ccb_info, buf_prd[0]);
+ phys_addr = ccb->ccb_dma_handle;
sata_cmd.enc_addr_low = lower_32_bits(phys_addr);
sata_cmd.enc_addr_high = upper_32_bits(phys_addr);
sata_cmd.enc_esgl = cpu_to_le32(1 << 31);
@@ -4678,9 +4685,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
end_addr_high, end_addr_low));
pm8001_chip_make_sg(task->scatter, 1,
ccb->buf_prd);
- phys_addr = ccb->ccb_dma_handle +
- offsetof(struct pm8001_ccb_info,
- buf_prd[0]);
+ phys_addr = ccb->ccb_dma_handle;
sata_cmd.enc_addr_low =
lower_32_bits(phys_addr);
sata_cmd.enc_addr_high =
@@ -4718,8 +4723,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
if (task->num_scatter > 1) {
pm8001_chip_make_sg(task->scatter,
ccb->n_elem, ccb->buf_prd);
- phys_addr = ccb->ccb_dma_handle +
- offsetof(struct pm8001_ccb_info, buf_prd[0]);
+ phys_addr = ccb->ccb_dma_handle;
sata_cmd.addr_low = lower_32_bits(phys_addr);
sata_cmd.addr_high = upper_32_bits(phys_addr);
sata_cmd.esgl = cpu_to_le32(1 << 31);
@@ -4744,9 +4748,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
end_addr_high, end_addr_low));
pm8001_chip_make_sg(task->scatter, 1,
ccb->buf_prd);
- phys_addr = ccb->ccb_dma_handle +
- offsetof(struct pm8001_ccb_info,
- buf_prd[0]);
+ phys_addr = ccb->ccb_dma_handle;
sata_cmd.addr_low =
lower_32_bits(phys_addr);
sata_cmd.addr_high =
@@ -4817,9 +4819,10 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
}
}
}
- q_index = (u32) (pm8001_ha_dev->id & 0x00ffffff) % PM8001_MAX_OUTB_NUM;
+ spin_lock_irqsave(&circularQ->iq_lock, flags);
ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc,
&sata_cmd, sizeof(sata_cmd), q_index);
+ spin_unlock_irqrestore(&circularQ->iq_lock, flags);
return ret;
}
diff --git a/drivers/scsi/qla2xxx/qla_dfs.c b/drivers/scsi/qla2xxx/qla_dfs.c
index f89ad32..d5ebcf7 100644
--- a/drivers/scsi/qla2xxx/qla_dfs.c
+++ b/drivers/scsi/qla2xxx/qla_dfs.c
@@ -170,20 +170,7 @@ qla2x00_dfs_tgt_sess_show(struct seq_file *s, void *unused)
return 0;
}
-static int
-qla2x00_dfs_tgt_sess_open(struct inode *inode, struct file *file)
-{
- scsi_qla_host_t *vha = inode->i_private;
-
- return single_open(file, qla2x00_dfs_tgt_sess_show, vha);
-}
-
-static const struct file_operations dfs_tgt_sess_ops = {
- .open = qla2x00_dfs_tgt_sess_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(qla2x00_dfs_tgt_sess);
static int
qla2x00_dfs_tgt_port_database_show(struct seq_file *s, void *unused)
@@ -239,20 +226,7 @@ qla2x00_dfs_tgt_port_database_show(struct seq_file *s, void *unused)
return 0;
}
-static int
-qla2x00_dfs_tgt_port_database_open(struct inode *inode, struct file *file)
-{
- scsi_qla_host_t *vha = inode->i_private;
-
- return single_open(file, qla2x00_dfs_tgt_port_database_show, vha);
-}
-
-static const struct file_operations dfs_tgt_port_database_ops = {
- .open = qla2x00_dfs_tgt_port_database_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(qla2x00_dfs_tgt_port_database);
static int
qla_dfs_fw_resource_cnt_show(struct seq_file *s, void *unused)
@@ -301,20 +275,7 @@ qla_dfs_fw_resource_cnt_show(struct seq_file *s, void *unused)
return 0;
}
-static int
-qla_dfs_fw_resource_cnt_open(struct inode *inode, struct file *file)
-{
- struct scsi_qla_host *vha = inode->i_private;
-
- return single_open(file, qla_dfs_fw_resource_cnt_show, vha);
-}
-
-static const struct file_operations dfs_fw_resource_cnt_ops = {
- .open = qla_dfs_fw_resource_cnt_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(qla_dfs_fw_resource_cnt);
static int
qla_dfs_tgt_counters_show(struct seq_file *s, void *unused)
@@ -391,20 +352,7 @@ qla_dfs_tgt_counters_show(struct seq_file *s, void *unused)
return 0;
}
-static int
-qla_dfs_tgt_counters_open(struct inode *inode, struct file *file)
-{
- struct scsi_qla_host *vha = inode->i_private;
-
- return single_open(file, qla_dfs_tgt_counters_show, vha);
-}
-
-static const struct file_operations dfs_tgt_counters_ops = {
- .open = qla_dfs_tgt_counters_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(qla_dfs_tgt_counters);
static int
qla2x00_dfs_fce_show(struct seq_file *s, void *unused)
@@ -606,19 +554,19 @@ qla2x00_dfs_setup(scsi_qla_host_t *vha)
create_nodes:
ha->dfs_fw_resource_cnt = debugfs_create_file("fw_resource_count",
- S_IRUSR, ha->dfs_dir, vha, &dfs_fw_resource_cnt_ops);
+ S_IRUSR, ha->dfs_dir, vha, &qla_dfs_fw_resource_cnt_fops);
ha->dfs_tgt_counters = debugfs_create_file("tgt_counters", S_IRUSR,
- ha->dfs_dir, vha, &dfs_tgt_counters_ops);
+ ha->dfs_dir, vha, &qla_dfs_tgt_counters_fops);
ha->tgt.dfs_tgt_port_database = debugfs_create_file("tgt_port_database",
- S_IRUSR, ha->dfs_dir, vha, &dfs_tgt_port_database_ops);
+ S_IRUSR, ha->dfs_dir, vha, &qla2x00_dfs_tgt_port_database_fops);
ha->dfs_fce = debugfs_create_file("fce", S_IRUSR, ha->dfs_dir, vha,
&dfs_fce_ops);
ha->tgt.dfs_tgt_sess = debugfs_create_file("tgt_sess",
- S_IRUSR, ha->dfs_dir, vha, &dfs_tgt_sess_ops);
+ S_IRUSR, ha->dfs_dir, vha, &qla2x00_dfs_tgt_sess_fops);
if (IS_QLA27XX(ha) || IS_QLA83XX(ha) || IS_QLA28XX(ha)) {
ha->tgt.dfs_naqp = debugfs_create_file("naqp",
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index a39b1a8..a24b82d 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1838,6 +1838,7 @@ qla24xx_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
struct mbx_24xx_entry *pkt)
{
const char func[] = "MBX-IOCB2";
+ struct qla_hw_data *ha = vha->hw;
srb_t *sp;
struct srb_iocb *si;
u16 sz, i;
@@ -1847,6 +1848,18 @@ qla24xx_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
if (!sp)
return;
+ if (sp->type == SRB_SCSI_CMD ||
+ sp->type == SRB_NVME_CMD ||
+ sp->type == SRB_TM_CMD) {
+ ql_log(ql_log_warn, vha, 0x509d,
+ "Inconsistent event entry type %d\n", sp->type);
+ if (IS_P3P_TYPE(ha))
+ set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
+ else
+ set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+ return;
+ }
+
si = &sp->u.iocb_cmd;
sz = min(ARRAY_SIZE(pkt->mb), ARRAY_SIZE(sp->u.iocb_cmd.u.mbx.in_mb));
@@ -3399,32 +3412,6 @@ void qla24xx_nvme_ls4_iocb(struct scsi_qla_host *vha,
sp->done(sp, comp_status);
}
-static void qla24xx_process_mbx_iocb_response(struct scsi_qla_host *vha,
- struct rsp_que *rsp, struct sts_entry_24xx *pkt)
-{
- struct qla_hw_data *ha = vha->hw;
- srb_t *sp;
- static const char func[] = "MBX-IOCB2";
-
- sp = qla2x00_get_sp_from_handle(vha, func, rsp->req, pkt);
- if (!sp)
- return;
-
- if (sp->type == SRB_SCSI_CMD ||
- sp->type == SRB_NVME_CMD ||
- sp->type == SRB_TM_CMD) {
- ql_log(ql_log_warn, vha, 0x509d,
- "Inconsistent event entry type %d\n", sp->type);
- if (IS_P3P_TYPE(ha))
- set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
- else
- set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
- return;
- }
-
- qla24xx_mbx_iocb_entry(vha, rsp->req, (struct mbx_24xx_entry *)pkt);
-}
-
/**
* qla24xx_process_response_queue() - Process response queue entries.
* @vha: SCSI driver HA context
@@ -3534,7 +3521,8 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha,
(struct abort_entry_24xx *)pkt);
break;
case MBX_IOCB_TYPE:
- qla24xx_process_mbx_iocb_response(vha, rsp, pkt);
+ qla24xx_mbx_iocb_entry(vha, rsp->req,
+ (struct mbx_24xx_entry *)pkt);
break;
case VP_CTRL_IOCB_TYPE:
qla_ctrlvp_completed(vha, rsp->req,
diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c
index b4f22db..1f90051 100644
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -541,7 +541,7 @@ static int qla_nvme_post_cmd(struct nvme_fc_local_port *lport,
fc_port_t *fcport;
struct srb_iocb *nvme;
struct scsi_qla_host *vha;
- int rval = -ENODEV;
+ int rval;
srb_t *sp;
struct qla_qpair *qpair = hw_queue_handle;
struct nvme_private *priv = fd->private;
@@ -549,19 +549,19 @@ static int qla_nvme_post_cmd(struct nvme_fc_local_port *lport,
if (!priv) {
/* nvme association has been torn down */
- return rval;
+ return -ENODEV;
}
fcport = qla_rport->fcport;
if (!qpair || !fcport || (qpair && !qpair->fw_started) ||
(fcport && fcport->deleted))
- return rval;
+ return -ENODEV;
vha = fcport->vha;
if (!(fcport->nvme_flag & NVME_FLAG_REGISTERED))
- return rval;
+ return -ENODEV;
if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
(qpair && !qpair->fw_started) || fcport->deleted)
diff --git a/drivers/scsi/qla2xxx/qla_nx2.c b/drivers/scsi/qla2xxx/qla_nx2.c
index 3a415b1..01ccd45 100644
--- a/drivers/scsi/qla2xxx/qla_nx2.c
+++ b/drivers/scsi/qla2xxx/qla_nx2.c
@@ -659,7 +659,7 @@ static int
qla8044_poll_reg(struct scsi_qla_host *vha, uint32_t addr,
int duration, uint32_t test_mask, uint32_t test_result)
{
- uint32_t value;
+ uint32_t value = 0;
int timeout_error;
uint8_t retries;
int ret_val = QLA_SUCCESS;
diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c
index fd3aabb..f1767b2 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.c
+++ b/drivers/scsi/qla4xxx/ql4_nx.c
@@ -3225,7 +3225,7 @@ static void qla4_8xxx_uevent_emit(struct scsi_qla_host *ha, u32 code)
switch (code) {
case QL4_UEVENT_CODE_FW_DUMP:
- snprintf(event_string, sizeof(event_string), "FW_DUMP=%ld",
+ snprintf(event_string, sizeof(event_string), "FW_DUMP=%lu",
ha->host_no);
break;
default:
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 97ff31e..60c7a7d 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -293,21 +293,6 @@ int __scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
}
EXPORT_SYMBOL(__scsi_execute);
-/**
- * scsi_init_cmd_errh - Initialize cmd fields related to error handling.
- * @cmd: command that is ready to be queued.
- *
- * This function has the job of initializing a number of fields related to error
- * handling. Typically this will be called once for each command, as required.
- */
-static void scsi_init_cmd_errh(struct scsi_cmnd *cmd)
-{
- scsi_set_resid(cmd, 0);
- memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
- if (cmd->cmd_len == 0)
- cmd->cmd_len = scsi_command_size(cmd->cmnd);
-}
-
/*
* Wake up the error handler if necessary. Avoid as follows that the error
* handler is not woken up if host in-flight requests number ==
@@ -530,7 +515,7 @@ static void scsi_uninit_cmd(struct scsi_cmnd *cmd)
}
}
-static void scsi_free_sgtables(struct scsi_cmnd *cmd)
+void scsi_free_sgtables(struct scsi_cmnd *cmd)
{
if (cmd->sdb.table.nents)
sg_free_table_chained(&cmd->sdb.table,
@@ -539,6 +524,7 @@ static void scsi_free_sgtables(struct scsi_cmnd *cmd)
sg_free_table_chained(&cmd->prot_sdb->table,
SCSI_INLINE_PROT_SG_CNT);
}
+EXPORT_SYMBOL_GPL(scsi_free_sgtables);
static void scsi_mq_uninit_cmd(struct scsi_cmnd *cmd)
{
@@ -791,6 +777,15 @@ static void scsi_io_completion_action(struct scsi_cmnd *cmd, int result)
/* See SSC3rXX or current. */
action = ACTION_FAIL;
break;
+ case DATA_PROTECT:
+ action = ACTION_FAIL;
+ if ((sshdr.asc == 0x0C && sshdr.ascq == 0x12) ||
+ (sshdr.asc == 0x55 &&
+ (sshdr.ascq == 0x0E || sshdr.ascq == 0x0F))) {
+ /* Insufficient zone resources */
+ blk_stat = BLK_STS_ZONE_OPEN_RESOURCE;
+ }
+ break;
default:
action = ACTION_FAIL;
break;
@@ -998,7 +993,7 @@ static inline bool scsi_cmd_needs_dma_drain(struct scsi_device *sdev,
}
/**
- * scsi_init_io - SCSI I/O initialization function.
+ * scsi_alloc_sgtables - allocate S/G tables for a command
* @cmd: command descriptor we wish to initialize
*
* Returns:
@@ -1006,7 +1001,7 @@ static inline bool scsi_cmd_needs_dma_drain(struct scsi_device *sdev,
* * BLK_STS_RESOURCE - if the failure is retryable
* * BLK_STS_IOERR - if the failure is fatal
*/
-blk_status_t scsi_init_io(struct scsi_cmnd *cmd)
+blk_status_t scsi_alloc_sgtables(struct scsi_cmnd *cmd)
{
struct scsi_device *sdev = cmd->device;
struct request *rq = cmd->request;
@@ -1098,7 +1093,7 @@ blk_status_t scsi_init_io(struct scsi_cmnd *cmd)
scsi_free_sgtables(cmd);
return ret;
}
-EXPORT_SYMBOL(scsi_init_io);
+EXPORT_SYMBOL(scsi_alloc_sgtables);
/**
* scsi_initialize_rq - initialize struct scsi_cmnd partially
@@ -1186,7 +1181,7 @@ static blk_status_t scsi_setup_scsi_cmnd(struct scsi_device *sdev,
* submit a request without an attached bio.
*/
if (req->bio) {
- blk_status_t ret = scsi_init_io(cmd);
+ blk_status_t ret = scsi_alloc_sgtables(cmd);
if (unlikely(ret != BLK_STS_OK))
return ret;
} else {
@@ -1196,58 +1191,16 @@ static blk_status_t scsi_setup_scsi_cmnd(struct scsi_device *sdev,
}
cmd->cmd_len = scsi_req(req)->cmd_len;
+ if (cmd->cmd_len == 0)
+ cmd->cmd_len = scsi_command_size(cmd->cmnd);
cmd->cmnd = scsi_req(req)->cmd;
cmd->transfersize = blk_rq_bytes(req);
cmd->allowed = scsi_req(req)->retries;
return BLK_STS_OK;
}
-/*
- * Setup a normal block command. These are simple request from filesystems
- * that still need to be translated to SCSI CDBs from the ULD.
- */
-static blk_status_t scsi_setup_fs_cmnd(struct scsi_device *sdev,
- struct request *req)
-{
- struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
-
- if (unlikely(sdev->handler && sdev->handler->prep_fn)) {
- blk_status_t ret = sdev->handler->prep_fn(sdev, req);
- if (ret != BLK_STS_OK)
- return ret;
- }
-
- cmd->cmnd = scsi_req(req)->cmd = scsi_req(req)->__cmd;
- memset(cmd->cmnd, 0, BLK_MAX_CDB);
- return scsi_cmd_to_driver(cmd)->init_command(cmd);
-}
-
-static blk_status_t scsi_setup_cmnd(struct scsi_device *sdev,
- struct request *req)
-{
- struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
- blk_status_t ret;
-
- if (!blk_rq_bytes(req))
- cmd->sc_data_direction = DMA_NONE;
- else if (rq_data_dir(req) == WRITE)
- cmd->sc_data_direction = DMA_TO_DEVICE;
- else
- cmd->sc_data_direction = DMA_FROM_DEVICE;
-
- if (blk_rq_is_scsi(req))
- ret = scsi_setup_scsi_cmnd(sdev, req);
- else
- ret = scsi_setup_fs_cmnd(sdev, req);
-
- if (ret != BLK_STS_OK)
- scsi_free_sgtables(cmd);
-
- return ret;
-}
-
static blk_status_t
-scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
+scsi_device_state_check(struct scsi_device *sdev, struct request *req)
{
switch (sdev->sdev_state) {
case SDEV_OFFLINE:
@@ -1589,7 +1542,7 @@ static unsigned int scsi_mq_inline_sgl_size(struct Scsi_Host *shost)
sizeof(struct scatterlist);
}
-static blk_status_t scsi_mq_prep_fn(struct request *req)
+static blk_status_t scsi_prepare_cmd(struct request *req)
{
struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
struct scsi_device *sdev = req->q->queuedata;
@@ -1601,6 +1554,10 @@ static blk_status_t scsi_mq_prep_fn(struct request *req)
cmd->request = req;
cmd->tag = req->tag;
cmd->prot_op = SCSI_PROT_NORMAL;
+ if (blk_rq_bytes(req))
+ cmd->sc_data_direction = rq_dma_dir(req);
+ else
+ cmd->sc_data_direction = DMA_NONE;
sg = (void *)cmd + sizeof(struct scsi_cmnd) + shost->hostt->cmd_size;
cmd->sdb.table.sgl = sg;
@@ -1612,9 +1569,23 @@ static blk_status_t scsi_mq_prep_fn(struct request *req)
(struct scatterlist *)(cmd->prot_sdb + 1);
}
- blk_mq_start_request(req);
+ /*
+ * Special handling for passthrough commands, which don't go to the ULP
+ * at all:
+ */
+ if (blk_rq_is_scsi(req))
+ return scsi_setup_scsi_cmnd(sdev, req);
- return scsi_setup_cmnd(sdev, req);
+ if (sdev->handler && sdev->handler->prep_fn) {
+ blk_status_t ret = sdev->handler->prep_fn(sdev, req);
+
+ if (ret != BLK_STS_OK)
+ return ret;
+ }
+
+ cmd->cmnd = scsi_req(req)->cmd = scsi_req(req)->__cmd;
+ memset(cmd->cmnd, 0, BLK_MAX_CDB);
+ return scsi_cmd_to_driver(cmd)->init_command(cmd);
}
static void scsi_mq_done(struct scsi_cmnd *cmd)
@@ -1680,7 +1651,7 @@ static blk_status_t scsi_queue_rq(struct blk_mq_hw_ctx *hctx,
* commands.
*/
if (unlikely(sdev->sdev_state != SDEV_RUNNING)) {
- ret = scsi_prep_state_check(sdev, req);
+ ret = scsi_device_state_check(sdev, req);
if (ret != BLK_STS_OK)
goto out_put_budget;
}
@@ -1692,13 +1663,12 @@ static blk_status_t scsi_queue_rq(struct blk_mq_hw_ctx *hctx,
goto out_dec_target_busy;
if (!(req->rq_flags & RQF_DONTPREP)) {
- ret = scsi_mq_prep_fn(req);
+ ret = scsi_prepare_cmd(req);
if (ret != BLK_STS_OK)
goto out_dec_host_busy;
req->rq_flags |= RQF_DONTPREP;
} else {
clear_bit(SCMD_STATE_COMPLETE, &cmd->state);
- blk_mq_start_request(req);
}
cmd->flags &= SCMD_PRESERVED_FLAGS;
@@ -1707,9 +1677,11 @@ static blk_status_t scsi_queue_rq(struct blk_mq_hw_ctx *hctx,
if (bd->last)
cmd->flags |= SCMD_LAST;
- scsi_init_cmd_errh(cmd);
+ scsi_set_resid(cmd, 0);
+ memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
cmd->scsi_done = scsi_mq_done;
+ blk_mq_start_request(req);
reason = scsi_dispatch_cmd(cmd);
if (reason) {
scsi_set_blocked(cmd, reason);
@@ -1970,7 +1942,6 @@ struct scsi_device *scsi_device_from_queue(struct request_queue *q)
return sdev;
}
-EXPORT_SYMBOL_GPL(scsi_device_from_queue);
/**
* scsi_block_requests - Utility function used by low-level drivers to prevent
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 83c4d95..656bcf4 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -902,7 +902,7 @@ static blk_status_t sd_setup_unmap_cmnd(struct scsi_cmnd *cmd)
cmd->transfersize = data_len;
rq->timeout = SD_TIMEOUT;
- return scsi_init_io(cmd);
+ return scsi_alloc_sgtables(cmd);
}
static blk_status_t sd_setup_write_same16_cmnd(struct scsi_cmnd *cmd,
@@ -934,7 +934,7 @@ static blk_status_t sd_setup_write_same16_cmnd(struct scsi_cmnd *cmd,
cmd->transfersize = data_len;
rq->timeout = unmap ? SD_TIMEOUT : SD_WRITE_SAME_TIMEOUT;
- return scsi_init_io(cmd);
+ return scsi_alloc_sgtables(cmd);
}
static blk_status_t sd_setup_write_same10_cmnd(struct scsi_cmnd *cmd,
@@ -966,7 +966,7 @@ static blk_status_t sd_setup_write_same10_cmnd(struct scsi_cmnd *cmd,
cmd->transfersize = data_len;
rq->timeout = unmap ? SD_TIMEOUT : SD_WRITE_SAME_TIMEOUT;
- return scsi_init_io(cmd);
+ return scsi_alloc_sgtables(cmd);
}
static blk_status_t sd_setup_write_zeroes_cmnd(struct scsi_cmnd *cmd)
@@ -1107,7 +1107,7 @@ static blk_status_t sd_setup_write_same_cmnd(struct scsi_cmnd *cmd)
* knows how much to actually write.
*/
rq->__data_len = sdp->sector_size;
- ret = scsi_init_io(cmd);
+ ret = scsi_alloc_sgtables(cmd);
rq->__data_len = blk_rq_bytes(rq);
return ret;
@@ -1226,23 +1226,24 @@ static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
unsigned int dif;
bool dix;
- ret = scsi_init_io(cmd);
+ ret = scsi_alloc_sgtables(cmd);
if (ret != BLK_STS_OK)
return ret;
+ ret = BLK_STS_IOERR;
if (!scsi_device_online(sdp) || sdp->changed) {
scmd_printk(KERN_ERR, cmd, "device offline or changed\n");
- return BLK_STS_IOERR;
+ goto fail;
}
if (blk_rq_pos(rq) + blk_rq_sectors(rq) > get_capacity(rq->rq_disk)) {
scmd_printk(KERN_ERR, cmd, "access beyond end of device\n");
- return BLK_STS_IOERR;
+ goto fail;
}
if ((blk_rq_pos(rq) & mask) || (blk_rq_sectors(rq) & mask)) {
scmd_printk(KERN_ERR, cmd, "request not aligned to the logical block size\n");
- return BLK_STS_IOERR;
+ goto fail;
}
/*
@@ -1264,7 +1265,7 @@ static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
if (req_op(rq) == REQ_OP_ZONE_APPEND) {
ret = sd_zbc_prepare_zone_append(cmd, &lba, nr_blocks);
if (ret)
- return ret;
+ goto fail;
}
fua = rq->cmd_flags & REQ_FUA ? 0x8 : 0;
@@ -1292,7 +1293,7 @@ static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
}
if (unlikely(ret != BLK_STS_OK))
- return ret;
+ goto fail;
/*
* We shouldn't disconnect in the middle of a sector, so with a dumb
@@ -1316,10 +1317,12 @@ static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
blk_rq_sectors(rq)));
/*
- * This indicates that the command is ready from our end to be
- * queued.
+ * This indicates that the command is ready from our end to be queued.
*/
return BLK_STS_OK;
+fail:
+ scsi_free_sgtables(cmd);
+ return ret;
}
static blk_status_t sd_init_command(struct scsi_cmnd *cmd)
diff --git a/drivers/scsi/snic/vnic_cq.c b/drivers/scsi/snic/vnic_cq.c
index 4c8e64e..3455dd7 100644
--- a/drivers/scsi/snic/vnic_cq.c
+++ b/drivers/scsi/snic/vnic_cq.c
@@ -31,8 +31,6 @@ void svnic_cq_free(struct vnic_cq *cq)
int svnic_cq_alloc(struct vnic_dev *vdev, struct vnic_cq *cq,
unsigned int index, unsigned int desc_count, unsigned int desc_size)
{
- int err;
-
cq->index = index;
cq->vdev = vdev;
@@ -43,11 +41,7 @@ int svnic_cq_alloc(struct vnic_dev *vdev, struct vnic_cq *cq,
return -EINVAL;
}
- err = svnic_dev_alloc_desc_ring(vdev, &cq->ring, desc_count, desc_size);
- if (err)
- return err;
-
- return 0;
+ return svnic_dev_alloc_desc_ring(vdev, &cq->ring, desc_count, desc_size);
}
void svnic_cq_init(struct vnic_cq *cq, unsigned int flow_control_enable,
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 2b43c0f..fd4b582 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -392,15 +392,11 @@ static blk_status_t sr_init_command(struct scsi_cmnd *SCpnt)
struct request *rq = SCpnt->request;
blk_status_t ret;
- ret = scsi_init_io(SCpnt);
+ ret = scsi_alloc_sgtables(SCpnt);
if (ret != BLK_STS_OK)
- goto out;
+ return ret;
cd = scsi_cd(rq->rq_disk);
- /* from here on until we're complete, any goto out
- * is used for a killable error condition */
- ret = BLK_STS_IOERR;
-
SCSI_LOG_HLQUEUE(1, scmd_printk(KERN_INFO, SCpnt,
"Doing sr request, block = %d\n", block));
@@ -507,14 +503,15 @@ static blk_status_t sr_init_command(struct scsi_cmnd *SCpnt)
SCpnt->transfersize = cd->device->sector_size;
SCpnt->underflow = this_count << 9;
SCpnt->allowed = MAX_RETRIES;
+ SCpnt->cmd_len = 10;
/*
- * This indicates that the command is ready from our end to be
- * queued.
+ * This indicates that the command is ready from our end to be queued.
*/
- ret = BLK_STS_OK;
+ return BLK_STS_OK;
out:
- return ret;
+ scsi_free_sgtables(SCpnt);
+ return BLK_STS_IOERR;
}
static void sr_revalidate_disk(struct scsi_cd *cd)
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index cc11daa..a9fe092a 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -5656,7 +5656,7 @@ int sym_hcb_attach(struct Scsi_Host *shost, struct sym_fw *fw, struct sym_nvram
/*
* Allocate the array of lists of CCBs hashed by DSA.
*/
- np->ccbh = kcalloc(CCB_HASH_SIZE, sizeof(struct sym_ccb **), GFP_KERNEL);
+ np->ccbh = kcalloc(CCB_HASH_SIZE, sizeof(*np->ccbh), GFP_KERNEL);
if (!np->ccbh)
goto attach_failed;
diff --git a/drivers/soc/actions/owl-sps-helper.c b/drivers/soc/actions/owl-sps-helper.c
index 291a206..e3f3660 100644
--- a/drivers/soc/actions/owl-sps-helper.c
+++ b/drivers/soc/actions/owl-sps-helper.c
@@ -10,6 +10,7 @@
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/soc/actions/owl-sps.h>
#define OWL_SPS_PG_CTL 0x0
diff --git a/drivers/soc/amlogic/meson-ee-pwrc.c b/drivers/soc/amlogic/meson-ee-pwrc.c
index 43665b7..5164a4d 100644
--- a/drivers/soc/amlogic/meson-ee-pwrc.c
+++ b/drivers/soc/amlogic/meson-ee-pwrc.c
@@ -15,6 +15,7 @@
#include <linux/reset.h>
#include <linux/clk.h>
#include <dt-bindings/power/meson8-power.h>
+#include <dt-bindings/power/meson-axg-power.h>
#include <dt-bindings/power/meson-g12a-power.h>
#include <dt-bindings/power/meson-gxbb-power.h>
#include <dt-bindings/power/meson-sm1-power.h>
@@ -134,6 +135,11 @@ static struct meson_ee_pwrc_top_domain sm1_pwrc_ge2d = SM1_EE_PD(19);
{ __reg, BIT(14) }, \
{ __reg, BIT(15) }
+static struct meson_ee_pwrc_mem_domain axg_pwrc_mem_vpu[] = {
+ VPU_MEMPD(HHI_VPU_MEM_PD_REG0),
+ VPU_HHI_MEMPD(HHI_MEM_PD_REG0),
+};
+
static struct meson_ee_pwrc_mem_domain g12a_pwrc_mem_vpu[] = {
VPU_MEMPD(HHI_VPU_MEM_PD_REG0),
VPU_MEMPD(HHI_VPU_MEM_PD_REG1),
@@ -190,6 +196,10 @@ static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_ge2d[] = {
{ HHI_MEM_PD_REG0, GENMASK(25, 18) },
};
+static struct meson_ee_pwrc_mem_domain axg_pwrc_mem_audio[] = {
+ { HHI_MEM_PD_REG0, GENMASK(5, 4) },
+};
+
static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_audio[] = {
{ HHI_MEM_PD_REG0, GENMASK(5, 4) },
{ HHI_AUDIO_MEM_PD_REG0, GENMASK(1, 0) },
@@ -231,6 +241,13 @@ static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_audio[] = {
static bool pwrc_ee_get_power(struct meson_ee_pwrc_domain *pwrc_domain);
+static struct meson_ee_pwrc_domain_desc axg_pwrc_domains[] = {
+ [PWRC_AXG_VPU_ID] = VPU_PD("VPU", &gx_pwrc_vpu, axg_pwrc_mem_vpu,
+ pwrc_ee_get_power, 5, 2),
+ [PWRC_AXG_ETHERNET_MEM_ID] = MEM_PD("ETH", meson_pwrc_mem_eth),
+ [PWRC_AXG_AUDIO_ID] = MEM_PD("AUDIO", axg_pwrc_mem_audio),
+};
+
static struct meson_ee_pwrc_domain_desc g12a_pwrc_domains[] = {
[PWRC_G12A_VPU_ID] = VPU_PD("VPU", &gx_pwrc_vpu, g12a_pwrc_mem_vpu,
pwrc_ee_get_power, 11, 2),
@@ -433,8 +450,8 @@ static int meson_ee_pwrc_init_domain(struct platform_device *pdev,
if (ret)
return ret;
- ret = pm_genpd_init(&dom->base, &pm_domain_always_on_gov,
- false);
+ dom->base.flags = GENPD_FLAG_ALWAYS_ON;
+ ret = pm_genpd_init(&dom->base, NULL, false);
if (ret)
return ret;
} else {
@@ -529,6 +546,11 @@ static struct meson_ee_pwrc_domain_data meson_ee_g12a_pwrc_data = {
.domains = g12a_pwrc_domains,
};
+static struct meson_ee_pwrc_domain_data meson_ee_axg_pwrc_data = {
+ .count = ARRAY_SIZE(axg_pwrc_domains),
+ .domains = axg_pwrc_domains,
+};
+
static struct meson_ee_pwrc_domain_data meson_ee_gxbb_pwrc_data = {
.count = ARRAY_SIZE(gxbb_pwrc_domains),
.domains = gxbb_pwrc_domains,
@@ -563,6 +585,10 @@ static const struct of_device_id meson_ee_pwrc_match_table[] = {
.data = &meson_ee_m8b_pwrc_data,
},
{
+ .compatible = "amlogic,meson-axg-pwrc",
+ .data = &meson_ee_axg_pwrc_data,
+ },
+ {
.compatible = "amlogic,meson-gxbb-pwrc",
.data = &meson_ee_gxbb_pwrc_data,
},
diff --git a/drivers/soc/amlogic/meson-gx-pwrc-vpu.c b/drivers/soc/amlogic/meson-gx-pwrc-vpu.c
index 511b685..21b4bc8 100644
--- a/drivers/soc/amlogic/meson-gx-pwrc-vpu.c
+++ b/drivers/soc/amlogic/meson-gx-pwrc-vpu.c
@@ -339,8 +339,8 @@ static int meson_gx_pwrc_vpu_probe(struct platform_device *pdev)
return ret;
}
- pm_genpd_init(&vpu_pd->genpd, &pm_domain_always_on_gov,
- powered_off);
+ vpu_pd->genpd.flags = GENPD_FLAG_ALWAYS_ON;
+ pm_genpd_init(&vpu_pd->genpd, NULL, powered_off);
return of_genpd_add_provider_simple(pdev->dev.of_node,
&vpu_pd->genpd);
diff --git a/drivers/soc/bcm/Kconfig b/drivers/soc/bcm/Kconfig
index 648e326..24f92a6 100644
--- a/drivers/soc/bcm/Kconfig
+++ b/drivers/soc/bcm/Kconfig
@@ -22,6 +22,15 @@
This enables support for the RPi power domains which can be enabled
or disabled via the RPi firmware.
+config SOC_BCM63XX
+ bool "Broadcom 63xx SoC drivers"
+ depends on BMIPS_GENERIC || COMPILE_TEST
+ help
+ Enables drivers for the Broadcom 63xx series of chips.
+ Drivers can be enabled individually within this menu.
+
+ If unsure, say N.
+
config SOC_BRCMSTB
bool "Broadcom STB SoC drivers"
depends on ARM || ARM64 || BMIPS_GENERIC || COMPILE_TEST
@@ -33,6 +42,7 @@
If unsure, say N.
+source "drivers/soc/bcm/bcm63xx/Kconfig"
source "drivers/soc/bcm/brcmstb/Kconfig"
endmenu
diff --git a/drivers/soc/bcm/Makefile b/drivers/soc/bcm/Makefile
index d92268a..7bc90e0b 100644
--- a/drivers/soc/bcm/Makefile
+++ b/drivers/soc/bcm/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_BCM2835_POWER) += bcm2835-power.o
obj-$(CONFIG_RASPBERRYPI_POWER) += raspberrypi-power.o
+obj-$(CONFIG_SOC_BCM63XX) += bcm63xx/
obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/
diff --git a/drivers/soc/bcm/bcm63xx/Kconfig b/drivers/soc/bcm/bcm63xx/Kconfig
new file mode 100644
index 0000000..16f648a
--- /dev/null
+++ b/drivers/soc/bcm/bcm63xx/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0-only
+if SOC_BCM63XX
+
+config BCM63XX_POWER
+ bool "BCM63xx power domain driver"
+ depends on BMIPS_GENERIC || (COMPILE_TEST && OF)
+ select PM_GENERIC_DOMAINS if PM
+ help
+ This enables support for the BCM63xx power domains controller on
+ BCM6318, BCM6328, BCM6362 and BCM63268 SoCs.
+
+endif # SOC_BCM63XX
diff --git a/drivers/soc/bcm/bcm63xx/Makefile b/drivers/soc/bcm/bcm63xx/Makefile
new file mode 100644
index 0000000..0710d5e
--- /dev/null
+++ b/drivers/soc/bcm/bcm63xx/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_BCM63XX_POWER) += bcm63xx-power.o
diff --git a/drivers/soc/bcm/bcm63xx/bcm63xx-power.c b/drivers/soc/bcm/bcm63xx/bcm63xx-power.c
new file mode 100644
index 0000000..515fe18
--- /dev/null
+++ b/drivers/soc/bcm/bcm63xx/bcm63xx-power.c
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * BCM63xx Power Domain Controller Driver
+ *
+ * Copyright (C) 2020 Álvaro Fernández Rojas <noltari@gmail.com>
+ */
+
+#include <dt-bindings/soc/bcm6318-pm.h>
+#include <dt-bindings/soc/bcm6328-pm.h>
+#include <dt-bindings/soc/bcm6362-pm.h>
+#include <dt-bindings/soc/bcm63268-pm.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+struct bcm63xx_power_dev {
+ struct generic_pm_domain genpd;
+ struct bcm63xx_power *power;
+ uint32_t mask;
+};
+
+struct bcm63xx_power {
+ void __iomem *base;
+ spinlock_t lock;
+ struct bcm63xx_power_dev *dev;
+ struct genpd_onecell_data genpd_data;
+ struct generic_pm_domain **genpd;
+};
+
+struct bcm63xx_power_data {
+ const char * const name;
+ uint8_t bit;
+ unsigned int flags;
+};
+
+static int bcm63xx_power_get_state(struct bcm63xx_power_dev *pmd, bool *is_on)
+{
+ struct bcm63xx_power *power = pmd->power;
+
+ if (!pmd->mask) {
+ *is_on = false;
+ return -EINVAL;
+ }
+
+ *is_on = !(__raw_readl(power->base) & pmd->mask);
+
+ return 0;
+}
+
+static int bcm63xx_power_set_state(struct bcm63xx_power_dev *pmd, bool on)
+{
+ struct bcm63xx_power *power = pmd->power;
+ unsigned long flags;
+ uint32_t val;
+
+ if (!pmd->mask)
+ return -EINVAL;
+
+ spin_lock_irqsave(&power->lock, flags);
+ val = __raw_readl(power->base);
+ if (on)
+ val &= ~pmd->mask;
+ else
+ val |= pmd->mask;
+ __raw_writel(val, power->base);
+ spin_unlock_irqrestore(&power->lock, flags);
+
+ return 0;
+}
+
+static int bcm63xx_power_on(struct generic_pm_domain *genpd)
+{
+ struct bcm63xx_power_dev *pmd = container_of(genpd,
+ struct bcm63xx_power_dev, genpd);
+
+ return bcm63xx_power_set_state(pmd, true);
+}
+
+static int bcm63xx_power_off(struct generic_pm_domain *genpd)
+{
+ struct bcm63xx_power_dev *pmd = container_of(genpd,
+ struct bcm63xx_power_dev, genpd);
+
+ return bcm63xx_power_set_state(pmd, false);
+}
+
+static int bcm63xx_power_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct resource *res;
+ const struct bcm63xx_power_data *entry, *table;
+ struct bcm63xx_power *power;
+ unsigned int ndom;
+ uint8_t max_bit = 0;
+ int ret;
+
+ power = devm_kzalloc(dev, sizeof(*power), GFP_KERNEL);
+ if (!power)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ power->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(power->base))
+ return PTR_ERR(power->base);
+
+ table = of_device_get_match_data(dev);
+ if (!table)
+ return -EINVAL;
+
+ power->genpd_data.num_domains = 0;
+ ndom = 0;
+ for (entry = table; entry->name; entry++) {
+ max_bit = max(max_bit, entry->bit);
+ ndom++;
+ }
+
+ if (!ndom)
+ return -ENODEV;
+
+ power->genpd_data.num_domains = max_bit + 1;
+
+ power->dev = devm_kcalloc(dev, power->genpd_data.num_domains,
+ sizeof(struct bcm63xx_power_dev),
+ GFP_KERNEL);
+ if (!power->dev)
+ return -ENOMEM;
+
+ power->genpd = devm_kcalloc(dev, power->genpd_data.num_domains,
+ sizeof(struct generic_pm_domain *),
+ GFP_KERNEL);
+ if (!power->genpd)
+ return -ENOMEM;
+
+ power->genpd_data.domains = power->genpd;
+
+ ndom = 0;
+ for (entry = table; entry->name; entry++) {
+ struct bcm63xx_power_dev *pmd = &power->dev[ndom];
+ bool is_on;
+
+ pmd->power = power;
+ pmd->mask = BIT(entry->bit);
+ pmd->genpd.name = entry->name;
+ pmd->genpd.flags = entry->flags;
+
+ ret = bcm63xx_power_get_state(pmd, &is_on);
+ if (ret)
+ dev_warn(dev, "unable to get current state for %s\n",
+ pmd->genpd.name);
+
+ pmd->genpd.power_on = bcm63xx_power_on;
+ pmd->genpd.power_off = bcm63xx_power_off;
+
+ pm_genpd_init(&pmd->genpd, NULL, !is_on);
+ power->genpd[entry->bit] = &pmd->genpd;
+
+ ndom++;
+ }
+
+ spin_lock_init(&power->lock);
+
+ ret = of_genpd_add_provider_onecell(np, &power->genpd_data);
+ if (ret) {
+ dev_err(dev, "failed to register genpd driver: %d\n", ret);
+ return ret;
+ }
+
+ dev_info(dev, "registered %u power domains\n", ndom);
+
+ return 0;
+}
+
+static const struct bcm63xx_power_data bcm6318_power_domains[] = {
+ {
+ .name = "pcie",
+ .bit = BCM6318_POWER_DOMAIN_PCIE,
+ }, {
+ .name = "usb",
+ .bit = BCM6318_POWER_DOMAIN_USB,
+ }, {
+ .name = "ephy0",
+ .bit = BCM6318_POWER_DOMAIN_EPHY0,
+ }, {
+ .name = "ephy1",
+ .bit = BCM6318_POWER_DOMAIN_EPHY1,
+ }, {
+ .name = "ephy2",
+ .bit = BCM6318_POWER_DOMAIN_EPHY2,
+ }, {
+ .name = "ephy3",
+ .bit = BCM6318_POWER_DOMAIN_EPHY3,
+ }, {
+ .name = "ldo2p5",
+ .bit = BCM6318_POWER_DOMAIN_LDO2P5,
+ .flags = GENPD_FLAG_ALWAYS_ON,
+ }, {
+ .name = "ldo2p9",
+ .bit = BCM6318_POWER_DOMAIN_LDO2P9,
+ .flags = GENPD_FLAG_ALWAYS_ON,
+ }, {
+ .name = "sw1p0",
+ .bit = BCM6318_POWER_DOMAIN_SW1P0,
+ .flags = GENPD_FLAG_ALWAYS_ON,
+ }, {
+ .name = "pad",
+ .bit = BCM6318_POWER_DOMAIN_PAD,
+ .flags = GENPD_FLAG_ALWAYS_ON,
+ }, {
+ /* sentinel */
+ },
+};
+
+static const struct bcm63xx_power_data bcm6328_power_domains[] = {
+ {
+ .name = "adsl2-mips",
+ .bit = BCM6328_POWER_DOMAIN_ADSL2_MIPS,
+ }, {
+ .name = "adsl2-phy",
+ .bit = BCM6328_POWER_DOMAIN_ADSL2_PHY,
+ }, {
+ .name = "adsl2-afe",
+ .bit = BCM6328_POWER_DOMAIN_ADSL2_AFE,
+ }, {
+ .name = "sar",
+ .bit = BCM6328_POWER_DOMAIN_SAR,
+ }, {
+ .name = "pcm",
+ .bit = BCM6328_POWER_DOMAIN_PCM,
+ }, {
+ .name = "usbd",
+ .bit = BCM6328_POWER_DOMAIN_USBD,
+ }, {
+ .name = "usbh",
+ .bit = BCM6328_POWER_DOMAIN_USBH,
+ }, {
+ .name = "pcie",
+ .bit = BCM6328_POWER_DOMAIN_PCIE,
+ }, {
+ .name = "robosw",
+ .bit = BCM6328_POWER_DOMAIN_ROBOSW,
+ }, {
+ .name = "ephy",
+ .bit = BCM6328_POWER_DOMAIN_EPHY,
+ }, {
+ /* sentinel */
+ },
+};
+
+static const struct bcm63xx_power_data bcm6362_power_domains[] = {
+ {
+ .name = "sar",
+ .bit = BCM6362_POWER_DOMAIN_SAR,
+ }, {
+ .name = "ipsec",
+ .bit = BCM6362_POWER_DOMAIN_IPSEC,
+ }, {
+ .name = "mips",
+ .bit = BCM6362_POWER_DOMAIN_MIPS,
+ .flags = GENPD_FLAG_ALWAYS_ON,
+ }, {
+ .name = "dect",
+ .bit = BCM6362_POWER_DOMAIN_DECT,
+ }, {
+ .name = "usbh",
+ .bit = BCM6362_POWER_DOMAIN_USBH,
+ }, {
+ .name = "usbd",
+ .bit = BCM6362_POWER_DOMAIN_USBD,
+ }, {
+ .name = "robosw",
+ .bit = BCM6362_POWER_DOMAIN_ROBOSW,
+ }, {
+ .name = "pcm",
+ .bit = BCM6362_POWER_DOMAIN_PCM,
+ }, {
+ .name = "periph",
+ .bit = BCM6362_POWER_DOMAIN_PERIPH,
+ .flags = GENPD_FLAG_ALWAYS_ON,
+ }, {
+ .name = "adsl-phy",
+ .bit = BCM6362_POWER_DOMAIN_ADSL_PHY,
+ }, {
+ .name = "gmii-pads",
+ .bit = BCM6362_POWER_DOMAIN_GMII_PADS,
+ }, {
+ .name = "fap",
+ .bit = BCM6362_POWER_DOMAIN_FAP,
+ }, {
+ .name = "pcie",
+ .bit = BCM6362_POWER_DOMAIN_PCIE,
+ }, {
+ .name = "wlan-pads",
+ .bit = BCM6362_POWER_DOMAIN_WLAN_PADS,
+ }, {
+ /* sentinel */
+ },
+};
+
+static const struct bcm63xx_power_data bcm63268_power_domains[] = {
+ {
+ .name = "sar",
+ .bit = BCM63268_POWER_DOMAIN_SAR,
+ }, {
+ .name = "ipsec",
+ .bit = BCM63268_POWER_DOMAIN_IPSEC,
+ }, {
+ .name = "mips",
+ .bit = BCM63268_POWER_DOMAIN_MIPS,
+ .flags = GENPD_FLAG_ALWAYS_ON,
+ }, {
+ .name = "dect",
+ .bit = BCM63268_POWER_DOMAIN_DECT,
+ }, {
+ .name = "usbh",
+ .bit = BCM63268_POWER_DOMAIN_USBH,
+ }, {
+ .name = "usbd",
+ .bit = BCM63268_POWER_DOMAIN_USBD,
+ }, {
+ .name = "robosw",
+ .bit = BCM63268_POWER_DOMAIN_ROBOSW,
+ }, {
+ .name = "pcm",
+ .bit = BCM63268_POWER_DOMAIN_PCM,
+ }, {
+ .name = "periph",
+ .bit = BCM63268_POWER_DOMAIN_PERIPH,
+ .flags = GENPD_FLAG_ALWAYS_ON,
+ }, {
+ .name = "vdsl-phy",
+ .bit = BCM63268_POWER_DOMAIN_VDSL_PHY,
+ }, {
+ .name = "vdsl-mips",
+ .bit = BCM63268_POWER_DOMAIN_VDSL_MIPS,
+ }, {
+ .name = "fap",
+ .bit = BCM63268_POWER_DOMAIN_FAP,
+ }, {
+ .name = "pcie",
+ .bit = BCM63268_POWER_DOMAIN_PCIE,
+ }, {
+ .name = "wlan-pads",
+ .bit = BCM63268_POWER_DOMAIN_WLAN_PADS,
+ }, {
+ /* sentinel */
+ },
+};
+
+static const struct of_device_id bcm63xx_power_of_match[] = {
+ {
+ .compatible = "brcm,bcm6318-power-controller",
+ .data = &bcm6318_power_domains,
+ }, {
+ .compatible = "brcm,bcm6328-power-controller",
+ .data = &bcm6328_power_domains,
+ }, {
+ .compatible = "brcm,bcm6362-power-controller",
+ .data = &bcm6362_power_domains,
+ }, {
+ .compatible = "brcm,bcm63268-power-controller",
+ .data = &bcm63268_power_domains,
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct platform_driver bcm63xx_power_driver = {
+ .driver = {
+ .name = "bcm63xx-power-controller",
+ .of_match_table = bcm63xx_power_of_match,
+ },
+ .probe = bcm63xx_power_probe,
+};
+builtin_platform_driver(bcm63xx_power_driver);
diff --git a/drivers/soc/bcm/brcmstb/biuctrl.c b/drivers/soc/bcm/brcmstb/biuctrl.c
index 61731e0..7f8dc30 100644
--- a/drivers/soc/bcm/brcmstb/biuctrl.c
+++ b/drivers/soc/bcm/brcmstb/biuctrl.c
@@ -13,6 +13,22 @@
#include <linux/syscore_ops.h>
#include <linux/soc/brcmstb/brcmstb.h>
+#define RACENPREF_MASK 0x3
+#define RACPREFINST_SHIFT 0
+#define RACENINST_SHIFT 2
+#define RACPREFDATA_SHIFT 4
+#define RACENDATA_SHIFT 6
+#define RAC_CPU_SHIFT 8
+#define RACCFG_MASK 0xff
+#define DPREF_LINE_2_SHIFT 24
+#define DPREF_LINE_2_MASK 0xff
+
+/* Bitmask to enable instruction and data prefetching with a 256-bytes stride */
+#define RAC_DATA_INST_EN_MASK (1 << RACPREFINST_SHIFT | \
+ RACENPREF_MASK << RACENINST_SHIFT | \
+ 1 << RACPREFDATA_SHIFT | \
+ RACENPREF_MASK << RACENDATA_SHIFT)
+
#define CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK 0x70000000
#define CPU_CREDIT_REG_MCPx_READ_CRED_MASK 0xf
#define CPU_CREDIT_REG_MCPx_WRITE_CRED_MASK 0xf
@@ -31,11 +47,21 @@ static void __iomem *cpubiuctrl_base;
static bool mcp_wr_pairing_en;
static const int *cpubiuctrl_regs;
+enum cpubiuctrl_regs {
+ CPU_CREDIT_REG = 0,
+ CPU_MCP_FLOW_REG,
+ CPU_WRITEBACK_CTRL_REG,
+ RAC_CONFIG0_REG,
+ RAC_CONFIG1_REG,
+ NUM_CPU_BIUCTRL_REGS,
+};
+
static inline u32 cbc_readl(int reg)
{
int offset = cpubiuctrl_regs[reg];
- if (offset == -1)
+ if (offset == -1 ||
+ (IS_ENABLED(CONFIG_CACHE_B15_RAC) && reg >= RAC_CONFIG0_REG))
return (u32)-1;
return readl_relaxed(cpubiuctrl_base + offset);
@@ -45,22 +71,19 @@ static inline void cbc_writel(u32 val, int reg)
{
int offset = cpubiuctrl_regs[reg];
- if (offset == -1)
+ if (offset == -1 ||
+ (IS_ENABLED(CONFIG_CACHE_B15_RAC) && reg >= RAC_CONFIG0_REG))
return;
writel(val, cpubiuctrl_base + offset);
}
-enum cpubiuctrl_regs {
- CPU_CREDIT_REG = 0,
- CPU_MCP_FLOW_REG,
- CPU_WRITEBACK_CTRL_REG
-};
-
static const int b15_cpubiuctrl_regs[] = {
[CPU_CREDIT_REG] = 0x184,
[CPU_MCP_FLOW_REG] = -1,
[CPU_WRITEBACK_CTRL_REG] = -1,
+ [RAC_CONFIG0_REG] = -1,
+ [RAC_CONFIG1_REG] = -1,
};
/* Odd cases, e.g: 7260A0 */
@@ -68,22 +91,26 @@ static const int b53_cpubiuctrl_no_wb_regs[] = {
[CPU_CREDIT_REG] = 0x0b0,
[CPU_MCP_FLOW_REG] = 0x0b4,
[CPU_WRITEBACK_CTRL_REG] = -1,
+ [RAC_CONFIG0_REG] = 0x78,
+ [RAC_CONFIG1_REG] = 0x7c,
};
static const int b53_cpubiuctrl_regs[] = {
[CPU_CREDIT_REG] = 0x0b0,
[CPU_MCP_FLOW_REG] = 0x0b4,
[CPU_WRITEBACK_CTRL_REG] = 0x22c,
+ [RAC_CONFIG0_REG] = 0x78,
+ [RAC_CONFIG1_REG] = 0x7c,
};
static const int a72_cpubiuctrl_regs[] = {
[CPU_CREDIT_REG] = 0x18,
[CPU_MCP_FLOW_REG] = 0x1c,
[CPU_WRITEBACK_CTRL_REG] = 0x20,
+ [RAC_CONFIG0_REG] = 0x08,
+ [RAC_CONFIG1_REG] = 0x0c,
};
-#define NUM_CPU_BIUCTRL_REGS 3
-
static int __init mcp_write_pairing_set(void)
{
u32 creds = 0;
@@ -110,6 +137,8 @@ static int __init mcp_write_pairing_set(void)
static const u32 a72_b53_mach_compat[] = {
0x7211,
0x7216,
+ 0x72164,
+ 0x72165,
0x7255,
0x7260,
0x7268,
@@ -117,6 +146,61 @@ static const u32 a72_b53_mach_compat[] = {
0x7278,
};
+/* The read-ahead cache present in the Brahma-B53 CPU is a special piece of
+ * hardware after the integrated L2 cache of the B53 CPU complex whose purpose
+ * is to prefetch instruction and/or data with a line size of either 64 bytes
+ * or 256 bytes. The rationale is that the data-bus of the CPU interface is
+ * optimized for 256-byte transactions, and enabling the read-ahead cache
+ * provides a significant performance boost (typically twice the performance
+ * for a memcpy benchmark application).
+ *
+ * The read-ahead cache is transparent for Virtual Address cache maintenance
+ * operations: IC IVAU, DC IVAC, DC CVAC, DC CVAU and DC CIVAC. So no special
+ * handling is needed for the DMA API above and beyond what is included in the
+ * arm64 implementation.
+ *
+ * In addition, since the Point of Unification is typically between L1 and L2
+ * for the Brahma-B53 processor no special read-ahead cache handling is needed
+ * for the IC IALLU and IC IALLUIS cache maintenance operations.
+ *
+ * However, it is not possible to specify the cache level (L3) for the cache
+ * maintenance instructions operating by set/way to operate on the read-ahead
+ * cache. The read-ahead cache will maintain coherency when inner cache lines
+ * are cleaned by set/way, but if it is necessary to invalidate inner cache
+ * lines by set/way to maintain coherency with system masters operating on
+ * shared memory that does not have hardware support for coherency, then it
+ * will also be necessary to explicitly invalidate the read-ahead cache.
+ */
+static void __init a72_b53_rac_enable_all(struct device_node *np)
+{
+ unsigned int cpu;
+ u32 enable = 0, pref_dist, shift;
+
+ if (IS_ENABLED(CONFIG_CACHE_B15_RAC))
+ return;
+
+ if (WARN(num_possible_cpus() > 4, "RAC only supports 4 CPUs\n"))
+ return;
+
+ pref_dist = cbc_readl(RAC_CONFIG1_REG);
+ for_each_possible_cpu(cpu) {
+ shift = cpu * RAC_CPU_SHIFT + RACPREFDATA_SHIFT;
+ enable |= RAC_DATA_INST_EN_MASK << (cpu * RAC_CPU_SHIFT);
+ if (cpubiuctrl_regs == a72_cpubiuctrl_regs) {
+ enable &= ~(RACENPREF_MASK << shift);
+ enable |= 3 << shift;
+ pref_dist |= 1 << (cpu + DPREF_LINE_2_SHIFT);
+ }
+ }
+
+ cbc_writel(enable, RAC_CONFIG0_REG);
+ cbc_writel(pref_dist, RAC_CONFIG1_REG);
+
+ pr_info("%pOF: Broadcom %s read-ahead cache\n",
+ np, cpubiuctrl_regs == a72_cpubiuctrl_regs ?
+ "Cortex-A72" : "Brahma-B53");
+}
+
static void __init mcp_a72_b53_set(void)
{
unsigned int i;
@@ -262,6 +346,7 @@ static int __init brcmstb_biuctrl_init(void)
return ret;
}
+ a72_b53_rac_enable_all(np);
mcp_a72_b53_set();
#ifdef CONFIG_PM_SLEEP
register_syscore_ops(&brcmstb_cpu_credit_syscore_ops);
diff --git a/drivers/soc/fsl/dpio/qbman-portal.c b/drivers/soc/fsl/dpio/qbman-portal.c
index 0ab85bf..659b4a5 100644
--- a/drivers/soc/fsl/dpio/qbman-portal.c
+++ b/drivers/soc/fsl/dpio/qbman-portal.c
@@ -647,7 +647,6 @@ int qbman_swp_enqueue_multiple_direct(struct qbman_swp *s,
const uint32_t *cl = (uint32_t *)d;
uint32_t eqcr_ci, eqcr_pi, half_mask, full_mask;
int i, num_enqueued = 0;
- uint64_t addr_cena;
spin_lock(&s->access_spinlock);
half_mask = (s->eqcr.pi_ci_mask>>1);
@@ -701,7 +700,6 @@ int qbman_swp_enqueue_multiple_direct(struct qbman_swp *s,
/* Flush all the cacheline without load/store in between */
eqcr_pi = s->eqcr.pi;
- addr_cena = (size_t)s->addr_cena;
for (i = 0; i < num_enqueued; i++)
eqcr_pi++;
s->eqcr.pi = eqcr_pi & full_mask;
diff --git a/drivers/soc/fsl/qbman/bman.c b/drivers/soc/fsl/qbman/bman.c
index f4fb527..c5dd026 100644
--- a/drivers/soc/fsl/qbman/bman.c
+++ b/drivers/soc/fsl/qbman/bman.c
@@ -660,7 +660,7 @@ int bm_shutdown_pool(u32 bpid)
}
done:
put_affine_portal();
- return 0;
+ return err;
}
struct gen_pool *bm_bpalloc;
diff --git a/drivers/soc/fsl/qbman/qman_test_api.c b/drivers/soc/fsl/qbman/qman_test_api.c
index 2895d06..7066b2f 100644
--- a/drivers/soc/fsl/qbman/qman_test_api.c
+++ b/drivers/soc/fsl/qbman/qman_test_api.c
@@ -86,7 +86,7 @@ static void fd_inc(struct qm_fd *fd)
len--;
qm_fd_set_param(fd, fmt, off, len);
- fd->cmd = cpu_to_be32(be32_to_cpu(fd->cmd) + 1);
+ be32_add_cpu(&fd->cmd, 1);
}
/* The only part of the 'fd' we can't memcmp() is the ppid */
diff --git a/drivers/soc/fsl/qe/ucc.c b/drivers/soc/fsl/qe/ucc.c
index cac0fb7..21dbcd7 100644
--- a/drivers/soc/fsl/qe/ucc.c
+++ b/drivers/soc/fsl/qe/ucc.c
@@ -523,7 +523,7 @@ int ucc_set_tdm_rxtx_clk(u32 tdm_num, enum qe_clock clock,
qe_mux_reg = &qe_immr->qmx;
- if (tdm_num > 7 || tdm_num < 0)
+ if (tdm_num > 7)
return -EINVAL;
/* The communications direction must be RX or TX */
diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 6cf8a7a..db7e7fc 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -487,22 +487,17 @@ static int imx_pgc_domain_probe(struct platform_device *pdev)
domain->regulator = devm_regulator_get_optional(domain->dev, "power");
if (IS_ERR(domain->regulator)) {
- if (PTR_ERR(domain->regulator) != -ENODEV) {
- if (PTR_ERR(domain->regulator) != -EPROBE_DEFER)
- dev_err(domain->dev, "Failed to get domain's regulator\n");
- return PTR_ERR(domain->regulator);
- }
+ if (PTR_ERR(domain->regulator) != -ENODEV)
+ return dev_err_probe(domain->dev, PTR_ERR(domain->regulator),
+ "Failed to get domain's regulator\n");
} else if (domain->voltage) {
regulator_set_voltage(domain->regulator,
domain->voltage, domain->voltage);
}
ret = imx_pgc_get_clocks(domain);
- if (ret) {
- if (ret != -EPROBE_DEFER)
- dev_err(domain->dev, "Failed to get domain's clocks\n");
- return ret;
- }
+ if (ret)
+ return dev_err_probe(domain->dev, ret, "Failed to get domain's clocks\n");
ret = pm_genpd_init(&domain->genpd, NULL, true);
if (ret) {
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index dc644cf..505651b 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -13,11 +13,16 @@
#define CMDQ_POLL_ENABLE_MASK BIT(0)
#define CMDQ_EOC_IRQ_EN BIT(0)
#define CMDQ_REG_TYPE 1
+#define CMDQ_JUMP_RELATIVE 1
struct cmdq_instruction {
union {
u32 value;
u32 mask;
+ struct {
+ u16 arg_c;
+ u16 src_reg;
+ };
};
union {
u16 offset;
@@ -223,15 +228,104 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
}
EXPORT_SYMBOL(cmdq_pkt_write_mask);
-int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
+int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low,
+ u16 reg_idx)
+{
+ struct cmdq_instruction inst = {};
+
+ inst.op = CMDQ_CODE_READ_S;
+ inst.dst_t = CMDQ_REG_TYPE;
+ inst.sop = high_addr_reg_idx;
+ inst.reg_dst = reg_idx;
+ inst.src_reg = addr_low;
+
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_read_s);
+
+int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+ u16 addr_low, u16 src_reg_idx)
+{
+ struct cmdq_instruction inst = {};
+
+ inst.op = CMDQ_CODE_WRITE_S;
+ inst.src_t = CMDQ_REG_TYPE;
+ inst.sop = high_addr_reg_idx;
+ inst.offset = addr_low;
+ inst.src_reg = src_reg_idx;
+
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s);
+
+int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+ u16 addr_low, u16 src_reg_idx, u32 mask)
+{
+ struct cmdq_instruction inst = {};
+ int err;
+
+ inst.op = CMDQ_CODE_MASK;
+ inst.mask = ~mask;
+ err = cmdq_pkt_append_command(pkt, inst);
+ if (err < 0)
+ return err;
+
+ inst.mask = 0;
+ inst.op = CMDQ_CODE_WRITE_S_MASK;
+ inst.src_t = CMDQ_REG_TYPE;
+ inst.sop = high_addr_reg_idx;
+ inst.offset = addr_low;
+ inst.src_reg = src_reg_idx;
+
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s_mask);
+
+int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
+ u16 addr_low, u32 value)
+{
+ struct cmdq_instruction inst = {};
+
+ inst.op = CMDQ_CODE_WRITE_S;
+ inst.sop = high_addr_reg_idx;
+ inst.offset = addr_low;
+ inst.value = value;
+
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s_value);
+
+int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
+ u16 addr_low, u32 value, u32 mask)
+{
+ struct cmdq_instruction inst = {};
+ int err;
+
+ inst.op = CMDQ_CODE_MASK;
+ inst.mask = ~mask;
+ err = cmdq_pkt_append_command(pkt, inst);
+ if (err < 0)
+ return err;
+
+ inst.op = CMDQ_CODE_WRITE_S_MASK;
+ inst.sop = high_addr_reg_idx;
+ inst.offset = addr_low;
+ inst.value = value;
+
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s_mask_value);
+
+int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear)
{
struct cmdq_instruction inst = { {0} };
+ u32 clear_option = clear ? CMDQ_WFE_UPDATE : 0;
if (event >= CMDQ_MAX_EVENT)
return -EINVAL;
inst.op = CMDQ_CODE_WFE;
- inst.value = CMDQ_WFE_OPTION;
+ inst.value = CMDQ_WFE_OPTION | clear_option;
inst.event = event;
return cmdq_pkt_append_command(pkt, inst);
@@ -315,6 +409,18 @@ int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value)
}
EXPORT_SYMBOL(cmdq_pkt_assign);
+int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr)
+{
+ struct cmdq_instruction inst = {};
+
+ inst.op = CMDQ_CODE_JUMP;
+ inst.offset = CMDQ_JUMP_RELATIVE;
+ inst.value = addr >>
+ cmdq_get_shift_pa(((struct cmdq_client *)pkt->cl)->chan);
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_jump);
+
int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
{
struct cmdq_instruction inst = { {0} };
@@ -329,7 +435,8 @@ int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
/* JUMP to end */
inst.op = CMDQ_CODE_JUMP;
- inst.value = CMDQ_JUMP_PASS;
+ inst.value = CMDQ_JUMP_PASS >>
+ cmdq_get_shift_pa(((struct cmdq_client *)pkt->cl)->chan);
err = cmdq_pkt_append_command(pkt, inst);
return err;
diff --git a/drivers/soc/mediatek/mtk-infracfg.c b/drivers/soc/mediatek/mtk-infracfg.c
index 341c7ac..4a12379 100644
--- a/drivers/soc/mediatek/mtk-infracfg.c
+++ b/drivers/soc/mediatek/mtk-infracfg.c
@@ -19,7 +19,7 @@
/**
* mtk_infracfg_set_bus_protection - enable bus protection
- * @regmap: The infracfg regmap
+ * @infracfg: The infracfg regmap
* @mask: The mask containing the protection bits to be enabled.
* @reg_update: The boolean flag determines to set the protection bits
* by regmap_update_bits with enable register(PROTECTEN) or
@@ -50,7 +50,7 @@ int mtk_infracfg_set_bus_protection(struct regmap *infracfg, u32 mask,
/**
* mtk_infracfg_clear_bus_protection - disable bus protection
- * @regmap: The infracfg regmap
+ * @infracfg: The infracfg regmap
* @mask: The mask containing the protection bits to be disabled.
* @reg_update: The boolean flag determines to clear the protection bits
* by regmap_update_bits with enable register(PROTECTEN) or
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 3dc3e3d..6a3b69b 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -26,6 +26,22 @@
resource on a RPM-hardened platform must use this database to get
SoC specific identifier and information for the shared resources.
+config QCOM_CPR
+ tristate "QCOM Core Power Reduction (CPR) support"
+ depends on ARCH_QCOM && HAS_IOMEM
+ select PM_OPP
+ select REGMAP
+ help
+ Say Y here to enable support for the CPR hardware found on Qualcomm
+ SoCs like QCS404.
+
+ This driver populates CPU OPPs tables and makes adjustments to the
+ tables based on feedback from the CPR hardware. If you want to do
+ CPUfrequency scaling say Y here.
+
+ To compile this driver as a module, choose M here: the module will
+ be called qcom-cpr
+
config QCOM_GENI_SE
tristate "QCOM GENI Serial Engine Driver"
depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 93392d9..ad675a6 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -3,6 +3,7 @@
obj-$(CONFIG_QCOM_AOSS_QMP) += qcom_aoss.o
obj-$(CONFIG_QCOM_GENI_SE) += qcom-geni-se.o
obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
+obj-$(CONFIG_QCOM_CPR) += cpr.o
obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
obj-$(CONFIG_QCOM_MDT_LOADER) += mdt_loader.o
obj-$(CONFIG_QCOM_OCMEM) += ocmem.o
diff --git a/drivers/soc/qcom/apr.c b/drivers/soc/qcom/apr.c
index 1f35b09..7abfc8c 100644
--- a/drivers/soc/qcom/apr.c
+++ b/drivers/soc/qcom/apr.c
@@ -328,7 +328,7 @@ static int of_apr_add_pd_lookups(struct device *dev)
pds = pdr_add_lookup(apr->pdr, service_name, service_path);
if (IS_ERR(pds) && PTR_ERR(pds) != -EALREADY) {
- dev_err(dev, "pdr add lookup failed: %d\n", ret);
+ dev_err(dev, "pdr add lookup failed: %ld\n", PTR_ERR(pds));
return PTR_ERR(pds);
}
}
diff --git a/drivers/power/avs/qcom-cpr.c b/drivers/soc/qcom/cpr.c
similarity index 100%
rename from drivers/power/avs/qcom-cpr.c
rename to drivers/soc/qcom/cpr.c
diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
index 429b5a6..70fbe70 100644
--- a/drivers/soc/qcom/llcc-qcom.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -387,7 +387,6 @@ static int qcom_llcc_remove(struct platform_device *pdev)
static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev,
const char *name)
{
- struct resource *res;
void __iomem *base;
struct regmap_config llcc_regmap_config = {
.reg_bits = 32,
@@ -396,11 +395,7 @@ static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev,
.fast_io = true,
};
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
- if (!res)
- return ERR_PTR(-ENODEV);
-
- base = devm_ioremap_resource(&pdev->dev, res);
+ base = devm_platform_ioremap_resource_byname(pdev, name);
if (IS_ERR(base))
return ERR_CAST(base);
diff --git a/drivers/soc/qcom/pdr_internal.h b/drivers/soc/qcom/pdr_internal.h
index 15b5002..ab9ae8c 100644
--- a/drivers/soc/qcom/pdr_internal.h
+++ b/drivers/soc/qcom/pdr_internal.h
@@ -185,7 +185,7 @@ struct qmi_elem_info servreg_get_domain_list_resp_ei[] = {
.data_type = QMI_STRUCT,
.elem_len = SERVREG_DOMAIN_LIST_LENGTH,
.elem_size = sizeof(struct servreg_location_entry),
- .array_type = NO_ARRAY,
+ .array_type = VAR_LEN_ARRAY,
.tlv_type = 0x12,
.offset = offsetof(struct servreg_get_domain_list_resp,
domain_list),
diff --git a/drivers/soc/qcom/rpmh-internal.h b/drivers/soc/qcom/rpmh-internal.h
index ef60e79..344ba68 100644
--- a/drivers/soc/qcom/rpmh-internal.h
+++ b/drivers/soc/qcom/rpmh-internal.h
@@ -8,6 +8,7 @@
#define __RPM_INTERNAL_H__
#include <linux/bitmap.h>
+#include <linux/wait.h>
#include <soc/qcom/tcs.h>
#define TCS_TYPE_NR 4
@@ -106,6 +107,8 @@ struct rpmh_ctrlr {
* @lock: Synchronize state of the controller. If RPMH's cache
* lock will also be held, the order is: drv->lock then
* cache_lock.
+ * @tcs_wait: Wait queue used to wait for @tcs_in_use to free up a
+ * slot
* @client: Handle to the DRV's client.
*/
struct rsc_drv {
@@ -118,6 +121,7 @@ struct rsc_drv {
struct tcs_group tcs[TCS_TYPE_NR];
DECLARE_BITMAP(tcs_in_use, MAX_TCS_NR);
spinlock_t lock;
+ wait_queue_head_t tcs_wait;
struct rpmh_ctrlr client;
};
diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index ae66757..a297911 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
+#include <linux/wait.h>
#include <soc/qcom/cmd-db.h>
#include <soc/qcom/tcs.h>
@@ -453,6 +454,7 @@ static irqreturn_t tcs_tx_done(int irq, void *p)
if (!drv->tcs[ACTIVE_TCS].num_tcs)
enable_tcs_irq(drv, i, false);
spin_unlock(&drv->lock);
+ wake_up(&drv->tcs_wait);
if (req)
rpmh_tx_done(req, err);
}
@@ -571,43 +573,74 @@ static int find_free_tcs(struct tcs_group *tcs)
}
/**
- * tcs_write() - Store messages into a TCS right now, or return -EBUSY.
+ * claim_tcs_for_req() - Claim a tcs in the given tcs_group; only for active.
* @drv: The controller.
+ * @tcs: The tcs_group used for ACTIVE_ONLY transfers.
* @msg: The data to be sent.
*
- * Grabs a TCS for ACTIVE_ONLY transfers and writes the messages to it.
+ * Claims a tcs in the given tcs_group while making sure that no existing cmd
+ * is in flight that would conflict with the one in @msg.
*
- * If there are no free TCSes for ACTIVE_ONLY transfers or if a command for
- * the same address is already transferring returns -EBUSY which means the
- * client should retry shortly.
+ * Context: Must be called with the drv->lock held since that protects
+ * tcs_in_use.
*
- * Return: 0 on success, -EBUSY if client should retry, or an error.
- * Client should have interrupts enabled for a bit before retrying.
+ * Return: The id of the claimed tcs or -EBUSY if a matching msg is in flight
+ * or the tcs_group is full.
*/
-static int tcs_write(struct rsc_drv *drv, const struct tcs_request *msg)
+static int claim_tcs_for_req(struct rsc_drv *drv, struct tcs_group *tcs,
+ const struct tcs_request *msg)
{
- struct tcs_group *tcs;
- int tcs_id;
- unsigned long flags;
int ret;
- tcs = get_tcs_for_msg(drv, msg);
- if (IS_ERR(tcs))
- return PTR_ERR(tcs);
-
- spin_lock_irqsave(&drv->lock, flags);
/*
* The h/w does not like if we send a request to the same address,
* when one is already in-flight or being processed.
*/
ret = check_for_req_inflight(drv, tcs, msg);
if (ret)
- goto unlock;
+ return ret;
- ret = find_free_tcs(tcs);
- if (ret < 0)
- goto unlock;
- tcs_id = ret;
+ return find_free_tcs(tcs);
+}
+
+/**
+ * rpmh_rsc_send_data() - Write / trigger active-only message.
+ * @drv: The controller.
+ * @msg: The data to be sent.
+ *
+ * NOTES:
+ * - This is only used for "ACTIVE_ONLY" since the limitations of this
+ * function don't make sense for sleep/wake cases.
+ * - To do the transfer, we will grab a whole TCS for ourselves--we don't
+ * try to share. If there are none available we'll wait indefinitely
+ * for a free one.
+ * - This function will not wait for the commands to be finished, only for
+ * data to be programmed into the RPMh. See rpmh_tx_done() which will
+ * be called when the transfer is fully complete.
+ * - This function must be called with interrupts enabled. If the hardware
+ * is busy doing someone else's transfer we need that transfer to fully
+ * finish so that we can have the hardware, and to fully finish it needs
+ * the interrupt handler to run. If the interrupts is set to run on the
+ * active CPU this can never happen if interrupts are disabled.
+ *
+ * Return: 0 on success, -EINVAL on error.
+ */
+int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg)
+{
+ struct tcs_group *tcs;
+ int tcs_id;
+ unsigned long flags;
+
+ tcs = get_tcs_for_msg(drv, msg);
+ if (IS_ERR(tcs))
+ return PTR_ERR(tcs);
+
+ spin_lock_irqsave(&drv->lock, flags);
+
+ /* Wait forever for a free tcs. It better be there eventually! */
+ wait_event_lock_irq(drv->tcs_wait,
+ (tcs_id = claim_tcs_for_req(drv, tcs, msg)) >= 0,
+ drv->lock);
tcs->req[tcs_id - tcs->offset] = msg;
set_bit(tcs_id, drv->tcs_in_use);
@@ -635,47 +668,6 @@ static int tcs_write(struct rsc_drv *drv, const struct tcs_request *msg)
__tcs_set_trigger(drv, tcs_id, true);
return 0;
-unlock:
- spin_unlock_irqrestore(&drv->lock, flags);
- return ret;
-}
-
-/**
- * rpmh_rsc_send_data() - Write / trigger active-only message.
