scsi: pm8001: Clean up kernel-doc and comments
Fix kernel-doc warnings then test again, wash, rinse, find more, then
repeat more/again.
Also fix spellos, some grammar, and some punctuation.
../drivers/scsi/pm8001/pm8001_ctl.c:557: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
** pm8001_ctl_fatal_log_show - fatal error logging
../drivers/scsi/pm8001/pm8001_ctl.c:577: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
** non_fatal_log_show - non fatal error logging
../drivers/scsi/pm8001/pm8001_ctl.c:622: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
** pm8001_ctl_gsm_log_show - gsm dump collection
Link: https://lore.kernel.org/r/20210708165723.8594-1-rdunlap@infradead.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Cc: linux-scsi@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
diff --git a/drivers/scsi/pm8001/pm8001_ctl.c b/drivers/scsi/pm8001/pm8001_ctl.c
index 0b8802b..ec05c42 100644
--- a/drivers/scsi/pm8001/pm8001_ctl.c
+++ b/drivers/scsi/pm8001/pm8001_ctl.c
@@ -77,7 +77,7 @@ DEVICE_ATTR(interface_rev, S_IRUGO, pm8001_ctl_mpi_interface_rev_show, NULL);
* @attr: device attribute (unused)
* @buf: the buffer returned
*
- * A sysfs 'read only' shost attribute.
+ * A sysfs 'read-only' shost attribute.
*/
static ssize_t controller_fatal_error_show(struct device *cdev,
struct device_attribute *attr, char *buf)
@@ -149,7 +149,7 @@ static ssize_t pm8001_ctl_ila_version_show(struct device *cdev,
static DEVICE_ATTR(ila_version, 0444, pm8001_ctl_ila_version_show, NULL);
/**
- * pm8001_ctl_inactive_fw_version_show - Inacative firmware version number
+ * pm8001_ctl_inactive_fw_version_show - Inactive firmware version number
* @cdev: pointer to embedded class device
* @attr: device attribute (unused)
* @buf: the buffer returned
@@ -396,6 +396,7 @@ static DEVICE_ATTR(aap_log, S_IRUGO, pm8001_ctl_aap_log_show, NULL);
* @cdev:pointer to embedded class device
* @attr: device attribute (unused)
* @buf: the buffer returned
+ *
* A sysfs 'read-only' shost attribute.
*/
static ssize_t pm8001_ctl_ib_queue_log_show(struct device *cdev,
@@ -430,6 +431,7 @@ static DEVICE_ATTR(ib_log, S_IRUGO, pm8001_ctl_ib_queue_log_show, NULL);
* @cdev:pointer to embedded class device
* @attr: device attribute (unused)
* @buf: the buffer returned
+ *
* A sysfs 'read-only' shost attribute.
*/
@@ -464,6 +466,7 @@ static DEVICE_ATTR(ob_log, S_IRUGO, pm8001_ctl_ob_queue_log_show, NULL);
* @cdev:pointer to embedded class device
* @attr: device attribute (unused)
* @buf:the buffer returned
+ *
* A sysfs 'read-only' shost attribute.
*/
static ssize_t pm8001_ctl_bios_version_show(struct device *cdev,
@@ -555,13 +558,13 @@ static ssize_t pm8001_ctl_iop_log_show(struct device *cdev,
static DEVICE_ATTR(iop_log, S_IRUGO, pm8001_ctl_iop_log_show, NULL);
/**
- ** pm8001_ctl_fatal_log_show - fatal error logging
- ** @cdev:pointer to embedded class device
- ** @attr: device attribute
- ** @buf: the buffer returned
- **
- ** A sysfs 'read-only' shost attribute.
- **/
+ * pm8001_ctl_fatal_log_show - fatal error logging
+ * @cdev:pointer to embedded class device
+ * @attr: device attribute
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
static ssize_t pm8001_ctl_fatal_log_show(struct device *cdev,
struct device_attribute *attr, char *buf)
@@ -575,13 +578,13 @@ static ssize_t pm8001_ctl_fatal_log_show(struct device *cdev,
static DEVICE_ATTR(fatal_log, S_IRUGO, pm8001_ctl_fatal_log_show, NULL);
/**
- ** non_fatal_log_show - non fatal error logging
- ** @cdev:pointer to embedded class device
- ** @attr: device attribute
- ** @buf: the buffer returned
- **
- ** A sysfs 'read-only' shost attribute.
