diff --git a/drivers/slimbus/stream.c b/drivers/slimbus/stream.c
new file mode 100644
index 0000000..2fa0532
--- /dev/null
+++ b/drivers/slimbus/stream.c
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, Linaro Limited
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/slimbus.h>
+#include <uapi/sound/asound.h>
+#include "slimbus.h"
+
+/**
+ * struct segdist_code - Segment Distributions code from
+ *	Table 20 of SLIMbus Specs Version 2.0
+ *
+ * @ratem: Channel Rate Multipler(Segments per Superframe)
+ * @seg_interval: Number of slots between the first Slot of Segment
+ *		and the first slot of the next  consecutive Segment.
+ * @segdist_code: Segment Distribution Code SD[11:0]
+ * @seg_offset_mask: Segment offset mask in SD[11:0]
+ * @segdist_codes: List of all possible Segmet Distribution codes.
+ */
+static const struct segdist_code {
+	int ratem;
+	int seg_interval;
+	int segdist_code;
+	u32 seg_offset_mask;
+
+} segdist_codes[] = {
+	{1,	1536,	0x200,	 0xdff},
+	{2,	768,	0x100,	 0xcff},
+	{4,	384,	0x080,	 0xc7f},
+	{8,	192,	0x040,	 0xc3f},
+	{16,	96,	0x020,	 0xc1f},
+	{32,	48,	0x010,	 0xc0f},
+	{64,	24,	0x008,	 0xc07},
+	{128,	12,	0x004,	 0xc03},
+	{256,	6,	0x002,	 0xc01},
+	{512,	3,	0x001,	 0xc00},
+	{3,	512,	0xe00,	 0x1ff},
+	{6,	256,	0xd00,	 0x0ff},
+	{12,	128,	0xc80,	 0x07f},
+	{24,	64,	0xc40,	 0x03f},
+	{48,	32,	0xc20,	 0x01f},
+	{96,	16,	0xc10,	 0x00f},
+	{192,	8,	0xc08,	 0x007},
+	{364,	4,	0xc04,	 0x003},
+	{768,	2,	0xc02,	 0x001},
+};
+
+/*
+ * Presence Rate table for all Natural Frequencies
+ * The Presence rate of a constant bitrate stream is mean flow rate of the
+ * stream expressed in occupied Segments of that Data Channel per second.
+ * Table 66 from SLIMbus 2.0 Specs
+ *
+ * Index of the table corresponds to Presence rate code for the respective rate
+ * in the table.
+ */
+static const int slim_presence_rate_table[] = {
+	0, /* Not Indicated */
+	12000,
+	24000,
+	48000,
+	96000,
+	192000,
+	384000,
+	768000,
+	0, /* Reserved */
+	110250,
+	220500,
+	441000,
+	882000,
+	176400,
+	352800,
+	705600,
+	4000,
+	8000,
+	16000,
+	32000,
+	64000,
+	128000,
+	256000,
+	512000,
+};
+
+/*
+ * slim_stream_allocate() - Allocate a new SLIMbus Stream
+ * @dev:Slim device to be associated with
+ * @name: name of the stream
+ *
+ * This is very first call for SLIMbus streaming, this API will allocate
+ * a new SLIMbus stream and return a valid stream runtime pointer for client
+ * to use it in subsequent stream apis. state of stream is set to ALLOCATED
+ *
+ * Return: valid pointer on success and error code on failure.
+ * From ASoC DPCM framework, this state is linked to startup() operation.