- * @drv: The controller.
- * @msg: The data to be sent.
- *
- * NOTES:
- * - This is only used for "ACTIVE_ONLY" since the limitations of this
- * function don't make sense for sleep/wake cases.
- * - To do the transfer, we will grab a whole TCS for ourselves--we don't
- * try to share. If there are none available we'll wait indefinitely
- * for a free one.
- * - This function will not wait for the commands to be finished, only for
- * data to be programmed into the RPMh. See rpmh_tx_done() which will
- * be called when the transfer is fully complete.
- * - This function must be called with interrupts enabled. If the hardware
- * is busy doing someone else's transfer we need that transfer to fully
- * finish so that we can have the hardware, and to fully finish it needs
- * the interrupt handler to run. If the interrupts is set to run on the
- * active CPU this can never happen if interrupts are disabled.
- *
- * Return: 0 on success, -EINVAL on error.
- */
-int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg)
-{
- int ret;
-
- do {
- ret = tcs_write(drv, msg);
- if (ret == -EBUSY) {
- pr_info_ratelimited("TCS Busy, retrying RPMH message send: addr=%#x\n",
- msg->cmds[0].addr);
- udelay(10);
- }
- } while (ret == -EBUSY);
-
- return ret;
}
/**
@@ -983,6 +975,7 @@ static int rpmh_rsc_probe(struct platform_device *pdev)
return ret;
spin_lock_init(&drv->lock);
+ init_waitqueue_head(&drv->tcs_wait);
bitmap_zero(drv->tcs_in_use, MAX_TCS_NR);
irq = platform_get_irq(pdev, drv->id);
diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
index b25d0f7..b44ede4 100644
--- a/drivers/soc/qcom/socinfo.c
+++ b/drivers/soc/qcom/socinfo.c
@@ -194,6 +194,7 @@ static const struct soc_id soc_id[] = {
{ 186, "MSM8674" },
{ 194, "MSM8974PRO" },
{ 206, "MSM8916" },
+ { 207, "MSM8994" },
{ 208, "APQ8074-AA" },
{ 209, "APQ8074-AB" },
{ 210, "APQ8074PRO" },
@@ -214,6 +215,8 @@ static const struct soc_id soc_id[] = {
{ 248, "MSM8216" },
{ 249, "MSM8116" },
{ 250, "MSM8616" },
+ { 251, "MSM8992" },
+ { 253, "APQ8094" },
{ 291, "APQ8096" },
{ 305, "MSM8996SG" },
{ 310, "MSM8996AU" },
@@ -223,6 +226,8 @@ static const struct soc_id soc_id[] = {
{ 321, "SDM845" },
{ 341, "SDA845" },
{ 356, "SM8250" },
+ { 402, "IPQ6018" },
+ { 425, "SC7180" },
};
static const char *socinfo_machine(struct device *dev, unsigned int id)
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 3098465..b70bbc3 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-config SOC_RENESAS
+menuconfig SOC_RENESAS
bool "Renesas SoC driver support" if COMPILE_TEST && !ARCH_RENESAS
default y if ARCH_RENESAS
select SOC_BUS
@@ -49,78 +49,18 @@
#comment "Renesas ARM SoCs System Type"
config ARCH_EMEV2
- bool "Emma Mobile EV2"
+ bool "ARM32 Platform support for Emma Mobile EV2"
select HAVE_ARM_SCU if SMP
select SYS_SUPPORTS_EM_STI
-config ARCH_R7S72100
- bool "RZ/A1H (R7S72100)"
- select ARM_ERRATA_754322
- select PM
- select PM_GENERIC_DOMAINS
- select RENESAS_OSTM
- select RENESAS_RZA1_IRQC
- select SYS_SUPPORTS_SH_MTU2
-
-config ARCH_R7S9210
- bool "RZ/A2 (R7S9210)"
- select PM
- select PM_GENERIC_DOMAINS
- select RENESAS_OSTM
- select RENESAS_RZA1_IRQC
-
-config ARCH_R8A73A4
- bool "R-Mobile APE6 (R8A73A40)"
- select ARCH_RMOBILE
- select ARM_ERRATA_798181 if SMP
- select ARM_ERRATA_814220
- select HAVE_ARM_ARCH_TIMER
- select RENESAS_IRQC
-
-config ARCH_R8A7740
- bool "R-Mobile A1 (R8A77400)"
- select ARCH_RMOBILE
- select ARM_ERRATA_754322
- select RENESAS_INTC_IRQPIN
-
-config ARCH_R8A7742
- bool "RZ/G1H (R8A77420)"
- select ARCH_RCAR_GEN2
- select ARM_ERRATA_798181 if SMP
- select ARM_ERRATA_814220
- select SYSC_R8A7742
-
-config ARCH_R8A7743
- bool "RZ/G1M (R8A77430)"
- select ARCH_RCAR_GEN2
- select ARM_ERRATA_798181 if SMP
- select SYSC_R8A7743
-
-config ARCH_R8A7744
- bool "RZ/G1N (R8A77440)"
- select ARCH_RCAR_GEN2
- select ARM_ERRATA_798181 if SMP
- select SYSC_R8A7743
-
-config ARCH_R8A7745
- bool "RZ/G1E (R8A77450)"
+config ARCH_R8A7794
+ bool "ARM32 Platform support for R-Car E2"
select ARCH_RCAR_GEN2
select ARM_ERRATA_814220
- select SYSC_R8A7745
-
-config ARCH_R8A77470
- bool "RZ/G1C (R8A77470)"
- select ARCH_RCAR_GEN2
- select ARM_ERRATA_814220
- select SYSC_R8A77470
-
-config ARCH_R8A7778
- bool "R-Car M1A (R8A77781)"
- select ARCH_RCAR_GEN1
- select ARM_ERRATA_754322
+ select SYSC_R8A7794
config ARCH_R8A7779
- bool "R-Car H1 (R8A77790)"
+ bool "ARM32 Platform support for R-Car H1"
select ARCH_RCAR_GEN1
select ARM_ERRATA_754322
select ARM_GLOBAL_TIMER
@@ -129,46 +69,106 @@
select SYSC_R8A7779
config ARCH_R8A7790
- bool "R-Car H2 (R8A77900)"
+ bool "ARM32 Platform support for R-Car H2"
select ARCH_RCAR_GEN2
select ARM_ERRATA_798181 if SMP
select ARM_ERRATA_814220
select I2C
select SYSC_R8A7790
+config ARCH_R8A7778
+ bool "ARM32 Platform support for R-Car M1A"
+ select ARCH_RCAR_GEN1
+ select ARM_ERRATA_754322
+
+config ARCH_R8A7793
+ bool "ARM32 Platform support for R-Car M2-N"
+ select ARCH_RCAR_GEN2
+ select ARM_ERRATA_798181 if SMP
+ select I2C
+ select SYSC_R8A7791
+
config ARCH_R8A7791
- bool "R-Car M2-W (R8A77910)"
+ bool "ARM32 Platform support for R-Car M2-W"
select ARCH_RCAR_GEN2
select ARM_ERRATA_798181 if SMP
select I2C
select SYSC_R8A7791
config ARCH_R8A7792
- bool "R-Car V2H (R8A77920)"
+ bool "ARM32 Platform support for R-Car V2H"
select ARCH_RCAR_GEN2
select ARM_ERRATA_798181 if SMP
select SYSC_R8A7792
-config ARCH_R8A7793
- bool "R-Car M2-N (R8A7793)"
- select ARCH_RCAR_GEN2
- select ARM_ERRATA_798181 if SMP
- select I2C
- select SYSC_R8A7791
+config ARCH_R8A7740
+ bool "ARM32 Platform support for R-Mobile A1"
+ select ARCH_RMOBILE
+ select ARM_ERRATA_754322
+ select RENESAS_INTC_IRQPIN
-config ARCH_R8A7794
- bool "R-Car E2 (R8A77940)"
+config ARCH_R8A73A4
+ bool "ARM32 Platform support for R-Mobile APE6"
+ select ARCH_RMOBILE
+ select ARM_ERRATA_798181 if SMP
+ select ARM_ERRATA_814220
+ select HAVE_ARM_ARCH_TIMER
+ select RENESAS_IRQC
+
+config ARCH_R7S72100
+ bool "ARM32 Platform support for RZ/A1H"
+ select ARM_ERRATA_754322
+ select PM
+ select PM_GENERIC_DOMAINS
+ select RENESAS_OSTM
+ select RENESAS_RZA1_IRQC
+ select SYS_SUPPORTS_SH_MTU2
+
+config ARCH_R7S9210
+ bool "ARM32 Platform support for RZ/A2"
+ select PM
+ select PM_GENERIC_DOMAINS
+ select RENESAS_OSTM
+ select RENESAS_RZA1_IRQC
+
+config ARCH_R8A77470
+ bool "ARM32 Platform support for RZ/G1C"
select ARCH_RCAR_GEN2
select ARM_ERRATA_814220
- select SYSC_R8A7794
+ select SYSC_R8A77470
+
+config ARCH_R8A7745
+ bool "ARM32 Platform support for RZ/G1E"
+ select ARCH_RCAR_GEN2
+ select ARM_ERRATA_814220
+ select SYSC_R8A7745
+
+config ARCH_R8A7742
+ bool "ARM32 Platform support for RZ/G1H"
+ select ARCH_RCAR_GEN2
+ select ARM_ERRATA_798181 if SMP
+ select ARM_ERRATA_814220
+ select SYSC_R8A7742
+
+config ARCH_R8A7743
+ bool "ARM32 Platform support for RZ/G1M"
+ select ARCH_RCAR_GEN2
+ select ARM_ERRATA_798181 if SMP
+ select SYSC_R8A7743
+
+config ARCH_R8A7744
+ bool "ARM32 Platform support for RZ/G1N"
+ select ARCH_RCAR_GEN2
+ select ARM_ERRATA_798181 if SMP
+ select SYSC_R8A7743
config ARCH_R9A06G032
- bool "RZ/N1D (R9A06G032)"
+ bool "ARM32 Platform support for RZ/N1D"
select ARCH_RZN1
select ARM_ERRATA_814220
config ARCH_SH73A0
- bool "SH-Mobile AG5 (R8A73A00)"
+ bool "ARM32 Platform support for SH-Mobile AG5"
select ARCH_RMOBILE
select ARM_ERRATA_754322
select ARM_GLOBAL_TIMER
@@ -180,193 +180,201 @@
if ARM64
-config ARCH_R8A774A1
- bool "Renesas RZ/G2M SoC Platform"
+config ARCH_R8A77995
+ bool "ARM64 Platform support for R-Car D3"
select ARCH_RCAR_GEN3
- select SYSC_R8A774A1
+ select SYSC_R8A77995
help
- This enables support for the Renesas RZ/G2M SoC.
+ This enables support for the Renesas R-Car D3 SoC.
-config ARCH_R8A774B1
- bool "Renesas RZ/G2N SoC Platform"
+config ARCH_R8A77990
+ bool "ARM64 Platform support for R-Car E3"
select ARCH_RCAR_GEN3
- select SYSC_R8A774B1
+ select SYSC_R8A77990
help
- This enables support for the Renesas RZ/G2N SoC.
-
-config ARCH_R8A774C0
- bool "Renesas RZ/G2E SoC Platform"
- select ARCH_RCAR_GEN3
- select SYSC_R8A774C0
- help
- This enables support for the Renesas RZ/G2E SoC.
-
-config ARCH_R8A774E1
- bool "Renesas RZ/G2H SoC Platform"
- select ARCH_RCAR_GEN3
- select SYSC_R8A774E1
- help
- This enables support for the Renesas RZ/G2H SoC.
+ This enables support for the Renesas R-Car E3 SoC.
config ARCH_R8A77950
- bool "Renesas R-Car H3 ES1.x SoC Platform"
+ bool "ARM64 Platform support for R-Car H3 ES1.x"
select ARCH_RCAR_GEN3
select SYSC_R8A7795
help
This enables support for the Renesas R-Car H3 SoC (revision 1.x).
config ARCH_R8A77951
- bool "Renesas R-Car H3 ES2.0+ SoC Platform"
+ bool "ARM64 Platform support for R-Car H3 ES2.0+"
select ARCH_RCAR_GEN3
select SYSC_R8A7795
help
This enables support for the Renesas R-Car H3 SoC (revisions 2.0 and
later).
+config ARCH_R8A77965
+ bool "ARM64 Platform support for R-Car M3-N"
+ select ARCH_RCAR_GEN3
+ select SYSC_R8A77965
+ help
+ This enables support for the Renesas R-Car M3-N SoC.
+
config ARCH_R8A77960
- bool "Renesas R-Car M3-W SoC Platform"
+ bool "ARM64 Platform support for R-Car M3-W"
select ARCH_RCAR_GEN3
select SYSC_R8A77960
help
This enables support for the Renesas R-Car M3-W SoC.
config ARCH_R8A77961
- bool "Renesas R-Car M3-W+ SoC Platform"
+ bool "ARM64 Platform support for R-Car M3-W+"
select ARCH_RCAR_GEN3
select SYSC_R8A77961
help
This enables support for the Renesas R-Car M3-W+ SoC.
-config ARCH_R8A77965
- bool "Renesas R-Car M3-N SoC Platform"
- select ARCH_RCAR_GEN3
- select SYSC_R8A77965
- help
- This enables support for the Renesas R-Car M3-N SoC.
-
-config ARCH_R8A77970
- bool "Renesas R-Car V3M SoC Platform"
- select ARCH_RCAR_GEN3
- select SYSC_R8A77970
- help
- This enables support for the Renesas R-Car V3M SoC.
-
config ARCH_R8A77980
- bool "Renesas R-Car V3H SoC Platform"
+ bool "ARM64 Platform support for R-Car V3H"
select ARCH_RCAR_GEN3
select SYSC_R8A77980
help
This enables support for the Renesas R-Car V3H SoC.
-config ARCH_R8A77990
- bool "Renesas R-Car E3 SoC Platform"
+config ARCH_R8A77970
+ bool "ARM64 Platform support for R-Car V3M"
select ARCH_RCAR_GEN3
- select SYSC_R8A77990
+ select SYSC_R8A77970
help
- This enables support for the Renesas R-Car E3 SoC.
+ This enables support for the Renesas R-Car V3M SoC.
-config ARCH_R8A77995
- bool "Renesas R-Car D3 SoC Platform"
+config ARCH_R8A779A0
+ bool "ARM64 Platform support for R-Car V3U"
select ARCH_RCAR_GEN3
- select SYSC_R8A77995
+ select SYSC_R8A779A0
help
- This enables support for the Renesas R-Car D3 SoC.
+ This enables support for the Renesas R-Car V3U SoC.
+
+config ARCH_R8A774C0
+ bool "ARM64 Platform support for RZ/G2E"
+ select ARCH_RCAR_GEN3
+ select SYSC_R8A774C0
+ help
+ This enables support for the Renesas RZ/G2E SoC.
+
+config ARCH_R8A774E1
+ bool "ARM64 Platform support for RZ/G2H"
+ select ARCH_RCAR_GEN3
+ select SYSC_R8A774E1
+ help
+ This enables support for the Renesas RZ/G2H SoC.
+
+config ARCH_R8A774A1
+ bool "ARM64 Platform support for RZ/G2M"
+ select ARCH_RCAR_GEN3
+ select SYSC_R8A774A1
+ help
+ This enables support for the Renesas RZ/G2M SoC.
+
+config ARCH_R8A774B1
+ bool "ARM64 Platform support for RZ/G2N"
+ select ARCH_RCAR_GEN3
+ select SYSC_R8A774B1
+ help
+ This enables support for the Renesas RZ/G2N SoC.
endif # ARM64
-# SoC
-config SYSC_R8A7742
- bool "RZ/G1H System Controller support" if COMPILE_TEST
- select SYSC_RCAR
+config RST_RCAR
+ bool "Reset Controller support for R-Car" if COMPILE_TEST
-config SYSC_R8A7743
- bool "RZ/G1M System Controller support" if COMPILE_TEST
- select SYSC_RCAR
+config SYSC_RCAR
+ bool "System Controller support for R-Car" if COMPILE_TEST
-config SYSC_R8A7745
- bool "RZ/G1E System Controller support" if COMPILE_TEST
- select SYSC_RCAR
-
-config SYSC_R8A77470
- bool "RZ/G1C System Controller support" if COMPILE_TEST
- select SYSC_RCAR
-
-config SYSC_R8A774A1
- bool "RZ/G2M System Controller support" if COMPILE_TEST
- select SYSC_RCAR
-
-config SYSC_R8A774B1
- bool "RZ/G2N System Controller support" if COMPILE_TEST
- select SYSC_RCAR
-
-config SYSC_R8A774C0
- bool "RZ/G2E System Controller support" if COMPILE_TEST
- select SYSC_RCAR
-
-config SYSC_R8A774E1
- bool "RZ/G2H System Controller support" if COMPILE_TEST
- select SYSC_RCAR
-
-config SYSC_R8A7779
- bool "R-Car H1 System Controller support" if COMPILE_TEST
- select SYSC_RCAR
-
-config SYSC_R8A7790
- bool "R-Car H2 System Controller support" if COMPILE_TEST
- select SYSC_RCAR
-
-config SYSC_R8A7791
- bool "R-Car M2-W/N System Controller support" if COMPILE_TEST
- select SYSC_RCAR
-
-config SYSC_R8A7792
- bool "R-Car V2H System Controller support" if COMPILE_TEST
+config SYSC_R8A77995
+ bool "System Controller support for R-Car D3" if COMPILE_TEST
select SYSC_RCAR
config SYSC_R8A7794
- bool "R-Car E2 System Controller support" if COMPILE_TEST
- select SYSC_RCAR
-
-config SYSC_R8A7795
- bool "R-Car H3 System Controller support" if COMPILE_TEST
- select SYSC_RCAR
-
-config SYSC_R8A77960
- bool "R-Car M3-W System Controller support" if COMPILE_TEST
- select SYSC_RCAR
-
-config SYSC_R8A77961
- bool "R-Car M3-W+ System Controller support" if COMPILE_TEST
- select SYSC_RCAR
-
-config SYSC_R8A77965
- bool "R-Car M3-N System Controller support" if COMPILE_TEST
- select SYSC_RCAR
-
-config SYSC_R8A77970
- bool "R-Car V3M System Controller support" if COMPILE_TEST
- select SYSC_RCAR
-
-config SYSC_R8A77980
- bool "R-Car V3H System Controller support" if COMPILE_TEST
+ bool "System Controller support for R-Car E2" if COMPILE_TEST
select SYSC_RCAR
config SYSC_R8A77990
- bool "R-Car E3 System Controller support" if COMPILE_TEST
+ bool "System Controller support for R-Car E3" if COMPILE_TEST
select SYSC_RCAR
-config SYSC_R8A77995
- bool "R-Car D3 System Controller support" if COMPILE_TEST
+config SYSC_R8A7779
+ bool "System Controller support for R-Car H1" if COMPILE_TEST
select SYSC_RCAR
-# Family
-config RST_RCAR
- bool "R-Car Reset Controller support" if COMPILE_TEST
+config SYSC_R8A7790
+ bool "System Controller support for R-Car H2" if COMPILE_TEST
+ select SYSC_RCAR
-config SYSC_RCAR
- bool "R-Car System Controller support" if COMPILE_TEST
+config SYSC_R8A7795
+ bool "System Controller support for R-Car H3" if COMPILE_TEST
+ select SYSC_RCAR
+
+config SYSC_R8A7791
+ bool "System Controller support for R-Car M2-W/N" if COMPILE_TEST
+ select SYSC_RCAR
+
+config SYSC_R8A77965
+ bool "System Controller support for R-Car M3-N" if COMPILE_TEST
+ select SYSC_RCAR
+
+config SYSC_R8A77960
+ bool "System Controller support for R-Car M3-W" if COMPILE_TEST
+ select SYSC_RCAR
+
+config SYSC_R8A77961
+ bool "System Controller support for R-Car M3-W+" if COMPILE_TEST
+ select SYSC_RCAR
+
+config SYSC_R8A7792
+ bool "System Controller support for R-Car V2H" if COMPILE_TEST
+ select SYSC_RCAR
+
+config SYSC_R8A77980
+ bool "System Controller support for R-Car V3H" if COMPILE_TEST
+ select SYSC_RCAR
+
+config SYSC_R8A77970
+ bool "System Controller support for R-Car V3M" if COMPILE_TEST
+ select SYSC_RCAR
+
+config SYSC_R8A779A0
+ bool "System Controller support for R-Car V3U" if COMPILE_TEST
config SYSC_RMOBILE
- bool "R-Mobile System Controller support" if COMPILE_TEST
+ bool "System Controller support for R-Mobile" if COMPILE_TEST
+
+config SYSC_R8A77470
+ bool "System Controller support for RZ/G1C" if COMPILE_TEST
+ select SYSC_RCAR
+
+config SYSC_R8A7745
+ bool "System Controller support for RZ/G1E" if COMPILE_TEST
+ select SYSC_RCAR
+
+config SYSC_R8A7742
+ bool "System Controller support for RZ/G1H" if COMPILE_TEST
+ select SYSC_RCAR
+
+config SYSC_R8A7743
+ bool "System Controller support for RZ/G1M" if COMPILE_TEST
+ select SYSC_RCAR
+
+config SYSC_R8A774C0
+ bool "System Controller support for RZ/G2E" if COMPILE_TEST
+ select SYSC_RCAR
+
+config SYSC_R8A774E1
+ bool "System Controller support for RZ/G2H" if COMPILE_TEST
+ select SYSC_RCAR
+
+config SYSC_R8A774A1
+ bool "System Controller support for RZ/G2M" if COMPILE_TEST
+ select SYSC_RCAR
+
+config SYSC_R8A774B1
+ bool "System Controller support for RZ/G2N" if COMPILE_TEST
+ select SYSC_RCAR
endif # SOC_RENESAS
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index 10a399f..9b29bed 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -24,6 +24,7 @@
obj-$(CONFIG_SYSC_R8A77980) += r8a77980-sysc.o
obj-$(CONFIG_SYSC_R8A77990) += r8a77990-sysc.o
obj-$(CONFIG_SYSC_R8A77995) += r8a77995-sysc.o
+obj-$(CONFIG_SYSC_R8A779A0) += r8a779a0-sysc.o
ifdef CONFIG_SMP
obj-$(CONFIG_ARCH_R9A06G032) += r9a06g032-smp.o
endif
diff --git a/drivers/soc/renesas/r8a779a0-sysc.c b/drivers/soc/renesas/r8a779a0-sysc.c
new file mode 100644
index 0000000..d464ffa
--- /dev/null
+++ b/drivers/soc/renesas/r8a779a0-sysc.c
@@ -0,0 +1,448 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Car V3U System Controller
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <linux/bits.h>
+#include <linux/clk/renesas.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/of_address.h>
+#include <linux/pm_domain.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <dt-bindings/power/r8a779a0-sysc.h>
+
+/*
+ * Power Domain flags
+ */
+#define PD_CPU BIT(0) /* Area contains main CPU core */
+#define PD_SCU BIT(1) /* Area contains SCU and L2 cache */
+#define PD_NO_CR BIT(2) /* Area lacks PWR{ON,OFF}CR registers */
+
+#define PD_CPU_NOCR PD_CPU | PD_NO_CR /* CPU area lacks CR */
+#define PD_ALWAYS_ON PD_NO_CR /* Always-on area */
+
+/*
+ * Description of a Power Area
+ */
+struct r8a779a0_sysc_area {
+ const char *name;
+ u8 pdr; /* PDRn */
+ int parent; /* -1 if none */
+ unsigned int flags; /* See PD_* */
+};
+
+/*
+ * SoC-specific Power Area Description
+ */
+struct r8a779a0_sysc_info {
+ const struct r8a779a0_sysc_area *areas;
+ unsigned int num_areas;
+};
+
+static struct r8a779a0_sysc_area r8a779a0_areas[] __initdata = {
+ { "always-on", R8A779A0_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
+ { "a3e0", R8A779A0_PD_A3E0, R8A779A0_PD_ALWAYS_ON, PD_SCU },
+ { "a3e1", R8A779A0_PD_A3E1, R8A779A0_PD_ALWAYS_ON, PD_SCU },
+ { "a2e0d0", R8A779A0_PD_A2E0D0, R8A779A0_PD_A3E0, PD_SCU },
+ { "a2e0d1", R8A779A0_PD_A2E0D1, R8A779A0_PD_A3E0, PD_SCU },
+ { "a2e1d0", R8A779A0_PD_A2E1D0, R8A779A0_PD_A3E1, PD_SCU },
+ { "a2e1d1", R8A779A0_PD_A2E1D1, R8A779A0_PD_A3E1, PD_SCU },
+ { "a1e0d0c0", R8A779A0_PD_A1E0D0C0, R8A779A0_PD_A2E0D0, PD_CPU_NOCR },
+ { "a1e0d0c1", R8A779A0_PD_A1E0D0C1, R8A779A0_PD_A2E0D0, PD_CPU_NOCR },
+ { "a1e0d1c0", R8A779A0_PD_A1E0D1C0, R8A779A0_PD_A2E0D1, PD_CPU_NOCR },
+ { "a1e0d1c1", R8A779A0_PD_A1E0D1C1, R8A779A0_PD_A2E0D1, PD_CPU_NOCR },
+ { "a1e1d0c0", R8A779A0_PD_A1E1D0C0, R8A779A0_PD_A2E1D0, PD_CPU_NOCR },
+ { "a1e1d0c1", R8A779A0_PD_A1E1D0C1, R8A779A0_PD_A2E1D0, PD_CPU_NOCR },
+ { "a1e1d1c0", R8A779A0_PD_A1E1D1C0, R8A779A0_PD_A2E1D1, PD_CPU_NOCR },
+ { "a1e1d1c1", R8A779A0_PD_A1E1D1C1, R8A779A0_PD_A2E1D1, PD_CPU_NOCR },
+ { "3dg-a", R8A779A0_PD_3DG_A, R8A779A0_PD_ALWAYS_ON },
+ { "3dg-b", R8A779A0_PD_3DG_B, R8A779A0_PD_3DG_A },
+ { "a3vip0", R8A779A0_PD_A3VIP0, R8A779A0_PD_ALWAYS_ON },
+ { "a3vip1", R8A779A0_PD_A3VIP1, R8A779A0_PD_ALWAYS_ON },
+ { "a3vip3", R8A779A0_PD_A3VIP3, R8A779A0_PD_ALWAYS_ON },
+ { "a3vip2", R8A779A0_PD_A3VIP2, R8A779A0_PD_ALWAYS_ON },
+ { "a3isp01", R8A779A0_PD_A3ISP01, R8A779A0_PD_ALWAYS_ON },
+ { "a3isp23", R8A779A0_PD_A3ISP23, R8A779A0_PD_ALWAYS_ON },
+ { "a3ir", R8A779A0_PD_A3IR, R8A779A0_PD_ALWAYS_ON },
+ { "a2cn0", R8A779A0_PD_A2CN0, R8A779A0_PD_A3IR },
+ { "a2imp01", R8A779A0_PD_A2IMP01, R8A779A0_PD_A3IR },
+ { "a2dp0", R8A779A0_PD_A2DP0, R8A779A0_PD_A3IR },
+ { "a2cv0", R8A779A0_PD_A2CV0, R8A779A0_PD_A3IR },
+ { "a2cv1", R8A779A0_PD_A2CV1, R8A779A0_PD_A3IR },
+ { "a2cv4", R8A779A0_PD_A2CV4, R8A779A0_PD_A3IR },
+ { "a2cv6", R8A779A0_PD_A2CV6, R8A779A0_PD_A3IR },
+ { "a2cn2", R8A779A0_PD_A2CN2, R8A779A0_PD_A3IR },
+ { "a2imp23", R8A779A0_PD_A2IMP23, R8A779A0_PD_A3IR },
+ { "a2dp1", R8A779A0_PD_A2DP0, R8A779A0_PD_A3IR },
+ { "a2cv2", R8A779A0_PD_A2CV0, R8A779A0_PD_A3IR },
+ { "a2cv3", R8A779A0_PD_A2CV1, R8A779A0_PD_A3IR },
+ { "a2cv5", R8A779A0_PD_A2CV4, R8A779A0_PD_A3IR },
+ { "a2cv7", R8A779A0_PD_A2CV6, R8A779A0_PD_A3IR },
+ { "a2cn1", R8A779A0_PD_A2CN1, R8A779A0_PD_A3IR },
+ { "a1cnn0", R8A779A0_PD_A1CNN0, R8A779A0_PD_A2CN0 },
+ { "a1cnn2", R8A779A0_PD_A1CNN2, R8A779A0_PD_A2CN2 },
+ { "a1dsp0", R8A779A0_PD_A1DSP0, R8A779A0_PD_A2CN2 },
+ { "a1cnn1", R8A779A0_PD_A1CNN1, R8A779A0_PD_A2CN1 },
+ { "a1dsp1", R8A779A0_PD_A1DSP1, R8A779A0_PD_A2CN1 },
+};
+
+static const struct r8a779a0_sysc_info r8a779a0_sysc_info __initconst = {
+ .areas = r8a779a0_areas,
+ .num_areas = ARRAY_SIZE(r8a779a0_areas),
+};
+
+/* SYSC Common */
+#define SYSCSR 0x000 /* SYSC Status Register */
+#define SYSCPONSR(x) (0x800 + ((x) * 0x4)) /* Power-ON Status Register 0 */
+#define SYSCPOFFSR(x) (0x808 + ((x) * 0x4)) /* Power-OFF Status Register */
+#define SYSCISCR(x) (0x810 + ((x) * 0x4)) /* Interrupt Status/Clear Register */
+#define SYSCIER(x) (0x820 + ((x) * 0x4)) /* Interrupt Enable Register */
+#define SYSCIMR(x) (0x830 + ((x) * 0x4)) /* Interrupt Mask Register */
+
+/* Power Domain Registers */
+#define PDRSR(n) (0x1000 + ((n) * 0x40))
+#define PDRONCR(n) (0x1004 + ((n) * 0x40))
+#define PDROFFCR(n) (0x1008 + ((n) * 0x40))
+#define PDRESR(n) (0x100C + ((n) * 0x40))
+
+/* PWRON/PWROFF */
+#define PWRON_PWROFF BIT(0) /* Power-ON/OFF request */
+
+/* PDRESR */
+#define PDRESR_ERR BIT(0)
+
+/* PDRSR */
+#define PDRSR_OFF BIT(0) /* Power-OFF state */
+#define PDRSR_ON BIT(4) /* Power-ON state */
+#define PDRSR_OFF_STATE BIT(8) /* Processing Power-OFF sequence */
+#define PDRSR_ON_STATE BIT(12) /* Processing Power-ON sequence */
+
+#define SYSCSR_BUSY GENMASK(1, 0) /* All bit sets is not busy */
+
+#define SYSCSR_TIMEOUT 10000
+#define SYSCSR_DELAY_US 10
+
+#define PDRESR_RETRIES 1000
+#define PDRESR_DELAY_US 10
+
+#define SYSCISR_TIMEOUT 10000
+#define SYSCISR_DELAY_US 10
+
+#define NUM_DOMAINS_EACH_REG BITS_PER_TYPE(u32)
+
+static void __iomem *r8a779a0_sysc_base;
+static DEFINE_SPINLOCK(r8a779a0_sysc_lock); /* SMP CPUs + I/O devices */
+
+static int r8a779a0_sysc_pwr_on_off(u8 pdr, bool on)
+{
+ unsigned int reg_offs;
+ u32 val;
+ int ret;
+
+ if (on)
+ reg_offs = PDRONCR(pdr);
+ else
+ reg_offs = PDROFFCR(pdr);
+
+ /* Wait until SYSC is ready to accept a power request */
+ ret = readl_poll_timeout_atomic(r8a779a0_sysc_base + SYSCSR, val,
+ (val & SYSCSR_BUSY) == SYSCSR_BUSY,
+ SYSCSR_DELAY_US, SYSCSR_TIMEOUT);
+ if (ret < 0)
+ return -EAGAIN;
+
+ /* Submit power shutoff or power resume request */
+ iowrite32(PWRON_PWROFF, r8a779a0_sysc_base + reg_offs);
+
+ return 0;
+}
+
+static int clear_irq_flags(unsigned int reg_idx, unsigned int isr_mask)
+{
+ u32 val;
+ int ret;
+
+ iowrite32(isr_mask, r8a779a0_sysc_base + SYSCISCR(reg_idx));
+
+ ret = readl_poll_timeout_atomic(r8a779a0_sysc_base + SYSCISCR(reg_idx),
+ val, !(val & isr_mask),
+ SYSCISR_DELAY_US, SYSCISR_TIMEOUT);
+ if (ret < 0) {
+ pr_err("\n %s : Can not clear IRQ flags in SYSCISCR", __func__);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int r8a779a0_sysc_power(u8 pdr, bool on)
+{
+ unsigned int isr_mask;
+ unsigned int reg_idx, bit_idx;
+ unsigned int status;
+ unsigned long flags;
+ int ret = 0;
+ u32 val;
+ int k;
+
+ spin_lock_irqsave(&r8a779a0_sysc_lock, flags);
+
+ reg_idx = pdr / NUM_DOMAINS_EACH_REG;
+ bit_idx = pdr % NUM_DOMAINS_EACH_REG;
+
+ isr_mask = BIT(bit_idx);
+
+ /*
+ * The interrupt source needs to be enabled, but masked, to prevent the
+ * CPU from receiving it.
+ */
+ iowrite32(ioread32(r8a779a0_sysc_base + SYSCIER(reg_idx)) | isr_mask,
+ r8a779a0_sysc_base + SYSCIER(reg_idx));
+ iowrite32(ioread32(r8a779a0_sysc_base + SYSCIMR(reg_idx)) | isr_mask,
+ r8a779a0_sysc_base + SYSCIMR(reg_idx));
+
+ ret = clear_irq_flags(reg_idx, isr_mask);
+ if (ret)
+ goto out;
+
+ /* Submit power shutoff or resume request until it was accepted */
+ for (k = 0; k < PDRESR_RETRIES; k++) {
+ ret = r8a779a0_sysc_pwr_on_off(pdr, on);
+ if (ret)
+ goto out;
+
+ status = ioread32(r8a779a0_sysc_base + PDRESR(pdr));
+ if (!(status & PDRESR_ERR))
+ break;
+
+ udelay(PDRESR_DELAY_US);
+ }
+
+ if (k == PDRESR_RETRIES) {
+ ret = -EIO;
+ goto out;
+ }
+
+ /* Wait until the power shutoff or resume request has completed * */
+ ret = readl_poll_timeout_atomic(r8a779a0_sysc_base + SYSCISCR(reg_idx),
+ val, (val & isr_mask),
+ SYSCISR_DELAY_US, SYSCISR_TIMEOUT);
+ if (ret < 0) {
+ ret = -EIO;
+ goto out;
+ }
+
+ /* Clear interrupt flags */
+ ret = clear_irq_flags(reg_idx, isr_mask);
+ if (ret)
+ goto out;
+
+ out:
+ spin_unlock_irqrestore(&r8a779a0_sysc_lock, flags);
+
+ pr_debug("sysc power %s domain %d: %08x -> %d\n", on ? "on" : "off",
+ pdr, ioread32(r8a779a0_sysc_base + SYSCISCR(reg_idx)), ret);
+ return ret;
+}
+
+static bool r8a779a0_sysc_power_is_off(u8 pdr)
+{
+ unsigned int st;
+
+ st = ioread32(r8a779a0_sysc_base + PDRSR(pdr));
+
+ if (st & PDRSR_OFF)
+ return true;
+
+ return false;
+}
+
+struct r8a779a0_sysc_pd {
+ struct generic_pm_domain genpd;
+ u8 pdr;
+ unsigned int flags;
+ char name[];
+};
+
+static inline struct r8a779a0_sysc_pd *to_r8a779a0_pd(struct generic_pm_domain *d)
+{
+ return container_of(d, struct r8a779a0_sysc_pd, genpd);
+}
+
+static int r8a779a0_sysc_pd_power_off(struct generic_pm_domain *genpd)
+{
+ struct r8a779a0_sysc_pd *pd = to_r8a779a0_pd(genpd);
+
+ pr_debug("%s: %s\n", __func__, genpd->name);
+ return r8a779a0_sysc_power(pd->pdr, false);
+}
+
+static int r8a779a0_sysc_pd_power_on(struct generic_pm_domain *genpd)
+{
+ struct r8a779a0_sysc_pd *pd = to_r8a779a0_pd(genpd);
+
+ pr_debug("%s: %s\n", __func__, genpd->name);
+ return r8a779a0_sysc_power(pd->pdr, true);
+}
+
+static int __init r8a779a0_sysc_pd_setup(struct r8a779a0_sysc_pd *pd)
+{
+ struct generic_pm_domain *genpd = &pd->genpd;
+ const char *name = pd->genpd.name;
+ int error;
+
+ if (pd->flags & PD_CPU) {
+ /*
+ * This domain contains a CPU core and therefore it should
+ * only be turned off if the CPU is not in use.
+ */
+ pr_debug("PM domain %s contains %s\n", name, "CPU");
+ genpd->flags |= GENPD_FLAG_ALWAYS_ON;
+ } else if (pd->flags & PD_SCU) {
+ /*
+ * This domain contains an SCU and cache-controller, and
+ * therefore it should only be turned off if the CPU cores are
+ * not in use.
+ */
+ pr_debug("PM domain %s contains %s\n", name, "SCU");
+ genpd->flags |= GENPD_FLAG_ALWAYS_ON;
+ } else if (pd->flags & PD_NO_CR) {
+ /*
+ * This domain cannot be turned off.
+ */
+ genpd->flags |= GENPD_FLAG_ALWAYS_ON;
+ }
+
+ if (!(pd->flags & (PD_CPU | PD_SCU))) {
+ /* Enable Clock Domain for I/O devices */
+ genpd->flags |= GENPD_FLAG_PM_CLK | GENPD_FLAG_ACTIVE_WAKEUP;
+ genpd->attach_dev = cpg_mssr_attach_dev;
+ genpd->detach_dev = cpg_mssr_detach_dev;
+ }
+
+ genpd->power_off = r8a779a0_sysc_pd_power_off;
+ genpd->power_on = r8a779a0_sysc_pd_power_on;
+
+ if (pd->flags & (PD_CPU | PD_NO_CR)) {
+ /* Skip CPUs (handled by SMP code) and areas without control */
+ pr_debug("%s: Not touching %s\n", __func__, genpd->name);
+ goto finalize;
+ }
+
+ if (!r8a779a0_sysc_power_is_off(pd->pdr)) {
+ pr_debug("%s: %s is already powered\n", __func__, genpd->name);
+ goto finalize;
+ }
+
+ r8a779a0_sysc_power(pd->pdr, true);
+
+finalize:
+ error = pm_genpd_init(genpd, &simple_qos_governor, false);
+ if (error)
+ pr_err("Failed to init PM domain %s: %d\n", name, error);
+
+ return error;
+}
+
+static const struct of_device_id r8a779a0_sysc_matches[] __initconst = {
+ { .compatible = "renesas,r8a779a0-sysc", .data = &r8a779a0_sysc_info },
+ { /* sentinel */ }
+};
+
+struct r8a779a0_pm_domains {
+ struct genpd_onecell_data onecell_data;
+ struct generic_pm_domain *domains[R8A779A0_PD_ALWAYS_ON + 1];
+};
+
+static struct genpd_onecell_data *r8a779a0_sysc_onecell_data;
+
+static int __init r8a779a0_sysc_pd_init(void)
+{
+ const struct r8a779a0_sysc_info *info;
+ const struct of_device_id *match;
+ struct r8a779a0_pm_domains *domains;
+ struct device_node *np;
+ void __iomem *base;
+ unsigned int i;
+ int error;
+
+ np = of_find_matching_node_and_match(NULL, r8a779a0_sysc_matches, &match);
+ if (!np)
+ return -ENODEV;
+
+ info = match->data;
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ pr_warn("%pOF: Cannot map regs\n", np);
+ error = -ENOMEM;
+ goto out_put;
+ }
+
+ r8a779a0_sysc_base = base;
+
+ domains = kzalloc(sizeof(*domains), GFP_KERNEL);
+ if (!domains) {
+ error = -ENOMEM;
+ goto out_put;
+ }
+
+ domains->onecell_data.domains = domains->domains;
+ domains->onecell_data.num_domains = ARRAY_SIZE(domains->domains);
+ r8a779a0_sysc_onecell_data = &domains->onecell_data;
+
+ for (i = 0; i < info->num_areas; i++) {
+ const struct r8a779a0_sysc_area *area = &info->areas[i];
+ struct r8a779a0_sysc_pd *pd;
+
+ if (!area->name) {
+ /* Skip NULLified area */
+ continue;
+ }
+
+ pd = kzalloc(sizeof(*pd) + strlen(area->name) + 1, GFP_KERNEL);
+ if (!pd) {
+ error = -ENOMEM;
+ goto out_put;
+ }
+
+ strcpy(pd->name, area->name);
+ pd->genpd.name = pd->name;
+ pd->pdr = area->pdr;
+ pd->flags = area->flags;
+
+ error = r8a779a0_sysc_pd_setup(pd);
+ if (error)
+ goto out_put;
+
+ domains->domains[area->pdr] = &pd->genpd;
+
+ if (area->parent < 0)
+ continue;
+
+ error = pm_genpd_add_subdomain(domains->domains[area->parent],
+ &pd->genpd);
+ if (error) {
+ pr_warn("Failed to add PM subdomain %s to parent %u\n",
+ area->name, area->parent);
+ goto out_put;
+ }
+ }
+
+ error = of_genpd_add_provider_onecell(np, &domains->onecell_data);
+
+out_put:
+ of_node_put(np);
+ return error;
+}
+early_initcall(r8a779a0_sysc_pd_init);
diff --git a/drivers/soc/renesas/rcar-rst.c b/drivers/soc/renesas/rcar-rst.c
index a932015..8a1e402 100644
--- a/drivers/soc/renesas/rcar-rst.c
+++ b/drivers/soc/renesas/rcar-rst.c
@@ -37,6 +37,10 @@ static const struct rst_config rcar_rst_gen3 __initconst = {
.modemr = 0x60,
};
+static const struct rst_config rcar_rst_r8a779a0 __initconst = {
+ .modemr = 0x00, /* MODEMR0 and it has CPG related bits */
+};
+
static const struct of_device_id rcar_rst_matches[] __initconst = {
/* RZ/G1 is handled like R-Car Gen2 */
{ .compatible = "renesas,r8a7742-rst", .data = &rcar_rst_gen2 },
@@ -67,6 +71,8 @@ static const struct of_device_id rcar_rst_matches[] __initconst = {
{ .compatible = "renesas,r8a77980-rst", .data = &rcar_rst_gen3 },
{ .compatible = "renesas,r8a77990-rst", .data = &rcar_rst_gen3 },
{ .compatible = "renesas,r8a77995-rst", .data = &rcar_rst_gen3 },
+ /* R-Car V3U */
+ { .compatible = "renesas,r8a779a0-rst", .data = &rcar_rst_r8a779a0 },
{ /* sentinel */ }
};
diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c
index f815a6a..0f8eff4 100644
--- a/drivers/soc/renesas/renesas-soc.c
+++ b/drivers/soc/renesas/renesas-soc.c
@@ -200,6 +200,11 @@ static const struct renesas_soc soc_rcar_d3 __initconst __maybe_unused = {
.id = 0x58,
};
+static const struct renesas_soc soc_rcar_v3u __initconst __maybe_unused = {
+ .family = &fam_rcar_gen3,
+ .id = 0x59,
+};
+
static const struct renesas_soc soc_shmobile_ag5 __initconst __maybe_unused = {
.family = &fam_shmobile,
.id = 0x37,
@@ -291,6 +296,9 @@ static const struct of_device_id renesas_socs[] __initconst = {
#ifdef CONFIG_ARCH_R8A77995
{ .compatible = "renesas,r8a77995", .data = &soc_rcar_d3 },
#endif
+#ifdef CONFIG_ARCH_R8A779A0
+ { .compatible = "renesas,r8a779a0", .data = &soc_rcar_v3u },
+#endif
#ifdef CONFIG_ARCH_SH73A0
{ .compatible = "renesas,sh73a0", .data = &soc_shmobile_ag5 },
#endif
diff --git a/drivers/soc/rockchip/Kconfig b/drivers/soc/rockchip/Kconfig
index b71b73b..2c13bf4 100644
--- a/drivers/soc/rockchip/Kconfig
+++ b/drivers/soc/rockchip/Kconfig
@@ -14,6 +14,14 @@
In a lot of cases there also need to be default settings initialized
to make some of them conform to expectations of the kernel.
+config ROCKCHIP_IODOMAIN
+ tristate "Rockchip IO domain support"
+ depends on OF
+ help
+ Say y here to enable support io domains on Rockchip SoCs. It is
+ necessary for the io domain setting of the SoC to match the
+ voltage supplied by the regulators.
+
config ROCKCHIP_PM_DOMAINS
bool "Rockchip generic power domain"
depends on PM
diff --git a/drivers/soc/rockchip/Makefile b/drivers/soc/rockchip/Makefile
index afca0a4..875032f 100644
--- a/drivers/soc/rockchip/Makefile
+++ b/drivers/soc/rockchip/Makefile
@@ -3,4 +3,5 @@
# Rockchip Soc drivers
#
obj-$(CONFIG_ROCKCHIP_GRF) += grf.o
+obj-$(CONFIG_ROCKCHIP_IODOMAIN) += io-domain.o
obj-$(CONFIG_ROCKCHIP_PM_DOMAINS) += pm_domains.o
diff --git a/drivers/power/avs/rockchip-io-domain.c b/drivers/soc/rockchip/io-domain.c
similarity index 100%
rename from drivers/power/avs/rockchip-io-domain.c
rename to drivers/soc/rockchip/io-domain.c
diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
index 2641856..fc7f48a 100644
--- a/drivers/soc/samsung/Kconfig
+++ b/drivers/soc/samsung/Kconfig
@@ -35,7 +35,54 @@
config EXYNOS_PM_DOMAINS
bool "Exynos PM domains" if COMPILE_TEST
- depends on PM_GENERIC_DOMAINS || COMPILE_TEST
+ depends on (ARCH_EXYNOS && PM_GENERIC_DOMAINS) || COMPILE_TEST
+
+config SAMSUNG_PM_DEBUG
+ bool "Samsung PM Suspend debug"
+ depends on PM && DEBUG_KERNEL
+ depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
+ depends on DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
+ depends on DEBUG_LL && MMU
+ help
+ Say Y here if you want verbose debugging from the PM Suspend and
+ Resume code. See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
+ for more information.
+
+config S3C_PM_DEBUG_LED_SMDK
+ bool "SMDK LED suspend/resume debugging"
+ depends on PM && (MACH_SMDK6410)
+ help
+ Say Y here to enable the use of the SMDK LEDs on the baseboard
+ for debugging of the state of the suspend and resume process.
+
+ Note, this currently only works for S3C64XX based SMDK boards.
+
+config SAMSUNG_PM_CHECK
+ bool "S3C2410 PM Suspend Memory CRC"
+ depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210)
+ select CRC32
+ help
+ Enable the PM code's memory area checksum over sleep. This option
+ will generate CRCs of all blocks of memory, and store them before
+ going to sleep. The blocks are then checked on resume for any
+ errors.
+
+ Note, this can take several seconds depending on memory size
+ and CPU speed.
+
+ See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
+
+config SAMSUNG_PM_CHECK_CHUNKSIZE
+ int "S3C2410 PM Suspend CRC Chunksize (KiB)"
+ depends on PM && SAMSUNG_PM_CHECK
+ default 64
+ help
+ Set the chunksize in Kilobytes of the CRC for checking memory
+ corruption over suspend and resume. A smaller value will mean that
+ the CRC data block will take more memory, but will identify any
+ faults with better precision.
+
+ See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
config EXYNOS_REGULATOR_COUPLER
bool "Exynos SoC Regulator Coupler" if COMPILE_TEST
diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile
index ecc3a32..59e8e94 100644
--- a/drivers/soc/samsung/Makefile
+++ b/drivers/soc/samsung/Makefile
@@ -10,3 +10,6 @@
exynos5250-pmu.o exynos5420-pmu.o
obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o
obj-$(CONFIG_EXYNOS_REGULATOR_COUPLER) += exynos-regulator-coupler.o
+
+obj-$(CONFIG_SAMSUNG_PM_CHECK) += s3c-pm-check.o
+obj-$(CONFIG_SAMSUNG_PM_DEBUG) += s3c-pm-debug.o
diff --git a/arch/arm/plat-samsung/pm-check.c b/drivers/soc/samsung/s3c-pm-check.c
similarity index 98%
rename from arch/arm/plat-samsung/pm-check.c
rename to drivers/soc/samsung/s3c-pm-check.c
index cd2c02c6..ff3e099 100644
--- a/arch/arm/plat-samsung/pm-check.c
+++ b/drivers/soc/samsung/s3c-pm-check.c
@@ -15,7 +15,7 @@
#include <linux/ioport.h>
#include <linux/slab.h>
-#include <plat/pm-common.h>
+#include <linux/soc/samsung/s3c-pm.h>
#if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1
#error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value
diff --git a/arch/arm/plat-samsung/pm-debug.c b/drivers/soc/samsung/s3c-pm-debug.c
similarity index 77%
rename from arch/arm/plat-samsung/pm-debug.c
rename to drivers/soc/samsung/s3c-pm-debug.c
index b76b1e9..b5ce0e9a4 100644
--- a/arch/arm/plat-samsung/pm-debug.c
+++ b/drivers/soc/samsung/s3c-pm-debug.c
@@ -15,17 +15,7 @@
#include <asm/mach/map.h>
-#include <plat/cpu.h>
-#include <plat/pm-common.h>
-
-#ifdef CONFIG_SAMSUNG_ATAGS
-#include <plat/pm.h>
-#include <mach/pm-core.h>
-#else
-static inline void s3c_pm_debug_init_uart(void) {}
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
- struct pm_uart_save *save) {}
-#endif
+#include <linux/soc/samsung/s3c-pm.h>
static struct pm_uart_save uart_save;
@@ -43,12 +33,6 @@ void s3c_pm_dbg(const char *fmt, ...)
printascii(buff);
}
-void s3c_pm_debug_init(void)
-{
- /* restart uart clocks so we can use them to output */
- s3c_pm_debug_init_uart();
-}
-
static inline void __iomem *s3c_pm_uart_base(void)
{
unsigned long paddr;
@@ -59,7 +43,7 @@ static inline void __iomem *s3c_pm_uart_base(void)
return (void __iomem *)vaddr;
}
-void s3c_pm_save_uarts(void)
+void s3c_pm_save_uarts(bool is_s3c2410)
{
void __iomem *regs = s3c_pm_uart_base();
struct pm_uart_save *save = &uart_save;
@@ -70,14 +54,14 @@ void s3c_pm_save_uarts(void)
save->umcon = __raw_readl(regs + S3C2410_UMCON);
save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
- if (!soc_is_s3c2410())
+ if (!is_s3c2410)
save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
S3C_PMDBG("UART[%p]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
regs, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
}
-void s3c_pm_restore_uarts(void)
+void s3c_pm_restore_uarts(bool is_s3c2410)
{
void __iomem *regs = s3c_pm_uart_base();
struct pm_uart_save *save = &uart_save;
@@ -90,6 +74,6 @@ void s3c_pm_restore_uarts(void)
__raw_writel(save->umcon, regs + S3C2410_UMCON);
__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
- if (!soc_is_s3c2410())
+ if (!is_s3c2410)
__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
}
diff --git a/drivers/soc/sunxi/sunxi_sram.c b/drivers/soc/sunxi/sunxi_sram.c
index 1b0d50f..d4c7bd5 100644
--- a/drivers/soc/sunxi/sunxi_sram.c
+++ b/drivers/soc/sunxi/sunxi_sram.c
@@ -194,7 +194,7 @@ static const struct sunxi_sram_data *sunxi_sram_of_parse(struct device_node *nod
if (!data) {
ret = -EINVAL;
goto err;
- };
+ }
for (func = data->func; func->func; func++) {
if (val == func->val) {
diff --git a/drivers/soc/tegra/Kconfig b/drivers/soc/tegra/Kconfig
index 6bc603d..976dee0 100644
--- a/drivers/soc/tegra/Kconfig
+++ b/drivers/soc/tegra/Kconfig
@@ -119,6 +119,16 @@
help
Enable support for the NVIDIA Tegra194 SoC.
+config ARCH_TEGRA_234_SOC
+ bool "NVIDIA Tegra234 SoC"
+ select MAILBOX
+ select TEGRA_BPMP
+ select TEGRA_HSP_MBOX
+ select TEGRA_IVC
+ select SOC_TEGRA_PMC
+ help
+ Enable support for the NVIDIA Tegra234 SoC.
+
endif
endif
diff --git a/drivers/soc/tegra/fuse/fuse-tegra.c b/drivers/soc/tegra/fuse/fuse-tegra.c
index d1f8dd0..94b60a6 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra.c
@@ -49,6 +49,9 @@ static struct tegra_fuse *fuse = &(struct tegra_fuse) {
};
static const struct of_device_id tegra_fuse_match[] = {
+#ifdef CONFIG_ARCH_TEGRA_234_SOC
+ { .compatible = "nvidia,tegra234-efuse", .data = &tegra234_fuse_soc },
+#endif
#ifdef CONFIG_ARCH_TEGRA_194_SOC
{ .compatible = "nvidia,tegra194-efuse", .data = &tegra194_fuse_soc },
#endif
@@ -326,7 +329,8 @@ const struct attribute_group tegra_soc_attr_group = {
.attrs = tegra_soc_attr,
};
-#ifdef CONFIG_ARCH_TEGRA_194_SOC
+#if IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
+ IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC)
static ssize_t platform_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
@@ -336,7 +340,7 @@ static ssize_t platform_show(struct device *dev, struct device_attribute *attr,
* platform type is silicon and all other non-zero values indicate
* the type of simulation platform is being used.
*/
- return sprintf(buf, "%d\n", (tegra_read_chipid() >> 20) & 0xf);
+ return sprintf(buf, "%d\n", tegra_get_platform());
}
static DEVICE_ATTR_RO(platform);
diff --git a/drivers/soc/tegra/fuse/fuse-tegra30.c b/drivers/soc/tegra/fuse/fuse-tegra30.c
index 85accef..9ea7f016 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra30.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra30.c
@@ -356,3 +356,33 @@ const struct tegra_fuse_soc tegra194_fuse_soc = {
.soc_attr_group = &tegra194_soc_attr_group,
};
#endif
+
+#if defined(CONFIG_ARCH_TEGRA_234_SOC)
+static const struct nvmem_cell_lookup tegra234_fuse_lookups[] = {
+ {
+ .nvmem_name = "fuse",
+ .cell_name = "xusb-pad-calibration",
+ .dev_id = "3520000.padctl",
+ .con_id = "calibration",
+ }, {
+ .nvmem_name = "fuse",
+ .cell_name = "xusb-pad-calibration-ext",
+ .dev_id = "3520000.padctl",
+ .con_id = "calibration-ext",
+ },
+};
+
+static const struct tegra_fuse_info tegra234_fuse_info = {
+ .read = tegra30_fuse_read,
+ .size = 0x300,
+ .spare = 0x280,
+};
+
+const struct tegra_fuse_soc tegra234_fuse_soc = {
+ .init = tegra30_fuse_init,
+ .info = &tegra234_fuse_info,
+ .lookups = tegra234_fuse_lookups,
+ .num_lookups = ARRAY_SIZE(tegra234_fuse_lookups),
+ .soc_attr_group = &tegra194_soc_attr_group,
+};
+#endif
diff --git a/drivers/soc/tegra/fuse/fuse.h b/drivers/soc/tegra/fuse/fuse.h
index 9d4fc31..e057a58 100644
--- a/drivers/soc/tegra/fuse/fuse.h
+++ b/drivers/soc/tegra/fuse/fuse.h
@@ -115,9 +115,17 @@ extern const struct tegra_fuse_soc tegra210_fuse_soc;
extern const struct tegra_fuse_soc tegra186_fuse_soc;
#endif
+#if IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
+ IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC)
+extern const struct attribute_group tegra194_soc_attr_group;
+#endif
+
#ifdef CONFIG_ARCH_TEGRA_194_SOC
extern const struct tegra_fuse_soc tegra194_fuse_soc;
-extern const struct attribute_group tegra194_soc_attr_group;
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_234_SOC
+extern const struct tegra_fuse_soc tegra234_fuse_soc;
#endif
#endif
diff --git a/drivers/soc/tegra/fuse/tegra-apbmisc.c b/drivers/soc/tegra/fuse/tegra-apbmisc.c
index 8e416ad..cee207d 100644
--- a/drivers/soc/tegra/fuse/tegra-apbmisc.c
+++ b/drivers/soc/tegra/fuse/tegra-apbmisc.c
@@ -47,6 +47,31 @@ u8 tegra_get_minor_rev(void)
return (tegra_read_chipid() >> 16) & 0xf;
}
+u8 tegra_get_platform(void)
+{
+ return (tegra_read_chipid() >> 20) & 0xf;
+}
+
+bool tegra_is_silicon(void)
+{
+ switch (tegra_get_chip_id()) {
+ case TEGRA194:
+ case TEGRA234:
+ if (tegra_get_platform() == 0)
+ return true;
+
+ return false;
+ }
+
+ /*
+ * Chips prior to Tegra194 have a different way of determining whether
+ * they are silicon or not. Since we never supported simulation on the
+ * older Tegra chips, don't bother extracting the information and just
+ * report that we're running on silicon.
+ */
+ return true;
+}
+
u32 tegra_read_straps(void)
{
WARN(!chipid, "Tegra ABP MISC not yet available\n");
@@ -70,6 +95,7 @@ static const struct of_device_id apbmisc_match[] __initconst = {
{ .compatible = "nvidia,tegra20-apbmisc", },
{ .compatible = "nvidia,tegra186-misc", },
{ .compatible = "nvidia,tegra194-misc", },
+ { .compatible = "nvidia,tegra234-misc", },
{},
};
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index b0bba8a..df9a5ca 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -336,45 +336,6 @@ struct tegra_pmc_soc {
bool has_blink_output;
};
-static const char * const tegra186_reset_sources[] = {
- "SYS_RESET",
- "AOWDT",
- "MCCPLEXWDT",
- "BPMPWDT",
- "SCEWDT",
- "SPEWDT",
- "APEWDT",
- "BCCPLEXWDT",
- "SENSOR",
- "AOTAG",
- "VFSENSOR",
- "SWREST",
- "SC7",
- "HSM",
- "CORESIGHT"
-};
-
-static const char * const tegra186_reset_levels[] = {
- "L0", "L1", "L2", "WARM"
-};
-
-static const char * const tegra30_reset_sources[] = {
- "POWER_ON_RESET",
- "WATCHDOG",
- "SENSOR",
- "SW_MAIN",
- "LP0"
-};
-
-static const char * const tegra210_reset_sources[] = {
- "POWER_ON_RESET",
- "WATCHDOG",
- "SENSOR",
- "SW_MAIN",
- "LP0",
- "AOTAG"
-};
-
/**
* struct tegra_pmc - NVIDIA Tegra PMC
* @dev: pointer to PMC device structure
@@ -2771,6 +2732,14 @@ static const u8 tegra30_cpu_powergates[] = {
TEGRA_POWERGATE_CPU3,
};
+static const char * const tegra30_reset_sources[] = {
+ "POWER_ON_RESET",
+ "WATCHDOG",
+ "SENSOR",
+ "SW_MAIN",
+ "LP0"
+};
+
static const struct tegra_pmc_soc tegra30_pmc_soc = {
.num_powergates = ARRAY_SIZE(tegra30_powergates),
.powergates = tegra30_powergates,
@@ -3048,6 +3017,15 @@ static const struct pinctrl_pin_desc tegra210_pin_descs[] = {
TEGRA210_IO_PAD_TABLE(TEGRA_IO_PIN_DESC)
};
+static const char * const tegra210_reset_sources[] = {
+ "POWER_ON_RESET",
+ "WATCHDOG",
+ "SENSOR",
+ "SW_MAIN",
+ "LP0",
+ "AOTAG"
+};
+
static const struct tegra_wake_event tegra210_wake_events[] = {
TEGRA_WAKE_IRQ("rtc", 16, 2),
TEGRA_WAKE_IRQ("pmu", 51, 86),
@@ -3180,6 +3158,28 @@ static void tegra186_pmc_setup_irq_polarity(struct tegra_pmc *pmc,
iounmap(wake);
}
+static const char * const tegra186_reset_sources[] = {
+ "SYS_RESET",
+ "AOWDT",
+ "MCCPLEXWDT",
+ "BPMPWDT",
+ "SCEWDT",
+ "SPEWDT",
+ "APEWDT",
+ "BCCPLEXWDT",
+ "SENSOR",
+ "AOTAG",
+ "VFSENSOR",
+ "SWREST",
+ "SC7",
+ "HSM",
+ "CORESIGHT"
+};
+
+static const char * const tegra186_reset_levels[] = {
+ "L0", "L1", "L2", "WARM"
+};
+
static const struct tegra_wake_event tegra186_wake_events[] = {
TEGRA_WAKE_IRQ("pmu", 24, 209),
TEGRA_WAKE_GPIO("power", 29, 1, TEGRA186_AON_GPIO(FF, 0)),
@@ -3349,7 +3349,75 @@ static const struct tegra_pmc_soc tegra194_pmc_soc = {
.has_blink_output = false,
};
+static const struct tegra_pmc_regs tegra234_pmc_regs = {
+ .scratch0 = 0x2000,
+ .dpd_req = 0,
+ .dpd_status = 0,
+ .dpd2_req = 0,
+ .dpd2_status = 0,
+ .rst_status = 0x70,
+ .rst_source_shift = 0x2,
+ .rst_source_mask = 0xfc,
+ .rst_level_shift = 0x0,
+ .rst_level_mask = 0x3,
+};
+
+static const char * const tegra234_reset_sources[] = {
+ "SYS_RESET_N",
+ "AOWDT",
+ "BCCPLEXWDT",
+ "BPMPWDT",
+ "SCEWDT",
+ "SPEWDT",
+ "APEWDT",
+ "LCCPLEXWDT",
+ "SENSOR",
+ "AOTAG",
+ "VFSENSOR",
+ "MAINSWRST",
+ "SC7",
+ "HSM",
+ "CSITE",
+ "RCEWDT",
+ "PVA0WDT",
+ "PVA1WDT",
+ "L1A_ASYNC",
+ "BPMPBOOT",
+ "FUSECRC",
+};
+
+static const struct tegra_pmc_soc tegra234_pmc_soc = {
+ .num_powergates = 0,
+ .powergates = NULL,
+ .num_cpu_powergates = 0,
+ .cpu_powergates = NULL,
+ .has_tsense_reset = false,
+ .has_gpu_clamps = false,
+ .needs_mbist_war = false,
+ .has_impl_33v_pwr = true,
+ .maybe_tz_only = false,
+ .num_io_pads = 0,
+ .io_pads = NULL,
+ .num_pin_descs = 0,
+ .pin_descs = NULL,
+ .regs = &tegra234_pmc_regs,
+ .init = NULL,
+ .setup_irq_polarity = tegra186_pmc_setup_irq_polarity,
+ .irq_set_wake = tegra186_pmc_irq_set_wake,
+ .irq_set_type = tegra186_pmc_irq_set_type,
+ .reset_sources = tegra234_reset_sources,
+ .num_reset_sources = ARRAY_SIZE(tegra234_reset_sources),
+ .reset_levels = tegra186_reset_levels,
+ .num_reset_levels = ARRAY_SIZE(tegra186_reset_levels),
+ .num_wake_events = 0,
+ .wake_events = NULL,
+ .pmc_clks_data = NULL,
+ .num_pmc_clks = 0,
+ .has_blink_output = false,
+};
+
static const struct of_device_id tegra_pmc_match[] = {
+ { .compatible = "nvidia,tegra234-pmc", .data = &tegra234_pmc_soc },
{ .compatible = "nvidia,tegra194-pmc", .data = &tegra194_pmc_soc },
{ .compatible = "nvidia,tegra186-pmc", .data = &tegra186_pmc_soc },
{ .compatible = "nvidia,tegra210-pmc", .data = &tegra210_pmc_soc },
diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
index e192fb7..f5b82ff 100644
--- a/drivers/soc/ti/Kconfig
+++ b/drivers/soc/ti/Kconfig
@@ -101,6 +101,17 @@
platforms to provide information about the SoC family and
variant to user space.
+config TI_PRUSS
+ tristate "TI PRU-ICSS Subsystem Platform drivers"
+ depends on SOC_AM33XX || SOC_AM43XX || SOC_DRA7XX || ARCH_KEYSTONE || ARCH_K3
+ select MFD_SYSCON
+ help
+ TI PRU-ICSS Subsystem platform specific support.
+
+ Say Y or M here to support the Programmable Realtime Unit (PRU)
+ processors on various TI SoCs. It's safe to say N here if you're
+ not interested in the PRU or if you are unsure.
