Merge master.kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes
* master.kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
[GFS2] Fix Kconfig
[DLM] fix compile warning
diff --git a/Documentation/DocBook/genericirq.tmpl b/Documentation/DocBook/genericirq.tmpl
index 0f4a4b6..4215f69 100644
--- a/Documentation/DocBook/genericirq.tmpl
+++ b/Documentation/DocBook/genericirq.tmpl
@@ -303,10 +303,10 @@
do {
if (desc->status & masked)
desc->chip->enable();
- desc-status &= ~pending;
+ desc->status &= ~pending;
handle_IRQ_event(desc->action);
} while (status & pending);
-desc-status &= ~running;
+desc->status &= ~running;
desc->chip->end();
</programlisting>
</para>
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index c6c9a9c..3adaace 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -946,6 +946,13 @@
scheduler for example, to reposition the request
if its sorting order has changed.
+elevator_allow_merge_fn called whenever the block layer determines
+ that a bio can be merged into an existing
+ request safely. The io scheduler may still
+ want to stop a merge at this point if it
+ results in some sort of conflict internally,
+ this hook allows it to do that.
+
elevator_dispatch_fn fills the dispatch queue with ready requests.
I/O schedulers are free to postpone requests by
not filling the dispatch queue unless @force
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index ef69c75..25d2985 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1714,6 +1714,14 @@
uart6850= [HW,OSS]
Format: <io>,<irq>
+ uhci-hcd.ignore_oc=
+ [USB] Ignore overcurrent events (default N).
+ Some badly-designed motherboards generate lots of
+ bogus events, for ports that aren't wired to
+ anything. Set this parameter to avoid log spamming.
+ Note that genuine overcurrent events won't be
+ reported either.
+
usbhid.mousepoll=
[USBHID] The interval which mice are to be polled at.
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index b3bd366..3399427 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1703,29 +1703,32 @@
Required properties:
- device_type : has to be "rom"
- - compatible : Should specify what this ROM device is compatible with
- (i.e. "onenand"). Currently, this is most likely to be "direct-mapped"
- (which corresponds to the MTD physmap mapping driver).
- - regs : Offset and length of the register set (or memory mapping) for
+ - compatible : Should specify what this flash device is compatible with.
+ Currently, this is most likely to be "direct-mapped" (which
+ corresponds to the MTD physmap mapping driver).
+ - reg : Offset and length of the register set (or memory mapping) for
the device.
+ - bank-width : Width of the flash data bus in bytes. Required
+ for the NOR flashes (compatible == "direct-mapped" and others) ONLY.
Recommended properties :
- - bank-width : Width of the flash data bus in bytes. Required
- for the NOR flashes (compatible == "direct-mapped" and others) ONLY.
- partitions : Several pairs of 32-bit values where the first value is
partition's offset from the start of the device and the second one is
partition size in bytes with LSB used to signify a read only
- partititon (so, the parition size should always be an even number).
+ partition (so, the parition size should always be an even number).
- partition-names : The list of concatenated zero terminated strings
representing the partition names.
+ - probe-type : The type of probe which should be done for the chip
+ (JEDEC vs CFI actually). Valid ONLY for NOR flashes.
Example:
flash@ff000000 {
device_type = "rom";
compatible = "direct-mapped";
- regs = <ff000000 01000000>;
+ probe-type = "CFI";
+ reg = <ff000000 01000000>;
bank-width = <4>;
partitions = <00000000 00f80000
00f80000 00080001>;
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index 077fbe2..ccd0a95 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -927,7 +927,7 @@
<informalexample>
<programlisting>
<![CDATA[
- struct mychip *chip = (struct mychip *)card->private_data;
+ struct mychip *chip = card->private_data;
]]>
</programlisting>
</informalexample>
@@ -1095,7 +1095,7 @@
/* release the irq */
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, chip);
/* release the i/o ports & memory */
pci_release_regions(chip->pci);
/* disable the PCI entry */
@@ -1148,7 +1148,7 @@
}
chip->port = pci_resource_start(pci, 0);
if (request_irq(pci->irq, snd_mychip_interrupt,
- IRQF_DISABLED|IRQF_SHARED, "My Chip", chip)) {
+ IRQF_SHARED, "My Chip", chip)) {
printk(KERN_ERR "cannot grab irq %d\n", pci->irq);
snd_mychip_free(chip);
return -EBUSY;
@@ -1387,7 +1387,7 @@
<programlisting>
<![CDATA[
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, chip);
]]>
</programlisting>
</informalexample>
diff --git a/MAINTAINERS b/MAINTAINERS
index dea5b2a..13902cb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1277,6 +1277,12 @@
W: http://drama.obuda.kando.hu/~fero/cgi-bin/hgafb.shtml
S: Maintained
+HID CORE LAYER
+P: Jiri Kosina
+M: jkosina@suse.cz
+L: linux-input@atrey.karlin.mff.cuni.cz
+S: Maintained
+
HIGH-SPEED SCC DRIVER FOR AX.25
P: Klaus Kudielka
M: klaus.kudielka@ieee.org
@@ -3124,7 +3130,7 @@
P: David Brownell
M: dbrownell@users.sourceforge.net
L: linux-usb-devel@lists.sourceforge.net
-S: Maintained
+S: Odd Fixes
USB ET61X[12]51 DRIVER
P: Luca Risolia
@@ -3177,11 +3183,11 @@
W: http://www.one-eyed-alien.net/~mdharm/linux-usb/
USB OHCI DRIVER
-P: Roman Weissgaerber
-M: weissg@vienna.at
+P: David Brownell
+M: dbrownell@users.sourceforge.net
L: linux-usb-users@lists.sourceforge.net
L: linux-usb-devel@lists.sourceforge.net
-S: Maintained
+S: Odd Fixes
USB OPTION-CARD DRIVER
P: Matthias Urlichs
diff --git a/Makefile b/Makefile
index dc82462..4a47203 100644
--- a/Makefile
+++ b/Makefile
@@ -496,11 +496,6 @@
CFLAGS += -fomit-frame-pointer
endif
-ifdef CONFIG_UNWIND_INFO
-CFLAGS += -fasynchronous-unwind-tables
-LDFLAGS_vmlinux += --eh-frame-hdr
-endif
-
ifdef CONFIG_DEBUG_INFO
CFLAGS += -g
endif
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index f8a66b7..24a701a 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -1,14 +1,18 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1-git9
-# Sat Jul 15 15:08:10 2006
+# Linux kernel version: 2.6.20-rc1
+# Sat Dec 16 06:05:24 2006
#
CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
@@ -28,18 +32,22 @@
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -48,12 +56,12 @@
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
@@ -71,7 +79,10 @@
#
# Block layer
#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
@@ -103,7 +114,9 @@
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
@@ -127,6 +140,7 @@
#
CONFIG_MACH_ADSSPHERE=y
CONFIG_MACH_EDB9302=y
+CONFIG_MACH_EDB9302A=y
CONFIG_MACH_EDB9312=y
CONFIG_MACH_EDB9315=y
CONFIG_MACH_EDB9315A=y
@@ -138,12 +152,14 @@
#
CONFIG_CPU_32=y
CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
+CONFIG_CPU_32v4T=y
CONFIG_CPU_ABRT_EV4T=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
@@ -230,6 +246,7 @@
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -250,13 +267,29 @@
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
@@ -283,7 +316,6 @@
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -330,7 +362,7 @@
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
#
@@ -342,6 +374,7 @@
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
@@ -430,7 +463,7 @@
#
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
@@ -442,6 +475,8 @@
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
@@ -460,23 +495,29 @@
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DEBUG is not set
#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
@@ -513,6 +554,7 @@
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+CONFIG_EP93XX_ETH=y
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
@@ -607,17 +649,12 @@
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -645,7 +682,7 @@
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
@@ -664,6 +701,7 @@
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
@@ -697,12 +735,15 @@
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
@@ -711,6 +752,7 @@
#
# Misc devices
#
+# CONFIG_TIFM_CORE is not set
#
# LED devices
@@ -729,7 +771,6 @@
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
@@ -742,6 +783,7 @@
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -763,6 +805,7 @@
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
@@ -797,12 +840,12 @@
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
-# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
@@ -821,6 +864,7 @@
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
@@ -834,8 +878,8 @@
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
@@ -857,6 +901,8 @@
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_HP4X is not set
@@ -867,12 +913,14 @@
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
@@ -880,11 +928,12 @@
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
@@ -908,6 +957,7 @@
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
@@ -921,7 +971,7 @@
# RTC drivers
#
# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
+CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
@@ -943,12 +993,14 @@
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -980,8 +1032,10 @@
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
@@ -1102,6 +1156,11 @@
# CONFIG_NLS_UTF8 is not set
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Profiling support
#
# CONFIG_PROFILING is not set
@@ -1110,8 +1169,11 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
@@ -1128,10 +1190,9 @@
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
@@ -1151,12 +1212,9 @@
# CONFIG_CRYPTO is not set
#
-# Hardware crypto devices
-#
-
-#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
@@ -1164,3 +1222,4 @@
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig
index f6e4619..43c4a37 100644
--- a/arch/arm/configs/iop13xx_defconfig
+++ b/arch/arm/configs/iop13xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19
-# Fri Dec 1 10:51:01 2006
+# Linux kernel version: 2.6.20-rc1-git5
+# Tue Dec 19 21:38:01 2006
#
CONFIG_ARM=y
# CONFIG_GENERIC_TIME is not set
@@ -11,6 +11,8 @@
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
@@ -39,6 +41,7 @@
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -77,7 +80,9 @@
# Block layer
#
CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
@@ -154,11 +159,13 @@
CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_IWMMXT is not set
#
# Bus support
#
CONFIG_PCI=y
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -259,9 +266,23 @@
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_IPV6 is not set
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
@@ -433,7 +454,7 @@
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
@@ -448,6 +469,7 @@
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
@@ -467,6 +489,7 @@
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
@@ -510,6 +533,7 @@
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
@@ -605,6 +629,7 @@
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
@@ -711,10 +736,6 @@
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
@@ -820,6 +841,7 @@
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
@@ -830,6 +852,7 @@
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
@@ -883,6 +906,11 @@
# CONFIG_SOUND is not set
#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
@@ -970,6 +998,7 @@
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
+CONFIG_ECRYPT_FS=y
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
@@ -1092,6 +1121,11 @@
# CONFIG_NLS_UTF8 is not set
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Profiling support
#
# CONFIG_PROFILING is not set
@@ -1103,28 +1137,68 @@
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_USER=y
#
# Security options
#
-# CONFIG_KEYS is not set
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
@@ -1132,3 +1206,4 @@
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index b275c53..7909a55 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -1,15 +1,18 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc7
-# Tue Sep 19 00:30:18 2006
+# Linux kernel version: 2.6.20-rc1-git5
+# Tue Dec 19 21:37:52 2006
#
CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
@@ -29,18 +32,22 @@
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -49,12 +56,12 @@
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
@@ -72,7 +79,10 @@
#
# Block layer
#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
@@ -106,6 +116,7 @@
# CONFIG_ARCH_IMX is not set
CONFIG_ARCH_IOP32X=y
# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
@@ -141,17 +152,22 @@
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_IWMMXT is not set
CONFIG_XSCALE_PMU=y
#
# Bus support
#
CONFIG_PCI=y
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
#
@@ -225,6 +241,7 @@
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -246,13 +263,29 @@
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
@@ -279,7 +312,6 @@
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -338,6 +370,7 @@
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
@@ -419,9 +452,11 @@
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
@@ -440,6 +475,8 @@
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
@@ -458,14 +495,16 @@
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
@@ -478,26 +517,84 @@
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
#
# Multi-device support (RAID and LVM)
@@ -512,6 +609,7 @@
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
@@ -612,6 +710,7 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
@@ -620,6 +719,7 @@
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
@@ -654,6 +754,7 @@
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
@@ -725,10 +826,6 @@
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
@@ -736,7 +833,6 @@
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -801,6 +897,7 @@
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
@@ -834,15 +931,18 @@
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
@@ -851,6 +951,8 @@
#
# Misc devices
#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
#
# LED devices
@@ -869,12 +971,12 @@
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
@@ -895,6 +997,11 @@
# CONFIG_SOUND is not set
#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
@@ -909,6 +1016,7 @@
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
@@ -946,6 +1054,7 @@
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -984,6 +1093,7 @@
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
@@ -1001,6 +1111,7 @@
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
@@ -1008,12 +1119,13 @@
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
#
# USB DSL modem support
@@ -1045,6 +1157,7 @@
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
@@ -1056,6 +1169,7 @@
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -1084,8 +1198,10 @@
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
@@ -1095,6 +1211,7 @@
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
+CONFIG_ECRYPT_FS=y
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
@@ -1129,7 +1246,7 @@
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
+CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1172,6 +1289,11 @@
# CONFIG_NLS is not set
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Profiling support
#
# CONFIG_PROFILING is not set
@@ -1180,8 +1302,11 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
@@ -1197,10 +1322,9 @@
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
@@ -1211,13 +1335,48 @@
#
# Security options
#
-# CONFIG_KEYS is not set
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -1226,10 +1385,12 @@
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index 848e3ac..fa271bc 100644
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -1,15 +1,18 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc7
-# Tue Sep 19 00:30:42 2006
+# Linux kernel version: 2.6.20-rc1
+# Sat Dec 16 06:05:34 2006
#
CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
@@ -29,18 +32,22 @@
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -49,12 +56,12 @@
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
@@ -72,7 +79,10 @@
#
# Block layer
#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
@@ -106,6 +116,7 @@
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP32X is not set
CONFIG_ARCH_IOP33X=y
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
@@ -139,17 +150,22 @@
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_IWMMXT is not set
CONFIG_XSCALE_PMU=y
#
# Bus support
#
CONFIG_PCI=y
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
#
@@ -223,6 +239,7 @@
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -244,13 +261,29 @@
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
@@ -277,7 +310,6 @@
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -336,6 +368,7 @@
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
@@ -423,7 +456,7 @@
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
@@ -443,6 +476,8 @@
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
@@ -461,14 +496,16 @@
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
@@ -481,26 +518,34 @@
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
@@ -515,6 +560,7 @@
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
@@ -580,6 +626,7 @@
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
@@ -588,6 +635,7 @@
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
@@ -622,6 +670,7 @@
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
@@ -693,10 +742,6 @@
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
@@ -704,7 +749,6 @@
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -769,6 +813,7 @@
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
@@ -802,15 +847,18 @@
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
@@ -819,6 +867,8 @@
#
# Misc devices
#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
#
# LED devices
@@ -837,7 +887,6 @@
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
@@ -863,6 +912,11 @@
# CONFIG_SOUND is not set
#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
@@ -900,6 +954,7 @@
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
@@ -911,6 +966,7 @@
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -939,8 +995,10 @@
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
@@ -1019,6 +1077,11 @@
# CONFIG_NLS is not set
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Profiling support
#
# CONFIG_PROFILING is not set
@@ -1027,8 +1090,11 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
@@ -1044,10 +1110,9 @@
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
@@ -1067,10 +1132,6 @@
# CONFIG_CRYPTO is not set
#
-# Hardware crypto devices
-#
-
-#
# Library routines
#
# CONFIG_CRC_CCITT is not set
@@ -1078,3 +1139,4 @@
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig
index bbd2dcf..f8f9793 100644
--- a/arch/arm/configs/ixp2000_defconfig
+++ b/arch/arm/configs/ixp2000_defconfig
@@ -1,14 +1,18 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Sun Jul 9 15:28:50 2006
+# Linux kernel version: 2.6.20-rc1
+# Sat Dec 16 06:05:39 2006
#
CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
@@ -28,17 +32,22 @@
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -47,12 +56,12 @@
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
@@ -70,7 +79,10 @@
#
# Block layer
#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
@@ -102,7 +114,9 @@
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_IXP23XX is not set
@@ -143,24 +157,28 @@
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_IWMMXT is not set
CONFIG_XSCALE_PMU=y
#
# Bus support
#
CONFIG_PCI=y
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
-# CONFIG_PCCARD is not set
#
# Kernel Features
@@ -228,6 +246,7 @@
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -248,13 +267,29 @@
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
@@ -281,7 +316,6 @@
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -308,7 +342,6 @@
#
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -340,6 +373,7 @@
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
@@ -422,11 +456,12 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -436,6 +471,12 @@
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
@@ -501,8 +542,8 @@
# CONFIG_FORCEDETH is not set
CONFIG_CS89x0=y
# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
@@ -532,6 +573,7 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
@@ -540,6 +582,7 @@
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
@@ -555,7 +598,6 @@
# Wan interfaces
#
CONFIG_WAN=y
-# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
@@ -571,6 +613,7 @@
# CONFIG_WANXL is not set
# CONFIG_PC300 is not set
# CONFIG_FARSYNC is not set
+# CONFIG_DSCC4 is not set
CONFIG_DLCI=y
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
@@ -592,6 +635,7 @@
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
@@ -673,10 +717,6 @@
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
@@ -684,7 +724,6 @@
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -749,6 +788,7 @@
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
@@ -782,15 +822,18 @@
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
@@ -799,6 +842,8 @@
#
# Misc devices
#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
#
# LED devices
@@ -817,7 +862,6 @@
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
@@ -829,6 +873,7 @@
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -836,6 +881,11 @@
# CONFIG_SOUND is not set
#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
@@ -875,6 +925,7 @@
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
@@ -882,6 +933,7 @@
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -910,8 +962,10 @@
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
@@ -961,7 +1015,6 @@
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
@@ -994,6 +1047,11 @@
# CONFIG_NLS is not set
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Profiling support
#
# CONFIG_PROFILING is not set
@@ -1002,8 +1060,11 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
@@ -1019,10 +1080,9 @@
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
@@ -1042,12 +1102,9 @@
# CONFIG_CRYPTO is not set
#
-# Hardware crypto devices
-#
-
-#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
@@ -1055,3 +1112,4 @@
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig
index 06deefa..27cf022 100644
--- a/arch/arm/configs/ixp23xx_defconfig
+++ b/arch/arm/configs/ixp23xx_defconfig
@@ -1,14 +1,18 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Sun Jul 9 14:13:35 2006
+# Linux kernel version: 2.6.20-rc1
+# Sat Dec 16 06:05:45 2006
#
CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
@@ -28,17 +32,22 @@
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -47,12 +56,12 @@
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
@@ -70,7 +79,10 @@
#
# Block layer
#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
@@ -102,7 +114,9 @@
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
CONFIG_ARCH_IXP23XX=y
@@ -137,6 +151,8 @@
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
CONFIG_IO_36=y
#
@@ -144,11 +160,15 @@
#
# CONFIG_ARM_THUMB is not set
CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_IWMMXT is not set
#
# Bus support
#
CONFIG_PCI=y
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
#
@@ -222,6 +242,7 @@
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -242,13 +263,29 @@
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
@@ -275,7 +312,6 @@
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -334,6 +370,7 @@
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
@@ -418,12 +455,13 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -432,6 +470,7 @@
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
@@ -455,7 +494,6 @@
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
@@ -469,6 +507,7 @@
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
@@ -477,6 +516,7 @@
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=y
+# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
@@ -491,6 +531,8 @@
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
@@ -509,14 +551,16 @@
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
@@ -529,26 +573,34 @@
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
@@ -649,6 +701,7 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
@@ -657,6 +710,7 @@
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
@@ -672,7 +726,6 @@
# Wan interfaces
#
CONFIG_WAN=y
-# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
@@ -688,6 +741,7 @@
# CONFIG_WANXL is not set
# CONFIG_PC300 is not set
# CONFIG_FARSYNC is not set
+# CONFIG_DSCC4 is not set
CONFIG_DLCI=y
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
@@ -710,6 +764,7 @@
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
@@ -795,10 +850,6 @@
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
@@ -806,7 +857,6 @@
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -870,6 +920,7 @@
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
@@ -903,15 +954,18 @@
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
@@ -920,6 +974,8 @@
#
# Misc devices
#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
#
# LED devices
@@ -938,7 +994,6 @@
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
@@ -951,6 +1006,7 @@
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -958,6 +1014,11 @@
# CONFIG_SOUND is not set
#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
@@ -972,6 +1033,7 @@
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
@@ -1012,6 +1074,7 @@
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1050,6 +1113,7 @@
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
@@ -1067,19 +1131,21 @@
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
#
# USB DSL modem support
@@ -1113,6 +1179,7 @@
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
@@ -1120,6 +1187,7 @@
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -1150,8 +1218,10 @@
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
@@ -1201,7 +1271,6 @@
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
@@ -1273,6 +1342,11 @@
# CONFIG_NLS_UTF8 is not set
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Profiling support
#
# CONFIG_PROFILING is not set
@@ -1281,8 +1355,11 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
@@ -1298,10 +1375,9 @@
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
@@ -1321,12 +1397,9 @@
# CONFIG_CRYPTO is not set
#
-# Hardware crypto devices
-#
-
-#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
@@ -1334,3 +1407,4 @@
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig
index e146189..a3bf583 100644
--- a/arch/arm/configs/lpd270_defconfig
+++ b/arch/arm/configs/lpd270_defconfig
@@ -1,14 +1,18 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Sun Jul 9 14:15:23 2006
+# Linux kernel version: 2.6.20-rc1
+# Sat Dec 16 06:05:51 2006
#
CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MTD_XIP=y
@@ -29,16 +33,21 @@
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -47,12 +56,12 @@
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
@@ -69,7 +78,10 @@
#
# Block layer
#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
@@ -101,7 +113,9 @@
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
@@ -125,7 +139,6 @@
# CONFIG_PXA_SHARPSL is not set
# CONFIG_MACH_TRIZEPS4 is not set
CONFIG_PXA27x=y
-CONFIG_IWMMXT=y
#
# Processor Type
@@ -136,11 +149,15 @@
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
#
@@ -217,6 +234,7 @@
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -237,13 +255,29 @@
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
@@ -270,7 +304,6 @@
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -329,6 +362,7 @@
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
@@ -410,7 +444,7 @@
#
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
@@ -447,6 +481,12 @@
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
@@ -526,6 +566,7 @@
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
@@ -548,6 +589,7 @@
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
@@ -600,17 +642,12 @@
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -626,6 +663,7 @@
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
@@ -634,11 +672,14 @@
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
+# CONFIG_TIFM_CORE is not set
#
# LED devices
@@ -657,7 +698,6 @@
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
@@ -679,6 +719,7 @@
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -725,7 +766,6 @@
# Generic devices
#
CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
@@ -741,6 +781,12 @@
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+
+#
+# HID Devices
+#
+CONFIG_HID=y
#
# USB support
@@ -777,10 +823,12 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -811,6 +859,7 @@
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
@@ -860,7 +909,6 @@
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
@@ -917,6 +965,11 @@
# CONFIG_NLS_UTF8 is not set
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Profiling support
#
# CONFIG_PROFILING is not set
@@ -925,8 +978,11 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
@@ -942,10 +998,9 @@
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
@@ -965,12 +1020,9 @@
# CONFIG_CRYPTO is not set
#
-# Hardware crypto devices
-#
-
-#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
@@ -978,3 +1030,4 @@
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
index 0498ebd..650a248 100644
--- a/arch/arm/configs/onearm_defconfig
+++ b/arch/arm/configs/onearm_defconfig
@@ -1,14 +1,18 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Sun Jul 9 14:16:20 2006
+# Linux kernel version: 2.6.20-rc1
+# Sat Dec 16 06:05:18 2006
#
CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
@@ -28,16 +32,21 @@
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -46,12 +55,12 @@
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
@@ -69,7 +78,10 @@
#
# Block layer
#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
@@ -101,7 +113,9 @@
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
@@ -118,10 +132,6 @@
#
# Atmel AT91 System-on-Chip
#
-
-#
-# Atmel AT91 Processors
-#
CONFIG_ARCH_AT91RM9200=y
# CONFIG_ARCH_AT91SAM9260 is not set
# CONFIG_ARCH_AT91SAM9261 is not set
@@ -140,6 +150,10 @@
# CONFIG_MACH_KAFA is not set
#
+# AT91 Board Options
+#
+
+#
# AT91 Feature Selections
#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
@@ -149,12 +163,14 @@
#
CONFIG_CPU_32=y
CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
+CONFIG_CPU_32v4T=y
CONFIG_CPU_ABRT_EV4T=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
@@ -251,6 +267,7 @@
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -271,13 +288,29 @@
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
@@ -304,7 +337,6 @@
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -360,6 +392,7 @@
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
@@ -438,11 +471,12 @@
#
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -457,6 +491,12 @@
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
@@ -541,6 +581,7 @@
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
@@ -619,10 +660,6 @@
# CONFIG_R3964 is not set
#
-# Ftape, the floppy tape device driver
-#
-
-#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
@@ -634,7 +671,6 @@
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -652,6 +688,7 @@
#
# I2C Hardware Bus support
#
+# CONFIG_I2C_AT91 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_STUB is not set
@@ -681,6 +718,7 @@
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
@@ -714,12 +752,15 @@
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
@@ -728,6 +769,7 @@
#
# Misc devices
#
+# CONFIG_TIFM_CORE is not set
#
# LED devices
@@ -746,7 +788,6 @@
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
@@ -759,6 +800,7 @@
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -766,6 +808,11 @@
# CONFIG_SOUND is not set
#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
@@ -780,6 +827,7 @@
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
@@ -804,7 +852,6 @@
#
# may also be needed; see USB_STORAGE Help for more information
#
-# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -842,6 +889,7 @@
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
@@ -859,18 +907,20 @@
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
@@ -897,6 +947,7 @@
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
#
# MMC/SD Card support
@@ -904,7 +955,8 @@
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=y
-CONFIG_MMC_AT91RM9200=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_TIFM_SD is not set
#
# Real Time Clock
@@ -919,10 +971,12 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -951,8 +1005,10 @@
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
@@ -995,7 +1051,6 @@
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
@@ -1013,6 +1068,11 @@
# CONFIG_NLS is not set
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Profiling support
#
# CONFIG_PROFILING is not set
@@ -1021,8 +1081,11 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
@@ -1038,10 +1101,9 @@
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
@@ -1061,15 +1123,13 @@
# CONFIG_CRYPTO is not set
#
-# Hardware crypto devices
-#
-
-#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index e8f7436..f7598cb 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -110,7 +110,7 @@
CALL(sys_ni_syscall) /* was sys_profil */
CALL(sys_statfs)
/* 100 */ CALL(sys_fstatfs)
- CALL(sys_ni_syscall)
+ CALL(sys_ni_syscall) /* sys_ioperm */
CALL(OBSOLETE(ABI(sys_socketcall, sys_oabi_socketcall)))
CALL(sys_syslog)
CALL(sys_setitimer)
@@ -132,7 +132,7 @@
/* 120 */ CALL(sys_clone_wrapper)
CALL(sys_setdomainname)
CALL(sys_newuname)
- CALL(sys_ni_syscall)
+ CALL(sys_ni_syscall) /* modify_ldt */
CALL(sys_adjtimex)
/* 125 */ CALL(sys_mprotect)
CALL(sys_sigprocmask)
@@ -146,7 +146,7 @@
CALL(sys_bdflush)
/* 135 */ CALL(sys_sysfs)
CALL(sys_personality)
- CALL(sys_ni_syscall) /* CALL(_sys_afs_syscall) */
+ CALL(sys_ni_syscall) /* reserved for afs_syscall */
CALL(sys_setfsuid16)
CALL(sys_setfsgid16)
/* 140 */ CALL(sys_llseek)
@@ -175,7 +175,7 @@
CALL(sys_arm_mremap)
CALL(sys_setresuid16)
/* 165 */ CALL(sys_getresuid16)
- CALL(sys_ni_syscall)
+ CALL(sys_ni_syscall) /* vm86 */
CALL(sys_ni_syscall) /* was sys_query_module */
CALL(sys_poll)
CALL(sys_nfsservctl)
@@ -197,8 +197,8 @@
/* 185 */ CALL(sys_capset)
CALL(sys_sigaltstack_wrapper)
CALL(sys_sendfile)
- CALL(sys_ni_syscall)
- CALL(sys_ni_syscall)
+ CALL(sys_ni_syscall) /* getpmsg */
+ CALL(sys_ni_syscall) /* putpmsg */
/* 190 */ CALL(sys_vfork_wrapper)
CALL(sys_getrlimit)
CALL(sys_mmap2)
@@ -344,6 +344,18 @@
CALL(sys_readlinkat)
CALL(sys_fchmodat)
CALL(sys_faccessat)
+/* 335 */ CALL(sys_ni_syscall) /* eventually pselect6 */
+ CALL(sys_ni_syscall) /* eventually ppoll */
+ CALL(sys_unshare)
+ CALL(sys_set_robust_list)
+ CALL(sys_get_robust_list)
+/* 340 */ CALL(sys_splice)
+ CALL(sys_arm_sync_file_range)
+ CALL(sys_tee)
+ CALL(sys_vmsplice)
+ CALL(sys_move_pages)
+/* 345 */ CALL(sys_getcpu)
+ CALL(sys_ni_syscall) /* eventually epoll_pwait */
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index cf2bd42..bbab134 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -855,6 +855,7 @@
"edsp",
"java",
"iwmmxt",
+ "crunch",
NULL
};
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index 00c18d3..3d4fcbc 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -328,3 +328,16 @@
{
return sys_fadvise64_64(fd, offset, len, advice);
}
+
+/*
+ * Yet more syscall fsckage - we can't fit sys_sync_file_range's
+ * arguments into the available registers with EABI. So, let's
+ * create an ARM specific syscall for this which has _sane_
+ * arguments. (This incidentally also has an ABI-independent
+ * argument layout.)
+ */
+asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags,
+ loff_t offset, loff_t nbytes)
+{
+ return sys_sync_file_range(fd, offset, nbytes, flags);
+}
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index d649b39..6b26346 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -477,4 +477,8 @@
platform_device_register(&ep93xx_rtc_device);
platform_device_register(&ep93xx_ohci_device);
+
+#ifdef CONFIG_CRUNCH
+ elf_hwcap |= HWCAP_CRUNCH;
+#endif
}
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index ee59578..2a1bbfe 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -88,11 +88,11 @@
MACHINE_START(IQ81340MC, "Intel IQ81340MC")
/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
- .phys_io = PHYS_IO,
- .io_pg_offst = IO_PG_OFFSET,
+ .phys_io = IOP13XX_PMMR_PHYS_MEM_BASE,
+ .io_pg_offst = (IOP13XX_PMMR_VIRT_MEM_BASE >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
.map_io = iop13xx_map_io,
.init_irq = iop13xx_init_irq,
.timer = &iq81340mc_timer,
- .boot_params = BOOT_PARAM_OFFSET,
.init_machine = iq81340mc_init,
MACHINE_END
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index 6677e14..5ad2b62 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -90,11 +90,11 @@
MACHINE_START(IQ81340SC, "Intel IQ81340SC")
/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
- .phys_io = PHYS_IO,
- .io_pg_offst = IO_PG_OFFSET,
+ .phys_io = IOP13XX_PMMR_PHYS_MEM_BASE,
+ .io_pg_offst = (IOP13XX_PMMR_VIRT_MEM_BASE >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
.map_io = iop13xx_map_io,
.init_irq = iop13xx_init_irq,
.timer = &iq81340sc_timer,
- .boot_params = BOOT_PARAM_OFFSET,
.init_machine = iq81340sc_init,
MACHINE_END
diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c
index c4d9c8c..dbbc07c 100644
--- a/arch/arm/mach-iop13xx/irq.c
+++ b/arch/arm/mach-iop13xx/irq.c
@@ -222,25 +222,29 @@
iop13xx_cp6_restore(cp_flags);
}
-static struct irqchip iop13xx_irqchip0 = {
+static struct irq_chip iop13xx_irqchip1 = {
+ .name = "IOP13xx-1",
.ack = iop13xx_irq_mask0,
.mask = iop13xx_irq_mask0,
.unmask = iop13xx_irq_unmask0,
};
-static struct irqchip iop13xx_irqchip1 = {
+static struct irq_chip iop13xx_irqchip2 = {
+ .name = "IOP13xx-2",
.ack = iop13xx_irq_mask1,
.mask = iop13xx_irq_mask1,
.unmask = iop13xx_irq_unmask1,
};
-static struct irqchip iop13xx_irqchip2 = {
+static struct irq_chip iop13xx_irqchip3 = {
+ .name = "IOP13xx-3",
.ack = iop13xx_irq_mask2,
.mask = iop13xx_irq_mask2,
.unmask = iop13xx_irq_unmask2,
};
-static struct irqchip iop13xx_irqchip3 = {
+static struct irq_chip iop13xx_irqchip4 = {
+ .name = "IOP13xx-4",
.ack = iop13xx_irq_mask3,
.mask = iop13xx_irq_mask3,
.unmask = iop13xx_irq_unmask3,
@@ -270,15 +274,15 @@
for(i = 0; i < NR_IOP13XX_IRQS; i++) {
if (i < 32)
- set_irq_chip(i, &iop13xx_irqchip0);
- else if (i < 64)
set_irq_chip(i, &iop13xx_irqchip1);
- else if (i < 96)
+ else if (i < 64)
set_irq_chip(i, &iop13xx_irqchip2);
- else
+ else if (i < 96)
set_irq_chip(i, &iop13xx_irqchip3);
+ else
+ set_irq_chip(i, &iop13xx_irqchip4);
- set_irq_handler(i, do_level_IRQ);
+ set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index 3756d2c..5fbeb28 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -337,7 +337,7 @@
#ifdef CONFIG_MTD_PHYSMAP
iq8134x_flash_resource.end = iq8134x_flash_resource.start +
- iq8134x_probe_flash_size();
+ iq8134x_probe_flash_size() - 1;
if (iq8134x_flash_resource.end > iq8134x_flash_resource.start)
iop13xx_devices[plat_idx++] = &iq8134x_flash;
else
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 9f46bf3..eb4ec41 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -5,6 +5,7 @@
config MACH_AML_M5900
bool "AML M5900 Series"
select CPU_S3C2410
+ select PM_SIMTEC if PM
help
Say Y here if you are using the American Microsystems M5900 Series
<http://www.amltd.com>
@@ -12,6 +13,7 @@
config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
select CPU_S3C2440
+ select PM_SIMTEC if PM
help
Say Y here if you are using the Simtec Electronics ANUBIS
development system
@@ -19,6 +21,7 @@
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
select CPU_S3C2440
+ select PM_SIMTEC if PM
help
Say Y here if you are using the Simtec IM2440D20 module, also
known as the Osiris.
@@ -26,6 +29,7 @@
config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select CPU_S3C2410
+ select PM_SIMTEC if PM
select ISA
help
Say Y here if you are using the Simtec Electronics EB2410ITX
@@ -43,14 +47,13 @@
config PM_H1940
bool
- depends on PM
help
Internal node for H1940 and related PM
config ARCH_H1940
bool "IPAQ H1940"
select CPU_S3C2410
- select PM_H1940
+ select PM_H1940 if PM
help
Say Y here if you are using the HP IPAQ H1940
@@ -112,6 +115,7 @@
config MACH_VR1000
bool "Thorcom VR1000"
+ select PM_SIMTEC if PM
select CPU_S3C2410
help
Say Y here if you are using the Thorcom VR1000 board.
@@ -122,7 +126,7 @@
config MACH_RX3715
bool "HP iPAQ rx3715"
select CPU_S3C2440
- select PM_H1940
+ select PM_H1940 if PM
help
Say Y here if you are using the HP iPAQ rx3715.
@@ -156,7 +160,6 @@
config S3C2410_PM
bool
- depends on CONFIG_PM
help
Power Management code common to S3C2410 and better
@@ -171,7 +174,7 @@
bool
depends on ARCH_S3C2410
select S3C2410_CLOCK
- select S3C2410_PM
+ select S3C2410_PM if PM
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
@@ -186,14 +189,13 @@
config S3C2412_PM
bool
- default y if PM
- depends on CPU_S3C2412
help
Internal config node to apply S3C2412 power management
config CPU_S3C2412
bool
depends on ARCH_S3C2410
+ select S3C2412_PM if PM
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
@@ -207,7 +209,7 @@
bool
depends on ARCH_S3C2410
select S3C2410_CLOCK
- select S3C2410_PM
+ select S3C2410_PM if PM
select CPU_S3C244X
help
Support for S3C2440 Samsung Mobile CPU based systems.
@@ -216,7 +218,7 @@
bool
depends on ARCH_S3C2420
select S3C2410_CLOCK
- select S3C2410_PM
+ select S3C2410_PM if PM
select CPU_S3C244X
help
Support for S3C2442 Samsung Mobile CPU based systems.
@@ -300,8 +302,9 @@
config PM_SIMTEC
bool
- depends on PM && (ARCH_BAST || MACH_VR1000 || MACH_AML_M5900)
- default y
+ help
+ Common power management code for systems that are
+ compatible with the Simtec style of power management
config S3C2410_LOWLEVEL_UART_PORT
int "S3C2410 UART to use for low-level messages"
diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/mach-s3c2410/cpu.c
index 9d4899e..ae1f5bb 100644
--- a/arch/arm/mach-s3c2410/cpu.c
+++ b/arch/arm/mach-s3c2410/cpu.c
@@ -26,6 +26,7 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/hardware.h>
diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c
index cae35ff..faccde2 100644
--- a/arch/arm/mach-s3c2410/devs.c
+++ b/arch/arm/mach-s3c2410/devs.c
@@ -17,6 +17,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 01abb0a..717322a 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2410/dma.c
*
- * (c) 2003-2005,2006 Simtec Electronics
+ * Copyright (c) 2003-2005,2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 DMA core
diff --git a/arch/arm/mach-s3c2410/irq.h b/arch/arm/mach-s3c2410/irq.h
index 3686a00..e5913da 100644
--- a/arch/arm/mach-s3c2410/irq.h
+++ b/arch/arm/mach-s3c2410/irq.h
@@ -8,8 +8,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * Modifications:
*/
#define irqdbf(x...)
diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c
index e94cdcd..0fad0c2 100644
--- a/arch/arm/mach-s3c2410/mach-anubis.c
+++ b/arch/arm/mach-s3c2410/mach-anubis.c
@@ -15,6 +15,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 2968fb2..b8b7675 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -16,6 +16,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/dm9000.h>
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index f5b9809..15b625e 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -17,6 +17,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
@@ -37,8 +38,6 @@
#include <asm/arch/h1940-latch.h>
#include <asm/arch/fb.h>
-#include <linux/serial_core.h>
-
#include "clock.h"
#include "devs.h"
#include "cpu.h"
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 116ac31..0411e9a 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -20,6 +20,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/kthread.h>
@@ -37,8 +38,6 @@
#include <asm/arch/regs-gpio.h>
#include <asm/arch/iic.h>
-#include <linux/serial_core.h>
-
#include "s3c2410.h"
#include "clock.h"
#include "devs.h"
diff --git a/arch/arm/mach-s3c2410/mach-nexcoder.c b/arch/arm/mach-s3c2410/mach-nexcoder.c
index 065a1d4..d6dfdad 100644
--- a/arch/arm/mach-s3c2410/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2410/mach-nexcoder.c
@@ -19,6 +19,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/string.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/mtd/map.h>
diff --git a/arch/arm/mach-s3c2410/mach-osiris.c b/arch/arm/mach-s3c2410/mach-osiris.c
index a4ab144..37b4085 100644
--- a/arch/arm/mach-s3c2410/mach-osiris.c
+++ b/arch/arm/mach-s3c2410/mach-osiris.c
@@ -16,6 +16,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/serial_core.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index c71673f..2c738b3 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -15,6 +15,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index b3b0171..01c0c98 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -35,6 +35,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-s3c2410/mach-smdk2413.c b/arch/arm/mach-s3c2410/mach-smdk2413.c
index 3a4ca7f..4f89abd7 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2413.c
@@ -17,6 +17,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c
index e2205ff..2b61f4e 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2440.c
@@ -19,6 +19,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index e2eda39..a382fc0 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -352,7 +352,7 @@
static struct platform_device vr1000_led3 = {
.name = "s3c24xx_led",
- .id = 1,
+ .id = 3,
.dev = {
.platform_data = &vr1000_led3_pdata,
},
diff --git a/arch/arm/mach-s3c2410/mach-vstms.c b/arch/arm/mach-s3c2410/mach-vstms.c
index ea554e7..0360e10 100644
--- a/arch/arm/mach-s3c2410/mach-vstms.c
+++ b/arch/arm/mach-s3c2410/mach-vstms.c
@@ -15,6 +15,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c
index 42cd05e2..619133e 100644
--- a/arch/arm/mach-s3c2410/pm-simtec.c
+++ b/arch/arm/mach-s3c2410/pm-simtec.c
@@ -27,7 +27,6 @@
#include <asm/io.h>
#include <asm/arch/map.h>
-#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-mem.h>
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index b49a0b3..0083409 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -34,6 +34,7 @@
#include <linux/crc32.h>
#include <linux/ioport.h>
#include <linux/delay.h>
+#include <linux/serial_core.h>
#include <asm/cacheflush.h>
#include <asm/hardware.h>
diff --git a/arch/arm/mach-s3c2410/s3c2410-clock.c b/arch/arm/mach-s3c2410/s3c2410-clock.c
index 00abe19..992cc6a 100644
--- a/arch/arm/mach-s3c2410/s3c2410-clock.c
+++ b/arch/arm/mach-s3c2410/s3c2410-clock.c
@@ -30,13 +30,18 @@
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/map.h>
#include <asm/hardware.h>
#include <asm/io.h>
+#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-clock.h>
#include <asm/arch/regs-gpio.h>
+#include "s3c2410.h"
#include "clock.h"
#include "cpu.h"
diff --git a/arch/arm/mach-s3c2410/s3c2410-dma.c b/arch/arm/mach-s3c2410/s3c2410-dma.c
index 51e5098..e67ba39 100644
--- a/arch/arm/mach-s3c2410/s3c2410-dma.c
+++ b/arch/arm/mach-s3c2410/s3c2410-dma.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2410/s3c2410-dma.c
*
- * (c) 2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 DMA selection
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sysdev.h>
+#include <linux/serial_core.h>
#include <asm/dma.h>
#include <asm/arch/dma.h>
@@ -131,6 +132,7 @@
return s3c24xx_dma_init_map(&s3c2410_dma_sel);
}
+#if defined(CONFIG_CPU_S3C2410)
static struct sysdev_driver s3c2410_dma_driver = {
.add = s3c2410_dma_add,
};
@@ -141,9 +143,10 @@
}
arch_initcall(s3c2410_dma_init);
+#endif
+#if defined(CONFIG_CPU_S3C2442)
/* S3C2442 DMA contains the same selection table as the S3C2410 */
-
static struct sysdev_driver s3c2442_dma_driver = {
.add = s3c2410_dma_add,
};
@@ -154,5 +157,5 @@
}
arch_initcall(s3c2442_dma_init);
-
+#endif
diff --git a/arch/arm/mach-s3c2410/s3c2410-pm.c b/arch/arm/mach-s3c2410/s3c2410-pm.c
index 77c6814..8bb6e5e 100644
--- a/arch/arm/mach-s3c2410/s3c2410-pm.c
+++ b/arch/arm/mach-s3c2410/s3c2410-pm.c
@@ -87,7 +87,7 @@
}
-int s3c2410_pm_resume(struct sys_device *dev)
+static int s3c2410_pm_resume(struct sys_device *dev)
{
unsigned long tmp;
@@ -111,6 +111,7 @@
return 0;
}
+#if defined(CONFIG_CPU_S3C2410)
static struct sysdev_driver s3c2410_pm_driver = {
.add = s3c2410_pm_add,
.resume = s3c2410_pm_resume,
@@ -124,7 +125,9 @@
}
arch_initcall(s3c2410_pm_drvinit);
+#endif
+#if defined(CONFIG_CPU_S3C2440)
static struct sysdev_driver s3c2440_pm_driver = {
.add = s3c2410_pm_add,
.resume = s3c2410_pm_resume,
@@ -136,7 +139,9 @@
}
arch_initcall(s3c2440_pm_drvinit);
+#endif
+#if defined(CONFIG_CPU_S3C2442)
static struct sysdev_driver s3c2442_pm_driver = {
.add = s3c2410_pm_add,
.resume = s3c2410_pm_resume,
@@ -148,3 +153,4 @@
}
arch_initcall(s3c2442_pm_drvinit);
+#endif
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 183e403..4cdc0d7 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -17,6 +17,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/sysdev.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
@@ -38,11 +39,9 @@
/* Initial IO mappings */
static struct map_desc s3c2410_iodesc[] __initdata = {
- IODESC_ENT(USBHOST),
IODESC_ENT(CLKPWR),
IODESC_ENT(LCD),
IODESC_ENT(TIMER),
- IODESC_ENT(ADC),
IODESC_ENT(WATCHDOG),
};
diff --git a/arch/arm/mach-s3c2410/s3c2412-clock.c b/arch/arm/mach-s3c2410/s3c2412-clock.c
index c95ed3e..8f94ad8 100644
--- a/arch/arm/mach-s3c2410/s3c2412-clock.c
+++ b/arch/arm/mach-s3c2410/s3c2412-clock.c
@@ -30,13 +30,18 @@
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/map.h>
#include <asm/hardware.h>
#include <asm/io.h>
+#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-clock.h>
#include <asm/arch/regs-gpio.h>
+#include "s3c2412.h"
#include "clock.h"
#include "cpu.h"
@@ -49,7 +54,7 @@
* set the correct muxing at initialisation
*/
-int s3c2412_clkcon_enable(struct clk *clk, int enable)
+static int s3c2412_clkcon_enable(struct clk *clk, int enable)
{
unsigned int clocks = clk->ctrlbit;
unsigned long clkcon;
@@ -556,7 +561,7 @@
struct clk *src_1;
};
-struct clk_init clks_src[] __initdata = {
+static struct clk_init clks_src[] __initdata = {
{
.clk = &clk_usysclk,
.bit = S3C2412_CLKSRC_USBCLK_HCLK,
@@ -619,7 +624,7 @@
/* clocks to add straight away */
-struct clk *clks[] __initdata = {
+static struct clk *clks[] __initdata = {
&clk_ext,
&clk_usb_bus,
&clk_erefclk,
diff --git a/arch/arm/mach-s3c2410/s3c2412-dma.c b/arch/arm/mach-s3c2410/s3c2412-dma.c
index 171f370..fe71a8f 100644
--- a/arch/arm/mach-s3c2410/s3c2412-dma.c
+++ b/arch/arm/mach-s3c2410/s3c2412-dma.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2410/s3c2412-dma.c
*
- * (c) 2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2412 DMA selection
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sysdev.h>
+#include <linux/serial_core.h>
#include <asm/dma.h>
#include <asm/arch/dma.h>
diff --git a/arch/arm/mach-s3c2410/s3c2412.c b/arch/arm/mach-s3c2410/s3c2412.c
index e76431c..2f651a8 100644
--- a/arch/arm/mach-s3c2410/s3c2412.c
+++ b/arch/arm/mach-s3c2410/s3c2412.c
@@ -17,6 +17,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/sysdev.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
@@ -60,7 +61,6 @@
IODESC_ENT(CLKPWR),
IODESC_ENT(LCD),
IODESC_ENT(TIMER),
- IODESC_ENT(ADC),
IODESC_ENT(WATCHDOG),
};
diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2410/s3c2440-clock.c
index 1579686..ba13c1d 100644
--- a/arch/arm/mach-s3c2410/s3c2440-clock.c
+++ b/arch/arm/mach-s3c2410/s3c2440-clock.c
@@ -113,18 +113,18 @@
{
unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
unsigned long clkdivn;
- struct clk *clk_h;
- struct clk *clk_p;
- struct clk *clk_upll;
+ struct clk *clock_h;
+ struct clk *clock_p;
+ struct clk *clock_upll;
printk("S3C2440: Clock Support, DVS %s\n",
(camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
- clk_p = clk_get(NULL, "pclk");
- clk_h = clk_get(NULL, "hclk");
- clk_upll = clk_get(NULL, "upll");
+ clock_p = clk_get(NULL, "pclk");
+ clock_h = clk_get(NULL, "hclk");
+ clock_upll = clk_get(NULL, "upll");
- if (IS_ERR(clk_p) || IS_ERR(clk_h) || IS_ERR(clk_upll)) {
+ if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
return -EINVAL;
}
@@ -132,8 +132,8 @@
/* check rate of UPLL, and if it is near 96MHz, then change
* to using half the UPLL rate for the system */
- if (clk_get_rate(clk_upll) > (94 * MHZ)) {
- clk_usb_bus.rate = clk_get_rate(clk_upll) / 2;
+ if (clk_get_rate(clock_upll) > (94 * MHZ)) {
+ clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
mutex_lock(&clocks_mutex);
@@ -144,9 +144,9 @@
mutex_unlock(&clocks_mutex);
}
- s3c2440_clk_cam.parent = clk_h;
- s3c2440_clk_ac97.parent = clk_p;
- s3c2440_clk_cam_upll.parent = clk_upll;
+ s3c2440_clk_cam.parent = clock_h;
+ s3c2440_clk_ac97.parent = clock_p;
+ s3c2440_clk_cam_upll.parent = clock_upll;
s3c24xx_register_clock(&s3c2440_clk_ac97);
s3c24xx_register_clock(&s3c2440_clk_cam);
diff --git a/arch/arm/mach-s3c2410/s3c2440-dma.c b/arch/arm/mach-s3c2410/s3c2440-dma.c
index 11e109c..47b861b 100644
--- a/arch/arm/mach-s3c2410/s3c2440-dma.c
+++ b/arch/arm/mach-s3c2410/s3c2440-dma.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2410/s3c2440-dma.c
*
- * (c) 2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2440 DMA selection
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sysdev.h>
+#include <linux/serial_core.h>
#include <asm/dma.h>
#include <asm/arch/dma.h>
diff --git a/arch/arm/mach-s3c2410/s3c2440.c b/arch/arm/mach-s3c2410/s3c2440.c
index 0ab50f4..344eb27 100644
--- a/arch/arm/mach-s3c2410/s3c2440.c
+++ b/arch/arm/mach-s3c2410/s3c2440.c
@@ -17,6 +17,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/serial_core.h>
#include <linux/sysdev.h>
#include <linux/clk.h>
@@ -28,17 +29,9 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-dsc.h>
-
#include "s3c2440.h"
-#include "clock.h"
#include "devs.h"
#include "cpu.h"
-#include "pm.h"
static struct sys_device s3c2440_sysdev = {
.cls = &s3c2440_sysclass,
diff --git a/arch/arm/mach-s3c2410/s3c2440.h b/arch/arm/mach-s3c2410/s3c2440.h
index 29cb6df..dcd3160 100644
--- a/arch/arm/mach-s3c2410/s3c2440.h
+++ b/arch/arm/mach-s3c2410/s3c2440.h
@@ -8,28 +8,10 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * Modifications:
- * 24-Aug-2004 BJD Start of S3C2440 CPU support
- * 04-Nov-2004 BJD Added s3c2440_init_uarts()
- * 04-Jan-2005 BJD Moved uart init to cpu code
- * 10-Jan-2005 BJD Moved 2440 specific init here
- * 14-Jan-2005 BJD Split the clock initialisation code
*/
#ifdef CONFIG_CPU_S3C2440
-
extern int s3c2440_init(void);
-
-extern void s3c2440_map_io(struct map_desc *mach_desc, int size);
-
-extern void s3c2440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2440_init_clocks(int xtal);
-
#else
-#define s3c2440_init_clocks NULL
-#define s3c2440_init_uarts NULL
-#define s3c2440_map_io NULL
#define s3c2440_init NULL
#endif
diff --git a/arch/arm/mach-s3c2410/s3c2442-clock.c b/arch/arm/mach-s3c2410/s3c2442-clock.c
index d9f54b5..4e292ca 100644
--- a/arch/arm/mach-s3c2410/s3c2442-clock.c
+++ b/arch/arm/mach-s3c2410/s3c2442-clock.c
@@ -117,18 +117,18 @@
{
unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
unsigned long clkdivn;
- struct clk *clk_h;
- struct clk *clk_p;
- struct clk *clk_upll;
+ struct clk *clock_h;
+ struct clk *clock_p;
+ struct clk *clock_upll;
printk("S3C2442: Clock Support, DVS %s\n",
(camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
- clk_p = clk_get(NULL, "pclk");
- clk_h = clk_get(NULL, "hclk");
- clk_upll = clk_get(NULL, "upll");
+ clock_p = clk_get(NULL, "pclk");
+ clock_h = clk_get(NULL, "hclk");
+ clock_upll = clk_get(NULL, "upll");
- if (IS_ERR(clk_p) || IS_ERR(clk_h) || IS_ERR(clk_upll)) {
+ if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
return -EINVAL;
}
@@ -136,8 +136,8 @@
/* check rate of UPLL, and if it is near 96MHz, then change
* to using half the UPLL rate for the system */
- if (clk_get_rate(clk_upll) > (94 * MHZ)) {
- clk_usb_bus.rate = clk_get_rate(clk_upll) / 2;
+ if (clk_get_rate(clock_upll) > (94 * MHZ)) {
+ clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
mutex_lock(&clocks_mutex);
@@ -148,8 +148,8 @@
mutex_unlock(&clocks_mutex);
}
- s3c2442_clk_cam.parent = clk_h;
- s3c2442_clk_cam_upll.parent = clk_upll;
+ s3c2442_clk_cam.parent = clock_h;
+ s3c2442_clk_cam_upll.parent = clock_upll;
s3c24xx_register_clock(&s3c2442_clk_cam);
s3c24xx_register_clock(&s3c2442_clk_cam_upll);
diff --git a/arch/arm/mach-s3c2410/s3c2442.c b/arch/arm/mach-s3c2410/s3c2442.c
index 581667e..428732e 100644
--- a/arch/arm/mach-s3c2410/s3c2442.c
+++ b/arch/arm/mach-s3c2410/s3c2442.c
@@ -16,29 +16,11 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
+#include <linux/serial_core.h>
#include <linux/sysdev.h>
-#include <linux/clk.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-dsc.h>
#include "s3c2442.h"
-#include "clock.h"
-#include "devs.h"
#include "cpu.h"
-#include "pm.h"
static struct sys_device s3c2442_sysdev = {
.cls = &s3c2442_sysclass,
diff --git a/arch/arm/mach-s3c2410/s3c244x.c b/arch/arm/mach-s3c2410/s3c244x.c
index 9a22582..23c7494 100644
--- a/arch/arm/mach-s3c2410/s3c244x.c
+++ b/arch/arm/mach-s3c2410/s3c244x.c
@@ -16,6 +16,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/clk.h>
@@ -47,8 +48,6 @@
IODESC_ENT(TIMER),
IODESC_ENT(WATCHDOG),
IODESC_ENT(LCD),
- IODESC_ENT(ADC),
- IODESC_ENT(USBHOST),
};
/* uart initialisation */
diff --git a/arch/arm/mach-s3c2410/usb-simtec.h b/arch/arm/mach-s3c2410/usb-simtec.h
index d8aa612..03842ed 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.h
+++ b/arch/arm/mach-s3c2410/usb-simtec.h
@@ -10,9 +10,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * Modifications:
- * 20-Aug-2004 BJD Created
*/
extern int usb_simtec_init(void);
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 3bb3951..251685f 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -292,6 +292,8 @@
if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK))
return NULL;
+ size = PAGE_ALIGN(size);
+
area = get_vm_area(size, VM_IOREMAP);
if (!area)
return NULL;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index f028aef..655c837 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -154,6 +154,26 @@
}
__setup("noalign", noalign_setup);
+#ifndef CONFIG_SMP
+void adjust_cr(unsigned long mask, unsigned long set)
+{
+ unsigned long flags;
+
+ mask &= ~CR_A;
+
+ set &= mask;
+
+ local_irq_save(flags);
+
+ cr_no_alignment = (cr_no_alignment & ~mask) | set;
+ cr_alignment = (cr_alignment & ~mask) | set;
+
+ set_cr((get_cr() & ~mask) | set);
+
+ local_irq_restore(flags);
+}
+#endif
+
struct mem_types {
unsigned int prot_pte;
unsigned int prot_l1;
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 43494ae..94a5845 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -2,7 +2,7 @@
* linux/arch/arm/mm/proc-xsc3.S
*
* Original Author: Matthew Gilbert
- * Current Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ * Current Maintainer: Lennert Buytenhek <buytenh@wantstofly.org>
*
* Copyright 2004 (C) Intel Corp.
* Copyright 2005 (c) MontaVista Software, Inc.
diff --git a/arch/i386/defconfig b/arch/i386/defconfig
index 3265208..e075ff0 100644
--- a/arch/i386/defconfig
+++ b/arch/i386/defconfig
@@ -1493,8 +1493,6 @@
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
-CONFIG_UNWIND_INFO=y
-CONFIG_STACK_UNWIND=y
# CONFIG_FORCED_INLINING is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
index 18f4715..b735458 100644
--- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -126,27 +126,6 @@
}
}
-static void wrport(u16 port, u8 bit_width, u32 value)
-{
- if (bit_width <= 8)
- outb(value, port);
- else if (bit_width <= 16)
- outw(value, port);
- else if (bit_width <= 32)
- outl(value, port);
-}
-
-static void rdport(u16 port, u8 bit_width, u32 * ret)
-{
- *ret = 0;
- if (bit_width <= 8)
- *ret = inb(port);
- else if (bit_width <= 16)
- *ret = inw(port);
- else if (bit_width <= 32)
- *ret = inl(port);
-}
-
struct msr_addr {
u32 reg;
};
@@ -177,7 +156,9 @@
rdmsr(cmd->addr.msr.reg, cmd->val, h);
break;
case SYSTEM_IO_CAPABLE:
- rdport(cmd->addr.io.port, cmd->addr.io.bit_width, &cmd->val);
+ acpi_os_read_port((acpi_io_address)cmd->addr.io.port,
+ &cmd->val,
+ (u32)cmd->addr.io.bit_width);
break;
default:
break;
@@ -193,7 +174,9 @@
wrmsr(cmd->addr.msr.reg, cmd->val, h);
break;
case SYSTEM_IO_CAPABLE:
- wrport(cmd->addr.io.port, cmd->addr.io.bit_width, cmd->val);
+ acpi_os_write_port((acpi_io_address)cmd->addr.io.port,
+ cmd->val,
+ (u32)cmd->addr.io.bit_width);
break;
default:
break;
@@ -699,14 +682,14 @@
if (result)
goto err_freqfree;
- switch (data->cpu_feature) {
+ switch (perf->control_register.space_id) {
case ACPI_ADR_SPACE_SYSTEM_IO:
/* Current speed is unknown and not detectable by IO port */
policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu);
break;
case ACPI_ADR_SPACE_FIXED_HARDWARE:
acpi_cpufreq_driver.get = get_cur_freq_on_cpu;
- get_cur_freq_on_cpu(cpu);
+ policy->cur = get_cur_freq_on_cpu(cpu);
break;
default:
break;
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c
index c548daa..6d9c97a 100644
--- a/arch/i386/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c
@@ -787,8 +787,10 @@
switch (c->x86_model) {
case 6 ... 9:
return cpufreq_register_driver(&longhaul_driver);
+ case 10:
+ printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n");
default:
- printk (KERN_INFO PFX "Unknown VIA CPU. Contact davej@codemonkey.org.uk\n");
+ ;;
}
return -ENODEV;
diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S
index de34b7fe..06461b8 100644
--- a/arch/i386/kernel/entry.S
+++ b/arch/i386/kernel/entry.S
@@ -979,38 +979,6 @@
jmp error_code
CFI_ENDPROC
-#ifdef CONFIG_STACK_UNWIND
-ENTRY(arch_unwind_init_running)
- CFI_STARTPROC
- movl 4(%esp), %edx
- movl (%esp), %ecx
- leal 4(%esp), %eax
- movl %ebx, PT_EBX(%edx)
- xorl %ebx, %ebx
- movl %ebx, PT_ECX(%edx)
- movl %ebx, PT_EDX(%edx)
- movl %esi, PT_ESI(%edx)
- movl %edi, PT_EDI(%edx)
- movl %ebp, PT_EBP(%edx)
- movl %ebx, PT_EAX(%edx)
- movl $__USER_DS, PT_DS(%edx)
- movl $__USER_DS, PT_ES(%edx)
- movl $0, PT_GS(%edx)
- movl %ebx, PT_ORIG_EAX(%edx)
- movl %ecx, PT_EIP(%edx)
- movl 12(%esp), %ecx
- movl $__KERNEL_CS, PT_CS(%edx)
- movl %ebx, PT_EFLAGS(%edx)
- movl %eax, PT_OLDESP(%edx)
- movl 8(%esp), %eax
- movl %ecx, 8(%esp)
- movl PT_EBX(%edx), %ebx
- movl $__KERNEL_DS, PT_OLDSS(%edx)
- jmpl *%eax
- CFI_ENDPROC
-ENDPROC(arch_unwind_init_running)
-#endif
-
ENTRY(kernel_thread_helper)
pushl $0 # fake return address for unwinder
CFI_STARTPROC
diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
index 2b30dbf..0efad8a 100644
--- a/arch/i386/kernel/traps.c
+++ b/arch/i386/kernel/traps.c
@@ -94,11 +94,6 @@
asmlinkage void machine_check(void);
int kstack_depth_to_print = 24;
-#ifdef CONFIG_STACK_UNWIND
-static int call_trace = 1;
-#else
-#define call_trace (-1)
-#endif
ATOMIC_NOTIFIER_HEAD(i386die_chain);
int register_die_notifier(struct notifier_block *nb)
@@ -152,33 +147,6 @@
return ebp;
}
-struct ops_and_data {
- struct stacktrace_ops *ops;
- void *data;
-};
-
-static asmlinkage int
-dump_trace_unwind(struct unwind_frame_info *info, void *data)
-{
- struct ops_and_data *oad = (struct ops_and_data *)data;
- int n = 0;
- unsigned long sp = UNW_SP(info);
-
- if (arch_unw_user_mode(info))
- return -1;
- while (unwind(info) == 0 && UNW_PC(info)) {
- n++;
- oad->ops->address(oad->data, UNW_PC(info));
- if (arch_unw_user_mode(info))
- break;
- if ((sp & ~(PAGE_SIZE - 1)) == (UNW_SP(info) & ~(PAGE_SIZE - 1))
- && sp > UNW_SP(info))
- break;
- sp = UNW_SP(info);
- }
- return n;
-}
-
#define MSG(msg) ops->warning(data, msg)
void dump_trace(struct task_struct *task, struct pt_regs *regs,
@@ -190,41 +158,6 @@
if (!task)
task = current;
- if (call_trace >= 0) {
- int unw_ret = 0;
- struct unwind_frame_info info;
- struct ops_and_data oad = { .ops = ops, .data = data };
-
- if (regs) {
- if (unwind_init_frame_info(&info, task, regs) == 0)
- unw_ret = dump_trace_unwind(&info, &oad);
- } else if (task == current)
- unw_ret = unwind_init_running(&info, dump_trace_unwind,
- &oad);
- else {
- if (unwind_init_blocked(&info, task) == 0)
- unw_ret = dump_trace_unwind(&info, &oad);
- }
- if (unw_ret > 0) {
- if (call_trace == 1 && !arch_unw_user_mode(&info)) {
- ops->warning_symbol(data,
- "DWARF2 unwinder stuck at %s",
- UNW_PC(&info));
- if (UNW_SP(&info) >= PAGE_OFFSET) {
- MSG("Leftover inexact backtrace:");
- stack = (void *)UNW_SP(&info);
- if (!stack)
- return;
- ebp = UNW_FP(&info);
- } else
- MSG("Full inexact backtrace again:");
- } else if (call_trace >= 1)
- return;
- else
- MSG("Full inexact backtrace again:");
- } else
- MSG("Inexact backtrace:");
- }
if (!stack) {
unsigned long dummy;
stack = &dummy;
@@ -1258,19 +1191,3 @@
return 1;
}
__setup("kstack=", kstack_setup);
-
-#ifdef CONFIG_STACK_UNWIND
-static int __init call_trace_setup(char *s)
-{
- if (strcmp(s, "old") == 0)
- call_trace = -1;
- else if (strcmp(s, "both") == 0)
- call_trace = 0;
- else if (strcmp(s, "newfallback") == 0)
- call_trace = 1;
- else if (strcmp(s, "new") == 2)
- call_trace = 2;
- return 1;
-}
-__setup("call_trace=", call_trace_setup);
-#endif
diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c
index cde1170..8053b17 100644
--- a/arch/i386/pci/fixup.c
+++ b/arch/i386/pci/fixup.c
@@ -115,7 +115,7 @@
#define VIA_8363_KL133_REVISION_ID 0x81
#define VIA_8363_KM133_REVISION_ID 0x84
-static void __devinit pci_fixup_via_northbridge_bug(struct pci_dev *d)
+static void pci_fixup_via_northbridge_bug(struct pci_dev *d)
{
u8 v;
u8 revision;
@@ -151,6 +151,10 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug);
/*
* For some reasons Intel decided that certain parts of their
@@ -181,7 +185,7 @@
* issue another HALT within 80 ns of the initial HALT, the failure condition
* is avoided.
*/
-static void __init pci_fixup_nforce2(struct pci_dev *dev)
+static void pci_fixup_nforce2(struct pci_dev *dev)
{
u32 val;
@@ -204,6 +208,7 @@
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2);
/* Max PCI Express root ports */
#define MAX_PCIEROOT 6
@@ -419,7 +424,7 @@
* Prevent the BIOS trapping accesses to the Cyrix CS5530A video device
* configuration space.
*/
-static void __devinit pci_early_fixup_cyrix_5530(struct pci_dev *dev)
+static void pci_early_fixup_cyrix_5530(struct pci_dev *dev)
{
u8 r;
/* clear 'F4 Video Configuration Trap' bit */
@@ -429,3 +434,5 @@
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY,
pci_early_fixup_cyrix_5530);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY,
+ pci_early_fixup_cyrix_5530);
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 343dbcf..98392fb 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -152,6 +152,9 @@
$(obj)/zImage.ps3: vmlinux
$(STRIP) -s -R .comment $< -o $@
+$(obj)/zImage.initrd.ps3: vmlinux
+ @echo " WARNING zImage.initrd.ps3 not supported (yet)"
+
$(obj)/uImage: vmlinux $(wrapperbits)
$(call cmd,wrap,uboot)
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index a98c982..d1d2515 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc6
-# Wed Nov 22 15:33:04 2006
+# Linux kernel version: 2.6.20-rc1
+# Tue Dec 19 14:59:53 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
@@ -10,6 +10,8 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -23,6 +25,7 @@
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
#
@@ -66,6 +69,7 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -128,14 +132,16 @@
# CONFIG_APUS is not set
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_ISERIES is not set
+# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_NATIVE=y
CONFIG_PPC_IBM_CELL_BLADE=y
-CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_PPC_PS3=y
+CONFIG_PPC_NATIVE=y
+CONFIG_UDBG_RTAS_CONSOLE=y
# CONFIG_U3_DART is not set
CONFIG_PPC_RTAS=y
# CONFIG_RTAS_ERROR_LOGGING is not set
@@ -177,12 +183,14 @@
CONFIG_PS3_HTAB_SIZE=20
# CONFIG_PS3_DYNAMIC_DMA is not set
CONFIG_PS3_USE_LPAR_ADDR=y
+CONFIG_PS3_VUART=y
#
# Kernel options
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
@@ -237,6 +245,7 @@
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
#
@@ -270,7 +279,10 @@
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
@@ -289,6 +301,7 @@
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
@@ -317,31 +330,67 @@
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_XTABLES is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=y
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
#
# DCCP Configuration (EXPERIMENTAL)
@@ -373,6 +422,7 @@
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@@ -428,6 +478,7 @@
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
@@ -457,6 +508,7 @@
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
@@ -468,7 +520,6 @@
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
@@ -492,6 +543,7 @@
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=y
+# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
@@ -505,8 +557,74 @@
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=m
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
@@ -538,6 +656,9 @@
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -552,6 +673,7 @@
#
# Macintosh device drivers
#
+# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
#
@@ -559,7 +681,7 @@
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
-CONFIG_BONDING=y
+CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
@@ -604,11 +726,11 @@
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=m
-# CONFIG_SKY2 is not set
+CONFIG_SKY2=m
# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
+CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
-CONFIG_SPIDER_NET=m
+CONFIG_SPIDER_NET=y
# CONFIG_QLA3XXX is not set
#
@@ -618,6 +740,7 @@
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
@@ -637,6 +760,7 @@
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
@@ -703,6 +827,7 @@
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_MOXA_SMARTIO_NEW is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
@@ -729,6 +854,7 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_HVC_DRIVER=y
@@ -756,16 +882,17 @@
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
@@ -855,12 +982,14 @@
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
#
# Console display driver support
@@ -875,18 +1004,145 @@
# CONFIG_SOUND is not set
#
+# HID Devices
+#
+CONFIG_HID=m
+
+#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -912,7 +1168,7 @@
#
# InfiniBand support
#
-CONFIG_INFINIBAND=y
+CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_ADDR_TRANS=y
@@ -922,6 +1178,8 @@
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
+# CONFIG_INFINIBAND_SRP is not set
+# CONFIG_INFINIBAND_ISER is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
@@ -946,6 +1204,10 @@
#
#
+# Virtualization
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
@@ -1028,23 +1290,18 @@
#
# Network File Systems
#
-CONFIG_NFS_FS=m
+CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
+CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1120,8 +1377,14 @@
# CONFIG_NLS_UTF8 is not set
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
@@ -1130,7 +1393,10 @@
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
@@ -1146,6 +1412,8 @@
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
@@ -1159,12 +1427,11 @@
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FORCED_INLINING is not set
-# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
@@ -1191,6 +1458,7 @@
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
@@ -1199,8 +1467,10 @@
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index 3002ea3..b734517 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -50,6 +50,7 @@
{ .type = "plb5", },
{ .type = "plb4", },
{ .type = "opb", },
+ { .type = "ebc", },
{},
};
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index a6b7692..73c59ec 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -360,6 +360,7 @@
DBG(" class: 0x%x\n", dev->class);
dev->current_state = 4; /* unknown power state */
+ dev->error_state = pci_channel_io_normal;
if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
/* a PCI-PCI bridge */
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 0dfbe1c..12c51e4 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -920,9 +920,20 @@
/*
* Old machines just have a list of interrupt numbers
- * and no interrupt-controller nodes.
+ * and no interrupt-controller nodes. We also have dodgy
+ * cases where the APPL,interrupts property is completely
+ * missing behind pci-pci bridges and we have to get it
+ * from the parent (the bridge itself, as apple just wired
+ * everything together on these)
*/
- ints = get_property(device, "AAPL,interrupts", &intlen);
+ while (device) {
+ ints = get_property(device, "AAPL,interrupts", &intlen);
+ if (ints != NULL)
+ break;
+ device = device->parent;
+ if (device && strcmp(device->type, "pci") != 0)
+ break;
+ }
if (ints == NULL)
return -EINVAL;
intlen /= sizeof(u32);
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index e4ebe1a..6b405a3 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -835,11 +835,21 @@
return -EINVAL;
if (old_ctx != NULL) {
+ struct mcontext __user *mctx;
+
+ /*
+ * old_ctx might not be 16-byte aligned, in which
+ * case old_ctx->uc_mcontext won't be either.
+ * Because we have the old_ctx->uc_pad2 field
+ * before old_ctx->uc_mcontext, we need to round down
+ * from &old_ctx->uc_mcontext to a 16-byte boundary.
