Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM 64-bit DT updates from Arnd Bergmann:
"Device-tree updates for arm64 platforms. For the first time I can
remember, this is actually larger than the corresponding branch for
32-bit platforms overall, though that has more individual changes.
A significant portion this time is due to added machine support:
- Initial support for the Realtek RTD1295 SoC, along with the Zidoo
X9S set-top-box
- Initial support for Actions Semi S900 and the Bubblegum-96
single-board-cёmputer.
- Rockchips support for the rk3399-Firefly single-board-computer gets
added, this one stands out for being relatively fast, affordable
and well₋supported, compared to many boards that only fall into one
or two of the above categories.
- Mediatek gains support for the mt6797 mobile-phone SoC platform and
corresponding evaluation board.
- Amlogic board support gets added for the NanoPi K2 and S905x
LibreTech CC single-board computers and the R-Box Pro set-top-box
- Allwinner board support gets added for the OrangePi Win, Orangepi
Zero Plus 2, NanoPi NEO2 and Orange Pi Prime single board computers
and the SoPine system-on-module.
- Renesas board support for Salvator-XS and H3ULCB automotive
development systems.
- Socionext Uniphier board support for LD11-global and LD20-global,
whatever those may be.
- Broadcom adds support for the new Stingray communication processor
in its iProc family, along with two reference boards.
Other updates include:
- For the hisicon platform, support for Hi3660-Hikey960 gets extended
significantly.
- Lots of smaller updates for Renesas, Amlogic, Rockchip, UniPhier,
Broadcom, Allwinner, Hisilicon, Qualcomm, Marvell, and NXP"
* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (243 commits)
ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers
Revert "arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k"
arm64: dts: mediatek: don't include missing file
ARM64: dts: meson-gxl: Add Libre Technology CC support
dt-bindings: arm: amlogic: Add Libre Technology CC board
dt-bindings: add Libre Technology vendor prefix
arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K
arm64: dts: zte: Use - instead of @ for DT OPP entries
arm64: dts: marvell: add gpio support for Armada 7K/8K
arm64: dts: marvell: add pinctrl support for Armada 7K/8K
arm64: dts: marvell: use new binding for the system controller on cp110
arm64: dts: marvell: remove *-clock-output-names on cp110
arm64: dts: marvell: use new bindings for xor clocks on ap806
arm64: dts: marvell: mcbin: enable the mdio node
arm64: dts: Add Actions Semi S900 and Bubblegum-96
dt-bindings: Add vendor prefix for uCRobotics
arm64: dts: marvell: add xmdio nodes for 7k/8k
arm64: dts: marvell: add a comment on the cp110 slave node status
arm64: dts: marvell: remove cpm crypto nodes from dts files
arm64: dts: marvell: cp110: enable the crypto engine at the SoC level
...
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index bfd5b55..0fff40a 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -29,26 +29,35 @@
Required root node property:
compatible: "amlogic,s912", "amlogic,meson-gxm";
-Board compatible values:
+Board compatible values (alphabetically, grouped by SoC):
+
- "geniatech,atv1200" (Meson6)
+
- "minix,neo-x8" (Meson8)
- - "tronfy,mxq" (Meson8b)
+
- "hardkernel,odroid-c1" (Meson8b)
+ - "tronfy,mxq" (Meson8b)
+
+ - "amlogic,p200" (Meson gxbb)
+ - "amlogic,p201" (Meson gxbb)
+ - "friendlyarm,nanopi-k2" (Meson gxbb)
+ - "hardkernel,odroid-c2" (Meson gxbb)
+ - "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
- "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb)
- "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb)
- "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb)
- - "hardkernel,odroid-c2" (Meson gxbb)
- - "amlogic,p200" (Meson gxbb)
- - "amlogic,p201" (Meson gxbb)
- "wetek,hub" (Meson gxbb)
- "wetek,play2" (Meson gxbb)
+
- "amlogic,p212" (Meson gxl s905x)
+ - "hwacom,amazetv" (Meson gxl s905x)
- "khadas,vim" (Meson gxl s905x)
+ - "libretech,cc" (Meson gxl s905x)
- "amlogic,p230" (Meson gxl s905d)
- "amlogic,p231" (Meson gxl s905d)
- - "hwacom,amazetv" (Meson gxl s905x)
+
- "amlogic,q200" (Meson gxm s912)
- "amlogic,q201" (Meson gxm s912)
- - "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
+ - "kingnovel,r-box-pro" (Meson gxm S912)
- "nexbox,a1" (Meson gxm s912)
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt
new file mode 100644
index 0000000..23a0217
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt
@@ -0,0 +1,12 @@
+Broadcom Stingray device tree bindings
+------------------------------------------------
+
+Boards with Stingray shall have the following properties:
+
+Required root node property:
+
+Stingray Combo SVK board
+compatible = "brcm,bcm958742k", "brcm,stingray";
+
+Stingray SST100 board
+compatible = "brcm,bcm958742t", "brcm,stingray";
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index 2e73215..7111fbc8 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -4,6 +4,10 @@
Required root node properties:
- compatible = "hisilicon,hi3660";
+HiKey960 Board
+Required root node properties:
+ - compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
+
Hi3798cv200 SoC
Required root node properties:
- compatible = "hisilicon,hi3798cv200";
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index c860b24..da7bd13 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -12,6 +12,8 @@
"mediatek,mt6592"
"mediatek,mt6755"
"mediatek,mt6795"
+ "mediatek,mt6797"
+ "mediatek,mt7622"
"mediatek,mt7623"
"mediatek,mt8127"
"mediatek,mt8135"
@@ -38,6 +40,12 @@
- Evaluation board for MT6795(Helio X10):
Required root node properties:
- compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
+- Evaluation board for MT6797(Helio X20):
+ Required root node properties:
+ - compatible = "mediatek,mt6797-evb", "mediatek,mt6797";
+- Reference board variant 1 for MT7622:
+ Required root node properties:
+ - compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
- Evaluation board for MT7623:
Required root node properties:
- compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
diff --git a/Documentation/devicetree/bindings/arm/realtek.txt b/Documentation/devicetree/bindings/arm/realtek.txt
new file mode 100644
index 0000000..13d7557
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/realtek.txt
@@ -0,0 +1,20 @@
+Realtek platforms device tree bindings
+--------------------------------------
+
+
+RTD1295 SoC
+===========
+
+Required root node properties:
+
+ - compatible : must contain "realtek,rtd1295"
+
+
+Root node property compatible must contain, depending on board:
+
+ - Zidoo X9S: "zidoo,x9s"
+
+
+Example:
+
+ compatible = "zidoo,x9s", "realtek,rtd1295";
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 7b48474..11c0ac4 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -42,6 +42,10 @@
Required root node properties:
- compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288";
+- Firefly Firefly-RK3399 board:
+ Required root node properties:
+ - compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
+
- ChipSPARK PopMetal-RK3288 board:
Required root node properties:
- compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
diff --git a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
index fc33ca0..7c3ca0e 100644
--- a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
@@ -3,7 +3,7 @@
Required properties:
- reg: Physical base address and size of the controller's register area.
- compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where
- chip could be ls1021a, ls1043a, ls1046a, ls2080a etc.
+ chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a etc.
- clocks: Input clock specifier. Refer to common clock bindings.
- interrupts: Interrupt specifier. Refer to interrupt binding.
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
index 6f66e9a..f2c5f0e4a 100644
--- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
@@ -219,3 +219,79 @@
--------
PLL and leaf clock compatible strings for BCM63138 are:
"brcm,bcm63138-armpll"
+
+Stingray
+-----------
+PLL and leaf clock compatible strings for Stingray are:
+ "brcm,sr-genpll0"
+ "brcm,sr-genpll1"
+ "brcm,sr-genpll2"
+ "brcm,sr-genpll3"
+ "brcm,sr-genpll4"
+ "brcm,sr-genpll5"
+ "brcm,sr-genpll6"
+
+ "brcm,sr-lcpll0"
+ "brcm,sr-lcpll1"
+ "brcm,sr-lcpll-pcie"
+
+
+The following table defines the set of PLL/clock index and ID for Stingray.
+These clock IDs are defined in:
+ "include/dt-bindings/clock/bcm-sr.h"
+
+ Clock Source Index ID
+ --- ----- ----- ---------
+ crystal N/A N/A N/A
+ crmu_ref25m crystal N/A N/A
+
+ genpll0 crystal 0 BCM_SR_GENPLL0
+ clk_125m genpll0 1 BCM_SR_GENPLL0_125M_CLK
+ clk_scr genpll0 2 BCM_SR_GENPLL0_SCR_CLK
+ clk_250 genpll0 3 BCM_SR_GENPLL0_250M_CLK
+ clk_pcie_axi genpll0 4 BCM_SR_GENPLL0_PCIE_AXI_CLK
+ clk_paxc_axi_x2 genpll0 5 BCM_SR_GENPLL0_PAXC_AXI_X2_CLK
+ clk_paxc_axi genpll0 6 BCM_SR_GENPLL0_PAXC_AXI_CLK
+
+ genpll1 crystal 0 BCM_SR_GENPLL1
+ clk_pcie_tl genpll1 1 BCM_SR_GENPLL1_PCIE_TL_CLK
+ clk_mhb_apb genpll1 2 BCM_SR_GENPLL1_MHB_APB_CLK
+
+ genpll2 crystal 0 BCM_SR_GENPLL2
+ clk_nic genpll2 1 BCM_SR_GENPLL2_NIC_CLK
+ clk_ts_500_ref genpll2 2 BCM_SR_GENPLL2_TS_500_REF_CLK
+ clk_125_nitro genpll2 3 BCM_SR_GENPLL2_125_NITRO_CLK
+ clk_chimp genpll2 4 BCM_SR_GENPLL2_CHIMP_CLK
+ clk_nic_flash genpll2 5 BCM_SR_GENPLL2_NIC_FLASH
+
+ genpll3 crystal 0 BCM_SR_GENPLL3
+ clk_hsls genpll3 1 BCM_SR_GENPLL3_HSLS_CLK
+ clk_sdio genpll3 2 BCM_SR_GENPLL3_SDIO_CLK
+
+ genpll4 crystal 0 BCM_SR_GENPLL4
+ ccn genpll4 1 BCM_SR_GENPLL4_CCN_CLK
+ clk_tpiu_pll genpll4 2 BCM_SR_GENPLL4_TPIU_PLL_CLK
+ noc_clk genpll4 3 BCM_SR_GENPLL4_NOC_CLK
+ clk_chclk_fs4 genpll4 4 BCM_SR_GENPLL4_CHCLK_FS4_CLK
+ clk_bridge_fscpu genpll4 5 BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK
+
+
+ genpll5 crystal 0 BCM_SR_GENPLL5
+ fs4_hf_clk genpll5 1 BCM_SR_GENPLL5_FS4_HF_CLK
+ crypto_ae_clk genpll5 2 BCM_SR_GENPLL5_CRYPTO_AE_CLK
+ raid_ae_clk genpll5 3 BCM_SR_GENPLL5_RAID_AE_CLK
+
+ genpll6 crystal 0 BCM_SR_GENPLL6
+ 48_usb genpll6 1 BCM_SR_GENPLL6_48_USB_CLK
+
+ lcpll0 crystal 0 BCM_SR_LCPLL0
+ clk_sata_refp lcpll0 1 BCM_SR_LCPLL0_SATA_REFP_CLK
+ clk_sata_refn lcpll0 2 BCM_SR_LCPLL0_SATA_REFN_CLK
+ clk_usb_ref lcpll0 3 BCM_SR_LCPLL0_USB_REF_CLK
+ sata_refpn lcpll0 3 BCM_SR_LCPLL0_SATA_REFPN_CLK
+
+ lcpll1 crystal 0 BCM_SR_LCPLL1
+ wan lcpll1 1 BCM_SR_LCPLL0_WAN_CLK
+
+ lcpll_pcie crystal 0 BCM_SR_LCPLL_PCIE
+ pcie_phy_ref lcpll1 1 BCM_SR_LCPLL_PCIE_PHY_REF_CLK
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
similarity index 77%
rename from Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
rename to Documentation/devicetree/bindings/i2c/i2c-mtk.txt
index 0ce6fa3..bd5a7be 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
@@ -4,11 +4,11 @@
Required properties:
- compatible: value should be either of the following.
- (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c.
- (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c.
- (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c.
- (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c.
- (e) "mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c.
+ "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for Mediatek mt2701
+ "mediatek,mt6577-i2c": for i2c compatible with mt6577.
+ "mediatek,mt6589-i2c": for i2c compatible with mt6589.
+ "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for i2c compatible with mt7623.
+ "mediatek,mt8173-i2c": for i2c compatible with mt8173.
- reg: physical base address of the controller and dma base, length of memory
mapped region.
- interrupts: interrupt number to the cpu.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
index a89c03b..11cc87a 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
@@ -1,21 +1,23 @@
-+Mediatek 65xx/67xx/81xx sysirq
++Mediatek MT65xx/MT67xx/MT81xx sysirq
Mediatek SOCs sysirq support controllable irq inverter for each GIC SPI
interrupt.
Required properties:
-- compatible: should be one of:
- "mediatek,mt8173-sysirq"
- "mediatek,mt8135-sysirq"
- "mediatek,mt8127-sysirq"
- "mediatek,mt6795-sysirq"
- "mediatek,mt6755-sysirq"
- "mediatek,mt6592-sysirq"
- "mediatek,mt6589-sysirq"
- "mediatek,mt6582-sysirq"
- "mediatek,mt6580-sysirq"
- "mediatek,mt6577-sysirq"
- "mediatek,mt2701-sysirq"
+- compatible: should be
+ "mediatek,mt8173-sysirq", "mediatek,mt6577-sysirq": for MT8173
+ "mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135
+ "mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127
+ "mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622
+ "mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795
+ "mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797
+ "mediatek,mt6755-sysirq", "mediatek,mt6577-sysirq": for MT6755
+ "mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq": for MT6592
+ "mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq": for MT6589
+ "mediatek,mt6582-sysirq", "mediatek,mt6577-sysirq": for MT6582
+ "mediatek,mt6580-sysirq", "mediatek,mt6577-sysirq": for MT6580
+ "mediatek,mt6577-sysirq": for MT6577
+ "mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq": for MT2701
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
- interrupt-parent: phandle of irq parent for sysirq. The parent must
diff --git a/Documentation/devicetree/bindings/mfd/hi6421.txt b/Documentation/devicetree/bindings/mfd/hi6421.txt
index 0d5a446..22da96d 100644
--- a/Documentation/devicetree/bindings/mfd/hi6421.txt
+++ b/Documentation/devicetree/bindings/mfd/hi6421.txt
@@ -1,7 +1,9 @@
* HI6421 Multi-Functional Device (MFD), by HiSilicon Ltd.
Required parent device properties:
-- compatible : contains "hisilicon,hi6421-pmic";
+- compatible : One of the following chip-specific strings:
+ "hisilicon,hi6421-pmic";
+ "hisilicon,hi6421v530-pmic";
- reg : register range space of hi6421;
Supported Hi6421 sub-devices include:
diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
index dedfb02..a2cf5e1 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
@@ -7,6 +7,20 @@
by mmc.txt and the properties used by the sdhci-esdhc driver.
Required properties:
+ - compatible : should be "fsl,esdhc", or "fsl,<chip>-esdhc".
+ Possible compatibles for PowerPC:
+ "fsl,mpc8536-esdhc"
+ "fsl,mpc8378-esdhc"
+ "fsl,p2020-esdhc"
+ "fsl,p4080-esdhc"
+ "fsl,t1040-esdhc"
+ "fsl,t4240-esdhc"
+ Possible compatibles for ARM:
+ "fsl,ls1012a-esdhc"
+ "fsl,ls1088a-esdhc"
+ "fsl,ls1043a-esdhc"
+ "fsl,ls1046a-esdhc"
+ "fsl,ls2080a-esdhc"
- interrupt-parent : interrupt source phandle.
- clock-frequency : specifies eSDHC base clock frequency.
diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
index df37058..8af1afc 100644
--- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
@@ -12,6 +12,7 @@
Required Properties:
* compatible: should be one of the following.
+ - "hisilicon,hi3660-dw-mshc": for controllers with hi3660 specific extensions.
- "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extensions.
- "hisilicon,hi6220-dw-mshc": for controllers with hi6220 specific extensions.
diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
new file mode 100644
index 0000000..68ffa0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
@@ -0,0 +1,50 @@
+HiSilicon Kirin SoCs PCIe host DT description
+
+Kirin PCIe host controller is based on Designware PCI core.
+It shares common functions with PCIe Designware core driver
+and inherits common properties defined in
+Documentation/devicetree/bindings/pci/designware-pci.txt.
+
+Additional properties are described here:
+
+Required properties
+- compatible:
+ "hisilicon,kirin960-pcie" for PCIe of Kirin960 SoC
+- reg: Should contain rc_dbi, apb, phy, config registers location and length.
+- reg-names: Must include the following entries:
+ "dbi": controller configuration registers;
+ "apb": apb Ctrl register defined by Kirin;
+ "phy": apb PHY register defined by Kirin;
+ "config": PCIe configuration space registers.
+- reset-gpios: The gpio to generate PCIe perst assert and deassert signal.
+
+Optional properties:
+
+Example based on kirin960:
+
+ pcie@f4000000 {
+ compatible = "hisilicon,kirin-pcie";
+ reg = <0x0 0xf4000000 0x0 0x1000>, <0x0 0xff3fe000 0x0 0x1000>,
+ <0x0 0xf3f20000 0x0 0x40000>, <0x0 0xF4000000 0 0x2000>;
+ reg-names = "dbi","apb","phy", "config";
+ bus-range = <0x0 0x1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0x00000000 0x0 0xf5000000 0x0 0x2000000>;
+ num-lanes = <1>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0x0 0 0 1 &gic 0 0 0 282 4>,
+ <0x0 0 0 2 &gic 0 0 0 283 4>,
+ <0x0 0 0 3 &gic 0 0 0 284 4>,
+ <0x0 0 0 4 &gic 0 0 0 285 4>;
+ clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+ <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+ <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+ <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+ <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+ clock-names = "pcie_phy_ref", "pcie_aux",
+ "pcie_apb_phy", "pcie_apb_sys", "pcie_aclk";
+ reset-gpios = <&gpio11 1 0 >;
+ };
diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
index 0015c72..b6cf384 100644
--- a/Documentation/devicetree/bindings/serial/mtk-uart.txt
+++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt
@@ -8,6 +8,8 @@
* "mediatek,mt6589-uart" for MT6589 compatible UARTS
* "mediatek,mt6755-uart" for MT6755 compatible UARTS
* "mediatek,mt6795-uart" for MT6795 compatible UARTS
+ * "mediatek,mt6797-uart" for MT6797 compatible UARTS
+ * "mediatek,mt7622-uart" for MT7622 compatible UARTS
* "mediatek,mt7623-uart" for MT7623 compatible UARTS
* "mediatek,mt8127-uart" for MT8127 compatible UARTS
* "mediatek,mt8135-uart" for MT8135 compatible UARTS
diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
index 16fe94d..b1d165b 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
@@ -9,11 +9,14 @@
The driver implements the Generic PM domain bindings described in
power/power_domain.txt. It provides the power domains defined in
-include/dt-bindings/power/mt8173-power.h and mt2701-power.h.
+- include/dt-bindings/power/mt8173-power.h
+- include/dt-bindings/power/mt6797-power.h
+- include/dt-bindings/power/mt2701-power.h
Required properties:
- compatible: Should be one of:
- "mediatek,mt2701-scpsys"
+ - "mediatek,mt6797-scpsys"
- "mediatek,mt8173-scpsys"
- #power-domain-cells: Must be 1
- reg: Address range of the SCPSYS unit
@@ -22,6 +25,7 @@
These are clocks which hardware needs to be
enabled before enabling certain power domains.
Required clocks for MT2701: "mm", "mfg", "ethif"
+ Required clocks for MT6797: "mm", "mfg", "vdec"
Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt"
Optional properties:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index aa27db6..286f4e1 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -166,6 +166,7 @@
keymile Keymile GmbH
khadas Khadas
kinetic Kinetic Technologies
+kingnovel Kingnovel Technology Co., Ltd.
kosagi Sutajio Ko-Usagi PTE Ltd.
kyo Kyocera Corporation
lacie LaCie
@@ -173,6 +174,7 @@
lego LEGO Systems A/S
lenovo Lenovo Group Ltd.
lg LG Corporation
+libretech Shenzhen Libre Technology Co., Ltd
licheepi Lichee Pi
linaro Linaro Limited
linux Linux-specific binding
@@ -332,6 +334,7 @@
tronsmart Tronsmart
truly Truly Semiconductors Limited
tyan Tyan Computer Corporation
+ucrobotics uCRobotics
udoo Udoo
uniwest United Western Technologies Corp (UniWest)
upisemi uPI Semiconductor Corp.
@@ -357,6 +360,7 @@
xunlong Shenzhen Xunlong Software CO.,Limited
zarlink Zarlink Semiconductor
zeitec ZEITEC Semiconductor Co., LTD.
+zidoo Shenzhen Zidoo Technology Co., Ltd.
zii Zodiac Inflight Innovations
zte ZTE Corp.
zyxel ZyXEL Communications Corp.
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 080232b..8e19512 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -1,3 +1,4 @@
+dts-dirs += actions
dts-dirs += al
dts-dirs += allwinner
dts-dirs += altera
@@ -14,6 +15,7 @@
dts-dirs += mediatek
dts-dirs += nvidia
dts-dirs += qcom
+dts-dirs += realtek
dts-dirs += renesas
dts-dirs += rockchip
dts-dirs += socionext
diff --git a/arch/arm64/boot/dts/actions/Makefile b/arch/arm64/boot/dts/actions/Makefile
new file mode 100644
index 0000000..62922d6
--- /dev/null
+++ b/arch/arm64/boot/dts/actions/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_ACTIONS) += s900-bubblegum-96.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
new file mode 100644
index 0000000..a0c3484
--- /dev/null
+++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "s900.dtsi"
+
+/ {
+ compatible = "ucrobotics,bubblegum-96", "actions,s900";
+ model = "Bubblegum-96";
+
+ aliases {
+ serial5 = &uart5;
+ };
+
+ chosen {
+ stdout-path = "serial5:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+};
+
+&timer {
+ clocks = <&hosc>;
+};
+
+&uart5 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/actions/s900.dtsi b/arch/arm64/boot/dts/actions/s900.dtsi
new file mode 100644
index 0000000..11406f6
--- /dev/null
+++ b/arch/arm64/boot/dts/actions/s900.dtsi
@@ -0,0 +1,164 @@
+/*
+ * Copyright (c) 2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "actions,s900";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ secmon@1f000000 {
+ reg = <0x0 0x1f000000 0x0 0x1000000>;
+ no-map;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ hosc: hosc {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller@e00f1000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xe00f1000 0x0 0x1000>,
+ <0x0 0xe00f2000 0x0 0x2000>,
+ <0x0 0xe00f4000 0x0 0x2000>,
+ <0x0 0xe00f6000 0x0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ uart0: serial@e0120000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe0120000 0x0 0x2000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart1: serial@e0122000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe0122000 0x0 0x2000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart2: serial@e0124000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe0124000 0x0 0x2000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart3: serial@e0126000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe0126000 0x0 0x2000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart4: serial@e0128000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe0128000 0x0 0x2000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart5: serial@e012a000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe012a000 0x0 0x2000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart6: serial@e012c000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe012c000 0x0 0x2000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer: timer@e0228000 {
+ compatible = "actions,s900-timer";
+ reg = <0x0 0xe0228000 0x0 0x8000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "timer1";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 244e8b7..108f12c 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -1,6 +1,11 @@
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 6872135..0d1f026 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -67,6 +67,14 @@
};
};
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ status = "okay";
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
@@ -77,6 +85,13 @@
bias-pull-up;
};
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
new file mode 100644
index 0000000..5f8ff401
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "OrangePi Win/Win Plus";
+ compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
index 790d14d..24f1aac 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
@@ -46,5 +46,20 @@
model = "Pine64+";
compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
- /* TODO: Camera, Ethernet PHY, touchscreen, etc. */
+ /* TODO: Camera, touchscreen, etc. */
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ status = "okay";
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index c680ed3..08cda24 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -52,6 +52,10 @@
aliases {
serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
};
chosen {
@@ -66,10 +70,23 @@
};
};
+&ehci0 {
+ status = "okay";
+};
+
&ehci1 {
status = "okay";
};
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rmii_pins>;
+ phy-mode = "rmii";
+ phy-handle = <&ext_rmii_phy1>;
+ status = "okay";
+
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
@@ -80,6 +97,13 @@
bias-pull-up;
};
+&mdio {
+ ext_rmii_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
@@ -91,16 +115,49 @@
status = "okay";
};
+&ohci0 {
+ status = "okay";
+};
+
&ohci1 {
status = "okay";
};
+/* On Exp and Euler connectors */
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
+/* On Wifi/BT connector, with RTS/CTS */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ status = "disabled";
+};
+
+/* On Pi-2 connector */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "disabled";
+};
+
+/* On Euler connector */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ status = "disabled";
+};
+
+/* On Euler connector, RTS/CTS optional */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+ status = "disabled";
+};
+
&usb_otg {
dr_mode = "host";
status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
new file mode 100644
index 0000000..17eb1cc
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -0,0 +1,126 @@
+/*
+ * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun50i-a64-pine64.dts, which is:
+ * Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64-sopine.dtsi"
+
+/ {
+ model = "SoPine with baseboard";
+ compatible = "pine64,sopine-baseboard", "pine64,sopine",
+ "allwinner,sun50i-a64";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_vcc1v8: vcc1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ status = "okay";
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc1v8>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
new file mode 100644
index 0000000..475518b
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun50i-a64-pine64.dts, which is:
+ * Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun50i-a64.dtsi"
+
+/ {
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ non-removable;
+ disable-wp;
+ bus-width = <4>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 166c9ef..9d00622 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -43,6 +43,7 @@
*/
#include <dt-bindings/clock/sun50i-a64-ccu.h>
+#include <dt-bindings/clock/sun8i-r-ccu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/sun50i-a64-ccu.h>
@@ -129,6 +130,12 @@
#size-cells = <1>;
ranges;
+ syscon: syscon@1c00000 {
+ compatible = "allwinner,sun50i-a64-system-controller",
+ "syscon";
+ reg = <0x01c00000 0x1000>;
+ };
+
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun50i-a64-mmc";
reg = <0x01c0f000 0x1000>;
@@ -204,6 +211,28 @@
#phy-cells = <1>;
};
+ ehci0: usb@01c1a000 {
+ compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
+ reg = <0x01c1a000 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI0>,
+ <&ccu CLK_BUS_EHCI0>,
+ <&ccu CLK_USB_OHCI0>;
+ resets = <&ccu RST_BUS_OHCI0>,
+ <&ccu RST_BUS_EHCI0>;
+ status = "disabled";
+ };
+
+ ohci0: usb@01c1a400 {
+ compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
+ reg = <0x01c1a400 0x100>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI0>,
+ <&ccu CLK_USB_OHCI0>;
+ resets = <&ccu RST_BUS_OHCI0>;
+ status = "disabled";
+ };
+
ehci1: usb@01c1b000 {
compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
reg = <0x01c1b000 0x100>;
@@ -281,6 +310,21 @@
bias-pull-up;
};
+ rmii_pins: rmii_pins {
+ pins = "PD10", "PD11", "PD13", "PD14", "PD17",
+ "PD18", "PD19", "PD20", "PD22", "PD23";
+ function = "emac";
+ drive-strength = <40>;
+ };
+
+ rgmii_pins: rgmii_pins {
+ pins = "PD8", "PD9", "PD10", "PD11", "PD12",
+ "PD13", "PD15", "PD16", "PD17", "PD18",
+ "PD19", "PD20", "PD21", "PD22", "PD23";
+ function = "emac";
+ drive-strength = <40>;
+ };
+
uart0_pins_a: uart0@0 {
pins = "PB8", "PB9";
function = "uart0";
@@ -295,6 +339,26 @@
pins = "PG8", "PG9";
function = "uart1";
};
+
+ uart2_pins: uart2-pins {
+ pins = "PB0", "PB1";
+ function = "uart2";
+ };
+
+ uart3_pins: uart3-pins {
+ pins = "PD0", "PD1";
+ function = "uart3";
+ };
+
+ uart4_pins: uart4-pins {
+ pins = "PD2", "PD3";
+ function = "uart4";
+ };
+
+ uart4_rts_cts_pins: uart4-rts-cts-pins {
+ pins = "PD4", "PD5";
+ function = "uart4";
+ };
};
uart0: serial@1c28000 {
@@ -303,8 +367,8 @@
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 67>;
- resets = <&ccu 46>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
@@ -314,8 +378,8 @@
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 68>;
- resets = <&ccu 47>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
@@ -325,8 +389,8 @@
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 69>;
- resets = <&ccu 48>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
status = "disabled";
};
@@ -336,8 +400,8 @@
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 70>;
- resets = <&ccu 49>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
status = "disabled";
};
@@ -347,8 +411,8 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 71>;
- resets = <&ccu 50>;
+ clocks = <&ccu CLK_BUS_UART4>;
+ resets = <&ccu RST_BUS_UART4>;
status = "disabled";
};
@@ -356,8 +420,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu 63>;
- resets = <&ccu 42>;
+ clocks = <&ccu CLK_BUS_I2C0>;
+ resets = <&ccu RST_BUS_I2C0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -367,8 +431,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu 64>;
- resets = <&ccu 43>;
+ clocks = <&ccu CLK_BUS_I2C1>;
+ resets = <&ccu RST_BUS_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -378,13 +442,33 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu 65>;
- resets = <&ccu 44>;
+ clocks = <&ccu CLK_BUS_I2C2>;
+ resets = <&ccu RST_BUS_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
+ emac: ethernet@1c30000 {
+ compatible = "allwinner,sun50i-a64-emac";
+ syscon = <&syscon>;
+ reg = <0x01c30000 0x100>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ resets = <&ccu RST_BUS_EMAC>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu CLK_BUS_EMAC>;
+ clock-names = "stmmaceth";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
@@ -417,12 +501,31 @@
compatible = "allwinner,sun50i-a64-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
+ clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
+
+ r_rsb_pins: rsb@0 {
+ pins = "PL0", "PL1";
+ function = "s_rsb";
+ };
+ };
+
+ r_rsb: rsb@1f03400 {
+ compatible = "allwinner,sun8i-a23-rsb";
+ reg = <0x01f03400 0x400>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu 6>;
+ clock-frequency = <3000000>;
+ resets = <&r_ccu 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_rsb_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
};
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
new file mode 100644
index 0000000..9689087
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
@@ -0,0 +1,161 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "FriendlyARM NanoPi NEO 2";
+ compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pwr {
+ label = "nanopi:green:pwr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ status {
+ label = "nanopi:blue:status";
+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_usb0_vbus: usb0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+ status = "okay";
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <®_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@7 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ /* USB Type-A port's VBUS is always on */
+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index dfecc17..a8296fe 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -59,6 +59,7 @@
};
aliases {
+ ethernet0 = &emac;
serial0 = &uart0;
};
@@ -91,6 +92,16 @@
};
};
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ };
+
reg_usb0_vbus: usb0-vbus {
compatible = "regulator-fixed";
regulator-name = "usb0-vbus";
@@ -126,12 +137,28 @@
status = "okay";
};
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <®_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
new file mode 100644
index 0000000..d906b30
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
@@ -0,0 +1,232 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun50i-h5-orangepi-pc2.dts, which is:
+ * Copyright (C) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Xunlong Orange Pi Prime";
+ compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pwr {
+ label = "orangepi:green:pwr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ status {
+ label = "orangepi:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ r-gpio-keys {
+ compatible = "gpio-keys";
+
+ sw4 {
+ label = "sw4";
+ linux,code = <BTN_0>;
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_usb0_vbus: usb0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+ status = "okay";
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */
+ };
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <®_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_a>;
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "disabled";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ /* USB Type-A ports' VBUS is always on */
+ usb0_id_det-gpios = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
new file mode 100644
index 0000000..b6b7a56
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "OrangePi Zero Plus2";
+ compatible = "xunlong,orangepi-zero-plus2", "allwinner,sun50i-h5";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index b9ad2db..7a9f48c 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -1,3 +1,4 @@
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p200.dtb
@@ -7,15 +8,17 @@
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index a84e276..dc478d0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -121,19 +121,42 @@
};
};
-/* This UART is brought out to the DB9 connector */
-&uart_AO {
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+ðmac {
status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
};
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
/* Wireless SDIO Module */
&sd_emmc_a {
status = "okay";
@@ -154,7 +177,7 @@
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
- brcmf: bcrmf@1 {
+ brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
@@ -198,32 +221,9 @@
vqmmc-supply = <&vddio_boot>;
};
-&pwm_ef {
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "clkin0";
-};
-
-ðmac {
- status = "okay";
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
- pinctrl-names = "default";
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 436b875..35b8c88 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -200,7 +200,7 @@
};
scpi_sensors: sensors {
- compatible = "arm,scpi-sensors";
+ compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
#thermal-sensor-cells = <1>;
};
};
@@ -304,6 +304,15 @@
status = "disabled";
};
+ spicc: spi@8d80 {
+ compatible = "amlogic,meson-gx-spicc";
+ reg = <0x0 0x08d80 0x0 0x80>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spifc: spi@8c80 {
compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc";
reg = <0x0 0x08c80 0x0 0x80>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
new file mode 100644
index 0000000..fa46283
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -0,0 +1,291 @@
+/*
+ * Copyright (c) 2017 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ stat {
+ label = "nanopi-k2:blue:stat";
+ gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ panic-indicator;
+ };
+ };
+
+ vdd_5v: regulator-vdd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vddio_ao18: regulator-vddio-ao18 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddio_ao3v3: regulator-vddio-ao3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vddio_tf: regulator-vddio-tf {
+ compatible = "regulator-gpio";
+
+ regulator-name = "VDDIO_TF";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+
+ states = <3300000 0>,
+ <1800000 1>;
+ };
+
+ wifi_32k: wifi-32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi_32k>;
+ clock-names = "ext_clock";
+ };
+
+ vcc1v8: regulator-vcc1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc3v3: regulator-vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+};
+
+ðmac {
+ status = "okay";
+ pinctrl-0 = <ð_rgmii_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <ð_phy0>;
+ phy-mode = "rgmii";
+
+ amlogic,tx-delay-ns = <2>;
+
+ snps,reset-gpio = <&gpio GPIOZ_14 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ };
+ };
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao18>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+ status = "okay";
+ pinctrl-0 = <&sdio_pins>, <&sdio_irq_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <200000000>;
+
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddio_ao3v3>;
+ vqmmc-supply = <&vddio_ao18>;
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ };
+};
+
+/* SD */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&vddio_ao3v3>;
+ vqmmc-supply = <&vddio_tf>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "disabled";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc3v3>;
+ vqmmc-supply = <&vcc1v8>;
+};
+
+/* DBG_UART */
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+/* Bluetooth on AP6212 */
+&uart_A {
+ status = "disabled";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+};
+
+/* 40-pin CON1 */
+&uart_C {
+ status = "disabled";
+ pinctrl-0 = <&uart_c_pins>;
+ pinctrl-names = "default";
+};
+
+&usb0_phy {
+ status = "okay";
+ phy-supply = <&vdd_5v>;
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index 87198ea..a1078b3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -165,10 +165,10 @@
};
};
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
};
ðmac {
@@ -195,12 +195,32 @@
};
};
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
/* Wireless SDIO Module */
&sd_emmc_a {
status = "okay";
@@ -260,28 +280,8 @@
vqmmc-supply = <&vddio_boot>;
};
-&pwm_ef {
+&uart_AO {
status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "clkin0";
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
- pinctrl-names = "default";
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 54a9c6a..d147c85 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -137,16 +137,6 @@
};
};
-&scpi_clocks {
- status = "disabled";
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
ðmac {
status = "okay";
pinctrl-0 = <ð_rgmii_pins>;
@@ -172,6 +162,33 @@
};
};
+&gpio_ao {
+ /*
+ * WARNING: The USB Hub on the Odroid-C2 needs a reset signal
+ * to be turned high in order to be detected by the USB Controller
+ * This signal should be handled by a USB specific power sequence
+ * in order to reset the Hub when USB bus is powered down.