+
endif # SOC_TI
config TI_SCI_INTA_MSI_DOMAIN
diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile
index 1110e5c..cc3c972 100644
--- a/drivers/soc/ti/Makefile
+++ b/drivers/soc/ti/Makefile
@@ -12,3 +12,5 @@
obj-$(CONFIG_TI_SCI_INTA_MSI_DOMAIN) += ti_sci_inta_msi.o
obj-$(CONFIG_TI_K3_RINGACC) += k3-ringacc.o
obj-$(CONFIG_TI_K3_SOCINFO) += k3-socinfo.o
+obj-$(CONFIG_TI_PRUSS) += pruss.o
+obj-$(CONFIG_POWER_AVS_OMAP) += smartreflex.o
diff --git a/drivers/soc/ti/k3-ringacc.c b/drivers/soc/ti/k3-ringacc.c
index 6dcc21d..1147dc4 100644
--- a/drivers/soc/ti/k3-ringacc.c
+++ b/drivers/soc/ti/k3-ringacc.c
@@ -10,6 +10,7 @@
#include <linux/init.h>
#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/sys_soc.h>
#include <linux/soc/ti/k3-ringacc.h>
#include <linux/soc/ti/ti_sci_protocol.h>
#include <linux/soc/ti/ti_sci_inta_msi.h>
@@ -208,6 +209,15 @@ struct k3_ringacc {
const struct k3_ringacc_ops *ops;
};
+/**
+ * struct k3_ringacc - Rings accelerator SoC data
+ *
+ * @dma_ring_reset_quirk: DMA reset w/a enable
+ */
+struct k3_ringacc_soc_data {
+ unsigned dma_ring_reset_quirk:1;
+};
+
static long k3_ringacc_ring_get_fifo_pos(struct k3_ring *ring)
{
return K3_RINGACC_FIFO_WINDOW_SIZE_BYTES -
@@ -1051,9 +1061,6 @@ static int k3_ringacc_probe_dt(struct k3_ringacc *ringacc)
return ret;
}
- ringacc->dma_ring_reset_quirk =
- of_property_read_bool(node, "ti,dma-ring-reset-quirk");
-
ringacc->tisci = ti_sci_get_by_phandle(node, "ti,sci");
if (IS_ERR(ringacc->tisci)) {
ret = PTR_ERR(ringacc->tisci);
@@ -1084,9 +1091,22 @@ static int k3_ringacc_probe_dt(struct k3_ringacc *ringacc)
ringacc->rm_gp_range);
}
+static const struct k3_ringacc_soc_data k3_ringacc_soc_data_sr1 = {
+ .dma_ring_reset_quirk = 1,
+};
+
+static const struct soc_device_attribute k3_ringacc_socinfo[] = {
+ { .family = "AM65X",
+ .revision = "SR1.0",
+ .data = &k3_ringacc_soc_data_sr1
+ },
+ {/* sentinel */}
+};
+
static int k3_ringacc_init(struct platform_device *pdev,
struct k3_ringacc *ringacc)
{
+ const struct soc_device_attribute *soc;
void __iomem *base_fifo, *base_rt;
struct device *dev = &pdev->dev;
struct resource *res;
@@ -1103,6 +1123,13 @@ static int k3_ringacc_init(struct platform_device *pdev,
if (ret)
return ret;
+ soc = soc_device_match(k3_ringacc_socinfo);
+ if (soc && soc->data) {
+ const struct k3_ringacc_soc_data *soc_data = soc->data;
+
+ ringacc->dma_ring_reset_quirk = soc_data->dma_ring_reset_quirk;
+ }
+
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rt");
base_rt = devm_ioremap_resource(dev, res);
if (IS_ERR(base_rt))
diff --git a/drivers/soc/ti/k3-socinfo.c b/drivers/soc/ti/k3-socinfo.c
index af0ba52..bbbc2d2 100644
--- a/drivers/soc/ti/k3-socinfo.c
+++ b/drivers/soc/ti/k3-socinfo.c
@@ -39,6 +39,7 @@ static const struct k3_soc_id {
} k3_soc_ids[] = {
{ 0xBB5A, "AM65X" },
{ 0xBB64, "J721E" },
+ { 0xBB6D, "J7200" },
};
static int
diff --git a/drivers/soc/ti/knav_dma.c b/drivers/soc/ti/knav_dma.c
index 6285cd8..8c863ec 100644
--- a/drivers/soc/ti/knav_dma.c
+++ b/drivers/soc/ti/knav_dma.c
@@ -355,7 +355,7 @@ static void dma_debug_show_devices(struct seq_file *s,
}
}
-static int dma_debug_show(struct seq_file *s, void *v)
+static int knav_dma_debug_show(struct seq_file *s, void *v)
{
struct knav_dma_device *dma;
@@ -370,17 +370,7 @@ static int dma_debug_show(struct seq_file *s, void *v)
return 0;
}
-static int knav_dma_debug_open(struct inode *inode, struct file *file)
-{
- return single_open(file, dma_debug_show, NULL);
-}
-
-static const struct file_operations knav_dma_debug_ops = {
- .open = knav_dma_debug_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(knav_dma_debug);
static int of_channel_match_helper(struct device_node *np, const char *name,
const char **dma_instance)
@@ -778,7 +768,7 @@ static int knav_dma_probe(struct platform_device *pdev)
}
debugfs_create_file("knav_dma", S_IFREG | S_IRUGO, NULL, NULL,
- &knav_dma_debug_ops);
+ &knav_dma_debug_fops);
device_ready = true;
return ret;
diff --git a/drivers/soc/ti/knav_qmss_queue.c b/drivers/soc/ti/knav_qmss_queue.c
index aa071d9..a460f20 100644
--- a/drivers/soc/ti/knav_qmss_queue.c
+++ b/drivers/soc/ti/knav_qmss_queue.c
@@ -478,17 +478,7 @@ static int knav_queue_debug_show(struct seq_file *s, void *v)
return 0;
}
-static int knav_queue_debug_open(struct inode *inode, struct file *file)
-{
- return single_open(file, knav_queue_debug_show, NULL);
-}
-
-static const struct file_operations knav_queue_debug_ops = {
- .open = knav_queue_debug_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(knav_queue_debug);
static inline int knav_queue_pdsp_wait(u32 * __iomem addr, unsigned timeout,
u32 flags)
@@ -1878,7 +1868,7 @@ static int knav_queue_probe(struct platform_device *pdev)
}
debugfs_create_file("qmss", S_IFREG | S_IRUGO, NULL, NULL,
- &knav_queue_debug_ops);
+ &knav_queue_debug_fops);
device_ready = true;
return 0;
diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c
index c9b3f9e..980b04c 100644
--- a/drivers/soc/ti/omap_prm.c
+++ b/drivers/soc/ti/omap_prm.c
@@ -10,14 +10,39 @@
#include <linux/device.h>
#include <linux/io.h>
#include <linux/iopoll.h>
+#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
#include <linux/reset-controller.h>
#include <linux/delay.h>
#include <linux/platform_data/ti-prm.h>
+enum omap_prm_domain_mode {
+ OMAP_PRMD_OFF,
+ OMAP_PRMD_RETENTION,
+ OMAP_PRMD_ON_INACTIVE,
+ OMAP_PRMD_ON_ACTIVE,
+};
+
+struct omap_prm_domain_map {
+ unsigned int usable_modes; /* Mask of hardware supported modes */
+ unsigned long statechange:1; /* Optional low-power state change */
+ unsigned long logicretstate:1; /* Optional logic off mode */
+};
+
+struct omap_prm_domain {
+ struct device *dev;
+ struct omap_prm *prm;
+ struct generic_pm_domain pd;
+ u16 pwrstctrl;
+ u16 pwrstst;
+ const struct omap_prm_domain_map *cap;
+ u32 pwrstctrl_saved;
+};
+
struct omap_rst_map {
s8 rst;
s8 st;
@@ -27,6 +52,9 @@ struct omap_prm_data {
u32 base;
const char *name;
const char *clkdm_name;
+ u16 pwrstctrl;
+ u16 pwrstst;
+ const struct omap_prm_domain_map *dmap;
u16 rstctrl;
u16 rstst;
const struct omap_rst_map *rstmap;
@@ -36,6 +64,7 @@ struct omap_prm_data {
struct omap_prm {
const struct omap_prm_data *data;
void __iomem *base;
+ struct omap_prm_domain *prmd;
};
struct omap_reset_data {
@@ -47,6 +76,7 @@ struct omap_reset_data {
struct device *dev;
};
+#define genpd_to_prm_domain(gpd) container_of(gpd, struct omap_prm_domain, pd)
#define to_omap_reset_data(p) container_of((p), struct omap_reset_data, rcdev)
#define OMAP_MAX_RESETS 8
@@ -58,6 +88,39 @@ struct omap_reset_data {
#define OMAP_PRM_HAS_RESETS (OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_RSTST)
+#define PRM_STATE_MAX_WAIT 10000
+#define PRM_LOGICRETSTATE BIT(2)
+#define PRM_LOWPOWERSTATECHANGE BIT(4)
+#define PRM_POWERSTATE_MASK OMAP_PRMD_ON_ACTIVE
+
+#define PRM_ST_INTRANSITION BIT(20)
+
+static const struct omap_prm_domain_map omap_prm_all = {
+ .usable_modes = BIT(OMAP_PRMD_ON_ACTIVE) | BIT(OMAP_PRMD_ON_INACTIVE) |
+ BIT(OMAP_PRMD_RETENTION) | BIT(OMAP_PRMD_OFF),
+ .statechange = 1,
+ .logicretstate = 1,
+};
+
+static const struct omap_prm_domain_map omap_prm_noinact = {
+ .usable_modes = BIT(OMAP_PRMD_ON_ACTIVE) | BIT(OMAP_PRMD_RETENTION) |
+ BIT(OMAP_PRMD_OFF),
+ .statechange = 1,
+ .logicretstate = 1,
+};
+
+static const struct omap_prm_domain_map omap_prm_nooff = {
+ .usable_modes = BIT(OMAP_PRMD_ON_ACTIVE) | BIT(OMAP_PRMD_ON_INACTIVE) |
+ BIT(OMAP_PRMD_RETENTION),
+ .statechange = 1,
+ .logicretstate = 1,
+};
+
+static const struct omap_prm_domain_map omap_prm_onoff_noauto = {
+ .usable_modes = BIT(OMAP_PRMD_ON_ACTIVE) | BIT(OMAP_PRMD_OFF),
+ .statechange = 1,
+};
+
static const struct omap_rst_map rst_map_0[] = {
{ .rst = 0, .st = 0 },
{ .rst = -1 },
@@ -78,6 +141,10 @@ static const struct omap_rst_map rst_map_012[] = {
static const struct omap_prm_data omap4_prm_data[] = {
{ .name = "tesla", .base = 0x4a306400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
+ {
+ .name = "abe", .base = 0x4a306500,
+ .pwrstctrl = 0, .pwrstst = 0x4, .dmap = &omap_prm_all,
+ },
{ .name = "core", .base = 0x4a306700, .rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ducati", .rstmap = rst_map_012 },
{ .name = "ivahd", .base = 0x4a306f00, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012 },
{ .name = "device", .base = 0x4a307b00, .rstctrl = 0x0, .rstst = 0x4, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
@@ -86,6 +153,10 @@ static const struct omap_prm_data omap4_prm_data[] = {
static const struct omap_prm_data omap5_prm_data[] = {
{ .name = "dsp", .base = 0x4ae06400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
+ {
+ .name = "abe", .base = 0x4ae06500,
+ .pwrstctrl = 0, .pwrstst = 0x4, .dmap = &omap_prm_nooff,
+ },
{ .name = "core", .base = 0x4ae06700, .rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ipu", .rstmap = rst_map_012 },
{ .name = "iva", .base = 0x4ae07200, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012 },
{ .name = "device", .base = 0x4ae07c00, .rstctrl = 0x0, .rstst = 0x4, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
@@ -119,7 +190,11 @@ static const struct omap_prm_data am3_prm_data[] = {
{ .name = "per", .base = 0x44e00c00, .rstctrl = 0x0, .rstmap = am3_per_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL, .clkdm_name = "pruss_ocp" },
{ .name = "wkup", .base = 0x44e00d00, .rstctrl = 0x0, .rstst = 0xc, .rstmap = am3_wkup_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
{ .name = "device", .base = 0x44e00f00, .rstctrl = 0x0, .rstst = 0x8, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
- { .name = "gfx", .base = 0x44e01100, .rstctrl = 0x4, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3" },
+ {
+ .name = "gfx", .base = 0x44e01100,
+ .pwrstctrl = 0, .pwrstst = 0x10, .dmap = &omap_prm_noinact,
+ .rstctrl = 0x4, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3",
+ },
{ },
};
@@ -135,7 +210,11 @@ static const struct omap_rst_map am4_device_rst_map[] = {
};
static const struct omap_prm_data am4_prm_data[] = {
- { .name = "gfx", .base = 0x44df0400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3" },
+ {
+ .name = "gfx", .base = 0x44df0400,
+ .pwrstctrl = 0, .pwrstst = 0x4, .dmap = &omap_prm_onoff_noauto,
+ .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3",
+ },
{ .name = "per", .base = 0x44df0800, .rstctrl = 0x10, .rstst = 0x14, .rstmap = am4_per_rst_map, .clkdm_name = "pruss_ocp" },
{ .name = "wkup", .base = 0x44df2000, .rstctrl = 0x10, .rstst = 0x14, .rstmap = am3_wkup_rst_map, .flags = OMAP_PRM_HAS_NO_CLKDM },
{ .name = "device", .base = 0x44df4000, .rstctrl = 0x0, .rstst = 0x4, .rstmap = am4_device_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
@@ -151,6 +230,180 @@ static const struct of_device_id omap_prm_id_table[] = {
{ },
};
+#ifdef DEBUG
+static void omap_prm_domain_show_state(struct omap_prm_domain *prmd,
+ const char *desc)
+{
+ dev_dbg(prmd->dev, "%s %s: %08x/%08x\n",
+ prmd->pd.name, desc,
+ readl_relaxed(prmd->prm->base + prmd->pwrstctrl),
+ readl_relaxed(prmd->prm->base + prmd->pwrstst));
+}
+#else
+static inline void omap_prm_domain_show_state(struct omap_prm_domain *prmd,
+ const char *desc)
+{
+}
+#endif
+
+static int omap_prm_domain_power_on(struct generic_pm_domain *domain)
+{
+ struct omap_prm_domain *prmd;
+ int ret;
+ u32 v;
+
+ prmd = genpd_to_prm_domain(domain);
+ if (!prmd->cap)
+ return 0;
+
+ omap_prm_domain_show_state(prmd, "on: previous state");
+
+ if (prmd->pwrstctrl_saved)
+ v = prmd->pwrstctrl_saved;
+ else
+ v = readl_relaxed(prmd->prm->base + prmd->pwrstctrl);
+
+ writel_relaxed(v | OMAP_PRMD_ON_ACTIVE,
+ prmd->prm->base + prmd->pwrstctrl);
+
+ /* wait for the transition bit to get cleared */
+ ret = readl_relaxed_poll_timeout(prmd->prm->base + prmd->pwrstst,
+ v, !(v & PRM_ST_INTRANSITION), 1,
+ PRM_STATE_MAX_WAIT);
+ if (ret)
+ dev_err(prmd->dev, "%s: %s timed out\n",
+ prmd->pd.name, __func__);
+
+ omap_prm_domain_show_state(prmd, "on: new state");
+
+ return ret;
+}
+
+/* No need to check for holes in the mask for the lowest mode */
+static int omap_prm_domain_find_lowest(struct omap_prm_domain *prmd)
+{
+ return __ffs(prmd->cap->usable_modes);
+}
+
+static int omap_prm_domain_power_off(struct generic_pm_domain *domain)
+{
+ struct omap_prm_domain *prmd;
+ int ret;
+ u32 v;
+
+ prmd = genpd_to_prm_domain(domain);
+ if (!prmd->cap)
+ return 0;
+
+ omap_prm_domain_show_state(prmd, "off: previous state");
+
+ v = readl_relaxed(prmd->prm->base + prmd->pwrstctrl);
+ prmd->pwrstctrl_saved = v;
+
+ v &= ~PRM_POWERSTATE_MASK;
+ v |= omap_prm_domain_find_lowest(prmd);
+
+ if (prmd->cap->statechange)
+ v |= PRM_LOWPOWERSTATECHANGE;
+ if (prmd->cap->logicretstate)
+ v &= ~PRM_LOGICRETSTATE;
+ else
+ v |= PRM_LOGICRETSTATE;
+
+ writel_relaxed(v, prmd->prm->base + prmd->pwrstctrl);
+
+ /* wait for the transition bit to get cleared */
+ ret = readl_relaxed_poll_timeout(prmd->prm->base + prmd->pwrstst,
+ v, !(v & PRM_ST_INTRANSITION), 1,
+ PRM_STATE_MAX_WAIT);
+ if (ret)
+ dev_warn(prmd->dev, "%s: %s timed out\n",
+ __func__, prmd->pd.name);
+
+ omap_prm_domain_show_state(prmd, "off: new state");
+
+ return 0;
+}
+
+static int omap_prm_domain_attach_dev(struct generic_pm_domain *domain,
+ struct device *dev)
+{
+ struct generic_pm_domain_data *genpd_data;
+ struct of_phandle_args pd_args;
+ struct omap_prm_domain *prmd;
+ struct device_node *np;
+ int ret;
+
+ prmd = genpd_to_prm_domain(domain);
+ np = dev->of_node;
+
+ ret = of_parse_phandle_with_args(np, "power-domains",
+ "#power-domain-cells", 0, &pd_args);
+ if (ret < 0)
+ return ret;
+
+ if (pd_args.args_count != 0)
+ dev_warn(dev, "%s: unusupported #power-domain-cells: %i\n",
+ prmd->pd.name, pd_args.args_count);
+
+ genpd_data = dev_gpd_data(dev);
+ genpd_data->data = NULL;
+
+ return 0;
+}
+
+static void omap_prm_domain_detach_dev(struct generic_pm_domain *domain,
+ struct device *dev)
+{
+ struct generic_pm_domain_data *genpd_data;
+
+ genpd_data = dev_gpd_data(dev);
+ genpd_data->data = NULL;
+}
+
+static int omap_prm_domain_init(struct device *dev, struct omap_prm *prm)
+{
+ struct omap_prm_domain *prmd;
+ struct device_node *np = dev->of_node;
+ const struct omap_prm_data *data;
+ const char *name;
+ int error;
+
+ if (!of_find_property(dev->of_node, "#power-domain-cells", NULL))
+ return 0;
+
+ of_node_put(dev->of_node);
+
+ prmd = devm_kzalloc(dev, sizeof(*prmd), GFP_KERNEL);
+ if (!prmd)
+ return -ENOMEM;
+
+ data = prm->data;
+ name = devm_kasprintf(dev, GFP_KERNEL, "prm_%s",
+ data->name);
+
+ prmd->dev = dev;
+ prmd->prm = prm;
+ prmd->cap = prmd->prm->data->dmap;
+ prmd->pwrstctrl = prmd->prm->data->pwrstctrl;
+ prmd->pwrstst = prmd->prm->data->pwrstst;
+
+ prmd->pd.name = name;
+ prmd->pd.power_on = omap_prm_domain_power_on;
+ prmd->pd.power_off = omap_prm_domain_power_off;
+ prmd->pd.attach_dev = omap_prm_domain_attach_dev;
+ prmd->pd.detach_dev = omap_prm_domain_detach_dev;
+
+ pm_genpd_init(&prmd->pd, NULL, true);
+ error = of_genpd_add_provider_simple(np, &prmd->pd);
+ if (error)
+ pm_genpd_remove(&prmd->pd);
+ else
+ prm->prmd = prmd;
+
+ return error;
+}
+
static bool _is_valid_reset(struct omap_reset_data *reset, unsigned long id)
{
if (reset->mask & BIT(id))
@@ -351,6 +604,7 @@ static int omap_prm_probe(struct platform_device *pdev)
const struct omap_prm_data *data;
struct omap_prm *prm;
const struct of_device_id *match;
+ int ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
@@ -378,7 +632,21 @@ static int omap_prm_probe(struct platform_device *pdev)
if (IS_ERR(prm->base))
return PTR_ERR(prm->base);
- return omap_prm_reset_init(pdev, prm);
+ ret = omap_prm_domain_init(&pdev->dev, prm);
+ if (ret)
+ return ret;
+
+ ret = omap_prm_reset_init(pdev, prm);
+ if (ret)
+ goto err_domain;
+
+ return 0;
+
+err_domain:
+ of_genpd_del_provider(pdev->dev.of_node);
+ pm_genpd_remove(&prm->prmd->pd);
+
+ return ret;
}
static struct platform_driver omap_prm_driver = {
diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti/pm33xx.c
index de0123e..d2f5e70 100644
--- a/drivers/soc/ti/pm33xx.c
+++ b/drivers/soc/ti/pm33xx.c
@@ -16,6 +16,7 @@
#include <linux/module.h>
#include <linux/nvmem-consumer.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/platform_data/pm33xx.h>
#include <linux/platform_device.h>
#include <linux/rtc.h>
@@ -39,6 +40,8 @@
#define GIC_INT_SET_PENDING_BASE 0x200
#define AM43XX_GIC_DIST_BASE 0x48241000
+static void __iomem *rtc_base_virt;
+static struct clk *rtc_fck;
static u32 rtc_magic_val;
static int (*am33xx_do_wfi_sram)(unsigned long unused);
@@ -90,7 +93,7 @@ static int am33xx_push_sram_idle(void)
ro_sram_data.amx3_pm_sram_data_virt = ocmcram_location_data;
ro_sram_data.amx3_pm_sram_data_phys =
gen_pool_virt_to_phys(sram_pool_data, ocmcram_location_data);
- ro_sram_data.rtc_base_virt = pm_ops->get_rtc_base_addr();
+ ro_sram_data.rtc_base_virt = rtc_base_virt;
/* Save physical address to calculate resume offset during pm init */
am33xx_do_wfi_sram_phys = gen_pool_virt_to_phys(sram_pool,
@@ -158,7 +161,7 @@ static struct wkup_m3_wakeup_src rtc_wake_src(void)
{
u32 i;
- i = __raw_readl(pm_ops->get_rtc_base_addr() + 0x44) & 0x40;
+ i = __raw_readl(rtc_base_virt + 0x44) & 0x40;
if (i) {
retrigger_irq = rtc_alarm_wakeup.irq_nr;
@@ -177,13 +180,24 @@ static int am33xx_rtc_only_idle(unsigned long wfi_flags)
return 0;
}
+/*
+ * Note that the RTC module clock must be re-enabled only for rtc+ddr suspend.
+ * And looks like the module can stay in SYSC_IDLE_SMART_WKUP mode configured
+ * by the interconnect code just fine for both rtc+ddr suspend and retention
+ * suspend.
+ */
static int am33xx_pm_suspend(suspend_state_t suspend_state)
{
int i, ret = 0;
if (suspend_state == PM_SUSPEND_MEM &&
pm_ops->check_off_mode_enable()) {
- pm_ops->prepare_rtc_suspend();
+ ret = clk_prepare_enable(rtc_fck);
+ if (ret) {
+ dev_err(pm33xx_dev, "Failed to enable clock: %i\n", ret);
+ return ret;
+ }
+
pm_ops->save_context();
suspend_wfi_flags |= WFI_FLAG_RTC_ONLY;
clk_save_context();
@@ -236,7 +250,7 @@ static int am33xx_pm_suspend(suspend_state_t suspend_state)
}
if (suspend_state == PM_SUSPEND_MEM && pm_ops->check_off_mode_enable())
- pm_ops->prepare_rtc_resume();
+ clk_disable_unprepare(rtc_fck);
return ret;
}
@@ -425,14 +439,28 @@ static int am33xx_pm_rtc_setup(void)
struct device_node *np;
unsigned long val = 0;
struct nvmem_device *nvmem;
+ int error;
np = of_find_node_by_name(NULL, "rtc");
if (of_device_is_available(np)) {
+ /* RTC interconnect target module clock */
+ rtc_fck = of_clk_get_by_name(np->parent, "fck");
+ if (IS_ERR(rtc_fck))
+ return PTR_ERR(rtc_fck);
+
+ rtc_base_virt = of_iomap(np, 0);
+ if (!rtc_base_virt) {
+ pr_warn("PM: could not iomap rtc");
+ error = -ENODEV;
+ goto err_clk_put;
+ }
+
omap_rtc = rtc_class_open("rtc0");
if (!omap_rtc) {
pr_warn("PM: rtc0 not available");
- return -EPROBE_DEFER;
+ error = -EPROBE_DEFER;
+ goto err_iounmap;
}
nvmem = devm_nvmem_device_get(&omap_rtc->dev,
@@ -454,6 +482,13 @@ static int am33xx_pm_rtc_setup(void)
}
return 0;
+
+err_iounmap:
+ iounmap(rtc_base_virt);
+err_clk_put:
+ clk_put(rtc_fck);
+
+ return error;
}
static int am33xx_pm_probe(struct platform_device *pdev)
@@ -544,6 +579,8 @@ static int am33xx_pm_remove(struct platform_device *pdev)
suspend_set_ops(NULL);
wkup_m3_ipc_put(m3_ipc);
am33xx_pm_free_sram();
+ iounmap(rtc_base_virt);
+ clk_put(rtc_fck);
return 0;
}
diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
new file mode 100644
index 0000000..cc0b4ad
--- /dev/null
+++ b/drivers/soc/ti/pruss.c
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PRU-ICSS platform driver for various TI SoCs
+ *
+ * Copyright (C) 2014-2020 Texas Instruments Incorporated - http://www.ti.com/
+ * Author(s):
+ * Suman Anna <s-anna@ti.com>
+ * Andrew F. Davis <afd@ti.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pruss_driver.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/**
+ * struct pruss_private_data - PRUSS driver private data
+ * @has_no_sharedram: flag to indicate the absence of PRUSS Shared Data RAM
+ * @has_core_mux_clock: flag to indicate the presence of PRUSS core clock
+ */
+struct pruss_private_data {
+ bool has_no_sharedram;
+ bool has_core_mux_clock;
+};
+
+static void pruss_of_free_clk_provider(void *data)
+{
+ struct device_node *clk_mux_np = data;
+
+ of_clk_del_provider(clk_mux_np);
+ of_node_put(clk_mux_np);
+}
+
+static int pruss_clk_mux_setup(struct pruss *pruss, struct clk *clk_mux,
+ char *mux_name, struct device_node *clks_np)
+{
+ struct device_node *clk_mux_np;
+ struct device *dev = pruss->dev;
+ char *clk_mux_name;
+ unsigned int num_parents;
+ const char **parent_names;
+ void __iomem *reg;
+ u32 reg_offset;
+ int ret;
+
+ clk_mux_np = of_get_child_by_name(clks_np, mux_name);
+ if (!clk_mux_np) {
+ dev_err(dev, "%pOF is missing its '%s' node\n", clks_np,
+ mux_name);
+ return -ENODEV;
+ }
+
+ num_parents = of_clk_get_parent_count(clk_mux_np);
+ if (num_parents < 1) {
+ dev_err(dev, "mux-clock %pOF must have parents\n", clk_mux_np);
+ ret = -EINVAL;
+ goto put_clk_mux_np;
+ }
+
+ parent_names = devm_kcalloc(dev, sizeof(*parent_names), num_parents,
+ GFP_KERNEL);
+ if (!parent_names) {
+ ret = -ENOMEM;
+ goto put_clk_mux_np;
+ }
+
+ of_clk_parent_fill(clk_mux_np, parent_names, num_parents);
+
+ clk_mux_name = devm_kasprintf(dev, GFP_KERNEL, "%s.%pOFn",
+ dev_name(dev), clk_mux_np);
+ if (!clk_mux_name) {
+ ret = -ENOMEM;
+ goto put_clk_mux_np;
+ }
+
+ ret = of_property_read_u32(clk_mux_np, "reg", ®_offset);
+ if (ret)
+ goto put_clk_mux_np;
+
+ reg = pruss->cfg_base + reg_offset;
+
+ clk_mux = clk_register_mux(NULL, clk_mux_name, parent_names,
+ num_parents, 0, reg, 0, 1, 0, NULL);
+ if (IS_ERR(clk_mux)) {
+ ret = PTR_ERR(clk_mux);
+ goto put_clk_mux_np;
+ }
+
+ ret = devm_add_action_or_reset(dev, (void(*)(void *))clk_unregister_mux,
+ clk_mux);
+ if (ret) {
+ dev_err(dev, "failed to add clkmux unregister action %d", ret);
+ goto put_clk_mux_np;
+ }
+
+ ret = of_clk_add_provider(clk_mux_np, of_clk_src_simple_get, clk_mux);
+ if (ret)
+ goto put_clk_mux_np;
+
+ ret = devm_add_action_or_reset(dev, pruss_of_free_clk_provider,
+ clk_mux_np);
+ if (ret) {
+ dev_err(dev, "failed to add clkmux free action %d", ret);
+ goto put_clk_mux_np;
+ }
+
+ return 0;
+
+put_clk_mux_np:
+ of_node_put(clk_mux_np);
+ return ret;
+}
+
+static int pruss_clk_init(struct pruss *pruss, struct device_node *cfg_node)
+{
+ const struct pruss_private_data *data;
+ struct device_node *clks_np;
+ struct device *dev = pruss->dev;
+ int ret = 0;
+
+ data = of_device_get_match_data(dev);
+ if (IS_ERR(data))
+ return -ENODEV;
+
+ clks_np = of_get_child_by_name(cfg_node, "clocks");
+ if (!clks_np) {
+ dev_err(dev, "%pOF is missing its 'clocks' node\n", clks_np);
+ return -ENODEV;
+ }
+
+ if (data && data->has_core_mux_clock) {
+ ret = pruss_clk_mux_setup(pruss, pruss->core_clk_mux,
+ "coreclk-mux", clks_np);
+ if (ret) {
+ dev_err(dev, "failed to setup coreclk-mux\n");
+ goto put_clks_node;
+ }
+ }
+
+ ret = pruss_clk_mux_setup(pruss, pruss->iep_clk_mux, "iepclk-mux",
+ clks_np);
+ if (ret) {
+ dev_err(dev, "failed to setup iepclk-mux\n");
+ goto put_clks_node;
+ }
+
+put_clks_node:
+ of_node_put(clks_np);
+
+ return ret;
+}
+
+static struct regmap_config regmap_conf = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
+static int pruss_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev_of_node(dev);
+ struct device_node *child;
+ struct pruss *pruss;
+ struct resource res;
+ int ret, i, index;
+ const struct pruss_private_data *data;
+ const char *mem_names[PRUSS_MEM_MAX] = { "dram0", "dram1", "shrdram2" };
+
+ data = of_device_get_match_data(&pdev->dev);
+ if (IS_ERR(data)) {
+ dev_err(dev, "missing private data\n");
+ return -ENODEV;
+ }
+
+ ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(dev, "failed to set the DMA coherent mask");
+ return ret;
+ }
+
+ pruss = devm_kzalloc(dev, sizeof(*pruss), GFP_KERNEL);
+ if (!pruss)
+ return -ENOMEM;
+
+ pruss->dev = dev;
+
+ child = of_get_child_by_name(np, "memories");
+ if (!child) {
+ dev_err(dev, "%pOF is missing its 'memories' node\n", child);
+ return -ENODEV;
+ }
+
+ for (i = 0; i < PRUSS_MEM_MAX; i++) {
+ /*
+ * On AM437x one of two PRUSS units don't contain Shared RAM,
+ * skip it
+ */
+ if (data && data->has_no_sharedram && i == PRUSS_MEM_SHRD_RAM2)
+ continue;
+
+ index = of_property_match_string(child, "reg-names",
+ mem_names[i]);
+ if (index < 0) {
+ of_node_put(child);
+ return index;
+ }
+
+ if (of_address_to_resource(child, index, &res)) {
+ of_node_put(child);
+ return -EINVAL;
+ }
+
+ pruss->mem_regions[i].va = devm_ioremap(dev, res.start,
+ resource_size(&res));
+ if (!pruss->mem_regions[i].va) {
+ dev_err(dev, "failed to parse and map memory resource %d %s\n",
+ i, mem_names[i]);
+ of_node_put(child);
+ return -ENOMEM;
+ }
+ pruss->mem_regions[i].pa = res.start;
+ pruss->mem_regions[i].size = resource_size(&res);
+
+ dev_dbg(dev, "memory %8s: pa %pa size 0x%zx va %pK\n",
+ mem_names[i], &pruss->mem_regions[i].pa,
+ pruss->mem_regions[i].size, pruss->mem_regions[i].va);
+ }
+ of_node_put(child);
+
+ platform_set_drvdata(pdev, pruss);
+
+ pm_runtime_enable(dev);
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0) {
+ dev_err(dev, "couldn't enable module\n");
+ pm_runtime_put_noidle(dev);
+ goto rpm_disable;
+ }
+
+ child = of_get_child_by_name(np, "cfg");
+ if (!child) {
+ dev_err(dev, "%pOF is missing its 'cfg' node\n", child);
+ ret = -ENODEV;
+ goto rpm_put;
+ }
+
+ if (of_address_to_resource(child, 0, &res)) {
+ ret = -ENOMEM;
+ goto node_put;
+ }
+
+ pruss->cfg_base = devm_ioremap(dev, res.start, resource_size(&res));
+ if (!pruss->cfg_base) {
+ ret = -ENOMEM;
+ goto node_put;
+ }
+
+ regmap_conf.name = kasprintf(GFP_KERNEL, "%pOFn@%llx", child,
+ (u64)res.start);
+ regmap_conf.max_register = resource_size(&res) - 4;
+
+ pruss->cfg_regmap = devm_regmap_init_mmio(dev, pruss->cfg_base,
+ ®map_conf);
+ kfree(regmap_conf.name);
+ if (IS_ERR(pruss->cfg_regmap)) {
+ dev_err(dev, "regmap_init_mmio failed for cfg, ret = %ld\n",
+ PTR_ERR(pruss->cfg_regmap));
+ ret = PTR_ERR(pruss->cfg_regmap);
+ goto node_put;
+ }
+
+ ret = pruss_clk_init(pruss, child);
+ if (ret) {
+ dev_err(dev, "failed to setup coreclk-mux\n");
+ goto node_put;
+ }
+
+ ret = devm_of_platform_populate(dev);
+ if (ret) {
+ dev_err(dev, "failed to register child devices\n");
+ goto node_put;
+ }
+
+ of_node_put(child);
+
+ return 0;
+
+node_put:
+ of_node_put(child);
+rpm_put:
+ pm_runtime_put_sync(dev);
+rpm_disable:
+ pm_runtime_disable(dev);
+ return ret;
+}
+
+static int pruss_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+
+ devm_of_platform_depopulate(dev);
+
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
+
+ return 0;
+}
+
+/* instance-specific driver private data */
+static const struct pruss_private_data am437x_pruss1_data = {
+ .has_no_sharedram = false,
+};
+
+static const struct pruss_private_data am437x_pruss0_data = {
+ .has_no_sharedram = true,
+};
+
+static const struct pruss_private_data am65x_j721e_pruss_data = {
+ .has_core_mux_clock = true,
+};
+
+static const struct of_device_id pruss_of_match[] = {
+ { .compatible = "ti,am3356-pruss" },
+ { .compatible = "ti,am4376-pruss0", .data = &am437x_pruss0_data, },
+ { .compatible = "ti,am4376-pruss1", .data = &am437x_pruss1_data, },
+ { .compatible = "ti,am5728-pruss" },
+ { .compatible = "ti,k2g-pruss" },
+ { .compatible = "ti,am654-icssg", .data = &am65x_j721e_pruss_data, },
+ { .compatible = "ti,j721e-icssg", .data = &am65x_j721e_pruss_data, },
+ {},
+};
+MODULE_DEVICE_TABLE(of, pruss_of_match);
+
+static struct platform_driver pruss_driver = {
+ .driver = {
+ .name = "pruss",
+ .of_match_table = pruss_of_match,
+ },
+ .probe = pruss_probe,
+ .remove = pruss_remove,
+};
+module_platform_driver(pruss_driver);
+
+MODULE_AUTHOR("Suman Anna <s-anna@ti.com>");
+MODULE_DESCRIPTION("PRU-ICSS Subsystem Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/avs/smartreflex.c b/drivers/soc/ti/smartreflex.c
similarity index 100%
rename from drivers/power/avs/smartreflex.c
rename to drivers/soc/ti/smartreflex.c
diff --git a/drivers/soc/ti/ti_sci_pm_domains.c b/drivers/soc/ti/ti_sci_pm_domains.c
index 8c2a2f2..af2126d 100644
--- a/drivers/soc/ti/ti_sci_pm_domains.c
+++ b/drivers/soc/ti/ti_sci_pm_domains.c
@@ -9,7 +9,6 @@
#include <linux/err.h>
#include <linux/module.h>
-#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
@@ -18,150 +17,95 @@
#include <dt-bindings/soc/ti,sci_pm_domain.h>
/**
- * struct ti_sci_genpd_dev_data: holds data needed for every device attached
- * to this genpd
- * @idx: index of the device that identifies it with the system
- * control processor.
- * @exclusive: Permissions for exclusive request or shared request of the
- * device.
+ * struct ti_sci_genpd_provider: holds common TI SCI genpd provider data
+ * @ti_sci: handle to TI SCI protocol driver that provides ops to
+ * communicate with system control processor.
+ * @dev: pointer to dev for the driver for devm allocs
+ * @pd_list: list of all the power domains on the device
+ * @data: onecell data for genpd core
*/
-struct ti_sci_genpd_dev_data {
- int idx;
- u8 exclusive;
+struct ti_sci_genpd_provider {
+ const struct ti_sci_handle *ti_sci;
+ struct device *dev;
+ struct list_head pd_list;
+ struct genpd_onecell_data data;
};
/**
* struct ti_sci_pm_domain: TI specific data needed for power domain
- * @ti_sci: handle to TI SCI protocol driver that provides ops to
- * communicate with system control processor.
- * @dev: pointer to dev for the driver for devm allocs
+ * @idx: index of the device that identifies it with the system
+ * control processor.
+ * @exclusive: Permissions for exclusive request or shared request of the
+ * device.
* @pd: generic_pm_domain for use with the genpd framework
+ * @node: link for the genpd list
+ * @parent: link to the parent TI SCI genpd provider
*/
struct ti_sci_pm_domain {
- const struct ti_sci_handle *ti_sci;
- struct device *dev;
+ int idx;
+ u8 exclusive;
struct generic_pm_domain pd;
+ struct list_head node;
+ struct ti_sci_genpd_provider *parent;
};
#define genpd_to_ti_sci_pd(gpd) container_of(gpd, struct ti_sci_pm_domain, pd)
-/**
- * ti_sci_dev_id(): get prepopulated ti_sci id from struct dev
- * @dev: pointer to device associated with this genpd
- *
- * Returns device_id stored from ti,sci_id property
+/*
+ * ti_sci_pd_power_off(): genpd power down hook
+ * @domain: pointer to the powerdomain to power off
*/
-static int ti_sci_dev_id(struct device *dev)
+static int ti_sci_pd_power_off(struct generic_pm_domain *domain)
{
- struct generic_pm_domain_data *genpd_data = dev_gpd_data(dev);
- struct ti_sci_genpd_dev_data *sci_dev_data = genpd_data->data;
+ struct ti_sci_pm_domain *pd = genpd_to_ti_sci_pd(domain);
+ const struct ti_sci_handle *ti_sci = pd->parent->ti_sci;
- return sci_dev_data->idx;
+ return ti_sci->ops.dev_ops.put_device(ti_sci, pd->idx);
}
-static u8 is_ti_sci_dev_exclusive(struct device *dev)
-{
- struct generic_pm_domain_data *genpd_data = dev_gpd_data(dev);
- struct ti_sci_genpd_dev_data *sci_dev_data = genpd_data->data;
-
- return sci_dev_data->exclusive;
-}
-
-/**
- * ti_sci_dev_to_sci_handle(): get pointer to ti_sci_handle
- * @dev: pointer to device associated with this genpd
- *
- * Returns ti_sci_handle to be used to communicate with system
- * control processor.
+/*
+ * ti_sci_pd_power_on(): genpd power up hook
+ * @domain: pointer to the powerdomain to power on
*/
-static const struct ti_sci_handle *ti_sci_dev_to_sci_handle(struct device *dev)
+static int ti_sci_pd_power_on(struct generic_pm_domain *domain)
{
- struct generic_pm_domain *pd = pd_to_genpd(dev->pm_domain);
- struct ti_sci_pm_domain *ti_sci_genpd = genpd_to_ti_sci_pd(pd);
+ struct ti_sci_pm_domain *pd = genpd_to_ti_sci_pd(domain);
+ const struct ti_sci_handle *ti_sci = pd->parent->ti_sci;
- return ti_sci_genpd->ti_sci;
-}
-
-/**
- * ti_sci_dev_start(): genpd device start hook called to turn device on
- * @dev: pointer to device associated with this genpd to be powered on
- */
-static int ti_sci_dev_start(struct device *dev)
-{
- const struct ti_sci_handle *ti_sci = ti_sci_dev_to_sci_handle(dev);
- int idx = ti_sci_dev_id(dev);
-
- if (is_ti_sci_dev_exclusive(dev))
- return ti_sci->ops.dev_ops.get_device_exclusive(ti_sci, idx);
+ if (pd->exclusive)
+ return ti_sci->ops.dev_ops.get_device_exclusive(ti_sci,
+ pd->idx);
else
- return ti_sci->ops.dev_ops.get_device(ti_sci, idx);
+ return ti_sci->ops.dev_ops.get_device(ti_sci, pd->idx);
}
-/**
- * ti_sci_dev_stop(): genpd device stop hook called to turn device off
- * @dev: pointer to device associated with this genpd to be powered off
+/*
+ * ti_sci_pd_xlate(): translation service for TI SCI genpds
+ * @genpdspec: DT identification data for the genpd
+ * @data: genpd core data for all the powerdomains on the device
*/
-static int ti_sci_dev_stop(struct device *dev)
+static struct generic_pm_domain *ti_sci_pd_xlate(
+ struct of_phandle_args *genpdspec,
+ void *data)
{
- const struct ti_sci_handle *ti_sci = ti_sci_dev_to_sci_handle(dev);
- int idx = ti_sci_dev_id(dev);
+ struct genpd_onecell_data *genpd_data = data;
+ unsigned int idx = genpdspec->args[0];
- return ti_sci->ops.dev_ops.put_device(ti_sci, idx);
-}
+ if (genpdspec->args_count < 2)
+ return ERR_PTR(-EINVAL);
-static int ti_sci_pd_attach_dev(struct generic_pm_domain *domain,
- struct device *dev)
-{
- struct device_node *np = dev->of_node;
- struct of_phandle_args pd_args;
- struct ti_sci_pm_domain *ti_sci_genpd = genpd_to_ti_sci_pd(domain);
- const struct ti_sci_handle *ti_sci = ti_sci_genpd->ti_sci;
- struct ti_sci_genpd_dev_data *sci_dev_data;
- struct generic_pm_domain_data *genpd_data;
- int idx, ret = 0;
+ if (idx >= genpd_data->num_domains) {
+ pr_err("%s: invalid domain index %u\n", __func__, idx);
+ return ERR_PTR(-EINVAL);
+ }
- ret = of_parse_phandle_with_args(np, "power-domains",
- "#power-domain-cells", 0, &pd_args);
- if (ret < 0)
- return ret;
+ if (!genpd_data->domains[idx])
+ return ERR_PTR(-ENOENT);
- if (pd_args.args_count != 1 && pd_args.args_count != 2)
- return -EINVAL;
+ genpd_to_ti_sci_pd(genpd_data->domains[idx])->exclusive =
+ genpdspec->args[1];
- idx = pd_args.args[0];
-
- /*
- * Check the validity of the requested idx, if the index is not valid
- * the PMMC will return a NAK here and we will not allocate it.
- */
- ret = ti_sci->ops.dev_ops.is_valid(ti_sci, idx);
- if (ret)
- return -EINVAL;
-
- sci_dev_data = kzalloc(sizeof(*sci_dev_data), GFP_KERNEL);
- if (!sci_dev_data)
- return -ENOMEM;
-
- sci_dev_data->idx = idx;
- /* Enable the exclusive permissions by default */
- sci_dev_data->exclusive = TI_SCI_PD_EXCLUSIVE;
- if (pd_args.args_count == 2)
- sci_dev_data->exclusive = pd_args.args[1] & 0x1;
-
- genpd_data = dev_gpd_data(dev);
- genpd_data->data = sci_dev_data;
-
- return 0;
-}
-
-static void ti_sci_pd_detach_dev(struct generic_pm_domain *domain,
- struct device *dev)
-{
- struct generic_pm_domain_data *genpd_data = dev_gpd_data(dev);
- struct ti_sci_genpd_dev_data *sci_dev_data = genpd_data->data;
-
- kfree(sci_dev_data);
- genpd_data->data = NULL;
+ return genpd_data->domains[idx];
}
static const struct of_device_id ti_sci_pm_domain_matches[] = {
@@ -173,33 +117,80 @@ MODULE_DEVICE_TABLE(of, ti_sci_pm_domain_matches);
static int ti_sci_pm_domain_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct device_node *np = dev->of_node;
- struct ti_sci_pm_domain *ti_sci_pd;
+ struct ti_sci_genpd_provider *pd_provider;
+ struct ti_sci_pm_domain *pd;
+ struct device_node *np = NULL;
+ struct of_phandle_args args;
int ret;
+ u32 max_id = 0;
+ int index;
- ti_sci_pd = devm_kzalloc(dev, sizeof(*ti_sci_pd), GFP_KERNEL);
- if (!ti_sci_pd)
+ pd_provider = devm_kzalloc(dev, sizeof(*pd_provider), GFP_KERNEL);
+ if (!pd_provider)
return -ENOMEM;
- ti_sci_pd->ti_sci = devm_ti_sci_get_handle(dev);
- if (IS_ERR(ti_sci_pd->ti_sci))
- return PTR_ERR(ti_sci_pd->ti_sci);
+ pd_provider->ti_sci = devm_ti_sci_get_handle(dev);
+ if (IS_ERR(pd_provider->ti_sci))
+ return PTR_ERR(pd_provider->ti_sci);
- ti_sci_pd->dev = dev;
+ pd_provider->dev = dev;
- ti_sci_pd->pd.name = "ti_sci_pd";
+ INIT_LIST_HEAD(&pd_provider->pd_list);
- ti_sci_pd->pd.attach_dev = ti_sci_pd_attach_dev;
- ti_sci_pd->pd.detach_dev = ti_sci_pd_detach_dev;
+ /* Find highest device ID used for power domains */
+ while (1) {
+ np = of_find_node_with_property(np, "power-domains");
+ if (!np)
+ break;
- ti_sci_pd->pd.dev_ops.start = ti_sci_dev_start;
- ti_sci_pd->pd.dev_ops.stop = ti_sci_dev_stop;
+ index = 0;
- pm_genpd_init(&ti_sci_pd->pd, NULL, true);
+ while (1) {
+ ret = of_parse_phandle_with_args(np, "power-domains",
+ "#power-domain-cells",
+ index, &args);
+ if (ret)
+ break;
- ret = of_genpd_add_provider_simple(np, &ti_sci_pd->pd);
+ if (args.args_count >= 1 && args.np == dev->of_node) {
+ if (args.args[0] > max_id)
+ max_id = args.args[0];
- return ret;
+ pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+ if (!pd)
+ return -ENOMEM;
+
+ pd->pd.name = devm_kasprintf(dev, GFP_KERNEL,
+ "pd:%d",
+ args.args[0]);
+ if (!pd->pd.name)
+ return -ENOMEM;
+
+ pd->pd.power_off = ti_sci_pd_power_off;
+ pd->pd.power_on = ti_sci_pd_power_on;
+ pd->idx = args.args[0];
+ pd->parent = pd_provider;
+
+ pm_genpd_init(&pd->pd, NULL, true);
+
+ list_add(&pd->node, &pd_provider->pd_list);
+ }
+ index++;
+ }
+ }
+
+ pd_provider->data.domains =
+ devm_kcalloc(dev, max_id + 1,
+ sizeof(*pd_provider->data.domains),
+ GFP_KERNEL);
+
+ pd_provider->data.num_domains = max_id + 1;
+ pd_provider->data.xlate = ti_sci_pd_xlate;
+
+ list_for_each_entry(pd, &pd_provider->pd_list, node)
+ pd_provider->data.domains[pd->idx] = &pd->pd;
+
+ return of_genpd_add_provider_onecell(dev->of_node, &pd_provider->data);
}
static struct platform_driver ti_sci_pm_domains_driver = {
diff --git a/drivers/soc/versatile/soc-integrator.c b/drivers/soc/versatile/soc-integrator.c
index 7dcf77c..bab4ad8 100644
--- a/drivers/soc/versatile/soc-integrator.c
+++ b/drivers/soc/versatile/soc-integrator.c
@@ -100,7 +100,7 @@ ATTRIBUTE_GROUPS(integrator);
static int __init integrator_soc_init(void)
{
- static struct regmap *syscon_regmap;
+ struct regmap *syscon_regmap;
struct soc_device *soc_dev;
struct soc_device_attribute *soc_dev_attr;
struct device_node *np;
diff --git a/drivers/soc/xilinx/zynqmp_power.c b/drivers/soc/xilinx/zynqmp_power.c
index 31ff49f..c556623 100644
--- a/drivers/soc/xilinx/zynqmp_power.c
+++ b/drivers/soc/xilinx/zynqmp_power.c
@@ -205,7 +205,7 @@ static int zynqmp_pm_probe(struct platform_device *pdev)
rx_chan = mbox_request_channel_byname(client, "rx");
if (IS_ERR(rx_chan)) {
dev_err(&pdev->dev, "Failed to request rx channel\n");
- return IS_ERR(rx_chan);
+ return PTR_ERR(rx_chan);
}
} else if (of_find_property(pdev->dev.of_node, "interrupts", NULL)) {
irq = platform_get_irq(pdev, 0);
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index d2c976e..5cff60d 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -709,7 +709,7 @@
config SPI_S3C64XX
tristate "Samsung S3C64XX series type SPI"
- depends on (PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST)
+ depends on (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST)
help
SPI driver for Samsung S3C64XX and newer SoCs.
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 21dc758..6fea582 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -98,7 +98,6 @@
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o
-spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o
obj-$(CONFIG_SPI_SC18IS602) += spi-sc18is602.o
obj-$(CONFIG_SPI_SH) += spi-sh.o
diff --git a/arch/arm/plat-samsung/include/plat/regs-spi.h b/drivers/spi/spi-s3c24xx-regs.h
similarity index 88%
rename from arch/arm/plat-samsung/include/plat/regs-spi.h
rename to drivers/spi/spi-s3c24xx-regs.h
index 60784431..f51464a 100644
--- a/arch/arm/plat-samsung/include/plat/regs-spi.h
+++ b/drivers/spi/spi-s3c24xx-regs.h
@@ -5,11 +5,8 @@
* S3C2410 SPI register definition
*/
-#ifndef __ASM_ARCH_REGS_SPI_H
-#define __ASM_ARCH_REGS_SPI_H
-
-#define S3C2410_SPI1 (0x20)
-#define S3C2412_SPI1 (0x100)
+#ifndef __SPI_S3C2410_H
+#define __SPI_S3C2410_H
#define S3C2410_SPCON (0x00)
@@ -41,4 +38,4 @@
#define S3C2410_SPTDAT (0x10)
#define S3C2410_SPRDAT (0x14)
-#endif /* __ASM_ARCH_REGS_SPI_H */
+#endif /* __SPI_S3C2410_H */
diff --git a/drivers/spi/spi-s3c24xx.c b/drivers/spi/spi-s3c24xx.c
index 7742170..d6f5169 100644
--- a/drivers/spi/spi-s3c24xx.c
+++ b/drivers/spi/spi-s3c24xx.c
@@ -19,13 +19,12 @@
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/spi/s3c24xx.h>
+#include <linux/spi/s3c24xx-fiq.h>
#include <linux/module.h>
-#include <plat/regs-spi.h>
-
#include <asm/fiq.h>
-#include "spi-s3c24xx-fiq.h"
+#include "spi-s3c24xx-regs.h"
/**
* struct s3c24xx_spi_devstate - per device data
@@ -230,21 +229,6 @@ struct spi_fiq_code {
u8 data[];
};
-extern struct spi_fiq_code s3c24xx_spi_fiq_txrx;
-extern struct spi_fiq_code s3c24xx_spi_fiq_tx;
-extern struct spi_fiq_code s3c24xx_spi_fiq_rx;
-
-/**
- * ack_bit - turn IRQ into IRQ acknowledgement bit
- * @irq: The interrupt number
- *
- * Returns the bit to write to the interrupt acknowledge register.
- */
-static inline u32 ack_bit(unsigned int irq)
-{
- return 1 << (irq - IRQ_EINT0);
-}
-
/**
* s3c24xx_spi_tryfiq - attempt to claim and setup FIQ for transfer
* @hw: The hardware state.
@@ -261,6 +245,7 @@ static void s3c24xx_spi_tryfiq(struct s3c24xx_spi *hw)
struct pt_regs regs;
enum spi_fiq_mode mode;
struct spi_fiq_code *code;
+ u32 *ack_ptr = NULL;
int ret;
if (!hw->fiq_claimed) {
@@ -283,13 +268,10 @@ static void s3c24xx_spi_tryfiq(struct s3c24xx_spi *hw)
regs.uregs[fiq_rrx] = (long)hw->rx;
regs.uregs[fiq_rtx] = (long)hw->tx + 1;
regs.uregs[fiq_rcount] = hw->len - 1;
- regs.uregs[fiq_rirq] = (long)S3C24XX_VA_IRQ;
set_fiq_regs(®s);
if (hw->fiq_mode != mode) {
- u32 *ack_ptr;
-
hw->fiq_mode = mode;
switch (mode) {
@@ -309,12 +291,10 @@ static void s3c24xx_spi_tryfiq(struct s3c24xx_spi *hw)
BUG_ON(!code);
ack_ptr = (u32 *)&code->data[code->ack_offset];
- *ack_ptr = ack_bit(hw->irq);
-
set_fiq_handler(&code->data, code->length);
}
- s3c24xx_set_fiq(hw->irq, true);
+ s3c24xx_set_fiq(hw->irq, ack_ptr, true);
hw->fiq_mode = mode;
hw->fiq_inuse = 1;
diff --git a/drivers/target/target_core_rd.c b/drivers/target/target_core_rd.c
index 408bd97..bf936bb 100644
--- a/drivers/target/target_core_rd.c
+++ b/drivers/target/target_core_rd.c
@@ -131,7 +131,7 @@ static int rd_allocate_sgl_table(struct rd_dev *rd_dev, struct rd_dev_sg_table *
if (sg_per_table < total_sg_needed)
chain_entry = 1;
- sg = kcalloc(sg_per_table + chain_entry, sizeof(*sg),
+ sg = kmalloc_array(sg_per_table + chain_entry, sizeof(*sg),
GFP_KERNEL);
if (!sg)
return -ENOMEM;
diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
index b373b1b..cf4718c 100644
--- a/drivers/tee/optee/core.c
+++ b/drivers/tee/optee/core.c
@@ -216,6 +216,8 @@ static void optee_get_version(struct tee_device *teedev,
if (optee->sec_caps & OPTEE_SMC_SEC_CAP_DYNAMIC_SHM)
v.gen_caps |= TEE_GEN_CAP_REG_MEM;
+ if (optee->sec_caps & OPTEE_SMC_SEC_CAP_MEMREF_NULL)
+ v.gen_caps |= TEE_GEN_CAP_MEMREF_NULL;
*vers = v;
}
@@ -262,6 +264,11 @@ static int optee_open(struct tee_context *ctx)
mutex_init(&ctxdata->mutex);
INIT_LIST_HEAD(&ctxdata->sess_list);
+ if (optee->sec_caps & OPTEE_SMC_SEC_CAP_MEMREF_NULL)
+ ctx->cap_memref_null = true;
+ else
+ ctx->cap_memref_null = false;
+
ctx->data = ctxdata;
return 0;
}
diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h
index 795bc19..7b2d919 100644
--- a/drivers/tee/optee/optee_msg.h
+++ b/drivers/tee/optee/optee_msg.h
@@ -419,4 +419,25 @@ struct optee_msg_arg {
*/
#define OPTEE_MSG_RPC_CMD_SHM_FREE 7
+/*
+ * Access a device on an i2c bus
+ *
+ * [in] param[0].u.value.a mode: RD(0), WR(1)
+ * [in] param[0].u.value.b i2c adapter
+ * [in] param[0].u.value.c i2c chip
+ *
+ * [in] param[1].u.value.a i2c control flags
+ *
+ * [in/out] memref[2] buffer to exchange the transfer data
+ * with the secure world
+ *
+ * [out] param[3].u.value.a bytes transferred by the driver
+ */
+#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER 21
+/* I2C master transfer modes */
+#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD 0
+#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR 1
+/* I2C master control flags */
+#define OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT BIT(0)
+
#endif /* _OPTEE_MSG_H */
diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
index 8b71839..e25b216a 100644
--- a/drivers/tee/optee/optee_private.h
+++ b/drivers/tee/optee/optee_private.h
@@ -17,6 +17,7 @@
/* Some Global Platform error codes used in this driver */
#define TEEC_SUCCESS 0x00000000
#define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006
+#define TEEC_ERROR_NOT_SUPPORTED 0xFFFF000A
#define TEEC_ERROR_COMMUNICATION 0xFFFF000E
#define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C
#define TEEC_ERROR_SHORT_BUFFER 0xFFFF0010
diff --git a/drivers/tee/optee/optee_smc.h b/drivers/tee/optee/optee_smc.h
index c72122d..777ad54d 100644
--- a/drivers/tee/optee/optee_smc.h
+++ b/drivers/tee/optee/optee_smc.h
@@ -215,6 +215,9 @@ struct optee_smc_get_shm_config_result {
*/
#define OPTEE_SMC_SEC_CAP_DYNAMIC_SHM BIT(2)
+/* Secure world supports Shared Memory with a NULL buffer reference */
+#define OPTEE_SMC_SEC_CAP_MEMREF_NULL BIT(4)
+
#define OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES 9
#define OPTEE_SMC_EXCHANGE_CAPABILITIES \
OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES)
diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c
index b4ade54..1e3614e 100644
--- a/drivers/tee/optee/rpc.c
+++ b/drivers/tee/optee/rpc.c
@@ -7,6 +7,7 @@
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/tee_drv.h>
#include "optee_private.h"
@@ -49,6 +50,97 @@ static void handle_rpc_func_cmd_get_time(struct optee_msg_arg *arg)
arg->ret = TEEC_ERROR_BAD_PARAMETERS;
}
+#if IS_REACHABLE(CONFIG_I2C)
+static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx,
+ struct optee_msg_arg *arg)
+{
+ struct i2c_client client = { 0 };
+ struct tee_param *params;
+ size_t i;
+ int ret = -EOPNOTSUPP;
+ u8 attr[] = {
+ TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
+ TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
+ TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT,
+ TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT,
+ };
+
+ if (arg->num_params != ARRAY_SIZE(attr)) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ return;
+ }
+
+ params = kmalloc_array(arg->num_params, sizeof(struct tee_param),
+ GFP_KERNEL);
+ if (!params) {
+ arg->ret = TEEC_ERROR_OUT_OF_MEMORY;
+ return;
+ }
+
+ if (optee_from_msg_param(params, arg->num_params, arg->params))
+ goto bad;
+
+ for (i = 0; i < arg->num_params; i++) {
+ if (params[i].attr != attr[i])
+ goto bad;
+ }
+
+ client.adapter = i2c_get_adapter(params[0].u.value.b);
+ if (!client.adapter)
+ goto bad;
+
+ if (params[1].u.value.a & OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT) {
+ if (!i2c_check_functionality(client.adapter,
+ I2C_FUNC_10BIT_ADDR)) {
+ i2c_put_adapter(client.adapter);
+ goto bad;
+ }
+
+ client.flags = I2C_CLIENT_TEN;
+ }
+
+ client.addr = params[0].u.value.c;
+ snprintf(client.name, I2C_NAME_SIZE, "i2c%d", client.adapter->nr);
+
+ switch (params[0].u.value.a) {
+ case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD:
+ ret = i2c_master_recv(&client, params[2].u.memref.shm->kaddr,
+ params[2].u.memref.size);
+ break;
+ case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR:
+ ret = i2c_master_send(&client, params[2].u.memref.shm->kaddr,
+ params[2].u.memref.size);
+ break;
+ default:
+ i2c_put_adapter(client.adapter);
+ goto bad;
+ }
+
+ if (ret < 0) {
+ arg->ret = TEEC_ERROR_COMMUNICATION;
+ } else {
+ params[3].u.value.a = ret;
+ if (optee_to_msg_param(arg->params, arg->num_params, params))
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ else
+ arg->ret = TEEC_SUCCESS;
+ }
+
+ i2c_put_adapter(client.adapter);
+ kfree(params);
+ return;
+bad:
+ kfree(params);
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+}
+#else
+static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx,
+ struct optee_msg_arg *arg)
+{
+ arg->ret = TEEC_ERROR_NOT_SUPPORTED;
+}
+#endif
+
static struct wq_entry *wq_entry_get(struct optee_wait_queue *wq, u32 key)
{
struct wq_entry *w;
@@ -382,6 +474,9 @@ static void handle_rpc_func_cmd(struct tee_context *ctx, struct optee *optee,
case OPTEE_MSG_RPC_CMD_SHM_FREE:
handle_rpc_func_cmd_shm_free(ctx, arg);
break;
+ case OPTEE_MSG_RPC_CMD_I2C_TRANSFER:
+ handle_rpc_func_cmd_i2c_transfer(ctx, arg);
+ break;
default:
handle_rpc_supp_cmd(ctx, arg);
}
diff --git a/drivers/tee/tee_core.c b/drivers/tee/tee_core.c
index 64637e0..f53bf33 100644
--- a/drivers/tee/tee_core.c
+++ b/drivers/tee/tee_core.c
@@ -383,25 +383,38 @@ static int params_from_user(struct tee_context *ctx, struct tee_param *params,
case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT:
case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT:
/*
- * If we fail to get a pointer to a shared memory
- * object (and increase the ref count) from an
- * identifier we return an error. All pointers that
- * has been added in params have an increased ref
- * count. It's the callers responibility to do
- * tee_shm_put() on all resolved pointers.
+ * If a NULL pointer is passed to a TA in the TEE,
+ * the ip.c IOCTL parameters is set to TEE_MEMREF_NULL
+ * indicating a NULL memory reference.
*/
- shm = tee_shm_get_from_id(ctx, ip.c);
- if (IS_ERR(shm))
- return PTR_ERR(shm);
+ if (ip.c != TEE_MEMREF_NULL) {
+ /*
+ * If we fail to get a pointer to a shared
+ * memory object (and increase the ref count)
+ * from an identifier we return an error. All
+ * pointers that has been added in params have
+ * an increased ref count. It's the callers
+ * responibility to do tee_shm_put() on all
+ * resolved pointers.
+ */
+ shm = tee_shm_get_from_id(ctx, ip.c);
+ if (IS_ERR(shm))
+ return PTR_ERR(shm);
- /*
- * Ensure offset + size does not overflow offset
- * and does not overflow the size of the referred
- * shared memory object.
- */
- if ((ip.a + ip.b) < ip.a ||
- (ip.a + ip.b) > shm->size) {
- tee_shm_put(shm);
+ /*
+ * Ensure offset + size does not overflow
+ * offset and does not overflow the size of
+ * the referred shared memory object.
+ */
+ if ((ip.a + ip.b) < ip.a ||
+ (ip.a + ip.b) > shm->size) {
+ tee_shm_put(shm);
+ return -EINVAL;
+ }
+ } else if (ctx->cap_memref_null) {
+ /* Pass NULL pointer to OP-TEE */
+ shm = NULL;
+ } else {
return -EINVAL;
}
@@ -917,7 +930,6 @@ struct tee_device *tee_device_alloc(const struct tee_desc *teedesc,
cdev_init(&teedev->cdev, &tee_fops);
teedev->cdev.owner = teedesc->owner;
- teedev->cdev.kobj.parent = &teedev->dev.kobj;
dev_set_drvdata(&teedev->dev, driver_data);
device_initialize(&teedev->dev);
@@ -963,9 +975,7 @@ static struct attribute *tee_dev_attrs[] = {
NULL
};
-static const struct attribute_group tee_dev_group = {
- .attrs = tee_dev_attrs,
-};
+ATTRIBUTE_GROUPS(tee_dev);
/**
* tee_device_register() - Registers a TEE device
@@ -985,39 +995,19 @@ int tee_device_register(struct tee_device *teedev)
return -EINVAL;
}
- rc = cdev_add(&teedev->cdev, teedev->dev.devt, 1);
+ teedev->dev.groups = tee_dev_groups;
+
+ rc = cdev_device_add(&teedev->cdev, &teedev->dev);
if (rc) {
dev_err(&teedev->dev,
- "unable to cdev_add() %s, major %d, minor %d, err=%d\n",
+ "unable to cdev_device_add() %s, major %d, minor %d, err=%d\n",
teedev->name, MAJOR(teedev->dev.devt),
MINOR(teedev->dev.devt), rc);
return rc;
}
- rc = device_add(&teedev->dev);
- if (rc) {
- dev_err(&teedev->dev,
- "unable to device_add() %s, major %d, minor %d, err=%d\n",
- teedev->name, MAJOR(teedev->dev.devt),
- MINOR(teedev->dev.devt), rc);
- goto err_device_add;
- }
-
- rc = sysfs_create_group(&teedev->dev.kobj, &tee_dev_group);
- if (rc) {
- dev_err(&teedev->dev,
- "failed to create sysfs attributes, err=%d\n", rc);
- goto err_sysfs_create_group;
- }
-
teedev->flags |= TEE_DEVICE_FLAG_REGISTERED;
return 0;
-
-err_sysfs_create_group:
- device_del(&teedev->dev);
-err_device_add:
- cdev_del(&teedev->cdev);
- return rc;
}
EXPORT_SYMBOL_GPL(tee_device_register);
@@ -1060,11 +1050,8 @@ void tee_device_unregister(struct tee_device *teedev)
if (!teedev)
return;
- if (teedev->flags & TEE_DEVICE_FLAG_REGISTERED) {
- sysfs_remove_group(&teedev->dev.kobj, &tee_dev_group);
- cdev_del(&teedev->cdev);
- device_del(&teedev->dev);
- }
+ if (teedev->flags & TEE_DEVICE_FLAG_REGISTERED)
+ cdev_device_del(&teedev->cdev, &teedev->dev);
tee_device_put(teedev);
wait_for_completion(&teedev->c_no_users);
diff --git a/drivers/tee/tee_shm.c b/drivers/tee/tee_shm.c
index 827ac3d..00472f5 100644
--- a/drivers/tee/tee_shm.c
+++ b/drivers/tee/tee_shm.c
@@ -12,6 +12,22 @@
#include <linux/uio.h>
#include "tee_private.h"
+static void release_registered_pages(struct tee_shm *shm)
+{
+ if (shm->pages) {
+ if (shm->flags & TEE_SHM_USER_MAPPED) {
+ unpin_user_pages(shm->pages, shm->num_pages);
+ } else {
+ size_t n;
+
+ for (n = 0; n < shm->num_pages; n++)
+ put_page(shm->pages[n]);
+ }
+
+ kfree(shm->pages);
+ }
+}
+
static void tee_shm_release(struct tee_shm *shm)
{
struct tee_device *teedev = shm->ctx->teedev;
@@ -32,17 +48,13 @@ static void tee_shm_release(struct tee_shm *shm)
poolm->ops->free(poolm, shm);
} else if (shm->flags & TEE_SHM_REGISTER) {
- size_t n;
int rc = teedev->desc->ops->shm_unregister(shm->ctx, shm);
if (rc)
dev_err(teedev->dev.parent,
"unregister shm %p failed: %d", shm, rc);
- for (n = 0; n < shm->num_pages; n++)
- put_page(shm->pages[n]);
-
- kfree(shm->pages);
+ release_registered_pages(shm);
}
teedev_ctx_put(shm->ctx);
@@ -228,7 +240,7 @@ struct tee_shm *tee_shm_register(struct tee_context *ctx, unsigned long addr,
}
if (flags & TEE_SHM_USER_MAPPED) {
- rc = get_user_pages_fast(start, num_pages, FOLL_WRITE,
+ rc = pin_user_pages_fast(start, num_pages, FOLL_WRITE,
shm->pages);
} else {
struct kvec *kiov;
@@ -292,18 +304,12 @@ struct tee_shm *tee_shm_register(struct tee_context *ctx, unsigned long addr,
return shm;
err:
if (shm) {
- size_t n;
-
if (shm->id >= 0) {
mutex_lock(&teedev->mutex);
idr_remove(&teedev->idr, shm->id);
mutex_unlock(&teedev->mutex);
}
- if (shm->pages) {
- for (n = 0; n < shm->num_pages; n++)
- put_page(shm->pages[n]);
- kfree(shm->pages);
- }
+ release_registered_pages(shm);
}
kfree(shm);
teedev_ctx_put(ctx);
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 20b98a3..1044fc3 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -236,7 +236,7 @@
config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
- depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
select SERIAL_CORE
help
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c
index aaca1b0..7bd5182 100644
--- a/drivers/usb/gadget/udc/s3c-hsudc.c
+++ b/drivers/usb/gadget/udc/s3c-hsudc.c
@@ -30,8 +30,6 @@
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
-#include <mach/regs-s3c2443-clock.h>
-
#define S3C_HSUDC_REG(x) (x)
/* Non-Indexed Registers */
@@ -186,53 +184,6 @@ static inline void __orr32(void __iomem *ptr, u32 val)
writel(readl(ptr) | val, ptr);
}
-static void s3c_hsudc_init_phy(void)
-{
- u32 cfg;
-
- cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY;
- writel(cfg, S3C2443_PWRCFG);
-
- cfg = readl(S3C2443_URSTCON);
- cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
- writel(cfg, S3C2443_URSTCON);
- mdelay(1);
-
- cfg = readl(S3C2443_URSTCON);
- cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
- writel(cfg, S3C2443_URSTCON);
-
- cfg = readl(S3C2443_PHYCTRL);
- cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT);
- cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL);
- writel(cfg, S3C2443_PHYCTRL);
-
- cfg = readl(S3C2443_PHYPWR);
- cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN |
- S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK |
- S3C2443_PHYPWR_ANALOG_PD);
- cfg |= S3C2443_PHYPWR_COMMON_ON;
- writel(cfg, S3C2443_PHYPWR);
-
- cfg = readl(S3C2443_UCLKCON);
- cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN |
- S3C2443_UCLKCON_TCLKEN);
- writel(cfg, S3C2443_UCLKCON);
-}
-
-static void s3c_hsudc_uninit_phy(void)
-{
- u32 cfg;
-
- cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY;
- writel(cfg, S3C2443_PWRCFG);
-
- writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR);
-
- cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN;
- writel(cfg, S3C2443_UCLKCON);
-}
-
/**
* s3c_hsudc_complete_request - Complete a transfer request.
* @hsep: Endpoint to which the request belongs.
@@ -1188,7 +1139,8 @@ static int s3c_hsudc_start(struct usb_gadget *gadget,
pm_runtime_get_sync(hsudc->dev);
- s3c_hsudc_init_phy();
+ if (hsudc->pd->phy_init)
+ hsudc->pd->phy_init();
if (hsudc->pd->gpio_init)
hsudc->pd->gpio_init();
@@ -1210,7 +1162,8 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget)
spin_lock_irqsave(&hsudc->lock, flags);
hsudc->gadget.speed = USB_SPEED_UNKNOWN;
- s3c_hsudc_uninit_phy();
+ if (hsudc->pd->phy_uninit)
+ hsudc->pd->phy_uninit();
pm_runtime_put(hsudc->dev);
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c
index e875a0b..f1ea514 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.c
+++ b/drivers/usb/gadget/udc/s3c2410_udc.c
@@ -36,15 +36,11 @@
#include <asm/byteorder.h>
#include <asm/irq.h>
#include <asm/unaligned.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-
-#include <plat/regs-udc.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
-
#include "s3c2410_udc.h"
+#include "s3c2410_udc_regs.h"
#define DRIVER_DESC "S3C2410 USB Device Controller Gadget"
#define DRIVER_AUTHOR "Herbert Pötzl <herbert@13thfloor.at>, " \
@@ -57,6 +53,7 @@ static struct s3c2410_udc *the_controller;
static struct clk *udc_clock;
static struct clk *usb_bus_clock;
static void __iomem *base_addr;
+static int irq_usbd;
static u64 rsrc_start;
static u64 rsrc_len;
static struct dentry *s3c2410_udc_debugfs_root;
@@ -835,8 +832,6 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
}
}
-#include <mach/regs-irq.h>
-
/*
* s3c2410_udc_irq - interrupt handler
*/
@@ -977,7 +972,7 @@ static irqreturn_t s3c2410_udc_irq(int dummy, void *_dev)
}
}
- dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", IRQ_USBD);
+ dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", irq_usbd);
/* Restore old index */
udc_write(idx, S3C2410_UDC_INDEX_REG);
@@ -1777,13 +1772,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
spin_lock_init(&udc->lock);
udc_info = dev_get_platdata(&pdev->dev);
- rsrc_start = S3C2410_PA_USBDEV;
- rsrc_len = S3C24XX_SZ_USBDEV;
-
- if (!request_mem_region(rsrc_start, rsrc_len, gadget_name))
- return -EBUSY;
-
- base_addr = ioremap(rsrc_start, rsrc_len);
+ base_addr = devm_platform_ioremap_resource(pdev, 0);
if (!base_addr) {
retval = -ENOMEM;
goto err_mem;
@@ -1795,17 +1784,19 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
s3c2410_udc_disable(udc);
s3c2410_udc_reinit(udc);
+ irq_usbd = platform_get_irq(pdev, 0);
+
/* irq setup after old hardware state is cleaned up */
- retval = request_irq(IRQ_USBD, s3c2410_udc_irq,
+ retval = request_irq(irq_usbd, s3c2410_udc_irq,
0, gadget_name, udc);
if (retval != 0) {
- dev_err(dev, "cannot get irq %i, err %d\n", IRQ_USBD, retval);
+ dev_err(dev, "cannot get irq %i, err %d\n", irq_usbd, retval);
retval = -EBUSY;
goto err_map;
}
- dev_dbg(dev, "got irq %i\n", IRQ_USBD);
+ dev_dbg(dev, "got irq %i\n", irq_usbd);
if (udc_info && udc_info->vbus_pin > 0) {
retval = gpio_request(udc_info->vbus_pin, "udc vbus");
@@ -1872,7 +1863,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
if (udc_info && udc_info->vbus_pin > 0)
gpio_free(udc_info->vbus_pin);
err_int:
- free_irq(IRQ_USBD, udc);
+ free_irq(irq_usbd, udc);
err_map:
iounmap(base_addr);
err_mem:
@@ -1906,7 +1897,7 @@ static int s3c2410_udc_remove(struct platform_device *pdev)
free_irq(irq, udc);
}
- free_irq(IRQ_USBD, udc);
+ free_irq(irq_usbd, udc);
iounmap(base_addr);
release_mem_region(rsrc_start, rsrc_len);
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.h b/drivers/usb/gadget/udc/s3c2410_udc.h
index bdcaa8d..68bdf3e 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.h
+++ b/drivers/usb/gadget/udc/s3c2410_udc.h
@@ -90,6 +90,7 @@ struct s3c2410_udc {
unsigned req_pending : 1;
u8 vbus;
struct dentry *regs_info;
+ int irq;
};
#define to_s3c2410(g) (container_of((g), struct s3c2410_udc, gadget))
diff --git a/arch/arm/plat-samsung/include/plat/regs-udc.h b/drivers/usb/gadget/udc/s3c2410_udc_regs.h
similarity index 100%
rename from arch/arm/plat-samsung/include/plat/regs-udc.h
rename to drivers/usb/gadget/udc/s3c2410_udc_regs.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h b/drivers/video/fbdev/s3c2410fb-regs-lcd.h
similarity index 83%
rename from arch/arm/mach-s3c24xx/include/mach/regs-lcd.h
rename to drivers/video/fbdev/s3c2410fb-regs-lcd.h
index 4c3434f..1e46f7a 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h
+++ b/drivers/video/fbdev/s3c2410fb-regs-lcd.h
@@ -7,6 +7,13 @@
#ifndef ___ASM_ARCH_REGS_LCD_H
#define ___ASM_ARCH_REGS_LCD_H
+/*
+ * a couple of values are used as platform data in
+ * include/linux/platform_data/fb-s3c2410.h and not
+ * duplicated here.
+ */
+#include <linux/platform_data/fb-s3c2410.h>
+
#define S3C2410_LCDREG(x) (x)
/* LCD control registers */
@@ -29,13 +36,6 @@
#define S3C2410_LCDCON1_STN8BPP (3<<1)
#define S3C2410_LCDCON1_STN12BPP (4<<1)
-#define S3C2410_LCDCON1_TFT1BPP (8<<1)
-#define S3C2410_LCDCON1_TFT2BPP (9<<1)
-#define S3C2410_LCDCON1_TFT4BPP (10<<1)
-#define S3C2410_LCDCON1_TFT8BPP (11<<1)
-#define S3C2410_LCDCON1_TFT16BPP (12<<1)
-#define S3C2410_LCDCON1_TFT24BPP (13<<1)
-
#define S3C2410_LCDCON1_ENVID (1)
#define S3C2410_LCDCON1_MODEMASK 0x1E
@@ -66,20 +66,6 @@
#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >> 0) & 0xFF)
-#define S3C2410_LCDCON5_BPP24BL (1<<12)
-#define S3C2410_LCDCON5_FRM565 (1<<11)
-#define S3C2410_LCDCON5_INVVCLK (1<<10)
-#define S3C2410_LCDCON5_INVVLINE (1<<9)
-#define S3C2410_LCDCON5_INVVFRAME (1<<8)
-#define S3C2410_LCDCON5_INVVD (1<<7)
-#define S3C2410_LCDCON5_INVVDEN (1<<6)
-#define S3C2410_LCDCON5_INVPWREN (1<<5)
-#define S3C2410_LCDCON5_INVLEND (1<<4)
-#define S3C2410_LCDCON5_PWREN (1<<3)
-#define S3C2410_LCDCON5_ENLEND (1<<2)
-#define S3C2410_LCDCON5_BSWP (1<<1)
-#define S3C2410_LCDCON5_HWSWP (1<<0)
-
/* framebuffer start addressed */
#define S3C2410_LCDSADDR1 S3C2410_LCDREG(0x14)
#define S3C2410_LCDSADDR2 S3C2410_LCDREG(0x18)
diff --git a/drivers/video/fbdev/s3c2410fb.c b/drivers/video/fbdev/s3c2410fb.c
index 6f8fa50..d8ae525 100644
--- a/drivers/video/fbdev/s3c2410fb.c
+++ b/drivers/video/fbdev/s3c2410fb.c
@@ -29,19 +29,18 @@
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/io.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <asm/div64.h>
#include <asm/mach/map.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-gpio.h>
-#include <mach/fb.h>
#ifdef CONFIG_PM
#include <linux/pm.h>
#endif
#include "s3c2410fb.h"
+#include "s3c2410fb-regs-lcd.h"
/* Debugging stuff */
static int debug = IS_BUILTIN(CONFIG_FB_S3C2410_DEBUG);
@@ -672,6 +671,9 @@ static inline void modify_gpio(void __iomem *reg,
{
unsigned long tmp;
+ if (!reg)
+ return;
+
tmp = readl(reg) & ~mask;
writel(tmp | set, reg);
}
@@ -702,10 +704,10 @@ static int s3c2410fb_init_registers(struct fb_info *info)
/* modify the gpio(s) with interrupts set (bjd) */
- modify_gpio(S3C2410_GPCUP, mach_info->gpcup, mach_info->gpcup_mask);
- modify_gpio(S3C2410_GPCCON, mach_info->gpccon, mach_info->gpccon_mask);
- modify_gpio(S3C2410_GPDUP, mach_info->gpdup, mach_info->gpdup_mask);
- modify_gpio(S3C2410_GPDCON, mach_info->gpdcon, mach_info->gpdcon_mask);
+ modify_gpio(mach_info->gpcup_reg, mach_info->gpcup, mach_info->gpcup_mask);
+ modify_gpio(mach_info->gpccon_reg, mach_info->gpccon, mach_info->gpccon_mask);
+ modify_gpio(mach_info->gpdup_reg, mach_info->gpdup, mach_info->gpdup_mask);
+ modify_gpio(mach_info->gpdcon_reg, mach_info->gpdcon, mach_info->gpdcon_mask);
local_irq_restore(flags);
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 21865e2..fd79686 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -489,16 +489,10 @@
Say N if you are unsure.
-config HAVE_S3C2410_WATCHDOG
- bool
- help
- This will include watchdog timer support for Samsung SoCs. If
- you want to include watchdog support for any machine, kindly
- select this in the respective mach-XXXX/Kconfig file.
-
config S3C2410_WATCHDOG
tristate "S3C2410 Watchdog"
- depends on HAVE_S3C2410_WATCHDOG || COMPILE_TEST
+ depends on ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || \
+ COMPILE_TEST
select WATCHDOG_CORE
select MFD_SYSCON if ARCH_EXYNOS
help
diff --git a/drivers/xen/events/events_2l.c b/drivers/xen/events/events_2l.c
index fe5ad0e..da87f3a 100644
--- a/drivers/xen/events/events_2l.c
+++ b/drivers/xen/events/events_2l.c
@@ -47,10 +47,11 @@ static unsigned evtchn_2l_max_channels(void)
return EVTCHN_2L_NR_CHANNELS;
}
-static void evtchn_2l_bind_to_cpu(struct irq_info *info, unsigned cpu)
+static void evtchn_2l_bind_to_cpu(evtchn_port_t evtchn, unsigned int cpu,
+ unsigned int old_cpu)
{
- clear_bit(info->evtchn, BM(per_cpu(cpu_evtchn_mask, info->cpu)));
- set_bit(info->evtchn, BM(per_cpu(cpu_evtchn_mask, cpu)));
+ clear_bit(evtchn, BM(per_cpu(cpu_evtchn_mask, old_cpu)));
+ set_bit(evtchn, BM(per_cpu(cpu_evtchn_mask, cpu)));
}
static void evtchn_2l_clear_pending(evtchn_port_t port)
diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c
index cc31773..6038c4c 100644
--- a/drivers/xen/events/events_base.c
+++ b/drivers/xen/events/events_base.c
@@ -70,6 +70,57 @@
#undef MODULE_PARAM_PREFIX
#define MODULE_PARAM_PREFIX "xen."
+/* Interrupt types. */
+enum xen_irq_type {
+ IRQT_UNBOUND = 0,
+ IRQT_PIRQ,
+ IRQT_VIRQ,
+ IRQT_IPI,
+ IRQT_EVTCHN
+};
+
+/*
+ * Packed IRQ information:
+ * type - enum xen_irq_type
+ * event channel - irq->event channel mapping
+ * cpu - cpu this event channel is bound to
+ * index - type-specific information:
+ * PIRQ - vector, with MSB being "needs EIO", or physical IRQ of the HVM
+ * guest, or GSI (real passthrough IRQ) of the device.