+ */
+ mctx = (struct mcontext __user *)
+ ((unsigned long) &old_ctx->uc_mcontext & ~0xfUL);
if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx))
- || save_user_regs(regs, &old_ctx->uc_mcontext, 0)
+ || save_user_regs(regs, mctx, 0)
|| put_sigset_t(&old_ctx->uc_sigmask, ¤t->blocked)
- || __put_user(to_user_ptr(&old_ctx->uc_mcontext),
- &old_ctx->uc_regs))
+ || __put_user(to_user_ptr(mctx), &old_ctx->uc_regs))
return -EFAULT;
}
if (new_ctx == NULL)
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index 44d95ea..507d1b9 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -5,9 +5,9 @@
obj-$(CONFIG_PPC_PMAC) += powermac/
endif
endif
+obj-$(CONFIG_PPC_MPC52xx) += 52xx/
obj-$(CONFIG_PPC_CHRP) += chrp/
obj-$(CONFIG_4xx) += 4xx/
-obj-$(CONFIG_PPC_MPC52xx) += 52xx/
obj-$(CONFIG_PPC_83xx) += 83xx/
obj-$(CONFIG_PPC_85xx) += 85xx/
obj-$(CONFIG_PPC_86xx) += 86xx/
diff --git a/arch/powerpc/platforms/cell/io-workarounds.c b/arch/powerpc/platforms/cell/io-workarounds.c
index 580d425..7c73128 100644
--- a/arch/powerpc/platforms/cell/io-workarounds.c
+++ b/arch/powerpc/platforms/cell/io-workarounds.c
@@ -37,7 +37,7 @@
*/
#define SPIDER_DISABLE_PREFETCH
-#define MAX_SPIDERS 2
+#define MAX_SPIDERS 3
static struct spider_pci_bus {
void __iomem *regs;
diff --git a/arch/powerpc/platforms/cell/spu_priv1_mmio.c b/arch/powerpc/platforms/cell/spu_priv1_mmio.c
index a5de043..910a926 100644
--- a/arch/powerpc/platforms/cell/spu_priv1_mmio.c
+++ b/arch/powerpc/platforms/cell/spu_priv1_mmio.c
@@ -37,8 +37,9 @@
#include "interrupt.h"
#include "spu_priv1_mmio.h"
+static DEFINE_MUTEX(add_spumem_mutex);
+
struct spu_pdata {
- int nid;
struct device_node *devnode;
struct spu_priv1 __iomem *priv1;
};
@@ -56,20 +57,9 @@
EXPORT_SYMBOL_GPL(spu_devnode);
-static int __init find_spu_node_id(struct device_node *spe)
-{
- const unsigned int *id;
- struct device_node *cpu;
- cpu = spe->parent->parent;
- id = get_property(cpu, "node-id", NULL);
- return id ? *id : 0;
-}
-
static int __init cell_spuprop_present(struct spu *spu, struct device_node *spe,
const char *prop)
{
- static DEFINE_MUTEX(add_spumem_mutex);
-
const struct address_prop {
unsigned long address;
unsigned int len;
@@ -87,7 +77,7 @@
start_pfn = p->address >> PAGE_SHIFT;
nr_pages = ((unsigned long)p->len + PAGE_SIZE - 1) >> PAGE_SHIFT;
- pgdata = NODE_DATA(spu_get_pdata(spu)->nid);
+ pgdata = NODE_DATA(spu->node);
zone = pgdata->node_zones;
/* XXX rethink locking here */
@@ -140,6 +130,7 @@
{
unsigned int isrc;
const u32 *tmp;
+ int nid;
/* Get the interrupt source unit from the device-tree */
tmp = get_property(np, "isrc", NULL);
@@ -147,8 +138,15 @@
return -ENODEV;
isrc = tmp[0];
+ tmp = get_property(np->parent->parent, "node-id", NULL);
+ if (!tmp) {
+ printk(KERN_WARNING "%s: can't find node-id\n", __FUNCTION__);
+ nid = spu->node;
+ } else
+ nid = tmp[0];
+
/* Add the node number */
- isrc |= spu->node << IIC_IRQ_NODE_SHIFT;
+ isrc |= nid << IIC_IRQ_NODE_SHIFT;
/* Now map interrupts of all 3 classes */
spu->irqs[0] = irq_create_mapping(NULL, IIC_IRQ_CLASS_0 | isrc);
@@ -237,70 +235,88 @@
return ret;
}
-static int spu_map_resource(struct device_node *node, int nr,
- void __iomem** virt, unsigned long *phys)
+static int spu_map_resource(struct spu *spu, int nr,
+ void __iomem** virt, unsigned long *phys)
{
+ struct device_node *np = spu_get_pdata(spu)->devnode;
+ unsigned long start_pfn, nr_pages;
+ struct pglist_data *pgdata;
+ struct zone *zone;
struct resource resource = { };
+ unsigned long len;
int ret;
- ret = of_address_to_resource(node, nr, &resource);
+ ret = of_address_to_resource(np, nr, &resource);
if (ret)
goto out;
if (phys)
*phys = resource.start;
- *virt = ioremap(resource.start, resource.end - resource.start);
+ len = resource.end - resource.start + 1;
+ *virt = ioremap(resource.start, len);
if (!*virt)
ret = -EINVAL;
+ start_pfn = resource.start >> PAGE_SHIFT;
+ nr_pages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT;
+
+ pgdata = NODE_DATA(spu->node);
+ zone = pgdata->node_zones;
+
+ /* XXX rethink locking here */
+ mutex_lock(&add_spumem_mutex);
+ ret = __add_pages(zone, start_pfn, nr_pages);
+ mutex_unlock(&add_spumem_mutex);
+
out:
return ret;
}
-static int __init spu_map_device(struct spu *spu, struct device_node *node)
+static int __init spu_map_device(struct spu *spu)
{
+ struct device_node *np = spu_get_pdata(spu)->devnode;
int ret = -ENODEV;
- spu->name = get_property(node, "name", NULL);
+
+ spu->name = get_property(np, "name", NULL);
if (!spu->name)
goto out;
- ret = spu_map_resource(node, 0, (void __iomem**)&spu->local_store,
- &spu->local_store_phys);
+ ret = spu_map_resource(spu, 0, (void __iomem**)&spu->local_store,
+ &spu->local_store_phys);
if (ret) {
pr_debug("spu_new: failed to map %s resource 0\n",
- node->full_name);
+ np->full_name);
goto out;
}
- ret = spu_map_resource(node, 1, (void __iomem**)&spu->problem,
- &spu->problem_phys);
+ ret = spu_map_resource(spu, 1, (void __iomem**)&spu->problem,
+ &spu->problem_phys);
if (ret) {
pr_debug("spu_new: failed to map %s resource 1\n",
- node->full_name);
+ np->full_name);
goto out_unmap;
}
- ret = spu_map_resource(node, 2, (void __iomem**)&spu->priv2,
- NULL);
+ ret = spu_map_resource(spu, 2, (void __iomem**)&spu->priv2, NULL);
if (ret) {
pr_debug("spu_new: failed to map %s resource 2\n",
- node->full_name);
+ np->full_name);
goto out_unmap;
}
if (!firmware_has_feature(FW_FEATURE_LPAR))
- ret = spu_map_resource(node, 3,
- (void __iomem**)&spu_get_pdata(spu)->priv1, NULL);
+ ret = spu_map_resource(spu, 3,
+ (void __iomem**)&spu_get_pdata(spu)->priv1, NULL);
if (ret) {
pr_debug("spu_new: failed to map %s resource 3\n",
- node->full_name);
+ np->full_name);
goto out_unmap;
}
- pr_debug("spu_new: %s maps:\n", node->full_name);
+ pr_debug("spu_new: %s maps:\n", np->full_name);
pr_debug(" local store : 0x%016lx -> 0x%p\n",
spu->local_store_phys, spu->local_store);
pr_debug(" problem state : 0x%016lx -> 0x%p\n",
spu->problem_phys, spu->problem);
pr_debug(" priv2 : 0x%p\n", spu->priv2);
pr_debug(" priv1 : 0x%p\n",
- spu_get_pdata(spu)->priv1);
+ spu_get_pdata(spu)->priv1);
return 0;
@@ -340,8 +356,9 @@
ret = -ENOMEM;
goto out;
}
+ spu_get_pdata(spu)->devnode = of_node_get(spe);
- spu->node = find_spu_node_id(spe);
+ spu->node = of_node_to_nid(spe);
if (spu->node >= MAX_NUMNODES) {
printk(KERN_WARNING "SPE %s on node %d ignored,"
" node number too big\n", spe->full_name, spu->node);
@@ -350,11 +367,7 @@
goto out_free;
}
- spu_get_pdata(spu)->nid = of_node_to_nid(spe);
- if (spu_get_pdata(spu)->nid == -1)
- spu_get_pdata(spu)->nid = 0;
-
- ret = spu_map_device(spu, spe);
+ ret = spu_map_device(spu);
/* try old method */
if (ret)
ret = spu_map_device_old(spu, spe);
@@ -367,8 +380,6 @@
if (ret)
goto out_unmap;
- spu_get_pdata(spu)->devnode = of_node_get(spe);
-
pr_debug(KERN_DEBUG "Using SPE %s %p %p %p %p %d\n", spu->name,
spu->local_store, spu->problem, spu_get_pdata(spu)->priv1,
spu->priv2, spu->number);
diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
index 887b688..54e6b3b 100644
--- a/arch/powerpc/platforms/iseries/Kconfig
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -31,5 +31,5 @@
config VIOPATH
bool
- depends on VIOCONS || VIODASD || VIOCD || VIOTAPE || VETH
+ depends on VIOCONS || VIODASD || VIOCD || VIOTAPE || ISERIES_VETH
default y
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 411480d..d01ced1 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -390,7 +390,7 @@
u8 id = readb(devbase + pos + PCI_CAP_LIST_ID);
if (id == PCI_CAP_ID_HT) {
id = readb(devbase + pos + 3);
- if (id == HT_CAPTYPE_IRQ)
+ if ((id & HT_5BIT_CAP_MASK) == HT_CAPTYPE_IRQ)
break;
}
}
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index a6ec919..5368cf4 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,14 +1,15 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc2
-# Wed Oct 18 17:11:10 2006
+# Linux kernel version: 2.6.20-rc1
+# Fri Dec 15 16:52:28 2006
#
CONFIG_MMU=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_S390=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -37,12 +38,13 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -119,6 +121,7 @@
CONFIG_CHECK_STACK=y
CONFIG_STACK_GUARD=256
# CONFIG_WARN_STACK is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -128,6 +131,7 @@
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
+CONFIG_HOLES_IN_ZONE=y
#
# I/O subsystem configuration
@@ -196,6 +200,7 @@
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
@@ -211,7 +216,6 @@
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_SUBTREES is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
@@ -246,6 +250,7 @@
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_FIFO=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
@@ -277,6 +282,7 @@
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_EMATCH is not set
@@ -315,6 +321,7 @@
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
@@ -335,6 +342,7 @@
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
@@ -546,6 +554,7 @@
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
@@ -571,7 +580,7 @@
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
@@ -616,7 +625,6 @@
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
-CONFIG_GENERIC_ACL=y
#
# Partition Types
@@ -646,6 +654,14 @@
# CONFIG_NLS is not set
#
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
# Instrumentation Support
#
@@ -663,6 +679,8 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_SCHEDSTATS is not set
@@ -679,13 +697,11 @@
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
-CONFIG_HEADERS_CHECK=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_LKDTM is not set
@@ -699,10 +715,11 @@
# Cryptographic options
#
CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
@@ -713,8 +730,10 @@
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_DES_S390 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
@@ -740,8 +759,10 @@
#
# Library routines
#
+CONFIG_BITREVERSE=m
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=m
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff --git a/arch/s390/hypfs/hypfs_diag.c b/arch/s390/hypfs/hypfs_diag.c
index 443fa37..2782cf9 100644
--- a/arch/s390/hypfs/hypfs_diag.c
+++ b/arch/s390/hypfs/hypfs_diag.c
@@ -379,7 +379,7 @@
static void *diag204_alloc_rbuf(void)
{
diag204_buf = (void*)__get_free_pages(GFP_KERNEL,0);
- if (diag204_buf)
+ if (!diag204_buf)
return ERR_PTR(-ENOMEM);
diag204_buf_pages = 1;
return diag204_buf;
@@ -521,7 +521,7 @@
}
rc = diag224_get_name_table();
if (rc) {
- diag224_delete_name_table();
+ diag204_free_buffer();
printk(KERN_ERR "hypfs: could not get name table.\n");
}
return rc;
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index a36bea1..9e9972e 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -609,42 +609,12 @@
static struct subsys_attribute on_panic_attr =
__ATTR(on_panic, 0644, on_panic_show, on_panic_store);
-static void print_fcp_block(struct ipl_parameter_block *fcp_block)
-{
- printk(KERN_EMERG "wwpn: %016llx\n",
- (unsigned long long)fcp_block->ipl_info.fcp.wwpn);
- printk(KERN_EMERG "lun: %016llx\n",
- (unsigned long long)fcp_block->ipl_info.fcp.lun);
- printk(KERN_EMERG "bootprog: %lld\n",
- (unsigned long long)fcp_block->ipl_info.fcp.bootprog);
- printk(KERN_EMERG "br_lba: %lld\n",
- (unsigned long long)fcp_block->ipl_info.fcp.br_lba);
- printk(KERN_EMERG "device: %llx\n",
- (unsigned long long)fcp_block->ipl_info.fcp.devno);
- printk(KERN_EMERG "opt: %x\n", fcp_block->ipl_info.fcp.opt);
-}
-
void do_reipl(void)
{
struct ccw_dev_id devid;
static char buf[100];
char loadparm[LOADPARM_LEN + 1];
- switch (reipl_type) {
- case IPL_TYPE_CCW:
- reipl_get_ascii_loadparm(loadparm);
- printk(KERN_EMERG "reboot on ccw device: 0.0.%04x\n",
- reipl_block_ccw->ipl_info.ccw.devno);
- printk(KERN_EMERG "loadparm = '%s'\n", loadparm);
- break;
- case IPL_TYPE_FCP:
- printk(KERN_EMERG "reboot on fcp device:\n");
- print_fcp_block(reipl_block_fcp);
- break;
- default:
- break;
- }
-
switch (reipl_method) {
case IPL_METHOD_CCW_CIO:
devid.devno = reipl_block_ccw->ipl_info.ccw.devno;
@@ -654,6 +624,7 @@
reipl_ccw_dev(&devid);
break;
case IPL_METHOD_CCW_VM:
+ reipl_get_ascii_loadparm(loadparm);
if (strlen(loadparm) == 0)
sprintf(buf, "IPL %X",
reipl_block_ccw->ipl_info.ccw.devno);
@@ -683,7 +654,6 @@
diag308(DIAG308_IPL, NULL);
break;
}
- printk(KERN_EMERG "reboot failed!\n");
signal_processor(smp_processor_id(), sigp_stop_and_store_status);
}
@@ -692,19 +662,6 @@
struct ccw_dev_id devid;
static char buf[100];
- switch (dump_type) {
- case IPL_TYPE_CCW:
- printk(KERN_EMERG "Automatic dump on ccw device: 0.0.%04x\n",
- dump_block_ccw->ipl_info.ccw.devno);
- break;
- case IPL_TYPE_FCP:
- printk(KERN_EMERG "Automatic dump on fcp device:\n");
- print_fcp_block(dump_block_fcp);
- break;
- default:
- return;
- }
-
switch (dump_method) {
case IPL_METHOD_CCW_CIO:
smp_send_stop();
@@ -1037,15 +994,21 @@
}
extern void reset_mcck_handler(void);
+extern void reset_pgm_handler(void);
+extern __u32 dump_prefix_page;
void s390_reset_system(void)
{
struct _lowcore *lc;
- /* Stack for interrupt/machine check handler */
lc = (struct _lowcore *)(unsigned long) store_prefix();
+
+ /* Stack for interrupt/machine check handler */
lc->panic_stack = S390_lowcore.panic_stack;
+ /* Save prefix page address for dump case */
+ dump_prefix_page = (unsigned long) lc;
+
/* Disable prefixing */
set_prefix(0);
@@ -1056,5 +1019,11 @@
S390_lowcore.mcck_new_psw.mask = PSW_KERNEL_BITS & ~PSW_MASK_MCHECK;
S390_lowcore.mcck_new_psw.addr =
PSW_ADDR_AMODE | (unsigned long) &reset_mcck_handler;
+
+ /* Set new program check handler */
+ S390_lowcore.program_new_psw.mask = PSW_KERNEL_BITS & ~PSW_MASK_MCHECK;
+ S390_lowcore.program_new_psw.addr =
+ PSW_ADDR_AMODE | (unsigned long) &reset_pgm_handler;
+
do_reset_calls();
}
diff --git a/arch/s390/kernel/reipl.S b/arch/s390/kernel/reipl.S
index f9434d4..c3f4d9b 100644
--- a/arch/s390/kernel/reipl.S
+++ b/arch/s390/kernel/reipl.S
@@ -16,7 +16,7 @@
stm %r0,%r15,__LC_GPREGS_SAVE_AREA
stctl %c0,%c15,__LC_CREGS_SAVE_AREA
stam %a0,%a15,__LC_AREGS_SAVE_AREA
- stpx __LC_PREFIX_SAVE_AREA
+ mvc __LC_PREFIX_SAVE_AREA(4),dump_prefix_page-.Lpg0(%r13)
stckc .Lclkcmp-.Lpg0(%r13)
mvc __LC_CLOCK_COMP_SAVE_AREA(8),.Lclkcmp-.Lpg0(%r13)
stpt __LC_CPU_TIMER_SAVE_AREA
@@ -79,3 +79,7 @@
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
+ .globl dump_prefix_page
+dump_prefix_page:
+ .long 0x00000000
+
diff --git a/arch/s390/kernel/reipl64.S b/arch/s390/kernel/reipl64.S
index f18ef26..dbb3eed 100644
--- a/arch/s390/kernel/reipl64.S
+++ b/arch/s390/kernel/reipl64.S
@@ -20,7 +20,7 @@
stg %r0,__LC_GPREGS_SAVE_AREA-0x1000+8(%r1)
stctg %c0,%c15,__LC_CREGS_SAVE_AREA-0x1000(%r1)
stam %a0,%a15,__LC_AREGS_SAVE_AREA-0x1000(%r1)
- stpx __LC_PREFIX_SAVE_AREA-0x1000(%r1)
+ mvc __LC_PREFIX_SAVE_AREA-0x1000(4,%r1),dump_prefix_page-.Lpg0(%r13)
stfpc __LC_FP_CREG_SAVE_AREA-0x1000(%r1)
stckc .Lclkcmp-.Lpg0(%r13)
mvc __LC_CLOCK_COMP_SAVE_AREA-0x1000(8,%r1),.Lclkcmp-.Lpg0(%r13)
@@ -103,3 +103,6 @@
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
+ .globl dump_prefix_page
+dump_prefix_page:
+ .long 0x00000000
diff --git a/arch/s390/kernel/reset.S b/arch/s390/kernel/reset.S
index be8688c..8a87355 100644
--- a/arch/s390/kernel/reset.S
+++ b/arch/s390/kernel/reset.S
@@ -3,6 +3,7 @@
*
* Copyright (C) IBM Corp. 2006
* Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ * Michael Holzheu <holzheu@de.ibm.com>
*/
#include <asm/ptrace.h>
@@ -27,6 +28,26 @@
s390_reset_mcck_handler:
.quad 0
+ .globl reset_pgm_handler
+reset_pgm_handler:
+ stmg %r0,%r15,__LC_SAVE_AREA
+ basr %r13,0
+0: lg %r15,__LC_PANIC_STACK # load panic stack
+ aghi %r15,-STACK_FRAME_OVERHEAD
+ lg %r1,s390_reset_pgm_handler-0b(%r13)
+ ltgr %r1,%r1
+ jz 1f
+ basr %r14,%r1
+ lmg %r0,%r15,__LC_SAVE_AREA
+ lpswe __LC_PGM_OLD_PSW
+1: lpswe disabled_wait_psw-0b(%r13)
+ .globl s390_reset_pgm_handler
+s390_reset_pgm_handler:
+ .quad 0
+ .align 8
+disabled_wait_psw:
+ .quad 0x0002000180000000,0x0000000000000000 + reset_pgm_handler
+
#else /* CONFIG_64BIT */
.globl reset_mcck_handler
@@ -45,4 +66,25 @@
s390_reset_mcck_handler:
.long 0
+ .globl reset_pgm_handler
+reset_pgm_handler:
+ stm %r0,%r15,__LC_SAVE_AREA
+ basr %r13,0
+0: l %r15,__LC_PANIC_STACK # load panic stack
+ ahi %r15,-STACK_FRAME_OVERHEAD
+ l %r1,s390_reset_pgm_handler-0b(%r13)
+ ltr %r1,%r1
+ jz 1f
+ basr %r14,%r1
+ lm %r0,%r15,__LC_SAVE_AREA
+ lpsw __LC_PGM_OLD_PSW
+
+1: lpsw disabled_wait_psw-0b(%r13)
+ .globl s390_reset_pgm_handler
+s390_reset_pgm_handler:
+ .long 0
+disabled_wait_psw:
+ .align 8
+ .long 0x000a0000,0x00000000 + reset_pgm_handler
+
#endif /* CONFIG_64BIT */
diff --git a/arch/sparc/defconfig b/arch/sparc/defconfig
index a698562..79e5489 100644
--- a/arch/sparc/defconfig
+++ b/arch/sparc/defconfig
@@ -1,41 +1,59 @@
#
# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20-rc1
+# Sun Dec 17 14:20:47 2006
#
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_HIGHMEM=y
CONFIG_GENERIC_ISA_DMA=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -43,17 +61,36 @@
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
-# General setup
+# Block layer
#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# General machine setup
+#
# CONFIG_SMP is not set
+CONFIG_SPARC=y
CONFIG_SPARC32=y
CONFIG_SBUS=y
CONFIG_SBUSCHAR=y
@@ -61,195 +98,53 @@
CONFIG_SUN_AUXIO=y
CONFIG_SUN_IO=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_SUN_PM=y
# CONFIG_SUN4 is not set
CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
+# CONFIG_PCI_DEBUG is not set
CONFIG_SUN_OPENPROMFS=m
+# CONFIG_SPARC_LED is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=m
CONFIG_SUNOS_EMUL=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Generic Driver Options
-#
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_MDA_CONSOLE is not set
-# CONFIG_PROM_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SUNCORE=y
-CONFIG_SERIAL_SUNZILOG=y
-CONFIG_SERIAL_SUNZILOG_CONSOLE=y
-CONFIG_SERIAL_SUNSU=y
-CONFIG_SERIAL_SUNSU_CONSOLE=y
-# CONFIG_SERIAL_SUNSAB is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-
-#
-# Misc Linux/SPARC drivers
-#
-CONFIG_SUN_OPENPROMIO=m
-CONFIG_SUN_MOSTEK_RTC=m
-# CONFIG_SUN_BPP is not set
-# CONFIG_SUN_VIDEOPIX is not set
-# CONFIG_SUN_AURORA is not set
-# CONFIG_TADPOLE_TS102_UCTRL is not set
-# CONFIG_SUN_JSFLASH is not set
-CONFIG_APM_RTC_IS_GMT=y
-CONFIG_RTC=m
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLOGICPTI=m
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_SCSI_SUNESP=y
-
-#
-# Fibre Channel support
-#
-# CONFIG_FC4 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=m
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
@@ -261,15 +156,40 @@
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
+CONFIG_INET_XFRM_TUNNEL=y
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
@@ -280,6 +200,11 @@
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -289,10 +214,8 @@
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
@@ -303,17 +226,185 @@
# Network testing
#
CONFIG_NET_PKTGEN=m
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLOGICPTI=m
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SCSI_SUNESP=y
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -321,6 +412,11 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -330,6 +426,7 @@
CONFIG_SUNBMAC=m
CONFIG_SUNQE=m
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
@@ -350,14 +447,22 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
@@ -380,17 +485,24 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
-# Unix98 PTY support
+# ISDN subsystem
#
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
@@ -405,17 +517,6 @@
CONFIG_INPUT_EVBUG=m
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=m
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -424,6 +525,7 @@
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
@@ -433,29 +535,239 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SUNCORE=y
+CONFIG_SERIAL_SUNZILOG=y
+CONFIG_SERIAL_SUNZILOG_CONSOLE=y
+CONFIG_SERIAL_SUNSU=y
+CONFIG_SERIAL_SUNSU_CONSOLE=y
+# CONFIG_SERIAL_SUNSAB is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+CONFIG_RTC=m
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_PROM_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Virtualization
+#
+
+#
+# Misc Linux/SPARC drivers
+#
+CONFIG_SUN_OPENPROMIO=m
+CONFIG_SUN_MOSTEK_RTC=m
+# CONFIG_SUN_BPP is not set
+# CONFIG_SUN_VIDEOPIX is not set
+# CONFIG_TADPOLE_TS102_UCTRL is not set
+# CONFIG_SUN_JSFLASH is not set
+
+#
+# Unix98 PTY support
+#
+CONFIG_UNIX98_PTY_COUNT=256
+
+#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_RT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -468,7 +780,8 @@
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
@@ -476,13 +789,12 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-# CONFIG_DEVPTS_FS_SECURITY is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -512,17 +824,23 @@
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_AFS_FS=m
CONFIG_RXRPC=m
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -559,6 +877,7 @@
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
@@ -575,70 +894,104 @@
# CONFIG_NLS_UTF8 is not set
#
-# Sound
+# Distributed Lock Manager
#
-# CONFIG_SOUND is not set
+# CONFIG_DLM is not set
#
-# USB support
+# Instrumentation Support
#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_PROFILING is not set
#
# Kernel hacking
#
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
#
+# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
+# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c
index 33dadd9..d8e008a 100644
--- a/arch/sparc/kernel/sparc_ksyms.c
+++ b/arch/sparc/kernel/sparc_ksyms.c
@@ -83,9 +83,6 @@
/* Private functions with odd calling conventions. */
extern void ___atomic24_add(void);
extern void ___atomic24_sub(void);
-extern void ___set_bit(void);
-extern void ___clear_bit(void);
-extern void ___change_bit(void);
extern void ___rw_read_enter(void);
extern void ___rw_read_try(void);
extern void ___rw_read_exit(void);
@@ -125,11 +122,6 @@
EXPORT_SYMBOL(___atomic24_add);
EXPORT_SYMBOL(___atomic24_sub);
-/* Bit operations. */
-EXPORT_SYMBOL(___set_bit);
-EXPORT_SYMBOL(___clear_bit);
-EXPORT_SYMBOL(___change_bit);
-
/* Per-CPU information table */
EXPORT_PER_CPU_SYMBOL(__cpu_data);
diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c
index 6c7aa51b..2fcce00 100644
--- a/arch/sparc/kernel/time.c
+++ b/arch/sparc/kernel/time.c
@@ -78,7 +78,6 @@
extern char __copy_user_begin[], __copy_user_end[];
extern char __atomic_begin[], __atomic_end[];
extern char __bzero_begin[], __bzero_end[];
- extern char __bitops_begin[], __bitops_end[];
unsigned long pc = regs->pc;
@@ -88,9 +87,7 @@
(pc >= (unsigned long) __atomic_begin &&
pc < (unsigned long) __atomic_end) ||
(pc >= (unsigned long) __bzero_begin &&
- pc < (unsigned long) __bzero_end) ||
- (pc >= (unsigned long) __bitops_begin &&
- pc < (unsigned long) __bitops_end))
+ pc < (unsigned long) __bzero_end))
pc = regs->u_regs[UREG_RETPC];
return pc;
}
diff --git a/arch/sparc/lib/Makefile b/arch/sparc/lib/Makefile
index 5db7e1d..9ddc5b9 100644
--- a/arch/sparc/lib/Makefile
+++ b/arch/sparc/lib/Makefile
@@ -7,7 +7,7 @@
lib-y := mul.o rem.o sdiv.o udiv.o umul.o urem.o ashrdi3.o memcpy.o memset.o \
strlen.o checksum.o blockops.o memscan.o memcmp.o strncmp.o \
strncpy_from_user.o divdi3.o udivdi3.o strlen_user.o \
- copy_user.o locks.o atomic.o atomic32.o bitops.o \
+ copy_user.o locks.o atomic.o \
lshrdi3.o ashldi3.o rwsem.o muldi3.o bitext.o
-obj-y += iomap.o
+obj-y += iomap.o atomic32.o
diff --git a/arch/sparc/lib/atomic32.c b/arch/sparc/lib/atomic32.c
index de84f85..53ddcd9 100644
--- a/arch/sparc/lib/atomic32.c
+++ b/arch/sparc/lib/atomic32.c
@@ -76,3 +76,42 @@
spin_unlock_irqrestore(ATOMIC_HASH(v), flags);
}
EXPORT_SYMBOL(atomic_set);
+
+unsigned long ___set_bit(unsigned long *addr, unsigned long mask)
+{
+ unsigned long old, flags;
+
+ spin_lock_irqsave(ATOMIC_HASH(addr), flags);
+ old = *addr;
+ *addr = old | mask;
+ spin_unlock_irqrestore(ATOMIC_HASH(addr), flags);
+
+ return old & mask;
+}
+EXPORT_SYMBOL(___set_bit);
+
+unsigned long ___clear_bit(unsigned long *addr, unsigned long mask)
+{
+ unsigned long old, flags;
+
+ spin_lock_irqsave(ATOMIC_HASH(addr), flags);
+ old = *addr;
+ *addr = old & ~mask;
+ spin_unlock_irqrestore(ATOMIC_HASH(addr), flags);
+
+ return old & mask;
+}
+EXPORT_SYMBOL(___clear_bit);
+
+unsigned long ___change_bit(unsigned long *addr, unsigned long mask)
+{
+ unsigned long old, flags;
+
+ spin_lock_irqsave(ATOMIC_HASH(addr), flags);
+ old = *addr;
+ *addr = old ^ mask;
+ spin_unlock_irqrestore(ATOMIC_HASH(addr), flags);
+
+ return old & mask;
+}
+EXPORT_SYMBOL(___change_bit);
diff --git a/arch/sparc/lib/bitops.S b/arch/sparc/lib/bitops.S
deleted file mode 100644
index cb7fb66..0000000
--- a/arch/sparc/lib/bitops.S
+++ /dev/null
@@ -1,109 +0,0 @@
-/* bitops.S: Low level assembler bit operations.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <asm/ptrace.h>
-#include <asm/psr.h>
-
- .text
- .align 4
-
- .globl __bitops_begin
-__bitops_begin:
-
- /* Take bits in %g2 and set them in word at %g1,
- * return whether bits were set in original value
- * in %g2. %g4 holds value to restore into %o7
- * in delay slot of jmpl return, %g3 + %g5 + %g7 can be
- * used as temporaries and thus is considered clobbered
- * by all callers.
- */
- .globl ___set_bit
-___set_bit:
- rd %psr, %g3
- nop; nop; nop;
- or %g3, PSR_PIL, %g5
- wr %g5, 0x0, %psr
- nop; nop; nop
-#ifdef CONFIG_SMP
- set bitops_spinlock, %g5
-2: ldstub [%g5], %g7 ! Spin on the byte lock for SMP.
- orcc %g7, 0x0, %g0 ! Did we get it?
- bne 2b ! Nope...
-#endif
- ld [%g1], %g7
- or %g7, %g2, %g5
- and %g7, %g2, %g2
-#ifdef CONFIG_SMP
- st %g5, [%g1]
- set bitops_spinlock, %g5
- stb %g0, [%g5]
-#else
- st %g5, [%g1]
-#endif
- wr %g3, 0x0, %psr
- nop; nop; nop
- jmpl %o7, %g0
- mov %g4, %o7
-
- /* Same as above, but clears the bits from %g2 instead. */
- .globl ___clear_bit
-___clear_bit:
- rd %psr, %g3
- nop; nop; nop
- or %g3, PSR_PIL, %g5
- wr %g5, 0x0, %psr
- nop; nop; nop
-#ifdef CONFIG_SMP
- set bitops_spinlock, %g5
-2: ldstub [%g5], %g7 ! Spin on the byte lock for SMP.
- orcc %g7, 0x0, %g0 ! Did we get it?
- bne 2b ! Nope...
-#endif
- ld [%g1], %g7
- andn %g7, %g2, %g5
- and %g7, %g2, %g2
-#ifdef CONFIG_SMP
- st %g5, [%g1]
- set bitops_spinlock, %g5
- stb %g0, [%g5]
-#else
- st %g5, [%g1]
-#endif
- wr %g3, 0x0, %psr
- nop; nop; nop
- jmpl %o7, %g0
- mov %g4, %o7
-
- /* Same thing again, but this time toggles the bits from %g2. */
- .globl ___change_bit
-___change_bit:
- rd %psr, %g3
- nop; nop; nop
- or %g3, PSR_PIL, %g5
- wr %g5, 0x0, %psr
- nop; nop; nop
-#ifdef CONFIG_SMP
- set bitops_spinlock, %g5
-2: ldstub [%g5], %g7 ! Spin on the byte lock for SMP.
- orcc %g7, 0x0, %g0 ! Did we get it?
- bne 2b ! Nope...
-#endif
- ld [%g1], %g7
- xor %g7, %g2, %g5
- and %g7, %g2, %g2
-#ifdef CONFIG_SMP
- st %g5, [%g1]
- set bitops_spinlock, %g5
- stb %g0, [%g5]
-#else
- st %g5, [%g1]
-#endif
- wr %g3, 0x0, %psr
- nop; nop; nop
- jmpl %o7, %g0
- mov %g4, %o7
-
- .globl __bitops_end
-__bitops_end:
diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S
index 03ffaf89..baea10a 100644
--- a/arch/sparc64/kernel/head.S
+++ b/arch/sparc64/kernel/head.S
@@ -78,11 +78,7 @@
/* PROM cif handler code address is in %o4. */
sparc64_boot:
-1: rd %pc, %g7
- set 1b, %g1
- cmp %g1, %g7
- be,pn %xcc, sparc64_boot_after_remap
- mov %o4, %l7
+ mov %o4, %l7
/* We need to remap the kernel. Use position independant
* code to remap us to KERNBASE.
@@ -295,7 +291,6 @@
add %sp, (192 + 128), %sp
-sparc64_boot_after_remap:
sethi %hi(prom_root_compatible), %g1
or %g1, %lo(prom_root_compatible), %g1
sethi %hi(prom_sun4v_name), %g7
diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
index d64b1ea8..c3d068c 100644
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -372,14 +372,14 @@
}
}
-static struct hw_interrupt_type sun4u_irq = {
+static struct irq_chip sun4u_irq = {
.typename = "sun4u",
.enable = sun4u_irq_enable,
.disable = sun4u_irq_disable,
.end = sun4u_irq_end,
};
-static struct hw_interrupt_type sun4u_irq_ack = {
+static struct irq_chip sun4u_irq_ack = {
.typename = "sun4u+ack",
.enable = sun4u_irq_enable,
.disable = sun4u_irq_disable,
@@ -387,14 +387,14 @@
.end = sun4u_irq_end,
};
-static struct hw_interrupt_type sun4v_irq = {
+static struct irq_chip sun4v_irq = {
.typename = "sun4v",
.enable = sun4v_irq_enable,
.disable = sun4v_irq_disable,
.end = sun4v_irq_end,
};
-static struct hw_interrupt_type sun4v_irq_ack = {
+static struct irq_chip sun4v_irq_ack = {
.typename = "sun4v+ack",
.enable = sun4v_irq_enable,
.disable = sun4v_irq_disable,
@@ -493,22 +493,6 @@
return bucket->virt_irq;
}
-void hw_resend_irq(struct hw_interrupt_type *handler, unsigned int virt_irq)
-{
- struct ino_bucket *bucket = virt_irq_to_bucket(virt_irq);
- unsigned long pstate;
- unsigned int *ent;
-
- __asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate));
- __asm__ __volatile__("wrpr %0, %1, %%pstate"
- : : "r" (pstate), "i" (PSTATE_IE));
- ent = irq_work(smp_processor_id());
- bucket->irq_chain = *ent;
- *ent = __irq(bucket);
- set_softint(1 << PIL_DEVICE_IRQ);
- __asm__ __volatile__("wrpr %0, 0x0, %%pstate" : : "r" (pstate));
-}
-
void ack_bad_irq(unsigned int virt_irq)
{
struct ino_bucket *bucket = virt_irq_to_bucket(virt_irq);
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index cc09d82..0a49585 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -1447,11 +1447,8 @@
char *ptr;
/* Copy section for each CPU (we discard the original) */
- goal = ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES);
-#ifdef CONFIG_MODULES
- if (goal < PERCPU_ENOUGH_ROOM)
- goal = PERCPU_ENOUGH_ROOM;
-#endif
+ goal = PERCPU_ENOUGH_ROOM;
+
__per_cpu_shift = 0;
for (size = 1UL; size < goal; size <<= 1UL)
__per_cpu_shift++;
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index d427553..ef667245 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -480,14 +480,13 @@
config CALGARY_IOMMU_ENABLED_BY_DEFAULT
bool "Should Calgary be enabled by default?"
- default y
depends on CALGARY_IOMMU
help
- Should Calgary be enabled by default? if you choose 'y', Calgary
+ Should Calgary be enabled by default? If you choose 'y', Calgary
will be used (if it exists). If you choose 'n', Calgary will not be
used even if it exists. If you choose 'n' and would like to use
Calgary anyway, pass 'iommu=calgary' on the kernel command line.
- If unsure, say Y.
+ If unsure, say N.
# need this always selected by IOMMU for the VIA workaround
config SWIOTLB
diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile
index b471b855..2941a91 100644
--- a/arch/x86_64/Makefile
+++ b/arch/x86_64/Makefile
@@ -45,9 +45,7 @@
# actually it makes the kernel smaller too.
cflags-y += -fno-reorder-blocks
cflags-y += -Wno-sign-compare
-ifneq ($(CONFIG_UNWIND_INFO),y)
cflags-y += -fno-asynchronous-unwind-tables
-endif
ifneq ($(CONFIG_DEBUG_INFO),y)
# -fweb shrinks the kernel a bit, but the difference is very small
# it also messes up debugging, so don't use it for now.
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index 1a1c6a1..ac80b12 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -1523,8 +1523,6 @@
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
-CONFIG_UNWIND_INFO=y
-CONFIG_STACK_UNWIND=y
# CONFIG_FORCED_INLINING is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S
index 601d332..9f5dac6 100644
--- a/arch/x86_64/kernel/entry.S
+++ b/arch/x86_64/kernel/entry.S
@@ -1155,36 +1155,3 @@
ret
CFI_ENDPROC
ENDPROC(call_softirq)
-
-#ifdef CONFIG_STACK_UNWIND
-ENTRY(arch_unwind_init_running)
- CFI_STARTPROC
- movq %r15, R15(%rdi)
- movq %r14, R14(%rdi)
- xchgq %rsi, %rdx
- movq %r13, R13(%rdi)
- movq %r12, R12(%rdi)
- xorl %eax, %eax
- movq %rbp, RBP(%rdi)
- movq %rbx, RBX(%rdi)
- movq (%rsp), %rcx
- movq %rax, R11(%rdi)
- movq %rax, R10(%rdi)
- movq %rax, R9(%rdi)
- movq %rax, R8(%rdi)
- movq %rax, RAX(%rdi)
- movq %rax, RCX(%rdi)
- movq %rax, RDX(%rdi)
- movq %rax, RSI(%rdi)
- movq %rax, RDI(%rdi)
- movq %rax, ORIG_RAX(%rdi)
- movq %rcx, RIP(%rdi)
- leaq 8(%rsp), %rcx
- movq $__KERNEL_CS, CS(%rdi)
- movq %rax, EFLAGS(%rdi)
- movq %rcx, RSP(%rdi)
- movq $__KERNEL_DS, SS(%rdi)
- jmpq *%rdx
- CFI_ENDPROC
-ENDPROC(arch_unwind_init_running)
-#endif
diff --git a/arch/x86_64/kernel/pci-calgary.c b/arch/x86_64/kernel/pci-calgary.c
index 3215675..87d90cb 100644
--- a/arch/x86_64/kernel/pci-calgary.c
+++ b/arch/x86_64/kernel/pci-calgary.c
@@ -1052,7 +1052,7 @@
void *tbl;
int calgary_found = 0;
unsigned long ptr;
- int offset;
+ unsigned int offset, prev_offset;
int ret;
/*
@@ -1071,15 +1071,20 @@
ptr = (unsigned long)phys_to_virt(get_bios_ebda());
rio_table_hdr = NULL;
+ prev_offset = 0;
offset = 0x180;
- while (offset) {
+ /*
+ * The next offset is stored in the 1st word.
+ * Only parse up until the offset increases:
+ */
+ while (offset > prev_offset) {
/* The block id is stored in the 2nd word */
if (*((unsigned short *)(ptr + offset + 2)) == 0x4752){
/* set the pointer past the offset & block id */
rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
break;
}
- /* The next offset is stored in the 1st word. 0 means no more */
+ prev_offset = offset;
offset = *((unsigned short *)(ptr + offset));
}
if (!rio_table_hdr) {
diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c
index b54ccc0..1d9eb6d 100644
--- a/arch/x86_64/kernel/traps.c
+++ b/arch/x86_64/kernel/traps.c
@@ -110,11 +110,6 @@
}
int kstack_depth_to_print = 12;
-#ifdef CONFIG_STACK_UNWIND
-static int call_trace = 1;
-#else
-#define call_trace (-1)
-#endif
#ifdef CONFIG_KALLSYMS
void printk_address(unsigned long address)
@@ -217,32 +212,6 @@
return NULL;
}
-struct ops_and_data {
- struct stacktrace_ops *ops;
- void *data;
-};
-
-static int dump_trace_unwind(struct unwind_frame_info *info, void *context)
-{
- struct ops_and_data *oad = (struct ops_and_data *)context;
- int n = 0;
- unsigned long sp = UNW_SP(info);
-
- if (arch_unw_user_mode(info))
- return -1;
- while (unwind(info) == 0 && UNW_PC(info)) {
- n++;
- oad->ops->address(oad->data, UNW_PC(info));
- if (arch_unw_user_mode(info))
- break;
- if ((sp & ~(PAGE_SIZE - 1)) == (UNW_SP(info) & ~(PAGE_SIZE - 1))
- && sp > UNW_SP(info))
- break;
- sp = UNW_SP(info);
- }
- return n;
-}
-
#define MSG(txt) ops->warning(data, txt)
/*
@@ -270,40 +239,6 @@
if (!tsk)
tsk = current;
- if (call_trace >= 0) {
- int unw_ret = 0;
- struct unwind_frame_info info;
- struct ops_and_data oad = { .ops = ops, .data = data };
-
- if (regs) {
- if (unwind_init_frame_info(&info, tsk, regs) == 0)
- unw_ret = dump_trace_unwind(&info, &oad);
- } else if (tsk == current)
- unw_ret = unwind_init_running(&info, dump_trace_unwind,
- &oad);
- else {
- if (unwind_init_blocked(&info, tsk) == 0)
- unw_ret = dump_trace_unwind(&info, &oad);
- }
- if (unw_ret > 0) {
- if (call_trace == 1 && !arch_unw_user_mode(&info)) {
- ops->warning_symbol(data,
- "DWARF2 unwinder stuck at %s",
- UNW_PC(&info));
- if ((long)UNW_SP(&info) < 0) {
- MSG("Leftover inexact backtrace:");
- stack = (unsigned long *)UNW_SP(&info);
- if (!stack)
- goto out;
- } else
- MSG("Full inexact backtrace again:");
- } else if (call_trace >= 1)
- goto out;
- else
- MSG("Full inexact backtrace again:");
- } else
- MSG("Inexact backtrace:");
- }
if (!stack) {
unsigned long dummy;
stack = &dummy;
@@ -387,7 +322,6 @@
tinfo = current_thread_info();
HANDLE_STACK (valid_stack_ptr(tinfo, stack));
#undef HANDLE_STACK
-out:
put_cpu();
}
EXPORT_SYMBOL(dump_trace);
@@ -1188,21 +1122,3 @@
return 0;
}
early_param("kstack", kstack_setup);
-
-#ifdef CONFIG_STACK_UNWIND
-static int __init call_trace_setup(char *s)
-{
- if (!s)
- return -EINVAL;
- if (strcmp(s, "old") == 0)
- call_trace = -1;
- else if (strcmp(s, "both") == 0)
- call_trace = 0;
- else if (strcmp(s, "newfallback") == 0)
- call_trace = 1;
- else if (strcmp(s, "new") == 0)
- call_trace = 2;
- return 0;
-}
-early_param("call_trace", call_trace_setup);
-#endif
diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S
index 514be5dd..1e54ddf 100644
--- a/arch/x86_64/kernel/vmlinux.lds.S
+++ b/arch/x86_64/kernel/vmlinux.lds.S
@@ -221,9 +221,7 @@
/* Sections to be discarded */
/DISCARD/ : {
*(.exitcall.exit)
-#ifndef CONFIG_UNWIND_INFO
*(.eh_frame)
-#endif
}
STABS_DEBUG
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 533a293..9fc5eaf 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -568,6 +568,38 @@
cfq_remove_request(next);
}
+static int cfq_allow_merge(request_queue_t *q, struct request *rq,
+ struct bio *bio)
+{
+ struct cfq_data *cfqd = q->elevator->elevator_data;
+ const int rw = bio_data_dir(bio);
+ struct cfq_queue *cfqq;
+ pid_t key;
+
+ /*
+ * If bio is async or a write, always allow merge
+ */
+ if (!bio_sync(bio) || rw == WRITE)
+ return 1;
+
+ /*
+ * bio is sync. if request is not, disallow.
+ */
+ if (!rq_is_sync(rq))
+ return 0;
+
+ /*
+ * Ok, both bio and request are sync. Allow merge if they are
+ * from the same queue.
+ */
+ key = cfq_queue_pid(current, rw, 1);
+ cfqq = cfq_find_cfq_hash(cfqd, key, current->ioprio);
+ if (cfqq != RQ_CFQQ(rq))
+ return 0;
+
+ return 1;
+}
+
static inline void
__cfq_set_active_queue(struct cfq_data *cfqd, struct cfq_queue *cfqq)
{
@@ -2125,6 +2157,7 @@
.elevator_merge_fn = cfq_merge,
.elevator_merged_fn = cfq_merged_request,
.elevator_merge_req_fn = cfq_merged_requests,
+ .elevator_allow_merge_fn = cfq_allow_merge,
.elevator_dispatch_fn = cfq_dispatch_requests,
.elevator_add_req_fn = cfq_insert_request,
.elevator_activate_req_fn = cfq_activate_request,
diff --git a/block/elevator.c b/block/elevator.c
index c0063f3..62c7a30 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -51,6 +51,21 @@
#define ELV_ON_HASH(rq) (!hlist_unhashed(&(rq)->hash))
/*
+ * Query io scheduler to see if the current process issuing bio may be
+ * merged with rq.
+ */
+static int elv_iosched_allow_merge(struct request *rq, struct bio *bio)
+{
+ request_queue_t *q = rq->q;
+ elevator_t *e = q->elevator;
+
+ if (e->ops->elevator_allow_merge_fn)
+ return e->ops->elevator_allow_merge_fn(q, rq, bio);
+
+ return 1;
+}
+
+/*
* can we safely merge with this request?
*/
inline int elv_rq_merge_ok(struct request *rq, struct bio *bio)
@@ -65,12 +80,15 @@
return 0;
/*
- * same device and no special stuff set, merge is ok
+ * must be same device and not a special request
*/
- if (rq->rq_disk == bio->bi_bdev->bd_disk && !rq->special)
- return 1;
+ if (rq->rq_disk != bio->bi_bdev->bd_disk || !rq->special)
+ return 0;
- return 0;
+ if (!elv_iosched_allow_merge(rq, bio))
+ return 0;
+
+ return 1;
}
EXPORT_SYMBOL(elv_rq_merge_ok);
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index 79807db..e07c079 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -1405,8 +1405,7 @@
return 1;
}
-static int ll_back_merge_fn(request_queue_t *q, struct request *req,
- struct bio *bio)
+int ll_back_merge_fn(request_queue_t *q, struct request *req, struct bio *bio)
{
unsigned short max_sectors;
int len;
@@ -1442,6 +1441,7 @@
return ll_new_hw_segment(q, req, bio);
}
+EXPORT_SYMBOL(ll_back_merge_fn);
static int ll_front_merge_fn(request_queue_t *q, struct request *req,
struct bio *bio)
@@ -1912,9 +1912,6 @@
}
q->request_fn = rfn;
- q->back_merge_fn = ll_back_merge_fn;
- q->front_merge_fn = ll_front_merge_fn;
- q->merge_requests_fn = ll_merge_requests_fn;
q->prep_rq_fn = NULL;
q->unplug_fn = generic_unplug_device;
q->queue_flags = (1 << QUEUE_FLAG_CLUSTER);
@@ -2350,40 +2347,29 @@
else
bio = bio_copy_user(q, uaddr, len, reading);
- if (IS_ERR(bio)) {
+ if (IS_ERR(bio))
return PTR_ERR(bio);
- }
orig_bio = bio;
blk_queue_bounce(q, &bio);
+
/*
* We link the bounce buffer in and could have to traverse it
* later so we have to get a ref to prevent it from being freed
*/
bio_get(bio);
- /*
- * for most (all? don't know of any) queues we could
- * skip grabbing the queue lock here. only drivers with
- * funky private ->back_merge_fn() function could be
- * problematic.
- */
- spin_lock_irq(q->queue_lock);
if (!rq->bio)
blk_rq_bio_prep(q, rq, bio);
- else if (!q->back_merge_fn(q, rq, bio)) {
+ else if (!ll_back_merge_fn(q, rq, bio)) {
ret = -EINVAL;
- spin_unlock_irq(q->queue_lock);
goto unmap_bio;
} else {
rq->biotail->bi_next = bio;
rq->biotail = bio;
- rq->nr_sectors += bio_sectors(bio);
- rq->hard_nr_sectors = rq->nr_sectors;
rq->data_len += bio->bi_size;
}
- spin_unlock_irq(q->queue_lock);
return bio->bi_size;
@@ -2419,6 +2405,7 @@
unsigned long len)
{
unsigned long bytes_read = 0;
+ struct bio *bio = NULL;
int ret;
if (len > (q->max_hw_sectors << 9))
@@ -2445,6 +2432,8 @@
ret = __blk_rq_map_user(q, rq, ubuf, map_len);
if (ret < 0)
goto unmap_rq;
+ if (!bio)
+ bio = rq->bio;
bytes_read += ret;
ubuf += ret;
}
@@ -2452,7 +2441,7 @@
rq->buffer = rq->data = NULL;
return 0;
unmap_rq:
- blk_rq_unmap_user(rq);
+ blk_rq_unmap_user(bio);
return ret;
}
@@ -2509,27 +2498,33 @@
/**
* blk_rq_unmap_user - unmap a request with user data
- * @rq: rq to be unmapped
+ * @bio: start of bio list
*
* Description:
- * Unmap a rq previously mapped by blk_rq_map_user().
- * rq->bio must be set to the original head of the request.
+ * Unmap a rq previously mapped by blk_rq_map_user(). The caller must
+ * supply the original rq->bio from the blk_rq_map_user() return, since
+ * the io completion may have changed rq->bio.
*/
-int blk_rq_unmap_user(struct request *rq)
+int blk_rq_unmap_user(struct bio *bio)
{
- struct bio *bio, *mapped_bio;
+ struct bio *mapped_bio;
+ int ret = 0, ret2;
- while ((bio = rq->bio)) {
- if (bio_flagged(bio, BIO_BOUNCED))
+ while (bio) {
+ mapped_bio = bio;
+ if (unlikely(bio_flagged(bio, BIO_BOUNCED)))
mapped_bio = bio->bi_private;
- else
- mapped_bio = bio;
- __blk_rq_unmap_user(mapped_bio);
- rq->bio = bio->bi_next;
- bio_put(bio);
+ ret2 = __blk_rq_unmap_user(mapped_bio);
+ if (ret2 && !ret)
+ ret = ret2;
+
+ mapped_bio = bio;
+ bio = bio->bi_next;
+ bio_put(mapped_bio);
}
- return 0;
+
+ return ret;
}
EXPORT_SYMBOL(blk_rq_unmap_user);
@@ -2822,7 +2817,7 @@
* will have updated segment counts, update sector
* counts here.
*/
- if (!q->merge_requests_fn(q, req, next))
+ if (!ll_merge_requests_fn(q, req, next))
return 0;
/*
@@ -2939,7 +2934,7 @@
case ELEVATOR_BACK_MERGE:
BUG_ON(!rq_mergeable(req));
- if (!q->back_merge_fn(q, req, bio))
+ if (!ll_back_merge_fn(q, req, bio))
break;
blk_add_trace_bio(q, bio, BLK_TA_BACKMERGE);
@@ -2956,7 +2951,7 @@
case ELEVATOR_FRONT_MERGE:
BUG_ON(!rq_mergeable(req));
- if (!q->front_merge_fn(q, req, bio))
+ if (!ll_front_merge_fn(q, req, bio))
break;
blk_add_trace_bio(q, bio, BLK_TA_FRONTMERGE);
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index f322b6a..2528a0c 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -333,8 +333,7 @@
hdr->sb_len_wr = len;
}
- rq->bio = bio;
- if (blk_rq_unmap_user(rq))
+ if (blk_rq_unmap_user(bio))
ret = -EFAULT;
/* may not have succeeded, but output values written to control
diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c
index 003a987..5a84459 100644
--- a/drivers/acpi/ibm_acpi.c
+++ b/drivers/acpi/ibm_acpi.c
@@ -352,7 +352,7 @@
return start;
}
-static int driver_init(void)
+static int ibm_acpi_driver_init(void)
{
printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION);
printk(IBM_INFO "%s\n", IBM_URL);
@@ -1605,7 +1605,7 @@
static struct ibm_struct ibms[] = {
{
.name = "driver",
- .init = driver_init,
+ .init = ibm_acpi_driver_init,
.read = driver_read,
},
{
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 984ab28..b34e0a9 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -40,9 +40,9 @@
tristate "Intel PIIX/ICH SATA support"
depends on PCI
help
- This option enables support for ICH5/6/7/8 Serial ATA.
- If PATA support was enabled previously, this enables
- support for select Intel PIIX/ICH PATA host controllers.
+ This option enables support for ICH5/6/7/8 Serial ATA
+ and support for PATA on the Intel PIIX3/PIIX4/ICH series
+ PATA host controllers.
If unsure, say N.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index f36da48..b517d24 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -402,6 +402,14 @@
{ PCI_VDEVICE(NVIDIA, 0x044d), board_ahci }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x044e), board_ahci }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x044f), board_ahci }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0554), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0555), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0556), board_ahci }, /* MCP67 */
@@ -645,8 +653,6 @@
u32 cap_save, impl_save, tmp;
cap_save = readl(mmio + HOST_CAP);
- cap_save &= ( (1<<28) | (1<<17) );
- cap_save |= (1 << 27);
impl_save = readl(mmio + HOST_PORTS_IMPL);
/* global controller reset */
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index c7de0bb..47701b2 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -226,14 +226,26 @@
{ 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
/* 2801GBM/GHM (ICH7M, identical to ICH6M) */
{ 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
- /* Enterprise Southbridge 2 (where's the datasheet?) */
+ /* Enterprise Southbridge 2 (631xESB/632xESB) */
{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
- /* SATA Controller 1 IDE (ICH8, no datasheet yet) */
+ /* SATA Controller 1 IDE (ICH8) */
{ 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
- /* SATA Controller 2 IDE (ICH8, ditto) */
+ /* SATA Controller 2 IDE (ICH8) */
{ 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
- /* Mobile SATA Controller IDE (ICH8M, ditto) */
+ /* Mobile SATA Controller IDE (ICH8M) */
{ 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* SATA Controller IDE (ICH9) */
+ { 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* SATA Controller IDE (ICH9) */
+ { 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* SATA Controller IDE (ICH9) */
+ { 0x8086, 0x2926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* SATA Controller IDE (ICH9M) */
+ { 0x8086, 0x2928, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* SATA Controller IDE (ICH9M) */
+ { 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* SATA Controller IDE (ICH9M) */
+ { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
{ } /* terminate list */
};
@@ -330,7 +342,7 @@
.port_start = ata_port_start,
.port_stop = ata_port_stop,
- .host_stop = ata_host_stop,
+ .host_stop = piix_host_stop,
};
static const struct ata_port_operations piix_sata_ops = {
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 011c0a8..0d51d13 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1332,7 +1332,7 @@
}
/**
- * ata_exec_internal_sg - execute libata internal command
+ * ata_exec_internal - execute libata internal command
* @dev: Device to which the command is sent
* @tf: Taskfile registers for the command and the result
* @cdb: CDB for packet command
@@ -1353,11 +1353,17 @@
struct ata_taskfile *tf, const u8 *cdb,
int dma_dir, void *buf, unsigned int buflen)
{
- struct scatterlist sg;
+ struct scatterlist *psg = NULL, sg;
+ unsigned int n_elem = 0;
- sg_init_one(&sg, buf, buflen);
+ if (dma_dir != DMA_NONE) {
+ WARN_ON(!buf);
+ sg_init_one(&sg, buf, buflen);
+ psg = &sg;
+ n_elem++;
+ }
- return ata_exec_internal_sg(dev, tf, cdb, dma_dir, &sg, 1);
+ return ata_exec_internal_sg(dev, tf, cdb, dma_dir, psg, n_elem);
}
/**
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 664e137..836947d 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -51,7 +51,7 @@
#define SECTOR_SIZE 512
-typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd);
+typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc);
static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap,
const struct scsi_device *scsidev);
@@ -935,7 +935,6 @@
/**
* ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
* @qc: Storage for translated ATA taskfile
- * @scsicmd: SCSI command to translate
*
* Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY
* (to start). Perhaps these commands should be preceded by
@@ -948,22 +947,25 @@
* RETURNS:
* Zero on success, non-zero on error.
*/
-
-static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc,
- const u8 *scsicmd)
+static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
{
+ struct scsi_cmnd *scmd = qc->scsicmd;
struct ata_taskfile *tf = &qc->tf;
+ const u8 *cdb = scmd->cmnd;
+
+ if (scmd->cmd_len < 5)
+ goto invalid_fld;
tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
tf->protocol = ATA_PROT_NODATA;
- if (scsicmd[1] & 0x1) {
+ if (cdb[1] & 0x1) {
; /* ignore IMMED bit, violates sat-r05 */
}
- if (scsicmd[4] & 0x2)
+ if (cdb[4] & 0x2)
goto invalid_fld; /* LOEJ bit set not supported */
- if (((scsicmd[4] >> 4) & 0xf) != 0)
+ if (((cdb[4] >> 4) & 0xf) != 0)
goto invalid_fld; /* power conditions not supported */
- if (scsicmd[4] & 0x1) {
+ if (cdb[4] & 0x1) {
tf->nsect = 1; /* 1 sector, lba=0 */
if (qc->dev->flags & ATA_DFLAG_LBA) {
@@ -996,7 +998,7 @@
return 0;
invalid_fld:
- ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
/* "Invalid field in cbd" */
return 1;
}
@@ -1005,7 +1007,6 @@
/**
* ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command
* @qc: Storage for translated ATA taskfile
- * @scsicmd: SCSI command to translate (ignored)
*
* Sets up an ATA taskfile to issue FLUSH CACHE or
* FLUSH CACHE EXT.
@@ -1016,8 +1017,7 @@
* RETURNS:
* Zero on success, non-zero on error.
*/
-
-static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
+static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc)
{
struct ata_taskfile *tf = &qc->tf;
@@ -1034,7 +1034,7 @@
/**
* scsi_6_lba_len - Get LBA and transfer length
- * @scsicmd: SCSI command to translate
+ * @cdb: SCSI command to translate
*
* Calculate LBA and transfer length for 6-byte commands.
*
@@ -1042,18 +1042,17 @@
* @plba: the LBA
* @plen: the transfer length
*/
-
-static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+static void scsi_6_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
{
u64 lba = 0;
u32 len = 0;
VPRINTK("six-byte command\n");
- lba |= ((u64)scsicmd[2]) << 8;
- lba |= ((u64)scsicmd[3]);
+ lba |= ((u64)cdb[2]) << 8;
+ lba |= ((u64)cdb[3]);
- len |= ((u32)scsicmd[4]);
+ len |= ((u32)cdb[4]);
*plba = lba;
*plen = len;
@@ -1061,7 +1060,7 @@
/**
* scsi_10_lba_len - Get LBA and transfer length
- * @scsicmd: SCSI command to translate
+ * @cdb: SCSI command to translate
*
* Calculate LBA and transfer length for 10-byte commands.
*
@@ -1069,21 +1068,20 @@
* @plba: the LBA
* @plen: the transfer length
*/
-
-static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+static void scsi_10_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
{
u64 lba = 0;
u32 len = 0;
VPRINTK("ten-byte command\n");
- lba |= ((u64)scsicmd[2]) << 24;
- lba |= ((u64)scsicmd[3]) << 16;
- lba |= ((u64)scsicmd[4]) << 8;
- lba |= ((u64)scsicmd[5]);
+ lba |= ((u64)cdb[2]) << 24;
+ lba |= ((u64)cdb[3]) << 16;
+ lba |= ((u64)cdb[4]) << 8;
+ lba |= ((u64)cdb[5]);
- len |= ((u32)scsicmd[7]) << 8;
- len |= ((u32)scsicmd[8]);
+ len |= ((u32)cdb[7]) << 8;
+ len |= ((u32)cdb[8]);
*plba = lba;
*plen = len;
@@ -1091,7 +1089,7 @@
/**
* scsi_16_lba_len - Get LBA and transfer length
- * @scsicmd: SCSI command to translate
+ * @cdb: SCSI command to translate
*
* Calculate LBA and transfer length for 16-byte commands.
*
@@ -1099,27 +1097,26 @@
* @plba: the LBA
* @plen: the transfer length
*/
-
-static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+static void scsi_16_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
{
u64 lba = 0;
u32 len = 0;
VPRINTK("sixteen-byte command\n");
- lba |= ((u64)scsicmd[2]) << 56;
- lba |= ((u64)scsicmd[3]) << 48;
- lba |= ((u64)scsicmd[4]) << 40;
- lba |= ((u64)scsicmd[5]) << 32;
- lba |= ((u64)scsicmd[6]) << 24;
- lba |= ((u64)scsicmd[7]) << 16;
- lba |= ((u64)scsicmd[8]) << 8;
- lba |= ((u64)scsicmd[9]);
+ lba |= ((u64)cdb[2]) << 56;
+ lba |= ((u64)cdb[3]) << 48;
+ lba |= ((u64)cdb[4]) << 40;
+ lba |= ((u64)cdb[5]) << 32;
+ lba |= ((u64)cdb[6]) << 24;
+ lba |= ((u64)cdb[7]) << 16;
+ lba |= ((u64)cdb[8]) << 8;
+ lba |= ((u64)cdb[9]);
- len |= ((u32)scsicmd[10]) << 24;
- len |= ((u32)scsicmd[11]) << 16;
- len |= ((u32)scsicmd[12]) << 8;
- len |= ((u32)scsicmd[13]);
+ len |= ((u32)cdb[10]) << 24;
+ len |= ((u32)cdb[11]) << 16;
+ len |= ((u32)cdb[12]) << 8;
+ len |= ((u32)cdb[13]);
*plba = lba;
*plen = len;
@@ -1128,7 +1125,6 @@
/**
* ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one
* @qc: Storage for translated ATA taskfile
- * @scsicmd: SCSI command to translate
*
* Converts SCSI VERIFY command to an ATA READ VERIFY command.
*
@@ -1138,23 +1134,28 @@
* RETURNS:
* Zero on success, non-zero on error.
*/
-
-static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
+static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc)
{
+ struct scsi_cmnd *scmd = qc->scsicmd;
struct ata_taskfile *tf = &qc->tf;
struct ata_device *dev = qc->dev;
u64 dev_sectors = qc->dev->n_sectors;
+ const u8 *cdb = scmd->cmnd;
u64 block;
u32 n_block;
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf->protocol = ATA_PROT_NODATA;
- if (scsicmd[0] == VERIFY)
- scsi_10_lba_len(scsicmd, &block, &n_block);
- else if (scsicmd[0] == VERIFY_16)
- scsi_16_lba_len(scsicmd, &block, &n_block);
- else
+ if (cdb[0] == VERIFY) {
+ if (scmd->cmd_len < 10)
+ goto invalid_fld;
+ scsi_10_lba_len(cdb, &block, &n_block);
+ } else if (cdb[0] == VERIFY_16) {
+ if (scmd->cmd_len < 16)
+ goto invalid_fld;
+ scsi_16_lba_len(cdb, &block, &n_block);
+ } else
goto invalid_fld;
if (!n_block)
@@ -1229,24 +1230,23 @@
return 0;
invalid_fld:
- ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
/* "Invalid field in cbd" */
return 1;
out_of_range:
- ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0);
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0);
/* "Logical Block Address out of range" */
return 1;
nothing_to_do:
- qc->scsicmd->result = SAM_STAT_GOOD;
+ scmd->result = SAM_STAT_GOOD;
return 1;
}
/**
* ata_scsi_rw_xlat - Translate SCSI r/w command into an ATA one
* @qc: Storage for translated ATA taskfile
- * @scsicmd: SCSI command to translate
*
* Converts any of six SCSI read/write commands into the
* ATA counterpart, including starting sector (LBA),
@@ -1262,29 +1262,33 @@
* RETURNS:
* Zero on success, non-zero on error.
*/
-
-static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
+static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc)
{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ const u8 *cdb = scmd->cmnd;
unsigned int tf_flags = 0;
u64 block;
u32 n_block;
int rc;
- if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 ||
- scsicmd[0] == WRITE_16)
+ if (cdb[0] == WRITE_10 || cdb[0] == WRITE_6 || cdb[0] == WRITE_16)
tf_flags |= ATA_TFLAG_WRITE;
/* Calculate the SCSI LBA, transfer length and FUA. */
- switch (scsicmd[0]) {
+ switch (cdb[0]) {
case READ_10:
case WRITE_10:
- scsi_10_lba_len(scsicmd, &block, &n_block);
- if (unlikely(scsicmd[1] & (1 << 3)))
+ if (unlikely(scmd->cmd_len < 10))
+ goto invalid_fld;
+ scsi_10_lba_len(cdb, &block, &n_block);
+ if (unlikely(cdb[1] & (1 << 3)))
tf_flags |= ATA_TFLAG_FUA;
break;
case READ_6:
case WRITE_6:
- scsi_6_lba_len(scsicmd, &block, &n_block);
+ if (unlikely(scmd->cmd_len < 6))
+ goto invalid_fld;
+ scsi_6_lba_len(cdb, &block, &n_block);
/* for 6-byte r/w commands, transfer length 0
* means 256 blocks of data, not 0 block.
@@ -1294,8 +1298,10 @@
break;
case READ_16:
case WRITE_16:
- scsi_16_lba_len(scsicmd, &block, &n_block);
- if (unlikely(scsicmd[1] & (1 << 3)))
+ if (unlikely(scmd->cmd_len < 16))
+ goto invalid_fld;
+ scsi_16_lba_len(cdb, &block, &n_block);
+ if (unlikely(cdb[1] & (1 << 3)))
tf_flags |= ATA_TFLAG_FUA;
break;
default:
@@ -1326,17 +1332,17 @@
goto out_of_range;
/* treat all other errors as -EINVAL, fall through */
invalid_fld:
- ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
/* "Invalid field in cbd" */
return 1;
out_of_range:
- ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0);
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0);
/* "Logical Block Address out of range" */
return 1;
nothing_to_do:
- qc->scsicmd->result = SAM_STAT_GOOD;
+ scmd->result = SAM_STAT_GOOD;
return 1;
}
@@ -1456,7 +1462,6 @@
ata_xlat_func_t xlat_func)
{
struct ata_queued_cmd *qc;
- u8 *scsicmd = cmd->cmnd;
int is_io = xlat_func == ata_scsi_rw_xlat;
VPRINTK("ENTER\n");
@@ -1488,7 +1493,7 @@
qc->complete_fn = ata_scsi_qc_complete;
- if (xlat_func(qc, scsicmd))
+ if (xlat_func(qc))
goto early_finish;
/* select device, send command to hardware */
@@ -1539,7 +1544,7 @@
struct scatterlist *sg;
sg = (struct scatterlist *) cmd->request_buffer;
- buf = kmap_atomic(sg->page, KM_USER0) + sg->offset;
+ buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset;
buflen = sg->length;
} else {
buf = cmd->request_buffer;
@@ -1567,7 +1572,7 @@
struct scatterlist *sg;
sg = (struct scatterlist *) cmd->request_buffer;
- kunmap_atomic(buf - sg->offset, KM_USER0);
+ kunmap_atomic(buf - sg->offset, KM_IRQ0);
}
}
@@ -2344,7 +2349,6 @@
/**
* atapi_xlat - Initialize PACKET taskfile
* @qc: command structure to be initialized
- * @scsicmd: SCSI CDB associated with this PACKET command
*
* LOCKING:
* spin_lock_irqsave(host lock)
@@ -2352,25 +2356,25 @@
* RETURNS:
* Zero on success, non-zero on failure.
*/
-
-static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
+static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
{
- struct scsi_cmnd *cmd = qc->scsicmd;
+ struct scsi_cmnd *scmd = qc->scsicmd;
struct ata_device *dev = qc->dev;
int using_pio = (dev->flags & ATA_DFLAG_PIO);
- int nodata = (cmd->sc_data_direction == DMA_NONE);
+ int nodata = (scmd->sc_data_direction == DMA_NONE);
if (!using_pio)
/* Check whether ATAPI DMA is safe */
if (ata_check_atapi_dma(qc))
using_pio = 1;
- memcpy(&qc->cdb, scsicmd, dev->cdb_len);
+ memset(qc->cdb, 0, dev->cdb_len);
+ memcpy(qc->cdb, scmd->cmnd, scmd->cmd_len);
qc->complete_fn = atapi_qc_complete;
qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
- if (cmd->sc_data_direction == DMA_TO_DEVICE) {
+ if (scmd->sc_data_direction == DMA_TO_DEVICE) {
qc->tf.flags |= ATA_TFLAG_WRITE;
DPRINTK("direction: write\n");
}
@@ -2392,12 +2396,12 @@
qc->tf.protocol = ATA_PROT_ATAPI_DMA;
qc->tf.feature |= ATAPI_PKT_DMA;
- if (atapi_dmadir && (cmd->sc_data_direction != DMA_TO_DEVICE))
+ if (atapi_dmadir && (scmd->sc_data_direction != DMA_TO_DEVICE))
/* some SATA bridges need us to indicate data xfer direction */
qc->tf.feature |= ATAPI_DMADIR;
}
- qc->nbytes = cmd->request_bufflen;
+ qc->nbytes = scmd->request_bufflen;
return 0;
}
@@ -2517,28 +2521,27 @@
/**
* ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile
* @qc: command structure to be initialized
- * @scsicmd: SCSI command to convert
*
* Handles either 12 or 16-byte versions of the CDB.
*
* RETURNS:
* Zero on success, non-zero on failure.
*/
-static unsigned int
-ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd)
+static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
{
struct ata_taskfile *tf = &(qc->tf);
- struct scsi_cmnd *cmd = qc->scsicmd;
+ struct scsi_cmnd *scmd = qc->scsicmd;
struct ata_device *dev = qc->dev;
+ const u8 *cdb = scmd->cmnd;
- if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN)
+ if ((tf->protocol = ata_scsi_map_proto(cdb[1])) == ATA_PROT_UNKNOWN)
goto invalid_fld;
/* We may not issue DMA commands if no DMA mode is set */
if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0)
goto invalid_fld;
- if (scsicmd[1] & 0xe0)
+ if (cdb[1] & 0xe0)
/* PIO multi not supported yet */
goto invalid_fld;
@@ -2546,18 +2549,18 @@
* 12 and 16 byte CDBs use different offsets to
* provide the various register values.
*/
- if (scsicmd[0] == ATA_16) {
+ if (cdb[0] == ATA_16) {
/*
* 16-byte CDB - may contain extended commands.
*
* If that is the case, copy the upper byte register values.
*/
- if (scsicmd[1] & 0x01) {
- tf->hob_feature = scsicmd[3];
- tf->hob_nsect = scsicmd[5];
- tf->hob_lbal = scsicmd[7];
- tf->hob_lbam = scsicmd[9];
- tf->hob_lbah = scsicmd[11];
+ if (cdb[1] & 0x01) {
+ tf->hob_feature = cdb[3];
+ tf->hob_nsect = cdb[5];
+ tf->hob_lbal = cdb[7];
+ tf->hob_lbam = cdb[9];
+ tf->hob_lbah = cdb[11];
tf->flags |= ATA_TFLAG_LBA48;
} else
tf->flags &= ~ATA_TFLAG_LBA48;
@@ -2565,26 +2568,26 @@
/*
* Always copy low byte, device and command registers.
*/
- tf->feature = scsicmd[4];
- tf->nsect = scsicmd[6];
- tf->lbal = scsicmd[8];
- tf->lbam = scsicmd[10];
- tf->lbah = scsicmd[12];
- tf->device = scsicmd[13];
- tf->command = scsicmd[14];
+ tf->feature = cdb[4];
+ tf->nsect = cdb[6];
+ tf->lbal = cdb[8];
+ tf->lbam = cdb[10];
+ tf->lbah = cdb[12];
+ tf->device = cdb[13];
+ tf->command = cdb[14];
} else {
/*
* 12-byte CDB - incapable of extended commands.
*/
tf->flags &= ~ATA_TFLAG_LBA48;
- tf->feature = scsicmd[3];
- tf->nsect = scsicmd[4];
- tf->lbal = scsicmd[5];
- tf->lbam = scsicmd[6];
- tf->lbah = scsicmd[7];
- tf->device = scsicmd[8];
- tf->command = scsicmd[9];
+ tf->feature = cdb[3];
+ tf->nsect = cdb[4];
+ tf->lbal = cdb[5];
+ tf->lbam = cdb[6];
+ tf->lbah = cdb[7];
+ tf->device = cdb[8];
+ tf->command = cdb[9];
}
/*
* If slave is possible, enforce correct master/slave bit
@@ -2611,7 +2614,7 @@
*/
tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE);
- if (cmd->sc_data_direction == DMA_TO_DEVICE)
+ if (scmd->sc_data_direction == DMA_TO_DEVICE)
tf->flags |= ATA_TFLAG_WRITE;
/*
@@ -2620,7 +2623,7 @@
* TODO: find out if we need to do more here to
* cover scatter/gather case.
*/
- qc->nsect = cmd->request_bufflen / ATA_SECT_SIZE;
+ qc->nsect = scmd->request_bufflen / ATA_SECT_SIZE;
/* request result TF */
qc->flags |= ATA_QCFLAG_RESULT_TF;
@@ -2628,7 +2631,7 @@
return 0;
invalid_fld:
- ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x00);
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x00);
/* "Invalid field in cdb" */
return 1;
}
@@ -2701,22 +2704,29 @@
#endif
}
-static inline int __ata_scsi_queuecmd(struct scsi_cmnd *cmd,
+static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
void (*done)(struct scsi_cmnd *),
struct ata_device *dev)
{
int rc = 0;
+ if (unlikely(!scmd->cmd_len)) {
+ ata_dev_printk(dev, KERN_WARNING, "WARNING: zero len CDB\n");
+ scmd->result = DID_ERROR << 16;
+ done(scmd);
+ return 0;
+ }
+
if (dev->class == ATA_DEV_ATA) {
ata_xlat_func_t xlat_func = ata_get_xlat_func(dev,
- cmd->cmnd[0]);
+ scmd->cmnd[0]);
if (xlat_func)
- rc = ata_scsi_translate(dev, cmd, done, xlat_func);
+ rc = ata_scsi_translate(dev, scmd, done, xlat_func);
else
- ata_scsi_simulate(dev, cmd, done);
+ ata_scsi_simulate(dev, scmd, done);
} else
- rc = ata_scsi_translate(dev, cmd, done, atapi_xlat);
+ rc = ata_scsi_translate(dev, scmd, done, atapi_xlat);
return rc;
}
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 1c62801..b1ca207 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -372,7 +372,8 @@
static int cs5530_reinit_one(struct pci_dev *pdev)
{
/* If we fail on resume we are doomed */
- BUG_ON(cs5530_init_chip());
+ if (cs5530_init_chip())
+ BUG();
return ata_pci_device_resume(pdev);
}
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index c7d1738..e7bf9d8 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -698,8 +698,10 @@
goto fail_io;
pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0);
- if (pdev == NULL)
+ if (IS_ERR(pdev)) {
+ ret = PTR_ERR(pdev);
goto fail_dev;
+ }
if (ht6560a & mask) {
ops = &ht6560a_port_ops;
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 36f621a..afc0d99 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -247,8 +247,8 @@
*/
pdev = platform_device_register_simple(DRV_NAME, nr_qdi_host, NULL, 0);
- if (pdev == NULL)
- return -ENOMEM;
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
memset(&ae, 0, sizeof(struct ata_probe_ent));
INIT_LIST_HEAD(&ae.node);
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 3677c64..adf4cc1 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -105,8 +105,6 @@
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
- .error_handler = rz1000_error_handler,
-
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index cc09d47..f0d4f7e 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -161,10 +161,15 @@
return -ENOENT;
}
- if ((config->flags & VIA_UDMA) >= VIA_UDMA_66)
+ if ((config->flags & VIA_UDMA) >= VIA_UDMA_100)
ap->cbl = via_cable_detect(ap);
- else
+ /* The UDMA66 series has no cable detect so do drive side detect */
+ else if ((config->flags & VIA_UDMA) < VIA_UDMA_66)
ap->cbl = ATA_CBL_PATA40;
+ else
+ ap->cbl = ATA_CBL_PATA_UNK;
+
+
return ata_std_prereset(ap);
}
@@ -390,7 +395,7 @@
enable &= 3;
if (flags & VIA_SET_FIFO) {
- u8 fifo_setting[4] = {0x00, 0x60, 0x00, 0x20};
+ static const u8 fifo_setting[4] = {0x00, 0x60, 0x00, 0x20};
u8 fifo;
pci_read_config_byte(pdev, 0x43, &fifo);
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 3ea345cd..5d1f518 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -206,8 +206,8 @@
*/
pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0);
- if (pdev == NULL)
- return -ENOMEM;
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
memset(&ae, 0, sizeof(struct ata_probe_ent));
INIT_LIST_HEAD(&ae.node);
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 0d316eb3..f6d498e 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -270,14 +270,6 @@
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC },
- { PCI_VDEVICE(NVIDIA, 0x045c), GENERIC }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045d), GENERIC }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045e), GENERIC }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045f), GENERIC }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x0550), GENERIC }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0551), GENERIC }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0552), GENERIC }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0553), GENERIC }, /* MCP67 */
{ PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC },
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index db32d15..46d8a94 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -56,6 +56,8 @@
#define DRV_VERSION "2.0"
enum {
+ K2_FLAG_NO_ATAPI_DMA = (1 << 29),
+
/* Taskfile registers offsets */
K2_SATA_TF_CMD_OFFSET = 0x00,
K2_SATA_TF_DATA_OFFSET = 0x00,
@@ -83,11 +85,33 @@
/* Port stride */
K2_SATA_PORT_OFFSET = 0x100,
+
+ board_svw4 = 0,
+ board_svw8 = 1,
+};
+
+static const struct k2_board_info {
+ unsigned int n_ports;
+ unsigned long port_flags;
+} k2_board_info[] = {
+ /* board_svw4 */
+ { 4, K2_FLAG_NO_ATAPI_DMA },
+
+ /* board_svw8 */
+ { 8, K2_FLAG_NO_ATAPI_DMA },
};
static u8 k2_stat_check_status(struct ata_port *ap);
+static int k2_sata_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ if (qc->ap->flags & K2_FLAG_NO_ATAPI_DMA)
+ return -1; /* ATAPI DMA not supported */
+
+ return 0;
+}
+
static u32 k2_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
if (sc_reg > SCR_CONTROL)
@@ -111,26 +135,31 @@
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
if (tf->ctl != ap->last_ctl) {
- writeb(tf->ctl, ioaddr->ctl_addr);
+ writeb(tf->ctl, (void __iomem *) ioaddr->ctl_addr);
ap->last_ctl = tf->ctl;
ata_wait_idle(ap);
}
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
- writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr);
- writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr);
- writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr);
- writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr);
- writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr);
+ writew(tf->feature | (((u16)tf->hob_feature) << 8),
+ (void __iomem *) ioaddr->feature_addr);
+ writew(tf->nsect | (((u16)tf->hob_nsect) << 8),
+ (void __iomem *) ioaddr->nsect_addr);
+ writew(tf->lbal | (((u16)tf->hob_lbal) << 8),
+ (void __iomem *) ioaddr->lbal_addr);
+ writew(tf->lbam | (((u16)tf->hob_lbam) << 8),
+ (void __iomem *) ioaddr->lbam_addr);
+ writew(tf->lbah | (((u16)tf->hob_lbah) << 8),
+ (void __iomem *) ioaddr->lbah_addr);
} else if (is_addr) {
- writew(tf->feature, ioaddr->feature_addr);
- writew(tf->nsect, ioaddr->nsect_addr);
- writew(tf->lbal, ioaddr->lbal_addr);
- writew(tf->lbam, ioaddr->lbam_addr);
- writew(tf->lbah, ioaddr->lbah_addr);
+ writew(tf->feature, (void __iomem *) ioaddr->feature_addr);
+ writew(tf->nsect, (void __iomem *) ioaddr->nsect_addr);
+ writew(tf->lbal, (void __iomem *) ioaddr->lbal_addr);
+ writew(tf->lbam, (void __iomem *) ioaddr->lbam_addr);
+ writew(tf->lbah, (void __iomem *) ioaddr->lbah_addr);
}
if (tf->flags & ATA_TFLAG_DEVICE)
- writeb(tf->device, ioaddr->device_addr);
+ writeb(tf->device, (void __iomem *) ioaddr->device_addr);
ata_wait_idle(ap);
}
@@ -142,12 +171,12 @@
u16 nsect, lbal, lbam, lbah, feature;
tf->command = k2_stat_check_status(ap);
- tf->device = readw(ioaddr->device_addr);
- feature = readw(ioaddr->error_addr);
- nsect = readw(ioaddr->nsect_addr);
- lbal = readw(ioaddr->lbal_addr);
- lbam = readw(ioaddr->lbam_addr);
- lbah = readw(ioaddr->lbah_addr);
+ tf->device = readw((void __iomem *)ioaddr->device_addr);
+ feature = readw((void __iomem *)ioaddr->error_addr);
+ nsect = readw((void __iomem *)ioaddr->nsect_addr);
+ lbal = readw((void __iomem *)ioaddr->lbal_addr);
+ lbam = readw((void __iomem *)ioaddr->lbam_addr);
+ lbah = readw((void __iomem *)ioaddr->lbah_addr);
tf->feature = feature;
tf->nsect = nsect;
@@ -313,6 +342,7 @@
.check_status = k2_stat_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
+ .check_atapi_dma = k2_sata_check_atapi_dma,
.bmdma_setup = k2_bmdma_setup_mmio,
.bmdma_start = k2_bmdma_start_mmio,
.bmdma_stop = ata_bmdma_stop,
@@ -359,6 +389,8 @@
struct ata_probe_ent *probe_ent = NULL;
unsigned long base;
void __iomem *mmio_base;
+ const struct k2_board_info *board_info =
+ &k2_board_info[ent->driver_data];
int pci_dev_busy = 0;
int rc;
int i;
@@ -424,7 +456,7 @@
probe_ent->sht = &k2_sata_sht;
probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_MMIO;
+ ATA_FLAG_MMIO | board_info->port_flags;
probe_ent->port_ops = &k2_sata_ops;
probe_ent->n_ports = 4;
probe_ent->irq = pdev->irq;
@@ -441,7 +473,7 @@
/* different controllers have different number of ports - currently 4 or 8 */
/* All ports are on the same function. Multi-function device is no
* longer available. This should not be seen in any system. */
- for (i = 0; i < ent->driver_data; i++)
+ for (i = 0; i < board_info->n_ports; i++)
k2_sata_setup_port(&probe_ent->port[i], base + i * K2_SATA_PORT_OFFSET);
pci_set_master(pdev);
@@ -469,11 +501,11 @@
* controller
* */
static const struct pci_device_id k2_sata_pci_tbl[] = {
- { PCI_VDEVICE(SERVERWORKS, 0x0240), 4 },
- { PCI_VDEVICE(SERVERWORKS, 0x0241), 4 },
- { PCI_VDEVICE(SERVERWORKS, 0x0242), 8 },
- { PCI_VDEVICE(SERVERWORKS, 0x024a), 4 },
- { PCI_VDEVICE(SERVERWORKS, 0x024b), 4 },
+ { PCI_VDEVICE(SERVERWORKS, 0x0240), board_svw4 },
+ { PCI_VDEVICE(SERVERWORKS, 0x0241), board_svw4 },
+ { PCI_VDEVICE(SERVERWORKS, 0x0242), board_svw8 },
+ { PCI_VDEVICE(SERVERWORKS, 0x024a), board_svw4 },
+ { PCI_VDEVICE(SERVERWORKS, 0x024b), board_svw4 },
{ }
};
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index e654b99..0fa1b89 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -149,21 +149,26 @@
vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN);
}
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
- writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr);
- writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr);
- writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr);
- writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr);
- writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr);
+ writew(tf->feature | (((u16)tf->hob_feature) << 8),
+ (void __iomem *) ioaddr->feature_addr);
+ writew(tf->nsect | (((u16)tf->hob_nsect) << 8),
+ (void __iomem *) ioaddr->nsect_addr);
+ writew(tf->lbal | (((u16)tf->hob_lbal) << 8),
+ (void __iomem *) ioaddr->lbal_addr);
+ writew(tf->lbam | (((u16)tf->hob_lbam) << 8),
+ (void __iomem *) ioaddr->lbam_addr);
+ writew(tf->lbah | (((u16)tf->hob_lbah) << 8),
+ (void __iomem *) ioaddr->lbah_addr);
} else if (is_addr) {
- writew(tf->feature, ioaddr->feature_addr);
- writew(tf->nsect, ioaddr->nsect_addr);
- writew(tf->lbal, ioaddr->lbal_addr);
- writew(tf->lbam, ioaddr->lbam_addr);
- writew(tf->lbah, ioaddr->lbah_addr);
+ writew(tf->feature, (void __iomem *) ioaddr->feature_addr);
+ writew(tf->nsect, (void __iomem *) ioaddr->nsect_addr);
+ writew(tf->lbal, (void __iomem *) ioaddr->lbal_addr);
+ writew(tf->lbam, (void __iomem *) ioaddr->lbam_addr);
+ writew(tf->lbah, (void __iomem *) ioaddr->lbah_addr);
}
if (tf->flags & ATA_TFLAG_DEVICE)
- writeb(tf->device, ioaddr->device_addr);
+ writeb(tf->device, (void __iomem *) ioaddr->device_addr);
ata_wait_idle(ap);
}
@@ -175,12 +180,12 @@
u16 nsect, lbal, lbam, lbah, feature;
tf->command = ata_check_status(ap);
- tf->device = readw(ioaddr->device_addr);
- feature = readw(ioaddr->error_addr);
- nsect = readw(ioaddr->nsect_addr);
- lbal = readw(ioaddr->lbal_addr);
- lbam = readw(ioaddr->lbam_addr);
- lbah = readw(ioaddr->lbah_addr);
+ tf->device = readw((void __iomem *) ioaddr->device_addr);
+ feature = readw((void __iomem *) ioaddr->error_addr);
+ nsect = readw((void __iomem *) ioaddr->nsect_addr);
+ lbal = readw((void __iomem *) ioaddr->lbal_addr);
+ lbam = readw((void __iomem *) ioaddr->lbam_addr);
+ lbah = readw((void __iomem *) ioaddr->lbah_addr);
tf->feature = feature;
tf->nsect = nsect;
@@ -327,8 +332,8 @@
port->ctl_addr = base + VSC_SATA_TF_CTL_OFFSET;
port->bmdma_addr = base + VSC_SATA_DMA_CMD_OFFSET;
port->scr_addr = base + VSC_SATA_SCR_STATUS_OFFSET;
- writel(0, base + VSC_SATA_UP_DESCRIPTOR_OFFSET);
- writel(0, base + VSC_SATA_UP_DATA_BUFFER_OFFSET);
+ writel(0, (void __iomem *) base + VSC_SATA_UP_DESCRIPTOR_OFFSET);
+ writel(0, (void __iomem *) base + VSC_SATA_UP_DATA_BUFFER_OFFSET);
}
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index d719a5d..9d2ddb2 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -1907,6 +1907,7 @@
"does not support reading geometry\n");
drv->heads = 255;
drv->sectors = 32; // Sectors per track
+ drv->raid_level = RAID_UNKNOWN;
} else {
drv->heads = inq_buff->data_byte[6];
drv->sectors = inq_buff->data_byte[7];
@@ -2491,7 +2492,7 @@
c->Request.Type.Type = TYPE_CMD; // It is a command.
c->Request.Type.Attribute = ATTR_SIMPLE;
c->Request.Type.Direction =
- (rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
+ (rq_data_dir(creq) == READ) ? XFER_READ : XFER_WRITE;
c->Request.Timeout = 0; // Don't time out
c->Request.CDB[0] =
(rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index e19ba4e..68592c33 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -49,6 +49,7 @@
#include <asm/iseries/hv_lp_event.h>
#include <asm/iseries/hv_lp_config.h>
#include <asm/iseries/vio.h>
+#include <asm/firmware.h>
MODULE_DESCRIPTION("iSeries Virtual DASD");
MODULE_AUTHOR("Dave Boutcher");
@@ -769,6 +770,11 @@
{
int rc;
+ if (!firmware_has_feature(FW_FEATURE_ISERIES)) {
+ rc = -ENODEV;
+ goto early_fail;
+ }
+
/* Try to open to our host lp */
if (viopath_hostLp == HvLpIndexInvalid)
vio_set_hostlp();
diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c
index fdea58a..aeefec9 100644
--- a/drivers/bluetooth/hci_usb.c
+++ b/drivers/bluetooth/hci_usb.c
@@ -126,6 +126,7 @@
/* Kensington Bluetooth USB adapter */
{ USB_DEVICE(0x047d, 0x105d), .driver_info = HCI_RESET },
+ { USB_DEVICE(0x047d, 0x105e), .driver_info = HCI_WRONG_SCO_MTU },
/* ISSC Bluetooth Adapter v3.1 */
{ USB_DEVICE(0x1131, 0x1001), .driver_info = HCI_RESET },
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index e4a2f8f..66d028d 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -2139,8 +2139,7 @@
cdi->last_sense = s->sense_key;
}
- rq->bio = bio;
- if (blk_rq_unmap_user(rq))
+ if (blk_rq_unmap_user(bio))
ret = -EFAULT;
if (ret)
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 54ca931..93fbf84 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -47,6 +47,7 @@
#include <asm/iseries/hv_types.h>
#include <asm/iseries/hv_lp_event.h>
#include <asm/iseries/vio.h>
+#include <asm/firmware.h>
#define VIOCD_DEVICE "iseries/vcd"
@@ -748,6 +749,9 @@
struct proc_dir_entry *e;
int ret = 0;
+ if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ return -ENODEV;
+
if (viopath_hostLp == HvLpIndexInvalid) {
vio_set_hostlp();
/* If we don't have a host, bail out */
diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h
index 0bbb04f..6dcdceb 100644
--- a/drivers/char/drm/drmP.h
+++ b/drivers/char/drm/drmP.h
@@ -561,8 +561,7 @@
int (*context_dtor) (struct drm_device * dev, int context);
int (*kernel_context_switch) (struct drm_device * dev, int old,
int new);
- void (*kernel_context_switch_unlock) (struct drm_device * dev,
- drm_lock_t *lock);
+ void (*kernel_context_switch_unlock) (struct drm_device * dev);
int (*vblank_wait) (struct drm_device * dev, unsigned int *sequence);
int (*vblank_wait2) (struct drm_device * dev, unsigned int *sequence);
int (*dri_library_name) (struct drm_device *dev, char *buf);
@@ -1143,9 +1142,5 @@
extern unsigned long drm_core_get_map_ofs(drm_map_t * map);
extern unsigned long drm_core_get_reg_ofs(struct drm_device *dev);
-#ifndef pci_pretty_name
-#define pci_pretty_name(dev) ""
-#endif
-
#endif /* __KERNEL__ */
#endif
diff --git a/drivers/char/drm/drm_lock.c b/drivers/char/drm/drm_lock.c
index 116ed0f..e9993ba 100644
--- a/drivers/char/drm/drm_lock.c
+++ b/drivers/char/drm/drm_lock.c
@@ -182,7 +182,7 @@
* modules but is required by the Sparc driver.
