ARM: realview: add device tree for PB11MPCore
This adds a device tree for the ARM RealView ARM11MPCore
reference design.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 30bbc37..e66743b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -510,7 +510,8 @@
qcom-msm8960-cdp.dtb \
qcom-msm8974-sony-xperia-honami.dtb
dtb-$(CONFIG_ARCH_REALVIEW) += \
- arm-realview-pb1176.dtb
+ arm-realview-pb1176.dtb \
+ arm-realview-pb11mp.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3066a-bqcurie2.dtb \
rk3066a-marsboard.dtb \
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
new file mode 100644
index 0000000..896bd21
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -0,0 +1,668 @@
+/*
+ * Copyright 2015 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+ model = "ARM RealView PB11MPcore";
+ compatible = "arm,realview-pb11mp";
+
+ chosen { };
+
+ aliases {
+ serial0 = &pb11mp_serial0;
+ serial1 = &pb11mp_serial1;
+ serial2 = &pb11mp_serial2;
+ serial3 = &pb11mp_serial3;
+ };
+
+ memory {
+ /*
+ * The PB11MPCore has 512 MiB memory @ 0x70000000
+ * and the first 256 are also remapped @ 0x00000000
+ */
+ reg = <0x70000000 0x20000000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "arm,realview-smp";
+
+ MP11_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,arm11mpcore";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ MP11_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,arm11mpcore";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ MP11_2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,arm11mpcore";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+
+ MP11_3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,arm11mpcore";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ /* Primary TestChip GIC synthesized with the CPU */
+ intc_tc11mp: interrupt-controller@1f000100 {
+ compatible = "arm,tc11mp-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x1f001000 0x1000>,
+ <0x1f000100 0x100>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,l220-cache";
+ reg = <0x1f002000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
+ <0 30 IRQ_TYPE_LEVEL_HIGH>,
+ <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ scu@1f000000 {
+ compatible = "arm,arm11mp-scu";
+ reg = <0x1f000000 0x100>;
+ };
+
+ timer@1f000600 {
+ compatible = "arm,arm11mp-twd-timer";
+ reg = <0x1f000600 0x20>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <1 13 0xf04>;
+ };
+
+ watchdog@1f000620 {
+ compatible = "arm,arm11mp-twd-wdt";
+ reg = <0x1f000620 0x20>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <1 14 0xf04>;
+ };
+
+ /* PMU with one IRQ line per core */
+ pmu {
+ compatible = "arm,arm11mpcore-pmu";
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
+ };
+
+ /* The voltage to the MMC card is hardwired at 3.3V */
+ vmmc: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ veth: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "veth";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ xtal24mhz: xtal24mhz@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ timclk: timclk@1M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <24>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ mclk: mclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ kmiclk: kmiclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ sspclk: sspclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ uartclk: uartclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ wdogclk: wdogclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ /* FIXME: this actually hangs off the PLL clocks */
+ pclk: pclk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ flash0@40000000 {
+ /* 2 * 32MiB NOR Flash memory */
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0x40000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ flash1@44000000 {
+ // 2 * 32MiB NOR Flash memory
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0x44000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,realview-pb11mp-soc", "simple-bus";
+ regmap = <&pb11mp_syscon>;
+ ranges;
+
+ pb11mp_syscon: syscon@10000000 {
+ compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
+ reg = <0x10000000 0x1000>;
+
+ led@08.0 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x01>;
+ label = "versatile:0";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ led@08.1 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x02>;
+ label = "versatile:1";
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+ led@08.2 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x04>;
+ label = "versatile:2";
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+ led@08.3 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x08>;
+ label = "versatile:3";
+ linux,default-trigger = "cpu1";
+ default-state = "off";
+ };
+ led@08.4 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x10>;
+ label = "versatile:4";
+ linux,default-trigger = "cpu2";
+ default-state = "off";
+ };
+ led@08.5 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x20>;
+ label = "versatile:5";
+ linux,default-trigger = "cpu3";
+ default-state = "off";
+ };
+ led@08.6 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x40>;
+ label = "versatile:6";
+ default-state = "off";
+ };
+ led@08.7 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x80>;
+ label = "versatile:7";
+ default-state = "off";
+ };
+
+ oscclk0: osc0@0c {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x0C>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk1: osc1@10 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x10>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk2: osc2@14 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x14>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk3: osc3@18 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x18>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk4: osc4@1c {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x1c>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk5: osc5@d4 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0xd4>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk6: osc6@d8 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0xd8>;