- **/
+ * non_fatal_log_show - non fatal error logging
+ * @cdev:pointer to embedded class device
+ * @attr: device attribute
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
static ssize_t non_fatal_log_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
@@ -620,12 +623,13 @@ static ssize_t non_fatal_count_store(struct device *cdev,
static DEVICE_ATTR_RW(non_fatal_count);
/**
- ** pm8001_ctl_gsm_log_show - gsm dump collection
- ** @cdev:pointer to embedded class device
- ** @attr: device attribute (unused)
- ** @buf: the buffer returned
- ** A sysfs 'read-only' shost attribute.
- **/
+ * pm8001_ctl_gsm_log_show - gsm dump collection
+ * @cdev:pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
static ssize_t pm8001_ctl_gsm_log_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 33f8217..17c0f26 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -384,7 +384,7 @@ static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
/**
* pm8001_bar4_shift - function is called to shift BAR base address
- * @pm8001_ha : our hba card infomation
+ * @pm8001_ha : our hba card information
* @shiftValue : shifting value in memory bar.
*/
int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue)
@@ -1151,7 +1151,7 @@ static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
}
/**
- * pm8001_chip_iounmap - which maped when initialized.
+ * pm8001_chip_iounmap - which mapped when initialized.
* @pm8001_ha: our hba card information
*/
void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
@@ -1187,10 +1187,10 @@ pm8001_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha)
pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
}
- /**
- * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt
- * @pm8001_ha: our hba card information
- */
+/**
+ * pm8001_chip_intx_interrupt_disable - disable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
static void
pm8001_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
{
@@ -1876,8 +1876,8 @@ static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha,
* @piomb: the message contents of this outbound message.
*
* When FW has completed a ssp request for example a IO request, after it has
- * filled the SG data with the data, it will trigger this event represent
- * that he has finished the job,please check the coresponding buffer.
+ * filled the SG data with the data, it will trigger this event representing
+ * that he has finished the job; please check the corresponding buffer.
* So we will tell the caller who maybe waiting the result to tell upper layer
* that the task has been finished.
*/
@@ -3522,7 +3522,7 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
*
* when sas layer find a device it will notify LLDD, then the driver register
* the domain device to FW, this event is the return device ID which the FW
- * has assigned, from now,inter-communication with FW is no longer using the
+ * has assigned, from now, inter-communication with FW is no longer using the
* SAS address, use device ID which FW assigned.
*/
int pm8001_mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 313248c..47db7e0 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -233,7 +233,7 @@ static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque)
/**
* pm8001_interrupt_handler_intx - main INTx interrupt handler.
* @irq: interrupt number
- * @dev_id: sas_ha structure. The HBA is retrieved from sas_has structure.
+ * @dev_id: sas_ha structure. The HBA is retrieved from sas_ha structure.
*/
static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id)
@@ -439,9 +439,9 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
}
/**
- * pm8001_ioremap - remap the pci high physical address to kernal virtual
+ * pm8001_ioremap - remap the pci high physical address to kernel virtual
* address so that we can access them.
- * @pm8001_ha:our hba structure.
+ * @pm8001_ha: our hba structure.
*/
static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
{
@@ -652,7 +652,7 @@ static void pm8001_post_sas_ha_init(struct Scsi_Host *shost,
* pm8001_init_sas_add - initialize sas address
* @pm8001_ha: our ha struct.
*
- * Currently we just set the fixed SAS address to our HBA,for manufacture,
+ * Currently we just set the fixed SAS address to our HBA, for manufacture,
* it should read from the EEPROM
*/
static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
@@ -790,7 +790,7 @@ struct pm8001_mpi3_phy_pg_trx_config {
};
/**
- * pm8001_get_internal_phy_settings : Retrieves the internal PHY settings
+ * pm8001_get_internal_phy_settings - Retrieves the internal PHY settings
* @pm8001_ha : our adapter
* @phycfg : PHY config page to populate
*/
@@ -810,7 +810,7 @@ void pm8001_get_internal_phy_settings(struct pm8001_hba_info *pm8001_ha,
}
/**
- * pm8001_get_external_phy_settings : Retrieves the external PHY settings
+ * pm8001_get_external_phy_settings - Retrieves the external PHY settings
* @pm8001_ha : our adapter
* @phycfg : PHY config page to populate
*/
@@ -830,7 +830,7 @@ void pm8001_get_external_phy_settings(struct pm8001_hba_info *pm8001_ha,
}
/**
- * pm8001_get_phy_mask : Retrieves the mask that denotes if a PHY is int/ext
+ * pm8001_get_phy_mask - Retrieves the mask that denotes if a PHY is int/ext
* @pm8001_ha : our adapter
* @phymask : The PHY mask
*/
@@ -868,7 +868,7 @@ void pm8001_get_phy_mask(struct pm8001_hba_info *pm8001_ha, int *phymask)
}
/**
- * pm8001_set_phy_settings_ven_117c_12G() : Configure ATTO 12Gb PHY settings
+ * pm8001_set_phy_settings_ven_117c_12G() - Configure ATTO 12Gb PHY settings
* @pm8001_ha : our adapter
*/
static
@@ -903,7 +903,7 @@ int pm8001_set_phy_settings_ven_117c_12G(struct pm8001_hba_info *pm8001_ha)
}
/**
- * pm8001_configure_phy_settings : Configures PHY settings based on vendor ID.