*/
if (dev->driver->kernel_context_switch_unlock)
- dev->driver->kernel_context_switch_unlock(dev, &lock);
+ dev->driver->kernel_context_switch_unlock(dev);
else {
drm_lock_transfer(dev, &dev->lock.hw_lock->lock,
DRM_KERNEL_CONTEXT);
diff --git a/drivers/char/drm/drm_stub.c b/drivers/char/drm/drm_stub.c
index 5fd6dc0..120d102 100644
--- a/drivers/char/drm/drm_stub.c
+++ b/drivers/char/drm/drm_stub.c
@@ -211,14 +211,16 @@
if (!dev)
return -ENOMEM;
- pci_enable_device(pdev);
+ ret = pci_enable_device(pdev);
+ if (ret)
+ goto err_g1;
if ((ret = drm_fill_in_dev(dev, pdev, ent, driver))) {
printk(KERN_ERR "DRM: Fill_in_dev failed.\n");
- goto err_g1;
+ goto err_g2;
}
if ((ret = drm_get_head(dev, &dev->primary)))
- goto err_g1;
+ goto err_g2;
DRM_INFO("Initialized %s %d.%d.%d %s on minor %d\n",
driver->name, driver->major, driver->minor, driver->patchlevel,
@@ -226,7 +228,9 @@
return 0;
- err_g1:
+err_g2:
+ pci_disable_device(pdev);
+err_g1:
drm_free(dev, sizeof(*dev), DRM_MEM_STUB);
return ret;
}
diff --git a/drivers/char/drm/drm_sysfs.c b/drivers/char/drm/drm_sysfs.c
index ba4b8de..cc8e2eb 100644
--- a/drivers/char/drm/drm_sysfs.c
+++ b/drivers/char/drm/drm_sysfs.c
@@ -45,8 +45,8 @@
int err;
class = class_create(owner, name);
- if (!class) {
- err = -ENOMEM;
+ if (IS_ERR(class)) {
+ err = PTR_ERR(class);
goto err_out;
}
@@ -113,8 +113,8 @@
MKDEV(DRM_MAJOR, head->minor),
&(head->dev->pdev)->dev,
"card%d", head->minor);
- if (!class_dev) {
- err = -ENOMEM;
+ if (IS_ERR(class_dev)) {
+ err = PTR_ERR(class_dev);
goto err_out;
}
diff --git a/drivers/char/drm/i915_irq.c b/drivers/char/drm/i915_irq.c
index e5463b1..e2c4b3a 100644
--- a/drivers/char/drm/i915_irq.c
+++ b/drivers/char/drm/i915_irq.c
@@ -46,88 +46,167 @@
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
- struct list_head *list, *tmp;
+ struct list_head *list, *tmp, hits, *hit;
+ int nhits, nrects, slice[2], upper[2], lower[2], i;
+ unsigned counter[2] = { atomic_read(&dev->vbl_received),
+ atomic_read(&dev->vbl_received2) };
+ drm_drawable_info_t *drw;
+ drm_i915_sarea_t *sarea_priv = dev_priv->sarea_priv;
+ u32 cpp = dev_priv->cpp;
+ u32 cmd = (cpp == 4) ? (XY_SRC_COPY_BLT_CMD |
+ XY_SRC_COPY_BLT_WRITE_ALPHA |
+ XY_SRC_COPY_BLT_WRITE_RGB)
+ : XY_SRC_COPY_BLT_CMD;
+ u32 pitchropcpp = (sarea_priv->pitch * cpp) | (0xcc << 16) |
+ (cpp << 23) | (1 << 24);
+ RING_LOCALS;
DRM_DEBUG("\n");
+ INIT_LIST_HEAD(&hits);
+
+ nhits = nrects = 0;
+
spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
+ /* Find buffer swaps scheduled for this vertical blank */
list_for_each_safe(list, tmp, &dev_priv->vbl_swaps.head) {
drm_i915_vbl_swap_t *vbl_swap =
list_entry(list, drm_i915_vbl_swap_t, head);
- atomic_t *counter = vbl_swap->pipe ? &dev->vbl_received2 :
- &dev->vbl_received;
- if ((atomic_read(counter) - vbl_swap->sequence) <= (1<<23)) {
- drm_drawable_info_t *drw;
+ if ((counter[vbl_swap->pipe] - vbl_swap->sequence) > (1<<23))
+ continue;
- spin_unlock(&dev_priv->swaps_lock);
+ list_del(list);
+ dev_priv->swaps_pending--;
- spin_lock(&dev->drw_lock);
+ spin_unlock(&dev_priv->swaps_lock);
+ spin_lock(&dev->drw_lock);
- drw = drm_get_drawable_info(dev, vbl_swap->drw_id);
-
- if (drw) {
- int i, num_rects = drw->num_rects;
- drm_clip_rect_t *rect = drw->rects;
- drm_i915_sarea_t *sarea_priv =
- dev_priv->sarea_priv;
- u32 cpp = dev_priv->cpp;
- u32 cmd = (cpp == 4) ? (XY_SRC_COPY_BLT_CMD |
- XY_SRC_COPY_BLT_WRITE_ALPHA |
- XY_SRC_COPY_BLT_WRITE_RGB)
- : XY_SRC_COPY_BLT_CMD;
- u32 pitchropcpp = (sarea_priv->pitch * cpp) |
- (0xcc << 16) | (cpp << 23) |
- (1 << 24);
- RING_LOCALS;
+ drw = drm_get_drawable_info(dev, vbl_swap->drw_id);
- i915_kernel_lost_context(dev);
+ if (!drw) {
+ spin_unlock(&dev->drw_lock);
+ drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER);
+ spin_lock(&dev_priv->swaps_lock);
+ continue;
+ }
- BEGIN_LP_RING(6);
+ list_for_each(hit, &hits) {
+ drm_i915_vbl_swap_t *swap_cmp =
+ list_entry(hit, drm_i915_vbl_swap_t, head);
+ drm_drawable_info_t *drw_cmp =
+ drm_get_drawable_info(dev, swap_cmp->drw_id);
- OUT_RING(GFX_OP_DRAWRECT_INFO);
- OUT_RING(0);
- OUT_RING(0);
- OUT_RING(sarea_priv->width |
- sarea_priv->height << 16);
- OUT_RING(sarea_priv->width |
- sarea_priv->height << 16);
- OUT_RING(0);
+ if (drw_cmp &&
+ drw_cmp->rects[0].y1 > drw->rects[0].y1) {
+ list_add_tail(list, hit);
+ break;
+ }
+ }
+
+ spin_unlock(&dev->drw_lock);
+
+ /* List of hits was empty, or we reached the end of it */
+ if (hit == &hits)
+ list_add_tail(list, hits.prev);
+
+ nhits++;
+
+ spin_lock(&dev_priv->swaps_lock);
+ }
+
+ if (nhits == 0) {
+ spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
+ return;
+ }
+
+ spin_unlock(&dev_priv->swaps_lock);
+
+ i915_kernel_lost_context(dev);
+
+ BEGIN_LP_RING(6);
+
+ OUT_RING(GFX_OP_DRAWRECT_INFO);
+ OUT_RING(0);
+ OUT_RING(0);
+ OUT_RING(sarea_priv->width | sarea_priv->height << 16);
+ OUT_RING(sarea_priv->width | sarea_priv->height << 16);
+ OUT_RING(0);
+
+ ADVANCE_LP_RING();
+
+ sarea_priv->ctxOwner = DRM_KERNEL_CONTEXT;
+
+ upper[0] = upper[1] = 0;
+ slice[0] = max(sarea_priv->pipeA_h / nhits, 1);
+ slice[1] = max(sarea_priv->pipeB_h / nhits, 1);
+ lower[0] = sarea_priv->pipeA_y + slice[0];
+ lower[1] = sarea_priv->pipeB_y + slice[0];
+
+ spin_lock(&dev->drw_lock);
+
+ /* Emit blits for buffer swaps, partitioning both outputs into as many
+ * slices as there are buffer swaps scheduled in order to avoid tearing
+ * (based on the assumption that a single buffer swap would always
+ * complete before scanout starts).
+ */
+ for (i = 0; i++ < nhits;
+ upper[0] = lower[0], lower[0] += slice[0],
+ upper[1] = lower[1], lower[1] += slice[1]) {
+ if (i == nhits)
+ lower[0] = lower[1] = sarea_priv->height;
+
+ list_for_each(hit, &hits) {
+ drm_i915_vbl_swap_t *swap_hit =
+ list_entry(hit, drm_i915_vbl_swap_t, head);
+ drm_clip_rect_t *rect;
+ int num_rects, pipe;
+ unsigned short top, bottom;
+
+ drw = drm_get_drawable_info(dev, swap_hit->drw_id);
+
+ if (!drw)
+ continue;
+
+ rect = drw->rects;
+ pipe = swap_hit->pipe;
+ top = upper[pipe];
+ bottom = lower[pipe];
+
+ for (num_rects = drw->num_rects; num_rects--; rect++) {
+ int y1 = max(rect->y1, top);
+ int y2 = min(rect->y2, bottom);
+
+ if (y1 >= y2)
+ continue;
+
+ BEGIN_LP_RING(8);
+
+ OUT_RING(cmd);
+ OUT_RING(pitchropcpp);
+ OUT_RING((y1 << 16) | rect->x1);
+ OUT_RING((y2 << 16) | rect->x2);
+ OUT_RING(sarea_priv->front_offset);
+ OUT_RING((y1 << 16) | rect->x1);
+ OUT_RING(pitchropcpp & 0xffff);
+ OUT_RING(sarea_priv->back_offset);
ADVANCE_LP_RING();
-
- sarea_priv->ctxOwner = DRM_KERNEL_CONTEXT;
-
- for (i = 0; i < num_rects; i++, rect++) {
- BEGIN_LP_RING(8);
-
- OUT_RING(cmd);
- OUT_RING(pitchropcpp);
- OUT_RING((rect->y1 << 16) | rect->x1);
- OUT_RING((rect->y2 << 16) | rect->x2);
- OUT_RING(sarea_priv->front_offset);
- OUT_RING((rect->y1 << 16) | rect->x1);
- OUT_RING(pitchropcpp & 0xffff);
- OUT_RING(sarea_priv->back_offset);
-
- ADVANCE_LP_RING();
- }
}
-
- spin_unlock(&dev->drw_lock);
-
- spin_lock(&dev_priv->swaps_lock);
-
- list_del(list);
-
- drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER);
-
- dev_priv->swaps_pending--;
}
}
- spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
+ spin_unlock_irqrestore(&dev->drw_lock, irqflags);
+
+ list_for_each_safe(hit, tmp, &hits) {
+ drm_i915_vbl_swap_t *swap_hit =
+ list_entry(hit, drm_i915_vbl_swap_t, head);
+
+ list_del(hit);
+
+ drm_free(swap_hit, sizeof(*swap_hit), DRM_MEM_DRIVER);
+ }
}
irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
diff --git a/drivers/char/drm/r128_drm.h b/drivers/char/drm/r128_drm.h
index 5d835b0..6e8af31 100644
--- a/drivers/char/drm/r128_drm.h
+++ b/drivers/char/drm/r128_drm.h
@@ -1,7 +1,8 @@
/* r128_drm.h -- Public header for the r128 driver -*- linux-c -*-
* Created: Wed Apr 5 19:24:19 2000 by kevin@precisioninsight.com
*/
-/* Copyright 2000 Precision Insight, Inc., Cedar Park, Texas.
+/*
+ * Copyright 2000 Precision Insight, Inc., Cedar Park, Texas.
* Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
* All rights reserved.
*
diff --git a/drivers/char/drm/r128_drv.h b/drivers/char/drm/r128_drv.h
index 94abffb..f1efb49 100644
--- a/drivers/char/drm/r128_drv.h
+++ b/drivers/char/drm/r128_drv.h
@@ -1,7 +1,8 @@
/* r128_drv.h -- Private header for r128 driver -*- linux-c -*-
* Created: Mon Dec 13 09:51:11 1999 by faith@precisioninsight.com
*/
-/* Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
+/*
+ * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
* Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
* All rights reserved.
*
diff --git a/drivers/char/drm/r128_state.c b/drivers/char/drm/r128_state.c
index a080cdd..17b11e7 100644
--- a/drivers/char/drm/r128_state.c
+++ b/drivers/char/drm/r128_state.c
@@ -1,7 +1,8 @@
/* r128_state.c -- State support for r128 -*- linux-c -*-
* Created: Thu Jan 27 02:53:43 2000 by gareth@valinux.com
*/
-/* Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+/*
+ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c
index d14477b..032a022 100644
--- a/drivers/char/drm/r300_cmdbuf.c
+++ b/drivers/char/drm/r300_cmdbuf.c
@@ -242,26 +242,6 @@
return 0;
}
-/*
- * we expect offsets passed to the framebuffer to be either within video
- * memory or within AGP space
- */
-static __inline__ int r300_check_offset(drm_radeon_private_t *dev_priv,
- u32 offset)
-{
- /* we realy want to check against end of video aperture
- but this value is not being kept.
- This code is correct for now (does the same thing as the
- code that sets MC_FB_LOCATION) in radeon_cp.c */
- if (offset >= dev_priv->fb_location &&
- offset < (dev_priv->fb_location + dev_priv->fb_size))
- return 0;
- if (offset >= dev_priv->gart_vm_start &&
- offset < (dev_priv->gart_vm_start + dev_priv->gart_size))
- return 0;
- return 1;
-}
-
static __inline__ int r300_emit_carefully_checked_packet0(drm_radeon_private_t *
dev_priv,
drm_radeon_kcmd_buffer_t
@@ -290,7 +270,7 @@
case MARK_SAFE:
break;
case MARK_CHECK_OFFSET:
- if (r300_check_offset(dev_priv, (u32) values[i])) {
+ if (!radeon_check_offset(dev_priv, (u32) values[i])) {
DRM_ERROR
("Offset failed range check (reg=%04x sz=%d)\n",
reg, sz);
@@ -452,7 +432,7 @@
i = 1;
while ((k < narrays) && (i < (count + 1))) {
i++; /* skip attribute field */
- if (r300_check_offset(dev_priv, payload[i])) {
+ if (!radeon_check_offset(dev_priv, payload[i])) {
DRM_ERROR
("Offset failed range check (k=%d i=%d) while processing 3D_LOAD_VBPNTR packet.\n",
k, i);
@@ -463,7 +443,7 @@
if (k == narrays)
break;
/* have one more to process, they come in pairs */
- if (r300_check_offset(dev_priv, payload[i])) {
+ if (!radeon_check_offset(dev_priv, payload[i])) {
DRM_ERROR
("Offset failed range check (k=%d i=%d) while processing 3D_LOAD_VBPNTR packet.\n",
k, i);
@@ -508,7 +488,7 @@
if (cmd[1] & (RADEON_GMC_SRC_PITCH_OFFSET_CNTL
| RADEON_GMC_DST_PITCH_OFFSET_CNTL)) {
offset = cmd[2] << 10;
- ret = r300_check_offset(dev_priv, offset);
+ ret = !radeon_check_offset(dev_priv, offset);
if (ret) {
DRM_ERROR("Invalid bitblt first offset is %08X\n", offset);
return DRM_ERR(EINVAL);
@@ -518,7 +498,7 @@
if ((cmd[1] & RADEON_GMC_SRC_PITCH_OFFSET_CNTL) &&
(cmd[1] & RADEON_GMC_DST_PITCH_OFFSET_CNTL)) {
offset = cmd[3] << 10;
- ret = r300_check_offset(dev_priv, offset);
+ ret = !radeon_check_offset(dev_priv, offset);
if (ret) {
DRM_ERROR("Invalid bitblt second offset is %08X\n", offset);
return DRM_ERR(EINVAL);
@@ -551,7 +531,7 @@
DRM_ERROR("Invalid indx_buffer reg address %08X\n", cmd[1]);
return DRM_ERR(EINVAL);
}
- ret = r300_check_offset(dev_priv, cmd[2]);
+ ret = !radeon_check_offset(dev_priv, cmd[2]);
if (ret) {
DRM_ERROR("Invalid indx_buffer offset is %08X\n", cmd[2]);
return DRM_ERR(EINVAL);
diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h
index f45cd7f..8b105f1 100644
--- a/drivers/char/drm/radeon_drv.h
+++ b/drivers/char/drm/radeon_drv.h
@@ -303,6 +303,21 @@
extern drm_ioctl_desc_t radeon_ioctls[];
extern int radeon_max_ioctl;
+/* Check whether the given hardware address is inside the framebuffer or the
+ * GART area.
+ */
+static __inline__ int radeon_check_offset(drm_radeon_private_t *dev_priv,
+ u64 off)
+{
+ u32 fb_start = dev_priv->fb_location;
+ u32 fb_end = fb_start + dev_priv->fb_size - 1;
+ u32 gart_start = dev_priv->gart_vm_start;
+ u32 gart_end = gart_start + dev_priv->gart_size - 1;
+
+ return ((off >= fb_start && off <= fb_end) ||
+ (off >= gart_start && off <= gart_end));
+}
+
/* radeon_cp.c */
extern int radeon_cp_init(DRM_IOCTL_ARGS);
extern int radeon_cp_start(DRM_IOCTL_ARGS);
diff --git a/drivers/char/drm/radeon_irq.c b/drivers/char/drm/radeon_irq.c
index d60519d..3ff0baa 100644
--- a/drivers/char/drm/radeon_irq.c
+++ b/drivers/char/drm/radeon_irq.c
@@ -1,5 +1,5 @@
-/* radeon_irq.c -- IRQ handling for radeon -*- linux-c -*-
- *
+/* radeon_irq.c -- IRQ handling for radeon -*- linux-c -*- */
+/*
* Copyright (C) The Weather Channel, Inc. 2002. All Rights Reserved.
*
* The Weather Channel (TM) funded Tungsten Graphics to develop the
diff --git a/drivers/char/drm/radeon_mem.c b/drivers/char/drm/radeon_mem.c
index 030a6fa..517cad8 100644
--- a/drivers/char/drm/radeon_mem.c
+++ b/drivers/char/drm/radeon_mem.c
@@ -1,5 +1,5 @@
-/* radeon_mem.c -- Simple GART/fb memory manager for radeon -*- linux-c -*-
- *
+/* radeon_mem.c -- Simple GART/fb memory manager for radeon -*- linux-c -*- */
+/*
* Copyright (C) The Weather Channel, Inc. 2002. All Rights Reserved.
*
* The Weather Channel (TM) funded Tungsten Graphics to develop the
diff --git a/drivers/char/drm/radeon_state.c b/drivers/char/drm/radeon_state.c
index 6e04fdd..938eccb 100644
--- a/drivers/char/drm/radeon_state.c
+++ b/drivers/char/drm/radeon_state.c
@@ -43,10 +43,7 @@
u32 *offset)
{
u64 off = *offset;
- u32 fb_start = dev_priv->fb_location;
- u32 fb_end = fb_start + dev_priv->fb_size - 1;
- u32 gart_start = dev_priv->gart_vm_start;
- u32 gart_end = gart_start + dev_priv->gart_size - 1;
+ u32 fb_end = dev_priv->fb_location + dev_priv->fb_size - 1;
struct drm_radeon_driver_file_fields *radeon_priv;
/* Hrm ... the story of the offset ... So this function converts
@@ -66,8 +63,7 @@
/* First, the best case, the offset already lands in either the
* framebuffer or the GART mapped space
*/
- if ((off >= fb_start && off <= fb_end) ||
- (off >= gart_start && off <= gart_end))
+ if (radeon_check_offset(dev_priv, off))
return 0;
/* Ok, that didn't happen... now check if we have a zero based
@@ -81,11 +77,10 @@
/* Finally, assume we aimed at a GART offset if beyond the fb */
if (off > fb_end)
- off = off - fb_end - 1 + gart_start;
+ off = off - fb_end - 1 + dev_priv->gart_vm_start;
/* Now recheck and fail if out of bounds */
- if ((off >= fb_start && off <= fb_end) ||
- (off >= gart_start && off <= gart_end)) {
+ if (radeon_check_offset(dev_priv, off)) {
DRM_DEBUG("offset fixed up to 0x%x\n", (unsigned int)off);
*offset = off;
return 0;
diff --git a/drivers/char/drm/savage_bci.c b/drivers/char/drm/savage_bci.c
index a9a84f8..b94fab5 100644
--- a/drivers/char/drm/savage_bci.c
+++ b/drivers/char/drm/savage_bci.c
@@ -963,8 +963,8 @@
event.count = savage_bci_emit_event(dev_priv, event.flags);
event.count |= dev_priv->event_wrap << 16;
- DRM_COPY_TO_USER_IOCTL(&((drm_savage_event_emit_t __user *) data)->
- count, event.count, sizeof(event.count));
+ DRM_COPY_TO_USER_IOCTL((drm_savage_event_emit_t __user *) data,
+ event, sizeof(event));
return 0;
}
diff --git a/drivers/char/viocons.c b/drivers/char/viocons.c
index 0e0da44..8de6b95 100644
--- a/drivers/char/viocons.c
+++ b/drivers/char/viocons.c
@@ -42,6 +42,7 @@
#include <linux/tty_flip.h>
#include <linux/sysrq.h>
+#include <asm/firmware.h>
#include <asm/iseries/vio.h>
#include <asm/iseries/hv_lp_event.h>
#include <asm/iseries/hv_call_event.h>
@@ -1060,6 +1061,9 @@
atomic_t wait_flag;
int rc;
+ if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ return -ENODEV;
+
/* +2 for fudge */
rc = viopath_open(HvLpConfig_getPrimaryLpIndex(),
viomajorsubtype_chario, VIOCHAR_WINDOW + 2);
@@ -1145,6 +1149,9 @@
{
int i;
+ if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ return -ENODEV;
+
printk(VIOCONS_KERN_INFO "registering console\n");
for (i = 0; i < VTTY_PORTS; i++) {
port_info[i].lp = HvLpIndexInvalid;
diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c
index 94d79cb..9438512 100644
--- a/drivers/char/viotape.c
+++ b/drivers/char/viotape.c
@@ -49,7 +49,7 @@
#include <asm/uaccess.h>
#include <asm/ioctls.h>
-
+#include <asm/firmware.h>
#include <asm/vio.h>
#include <asm/iseries/vio.h>
#include <asm/iseries/hv_lp_event.h>
@@ -997,6 +997,9 @@
int ret;
struct proc_dir_entry *e;
+ if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ return -ENODEV;
+
op_struct_list = NULL;
if ((ret = add_op_structs(VIOTAPE_MAXREQ)) < 0) {
printk(VIOTAPE_KERN_WARN "couldn't allocate op structs\n");
diff --git a/drivers/connector/cn_queue.c b/drivers/connector/cn_queue.c
index b418b16..296f510 100644
--- a/drivers/connector/cn_queue.c
+++ b/drivers/connector/cn_queue.c
@@ -34,7 +34,7 @@
void cn_queue_wrapper(struct work_struct *work)
{
struct cn_callback_entry *cbq =
- container_of(work, struct cn_callback_entry, work.work);
+ container_of(work, struct cn_callback_entry, work);
struct cn_callback_data *d = &cbq->data;
d->callback(d->callback_priv);
@@ -59,13 +59,12 @@
memcpy(&cbq->id.id, id, sizeof(struct cb_id));
cbq->data.callback = callback;
- INIT_DELAYED_WORK(&cbq->work, &cn_queue_wrapper);
+ INIT_WORK(&cbq->work, &cn_queue_wrapper);
return cbq;
}
static void cn_queue_free_callback(struct cn_callback_entry *cbq)
{
- cancel_delayed_work(&cbq->work);
flush_workqueue(cbq->pdev->cn_queue);
kfree(cbq);
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index 5e7cd45..a44db75 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -135,17 +135,15 @@
spin_lock_bh(&dev->cbdev->queue_lock);
list_for_each_entry(__cbq, &dev->cbdev->queue_list, callback_entry) {
if (cn_cb_equal(&__cbq->id.id, &msg->id)) {
- if (likely(!test_bit(WORK_STRUCT_PENDING,
- &__cbq->work.work.management) &&
+ if (likely(!work_pending(&__cbq->work) &&
__cbq->data.ddata == NULL)) {
__cbq->data.callback_priv = msg;
__cbq->data.ddata = data;
__cbq->data.destruct_data = destruct_data;
- if (queue_delayed_work(
- dev->cbdev->cn_queue,
- &__cbq->work, 0))
+ if (queue_work(dev->cbdev->cn_queue,
+ &__cbq->work))
err = 0;
} else {
struct cn_callback_data *d;
@@ -159,12 +157,11 @@
d->destruct_data = destruct_data;
d->free = __cbq;
- INIT_DELAYED_WORK(&__cbq->work,
- &cn_queue_wrapper);
+ INIT_WORK(&__cbq->work,
+ &cn_queue_wrapper);
- if (queue_delayed_work(
- dev->cbdev->cn_queue,
- &__cbq->work, 0))
+ if (queue_work(dev->cbdev->cn_queue,
+ &__cbq->work))
err = 0;
else {
kfree(__cbq);
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 9fb2edf..d913304 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -959,7 +959,7 @@
/**
- * cpufreq_quick_get - get the CPU frequency (in kHz) frpm policy->cur
+ * cpufreq_quick_get - get the CPU frequency (in kHz) from policy->cur
* @cpu: CPU number
*
* This is the last known freq, without actually getting it from the driver.
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 14cdf09..9986380 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -415,12 +415,31 @@
case 0x000: goto ignore;
case 0x034: map_key_clear(KEY_SLEEP); break;
case 0x036: map_key_clear(BTN_MISC); break;
+ case 0x040: map_key_clear(KEY_MENU); break;
case 0x045: map_key_clear(KEY_RADIO); break;
+
+ case 0x088: map_key_clear(KEY_PC); break;
+ case 0x089: map_key_clear(KEY_TV); break;
case 0x08a: map_key_clear(KEY_WWW); break;
+ case 0x08b: map_key_clear(KEY_DVD); break;
+ case 0x08c: map_key_clear(KEY_PHONE); break;
case 0x08d: map_key_clear(KEY_PROGRAM); break;
+ case 0x08e: map_key_clear(KEY_VIDEOPHONE); break;
+ case 0x08f: map_key_clear(KEY_GAMES); break;
+ case 0x090: map_key_clear(KEY_MEMO); break;
+ case 0x091: map_key_clear(KEY_CD); break;
+ case 0x092: map_key_clear(KEY_VCR); break;
+ case 0x093: map_key_clear(KEY_TUNER); break;
+ case 0x094: map_key_clear(KEY_EXIT); break;
case 0x095: map_key_clear(KEY_HELP); break;
+ case 0x096: map_key_clear(KEY_TAPE); break;
+ case 0x097: map_key_clear(KEY_TV2); break;
+ case 0x098: map_key_clear(KEY_SAT); break;
+
case 0x09c: map_key_clear(KEY_CHANNELUP); break;
case 0x09d: map_key_clear(KEY_CHANNELDOWN); break;
+ case 0x0a0: map_key_clear(KEY_VCR2); break;
+
case 0x0b0: map_key_clear(KEY_PLAY); break;
case 0x0b1: map_key_clear(KEY_PAUSE); break;
case 0x0b2: map_key_clear(KEY_RECORD); break;
@@ -430,6 +449,7 @@
case 0x0b6: map_key_clear(KEY_PREVIOUSSONG); break;
case 0x0b7: map_key_clear(KEY_STOPCD); break;
case 0x0b8: map_key_clear(KEY_EJECTCD); break;
+
case 0x0cd: map_key_clear(KEY_PLAYPAUSE); break;
case 0x0e0: map_abs_clear(ABS_VOLUME); break;
case 0x0e2: map_key_clear(KEY_MUTE); break;
@@ -437,11 +457,30 @@
case 0x0e9: map_key_clear(KEY_VOLUMEUP); break;
case 0x0ea: map_key_clear(KEY_VOLUMEDOWN); break;
case 0x183: map_key_clear(KEY_CONFIG); break;
+ case 0x184: map_key_clear(KEY_WORDPROCESSOR); break;
+ case 0x185: map_key_clear(KEY_EDITOR); break;
+ case 0x186: map_key_clear(KEY_SPREADSHEET); break;
+ case 0x187: map_key_clear(KEY_GRAPHICSEDITOR); break;
+ case 0x188: map_key_clear(KEY_PRESENTATION); break;
+ case 0x189: map_key_clear(KEY_DATABASE); break;
case 0x18a: map_key_clear(KEY_MAIL); break;
+ case 0x18b: map_key_clear(KEY_NEWS); break;
+ case 0x18c: map_key_clear(KEY_VOICEMAIL); break;
+ case 0x18d: map_key_clear(KEY_ADDRESSBOOK); break;
+ case 0x18e: map_key_clear(KEY_CALENDAR); break;
+ case 0x191: map_key_clear(KEY_FINANCE); break;
case 0x192: map_key_clear(KEY_CALC); break;
case 0x194: map_key_clear(KEY_FILE); break;
+ case 0x196: map_key_clear(KEY_WWW); break;
+ case 0x19e: map_key_clear(KEY_COFFEE); break;
+ case 0x1a6: map_key_clear(KEY_HELP); break;
case 0x1a7: map_key_clear(KEY_DOCUMENTS); break;
+ case 0x1bc: map_key_clear(KEY_MESSENGER); break;
+ case 0x1bd: map_key_clear(KEY_INFO); break;
case 0x201: map_key_clear(KEY_NEW); break;
+ case 0x202: map_key_clear(KEY_OPEN); break;
+ case 0x203: map_key_clear(KEY_CLOSE); break;
+ case 0x204: map_key_clear(KEY_EXIT); break;
case 0x207: map_key_clear(KEY_SAVE); break;
case 0x208: map_key_clear(KEY_PRINT); break;
case 0x209: map_key_clear(KEY_PROPS); break;
@@ -456,10 +495,15 @@
case 0x226: map_key_clear(KEY_STOP); break;
case 0x227: map_key_clear(KEY_REFRESH); break;
case 0x22a: map_key_clear(KEY_BOOKMARKS); break;
+ case 0x22d: map_key_clear(KEY_ZOOMIN); break;
+ case 0x22e: map_key_clear(KEY_ZOOMOUT); break;
+ case 0x22f: map_key_clear(KEY_ZOOMRESET); break;
case 0x233: map_key_clear(KEY_SCROLLUP); break;
case 0x234: map_key_clear(KEY_SCROLLDOWN); break;
case 0x238: map_rel(REL_HWHEEL); break;
+ case 0x25f: map_key_clear(KEY_CANCEL); break;
case 0x279: map_key_clear(KEY_REDO); break;
+
case 0x289: map_key_clear(KEY_REPLY); break;
case 0x28b: map_key_clear(KEY_FORWARDMAIL); break;
case 0x28c: map_key_clear(KEY_SEND); break;
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index d55b938..ffdffb6 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -368,7 +368,6 @@
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, PCI_ANY_ID, PCI_ANY_ID, (PCI_CLASS_STORAGE_IDE<<8)|0x8a, 0xffff05, 1},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c
index 0491ec7..44bc6cc7 100644
--- a/drivers/infiniband/hw/mthca/mthca_main.c
+++ b/drivers/infiniband/hw/mthca/mthca_main.c
@@ -80,24 +80,61 @@
module_param(tune_pci, int, 0444);
MODULE_PARM_DESC(tune_pci, "increase PCI burst from the default set by BIOS if nonzero");
-struct mutex mthca_device_mutex;
+DEFINE_MUTEX(mthca_device_mutex);
+
+#define MTHCA_DEFAULT_NUM_QP (1 << 16)
+#define MTHCA_DEFAULT_RDB_PER_QP (1 << 2)
+#define MTHCA_DEFAULT_NUM_CQ (1 << 16)
+#define MTHCA_DEFAULT_NUM_MCG (1 << 13)
+#define MTHCA_DEFAULT_NUM_MPT (1 << 17)
+#define MTHCA_DEFAULT_NUM_MTT (1 << 20)
+#define MTHCA_DEFAULT_NUM_UDAV (1 << 15)
+#define MTHCA_DEFAULT_NUM_RESERVED_MTTS (1 << 18)
+#define MTHCA_DEFAULT_NUM_UARC_SIZE (1 << 18)
+
+static struct mthca_profile hca_profile = {
+ .num_qp = MTHCA_DEFAULT_NUM_QP,
+ .rdb_per_qp = MTHCA_DEFAULT_RDB_PER_QP,
+ .num_cq = MTHCA_DEFAULT_NUM_CQ,
+ .num_mcg = MTHCA_DEFAULT_NUM_MCG,
+ .num_mpt = MTHCA_DEFAULT_NUM_MPT,
+ .num_mtt = MTHCA_DEFAULT_NUM_MTT,
+ .num_udav = MTHCA_DEFAULT_NUM_UDAV, /* Tavor only */
+ .fmr_reserved_mtts = MTHCA_DEFAULT_NUM_RESERVED_MTTS, /* Tavor only */
+ .uarc_size = MTHCA_DEFAULT_NUM_UARC_SIZE, /* Arbel only */
+};
+
+module_param_named(num_qp, hca_profile.num_qp, int, 0444);
+MODULE_PARM_DESC(num_qp, "maximum number of QPs per HCA");
+
+module_param_named(rdb_per_qp, hca_profile.rdb_per_qp, int, 0444);
+MODULE_PARM_DESC(rdb_per_qp, "number of RDB buffers per QP");
+
+module_param_named(num_cq, hca_profile.num_cq, int, 0444);
+MODULE_PARM_DESC(num_cq, "maximum number of CQs per HCA");
+
+module_param_named(num_mcg, hca_profile.num_mcg, int, 0444);
+MODULE_PARM_DESC(num_mcg, "maximum number of multicast groups per HCA");
+
+module_param_named(num_mpt, hca_profile.num_mpt, int, 0444);
+MODULE_PARM_DESC(num_mpt,
+ "maximum number of memory protection table entries per HCA");
+
+module_param_named(num_mtt, hca_profile.num_mtt, int, 0444);
+MODULE_PARM_DESC(num_mtt,
+ "maximum number of memory translation table segments per HCA");
+
+module_param_named(num_udav, hca_profile.num_udav, int, 0444);
+MODULE_PARM_DESC(num_udav, "maximum number of UD address vectors per HCA");
+
+module_param_named(fmr_reserved_mtts, hca_profile.fmr_reserved_mtts, int, 0444);
+MODULE_PARM_DESC(fmr_reserved_mtts,
+ "number of memory translation table segments reserved for FMR");
static const char mthca_version[] __devinitdata =
DRV_NAME ": Mellanox InfiniBand HCA driver v"
DRV_VERSION " (" DRV_RELDATE ")\n";
-static struct mthca_profile default_profile = {
- .num_qp = 1 << 16,
- .rdb_per_qp = 4,
- .num_cq = 1 << 16,
- .num_mcg = 1 << 13,
- .num_mpt = 1 << 17,
- .num_mtt = 1 << 20,
- .num_udav = 1 << 15, /* Tavor only */
- .fmr_reserved_mtts = 1 << 18, /* Tavor only */
- .uarc_size = 1 << 18, /* Arbel only */
-};
-
static int mthca_tune_pci(struct mthca_dev *mdev)
{
int cap;
@@ -303,7 +340,7 @@
goto err_disable;
}
- profile = default_profile;
+ profile = hca_profile;
profile.num_uar = dev_lim.uar_size / PAGE_SIZE;
profile.uarc_size = 0;
if (mdev->mthca_flags & MTHCA_FLAG_SRQ)
@@ -621,7 +658,7 @@
goto err_stop_fw;
}
- profile = default_profile;
+ profile = hca_profile;
profile.num_uar = dev_lim.uar_size / PAGE_SIZE;
profile.num_udav = 0;
if (mdev->mthca_flags & MTHCA_FLAG_SRQ)
@@ -1278,11 +1315,55 @@
.remove = __devexit_p(mthca_remove_one)
};
+static void __init __mthca_check_profile_val(const char *name, int *pval,
+ int pval_default)
+{
+ /* value must be positive and power of 2 */
+ int old_pval = *pval;
+
+ if (old_pval <= 0)
+ *pval = pval_default;
+ else
+ *pval = roundup_pow_of_two(old_pval);
+
+ if (old_pval != *pval) {
+ printk(KERN_WARNING PFX "Invalid value %d for %s in module parameter.\n",
+ old_pval, name);
+ printk(KERN_WARNING PFX "Corrected %s to %d.\n", name, *pval);
+ }
+}
+
+#define mthca_check_profile_val(name, default) \
+ __mthca_check_profile_val(#name, &hca_profile.name, default)
+
+static void __init mthca_validate_profile(void)
+{
+ mthca_check_profile_val(num_qp, MTHCA_DEFAULT_NUM_QP);
+ mthca_check_profile_val(rdb_per_qp, MTHCA_DEFAULT_RDB_PER_QP);
+ mthca_check_profile_val(num_cq, MTHCA_DEFAULT_NUM_CQ);
+ mthca_check_profile_val(num_mcg, MTHCA_DEFAULT_NUM_MCG);
+ mthca_check_profile_val(num_mpt, MTHCA_DEFAULT_NUM_MPT);
+ mthca_check_profile_val(num_mtt, MTHCA_DEFAULT_NUM_MTT);
+ mthca_check_profile_val(num_udav, MTHCA_DEFAULT_NUM_UDAV);
+ mthca_check_profile_val(fmr_reserved_mtts, MTHCA_DEFAULT_NUM_RESERVED_MTTS);
+
+ if (hca_profile.fmr_reserved_mtts >= hca_profile.num_mtt) {
+ printk(KERN_WARNING PFX "Invalid fmr_reserved_mtts module parameter %d.\n",
+ hca_profile.fmr_reserved_mtts);
+ printk(KERN_WARNING PFX "(Must be smaller than num_mtt %d)\n",
+ hca_profile.num_mtt);
+ hca_profile.fmr_reserved_mtts = hca_profile.num_mtt / 2;
+ printk(KERN_WARNING PFX "Corrected fmr_reserved_mtts to %d.\n",
+ hca_profile.fmr_reserved_mtts);
+ }
+}
+
static int __init mthca_init(void)
{
int ret;
- mutex_init(&mthca_device_mutex);
+ mthca_validate_profile();
+
ret = mthca_catas_init();
if (ret)
return ret;
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index e9b6a6f..cdecbf5 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -1898,7 +1898,7 @@
*/
srp_dev->fmr_page_shift = max(9, ffs(dev_attr->page_size_cap) - 1);
srp_dev->fmr_page_size = 1 << srp_dev->fmr_page_shift;
- srp_dev->fmr_page_mask = ~((unsigned long) srp_dev->fmr_page_size - 1);
+ srp_dev->fmr_page_mask = ~((u64) srp_dev->fmr_page_size - 1);
INIT_LIST_HEAD(&srp_dev->dev_list);
diff --git a/drivers/infiniband/ulp/srp/ib_srp.h b/drivers/infiniband/ulp/srp/ib_srp.h
index 868a540..c217723 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.h
+++ b/drivers/infiniband/ulp/srp/ib_srp.h
@@ -87,7 +87,7 @@
struct ib_fmr_pool *fmr_pool;
int fmr_page_shift;
int fmr_page_size;
- unsigned long fmr_page_mask;
+ u64 fmr_page_mask;
};
struct srp_host {
diff --git a/drivers/input/keyboard/amikbd.c b/drivers/input/keyboard/amikbd.c
index 16583d7..c67e84e 100644
--- a/drivers/input/keyboard/amikbd.c
+++ b/drivers/input/keyboard/amikbd.c
@@ -187,7 +187,7 @@
static int __init amikbd_init(void)
{
- int i, j;
+ int i, j, err;
if (!AMIGAHW_PRESENT(AMI_KEYBOARD))
return -ENODEV;
diff --git a/drivers/input/keyboard/sunkbd.c b/drivers/input/keyboard/sunkbd.c
index 3826db9..cc02383 100644
--- a/drivers/input/keyboard/sunkbd.c
+++ b/drivers/input/keyboard/sunkbd.c
@@ -225,7 +225,7 @@
static void sunkbd_enable(struct sunkbd *sunkbd, int enable)
{
serio_pause_rx(sunkbd->serio);
- sunkbd->enabled = 1;
+ sunkbd->enabled = enable;
serio_continue_rx(sunkbd->serio);
}
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 7d824cf..ada5e9b 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -57,8 +57,8 @@
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "1.5.1"
-#define DRV_MODULE_RELDATE "November 15, 2006"
+#define DRV_MODULE_VERSION "1.5.2"
+#define DRV_MODULE_RELDATE "December 13, 2006"
#define RUN_AT(x) (jiffies + (x))
@@ -217,9 +217,16 @@
u32 diff;
smp_mb();
- diff = TX_RING_IDX(bp->tx_prod) - TX_RING_IDX(bp->tx_cons);
- if (diff > MAX_TX_DESC_CNT)
- diff = (diff & MAX_TX_DESC_CNT) - 1;
+
+ /* The ring uses 256 indices for 255 entries, one of them
+ * needs to be skipped.
+ */
+ diff = bp->tx_prod - bp->tx_cons;
+ if (unlikely(diff >= TX_DESC_CNT)) {
+ diff &= 0xffff;
+ if (diff == TX_DESC_CNT)
+ diff = MAX_TX_DESC_CNT;
+ }
return (bp->tx_ring_size - diff);
}
@@ -3089,7 +3096,7 @@
if ((align_start = (offset32 & 3))) {
offset32 &= ~3;
- len32 += align_start;
+ len32 += (4 - align_start);
if ((rc = bnx2_nvram_read(bp, offset32, start, 4)))
return rc;
}
@@ -3107,7 +3114,7 @@
if (align_start || align_end) {
buf = kmalloc(len32, GFP_KERNEL);
- if (buf == 0)
+ if (buf == NULL)
return -ENOMEM;
if (align_start) {
memcpy(buf, start, 4);
@@ -3998,7 +4005,7 @@
if (!skb)
return -ENOMEM;
packet = skb_put(skb, pkt_size);
- memcpy(packet, bp->mac_addr, 6);
+ memcpy(packet, bp->dev->dev_addr, 6);
memset(packet + 6, 0x0, 8);
for (i = 14; i < pkt_size; i++)
packet[i] = (unsigned char) (i & 0xff);
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index d6f4f18..2194b56 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -73,7 +73,7 @@
#include <asm/abs_addr.h>
#include <asm/iseries/mf.h>
#include <asm/uaccess.h>
-
+#include <asm/firmware.h>
#include <asm/iseries/hv_lp_config.h>
#include <asm/iseries/hv_types.h>
#include <asm/iseries/hv_lp_event.h>
@@ -1668,7 +1668,7 @@
* Module initialization/cleanup
*/
-void __exit veth_module_cleanup(void)
+static void __exit veth_module_cleanup(void)
{
int i;
struct veth_lpar_connection *cnx;
@@ -1697,11 +1697,14 @@
}
module_exit(veth_module_cleanup);
-int __init veth_module_init(void)
+static int __init veth_module_init(void)
{
int i;
int rc;
+ if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ return -ENODEV;
+
this_lp = HvLpConfig_getLpIndex_outline();
for (i = 0; i < HVMAXARCHITECTEDLPS; ++i) {
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 571320ae..4056ba1 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -68,8 +68,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.70"
-#define DRV_MODULE_RELDATE "December 1, 2006"
+#define DRV_MODULE_VERSION "3.71"
+#define DRV_MODULE_RELDATE "December 15, 2006"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -959,6 +959,13 @@
u32 phy_status;
int err;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+ u32 val;
+
+ val = tr32(GRC_MISC_CFG);
+ tw32_f(GRC_MISC_CFG, val & ~GRC_MISC_CFG_EPHY_IDDQ);
+ udelay(40);
+ }
err = tg3_readphy(tp, MII_BMSR, &phy_status);
err |= tg3_readphy(tp, MII_BMSR, &phy_status);
if (err != 0)
@@ -1170,7 +1177,15 @@
if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)
return;
- if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906) {
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+ u32 val;
+
+ tg3_bmcr_reset(tp);
+ val = tr32(GRC_MISC_CFG);
+ tw32_f(GRC_MISC_CFG, val | GRC_MISC_CFG_EPHY_IDDQ);
+ udelay(40);
+ return;
+ } else {
tg3_writephy(tp, MII_TG3_EXT_CTRL,
MII_TG3_EXT_CTRL_FORCE_LED_OFF);
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x01b2);
@@ -4426,7 +4441,7 @@
*/
static int tg3_alloc_consistent(struct tg3 *tp)
{
- tp->rx_std_buffers = kmalloc((sizeof(struct ring_info) *
+ tp->rx_std_buffers = kzalloc((sizeof(struct ring_info) *
(TG3_RX_RING_SIZE +
TG3_RX_JUMBO_RING_SIZE)) +
(sizeof(struct tx_ring_info) *
@@ -4435,13 +4450,6 @@
if (!tp->rx_std_buffers)
return -ENOMEM;
- memset(tp->rx_std_buffers, 0,
- (sizeof(struct ring_info) *
- (TG3_RX_RING_SIZE +
- TG3_RX_JUMBO_RING_SIZE)) +
- (sizeof(struct tx_ring_info) *
- TG3_TX_RING_SIZE));
-
tp->rx_jumbo_buffers = &tp->rx_std_buffers[TG3_RX_RING_SIZE];
tp->tx_buffers = (struct tx_ring_info *)
&tp->rx_jumbo_buffers[TG3_RX_JUMBO_RING_SIZE];
@@ -6988,6 +6996,8 @@
struct tg3 *tp = netdev_priv(dev);
int err;
+ netif_carrier_off(tp->dev);
+
tg3_full_lock(tp, 0);
err = tg3_set_power_state(tp, PCI_D0);
@@ -7981,6 +7991,10 @@
tp->link_config.duplex = cmd->duplex;
}
+ tp->link_config.orig_speed = tp->link_config.speed;
+ tp->link_config.orig_duplex = tp->link_config.duplex;
+ tp->link_config.orig_autoneg = tp->link_config.autoneg;
+
if (netif_running(dev))
tg3_setup_phy(tp, 1);
@@ -11923,6 +11937,8 @@
*/
pci_save_state(tp->pdev);
+ pci_set_drvdata(pdev, dev);
+
err = register_netdev(dev);
if (err) {
printk(KERN_ERR PFX "Cannot register net device, "
@@ -11930,8 +11946,6 @@
goto err_out_iounmap;
}
- pci_set_drvdata(pdev, dev);
-
printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x PHY(%s)] (%s) %s Ethernet ",
dev->name,
tp->board_part_number,
@@ -11962,8 +11976,6 @@
(pdev->dma_mask == DMA_32BIT_MASK) ? 32 :
(((u64) pdev->dma_mask == DMA_40BIT_MASK) ? 40 : 64));
- netif_carrier_off(tp->dev);
-
return 0;
err_out_iounmap:
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index dfaf4ed..cf78a7e 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -1350,6 +1350,7 @@
#define GRC_MISC_CFG_BOARD_ID_5788 0x00010000
#define GRC_MISC_CFG_BOARD_ID_5788M 0x00018000
#define GRC_MISC_CFG_BOARD_ID_AC91002A1 0x00018000
+#define GRC_MISC_CFG_EPHY_IDDQ 0x00200000
#define GRC_MISC_CFG_KEEP_GPHY_POWER 0x04000000
#define GRC_LOCAL_CTRL 0x00006808
#define GRC_LCLCTRL_INT_ACTIVE 0x00000001
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 0b9d0db..bd1faeb 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -1682,7 +1682,7 @@
*
* This function frees all data allocated in acpiphp_glue_init()
*/
-void __exit acpiphp_glue_exit(void)
+void acpiphp_glue_exit(void)
{
acpi_pci_unregister_driver(&acpi_pci_hp_driver);
}
diff --git a/drivers/pci/hotplug/rpaphp_slot.c b/drivers/pci/hotplug/rpaphp_slot.c
index b771196..3009193 100644
--- a/drivers/pci/hotplug/rpaphp_slot.c
+++ b/drivers/pci/hotplug/rpaphp_slot.c
@@ -47,21 +47,11 @@
return retval;
}
-static struct hotplug_slot_attribute hotplug_slot_attr_location = {
+static struct hotplug_slot_attribute php_attr_location = {
.attr = {.name = "phy_location", .mode = S_IFREG | S_IRUGO},
.show = location_read_file,
};
-static void rpaphp_sysfs_add_attr_location (struct hotplug_slot *slot)
-{
- sysfs_create_file(&slot->kobj, &hotplug_slot_attr_location.attr);
-}
-
-static void rpaphp_sysfs_remove_attr_location (struct hotplug_slot *slot)
-{
- sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_location.attr);
-}
-
/* free up the memory used by a slot */
static void rpaphp_release_slot(struct hotplug_slot *hotplug_slot)
{
@@ -145,7 +135,7 @@
list_del(&slot->rpaphp_slot_list);
/* remove "phy_location" file */
- rpaphp_sysfs_remove_attr_location(php_slot);
+ sysfs_remove_file(&php_slot->kobj, &php_attr_location.attr);
retval = pci_hp_deregister(php_slot);
if (retval)
@@ -160,36 +150,45 @@
int rpaphp_register_slot(struct slot *slot)
{
+ struct hotplug_slot *php_slot = slot->hotplug_slot;
int retval;
dbg("%s registering slot:path[%s] index[%x], name[%s] pdomain[%x] type[%d]\n",
__FUNCTION__, slot->dn->full_name, slot->index, slot->name,
slot->power_domain, slot->type);
+
/* should not try to register the same slot twice */
- if (is_registered(slot)) { /* should't be here */
+ if (is_registered(slot)) {
err("rpaphp_register_slot: slot[%s] is already registered\n", slot->name);
- rpaphp_release_slot(slot->hotplug_slot);
- return -EAGAIN;
+ retval = -EAGAIN;
+ goto register_fail;
}
- retval = pci_hp_register(slot->hotplug_slot);
+
+ retval = pci_hp_register(php_slot);
if (retval) {
err("pci_hp_register failed with error %d\n", retval);
- rpaphp_release_slot(slot->hotplug_slot);
- return retval;
+ goto register_fail;
}
-
- /* create "phy_locatoin" file */
- rpaphp_sysfs_add_attr_location(slot->hotplug_slot);
+
+ /* create "phy_location" file */
+ retval = sysfs_create_file(&php_slot->kobj, &php_attr_location.attr);
+ if (retval) {
+ err("sysfs_create_file failed with error %d\n", retval);
+ goto sysfs_fail;
+ }
/* add slot to our internal list */
- dbg("%s adding slot[%s] to rpaphp_slot_list\n",
- __FUNCTION__, slot->name);
-
list_add(&slot->rpaphp_slot_list, &rpaphp_slot_head);
info("Slot [%s](PCI location=%s) registered\n", slot->name,
slot->location);
num_slots++;
return 0;
+
+sysfs_fail:
+ pci_hp_deregister(php_slot);
+register_fail:
+ rpaphp_release_slot(php_slot);
+ return retval;
}
int rpaphp_get_power_status(struct slot *slot, u8 * value)
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index 5075769..3ca6a4f 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -47,11 +47,17 @@
extern int shpchp_debug;
extern struct workqueue_struct *shpchp_wq;
-/*#define dbg(format, arg...) do { if (shpchp_debug) printk(KERN_DEBUG "%s: " format, MY_NAME , ## arg); } while (0)*/
-#define dbg(format, arg...) do { if (shpchp_debug) printk("%s: " format, MY_NAME , ## arg); } while (0)
-#define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME , ## arg)
-#define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
-#define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
+#define dbg(format, arg...) \
+ do { \
+ if (shpchp_debug) \
+ printk("%s: " format, MY_NAME , ## arg); \
+ } while (0)
+#define err(format, arg...) \
+ printk(KERN_ERR "%s: " format, MY_NAME , ## arg)
+#define info(format, arg...) \
+ printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
+#define warn(format, arg...) \
+ printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
#define SLOT_NAME_SIZE 10
struct slot {
@@ -83,34 +89,27 @@
struct controller {
struct mutex crit_sect; /* critical section mutex */
struct mutex cmd_lock; /* command lock */
- struct php_ctlr_state_s *hpc_ctlr_handle; /* HPC controller handle */
int num_slots; /* Number of slots on ctlr */
int slot_num_inc; /* 1 or -1 */
struct pci_dev *pci_dev;
struct list_head slot_list;
struct hpc_ops *hpc_ops;
wait_queue_head_t queue; /* sleep & wake process */
- u8 bus;
- u8 device;
- u8 function;
u8 slot_device_offset;
- u8 add_support;
u32 pcix_misc2_reg; /* for amd pogo errata */
- enum pci_bus_speed speed;
u32 first_slot; /* First physical slot number */
- u8 slot_bus; /* Bus where the slots handled by this controller sit */
u32 cap_offset;
unsigned long mmio_base;
unsigned long mmio_size;
+ void __iomem *creg;
+ struct timer_list poll_timer;
};
-
/* Define AMD SHPC ID */
#define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450
#define PCI_DEVICE_ID_AMD_POGO_7458 0x7458
/* AMD PCIX bridge registers */
-
#define PCIX_MEM_BASE_LIMIT_OFFSET 0x1C
#define PCIX_MISCII_OFFSET 0x48
#define PCIX_MISC_BRIDGE_ERRORS_OFFSET 0x80
@@ -145,8 +144,6 @@
#define POWERON_STATE 3
#define POWEROFF_STATE 4
-#define PCI_TO_PCI_BRIDGE_CLASS 0x00060400
-
/* Error messages */
#define INTERLOCK_OPEN 0x00000002
#define ADD_NOT_SUPPORTED 0x00000003
@@ -158,50 +155,32 @@
#define WRONG_BUS_FREQUENCY 0x0000000D
#define POWER_FAILURE 0x0000000E
-#define REMOVE_NOT_SUPPORTED 0x00000003
-
-#define DISABLE_CARD 1
-
-/*
- * error Messages
- */
-#define msg_initialization_err "Initialization failure, error=%d\n"
-#define msg_button_on "PCI slot #%s - powering on due to button press.\n"
-#define msg_button_off "PCI slot #%s - powering off due to button press.\n"
-#define msg_button_cancel "PCI slot #%s - action canceled due to button press.\n"
-
-/* sysfs functions for the hotplug controller info */
extern int __must_check shpchp_create_ctrl_files(struct controller *ctrl);
-
-extern int shpchp_sysfs_enable_slot(struct slot *slot);
-extern int shpchp_sysfs_disable_slot(struct slot *slot);
-
-extern u8 shpchp_handle_attention_button(u8 hp_slot, void *inst_id);
-extern u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id);
-extern u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id);
-extern u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id);
-
-/* pci functions */
-extern int shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num);
-extern int shpchp_configure_device(struct slot *p_slot);
-extern int shpchp_unconfigure_device(struct slot *p_slot);
-extern void shpchp_remove_ctrl_files(struct controller *ctrl);
-extern void cleanup_slots(struct controller *ctrl);
-extern void queue_pushbutton_work(struct work_struct *work);
-
+extern void shpchp_remove_ctrl_files(struct controller *ctrl);
+extern int shpchp_sysfs_enable_slot(struct slot *slot);
+extern int shpchp_sysfs_disable_slot(struct slot *slot);
+extern u8 shpchp_handle_attention_button(u8 hp_slot, struct controller *ctrl);
+extern u8 shpchp_handle_switch_change(u8 hp_slot, struct controller *ctrl);
+extern u8 shpchp_handle_presence_change(u8 hp_slot, struct controller *ctrl);
+extern u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl);
+extern int shpchp_configure_device(struct slot *p_slot);
+extern int shpchp_unconfigure_device(struct slot *p_slot);
+extern void cleanup_slots(struct controller *ctrl);
+extern void queue_pushbutton_work(struct work_struct *work);
+extern int shpc_init( struct controller *ctrl, struct pci_dev *pdev);
#ifdef CONFIG_ACPI
static inline int get_hp_params_from_firmware(struct pci_dev *dev,
- struct hotplug_params *hpp)
+ struct hotplug_params *hpp)
{
if (ACPI_FAILURE(acpi_get_hp_params_from_firmware(dev->bus, hpp)))
return -ENODEV;
return 0;
}
-#define get_hp_hw_control_from_firmware(pdev) \
- do { \
- if (DEVICE_ACPI_HANDLE(&(pdev->dev))) \
- acpi_run_oshp(DEVICE_ACPI_HANDLE(&(pdev->dev))); \
+#define get_hp_hw_control_from_firmware(pdev) \
+ do { \
+ if (DEVICE_ACPI_HANDLE(&(pdev->dev))) \
+ acpi_run_oshp(DEVICE_ACPI_HANDLE(&(pdev->dev)));\
} while (0)
#else
#define get_hp_params_from_firmware(dev, hpp) (-ENODEV)
@@ -222,108 +201,40 @@
volatile u32 serr_loc;
volatile u32 serr_intr_enable;
volatile u32 slot1;
- volatile u32 slot2;
- volatile u32 slot3;
- volatile u32 slot4;
- volatile u32 slot5;
- volatile u32 slot6;
- volatile u32 slot7;
- volatile u32 slot8;
- volatile u32 slot9;
- volatile u32 slot10;
- volatile u32 slot11;
- volatile u32 slot12;
} __attribute__ ((packed));
/* offsets to the controller registers based on the above structure layout */
enum ctrl_offsets {
- BASE_OFFSET = offsetof(struct ctrl_reg, base_offset),
- SLOT_AVAIL1 = offsetof(struct ctrl_reg, slot_avail1),
- SLOT_AVAIL2 = offsetof(struct ctrl_reg, slot_avail2),
- SLOT_CONFIG = offsetof(struct ctrl_reg, slot_config),
- SEC_BUS_CONFIG = offsetof(struct ctrl_reg, sec_bus_config),
- MSI_CTRL = offsetof(struct ctrl_reg, msi_ctrl),
- PROG_INTERFACE = offsetof(struct ctrl_reg, prog_interface),
- CMD = offsetof(struct ctrl_reg, cmd),
- CMD_STATUS = offsetof(struct ctrl_reg, cmd_status),
- INTR_LOC = offsetof(struct ctrl_reg, intr_loc),
- SERR_LOC = offsetof(struct ctrl_reg, serr_loc),
- SERR_INTR_ENABLE = offsetof(struct ctrl_reg, serr_intr_enable),
- SLOT1 = offsetof(struct ctrl_reg, slot1),
- SLOT2 = offsetof(struct ctrl_reg, slot2),
- SLOT3 = offsetof(struct ctrl_reg, slot3),
- SLOT4 = offsetof(struct ctrl_reg, slot4),
- SLOT5 = offsetof(struct ctrl_reg, slot5),
- SLOT6 = offsetof(struct ctrl_reg, slot6),
- SLOT7 = offsetof(struct ctrl_reg, slot7),
- SLOT8 = offsetof(struct ctrl_reg, slot8),
- SLOT9 = offsetof(struct ctrl_reg, slot9),
- SLOT10 = offsetof(struct ctrl_reg, slot10),
- SLOT11 = offsetof(struct ctrl_reg, slot11),
- SLOT12 = offsetof(struct ctrl_reg, slot12),
+ BASE_OFFSET = offsetof(struct ctrl_reg, base_offset),
+ SLOT_AVAIL1 = offsetof(struct ctrl_reg, slot_avail1),
+ SLOT_AVAIL2 = offsetof(struct ctrl_reg, slot_avail2),
+ SLOT_CONFIG = offsetof(struct ctrl_reg, slot_config),
+ SEC_BUS_CONFIG = offsetof(struct ctrl_reg, sec_bus_config),
+ MSI_CTRL = offsetof(struct ctrl_reg, msi_ctrl),
+ PROG_INTERFACE = offsetof(struct ctrl_reg, prog_interface),
+ CMD = offsetof(struct ctrl_reg, cmd),
+ CMD_STATUS = offsetof(struct ctrl_reg, cmd_status),
+ INTR_LOC = offsetof(struct ctrl_reg, intr_loc),
+ SERR_LOC = offsetof(struct ctrl_reg, serr_loc),
+ SERR_INTR_ENABLE = offsetof(struct ctrl_reg, serr_intr_enable),
+ SLOT1 = offsetof(struct ctrl_reg, slot1),
};
-typedef u8(*php_intr_callback_t) (u8 hp_slot, void *instance_id);
-struct php_ctlr_state_s {
- struct php_ctlr_state_s *pnext;
- struct pci_dev *pci_dev;
- unsigned int irq;
- unsigned long flags; /* spinlock's */
- u32 slot_device_offset;
- u32 num_slots;
- struct timer_list int_poll_timer; /* Added for poll event */
- php_intr_callback_t attention_button_callback;
- php_intr_callback_t switch_change_callback;
- php_intr_callback_t presence_change_callback;
- php_intr_callback_t power_fault_callback;
- void *callback_instance_id;
- void __iomem *creg; /* Ptr to controller register space */
-};
-/* Inline functions */
-
-/* Inline functions to check the sanity of a pointer that is passed to us */
-static inline int slot_paranoia_check (struct slot *slot, const char *function)
-{
- if (!slot) {
- dbg("%s - slot == NULL", function);
- return -1;
- }
- if (!slot->hotplug_slot) {
- dbg("%s - slot->hotplug_slot == NULL!", function);
- return -1;
- }
- return 0;
-}
-
-static inline struct slot *get_slot (struct hotplug_slot *hotplug_slot, const char *function)
+static inline struct slot *get_slot(struct hotplug_slot *hotplug_slot)
{
- struct slot *slot;
-
- if (!hotplug_slot) {
- dbg("%s - hotplug_slot == NULL\n", function);
- return NULL;
- }
-
- slot = (struct slot *)hotplug_slot->private;
- if (slot_paranoia_check (slot, function))
- return NULL;
- return slot;
+ return hotplug_slot->private;
}
-static inline struct slot *shpchp_find_slot (struct controller *ctrl, u8 device)
+static inline struct slot *shpchp_find_slot(struct controller *ctrl, u8 device)
{
struct slot *slot;
- if (!ctrl)
- return NULL;
-
list_for_each_entry(slot, &ctrl->slot_list, slot_list) {
if (slot->device == device)
return slot;
}
err("%s: slot (device=0x%x) not found\n", __FUNCTION__, device);
-
return NULL;
}
@@ -400,44 +311,27 @@
pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISCII_OFFSET, pcix_misc2_temp);
}
-enum php_ctlr_type {
- PCI,
- ISA,
- ACPI
-};
-
-int shpc_init( struct controller *ctrl, struct pci_dev *pdev);
-
-int shpc_get_ctlr_slot_config( struct controller *ctrl,
- int *num_ctlr_slots,
- int *first_device_num,
- int *physical_slot_num,
- int *updown,
- int *flags);
-
struct hpc_ops {
- int (*power_on_slot ) (struct slot *slot);
- int (*slot_enable ) (struct slot *slot);
- int (*slot_disable ) (struct slot *slot);
- int (*set_bus_speed_mode) (struct slot *slot, enum pci_bus_speed speed);
- int (*get_power_status) (struct slot *slot, u8 *status);
- int (*get_attention_status) (struct slot *slot, u8 *status);
- int (*set_attention_status) (struct slot *slot, u8 status);
- int (*get_latch_status) (struct slot *slot, u8 *status);
- int (*get_adapter_status) (struct slot *slot, u8 *status);
-
- int (*get_max_bus_speed) (struct slot *slot, enum pci_bus_speed *speed);
- int (*get_cur_bus_speed) (struct slot *slot, enum pci_bus_speed *speed);
- int (*get_adapter_speed) (struct slot *slot, enum pci_bus_speed *speed);
- int (*get_mode1_ECC_cap) (struct slot *slot, u8 *mode);
- int (*get_prog_int) (struct slot *slot, u8 *prog_int);
-
- int (*query_power_fault) (struct slot *slot);
- void (*green_led_on) (struct slot *slot);
- void (*green_led_off) (struct slot *slot);
- void (*green_led_blink) (struct slot *slot);
- void (*release_ctlr) (struct controller *ctrl);
- int (*check_cmd_status) (struct controller *ctrl);
+ int (*power_on_slot)(struct slot *slot);
+ int (*slot_enable)(struct slot *slot);
+ int (*slot_disable)(struct slot *slot);
+ int (*set_bus_speed_mode)(struct slot *slot, enum pci_bus_speed speed);
+ int (*get_power_status)(struct slot *slot, u8 *status);
+ int (*get_attention_status)(struct slot *slot, u8 *status);
+ int (*set_attention_status)(struct slot *slot, u8 status);
+ int (*get_latch_status)(struct slot *slot, u8 *status);
+ int (*get_adapter_status)(struct slot *slot, u8 *status);
+ int (*get_max_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
+ int (*get_cur_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
+ int (*get_adapter_speed)(struct slot *slot, enum pci_bus_speed *speed);
+ int (*get_mode1_ECC_cap)(struct slot *slot, u8 *mode);
+ int (*get_prog_int)(struct slot *slot, u8 *prog_int);
+ int (*query_power_fault)(struct slot *slot);
+ void (*green_led_on)(struct slot *slot);
+ void (*green_led_off)(struct slot *slot);
+ void (*green_led_blink)(struct slot *slot);
+ void (*release_ctlr)(struct controller *ctrl);
+ int (*check_cmd_status)(struct controller *ctrl);
};
#endif /* _SHPCHP_H */
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index 4eac85b..590cd3c 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -104,23 +104,6 @@
slot->bus, slot->number);
}
-
-
-
-static int
-shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun,
- u8 busnum, u8 devnum)
-{
- int offset = devnum - ctrl->slot_device_offset;
-
- dbg("%s: ctrl->slot_num_inc %d, offset %d\n", __FUNCTION__,
- ctrl->slot_num_inc, offset);
- *sun = (u8) (ctrl->first_slot + ctrl->slot_num_inc *offset);
- return 0;
-}
-
-
-
static int init_slots(struct controller *ctrl)
{
struct slot *slot;
@@ -128,7 +111,6 @@
struct hotplug_slot_info *info;
int retval = -ENOMEM;
int i;
- u32 sun;
for (i = 0; i < ctrl->num_slots; i++) {
slot = kzalloc(sizeof(*slot), GFP_KERNEL);
@@ -149,16 +131,11 @@
slot->hp_slot = i;
slot->ctrl = ctrl;
- slot->bus = ctrl->slot_bus;
+ slot->bus = ctrl->pci_dev->subordinate->number;
slot->device = ctrl->slot_device_offset + i;
slot->hpc_ops = ctrl->hpc_ops;
+ slot->number = ctrl->first_slot + (ctrl->slot_num_inc * i);
mutex_init(&slot->lock);
-
- if (shpchprm_get_physical_slot_number(ctrl, &sun,
- slot->bus, slot->device))
- goto error_info;
-
- slot->number = sun;
INIT_DELAYED_WORK(&slot->work, queue_pushbutton_work);
/* register this slot with the hotplug pci core */
@@ -211,42 +188,12 @@
}
}
-static int get_ctlr_slot_config(struct controller *ctrl)
-{
- int num_ctlr_slots;
- int first_device_num;
- int physical_slot_num;
- int updown;
- int rc;
- int flags;
-
- rc = shpc_get_ctlr_slot_config(ctrl, &num_ctlr_slots,
- &first_device_num, &physical_slot_num,
- &updown, &flags);
- if (rc) {
- err("%s: get_ctlr_slot_config fail for b:d (%x:%x)\n",
- __FUNCTION__, ctrl->bus, ctrl->device);
- return -1;
- }
-
- ctrl->num_slots = num_ctlr_slots;
- ctrl->slot_device_offset = first_device_num;
- ctrl->first_slot = physical_slot_num;
- ctrl->slot_num_inc = updown; /* either -1 or 1 */
-
- dbg("%s: num_slot(0x%x) 1st_dev(0x%x) psn(0x%x) updown(%d) for b:d "
- "(%x:%x)\n", __FUNCTION__, num_ctlr_slots, first_device_num,
- physical_slot_num, updown, ctrl->bus, ctrl->device);
-
- return 0;
-}
-
/*
* set_attention_status - Turns the Amber LED for a slot on, off or blink
*/
static int set_attention_status (struct hotplug_slot *hotplug_slot, u8 status)
{
- struct slot *slot = get_slot(hotplug_slot, __FUNCTION__);
+ struct slot *slot = get_slot(hotplug_slot);
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
@@ -258,7 +205,7 @@
static int enable_slot (struct hotplug_slot *hotplug_slot)
{
- struct slot *slot = get_slot(hotplug_slot, __FUNCTION__);
+ struct slot *slot = get_slot(hotplug_slot);
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
@@ -267,7 +214,7 @@
static int disable_slot (struct hotplug_slot *hotplug_slot)
{
- struct slot *slot = get_slot(hotplug_slot, __FUNCTION__);
+ struct slot *slot = get_slot(hotplug_slot);
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
@@ -276,7 +223,7 @@
static int get_power_status (struct hotplug_slot *hotplug_slot, u8 *value)
{
- struct slot *slot = get_slot(hotplug_slot, __FUNCTION__);
+ struct slot *slot = get_slot(hotplug_slot);
int retval;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
@@ -290,7 +237,7 @@
static int get_attention_status (struct hotplug_slot *hotplug_slot, u8 *value)
{
- struct slot *slot = get_slot(hotplug_slot, __FUNCTION__);
+ struct slot *slot = get_slot(hotplug_slot);
int retval;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
@@ -304,7 +251,7 @@
static int get_latch_status (struct hotplug_slot *hotplug_slot, u8 *value)
{
- struct slot *slot = get_slot(hotplug_slot, __FUNCTION__);
+ struct slot *slot = get_slot(hotplug_slot);
int retval;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
@@ -318,7 +265,7 @@
static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value)
{
- struct slot *slot = get_slot(hotplug_slot, __FUNCTION__);
+ struct slot *slot = get_slot(hotplug_slot);
int retval;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
@@ -332,7 +279,7 @@
static int get_address (struct hotplug_slot *hotplug_slot, u32 *value)
{
- struct slot *slot = get_slot(hotplug_slot, __FUNCTION__);
+ struct slot *slot = get_slot(hotplug_slot);
struct pci_bus *bus = slot->ctrl->pci_dev->subordinate;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
@@ -344,7 +291,7 @@
static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
{
- struct slot *slot = get_slot(hotplug_slot, __FUNCTION__);
+ struct slot *slot = get_slot(hotplug_slot);
int retval;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
@@ -358,7 +305,7 @@
static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
{
- struct slot *slot = get_slot(hotplug_slot, __FUNCTION__);
+ struct slot *slot = get_slot(hotplug_slot);
int retval;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
@@ -385,9 +332,6 @@
{
int rc;
struct controller *ctrl;
- struct slot *t_slot;
- int first_device_num; /* first PCI device number */
- int num_ctlr_slots; /* number of slots implemented */
if (!is_shpc_capable(pdev))
return -ENODEV;
@@ -408,47 +352,13 @@
pci_set_drvdata(pdev, ctrl);
- ctrl->bus = pdev->bus->number;
- ctrl->slot_bus = pdev->subordinate->number;
- ctrl->device = PCI_SLOT(pdev->devfn);
- ctrl->function = PCI_FUNC(pdev->devfn);
-
- dbg("ctrl bus=0x%x, device=%x, function=%x, irq=%x\n",
- ctrl->bus, ctrl->device, ctrl->function, pdev->irq);
-
- /*
- * Save configuration headers for this and subordinate PCI buses
- */
- rc = get_ctlr_slot_config(ctrl);
- if (rc) {
- err(msg_initialization_err, rc);
- goto err_out_release_ctlr;
- }
- first_device_num = ctrl->slot_device_offset;
- num_ctlr_slots = ctrl->num_slots;
-
- ctrl->add_support = 1;
-
/* Setup the slot information structures */
rc = init_slots(ctrl);
if (rc) {
- err(msg_initialization_err, 6);
+ err("%s: slot initialization failed\n", SHPC_MODULE_NAME);
goto err_out_release_ctlr;
}
- /* Now hpc_functions (slot->hpc_ops->functions) are ready */
- t_slot = shpchp_find_slot(ctrl, first_device_num);
-
- /* Check for operation bus speed */
- rc = t_slot->hpc_ops->get_cur_bus_speed(t_slot, &ctrl->speed);
- dbg("%s: t_slot->hp_slot %x\n", __FUNCTION__,t_slot->hp_slot);
-
- if (rc || ctrl->speed == PCI_SPEED_UNKNOWN) {
- err(SHPC_MODULE_NAME ": Can't get current bus speed. "
- "Set to 33MHz PCI.\n");
- ctrl->speed = PCI_SPEED_33MHz;
- }
-
rc = shpchp_create_ctrl_files(ctrl);
if (rc)
goto err_cleanup_slots;
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index 158ac78..6bb8473 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -57,9 +57,8 @@
return 0;
}
-u8 shpchp_handle_attention_button(u8 hp_slot, void *inst_id)
+u8 shpchp_handle_attention_button(u8 hp_slot, struct controller *ctrl)
{
- struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u32 event_type;
@@ -81,9 +80,8 @@
}
-u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id)
+u8 shpchp_handle_switch_change(u8 hp_slot, struct controller *ctrl)
{
- struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u8 getstatus;
u32 event_type;
@@ -120,9 +118,8 @@
return 1;
}
-u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id)
+u8 shpchp_handle_presence_change(u8 hp_slot, struct controller *ctrl)
{
- struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u32 event_type;
@@ -154,9 +151,8 @@
return 1;
}
-u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id)
+u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
{
- struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u32 event_type;
@@ -497,10 +493,12 @@
p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (getstatus) {
p_slot->state = BLINKINGOFF_STATE;
- info(msg_button_off, p_slot->name);
+ info("PCI slot #%s - powering off due to button "
+ "press.\n", p_slot->name);
} else {
p_slot->state = BLINKINGON_STATE;
- info(msg_button_on, p_slot->name);
+ info("PCI slot #%s - powering on due to button "
+ "press.\n", p_slot->name);
}
/* blink green LED and turn off amber */
p_slot->hpc_ops->green_led_blink(p_slot);
@@ -523,7 +521,8 @@
else
p_slot->hpc_ops->green_led_off(p_slot);
p_slot->hpc_ops->set_attention_status(p_slot, 0);
- info(msg_button_cancel, p_slot->name);
+ info("PCI slot #%s - action canceled due to button press\n",
+ p_slot->name);
p_slot->state = STATIC_STATE;
break;
case POWEROFF_STATE:
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 83a5226..b7bede4 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -212,44 +212,40 @@
#define SLOT_SERR_INT_MASK 0x3
DEFINE_DBG_BUFFER /* Debug string buffer for entire HPC defined here */
-static struct php_ctlr_state_s *php_ctlr_list_head; /* HPC state linked list */
-static int ctlr_seq_num = 0; /* Controller sequenc # */
-static spinlock_t list_lock;
-
static atomic_t shpchp_num_controllers = ATOMIC_INIT(0);
static irqreturn_t shpc_isr(int irq, void *dev_id);
-static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int sec);
+static void start_int_poll_timer(struct controller *ctrl, int sec);
static int hpc_check_cmd_status(struct controller *ctrl);
static inline u8 shpc_readb(struct controller *ctrl, int reg)
{
- return readb(ctrl->hpc_ctlr_handle->creg + reg);
+ return readb(ctrl->creg + reg);
}
static inline void shpc_writeb(struct controller *ctrl, int reg, u8 val)
{
- writeb(val, ctrl->hpc_ctlr_handle->creg + reg);
+ writeb(val, ctrl->creg + reg);
}
static inline u16 shpc_readw(struct controller *ctrl, int reg)
{
- return readw(ctrl->hpc_ctlr_handle->creg + reg);
+ return readw(ctrl->creg + reg);
}
static inline void shpc_writew(struct controller *ctrl, int reg, u16 val)
{
- writew(val, ctrl->hpc_ctlr_handle->creg + reg);
+ writew(val, ctrl->creg + reg);
}
static inline u32 shpc_readl(struct controller *ctrl, int reg)
{
- return readl(ctrl->hpc_ctlr_handle->creg + reg);
+ return readl(ctrl->creg + reg);
}
static inline void shpc_writel(struct controller *ctrl, int reg, u32 val)
{
- writel(val, ctrl->hpc_ctlr_handle->creg + reg);
+ writel(val, ctrl->creg + reg);
}
static inline int shpc_indirect_read(struct controller *ctrl, int index,
@@ -268,21 +264,20 @@
/*
* This is the interrupt polling timeout function.
