drm/i915: Use the watermark latency values from dev_priv for ILK/SNB/IVB too
Adjust the current ILK/SNB/IVB watermark codepaths to use the
pre-populated latency values from dev_priv instead of reading
them out from the registers every time.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 856c094..ccaadc8 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -1680,9 +1680,6 @@
I915_WRITE(FW_BLC, fwater_lo);
}
-#define ILK_LP0_PLANE_LATENCY 700
-#define ILK_LP0_CURSOR_LATENCY 1300
-
/*
* Check the wm result.
*
@@ -1797,9 +1794,9 @@
enabled = 0;
if (g4x_compute_wm0(dev, PIPE_A,
&ironlake_display_wm_info,
- ILK_LP0_PLANE_LATENCY,
+ dev_priv->wm.pri_latency[0] * 100,
&ironlake_cursor_wm_info,
- ILK_LP0_CURSOR_LATENCY,
+ dev_priv->wm.cur_latency[0] * 100,
&plane_wm, &cursor_wm)) {
I915_WRITE(WM0_PIPEA_ILK,
(plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
@@ -1811,9 +1808,9 @@
if (g4x_compute_wm0(dev, PIPE_B,
&ironlake_display_wm_info,
- ILK_LP0_PLANE_LATENCY,
+ dev_priv->wm.pri_latency[0] * 100,
&ironlake_cursor_wm_info,
- ILK_LP0_CURSOR_LATENCY,
+ dev_priv->wm.cur_latency[0] * 100,
&plane_wm, &cursor_wm)) {
I915_WRITE(WM0_PIPEB_ILK,
(plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
@@ -1837,7 +1834,7 @@
/* WM1 */
if (!ironlake_compute_srwm(dev, 1, enabled,
- ILK_READ_WM1_LATENCY() * 500,
+ dev_priv->wm.pri_latency[1] * 500,
&ironlake_display_srwm_info,
&ironlake_cursor_srwm_info,
&fbc_wm, &plane_wm, &cursor_wm))
@@ -1845,14 +1842,14 @@
I915_WRITE(WM1_LP_ILK,
WM1_LP_SR_EN |
- (ILK_READ_WM1_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+ (dev_priv->wm.pri_latency[1] << WM1_LP_LATENCY_SHIFT) |
(fbc_wm << WM1_LP_FBC_SHIFT) |
(plane_wm << WM1_LP_SR_SHIFT) |
cursor_wm);
/* WM2 */
if (!ironlake_compute_srwm(dev, 2, enabled,
- ILK_READ_WM2_LATENCY() * 500,
+ dev_priv->wm.pri_latency[2] * 500,
&ironlake_display_srwm_info,
&ironlake_cursor_srwm_info,
&fbc_wm, &plane_wm, &cursor_wm))
@@ -1860,7 +1857,7 @@
I915_WRITE(WM2_LP_ILK,
WM2_LP_EN |
- (ILK_READ_WM2_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+ (dev_priv->wm.pri_latency[2] << WM1_LP_LATENCY_SHIFT) |
(fbc_wm << WM1_LP_FBC_SHIFT) |
(plane_wm << WM1_LP_SR_SHIFT) |
cursor_wm);
@@ -1874,7 +1871,7 @@
static void sandybridge_update_wm(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int latency = SNB_READ_WM0_LATENCY() * 100; /* In unit 0.1us */
+ int latency = dev_priv->wm.pri_latency[0] * 100; /* In unit 0.1us */
u32 val;
int fbc_wm, plane_wm, cursor_wm;
unsigned int enabled;
@@ -1929,7 +1926,7 @@
/* WM1 */
if (!ironlake_compute_srwm(dev, 1, enabled,
- SNB_READ_WM1_LATENCY() * 500,
+ dev_priv->wm.pri_latency[1] * 500,
&sandybridge_display_srwm_info,
&sandybridge_cursor_srwm_info,
&fbc_wm, &plane_wm, &cursor_wm))
@@ -1937,14 +1934,14 @@
I915_WRITE(WM1_LP_ILK,
WM1_LP_SR_EN |
- (SNB_READ_WM1_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+ (dev_priv->wm.pri_latency[1] << WM1_LP_LATENCY_SHIFT) |
(fbc_wm << WM1_LP_FBC_SHIFT) |
(plane_wm << WM1_LP_SR_SHIFT) |
cursor_wm);
/* WM2 */
if (!ironlake_compute_srwm(dev, 2, enabled,
- SNB_READ_WM2_LATENCY() * 500,
+ dev_priv->wm.pri_latency[2] * 500,
&sandybridge_display_srwm_info,
&sandybridge_cursor_srwm_info,
&fbc_wm, &plane_wm, &cursor_wm))
@@ -1952,14 +1949,14 @@
I915_WRITE(WM2_LP_ILK,
WM2_LP_EN |
- (SNB_READ_WM2_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+ (dev_priv->wm.pri_latency[2] << WM1_LP_LATENCY_SHIFT) |
(fbc_wm << WM1_LP_FBC_SHIFT) |
(plane_wm << WM1_LP_SR_SHIFT) |
cursor_wm);
/* WM3 */
if (!ironlake_compute_srwm(dev, 3, enabled,
- SNB_READ_WM3_LATENCY() * 500,
+ dev_priv->wm.pri_latency[3] * 500,
&sandybridge_display_srwm_info,
&sandybridge_cursor_srwm_info,
&fbc_wm, &plane_wm, &cursor_wm))
@@ -1967,7 +1964,7 @@
I915_WRITE(WM3_LP_ILK,
WM3_LP_EN |
- (SNB_READ_WM3_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+ (dev_priv->wm.pri_latency[3] << WM1_LP_LATENCY_SHIFT) |
(fbc_wm << WM1_LP_FBC_SHIFT) |
(plane_wm << WM1_LP_SR_SHIFT) |
cursor_wm);
@@ -1976,7 +1973,7 @@
static void ivybridge_update_wm(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int latency = SNB_READ_WM0_LATENCY() * 100; /* In unit 0.1us */
+ int latency = dev_priv->wm.pri_latency[0] * 100; /* In unit 0.1us */
u32 val;
int fbc_wm, plane_wm, cursor_wm;
int ignore_fbc_wm, ignore_plane_wm, ignore_cursor_wm;
@@ -2046,7 +2043,7 @@
/* WM1 */
if (!ironlake_compute_srwm(dev, 1, enabled,
- SNB_READ_WM1_LATENCY() * 500,
+ dev_priv->wm.pri_latency[1] * 500,
&sandybridge_display_srwm_info,
&sandybridge_cursor_srwm_info,
&fbc_wm, &plane_wm, &cursor_wm))
@@ -2054,14 +2051,14 @@
I915_WRITE(WM1_LP_ILK,
WM1_LP_SR_EN |
- (SNB_READ_WM1_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+ (dev_priv->wm.pri_latency[1] << WM1_LP_LATENCY_SHIFT) |
(fbc_wm << WM1_LP_FBC_SHIFT) |
(plane_wm << WM1_LP_SR_SHIFT) |
cursor_wm);
/* WM2 */
if (!ironlake_compute_srwm(dev, 2, enabled,
- SNB_READ_WM2_LATENCY() * 500,
+ dev_priv->wm.pri_latency[2] * 500,
&sandybridge_display_srwm_info,
&sandybridge_cursor_srwm_info,
&fbc_wm, &plane_wm, &cursor_wm))
@@ -2069,19 +2066,19 @@
I915_WRITE(WM2_LP_ILK,
WM2_LP_EN |
- (SNB_READ_WM2_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+ (dev_priv->wm.pri_latency[2] << WM1_LP_LATENCY_SHIFT) |
(fbc_wm << WM1_LP_FBC_SHIFT) |
(plane_wm << WM1_LP_SR_SHIFT) |
cursor_wm);
/* WM3, note we have to correct the cursor latency */
if (!ironlake_compute_srwm(dev, 3, enabled,
- SNB_READ_WM3_LATENCY() * 500,
+ dev_priv->wm.pri_latency[3] * 500,
&sandybridge_display_srwm_info,
&sandybridge_cursor_srwm_info,
&fbc_wm, &plane_wm, &ignore_cursor_wm) ||
!ironlake_compute_srwm(dev, 3, enabled,
- 2 * SNB_READ_WM3_LATENCY() * 500,
+ dev_priv->wm.cur_latency[3] * 500,
&sandybridge_display_srwm_info,
&sandybridge_cursor_srwm_info,
&ignore_fbc_wm, &ignore_plane_wm, &cursor_wm))
@@ -2089,7 +2086,7 @@
I915_WRITE(WM3_LP_ILK,
WM3_LP_EN |
- (SNB_READ_WM3_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+ (dev_priv->wm.pri_latency[3] << WM1_LP_LATENCY_SHIFT) |
(fbc_wm << WM1_LP_FBC_SHIFT) |
(plane_wm << WM1_LP_SR_SHIFT) |
cursor_wm);
@@ -2833,7 +2830,7 @@
bool enable, bool scaled)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int latency = SNB_READ_WM0_LATENCY() * 100; /* In unit 0.1us */
+ int latency = dev_priv->wm.spr_latency[0] * 100; /* In unit 0.1us */
u32 val;
int sprite_wm, reg;
int ret;
@@ -2873,7 +2870,7 @@
ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
pixel_size,
&sandybridge_display_srwm_info,
- SNB_READ_WM1_LATENCY() * 500,
+ dev_priv->wm.spr_latency[1] * 500,
&sprite_wm);
if (!ret) {
DRM_DEBUG_KMS("failed to compute sprite lp1 wm on pipe %c\n",
@@ -2889,7 +2886,7 @@
ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
pixel_size,
&sandybridge_display_srwm_info,
- SNB_READ_WM2_LATENCY() * 500,
+ dev_priv->wm.spr_latency[2] * 500,
&sprite_wm);
if (!ret) {
DRM_DEBUG_KMS("failed to compute sprite lp2 wm on pipe %c\n",
@@ -2901,7 +2898,7 @@
ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
pixel_size,
&sandybridge_display_srwm_info,
- SNB_READ_WM3_LATENCY() * 500,
+ dev_priv->wm.spr_latency[3] * 500,
&sprite_wm);
if (!ret) {
DRM_DEBUG_KMS("failed to compute sprite lp3 wm on pipe %c\n",