+ */
+ usb-hub {
+ gpio-hog;
+ gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb-hub-reset";
+ };
+};
+
+&i2c_A {
+ status = "okay";
+ pinctrl-0 = <&i2c_a_pins>;
+ pinctrl-names = "default";
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
&pinctrl_aobus {
gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En",
"USB HUB nRESET", "USB OTG Power En",
@@ -223,55 +240,15 @@
"";
};
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
-};
-
-&i2c_A {
- status = "okay";
- pinctrl-0 = <&i2c_a_pins>;
- pinctrl-names = "default";
-};
-
-&gpio_ao {
- /*
- * WARNING: The USB Hub on the Odroid-C2 needs a reset signal
- * to be turned high in order to be detected by the USB Controller
- * This signal should be handled by a USB specific power sequence
- * in order to reset the Hub when USB bus is powered down.
- */
- usb-hub {
- gpio-hog;
- gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "usb-hub-reset";
- };
-};
-
-&usb0_phy {
- status = "okay";
- phy-supply = <&usb_otg_pwr>;
-};
-
-&usb1_phy {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&usb1 {
- status = "okay";
-};
-
&saradc {
status = "okay";
vref-supply = <&vcc1v8>;
};
+&scpi_clocks {
+ status = "disabled";
+};
+
/* SD */
&sd_emmc_b {
status = "okay";
@@ -309,3 +286,26 @@
vmmc-supply = <&vcc3v3>;
vqmmc-supply = <&vcc1v8>;
};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb0_phy {
+ status = "okay";
+ phy-supply = <&usb_otg_pwr>;
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index 3c6c0b7..d904deb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -126,7 +126,7 @@
clock-names = "ext_clock";
};
- cvbs-connector {
+ cvbs_connector: cvbs-connector {
compatible = "composite-video-connector";
port {
@@ -148,34 +148,36 @@
};
};
-/* This UART is brought out to the DB9 connector */
-&uart_AO {
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+&hdmi_tx {
status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
};
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
-&usb0_phy {
+&pwm_ef {
status = "okay";
- phy-supply = <&usb_pwr>;
-};
-
-&usb1_phy {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&usb1 {
- status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
};
/* Wireless SDIO Module */
@@ -198,7 +200,7 @@
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
- brcmf: bcrmf@1 {
+ brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
@@ -242,28 +244,26 @@
vqmmc-supply = <&vddio_boot>;
};
-&pwm_ef {
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
- pinctrl-names = "default";
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "clkin0";
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
+&usb0_phy {
+ status = "okay";
+ phy-supply = <&usb_pwr>;
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index aefa66d..346753f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -111,18 +111,6 @@
};
};
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
-};
-
ðmac {
status = "okay";
pinctrl-0 = <ð_rgmii_pins>;
@@ -149,21 +137,18 @@
};
};
-&usb0_phy {
+&ir {
status = "okay";
- phy-supply = <&usb_vbus>;
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
};
-&usb1_phy {
+&pwm_ef {
status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&usb1 {
- status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
};
/* Wireless SDIO Module */
@@ -186,7 +171,7 @@
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vcc_1v8>;
- brcmf: bcrmf@1 {
+ brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
@@ -229,10 +214,25 @@
vmmcq-sumpply = <&vcc_1v8>;
};
-&pwm_ef {
+&uart_AO {
status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "clkin0";
+};
+
+&usb0_phy {
+ status = "okay";
+ phy-supply = <&usb_vbus>;
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
index f057fb4..1878ac2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
@@ -59,10 +59,10 @@
panic-indicator;
};
};
+};
- cvbs-connector {
- status = "disabled";
- };
+&cvbs_connector {
+ status = "disabled";
};
ðmac {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
index 743acb5..e76ac31 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -85,6 +85,34 @@
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
};
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+};
+
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
};
ðmac {
@@ -113,6 +141,18 @@
};
};
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
&i2c_A {
status = "okay";
pinctrl-0 = <&i2c_a_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 86105a6..17d3efd 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -97,13 +97,6 @@
};
};
-ðmac {
- clocks = <&clkc CLKID_ETH>,
- <&clkc CLKID_FCLK_DIV2>,
- <&clkc CLKID_MPLL2>;
- clock-names = "stmmaceth", "clkin0", "clkin1";
-};
-
&aobus {
pinctrl_aobus: pinctrl@14 {
compatible = "amlogic,meson-gxbb-aobus-pinctrl";
@@ -249,9 +242,119 @@
function = "spdif_out_ao";
};
};
+
+ ao_cec_pins: ao_cec {
+ mux {
+ groups = "ao_cec";
+ function = "cec_ao";
+ };
+ };
+
+ ee_cec_pins: ee_cec {
+ mux {
+ groups = "ee_cec";
+ function = "cec_ao";
+ };
+ };
};
};
+&apb {
+ mali: gpu@c0000 {
+ compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+ reg = <0x0 0xc0000 0x0 0x40000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp", "gpmmu", "pp", "pmu",
+ "pp0", "ppmmu0", "pp1", "ppmmu1",
+ "pp2", "ppmmu2";
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+ clock-names = "bus", "core";
+
+ /*
+ * Mali clocking is provided by two identical clock paths
+ * MALI_0 and MALI_1 muxed to a single clock by a glitch
+ * free mux to safely change frequency while running.
+ */
+ assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+ <&clkc CLKID_MALI_0>,
+ <&clkc CLKID_MALI>; /* Glitch free mux */
+ assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+ <0>, /* Do Nothing */
+ <&clkc CLKID_MALI_0>;
+ assigned-clock-rates = <0>, /* Do Nothing */
+ <666666666>,
+ <0>; /* Do Nothing */
+ };
+};
+
+&cbus {
+ spifc: spi@8c80 {
+ compatible = "amlogic,meson-gxbb-spifc";
+ reg = <0x0 0x08c80 0x0 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_SPI>;
+ status = "disabled";
+ };
+};
+
+ðmac {
+ clocks = <&clkc CLKID_ETH>,
+ <&clkc CLKID_FCLK_DIV2>,
+ <&clkc CLKID_MPLL2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1";
+};
+
+&hdmi_tx {
+ compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+ resets = <&reset RESET_HDMITX_CAPB3>,
+ <&reset RESET_HDMI_SYSTEM_RESET>,
+ <&reset RESET_HDMI_TX>;
+ reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+ clocks = <&clkc CLKID_HDMI_PCLK>,
+ <&clkc CLKID_CLK81>,
+ <&clkc CLKID_GCLK_VENCI_INT0>;
+ clock-names = "isfr", "iahb", "venci";
+};
+
+&hiubus {
+ clkc: clock-controller@0 {
+ compatible = "amlogic,gxbb-clkc";
+ #clock-cells = <1>;
+ reg = <0x0 0x0 0x0 0x3db>;
+ };
+};
+
+&hwrng {
+ clocks = <&clkc CLKID_RNG0>;
+ clock-names = "core";
+};
+
+&i2c_A {
+ clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_AO {
+ clocks = <&clkc CLKID_AO_I2C>;
+};
+
+&i2c_B {
+ clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+ clocks = <&clkc CLKID_I2C>;
+};
+
&periphs {
pinctrl_periphs: pinctrl@4b0 {
compatible = "amlogic,meson-gxbb-periphs-pinctrl";
@@ -262,7 +365,7 @@
gpio: bank@4b0 {
reg = <0x0 0x004b0 0x0 0x28>,
<0x0 0x004e8 0x0 0x14>,
- <0x0 0x00120 0x0 0x14>,
+ <0x0 0x00520 0x0 0x14>,
<0x0 0x00430 0x0 0x40>;
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
@@ -290,6 +393,22 @@
};
};
+ spi_pins: spi {
+ mux {
+ groups = "spi_miso",
+ "spi_mosi",
+ "spi_sclk";
+ function = "spi";
+ };
+ };
+
+ spi_ss0_pins: spi-ss0 {
+ mux {
+ groups = "spi_ss0";
+ function = "spi";
+ };
+ };
+
sdcard_pins: sdcard {
mux {
groups = "sdcard_d0",
@@ -521,67 +640,6 @@
};
};
-&hiubus {
- clkc: clock-controller@0 {
- compatible = "amlogic,gxbb-clkc";
- #clock-cells = <1>;
- reg = <0x0 0x0 0x0 0x3db>;
- };
-};
-
-&apb {
- mali: gpu@c0000 {
- compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
- reg = <0x0 0xc0000 0x0 0x40000>;
- interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "gp", "gpmmu", "pp", "pmu",
- "pp0", "ppmmu0", "pp1", "ppmmu1",
- "pp2", "ppmmu2";
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
- clock-names = "bus", "core";
-
- /*
- * Mali clocking is provided by two identical clock paths
- * MALI_0 and MALI_1 muxed to a single clock by a glitch
- * free mux to safely change frequency while running.
- */
- assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
- <&clkc CLKID_MALI_0>,
- <&clkc CLKID_MALI>; /* Glitch free mux */
- assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
- <0>, /* Do Nothing */
- <&clkc CLKID_MALI_0>;
- assigned-clock-rates = <0>, /* Do Nothing */
- <666666666>,
- <0>; /* Do Nothing */
- };
-};
-
-&i2c_A {
- clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_AO {
- clocks = <&clkc CLKID_AO_I2C>;
-};
-
-&i2c_B {
- clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_C {
- clocks = <&clkc CLKID_I2C>;
-};
-
&saradc {
compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
clocks = <&xtal>,
@@ -613,6 +671,13 @@
clock-names = "core", "clkin0", "clkin1";
};
+&spicc {
+ clocks = <&clkc CLKID_SPICC>;
+ clock-names = "core";
+ resets = <&reset RESET_PERIPHS_SPICC>;
+ num-cs = <1>;
+};
+
&spifc {
clocks = <&clkc CLKID_SPI>;
};
@@ -620,20 +685,3 @@
&vpu {
compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
};
-
-&hwrng {
- clocks = <&clkc CLKID_RNG0>;
- clock-names = "core";
-};
-
-&hdmi_tx {
- compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
- resets = <&reset RESET_HDMITX_CAPB3>,
- <&reset RESET_HDMI_SYSTEM_RESET>,
- <&reset RESET_HDMI_TX>;
- reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
- clocks = <&clkc CLKID_HDMI_PCLK>,
- <&clkc CLKID_CLK81>,
- <&clkc CLKID_GCLK_VENCI_INT0>;
- clock-names = "isfr", "iahb", "venci";
-};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
index f9fbfda..3e0c023d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
@@ -84,6 +84,17 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
};
/* P230 has exclusive choice between internal or external PHY */
@@ -113,6 +124,19 @@
};
};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
&saradc {
status = "okay";
vref-supply = <&vddio_ao18>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index 3c8b0b5..72c5a9f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -54,6 +54,29 @@
linux,default-trigger = "default-on";
};
};
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
};
&i2c_A {
@@ -95,7 +118,7 @@
};
&sd_emmc_a {
- brcmf: bcrmf@1 {
+ brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
new file mode 100644
index 0000000..890821d
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -0,0 +1,92 @@
+/*
+ * Copyright (c) 2017 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "meson-gxl-s905x-p212.dtsi"
+
+/ {
+ compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
+ model = "Libre Technology CC";
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ system {
+ label = "librecomputer:system-status";
+ gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ panic-indicator;
+ };
+
+ blue {
+ label = "librecomputer:blue";
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+/*
+ * The following devices exists but are exposed on the general
+ * purpose GPIO header. End user may well decide to use those pins
+ * for another purpose
+ */
+
+&sd_emmc_a {
+ status = "disabled";
+};
+
+&uart_A {
+ status = "disabled";
+};
+
+&wifi32k {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
index 8873c05..6633a5d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@@ -140,10 +140,10 @@
};
};
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
};
ðmac {
@@ -152,12 +152,32 @@
phy-handle = <&internal_phy>;
};
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
/* Wireless SDIO Module */
&sd_emmc_a {
status = "okay";
@@ -217,28 +237,8 @@
vqmmc-supply = <&vddio_boot>;
};
-&pwm_ef {
+&uart_AO {
status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "clkin0";
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
- pinctrl-names = "default";
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
index db31e09..6ab17c1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
@@ -58,6 +58,17 @@
};
};
};
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
};
&cvbs_vdac_port {
@@ -66,6 +77,18 @@
};
};
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
/* This UART is brought out to the DB9 connector */
&uart_AO {
status = "okay";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi
index 0f78d83..3314a0b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi
@@ -48,7 +48,7 @@
compatible = "amlogic,s905x", "amlogic,meson-gxl";
};
-/* S905X Only has access to its internal PHY */
+/* S905X only has access to its internal PHY */
ðmac {
phy-mode = "rmii";
phy-handle = <&internal_phy>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index d8e096d..8d4f316 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -190,9 +190,59 @@
function = "spdif_out_ao";
};
};
+
+ ao_cec_pins: ao_cec {
+ mux {
+ groups = "ao_cec";
+ function = "cec_ao";
+ };
+ };
+
+ ee_cec_pins: ee_cec {
+ mux {
+ groups = "ee_cec";
+ function = "cec_ao";
+ };
+ };
};
};
+&hdmi_tx {
+ compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+ resets = <&reset RESET_HDMITX_CAPB3>,
+ <&reset RESET_HDMI_SYSTEM_RESET>,
+ <&reset RESET_HDMI_TX>;
+ reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+ clocks = <&clkc CLKID_HDMI_PCLK>,
+ <&clkc CLKID_CLK81>,
+ <&clkc CLKID_GCLK_VENCI_INT0>;
+ clock-names = "isfr", "iahb", "venci";
+};
+
+&hiubus {
+ clkc: clock-controller@0 {
+ compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc";
+ #clock-cells = <1>;
+ reg = <0x0 0x0 0x0 0x3db>;
+ };
+};
+
+&i2c_A {
+ clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_AO {
+ clocks = <&clkc CLKID_AO_I2C>;
+};
+
+&i2c_B {
+ clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+ clocks = <&clkc CLKID_I2C>;
+};
+
&periphs {
pinctrl_periphs: pinctrl@4b0 {
compatible = "amlogic,meson-gxl-periphs-pinctrl";
@@ -203,12 +253,12 @@
gpio: bank@4b0 {
reg = <0x0 0x004b0 0x0 0x28>,
<0x0 0x004e8 0x0 0x14>,
- <0x0 0x00120 0x0 0x14>,
+ <0x0 0x00520 0x0 0x14>,
<0x0 0x00430 0x0 0x40>;
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
- gpio-ranges = <&pinctrl_periphs 0 14 101>;
+ gpio-ranges = <&pinctrl_periphs 0 10 101>;
};
emmc_pins: emmc {
@@ -231,6 +281,22 @@
};
};
+ spi_pins: spi {
+ mux {
+ groups = "spi_miso",
+ "spi_mosi",
+ "spi_sclk";
+ function = "spi";
+ };
+ };
+
+ spi_ss0_pins: spi-ss0 {
+ mux {
+ groups = "spi_ss0";
+ function = "spi";
+ };
+ };
+
sdcard_pins: sdcard {
mux {
groups = "sdcard_d0",
@@ -354,6 +420,20 @@
};
};
+ eth_link_led_pins: eth_link_led {
+ mux {
+ groups = "eth_link_led";
+ function = "eth_led";
+ };
+ };
+
+ eth_act_led_pins: eth_act_led {
+ mux {
+ groups = "eth_act_led";
+ function = "eth_led";
+ };
+ };
+
pwm_a_pins: pwm_a {
mux {
groups = "pwm_a";
@@ -501,30 +581,6 @@
};
};
-&hiubus {
- clkc: clock-controller@0 {
- compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc";
- #clock-cells = <1>;
- reg = <0x0 0x0 0x0 0x3db>;
- };
-};
-
-&i2c_A {
- clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_AO {
- clocks = <&clkc CLKID_AO_I2C>;
-};
-
-&i2c_B {
- clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_C {
- clocks = <&clkc CLKID_I2C>;
-};
-
&saradc {
compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
clocks = <&xtal>,
@@ -556,6 +612,13 @@
clock-names = "core", "clkin0", "clkin1";
};
+&spicc {
+ clocks = <&clkc CLKID_SPICC>;
+ clock-names = "core";
+ resets = <&reset RESET_PERIPHS_SPICC>;
+ num-cs = <1>;
+};
+
&spifc {
clocks = <&clkc CLKID_SPI>;
};
@@ -563,15 +626,3 @@
&vpu {
compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
};
-
-&hdmi_tx {
- compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
- resets = <&reset RESET_HDMITX_CAPB3>,
- <&reset RESET_HDMI_SYSTEM_RESET>,
- <&reset RESET_HDMI_TX>;
- reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
- clocks = <&clkc CLKID_HDMI_PCLK>,
- <&clkc CLKID_CLK81>,
- <&clkc CLKID_GCLK_VENCI_INT0>;
- clock-names = "isfr", "iahb", "venci";
-};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index 11b0bf4..5f626d6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -113,11 +113,49 @@
};
};
-/* This UART is brought out to the DB9 connector */
-&uart_AO {
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+ðmac {
status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
+
+ pinctrl-0 = <ð_pins>;
pinctrl-names = "default";
+
+ /* Select external PHY by default */
+ phy-handle = <&external_phy>;
+
+ amlogic,tx-delay-ns = <2>;
+
+ snps,reset-gpio = <&gpio GPIOZ_14 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ /* External PHY is in RGMII */
+ phy-mode = "rgmii";
+};
+
+&external_mdio {
+ external_phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ max-speed = <1000>;
+ };
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
};
&ir {
@@ -164,47 +202,8 @@
vqmmc-supply = <&vddio_boot>;
};
-ðmac {
+&uart_AO {
status = "okay";
-
- pinctrl-0 = <ð_pins>;
+ pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
-
- /* Select external PHY by default */
- phy-handle = <&external_phy>;
-
- amlogic,tx-delay-ns = <2>;
-
- snps,reset-gpio = <&gpio GPIOZ_14 0>;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-active-low;
-
- /* External PHY is in RGMII */
- phy-mode = "rgmii";
-};
-
-&external_mdio {
- external_phy: ethernet-phy@0 {
- compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- max-speed = <1000>;
- };
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
- pinctrl-names = "default";
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
new file mode 100644
index 0000000..08f1dd6
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@@ -0,0 +1,240 @@
+/*
+ * Copyright (c) 2016-2017 Andreas Färber
+ *
+ * Based on nexbox-a1:
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+
+/ {
+ compatible = "kingnovel,r-box-pro", "amlogic,s912", "amlogic,meson-gxm";
+ model = "R-Box Pro";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ blue {
+ label = "rbox-pro:blue:on";
+ gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ red {
+ label = "rbox-pro:red:standby";
+ gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ retain-state-suspended;
+ panic-indicator;
+ };
+ };
+
+ vddio_boot: regulator-vddio-boot {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddao_3v3: regulator-vddao-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vcc_3v3: regulator-vcc-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+};
+
+ðmac {
+ status = "okay";
+
+ pinctrl-0 = <ð_pins>;
+ pinctrl-names = "default";
+
+ /* Select external PHY by default */
+ phy-handle = <&external_phy>;
+
+ snps,reset-gpio = <&gpio GPIOZ_14 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ amlogic,tx-delay-ns = <2>;
+
+ /* External PHY is in RGMII */
+ phy-mode = "rgmii";
+};
+
+&external_mdio {
+ external_phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ max-speed = <1000>;
+ };
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+ status = "okay";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+
+ brcmf: brcmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index bfe7d68..e8b7413 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -53,7 +53,6 @@
#global-interrupts = <1>;
dma-coherent;
power-domains = <&scpi_devpd 0>;
- status = "disabled";
};
gic: interrupt-controller@2c010000 {
@@ -202,6 +201,15 @@
};
};
+ cpu_debug0: cpu_debug@22010000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x0 0x22010000 0x0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ };
+
etm0: etm@22040000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x22040000 0 0x1000>;
@@ -252,6 +260,15 @@
};
};
+ cpu_debug1: cpu_debug@22110000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x0 0x22110000 0x0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ };
+
etm1: etm@22140000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x22140000 0 0x1000>;
@@ -266,6 +283,15 @@
};
};
+ cpu_debug2: cpu_debug@23010000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x0 0x23010000 0x0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ };
+
etm2: etm@23040000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x23040000 0 0x1000>;
@@ -330,6 +356,15 @@
};
};
+ cpu_debug3: cpu_debug@23110000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x0 0x23110000 0x0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ };
+
etm3: etm@23140000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x23140000 0 0x1000>;
@@ -344,6 +379,15 @@
};
};
+ cpu_debug4: cpu_debug@23210000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x0 0x23210000 0x0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ };
+
etm4: etm@23240000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x23240000 0 0x1000>;
@@ -358,6 +402,15 @@
};
};
+ cpu_debug5: cpu_debug@23310000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x0 0x23310000 0x0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ };
+
etm5: etm@23340000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x23340000 0 0x1000>;
@@ -546,7 +599,6 @@
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
#global-interrupts = <1>;
- status = "disabled";
};
smmu_hdlcd0: iommu@7fb20000 {
@@ -556,7 +608,6 @@
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
#global-interrupts = <1>;
- status = "disabled";
};
smmu_usb: iommu@7fb30000 {
@@ -567,7 +618,6 @@
#iommu-cells = <1>;
#global-interrupts = <1>;
dma-coherent;
- status = "disabled";
};
dma@7ff00000 {
diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
index 0e8943a..aed6389 100644
--- a/arch/arm64/boot/dts/arm/juno-r1.dts
+++ b/arch/arm64/boot/dts/arm/juno-r1.dts
@@ -281,3 +281,27 @@
&stm_out_port {
remote-endpoint = <&csys1_funnel_in_port0>;
};
+
+&cpu_debug0 {
+ cpu = <&A57_0>;
+};
+
+&cpu_debug1 {
+ cpu = <&A57_1>;
+};
+
+&cpu_debug2 {
+ cpu = <&A53_0>;
+};
+
+&cpu_debug3 {
+ cpu = <&A53_1>;
+};
+
+&cpu_debug4 {
+ cpu = <&A53_2>;
+};
+
+&cpu_debug5 {
+ cpu = <&A53_3>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts
index 405e2fb..b39b6d6 100644
--- a/arch/arm64/boot/dts/arm/juno-r2.dts
+++ b/arch/arm64/boot/dts/arm/juno-r2.dts
@@ -281,3 +281,27 @@
&stm_out_port {
remote-endpoint = <&csys1_funnel_in_port0>;
};
+
+&cpu_debug0 {
+ cpu = <&A72_0>;
+};
+
+&cpu_debug1 {
+ cpu = <&A72_1>;
+};
+
+&cpu_debug2 {
+ cpu = <&A53_0>;
+};
+
+&cpu_debug3 {
+ cpu = <&A53_1>;
+};
+
+&cpu_debug4 {
+ cpu = <&A53_2>;
+};
+
+&cpu_debug5 {
+ cpu = <&A53_3>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
index 0220494..c9236c4 100644
--- a/arch/arm64/boot/dts/arm/juno.dts
+++ b/arch/arm64/boot/dts/arm/juno.dts
@@ -268,3 +268,27 @@
};
};
};
+
+&cpu_debug0 {
+ cpu = <&A57_0>;
+};
+
+&cpu_debug1 {
+ cpu = <&A57_1>;
+};
+
+&cpu_debug2 {
+ cpu = <&A53_0>;
+};
+
+&cpu_debug3 {
+ cpu = <&A53_1>;
+};
+
+&cpu_debug4 {
+ cpu = <&A53_2>;
+};
+
+&cpu_debug5 {
+ cpu = <&A53_3>;
+};
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index bfa8f8e..f11bdd6 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -1,6 +1,7 @@
dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb ns2-xmc.dtb
+dts-dirs := stingray
always := $(dtb-y)
subdir-y := $(dts-dirs)
clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
index c309633..972f14d 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -22,3 +22,20 @@
&uart1 {
status = "okay";
};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_gpio34>;
+ status = "okay";
+ bus-width = <4>;
+ non-removable;
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhost_gpio48>;
+ status = "okay";
+ bus-width = <4>;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837.dtsi b/arch/arm64/boot/dts/broadcom/bcm2837.dtsi
index 19f2fe6..2d5de6f0 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2837.dtsi
@@ -75,6 +75,10 @@
interrupts = <8>;
};
+&cpu_thermal {
+ coefficients = <(-538) 412000>;
+};
+
/* enable thermal sensor with the correct compatible property set */
&thermal {
compatible = "brcm,bcm2837-thermal";
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index 35a309a..35c8457 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -460,6 +460,20 @@
};
};
+ usbdrd_phy: phy@66000960 {
+ #phy-cells = <0>;
+ compatible = "brcm,ns2-drd-phy";
+ reg = <0x66000960 0x24>,
+ <0x67012800 0x4>,
+ <0x6501d148 0x4>,
+ <0x664d0700 0x4>;
+ reg-names = "icfg", "rst-ctrl",
+ "crmu-ctrl", "usb2-strap";
+ id-gpios = <&gpio_g 30 0>;
+ vbus-gpios = <&gpio_g 31 0>;
+ status = "disabled";
+ };
+
pwm: pwm@66010000 {
compatible = "brcm,iproc-pwm";
reg = <0x66010000 0x28>;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/Makefile b/arch/arm64/boot/dts/broadcom/stingray/Makefile
new file mode 100644
index 0000000..f70028e
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/Makefile
@@ -0,0 +1,6 @@
+dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742k.dtb
+dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742t.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
new file mode 100644
index 0000000..5dca7d1
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -0,0 +1,131 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016-2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "stingray.dtsi"
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart0;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ sdio0_vddo_ctrl_reg: sdio0_vddo_ctrl {
+ compatible = "regulator-gpio";
+ regulator-name = "sdio0_vddo_ctrl_reg";
+ regulator-type = "voltage";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&pca9505 18 0>;
+ states = <3300000 0x0
+ 1800000 0x1>;
+ };
+
+ sdio1_vddo_ctrl_reg: sdio1_vddo_ctrl {
+ compatible = "regulator-gpio";
+ regulator-name = "sdio1_vddo_ctrl_reg";
+ regulator-type = "voltage";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&pca9505 19 0>;
+ states = <3300000 0x0
+ 1800000 0x1>;
+ };
+};
+
+&memory { /* Default DRAM banks */
+ reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */
+ <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&pwm {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ pca9505: pca9505@20 {
+ compatible = "nxp,pca9505";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ pcf8574: pcf8574@20 {
+ compatible = "nxp,pcf8574a";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x27>;
+ };
+};
+
+&nand {
+ status = "ok";
+ nandcs@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <16>;
+ brcm,nand-oob-sector-size = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&sdio0 {
+ vqmmc-supply = <&sdio0_vddo_ctrl_reg>;
+ non-removable;
+ full-pwr-cycle;
+ status = "okay";
+};
+
+&sdio1 {
+ vqmmc-supply = <&sdio1_vddo_ctrl_reg>;
+ full-pwr-cycle;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
new file mode 100644
index 0000000..5671669
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
@@ -0,0 +1,78 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016-2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm958742-base.dtsi"
+
+/ {
+ compatible = "brcm,bcm958742k", "brcm,stingray";
+ model = "Stingray Combo SVK (BCM958742K)";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&ssp0 {
+ pinctrl-0 = <&spi0_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpio_hsls 34 0>;
+ status = "okay";
+
+ spi-flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&ssp1 {
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpio_hsls 96 0>;
+ status = "okay";
+
+ spi-flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts
new file mode 100644
index 0000000..6ebe399
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts
@@ -0,0 +1,40 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm958742-base.dtsi"
+
+/ {
+ compatible = "brcm,bcm958742t", "brcm,stingray";
+ model = "Stingray SST100 (BCM958742T)";
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
new file mode 100644
index 0000000..cbc4337
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
@@ -0,0 +1,170 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016-2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/clock/bcm-sr.h>
+
+ osc: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+
+ crmu_ref25m: crmu_ref25m {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&osc>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ genpll0: genpll0@0001d104 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-genpll0";
+ reg = <0x0001d104 0x32>,
+ <0x0001c854 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll0", "clk_125", "clk_scr",
+ "clk_250", "clk_pcie_axi",
+ "clk_paxc_axi_x2",
+ "clk_paxc_axi";
+ };
+
+ genpll3: genpll3@0001d1e0 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-genpll3";
+ reg = <0x0001d1e0 0x32>,
+ <0x0001c854 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll3", "clk_hsls",