*/
-static void int_poll_timeout(unsigned long lphp_ctlr)
+static void int_poll_timeout(unsigned long data)
{
- struct php_ctlr_state_s *php_ctlr =
- (struct php_ctlr_state_s *)lphp_ctlr;
+ struct controller *ctrl = (struct controller *)data;
DBG_ENTER_ROUTINE
/* Poll for interrupt events. regs == NULL => polling */
- shpc_isr(0, php_ctlr->callback_instance_id);
+ shpc_isr(0, ctrl);
- init_timer(&php_ctlr->int_poll_timer);
+ init_timer(&ctrl->poll_timer);
if (!shpchp_poll_time)
shpchp_poll_time = 2; /* default polling interval is 2 sec */
- start_int_poll_timer(php_ctlr, shpchp_poll_time);
+ start_int_poll_timer(ctrl, shpchp_poll_time);
DBG_LEAVE_ROUTINE
}
@@ -290,16 +285,16 @@
/*
* This function starts the interrupt polling timer.
*/
-static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int sec)
+static void start_int_poll_timer(struct controller *ctrl, int sec)
{
/* Clamp to sane value */
if ((sec <= 0) || (sec > 60))
sec = 2;
- php_ctlr->int_poll_timer.function = &int_poll_timeout;
- php_ctlr->int_poll_timer.data = (unsigned long)php_ctlr;
- php_ctlr->int_poll_timer.expires = jiffies + sec * HZ;
- add_timer(&php_ctlr->int_poll_timer);
+ ctrl->poll_timer.function = &int_poll_timeout;
+ ctrl->poll_timer.data = (unsigned long)ctrl;
+ ctrl->poll_timer.expires = jiffies + sec * HZ;
+ add_timer(&ctrl->poll_timer);
}
static inline int is_ctrl_busy(struct controller *ctrl)
@@ -666,33 +661,8 @@
shpc_write_cmd(slot, slot->hp_slot, SET_PWR_BLINK);
}
-int shpc_get_ctlr_slot_config(struct controller *ctrl,
- int *num_ctlr_slots, /* number of slots in this HPC */
- int *first_device_num, /* PCI dev num of the first slot in this SHPC */
- int *physical_slot_num, /* phy slot num of the first slot in this SHPC */
- int *updown, /* physical_slot_num increament: 1 or -1 */
- int *flags)
-{
- u32 slot_config;
-
- DBG_ENTER_ROUTINE
-
- slot_config = shpc_readl(ctrl, SLOT_CONFIG);
- *first_device_num = (slot_config & FIRST_DEV_NUM) >> 8;
- *num_ctlr_slots = slot_config & SLOT_NUM;
- *physical_slot_num = (slot_config & PSN) >> 16;
- *updown = ((slot_config & UPDOWN) >> 29) ? 1 : -1;
-
- dbg("%s: physical_slot_num = %x\n", __FUNCTION__, *physical_slot_num);
-
- DBG_LEAVE_ROUTINE
- return 0;
-}
-
static void hpc_release_ctlr(struct controller *ctrl)
{
- struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle;
- struct php_ctlr_state_s *p, *p_prev;
int i;
u32 slot_reg, serr_int;
@@ -722,40 +692,15 @@
serr_int &= ~SERR_INTR_RSVDZ_MASK;
shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
- if (shpchp_poll_mode) {
- del_timer(&php_ctlr->int_poll_timer);
- } else {
- if (php_ctlr->irq) {
- free_irq(php_ctlr->irq, ctrl);
- php_ctlr->irq = 0;
- pci_disable_msi(php_ctlr->pci_dev);
- }
+ if (shpchp_poll_mode)
+ del_timer(&ctrl->poll_timer);
+ else {
+ free_irq(ctrl->pci_dev->irq, ctrl);
+ pci_disable_msi(ctrl->pci_dev);
}
- if (php_ctlr->pci_dev) {
- iounmap(php_ctlr->creg);
- release_mem_region(ctrl->mmio_base, ctrl->mmio_size);
- php_ctlr->pci_dev = NULL;
- }
-
- spin_lock(&list_lock);
- p = php_ctlr_list_head;
- p_prev = NULL;
- while (p) {
- if (p == php_ctlr) {
- if (p_prev)
- p_prev->pnext = p->pnext;
- else
- php_ctlr_list_head = p->pnext;
- break;
- } else {
- p_prev = p;
- p = p->pnext;
- }
- }
- spin_unlock(&list_lock);
-
- kfree(php_ctlr);
+ iounmap(ctrl->creg);
+ release_mem_region(ctrl->mmio_base, ctrl->mmio_size);
/*
* If this is the last controller to be released, destroy the
@@ -764,8 +709,7 @@
if (atomic_dec_and_test(&shpchp_num_controllers))
destroy_workqueue(shpchp_wq);
-DBG_LEAVE_ROUTINE
-
+ DBG_LEAVE_ROUTINE
}
static int hpc_power_on_slot(struct slot * slot)
@@ -891,7 +835,6 @@
static irqreturn_t shpc_isr(int irq, void *dev_id)
{
struct controller *ctrl = (struct controller *)dev_id;
- struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle;
u32 serr_int, slot_reg, intr_loc, intr_loc2;
int hp_slot;
@@ -942,20 +885,16 @@
__FUNCTION__, hp_slot, slot_reg);
if (slot_reg & MRL_CHANGE_DETECTED)
- php_ctlr->switch_change_callback(
- hp_slot, php_ctlr->callback_instance_id);
+ shpchp_handle_switch_change(hp_slot, ctrl);
if (slot_reg & BUTTON_PRESS_DETECTED)
- php_ctlr->attention_button_callback(
- hp_slot, php_ctlr->callback_instance_id);
+ shpchp_handle_attention_button(hp_slot, ctrl);
if (slot_reg & PRSNT_CHANGE_DETECTED)
- php_ctlr->presence_change_callback(
- hp_slot , php_ctlr->callback_instance_id);
+ shpchp_handle_presence_change(hp_slot, ctrl);
if (slot_reg & (ISO_PFAULT_DETECTED | CON_PFAULT_DETECTED))
- php_ctlr->power_fault_callback(
- hp_slot, php_ctlr->callback_instance_id);
+ shpchp_handle_power_fault(hp_slot, ctrl);
/* Clear all slot events */
slot_reg &= ~SLOT_REG_RSVDZ_MASK;
@@ -1114,10 +1053,8 @@
.release_ctlr = hpc_release_ctlr,
};
-int shpc_init(struct controller * ctrl, struct pci_dev * pdev)
+int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
{
- struct php_ctlr_state_s *php_ctlr, *p;
- void *instance_id = ctrl;
int rc = -1, num_slots = 0;
u8 hp_slot;
u32 shpc_base_offset;
@@ -1128,16 +1065,6 @@
ctrl->pci_dev = pdev; /* pci_dev of the P2P bridge */
- spin_lock_init(&list_lock);
- php_ctlr = kzalloc(sizeof(*php_ctlr), GFP_KERNEL);
-
- if (!php_ctlr) { /* allocate controller state data */
- err("%s: HPC controller memory allocation error!\n", __FUNCTION__);
- goto abort;
- }
-
- php_ctlr->pci_dev = pdev; /* save pci_dev in context */
-
if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device ==
PCI_DEVICE_ID_AMD_GOLAM_7450)) {
/* amd shpc driver doesn't use Base Offset; assume 0 */
@@ -1147,20 +1074,20 @@
ctrl->cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC);
if (!ctrl->cap_offset) {
err("%s : cap_offset == 0\n", __FUNCTION__);
- goto abort_free_ctlr;
+ goto abort;
}
dbg("%s: cap_offset = %x\n", __FUNCTION__, ctrl->cap_offset);
rc = shpc_indirect_read(ctrl, 0, &shpc_base_offset);
if (rc) {
err("%s: cannot read base_offset\n", __FUNCTION__);
- goto abort_free_ctlr;
+ goto abort;
}
rc = shpc_indirect_read(ctrl, 3, &tempdword);
if (rc) {
err("%s: cannot read slot config\n", __FUNCTION__);
- goto abort_free_ctlr;
+ goto abort;
}
num_slots = tempdword & SLOT_NUM;
dbg("%s: num_slots (indirect) %x\n", __FUNCTION__, num_slots);
@@ -1170,7 +1097,7 @@
if (rc) {
err("%s: cannot read creg (index = %d)\n",
__FUNCTION__, i);
- goto abort_free_ctlr;
+ goto abort;
}
dbg("%s: offset %d: value %x\n", __FUNCTION__,i,
tempdword);
@@ -1187,24 +1114,24 @@
rc = pci_enable_device(pdev);
if (rc) {
err("%s: pci_enable_device failed\n", __FUNCTION__);
- goto abort_free_ctlr;
+ goto abort;
}
if (!request_mem_region(ctrl->mmio_base, ctrl->mmio_size, MY_NAME)) {
err("%s: cannot reserve MMIO region\n", __FUNCTION__);
rc = -1;
- goto abort_free_ctlr;
+ goto abort;
}
- php_ctlr->creg = ioremap(ctrl->mmio_base, ctrl->mmio_size);
- if (!php_ctlr->creg) {
+ ctrl->creg = ioremap(ctrl->mmio_base, ctrl->mmio_size);
+ if (!ctrl->creg) {
err("%s: cannot remap MMIO region %lx @ %lx\n", __FUNCTION__,
ctrl->mmio_size, ctrl->mmio_base);
release_mem_region(ctrl->mmio_base, ctrl->mmio_size);
rc = -1;
- goto abort_free_ctlr;
+ goto abort;
}
- dbg("%s: php_ctlr->creg %p\n", __FUNCTION__, php_ctlr->creg);
+ dbg("%s: ctrl->creg %p\n", __FUNCTION__, ctrl->creg);
mutex_init(&ctrl->crit_sect);
mutex_init(&ctrl->cmd_lock);
@@ -1212,23 +1139,14 @@
/* Setup wait queue */
init_waitqueue_head(&ctrl->queue);
- /* Find the IRQ */
- php_ctlr->irq = pdev->irq;
- php_ctlr->attention_button_callback = shpchp_handle_attention_button,
- php_ctlr->switch_change_callback = shpchp_handle_switch_change;
- php_ctlr->presence_change_callback = shpchp_handle_presence_change;
- php_ctlr->power_fault_callback = shpchp_handle_power_fault;
- php_ctlr->callback_instance_id = instance_id;
-
- ctrl->hpc_ctlr_handle = php_ctlr;
ctrl->hpc_ops = &shpchp_hpc_ops;
/* Return PCI Controller Info */
slot_config = shpc_readl(ctrl, SLOT_CONFIG);
- php_ctlr->slot_device_offset = (slot_config & FIRST_DEV_NUM) >> 8;
- php_ctlr->num_slots = slot_config & SLOT_NUM;
- dbg("%s: slot_device_offset %x\n", __FUNCTION__, php_ctlr->slot_device_offset);
- dbg("%s: num_slots %x\n", __FUNCTION__, php_ctlr->num_slots);
+ ctrl->slot_device_offset = (slot_config & FIRST_DEV_NUM) >> 8;
+ ctrl->num_slots = slot_config & SLOT_NUM;
+ ctrl->first_slot = (slot_config & PSN) >> 16;
+ ctrl->slot_num_inc = ((slot_config & UPDOWN) >> 29) ? 1 : -1;
/* Mask Global Interrupt Mask & Command Complete Interrupt Mask */
tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
@@ -1243,7 +1161,7 @@
/* Mask the MRL sensor SERR Mask of individual slot in
* Slot SERR-INT Mask & clear all the existing event if any
*/
- for (hp_slot = 0; hp_slot < php_ctlr->num_slots; hp_slot++) {
+ for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
dbg("%s: Default Logical Slot Register %d value %x\n", __FUNCTION__,
hp_slot, slot_reg);
@@ -1255,24 +1173,27 @@
shpc_writel(ctrl, SLOT_REG(hp_slot), slot_reg);
}
- if (shpchp_poll_mode) {/* Install interrupt polling code */
- /* Install and start the interrupt polling timer */
- init_timer(&php_ctlr->int_poll_timer);
- start_int_poll_timer( php_ctlr, 10 ); /* start with 10 second delay */
+ if (shpchp_poll_mode) {
+ /* Install interrupt polling timer. Start with 10 sec delay */
+ init_timer(&ctrl->poll_timer);
+ start_int_poll_timer(ctrl, 10);
} else {
/* Installs the interrupt handler */
rc = pci_enable_msi(pdev);
if (rc) {
info("Can't get msi for the hotplug controller\n");
info("Use INTx for the hotplug controller\n");
- } else
- php_ctlr->irq = pdev->irq;
+ }
- rc = request_irq(php_ctlr->irq, shpc_isr, IRQF_SHARED, MY_NAME, (void *) ctrl);
- dbg("%s: request_irq %d for hpc%d (returns %d)\n", __FUNCTION__, php_ctlr->irq, ctlr_seq_num, rc);
+ rc = request_irq(ctrl->pci_dev->irq, shpc_isr, IRQF_SHARED,
+ MY_NAME, (void *)ctrl);
+ dbg("%s: request_irq %d for hpc%d (returns %d)\n",
+ __FUNCTION__, ctrl->pci_dev->irq,
+ atomic_read(&shpchp_num_controllers), rc);
if (rc) {
- err("Can't get irq %d for the hotplug controller\n", php_ctlr->irq);
- goto abort_free_ctlr;
+ err("Can't get irq %d for the hotplug controller\n",
+ ctrl->pci_dev->irq);
+ goto abort_iounmap;
}
}
dbg("%s: HPC at b:d:f:irq=0x%x:%x:%x:%x\n", __FUNCTION__,
@@ -1280,24 +1201,6 @@
PCI_FUNC(pdev->devfn), pdev->irq);
get_hp_hw_control_from_firmware(pdev);
- /* Add this HPC instance into the HPC list */
- spin_lock(&list_lock);
- if (php_ctlr_list_head == 0) {
- php_ctlr_list_head = php_ctlr;
- p = php_ctlr_list_head;
- p->pnext = NULL;
- } else {
- p = php_ctlr_list_head;
-
- while (p->pnext)
- p = p->pnext;
-
- p->pnext = php_ctlr;
- }
- spin_unlock(&list_lock);
-
- ctlr_seq_num++;
-
/*
* If this is the first controller to be initialized,
* initialize the shpchpd work queue
@@ -1306,14 +1209,14 @@
shpchp_wq = create_singlethread_workqueue("shpchpd");
if (!shpchp_wq) {
rc = -ENOMEM;
- goto abort_free_ctlr;
+ goto abort_iounmap;
}
}
/*
* Unmask all event interrupts of all slots
*/
- for (hp_slot = 0; hp_slot < php_ctlr->num_slots; hp_slot++) {
+ for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
dbg("%s: Default Logical Slot Register %d value %x\n", __FUNCTION__,
hp_slot, slot_reg);
@@ -1336,10 +1239,8 @@
return 0;
/* We end up here for the many possible ways to fail this API. */
-abort_free_ctlr:
- if (php_ctlr->creg)
- iounmap(php_ctlr->creg);
- kfree(php_ctlr);
+abort_iounmap:
+ iounmap(ctrl->creg);
abort:
DBG_LEAVE_ROUTINE
return rc;
diff --git a/drivers/pci/htirq.c b/drivers/pci/htirq.c
index 0a8d1cc..279c940 100644
--- a/drivers/pci/htirq.c
+++ b/drivers/pci/htirq.c
@@ -99,14 +99,7 @@
int pos;
int irq;
- pos = pci_find_capability(dev, PCI_CAP_ID_HT);
- while (pos) {
- u8 subtype;
- pci_read_config_byte(dev, pos + 3, &subtype);
- if (subtype == HT_CAPTYPE_IRQ)
- break;
- pos = pci_find_next_capability(dev, pos, PCI_CAP_ID_HT);
- }
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_IRQ);
if (!pos)
return -EINVAL;
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index e5ae3a0..b8d2385 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -162,14 +162,9 @@
const struct pci_device_id *pci_match_device(struct pci_driver *drv,
struct pci_dev *dev)
{
- const struct pci_device_id *id;
struct pci_dynid *dynid;
- id = pci_match_id(drv->id_table, dev);
- if (id)
- return id;
-
- /* static ids didn't match, lets look at the dynamic ones */
+ /* Look at the dynamic ids first, before the static ones */
spin_lock(&drv->dynids.lock);
list_for_each_entry(dynid, &drv->dynids.list, node) {
if (pci_match_one_device(&dynid->id, dev)) {
@@ -178,7 +173,8 @@
}
}
spin_unlock(&drv->dynids.lock);
- return NULL;
+
+ return pci_match_id(drv->id_table, dev);
}
static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev,
@@ -357,6 +353,8 @@
struct pci_dev * pci_dev = to_pci_dev(dev);
struct pci_driver * drv = pci_dev->driver;
+ pci_fixup_device(pci_fixup_resume, pci_dev);
+
if (drv && drv->resume_early)
error = drv->resume_early(pci_dev);
return error;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 5a14b73..6bfb942 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -68,12 +68,14 @@
#endif /* 0 */
-static int __pci_find_next_cap(struct pci_bus *bus, unsigned int devfn, u8 pos, int cap)
+#define PCI_FIND_CAP_TTL 48
+
+static int __pci_find_next_cap_ttl(struct pci_bus *bus, unsigned int devfn,
+ u8 pos, int cap, int *ttl)
{
u8 id;
- int ttl = 48;
- while (ttl--) {
+ while ((*ttl)--) {
pci_bus_read_config_byte(bus, devfn, pos, &pos);
if (pos < 0x40)
break;
@@ -89,6 +91,14 @@
return 0;
}
+static int __pci_find_next_cap(struct pci_bus *bus, unsigned int devfn,
+ u8 pos, int cap)
+{
+ int ttl = PCI_FIND_CAP_TTL;
+
+ return __pci_find_next_cap_ttl(bus, devfn, pos, cap, &ttl);
+}
+
int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap)
{
return __pci_find_next_cap(dev->bus, dev->devfn,
@@ -96,10 +106,10 @@
}
EXPORT_SYMBOL_GPL(pci_find_next_capability);
-static int __pci_bus_find_cap(struct pci_bus *bus, unsigned int devfn, u8 hdr_type, int cap)
+static int __pci_bus_find_cap_start(struct pci_bus *bus,
+ unsigned int devfn, u8 hdr_type)
{
u16 status;
- u8 pos;
pci_bus_read_config_word(bus, devfn, PCI_STATUS, &status);
if (!(status & PCI_STATUS_CAP_LIST))
@@ -108,15 +118,14 @@
switch (hdr_type) {
case PCI_HEADER_TYPE_NORMAL:
case PCI_HEADER_TYPE_BRIDGE:
- pos = PCI_CAPABILITY_LIST;
- break;
+ return PCI_CAPABILITY_LIST;
case PCI_HEADER_TYPE_CARDBUS:
- pos = PCI_CB_CAPABILITY_LIST;
- break;
+ return PCI_CB_CAPABILITY_LIST;
default:
return 0;
}
- return __pci_find_next_cap(bus, devfn, pos, cap);
+
+ return 0;
}
/**
@@ -140,7 +149,13 @@
*/
int pci_find_capability(struct pci_dev *dev, int cap)
{
- return __pci_bus_find_cap(dev->bus, dev->devfn, dev->hdr_type, cap);
+ int pos;
+
+ pos = __pci_bus_find_cap_start(dev->bus, dev->devfn, dev->hdr_type);
+ if (pos)
+ pos = __pci_find_next_cap(dev->bus, dev->devfn, pos, cap);
+
+ return pos;
}
/**
@@ -158,11 +173,16 @@
*/
int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap)
{
+ int pos;
u8 hdr_type;
pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &hdr_type);
- return __pci_bus_find_cap(bus, devfn, hdr_type & 0x7f, cap);
+ pos = __pci_bus_find_cap_start(bus, devfn, hdr_type & 0x7f);
+ if (pos)
+ pos = __pci_find_next_cap(bus, devfn, pos, cap);
+
+ return pos;
}
/**
@@ -214,6 +234,74 @@
}
EXPORT_SYMBOL_GPL(pci_find_ext_capability);
+static int __pci_find_next_ht_cap(struct pci_dev *dev, int pos, int ht_cap)
+{
+ int rc, ttl = PCI_FIND_CAP_TTL;
+ u8 cap, mask;
+
+ if (ht_cap == HT_CAPTYPE_SLAVE || ht_cap == HT_CAPTYPE_HOST)
+ mask = HT_3BIT_CAP_MASK;
+ else
+ mask = HT_5BIT_CAP_MASK;
+
+ pos = __pci_find_next_cap_ttl(dev->bus, dev->devfn, pos,
+ PCI_CAP_ID_HT, &ttl);
+ while (pos) {
+ rc = pci_read_config_byte(dev, pos + 3, &cap);
+ if (rc != PCIBIOS_SUCCESSFUL)
+ return 0;
+
+ if ((cap & mask) == ht_cap)
+ return pos;
+
+ pos = __pci_find_next_cap_ttl(dev->bus, dev->devfn, pos,
+ PCI_CAP_ID_HT, &ttl);
+ }
+
+ return 0;
+}
+/**
+ * pci_find_next_ht_capability - query a device's Hypertransport capabilities
+ * @dev: PCI device to query
+ * @pos: Position from which to continue searching
+ * @ht_cap: Hypertransport capability code
+ *
+ * To be used in conjunction with pci_find_ht_capability() to search for
+ * all capabilities matching @ht_cap. @pos should always be a value returned
+ * from pci_find_ht_capability().
+ *
+ * NB. To be 100% safe against broken PCI devices, the caller should take
+ * steps to avoid an infinite loop.
+ */
+int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap)
+{
+ return __pci_find_next_ht_cap(dev, pos + PCI_CAP_LIST_NEXT, ht_cap);
+}
+EXPORT_SYMBOL_GPL(pci_find_next_ht_capability);
+
+/**
+ * pci_find_ht_capability - query a device's Hypertransport capabilities
+ * @dev: PCI device to query
+ * @ht_cap: Hypertransport capability code
+ *
+ * Tell if a device supports a given Hypertransport capability.
+ * Returns an address within the device's PCI configuration space
+ * or 0 in case the device does not support the request capability.
+ * The address points to the PCI capability, of type PCI_CAP_ID_HT,
+ * which has a Hypertransport capability matching @ht_cap.
+ */
+int pci_find_ht_capability(struct pci_dev *dev, int ht_cap)
+{
+ int pos;
+
+ pos = __pci_bus_find_cap_start(dev->bus, dev->devfn, dev->hdr_type);
+ if (pos)
+ pos = __pci_find_next_ht_cap(dev, pos, ht_cap);
+
+ return pos;
+}
+EXPORT_SYMBOL_GPL(pci_find_ht_capability);
+
/**
* pci_find_parent_resource - return resource region of parent bus of given region
* @dev: PCI device structure contains resources to be searched
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index b4da795..f17e7ed 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -90,7 +90,7 @@
return -ENODEV;
pci_set_master(dev);
- if (!dev->irq) {
+ if (!dev->irq && dev->pin) {
printk(KERN_WARNING
"%s->Dev[%04x:%04x] has invalid IRQ. Check vendor BIOS\n",
__FUNCTION__, dev->device, dev->vendor);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 6a3c1e7..1ae9c3f 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -649,6 +649,9 @@
* Returns 0 on success and -1 if unknown type of device (not normal, bridge
* or CardBus).
*/
+
+#define LEGACY_IO_RESOURCE (IORESOURCE_IO | IORESOURCE_PCI_FIXED)
+
static int pci_setup_device(struct pci_dev * dev)
{
u32 class;
@@ -692,18 +695,18 @@
if ((progif & 1) == 0) {
dev->resource[0].start = 0x1F0;
dev->resource[0].end = 0x1F7;
- dev->resource[0].flags = IORESOURCE_IO;
+ dev->resource[0].flags = LEGACY_IO_RESOURCE;
dev->resource[1].start = 0x3F6;
dev->resource[1].end = 0x3F6;
- dev->resource[1].flags = IORESOURCE_IO;
+ dev->resource[1].flags = LEGACY_IO_RESOURCE;
}
if ((progif & 4) == 0) {
dev->resource[2].start = 0x170;
dev->resource[2].end = 0x177;
- dev->resource[2].flags = IORESOURCE_IO;
+ dev->resource[2].flags = LEGACY_IO_RESOURCE;
dev->resource[3].start = 0x376;
dev->resource[3].end = 0x376;
- dev->resource[3].flags = IORESOURCE_IO;
+ dev->resource[3].flags = LEGACY_IO_RESOURCE;
}
}
break;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 9ca9b9b..8f0322d 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -36,7 +36,7 @@
/* Deal with broken BIOS'es that neglect to enable passive release,
which can cause problems in combination with the 82441FX/PPro MTRRs */
-static void __devinit quirk_passive_release(struct pci_dev *dev)
+static void quirk_passive_release(struct pci_dev *dev)
{
struct pci_dev *d = NULL;
unsigned char dlc;
@@ -53,6 +53,7 @@
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release );
/* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround
but VIA don't answer queries. If you happen to have good contacts at VIA
@@ -134,7 +135,7 @@
* Updated based on further information from the site and also on
* information provided by VIA
*/
-static void __devinit quirk_vialatency(struct pci_dev *dev)
+static void quirk_vialatency(struct pci_dev *dev)
{
struct pci_dev *p;
u8 rev;
@@ -185,6 +186,10 @@
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency );
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency );
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency );
+/* Must restore this on a resume from RAM */
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency );
/*
* VIA Apollo VP3 needs ETBF on BT848/878
@@ -532,7 +537,7 @@
* TODO: When we have device-specific interrupt routers,
* this code will go away from quirks.
*/
-static void __devinit quirk_via_ioapic(struct pci_dev *dev)
+static void quirk_via_ioapic(struct pci_dev *dev)
{
u8 tmp;
@@ -548,6 +553,7 @@
pci_write_config_byte (dev, 0x58, tmp);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic );
/*
* VIA 8237: Some BIOSs don't set the 'Bypass APIC De-Assert Message' Bit.
@@ -555,7 +561,7 @@
* Set this bit to get rid of cycle wastage.
* Otherwise uncritical.
*/
-static void __devinit quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
+static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
{
u8 misc_control2;
#define BYPASS_APIC_DEASSERT 8
@@ -567,6 +573,7 @@
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
/*
* The AMD io apic can hang the box when an apic irq is masked.
@@ -600,7 +607,7 @@
#define AMD8131_revB0 0x11
#define AMD8131_MISC 0x40
#define AMD8131_NIOAMODE_BIT 0
-static void __init quirk_amd_8131_ioapic(struct pci_dev *dev)
+static void quirk_amd_8131_ioapic(struct pci_dev *dev)
{
unsigned char revid, tmp;
@@ -616,6 +623,7 @@
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
#endif /* CONFIG_X86_IO_APIC */
@@ -641,65 +649,84 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi );
-/*
- * Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip
- * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
- * when written, it makes an internal connection to the PIC.
- * For these devices, this register is defined to be 4 bits wide.
- * Normally this is fine. However for IO-APIC motherboards, or
- * non-x86 architectures (yes Via exists on PPC among other places),
- * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
- * interrupts delivered properly.
- *
- * Some of the on-chip devices are actually '586 devices' so they are
- * listed here.
- */
-
-static int via_irq_fixup_needed = -1;
/*
- * As some VIA hardware is available in PCI-card form, we need to restrict
- * this quirk to VIA PCI hardware built onto VIA-based motherboards only.
- * We try to locate a VIA southbridge before deciding whether the quirk
- * should be applied.
+ * VIA bridges which have VLink
*/
-static const struct pci_device_id via_irq_fixup_tbl[] = {
- {
- .vendor = PCI_VENDOR_ID_VIA,
- .device = PCI_ANY_ID,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = PCI_CLASS_BRIDGE_ISA << 8,
- .class_mask = 0xffff00,
- },
+
+static const struct pci_device_id via_vlink_fixup_tbl[] = {
+ /* Internal devices need IRQ line routing, pre VLink */
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C686), 0 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8231), 17 },
+ /* Devices with VLink */
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233_0), 17},
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233A), 17 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233C_0), 17 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8235), 16 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8237), 15 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8237A), 15 },
{ 0, },
};
-static void quirk_via_irq(struct pci_dev *dev)
+/**
+ * quirk_via_vlink - VIA VLink IRQ number update
+ * @dev: PCI device
+ *
+ * If the device we are dealing with is on a PIC IRQ we need to
+ * ensure that the IRQ line register which usually is not relevant
+ * for PCI cards, is actually written so that interrupts get sent
+ * to the right place
+ */
+
+static void quirk_via_vlink(struct pci_dev *dev)
{
+ const struct pci_device_id *via_vlink_fixup;
+ static int dev_lo = -1, dev_hi = 18;
u8 irq, new_irq;
- if (via_irq_fixup_needed == -1)
- via_irq_fixup_needed = pci_dev_present(via_irq_fixup_tbl);
+ /* Check if we have VLink and cache the result */
- if (!via_irq_fixup_needed)
+ /* Checked already - no */
+ if (dev_lo == -2)
return;
+ /* Not checked - see what bridge we have and find the device
+ ranges */
+
+ if (dev_lo == -1) {
+ via_vlink_fixup = pci_find_present(via_vlink_fixup_tbl);
+ if (via_vlink_fixup == NULL) {
+ dev_lo = -2;
+ return;
+ }
+ dev_lo = via_vlink_fixup->driver_data;
+ /* 82C686 is special - 0/0 */
+ if (dev_lo == 0)
+ dev_hi = 0;
+ }
new_irq = dev->irq;
/* Don't quirk interrupts outside the legacy IRQ range */
if (!new_irq || new_irq > 15)
return;
+ /* Internal device ? */
+ if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > dev_hi ||
+ PCI_SLOT(dev->devfn) < dev_lo)
+ return;
+
+ /* This is an internal VLink device on a PIC interrupt. The BIOS
+ ought to have set this but may not have, so we redo it */
+
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
if (new_irq != irq) {
- printk(KERN_INFO "PCI: VIA IRQ fixup for %s, from %d to %d\n",
+ printk(KERN_INFO "PCI: VIA VLink IRQ fixup for %s, from %d to %d\n",
pci_name(dev), irq, new_irq);
udelay(15); /* unknown if delay really needed */
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
}
}
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink);
/*
* VIA VT82C598 has its device ID settable and many BIOSes
@@ -720,13 +747,14 @@
* do this even if the Linux CardBus driver is not loaded, because
* the Linux i82365 driver does not (and should not) handle CardBus.
*/
-static void __devinit quirk_cardbus_legacy(struct pci_dev *dev)
+static void quirk_cardbus_legacy(struct pci_dev *dev)
{
if ((PCI_CLASS_BRIDGE_CARDBUS << 8) ^ dev->class)
return;
pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0);
}
DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
+DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
/*
* Following the PCI ordering rules is optional on the AMD762. I'm not
@@ -735,7 +763,7 @@
* To be fair to AMD, it follows the spec by default, its BIOS people
* who turn it off!
*/
-static void __devinit quirk_amd_ordering(struct pci_dev *dev)
+static void quirk_amd_ordering(struct pci_dev *dev)
{
u32 pcic;
pci_read_config_dword(dev, 0x4C, &pcic);
@@ -749,6 +777,7 @@
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering );
/*
* DreamWorks provided workaround for Dunord I-3000 problem
@@ -784,7 +813,7 @@
* datasheets found at http://www.national.com/ds/GX for info on what
* these bits do. <christer@weinigel.se>
*/
-static void __init quirk_mediagx_master(struct pci_dev *dev)
+static void quirk_mediagx_master(struct pci_dev *dev)
{
u8 reg;
pci_read_config_byte(dev, 0x41, ®);
@@ -795,13 +824,14 @@
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master );
/*
* Ensure C0 rev restreaming is off. This is normally done by
* the BIOS but in the odd case it is not the results are corruption
* hence the presence of a Linux check
*/
-static void __init quirk_disable_pxb(struct pci_dev *pdev)
+static void quirk_disable_pxb(struct pci_dev *pdev)
{
u16 config;
u8 rev;
@@ -817,8 +847,26 @@
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb );
+static void __devinit quirk_sb600_sata(struct pci_dev *pdev)
+{
+ /* set sb600 sata to ahci mode */
+ if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
+ u8 tmp;
+
+ pci_read_config_byte(pdev, 0x40, &tmp);
+ pci_write_config_byte(pdev, 0x40, tmp|1);
+ pci_write_config_byte(pdev, 0x9, 1);
+ pci_write_config_byte(pdev, 0xa, 6);
+ pci_write_config_byte(pdev, 0x40, tmp);
+
+ pdev->class = 0x010601;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_sb600_sata);
+
/*
* Serverworks CSB5 IDE does not fully support native mode
*/
@@ -874,7 +922,7 @@
* runs everywhere at present we suppress the printk output in most
* irrelevant cases.
*/
-static void __init k8t_sound_hostbridge(struct pci_dev *dev)
+static void k8t_sound_hostbridge(struct pci_dev *dev)
{
unsigned char val;
@@ -893,8 +941,8 @@
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge);
-#ifndef CONFIG_ACPI_SLEEP
/*
* On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
* is not activated. The myth is that Asus said that they do not want the
@@ -906,10 +954,6 @@
* bridge. Unfortunately, this device has no subvendor/subdevice ID. So it
* becomes necessary to do this tweak in two steps -- I've chosen the Host
* bridge as trigger.
- *
- * Actually, leaving it unhidden and not redoing the quirk over suspend2ram
- * will cause thermal management to break down, and causing machine to
- * overheat.
*/
static int __initdata asus_hides_smbus;
@@ -1019,7 +1063,7 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge );
-static void __init asus_hides_smbus_lpc(struct pci_dev *dev)
+static void asus_hides_smbus_lpc(struct pci_dev *dev)
{
u16 val;
@@ -1042,8 +1086,14 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc );
-static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
+static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
{
u32 val, rcba;
void __iomem *base;
@@ -1059,13 +1109,12 @@
printk(KERN_INFO "PCI: Enabled ICH6/i801 SMBus device\n");
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6 );
-
-#endif
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6 );
/*
* SiS 96x south bridge: BIOS typically hides SMBus device...
*/
-static void __init quirk_sis_96x_smbus(struct pci_dev *dev)
+static void quirk_sis_96x_smbus(struct pci_dev *dev)
{
u8 val = 0;
printk(KERN_INFO "Enabling SiS 96x SMBus.\n");
@@ -1086,7 +1135,7 @@
#define SIS_DETECT_REGISTER 0x40
-static void __init quirk_sis_503(struct pci_dev *dev)
+static void quirk_sis_503(struct pci_dev *dev)
{
u8 reg;
u16 devid;
@@ -1122,13 +1171,14 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_735, quirk_sis_96x_compatible );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503 );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503 );
/*
* On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller
* and MC97 modem controller are disabled when a second PCI soundcard is
* present. This patch, tweaking the VT8237 ISA bridge, enables them.
* -- bjd
*/
-static void __init asus_hides_ac97_lpc(struct pci_dev *dev)
+static void asus_hides_ac97_lpc(struct pci_dev *dev)
{
u8 val;
int asus_hides_ac97 = 0;
@@ -1159,6 +1209,14 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc );
+
+
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus );
+
#if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE)
/*
@@ -1167,7 +1225,7 @@
* the PCI scanning.
*/
-static void __devinit quirk_jmicron_dualfn(struct pci_dev *pdev)
+static void quirk_jmicron_dualfn(struct pci_dev *pdev)
{
u32 conf;
u8 hdr;
@@ -1205,6 +1263,7 @@
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
#endif
@@ -1532,6 +1591,8 @@
extern struct pci_fixup __end_pci_fixups_final[];
extern struct pci_fixup __start_pci_fixups_enable[];
extern struct pci_fixup __end_pci_fixups_enable[];
+extern struct pci_fixup __start_pci_fixups_resume[];
+extern struct pci_fixup __end_pci_fixups_resume[];
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
@@ -1559,6 +1620,11 @@
end = __end_pci_fixups_enable;
break;
+ case pci_fixup_resume:
+ start = __start_pci_fixups_resume;
+ end = __end_pci_fixups_resume;
+ break;
+
default:
/* stupid compiler warning, you would think with an enum... */
return;
@@ -1596,7 +1662,7 @@
* Force it to be linked by setting the corresponding control bit in the
* config space.
*/
-static void __devinit quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev)
+static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev)
{
uint8_t b;
if (pci_read_config_byte(dev, 0xf41, &b) == 0) {
@@ -1610,6 +1676,8 @@
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
quirk_nvidia_ck804_pcie_aer_ext_cap);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
+ quirk_nvidia_ck804_pcie_aer_ext_cap);
#ifdef CONFIG_PCI_MSI
/* To disable MSI globally */
@@ -1644,19 +1712,23 @@
* return 1 if a HT MSI capability is found and enabled */
static int __devinit msi_ht_cap_enabled(struct pci_dev *dev)
{
- u8 pos;
- int ttl;
- for (pos = pci_find_capability(dev, PCI_CAP_ID_HT), ttl = 48;
- pos && ttl;
- pos = pci_find_next_capability(dev, pos, PCI_CAP_ID_HT), ttl--) {
- u32 cap_hdr;
- /* MSI mapping section according to Hypertransport spec */
- if (pci_read_config_dword(dev, pos, &cap_hdr) == 0
- && (cap_hdr & 0xf8000000) == 0xa8000000 /* MSI mapping */) {
- printk(KERN_INFO "PCI: Found HT MSI mapping on %s with capability %s\n",
- pci_name(dev), cap_hdr & 0x10000 ? "enabled" : "disabled");
- return (cap_hdr & 0x10000) != 0; /* MSI mapping cap enabled */
+ int pos, ttl = 48;
+
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+ while (pos && ttl--) {
+ u8 flags;
+
+ if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+ &flags) == 0)
+ {
+ printk(KERN_INFO "PCI: Found %s HT MSI Mapping on %s\n",
+ flags & HT_MSI_FLAGS_ENABLE ?
+ "enabled" : "disabled", pci_name(dev));
+ return (flags & HT_MSI_FLAGS_ENABLE) != 0;
}
+
+ pos = pci_find_next_ht_capability(dev, pos,
+ HT_CAPTYPE_MSI_MAPPING);
}
return 0;
}
@@ -1688,8 +1760,9 @@
* a single one having MSI is enough to be sure that MSI are supported.
*/
pdev = pci_get_slot(dev->bus, 0);
- if (dev->subordinate && !msi_ht_cap_enabled(dev)
- && !msi_ht_cap_enabled(pdev)) {
+ if (!pdev)
+ return;
+ if (!msi_ht_cap_enabled(dev) && !msi_ht_cap_enabled(pdev)) {
printk(KERN_WARNING "PCI: MSI quirk detected. "
"MSI disabled on chipset %s.\n",
pci_name(dev));
diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index 2f13eba..45f2b20 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -413,6 +413,24 @@
return dev;
}
+const struct pci_device_id *pci_find_present(const struct pci_device_id *ids)
+{
+ struct pci_dev *dev;
+ const struct pci_device_id *found = NULL;
+
+ WARN_ON(in_interrupt());
+ down_read(&pci_bus_sem);
+ while (ids->vendor || ids->subvendor || ids->class_mask) {
+ list_for_each_entry(dev, &pci_devices, global_list) {
+ if ((found = pci_match_one_device(ids, dev)) != NULL)
+ break;
+ }
+ ids++;
+ }
+ up_read(&pci_bus_sem);
+ return found;
+}
+
/**
* pci_dev_present - Returns 1 if device matching the device list is present, 0 if not.
* @ids: A pointer to a null terminated list of struct pci_device_id structures
@@ -426,25 +444,11 @@
*/
int pci_dev_present(const struct pci_device_id *ids)
{
- struct pci_dev *dev;
- int found = 0;
-
- WARN_ON(in_interrupt());
- down_read(&pci_bus_sem);
- while (ids->vendor || ids->subvendor || ids->class_mask) {
- list_for_each_entry(dev, &pci_devices, global_list) {
- if (pci_match_one_device(ids, dev)) {
- found = 1;
- goto exit;
- }
- }
- ids++;
- }
-exit:
- up_read(&pci_bus_sem);
- return found;
+ return pci_find_present(ids) == NULL ? 0 : 1;
}
+
EXPORT_SYMBOL(pci_dev_present);
+EXPORT_SYMBOL(pci_find_present);
EXPORT_SYMBOL(pci_find_device);
EXPORT_SYMBOL(pci_find_device_reverse);
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index ab78e4b..cb4ced3 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -33,11 +33,22 @@
u32 new, check, mask;
int reg;
- /* Ignore resources for unimplemented BARs and unused resource slots
- for 64 bit BARs. */
+ /*
+ * Ignore resources for unimplemented BARs and unused resource slots
+ * for 64 bit BARs.
+ */
if (!res->flags)
return;
+ /*
+ * Ignore non-moveable resources. This might be legacy resources for
+ * which no functional BAR register exists or another important
+ * system resource we should better not move around in system address
+ * space.
+ */
+ if (res->flags & IORESOURCE_PCI_FIXED)
+ return;
+
pcibios_resource_to_bus(dev, ®ion, res);
pr_debug(" got res [%llx:%llx] bus [%lx:%lx] flags %lx for "
@@ -212,6 +223,10 @@
resource_size_t r_align;
r = &dev->resource[i];
+
+ if (r->flags & IORESOURCE_PCI_FIXED)
+ continue;
+
r_align = r->end - r->start;
if (!(r->flags) || r->parent)
diff --git a/drivers/s390/char/sclp_cpi.c b/drivers/s390/char/sclp_cpi.c
index f7c10d9..4f873ae 100644
--- a/drivers/s390/char/sclp_cpi.c
+++ b/drivers/s390/char/sclp_cpi.c
@@ -49,6 +49,8 @@
.send_mask = EvTyp_CtlProgIdent_Mask
};
+MODULE_LICENSE("GPL");
+
MODULE_AUTHOR(
"Martin Peschke, IBM Deutschland Entwicklung GmbH "
"<mpeschke@de.ibm.com>");
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index 7835a71..3a403f1 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -871,11 +871,32 @@
return -EBUSY;
}
+static int pgm_check_occured;
+
+static void cio_reset_pgm_check_handler(void)
+{
+ pgm_check_occured = 1;
+}
+
+static int stsch_reset(struct subchannel_id schid, volatile struct schib *addr)
+{
+ int rc;
+
+ pgm_check_occured = 0;
+ s390_reset_pgm_handler = cio_reset_pgm_check_handler;
+ rc = stsch(schid, addr);
+ s390_reset_pgm_handler = NULL;
+ if (pgm_check_occured)
+ return -EIO;
+ else
+ return rc;
+}
+
static int __shutdown_subchannel_easy(struct subchannel_id schid, void *data)
{
struct schib schib;
- if (stsch_err(schid, &schib))
+ if (stsch_reset(schid, &schib))
return -ENXIO;
if (!schib.pmcw.ena)
return 0;
@@ -972,7 +993,7 @@
struct schib schib;
struct sch_match_id *match_id = data;
- if (stsch_err(schid, &schib))
+ if (stsch_reset(schid, &schib))
return -ENXIO;
if (schib.pmcw.dnv &&
(schib.pmcw.dev == match_id->devid.devno) &&
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 4c81d890..9d6c024 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -139,6 +139,8 @@
sch->dev.release = &css_subchannel_release;
sch->dev.groups = subch_attr_groups;
+ css_get_ssd_info(sch);
+
/* make it known to the system */
ret = css_sch_device_register(sch);
if (ret) {
@@ -146,7 +148,6 @@
__func__, sch->dev.bus_id);
return ret;
}
- css_get_ssd_info(sch);
return ret;
}
diff --git a/drivers/s390/cio/qdio.c b/drivers/s390/cio/qdio.c
index 9d4ea44..6fd1940 100644
--- a/drivers/s390/cio/qdio.c
+++ b/drivers/s390/cio/qdio.c
@@ -979,12 +979,11 @@
if (q->is_iqdio_q) {
/*
- * for asynchronous queues, we better check, if the fill
- * level is too high. for synchronous queues, the fill
- * level will never be that high.
+ * for asynchronous queues, we better check, if the sent
+ * buffer is already switched from PRIMED to EMPTY.
*/
- if (atomic_read(&q->number_of_buffers_used)>
- IQDIO_FILL_LEVEL_TO_POLL)
+ if ((q->queue_type == QDIO_IQDIO_QFMT_ASYNCH) &&
+ !qdio_is_outbound_q_done(q))
qdio_mark_q(q);
} else if (!q->hydra_gives_outbound_pcis)
@@ -1825,6 +1824,10 @@
q->sbal[j]=*(outbound_sbals_array++);
q->queue_type=q_format;
+ if ((q->queue_type == QDIO_IQDIO_QFMT) &&
+ (no_output_qs > 1) &&
+ (i == no_output_qs-1))
+ q->queue_type = QDIO_IQDIO_QFMT_ASYNCH;
q->int_parm=int_parm;
q->is_input_q=0;
q->schid = irq_ptr->schid;
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index ad60afe..81b5899 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -1129,7 +1129,15 @@
mutex_unlock(&ap_poll_thread_mutex);
}
-static void ap_reset(void)
+static void ap_reset_domain(void)
+{
+ int i;
+
+ for (i = 0; i < AP_DEVICES; i++)
+ ap_reset_queue(AP_MKQID(i, ap_domain_index));
+}
+
+static void ap_reset_all(void)
{
int i, j;
@@ -1139,7 +1147,7 @@
}
static struct reset_call ap_reset_call = {
- .fn = ap_reset,
+ .fn = ap_reset_all,
};
/**
@@ -1229,10 +1237,12 @@
int i;
struct device *dev;
+ ap_reset_domain();
ap_poll_thread_stop();
del_timer_sync(&ap_config_timer);
del_timer_sync(&ap_poll_timer);
destroy_workqueue(ap_work_queue);
+ tasklet_kill(&ap_tasklet);
s390_root_dev_unregister(ap_root_device);
while ((dev = bus_find_device(&ap_bus_type, NULL, NULL,
__ap_match_all)))
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 1748e27..f02f48a 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -265,13 +265,11 @@
if (!rq->bio)
blk_rq_bio_prep(q, rq, bio);
- else if (!q->back_merge_fn(q, rq, bio))
+ else if (!ll_back_merge_fn(q, rq, bio))
return -EINVAL;
else {
rq->biotail->bi_next = bio;
rq->biotail = bio;
- rq->hard_nr_sectors += bio_sectors(bio);
- rq->nr_sectors = rq->hard_nr_sectors;
}
return 0;
diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c
index 43f5b6a..98e3fe1 100644
--- a/drivers/scsi/sun3_NCR5380.c
+++ b/drivers/scsi/sun3_NCR5380.c
@@ -266,7 +266,7 @@
(struct NCR5380_hostdata *)(in)->hostdata
#define HOSTDATA(in) ((struct NCR5380_hostdata *)(in)->hostdata)
-#define NEXT(cmd) ((struct scsi_cmnd *)((cmd)->host_scribble))
+#define NEXT(cmd) (*(struct scsi_cmnd **)&((cmd)->host_scribble))
#define NEXTADDR(cmd) ((struct scsi_cmnd **)&((cmd)->host_scribble))
#define HOSTNO instance->host_no
@@ -650,7 +650,7 @@
#include <linux/interrupt.h>
static volatile int main_running = 0;
-static DECLARE_WORK(NCR5380_tqueue, (void (*)(void*))NCR5380_main, NULL);
+static DECLARE_WORK(NCR5380_tqueue, NCR5380_main);
static __inline__ void queue_main(void)
{
@@ -1031,7 +1031,7 @@
* reenable them. This prevents reentrancy and kernel stack overflow.
*/
-static void NCR5380_main (void *bl)
+static void NCR5380_main (struct work_struct *bl)
{
struct scsi_cmnd *tmp, *prev;
struct Scsi_Host *instance = first_instance;
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 6303970..24ee8be 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -130,7 +130,7 @@
struct usblp {
struct usb_device *dev; /* USB device */
- struct semaphore sem; /* locks this struct, especially "dev" */
+ struct mutex mut; /* locks this struct, especially "dev" */
char *writebuf; /* write transfer_buffer */
char *readbuf; /* read transfer_buffer */
char *statusbuf; /* status transfer_buffer */
@@ -465,7 +465,7 @@
int twoints[2];
int retval = 0;
- down (&usblp->sem);
+ mutex_lock (&usblp->mut);
if (!usblp->present) {
retval = -ENODEV;
goto done;
@@ -644,14 +644,14 @@
}
done:
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
return retval;
}
static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
{
struct usblp *usblp = file->private_data;
- int timeout, rv, err = 0, transfer_length = 0;
+ int timeout, intr, rv, err = 0, transfer_length = 0;
size_t writecount = 0;
while (writecount < count) {
@@ -668,14 +668,16 @@
if (rv < 0)
return writecount ? writecount : -EINTR;
}
- down (&usblp->sem);
+ intr = mutex_lock_interruptible (&usblp->mut);
+ if (intr)
+ return writecount ? writecount : -EINTR;
if (!usblp->present) {
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
return -ENODEV;
}
if (usblp->sleeping) {
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
return writecount ? writecount : -ENODEV;
}
@@ -687,10 +689,10 @@
err = usblp->writeurb->status;
} else
err = usblp_check_status(usblp, err);
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
/* if the fault was due to disconnect, let khubd's
- * call to usblp_disconnect() grab usblp->sem ...
+ * call to usblp_disconnect() grab usblp->mut ...
*/
schedule ();
continue;
@@ -702,7 +704,7 @@
*/
writecount += transfer_length;
if (writecount == count) {
- up(&usblp->sem);
+ mutex_unlock(&usblp->mut);
break;
}
@@ -714,7 +716,7 @@
if (copy_from_user(usblp->writeurb->transfer_buffer,
buffer + writecount, transfer_length)) {
- up(&usblp->sem);
+ mutex_unlock(&usblp->mut);
return writecount ? writecount : -EFAULT;
}
@@ -727,10 +729,10 @@
count = -EIO;
else
count = writecount ? writecount : -ENOMEM;
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
break;
}
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
}
return count;
@@ -739,12 +741,14 @@
static ssize_t usblp_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
{
struct usblp *usblp = file->private_data;
- int rv;
+ int rv, intr;
if (!usblp->bidir)
return -EINVAL;
- down (&usblp->sem);
+ intr = mutex_lock_interruptible (&usblp->mut);
+ if (intr)
+ return -EINTR;
if (!usblp->present) {
count = -ENODEV;
goto done;
@@ -757,9 +761,9 @@
count = -EAGAIN;
goto done;
}
- up(&usblp->sem);
+ mutex_unlock(&usblp->mut);
rv = wait_event_interruptible(usblp->wait, usblp->rcomplete || !usblp->present);
- down(&usblp->sem);
+ mutex_lock(&usblp->mut);
if (rv < 0) {
count = -EINTR;
goto done;
@@ -807,7 +811,7 @@
}
done:
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
return count;
}
@@ -886,7 +890,7 @@
goto abort;
}
usblp->dev = dev;
- init_MUTEX (&usblp->sem);
+ mutex_init (&usblp->mut);
init_waitqueue_head(&usblp->wait);
usblp->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
usblp->intf = intf;
@@ -1178,7 +1182,7 @@
device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
mutex_lock (&usblp_mutex);
- down (&usblp->sem);
+ mutex_lock (&usblp->mut);
usblp->present = 0;
usb_set_intfdata (intf, NULL);
@@ -1187,7 +1191,7 @@
usblp->writebuf, usblp->writeurb->transfer_dma);
usb_buffer_free (usblp->dev, USBLP_BUF_SIZE,
usblp->readbuf, usblp->readurb->transfer_dma);
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
if (!usblp->used)
usblp_cleanup (usblp);
@@ -1200,11 +1204,11 @@
/* this races against normal access and open */
mutex_lock (&usblp_mutex);
- down (&usblp->sem);
+ mutex_lock (&usblp->mut);
/* we take no more IO */
usblp->sleeping = 1;
usblp_unlink_urbs(usblp);
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
mutex_unlock (&usblp_mutex);
return 0;
@@ -1216,12 +1220,12 @@
int r;
mutex_lock (&usblp_mutex);
- down (&usblp->sem);
+ mutex_lock (&usblp->mut);
usblp->sleeping = 0;
r = handle_bidir (usblp);
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
mutex_unlock (&usblp_mutex);
return r;
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 3ed4cb2..4b3a6ab 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -962,7 +962,11 @@
kfree(dr);
return -EFAULT;
}
- snoop(&ps->dev->dev, "control urb\n");
+ snoop(&ps->dev->dev, "control urb: bRequest=%02x "
+ "bRrequestType=%02x wValue=%04x "
+ "wIndex=%04x wLength=%04x\n",
+ dr->bRequest, dr->bRequestType, dr->wValue,
+ dr->wIndex, dr->wLength);
break;
case USBDEVFS_URB_TYPE_BULK:
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 3e0abbb..812c733 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -43,14 +43,16 @@
#include <linux/usb_gadget.h>
#include <asm/byteorder.h>
+#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
#include <asm/arch/gpio.h>
#include <asm/arch/board.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/at91sam9261_matrix.h>
#include "at91_udc.h"
@@ -78,27 +80,11 @@
static const char driver_name [] = "at91_udc";
static const char ep0name[] = "ep0";
-/*-------------------------------------------------------------------------*/
-/*
- * Read from a UDP register.
- */
-static inline unsigned long at91_udp_read(unsigned int reg)
-{
- void __iomem *udp_base = (void __iomem *)AT91_VA_BASE_UDP;
-
- return __raw_readl(udp_base + reg);
-}
-
-/*
- * Write to a UDP register.
- */
-static inline void at91_udp_write(unsigned int reg, unsigned long value)
-{
- void __iomem *udp_base = (void __iomem *)AT91_VA_BASE_UDP;
-
- __raw_writel(value, udp_base + reg);
-}
+#define at91_udp_read(dev, reg) \
+ __raw_readl((dev)->udp_baseaddr + (reg))
+#define at91_udp_write(dev, reg, val) \
+ __raw_writel((val), (dev)->udp_baseaddr + (reg))
/*-------------------------------------------------------------------------*/
@@ -210,13 +196,13 @@
return 0;
}
- tmp = at91_udp_read(AT91_UDP_FRM_NUM);
+ tmp = at91_udp_read(udc, AT91_UDP_FRM_NUM);
seq_printf(s, "frame %05x:%s%s frame=%d\n", tmp,
(tmp & AT91_UDP_FRM_OK) ? " ok" : "",
(tmp & AT91_UDP_FRM_ERR) ? " err" : "",
(tmp & AT91_UDP_NUM));
- tmp = at91_udp_read(AT91_UDP_GLB_STAT);
+ tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
seq_printf(s, "glbstate %02x:%s" FOURBITS "\n", tmp,
(tmp & AT91_UDP_RMWUPE) ? " rmwupe" : "",
(tmp & AT91_UDP_RSMINPR) ? " rsminpr" : "",
@@ -224,13 +210,13 @@
(tmp & AT91_UDP_CONFG) ? " confg" : "",
(tmp & AT91_UDP_FADDEN) ? " fadden" : "");
- tmp = at91_udp_read(AT91_UDP_FADDR);
+ tmp = at91_udp_read(udc, AT91_UDP_FADDR);
seq_printf(s, "faddr %03x:%s fadd=%d\n", tmp,
(tmp & AT91_UDP_FEN) ? " fen" : "",
(tmp & AT91_UDP_FADD));
- proc_irq_show(s, "imr ", at91_udp_read(AT91_UDP_IMR));
- proc_irq_show(s, "isr ", at91_udp_read(AT91_UDP_ISR));
+ proc_irq_show(s, "imr ", at91_udp_read(udc, AT91_UDP_IMR));
+ proc_irq_show(s, "isr ", at91_udp_read(udc, AT91_UDP_ISR));
if (udc->enabled && udc->vbus) {
proc_ep_show(s, &udc->ep[0]);
@@ -286,6 +272,7 @@
static void done(struct at91_ep *ep, struct at91_request *req, int status)
{
unsigned stopped = ep->stopped;
+ struct at91_udc *udc = ep->udc;
list_del_init(&req->queue);
if (req->req.status == -EINPROGRESS)
@@ -301,7 +288,7 @@
/* ep0 is always ready; other endpoints need a non-empty queue */
if (list_empty(&ep->queue) && ep->int_mask != (1 << 0))
- at91_udp_write(AT91_UDP_IDR, ep->int_mask);
+ at91_udp_write(udc, AT91_UDP_IDR, ep->int_mask);
}
/*-------------------------------------------------------------------------*/
@@ -554,8 +541,8 @@
* reset/init endpoint fifo. NOTE: leaves fifo_bank alone,
* since endpoint resets don't reset hw pingpong state.
*/
- at91_udp_write(AT91_UDP_RST_EP, ep->int_mask);
- at91_udp_write(AT91_UDP_RST_EP, 0);
+ at91_udp_write(dev, AT91_UDP_RST_EP, ep->int_mask);
+ at91_udp_write(dev, AT91_UDP_RST_EP, 0);
local_irq_restore(flags);
return 0;
@@ -564,6 +551,7 @@
static int at91_ep_disable (struct usb_ep * _ep)
{
struct at91_ep *ep = container_of(_ep, struct at91_ep, ep);
+ struct at91_udc *udc = ep->udc;
unsigned long flags;
if (ep == &ep->udc->ep[0])
@@ -579,8 +567,8 @@
/* reset fifos and endpoint */
if (ep->udc->clocked) {
- at91_udp_write(AT91_UDP_RST_EP, ep->int_mask);
- at91_udp_write(AT91_UDP_RST_EP, 0);
+ at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+ at91_udp_write(udc, AT91_UDP_RST_EP, 0);
__raw_writel(0, ep->creg);
}
@@ -695,10 +683,10 @@
* reconfigures the endpoints.
*/
if (dev->wait_for_config_ack) {
- tmp = at91_udp_read(AT91_UDP_GLB_STAT);
+ tmp = at91_udp_read(dev, AT91_UDP_GLB_STAT);
tmp ^= AT91_UDP_CONFG;
VDBG("toggle config\n");
- at91_udp_write(AT91_UDP_GLB_STAT, tmp);
+ at91_udp_write(dev, AT91_UDP_GLB_STAT, tmp);
}
if (req->req.length == 0) {
ep0_in_status:
@@ -727,7 +715,7 @@
if (req && !status) {
list_add_tail (&req->queue, &ep->queue);
- at91_udp_write(AT91_UDP_IER, ep->int_mask);
+ at91_udp_write(dev, AT91_UDP_IER, ep->int_mask);
}
done:
local_irq_restore(flags);
@@ -758,6 +746,7 @@
static int at91_ep_set_halt(struct usb_ep *_ep, int value)
{
struct at91_ep *ep = container_of(_ep, struct at91_ep, ep);
+ struct at91_udc *udc = ep->udc;
u32 __iomem *creg;
u32 csr;
unsigned long flags;
@@ -785,8 +774,8 @@
csr |= AT91_UDP_FORCESTALL;
VDBG("halt %s\n", ep->ep.name);
} else {
- at91_udp_write(AT91_UDP_RST_EP, ep->int_mask);
- at91_udp_write(AT91_UDP_RST_EP, 0);
+ at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+ at91_udp_write(udc, AT91_UDP_RST_EP, 0);
csr &= ~AT91_UDP_FORCESTALL;
}
__raw_writel(csr, creg);
@@ -813,9 +802,11 @@
static int at91_get_frame(struct usb_gadget *gadget)
{
+ struct at91_udc *udc = to_udc(gadget);
+
if (!to_udc(gadget)->clocked)
return -EINVAL;
- return at91_udp_read(AT91_UDP_FRM_NUM) & AT91_UDP_NUM;
+ return at91_udp_read(udc, AT91_UDP_FRM_NUM) & AT91_UDP_NUM;
}
static int at91_wakeup(struct usb_gadget *gadget)
@@ -833,11 +824,11 @@
/* NOTE: some "early versions" handle ESR differently ... */
- glbstate = at91_udp_read(AT91_UDP_GLB_STAT);
+ glbstate = at91_udp_read(udc, AT91_UDP_GLB_STAT);
if (!(glbstate & AT91_UDP_ESR))
goto done;
glbstate |= AT91_UDP_ESR;
- at91_udp_write(AT91_UDP_GLB_STAT, glbstate);
+ at91_udp_write(udc, AT91_UDP_GLB_STAT, glbstate);
done:
local_irq_restore(flags);
@@ -861,6 +852,7 @@
ep->stopped = 0;
ep->fifo_bank = 0;
ep->ep.maxpacket = ep->maxpacket;
+ ep->creg = (void __iomem *) udc->udp_baseaddr + AT91_UDP_CSR(i);
// initialiser une queue par endpoint
INIT_LIST_HEAD(&ep->queue);
}
@@ -915,14 +907,41 @@
if (!udc->enabled || !udc->vbus)
is_on = 0;
DBG("%sactive\n", is_on ? "" : "in");
+
if (is_on) {
clk_on(udc);
- at91_udp_write(AT91_UDP_TXVC, 0);
- at91_set_gpio_value(udc->board.pullup_pin, 1);
- } else {
+ at91_udp_write(udc, AT91_UDP_TXVC, 0);
+ if (cpu_is_at91rm9200())
+ at91_set_gpio_value(udc->board.pullup_pin, 1);
+ else if (cpu_is_at91sam9260()) {
+ u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
+
+ txvc |= AT91_UDP_TXVC_PUON;
+ at91_udp_write(udc, AT91_UDP_TXVC, txvc);
+ } else if (cpu_is_at91sam9261()) {
+ u32 usbpucr;
+
+ usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
+ usbpucr |= AT91_MATRIX_USBPUCR_PUON;
+ at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr);
+ }
+ } else {
stop_activity(udc);
- at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
- at91_set_gpio_value(udc->board.pullup_pin, 0);
+ at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
+ if (cpu_is_at91rm9200())
+ at91_set_gpio_value(udc->board.pullup_pin, 0);
+ else if (cpu_is_at91sam9260()) {
+ u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
+
+ txvc &= ~AT91_UDP_TXVC_PUON;
+ at91_udp_write(udc, AT91_UDP_TXVC, txvc);
+ } else if (cpu_is_at91sam9261()) {
+ u32 usbpucr;
+
+ usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
+ usbpucr &= ~AT91_MATRIX_USBPUCR_PUON;
+ at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr);
+ }
clk_off(udc);
}
}
@@ -936,7 +955,10 @@
// VDBG("vbus %s\n", is_active ? "on" : "off");
local_irq_save(flags);
udc->vbus = (is_active != 0);
- pullup(udc, is_active);
+ if (udc->driver)
+ pullup(udc, is_active);
+ else
+ pullup(udc, 0);
local_irq_restore(flags);
return 0;
}
@@ -1086,7 +1108,7 @@
case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
| USB_REQ_SET_CONFIGURATION:
- tmp = at91_udp_read(AT91_UDP_GLB_STAT) & AT91_UDP_CONFG;
+ tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT) & AT91_UDP_CONFG;
if (pkt.r.wValue)
udc->wait_for_config_ack = (tmp == 0);
else
@@ -1103,7 +1125,7 @@
case ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
| USB_REQ_GET_STATUS:
tmp = (udc->selfpowered << USB_DEVICE_SELF_POWERED);
- if (at91_udp_read(AT91_UDP_GLB_STAT) & AT91_UDP_ESR)
+ if (at91_udp_read(udc, AT91_UDP_GLB_STAT) & AT91_UDP_ESR)
tmp |= (1 << USB_DEVICE_REMOTE_WAKEUP);
PACKET("get device status\n");
__raw_writeb(tmp, dreg);
@@ -1114,17 +1136,17 @@
| USB_REQ_SET_FEATURE:
if (w_value != USB_DEVICE_REMOTE_WAKEUP)
goto stall;
- tmp = at91_udp_read(AT91_UDP_GLB_STAT);
+ tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
tmp |= AT91_UDP_ESR;
- at91_udp_write(AT91_UDP_GLB_STAT, tmp);
+ at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
goto succeed;
case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
| USB_REQ_CLEAR_FEATURE:
if (w_value != USB_DEVICE_REMOTE_WAKEUP)
goto stall;
- tmp = at91_udp_read(AT91_UDP_GLB_STAT);
+ tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
tmp &= ~AT91_UDP_ESR;
- at91_udp_write(AT91_UDP_GLB_STAT, tmp);
+ at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
goto succeed;
/*
@@ -1206,8 +1228,8 @@
} else if (ep->is_in)
goto stall;
- at91_udp_write(AT91_UDP_RST_EP, ep->int_mask);
- at91_udp_write(AT91_UDP_RST_EP, 0);
+ at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+ at91_udp_write(udc, AT91_UDP_RST_EP, 0);
tmp = __raw_readl(ep->creg);
tmp |= CLR_FX;
tmp &= ~(SET_FX | AT91_UDP_FORCESTALL);
@@ -1222,7 +1244,10 @@
#undef w_length
/* pass request up to the gadget driver */
- status = udc->driver->setup(&udc->gadget, &pkt.r);
+ if (udc->driver)
+ status = udc->driver->setup(&udc->gadget, &pkt.r);
+ else
+ status = -ENODEV;
if (status < 0) {
stall:
VDBG("req %02x.%02x protocol STALL; stat %d\n",
@@ -1300,13 +1325,13 @@
if (udc->wait_for_addr_ack) {
u32 tmp;
- at91_udp_write(AT91_UDP_FADDR,
+ at91_udp_write(udc, AT91_UDP_FADDR,
AT91_UDP_FEN | udc->addr);
- tmp = at91_udp_read(AT91_UDP_GLB_STAT);
+ tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
tmp &= ~AT91_UDP_FADDEN;
if (udc->addr)
tmp |= AT91_UDP_FADDEN;
- at91_udp_write(AT91_UDP_GLB_STAT, tmp);
+ at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
udc->wait_for_addr_ack = 0;
VDBG("address %d\n", udc->addr);
@@ -1374,28 +1399,28 @@
while (rescans--) {
u32 status;
- status = at91_udp_read(AT91_UDP_ISR)
- & at91_udp_read(AT91_UDP_IMR);
+ status = at91_udp_read(udc, AT91_UDP_ISR)
+ & at91_udp_read(udc, AT91_UDP_IMR);
if (!status)
break;
/* USB reset irq: not maskable */
if (status & AT91_UDP_ENDBUSRES) {
- at91_udp_write(AT91_UDP_IDR, ~MINIMUS_INTERRUPTUS);
- at91_udp_write(AT91_UDP_IER, MINIMUS_INTERRUPTUS);
+ at91_udp_write(udc, AT91_UDP_IDR, ~MINIMUS_INTERRUPTUS);
+ at91_udp_write(udc, AT91_UDP_IER, MINIMUS_INTERRUPTUS);
/* Atmel code clears this irq twice */
- at91_udp_write(AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
- at91_udp_write(AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
+ at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
+ at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
VDBG("end bus reset\n");
udc->addr = 0;
stop_activity(udc);
/* enable ep0 */
- at91_udp_write(AT91_UDP_CSR(0),
+ at91_udp_write(udc, AT91_UDP_CSR(0),
AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL);
udc->gadget.speed = USB_SPEED_FULL;
udc->suspended = 0;
- at91_udp_write(AT91_UDP_IER, AT91_UDP_EP(0));
+ at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_EP(0));
/*
* NOTE: this driver keeps clocks off unless the
@@ -1406,9 +1431,9 @@
/* host initiated suspend (3+ms bus idle) */
} else if (status & AT91_UDP_RXSUSP) {
- at91_udp_write(AT91_UDP_IDR, AT91_UDP_RXSUSP);
- at91_udp_write(AT91_UDP_IER, AT91_UDP_RXRSM);
- at91_udp_write(AT91_UDP_ICR, AT91_UDP_RXSUSP);
+ at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXSUSP);
+ at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXRSM);
+ at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXSUSP);
// VDBG("bus suspend\n");
if (udc->suspended)
continue;
@@ -1425,9 +1450,9 @@
/* host initiated resume */
} else if (status & AT91_UDP_RXRSM) {
- at91_udp_write(AT91_UDP_IDR, AT91_UDP_RXRSM);
- at91_udp_write(AT91_UDP_IER, AT91_UDP_RXSUSP);
- at91_udp_write(AT91_UDP_ICR, AT91_UDP_RXRSM);
+ at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXRSM);
+ at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXSUSP);
+ at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXRSM);
// VDBG("bus resume\n");
if (!udc->suspended)
continue;
@@ -1485,8 +1510,6 @@
},
.udc = &controller,
.maxpacket = 8,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP
- + AT91_UDP_CSR(0)),
.int_mask = 1 << 0,
},
.ep[1] = {
@@ -1497,8 +1520,6 @@
.udc = &controller,
.is_pingpong = 1,
.maxpacket = 64,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP
- + AT91_UDP_CSR(1)),
.int_mask = 1 << 1,
},
.ep[2] = {
@@ -1509,8 +1530,6 @@
.udc = &controller,
.is_pingpong = 1,
.maxpacket = 64,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP
- + AT91_UDP_CSR(2)),
.int_mask = 1 << 2,
},
.ep[3] = {
@@ -1521,8 +1540,6 @@
},
.udc = &controller,
.maxpacket = 8,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP
- + AT91_UDP_CSR(3)),
.int_mask = 1 << 3,
},
.ep[4] = {
@@ -1533,8 +1550,6 @@
.udc = &controller,
.is_pingpong = 1,
.maxpacket = 256,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP
- + AT91_UDP_CSR(4)),
.int_mask = 1 << 4,
},
.ep[5] = {
@@ -1545,8 +1560,6 @@
.udc = &controller,
.is_pingpong = 1,
.maxpacket = 256,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP
- + AT91_UDP_CSR(5)),
.int_mask = 1 << 5,
},
/* ep6 and ep7 are also reserved (custom silicon might use them) */
@@ -1572,9 +1585,8 @@
int retval;
if (!driver
- || driver->speed != USB_SPEED_FULL
+ || driver->speed < USB_SPEED_FULL
|| !driver->bind
- || !driver->unbind
|| !driver->setup) {
DBG("bad parameter.\n");
return -EINVAL;
@@ -1595,6 +1607,10 @@
if (retval) {
DBG("driver->bind() returned %d\n", retval);
udc->driver = NULL;
+ udc->gadget.dev.driver = NULL;
+ udc->gadget.dev.driver_data = NULL;
+ udc->enabled = 0;
+ udc->selfpowered = 0;
return retval;
}
@@ -1611,12 +1627,12 @@
{
struct at91_udc *udc = &controller;
- if (!driver || driver != udc->driver)
+ if (!driver || driver != udc->driver || !driver->unbind)
return -EINVAL;
local_irq_disable();
udc->enabled = 0;
- at91_udp_write(AT91_UDP_IDR, ~0);
+ at91_udp_write(udc, AT91_UDP_IDR, ~0);
pullup(udc, 0);
local_irq_enable();
@@ -1641,6 +1657,7 @@
struct device *dev = &pdev->dev;
struct at91_udc *udc;
int retval;
+ struct resource *res;
if (!dev->platform_data) {
/* small (so we copy it) but critical! */
@@ -1658,7 +1675,13 @@
return -ENODEV;
}
- if (!request_mem_region(AT91RM9200_BASE_UDP, SZ_16K, driver_name)) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENXIO;
+
+ if (!request_mem_region(res->start,
+ res->end - res->start + 1,
+ driver_name)) {
DBG("someone's using UDC memory\n");
return -EBUSY;
}
@@ -1668,15 +1691,23 @@
udc->gadget.dev.parent = dev;
udc->board = *(struct at91_udc_data *) dev->platform_data;
udc->pdev = pdev;
- udc_reinit(udc);
udc->enabled = 0;
+ udc->udp_baseaddr = ioremap(res->start, res->end - res->start + 1);
+ if (!udc->udp_baseaddr) {
+ release_mem_region(res->start, res->end - res->start + 1);
+ return -ENOMEM;
+ }
+
+ udc_reinit(udc);
+
/* get interface and function clocks */
udc->iclk = clk_get(dev, "udc_clk");
udc->fclk = clk_get(dev, "udpck");
if (IS_ERR(udc->iclk) || IS_ERR(udc->fclk)) {
DBG("clocks missing\n");
- return -ENODEV;
+ retval = -ENODEV;
+ goto fail0;
}
retval = device_register(&udc->gadget.dev);
@@ -1685,8 +1716,10 @@
/* don't do anything until we have both gadget driver and VBUS */
clk_enable(udc->iclk);
- at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
- at91_udp_write(AT91_UDP_IDR, 0xffffffff);
+ at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
+ at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff);
+ /* Clear all pending interrupts - UDP may be used by bootloader. */
+ at91_udp_write(udc, AT91_UDP_ICR, 0xffffffff);
clk_disable(udc->iclk);
/* request UDC and maybe VBUS irqs */
@@ -1698,6 +1731,11 @@
goto fail1;
}
if (udc->board.vbus_pin > 0) {
+ /*
+ * Get the initial state of VBUS - we cannot expect
+ * a pending interrupt.
+ */
+ udc->vbus = at91_get_gpio_value(udc->board.vbus_pin);
if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
IRQF_DISABLED, driver_name, udc)) {
DBG("request vbus irq %d failed\n",
@@ -1720,7 +1758,7 @@
fail1:
device_unregister(&udc->gadget.dev);
fail0:
- release_mem_region(AT91RM9200_BASE_UDP, SZ_16K);
+ release_mem_region(res->start, res->end - res->start + 1);
DBG("%s probe failed, %d\n", driver_name, retval);
return retval;
}
@@ -1728,13 +1766,14 @@
static int __devexit at91udc_remove(struct platform_device *pdev)
{
struct at91_udc *udc = platform_get_drvdata(pdev);
+ struct resource *res;
DBG("remove\n");
- pullup(udc, 0);
+ if (udc->driver)
+ return -EBUSY;
- if (udc->driver != 0)
- usb_gadget_unregister_driver(udc->driver);
+ pullup(udc, 0);
device_init_wakeup(&pdev->dev, 0);
remove_debug_file(udc);
@@ -1742,7 +1781,10 @@
free_irq(udc->board.vbus_pin, udc);
free_irq(udc->udp_irq, udc);
device_unregister(&udc->gadget.dev);
- release_mem_region(AT91RM9200_BASE_UDP, SZ_16K);
+
+ iounmap(udc->udp_baseaddr);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, res->end - res->start + 1);
clk_put(udc->iclk);
clk_put(udc->fclk);
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index 882af42..677089b 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -51,10 +51,10 @@
#define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */
#define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */
#define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */
-#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status */
+#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status [AT91RM9200 only] */
#define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */
#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrpt Status */
-#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status */
+#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status [AT91RM9200 only] */
#define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */
#define AT91_UDP_RST_EP 0x28 /* Reset Endpoint Register */
@@ -84,7 +84,7 @@
#define AT91_UDP_TXVC 0x74 /* Transceiver Control Register */
#define AT91_UDP_TXVC_TXVDIS (1 << 8) /* Transceiver Disable */
-
+#define AT91_UDP_TXVC_PUON (1 << 9) /* PullUp On [AT91SAM9260 only] */
/*-------------------------------------------------------------------------*/
@@ -141,6 +141,7 @@
struct clk *iclk, *fclk;
struct platform_device *pdev;
struct proc_dir_entry *pde;
+ void __iomem *udp_baseaddr;
int udp_irq;
};
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index f1f32d7..3c2bc07 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -779,7 +779,7 @@
return -EINVAL;
if (dum->driver)
return -EBUSY;
- if (!driver->bind || !driver->unbind || !driver->setup
+ if (!driver->bind || !driver->setup
|| driver->speed == USB_SPEED_UNKNOWN)
return -EINVAL;
@@ -837,7 +837,8 @@
err_bind_driver:
driver_unregister (&driver->driver);
err_register:
- driver->unbind (&dum->gadget);
+ if (driver->unbind)
+ driver->unbind (&dum->gadget);
spin_lock_irq (&dum->lock);
dum->pullup = 0;
set_link_state (dum);
@@ -857,7 +858,7 @@
if (!dum)
return -ENODEV;
- if (!driver || driver != dum->driver)
+ if (!driver || driver != dum->driver || !driver->unbind)
return -EINVAL;
dev_dbg (udc_dev(dum), "unregister gadget driver '%s'\n",
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index a265e26..72f2ae9 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -4100,7 +4100,7 @@
#endif
.function = (char *) longname,
.bind = fsg_bind,
- .unbind = __exit_p(fsg_unbind),
+ .unbind = fsg_unbind,
.disconnect = fsg_disconnect,
.setup = fsg_setup,
.suspend = fsg_suspend,
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 3135182..f1a67965 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -123,7 +123,7 @@
struct usb_request *req; /* for control responses */
u8 config;
struct usb_ep *in_ep, *out_ep;
- struct snd_card *card;
+ struct snd_card *card;
struct snd_rawmidi *rmidi;
struct snd_rawmidi_substream *in_substream;
struct snd_rawmidi_substream *out_substream;
@@ -490,7 +490,7 @@
int status = req->status;
switch (status) {
- case 0: /* normal completion */
+ case 0: /* normal completion */
if (ep == dev->out_ep) {
/* we received stuff.
req is queued again, below */
@@ -505,7 +505,7 @@
break;
/* this endpoint is normally active while we're configured */
- case -ECONNABORTED: /* hardware forced ep reset */
+ case -ECONNABORTED: /* hardware forced ep reset */
case -ECONNRESET: /* request dequeued */
case -ESHUTDOWN: /* disconnect from host */
VDBG(dev, "%s gone (%d), %d/%d\n", ep->name, status,
@@ -656,7 +656,7 @@
case USB_SPEED_LOW: speed = "low"; break;
case USB_SPEED_FULL: speed = "full"; break;
case USB_SPEED_HIGH: speed = "high"; break;
- default: speed = "?"; break;
+ default: speed = "?"; break;
}
dev->config = number;
@@ -1308,7 +1308,7 @@
.speed = USB_SPEED_FULL,
.function = (char *)longname,
.bind = gmidi_bind,
- .unbind = __exit_p(gmidi_unbind),
+ .unbind = gmidi_unbind,
.setup = gmidi_setup,
.disconnect = gmidi_disconnect,
@@ -1316,7 +1316,7 @@
.suspend = gmidi_suspend,
.resume = gmidi_resume,
- .driver = {
+ .driver = {
.name = (char *)shortname,
.owner = THIS_MODULE,
},
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index 805a982..d0ef1d6 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -1432,7 +1432,6 @@
if (!driver
|| driver->speed != USB_SPEED_FULL
|| !driver->bind
- || !driver->unbind
|| !driver->disconnect
|| !driver->setup)
return -EINVAL;
@@ -1495,7 +1494,7 @@
if (!dev)
return -ENODEV;
- if (!driver || driver != dev->driver)
+ if (!driver || driver != dev->driver || !driver->unbind)
return -EINVAL;
spin_lock_irqsave(&dev->lock, flags);
@@ -1808,13 +1807,8 @@
struct goku_udc *dev = pci_get_drvdata(pdev);
DBG(dev, "%s\n", __FUNCTION__);
- /* start with the driver above us */
- if (dev->driver) {
- /* should have been done already by driver model core */
- WARN(dev, "pci remove, driver '%s' is still registered\n",
- dev->driver->driver.name);
- usb_gadget_unregister_driver(dev->driver);
- }
+
+ BUG_ON(dev->driver);
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
remove_proc_entry(proc_node_name, NULL);
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
index 4a99156..a0a73c0 100644
--- a/drivers/usb/gadget/lh7a40x_udc.c
+++ b/drivers/usb/gadget/lh7a40x_udc.c
@@ -422,9 +422,10 @@
DEBUG("%s: %s\n", __FUNCTION__, driver->driver.name);
if (!driver
- || driver->speed != USB_SPEED_FULL
- || !driver->bind
- || !driver->unbind || !driver->disconnect || !driver->setup)
+ || driver->speed != USB_SPEED_FULL
+ || !driver->bind
+ || !driver->disconnect
+ || !driver->setup)
return -EINVAL;
if (!dev)
return -ENODEV;
@@ -471,7 +472,7 @@
if (!dev)
return -ENODEV;
- if (!driver || driver != dev->driver)
+ if (!driver || driver != dev->driver || !driver->unbind)
return -EINVAL;
spin_lock_irqsave(&dev->lock, flags);
@@ -2125,9 +2126,11 @@
DEBUG("%s: %p\n", __FUNCTION__, pdev);
+ if (dev->driver)
+ return -EBUSY;
+
udc_disable(dev);
remove_proc_files();
- usb_gadget_unregister_driver(dev->driver);
free_irq(IRQ_USBINTR, dev);
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 3024c67..569eb8c 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -2020,7 +2020,6 @@
if (!driver
|| driver->speed != USB_SPEED_HIGH
|| !driver->bind
- || !driver->unbind
|| !driver->setup)
return -EINVAL;
if (!dev)
@@ -2107,7 +2106,7 @@
if (!dev)
return -ENODEV;
- if (!driver || driver != dev->driver)
+ if (!driver || driver != dev->driver || !driver->unbind)
return -EINVAL;
spin_lock_irqsave (&dev->lock, flags);
@@ -2803,13 +2802,7 @@
{
struct net2280 *dev = pci_get_drvdata (pdev);
- /* start with the driver above us */
- if (dev->driver) {
- /* should have been done already by driver model core */
- WARN (dev, "pci remove, driver '%s' is still registered\n",
- dev->driver->driver.name);
- usb_gadget_unregister_driver (dev->driver);
- }
+ BUG_ON(dev->driver);
/* then clean up the resources we allocated during probe() */
net2280_led_shutdown (dev);
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 030d87c..15d77c3 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -2043,7 +2043,6 @@
// FIXME if otg, check: driver->is_otg
|| driver->speed < USB_SPEED_FULL
|| !driver->bind
- || !driver->unbind
|| !driver->setup)
return -EINVAL;
@@ -2087,9 +2086,11 @@
status = otg_set_peripheral(udc->transceiver, &udc->gadget);
if (status < 0) {
ERR("can't bind to transceiver\n");
- driver->unbind (&udc->gadget);
- udc->gadget.dev.driver = NULL;
- udc->driver = NULL;
+ if (driver->unbind) {
+ driver->unbind (&udc->gadget);
+ udc->gadget.dev.driver = NULL;
+ udc->driver = NULL;
+ }
goto done;
}
} else {
@@ -2117,7 +2118,7 @@
if (!udc)
return -ENODEV;
- if (!driver || driver != udc->driver)
+ if (!driver || driver != udc->driver || !driver->unbind)
return -EINVAL;
if (machine_is_omap_innovator() || machine_is_omap_osk())
@@ -2870,6 +2871,8 @@
if (!udc)
return -ENODEV;
+ if (udc->driver)
+ return -EBUSY;
udc->done = &done;
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 1ed506e..b78de96 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -1623,7 +1623,6 @@
if (!driver
|| driver->speed < USB_SPEED_FULL
|| !driver->bind
- || !driver->unbind
|| !driver->disconnect
|| !driver->setup)
return -EINVAL;
@@ -1694,7 +1693,7 @@
if (!dev)
return -ENODEV;
- if (!driver || driver != dev->driver)
+ if (!driver || driver != dev->driver || !driver->unbind)
return -EINVAL;
local_irq_disable();
@@ -2638,9 +2637,11 @@
{
struct pxa2xx_udc *dev = platform_get_drvdata(pdev);
+ if (dev->driver)
+ return -EBUSY;
+
udc_disable(dev);
remove_proc_files();
- usb_gadget_unregister_driver(dev->driver);
if (dev->got_irq) {
free_irq(IRQ_USB, dev);
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 2d12bf9..f8a3ec6 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -296,7 +296,7 @@
#endif /* CONFIG_USB_GADGET_DUALSPEED */
.function = GS_LONG_NAME,
.bind = gs_bind,
- .unbind = __exit_p(gs_unbind),
+ .unbind = gs_unbind,
.setup = gs_setup,
.disconnect = gs_disconnect,
.driver = {
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index b466581..cc40551 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -187,7 +187,6 @@
{
struct at91_usbh_data *board = hcd->self.controller->platform_data;
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- struct usb_device *root = hcd->self.root_hub;
int ret;
if ((ret = ohci_init(ohci)) < 0)
@@ -221,7 +220,7 @@
*/
.start = ohci_at91_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 24e23c5..e70b243 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -269,7 +269,7 @@
*/
.start = ohci_au1xxx_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -336,7 +336,7 @@
static struct platform_driver ohci_hcd_au1xxx_driver = {
.probe = ohci_hcd_au1xxx_drv_probe,
.remove = ohci_hcd_au1xxx_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
/*.suspend = ohci_hcd_au1xxx_drv_suspend, */
/*.resume = ohci_hcd_au1xxx_drv_resume, */
.driver = {
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 0f47a57..273d5dd 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -16,7 +16,7 @@
case PIPE_CONTROL: temp = "ctrl"; break; \
case PIPE_BULK: temp = "bulk"; break; \
case PIPE_INTERRUPT: temp = "intr"; break; \
- default: temp = "isoc"; break; \
+ default: temp = "isoc"; break; \
}; temp;})
#define pipestring(pipe) edstring(usb_pipetype(pipe))
@@ -205,13 +205,13 @@
(temp & RH_PS_PSSC) ? " PSSC" : "", \
(temp & RH_PS_PESC) ? " PESC" : "", \
(temp & RH_PS_CSC) ? " CSC" : "", \
- \
+ \
(temp & RH_PS_LSDA) ? " LSDA" : "", \
(temp & RH_PS_PPS) ? " PPS" : "", \
(temp & RH_PS_PRS) ? " PRS" : "", \
(temp & RH_PS_POCI) ? " POCI" : "", \
(temp & RH_PS_PSS) ? " PSS" : "", \
- \
+ \
(temp & RH_PS_PES) ? " PES" : "", \
(temp & RH_PS_CCS) ? " CCS" : "" \
);
@@ -563,7 +563,7 @@
(info & ED_SKIP) ? " K" : "",
(ed->hwHeadP &
cpu_to_hc32(ohci, ED_H)) ?