+ * VIRQ - virq number
+ * IPI - IPI vector
+ * EVTCHN -
+ */
+struct irq_info {
+ struct list_head list;
+ struct list_head eoi_list;
+ short refcnt;
+ short spurious_cnt;
+ enum xen_irq_type type; /* type */
+ unsigned irq;
+ evtchn_port_t evtchn; /* event channel */
+ unsigned short cpu; /* cpu bound */
+ unsigned short eoi_cpu; /* EOI must happen on this cpu-1 */
+ unsigned int irq_epoch; /* If eoi_cpu valid: irq_epoch of event */
+ u64 eoi_time; /* Time in jiffies when to EOI. */
+
+ union {
+ unsigned short virq;
+ enum ipi_vector ipi;
+ struct {
+ unsigned short pirq;
+ unsigned short gsi;
+ unsigned char vector;
+ unsigned char flags;
+ uint16_t domid;
+ } pirq;
+ } u;
+};
+
+#define PIRQ_NEEDS_EOI (1 << 0)
+#define PIRQ_SHAREABLE (1 << 1)
+#define PIRQ_MSI_GROUP (1 << 2)
+
static uint __read_mostly event_loop_timeout = 2;
module_param(event_loop_timeout, uint, 0644);
@@ -110,7 +161,7 @@ static DEFINE_PER_CPU(int [NR_VIRQS], virq_to_irq) = {[0 ... NR_VIRQS-1] = -1};
/* IRQ <-> IPI mapping */
static DEFINE_PER_CPU(int [XEN_NR_IPIS], ipi_to_irq) = {[0 ... XEN_NR_IPIS-1] = -1};
-int **evtchn_to_irq;
+static int **evtchn_to_irq;
#ifdef CONFIG_X86
static unsigned long *pirq_eoi_map;
#endif
@@ -190,7 +241,7 @@ int get_evtchn_to_irq(evtchn_port_t evtchn)
}
/* Get info for IRQ */
-struct irq_info *info_for_irq(unsigned irq)
+static struct irq_info *info_for_irq(unsigned irq)
{
if (irq < nr_legacy_irqs())
return legacy_info_ptrs[irq];
@@ -228,7 +279,7 @@ static int xen_irq_info_common_setup(struct irq_info *info,
irq_clear_status_flags(irq, IRQ_NOREQUEST|IRQ_NOAUTOEN);
- return xen_evtchn_port_setup(info);
+ return xen_evtchn_port_setup(evtchn);
}
static int xen_irq_info_evtchn_setup(unsigned irq,
@@ -351,7 +402,7 @@ static enum xen_irq_type type_from_irq(unsigned irq)
return info_for_irq(irq)->type;
}
-unsigned cpu_from_irq(unsigned irq)
+static unsigned cpu_from_irq(unsigned irq)
{
return info_for_irq(irq)->cpu;
}
@@ -391,7 +442,7 @@ static void bind_evtchn_to_cpu(evtchn_port_t evtchn, unsigned int cpu)
#ifdef CONFIG_SMP
cpumask_copy(irq_get_affinity_mask(irq), cpumask_of(cpu));
#endif
- xen_evtchn_port_bind_to_cpu(info, cpu);
+ xen_evtchn_port_bind_to_cpu(evtchn, cpu, info->cpu);
info->cpu = cpu;
}
@@ -745,7 +796,7 @@ static unsigned int __startup_pirq(unsigned int irq)
info->evtchn = evtchn;
bind_evtchn_to_cpu(evtchn, 0);
- rc = xen_evtchn_port_setup(info);
+ rc = xen_evtchn_port_setup(evtchn);
if (rc)
goto err;
@@ -1145,14 +1196,6 @@ static int bind_interdomain_evtchn_to_irq_chip(unsigned int remote_domain,
chip);
}
-int bind_interdomain_evtchn_to_irq(unsigned int remote_domain,
- evtchn_port_t remote_port)
-{
- return bind_interdomain_evtchn_to_irq_chip(remote_domain, remote_port,
- &xen_dynamic_chip);
-}
-EXPORT_SYMBOL_GPL(bind_interdomain_evtchn_to_irq);
-
int bind_interdomain_evtchn_to_irq_lateeoi(unsigned int remote_domain,
evtchn_port_t remote_port)
{
@@ -1320,19 +1363,6 @@ static int bind_interdomain_evtchn_to_irqhandler_chip(
return irq;
}
-int bind_interdomain_evtchn_to_irqhandler(unsigned int remote_domain,
- evtchn_port_t remote_port,
- irq_handler_t handler,
- unsigned long irqflags,
- const char *devname,
- void *dev_id)
-{
- return bind_interdomain_evtchn_to_irqhandler_chip(remote_domain,
- remote_port, handler, irqflags, devname,
- dev_id, &xen_dynamic_chip);
-}
-EXPORT_SYMBOL_GPL(bind_interdomain_evtchn_to_irqhandler);
-
int bind_interdomain_evtchn_to_irqhandler_lateeoi(unsigned int remote_domain,
evtchn_port_t remote_port,
irq_handler_t handler,
@@ -2020,8 +2050,8 @@ void xen_setup_callback_vector(void) {}
static inline void xen_alloc_callback_vector(void) {}
#endif
-static bool fifo_events = true;
-module_param(fifo_events, bool, 0);
+bool xen_fifo_events = true;
+module_param_named(fifo_events, xen_fifo_events, bool, 0);
static int xen_evtchn_cpu_prepare(unsigned int cpu)
{
@@ -2050,10 +2080,12 @@ void __init xen_init_IRQ(void)
int ret = -EINVAL;
evtchn_port_t evtchn;
- if (fifo_events)
+ if (xen_fifo_events)
ret = xen_evtchn_fifo_init();
- if (ret < 0)
+ if (ret < 0) {
xen_evtchn_2l_init();
+ xen_fifo_events = false;
+ }
xen_cpu_init_eoi(smp_processor_id());
diff --git a/drivers/xen/events/events_fifo.c b/drivers/xen/events/events_fifo.c
index 6085a80..b234f17 100644
--- a/drivers/xen/events/events_fifo.c
+++ b/drivers/xen/events/events_fifo.c
@@ -138,9 +138,8 @@ static void init_array_page(event_word_t *array_page)
array_page[i] = 1 << EVTCHN_FIFO_MASKED;
}
-static int evtchn_fifo_setup(struct irq_info *info)
+static int evtchn_fifo_setup(evtchn_port_t port)
{
- evtchn_port_t port = info->evtchn;
unsigned new_array_pages;
int ret;
@@ -186,7 +185,8 @@ static int evtchn_fifo_setup(struct irq_info *info)
return ret;
}
-static void evtchn_fifo_bind_to_cpu(struct irq_info *info, unsigned cpu)
+static void evtchn_fifo_bind_to_cpu(evtchn_port_t evtchn, unsigned int cpu,
+ unsigned int old_cpu)
{
/* no-op */
}
@@ -237,6 +237,9 @@ static bool clear_masked_cond(volatile event_word_t *word)
w = *word;
do {
+ if (!(w & (1 << EVTCHN_FIFO_MASKED)))
+ return true;
+
if (w & (1 << EVTCHN_FIFO_PENDING))
return false;
diff --git a/drivers/xen/events/events_internal.h b/drivers/xen/events/events_internal.h
index 82937d9..0a97c054 100644
--- a/drivers/xen/events/events_internal.h
+++ b/drivers/xen/events/events_internal.h
@@ -7,65 +7,15 @@
#ifndef __EVENTS_INTERNAL_H__
#define __EVENTS_INTERNAL_H__
-/* Interrupt types. */
-enum xen_irq_type {
- IRQT_UNBOUND = 0,
- IRQT_PIRQ,
- IRQT_VIRQ,
- IRQT_IPI,
- IRQT_EVTCHN
-};
-
-/*
- * Packed IRQ information:
- * type - enum xen_irq_type
- * event channel - irq->event channel mapping
- * cpu - cpu this event channel is bound to
- * index - type-specific information:
- * PIRQ - vector, with MSB being "needs EIO", or physical IRQ of the HVM
- * guest, or GSI (real passthrough IRQ) of the device.
- * VIRQ - virq number
- * IPI - IPI vector
- * EVTCHN -
- */
-struct irq_info {
- struct list_head list;
- struct list_head eoi_list;
- short refcnt;
- short spurious_cnt;
- enum xen_irq_type type; /* type */
- unsigned irq;
- evtchn_port_t evtchn; /* event channel */
- unsigned short cpu; /* cpu bound */
- unsigned short eoi_cpu; /* EOI must happen on this cpu */
- unsigned int irq_epoch; /* If eoi_cpu valid: irq_epoch of event */
- u64 eoi_time; /* Time in jiffies when to EOI. */
-
- union {
- unsigned short virq;
- enum ipi_vector ipi;
- struct {
- unsigned short pirq;
- unsigned short gsi;
- unsigned char vector;
- unsigned char flags;
- uint16_t domid;
- } pirq;
- } u;
-};
-
-#define PIRQ_NEEDS_EOI (1 << 0)
-#define PIRQ_SHAREABLE (1 << 1)
-#define PIRQ_MSI_GROUP (1 << 2)
-
struct evtchn_loop_ctrl;
struct evtchn_ops {
unsigned (*max_channels)(void);
unsigned (*nr_channels)(void);
- int (*setup)(struct irq_info *info);
- void (*bind_to_cpu)(struct irq_info *info, unsigned cpu);
+ int (*setup)(evtchn_port_t port);
+ void (*bind_to_cpu)(evtchn_port_t evtchn, unsigned int cpu,
+ unsigned int old_cpu);
void (*clear_pending)(evtchn_port_t port);
void (*set_pending)(evtchn_port_t port);
@@ -83,12 +33,9 @@ struct evtchn_ops {
extern const struct evtchn_ops *evtchn_ops;
-extern int **evtchn_to_irq;
int get_evtchn_to_irq(evtchn_port_t evtchn);
void handle_irq_for_port(evtchn_port_t port, struct evtchn_loop_ctrl *ctrl);
-struct irq_info *info_for_irq(unsigned irq);
-unsigned cpu_from_irq(unsigned irq);
unsigned int cpu_from_evtchn(evtchn_port_t evtchn);
static inline unsigned xen_evtchn_max_channels(void)
@@ -100,17 +47,18 @@ static inline unsigned xen_evtchn_max_channels(void)
* Do any ABI specific setup for a bound event channel before it can
* be unmasked and used.
*/
-static inline int xen_evtchn_port_setup(struct irq_info *info)
+static inline int xen_evtchn_port_setup(evtchn_port_t evtchn)
{
if (evtchn_ops->setup)
- return evtchn_ops->setup(info);
+ return evtchn_ops->setup(evtchn);
return 0;
}
-static inline void xen_evtchn_port_bind_to_cpu(struct irq_info *info,
- unsigned cpu)
+static inline void xen_evtchn_port_bind_to_cpu(evtchn_port_t evtchn,
+ unsigned int cpu,
+ unsigned int old_cpu)
{
- evtchn_ops->bind_to_cpu(info, cpu);
+ evtchn_ops->bind_to_cpu(evtchn, cpu, old_cpu);
}
static inline void clear_evtchn(evtchn_port_t port)
diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index e34fa20..9a21269 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -260,8 +260,7 @@ static int v9fs_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_bavail = rs.bavail;
buf->f_files = rs.files;
buf->f_ffree = rs.ffree;
- buf->f_fsid.val[0] = rs.fsid & 0xFFFFFFFFUL;
- buf->f_fsid.val[1] = (rs.fsid >> 32) & 0xFFFFFFFFUL;
+ buf->f_fsid = u64_to_fsid(rs.fsid);
buf->f_namelen = rs.namelen;
}
if (res != -ENOSYS)
diff --git a/fs/adfs/super.c b/fs/adfs/super.c
index d553bb5..bdbd26e 100644
--- a/fs/adfs/super.c
+++ b/fs/adfs/super.c
@@ -210,8 +210,7 @@ static int adfs_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_namelen = sbi->s_namelen;
buf->f_bsize = sb->s_blocksize;
buf->f_ffree = (long)(buf->f_bfree * buf->f_files) / (long)buf->f_blocks;
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
return 0;
}
diff --git a/fs/affs/super.c b/fs/affs/super.c
index a100cd9..c6c2a51 100644
--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -620,8 +620,7 @@ affs_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_blocks = AFFS_SB(sb)->s_partition_size - AFFS_SB(sb)->s_reserved;
buf->f_bfree = free;
buf->f_bavail = free;
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
buf->f_namelen = AFFSNAMEMAX;
return 0;
}
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 2482032..c1ba13d 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -963,8 +963,7 @@ befs_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_bavail = buf->f_bfree;
buf->f_files = 0; /* UNKNOWN */
buf->f_ffree = 0; /* UNKNOWN */
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
buf->f_namelen = BEFS_NAME_LEN;
befs_debug(sb, "<--- %s", __func__);
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index f8ce136..3ac7611 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -229,8 +229,7 @@ static int bfs_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_bfree = buf->f_bavail = info->si_freeb;
buf->f_files = info->si_lasti + 1 - BFS_ROOT_INO;
buf->f_ffree = info->si_freei;
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
buf->f_namelen = BFS_NAMELEN;
return 0;
}
diff --git a/fs/ceph/super.c b/fs/ceph/super.c
index 2516304..33ba6f0 100644
--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -104,8 +104,7 @@ static int ceph_statfs(struct dentry *dentry, struct kstatfs *buf)
le64_to_cpu(*((__le64 *)&monc->monmap->fsid + 1));
mutex_unlock(&monc->mutex);
- buf->f_fsid.val[0] = fsid & 0xffffffff;
- buf->f_fsid.val[1] = fsid >> 32;
+ buf->f_fsid = u64_to_fsid(fsid);
return 0;
}
diff --git a/fs/cramfs/inode.c b/fs/cramfs/inode.c
index 9123086..4b90cfd 100644
--- a/fs/cramfs/inode.c
+++ b/fs/cramfs/inode.c
@@ -690,8 +690,7 @@ static int cramfs_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_bavail = 0;
buf->f_files = CRAMFS_SB(sb)->files;
buf->f_ffree = 0;
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
buf->f_namelen = CRAMFS_MAXPATHLEN;
return 0;
}
diff --git a/fs/efs/super.c b/fs/efs/super.c
index a4a945d..62b155b 100644
--- a/fs/efs/super.c
+++ b/fs/efs/super.c
@@ -342,8 +342,7 @@ static int efs_statfs(struct dentry *dentry, struct kstatfs *buf) {
sbi->inode_blocks *
(EFS_BLOCKSIZE / sizeof(struct efs_dinode));
buf->f_ffree = sbi->inode_free; /* free inodes */
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
buf->f_namelen = EFS_MAXNAMELEN; /* max filename length */
return 0;
diff --git a/fs/erofs/super.c b/fs/erofs/super.c
index b9a0980..be10b16 100644
--- a/fs/erofs/super.c
+++ b/fs/erofs/super.c
@@ -561,8 +561,7 @@ static int erofs_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_namelen = EROFS_NAME_LEN;
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
return 0;
}
diff --git a/fs/exfat/super.c b/fs/exfat/super.c
index 3ffdce5..87be5bf 100644
--- a/fs/exfat/super.c
+++ b/fs/exfat/super.c
@@ -89,8 +89,7 @@ static int exfat_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_blocks = sbi->num_clusters - 2; /* clu 0 & 1 */
buf->f_bfree = buf->f_blocks - sbi->used_clusters;
buf->f_bavail = buf->f_bfree;
- buf->f_fsid.val[0] = (unsigned int)id;
- buf->f_fsid.val[1] = (unsigned int)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
/* Unicode utf16 255 characters */
buf->f_namelen = EXFAT_MAX_FILE_LEN * NLS_MAX_CHARSET_SIZE;
return 0;
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index 7fab2b3..09f1fe6 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -1455,8 +1455,7 @@ static int ext2_statfs (struct dentry * dentry, struct kstatfs * buf)
buf->f_namelen = EXT2_NAME_LEN;
fsid = le64_to_cpup((void *)es->s_uuid) ^
le64_to_cpup((void *)es->s_uuid + sizeof(u64));
- buf->f_fsid.val[0] = fsid & 0xFFFFFFFFUL;
- buf->f_fsid.val[1] = (fsid >> 32) & 0xFFFFFFFFUL;
+ buf->f_fsid = u64_to_fsid(fsid);
spin_unlock(&sbi->s_lock);
return 0;
}
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 0337347..2fe141ff 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -6144,8 +6144,7 @@ static int ext4_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_namelen = EXT4_NAME_LEN;
fsid = le64_to_cpup((void *)es->s_uuid) ^
le64_to_cpup((void *)es->s_uuid + sizeof(u64));
- buf->f_fsid.val[0] = fsid & 0xFFFFFFFFUL;
- buf->f_fsid.val[1] = (fsid >> 32) & 0xFFFFFFFFUL;
+ buf->f_fsid = u64_to_fsid(fsid);
#ifdef CONFIG_QUOTA
if (ext4_test_inode_flag(dentry->d_inode, EXT4_INODE_PROJINHERIT) &&
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 0c958fe..00eff2f 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -1442,8 +1442,7 @@ static int f2fs_statfs(struct dentry *dentry, struct kstatfs *buf)
}
buf->f_namelen = F2FS_NAME_LEN;
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
#ifdef CONFIG_QUOTA
if (is_inode_flag_set(dentry->d_inode, FI_PROJ_INHERIT) &&
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index a0cf99d..bab9b20 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -836,8 +836,7 @@ static int fat_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_blocks = sbi->max_cluster - FAT_START_ENT;
buf->f_bfree = sbi->free_clusters;
buf->f_bavail = sbi->free_clusters;
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
buf->f_namelen =
(sbi->options.isvfat ? FAT_LFN_LEN : 12) * NLS_MAX_CHARSET_SIZE;
diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c
index d4af283..9cd2eca 100644
--- a/fs/gfs2/aops.c
+++ b/fs/gfs2/aops.c
@@ -91,22 +91,13 @@ static int gfs2_writepage(struct page *page, struct writeback_control *wbc)
struct inode *inode = page->mapping->host;
struct gfs2_inode *ip = GFS2_I(inode);
struct gfs2_sbd *sdp = GFS2_SB(inode);
- loff_t i_size = i_size_read(inode);
- pgoff_t end_index = i_size >> PAGE_SHIFT;
- unsigned offset;
+ struct iomap_writepage_ctx wpc = { };
if (gfs2_assert_withdraw(sdp, gfs2_glock_is_held_excl(ip->i_gl)))
goto out;
if (current->journal_info)
goto redirty;
- /* Is the page fully outside i_size? (truncate in progress) */
- offset = i_size & (PAGE_SIZE-1);
- if (page->index > end_index || (page->index == end_index && !offset)) {
- page->mapping->a_ops->invalidatepage(page, 0, PAGE_SIZE);
- goto out;
- }
-
- return nobh_writepage(page, gfs2_get_block_noalloc, wbc);
+ return iomap_writepage(page, wbc, &wpc, &gfs2_writeback_ops);
redirty:
redirty_page_for_writepage(wbc, page);
@@ -115,11 +106,16 @@ static int gfs2_writepage(struct page *page, struct writeback_control *wbc)
return 0;
}
-/* This is the same as calling block_write_full_page, but it also
+/**
+ * gfs2_write_jdata_page - gfs2 jdata-specific version of block_write_full_page
+ * @page: The page to write
+ * @wbc: The writeback control
+ *
+ * This is the same as calling block_write_full_page, but it also
* writes pages outside of i_size
*/
-static int gfs2_write_full_page(struct page *page, get_block_t *get_block,
- struct writeback_control *wbc)
+static int gfs2_write_jdata_page(struct page *page,
+ struct writeback_control *wbc)
{
struct inode * const inode = page->mapping->host;
loff_t i_size = i_size_read(inode);
@@ -137,7 +133,7 @@ static int gfs2_write_full_page(struct page *page, get_block_t *get_block,
if (page->index == end_index && offset)
zero_user_segment(page, offset, PAGE_SIZE);
- return __block_write_full_page(inode, page, get_block, wbc,
+ return __block_write_full_page(inode, page, gfs2_get_block_noalloc, wbc,
end_buffer_async_write);
}
@@ -166,7 +162,7 @@ static int __gfs2_jdata_writepage(struct page *page, struct writeback_control *w
}
gfs2_page_add_databufs(ip, page, 0, sdp->sd_vfs->s_blocksize);
}
- return gfs2_write_full_page(page, gfs2_get_block_noalloc, wbc);
+ return gfs2_write_jdata_page(page, wbc);
}
/**
@@ -208,7 +204,8 @@ static int gfs2_writepages(struct address_space *mapping,
struct writeback_control *wbc)
{
struct gfs2_sbd *sdp = gfs2_mapping2sbd(mapping);
- int ret = mpage_writepages(mapping, wbc, gfs2_get_block_noalloc);
+ struct iomap_writepage_ctx wpc = { };
+ int ret;
/*
* Even if we didn't write any pages here, we might still be holding
@@ -216,9 +213,9 @@ static int gfs2_writepages(struct address_space *mapping,
* want balance_dirty_pages() to loop indefinitely trying to write out
* pages held in the ail that it can't find.
*/
+ ret = iomap_writepages(mapping, wbc, &wpc, &gfs2_writeback_ops);
if (ret == 0)
set_bit(SDF_FORCE_AIL_FLUSH, &sdp->sd_flags);
-
return ret;
}
@@ -470,12 +467,13 @@ static int stuffed_readpage(struct gfs2_inode *ip, struct page *page)
static int __gfs2_readpage(void *file, struct page *page)
{
- struct gfs2_inode *ip = GFS2_I(page->mapping->host);
- struct gfs2_sbd *sdp = GFS2_SB(page->mapping->host);
+ struct inode *inode = page->mapping->host;
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_sbd *sdp = GFS2_SB(inode);
int error;
- if (i_blocksize(page->mapping->host) == PAGE_SIZE &&
- !page_has_buffers(page)) {
+ if (!gfs2_is_jdata(ip) ||
+ (i_blocksize(inode) == PAGE_SIZE && !page_has_buffers(page))) {
error = iomap_readpage(page, &gfs2_iomap_ops);
} else if (gfs2_is_stuffed(ip)) {
error = stuffed_readpage(ip, page);
@@ -563,8 +561,12 @@ static void gfs2_readahead(struct readahead_control *rac)
struct inode *inode = rac->mapping->host;
struct gfs2_inode *ip = GFS2_I(inode);
- if (!gfs2_is_stuffed(ip))
+ if (gfs2_is_stuffed(ip))
+ ;
+ else if (gfs2_is_jdata(ip))
mpage_readahead(rac, gfs2_block_map);
+ else
+ iomap_readahead(rac, &gfs2_iomap_ops);
}
/**
@@ -621,7 +623,8 @@ void adjust_fs_space(struct inode *inode)
static int jdata_set_page_dirty(struct page *page)
{
- SetPageChecked(page);
+ if (current->journal_info)
+ SetPageChecked(page);
return __set_page_dirty_buffers(page);
}
@@ -663,8 +666,11 @@ static void gfs2_discard(struct gfs2_sbd *sdp, struct buffer_head *bh)
if (bd) {
if (!list_empty(&bd->bd_list) && !buffer_pinned(bh))
list_del_init(&bd->bd_list);
- else
+ else {
+ spin_lock(&sdp->sd_ail_lock);
gfs2_remove_from_journal(bh, REMOVE_JDATA);
+ spin_unlock(&sdp->sd_ail_lock);
+ }
}
bh->b_bdev = NULL;
clear_buffer_mapped(bh);
@@ -736,7 +742,6 @@ int gfs2_releasepage(struct page *page, gfp_t gfp_mask)
*/
gfs2_log_lock(sdp);
- spin_lock(&sdp->sd_ail_lock);
head = bh = page_buffers(page);
do {
if (atomic_read(&bh->b_count))
@@ -748,7 +753,6 @@ int gfs2_releasepage(struct page *page, gfp_t gfp_mask)
goto cannot_release;
bh = bh->b_this_page;
} while(bh != head);
- spin_unlock(&sdp->sd_ail_lock);
head = bh = page_buffers(page);
do {
@@ -774,7 +778,6 @@ int gfs2_releasepage(struct page *page, gfp_t gfp_mask)
return try_to_free_buffers(page);
cannot_release:
- spin_unlock(&sdp->sd_ail_lock);
gfs2_log_unlock(sdp);
return 0;
}
@@ -784,12 +787,13 @@ static const struct address_space_operations gfs2_aops = {
.writepages = gfs2_writepages,
.readpage = gfs2_readpage,
.readahead = gfs2_readahead,
+ .set_page_dirty = iomap_set_page_dirty,
+ .releasepage = iomap_releasepage,
+ .invalidatepage = iomap_invalidatepage,
.bmap = gfs2_bmap,
- .invalidatepage = gfs2_invalidatepage,
- .releasepage = gfs2_releasepage,
.direct_IO = noop_direct_IO,
- .migratepage = buffer_migrate_page,
- .is_partially_uptodate = block_is_partially_uptodate,
+ .migratepage = iomap_migrate_page,
+ .is_partially_uptodate = iomap_is_partially_uptodate,
.error_remove_page = generic_error_remove_page,
};
diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index 0f69fbd..8dff9cbd 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -56,7 +56,6 @@ static int gfs2_unstuffer_page(struct gfs2_inode *ip, struct buffer_head *dibh,
u64 block, struct page *page)
{
struct inode *inode = &ip->i_inode;
- struct buffer_head *bh;
int release = 0;
if (!page || page->index) {
@@ -80,20 +79,21 @@ static int gfs2_unstuffer_page(struct gfs2_inode *ip, struct buffer_head *dibh,
SetPageUptodate(page);
}
- if (!page_has_buffers(page))
- create_empty_buffers(page, BIT(inode->i_blkbits),
- BIT(BH_Uptodate));
+ if (gfs2_is_jdata(ip)) {
+ struct buffer_head *bh;
- bh = page_buffers(page);
+ if (!page_has_buffers(page))
+ create_empty_buffers(page, BIT(inode->i_blkbits),
+ BIT(BH_Uptodate));
- if (!buffer_mapped(bh))
- map_bh(bh, inode->i_sb, block);
+ bh = page_buffers(page);
+ if (!buffer_mapped(bh))
+ map_bh(bh, inode->i_sb, block);
- set_buffer_uptodate(bh);
- if (gfs2_is_jdata(ip))
+ set_buffer_uptodate(bh);
gfs2_trans_add_data(ip->i_gl, bh);
- else {
- mark_buffer_dirty(bh);
+ } else {
+ set_page_dirty(page);
gfs2_ordered_add_inode(ip);
}
@@ -1158,7 +1158,8 @@ static int gfs2_iomap_begin(struct inode *inode, loff_t pos, loff_t length,
struct metapath mp = { .mp_aheight = 1, };
int ret;
- iomap->flags |= IOMAP_F_BUFFER_HEAD;
+ if (gfs2_is_jdata(ip))
+ iomap->flags |= IOMAP_F_BUFFER_HEAD;
trace_gfs2_iomap_start(ip, pos, length, flags);
if (gfs2_iomap_need_write_lock(flags)) {
@@ -1291,6 +1292,7 @@ int gfs2_block_map(struct inode *inode, sector_t lblock,
loff_t length = bh_map->b_size;
struct metapath mp = { .mp_aheight = 1, };
struct iomap iomap = { };
+ int flags = create ? IOMAP_WRITE : 0;
int ret;
clear_buffer_mapped(bh_map);
@@ -1298,15 +1300,14 @@ int gfs2_block_map(struct inode *inode, sector_t lblock,
clear_buffer_boundary(bh_map);
trace_gfs2_bmap(ip, bh_map, lblock, create, 1);
- if (create) {
- ret = gfs2_iomap_get(inode, pos, length, IOMAP_WRITE, &iomap, &mp);
- if (!ret && iomap.type == IOMAP_HOLE)
+ ret = gfs2_iomap_get(inode, pos, length, flags, &iomap, &mp);
+ if (!ret && iomap.type == IOMAP_HOLE) {
+ if (create)
ret = gfs2_iomap_alloc(inode, &iomap, &mp);
- release_metapath(&mp);
- } else {
- ret = gfs2_iomap_get(inode, pos, length, 0, &iomap, &mp);
- release_metapath(&mp);
+ else
+ ret = -ENODATA;
}
+ release_metapath(&mp);
if (ret)
goto out;
@@ -2518,3 +2519,26 @@ int __gfs2_punch_hole(struct file *file, loff_t offset, loff_t length)
gfs2_trans_end(sdp);
return error;
}
+
+static int gfs2_map_blocks(struct iomap_writepage_ctx *wpc, struct inode *inode,
+ loff_t offset)
+{
+ struct metapath mp = { .mp_aheight = 1, };
+ int ret;
+
+ if (WARN_ON_ONCE(gfs2_is_stuffed(GFS2_I(inode))))
+ return -EIO;
+
+ if (offset >= wpc->iomap.offset &&
+ offset < wpc->iomap.offset + wpc->iomap.length)
+ return 0;
+
+ memset(&wpc->iomap, 0, sizeof(wpc->iomap));
+ ret = gfs2_iomap_get(inode, offset, INT_MAX, 0, &wpc->iomap, &mp);
+ release_metapath(&mp);
+ return ret;
+}
+
+const struct iomap_writeback_ops gfs2_writeback_ops = {
+ .map_blocks = gfs2_map_blocks,
+};
diff --git a/fs/gfs2/bmap.h b/fs/gfs2/bmap.h
index b88fd45..aed4632 100644
--- a/fs/gfs2/bmap.h
+++ b/fs/gfs2/bmap.h
@@ -44,6 +44,7 @@ static inline void gfs2_write_calc_reserv(const struct gfs2_inode *ip,
}
extern const struct iomap_ops gfs2_iomap_ops;
+extern const struct iomap_writeback_ops gfs2_writeback_ops;
extern int gfs2_unstuff_dinode(struct gfs2_inode *ip, struct page *page);
extern int gfs2_block_map(struct inode *inode, sector_t lblock,
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index f13b136..5441c17 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -270,7 +270,12 @@ static void __gfs2_glock_put(struct gfs2_glock *gl)
gfs2_glock_remove_from_lru(gl);
spin_unlock(&gl->gl_lockref.lock);
GLOCK_BUG_ON(gl, !list_empty(&gl->gl_holders));
- GLOCK_BUG_ON(gl, mapping && mapping->nrpages && !gfs2_withdrawn(sdp));
+ if (mapping) {
+ truncate_inode_pages_final(mapping);
+ if (!gfs2_withdrawn(sdp))
+ GLOCK_BUG_ON(gl, mapping->nrpages ||
+ mapping->nrexceptional);
+ }
trace_gfs2_glock_put(gl);
sdp->sd_lockstruct.ls_ops->lm_put_lock(gl);
}
@@ -453,9 +458,6 @@ static void state_change(struct gfs2_glock *gl, unsigned int new_state)
else
gl->gl_lockref.count--;
}
- if (held1 && held2 && list_empty(&gl->gl_holders))
- clear_bit(GLF_QUEUED, &gl->gl_flags);
-
if (new_state != gl->gl_target)
/* shorten our minimum hold time */
gl->gl_hold_time = max(gl->gl_hold_time - GL_GLOCK_HOLD_DECR,
@@ -1049,7 +1051,8 @@ int gfs2_glock_get(struct gfs2_sbd *sdp, u64 number,
gl->gl_object = NULL;
gl->gl_hold_time = GL_GLOCK_DFT_HOLD;
INIT_DELAYED_WORK(&gl->gl_work, glock_work_func);
- INIT_DELAYED_WORK(&gl->gl_delete, delete_work_func);
+ if (gl->gl_name.ln_type == LM_TYPE_IOPEN)
+ INIT_DELAYED_WORK(&gl->gl_delete, delete_work_func);
mapping = gfs2_glock2aspace(gl);
if (mapping) {
@@ -1345,7 +1348,6 @@ __acquires(&gl->gl_lockref.lock)
if (unlikely((gh->gh_flags & LM_FLAG_PRIORITY) && !insert_pt))
insert_pt = &gh2->gh_list;
}
- set_bit(GLF_QUEUED, &gl->gl_flags);
trace_gfs2_glock_queue(gh, 1);
gfs2_glstats_inc(gl, GFS2_LKS_QCOUNT);
gfs2_sbstats_inc(gl, GFS2_LKS_QCOUNT);
@@ -1646,16 +1648,15 @@ void gfs2_glock_cb(struct gfs2_glock *gl, unsigned int state)
unsigned long now = jiffies;
gfs2_glock_hold(gl);
+ spin_lock(&gl->gl_lockref.lock);
holdtime = gl->gl_tchange + gl->gl_hold_time;
- if (test_bit(GLF_QUEUED, &gl->gl_flags) &&
+ if (!list_empty(&gl->gl_holders) &&
gl->gl_name.ln_type == LM_TYPE_INODE) {
if (time_before(now, holdtime))
delay = holdtime - now;
if (test_bit(GLF_REPLY_PENDING, &gl->gl_flags))
delay = gl->gl_hold_time;
}
-
- spin_lock(&gl->gl_lockref.lock);
handle_callback(gl, state, delay, true);
__gfs2_glock_queue_work(gl, delay);
spin_unlock(&gl->gl_lockref.lock);
@@ -1842,10 +1843,9 @@ static struct shrinker glock_shrinker = {
};
/**
- * examine_bucket - Call a function for glock in a hash bucket
+ * glock_hash_walk - Call a function for glock in a hash bucket
* @examiner: the function
* @sdp: the filesystem
- * @bucket: the bucket
*
* Note that the function can be called multiple times on the same
* object. So the user must ensure that the function can cope with
@@ -1901,9 +1901,11 @@ bool gfs2_delete_work_queued(const struct gfs2_glock *gl)
static void flush_delete_work(struct gfs2_glock *gl)
{
- if (cancel_delayed_work(&gl->gl_delete)) {
- queue_delayed_work(gfs2_delete_workqueue,
- &gl->gl_delete, 0);
+ if (gl->gl_name.ln_type == LM_TYPE_IOPEN) {
+ if (cancel_delayed_work(&gl->gl_delete)) {
+ queue_delayed_work(gfs2_delete_workqueue,
+ &gl->gl_delete, 0);
+ }
}
gfs2_glock_queue_work(gl, 0);
}
@@ -2100,7 +2102,7 @@ static const char *gflags2str(char *buf, const struct gfs2_glock *gl)
*p++ = 'I';
if (test_bit(GLF_FROZEN, gflags))
*p++ = 'F';
- if (test_bit(GLF_QUEUED, gflags))
+ if (!list_empty(&gl->gl_holders))
*p++ = 'q';
if (test_bit(GLF_LRU, gflags))
*p++ = 'L';
@@ -2415,7 +2417,7 @@ static const struct seq_operations gfs2_glstats_seq_ops = {
.show = gfs2_glstats_seq_show,
};
-static const struct seq_operations gfs2_sbstats_seq_ops = {
+static const struct seq_operations gfs2_sbstats_sops = {
.start = gfs2_sbstats_seq_start,
.next = gfs2_sbstats_seq_next,
.stop = gfs2_sbstats_seq_stop,
@@ -2468,16 +2470,6 @@ static int gfs2_glstats_open(struct inode *inode, struct file *file)
return __gfs2_glocks_open(inode, file, &gfs2_glstats_seq_ops);
}
-static int gfs2_sbstats_open(struct inode *inode, struct file *file)
-{
- int ret = seq_open(file, &gfs2_sbstats_seq_ops);
- if (ret == 0) {
- struct seq_file *seq = file->private_data;
- seq->private = inode->i_private; /* sdp */
- }
- return ret;
-}
-
static const struct file_operations gfs2_glocks_fops = {
.owner = THIS_MODULE,
.open = gfs2_glocks_open,
@@ -2494,13 +2486,7 @@ static const struct file_operations gfs2_glstats_fops = {
.release = gfs2_glocks_release,
};
-static const struct file_operations gfs2_sbstats_fops = {
- .owner = THIS_MODULE,
- .open = gfs2_sbstats_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
+DEFINE_SEQ_ATTRIBUTE(gfs2_sbstats);
void gfs2_create_debugfs_file(struct gfs2_sbd *sdp)
{
diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index de1d5f1..aa3f523 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -178,6 +178,9 @@ static int rgrp_go_sync(struct gfs2_glock *gl)
struct gfs2_sbd *sdp = gl->gl_name.ln_sbd;
struct address_space *mapping = &sdp->sd_aspace;
struct gfs2_rgrpd *rgd = gfs2_glock2rgrp(gl);
+ const unsigned bsize = sdp->sd_sb.sb_bsize;
+ loff_t start = (rgd->rd_addr * bsize) & PAGE_MASK;
+ loff_t end = PAGE_ALIGN((rgd->rd_addr + rgd->rd_length) * bsize) - 1;
int error;
if (!test_and_clear_bit(GLF_DIRTY, &gl->gl_flags))
@@ -186,18 +189,13 @@ static int rgrp_go_sync(struct gfs2_glock *gl)
gfs2_log_flush(sdp, gl, GFS2_LOG_HEAD_FLUSH_NORMAL |
GFS2_LFC_RGRP_GO_SYNC);
- filemap_fdatawrite_range(mapping, gl->gl_vm.start, gl->gl_vm.end);
- error = filemap_fdatawait_range(mapping, gl->gl_vm.start, gl->gl_vm.end);
- WARN_ON_ONCE(error);
+ filemap_fdatawrite_range(mapping, start, end);
+ error = filemap_fdatawait_range(mapping, start, end);
+ WARN_ON_ONCE(error && !gfs2_withdrawn(sdp));
mapping_set_error(mapping, error);
if (!error)
error = gfs2_ail_empty_gl(gl);
-
- spin_lock(&gl->gl_lockref.lock);
- rgd = gl->gl_object;
- if (rgd)
- gfs2_free_clones(rgd);
- spin_unlock(&gl->gl_lockref.lock);
+ gfs2_free_clones(rgd);
return error;
}
@@ -216,15 +214,23 @@ static void rgrp_go_inval(struct gfs2_glock *gl, int flags)
struct gfs2_sbd *sdp = gl->gl_name.ln_sbd;
struct address_space *mapping = &sdp->sd_aspace;
struct gfs2_rgrpd *rgd = gfs2_glock2rgrp(gl);
+ const unsigned bsize = sdp->sd_sb.sb_bsize;
+ loff_t start = (rgd->rd_addr * bsize) & PAGE_MASK;
+ loff_t end = PAGE_ALIGN((rgd->rd_addr + rgd->rd_length) * bsize) - 1;
- if (rgd)
- gfs2_rgrp_brelse(rgd);
-
+ gfs2_rgrp_brelse(rgd);
WARN_ON_ONCE(!(flags & DIO_METADATA));
- truncate_inode_pages_range(mapping, gl->gl_vm.start, gl->gl_vm.end);
+ truncate_inode_pages_range(mapping, start, end);
+ rgd->rd_flags &= ~GFS2_RDF_UPTODATE;
+}
+
+static void gfs2_rgrp_go_dump(struct seq_file *seq, struct gfs2_glock *gl,
+ const char *fs_id_buf)
+{
+ struct gfs2_rgrpd *rgd = gfs2_glock2rgrp(gl);
if (rgd)
- rgd->rd_flags &= ~GFS2_RDF_UPTODATE;
+ gfs2_rgrp_dump(seq, rgd, fs_id_buf);
}
static struct gfs2_inode *gfs2_glock2inode(struct gfs2_glock *gl)
@@ -712,7 +718,7 @@ const struct gfs2_glock_operations gfs2_rgrp_glops = {
.go_sync = rgrp_go_sync,
.go_inval = rgrp_go_inval,
.go_lock = gfs2_rgrp_go_lock,
- .go_dump = gfs2_rgrp_dump,
+ .go_dump = gfs2_rgrp_go_dump,
.go_type = LM_TYPE_RGRP,
.go_flags = GLOF_LVB,
};
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index ca2ec024..d770730 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -41,6 +41,10 @@ struct gfs2_log_header_host {
u32 lh_flags; /* GFS2_LOG_HEAD_... */
u32 lh_tail; /* Block number of log tail */
u32 lh_blkno;
+
+ s64 lh_local_total;
+ s64 lh_local_free;
+ s64 lh_local_dinodes;
};
/*
@@ -340,7 +344,6 @@ enum {
GLF_REPLY_PENDING = 9,
GLF_INITIAL = 10,
GLF_FROZEN = 11,
- GLF_QUEUED = 12,
GLF_LRU = 13,
GLF_OBJECT = 14, /* Used only for tracing */
GLF_BLOCKING = 15,
@@ -378,17 +381,10 @@ struct gfs2_glock {
atomic_t gl_ail_count;
atomic_t gl_revokes;
struct delayed_work gl_work;
- union {
- /* For iopen glocks only */
- struct {
- struct delayed_work gl_delete;
- u64 gl_no_formal_ino;
- };
- /* For rgrp glocks only */
- struct {
- loff_t start;
- loff_t end;
- } gl_vm;
+ /* For iopen glocks only */
+ struct {
+ struct delayed_work gl_delete;
+ u64 gl_no_formal_ino;
};
struct rcu_head gl_rcu;
struct rhash_head gl_node;
@@ -701,10 +697,18 @@ struct gfs2_pcpu_lkstats {
struct gfs2_lkstats lkstats[10];
};
+/* List of local (per node) statfs inodes */
+struct local_statfs_inode {
+ struct list_head si_list;
+ struct inode *si_sc_inode;
+ unsigned int si_jid; /* journal id this statfs inode corresponds to */
+};
+
struct gfs2_sbd {
struct super_block *sd_vfs;
struct gfs2_pcpu_lkstats __percpu *sd_lkstats;
struct kobject sd_kobj;
+ struct completion sd_kobj_unregister;
unsigned long sd_flags; /* SDF_... */
struct gfs2_sb_host sd_sb;
@@ -751,6 +755,7 @@ struct gfs2_sbd {
struct inode *sd_jindex;
struct inode *sd_statfs_inode;
struct inode *sd_sc_inode;
+ struct list_head sd_sc_inodes_list;
struct inode *sd_qc_inode;
struct inode *sd_rindex;
struct inode *sd_quota_inode;
diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c
index 3763c9f..9133b31 100644
--- a/fs/gfs2/log.c
+++ b/fs/gfs2/log.c
@@ -70,7 +70,7 @@ unsigned int gfs2_struct2blk(struct gfs2_sbd *sdp, unsigned int nstruct)
*
*/
-static void gfs2_remove_from_ail(struct gfs2_bufdata *bd)
+void gfs2_remove_from_ail(struct gfs2_bufdata *bd)
{
bd->bd_tr = NULL;
list_del_init(&bd->bd_ail_st_list);
@@ -244,13 +244,15 @@ static void gfs2_ail1_start(struct gfs2_sbd *sdp)
* @tr: the transaction
* @max_revokes: If nonzero, issue revokes for the bd items for written buffers
*
+ * returns: the transaction's count of remaining active items
*/
-static void gfs2_ail1_empty_one(struct gfs2_sbd *sdp, struct gfs2_trans *tr,
+static int gfs2_ail1_empty_one(struct gfs2_sbd *sdp, struct gfs2_trans *tr,
int *max_revokes)
{
struct gfs2_bufdata *bd, *s;
struct buffer_head *bh;
+ int active_count = 0;
list_for_each_entry_safe_reverse(bd, s, &tr->tr_ail1_list,
bd_ail_st_list) {
@@ -265,8 +267,10 @@ static void gfs2_ail1_empty_one(struct gfs2_sbd *sdp, struct gfs2_trans *tr,
* If the ail buffer is not busy and caught an error, flag it
* for others.
*/
- if (!sdp->sd_log_error && buffer_busy(bh))
+ if (!sdp->sd_log_error && buffer_busy(bh)) {
+ active_count++;
continue;
+ }
if (!buffer_uptodate(bh) &&
!cmpxchg(&sdp->sd_log_error, 0, -EIO)) {
gfs2_io_error_bh(sdp, bh);
@@ -285,6 +289,7 @@ static void gfs2_ail1_empty_one(struct gfs2_sbd *sdp, struct gfs2_trans *tr,
}
list_move(&bd->bd_ail_st_list, &tr->tr_ail2_list);
}
+ return active_count;
}
/**
@@ -303,8 +308,7 @@ static int gfs2_ail1_empty(struct gfs2_sbd *sdp, int max_revokes)
spin_lock(&sdp->sd_ail_lock);
list_for_each_entry_safe_reverse(tr, s, &sdp->sd_ail1_list, tr_list) {
- gfs2_ail1_empty_one(sdp, tr, &max_revokes);
- if (list_empty(&tr->tr_ail1_list) && oldest_tr)
+ if (!gfs2_ail1_empty_one(sdp, tr, &max_revokes) && oldest_tr)
list_move(&tr->tr_list, &sdp->sd_ail2_list);
else
oldest_tr = 0;
@@ -716,16 +720,24 @@ void gfs2_write_revokes(struct gfs2_sbd *sdp)
atomic_dec(&sdp->sd_log_blks_free);
/* If no blocks have been reserved, we need to also
* reserve a block for the header */
- if (!sdp->sd_log_blks_reserved)
+ if (!sdp->sd_log_blks_reserved) {
atomic_dec(&sdp->sd_log_blks_free);
+ trace_gfs2_log_blocks(sdp, -2);
+ } else {
+ trace_gfs2_log_blocks(sdp, -1);
+ }
}
gfs2_ail1_empty(sdp, max_revokes);
gfs2_log_unlock(sdp);
if (!sdp->sd_log_num_revoke) {
atomic_inc(&sdp->sd_log_blks_free);
- if (!sdp->sd_log_blks_reserved)
+ if (!sdp->sd_log_blks_reserved) {
atomic_inc(&sdp->sd_log_blks_free);
+ trace_gfs2_log_blocks(sdp, 2);
+ } else {
+ trace_gfs2_log_blocks(sdp, 1);
+ }
}
}
@@ -902,7 +914,7 @@ static void empty_ail1_list(struct gfs2_sbd *sdp)
}
/**
- * drain_bd - drain the buf and databuf queue for a failed transaction
+ * trans_drain - drain the buf and databuf queue for a failed transaction
* @tr: the transaction to drain
*
* When this is called, we're taking an error exit for a log write that failed
@@ -954,10 +966,8 @@ void gfs2_log_flush(struct gfs2_sbd *sdp, struct gfs2_glock *gl, u32 flags)
goto out;
/* Log might have been flushed while we waited for the flush lock */
- if (gl && !test_bit(GLF_LFLUSH, &gl->gl_flags)) {
- up_write(&sdp->sd_log_flush_lock);
- return;
- }
+ if (gl && !test_bit(GLF_LFLUSH, &gl->gl_flags))
+ goto out;
trace_gfs2_log_flush(sdp, 1, flags);
if (flags & GFS2_LOG_HEAD_FLUSH_SHUTDOWN)
@@ -971,25 +981,25 @@ void gfs2_log_flush(struct gfs2_sbd *sdp, struct gfs2_glock *gl, u32 flags)
if (unlikely (state == SFS_FROZEN))
if (gfs2_assert_withdraw_delayed(sdp,
!tr->tr_num_buf_new && !tr->tr_num_databuf_new))
- goto out;
+ goto out_withdraw;
}
if (unlikely(state == SFS_FROZEN))
if (gfs2_assert_withdraw_delayed(sdp, !sdp->sd_log_num_revoke))
- goto out;
+ goto out_withdraw;
if (gfs2_assert_withdraw_delayed(sdp,
sdp->sd_log_num_revoke == sdp->sd_log_committed_revoke))
- goto out;
+ goto out_withdraw;
gfs2_ordered_write(sdp);
if (gfs2_withdrawn(sdp))
- goto out;
+ goto out_withdraw;
lops_before_commit(sdp, tr);
if (gfs2_withdrawn(sdp))
- goto out;
+ goto out_withdraw;
gfs2_log_submit_bio(&sdp->sd_log_bio, REQ_OP_WRITE);
if (gfs2_withdrawn(sdp))
- goto out;
+ goto out_withdraw;
if (sdp->sd_log_head != sdp->sd_log_flush_head) {
log_flush_wait(sdp);
@@ -1000,7 +1010,7 @@ void gfs2_log_flush(struct gfs2_sbd *sdp, struct gfs2_glock *gl, u32 flags)
log_write_header(sdp, flags);
}
if (gfs2_withdrawn(sdp))
- goto out;
+ goto out_withdraw;
lops_after_commit(sdp, tr);
gfs2_log_lock(sdp);
@@ -1020,7 +1030,7 @@ void gfs2_log_flush(struct gfs2_sbd *sdp, struct gfs2_glock *gl, u32 flags)
if (!sdp->sd_log_idle) {
empty_ail1_list(sdp);
if (gfs2_withdrawn(sdp))
- goto out;
+ goto out_withdraw;
atomic_dec(&sdp->sd_log_blks_free); /* Adjust for unreserved buffer */
trace_gfs2_log_blocks(sdp, -1);
log_write_header(sdp, flags);
@@ -1033,27 +1043,30 @@ void gfs2_log_flush(struct gfs2_sbd *sdp, struct gfs2_glock *gl, u32 flags)
atomic_set(&sdp->sd_freeze_state, SFS_FROZEN);
}
-out:
- if (gfs2_withdrawn(sdp)) {
- trans_drain(tr);
- /**
- * If the tr_list is empty, we're withdrawing during a log
- * flush that targets a transaction, but the transaction was
- * never queued onto any of the ail lists. Here we add it to
- * ail1 just so that ail_drain() will find and free it.
- */
- spin_lock(&sdp->sd_ail_lock);
- if (tr && list_empty(&tr->tr_list))
- list_add(&tr->tr_list, &sdp->sd_ail1_list);
- spin_unlock(&sdp->sd_ail_lock);
- ail_drain(sdp); /* frees all transactions */
- tr = NULL;
- }
-
+out_end:
trace_gfs2_log_flush(sdp, 0, flags);
+out:
up_write(&sdp->sd_log_flush_lock);
-
gfs2_trans_free(sdp, tr);
+ if (gfs2_withdrawing(sdp))
+ gfs2_withdraw(sdp);
+ return;
+
+out_withdraw:
+ trans_drain(tr);
+ /**
+ * If the tr_list is empty, we're withdrawing during a log
+ * flush that targets a transaction, but the transaction was
+ * never queued onto any of the ail lists. Here we add it to
+ * ail1 just so that ail_drain() will find and free it.
+ */
+ spin_lock(&sdp->sd_ail_lock);
+ if (tr && list_empty(&tr->tr_list))
+ list_add(&tr->tr_list, &sdp->sd_ail1_list);
+ spin_unlock(&sdp->sd_ail_lock);
+ ail_drain(sdp); /* frees all transactions */
+ tr = NULL;
+ goto out_end;
}
/**
diff --git a/fs/gfs2/log.h b/fs/gfs2/log.h
index 8965c75..79f9729 100644
--- a/fs/gfs2/log.h
+++ b/fs/gfs2/log.h
@@ -63,7 +63,7 @@ static inline void gfs2_ordered_add_inode(struct gfs2_inode *ip)
extern void gfs2_ordered_del_inode(struct gfs2_inode *ip);
extern unsigned int gfs2_struct2blk(struct gfs2_sbd *sdp, unsigned int nstruct);
-
+extern void gfs2_remove_from_ail(struct gfs2_bufdata *bd);
extern void gfs2_log_release(struct gfs2_sbd *sdp, unsigned int blks);
extern int gfs2_log_reserve(struct gfs2_sbd *sdp, unsigned int blks);
extern void gfs2_write_log_header(struct gfs2_sbd *sdp, struct gfs2_jdesc *jd,
diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c
index ed1da43..ed69298 100644
--- a/fs/gfs2/lops.c
+++ b/fs/gfs2/lops.c
@@ -823,7 +823,7 @@ static int buf_lo_scan_elements(struct gfs2_jdesc *jd, u32 start,
*
*/
-static void gfs2_meta_sync(struct gfs2_glock *gl)
+void gfs2_meta_sync(struct gfs2_glock *gl)
{
struct address_space *mapping = gfs2_glock2aspace(gl);
struct gfs2_sbd *sdp = gl->gl_name.ln_sbd;
diff --git a/fs/gfs2/lops.h b/fs/gfs2/lops.h
index 9c5e4e4..4a3d8ae 100644
--- a/fs/gfs2/lops.h
+++ b/fs/gfs2/lops.h
@@ -27,6 +27,7 @@ extern void gfs2_log_submit_bio(struct bio **biop, int opf);
extern void gfs2_pin(struct gfs2_sbd *sdp, struct buffer_head *bh);
extern int gfs2_find_jhead(struct gfs2_jdesc *jd,
struct gfs2_log_header_host *head, bool keep_cache);
+extern void gfs2_meta_sync(struct gfs2_glock *gl);
static inline unsigned int buf_limit(struct gfs2_sbd *sdp)
{
diff --git a/fs/gfs2/meta_io.c b/fs/gfs2/meta_io.c
index 9856cc2..2db573e 100644
--- a/fs/gfs2/meta_io.c
+++ b/fs/gfs2/meta_io.c
@@ -348,38 +348,109 @@ void gfs2_remove_from_journal(struct buffer_head *bh, int meta)
brelse(bh);
}
if (bd) {
- spin_lock(&sdp->sd_ail_lock);
if (bd->bd_tr) {
gfs2_trans_add_revoke(sdp, bd);
} else if (was_pinned) {
bh->b_private = NULL;
kmem_cache_free(gfs2_bufdata_cachep, bd);
+ } else if (!list_empty(&bd->bd_ail_st_list) &&
+ !list_empty(&bd->bd_ail_gl_list)) {
+ gfs2_remove_from_ail(bd);
}
- spin_unlock(&sdp->sd_ail_lock);
}
clear_buffer_dirty(bh);
clear_buffer_uptodate(bh);
}
/**
- * gfs2_meta_wipe - make inode's buffers so they aren't dirty/pinned anymore
+ * gfs2_ail1_wipe - remove deleted/freed buffers from the ail1 list
+ * @sdp: superblock
+ * @bstart: starting block address of buffers to remove
+ * @blen: length of buffers to be removed
+ *
+ * This function is called from gfs2_journal wipe, whose job is to remove
+ * buffers, corresponding to deleted blocks, from the journal. If we find any
+ * bufdata elements on the system ail1 list, they haven't been written to
+ * the journal yet. So we remove them.
+ */
+static void gfs2_ail1_wipe(struct gfs2_sbd *sdp, u64 bstart, u32 blen)
+{
+ struct gfs2_trans *tr, *s;
+ struct gfs2_bufdata *bd, *bs;
+ struct buffer_head *bh;
+ u64 end = bstart + blen;
+
+ gfs2_log_lock(sdp);
+ spin_lock(&sdp->sd_ail_lock);
+ list_for_each_entry_safe(tr, s, &sdp->sd_ail1_list, tr_list) {
+ list_for_each_entry_safe(bd, bs, &tr->tr_ail1_list,
+ bd_ail_st_list) {
+ bh = bd->bd_bh;
+ if (bh->b_blocknr < bstart || bh->b_blocknr >= end)
+ continue;
+
+ gfs2_remove_from_journal(bh, REMOVE_JDATA);
+ }
+ }
+ spin_unlock(&sdp->sd_ail_lock);
+ gfs2_log_unlock(sdp);
+}
+
+static struct buffer_head *gfs2_getjdatabuf(struct gfs2_inode *ip, u64 blkno)
+{
+ struct address_space *mapping = ip->i_inode.i_mapping;
+ struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+ struct page *page;
+ struct buffer_head *bh;
+ unsigned int shift = PAGE_SHIFT - sdp->sd_sb.sb_bsize_shift;
+ unsigned long index = blkno >> shift; /* convert block to page */
+ unsigned int bufnum = blkno - (index << shift);
+
+ page = find_get_page_flags(mapping, index, FGP_LOCK|FGP_ACCESSED);
+ if (!page)
+ return NULL;
+ if (!page_has_buffers(page)) {
+ unlock_page(page);
+ put_page(page);
+ return NULL;
+ }
+ /* Locate header for our buffer within our page */
+ for (bh = page_buffers(page); bufnum--; bh = bh->b_this_page)
+ /* Do nothing */;
+ get_bh(bh);
+ unlock_page(page);
+ put_page(page);
+ return bh;
+}
+
+/**
+ * gfs2_journal_wipe - make inode's buffers so they aren't dirty/pinned anymore
* @ip: the inode who owns the buffers
* @bstart: the first buffer in the run
* @blen: the number of buffers in the run
*
*/
-void gfs2_meta_wipe(struct gfs2_inode *ip, u64 bstart, u32 blen)
+void gfs2_journal_wipe(struct gfs2_inode *ip, u64 bstart, u32 blen)
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct buffer_head *bh;
+ int ty;
+ gfs2_ail1_wipe(sdp, bstart, blen);
while (blen) {
+ ty = REMOVE_META;
bh = gfs2_getbuf(ip->i_gl, bstart, NO_CREATE);
+ if (!bh && gfs2_is_jdata(ip)) {
+ bh = gfs2_getjdatabuf(ip, bstart);
+ ty = REMOVE_JDATA;
+ }
if (bh) {
lock_buffer(bh);
gfs2_log_lock(sdp);
- gfs2_remove_from_journal(bh, REMOVE_META);
+ spin_lock(&sdp->sd_ail_lock);
+ gfs2_remove_from_journal(bh, ty);
+ spin_unlock(&sdp->sd_ail_lock);
gfs2_log_unlock(sdp);
unlock_buffer(bh);
brelse(bh);
diff --git a/fs/gfs2/meta_io.h b/fs/gfs2/meta_io.h
index eafb74e..4a8c019 100644
--- a/fs/gfs2/meta_io.h
+++ b/fs/gfs2/meta_io.h
@@ -60,7 +60,7 @@ enum {
};
extern void gfs2_remove_from_journal(struct buffer_head *bh, int meta);
-extern void gfs2_meta_wipe(struct gfs2_inode *ip, u64 bstart, u32 blen);
+extern void gfs2_journal_wipe(struct gfs2_inode *ip, u64 bstart, u32 blen);
extern int gfs2_meta_indirect_buffer(struct gfs2_inode *ip, int height, u64 num,
struct buffer_head **bhp);
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 6d18d2c..7a7e3c1 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -110,6 +110,8 @@ static struct gfs2_sbd *init_sbd(struct super_block *sb)
spin_lock_init(&sdp->sd_trunc_lock);
spin_lock_init(&sdp->sd_bitmap_lock);
+ INIT_LIST_HEAD(&sdp->sd_sc_inodes_list);
+
mapping = &sdp->sd_aspace;
address_space_init_once(mapping);
@@ -169,15 +171,19 @@ static int gfs2_check_sb(struct gfs2_sbd *sdp, int silent)
return -EINVAL;
}
- /* If format numbers match exactly, we're done. */
+ if (sb->sb_fs_format != GFS2_FORMAT_FS ||
+ sb->sb_multihost_format != GFS2_FORMAT_MULTI) {
+ fs_warn(sdp, "Unknown on-disk format, unable to mount\n");
+ return -EINVAL;
+ }
- if (sb->sb_fs_format == GFS2_FORMAT_FS &&
- sb->sb_multihost_format == GFS2_FORMAT_MULTI)
- return 0;
+ if (sb->sb_bsize < 512 || sb->sb_bsize > PAGE_SIZE ||
+ (sb->sb_bsize & (sb->sb_bsize - 1))) {
+ pr_warn("Invalid superblock size\n");
+ return -EINVAL;
+ }
- fs_warn(sdp, "Unknown on-disk format, unable to mount\n");
-
- return -EINVAL;
+ return 0;
}
static void end_bio_io_page(struct bio *bio)
@@ -604,6 +610,90 @@ static int gfs2_jindex_hold(struct gfs2_sbd *sdp, struct gfs2_holder *ji_gh)
return error;
}
+/**
+ * init_statfs - look up and initialize master and local (per node) statfs inodes
+ * @sdp: The GFS2 superblock
+ *
+ * This should be called after the jindex is initialized in init_journal() and
+ * before gfs2_journal_recovery() is called because we need to be able to write
+ * to these inodes during recovery.
+ *
+ * Returns: errno
+ */
+static int init_statfs(struct gfs2_sbd *sdp)
+{
+ int error = 0;
+ struct inode *master = d_inode(sdp->sd_master_dir);
+ struct inode *pn = NULL;
+ char buf[30];
+ struct gfs2_jdesc *jd;
+ struct gfs2_inode *ip;
+
+ sdp->sd_statfs_inode = gfs2_lookup_simple(master, "statfs");
+ if (IS_ERR(sdp->sd_statfs_inode)) {
+ error = PTR_ERR(sdp->sd_statfs_inode);
+ fs_err(sdp, "can't read in statfs inode: %d\n", error);
+ goto fail;
+ }
+
+ pn = gfs2_lookup_simple(master, "per_node");
+ if (IS_ERR(pn)) {
+ error = PTR_ERR(pn);
+ fs_err(sdp, "can't find per_node directory: %d\n", error);
+ goto put_statfs;
+ }
+
+ /* For each jid, lookup the corresponding local statfs inode in the
+ * per_node metafs directory and save it in the sdp->sd_sc_inodes_list. */
+ list_for_each_entry(jd, &sdp->sd_jindex_list, jd_list) {
+ struct local_statfs_inode *lsi =
+ kmalloc(sizeof(struct local_statfs_inode), GFP_NOFS);
+ if (!lsi) {
+ error = -ENOMEM;
+ goto free_local;
+ }
+ sprintf(buf, "statfs_change%u", jd->jd_jid);
+ lsi->si_sc_inode = gfs2_lookup_simple(pn, buf);
+ if (IS_ERR(lsi->si_sc_inode)) {
+ error = PTR_ERR(lsi->si_sc_inode);
+ fs_err(sdp, "can't find local \"sc\" file#%u: %d\n",
+ jd->jd_jid, error);
+ goto free_local;
+ }
+ lsi->si_jid = jd->jd_jid;
+ if (jd->jd_jid == sdp->sd_jdesc->jd_jid)
+ sdp->sd_sc_inode = lsi->si_sc_inode;
+
+ list_add_tail(&lsi->si_list, &sdp->sd_sc_inodes_list);
+ }
+
+ iput(pn);
+ ip = GFS2_I(sdp->sd_sc_inode);
+ error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0,
+ &sdp->sd_sc_gh);
+ if (error) {
+ fs_err(sdp, "can't lock local \"sc\" file: %d\n", error);
+ goto free_local;
+ }
+ return 0;
+
+free_local:
+ free_local_statfs_inodes(sdp);
+ iput(pn);
+put_statfs:
+ iput(sdp->sd_statfs_inode);
+fail:
+ return error;
+}
+
+/* Uninitialize and free up memory used by the list of statfs inodes */
+static void uninit_statfs(struct gfs2_sbd *sdp)
+{
+ gfs2_glock_dq_uninit(&sdp->sd_sc_gh);
+ free_local_statfs_inodes(sdp);
+ iput(sdp->sd_statfs_inode);
+}
+
static int init_journal(struct gfs2_sbd *sdp, int undo)
{
struct inode *master = d_inode(sdp->sd_master_dir);
@@ -690,6 +780,11 @@ static int init_journal(struct gfs2_sbd *sdp, int undo)
}
trace_gfs2_log_blocks(sdp, atomic_read(&sdp->sd_log_blks_free));
+ /* Lookup statfs inodes here so journal recovery can use them. */
+ error = init_statfs(sdp);
+ if (error)
+ goto fail_jinode_gh;
+
if (sdp->sd_lockstruct.ls_first) {
unsigned int x;
for (x = 0; x < sdp->sd_journals; x++) {
@@ -698,14 +793,14 @@ static int init_journal(struct gfs2_sbd *sdp, int undo)
if (sdp->sd_args.ar_spectator) {
error = check_journal_clean(sdp, jd, true);
if (error)
- goto fail_jinode_gh;
+ goto fail_statfs;
continue;
}
error = gfs2_recover_journal(jd, true);
if (error) {
fs_err(sdp, "error recovering journal %u: %d\n",
x, error);
- goto fail_jinode_gh;
+ goto fail_statfs;
}
}
@@ -714,7 +809,7 @@ static int init_journal(struct gfs2_sbd *sdp, int undo)
error = gfs2_recover_journal(sdp->sd_jdesc, true);
if (error) {
fs_err(sdp, "error recovering my journal: %d\n", error);
- goto fail_jinode_gh;
+ goto fail_statfs;
}
}
@@ -725,6 +820,8 @@ static int init_journal(struct gfs2_sbd *sdp, int undo)
INIT_WORK(&sdp->sd_freeze_work, gfs2_freeze_func);
return 0;
+fail_statfs:
+ uninit_statfs(sdp);
fail_jinode_gh:
/* A withdraw may have done dq/uninit so now we need to check it */
if (!sdp->sd_args.ar_spectator &&
@@ -758,20 +855,12 @@ static int init_inodes(struct gfs2_sbd *sdp, int undo)
if (error)
goto fail;
- /* Read in the master statfs inode */
- sdp->sd_statfs_inode = gfs2_lookup_simple(master, "statfs");
- if (IS_ERR(sdp->sd_statfs_inode)) {
- error = PTR_ERR(sdp->sd_statfs_inode);
- fs_err(sdp, "can't read in statfs inode: %d\n", error);
- goto fail_journal;
- }
-
/* Read in the resource index inode */
sdp->sd_rindex = gfs2_lookup_simple(master, "rindex");
if (IS_ERR(sdp->sd_rindex)) {
error = PTR_ERR(sdp->sd_rindex);
fs_err(sdp, "can't get resource index inode: %d\n", error);
- goto fail_statfs;
+ goto fail_journal;
}
sdp->sd_rindex_uptodate = 0;
@@ -800,8 +889,6 @@ static int init_inodes(struct gfs2_sbd *sdp, int undo)
fail_rindex:
gfs2_clear_rgrpd(sdp);
iput(sdp->sd_rindex);
-fail_statfs:
- iput(sdp->sd_statfs_inode);
fail_journal:
init_journal(sdp, UNDO);
fail:
@@ -829,14 +916,6 @@ static int init_per_node(struct gfs2_sbd *sdp, int undo)
return error;
}
- sprintf(buf, "statfs_change%u", sdp->sd_jdesc->jd_jid);
- sdp->sd_sc_inode = gfs2_lookup_simple(pn, buf);
- if (IS_ERR(sdp->sd_sc_inode)) {
- error = PTR_ERR(sdp->sd_sc_inode);
- fs_err(sdp, "can't find local \"sc\" file: %d\n", error);
- goto fail;
- }
-
sprintf(buf, "quota_change%u", sdp->sd_jdesc->jd_jid);
sdp->sd_qc_inode = gfs2_lookup_simple(pn, buf);
if (IS_ERR(sdp->sd_qc_inode)) {
@@ -848,33 +927,21 @@ static int init_per_node(struct gfs2_sbd *sdp, int undo)
iput(pn);
pn = NULL;
- ip = GFS2_I(sdp->sd_sc_inode);
- error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0,
- &sdp->sd_sc_gh);
- if (error) {
- fs_err(sdp, "can't lock local \"sc\" file: %d\n", error);
- goto fail_qc_i;
- }
-
ip = GFS2_I(sdp->sd_qc_inode);
error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0,
&sdp->sd_qc_gh);
if (error) {
fs_err(sdp, "can't lock local \"qc\" file: %d\n", error);
- goto fail_ut_gh;
+ goto fail_qc_i;
}
return 0;
fail_qc_gh:
gfs2_glock_dq_uninit(&sdp->sd_qc_gh);
-fail_ut_gh:
- gfs2_glock_dq_uninit(&sdp->sd_sc_gh);
fail_qc_i:
iput(sdp->sd_qc_inode);
fail_ut_i:
- iput(sdp->sd_sc_inode);
-fail:
iput(pn);
return error;
}
@@ -1062,26 +1129,14 @@ static int gfs2_fill_super(struct super_block *sb, struct fs_context *fc)
}
error = init_names(sdp, silent);
- if (error) {
- /* In this case, we haven't initialized sysfs, so we have to
- manually free the sdp. */
- free_sbd(sdp);
- sb->s_fs_info = NULL;
- return error;
- }
+ if (error)
+ goto fail_free;
snprintf(sdp->sd_fsname, sizeof(sdp->sd_fsname), "%s", sdp->sd_table_name);
error = gfs2_sys_fs_add(sdp);
- /*
- * If we hit an error here, gfs2_sys_fs_add will have called function
- * kobject_put which causes the sysfs usage count to go to zero, which
- * causes sysfs to call function gfs2_sbd_release, which frees sdp.
- * Subsequent error paths here will call gfs2_sys_fs_del, which also
- * kobject_put to free sdp.
- */
if (error)
- return error;
+ goto fail_free;
gfs2_create_debugfs_file(sdp);
@@ -1179,9 +1234,9 @@ static int gfs2_fill_super(struct super_block *sb, struct fs_context *fc)
gfs2_lm_unmount(sdp);
fail_debug:
gfs2_delete_debugfs_file(sdp);
- /* gfs2_sys_fs_del must be the last thing we do, since it causes
- * sysfs to call function gfs2_sbd_release, which frees sdp. */
gfs2_sys_fs_del(sdp);
+fail_free:
+ free_sbd(sdp);
sb->s_fs_info = NULL;
return error;
}
diff --git a/fs/gfs2/recovery.c b/fs/gfs2/recovery.c
index 390ea79..b5cbe21 100644
--- a/fs/gfs2/recovery.c
+++ b/fs/gfs2/recovery.c
@@ -144,6 +144,10 @@ int __get_log_header(struct gfs2_sbd *sdp, const struct gfs2_log_header *lh,
head->lh_tail = be32_to_cpu(lh->lh_tail);
head->lh_blkno = be32_to_cpu(lh->lh_blkno);
+ head->lh_local_total = be64_to_cpu(lh->lh_local_total);
+ head->lh_local_free = be64_to_cpu(lh->lh_local_free);
+ head->lh_local_dinodes = be64_to_cpu(lh->lh_local_dinodes);
+
return 0;
}
/**
@@ -292,6 +296,109 @@ static void gfs2_recovery_done(struct gfs2_sbd *sdp, unsigned int jid,
sdp->sd_lockstruct.ls_ops->lm_recovery_result(sdp, jid, message);
}
+/**
+ * update_statfs_inode - Update the master statfs inode or zero out the local
+ * statfs inode for a given journal.
+ * @jd: The journal
+ * @head: If NULL, @inode is the local statfs inode and we need to zero it out.
+ * Otherwise, it @head contains the statfs change info that needs to be
+ * synced to the master statfs inode (pointed to by @inode).
+ * @inode: statfs inode to update.
+ */
+static int update_statfs_inode(struct gfs2_jdesc *jd,
+ struct gfs2_log_header_host *head,
+ struct inode *inode)
+{
+ struct gfs2_sbd *sdp = GFS2_SB(jd->jd_inode);
+ struct gfs2_inode *ip;
+ struct buffer_head *bh;
+ struct gfs2_statfs_change_host sc;
+ int error = 0;
+
+ BUG_ON(!inode);
+ ip = GFS2_I(inode);
+
+ error = gfs2_meta_inode_buffer(ip, &bh);
+ if (error)
+ goto out;
+
+ spin_lock(&sdp->sd_statfs_spin);
+
+ if (head) { /* Update the master statfs inode */
+ gfs2_statfs_change_in(&sc, bh->b_data + sizeof(struct gfs2_dinode));
+ sc.sc_total += head->lh_local_total;
+ sc.sc_free += head->lh_local_free;
+ sc.sc_dinodes += head->lh_local_dinodes;
+ gfs2_statfs_change_out(&sc, bh->b_data + sizeof(struct gfs2_dinode));
+
+ fs_info(sdp, "jid=%u: Updated master statfs Total:%lld, "
+ "Free:%lld, Dinodes:%lld after change "
+ "[%+lld,%+lld,%+lld]\n", jd->jd_jid, sc.sc_total,
+ sc.sc_free, sc.sc_dinodes, head->lh_local_total,
+ head->lh_local_free, head->lh_local_dinodes);
+ } else { /* Zero out the local statfs inode */
+ memset(bh->b_data + sizeof(struct gfs2_dinode), 0,
+ sizeof(struct gfs2_statfs_change));
+ /* If it's our own journal, reset any in-memory changes too */
+ if (jd->jd_jid == sdp->sd_lockstruct.ls_jid) {
+ memset(&sdp->sd_statfs_local, 0,
+ sizeof(struct gfs2_statfs_change_host));
+ }
+ }
+ spin_unlock(&sdp->sd_statfs_spin);
+
+ mark_buffer_dirty(bh);
+ brelse(bh);
+ gfs2_meta_sync(ip->i_gl);
+
+out:
+ return error;
+}
+
+/**
+ * recover_local_statfs - Update the master and local statfs changes for this
+ * journal.
+ *
+ * Previously, statfs updates would be read in from the local statfs inode and
+ * synced to the master statfs inode during recovery.
+ *
+ * We now use the statfs updates in the journal head to update the master statfs
+ * inode instead of reading in from the local statfs inode. To preserve backward
+ * compatibility with kernels that can't do this, we still need to keep the
+ * local statfs inode up to date by writing changes to it. At some point in the
+ * future, we can do away with the local statfs inodes altogether and keep the
+ * statfs changes solely in the journal.