+ "clk_sdio";
+ };
+
+ genpll4: genpll4@0001d214 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-genpll4";
+ reg = <0x0001d214 0x32>,
+ <0x0001c854 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll4", "clk_ccn",
+ "clk_tpiu_pll", "noc_clk",
+ "pll_chclk_fs4",
+ "clk_bridge_fscpu";
+ };
+
+ genpll5: genpll5@0001d248 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-genpll5";
+ reg = <0x0001d248 0x32>,
+ <0x0001c870 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll5", "fs4_hf_clk",
+ "crypto_ae_clk", "raid_ae_clk";
+ };
+
+ lcpll0: lcpll0@0001d0c4 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-lcpll0";
+ reg = <0x0001d0c4 0x3c>,
+ <0x0001c870 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll0", "clk_sata_refp",
+ "clk_sata_refn", "clk_sata_350",
+ "clk_sata_500";
+ };
+
+ lcpll1: lcpll1@0001d138 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-lcpll1";
+ reg = <0x0001d138 0x3c>,
+ <0x0001c870 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll1", "clk_wanpn",
+ "clk_usb_ref",
+ "timesync_evt_clk";
+ };
+
+ hsls_clk: hsls_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll3 1>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+
+ hsls_div2_clk: hsls_div2_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
+ clock-div = <2>;
+ clock-mult = <1>;
+
+ };
+
+ hsls_div4_clk: hsls_div4_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+
+ hsls_25m_clk: hsls_25m_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&crmu_ref25m>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+
+ hsls_25m_div2_clk: hsls_25m_div2_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&hsls_25m_clk>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ sdio0_clk: sdio0_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+
+ sdio1_clk: sdio1_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
new file mode 100644
index 0000000..15214d0
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
@@ -0,0 +1,345 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016-2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/pinctrl/brcm,pinctrl-stingray.h>
+
+ pinconf: pinconf@00140000 {
+ compatible = "pinconf-single";
+ reg = <0x00140000 0x250>;
+ pinctrl-single,register-width = <32>;
+
+ /* pinconf functions */
+ };
+
+ pinmux: pinmux@0014029c {
+ compatible = "pinctrl-single";
+ reg = <0x0014029c 0x250>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xf>;
+ pinctrl-single,gpio-range = <
+ &range 0 154 MODE_GPIO
+ >;
+ range: gpio-range {
+ #pinctrl-single,gpio-range-cells = <3>;
+ };
+
+ /* pinctrl functions */
+ tsio_pins: pinmux_gpio_14 {
+ pinctrl-single,pins = <
+ 0x038 MODE_NITRO /* tsio_0 */
+ 0x03c MODE_NITRO /* tsio_1 */
+ >;
+ };
+
+ nor_pins: pinmux_pnor_adv_n {
+ pinctrl-single,pins = <
+ 0x0ac MODE_PNOR /* nand_ce1_n */
+ 0x0b0 MODE_PNOR /* nand_ce0_n */
+ 0x0b4 MODE_PNOR /* nand_we_n */
+ 0x0b8 MODE_PNOR /* nand_wp_n */
+ 0x0bc MODE_PNOR /* nand_re_n */
+ 0x0c0 MODE_PNOR /* nand_rdy_bsy_n */
+ 0x0c4 MODE_PNOR /* nand_io0_0 */
+ 0x0c8 MODE_PNOR /* nand_io1_0 */
+ 0x0cc MODE_PNOR /* nand_io2_0 */
+ 0x0d0 MODE_PNOR /* nand_io3_0 */
+ 0x0d4 MODE_PNOR /* nand_io4_0 */
+ 0x0d8 MODE_PNOR /* nand_io5_0 */
+ 0x0dc MODE_PNOR /* nand_io6_0 */
+ 0x0e0 MODE_PNOR /* nand_io7_0 */
+ 0x0e4 MODE_PNOR /* nand_io8_0 */
+ 0x0e8 MODE_PNOR /* nand_io9_0 */
+ 0x0ec MODE_PNOR /* nand_io10_0 */
+ 0x0f0 MODE_PNOR /* nand_io11_0 */
+ 0x0f4 MODE_PNOR /* nand_io12_0 */
+ 0x0f8 MODE_PNOR /* nand_io13_0 */
+ 0x0fc MODE_PNOR /* nand_io14_0 */
+ 0x100 MODE_PNOR /* nand_io15_0 */
+ 0x104 MODE_PNOR /* nand_ale_0 */
+ 0x108 MODE_PNOR /* nand_cle_0 */
+ 0x040 MODE_PNOR /* pnor_adv_n */
+ 0x044 MODE_PNOR /* pnor_baa_n */
+ 0x048 MODE_PNOR /* pnor_bls_0_n */
+ 0x04c MODE_PNOR /* pnor_bls_1_n */
+ 0x050 MODE_PNOR /* pnor_cre */
+ 0x054 MODE_PNOR /* pnor_cs_2_n */
+ 0x058 MODE_PNOR /* pnor_cs_1_n */
+ 0x05c MODE_PNOR /* pnor_cs_0_n */
+ 0x060 MODE_PNOR /* pnor_we_n */
+ 0x064 MODE_PNOR /* pnor_oe_n */
+ 0x068 MODE_PNOR /* pnor_intr */
+ 0x06c MODE_PNOR /* pnor_dat_0 */
+ 0x070 MODE_PNOR /* pnor_dat_1 */
+ 0x074 MODE_PNOR /* pnor_dat_2 */
+ 0x078 MODE_PNOR /* pnor_dat_3 */
+ 0x07c MODE_PNOR /* pnor_dat_4 */
+ 0x080 MODE_PNOR /* pnor_dat_5 */
+ 0x084 MODE_PNOR /* pnor_dat_6 */
+ 0x088 MODE_PNOR /* pnor_dat_7 */
+ 0x08c MODE_PNOR /* pnor_dat_8 */
+ 0x090 MODE_PNOR /* pnor_dat_9 */
+ 0x094 MODE_PNOR /* pnor_dat_10 */
+ 0x098 MODE_PNOR /* pnor_dat_11 */
+ 0x09c MODE_PNOR /* pnor_dat_12 */
+ 0x0a0 MODE_PNOR /* pnor_dat_13 */
+ 0x0a4 MODE_PNOR /* pnor_dat_14 */
+ 0x0a8 MODE_PNOR /* pnor_dat_15 */
+ >;
+ };
+
+ nand_pins: pinmux_nand_ce1_n {
+ pinctrl-single,pins = <
+ 0x0ac MODE_NAND /* nand_ce1_n */
+ 0x0b0 MODE_NAND /* nand_ce0_n */
+ 0x0b4 MODE_NAND /* nand_we_n */
+ 0x0b8 MODE_NAND /* nand_wp_n */
+ 0x0bc MODE_NAND /* nand_re_n */
+ 0x0c0 MODE_NAND /* nand_rdy_bsy_n */
+ 0x0c4 MODE_NAND /* nand_io0_0 */
+ 0x0c8 MODE_NAND /* nand_io1_0 */
+ 0x0cc MODE_NAND /* nand_io2_0 */
+ 0x0d0 MODE_NAND /* nand_io3_0 */
+ 0x0d4 MODE_NAND /* nand_io4_0 */
+ 0x0d8 MODE_NAND /* nand_io5_0 */
+ 0x0dc MODE_NAND /* nand_io6_0 */
+ 0x0e0 MODE_NAND /* nand_io7_0 */
+ 0x0e4 MODE_NAND /* nand_io8_0 */
+ 0x0e8 MODE_NAND /* nand_io9_0 */
+ 0x0ec MODE_NAND /* nand_io10_0 */
+ 0x0f0 MODE_NAND /* nand_io11_0 */
+ 0x0f4 MODE_NAND /* nand_io12_0 */
+ 0x0f8 MODE_NAND /* nand_io13_0 */
+ 0x0fc MODE_NAND /* nand_io14_0 */
+ 0x100 MODE_NAND /* nand_io15_0 */
+ 0x104 MODE_NAND /* nand_ale_0 */
+ 0x108 MODE_NAND /* nand_cle_0 */
+ >;
+ };
+
+ pwm0_pins: pinmux_pwm_0 {
+ pinctrl-single,pins = <
+ 0x10c MODE_NITRO
+ >;
+ };
+
+ pwm1_pins: pinmux_pwm_1 {
+ pinctrl-single,pins = <
+ 0x110 MODE_NITRO
+ >;
+ };
+
+ pwm2_pins: pinmux_pwm_2 {
+ pinctrl-single,pins = <
+ 0x114 MODE_NITRO
+ >;
+ };
+
+ pwm3_pins: pinmux_pwm_3 {
+ pinctrl-single,pins = <
+ 0x118 MODE_NITRO
+ >;
+ };
+
+ dbu_rxd_pins: pinmux_uart1_sin_nitro {
+ pinctrl-single,pins = <
+ 0x11c MODE_NITRO /* dbu_rxd */
+ 0x120 MODE_NITRO /* dbu_txd */
+ >;
+ };
+
+ uart1_pins: pinmux_uart1_sin_nand {
+ pinctrl-single,pins = <
+ 0x11c MODE_NAND /* uart1_sin */
+ 0x120 MODE_NAND /* uart1_out */
+ >;
+ };
+
+ uart2_pins: pinmux_uart2_sin {
+ pinctrl-single,pins = <
+ 0x124 MODE_NITRO /* uart2_sin */
+ 0x128 MODE_NITRO /* uart2_out */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_sin {
+ pinctrl-single,pins = <
+ 0x12c MODE_NITRO /* uart3_sin */
+ 0x130 MODE_NITRO /* uart3_out */
+ >;
+ };
+
+ i2s_pins: pinmux_i2s_bitclk {
+ pinctrl-single,pins = <
+ 0x134 MODE_NITRO /* i2s_bitclk */
+ 0x138 MODE_NITRO /* i2s_sdout */
+ 0x13c MODE_NITRO /* i2s_sdin */
+ 0x140 MODE_NITRO /* i2s_ws */
+ 0x144 MODE_NITRO /* i2s_mclk */
+ 0x148 MODE_NITRO /* i2s_spdif_out */
+ >;
+ };
+
+ qspi_pins: pinumx_qspi_hold_n {
+ pinctrl-single,pins = <
+ 0x14c MODE_NAND /* qspi_hold_n */
+ 0x150 MODE_NAND /* qspi_wp_n */
+ 0x154 MODE_NAND /* qspi_sck */
+ 0x158 MODE_NAND /* qspi_cs_n */
+ 0x15c MODE_NAND /* qspi_mosi */
+ 0x160 MODE_NAND /* qspi_miso */
+ >;
+ };
+
+ mdio_pins: pinumx_ext_mdio {
+ pinctrl-single,pins = <
+ 0x164 MODE_NITRO /* ext_mdio */
+ 0x168 MODE_NITRO /* ext_mdc */
+ >;
+ };
+
+ i2c0_pins: pinmux_i2c0_sda {
+ pinctrl-single,pins = <
+ 0x16c MODE_NITRO /* i2c0_sda */
+ 0x170 MODE_NITRO /* i2c0_scl */
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_sda {
+ pinctrl-single,pins = <
+ 0x174 MODE_NITRO /* i2c1_sda */
+ 0x178 MODE_NITRO /* i2c1_scl */
+ >;
+ };
+
+ sdio0_pins: pinmux_sdio0_cd_l {
+ pinctrl-single,pins = <
+ 0x17c MODE_NITRO /* sdio0_cd_l */
+ 0x180 MODE_NITRO /* sdio0_clk_sdcard */
+ 0x184 MODE_NITRO /* sdio0_data0 */
+ 0x188 MODE_NITRO /* sdio0_data1 */
+ 0x18c MODE_NITRO /* sdio0_data2 */
+ 0x190 MODE_NITRO /* sdio0_data3 */
+ 0x194 MODE_NITRO /* sdio0_data4 */
+ 0x198 MODE_NITRO /* sdio0_data5 */
+ 0x19c MODE_NITRO /* sdio0_data6 */
+ 0x1a0 MODE_NITRO /* sdio0_data7 */
+ 0x1a4 MODE_NITRO /* sdio0_cmd */
+ 0x1a8 MODE_NITRO /* sdio0_emmc_rst_n */
+ 0x1ac MODE_NITRO /* sdio0_led_on */
+ 0x1b0 MODE_NITRO /* sdio0_wp */
+ >;
+ };
+
+ sdio1_pins: pinmux_sdio1_cd_l {
+ pinctrl-single,pins = <
+ 0x1b4 MODE_NITRO /* sdio1_cd_l */
+ 0x1b8 MODE_NITRO /* sdio1_clk_sdcard */
+ 0x1bc MODE_NITRO /* sdio1_data0 */
+ 0x1c0 MODE_NITRO /* sdio1_data1 */
+ 0x1c4 MODE_NITRO /* sdio1_data2 */
+ 0x1c8 MODE_NITRO /* sdio1_data3 */
+ 0x1cc MODE_NITRO /* sdio1_data4 */
+ 0x1d0 MODE_NITRO /* sdio1_data5 */
+ 0x1d4 MODE_NITRO /* sdio1_data6 */
+ 0x1d8 MODE_NITRO /* sdio1_data7 */
+ 0x1dc MODE_NITRO /* sdio1_cmd */
+ 0x1e0 MODE_NITRO /* sdio1_emmc_rst_n */
+ 0x1e4 MODE_NITRO /* sdio1_led_on */
+ 0x1e8 MODE_NITRO /* sdio1_wp */
+ >;
+ };
+
+ spi0_pins: pinmux_spi0_sck_nand {
+ pinctrl-single,pins = <
+ 0x1ec MODE_NITRO /* spi0_sck */
+ 0x1f0 MODE_NITRO /* spi0_rxd */
+ 0x1f4 MODE_NITRO /* spi0_fss */
+ 0x1f8 MODE_NITRO /* spi0_txd */
+ >;
+ };
+
+ spi1_pins: pinmux_spi1_sck_nand {
+ pinctrl-single,pins = <
+ 0x1fc MODE_NITRO /* spi1_sck */
+ 0x200 MODE_NITRO /* spi1_rxd */
+ 0x204 MODE_NITRO /* spi1_fss */
+ 0x208 MODE_NITRO /* spi1_txd */
+ >;
+ };
+
+ nuart_pins: pinmux_uart0_sin_nitro {
+ pinctrl-single,pins = <
+ 0x20c MODE_NITRO /* nuart_rxd */
+ 0x210 MODE_NITRO /* nuart_txd */
+ >;
+ };
+
+ uart0_pins: pinumux_uart0_sin_nand {
+ pinctrl-single,pins = <
+ 0x20c MODE_NAND /* uart0_sin */
+ 0x210 MODE_NAND /* uart0_out */
+ 0x214 MODE_NAND /* uart0_rts */
+ 0x218 MODE_NAND /* uart0_cts */
+ 0x21c MODE_NAND /* uart0_dtr */
+ 0x220 MODE_NAND /* uart0_dcd */
+ 0x224 MODE_NAND /* uart0_dsr */
+ 0x228 MODE_NAND /* uart0_ri */
+ >;
+ };
+
+ drdu2_pins: pinmux_drdu2_overcurrent {
+ pinctrl-single,pins = <
+ 0x22c MODE_NITRO /* drdu2_overcurrent */
+ 0x230 MODE_NITRO /* drdu2_vbus_ppc */
+ 0x234 MODE_NITRO /* drdu2_vbus_present */
+ 0x238 MODE_NITRO /* drdu2_id */
+ >;
+ };
+
+ drdu3_pins: pinmux_drdu3_overcurrent {
+ pinctrl-single,pins = <
+ 0x23c MODE_NITRO /* drdu3_overcurrent */
+ 0x240 MODE_NITRO /* drdu3_vbus_ppc */
+ 0x244 MODE_NITRO /* drdu3_vbus_present */
+ 0x248 MODE_NITRO /* drdu3_id */
+ >;
+ };
+
+ usb3h_pins: pinmux_usb3h_overcurrent {
+ pinctrl-single,pins = <
+ 0x24c MODE_NITRO /* usb3h_overcurrent */
+ 0x250 MODE_NITRO /* usb3h_vbus_ppc */
+ >;
+ };
+ };
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
new file mode 100644
index 0000000..49933cf
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -0,0 +1,460 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015-2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "brcm,stingray";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@000 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER0_L2>;
+ };
+
+ cpu@001 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER0_L2>;
+ };
+
+ cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER1_L2>;
+ };
+
+ cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER1_L2>;
+ };
+
+ cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER2_L2>;
+ };
+
+ cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x201>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER2_L2>;
+ };
+
+ cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER3_L2>;
+ };
+
+ cpu@301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x301>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER3_L2>;
+ };
+
+ CLUSTER0_L2: l2-cache@000 {
+ compatible = "cache";
+ };
+
+ CLUSTER1_L2: l2-cache@100 {
+ compatible = "cache";
+ };
+
+ CLUSTER2_L2: l2-cache@200 {
+ compatible = "cache";
+ };
+
+ CLUSTER3_L2: l2-cache@300 {
+ compatible = "cache";
+ };
+ };
+
+ memory: memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x40000000>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ scr {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x61000000 0x05000000>;
+
+ gic: interrupt-controller@02c00000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ reg = <0x02c00000 0x010000>, /* GICD */
+ <0x02e00000 0x600000>; /* GICR */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ gic_its: gic-its@63c20000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x02c20000 0x10000>;
+ };
+ };
+
+ smmu: mmu@03000000 {
+ compatible = "arm,mmu-500";
+ reg = <0x03000000 0x80000>;
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 717 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 718 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 719 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 720 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 721 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 722 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 726 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 727 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 728 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 729 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 730 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 731 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 732 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 733 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 734 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 741 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 746 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 748 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 757 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 763 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <2>;
+ };
+ };
+
+ crmu: crmu {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x66400000 0x100000>;
+
+ #include "stingray-clock.dtsi"
+
+ gpio_crmu: gpio@00024800 {
+ compatible = "brcm,iproc-gpio";
+ reg = <0x00024800 0x4c>;
+ ngpios = <6>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+
+ hsls {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x68900000 0x17700000>;
+
+ #include "stingray-pinctrl.dtsi"
+
+ pwm: pwm@00010000 {
+ compatible = "brcm,iproc-pwm";
+ reg = <0x00010000 0x1000>;
+ clocks = <&crmu_ref25m>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@000b0000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x000b0000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ wdt0: watchdog@000c0000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x000c0000 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
+
+ gpio_hsls: gpio@000d0000 {
+ compatible = "brcm,iproc-gpio";
+ reg = <0x000d0000 0x864>;
+ ngpios = <151>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&pinmux 0 0 16>,
+ <&pinmux 16 71 2>,
+ <&pinmux 18 131 8>,
+ <&pinmux 26 83 6>,
+ <&pinmux 32 123 4>,
+ <&pinmux 36 43 24>,
+ <&pinmux 60 89 2>,
+ <&pinmux 62 73 4>,
+ <&pinmux 66 95 28>,
+ <&pinmux 94 127 4>,
+ <&pinmux 98 139 10>,
+ <&pinmux 108 16 27>,
+ <&pinmux 135 77 6>,
+ <&pinmux 141 67 4>,
+ <&pinmux 145 149 6>,
+ <&pinmux 151 91 4>;
+ };
+
+ i2c1: i2c@000e0000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x000e0000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 178 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ uart0: uart@00100000 {
+ device_type = "serial";
+ compatible = "snps,dw-apb-uart";
+ reg = <0x00100000 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <25000000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart1: uart@00110000 {
+ device_type = "serial";
+ compatible = "snps,dw-apb-uart";
+ reg = <0x00110000 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <25000000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart2: uart@00120000 {
+ device_type = "serial";
+ compatible = "snps,dw-apb-uart";
+ reg = <0x00120000 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <25000000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart3: uart@00130000 {
+ device_type = "serial";
+ compatible = "snps,dw-apb-uart";
+ reg = <0x00130000 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <25000000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ssp0: ssp@00180000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x00180000 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
+ clock-names = "spiclk", "apb_pclk";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ ssp1: ssp@00190000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x00190000 0x1000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
+ clock-names = "spiclk", "apb_pclk";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ hwrng: hwrng@00220000 {
+ compatible = "brcm,iproc-rng200";
+ reg = <0x00220000 0x28>;
+ };
+
+ dma0: dma@00310000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x00310000 0x1000>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ clocks = <&hsls_div2_clk>;
+ clock-names = "apb_pclk";
+ iommus = <&smmu 0x6000 0x0000>;
+ };
+
+ nand: nand@00360000 {
+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+ reg = <0x00360000 0x600>,
+ <0x0050a408 0x600>,
+ <0x00360f00 0x20>;
+ reg-names = "nand", "iproc-idm", "iproc-ext";
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ brcm,nand-has-wp;
+ status = "disabled";
+ };
+
+ sdio0: sdhci@003f1000 {
+ compatible = "brcm,sdhci-iproc";
+ reg = <0x003f1000 0x100>;
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+ bus-width = <8>;
+ clocks = <&sdio0_clk>;
+ iommus = <&smmu 0x6002 0x0000>;
+ status = "disabled";
+ };
+
+ sdio1: sdhci@003f2000 {
+ compatible = "brcm,sdhci-iproc";
+ reg = <0x003f2000 0x100>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ bus-width = <8>;
+ clocks = <&sdio1_clk>;
+ iommus = <&smmu 0x6003 0x0000>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index 3ff9527..23191eb 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -60,7 +60,6 @@
vci-supply = <&ldo28_reg>;
reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
- te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
index 17fae81..7286b1e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
@@ -1,7 +1,7 @@
/*
* Device Tree file for Freescale LS1012A Freedom Board.
*
- * Copyright 2016, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index e2a93d5..8c013b5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -1,7 +1,7 @@
/*
* Device Tree file for Freescale LS1012A QDS Board.
*
- * Copyright 2016, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
@@ -97,6 +97,14 @@
status = "okay";
};
+&esdhc0 {
+ status = "okay";
+};
+
+&esdhc1 {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
index ed77f6b..c1a119e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
@@ -1,7 +1,7 @@
/*
* Device Tree file for Freescale LS1012A RDB Board.
*
- * Copyright 2016, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
@@ -54,6 +54,19 @@
status = "okay";
};
+&esdhc0 {
+ sd-uhs-sdr104;
+ sd-uhs-sdr50;
+ sd-uhs-sdr25;
+ sd-uhs-sdr12;
+ status = "okay";
+};
+
+&esdhc1 {
+ mmc-hs200-1_8v;
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index b497ac1..b1554cb 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -1,7 +1,7 @@
/*
* Device Tree Include file for Freescale Layerscape-1012A family SoC.
*
- * Copyright 2016, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
@@ -76,10 +76,17 @@
sysclk: sysclk {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <100000000>;
+ clock-frequency = <125000000>;
clock-output-names = "sysclk";
};
+ coreclk: coreclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "coreclk";
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
@@ -117,12 +124,37 @@
#size-cells = <2>;
ranges;
+ esdhc0: esdhc@1560000 {
+ compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
+ reg = <0x0 0x1560000 0x0 0x10000>;
+ interrupts = <0 62 0x4>;
+ clocks = <&clockgen 4 0>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ big-endian;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
scfg: scfg@1570000 {
compatible = "fsl,ls1012a-scfg", "syscon";
reg = <0x0 0x1570000 0x0 0x10000>;
big-endian;
};
+ esdhc1: esdhc@1580000 {
+ compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
+ reg = <0x0 0x1580000 0x0 0x10000>;
+ interrupts = <0 65 0x4>;
+ clocks = <&clockgen 4 0>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ big-endian;
+ broken-cd;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
crypto: crypto@1700000 {
compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
"fsl,sec-v4.0";
@@ -223,7 +255,8 @@
compatible = "fsl,ls1012a-clockgen";
reg = <0x0 0x1ee1000 0x0 0x1000>;
#clock-cells = <2>;
- clocks = <&sysclk>;
+ clocks = <&sysclk &coreclk>;
+ clock-names = "sysclk", "coreclk";
};
tmu: tmu@1f00000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
new file mode 100644
index 0000000..169e171
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
@@ -0,0 +1,45 @@
+/*
+ * QorIQ FMan v3 device tree nodes for ls1043
+ *
+ * Copyright 2015-2016 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+&soc {
+
+/* include used FMan blocks */
+#include "qoriq-fman3-0.dtsi"
+#include "qoriq-fman3-0-1g-0.dtsi"
+#include "qoriq-fman3-0-1g-1.dtsi"
+#include "qoriq-fman3-0-1g-2.dtsi"
+#include "qoriq-fman3-0-1g-3.dtsi"
+#include "qoriq-fman3-0-1g-4.dtsi"
+#include "qoriq-fman3-0-1g-5.dtsi"
+#include "qoriq-fman3-0-10g-0.dtsi"
+
+};
+
+&fman0 {
+ /* these aliases provide the FMan ports mapping */
+ enet0: ethernet@e0000 {
+ };
+
+ enet1: ethernet@e2000 {
+ };
+
+ enet2: ethernet@e4000 {
+ };
+
+ enet3: ethernet@e6000 {
+ };
+
+ enet4: ethernet@e8000 {
+ };
+
+ enet5: ethernet@ea000 {
+ };
+
+ enet6: ethernet@f0000 {
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index 0989d63..6341281 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -1,7 +1,7 @@
/*
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
- * Copyright 2014-2015, Freescale Semiconductor
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*
@@ -181,3 +181,5 @@
reg = <0>;
};
};
+
+#include "fsl-ls1043-post.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index c37110b..3dc0c8e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -1,7 +1,7 @@
/*
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
- * Copyright 2014-2015, Freescale Semiconductor
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*
@@ -75,11 +75,11 @@
reg = <0x4c>;
};
eeprom@52 {
- compatible = "at24,24c512";
+ compatible = "atmel,24c512";
reg = <0x52>;
};
eeprom@53 {
- compatible = "at24,24c512";
+ compatible = "atmel,24c512";
reg = <0x53>;
};
rtc@68 {
@@ -139,3 +139,76 @@
&duart1 {
status = "okay";
};
+
+#include "fsl-ls1043-post.dtsi"
+
+&fman0 {
+ ethernet@e0000 {
+ phy-handle = <&qsgmii_phy1>;
+ phy-connection-type = "qsgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&qsgmii_phy2>;
+ phy-connection-type = "qsgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii-txid";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii-txid";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&qsgmii_phy3>;
+ phy-connection-type = "qsgmii";
+ };
+
+ ethernet@ea000 {
+ phy-handle = <&qsgmii_phy4>;
+ phy-connection-type = "qsgmii";
+ };
+
+ ethernet@f0000 { /* 10GEC1 */
+ phy-handle = <&aqr105_phy>;
+ phy-connection-type = "xgmii";
+ };
+
+ mdio@fc000 {
+ rgmii_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+
+ rgmii_phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+
+ qsgmii_phy1: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+
+ qsgmii_phy2: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+
+ qsgmii_phy3: ethernet-phy@6 {
+ reg = <0x6>;
+ };
+
+ qsgmii_phy4: ethernet-phy@7 {
+ reg = <0x7>;
+ };
+ };
+
+ mdio@fd000 {
+ aqr105_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 132 4>;
+ reg = <0x1>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 45cface..31fd77f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -1,7 +1,7 @@
/*
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
- * Copyright 2014-2015, Freescale Semiconductor
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*
@@ -45,6 +45,7 @@
*/
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "fsl,ls1043a";
@@ -52,6 +53,17 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ fman0 = &fman0;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ ethernet4 = &enet4;
+ ethernet5 = &enet5;
+ ethernet6 = &enet6;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -106,6 +118,33 @@
/* DRAM space 1, size: 2GiB DRAM */
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ bman_fbpr: bman-fbpr {
+ compatible = "shared-dma-pool";
+ size = <0 0x1000000>;
+ alignment = <0 0x1000000>;
+ no-map;
+ };
+
+ qman_fqd: qman-fqd {
+ compatible = "shared-dma-pool";
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ no-map;
+ };
+
+ qman_pfdr: qman-pfdr {
+ compatible = "shared-dma-pool";
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ no-map;
+ };
+ };
+
sysclk: sysclk {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -152,7 +191,7 @@
interrupts = <1 9 0xf08>;
};
- soc {
+ soc: soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
@@ -223,6 +262,7 @@
ifc: ifc@1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
+ big-endian;
interrupts = <0 43 0x4>;
};
@@ -333,6 +373,28 @@
};
};
+ qman: qman@1880000 {
+ compatible = "fsl,qman";
+ reg = <0x0 0x1880000 0x0 0x10000>;
+ interrupts = <0 45 0x4>;
+ memory-region = <&qman_fqd &qman_pfdr>;
+ };
+
+ bman: bman@1890000 {
+ compatible = "fsl,bman";
+ reg = <0x0 0x1890000 0x0 0x10000>;
+ interrupts = <0 45 0x4>;
+ memory-region = <&bman_fbpr>;
+ };
+
+ bportals: bman-portals@508000000 {
+ ranges = <0x0 0x5 0x08000000 0x8000000>;
+ };
+
+ qportals: qman-portals@500000000 {
+ ranges = <0x0 0x5 0x00000000 0x8000000>;
+ };
+
dspi0: dspi@2100000 {
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
@@ -688,3 +750,6 @@
};
};
+
+#include "qoriq-qman-portals.dtsi"
+#include "qoriq-bman-portals.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
new file mode 100644
index 0000000..f5017db
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
@@ -0,0 +1,48 @@
+/*
+ * QorIQ FMan v3 device tree nodes for ls1046
+ *
+ * Copyright 2015-2016 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+&soc {
+
+/* include used FMan blocks */
+#include "qoriq-fman3-0.dtsi"
+#include "qoriq-fman3-0-1g-0.dtsi"
+#include "qoriq-fman3-0-1g-1.dtsi"
+#include "qoriq-fman3-0-1g-2.dtsi"
+#include "qoriq-fman3-0-1g-3.dtsi"
+#include "qoriq-fman3-0-1g-4.dtsi"
+#include "qoriq-fman3-0-1g-5.dtsi"
+#include "qoriq-fman3-0-10g-0.dtsi"
+#include "qoriq-fman3-0-10g-1.dtsi"
+};
+
+&fman0 {
+ /* these aliases provide the FMan ports mapping */
+ enet0: ethernet@e0000 {
+ };
+
+ enet1: ethernet@e2000 {
+ };
+
+ enet2: ethernet@e4000 {
+ };
+
+ enet3: ethernet@e6000 {
+ };
+
+ enet4: ethernet@e8000 {
+ };
+
+ enet5: ethernet@ea000 {
+ };
+
+ enet6: ethernet@f0000 {
+ };
+
+ enet7: ethernet@f2000 {
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index 290e5b0..434383b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -1,7 +1,7 @@
/*
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
- * Copyright 2016, Freescale Semiconductor, Inc.
+ * Copyright 2016 Freescale Semiconductor, Inc.
*
* Shaohui Xie <Shaohui.Xie@nxp.com>
*
@@ -210,3 +210,5 @@
reg = <0>;
};
};
+
+#include "fsl-ls1046-post.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index d1ccc00..5dc2782 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -1,7 +1,7 @@
/*
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
- * Copyright 2016, Freescale Semiconductor, Inc.
+ * Copyright 2016 Freescale Semiconductor, Inc.
*
* Mingkai Hu <mingkai.hu@nxp.com>
*
@@ -72,6 +72,14 @@
status = "okay";
};
+&esdhc {
+ mmc-hs200-1_8v;
+ sd-uhs-sdr104;
+ sd-uhs-sdr50;
+ sd-uhs-sdr25;
+ sd-uhs-sdr12;
+};
+
&i2c0 {
status = "okay";
@@ -148,3 +156,63 @@
reg = <1>;
};
};
+
+#include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+ ethernet@e4000 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&sgmii_phy1>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@ea000 {
+ phy-handle = <&sgmii_phy2>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@f0000 { /* 10GEC1 */
+ phy-handle = <&aqr106_phy>;
+ phy-connection-type = "xgmii";
+ };
+
+ ethernet@f2000 { /* 10GEC2 */
+ fixed-link = <0 1 1000 0 0>;
+ phy-connection-type = "xgmii";
+ };
+
+ mdio@fc000 {
+ rgmii_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+
+ rgmii_phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+
+ sgmii_phy1: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+
+ sgmii_phy2: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+ };
+
+ mdio@fd000 {
+ aqr106_phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 131 4>;
+ reg = <0x0>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index f4b8b7e..dc1640b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -1,7 +1,7 @@
/*
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
- * Copyright 2016, Freescale Semiconductor, Inc.
+ * Copyright 2016 Freescale Semiconductor, Inc.
