V4L/DVB (8123): Add support for em2860 based PointNix Intra-Oral Camera
em28xx-cards.c
em28xx-input.c
em28xx-video.c
em28xx.h
- Add support for the PointNix Intra-Oral Camera, which required addition of
a construct for reading the "snapshot" button (provided on the em2860 and
em2880 chips, but this is the first case where I have seen it actually used
in a product). The button is wired to pin 56 on the em2880.
http://www.pointnix.com/ENG/dental/product_02.asp
Thanks to Roberto Mantovani <rmantovani@libero.it> for testing the changes
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index bb58071..eab3d95 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -30,6 +30,10 @@
#include "em28xx.h"
+#define EM28XX_SNAPSHOT_KEY KEY_CAMERA
+#define EM28XX_SBUTTON_QUERY_INTERVAL 500
+#define EM28XX_R0C_USBSUSP_SNAPSHOT 0x20
+
static unsigned int ir_debug;
module_param(ir_debug, int, 0644);
MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
@@ -124,6 +128,89 @@
return 1;
}
+static void em28xx_query_sbutton(struct work_struct *work)
+{
+ /* Poll the register and see if the button is depressed */
+ struct em28xx *dev =
+ container_of(work, struct em28xx, sbutton_query_work.work);
+ int ret;
+
+ ret = em28xx_read_reg(dev, EM28XX_R0C_USBSUSP);
+
+ if (ret & EM28XX_R0C_USBSUSP_SNAPSHOT) {
+ u8 cleared;
+ /* Button is depressed, clear the register */
+ cleared = ((u8) ret) & ~EM28XX_R0C_USBSUSP_SNAPSHOT;
+ em28xx_write_regs(dev, EM28XX_R0C_USBSUSP, &cleared, 1);
+
+ /* Not emulate the keypress */
+ input_report_key(dev->sbutton_input_dev, EM28XX_SNAPSHOT_KEY,
+ 1);
+ /* Now unpress the key */
+ input_report_key(dev->sbutton_input_dev, EM28XX_SNAPSHOT_KEY,
+ 0);
+ }
+
+ /* Schedule next poll */
+ schedule_delayed_work(&dev->sbutton_query_work,
+ msecs_to_jiffies(EM28XX_SBUTTON_QUERY_INTERVAL));
+}
+
+void em28xx_register_snapshot_button(struct em28xx *dev)
+{
+ struct input_dev *input_dev;
+ int err;
+
+ em28xx_info("Registering snapshot button...\n");
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ em28xx_errdev("input_allocate_device failed\n");
+ return;
+ }
+
+ usb_make_path(dev->udev, dev->snapshot_button_path,
+ sizeof(dev->snapshot_button_path));
+ strlcat(dev->snapshot_button_path, "/sbutton",
+ sizeof(dev->snapshot_button_path));
+ INIT_DELAYED_WORK(&dev->sbutton_query_work, em28xx_query_sbutton);
+
+ input_dev->name = "em28xx snapshot button";
+ input_dev->phys = dev->snapshot_button_path;
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+ set_bit(EM28XX_SNAPSHOT_KEY, input_dev->keybit);
+ input_dev->keycodesize = 0;
+ input_dev->keycodemax = 0;
+ input_dev->id.bustype = BUS_USB;
+ input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
+ input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+ input_dev->id.version = 1;
+ input_dev->dev.parent = &dev->udev->dev;
+
+ err = input_register_device(input_dev);
+ if (err) {
+ em28xx_errdev("input_register_device failed\n");
+ input_free_device(input_dev);
+ return;
+ }
+
+ dev->sbutton_input_dev = input_dev;
+ schedule_delayed_work(&dev->sbutton_query_work,
+ msecs_to_jiffies(EM28XX_SBUTTON_QUERY_INTERVAL));
+ return;
+
+}
+
+void em28xx_deregister_snapshot_button(struct em28xx *dev)
+{
+ if (dev->sbutton_input_dev != NULL) {
+ em28xx_info("Deregistering snapshot button\n");
+ cancel_rearming_delayed_work(&dev->sbutton_query_work);
+ input_unregister_device(dev->sbutton_input_dev);
+ dev->sbutton_input_dev = NULL;
+ }
+ return;
+}
+
/* ----------------------------------------------------------------------
* Local variables:
* c-basic-offset: 8