+ */
+struct slim_stream_runtime *slim_stream_allocate(struct slim_device *dev,
+						 const char *name)
+{
+	struct slim_stream_runtime *rt;
+
+	rt = kzalloc(sizeof(*rt), GFP_KERNEL);
+	if (!rt)
+		return ERR_PTR(-ENOMEM);
+
+	rt->name = kasprintf(GFP_KERNEL, "slim-%s", name);
+	if (!rt->name) {
+		kfree(rt);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	rt->dev = dev;
+	spin_lock(&dev->stream_list_lock);
+	list_add_tail(&rt->node, &dev->stream_list);
+	spin_unlock(&dev->stream_list_lock);
+
+	return rt;
+}
+EXPORT_SYMBOL_GPL(slim_stream_allocate);
+
+static int slim_connect_port_channel(struct slim_stream_runtime *stream,
+				     struct slim_port *port)
+{
+	struct slim_device *sdev = stream->dev;
+	u8 wbuf[2];
+	struct slim_val_inf msg = {0, 2, NULL, wbuf, NULL};
+	u8 mc = SLIM_MSG_MC_CONNECT_SOURCE;
+	DEFINE_SLIM_LDEST_TXN(txn, mc, 6, stream->dev->laddr, &msg);
+
+	if (port->direction == SLIM_PORT_SINK)
+		txn.mc = SLIM_MSG_MC_CONNECT_SINK;
+
+	wbuf[0] = port->id;
+	wbuf[1] = port->ch.id;
+	port->ch.state = SLIM_CH_STATE_ASSOCIATED;
+	port->state = SLIM_PORT_UNCONFIGURED;
+
+	return slim_do_transfer(sdev->ctrl, &txn);
+}
+
+static int slim_disconnect_port(struct slim_stream_runtime *stream,
+				struct slim_port *port)
+{
+	struct slim_device *sdev = stream->dev;
+	u8 wbuf[1];
+	struct slim_val_inf msg = {0, 1, NULL, wbuf, NULL};
+	u8 mc = SLIM_MSG_MC_DISCONNECT_PORT;
+	DEFINE_SLIM_LDEST_TXN(txn, mc, 5, stream->dev->laddr, &msg);
+
+	wbuf[0] = port->id;
+	port->ch.state = SLIM_CH_STATE_DISCONNECTED;
+	port->state = SLIM_PORT_DISCONNECTED;
+
+	return slim_do_transfer(sdev->ctrl, &txn);
+}
+
+static int slim_deactivate_remove_channel(struct slim_stream_runtime *stream,
+					  struct slim_port *port)
+{
+	struct slim_device *sdev = stream->dev;
+	u8 wbuf[1];
+	struct slim_val_inf msg = {0, 1, NULL, wbuf, NULL};
+	u8 mc = SLIM_MSG_MC_NEXT_DEACTIVATE_CHANNEL;
+	DEFINE_SLIM_LDEST_TXN(txn, mc, 5, stream->dev->laddr, &msg);
+	int ret;
+
+	wbuf[0] = port->ch.id;
+	ret = slim_do_transfer(sdev->ctrl, &txn);
+	if (ret)
+		return ret;
+
+	txn.mc = SLIM_MSG_MC_NEXT_REMOVE_CHANNEL;
+	port->ch.state = SLIM_CH_STATE_REMOVED;
+
+	return slim_do_transfer(sdev->ctrl, &txn);
+}
+
+static int slim_get_prate_code(int rate)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(slim_presence_rate_table); i++) {
+		if (rate == slim_presence_rate_table[i])
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+/*
+ * slim_stream_prepare() - Prepare a SLIMbus Stream
+ *
+ * @rt: instance of slim stream runtime to configure
+ * @cfg: new configuration for the stream
+ *
+ * This API will configure SLIMbus stream with config parameters from cfg.
+ * return zero on success and error code on failure. From ASoC DPCM framework,
+ * this state is linked to hw_params() operation.
+ */
+int slim_stream_prepare(struct slim_stream_runtime *rt,
+			struct slim_stream_config *cfg)
+{
+	struct slim_controller *ctrl = rt->dev->ctrl;
+	struct slim_port *port;
+	int num_ports, i, port_id;
+
+	if (rt->ports) {
+		dev_err(&rt->dev->dev, "Stream already Prepared\n");
+		return -EINVAL;
+	}
+
+	num_ports = hweight32(cfg->port_mask);
+	rt->ports = kcalloc(num_ports, sizeof(*port), GFP_KERNEL);
+	if (!rt->ports)
+		return -ENOMEM;
+
+	rt->num_ports = num_ports;
+	rt->rate = cfg->rate;
+	rt->bps = cfg->bps;
+	rt->direction = cfg->direction;
+
+	if (cfg->rate % ctrl->a_framer->superfreq) {
+		/*
+		 * data rate not exactly multiple of super frame,