+ * pm8001_configure_phy_settings - Configures PHY settings based on vendor ID.
* @pm8001_ha : our hba.
*/
static int pm8001_configure_phy_settings(struct pm8001_hba_info *pm8001_ha)
@@ -1053,8 +1053,8 @@ static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
* @ent: pci device id
*
* This function is the main initialization function, when register a new
- * pci driver it is invoked, all struct an hardware initilization should be done
- * here, also, register interrupt
+ * pci driver it is invoked, all struct and hardware initialization should be
+ * done here, also, register interrupt.
*/
static int pm8001_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
@@ -1172,10 +1172,11 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
return rc;
}
-/*
+/**
* pm8001_init_ccb_tag - allocate memory to CCB and tag.
* @pm8001_ha: our hba card information.
* @shost: scsi host which has been allocated outside.
+ * @pdev: pci device.
*/
static int
pm8001_init_ccb_tag(struct pm8001_hba_info *pm8001_ha, struct Scsi_Host *shost,
@@ -1270,7 +1271,7 @@ static void pm8001_pci_remove(struct pci_dev *pdev)
* pm8001_pci_suspend - power management suspend main entry point
* @dev: Device struct
*
- * Returns 0 success, anything else error.
+ * Return: 0 on success, anything else on error.
*/
static int __maybe_unused pm8001_pci_suspend(struct device *dev)
{
@@ -1315,7 +1316,7 @@ static int __maybe_unused pm8001_pci_suspend(struct device *dev)
* pm8001_pci_resume - power management resume main entry point
* @dev: Device struct
*
- * Returns 0 success, anything else error.
+ * Return: 0 on success, anything else on error.
*/
static int __maybe_unused pm8001_pci_resume(struct device *dev)
{
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 6f33d82..48548a9 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -98,14 +98,16 @@ void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha)
pm8001_tag_free(pm8001_ha, i);
}
- /**
- * pm8001_mem_alloc - allocate memory for pm8001.
- * @pdev: pci device.
- * @virt_addr: the allocated virtual address
- * @pphys_addr_hi: the physical address high byte address.
- * @pphys_addr_lo: the physical address low byte address.
- * @mem_size: memory size.
- */
+/**
+ * pm8001_mem_alloc - allocate memory for pm8001.
+ * @pdev: pci device.
+ * @virt_addr: the allocated virtual address
+ * @pphys_addr: DMA address for this device
+ * @pphys_addr_hi: the physical address high byte address.
+ * @pphys_addr_lo: the physical address low byte address.
+ * @mem_size: memory size.
+ * @align: requested byte alignment
+ */
int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
dma_addr_t *pphys_addr, u32 *pphys_addr_hi,
u32 *pphys_addr_lo, u32 mem_size, u32 align)
@@ -339,7 +341,7 @@ static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha,
}
/**
- * pm8001_task_prep_ssp - the dispatcher function,prepare ssp data for ssp task
+ * pm8001_task_prep_ssp - the dispatcher function, prepare ssp data for ssp task
* @pm8001_ha: our hba card information
* @ccb: the ccb which attached to ssp task
*/
@@ -554,10 +556,10 @@ void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
pm8001_tag_free(pm8001_ha, ccb_idx);
}
- /**
- * pm8001_alloc_dev - find a empty pm8001_device
- * @pm8001_ha: our hba card information
- */
+/**
+ * pm8001_alloc_dev - find a empty pm8001_device
+ * @pm8001_ha: our hba card information
+ */
static struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
{
u32 dev;
@@ -705,7 +707,7 @@ static void pm8001_tmf_timedout(struct timer_list *t)
* @parameter: ssp task parameter.