- " H" : "");
+ " H" : "");
size -= temp;
next += temp;
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index 1bf5e7a..43ae696 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -204,7 +204,7 @@
static struct platform_driver ohci_hcd_ep93xx_driver = {
.probe = ohci_hcd_ep93xx_drv_probe,
.remove = ohci_hcd_ep93xx_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
.suspend = ohci_hcd_ep93xx_drv_suspend,
.resume = ohci_hcd_ep93xx_drv_resume,
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index b28a9b6..c1c1d87 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -3,77 +3,21 @@
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* [ Initialisation is based on Linus' ]
* [ uhci code and gregs ohci fragments ]
* [ (C) Copyright 1999 Linus Torvalds ]
* [ (C) Copyright 1999 Gregory P. Smith]
- *
- *
+ *
+ *
* OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller
* interfaces (though some non-x86 Intel chips use it). It supports
* smarter hardware than UHCI. A download link for the spec available
* through the http://www.usb.org website.
*
- * History:
- *
- * 2004/03/24 LH7A404 support (Durgesh Pattamatta & Marc Singer)
- * 2004/02/04 use generic dma_* functions instead of pci_* (dsaxena@plexity.net)
- * 2003/02/24 show registers in sysfs (Kevin Brosius)
- *
- * 2002/09/03 get rid of ed hashtables, rework periodic scheduling and
- * bandwidth accounting; if debugging, show schedules in driverfs
- * 2002/07/19 fixes to management of ED and schedule state.
- * 2002/06/09 SA-1111 support (Christopher Hoover)
- * 2002/06/01 remember frame when HC won't see EDs any more; use that info
- * to fix urb unlink races caused by interrupt latency assumptions;
- * minor ED field and function naming updates
- * 2002/01/18 package as a patch for 2.5.3; this should match the
- * 2.4.17 kernel modulo some bugs being fixed.
- *
- * 2001/10/18 merge pmac cleanup (Benjamin Herrenschmidt) and bugfixes
- * from post-2.4.5 patches.
- * 2001/09/20 URB_ZERO_PACKET support; hcca_dma portability, OPTi warning
- * 2001/09/07 match PCI PM changes, errnos from Linus' tree
- * 2001/05/05 fork 2.4.5 version into "hcd" framework, cleanup, simplify;
- * pbook pci quirks gone (please fix pbook pci sw!) (db)
- *
- * 2001/04/08 Identify version on module load (gb)
- * 2001/03/24 td/ed hashing to remove bus_to_virt (Steve Longerbeam);
- pci_map_single (db)
- * 2001/03/21 td and dev/ed allocation uses new pci_pool API (db)
- * 2001/03/07 hcca allocation uses pci_alloc_consistent (Steve Longerbeam)
- *
- * 2000/09/26 fixed races in removing the private portion of the urb
- * 2000/09/07 disable bulk and control lists when unlinking the last
- * endpoint descriptor in order to avoid unrecoverable errors on
- * the Lucent chips. (rwc@sgi)
- * 2000/08/29 use bandwidth claiming hooks (thanks Randy!), fix some
- * urb unlink probs, indentation fixes
- * 2000/08/11 various oops fixes mostly affecting iso and cleanup from
- * device unplugs.
- * 2000/06/28 use PCI hotplug framework, for better power management
- * and for Cardbus support (David Brownell)
- * 2000/earlier: fixes for NEC/Lucent chips; suspend/resume handling
- * when the controller loses power; handle UE; cleanup; ...
- *
- * v5.2 1999/12/07 URB 3rd preview,
- * v5.1 1999/11/30 URB 2nd preview, cpia, (usb-scsi)
- * v5.0 1999/11/22 URB Technical preview, Paul Mackerras powerbook susp/resume
- * i386: HUB, Keyboard, Mouse, Printer
- *
- * v4.3 1999/10/27 multiple HCs, bulk_request
- * v4.2 1999/09/05 ISO API alpha, new dev alloc, neg Error-codes
- * v4.1 1999/08/27 Randy Dunlap's - ISO API first impl.
- * v4.0 1999/08/18
- * v3.0 1999/06/25
- * v2.1 1999/05/09 code clean up
- * v2.0 1999/05/04
- * v1.0 1999/04/27 initial release
- *
* This file is licenced under the GPL.
*/
-
+
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
@@ -89,7 +33,7 @@
#include <linux/list.h>
#include <linux/usb.h>
#include <linux/usb/otg.h>
-#include <linux/dma-mapping.h>
+#include <linux/dma-mapping.h>
#include <linux/dmapool.h>
#include <linux/reboot.h>
@@ -183,11 +127,11 @@
int i, size = 0;
unsigned long flags;
int retval = 0;
-
+
#ifdef OHCI_VERBOSE_DEBUG
urb_print (urb, "SUB", usb_pipein (pipe));
#endif
-
+
/* every endpoint has a ed, locate and maybe (re)initialize it */
if (! (ed = ed_get (ohci, ep, urb->dev, pipe, urb->interval)))
return -ENOMEM;
@@ -232,7 +176,7 @@
memset (urb_priv, 0, sizeof (urb_priv_t) + size * sizeof (struct td *));
INIT_LIST_HEAD (&urb_priv->pending);
urb_priv->length = size;
- urb_priv->ed = ed;
+ urb_priv->ed = ed;
/* allocate the TDs (deferring hash chain updates) */
for (i = 0; i < size; i++) {
@@ -242,7 +186,7 @@
urb_free_priv (ohci, urb_priv);
return -ENOMEM;
}
- }
+ }
spin_lock_irqsave (&ohci->lock, flags);
@@ -313,13 +257,13 @@
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
unsigned long flags;
-
+
#ifdef OHCI_VERBOSE_DEBUG
urb_print (urb, "UNLINK", 1);
-#endif
+#endif
spin_lock_irqsave (&ohci->lock, flags);
- if (HC_IS_RUNNING(hcd->state)) {
+ if (HC_IS_RUNNING(hcd->state)) {
urb_priv_t *urb_priv;
/* Unless an IRQ completed the unlink while it was being
@@ -512,11 +456,11 @@
/* Start an OHCI controller, set the BUS operational
* resets USB and controller
- * enable interrupts
+ * enable interrupts
*/
static int ohci_run (struct ohci_hcd *ohci)
{
- u32 mask, temp;
+ u32 mask, temp;
int first = ohci->fminterval == 0;
struct usb_hcd *hcd = ohci_to_hcd(ohci);
@@ -534,7 +478,7 @@
/* also: power/overcurrent flags in roothub.a */
}
- /* Reset USB nearly "by the book". RemoteWakeupConnected was
+ /* Reset USB nearly "by the book". RemoteWakeupConnected was
* saved if boot firmware (BIOS/SMM/...) told us it's connected,
* or if bus glue did the same (e.g. for PCI add-in cards with
* PCI PM support).
@@ -765,9 +709,9 @@
dl_done_list (ohci);
spin_unlock (&ohci->lock);
if (HC_IS_RUNNING(hcd->state))
- ohci_writel (ohci, OHCI_INTR_WDH, ®s->intrenable);
+ ohci_writel (ohci, OHCI_INTR_WDH, ®s->intrenable);
}
-
+
/* could track INTR_SO to reduce available PCI/... bandwidth */
/* handle any pending URB/ED unlinks, leaving INTR_SF enabled
@@ -778,12 +722,12 @@
finish_unlinks (ohci, ohci_frame_no(ohci));
if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list
&& HC_IS_RUNNING(hcd->state))
- ohci_writel (ohci, OHCI_INTR_SF, ®s->intrdisable);
+ ohci_writel (ohci, OHCI_INTR_SF, ®s->intrdisable);
spin_unlock (&ohci->lock);
if (HC_IS_RUNNING(hcd->state)) {
ohci_writel (ohci, ints, ®s->intrstatus);
- ohci_writel (ohci, OHCI_INTR_MIE, ®s->intrenable);
+ ohci_writel (ohci, OHCI_INTR_MIE, ®s->intrenable);
// flush those writes
(void) ohci_readl (ohci, &ohci->regs->control);
}
@@ -794,7 +738,7 @@
/*-------------------------------------------------------------------------*/
static void ohci_stop (struct usb_hcd *hcd)
-{
+{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
ohci_dbg (ohci, "stop %s controller (state 0x%02x)\n",
@@ -812,8 +756,8 @@
remove_debug_files (ohci);
ohci_mem_cleanup (ohci);
if (ohci->hcca) {
- dma_free_coherent (hcd->self.controller,
- sizeof *ohci->hcca,
+ dma_free_coherent (hcd->self.controller,
+ sizeof *ohci->hcca,
ohci->hcca, ohci->hcca_dma);
ohci->hcca = NULL;
ohci->hcca_dma = 0;
@@ -836,7 +780,7 @@
* recycle any "live" eds/tds (and urbs) right away.
* later, khubd disconnect processing will recycle the other state,
* (either as disconnect/reconnect, or maybe someday as a reset).
- */
+ */
spin_lock_irq(&ohci->lock);
disable (ohci);
usb_root_hub_lost_power(ohci_to_hcd(ohci)->self.root_hub);
@@ -875,11 +819,11 @@
/* empty the interrupt branches */
for (i = 0; i < NUM_INTS; i++) ohci->load [i] = 0;
for (i = 0; i < NUM_INTS; i++) ohci->hcca->int_table [i] = 0;
-
+
/* no EDs to remove */
ohci->ed_rm_list = NULL;
- /* empty control and bulk lists */
+ /* empty control and bulk lists */
ohci->ed_controltail = NULL;
ohci->ed_bulktail = NULL;
@@ -941,6 +885,10 @@
#include "ohci-au1xxx.c"
#endif
+#ifdef CONFIG_PNX8550
+#include "ohci-pnx8550.c"
+#endif
+
#ifdef CONFIG_USB_OHCI_HCD_PPC_SOC
#include "ohci-ppc-soc.c"
#endif
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 2441642..216c9c9 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -1,9 +1,9 @@
/*
* OHCI HCD (Host Controller Driver) for USB.
- *
+ *
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* This file is licenced under GPL
*/
@@ -23,13 +23,13 @@
(temp & RH_PS_PSSC) ? " PSSC" : "", \
(temp & RH_PS_PESC) ? " PESC" : "", \
(temp & RH_PS_CSC) ? " CSC" : "", \
- \
+ \
(temp & RH_PS_LSDA) ? " LSDA" : "", \
(temp & RH_PS_PPS) ? " PPS" : "", \
(temp & RH_PS_PRS) ? " PRS" : "", \
(temp & RH_PS_POCI) ? " POCI" : "", \
(temp & RH_PS_PSS) ? " PSS" : "", \
- \
+ \
(temp & RH_PS_PES) ? " PES" : "", \
(temp & RH_PS_CCS) ? " CCS" : "" \
);
@@ -484,7 +484,7 @@
temp = 0;
if (rh & RH_A_NPS) /* no power switching? */
temp |= 0x0002;
- if (rh & RH_A_PSM) /* per-port power switching? */
+ if (rh & RH_A_PSM) /* per-port power switching? */
temp |= 0x0001;
if (rh & RH_A_NOCP) /* no overcurrent reporting? */
temp |= 0x0010;
@@ -555,7 +555,7 @@
#define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)
/* called from some task, normally khubd */
-static inline void root_port_reset (struct ohci_hcd *ohci, unsigned port)
+static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port)
{
__hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port];
u32 temp;
@@ -570,10 +570,13 @@
/* spin until any current reset finishes */
for (;;) {
temp = ohci_readl (ohci, portstat);
+ /* handle e.g. CardBus eject */
+ if (temp == ~(u32)0)
+ return -ESHUTDOWN;
if (!(temp & RH_PS_PRS))
break;
udelay (500);
- }
+ }
if (!(temp & RH_PS_CCS))
break;
@@ -586,6 +589,8 @@
now = ohci_readl(ohci, &ohci->regs->fmnumber);
} while (tick_before(now, reset_done));
/* caller synchronizes using PRSC */
+
+ return 0;
}
static int ohci_hub_control (
@@ -702,7 +707,7 @@
&ohci->regs->roothub.portstatus [wIndex]);
break;
case USB_PORT_FEAT_RESET:
- root_port_reset (ohci, wIndex);
+ retval = root_port_reset (ohci, wIndex);
break;
default:
goto error;
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
index e121d97..e9807cf 100644
--- a/drivers/usb/host/ohci-lh7a404.c
+++ b/drivers/usb/host/ohci-lh7a404.c
@@ -38,7 +38,7 @@
CSC_PWRCNT |= CSC_PWRCNT_USBH_EN; /* Enable clock */
udelay(1000);
USBH_CMDSTATUS = OHCI_HCR;
-
+
printk(KERN_DEBUG __FILE__
": Clock to USB host has been enabled \n");
}
@@ -89,7 +89,7 @@
retval = -EBUSY;
goto err1;
}
-
+
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
pr_debug("ioremap failed");
@@ -174,7 +174,7 @@
*/
.start = ohci_lh7a404_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -242,7 +242,7 @@
static struct platform_driver ohci_hcd_lh7a404_driver = {
.probe = ohci_hcd_lh7a404_drv_probe,
.remove = ohci_hcd_lh7a404_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
/*.suspend = ohci_hcd_lh7a404_drv_suspend, */
/*.resume = ohci_hcd_lh7a404_drv_resume, */
.driver = {
diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c
index d976614..2f20d3d 100644
--- a/drivers/usb/host/ohci-mem.c
+++ b/drivers/usb/host/ohci-mem.c
@@ -1,24 +1,24 @@
/*
* OHCI HCD (Host Controller Driver) for USB.
- *
+ *
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* This file is licenced under the GPL.
*/
/*-------------------------------------------------------------------------*/
/*
- * There's basically three types of memory:
+ * OHCI deals with three types of memory:
* - data used only by the HCD ... kmalloc is fine
* - async and periodic schedules, shared by HC and HCD ... these
* need to use dma_pool or dma_alloc_coherent
* - driver buffers, read/written by HC ... the hcd glue or the
* device driver provides us with dma addresses
*
- * There's also PCI "register" data, which is memory mapped.
- * No memory seen by this driver is pagable.
+ * There's also "register" data, which is memory mapped.
+ * No memory seen by this driver (or any HCD) may be paged out.
*/
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 9c02177..27be1f9 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -447,7 +447,7 @@
.reset = ohci_omap_init,
.start = ohci_omap_start,
.stop = ohci_omap_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -533,7 +533,7 @@
static struct platform_driver ohci_hcd_omap_driver = {
.probe = ohci_hcd_omap_drv_probe,
.remove = ohci_hcd_omap_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
.suspend = ohci_omap_suspend,
.resume = ohci_omap_resume,
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 8744185..596e0b4 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -3,17 +3,17 @@
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* [ Initialisation is based on Linus' ]
* [ uhci code and gregs ohci fragments ]
* [ (C) Copyright 1999 Linus Torvalds ]
* [ (C) Copyright 1999 Gregory P. Smith]
- *
+ *
* PCI Bus Glue
*
* This file is licenced under the GPL.
*/
-
+
#ifndef CONFIG_PCI
#error "This file is PCI bus glue. CONFIG_PCI must be defined."
#endif
@@ -83,7 +83,7 @@
pci_dev_put(b);
}
- /* Check for Compaq's ZFMicro chipset, which needs short
+ /* Check for Compaq's ZFMicro chipset, which needs short
* delays before control or bulk queues get re-activated
* in finish_unlinks()
*/
@@ -238,8 +238,8 @@
.shutdown = usb_hcd_pci_shutdown,
};
-
-static int __init ohci_hcd_pci_init (void)
+
+static int __init ohci_hcd_pci_init (void)
{
printk (KERN_DEBUG "%s: " DRIVER_INFO " (PCI)\n", hcd_name);
if (usb_disabled())
@@ -253,8 +253,8 @@
/*-------------------------------------------------------------------------*/
-static void __exit ohci_hcd_pci_cleanup (void)
-{
+static void __exit ohci_hcd_pci_cleanup (void)
+{
pci_unregister_driver (&ohci_pci_driver);
}
module_exit (ohci_hcd_pci_cleanup);
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index 7f26f9b..3a8cbfb 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -4,7 +4,7 @@
* driver for Philips PNX4008 USB Host
*
* Authors: Dmitry Chigirev <source@mvista.com>
- * Vitaly Wool <vitalywool@gmail.com>
+ * Vitaly Wool <vitalywool@gmail.com>
*
* register initialization is based on code examples provided by Philips
* Copyright (c) 2005 Koninklijke Philips Electronics N.V.
@@ -29,7 +29,7 @@
#include <asm/arch/irqs.h>
#include <asm/arch/gpio.h>
-#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
+#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
/* USB_CTRL bit defines */
#define USB_SLAVE_HCLK_EN (1 << 24)
diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c
new file mode 100644
index 0000000..6922b91b
--- /dev/null
+++ b/drivers/usb/host/ohci-pnx8550.c
@@ -0,0 +1,258 @@
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ * (C) Copyright 2005 Embedded Alley Solutions, Inc.
+ *
+ * Bus Glue for PNX8550
+ *
+ * Written by Christopher Hoover <ch@hpl.hp.com>
+ * Based on fragments of previous driver by Russell King et al.
+ *
+ * Modified for LH7A404 from ohci-sa1111.c
+ * by Durgesh Pattamatta <pattamattad@sharpsec.com>
+ *
+ * Modified for PNX8550 from ohci-sa1111.c and sa-omap.c
+ * by Vitaly Wool <vitalywool@gmail.com>
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/mach-pnx8550/usb.h>
+#include <asm/mach-pnx8550/int.h>
+#include <asm/mach-pnx8550/pci.h>
+
+#ifndef CONFIG_PNX8550
+#error "This file is PNX8550 bus glue. CONFIG_PNX8550 must be defined."
+#endif
+
+extern int usb_disabled(void);
+
+/*-------------------------------------------------------------------------*/
+
+static void pnx8550_start_hc(struct platform_device *dev)
+{
+ /*
+ * Set register CLK48CTL to enable and 48MHz
+ */
+ outl(0x00000003, PCI_BASE | 0x0004770c);
+
+ /*
+ * Set register CLK12CTL to enable and 48MHz
+ */
+ outl(0x00000003, PCI_BASE | 0x00047710);
+
+ udelay(100);
+}
+
+static void pnx8550_stop_hc(struct platform_device *dev)
+{
+ udelay(10);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* configure so an HC device and id are always provided */
+/* always called with process context; sleeping is OK */
+
+
+/**
+ * usb_hcd_pnx8550_probe - initialize pnx8550-based HCDs
+ * Context: !in_interrupt()
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ *
+ */
+int usb_hcd_pnx8550_probe (const struct hc_driver *driver,
+ struct platform_device *dev)
+{
+ int retval;
+ struct usb_hcd *hcd;
+
+ if (dev->resource[0].flags != IORESOURCE_MEM ||
+ dev->resource[1].flags != IORESOURCE_IRQ) {
+ dev_err (&dev->dev,"invalid resource type\n");
+ return -ENOMEM;
+ }
+
+ hcd = usb_create_hcd (driver, &dev->dev, "pnx8550");
+ if (!hcd)
+ return -ENOMEM;
+ hcd->rsrc_start = dev->resource[0].start;
+ hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+ dev_err(&dev->dev, "request_mem_region [0x%08llx, 0x%08llx] "
+ "failed\n", hcd->rsrc_start, hcd->rsrc_len);
+ retval = -EBUSY;
+ goto err1;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ dev_err(&dev->dev, "ioremap [[0x%08llx, 0x%08llx] failed\n",
+ hcd->rsrc_start, hcd->rsrc_len);
+ retval = -ENOMEM;
+ goto err2;
+ }
+
+ pnx8550_start_hc(dev);
+
+ ohci_hcd_init(hcd_to_ohci(hcd));
+
+ retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
+ if (retval == 0)
+ return retval;
+
+ pnx8550_stop_hc(dev);
+ iounmap(hcd->regs);
+ err2:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ err1:
+ usb_put_hcd(hcd);
+ return retval;
+}
+
+
+/* may be called without controller electrically present */
+/* may be called with controller, bus, and devices active */
+
+/**
+ * usb_hcd_pnx8550_remove - shutdown processing for pnx8550-based HCDs
+ * @dev: USB Host Controller being removed
+ * Context: !in_interrupt()
+ *
+ * Reverses the effect of usb_hcd_pnx8550_probe(), first invoking
+ * the HCD's stop() method. It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ *
+ */
+void usb_hcd_pnx8550_remove (struct usb_hcd *hcd, struct platform_device *dev)
+{
+ usb_remove_hcd(hcd);
+ pnx8550_stop_hc(dev);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int __devinit
+ohci_pnx8550_start (struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ int ret;
+
+ ohci_dbg (ohci, "ohci_pnx8550_start, ohci:%p", ohci);
+
+ if ((ret = ohci_init(ohci)) < 0)
+ return ret;
+
+ if ((ret = ohci_run (ohci)) < 0) {
+ err ("can't start %s", hcd->self.bus_name);
+ ohci_stop (hcd);
+ return ret;
+ }
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static const struct hc_driver ohci_pnx8550_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "PNX8550 OHCI",
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ohci_irq,
+ .flags = HCD_USB11 | HCD_MEMORY,
+
+ /*
+ * basic lifecycle operations
+ */
+ .start = ohci_pnx8550_start,
+ .stop = ohci_stop,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ohci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+ .start_port_reset = ohci_start_port_reset,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int ohci_hcd_pnx8550_drv_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ ret = usb_hcd_pnx8550_probe(&ohci_pnx8550_hc_driver, pdev);
+ return ret;
+}
+
+static int ohci_hcd_pnx8550_drv_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+ usb_hcd_pnx8550_remove(hcd, pdev);
+ return 0;
+}
+
+MODULE_ALIAS("pnx8550-ohci");
+
+static struct platform_driver ohci_hcd_pnx8550_driver = {
+ .driver = {
+ .name = "pnx8550-ohci",
+ },
+ .probe = ohci_hcd_pnx8550_drv_probe,
+ .remove = ohci_hcd_pnx8550_drv_remove,
+};
+
+static int __init ohci_hcd_pnx8550_init (void)
+{
+ pr_debug (DRIVER_INFO " (pnx8550)");
+ pr_debug ("block sizes: ed %d td %d\n",
+ sizeof (struct ed), sizeof (struct td));
+
+ return platform_driver_register(&ohci_hcd_pnx8550_driver);
+}
+
+static void __exit ohci_hcd_pnx8550_cleanup (void)
+{
+ platform_driver_unregister(&ohci_hcd_pnx8550_driver);
+}
+
+module_init (ohci_hcd_pnx8550_init);
+module_exit (ohci_hcd_pnx8550_cleanup);
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index d9d1ae2..e1a7eb8 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -5,7 +5,7 @@
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
* (C) Copyright 2002 Hewlett-Packard Company
* (C) Copyright 2003-2005 MontaVista Software Inc.
- *
+ *
* Bus Glue for PPC On-Chip OHCI driver
* Tested on Freescale MPC5200 and IBM STB04xxx
*
@@ -85,7 +85,7 @@
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
- usb_put_hcd(hcd);
+ usb_put_hcd(hcd);
return retval;
}
@@ -148,7 +148,7 @@
*/
.start = ohci_ppc_soc_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -197,7 +197,7 @@
static struct platform_driver ohci_hcd_ppc_soc_driver = {
.probe = ohci_hcd_ppc_soc_drv_probe,
.remove = ohci_hcd_ppc_soc_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
/*.suspend = ohci_hcd_ppc_soc_drv_suspend,*/
/*.resume = ohci_hcd_ppc_soc_drv_resume,*/
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index e176b04..3bbea84 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -47,7 +47,7 @@
switch ( mode ) {
case PMM_NPS_MODE:
UHCRHDA |= RH_A_NPS;
- break;
+ break;
case PMM_GLOBAL_MODE:
UHCRHDA &= ~(RH_A_NPS & RH_A_PSM);
break;
@@ -60,7 +60,7 @@
break;
default:
printk( KERN_ERR
- "Invalid mode %d, set to non-power switch mode.\n",
+ "Invalid mode %d, set to non-power switch mode.\n",
mode );
UHCRHDA |= RH_A_NPS;
@@ -270,7 +270,7 @@
*/
.start = ohci_pxa27x_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -359,9 +359,9 @@
static struct platform_driver ohci_hcd_pxa27x_driver = {
.probe = ohci_hcd_pxa27x_drv_probe,
.remove = ohci_hcd_pxa27x_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
- .suspend = ohci_hcd_pxa27x_drv_suspend,
+ .suspend = ohci_hcd_pxa27x_drv_suspend,
.resume = ohci_hcd_pxa27x_drv_resume,
#endif
.driver = {
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index fe1fe2f..830a3fe 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -1,9 +1,9 @@
/*
* OHCI HCD (Host Controller Driver) for USB.
- *
+ *
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* This file is licenced under the GPL.
*/
@@ -89,7 +89,7 @@
/*-------------------------------------------------------------------------*
* ED handling functions
- *-------------------------------------------------------------------------*/
+ *-------------------------------------------------------------------------*/
/* search for the right schedule branch to use for a periodic ed.
* does some load balancing; returns the branch, or negative errno.
@@ -107,7 +107,6 @@
*/
for (i = 0; i < interval ; i++) {
if (branch < 0 || ohci->load [branch] > ohci->load [i]) {
-#if 1 /* CONFIG_USB_BANDWIDTH */
int j;
/* usb 1.1 says 90% of one frame */
@@ -117,8 +116,7 @@
}
if (j < NUM_INTS)
continue;
-#endif
- branch = i;
+ branch = i;
}
}
return branch;
@@ -171,7 +169,7 @@
/* link an ed into one of the HC chains */
static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed)
-{
+{
int branch;
if (ohci_to_hcd(ohci)->state == HC_STATE_QUIESCING)
@@ -248,7 +246,7 @@
}
ed->branch = branch;
periodic_link (ohci, ed);
- }
+ }
/* the HC may not see the schedule updates yet, but if it does
* then they'll be properly ordered.
@@ -277,7 +275,7 @@
*prev = ed->ed_next;
}
ohci->load [i] -= ed->load;
- }
+ }
ohci_to_hcd(ohci)->self.bandwidth_allocated -= ed->load / ed->interval;
ohci_vdbg (ohci, "unlink %sed %p branch %d [%dus.], interval %d\n",
@@ -285,7 +283,7 @@
ed, ed->branch, ed->load, ed->interval);
}
-/* unlink an ed from one of the HC chains.
+/* unlink an ed from one of the HC chains.
* just the link to the ed is unlinked.
* the link from the ed still points to another operational ed or 0
* so the HC can eventually finish the processing of the unlinked ed
@@ -307,7 +305,7 @@
* When finish_unlinks() runs later, after SOF interrupt, it will often
* complete one or more URB unlinks before making that state change.
*/
-static void ed_deschedule (struct ohci_hcd *ohci, struct ed *ed)
+static void ed_deschedule (struct ohci_hcd *ohci, struct ed *ed)
{
ed->hwINFO |= cpu_to_hc32 (ohci, ED_SKIP);
wmb ();
@@ -397,7 +395,7 @@
unsigned int pipe,
int interval
) {
- struct ed *ed;
+ struct ed *ed;
unsigned long flags;
spin_lock_irqsave (&ohci->lock, flags);
@@ -413,9 +411,9 @@
goto done;
}
- /* dummy td; end of td list for ed */
+ /* dummy td; end of td list for ed */
td = td_alloc (ohci, GFP_ATOMIC);
- if (!td) {
+ if (!td) {
/* out of memory */
ed_free (ohci, ed);
ed = NULL;
@@ -462,7 +460,7 @@
done:
spin_unlock_irqrestore (&ohci->lock, flags);
- return ed;
+ return ed;
}
/*-------------------------------------------------------------------------*/
@@ -474,7 +472,7 @@
* and that ed->state is ED_OPER
*/
static void start_ed_unlink (struct ohci_hcd *ohci, struct ed *ed)
-{
+{
ed->hwINFO |= cpu_to_hc32 (ohci, ED_DEQUEUE);
ed_deschedule (ohci, ed);
@@ -541,7 +539,7 @@
td->ed = urb_priv->ed;
td->next_dl_td = NULL;
td->index = index;
- td->urb = urb;
+ td->urb = urb;
td->data_dma = data;
if (!len)
data = 0;
@@ -553,8 +551,8 @@
(data & 0x0FFF) | 0xE000);
td->ed->last_iso = info & 0xffff;
} else {
- td->hwCBP = cpu_to_hc32 (ohci, data);
- }
+ td->hwCBP = cpu_to_hc32 (ohci, data);
+ }
if (data)
td->hwBE = cpu_to_hc32 (ohci, data + len - 1);
else
@@ -597,7 +595,7 @@
* use the device toggle bits for resetting, and rely on the fact
* that resetting toggle is meaningless if the endpoint is active.
*/
- if (!usb_gettoggle (urb->dev, usb_pipeendpoint (urb->pipe), is_out)) {
+ if (!usb_gettoggle (urb->dev, usb_pipeendpoint (urb->pipe), is_out)) {
usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe),
is_out, 1);
urb_priv->ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_C);
@@ -721,16 +719,16 @@
list_del (&td->td_list);
/* ISO ... drivers see per-TD length/status */
- if (tdINFO & TD_ISO) {
- u16 tdPSW = ohci_hwPSW (ohci, td, 0);
+ if (tdINFO & TD_ISO) {
+ u16 tdPSW = ohci_hwPSW (ohci, td, 0);
int dlen = 0;
/* NOTE: assumes FC in tdINFO == 0, and that
* only the first of 0..MAXPSW psws is used.
*/
- cc = (tdPSW >> 12) & 0xF;
- if (tdINFO & TD_CC) /* hc didn't touch? */
+ cc = (tdPSW >> 12) & 0xF;
+ if (tdINFO & TD_CC) /* hc didn't touch? */
return;
if (usb_pipeout (urb->pipe))
@@ -758,7 +756,7 @@
int type = usb_pipetype (urb->pipe);
u32 tdBE = hc32_to_cpup (ohci, &td->hwBE);
- cc = TD_CC_GET (tdINFO);
+ cc = TD_CC_GET (tdINFO);
/* update packet status if needed (short is normally ok) */
if (cc == TD_DATAUNDERRUN
@@ -787,7 +785,7 @@
urb, td, 1 + td->index, cc,
urb->actual_length,
urb->transfer_buffer_length);
- }
+ }
}
/*-------------------------------------------------------------------------*/
@@ -795,7 +793,7 @@
static inline struct td *
ed_halted (struct ohci_hcd *ohci, struct td *td, int cc, struct td *rev)
{
- struct urb *urb = td->urb;
+ struct urb *urb = td->urb;
struct ed *ed = td->ed;
struct list_head *tmp = td->td_list.next;
__hc32 toggle = ed->hwHeadP & cpu_to_hc32 (ohci, ED_C);
@@ -805,7 +803,7 @@
*/
ed->hwINFO |= cpu_to_hc32 (ohci, ED_SKIP);
wmb ();
- ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_H);
+ ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_H);
/* put any later tds from this urb onto the donelist, after 'td',
* order won't matter here: no errors, and nothing was transferred.
@@ -833,7 +831,7 @@
info &= ~cpu_to_hc32 (ohci, TD_CC);
next->hwINFO = info;
- next->next_dl_td = rev;
+ next->next_dl_td = rev;
rev = next;
ed->hwHeadP = next->hwNextTD | toggle;
@@ -881,8 +879,8 @@
/* get TD from hc's singly linked list, and
* prepend to ours. ed->td_list changes later.
*/
- while (td_dma) {
- int cc;
+ while (td_dma) {
+ int cc;
td = dma_to_td (ohci, td_dma);
if (!td) {
@@ -901,10 +899,10 @@
&& (td->ed->hwHeadP & cpu_to_hc32 (ohci, ED_H)))
td_rev = ed_halted (ohci, td, cc, td_rev);
- td->next_dl_td = td_rev;
+ td->next_dl_td = td_rev;
td_rev = td;
td_dma = hc32_to_cpup (ohci, &td->hwNextTD);
- }
+ }
return td_rev;
}
@@ -1013,9 +1011,9 @@
if (modified)
goto rescan_all;
- }
+ }
- /* maybe reenable control and bulk lists */
+ /* maybe reenable control and bulk lists */
if (HC_IS_RUNNING(ohci_to_hcd(ohci)->state)
&& ohci_to_hcd(ohci)->state != HC_STATE_QUIESCING
&& !ohci->ed_rm_list) {
@@ -1041,20 +1039,20 @@
&ohci->regs->ed_bulkcurrent);
}
}
-
+
/* CLE/BLE to enable, CLF/BLF to (maybe) kickstart */
if (control) {
ohci->hc_control |= control;
if (ohci->flags & OHCI_QUIRK_ZFMICRO)
mdelay(1);
- ohci_writel (ohci, ohci->hc_control,
- &ohci->regs->control);
- }
+ ohci_writel (ohci, ohci->hc_control,
+ &ohci->regs->control);
+ }
if (command) {
if (ohci->flags & OHCI_QUIRK_ZFMICRO)
mdelay(1);
- ohci_writel (ohci, command, &ohci->regs->cmdstatus);
- }
+ ohci_writel (ohci, command, &ohci->regs->cmdstatus);
+ }
}
}
@@ -1074,19 +1072,19 @@
{
struct td *td = dl_reverse_done_list (ohci);
- while (td) {
+ while (td) {
struct td *td_next = td->next_dl_td;
struct urb *urb = td->urb;
urb_priv_t *urb_priv = urb->hcpriv;
struct ed *ed = td->ed;
/* update URB's length and status from TD */
- td_done (ohci, urb, td);
- urb_priv->td_cnt++;
+ td_done (ohci, urb, td);
+ urb_priv->td_cnt++;
/* If all this urb's TDs are done, call complete() */
- if (urb_priv->td_cnt == urb_priv->length)
- finish_urb (ohci, urb);
+ if (urb_priv->td_cnt == urb_priv->length)
+ finish_urb (ohci, urb);
/* clean schedule: unlink EDs that are no longer busy */
if (list_empty (&ed->td_list)) {
@@ -1094,25 +1092,26 @@
start_ed_unlink (ohci, ed);
/* ... reenabling halted EDs only after fault cleanup */
- } else if ((ed->hwINFO & cpu_to_hc32 (ohci, ED_SKIP | ED_DEQUEUE))
+ } else if ((ed->hwINFO & cpu_to_hc32 (ohci,
+ ED_SKIP | ED_DEQUEUE))
== cpu_to_hc32 (ohci, ED_SKIP)) {
td = list_entry (ed->td_list.next, struct td, td_list);
- if (!(td->hwINFO & cpu_to_hc32 (ohci, TD_DONE))) {
+ if (!(td->hwINFO & cpu_to_hc32 (ohci, TD_DONE))) {
ed->hwINFO &= ~cpu_to_hc32 (ohci, ED_SKIP);
/* ... hc may need waking-up */
switch (ed->type) {
case PIPE_CONTROL:
ohci_writel (ohci, OHCI_CLF,
- &ohci->regs->cmdstatus);
+ &ohci->regs->cmdstatus);
break;
case PIPE_BULK:
ohci_writel (ohci, OHCI_BLF,
- &ohci->regs->cmdstatus);
+ &ohci->regs->cmdstatus);
break;
}
}
}
- td = td_next;
- }
+ td = td_next;
+ }
}
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 59e4364..b350d45 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -447,7 +447,7 @@
*/
.start = ohci_s3c2410_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -492,7 +492,7 @@
static struct platform_driver ohci_hcd_s3c2410_driver = {
.probe = ohci_hcd_s3c2410_drv_probe,
.remove = ohci_hcd_s3c2410_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
/*.suspend = ohci_hcd_s3c2410_drv_suspend, */
/*.resume = ohci_hcd_s3c2410_drv_resume, */
.driver = {
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 71371de..fe0090e 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -4,7 +4,7 @@
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
* (C) Copyright 2002 Hewlett-Packard Company
- *
+ *
* SA1111 Bus Glue
*
* Written by Christopher Hoover <ch@hpl.hp.com>
@@ -12,7 +12,7 @@
*
* This file is licenced under the GPL.
*/
-
+
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/arch/assabet.h>
@@ -31,7 +31,7 @@
{
unsigned int usb_rst = 0;
- printk(KERN_DEBUG __FILE__
+ printk(KERN_DEBUG __FILE__
": starting SA-1111 OHCI USB Controller\n");
#ifdef CONFIG_SA1100_BADGE4
@@ -65,7 +65,7 @@
static void sa1111_stop_hc(struct sa1111_dev *dev)
{
unsigned int usb_rst;
- printk(KERN_DEBUG __FILE__
+ printk(KERN_DEBUG __FILE__
": stopping SA-1111 OHCI USB Controller\n");
/*
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index a2f42a2..405257f 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -1,9 +1,9 @@
/*
* OHCI HCD (Host Controller Driver) for USB.
- *
+ *
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* This file is licenced under the GPL.
*/
@@ -14,7 +14,7 @@
*/
typedef __u32 __bitwise __hc32;
typedef __u16 __bitwise __hc16;
-
+
/*
* OHCI Endpoint Descriptor (ED) ... holds TD queue
* See OHCI spec, section 4.2
@@ -24,7 +24,7 @@
*/
struct ed {
/* first fields are hardware-specified */
- __hc32 hwINFO; /* endpoint config bitmap */
+ __hc32 hwINFO; /* endpoint config bitmap */
/* info bits defined by hcd */
#define ED_DEQUEUE (1 << 27)
/* info bits defined by the hardware */
@@ -52,11 +52,11 @@
* usually: OPER --> UNLINK --> (IDLE | OPER) --> ...
*/
u8 state; /* ED_{IDLE,UNLINK,OPER} */
-#define ED_IDLE 0x00 /* NOT linked to HC */
-#define ED_UNLINK 0x01 /* being unlinked from hc */
+#define ED_IDLE 0x00 /* NOT linked to HC */
+#define ED_UNLINK 0x01 /* being unlinked from hc */
#define ED_OPER 0x02 /* IS linked to hc */
- u8 type; /* PIPE_{BULK,...} */
+ u8 type; /* PIPE_{BULK,...} */
/* periodic scheduling params (for intr and iso) */
u8 branch;
@@ -70,7 +70,7 @@
#define ED_MASK ((u32)~0x0f) /* strip hw status in low addr bits */
-
+
/*
* OHCI Transfer Descriptor (TD) ... one per transfer segment
* See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt)
@@ -107,22 +107,22 @@
/* (no hwINFO #defines yet for iso tds) */
- __hc32 hwCBP; /* Current Buffer Pointer (or 0) */
- __hc32 hwNextTD; /* Next TD Pointer */
- __hc32 hwBE; /* Memory Buffer End Pointer */
+ __hc32 hwCBP; /* Current Buffer Pointer (or 0) */
+ __hc32 hwNextTD; /* Next TD Pointer */
+ __hc32 hwBE; /* Memory Buffer End Pointer */
/* PSW is only for ISO. Only 1 PSW entry is used, but on
* big-endian PPC hardware that's the second entry.
*/
#define MAXPSW 2
- __hc16 hwPSW [MAXPSW];
+ __hc16 hwPSW [MAXPSW];
/* rest are purely for the driver's use */
- __u8 index;
- struct ed *ed;
- struct td *td_hash; /* dma-->td hashtable */
- struct td *next_dl_td;
- struct urb *urb;
+ __u8 index;
+ struct ed *ed;
+ struct td *td_hash; /* dma-->td hashtable */
+ struct td *next_dl_td;
+ struct urb *urb;
dma_addr_t td_dma; /* addr of this TD */
dma_addr_t data_dma; /* addr of data it points to */
@@ -152,8 +152,8 @@
#define TD_NOTACCESSED 0x0F
-/* map OHCI TD status codes (CC) to errno values */
-static const int cc_to_error [16] = {
+/* map OHCI TD status codes (CC) to errno values */
+static const int cc_to_error [16] = {
/* No Error */ 0,
/* CRC Error */ -EILSEQ,
/* Bit Stuff */ -EPROTO,
@@ -169,7 +169,7 @@
/* BufferOver */ -ECOMM,
/* BuffUnder */ -ENOSR,
/* (for HCD) */ -EALREADY,
- /* (for HCD) */ -EALREADY
+ /* (for HCD) */ -EALREADY
};
@@ -182,7 +182,7 @@
#define NUM_INTS 32
__hc32 int_table [NUM_INTS]; /* periodic schedule */
- /*
+ /*
* OHCI defines u16 frame_no, followed by u16 zero pad.
* Since some processors can't do 16 bit bus accesses,
* portable access must be a 32 bits wide.
@@ -262,10 +262,10 @@
* HcCommandStatus (cmdstatus) register masks
*/
#define OHCI_HCR (1 << 0) /* host controller reset */
-#define OHCI_CLF (1 << 1) /* control list filled */
-#define OHCI_BLF (1 << 2) /* bulk list filled */
-#define OHCI_OCR (1 << 3) /* ownership change request */
-#define OHCI_SOC (3 << 16) /* scheduling overrun count */
+#define OHCI_CLF (1 << 1) /* control list filled */
+#define OHCI_BLF (1 << 2) /* bulk list filled */
+#define OHCI_OCR (1 << 3) /* ownership change request */
+#define OHCI_SOC (3 << 16) /* scheduling overrun count */
/*
* masks used with interrupt registers:
@@ -285,20 +285,20 @@
/* OHCI ROOT HUB REGISTER MASKS */
-
+
/* roothub.portstatus [i] bits */
-#define RH_PS_CCS 0x00000001 /* current connect status */
-#define RH_PS_PES 0x00000002 /* port enable status*/
-#define RH_PS_PSS 0x00000004 /* port suspend status */
-#define RH_PS_POCI 0x00000008 /* port over current indicator */
-#define RH_PS_PRS 0x00000010 /* port reset status */
-#define RH_PS_PPS 0x00000100 /* port power status */
-#define RH_PS_LSDA 0x00000200 /* low speed device attached */
-#define RH_PS_CSC 0x00010000 /* connect status change */
-#define RH_PS_PESC 0x00020000 /* port enable status change */
-#define RH_PS_PSSC 0x00040000 /* port suspend status change */
-#define RH_PS_OCIC 0x00080000 /* over current indicator change */
-#define RH_PS_PRSC 0x00100000 /* port reset status change */
+#define RH_PS_CCS 0x00000001 /* current connect status */
+#define RH_PS_PES 0x00000002 /* port enable status*/
+#define RH_PS_PSS 0x00000004 /* port suspend status */
+#define RH_PS_POCI 0x00000008 /* port over current indicator */
+#define RH_PS_PRS 0x00000010 /* port reset status */
+#define RH_PS_PPS 0x00000100 /* port power status */
+#define RH_PS_LSDA 0x00000200 /* low speed device attached */
+#define RH_PS_CSC 0x00010000 /* connect status change */
+#define RH_PS_PESC 0x00020000 /* port enable status change */
+#define RH_PS_PSSC 0x00040000 /* port suspend status change */
+#define RH_PS_OCIC 0x00080000 /* over current indicator change */
+#define RH_PS_PRSC 0x00100000 /* port reset status change */
/* roothub.status bits */
#define RH_HS_LPS 0x00000001 /* local power status */
@@ -333,7 +333,7 @@
} urb_priv_t;
#define TD_HASH_SIZE 64 /* power'o'two */
-// sizeof (struct td) ~= 64 == 2^6 ...
+// sizeof (struct td) ~= 64 == 2^6 ...
#define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE)
@@ -364,11 +364,11 @@
struct ed *ed_bulktail; /* last in bulk list */
struct ed *ed_controltail; /* last in ctrl list */
- struct ed *periodic [NUM_INTS]; /* shadow int_table */
+ struct ed *periodic [NUM_INTS]; /* shadow int_table */
/*
* OTG controllers and transceivers need software interaction;
- * other external transceivers should be software-transparent
+ * other external transceivers should be software-transparent
*/
struct otg_transceiver *transceiver;
@@ -385,7 +385,7 @@
*/
int num_ports;
int load [NUM_INTS];
- u32 hc_control; /* copy of hc control reg */
+ u32 hc_control; /* copy of hc control reg */
unsigned long next_statechange; /* suspend/resume */
u32 fminterval; /* saved register */
unsigned autostop:1; /* rh auto stopping/stopped */
@@ -598,11 +598,11 @@
}
#define FI 0x2edf /* 12000 bits per frame (-1) */
-#define FSMP(fi) (0x7fff & ((6 * ((fi) - 210)) / 7))
+#define FSMP(fi) (0x7fff & ((6 * ((fi) - 210)) / 7))
#define FIT (1 << 31)
#define LSTHRESH 0x628 /* lowspeed bit threshold */
-static void periodic_reinit (struct ohci_hcd *ohci)
+static inline void periodic_reinit (struct ohci_hcd *ohci)
{
u32 fi = ohci->fminterval & 0x03fff;
u32 fit = ohci_readl(ohci, &ohci->regs->fminterval) & FIT;
@@ -626,11 +626,11 @@
temp = ohci_readl (hc, &hc->regs->roothub.register); \
temp; })
-static u32 roothub_a (struct ohci_hcd *hc)
+static inline u32 roothub_a (struct ohci_hcd *hc)
{ return read_roothub (hc, a, 0xfc0fe000); }
static inline u32 roothub_b (struct ohci_hcd *hc)
{ return ohci_readl (hc, &hc->regs->roothub.b); }
static inline u32 roothub_status (struct ohci_hcd *hc)
{ return ohci_readl (hc, &hc->regs->roothub.status); }
-static u32 roothub_portstatus (struct ohci_hcd *hc, int i)
+static inline u32 roothub_portstatus (struct ohci_hcd *hc, int i)
{ return read_roothub (hc, portstatus [i], 0xffe0fce0); }
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index a9d7119..a7fa0d7 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -40,6 +40,7 @@
#include <linux/moduleparam.h>
#include <linux/delay.h>
#include <linux/ioport.h>
+#include <linux/pci_ids.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
@@ -210,15 +211,16 @@
* these cannot be inlines because we need the structure offset!!
* Does anyone have a better way?????
*/
+#define ftdi_read_pcimem(pdev, member, data) usb_ftdi_elan_read_pcimem(pdev, \
+ offsetof(struct ohci_regs, member), 0, data);
+#define ftdi_write_pcimem(pdev, member, data) usb_ftdi_elan_write_pcimem(pdev, \
+ offsetof(struct ohci_regs, member), 0, data);
#define u132_read_pcimem(u132, member, data) \
usb_ftdi_elan_read_pcimem(u132->platform_dev, offsetof(struct \
ohci_regs, member), 0, data);
#define u132_write_pcimem(u132, member, data) \
usb_ftdi_elan_write_pcimem(u132->platform_dev, offsetof(struct \
ohci_regs, member), 0, data);
-#define u132_write_pcimem_byte(u132, member, data) \
- usb_ftdi_elan_write_pcimem(u132->platform_dev, offsetof(struct \
- ohci_regs, member), 0x0e, data);
static inline struct u132 *udev_to_u132(struct u132_udev *udev)
{
u8 udev_number = udev->udev_number;
@@ -1574,59 +1576,12 @@
return "?";
}
-static int u132_usb_reset(struct u132 *u132)
-{
- int retval;
- retval = u132_read_pcimem(u132, control, &u132->hc_control);
- if (retval)
- return retval;
- u132->hc_control &= OHCI_CTRL_RWC;
- retval = u132_write_pcimem(u132, control, u132->hc_control);
- if (retval)
- return retval;
- return 0;
-}
-
static int u132_init(struct u132 *u132)
{
int retval;
u32 control;
u132_disable(u132);
- u132->next_statechange =
- jiffies; /* SMM owns the HC? not for long! */ {
- u32 control;
- retval = u132_read_pcimem(u132, control, &control);
- if (retval)
- return retval;
- if (control & OHCI_CTRL_IR) {
- u32 temp = 50;
- retval = u132_write_pcimem(u132, intrenable,
- OHCI_INTR_OC);
- if (retval)
- return retval;
- retval = u132_write_pcimem_byte(u132, cmdstatus,
- OHCI_OCR);
- if (retval)
- return retval;
- check:{
- retval = u132_read_pcimem(u132, control,
- &control);
- if (retval)
- return retval;
- }
- if (control & OHCI_CTRL_IR) {
- msleep(10);
- if (--temp == 0) {
- dev_err(&u132->platform_dev->dev, "USB "
- "HC takeover failed!(BIOS/SMM b"
- "ug) control=%08X\n", control);
- return -EBUSY;
- }
- goto check;
- }
- u132_usb_reset(u132);
- }
- }
+ u132->next_statechange = jiffies;
retval = u132_write_pcimem(u132, intrdisable, OHCI_INTR_MIE);
if (retval)
return retval;
@@ -1725,7 +1680,7 @@
retry:retval = u132_read_pcimem(u132, cmdstatus, &status);
if (retval)
return retval;
- retval = u132_write_pcimem_byte(u132, cmdstatus, OHCI_HCR);
+ retval = u132_write_pcimem(u132, cmdstatus, OHCI_HCR);
if (retval)
return retval;
extra:{
@@ -1782,7 +1737,7 @@
retval = u132_write_pcimem(u132, control, u132->hc_control);
if (retval)
return retval;
- retval = u132_write_pcimem_byte(u132, cmdstatus, OHCI_BLF);
+ retval = u132_write_pcimem(u132, cmdstatus, OHCI_BLF);
if (retval)
return retval;
retval = u132_read_pcimem(u132, cmdstatus, &cmdstatus);
@@ -1839,8 +1794,8 @@
{
struct u132 *u132 = hcd_to_u132(hcd);
if (u132->going > 1) {
- dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
- , u132->going);
+ dev_err(&u132->platform_dev->dev, "u132 device %p(hcd=%p) has b"
+ "een removed %d\n", u132, hcd, u132->going);
} else if (u132->going > 0) {
dev_err(&u132->platform_dev->dev, "device hcd=%p is being remov"
"ed\n", hcd);
@@ -2545,8 +2500,9 @@
{
struct u132 *u132 = hcd_to_u132(hcd);
if (u132->going > 2) {
- dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
- , u132->going);
+ dev_err(&u132->platform_dev->dev, "u132 device %p(hcd=%p hep=%p"
+ ") has been removed %d\n", u132, hcd, hep,
+ u132->going);
} else {
struct u132_endp *endp = hep->hcpriv;
if (endp)
@@ -2790,7 +2746,6 @@
} else if (u132->going > 0) {
dev_err(&u132->platform_dev->dev, "device hcd=%p is being remov"
"ed\n", hcd);
- dump_stack();
return -ESHUTDOWN;
} else {
int i, changed = 0, length = 1;
@@ -3034,12 +2989,15 @@
struct usb_hcd *hcd = platform_get_drvdata(pdev);
if (hcd) {
struct u132 *u132 = hcd_to_u132(hcd);
- dump_stack();
if (u132->going++ > 1) {
+ dev_err(&u132->platform_dev->dev, "already being remove"
+ "d\n");
return -ENODEV;
} else {
int rings = MAX_U132_RINGS;
int endps = MAX_U132_ENDPS;
+ dev_err(&u132->platform_dev->dev, "removing device u132"
+ ".%d\n", u132->sequence_num);
msleep(100);
down(&u132->sw_lock);
u132_monitor_cancel_work(u132);
@@ -3121,10 +3079,24 @@
static int __devinit u132_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
+ int retval;
+ u32 control;
+ u32 rh_a = -1;
+ u32 num_ports;
msleep(100);
if (u132_exiting > 0) {
return -ENODEV;
- } /* refuse to confuse usbcore */
+ }
+ retval = ftdi_write_pcimem(pdev, intrdisable, OHCI_INTR_MIE);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(pdev, control, &control);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(pdev, roothub.a, &rh_a);
+ if (retval)
+ return retval;
+ num_ports = rh_a & RH_A_NDP; /* refuse to confuse usbcore */
if (pdev->dev.dma_mask) {
return -EINVAL;
}
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index e87692c..acd101c 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -60,6 +60,11 @@
Alan Stern"
#define DRIVER_DESC "USB Universal Host Controller Interface driver"
+/* for flakey hardware, ignore overcurrent indicators */
+static int ignore_oc;
+module_param(ignore_oc, bool, S_IRUGO);
+MODULE_PARM_DESC(ignore_oc, "ignore hardware overcurrent indications");
+
/*
* debug = 0, no debugging messages
* debug = 1, dump failed URBs except for stalls
@@ -169,6 +174,11 @@
{
int port;
+ /* If we have to ignore overcurrent events then almost by definition
+ * we can't depend on resume-detect interrupts. */
+ if (ignore_oc)
+ return 1;
+
switch (to_pci_dev(uhci_dev(uhci))->vendor) {
default:
break;
@@ -921,7 +931,8 @@
{
int retval = -ENOMEM;
- printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION "\n");
+ printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION "%s\n",
+ ignore_oc ? ", overcurrent ignored" : "");
if (usb_disabled())
return -ENODEV;
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index f8347f1..bacc25c 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -52,10 +52,20 @@
static inline int get_hub_status_data(struct uhci_hcd *uhci, char *buf)
{
int port;
+ int mask = RWC_BITS;
+
+ /* Some boards (both VIA and Intel apparently) report bogus
+ * overcurrent indications, causing massive log spam unless
+ * we completely ignore them. This doesn't seem to be a problem
+ * with the chipset so much as with the way it is connected on
+ * the motherboard; if the overcurrent input is left to float
+ * then it may constantly register false positives. */
+ if (ignore_oc)
+ mask &= ~USBPORTSC_OCC;
*buf = 0;
for (port = 0; port < uhci->rh_numports; ++port) {
- if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) & RWC_BITS) ||
+ if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) & mask) ||
test_bit(port, &uhci->port_c_suspend))
*buf |= (1 << (port + 1));
}
@@ -263,7 +273,7 @@
wPortChange |= USB_PORT_STAT_C_CONNECTION;
if (status & USBPORTSC_PEC)
wPortChange |= USB_PORT_STAT_C_ENABLE;
- if (status & USBPORTSC_OCC)
+ if ((status & USBPORTSC_OCC) && !ignore_oc)
wPortChange |= USB_PORT_STAT_C_OVERCURRENT;
if (test_bit(port, &uhci->port_c_suspend)) {
diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
index 8a62d47..e308f6d 100644
--- a/drivers/usb/input/Kconfig
+++ b/drivers/usb/input/Kconfig
@@ -7,7 +7,8 @@
config USB_HID
tristate "USB Human Interface Device (full HID) support"
default y
- depends on USB && HID
+ depends on USB
+ select HID
---help---
Say Y here if you want full HID support to connect USB keyboards,
mice, joysticks, graphic tablets, or any other HID based devices
diff --git a/drivers/usb/input/wacom_sys.c b/drivers/usb/input/wacom_sys.c
index e7cc20a..12b4274 100644
--- a/drivers/usb/input/wacom_sys.c
+++ b/drivers/usb/input/wacom_sys.c
@@ -159,13 +159,13 @@
{
input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3);
- input_set_abs_params(input_dev, ABS_RX, 0, 4097, 0, 0);
+ input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
}
void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
- input_set_abs_params(input_dev, ABS_RY, 0, 4097, 0, 0);
+ input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
}
void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
diff --git a/drivers/usb/input/wacom_wac.c b/drivers/usb/input/wacom_wac.c
index 92726fe..4142e36 100644
--- a/drivers/usb/input/wacom_wac.c
+++ b/drivers/usb/input/wacom_wac.c
@@ -209,13 +209,15 @@
wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04);
}
- }
-
- if (data[1] & 0x10)
wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
+ }
else
wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
- wacom_report_key(wcombo, wacom->tool[0], data[1] & 0x10);
+
+ if (data[1] & 0x10) /* only report prox-in when in area */
+ wacom_report_key(wcombo, wacom->tool[0], 1);
+ if (!(data[1] & 0x90)) /* report prox-out when physically out */
+ wacom_report_key(wcombo, wacom->tool[0], 0);
wacom_input_sync(wcombo);
/* send pad data */
@@ -405,7 +407,7 @@
if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40))
return 0;
- if (wacom->features->type >= INTUOS3) {
+ if (wacom->features->type >= INTUOS3S) {
wacom_report_abs(wcombo, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
wacom_report_abs(wcombo, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1));
wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 2) & 0x3f));
@@ -423,7 +425,7 @@
if (data[1] & 0x02) {
/* Rotation packet */
- if (wacom->features->type >= INTUOS3) {
+ if (wacom->features->type >= INTUOS3S) {
/* I3 marker pen rotation reported as wheel
* due to valuator limitation
*/
@@ -547,11 +549,11 @@
{ "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 63, GRAPHIRE },
{ "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 63, WACOM_G4 },
{ "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 63, WACOM_G4 },
- { "Wacom Volito", 8, 5104, 3712, 511, 0, GRAPHIRE },
- { "Wacom PenStation2", 8, 3250, 2320, 255, 0, GRAPHIRE },
- { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 0, GRAPHIRE },
- { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 0, GRAPHIRE },
- { "Wacom PenPartner2", 8, 3250, 2320, 255, 0, GRAPHIRE },
+ { "Wacom Volito", 8, 5104, 3712, 511, 63, GRAPHIRE },
+ { "Wacom PenStation2", 8, 3250, 2320, 255, 63, GRAPHIRE },
+ { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE },
+ { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 63, GRAPHIRE },
+ { "Wacom PenPartner2", 8, 3250, 2320, 255, 63, GRAPHIRE },
{ "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 63, INTUOS },
{ "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 63, INTUOS },
{ "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 63, INTUOS },
@@ -580,7 +582,7 @@
{ "Wacom Intuos3 12x12", 10, 60960, 60960, 1023, 63, INTUOS3L },
{ "Wacom Intuos3 12x19", 10, 97536, 60960, 1023, 63, INTUOS3L },
{ "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 63, INTUOS3 },
- { "Wacom Intuos3 4x6", 10, 31496, 19685, 1023, 15, INTUOS3S },
+ { "Wacom Intuos3 4x6", 10, 31496, 19685, 1023, 63, INTUOS3S },
{ "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 63, INTUOS },
{ }
diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c
index 6c7f3ef..b5332e6 100644
--- a/drivers/usb/misc/auerswald.c
+++ b/drivers/usb/misc/auerswald.c
@@ -1376,7 +1376,7 @@
}
/* we have access to the device. Now lets allocate memory */
- ccp = (pauerchar_t) kmalloc(sizeof(auerchar_t), GFP_KERNEL);
+ ccp = kzalloc(sizeof(auerchar_t), GFP_KERNEL);
if (ccp == NULL) {
err ("out of memory");
ret = -ENOMEM;
@@ -1384,7 +1384,6 @@
}
/* Initialize device descriptor */
- memset( ccp, 0, sizeof(auerchar_t));
init_MUTEX( &ccp->mutex);
init_MUTEX( &ccp->readmutex);
auerbuf_init (&ccp->bufctl);
@@ -1912,14 +1911,13 @@
return -ENODEV;
/* allocate memory for our device and initialize it */
- cp = kmalloc (sizeof(auerswald_t), GFP_KERNEL);
+ cp = kzalloc (sizeof(auerswald_t), GFP_KERNEL);
if (cp == NULL) {
err ("out of memory");
goto pfail;
}
/* Initialize device descriptor */
- memset (cp, 0, sizeof(auerswald_t));
init_MUTEX (&cp->mutex);
cp->usbdev = usbdev;
auerchain_init (&cp->controlchain);
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index 18b1925..41c0161 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -40,6 +40,7 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/ioctl.h>
+#include <linux/pci_ids.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kref.h>
@@ -51,6 +52,10 @@
MODULE_DESCRIPTION("FTDI ELAN driver");
MODULE_LICENSE("GPL");
#define INT_MODULE_PARM(n, v) static int n = v;module_param(n, int, 0444)
+static int distrust_firmware = 1;
+module_param(distrust_firmware, bool, 0);
+MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren"
+ "t setup");
extern struct platform_driver u132_platform_driver;
static struct workqueue_struct *status_queue;
static struct workqueue_struct *command_queue;
@@ -66,7 +71,9 @@
* end of the global variables protected by ftdi_module_lock
*/
#include "usb_u132.h"
-#define TD_DEVNOTRESP 5
+#include <asm/io.h>
+#include "../core/hcd.h"
+#include "../host/ohci.h"
/* Define these values to match your devices*/
#define USB_FTDI_ELAN_VENDOR_ID 0x0403
#define USB_FTDI_ELAN_PRODUCT_ID 0xd6ea
@@ -551,7 +558,7 @@
} else {
dev_err(&ftdi->udev->dev, "initialized failed - trying "
"again in 10 seconds\n");
- work_delay_in_msec = 10 *1000;
+ work_delay_in_msec = 1 *1000;
}
} else if (ftdi->registered == 0) {
work_delay_in_msec = 10;
@@ -2288,82 +2295,229 @@
}
}
-static int ftdi_elan_enumeratePCI(struct usb_ftdi *ftdi)
+
+#define ftdi_read_pcimem(ftdi, member, data) ftdi_elan_read_pcimem(ftdi, \
+ offsetof(struct ohci_regs, member), 0, data);
+#define ftdi_write_pcimem(ftdi, member, data) ftdi_elan_write_pcimem(ftdi, \
+ offsetof(struct ohci_regs, member), 0, data);
+#define OHCI_QUIRK_AMD756 0x01
+#define OHCI_QUIRK_SUPERIO 0x02
+#define OHCI_QUIRK_INITRESET 0x04
+#define OHCI_BIG_ENDIAN 0x08
+#define OHCI_QUIRK_ZFMICRO 0x10
+#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
+#define OHCI_INTR_INIT (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | \
+ OHCI_INTR_WDH)
+static int ftdi_elan_check_controller(struct usb_ftdi *ftdi, int quirk)
+{
+ int devices = 0;
+ int retval;
+ u32 hc_control;
+ int num_ports;
+ u32 control;
+ u32 rh_a = -1;
+ u32 status;
+ u32 fminterval;
+ u32 hc_fminterval;
+ u32 periodicstart;
+ u32 cmdstatus;
+ u32 roothub_a;
+ int mask = OHCI_INTR_INIT;
+ int sleep_time = 0;
+ int reset_timeout = 30; /* ... allow extra time */
+ int temp;
+ retval = ftdi_write_pcimem(ftdi, intrdisable, OHCI_INTR_MIE);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, control, &control);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, roothub.a, &rh_a);
+ if (retval)
+ return retval;
+ num_ports = rh_a & RH_A_NDP;
+ retval = ftdi_read_pcimem(ftdi, fminterval, &hc_fminterval);
+ if (retval)
+ return retval;
+ hc_fminterval &= 0x3fff;
+ if (hc_fminterval != FI) {
+ }
+ hc_fminterval |= FSMP(hc_fminterval) << 16;
+ retval = ftdi_read_pcimem(ftdi, control, &hc_control);
+ if (retval)
+ return retval;
+ switch (hc_control & OHCI_CTRL_HCFS) {
+ case OHCI_USB_OPER:
+ sleep_time = 0;
+ break;
+ case OHCI_USB_SUSPEND:
+ case OHCI_USB_RESUME:
+ hc_control &= OHCI_CTRL_RWC;
+ hc_control |= OHCI_USB_RESUME;
+ sleep_time = 10;
+ break;
+ default:
+ hc_control &= OHCI_CTRL_RWC;
+ hc_control |= OHCI_USB_RESET;
+ sleep_time = 50;
+ break;
+ }
+ retval = ftdi_write_pcimem(ftdi, control, hc_control);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, control, &control);
+ if (retval)
+ return retval;
+ msleep(sleep_time);
+ retval = ftdi_read_pcimem(ftdi, roothub.a, &roothub_a);
+ if (retval)
+ return retval;
+ if (!(roothub_a & RH_A_NPS)) { /* power down each port */
+ for (temp = 0; temp < num_ports; temp++) {
+ retval = ftdi_write_pcimem(ftdi,
+ roothub.portstatus[temp], RH_PS_LSDA);
+ if (retval)
+ return retval;
+ }
+ }
+ retval = ftdi_read_pcimem(ftdi, control, &control);
+ if (retval)
+ return retval;
+ retry:retval = ftdi_read_pcimem(ftdi, cmdstatus, &status);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, cmdstatus, OHCI_HCR);
+ if (retval)
+ return retval;
+ extra:{
+ retval = ftdi_read_pcimem(ftdi, cmdstatus, &status);
+ if (retval)
+ return retval;
+ if (0 != (status & OHCI_HCR)) {
+ if (--reset_timeout == 0) {
+ dev_err(&ftdi->udev->dev, "USB HC reset timed o"
+ "ut!\n");
+ return -ENODEV;
+ } else {
+ msleep(5);
+ goto extra;
+ }
+ }
+ }
+ if (quirk & OHCI_QUIRK_INITRESET) {
+ retval = ftdi_write_pcimem(ftdi, control, hc_control);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, control, &control);
+ if (retval)
+ return retval;
+ }
+ retval = ftdi_write_pcimem(ftdi, ed_controlhead, 0x00000000);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, ed_bulkhead, 0x11000000);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, hcca, 0x00000000);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, fminterval, &fminterval);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, fminterval,
+ ((fminterval & FIT) ^ FIT) | hc_fminterval);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, periodicstart,
+ ((9 *hc_fminterval) / 10) & 0x3fff);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, fminterval, &fminterval);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, periodicstart, &periodicstart);
+ if (retval)
+ return retval;
+ if (0 == (fminterval & 0x3fff0000) || 0 == periodicstart) {
+ if (!(quirk & OHCI_QUIRK_INITRESET)) {
+ quirk |= OHCI_QUIRK_INITRESET;
+ goto retry;
+ } else
+ dev_err(&ftdi->udev->dev, "init err(%08x %04x)\n",
+ fminterval, periodicstart);
+ } /* start controller operations */
+ hc_control &= OHCI_CTRL_RWC;
+ hc_control |= OHCI_CONTROL_INIT | OHCI_CTRL_BLE | OHCI_USB_OPER;
+ retval = ftdi_write_pcimem(ftdi, control, hc_control);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, cmdstatus, OHCI_BLF);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, cmdstatus, &cmdstatus);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, control, &control);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, roothub.status, RH_HS_DRWE);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, intrstatus, mask);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, intrdisable,
+ OHCI_INTR_MIE | OHCI_INTR_OC | OHCI_INTR_RHSC | OHCI_INTR_FNO |
+ OHCI_INTR_UE | OHCI_INTR_RD | OHCI_INTR_SF | OHCI_INTR_WDH |
+ OHCI_INTR_SO);
+ if (retval)
+ return retval; /* handle root hub init quirks ... */
+ retval = ftdi_read_pcimem(ftdi, roothub.a, &roothub_a);
+ if (retval)
+ return retval;
+ roothub_a &= ~(RH_A_PSM | RH_A_OCPM);
+ if (quirk & OHCI_QUIRK_SUPERIO) {
+ roothub_a |= RH_A_NOCP;
+ roothub_a &= ~(RH_A_POTPGT | RH_A_NPS);
+ retval = ftdi_write_pcimem(ftdi, roothub.a, roothub_a);
+ if (retval)
+ return retval;
+ } else if ((quirk & OHCI_QUIRK_AMD756) || distrust_firmware) {
+ roothub_a |= RH_A_NPS;
+ retval = ftdi_write_pcimem(ftdi, roothub.a, roothub_a);
+ if (retval)
+ return retval;
+ }
+ retval = ftdi_write_pcimem(ftdi, roothub.status, RH_HS_LPSC);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, roothub.b,
+ (roothub_a & RH_A_NPS) ? 0 : RH_B_PPCM);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, control, &control);
+ if (retval)
+ return retval;
+ mdelay((roothub_a >> 23) & 0x1fe);
+ for (temp = 0; temp < num_ports; temp++) {
+ u32 portstatus;
+ retval = ftdi_read_pcimem(ftdi, roothub.portstatus[temp],
+ &portstatus);
+ if (retval)
+ return retval;
+ if (1 & portstatus)
+ devices += 1;
+ }
+ return devices;
+}
+
+static int ftdi_elan_setup_controller(struct usb_ftdi *ftdi, int fn)
{
u32 latence_timer;
- u32 controlreg;
int UxxxStatus;
u32 pcidata;
int reg = 0;
- int foundOHCI = 0;
- u8 fn;
- int activePCIfn = 0;
- u32 pciVID = 0;
- u32 pciPID = 0;
- UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
- if (UxxxStatus)
- return UxxxStatus;
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000000L);
- if (UxxxStatus)
- return UxxxStatus;
- msleep(750);
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x100);
- if (UxxxStatus)
- return UxxxStatus;
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x500);
- if (UxxxStatus)
- return UxxxStatus;
- UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
- if (UxxxStatus)
- return UxxxStatus;
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020CL | 0x000);
- if (UxxxStatus)
- return UxxxStatus;
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020DL | 0x000);
- if (UxxxStatus)
- return UxxxStatus;
- msleep(250);
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020FL | 0x000);
- if (UxxxStatus)
- return UxxxStatus;
- UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
- if (UxxxStatus)
- return UxxxStatus;
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x800);
- if (UxxxStatus)
- return UxxxStatus;
- UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
- if (UxxxStatus)
- return UxxxStatus;
- UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
- if (UxxxStatus)
- return UxxxStatus;
- msleep(1000);
- for (fn = 0; (fn < 4) && (!foundOHCI); fn++) {
- activePCIfn = fn << 8;
- ftdi->function = fn + 1;
- UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
- &pcidata);
- if (UxxxStatus)
- return UxxxStatus;
- pciVID = pcidata & 0xFFFF;
- pciPID = (pcidata >> 16) & 0xFFFF;
- if ((pciVID == 0x1045) && (pciPID == 0xc861)) {
- foundOHCI = 1;
- } else if ((pciVID == 0x1033) && (pciPID == 0x0035)) {
- foundOHCI = 1;
- } else if ((pciVID == 0x10b9) && (pciPID == 0x5237)) {
- foundOHCI = 1;
- } else if ((pciVID == 0x11c1) && (pciPID == 0x5802)) {
- foundOHCI = 1;
- } else if ((pciVID == 0x11AB) && (pciPID == 0x1FA6)) {
- }
- }
- if (foundOHCI == 0) {
- return -ENXIO;
- }
- ftdi->platform_data.vendor = pciVID;
- ftdi->platform_data.device = pciPID;
+ int activePCIfn = fn << 8;
UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x2800);
if (UxxxStatus)
return UxxxStatus;
@@ -2408,162 +2562,201 @@
&pcidata);
if (UxxxStatus)
return UxxxStatus;
+ for (reg = 0; reg <= 0x54; reg += 4) {
+ UxxxStatus = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (UxxxStatus)
+ return UxxxStatus;
+ }
return 0;
}
+static int ftdi_elan_close_controller(struct usb_ftdi *ftdi, int fn)
+{
+ u32 latence_timer;
+ int UxxxStatus;
+ u32 pcidata;
+ int reg = 0;
+ int activePCIfn = fn << 8;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x2800);
+ if (UxxxStatus)
+ return UxxxStatus;
+ reg = 16;
+ UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0,
+ 0xFFFFFFFF);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0,
+ 0x00000000);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
+ if (UxxxStatus)
+ return UxxxStatus;
+ reg = 12;
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &latence_timer);
+ if (UxxxStatus)
+ return UxxxStatus;
+ latence_timer &= 0xFFFF00FF;
+ latence_timer |= 0x00001600;
+ UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00,
+ latence_timer);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
+ if (UxxxStatus)
+ return UxxxStatus;
+ reg = 4;
+ UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00,
+ 0x00);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
+ if (UxxxStatus)
+ return UxxxStatus;
+ return 0;
+}
+
+static int ftdi_elan_found_controller(struct usb_ftdi *ftdi, int fn, int quirk)
+{
+ int result;
+ int UxxxStatus;
+ UxxxStatus = ftdi_elan_setup_controller(ftdi, fn);
+ if (UxxxStatus)
+ return UxxxStatus;
+ result = ftdi_elan_check_controller(ftdi, quirk);
+ UxxxStatus = ftdi_elan_close_controller(ftdi, fn);
+ if (UxxxStatus)
+ return UxxxStatus;
+ return result;
+}
+
+static int ftdi_elan_enumeratePCI(struct usb_ftdi *ftdi)
+{
+ u32 controlreg;
+ u8 sensebits;
+ int UxxxStatus;
+ UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000000L);
+ if (UxxxStatus)
+ return UxxxStatus;
+ msleep(750);
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x100);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x500);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020CL | 0x000);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020DL | 0x000);
+ if (UxxxStatus)
+ return UxxxStatus;
+ msleep(250);
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020FL | 0x000);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x800);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ msleep(1000);
+ sensebits = (controlreg >> 16) & 0x000F;
+ if (0x0D == sensebits)
+ return 0;
+ else
+ return - ENXIO;
+}
+
static int ftdi_elan_setupOHCI(struct usb_ftdi *ftdi)
{
+ int UxxxStatus;
u32 pcidata;
- int U132Status;
- int reg;
- int reset_repeat = 0;
- do_reset:reg = 8;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x0e, 0x01);
- if (U132Status)
- return U132Status;
- reset_check:{
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- if (pcidata & 1) {
- msleep(500);
- if (reset_repeat++ > 100) {
- reset_repeat = 0;
- goto do_reset;
- } else
- goto reset_check;
+ int reg = 0;
+ u8 fn;
+ int activePCIfn = 0;
+ int max_devices = 0;
+ int controllers = 0;
+ int unrecognized = 0;
+ ftdi->function = 0;
+ for (fn = 0; (fn < 4); fn++) {
+ u32 pciVID = 0;
+ u32 pciPID = 0;
+ int devices = 0;
+ activePCIfn = fn << 8;
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
+ if (UxxxStatus)
+ return UxxxStatus;
+ pciVID = pcidata & 0xFFFF;
+ pciPID = (pcidata >> 16) & 0xFFFF;
+ if ((pciVID == PCI_VENDOR_ID_OPTI) && (pciPID == 0xc861)) {
+ devices = ftdi_elan_found_controller(ftdi, fn, 0);
+ controllers += 1;
+ } else if ((pciVID == PCI_VENDOR_ID_NEC) && (pciPID == 0x0035))
+ {
+ devices = ftdi_elan_found_controller(ftdi, fn, 0);
+ controllers += 1;
+ } else if ((pciVID == PCI_VENDOR_ID_AL) && (pciPID == 0x5237)) {
+ devices = ftdi_elan_found_controller(ftdi, fn, 0);
+ controllers += 1;
+ } else if ((pciVID == PCI_VENDOR_ID_ATT) && (pciPID == 0x5802))
+ {
+ devices = ftdi_elan_found_controller(ftdi, fn, 0);
+ controllers += 1;
+ } else if (pciVID == PCI_VENDOR_ID_AMD && pciPID == 0x740c) {
+ devices = ftdi_elan_found_controller(ftdi, fn,
+ OHCI_QUIRK_AMD756);
+ controllers += 1;
+ } else if (pciVID == PCI_VENDOR_ID_COMPAQ && pciPID == 0xa0f8) {
+ devices = ftdi_elan_found_controller(ftdi, fn,
+ OHCI_QUIRK_ZFMICRO);
+ controllers += 1;
+ } else if (0 == pcidata) {
+ } else
+ unrecognized += 1;
+ if (devices > max_devices) {
+ max_devices = devices;
+ ftdi->function = fn + 1;
+ ftdi->platform_data.vendor = pciVID;
+ ftdi->platform_data.device = pciPID;
}
}
- goto dump_regs;
- msleep(500);
- reg = 0x28;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x11000000);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x40;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x2edf);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x34;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x2edf2edf);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 4;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0xA0);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- msleep(250);
- reg = 8;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x0e, 0x04);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x28;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 8;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x48;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x00001200);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x54;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x58;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x34;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x28002edf);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- msleep(100);
- reg = 0x50;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x10000);
- if (U132Status)
- return U132Status;
- reg = 0x54;
- power_check:U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- if (!(pcidata & 1)) {
- msleep(500);
- goto power_check;
+ if (ftdi->function > 0) {
+ UxxxStatus = ftdi_elan_setup_controller(ftdi,
+ ftdi->function - 1);
+ if (UxxxStatus)
+ return UxxxStatus;
+ return 0;
+ } else if (controllers > 0) {
+ return -ENXIO;
+ } else if (unrecognized > 0) {
+ return -ENXIO;
+ } else {
+ ftdi->enumerated = 0;
+ return -ENXIO;
}
- msleep(3000);
- reg = 0x54;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x58;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x54;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x02);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x54;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x10);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- msleep(750);
- reg = 0x54;
- if (0) {
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x02);
- if (U132Status)
- return U132Status;
- }
- if (0) {
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- }
- reg = 0x54;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x58;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- dump_regs:for (reg = 0; reg <= 0x54; reg += 4) {
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- }
- return 0;
}
@@ -2688,6 +2881,7 @@
platform_device_unregister(&ftdi->platform_dev);
ftdi->synchronized = 0;
ftdi->enumerated = 0;
+ ftdi->initialized = 0;
ftdi->registered = 0;
}
flush_workqueue(status_queue);
diff --git a/drivers/usb/misc/phidgetservo.c b/drivers/usb/misc/phidgetservo.c
index 7163f05..0d9de2f 100644
--- a/drivers/usb/misc/phidgetservo.c
+++ b/drivers/usb/misc/phidgetservo.c
@@ -282,6 +282,7 @@
dev->dev = NULL;
goto out;
}
+ dev_set_drvdata(dev->dev, dev);
servo_count = dev->type & SERVO_COUNT_QUAD ? 4 : 1;
diff --git a/drivers/usb/misc/trancevibrator.c b/drivers/usb/misc/trancevibrator.c
index 33cd91d..67e2fc2 100644
--- a/drivers/usb/misc/trancevibrator.c
+++ b/drivers/usb/misc/trancevibrator.c
@@ -120,8 +120,8 @@
struct trancevibrator *dev;
dev = usb_get_intfdata (interface);
- usb_set_intfdata(interface, NULL);
device_remove_file(&interface->dev, &dev_attr_speed);
+ usb_set_intfdata(interface, NULL);
usb_put_dev(dev->udev);
kfree(dev);
}
diff --git a/drivers/usb/net/gl620a.c b/drivers/usb/net/gl620a.c
index a3242be..a6f0f4d 100644
--- a/drivers/usb/net/gl620a.c
+++ b/drivers/usb/net/gl620a.c
@@ -79,160 +79,6 @@
struct gl_packet packets;
};
-#ifdef GENELINK_ACK
-
-// FIXME: this code is incomplete, not debugged; it doesn't
-// handle interrupts correctly; it should use the generic
-// status IRQ code (which didn't exist back in 2001).