*
* Mingkai Hu <mingkai.hu@nxp.com>
*
@@ -55,6 +55,15 @@
aliases {
crypto = &crypto;
+ fman0 = &fman0;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ ethernet4 = &enet4;
+ ethernet5 = &enet5;
+ ethernet6 = &enet6;
+ ethernet7 = &enet7;
};
cpus {
@@ -174,7 +183,7 @@
IRQ_TYPE_LEVEL_LOW)>;
};
- soc {
+ soc: soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
@@ -190,6 +199,7 @@
ifc: ifc@1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
+ big-endian;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -209,10 +219,10 @@
};
esdhc: esdhc@1560000 {
- compatible = "fsl,esdhc";
+ compatible = "fsl,ls1046a-esdhc", "fsl,esdhc";
reg = <0x0 0x1560000 0x0 0x10000>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <0>;
+ clocks = <&clockgen 2 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
big-endian;
@@ -268,6 +278,30 @@
};
};
+ qman: qman@1880000 {
+ compatible = "fsl,qman";
+ reg = <0x0 0x1880000 0x0 0x10000>;
+ interrupts = <0 45 0x4>;
+ memory-region = <&qman_fqd &qman_pfdr>;
+
+ };
+
+ bman: bman@1890000 {
+ compatible = "fsl,bman";
+ reg = <0x0 0x1890000 0x0 0x10000>;
+ interrupts = <0 45 0x4>;
+ memory-region = <&bman_fbpr>;
+
+ };
+
+ qportals: qman-portals@500000000 {
+ ranges = <0x0 0x5 0x00000000 0x8000000>;
+ };
+
+ bportals: bman-portals@508000000 {
+ ranges = <0x0 0x5 0x08000000 0x8000000>;
+ };
+
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1046a-dcfg", "syscon";
reg = <0x0 0x1ee0000 0x0 0x10000>;
@@ -567,6 +601,7 @@
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
};
usb1: usb@3000000 {
@@ -575,6 +610,7 @@
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
};
usb2: usb@3100000 {
@@ -583,6 +619,7 @@
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
};
sata: sata@3200000 {
@@ -594,4 +631,34 @@
clocks = <&clockgen 4 1>;
};
};
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ bman_fbpr: bman-fbpr {
+ compatible = "shared-dma-pool";
+ size = <0 0x1000000>;
+ alignment = <0 0x1000000>;
+ no-map;
+ };
+
+ qman_fqd: qman-fqd {
+ compatible = "shared-dma-pool";
+ size = <0 0x800000>;
+ alignment = <0 0x800000>;
+ no-map;
+ };
+
+ qman_pfdr: qman-pfdr {
+ compatible = "shared-dma-pool";
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ no-map;
+ };
+ };
};
+
+#include "qoriq-qman-portals.dtsi"
+#include "qoriq-bman-portals.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 8c3cae5..3012805 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -110,6 +110,30 @@
};
};
+&ifc {
+ ranges = <0 0 0x5 0x80000000 0x08000000
+ 2 0 0x5 0x30000000 0x00010000
+ 3 0 0x5 0x20000000 0x00010000>;
+ status = "okay";
+
+ nor@0,0 {
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@2,0 {
+ compatible = "fsl,ifc-nand";
+ reg = <0x2 0x0 0x10000>;
+ };
+
+ fpga: board-control@3,0 {
+ compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis";
+ reg = <0x3 0x0 0x0000100>;
+ };
+};
+
&duart0 {
status = "okay";
};
@@ -118,6 +142,10 @@
status = "okay";
};
+&esdhc {
+ status = "okay";
+};
+
&sata {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 8a04fbb..213abb7 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -94,6 +94,22 @@
};
};
+&ifc {
+ ranges = <0 0 0x5 0x30000000 0x00010000
+ 2 0 0x5 0x20000000 0x00010000>;
+ status = "okay";
+
+ nand@0,0 {
+ compatible = "fsl,ifc-nand";
+ reg = <0x0 0x0 0x10000>;
+ };
+
+ fpga: board-control@2,0 {
+ compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis";
+ reg = <0x2 0x0 0x0000100>;
+ };
+};
+
&duart0 {
status = "okay";
};
@@ -102,6 +118,10 @@
status = "okay";
};
+&esdhc {
+ status = "okay";
+};
+
&sata {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 2946fd7..c144d06 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -44,6 +44,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "fsl,ls1088a";
@@ -61,6 +62,7 @@
compatible = "arm,cortex-a53";
reg = <0x0>;
clocks = <&clockgen 1 0>;
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
@@ -89,6 +91,7 @@
compatible = "arm,cortex-a53";
reg = <0x100>;
clocks = <&clockgen 1 1>;
+ #cooling-cells = <2>;
};
cpu5: cpu@101 {
@@ -153,6 +156,91 @@
clocks = <&sysclk>;
};
+ tmu: tmu@1f80000 {
+ compatible = "fsl,qoriq-tmu";
+ reg = <0x0 0x1f80000 0x0 0x10000>;
+ interrupts = <0 23 0x4>;
+ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+ fsl,tmu-calibration =
+ /* Calibration data group 1 */
+ <0x00000000 0x00000026
+ 0x00000001 0x0000002d
+ 0x00000002 0x00000032
+ 0x00000003 0x00000039
+ 0x00000004 0x0000003f
+ 0x00000005 0x00000046
+ 0x00000006 0x0000004d
+ 0x00000007 0x00000054
+ 0x00000008 0x0000005a
+ 0x00000009 0x00000061
+ 0x0000000a 0x0000006a
+ 0x0000000b 0x00000071
+ /* Calibration data group 2 */
+ 0x00010000 0x00000025
+ 0x00010001 0x0000002c
+ 0x00010002 0x00000035
+ 0x00010003 0x0000003d
+ 0x00010004 0x00000045
+ 0x00010005 0x0000004e
+ 0x00010006 0x00000057
+ 0x00010007 0x00000061
+ 0x00010008 0x0000006b
+ 0x00010009 0x00000076
+ /* Calibration data group 3 */
+ 0x00020000 0x00000029
+ 0x00020001 0x00000033
+ 0x00020002 0x0000003d
+ 0x00020003 0x00000049
+ 0x00020004 0x00000056
+ 0x00020005 0x00000061
+ 0x00020006 0x0000006d
+ /* Calibration data group 4 */
+ 0x00030000 0x00000021
+ 0x00030001 0x0000002a
+ 0x00030002 0x0000003c
+ 0x00030003 0x0000004e>;
+ little-endian;
+ #thermal-sensor-cells = <1>;
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 0>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu4 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
duart0: serial@21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;
@@ -216,10 +304,6 @@
little-endian;
#address-cells = <2>;
#size-cells = <1>;
-
- ranges = <0 0 0x5 0x80000000 0x08000000
- 2 0 0x5 0x30000000 0x00010000
- 3 0 0x5 0x20000000 0x00010000>;
status = "disabled";
};
@@ -263,11 +347,26 @@
status = "disabled";
};
+ esdhc: esdhc@2140000 {
+ compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
+ reg = <0x0 0x2140000 0x0 0x10000>;
+ interrupts = <0 28 0x4>; /* Level high type */
+ clock-frequency = <0>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ little-endian;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
sata: sata@3200000 {
- compatible = "fsl,ls1088a-ahci", "fsl,ls1043a-ahci";
- reg = <0x0 0x3200000 0x0 0x10000>;
+ compatible = "fsl,ls1088a-ahci";
+ reg = <0x0 0x3200000 0x0 0x10000>,
+ <0x7 0x100520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
+ dma-coherent;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
index c1e76df..ed209cd 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -1,7 +1,8 @@
/*
* Device Tree file for Freescale LS2080a QDS Board.
*
- * Copyright (C) 2015-17, Freescale Semiconductor
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
index 18ad195..67ec3f9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -1,7 +1,8 @@
/*
* Device Tree file for Freescale LS2080a RDB Board.
*
- * Copyright (C) 2016-17, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
index 290604b..3ee718f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
@@ -1,7 +1,7 @@
/*
* Device Tree file for Freescale LS2080a software Simulator model
*
- * Copyright (C) 2014-2015, Freescale Semiconductor
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
*
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
*
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 46a26c0..d789c68 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -1,7 +1,7 @@
/*
* Device Tree Include file for Freescale Layerscape-2080A family SoC.
*
- * Copyright (C) 2014-2016, Freescale Semiconductor
+ * Copyright 2014-2016 Freescale Semiconductor, Inc.
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
index ebcd6ee..4a1df5c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
@@ -1,7 +1,8 @@
/*
* Device Tree file for Freescale LS2088A QDS Board.
*
- * Copyright (C) 2016-17, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
index 5992dc1..a76d4b4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
@@ -1,7 +1,8 @@
/*
* Device Tree file for Freescale LS2088A RDB Board.
*
- * Copyright (C) 2016-17, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
index 33ce404..5c695c6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -1,7 +1,8 @@
/*
* Device Tree Include file for Freescale Layerscape-2088A family SoC.
*
- * Copyright (C) 2016-17, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index 8b62048..b237446 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -1,7 +1,8 @@
/*
* Device Tree file for Freescale LS2080A QDS Board.
*
- * Copyright (C) 2016-17, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
@@ -45,6 +46,7 @@
*/
&esdhc {
+ mmc-hs200-1_8v;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 3737587..9a1d0d2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -1,7 +1,8 @@
/*
* Device Tree file for Freescale LS2080A RDB Board.
*
- * Copyright (C) 2016-17, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index abb2fff..94cdd30 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -1,7 +1,8 @@
/*
* Device Tree Include file for Freescale Layerscape-2080A family SoC.
*
- * Copyright (C) 2016-2017, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
@@ -471,7 +472,7 @@
compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
reg = <0x0 0x2140000 0x0 0x10000>;
interrupts = <0 28 0x4>; /* Level high type */
- clock-frequency = <0>; /* Updated by bootloader */
+ clocks = <&clockgen 4 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
little-endian;
diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
new file mode 100644
index 0000000..c3c2be4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
@@ -0,0 +1,71 @@
+/*
+ * QorIQ BMan Portals device tree
+ *
+ * Copyright 2011-2016 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+&bportals {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+
+ bman-portal@0 {
+ /*
+ * bootloader fix-ups are expected to provide the
+ * "fsl,bman-portal-<hardware revision>" compatible
+ */
+ compatible = "fsl,bman-portal";
+ reg = <0x0 0x4000>, <0x4000000 0x4000>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ bman-portal@10000 {
+ compatible = "fsl,bman-portal";
+ reg = <0x10000 0x4000>, <0x4010000 0x4000>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ bman-portal@20000 {
+ compatible = "fsl,bman-portal";
+ reg = <0x20000 0x4000>, <0x4020000 0x4000>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ bman-portal@30000 {
+ compatible = "fsl,bman-portal";
+ reg = <0x30000 0x4000>, <0x4030000 0x4000>;
+ interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ bman-portal@40000 {
+ compatible = "fsl,bman-portal";
+ reg = <0x40000 0x4000>, <0x4040000 0x4000>;
+ interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ bman-portal@50000 {
+ compatible = "fsl,bman-portal";
+ reg = <0x50000 0x4000>, <0x4050000 0x4000>;
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ bman-portal@60000 {
+ compatible = "fsl,bman-portal";
+ reg = <0x60000 0x4000>, <0x4060000 0x4000>;
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ bman-portal@70000 {
+ compatible = "fsl,bman-portal";
+ reg = <0x70000 0x4000>, <0x4070000 0x4000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ bman-portal@80000 {
+ compatible = "fsl,bman-portal";
+ reg = <0x80000 0x4000>, <0x4080000 0x4000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
new file mode 100644
index 0000000..ecdffe7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
@@ -0,0 +1,42 @@
+/*
+ * QorIQ FMan v3 10g port #0 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x10: port@90000 {
+ cell-index = <0x10>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x90000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ fman0_tx_0x30: port@b0000 {
+ cell-index = <0x30>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xb0000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ ethernet@f0000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-memac";
+ reg = <0xf0000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
+ pcsphy-handle = <&pcsphy6>;
+ };
+
+ mdio@f1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xf1000 0x1000>;
+
+ pcsphy6: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
new file mode 100644
index 0000000..a7f6af5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
@@ -0,0 +1,42 @@
+/*
+ * QorIQ FMan v3 10g port #1 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x11: port@91000 {
+ cell-index = <0x11>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x91000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ fman0_tx_0x31: port@b1000 {
+ cell-index = <0x31>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xb1000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ ethernet@f2000 {
+ cell-index = <0x9>;
+ compatible = "fsl,fman-memac";
+ reg = <0xf2000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>;
+ pcsphy-handle = <&pcsphy7>;
+ };
+
+ mdio@f3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xf3000 0x1000>;
+
+ pcsphy7: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
new file mode 100644
index 0000000..d600786
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ FMan v3 1g port #0 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x08: port@88000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x88000 0x1000>;
+ };
+
+ fman0_tx_0x28: port@a8000 {
+ cell-index = <0x28>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xa8000 0x1000>;
+ };
+
+ ethernet@e0000 {
+ cell-index = <0>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe0000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy0>;
+ };
+
+ mdio@e1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe1000 0x1000>;
+
+ pcsphy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
new file mode 100644
index 0000000..3c0b76d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ FMan v3 1g port #1 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x09: port@89000 {
+ cell-index = <0x9>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x89000 0x1000>;
+ };
+
+ fman0_tx_0x29: port@a9000 {
+ cell-index = <0x29>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xa9000 0x1000>;
+ };
+
+ ethernet@e2000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe2000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy1>;
+ };
+
+ mdio@e3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe3000 0x1000>;
+
+ pcsphy1: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
new file mode 100644
index 0000000..89633af
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ FMan v3 1g port #2 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x0a: port@8a000 {
+ cell-index = <0xa>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x8a000 0x1000>;
+ };
+
+ fman0_tx_0x2a: port@aa000 {
+ cell-index = <0x2a>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xaa000 0x1000>;
+ };
+
+ ethernet@e4000 {
+ cell-index = <2>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe4000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy2>;
+ };
+
+ mdio@e5000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe5000 0x1000>;
+
+ pcsphy2: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
new file mode 100644
index 0000000..87c2b70
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ FMan v3 1g port #3 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x0b: port@8b000 {
+ cell-index = <0xb>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x8b000 0x1000>;
+ };
+
+ fman0_tx_0x2b: port@ab000 {
+ cell-index = <0x2b>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xab000 0x1000>;
+ };
+
+ ethernet@e6000 {
+ cell-index = <3>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe6000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy3>;
+ };
+
+ mdio@e7000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe7000 0x1000>;
+
+ pcsphy3: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
new file mode 100644
index 0000000..8f4d74b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ FMan v3 1g port #4 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x0c: port@8c000 {
+ cell-index = <0xc>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x8c000 0x1000>;
+ };
+
+ fman0_tx_0x2c: port@ac000 {
+ cell-index = <0x2c>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xac000 0x1000>;
+ };
+
+ ethernet@e8000 {
+ cell-index = <4>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe8000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy4>;
+ };
+
+ mdio@e9000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe9000 0x1000>;
+
+ pcsphy4: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
new file mode 100644
index 0000000..d534f77
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ FMan v3 1g port #5 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x0d: port@8d000 {
+ cell-index = <0xd>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x8d000 0x1000>;
+ };
+
+ fman0_tx_0x2d: port@ad000 {
+ cell-index = <0x2d>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xad000 0x1000>;
+ };
+
+ ethernet@ea000 {
+ cell-index = <5>;
+ compatible = "fsl,fman-memac";
+ reg = <0xea000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy5>;
+ };
+
+ mdio@eb000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xeb000 0x1000>;
+
+ pcsphy5: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
new file mode 100644
index 0000000..4dd0676
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
@@ -0,0 +1,81 @@
+/*
+ * QorIQ FMan v3 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman0: fman@1a00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ compatible = "fsl,fman";
+ ranges = <0x0 0x0 0x1a00000 0x100000>;
+ reg = <0x0 0x1a00000 0x0 0x100000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 3 0>;
+ clock-names = "fmanclk";
+ fsl,qman-channel-range = <0x800 0x10>;
+
+ muram@0 {
+ compatible = "fsl,fman-muram";
+ reg = <0x0 0x60000>;
+ };
+
+ fman0_oh_0x2: port@82000 {
+ cell-index = <0x2>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x82000 0x1000>;
+ };
+
+ fman0_oh_0x3: port@83000 {
+ cell-index = <0x3>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x83000 0x1000>;
+ };
+
+ fman0_oh_0x4: port@84000 {
+ cell-index = <0x4>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x84000 0x1000>;
+ };
+
+ fman0_oh_0x5: port@85000 {
+ cell-index = <0x5>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x85000 0x1000>;
+ };
+
+ fman0_oh_0x6: port@86000 {
+ cell-index = <0x6>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x86000 0x1000>;
+ };
+
+ fman0_oh_0x7: port@87000 {
+ cell-index = <0x7>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x87000 0x1000>;
+ };
+
+ mdio0: mdio@fc000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xfc000 0x1000>;
+ };
+
+ xmdio0: mdio@fd000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xfd000 0x1000>;
+ };
+
+ ptp_timer0: ptp-timer@fe000 {
+ compatible = "fsl,fman-ptp-timer";
+ reg = <0xfe000 0x1000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
new file mode 100644
index 0000000..2a9aa06
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
@@ -0,0 +1,80 @@
+/*
+ * QorIQ QMan Portals device tree
+ *
+ * Copyright 2011-2016 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+&qportals {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+
+ qportal0: qman-portal@0 {
+ /*
+ * bootloader fix-ups are expected to provide the
+ * "fsl,bman-portal-<hardware revision>" compatible
+ */
+ compatible = "fsl,qman-portal";
+ reg = <0x0 0x4000>, <0x4000000 0x4000>;
+ interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+ cell-index = <0>;
+ };
+
+ qportal1: qman-portal@10000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x10000 0x4000>, <0x4010000 0x4000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ cell-index = <1>;
+ };
+
+ qportal2: qman-portal@20000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x20000 0x4000>, <0x4020000 0x4000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ cell-index = <2>;
+ };
+
+ qportal3: qman-portal@30000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x30000 0x4000>, <0x4030000 0x4000>;
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ cell-index = <3>;
+ };
+
+ qportal4: qman-portal@40000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x40000 0x4000>, <0x4040000 0x4000>;
+ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+ cell-index = <4>;
+ };
+
+ qportal5: qman-portal@50000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x50000 0x4000>, <0x4050000 0x4000>;
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+ cell-index = <5>;
+ };
+
+ qportal6: qman-portal@60000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x60000 0x4000>, <0x4060000 0x4000>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ cell-index = <6>;
+ };
+
+ qportal7: qman-portal@70000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x70000 0x4000>, <0x4070000 0x4000>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ cell-index = <7>;
+ };
+
+ qportal8: qman-portal@80000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x80000 0x4000>, <0x4080000 0x4000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ cell-index = <8>;
+ };
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 186251f..6609b0f 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -9,17 +9,28 @@
#include "hi3660.dtsi"
#include "hikey960-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "HiKey960";
- compatible = "hisilicon,hi3660";
+ compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
aliases {
- serial5 = &uart5; /* console UART */
+ mshc1 = &dwmmc1;
+ mshc2 = &dwmmc2;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ serial6 = &uart6;
};
chosen {
- stdout-path = "serial5:115200n8";
+ stdout-path = "serial6:115200n8";
};
memory@0 {
@@ -27,8 +38,206 @@
/* rewrite this at bootloader */
reg = <0x0 0x0 0x0 0x0>;
};
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>;
+
+ power {
+ wakeup-source;
+ gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+ label = "GPIO Power";
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user_led1 {
+ label = "user_led1";
+ /* gpio_150_user_led1 */
+ gpios = <&gpio18 6 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ user_led2 {
+ label = "user_led2";
+ /* gpio_151_user_led2 */
+ gpios = <&gpio18 7 0>;
+ linux,default-trigger = "mmc0";
+ };
+
+ user_led3 {
+ label = "user_led3";
+ /* gpio_189_user_led3 */
+ gpios = <&gpio23 5 0>;
+ default-state = "off";
+ };
+
+ user_led4 {
+ label = "user_led4";
+ /* gpio_190_user_led4 */
+ gpios = <&gpio23 6 0>;
+ linux,default-trigger = "cpu0";
+ };
+
+ wlan_active_led {
+ label = "wifi_active";
+ /* gpio_205_wifi_active */
+ gpios = <&gpio25 5 0>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+
+ bt_active_led {
+ label = "bt_active";
+ gpios = <&gpio25 7 0>;
+ /* gpio_207_user_led1 */
+ linux,default-trigger = "hci0-power";
+ default-state = "off";
+ };
+ };
+
+ pmic: pmic@fff34000 {
+ compatible = "hisilicon,hi6421v530-pmic";
+ reg = <0x0 0xfff34000 0x0 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ regulators {
+ ldo3: LDO3 { /* HDMI */
+ regulator-name = "VOUT3_1V85";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo9: LDO9 { /* SDCARD I/O */
+ regulator-name = "VOUT9_1V8_2V95";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ ldo11: LDO11 { /* Low Speed Connector */
+ regulator-name = "VOUT11_1V8_2V95";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ ldo15: LDO15 { /* UFS VCC */
+ regulator-name = "VOUT15_3V0";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo16: LDO16 { /* SD VDD */
+ regulator-name = "VOUT16_2V95";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <360>;
+ };
+ };
+ };
+
+ wlan_en: wlan-en-1-8v {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ /* GPIO_051_WIFI_EN */
+ gpio = <&gpio6 3 0>;
+
+ /* WLAN card specific delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
};
-&uart5 {
+&i2c0 {
+ /* On Low speed expansion */
+ label = "LS-I2C0";
status = "okay";
};
+
+&i2c1 {
+ status = "okay";
+
+ adv7533: adv7533@39 {
+ status = "ok";
+ compatible = "adi,adv7533";
+ reg = <0x39>;
+ };
+};
+
+&i2c7 {
+ /* On Low speed expansion */
+ label = "LS-I2C1";
+ status = "okay";
+};
+
+&uart3 {
+ /* On Low speed expansion */
+ label = "LS-UART0";
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "ti,wl1837-st";
+ enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>;
+ max-speed = <921600>;
+ };
+};
+
+&uart6 {
+ /* On Low speed expansion */
+ label = "LS-UART1";
+ status = "okay";
+};
+
+&spi2 {
+ /* On Low speed expansion */
+ label = "LS-SPI0";
+ status = "okay";
+};
+
+&spi3 {
+ /* On High speed expansion */
+ label = "HS-SPI1";
+ status = "okay";
+};
+
+&dwmmc1 {
+ vmmc-supply = <&ldo16>;
+ vqmmc-supply = <&ldo9>;
+ status = "okay";
+};
+
+&dwmmc2 { /* WIFI */
+ broken-cd;
+ /* WL_EN */
+ vmmc-supply = <&wlan_en>;
+ ti,non-removable;
+ non-removable;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "ok";
+
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1837";
+ reg = <2>; /* sdio func num */
+ /* WL_IRQ, GPIO_179_WL_WAKEUP_AP */
+ interrupt-parent = <&gpio22>;
+ interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+ };
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 3983086..c6a1961 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -5,6 +5,7 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/hi3660-clock.h>
/ {
compatible = "hisilicon,hi3660";
@@ -141,19 +142,710 @@
#size-cells = <2>;
ranges;
- fixed_uart5: fixed_19_2M {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
- clock-output-names = "fixed:uart5";
+ crg_ctrl: crg_ctrl@fff35000 {
+ compatible = "hisilicon,hi3660-crgctrl", "syscon";
+ reg = <0x0 0xfff35000 0x0 0x1000>;
+ #clock-cells = <1>;
};
- uart5: uart@fdf05000 {
+ crg_rst: crg_rst_controller {
+ compatible = "hisilicon,hi3660-reset";
+ #reset-cells = <2>;
+ hisi,rst-syscon = <&crg_ctrl>;
+ };
+
+
+ pctrl: pctrl@e8a09000 {
+ compatible = "hisilicon,hi3660-pctrl", "syscon";
+ reg = <0x0 0xe8a09000 0x0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ pmuctrl: crg_ctrl@fff34000 {
+ compatible = "hisilicon,hi3660-pmuctrl", "syscon";
+ reg = <0x0 0xfff34000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ sctrl: sctrl@fff0a000 {
+ compatible = "hisilicon,hi3660-sctrl", "syscon";
+ reg = <0x0 0xfff0a000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ iomcu: iomcu@ffd7e000 {
+ compatible = "hisilicon,hi3660-iomcu", "syscon";
+ reg = <0x0 0xffd7e000 0x0 0x1000>;
+ #clock-cells = <1>;
+
+ };
+
+ iomcu_rst: reset {
+ compatible = "hisilicon,hi3660-reset";
+ hisi,rst-syscon = <&iomcu>;
+ #reset-cells = <2>;
+ };
+
+ dual_timer0: timer@fff14000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x0 0xfff14000 0x0 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_OSC32K>,
+ <&crg_ctrl HI3660_OSC32K>,
+ <&crg_ctrl HI3660_OSC32K>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ };
+
+ i2c0: i2c@ffd71000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xffd71000 0x0 0x1000>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>;
+ resets = <&iomcu_rst 0x20 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ffd72000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xffd72000 0x0 0x1000>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_I2C1>;
+ resets = <&iomcu_rst 0x20 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@fdf0c000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xfdf0c000 0x0 0x1000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_I2C3>;
+ resets = <&crg_rst 0x78 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pmx_func &i2c3_cfg_func>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@fdf0b000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xfdf0b000 0x0 0x1000>;
+ interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_I2C7>;
+ resets = <&crg_rst 0x60 14>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7_pmx_func &i2c7_cfg_func>;
+ status = "disabled";
+ };
+
+ uart0: serial@fdf02000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf02000 0x0 0x1000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>,
+ <&crg_ctrl HI3660_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
+ status = "disabled";
+ };
+
+ uart1: serial@fdf00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf00000 0x0 0x1000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>,
+ <&crg_ctrl HI3660_CLK_GATE_UART1>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
+ status = "disabled";
+ };
+
+ uart2: serial@fdf03000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf03000 0x0 0x1000>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>,
+ <&crg_ctrl HI3660_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
+ status = "disabled";
+ };
+
+ uart3: serial@ffd74000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xffd74000 0x0 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_FACTOR_UART3>,
+ <&crg_ctrl HI3660_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+ status = "disabled";
+ };
+
+ uart4: serial@fdf01000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf01000 0x0 0x1000>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>,
+ <&crg_ctrl HI3660_CLK_GATE_UART4>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
+ status = "disabled";
+ };
+
+ uart5: serial@fdf05000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf05000 0x0 0x1000>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&fixed_uart5 &fixed_uart5>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>,
+ <&crg_ctrl HI3660_CLK_GATE_UART5>;
clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5_pmx_func &uart5_cfg_func>;
+ status = "disabled";
+ };
+
+ uart6: serial@fff32000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfff32000 0x0 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_UART6>,
+ <&crg_ctrl HI3660_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart6_pmx_func &uart6_cfg_func>;
+ status = "disabled";
+ };
+
+ rtc0: rtc@fff04000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x0 0Xfff04000 0x0 0x1000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio0: gpio@e8a0b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a0b000 0 0x1000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 1 0 7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO0>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio1: gpio@e8a0c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a0c000 0 0x1000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 1 7 7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO1>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio2: gpio@e8a0d000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a0d000 0 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 14 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO2>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio3: gpio@e8a0e000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a0e000 0 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 22 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO3>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio4: gpio@e8a0f000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a0f000 0 0x1000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 30 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO4>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio5: gpio@e8a10000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a10000 0 0x1000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 38 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO5>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio6: gpio@e8a11000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a11000 0 0x1000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 46 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO6>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio7: gpio@e8a12000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a12000 0 0x1000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 54 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO7>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio8: gpio@e8a13000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a13000 0 0x1000>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 62 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO8>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio9: gpio@e8a14000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a14000 0 0x1000>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 70 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO9>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio10: gpio@e8a15000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a15000 0 0x1000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 78 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO10>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio11: gpio@e8a16000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a16000 0 0x1000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 86 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO11>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio12: gpio@e8a17000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a17000 0 0x1000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 94 3 &pmx0 7 101 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO12>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio13: gpio@e8a18000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a18000 0 0x1000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 102 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO13>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio14: gpio@e8a19000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a19000 0 0x1000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 110 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO14>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio15: gpio@e8a1a000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a1a000 0 0x1000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 118 6>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO15>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio16: gpio@e8a1b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a1b000 0 0x1000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO16>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio17: gpio@e8a1c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a1c000 0 0x1000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO17>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio18: gpio@ff3b4000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xff3b4000 0 0x1000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx2 0 0 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO18>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio19: gpio@ff3b5000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xff3b5000 0 0x1000>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx2 0 8 4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO19>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio20: gpio@e8a1f000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a1f000 0 0x1000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx1 0 0 6>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO20>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio21: gpio@e8a20000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xe8a20000 0 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&pmx3 0 0 6>;