*
* when errors or exception happened, we may want to do something, for example
- * abort the issued task which result in this execption, it is done by calling
+ * abort the issued task which result in this exception, it is done by calling
* this function, note it is also with the task execute interface.
*/
static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
@@ -984,11 +986,12 @@ void pm8001_open_reject_retry(
}
/**
- * pm8001_I_T_nexus_reset()
- * Standard mandates link reset for ATA (type 0) and hard reset for
- * SSP (type 1) , only for RECOVERY
- * @dev: the device structure for the device to reset.
- */
+ * pm8001_I_T_nexus_reset() - reset the initiator/target connection
+ * @dev: the device structure for the device to reset.
+ *
+ * Standard mandates link reset for ATA (type 0) and hard reset for
+ * SSP (type 1), only for RECOVERY
+ */
int pm8001_I_T_nexus_reset(struct domain_device *dev)
{
int rc = TMF_RESP_FUNC_FAILED;
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 45ecd96..6ffe17b 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -140,7 +140,7 @@ ssize_t pm80xx_get_fatal_dump(struct device *cdev,
pm8001_ha->fatal_bar_loc = 0;
}
- /* Read until accum_len is retrived */
+ /* Read until accum_len is retrieved */
accum_len = pm8001_mr32(fatal_table_address,
MPI_FATAL_EDUMP_TABLE_ACCUM_LEN);
/* Determine length of data between previously stored transfer length
@@ -1011,7 +1011,7 @@ static int mpi_init_check(struct pm8001_hba_info *pm8001_ha)
value);
return -EBUSY;
}
- /* check the MPI-State for initialization upto 100ms*/
+ /* check the MPI-State for initialization up to 100ms*/
max_wait_count = 5;/* 100 msec */
do {
msleep(FW_READY_INTERVAL);
@@ -1093,7 +1093,7 @@ static int init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0);
- /**
+ /*
* lower 26 bits of SCRATCHPAD0 register describes offset within the
* PCIe BAR where the MPI configuration table is present
*/
@@ -1101,7 +1101,7 @@ static int init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
pm8001_dbg(pm8001_ha, DEV, "Scratchpad 0 Offset: 0x%x value 0x%x\n",
offset, value);
- /**
+ /*
* Upper 6 bits describe the offset within PCI config space where BAR
* is located.
*/
@@ -1109,7 +1109,7 @@ static int init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
pcibar = get_pci_bar_index(pcilogic);
pm8001_dbg(pm8001_ha, INIT, "Scratchpad 0 PCI BAR: %d\n", pcibar);
- /**
+ /*
* Make sure the offset falls inside the ioremapped PCI BAR
*/
if (offset > pm8001_ha->io_mem[pcibar].memsize) {
@@ -1121,7 +1121,7 @@ static int init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
pm8001_ha->main_cfg_tbl_addr = base_addr =
pm8001_ha->io_mem[pcibar].memvirtaddr + offset;
- /**
+ /*
* Validate main configuration table address: first DWord should read
* "PMCS"
*/
@@ -1385,7 +1385,7 @@ pm80xx_get_encrypt_info(struct pm8001_hba_info *pm8001_ha)
}
/**
- * pm80xx_encrypt_update - update flash with encryption informtion
+ * pm80xx_encrypt_update - update flash with encryption information
* @pm8001_ha: our hba card information.
*/
static int pm80xx_encrypt_update(struct pm8001_hba_info *pm8001_ha)
@@ -1422,7 +1422,7 @@ static int pm80xx_encrypt_update(struct pm8001_hba_info *pm8001_ha)
}
/**
- * pm80xx_chip_init - the main init function that initialize whole PM8001 chip.
+ * pm80xx_chip_init - the main init function that initializes whole PM8001 chip.
* @pm8001_ha: our hba card information
*/
static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha)
@@ -1541,7 +1541,7 @@ static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha)
}
/**
- * pm80xx_fatal_errors - returns non zero *ONLY* when fatal errors
+ * pm80xx_fatal_errors - returns non-zero *ONLY* when fatal errors
* @pm8001_ha: our hba card information
*
* Fatal errors are recoverable only after a host reboot.
@@ -1576,8 +1576,8 @@ pm80xx_fatal_errors(struct pm8001_hba_info *pm8001_ha)
}
/**
- * pm80xx_chip_soft_rst - soft reset the PM8001 chip, so that the clear all
- * the FW register status to the originated status.
+ * pm80xx_chip_soft_rst - soft reset the PM8001 chip, so that all
+ * FW register status are reset to the originated status.