-
-struct gl_priv {
- struct urb *irq_urb;
- char irq_buf [INTERRUPT_BUFSIZE];
-};
-
-static inline int gl_control_write(struct usbnet *dev, u8 request, u16 value)
-{
- int retval;
-
- retval = usb_control_msg(dev->udev,
- usb_sndctrlpipe(dev->udev, 0),
- request,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- value,
- 0, // index
- 0, // data buffer
- 0, // size
- USB_CTRL_SET_TIMEOUT);
- return retval;
-}
-
-static void gl_interrupt_complete(struct urb *urb)
-{
- int status = urb->status;
-
- switch (status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d",
- __FUNCTION__, urb->status);
- }
-
- status = usb_submit_urb(urb, GFP_ATOMIC);
- if (status)
- err("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, status);
-}
-
-static int gl_interrupt_read(struct usbnet *dev)
-{
- struct gl_priv *priv = dev->priv_data;
- int retval;
-
- // issue usb interrupt read
- if (priv && priv->irq_urb) {
- // submit urb
- if ((retval = usb_submit_urb(priv->irq_urb, GFP_KERNEL)) != 0)
- dbg("gl_interrupt_read: submit fail - %X...", retval);
- else
- dbg("gl_interrupt_read: submit success...");
- }
-
- return 0;
-}
-
-// check whether another side is connected
-static int genelink_check_connect(struct usbnet *dev)
-{
- int retval;
-
- dbg("genelink_check_connect...");
-
- // detect whether another side is connected
- if ((retval = gl_control_write(dev, GENELINK_CONNECT_WRITE, 0)) != 0) {
- dbg("%s: genelink_check_connect write fail - %X",
- dev->net->name, retval);
- return retval;
- }
-
- // usb interrupt read to ack another side
- if ((retval = gl_interrupt_read(dev)) != 0) {
- dbg("%s: genelink_check_connect read fail - %X",
- dev->net->name, retval);
- return retval;
- }
-
- dbg("%s: genelink_check_connect read success", dev->net->name);
- return 0;
-}
-
-// allocate and initialize the private data for genelink
-static int genelink_init(struct usbnet *dev)
-{
- struct gl_priv *priv;
-
- // allocate the private data structure
- if ((priv = kmalloc(sizeof *priv, GFP_KERNEL)) == 0) {
- dbg("%s: cannot allocate private data per device",
- dev->net->name);
- return -ENOMEM;
- }
-
- // allocate irq urb
- if ((priv->irq_urb = usb_alloc_urb(0, GFP_KERNEL)) == 0) {
- dbg("%s: cannot allocate private irq urb per device",
- dev->net->name);
- kfree(priv);
- return -ENOMEM;
- }
-
- // fill irq urb
- usb_fill_int_urb(priv->irq_urb, dev->udev,
- usb_rcvintpipe(dev->udev, GENELINK_INTERRUPT_PIPE),
- priv->irq_buf, INTERRUPT_BUFSIZE,
- gl_interrupt_complete, 0,
- GENELINK_INTERRUPT_INTERVAL);
-
- // set private data pointer
- dev->priv_data = priv;
-
- return 0;
-}
-
-// release the private data
-static int genelink_free(struct usbnet *dev)
-{
- struct gl_priv *priv = dev->priv_data;
-
- if (!priv)
- return 0;
-
-// FIXME: can't cancel here; it's synchronous, and
-// should have happened earlier in any case (interrupt
-// handling needs to be generic)
-
- // cancel irq urb first
- usb_kill_urb(priv->irq_urb);
-
- // free irq urb
- usb_free_urb(priv->irq_urb);
-
- // free the private data structure
- kfree(priv);
-
- return 0;
-}
-
-#endif
-
static int genelink_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
{
struct gl_header *header;
diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c
index c54235f..e0eecda 100644
--- a/drivers/usb/net/rtl8150.c
+++ b/drivers/usb/net/rtl8150.c
@@ -124,10 +124,11 @@
#define RX_URB_FAIL 3
/* Define these values to match your device */
-#define VENDOR_ID_REALTEK 0x0bda
+#define VENDOR_ID_REALTEK 0x0bda
#define VENDOR_ID_MELCO 0x0411
-#define VENDOR_ID_MICRONET 0x3980
+#define VENDOR_ID_MICRONET 0x3980
#define VENDOR_ID_LONGSHINE 0x07b8
+#define VENDOR_ID_OQO 0x1557
#define VENDOR_ID_ZYXEL 0x0586
#define PRODUCT_ID_RTL8150 0x8150
@@ -144,6 +145,7 @@
{USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)},
{USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)},
{USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)},
+ {USB_DEVICE(VENDOR_ID_OQO, PRODUCT_ID_RTL8150)},
{USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)},
{}
};
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index 96c7372..f2ca76a 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -19,8 +19,11 @@
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */
{ USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */
+ { USB_DEVICE(0x1410, 0x1130) }, /* Novatel Wireless S720 CDMA/EV-DO */
+ { USB_DEVICE(0x1410, 0x2110) }, /* Novatel Wireless U720 CDMA/EV-DO */
{ USB_DEVICE(0x1410, 0x1430) }, /* Novatel Merlin XU870 HSDPA/3G */
{ USB_DEVICE(0x1410, 0x1100) }, /* ExpressCard34 Qualcomm 3G CDMA */
+ { USB_DEVICE(0x413c, 0x8115) }, /* Dell Wireless HSDPA 5500 */
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 2f9b7ac..7ebaffd 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -69,6 +69,7 @@
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
+ { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
{ } /* Terminating Entry */
};
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 45cdf9b..6bc1f40 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -962,21 +962,6 @@
cypress_set_termios(port, &priv->tmp_termios);
return (0);
break;
- /* these are called when setting baud rate from gpsd */
- case TCGETS:
- if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct termios))) {
- return -EFAULT;
- }
- return (0);
- break;
- case TCSETS:
- if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct termios))) {
- return -EFAULT;
- }
- /* here we need to call cypress_set_termios to invoke the new settings */
- cypress_set_termios(port, &priv->tmp_termios);
- return (0);
- break;
/* This code comes from drivers/char/serial.c and ftdi_sio.c */
case TIOCMIWAIT:
while (priv != NULL) {
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 41b0ad2..6986e75 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -452,6 +452,7 @@
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) },
{ USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
{ USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
{ USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index bae117d..40dd394 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -312,8 +312,9 @@
/* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */
/* unit for PIC16's/PIC18's */
-#define FTDI_CCSICDU20_0_PID 0xF9D0
-#define FTDI_CCSICDU40_1_PID 0xF9D1
+#define FTDI_CCSICDU20_0_PID 0xF9D0
+#define FTDI_CCSICDU40_1_PID 0xF9D1
+#define FTDI_CCSMACHX_2_PID 0xF9D2
/* Inside Accesso contactless reader (http://www.insidefr.com) */
#define INSIDE_ACCESSO 0xFAD0
diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c
index 77b9772..d3be921 100644
--- a/drivers/usb/serial/funsoft.c
+++ b/drivers/usb/serial/funsoft.c
@@ -14,6 +14,9 @@
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
+#include <asm/uaccess.h>
+
+static int debug;
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x1404, 0xcddc) },
@@ -21,6 +24,26 @@
};
MODULE_DEVICE_TABLE(usb, id_table);
+static int funsoft_ioctl(struct usb_serial_port *port, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct termios t;
+
+ dbg("%s - port %d, cmd 0x%04x", __FUNCTION__, port->number, cmd);
+
+ if (cmd == TCSETSF) {
+ if (user_termios_to_kernel_termios(&t, (void __user *)arg))
+ return -EFAULT;
+
+ dbg("%s - iflag:%x oflag:%x cflag:%x lflag:%x", __FUNCTION__,
+ t.c_iflag, t.c_oflag, t.c_cflag, t.c_lflag);
+
+ if (!(t.c_lflag & ICANON))
+ return -EINVAL;
+ }
+ return -ENOIOCTLCMD;
+}
+
static struct usb_driver funsoft_driver = {
.name = "funsoft",
.probe = usb_serial_probe,
@@ -39,6 +62,7 @@
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 1,
+ .ioctl = funsoft_ioctl,
};
static int __init funsoft_init(void)
@@ -63,3 +87,6 @@
module_init(funsoft_init);
module_exit(funsoft_exit);
MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 73d755d..5c4b06a 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -87,10 +87,6 @@
static void klsi_105_read_bulk_callback (struct urb *urb);
static void klsi_105_set_termios (struct usb_serial_port *port,
struct ktermios *old);
-static int klsi_105_ioctl (struct usb_serial_port *port,
- struct file * file,
- unsigned int cmd,
- unsigned long arg);
static void klsi_105_throttle (struct usb_serial_port *port);
static void klsi_105_unthrottle (struct usb_serial_port *port);
/*
@@ -140,7 +136,6 @@
.chars_in_buffer = klsi_105_chars_in_buffer,
.write_room = klsi_105_write_room,
.read_bulk_callback =klsi_105_read_bulk_callback,
- .ioctl = klsi_105_ioctl,
.set_termios = klsi_105_set_termios,
/*.break_ctl = klsi_105_break_ctl,*/
.tiocmget = klsi_105_tiocmget,
@@ -899,69 +894,6 @@
*/
return retval;
}
-
-static int klsi_105_ioctl (struct usb_serial_port *port, struct file * file,
- unsigned int cmd, unsigned long arg)
-{
- struct klsi_105_private *priv = usb_get_serial_port_data(port);
- void __user *user_arg = (void __user *)arg;
-
- dbg("%scmd=0x%x", __FUNCTION__, cmd);
-
- /* Based on code from acm.c and others */
- switch (cmd) {
- case TIOCMIWAIT:
- /* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/
- /* TODO */
- dbg("%s - TIOCMIWAIT not handled", __FUNCTION__);
- return -ENOIOCTLCMD;
- case TIOCGICOUNT:
- /* return count of modemline transitions */
- /* TODO */
- dbg("%s - TIOCGICOUNT not handled", __FUNCTION__);
- return -ENOIOCTLCMD;
- case TCGETS:
- /* return current info to caller */
- dbg("%s - TCGETS data faked/incomplete", __FUNCTION__);
-
- if (!access_ok(VERIFY_WRITE, user_arg, sizeof(struct termios)))
- return -EFAULT;
-
- if (kernel_termios_to_user_termios((struct termios __user *)arg,
- &priv->termios))
- return -EFAULT;
- return 0;
- case TCSETS:
- /* set port termios to the one given by the user */
- dbg("%s - TCSETS not handled", __FUNCTION__);
-
- if (!access_ok(VERIFY_READ, user_arg, sizeof(struct termios)))
- return -EFAULT;
-
- if (user_termios_to_kernel_termios(&priv->termios,
- (struct termios __user *)arg))
- return -EFAULT;
- klsi_105_set_termios(port, &priv->termios);
- return 0;
- case TCSETSW: {
- /* set port termios and try to wait for completion of last
- * write operation */
- /* We guess here. If there are not too many write urbs
- * outstanding, we lie. */
- /* what is the right way to wait here? schedule() ? */
- /*
- while (klsi_105_chars_in_buffer(port) > (NUM_URBS / 4 ) * URB_TRANSFER_BUFFER_SIZE)
- schedule();
- */
- return -ENOIOCTLCMD;
- }
- default:
- dbg("%s: arg not supported - 0x%04x", __FUNCTION__,cmd);
- return(-ENOIOCTLCMD);
- break;
- }
- return 0;
-} /* klsi_105_ioctl */
static void klsi_105_throttle (struct usb_serial_port *port)
{
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 8cc728a..83f6614 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2460,12 +2460,6 @@
tty_ldisc_deref(ld);
return 0;
- case TCGETS:
- if (kernel_termios_to_user_termios
- ((struct termios __user *)argp, tty->termios))
- return -EFAULT;
- return 0;
-
case TIOCSERGETLSR:
dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__, port->number);
return mos7840_get_lsr_info(mos7840_port, argp);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 0ae4098..819266b 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -79,6 +79,7 @@
#define OPTION_PRODUCT_COBRA 0x6500
#define OPTION_PRODUCT_COBRA2 0x6600
#define HUAWEI_PRODUCT_E600 0x1001
+#define HUAWEI_PRODUCT_E220 0x1003
#define AUDIOVOX_PRODUCT_AIRCARD 0x0112
#define NOVATELWIRELESS_PRODUCT_U740 0x1400
#define ANYDATA_PRODUCT_ID 0x6501
@@ -90,6 +91,7 @@
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
@@ -103,6 +105,7 @@
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index db8b260..5fe7ff4 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -153,6 +153,13 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+/* Reported by <honkkis@gmail.com> */
+UNUSUAL_DEV( 0x0421, 0x0433, 0x0100, 0x0100,
+ "Nokia",
+ "E70",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
/* Reported by Jon Hart <Jon.Hart@web.de> */
UNUSUAL_DEV( 0x0421, 0x0434, 0x0100, 0x0100,
"Nokia",
@@ -1328,6 +1335,15 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* This prevents the kernel from detecting the virtual cd-drive with the
+ * Windows drivers. <johann.wilhelm@student.tugraz.at>
+*/
+UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0xffff,
+ "HUAWEI",
+ "E220 USB-UMTS Install",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_DEVICE),
+
/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001,
"Minolta",
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 38eb0b6..b4947c8 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1216,7 +1216,7 @@
done:
if (res_specified) {
dev_info(dev, "overriding resolution: %dx%d\n", xres, yres);
- inf->xres = xres; inf->yres = yres;
+ inf->modes[0].xres = xres; inf->modes[0].yres = yres;
}
if (bpp_specified)
switch (bpp) {
@@ -1225,48 +1225,48 @@
case 4:
case 8:
case 16:
- inf->bpp = bpp;
+ inf->modes[0].bpp = bpp;
dev_info(dev, "overriding bit depth: %d\n", bpp);
break;
default:
dev_err(dev, "Depth %d is not valid\n", bpp);
}
} else if (!strncmp(this_opt, "pixclock:", 9)) {
- inf->pixclock = simple_strtoul(this_opt+9, NULL, 0);
- dev_info(dev, "override pixclock: %ld\n", inf->pixclock);
+ inf->modes[0].pixclock = simple_strtoul(this_opt+9, NULL, 0);
+ dev_info(dev, "override pixclock: %ld\n", inf->modes[0].pixclock);
} else if (!strncmp(this_opt, "left:", 5)) {
- inf->left_margin = simple_strtoul(this_opt+5, NULL, 0);
- dev_info(dev, "override left: %u\n", inf->left_margin);
+ inf->modes[0].left_margin = simple_strtoul(this_opt+5, NULL, 0);
+ dev_info(dev, "override left: %u\n", inf->modes[0].left_margin);
} else if (!strncmp(this_opt, "right:", 6)) {
- inf->right_margin = simple_strtoul(this_opt+6, NULL, 0);
- dev_info(dev, "override right: %u\n", inf->right_margin);
+ inf->modes[0].right_margin = simple_strtoul(this_opt+6, NULL, 0);
+ dev_info(dev, "override right: %u\n", inf->modes[0].right_margin);
} else if (!strncmp(this_opt, "upper:", 6)) {
- inf->upper_margin = simple_strtoul(this_opt+6, NULL, 0);
- dev_info(dev, "override upper: %u\n", inf->upper_margin);
+ inf->modes[0].upper_margin = simple_strtoul(this_opt+6, NULL, 0);
+ dev_info(dev, "override upper: %u\n", inf->modes[0].upper_margin);
} else if (!strncmp(this_opt, "lower:", 6)) {
- inf->lower_margin = simple_strtoul(this_opt+6, NULL, 0);
- dev_info(dev, "override lower: %u\n", inf->lower_margin);
+ inf->modes[0].lower_margin = simple_strtoul(this_opt+6, NULL, 0);
+ dev_info(dev, "override lower: %u\n", inf->modes[0].lower_margin);
} else if (!strncmp(this_opt, "hsynclen:", 9)) {
- inf->hsync_len = simple_strtoul(this_opt+9, NULL, 0);
- dev_info(dev, "override hsynclen: %u\n", inf->hsync_len);
+ inf->modes[0].hsync_len = simple_strtoul(this_opt+9, NULL, 0);
+ dev_info(dev, "override hsynclen: %u\n", inf->modes[0].hsync_len);
} else if (!strncmp(this_opt, "vsynclen:", 9)) {
- inf->vsync_len = simple_strtoul(this_opt+9, NULL, 0);
- dev_info(dev, "override vsynclen: %u\n", inf->vsync_len);
+ inf->modes[0].vsync_len = simple_strtoul(this_opt+9, NULL, 0);
+ dev_info(dev, "override vsynclen: %u\n", inf->modes[0].vsync_len);
} else if (!strncmp(this_opt, "hsync:", 6)) {
if (simple_strtoul(this_opt+6, NULL, 0) == 0) {
dev_info(dev, "override hsync: Active Low\n");
- inf->sync &= ~FB_SYNC_HOR_HIGH_ACT;
+ inf->modes[0].sync &= ~FB_SYNC_HOR_HIGH_ACT;
} else {
dev_info(dev, "override hsync: Active High\n");
- inf->sync |= FB_SYNC_HOR_HIGH_ACT;
+ inf->modes[0].sync |= FB_SYNC_HOR_HIGH_ACT;
}
} else if (!strncmp(this_opt, "vsync:", 6)) {
if (simple_strtoul(this_opt+6, NULL, 0) == 0) {
dev_info(dev, "override vsync: Active Low\n");
- inf->sync &= ~FB_SYNC_VERT_HIGH_ACT;
+ inf->modes[0].sync &= ~FB_SYNC_VERT_HIGH_ACT;
} else {
dev_info(dev, "override vsync: Active High\n");
- inf->sync |= FB_SYNC_VERT_HIGH_ACT;
+ inf->modes[0].sync |= FB_SYNC_VERT_HIGH_ACT;
}
} else if (!strncmp(this_opt, "dpc:", 4)) {
if (simple_strtoul(this_opt+4, NULL, 0) == 0) {
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index cd10b18..5d2a4a4 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -1200,9 +1200,9 @@
* Our LCD controller task (which is called when we blank or unblank)
* via keventd.
*/
-static void sa1100fb_task(void *dummy)
+static void sa1100fb_task(struct work_struct *w)
{
- struct sa1100fb_info *fbi = dummy;
+ struct sa1100fb_info *fbi = container_of(w, struct sa1100fb_info, task);
u_int state = xchg(&fbi->task_state, -1);
set_ctrlr_state(fbi, state);
@@ -1444,7 +1444,7 @@
fbi->max_bpp / 8;
init_waitqueue_head(&fbi->ctrlr_wait);
- INIT_WORK(&fbi->task, sa1100fb_task, fbi);
+ INIT_WORK(&fbi->task, sa1100fb_task);
init_MUTEX(&fbi->ctrlr_sem);
return fbi;
diff --git a/include/asm-arm/arch-iop13xx/iq81340.h b/include/asm-arm/arch-iop13xx/iq81340.h
index b98f8f1..ba2cf93 100644
--- a/include/asm-arm/arch-iop13xx/iq81340.h
+++ b/include/asm-arm/arch-iop13xx/iq81340.h
@@ -24,8 +24,5 @@
#define PBI_CF_IDE_BASE (IQ81340_CMP_FLSH)
#define PBI_CF_BAR_ADDR (IOP13XX_PBI_BAR1)
-/* These are the values used in the Machine description */
-#define PHYS_IO 0xfeffff00
-#define IO_PG_OFFSET 0xffffff00
-#define BOOT_PARAM_OFFSET 0x00000100
+
#endif /* _IQ81340_H_ */
diff --git a/include/asm-arm/arch-ixp23xx/memory.h b/include/asm-arm/arch-ixp23xx/memory.h
index c85fc06..6d859d7 100644
--- a/include/asm-arm/arch-ixp23xx/memory.h
+++ b/include/asm-arm/arch-ixp23xx/memory.h
@@ -41,21 +41,7 @@
data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR); \
__phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); })
-/*
- * Coherency support. Only supported on A2 CPUs or on A1
- * systems that have the cache coherency workaround.
- */
-static inline int __ixp23xx_arch_is_coherent(void)
-{
- extern unsigned int processor_id;
-
- if (((processor_id & 15) >= 4) || machine_is_roadrunner())
- return 1;
-
- return 0;
-}
-
-#define arch_is_coherent() __ixp23xx_arch_is_coherent()
+#define arch_is_coherent() 1
#endif
diff --git a/include/asm-arm/arch-s3c2410/anubis-cpld.h b/include/asm-arm/arch-s3c2410/anubis-cpld.h
index 40e8e27..dcebf6d 100644
--- a/include/asm-arm/arch-s3c2410/anubis-cpld.h
+++ b/include/asm-arm/arch-s3c2410/anubis-cpld.h
@@ -1,6 +1,6 @@
/* linux/include/asm-arm/arch-s3c2410/anubis-cpld.h
*
- * (c) 2005 Simtec Electronics
+ * Copyright (c) 2005 Simtec Electronics
* http://www.simtec.co.uk/products/
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/include/asm-arm/arch-s3c2410/anubis-irq.h b/include/asm-arm/arch-s3c2410/anubis-irq.h
index 4b5f423..cd77a70 100644
--- a/include/asm-arm/arch-s3c2410/anubis-irq.h
+++ b/include/asm-arm/arch-s3c2410/anubis-irq.h
@@ -1,6 +1,6 @@
/* linux/include/asm-arm/arch-s3c2410/anubis-irq.h
*
- * (c) 2005 Simtec Electronics
+ * Copyright (c) 2005 Simtec Electronics
* http://www.simtec.co.uk/products/
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/include/asm-arm/arch-s3c2410/anubis-map.h b/include/asm-arm/arch-s3c2410/anubis-map.h
index 058a210..ab076de 100644
--- a/include/asm-arm/arch-s3c2410/anubis-map.h
+++ b/include/asm-arm/arch-s3c2410/anubis-map.h
@@ -1,6 +1,6 @@
/* linux/include/asm-arm/arch-s3c2410/anubis-map.h
*
- * (c) 2005 Simtec Electronics
+ * Copyright (c) 2005 Simtec Electronics
* http://www.simtec.co.uk/products/
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/include/asm-arm/arch-s3c2410/audio.h b/include/asm-arm/arch-s3c2410/audio.h
index 7e02222..65e0acf 100644
--- a/include/asm-arm/arch-s3c2410/audio.h
+++ b/include/asm-arm/arch-s3c2410/audio.h
@@ -1,6 +1,6 @@
/* linux/include/asm-arm/arch-s3c2410/audio.h
*
- * (c) 2004-2005 Simtec Electronics
+ * Copyright (c) 2004-2005 Simtec Electronics
* http://www.simtec.co.uk/products/SWLINUX/
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/include/asm-arm/arch-s3c2410/bast-cpld.h b/include/asm-arm/arch-s3c2410/bast-cpld.h
index 8969cff..034d2c5 100644
--- a/include/asm-arm/arch-s3c2410/bast-cpld.h
+++ b/include/asm-arm/arch-s3c2410/bast-cpld.h
@@ -1,7 +1,7 @@
/* linux/include/asm-arm/arch-s3c2410/bast-cpld.h
*
- * (c) 2003,2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* BAST - CPLD control constants
*
diff --git a/include/asm-arm/arch-s3c2410/bast-irq.h b/include/asm-arm/arch-s3c2410/bast-irq.h
index 15ffa66f..726c046 100644
--- a/include/asm-arm/arch-s3c2410/bast-irq.h
+++ b/include/asm-arm/arch-s3c2410/bast-irq.h
@@ -1,7 +1,7 @@
/* linux/include/asm-arm/arch-s3c2410/bast-irq.h
*
- * (c) 2003,2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* Machine BAST - IRQ Number definitions
*
diff --git a/include/asm-arm/arch-s3c2410/bast-map.h b/include/asm-arm/arch-s3c2410/bast-map.h
index 727cef8..86ac1c1 100644
--- a/include/asm-arm/arch-s3c2410/bast-map.h
+++ b/include/asm-arm/arch-s3c2410/bast-map.h
@@ -1,7 +1,7 @@
/* linux/include/asm-arm/arch-s3c2410/bast-map.h
*
- * (c) 2003,2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* Machine BAST - Memory map definitions
*
diff --git a/include/asm-arm/arch-s3c2410/bast-pmu.h b/include/asm-arm/arch-s3c2410/bast-pmu.h
index 8283602..37a11fe5 100644
--- a/include/asm-arm/arch-s3c2410/bast-pmu.h
+++ b/include/asm-arm/arch-s3c2410/bast-pmu.h
@@ -1,6 +1,6 @@
/* linux/include/asm-arm/arch-s3c2410/bast-pmu.h
*
- * (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003,2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* Vincent Sanders <vince@simtec.co.uk>
*
diff --git a/include/asm-arm/arch-s3c2410/h1940-latch.h b/include/asm-arm/arch-s3c2410/h1940-latch.h
index c580241..c3de5ab 100644
--- a/include/asm-arm/arch-s3c2410/h1940-latch.h
+++ b/include/asm-arm/arch-s3c2410/h1940-latch.h
@@ -1,6 +1,6 @@
/* linux/include/asm-arm/arch-s3c2410/h1940-latch.h
*
- * (c) 2005 Simtec Electronics
+ * Copyright (c) 2005 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
@@ -16,7 +16,7 @@
#ifndef __ASSEMBLY__
-#define H1940_LATCH ((void __iomem *)0xF8000000)
+#define H1940_LATCH ((void __force __iomem *)0xF8000000)
#else
#define H1940_LATCH 0xF8000000
#endif
diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h
index 871f8af..729565e 100644
--- a/include/asm-arm/arch-s3c2410/hardware.h
+++ b/include/asm-arm/arch-s3c2410/hardware.h
@@ -1,7 +1,7 @@
/* linux/include/asm-arm/arch-s3c2410/hardware.h
*
- * (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - hardware
*
diff --git a/include/asm-arm/arch-s3c2410/iic.h b/include/asm-arm/arch-s3c2410/iic.h
index ed3d6c7..71211c8 100644
--- a/include/asm-arm/arch-s3c2410/iic.h
+++ b/include/asm-arm/arch-s3c2410/iic.h
@@ -1,6 +1,6 @@
/* linux/include/asm-arm/arch-s3c2410/iic.h
*
- * (c) 2004 Simtec Electronics
+ * Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - I2C Controller platfrom_device info
diff --git a/include/asm-arm/arch-s3c2410/leds-gpio.h b/include/asm-arm/arch-s3c2410/leds-gpio.h
index f07ed04..800846e 100644
--- a/include/asm-arm/arch-s3c2410/leds-gpio.h
+++ b/include/asm-arm/arch-s3c2410/leds-gpio.h
@@ -1,6 +1,6 @@
/* linux/include/asm-arm/arch-s3c2410/leds-gpio.h
*
- * (c) 2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h
index 7895042..4505aef 100644
--- a/include/asm-arm/arch-s3c2410/map.h
+++ b/include/asm-arm/arch-s3c2410/map.h
@@ -1,7 +1,7 @@
/* linux/include/asm-arm/arch-s3c2410/map.h
*
- * (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - Memory map definitions
*
@@ -25,7 +25,7 @@
*/
#ifndef __ASSEMBLY__
-#define S3C2410_ADDR(x) ((void __iomem *)0xF0000000 + (x))
+#define S3C2410_ADDR(x) ((void __iomem __force *)0xF0000000 + (x))
#else
#define S3C2410_ADDR(x) (0xF0000000 + (x))
#endif
@@ -47,73 +47,65 @@
#define S3C24XX_SZ_MEMCTRL SZ_1M
/* USB host controller */
-#define S3C24XX_VA_USBHOST S3C2410_ADDR(0x00200000)
#define S3C2400_PA_USBHOST (0x14200000)
#define S3C2410_PA_USBHOST (0x49000000)
#define S3C24XX_SZ_USBHOST SZ_1M
/* DMA controller */
-#define S3C24XX_VA_DMA S3C2410_ADDR(0x00300000)
#define S3C2400_PA_DMA (0x14600000)
#define S3C2410_PA_DMA (0x4B000000)
#define S3C24XX_SZ_DMA SZ_1M
/* Clock and Power management */
-#define S3C24XX_VA_CLKPWR S3C2410_ADDR(0x00400000)
+#define S3C24XX_VA_CLKPWR S3C2410_ADDR(0x00200000)
#define S3C2400_PA_CLKPWR (0x14800000)
#define S3C2410_PA_CLKPWR (0x4C000000)
#define S3C24XX_SZ_CLKPWR SZ_1M
/* LCD controller */
-#define S3C24XX_VA_LCD S3C2410_ADDR(0x00600000)
+#define S3C24XX_VA_LCD S3C2410_ADDR(0x00300000)
#define S3C2400_PA_LCD (0x14A00000)
#define S3C2410_PA_LCD (0x4D000000)
#define S3C24XX_SZ_LCD SZ_1M
/* NAND flash controller */
-#define S3C24XX_VA_NAND S3C2410_ADDR(0x00700000)
#define S3C2410_PA_NAND (0x4E000000)
#define S3C24XX_SZ_NAND SZ_1M
/* MMC controller - available on the S3C2400 */
-#define S3C2400_VA_MMC S3C2400_ADDR(0x00700000)
#define S3C2400_PA_MMC (0x15A00000)
#define S3C2400_SZ_MMC SZ_1M
/* UARTs */
-#define S3C24XX_VA_UART S3C2410_ADDR(0x00800000)
+#define S3C24XX_VA_UART S3C2410_ADDR(0x00400000)
#define S3C2400_PA_UART (0x15000000)
#define S3C2410_PA_UART (0x50000000)
#define S3C24XX_SZ_UART SZ_1M
/* Timers */
-#define S3C24XX_VA_TIMER S3C2410_ADDR(0x00900000)
+#define S3C24XX_VA_TIMER S3C2410_ADDR(0x00500000)
#define S3C2400_PA_TIMER (0x15100000)
#define S3C2410_PA_TIMER (0x51000000)
#define S3C24XX_SZ_TIMER SZ_1M
/* USB Device port */
-#define S3C24XX_VA_USBDEV S3C2410_ADDR(0x00A00000)
+#define S3C24XX_VA_USBDEV S3C2410_ADDR(0x00600000)
#define S3C2400_PA_USBDEV (0x15200140)
#define S3C2410_PA_USBDEV (0x52000000)
#define S3C24XX_SZ_USBDEV SZ_1M
/* Watchdog */
-#define S3C24XX_VA_WATCHDOG S3C2410_ADDR(0x00B00000)
+#define S3C24XX_VA_WATCHDOG S3C2410_ADDR(0x00700000)
#define S3C2400_PA_WATCHDOG (0x15300000)
#define S3C2410_PA_WATCHDOG (0x53000000)
#define S3C24XX_SZ_WATCHDOG SZ_1M
/* IIC hardware controller */
-#define S3C24XX_VA_IIC S3C2410_ADDR(0x00C00000)
#define S3C2400_PA_IIC (0x15400000)
#define S3C2410_PA_IIC (0x54000000)
#define S3C24XX_SZ_IIC SZ_1M
-#define VA_IIC_BASE (S3C24XX_VA_IIC)
-
/* IIS controller */
-#define S3C24XX_VA_IIS S3C2410_ADDR(0x00D00000)
#define S3C2400_PA_IIS (0x15508000)
#define S3C2410_PA_IIS (0x55000000)
#define S3C24XX_SZ_IIS SZ_1M
@@ -134,25 +126,21 @@
#define S3C24XX_SZ_GPIO SZ_1M
/* RTC */
-#define S3C24XX_VA_RTC S3C2410_ADDR(0x00F00000)
#define S3C2400_PA_RTC (0x15700040)
#define S3C2410_PA_RTC (0x57000000)
#define S3C24XX_SZ_RTC SZ_1M
/* ADC */
-#define S3C24XX_VA_ADC S3C2410_ADDR(0x01000000)
#define S3C2400_PA_ADC (0x15800000)
#define S3C2410_PA_ADC (0x58000000)
#define S3C24XX_SZ_ADC SZ_1M
/* SPI */
-#define S3C24XX_VA_SPI S3C2410_ADDR(0x01100000)
#define S3C2400_PA_SPI (0x15900000)
#define S3C2410_PA_SPI (0x59000000)
#define S3C24XX_SZ_SPI SZ_1M
/* SDI */
-#define S3C24XX_VA_SDI S3C2410_ADDR(0x01200000)
#define S3C2410_PA_SDI (0x5A000000)
#define S3C24XX_SZ_SDI SZ_1M
diff --git a/include/asm-arm/arch-s3c2410/nand.h b/include/asm-arm/arch-s3c2410/nand.h
index e350ae2..8816f7f 100644
--- a/include/asm-arm/arch-s3c2410/nand.h
+++ b/include/asm-arm/arch-s3c2410/nand.h
@@ -1,7 +1,7 @@
/* linux/include/asm-arm/arch-s3c2410/nand.h
*
- * (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - NAND device controller platfrom_device info
*
diff --git a/include/asm-arm/arch-s3c2410/osiris-cpld.h b/include/asm-arm/arch-s3c2410/osiris-cpld.h
index e9d1ae1..3b64984 100644
--- a/include/asm-arm/arch-s3c2410/osiris-cpld.h
+++ b/include/asm-arm/arch-s3c2410/osiris-cpld.h
@@ -1,6 +1,6 @@
/* linux/include/asm-arm/arch-s3c2410/osiris-cpld.h
*
- * (c) 2005 Simtec Electronics
+ * Copyright (c) 2005 Simtec Electronics
* http://www.simtec.co.uk/products/
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/include/asm-arm/arch-s3c2410/regs-serial.h b/include/asm-arm/arch-s3c2410/regs-serial.h
index 19c77da..46f5240 100644
--- a/include/asm-arm/arch-s3c2410/regs-serial.h
+++ b/include/asm-arm/arch-s3c2410/regs-serial.h
@@ -197,7 +197,7 @@
unsigned char hwport; /* hardware port number */
unsigned char unused;
unsigned short flags;
- unsigned long uart_flags; /* default uart flags */
+ upf_t uart_flags; /* default uart flags */
unsigned long ucon; /* value of ucon for port */
unsigned long ulcon; /* value of ulcon for port */
diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h
index 4f72a85..ecf250d 100644
--- a/include/asm-arm/arch-s3c2410/system.h
+++ b/include/asm-arm/arch-s3c2410/system.h
@@ -1,7 +1,7 @@
/* linux/include/asm-arm/arch-s3c2410/system.h
*
- * (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - System function defines and includes
*
diff --git a/include/asm-arm/arch-s3c2410/timex.h b/include/asm-arm/arch-s3c2410/timex.h
index 703c337..c16a99c 100644
--- a/include/asm-arm/arch-s3c2410/timex.h
+++ b/include/asm-arm/arch-s3c2410/timex.h
@@ -1,7 +1,7 @@
/* linux/include/asm-arm/arch-s3c2410/timex.h
*
- * (c) 2003-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - time parameters
*
diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h
index 81b3e91..dcb2cef 100644
--- a/include/asm-arm/arch-s3c2410/uncompress.h
+++ b/include/asm-arm/arch-s3c2410/uncompress.h
@@ -1,7 +1,7 @@
/* linux/include/asm-arm/arch-s3c2410/uncompress.h
*
- * (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - uncompress code
*
@@ -13,6 +13,7 @@
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
+typedef unsigned int upf_t; /* cannot include linux/serial_core.h */
/* defines for UART registers */
#include "asm/arch/regs-serial.h"
diff --git a/include/asm-arm/arch-s3c2410/usb-control.h b/include/asm-arm/arch-s3c2410/usb-control.h
index 35723569..5bfa376 100644
--- a/include/asm-arm/arch-s3c2410/usb-control.h
+++ b/include/asm-arm/arch-s3c2410/usb-control.h
@@ -1,7 +1,7 @@
/* linux/include/asm-arm/arch-s3c2410/usb-control.h
*
- * (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - usb port information
*
diff --git a/include/asm-arm/arch-s3c2410/vr1000-cpld.h b/include/asm-arm/arch-s3c2410/vr1000-cpld.h
index a341b1e1..0557b0a 100644
--- a/include/asm-arm/arch-s3c2410/vr1000-cpld.h
+++ b/include/asm-arm/arch-s3c2410/vr1000-cpld.h
@@ -1,7 +1,7 @@
/* linux/include/asm-arm/arch-s3c2410/vr1000-cpld.h
*
- * (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* VR1000 - CPLD control constants
*
diff --git a/include/asm-arm/arch-s3c2410/vr1000-irq.h b/include/asm-arm/arch-s3c2410/vr1000-irq.h
index c39a0ff..8909370 100644
--- a/include/asm-arm/arch-s3c2410/vr1000-irq.h
+++ b/include/asm-arm/arch-s3c2410/vr1000-irq.h
@@ -1,7 +1,7 @@
/* linux/include/asm-arm/arch-s3c2410/vr1000-irq.h
*
- * (c) 2003,2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* Machine VR1000 - IRQ Number definitions
*
diff --git a/include/asm-arm/arch-s3c2410/vr1000-map.h b/include/asm-arm/arch-s3c2410/vr1000-map.h
index 1fe4db3..92a56a7 100644
--- a/include/asm-arm/arch-s3c2410/vr1000-map.h
+++ b/include/asm-arm/arch-s3c2410/vr1000-map.h
@@ -1,7 +1,7 @@
/* linux/include/asm-arm/arch-s3c2410/vr1000-map.h
*
- * (c) 2003-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* Machine VR1000 - Memory map definitions
*
diff --git a/include/asm-arm/elf.h b/include/asm-arm/elf.h
index 642382d..3679a8a 100644
--- a/include/asm-arm/elf.h
+++ b/include/asm-arm/elf.h
@@ -52,6 +52,7 @@
#define HWCAP_EDSP 128
#define HWCAP_JAVA 256
#define HWCAP_IWMMXT 512
+#define HWCAP_CRUNCH 1024
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
index e160aeb..aa223fc 100644
--- a/include/asm-arm/system.h
+++ b/include/asm-arm/system.h
@@ -73,6 +73,7 @@
#ifndef __ASSEMBLY__
#include <linux/linkage.h>
+#include <linux/irqflags.h>
struct thread_info;
struct task_struct;
@@ -139,6 +140,9 @@
#define cpu_is_xscale() 1
#endif
+extern unsigned long cr_no_alignment; /* defined in entry-armv.S */
+extern unsigned long cr_alignment; /* defined in entry-armv.S */
+
static inline unsigned int get_cr(void)
{
unsigned int val;
@@ -152,6 +156,10 @@
: : "r" (val) : "cc");
}
+#ifndef CONFIG_SMP
+extern void adjust_cr(unsigned long mask, unsigned long set);
+#endif
+
#define CPACC_FULL(n) (3 << (n * 2))
#define CPACC_SVC(n) (1 << (n * 2))
#define CPACC_DISABLE(n) (0 << (n * 2))
@@ -170,29 +178,6 @@
: : "r" (val) : "cc");
}
-extern unsigned long cr_no_alignment; /* defined in entry-armv.S */
-extern unsigned long cr_alignment; /* defined in entry-armv.S */
-
-#ifndef CONFIG_SMP
-static inline void adjust_cr(unsigned long mask, unsigned long set)
-{
- unsigned long flags, cr;
-
- mask &= ~CR_A;
-
- set &= mask;
-
- local_irq_save(flags);
-
- cr_no_alignment = (cr_no_alignment & ~mask) | set;
- cr_alignment = (cr_alignment & ~mask) | set;
-
- set_cr((get_cr() & ~mask) | set);
-
- local_irq_restore(flags);
-}
-#endif
-
#define UDBG_UNDEFINED (1 << 0)
#define UDBG_SYSCALL (1 << 1)
#define UDBG_BADABORT (1 << 2)
@@ -248,8 +233,6 @@
{
}
-#include <linux/irqflags.h>
-
#ifdef CONFIG_SMP
#define smp_mb() mb()
diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h
index 32b06eb..97e7060 100644
--- a/include/asm-arm/unistd.h
+++ b/include/asm-arm/unistd.h
@@ -360,6 +360,18 @@
#define __NR_readlinkat (__NR_SYSCALL_BASE+332)
#define __NR_fchmodat (__NR_SYSCALL_BASE+333)
#define __NR_faccessat (__NR_SYSCALL_BASE+334)
+ /* 335 for pselect6 */
+ /* 336 for ppoll */
+#define __NR_unshare (__NR_SYSCALL_BASE+337)
+#define __NR_set_robust_list (__NR_SYSCALL_BASE+338)
+#define __NR_get_robust_list (__NR_SYSCALL_BASE+339)
+#define __NR_splice (__NR_SYSCALL_BASE+340)
+#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE+341)
+#define __NR_tee (__NR_SYSCALL_BASE+342)
+#define __NR_vmsplice (__NR_SYSCALL_BASE+343)
+#define __NR_move_pages (__NR_SYSCALL_BASE+344)
+#define __NR_getcpu (__NR_SYSCALL_BASE+345)
+ /* 346 for epoll_pwait */
/*
* The following SWIs are ARM private.
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 7437cca..9fcc8d9 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -35,6 +35,9 @@
VMLINUX_SYMBOL(__start_pci_fixups_enable) = .; \
*(.pci_fixup_enable) \
VMLINUX_SYMBOL(__end_pci_fixups_enable) = .; \
+ VMLINUX_SYMBOL(__start_pci_fixups_resume) = .; \
+ *(.pci_fixup_resume) \
+ VMLINUX_SYMBOL(__end_pci_fixups_resume) = .; \
} \
\
/* RapidIO route ops */ \
@@ -119,8 +122,6 @@
*(__ksymtab_strings) \
} \
\
- EH_FRAME \
- \
/* Built-in module parameters. */ \
__param : AT(ADDR(__param) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___param) = .; \
@@ -160,26 +161,6 @@
*(.kprobes.text) \
VMLINUX_SYMBOL(__kprobes_text_end) = .;
-#ifdef CONFIG_STACK_UNWIND
-#define EH_FRAME \
- /* Unwind data binary search table */ \
- . = ALIGN(8); \
- .eh_frame_hdr : AT(ADDR(.eh_frame_hdr) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start_unwind_hdr) = .; \
- *(.eh_frame_hdr) \
- VMLINUX_SYMBOL(__end_unwind_hdr) = .; \
- } \
- /* Unwind data */ \
- . = ALIGN(8); \
- .eh_frame : AT(ADDR(.eh_frame) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start_unwind) = .; \
- *(.eh_frame) \
- VMLINUX_SYMBOL(__end_unwind) = .; \
- }
-#else
-#define EH_FRAME
-#endif
-
/* DWARF debug sections.
Symbols in the DWARF debugging sections are relative to
the beginning of the section so we begin them at 0. */
diff --git a/include/asm-i386/unwind.h b/include/asm-i386/unwind.h
index aa2c931..43c70c3 100644
--- a/include/asm-i386/unwind.h
+++ b/include/asm-i386/unwind.h
@@ -1,95 +1,6 @@
#ifndef _ASM_I386_UNWIND_H
#define _ASM_I386_UNWIND_H
-/*
- * Copyright (C) 2002-2006 Novell, Inc.
- * Jan Beulich <jbeulich@novell.com>
- * This code is released under version 2 of the GNU GPL.
- */
-
-#ifdef CONFIG_STACK_UNWIND
-
-#include <linux/sched.h>
-#include <asm/fixmap.h>
-#include <asm/ptrace.h>
-#include <asm/uaccess.h>
-
-struct unwind_frame_info
-{
- struct pt_regs regs;
- struct task_struct *task;
- unsigned call_frame:1;
-};
-
-#define UNW_PC(frame) (frame)->regs.eip
-#define UNW_SP(frame) (frame)->regs.esp
-#ifdef CONFIG_FRAME_POINTER
-#define UNW_FP(frame) (frame)->regs.ebp
-#define FRAME_RETADDR_OFFSET 4
-#define FRAME_LINK_OFFSET 0
-#define STACK_BOTTOM(tsk) STACK_LIMIT((tsk)->thread.esp0)
-#define STACK_TOP(tsk) ((tsk)->thread.esp0)
-#else
-#define UNW_FP(frame) ((void)(frame), 0)
-#endif
-#define STACK_LIMIT(ptr) (((ptr) - 1) & ~(THREAD_SIZE - 1))
-
-#define UNW_REGISTER_INFO \
- PTREGS_INFO(eax), \
- PTREGS_INFO(ecx), \
- PTREGS_INFO(edx), \
- PTREGS_INFO(ebx), \
- PTREGS_INFO(esp), \
- PTREGS_INFO(ebp), \
- PTREGS_INFO(esi), \
- PTREGS_INFO(edi), \
- PTREGS_INFO(eip)
-
-#define UNW_DEFAULT_RA(raItem, dataAlign) \
- ((raItem).where == Memory && \
- !((raItem).value * (dataAlign) + 4))
-
-static inline void arch_unw_init_frame_info(struct unwind_frame_info *info,
- /*const*/ struct pt_regs *regs)
-{
- if (user_mode_vm(regs))
- info->regs = *regs;
- else {
- memcpy(&info->regs, regs, offsetof(struct pt_regs, esp));
- info->regs.esp = (unsigned long)®s->esp;
- info->regs.xss = __KERNEL_DS;
- }
-}
-
-static inline void arch_unw_init_blocked(struct unwind_frame_info *info)
-{
- memset(&info->regs, 0, sizeof(info->regs));
- info->regs.eip = info->task->thread.eip;
- info->regs.xcs = __KERNEL_CS;
- __get_user(info->regs.ebp, (long *)info->task->thread.esp);
- info->regs.esp = info->task->thread.esp;
- info->regs.xss = __KERNEL_DS;
- info->regs.xds = __USER_DS;
- info->regs.xes = __USER_DS;
- info->regs.xgs = __KERNEL_PDA;
-}
-
-extern asmlinkage int arch_unwind_init_running(struct unwind_frame_info *,
- asmlinkage int (*callback)(struct unwind_frame_info *,
- void *arg),
- void *arg);
-
-static inline int arch_unw_user_mode(/*const*/ struct unwind_frame_info *info)
-{
- return user_mode_vm(&info->regs)
- || info->regs.eip < PAGE_OFFSET
- || (info->regs.eip >= __fix_to_virt(FIX_VDSO)
- && info->regs.eip < __fix_to_virt(FIX_VDSO) + PAGE_SIZE)
- || info->regs.esp < PAGE_OFFSET;
-}
-
-#else
-
#define UNW_PC(frame) ((void)(frame), 0)
#define UNW_SP(frame) ((void)(frame), 0)
#define UNW_FP(frame) ((void)(frame), 0)
@@ -99,6 +10,4 @@
return 0;
}
-#endif
-
#endif /* _ASM_I386_UNWIND_H */
diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h
index fdad426..3d90264 100644
--- a/include/asm-powerpc/spu.h
+++ b/include/asm-powerpc/spu.h
@@ -161,6 +161,7 @@
extern long spu_sys_callback(struct spu_syscall_block *s);
/* syscalls implemented in spufs */
+struct file;
extern struct spufs_calls {
asmlinkage long (*create_thread)(const char __user *name,
unsigned int flags, mode_t mode);
@@ -232,6 +233,7 @@
* to object-id spufs file from user space and the notifer
* function can assume that spu->ctx is valid.
*/
+struct notifier_block;
int spu_switch_event_register(struct notifier_block * n);
int spu_switch_event_unregister(struct notifier_block * n);
diff --git a/include/asm-s390/qdio.h b/include/asm-s390/qdio.h
index 7189c79..127f72e 100644
--- a/include/asm-s390/qdio.h
+++ b/include/asm-s390/qdio.h
@@ -34,6 +34,7 @@
#define QDIO_QETH_QFMT 0
#define QDIO_ZFCP_QFMT 1
#define QDIO_IQDIO_QFMT 2
+#define QDIO_IQDIO_QFMT_ASYNCH 3
struct qdio_buffer_element{
unsigned int flags;
diff --git a/include/asm-s390/reset.h b/include/asm-s390/reset.h
index 9b439cf..532e65a 100644
--- a/include/asm-s390/reset.h
+++ b/include/asm-s390/reset.h
@@ -19,5 +19,6 @@
extern void unregister_reset_call(struct reset_call *reset);
extern void s390_reset_system(void);
extern void (*s390_reset_mcck_handler)(void);
+extern void (*s390_reset_pgm_handler)(void);
#endif /* _ASM_S390_RESET_H */
diff --git a/include/asm-sparc/bitops.h b/include/asm-sparc/bitops.h
index 04aa331..329e696 100644
--- a/include/asm-sparc/bitops.h
+++ b/include/asm-sparc/bitops.h
@@ -14,6 +14,10 @@
#ifdef __KERNEL__
+extern unsigned long ___set_bit(unsigned long *addr, unsigned long mask);
+extern unsigned long ___clear_bit(unsigned long *addr, unsigned long mask);
+extern unsigned long ___change_bit(unsigned long *addr, unsigned long mask);
+
/*
* Set bit 'nr' in 32-bit quantity at address 'addr' where bit '0'
* is in the highest of the four bytes and bit '31' is the high bit
@@ -22,134 +26,62 @@
*/
static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
{
- register unsigned long mask asm("g2");
- register unsigned long *ADDR asm("g1");
- register int tmp1 asm("g3");
- register int tmp2 asm("g4");
- register int tmp3 asm("g5");
- register int tmp4 asm("g7");
+ unsigned long *ADDR, mask;
ADDR = ((unsigned long *) addr) + (nr >> 5);
mask = 1 << (nr & 31);
- __asm__ __volatile__(
- "mov %%o7, %%g4\n\t"
- "call ___set_bit\n\t"
- " add %%o7, 8, %%o7\n"
- : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
- : "0" (mask), "r" (ADDR)
- : "memory", "cc");
-
- return mask != 0;
+ return ___set_bit(ADDR, mask) != 0;
}
static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
{
- register unsigned long mask asm("g2");
- register unsigned long *ADDR asm("g1");
- register int tmp1 asm("g3");
- register int tmp2 asm("g4");
- register int tmp3 asm("g5");
- register int tmp4 asm("g7");
+ unsigned long *ADDR, mask;
ADDR = ((unsigned long *) addr) + (nr >> 5);
mask = 1 << (nr & 31);
- __asm__ __volatile__(
- "mov %%o7, %%g4\n\t"
- "call ___set_bit\n\t"
- " add %%o7, 8, %%o7\n"
- : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
- : "0" (mask), "r" (ADDR)
- : "memory", "cc");
+ (void) ___set_bit(ADDR, mask);
}
static inline int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
{
- register unsigned long mask asm("g2");
- register unsigned long *ADDR asm("g1");
- register int tmp1 asm("g3");
- register int tmp2 asm("g4");
- register int tmp3 asm("g5");
- register int tmp4 asm("g7");
+ unsigned long *ADDR, mask;
ADDR = ((unsigned long *) addr) + (nr >> 5);
mask = 1 << (nr & 31);
- __asm__ __volatile__(
- "mov %%o7, %%g4\n\t"
- "call ___clear_bit\n\t"
- " add %%o7, 8, %%o7\n"
- : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
- : "0" (mask), "r" (ADDR)
- : "memory", "cc");
-
- return mask != 0;
+ return ___clear_bit(ADDR, mask) != 0;
}
static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
{
- register unsigned long mask asm("g2");
- register unsigned long *ADDR asm("g1");
- register int tmp1 asm("g3");
- register int tmp2 asm("g4");
- register int tmp3 asm("g5");
- register int tmp4 asm("g7");
+ unsigned long *ADDR, mask;
ADDR = ((unsigned long *) addr) + (nr >> 5);
mask = 1 << (nr & 31);
- __asm__ __volatile__(
- "mov %%o7, %%g4\n\t"
- "call ___clear_bit\n\t"
- " add %%o7, 8, %%o7\n"
- : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
- : "0" (mask), "r" (ADDR)
- : "memory", "cc");
+ (void) ___clear_bit(ADDR, mask);
}
static inline int test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
{
- register unsigned long mask asm("g2");
- register unsigned long *ADDR asm("g1");
- register int tmp1 asm("g3");
- register int tmp2 asm("g4");
- register int tmp3 asm("g5");
- register int tmp4 asm("g7");
+ unsigned long *ADDR, mask;
ADDR = ((unsigned long *) addr) + (nr >> 5);
mask = 1 << (nr & 31);
- __asm__ __volatile__(
- "mov %%o7, %%g4\n\t"
- "call ___change_bit\n\t"
- " add %%o7, 8, %%o7\n"
- : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
- : "0" (mask), "r" (ADDR)
- : "memory", "cc");
-
- return mask != 0;
+ return ___change_bit(ADDR, mask) != 0;
}
static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
{
- register unsigned long mask asm("g2");
- register unsigned long *ADDR asm("g1");
- register int tmp1 asm("g3");
- register int tmp2 asm("g4");
- register int tmp3 asm("g5");
- register int tmp4 asm("g7");
+ unsigned long *ADDR, mask;
ADDR = ((unsigned long *) addr) + (nr >> 5);
mask = 1 << (nr & 31);
- __asm__ __volatile__(
- "mov %%o7, %%g4\n\t"
- "call ___change_bit\n\t"
- " add %%o7, 8, %%o7\n"
- : "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
- : "0" (mask), "r" (ADDR)
- : "memory", "cc");
+ (void) ___change_bit(ADDR, mask);
}
#include <asm-generic/bitops/non-atomic.h>
diff --git a/include/asm-sparc64/hw_irq.h b/include/asm-sparc64/hw_irq.h
index 599b3b0..8e44a83 100644
--- a/include/asm-sparc64/hw_irq.h
+++ b/include/asm-sparc64/hw_irq.h
@@ -1,6 +1,4 @@
#ifndef __ASM_SPARC64_HW_IRQ_H
#define __ASM_SPARC64_HW_IRQ_H
-extern void hw_resend_irq(struct hw_interrupt_type *handler, unsigned int virt_irq);
-
#endif
diff --git a/include/asm-sparc64/percpu.h b/include/asm-sparc64/percpu.h
index ced8cbd..0d3df76 100644
--- a/include/asm-sparc64/percpu.h
+++ b/include/asm-sparc64/percpu.h
@@ -5,6 +5,16 @@
#ifdef CONFIG_SMP
+#ifdef CONFIG_MODULES
+# define PERCPU_MODULE_RESERVE 8192
+#else
+# define PERCPU_MODULE_RESERVE 0
+#endif
+
+#define PERCPU_ENOUGH_ROOM \
+ (ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES) + \
+ PERCPU_MODULE_RESERVE)
+
extern void setup_per_cpu_areas(void);
extern unsigned long __per_cpu_base;
diff --git a/include/asm-x86_64/unwind.h b/include/asm-x86_64/unwind.h
index 2f6349e..02710f6 100644
--- a/include/asm-x86_64/unwind.h
+++ b/include/asm-x86_64/unwind.h
@@ -1,100 +1,6 @@
#ifndef _ASM_X86_64_UNWIND_H
#define _ASM_X86_64_UNWIND_H
-/*
- * Copyright (C) 2002-2006 Novell, Inc.
- * Jan Beulich <jbeulich@novell.com>
- * This code is released under version 2 of the GNU GPL.
- */
-
-#ifdef CONFIG_STACK_UNWIND
-
-#include <linux/sched.h>
-#include <asm/ptrace.h>
-#include <asm/uaccess.h>
-#include <asm/vsyscall.h>
-
-struct unwind_frame_info
-{
- struct pt_regs regs;
- struct task_struct *task;
- unsigned call_frame:1;
-};
-
-#define UNW_PC(frame) (frame)->regs.rip
-#define UNW_SP(frame) (frame)->regs.rsp
-#ifdef CONFIG_FRAME_POINTER
-#define UNW_FP(frame) (frame)->regs.rbp
-#define FRAME_RETADDR_OFFSET 8
-#define FRAME_LINK_OFFSET 0
-#define STACK_BOTTOM(tsk) (((tsk)->thread.rsp0 - 1) & ~(THREAD_SIZE - 1))
-#define STACK_TOP(tsk) ((tsk)->thread.rsp0)
-#endif
-/* Might need to account for the special exception and interrupt handling
- stacks here, since normally
- EXCEPTION_STACK_ORDER < THREAD_ORDER < IRQSTACK_ORDER,
- but the construct is needed only for getting across the stack switch to
- the interrupt stack - thus considering the IRQ stack itself is unnecessary,
- and the overhead of comparing against all exception handling stacks seems
- not desirable. */
-#define STACK_LIMIT(ptr) (((ptr) - 1) & ~(THREAD_SIZE - 1))
-
-#define UNW_REGISTER_INFO \
- PTREGS_INFO(rax), \
- PTREGS_INFO(rdx), \
- PTREGS_INFO(rcx), \
- PTREGS_INFO(rbx), \
- PTREGS_INFO(rsi), \
- PTREGS_INFO(rdi), \
- PTREGS_INFO(rbp), \
- PTREGS_INFO(rsp), \
- PTREGS_INFO(r8), \
- PTREGS_INFO(r9), \
- PTREGS_INFO(r10), \
- PTREGS_INFO(r11), \
- PTREGS_INFO(r12), \
- PTREGS_INFO(r13), \
- PTREGS_INFO(r14), \
- PTREGS_INFO(r15), \
- PTREGS_INFO(rip)
-
-#define UNW_DEFAULT_RA(raItem, dataAlign) \
- ((raItem).where == Memory && \
- !((raItem).value * (dataAlign) + 8))
-
-static inline void arch_unw_init_frame_info(struct unwind_frame_info *info,
- /*const*/ struct pt_regs *regs)
-{
- info->regs = *regs;
-}
-
-static inline void arch_unw_init_blocked(struct unwind_frame_info *info)
-{
- extern const char thread_return[];
-
- memset(&info->regs, 0, sizeof(info->regs));
- info->regs.rip = (unsigned long)thread_return;
- info->regs.cs = __KERNEL_CS;
- __get_user(info->regs.rbp, (unsigned long *)info->task->thread.rsp);
- info->regs.rsp = info->task->thread.rsp;
- info->regs.ss = __KERNEL_DS;
-}
-
-extern int arch_unwind_init_running(struct unwind_frame_info *,
- int (*callback)(struct unwind_frame_info *,
- void *arg),
- void *arg);
-
-static inline int arch_unw_user_mode(const struct unwind_frame_info *info)
-{
- return user_mode(&info->regs)
- || (long)info->regs.rip >= 0
- || (info->regs.rip >= VSYSCALL_START && info->regs.rip < VSYSCALL_END)
- || (long)info->regs.rsp >= 0;
-}
-
-#else
-
#define UNW_PC(frame) ((void)(frame), 0UL)
#define UNW_SP(frame) ((void)(frame), 0UL)
@@ -103,6 +9,4 @@
return 0;
}
-#endif
-
#endif /* _ASM_X86_64_UNWIND_H */
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index a1b04d8..68dd42b 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -119,7 +119,6 @@
header-y += nfs_mount.h
header-y += oom.h
header-y += param.h
-header-y += pci_ids.h
header-y += pci_regs.h
header-y += personality.h
header-y += pfkeyv2.h
@@ -162,7 +161,6 @@
header-y += wireless.h
header-y += xattr.h
header-y += x25.h
-header-y += zorro_ids.h
unifdef-y += acct.h
unifdef-y += adb.h
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index ea330d7..36a6eac 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -331,10 +331,6 @@
#include <linux/elevator.h>
-typedef int (merge_request_fn) (request_queue_t *, struct request *,
- struct bio *);
-typedef int (merge_requests_fn) (request_queue_t *, struct request *,
- struct request *);
typedef void (request_fn_proc) (request_queue_t *q);
typedef int (make_request_fn) (request_queue_t *q, struct bio *bio);
typedef int (prep_rq_fn) (request_queue_t *, struct request *);
@@ -376,9 +372,6 @@
struct request_list rq;
request_fn_proc *request_fn;
- merge_request_fn *back_merge_fn;
- merge_request_fn *front_merge_fn;
- merge_requests_fn *merge_requests_fn;
make_request_fn *make_request_fn;
prep_rq_fn *prep_rq_fn;
unplug_fn *unplug_fn;
@@ -649,6 +642,11 @@
struct gendisk *, struct scsi_ioctl_command __user *);
/*
+ * Temporary export, until SCSI gets fixed up.
+ */
+extern int ll_back_merge_fn(request_queue_t *, struct request *, struct bio *);
+
+/*
* A queue has just exitted congestion. Note this in the global counter of
* congested queues, and wake up anyone who was waiting for requests to be
* put back.
@@ -674,7 +672,7 @@
extern void blk_run_queue(request_queue_t *);
extern void blk_start_queueing(request_queue_t *);
extern int blk_rq_map_user(request_queue_t *, struct request *, void __user *, unsigned long);
-extern int blk_rq_unmap_user(struct request *);
+extern int blk_rq_unmap_user(struct bio *);
extern int blk_rq_map_kern(request_queue_t *, struct request *, void *, unsigned int, gfp_t);
extern int blk_rq_map_user_iov(request_queue_t *, struct request *,
struct sg_iovec *, int, unsigned int);
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 3ea1cd5..10eb56b 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -133,7 +133,7 @@
struct cn_callback_entry {
struct list_head callback_entry;
struct cn_callback *cb;
- struct delayed_work work;
+ struct work_struct work;
struct cn_queue_dev *pdev;
struct cn_callback_id id;
diff --git a/include/linux/device.h b/include/linux/device.h
index 49ab53c..f44247f 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -433,6 +433,8 @@
return dev->is_registered;
}
+void driver_init(void);
+
/*
* High level routines for use by the bus drivers
*/
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index a24931d..e88fcbc 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -12,6 +12,8 @@
typedef void (elevator_merged_fn) (request_queue_t *, struct request *, int);
+typedef int (elevator_allow_merge_fn) (request_queue_t *, struct request *, struct bio *);
+
typedef int (elevator_dispatch_fn) (request_queue_t *, int);
typedef void (elevator_add_req_fn) (request_queue_t *, struct request *);
@@ -33,6 +35,7 @@
elevator_merge_fn *elevator_merge_fn;
elevator_merged_fn *elevator_merged_fn;
elevator_merge_req_fn *elevator_merge_req_fn;
+ elevator_allow_merge_fn *elevator_allow_merge_fn;
elevator_dispatch_fn *elevator_dispatch_fn;
elevator_add_req_fn *elevator_add_req_fn;
diff --git a/include/linux/input.h b/include/linux/input.h
index 4e61158..bde65c8 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -491,6 +491,21 @@
#define KEY_DIGITS 0x19d
#define KEY_TEEN 0x19e
#define KEY_TWEN 0x19f
+#define KEY_VIDEOPHONE 0x1a0
+#define KEY_GAMES 0x1a1
+#define KEY_ZOOMIN 0x1a2
+#define KEY_ZOOMOUT 0x1a3
+#define KEY_ZOOMRESET 0x1a4
+#define KEY_WORDPROCESSOR 0x1a5
+#define KEY_EDITOR 0x1a6
+#define KEY_SPREADSHEET 0x1a7
+#define KEY_GRAPHICSEDITOR 0x1a8
+#define KEY_PRESENTATION 0x1a9
+#define KEY_DATABASE 0x1aa
+#define KEY_NEWS 0x1ab
+#define KEY_VOICEMAIL 0x1ac
+#define KEY_ADDRESSBOOK 0x1ad
+#define KEY_MESSENGER 0x1ae
#define KEY_DEL_EOL 0x1c0
#define KEY_DEL_EOS 0x1c1
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index cf8696d..15228d7 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -91,6 +91,9 @@
#define IORESOURCE_ROM_COPY (1<<2) /* ROM is alloc'd copy, resource field overlaid */
#define IORESOURCE_ROM_BIOS_COPY (1<<3) /* ROM is BIOS copy, resource field overlaid */
+/* PCI control bits. Shares IORESOURCE_BITS with above PCI ROM. */
+#define IORESOURCE_PCI_FIXED (1<<4) /* Do not move resource */
+
/* PC/ISA/whatever - the normal PC address spaces: IO and memory */
extern struct resource ioport_resource;
extern struct resource iomem_resource;
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index d1c8d28..76538fc 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -265,8 +265,8 @@
struct subsys_attribute *);
#if defined(CONFIG_HOTPLUG)
-void kobject_uevent(struct kobject *kobj, enum kobject_action action);
-void kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
+int kobject_uevent(struct kobject *kobj, enum kobject_action action);
+int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
char *envp[]);
int add_uevent_var(char **envp, int num_envp, int *cur_index,
@@ -274,11 +274,12 @@
const char *format, ...)
__attribute__((format (printf, 7, 8)));
#else
-static inline void kobject_uevent(struct kobject *kobj, enum kobject_action action) { }
-static inline void kobject_uevent_env(struct kobject *kobj,
+static inline int kobject_uevent(struct kobject *kobj, enum kobject_action action)
+{ return 0; }
+static inline int kobject_uevent_env(struct kobject *kobj,
enum kobject_action action,
char *envp[])
-{ }
+{ return 0; }
static inline int add_uevent_var(char **envp, int num_envp, int *cur_index,
char *buffer, int buffer_size, int *cur_len,
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 01c7072..f3c617e 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -20,9 +20,6 @@
/* Include the pci register defines */
#include <linux/pci_regs.h>
-/* Include the ID list */
-#include <linux/pci_ids.h>
-
/*
* The PCI interface treats multi-function devices as independent
* devices. The slot/function address of each device is encoded
@@ -54,6 +51,9 @@
#include <asm/atomic.h>
#include <linux/device.h>
+/* Include the ID list */
+#include <linux/pci_ids.h>
+
/* File state for mmap()s on /proc/bus/pci/X/Y */
enum pci_mmap_state {
pci_mmap_io,
@@ -396,6 +396,21 @@
*/
#define pci_module_init pci_register_driver
+/**
+ * PCI_VDEVICE - macro used to describe a specific pci device in short form
+ * @vend: the vendor name
+ * @dev: the 16 bit PCI Device ID
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific PCI device. The subvendor, and subdevice fields will be set
+ * to PCI_ANY_ID. The macro allows the next field to follow as the device
+ * private data.
+ */
+
+#define PCI_VDEVICE(vendor, device) \
+ PCI_VENDOR_ID_##vendor, (device), \
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0
+
/* these external functions are only available when PCI support is enabled */
#ifdef CONFIG_PCI
@@ -454,6 +469,8 @@
int pci_find_capability (struct pci_dev *dev, int cap);
int pci_find_next_capability (struct pci_dev *dev, u8 pos, int cap);
int pci_find_ext_capability (struct pci_dev *dev, int cap);
+int pci_find_ht_capability (struct pci_dev *dev, int ht_cap);
+int pci_find_next_ht_capability (struct pci_dev *dev, int pos, int ht_cap);
struct pci_bus *pci_find_next_bus(const struct pci_bus *from);
struct pci_dev *pci_get_device(unsigned int vendor, unsigned int device,
@@ -468,6 +485,7 @@
struct pci_dev *pci_get_bus_and_slot (unsigned int bus, unsigned int devfn);
struct pci_dev *pci_get_class (unsigned int class, struct pci_dev *from);
int pci_dev_present(const struct pci_device_id *ids);
+const struct pci_device_id *pci_find_present(const struct pci_device_id *ids);
int pci_bus_read_config_byte (struct pci_bus *bus, unsigned int devfn, int where, u8 *val);
int pci_bus_read_config_word (struct pci_bus *bus, unsigned int devfn, int where, u16 *val);
@@ -681,6 +699,7 @@
{ return NULL; }
#define pci_dev_present(ids) (0)
+#define pci_find_present(ids) (NULL)
#define pci_dev_put(dev) do { } while (0)
static inline void pci_set_master(struct pci_dev *dev) { }
@@ -783,6 +802,7 @@
pci_fixup_header, /* After reading configuration header */
pci_fixup_final, /* Final phase of device fixups */
pci_fixup_enable, /* pci_enable_device() time */
+ pci_fixup_resume, /* pci_enable_device() time */
};
/* Anonymous variables would be nice... */
@@ -801,6 +821,9 @@
#define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \
vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \
+ resume##vendor##device##hook, vendor, device, hook)
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 95c1e74..778e701 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -104,6 +104,10 @@
#define PCI_CLASS_SERIAL_FIBER 0x0c04
#define PCI_CLASS_SERIAL_SMBUS 0x0c05
+#define PCI_BASE_CLASS_WIRELESS 0x0d
+#define PCI_CLASS_WIRELESS_RF_CONTROLLER 0x0d10
+#define PCI_CLASS_WIRELESS_WHCI 0x0d1010
+
#define PCI_BASE_CLASS_INTELLIGENT 0x0e
#define PCI_CLASS_INTELLIGENT_I2O 0x0e00
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index 064b1dc..7a6d34e 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -475,15 +475,32 @@
#define PCI_PWR_CAP 12 /* Capability */
#define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */
-/* Hypertransport sub capability types */
+/*
+ * Hypertransport sub capability types
+ *
+ * Unfortunately there are both 3 bit and 5 bit capability types defined
+ * in the HT spec, catering for that is a little messy. You probably don't
+ * want to use these directly, just use pci_find_ht_capability() and it
+ * will do the right thing for you.
+ */
+#define HT_3BIT_CAP_MASK 0xE0
#define HT_CAPTYPE_SLAVE 0x00 /* Slave/Primary link configuration */
#define HT_CAPTYPE_HOST 0x20 /* Host/Secondary link configuration */
+
+#define HT_5BIT_CAP_MASK 0xF8
#define HT_CAPTYPE_IRQ 0x80 /* IRQ Configuration */
#define HT_CAPTYPE_REMAPPING_40 0xA0 /* 40 bit address remapping */
#define HT_CAPTYPE_REMAPPING_64 0xA2 /* 64 bit address remapping */
#define HT_CAPTYPE_UNITID_CLUMP 0x90 /* Unit ID clumping */
#define HT_CAPTYPE_EXTCONF 0x98 /* Extended Configuration Space Access */
#define HT_CAPTYPE_MSI_MAPPING 0xA8 /* MSI Mapping Capability */
+#define HT_MSI_FLAGS 0x02 /* Offset to flags */
+#define HT_MSI_FLAGS_ENABLE 0x1 /* Mapping enable */
+#define HT_MSI_FLAGS_FIXED 0x2 /* Fixed mapping only */
+#define HT_MSI_FIXED_ADDR 0x00000000FEE00000ULL /* Fixed addr */
+#define HT_MSI_ADDR_LO 0x04 /* Offset to low addr bits */
+#define HT_MSI_ADDR_LO_MASK 0xFFF00000 /* Low address bit mask */
+#define HT_MSI_ADDR_HI 0x08 /* Offset to high addr bits */
#define HT_CAPTYPE_DIRECT_ROUTE 0xB0 /* Direct routing configuration */
#define HT_CAPTYPE_VCSET 0xB8 /* Virtual Channel configuration */
#define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */
diff --git a/include/linux/unwind.h b/include/linux/unwind.h
index 749928c..7760860 100644
--- a/include/linux/unwind.h
+++ b/include/linux/unwind.h
@@ -14,63 +14,6 @@
struct module;
-#ifdef CONFIG_STACK_UNWIND
-
-#include <asm/unwind.h>
-
-#ifndef ARCH_UNWIND_SECTION_NAME
-#define ARCH_UNWIND_SECTION_NAME ".eh_frame"
-#endif
-
-/*
- * Initialize unwind support.
- */
-extern void unwind_init(void);
-extern void unwind_setup(void);
-
-#ifdef CONFIG_MODULES
-
-extern void *unwind_add_table(struct module *,
- const void *table_start,
- unsigned long table_size);
-
-extern void unwind_remove_table(void *handle, int init_only);
-
-#endif
-
-extern int unwind_init_frame_info(struct unwind_frame_info *,
- struct task_struct *,
- /*const*/ struct pt_regs *);
-
-/*
- * Prepare to unwind a blocked task.
- */
-extern int unwind_init_blocked(struct unwind_frame_info *,
- struct task_struct *);
-
-/*
- * Prepare to unwind the currently running thread.
- */
-extern int unwind_init_running(struct unwind_frame_info *,
- asmlinkage int (*callback)(struct unwind_frame_info *,
- void *arg),
- void *arg);
-
-/*
- * Unwind to previous to frame. Returns 0 if successful, negative
- * number in case of an error.
- */
-extern int unwind(struct unwind_frame_info *);
-
-/*
- * Unwind until the return pointer is in user-land (or until an error
- * occurs). Returns 0 if successful, negative number in case of
- * error.
- */
-extern int unwind_to_user(struct unwind_frame_info *);
-
-#else
-
struct unwind_frame_info {};
static inline void unwind_init(void) {}
@@ -85,12 +28,12 @@
return NULL;
}
-#endif
-
static inline void unwind_remove_table(void *handle, int init_only)
{
}
+#endif
+
static inline int unwind_init_frame_info(struct unwind_frame_info *info,
struct task_struct *tsk,
const struct pt_regs *regs)
@@ -122,6 +65,4 @@
return -ENOSYS;
}
-#endif
-
#endif /* _LINUX_UNWIND_H */
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index edef8d5..2a7b38d 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -8,16 +8,21 @@
#include <linux/timer.h>
#include <linux/linkage.h>
#include <linux/bitops.h>
+#include <asm/atomic.h>
struct workqueue_struct;
struct work_struct;
typedef void (*work_func_t)(struct work_struct *work);
+/*
+ * The first word is the work queue pointer and the flags rolled into
+ * one
+ */
+#define work_data_bits(work) ((unsigned long *)(&(work)->data))
+
struct work_struct {
- /* the first word is the work queue pointer and the flags rolled into
- * one */
- unsigned long management;
+ atomic_long_t data;
#define WORK_STRUCT_PENDING 0 /* T if work item pending execution */
#define WORK_STRUCT_NOAUTOREL 1 /* F if work item automatically released on exec */
#define WORK_STRUCT_FLAG_MASK (3UL)
@@ -26,6 +31,9 @@
work_func_t func;
};
+#define WORK_DATA_INIT(autorelease) \
+ ATOMIC_LONG_INIT((autorelease) << WORK_STRUCT_NOAUTOREL)
+
struct delayed_work {
struct work_struct work;
struct timer_list timer;
@@ -36,13 +44,13 @@
};
#define __WORK_INITIALIZER(n, f) { \
- .management = 0, \
+ .data = WORK_DATA_INIT(0), \
.entry = { &(n).entry, &(n).entry }, \
.func = (f), \
}
#define __WORK_INITIALIZER_NAR(n, f) { \
- .management = (1 << WORK_STRUCT_NOAUTOREL), \
+ .data = WORK_DATA_INIT(1), \
.entry = { &(n).entry, &(n).entry }, \
.func = (f), \
}
@@ -82,17 +90,21 @@
/*
* initialize all of a work item in one go
+ *
+ * NOTE! No point in using "atomic_long_set()": useing a direct
+ * assignment of the work data initializer allows the compiler
+ * to generate better code.
*/
#define INIT_WORK(_work, _func) \
do { \
- (_work)->management = 0; \
+ (_work)->data = (atomic_long_t) WORK_DATA_INIT(0); \
INIT_LIST_HEAD(&(_work)->entry); \
PREPARE_WORK((_work), (_func)); \
} while (0)
#define INIT_WORK_NAR(_work, _func) \
do { \
- (_work)->management = (1 << WORK_STRUCT_NOAUTOREL); \
+ (_work)->data = (atomic_long_t) WORK_DATA_INIT(1); \
INIT_LIST_HEAD(&(_work)->entry); \
PREPARE_WORK((_work), (_func)); \
} while (0)
@@ -114,15 +126,15 @@
* @work: The work item in question
*/
#define work_pending(work) \
- test_bit(WORK_STRUCT_PENDING, &(work)->management)
+ test_bit(WORK_STRUCT_PENDING, work_data_bits(work))
/**
* delayed_work_pending - Find out whether a delayable work item is currently
* pending
* @work: The work item in question
*/
-#define delayed_work_pending(work) \
- test_bit(WORK_STRUCT_PENDING, &(work)->work.management)
+#define delayed_work_pending(w) \
+ work_pending(&(w)->work)
/**
* work_release - Release a work item under execution
@@ -143,7 +155,7 @@
* This should also be used to release a delayed work item.