+ clocks = <&crg_ctrl HI3660_PCLK_GPIO21>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio22: gpio@fff0b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xfff0b000 0 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO176 */
+ gpio-ranges = <&pmx4 2 0 6>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3660_PCLK_AO_GPIO0>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio23: gpio@fff0c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xfff0c000 0 0x1000>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO184 */
+ gpio-ranges = <&pmx4 0 6 7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3660_PCLK_AO_GPIO1>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio24: gpio@fff0d000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xfff0d000 0 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO192 */
+ gpio-ranges = <&pmx4 0 13 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3660_PCLK_AO_GPIO2>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio25: gpio@fff0e000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xfff0e000 0 0x1000>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO200 */
+ gpio-ranges = <&pmx4 0 21 4 &pmx4 5 25 3>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3660_PCLK_AO_GPIO3>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio26: gpio@fff0f000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xfff0f000 0 0x1000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO208 */
+ gpio-ranges = <&pmx4 0 28 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3660_PCLK_AO_GPIO4>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio27: gpio@fff10000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xfff10000 0 0x1000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* GPIO216 */
+ gpio-ranges = <&pmx4 0 36 6>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3660_PCLK_AO_GPIO5>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio28: gpio@fff1d000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0 0xfff1d000 0 0x1000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&sctrl HI3660_PCLK_AO_GPIO6>;
+ clock-names = "apb_pclk";
+ };
+
+ spi2: spi@ffd68000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x0 0xffd68000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_SPI2>;
+ clock-names = "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pmx_func>;
+ num-cs = <1>;
+ cs-gpios = <&gpio27 2 0>;
+ status = "disabled";
+ };
+
+ spi3: spi@ff3b3000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x0 0xff3b3000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_SPI3>;
+ clock-names = "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_pmx_func>;
+ num-cs = <1>;
+ cs-gpios = <&gpio18 5 0>;
+ status = "disabled";
+ };
+
+ pcie@f4000000 {
+ compatible = "hisilicon,kirin960-pcie";
+ reg = <0x0 0xf4000000 0x0 0x1000>,
+ <0x0 0xff3fe000 0x0 0x1000>,
+ <0x0 0xf3f20000 0x0 0x40000>,
+ <0x0 0xf5000000 0x0 0x2000>;
+ reg-names = "dbi", "apb", "phy", "config";
+ bus-range = <0x0 0x1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0x00000000
+ 0x0 0xf6000000
+ 0x0 0x02000000>;
+ num-lanes = <1>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0x0 0 0 1
+ &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0 0 0 2
+ &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0 0 0 3
+ &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0 0 0 4
+ &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+ <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+ <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+ <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+ <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+ clock-names = "pcie_phy_ref", "pcie_aux",
+ "pcie_apb_phy", "pcie_apb_sys",
+ "pcie_aclk";
+ reset-gpios = <&gpio11 1 0 >;
+ };
+
+ /* SD */
+ dwmmc1: dwmmc1@ff37f000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cd-inverted;
+ compatible = "hisilicon,hi3660-dw-mshc";
+ num-slots = <1>;
+ bus-width = <0x4>;
+ disable-wp;
+ cap-sd-highspeed;
+ supports-highspeed;
+ card-detect-delay = <200>;
+ reg = <0x0 0xff37f000 0x0 0x1000>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_SD>,
+ <&crg_ctrl HI3660_HCLK_GATE_SD>;
+ clock-names = "ciu", "biu";
+ clock-frequency = <3200000>;
+ resets = <&crg_rst 0x94 18>;
+ cd-gpios = <&gpio25 3 0>;
+ hisilicon,peripheral-syscon = <&sctrl>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_pmx_func
+ &sd_clk_cfg_func
+ &sd_cfg_func>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "disabled";
+
+ slot@0 {
+ reg = <0x0>;
+ bus-width = <4>;
+ disable-wp;
+ };
+ };
+
+ /* SDIO */
+ dwmmc2: dwmmc2@ff3ff000 {
+ compatible = "hisilicon,hi3660-dw-mshc";
+ reg = <0x0 0xff3ff000 0x0 0x1000>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ num-slots = <1>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_SDIO0>,
+ <&crg_ctrl HI3660_HCLK_GATE_SDIO0>;
+ clock-names = "ciu", "biu";
+ resets = <&crg_rst 0x94 20>;
+ card-detect-delay = <200>;
+ supports-highspeed;
+ keep-power-in-suspend;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio_pmx_func
+ &sdio_clk_cfg_func
+ &sdio_cfg_func>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 49f6a62..afae4de 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -466,6 +466,11 @@
method = "smc";
};
};
+
+ sound_card {
+ compatible = "audio-graph-card";
+ dais = <&i2s0_port0>;
+ };
};
&uart2 {
@@ -506,10 +511,33 @@
interrupts = <1 2>;
pd-gpio = <&gpio0 4 0>;
adi,dsi-lanes = <4>;
+ #sound-dai-cells = <0>;
- port {
- adv7533_in: endpoint {
- remote-endpoint = <&dsi_out0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ adv7533_in: endpoint {
+ remote-endpoint = <&dsi_out0>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ codec_endpoint: endpoint {
+ remote-endpoint = <&i2s0_cpu_endpoint>;
+ };
+ };
+ };
+ };
+};
+
+&i2s0 {
+
+ ports {
+ i2s0_port0: port@0 {
+ i2s0_cpu_endpoint: endpoint {
+ remote-endpoint = <&codec_endpoint>;
+ dai-format = "i2s";
};
};
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 6b82695..eacbe0d 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -332,6 +332,19 @@
status = "disabled";
};
+ dma0: dma@f7370000 {
+ compatible = "hisilicon,k3-dma-1.0";
+ reg = <0x0 0xf7370000 0x0 0x1000>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ dma-requests = <32>;
+ interrupts = <0 84 4>;
+ clocks = <&sys_ctrl HI6220_EDMAC_ACLK>;
+ dma-no-cci;
+ dma-type = "hi6220_dma";
+ status = "ok";
+ };
+
dual_timer0: timer@f8008000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x0 0xf8008000 0x0 0x1000>;
@@ -805,6 +818,19 @@
#thermal-sensor-cells = <1>;
};
+ i2s0: i2s@f7118000{
+ compatible = "hisilicon,hi6210-i2s";
+ reg = <0x0 0xf7118000 0x0 0x8000>; /* i2s unit */
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* 155 "DigACodec_intr"-32 */
+ clocks = <&sys_ctrl HI6220_DACODEC_PCLK>,
+ <&sys_ctrl HI6220_BBPPLL0_DIV>;
+ clock-names = "dacodec", "i2s-base";
+ dmas = <&dma0 15 &dma0 14>;
+ dma-names = "rx", "tx";
+ hisilicon,sysctrl-syscon = <&sys_ctrl>;
+ #sound-dai-cells = <1>;
+ };
+
thermal-zones {
cls0: cls0 {
diff --git a/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi
index 719c4bc..7e542d28 100644
--- a/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi
@@ -24,6 +24,27 @@
&range 0 7 0
&range 8 116 0>;
+ pmu_pmx_func: pmu_pmx_func {
+ pinctrl-single,pins = <
+ 0x008 MUX_M1 /* PMU1_SSI */
+ 0x00c MUX_M1 /* PMU2_SSI */
+ 0x010 MUX_M1 /* PMU_CLKOUT */
+ 0x100 MUX_M1 /* PMU_HKADC_SSI */
+ >;
+ };
+
+ csi0_pwd_n_pmx_func: csi0_pwd_n_pmx_func {
+ pinctrl-single,pins = <
+ 0x044 MUX_M0 /* CSI0_PWD_N */
+ >;
+ };
+
+ csi1_pwd_n_pmx_func: csi1_pwd_n_pmx_func {
+ pinctrl-single,pins = <
+ 0x04c MUX_M0 /* CSI1_PWD_N */
+ >;
+ };
+
isp0_pmx_func: isp0_pmx_func {
pinctrl-single,pins = <
0x058 MUX_M1 /* ISP_CLK0 */
@@ -40,6 +61,12 @@
>;
};
+ pwr_key_pmx_func: pwr_key_pmx_func {
+ pinctrl-single,pins = <
+ 0x080 MUX_M0 /* GPIO_034 */
+ >;
+ };
+
i2c3_pmx_func: i2c3_pmx_func {
pinctrl-single,pins = <
0x02c MUX_M1 /* I2C3_SCL */
@@ -67,21 +94,10 @@
>;
};
- spi1_pmx_func: spi1_pmx_func {
- pinctrl-single,pins = <
- 0x034 MUX_M1 /* SPI1_CLK */
- 0x038 MUX_M1 /* SPI1_DI */
- 0x03c MUX_M1 /* SPI1_DO */
- 0x040 MUX_M1 /* SPI1_CS_N */
- >;
- };
-
uart0_pmx_func: uart0_pmx_func {
pinctrl-single,pins = <
0x0cc MUX_M2 /* UART0_RXD */
0x0d0 MUX_M2 /* UART0_TXD */
- 0x0d4 MUX_M2 /* UART0_RXD_M */
- 0x0d8 MUX_M2 /* UART0_TXD_M */
>;
};
@@ -138,6 +154,18 @@
0x0d8 MUX_M1 /* UART6_TXD */
>;
};
+
+ cam0_rst_pmx_func: cam0_rst_pmx_func {
+ pinctrl-single,pins = <
+ 0x0c8 MUX_M0 /* CAM0_RST */
+ >;
+ };
+
+ cam1_rst_pmx_func: cam1_rst_pmx_func {
+ pinctrl-single,pins = <
+ 0x124 MUX_M0 /* CAM1_RST */
+ >;
+ };
};
/* [IOMG_MMC0_000, IOMG_MMC0_005] */
@@ -174,6 +202,13 @@
/* pin base, nr pins & gpio function */
pinctrl-single,gpio-range = <&range 0 12 0>;
+ ufs_pmx_func: ufs_pmx_func {
+ pinctrl-single,pins = <
+ 0x000 MUX_M1 /* UFS_REF_CLK */
+ 0x004 MUX_M1 /* UFS_RST_N */
+ >;
+ };
+
spi3_pmx_func: spi3_pmx_func {
pinctrl-single,pins = <
0x008 MUX_M1 /* SPI3_CLK */
@@ -248,13 +283,6 @@
>;
};
- i2c2_pmx_func: i2c2_pmx_func {
- pinctrl-single,pins = <
- 0x024 MUX_M1 /* I2C2_SCL */
- 0x028 MUX_M1 /* I2C2_SDA */
- >;
- };
-
i2c7_pmx_func: i2c7_pmx_func {
pinctrl-single,pins = <
0x024 MUX_M3 /* I2C7_SCL */
@@ -262,6 +290,13 @@
>;
};
+ pcie_pmx_func: pcie_pmx_func {
+ pinctrl-single,pins = <
+ 0x084 MUX_M1 /* PCIE_CLKREQ_N */
+ 0x088 MUX_M1 /* PCIE_WAKE_N */
+ >;
+ };
+
spi2_pmx_func: spi2_pmx_func {
pinctrl-single,pins = <
0x08c MUX_M1 /* SPI2_CLK */
@@ -271,15 +306,6 @@
>;
};
- spi4_pmx_func: spi4_pmx_func {
- pinctrl-single,pins = <
- 0x08c MUX_M4 /* SPI4_CLK */
- 0x090 MUX_M4 /* SPI4_DI */
- 0x094 MUX_M4 /* SPI4_DO */
- 0x098 MUX_M4 /* SPI4_CS0_N */
- >;
- };
-
i2s0_pmx_func: i2s0_pmx_func {
pinctrl-single,pins = <
0x034 MUX_M1 /* I2S0_DI */
@@ -290,13 +316,433 @@
};
};
- pmx5: pinmux@ff3fd800 {
+ pmx5: pinmux@e896c800 {
+ compatible = "pinconf-single";
+ reg = <0x0 0xe896c800 0x0 0x200>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <0x20>;
+
+ pmu_cfg_func: pmu_cfg_func {
+ pinctrl-single,pins = <
+ 0x010 0x0 /* PMU1_SSI */
+ 0x014 0x0 /* PMU2_SSI */
+ 0x018 0x0 /* PMU_CLKOUT */
+ 0x10c 0x0 /* PMU_HKADC_SSI */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_06MA DRIVE6_MASK
+ >;
+ };
+
+ i2c3_cfg_func: i2c3_cfg_func {
+ pinctrl-single,pins = <
+ 0x038 0x0 /* I2C3_SCL */
+ 0x03c 0x0 /* I2C3_SDA */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ csi0_pwd_n_cfg_func: csi0_pwd_n_cfg_func {
+ pinctrl-single,pins = <
+ 0x050 0x0 /* CSI0_PWD_N */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+
+ csi1_pwd_n_cfg_func: csi1_pwd_n_cfg_func {
+ pinctrl-single,pins = <
+ 0x058 0x0 /* CSI1_PWD_N */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+
+ isp0_cfg_func: isp0_cfg_func {
+ pinctrl-single,pins = <
+ 0x064 0x0 /* ISP_CLK0 */
+ 0x070 0x0 /* ISP_SCL0 */
+ 0x074 0x0 /* ISP_SDA0 */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK>;
+ };
+
+ isp1_cfg_func: isp1_cfg_func {
+ pinctrl-single,pins = <
+ 0x068 0x0 /* ISP_CLK1 */
+ 0x078 0x0 /* ISP_SCL1 */
+ 0x07c 0x0 /* ISP_SDA1 */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+
+ pwr_key_cfg_func: pwr_key_cfg_func {
+ pinctrl-single,pins = <
+ 0x08c 0x0 /* GPIO_034 */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ uart1_cfg_func: uart1_cfg_func {
+ pinctrl-single,pins = <
+ 0x0b4 0x0 /* UART1_RXD */
+ 0x0b8 0x0 /* UART1_TXD */
+ 0x0bc 0x0 /* UART1_CTS_N */
+ 0x0c0 0x0 /* UART1_RTS_N */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ uart2_cfg_func: uart2_cfg_func {
+ pinctrl-single,pins = <
+ 0x0c8 0x0 /* UART2_CTS_N */
+ 0x0cc 0x0 /* UART2_RTS_N */
+ 0x0d0 0x0 /* UART2_TXD */
+ 0x0d4 0x0 /* UART2_RXD */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ uart5_cfg_func: uart5_cfg_func {
+ pinctrl-single,pins = <
+ 0x0c8 0x0 /* UART5_RXD */
+ 0x0cc 0x0 /* UART5_TXD */
+ 0x0d0 0x0 /* UART5_CTS_N */
+ 0x0d4 0x0 /* UART5_RTS_N */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ cam0_rst_cfg_func: cam0_rst_cfg_func {
+ pinctrl-single,pins = <
+ 0x0d4 0x0 /* CAM0_RST */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+
+ uart0_cfg_func: uart0_cfg_func {
+ pinctrl-single,pins = <
+ 0x0d8 0x0 /* UART0_RXD */
+ 0x0dc 0x0 /* UART0_TXD */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ uart6_cfg_func: uart6_cfg_func {
+ pinctrl-single,pins = <
+ 0x0d8 0x0 /* UART6_CTS_N */
+ 0x0dc 0x0 /* UART6_RTS_N */
+ 0x0e0 0x0 /* UART6_RXD */
+ 0x0e4 0x0 /* UART6_TXD */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ uart3_cfg_func: uart3_cfg_func {
+ pinctrl-single,pins = <
+ 0x0e8 0x0 /* UART3_CTS_N */
+ 0x0ec 0x0 /* UART3_RTS_N */
+ 0x0f0 0x0 /* UART3_RXD */
+ 0x0f4 0x0 /* UART3_TXD */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ uart4_cfg_func: uart4_cfg_func {
+ pinctrl-single,pins = <
+ 0x0f8 0x0 /* UART4_CTS_N */
+ 0x0fc 0x0 /* UART4_RTS_N */
+ 0x100 0x0 /* UART4_RXD */
+ 0x104 0x0 /* UART4_TXD */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ cam1_rst_cfg_func: cam1_rst_cfg_func {
+ pinctrl-single,pins = <
+ 0x130 0x0 /* CAM1_RST */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_04MA DRIVE6_MASK
+ >;
+ };
+ };
+
+ pmx6: pinmux@ff3b6800 {
+ compatible = "pinconf-single";
+ reg = <0x0 0xff3b6800 0x0 0x18>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <0x20>;
+
+ ufs_cfg_func: ufs_cfg_func {
+ pinctrl-single,pins = <
+ 0x000 0x0 /* UFS_REF_CLK */
+ 0x004 0x0 /* UFS_RST_N */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_08MA DRIVE6_MASK
+ >;
+ };
+
+ spi3_cfg_func: spi3_cfg_func {
+ pinctrl-single,pins = <
+ 0x008 0x0 /* SPI3_CLK */
+ 0x0 /* SPI3_DI */
+ 0x010 0x0 /* SPI3_DO */
+ 0x014 0x0 /* SPI3_CS0_N */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+ };
+
+ pmx7: pinmux@ff3fd800 {
compatible = "pinconf-single";
reg = <0x0 0xff3fd800 0x0 0x18>;
#pinctrl-cells = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- pinctrl-single,register-width = <32>;
+ pinctrl-single,register-width = <0x20>;
sdio_clk_cfg_func: sdio_clk_cfg_func {
pinctrl-single,pins = <
@@ -315,8 +761,7 @@
PULL_UP
>;
pinctrl-single,drive-strength = <
- DRIVE6_32MA
- DRIVE6_MASK
+ DRIVE6_32MA DRIVE6_MASK
>;
};
@@ -341,19 +786,16 @@
PULL_UP
>;
pinctrl-single,drive-strength = <
- DRIVE6_19MA
- DRIVE6_MASK
+ DRIVE6_19MA DRIVE6_MASK
>;
};
};
- pmx6: pinmux@ff37e800 {
+ pmx8: pinmux@ff37e800 {
compatible = "pinconf-single";
reg = <0x0 0xff37e800 0x0 0x18>;
#pinctrl-cells = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- pinctrl-single,register-width = <32>;
+ pinctrl-single,register-width = <0x20>;
sd_clk_cfg_func: sd_clk_cfg_func {
pinctrl-single,pins = <
@@ -403,5 +845,215 @@
>;
};
};
+
+ pmx9: pinmux@fff11800 {
+ compatible = "pinconf-single";
+ reg = <0x0 0xfff11800 0x0 0xbc>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <0x20>;
+
+ i2c0_cfg_func: i2c0_cfg_func {
+ pinctrl-single,pins = <
+ 0x01c 0x0 /* I2C0_SCL */
+ 0x020 0x0 /* I2C0_SDA */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ i2c1_cfg_func: i2c1_cfg_func {
+ pinctrl-single,pins = <
+ 0x024 0x0 /* I2C1_SCL */
+ 0x028 0x0 /* I2C1_SDA */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ i2c7_cfg_func: i2c7_cfg_func {
+ pinctrl-single,pins = <
+ 0x02c 0x0 /* I2C7_SCL */
+ 0x030 0x0 /* I2C7_SDA */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ slimbus_cfg_func: slimbus_cfg_func {
+ pinctrl-single,pins = <
+ 0x034 0x0 /* SLIMBUS_CLK */
+ 0x038 0x0 /* SLIMBUS_DATA */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ i2s0_cfg_func: i2s0_cfg_func {
+ pinctrl-single,pins = <
+ 0x040 0x0 /* I2S0_DI */
+ 0x044 0x0 /* I2S0_DO */
+ 0x048 0x0 /* I2S0_XCLK */
+ 0x04c 0x0 /* I2S0_XFS */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ i2s2_cfg_func: i2s2_cfg_func {
+ pinctrl-single,pins = <
+ 0x050 0x0 /* I2S2_DI */
+ 0x054 0x0 /* I2S2_DO */
+ 0x058 0x0 /* I2S2_XCLK */
+ 0x05c 0x0 /* I2S2_XFS */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ pcie_cfg_func: pcie_cfg_func {
+ pinctrl-single,pins = <
+ 0x094 0x0 /* PCIE_CLKREQ_N */
+ 0x098 0x0 /* PCIE_WAKE_N */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ spi2_cfg_func: spi2_cfg_func {
+ pinctrl-single,pins = <
+ 0x09c 0x0 /* SPI2_CLK */
+ 0x0a0 0x0 /* SPI2_DI */
+ 0x0a4 0x0 /* SPI2_DO */
+ 0x0a8 0x0 /* SPI2_CS0_N */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+
+ usb_cfg_func: usb_cfg_func {
+ pinctrl-single,pins = <
+ 0x0ac 0x0 /* GPIO_219 */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE7_02MA DRIVE6_MASK
+ >;
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index a89855f..9df0f06 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -42,6 +42,10 @@
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * This file is compatible with the version 1.4 and the version 2.0 of
+ * the board, however the CON numbers are different between the 2
+ * version
*/
/dts-v1/;
@@ -76,6 +80,36 @@
compatible = "usb-nop-xceiv";
vcc-supply = <&exp_usb3_vbus>;
};
+
+ vcc_sd_reg1: regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "vcc_sd1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ enable-active-high;
+ };
+};
+
+/* Gigabit module on CON19(V2.0)/CON21(V1.4) */
+ð0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii-id";
+ phy = <&phy0>;
+ status = "okay";
+};
+
+/* Gigabit module on CON18(V2.0)/CON20(V1.4) */
+ð1 {
+ phy-mode = "sgmii";
+ phy = <&phy1>;
+ status = "okay";
};
&i2c0 {
@@ -108,11 +142,46 @@
};
};
+&mdio {
+ status = "okay";
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+/* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */
+&pcie0 {
+ status = "okay";
+};
+
/* CON3 */
&sata {
status = "okay";
};
+&sdhci0 {
+ non-removable;
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ marvell,pad-type = "fixed-1-8v";
+ status = "okay";
+};
+
+/* SD slot module on CON14(V2.0)/CON15(V1.4) */
+&sdhci1 {
+ wp-inverted;
+ cd-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ marvell,pad-type = "sd";
+ vqmmc-supply = <&vcc_sd_reg1>;
+ status = "okay";
+};
+
&spi0 {
status = "okay";
pinctrl-names = "default";
@@ -145,60 +214,23 @@
};
};
-/* Exported on the micro USB connector CON32 through an FTDI */
+/*
+ * Exported on the micro USB connector CON30(V2.0)/CON32(V1.4) through
+ * an FTDI
+ */
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "okay";
};
-&sdhci0 {
- non-removable;
- bus-width = <8>;
- mmc-ddr-1_8v;
- mmc-hs400-1_8v;
- marvell,pad-type = "fixed-1-8v";
- status = "okay";
-};
-
-/* CON31 */
-&usb3 {
- status = "okay";
- usb-phy = <&usb3_phy>;
-};
-
-/* CON17 (PCIe) / CON12 (mini-PCIe) */
-&pcie0 {
- status = "okay";
-};
-
-/* CON27 */
+/* CON27(V2.0)/CON29(V1.4) */
&usb2 {
status = "okay";
};
-
-&mdio {
+/* CON29(V2.0)/CON31(V1.4) */
+&usb3 {
status = "okay";
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-ð0 {
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii-id";
- phy = <&phy0>;
- status = "okay";
-};
-
-ð1 {
- phy-mode = "sgmii";
- phy = <&phy1>;
- status = "okay";
+ usb-phy = <&usb3_phy>;
};
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 4d495ec..dbcc3d4 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -75,14 +75,10 @@
timer {
compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
};
soc {
@@ -163,7 +159,7 @@
pinctrl_nb: pinctrl@13800 {
compatible = "marvell,armada3710-nb-pinctrl",
- "syscon", "simple-mfd";
+ "syscon", "simple-mfd";
reg = <0x13800 0x100>, <0x13C00 0x20>;
gpionb: gpio {
#gpio-cells = <2>;
@@ -219,7 +215,7 @@
pinctrl_sb: pinctrl@18800 {
compatible = "marvell,armada3710-sb-pinctrl",
- "syscon", "simple-mfd";
+ "syscon", "simple-mfd";
reg = <0x18800 0x100>, <0x18C00 0x20>;
gpiosb: gpio {
#gpio-cells = <2>;
@@ -281,8 +277,8 @@
xor@60900 {
compatible = "marvell,armada-3700-xor";
- reg = <0x60900 0x100
- 0x60b00 0x100>;
+ reg = <0x60900 0x100>,
+ <0x60b00 0x100>;
xor10 {
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
@@ -292,11 +288,22 @@
};
};
+ sdhci1: sdhci@d0000 {
+ compatible = "marvell,armada-3700-sdhci",
+ "marvell,sdhci-xenon";
+ reg = <0xd0000 0x300>,
+ <0x1e808 0x4>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&nb_periph_clk 0>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
sdhci0: sdhci@d8000 {
compatible = "marvell,armada-3700-sdhci",
- "marvell,sdhci-xenon";
- reg = <0xd8000 0x300
- 0x17808 0x4>;
+ "marvell,sdhci-xenon";
+ reg = <0xd8000 0x300>,
+ <0x17808 0x4>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&nb_periph_clk 0>;
clock-names = "core";
diff --git a/arch/arm64/boot/dts/marvell/armada-7020.dtsi b/arch/arm64/boot/dts/marvell/armada-7020.dtsi
index 975e733..4ab0129 100644
--- a/arch/arm64/boot/dts/marvell/armada-7020.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-7020.dtsi
@@ -46,7 +46,7 @@
*/
#include "armada-ap806-dual.dtsi"
-#include "armada-cp110-master.dtsi"
+#include "armada-70x0.dtsi"
/ {
model = "Marvell Armada 7020";
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 1244232..92c761c 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -162,6 +162,8 @@
};
&cpm_mdio {
+ status = "okay";
+
phy0: ethernet-phy@0 {
reg = <0>;
};
@@ -185,7 +187,3 @@
phy = <&phy1>;
phy-mode = "rgmii-id";
};
-
-&cpm_crypto {
- status = "okay";
-};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
index 78d995d..cbe460b 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
@@ -46,7 +46,7 @@
*/
#include "armada-ap806-quad.dtsi"
-#include "armada-cp110-master.dtsi"
+#include "armada-70x0.dtsi"
/ {
model = "Marvell Armada 7040";
diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
new file mode 100644
index 0000000..860b6ae
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for the Armada 70x0 SoC
+ */
+
+#include "armada-cp110-master.dtsi"
+
+/ {
+ aliases {
+ gpio1 = &cpm_gpio1;
+ gpio2 = &cpm_gpio2;
+ };
+};
+
+&cpm_gpio1 {
+ status = "okay";
+};
+
+&cpm_gpio2 {
+ status = "okay";
+};
+
+&cpm_syscon0 {
+ cpm_pinctrl: pinctrl {
+ compatible = "marvell,armada-7k-pinctrl";
+ };
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
index 7c08f1f..0ba0bc9 100644
--- a/arch/arm64/boot/dts/marvell/armada-8020.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
@@ -46,8 +46,7 @@
*/
#include "armada-ap806-dual.dtsi"
-#include "armada-cp110-master.dtsi"
-#include "armada-cp110-slave.dtsi"
+#include "armada-80x0.dtsi"
/ {
model = "Marvell Armada 8020";
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index dc0d084..1e8f724 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -125,6 +125,8 @@
};
&cpm_mdio {
+ status = "okay";
+
phy1: ethernet-phy@1 {
reg = <1>;
};
@@ -140,10 +142,6 @@
phy-mode = "rgmii-id";
};
-&cpm_crypto {
- status = "okay";
-};
-
/* CON5 on CP1 expansion */
&cps_pcie2 {
status = "okay";
@@ -169,6 +167,24 @@
status = "okay";
};
+&cps_mdio {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&cps_ethernet {
+ status = "okay";
+};
+
+&cps_eth1 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+};
+
&ap_sdhci0 {
status = "okay";
bus-width = <4>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index f7bb0cc..4968e73 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -95,16 +95,47 @@
status = "okay";
};
+&ap_sdhci0 {
+ bus-width = <8>;
+ /*
+ * Not stable in HS modes - phy needs "more calibration", so add
+ * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
+ */
+ marvell,xenon-phy-slow-mode;
+ no-1-8-v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+ vqmmc-supply = <&v_vddo_h>;
+};
+
&cpm_i2c0 {
clock-frequency = <100000>;
status = "okay";
};
+&cpm_mdio {
+ status = "okay";
+
+ ge_phy: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
&cpm_sata0 {
/* CPM Lane 0 - U29 */
status = "okay";
};
+&cpm_sdhci0 {
+ /* U6 */
+ broken-cd;
+ bus-width = <4>;
+ status = "okay";
+ vqmmc-supply = <&v_3_3>;
+};
+
&cpm_usb3_0 {
/* J38? - USB2.0 only */
status = "okay";
@@ -115,6 +146,17 @@
status = "okay";
};
+&cps_ethernet {
+ status = "okay";
+};
+
+&cps_eth1 {
+ /* CPS Lane 0 - J5 (Gigabit RJ45) */
+ status = "okay";
+ phy = <&ge_phy>;
+ phy-mode = "sgmii";
+};
+
&cps_sata0 {
/* CPS Lane 1 - U32 */
/* CPS Lane 3 - U31 */
diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
index 33813a7..60fe84f 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
@@ -46,8 +46,7 @@
*/
#include "armada-ap806-quad.dtsi"
-#include "armada-cp110-master.dtsi"
-#include "armada-cp110-slave.dtsi"
+#include "armada-80x0.dtsi"
/ {
model = "Marvell Armada 8040";
diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
new file mode 100644
index 0000000..666ebe9
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for the Armada 80x0 SoC family
+ */
+
+#include "armada-cp110-master.dtsi"
+#include "armada-cp110-slave.dtsi"
+
+/ {
+ aliases {
+ gpio1 = &cps_gpio1;
+ gpio2 = &cpm_gpio2;
+ };
+};
+
+/* The 80x0 has two CP blocks, but uses only one block from each. */
+&cps_gpio1 {
+ status = "okay";
+};
+
+&cpm_gpio2 {
+ status = "okay";
+};
+
+&cpm_syscon0 {
+ cpm_pinctrl: pinctrl {
+ compatible = "marvell,armada-8k-cpm-pinctrl";
+ };
+};
+
+&cps_syscon0 {
+ cps_pinctrl: pinctrl {
+ compatible = "marvell,armada-8k-cps-pinctrl";
+ };
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index fe41bf9..1eb1f1e 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -57,6 +57,7 @@
aliases {
serial0 = &uart0;
serial1 = &uart1;
+ gpio0 = &ap_gpio;
};
psci {
@@ -146,6 +147,13 @@
marvell,spi-base = <128>, <136>, <144>, <152>;
};
+ gicp: gicp@3f0040 {
+ compatible = "marvell,ap806-gicp";
+ reg = <0x3f0040 0x10>;
+ marvell,spi-ranges = <64 64>, <288 64>;
+ msi-controller;
+ };
+
pic: interrupt-controller@3f0100 {
compatible = "marvell,armada-8k-pic";
reg = <0x3f0100 0x10>;
@@ -159,6 +167,7 @@
reg = <0x400000 0x1000>,
<0x410000 0x1000>;
msi-parent = <&gic_v2m0>;
+ clocks = <&ap_clk 3>;
dma-coherent;
};
@@ -167,6 +176,7 @@
reg = <0x420000 0x1000>,
<0x430000 0x1000>;
msi-parent = <&gic_v2m0>;
+ clocks = <&ap_clk 3>;
dma-coherent;
};
@@ -175,6 +185,7 @@
reg = <0x440000 0x1000>,
<0x450000 0x1000>;
msi-parent = <&gic_v2m0>;
+ clocks = <&ap_clk 3>;
dma-coherent;
};
@@ -183,6 +194,7 @@
reg = <0x460000 0x1000>,
<0x470000 0x1000>;
msi-parent = <&gic_v2m0>;
+ clocks = <&ap_clk 3>;
dma-coherent;
};
@@ -193,7 +205,7 @@
#size-cells = <0>;
cell-index = <0>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ap_syscon 3>;
+ clocks = <&ap_clk 3>;
status = "disabled";
};
@@ -204,7 +216,7 @@
#size-cells = <0>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
timeout-ms = <1000>;
- clocks = <&ap_syscon 3>;
+ clocks = <&ap_clk 3>;
status = "disabled";
};
@@ -214,7 +226,7 @@
reg-shift = <2>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
- clocks = <&ap_syscon 3>;
+ clocks = <&ap_clk 3>;
status = "disabled";
};
@@ -224,7 +236,7 @@
reg-shift = <2>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
- clocks = <&ap_syscon 3>;
+ clocks = <&ap_clk 3>;
status = "disabled";
};
@@ -234,21 +246,33 @@
reg = <0x6e0000 0x300>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core";
- clocks = <&ap_syscon 4>;
+ clocks = <&ap_clk 4>;
dma-coherent;
marvell,xenon-phy-slow-mode;
status = "disabled";
};
ap_syscon: system-controller@6f4000 {
- compatible = "marvell,ap806-system-controller",
- "syscon";
- #clock-cells = <1>;
- clock-output-names = "ap-cpu-cluster-0",
- "ap-cpu-cluster-1",
- "ap-fixed", "ap-mss",
- "ap-emmc";
+ compatible = "syscon", "simple-mfd";
reg = <0x6f4000 0x1000>;
+
+ ap_clk: clock {
+ compatible = "marvell,ap806-clock";
+ #clock-cells = <1>;
+ };
+
+ ap_pinctrl: pinctrl {
+ compatible = "marvell,ap806-pinctrl";
+ };
+
+ ap_gpio: gpio {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x1040>;
+ ngpios = <19>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&ap_pinctrl 0 0 19>;
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index b4bc42e..726528c 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -44,45 +44,46 @@
* Device Tree file for Marvell Armada CP110 Master.
*/
+#define ICU_GRP_NSR 0x0
+
/ {
cp110-master {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&cpm_icu>;
ranges;
config-space@f2000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
- interrupt-parent = <&gic>;
ranges = <0x0 0x0 0xf2000000 0x2000000>;
cpm_ethernet: ethernet@0 {
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>;
- clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>;
+ clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>, <&cpm_clk 1 5>;
clock-names = "pp_clk", "gop_clk", "mg_clk";
status = "disabled";
dma-coherent;
cpm_eth0: eth0 {
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>;
port-id = <0>;
gop-port-id = <0>;
status = "disabled";
};
cpm_eth1: eth1 {
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>;
port-id = <1>;
gop-port-id = <2>;
status = "disabled";
};
cpm_eth2: eth2 {
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>;
port-id = <2>;
gop-port-id = <3>;
status = "disabled";
@@ -94,41 +95,70 @@
#size-cells = <0>;
compatible = "marvell,orion-mdio";
reg = <0x12a200 0x10>;
+ clocks = <&cpm_clk 1 9>, <&cpm_clk 1 5>;
+ status = "disabled";
+ };
+
+ cpm_xmdio: mdio@12a600 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,xmdio";
+ reg = <0x12a600 0x10>;
+ status = "disabled";
+ };
+
+ cpm_icu: interrupt-controller@1e0000 {
+ compatible = "marvell,cp110-icu";
+ reg = <0x1e0000 0x10>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ msi-parent = <&gicp>;
};
cpm_syscon0: system-controller@440000 {
- compatible = "marvell,cp110-system-controller0",
- "syscon";
+ compatible = "syscon", "simple-mfd";
reg = <0x440000 0x1000>;
- #clock-cells = <2>;
- core-clock-output-names =
- "cpm-apll", "cpm-ppv2-core", "cpm-eip",
- "cpm-core", "cpm-nand-core";
- gate-clock-output-names =
- "cpm-audio", "cpm-communit", "cpm-nand",
- "cpm-ppv2", "cpm-sdio", "cpm-mg-domain",
- "cpm-mg-core", "cpm-xor1", "cpm-xor0",
- "cpm-gop-dp", "none", "cpm-pcie_x10",
- "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor",
- "cpm-sata", "cpm-sata-usb", "cpm-main",
- "cpm-sd-mmc-gop", "none", "none",
- "cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1",
- "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
+
+ cpm_clk: clock {
+ compatible = "marvell,cp110-clock";
+ #clock-cells = <2>;
+ };
+
+ cpm_gpio1: gpio@100 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x100>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&cpm_pinctrl 0 0 32>;
+ status = "disabled";
+
+ };
+
+ cpm_gpio2: gpio@140 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x140>;
+ ngpios = <31>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&cpm_pinctrl 0 32 31>;
+ status = "disabled";
+ };
};
cpm_rtc: rtc@284000 {
compatible = "marvell,armada-8k-rtc";
reg = <0x284000 0x20>, <0x284080 0x24>;
reg-names = "rtc", "rtc-soc";
- interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
};
cpm_sata0: sata@540000 {
compatible = "marvell,armada-8k-ahci",
"generic-ahci";
reg = <0x540000 0x30000>;
- interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 15>;
+ interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpm_clk 1 15>;
status = "disabled";
};
@@ -137,8 +167,8 @@
"generic-xhci";
reg = <0x500000 0x4000>;
dma-coherent;
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 22>;
+ interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpm_clk 1 22>;
status = "disabled";
};
@@ -147,8 +177,8 @@
"generic-xhci";
reg = <0x510000 0x4000>;
dma-coherent;
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 23>;
+ interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpm_clk 1 23>;
status = "disabled";
};
@@ -158,7 +188,7 @@
<0x6b0000 0x1000>;
dma-coherent;
msi-parent = <&gic_v2m0>;
- clocks = <&cpm_syscon0 1 8>;
+ clocks = <&cpm_clk 1 8>;
};
cpm_xor1: xor@6c0000 {
@@ -167,7 +197,7 @@
<0x6d0000 0x1000>;
dma-coherent;
msi-parent = <&gic_v2m0>;
- clocks = <&cpm_syscon0 1 7>;
+ clocks = <&cpm_clk 1 7>;
};
cpm_spi0: spi@700600 {
@@ -176,7 +206,7 @@
#address-cells = <0x1>;
#size-cells = <0x0>;
cell-index = <1>;
- clocks = <&cpm_syscon0 1 21>;
+ clocks = <&cpm_clk 1 21>;
status = "disabled";
};
@@ -186,7 +216,7 @@
#address-cells = <1>;
#size-cells = <0>;
cell-index = <2>;
- clocks = <&cpm_syscon0 1 21>;
+ clocks = <&cpm_clk 1 21>;
status = "disabled";
};
@@ -195,8 +225,8 @@
reg = <0x701000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 21>;
+ interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpm_clk 1 21>;
status = "disabled";
};
@@ -205,25 +235,25 @@
reg = <0x701100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 21>;
+ interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpm_clk 1 21>;
status = "disabled";
};
cpm_trng: trng@760000 {
compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76";
reg = <0x760000 0x7d>;
- interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 25>;
+ interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpm_clk 1 25>;
status = "okay";
};
cpm_sdhci0: sdhci@780000 {
compatible = "marvell,armada-cp110-sdhci";
reg = <0x780000 0x300>;
- interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core";
- clocks = <&cpm_syscon0 1 4>;
+ clocks = <&cpm_clk 1 4>;
dma-coherent;
status = "disabled";
};
@@ -231,16 +261,15 @@
cpm_crypto: crypto@800000 {
compatible = "inside-secure,safexcel-eip197";
reg = <0x800000 0x200000>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mem", "ring0", "ring1",
"ring2", "ring3", "eip";
- clocks = <&cpm_syscon0 1 26>;
- status = "disabled";
+ clocks = <&cpm_clk 1 26>;
};
};
@@ -263,10 +292,10 @@
/* non-prefetchable memory */
0x82000000 0 0xf6000000 0 0xf6000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
- clocks = <&cpm_syscon0 1 13>;
+ clocks = <&cpm_clk 1 13>;
status = "disabled";
};
@@ -289,11 +318,11 @@
/* non-prefetchable memory */
0x82000000 0 0xf7000000 0 0xf7000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
- clocks = <&cpm_syscon0 1 11>;
+ clocks = <&cpm_clk 1 11>;
status = "disabled";
};
@@ -316,11 +345,11 @@
/* non-prefetchable memory */
0x82000000 0 0xf8000000 0 0xf8000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
- clocks = <&cpm_syscon0 1 12>;
+ clocks = <&cpm_clk 1 12>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 6e20588..95f8e5f 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -44,19 +44,20 @@
* Device Tree file for Marvell Armada CP110 Slave.
