net: dsa: pass bridge down to drivers
Some DSA drivers may or may not support multiple software bridges on top
of an hardware switch.
It is more convenient for them to access the bridge's net_device for
finer configuration.
Removing the need to craft and access a bitmask also simplifies the
code.
This patch changes the signature of bridge related functions, update DSA
drivers, and removes dsa_slave_br_port_mask.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt
index aa9c1f9..ebf2153 100644
--- a/Documentation/networking/dsa/dsa.txt
+++ b/Documentation/networking/dsa/dsa.txt
@@ -524,17 +524,14 @@
- port_join_bridge: bridge layer function invoked when a given switch port is
added to a bridge, this function should be doing the necessary at the switch
level to permit the joining port from being added to the relevant logical
- domain for it to ingress/egress traffic with other members of the bridge. DSA
- does nothing but calculate a bitmask of switch ports currently members of the
- specified bridge being requested the join
+ domain for it to ingress/egress traffic with other members of the bridge.
- port_leave_bridge: bridge layer function invoked when a given switch port is
removed from a bridge, this function should be doing the necessary at the
switch level to deny the leaving port from ingress/egress traffic from the
remaining bridge members. When the port leaves the bridge, it should be aged
out at the switch hardware for the switch to (re) learn MAC addresses behind
- this port. DSA calculates the bitmask of ports still members of the bridge
- being left
+ this port.
- port_stp_update: bridge layer function invoked when a given switch port STP
state is computed by the bridge layer and should be propagated to switch
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 6f946fe..3f62759 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -483,16 +483,17 @@
}
static int bcm_sf2_sw_br_join(struct dsa_switch *ds, int port,
- u32 br_port_mask)
+ struct net_device *bridge)
{
struct bcm_sf2_priv *priv = ds_to_priv(ds);
unsigned int i;
u32 reg, p_ctl;
+ priv->port_sts[port].bridge_dev = bridge;
p_ctl = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(port));
for (i = 0; i < priv->hw_params.num_ports; i++) {
- if (!((1 << i) & br_port_mask))
+ if (priv->port_sts[i].bridge_dev != bridge)
continue;
/* Add this local port to the remote port VLAN control
@@ -515,10 +516,10 @@
return 0;
}
-static int bcm_sf2_sw_br_leave(struct dsa_switch *ds, int port,
- u32 br_port_mask)
+static int bcm_sf2_sw_br_leave(struct dsa_switch *ds, int port)
{
struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ struct net_device *bridge = priv->port_sts[port].bridge_dev;
unsigned int i;
u32 reg, p_ctl;
@@ -526,7 +527,7 @@
for (i = 0; i < priv->hw_params.num_ports; i++) {
/* Don't touch the remaining ports */
- if (!((1 << i) & br_port_mask))
+ if (priv->port_sts[i].bridge_dev != bridge)
continue;
reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(i));
@@ -541,6 +542,7 @@
core_writel(priv, p_ctl, CORE_PORT_VLAN_CTL_PORT(port));
priv->port_sts[port].vlan_ctl_mask = p_ctl;
+ priv->port_sts[port].bridge_dev = NULL;
return 0;
}
diff --git a/drivers/net/dsa/bcm_sf2.h b/drivers/net/dsa/bcm_sf2.h
index 6bba1c9..200b1f5 100644
--- a/drivers/net/dsa/bcm_sf2.h
+++ b/drivers/net/dsa/bcm_sf2.h
@@ -50,6 +50,8 @@
struct ethtool_eee eee;
u32 vlan_ctl_mask;
+
+ struct net_device *bridge_dev;
};
struct bcm_sf2_arl_entry {
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index b0e00ed..2e515e8 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -1889,13 +1889,22 @@
return err;
}
-int mv88e6xxx_port_bridge_join(struct dsa_switch *ds, int port, u32 members)
+int mv88e6xxx_port_bridge_join(struct dsa_switch *ds, int port,
+ struct net_device *bridge)
{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+ ps->ports[port].bridge_dev = bridge;
+
return 0;
}
-int mv88e6xxx_port_bridge_leave(struct dsa_switch *ds, int port, u32 members)
+int mv88e6xxx_port_bridge_leave(struct dsa_switch *ds, int port)
{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+ ps->ports[port].bridge_dev = NULL;
+
return 0;
}
diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
index 63a6f58..260b491 100644
--- a/drivers/net/dsa/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx.h
@@ -380,6 +380,7 @@
};
struct mv88e6xxx_priv_port {
+ struct net_device *bridge_dev;
u8 state;
};
@@ -481,8 +482,9 @@
int mv88e6xxx_get_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e);
int mv88e6xxx_set_eee(struct dsa_switch *ds, int port,
struct phy_device *phydev, struct ethtool_eee *e);
-int mv88e6xxx_port_bridge_join(struct dsa_switch *ds, int port, u32 members);
-int mv88e6xxx_port_bridge_leave(struct dsa_switch *ds, int port, u32 members);
+int mv88e6xxx_port_bridge_join(struct dsa_switch *ds, int port,
+ struct net_device *bridge);
+int mv88e6xxx_port_bridge_leave(struct dsa_switch *ds, int port);
int mv88e6xxx_port_stp_update(struct dsa_switch *ds, int port, u8 state);
int mv88e6xxx_port_vlan_prepare(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 26a0e86..1c845d7 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -297,9 +297,8 @@
* Bridge integration
*/
int (*port_join_bridge)(struct dsa_switch *ds, int port,
- u32 br_port_mask);
- int (*port_leave_bridge)(struct dsa_switch *ds, int port,
- u32 br_port_mask);
+ struct net_device *bridge);
+ int (*port_leave_bridge)(struct dsa_switch *ds, int port);
int (*port_stp_update)(struct dsa_switch *ds, int port,
u8 state);
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index ab24521..ab515df 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -385,31 +385,6 @@
return -EOPNOTSUPP;
}
-/* Return a bitmask of all ports being currently bridged within a given bridge
- * device. Note that on leave, the mask will still return the bitmask of ports
- * currently bridged, prior to port removal, and this is exactly what we want.
- */
-static u32 dsa_slave_br_port_mask(struct dsa_switch *ds,
- struct net_device *bridge)
-{
- struct dsa_slave_priv *p;
- unsigned int port;
- u32 mask = 0;
-
- for (port = 0; port < DSA_MAX_PORTS; port++) {
- if (!dsa_is_port_initialized(ds, port))
- continue;
-
- p = netdev_priv(ds->ports[port]);
-
- if (ds->ports[port]->priv_flags & IFF_BRIDGE_PORT &&
- p->bridge_dev == bridge)
- mask |= 1 << port;
- }
-
- return mask;
-}
-
static int dsa_slave_stp_update(struct net_device *dev, u8 state)
{
struct dsa_slave_priv *p = netdev_priv(dev);
@@ -533,8 +508,7 @@
p->bridge_dev = br;
if (ds->drv->port_join_bridge)
- ret = ds->drv->port_join_bridge(ds, p->port,
- dsa_slave_br_port_mask(ds, br));
+ ret = ds->drv->port_join_bridge(ds, p->port, br);
return ret;
}
@@ -547,8 +521,7 @@
if (ds->drv->port_leave_bridge)
- ret = ds->drv->port_leave_bridge(ds, p->port,
- dsa_slave_br_port_mask(ds, p->bridge_dev));
+ ret = ds->drv->port_leave_bridge(ds, p->port);
p->bridge_dev = NULL;