+ *
+ * @jd: the journal
+ * @head: the journal head
+ *
+ * Returns: errno
+ */
+static void recover_local_statfs(struct gfs2_jdesc *jd,
+ struct gfs2_log_header_host *head)
+{
+ int error;
+ struct gfs2_sbd *sdp = GFS2_SB(jd->jd_inode);
+
+ if (!head->lh_local_total && !head->lh_local_free
+ && !head->lh_local_dinodes) /* No change */
+ goto zero_local;
+
+ /* First update the master statfs inode with the changes we
+ * found in the journal. */
+ error = update_statfs_inode(jd, head, sdp->sd_statfs_inode);
+ if (error)
+ goto out;
+
+zero_local:
+ /* Zero out the local statfs inode so any changes in there
+ * are not re-recovered. */
+ error = update_statfs_inode(jd, NULL,
+ find_local_statfs_inode(sdp, jd->jd_jid));
+out:
+ return;
+}
+
void gfs2_recover_func(struct work_struct *work)
{
struct gfs2_jdesc *jd = container_of(work, struct gfs2_jdesc, jd_work);
@@ -411,6 +518,7 @@ void gfs2_recover_func(struct work_struct *work)
goto fail_gunlock_thaw;
}
+ recover_local_statfs(jd, &head);
clean_journal(jd, &head);
up_read(&sdp->sd_log_flush_lock);
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 074f228..ee491bb 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -878,7 +878,6 @@ static int rgd_insert(struct gfs2_rgrpd *rgd)
static int read_rindex_entry(struct gfs2_inode *ip)
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
- const unsigned bsize = sdp->sd_sb.sb_bsize;
loff_t pos = sdp->sd_rgrps * sizeof(struct gfs2_rindex);
struct gfs2_rindex buf;
int error;
@@ -924,9 +923,6 @@ static int read_rindex_entry(struct gfs2_inode *ip)
spin_unlock(&sdp->sd_rindex_spin);
if (!error) {
glock_set_object(rgd->rd_gl, rgd);
- rgd->rd_gl->gl_vm.start = (rgd->rd_addr * bsize) & PAGE_MASK;
- rgd->rd_gl->gl_vm.end = PAGE_ALIGN((rgd->rd_addr +
- rgd->rd_length) * bsize) - 1;
return 0;
}
@@ -2209,20 +2205,17 @@ static void rgblk_free(struct gfs2_sbd *sdp, struct gfs2_rgrpd *rgd,
/**
* gfs2_rgrp_dump - print out an rgrp
* @seq: The iterator
- * @gl: The glock in question
+ * @rgd: The rgrp in question
* @fs_id_buf: pointer to file system id (if requested)
*
*/
-void gfs2_rgrp_dump(struct seq_file *seq, struct gfs2_glock *gl,
+void gfs2_rgrp_dump(struct seq_file *seq, struct gfs2_rgrpd *rgd,
const char *fs_id_buf)
{
- struct gfs2_rgrpd *rgd = gl->gl_object;
struct gfs2_blkreserv *trs;
const struct rb_node *n;
- if (rgd == NULL)
- return;
gfs2_print_dbg(seq, "%s R: n:%llu f:%02x b:%u/%u i:%u r:%u e:%u\n",
fs_id_buf,
(unsigned long long)rgd->rd_addr, rgd->rd_flags,
@@ -2253,7 +2246,7 @@ static void gfs2_rgrp_error(struct gfs2_rgrpd *rgd)
(unsigned long long)rgd->rd_addr);
fs_warn(sdp, "umount on all nodes and run fsck.gfs2 to fix the error\n");
sprintf(fs_id_buf, "fsid=%s: ", sdp->sd_fsname);
- gfs2_rgrp_dump(NULL, rgd->rd_gl, fs_id_buf);
+ gfs2_rgrp_dump(NULL, rgd, fs_id_buf);
rgd->rd_flags |= GFS2_RDF_ERROR;
}
@@ -2445,8 +2438,8 @@ void __gfs2_free_blocks(struct gfs2_inode *ip, struct gfs2_rgrpd *rgd,
gfs2_rgrp_out(rgd, rgd->rd_bits[0].bi_bh->b_data);
/* Directories keep their data in the metadata address space */
- if (meta || ip->i_depth)
- gfs2_meta_wipe(ip, bstart, blen);
+ if (meta || ip->i_depth || gfs2_is_jdata(ip))
+ gfs2_journal_wipe(ip, bstart, blen);
}
/**
@@ -2502,7 +2495,7 @@ void gfs2_free_di(struct gfs2_rgrpd *rgd, struct gfs2_inode *ip)
gfs2_statfs_change(sdp, 0, +1, -1);
trace_gfs2_block_alloc(ip, rgd, ip->i_no_addr, 1, GFS2_BLKST_FREE);
gfs2_quota_change(ip, -1, ip->i_inode.i_uid, ip->i_inode.i_gid);
- gfs2_meta_wipe(ip, ip->i_no_addr, 1);
+ gfs2_journal_wipe(ip, ip->i_no_addr, 1);
}
/**
diff --git a/fs/gfs2/rgrp.h b/fs/gfs2/rgrp.h
index a1d7e14..9a587ad 100644
--- a/fs/gfs2/rgrp.h
+++ b/fs/gfs2/rgrp.h
@@ -67,7 +67,7 @@ extern void gfs2_rlist_add(struct gfs2_inode *ip, struct gfs2_rgrp_list *rlist,
extern void gfs2_rlist_alloc(struct gfs2_rgrp_list *rlist);
extern void gfs2_rlist_free(struct gfs2_rgrp_list *rlist);
extern u64 gfs2_ri_total(struct gfs2_sbd *sdp);
-extern void gfs2_rgrp_dump(struct seq_file *seq, struct gfs2_glock *gl,
+extern void gfs2_rgrp_dump(struct seq_file *seq, struct gfs2_rgrpd *rgd,
const char *fs_id_buf);
extern int gfs2_rgrp_send_discards(struct gfs2_sbd *sdp, u64 offset,
struct buffer_head *bh,
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 9f4d9e7..b285192b 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -44,6 +44,12 @@
#include "xattr.h"
#include "lops.h"
+enum dinode_demise {
+ SHOULD_DELETE_DINODE,
+ SHOULD_NOT_DELETE_DINODE,
+ SHOULD_DEFER_EVICTION,
+};
+
/**
* gfs2_jindex_free - Clear all the journal index information
* @sdp: The GFS2 superblock
@@ -224,7 +230,7 @@ void gfs2_statfs_change_in(struct gfs2_statfs_change_host *sc, const void *buf)
sc->sc_dinodes = be64_to_cpu(str->sc_dinodes);
}
-static void gfs2_statfs_change_out(const struct gfs2_statfs_change_host *sc, void *buf)
+void gfs2_statfs_change_out(const struct gfs2_statfs_change_host *sc, void *buf)
{
struct gfs2_statfs_change *str = buf;
@@ -702,6 +708,8 @@ static void gfs2_put_super(struct super_block *sb)
if (error)
gfs2_io_error(sdp);
}
+ WARN_ON(gfs2_withdrawing(sdp));
+
/* At this point, we're through modifying the disk */
/* Release stuff */
@@ -721,7 +729,7 @@ static void gfs2_put_super(struct super_block *sb)
gfs2_glock_dq_uninit(&sdp->sd_jinode_gh);
gfs2_glock_dq_uninit(&sdp->sd_sc_gh);
gfs2_glock_dq_uninit(&sdp->sd_qc_gh);
- iput(sdp->sd_sc_inode);
+ free_local_statfs_inodes(sdp);
iput(sdp->sd_qc_inode);
}
@@ -736,6 +744,7 @@ static void gfs2_put_super(struct super_block *sb)
/* At this point, we're through participating in the lockspace */
gfs2_sys_fs_del(sdp);
+ free_sbd(sdp);
}
/**
@@ -1309,6 +1318,145 @@ static bool gfs2_upgrade_iopen_glock(struct inode *inode)
}
/**
+ * evict_should_delete - determine whether the inode is eligible for deletion
+ * @inode: The inode to evict
+ *
+ * This function determines whether the evicted inode is eligible to be deleted
+ * and locks the inode glock.
+ *
+ * Returns: the fate of the dinode
+ */
+static enum dinode_demise evict_should_delete(struct inode *inode,
+ struct gfs2_holder *gh)
+{
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct super_block *sb = inode->i_sb;
+ struct gfs2_sbd *sdp = sb->s_fs_info;
+ int ret;
+
+ if (test_bit(GIF_ALLOC_FAILED, &ip->i_flags)) {
+ BUG_ON(!gfs2_glock_is_locked_by_me(ip->i_gl));
+ goto should_delete;
+ }
+
+ if (test_bit(GIF_DEFERRED_DELETE, &ip->i_flags))
+ return SHOULD_DEFER_EVICTION;
+
+ /* Deletes should never happen under memory pressure anymore. */
+ if (WARN_ON_ONCE(current->flags & PF_MEMALLOC))
+ return SHOULD_DEFER_EVICTION;
+
+ /* Must not read inode block until block type has been verified */
+ ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, GL_SKIP, gh);
+ if (unlikely(ret)) {
+ glock_clear_object(ip->i_iopen_gh.gh_gl, ip);
+ ip->i_iopen_gh.gh_flags |= GL_NOCACHE;
+ gfs2_glock_dq_uninit(&ip->i_iopen_gh);
+ return SHOULD_DEFER_EVICTION;
+ }
+
+ if (gfs2_inode_already_deleted(ip->i_gl, ip->i_no_formal_ino))
+ return SHOULD_NOT_DELETE_DINODE;
+ ret = gfs2_check_blk_type(sdp, ip->i_no_addr, GFS2_BLKST_UNLINKED);
+ if (ret)
+ return SHOULD_NOT_DELETE_DINODE;
+
+ if (test_bit(GIF_INVALID, &ip->i_flags)) {
+ ret = gfs2_inode_refresh(ip);
+ if (ret)
+ return SHOULD_NOT_DELETE_DINODE;
+ }
+
+ /*
+ * The inode may have been recreated in the meantime.
+ */
+ if (inode->i_nlink)
+ return SHOULD_NOT_DELETE_DINODE;
+
+should_delete:
+ if (gfs2_holder_initialized(&ip->i_iopen_gh) &&
+ test_bit(HIF_HOLDER, &ip->i_iopen_gh.gh_iflags)) {
+ if (!gfs2_upgrade_iopen_glock(inode)) {
+ gfs2_holder_uninit(&ip->i_iopen_gh);
+ return SHOULD_NOT_DELETE_DINODE;
+ }
+ }
+ return SHOULD_DELETE_DINODE;
+}
+
+/**
+ * evict_unlinked_inode - delete the pieces of an unlinked evicted inode
+ * @inode: The inode to evict
+ */
+static int evict_unlinked_inode(struct inode *inode)
+{
+ struct gfs2_inode *ip = GFS2_I(inode);
+ int ret;
+
+ if (S_ISDIR(inode->i_mode) &&
+ (ip->i_diskflags & GFS2_DIF_EXHASH)) {
+ ret = gfs2_dir_exhash_dealloc(ip);
+ if (ret)
+ goto out;
+ }
+
+ if (ip->i_eattr) {
+ ret = gfs2_ea_dealloc(ip);
+ if (ret)
+ goto out;
+ }
+
+ if (!gfs2_is_stuffed(ip)) {
+ ret = gfs2_file_dealloc(ip);
+ if (ret)
+ goto out;
+ }
+
+ /* We're about to clear the bitmap for the dinode, but as soon as we
+ do, gfs2_create_inode can create another inode at the same block
+ location and try to set gl_object again. We clear gl_object here so
+ that subsequent inode creates don't see an old gl_object. */
+ glock_clear_object(ip->i_gl, ip);
+ ret = gfs2_dinode_dealloc(ip);
+ gfs2_inode_remember_delete(ip->i_gl, ip->i_no_formal_ino);
+out:
+ return ret;
+}
+
+/*
+ * evict_linked_inode - evict an inode whose dinode has not been unlinked
+ * @inode: The inode to evict
+ */
+static int evict_linked_inode(struct inode *inode)
+{
+ struct super_block *sb = inode->i_sb;
+ struct gfs2_sbd *sdp = sb->s_fs_info;
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct address_space *metamapping;
+ int ret;
+
+ gfs2_log_flush(sdp, ip->i_gl, GFS2_LOG_HEAD_FLUSH_NORMAL |
+ GFS2_LFC_EVICT_INODE);
+ metamapping = gfs2_glock2aspace(ip->i_gl);
+ if (test_bit(GLF_DIRTY, &ip->i_gl->gl_flags)) {
+ filemap_fdatawrite(metamapping);
+ filemap_fdatawait(metamapping);
+ }
+ write_inode_now(inode, 1);
+ gfs2_ail_flush(ip->i_gl, 0);
+
+ ret = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);
+ if (ret)
+ return ret;
+
+ /* Needs to be done before glock release & also in a transaction */
+ truncate_inode_pages(&inode->i_data, 0);
+ truncate_inode_pages(metamapping, 0);
+ gfs2_trans_end(sdp);
+ return 0;
+}
+
+/**
* gfs2_evict_inode - Remove an inode from cache
* @inode: The inode to evict
*
@@ -1335,8 +1483,7 @@ static void gfs2_evict_inode(struct inode *inode)
struct gfs2_sbd *sdp = sb->s_fs_info;
struct gfs2_inode *ip = GFS2_I(inode);
struct gfs2_holder gh;
- struct address_space *metamapping;
- int error;
+ int ret;
if (test_bit(GIF_FREE_VFS_INODE, &ip->i_flags)) {
clear_inode(inode);
@@ -1346,103 +1493,15 @@ static void gfs2_evict_inode(struct inode *inode)
if (inode->i_nlink || sb_rdonly(sb))
goto out;
- if (test_bit(GIF_ALLOC_FAILED, &ip->i_flags)) {
- BUG_ON(!gfs2_glock_is_locked_by_me(ip->i_gl));
- gfs2_holder_mark_uninitialized(&gh);
- goto out_delete;
- }
-
- if (test_bit(GIF_DEFERRED_DELETE, &ip->i_flags))
+ gfs2_holder_mark_uninitialized(&gh);
+ ret = evict_should_delete(inode, &gh);
+ if (ret == SHOULD_DEFER_EVICTION)
goto out;
+ if (ret == SHOULD_DELETE_DINODE)
+ ret = evict_unlinked_inode(inode);
+ else
+ ret = evict_linked_inode(inode);
- /* Deletes should never happen under memory pressure anymore. */
- if (WARN_ON_ONCE(current->flags & PF_MEMALLOC))
- goto out;
-
- /* Must not read inode block until block type has been verified */
- error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, GL_SKIP, &gh);
- if (unlikely(error)) {
- glock_clear_object(ip->i_iopen_gh.gh_gl, ip);
- ip->i_iopen_gh.gh_flags |= GL_NOCACHE;
- gfs2_glock_dq_uninit(&ip->i_iopen_gh);
- goto out;
- }
-
- if (gfs2_inode_already_deleted(ip->i_gl, ip->i_no_formal_ino))
- goto out_truncate;
- error = gfs2_check_blk_type(sdp, ip->i_no_addr, GFS2_BLKST_UNLINKED);
- if (error)
- goto out_truncate;
-
- if (test_bit(GIF_INVALID, &ip->i_flags)) {
- error = gfs2_inode_refresh(ip);
- if (error)
- goto out_truncate;
- }
-
- /*
- * The inode may have been recreated in the meantime.
- */
- if (inode->i_nlink)
- goto out_truncate;
-
-out_delete:
- if (gfs2_holder_initialized(&ip->i_iopen_gh) &&
- test_bit(HIF_HOLDER, &ip->i_iopen_gh.gh_iflags)) {
- if (!gfs2_upgrade_iopen_glock(inode)) {
- gfs2_holder_uninit(&ip->i_iopen_gh);
- goto out_truncate;
- }
- }
-
- if (S_ISDIR(inode->i_mode) &&
- (ip->i_diskflags & GFS2_DIF_EXHASH)) {
- error = gfs2_dir_exhash_dealloc(ip);
- if (error)
- goto out_unlock;
- }
-
- if (ip->i_eattr) {
- error = gfs2_ea_dealloc(ip);
- if (error)
- goto out_unlock;
- }
-
- if (!gfs2_is_stuffed(ip)) {
- error = gfs2_file_dealloc(ip);
- if (error)
- goto out_unlock;
- }
-
- /* We're about to clear the bitmap for the dinode, but as soon as we
- do, gfs2_create_inode can create another inode at the same block
- location and try to set gl_object again. We clear gl_object here so
- that subsequent inode creates don't see an old gl_object. */
- glock_clear_object(ip->i_gl, ip);
- error = gfs2_dinode_dealloc(ip);
- gfs2_inode_remember_delete(ip->i_gl, ip->i_no_formal_ino);
- goto out_unlock;
-
-out_truncate:
- gfs2_log_flush(sdp, ip->i_gl, GFS2_LOG_HEAD_FLUSH_NORMAL |
- GFS2_LFC_EVICT_INODE);
- metamapping = gfs2_glock2aspace(ip->i_gl);
- if (test_bit(GLF_DIRTY, &ip->i_gl->gl_flags)) {
- filemap_fdatawrite(metamapping);
- filemap_fdatawait(metamapping);
- }
- write_inode_now(inode, 1);
- gfs2_ail_flush(ip->i_gl, 0);
-
- error = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);
- if (error)
- goto out_unlock;
- /* Needs to be done before glock release & also in a transaction */
- truncate_inode_pages(&inode->i_data, 0);
- truncate_inode_pages(metamapping, 0);
- gfs2_trans_end(sdp);
-
-out_unlock:
if (gfs2_rs_active(&ip->i_res))
gfs2_rs_deltree(&ip->i_res);
@@ -1450,8 +1509,8 @@ static void gfs2_evict_inode(struct inode *inode)
glock_clear_object(ip->i_gl, ip);
gfs2_glock_dq_uninit(&gh);
}
- if (error && error != GLR_TRYFAILED && error != -EROFS)
- fs_warn(sdp, "gfs2_evict_inode: %d\n", error);
+ if (ret && ret != GLR_TRYFAILED && ret != -EROFS)
+ fs_warn(sdp, "gfs2_evict_inode: %d\n", ret);
out:
truncate_inode_pages_final(&inode->i_data);
if (ip->i_qadata)
@@ -1502,6 +1561,35 @@ static void gfs2_free_inode(struct inode *inode)
kmem_cache_free(gfs2_inode_cachep, GFS2_I(inode));
}
+extern void free_local_statfs_inodes(struct gfs2_sbd *sdp)
+{
+ struct local_statfs_inode *lsi, *safe;
+
+ /* Run through the statfs inodes list to iput and free memory */
+ list_for_each_entry_safe(lsi, safe, &sdp->sd_sc_inodes_list, si_list) {
+ if (lsi->si_jid == sdp->sd_jdesc->jd_jid)
+ sdp->sd_sc_inode = NULL; /* belongs to this node */
+ if (lsi->si_sc_inode)
+ iput(lsi->si_sc_inode);
+ list_del(&lsi->si_list);
+ kfree(lsi);
+ }
+}
+
+extern struct inode *find_local_statfs_inode(struct gfs2_sbd *sdp,
+ unsigned int index)
+{
+ struct local_statfs_inode *lsi;
+
+ /* Return the local (per node) statfs inode in the
+ * sdp->sd_sc_inodes_list corresponding to the 'index'. */
+ list_for_each_entry(lsi, &sdp->sd_sc_inodes_list, si_list) {
+ if (lsi->si_jid == index)
+ return lsi->si_sc_inode;
+ }
+ return NULL;
+}
+
const struct super_operations gfs2_super_ops = {
.alloc_inode = gfs2_alloc_inode,
.free_inode = gfs2_free_inode,
diff --git a/fs/gfs2/super.h b/fs/gfs2/super.h
index 5190055..c9fb2a6 100644
--- a/fs/gfs2/super.h
+++ b/fs/gfs2/super.h
@@ -37,11 +37,16 @@ extern void gfs2_statfs_change(struct gfs2_sbd *sdp, s64 total, s64 free,
s64 dinodes);
extern void gfs2_statfs_change_in(struct gfs2_statfs_change_host *sc,
const void *buf);
+extern void gfs2_statfs_change_out(const struct gfs2_statfs_change_host *sc,
+ void *buf);
extern void update_statfs(struct gfs2_sbd *sdp, struct buffer_head *m_bh,
struct buffer_head *l_bh);
extern int gfs2_statfs_sync(struct super_block *sb, int type);
extern void gfs2_freeze_func(struct work_struct *work);
+extern void free_local_statfs_inodes(struct gfs2_sbd *sdp);
+extern struct inode *find_local_statfs_inode(struct gfs2_sbd *sdp,
+ unsigned int index);
extern void free_sbd(struct gfs2_sbd *sdp);
extern struct file_system_type gfs2_fs_type;
diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c
index d28c41b..c3e72db 100644
--- a/fs/gfs2/sys.c
+++ b/fs/gfs2/sys.c
@@ -303,7 +303,7 @@ static void gfs2_sbd_release(struct kobject *kobj)
{
struct gfs2_sbd *sdp = container_of(kobj, struct gfs2_sbd, sd_kobj);
- free_sbd(sdp);
+ complete(&sdp->sd_kobj_unregister);
}
static struct kobj_type gfs2_ktype = {
@@ -655,6 +655,7 @@ int gfs2_sys_fs_add(struct gfs2_sbd *sdp)
sprintf(ro, "RDONLY=%d", sb_rdonly(sb));
sprintf(spectator, "SPECTATOR=%d", sdp->sd_args.ar_spectator ? 1 : 0);
+ init_completion(&sdp->sd_kobj_unregister);
sdp->sd_kobj.kset = gfs2_kset;
error = kobject_init_and_add(&sdp->sd_kobj, &gfs2_ktype, NULL,
"%s", sdp->sd_table_name);
@@ -685,6 +686,7 @@ int gfs2_sys_fs_add(struct gfs2_sbd *sdp)
fail_reg:
fs_err(sdp, "error %d adding sysfs files\n", error);
kobject_put(&sdp->sd_kobj);
+ wait_for_completion(&sdp->sd_kobj_unregister);
sb->s_fs_info = NULL;
return error;
}
@@ -695,6 +697,7 @@ void gfs2_sys_fs_del(struct gfs2_sbd *sdp)
sysfs_remove_group(&sdp->sd_kobj, &tune_group);
sysfs_remove_group(&sdp->sd_kobj, &lock_module_group);
kobject_put(&sdp->sd_kobj);
+ wait_for_completion(&sdp->sd_kobj_unregister);
}
static int gfs2_uevent(struct kset *kset, struct kobject *kobj,
diff --git a/fs/gfs2/trace_gfs2.h b/fs/gfs2/trace_gfs2.h
index e002525..0b2f858d 100644
--- a/fs/gfs2/trace_gfs2.h
+++ b/fs/gfs2/trace_gfs2.h
@@ -56,7 +56,6 @@
{(1UL << GLF_REPLY_PENDING), "r" }, \
{(1UL << GLF_INITIAL), "I" }, \
{(1UL << GLF_FROZEN), "F" }, \
- {(1UL << GLF_QUEUED), "q" }, \
{(1UL << GLF_LRU), "L" }, \
{(1UL << GLF_OBJECT), "o" }, \
{(1UL << GLF_BLOCKING), "b" })
@@ -388,15 +387,17 @@ TRACE_EVENT(gfs2_log_blocks,
TP_STRUCT__entry(
__field( dev_t, dev )
__field( int, blocks )
+ __field( int, blks_free )
),
TP_fast_assign(
__entry->dev = sdp->sd_vfs->s_dev;
__entry->blocks = blocks;
+ __entry->blks_free = atomic_read(&sdp->sd_log_blks_free);
),
- TP_printk("%u,%u log reserve %d", MAJOR(__entry->dev),
- MINOR(__entry->dev), __entry->blocks)
+ TP_printk("%u,%u log reserve %d %d", MAJOR(__entry->dev),
+ MINOR(__entry->dev), __entry->blocks, __entry->blks_free)
);
/* Writing back the AIL */
diff --git a/fs/gfs2/util.c b/fs/gfs2/util.c
index 1cd0328..0fba3bf 100644
--- a/fs/gfs2/util.c
+++ b/fs/gfs2/util.c
@@ -419,7 +419,7 @@ void gfs2_consist_rgrpd_i(struct gfs2_rgrpd *rgd,
char fs_id_buf[sizeof(sdp->sd_fsname) + 7];
sprintf(fs_id_buf, "fsid=%s: ", sdp->sd_fsname);
- gfs2_rgrp_dump(NULL, rgd->rd_gl, fs_id_buf);
+ gfs2_rgrp_dump(NULL, rgd, fs_id_buf);
gfs2_lm(sdp,
"fatal: filesystem consistency error\n"
" RG = %llu\n"
diff --git a/fs/gfs2/util.h b/fs/gfs2/util.h
index 6d9157e..d756298 100644
--- a/fs/gfs2/util.h
+++ b/fs/gfs2/util.h
@@ -205,6 +205,16 @@ static inline bool gfs2_withdrawn(struct gfs2_sbd *sdp)
test_bit(SDF_WITHDRAWING, &sdp->sd_flags);
}
+/**
+ * gfs2_withdrawing - check if a withdraw is pending
+ * @sdp: the superblock
+ */
+static inline bool gfs2_withdrawing(struct gfs2_sbd *sdp)
+{
+ return test_bit(SDF_WITHDRAWING, &sdp->sd_flags) &&
+ !test_bit(SDF_WITHDRAWN, &sdp->sd_flags);
+}
+
#define gfs2_tune_get(sdp, field) \
gfs2_tune_get_i(&(sdp)->sd_tune, &(sdp)->sd_tune.field)
diff --git a/fs/hfs/super.c b/fs/hfs/super.c
index c333246..44d07c9 100644
--- a/fs/hfs/super.c
+++ b/fs/hfs/super.c
@@ -104,8 +104,7 @@ static int hfs_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_bavail = buf->f_bfree;
buf->f_files = HFS_SB(sb)->fs_ablocks;
buf->f_ffree = HFS_SB(sb)->free_ablocks;
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
buf->f_namelen = HFS_NAMELEN;
return 0;
diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c
index 129dca3..807119a 100644
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -320,8 +320,7 @@ static int hfsplus_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_bavail = buf->f_bfree;
buf->f_files = 0xFFFFFFFF;
buf->f_ffree = 0xFFFFFFFF - sbi->next_cnid;
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
buf->f_namelen = HFSPLUS_MAX_STRLEN;
return 0;
diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c
index 0a677a9..a7dbfc8 100644
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -192,8 +192,7 @@ static int hpfs_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_bavail = sbi->sb_n_free;
buf->f_files = sbi->sb_dirband_size / 4;
buf->f_ffree = hpfs_get_free_dnodes(s);
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
buf->f_namelen = 254;
hpfs_unlock(s);
diff --git a/fs/io-wq.c b/fs/io-wq.c
index 7cb3b4c..02894df7 100644
--- a/fs/io-wq.c
+++ b/fs/io-wq.c
@@ -19,7 +19,9 @@
#include <linux/task_work.h>
#include <linux/blk-cgroup.h>
#include <linux/audit.h>
+#include <linux/cpu.h>
+#include "../kernel/sched/sched.h"
#include "io-wq.h"
#define WORKER_IDLE_TIMEOUT (5 * HZ)
@@ -123,9 +125,13 @@ struct io_wq {
refcount_t refs;
struct completion done;
+ struct hlist_node cpuhp_node;
+
refcount_t use_refs;
};
+static enum cpuhp_state io_wq_online;
+
static bool io_worker_get(struct io_worker *worker)
{
return refcount_inc_not_zero(&worker->ref);
@@ -187,7 +193,8 @@ static bool __io_worker_unuse(struct io_wqe *wqe, struct io_worker *worker)
worker->blkcg_css = NULL;
}
#endif
-
+ if (current->signal->rlim[RLIMIT_FSIZE].rlim_cur != RLIM_INFINITY)
+ current->signal->rlim[RLIMIT_FSIZE].rlim_cur = RLIM_INFINITY;
return dropped_lock;
}
@@ -483,7 +490,10 @@ static void io_impersonate_work(struct io_worker *worker,
if ((work->flags & IO_WQ_WORK_CREDS) &&
worker->cur_creds != work->identity->creds)
io_wq_switch_creds(worker, work);
- current->signal->rlim[RLIMIT_FSIZE].rlim_cur = work->identity->fsize;
+ if (work->flags & IO_WQ_WORK_FSIZE)
+ current->signal->rlim[RLIMIT_FSIZE].rlim_cur = work->identity->fsize;
+ else if (current->signal->rlim[RLIMIT_FSIZE].rlim_cur != RLIM_INFINITY)
+ current->signal->rlim[RLIMIT_FSIZE].rlim_cur = RLIM_INFINITY;
io_wq_switch_blkcg(worker, work);
#ifdef CONFIG_AUDIT
current->loginuid = work->identity->loginuid;
@@ -1087,10 +1097,12 @@ struct io_wq *io_wq_create(unsigned bounded, struct io_wq_data *data)
return ERR_PTR(-ENOMEM);
wq->wqes = kcalloc(nr_node_ids, sizeof(struct io_wqe *), GFP_KERNEL);
- if (!wq->wqes) {
- kfree(wq);
- return ERR_PTR(-ENOMEM);
- }
+ if (!wq->wqes)
+ goto err_wq;
+
+ ret = cpuhp_state_add_instance_nocalls(io_wq_online, &wq->cpuhp_node);
+ if (ret)
+ goto err_wqes;
wq->free_work = data->free_work;
wq->do_work = data->do_work;
@@ -1098,6 +1110,7 @@ struct io_wq *io_wq_create(unsigned bounded, struct io_wq_data *data)
/* caller must already hold a reference to this */
wq->user = data->user;
+ ret = -ENOMEM;
for_each_node(node) {
struct io_wqe *wqe;
int alloc_node = node;
@@ -1141,9 +1154,12 @@ struct io_wq *io_wq_create(unsigned bounded, struct io_wq_data *data)
ret = PTR_ERR(wq->manager);
complete(&wq->done);
err:
+ cpuhp_state_remove_instance_nocalls(io_wq_online, &wq->cpuhp_node);
for_each_node(node)
kfree(wq->wqes[node]);
+err_wqes:
kfree(wq->wqes);
+err_wq:
kfree(wq);
return ERR_PTR(ret);
}
@@ -1160,6 +1176,8 @@ static void __io_wq_destroy(struct io_wq *wq)
{
int node;
+ cpuhp_state_remove_instance_nocalls(io_wq_online, &wq->cpuhp_node);
+
set_bit(IO_WQ_BIT_EXIT, &wq->state);
if (wq->manager)
kthread_stop(wq->manager);
@@ -1187,3 +1205,41 @@ struct task_struct *io_wq_get_task(struct io_wq *wq)
{
return wq->manager;
}
+
+static bool io_wq_worker_affinity(struct io_worker *worker, void *data)
+{
+ struct task_struct *task = worker->task;
+ struct rq_flags rf;
+ struct rq *rq;
+
+ rq = task_rq_lock(task, &rf);
+ do_set_cpus_allowed(task, cpumask_of_node(worker->wqe->node));
+ task->flags |= PF_NO_SETAFFINITY;
+ task_rq_unlock(rq, task, &rf);
+ return false;
+}
+
+static int io_wq_cpu_online(unsigned int cpu, struct hlist_node *node)
+{
+ struct io_wq *wq = hlist_entry_safe(node, struct io_wq, cpuhp_node);
+ int i;
+
+ rcu_read_lock();
+ for_each_node(i)
+ io_wq_for_each_worker(wq->wqes[i], io_wq_worker_affinity, NULL);
+ rcu_read_unlock();
+ return 0;
+}
+
+static __init int io_wq_init(void)
+{
+ int ret;
+
+ ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, "io-wq/online",
+ io_wq_cpu_online, NULL);
+ if (ret < 0)
+ return ret;
+ io_wq_online = ret;
+ return 0;
+}
+subsys_initcall(io_wq_init);
diff --git a/fs/io-wq.h b/fs/io-wq.h
index be21c50..cba36f0 100644
--- a/fs/io-wq.h
+++ b/fs/io-wq.h
@@ -17,6 +17,7 @@ enum {
IO_WQ_WORK_MM = 128,
IO_WQ_WORK_CREDS = 256,
IO_WQ_WORK_BLKCG = 512,
+ IO_WQ_WORK_FSIZE = 1024,
IO_WQ_HASH_SHIFT = 24, /* upper 8 bits are used for hash key */
};
diff --git a/fs/io_uring.c b/fs/io_uring.c
index 626a9d1..b42dfa0 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -277,7 +277,7 @@ struct io_ring_ctx {
unsigned sq_mask;
unsigned sq_thread_idle;
unsigned cached_sq_dropped;
- atomic_t cached_cq_overflow;
+ unsigned cached_cq_overflow;
unsigned long sq_check_overflow;
struct list_head defer_list;
@@ -585,6 +585,7 @@ enum {
REQ_F_BUFFER_SELECTED_BIT,
REQ_F_NO_FILE_TABLE_BIT,
REQ_F_WORK_INITIALIZED_BIT,
+ REQ_F_LTIMEOUT_ACTIVE_BIT,
/* not a real bit, just to check we're not overflowing the space */
__REQ_F_LAST_BIT,
@@ -614,7 +615,7 @@ enum {
REQ_F_CUR_POS = BIT(REQ_F_CUR_POS_BIT),
/* must not punt to workers */
REQ_F_NOWAIT = BIT(REQ_F_NOWAIT_BIT),
- /* has linked timeout */
+ /* has or had linked timeout */
REQ_F_LINK_TIMEOUT = BIT(REQ_F_LINK_TIMEOUT_BIT),
/* regular file */
REQ_F_ISREG = BIT(REQ_F_ISREG_BIT),
@@ -628,6 +629,8 @@ enum {
REQ_F_NO_FILE_TABLE = BIT(REQ_F_NO_FILE_TABLE_BIT),
/* io_wq_work is initialized */
REQ_F_WORK_INITIALIZED = BIT(REQ_F_WORK_INITIALIZED_BIT),
+ /* linked timeout is active, i.e. prepared by link's head */
+ REQ_F_LTIMEOUT_ACTIVE = BIT(REQ_F_LTIMEOUT_ACTIVE_BIT),
};
struct async_poll {
@@ -750,8 +753,6 @@ struct io_op_def {
unsigned pollout : 1;
/* op supports buffer selection */
unsigned buffer_select : 1;
- /* needs rlimit(RLIMIT_FSIZE) assigned */
- unsigned needs_fsize : 1;
/* must always have async data allocated */
unsigned needs_async_data : 1;
/* size of async data needed, if any */
@@ -775,10 +776,10 @@ static const struct io_op_def io_op_defs[] = {
.hash_reg_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
- .needs_fsize = 1,
.needs_async_data = 1,
.async_size = sizeof(struct io_async_rw),
- .work_flags = IO_WQ_WORK_MM | IO_WQ_WORK_BLKCG,
+ .work_flags = IO_WQ_WORK_MM | IO_WQ_WORK_BLKCG |
+ IO_WQ_WORK_FSIZE,
},
[IORING_OP_FSYNC] = {
.needs_file = 1,
@@ -789,16 +790,16 @@ static const struct io_op_def io_op_defs[] = {
.unbound_nonreg_file = 1,
.pollin = 1,
.async_size = sizeof(struct io_async_rw),
- .work_flags = IO_WQ_WORK_BLKCG,
+ .work_flags = IO_WQ_WORK_BLKCG | IO_WQ_WORK_MM,
},
[IORING_OP_WRITE_FIXED] = {
.needs_file = 1,
.hash_reg_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
- .needs_fsize = 1,
.async_size = sizeof(struct io_async_rw),
- .work_flags = IO_WQ_WORK_BLKCG,
+ .work_flags = IO_WQ_WORK_BLKCG | IO_WQ_WORK_FSIZE |
+ IO_WQ_WORK_MM,
},
[IORING_OP_POLL_ADD] = {
.needs_file = 1,
@@ -856,8 +857,7 @@ static const struct io_op_def io_op_defs[] = {
},
[IORING_OP_FALLOCATE] = {
.needs_file = 1,
- .needs_fsize = 1,
- .work_flags = IO_WQ_WORK_BLKCG,
+ .work_flags = IO_WQ_WORK_BLKCG | IO_WQ_WORK_FSIZE,
},
[IORING_OP_OPENAT] = {
.work_flags = IO_WQ_WORK_FILES | IO_WQ_WORK_BLKCG |
@@ -887,9 +887,9 @@ static const struct io_op_def io_op_defs[] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
- .needs_fsize = 1,
.async_size = sizeof(struct io_async_rw),
- .work_flags = IO_WQ_WORK_MM | IO_WQ_WORK_BLKCG,
+ .work_flags = IO_WQ_WORK_MM | IO_WQ_WORK_BLKCG |
+ IO_WQ_WORK_FSIZE,
},
[IORING_OP_FADVISE] = {
.needs_file = 1,
@@ -1070,6 +1070,12 @@ static void io_init_identity(struct io_identity *id)
refcount_set(&id->count, 1);
}
+static inline void __io_req_init_async(struct io_kiocb *req)
+{
+ memset(&req->work, 0, sizeof(req->work));
+ req->flags |= REQ_F_WORK_INITIALIZED;
+}
+
/*
* Note: must call io_req_init_async() for the first time you
* touch any members of io_wq_work.
@@ -1081,8 +1087,7 @@ static inline void io_req_init_async(struct io_kiocb *req)
if (req->flags & REQ_F_WORK_INITIALIZED)
return;
- memset(&req->work, 0, sizeof(req->work));
- req->flags |= REQ_F_WORK_INITIALIZED;
+ __io_req_init_async(req);
/* Grab a ref if this isn't our static identity */
req->work.identity = tctx->identity;
@@ -1174,7 +1179,7 @@ static bool req_need_defer(struct io_kiocb *req, u32 seq)
struct io_ring_ctx *ctx = req->ctx;
return seq != ctx->cached_cq_tail
- + atomic_read(&ctx->cached_cq_overflow);
+ + READ_ONCE(ctx->cached_cq_overflow);
}
return false;
@@ -1285,8 +1290,11 @@ static bool io_grab_identity(struct io_kiocb *req)
struct io_identity *id = req->work.identity;
struct io_ring_ctx *ctx = req->ctx;
- if (def->needs_fsize && id->fsize != rlimit(RLIMIT_FSIZE))
- return false;
+ if (def->work_flags & IO_WQ_WORK_FSIZE) {
+ if (id->fsize != rlimit(RLIMIT_FSIZE))
+ return false;
+ req->work.flags |= IO_WQ_WORK_FSIZE;
+ }
if (!(req->work.flags & IO_WQ_WORK_FILES) &&
(def->work_flags & IO_WQ_WORK_FILES) &&
@@ -1619,8 +1627,9 @@ static bool io_cqring_overflow_flush(struct io_ring_ctx *ctx, bool force,
WRITE_ONCE(cqe->res, req->result);
WRITE_ONCE(cqe->flags, req->compl.cflags);
} else {
+ ctx->cached_cq_overflow++;
WRITE_ONCE(ctx->rings->cq_overflow,
- atomic_inc_return(&ctx->cached_cq_overflow));
+ ctx->cached_cq_overflow);
}
}
@@ -1662,8 +1671,8 @@ static void __io_cqring_fill_event(struct io_kiocb *req, long res, long cflags)
* then we cannot store the request for later flushing, we need
* to drop it on the floor.
*/
- WRITE_ONCE(ctx->rings->cq_overflow,
- atomic_inc_return(&ctx->cached_cq_overflow));
+ ctx->cached_cq_overflow++;
+ WRITE_ONCE(ctx->rings->cq_overflow, ctx->cached_cq_overflow);
} else {
if (list_empty(&ctx->cq_overflow_list)) {
set_bit(0, &ctx->sq_check_overflow);
@@ -1865,6 +1874,12 @@ static bool __io_kill_linked_timeout(struct io_kiocb *req)
link = list_first_entry(&req->link_list, struct io_kiocb, link_list);
if (link->opcode != IORING_OP_LINK_TIMEOUT)
return false;
+ /*
+ * Can happen if a linked timeout fired and link had been like
+ * req -> link t-out -> link t-out [-> ...]
+ */
+ if (!(link->flags & REQ_F_LTIMEOUT_ACTIVE))
+ return false;
list_del_init(&link->link_list);
wake_ev = io_link_cancel_timeout(link);
@@ -1908,10 +1923,12 @@ static struct io_kiocb *io_req_link_next(struct io_kiocb *req)
/*
* Called if REQ_F_LINK_HEAD is set, and we fail the head request
*/
-static void __io_fail_links(struct io_kiocb *req)
+static void io_fail_links(struct io_kiocb *req)
{
struct io_ring_ctx *ctx = req->ctx;
+ unsigned long flags;
+ spin_lock_irqsave(&ctx->completion_lock, flags);
while (!list_empty(&req->link_list)) {
struct io_kiocb *link = list_first_entry(&req->link_list,
struct io_kiocb, link_list);
@@ -1933,15 +1950,6 @@ static void __io_fail_links(struct io_kiocb *req)
}
io_commit_cqring(ctx);
-}
-
-static void io_fail_links(struct io_kiocb *req)
-{
- struct io_ring_ctx *ctx = req->ctx;
- unsigned long flags;
-
- spin_lock_irqsave(&ctx->completion_lock, flags);
- __io_fail_links(req);
spin_unlock_irqrestore(&ctx->completion_lock, flags);
io_cqring_ev_posted(ctx);
@@ -3109,9 +3117,10 @@ static inline loff_t *io_kiocb_ppos(struct kiocb *kiocb)
* For files that don't have ->read_iter() and ->write_iter(), handle them
* by looping over ->read() or ->write() manually.
*/
-static ssize_t loop_rw_iter(int rw, struct file *file, struct kiocb *kiocb,
- struct iov_iter *iter)
+static ssize_t loop_rw_iter(int rw, struct io_kiocb *req, struct iov_iter *iter)
{
+ struct kiocb *kiocb = &req->rw.kiocb;
+ struct file *file = req->file;
ssize_t ret = 0;
/*
@@ -3131,11 +3140,8 @@ static ssize_t loop_rw_iter(int rw, struct file *file, struct kiocb *kiocb,
if (!iov_iter_is_bvec(iter)) {
iovec = iov_iter_iovec(iter);
} else {
- /* fixed buffers import bvec */
- iovec.iov_base = kmap(iter->bvec->bv_page)
- + iter->iov_offset;
- iovec.iov_len = min(iter->count,
- iter->bvec->bv_len - iter->iov_offset);
+ iovec.iov_base = u64_to_user_ptr(req->rw.addr);
+ iovec.iov_len = req->rw.len;
}
if (rw == READ) {
@@ -3146,9 +3152,6 @@ static ssize_t loop_rw_iter(int rw, struct file *file, struct kiocb *kiocb,
iovec.iov_len, io_kiocb_ppos(kiocb));
}
- if (iov_iter_is_bvec(iter))
- kunmap(iter->bvec->bv_page);
-
if (nr < 0) {
if (!ret)
ret = nr;
@@ -3157,6 +3160,8 @@ static ssize_t loop_rw_iter(int rw, struct file *file, struct kiocb *kiocb,
ret += nr;
if (nr != iovec.iov_len)
break;
+ req->rw.len -= nr;
+ req->rw.addr += nr;
iov_iter_advance(iter, nr);
}
@@ -3346,7 +3351,7 @@ static int io_iter_do_read(struct io_kiocb *req, struct iov_iter *iter)
if (req->file->f_op->read_iter)
return call_read_iter(req->file, &req->rw.kiocb, iter);
else if (req->file->f_op->read)
- return loop_rw_iter(READ, req->file, &req->rw.kiocb, iter);
+ return loop_rw_iter(READ, req, iter);
else
return -EINVAL;
}
@@ -3537,7 +3542,7 @@ static int io_write(struct io_kiocb *req, bool force_nonblock,
if (req->file->f_op->write_iter)
ret2 = call_write_iter(req->file, kiocb, iter);
else if (req->file->f_op->write)
- ret2 = loop_rw_iter(WRITE, req->file, kiocb, iter);
+ ret2 = loop_rw_iter(WRITE, req, iter);
else
ret2 = -EINVAL;
@@ -4927,32 +4932,25 @@ static void io_poll_complete(struct io_kiocb *req, __poll_t mask, int error)
io_commit_cqring(ctx);
}
-static void io_poll_task_handler(struct io_kiocb *req, struct io_kiocb **nxt)
-{
- struct io_ring_ctx *ctx = req->ctx;
-
- if (io_poll_rewait(req, &req->poll)) {
- spin_unlock_irq(&ctx->completion_lock);
- return;
- }
-
- hash_del(&req->hash_node);
- io_poll_complete(req, req->result, 0);
- spin_unlock_irq(&ctx->completion_lock);
-
- *nxt = io_put_req_find_next(req);
- io_cqring_ev_posted(ctx);
-}
-
static void io_poll_task_func(struct callback_head *cb)
{
struct io_kiocb *req = container_of(cb, struct io_kiocb, task_work);
struct io_ring_ctx *ctx = req->ctx;
- struct io_kiocb *nxt = NULL;
+ struct io_kiocb *nxt;
- io_poll_task_handler(req, &nxt);
- if (nxt)
- __io_req_task_submit(nxt);
+ if (io_poll_rewait(req, &req->poll)) {
+ spin_unlock_irq(&ctx->completion_lock);
+ } else {
+ hash_del(&req->hash_node);
+ io_poll_complete(req, req->result, 0);
+ spin_unlock_irq(&ctx->completion_lock);
+
+ nxt = io_put_req_find_next(req);
+ io_cqring_ev_posted(ctx);
+ if (nxt)
+ __io_req_task_submit(nxt);
+ }
+
percpu_ref_put(&ctx->refs);
}
@@ -5106,6 +5104,7 @@ static __poll_t __io_arm_poll_handler(struct io_kiocb *req,
struct io_ring_ctx *ctx = req->ctx;
bool cancel = false;
+ INIT_HLIST_NODE(&req->hash_node);
io_init_poll_iocb(poll, mask, wake_func);
poll->file = req->file;
poll->wait.private = req;
@@ -5167,7 +5166,6 @@ static bool io_arm_poll_handler(struct io_kiocb *req)
req->flags |= REQ_F_POLLED;
req->apoll = apoll;
- INIT_HLIST_NODE(&req->hash_node);
mask = 0;
if (def->pollin)
@@ -5349,8 +5347,6 @@ static int io_poll_add_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe
return -EINVAL;
if (sqe->addr || sqe->ioprio || sqe->off || sqe->len || sqe->buf_index)
return -EINVAL;
- if (!poll->file)
- return -EBADF;
events = READ_ONCE(sqe->poll32_events);
#ifdef __BIG_ENDIAN
@@ -5368,7 +5364,6 @@ static int io_poll_add(struct io_kiocb *req)
struct io_poll_table ipt;
__poll_t mask;
- INIT_HLIST_NODE(&req->hash_node);
ipt.pt._qproc = io_poll_queue_proc;
mask = __io_arm_poll_handler(req, &req->poll, &ipt, poll->events,
@@ -6118,10 +6113,9 @@ static enum hrtimer_restart io_link_timeout_fn(struct hrtimer *timer)
if (!list_empty(&req->link_list)) {
prev = list_entry(req->link_list.prev, struct io_kiocb,
link_list);
- if (refcount_inc_not_zero(&prev->refs)) {
+ if (refcount_inc_not_zero(&prev->refs))
list_del_init(&req->link_list);
- prev->flags &= ~REQ_F_LINK_TIMEOUT;
- } else
+ else
prev = NULL;
}
@@ -6178,6 +6172,7 @@ static struct io_kiocb *io_prep_linked_timeout(struct io_kiocb *req)
if (!nxt || nxt->opcode != IORING_OP_LINK_TIMEOUT)
return NULL;
+ nxt->flags |= REQ_F_LTIMEOUT_ACTIVE;
req->flags |= REQ_F_LINK_TIMEOUT;
return nxt;
}
@@ -6192,7 +6187,8 @@ static void __io_queue_sqe(struct io_kiocb *req, struct io_comp_state *cs)
again:
linked_timeout = io_prep_linked_timeout(req);
- if ((req->flags & REQ_F_WORK_INITIALIZED) && req->work.identity->creds &&
+ if ((req->flags & REQ_F_WORK_INITIALIZED) &&
+ (req->work.flags & IO_WQ_WORK_CREDS) &&
req->work.identity->creds != current_cred()) {
if (old_creds)
revert_creds(old_creds);
@@ -6200,7 +6196,6 @@ static void __io_queue_sqe(struct io_kiocb *req, struct io_comp_state *cs)
old_creds = NULL; /* restored original creds */
else
old_creds = override_creds(req->work.identity->creds);
- req->work.flags |= IO_WQ_WORK_CREDS;
}
ret = io_issue_sqe(req, true, cs);
@@ -6241,8 +6236,10 @@ static void __io_queue_sqe(struct io_kiocb *req, struct io_comp_state *cs)
if (nxt) {
req = nxt;
- if (req->flags & REQ_F_FORCE_ASYNC)
+ if (req->flags & REQ_F_FORCE_ASYNC) {
+ linked_timeout = NULL;
goto punt;
+ }
goto again;
}
exit:
@@ -6505,12 +6502,12 @@ static int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req,
if (id) {
struct io_identity *iod;
- io_req_init_async(req);
iod = idr_find(&ctx->personality_idr, id);
if (unlikely(!iod))
return -EINVAL;
refcount_inc(&iod->count);
- io_put_identity(current->io_uring, req);
+
+ __io_req_init_async(req);
get_cred(iod->creds);
req->work.identity = iod;
req->work.flags |= IO_WQ_WORK_CREDS;
@@ -8686,19 +8683,11 @@ static void io_uring_del_task_file(struct file *file)
fput(file);
}
-static void __io_uring_attempt_task_drop(struct file *file)
-{
- struct file *old = xa_load(¤t->io_uring->xa, (unsigned long)file);
-
- if (old == file)
- io_uring_del_task_file(file);
-}
-
/*
* Drop task note for this file if we're the only ones that hold it after
* pending fput()
*/
-static void io_uring_attempt_task_drop(struct file *file, bool exiting)
+static void io_uring_attempt_task_drop(struct file *file)
{
if (!current->io_uring)
return;
@@ -8706,10 +8695,9 @@ static void io_uring_attempt_task_drop(struct file *file, bool exiting)
* fput() is pending, will be 2 if the only other ref is our potential
* task file note. If the task is exiting, drop regardless of count.
*/
- if (!exiting && atomic_long_read(&file->f_count) != 2)
- return;
-
- __io_uring_attempt_task_drop(file);
+ if (fatal_signal_pending(current) || (current->flags & PF_EXITING) ||
+ atomic_long_read(&file->f_count) == 2)
+ io_uring_del_task_file(file);
}
void __io_uring_files_cancel(struct files_struct *files)
@@ -8767,16 +8755,7 @@ void __io_uring_task_cancel(void)
static int io_uring_flush(struct file *file, void *data)
{
- struct io_ring_ctx *ctx = file->private_data;
-
- /*
- * If the task is going away, cancel work it may have pending
- */
- if (fatal_signal_pending(current) || (current->flags & PF_EXITING))
- data = NULL;
-
- io_uring_cancel_task_requests(ctx, data);
- io_uring_attempt_task_drop(file, !data);
+ io_uring_attempt_task_drop(file);
return 0;
}
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index 78f5c96..ec90773 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -1038,8 +1038,7 @@ static int isofs_statfs (struct dentry *dentry, struct kstatfs *buf)
buf->f_bavail = 0;
buf->f_files = ISOFS_SB(sb)->s_ninodes;
buf->f_ffree = 0;
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
buf->f_namelen = NAME_MAX;
return 0;
}
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index 7b09a91..34f5464 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -383,8 +383,7 @@ static int minix_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_files = sbi->s_ninodes;
buf->f_ffree = minix_count_free_inodes(sb);
buf->f_namelen = sbi->s_namelen;
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
return 0;
}
diff --git a/fs/namei.c b/fs/namei.c
index f1eb8cc..d4a6dd7 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1626,7 +1626,8 @@ static const char *pick_link(struct nameidata *nd, struct path *link,
return ERR_PTR(error);
}
- if (unlikely(nd->flags & LOOKUP_NO_SYMLINKS))
+ if (unlikely(nd->flags & LOOKUP_NO_SYMLINKS) ||
+ unlikely(link->mnt->mnt_flags & MNT_NOSYMFOLLOW))
return ERR_PTR(-ELOOP);
if (!(nd->flags & LOOKUP_RCU)) {
diff --git a/fs/namespace.c b/fs/namespace.c
index 1a75336..cebaa3e 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -3171,6 +3171,8 @@ int path_mount(const char *dev_name, struct path *path,
mnt_flags &= ~(MNT_RELATIME | MNT_NOATIME);
if (flags & MS_RDONLY)
mnt_flags |= MNT_READONLY;
+ if (flags & MS_NOSYMFOLLOW)
+ mnt_flags |= MNT_NOSYMFOLLOW;
/* The default atime for remount is preservation */
if ((flags & MS_REMOUNT) &&
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index 2eee5fb..4abd928 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -651,8 +651,7 @@ static int nilfs_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_files = nmaxinodes;
buf->f_ffree = nfreeinodes;
buf->f_namelen = NILFS_NAME_LEN;
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
return 0;
}
diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c
index 7dc3bc6..0d7e948 100644
--- a/fs/ntfs/super.c
+++ b/fs/ntfs/super.c
@@ -2643,8 +2643,7 @@ static int ntfs_statfs(struct dentry *dentry, struct kstatfs *sfs)
* the least significant 32-bits in f_fsid[0] and the most significant
* 32-bits in f_fsid[1].
*/
- sfs->f_fsid.val[0] = vol->serial_no & 0xffffffff;
- sfs->f_fsid.val[1] = (vol->serial_no >> 32) & 0xffffffff;
+ sfs->f_fsid = u64_to_fsid(vol->serial_no);
/* Maximum length of filenames. */
sfs->f_namelen = NTFS_MAX_NAME_LEN;
return 0;
diff --git a/fs/omfs/inode.c b/fs/omfs/inode.c
index b76ec6b..ce93ccc 100644
--- a/fs/omfs/inode.c
+++ b/fs/omfs/inode.c
@@ -282,8 +282,7 @@ static int omfs_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_blocks = sbi->s_num_blocks;
buf->f_files = sbi->s_num_blocks;
buf->f_namelen = OMFS_NAMELEN;
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
buf->f_bfree = buf->f_bavail = buf->f_ffree =
omfs_count_free(s);
@@ -363,12 +362,11 @@ static int omfs_get_imap(struct super_block *sb)
bh = sb_bread(sb, block++);
if (!bh)
goto nomem_free;
- *ptr = kmalloc(sb->s_blocksize, GFP_KERNEL);
+ *ptr = kmemdup(bh->b_data, sb->s_blocksize, GFP_KERNEL);
if (!*ptr) {
brelse(bh);
goto nomem_free;
}
- memcpy(*ptr, bh->b_data, sb->s_blocksize);
if (count < sb->s_blocksize)
memset((void *)*ptr + count, 0xff,
sb->s_blocksize - count);
diff --git a/fs/proc_namespace.c b/fs/proc_namespace.c
index 3059a93..e59d4bb 100644
--- a/fs/proc_namespace.c
+++ b/fs/proc_namespace.c
@@ -70,6 +70,7 @@ static void show_mnt_opts(struct seq_file *m, struct vfsmount *mnt)
{ MNT_NOATIME, ",noatime" },
{ MNT_NODIRATIME, ",nodiratime" },
{ MNT_RELATIME, ",relatime" },
+ { MNT_NOSYMFOLLOW, ",nosymfollow" },
{ 0, NULL }
};
const struct proc_fs_opts *fs_infop;
diff --git a/fs/qnx4/inode.c b/fs/qnx4/inode.c
index e8da1cd..3fb7fc8 100644
--- a/fs/qnx4/inode.c
+++ b/fs/qnx4/inode.c
@@ -137,8 +137,7 @@ static int qnx4_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_bfree = qnx4_count_free_blocks(sb);
buf->f_bavail = buf->f_bfree;
buf->f_namelen = QNX4_NAME_MAX;
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
return 0;
}
diff --git a/fs/qnx6/inode.c b/fs/qnx6/inode.c
index 755293c..61191f7b 100644
--- a/fs/qnx6/inode.c
+++ b/fs/qnx6/inode.c
@@ -166,8 +166,7 @@ static int qnx6_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_ffree = fs32_to_cpu(sbi, sbi->sb->sb_free_inodes);
buf->f_bavail = buf->f_bfree;
buf->f_namelen = QNX6_LONG_NAME_MAX;
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
return 0;
}
diff --git a/fs/romfs/super.c b/fs/romfs/super.c
index b1b7d3f..259f684 100644
--- a/fs/romfs/super.c
+++ b/fs/romfs/super.c
@@ -416,8 +416,7 @@ static int romfs_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_bfree = buf->f_bavail = buf->f_ffree;
buf->f_blocks =
(romfs_maxsize(dentry->d_sb) + ROMBSIZE - 1) >> ROMBSBITS;
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
return 0;
}
diff --git a/fs/splice.c b/fs/splice.c
index 599b740..866d5c2 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1005,9 +1005,8 @@ static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
/*
* Determine where to splice to/from.
*/
-long do_splice(struct file *in, loff_t __user *off_in,
- struct file *out, loff_t __user *off_out,
- size_t len, unsigned int flags)
+long do_splice(struct file *in, loff_t *off_in, struct file *out,
+ loff_t *off_out, size_t len, unsigned int flags)
{
struct pipe_inode_info *ipipe;
struct pipe_inode_info *opipe;
@@ -1041,8 +1040,7 @@ long do_splice(struct file *in, loff_t __user *off_in,
if (off_out) {
if (!(out->f_mode & FMODE_PWRITE))
return -EINVAL;
- if (copy_from_user(&offset, off_out, sizeof(loff_t)))
- return -EFAULT;
+ offset = *off_out;
} else {
offset = out->f_pos;
}
@@ -1063,8 +1061,8 @@ long do_splice(struct file *in, loff_t __user *off_in,
if (!off_out)
out->f_pos = offset;
- else if (copy_to_user(off_out, &offset, sizeof(loff_t)))
- ret = -EFAULT;
+ else
+ *off_out = offset;
return ret;
}
@@ -1075,8 +1073,7 @@ long do_splice(struct file *in, loff_t __user *off_in,
if (off_in) {
if (!(in->f_mode & FMODE_PREAD))
return -EINVAL;
- if (copy_from_user(&offset, off_in, sizeof(loff_t)))
- return -EFAULT;
+ offset = *off_in;
} else {
offset = in->f_pos;
}
@@ -1100,8 +1097,8 @@ long do_splice(struct file *in, loff_t __user *off_in,
wakeup_pipe_readers(opipe);
if (!off_in)
in->f_pos = offset;
- else if (copy_to_user(off_in, &offset, sizeof(loff_t)))
- ret = -EFAULT;
+ else
+ *off_in = offset;
return ret;
}
@@ -1109,6 +1106,46 @@ long do_splice(struct file *in, loff_t __user *off_in,
return -EINVAL;
}
+static long __do_splice(struct file *in, loff_t __user *off_in,
+ struct file *out, loff_t __user *off_out,
+ size_t len, unsigned int flags)
+{
+ struct pipe_inode_info *ipipe;
+ struct pipe_inode_info *opipe;
+ loff_t offset, *__off_in = NULL, *__off_out = NULL;
+ long ret;
+
+ ipipe = get_pipe_info(in, true);
+ opipe = get_pipe_info(out, true);
+
+ if (ipipe && off_in)
+ return -ESPIPE;
+ if (opipe && off_out)
+ return -ESPIPE;
+
+ if (off_out) {
+ if (copy_from_user(&offset, off_out, sizeof(loff_t)))
+ return -EFAULT;
+ __off_out = &offset;
+ }
+ if (off_in) {
+ if (copy_from_user(&offset, off_in, sizeof(loff_t)))
+ return -EFAULT;
+ __off_in = &offset;
+ }
+
+ ret = do_splice(in, __off_in, out, __off_out, len, flags);
+ if (ret < 0)
+ return ret;
+
+ if (__off_out && copy_to_user(off_out, __off_out, sizeof(loff_t)))
+ return -EFAULT;
+ if (__off_in && copy_to_user(off_in, __off_in, sizeof(loff_t)))
+ return -EFAULT;
+
+ return ret;
+}
+
static int iter_to_pipe(struct iov_iter *from,
struct pipe_inode_info *pipe,
unsigned flags)
@@ -1303,8 +1340,8 @@ SYSCALL_DEFINE6(splice, int, fd_in, loff_t __user *, off_in,
if (in.file) {
out = fdget(fd_out);
if (out.file) {
- error = do_splice(in.file, off_in, out.file, off_out,
- len, flags);
+ error = __do_splice(in.file, off_in, out.file, off_out,
+ len, flags);
fdput(out);
}
fdput(in);
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index 0cc4cee..d6c6593 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -380,8 +380,7 @@ static int squashfs_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_files = msblk->inodes;
buf->f_ffree = 0;
buf->f_namelen = SQUASHFS_NAME_LEN;
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
return 0;
}
diff --git a/fs/stat.c b/fs/stat.c
index 44f8ad3..dacecdd 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -56,7 +56,7 @@ EXPORT_SYMBOL(generic_fillattr);
* @path: file to get attributes from
* @stat: structure to return attributes in
* @request_mask: STATX_xxx flags indicating what the caller wants
- * @query_flags: Query mode (KSTAT_QUERY_FLAGS)
+ * @query_flags: Query mode (AT_STATX_SYNC_TYPE)
*
* Get attributes without calling security_inode_getattr.
*
@@ -71,7 +71,7 @@ int vfs_getattr_nosec(const struct path *path, struct kstat *stat,
memset(stat, 0, sizeof(*stat));
stat->result_mask |= STATX_BASIC_STATS;
- query_flags &= KSTAT_QUERY_FLAGS;
+ query_flags &= AT_STATX_SYNC_TYPE;
/* allow the fs to override these if it really wants to */
/* SB_NOATIME means filesystem supplies dummy atime value */
@@ -97,7 +97,7 @@ EXPORT_SYMBOL(vfs_getattr_nosec);
* @path: The file of interest
* @stat: Where to return the statistics
* @request_mask: STATX_xxx flags indicating what the caller wants
- * @query_flags: Query mode (KSTAT_QUERY_FLAGS)
+ * @query_flags: Query mode (AT_STATX_SYNC_TYPE)
*
* Ask the filesystem for a file's attributes. The caller must indicate in
* request_mask and query_flags to indicate what they want.
@@ -126,53 +126,27 @@ int vfs_getattr(const struct path *path, struct kstat *stat,
EXPORT_SYMBOL(vfs_getattr);
/**
- * vfs_statx_fd - Get the enhanced basic attributes by file descriptor
+ * vfs_fstat - Get the basic attributes by file descriptor
* @fd: The file descriptor referring to the file of interest
* @stat: The result structure to fill in.
- * @request_mask: STATX_xxx flags indicating what the caller wants
- * @query_flags: Query mode (KSTAT_QUERY_FLAGS)
*
* This function is a wrapper around vfs_getattr(). The main difference is
* that it uses a file descriptor to determine the file location.
*
* 0 will be returned on success, and a -ve error code if unsuccessful.
*/
-int vfs_statx_fd(unsigned int fd, struct kstat *stat,
- u32 request_mask, unsigned int query_flags)
+int vfs_fstat(int fd, struct kstat *stat)
{
struct fd f;
- int error = -EBADF;
-
- if (query_flags & ~KSTAT_QUERY_FLAGS)
- return -EINVAL;
+ int error;
f = fdget_raw(fd);
- if (f.file) {
- error = vfs_getattr(&f.file->f_path, stat,
- request_mask, query_flags);
- fdput(f);
- }
+ if (!f.file)
+ return -EBADF;
+ error = vfs_getattr(&f.file->f_path, stat, STATX_BASIC_STATS, 0);
+ fdput(f);
return error;
}
-EXPORT_SYMBOL(vfs_statx_fd);
-
-static inline unsigned vfs_stat_set_lookup_flags(unsigned *lookup_flags,
- int flags)
-{
- if ((flags & ~(AT_SYMLINK_NOFOLLOW | AT_NO_AUTOMOUNT |
- AT_EMPTY_PATH | KSTAT_QUERY_FLAGS)) != 0)
- return -EINVAL;
-
- *lookup_flags = LOOKUP_FOLLOW | LOOKUP_AUTOMOUNT;
- if (flags & AT_SYMLINK_NOFOLLOW)
- *lookup_flags &= ~LOOKUP_FOLLOW;
- if (flags & AT_NO_AUTOMOUNT)
- *lookup_flags &= ~LOOKUP_AUTOMOUNT;
- if (flags & AT_EMPTY_PATH)
- *lookup_flags |= LOOKUP_EMPTY;
-
- return 0;
-}
/**
* vfs_statx - Get basic and extra attributes by filename
@@ -189,15 +163,24 @@ static inline unsigned vfs_stat_set_lookup_flags(unsigned *lookup_flags,
*
* 0 will be returned on success, and a -ve error code if unsuccessful.
*/
-int vfs_statx(int dfd, const char __user *filename, int flags,
+static int vfs_statx(int dfd, const char __user *filename, int flags,
struct kstat *stat, u32 request_mask)
{
struct path path;
- int error = -EINVAL;
- unsigned lookup_flags;
+ unsigned lookup_flags = 0;
+ int error;
- if (vfs_stat_set_lookup_flags(&lookup_flags, flags))
+ if (flags & ~(AT_SYMLINK_NOFOLLOW | AT_NO_AUTOMOUNT | AT_EMPTY_PATH |
+ AT_STATX_SYNC_TYPE))
return -EINVAL;
+
+ if (!(flags & AT_SYMLINK_NOFOLLOW))
+ lookup_flags |= LOOKUP_FOLLOW;
+ if (!(flags & AT_NO_AUTOMOUNT))
+ lookup_flags |= LOOKUP_AUTOMOUNT;
+ if (flags & AT_EMPTY_PATH)
+ lookup_flags |= LOOKUP_EMPTY;
+
retry:
error = user_path_at(dfd, filename, lookup_flags, &path);
if (error)
@@ -217,8 +200,13 @@ int vfs_statx(int dfd, const char __user *filename, int flags,
out:
return error;
}
-EXPORT_SYMBOL(vfs_statx);
+int vfs_fstatat(int dfd, const char __user *filename,
+ struct kstat *stat, int flags)
+{
+ return vfs_statx(dfd, filename, flags | AT_NO_AUTOMOUNT,
+ stat, STATX_BASIC_STATS);
+}
#ifdef __ARCH_WANT_OLD_STAT
diff --git a/fs/statfs.c b/fs/statfs.c
index 2616424..59f3375 100644
--- a/fs/statfs.c
+++ b/fs/statfs.c
@@ -29,6 +29,8 @@ static int flags_by_mnt(int mnt_flags)
flags |= ST_NODIRATIME;
if (mnt_flags & MNT_RELATIME)
flags |= ST_RELATIME;
+ if (mnt_flags & MNT_NOSYMFOLLOW)
+ flags |= ST_NOSYMFOLLOW;
return flags;
}
diff --git a/fs/sysv/inode.c b/fs/sysv/inode.c
index 02b1d9d0..be47263 100644
--- a/fs/sysv/inode.c
+++ b/fs/sysv/inode.c
@@ -98,8 +98,7 @@ static int sysv_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_files = sbi->s_ninodes;
buf->f_ffree = sysv_count_free_inodes(sb);
buf->f_namelen = SYSV_NAMELEN;
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
return 0;
}
diff --git a/fs/udf/super.c b/fs/udf/super.c
index faf2017..5bef3a6 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -2414,8 +2414,7 @@ static int udf_statfs(struct dentry *dentry, struct kstatfs *buf)
+ buf->f_bfree;
buf->f_ffree = buf->f_bfree;
buf->f_namelen = UDF_NAME_LEN;
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
return 0;
}
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index e3b69fb..983558b 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -1431,8 +1431,7 @@ static int ufs_statfs(struct dentry *dentry, struct kstatfs *buf)
? (buf->f_bfree - uspi->s_root_blocks) : 0;
buf->f_files = uspi->s_ncg * uspi->s_ipg;
buf->f_namelen = UFS_MAXNAMLEN;
- buf->f_fsid.val[0] = (u32)id;
- buf->f_fsid.val[1] = (u32)(id >> 32);
+ buf->f_fsid = u64_to_fsid(id);
mutex_unlock(&UFS_SB(sb)->s_lock);
diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c
index f2a8a0e..7371a7f 100644
--- a/fs/xfs/xfs_bmap_util.c
+++ b/fs/xfs/xfs_bmap_util.c
@@ -947,11 +947,11 @@ xfs_free_file_space(
endoffset_fsb = XFS_B_TO_FSBT(mp, offset + len);
/* We can only free complete realtime extents. */
- if (XFS_IS_REALTIME_INODE(ip)) {
- xfs_extlen_t extsz = xfs_get_extsz_hint(ip);
-
- if ((startoffset_fsb | endoffset_fsb) & (extsz - 1))
- return -EINVAL;
+ if (XFS_IS_REALTIME_INODE(ip) && mp->m_sb.sb_rextsize > 1) {
+ startoffset_fsb = roundup_64(startoffset_fsb,
+ mp->m_sb.sb_rextsize);
+ endoffset_fsb = rounddown_64(endoffset_fsb,
+ mp->m_sb.sb_rextsize);
}
/*
@@ -1147,14 +1147,6 @@ xfs_insert_file_space(
trace_xfs_insert_file_space(ip);
- /* We can only insert complete realtime extents. */
- if (XFS_IS_REALTIME_INODE(ip)) {
- xfs_extlen_t extsz = xfs_get_extsz_hint(ip);
-
- if ((stop_fsb | shift_fsb) & (extsz - 1))
- return -EINVAL;
- }
-
error = xfs_bmap_can_insert_extents(ip, stop_fsb, shift_fsb);
if (error)
return error;
diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c
index 3d1b951..5b0f93f 100644
--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -32,6 +32,39 @@
static const struct vm_operations_struct xfs_file_vm_ops;
+/*
+ * Decide if the given file range is aligned to the size of the fundamental
+ * allocation unit for the file.
+ */
+static bool
+xfs_is_falloc_aligned(
+ struct xfs_inode *ip,
+ loff_t pos,
+ long long int len)
+{
+ struct xfs_mount *mp = ip->i_mount;
+ uint64_t mask;
+
+ if (XFS_IS_REALTIME_INODE(ip)) {
+ if (!is_power_of_2(mp->m_sb.sb_rextsize)) {
+ u64 rextbytes;
+ u32 mod;
+
+ rextbytes = XFS_FSB_TO_B(mp, mp->m_sb.sb_rextsize);
+ div_u64_rem(pos, rextbytes, &mod);
+ if (mod)
+ return false;
+ div_u64_rem(len, rextbytes, &mod);
+ return mod == 0;
+ }
+ mask = XFS_FSB_TO_B(mp, mp->m_sb.sb_rextsize) - 1;
+ } else {
+ mask = mp->m_sb.sb_blocksize - 1;
+ }
+
+ return !((pos | len) & mask);
+}
+
int
xfs_update_prealloc_flags(
struct xfs_inode *ip,
@@ -850,9 +883,7 @@ xfs_file_fallocate(
if (error)
goto out_unlock;
} else if (mode & FALLOC_FL_COLLAPSE_RANGE) {
- unsigned int blksize_mask = i_blocksize(inode) - 1;
-
- if (offset & blksize_mask || len & blksize_mask) {
+ if (!xfs_is_falloc_aligned(ip, offset, len)) {
error = -EINVAL;
goto out_unlock;
}
@@ -872,10 +903,9 @@ xfs_file_fallocate(
if (error)
goto out_unlock;
} else if (mode & FALLOC_FL_INSERT_RANGE) {
- unsigned int blksize_mask = i_blocksize(inode) - 1;
loff_t isize = i_size_read(inode);
- if (offset & blksize_mask || len & blksize_mask) {
+ if (!xfs_is_falloc_aligned(ip, offset, len)) {
error = -EINVAL;
goto out_unlock;
}
diff --git a/fs/xfs/xfs_linux.h b/fs/xfs/xfs_linux.h
index ad10097..5b7a1e2 100644
--- a/fs/xfs/xfs_linux.h
+++ b/fs/xfs/xfs_linux.h
@@ -175,6 +175,12 @@ static inline xfs_dev_t linux_to_xfs_dev_t(dev_t dev)
#define xfs_sort(a,n,s,fn) sort(a,n,s,fn,NULL)
#define xfs_stack_trace() dump_stack()
+static inline uint64_t rounddown_64(uint64_t x, uint32_t y)
+{
+ do_div(x, y);
+ return x * y;
+}
+
static inline uint64_t roundup_64(uint64_t x, uint32_t y)
{
x += y - 1;
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index a8289ad..87886b7 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -3446,6 +3446,14 @@ xlog_recover_finish(
int error;
error = xlog_recover_process_intents(log);
if (error) {
+ /*
+ * Cancel all the unprocessed intent items now so that
+ * we don't leave them pinned in the AIL. This can
+ * cause the AIL to livelock on the pinned item if
+ * anyone tries to push the AIL (inode reclaim does
+ * this) before we get around to xfs_log_mount_cancel.
+ */
+ xlog_recover_cancel_intents(log);
xfs_alert(log->l_mp, "Failed to recover intents");
return error;
}
diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
index d1b5f2d..e3e229e 100644
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -794,8 +794,7 @@ xfs_fs_statfs(
statp->f_namelen = MAXNAMELEN - 1;
id = huge_encode_dev(mp->m_ddev_targp->bt_dev);
- statp->f_fsid.val[0] = (u32)id;
- statp->f_fsid.val[1] = (u32)(id >> 32);
+ statp->f_fsid = u64_to_fsid(id);
icount = percpu_counter_sum(&mp->m_icount);
ifree = percpu_counter_sum(&mp->m_ifree);
diff --git a/fs/zonefs/super.c b/fs/zonefs/super.c
index 64cc2a9..ff5930b 100644
--- a/fs/zonefs/super.c
+++ b/fs/zonefs/super.c
@@ -1116,8 +1116,7 @@ static int zonefs_statfs(struct dentry *dentry, struct kstatfs *buf)
fsid = le64_to_cpup((void *)sbi->s_uuid.b) ^
le64_to_cpup((void *)sbi->s_uuid.b + sizeof(u64));
- buf->f_fsid.val[0] = (u32)fsid;
- buf->f_fsid.val[1] = (u32)(fsid >> 32);
+ buf->f_fsid = u64_to_fsid(fsid);
return 0;
}
diff --git a/include/asm-generic/uaccess.h b/include/asm-generic/uaccess.h
index ba68ee4..45f9872 100644
--- a/include/asm-generic/uaccess.h
+++ b/include/asm-generic/uaccess.h
@@ -10,28 +10,76 @@
#include <linux/string.h>
#ifdef CONFIG_UACCESS_MEMCPY
+#include <asm/unaligned.h>
+
+static inline int __get_user_fn(size_t size, const void __user *from, void *to)
+{
+ BUILD_BUG_ON(!__builtin_constant_p(size));
+
+ switch (size) {
+ case 1:
+ *(u8 *)to = get_unaligned((u8 __force *)from);
+ return 0;
+ case 2:
+ *(u16 *)to = get_unaligned((u16 __force *)from);
+ return 0;
+ case 4:
+ *(u32 *)to = get_unaligned((u32 __force *)from);
+ return 0;
+ case 8:
+ *(u64 *)to = get_unaligned((u64 __force *)from);
+ return 0;
+ default:
+ BUILD_BUG();
+ return 0;
+ }
+
+}
+#define __get_user_fn(sz, u, k) __get_user_fn(sz, u, k)
+
+static inline int __put_user_fn(size_t size, void __user *to, void *from)
+{
+ BUILD_BUG_ON(!__builtin_constant_p(size));
+
+ switch (size) {
+ case 1:
+ put_unaligned(*(u8 *)from, (u8 __force *)to);
+ return 0;
+ case 2:
+ put_unaligned(*(u16 *)from, (u16 __force *)to);
+ return 0;
+ case 4:
+ put_unaligned(*(u32 *)from, (u32 __force *)to);
+ return 0;
+ case 8:
+ put_unaligned(*(u64 *)from, (u64 __force *)to);
+ return 0;
+ default:
+ BUILD_BUG();
+ return 0;
+ }
+}
+#define __put_user_fn(sz, u, k) __put_user_fn(sz, u, k)
+
+#define __get_kernel_nofault(dst, src, type, err_label) \
+do { \
+ *((type *)dst) = get_unaligned((type *)(src)); \
+ if (0) /* make sure the label looks used to the compiler */ \
+ goto err_label; \
+} while (0)
+
+#define __put_kernel_nofault(dst, src, type, err_label) \
+do { \
+ put_unaligned(*((type *)src), (type *)(dst)); \
+ if (0) /* make sure the label looks used to the compiler */ \
+ goto err_label; \
+} while (0)
+
+#define HAVE_GET_KERNEL_NOFAULT 1
+
static inline __must_check unsigned long
raw_copy_from_user(void *to, const void __user * from, unsigned long n)
{
- if (__builtin_constant_p(n)) {
- switch(n) {
- case 1:
- *(u8 *)to = *(u8 __force *)from;
- return 0;
- case 2:
- *(u16 *)to = *(u16 __force *)from;
- return 0;
- case 4:
- *(u32 *)to = *(u32 __force *)from;
- return 0;
-#ifdef CONFIG_64BIT
- case 8:
- *(u64 *)to = *(u64 __force *)from;
- return 0;
-#endif
- }
- }
-
memcpy(to, (const void __force *)from, n);
return 0;
}
@@ -39,27 +87,6 @@ raw_copy_from_user(void *to, const void __user * from, unsigned long n)
static inline __must_check unsigned long
raw_copy_to_user(void __user *to, const void *from, unsigned long n)
{
- if (__builtin_constant_p(n)) {
- switch(n) {
- case 1:
- *(u8 __force *)to = *(u8 *)from;
- return 0;
- case 2:
- *(u16 __force *)to = *(u16 *)from;
- return 0;
- case 4:
- *(u32 __force *)to = *(u32 *)from;
- return 0;
-#ifdef CONFIG_64BIT
- case 8:
- *(u64 __force *)to = *(u64 *)from;
- return 0;
-#endif
- default:
- break;
- }
- }
-
memcpy((void __force *)to, from, n);
return 0;
}
@@ -67,6 +94,7 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long n)
#define INLINE_COPY_TO_USER
#endif /* CONFIG_UACCESS_MEMCPY */
+#ifdef CONFIG_SET_FS
#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
#ifndef KERNEL_DS
@@ -89,6 +117,7 @@ static inline void set_fs(mm_segment_t fs)
#ifndef uaccess_kernel
#define uaccess_kernel() (get_fs().seg == KERNEL_DS.seg)
#endif
+#endif /* CONFIG_SET_FS */
#define access_ok(addr, size) __access_ok((unsigned long)(addr),(size))
diff --git a/include/dt-bindings/clock/tegra234-clock.h b/include/dt-bindings/clock/tegra234-clock.h
new file mode 100644
index 0000000..2c82072
--- /dev/null
+++ b/include/dt-bindings/clock/tegra234-clock.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018-2019, NVIDIA CORPORATION. All rights reserved. */
+
+#ifndef DT_BINDINGS_CLOCK_TEGRA234_CLOCK_H
+#define DT_BINDINGS_CLOCK_TEGRA234_CLOCK_H
+
+/** @brief output of gate CLK_ENB_FUSE */
+#define TEGRA234_CLK_FUSE 40
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC4 */
+#define TEGRA234_CLK_SDMMC4 123
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTA */
+#define TEGRA234_CLK_UARTA 155
+
+#endif
diff --git a/include/dt-bindings/mux/mux-j721e-wiz.h b/include/dt-bindings/mux/mux-j721e-wiz.h
deleted file mode 100644
index fd1c4ea..0000000
--- a/include/dt-bindings/mux/mux-j721e-wiz.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This header provides constants for J721E WIZ.
