Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux into next
Freescale updates from Scott:
"Highlights include 8xx optimizations, 32-bit checksum optimizations,
86xx consolidation, e5500/e6500 cpu hotplug, more fman and other dt
bits, and minor fixes/cleanup."
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
index 1fc5328..55c2c03 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
@@ -315,6 +315,16 @@
Value type: <phandle>
Definition: A phandle for 1EEE1588 timer.
+- pcsphy-handle
+ Usage required for "fsl,fman-memac" MACs
+ Value type: <phandle>
+ Definition: A phandle for pcsphy.
+
+- tbi-handle
+ Usage required for "fsl,fman-dtsec" MACs
+ Value type: <phandle>
+ Definition: A phandle for tbiphy.
+
EXAMPLE
fman1_tx28: port@a8000 {
@@ -340,6 +350,7 @@
reg = <0xe0000 0x1000>;
fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
ptp-timer = <&ptp-timer>;
+ tbi-handle = <&tbi0>;
};
============================================================================
@@ -415,6 +426,13 @@
The settings and programming routines for internal/external
MDIO are different. Must be included for internal MDIO.
+For internal PHY device on internal mdio bus, a PHY node should be created.
+See the definition of the PHY node in booting-without-of.txt for an
+example of how to define a PHY (Internal PHY has no interrupt line).
+- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
+- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY,
+ PCS PHY addr must be '0'.
+
EXAMPLE
Example for FMan v2 external MDIO:
@@ -425,12 +443,29 @@
interrupts = <101 2 0 0>;
};
+Example for FMan v2 internal MDIO:
+
+mdio@e3120 {
+ compatible = "fsl,fman-mdio";
+ reg = <0xe3120 0xee0>;
+ fsl,fman-internal-mdio;
+
+ tbi1: tbi-phy@8 {
+ reg = <0x8>;
+ device_type = "tbi-phy";
+ };
+};
+
Example for FMan v3 internal MDIO:
mdio@f1000 {
compatible = "fsl,fman-memac-mdio";
reg = <0xf1000 0x1000>;
fsl,fman-internal-mdio;
+
+ pcsphy6: ethernet-phy@0 {
+ reg = <0x0>;
+ };
};
=============================================================================
@@ -568,6 +603,7 @@
cell-index = <0>;
reg = <0xe0000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>;
+ tbi-handle = <&tbi5>;
};
ethernet@e2000 {
@@ -575,6 +611,7 @@
cell-index = <1>;
reg = <0xe2000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x9 &fman1_tx_0x29>;
+ tbi-handle = <&tbi6>;
};
ethernet@e4000 {
@@ -582,6 +619,7 @@
cell-index = <2>;
reg = <0xe4000 0x1000>;
fsl,fman-ports = <&fman1_rx_0xa &fman1_tx_0x2a>;
+ tbi-handle = <&tbi7>;
};
ethernet@e6000 {
@@ -589,6 +627,7 @@
cell-index = <3>;
reg = <0xe6000 0x1000>;
fsl,fman-ports = <&fman1_rx_0xb &fman1_tx_0x2b>;
+ tbi-handle = <&tbi8>;
};
ethernet@e8000 {
@@ -596,6 +635,7 @@
cell-index = <4>;
reg = <0xf0000 0x1000>;
fsl,fman-ports = <&fman1_rx_0xc &fman1_tx_0x2c>;
+ tbi-handle = <&tbi9>;
ethernet@f0000 {
cell-index = <8>;
diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
new file mode 100644
index 0000000..e284e4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
@@ -0,0 +1,63 @@
+* Run Control and Power Management
+-------------------------------------------
+The RCPM performs all device-level tasks associated with device run control
+and power management.
+
+Required properites:
+ - reg : Offset and length of the register set of the RCPM block.
+ - fsl,#rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the
+ fsl,rcpm-wakeup property.
+ - compatible : Must contain a chip-specific RCPM block compatible string
+ and (if applicable) may contain a chassis-version RCPM compatible
+ string. Chip-specific strings are of the form "fsl,<chip>-rcpm",
+ such as:
+ * "fsl,p2041-rcpm"
+ * "fsl,p5020-rcpm"
+ * "fsl,t4240-rcpm"
+
+ Chassis-version strings are of the form "fsl,qoriq-rcpm-<version>",
+ such as:
+ * "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm
+ * "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm
+ * "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm
+
+All references to "1.0" and "2.0" refer to the QorIQ chassis version to
+which the chip complies.