*/
#define work_release(work) \
- clear_bit(WORK_STRUCT_PENDING, &(work)->management)
+ clear_bit(WORK_STRUCT_PENDING, work_data_bits(work))
extern struct workqueue_struct *__create_workqueue(const char *name,
@@ -188,7 +200,7 @@
ret = del_timer_sync(&work->timer);
if (ret)
- clear_bit(WORK_STRUCT_PENDING, &work->work.management);
+ work_release(&work->work);
return ret;
}
diff --git a/include/net/ax25.h b/include/net/ax25.h
index 14b72d8..5ae10dd 100644
--- a/include/net/ax25.h
+++ b/include/net/ax25.h
@@ -277,7 +277,7 @@
extern ax25_cb *ax25_find_cb(ax25_address *, ax25_address *, ax25_digi *, struct net_device *);
extern void ax25_send_to_raw(ax25_address *, struct sk_buff *, int);
extern void ax25_destroy_socket(ax25_cb *);
-extern ax25_cb *ax25_create_cb(void);
+extern ax25_cb * __must_check ax25_create_cb(void);
extern void ax25_fillin_cb(ax25_cb *, ax25_dev *);
extern struct sock *ax25_make_new(struct sock *, struct ax25_dev *);
@@ -333,11 +333,25 @@
extern void ax25_ds_idletimer_expiry(ax25_cb *);
/* ax25_iface.c */
-extern int ax25_protocol_register(unsigned int, int (*)(struct sk_buff *, ax25_cb *));
+
+struct ax25_protocol {
+ struct ax25_protocol *next;
+ unsigned int pid;
+ int (*func)(struct sk_buff *, ax25_cb *);
+};
+
+extern void ax25_register_pid(struct ax25_protocol *ap);
extern void ax25_protocol_release(unsigned int);
-extern int ax25_linkfail_register(void (*)(ax25_cb *, int));
-extern void ax25_linkfail_release(void (*)(ax25_cb *, int));
-extern int ax25_listen_register(ax25_address *, struct net_device *);
+
+struct ax25_linkfail {
+ struct hlist_node lf_node;
+ void (*func)(ax25_cb *, int);
+};
+
+extern void ax25_linkfail_register(struct ax25_linkfail *lf);
+extern void ax25_linkfail_release(struct ax25_linkfail *lf);
+extern int __must_check ax25_listen_register(ax25_address *,
+ struct net_device *);
extern void ax25_listen_release(ax25_address *, struct net_device *);
extern int (*ax25_protocol_function(unsigned int))(struct sk_buff *, ax25_cb *);
extern int ax25_listen_mine(ax25_address *, struct net_device *);
@@ -415,7 +429,7 @@
/* ax25_uid.c */
extern int ax25_uid_policy;
extern ax25_uid_assoc *ax25_findbyuid(uid_t);
-extern int ax25_uid_ioctl(int, struct sockaddr_ax25 *);
+extern int __must_check ax25_uid_ioctl(int, struct sockaddr_ax25 *);
extern struct file_operations ax25_uid_fops;
extern void ax25_uid_free(void);
diff --git a/include/net/rose.h b/include/net/rose.h
index 012b09e..4c05a88 100644
--- a/include/net/rose.h
+++ b/include/net/rose.h
@@ -188,13 +188,13 @@
extern void rose_enquiry_response(struct sock *);
/* rose_route.c */
-extern struct rose_neigh *rose_loopback_neigh;
+extern struct rose_neigh rose_loopback_neigh;
extern struct file_operations rose_neigh_fops;
extern struct file_operations rose_nodes_fops;
extern struct file_operations rose_routes_fops;
-extern int rose_add_loopback_neigh(void);
-extern int rose_add_loopback_node(rose_address *);
+extern void rose_add_loopback_neigh(void);
+extern int __must_check rose_add_loopback_node(rose_address *);
extern void rose_del_loopback_node(rose_address *);
extern void rose_rt_device_down(struct net_device *);
extern void rose_link_device_down(struct net_device *);
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 3c2e105..0bfa332 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -1639,7 +1639,14 @@
{
if (dev->dma_ops)
return dev->dma_ops->alloc_coherent(dev, size, dma_handle, flag);
- return dma_alloc_coherent(dev->dma_device, size, dma_handle, flag);
+ else {
+ dma_addr_t handle;
+ void *ret;
+
+ ret = dma_alloc_coherent(dev->dma_device, size, &handle, flag);
+ *dma_handle = handle;
+ return ret;
+ }
}
/**
diff --git a/include/sound/pcm_oss.h b/include/sound/pcm_oss.h
index c854647..1cd4f64 100644
--- a/include/sound/pcm_oss.h
+++ b/include/sound/pcm_oss.h
@@ -56,6 +56,7 @@
size_t mmap_bytes;
char *buffer; /* vmallocated period */
size_t buffer_used; /* used length from period buffer */
+ struct mutex params_lock;
#ifdef CONFIG_SND_PCM_OSS_PLUGINS
struct snd_pcm_plugin *plugin_first;
struct snd_pcm_plugin *plugin_last;
diff --git a/include/sound/version.h b/include/sound/version.h
index 17137f3..2949b9b 100644
--- a/include/sound/version.h
+++ b/include/sound/version.h
@@ -1,3 +1,3 @@
/* include/version.h. Generated by alsa/ksync script. */
-#define CONFIG_SND_VERSION "1.0.13"
-#define CONFIG_SND_DATE " (Tue Nov 28 14:07:24 2006 UTC)"
+#define CONFIG_SND_VERSION "1.0.14rc1"
+#define CONFIG_SND_DATE " (Wed Dec 20 08:11:48 2006 UTC)"
diff --git a/include/sound/ymfpci.h b/include/sound/ymfpci.h
index d41cda9..f3514ee 100644
--- a/include/sound/ymfpci.h
+++ b/include/sound/ymfpci.h
@@ -286,7 +286,7 @@
int irq;
unsigned int device_id; /* PCI device ID */
- unsigned int rev; /* PCI revision */
+ unsigned char rev; /* PCI revision */
unsigned long reg_area_phys;
void __iomem *reg_area_virt;
struct resource *res_reg_area;
@@ -345,7 +345,6 @@
struct snd_kcontrol *spdif_pcm_ctl;
int mode_dup4ch;
int rear_opened;
- int rear_swap;
int spdif_opened;
struct {
u16 left;
@@ -378,7 +377,7 @@
int snd_ymfpci_pcm2(struct snd_ymfpci *chip, int device, struct snd_pcm **rpcm);
int snd_ymfpci_pcm_spdif(struct snd_ymfpci *chip, int device, struct snd_pcm **rpcm);
int snd_ymfpci_pcm_4ch(struct snd_ymfpci *chip, int device, struct snd_pcm **rpcm);
-int snd_ymfpci_mixer(struct snd_ymfpci *chip, int rear_switch, int rear_swap);
+int snd_ymfpci_mixer(struct snd_ymfpci *chip, int rear_switch);
int snd_ymfpci_timer(struct snd_ymfpci *chip, int device);
#endif /* __SOUND_YMFPCI_H */
diff --git a/init/main.c b/init/main.c
index e3f0bb2..2b1cdaa 100644
--- a/init/main.c
+++ b/init/main.c
@@ -53,6 +53,7 @@
#include <linux/utsrelease.h>
#include <linux/pid_namespace.h>
#include <linux/compile.h>
+#include <linux/device.h>
#include <asm/io.h>
#include <asm/bugs.h>
@@ -94,7 +95,6 @@
extern void prio_tree_init(void);
extern void radix_tree_init(void);
extern void free_initmem(void);
-extern void driver_init(void);
extern void prepare_namespace(void);
#ifdef CONFIG_ACPI
extern void acpi_early_init(void);
diff --git a/kernel/Makefile b/kernel/Makefile
index 5e3f3b7..14f4d45 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -31,7 +31,6 @@
obj-$(CONFIG_UID16) += uid16.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_KALLSYMS) += kallsyms.o
-obj-$(CONFIG_STACK_UNWIND) += unwind.o
obj-$(CONFIG_PM) += power/
obj-$(CONFIG_BSD_PROCESS_ACCT) += acct.o
obj-$(CONFIG_KEXEC) += kexec.o
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index ebfd24a..1c1b712 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -520,7 +520,7 @@
if (desc->chip == &no_irq_chip) {
printk(KERN_WARNING "Trying to install %sinterrupt handler "
- "for IRQ%d\n", is_chained ? "chained " : " ", irq);
+ "for IRQ%d\n", is_chained ? "chained " : "", irq);
/*
* Some ARM implementations install a handler for really dumb
* interrupt hardware without setting an irq_chip. This worked
diff --git a/kernel/sched.c b/kernel/sched.c
index 5cd833b..b81ed87 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -1567,6 +1567,7 @@
return try_to_wake_up(p, state, 0);
}
+static void task_running_tick(struct rq *rq, struct task_struct *p);
/*
* Perform scheduler related setup for a newly forked process p.
* p is forked by current.
@@ -1627,7 +1628,7 @@
* runqueue lock is not a problem.
*/
current->time_slice = 1;
- scheduler_tick();
+ task_running_tick(cpu_rq(cpu), current);
}
local_irq_enable();
put_cpu();
diff --git a/kernel/unwind.c b/kernel/unwind.c
deleted file mode 100644
index 09c2613..0000000
--- a/kernel/unwind.c
+++ /dev/null
@@ -1,1305 +0,0 @@
-/*
- * Copyright (C) 2002-2006 Novell, Inc.
- * Jan Beulich <jbeulich@novell.com>
- * This code is released under version 2 of the GNU GPL.
- *
- * A simple API for unwinding kernel stacks. This is used for
- * debugging and error reporting purposes. The kernel doesn't need
- * full-blown stack unwinding with all the bells and whistles, so there
- * is not much point in implementing the full Dwarf2 unwind API.
- */
-
-#include <linux/unwind.h>
-#include <linux/module.h>
-#include <linux/bootmem.h>
-#include <linux/sort.h>
-#include <linux/stop_machine.h>
-#include <linux/uaccess.h>
-#include <asm/sections.h>
-#include <asm/uaccess.h>
-#include <asm/unaligned.h>
-
-extern const char __start_unwind[], __end_unwind[];
-extern const u8 __start_unwind_hdr[], __end_unwind_hdr[];
-
-#define MAX_STACK_DEPTH 8
-
-#define EXTRA_INFO(f) { \
- BUILD_BUG_ON_ZERO(offsetof(struct unwind_frame_info, f) \
- % FIELD_SIZEOF(struct unwind_frame_info, f)) \
- + offsetof(struct unwind_frame_info, f) \
- / FIELD_SIZEOF(struct unwind_frame_info, f), \
- FIELD_SIZEOF(struct unwind_frame_info, f) \
- }
-#define PTREGS_INFO(f) EXTRA_INFO(regs.f)
-
-static const struct {
- unsigned offs:BITS_PER_LONG / 2;
- unsigned width:BITS_PER_LONG / 2;
-} reg_info[] = {
- UNW_REGISTER_INFO
-};
-
-#undef PTREGS_INFO
-#undef EXTRA_INFO
-
-#ifndef REG_INVALID
-#define REG_INVALID(r) (reg_info[r].width == 0)
-#endif
-
-#define DW_CFA_nop 0x00
-#define DW_CFA_set_loc 0x01
-#define DW_CFA_advance_loc1 0x02
-#define DW_CFA_advance_loc2 0x03
-#define DW_CFA_advance_loc4 0x04
-#define DW_CFA_offset_extended 0x05
-#define DW_CFA_restore_extended 0x06
-#define DW_CFA_undefined 0x07
-#define DW_CFA_same_value 0x08
-#define DW_CFA_register 0x09
-#define DW_CFA_remember_state 0x0a
-#define DW_CFA_restore_state 0x0b
-#define DW_CFA_def_cfa 0x0c
-#define DW_CFA_def_cfa_register 0x0d
-#define DW_CFA_def_cfa_offset 0x0e
-#define DW_CFA_def_cfa_expression 0x0f
-#define DW_CFA_expression 0x10
-#define DW_CFA_offset_extended_sf 0x11
-#define DW_CFA_def_cfa_sf 0x12
-#define DW_CFA_def_cfa_offset_sf 0x13
-#define DW_CFA_val_offset 0x14
-#define DW_CFA_val_offset_sf 0x15
-#define DW_CFA_val_expression 0x16
-#define DW_CFA_lo_user 0x1c
-#define DW_CFA_GNU_window_save 0x2d
-#define DW_CFA_GNU_args_size 0x2e
-#define DW_CFA_GNU_negative_offset_extended 0x2f
-#define DW_CFA_hi_user 0x3f
-
-#define DW_EH_PE_FORM 0x07
-#define DW_EH_PE_native 0x00
-#define DW_EH_PE_leb128 0x01
-#define DW_EH_PE_data2 0x02
-#define DW_EH_PE_data4 0x03
-#define DW_EH_PE_data8 0x04
-#define DW_EH_PE_signed 0x08
-#define DW_EH_PE_ADJUST 0x70
-#define DW_EH_PE_abs 0x00
-#define DW_EH_PE_pcrel 0x10
-#define DW_EH_PE_textrel 0x20
-#define DW_EH_PE_datarel 0x30
-#define DW_EH_PE_funcrel 0x40
-#define DW_EH_PE_aligned 0x50
-#define DW_EH_PE_indirect 0x80
-#define DW_EH_PE_omit 0xff
-
-typedef unsigned long uleb128_t;
-typedef signed long sleb128_t;
-#define sleb128abs __builtin_labs
-
-static struct unwind_table {
- struct {
- unsigned long pc;
- unsigned long range;
- } core, init;
- const void *address;
- unsigned long size;
- const unsigned char *header;
- unsigned long hdrsz;
- struct unwind_table *link;
- const char *name;
-} root_table;
-
-struct unwind_item {
- enum item_location {
- Nowhere,
- Memory,
- Register,
- Value
- } where;
- uleb128_t value;
-};
-
-struct unwind_state {
- uleb128_t loc, org;
- const u8 *cieStart, *cieEnd;
- uleb128_t codeAlign;
- sleb128_t dataAlign;
- struct cfa {
- uleb128_t reg, offs;
- } cfa;
- struct unwind_item regs[ARRAY_SIZE(reg_info)];
- unsigned stackDepth:8;
- unsigned version:8;
- const u8 *label;
- const u8 *stack[MAX_STACK_DEPTH];
-};
-
-static const struct cfa badCFA = { ARRAY_SIZE(reg_info), 1 };
-
-static unsigned unwind_debug;
-static int __init unwind_debug_setup(char *s)
-{
- unwind_debug = simple_strtoul(s, NULL, 0);
- return 1;
-}
-__setup("unwind_debug=", unwind_debug_setup);
-#define dprintk(lvl, fmt, args...) \
- ((void)(lvl > unwind_debug \
- || printk(KERN_DEBUG "unwind: " fmt "\n", ##args)))
-
-static struct unwind_table *find_table(unsigned long pc)
-{
- struct unwind_table *table;
-
- for (table = &root_table; table; table = table->link)
- if ((pc >= table->core.pc
- && pc < table->core.pc + table->core.range)
- || (pc >= table->init.pc
- && pc < table->init.pc + table->init.range))
- break;
-
- return table;
-}
-
-static unsigned long read_pointer(const u8 **pLoc,
- const void *end,
- signed ptrType,
- unsigned long text_base,
- unsigned long data_base);
-
-static void init_unwind_table(struct unwind_table *table,
- const char *name,
- const void *core_start,
- unsigned long core_size,
- const void *init_start,
- unsigned long init_size,
- const void *table_start,
- unsigned long table_size,
- const u8 *header_start,
- unsigned long header_size)
-{
- const u8 *ptr = header_start + 4;
- const u8 *end = header_start + header_size;
-
- table->core.pc = (unsigned long)core_start;
- table->core.range = core_size;
- table->init.pc = (unsigned long)init_start;
- table->init.range = init_size;
- table->address = table_start;
- table->size = table_size;
- /* See if the linker provided table looks valid. */
- if (header_size <= 4
- || header_start[0] != 1
- || (void *)read_pointer(&ptr, end, header_start[1], 0, 0)
- != table_start
- || !read_pointer(&ptr, end, header_start[2], 0, 0)
- || !read_pointer(&ptr, end, header_start[3], 0,
- (unsigned long)header_start)
- || !read_pointer(&ptr, end, header_start[3], 0,
- (unsigned long)header_start))
- header_start = NULL;
- table->hdrsz = header_size;
- smp_wmb();
- table->header = header_start;
- table->link = NULL;
- table->name = name;
-}
-
-void __init unwind_init(void)
-{
- init_unwind_table(&root_table, "kernel",
- _text, _end - _text,
- NULL, 0,
- __start_unwind, __end_unwind - __start_unwind,
- __start_unwind_hdr, __end_unwind_hdr - __start_unwind_hdr);
-}
-
-static const u32 bad_cie, not_fde;
-static const u32 *cie_for_fde(const u32 *fde, const struct unwind_table *);
-static signed fde_pointer_type(const u32 *cie);
-
-struct eh_frame_hdr_table_entry {
- unsigned long start, fde;
-};
-
-static int cmp_eh_frame_hdr_table_entries(const void *p1, const void *p2)
-{
- const struct eh_frame_hdr_table_entry *e1 = p1;
- const struct eh_frame_hdr_table_entry *e2 = p2;
-
- return (e1->start > e2->start) - (e1->start < e2->start);
-}
-
-static void swap_eh_frame_hdr_table_entries(void *p1, void *p2, int size)
-{
- struct eh_frame_hdr_table_entry *e1 = p1;
- struct eh_frame_hdr_table_entry *e2 = p2;
- unsigned long v;
-
- v = e1->start;
- e1->start = e2->start;
- e2->start = v;
- v = e1->fde;
- e1->fde = e2->fde;
- e2->fde = v;
-}
-
-static void __init setup_unwind_table(struct unwind_table *table,
- void *(*alloc)(unsigned long))
-{
- const u8 *ptr;
- unsigned long tableSize = table->size, hdrSize;
- unsigned n;
- const u32 *fde;
- struct {
- u8 version;
- u8 eh_frame_ptr_enc;
- u8 fde_count_enc;
- u8 table_enc;
- unsigned long eh_frame_ptr;
- unsigned int fde_count;
- struct eh_frame_hdr_table_entry table[];
- } __attribute__((__packed__)) *header;
-
- if (table->header)
- return;
-
- if (table->hdrsz)
- printk(KERN_WARNING ".eh_frame_hdr for '%s' present but unusable\n",
- table->name);
-
- if (tableSize & (sizeof(*fde) - 1))
- return;
-
- for (fde = table->address, n = 0;
- tableSize > sizeof(*fde) && tableSize - sizeof(*fde) >= *fde;
- tableSize -= sizeof(*fde) + *fde, fde += 1 + *fde / sizeof(*fde)) {
- const u32 *cie = cie_for_fde(fde, table);
- signed ptrType;
-
- if (cie == ¬_fde)
- continue;
- if (cie == NULL
- || cie == &bad_cie
- || (ptrType = fde_pointer_type(cie)) < 0)
- return;
- ptr = (const u8 *)(fde + 2);
- if (!read_pointer(&ptr,
- (const u8 *)(fde + 1) + *fde,
- ptrType, 0, 0))
- return;
- ++n;
- }
-
- if (tableSize || !n)
- return;
-
- hdrSize = 4 + sizeof(unsigned long) + sizeof(unsigned int)
- + 2 * n * sizeof(unsigned long);
- dprintk(2, "Binary lookup table size for %s: %lu bytes", table->name, hdrSize);
- header = alloc(hdrSize);
- if (!header)
- return;
- header->version = 1;
- header->eh_frame_ptr_enc = DW_EH_PE_abs|DW_EH_PE_native;
- header->fde_count_enc = DW_EH_PE_abs|DW_EH_PE_data4;
- header->table_enc = DW_EH_PE_abs|DW_EH_PE_native;
- put_unaligned((unsigned long)table->address, &header->eh_frame_ptr);
- BUILD_BUG_ON(offsetof(typeof(*header), fde_count)
- % __alignof(typeof(header->fde_count)));
- header->fde_count = n;
-
- BUILD_BUG_ON(offsetof(typeof(*header), table)
- % __alignof(typeof(*header->table)));
- for (fde = table->address, tableSize = table->size, n = 0;
- tableSize;
- tableSize -= sizeof(*fde) + *fde, fde += 1 + *fde / sizeof(*fde)) {
- const u32 *cie = fde + 1 - fde[1] / sizeof(*fde);
-
- if (!fde[1])
- continue; /* this is a CIE */
- ptr = (const u8 *)(fde + 2);
- header->table[n].start = read_pointer(&ptr,
- (const u8 *)(fde + 1) + *fde,
- fde_pointer_type(cie), 0, 0);
- header->table[n].fde = (unsigned long)fde;
- ++n;
- }
- WARN_ON(n != header->fde_count);
-
- sort(header->table,
- n,
- sizeof(*header->table),
- cmp_eh_frame_hdr_table_entries,
- swap_eh_frame_hdr_table_entries);
-
- table->hdrsz = hdrSize;
- smp_wmb();
- table->header = (const void *)header;
-}
-
-static void *__init balloc(unsigned long sz)
-{
- return __alloc_bootmem_nopanic(sz,
- sizeof(unsigned int),
- __pa(MAX_DMA_ADDRESS));
-}
-
-void __init unwind_setup(void)
-{
- setup_unwind_table(&root_table, balloc);
-}
-
-#ifdef CONFIG_MODULES
-
-static struct unwind_table *last_table;
-
-/* Must be called with module_mutex held. */
-void *unwind_add_table(struct module *module,
- const void *table_start,
- unsigned long table_size)
-{
- struct unwind_table *table;
-
- if (table_size <= 0)
- return NULL;
-
- table = kmalloc(sizeof(*table), GFP_KERNEL);
- if (!table)
- return NULL;
-
- init_unwind_table(table, module->name,
- module->module_core, module->core_size,
- module->module_init, module->init_size,
- table_start, table_size,
- NULL, 0);
-
- if (last_table)
- last_table->link = table;
- else
- root_table.link = table;
- last_table = table;
-
- return table;
-}
-
-struct unlink_table_info
-{
- struct unwind_table *table;
- int init_only;
-};
-
-static int unlink_table(void *arg)
-{
- struct unlink_table_info *info = arg;
- struct unwind_table *table = info->table, *prev;
-
- for (prev = &root_table; prev->link && prev->link != table; prev = prev->link)
- ;
-
- if (prev->link) {
- if (info->init_only) {
- table->init.pc = 0;
- table->init.range = 0;
- info->table = NULL;
- } else {
- prev->link = table->link;
- if (!prev->link)
- last_table = prev;
- }
- } else
- info->table = NULL;
-
- return 0;
-}
-
-/* Must be called with module_mutex held. */
-void unwind_remove_table(void *handle, int init_only)
-{
- struct unwind_table *table = handle;
- struct unlink_table_info info;
-
- if (!table || table == &root_table)
- return;
-
- if (init_only && table == last_table) {
- table->init.pc = 0;
- table->init.range = 0;
- return;
- }
-
- info.table = table;
- info.init_only = init_only;
- stop_machine_run(unlink_table, &info, NR_CPUS);
-
- if (info.table)
- kfree(table);
-}
-
-#endif /* CONFIG_MODULES */
-
-static uleb128_t get_uleb128(const u8 **pcur, const u8 *end)
-{
- const u8 *cur = *pcur;
- uleb128_t value;
- unsigned shift;
-
- for (shift = 0, value = 0; cur < end; shift += 7) {
- if (shift + 7 > 8 * sizeof(value)
- && (*cur & 0x7fU) >= (1U << (8 * sizeof(value) - shift))) {
- cur = end + 1;
- break;
- }
- value |= (uleb128_t)(*cur & 0x7f) << shift;
- if (!(*cur++ & 0x80))
- break;
- }
- *pcur = cur;
-
- return value;
-}
-
-static sleb128_t get_sleb128(const u8 **pcur, const u8 *end)
-{
- const u8 *cur = *pcur;
- sleb128_t value;
- unsigned shift;
-
- for (shift = 0, value = 0; cur < end; shift += 7) {
- if (shift + 7 > 8 * sizeof(value)
- && (*cur & 0x7fU) >= (1U << (8 * sizeof(value) - shift))) {
- cur = end + 1;
- break;
- }
- value |= (sleb128_t)(*cur & 0x7f) << shift;
- if (!(*cur & 0x80)) {
- value |= -(*cur++ & 0x40) << shift;
- break;
- }
- }
- *pcur = cur;
-
- return value;
-}
-
-static const u32 *cie_for_fde(const u32 *fde, const struct unwind_table *table)
-{
- const u32 *cie;
-
- if (!*fde || (*fde & (sizeof(*fde) - 1)))
- return &bad_cie;
- if (!fde[1])
- return ¬_fde; /* this is a CIE */
- if ((fde[1] & (sizeof(*fde) - 1))
- || fde[1] > (unsigned long)(fde + 1) - (unsigned long)table->address)
- return NULL; /* this is not a valid FDE */
- cie = fde + 1 - fde[1] / sizeof(*fde);
- if (*cie <= sizeof(*cie) + 4
- || *cie >= fde[1] - sizeof(*fde)
- || (*cie & (sizeof(*cie) - 1))
- || cie[1])
- return NULL; /* this is not a (valid) CIE */
- return cie;
-}
-
-static unsigned long read_pointer(const u8 **pLoc,
- const void *end,
- signed ptrType,
- unsigned long text_base,
- unsigned long data_base)
-{
- unsigned long value = 0;
- union {
- const u8 *p8;
- const u16 *p16u;
- const s16 *p16s;
- const u32 *p32u;
- const s32 *p32s;
- const unsigned long *pul;
- } ptr;
-
- if (ptrType < 0 || ptrType == DW_EH_PE_omit) {
- dprintk(1, "Invalid pointer encoding %02X (%p,%p).", ptrType, *pLoc, end);
- return 0;
- }
- ptr.p8 = *pLoc;
- switch(ptrType & DW_EH_PE_FORM) {
- case DW_EH_PE_data2:
- if (end < (const void *)(ptr.p16u + 1)) {
- dprintk(1, "Data16 overrun (%p,%p).", ptr.p8, end);
- return 0;
- }
- if(ptrType & DW_EH_PE_signed)
- value = get_unaligned(ptr.p16s++);
- else
- value = get_unaligned(ptr.p16u++);
- break;
- case DW_EH_PE_data4:
-#ifdef CONFIG_64BIT
- if (end < (const void *)(ptr.p32u + 1)) {
- dprintk(1, "Data32 overrun (%p,%p).", ptr.p8, end);
- return 0;
- }
- if(ptrType & DW_EH_PE_signed)
- value = get_unaligned(ptr.p32s++);
- else
- value = get_unaligned(ptr.p32u++);
- break;
- case DW_EH_PE_data8:
- BUILD_BUG_ON(sizeof(u64) != sizeof(value));
-#else
- BUILD_BUG_ON(sizeof(u32) != sizeof(value));
-#endif
- case DW_EH_PE_native:
- if (end < (const void *)(ptr.pul + 1)) {
- dprintk(1, "DataUL overrun (%p,%p).", ptr.p8, end);
- return 0;
- }
- value = get_unaligned(ptr.pul++);
- break;
- case DW_EH_PE_leb128:
- BUILD_BUG_ON(sizeof(uleb128_t) > sizeof(value));
- value = ptrType & DW_EH_PE_signed
- ? get_sleb128(&ptr.p8, end)
- : get_uleb128(&ptr.p8, end);
- if ((const void *)ptr.p8 > end) {
- dprintk(1, "DataLEB overrun (%p,%p).", ptr.p8, end);
- return 0;
- }
- break;
- default:
- dprintk(2, "Cannot decode pointer type %02X (%p,%p).",
- ptrType, ptr.p8, end);
- return 0;
- }
- switch(ptrType & DW_EH_PE_ADJUST) {
- case DW_EH_PE_abs:
- break;
- case DW_EH_PE_pcrel:
- value += (unsigned long)*pLoc;
- break;
- case DW_EH_PE_textrel:
- if (likely(text_base)) {
- value += text_base;
- break;
- }
- dprintk(2, "Text-relative encoding %02X (%p,%p), but zero text base.",
- ptrType, *pLoc, end);
- return 0;
- case DW_EH_PE_datarel:
- if (likely(data_base)) {
- value += data_base;
- break;
- }
- dprintk(2, "Data-relative encoding %02X (%p,%p), but zero data base.",
- ptrType, *pLoc, end);
- return 0;
- default:
- dprintk(2, "Cannot adjust pointer type %02X (%p,%p).",
- ptrType, *pLoc, end);
- return 0;
- }
- if ((ptrType & DW_EH_PE_indirect)
- && probe_kernel_address((unsigned long *)value, value)) {
- dprintk(1, "Cannot read indirect value %lx (%p,%p).",
- value, *pLoc, end);
- return 0;
- }
- *pLoc = ptr.p8;
-
- return value;
-}
-
-static signed fde_pointer_type(const u32 *cie)
-{
- const u8 *ptr = (const u8 *)(cie + 2);
- unsigned version = *ptr;
-
- if (version != 1)
- return -1; /* unsupported */
- if (*++ptr) {
- const char *aug;
- const u8 *end = (const u8 *)(cie + 1) + *cie;
- uleb128_t len;
-
- /* check if augmentation size is first (and thus present) */
- if (*ptr != 'z')
- return -1;
- /* check if augmentation string is nul-terminated */
- if ((ptr = memchr(aug = (const void *)ptr, 0, end - ptr)) == NULL)
- return -1;
- ++ptr; /* skip terminator */
- get_uleb128(&ptr, end); /* skip code alignment */
- get_sleb128(&ptr, end); /* skip data alignment */
- /* skip return address column */
- version <= 1 ? (void)++ptr : (void)get_uleb128(&ptr, end);
- len = get_uleb128(&ptr, end); /* augmentation length */
- if (ptr + len < ptr || ptr + len > end)
- return -1;
- end = ptr + len;
- while (*++aug) {
- if (ptr >= end)
- return -1;
- switch(*aug) {
- case 'L':
- ++ptr;
- break;
- case 'P': {
- signed ptrType = *ptr++;
-
- if (!read_pointer(&ptr, end, ptrType, 0, 0)
- || ptr > end)
- return -1;
- }
- break;
- case 'R':
- return *ptr;
- default:
- return -1;
- }
- }
- }
- return DW_EH_PE_native|DW_EH_PE_abs;
-}
-
-static int advance_loc(unsigned long delta, struct unwind_state *state)
-{
- state->loc += delta * state->codeAlign;
-
- return delta > 0;
-}
-
-static void set_rule(uleb128_t reg,
- enum item_location where,
- uleb128_t value,
- struct unwind_state *state)
-{
- if (reg < ARRAY_SIZE(state->regs)) {
- state->regs[reg].where = where;
- state->regs[reg].value = value;
- }
-}
-
-static int processCFI(const u8 *start,
- const u8 *end,
- unsigned long targetLoc,
- signed ptrType,
- struct unwind_state *state)
-{
- union {
- const u8 *p8;
- const u16 *p16;
- const u32 *p32;
- } ptr;
- int result = 1;
-
- if (start != state->cieStart) {
- state->loc = state->org;
- result = processCFI(state->cieStart, state->cieEnd, 0, ptrType, state);
- if (targetLoc == 0 && state->label == NULL)
- return result;
- }
- for (ptr.p8 = start; result && ptr.p8 < end; ) {
- switch(*ptr.p8 >> 6) {
- uleb128_t value;
-
- case 0:
- switch(*ptr.p8++) {
- case DW_CFA_nop:
- break;
- case DW_CFA_set_loc:
- state->loc = read_pointer(&ptr.p8, end, ptrType, 0, 0);
- if (state->loc == 0)
- result = 0;
- break;
- case DW_CFA_advance_loc1:
- result = ptr.p8 < end && advance_loc(*ptr.p8++, state);
- break;
- case DW_CFA_advance_loc2:
- result = ptr.p8 <= end + 2
- && advance_loc(*ptr.p16++, state);
- break;
- case DW_CFA_advance_loc4:
- result = ptr.p8 <= end + 4
- && advance_loc(*ptr.p32++, state);
- break;
- case DW_CFA_offset_extended:
- value = get_uleb128(&ptr.p8, end);
- set_rule(value, Memory, get_uleb128(&ptr.p8, end), state);
- break;
- case DW_CFA_val_offset:
- value = get_uleb128(&ptr.p8, end);
- set_rule(value, Value, get_uleb128(&ptr.p8, end), state);
- break;
- case DW_CFA_offset_extended_sf:
- value = get_uleb128(&ptr.p8, end);
- set_rule(value, Memory, get_sleb128(&ptr.p8, end), state);
- break;
- case DW_CFA_val_offset_sf:
- value = get_uleb128(&ptr.p8, end);
- set_rule(value, Value, get_sleb128(&ptr.p8, end), state);
- break;
- case DW_CFA_restore_extended:
- case DW_CFA_undefined:
- case DW_CFA_same_value:
- set_rule(get_uleb128(&ptr.p8, end), Nowhere, 0, state);
- break;
- case DW_CFA_register:
- value = get_uleb128(&ptr.p8, end);
- set_rule(value,
- Register,
- get_uleb128(&ptr.p8, end), state);
- break;
- case DW_CFA_remember_state:
- if (ptr.p8 == state->label) {
- state->label = NULL;
- return 1;
- }
- if (state->stackDepth >= MAX_STACK_DEPTH) {
- dprintk(1, "State stack overflow (%p,%p).", ptr.p8, end);
- return 0;
- }
- state->stack[state->stackDepth++] = ptr.p8;
- break;
- case DW_CFA_restore_state:
- if (state->stackDepth) {
- const uleb128_t loc = state->loc;
- const u8 *label = state->label;
-
- state->label = state->stack[state->stackDepth - 1];
- memcpy(&state->cfa, &badCFA, sizeof(state->cfa));
- memset(state->regs, 0, sizeof(state->regs));
- state->stackDepth = 0;
- result = processCFI(start, end, 0, ptrType, state);
- state->loc = loc;
- state->label = label;
- } else {
- dprintk(1, "State stack underflow (%p,%p).", ptr.p8, end);
- return 0;
- }
- break;
- case DW_CFA_def_cfa:
- state->cfa.reg = get_uleb128(&ptr.p8, end);
- /*nobreak*/
- case DW_CFA_def_cfa_offset:
- state->cfa.offs = get_uleb128(&ptr.p8, end);
- break;
- case DW_CFA_def_cfa_sf:
- state->cfa.reg = get_uleb128(&ptr.p8, end);
- /*nobreak*/
- case DW_CFA_def_cfa_offset_sf:
- state->cfa.offs = get_sleb128(&ptr.p8, end)
- * state->dataAlign;
- break;
- case DW_CFA_def_cfa_register:
- state->cfa.reg = get_uleb128(&ptr.p8, end);
- break;
- /*todo case DW_CFA_def_cfa_expression: */
- /*todo case DW_CFA_expression: */
- /*todo case DW_CFA_val_expression: */
- case DW_CFA_GNU_args_size:
- get_uleb128(&ptr.p8, end);
- break;
- case DW_CFA_GNU_negative_offset_extended:
- value = get_uleb128(&ptr.p8, end);
- set_rule(value,
- Memory,
- (uleb128_t)0 - get_uleb128(&ptr.p8, end), state);
- break;
- case DW_CFA_GNU_window_save:
- default:
- dprintk(1, "Unrecognized CFI op %02X (%p,%p).", ptr.p8[-1], ptr.p8 - 1, end);
- result = 0;
- break;
- }
- break;
- case 1:
- result = advance_loc(*ptr.p8++ & 0x3f, state);
- break;
- case 2:
- value = *ptr.p8++ & 0x3f;
- set_rule(value, Memory, get_uleb128(&ptr.p8, end), state);
- break;
- case 3:
- set_rule(*ptr.p8++ & 0x3f, Nowhere, 0, state);
- break;
- }
- if (ptr.p8 > end) {
- dprintk(1, "Data overrun (%p,%p).", ptr.p8, end);
- result = 0;
- }
- if (result && targetLoc != 0 && targetLoc < state->loc)
- return 1;
- }
-
- if (result && ptr.p8 < end)
- dprintk(1, "Data underrun (%p,%p).", ptr.p8, end);
-
- return result
- && ptr.p8 == end
- && (targetLoc == 0
- || (/*todo While in theory this should apply, gcc in practice omits
- everything past the function prolog, and hence the location
- never reaches the end of the function.
- targetLoc < state->loc &&*/ state->label == NULL));
-}
-
-/* Unwind to previous to frame. Returns 0 if successful, negative
- * number in case of an error. */
-int unwind(struct unwind_frame_info *frame)
-{
-#define FRAME_REG(r, t) (((t *)frame)[reg_info[r].offs])
- const u32 *fde = NULL, *cie = NULL;
- const u8 *ptr = NULL, *end = NULL;
- unsigned long pc = UNW_PC(frame) - frame->call_frame, sp;
- unsigned long startLoc = 0, endLoc = 0, cfa;
- unsigned i;
- signed ptrType = -1;
- uleb128_t retAddrReg = 0;
- const struct unwind_table *table;
- struct unwind_state state;
-
- if (UNW_PC(frame) == 0)
- return -EINVAL;
- if ((table = find_table(pc)) != NULL
- && !(table->size & (sizeof(*fde) - 1))) {
- const u8 *hdr = table->header;
- unsigned long tableSize;
-
- smp_rmb();
- if (hdr && hdr[0] == 1) {
- switch(hdr[3] & DW_EH_PE_FORM) {
- case DW_EH_PE_native: tableSize = sizeof(unsigned long); break;
- case DW_EH_PE_data2: tableSize = 2; break;
- case DW_EH_PE_data4: tableSize = 4; break;
- case DW_EH_PE_data8: tableSize = 8; break;
- default: tableSize = 0; break;
- }
- ptr = hdr + 4;
- end = hdr + table->hdrsz;
- if (tableSize
- && read_pointer(&ptr, end, hdr[1], 0, 0)
- == (unsigned long)table->address
- && (i = read_pointer(&ptr, end, hdr[2], 0, 0)) > 0
- && i == (end - ptr) / (2 * tableSize)
- && !((end - ptr) % (2 * tableSize))) {
- do {
- const u8 *cur = ptr + (i / 2) * (2 * tableSize);
-
- startLoc = read_pointer(&cur,
- cur + tableSize,
- hdr[3], 0,
- (unsigned long)hdr);
- if (pc < startLoc)
- i /= 2;
- else {
- ptr = cur - tableSize;
- i = (i + 1) / 2;
- }
- } while (startLoc && i > 1);
- if (i == 1
- && (startLoc = read_pointer(&ptr,
- ptr + tableSize,
- hdr[3], 0,
- (unsigned long)hdr)) != 0
- && pc >= startLoc)
- fde = (void *)read_pointer(&ptr,
- ptr + tableSize,
- hdr[3], 0,
- (unsigned long)hdr);
- }
- }
- if(hdr && !fde)
- dprintk(3, "Binary lookup for %lx failed.", pc);
-
- if (fde != NULL) {
- cie = cie_for_fde(fde, table);
- ptr = (const u8 *)(fde + 2);
- if(cie != NULL
- && cie != &bad_cie
- && cie != ¬_fde
- && (ptrType = fde_pointer_type(cie)) >= 0
- && read_pointer(&ptr,
- (const u8 *)(fde + 1) + *fde,
- ptrType, 0, 0) == startLoc) {
- if (!(ptrType & DW_EH_PE_indirect))
- ptrType &= DW_EH_PE_FORM|DW_EH_PE_signed;
- endLoc = startLoc
- + read_pointer(&ptr,
- (const u8 *)(fde + 1) + *fde,
- ptrType, 0, 0);
- if(pc >= endLoc)
- fde = NULL;
- } else
- fde = NULL;
- if(!fde)
- dprintk(1, "Binary lookup result for %lx discarded.", pc);
- }
- if (fde == NULL) {
- for (fde = table->address, tableSize = table->size;
- cie = NULL, tableSize > sizeof(*fde)
- && tableSize - sizeof(*fde) >= *fde;
- tableSize -= sizeof(*fde) + *fde,
- fde += 1 + *fde / sizeof(*fde)) {
- cie = cie_for_fde(fde, table);
- if (cie == &bad_cie) {
- cie = NULL;
- break;
- }
- if (cie == NULL
- || cie == ¬_fde
- || (ptrType = fde_pointer_type(cie)) < 0)
- continue;
- ptr = (const u8 *)(fde + 2);
- startLoc = read_pointer(&ptr,
- (const u8 *)(fde + 1) + *fde,
- ptrType, 0, 0);
- if (!startLoc)
- continue;
- if (!(ptrType & DW_EH_PE_indirect))
- ptrType &= DW_EH_PE_FORM|DW_EH_PE_signed;
- endLoc = startLoc
- + read_pointer(&ptr,
- (const u8 *)(fde + 1) + *fde,
- ptrType, 0, 0);
- if (pc >= startLoc && pc < endLoc)
- break;
- }
- if(!fde)
- dprintk(3, "Linear lookup for %lx failed.", pc);
- }
- }
- if (cie != NULL) {
- memset(&state, 0, sizeof(state));
- state.cieEnd = ptr; /* keep here temporarily */
- ptr = (const u8 *)(cie + 2);
- end = (const u8 *)(cie + 1) + *cie;
- frame->call_frame = 1;
- if ((state.version = *ptr) != 1)
- cie = NULL; /* unsupported version */
- else if (*++ptr) {
- /* check if augmentation size is first (and thus present) */
- if (*ptr == 'z') {
- while (++ptr < end && *ptr) {
- switch(*ptr) {
- /* check for ignorable (or already handled)
- * nul-terminated augmentation string */
- case 'L':
- case 'P':
- case 'R':
- continue;
- case 'S':
- frame->call_frame = 0;
- continue;
- default:
- break;
- }
- break;
- }
- }
- if (ptr >= end || *ptr)
- cie = NULL;
- }
- if(!cie)
- dprintk(1, "CIE unusable (%p,%p).", ptr, end);
- ++ptr;
- }
- if (cie != NULL) {
- /* get code aligment factor */
- state.codeAlign = get_uleb128(&ptr, end);
- /* get data aligment factor */
- state.dataAlign = get_sleb128(&ptr, end);
- if (state.codeAlign == 0 || state.dataAlign == 0 || ptr >= end)
- cie = NULL;
- else if (UNW_PC(frame) % state.codeAlign
- || UNW_SP(frame) % sleb128abs(state.dataAlign)) {
- dprintk(1, "Input pointer(s) misaligned (%lx,%lx).",
- UNW_PC(frame), UNW_SP(frame));
- return -EPERM;
- } else {
- retAddrReg = state.version <= 1 ? *ptr++ : get_uleb128(&ptr, end);
- /* skip augmentation */
- if (((const char *)(cie + 2))[1] == 'z') {
- uleb128_t augSize = get_uleb128(&ptr, end);
-
- ptr += augSize;
- }
- if (ptr > end
- || retAddrReg >= ARRAY_SIZE(reg_info)
- || REG_INVALID(retAddrReg)
- || reg_info[retAddrReg].width != sizeof(unsigned long))
- cie = NULL;
- }
- if(!cie)
- dprintk(1, "CIE validation failed (%p,%p).", ptr, end);
- }
- if (cie != NULL) {
- state.cieStart = ptr;
- ptr = state.cieEnd;
- state.cieEnd = end;
- end = (const u8 *)(fde + 1) + *fde;
- /* skip augmentation */
- if (((const char *)(cie + 2))[1] == 'z') {
- uleb128_t augSize = get_uleb128(&ptr, end);
-
- if ((ptr += augSize) > end)
- fde = NULL;
- }
- if(!fde)
- dprintk(1, "FDE validation failed (%p,%p).", ptr, end);
- }
- if (cie == NULL || fde == NULL) {
-#ifdef CONFIG_FRAME_POINTER
- unsigned long top, bottom;
-
- if ((UNW_SP(frame) | UNW_FP(frame)) % sizeof(unsigned long))
- return -EPERM;
- top = STACK_TOP(frame->task);
- bottom = STACK_BOTTOM(frame->task);
-# if FRAME_RETADDR_OFFSET < 0
- if (UNW_SP(frame) < top
- && UNW_FP(frame) <= UNW_SP(frame)
- && bottom < UNW_FP(frame)
-# else
- if (UNW_SP(frame) > top
- && UNW_FP(frame) >= UNW_SP(frame)
- && bottom > UNW_FP(frame)
-# endif
- && !((UNW_SP(frame) | UNW_FP(frame))
- & (sizeof(unsigned long) - 1))) {
- unsigned long link;
-
- if (!probe_kernel_address(
- (unsigned long *)(UNW_FP(frame)
- + FRAME_LINK_OFFSET),
- link)
-# if FRAME_RETADDR_OFFSET < 0
- && link > bottom && link < UNW_FP(frame)
-# else
- && link > UNW_FP(frame) && link < bottom
-# endif
- && !(link & (sizeof(link) - 1))
- && !probe_kernel_address(
- (unsigned long *)(UNW_FP(frame)
- + FRAME_RETADDR_OFFSET), UNW_PC(frame))) {
- UNW_SP(frame) = UNW_FP(frame) + FRAME_RETADDR_OFFSET
-# if FRAME_RETADDR_OFFSET < 0
- -
-# else
- +
-# endif
- sizeof(UNW_PC(frame));
- UNW_FP(frame) = link;
- return 0;
- }
- }
-#endif
- return -ENXIO;
- }
- state.org = startLoc;
- memcpy(&state.cfa, &badCFA, sizeof(state.cfa));
- /* process instructions */
- if (!processCFI(ptr, end, pc, ptrType, &state)
- || state.loc > endLoc
- || state.regs[retAddrReg].where == Nowhere
- || state.cfa.reg >= ARRAY_SIZE(reg_info)
- || reg_info[state.cfa.reg].width != sizeof(unsigned long)
- || FRAME_REG(state.cfa.reg, unsigned long) % sizeof(unsigned long)
- || state.cfa.offs % sizeof(unsigned long)) {
- dprintk(1, "Unusable unwind info (%p,%p).", ptr, end);
- return -EIO;
- }
- /* update frame */
-#ifndef CONFIG_AS_CFI_SIGNAL_FRAME
- if(frame->call_frame
- && !UNW_DEFAULT_RA(state.regs[retAddrReg], state.dataAlign))
- frame->call_frame = 0;
-#endif
- cfa = FRAME_REG(state.cfa.reg, unsigned long) + state.cfa.offs;
- startLoc = min((unsigned long)UNW_SP(frame), cfa);
- endLoc = max((unsigned long)UNW_SP(frame), cfa);
- if (STACK_LIMIT(startLoc) != STACK_LIMIT(endLoc)) {
- startLoc = min(STACK_LIMIT(cfa), cfa);
- endLoc = max(STACK_LIMIT(cfa), cfa);
- }
-#ifndef CONFIG_64BIT
-# define CASES CASE(8); CASE(16); CASE(32)
-#else
-# define CASES CASE(8); CASE(16); CASE(32); CASE(64)
-#endif
- pc = UNW_PC(frame);
- sp = UNW_SP(frame);
- for (i = 0; i < ARRAY_SIZE(state.regs); ++i) {
- if (REG_INVALID(i)) {
- if (state.regs[i].where == Nowhere)
- continue;
- dprintk(1, "Cannot restore register %u (%d).",
- i, state.regs[i].where);
- return -EIO;
- }
- switch(state.regs[i].where) {
- default:
- break;
- case Register:
- if (state.regs[i].value >= ARRAY_SIZE(reg_info)
- || REG_INVALID(state.regs[i].value)
- || reg_info[i].width > reg_info[state.regs[i].value].width) {
- dprintk(1, "Cannot restore register %u from register %lu.",
- i, state.regs[i].value);
- return -EIO;
- }
- switch(reg_info[state.regs[i].value].width) {
-#define CASE(n) \
- case sizeof(u##n): \
- state.regs[i].value = FRAME_REG(state.regs[i].value, \
- const u##n); \
- break
- CASES;
-#undef CASE
- default:
- dprintk(1, "Unsupported register size %u (%lu).",
- reg_info[state.regs[i].value].width,
- state.regs[i].value);
- return -EIO;
- }
- break;
- }
- }
- for (i = 0; i < ARRAY_SIZE(state.regs); ++i) {
- if (REG_INVALID(i))
- continue;
- switch(state.regs[i].where) {
- case Nowhere:
- if (reg_info[i].width != sizeof(UNW_SP(frame))
- || &FRAME_REG(i, __typeof__(UNW_SP(frame)))
- != &UNW_SP(frame))
- continue;
- UNW_SP(frame) = cfa;
- break;
- case Register:
- switch(reg_info[i].width) {
-#define CASE(n) case sizeof(u##n): \
- FRAME_REG(i, u##n) = state.regs[i].value; \
- break
- CASES;
-#undef CASE
- default:
- dprintk(1, "Unsupported register size %u (%u).",
- reg_info[i].width, i);
- return -EIO;
- }
- break;
- case Value:
- if (reg_info[i].width != sizeof(unsigned long)) {
- dprintk(1, "Unsupported value size %u (%u).",
- reg_info[i].width, i);
- return -EIO;
- }
- FRAME_REG(i, unsigned long) = cfa + state.regs[i].value
- * state.dataAlign;
- break;
- case Memory: {
- unsigned long addr = cfa + state.regs[i].value
- * state.dataAlign;
-
- if ((state.regs[i].value * state.dataAlign)
- % sizeof(unsigned long)
- || addr < startLoc
- || addr + sizeof(unsigned long) < addr
- || addr + sizeof(unsigned long) > endLoc) {
- dprintk(1, "Bad memory location %lx (%lx).",
- addr, state.regs[i].value);
- return -EIO;
- }
- switch(reg_info[i].width) {
-#define CASE(n) case sizeof(u##n): \
- probe_kernel_address((u##n *)addr, FRAME_REG(i, u##n)); \
- break
- CASES;
-#undef CASE
- default:
- dprintk(1, "Unsupported memory size %u (%u).",
- reg_info[i].width, i);
- return -EIO;
- }
- }
- break;
- }
- }
-
- if (UNW_PC(frame) % state.codeAlign
- || UNW_SP(frame) % sleb128abs(state.dataAlign)) {
- dprintk(1, "Output pointer(s) misaligned (%lx,%lx).",
- UNW_PC(frame), UNW_SP(frame));
- return -EIO;
- }
- if (pc == UNW_PC(frame) && sp == UNW_SP(frame)) {
- dprintk(1, "No progress (%lx,%lx).", pc, sp);
- return -EIO;
- }
-
- return 0;
-#undef CASES
-#undef FRAME_REG
-}
-EXPORT_SYMBOL(unwind);
-
-int unwind_init_frame_info(struct unwind_frame_info *info,
- struct task_struct *tsk,
- /*const*/ struct pt_regs *regs)
-{
- info->task = tsk;
- info->call_frame = 0;
- arch_unw_init_frame_info(info, regs);
-
- return 0;
-}
-EXPORT_SYMBOL(unwind_init_frame_info);
-
-/*
- * Prepare to unwind a blocked task.
- */
-int unwind_init_blocked(struct unwind_frame_info *info,
- struct task_struct *tsk)
-{
- info->task = tsk;
- info->call_frame = 0;
- arch_unw_init_blocked(info);
-
- return 0;
-}
-EXPORT_SYMBOL(unwind_init_blocked);
-
-/*
- * Prepare to unwind the currently running thread.
- */
-int unwind_init_running(struct unwind_frame_info *info,
- asmlinkage int (*callback)(struct unwind_frame_info *,
- void *arg),
- void *arg)
-{
- info->task = current;
- info->call_frame = 0;
-
- return arch_unwind_init_running(info, callback, arg);
-}
-EXPORT_SYMBOL(unwind_init_running);
-
-/*
- * Unwind until the return pointer is in user-land (or until an error
- * occurs). Returns 0 if successful, negative number in case of
- * error.
- */
-int unwind_to_user(struct unwind_frame_info *info)
-{
- while (!arch_unw_user_mode(info)) {
- int err = unwind(info);
-
- if (err < 0)
- return err;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(unwind_to_user);
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index db49886..742cbbe 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -96,13 +96,13 @@
BUG_ON(!work_pending(work));
new = (unsigned long) wq | (1UL << WORK_STRUCT_PENDING);
- new |= work->management & WORK_STRUCT_FLAG_MASK;
- work->management = new;
+ new |= WORK_STRUCT_FLAG_MASK & *work_data_bits(work);
+ atomic_long_set(&work->data, new);
}
static inline void *get_wq_data(struct work_struct *work)
{
- return (void *) (work->management & WORK_STRUCT_WQ_DATA_MASK);
+ return (void *) (atomic_long_read(&work->data) & WORK_STRUCT_WQ_DATA_MASK);
}
static int __run_work(struct cpu_workqueue_struct *cwq, struct work_struct *work)
@@ -133,7 +133,7 @@
list_del_init(&work->entry);
spin_unlock_irqrestore(&cwq->lock, flags);
- if (!test_bit(WORK_STRUCT_NOAUTOREL, &work->management))
+ if (!test_bit(WORK_STRUCT_NOAUTOREL, work_data_bits(work)))
work_release(work);
f(work);
@@ -206,7 +206,7 @@
{
int ret = 0, cpu = get_cpu();
- if (!test_and_set_bit(WORK_STRUCT_PENDING, &work->management)) {
+ if (!test_and_set_bit(WORK_STRUCT_PENDING, work_data_bits(work))) {
if (unlikely(is_single_threaded(wq)))
cpu = singlethread_cpu;
BUG_ON(!list_empty(&work->entry));
@@ -248,7 +248,7 @@
if (delay == 0)
return queue_work(wq, work);
- if (!test_and_set_bit(WORK_STRUCT_PENDING, &work->management)) {
+ if (!test_and_set_bit(WORK_STRUCT_PENDING, work_data_bits(work))) {
BUG_ON(timer_pending(timer));
BUG_ON(!list_empty(&work->entry));
@@ -280,7 +280,7 @@
struct timer_list *timer = &dwork->timer;
struct work_struct *work = &dwork->work;
- if (!test_and_set_bit(WORK_STRUCT_PENDING, &work->management)) {
+ if (!test_and_set_bit(WORK_STRUCT_PENDING, work_data_bits(work))) {
BUG_ON(timer_pending(timer));
BUG_ON(!list_empty(&work->entry));
@@ -321,7 +321,7 @@
spin_unlock_irqrestore(&cwq->lock, flags);
BUG_ON(get_wq_data(work) != cwq);
- if (!test_bit(WORK_STRUCT_NOAUTOREL, &work->management))
+ if (!test_bit(WORK_STRUCT_NOAUTOREL, work_data_bits(work)))
work_release(work);
f(work);
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 818e458..5c268187 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -354,24 +354,6 @@
some architectures or if you use external debuggers.
If you don't debug the kernel, you can say N.
-config UNWIND_INFO
- bool "Compile the kernel with frame unwind information"
- depends on !IA64 && !PARISC && !ARM
- depends on !MODULES || !(MIPS || PPC || SUPERH || V850)
- help
- If you say Y here the resulting kernel image will be slightly larger
- but not slower, and it will give very useful debugging information.
- If you don't debug the kernel, you can say N, but we may not be able
- to solve problems without frame unwind information or frame pointers.
-
-config STACK_UNWIND
- bool "Stack unwind support"
- depends on UNWIND_INFO
- depends on X86
- help
- This enables more precise stack traces, omitting all unrelated
- occurrences of pointers into kernel code from the dump.
-
config FORCED_INLINING
bool "Force gcc to inline functions marked 'inline'"
depends on DEBUG_KERNEL
diff --git a/lib/fault-inject.c b/lib/fault-inject.c
index d143c0f..b5a90fc 100644
--- a/lib/fault-inject.c
+++ b/lib/fault-inject.c
@@ -55,37 +55,7 @@
#define MAX_STACK_TRACE_DEPTH 32
-#ifdef CONFIG_STACK_UNWIND
-
-static asmlinkage int fail_stacktrace_callback(struct unwind_frame_info *info,
- void *arg)
-{
- int depth;
- struct fault_attr *attr = arg;
- bool found = (attr->require_start == 0 && attr->require_end == ULONG_MAX);
-
- for (depth = 0; depth < attr->stacktrace_depth
- && unwind(info) == 0 && UNW_PC(info); depth++) {
- if (arch_unw_user_mode(info))
- break;
- if (attr->reject_start <= UNW_PC(info) &&
- UNW_PC(info) < attr->reject_end)
- return false;
- if (attr->require_start <= UNW_PC(info) &&
- UNW_PC(info) < attr->require_end)
- found = true;
- }
- return found;
-}
-
-static bool fail_stacktrace(struct fault_attr *attr)
-{
- struct unwind_frame_info info;
-
- return unwind_init_running(&info, fail_stacktrace_callback, attr);
-}
-
-#elif defined(CONFIG_STACKTRACE)
+#if defined(CONFIG_STACKTRACE)
static bool fail_stacktrace(struct fault_attr *attr)
{
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index a192276..84272ed 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -63,8 +63,11 @@
* @action: action that is happening (usually KOBJ_MOVE)
* @kobj: struct kobject that the action is happening to
* @envp_ext: pointer to environmental data
+ *
+ * Returns 0 if kobject_uevent() is completed with success or the
+ * corresponding error when it fails.
*/
-void kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
+int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
char *envp_ext[])
{
char **envp;
@@ -79,14 +82,16 @@
u64 seq;
char *seq_buff;
int i = 0;
- int retval;
+ int retval = 0;
int j;
pr_debug("%s\n", __FUNCTION__);
action_string = action_to_string(action);
- if (!action_string)
- return;
+ if (!action_string) {
+ pr_debug("kobject attempted to send uevent without action_string!\n");
+ return -EINVAL;
+ }
/* search the kset we belong to */
top_kobj = kobj;
@@ -95,31 +100,39 @@
top_kobj = top_kobj->parent;
} while (!top_kobj->kset && top_kobj->parent);
}
- if (!top_kobj->kset)
- return;
+ if (!top_kobj->kset) {
+ pr_debug("kobject attempted to send uevent without kset!\n");
+ return -EINVAL;
+ }
kset = top_kobj->kset;
uevent_ops = kset->uevent_ops;
/* skip the event, if the filter returns zero. */
if (uevent_ops && uevent_ops->filter)
- if (!uevent_ops->filter(kset, kobj))
- return;
+ if (!uevent_ops->filter(kset, kobj)) {
+ pr_debug("kobject filter function caused the event to drop!\n");
+ return 0;
+ }
/* environment index */
envp = kzalloc(NUM_ENVP * sizeof (char *), GFP_KERNEL);
if (!envp)
- return;
+ return -ENOMEM;
/* environment values */
buffer = kmalloc(BUFFER_SIZE, GFP_KERNEL);
- if (!buffer)
+ if (!buffer) {
+ retval = -ENOMEM;
goto exit;
+ }
/* complete object path */
devpath = kobject_get_path(kobj, GFP_KERNEL);
- if (!devpath)
+ if (!devpath) {
+ retval = -ENOENT;
goto exit;
+ }
/* originating subsystem */
if (uevent_ops && uevent_ops->name)
@@ -204,7 +217,7 @@
kfree(devpath);
kfree(buffer);
kfree(envp);
- return;
+ return retval;
}
EXPORT_SYMBOL_GPL(kobject_uevent_env);
@@ -214,10 +227,13 @@
*
* @action: action that is happening (usually KOBJ_ADD and KOBJ_REMOVE)
* @kobj: struct kobject that the action is happening to
+ *
+ * Returns 0 if kobject_uevent() is completed with success or the
+ * corresponding error when it fails.
*/
-void kobject_uevent(struct kobject *kobj, enum kobject_action action)
+int kobject_uevent(struct kobject *kobj, enum kobject_action action)
{
- kobject_uevent_env(kobj, action, NULL);
+ return kobject_uevent_env(kobj, action, NULL);
}
EXPORT_SYMBOL_GPL(kobject_uevent);
diff --git a/lib/kref.c b/lib/kref.c
index 4a467fa..0d07cc3 100644
--- a/lib/kref.c
+++ b/lib/kref.c
@@ -52,12 +52,7 @@
WARN_ON(release == NULL);
WARN_ON(release == (void (*)(struct kref *))kfree);
- /*
- * if current count is one, we are the last user and can release object
- * right now, avoiding an atomic operation on 'refcount'
- */
- if ((atomic_read(&kref->refcount) == 1) ||
- (atomic_dec_and_test(&kref->refcount))) {
+ if (atomic_dec_and_test(&kref->refcount)) {
release(kref);
return 1;
}
diff --git a/mm/mincore.c b/mm/mincore.c
index 7289078..8aca6f7 100644
--- a/mm/mincore.c
+++ b/mm/mincore.c
@@ -1,7 +1,7 @@
/*
* linux/mm/mincore.c
*
- * Copyright (C) 1994-1999 Linus Torvalds
+ * Copyright (C) 1994-2006 Linus Torvalds
*/
/*
@@ -38,46 +38,51 @@
return present;
}
-static long mincore_vma(struct vm_area_struct * vma,
- unsigned long start, unsigned long end, unsigned char __user * vec)
+/*
+ * Do a chunk of "sys_mincore()". We've already checked
+ * all the arguments, we hold the mmap semaphore: we should
+ * just return the amount of info we're asked for.
+ */
+static long do_mincore(unsigned long addr, unsigned char *vec, unsigned long pages)
{
- long error, i, remaining;
- unsigned char * tmp;
+ unsigned long i, nr, pgoff;
+ struct vm_area_struct *vma = find_vma(current->mm, addr);
- error = -ENOMEM;
+ /*
+ * find_vma() didn't find anything above us, or we're
+ * in an unmapped hole in the address space: ENOMEM.
+ */
+ if (!vma || addr < vma->vm_start)
+ return -ENOMEM;
+
+ /*
+ * Ok, got it. But check whether it's a segment we support
+ * mincore() on. Right now, we don't do any anonymous mappings.
+ *
+ * FIXME: This is just stupid. And returning ENOMEM is
+ * stupid too. We should just look at the page tables. But
+ * this is what we've traditionally done, so we'll just
+ * continue doing it.
+ */
if (!vma->vm_file)
- return error;
+ return -ENOMEM;
- start = ((start - vma->vm_start) >> PAGE_SHIFT) + vma->vm_pgoff;
- if (end > vma->vm_end)
- end = vma->vm_end;
- end = ((end - vma->vm_start) >> PAGE_SHIFT) + vma->vm_pgoff;
+ /*
+ * Calculate how many pages there are left in the vma, and
+ * what the pgoff is for our address.
+ */
+ nr = (vma->vm_end - addr) >> PAGE_SHIFT;
+ if (nr > pages)
+ nr = pages;
- error = -EAGAIN;
- tmp = (unsigned char *) __get_free_page(GFP_KERNEL);
- if (!tmp)
- return error;
+ pgoff = (addr - vma->vm_start) >> PAGE_SHIFT;
+ pgoff += vma->vm_pgoff;
- /* (end - start) is # of pages, and also # of bytes in "vec */
- remaining = (end - start),
+ /* And then we just fill the sucker in.. */
+ for (i = 0 ; i < nr; i++, pgoff++)
+ vec[i] = mincore_page(vma, pgoff);
- error = 0;
- for (i = 0; remaining > 0; remaining -= PAGE_SIZE, i++) {
- int j = 0;
- long thispiece = (remaining < PAGE_SIZE) ?
- remaining : PAGE_SIZE;
-
- while (j < thispiece)
- tmp[j++] = mincore_page(vma, start++);
-
- if (copy_to_user(vec + PAGE_SIZE * i, tmp, thispiece)) {
- error = -EFAULT;
- break;
- }
- }
-
- free_page((unsigned long) tmp);
- return error;
+ return nr;
}
/*
@@ -107,82 +112,50 @@
asmlinkage long sys_mincore(unsigned long start, size_t len,
unsigned char __user * vec)
{
- int index = 0;
- unsigned long end, limit;
- struct vm_area_struct * vma;
- size_t max;
- int unmapped_error = 0;
- long error;
+ long retval;
+ unsigned long pages;
+ unsigned char *tmp;
- /* check the arguments */
+ /* Check the start address: needs to be page-aligned.. */
if (start & ~PAGE_CACHE_MASK)
- goto einval;
+ return -EINVAL;
- limit = TASK_SIZE;
- if (start >= limit)
- goto enomem;
+ /* ..and we need to be passed a valid user-space range */
+ if (!access_ok(VERIFY_READ, (void __user *) start, len))
+ return -ENOMEM;
- if (!len)
- return 0;
+ /* This also avoids any overflows on PAGE_CACHE_ALIGN */
+ pages = len >> PAGE_SHIFT;
+ pages += (len & ~PAGE_MASK) != 0;
- max = limit - start;
- len = PAGE_CACHE_ALIGN(len);
- if (len > max || !len)
- goto enomem;
+ if (!access_ok(VERIFY_WRITE, vec, pages))
+ return -EFAULT;
- end = start + len;
+ tmp = (void *) __get_free_page(GFP_USER);
+ if (!tmp)
+ return -EAGAIN;
- /* check the output buffer whilst holding the lock */
- error = -EFAULT;
- down_read(¤t->mm->mmap_sem);
+ retval = 0;
+ while (pages) {
+ /*
+ * Do at most PAGE_SIZE entries per iteration, due to
+ * the temporary buffer size.
+ */
+ down_read(¤t->mm->mmap_sem);
+ retval = do_mincore(start, tmp, min(pages, PAGE_SIZE));
+ up_read(¤t->mm->mmap_sem);
- if (!access_ok(VERIFY_WRITE, vec, len >> PAGE_SHIFT))
- goto out;
-
- /*
- * If the interval [start,end) covers some unmapped address
- * ranges, just ignore them, but return -ENOMEM at the end.
- */
- error = 0;
-
- vma = find_vma(current->mm, start);
- while (vma) {
- /* Here start < vma->vm_end. */
- if (start < vma->vm_start) {
- unmapped_error = -ENOMEM;
- start = vma->vm_start;
+ if (retval <= 0)
+ break;
+ if (copy_to_user(vec, tmp, retval)) {
+ retval = -EFAULT;
+ break;
}
-
- /* Here vma->vm_start <= start < vma->vm_end. */
- if (end <= vma->vm_end) {
- if (start < end) {
- error = mincore_vma(vma, start, end,
- &vec[index]);
- if (error)
- goto out;
- }
- error = unmapped_error;
- goto out;
- }
-
- /* Here vma->vm_start <= start < vma->vm_end < end. */
- error = mincore_vma(vma, start, vma->vm_end, &vec[index]);
- if (error)
- goto out;
- index += (vma->vm_end - start) >> PAGE_CACHE_SHIFT;
- start = vma->vm_end;
- vma = vma->vm_next;
+ pages -= retval;
+ vec += retval;
+ start += retval << PAGE_SHIFT;
+ retval = 0;
}
-
- /* we found a hole in the area queried if we arrive here */
- error = -ENOMEM;
-
-out:
- up_read(¤t->mm->mmap_sem);
- return error;
-
-einval:
- return -EINVAL;
-enomem:
- return -ENOMEM;
+ free_page((unsigned long) tmp);
+ return retval;
}
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index 6cabf6d..42233df 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -1088,8 +1088,8 @@
/*
* FIXME: nonblock behaviour looks like it may have a bug.
*/
-static int ax25_connect(struct socket *sock, struct sockaddr *uaddr,
- int addr_len, int flags)
+static int __must_check ax25_connect(struct socket *sock,
+ struct sockaddr *uaddr, int addr_len, int flags)
{
struct sock *sk = sock->sk;
ax25_cb *ax25 = ax25_sk(sk), *ax25t;
diff --git a/net/ax25/ax25_iface.c b/net/ax25/ax25_iface.c
index 07ac020..aff3e65 100644
--- a/net/ax25/ax25_iface.c
+++ b/net/ax25/ax25_iface.c
@@ -29,17 +29,10 @@
#include <linux/mm.h>
#include <linux/interrupt.h>
-static struct protocol_struct {
- struct protocol_struct *next;
- unsigned int pid;
- int (*func)(struct sk_buff *, ax25_cb *);
-} *protocol_list = NULL;
+static struct ax25_protocol *protocol_list;
static DEFINE_RWLOCK(protocol_list_lock);
-static struct linkfail_struct {
- struct linkfail_struct *next;
- void (*func)(ax25_cb *, int);
-} *linkfail_list = NULL;
+static HLIST_HEAD(ax25_linkfail_list);
static DEFINE_SPINLOCK(linkfail_lock);
static struct listen_struct {
@@ -49,36 +42,23 @@
} *listen_list = NULL;
static DEFINE_SPINLOCK(listen_lock);
-int ax25_protocol_register(unsigned int pid,
- int (*func)(struct sk_buff *, ax25_cb *))
+/*
+ * Do not register the internal protocols AX25_P_TEXT, AX25_P_SEGMENT,
+ * AX25_P_IP or AX25_P_ARP ...
+ */
+void ax25_register_pid(struct ax25_protocol *ap)
{
- struct protocol_struct *protocol;
-
- if (pid == AX25_P_TEXT || pid == AX25_P_SEGMENT)
- return 0;
-#ifdef CONFIG_INET
- if (pid == AX25_P_IP || pid == AX25_P_ARP)
- return 0;
-#endif
- if ((protocol = kmalloc(sizeof(*protocol), GFP_ATOMIC)) == NULL)
- return 0;
-
- protocol->pid = pid;
- protocol->func = func;
-
write_lock_bh(&protocol_list_lock);
- protocol->next = protocol_list;
- protocol_list = protocol;
+ ap->next = protocol_list;
+ protocol_list = ap;
write_unlock_bh(&protocol_list_lock);
-
- return 1;
}
-EXPORT_SYMBOL(ax25_protocol_register);
+EXPORT_SYMBOL_GPL(ax25_register_pid);
void ax25_protocol_release(unsigned int pid)
{
- struct protocol_struct *s, *protocol;
+ struct ax25_protocol *s, *protocol;
write_lock_bh(&protocol_list_lock);
protocol = protocol_list;
@@ -110,54 +90,19 @@
EXPORT_SYMBOL(ax25_protocol_release);
-int ax25_linkfail_register(void (*func)(ax25_cb *, int))
+void ax25_linkfail_register(struct ax25_linkfail *lf)
{
- struct linkfail_struct *linkfail;
-
- if ((linkfail = kmalloc(sizeof(*linkfail), GFP_ATOMIC)) == NULL)
- return 0;
-
- linkfail->func = func;
-
spin_lock_bh(&linkfail_lock);
- linkfail->next = linkfail_list;
- linkfail_list = linkfail;
+ hlist_add_head(&lf->lf_node, &ax25_linkfail_list);
spin_unlock_bh(&linkfail_lock);
-
- return 1;
}
EXPORT_SYMBOL(ax25_linkfail_register);
-void ax25_linkfail_release(void (*func)(ax25_cb *, int))
+void ax25_linkfail_release(struct ax25_linkfail *lf)
{
- struct linkfail_struct *s, *linkfail;
-
spin_lock_bh(&linkfail_lock);
- linkfail = linkfail_list;
- if (linkfail == NULL) {
- spin_unlock_bh(&linkfail_lock);
- return;
- }
-
- if (linkfail->func == func) {
- linkfail_list = linkfail->next;
- spin_unlock_bh(&linkfail_lock);
- kfree(linkfail);
- return;
- }
-
- while (linkfail != NULL && linkfail->next != NULL) {
- if (linkfail->next->func == func) {
- s = linkfail->next;
- linkfail->next = linkfail->next->next;
- spin_unlock_bh(&linkfail_lock);
- kfree(s);
- return;
- }
-
- linkfail = linkfail->next;
- }
+ hlist_del_init(&lf->lf_node);
spin_unlock_bh(&linkfail_lock);
}
@@ -171,7 +116,7 @@
return 0;
if ((listen = kmalloc(sizeof(*listen), GFP_ATOMIC)) == NULL)
- return 0;
+ return -ENOMEM;
listen->callsign = *callsign;
listen->dev = dev;
@@ -181,7 +126,7 @@
listen_list = listen;
spin_unlock_bh(&listen_lock);
- return 1;
+ return 0;
}
EXPORT_SYMBOL(ax25_listen_register);
@@ -223,7 +168,7 @@
int (*ax25_protocol_function(unsigned int pid))(struct sk_buff *, ax25_cb *)
{
int (*res)(struct sk_buff *, ax25_cb *) = NULL;
- struct protocol_struct *protocol;
+ struct ax25_protocol *protocol;
read_lock(&protocol_list_lock);
for (protocol = protocol_list; protocol != NULL; protocol = protocol->next)
@@ -242,7 +187,8 @@
spin_lock_bh(&listen_lock);
for (listen = listen_list; listen != NULL; listen = listen->next)
- if (ax25cmp(&listen->callsign, callsign) == 0 && (listen->dev == dev || listen->dev == NULL)) {
+ if (ax25cmp(&listen->callsign, callsign) == 0 &&
+ (listen->dev == dev || listen->dev == NULL)) {
spin_unlock_bh(&listen_lock);
return 1;
}
@@ -253,17 +199,18 @@
void ax25_link_failed(ax25_cb *ax25, int reason)
{
- struct linkfail_struct *linkfail;
+ struct ax25_linkfail *lf;
+ struct hlist_node *node;
spin_lock_bh(&linkfail_lock);
- for (linkfail = linkfail_list; linkfail != NULL; linkfail = linkfail->next)
- (linkfail->func)(ax25, reason);
+ hlist_for_each_entry(lf, node, &ax25_linkfail_list, lf_node)
+ lf->func(ax25, reason);
spin_unlock_bh(&linkfail_lock);
}
int ax25_protocol_is_registered(unsigned int pid)
{
- struct protocol_struct *protocol;
+ struct ax25_protocol *protocol;
int res = 0;
read_lock_bh(&protocol_list_lock);
diff --git a/net/ax25/ax25_route.c b/net/ax25/ax25_route.c
index 8580356..0a03816 100644
--- a/net/ax25/ax25_route.c
+++ b/net/ax25/ax25_route.c
@@ -71,7 +71,7 @@
write_unlock(&ax25_route_lock);
}
-static int ax25_rt_add(struct ax25_routes_struct *route)
+static int __must_check ax25_rt_add(struct ax25_routes_struct *route)
{
ax25_route *ax25_rt;
ax25_dev *ax25_dev;
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 1aaff0a..2daa0dc 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1325,7 +1325,8 @@
/* Check for load limit; set rate_last to the latest sent
* redirect.
*/
- if (time_after(jiffies,
+ if (rt->u.dst.rate_tokens == 0 ||
+ time_after(jiffies,
(rt->u.dst.rate_last +
(ip_rt_redirect_load << rt->u.dst.rate_tokens)))) {
icmp_send(skb, ICMP_REDIRECT, ICMP_REDIR_HOST, rt->rt_gateway);
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index a1222d6..bf7a224 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -928,6 +928,7 @@
if (tp->md5sig_info->entries4 == 0) {
kfree(tp->md5sig_info->keys4);
tp->md5sig_info->keys4 = NULL;
+ tp->md5sig_info->alloced4 = 0;
} else if (tp->md5sig_info->entries4 != i) {
/* Need to do some manipulation */
memcpy(&tp->md5sig_info->keys4[i],
@@ -1185,7 +1186,7 @@
return 0;
if (hash_expected && !hash_location) {
- LIMIT_NETDEBUG(KERN_INFO "MD5 Hash NOT expected but found "
+ LIMIT_NETDEBUG(KERN_INFO "MD5 Hash expected but NOT found "
"(" NIPQUAD_FMT ", %d)->(" NIPQUAD_FMT ", %d)\n",
NIPQUAD(iph->saddr), ntohs(th->source),
NIPQUAD(iph->daddr), ntohs(th->dest));
diff --git a/net/ipv6/netfilter/Kconfig b/net/ipv6/netfilter/Kconfig
index fc3e5eb..adcd613 100644
--- a/net/ipv6/netfilter/Kconfig
+++ b/net/ipv6/netfilter/Kconfig
@@ -7,7 +7,7 @@
config NF_CONNTRACK_IPV6
tristate "IPv6 connection tracking support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && NF_CONNTRACK
+ depends on INET && IPV6 && EXPERIMENTAL && NF_CONNTRACK
---help---
Connection tracking keeps a record of what packets have passed
through your machine, in order to figure out how they are related
@@ -21,6 +21,7 @@
config IP6_NF_QUEUE
tristate "IP6 Userspace queueing via NETLINK (OBSOLETE)"
+ depends on INET && IPV6 && NETFILTER && EXPERIMENTAL
---help---
This option adds a queue handler to the kernel for IPv6
@@ -41,7 +42,7 @@
config IP6_NF_IPTABLES
tristate "IP6 tables support (required for filtering)"
- depends on NETFILTER_XTABLES
+ depends on INET && IPV6 && EXPERIMENTAL && NETFILTER_XTABLES
help
ip6tables is a general, extensible packet identification framework.
Currently only the packet filtering and packet mangling subsystem
diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index 1d50f80..43bbe2c 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -1377,6 +1377,15 @@
static struct net_device **dev_nr;
+static struct ax25_protocol nr_pid = {
+ .pid = AX25_P_NETROM,
+ .func = nr_route_frame
+};
+
+static struct ax25_linkfail nr_linkfail_notifier = {
+ .func = nr_link_failed,
+};
+
static int __init nr_proto_init(void)
{
int i;
@@ -1424,8 +1433,8 @@
register_netdevice_notifier(&nr_dev_notifier);
- ax25_protocol_register(AX25_P_NETROM, nr_route_frame);
- ax25_linkfail_register(nr_link_failed);
+ ax25_register_pid(&nr_pid);
+ ax25_linkfail_register(&nr_linkfail_notifier);
#ifdef CONFIG_SYSCTL
nr_register_sysctl();
@@ -1474,7 +1483,7 @@
nr_unregister_sysctl();
#endif
- ax25_linkfail_release(nr_link_failed);
+ ax25_linkfail_release(&nr_linkfail_notifier);
ax25_protocol_release(AX25_P_NETROM);
unregister_netdevice_notifier(&nr_dev_notifier);
diff --git a/net/netrom/nr_dev.c b/net/netrom/nr_dev.c
index 9b8eb54..4700d52 100644
--- a/net/netrom/nr_dev.c
+++ b/net/netrom/nr_dev.c
@@ -128,25 +128,37 @@
return -37;
}
-static int nr_set_mac_address(struct net_device *dev, void *addr)
+static int __must_check nr_set_mac_address(struct net_device *dev, void *addr)
{
struct sockaddr *sa = addr;
+ int err;
- if (dev->flags & IFF_UP)
+ if (!memcmp(dev->dev_addr, sa->sa_data, dev->addr_len))
+ return 0;
+
+ if (dev->flags & IFF_UP) {
+ err = ax25_listen_register((ax25_address *)sa->sa_data, NULL);
+ if (err)
+ return err;
+
ax25_listen_release((ax25_address *)dev->dev_addr, NULL);
+ }
memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
- if (dev->flags & IFF_UP)
- ax25_listen_register((ax25_address *)dev->dev_addr, NULL);
-
return 0;
}
static int nr_open(struct net_device *dev)
{
+ int err;
+
+ err = ax25_listen_register((ax25_address *)dev->dev_addr, NULL);
+ if (err)
+ return err;
+
netif_start_queue(dev);
- ax25_listen_register((ax25_address *)dev->dev_addr, NULL);
+
return 0;
}
diff --git a/net/netrom/nr_route.c b/net/netrom/nr_route.c
index 0096105..8f88964 100644
--- a/net/netrom/nr_route.c
+++ b/net/netrom/nr_route.c
@@ -87,8 +87,9 @@
* Add a new route to a node, and in the process add the node and the
* neighbour if it is new.
*/
-static int nr_add_node(ax25_address *nr, const char *mnemonic, ax25_address *ax25,
- ax25_digi *ax25_digi, struct net_device *dev, int quality, int obs_count)
+static int __must_check nr_add_node(ax25_address *nr, const char *mnemonic,
+ ax25_address *ax25, ax25_digi *ax25_digi, struct net_device *dev,
+ int quality, int obs_count)
{
struct nr_node *nr_node;
struct nr_neigh *nr_neigh;
@@ -406,7 +407,8 @@
/*
* Lock a neighbour with a quality.
