ASoC: fsl_esai: spba clock is needed by esai device
ESAI need to enable the spba clock, when sdma is using share peripheral
script. In this case, there is two spba master port is used, if don't
enable the clock, the spba bus will have arbitration issue, which may
cause read/write wrong data from/to ESAI registers.
Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index 59f234e..6746f76 100644
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -35,6 +35,7 @@
* @coreclk: clock source to access register
* @extalclk: esai clock source to derive HCK, SCK and FS
* @fsysclk: system clock source to derive HCK, SCK and FS
+ * @spbaclk: SPBA clock (optional, depending on SoC design)
* @fifo_depth: depth of tx/rx FIFO
* @slot_width: width of each DAI slot
* @slots: number of slots
@@ -54,6 +55,7 @@
struct clk *coreclk;
struct clk *extalclk;
struct clk *fsysclk;
+ struct clk *spbaclk;
u32 fifo_depth;
u32 slot_width;
u32 slots;
@@ -469,6 +471,11 @@
ret = clk_prepare_enable(esai_priv->coreclk);
if (ret)
return ret;
+ if (!IS_ERR(esai_priv->spbaclk)) {
+ ret = clk_prepare_enable(esai_priv->spbaclk);
+ if (ret)
+ goto err_spbaclk;
+ }
if (!IS_ERR(esai_priv->extalclk)) {
ret = clk_prepare_enable(esai_priv->extalclk);
if (ret)
@@ -499,6 +506,9 @@
if (!IS_ERR(esai_priv->extalclk))
clk_disable_unprepare(esai_priv->extalclk);
err_extalck:
+ if (!IS_ERR(esai_priv->spbaclk))
+ clk_disable_unprepare(esai_priv->spbaclk);
+err_spbaclk:
clk_disable_unprepare(esai_priv->coreclk);
return ret;
@@ -564,6 +574,8 @@
clk_disable_unprepare(esai_priv->fsysclk);
if (!IS_ERR(esai_priv->extalclk))
clk_disable_unprepare(esai_priv->extalclk);
+ if (!IS_ERR(esai_priv->spbaclk))
+ clk_disable_unprepare(esai_priv->spbaclk);
clk_disable_unprepare(esai_priv->coreclk);
}
@@ -819,6 +831,11 @@
dev_warn(&pdev->dev, "failed to get fsys clock: %ld\n",
PTR_ERR(esai_priv->fsysclk));
+ esai_priv->spbaclk = devm_clk_get(&pdev->dev, "spba");
+ if (IS_ERR(esai_priv->spbaclk))
+ dev_warn(&pdev->dev, "failed to get spba clock: %ld\n",
+ PTR_ERR(esai_priv->spbaclk));
+
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);