+Chassis Version Example Chips
+--------------- -------------------------------
+1.0 p4080, p5020, p5040, p2041, p3041
+2.0 t4240, b4860, b4420
+2.1 t1040, ls1021
+
+Example:
+The RCPM node for T4240:
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
+ reg = <0xe2000 0x1000>;
+ fsl,#rcpm-wakeup-cells = <2>;
+ };
+
+* Freescale RCPM Wakeup Source Device Tree Bindings
+-------------------------------------------
+Required fsl,rcpm-wakeup property should be added to a device node if the device
+can be used as a wakeup source.
+
+ - fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR
+ register cells. The number of IPPDEXPCR register cells is defined in
+ "fsl,#rcpm-wakeup-cells" in the rcpm node. The first register cell is
+ the bit mask that should be set in IPPDEXPCR0, and the second register
+ cell is for IPPDEXPCR1, and so on.
+
+ Note: IPPDEXPCR(IP Powerdown Exception Control Register) provides a
+ mechanism for keeping certain blocks awake during STANDBY and MEM, in
+ order to use them as wake-up sources.
+
+Example:
+ lpuart0: serial@2950000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2950000 0x0 0x1000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sysclk>;
+ clock-names = "ipg";
+ fsl,rcpm-wakeup = <&rcpm 0x0 0x40000000>;
+ };
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 551ecf0..516d430 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2582,7 +2582,7 @@
nolapic_timer [X86-32,APIC] Do not use the local APIC timer.
noltlbs [PPC] Do not use large page/tlb entries for kernel
- lowmem mapping on PPC40x.
+ lowmem mapping on PPC40x and PPC8xx
nomca [IA-64] Disable machine check abort handling
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 5130fa1..b580ce0 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -408,7 +408,7 @@
config HOTPLUG_CPU
bool "Support for enabling/disabling CPUs"
depends on SMP && (PPC_PSERIES || \
- PPC_PMAC || PPC_POWERNV || (PPC_85xx && !PPC_E500MC))
+ PPC_PMAC || PPC_POWERNV || FSL_SOC_BOOKE)
---help---
Say Y here to be able to disable and re-enable individual
CPUs at runtime on SMP machines.
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index f4e49a4..709a22a 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -325,6 +325,16 @@
$(call merge_into_defconfig,corenet_basic_defconfig,\
85xx-64bit 85xx-smp altivec 85xx-hw fsl-emb-nonhw)
+PHONY += mpc86xx_defconfig
+mpc86xx_defconfig:
+ $(call merge_into_defconfig,mpc86xx_basic_defconfig,\
+ 86xx-hw fsl-emb-nonhw)
+
+PHONY += mpc86xx_smp_defconfig
+mpc86xx_smp_defconfig:
+ $(call merge_into_defconfig,mpc86xx_basic_defconfig,\
+ 86xx-smp 86xx-hw fsl-emb-nonhw)
+
define archhelp
@echo '* zImage - Build default images selected by kernel config'
@echo ' zImage.* - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
diff --git a/arch/powerpc/boot/dts/fsl/b4860qds.dts b/arch/powerpc/boot/dts/fsl/b4860qds.dts
index ba8c9be..a8bc419 100644
--- a/arch/powerpc/boot/dts/fsl/b4860qds.dts
+++ b/arch/powerpc/boot/dts/fsl/b4860qds.dts
@@ -1,7 +1,7 @@
/*
* B4860DS Device Tree Source
*
- * Copyright 2012 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -39,12 +39,69 @@
model = "fsl,B4860QDS";
compatible = "fsl,B4860QDS";
+ aliases {
+ phy_sgmii_1e = &phy_sgmii_1e;
+ phy_sgmii_1f = &phy_sgmii_1f;
+ phy_xaui_slot1 = &phy_xaui_slot1;
+ phy_xaui_slot2 = &phy_xaui_slot2;
+ };
+
ifc: localbus@ffe124000 {
board-control@3,0 {
compatible = "fsl,b4860qds-fpga", "fsl,fpga-qixis";
};
};
+ soc@ffe000000 {
+ fman@400000 {
+ ethernet@e8000 {
+ phy-handle = <&phy_sgmii_1e>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@ea000 {
+ phy-handle = <&phy_sgmii_1f>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@f0000 {
+ phy-handle = <&phy_xaui_slot1>;
+ phy-connection-type = "xgmii";
+ };
+
+ ethernet@f2000 {
+ phy-handle = <&phy_xaui_slot2>;
+ phy-connection-type = "xgmii";
+ };
+
+ mdio@fc000 {
+ phy_sgmii_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ status = "disabled";
+ };
+
+ phy_sgmii_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ status = "disabled";
+ };
+ };
+
+ mdio@fd000 {
+ phy_xaui_slot1: xaui-phy@slot1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x7>;
+ status = "disabled";
+ };
+
+ phy_xaui_slot2: xaui-phy@slot2 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x6>;
+ status = "disabled";
+ };
+ };
+ };
+ };
+
rio: rapidio@ffe0c0000 {
reg = <0xf 0xfe0c0000 0 0x11000>;
@@ -55,7 +112,6 @@
ranges = <0 0 0xc 0x30000000 0 0x10000000>;
};
};
-
};