*/
+#define ICU_GRP_NSR 0x0
+
/ {
cp110-slave {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&cps_icu>;
ranges;
config-space@f4000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
- interrupt-parent = <&gic>;
ranges = <0x0 0x0 0xf4000000 0x2000000>;
cps_rtc: rtc@284000 {
@@ -69,27 +70,27 @@
cps_ethernet: ethernet@0 {
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>;
- clocks = <&cps_syscon0 1 3>, <&cps_syscon0 1 9>, <&cps_syscon0 1 5>;
+ clocks = <&cps_clk 1 3>, <&cps_clk 1 9>, <&cps_clk 1 5>;
clock-names = "pp_clk", "gop_clk", "mg_clk";
status = "disabled";
dma-coherent;
cps_eth0: eth0 {
- interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>;
port-id = <0>;
gop-port-id = <0>;
status = "disabled";
};
cps_eth1: eth1 {
- interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>;
port-id = <1>;
gop-port-id = <2>;
status = "disabled";
};
cps_eth2: eth2 {
- interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>;
port-id = <2>;
gop-port-id = <3>;
status = "disabled";
@@ -101,34 +102,64 @@
#size-cells = <0>;
compatible = "marvell,orion-mdio";
reg = <0x12a200 0x10>;
+ clocks = <&cps_clk 1 9>, <&cps_clk 1 5>;
+ status = "disabled";
+ };
+
+ cps_xmdio: mdio@12a600 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,xmdio";
+ reg = <0x12a600 0x10>;
+ status = "disabled";
+ };
+
+ cps_icu: interrupt-controller@1e0000 {
+ compatible = "marvell,cp110-icu";
+ reg = <0x1e0000 0x10>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ msi-parent = <&gicp>;
};
cps_syscon0: system-controller@440000 {
- compatible = "marvell,cp110-system-controller0",
- "syscon";
+ compatible = "syscon", "simple-mfd";
reg = <0x440000 0x1000>;
- #clock-cells = <2>;
- core-clock-output-names =
- "cps-apll", "cps-ppv2-core", "cps-eip",
- "cps-core", "cps-nand-core";
- gate-clock-output-names =
- "cps-audio", "cps-communit", "cps-nand",
- "cps-ppv2", "cps-sdio", "cps-mg-domain",
- "cps-mg-core", "cps-xor1", "cps-xor0",
- "cps-gop-dp", "none", "cps-pcie_x10",
- "cps-pcie_x11", "cps-pcie_x4", "cps-pcie-xor",
- "cps-sata", "cps-sata-usb", "cps-main",
- "cps-sd-mmc-gop", "none", "none",
- "cps-slow-io", "cps-usb3h0", "cps-usb3h1",
- "cps-usb3dev", "cps-eip150", "cps-eip197";
+
+ cps_clk: clock {
+ compatible = "marvell,cp110-clock";
+ #clock-cells = <2>;
+ };
+
+ cps_gpio1: gpio@100 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x100>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&cps_pinctrl 0 0 32>;
+ status = "disabled";
+
+ };
+
+ cps_gpio2: gpio@140 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x140>;
+ ngpios = <31>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&cps_pinctrl 0 32 31>;
+ status = "disabled";
+ };
+
};
cps_sata0: sata@540000 {
compatible = "marvell,armada-8k-ahci",
"generic-ahci";
reg = <0x540000 0x30000>;
- interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 15>;
+ interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cps_clk 1 15>;
status = "disabled";
};
@@ -137,8 +168,8 @@
"generic-xhci";
reg = <0x500000 0x4000>;
dma-coherent;
- interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 22>;
+ interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cps_clk 1 22>;
status = "disabled";
};
@@ -147,8 +178,8 @@
"generic-xhci";
reg = <0x510000 0x4000>;
dma-coherent;
- interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 23>;
+ interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cps_clk 1 23>;
status = "disabled";
};
@@ -158,7 +189,7 @@
<0x6b0000 0x1000>;
dma-coherent;
msi-parent = <&gic_v2m0>;
- clocks = <&cps_syscon0 1 8>;
+ clocks = <&cps_clk 1 8>;
};
cps_xor1: xor@6c0000 {
@@ -167,7 +198,7 @@
<0x6d0000 0x1000>;
dma-coherent;
msi-parent = <&gic_v2m0>;
- clocks = <&cps_syscon0 1 7>;
+ clocks = <&cps_clk 1 7>;
};
cps_spi0: spi@700600 {
@@ -176,7 +207,7 @@
#address-cells = <0x1>;
#size-cells = <0x0>;
cell-index = <3>;
- clocks = <&cps_syscon0 1 21>;
+ clocks = <&cps_clk 1 21>;
status = "disabled";
};
@@ -186,7 +217,7 @@
#address-cells = <1>;
#size-cells = <0>;
cell-index = <4>;
- clocks = <&cps_syscon0 1 21>;
+ clocks = <&cps_clk 1 21>;
status = "disabled";
};
@@ -195,8 +226,8 @@
reg = <0x701000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 21>;
+ interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cps_clk 1 21>;
status = "disabled";
};
@@ -205,31 +236,38 @@
reg = <0x701100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 21>;
+ interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cps_clk 1 21>;
status = "disabled";
};
cps_trng: trng@760000 {
compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76";
reg = <0x760000 0x7d>;
- interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 25>;
+ interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cps_clk 1 25>;
status = "okay";
};
cps_crypto: crypto@800000 {
compatible = "inside-secure,safexcel-eip197";
reg = <0x800000 0x200000>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mem", "ring0", "ring1",
"ring2", "ring3", "eip";
- clocks = <&cps_syscon0 1 26>;
+ clocks = <&cps_clk 1 26>;
+ /*
+ * The cryptographic engine found on the cp110
+ * master is enabled by default at the SoC
+ * level. Because it is not possible as of now
+ * to enable two cryptographic engines in
+ * parallel, disable this one by default.
+ */
status = "disabled";
};
};
@@ -253,10 +291,10 @@
/* non-prefetchable memory */
0x82000000 0 0xfa000000 0 0xfa000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
- clocks = <&cps_syscon0 1 13>;
+ clocks = <&cps_clk 1 13>;
status = "disabled";
};
@@ -279,11 +317,11 @@
/* non-prefetchable memory */
0x82000000 0 0xfb000000 0 0xfb000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
- clocks = <&cps_syscon0 1 11>;
+ clocks = <&cps_clk 1 11>;
status = "disabled";
};
@@ -306,11 +344,11 @@
/* non-prefetchable memory */
0x82000000 0 0xfc000000 0 0xfc000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
- clocks = <&cps_syscon0 1 12>;
+ clocks = <&cps_clk 1 12>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 9fbfd32..015eb07 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -1,5 +1,6 @@
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
always := $(dtb-y)
diff --git a/arch/arm64/boot/dts/mediatek/mt6797-evb.dts b/arch/arm64/boot/dts/mediatek/mt6797-evb.dts
new file mode 100644
index 0000000..c79109c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6797-evb.dts
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt6797.dtsi"
+
+/ {
+ model = "MediaTek MT6797 Evaluation Board";
+ compatible = "mediatek,mt6797-evb", "mediatek,mt6797";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x1e800000>;
+ };
+
+ chosen {};
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
new file mode 100644
index 0000000..31088a9f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -0,0 +1,244 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/clock/mt6797-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "mediatek,mt6797";
+ interrupt-parent = <&sysirq>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x000>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x001>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x002>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x003>;
+ };
+
+ cpu4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x100>;
+ };
+
+ cpu5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x101>;
+ };
+
+ cpu6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x102>;
+ };
+
+ cpu7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x103>;
+ };
+
+ cpu8: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ enable-method = "psci";
+ reg = <0x200>;
+ };
+
+ cpu9: cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ enable-method = "psci";
+ reg = <0x201>;
+ };
+ };
+
+ clk26m: oscillator@0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "clk26m";
+ };
+
+ clk32k: oscillator@1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32000>;
+ clock-output-names = "clk32k";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ topckgen: topckgen@10000000 {
+ compatible = "mediatek,mt6797-topckgen";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ infrasys: infracfg_ao@10001000 {
+ compatible = "mediatek,mt6797-infracfg", "syscon";
+ reg = <0 0x10001000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ scpsys: scpsys@10006000 {
+ compatible = "mediatek,mt6797-scpsys";
+ #power-domain-cells = <1>;
+ reg = <0 0x10006000 0 0x1000>;
+ clocks = <&topckgen CLK_TOP_MUX_MFG>,
+ <&topckgen CLK_TOP_MUX_MM>,
+ <&topckgen CLK_TOP_MUX_VDEC>;
+ clock-names = "mfg", "mm", "vdec";
+ infracfg = <&infrasys>;
+ };
+
+ apmixedsys: apmixed@1000c000 {
+ compatible = "mediatek,mt6797-apmixedsys";
+ reg = <0 0x1000c000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ sysirq: intpol-controller@10200620 {
+ compatible = "mediatek,mt6797-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10220620 0 0x20>,
+ <0 0x10220690 0 0x10>;
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt6797-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x400>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infrasys CLK_INFRA_UART0>,
+ <&infrasys CLK_INFRA_AP_DMA>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt6797-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x400>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infrasys CLK_INFRA_UART1>,
+ <&infrasys CLK_INFRA_AP_DMA>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt6797-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x400>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infrasys CLK_INFRA_UART2>,
+ <&infrasys CLK_INFRA_AP_DMA>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart3: serial@11005000 {
+ compatible = "mediatek,mt6797-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11005000 0 0x400>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infrasys CLK_INFRA_UART3>,
+ <&infrasys CLK_INFRA_AP_DMA>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ mmsys: mmsys_config@14000000 {
+ compatible = "mediatek,mt6797-mmsys", "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys: imgsys_config@15000000 {
+ compatible = "mediatek,mt6797-imgsys", "syscon";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vdecsys: vdec_gcon@16000000 {
+ compatible = "mediatek,mt6797-vdecsys", "syscon";
+ reg = <0 0x16000000 0 0x10000>;
+ #clock-cells = <1>;
+ };
+
+ vencsys: venc_gcon@17000000 {
+ compatible = "mediatek,mt6797-vencsys", "syscon";
+ reg = <0 0x17000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ gic: interrupt-controller@19000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ reg = <0 0x19000000 0 0x10000>, /* GICD */
+ <0 0x19200000 0 0x200000>, /* GICR */
+ <0 0x10240000 0 0x2000>; /* GICC */
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 6922252..b99a273 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -731,8 +731,9 @@
<0 0x11280700 0 0x0100>;
reg-names = "mac", "ippc";
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>;
- phys = <&phy_port0 PHY_TYPE_USB3>,
- <&phy_port1 PHY_TYPE_USB2>;
+ phys = <&u2port0 PHY_TYPE_USB2>,
+ <&u3port0 PHY_TYPE_USB3>,
+ <&u2port1 PHY_TYPE_USB2>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
clocks = <&topckgen CLK_TOP_USB30_SEL>,
<&clk26m>,
@@ -763,21 +764,31 @@
u3phy: usb-phy@11290000 {
compatible = "mediatek,mt8173-u3phy";
reg = <0 0x11290000 0 0x800>;
- clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
- clock-names = "u3phya_ref";
#address-cells = <2>;
#size-cells = <2>;
ranges;
status = "okay";
- phy_port0: port@11290800 {
- reg = <0 0x11290800 0 0x800>;
+ u2port0: usb-phy@11290800 {
+ reg = <0 0x11290800 0 0x100>;
+ clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
- phy_port1: port@11291000 {
- reg = <0 0x11291000 0 0x800>;
+ u3port0: usb-phy@11290900 {
+ reg = <0 0x11290900 0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+
+ u2port1: usb-phy@11291000 {
+ reg = <0 0x11291000 0 0x100>;
+ clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
@@ -792,80 +803,74 @@
#clock-cells = <1>;
};
- mdp {
- compatible = "mediatek,mt8173-mdp";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ mdp_rdma0: rdma@14001000 {
+ compatible = "mediatek,mt8173-mdp-rdma",
+ "mediatek,mt8173-mdp";
+ reg = <0 0x14001000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+ <&mmsys CLK_MM_MUTEX_32K>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ iommus = <&iommu M4U_PORT_MDP_RDMA0>;
+ mediatek,larb = <&larb0>;
mediatek,vpu = <&vpu>;
+ };
- mdp_rdma0: rdma@14001000 {
- compatible = "mediatek,mt8173-mdp-rdma";
- reg = <0 0x14001000 0 0x1000>;
- clocks = <&mmsys CLK_MM_MDP_RDMA0>,
- <&mmsys CLK_MM_MUTEX_32K>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
- iommus = <&iommu M4U_PORT_MDP_RDMA0>;
- mediatek,larb = <&larb0>;
- };
+ mdp_rdma1: rdma@14002000 {
+ compatible = "mediatek,mt8173-mdp-rdma";
+ reg = <0 0x14002000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_RDMA1>,
+ <&mmsys CLK_MM_MUTEX_32K>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ iommus = <&iommu M4U_PORT_MDP_RDMA1>;
+ mediatek,larb = <&larb4>;
+ };
- mdp_rdma1: rdma@14002000 {
- compatible = "mediatek,mt8173-mdp-rdma";
- reg = <0 0x14002000 0 0x1000>;
- clocks = <&mmsys CLK_MM_MDP_RDMA1>,
- <&mmsys CLK_MM_MUTEX_32K>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
- iommus = <&iommu M4U_PORT_MDP_RDMA1>;
- mediatek,larb = <&larb4>;
- };
+ mdp_rsz0: rsz@14003000 {
+ compatible = "mediatek,mt8173-mdp-rsz";
+ reg = <0 0x14003000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ };
- mdp_rsz0: rsz@14003000 {
- compatible = "mediatek,mt8173-mdp-rsz";
- reg = <0 0x14003000 0 0x1000>;
- clocks = <&mmsys CLK_MM_MDP_RSZ0>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
- };
+ mdp_rsz1: rsz@14004000 {
+ compatible = "mediatek,mt8173-mdp-rsz";
+ reg = <0 0x14004000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ };
- mdp_rsz1: rsz@14004000 {
- compatible = "mediatek,mt8173-mdp-rsz";
- reg = <0 0x14004000 0 0x1000>;
- clocks = <&mmsys CLK_MM_MDP_RSZ1>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
- };
+ mdp_rsz2: rsz@14005000 {
+ compatible = "mediatek,mt8173-mdp-rsz";
+ reg = <0 0x14005000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_RSZ2>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ };
- mdp_rsz2: rsz@14005000 {
- compatible = "mediatek,mt8173-mdp-rsz";
- reg = <0 0x14005000 0 0x1000>;
- clocks = <&mmsys CLK_MM_MDP_RSZ2>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
- };
+ mdp_wdma0: wdma@14006000 {
+ compatible = "mediatek,mt8173-mdp-wdma";
+ reg = <0 0x14006000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_WDMA>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ iommus = <&iommu M4U_PORT_MDP_WDMA>;
+ mediatek,larb = <&larb0>;
+ };
- mdp_wdma0: wdma@14006000 {
- compatible = "mediatek,mt8173-mdp-wdma";
- reg = <0 0x14006000 0 0x1000>;
- clocks = <&mmsys CLK_MM_MDP_WDMA>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
- iommus = <&iommu M4U_PORT_MDP_WDMA>;
- mediatek,larb = <&larb0>;
- };
+ mdp_wrot0: wrot@14007000 {
+ compatible = "mediatek,mt8173-mdp-wrot";
+ reg = <0 0x14007000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_WROT0>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ iommus = <&iommu M4U_PORT_MDP_WROT0>;
+ mediatek,larb = <&larb0>;
+ };
- mdp_wrot0: wrot@14007000 {
- compatible = "mediatek,mt8173-mdp-wrot";
- reg = <0 0x14007000 0 0x1000>;
- clocks = <&mmsys CLK_MM_MDP_WROT0>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
- iommus = <&iommu M4U_PORT_MDP_WROT0>;
- mediatek,larb = <&larb0>;
- };
-
- mdp_wrot1: wrot@14008000 {
- compatible = "mediatek,mt8173-mdp-wrot";
- reg = <0 0x14008000 0 0x1000>;
- clocks = <&mmsys CLK_MM_MDP_WROT1>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
- iommus = <&iommu M4U_PORT_MDP_WROT1>;
- mediatek,larb = <&larb4>;
- };
+ mdp_wrot1: wrot@14008000 {
+ compatible = "mediatek,mt8173-mdp-wrot";
+ reg = <0 0x14008000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_WROT1>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ iommus = <&iommu M4U_PORT_MDP_WROT1>;
+ mediatek,larb = <&larb4>;
};
ovl0: ovl@1400c000 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 2b17936..c2f0f27 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -12,7 +12,7 @@
#address-cells = <2>;
#size-cells = <2>;
- pcie-controller@01003000 {
+ pcie@1003000 {
compatible = "nvidia,tegra124-pcie";
device_type = "pci";
reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
@@ -55,6 +55,7 @@
device_type = "pci";
assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
reg = <0x000800 0 0 0 0>;
+ bus-range = <0x00 0xff>;
status = "disabled";
#address-cells = <3>;
@@ -68,6 +69,7 @@
device_type = "pci";
assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
reg = <0x001000 0 0 0 0>;
+ bus-range = <0x00 0xff>;
status = "disabled";
#address-cells = <3>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 5e62e68..0b0552c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -348,6 +348,13 @@
reg-names = "pmc", "wake", "aotag", "scratch";
};
+ ccplex@e000000 {
+ compatible = "nvidia,tegra186-ccplex-cluster";
+ reg = <0x0 0x0e000000 0x0 0x3fffff>;
+
+ nvidia,bpmp = <&bpmp>;
+ };
+
gpu@17000000 {
compatible = "nvidia,gp10b";
reg = <0x0 0x17000000 0x0 0x1000000>,
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
index 4c1ea7a..7cb95e0 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
@@ -7,7 +7,7 @@
model = "NVIDIA Jetson TX1 Developer Kit";
compatible = "nvidia,p2371-2180", "nvidia,tegra210";
- pcie-controller@01003000 {
+ pcie@1003000 {
status = "okay";
avdd-pll-uerefe-supply = <&avdd_1v05_pll>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 8f26c4d..29f471e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -11,7 +11,7 @@
#address-cells = <2>;
#size-cells = <2>;
- pcie-controller@01003000 {
+ pcie@1003000 {
compatible = "nvidia,tegra210-pcie";
device_type = "pci";
reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
@@ -51,6 +51,7 @@
device_type = "pci";
assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
reg = <0x000800 0 0 0 0>;
+ bus-range = <0x00 0xff>;
status = "disabled";
#address-cells = <3>;
@@ -64,6 +65,7 @@
device_type = "pci";
assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
reg = <0x001000 0 0 0 0>;
+ bus-range = <0x00 0xff>;
status = "disabled";
#address-cells = <3>;
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index a17f5b9..bd310ac1 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -178,7 +178,7 @@
led@5 {
label = "apq8016-sbc:yellow:wlan";
gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "wlan";
+ linux,default-trigger = "phy0tx";
default-state = "off";
};
@@ -215,22 +215,16 @@
usb@78d9000 {
extcon = <&usb_id>, <&usb_id>;
status = "okay";
- };
-
- ehci@78d9000 {
- status = "okay";
- };
-
- phy@78d9000 {
- v1p8-supply = <&pm8916_l7>;
- v3p3-supply = <&pm8916_l13>;
- vddcx-supply = <&pm8916_s1>;
- extcon = <&usb_id>, <&usb_id>;
- dr_mode = "otg";
- status = "okay";
- switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb_sw_sel_pm>;
+ adp-disable;
+ hnp-disable;
+ srp-disable;
+ ulpi {
+ phy {
+ v1p8-supply = <&pm8916_l7>;
+ v3p3-supply = <&pm8916_l13>;
+ extcon = <&usb_id>;
+ };
+ };
};
lpass@07708000 {
@@ -348,6 +342,14 @@
pinctrl-0 = <&usb_id_default>;
};
+ usb-switch {
+ compatible = "toshiba,tc7usb40mu";
+ switch-gpios = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
+ extcon = <&usb_id>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_sw_sel_pm>;
+ };
+
hdmi-out {
compatible = "hdmi-connector";
type = "a";
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 17691ab..039991f 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -546,44 +546,40 @@
status = "disabled";
};
- usb_dev: usb@78d9000 {
+ otg: usb@78d9000 {
compatible = "qcom,ci-hdrc";
- reg = <0x78d9000 0x400>;
- dr_mode = "peripheral";
- interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
- usb-phy = <&usb_otg>;
- status = "disabled";
- };
-
- usb_host: ehci@78d9000 {
- compatible = "qcom,ehci-host";
- reg = <0x78d9000 0x400>;
- interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
- usb-phy = <&usb_otg>;
- status = "disabled";
- };
-
- usb_otg: phy@78d9000 {
- compatible = "qcom,usb-otg-snps";
- reg = <0x78d9000 0x400>;
+ reg = <0x78d9000 0x200>,
+ <0x78d9200 0x200>;
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-
- qcom,vdd-levels = <500000 1000000 1320000>;
- qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;
- dr_mode = "peripheral";
- qcom,otg-control = <2>; // PMIC
- qcom,manual-pullup;
-
clocks = <&gcc GCC_USB_HS_AHB_CLK>,
- <&gcc GCC_USB_HS_SYSTEM_CLK>,
- <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
- clock-names = "iface", "core", "sleep";
-
- resets = <&gcc GCC_USB2A_PHY_BCR>,
- <&gcc GCC_USB_HS_BCR>;
- reset-names = "phy", "link";
+ <&gcc GCC_USB_HS_SYSTEM_CLK>;
+ clock-names = "iface", "core";
+ assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+ assigned-clock-rates = <80000000>;
+ resets = <&gcc GCC_USB_HS_BCR>;
+ reset-names = "core";
+ phy_type = "ulpi";
+ dr_mode = "otg";
+ ahb-burst-config = <0>;
+ phy-names = "usb-phy";
+ phys = <&usb_hs_phy>;
status = "disabled";
+ #reset-cells = <1>;
+
+ ulpi {
+ usb_hs_phy: phy {
+ compatible = "qcom,usb-hs-phy-msm8916",
+ "qcom,usb-hs-phy";
+ #phy-cells = <0>;
+ clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+ clock-names = "ref", "sleep";
+ resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
+ reset-names = "phy", "por";
+ qcom,init-seq = /bits/ 8 <0x0 0x44
+ 0x1 0x6b 0x2 0x24 0x3 0x13>;
+ };
+ };
};
intc: interrupt-controller@b000000 {
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 44b2d37..1715787 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -68,6 +68,30 @@
clock-frequency = <32768>;
};
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ status = "okay";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
+
+ sfpb_mutex: hwmutex {
+ compatible = "qcom,sfpb-mutex";
+ syscon = <&sfpb_mutex_regs 0x0 0x100>;
+ #hwlock-cells = <1>;
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_region>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ hwlocks = <&sfpb_mutex 3>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -82,6 +106,11 @@
<0xf9002000 0x1000>;
};
+ apcs: syscon@f900d000 {
+ compatible = "syscon";
+ reg = <0xf900d000 0x2000>;
+ };
+
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -172,12 +201,36 @@
#power-domain-cells = <1>;
reg = <0xfc400000 0x2000>;
};
+
+ rpm_msg_ram: memory@fc428000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0xfc428000 0x4000>;
+ };
+
+ sfpb_mutex_regs: syscon@fd484000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "syscon";
+ reg = <0xfd484000 0x400>;
+ };
};
memory {
device_type = "memory";
reg = <0 0 0 0>; // bootloader will update
};
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ smem_region: smem@6a00000 {
+ reg = <0x0 0x6a00000 0x0 0x200000>;
+ no-map;
+ };
+ };
+
};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 9bc9c85..8f08571 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -311,6 +311,12 @@
reg = <0x300000 0x90000>;
};
+ kryocc: clock-controller@6400000 {
+ compatible = "qcom,apcc-msm8996";
+ reg = <0x6400000 0x90000>;
+ #clock-cells = <1>;
+ };
+
blsp1_spi0: spi@07575000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x07575000 0x600>;
diff --git a/arch/arm64/boot/dts/realtek/Makefile b/arch/arm64/boot/dts/realtek/Makefile
new file mode 100644
index 0000000..8521e92
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts b/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts
new file mode 100644
index 0000000..6efa809
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts
@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2016-2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x0000000000000000 0x0000000000030000;
+/memreserve/ 0x000000000001f000 0x0000000000001000;
+/memreserve/ 0x0000000000030000 0x00000000000d0000;
+/memreserve/ 0x0000000001b00000 0x00000000004be000;
+/memreserve/ 0x0000000001ffe000 0x0000000000004000;
+
+#include "rtd1295.dtsi"
+
+/ {
+ compatible = "zidoo,x9s", "realtek,rtd1295";
+ model = "Zidoo X9S";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x80000000>;
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1295.dtsi b/arch/arm64/boot/dts/realtek/rtd1295.dtsi
new file mode 100644
index 0000000..d8f8466
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1295.dtsi
@@ -0,0 +1,131 @@
+/*
+ * Realtek RTD1295 SoC
+ *
+ * Copyright (c) 2016-2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "realtek,rtd1295";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x0>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x1>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x2>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x3>;
+ next-level-cache = <&l2>;
+ };
+
+ l2: l2-cache {
+ compatible = "cache";
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ tee@10100000 {
+ reg = <0x10100000 0xf00000>;
+ no-map;
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* Exclude up to 2 GiB of RAM */
+ ranges = <0x80000000 0x80000000 0x80000000>;
+
+ uart0: serial@98007800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x98007800 0x400>,
+ <0x98007000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <27000000>;
+ status = "disabled";
+ };
+
+ uart1: serial@9801b200 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x9801b200 0x100>,
+ <0x9801b00c 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <432000000>;
+ status = "disabled";
+ };
+
+ uart2: serial@9801b400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x9801b400 0x100>,
+ <0x9801b00c 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <432000000>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@ff011000 {
+ compatible = "arm,gic-400";
+ reg = <0xff011000 0x1000>,
+ <0xff012000 0x2000>,
+ <0xff014000 0x2000>,
+ <0xff016000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 1618e0a..acc4bb3 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -1,4 +1,6 @@
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
always := $(dtb-y)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
new file mode 100644
index 0000000..95fe207
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
@@ -0,0 +1,42 @@
+/*
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
+
+/dts-v1/;
+#include "r8a7795-es1.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+ model = "Renesas H3ULCB board based on r8a7795 ES1.x";
+ compatible = "renesas,h3ulcb", "renesas,r8a7795";
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x38000000>;
+ };
+
+ memory@500000000 {
+ device_type = "memory";
+ reg = <0x5 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@700000000 {
+ device_type = "memory";
+ reg = <0x7 0x00000000 0x0 0x40000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
new file mode 100644
index 0000000..b84c156
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
@@ -0,0 +1,115 @@
+/*
+ * Device Tree Source for the Salvator-X board
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
+
+/dts-v1/;
+#include "r8a7795-es1.dtsi"
+#include "salvator-x.dtsi"
+
+/ {
+ model = "Renesas Salvator-X board based on r8a7795 ES1.x";
+ compatible = "renesas,salvator-x", "renesas,r8a7795";
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x38000000>;
+ };
+
+ memory@500000000 {
+ device_type = "memory";
+ reg = <0x5 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@700000000 {
+ device_type = "memory";
+ reg = <0x7 0x00000000 0x0 0x40000000>;
+ };
+};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&cpg CPG_MOD 721>,
+ <&cpg CPG_MOD 727>,
+ <&versaclock5 1>,
+ <&x21_clk>,
+ <&x22_clk>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
+ "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&hdmi0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
+ };
+ };
+ };
+};
+
+&hdmi0_con {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
+};
+
+&hdmi1 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi1_out: endpoint {
+ remote-endpoint = <&hdmi1_con>;
+ };
+ };
+ };
+};
+
+&hdmi1_con {
+ remote-endpoint = <&rcar_dw_hdmi1_out>;
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&pfc {
+ usb2_pins: usb2 {
+ groups = "usb2";
+ function = "usb2";
+ };
+};
+
+&sata {
+ status = "okay";
+};
+
+&usb2_phy2 {
+ pinctrl-0 = <&usb2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
new file mode 100644
index 0000000..a0ba7bd
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
@@ -0,0 +1,84 @@
+/*
+ * Device Tree Source for the r8a7795 ES1.x SoC
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "r8a7795.dtsi"
+
+&soc {
+ xhci1: usb@ee0400000 {
+ compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
+ reg = <0 0xee040000 0 0xc00>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 327>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 327>;
+ status = "disabled";
+ };
+
+ fcpf2: fcp@fe952000 {
+ compatible = "renesas,fcpf";
+ reg = <0 0xfe952000 0 0x200>;
+ clocks = <&cpg CPG_MOD 613>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 613>;
+ };
+
+ vspi2: vsp@fe9c0000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe9c0000 0 0x8000>;
+ interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 629>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 629>;
+
+ renesas,fcp = <&fcpvi2>;
+ };
+
+ fcpvi2: fcp@fe9cf000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe9cf000 0 0x200>;
+ clocks = <&cpg CPG_MOD 609>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 609>;
+ };
+
+ vspd3: vsp@fea38000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea38000 0 0x4000>;
+ interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 620>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 620>;
+
+ renesas,fcp = <&fcpvd3>;
+ };
+
+ fcpvd3: fcp@fea3f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea3f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 600>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 600>;
+ };
+
+ fdp1@fe948000 {
+ compatible = "renesas,fdp1";
+ reg = <0 0xfe948000 0 0x2400>;
+ interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 117>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 117>;
+ renesas,fcp = <&fcpf2>;
+ };
+};
+
+&du {
+ compatible = "renesas,du-r8a7795";
+ vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index ab35215..0426f41 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -9,24 +9,16 @@
* kind, whether express or implied.
*/
+#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
+
/dts-v1/;
#include "r8a7795.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "ulcb.dtsi"
/ {
- model = "Renesas H3ULCB board based on r8a7795";
+ model = "Renesas H3ULCB board based on r8a7795 ES2.0+";
compatible = "renesas,h3ulcb", "renesas,r8a7795";
- aliases {
- serial0 = &scif2;
- ethernet0 = &avb;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
@@ -47,330 +39,4 @@
device_type = "memory";
reg = <0x7 0x00000000 0x0 0x40000000>;
};
-
- leds {
- compatible = "gpio-leds";
-
- led5 {
- gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
- };
- led6 {
- gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keyboard {
- compatible = "gpio-keys";
-
- key-1 {
- linux,code = <KEY_1>;
- label = "SW3";
- wakeup-source;
- debounce-interval = <20>;
- gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
- };
- };
-
- x12_clk: x12 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24576000>;
- };
-
- reg_1p8v: regulator0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_3p3v: regulator1 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vcc_sdhi0: regulator-vcc-sdhi0 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi0: regulator-vccq-sdhi0 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-
- audio_clkout: audio-clkout {
- /*
- * This is same as <&rcar_sound 0>
- * but needed to avoid cs2000/rcar_sound probe dead-lock
- */
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <11289600>;
- };
-
- rsnd_ak4613: sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,format = "left_j";
- simple-audio-card,bitclock-master = <&sndcpu>;
- simple-audio-card,frame-master = <&sndcpu>;
-
- sndcpu: simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
-
- sndcodec: simple-audio-card,codec {
- sound-dai = <&ak4613>;
- };
- };
-};
-
-&extal_clk {
- clock-frequency = <16666666>;
-};
-
-&extalr_clk {
- clock-frequency = <32768>;
-};
-
-&pfc {
- pinctrl-0 = <&scif_clk_pins>;
- pinctrl-names = "default";
-
- scif2_pins: scif2 {
- groups = "scif2_data_a";
- function = "scif2";
- };
-
- scif_clk_pins: scif_clk {
- groups = "scif_clk_a";
- function = "scif_clk";
- };
-
- i2c2_pins: i2c2 {
- groups = "i2c2_a";
- function = "i2c2";
- };
-
- avb_pins: avb {
- groups = "avb_mdc";
- function = "avb";
- };
-
- sdhi0_pins: sd0 {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <3300>;
- };
-
- sdhi0_pins_uhs: sd0_uhs {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <1800>;
- };
-
- sdhi2_pins: sd2 {
- groups = "sdhi2_data8", "sdhi2_ctrl";
- function = "sdhi2";
- power-source = <3300>;
- };
-
- sdhi2_pins_uhs: sd2_uhs {
- groups = "sdhi2_data8", "sdhi2_ctrl";
- function = "sdhi2";
- power-source = <1800>;
- };
-
- sound_pins: sound {
- groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
- function = "ssi";
- };
-
- sound_clk_pins: sound-clk {
- groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
- "audio_clkout_a", "audio_clkout3_a";
- function = "audio_clk";
- };
-
- usb1_pins: usb1 {
- groups = "usb1";
- function = "usb1";
- };
-};
-
-&scif2 {
- pinctrl-0 = <&scif2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&scif_clk {
- clock-frequency = <14745600>;
-};
-
-&i2c2 {
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- clock-frequency = <100000>;
-
- ak4613: codec@10 {
- compatible = "asahi-kasei,ak4613";
- #sound-dai-cells = <0>;
- reg = <0x10>;
- clocks = <&rcar_sound 3>;
-
- asahi-kasei,in1-single-end;
- asahi-kasei,in2-single-end;
- asahi-kasei,out1-single-end;
- asahi-kasei,out2-single-end;
- asahi-kasei,out3-single-end;
- asahi-kasei,out4-single-end;
- asahi-kasei,out5-single-end;
- asahi-kasei,out6-single-end;
- };
-
- cs2000: clk-multiplier@4f {
- #clock-cells = <0>;
- compatible = "cirrus,cs2000-cp";
- reg = <0x4f>;
- clocks = <&audio_clkout>, <&x12_clk>;
- clock-names = "clk_in", "ref_clk";
-
- assigned-clocks = <&cs2000>;
- assigned-clock-rates = <24576000>; /* 1/1 divide */
- };
-};
-
-&rcar_sound {
- pinctrl-0 = <&sound_pins &sound_clk_pins>;
- pinctrl-names = "default";
-
- /* Single DAI */
- #sound-dai-cells = <0>;
-
- /* audio_clkout0/1/2/3 */
- #clock-cells = <1>;
- clock-frequency = <11289600>;
-
- status = "okay";
-
- /* update <audio_clk_b> to <cs2000> */
- clocks = <&cpg CPG_MOD 1005>,
- <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
- <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
- <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
- <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
- <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
- <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
- <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
- <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
- <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
- <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
- <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
- <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
- <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
- <&audio_clk_a>, <&cs2000>,
- <&audio_clk_c>,
- <&cpg CPG_CORE R8A7795_CLK_S0D4>;
-
- rcar_sound,dai {
- dai0 {
- playback = <&ssi0 &src0 &dvc0>;
- capture = <&ssi1 &src1 &dvc1>;
- };
- };
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-1 = <&sdhi0_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi0>;
- vqmmc-supply = <&vccq_sdhi0>;
- cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
- bus-width = <4>;
- sd-uhs-sdr50;
- status = "okay";
-};
-
-&sdhi2 {
- /* used for on-board 8bit eMMC */
- pinctrl-0 = <&sdhi2_pins>;
- pinctrl-1 = <&sdhi2_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_1p8v>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&ssi1 {
- shared-pin;
-};
-
-&wdt0 {
- timeout-sec = <60>;
- status = "okay";
-};
-
-&audio_clk_a {
- clock-frequency = <22579200>;
-};
-
-&avb {
- pinctrl-0 = <&avb_pins>;
- pinctrl-names = "default";
- renesas,no-ether-link;
- phy-handle = <&phy0>;
- status = "okay";
-
- phy0: ethernet-phy@0 {
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupt-parent = <&gpio2>;
- interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&usb2_phy1 {
- pinctrl-0 = <&usb1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 639aa08..684fb3b 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -8,577 +8,108 @@
* kind, whether express or implied.