+ clocks = <&xtal24mhz>;
+ };
+ };
+
+ sp810_syscon: sysctl@10001000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x10001000 0x1000>;
+ clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclk0",
+ "timerclk1",
+ "timerclk2",
+ "timerclk3";
+ assigned-clocks = <&sp810_syscon 0>,
+ <&sp810_syscon 1>,
+ <&sp810_syscon 2>,
+ <&sp810_syscon 3>;
+ assigned-clock-parents = <&timclk>,
+ <&timclk>,
+ <&timclk>,
+ <&timclk>;
+ };
+
+ i2c0: i2c@10002000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "arm,versatile-i2c";
+ reg = <0x10002000 0x1000>;
+
+ rtc@68 {
+ compatible = "dallas,ds1338";
+ reg = <0x68>;
+ };
+ };
+
+ aaci: aaci@10004000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x10004000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ mci: mmcsd@10005000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x10005000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 IRQ_TYPE_LEVEL_HIGH>;
+ /* Due to frequent FIFO overruns, use just 500 kHz */
+ max-frequency = <500000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ clocks = <&mclk>, <&pclk>;
+ clock-names = "mclk", "apb_pclk";
+ vmmc-supply = <&vmmc>;
+ cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ kmi0: kmi@10006000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x10006000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ kmi1: kmi@10007000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x10007000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ pb11mp_serial0: serial@10009000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x10009000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ pb11mp_serial1: serial@1000a000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1000a000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ pb11mp_serial2: serial@1000b000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1000b000 0x1000>;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ pb11mp_serial3: serial@1000c000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1000c000 0x1000>;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ ssp@1000d000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x1000d000 0x1000>;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sspclk>, <&pclk>;
+ clock-names = "SSPCLK", "apb_pclk";
+ };
+
+ watchdog@1000f000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x1000f000 0x1000>;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&wdogclk>, <&pclk>;
+ clock-names = "wdogclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ watchdog@10010000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x10010000 0x1000>;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&wdogclk>, <&pclk>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
+
+ timer01: timer@10011000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10011000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
+ arm,sp804-has-irq = <1>;
+ clocks = <&sp810_syscon 0>,
+ <&sp810_syscon 1>,
+ <&pclk>;
+ clock-names = "timerclk0",
+ "timerclk1",
+ "apb_pclk";
+ };
+
+ timer23: timer@10012000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10012000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+ arm,sp804-has-irq = <1>;
+ clocks = <&sp810_syscon 2>,
+ <&sp810_syscon 3>,
+ <&pclk>;
+ clock-names = "timerclk2",
+ "timerclk3",
+ "apb_pclk";
+ };
+
+ gpio0: gpio@10013000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x10013000 0x1000>;
+ gpio-controller;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio1: gpio@10014000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x10014000 0x1000>;
+ gpio-controller;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio2: gpio@10015000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x10015000 0x1000>;
+ gpio-controller;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ rtc: rtc@10017000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x10017000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ timer45: timer@10018000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10018000 0x1000>;
+ clocks = <&timclk>, <&pclk>;
+ clock-names = "timer", "apb_pclk";
+ status = "disabled";
+ };
+
+ timer67: timer@10019000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10019000 0x1000>;
+ clocks = <&timclk>, <&pclk>;
+ clock-names = "timer", "apb_pclk";
+ status = "disabled";
+ };
+
+
+ clcd@10020000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x10020000 0x1000>;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupt-names = "combined";
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&oscclk4>, <&pclk>;
+ clock-names = "clcdclk", "apb_pclk";
+ max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */
+
+ port {
+ clcd_pads: endpoint {
+ remote-endpoint = <&clcd_panel>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+ };
+ };
+
+ panel {
+ compatible = "panel-dpi";
+
+ port {
+ clcd_panel: endpoint {
+ remote-endpoint = <&clcd_pads>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <63500127>;
+ hactive = <1024>;
+ hback-porch = <152>;
+ hfront-porch = <48>;
+ hsync-len = <104>;
+ vactive = <768>;
+ vback-porch = <23>;
+ vfront-porch = <3>;
+ vsync-len = <4>;
+ };
+ };
+ };
+
+ /*
+ * This GIC on the Platform Baseboard is cascaded off the
+ * TestChip GIC
+ */
+ intc_pb11mp: interrupt-controller@1e000000 {
+ compatible = "arm,arm11mp-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x1e001000 0x1000>,
+ <0x1e000000 0x100>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* SMSC 9118 ethernet with PHY and EEPROM */
+ ethernet@4e000000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <0x4e000000 0x10000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ vdd33a-supply = <&veth>;
+ vddvario-supply = <&veth>;
+ };
+
+ usb@4f000000 {
+ compatible = "nxp,usb-isp1761";
+ reg = <0x4f000000 0x20000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+ port1-otg;
+ };
+ };
+};