* @pm8001_ha: our hba card information
*/
@@ -1895,13 +1895,13 @@ static void pm80xx_send_read_log(struct pm8001_hba_info *pm8001_ha,
}
/**
- * mpi_ssp_completion- process the event that FW response to the SSP request.
+ * mpi_ssp_completion - process the event that FW response to the SSP request.
* @pm8001_ha: our hba card information
* @piomb: the message contents of this outbound message.
*
* When FW has completed a ssp request for example a IO request, after it has
- * filled the SG data with the data, it will trigger this event represent
- * that he has finished the job,please check the coresponding buffer.
+ * filled the SG data with the data, it will trigger this event representing
+ * that he has finished the job; please check the corresponding buffer.
* So we will tell the caller who maybe waiting the result to tell upper layer
* that the task has been finished.
*/
@@ -3217,7 +3217,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
}
/**
- * pm80xx_hw_event_ack_req- For PM8001,some events need to acknowage to FW.
+ * pm80xx_hw_event_ack_req- For PM8001, some events need to acknowledge to FW.
* @pm8001_ha: our hba card information
* @Qnum: the outbound queue message number.
* @SEA: source of event to ack
@@ -3275,7 +3275,7 @@ static void hw_event_port_recover(struct pm8001_hba_info *pm8001_ha,
}
/**
- * hw_event_sas_phy_up -FW tells me a SAS phy up event.
+ * hw_event_sas_phy_up - FW tells me a SAS phy up event.
* @pm8001_ha: our hba card information
* @piomb: IO message buffer
*/
@@ -3353,7 +3353,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
}
/**
- * hw_event_sata_phy_up -FW tells me a SATA phy up event.
+ * hw_event_sata_phy_up - FW tells me a SATA phy up event.
* @pm8001_ha: our hba card information
* @piomb: IO message buffer
*/
@@ -3400,7 +3400,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
}
/**
- * hw_event_phy_down -we should notify the libsas the phy is down.
+ * hw_event_phy_down - we should notify the libsas the phy is down.
* @pm8001_ha: our hba card information
* @piomb: IO message buffer
*/
@@ -3500,7 +3500,7 @@ static int mpi_phy_start_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
}
/**
- * mpi_thermal_hw_event -The hw event has come.
+ * mpi_thermal_hw_event - a thermal hw event has come.
* @pm8001_ha: our hba card information
* @piomb: IO message buffer
*/
@@ -3530,7 +3530,7 @@ static int mpi_thermal_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
}
/**
- * mpi_hw_event -The hw event has come.
+ * mpi_hw_event - The hw event has come.
* @pm8001_ha: our hba card information
* @piomb: IO message buffer
*/
@@ -4025,7 +4025,7 @@ static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
case OPC_OUB_SET_DEV_INFO:
pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_DEV_INFO\n");
break;
- /* spcv specifc commands */
+ /* spcv specific commands */
case OPC_OUB_PHY_START_RESP:
pm8001_dbg(pm8001_ha, MSG,
"OPC_OUB_PHY_START_RESP opcode:%x\n", opc);
@@ -4186,7 +4186,7 @@ static void build_smp_cmd(u32 deviceID, __le32 hTag,
}
/**
- * pm80xx_chip_smp_req - send a SMP task to FW
+ * pm80xx_chip_smp_req - send an SMP task to FW
* @pm8001_ha: our hba card information.
* @ccb: the ccb information this request used.
*/
@@ -4346,7 +4346,7 @@ static int check_enc_sat_cmd(struct sas_task *task)
}
/**
- * pm80xx_chip_ssp_io_req - send a SSP task to FW
+ * pm80xx_chip_ssp_io_req - send an SSP task to FW
* @pm8001_ha: our hba card information.
* @ccb: the ccb information this request used.
*/
@@ -4750,13 +4750,13 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
LINKMODE_AUTO | pm8001_ha->link_rate | phy_id);
/* SSC Disable and SAS Analog ST configuration */
- /**
+ /*
payload.ase_sh_lm_slr_phyid =
cpu_to_le32(SSC_DISABLE_30 | SAS_ASE | SPINHOLD_DISABLE |
LINKMODE_AUTO | LINKRATE_15 | LINKRATE_30 | LINKRATE_60 |
phy_id);
Have to add "SAS PHY Analog Setup SPASTI 1 Byte" Based on need
- **/
+ */
payload.sas_identify.dev_type = SAS_END_DEVICE;
payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL;