net: sfp: split power mode switching from probe
Switch the power mode switching from the probe, so that we don't
repeatedly re-probe the SFP device if there is a problem accessing
the registers at I2C address 0x51.
In splitting this out, we can also fix a bug where we leave the module
in high-power mode when the upstream device is detached but the module
is still inserted.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index bb4ede8..66946ac 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -49,6 +49,7 @@ enum {
SFP_MOD_EMPTY = 0,
SFP_MOD_PROBE,
SFP_MOD_HPOWER,
+ SFP_MOD_WAITPWR,
SFP_MOD_PRESENT,
SFP_MOD_ERROR,
@@ -71,6 +72,7 @@ static const char * const mod_state_strings[] = {
[SFP_MOD_EMPTY] = "empty",
[SFP_MOD_PROBE] = "probe",
[SFP_MOD_HPOWER] = "hpower",
+ [SFP_MOD_WAITPWR] = "waitpwr",
[SFP_MOD_PRESENT] = "present",
[SFP_MOD_ERROR] = "error",
};
@@ -1423,37 +1425,34 @@ static int sfp_module_parse_power(struct sfp *sfp)
return 0;
}
-static int sfp_sm_mod_hpower(struct sfp *sfp)
+static int sfp_sm_mod_hpower(struct sfp *sfp, bool enable)
{
u8 val;
int err;
- if (sfp->module_power_mW <= 1000)
- return 0;
-
err = sfp_read(sfp, true, SFP_EXT_STATUS, &val, sizeof(val));
if (err != sizeof(val)) {
dev_err(sfp->dev, "Failed to read EEPROM: %d\n", err);
- err = -EAGAIN;
- goto err;
+ return -EAGAIN;
}
- val |= BIT(0);
+ if (enable)
+ val |= BIT(0);
+ else
+ val &= ~BIT(0);
err = sfp_write(sfp, true, SFP_EXT_STATUS, &val, sizeof(val));
if (err != sizeof(val)) {
dev_err(sfp->dev, "Failed to write EEPROM: %d\n", err);
- err = -EAGAIN;
- goto err;
+ return -EAGAIN;
}
- dev_info(sfp->dev, "Module switched to %u.%uW power level\n",
- sfp->module_power_mW / 1000,
- (sfp->module_power_mW / 100) % 10);
- return T_HPOWER_LEVEL;
+ if (enable)
+ dev_info(sfp->dev, "Module switched to %u.%uW power level\n",
+ sfp->module_power_mW / 1000,
+ (sfp->module_power_mW / 100) % 10);
-err:
- return err;
+ return 0;
}
static int sfp_sm_mod_probe(struct sfp *sfp)
@@ -1549,7 +1548,7 @@ static int sfp_sm_mod_probe(struct sfp *sfp)
if (ret < 0)
return ret;
- return sfp_sm_mod_hpower(sfp);
+ return 0;
}
static void sfp_sm_mod_remove(struct sfp *sfp)
@@ -1594,13 +1593,22 @@ static void sfp_sm_device(struct sfp *sfp, unsigned int event)
*/
static void sfp_sm_module(struct sfp *sfp, unsigned int event)
{
- /* Handle remove event globally, it resets this state machine.
- * Also deal with upstream detachment.
- */
- if (event == SFP_E_REMOVE || sfp->sm_dev_state < SFP_DEV_DOWN) {
+ int err;
+
+ /* Handle remove event globally, it resets this state machine */
+ if (event == SFP_E_REMOVE) {
if (sfp->sm_mod_state > SFP_MOD_PROBE)
sfp_sm_mod_remove(sfp);
- if (sfp->sm_mod_state != SFP_MOD_EMPTY)
+ sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
+ return;
+ }
+
+ /* Handle device detach globally */
+ if (sfp->sm_dev_state < SFP_DEV_DOWN) {
+ if (sfp->module_power_mW > 1000 &&
+ sfp->sm_mod_state > SFP_MOD_HPOWER)
+ sfp_sm_mod_hpower(sfp, false);
+ if (sfp->sm_mod_state > SFP_MOD_EMPTY)
sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
return;
}
@@ -1612,26 +1620,45 @@ static void sfp_sm_module(struct sfp *sfp, unsigned int event)
break;
case SFP_MOD_PROBE:
- if (event == SFP_E_TIMEOUT) {
- int val = sfp_sm_mod_probe(sfp);
+ if (event != SFP_E_TIMEOUT)
+ break;
- if (val == 0)
- sfp_sm_mod_next(sfp, SFP_MOD_PRESENT, 0);
- else if (val > 0)
- sfp_sm_mod_next(sfp, SFP_MOD_HPOWER, val);
- else if (val != -EAGAIN)
- sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
- else
- sfp_sm_set_timer(sfp, T_PROBE_RETRY);
- }
- break;
-
- case SFP_MOD_HPOWER:
- if (event == SFP_E_TIMEOUT) {
- sfp_sm_mod_next(sfp, SFP_MOD_PRESENT, 0);
+ err = sfp_sm_mod_probe(sfp);
+ if (err == -EAGAIN) {
+ sfp_sm_set_timer(sfp, T_PROBE_RETRY);
break;
}
- /* fallthrough */
+ if (err < 0) {
+ sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
+ break;
+ }
+
+ /* If this is a power level 1 module, we are done */
+ if (sfp->module_power_mW <= 1000)
+ goto insert;
+
+ sfp_sm_mod_next(sfp, SFP_MOD_HPOWER, 0);
+ /* fall through */
+ case SFP_MOD_HPOWER:
+ /* Enable high power mode */
+ err = sfp_sm_mod_hpower(sfp, true);
+ if (err == 0)
+ sfp_sm_mod_next(sfp, SFP_MOD_WAITPWR, T_HPOWER_LEVEL);
+ else if (err != -EAGAIN)
+ sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
+ else
+ sfp_sm_set_timer(sfp, T_PROBE_RETRY);
+ break;
+
+ case SFP_MOD_WAITPWR:
+ /* Wait for T_HPOWER_LEVEL to time out */
+ if (event != SFP_E_TIMEOUT)
+ break;
+
+ insert:
+ sfp_sm_mod_next(sfp, SFP_MOD_PRESENT, 0);
+ break;
+
case SFP_MOD_PRESENT:
case SFP_MOD_ERROR:
break;