net: use core MTU range checking in misc drivers
firewire-net:
- set min/max_mtu
- remove fwnet_change_mtu
nes:
- set max_mtu
- clean up nes_netdev_change_mtu
xpnet:
- set min/max_mtu
- remove xpnet_dev_change_mtu
hippi:
- set min/max_mtu
- remove hippi_change_mtu
batman-adv:
- set max_mtu
- remove batadv_interface_change_mtu
- initialization is a little async, not 100% certain that max_mtu is set
in the optimal place, don't have hardware to test with
rionet:
- set min/max_mtu
- remove rionet_change_mtu
slip:
- set min/max_mtu
- streamline sl_change_mtu
um/net_kern:
- remove pointless ndo_change_mtu
hsi/clients/ssi_protocol:
- use core MTU range checking
- remove now redundant ssip_pn_set_mtu
ipoib:
- set a default max MTU value
- Note: ipoib's actual max MTU can vary, depending on if the device is in
connected mode or not, so we'll just set the max_mtu value to the max
possible, and let the ndo_change_mtu function continue to validate any new
MTU change requests with checks for CM or not. Note that ipoib has no
min_mtu set, and thus, the network core's mtu > 0 check is the only lower
bounds here.
mptlan:
- use net core MTU range checking
- remove now redundant mpt_lan_change_mtu
fddi:
- min_mtu = 21, max_mtu = 4470
- remove now redundant fddi_change_mtu (including export)
fjes:
- min_mtu = 8192, max_mtu = 65536
- The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to
get past the core net MTU range checks so fjes_change_mtu can validate a
new MTU against what it supports (see fjes_support_mtu in fjes_hw.c)
hsr:
- min_mtu = 0 (calls ether_setup, max_mtu is 1500)
f_phonet:
- min_mtu = 6, max_mtu = 65541
u_ether:
- min_mtu = 14, max_mtu = 15412
phonet/pep-gprs:
- min_mtu = 576, max_mtu = 65530
- remove redundant gprs_set_mtu
CC: netdev@vger.kernel.org
CC: linux-rdma@vger.kernel.org
CC: Stefan Richter <stefanr@s5r6.in-berlin.de>
CC: Faisal Latif <faisal.latif@intel.com>
CC: linux-rdma@vger.kernel.org
CC: Cliff Whickman <cpw@sgi.com>
CC: Robin Holt <robinmholt@gmail.com>
CC: Jes Sorensen <jes@trained-monkey.org>
CC: Marek Lindner <mareklindner@neomailbox.ch>
CC: Simon Wunderlich <sw@simonwunderlich.de>
CC: Antonio Quartulli <a@unstable.cc>
CC: Sathya Prakash <sathya.prakash@broadcom.com>
CC: Chaitra P B <chaitra.basappa@broadcom.com>
CC: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
CC: MPT-FusionLinux.pdl@broadcom.com
CC: Sebastian Reichel <sre@kernel.org>
CC: Felipe Balbi <balbi@kernel.org>
CC: Arvid Brodin <arvid.brodin@alten.se>
CC: Remi Denis-Courmont <courmisch@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c
index 6955c9e..55dd71b 100644
--- a/drivers/message/fusion/mptlan.c
+++ b/drivers/message/fusion/mptlan.c
@@ -549,16 +549,6 @@ mpt_lan_close(struct net_device *dev)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-static int
-mpt_lan_change_mtu(struct net_device *dev, int new_mtu)
-{
- if ((new_mtu < MPT_LAN_MIN_MTU) || (new_mtu > MPT_LAN_MAX_MTU))
- return -EINVAL;
- dev->mtu = new_mtu;
- return 0;
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/* Tx timeout handler. */
static void
mpt_lan_tx_timeout(struct net_device *dev)
@@ -1304,7 +1294,6 @@ static const struct net_device_ops mpt_netdev_ops = {
.ndo_open = mpt_lan_open,
.ndo_stop = mpt_lan_close,
.ndo_start_xmit = mpt_lan_sdu_send,
- .ndo_change_mtu = mpt_lan_change_mtu,
.ndo_tx_timeout = mpt_lan_tx_timeout,
};
@@ -1375,6 +1364,10 @@ mpt_register_lan_device (MPT_ADAPTER *mpt_dev, int pnum)
dev->netdev_ops = &mpt_netdev_ops;
dev->watchdog_timeo = MPT_LAN_TX_TIMEOUT;
+ /* MTU range: 96 - 65280 */
+ dev->min_mtu = MPT_LAN_MIN_MTU;
+ dev->max_mtu = MPT_LAN_MAX_MTU;
+
dlprintk((KERN_INFO MYNAM ": Finished registering dev "
"and setting initial values\n"));