/include/ "b4860si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/b4qds.dtsi b/arch/powerpc/boot/dts/fsl/b4qds.dtsi
index 6455774..3785ef8 100644
--- a/arch/powerpc/boot/dts/fsl/b4qds.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4qds.dtsi
@@ -1,7 +1,7 @@
/*
* B4420DS Device Tree Source
*
- * Copyright 2012 - 2014 Freescale Semiconductor, Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -39,6 +39,13 @@
#size-cells = <2>;
interrupt-parent = <&mpic>;
+ aliases {
+ phy_sgmii_10 = &phy_sgmii_10;
+ phy_sgmii_11 = &phy_sgmii_11;
+ phy_sgmii_1c = &phy_sgmii_1c;
+ phy_sgmii_1d = &phy_sgmii_1d;
+ };
+
ifc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x2000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
@@ -135,7 +142,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "sst,sst25wf040";
+ compatible = "sst,sst25wf040", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
};
@@ -210,6 +217,47 @@
phy_type = "ulpi";
};
+ fman@400000 {
+ ethernet@e0000 {
+ phy-handle = <&phy_sgmii_10>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&phy_sgmii_11>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&phy_sgmii_1c>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&phy_sgmii_1d>;
+ phy-connection-type = "sgmii";
+ };
+
+ mdio@fc000 {
+ phy_sgmii_10: ethernet-phy@10 {
+ reg = <0x10>;
+ };
+
+ phy_sgmii_11: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+
+ phy_sgmii_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ status = "disabled";
+ };
+
+ phy_sgmii_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ status = "disabled";
+ };
+ };
+ };
};
pci0: pcie@ffe200000 {
@@ -226,7 +274,6 @@
0 0x00010000>;
};
};
-
};
/include/ "b4si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi
index f4d96d2..53f8b95 100644
--- a/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi
@@ -53,7 +53,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi
index 7a13bf2..fead484 100644
--- a/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi
+++ b/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi
@@ -55,7 +55,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
};
diff --git a/arch/powerpc/boot/dts/fsl/c293pcie.dts b/arch/powerpc/boot/dts/fsl/c293pcie.dts
index 53ab4db..6670978 100644
--- a/arch/powerpc/boot/dts/fsl/c293pcie.dts
+++ b/arch/powerpc/boot/dts/fsl/c293pcie.dts
@@ -167,7 +167,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
diff --git a/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts
new file mode 100644
index 0000000..0424fc2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts
@@ -0,0 +1,216 @@
+/*
+ * GE PPC9A Device Tree Source
+ *
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Based on: SBS CM6 Device Tree Source
+ * Copyright 2007 SBS Technologies GmbH & Co. KG
+ * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+/*
+ * Compiled with dtc -I dts -O dtb -o gef_ppc9a.dtb gef_ppc9a.dts
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+ model = "GEF_PPC9A";
+ compatible = "gef,ppc9a";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x40000000>; // set by uboot
+ };
+
+ lbc: localbus@fef05000 {
+ reg = <0xfef05000 0x1000>;
+
+ ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
+ 1 0 0xe8000000 0x08000000 // Paged Flash 0
+ 2 0 0xe0000000 0x08000000 // Paged Flash 1
+ 3 0 0xfc100000 0x00020000 // NVRAM
+ 4 0 0xfc000000 0x00008000 // FPGA
+ 5 0 0xfc008000 0x00008000 // AFIX FPGA
+ 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit)
+ 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit)
+
+ /* flash@0,0 is a mirror of part of the memory in flash@1,0
+ flash@0,0 {
+ compatible = "gef,ppc9a-firmware-mirror", "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <4>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "firmware";
+ reg = <0x0 0x1000000>;
+ read-only;
+ };
+ };
+ */
+
+ flash@1,0 {
+ compatible = "gef,ppc9a-paged-flash", "cfi-flash";
+ reg = <0x1 0x0 0x8000000>;
+ bank-width = <4>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "user";
+ reg = <0x0 0x7800000>;
+ };
+ partition@7800000 {
+ label = "firmware";
+ reg = <0x7800000 0x800000>;
+ read-only;
+ };
+ };
+
+ nvram@3,0 {
+ device_type = "nvram";
+ compatible = "simtek,stk14ca8";
+ reg = <0x3 0x0 0x20000>;
+ };
+
+ fpga@4,0 {
+ compatible = "gef,ppc9a-fpga-regs";
+ reg = <0x4 0x0 0x40>;
+ };
+
+ wdt@4,2000 {
+ compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
+ "gef,fpga-wdt";
+ reg = <0x4 0x2000 0x8>;
+ interrupts = <0x1a 0x4>;
+ interrupt-parent = <&gef_pic>;
+ };
+ /* Second watchdog available, driver currently supports one.