+		 * use PUSH/PULL protocol
+		 */
+		if (cfg->direction == SNDRV_PCM_STREAM_PLAYBACK)
+			rt->prot = SLIM_PROTO_PUSH;
+		else
+			rt->prot = SLIM_PROTO_PULL;
+	} else {
+		rt->prot = SLIM_PROTO_ISO;
+	}
+
+	rt->ratem = cfg->rate/ctrl->a_framer->superfreq;
+
+	i = 0;
+	for_each_set_bit(port_id, &cfg->port_mask, SLIM_DEVICE_MAX_PORTS) {
+		port = &rt->ports[i];
+		port->state = SLIM_PORT_DISCONNECTED;
+		port->id = port_id;
+		port->ch.prrate = slim_get_prate_code(cfg->rate);
+		port->ch.id = cfg->chs[i];
+		port->ch.data_fmt = SLIM_CH_DATA_FMT_NOT_DEFINED;
+		port->ch.aux_fmt = SLIM_CH_AUX_FMT_NOT_APPLICABLE;
+		port->ch.state = SLIM_CH_STATE_ALLOCATED;
+
+		if (cfg->direction == SNDRV_PCM_STREAM_PLAYBACK)
+			port->direction = SLIM_PORT_SINK;
+		else
+			port->direction = SLIM_PORT_SOURCE;
+
+		slim_connect_port_channel(rt, port);
+		i++;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(slim_stream_prepare);
+
+static int slim_define_channel_content(struct slim_stream_runtime *stream,
+				       struct slim_port *port)
+{
+	struct slim_device *sdev = stream->dev;
+	u8 wbuf[4];
+	struct slim_val_inf msg = {0, 4, NULL, wbuf, NULL};
+	u8 mc = SLIM_MSG_MC_NEXT_DEFINE_CONTENT;
+	DEFINE_SLIM_LDEST_TXN(txn, mc, 8, stream->dev->laddr, &msg);
+
+	wbuf[0] = port->ch.id;
+	wbuf[1] = port->ch.prrate;
+
+	/* Frequency Locked for ISO Protocol */
+	if (stream->prot != SLIM_PROTO_ISO)
+		wbuf[1] |= SLIM_CHANNEL_CONTENT_FL;
+
+	wbuf[2] = port->ch.data_fmt | (port->ch.aux_fmt << 4);
+	wbuf[3] = stream->bps/SLIM_SLOT_LEN_BITS;
+	port->ch.state = SLIM_CH_STATE_CONTENT_DEFINED;
+
+	return slim_do_transfer(sdev->ctrl, &txn);
+}
+
+static int slim_get_segdist_code(int ratem)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(segdist_codes); i++) {
+		if (segdist_codes[i].ratem == ratem)
+			return segdist_codes[i].segdist_code;
+	}
+
+	return -EINVAL;
+}
+
+static int slim_define_channel(struct slim_stream_runtime *stream,
+				       struct slim_port *port)
+{
+	struct slim_device *sdev = stream->dev;
+	u8 wbuf[4];
+	struct slim_val_inf msg = {0, 4, NULL, wbuf, NULL};
+	u8 mc = SLIM_MSG_MC_NEXT_DEFINE_CHANNEL;
+	DEFINE_SLIM_LDEST_TXN(txn, mc, 8, stream->dev->laddr, &msg);
+
+	port->ch.seg_dist = slim_get_segdist_code(stream->ratem);
+
+	wbuf[0] = port->ch.id;
+	wbuf[1] = port->ch.seg_dist & 0xFF;
+	wbuf[2] = (stream->prot << 4) | ((port->ch.seg_dist & 0xF00) >> 8);
+	if (stream->prot == SLIM_PROTO_ISO)
+		wbuf[3] = stream->bps/SLIM_SLOT_LEN_BITS;
+	else
+		wbuf[3] = stream->bps/SLIM_SLOT_LEN_BITS + 1;
+
+	port->ch.state = SLIM_CH_STATE_DEFINED;
+
+	return slim_do_transfer(sdev->ctrl, &txn);
+}
+
+static int slim_activate_channel(struct slim_stream_runtime *stream,
+				 struct slim_port *port)
+{
+	struct slim_device *sdev = stream->dev;
+	u8 wbuf[1];
+	struct slim_val_inf msg = {0, 1, NULL, wbuf, NULL};
+	u8 mc = SLIM_MSG_MC_NEXT_ACTIVATE_CHANNEL;
+	DEFINE_SLIM_LDEST_TXN(txn, mc, 5, stream->dev->laddr, &msg);
+
+	txn.msg->num_bytes = 1;
+	txn.msg->wbuf = wbuf;
+	wbuf[0] = port->ch.id;
+	port->ch.state = SLIM_CH_STATE_ACTIVE;
+
+	return slim_do_transfer(sdev->ctrl, &txn);
+}
+
+/*
+ * slim_stream_enable() - Enable a prepared SLIMbus Stream
+ *
+ * @stream: instance of slim stream runtime to enable
+ *
+ * This API will enable all the ports and channels associated with
+ * SLIMbus stream
+ *
+ * Return: zero on success and error code on failure. From ASoC DPCM framework,
+ * this state is linked to trigger() start operation.