- */
-
-#ifndef _DT_BINDINGS_J721E_WIZ
-#define _DT_BINDINGS_J721E_WIZ
-
-#define SERDES0_LANE0_QSGMII_LANE1 0x0
-#define SERDES0_LANE0_PCIE0_LANE0 0x1
-#define SERDES0_LANE0_USB3_0_SWAP 0x2
-
-#define SERDES0_LANE1_QSGMII_LANE2 0x0
-#define SERDES0_LANE1_PCIE0_LANE1 0x1
-#define SERDES0_LANE1_USB3_0 0x2
-
-#define SERDES1_LANE0_QSGMII_LANE3 0x0
-#define SERDES1_LANE0_PCIE1_LANE0 0x1
-#define SERDES1_LANE0_USB3_1_SWAP 0x2
-#define SERDES1_LANE0_SGMII_LANE0 0x3
-
-#define SERDES1_LANE1_QSGMII_LANE4 0x0
-#define SERDES1_LANE1_PCIE1_LANE1 0x1
-#define SERDES1_LANE1_USB3_1 0x2
-#define SERDES1_LANE1_SGMII_LANE1 0x3
-
-#define SERDES2_LANE0_PCIE2_LANE0 0x1
-#define SERDES2_LANE0_SGMII_LANE0 0x3
-#define SERDES2_LANE0_USB3_1_SWAP 0x2
-
-#define SERDES2_LANE1_PCIE2_LANE1 0x1
-#define SERDES2_LANE1_USB3_1 0x2
-#define SERDES2_LANE1_SGMII_LANE1 0x3
-
-#define SERDES3_LANE0_PCIE3_LANE0 0x1
-#define SERDES3_LANE0_USB3_0_SWAP 0x2
-
-#define SERDES3_LANE1_PCIE3_LANE1 0x1
-#define SERDES3_LANE1_USB3_0 0x2
-
-#define SERDES4_LANE0_EDP_LANE0 0x0
-#define SERDES4_LANE0_QSGMII_LANE5 0x2
-
-#define SERDES4_LANE1_EDP_LANE1 0x0
-#define SERDES4_LANE1_QSGMII_LANE6 0x2
-
-#define SERDES4_LANE2_EDP_LANE2 0x0
-#define SERDES4_LANE2_QSGMII_LANE7 0x2
-
-#define SERDES4_LANE3_EDP_LANE3 0x0
-#define SERDES4_LANE3_QSGMII_LANE8 0x2
-
-#endif /* _DT_BINDINGS_J721E_WIZ */
diff --git a/include/dt-bindings/mux/ti-serdes.h b/include/dt-bindings/mux/ti-serdes.h
new file mode 100644
index 0000000..9047ec6
--- /dev/null
+++ b/include/dt-bindings/mux/ti-serdes.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides constants for SERDES MUX for TI SoCs
+ */
+
+#ifndef _DT_BINDINGS_MUX_TI_SERDES
+#define _DT_BINDINGS_MUX_TI_SERDES
+
+/* J721E */
+
+#define J721E_SERDES0_LANE0_QSGMII_LANE1 0x0
+#define J721E_SERDES0_LANE0_PCIE0_LANE0 0x1
+#define J721E_SERDES0_LANE0_USB3_0_SWAP 0x2
+#define J721E_SERDES0_LANE0_IP4_UNUSED 0x3
+
+#define J721E_SERDES0_LANE1_QSGMII_LANE2 0x0
+#define J721E_SERDES0_LANE1_PCIE0_LANE1 0x1
+#define J721E_SERDES0_LANE1_USB3_0 0x2
+#define J721E_SERDES0_LANE1_IP4_UNUSED 0x3
+
+#define J721E_SERDES1_LANE0_QSGMII_LANE3 0x0
+#define J721E_SERDES1_LANE0_PCIE1_LANE0 0x1
+#define J721E_SERDES1_LANE0_USB3_1_SWAP 0x2
+#define J721E_SERDES1_LANE0_SGMII_LANE0 0x3
+
+#define J721E_SERDES1_LANE1_QSGMII_LANE4 0x0
+#define J721E_SERDES1_LANE1_PCIE1_LANE1 0x1
+#define J721E_SERDES1_LANE1_USB3_1 0x2
+#define J721E_SERDES1_LANE1_SGMII_LANE1 0x3
+
+#define J721E_SERDES2_LANE0_IP1_UNUSED 0x0
+#define J721E_SERDES2_LANE0_PCIE2_LANE0 0x1
+#define J721E_SERDES2_LANE0_USB3_1_SWAP 0x2
+#define J721E_SERDES2_LANE0_SGMII_LANE0 0x3
+
+#define J721E_SERDES2_LANE1_IP1_UNUSED 0x0
+#define J721E_SERDES2_LANE1_PCIE2_LANE1 0x1
+#define J721E_SERDES2_LANE1_USB3_1 0x2
+#define J721E_SERDES2_LANE1_SGMII_LANE1 0x3
+
+#define J721E_SERDES3_LANE0_IP1_UNUSED 0x0
+#define J721E_SERDES3_LANE0_PCIE3_LANE0 0x1
+#define J721E_SERDES3_LANE0_USB3_0_SWAP 0x2
+#define J721E_SERDES3_LANE0_IP4_UNUSED 0x3
+
+#define J721E_SERDES3_LANE1_IP1_UNUSED 0x0
+#define J721E_SERDES3_LANE1_PCIE3_LANE1 0x1
+#define J721E_SERDES3_LANE1_USB3_0 0x2
+#define J721E_SERDES3_LANE1_IP4_UNUSED 0x3
+
+#define J721E_SERDES4_LANE0_EDP_LANE0 0x0
+#define J721E_SERDES4_LANE0_IP2_UNUSED 0x1
+#define J721E_SERDES4_LANE0_QSGMII_LANE5 0x2
+#define J721E_SERDES4_LANE0_IP4_UNUSED 0x3
+
+#define J721E_SERDES4_LANE1_EDP_LANE1 0x0
+#define J721E_SERDES4_LANE1_IP2_UNUSED 0x1
+#define J721E_SERDES4_LANE1_QSGMII_LANE6 0x2
+#define J721E_SERDES4_LANE1_IP4_UNUSED 0x3
+
+#define J721E_SERDES4_LANE2_EDP_LANE2 0x0
+#define J721E_SERDES4_LANE2_IP2_UNUSED 0x1
+#define J721E_SERDES4_LANE2_QSGMII_LANE7 0x2
+#define J721E_SERDES4_LANE2_IP4_UNUSED 0x3
+
+#define J721E_SERDES4_LANE3_EDP_LANE3 0x0
+#define J721E_SERDES4_LANE3_IP2_UNUSED 0x1
+#define J721E_SERDES4_LANE3_QSGMII_LANE8 0x2
+#define J721E_SERDES4_LANE3_IP4_UNUSED 0x3
+
+/* J7200 */
+
+#define J7200_SERDES0_LANE0_QSGMII_LANE3 0x0
+#define J7200_SERDES0_LANE0_PCIE1_LANE0 0x1
+#define J7200_SERDES0_LANE0_IP3_UNUSED 0x2
+#define J7200_SERDES0_LANE0_IP4_UNUSED 0x3
+
+#define J7200_SERDES0_LANE1_QSGMII_LANE4 0x0
+#define J7200_SERDES0_LANE1_PCIE1_LANE1 0x1
+#define J7200_SERDES0_LANE1_IP3_UNUSED 0x2
+#define J7200_SERDES0_LANE1_IP4_UNUSED 0x3
+
+#define J7200_SERDES0_LANE2_QSGMII_LANE1 0x0
+#define J7200_SERDES0_LANE2_PCIE1_LANE2 0x1
+#define J7200_SERDES0_LANE2_IP3_UNUSED 0x2
+#define J7200_SERDES0_LANE2_IP4_UNUSED 0x3
+
+#define J7200_SERDES0_LANE3_QSGMII_LANE2 0x0
+#define J7200_SERDES0_LANE3_PCIE1_LANE3 0x1
+#define J7200_SERDES0_LANE3_USB 0x2
+#define J7200_SERDES0_LANE3_IP4_UNUSED 0x3
+
+#endif /* _DT_BINDINGS_MUX_TI_SERDES */
diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
index 2d2a8c7..f48245f 100644
--- a/include/dt-bindings/pinctrl/omap.h
+++ b/include/dt-bindings/pinctrl/omap.h
@@ -64,7 +64,7 @@
#define OMAP3_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2a00) (val)
#define DM814X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
#define DM816X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
-#define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
+#define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) (0)
#define AM33XX_PADCONF(pa, conf, mux) OMAP_IOPAD_OFFSET((pa), 0x0800) (conf) (mux)
/*
diff --git a/include/dt-bindings/power/meson-axg-power.h b/include/dt-bindings/power/meson-axg-power.h
new file mode 100644
index 0000000..e524388
--- /dev/null
+++ b/include/dt-bindings/power/meson-axg-power.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2020 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#ifndef _DT_BINDINGS_MESON_AXG_POWER_H
+#define _DT_BINDINGS_MESON_AXG_POWER_H
+
+#define PWRC_AXG_VPU_ID 0
+#define PWRC_AXG_ETHERNET_MEM_ID 1
+#define PWRC_AXG_AUDIO_ID 2
+
+#endif
diff --git a/include/dt-bindings/reset/imx8mq-reset.h b/include/dt-bindings/reset/imx8mq-reset.h
index a5b5707..7058706 100644
--- a/include/dt-bindings/reset/imx8mq-reset.h
+++ b/include/dt-bindings/reset/imx8mq-reset.h
@@ -58,7 +58,10 @@
#define IMX8MQ_RESET_DDRC2_PRST 47 /* i.MX8MM/i.MX8MN does NOT support */
#define IMX8MQ_RESET_DDRC2_CORE_RESET 48 /* i.MX8MM/i.MX8MN does NOT support */
#define IMX8MQ_RESET_DDRC2_PHY_RESET 49 /* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_SW_M4C_RST 50
+#define IMX8MQ_RESET_SW_M4P_RST 51
+#define IMX8MQ_RESET_M4_ENABLE 52
-#define IMX8MQ_RESET_NUM 50
+#define IMX8MQ_RESET_NUM 53
#endif
diff --git a/include/dt-bindings/reset/tegra234-reset.h b/include/dt-bindings/reset/tegra234-reset.h
new file mode 100644
index 0000000..b3c63be
--- /dev/null
+++ b/include/dt-bindings/reset/tegra234-reset.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018-2020, NVIDIA CORPORATION. All rights reserved. */
+
+#ifndef DT_BINDINGS_RESET_TEGRA234_RESET_H
+#define DT_BINDINGS_RESET_TEGRA234_RESET_H
+
+#define TEGRA234_RESET_SDMMC4 85
+#define TEGRA234_RESET_UARTA 100
+
+#endif
diff --git a/include/dt-bindings/reset/xlnx-versal-resets.h b/include/dt-bindings/reset/xlnx-versal-resets.h
new file mode 100644
index 0000000..895424e
--- /dev/null
+++ b/include/dt-bindings/reset/xlnx-versal-resets.h
@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Xilinx, Inc.
+ */
+
+#ifndef _DT_BINDINGS_VERSAL_RESETS_H
+#define _DT_BINDINGS_VERSAL_RESETS_H
+
+#define VERSAL_RST_PMC_POR (0xc30c001U)
+#define VERSAL_RST_PMC (0xc410002U)
+#define VERSAL_RST_PS_POR (0xc30c003U)
+#define VERSAL_RST_PL_POR (0xc30c004U)
+#define VERSAL_RST_NOC_POR (0xc30c005U)
+#define VERSAL_RST_FPD_POR (0xc30c006U)
+#define VERSAL_RST_ACPU_0_POR (0xc30c007U)
+#define VERSAL_RST_ACPU_1_POR (0xc30c008U)
+#define VERSAL_RST_OCM2_POR (0xc30c009U)
+#define VERSAL_RST_PS_SRST (0xc41000aU)
+#define VERSAL_RST_PL_SRST (0xc41000bU)
+#define VERSAL_RST_NOC (0xc41000cU)
+#define VERSAL_RST_NPI (0xc41000dU)
+#define VERSAL_RST_SYS_RST_1 (0xc41000eU)
+#define VERSAL_RST_SYS_RST_2 (0xc41000fU)
+#define VERSAL_RST_SYS_RST_3 (0xc410010U)
+#define VERSAL_RST_FPD (0xc410011U)
+#define VERSAL_RST_PL0 (0xc410012U)
+#define VERSAL_RST_PL1 (0xc410013U)
+#define VERSAL_RST_PL2 (0xc410014U)
+#define VERSAL_RST_PL3 (0xc410015U)
+#define VERSAL_RST_APU (0xc410016U)
+#define VERSAL_RST_ACPU_0 (0xc410017U)
+#define VERSAL_RST_ACPU_1 (0xc410018U)
+#define VERSAL_RST_ACPU_L2 (0xc410019U)
+#define VERSAL_RST_ACPU_GIC (0xc41001aU)
+#define VERSAL_RST_RPU_ISLAND (0xc41001bU)
+#define VERSAL_RST_RPU_AMBA (0xc41001cU)
+#define VERSAL_RST_R5_0 (0xc41001dU)
+#define VERSAL_RST_R5_1 (0xc41001eU)
+#define VERSAL_RST_SYSMON_PMC_SEQ_RST (0xc41001fU)
+#define VERSAL_RST_SYSMON_PMC_CFG_RST (0xc410020U)
+#define VERSAL_RST_SYSMON_FPD_CFG_RST (0xc410021U)
+#define VERSAL_RST_SYSMON_FPD_SEQ_RST (0xc410022U)
+#define VERSAL_RST_SYSMON_LPD (0xc410023U)
+#define VERSAL_RST_PDMA_RST1 (0xc410024U)
+#define VERSAL_RST_PDMA_RST0 (0xc410025U)
+#define VERSAL_RST_ADMA (0xc410026U)
+#define VERSAL_RST_TIMESTAMP (0xc410027U)
+#define VERSAL_RST_OCM (0xc410028U)
+#define VERSAL_RST_OCM2_RST (0xc410029U)
+#define VERSAL_RST_IPI (0xc41002aU)
+#define VERSAL_RST_SBI (0xc41002bU)
+#define VERSAL_RST_LPD (0xc41002cU)
+#define VERSAL_RST_QSPI (0xc10402dU)
+#define VERSAL_RST_OSPI (0xc10402eU)
+#define VERSAL_RST_SDIO_0 (0xc10402fU)
+#define VERSAL_RST_SDIO_1 (0xc104030U)
+#define VERSAL_RST_I2C_PMC (0xc104031U)
+#define VERSAL_RST_GPIO_PMC (0xc104032U)
+#define VERSAL_RST_GEM_0 (0xc104033U)
+#define VERSAL_RST_GEM_1 (0xc104034U)
+#define VERSAL_RST_SPARE (0xc104035U)
+#define VERSAL_RST_USB_0 (0xc104036U)
+#define VERSAL_RST_UART_0 (0xc104037U)
+#define VERSAL_RST_UART_1 (0xc104038U)
+#define VERSAL_RST_SPI_0 (0xc104039U)
+#define VERSAL_RST_SPI_1 (0xc10403aU)
+#define VERSAL_RST_CAN_FD_0 (0xc10403bU)
+#define VERSAL_RST_CAN_FD_1 (0xc10403cU)
+#define VERSAL_RST_I2C_0 (0xc10403dU)
+#define VERSAL_RST_I2C_1 (0xc10403eU)
+#define VERSAL_RST_GPIO_LPD (0xc10403fU)
+#define VERSAL_RST_TTC_0 (0xc104040U)
+#define VERSAL_RST_TTC_1 (0xc104041U)
+#define VERSAL_RST_TTC_2 (0xc104042U)
+#define VERSAL_RST_TTC_3 (0xc104043U)
+#define VERSAL_RST_SWDT_FPD (0xc104044U)
+#define VERSAL_RST_SWDT_LPD (0xc104045U)
+#define VERSAL_RST_USB (0xc104046U)
+#define VERSAL_RST_DPC (0xc208047U)
+#define VERSAL_RST_PMCDBG (0xc208048U)
+#define VERSAL_RST_DBG_TRACE (0xc208049U)
+#define VERSAL_RST_DBG_FPD (0xc20804aU)
+#define VERSAL_RST_DBG_TSTMP (0xc20804bU)
+#define VERSAL_RST_RPU0_DBG (0xc20804cU)
+#define VERSAL_RST_RPU1_DBG (0xc20804dU)
+#define VERSAL_RST_HSDP (0xc20804eU)
+#define VERSAL_RST_DBG_LPD (0xc20804fU)
+#define VERSAL_RST_CPM_POR (0xc30c050U)
+#define VERSAL_RST_CPM (0xc410051U)
+#define VERSAL_RST_CPMDBG (0xc208052U)
+#define VERSAL_RST_PCIE_CFG (0xc410053U)
+#define VERSAL_RST_PCIE_CORE0 (0xc410054U)
+#define VERSAL_RST_PCIE_CORE1 (0xc410055U)
+#define VERSAL_RST_PCIE_DMA (0xc410056U)
+#define VERSAL_RST_CMN (0xc410057U)
+#define VERSAL_RST_L2_0 (0xc410058U)
+#define VERSAL_RST_L2_1 (0xc410059U)
+#define VERSAL_RST_ADDR_REMAP (0xc41005aU)
+#define VERSAL_RST_CPI0 (0xc41005bU)
+#define VERSAL_RST_CPI1 (0xc41005cU)
+#define VERSAL_RST_XRAM (0xc30c05dU)
+#define VERSAL_RST_AIE_ARRAY (0xc10405eU)
+#define VERSAL_RST_AIE_SHIM (0xc10405fU)
+
+#endif
diff --git a/include/dt-bindings/soc/bcm6318-pm.h b/include/dt-bindings/soc/bcm6318-pm.h
new file mode 100644
index 0000000..05931dc
--- /dev/null
+++ b/include/dt-bindings/soc/bcm6318-pm.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_BMIPS_BCM6318_PM_H
+#define __DT_BINDINGS_BMIPS_BCM6318_PM_H
+
+#define BCM6318_POWER_DOMAIN_PCIE 0
+#define BCM6318_POWER_DOMAIN_USB 1
+#define BCM6318_POWER_DOMAIN_EPHY0 2
+#define BCM6318_POWER_DOMAIN_EPHY1 3
+#define BCM6318_POWER_DOMAIN_EPHY2 4
+#define BCM6318_POWER_DOMAIN_EPHY3 5
+#define BCM6318_POWER_DOMAIN_LDO2P5 6
+#define BCM6318_POWER_DOMAIN_LDO2P9 7
+#define BCM6318_POWER_DOMAIN_SW1P0 8
+#define BCM6318_POWER_DOMAIN_PAD 9
+
+#endif /* __DT_BINDINGS_BMIPS_BCM6318_PM_H */
diff --git a/include/dt-bindings/soc/bcm63268-pm.h b/include/dt-bindings/soc/bcm63268-pm.h
new file mode 100644
index 0000000..84ded53
--- /dev/null
+++ b/include/dt-bindings/soc/bcm63268-pm.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_BMIPS_BCM63268_PM_H
+#define __DT_BINDINGS_BMIPS_BCM63268_PM_H
+
+#define BCM63268_POWER_DOMAIN_SAR 0
+#define BCM63268_POWER_DOMAIN_IPSEC 1
+#define BCM63268_POWER_DOMAIN_MIPS 2
+#define BCM63268_POWER_DOMAIN_DECT 3
+#define BCM63268_POWER_DOMAIN_USBH 4
+#define BCM63268_POWER_DOMAIN_USBD 5
+#define BCM63268_POWER_DOMAIN_ROBOSW 6
+#define BCM63268_POWER_DOMAIN_PCM 7
+#define BCM63268_POWER_DOMAIN_PERIPH 8
+#define BCM63268_POWER_DOMAIN_VDSL_PHY 9
+#define BCM63268_POWER_DOMAIN_VDSL_MIPS 10
+#define BCM63268_POWER_DOMAIN_FAP 11
+#define BCM63268_POWER_DOMAIN_PCIE 12
+#define BCM63268_POWER_DOMAIN_WLAN_PADS 13
+
+#endif /* __DT_BINDINGS_BMIPS_BCM63268_PM_H */
diff --git a/include/dt-bindings/soc/bcm6328-pm.h b/include/dt-bindings/soc/bcm6328-pm.h
new file mode 100644
index 0000000..557e1a6
--- /dev/null
+++ b/include/dt-bindings/soc/bcm6328-pm.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_BMIPS_BCM6328_PM_H
+#define __DT_BINDINGS_BMIPS_BCM6328_PM_H
+
+#define BCM6328_POWER_DOMAIN_ADSL2_MIPS 0
+#define BCM6328_POWER_DOMAIN_ADSL2_PHY 1
+#define BCM6328_POWER_DOMAIN_ADSL2_AFE 2
+#define BCM6328_POWER_DOMAIN_SAR 3
+#define BCM6328_POWER_DOMAIN_PCM 4
+#define BCM6328_POWER_DOMAIN_USBD 5
+#define BCM6328_POWER_DOMAIN_USBH 6
+#define BCM6328_POWER_DOMAIN_PCIE 7
+#define BCM6328_POWER_DOMAIN_ROBOSW 8
+#define BCM6328_POWER_DOMAIN_EPHY 9
+
+#endif /* __DT_BINDINGS_BMIPS_BCM6328_PM_H */
diff --git a/include/dt-bindings/soc/bcm6362-pm.h b/include/dt-bindings/soc/bcm6362-pm.h
new file mode 100644
index 0000000..d087ba6
--- /dev/null
+++ b/include/dt-bindings/soc/bcm6362-pm.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_BMIPS_BCM6362_PM_H
+#define __DT_BINDINGS_BMIPS_BCM6362_PM_H
+
+#define BCM6362_POWER_DOMAIN_SAR 0
+#define BCM6362_POWER_DOMAIN_IPSEC 1
+#define BCM6362_POWER_DOMAIN_MIPS 2
+#define BCM6362_POWER_DOMAIN_DECT 3
+#define BCM6362_POWER_DOMAIN_USBH 4
+#define BCM6362_POWER_DOMAIN_USBD 5
+#define BCM6362_POWER_DOMAIN_ROBOSW 6
+#define BCM6362_POWER_DOMAIN_PCM 7
+#define BCM6362_POWER_DOMAIN_PERIPH 8
+#define BCM6362_POWER_DOMAIN_ADSL_PHY 9
+#define BCM6362_POWER_DOMAIN_GMII_PADS 10
+#define BCM6362_POWER_DOMAIN_FAP 11
+#define BCM6362_POWER_DOMAIN_PCIE 12
+#define BCM6362_POWER_DOMAIN_WLAN_PADS 13
+
+#endif /* __DT_BINDINGS_BMIPS_BCM6362_PM_H */
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 7d7c132..d9b69bb 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -104,6 +104,24 @@ typedef u8 __bitwise blk_status_t;
*/
#define BLK_STS_ZONE_RESOURCE ((__force blk_status_t)14)
+/*
+ * BLK_STS_ZONE_OPEN_RESOURCE is returned from the driver in the completion
+ * path if the device returns a status indicating that too many zone resources
+ * are currently open. The same command should be successful if resubmitted
+ * after the number of open zones decreases below the device's limits, which is
+ * reported in the request_queue's max_open_zones.
+ */
+#define BLK_STS_ZONE_OPEN_RESOURCE ((__force blk_status_t)15)
+
+/*
+ * BLK_STS_ZONE_ACTIVE_RESOURCE is returned from the driver in the completion
+ * path if the device returns a status indicating that too many zone resources
+ * are currently active. The same command should be successful if resubmitted
+ * after the number of active zones decreases below the device's limits, which
+ * is reported in the request_queue's max_active_zones.
+ */
+#define BLK_STS_ZONE_ACTIVE_RESOURCE ((__force blk_status_t)16)
+
/**
* blk_path_error - returns true if error may be path related
* @error: status the request was completed with
diff --git a/include/linux/clk/samsung.h b/include/linux/clk/samsung.h
new file mode 100644
index 0000000..79097e3
--- /dev/null
+++ b/include/linux/clk/samsung.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __LINUX_CLK_SAMSUNG_H_
+#define __LINUX_CLK_SAMSUNG_H_
+
+#include <linux/compiler_types.h>
+
+struct device_node;
+
+#ifdef CONFIG_ARCH_S3C64XX
+void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
+ unsigned long xusbxti_f, bool s3c6400,
+ void __iomem *base);
+#else
+static inline void s3c64xx_clk_init(struct device_node *np,
+ unsigned long xtal_f,
+ unsigned long xusbxti_f,
+ bool s3c6400, void __iomem *base) { }
+#endif /* CONFIG_ARCH_S3C64XX */
+
+#ifdef CONFIG_S3C2410_COMMON_CLK
+void s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
+ int current_soc,
+ void __iomem *reg_base);
+#else
+static inline void s3c2410_common_clk_init(struct device_node *np,
+ unsigned long xti_f,
+ int current_soc,
+ void __iomem *reg_base) { }
+#endif /* CONFIG_S3C2410_COMMON_CLK */
+
+#ifdef CONFIG_S3C2412_COMMON_CLK
+void s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
+ unsigned long ext_f, void __iomem *reg_base);
+#else
+static inline void s3c2412_common_clk_init(struct device_node *np,
+ unsigned long xti_f,
+ unsigned long ext_f,
+ void __iomem *reg_base) { }
+#endif /* CONFIG_S3C2412_COMMON_CLK */
+
+#ifdef CONFIG_S3C2443_COMMON_CLK
+void s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
+ int current_soc,
+ void __iomem *reg_base);
+#else
+static inline void s3c2443_common_clk_init(struct device_node *np,
+ unsigned long xti_f,
+ int current_soc,
+ void __iomem *reg_base) { }
+#endif /* CONFIG_S3C2443_COMMON_CLK */
+
+#endif /* __LINUX_CLK_SAMSUNG_H_ */
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index ed0da0e..bd605b5 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -271,13 +271,8 @@ struct cpuidle_governor {
void (*reflect) (struct cpuidle_device *dev, int index);
};
-#ifdef CONFIG_CPU_IDLE
extern int cpuidle_register_governor(struct cpuidle_governor *gov);
extern s64 cpuidle_governor_latency_req(unsigned int cpu);
-#else
-static inline int cpuidle_register_governor(struct cpuidle_governor *gov)
-{return 0;}
-#endif
#define __CPU_PM_CPU_IDLE_ENTER(low_level_idle_enter, \
idx, \
diff --git a/include/linux/dma-map-ops.h b/include/linux/dma-map-ops.h
index 8029f7e..a5f89fc 100644
--- a/include/linux/dma-map-ops.h
+++ b/include/linux/dma-map-ops.h
@@ -203,6 +203,29 @@ static inline int dma_mmap_from_global_coherent(struct vm_area_struct *vma,
}
#endif /* CONFIG_DMA_DECLARE_COHERENT */
+int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size,
+ unsigned long attrs);
+int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size,
+ unsigned long attrs);
+struct page *dma_common_alloc_pages(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, enum dma_data_direction dir, gfp_t gfp);
+void dma_common_free_pages(struct device *dev, size_t size, struct page *vaddr,
+ dma_addr_t dma_handle, enum dma_data_direction dir);
+
+struct page **dma_common_find_pages(void *cpu_addr);
+void *dma_common_contiguous_remap(struct page *page, size_t size, pgprot_t prot,
+ const void *caller);
+void *dma_common_pages_remap(struct page **pages, size_t size, pgprot_t prot,
+ const void *caller);
+void dma_common_free_remap(void *cpu_addr, size_t size);
+
+struct page *dma_alloc_from_pool(struct device *dev, size_t size,
+ void **cpu_addr, gfp_t flags,
+ bool (*phys_addr_ok)(struct device *, phys_addr_t, size_t));
+bool dma_free_from_pool(struct device *dev, void *start, size_t size);
+
#ifdef CONFIG_ARCH_HAS_DMA_COHERENCE_H
#include <asm/dma-coherence.h>
#elif defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE) || \
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 3f029af..9561510 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -389,30 +389,6 @@ static inline void dma_sync_sgtable_for_device(struct device *dev,
#define dma_get_sgtable(d, t, v, h, s) dma_get_sgtable_attrs(d, t, v, h, s, 0)
#define dma_mmap_coherent(d, v, c, h, s) dma_mmap_attrs(d, v, c, h, s, 0)
-extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
- void *cpu_addr, dma_addr_t dma_addr, size_t size,
- unsigned long attrs);
-struct page *dma_common_alloc_pages(struct device *dev, size_t size,
- dma_addr_t *dma_handle, enum dma_data_direction dir, gfp_t gfp);
-void dma_common_free_pages(struct device *dev, size_t size, struct page *vaddr,
- dma_addr_t dma_handle, enum dma_data_direction dir);
-struct page **dma_common_find_pages(void *cpu_addr);
-void *dma_common_contiguous_remap(struct page *page, size_t size,
- pgprot_t prot, const void *caller);
-
-void *dma_common_pages_remap(struct page **pages, size_t size,
- pgprot_t prot, const void *caller);
-void dma_common_free_remap(void *cpu_addr, size_t size);
-
-struct page *dma_alloc_from_pool(struct device *dev, size_t size,
- void **cpu_addr, gfp_t flags,
- bool (*phys_addr_ok)(struct device *, phys_addr_t, size_t));
-bool dma_free_from_pool(struct device *dev, void *start, size_t size);
-
-int
-dma_common_get_sgtable(struct device *dev, struct sg_table *sgt, void *cpu_addr,
- dma_addr_t dma_addr, size_t size, unsigned long attrs);
-
static inline void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp)
{
diff --git a/include/linux/fcntl.h b/include/linux/fcntl.h
index 7bcdcf4..921e750 100644
--- a/include/linux/fcntl.h
+++ b/include/linux/fcntl.h
@@ -8,7 +8,7 @@
/* List of all valid flags for the open/openat flags argument: */
#define VALID_OPEN_FLAGS \
(O_RDONLY | O_WRONLY | O_RDWR | O_CREAT | O_EXCL | O_NOCTTY | O_TRUNC | \
- O_APPEND | O_NDELAY | O_NONBLOCK | O_NDELAY | __O_SYNC | O_DSYNC | \
+ O_APPEND | O_NDELAY | O_NONBLOCK | __O_SYNC | O_DSYNC | \
FASYNC | O_DIRECT | O_LARGEFILE | O_DIRECTORY | O_NOFOLLOW | \
O_NOATIME | O_CLOEXEC | O_PATH | __O_TMPFILE)
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 20fc24c..72d62cb 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -607,12 +607,21 @@ struct bpf_skb_data_end {
void *data_end;
};
+struct bpf_nh_params {
+ u32 nh_family;
+ union {
+ u32 ipv4_nh;
+ struct in6_addr ipv6_nh;
+ };
+};
+
struct bpf_redirect_info {
u32 flags;
u32 tgt_index;
void *tgt_value;
struct bpf_map *map;
u32 kern_flags;
+ struct bpf_nh_params nh;
};
DECLARE_PER_CPU(struct bpf_redirect_info, bpf_redirect_info);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 16e3789..0bd1264 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -3096,30 +3096,18 @@ extern const struct inode_operations simple_symlink_inode_operations;
extern int iterate_dir(struct file *, struct dir_context *);
-extern int vfs_statx(int, const char __user *, int, struct kstat *, u32);
-extern int vfs_statx_fd(unsigned int, struct kstat *, u32, unsigned int);
+int vfs_fstatat(int dfd, const char __user *filename, struct kstat *stat,
+ int flags);
+int vfs_fstat(int fd, struct kstat *stat);
static inline int vfs_stat(const char __user *filename, struct kstat *stat)
{
- return vfs_statx(AT_FDCWD, filename, AT_NO_AUTOMOUNT,
- stat, STATX_BASIC_STATS);
+ return vfs_fstatat(AT_FDCWD, filename, stat, 0);
}
static inline int vfs_lstat(const char __user *name, struct kstat *stat)
{
- return vfs_statx(AT_FDCWD, name, AT_SYMLINK_NOFOLLOW | AT_NO_AUTOMOUNT,
- stat, STATX_BASIC_STATS);
+ return vfs_fstatat(AT_FDCWD, name, stat, AT_SYMLINK_NOFOLLOW);
}
-static inline int vfs_fstatat(int dfd, const char __user *filename,
- struct kstat *stat, int flags)
-{
- return vfs_statx(dfd, filename, flags | AT_NO_AUTOMOUNT,
- stat, STATX_BASIC_STATS);
-}
-static inline int vfs_fstat(int fd, struct kstat *stat)
-{
- return vfs_statx_fd(fd, stat, STATX_BASIC_STATS, 0);
-}
-
extern const char *vfs_get_link(struct dentry *, struct delayed_call *);
extern int vfs_readlink(struct dentry *, char __user *, int);
diff --git a/include/linux/hil_mlc.h b/include/linux/hil_mlc.h
index 774f7d3..369221f 100644
--- a/include/linux/hil_mlc.h
+++ b/include/linux/hil_mlc.h
@@ -103,7 +103,7 @@ struct hilse_node {
/* Methods for back-end drivers, e.g. hp_sdc_mlc */
typedef int (hil_mlc_cts) (hil_mlc *mlc);
-typedef void (hil_mlc_out) (hil_mlc *mlc);
+typedef int (hil_mlc_out) (hil_mlc *mlc);
typedef int (hil_mlc_in) (hil_mlc *mlc, suseconds_t timeout);
struct hil_mlc_devinfo {
diff --git a/include/linux/intel_rapl.h b/include/linux/intel_rapl.h
index 3582176..50b8398 100644
--- a/include/linux/intel_rapl.h
+++ b/include/linux/intel_rapl.h
@@ -79,8 +79,10 @@ struct rapl_power_limit {
struct rapl_package;
+#define RAPL_DOMAIN_NAME_LENGTH 16
+
struct rapl_domain {
- const char *name;
+ char name[RAPL_DOMAIN_NAME_LENGTH];
enum rapl_domain_type id;
u64 regs[RAPL_DOMAIN_REG_MAX];
struct powercap_zone power_zone;
@@ -152,7 +154,4 @@ struct rapl_package *rapl_find_package_domain(int cpu, struct rapl_if_priv *priv
struct rapl_package *rapl_add_package(int cpu, struct rapl_if_priv *priv);
void rapl_remove_package(struct rapl_package *rp);
-int rapl_add_platform_domain(struct rapl_if_priv *priv);
-void rapl_remove_platform_domain(struct rapl_if_priv *priv);
-
#endif /* __INTEL_RAPL_H__ */
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index 1dcd919..0a9dc40 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -106,12 +106,6 @@ struct io_context {
unsigned short ioprio;
- /*
- * For request batching
- */
- int nr_batch_requests; /* Number of requests left in the batch */
- unsigned long last_waited; /* Time last woken after wait for request */
-
struct radix_tree_root icq_tree;
struct io_cq __rcu *icq_hint;
struct hlist_head icq_list;
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 05eea1a..d5a983d 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -28,8 +28,7 @@
* bit 16-27: update value
* bit 31: 1 - update, 0 - no update
*/
-#define CMDQ_WFE_OPTION (CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | \
- CMDQ_WFE_WAIT_VALUE)
+#define CMDQ_WFE_OPTION (CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE)
/** cmdq event maximum */
#define CMDQ_MAX_EVENT 0x3ff
@@ -60,6 +59,9 @@ enum cmdq_code {
CMDQ_CODE_JUMP = 0x10,
CMDQ_CODE_WFE = 0x20,
CMDQ_CODE_EOC = 0x40,
+ CMDQ_CODE_READ_S = 0x80,
+ CMDQ_CODE_WRITE_S = 0x90,
+ CMDQ_CODE_WRITE_S_MASK = 0x91,
CMDQ_CODE_LOGIC = 0xa0,
};
diff --git a/include/linux/mount.h b/include/linux/mount.h
index de657bd..aaf343b 100644
--- a/include/linux/mount.h
+++ b/include/linux/mount.h
@@ -30,6 +30,7 @@ struct fs_context;
#define MNT_NODIRATIME 0x10
#define MNT_RELATIME 0x20
#define MNT_READONLY 0x40 /* does the user want this to be r/o? */
+#define MNT_NOSYMFOLLOW 0x80
#define MNT_SHRINKABLE 0x100
#define MNT_WRITE_HOLD 0x200
@@ -46,7 +47,7 @@ struct fs_context;
#define MNT_SHARED_MASK (MNT_UNBINDABLE)
#define MNT_USER_SETTABLE_MASK (MNT_NOSUID | MNT_NODEV | MNT_NOEXEC \
| MNT_NOATIME | MNT_NODIRATIME | MNT_RELATIME \
- | MNT_READONLY)
+ | MNT_READONLY | MNT_NOSYMFOLLOW)
#define MNT_ATIME_MASK (MNT_NOATIME | MNT_NODIRATIME | MNT_RELATIME )
#define MNT_INTERNAL_FLAGS (MNT_SHARED | MNT_WRITE_HOLD | MNT_INTERNAL | \
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 666cd03..9f11877 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -240,7 +240,7 @@ struct netlink_dump_control {
int (*done)(struct netlink_callback *);
void *data;
struct module *module;
- u16 min_dump_alloc;
+ u32 min_dump_alloc;
};
int __netlink_dump_start(struct sock *ssk, struct sk_buff *skb,
diff --git a/include/linux/platform_data/clk-s3c2410.h b/include/linux/platform_data/clk-s3c2410.h
new file mode 100644
index 0000000..7eb1cfa
--- /dev/null
+++ b/include/linux/platform_data/clk-s3c2410.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_CLK_S3C2410_H_
+#define __LINUX_PLATFORM_DATA_CLK_S3C2410_H_
+
+/**
+ * struct s3c2410_clk_platform_data - platform data for S3C2410 clock driver
+ *
+ * @modify_misccr: Function to modify the MISCCR and return the new value
+ */
+struct s3c2410_clk_platform_data {
+ unsigned int (*modify_misccr)(unsigned int clr, unsigned int chg);
+};
+
+#endif /* __LINUX_PLATFORM_DATA_CLK_S3C2410_H_ */
+
diff --git a/include/linux/platform_data/fb-s3c2410.h b/include/linux/platform_data/fb-s3c2410.h
new file mode 100644
index 0000000..10c11e6
--- /dev/null
+++ b/include/linux/platform_data/fb-s3c2410.h
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * Inspired by pxafb.h
+*/
+
+#ifndef __ASM_PLAT_FB_S3C2410_H
+#define __ASM_PLAT_FB_S3C2410_H __FILE__
+
+#include <linux/compiler_types.h>
+
+struct s3c2410fb_hw {
+ unsigned long lcdcon1;
+ unsigned long lcdcon2;
+ unsigned long lcdcon3;
+ unsigned long lcdcon4;
+ unsigned long lcdcon5;
+};
+
+/* LCD description */
+struct s3c2410fb_display {
+ /* LCD type */
+ unsigned type;
+#define S3C2410_LCDCON1_DSCAN4 (0<<5)
+#define S3C2410_LCDCON1_STN4 (1<<5)
+#define S3C2410_LCDCON1_STN8 (2<<5)
+#define S3C2410_LCDCON1_TFT (3<<5)
+
+#define S3C2410_LCDCON1_TFT1BPP (8<<1)
+#define S3C2410_LCDCON1_TFT2BPP (9<<1)
+#define S3C2410_LCDCON1_TFT4BPP (10<<1)
+#define S3C2410_LCDCON1_TFT8BPP (11<<1)
+#define S3C2410_LCDCON1_TFT16BPP (12<<1)
+#define S3C2410_LCDCON1_TFT24BPP (13<<1)
+
+ /* Screen size */
+ unsigned short width;
+ unsigned short height;
+
+ /* Screen info */
+ unsigned short xres;
+ unsigned short yres;
+ unsigned short bpp;
+
+ unsigned pixclock; /* pixclock in picoseconds */
+ unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */
+ unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
+ unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */
+ unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */
+ unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */
+ unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */
+
+ /* lcd configuration registers */
+ unsigned long lcdcon5;
+#define S3C2410_LCDCON5_BPP24BL (1<<12)
+#define S3C2410_LCDCON5_FRM565 (1<<11)
+#define S3C2410_LCDCON5_INVVCLK (1<<10)
+#define S3C2410_LCDCON5_INVVLINE (1<<9)
+#define S3C2410_LCDCON5_INVVFRAME (1<<8)
+#define S3C2410_LCDCON5_INVVD (1<<7)
+#define S3C2410_LCDCON5_INVVDEN (1<<6)
+#define S3C2410_LCDCON5_INVPWREN (1<<5)
+#define S3C2410_LCDCON5_INVLEND (1<<4)
+#define S3C2410_LCDCON5_PWREN (1<<3)
+#define S3C2410_LCDCON5_ENLEND (1<<2)
+#define S3C2410_LCDCON5_BSWP (1<<1)
+#define S3C2410_LCDCON5_HWSWP (1<<0)
+};
+
+struct s3c2410fb_mach_info {
+
+ struct s3c2410fb_display *displays; /* attached displays info */
+ unsigned num_displays; /* number of defined displays */
+ unsigned default_display;
+
+ /* GPIOs */
+
+ unsigned long gpcup;
+ unsigned long gpcup_mask;
+ unsigned long gpccon;
+ unsigned long gpccon_mask;
+ unsigned long gpdup;
+ unsigned long gpdup_mask;
+ unsigned long gpdcon;
+ unsigned long gpdcon_mask;
+
+ void __iomem * gpccon_reg;
+ void __iomem * gpcup_reg;
+ void __iomem * gpdcon_reg;
+ void __iomem * gpdup_reg;
+
+ /* lpc3600 control register */
+ unsigned long lpcsel;
+};
+
+extern void s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
+
+#endif /* __ASM_PLAT_FB_S3C2410_H */
diff --git a/include/linux/platform_data/mmc-s3cmci.h b/include/linux/platform_data/mmc-s3cmci.h
index 33310b1..bacb86d 100644
--- a/include/linux/platform_data/mmc-s3cmci.h
+++ b/include/linux/platform_data/mmc-s3cmci.h
@@ -35,6 +35,7 @@ struct s3c24xx_mci_pdata {
unsigned long ocr_avail;
void (*set_power)(unsigned char power_mode,
unsigned short vdd);
+ struct gpio_desc *bus[6];
};
/**
@@ -44,6 +45,7 @@ struct s3c24xx_mci_pdata {
* Copy the platform data supplied by @pdata so that this can be marked
* __initdata.
*/
+extern void s3c24xx_mci_def_set_power(unsigned char power_mode, unsigned short vdd);
extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
#endif /* _ARCH_NCI_H */
diff --git a/include/linux/platform_data/pm33xx.h b/include/linux/platform_data/pm33xx.h
index 644af1d..7037ba7 100644
--- a/include/linux/platform_data/pm33xx.h
+++ b/include/linux/platform_data/pm33xx.h
@@ -54,11 +54,8 @@ struct am33xx_pm_platform_data {
void (*begin_suspend)(void);
void (*finish_suspend)(void);
struct am33xx_pm_sram_addr *(*get_sram_addrs)(void);
- void __iomem *(*get_rtc_base_addr)(void);
void (*save_context)(void);
void (*restore_context)(void);
- void (*prepare_rtc_suspend)(void);
- void (*prepare_rtc_resume)(void);
int (*check_off_mode_enable)(void);
};
diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h
index 4dc9b87..a170939 100644
--- a/include/linux/platform_data/s3c-hsudc.h
+++ b/include/linux/platform_data/s3c-hsudc.h
@@ -26,6 +26,8 @@ struct s3c24xx_hsudc_platdata {
unsigned int epnum;
void (*gpio_init)(void);
void (*gpio_uninit)(void);
+ void (*phy_init)(void);
+ void (*phy_uninit)(void);
};
#endif /* __LINUX_USB_S3C_HSUDC_H */
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index 66f3c5d..1ad0ec4 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -68,6 +68,13 @@ enum gpd_status {
GENPD_STATE_OFF, /* PM domain is off */
};
+enum genpd_notication {
+ GENPD_NOTIFY_PRE_OFF = 0,
+ GENPD_NOTIFY_OFF,
+ GENPD_NOTIFY_PRE_ON,
+ GENPD_NOTIFY_ON,
+};
+
struct dev_power_governor {
bool (*power_down_ok)(struct dev_pm_domain *domain);
bool (*suspend_ok)(struct device *dev);
@@ -82,6 +89,8 @@ struct genpd_power_state {
s64 power_off_latency_ns;
s64 power_on_latency_ns;
s64 residency_ns;
+ u64 usage;
+ u64 rejected;
struct fwnode_handle *fwnode;
ktime_t idle_time;
void *data;
@@ -112,6 +121,7 @@ struct generic_pm_domain {
cpumask_var_t cpus; /* A cpumask of the attached CPUs */
int (*power_off)(struct generic_pm_domain *domain);
int (*power_on)(struct generic_pm_domain *domain);
+ struct raw_notifier_head power_notifiers; /* Power on/off notifiers */
struct opp_table *opp_table; /* OPP table of the genpd */
unsigned int (*opp_to_performance_state)(struct generic_pm_domain *genpd,
struct dev_pm_opp *opp);
@@ -178,6 +188,7 @@ struct generic_pm_domain_data {
struct pm_domain_data base;
struct gpd_timing_data td;
struct notifier_block nb;
+ struct notifier_block *power_nb;
int cpu;
unsigned int performance_state;
void *data;
@@ -204,6 +215,8 @@ int pm_genpd_init(struct generic_pm_domain *genpd,
struct dev_power_governor *gov, bool is_off);
int pm_genpd_remove(struct generic_pm_domain *genpd);
int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state);
+int dev_pm_genpd_add_notifier(struct device *dev, struct notifier_block *nb);
+int dev_pm_genpd_remove_notifier(struct device *dev);
extern struct dev_power_governor simple_qos_governor;
extern struct dev_power_governor pm_domain_always_on_gov;
@@ -251,6 +264,17 @@ static inline int dev_pm_genpd_set_performance_state(struct device *dev,
return -ENOTSUPP;
}
+static inline int dev_pm_genpd_add_notifier(struct device *dev,
+ struct notifier_block *nb)
+{
+ return -ENOTSUPP;
+}
+
+static inline int dev_pm_genpd_remove_notifier(struct device *dev)
+{
+ return -ENOTSUPP;
+}
+
#define simple_qos_governor (*(struct dev_power_governor *)(NULL))
#define pm_domain_always_on_gov (*(struct dev_power_governor *)(NULL))
#endif
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index 6245caa..18b02dc 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -479,7 +479,7 @@ static inline int pm_runtime_set_active(struct device *dev)
}
/**
- * pm_runtime_set_suspended - Set runtime PM status to "active".
+ * pm_runtime_set_suspended - Set runtime PM status to "suspended".
* @dev: Target device.
*
* Set the runtime PM status of @dev to %RPM_SUSPENDED and ensure that
diff --git a/include/linux/prandom.h b/include/linux/prandom.h
index aa16e64..bbf4b4a 100644
--- a/include/linux/prandom.h
+++ b/include/linux/prandom.h
@@ -16,12 +16,62 @@ void prandom_bytes(void *buf, size_t nbytes);
void prandom_seed(u32 seed);
void prandom_reseed_late(void);
+DECLARE_PER_CPU(unsigned long, net_rand_noise);
+
+#define PRANDOM_ADD_NOISE(a, b, c, d) \
+ prandom_u32_add_noise((unsigned long)(a), (unsigned long)(b), \
+ (unsigned long)(c), (unsigned long)(d))
+
+#if BITS_PER_LONG == 64
+/*
+ * The core SipHash round function. Each line can be executed in
+ * parallel given enough CPU resources.
+ */
+#define PRND_SIPROUND(v0, v1, v2, v3) ( \
+ v0 += v1, v1 = rol64(v1, 13), v2 += v3, v3 = rol64(v3, 16), \
+ v1 ^= v0, v0 = rol64(v0, 32), v3 ^= v2, \
+ v0 += v3, v3 = rol64(v3, 21), v2 += v1, v1 = rol64(v1, 17), \
+ v3 ^= v0, v1 ^= v2, v2 = rol64(v2, 32) \
+)
+
+#define PRND_K0 (0x736f6d6570736575 ^ 0x6c7967656e657261)
+#define PRND_K1 (0x646f72616e646f6d ^ 0x7465646279746573)
+
+#elif BITS_PER_LONG == 32
+/*
+ * On 32-bit machines, we use HSipHash, a reduced-width version of SipHash.
+ * This is weaker, but 32-bit machines are not used for high-traffic
+ * applications, so there is less output for an attacker to analyze.
+ */
+#define PRND_SIPROUND(v0, v1, v2, v3) ( \
+ v0 += v1, v1 = rol32(v1, 5), v2 += v3, v3 = rol32(v3, 8), \
+ v1 ^= v0, v0 = rol32(v0, 16), v3 ^= v2, \
+ v0 += v3, v3 = rol32(v3, 7), v2 += v1, v1 = rol32(v1, 13), \
+ v3 ^= v0, v1 ^= v2, v2 = rol32(v2, 16) \
+)
+#define PRND_K0 0x6c796765
+#define PRND_K1 0x74656462
+
+#else
+#error Unsupported BITS_PER_LONG
+#endif
+
+static inline void prandom_u32_add_noise(unsigned long a, unsigned long b,
+ unsigned long c, unsigned long d)
+{
+ /*
+ * This is not used cryptographically; it's just
+ * a convenient 4-word hash function. (3 xor, 2 add, 2 rol)
+ */
+ a ^= raw_cpu_read(net_rand_noise);
+ PRND_SIPROUND(a, b, c, d);
+ raw_cpu_write(net_rand_noise, d);
+}
+
struct rnd_state {
__u32 s1, s2, s3, s4;
};
-DECLARE_PER_CPU(struct rnd_state, net_rand_state);
-
u32 prandom_u32_state(struct rnd_state *state);
void prandom_bytes_state(struct rnd_state *state, void *buf, size_t nbytes);
void prandom_seed_full_state(struct rnd_state __percpu *pcpu_state);
@@ -67,6 +117,7 @@ static inline void prandom_seed_state(struct rnd_state *state, u64 seed)
state->s2 = __seed(i, 8U);
state->s3 = __seed(i, 16U);
state->s4 = __seed(i, 128U);
+ PRANDOM_ADD_NOISE(state, i, 0, 0);
}
/* Pseudo random number generator from numerical recipes. */
diff --git a/include/linux/pruss_driver.h b/include/linux/pruss_driver.h
new file mode 100644
index 0000000..ecfded3
--- /dev/null
+++ b/include/linux/pruss_driver.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * PRU-ICSS sub-system specific definitions
+ *
+ * Copyright (C) 2014-2020 Texas Instruments Incorporated - http://www.ti.com/
+ * Suman Anna <s-anna@ti.com>
+ */
+
+#ifndef _PRUSS_DRIVER_H_
+#define _PRUSS_DRIVER_H_
+
+#include <linux/types.h>
+
+/*
+ * enum pruss_mem - PRUSS memory range identifiers
+ */
+enum pruss_mem {
+ PRUSS_MEM_DRAM0 = 0,
+ PRUSS_MEM_DRAM1,
+ PRUSS_MEM_SHRD_RAM2,
+ PRUSS_MEM_MAX,
+};
+
+/**
+ * struct pruss_mem_region - PRUSS memory region structure
+ * @va: kernel virtual address of the PRUSS memory region
+ * @pa: physical (bus) address of the PRUSS memory region
+ * @size: size of the PRUSS memory region
+ */
+struct pruss_mem_region {
+ void __iomem *va;
+ phys_addr_t pa;
+ size_t size;
+};
+
+/**
+ * struct pruss - PRUSS parent structure
+ * @dev: pruss device pointer
+ * @cfg_base: base iomap for CFG region
+ * @cfg_regmap: regmap for config region
+ * @mem_regions: data for each of the PRUSS memory regions
+ * @core_clk_mux: clk handle for PRUSS CORE_CLK_MUX
+ * @iep_clk_mux: clk handle for PRUSS IEP_CLK_MUX
+ */
+struct pruss {
+ struct device *dev;
+ void __iomem *cfg_base;
+ struct regmap *cfg_regmap;
+ struct pruss_mem_region mem_regions[PRUSS_MEM_MAX];
+ struct clk *core_clk_mux;
+ struct clk *iep_clk_mux;
+};
+
+#endif /* _PRUSS_DRIVER_H_ */
diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h
index 1c31f26..f7bbea3 100644
--- a/include/linux/qcom-geni-se.h
+++ b/include/linux/qcom-geni-se.h
@@ -299,7 +299,7 @@ static inline void geni_se_setup_m_cmd(struct geni_se *se, u32 cmd, u32 params)
u32 m_cmd;
m_cmd = (cmd << M_OPCODE_SHFT) | (params & M_PARAMS_MSK);
- writel_relaxed(m_cmd, se->base + SE_GENI_M_CMD0);
+ writel(m_cmd, se->base + SE_GENI_M_CMD0);
}
/**
@@ -319,7 +319,7 @@ static inline void geni_se_setup_s_cmd(struct geni_se *se, u32 cmd, u32 params)
s_cmd &= ~(S_OPCODE_MSK | S_PARAMS_MSK);
s_cmd |= (cmd << S_OPCODE_SHFT);
s_cmd |= (params & S_PARAMS_MSK);
- writel_relaxed(s_cmd, se->base + SE_GENI_S_CMD0);
+ writel(s_cmd, se->base + SE_GENI_S_CMD0);
}
/**
diff --git a/include/linux/rmi.h b/include/linux/rmi.h
index 8ed37f9..ab7eea0 100644
--- a/include/linux/rmi.h
+++ b/include/linux/rmi.h
@@ -102,15 +102,16 @@ struct rmi_2d_sensor_platform_data {
};
/**
- * struct rmi_f30_data - overrides defaults for a single F30 GPIOs/LED chip.
+ * struct rmi_gpio_data - overrides defaults for a single F30/F3A GPIOs/LED
+ * chip.
* @buttonpad - the touchpad is a buttonpad, so enable only the first actual
* button that is found.
- * @trackstick_buttons - Set when the function 30 is handling the physical
+ * @trackstick_buttons - Set when the function 30 or 3a is handling the physical
* buttons of the trackstick (as a PS/2 passthrough device).
- * @disable - the touchpad incorrectly reports F30 and it should be ignored.
+ * @disable - the touchpad incorrectly reports F30/F3A and it should be ignored.
* This is a special case which is due to misconfigured firmware.
*/
-struct rmi_f30_data {
+struct rmi_gpio_data {
bool buttonpad;
bool trackstick_buttons;
bool disable;
@@ -218,7 +219,7 @@ struct rmi_device_platform_data {
/* function handler pdata */
struct rmi_2d_sensor_platform_data sensor_pdata;
struct rmi_f01_power_management power_management;
- struct rmi_f30_data f30_data;
+ struct rmi_gpio_data gpio_data;
};
/**
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index 7e5dd7d..9cd312a 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -279,12 +279,12 @@ struct scmi_notify_ops {
struct scmi_handle {
struct device *dev;
struct scmi_revision_info *version;
- struct scmi_perf_ops *perf_ops;
- struct scmi_clk_ops *clk_ops;
- struct scmi_power_ops *power_ops;
- struct scmi_sensor_ops *sensor_ops;
- struct scmi_reset_ops *reset_ops;
- struct scmi_notify_ops *notify_ops;
+ const struct scmi_perf_ops *perf_ops;
+ const struct scmi_clk_ops *clk_ops;
+ const struct scmi_power_ops *power_ops;
+ const struct scmi_sensor_ops *sensor_ops;
+ const struct scmi_reset_ops *reset_ops;
+ const struct scmi_notify_ops *notify_ops;
/* for protocol internal use */
void *perf_priv;
void *clk_priv;
@@ -292,6 +292,7 @@ struct scmi_handle {
void *sensor_priv;
void *reset_priv;
void *notify_priv;
+ void *system_priv;
};
enum scmi_std_protocol {
@@ -304,6 +305,15 @@ enum scmi_std_protocol {
SCMI_PROTOCOL_RESET = 0x16,
};
+enum scmi_system_events {
+ SCMI_SYSTEM_SHUTDOWN,
+ SCMI_SYSTEM_COLDRESET,
+ SCMI_SYSTEM_WARMRESET,
+ SCMI_SYSTEM_POWERUP,
+ SCMI_SYSTEM_SUSPEND,
+ SCMI_SYSTEM_MAX
+};
+
struct scmi_device {
u32 id;
u8 protocol_id;
@@ -335,7 +345,7 @@ struct scmi_driver {
#define to_scmi_driver(d) container_of(d, struct scmi_driver, driver)
-#ifdef CONFIG_ARM_SCMI_PROTOCOL
+#if IS_REACHABLE(CONFIG_ARM_SCMI_PROTOCOL)
int scmi_driver_register(struct scmi_driver *driver,
struct module *owner, const char *mod_name);
void scmi_driver_unregister(struct scmi_driver *driver);
@@ -378,6 +388,7 @@ enum scmi_notification_events {
SCMI_EVENT_SENSOR_TRIP_POINT_EVENT = 0x0,
SCMI_EVENT_RESET_ISSUED = 0x0,
SCMI_EVENT_BASE_ERROR_EVENT = 0x0,
+ SCMI_EVENT_SYSTEM_POWER_STATE_NOTIFIER = 0x0,
};
struct scmi_power_state_changed_report {
@@ -387,6 +398,13 @@ struct scmi_power_state_changed_report {
unsigned int power_state;
};
+struct scmi_system_power_state_notifier_report {
+ ktime_t timestamp;
+ unsigned int agent_id;
+ unsigned int flags;
+ unsigned int system_state;
+};
+
struct scmi_perf_limits_report {
ktime_t timestamp;
unsigned int agent_id;
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 2249eca..960704d 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -12,6 +12,8 @@
#include <linux/timer.h>
#define CMDQ_NO_TIMEOUT 0xffffffffu
+#define CMDQ_ADDR_HIGH(addr) ((u32)(((addr) >> 16) & GENMASK(31, 0)))
+#define CMDQ_ADDR_LOW(addr) ((u16)(addr) | BIT(1))
struct cmdq_pkt;
@@ -102,14 +104,90 @@ int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
u16 offset, u32 value, u32 mask);
-/**
- * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
+/*
+ * cmdq_pkt_read_s() - append read_s command to the CMDQ packet
* @pkt: the CMDQ packet
- * @event: the desired event type to "wait and CLEAR"
+ * @high_addr_reg_idx: internal register ID which contains high address of pa
+ * @addr_low: low address of pa
+ * @reg_idx: the CMDQ internal register ID to cache read data
*
* Return: 0 for success; else the error code is returned
*/
-int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event);
+int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low,
+ u16 reg_idx);
+
+/**
+ * cmdq_pkt_write_s() - append write_s command to the CMDQ packet
+ * @pkt: the CMDQ packet
+ * @high_addr_reg_idx: internal register ID which contains high address of pa
+ * @addr_low: low address of pa
+ * @src_reg_idx: the CMDQ internal register ID which cache source value
+ *
+ * Return: 0 for success; else the error code is returned
+ *
+ * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
+ * to get high address and call cmdq_pkt_assign() to assign value into internal
+ * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when
+ * call to this function.
+ */
+int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+ u16 addr_low, u16 src_reg_idx);
+
+/**
+ * cmdq_pkt_write_s_mask() - append write_s with mask command to the CMDQ packet
+ * @pkt: the CMDQ packet
+ * @high_addr_reg_idx: internal register ID which contains high address of pa
+ * @addr_low: low address of pa
+ * @src_reg_idx: the CMDQ internal register ID which cache source value
+ * @mask: the specified target address mask, use U32_MAX if no need
+ *
+ * Return: 0 for success; else the error code is returned
+ *
+ * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
+ * to get high address and call cmdq_pkt_assign() to assign value into internal
+ * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when
+ * call to this function.
+ */
+int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+ u16 addr_low, u16 src_reg_idx, u32 mask);
+
+/**
+ * cmdq_pkt_write_s_value() - append write_s command to the CMDQ packet which
+ * write value to a physical address
+ * @pkt: the CMDQ packet
+ * @high_addr_reg_idx: internal register ID which contains high address of pa
+ * @addr_low: low address of pa
+ * @value: the specified target value
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
+ u16 addr_low, u32 value);
+
+/**
+ * cmdq_pkt_write_s_mask_value() - append write_s command with mask to the CMDQ
+ * packet which write value to a physical
+ * address
+ * @pkt: the CMDQ packet
+ * @high_addr_reg_idx: internal register ID which contains high address of pa
+ * @addr_low: low address of pa
+ * @value: the specified target value
+ * @mask: the specified target mask
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
+ u16 addr_low, u32 value, u32 mask);
+
+/**
+ * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
+ * @pkt: the CMDQ packet
+ * @event: the desired event type to wait
+ * @clear: clear event or not after event arrive
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear);
/**
* cmdq_pkt_clear_event() - append clear event command to the CMDQ packet
@@ -176,6 +254,17 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value);
/**
+ * cmdq_pkt_jump() - Append jump command to the CMDQ packet, ask GCE
+ * to execute an instruction that change current thread PC to
+ * a physical address which should contains more instruction.
+ * @pkt: the CMDQ packet
+ * @addr: physical address of target instruction buffer
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr);
+
+/**
* cmdq_pkt_finalize() - Append EOC and jump command to pkt.
* @pkt: the CMDQ packet
*
diff --git a/arch/arm/plat-samsung/include/plat/adc.h b/include/linux/soc/samsung/s3c-adc.h
similarity index 85%
rename from arch/arm/plat-samsung/include/plat/adc.h
rename to include/linux/soc/samsung/s3c-adc.h
index 74d1a46..591c94e 100644
--- a/arch/arm/plat-samsung/include/plat/adc.h
+++ b/include/linux/soc/samsung/s3c-adc.h
@@ -7,8 +7,8 @@
* S3C ADC driver information
*/
-#ifndef __ASM_PLAT_ADC_H
-#define __ASM_PLAT_ADC_H __FILE__
+#ifndef __LINUX_SOC_SAMSUNG_S3C_ADC_H
+#define __LINUX_SOC_SAMSUNG_S3C_ADC_H __FILE__
struct s3c_adc_client;
struct platform_device;
@@ -29,4 +29,4 @@ extern struct s3c_adc_client *
extern void s3c_adc_release(struct s3c_adc_client *client);
-#endif /* __ASM_PLAT_ADC_H */
+#endif /* __LINUX_SOC_SAMSUNG_S3C_ADC_H */
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq.h b/include/linux/soc/samsung/s3c-cpu-freq.h
similarity index 97%
rename from arch/arm/plat-samsung/include/plat/cpu-freq.h
rename to include/linux/soc/samsung/s3c-cpu-freq.h
index 558892b..63e88fd 100644
--- a/arch/arm/plat-samsung/include/plat/cpu-freq.h
+++ b/include/linux/soc/samsung/s3c-cpu-freq.h
@@ -6,6 +6,8 @@
*
* S3C CPU frequency scaling support - driver and board
*/
+#ifndef __LINUX_SOC_SAMSUNG_S3C_CPU_FREQ_H
+#define __LINUX_SOC_SAMSUNG_S3C_CPU_FREQ_H
#include <linux/cpufreq.h>
@@ -139,3 +141,5 @@ static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
return 0;
}
#endif /* CONFIG_ARM_S3C_CPUFREQ */
+
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/include/linux/soc/samsung/s3c-cpufreq-core.h
similarity index 94%
rename from arch/arm/plat-samsung/include/plat/cpu-freq-core.h
rename to include/linux/soc/samsung/s3c-cpufreq-core.h
index 2c7cf26..3b278af 100644
--- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
+++ b/include/linux/soc/samsung/s3c-cpufreq-core.h
@@ -6,8 +6,10 @@
*
* S3C CPU frequency scaling support - core support
*/
+#ifndef __LINUX_SOC_SAMSUNG_S3C_CPUFREQ_CORE_H
+#define __LINUX_SOC_SAMSUNG_S3C_CPUFREQ_CORE_H
-#include <plat/cpu-freq.h>
+#include <linux/soc/samsung/s3c-cpu-freq.h>
struct seq_file;
@@ -246,6 +248,7 @@ extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *iot);
+extern void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
#else
#define s3c2412_iotiming_debugfs NULL
#define s3c2412_iotiming_calc NULL
@@ -285,3 +288,12 @@ static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
return index + 1;
}
+
+u32 s3c2440_read_camdivn(void);
+void s3c2440_write_camdivn(u32 camdiv);
+u32 s3c24xx_read_clkdivn(void);
+void s3c24xx_write_clkdivn(u32 clkdiv);
+u32 s3c24xx_read_mpllcon(void);
+void s3c24xx_write_locktime(u32 locktime);
+
+#endif
diff --git a/include/linux/soc/samsung/s3c-pm.h b/include/linux/soc/samsung/s3c-pm.h
new file mode 100644
index 0000000..f916455
--- /dev/null
+++ b/include/linux/soc/samsung/s3c-pm.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Tomasz Figa <t.figa@samsung.com>
+ * Copyright (c) 2004 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Written by Ben Dooks, <ben@simtec.co.uk>
+ */
+
+#ifndef __LINUX_SOC_SAMSUNG_S3C_PM_H
+#define __LINUX_SOC_SAMSUNG_S3C_PM_H __FILE__
+
+#include <linux/types.h>
+
+/* PM debug functions */
+
+/**
+ * struct pm_uart_save - save block for core UART
+ * @ulcon: Save value for S3C2410_ULCON
+ * @ucon: Save value for S3C2410_UCON
+ * @ufcon: Save value for S3C2410_UFCON
+ * @umcon: Save value for S3C2410_UMCON
+ * @ubrdiv: Save value for S3C2410_UBRDIV
+ *
+ * Save block for UART registers to be held over sleep and restored if they
+ * are needed (say by debug).
+*/
+struct pm_uart_save {
+ u32 ulcon;
+ u32 ucon;
+ u32 ufcon;
+ u32 umcon;
+ u32 ubrdiv;
+ u32 udivslot;
+};
+
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+/**
+ * s3c_pm_dbg() - low level debug function for use in suspend/resume.
+ * @msg: The message to print.
+ *
+ * This function is used mainly to debug the resume process before the system
+ * can rely on printk/console output. It uses the low-level debugging output
+ * routine printascii() to do its work.
+ */
+extern void s3c_pm_dbg(const char *msg, ...);
+
+#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
+
+extern void s3c_pm_save_uarts(bool is_s3c24xx);
+extern void s3c_pm_restore_uarts(bool is_s3c24xx);
+
+#ifdef CONFIG_ARCH_S3C64XX
+extern void s3c_pm_arch_update_uart(void __iomem *regs,
+ struct pm_uart_save *save);
+#else
+static inline void
+s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
+{
+}
+#endif
+
+#else
+#define S3C_PMDBG(fmt...) pr_debug(fmt)
+
+static inline void s3c_pm_save_uarts(bool is_s3c24xx) { }
+static inline void s3c_pm_restore_uarts(bool is_s3c24xx) { }
+#endif
+
+/* suspend memory checking */
+
+#ifdef CONFIG_SAMSUNG_PM_CHECK
+extern void s3c_pm_check_prepare(void);
+extern void s3c_pm_check_restore(void);
+extern void s3c_pm_check_cleanup(void);
+extern void s3c_pm_check_store(void);
+#else
+#define s3c_pm_check_prepare() do { } while (0)
+#define s3c_pm_check_restore() do { } while (0)
+#define s3c_pm_check_cleanup() do { } while (0)
+#define s3c_pm_check_store() do { } while (0)
+#endif
+
+/* system device subsystems */
+
+extern struct bus_type s3c2410_subsys;
+extern struct bus_type s3c2410a_subsys;
+extern struct bus_type s3c2412_subsys;
+extern struct bus_type s3c2416_subsys;
+extern struct bus_type s3c2440_subsys;
+extern struct bus_type s3c2442_subsys;
+extern struct bus_type s3c2443_subsys;
+
+#endif
diff --git a/drivers/spi/spi-s3c24xx-fiq.h b/include/linux/spi/s3c24xx-fiq.h
similarity index 66%
rename from drivers/spi/spi-s3c24xx-fiq.h
rename to include/linux/spi/s3c24xx-fiq.h
index 7786b0e..d2842ac 100644
--- a/drivers/spi/spi-s3c24xx-fiq.h
+++ b/include/linux/spi/s3c24xx-fiq.h
@@ -7,11 +7,19 @@
* S3C24XX SPI - FIQ pseudo-DMA transfer support
*/
+#ifndef __LINUX_SPI_S3C24XX_FIQ_H
+#define __LINUX_SPI_S3C24XX_FIQ_H __FILE__
+
/* We have R8 through R13 to play with */
#ifdef __ASSEMBLY__
#define __REG_NR(x) r##x
#else
+
+extern struct spi_fiq_code s3c24xx_spi_fiq_txrx;
+extern struct spi_fiq_code s3c24xx_spi_fiq_tx;
+extern struct spi_fiq_code s3c24xx_spi_fiq_rx;
+
#define __REG_NR(x) (x)
#endif
@@ -21,3 +29,5 @@
#define fiq_rtx __REG_NR(11)
#define fiq_rcount __REG_NR(12)
#define fiq_rirq __REG_NR(13)
+
+#endif /* __LINUX_SPI_S3C24XX_FIQ_H */
diff --git a/include/linux/spi/s3c24xx.h b/include/linux/spi/s3c24xx.h
index c91d10b..440a715 100644
--- a/include/linux/spi/s3c24xx.h
+++ b/include/linux/spi/s3c24xx.h
@@ -20,6 +20,6 @@ struct s3c2410_spi_info {
void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
};
-extern int s3c24xx_set_fiq(unsigned int irq, bool on);
+extern int s3c24xx_set_fiq(unsigned int irq, u32 *ack_ptr, bool on);
#endif /* __LINUX_SPI_S3C24XX_H */
diff --git a/include/linux/splice.h b/include/linux/splice.h
index 5c47013..a55179f 100644
--- a/include/linux/splice.h
+++ b/include/linux/splice.h
@@ -78,8 +78,8 @@ extern ssize_t add_to_pipe(struct pipe_inode_info *,
struct pipe_buffer *);
extern ssize_t splice_direct_to_actor(struct file *, struct splice_desc *,
splice_direct_actor *);
-extern long do_splice(struct file *in, loff_t __user *off_in,
- struct file *out, loff_t __user *off_out,
+extern long do_splice(struct file *in, loff_t *off_in,
+ struct file *out, loff_t *off_out,
size_t len, unsigned int flags);
extern long do_tee(struct file *in, struct file *out, size_t len,
diff --git a/include/linux/stat.h b/include/linux/stat.h
index 56614af..fff27e6 100644
--- a/include/linux/stat.h
+++ b/include/linux/stat.h
@@ -19,8 +19,6 @@
#include <linux/time.h>
#include <linux/uidgid.h>
-#define KSTAT_QUERY_FLAGS (AT_STATX_SYNC_TYPE)
-
struct kstat {
u32 result_mask; /* What fields the user got */
umode_t mode;
diff --git a/include/linux/statfs.h b/include/linux/statfs.h
index 9bc69ed..20f695b 100644
--- a/include/linux/statfs.h
+++ b/include/linux/statfs.h
@@ -40,8 +40,14 @@ struct kstatfs {
#define ST_NOATIME 0x0400 /* do not update access times */
#define ST_NODIRATIME 0x0800 /* do not update directory access times */
#define ST_RELATIME 0x1000 /* update atime relative to mtime/ctime */
+#define ST_NOSYMFOLLOW 0x2000 /* do not follow symlinks */
struct dentry;
extern int vfs_get_fsid(struct dentry *dentry, __kernel_fsid_t *fsid);
+static inline __kernel_fsid_t u64_to_fsid(u64 v)
+{
+ return (__kernel_fsid_t){.val = {(u32)v, (u32)(v>>32)}};
+}
+
#endif
diff --git a/include/linux/tee_drv.h b/include/linux/tee_drv.h
index d074302..cdd049a 100644
--- a/include/linux/tee_drv.h
+++ b/include/linux/tee_drv.h
@@ -47,6 +47,8 @@ struct tee_shm_pool;
* and just return with an error code. It is needed for requests
* that arises from TEE based kernel drivers that should be
* non-blocking in nature.
