scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
In cases when lpfc_enable_pci_dev() fails, lpfc_printf_log() with
LOG_TRACE_EVENT set will call lpfc_dmp_dbg() which uses the
phba->port_list_lock.
However, phba->port_list_lock does not get initialized until
lpfc_setup_driver_resource_phase1(). Thus, any initialization routine with
LOG_TRACE_EVENT log message prior to lpfc_setup_driver_resource_phase1()
will crash.
Revert LOG_TRACE_EVENT back to LOG_INIT for all log messages in routines
prior to lpfc_setup_driver_resource_phase1().
Link: https://lore.kernel.org/r/20211020211417.88754-2-jsmart2021@gmail.com
CC: Zheyu Ma <zheyuma97@gmail.com>
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 34b5d04..469045b 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -7385,7 +7385,7 @@ lpfc_enable_pci_dev(struct lpfc_hba *phba)
out_disable_device:
pci_disable_device(pdev);
out_error:
- lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1401 Failed to enable pci device\n");
return -ENODEV;
}
@@ -8428,7 +8428,7 @@ lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
phba->lpfc_stop_port = lpfc_stop_port_s4;
break;
default:
- lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1431 Invalid HBA PCI-device group: 0x%x\n",
dev_grp);
return -ENODEV;
@@ -11661,7 +11661,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
/* There is no SLI3 failback for SLI4 devices. */
if (bf_get(lpfc_sli_intf_valid, &phba->sli4_hba.sli_intf) !=
LPFC_SLI_INTF_VALID) {
- lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2894 SLI_INTF reg contents invalid "
"sli_intf reg 0x%x\n",
phba->sli4_hba.sli_intf.word0);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 67844fc..f1bd36b 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -5115,7 +5115,7 @@ lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
phba->lpfc_scsi_prep_cmnd_buf = lpfc_scsi_prep_cmnd_buf_s4;
break;
default:
- lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1418 Invalid HBA PCI-device group: 0x%x\n",
dev_grp);
return -ENODEV;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index d800c6a..244e7d6 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -10026,7 +10026,7 @@ lpfc_mbox_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
phba->lpfc_sli_brdready = lpfc_sli_brdready_s4;
break;
default:
- lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1420 Invalid HBA PCI-device group: 0x%x\n",
dev_grp);
return -ENODEV;
@@ -11194,7 +11194,7 @@ lpfc_sli_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
phba->__lpfc_sli_issue_fcp_io = __lpfc_sli_issue_fcp_io_s4;
break;
default:
- lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1419 Invalid HBA PCI-device group: 0x%x\n",
dev_grp);
return -ENODEV;