+ */
+int slim_stream_enable(struct slim_stream_runtime *stream)
+{
+	DEFINE_SLIM_BCAST_TXN(txn, SLIM_MSG_MC_BEGIN_RECONFIGURATION,
+				3, SLIM_LA_MANAGER, NULL);
+	struct slim_controller *ctrl = stream->dev->ctrl;
+	int ret, i;
+
+	if (ctrl->enable_stream) {
+		ret = ctrl->enable_stream(stream);
+		if (ret)
+			return ret;
+
+		for (i = 0; i < stream->num_ports; i++)
+			stream->ports[i].ch.state = SLIM_CH_STATE_ACTIVE;
+
+		return ret;
+	}
+
+	ret = slim_do_transfer(ctrl, &txn);
+	if (ret)
+		return ret;
+
+	/* define channels first before activating them */
+	for (i = 0; i < stream->num_ports; i++) {
+		struct slim_port *port = &stream->ports[i];
+
+		slim_define_channel(stream, port);
+		slim_define_channel_content(stream, port);
+	}
+
+	for (i = 0; i < stream->num_ports; i++) {
+		struct slim_port *port = &stream->ports[i];
+
+		slim_activate_channel(stream, port);
+		port->state = SLIM_PORT_CONFIGURED;
+	}
+	txn.mc = SLIM_MSG_MC_RECONFIGURE_NOW;
+
+	return slim_do_transfer(ctrl, &txn);
+}
+EXPORT_SYMBOL_GPL(slim_stream_enable);
+
+/*
+ * slim_stream_disable() - Disable a SLIMbus Stream
+ *
+ * @stream: instance of slim stream runtime to disable
+ *
+ * This API will disable all the ports and channels associated with
+ * SLIMbus stream
+ *
+ * Return: zero on success and error code on failure. From ASoC DPCM framework,
+ * this state is linked to trigger() pause operation.
+ */
+int slim_stream_disable(struct slim_stream_runtime *stream)
+{
+	DEFINE_SLIM_BCAST_TXN(txn, SLIM_MSG_MC_BEGIN_RECONFIGURATION,
+				3, SLIM_LA_MANAGER, NULL);
+	struct slim_controller *ctrl = stream->dev->ctrl;
+	int ret, i;
+
+	if (ctrl->disable_stream)
+		ctrl->disable_stream(stream);
+
+	ret = slim_do_transfer(ctrl, &txn);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < stream->num_ports; i++)
+		slim_deactivate_remove_channel(stream, &stream->ports[i]);
+
+	txn.mc = SLIM_MSG_MC_RECONFIGURE_NOW;
+
+	return slim_do_transfer(ctrl, &txn);
+}
+EXPORT_SYMBOL_GPL(slim_stream_disable);
+
+/*
+ * slim_stream_unprepare() - Un-prepare a SLIMbus Stream
+ *
+ * @stream: instance of slim stream runtime to unprepare
+ *
+ * This API will un allocate all the ports and channels associated with
+ * SLIMbus stream
+ *
+ * Return: zero on success and error code on failure. From ASoC DPCM framework,
+ * this state is linked to trigger() stop operation.
+ */
+int slim_stream_unprepare(struct slim_stream_runtime *stream)
+{
+	int i;
+
+	for (i = 0; i < stream->num_ports; i++)
+		slim_disconnect_port(stream, &stream->ports[i]);
+
+	kfree(stream->ports);
+	stream->ports = NULL;
+	stream->num_ports = 0;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(slim_stream_unprepare);
+
+/*
+ * slim_stream_free() - Free a SLIMbus Stream
+ *
+ * @stream: instance of slim stream runtime to free
+ *
+ * This API will un allocate all the memory associated with
+ * slim stream runtime, user is not allowed to make an dereference
+ * to stream after this call.
+ *
+ * Return: zero on success and error code on failure. From ASoC DPCM framework,
+ * this state is linked to shutdown() operation.
+ */
+int slim_stream_free(struct slim_stream_runtime *stream)
+{
+	struct slim_device *sdev = stream->dev;
+
+	spin_lock(&sdev->stream_list_lock);
+	list_del(&stream->node);
+	spin_unlock(&sdev->stream_list_lock);
+
+	kfree(stream->name);
+	kfree(stream);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(slim_stream_free);