*/
-static int nr_add_neigh(ax25_address *callsign, ax25_digi *ax25_digi, struct net_device *dev, unsigned int quality)
+static int __must_check nr_add_neigh(ax25_address *callsign,
+ ax25_digi *ax25_digi, struct net_device *dev, unsigned int quality)
{
struct nr_neigh *nr_neigh;
@@ -777,9 +779,13 @@
nr_src = (ax25_address *)(skb->data + 0);
nr_dest = (ax25_address *)(skb->data + 7);
- if (ax25 != NULL)
- nr_add_node(nr_src, "", &ax25->dest_addr, ax25->digipeat,
- ax25->ax25_dev->dev, 0, sysctl_netrom_obsolescence_count_initialiser);
+ if (ax25 != NULL) {
+ ret = nr_add_node(nr_src, "", &ax25->dest_addr, ax25->digipeat,
+ ax25->ax25_dev->dev, 0,
+ sysctl_netrom_obsolescence_count_initialiser);
+ if (ret)
+ return ret;
+ }
if ((dev = nr_dev_get(nr_dest)) != NULL) { /* Its for me */
if (ax25 == NULL) /* Its from me */
@@ -844,6 +850,7 @@
ret = (nr_neigh->ax25 != NULL);
nr_node_unlock(nr_node);
nr_node_put(nr_node);
+
return ret;
}
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index 08a5428..9e27946 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -1314,7 +1314,8 @@
if (copy_from_user(&rose_callsign, argp, sizeof(ax25_address)))
return -EFAULT;
if (ax25cmp(&rose_callsign, &null_ax25_address) != 0)
- ax25_listen_register(&rose_callsign, NULL);
+ return ax25_listen_register(&rose_callsign, NULL);
+
return 0;
case SIOCRSGL2CALL:
@@ -1481,6 +1482,15 @@
static struct net_device **dev_rose;
+static struct ax25_protocol rose_pid = {
+ .pid = AX25_P_ROSE,
+ .func = rose_route_frame
+};
+
+static struct ax25_linkfail rose_linkfail_notifier = {
+ .func = rose_link_failed
+};
+
static int __init rose_proto_init(void)
{
int i;
@@ -1530,8 +1540,8 @@
sock_register(&rose_family_ops);
register_netdevice_notifier(&rose_dev_notifier);
- ax25_protocol_register(AX25_P_ROSE, rose_route_frame);
- ax25_linkfail_register(rose_link_failed);
+ ax25_register_pid(&rose_pid);
+ ax25_linkfail_register(&rose_linkfail_notifier);
#ifdef CONFIG_SYSCTL
rose_register_sysctl();
@@ -1579,7 +1589,7 @@
rose_rt_free();
ax25_protocol_release(AX25_P_ROSE);
- ax25_linkfail_release(rose_link_failed);
+ ax25_linkfail_release(&rose_linkfail_notifier);
if (ax25cmp(&rose_callsign, &null_ax25_address) != 0)
ax25_listen_release(&rose_callsign, NULL);
diff --git a/net/rose/rose_dev.c b/net/rose/rose_dev.c
index 7c279e2..50824d3 100644
--- a/net/rose/rose_dev.c
+++ b/net/rose/rose_dev.c
@@ -93,20 +93,34 @@
static int rose_set_mac_address(struct net_device *dev, void *addr)
{
struct sockaddr *sa = addr;
+ int err;
- rose_del_loopback_node((rose_address *)dev->dev_addr);
+ if (!memcpy(dev->dev_addr, sa->sa_data, dev->addr_len))
+ return 0;
+
+ if (dev->flags & IFF_UP) {
+ err = rose_add_loopback_node((rose_address *)dev->dev_addr);
+ if (err)
+ return err;
+
+ rose_del_loopback_node((rose_address *)dev->dev_addr);
+ }
memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
- rose_add_loopback_node((rose_address *)dev->dev_addr);
-
return 0;
}
static int rose_open(struct net_device *dev)
{
+ int err;
+
+ err = rose_add_loopback_node((rose_address *)dev->dev_addr);
+ if (err)
+ return err;
+
netif_start_queue(dev);
- rose_add_loopback_node((rose_address *)dev->dev_addr);
+
return 0;
}
diff --git a/net/rose/rose_loopback.c b/net/rose/rose_loopback.c
index 103b4d3..3e41bd9 100644
--- a/net/rose/rose_loopback.c
+++ b/net/rose/rose_loopback.c
@@ -79,7 +79,8 @@
skb->h.raw = skb->data;
- if ((sk = rose_find_socket(lci_o, rose_loopback_neigh)) != NULL) {
+ sk = rose_find_socket(lci_o, &rose_loopback_neigh);
+ if (sk) {
if (rose_process_rx_frame(sk, skb) == 0)
kfree_skb(skb);
continue;
@@ -87,7 +88,7 @@
if (frametype == ROSE_CALL_REQUEST) {
if ((dev = rose_dev_get(dest)) != NULL) {
- if (rose_rx_call_request(skb, dev, rose_loopback_neigh, lci_o) == 0)
+ if (rose_rx_call_request(skb, dev, &rose_loopback_neigh, lci_o) == 0)
kfree_skb(skb);
} else {
kfree_skb(skb);
diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c
index 7252344..8028c0d 100644
--- a/net/rose/rose_route.c
+++ b/net/rose/rose_route.c
@@ -46,13 +46,13 @@
static struct rose_route *rose_route_list;
static DEFINE_SPINLOCK(rose_route_list_lock);
-struct rose_neigh *rose_loopback_neigh;
+struct rose_neigh rose_loopback_neigh;
/*
* Add a new route to a node, and in the process add the node and the
* neighbour if it is new.
*/
-static int rose_add_node(struct rose_route_struct *rose_route,
+static int __must_check rose_add_node(struct rose_route_struct *rose_route,
struct net_device *dev)
{
struct rose_node *rose_node, *rose_tmpn, *rose_tmpp;
@@ -361,33 +361,30 @@
/*
* Add the loopback neighbour.
*/
-int rose_add_loopback_neigh(void)
+void rose_add_loopback_neigh(void)
{
- if ((rose_loopback_neigh = kmalloc(sizeof(struct rose_neigh), GFP_ATOMIC)) == NULL)
- return -ENOMEM;
+ struct rose_neigh *sn = &rose_loopback_neigh;
- rose_loopback_neigh->callsign = null_ax25_address;
- rose_loopback_neigh->digipeat = NULL;
- rose_loopback_neigh->ax25 = NULL;
- rose_loopback_neigh->dev = NULL;
- rose_loopback_neigh->count = 0;
- rose_loopback_neigh->use = 0;
- rose_loopback_neigh->dce_mode = 1;
- rose_loopback_neigh->loopback = 1;
- rose_loopback_neigh->number = rose_neigh_no++;
- rose_loopback_neigh->restarted = 1;
+ sn->callsign = null_ax25_address;
+ sn->digipeat = NULL;
+ sn->ax25 = NULL;
+ sn->dev = NULL;
+ sn->count = 0;
+ sn->use = 0;
+ sn->dce_mode = 1;
+ sn->loopback = 1;
+ sn->number = rose_neigh_no++;
+ sn->restarted = 1;
- skb_queue_head_init(&rose_loopback_neigh->queue);
+ skb_queue_head_init(&sn->queue);
- init_timer(&rose_loopback_neigh->ftimer);
- init_timer(&rose_loopback_neigh->t0timer);
+ init_timer(&sn->ftimer);
+ init_timer(&sn->t0timer);
spin_lock_bh(&rose_neigh_list_lock);
- rose_loopback_neigh->next = rose_neigh_list;
- rose_neigh_list = rose_loopback_neigh;
+ sn->next = rose_neigh_list;
+ rose_neigh_list = sn;
spin_unlock_bh(&rose_neigh_list_lock);
-
- return 0;
}
/*
@@ -421,13 +418,13 @@
rose_node->mask = 10;
rose_node->count = 1;
rose_node->loopback = 1;
- rose_node->neighbour[0] = rose_loopback_neigh;
+ rose_node->neighbour[0] = &rose_loopback_neigh;
/* Insert at the head of list. Address is always mask=10 */
rose_node->next = rose_node_list;
rose_node_list = rose_node;
- rose_loopback_neigh->count++;
+ rose_loopback_neigh.count++;
out:
spin_unlock_bh(&rose_node_list_lock);
@@ -458,7 +455,7 @@
rose_remove_node(rose_node);
- rose_loopback_neigh->count--;
+ rose_loopback_neigh.count--;
out:
spin_unlock_bh(&rose_node_list_lock);
diff --git a/sound/aoa/codecs/snd-aoa-codec-onyx.h b/sound/aoa/codecs/snd-aoa-codec-onyx.h
index aeedda7..ffd2025 100644
--- a/sound/aoa/codecs/snd-aoa-codec-onyx.h
+++ b/sound/aoa/codecs/snd-aoa-codec-onyx.h
@@ -9,7 +9,6 @@
#define __SND_AOA_CODEC_ONYX_H
#include <stddef.h>
#include <linux/i2c.h>
-#include <linux/i2c-dev.h>
#include <asm/pmac_low_i2c.h>
#include <asm/prom.h>
diff --git a/sound/aoa/codecs/snd-aoa-codec-tas.c b/sound/aoa/codecs/snd-aoa-codec-tas.c
index 9de8485b..2cd81fa 100644
--- a/sound/aoa/codecs/snd-aoa-codec-tas.c
+++ b/sound/aoa/codecs/snd-aoa-codec-tas.c
@@ -61,7 +61,6 @@
*/
#include <stddef.h>
#include <linux/i2c.h>
-#include <linux/i2c-dev.h>
#include <asm/pmac_low_i2c.h>
#include <asm/prom.h>
#include <linux/delay.h>
diff --git a/sound/core/control.c b/sound/core/control.c
index 48ef0a0..0c7bcd6 100644
--- a/sound/core/control.c
+++ b/sound/core/control.c
@@ -1275,7 +1275,7 @@
schedule();
remove_wait_queue(&ctl->change_sleep, &wait);
if (signal_pending(current))
- return result > 0 ? result : -ERESTARTSYS;
+ return -ERESTARTSYS;
spin_lock_irq(&ctl->read_lock);
}
kev = snd_kctl_event(ctl->events.next);
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index e0821eb..786a82e 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -810,6 +810,8 @@
struct snd_mask sformat_mask;
struct snd_mask mask;
+ if (mutex_lock_interruptible(&runtime->oss.params_lock))
+ return -EINTR;
sw_params = kmalloc(sizeof(*sw_params), GFP_KERNEL);
params = kmalloc(sizeof(*params), GFP_KERNEL);
sparams = kmalloc(sizeof(*sparams), GFP_KERNEL);
@@ -1020,6 +1022,7 @@
kfree(sw_params);
kfree(params);
kfree(sparams);
+ mutex_unlock(&runtime->oss.params_lock);
return err;
}
@@ -1307,14 +1310,17 @@
if ((tmp = snd_pcm_oss_make_ready(substream)) < 0)
return tmp;
+ mutex_lock(&runtime->oss.params_lock);
while (bytes > 0) {
if (bytes < runtime->oss.period_bytes || runtime->oss.buffer_used > 0) {
tmp = bytes;
if (tmp + runtime->oss.buffer_used > runtime->oss.period_bytes)
tmp = runtime->oss.period_bytes - runtime->oss.buffer_used;
if (tmp > 0) {
- if (copy_from_user(runtime->oss.buffer + runtime->oss.buffer_used, buf, tmp))
- return xfer > 0 ? (snd_pcm_sframes_t)xfer : -EFAULT;
+ if (copy_from_user(runtime->oss.buffer + runtime->oss.buffer_used, buf, tmp)) {
+ tmp = -EFAULT;
+ goto err;
+ }
}
runtime->oss.buffer_used += tmp;
buf += tmp;
@@ -1325,22 +1331,24 @@
tmp = snd_pcm_oss_write2(substream, runtime->oss.buffer + runtime->oss.period_ptr,
runtime->oss.buffer_used - runtime->oss.period_ptr, 1);
if (tmp <= 0)
- return xfer > 0 ? (snd_pcm_sframes_t)xfer : tmp;
+ goto err;
runtime->oss.bytes += tmp;
runtime->oss.period_ptr += tmp;
runtime->oss.period_ptr %= runtime->oss.period_bytes;
if (runtime->oss.period_ptr == 0 ||
runtime->oss.period_ptr == runtime->oss.buffer_used)
runtime->oss.buffer_used = 0;
- else if ((substream->f_flags & O_NONBLOCK) != 0)
- return xfer > 0 ? xfer : -EAGAIN;
+ else if ((substream->f_flags & O_NONBLOCK) != 0) {
+ tmp = -EAGAIN;
+ goto err;
+ }
}
} else {
tmp = snd_pcm_oss_write2(substream,
(const char __force *)buf,
runtime->oss.period_bytes, 0);
if (tmp <= 0)
- return xfer > 0 ? (snd_pcm_sframes_t)xfer : tmp;
+ goto err;
runtime->oss.bytes += tmp;
buf += tmp;
bytes -= tmp;
@@ -1350,7 +1358,12 @@
break;
}
}
+ mutex_unlock(&runtime->oss.params_lock);
return xfer;
+
+ err:
+ mutex_unlock(&runtime->oss.params_lock);
+ return xfer > 0 ? (snd_pcm_sframes_t)xfer : tmp;
}
static ssize_t snd_pcm_oss_read2(struct snd_pcm_substream *substream, char *buf, size_t bytes, int in_kernel)
@@ -1397,12 +1410,13 @@
if ((tmp = snd_pcm_oss_make_ready(substream)) < 0)
return tmp;
+ mutex_lock(&runtime->oss.params_lock);
while (bytes > 0) {
if (bytes < runtime->oss.period_bytes || runtime->oss.buffer_used > 0) {
if (runtime->oss.buffer_used == 0) {
tmp = snd_pcm_oss_read2(substream, runtime->oss.buffer, runtime->oss.period_bytes, 1);
if (tmp <= 0)
- return xfer > 0 ? (snd_pcm_sframes_t)xfer : tmp;
+ goto err;
runtime->oss.bytes += tmp;
runtime->oss.period_ptr = tmp;
runtime->oss.buffer_used = tmp;
@@ -1410,8 +1424,10 @@
tmp = bytes;
if ((size_t) tmp > runtime->oss.buffer_used)
tmp = runtime->oss.buffer_used;
- if (copy_to_user(buf, runtime->oss.buffer + (runtime->oss.period_ptr - runtime->oss.buffer_used), tmp))
- return xfer > 0 ? (snd_pcm_sframes_t)xfer : -EFAULT;
+ if (copy_to_user(buf, runtime->oss.buffer + (runtime->oss.period_ptr - runtime->oss.buffer_used), tmp)) {
+ tmp = -EFAULT;
+ goto err;
+ }
buf += tmp;
bytes -= tmp;
xfer += tmp;
@@ -1420,14 +1436,19 @@
tmp = snd_pcm_oss_read2(substream, (char __force *)buf,
runtime->oss.period_bytes, 0);
if (tmp <= 0)
- return xfer > 0 ? (snd_pcm_sframes_t)xfer : tmp;
+ goto err;
runtime->oss.bytes += tmp;
buf += tmp;
bytes -= tmp;
xfer += tmp;
}
}
+ mutex_unlock(&runtime->oss.params_lock);
return xfer;
+
+ err:
+ mutex_unlock(&runtime->oss.params_lock);
+ return xfer > 0 ? (snd_pcm_sframes_t)xfer : tmp;
}
static int snd_pcm_oss_reset(struct snd_pcm_oss_file *pcm_oss_file)
@@ -1528,6 +1549,7 @@
return err;
format = snd_pcm_oss_format_from(runtime->oss.format);
width = snd_pcm_format_physical_width(format);
+ mutex_lock(&runtime->oss.params_lock);
if (runtime->oss.buffer_used > 0) {
#ifdef OSS_DEBUG
printk("sync: buffer_used\n");
@@ -1537,8 +1559,10 @@
runtime->oss.buffer + runtime->oss.buffer_used,
size);
err = snd_pcm_oss_sync1(substream, runtime->oss.period_bytes);
- if (err < 0)
+ if (err < 0) {
+ mutex_unlock(&runtime->oss.params_lock);
return err;
+ }
} else if (runtime->oss.period_ptr > 0) {
#ifdef OSS_DEBUG
printk("sync: period_ptr\n");
@@ -1548,8 +1572,10 @@
runtime->oss.buffer,
size * 8 / width);
err = snd_pcm_oss_sync1(substream, size);
- if (err < 0)
+ if (err < 0) {
+ mutex_unlock(&runtime->oss.params_lock);
return err;
+ }
}
/*
* The ALSA's period might be a bit large than OSS one.
@@ -1579,6 +1605,7 @@
snd_pcm_lib_writev(substream, buffers, size);
}
}
+ mutex_unlock(&runtime->oss.params_lock);
/*
* finish sync: drain the buffer
*/
@@ -2172,6 +2199,7 @@
runtime->oss.params = 1;
runtime->oss.trigger = 1;
runtime->oss.rate = 8000;
+ mutex_init(&runtime->oss.params_lock);
switch (SNDRV_MINOR_OSS_DEVICE(minor)) {
case SNDRV_MINOR_OSS_PCM_8:
runtime->oss.format = AFMT_U8;
diff --git a/sound/core/pcm.c b/sound/core/pcm.c
index 5ac6e19..8e01898 100644
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -640,6 +640,10 @@
err = snd_pcm_substream_proc_init(substream);
if (err < 0) {
snd_printk(KERN_ERR "Error in snd_pcm_stream_proc_init\n");
+ if (prev == NULL)
+ pstr->substream = NULL;
+ else
+ prev->next = NULL;
kfree(substream);
return err;
}
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index 0bb142a..b336797 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -79,19 +79,17 @@
runtime->silence_filled -= frames;
if ((snd_pcm_sframes_t)runtime->silence_filled < 0) {
runtime->silence_filled = 0;
- runtime->silence_start = (ofs + frames) - runtime->buffer_size;
+ runtime->silence_start = new_hw_ptr;
} else {
- runtime->silence_start = ofs - runtime->silence_filled;
+ runtime->silence_start = ofs;
}
- if ((snd_pcm_sframes_t)runtime->silence_start < 0)
- runtime->silence_start += runtime->boundary;
}
frames = runtime->buffer_size - runtime->silence_filled;
}
snd_assert(frames <= runtime->buffer_size, return);
if (frames == 0)
return;
- ofs = (runtime->silence_start + runtime->silence_filled) % runtime->buffer_size;
+ ofs = runtime->silence_start % runtime->buffer_size;
while (frames > 0) {
transfer = ofs + frames > runtime->buffer_size ? runtime->buffer_size - ofs : frames;
if (runtime->access == SNDRV_PCM_ACCESS_RW_INTERLEAVED ||
diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c
index 269c467..0f055bf 100644
--- a/sound/core/rawmidi.c
+++ b/sound/core/rawmidi.c
@@ -1385,7 +1385,6 @@
struct snd_rawmidi_substream *substream;
int idx;
- INIT_LIST_HEAD(&stream->substreams);
for (idx = 0; idx < count; idx++) {
substream = kzalloc(sizeof(*substream), GFP_KERNEL);
if (substream == NULL) {
@@ -1440,6 +1439,9 @@
rmidi->device = device;
mutex_init(&rmidi->open_mutex);
init_waitqueue_head(&rmidi->open_wait);
+ INIT_LIST_HEAD(&rmidi->streams[SNDRV_RAWMIDI_STREAM_INPUT].substreams);
+ INIT_LIST_HEAD(&rmidi->streams[SNDRV_RAWMIDI_STREAM_OUTPUT].substreams);
+
if (id != NULL)
strlcpy(rmidi->id, id, sizeof(rmidi->id));
if ((err = snd_rawmidi_alloc_substreams(rmidi,
diff --git a/sound/core/seq/seq_memory.c b/sound/core/seq/seq_memory.c
index 4bffe50..a3dc5e0 100644
--- a/sound/core/seq/seq_memory.c
+++ b/sound/core/seq/seq_memory.c
@@ -151,7 +151,7 @@
return len;
newlen = len;
if (size_aligned > 0)
- newlen = ((len + size_aligned - 1) / size_aligned) * size_aligned;
+ newlen = roundup(len, size_aligned);
if (count < newlen)
return -EAGAIN;
diff --git a/sound/core/sgbuf.c b/sound/core/sgbuf.c
index c30669f..cefd228 100644
--- a/sound/core/sgbuf.c
+++ b/sound/core/sgbuf.c
@@ -27,7 +27,7 @@
/* table entries are align to 32 */
#define SGBUF_TBL_ALIGN 32
-#define sgbuf_align_table(tbl) ((((tbl) + SGBUF_TBL_ALIGN - 1) / SGBUF_TBL_ALIGN) * SGBUF_TBL_ALIGN)
+#define sgbuf_align_table(tbl) ALIGN((tbl), SGBUF_TBL_ALIGN)
int snd_free_sgbuf_pages(struct snd_dma_buffer *dmab)
{
diff --git a/sound/isa/gus/gus_mem.c b/sound/isa/gus/gus_mem.c
index f50c276..7107753 100644
--- a/sound/isa/gus/gus_mem.c
+++ b/sound/isa/gus/gus_mem.c
@@ -143,9 +143,8 @@
struct snd_gf1_mem_block *pblock;
unsigned int ptr1, ptr2;
- align--;
- if (w_16 && align < 1)
- align = 1;
+ if (w_16 && align < 2)
+ align = 2;
block->flags = w_16 ? SNDRV_GF1_MEM_BLOCK_16BIT : 0;
block->owner = SNDRV_GF1_MEM_OWNER_DRIVER;
block->share = 0;
@@ -165,7 +164,7 @@
if (pblock->next->ptr < boundary)
ptr2 = pblock->next->ptr;
}
- ptr1 = (pblock->ptr + pblock->size + align) & ~align;
+ ptr1 = ALIGN(pblock->ptr + pblock->size, align);
if (ptr1 >= ptr2)
continue;
size1 = ptr2 - ptr1;
diff --git a/sound/isa/sb/sb_common.c b/sound/isa/sb/sb_common.c
index c62a9e3..3094f38 100644
--- a/sound/isa/sb/sb_common.c
+++ b/sound/isa/sb/sb_common.c
@@ -232,7 +232,7 @@
chip->port = port;
if (request_irq(irq, irq_handler, hardware == SB_HW_ALS4000 ?
- IRQF_DISABLED | IRQF_SHARED : IRQF_DISABLED,
+ IRQF_SHARED : IRQF_DISABLED,
"SoundBlaster", (void *) chip)) {
snd_printk(KERN_ERR "sb: can't grab irq %d\n", irq);
snd_sbdsp_free(chip);
diff --git a/sound/isa/wavefront/wavefront_synth.c b/sound/isa/wavefront/wavefront_synth.c
index bed329e..78020d8 100644
--- a/sound/isa/wavefront/wavefront_synth.c
+++ b/sound/isa/wavefront/wavefront_synth.c
@@ -1068,7 +1068,7 @@
blocksize = max_blksize;
} else {
/* round to nearest 16-byte value */
- blocksize = ((length-written+7)&~0x7);
+ blocksize = ALIGN(length - written, 8);
}
if (snd_wavefront_cmd (dev, WFC_DOWNLOAD_BLOCK, NULL, NULL)) {
diff --git a/sound/oss/dmasound/tas3001c.c b/sound/oss/dmasound/tas3001c.c
index f227c9f..2f21a3c 100644
--- a/sound/oss/dmasound/tas3001c.c
+++ b/sound/oss/dmasound/tas3001c.c
@@ -50,6 +50,7 @@
int output_id;
int speaker_id;
struct tas_drce_t drce_state;
+ struct work_struct change;
};
@@ -667,14 +668,13 @@
}
static void
-tas3001c_device_change_handler(void *self)
+tas3001c_device_change_handler(struct work_struct *work)
{
- if (self)
- tas3001c_update_device_parameters(self);
+ struct tas3001c_data_t *self;
+ self = container_of(work, struct tas3001c_data_t, change);
+ tas3001c_update_device_parameters(self);
}
-static struct work_struct device_change;
-
static int
tas3001c_output_device_change( struct tas3001c_data_t *self,
int device_id,
@@ -685,7 +685,7 @@
self->output_id=output_id;
self->speaker_id=speaker_id;
- schedule_work(&device_change);
+ schedule_work(&self->change);
return 0;
}
@@ -823,7 +823,7 @@
tas3001c_write_biquad_shadow(self, i, j,
&tas3001c_eq_unity);
- INIT_WORK(&device_change, tas3001c_device_change_handler, self);
+ INIT_WORK(&self->change, tas3001c_device_change_handler);
return 0;
}
diff --git a/sound/oss/dmasound/tas3004.c b/sound/oss/dmasound/tas3004.c
index 82eaaca..af34fb3 100644
--- a/sound/oss/dmasound/tas3004.c
+++ b/sound/oss/dmasound/tas3004.c
@@ -48,6 +48,7 @@
int output_id;
int speaker_id;
struct tas_drce_t drce_state;
+ struct work_struct change;
};
#define MAKE_TIME(sec,usec) (((sec)<<12) + (50000+(usec/10)*(1<<12))/100000)
@@ -914,15 +915,13 @@
}
static void
-tas3004_device_change_handler(void *self)
+tas3004_device_change_handler(struct work_struct *work)
{
- if (!self) return;
-
- tas3004_update_device_parameters((struct tas3004_data_t *)self);
+ struct tas3004_data_t *self;
+ self = container_of(work, struct tas3004_data_t, change);
+ tas3004_update_device_parameters(self);
}
-static struct work_struct device_change;
-
static int
tas3004_output_device_change( struct tas3004_data_t *self,
int device_id,
@@ -933,7 +932,7 @@
self->output_id=output_id;
self->speaker_id=speaker_id;
- schedule_work(&device_change);
+ schedule_work(&self->change);
return 0;
}
@@ -1112,7 +1111,7 @@
tas3004_write_register(self, TAS3004_REG_MCR2, &mcr2, WRITE_SHADOW);
tas3004_write_register(self, TAS3004_REG_DRC, drce_init, WRITE_SHADOW);
- INIT_WORK(&device_change, tas3004_device_change_handler, self);
+ INIT_WORK(&self->change, tas3004_device_change_handler);
return 0;
}
diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c
index 7abcb10..d2994cb 100644
--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -129,9 +129,9 @@
{ 0x434d4941, 0xffffffff, "CMI9738", patch_cm9738, NULL },
{ 0x434d4961, 0xffffffff, "CMI9739", patch_cm9739, NULL },
{ 0x434d4969, 0xffffffff, "CMI9780", patch_cm9780, NULL },
-{ 0x434d4978, 0xffffffff, "CMI9761", patch_cm9761, NULL },
-{ 0x434d4982, 0xffffffff, "CMI9761", patch_cm9761, NULL },
-{ 0x434d4983, 0xffffffff, "CMI9761", patch_cm9761, NULL },
+{ 0x434d4978, 0xffffffff, "CMI9761A", patch_cm9761, NULL },
+{ 0x434d4982, 0xffffffff, "CMI9761B", patch_cm9761, NULL },
+{ 0x434d4983, 0xffffffff, "CMI9761A+", patch_cm9761, NULL },
{ 0x43525900, 0xfffffff8, "CS4297", NULL, NULL },
{ 0x43525910, 0xfffffff8, "CS4297A", patch_cirrus_spdif, NULL },
{ 0x43525920, 0xfffffff8, "CS4298", patch_cirrus_spdif, NULL },
@@ -382,7 +382,7 @@
unsigned short old, new;
old = snd_ac97_read_cache(ac97, reg);
- new = (old & ~mask) | value;
+ new = (old & ~mask) | (value & mask);
change = old != new;
if (change) {
ac97->regs[reg] = new;
@@ -399,7 +399,7 @@
mutex_lock(&ac97->page_mutex);
old = ac97->spec.ad18xx.pcmreg[codec];
- new = (old & ~mask) | value;
+ new = (old & ~mask) | (value & mask);
change = old != new;
if (change) {
mutex_lock(&ac97->reg_mutex);
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index 15be6ba..e813968 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -1467,7 +1467,9 @@
snd_ac97_write_cache(ac97, AC97_AD_CODEC_CFG, 0x0002); // ID1C
ac97->spec.ad18xx.codec_cfg[unchained_idx] = 0x0002;
if (cidx1 >= 0) {
- if (patch_ad1881_chained1(ac97, cidx1, 0x0006)) // SDIE | ID1C
+ if (cidx2 < 0)
+ patch_ad1881_chained1(ac97, cidx1, 0);
+ else if (patch_ad1881_chained1(ac97, cidx1, 0x0006)) // SDIE | ID1C
patch_ad1881_chained1(ac97, cidx2, 0);
else if (patch_ad1881_chained1(ac97, cidx2, 0x0006)) // SDIE | ID1C
patch_ad1881_chained1(ac97, cidx1, 0);
@@ -2261,7 +2263,8 @@
else { /* ALC655 */
if (ac97->subsystem_vendor == 0x1462 &&
(ac97->subsystem_device == 0x0131 || /* MSI S270 laptop */
- ac97->subsystem_device == 0x0161)) /* LG K1 Express */
+ ac97->subsystem_device == 0x0161 || /* LG K1 Express */
+ ac97->subsystem_device == 0x0351)) /* MSI L725 laptop */
val &= ~(1 << 1); /* Pin 47 is EAPD (for internal speaker) */
else
val |= (1 << 1); /* Pin 47 is spdif input pin */
diff --git a/sound/pci/ad1889.c b/sound/pci/ad1889.c
index cbf8331c..98970d4 100644
--- a/sound/pci/ad1889.c
+++ b/sound/pci/ad1889.c
@@ -858,7 +858,7 @@
synchronize_irq(chip->irq);
if (chip->irq >= 0)
- free_irq(chip->irq, (void*)chip);
+ free_irq(chip->irq, chip);
skip_hw:
if (chip->iobase)
@@ -945,7 +945,7 @@
spin_lock_init(&chip->lock); /* only now can we call ad1889_free */
if (request_irq(pci->irq, snd_ad1889_interrupt,
- IRQF_DISABLED|IRQF_SHARED, card->driver, (void*)chip)) {
+ IRQF_SHARED, card->driver, chip)) {
printk(KERN_ERR PFX "cannot obtain IRQ %d\n", pci->irq);
snd_ad1889_free(chip);
return -EBUSY;
diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c
index a7edd56..9327ab2 100644
--- a/sound/pci/ali5451/ali5451.c
+++ b/sound/pci/ali5451/ali5451.c
@@ -2095,7 +2095,7 @@
snd_ali_disable_address_interrupt(codec);
if (codec->irq >= 0) {
synchronize_irq(codec->irq);
- free_irq(codec->irq, (void *)codec);
+ free_irq(codec->irq, codec);
}
if (codec->port)
pci_release_regions(codec->pci);
@@ -2192,7 +2192,8 @@
return err;
codec->port = pci_resource_start(codec->pci, 0);
- if (request_irq(codec->pci->irq, snd_ali_card_interrupt, IRQF_DISABLED|IRQF_SHARED, "ALI 5451", (void *)codec)) {
+ if (request_irq(codec->pci->irq, snd_ali_card_interrupt,
+ IRQF_SHARED, "ALI 5451", codec)) {
snd_printk(KERN_ERR "Unable to request irq.\n");
return -EBUSY;
}
diff --git a/sound/pci/als300.c b/sound/pci/als300.c
index 95f70f3..9f406fb 100644
--- a/sound/pci/als300.c
+++ b/sound/pci/als300.c
@@ -190,7 +190,7 @@
snd_als300_dbgcallenter();
snd_als300_set_irq_flag(chip, IRQ_DISABLE);
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, chip);
pci_release_regions(chip->pci);
pci_disable_device(chip->pci);
kfree(chip);
@@ -722,8 +722,8 @@
else
irq_handler = snd_als300_interrupt;
- if (request_irq(pci->irq, irq_handler, IRQF_DISABLED|IRQF_SHARED,
- card->shortname, (void *)chip)) {
+ if (request_irq(pci->irq, irq_handler, IRQF_SHARED,
+ card->shortname, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_als300_free(chip);
return -EBUSY;
diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c
index e3e99f3..476c343 100644
--- a/sound/pci/atiixp.c
+++ b/sound/pci/atiixp.c
@@ -1583,7 +1583,7 @@
return -EIO;
}
- if (request_irq(pci->irq, snd_atiixp_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_atiixp_interrupt, IRQF_SHARED,
card->shortname, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_atiixp_free(chip);
diff --git a/sound/pci/atiixp_modem.c b/sound/pci/atiixp_modem.c
index dc54f2c..cc2e6b9 100644
--- a/sound/pci/atiixp_modem.c
+++ b/sound/pci/atiixp_modem.c
@@ -1256,7 +1256,7 @@
return -EIO;
}
- if (request_irq(pci->irq, snd_atiixp_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_atiixp_interrupt, IRQF_SHARED,
card->shortname, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_atiixp_free(chip);
diff --git a/sound/pci/au88x0/au88x0.c b/sound/pci/au88x0/au88x0.c
index 6ed5ad5..238154b 100644
--- a/sound/pci/au88x0/au88x0.c
+++ b/sound/pci/au88x0/au88x0.c
@@ -198,7 +198,7 @@
}
if ((err = request_irq(pci->irq, vortex_interrupt,
- IRQF_DISABLED | IRQF_SHARED, CARD_NAME_SHORT,
+ IRQF_SHARED, CARD_NAME_SHORT,
chip)) != 0) {
printk(KERN_ERR "cannot grab irq\n");
goto irq_out;
diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c
index 2414ee6..43edd28 100644
--- a/sound/pci/azt3328.c
+++ b/sound/pci/azt3328.c
@@ -1513,7 +1513,7 @@
__end_hw:
snd_azf3328_free_joystick(chip);
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, chip);
pci_release_regions(chip->pci);
pci_disable_device(chip->pci);
@@ -1724,7 +1724,8 @@
chip->synth_port = pci_resource_start(pci, 3);
chip->mixer_port = pci_resource_start(pci, 4);
- if (request_irq(pci->irq, snd_azf3328_interrupt, IRQF_DISABLED|IRQF_SHARED, card->shortname, (void *)chip)) {
+ if (request_irq(pci->irq, snd_azf3328_interrupt,
+ IRQF_SHARED, card->shortname, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
err = -EBUSY;
goto out_err;
diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c
index d33a370..c3f3da2 100644
--- a/sound/pci/bt87x.c
+++ b/sound/pci/bt87x.c
@@ -699,7 +699,7 @@
SNDRV_DMA_TYPE_DEV_SG,
snd_dma_pci_data(chip->pci),
128 * 1024,
- (255 * 4092 + 1023) & ~1023);
+ ALIGN(255 * 4092, 1024));
}
static int __devinit snd_bt87x_create(struct snd_card *card,
@@ -747,7 +747,7 @@
snd_bt87x_writel(chip, REG_INT_MASK, 0);
snd_bt87x_writel(chip, REG_INT_STAT, MY_INTERRUPTS);
- if (request_irq(pci->irq, snd_bt87x_interrupt, IRQF_DISABLED | IRQF_SHARED,
+ if (request_irq(pci->irq, snd_bt87x_interrupt, IRQF_SHARED,
"Bt87x audio", chip)) {
snd_bt87x_free(chip);
snd_printk(KERN_ERR "cannot grab irq\n");
diff --git a/sound/pci/ca0106/ca0106.h b/sound/pci/ca0106/ca0106.h
index 9cb66c5..aaac6e5 100644
--- a/sound/pci/ca0106/ca0106.h
+++ b/sound/pci/ca0106/ca0106.h
@@ -590,7 +590,7 @@
struct resource *res_port;
int irq;
- unsigned int revision; /* chip revision */
+ unsigned char revision; /* chip revision */
unsigned int serial; /* serial number */
unsigned short model; /* subsystem id */
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index 6fa4a30..f61f052 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -154,6 +154,7 @@
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+static uint subsystem[SNDRV_CARDS]; /* Force card subsystem model */
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for the CA0106 soundcard.");
@@ -161,6 +162,8 @@
MODULE_PARM_DESC(id, "ID string for the CA0106 soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable the CA0106 soundcard.");
+module_param_array(subsystem, uint, NULL, 0444);
+MODULE_PARM_DESC(subsystem, "Force card subsystem model.");
#include "ca0106.h"
@@ -194,6 +197,17 @@
.gpio_type = 1,
.i2c_adc = 1,
.spi_dac = 1 } ,
+ /* New Audigy LS. Has a different DAC. */
+ /* SB0570:
+ * CTRL:CA0106-DAT
+ * ADC: WM8775EDS
+ * DAC: WM8768GEDS
+ */
+ { .serial = 0x10111102,
+ .name = "Audigy SE OEM [SB0570a]",
+ .gpio_type = 1,
+ .i2c_adc = 1,
+ .spi_dac = 1 } ,
/* MSI K8N Diamond Motherboard with onboard SB Live 24bit without AC97 */
/* SB0438
* CTRL:CA0106-DAT
@@ -1046,7 +1060,7 @@
// release the irq
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, chip);
pci_disable_device(chip->pci);
kfree(chip);
return 0;
@@ -1223,7 +1237,7 @@
{ 0x15, ADC_MUX_LINEIN }, /* ADC Mixer control */
};
-static int __devinit snd_ca0106_create(struct snd_card *card,
+static int __devinit snd_ca0106_create(int dev, struct snd_card *card,
struct pci_dev *pci,
struct snd_ca0106 **rchip)
{
@@ -1267,8 +1281,7 @@
}
if (request_irq(pci->irq, snd_ca0106_interrupt,
- IRQF_DISABLED|IRQF_SHARED, "snd_ca0106",
- (void *)chip)) {
+ IRQF_SHARED, "snd_ca0106", chip)) {
snd_ca0106_free(chip);
printk(KERN_ERR "cannot grab irq\n");
return -EBUSY;
@@ -1283,21 +1296,29 @@
pci_set_master(pci);
/* read revision & serial */
- pci_read_config_byte(pci, PCI_REVISION_ID, (char *)&chip->revision);
+ pci_read_config_byte(pci, PCI_REVISION_ID, &chip->revision);
pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &chip->serial);
pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &chip->model);
#if 1
- printk(KERN_INFO "Model %04x Rev %08x Serial %08x\n", chip->model,
+ printk(KERN_INFO "snd-ca0106: Model %04x Rev %08x Serial %08x\n", chip->model,
chip->revision, chip->serial);
#endif
strcpy(card->driver, "CA0106");
strcpy(card->shortname, "CA0106");
for (c = ca0106_chip_details; c->serial; c++) {
- if (c->serial == chip->serial)
+ if (subsystem[dev]) {
+ if (c->serial == subsystem[dev])
+ break;
+ } else if (c->serial == chip->serial)
break;
}
chip->details = c;
+ if (subsystem[dev]) {
+ printk(KERN_INFO "snd-ca0106: Sound card name=%s, subsystem=0x%x. Forced to subsystem=0x%x\n",
+ c->name, chip->serial, subsystem[dev]);
+ }
+
sprintf(card->longname, "%s at 0x%lx irq %i",
c->name, chip->port, chip->irq);
@@ -1540,7 +1561,7 @@
if (card == NULL)
return -ENOMEM;
- if ((err = snd_ca0106_create(card, pci, &chip)) < 0) {
+ if ((err = snd_ca0106_create(dev, card, pci, &chip)) < 0) {
snd_card_free(card);
return err;
}
diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c
index 0093cd1..71c58df 100644
--- a/sound/pci/cmipci.c
+++ b/sound/pci/cmipci.c
@@ -2862,7 +2862,7 @@
cm->iobase = pci_resource_start(pci, 0);
if (request_irq(pci->irq, snd_cmipci_interrupt,
- IRQF_DISABLED|IRQF_SHARED, card->driver, cm)) {
+ IRQF_SHARED, card->driver, cm)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_cmipci_free(cm);
return -EBUSY;
diff --git a/sound/pci/cs4281.c b/sound/pci/cs4281.c
index 0905fa8..8e5519d 100644
--- a/sound/pci/cs4281.c
+++ b/sound/pci/cs4281.c
@@ -1391,7 +1391,7 @@
return -ENOMEM;
}
- if (request_irq(pci->irq, snd_cs4281_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_cs4281_interrupt, IRQF_SHARED,
"CS4281", chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_cs4281_free(chip);
diff --git a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c
index 2807b97..2ae539b 100644
--- a/sound/pci/cs46xx/cs46xx_lib.c
+++ b/sound/pci/cs46xx/cs46xx_lib.c
@@ -3867,7 +3867,7 @@
}
}
- if (request_irq(pci->irq, snd_cs46xx_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_cs46xx_interrupt, IRQF_SHARED,
"CS46XX", chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_cs46xx_free(chip);
diff --git a/sound/pci/cs5535audio/cs5535audio.c b/sound/pci/cs5535audio/cs5535audio.c
index 2441238..b8e75ef 100644
--- a/sound/pci/cs5535audio/cs5535audio.c
+++ b/sound/pci/cs5535audio/cs5535audio.c
@@ -320,7 +320,7 @@
cs5535au->port = pci_resource_start(pci, 0);
if (request_irq(pci->irq, snd_cs5535audio_interrupt,
- IRQF_DISABLED|IRQF_SHARED, "CS5535 Audio", cs5535au)) {
+ IRQF_SHARED, "CS5535 Audio", cs5535au)) {
snd_printk("unable to grab IRQ %d\n", pci->irq);
err = -EBUSY;
goto sndfail;
diff --git a/sound/pci/echoaudio/echoaudio.c b/sound/pci/echoaudio/echoaudio.c
index e5e88fe..047e0b5 100644
--- a/sound/pci/echoaudio/echoaudio.c
+++ b/sound/pci/echoaudio/echoaudio.c
@@ -1872,7 +1872,7 @@
DE_INIT(("Stopped.\n"));
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, chip);
if (chip->dsp_registers)
iounmap(chip->dsp_registers);
@@ -1950,8 +1950,8 @@
chip->dsp_registers = (volatile u32 __iomem *)
ioremap_nocache(chip->dsp_registers_phys, sz);
- if (request_irq(pci->irq, snd_echo_interrupt, IRQF_DISABLED | IRQF_SHARED,
- ECHOCARD_NAME, (void *)chip)) {
+ if (request_irq(pci->irq, snd_echo_interrupt, IRQF_SHARED,
+ ECHOCARD_NAME, chip)) {
snd_echo_free(chip);
snd_printk(KERN_ERR "cannot grab irq\n");
return -EBUSY;
diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c
index 8bc4ffa..972ec40 100644
--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -759,7 +759,7 @@
free_pm_buffer(emu);
#endif
if (emu->irq >= 0)
- free_irq(emu->irq, (void *)emu);
+ free_irq(emu->irq, emu);
if (emu->port)
pci_release_regions(emu->pci);
if (emu->card_capabilities->ca0151_chip) /* P16V */
@@ -1246,7 +1246,8 @@
}
emu->port = pci_resource_start(pci, 0);
- if (request_irq(pci->irq, snd_emu10k1_interrupt, IRQF_DISABLED|IRQF_SHARED, "EMU10K1", (void *)emu)) {
+ if (request_irq(pci->irq, snd_emu10k1_interrupt, IRQF_SHARED,
+ "EMU10K1", emu)) {
err = -EBUSY;
goto error;
}
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index c46905a..2199b42 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -235,7 +235,7 @@
struct resource *res_port;
int irq;
- unsigned int revision; /* chip revision */
+ unsigned char revision; /* chip revision */
unsigned int serial; /* serial number */
unsigned short model; /* subsystem id */
@@ -760,7 +760,7 @@
// release the irq
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, chip);
// release the DMA
if (chip->dma_buffer.area) {
@@ -927,8 +927,7 @@
}
if (request_irq(pci->irq, snd_emu10k1x_interrupt,
- IRQF_DISABLED|IRQF_SHARED, "EMU10K1X",
- (void *)chip)) {
+ IRQF_SHARED, "EMU10K1X", chip)) {
snd_printk(KERN_ERR "emu10k1x: cannot grab irq %d\n", pci->irq);
snd_emu10k1x_free(chip);
return -EBUSY;
@@ -943,7 +942,7 @@
pci_set_master(pci);
/* read revision & serial */
- pci_read_config_byte(pci, PCI_REVISION_ID, (char *)&chip->revision);
+ pci_read_config_byte(pci, PCI_REVISION_ID, &chip->revision);
pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &chip->serial);
pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &chip->model);
snd_printk(KERN_INFO "Model %04x Rev %08x Serial %08x\n", chip->model,
diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index d2a811f..a84f6b2 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -2141,7 +2141,7 @@
return err;
}
ensoniq->port = pci_resource_start(pci, 0);
- if (request_irq(pci->irq, snd_audiopci_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_audiopci_interrupt, IRQF_SHARED,
"Ensoniq AudioPCI", ensoniq)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_ensoniq_free(ensoniq);
diff --git a/sound/pci/es1938.c b/sound/pci/es1938.c
index 1a8d36df..66ac26c 100644
--- a/sound/pci/es1938.c
+++ b/sound/pci/es1938.c
@@ -1508,7 +1508,7 @@
}
if (request_irq(pci->irq, snd_es1938_interrupt,
- IRQF_DISABLED|IRQF_SHARED, "ES1938", chip)) {
+ IRQF_SHARED, "ES1938", chip)) {
printk(KERN_ERR "es1938: unable to grab IRQ %d, "
"disabling device\n", pci->irq);
snd_card_disconnect(card);
@@ -1631,7 +1631,7 @@
chip->vc_port = pci_resource_start(pci, 2);
chip->mpu_port = pci_resource_start(pci, 3);
chip->game_port = pci_resource_start(pci, 4);
- if (request_irq(pci->irq, snd_es1938_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_es1938_interrupt, IRQF_SHARED,
"ES1938", chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_es1938_free(chip);
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index 092da53e..dc84c18 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -1337,7 +1337,7 @@
struct esm_memory *buf;
struct list_head *p;
- size = ((size + ESM_MEM_ALIGN - 1) / ESM_MEM_ALIGN) * ESM_MEM_ALIGN;
+ size = ALIGN(size, ESM_MEM_ALIGN);
mutex_lock(&chip->memory_mutex);
list_for_each(p, &chip->buf_list) {
buf = list_entry(p, struct esm_memory, list);
@@ -2462,7 +2462,7 @@
}
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, chip);
snd_es1968_free_gameport(chip);
chip->master_switch = NULL;
chip->master_volume = NULL;
@@ -2552,8 +2552,8 @@
return err;
}
chip->io_port = pci_resource_start(pci, 0);
- if (request_irq(pci->irq, snd_es1968_interrupt, IRQF_DISABLED|IRQF_SHARED,
- "ESS Maestro", (void*)chip)) {
+ if (request_irq(pci->irq, snd_es1968_interrupt, IRQF_SHARED,
+ "ESS Maestro", chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_es1968_free(chip);
return -EBUSY;
diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c
index 77e3d5c..b7b361c 100644
--- a/sound/pci/fm801.c
+++ b/sound/pci/fm801.c
@@ -1395,7 +1395,7 @@
}
chip->port = pci_resource_start(pci, 0);
if ((tea575x_tuner & 0x0010) == 0) {
- if (request_irq(pci->irq, snd_fm801_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_fm801_interrupt, IRQF_SHARED,
"FM801", chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", chip->irq);
snd_fm801_free(chip);
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 71482c1..18bbc87 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -1367,9 +1367,6 @@
{ 176400, SNDRV_PCM_RATE_176400, 0x5800 },/* 4 x 44 */
{ 192000, SNDRV_PCM_RATE_192000, 0x1800 }, /* 4 x 48 */
- /* not autodetected value */
- { 9600, SNDRV_PCM_RATE_KNOT, 0x0400 }, /* 1/5 x 48 */
-
{ 0 } /* terminator */
};
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index e35cfd3..9fd34f8 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1380,7 +1380,8 @@
static int azx_acquire_irq(struct azx *chip, int do_disconnect)
{
- if (request_irq(chip->pci->irq, azx_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(chip->pci->irq, azx_interrupt,
+ chip->msi ? 0 : IRQF_SHARED,
"HDA Intel", chip)) {
printk(KERN_ERR "hda-intel: unable to grab IRQ %d, "
"disabling device\n", chip->pci->irq);
diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c
index d737f17..17df4d0 100644
--- a/sound/pci/hda/hda_proc.c
+++ b/sound/pci/hda/hda_proc.c
@@ -45,7 +45,7 @@
if (names[wid_value])
return names[wid_value];
else
- return "UNKOWN Widget";
+ return "UNKNOWN Widget";
}
static void print_amp_caps(struct snd_info_buffer *buffer,
@@ -88,6 +88,48 @@
snd_iprintf(buffer, "\n");
}
+static void print_pcm_rates(struct snd_info_buffer *buffer, unsigned int pcm)
+{
+ static unsigned int rates[] = {
+ 8000, 11025, 16000, 22050, 32000, 44100, 48000, 88200,
+ 96000, 176400, 192000, 384000
+ };
+ int i;
+
+ pcm &= AC_SUPPCM_RATES;
+ snd_iprintf(buffer, " rates [0x%x]:", pcm);
+ for (i = 0; i < ARRAY_SIZE(rates); i++)
+ if (pcm & (1 << i))
+ snd_iprintf(buffer, " %d", rates[i]);
+ snd_iprintf(buffer, "\n");
+}
+
+static void print_pcm_bits(struct snd_info_buffer *buffer, unsigned int pcm)
+{
+ static unsigned int bits[] = { 8, 16, 20, 24, 32 };
+ int i;
+
+ pcm = (pcm >> 16) & 0xff;
+ snd_iprintf(buffer, " bits [0x%x]:", pcm);
+ for (i = 0; i < ARRAY_SIZE(bits); i++)
+ if (pcm & (1 << i))
+ snd_iprintf(buffer, " %d", bits[i]);
+ snd_iprintf(buffer, "\n");
+}
+
+static void print_pcm_formats(struct snd_info_buffer *buffer,
+ unsigned int streams)
+{
+ snd_iprintf(buffer, " formats [0x%x]:", streams & 0xf);
+ if (streams & AC_SUPFMT_PCM)
+ snd_iprintf(buffer, " PCM");
+ if (streams & AC_SUPFMT_FLOAT32)
+ snd_iprintf(buffer, " FLOAT");
+ if (streams & AC_SUPFMT_AC3)
+ snd_iprintf(buffer, " AC3");
+ snd_iprintf(buffer, "\n");
+}
+
static void print_pcm_caps(struct snd_info_buffer *buffer,
struct hda_codec *codec, hda_nid_t nid)
{
@@ -97,8 +139,9 @@
snd_iprintf(buffer, "N/A\n");
return;
}
- snd_iprintf(buffer, "rates 0x%03x, bits 0x%02x, types 0x%x\n",
- pcm & AC_SUPPCM_RATES, (pcm >> 16) & 0xff, stream & 0xf);
+ print_pcm_rates(buffer, pcm);
+ print_pcm_bits(buffer, pcm);
+ print_pcm_formats(buffer, stream);
}
static const char *get_jack_location(u32 cfg)
@@ -210,7 +253,7 @@
snd_iprintf(buffer, "Revision Id: 0x%x\n", codec->revision_id);
if (! codec->afg)
return;
- snd_iprintf(buffer, "Default PCM: ");
+ snd_iprintf(buffer, "Default PCM:\n");
print_pcm_caps(buffer, codec, codec->afg);
snd_iprintf(buffer, "Default Amp-In caps: ");
print_amp_caps(buffer, codec, codec->afg, HDA_INPUT);
@@ -278,7 +321,7 @@
if ((wid_type == AC_WID_AUD_OUT || wid_type == AC_WID_AUD_IN) &&
(wid_caps & AC_WCAP_FORMAT_OVRD)) {
- snd_iprintf(buffer, " PCM: ");
+ snd_iprintf(buffer, " PCM:\n");
print_pcm_caps(buffer, codec, nid);
}
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index edd22de..076365b 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -794,6 +794,8 @@
{ .modelname = "3stack", .config = AD1986A_3STACK },
{ .pci_subvendor = 0x10de, .pci_subdevice = 0xcb84,
.config = AD1986A_3STACK }, /* ASUS A8N-VM CSM */
+ { .pci_subvendor = 0x1043, .pci_subdevice = 0x817f,
+ .config = AD1986A_3STACK }, /* ASUS P5P-L2 */
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x81b3,
.config = AD1986A_3STACK }, /* ASUS P5RD2-VM / P5GPL-X SE */
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x81cb,
@@ -811,7 +813,7 @@
{ .pci_subvendor = 0x144d, .pci_subdevice = 0xc024,
.config = AD1986A_LAPTOP_EAPD }, /* Samsung R65-T2300 Charis */
{ .pci_subvendor = 0x144d, .pci_subdevice = 0xc026,
- .config = AD1986A_LAPTOP_EAPD }, /* Samsung X10-T2300 Culesa */
+ .config = AD1986A_LAPTOP_EAPD }, /* Samsung X11-T2300 Culesa */
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1153,
.config = AD1986A_LAPTOP_EAPD }, /* ASUS M9 */
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1213,
@@ -822,6 +824,8 @@
.config = AD1986A_LAPTOP_EAPD }, /* ASUS U5F */
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1297,
.config = AD1986A_LAPTOP_EAPD }, /* ASUS Z62F */
+ { .pci_subvendor = 0x1043, .pci_subdevice = 0x12b3,
+ .config = AD1986A_LAPTOP_EAPD }, /* ASUS V1j */
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x30af,
.config = AD1986A_LAPTOP_EAPD }, /* HP Compaq Presario B2800 */
{ .pci_subvendor = 0x17aa, .pci_subdevice = 0x2066,
@@ -1640,7 +1644,7 @@
int err = snd_hda_ch_mode_put(codec, ucontrol, spec->channel_mode,
spec->num_channel_mode,
&spec->multiout.max_channels);
- if (! err && spec->need_dac_fix)
+ if (err >= 0 && spec->need_dac_fix)
spec->multiout.num_dacs = spec->multiout.max_channels / 2;
return err;
}
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index fb96144..29e4c48 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -271,7 +271,7 @@
int err = snd_hda_ch_mode_put(codec, ucontrol, spec->channel_mode,
spec->num_channel_mode,
&spec->multiout.max_channels);
- if (! err && spec->need_dac_fix)
+ if (err >= 0 && spec->need_dac_fix)
spec->multiout.num_dacs = spec->multiout.max_channels / 2;
return err;
}
@@ -5872,6 +5872,8 @@
{ .modelname = "hp-bpc", .config = ALC262_HP_BPC },
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x280c,
.config = ALC262_HP_BPC }, /* xw4400 */
+ { .pci_subvendor = 0x103c, .pci_subdevice = 0x2801,
+ .config = ALC262_HP_BPC }, /* q965 */
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x3014,
.config = ALC262_HP_BPC }, /* xw6400 */
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x3015,
diff --git a/sound/pci/hda/patch_si3054.c b/sound/pci/hda/patch_si3054.c
index cc87dff..ed5e45e 100644
--- a/sound/pci/hda/patch_si3054.c
+++ b/sound/pci/hda/patch_si3054.c
@@ -243,7 +243,8 @@
if((val&SI3054_MEI_READY) != SI3054_MEI_READY) {
snd_printk(KERN_ERR "si3054: cannot initialize. EXT MID = %04x\n", val);
- return -EACCES;
+ /* let's pray that this is no fatal error */
+ /* return -EACCES; */
}
SET_REG(codec, SI3054_GPIO_POLARITY, 0xffff);
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index 8a576b7..8ba31cf 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -2614,7 +2614,7 @@
ice->dmapath_port = pci_resource_start(pci, 2);
ice->profi_port = pci_resource_start(pci, 3);
- if (request_irq(pci->irq, snd_ice1712_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_ice1712_interrupt, IRQF_SHARED,
"ICE1712", ice)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_ice1712_free(ice);
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index e9cbfdf..3e3a102 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -2253,7 +2253,7 @@
ice->profi_port = pci_resource_start(pci, 1);
if (request_irq(pci->irq, snd_vt1724_interrupt,
- IRQF_DISABLED|IRQF_SHARED, "ICE1724", ice)) {
+ IRQF_SHARED, "ICE1724", ice)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_vt1724_free(ice);
return -EIO;
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 9c1bce7..30aaa60 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -2509,7 +2509,7 @@
}
pci_set_master(pci);
if (request_irq(pci->irq, snd_intel8x0_interrupt,
- IRQF_DISABLED|IRQF_SHARED, card->shortname, chip)) {
+ IRQF_SHARED, card->shortname, chip)) {
printk(KERN_ERR "intel8x0: unable to grab IRQ %d, "
"disabling device\n", pci->irq);
snd_card_disconnect(card);
@@ -2887,7 +2887,7 @@
/* request irq after initializaing int_sta_mask, etc */
if (request_irq(pci->irq, snd_intel8x0_interrupt,
- IRQF_DISABLED|IRQF_SHARED, card->shortname, chip)) {
+ IRQF_SHARED, card->shortname, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_intel8x0_free(chip);
return -EBUSY;
diff --git a/sound/pci/intel8x0m.c b/sound/pci/intel8x0m.c
index bd467c5..09dcf92 100644
--- a/sound/pci/intel8x0m.c
+++ b/sound/pci/intel8x0m.c
@@ -1071,7 +1071,7 @@
}
pci_set_master(pci);
if (request_irq(pci->irq, snd_intel8x0_interrupt,
- IRQF_DISABLED|IRQF_SHARED, card->shortname, chip)) {
+ IRQF_SHARED, card->shortname, chip)) {
printk(KERN_ERR "intel8x0m: unable to grab IRQ %d, "
"disabling device\n", pci->irq);
snd_card_disconnect(card);
@@ -1205,7 +1205,7 @@
}
port_inited:
- if (request_irq(pci->irq, snd_intel8x0_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_intel8x0_interrupt, IRQF_SHARED,
card->shortname, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_intel8x0_free(chip);
diff --git a/sound/pci/korg1212/korg1212.c b/sound/pci/korg1212/korg1212.c
index fa8cd8c..345eefe 100644
--- a/sound/pci/korg1212/korg1212.c
+++ b/sound/pci/korg1212/korg1212.c
@@ -2233,7 +2233,7 @@
}
err = request_irq(pci->irq, snd_korg1212_interrupt,
- IRQF_DISABLED|IRQF_SHARED,
+ IRQF_SHARED,
"korg1212", korg1212);
if (err) {
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
index 8cab342..6efe6d5 100644
--- a/sound/pci/maestro3.c
+++ b/sound/pci/maestro3.c
@@ -2377,7 +2377,7 @@
* shifted list address is aligned.
* list address = (mem address >> 1) >> 7;
*/
- data_bytes = (data_bytes + 255) & ~255;
+ data_bytes = ALIGN(data_bytes, 256);
address = 0x1100 + ((data_bytes/2) * index);
if ((address + (data_bytes/2)) >= 0x1c00) {
@@ -2762,7 +2762,7 @@
tasklet_init(&chip->hwvol_tq, snd_m3_update_hw_volume, (unsigned long)chip);
- if (request_irq(pci->irq, snd_m3_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_m3_interrupt, IRQF_SHARED,
card->driver, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_m3_free(chip);
diff --git a/sound/pci/mixart/mixart.c b/sound/pci/mixart/mixart.c
index 216aee5..21386da 100644
--- a/sound/pci/mixart/mixart.c
+++ b/sound/pci/mixart/mixart.c
@@ -1066,7 +1066,7 @@
/* release irq */
if (mgr->irq >= 0)
- free_irq(mgr->irq, (void *)mgr);
+ free_irq(mgr->irq, mgr);
/* reset board if some firmware was loaded */
if(mgr->dsp_loaded) {
@@ -1319,7 +1319,8 @@
pci_resource_len(pci, i));
}
- if (request_irq(pci->irq, snd_mixart_interrupt, IRQF_DISABLED|IRQF_SHARED, CARD_NAME, (void *)mgr)) {
+ if (request_irq(pci->irq, snd_mixart_interrupt, IRQF_SHARED,
+ CARD_NAME, mgr)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_mixart_free(mgr);
return -EBUSY;
diff --git a/sound/pci/nm256/nm256.c b/sound/pci/nm256/nm256.c
index 945d21b..879e31a 100644
--- a/sound/pci/nm256/nm256.c
+++ b/sound/pci/nm256/nm256.c
@@ -465,7 +465,7 @@
{
mutex_lock(&chip->irq_mutex);
if (chip->irq < 0) {
- if (request_irq(chip->pci->irq, chip->interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(chip->pci->irq, chip->interrupt, IRQF_SHARED,
chip->card->driver, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", chip->pci->irq);
mutex_unlock(&chip->irq_mutex);
diff --git a/sound/pci/pcxhr/pcxhr.c b/sound/pci/pcxhr/pcxhr.c
index 533c672..d974134 100644
--- a/sound/pci/pcxhr/pcxhr.c
+++ b/sound/pci/pcxhr/pcxhr.c
@@ -1250,7 +1250,7 @@
mgr->pci = pci;
mgr->irq = -1;
- if (request_irq(pci->irq, pcxhr_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, pcxhr_interrupt, IRQF_SHARED,
card_name, mgr)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
pcxhr_free(mgr);
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index 56e0c01..5e1d5d2 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -1899,9 +1899,8 @@
hwport = (struct riptideport *)chip->port;
UNSET_AIE(hwport);
- if (request_irq
- (pci->irq, snd_riptide_interrupt, IRQF_DISABLED | IRQF_SHARED,
- "RIPTIDE", chip)) {
+ if (request_irq(pci->irq, snd_riptide_interrupt, IRQF_SHARED,
+ "RIPTIDE", chip)) {
snd_printk(KERN_ERR "Riptide: unable to grab IRQ %d\n",
pci->irq);
snd_riptide_free(chip);
diff --git a/sound/pci/rme32.c b/sound/pci/rme32.c
index dc8d130..6bb7ac6 100644
--- a/sound/pci/rme32.c
+++ b/sound/pci/rme32.c
@@ -1373,7 +1373,8 @@
return -ENOMEM;
}
- if (request_irq(pci->irq, snd_rme32_interrupt, IRQF_DISABLED | IRQF_SHARED, "RME32", (void *) rme32)) {
+ if (request_irq(pci->irq, snd_rme32_interrupt, IRQF_SHARED,
+ "RME32", rme32)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
return -EBUSY;
}
diff --git a/sound/pci/rme96.c b/sound/pci/rme96.c
index 106110a..e3304b7ccb 100644
--- a/sound/pci/rme96.c
+++ b/sound/pci/rme96.c
@@ -1587,7 +1587,8 @@
return -ENOMEM;
}
- if (request_irq(pci->irq, snd_rme96_interrupt, IRQF_DISABLED|IRQF_SHARED, "RME96", (void *)rme96)) {
+ if (request_irq(pci->irq, snd_rme96_interrupt, IRQF_SHARED,
+ "RME96", rme96)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
return -EBUSY;
}
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index 694aa05..6383987 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -3516,8 +3516,8 @@
/* Align to bus-space 64K boundary */
- cb_bus = (hdsp->capture_dma_buf.addr + 0xFFFF) & ~0xFFFFl;
- pb_bus = (hdsp->playback_dma_buf.addr + 0xFFFF) & ~0xFFFFl;
+ cb_bus = ALIGN(hdsp->capture_dma_buf.addr, 0x10000ul);
+ pb_bus = ALIGN(hdsp->playback_dma_buf.addr, 0x10000ul);
/* Tell the card where it is */
@@ -4934,13 +4934,14 @@
return -EBUSY;
}
- if (request_irq(pci->irq, snd_hdsp_interrupt, IRQF_DISABLED|IRQF_SHARED, "hdsp", (void *)hdsp)) {
+ if (request_irq(pci->irq, snd_hdsp_interrupt, IRQF_SHARED,
+ "hdsp", hdsp)) {
snd_printk(KERN_ERR "Hammerfall-DSP: unable to use IRQ %d\n", pci->irq);
return -EBUSY;
}
hdsp->irq = pci->irq;
- hdsp->precise_ptr = 1;
+ hdsp->precise_ptr = 0;
hdsp->use_midi_tasklet = 1;
if ((err = snd_hdsp_initialize_memory(hdsp)) < 0)
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 7055d89..0547f6f 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -3496,8 +3496,7 @@
hdspm->port + io_extent - 1);
if (request_irq(pci->irq, snd_hdspm_interrupt,
- IRQF_DISABLED | IRQF_SHARED, "hdspm",
- (void *) hdspm)) {
+ IRQF_SHARED, "hdspm", hdspm)) {
snd_printk(KERN_ERR "HDSPM: unable to use IRQ %d\n", pci->irq);
return -EBUSY;
}
diff --git a/sound/pci/rme9652/rme9652.c b/sound/pci/rme9652/rme9652.c
index cf0427b..cc3bdec 100644
--- a/sound/pci/rme9652/rme9652.c
+++ b/sound/pci/rme9652/rme9652.c
@@ -1827,8 +1827,8 @@
/* Align to bus-space 64K boundary */
- cb_bus = (rme9652->capture_dma_buf.addr + 0xFFFF) & ~0xFFFFl;
- pb_bus = (rme9652->playback_dma_buf.addr + 0xFFFF) & ~0xFFFFl;
+ cb_bus = ALIGN(rme9652->capture_dma_buf.addr, 0x10000ul);
+ pb_bus = ALIGN(rme9652->playback_dma_buf.addr, 0x10000ul);
/* Tell the card where it is */
@@ -2500,7 +2500,8 @@
return -EBUSY;
}
- if (request_irq(pci->irq, snd_rme9652_interrupt, IRQF_DISABLED|IRQF_SHARED, "rme9652", (void *)rme9652)) {
+ if (request_irq(pci->irq, snd_rme9652_interrupt, IRQF_SHARED,
+ "rme9652", rme9652)) {
snd_printk(KERN_ERR "unable to request IRQ %d\n", pci->irq);
return -EBUSY;
}
diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c
index f9b8afa..9f25d93 100644
--- a/sound/pci/sonicvibes.c
+++ b/sound/pci/sonicvibes.c
@@ -1195,7 +1195,7 @@
pci_write_config_dword(sonic->pci, 0x40, sonic->dmaa_port);
pci_write_config_dword(sonic->pci, 0x48, sonic->dmac_port);
if (sonic->irq >= 0)
- free_irq(sonic->irq, (void *)sonic);
+ free_irq(sonic->irq, sonic);
release_and_free_resource(sonic->res_dmaa);
release_and_free_resource(sonic->res_dmac);
pci_release_regions(sonic->pci);
@@ -1257,7 +1257,8 @@
sonic->midi_port = pci_resource_start(pci, 3);
sonic->game_port = pci_resource_start(pci, 4);
- if (request_irq(pci->irq, snd_sonicvibes_interrupt, IRQF_DISABLED|IRQF_SHARED, "S3 SonicVibes", (void *)sonic)) {
+ if (request_irq(pci->irq, snd_sonicvibes_interrupt, IRQF_SHARED,
+ "S3 SonicVibes", sonic)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_sonicvibes_free(sonic);
return -EBUSY;
diff --git a/sound/pci/trident/trident_main.c b/sound/pci/trident/trident_main.c
index 1fbc432..474f2d4 100644
--- a/sound/pci/trident/trident_main.c
+++ b/sound/pci/trident/trident_main.c
@@ -3380,8 +3380,8 @@
snd_printk(KERN_ERR "trident: unable to allocate TLB buffer\n");
return -ENOMEM;
}
- trident->tlb.entries = (unsigned int*)(((unsigned long)trident->tlb.buffer.area + SNDRV_TRIDENT_MAX_PAGES * 4 - 1) & ~(SNDRV_TRIDENT_MAX_PAGES * 4 - 1));
- trident->tlb.entries_dmaaddr = (trident->tlb.buffer.addr + SNDRV_TRIDENT_MAX_PAGES * 4 - 1) & ~(SNDRV_TRIDENT_MAX_PAGES * 4 - 1);
+ trident->tlb.entries = (unsigned int*)ALIGN((unsigned long)trident->tlb.buffer.area, SNDRV_TRIDENT_MAX_PAGES * 4);
+ trident->tlb.entries_dmaaddr = ALIGN(trident->tlb.buffer.addr, SNDRV_TRIDENT_MAX_PAGES * 4);
/* allocate shadow TLB page table (virtual addresses) */
trident->tlb.shadow_entries = vmalloc(SNDRV_TRIDENT_MAX_PAGES*sizeof(unsigned long));
if (trident->tlb.shadow_entries == NULL) {
@@ -3608,7 +3608,7 @@
}
trident->port = pci_resource_start(pci, 0);
- if (request_irq(pci->irq, snd_trident_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_trident_interrupt, IRQF_SHARED,
"Trident Audio", trident)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_trident_free(trident);
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index 92b0736..a572b01 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -2307,7 +2307,7 @@
if (request_irq(pci->irq,
chip_type == TYPE_VIA8233 ?
snd_via8233_interrupt : snd_via686_interrupt,
- IRQF_DISABLED|IRQF_SHARED,
+ IRQF_SHARED,
card->driver, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_via82xx_free(chip);
@@ -2366,7 +2366,7 @@
static int __devinit check_dxs_list(struct pci_dev *pci, int revision)
{
- static struct dxs_whitelist whitelist[] = {
+ static struct dxs_whitelist whitelist[] __devinitdata = {
{ .subvendor = 0x1005, .subdevice = 0x4710, .action = VIA_DXS_ENABLE }, /* Avance Logic Mobo */
{ .subvendor = 0x1019, .subdevice = 0x0996, .action = VIA_DXS_48K },
{ .subvendor = 0x1019, .subdevice = 0x0a81, .action = VIA_DXS_NO_VRA }, /* ECS K7VTA3 v8.0 */
@@ -2427,7 +2427,7 @@
{ .subvendor = 0x4005, .subdevice = 0x4710, .action = VIA_DXS_SRC }, /* MSI K7T266 Pro2 (MS-6380 V2.0) BIOS 3.7 */
{ } /* terminator */
};
- struct dxs_whitelist *w;
+ const struct dxs_whitelist *w;
unsigned short subsystem_vendor;
unsigned short subsystem_device;
diff --git a/sound/pci/via82xx_modem.c b/sound/pci/via82xx_modem.c
index feb27c9..17d6b84 100644
--- a/sound/pci/via82xx_modem.c
+++ b/sound/pci/via82xx_modem.c
@@ -1124,7 +1124,7 @@
return err;
}
chip->port = pci_resource_start(pci, 0);
- if (request_irq(pci->irq, snd_via82xx_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, snd_via82xx_interrupt, IRQF_SHARED,
card->driver, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_via82xx_free(chip);
diff --git a/sound/pci/vx222/vx222.c b/sound/pci/vx222/vx222.c
index af49e8a..89f58ea 100644
--- a/sound/pci/vx222/vx222.c
+++ b/sound/pci/vx222/vx222.c
@@ -169,8 +169,8 @@
for (i = 0; i < 2; i++)
vx->port[i] = pci_resource_start(pci, i + 1);
- if (request_irq(pci->irq, snd_vx_irq_handler, IRQF_DISABLED|IRQF_SHARED,
- CARD_NAME, (void *) chip)) {
+ if (request_irq(pci->irq, snd_vx_irq_handler, IRQF_SHARED,
+ CARD_NAME, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_vx222_free(chip);
return -EBUSY;
diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c
index 186453f..fd9b7b8 100644
--- a/sound/pci/ymfpci/ymfpci.c
+++ b/sound/pci/ymfpci/ymfpci.c
@@ -49,7 +49,6 @@
static long joystick_port[SNDRV_CARDS];
#endif
static int rear_switch[SNDRV_CARDS];
-static int rear_swap[SNDRV_CARDS] = { [0 ... (SNDRV_CARDS-1)] = 1 };
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for the Yamaha DS-1 PCI soundcard.");
@@ -67,8 +66,6 @@
#endif
module_param_array(rear_switch, bool, NULL, 0444);
MODULE_PARM_DESC(rear_switch, "Enable shared rear/line-in switch");
-module_param_array(rear_swap, bool, NULL, 0444);
-MODULE_PARM_DESC(rear_swap, "Swap rear channels (must be enabled for correct IEC958 (S/PDIF)) output");
static struct pci_device_id snd_ymfpci_ids[] = {
{ 0x1073, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF724 */
@@ -298,7 +295,7 @@
snd_card_free(card);
return err;
}
- if ((err = snd_ymfpci_mixer(chip, rear_switch[dev], rear_swap[dev])) < 0) {
+ if ((err = snd_ymfpci_mixer(chip, rear_switch[dev])) < 0) {
snd_card_free(card);
return err;
}
diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c
index a40c108..7881944 100644
--- a/sound/pci/ymfpci/ymfpci_main.c
+++ b/sound/pci/ymfpci/ymfpci_main.c
@@ -910,7 +910,7 @@
ypcm = runtime->private_data;
ypcm->output_front = 1;
ypcm->output_rear = chip->mode_dup4ch ? 1 : 0;
- ypcm->swap_rear = chip->rear_swap;
+ ypcm->swap_rear = 0;
spin_lock_irq(&chip->reg_lock);
if (ypcm->output_rear) {
ymfpci_open_extension(chip);
@@ -936,6 +936,7 @@
ypcm = runtime->private_data;
ypcm->output_front = 0;
ypcm->output_rear = 1;
+ ypcm->swap_rear = 1;
spin_lock_irq(&chip->reg_lock);
snd_ymfpci_writew(chip, YDSXGR_SPDIFOUTCTRL,
snd_ymfpci_readw(chip, YDSXGR_SPDIFOUTCTRL) | 2);
@@ -963,6 +964,7 @@
ypcm = runtime->private_data;
ypcm->output_front = 0;
ypcm->output_rear = 1;
+ ypcm->swap_rear = 0;
spin_lock_irq(&chip->reg_lock);
ymfpci_open_extension(chip);
chip->rear_opened++;
@@ -1755,7 +1757,7 @@
chip->ac97 = NULL;
}
-int __devinit snd_ymfpci_mixer(struct snd_ymfpci *chip, int rear_switch, int rear_swap)
+int __devinit snd_ymfpci_mixer(struct snd_ymfpci *chip, int rear_switch)
{
struct snd_ac97_template ac97;
struct snd_kcontrol *kctl;
@@ -1767,7 +1769,6 @@
.read = snd_ymfpci_codec_read,
};
- chip->rear_swap = rear_swap;
if ((err = snd_ac97_bus(chip->card, 0, &ops, chip, &chip->ac97_bus)) < 0)
return err;
chip->ac97_bus->private_free = snd_ymfpci_mixer_free_ac97_bus;
@@ -2025,10 +2026,10 @@
chip->bank_size_effect = snd_ymfpci_readl(chip, YDSXGR_EFFCTRLSIZE) << 2;
chip->work_size = YDSXG_DEFAULT_WORK_SIZE;
- size = ((playback_ctrl_size + 0x00ff) & ~0x00ff) +
- ((chip->bank_size_playback * 2 * YDSXG_PLAYBACK_VOICES + 0x00ff) & ~0x00ff) +
- ((chip->bank_size_capture * 2 * YDSXG_CAPTURE_VOICES + 0x00ff) & ~0x00ff) +
- ((chip->bank_size_effect * 2 * YDSXG_EFFECT_VOICES + 0x00ff) & ~0x00ff) +
+ size = ALIGN(playback_ctrl_size, 0x100) +
+ ALIGN(chip->bank_size_playback * 2 * YDSXG_PLAYBACK_VOICES, 0x100) +
+ ALIGN(chip->bank_size_capture * 2 * YDSXG_CAPTURE_VOICES, 0x100) +
+ ALIGN(chip->bank_size_effect * 2 * YDSXG_EFFECT_VOICES, 0x100) +
chip->work_size;
/* work_ptr must be aligned to 256 bytes, but it's already
covered with the kernel page allocation mechanism */
@@ -2043,8 +2044,8 @@
chip->bank_base_playback_addr = ptr_addr;
chip->ctrl_playback = (u32 *)ptr;
chip->ctrl_playback[0] = cpu_to_le32(YDSXG_PLAYBACK_VOICES);
- ptr += (playback_ctrl_size + 0x00ff) & ~0x00ff;
- ptr_addr += (playback_ctrl_size + 0x00ff) & ~0x00ff;
+ ptr += ALIGN(playback_ctrl_size, 0x100);
+ ptr_addr += ALIGN(playback_ctrl_size, 0x100);
for (voice = 0; voice < YDSXG_PLAYBACK_VOICES; voice++) {
chip->voices[voice].number = voice;
chip->voices[voice].bank = (struct snd_ymfpci_playback_bank *)ptr;
@@ -2055,8 +2056,8 @@
ptr_addr += chip->bank_size_playback;
}
}
- ptr = (char *)(((unsigned long)ptr + 0x00ff) & ~0x00ff);
- ptr_addr = (ptr_addr + 0x00ff) & ~0x00ff;
+ ptr = (char *)ALIGN((unsigned long)ptr, 0x100);
+ ptr_addr = ALIGN(ptr_addr, 0x100);
chip->bank_base_capture = ptr;
chip->bank_base_capture_addr = ptr_addr;
for (voice = 0; voice < YDSXG_CAPTURE_VOICES; voice++)
@@ -2065,8 +2066,8 @@
ptr += chip->bank_size_capture;
ptr_addr += chip->bank_size_capture;
}
- ptr = (char *)(((unsigned long)ptr + 0x00ff) & ~0x00ff);
- ptr_addr = (ptr_addr + 0x00ff) & ~0x00ff;
+ ptr = (char *)ALIGN((unsigned long)ptr, 0x100);
+ ptr_addr = ALIGN(ptr_addr, 0x100);
chip->bank_base_effect = ptr;
chip->bank_base_effect_addr = ptr_addr;
for (voice = 0; voice < YDSXG_EFFECT_VOICES; voice++)
@@ -2075,8 +2076,8 @@
ptr += chip->bank_size_effect;
ptr_addr += chip->bank_size_effect;
}
- ptr = (char *)(((unsigned long)ptr + 0x00ff) & ~0x00ff);
- ptr_addr = (ptr_addr + 0x00ff) & ~0x00ff;
+ ptr = (char *)ALIGN((unsigned long)ptr, 0x100);
+ ptr_addr = ALIGN(ptr_addr, 0x100);
chip->work_base = ptr;
chip->work_base_addr = ptr_addr;
@@ -2153,7 +2154,7 @@
snd_dma_free_pages(&chip->work_ptr);
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, chip);
release_and_free_resource(chip->res_reg_area);
pci_write_config_word(chip->pci, 0x40, chip->old_legacy_ctrl);
@@ -2290,7 +2291,7 @@
chip->pci = pci;
chip->irq = -1;
chip->device_id = pci->device;
- pci_read_config_byte(pci, PCI_REVISION_ID, (u8 *)&chip->rev);
+ pci_read_config_byte(pci, PCI_REVISION_ID, &chip->rev);
chip->reg_area_phys = pci_resource_start(pci, 0);
chip->reg_area_virt = ioremap_nocache(chip->reg_area_phys, 0x8000);
pci_set_master(pci);
@@ -2300,7 +2301,8 @@
snd_ymfpci_free(chip);
return -EBUSY;
}
- if (request_irq(pci->irq, snd_ymfpci_interrupt, IRQF_DISABLED|IRQF_SHARED, "YMFPCI", (void *) chip)) {
+ if (request_irq(pci->irq, snd_ymfpci_interrupt, IRQF_SHARED,
+ "YMFPCI", chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_ymfpci_free(chip);
return -EBUSY;
@@ -2322,7 +2324,6 @@
return -EIO;
}
- chip->rear_swap = 1;
if ((err = snd_ymfpci_ac3_init(chip)) < 0) {
snd_ymfpci_free(chip);
return err;
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index 67202b9..3d7f36f 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -3577,8 +3577,7 @@
printk(KERN_WARNING "invalid nrpacks value.\n");
return -EINVAL;
}
- usb_register(&usb_audio_driver);
- return 0;
+ return usb_register(&usb_audio_driver);
}