ARM: pxa: Use - instead of @ for DT OPP entries
Compiling the DT file with W=1, DTC warns like follows:
Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property
Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index e0fab48..5f1d6da 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -141,37 +141,37 @@
pxa270_opp_table: opp_table0 {
compatible = "operating-points-v2";
- opp@104000000 {
+ opp-104000000 {
opp-hz = /bits/ 64 <104000000>;
opp-microvolt = <900000 900000 1705000>;
clock-latency-ns = <20>;
};
- opp@156000000 {
+ opp-156000000 {
opp-hz = /bits/ 64 <156000000>;
opp-microvolt = <1000000 1000000 1705000>;
clock-latency-ns = <20>;
};
- opp@208000000 {
+ opp-208000000 {
opp-hz = /bits/ 64 <208000000>;
opp-microvolt = <1180000 1180000 1705000>;
clock-latency-ns = <20>;
};
- opp@312000000 {
+ opp-312000000 {
opp-hz = /bits/ 64 <312000000>;
opp-microvolt = <1250000 1250000 1705000>;
clock-latency-ns = <20>;
};
- opp@416000000 {
+ opp-416000000 {
opp-hz = /bits/ 64 <416000000>;
opp-microvolt = <1350000 1350000 1705000>;
clock-latency-ns = <20>;
};
- opp@520000000 {
+ opp-520000000 {
opp-hz = /bits/ 64 <520000000>;
opp-microvolt = <1450000 1450000 1705000>;
clock-latency-ns = <20>;
};
- opp@624000000 {
+ opp-624000000 {
opp-hz = /bits/ 64 <624000000>;
opp-microvolt = <1550000 1550000 1705000>;
clock-latency-ns = <20>;