net: dsa: b53: Move Broadcom header setup to b53
The code to enable Broadcom tags/headers is largely switch independent,
and in preparation for enabling it for multiple devices with b53, move
the code we have in bcm_sf2.c to b53_common.c
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 8acbd17..49cb512 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -60,45 +60,6 @@ static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
}
}
-static void bcm_sf2_brcm_hdr_setup(struct bcm_sf2_priv *priv, int port)
-{
- u32 reg, val;
-
- /* Resolve which bit controls the Broadcom tag */
- switch (port) {
- case 8:
- val = BRCM_HDR_EN_P8;
- break;
- case 7:
- val = BRCM_HDR_EN_P7;
- break;
- case 5:
- val = BRCM_HDR_EN_P5;
- break;
- default:
- val = 0;
- break;
- }
-
- /* Enable Broadcom tags for IMP port */
- reg = core_readl(priv, CORE_BRCM_HDR_CTRL);
- reg |= val;
- core_writel(priv, reg, CORE_BRCM_HDR_CTRL);
-
- /* Enable reception Broadcom tag for CPU TX (switch RX) to
- * allow us to tag outgoing frames
- */
- reg = core_readl(priv, CORE_BRCM_HDR_RX_DIS);
- reg &= ~(1 << port);
- core_writel(priv, reg, CORE_BRCM_HDR_RX_DIS);
-
- /* Enable transmission of Broadcom tags from the switch (CPU RX) to
- * allow delivering frames to the per-port net_devices
- */
- reg = core_readl(priv, CORE_BRCM_HDR_TX_DIS);
- reg &= ~(1 << port);
- core_writel(priv, reg, CORE_BRCM_HDR_TX_DIS);
-}
static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
{
@@ -138,7 +99,7 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
reg |= i << (PRT_TO_QID_SHIFT * i);
core_writel(priv, reg, CORE_PORT_TC2_QOS_MAP_PORT(port));
- bcm_sf2_brcm_hdr_setup(priv, port);
+ b53_brcm_hdr_setup(ds, port);
/* Force link status for IMP port */
reg = core_readl(priv, offset);
@@ -247,7 +208,7 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
/* Enable Broadcom tags for that port if requested */
if (priv->brcm_tag_mask & BIT(port))
- bcm_sf2_brcm_hdr_setup(priv, port);
+ b53_brcm_hdr_setup(ds, port);
/* Configure Traffic Class to QoS mapping, allow each priority to map
* to a different queue number