+ * @cap_memref_null: flag indicating if the TEE Client support shared
+ * memory buffer with a NULL pointer.
*/
struct tee_context {
struct tee_device *teedev;
@@ -54,6 +56,7 @@ struct tee_context {
struct kref refcount;
bool releasing;
bool supp_nowait;
+ bool cap_memref_null;
};
struct tee_param_memref {
diff --git a/include/linux/uaccess.h b/include/linux/uaccess.h
index b21a2de..c7c6e8b 100644
--- a/include/linux/uaccess.h
+++ b/include/linux/uaccess.h
@@ -33,6 +33,10 @@ typedef struct {
/* empty dummy */
} mm_segment_t;
+#ifndef TASK_SIZE_MAX
+#define TASK_SIZE_MAX TASK_SIZE
+#endif
+
#define uaccess_kernel() (false)
#define user_addr_max() (TASK_SIZE_MAX)
diff --git a/include/media/drv-intf/s3c_camif.h b/include/media/drv-intf/s3c_camif.h
index d1200b4..f746851 100644
--- a/include/media/drv-intf/s3c_camif.h
+++ b/include/media/drv-intf/s3c_camif.h
@@ -35,8 +35,4 @@ struct s3c_camif_plat_data {
int (*gpio_put)(void);
};
-/* Platform default helper functions */
-int s3c_camif_gpio_get(void);
-int s3c_camif_gpio_put(void);
-
#endif /* MEDIA_S3C_CAMIF_ */
diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h
index 3f7e56b..55b4cad 100644
--- a/include/net/netfilter/nf_tables.h
+++ b/include/net/netfilter/nf_tables.h
@@ -891,6 +891,12 @@ static inline struct nft_expr *nft_expr_last(const struct nft_rule *rule)
return (struct nft_expr *)&rule->data[rule->dlen];
}
+static inline bool nft_expr_more(const struct nft_rule *rule,
+ const struct nft_expr *expr)
+{
+ return expr != nft_expr_last(rule) && expr->ops;
+}
+
static inline struct nft_userdata *nft_userdata(const struct nft_rule *rule)
{
return (void *)&rule->data[rule->dlen];
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index e76bac4..69ade4f 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -165,7 +165,8 @@ extern void *scsi_kmap_atomic_sg(struct scatterlist *sg, int sg_count,
size_t *offset, size_t *len);
extern void scsi_kunmap_atomic_sg(void *virt);
-extern blk_status_t scsi_init_io(struct scsi_cmnd *cmd);
+blk_status_t scsi_alloc_sgtables(struct scsi_cmnd *cmd);
+void scsi_free_sgtables(struct scsi_cmnd *cmd);
#ifdef CONFIG_SCSI_DMA
extern int scsi_dma_map(struct scsi_cmnd *cmd);
diff --git a/include/soc/fsl/qman.h b/include/soc/fsl/qman.h
index cfe00e0..9f48411 100644
--- a/include/soc/fsl/qman.h
+++ b/include/soc/fsl/qman.h
@@ -256,7 +256,7 @@ struct qm_dqrr_entry {
__be32 context_b;
struct qm_fd fd;
u8 __reserved4[32];
-} __packed;
+} __packed __aligned(64);
#define QM_DQRR_VERB_VBIT 0x80
#define QM_DQRR_VERB_MASK 0x7f /* where the verb contains; */
#define QM_DQRR_VERB_FRAME_DEQUEUE 0x60 /* "this format" */
@@ -289,7 +289,7 @@ union qm_mr_entry {
__be32 tag;
struct qm_fd fd;
u8 __reserved1[32];
- } __packed ern;
+ } __packed __aligned(64) ern;
struct {
u8 verb;
u8 fqs; /* Frame Queue Status */
diff --git a/include/soc/tegra/fuse.h b/include/soc/tegra/fuse.h
index 1097fec..c702bd2 100644
--- a/include/soc/tegra/fuse.h
+++ b/include/soc/tegra/fuse.h
@@ -14,6 +14,7 @@
#define TEGRA210 0x21
#define TEGRA186 0x18
#define TEGRA194 0x19
+#define TEGRA234 0x23
#define TEGRA_FUSE_SKU_CALIB_0 0xf0
#define TEGRA30_FUSE_SATA_CALIB 0x124
@@ -23,6 +24,8 @@
u32 tegra_read_chipid(void);
u8 tegra_get_chip_id(void);
+u8 tegra_get_platform(void);
+bool tegra_is_silicon(void);
enum tegra_revision {
TEGRA_REVISION_UNKNOWN = 0,
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index bf5a99d..e6ceac3 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -3677,15 +3677,19 @@ union bpf_attr {
* Return
* The id is returned or 0 in case the id could not be retrieved.
*
- * long bpf_redirect_neigh(u32 ifindex, u64 flags)
+ * long bpf_redirect_neigh(u32 ifindex, struct bpf_redir_neigh *params, int plen, u64 flags)
* Description
* Redirect the packet to another net device of index *ifindex*
* and fill in L2 addresses from neighboring subsystem. This helper
* is somewhat similar to **bpf_redirect**\ (), except that it
* populates L2 addresses as well, meaning, internally, the helper
- * performs a FIB lookup based on the skb's networking header to
- * get the address of the next hop and then relies on the neighbor
- * lookup for the L2 address of the nexthop.
+ * relies on the neighbor lookup for the L2 address of the nexthop.
+ *
+ * The helper will perform a FIB lookup based on the skb's
+ * networking header to get the address of the next hop, unless
+ * this is supplied by the caller in the *params* argument. The
+ * *plen* argument indicates the len of *params* and should be set
+ * to 0 if *params* is NULL.
*
* The *flags* argument is reserved and must be 0. The helper is
* currently only supported for tc BPF program types, and enabled
@@ -4906,6 +4910,16 @@ struct bpf_fib_lookup {
__u8 dmac[6]; /* ETH_ALEN */
};
+struct bpf_redir_neigh {
+ /* network family for lookup (AF_INET, AF_INET6) */
+ __u32 nh_family;
+ /* network address of nexthop; skips fib lookup to find gateway */
+ union {
+ __be32 ipv4_nh;
+ __u32 ipv6_nh[4]; /* in6_addr; network order */
+ };
+};
+
enum bpf_task_fd_type {
BPF_FD_TYPE_RAW_TRACEPOINT, /* tp name */
BPF_FD_TYPE_TRACEPOINT, /* tp name */
diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
index 0c2e27d..ee93428 100644
--- a/include/uapi/linux/input-event-codes.h
+++ b/include/uapi/linux/input-event-codes.h
@@ -515,6 +515,9 @@
#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
#define KEY_IMAGES 0x1ba /* AL Image Browser */
+#define KEY_NOTIFICATION_CENTER 0x1bc /* Show/hide the notification center */
+#define KEY_PICKUP_PHONE 0x1bd /* Answer incoming call */
+#define KEY_HANGUP_PHONE 0x1be /* Decline incoming call */
#define KEY_DEL_EOL 0x1c0
#define KEY_DEL_EOS 0x1c1
@@ -542,6 +545,7 @@
#define KEY_FN_F 0x1e2
#define KEY_FN_S 0x1e3
#define KEY_FN_B 0x1e4
+#define KEY_FN_RIGHT_SHIFT 0x1e5
#define KEY_BRL_DOT1 0x1f1
#define KEY_BRL_DOT2 0x1f2
diff --git a/include/uapi/linux/mount.h b/include/uapi/linux/mount.h
index 96a0240..dd8306e 100644
--- a/include/uapi/linux/mount.h
+++ b/include/uapi/linux/mount.h
@@ -16,6 +16,7 @@
#define MS_REMOUNT 32 /* Alter flags of a mounted FS */
#define MS_MANDLOCK 64 /* Allow mandatory locks on an FS */
#define MS_DIRSYNC 128 /* Directory modifications are synchronous */
+#define MS_NOSYMFOLLOW 256 /* Do not follow symlinks */
#define MS_NOATIME 1024 /* Do not update access times. */
#define MS_NODIRATIME 2048 /* Do not update directory access times */
#define MS_BIND 4096
diff --git a/include/uapi/linux/tee.h b/include/uapi/linux/tee.h
index b619f37..d67cadf 100644
--- a/include/uapi/linux/tee.h
+++ b/include/uapi/linux/tee.h
@@ -51,6 +51,9 @@
#define TEE_GEN_CAP_GP (1 << 0)/* GlobalPlatform compliant TEE */
#define TEE_GEN_CAP_PRIVILEGED (1 << 1)/* Privileged device (for supplicant) */
#define TEE_GEN_CAP_REG_MEM (1 << 2)/* Supports registering shared memory */
+#define TEE_GEN_CAP_MEMREF_NULL (1 << 3)/* NULL MemRef support */
+
+#define TEE_MEMREF_NULL (__u64)(-1) /* NULL MemRef Buffer */
/*
* TEE Implementation ID
@@ -200,6 +203,16 @@ struct tee_ioctl_buf_data {
* a part of a shared memory by specifying an offset (@a) and size (@b) of
* the object. To supply the entire shared memory object set the offset
* (@a) to 0 and size (@b) to the previously returned size of the object.
+ *
+ * A client may need to present a NULL pointer in the argument
+ * passed to a trusted application in the TEE.
+ * This is also a requirement in GlobalPlatform Client API v1.0c
+ * (section 3.2.5 memory references), which can be found at
+ * http://www.globalplatform.org/specificationsdevice.asp
+ *
+ * If a NULL pointer is passed to a TA in the TEE, the (@c)
+ * IOCTL parameters value must be set to TEE_MEMREF_NULL indicating a NULL
+ * memory reference.
*/
struct tee_ioctl_param {
__u64 attr;
diff --git a/include/xen/events.h b/include/xen/events.h
index 3b8155c..8ec418e 100644
--- a/include/xen/events.h
+++ b/include/xen/events.h
@@ -35,16 +35,8 @@ int bind_ipi_to_irqhandler(enum ipi_vector ipi,
unsigned long irqflags,
const char *devname,
void *dev_id);
-int bind_interdomain_evtchn_to_irq(unsigned int remote_domain,
- evtchn_port_t remote_port);
int bind_interdomain_evtchn_to_irq_lateeoi(unsigned int remote_domain,
evtchn_port_t remote_port);
-int bind_interdomain_evtchn_to_irqhandler(unsigned int remote_domain,
- evtchn_port_t remote_port,
- irq_handler_t handler,
- unsigned long irqflags,
- const char *devname,
- void *dev_id);
int bind_interdomain_evtchn_to_irqhandler_lateeoi(unsigned int remote_domain,
evtchn_port_t remote_port,
irq_handler_t handler,
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 1110ecd..8f50c9c 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -2913,7 +2913,6 @@ attach_type_to_prog_type(enum bpf_attach_type attach_type)
case BPF_CGROUP_INET_INGRESS:
case BPF_CGROUP_INET_EGRESS:
return BPF_PROG_TYPE_CGROUP_SKB;
- break;
case BPF_CGROUP_INET_SOCK_CREATE:
case BPF_CGROUP_INET_SOCK_RELEASE:
case BPF_CGROUP_INET4_POST_BIND:
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 39d7f44..6200519 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -5133,24 +5133,19 @@ static int check_helper_call(struct bpf_verifier_env *env, int func_id, int insn
regs[BPF_REG_0].id = ++env->id_gen;
} else {
regs[BPF_REG_0].type = PTR_TO_MAP_VALUE_OR_NULL;
- regs[BPF_REG_0].id = ++env->id_gen;
}
} else if (fn->ret_type == RET_PTR_TO_SOCKET_OR_NULL) {
mark_reg_known_zero(env, regs, BPF_REG_0);
regs[BPF_REG_0].type = PTR_TO_SOCKET_OR_NULL;
- regs[BPF_REG_0].id = ++env->id_gen;
} else if (fn->ret_type == RET_PTR_TO_SOCK_COMMON_OR_NULL) {
mark_reg_known_zero(env, regs, BPF_REG_0);
regs[BPF_REG_0].type = PTR_TO_SOCK_COMMON_OR_NULL;
- regs[BPF_REG_0].id = ++env->id_gen;
} else if (fn->ret_type == RET_PTR_TO_TCP_SOCK_OR_NULL) {
mark_reg_known_zero(env, regs, BPF_REG_0);
regs[BPF_REG_0].type = PTR_TO_TCP_SOCK_OR_NULL;
- regs[BPF_REG_0].id = ++env->id_gen;
} else if (fn->ret_type == RET_PTR_TO_ALLOC_MEM_OR_NULL) {
mark_reg_known_zero(env, regs, BPF_REG_0);
regs[BPF_REG_0].type = PTR_TO_MEM_OR_NULL;
- regs[BPF_REG_0].id = ++env->id_gen;
regs[BPF_REG_0].mem_size = meta.mem_size;
} else if (fn->ret_type == RET_PTR_TO_MEM_OR_BTF_ID_OR_NULL ||
fn->ret_type == RET_PTR_TO_MEM_OR_BTF_ID) {
@@ -5199,6 +5194,9 @@ static int check_helper_call(struct bpf_verifier_env *env, int func_id, int insn
return -EINVAL;
}
+ if (reg_type_may_be_null(regs[BPF_REG_0].type))
+ regs[BPF_REG_0].id = ++env->id_gen;
+
if (is_ptr_cast_function(func_id)) {
/* For release_reference() */
regs[BPF_REG_0].ref_obj_id = meta.ref_obj_id;
@@ -7212,7 +7210,8 @@ static void mark_ptr_or_null_reg(struct bpf_func_state *state,
struct bpf_reg_state *reg, u32 id,
bool is_null)
{
- if (reg_type_may_be_null(reg->type) && reg->id == id) {
+ if (reg_type_may_be_null(reg->type) && reg->id == id &&
+ !WARN_ON_ONCE(!reg->id)) {
/* Old offset (both fixed and variable parts) should
* have been known-zero, because we don't allow pointer
* arithmetic on pointers that might be NULL.
diff --git a/kernel/capability.c b/kernel/capability.c
index 7c59b09..de7eac9 100644
--- a/kernel/capability.c
+++ b/kernel/capability.c
@@ -418,7 +418,7 @@ EXPORT_SYMBOL(ns_capable_noaudit);
/**
* ns_capable_setid - Determine if the current task has a superior capability
* in effect, while signalling that this check is being done from within a
- * setid syscall.
+ * setid or setgroups syscall.
* @ns: The usernamespace we want the capability in
* @cap: The capability to be tested for
*
diff --git a/kernel/dma/remap.c b/kernel/dma/remap.c
index 78b23f0..905c3fa 100644
--- a/kernel/dma/remap.c
+++ b/kernel/dma/remap.c
@@ -2,7 +2,7 @@
/*
* Copyright (c) 2014 The Linux Foundation
*/
-#include <linux/dma-mapping.h>
+#include <linux/dma-map-ops.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
diff --git a/kernel/groups.c b/kernel/groups.c
index 6ee6691..fe7e638 100644
--- a/kernel/groups.c
+++ b/kernel/groups.c
@@ -178,7 +178,7 @@ bool may_setgroups(void)
{
struct user_namespace *user_ns = current_user_ns();
- return ns_capable(user_ns, CAP_SETGID) &&
+ return ns_capable_setid(user_ns, CAP_SETGID) &&
userns_may_setgroups(user_ns);
}
diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
index 5ae7b4e..e254745 100644
--- a/kernel/sched/cpufreq_schedutil.c
+++ b/kernel/sched/cpufreq_schedutil.c
@@ -441,6 +441,7 @@ static void sugov_update_single(struct update_util_data *hook, u64 time,
unsigned long util, max;
unsigned int next_f;
bool busy;
+ unsigned int cached_freq = sg_policy->cached_raw_freq;
sugov_iowait_boost(sg_cpu, time, flags);
sg_cpu->last_update = time;
@@ -464,8 +465,8 @@ static void sugov_update_single(struct update_util_data *hook, u64 time,
if (busy && next_f < sg_policy->next_freq) {
next_f = sg_policy->next_freq;
- /* Reset cached freq as next_freq has changed */
- sg_policy->cached_raw_freq = 0;
+ /* Restore cached freq as next_freq has changed */
+ sg_policy->cached_raw_freq = cached_freq;
}
/*
diff --git a/kernel/sys.c b/kernel/sys.c
index 6401880..84594bc 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -373,7 +373,7 @@ long __sys_setregid(gid_t rgid, gid_t egid)
if (rgid != (gid_t) -1) {
if (gid_eq(old->gid, krgid) ||
gid_eq(old->egid, krgid) ||
- ns_capable(old->user_ns, CAP_SETGID))
+ ns_capable_setid(old->user_ns, CAP_SETGID))
new->gid = krgid;
else
goto error;
@@ -382,7 +382,7 @@ long __sys_setregid(gid_t rgid, gid_t egid)
if (gid_eq(old->gid, kegid) ||
gid_eq(old->egid, kegid) ||
gid_eq(old->sgid, kegid) ||
- ns_capable(old->user_ns, CAP_SETGID))
+ ns_capable_setid(old->user_ns, CAP_SETGID))
new->egid = kegid;
else
goto error;
@@ -432,7 +432,7 @@ long __sys_setgid(gid_t gid)
old = current_cred();
retval = -EPERM;
- if (ns_capable(old->user_ns, CAP_SETGID))
+ if (ns_capable_setid(old->user_ns, CAP_SETGID))
new->gid = new->egid = new->sgid = new->fsgid = kgid;
else if (gid_eq(kgid, old->gid) || gid_eq(kgid, old->sgid))
new->egid = new->fsgid = kgid;
@@ -744,7 +744,7 @@ long __sys_setresgid(gid_t rgid, gid_t egid, gid_t sgid)
old = current_cred();
retval = -EPERM;
- if (!ns_capable(old->user_ns, CAP_SETGID)) {
+ if (!ns_capable_setid(old->user_ns, CAP_SETGID)) {
if (rgid != (gid_t) -1 && !gid_eq(krgid, old->gid) &&
!gid_eq(krgid, old->egid) && !gid_eq(krgid, old->sgid))
goto error;
@@ -871,7 +871,7 @@ long __sys_setfsgid(gid_t gid)
if (gid_eq(kgid, old->gid) || gid_eq(kgid, old->egid) ||
gid_eq(kgid, old->sgid) || gid_eq(kgid, old->fsgid) ||
- ns_capable(old->user_ns, CAP_SETGID)) {
+ ns_capable_setid(old->user_ns, CAP_SETGID)) {
if (!gid_eq(kgid, old->fsgid)) {
new->fsgid = kgid;
if (security_task_fix_setgid(new,old,LSM_SETID_FS) == 0)
diff --git a/kernel/time/timer.c b/kernel/time/timer.c
index dda05f4..de37e33 100644
--- a/kernel/time/timer.c
+++ b/kernel/time/timer.c
@@ -1706,6 +1706,8 @@ void update_process_times(int user_tick)
{
struct task_struct *p = current;
+ PRANDOM_ADD_NOISE(jiffies, user_tick, p, 0);
+
/* Note: this timer irq context must be accounted for as well. */
account_process_tick(p, user_tick);
run_local_timers();
@@ -1717,13 +1719,6 @@ void update_process_times(int user_tick)
scheduler_tick();
if (IS_ENABLED(CONFIG_POSIX_TIMERS))
run_posix_cpu_timers();
-
- /* The current CPU might make use of net randoms without receiving IRQs
- * to renew them often enough. Let's update the net_rand_state from a
- * non-constant value that's not affine to the number of calls to make
- * sure it's updated when there's some activity (we don't care in idle).
- */
- this_cpu_add(net_rand_state.s1, rol32(jiffies, 24) + user_tick);
}
/**
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 15bf28b..7f45fd9 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -793,7 +793,7 @@ static void rb_wake_up_waiters(struct irq_work *work)
* ring_buffer_wait - wait for input to the ring buffer
* @buffer: buffer to wait on
* @cpu: the cpu buffer to wait on
- * @full: wait until a full page is available, if @cpu != RING_BUFFER_ALL_CPUS
+ * @full: wait until the percentage of pages are available, if @cpu != RING_BUFFER_ALL_CPUS
*
* If @cpu == RING_BUFFER_ALL_CPUS then the task will wake up as soon
* as data is added to any of the @buffer's cpu buffers. Otherwise
@@ -1952,18 +1952,18 @@ int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size,
{
struct ring_buffer_per_cpu *cpu_buffer;
unsigned long nr_pages;
- int cpu, err = 0;
+ int cpu, err;
/*
* Always succeed at resizing a non-existent buffer:
*/
if (!buffer)
- return size;
+ return 0;
/* Make sure the requested buffer exists */
if (cpu_id != RING_BUFFER_ALL_CPUS &&
!cpumask_test_cpu(cpu_id, buffer->cpumask))
- return size;
+ return 0;
nr_pages = DIV_ROUND_UP(size, BUF_PAGE_SIZE);
@@ -2119,7 +2119,7 @@ int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size,
}
mutex_unlock(&buffer->mutex);
- return size;
+ return 0;
out_err:
for_each_buffer_cpu(buffer, cpu) {
diff --git a/lib/fonts/font_6x8.c b/lib/fonts/font_6x8.c
index e064477..700039a9 100644
--- a/lib/fonts/font_6x8.c
+++ b/lib/fonts/font_6x8.c
@@ -3,8 +3,8 @@
#define FONTDATAMAX 2048
-static const unsigned char fontdata_6x8[FONTDATAMAX] = {
-
+static struct font_data fontdata_6x8 = {
+ { 0, 0, FONTDATAMAX, 0 }, {
/* 0 0x00 '^@' */
0x00, /* 000000 */
0x00, /* 000000 */
@@ -2564,13 +2564,13 @@ static const unsigned char fontdata_6x8[FONTDATAMAX] = {
0x00, /* 000000 */
0x00, /* 000000 */
0x00, /* 000000 */
-};
+} };
const struct font_desc font_6x8 = {
.idx = FONT6x8_IDX,
.name = "6x8",
.width = 6,
.height = 8,
- .data = fontdata_6x8,
+ .data = fontdata_6x8.data,
.pref = 0,
};
diff --git a/lib/random32.c b/lib/random32.c
index dfb9981..4d0e05e4 100644
--- a/lib/random32.c
+++ b/lib/random32.c
@@ -38,19 +38,10 @@
#include <linux/jiffies.h>
#include <linux/random.h>
#include <linux/sched.h>
+#include <linux/bitops.h>
#include <asm/unaligned.h>
#include <trace/events/random.h>
-#ifdef CONFIG_RANDOM32_SELFTEST
-static void __init prandom_state_selftest(void);
-#else
-static inline void prandom_state_selftest(void)
-{
-}
-#endif
-
-DEFINE_PER_CPU(struct rnd_state, net_rand_state) __latent_entropy;
-
/**
* prandom_u32_state - seeded pseudo-random number generator.
* @state: pointer to state structure holding seeded state.
@@ -71,26 +62,6 @@ u32 prandom_u32_state(struct rnd_state *state)
EXPORT_SYMBOL(prandom_u32_state);
/**
- * prandom_u32 - pseudo random number generator
- *
- * A 32 bit pseudo-random number is generated using a fast
- * algorithm suitable for simulation. This algorithm is NOT
- * considered safe for cryptographic use.
- */
-u32 prandom_u32(void)
-{
- struct rnd_state *state = &get_cpu_var(net_rand_state);
- u32 res;
-
- res = prandom_u32_state(state);
- trace_prandom_u32(res);
- put_cpu_var(net_rand_state);
-
- return res;
-}
-EXPORT_SYMBOL(prandom_u32);
-
-/**
* prandom_bytes_state - get the requested number of pseudo-random bytes
*
* @state: pointer to state structure holding seeded state.
@@ -121,20 +92,6 @@ void prandom_bytes_state(struct rnd_state *state, void *buf, size_t bytes)
}
EXPORT_SYMBOL(prandom_bytes_state);
-/**
- * prandom_bytes - get the requested number of pseudo-random bytes
- * @buf: where to copy the pseudo-random bytes to
- * @bytes: the requested number of bytes
- */
-void prandom_bytes(void *buf, size_t bytes)
-{
- struct rnd_state *state = &get_cpu_var(net_rand_state);
-
- prandom_bytes_state(state, buf, bytes);
- put_cpu_var(net_rand_state);
-}
-EXPORT_SYMBOL(prandom_bytes);
-
static void prandom_warmup(struct rnd_state *state)
{
/* Calling RNG ten times to satisfy recurrence condition */
@@ -150,96 +107,6 @@ static void prandom_warmup(struct rnd_state *state)
prandom_u32_state(state);
}
-static u32 __extract_hwseed(void)
-{
- unsigned int val = 0;
-
- (void)(arch_get_random_seed_int(&val) ||
- arch_get_random_int(&val));
-
- return val;
-}
-
-static void prandom_seed_early(struct rnd_state *state, u32 seed,
- bool mix_with_hwseed)
-{
-#define LCG(x) ((x) * 69069U) /* super-duper LCG */
-#define HWSEED() (mix_with_hwseed ? __extract_hwseed() : 0)
- state->s1 = __seed(HWSEED() ^ LCG(seed), 2U);
- state->s2 = __seed(HWSEED() ^ LCG(state->s1), 8U);
- state->s3 = __seed(HWSEED() ^ LCG(state->s2), 16U);
- state->s4 = __seed(HWSEED() ^ LCG(state->s3), 128U);
-}
-
-/**
- * prandom_seed - add entropy to pseudo random number generator
- * @entropy: entropy value
- *
- * Add some additional entropy to the prandom pool.
- */
-void prandom_seed(u32 entropy)
-{
- int i;
- /*
- * No locking on the CPUs, but then somewhat random results are, well,
- * expected.
- */
- for_each_possible_cpu(i) {
- struct rnd_state *state = &per_cpu(net_rand_state, i);
-
- state->s1 = __seed(state->s1 ^ entropy, 2U);
- prandom_warmup(state);
- }
-}
-EXPORT_SYMBOL(prandom_seed);
-
-/*
- * Generate some initially weak seeding values to allow
- * to start the prandom_u32() engine.
- */
-static int __init prandom_init(void)
-{
- int i;
-
- prandom_state_selftest();
-
- for_each_possible_cpu(i) {
- struct rnd_state *state = &per_cpu(net_rand_state, i);
- u32 weak_seed = (i + jiffies) ^ random_get_entropy();
-
- prandom_seed_early(state, weak_seed, true);
- prandom_warmup(state);
- }
-
- return 0;
-}
-core_initcall(prandom_init);
-
-static void __prandom_timer(struct timer_list *unused);
-
-static DEFINE_TIMER(seed_timer, __prandom_timer);
-
-static void __prandom_timer(struct timer_list *unused)
-{
- u32 entropy;
- unsigned long expires;
-
- get_random_bytes(&entropy, sizeof(entropy));
- prandom_seed(entropy);
-
- /* reseed every ~60 seconds, in [40 .. 80) interval with slack */
- expires = 40 + prandom_u32_max(40);
- seed_timer.expires = jiffies + msecs_to_jiffies(expires * MSEC_PER_SEC);
-
- add_timer(&seed_timer);
-}
-
-static void __init __prandom_start_seed_timer(void)
-{
- seed_timer.expires = jiffies + msecs_to_jiffies(40 * MSEC_PER_SEC);
- add_timer(&seed_timer);
-}
-
void prandom_seed_full_state(struct rnd_state __percpu *pcpu_state)
{
int i;
@@ -259,51 +126,6 @@ void prandom_seed_full_state(struct rnd_state __percpu *pcpu_state)
}
EXPORT_SYMBOL(prandom_seed_full_state);
-/*
- * Generate better values after random number generator
- * is fully initialized.
- */
-static void __prandom_reseed(bool late)
-{
- unsigned long flags;
- static bool latch = false;
- static DEFINE_SPINLOCK(lock);
-
- /* Asking for random bytes might result in bytes getting
- * moved into the nonblocking pool and thus marking it
- * as initialized. In this case we would double back into
- * this function and attempt to do a late reseed.
- * Ignore the pointless attempt to reseed again if we're
- * already waiting for bytes when the nonblocking pool
- * got initialized.
- */
-
- /* only allow initial seeding (late == false) once */
- if (!spin_trylock_irqsave(&lock, flags))
- return;
-
- if (latch && !late)
- goto out;
-
- latch = true;
- prandom_seed_full_state(&net_rand_state);
-out:
- spin_unlock_irqrestore(&lock, flags);
-}
-
-void prandom_reseed_late(void)
-{
- __prandom_reseed(true);
-}
-
-static int __init prandom_reseed(void)
-{
- __prandom_reseed(false);
- __prandom_start_seed_timer();
- return 0;
-}
-late_initcall(prandom_reseed);
-
#ifdef CONFIG_RANDOM32_SELFTEST
static struct prandom_test1 {
u32 seed;
@@ -423,7 +245,28 @@ static struct prandom_test2 {
{ 407983964U, 921U, 728767059U },
};
-static void __init prandom_state_selftest(void)
+static u32 __extract_hwseed(void)
+{
+ unsigned int val = 0;
+
+ (void)(arch_get_random_seed_int(&val) ||
+ arch_get_random_int(&val));
+
+ return val;
+}
+
+static void prandom_seed_early(struct rnd_state *state, u32 seed,
+ bool mix_with_hwseed)
+{
+#define LCG(x) ((x) * 69069U) /* super-duper LCG */
+#define HWSEED() (mix_with_hwseed ? __extract_hwseed() : 0)
+ state->s1 = __seed(HWSEED() ^ LCG(seed), 2U);
+ state->s2 = __seed(HWSEED() ^ LCG(state->s1), 8U);
+ state->s3 = __seed(HWSEED() ^ LCG(state->s2), 16U);
+ state->s4 = __seed(HWSEED() ^ LCG(state->s3), 128U);
+}
+
+static int __init prandom_state_selftest(void)
{
int i, j, errors = 0, runs = 0;
bool error = false;
@@ -463,5 +306,327 @@ static void __init prandom_state_selftest(void)
pr_warn("prandom: %d/%d self tests failed\n", errors, runs);
else
pr_info("prandom: %d self tests passed\n", runs);
+ return 0;
}
+core_initcall(prandom_state_selftest);
#endif
+
+/*
+ * The prandom_u32() implementation is now completely separate from the
+ * prandom_state() functions, which are retained (for now) for compatibility.
+ *
+ * Because of (ab)use in the networking code for choosing random TCP/UDP port
+ * numbers, which open DoS possibilities if guessable, we want something
+ * stronger than a standard PRNG. But the performance requirements of
+ * the network code do not allow robust crypto for this application.
+ *
+ * So this is a homebrew Junior Spaceman implementation, based on the
+ * lowest-latency trustworthy crypto primitive available, SipHash.
+ * (The authors of SipHash have not been consulted about this abuse of
+ * their work.)
+ *
+ * Standard SipHash-2-4 uses 2n+4 rounds to hash n words of input to
+ * one word of output. This abbreviated version uses 2 rounds per word
+ * of output.
+ */
+
+struct siprand_state {
+ unsigned long v0;
+ unsigned long v1;
+ unsigned long v2;
+ unsigned long v3;
+};
+
+static DEFINE_PER_CPU(struct siprand_state, net_rand_state) __latent_entropy;
+DEFINE_PER_CPU(unsigned long, net_rand_noise);
+EXPORT_PER_CPU_SYMBOL(net_rand_noise);
+
+/*
+ * This is the core CPRNG function. As "pseudorandom", this is not used
+ * for truly valuable things, just intended to be a PITA to guess.
+ * For maximum speed, we do just two SipHash rounds per word. This is
+ * the same rate as 4 rounds per 64 bits that SipHash normally uses,
+ * so hopefully it's reasonably secure.
+ *
+ * There are two changes from the official SipHash finalization:
+ * - We omit some constants XORed with v2 in the SipHash spec as irrelevant;
+ * they are there only to make the output rounds distinct from the input
+ * rounds, and this application has no input rounds.
+ * - Rather than returning v0^v1^v2^v3, return v1+v3.
+ * If you look at the SipHash round, the last operation on v3 is
+ * "v3 ^= v0", so "v0 ^ v3" just undoes that, a waste of time.
+ * Likewise "v1 ^= v2". (The rotate of v2 makes a difference, but
+ * it still cancels out half of the bits in v2 for no benefit.)
+ * Second, since the last combining operation was xor, continue the
+ * pattern of alternating xor/add for a tiny bit of extra non-linearity.
+ */
+static inline u32 siprand_u32(struct siprand_state *s)
+{
+ unsigned long v0 = s->v0, v1 = s->v1, v2 = s->v2, v3 = s->v3;
+ unsigned long n = raw_cpu_read(net_rand_noise);
+
+ v3 ^= n;
+ PRND_SIPROUND(v0, v1, v2, v3);
+ PRND_SIPROUND(v0, v1, v2, v3);
+ v0 ^= n;
+ s->v0 = v0; s->v1 = v1; s->v2 = v2; s->v3 = v3;
+ return v1 + v3;
+}
+
+
+/**
+ * prandom_u32 - pseudo random number generator
+ *
+ * A 32 bit pseudo-random number is generated using a fast
+ * algorithm suitable for simulation. This algorithm is NOT
+ * considered safe for cryptographic use.
+ */
+u32 prandom_u32(void)
+{
+ struct siprand_state *state = get_cpu_ptr(&net_rand_state);
+ u32 res = siprand_u32(state);
+
+ trace_prandom_u32(res);
+ put_cpu_ptr(&net_rand_state);
+ return res;
+}
+EXPORT_SYMBOL(prandom_u32);
+
+/**
+ * prandom_bytes - get the requested number of pseudo-random bytes
+ * @buf: where to copy the pseudo-random bytes to
+ * @bytes: the requested number of bytes
+ */
+void prandom_bytes(void *buf, size_t bytes)
+{
+ struct siprand_state *state = get_cpu_ptr(&net_rand_state);
+ u8 *ptr = buf;
+
+ while (bytes >= sizeof(u32)) {
+ put_unaligned(siprand_u32(state), (u32 *)ptr);
+ ptr += sizeof(u32);
+ bytes -= sizeof(u32);
+ }
+
+ if (bytes > 0) {
+ u32 rem = siprand_u32(state);
+
+ do {
+ *ptr++ = (u8)rem;
+ rem >>= BITS_PER_BYTE;
+ } while (--bytes > 0);
+ }
+ put_cpu_ptr(&net_rand_state);
+}
+EXPORT_SYMBOL(prandom_bytes);
+
+/**
+ * prandom_seed - add entropy to pseudo random number generator
+ * @entropy: entropy value
+ *
+ * Add some additional seed material to the prandom pool.
+ * The "entropy" is actually our IP address (the only caller is
+ * the network code), not for unpredictability, but to ensure that
+ * different machines are initialized differently.
+ */
+void prandom_seed(u32 entropy)
+{
+ int i;
+
+ add_device_randomness(&entropy, sizeof(entropy));
+
+ for_each_possible_cpu(i) {
+ struct siprand_state *state = per_cpu_ptr(&net_rand_state, i);
+ unsigned long v0 = state->v0, v1 = state->v1;
+ unsigned long v2 = state->v2, v3 = state->v3;
+
+ do {
+ v3 ^= entropy;
+ PRND_SIPROUND(v0, v1, v2, v3);
+ PRND_SIPROUND(v0, v1, v2, v3);
+ v0 ^= entropy;
+ } while (unlikely(!v0 || !v1 || !v2 || !v3));
+
+ WRITE_ONCE(state->v0, v0);
+ WRITE_ONCE(state->v1, v1);
+ WRITE_ONCE(state->v2, v2);
+ WRITE_ONCE(state->v3, v3);
+ }
+}
+EXPORT_SYMBOL(prandom_seed);
+
+/*
+ * Generate some initially weak seeding values to allow
+ * the prandom_u32() engine to be started.
+ */
+static int __init prandom_init_early(void)
+{
+ int i;
+ unsigned long v0, v1, v2, v3;
+
+ if (!arch_get_random_long(&v0))
+ v0 = jiffies;
+ if (!arch_get_random_long(&v1))
+ v1 = random_get_entropy();
+ v2 = v0 ^ PRND_K0;
+ v3 = v1 ^ PRND_K1;
+
+ for_each_possible_cpu(i) {
+ struct siprand_state *state;
+
+ v3 ^= i;
+ PRND_SIPROUND(v0, v1, v2, v3);
+ PRND_SIPROUND(v0, v1, v2, v3);
+ v0 ^= i;
+
+ state = per_cpu_ptr(&net_rand_state, i);
+ state->v0 = v0; state->v1 = v1;
+ state->v2 = v2; state->v3 = v3;
+ }
+
+ return 0;
+}
+core_initcall(prandom_init_early);
+
+
+/* Stronger reseeding when available, and periodically thereafter. */
+static void prandom_reseed(struct timer_list *unused);
+
+static DEFINE_TIMER(seed_timer, prandom_reseed);
+
+static void prandom_reseed(struct timer_list *unused)
+{
+ unsigned long expires;
+ int i;
+
+ /*
+ * Reinitialize each CPU's PRNG with 128 bits of key.
+ * No locking on the CPUs, but then somewhat random results are,
+ * well, expected.
+ */
+ for_each_possible_cpu(i) {
+ struct siprand_state *state;
+ unsigned long v0 = get_random_long(), v2 = v0 ^ PRND_K0;
+ unsigned long v1 = get_random_long(), v3 = v1 ^ PRND_K1;
+#if BITS_PER_LONG == 32
+ int j;
+
+ /*
+ * On 32-bit machines, hash in two extra words to
+ * approximate 128-bit key length. Not that the hash
+ * has that much security, but this prevents a trivial
+ * 64-bit brute force.
+ */
+ for (j = 0; j < 2; j++) {
+ unsigned long m = get_random_long();
+
+ v3 ^= m;
+ PRND_SIPROUND(v0, v1, v2, v3);
+ PRND_SIPROUND(v0, v1, v2, v3);
+ v0 ^= m;
+ }
+#endif
+ /*
+ * Probably impossible in practice, but there is a
+ * theoretical risk that a race between this reseeding
+ * and the target CPU writing its state back could
+ * create the all-zero SipHash fixed point.
+ *
+ * To ensure that never happens, ensure the state
+ * we write contains no zero words.
+ */
+ state = per_cpu_ptr(&net_rand_state, i);
+ WRITE_ONCE(state->v0, v0 ? v0 : -1ul);
+ WRITE_ONCE(state->v1, v1 ? v1 : -1ul);
+ WRITE_ONCE(state->v2, v2 ? v2 : -1ul);
+ WRITE_ONCE(state->v3, v3 ? v3 : -1ul);
+ }
+
+ /* reseed every ~60 seconds, in [40 .. 80) interval with slack */
+ expires = round_jiffies(jiffies + 40 * HZ + prandom_u32_max(40 * HZ));
+ mod_timer(&seed_timer, expires);
+}
+
+/*
+ * The random ready callback can be called from almost any interrupt.
+ * To avoid worrying about whether it's safe to delay that interrupt
+ * long enough to seed all CPUs, just schedule an immediate timer event.
+ */
+static void prandom_timer_start(struct random_ready_callback *unused)
+{
+ mod_timer(&seed_timer, jiffies);
+}
+
+#ifdef CONFIG_RANDOM32_SELFTEST
+/* Principle: True 32-bit random numbers will all have 16 differing bits on
+ * average. For each 32-bit number, there are 601M numbers differing by 16
+ * bits, and 89% of the numbers differ by at least 12 bits. Note that more
+ * than 16 differing bits also implies a correlation with inverted bits. Thus
+ * we take 1024 random numbers and compare each of them to the other ones,
+ * counting the deviation of correlated bits to 16. Constants report 32,
+ * counters 32-log2(TEST_SIZE), and pure randoms, around 6 or lower. With the
+ * u32 total, TEST_SIZE may be as large as 4096 samples.
+ */
+#define TEST_SIZE 1024
+static int __init prandom32_state_selftest(void)
+{
+ unsigned int x, y, bits, samples;
+ u32 xor, flip;
+ u32 total;
+ u32 *data;
+
+ data = kmalloc(sizeof(*data) * TEST_SIZE, GFP_KERNEL);
+ if (!data)
+ return 0;
+
+ for (samples = 0; samples < TEST_SIZE; samples++)
+ data[samples] = prandom_u32();
+
+ flip = total = 0;
+ for (x = 0; x < samples; x++) {
+ for (y = 0; y < samples; y++) {
+ if (x == y)
+ continue;
+ xor = data[x] ^ data[y];
+ flip |= xor;
+ bits = hweight32(xor);
+ total += (bits - 16) * (bits - 16);
+ }
+ }
+
+ /* We'll return the average deviation as 2*sqrt(corr/samples), which
+ * is also sqrt(4*corr/samples) which provides a better resolution.
+ */
+ bits = int_sqrt(total / (samples * (samples - 1)) * 4);
+ if (bits > 6)
+ pr_warn("prandom32: self test failed (at least %u bits"
+ " correlated, fixed_mask=%#x fixed_value=%#x\n",
+ bits, ~flip, data[0] & ~flip);
+ else
+ pr_info("prandom32: self test passed (less than %u bits"
+ " correlated)\n",
+ bits+1);
+ kfree(data);
+ return 0;
+}
+core_initcall(prandom32_state_selftest);
+#endif /* CONFIG_RANDOM32_SELFTEST */
+
+/*
+ * Start periodic full reseeding as soon as strong
+ * random numbers are available.
+ */
+static int __init prandom_init_late(void)
+{
+ static struct random_ready_callback random_ready = {
+ .func = prandom_timer_start
+ };
+ int ret = add_random_ready_callback(&random_ready);
+
+ if (ret == -EALREADY) {
+ prandom_timer_start(&random_ready);
+ ret = 0;
+ }
+ return ret;
+}
+late_initcall(prandom_init_late);
diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index 9a4992d..0a482ef 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -595,7 +595,7 @@ struct scatterlist *sgl_alloc_order(unsigned long long length,
elem_len = min_t(u64, length, PAGE_SIZE << order);
page = alloc_pages(gfp, order);
if (!page) {
- sgl_free(sgl);
+ sgl_free_order(sgl, order);
return NULL;
}
diff --git a/net/bridge/netfilter/ebt_dnat.c b/net/bridge/netfilter/ebt_dnat.c
index 12a4f4d..3fda71a 100644
--- a/net/bridge/netfilter/ebt_dnat.c
+++ b/net/bridge/netfilter/ebt_dnat.c
@@ -21,7 +21,7 @@ ebt_dnat_tg(struct sk_buff *skb, const struct xt_action_param *par)
{
const struct ebt_nat_info *info = par->targinfo;
- if (skb_ensure_writable(skb, ETH_ALEN))
+ if (skb_ensure_writable(skb, 0))
return EBT_DROP;
ether_addr_copy(eth_hdr(skb)->h_dest, info->mac);
diff --git a/net/bridge/netfilter/ebt_redirect.c b/net/bridge/netfilter/ebt_redirect.c
index 0cad62a..3077905 100644
--- a/net/bridge/netfilter/ebt_redirect.c
+++ b/net/bridge/netfilter/ebt_redirect.c
@@ -21,7 +21,7 @@ ebt_redirect_tg(struct sk_buff *skb, const struct xt_action_param *par)
{
const struct ebt_redirect_info *info = par->targinfo;
- if (skb_ensure_writable(skb, ETH_ALEN))
+ if (skb_ensure_writable(skb, 0))
return EBT_DROP;
if (xt_hooknum(par) != NF_BR_BROUTING)
diff --git a/net/bridge/netfilter/ebt_snat.c b/net/bridge/netfilter/ebt_snat.c
index 27443bf..7dfbcdf 100644
--- a/net/bridge/netfilter/ebt_snat.c
+++ b/net/bridge/netfilter/ebt_snat.c
@@ -22,7 +22,7 @@ ebt_snat_tg(struct sk_buff *skb, const struct xt_action_param *par)
{
const struct ebt_nat_info *info = par->targinfo;
- if (skb_ensure_writable(skb, ETH_ALEN * 2))
+ if (skb_ensure_writable(skb, 0))
return EBT_DROP;
ether_addr_copy(eth_hdr(skb)->h_source, info->mac);
diff --git a/net/core/dev.c b/net/core/dev.c
index 751e526..82dc6b4 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -145,6 +145,7 @@
#include <linux/indirect_call_wrapper.h>
#include <net/devlink.h>
#include <linux/pm_runtime.h>
+#include <linux/prandom.h>
#include "net-sysfs.h"
@@ -3558,6 +3559,7 @@ static int xmit_one(struct sk_buff *skb, struct net_device *dev,
dev_queue_xmit_nit(skb, dev);
len = skb->len;
+ PRANDOM_ADD_NOISE(skb, dev, txq, len + jiffies);
trace_net_dev_start_xmit(skb, dev);
rc = netdev_start_xmit(skb, dev, txq, more);
trace_net_dev_xmit(skb, rc, dev, len);
@@ -4130,6 +4132,7 @@ static int __dev_queue_xmit(struct sk_buff *skb, struct net_device *sb_dev)
if (!skb)
goto out;
+ PRANDOM_ADD_NOISE(skb, dev, txq, jiffies);
HARD_TX_LOCK(dev, txq, cpu);
if (!netif_xmit_stopped(txq)) {
@@ -4195,6 +4198,7 @@ int dev_direct_xmit(struct sk_buff *skb, u16 queue_id)
skb_set_queue_mapping(skb, queue_id);
txq = skb_get_tx_queue(dev, skb);
+ PRANDOM_ADD_NOISE(skb, dev, txq, jiffies);
local_bh_disable();
@@ -10213,7 +10217,7 @@ void netdev_run_todo(void)
struct net_device *dev = list_first_entry(&unlink_list,
struct net_device,
unlink_list);
- list_del(&dev->unlink_list);
+ list_del_init(&dev->unlink_list);
dev->nested_level = dev->lower_level - 1;
}
#endif
diff --git a/net/core/filter.c b/net/core/filter.c
index c5e2a1c..2ca5eec 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -2165,12 +2165,12 @@ static int __bpf_redirect(struct sk_buff *skb, struct net_device *dev,
}
#if IS_ENABLED(CONFIG_IPV6)
-static int bpf_out_neigh_v6(struct net *net, struct sk_buff *skb)
+static int bpf_out_neigh_v6(struct net *net, struct sk_buff *skb,
+ struct net_device *dev, struct bpf_nh_params *nh)
{
- struct dst_entry *dst = skb_dst(skb);
- struct net_device *dev = dst->dev;
u32 hh_len = LL_RESERVED_SPACE(dev);
const struct in6_addr *nexthop;
+ struct dst_entry *dst = NULL;
struct neighbour *neigh;
if (dev_xmit_recursion()) {
@@ -2196,8 +2196,13 @@ static int bpf_out_neigh_v6(struct net *net, struct sk_buff *skb)
}
rcu_read_lock_bh();
- nexthop = rt6_nexthop(container_of(dst, struct rt6_info, dst),
- &ipv6_hdr(skb)->daddr);
+ if (!nh) {
+ dst = skb_dst(skb);
+ nexthop = rt6_nexthop(container_of(dst, struct rt6_info, dst),
+ &ipv6_hdr(skb)->daddr);
+ } else {
+ nexthop = &nh->ipv6_nh;
+ }
neigh = ip_neigh_gw6(dev, nexthop);
if (likely(!IS_ERR(neigh))) {
int ret;
@@ -2210,36 +2215,43 @@ static int bpf_out_neigh_v6(struct net *net, struct sk_buff *skb)
return ret;
}
rcu_read_unlock_bh();
- IP6_INC_STATS(dev_net(dst->dev),
- ip6_dst_idev(dst), IPSTATS_MIB_OUTNOROUTES);
+ if (dst)
+ IP6_INC_STATS(dev_net(dst->dev),
+ ip6_dst_idev(dst), IPSTATS_MIB_OUTNOROUTES);
out_drop:
kfree_skb(skb);
return -ENETDOWN;
}
-static int __bpf_redirect_neigh_v6(struct sk_buff *skb, struct net_device *dev)
+static int __bpf_redirect_neigh_v6(struct sk_buff *skb, struct net_device *dev,
+ struct bpf_nh_params *nh)
{
const struct ipv6hdr *ip6h = ipv6_hdr(skb);
struct net *net = dev_net(dev);
int err, ret = NET_XMIT_DROP;
- struct dst_entry *dst;
- struct flowi6 fl6 = {
- .flowi6_flags = FLOWI_FLAG_ANYSRC,
- .flowi6_mark = skb->mark,
- .flowlabel = ip6_flowinfo(ip6h),
- .flowi6_oif = dev->ifindex,
- .flowi6_proto = ip6h->nexthdr,
- .daddr = ip6h->daddr,
- .saddr = ip6h->saddr,
- };
- dst = ipv6_stub->ipv6_dst_lookup_flow(net, NULL, &fl6, NULL);
- if (IS_ERR(dst))
+ if (!nh) {
+ struct dst_entry *dst;
+ struct flowi6 fl6 = {
+ .flowi6_flags = FLOWI_FLAG_ANYSRC,
+ .flowi6_mark = skb->mark,
+ .flowlabel = ip6_flowinfo(ip6h),
+ .flowi6_oif = dev->ifindex,
+ .flowi6_proto = ip6h->nexthdr,
+ .daddr = ip6h->daddr,
+ .saddr = ip6h->saddr,
+ };
+
+ dst = ipv6_stub->ipv6_dst_lookup_flow(net, NULL, &fl6, NULL);
+ if (IS_ERR(dst))
+ goto out_drop;
+
+ skb_dst_set(skb, dst);
+ } else if (nh->nh_family != AF_INET6) {
goto out_drop;
+ }
- skb_dst_set(skb, dst);
-
- err = bpf_out_neigh_v6(net, skb);
+ err = bpf_out_neigh_v6(net, skb, dev, nh);
if (unlikely(net_xmit_eval(err)))
dev->stats.tx_errors++;
else
@@ -2252,7 +2264,8 @@ static int __bpf_redirect_neigh_v6(struct sk_buff *skb, struct net_device *dev)
return ret;
}
#else
-static int __bpf_redirect_neigh_v6(struct sk_buff *skb, struct net_device *dev)
+static int __bpf_redirect_neigh_v6(struct sk_buff *skb, struct net_device *dev,
+ struct bpf_nh_params *nh)
{
kfree_skb(skb);
return NET_XMIT_DROP;
@@ -2260,11 +2273,9 @@ static int __bpf_redirect_neigh_v6(struct sk_buff *skb, struct net_device *dev)
#endif /* CONFIG_IPV6 */
#if IS_ENABLED(CONFIG_INET)
-static int bpf_out_neigh_v4(struct net *net, struct sk_buff *skb)
+static int bpf_out_neigh_v4(struct net *net, struct sk_buff *skb,
+ struct net_device *dev, struct bpf_nh_params *nh)
{
- struct dst_entry *dst = skb_dst(skb);
- struct rtable *rt = container_of(dst, struct rtable, dst);
- struct net_device *dev = dst->dev;
u32 hh_len = LL_RESERVED_SPACE(dev);
struct neighbour *neigh;
bool is_v6gw = false;
@@ -2292,7 +2303,21 @@ static int bpf_out_neigh_v4(struct net *net, struct sk_buff *skb)
}
rcu_read_lock_bh();
- neigh = ip_neigh_for_gw(rt, skb, &is_v6gw);
+ if (!nh) {
+ struct dst_entry *dst = skb_dst(skb);
+ struct rtable *rt = container_of(dst, struct rtable, dst);
+
+ neigh = ip_neigh_for_gw(rt, skb, &is_v6gw);
+ } else if (nh->nh_family == AF_INET6) {
+ neigh = ip_neigh_gw6(dev, &nh->ipv6_nh);
+ is_v6gw = true;
+ } else if (nh->nh_family == AF_INET) {
+ neigh = ip_neigh_gw4(dev, nh->ipv4_nh);
+ } else {
+ rcu_read_unlock_bh();
+ goto out_drop;
+ }
+
if (likely(!IS_ERR(neigh))) {
int ret;
@@ -2309,33 +2334,37 @@ static int bpf_out_neigh_v4(struct net *net, struct sk_buff *skb)
return -ENETDOWN;
}
-static int __bpf_redirect_neigh_v4(struct sk_buff *skb, struct net_device *dev)
+static int __bpf_redirect_neigh_v4(struct sk_buff *skb, struct net_device *dev,
+ struct bpf_nh_params *nh)
{
const struct iphdr *ip4h = ip_hdr(skb);
struct net *net = dev_net(dev);
int err, ret = NET_XMIT_DROP;
- struct rtable *rt;
- struct flowi4 fl4 = {
- .flowi4_flags = FLOWI_FLAG_ANYSRC,
- .flowi4_mark = skb->mark,
- .flowi4_tos = RT_TOS(ip4h->tos),
- .flowi4_oif = dev->ifindex,
- .flowi4_proto = ip4h->protocol,
- .daddr = ip4h->daddr,
- .saddr = ip4h->saddr,
- };
- rt = ip_route_output_flow(net, &fl4, NULL);
- if (IS_ERR(rt))
- goto out_drop;
- if (rt->rt_type != RTN_UNICAST && rt->rt_type != RTN_LOCAL) {
- ip_rt_put(rt);
- goto out_drop;
+ if (!nh) {
+ struct flowi4 fl4 = {
+ .flowi4_flags = FLOWI_FLAG_ANYSRC,
+ .flowi4_mark = skb->mark,
+ .flowi4_tos = RT_TOS(ip4h->tos),
+ .flowi4_oif = dev->ifindex,
+ .flowi4_proto = ip4h->protocol,
+ .daddr = ip4h->daddr,
+ .saddr = ip4h->saddr,
+ };
+ struct rtable *rt;
+
+ rt = ip_route_output_flow(net, &fl4, NULL);
+ if (IS_ERR(rt))
+ goto out_drop;
+ if (rt->rt_type != RTN_UNICAST && rt->rt_type != RTN_LOCAL) {
+ ip_rt_put(rt);
+ goto out_drop;
+ }
+
+ skb_dst_set(skb, &rt->dst);
}
- skb_dst_set(skb, &rt->dst);
-
- err = bpf_out_neigh_v4(net, skb);
+ err = bpf_out_neigh_v4(net, skb, dev, nh);
if (unlikely(net_xmit_eval(err)))
dev->stats.tx_errors++;
else
@@ -2348,14 +2377,16 @@ static int __bpf_redirect_neigh_v4(struct sk_buff *skb, struct net_device *dev)
return ret;
}
#else
-static int __bpf_redirect_neigh_v4(struct sk_buff *skb, struct net_device *dev)
+static int __bpf_redirect_neigh_v4(struct sk_buff *skb, struct net_device *dev,
+ struct bpf_nh_params *nh)
{
kfree_skb(skb);
return NET_XMIT_DROP;
}
#endif /* CONFIG_INET */
-static int __bpf_redirect_neigh(struct sk_buff *skb, struct net_device *dev)
+static int __bpf_redirect_neigh(struct sk_buff *skb, struct net_device *dev,
+ struct bpf_nh_params *nh)
{
struct ethhdr *ethh = eth_hdr(skb);
@@ -2370,9 +2401,9 @@ static int __bpf_redirect_neigh(struct sk_buff *skb, struct net_device *dev)
skb_reset_network_header(skb);
if (skb->protocol == htons(ETH_P_IP))
- return __bpf_redirect_neigh_v4(skb, dev);
+ return __bpf_redirect_neigh_v4(skb, dev, nh);
else if (skb->protocol == htons(ETH_P_IPV6))
- return __bpf_redirect_neigh_v6(skb, dev);
+ return __bpf_redirect_neigh_v6(skb, dev, nh);
out:
kfree_skb(skb);
return -ENOTSUPP;
@@ -2382,7 +2413,8 @@ static int __bpf_redirect_neigh(struct sk_buff *skb, struct net_device *dev)
enum {
BPF_F_NEIGH = (1ULL << 1),
BPF_F_PEER = (1ULL << 2),
-#define BPF_F_REDIRECT_INTERNAL (BPF_F_NEIGH | BPF_F_PEER)
+ BPF_F_NEXTHOP = (1ULL << 3),
+#define BPF_F_REDIRECT_INTERNAL (BPF_F_NEIGH | BPF_F_PEER | BPF_F_NEXTHOP)
};
BPF_CALL_3(bpf_clone_redirect, struct sk_buff *, skb, u32, ifindex, u64, flags)
@@ -2455,7 +2487,8 @@ int skb_do_redirect(struct sk_buff *skb)
return -EAGAIN;
}
return flags & BPF_F_NEIGH ?
- __bpf_redirect_neigh(skb, dev) :
+ __bpf_redirect_neigh(skb, dev, flags & BPF_F_NEXTHOP ?
+ &ri->nh : NULL) :
__bpf_redirect(skb, dev, flags);
out_drop:
kfree_skb(skb);
@@ -2504,16 +2537,21 @@ static const struct bpf_func_proto bpf_redirect_peer_proto = {
.arg2_type = ARG_ANYTHING,
};
-BPF_CALL_2(bpf_redirect_neigh, u32, ifindex, u64, flags)
+BPF_CALL_4(bpf_redirect_neigh, u32, ifindex, struct bpf_redir_neigh *, params,
+ int, plen, u64, flags)
{
struct bpf_redirect_info *ri = this_cpu_ptr(&bpf_redirect_info);
- if (unlikely(flags))
+ if (unlikely((plen && plen < sizeof(*params)) || flags))
return TC_ACT_SHOT;
- ri->flags = BPF_F_NEIGH;
+ ri->flags = BPF_F_NEIGH | (plen ? BPF_F_NEXTHOP : 0);
ri->tgt_index = ifindex;
+ BUILD_BUG_ON(sizeof(struct bpf_redir_neigh) != sizeof(struct bpf_nh_params));
+ if (plen)
+ memcpy(&ri->nh, params, sizeof(ri->nh));
+
return TC_ACT_REDIRECT;
}
@@ -2522,7 +2560,9 @@ static const struct bpf_func_proto bpf_redirect_neigh_proto = {
.gpl_only = false,
.ret_type = RET_INTEGER,
.arg1_type = ARG_ANYTHING,
- .arg2_type = ARG_ANYTHING,
+ .arg2_type = ARG_PTR_TO_MEM_OR_NULL,
+ .arg3_type = ARG_CONST_SIZE_OR_ZERO,
+ .arg4_type = ARG_ANYTHING,
};
BPF_CALL_2(bpf_msg_apply_bytes, struct sk_msg *, msg, u32, bytes)
@@ -4693,7 +4733,8 @@ static int _bpf_setsockopt(struct sock *sk, int level, int optname,
cmpxchg(&sk->sk_pacing_status,
SK_PACING_NONE,
SK_PACING_NEEDED);
- sk->sk_max_pacing_rate = (val == ~0U) ? ~0UL : val;
+ sk->sk_max_pacing_rate = (val == ~0U) ?
+ ~0UL : (unsigned int)val;
sk->sk_pacing_rate = min(sk->sk_pacing_rate,
sk->sk_max_pacing_rate);
break;
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 68e0682..7d72236 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -3709,13 +3709,13 @@ static int rtnl_dellinkprop(struct sk_buff *skb, struct nlmsghdr *nlh,
return rtnl_linkprop(RTM_DELLINKPROP, skb, nlh, extack);
}
-static u16 rtnl_calcit(struct sk_buff *skb, struct nlmsghdr *nlh)
+static u32 rtnl_calcit(struct sk_buff *skb, struct nlmsghdr *nlh)
{
struct net *net = sock_net(skb->sk);
- struct net_device *dev;
+ size_t min_ifinfo_dump_size = 0;
struct nlattr *tb[IFLA_MAX+1];
u32 ext_filter_mask = 0;
- u16 min_ifinfo_dump_size = 0;
+ struct net_device *dev;
int hdrlen;
/* Same kernel<->userspace interface hack as in rtnl_dump_ifinfo. */
@@ -3735,9 +3735,8 @@ static u16 rtnl_calcit(struct sk_buff *skb, struct nlmsghdr *nlh)
*/
rcu_read_lock();
for_each_netdev_rcu(net, dev) {
- min_ifinfo_dump_size = max_t(u16, min_ifinfo_dump_size,
- if_nlmsg_size(dev,
- ext_filter_mask));
+ min_ifinfo_dump_size = max(min_ifinfo_dump_size,
+ if_nlmsg_size(dev, ext_filter_mask));
}
rcu_read_unlock();
@@ -5494,7 +5493,7 @@ static int rtnetlink_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh,
if (kind == 2 && nlh->nlmsg_flags&NLM_F_DUMP) {
struct sock *rtnl;
rtnl_dumpit_func dumpit;
- u16 min_dump_alloc = 0;
+ u32 min_dump_alloc = 0;
link = rtnl_get_link(family, type);
if (!link || !link->dumpit) {
diff --git a/net/core/sock.c b/net/core/sock.c
index 4e87293..727ea1c 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1163,7 +1163,7 @@ int sock_setsockopt(struct socket *sock, int level, int optname,
case SO_MAX_PACING_RATE:
{
- unsigned long ulval = (val == ~0U) ? ~0UL : val;
+ unsigned long ulval = (val == ~0U) ? ~0UL : (unsigned int)val;
if (sizeof(ulval) != sizeof(val) &&
optlen >= sizeof(ulval) &&
diff --git a/net/dsa/tag_ksz.c b/net/dsa/tag_ksz.c
index 945a9bd..0a5aa98 100644
--- a/net/dsa/tag_ksz.c
+++ b/net/dsa/tag_ksz.c
@@ -123,6 +123,7 @@ static const struct dsa_device_ops ksz8795_netdev_ops = {
.xmit = ksz8795_xmit,
.rcv = ksz8795_rcv,
.overhead = KSZ_INGRESS_TAG_LEN,
+ .tail_tag = true,
};
DSA_TAG_DRIVER(ksz8795_netdev_ops);
@@ -199,6 +200,7 @@ static const struct dsa_device_ops ksz9477_netdev_ops = {
.xmit = ksz9477_xmit,
.rcv = ksz9477_rcv,
.overhead = KSZ9477_INGRESS_TAG_LEN,
+ .tail_tag = true,
};
DSA_TAG_DRIVER(ksz9477_netdev_ops);
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 07f67ce..005faea 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -239,7 +239,7 @@ static struct {
/**
* icmp_global_allow - Are we allowed to send one more ICMP message ?
*
- * Uses a token bucket to limit our ICMP messages to sysctl_icmp_msgs_per_sec.
+ * Uses a token bucket to limit our ICMP messages to ~sysctl_icmp_msgs_per_sec.
* Returns false if we reached the limit and can not send another packet.
* Note: called with BH disabled
*/
@@ -267,7 +267,10 @@ bool icmp_global_allow(void)
}
credit = min_t(u32, icmp_global.credit + incr, sysctl_icmp_msgs_burst);
if (credit) {
- credit--;
+ /* We want to use a credit of one in average, but need to randomize
+ * it for security reasons.
+ */
+ credit = max_t(int, credit - prandom_u32_max(3), 0);
rc = true;
}
WRITE_ONCE(icmp_global.credit, credit);
diff --git a/net/ipv4/nexthop.c b/net/ipv4/nexthop.c
index 8c0f17c..0dc43ad 100644
--- a/net/ipv4/nexthop.c
+++ b/net/ipv4/nexthop.c
@@ -845,7 +845,7 @@ static void remove_nexthop_from_groups(struct net *net, struct nexthop *nh,
remove_nh_grp_entry(net, nhge, nlinfo);
/* make sure all see the newly published array before releasing rtnl */
- synchronize_rcu();
+ synchronize_net();
}
static void remove_nexthop_group(struct nexthop *nh, struct nl_info *nlinfo)
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 67f10d3..fc44583 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5827,6 +5827,8 @@ void tcp_rcv_established(struct sock *sk, struct sk_buff *skb)
tcp_data_snd_check(sk);
if (!inet_csk_ack_scheduled(sk))
goto no_ack;
+ } else {
+ tcp_update_wl(tp, TCP_SKB_CB(skb)->seq);
}
__tcp_ack_snd_check(sk, 0);
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index fed9666..054d287 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -355,6 +355,7 @@ static int nf_ct_frag6_reasm(struct frag_queue *fq, struct sk_buff *skb,
ipv6_hdr(skb)->payload_len = htons(payload_len);
ipv6_change_dsfield(ipv6_hdr(skb), 0xff, ecn);
IP6CB(skb)->frag_max_size = sizeof(struct ipv6hdr) + fq->q.max_size;
+ IP6CB(skb)->flags |= IP6SKB_FRAGMENTED;
/* Yes, and fold redundant checksum back. 8) */
if (skb->ip_summed == CHECKSUM_COMPLETE)
diff --git a/net/mpls/mpls_iptunnel.c b/net/mpls/mpls_iptunnel.c
index 2def857..ef59e25 100644
--- a/net/mpls/mpls_iptunnel.c
+++ b/net/mpls/mpls_iptunnel.c
@@ -300,5 +300,6 @@ static void __exit mpls_iptunnel_exit(void)
module_exit(mpls_iptunnel_exit);
MODULE_ALIAS_RTNL_LWT(MPLS);
+MODULE_SOFTDEP("post: mpls_gso");
MODULE_DESCRIPTION("MultiProtocol Label Switching IP Tunnels");
MODULE_LICENSE("GPL v2");
diff --git a/net/mptcp/Kconfig b/net/mptcp/Kconfig
index 698bc35..a014149 100644
--- a/net/mptcp/Kconfig
+++ b/net/mptcp/Kconfig
@@ -19,14 +19,11 @@
config MPTCP_IPV6
bool "MPTCP: IPv6 support for Multipath TCP"
- select IPV6
+ depends on IPV6=y
default y
-endif
-
config MPTCP_KUNIT_TESTS
tristate "This builds the MPTCP KUnit tests" if !KUNIT_ALL_TESTS
- select MPTCP
depends on KUNIT
default KUNIT_ALL_TESTS
help
@@ -39,3 +36,4 @@
If unsure, say N.
+endif
diff --git a/net/mptcp/options.c b/net/mptcp/options.c
index 092a2d4..a044dd4 100644
--- a/net/mptcp/options.c
+++ b/net/mptcp/options.c
@@ -241,7 +241,6 @@ static void mptcp_parse_option(const struct sk_buff *skb,
}
mp_opt->add_addr = 1;
- mp_opt->port = 0;
mp_opt->addr_id = *ptr++;
pr_debug("ADD_ADDR: id=%d, echo=%d", mp_opt->addr_id, mp_opt->echo);
if (mp_opt->family == MPTCP_ADDR_IPVERSION_4) {
@@ -297,6 +296,8 @@ void mptcp_get_options(const struct sk_buff *skb,
mp_opt->mp_capable = 0;
mp_opt->mp_join = 0;
mp_opt->add_addr = 0;
+ mp_opt->ahmac = 0;
+ mp_opt->port = 0;
mp_opt->rm_addr = 0;
mp_opt->dss = 0;
diff --git a/net/netfilter/ipvs/ip_vs_proto_tcp.c b/net/netfilter/ipvs/ip_vs_proto_tcp.c
index dc2e7da..7da5139 100644
--- a/net/netfilter/ipvs/ip_vs_proto_tcp.c
+++ b/net/netfilter/ipvs/ip_vs_proto_tcp.c
@@ -539,8 +539,8 @@ set_tcp_state(struct ip_vs_proto_data *pd, struct ip_vs_conn *cp,
if (new_state != cp->state) {
struct ip_vs_dest *dest = cp->dest;
- IP_VS_DBG_BUF(8, "%s %s [%c%c%c%c] %s:%d->"
- "%s:%d state: %s->%s conn->refcnt:%d\n",
+ IP_VS_DBG_BUF(8, "%s %s [%c%c%c%c] c:%s:%d v:%s:%d "
+ "d:%s:%d state: %s->%s conn->refcnt:%d\n",
pd->pp->name,
((state_off == TCP_DIR_OUTPUT) ?
"output " : "input "),
@@ -548,10 +548,12 @@ set_tcp_state(struct ip_vs_proto_data *pd, struct ip_vs_conn *cp,
th->fin ? 'F' : '.',
th->ack ? 'A' : '.',
th->rst ? 'R' : '.',
- IP_VS_DBG_ADDR(cp->daf, &cp->daddr),
- ntohs(cp->dport),
IP_VS_DBG_ADDR(cp->af, &cp->caddr),
ntohs(cp->cport),
+ IP_VS_DBG_ADDR(cp->af, &cp->vaddr),
+ ntohs(cp->vport),
+ IP_VS_DBG_ADDR(cp->daf, &cp->daddr),
+ ntohs(cp->dport),
tcp_state_name(cp->state),
tcp_state_name(new_state),
refcount_read(&cp->refcnt));
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index e8c86ee..c8fb218 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -541,13 +541,20 @@ static bool tcp_in_window(const struct nf_conn *ct,
swin = win << sender->td_scale;
sender->td_maxwin = (swin == 0 ? 1 : swin);
sender->td_maxend = end + sender->td_maxwin;
- /*
- * We haven't seen traffic in the other direction yet
- * but we have to tweak window tracking to pass III
- * and IV until that happens.
- */
- if (receiver->td_maxwin == 0)
+ if (receiver->td_maxwin == 0) {
+ /* We haven't seen traffic in the other
+ * direction yet but we have to tweak window
+ * tracking to pass III and IV until that
+ * happens.
+ */
receiver->td_end = receiver->td_maxend = sack;
+ } else if (sack == receiver->td_end + 1) {
+ /* Likely a reply to a keepalive.
+ * Needed for III.
+ */
+ receiver->td_end++;
+ }
+
}
} else if (((state->state == TCP_CONNTRACK_SYN_SENT
&& dir == IP_CT_DIR_ORIGINAL)
diff --git a/net/netfilter/nf_dup_netdev.c b/net/netfilter/nf_dup_netdev.c
index 2b01a15..a579e59 100644
--- a/net/netfilter/nf_dup_netdev.c
+++ b/net/netfilter/nf_dup_netdev.c
@@ -19,6 +19,7 @@ static void nf_do_netdev_egress(struct sk_buff *skb, struct net_device *dev)
skb_push(skb, skb->mac_len);
skb->dev = dev;
+ skb->tstamp = 0;
dev_queue_xmit(skb);
}
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 9957e0e..65cb8e3 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -302,7 +302,7 @@ static void nft_rule_expr_activate(const struct nft_ctx *ctx,
struct nft_expr *expr;
expr = nft_expr_first(rule);
- while (expr != nft_expr_last(rule) && expr->ops) {
+ while (nft_expr_more(rule, expr)) {
if (expr->ops->activate)
expr->ops->activate(ctx, expr);
@@ -317,7 +317,7 @@ static void nft_rule_expr_deactivate(const struct nft_ctx *ctx,
struct nft_expr *expr;
expr = nft_expr_first(rule);
- while (expr != nft_expr_last(rule) && expr->ops) {
+ while (nft_expr_more(rule, expr)) {
if (expr->ops->deactivate)
expr->ops->deactivate(ctx, expr, phase);
@@ -3080,7 +3080,7 @@ static void nf_tables_rule_destroy(const struct nft_ctx *ctx,
* is called on error from nf_tables_newrule().
*/
expr = nft_expr_first(rule);
- while (expr != nft_expr_last(rule) && expr->ops) {
+ while (nft_expr_more(rule, expr)) {
next = nft_expr_next(expr);
nf_tables_expr_destroy(ctx, expr);
expr = next;
diff --git a/net/netfilter/nf_tables_offload.c b/net/netfilter/nf_tables_offload.c
index 7c7e066..9f62572 100644
--- a/net/netfilter/nf_tables_offload.c
+++ b/net/netfilter/nf_tables_offload.c
@@ -37,7 +37,7 @@ struct nft_flow_rule *nft_flow_rule_create(struct net *net,
struct nft_expr *expr;
expr = nft_expr_first(rule);
- while (expr->ops && expr != nft_expr_last(rule)) {
+ while (nft_expr_more(rule, expr)) {
if (expr->ops->offload_flags & NFT_OFFLOAD_F_ACTION)
num_actions++;
@@ -61,7 +61,7 @@ struct nft_flow_rule *nft_flow_rule_create(struct net *net,
ctx->net = net;
ctx->dep.type = NFT_OFFLOAD_DEP_UNSPEC;
- while (expr->ops && expr != nft_expr_last(rule)) {
+ while (nft_expr_more(rule, expr)) {
if (!expr->ops->offload) {
err = -EOPNOTSUPP;
goto err_out;
diff --git a/net/netfilter/nft_fwd_netdev.c b/net/netfilter/nft_fwd_netdev.c
index 3087e23..b779859 100644
--- a/net/netfilter/nft_fwd_netdev.c
+++ b/net/netfilter/nft_fwd_netdev.c
@@ -138,6 +138,7 @@ static void nft_fwd_neigh_eval(const struct nft_expr *expr,
return;
skb->dev = dev;
+ skb->tstamp = 0;
neigh_xmit(neigh_table, dev, addr, skb);
out:
regs->verdict.code = verdict;
diff --git a/net/nfc/netlink.c b/net/nfc/netlink.c
index e894254..8709f3d 100644
--- a/net/nfc/netlink.c
+++ b/net/nfc/netlink.c
@@ -1217,7 +1217,7 @@ static int nfc_genl_fw_download(struct sk_buff *skb, struct genl_info *info)
u32 idx;
char firmware_name[NFC_FIRMWARE_NAME_MAXSIZE + 1];
- if (!info->attrs[NFC_ATTR_DEVICE_INDEX])
+ if (!info->attrs[NFC_ATTR_DEVICE_INDEX] || !info->attrs[NFC_ATTR_FIRMWARE_NAME])
return -EINVAL;
idx = nla_get_u32(info->attrs[NFC_ATTR_DEVICE_INDEX]);
diff --git a/net/openvswitch/flow_table.c b/net/openvswitch/flow_table.c
index 87c286a..f3486a3 100644
--- a/net/openvswitch/flow_table.c
+++ b/net/openvswitch/flow_table.c
@@ -175,7 +175,7 @@ static struct table_instance *table_instance_alloc(int new_size)
static void __mask_array_destroy(struct mask_array *ma)
{
- free_percpu(ma->masks_usage_cntr);
+ free_percpu(ma->masks_usage_stats);
kfree(ma);
}
@@ -199,15 +199,15 @@ static void tbl_mask_array_reset_counters(struct mask_array *ma)
ma->masks_usage_zero_cntr[i] = 0;
for_each_possible_cpu(cpu) {
- u64 *usage_counters = per_cpu_ptr(ma->masks_usage_cntr,
- cpu);
+ struct mask_array_stats *stats;
unsigned int start;
u64 counter;
+ stats = per_cpu_ptr(ma->masks_usage_stats, cpu);
do {
- start = u64_stats_fetch_begin_irq(&ma->syncp);
- counter = usage_counters[i];
- } while (u64_stats_fetch_retry_irq(&ma->syncp, start));
+ start = u64_stats_fetch_begin_irq(&stats->syncp);
+ counter = stats->usage_cntrs[i];
+ } while (u64_stats_fetch_retry_irq(&stats->syncp, start));
ma->masks_usage_zero_cntr[i] += counter;
}
@@ -230,9 +230,10 @@ static struct mask_array *tbl_mask_array_alloc(int size)
sizeof(struct sw_flow_mask *) *
size);
- new->masks_usage_cntr = __alloc_percpu(sizeof(u64) * size,
- __alignof__(u64));
- if (!new->masks_usage_cntr) {
+ new->masks_usage_stats = __alloc_percpu(sizeof(struct mask_array_stats) +
+ sizeof(u64) * size,
+ __alignof__(u64));
+ if (!new->masks_usage_stats) {
kfree(new);
return NULL;
}
@@ -722,6 +723,8 @@ static struct sw_flow *masked_flow_lookup(struct table_instance *ti,
/* Flow lookup does full lookup on flow table. It starts with
* mask from index passed in *index.