*/
-/*
- * SSI-AK4613
- *
- * This command is required when Playback/Capture
- *
- * amixer set "DVC Out" 100%
- * amixer set "DVC In" 100%
- *
- * You can use Mute
- *
- * amixer set "DVC Out Mute" on
- * amixer set "DVC In Mute" on
- *
- * You can use Volume Ramp
- *
- * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
- * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
- * amixer set "DVC Out Ramp" on
- * aplay xxx.wav &
- * amixer set "DVC Out" 80% // Volume Down
- * amixer set "DVC Out" 100% // Volume Up
- */
+#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
/dts-v1/;
#include "r8a7795.dtsi"
-#include <dt-bindings/gpio/gpio.h>
+#include "salvator-x.dtsi"
/ {
- model = "Renesas Salvator-X board based on r8a7795";
+ model = "Renesas Salvator-X board based on r8a7795 ES2.0+";
compatible = "renesas,salvator-x", "renesas,r8a7795";
- aliases {
- serial0 = &scif2;
- serial1 = &scif1;
- ethernet0 = &avb;
- };
-
- chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = "serial0:115200n8";
- };
-
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
- x12_clk: x12 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24576000>;
+ memory@500000000 {
+ device_type = "memory";
+ reg = <0x5 0x00000000 0x0 0x40000000>;
};
- reg_1p8v: regulator0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x40000000>;
};
- reg_3p3v: regulator1 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vcc_sdhi0: regulator-vcc-sdhi0 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi0: regulator-vccq-sdhi0 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-
- vcc_sdhi3: regulator-vcc-sdhi3 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI3 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi3: regulator-vccq-sdhi3 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI3 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-
- vbus0_usb2: regulator-vbus0-usb2 {
- compatible = "regulator-fixed";
-
- regulator-name = "USB20_VBUS0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- audio_clkout: audio_clkout {
- /*
- * This is same as <&rcar_sound 0>
- * but needed to avoid cs2000/rcar_sound probe dead-lock
- */
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <11289600>;
- };
-
- rsnd_ak4613: sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,format = "left_j";
- simple-audio-card,bitclock-master = <&sndcpu>;
- simple-audio-card,frame-master = <&sndcpu>;
-
- sndcpu: simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
-
- sndcodec: simple-audio-card,codec {
- sound-dai = <&ak4613>;
- };
- };
-
- vga-encoder {
- compatible = "adi,adv7123";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7123_in: endpoint {
- remote-endpoint = <&du_out_rgb>;
- };
- };
- port@1 {
- reg = <1>;
- adv7123_out: endpoint {
- remote-endpoint = <&vga_in>;
- };
- };
- };
- };
-
- vga {
- compatible = "vga-connector";
-
- port {
- vga_in: endpoint {
- remote-endpoint = <&adv7123_out>;
- };
- };
+ memory@700000000 {
+ device_type = "memory";
+ reg = <0x7 0x00000000 0x0 0x40000000>;
};
};
&du {
- pinctrl-0 = <&du_pins>;
- pinctrl-names = "default";
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&cpg CPG_MOD 721>,
+ <&cpg CPG_MOD 727>,
+ <&versaclock5 1>,
+ <&x21_clk>,
+ <&x22_clk>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
+ "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&hdmi0 {
status = "okay";
ports {
- port@0 {
- endpoint {
- remote-endpoint = <&adv7123_in>;
- };
- };
- port@3 {
- lvds_connector: endpoint {
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
};
};
};
};
-&extal_clk {
- clock-frequency = <16666666>;
+&hdmi0_con {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
};
-&extalr_clk {
- clock-frequency = <32768>;
+&hdmi1 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi1_out: endpoint {
+ remote-endpoint = <&hdmi1_con>;
+ };
+ };
+ };
+};
+
+&hdmi1_con {
+ remote-endpoint = <&rcar_dw_hdmi1_out>;
+};
+
+&ohci2 {
+ status = "okay";
};
&pfc {
- pinctrl-0 = <&scif_clk_pins>;
- pinctrl-names = "default";
-
- scif1_pins: scif1 {
- groups = "scif1_data_a", "scif1_ctrl";
- function = "scif1";
- };
- scif2_pins: scif2 {
- groups = "scif2_data_a";
- function = "scif2";
- };
- scif_clk_pins: scif_clk {
- groups = "scif_clk_a";
- function = "scif_clk";
- };
-
- i2c2_pins: i2c2 {
- groups = "i2c2_a";
- function = "i2c2";
- };
-
- avb_pins: avb {
- mux {
- groups = "avb_link", "avb_phy_int", "avb_mdc",
- "avb_mii";
- function = "avb";
- };
-
- pins_mdc {
- groups = "avb_mdc";
- drive-strength = <24>;
- };
-
- pins_mii_tx {
- pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
- "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
- drive-strength = <12>;
- };
- };
-
- du_pins: du {
- groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
- function = "du";
- };
-
- sdhi0_pins: sd0 {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <3300>;
- };
-
- sdhi0_pins_uhs: sd0_uhs {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <1800>;
- };
-
- sdhi2_pins: sd2 {
- groups = "sdhi2_data8", "sdhi2_ctrl";
- function = "sdhi2";
- power-source = <3300>;
- };
-
- sdhi2_pins_uhs: sd2_uhs {
- groups = "sdhi2_data8", "sdhi2_ctrl";
- function = "sdhi2";
- power-source = <1800>;
- };
-
- sdhi3_pins: sd3 {
- groups = "sdhi3_data4", "sdhi3_ctrl";
- function = "sdhi3";
- power-source = <3300>;
- };
-
- sdhi3_pins_uhs: sd3_uhs {
- groups = "sdhi3_data4", "sdhi3_ctrl";
- function = "sdhi3";
- power-source = <1800>;
- };
-
- sound_pins: sound {
- groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
- function = "ssi";
- };
-
- sound_clk_pins: sound_clk {
- groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
- "audio_clkout_a", "audio_clkout3_a";
- function = "audio_clk";
- };
-
- usb0_pins: usb0 {
- groups = "usb0";
- function = "usb0";
- };
-
- usb1_pins: usb1 {
- mux {
- groups = "usb1";
- function = "usb1";
- };
-
- ovc {
- pins = "GP_6_27";
- bias-pull-up;
- };
-
- pwen {
- pins = "GP_6_26";
- bias-pull-down;
- };
- };
-
usb2_pins: usb2 {
groups = "usb2";
function = "usb2";
};
};
-&scif1 {
- pinctrl-0 = <&scif1_pins>;
- pinctrl-names = "default";
-
- uart-has-rtscts;
- status = "okay";
-};
-
-&scif2 {
- pinctrl-0 = <&scif2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&scif_clk {
- clock-frequency = <14745600>;
-};
-
-&i2c2 {
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- clock-frequency = <100000>;
-
- ak4613: codec@10 {
- compatible = "asahi-kasei,ak4613";
- #sound-dai-cells = <0>;
- reg = <0x10>;
- clocks = <&rcar_sound 3>;
-
- asahi-kasei,in1-single-end;
- asahi-kasei,in2-single-end;
- asahi-kasei,out1-single-end;
- asahi-kasei,out2-single-end;
- asahi-kasei,out3-single-end;
- asahi-kasei,out4-single-end;
- asahi-kasei,out5-single-end;
- asahi-kasei,out6-single-end;
- };
-
- cs2000: clk_multiplier@4f {
- #clock-cells = <0>;
- compatible = "cirrus,cs2000-cp";
- reg = <0x4f>;
- clocks = <&audio_clkout>, <&x12_clk>;
- clock-names = "clk_in", "ref_clk";
-
- assigned-clocks = <&cs2000>;
- assigned-clock-rates = <24576000>; /* 1/1 divide */
- };
-};
-
-&rcar_sound {
- pinctrl-0 = <&sound_pins &sound_clk_pins>;
- pinctrl-names = "default";
-
- /* Single DAI */
- #sound-dai-cells = <0>;
-
- /* audio_clkout0/1/2/3 */
- #clock-cells = <1>;
- clock-frequency = <11289600>;
-
- status = "okay";
-
- /* update <audio_clk_b> to <cs2000> */
- clocks = <&cpg CPG_MOD 1005>,
- <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
- <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
- <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
- <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
- <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
- <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
- <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
- <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
- <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
- <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
- <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
- <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
- <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
- <&audio_clk_a>, <&cs2000>,
- <&audio_clk_c>,
- <&cpg CPG_CORE R8A7795_CLK_S0D4>;
-
- rcar_sound,dai {
- dai0 {
- playback = <&ssi0 &src0 &dvc0>;
- capture = <&ssi1 &src1 &dvc1>;
- };
- };
-};
-
&sata {
status = "okay";
};
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-1 = <&sdhi0_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi0>;
- vqmmc-supply = <&vccq_sdhi0>;
- cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
- bus-width = <4>;
- sd-uhs-sdr50;
- status = "okay";
-};
-
-&sdhi2 {
- /* used for on-board 8bit eMMC */
- pinctrl-0 = <&sdhi2_pins>;
- pinctrl-1 = <&sdhi2_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_1p8v>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&sdhi3 {
- pinctrl-0 = <&sdhi3_pins>;
- pinctrl-1 = <&sdhi3_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi3>;
- vqmmc-supply = <&vccq_sdhi3>;
- cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
- bus-width = <4>;
- sd-uhs-sdr50;
- status = "okay";
-};
-
-&ssi1 {
- shared-pin;
-};
-
-&wdt0 {
- timeout-sec = <60>;
- status = "okay";
-};
-
-&audio_clk_a {
- clock-frequency = <22579200>;
-};
-
-&i2c_dvfs {
- status = "okay";
-};
-
-&avb {
- pinctrl-0 = <&avb_pins>;
- pinctrl-names = "default";
- renesas,no-ether-link;
- phy-handle = <&phy0>;
- status = "okay";
-
- phy0: ethernet-phy@0 {
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupt-parent = <&gpio2>;
- interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&xhci0 {
- status = "okay";
-};
-
-&usb2_phy0 {
- pinctrl-0 = <&usb0_pins>;
- pinctrl-names = "default";
-
- vbus-supply = <&vbus0_usb2>;
- status = "okay";
-};
-
-&usb2_phy1 {
- pinctrl-0 = <&usb1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
&usb2_phy2 {
pinctrl-0 = <&usb2_pins>;
pinctrl-names = "default";
status = "okay";
};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&ehci2 {
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&ohci2 {
- status = "okay";
-};
-
-&hsusb {
- status = "okay";
-};
-
-&pcie_bus_clk {
- clock-frequency = <100000000>;
-};
-
-&pciec0 {
- status = "okay";
-};
-
-&pciec1 {
- status = "okay";
-};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
new file mode 100644
index 0000000..de35495
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
@@ -0,0 +1,109 @@
+/*
+ * Device Tree Source for the Salvator-X 2nd version board
+ *
+ * Copyright (C) 2015-2017 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
+
+/dts-v1/;
+#include "r8a7795.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+ model = "Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+";
+ compatible = "renesas,salvator-xs", "renesas,r8a7795";
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x38000000>;
+ };
+
+ memory@500000000 {
+ device_type = "memory";
+ reg = <0x5 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@700000000 {
+ device_type = "memory";
+ reg = <0x7 0x00000000 0x0 0x40000000>;
+ };
+};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&cpg CPG_MOD 721>,
+ <&cpg CPG_MOD 727>,
+ <&x21_clk>,
+ <&x22_clk>;
+ clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
+ "dclkin.1", "dclkin.2";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&hdmi0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
+ };
+ };
+ };
+};
+
+&hdmi0_con {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
+};
+
+&hdmi1 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi1_out: endpoint {
+ remote-endpoint = <&hdmi1_con>;
+ };
+ };
+ };
+};
+
+&hdmi1_con {
+ remote-endpoint = <&rcar_dw_hdmi1_out>;
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&pfc {
+ usb2_pins: usb2 {
+ groups = "usb2";
+ function = "usb2";
+ };
+};
+
+&usb2_phy2 {
+ pinctrl-0 = <&usb2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index e99d644..e31c1b6 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -182,7 +182,7 @@
clock-frequency = <0>;
};
- soc {
+ soc: soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
@@ -398,7 +398,7 @@
#power-domain-cells = <1>;
};
- pfc: pfc@e6060000 {
+ pfc: pin-controller@e6060000 {
compatible = "renesas,pfc-r8a7795";
reg = <0 0xe6060000 0 0x50c>;
};
@@ -883,6 +883,8 @@
clocks = <&cpg CPG_MOD 926>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 926>;
+ dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1118,6 +1120,16 @@
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>,
+ <&cpg 1008>, <&cpg 1009>,
+ <&cpg 1010>, <&cpg 1011>,
+ <&cpg 1012>, <&cpg 1013>,
+ <&cpg 1014>, <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0";
status = "disabled";
rcar_sound,dvc {
@@ -1274,16 +1286,6 @@
status = "disabled";
};
- xhci1: usb@ee0400000 {
- compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
- reg = <0 0xee040000 0 0xc00>;
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 327>;
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 327>;
- status = "disabled";
- };
-
usb_dmac0: dma-controller@e65a0000 {
compatible = "renesas,r8a7795-usb-dmac",
"renesas,usb-dmac";
@@ -1568,14 +1570,6 @@
resets = <&cpg 614>;
};
- fcpf2: fcp@fe952000 {
- compatible = "renesas,fcpf";
- reg = <0 0xfe952000 0 0x200>;
- clocks = <&cpg CPG_MOD 613>;
- power-domains = <&sysc R8A7795_PD_A3VP>;
- resets = <&cpg 613>;
- };
-
vspbd: vsp@fe960000 {
compatible = "renesas,vsp2";
reg = <0 0xfe960000 0 0x8000>;
@@ -1633,25 +1627,6 @@
resets = <&cpg 610>;
};
- vspi2: vsp@fe9c0000 {
- compatible = "renesas,vsp2";
- reg = <0 0xfe9c0000 0 0x8000>;
- interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 629>;
- power-domains = <&sysc R8A7795_PD_A3VP>;
- resets = <&cpg 629>;
-
- renesas,fcp = <&fcpvi2>;
- };
-
- fcpvi2: fcp@fe9cf000 {
- compatible = "renesas,fcpv";
- reg = <0 0xfe9cf000 0 0x200>;
- clocks = <&cpg CPG_MOD 609>;
- power-domains = <&sysc R8A7795_PD_A3VP>;
- resets = <&cpg 609>;
- };
-
vspd0: vsp@fea20000 {
compatible = "renesas,vsp2";
reg = <0 0xfea20000 0 0x4000>;
@@ -1709,25 +1684,6 @@
resets = <&cpg 601>;
};
- vspd3: vsp@fea38000 {
- compatible = "renesas,vsp2";
- reg = <0 0xfea38000 0 0x4000>;
- interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 620>;
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 620>;
-
- renesas,fcp = <&fcpvd3>;
- };
-
- fcpvd3: fcp@fea3f000 {
- compatible = "renesas,fcpv";
- reg = <0 0xfea3f000 0 0x200>;
- clocks = <&cpg CPG_MOD 600>;
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 600>;
- };
-
fdp1@fe940000 {
compatible = "renesas,fdp1";
reg = <0 0xfe940000 0 0x2400>;
@@ -1748,18 +1704,57 @@
renesas,fcp = <&fcpf1>;
};
- fdp1@fe948000 {
- compatible = "renesas,fdp1";
- reg = <0 0xfe948000 0 0x2400>;
- interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 117>;
- power-domains = <&sysc R8A7795_PD_A3VP>;
- resets = <&cpg 117>;
- renesas,fcp = <&fcpf2>;
+ hdmi0: hdmi0@fead0000 {
+ compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
+ reg = <0 0xfead0000 0 0x10000>;
+ interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE R8A7795_CLK_HDMI>;
+ clock-names = "iahb", "isfr";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 729>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dw_hdmi0_in: endpoint {
+ remote-endpoint = <&du_out_hdmi0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ hdmi1: hdmi1@feae0000 {
+ compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
+ reg = <0 0xfeae0000 0 0x10000>;
+ interrupts = <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 728>, <&cpg CPG_CORE R8A7795_CLK_HDMI>;
+ clock-names = "iahb", "isfr";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 728>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dw_hdmi1_in: endpoint {
+ remote-endpoint = <&du_out_hdmi1>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ };
+ };
};
du: display@feb00000 {
- compatible = "renesas,du-r8a7795";
reg = <0 0xfeb00000 0 0x80000>,
<0 0xfeb90000 0 0x14>;
reg-names = "du", "lvds.0";
@@ -1775,8 +1770,6 @@
clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
status = "disabled";
- vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
-
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1789,11 +1782,13 @@
port@1 {
reg = <1>;
du_out_hdmi0: endpoint {
+ remote-endpoint = <&dw_hdmi0_in>;
};
};
port@2 {
reg = <2>;
du_out_hdmi1: endpoint {
+ remote-endpoint = <&dw_hdmi1_in>;
};
};
port@3 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 372b2a9..38b58b7 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -9,180 +9,24 @@
* kind, whether express or implied.
*/
+#define CPG_AUDIO_CLK_I R8A7796_CLK_S0D4
+
/dts-v1/;
#include "r8a7796.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "ulcb.dtsi"
/ {
model = "Renesas M3ULCB board based on r8a7796";
compatible = "renesas,m3ulcb", "renesas,r8a7796";
- aliases {
- serial0 = &scif2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
- leds {
- compatible = "gpio-leds";
-
- led5 {
- gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
- };
- led6 {
- gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
- };
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x40000000>;
};
-
- keyboard {
- compatible = "gpio-keys";
-
- key-1 {
- linux,code = <KEY_1>;
- label = "SW3";
- wakeup-source;
- debounce-interval = <20>;
- gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
- };
- };
-
- reg_1p8v: regulator0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_3p3v: regulator1 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vcc_sdhi0: regulator-vcc-sdhi0 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi0: regulator-vccq-sdhi0 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-};
-
-&extal_clk {
- clock-frequency = <16666666>;
-};
-
-&extalr_clk {
- clock-frequency = <32768>;
-};
-
-&pfc {
- pinctrl-0 = <&scif_clk_pins>;
- pinctrl-names = "default";
-
- scif2_pins: scif2 {
- groups = "scif2_data_a";
- function = "scif2";
- };
-
- scif_clk_pins: scif_clk {
- groups = "scif_clk_a";
- function = "scif_clk";
- };
-
- sdhi0_pins: sd0 {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <3300>;
- };
-
- sdhi0_pins_uhs: sd0_uhs {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <1800>;
- };
-
- sdhi2_pins: sd2 {
- groups = "sdhi2_data8", "sdhi2_ctrl";
- function = "sdhi2";
- power-source = <3300>;
- };
-
- sdhi2_pins_uhs: sd2_uhs {
- groups = "sdhi2_data8", "sdhi2_ctrl";
- function = "sdhi2";
- power-source = <1800>;
- };
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-1 = <&sdhi0_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi0>;
- vqmmc-supply = <&vccq_sdhi0>;
- cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
- bus-width = <4>;
- sd-uhs-sdr50;
- status = "okay";
-};
-
-&sdhi2 {
- /* used for on-board 8bit eMMC */
- pinctrl-0 = <&sdhi2_pins>;
- pinctrl-1 = <&sdhi2_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_1p8v>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&scif2 {
- pinctrl-0 = <&scif2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&scif_clk {
- clock-frequency = <14745600>;
-};
-
-&wdt0 {
- timeout-sec = <60>;
- status = "okay";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
index c9f59b6..db4f162 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
@@ -8,25 +8,16 @@
* kind, whether express or implied.
*/
+#define CPG_AUDIO_CLK_I R8A7796_CLK_S0D4
+
/dts-v1/;
#include "r8a7796.dtsi"
-#include <dt-bindings/gpio/gpio.h>
+#include "salvator-x.dtsi"
/ {
model = "Renesas Salvator-X board based on r8a7796";
compatible = "renesas,salvator-x", "renesas,r8a7796";
- aliases {
- serial0 = &scif2;
- serial1 = &scif1;
- ethernet0 = &avb;
- };
-
- chosen {
- bootargs = "ignore_loglevel";
- stdout-path = "serial0:115200n8";
- };
-
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
@@ -37,233 +28,4 @@
device_type = "memory";
reg = <0x6 0x00000000 0x0 0x80000000>;
};
-
- reg_1p8v: regulator0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_3p3v: regulator1 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vcc_sdhi0: regulator-vcc-sdhi0 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi0: regulator-vccq-sdhi0 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-
- vcc_sdhi3: regulator-vcc-sdhi3 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI3 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi3: regulator-vccq-sdhi3 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI3 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-};
-
-&pfc {
- pinctrl-0 = <&scif_clk_pins>;
- pinctrl-names = "default";
-
- avb_pins: avb {
- groups = "avb_mdc";
- function = "avb";
- };
-
- scif1_pins: scif1 {
- groups = "scif1_data_a", "scif1_ctrl";
- function = "scif1";
- };
-
- scif2_pins: scif2 {
- groups = "scif2_data_a";
- function = "scif2";
- };
- scif_clk_pins: scif_clk {
- groups = "scif_clk_a";
- function = "scif_clk";
- };
-
- i2c2_pins: i2c2 {
- groups = "i2c2_a";
- function = "i2c2";
- };
-
- sdhi0_pins: sd0 {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <3300>;
- };
-
- sdhi0_pins_uhs: sd0_uhs {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <1800>;
- };
-
- sdhi2_pins: sd2 {
- groups = "sdhi2_data8", "sdhi2_ctrl";
- function = "sdhi2";
- power-source = <3300>;
- };
-
- sdhi2_pins_uhs: sd2_uhs {
- groups = "sdhi2_data8", "sdhi2_ctrl";
- function = "sdhi2";
- power-source = <1800>;
- };
-
- sdhi3_pins: sd3 {
- groups = "sdhi3_data4", "sdhi3_ctrl";
- function = "sdhi3";
- power-source = <3300>;
- };
-
- sdhi3_pins_uhs: sd3_uhs {
- groups = "sdhi3_data4", "sdhi3_ctrl";
- function = "sdhi3";
- power-source = <1800>;
- };
-};
-
-&avb {
- pinctrl-0 = <&avb_pins>;
- pinctrl-names = "default";
- renesas,no-ether-link;
- phy-handle = <&phy0>;
- status = "okay";
-
- phy0: ethernet-phy@0 {
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupt-parent = <&gpio2>;
- interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&extal_clk {
- clock-frequency = <16666666>;
-};
-
-&extalr_clk {
- clock-frequency = <32768>;
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-1 = <&sdhi0_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi0>;
- vqmmc-supply = <&vccq_sdhi0>;
- cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
- bus-width = <4>;
- sd-uhs-sdr50;
- status = "okay";
-};
-
-&sdhi2 {
- /* used for on-board 8bit eMMC */
- pinctrl-0 = <&sdhi2_pins>;
- pinctrl-1 = <&sdhi2_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_1p8v>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&sdhi3 {
- pinctrl-0 = <&sdhi3_pins>;
- pinctrl-1 = <&sdhi3_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi3>;
- vqmmc-supply = <&vccq_sdhi3>;
- cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
- bus-width = <4>;
- sd-uhs-sdr50;
- status = "okay";
-};
-
-&scif1 {
- pinctrl-0 = <&scif1_pins>;
- pinctrl-names = "default";
-
- uart-has-rtscts;
- status = "okay";
-};
-
-&scif2 {
- pinctrl-0 = <&scif2_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&scif_clk {
- clock-frequency = <14745600>;
-};
-
-&i2c2 {
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&wdt0 {
- timeout-sec = <60>;
- status = "okay";
-};
-
-&i2c_dvfs {
- status = "okay";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 2ec1ed5f..1f67109 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -120,6 +120,29 @@
clock-frequency = <0>;
};
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
/* External CAN clock - to be overridden by boards that provide it */
can_clk: can {
compatible = "fixed-clock";
@@ -134,6 +157,13 @@
clock-frequency = <0>;
};
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
@@ -362,6 +392,78 @@
clocks = <&cpg CPG_MOD 926>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 926>;
+ dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@e6e35000 {
+ compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+ reg = <0 0xe6e35000 0 8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@e6e36000 {
+ compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+ reg = <0 0xe6e36000 0 8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -931,6 +1033,106 @@
dma-channels = <16>;
};
+ audma0: dma-controller@ec700000 {
+ compatible = "renesas,dmac-r8a7796",
+ "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 502>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ audma1: dma-controller@ec720000 {
+ compatible = "renesas,dmac-r8a7796",
+ "renesas,rcar-dmac";
+ reg = <0 0xec720000 0 0x10000>;
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 501>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 501>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ hsusb: usb@e6590000 {
+ /* placeholder */
+ };
+
+ xhci0: usb@ee000000 {
+ /* placeholder */
+ };
+
+ ohci0: usb@ee080000 {
+ /* placeholder */
+ };
+
+ ehci0: usb@ee080100 {
+ /* placeholder */
+ };
+
+ usb2_phy0: usb-phy@ee080200 {
+ /* placeholder */
+ };
+
+ ohci1: usb@ee0a0000 {
+ /* placeholder */
+ };
+
+ ehci1: usb@ee0a0100 {
+ /* placeholder */
+ };
+
+ usb2_phy1: usb-phy@ee0a0200 {
+ /* placeholder */
+ };
+
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a7796";
reg = <0 0xee100000 0 0x2000>;
@@ -1033,5 +1235,224 @@
};
};
};
+
+ rcar_sound: sound@ec500000 {
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ /*
+ * #clock-cells is required for audio_clkout0/1/2/3
+ *
+ * clkout : #clock-cells = <0>; <&rcar_sound>;
+ * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a7796", "renesas,rcar_sound-gen3";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE R8A7796_CLK_S0D4>;
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0",
+ "src.9", "src.8", "src.7", "src.6",
+ "src.5", "src.4", "src.3", "src.2",
+ "src.1", "src.0",
+ "mix.1", "mix.0",
+ "ctu.1", "ctu.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>,
+ <&cpg 1008>, <&cpg 1009>,
+ <&cpg 1010>, <&cpg 1011>,
+ <&cpg 1012>, <&cpg 1013>,
+ <&cpg 1014>, <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0";
+ status = "disabled";
+
+ rcar_sound,dvc {
+ dvc0: dvc-0 {
+ dmas = <&audma1 0xbc>;
+ dma-names = "tx";
+ };
+ dvc1: dvc-1 {
+ dmas = <&audma1 0xbe>;
+ dma-names = "tx";
+ };
+ };
+
+ rcar_sound,mix {
+ mix0: mix-0 { };
+ mix1: mix-1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
+ rcar_sound,src {
+ src0: src-0 {
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x85>, <&audma1 0x9a>;
+ dma-names = "rx", "tx";
+ };
+ src1: src-1 {
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x87>, <&audma1 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ src2: src-2 {
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x89>, <&audma1 0x9e>;
+ dma-names = "rx", "tx";
+ };
+ src3: src-3 {
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+ dma-names = "rx", "tx";
+ };
+ src4: src-4 {
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+ dma-names = "rx", "tx";
+ };
+ src5: src-5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src-6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma1 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ src7: src-7 {
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x93>, <&audma1 0xb6>;
+ dma-names = "rx", "tx";
+ };
+ src8: src-8 {
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x95>, <&audma1 0xb8>;
+ dma-names = "rx", "tx";
+ };
+ src9: src-9 {
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x97>, <&audma1 0xba>;
+ dma-names = "rx", "tx";
+ };
+ };
+
+ rcar_sound,ssi {
+ ssi0: ssi-0 {
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi1: ssi-1 {
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi2: ssi-2 {
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi3: ssi-3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi4: ssi-4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi5: ssi-5 {
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi6: ssi-6 {
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi7: ssi-7 {
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi8: ssi-8 {
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi9: ssi-9 {
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ };
+ };
+
+ pciec0: pcie@fe000000 {
+ /* placeholder */
+ };
+
+ pciec1: pcie@ee800000 {
+ /* placeholder */
+ };
+
+ du: display@feb00000 {
+ /* placeholder */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
new file mode 100644
index 0000000..aef35e0
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -0,0 +1,629 @@
+/*
+ * Device Tree Source for common parts of Salvator-X board variants
+ *
+ * Copyright (C) 2015-2016 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/*
+ * SSI-AK4613
+ *
+ * This command is required when Playback/Capture
+ *
+ * amixer set "DVC Out" 100%
+ * amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ * amixer set "DVC Out Mute" on
+ * amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
+ * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ * amixer set "DVC Out Ramp" on
+ * aplay xxx.wav &
+ * amixer set "DVC Out" 80% // Volume Down
+ * amixer set "DVC Out" 100% // Volume Up
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ aliases {
+ serial0 = &scif2;
+ serial1 = &scif1;
+ ethernet0 = &avb;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = "serial0:115200n8";
+ };
+
+ audio_clkout: audio_clkout {
+ /*
+ * This is same as <&rcar_sound 0>
+ * but needed to avoid cs2000/rcar_sound probe dead-lock
+ */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 50000>;
+
+ brightness-levels = <256 128 64 16 8 4 0>;
+ default-brightness-level = <6>;
+
+ enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_1p8v: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ rsnd_ak4613: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&sndcpu>;
+ simple-audio-card,frame-master = <&sndcpu>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&ak4613>;
+ };
+ };
+
+ vbus0_usb2: regulator-vbus0-usb2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB20_VBUS0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vcc_sdhi0: regulator-vcc-sdhi0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+
+ vcc_sdhi3: regulator-vcc-sdhi3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI3 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi3: regulator-vccq-sdhi3 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI3 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+
+ hdmi0-out {
+ compatible = "hdmi-connector";
+ label = "HDMI0 OUT";
+ type = "a";
+
+ port {
+ hdmi0_con: endpoint {
+ };
+ };
+ };
+
+ hdmi1-out {
+ compatible = "hdmi-connector";
+ label = "HDMI1 OUT";
+ type = "a";
+
+ port {
+ hdmi1_con: endpoint {
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&adv7123_out>;
+ };
+ };
+ };
+
+ vga-encoder {
+ compatible = "adi,adv7123";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7123_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ adv7123_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
+ };
+
+ x12_clk: x12 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ /* External DU dot clocks */
+ x21_clk: x21-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <33000000>;
+ };
+
+ x22_clk: x22-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <33000000>;
+ };
+
+ x23_clk: x23-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+};
+
+&audio_clk_a {
+ clock-frequency = <22579200>;
+};
+
+&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+ renesas,no-ether-link;
+ phy-handle = <&phy0>;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&adv7123_in>;
+ };
+ };
+ port@3 {
+ lvds_connector: endpoint {
+ };
+ };
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
+&hsusb {
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ clock-frequency = <100000>;
+
+ ak4613: codec@10 {
+ compatible = "asahi-kasei,ak4613";
+ #sound-dai-cells = <0>;
+ reg = <0x10>;
+ clocks = <&rcar_sound 3>;
+
+ asahi-kasei,in1-single-end;
+ asahi-kasei,in2-single-end;
+ asahi-kasei,out1-single-end;
+ asahi-kasei,out2-single-end;
+ asahi-kasei,out3-single-end;
+ asahi-kasei,out4-single-end;
+ asahi-kasei,out5-single-end;
+ asahi-kasei,out6-single-end;
+ };
+
+ cs2000: clk_multiplier@4f {
+ #clock-cells = <0>;
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4f>;
+ clocks = <&audio_clkout>, <&x12_clk>;
+ clock-names = "clk_in", "ref_clk";
+
+ assigned-clocks = <&cs2000>;
+ assigned-clock-rates = <24576000>; /* 1/1 divide */
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ csa_vdd: adc@7c {
+ compatible = "maxim,max9611";
