sdhci: add support to ENE-CB714
Added its pci_id and implemented a quirk for it because this
controller needs to reset cmd and data when setting ios.
Signed-off-by: Leandro Dorileo <dorileo@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 56de4c4..dd4bfb5 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -34,6 +34,7 @@
/* Controller doesn't like some resets when there is no card inserted. */
#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
+#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
static const struct pci_device_id pci_ids[] __devinitdata = {
{
@@ -78,6 +79,24 @@
.driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE,
},
+ {
+ .vendor = PCI_VENDOR_ID_ENE,
+ .device = PCI_DEVICE_ID_ENE_CB714_SD,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
+ SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_ENE,
+ .device = PCI_DEVICE_ID_ENE_CB714_SD_2,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
+ SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS,
+ },
+
{ /* Generic SD host controller */
PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
},
@@ -759,6 +778,14 @@
writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
+ /*
+ * Some (ENE) controllers go apeshit on some ios operation,
+ * signalling timeout and CRC errors even on CMD0. Resetting
+ * it on each ios seems to solve the problem.
+ */
+ if(host->chip->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
+ sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+
mmiowb();
spin_unlock_irqrestore(&host->lock, flags);
}