+ * This function MUST be called with BH disabled due to the use
+ * of CPU specific variables.
*/
static struct sw_flow *flow_lookup(struct flow_table *tbl,
struct table_instance *ti,
@@ -731,7 +734,7 @@ static struct sw_flow *flow_lookup(struct flow_table *tbl,
u32 *n_cache_hit,
u32 *index)
{
- u64 *usage_counters = this_cpu_ptr(ma->masks_usage_cntr);
+ struct mask_array_stats *stats = this_cpu_ptr(ma->masks_usage_stats);
struct sw_flow *flow;
struct sw_flow_mask *mask;
int i;
@@ -741,9 +744,9 @@ static struct sw_flow *flow_lookup(struct flow_table *tbl,
if (mask) {
flow = masked_flow_lookup(ti, key, mask, n_mask_hit);
if (flow) {
- u64_stats_update_begin(&ma->syncp);
- usage_counters[*index]++;
- u64_stats_update_end(&ma->syncp);
+ u64_stats_update_begin(&stats->syncp);
+ stats->usage_cntrs[*index]++;
+ u64_stats_update_end(&stats->syncp);
(*n_cache_hit)++;
return flow;
}
@@ -762,9 +765,9 @@ static struct sw_flow *flow_lookup(struct flow_table *tbl,
flow = masked_flow_lookup(ti, key, mask, n_mask_hit);
if (flow) { /* Found */
*index = i;
- u64_stats_update_begin(&ma->syncp);
- usage_counters[*index]++;
- u64_stats_update_end(&ma->syncp);
+ u64_stats_update_begin(&stats->syncp);
+ stats->usage_cntrs[*index]++;
+ u64_stats_update_end(&stats->syncp);
return flow;
}
}
@@ -850,9 +853,17 @@ struct sw_flow *ovs_flow_tbl_lookup(struct flow_table *tbl,
struct mask_array *ma = rcu_dereference_ovsl(tbl->mask_array);
u32 __always_unused n_mask_hit;
u32 __always_unused n_cache_hit;
+ struct sw_flow *flow;
u32 index = 0;
- return flow_lookup(tbl, ti, ma, key, &n_mask_hit, &n_cache_hit, &index);
+ /* This function gets called trough the netlink interface and therefore
+ * is preemptible. However, flow_lookup() function needs to be called
+ * with BH disabled due to CPU specific variables.
+ */
+ local_bh_disable();
+ flow = flow_lookup(tbl, ti, ma, key, &n_mask_hit, &n_cache_hit, &index);
+ local_bh_enable();
+ return flow;
}
struct sw_flow *ovs_flow_tbl_lookup_exact(struct flow_table *tbl,
@@ -1109,7 +1120,6 @@ void ovs_flow_masks_rebalance(struct flow_table *table)
for (i = 0; i < ma->max; i++) {
struct sw_flow_mask *mask;
- unsigned int start;
int cpu;
mask = rcu_dereference_ovsl(ma->masks[i]);
@@ -1120,14 +1130,16 @@ void ovs_flow_masks_rebalance(struct flow_table *table)
masks_and_count[i].counter = 0;
for_each_possible_cpu(cpu) {
- u64 *usage_counters = per_cpu_ptr(ma->masks_usage_cntr,
- cpu);
+ struct mask_array_stats *stats;
+ unsigned int start;
u64 counter;
+ stats = per_cpu_ptr(ma->masks_usage_stats, cpu);
do {
- start = u64_stats_fetch_begin_irq(&ma->syncp);
- counter = usage_counters[i];
- } while (u64_stats_fetch_retry_irq(&ma->syncp, start));
+ start = u64_stats_fetch_begin_irq(&stats->syncp);
+ counter = stats->usage_cntrs[i];
+ } while (u64_stats_fetch_retry_irq(&stats->syncp,
+ start));
masks_and_count[i].counter += counter;
}
diff --git a/net/openvswitch/flow_table.h b/net/openvswitch/flow_table.h
index d8fb7a3..9e659db 100644
--- a/net/openvswitch/flow_table.h
+++ b/net/openvswitch/flow_table.h
@@ -38,12 +38,16 @@ struct mask_count {
u64 counter;
};
+struct mask_array_stats {
+ struct u64_stats_sync syncp;
+ u64 usage_cntrs[];
+};
+
struct mask_array {
struct rcu_head rcu;
int count, max;
- u64 __percpu *masks_usage_cntr;
+ struct mask_array_stats __percpu *masks_usage_stats;
u64 *masks_usage_zero_cntr;
- struct u64_stats_sync syncp;
struct sw_flow_mask __rcu *masks[];
};
diff --git a/net/sched/act_ct.c b/net/sched/act_ct.c
index 9c79fb9..aba3cd8 100644
--- a/net/sched/act_ct.c
+++ b/net/sched/act_ct.c
@@ -156,11 +156,11 @@ tcf_ct_flow_table_add_action_nat_udp(const struct nf_conntrack_tuple *tuple,
__be16 target_dst = target.dst.u.udp.port;
if (target_src != tuple->src.u.udp.port)
- tcf_ct_add_mangle_action(action, FLOW_ACT_MANGLE_HDR_TYPE_TCP,
+ tcf_ct_add_mangle_action(action, FLOW_ACT_MANGLE_HDR_TYPE_UDP,
offsetof(struct udphdr, source),
0xFFFF, be16_to_cpu(target_src));
if (target_dst != tuple->dst.u.udp.port)
- tcf_ct_add_mangle_action(action, FLOW_ACT_MANGLE_HDR_TYPE_TCP,
+ tcf_ct_add_mangle_action(action, FLOW_ACT_MANGLE_HDR_TYPE_UDP,
offsetof(struct udphdr, dest),
0xFFFF, be16_to_cpu(target_dst));
}
diff --git a/net/sched/act_tunnel_key.c b/net/sched/act_tunnel_key.c
index a229751..85c0d0d 100644
--- a/net/sched/act_tunnel_key.c
+++ b/net/sched/act_tunnel_key.c
@@ -459,7 +459,7 @@ static int tunnel_key_init(struct net *net, struct nlattr *nla,
metadata = __ipv6_tun_set_dst(&saddr, &daddr, tos, ttl, dst_port,
0, flags,
- key_id, 0);
+ key_id, opts_len);
} else {
NL_SET_ERR_MSG(extack, "Missing either ipv4 or ipv6 src and dst");
ret = -EINVAL;
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index 41a55c6..faeabff 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -3712,7 +3712,7 @@ int tc_setup_flow_action(struct flow_action *flow_action,
entry->gate.num_entries = tcf_gate_num_entries(act);
err = tcf_gate_get_entries(entry, act);
if (err)
- goto err_out;
+ goto err_out_locked;
} else {
err = -EOPNOTSUPP;
goto err_out_locked;
diff --git a/net/tipc/bcast.c b/net/tipc/bcast.c
index 940d176..d4beca8 100644
--- a/net/tipc/bcast.c
+++ b/net/tipc/bcast.c
@@ -108,6 +108,8 @@ static void tipc_bcbase_select_primary(struct net *net)
{
struct tipc_bc_base *bb = tipc_bc_base(net);
int all_dests = tipc_link_bc_peers(bb->link);
+ int max_win = tipc_link_max_win(bb->link);
+ int min_win = tipc_link_min_win(bb->link);
int i, mtu, prim;
bb->primary_bearer = INVALID_BEARER_ID;
@@ -121,8 +123,12 @@ static void tipc_bcbase_select_primary(struct net *net)
continue;
mtu = tipc_bearer_mtu(net, i);
- if (mtu < tipc_link_mtu(bb->link))
+ if (mtu < tipc_link_mtu(bb->link)) {
tipc_link_set_mtu(bb->link, mtu);
+ tipc_link_set_queue_limits(bb->link,
+ min_win,
+ max_win);
+ }
bb->bcast_support &= tipc_bearer_bcast_support(net, i);
if (bb->dests[i] < all_dests)
continue;
@@ -585,7 +591,7 @@ static int tipc_bc_link_set_queue_limits(struct net *net, u32 max_win)
if (max_win > TIPC_MAX_LINK_WIN)
return -EINVAL;
tipc_bcast_lock(net);
- tipc_link_set_queue_limits(l, BCLINK_WIN_MIN, max_win);
+ tipc_link_set_queue_limits(l, tipc_link_min_win(l), max_win);
tipc_bcast_unlock(net);
return 0;
}
diff --git a/samples/bpf/sockex3_kern.c b/samples/bpf/sockex3_kern.c
index 8142d02..b363503 100644
--- a/samples/bpf/sockex3_kern.c
+++ b/samples/bpf/sockex3_kern.c
@@ -44,17 +44,17 @@ static inline void parse_eth_proto(struct __sk_buff *skb, u32 proto)
switch (proto) {
case ETH_P_8021Q:
case ETH_P_8021AD:
- bpf_tail_call_static(skb, &jmp_table, PARSE_VLAN);
+ bpf_tail_call(skb, &jmp_table, PARSE_VLAN);
break;
case ETH_P_MPLS_UC:
case ETH_P_MPLS_MC:
- bpf_tail_call_static(skb, &jmp_table, PARSE_MPLS);
+ bpf_tail_call(skb, &jmp_table, PARSE_MPLS);
break;
case ETH_P_IP:
- bpf_tail_call_static(skb, &jmp_table, PARSE_IP);
+ bpf_tail_call(skb, &jmp_table, PARSE_IP);
break;
case ETH_P_IPV6:
- bpf_tail_call_static(skb, &jmp_table, PARSE_IPV6);
+ bpf_tail_call(skb, &jmp_table, PARSE_IPV6);
break;
}
}
diff --git a/scripts/bpf_helpers_doc.py b/scripts/bpf_helpers_doc.py
index 7d86fdd..6769caa 100755
--- a/scripts/bpf_helpers_doc.py
+++ b/scripts/bpf_helpers_doc.py
@@ -453,6 +453,7 @@
'struct bpf_perf_event_data',
'struct bpf_perf_event_value',
'struct bpf_pidns_info',
+ 'struct bpf_redir_neigh',
'struct bpf_sk_lookup',
'struct bpf_sock',
'struct bpf_sock_addr',
diff --git a/security/safesetid/lsm.c b/security/safesetid/lsm.c
index 7760019..8a176b6 100644
--- a/security/safesetid/lsm.c
+++ b/security/safesetid/lsm.c
@@ -24,20 +24,36 @@
/* Flag indicating whether initialization completed */
int safesetid_initialized;
-struct setuid_ruleset __rcu *safesetid_setuid_rules;
+struct setid_ruleset __rcu *safesetid_setuid_rules;
+struct setid_ruleset __rcu *safesetid_setgid_rules;
+
/* Compute a decision for a transition from @src to @dst under @policy. */
-enum sid_policy_type _setuid_policy_lookup(struct setuid_ruleset *policy,
- kuid_t src, kuid_t dst)
+enum sid_policy_type _setid_policy_lookup(struct setid_ruleset *policy,
+ kid_t src, kid_t dst)
{
- struct setuid_rule *rule;
+ struct setid_rule *rule;
enum sid_policy_type result = SIDPOL_DEFAULT;
- hash_for_each_possible(policy->rules, rule, next, __kuid_val(src)) {
- if (!uid_eq(rule->src_uid, src))
- continue;
- if (uid_eq(rule->dst_uid, dst))
- return SIDPOL_ALLOWED;
+ if (policy->type == UID) {
+ hash_for_each_possible(policy->rules, rule, next, __kuid_val(src.uid)) {
+ if (!uid_eq(rule->src_id.uid, src.uid))
+ continue;
+ if (uid_eq(rule->dst_id.uid, dst.uid))
+ return SIDPOL_ALLOWED;
+ result = SIDPOL_CONSTRAINED;
+ }
+ } else if (policy->type == GID) {
+ hash_for_each_possible(policy->rules, rule, next, __kgid_val(src.gid)) {
+ if (!gid_eq(rule->src_id.gid, src.gid))
+ continue;
+ if (gid_eq(rule->dst_id.gid, dst.gid)){
+ return SIDPOL_ALLOWED;
+ }
+ result = SIDPOL_CONSTRAINED;
+ }
+ } else {
+ /* Should not reach here, report the ID as contrainsted */
result = SIDPOL_CONSTRAINED;
}
return result;
@@ -47,15 +63,26 @@ enum sid_policy_type _setuid_policy_lookup(struct setuid_ruleset *policy,
* Compute a decision for a transition from @src to @dst under the active
* policy.
*/
-static enum sid_policy_type setuid_policy_lookup(kuid_t src, kuid_t dst)
+static enum sid_policy_type setid_policy_lookup(kid_t src, kid_t dst, enum setid_type new_type)
{
enum sid_policy_type result = SIDPOL_DEFAULT;
- struct setuid_ruleset *pol;
+ struct setid_ruleset *pol;
rcu_read_lock();
- pol = rcu_dereference(safesetid_setuid_rules);
- if (pol)
- result = _setuid_policy_lookup(pol, src, dst);
+ if (new_type == UID)
+ pol = rcu_dereference(safesetid_setuid_rules);
+ else if (new_type == GID)
+ pol = rcu_dereference(safesetid_setgid_rules);
+ else { /* Should not reach here */
+ result = SIDPOL_CONSTRAINED;
+ rcu_read_unlock();
+ return result;
+ }
+
+ if (pol) {
+ pol->type = new_type;
+ result = _setid_policy_lookup(pol, src, dst);
+ }
rcu_read_unlock();
return result;
}
@@ -65,57 +92,101 @@ static int safesetid_security_capable(const struct cred *cred,
int cap,
unsigned int opts)
{
- /* We're only interested in CAP_SETUID. */
- if (cap != CAP_SETUID)
+ /* We're only interested in CAP_SETUID and CAP_SETGID. */
+ if (cap != CAP_SETUID && cap != CAP_SETGID)
return 0;
/*
- * If CAP_SETUID is currently used for a set*uid() syscall, we want to
+ * If CAP_SET{U/G}ID is currently used for a setid() syscall, we want to
* let it go through here; the real security check happens later, in the
- * task_fix_setuid hook.
+ * task_fix_set{u/g}id hook.
+ *
+ * NOTE:
+ * Until we add support for restricting setgroups() calls, GID security
+ * policies offer no meaningful security since we always return 0 here
+ * when called from within the setgroups() syscall and there is no
+ * additional hook later on to enforce security policies for setgroups().
*/
if ((opts & CAP_OPT_INSETID) != 0)
return 0;
- /*
- * If no policy applies to this task, allow the use of CAP_SETUID for
- * other purposes.
- */
- if (setuid_policy_lookup(cred->uid, INVALID_UID) == SIDPOL_DEFAULT)
+ switch (cap) {
+ case CAP_SETUID:
+ /*
+ * If no policy applies to this task, allow the use of CAP_SETUID for
+ * other purposes.
+ */
+ if (setid_policy_lookup((kid_t){.uid = cred->uid}, INVALID_ID, UID) == SIDPOL_DEFAULT)
+ return 0;
+ /*
+ * Reject use of CAP_SETUID for functionality other than calling
+ * set*uid() (e.g. setting up userns uid mappings).
+ */
+ pr_warn("Operation requires CAP_SETUID, which is not available to UID %u for operations besides approved set*uid transitions\n",
+ __kuid_val(cred->uid));
+ return -EPERM;
+ break;
+ case CAP_SETGID:
+ /*
+ * If no policy applies to this task, allow the use of CAP_SETGID for
+ * other purposes.
+ */
+ if (setid_policy_lookup((kid_t){.gid = cred->gid}, INVALID_ID, GID) == SIDPOL_DEFAULT)
+ return 0;
+ /*
+ * Reject use of CAP_SETUID for functionality other than calling
+ * set*gid() (e.g. setting up userns gid mappings).
+ */
+ pr_warn("Operation requires CAP_SETGID, which is not available to GID %u for operations besides approved set*gid transitions\n",
+ __kuid_val(cred->uid));
+ return -EPERM;
+ break;
+ default:
+ /* Error, the only capabilities were checking for is CAP_SETUID/GID */
return 0;
-
- /*
- * Reject use of CAP_SETUID for functionality other than calling
- * set*uid() (e.g. setting up userns uid mappings).
- */
- pr_warn("Operation requires CAP_SETUID, which is not available to UID %u for operations besides approved set*uid transitions\n",
- __kuid_val(cred->uid));
- return -EPERM;
+ break;
+ }
+ return 0;
}
/*
* Check whether a caller with old credentials @old is allowed to switch to
- * credentials that contain @new_uid.
+ * credentials that contain @new_id.
*/
-static bool uid_permitted_for_cred(const struct cred *old, kuid_t new_uid)
+static bool id_permitted_for_cred(const struct cred *old, kid_t new_id, enum setid_type new_type)
{
bool permitted;
- /* If our old creds already had this UID in it, it's fine. */
- if (uid_eq(new_uid, old->uid) || uid_eq(new_uid, old->euid) ||
- uid_eq(new_uid, old->suid))
- return true;
+ /* If our old creds already had this ID in it, it's fine. */
+ if (new_type == UID) {
+ if (uid_eq(new_id.uid, old->uid) || uid_eq(new_id.uid, old->euid) ||
+ uid_eq(new_id.uid, old->suid))
+ return true;
+ } else if (new_type == GID){
+ if (gid_eq(new_id.gid, old->gid) || gid_eq(new_id.gid, old->egid) ||
+ gid_eq(new_id.gid, old->sgid))
+ return true;
+ } else /* Error, new_type is an invalid type */
+ return false;
/*
* Transitions to new UIDs require a check against the policy of the old
* RUID.
*/
permitted =
- setuid_policy_lookup(old->uid, new_uid) != SIDPOL_CONSTRAINED;
+ setid_policy_lookup((kid_t){.uid = old->uid}, new_id, new_type) != SIDPOL_CONSTRAINED;
+
if (!permitted) {
- pr_warn("UID transition ((%d,%d,%d) -> %d) blocked\n",
- __kuid_val(old->uid), __kuid_val(old->euid),
- __kuid_val(old->suid), __kuid_val(new_uid));
+ if (new_type == UID) {
+ pr_warn("UID transition ((%d,%d,%d) -> %d) blocked\n",
+ __kuid_val(old->uid), __kuid_val(old->euid),
+ __kuid_val(old->suid), __kuid_val(new_id.uid));
+ } else if (new_type == GID) {
+ pr_warn("GID transition ((%d,%d,%d) -> %d) blocked\n",
+ __kgid_val(old->gid), __kgid_val(old->egid),
+ __kgid_val(old->sgid), __kgid_val(new_id.gid));
+ } else /* Error, new_type is an invalid type */
+ return false;
}
return permitted;
}
@@ -131,18 +202,42 @@ static int safesetid_task_fix_setuid(struct cred *new,
{
/* Do nothing if there are no setuid restrictions for our old RUID. */
- if (setuid_policy_lookup(old->uid, INVALID_UID) == SIDPOL_DEFAULT)
+ if (setid_policy_lookup((kid_t){.uid = old->uid}, INVALID_ID, UID) == SIDPOL_DEFAULT)
return 0;
- if (uid_permitted_for_cred(old, new->uid) &&
- uid_permitted_for_cred(old, new->euid) &&
- uid_permitted_for_cred(old, new->suid) &&
- uid_permitted_for_cred(old, new->fsuid))
+ if (id_permitted_for_cred(old, (kid_t){.uid = new->uid}, UID) &&
+ id_permitted_for_cred(old, (kid_t){.uid = new->euid}, UID) &&
+ id_permitted_for_cred(old, (kid_t){.uid = new->suid}, UID) &&
+ id_permitted_for_cred(old, (kid_t){.uid = new->fsuid}, UID))
return 0;
/*
* Kill this process to avoid potential security vulnerabilities
- * that could arise from a missing whitelist entry preventing a
+ * that could arise from a missing allowlist entry preventing a
+ * privileged process from dropping to a lesser-privileged one.
+ */
+ force_sig(SIGKILL);
+ return -EACCES;
+}
+
+static int safesetid_task_fix_setgid(struct cred *new,
+ const struct cred *old,
+ int flags)
+{
+
+ /* Do nothing if there are no setgid restrictions for our old RGID. */
+ if (setid_policy_lookup((kid_t){.gid = old->gid}, INVALID_ID, GID) == SIDPOL_DEFAULT)
+ return 0;
+
+ if (id_permitted_for_cred(old, (kid_t){.gid = new->gid}, GID) &&
+ id_permitted_for_cred(old, (kid_t){.gid = new->egid}, GID) &&
+ id_permitted_for_cred(old, (kid_t){.gid = new->sgid}, GID) &&
+ id_permitted_for_cred(old, (kid_t){.gid = new->fsgid}, GID))
+ return 0;
+
+ /*
+ * Kill this process to avoid potential security vulnerabilities
+ * that could arise from a missing allowlist entry preventing a
* privileged process from dropping to a lesser-privileged one.
*/
force_sig(SIGKILL);
@@ -151,6 +246,7 @@ static int safesetid_task_fix_setuid(struct cred *new,
static struct security_hook_list safesetid_security_hooks[] = {
LSM_HOOK_INIT(task_fix_setuid, safesetid_task_fix_setuid),
+ LSM_HOOK_INIT(task_fix_setgid, safesetid_task_fix_setgid),
LSM_HOOK_INIT(capable, safesetid_security_capable)
};
diff --git a/security/safesetid/lsm.h b/security/safesetid/lsm.h
index db6d16e..bde8c43 100644
--- a/security/safesetid/lsm.h
+++ b/security/safesetid/lsm.h
@@ -27,27 +27,47 @@ enum sid_policy_type {
SIDPOL_ALLOWED /* target ID explicitly allowed */
};
+typedef union {
+ kuid_t uid;
+ kgid_t gid;
+} kid_t;
+
+enum setid_type {
+ UID,
+ GID
+};
+
/*
- * Hash table entry to store safesetid policy signifying that 'src_uid'
- * can setuid to 'dst_uid'.
+ * Hash table entry to store safesetid policy signifying that 'src_id'
+ * can set*id to 'dst_id'.
*/
-struct setuid_rule {
+struct setid_rule {
struct hlist_node next;
- kuid_t src_uid;
- kuid_t dst_uid;
+ kid_t src_id;
+ kid_t dst_id;
+
+ /* Flag to signal if rule is for UID's or GID's */
+ enum setid_type type;
};
#define SETID_HASH_BITS 8 /* 256 buckets in hash table */
-struct setuid_ruleset {
+/* Extension of INVALID_UID/INVALID_GID for kid_t type */
+#define INVALID_ID (kid_t){.uid = INVALID_UID}
+
+struct setid_ruleset {
DECLARE_HASHTABLE(rules, SETID_HASH_BITS);
char *policy_str;
struct rcu_head rcu;
+
+ //Flag to signal if ruleset is for UID's or GID's
+ enum setid_type type;
};
-enum sid_policy_type _setuid_policy_lookup(struct setuid_ruleset *policy,
- kuid_t src, kuid_t dst);
+enum sid_policy_type _setid_policy_lookup(struct setid_ruleset *policy,
+ kid_t src, kid_t dst);
-extern struct setuid_ruleset __rcu *safesetid_setuid_rules;
+extern struct setid_ruleset __rcu *safesetid_setuid_rules;
+extern struct setid_ruleset __rcu *safesetid_setgid_rules;
#endif /* _SAFESETID_H */
diff --git a/security/safesetid/securityfs.c b/security/safesetid/securityfs.c
index f8bc574..2531046 100644
--- a/security/safesetid/securityfs.c
+++ b/security/safesetid/securityfs.c
@@ -19,22 +19,23 @@
#include "lsm.h"
-static DEFINE_MUTEX(policy_update_lock);
+static DEFINE_MUTEX(uid_policy_update_lock);
+static DEFINE_MUTEX(gid_policy_update_lock);
/*
- * In the case the input buffer contains one or more invalid UIDs, the kuid_t
+ * In the case the input buffer contains one or more invalid IDs, the kid_t
* variables pointed to by @parent and @child will get updated but this
* function will return an error.
* Contents of @buf may be modified.
*/
static int parse_policy_line(struct file *file, char *buf,
- struct setuid_rule *rule)
+ struct setid_rule *rule)
{
char *child_str;
int ret;
u32 parsed_parent, parsed_child;
- /* Format of |buf| string should be <UID>:<UID>. */
+ /* Format of |buf| string should be <UID>:<UID> or <GID>:<GID> */
child_str = strchr(buf, ':');
if (child_str == NULL)
return -EINVAL;
@@ -49,20 +50,29 @@ static int parse_policy_line(struct file *file, char *buf,
if (ret)
return ret;
- rule->src_uid = make_kuid(file->f_cred->user_ns, parsed_parent);
- rule->dst_uid = make_kuid(file->f_cred->user_ns, parsed_child);
- if (!uid_valid(rule->src_uid) || !uid_valid(rule->dst_uid))
+ if (rule->type == UID){
+ rule->src_id.uid = make_kuid(file->f_cred->user_ns, parsed_parent);
+ rule->dst_id.uid = make_kuid(file->f_cred->user_ns, parsed_child);
+ if (!uid_valid(rule->src_id.uid) || !uid_valid(rule->dst_id.uid))
+ return -EINVAL;
+ } else if (rule->type == GID){
+ rule->src_id.gid = make_kgid(file->f_cred->user_ns, parsed_parent);
+ rule->dst_id.gid = make_kgid(file->f_cred->user_ns, parsed_child);
+ if (!gid_valid(rule->src_id.gid) || !gid_valid(rule->dst_id.gid))
+ return -EINVAL;
+ } else {
+ /* Error, rule->type is an invalid type */
return -EINVAL;
-
+ }
return 0;
}
static void __release_ruleset(struct rcu_head *rcu)
{
- struct setuid_ruleset *pol =
- container_of(rcu, struct setuid_ruleset, rcu);
+ struct setid_ruleset *pol =
+ container_of(rcu, struct setid_ruleset, rcu);
int bucket;
- struct setuid_rule *rule;
+ struct setid_rule *rule;
struct hlist_node *tmp;
hash_for_each_safe(pol->rules, bucket, tmp, rule, next)
@@ -71,36 +81,55 @@ static void __release_ruleset(struct rcu_head *rcu)
kfree(pol);
}
-static void release_ruleset(struct setuid_ruleset *pol)
-{
+static void release_ruleset(struct setid_ruleset *pol){
call_rcu(&pol->rcu, __release_ruleset);
}
-static void insert_rule(struct setuid_ruleset *pol, struct setuid_rule *rule)
+static void insert_rule(struct setid_ruleset *pol, struct setid_rule *rule)
{
- hash_add(pol->rules, &rule->next, __kuid_val(rule->src_uid));
+ if (pol->type == UID)
+ hash_add(pol->rules, &rule->next, __kuid_val(rule->src_id.uid));
+ else if (pol->type == GID)
+ hash_add(pol->rules, &rule->next, __kgid_val(rule->src_id.gid));
+ else /* Error, pol->type is neither UID or GID */
+ return;
}
-static int verify_ruleset(struct setuid_ruleset *pol)
+static int verify_ruleset(struct setid_ruleset *pol)
{
int bucket;
- struct setuid_rule *rule, *nrule;
+ struct setid_rule *rule, *nrule;
int res = 0;
hash_for_each(pol->rules, bucket, rule, next) {
- if (_setuid_policy_lookup(pol, rule->dst_uid, INVALID_UID) ==
- SIDPOL_DEFAULT) {
- pr_warn("insecure policy detected: uid %d is constrained but transitively unconstrained through uid %d\n",
- __kuid_val(rule->src_uid),
- __kuid_val(rule->dst_uid));
+ if (_setid_policy_lookup(pol, rule->dst_id, INVALID_ID) == SIDPOL_DEFAULT) {
+ if (pol->type == UID) {
+ pr_warn("insecure policy detected: uid %d is constrained but transitively unconstrained through uid %d\n",
+ __kuid_val(rule->src_id.uid),
+ __kuid_val(rule->dst_id.uid));
+ } else if (pol->type == GID) {
+ pr_warn("insecure policy detected: gid %d is constrained but transitively unconstrained through gid %d\n",
+ __kgid_val(rule->src_id.gid),
+ __kgid_val(rule->dst_id.gid));
+ } else { /* pol->type is an invalid type */
+ res = -EINVAL;
+ return res;
+ }
res = -EINVAL;
/* fix it up */
- nrule = kmalloc(sizeof(struct setuid_rule), GFP_KERNEL);
+ nrule = kmalloc(sizeof(struct setid_rule), GFP_KERNEL);
if (!nrule)
return -ENOMEM;
- nrule->src_uid = rule->dst_uid;
- nrule->dst_uid = rule->dst_uid;
+ if (pol->type == UID){
+ nrule->src_id.uid = rule->dst_id.uid;
+ nrule->dst_id.uid = rule->dst_id.uid;
+ nrule->type = UID;
+ } else { /* pol->type must be GID if we've made it to here */
+ nrule->src_id.gid = rule->dst_id.gid;
+ nrule->dst_id.gid = rule->dst_id.gid;
+ nrule->type = GID;
+ }
insert_rule(pol, nrule);
}
}
@@ -108,16 +137,17 @@ static int verify_ruleset(struct setuid_ruleset *pol)
}
static ssize_t handle_policy_update(struct file *file,
- const char __user *ubuf, size_t len)
+ const char __user *ubuf, size_t len, enum setid_type policy_type)
{
- struct setuid_ruleset *pol;
+ struct setid_ruleset *pol;
char *buf, *p, *end;
int err;
- pol = kmalloc(sizeof(struct setuid_ruleset), GFP_KERNEL);
+ pol = kmalloc(sizeof(struct setid_ruleset), GFP_KERNEL);
if (!pol)
return -ENOMEM;
pol->policy_str = NULL;
+ pol->type = policy_type;
hash_init(pol->rules);
p = buf = memdup_user_nul(ubuf, len);
@@ -133,7 +163,7 @@ static ssize_t handle_policy_update(struct file *file,
/* policy lines, including the last one, end with \n */
while (*p != '\0') {
- struct setuid_rule *rule;
+ struct setid_rule *rule;
end = strchr(p, '\n');
if (end == NULL) {
@@ -142,18 +172,18 @@ static ssize_t handle_policy_update(struct file *file,
}
*end = '\0';
- rule = kmalloc(sizeof(struct setuid_rule), GFP_KERNEL);
+ rule = kmalloc(sizeof(struct setid_rule), GFP_KERNEL);
if (!rule) {
err = -ENOMEM;
goto out_free_buf;
}
+ rule->type = policy_type;
err = parse_policy_line(file, p, rule);
if (err)
goto out_free_rule;
- if (_setuid_policy_lookup(pol, rule->src_uid, rule->dst_uid) ==
- SIDPOL_ALLOWED) {
+ if (_setid_policy_lookup(pol, rule->src_id, rule->dst_id) == SIDPOL_ALLOWED) {
pr_warn("bad policy: duplicate entry\n");
err = -EEXIST;
goto out_free_rule;
@@ -178,21 +208,31 @@ static ssize_t handle_policy_update(struct file *file,
* What we really want here is an xchg() wrapper for RCU, but since that
* doesn't currently exist, just use a spinlock for now.
*/
- mutex_lock(&policy_update_lock);
- pol = rcu_replace_pointer(safesetid_setuid_rules, pol,
- lockdep_is_held(&policy_update_lock));
- mutex_unlock(&policy_update_lock);
+ if (policy_type == UID) {
+ mutex_lock(&uid_policy_update_lock);
+ pol = rcu_replace_pointer(safesetid_setuid_rules, pol,
+ lockdep_is_held(&uid_policy_update_lock));
+ mutex_unlock(&uid_policy_update_lock);
+ } else if (policy_type == GID) {
+ mutex_lock(&gid_policy_update_lock);
+ pol = rcu_replace_pointer(safesetid_setgid_rules, pol,
+ lockdep_is_held(&gid_policy_update_lock));
+ mutex_unlock(&gid_policy_update_lock);
+ } else {
+ /* Error, policy type is neither UID or GID */
+ pr_warn("error: bad policy type");
+ }
err = len;
out_free_buf:
kfree(buf);
out_free_pol:
if (pol)
- release_ruleset(pol);
+ release_ruleset(pol);
return err;
}
-static ssize_t safesetid_file_write(struct file *file,
+static ssize_t safesetid_uid_file_write(struct file *file,
const char __user *buf,
size_t len,
loff_t *ppos)
@@ -203,38 +243,74 @@ static ssize_t safesetid_file_write(struct file *file,
if (*ppos != 0)
return -EINVAL;
- return handle_policy_update(file, buf, len);
+ return handle_policy_update(file, buf, len, UID);
+}
+
+static ssize_t safesetid_gid_file_write(struct file *file,
+ const char __user *buf,
+ size_t len,
+ loff_t *ppos)
+{
+ if (!file_ns_capable(file, &init_user_ns, CAP_MAC_ADMIN))
+ return -EPERM;
+
+ if (*ppos != 0)
+ return -EINVAL;
+
+ return handle_policy_update(file, buf, len, GID);
}
static ssize_t safesetid_file_read(struct file *file, char __user *buf,
- size_t len, loff_t *ppos)
+ size_t len, loff_t *ppos, struct mutex *policy_update_lock, struct __rcu setid_ruleset* ruleset)
{
ssize_t res = 0;
- struct setuid_ruleset *pol;
+ struct setid_ruleset *pol;
const char *kbuf;
- mutex_lock(&policy_update_lock);
- pol = rcu_dereference_protected(safesetid_setuid_rules,
- lockdep_is_held(&policy_update_lock));
+ mutex_lock(policy_update_lock);
+ pol = rcu_dereference_protected(ruleset, lockdep_is_held(policy_update_lock));
if (pol) {
kbuf = pol->policy_str;
res = simple_read_from_buffer(buf, len, ppos,
kbuf, strlen(kbuf));
}
- mutex_unlock(&policy_update_lock);
+ mutex_unlock(policy_update_lock);
+
return res;
}
-static const struct file_operations safesetid_file_fops = {
- .read = safesetid_file_read,
- .write = safesetid_file_write,
+static ssize_t safesetid_uid_file_read(struct file *file, char __user *buf,
+ size_t len, loff_t *ppos)
+{
+ return safesetid_file_read(file, buf, len, ppos,
+ &uid_policy_update_lock, safesetid_setuid_rules);
+}
+
+static ssize_t safesetid_gid_file_read(struct file *file, char __user *buf,
+ size_t len, loff_t *ppos)
+{
+ return safesetid_file_read(file, buf, len, ppos,
+ &gid_policy_update_lock, safesetid_setgid_rules);
+}
+
+
+
+static const struct file_operations safesetid_uid_file_fops = {
+ .read = safesetid_uid_file_read,
+ .write = safesetid_uid_file_write,
+};
+
+static const struct file_operations safesetid_gid_file_fops = {
+ .read = safesetid_gid_file_read,
+ .write = safesetid_gid_file_write,
};
static int __init safesetid_init_securityfs(void)
{
int ret;
struct dentry *policy_dir;
- struct dentry *policy_file;
+ struct dentry *uid_policy_file;
+ struct dentry *gid_policy_file;
if (!safesetid_initialized)
return 0;
@@ -245,13 +321,21 @@ static int __init safesetid_init_securityfs(void)
goto error;
}
- policy_file = securityfs_create_file("whitelist_policy", 0600,
- policy_dir, NULL, &safesetid_file_fops);
- if (IS_ERR(policy_file)) {
- ret = PTR_ERR(policy_file);
+ uid_policy_file = securityfs_create_file("uid_allowlist_policy", 0600,
+ policy_dir, NULL, &safesetid_uid_file_fops);
+ if (IS_ERR(uid_policy_file)) {
+ ret = PTR_ERR(uid_policy_file);
goto error;
}
+ gid_policy_file = securityfs_create_file("gid_allowlist_policy", 0600,
+ policy_dir, NULL, &safesetid_gid_file_fops);
+ if (IS_ERR(gid_policy_file)) {
+ ret = PTR_ERR(gid_policy_file);
+ goto error;
+ }
+
+
return 0;
error:
diff --git a/sound/pci/hda/hda_jack.c b/sound/pci/hda/hda_jack.c
index ded4813..5880594 100644
--- a/sound/pci/hda/hda_jack.c
+++ b/sound/pci/hda/hda_jack.c
@@ -275,16 +275,21 @@ int snd_hda_jack_detect_state_mst(struct hda_codec *codec,
}
EXPORT_SYMBOL_GPL(snd_hda_jack_detect_state_mst);
-static bool func_is_already_in_callback_list(struct hda_jack_tbl *jack,
- hda_jack_callback_fn func)
+static struct hda_jack_callback *
+find_callback_from_list(struct hda_jack_tbl *jack,
+ hda_jack_callback_fn func)
{
struct hda_jack_callback *cb;
+ if (!func)
+ return NULL;
+
for (cb = jack->callback; cb; cb = cb->next) {
if (cb->func == func)
- return true;
+ return cb;
}
- return false;
+
+ return NULL;
}
/**
@@ -309,7 +314,10 @@ snd_hda_jack_detect_enable_callback_mst(struct hda_codec *codec, hda_nid_t nid,
jack = snd_hda_jack_tbl_new(codec, nid, dev_id);
if (!jack)
return ERR_PTR(-ENOMEM);
- if (func && !func_is_already_in_callback_list(jack, func)) {
+
+ callback = find_callback_from_list(jack, func);
+
+ if (func && !callback) {
callback = kzalloc(sizeof(*callback), GFP_KERNEL);
if (!callback)
return ERR_PTR(-ENOMEM);
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index 2b38b2a..e0c38f2 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -7910,8 +7910,12 @@ static void ae7_post_dsp_asi_stream_setup(struct hda_codec *codec)
static void ae7_post_dsp_pll_setup(struct hda_codec *codec)
{
- const unsigned int addr[] = { 0x41, 0x45, 0x40, 0x43, 0x51 };
- const unsigned int data[] = { 0xc8, 0xcc, 0xcb, 0xc7, 0x8d };
+ static const unsigned int addr[] = {
+ 0x41, 0x45, 0x40, 0x43, 0x51
+ };
+ static const unsigned int data[] = {
+ 0xc8, 0xcc, 0xcb, 0xc7, 0x8d
+ };
unsigned int i;
for (i = 0; i < ARRAY_SIZE(addr); i++) {
@@ -7925,10 +7929,12 @@ static void ae7_post_dsp_pll_setup(struct hda_codec *codec)
static void ae7_post_dsp_asi_setup_ports(struct hda_codec *codec)
{
struct ca0132_spec *spec = codec->spec;
- const unsigned int target[] = { 0x0b, 0x04, 0x06, 0x0a, 0x0c, 0x11,
- 0x12, 0x13, 0x14 };
- const unsigned int data[] = { 0x12, 0x00, 0x48, 0x05, 0x5f, 0xff,
- 0xff, 0xff, 0x7f };
+ static const unsigned int target[] = {
+ 0x0b, 0x04, 0x06, 0x0a, 0x0c, 0x11, 0x12, 0x13, 0x14
+ };
+ static const unsigned int data[] = {
+ 0x12, 0x00, 0x48, 0x05, 0x5f, 0xff, 0xff, 0xff, 0x7f
+ };
unsigned int i;
mutex_lock(&spec->chipio_mutex);
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 1431be4..a2221eb 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
menuconfig SND_SOC_SAMSUNG
tristate "ASoC support for Samsung"
- depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
depends on COMMON_CLK
select SND_SOC_GENERIC_DMAENGINE_PCM
help
diff --git a/sound/soc/samsung/s3c2412-i2s.c b/sound/soc/samsung/s3c2412-i2s.c
index edfa9d1..81f416a 100644
--- a/sound/soc/samsung/s3c2412-i2s.c
+++ b/sound/soc/samsung/s3c2412-i2s.c
@@ -19,9 +19,6 @@
#include <sound/soc.h>
#include <sound/pcm_params.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
-
#include "dma.h"
#include "regs-i2s-v2.h"
#include "s3c2412-i2s.h"
@@ -70,10 +67,6 @@ static int s3c2412_i2s_probe(struct snd_soc_dai *dai)
if (ret)
goto err;
- /* Configure the I2S pins (GPE0...GPE4) in correct mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
-
return 0;
err:
diff --git a/sound/soc/samsung/s3c24xx-i2s.c b/sound/soc/samsung/s3c24xx-i2s.c
index 60bfaed..50c0800 100644
--- a/sound/soc/samsung/s3c24xx-i2s.c
+++ b/sound/soc/samsung/s3c24xx-i2s.c
@@ -18,10 +18,7 @@
#include <sound/soc.h>
#include <sound/pcm_params.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
#include "regs-iis.h"
-
#include "dma.h"
#include "s3c24xx-i2s.h"
@@ -348,10 +345,6 @@ static int s3c24xx_i2s_probe(struct snd_soc_dai *dai)
if (ret)
return ret;
- /* Configure the I2S pins (GPE0...GPE4) in correct mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
-
writel(S3C2410_IISCON_IISEN, s3c24xx_i2s.regs + S3C2410_IISCON);
s3c24xx_snd_txctrl(0);
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index 913adc8..5a6fb66 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -620,7 +620,7 @@ A circular command buffer is used here. A new command is being added
while another can be executed. The scheme works by adding two WAIT commands
after each sent batch of commands. When the next batch is prepared it is
added after the WAIT commands then the WAITs are replaced with single JUMP
-command to the new batch. The the DBRI is forced to reread the last WAIT
+command to the new batch. Then the DBRI is forced to reread the last WAIT
command (replaced by the JUMP by then). If the DBRI is still executing
previous commands the request to reread the WAIT command is ignored.
diff --git a/sound/usb/format.c b/sound/usb/format.c
index 1b28d01..3bfead3 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -406,6 +406,7 @@ static int line6_parse_audio_format_rates_quirk(struct snd_usb_audio *chip,
case USB_ID(0x0e41, 0x4242): /* Line6 Helix Rack */
case USB_ID(0x0e41, 0x4244): /* Line6 Helix LT */
case USB_ID(0x0e41, 0x4246): /* Line6 HX-Stomp */
+ case USB_ID(0x0e41, 0x4247): /* Line6 Pod Go */
case USB_ID(0x0e41, 0x4248): /* Line6 Helix >= fw 2.82 */
case USB_ID(0x0e41, 0x4249): /* Line6 Helix Rack >= fw 2.82 */
case USB_ID(0x0e41, 0x424a): /* Line6 Helix LT >= fw 2.82 */
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index bf5a99d..e6ceac3 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -3677,15 +3677,19 @@ union bpf_attr {
* Return
* The id is returned or 0 in case the id could not be retrieved.
*
- * long bpf_redirect_neigh(u32 ifindex, u64 flags)
+ * long bpf_redirect_neigh(u32 ifindex, struct bpf_redir_neigh *params, int plen, u64 flags)
* Description
* Redirect the packet to another net device of index *ifindex*
* and fill in L2 addresses from neighboring subsystem. This helper
* is somewhat similar to **bpf_redirect**\ (), except that it
* populates L2 addresses as well, meaning, internally, the helper
- * performs a FIB lookup based on the skb's networking header to
- * get the address of the next hop and then relies on the neighbor
- * lookup for the L2 address of the nexthop.
+ * relies on the neighbor lookup for the L2 address of the nexthop.
+ *
+ * The helper will perform a FIB lookup based on the skb's
+ * networking header to get the address of the next hop, unless
+ * this is supplied by the caller in the *params* argument. The
+ * *plen* argument indicates the len of *params* and should be set
+ * to 0 if *params* is NULL.
*
* The *flags* argument is reserved and must be 0. The helper is
* currently only supported for tc BPF program types, and enabled
@@ -4906,6 +4910,16 @@ struct bpf_fib_lookup {
__u8 dmac[6]; /* ETH_ALEN */
};
+struct bpf_redir_neigh {
+ /* network family for lookup (AF_INET, AF_INET6) */
+ __u32 nh_family;
+ /* network address of nexthop; skips fib lookup to find gateway */
+ union {
+ __be32 ipv4_nh;
+ __u32 ipv6_nh[4]; /* in6_addr; network order */
+ };
+};
+
enum bpf_task_fd_type {
BPF_FD_TYPE_RAW_TRACEPOINT, /* tp name */
BPF_FD_TYPE_TRACEPOINT, /* tp name */
diff --git a/tools/lib/bpf/bpf_helpers.h b/tools/lib/bpf/bpf_helpers.h
index 2bdb7d6..72b2511 100644
--- a/tools/lib/bpf/bpf_helpers.h
+++ b/tools/lib/bpf/bpf_helpers.h
@@ -72,6 +72,7 @@
/*
* Helper function to perform a tail call with a constant/immediate map slot.
*/
+#if __clang_major__ >= 8 && defined(__bpf__)
static __always_inline void
bpf_tail_call_static(void *ctx, const void *map, const __u32 slot)
{
@@ -98,6 +99,7 @@ bpf_tail_call_static(void *ctx, const void *map, const __u32 slot)
:: [ctx]"r"(ctx), [map]"r"(map), [slot]"i"(slot)
: "r0", "r1", "r2", "r3", "r4", "r5");
}
+#endif
/*
* Helper structure used by eBPF C program
diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile
index c862249..c7bcddb 100644
--- a/tools/power/cpupower/Makefile
+++ b/tools/power/cpupower/Makefile
@@ -51,7 +51,7 @@
# Package-related definitions. Distributions can modify the version
# and _should_ modify the PACKAGE_BUGREPORT definition
-VERSION= $(shell ./utils/version-gen.sh)
+VERSION:= $(shell ./utils/version-gen.sh)
LIB_MAJ= 0.0.1
LIB_MIN= 0
diff --git a/tools/power/cpupower/debug/i386/intel_gsic.c b/tools/power/cpupower/debug/i386/intel_gsic.c
index e5e926f..befd837 100644
--- a/tools/power/cpupower/debug/i386/intel_gsic.c
+++ b/tools/power/cpupower/debug/i386/intel_gsic.c
@@ -71,7 +71,7 @@ int main (void)
printf("\tsmi_cmd=0x?? smi_port=0x?? smi_sig=1\n");
printf("\nUnfortunately, you have to know what exactly are "
"smi_cmd and smi_port, and this\nis system "
- "dependant.\n");
+ "dependent.\n");
}
return 1;
}
diff --git a/tools/testing/selftests/bpf/prog_tests/ksyms_btf.c b/tools/testing/selftests/bpf/prog_tests/ksyms_btf.c
index 28e26bd3..b58b775 100644
--- a/tools/testing/selftests/bpf/prog_tests/ksyms_btf.c
+++ b/tools/testing/selftests/bpf/prog_tests/ksyms_btf.c
@@ -5,18 +5,17 @@
#include <bpf/libbpf.h>
#include <bpf/btf.h>
#include "test_ksyms_btf.skel.h"
+#include "test_ksyms_btf_null_check.skel.h"
static int duration;
-void test_ksyms_btf(void)
+static void test_basic(void)
{
__u64 runqueues_addr, bpf_prog_active_addr;
__u32 this_rq_cpu;
int this_bpf_prog_active;
struct test_ksyms_btf *skel = NULL;
struct test_ksyms_btf__data *data;
- struct btf *btf;
- int percpu_datasec;
int err;
err = kallsyms_find("runqueues", &runqueues_addr);
@@ -31,20 +30,6 @@ void test_ksyms_btf(void)
if (CHECK(err == -ENOENT, "ksym_find", "symbol 'bpf_prog_active' not found\n"))
return;
- btf = libbpf_find_kernel_btf();
- if (CHECK(IS_ERR(btf), "btf_exists", "failed to load kernel BTF: %ld\n",
- PTR_ERR(btf)))
- return;
-
- percpu_datasec = btf__find_by_name_kind(btf, ".data..percpu",
- BTF_KIND_DATASEC);
- if (percpu_datasec < 0) {
- printf("%s:SKIP:no PERCPU DATASEC in kernel btf\n",
- __func__);
- test__skip();
- goto cleanup;
- }
-
skel = test_ksyms_btf__open_and_load();
if (CHECK(!skel, "skel_open", "failed to open and load skeleton\n"))
goto cleanup;
@@ -83,6 +68,42 @@ void test_ksyms_btf(void)
data->out__bpf_prog_active);
cleanup:
- btf__free(btf);
test_ksyms_btf__destroy(skel);
}
+
+static void test_null_check(void)
+{
+ struct test_ksyms_btf_null_check *skel;
+
+ skel = test_ksyms_btf_null_check__open_and_load();
+ CHECK(skel, "skel_open", "unexpected load of a prog missing null check\n");
+
+ test_ksyms_btf_null_check__destroy(skel);
+}
+
+void test_ksyms_btf(void)
+{
+ int percpu_datasec;
+ struct btf *btf;
+
+ btf = libbpf_find_kernel_btf();
+ if (CHECK(IS_ERR(btf), "btf_exists", "failed to load kernel BTF: %ld\n",
+ PTR_ERR(btf)))
+ return;
+
+ percpu_datasec = btf__find_by_name_kind(btf, ".data..percpu",
+ BTF_KIND_DATASEC);
+ btf__free(btf);
+ if (percpu_datasec < 0) {
+ printf("%s:SKIP:no PERCPU DATASEC in kernel btf\n",
+ __func__);
+ test__skip();
+ return;
+ }
+
+ if (test__start_subtest("basic"))
+ test_basic();
+
+ if (test__start_subtest("null_check"))
+ test_null_check();
+}
diff --git a/tools/testing/selftests/bpf/progs/test_ksyms_btf_null_check.c b/tools/testing/selftests/bpf/progs/test_ksyms_btf_null_check.c
new file mode 100644
index 0000000..8bc8f7c
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/test_ksyms_btf_null_check.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2020 Facebook */
+
+#include "vmlinux.h"
+
+#include <bpf/bpf_helpers.h>
+
+extern const struct rq runqueues __ksym; /* struct type global var. */
+extern const int bpf_prog_active __ksym; /* int type global var. */
+
+SEC("raw_tp/sys_enter")
+int handler(const void *ctx)
+{
+ struct rq *rq;
+ int *active;
+ __u32 cpu;
+
+ cpu = bpf_get_smp_processor_id();
+ rq = (struct rq *)bpf_per_cpu_ptr(&runqueues, cpu);
+ active = (int *)bpf_per_cpu_ptr(&bpf_prog_active, cpu);
+ if (active) {
+ /* READ_ONCE */
+ *(volatile int *)active;
+ /* !rq has not been tested, so verifier should reject. */
+ *(volatile int *)(&rq->cpu);
+ }
+
+ return 0;
+}
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/test_tc_neigh.c b/tools/testing/selftests/bpf/progs/test_tc_neigh.c
index fe18261..b985ac4 100644
--- a/tools/testing/selftests/bpf/progs/test_tc_neigh.c
+++ b/tools/testing/selftests/bpf/progs/test_tc_neigh.c
@@ -1,4 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
+#include <stddef.h>
#include <stdint.h>
#include <stdbool.h>
@@ -118,7 +119,7 @@ SEC("dst_ingress") int tc_dst(struct __sk_buff *skb)
if (bpf_skb_store_bytes(skb, 0, &zero, sizeof(zero), 0) < 0)
return TC_ACT_SHOT;
- return bpf_redirect_neigh(get_dev_ifindex(dev_src), 0);
+ return bpf_redirect_neigh(get_dev_ifindex(dev_src), NULL, 0, 0);
}
SEC("src_ingress") int tc_src(struct __sk_buff *skb)
@@ -142,7 +143,7 @@ SEC("src_ingress") int tc_src(struct __sk_buff *skb)
if (bpf_skb_store_bytes(skb, 0, &zero, sizeof(zero), 0) < 0)
return TC_ACT_SHOT;
- return bpf_redirect_neigh(get_dev_ifindex(dev_dst), 0);
+ return bpf_redirect_neigh(get_dev_ifindex(dev_dst), NULL, 0, 0);
}
char __license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/test_tc_neigh_fib.c b/tools/testing/selftests/bpf/progs/test_tc_neigh_fib.c
new file mode 100644
index 0000000..d82ed34
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/test_tc_neigh_fib.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <stdint.h>
+#include <stdbool.h>
+#include <stddef.h>
+
+#include <linux/bpf.h>
+#include <linux/stddef.h>
+#include <linux/pkt_cls.h>
+#include <linux/if_ether.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_endian.h>
+
+#ifndef ctx_ptr
+# define ctx_ptr(field) (void *)(long)(field)
+#endif
+
+#define AF_INET 2
+#define AF_INET6 10
+
+static __always_inline int fill_fib_params_v4(struct __sk_buff *skb,
+ struct bpf_fib_lookup *fib_params)
+{
+ void *data_end = ctx_ptr(skb->data_end);
+ void *data = ctx_ptr(skb->data);
+ struct iphdr *ip4h;
+
+ if (data + sizeof(struct ethhdr) > data_end)
+ return -1;
+
+ ip4h = (struct iphdr *)(data + sizeof(struct ethhdr));
+ if ((void *)(ip4h + 1) > data_end)
+ return -1;
+
+ fib_params->family = AF_INET;
+ fib_params->tos = ip4h->tos;
+ fib_params->l4_protocol = ip4h->protocol;
+ fib_params->sport = 0;
+ fib_params->dport = 0;
+ fib_params->tot_len = bpf_ntohs(ip4h->tot_len);
+ fib_params->ipv4_src = ip4h->saddr;
+ fib_params->ipv4_dst = ip4h->daddr;
+
+ return 0;
+}
+
+static __always_inline int fill_fib_params_v6(struct __sk_buff *skb,
+ struct bpf_fib_lookup *fib_params)
+{
+ struct in6_addr *src = (struct in6_addr *)fib_params->ipv6_src;
+ struct in6_addr *dst = (struct in6_addr *)fib_params->ipv6_dst;
+ void *data_end = ctx_ptr(skb->data_end);
+ void *data = ctx_ptr(skb->data);
+ struct ipv6hdr *ip6h;
+
+ if (data + sizeof(struct ethhdr) > data_end)
+ return -1;
+
+ ip6h = (struct ipv6hdr *)(data + sizeof(struct ethhdr));
+ if ((void *)(ip6h + 1) > data_end)
+ return -1;
+
+ fib_params->family = AF_INET6;
+ fib_params->flowinfo = 0;
+ fib_params->l4_protocol = ip6h->nexthdr;
+ fib_params->sport = 0;
+ fib_params->dport = 0;
+ fib_params->tot_len = bpf_ntohs(ip6h->payload_len);
+ *src = ip6h->saddr;
+ *dst = ip6h->daddr;
+
+ return 0;
+}
+
+SEC("chk_egress") int tc_chk(struct __sk_buff *skb)
+{
+ void *data_end = ctx_ptr(skb->data_end);
+ void *data = ctx_ptr(skb->data);
+ __u32 *raw = data;
+
+ if (data + sizeof(struct ethhdr) > data_end)
+ return TC_ACT_SHOT;
+
+ return !raw[0] && !raw[1] && !raw[2] ? TC_ACT_SHOT : TC_ACT_OK;
+}
+
+static __always_inline int tc_redir(struct __sk_buff *skb)
+{
+ struct bpf_fib_lookup fib_params = { .ifindex = skb->ingress_ifindex };
+ __u8 zero[ETH_ALEN * 2];
+ int ret = -1;
+
+ switch (skb->protocol) {
+ case __bpf_constant_htons(ETH_P_IP):
+ ret = fill_fib_params_v4(skb, &fib_params);
+ break;
+ case __bpf_constant_htons(ETH_P_IPV6):
+ ret = fill_fib_params_v6(skb, &fib_params);
+ break;
+ }
+
+ if (ret)
+ return TC_ACT_OK;
+
+ ret = bpf_fib_lookup(skb, &fib_params, sizeof(fib_params), 0);
+ if (ret == BPF_FIB_LKUP_RET_NOT_FWDED || ret < 0)
+ return TC_ACT_OK;
+
+ __builtin_memset(&zero, 0, sizeof(zero));
+ if (bpf_skb_store_bytes(skb, 0, &zero, sizeof(zero), 0) < 0)
+ return TC_ACT_SHOT;
+
+ if (ret == BPF_FIB_LKUP_RET_NO_NEIGH) {
+ struct bpf_redir_neigh nh_params = {};
+
+ nh_params.nh_family = fib_params.family;
+ __builtin_memcpy(&nh_params.ipv6_nh, &fib_params.ipv6_dst,
+ sizeof(nh_params.ipv6_nh));
+
+ return bpf_redirect_neigh(fib_params.ifindex, &nh_params,
+ sizeof(nh_params), 0);
+
+ } else if (ret == BPF_FIB_LKUP_RET_SUCCESS) {
+ void *data_end = ctx_ptr(skb->data_end);
+ struct ethhdr *eth = ctx_ptr(skb->data);
+
+ if (eth + 1 > data_end)
+ return TC_ACT_SHOT;
+
+ __builtin_memcpy(eth->h_dest, fib_params.dmac, ETH_ALEN);
+ __builtin_memcpy(eth->h_source, fib_params.smac, ETH_ALEN);
+
+ return bpf_redirect(fib_params.ifindex, 0);
+ }
+
+ return TC_ACT_SHOT;
+}
+
+/* these are identical, but keep them separate for compatibility with the
+ * section names expected by test_tc_redirect.sh
+ */
+SEC("dst_ingress") int tc_dst(struct __sk_buff *skb)
+{
+ return tc_redir(skb);
+}
+
+SEC("src_ingress") int tc_src(struct __sk_buff *skb)
+{
+ return tc_redir(skb);
+}
+
+char __license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/test_tc_redirect.sh b/tools/testing/selftests/bpf/test_tc_redirect.sh
index 6d74825..8868aa1 100755
--- a/tools/testing/selftests/bpf/test_tc_redirect.sh
+++ b/tools/testing/selftests/bpf/test_tc_redirect.sh
@@ -24,8 +24,7 @@
{ echo >&2 "timeout is not available"; exit 1; }
command -v ping >/dev/null 2>&1 || \
{ echo >&2 "ping is not available"; exit 1; }
-command -v ping6 >/dev/null 2>&1 || \
- { echo >&2 "ping6 is not available"; exit 1; }
+if command -v ping6 >/dev/null 2>&1; then PING6=ping6; else PING6=ping; fi
command -v perl >/dev/null 2>&1 || \
{ echo >&2 "perl is not available"; exit 1; }
command -v jq >/dev/null 2>&1 || \
@@ -152,7 +151,7 @@
echo -e "${TEST}: ${GREEN}PASS${NC}"
TEST="ICMPv6 connectivity test"
- ip netns exec ${NS_SRC} ping6 $PING_ARG ${IP6_DST}
+ ip netns exec ${NS_SRC} $PING6 $PING_ARG ${IP6_DST}
if [ $? -ne 0 ]; then
echo -e "${TEST}: ${RED}FAIL${NC}"
exit 1
@@ -170,6 +169,7 @@
netns_setup_bpf()
{
local obj=$1
+ local use_forwarding=${2:-0}
ip netns exec ${NS_FWD} tc qdisc add dev veth_src_fwd clsact
ip netns exec ${NS_FWD} tc filter add dev veth_src_fwd ingress bpf da obj $obj sec src_ingress
@@ -179,6 +179,14 @@
ip netns exec ${NS_FWD} tc filter add dev veth_dst_fwd ingress bpf da obj $obj sec dst_ingress
ip netns exec ${NS_FWD} tc filter add dev veth_dst_fwd egress bpf da obj $obj sec chk_egress
+ if [ "$use_forwarding" -eq "1" ]; then
+ # bpf_fib_lookup() checks if forwarding is enabled
+ ip netns exec ${NS_FWD} sysctl -w net.ipv4.ip_forward=1
+ ip netns exec ${NS_FWD} sysctl -w net.ipv6.conf.veth_dst_fwd.forwarding=1
+ ip netns exec ${NS_FWD} sysctl -w net.ipv6.conf.veth_src_fwd.forwarding=1
+ return 0
+ fi
+
veth_src=$(ip netns exec ${NS_FWD} cat /sys/class/net/veth_src_fwd/ifindex)
veth_dst=$(ip netns exec ${NS_FWD} cat /sys/class/net/veth_dst_fwd/ifindex)
@@ -200,5 +208,9 @@
netns_test_connectivity
netns_cleanup
netns_setup
+netns_setup_bpf test_tc_neigh_fib.o 1
+netns_test_connectivity
+netns_cleanup
+netns_setup
netns_setup_bpf test_tc_peer.o
netns_test_connectivity
diff --git a/tools/testing/selftests/bpf/verifier/sock.c b/tools/testing/selftests/bpf/verifier/sock.c
index b1aac26..ce13ece 100644
--- a/tools/testing/selftests/bpf/verifier/sock.c
+++ b/tools/testing/selftests/bpf/verifier/sock.c
@@ -631,3 +631,28 @@
.prog_type = BPF_PROG_TYPE_SK_REUSEPORT,
.result = ACCEPT,
},
+{
+ "mark null check on return value of bpf_skc_to helpers",
+ .insns = {
+ BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_1, offsetof(struct __sk_buff, sk)),
+ BPF_JMP_IMM(BPF_JNE, BPF_REG_1, 0, 2),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ BPF_MOV64_REG(BPF_REG_6, BPF_REG_1),
+ BPF_EMIT_CALL(BPF_FUNC_skc_to_tcp_sock),
+ BPF_MOV64_REG(BPF_REG_7, BPF_REG_0),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_6),
+ BPF_EMIT_CALL(BPF_FUNC_skc_to_tcp_request_sock),
+ BPF_MOV64_REG(BPF_REG_8, BPF_REG_0),
+ BPF_JMP_IMM(BPF_JNE, BPF_REG_8, 0, 2),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_7, 0),
+ BPF_EXIT_INSN(),
+ },
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS,
+ .result = REJECT,
+ .errstr = "invalid mem access",
+ .result_unpriv = REJECT,
+ .errstr_unpriv = "unknown func",
+},
diff --git a/tools/testing/selftests/mount/.gitignore b/tools/testing/selftests/mount/.gitignore
index 0bc64a6..17f2d84 100644
--- a/tools/testing/selftests/mount/.gitignore
+++ b/tools/testing/selftests/mount/.gitignore
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
unprivileged-remount-test
+nosymfollow-test
diff --git a/tools/testing/selftests/mount/Makefile b/tools/testing/selftests/mount/Makefile
index 0268907..2d94548 100644
--- a/tools/testing/selftests/mount/Makefile
+++ b/tools/testing/selftests/mount/Makefile
@@ -3,7 +3,7 @@
CFLAGS = -Wall \
-O2
-TEST_PROGS := run_tests.sh
-TEST_GEN_FILES := unprivileged-remount-test
+TEST_PROGS := run_unprivileged_remount.sh run_nosymfollow.sh
+TEST_GEN_FILES := unprivileged-remount-test nosymfollow-test
include ../lib.mk
diff --git a/tools/testing/selftests/mount/nosymfollow-test.c b/tools/testing/selftests/mount/nosymfollow-test.c
new file mode 100644
index 0000000..650d6d8
--- /dev/null
+++ b/tools/testing/selftests/mount/nosymfollow-test.c
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0
+#define _GNU_SOURCE
+#include <errno.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <sched.h>
+#include <stdarg.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/mount.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <sys/vfs.h>
+#include <unistd.h>
+
+#ifndef MS_NOSYMFOLLOW
+# define MS_NOSYMFOLLOW 256 /* Do not follow symlinks */
+#endif
+
+#ifndef ST_NOSYMFOLLOW
+# define ST_NOSYMFOLLOW 0x2000 /* Do not follow symlinks */
+#endif
+
+#define DATA "/tmp/data"
+#define LINK "/tmp/symlink"
+#define TMP "/tmp"
+
+static void die(char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ vfprintf(stderr, fmt, ap);
+ va_end(ap);
+ exit(EXIT_FAILURE);
+}
+
+static void vmaybe_write_file(bool enoent_ok, char *filename, char *fmt,
+ va_list ap)
+{
+ ssize_t written;
+ char buf[4096];
+ int buf_len;
+ int fd;
+
+ buf_len = vsnprintf(buf, sizeof(buf), fmt, ap);
+ if (buf_len < 0)
+ die("vsnprintf failed: %s\n", strerror(errno));
+
+ if (buf_len >= sizeof(buf))
+ die("vsnprintf output truncated\n");
+
+ fd = open(filename, O_WRONLY);
+ if (fd < 0) {
+ if ((errno == ENOENT) && enoent_ok)
+ return;
+ die("open of %s failed: %s\n", filename, strerror(errno));
+ }
+
+ written = write(fd, buf, buf_len);
+ if (written != buf_len) {
+ if (written >= 0) {
+ die("short write to %s\n", filename);
+ } else {
+ die("write to %s failed: %s\n",
+ filename, strerror(errno));
+ }
+ }
+
+ if (close(fd) != 0)
+ die("close of %s failed: %s\n", filename, strerror(errno));
+}
+
+static void maybe_write_file(char *filename, char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ vmaybe_write_file(true, filename, fmt, ap);
+ va_end(ap);
+}
+
+static void write_file(char *filename, char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ vmaybe_write_file(false, filename, fmt, ap);
+ va_end(ap);
+}
+
+static void create_and_enter_ns(void)
+{
+ uid_t uid = getuid();
+ gid_t gid = getgid();
+
+ if (unshare(CLONE_NEWUSER) != 0)
+ die("unshare(CLONE_NEWUSER) failed: %s\n", strerror(errno));
+
+ maybe_write_file("/proc/self/setgroups", "deny");
+ write_file("/proc/self/uid_map", "0 %d 1", uid);
+ write_file("/proc/self/gid_map", "0 %d 1", gid);
+
+ if (setgid(0) != 0)
+ die("setgid(0) failed %s\n", strerror(errno));
+ if (setuid(0) != 0)
+ die("setuid(0) failed %s\n", strerror(errno));
+
+ if (unshare(CLONE_NEWNS) != 0)
+ die("unshare(CLONE_NEWNS) failed: %s\n", strerror(errno));
+}
+
+static void setup_symlink(void)
+{
+ int data, err;
+
+ data = creat(DATA, O_RDWR);
+ if (data < 0)
+ die("creat failed: %s\n", strerror(errno));
+
+ err = symlink(DATA, LINK);
+ if (err < 0)
+ die("symlink failed: %s\n", strerror(errno));
+
+ if (close(data) != 0)
+ die("close of %s failed: %s\n", DATA, strerror(errno));
+}
+
+static void test_link_traversal(bool nosymfollow)
+{
+ int link;
+
+ link = open(LINK, 0, O_RDWR);
+ if (nosymfollow) {
+ if ((link != -1 || errno != ELOOP)) {
+ die("link traversal unexpected result: %d, %s\n",
+ link, strerror(errno));
+ }
+ } else {
+ if (link < 0)
+ die("link traversal failed: %s\n", strerror(errno));
+
+ if (close(link) != 0)
+ die("close of link failed: %s\n", strerror(errno));
+ }
+}
+
+static void test_readlink(void)
+{
+ char buf[4096];
+ ssize_t ret;
+
+ bzero(buf, sizeof(buf));
+
+ ret = readlink(LINK, buf, sizeof(buf));
+ if (ret < 0)
+ die("readlink failed: %s\n", strerror(errno));
+ if (strcmp(buf, DATA) != 0)
+ die("readlink strcmp failed: '%s' '%s'\n", buf, DATA);
+}
+
+static void test_realpath(void)
+{
+ char *path = realpath(LINK, NULL);
+
+ if (!path)
+ die("realpath failed: %s\n", strerror(errno));
+ if (strcmp(path, DATA) != 0)
+ die("realpath strcmp failed\n");
+
+ free(path);
+}
+
+static void test_statfs(bool nosymfollow)
+{
+ struct statfs buf;
+ int ret;
+
+ ret = statfs(TMP, &buf);
+ if (ret)
+ die("statfs failed: %s\n", strerror(errno));
+
+ if (nosymfollow) {
+ if ((buf.f_flags & ST_NOSYMFOLLOW) == 0)
+ die("ST_NOSYMFOLLOW not set on %s\n", TMP);
+ } else {
+ if ((buf.f_flags & ST_NOSYMFOLLOW) != 0)
+ die("ST_NOSYMFOLLOW set on %s\n", TMP);
+ }
+}
+
+static void run_tests(bool nosymfollow)
+{
+ test_link_traversal(nosymfollow);
+ test_readlink();
+ test_realpath();
+ test_statfs(nosymfollow);
+}
+
+int main(int argc, char **argv)
+{
+ create_and_enter_ns();
+
+ if (mount("testing", TMP, "ramfs", 0, NULL) != 0)
+ die("mount failed: %s\n", strerror(errno));
+
+ setup_symlink();
+ run_tests(false);
+
+ if (mount("testing", TMP, "ramfs", MS_REMOUNT|MS_NOSYMFOLLOW, NULL) != 0)
+ die("remount failed: %s\n", strerror(errno));
+
+ run_tests(true);
+
+ return EXIT_SUCCESS;
+}
diff --git a/tools/testing/selftests/mount/run_nosymfollow.sh b/tools/testing/selftests/mount/run_nosymfollow.sh
new file mode 100755
index 0000000..5fbbf03
--- /dev/null
+++ b/tools/testing/selftests/mount/run_nosymfollow.sh
@@ -0,0 +1,4 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+./nosymfollow-test
diff --git a/tools/testing/selftests/mount/run_tests.sh b/tools/testing/selftests/mount/run_unprivileged_remount.sh
similarity index 100%
rename from tools/testing/selftests/mount/run_tests.sh
rename to tools/testing/selftests/mount/run_unprivileged_remount.sh
diff --git a/tools/testing/selftests/net/config b/tools/testing/selftests/net/config
index 4364924..4d5df8e 100644
--- a/tools/testing/selftests/net/config
+++ b/tools/testing/selftests/net/config
@@ -33,3 +33,4 @@
CONFIG_TRACEPOINTS=y
CONFIG_NET_DROP_MONITOR=m
CONFIG_NETDEVSIM=m
+CONFIG_NET_FOU=m
diff --git a/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh b/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh
index a0b5f57..0727e20 100755
--- a/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh
+++ b/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh
@@ -215,10 +215,16 @@
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+
+ sysctl_set net.ipv4.conf.all.rp_filter 0
+ sysctl_set net.ipv4.conf.vlan10-v.rp_filter 0
+ sysctl_set net.ipv4.conf.vlan20-v.rp_filter 0
}
switch_destroy()
{
+ sysctl_restore net.ipv4.conf.all.rp_filter
+
bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 20
bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 10
@@ -359,6 +365,10 @@
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+
+ sysctl_set net.ipv4.conf.all.rp_filter 0
+ sysctl_set net.ipv4.conf.vlan10-v.rp_filter 0
+ sysctl_set net.ipv4.conf.vlan20-v.rp_filter 0
}
export -f ns_switch_create
diff --git a/tools/testing/selftests/net/forwarding/vxlan_symmetric.sh b/tools/testing/selftests/net/forwarding/vxlan_symmetric.sh
index 1209031..5d97fa3 100755
--- a/tools/testing/selftests/net/forwarding/vxlan_symmetric.sh
+++ b/tools/testing/selftests/net/forwarding/vxlan_symmetric.sh
@@ -237,10 +237,16 @@
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+
+ sysctl_set net.ipv4.conf.all.rp_filter 0
+ sysctl_set net.ipv4.conf.vlan10-v.rp_filter 0
+ sysctl_set net.ipv4.conf.vlan20-v.rp_filter 0
}
switch_destroy()
{
+ sysctl_restore net.ipv4.conf.all.rp_filter
+
bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 20
bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 10
@@ -402,6 +408,10 @@
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+
+ sysctl_set net.ipv4.conf.all.rp_filter 0
+ sysctl_set net.ipv4.conf.vlan10-v.rp_filter 0
+ sysctl_set net.ipv4.conf.vlan20-v.rp_filter 0
}
export -f ns_switch_create
diff --git a/tools/testing/selftests/net/mptcp/config b/tools/testing/selftests/net/mptcp/config
index 8df5cb8..741a1c4 100644
--- a/tools/testing/selftests/net/mptcp/config
+++ b/tools/testing/selftests/net/mptcp/config
@@ -1,4 +1,5 @@
CONFIG_MPTCP=y
+CONFIG_IPV6=y
CONFIG_MPTCP_IPV6=y
CONFIG_INET_DIAG=m
CONFIG_INET_MPTCP_DIAG=m
diff --git a/tools/testing/selftests/net/rtnetlink.sh b/tools/testing/selftests/net/rtnetlink.sh
index 8a2fe6d..c9ce3df 100755
--- a/tools/testing/selftests/net/rtnetlink.sh
+++ b/tools/testing/selftests/net/rtnetlink.sh
@@ -520,6 +520,11 @@
return $ksft_skip
fi
+ if ! /sbin/modprobe -q -n fou; then
+ echo "SKIP: module fou is not found"
+ return $ksft_skip
+ fi
+ /sbin/modprobe -q fou
ip -netns "$testns" fou add port 7777 ipproto 47 2>/dev/null
if [ $? -ne 0 ];then
echo "FAIL: can't add fou port 7777, skipping test"
diff --git a/tools/testing/selftests/powerpc/alignment/alignment_handler.c b/tools/testing/selftests/powerpc/alignment/alignment_handler.c
index 2a0503b..cb53a8b 100644
--- a/tools/testing/selftests/powerpc/alignment/alignment_handler.c
+++ b/tools/testing/selftests/powerpc/alignment/alignment_handler.c
@@ -266,8 +266,12 @@ int do_test(char *test_name, void (*test_func)(char *, char *))
}
rc = 0;
- /* offset = 0 no alignment fault, so skip */
- for (offset = 1; offset < 16; offset++) {
+ /*
+ * offset = 0 is aligned but tests the workaround for the P9N
+ * DD2.1 vector CI load issue (see 5080332c2c89 "powerpc/64s:
+ * Add workaround for P9 vector CI load issue")
+ */
+ for (offset = 0; offset < 16; offset++) {
width = 16; /* vsx == 16 bytes */
r = 0;