+ reg = <0x7c>;
+
+ shunt-resistor-micro-ohms = <5000>;
+ };
+
+ csa_dvfs: adc@7f {
+ compatible = "maxim,max9611";
+ reg = <0x7f>;
+
+ shunt-resistor-micro-ohms = <5000>;
+ };
+};
+
+&i2c_dvfs {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pcie_bus_clk {
+ clock-frequency = <100000000>;
+};
+
+&pciec0 {
+ status = "okay";
+};
+
+&pciec1 {
+ status = "okay";
+};
+
+&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
+ avb_pins: avb {
+ mux {
+ groups = "avb_link", "avb_phy_int", "avb_mdc",
+ "avb_mii";
+ function = "avb";
+ };
+
+ pins_mdc {
+ groups = "avb_mdc";
+ drive-strength = <24>;
+ };
+
+ pins_mii_tx {
+ pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+ "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+ drive-strength = <12>;
+ };
+ };
+
+ du_pins: du {
+ groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
+ function = "du";
+ };
+
+ i2c2_pins: i2c2 {
+ groups = "i2c2_a";
+ function = "i2c2";
+ };
+
+ pwm1_pins: pwm1 {
+ groups = "pwm1_a";
+ function = "pwm1";
+ };
+
+ scif1_pins: scif1 {
+ groups = "scif1_data_a", "scif1_ctrl";
+ function = "scif1";
+ };
+
+ scif2_pins: scif2 {
+ groups = "scif2_data_a";
+ function = "scif2";
+ };
+
+ scif_clk_pins: scif_clk {
+ groups = "scif_clk_a";
+ function = "scif_clk";
+ };
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <1800>;
+ };
+
+ sdhi2_pins: sd2 {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <3300>;
+ };
+
+ sdhi2_pins_uhs: sd2_uhs {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <1800>;
+ };
+
+ sdhi3_pins: sd3 {
+ groups = "sdhi3_data4", "sdhi3_ctrl";
+ function = "sdhi3";
+ power-source = <3300>;
+ };
+
+ sdhi3_pins_uhs: sd3_uhs {
+ groups = "sdhi3_data4", "sdhi3_ctrl";
+ function = "sdhi3";
+ power-source = <1800>;
+ };
+
+ sound_pins: sound {
+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+ function = "ssi";
+ };
+
+ sound_clk_pins: sound_clk {
+ groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+ "audio_clkout_a", "audio_clkout3_a";
+ function = "audio_clk";
+ };
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ mux {
+ groups = "usb1";
+ function = "usb1";
+ };
+
+ ovc {
+ pins = "GP_6_27";
+ bias-pull-up;
+ };
+
+ pwen {
+ pins = "GP_6_26";
+ bias-pull-down;
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-0 = <&pwm1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ /* audio_clkout0/1/2/3 */
+ #clock-cells = <1>;
+ clock-frequency = <11289600 12288000>;
+
+ status = "okay";
+
+ /* update <audio_clk_b> to <cs2000> */
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&cs2000>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0 &src0 &dvc0>;
+ capture = <&ssi1 &src1 &dvc1>;
+ };
+ };
+};
+
+&scif1 {
+ pinctrl-0 = <&scif1_pins>;
+ pinctrl-names = "default";
+
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ status = "okay";
+};
+
+&sdhi2 {
+ /* used for on-board 8bit eMMC */
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-1 = <&sdhi2_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ status = "okay";
+};
+
+&sdhi3 {
+ pinctrl-0 = <&sdhi3_pins>;
+ pinctrl-1 = <&sdhi3_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi3>;
+ vqmmc-supply = <&vccq_sdhi3>;
+ cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ status = "okay";
+};
+
+&ssi1 {
+ shared-pin;
+};
+
+&usb2_phy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ vbus-supply = <&vbus0_usb2>;
+ status = "okay";
+};
+
+&usb2_phy1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&wdt0 {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
+&xhci0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/salvator-x.dtsi b/arch/arm64/boot/dts/renesas/salvator-x.dtsi
new file mode 100644
index 0000000..468868c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/salvator-x.dtsi
@@ -0,0 +1,30 @@
+/*
+ * Device Tree Source for the Salvator-X board
+ *
+ * Copyright (C) 2015-2016 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "salvator-common.dtsi"
+
+/ {
+ model = "Renesas Salvator-X board";
+ compatible = "renesas,salvator-x";
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&i2c4 {
+ versaclock5: clock-generator@6a {
+ compatible = "idt,5p49v5923";
+ reg = <0x6a>;
+ #clock-cells = <1>;
+ clocks = <&x23_clk>;
+ clock-names = "xin";
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
new file mode 100644
index 0000000..81227e3
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
@@ -0,0 +1,20 @@
+/*
+ * Device Tree Source for the Salvator-X 2nd version board
+ *
+ * Copyright (C) 2015-2017 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "salvator-common.dtsi"
+
+/ {
+ model = "Renesas Salvator-X 2nd version board";
+ compatible = "renesas,salvator-xs";
+};
+
+&extal_clk {
+ clock-frequency = <16640000>;
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
new file mode 100644
index 0000000..b5c6ee0
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -0,0 +1,367 @@
+/*
+ * Device Tree Source for the R-Car Gen3 ULCB board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Renesas R-Car Gen3 ULCB board";
+
+ aliases {
+ serial0 = &scif2;
+ ethernet0 = &avb;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ audio_clkout: audio-clkout {
+ /*
+ * This is same as <&rcar_sound 0>
+ * but needed to avoid cs2000/rcar_sound probe dead-lock
+ */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ };
+
+ keyboard {
+ compatible = "gpio-keys";
+
+ key-1 {
+ linux,code = <KEY_1>;
+ label = "SW3";
+ wakeup-source;
+ debounce-interval = <20>;
+ gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led5 {
+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ };
+ led6 {
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ reg_1p8v: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ rsnd_ak4613: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&sndcpu>;
+ simple-audio-card,frame-master = <&sndcpu>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&ak4613>;
+ };
+ };
+
+ vcc_sdhi0: regulator-vcc-sdhi0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+
+ x12_clk: x12 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+};
+
+&audio_clk_a {
+ clock-frequency = <22579200>;
+};
+
+&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+ renesas,no-ether-link;
+ phy-handle = <&phy0>;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ clock-frequency = <100000>;
+
+ ak4613: codec@10 {
+ compatible = "asahi-kasei,ak4613";
+ #sound-dai-cells = <0>;
+ reg = <0x10>;
+ clocks = <&rcar_sound 3>;
+
+ asahi-kasei,in1-single-end;
+ asahi-kasei,in2-single-end;
+ asahi-kasei,out1-single-end;
+ asahi-kasei,out2-single-end;
+ asahi-kasei,out3-single-end;
+ asahi-kasei,out4-single-end;
+ asahi-kasei,out5-single-end;
+ asahi-kasei,out6-single-end;
+ };
+
+ cs2000: clk-multiplier@4f {
+ #clock-cells = <0>;
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4f>;
+ clocks = <&audio_clkout>, <&x12_clk>;
+ clock-names = "clk_in", "ref_clk";
+
+ assigned-clocks = <&cs2000>;
+ assigned-clock-rates = <24576000>; /* 1/1 divide */
+ };
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
+ avb_pins: avb {
+ mux {
+ groups = "avb_link", "avb_phy_int", "avb_mdc",
+ "avb_mii";
+ function = "avb";
+ };
+
+ pins_mdc {
+ groups = "avb_mdc";
+ drive-strength = <24>;
+ };
+
+ pins_mii_tx {
+ pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+ "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+ drive-strength = <12>;
+ };
+ };
+
+ i2c2_pins: i2c2 {
+ groups = "i2c2_a";
+ function = "i2c2";
+ };
+
+ scif2_pins: scif2 {
+ groups = "scif2_data_a";
+ function = "scif2";
+ };
+
+ scif_clk_pins: scif_clk {
+ groups = "scif_clk_a";
+ function = "scif_clk";
+ };
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <1800>;
+ };
+
+ sdhi2_pins: sd2 {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <3300>;
+ };
+
+ sdhi2_pins_uhs: sd2_uhs {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <1800>;
+ };
+
+ sound_pins: sound {
+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+ function = "ssi";
+ };
+
+ sound_clk_pins: sound-clk {
+ groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+ "audio_clkout_a", "audio_clkout3_a";
+ function = "audio_clk";
+ };
+
+ usb1_pins: usb1 {
+ groups = "usb1";
+ function = "usb1";
+ };
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ /* audio_clkout0/1/2/3 */
+ #clock-cells = <1>;
+ clock-frequency = <11289600 12288000>;
+
+ status = "okay";
+
+ /* update <audio_clk_b> to <cs2000> */
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&cs2000>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0 &src0 &dvc0>;
+ capture = <&ssi1 &src1 &dvc1>;
+ };
+ };
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ status = "okay";
+};
+
+&sdhi2 {
+ /* used for on-board 8bit eMMC */
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-1 = <&sdhi2_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ status = "okay";
+};
+
+&ssi1 {
+ shared-pin;
+};
+
+&usb2_phy1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&wdt0 {
+ timeout-sec = <60>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index b5636bb..bcfa53b 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -5,6 +5,7 @@
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
always := $(dtb-y)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 7e69f1f..0be96ce 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -372,6 +372,39 @@
<32768>;
};
+ sdmmc: dwmmc@ff500000 {
+ compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff500000 0x0 0x4000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ fifo-depth = <0x100>;
+ status = "disabled";
+ };
+
+ sdio: dwmmc@ff510000 {
+ compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff510000 0x0 0x4000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ fifo-depth = <0x100>;
+ status = "disabled";
+ };
+
+ emmc: dwmmc@ff520000 {
+ compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff520000 0x0 0x4000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ fifo-depth = <0x100>;
+ status = "disabled";
+ };
+
gmac2io: ethernet@ff540000 {
compatible = "rockchip,rk3328-gmac";
reg = <0x0 0xff540000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
new file mode 100644
index 0000000..ba1d981
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -0,0 +1,718 @@
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+
+/ {
+ model = "Firefly-RK3399 Board";
+ compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+ pwms = <&pwm0 0 25000 0>;
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7
+ 8 9 10 11 12 13 14 15
+ 16 17 18 19 20 21 22 23
+ 24 25 26 27 28 29 30 31
+ 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47
+ 48 49 50 51 52 53 54 55
+ 56 57 58 59 60 61 62 63
+ 64 65 66 67 68 69 70 71
+ 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87
+ 88 89 90 91 92 93 94 95
+ 96 97 98 99 100 101 102 103
+ 104 105 106 107 108 109 110 111
+ 112 113 114 115 116 117 118 119
+ 120 121 122 123 124 125 126 127
+ 128 129 130 131 132 133 134 135
+ 136 137 138 139 140 141 142 143
+ 144 145 146 147 148 149 150 151
+ 152 153 154 155 156 157 158 159
+ 160 161 162 163 164 165 166 167
+ 168 169 170 171 172 173 174 175
+ 176 177 178 179 180 181 182 183
+ 184 185 186 187 188 189 190 191
+ 192 193 194 195 196 197 198 199
+ 200 201 202 203 204 205 206 207
+ 208 209 210 211 212 213 214 215
+ 216 217 218 219 220 221 222 223
+ 224 225 226 227 228 229 230 231
+ 232 233 234 235 236 237 238 239
+ 240 241 242 243 244 245 246 247
+ 248 249 250 251 252 253 254 255>;
+ default-brightness-level = <200>;
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ dc_12v: dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ rt5640-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "rockchip,rt5640-codec";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Mic Jack", "MICBIAS1",
+ "IN1P", "Mic Jack",
+ "Headphone Jack", "HPOL",
+ "Headphone Jack", "HPOR";
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&rt5640>;
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pwr_en>;
+ regulator-name = "vcc3v3_pcie";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ vin-supply = <&vcc_sys>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc1v8_pmu>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc2v8_dvp: LDO_REG2 {
+ regulator-name = "vcc2v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmu: LDO_REG3 {
+ regulator-name = "vcc1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-name = "vcc_sdio";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG7 {
+ regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <0>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <300>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+
+ rt5640: rt5640@1c {
+ compatible = "realtek,rt5640";
+ reg = <0x1c>;
+ clocks = <&cru SCLK_I2S_8CH_OUT>;
+ clock-names = "mclk";
+ realtek,in1-differential;
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rt5640_hpcon>;
+ };
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ accelerometer@68 {
+ compatible = "invensense,mpu6500";
+ reg = <0x68>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&i2s0 {
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <8>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&i2s1 {
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&i2s2 {
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ bt656-supply = <&vcc1v8_dvp>;
+ audio-supply = <&vcca1v8_codec>;
+ sdmmc-supply = <&vcc_sdio>;
+ gpio1830-supply = <&vcc_3v0>;
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+ num-lanes = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreqn>;
+ status = "okay";
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pinctrl {
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ lcd-panel {
+ lcd_panel_reset: lcd-panel-reset {
+ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pcie {
+ pcie_pwr_en: pcie-pwr-en {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie_3g_drv: pcie-3g-drv {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pmic {
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ rt5640 {
+ rt5640_hpcon: rt5640-hpcon {
+ rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ keep-power-in-suspend;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 0d960b7..eb50593 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -44,7 +44,7 @@
#include <dt-bindings/input/input.h>
#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
+#include "rk3399-op1-opp.dtsi"
/ {
chosen {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
new file mode 100644
index 0000000..be7fe63
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
@@ -0,0 +1,145 @@
+/*
+ * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ cluster0_opp: opp-table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <800000>;
+ clock-latency-ns = <40000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <825000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <850000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <900000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <975000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <1100000>;
+ };
+ opp06 {
+ opp-hz = /bits/ 64 <1512000000>;
+ opp-microvolt = <1150000>;
+ };
+ };
+
+ cluster1_opp: opp-table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <800000>;
+ clock-latency-ns = <40000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <800000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <825000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <850000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <900000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <975000>;
+ };
+ opp06 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <1050000>;
+ };
+ opp07 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1150000>;
+ };
+ opp08 {
+ opp-hz = /bits/ 64 <2016000000>;
+ opp-microvolt = <1250000>;
+ };
+ };
+};
+
+&cpu_l0 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l1 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l2 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l3 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_b0 {
+ operating-points-v2 = <&cluster1_opp>;
+};
+
+&cpu_b1 {
+ operating-points-v2 = <&cluster1_opp>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
index dd82e16..c83460d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
@@ -56,22 +56,18 @@
};
opp02 {
opp-hz = /bits/ 64 <816000000>;
- opp-microvolt = <800000>;
+ opp-microvolt = <850000>;
};
opp03 {
opp-hz = /bits/ 64 <1008000000>;
- opp-microvolt = <875000>;
+ opp-microvolt = <925000>;
};
opp04 {
opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <925000>;
+ opp-microvolt = <1000000>;
};
opp05 {
opp-hz = /bits/ 64 <1416000000>;
- opp-microvolt = <1050000>;
- };
- opp06 {
- opp-hz = /bits/ 64 <1512000000>;
opp-microvolt = <1125000>;
};
};
@@ -107,15 +103,11 @@
};
opp06 {
opp-hz = /bits/ 64 <1608000000>;
- opp-microvolt = <1075000>;
+ opp-microvolt = <1100000>;
};
opp07 {
opp-hz = /bits/ 64 <1800000000>;
- opp-microvolt = <1150000>;
- };
- opp08 {
- opp-hz = /bits/ 64 <2016000000>;
- opp-microvolt = <1250000>;
+ opp-microvolt = <1200000>;
};
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index f4f3c96..69c56f7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -56,6 +56,7 @@
#size-cells = <2>;
aliases {
+ ethernet0 = &gmac;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
@@ -220,7 +221,7 @@
#size-cells = <2>;
#interrupt-cells = <1>;
aspm-no-l0s;
- bus-range = <0x0 0x1>;
+ bus-range = <0x0 0x1f>;
clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
<&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
clock-names = "aclk", "aclk-perf",
@@ -239,8 +240,8 @@
msi-map = <0x0 &its 0x0 0x1000>;
phys = <&pcie_phy>;
phy-names = "pcie-phy";
- ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000
- 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>;
+ ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000
+ 0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
<&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
<&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
@@ -769,11 +770,6 @@
status = "disabled";
};
- qos_sd: qos@ffa74000 {
- compatible = "syscon";
- reg = <0x0 0xffa74000 0x0 0x20>;
- };
-
qos_emmc: qos@ffa58000 {
compatible = "syscon";
reg = <0x0 0xffa58000 0x0 0x20>;
@@ -784,6 +780,41 @@
reg = <0x0 0xffa5c000 0x0 0x20>;
};
+ qos_pcie: qos@ffa60080 {
+ compatible = "syscon";
+ reg = <0x0 0xffa60080 0x0 0x20>;
+ };
+
+ qos_usb_host0: qos@ffa60100 {
+ compatible = "syscon";
+ reg = <0x0 0xffa60100 0x0 0x20>;
+ };
+
+ qos_usb_host1: qos@ffa60180 {
+ compatible = "syscon";
+ reg = <0x0 0xffa60180 0x0 0x20>;
+ };
+
+ qos_usb_otg0: qos@ffa70000 {
+ compatible = "syscon";
+ reg = <0x0 0xffa70000 0x0 0x20>;
+ };
+
+ qos_usb_otg1: qos@ffa70080 {
+ compatible = "syscon";
+ reg = <0x0 0xffa70080 0x0 0x20>;
+ };
+
+ qos_sd: qos@ffa74000 {
+ compatible = "syscon";
+ reg = <0x0 0xffa74000 0x0 0x20>;
+ };
+
+ qos_sdioaudio: qos@ffa76000 {
+ compatible = "syscon";
+ reg = <0x0 0xffa76000 0x0 0x20>;
+ };
+
qos_hdcp: qos@ffa90000 {
compatible = "syscon";
reg = <0x0 0xffa90000 0x0 0x20>;
@@ -854,6 +885,11 @@
reg = <0x0 0xffad0000 0x0 0x20>;
};
+ qos_perihp: qos@ffad8080 {
+ compatible = "syscon";
+ reg = <0x0 0xffad8080 0x0 0x20>;
+ };
+
qos_gpu: qos@ffae0000 {
compatible = "syscon";
reg = <0x0 0xffae0000 0x0 0x20>;
@@ -1676,6 +1712,91 @@
};
};
+ sdio0 {
+ sdio0_bus1: sdio0-bus1 {
+ rockchip,pins =
+ <2 RK_PC4 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_bus4: sdio0-bus4 {
+ rockchip,pins =
+ <2 RK_PC4 RK_FUNC_1 &pcfg_pull_up>,
+ <2 RK_PC5 RK_FUNC_1 &pcfg_pull_up>,
+ <2 RK_PC6 RK_FUNC_1 &pcfg_pull_up>,
+ <2 RK_PC7 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_cmd: sdio0-cmd {
+ rockchip,pins =
+ <2 RK_PD0 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_clk: sdio0-clk {
+ rockchip,pins =
+ <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ sdio0_cd: sdio0-cd {
+ rockchip,pins =
+ <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_pwr: sdio0-pwr {
+ rockchip,pins =
+ <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_bkpwr: sdio0-bkpwr {
+ rockchip,pins =
+ <2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_wp: sdio0-wp {
+ rockchip,pins =
+ <0 RK_PA3 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_int: sdio0-int {
+ rockchip,pins =
+ <0 RK_PA4 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_bus1: sdmmc-bus1 {
+ rockchip,pins =
+ <4 RK_PB0 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins =
+ <4 RK_PB0 RK_FUNC_1 &pcfg_pull_up>,
+ <4 RK_PB1 RK_FUNC_1 &pcfg_pull_up>,
+ <4 RK_PB2 RK_FUNC_1 &pcfg_pull_up>,
+ <4 RK_PB3 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins =
+ <4 RK_PB4 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins =
+ <4 RK_PB5 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdmmc_cd: sdmcc-cd {
+ rockchip,pins =
+ <0 RK_PA7 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdmmc_wp: sdmmc-wp {
+ rockchip,pins =
+ <0 RK_PB0 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
sleep {
ap_pwroff: ap-pwroff {
rockchip,pins = <1 5 RK_FUNC_1 &pcfg_pull_none>;
@@ -1691,6 +1812,11 @@
rockchip,pins =
<4 21 RK_FUNC_1 &pcfg_pull_none>;
};
+
+ spdif_bus_1: spdif-bus-1 {
+ rockchip,pins =
+ <3 RK_PC0 RK_FUNC_3 &pcfg_pull_none>;
+ };
};
spi0 {
@@ -1950,6 +2076,19 @@
};
};
+ hdmi {
+ hdmi_i2c_xfer: hdmi-i2c-xfer {
+ rockchip,pins =
+ <4 RK_PC1 RK_FUNC_3 &pcfg_pull_none>,
+ <4 RK_PC0 RK_FUNC_3 &pcfg_pull_none>;
+ };
+
+ hdmi_cec: hdmi-cec {
+ rockchip,pins =
+ <4 RK_PC7 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
pcie {
pcie_clkreqn: pci-clkreqn {
rockchip,pins =
@@ -1960,6 +2099,16 @@
rockchip,pins =
<4 24 RK_FUNC_1 &pcfg_pull_none>;
};
+
+ pcie_clkreqn_cpm: pci-clkreqn-cpm {
+ rockchip,pins =
+ <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie_clkreqnb_cpm: pci-clkreqnb-cpm {
+ rockchip,pins =
+ <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile
index 5538598..4a13a3a 100644
--- a/arch/arm64/boot/dts/socionext/Makefile
+++ b/arch/arm64/boot/dts/socionext/Makefile
@@ -1,5 +1,7 @@
dtb-$(CONFIG_ARCH_UNIPHIER) += \
+ uniphier-ld11-global.dtb \
uniphier-ld11-ref.dtb \
+ uniphier-ld20-global.dtb \
uniphier-ld20-ref.dtb
always := $(dtb-y)
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
new file mode 100644
index 0000000..1153570
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
@@ -0,0 +1,70 @@
+/*
+ * Device Tree Source for UniPhier LD11 Global Board
+ *
+ * Copyright (C) 2016-2017 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+/include/ "uniphier-ld11.dtsi"
+
+/ {
+ model = "UniPhier LD11 Global Board (REF_LD11_GP)";
+ compatible = "socionext,uniphier-ld11-global",
+ "socionext,uniphier-ld11";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0x40000000>;
+ };
+};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "st,24c64", "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
index 0173e93..cc8ebe3 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
@@ -4,43 +4,7 @@
* Copyright (C) 2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/dts-v1/;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index 151c043..bdce5b8 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -4,46 +4,10 @@
* Copyright (C) 2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
-/memreserve/ 0x80000000 0x00080000;
+/memreserve/ 0x80000000 0x02000000;
/ {
compatible = "socionext,uniphier-ld11";
@@ -89,31 +53,31 @@
compatible = "operating-points-v2";
opp-shared;
- opp@245000000 {
+ opp-245000000 {
opp-hz = /bits/ 64 <245000000>;
clock-latency-ns = <300>;
};
- opp@250000000 {
+ opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
clock-latency-ns = <300>;
};
- opp@490000000 {
+ opp-490000000 {
opp-hz = /bits/ 64 <490000000>;
clock-latency-ns = <300>;
};
- opp@500000000 {
+ opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
clock-latency-ns = <300>;
};
- opp@653334000 {
+ opp-653334000 {
opp-hz = /bits/ 64 <653334000>;
clock-latency-ns = <300>;
};
- opp@666667000 {
+ opp-666667000 {
opp-hz = /bits/ 64 <666667000>;
clock-latency-ns = <300>;
};
- opp@980000000 {
+ opp-980000000 {
opp-hz = /bits/ 64 <980000000>;
clock-latency-ns = <300>;
};
@@ -268,7 +232,7 @@
pinctrl-0 = <&pinctrl_system_bus>;
};
- smpctrl@59800000 {
+ smpctrl@59801000 {
compatible = "socionext,uniphier-smpctrl";
reg = <0x59801000 0x400>;
};
@@ -310,6 +274,11 @@
bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
+ cdns,phy-input-delay-legacy = <4>;
+ cdns,phy-input-delay-mmc-highspeed = <2>;
+ cdns,phy-input-delay-mmc-ddr = <3>;
+ cdns,phy-dll-delay-sdclk = <21>;
+ cdns,phy-dll-delay-sdclk-hsmmc = <21>;
};
usb0: usb@5a800100 {
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
new file mode 100644
index 0000000..9f620d4
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
@@ -0,0 +1,52 @@
+/*
+ * Device Tree Source for UniPhier LD20 Global Board
+ *
+ * Copyright (C) 2015-2017 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+/include/ "uniphier-ld20.dtsi"
+
+/ {
+ model = "UniPhier LD20 Global Board (REF_LD20_GP)";
+ compatible = "socionext,uniphier-ld20-global",
+ "socionext,uniphier-ld20";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0xc0000000>;
+ };
+};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
index fca4c47..494166a 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
@@ -4,43 +4,7 @@
* Copyright (C) 2015-2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/dts-v1/;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index 6193f11..de1e753 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -4,46 +4,10 @@
* Copyright (C) 2015-2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
-/memreserve/ 0x80000000 0x00080000;
+/memreserve/ 0x80000000 0x02000000;
/ {
compatible = "socionext,uniphier-ld20";
@@ -116,35 +80,35 @@
compatible = "operating-points-v2";
opp-shared;
- opp@250000000 {
+ opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
clock-latency-ns = <300>;
};
- opp@275000000 {
+ opp-275000000 {
opp-hz = /bits/ 64 <275000000>;
clock-latency-ns = <300>;
};
- opp@500000000 {
+ opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
clock-latency-ns = <300>;
};
- opp@550000000 {
+ opp-550000000 {
opp-hz = /bits/ 64 <550000000>;
clock-latency-ns = <300>;
};
- opp@666667000 {
+ opp-666667000 {
opp-hz = /bits/ 64 <666667000>;
clock-latency-ns = <300>;
};
- opp@733334000 {
+ opp-733334000 {
opp-hz = /bits/ 64 <733334000>;
clock-latency-ns = <300>;
};
- opp@1000000000 {
+ opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
clock-latency-ns = <300>;
};
- opp@1100000000 {
+ opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
clock-latency-ns = <300>;
};
@@ -154,35 +118,35 @@
compatible = "operating-points-v2";
opp-shared;
- opp@250000000 {
+ opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
clock-latency-ns = <300>;
};
- opp@275000000 {
+ opp-275000000 {
opp-hz = /bits/ 64 <275000000>;
clock-latency-ns = <300>;
};
- opp@500000000 {
+ opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
clock-latency-ns = <300>;
};
- opp@550000000 {
+ opp-550000000 {
opp-hz = /bits/ 64 <550000000>;
clock-latency-ns = <300>;
};
- opp@666667000 {
+ opp-666667000 {
opp-hz = /bits/ 64 <666667000>;
clock-latency-ns = <300>;
};
- opp@733334000 {
+ opp-733334000 {
opp-hz = /bits/ 64 <733334000>;
clock-latency-ns = <300>;
};
- opp@1000000000 {
+ opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
clock-latency-ns = <300>;
};
- opp@1100000000 {
+ opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
clock-latency-ns = <300>;
};
@@ -337,7 +301,7 @@
pinctrl-0 = <&pinctrl_system_bus>;
};
- smpctrl@59800000 {
+ smpctrl@59801000 {
compatible = "socionext,uniphier-smpctrl";
reg = <0x59801000 0x400>;
};
@@ -384,6 +348,11 @@
bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
+ cdns,phy-input-delay-legacy = <4>;
+ cdns,phy-input-delay-mmc-highspeed = <2>;
+ cdns,phy-input-delay-mmc-ddr = <3>;
+ cdns,phy-dll-delay-sdclk = <21>;
+ cdns,phy-dll-delay-sdclk-hsmmc = <21>;
};
soc-glue@5f800000 {
diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
index 316dc71..d83bf78 100644
--- a/arch/arm64/boot/dts/zte/zx296718.dtsi
+++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
@@ -118,27 +118,27 @@
compatible = "operating-points-v2";
opp-shared;
- opp@500000000 {
+ opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
clock-latency-ns = <500000>;
};
- opp@648000000 {
+ opp-648000000 {
opp-hz = /bits/ 64 <648000000>;
clock-latency-ns = <500000>;
};
- opp@800000000 {
+ opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
clock-latency-ns = <500000>;
};
- opp@1000000000 {
+ opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
clock-latency-ns = <500000>;
};
- opp@1188000000 {
+ opp-1188000000 {
opp-hz = /bits/ 64 <1188000000>;
clock-latency-ns = <500000>;
};
diff --git a/include/dt-bindings/clock/bcm-sr.h b/include/dt-bindings/clock/bcm-sr.h
new file mode 100644
index 0000000..cff6c6f
--- /dev/null
+++ b/include/dt-bindings/clock/bcm-sr.h
@@ -0,0 +1,101 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _CLOCK_BCM_SR_H
+#define _CLOCK_BCM_SR_H
+
+/* GENPLL 0 clock channel ID SCR HSLS FS PCIE */
+#define BCM_SR_GENPLL0 0
+#define BCM_SR_GENPLL0_SATA_CLK 1
+#define BCM_SR_GENPLL0_SCR_CLK 2
+#define BCM_SR_GENPLL0_250M_CLK 3
+#define BCM_SR_GENPLL0_PCIE_AXI_CLK 4
+#define BCM_SR_GENPLL0_PAXC_AXI_X2_CLK 5
+#define BCM_SR_GENPLL0_PAXC_AXI_CLK 6
+
+/* GENPLL 1 clock channel ID MHB PCIE NITRO */
+#define BCM_SR_GENPLL1 0
+#define BCM_SR_GENPLL1_PCIE_TL_CLK 1
+#define BCM_SR_GENPLL1_MHB_APB_CLK 2
+
+/* GENPLL 2 clock channel ID NITRO MHB*/
+#define BCM_SR_GENPLL2 0
+#define BCM_SR_GENPLL2_NIC_CLK 1
+#define BCM_SR_GENPLL2_250_NITRO_CLK 2
+#define BCM_SR_GENPLL2_125_NITRO_CLK 3
+#define BCM_SR_GENPLL2_CHIMP_CLK 4
+
+/* GENPLL 3 HSLS clock channel ID */
+#define BCM_SR_GENPLL3 0
+#define BCM_SR_GENPLL3_HSLS_CLK 1
+#define BCM_SR_GENPLL3_SDIO_CLK 2
+
+/* GENPLL 4 SCR clock channel ID */
+#define BCM_SR_GENPLL4 0
+#define BCM_SR_GENPLL4_CCN_CLK 1
+
+/* GENPLL 5 FS4 clock channel ID */
+#define BCM_SR_GENPLL5 0
+#define BCM_SR_GENPLL5_FS_CLK 1
+#define BCM_SR_GENPLL5_SPU_CLK 2
+
+/* GENPLL 6 NITRO clock channel ID */
+#define BCM_SR_GENPLL6 0
+#define BCM_SR_GENPLL6_48_USB_CLK 1
+
+/* LCPLL0 clock channel ID */
+#define BCM_SR_LCPLL0 0
+#define BCM_SR_LCPLL0_SATA_REF_CLK 1
+#define BCM_SR_LCPLL0_USB_REF_CLK 2
+#define BCM_SR_LCPLL0_SATA_REFPN_CLK 3
+
+/* LCPLL1 clock channel ID */
+#define BCM_SR_LCPLL1 0
+#define BCM_SR_LCPLL1_WAN_CLK 1
+
+/* LCPLL PCIE clock channel ID */
+#define BCM_SR_LCPLL_PCIE 0
+#define BCM_SR_LCPLL_PCIE_PHY_REF_CLK 1
+
+/* GENPLL EMEM0 clock channel ID */
+#define BCM_SR_EMEMPLL0 0
+#define BCM_SR_EMEMPLL0_EMEM_CLK 1
+
+/* GENPLL EMEM0 clock channel ID */
+#define BCM_SR_EMEMPLL1 0
+#define BCM_SR_EMEMPLL1_EMEM_CLK 1
+
+/* GENPLL EMEM0 clock channel ID */
+#define BCM_SR_EMEMPLL2 0
+#define BCM_SR_EMEMPLL2_EMEM_CLK 1
+
+#endif /* _CLOCK_BCM_SR_H */
diff --git a/include/dt-bindings/pinctrl/brcm,pinctrl-stingray.h b/include/dt-bindings/pinctrl/brcm,pinctrl-stingray.h
new file mode 100644
index 0000000..caa6c66
--- /dev/null
+++ b/include/dt-bindings/pinctrl/brcm,pinctrl-stingray.h
@@ -0,0 +1,68 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DT_BINDINGS_PINCTRL_BRCM_STINGRAY_H__
+#define __DT_BINDINGS_PINCTRL_BRCM_STINGRAY_H__
+
+/* Alternate functions available in MUX controller */
+#define MODE_NITRO 0
+#define MODE_NAND 1
+#define MODE_PNOR 2
+#define MODE_GPIO 3
+
+/* Pad configuration attribute */
+#define PAD_SLEW_RATE_ENA (1 << 0)
+#define PAD_SLEW_RATE_ENA_MASK (1 << 0)
+
+#define PAD_DRIVE_STRENGTH_2_MA (0 << 1)
+#define PAD_DRIVE_STRENGTH_4_MA (1 << 1)
+#define PAD_DRIVE_STRENGTH_6_MA (2 << 1)
+#define PAD_DRIVE_STRENGTH_8_MA (3 << 1)
+#define PAD_DRIVE_STRENGTH_10_MA (4 << 1)
+#define PAD_DRIVE_STRENGTH_12_MA (5 << 1)
+#define PAD_DRIVE_STRENGTH_14_MA (6 << 1)
+#define PAD_DRIVE_STRENGTH_16_MA (7 << 1)
+#define PAD_DRIVE_STRENGTH_MASK (7 << 1)
+
+#define PAD_PULL_UP_ENA (1 << 4)
+#define PAD_PULL_UP_ENA_MASK (1 << 4)
+
+#define PAD_PULL_DOWN_ENA (1 << 5)
+#define PAD_PULL_DOWN_ENA_MASK (1 << 5)
+
+#define PAD_INPUT_PATH_DIS (1 << 6)
+#define PAD_INPUT_PATH_DIS_MASK (1 << 6)
+
+#define PAD_HYSTERESIS_ENA (1 << 7)
+#define PAD_HYSTERESIS_ENA_MASK (1 << 7)
+
+#endif