+ wdt@4,2010 {
+ compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
+ "gef,fpga-wdt";
+ reg = <0x4 0x2010 0x8>;
+ interrupts = <0x1b 0x4>;
+ interrupt-parent = <&gef_pic>;
+ };
+ */
+ gef_pic: pic@4,4000 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "gef,ppc9a-fpga-pic", "gef,fpga-pic-1.00";
+ reg = <0x4 0x4000 0x20>;
+ interrupts = <0x8 0x9 0 0>;
+
+ };
+ gef_gpio: gpio@7,14000 {
+ #gpio-cells = <2>;
+ compatible = "gef,ppc9a-gpio", "gef,sbc610-gpio";
+ reg = <0x7 0x14000 0x24>;
+ gpio-controller;
+ };
+ };
+
+ soc: soc@fef00000 {
+ ranges = <0x0 0xfef00000 0x00100000>;
+
+ i2c@3000 {
+ hwmon@48 {
+ compatible = "national,lm92";
+ reg = <0x48>;
+ };
+
+ hwmon@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+
+ rtc@51 {
+ compatible = "epson,rx8581";
+ reg = <0x00000051>;
+ };
+
+ eti@6b {
+ compatible = "dallas,ds1682";
+ reg = <0x6b>;
+ };
+ };
+
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "gmii";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x9 0x4>;
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x8 0x4>;
+ reg = <3>;
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet1: ethernet@26000 {
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "gmii";
+ };
+
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@25000 {
+ status = "disabled";
+ };
+
+ mdio@25520 {
+ status = "disabled";
+ };
+
+ enet3: ethernet@27000 {
+ status = "disabled";
+ };
+
+ mdio@27520 {
+ status = "disabled";
+ };
+ };
+
+ pci0: pcie@fef08000 {
+ reg = <0xfef08000 0x1000>;
+ ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
+ 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
+
+ pcie@0 {
+ ranges = <0x02000000 0x0 0x80000000
+ 0x02000000 0x0 0x80000000
+ 0x0 0x40000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00400000>;
+ };
+ };
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc310.dts b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts
new file mode 100644
index 0000000..84b3d38
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts
@@ -0,0 +1,260 @@
+/*
+ * GE SBC310 Device Tree Source
+ *
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Based on: SBS CM6 Device Tree Source
+ * Copyright 2007 SBS Technologies GmbH & Co. KG
+ * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+/*
+ * Compiled with dtc -I dts -O dtb -o gef_sbc310.dtb gef_sbc310.dts
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+ model = "GEF_SBC310";
+ compatible = "gef,sbc310";
+
+ aliases {
+ pci1 = &pci1;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x40000000>; // set by uboot
+ };
+
+ lbc: localbus@fef05000 {
+ reg = <0xfef05000 0x1000>;
+
+ ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
+ 1 0 0xe0000000 0x08000000 // Paged Flash 0
+ 2 0 0xe8000000 0x08000000 // Paged Flash 1
+ 3 0 0xfc100000 0x00020000 // NVRAM
+ 4 0 0xfc000000 0x00010000>; // FPGA
+
+ /* flash@0,0 is a mirror of part of the memory in flash@1,0
+ flash@0,0 {
+ compatible = "gef,sbc310-firmware-mirror", "cfi-flash";
+ reg = <0x0 0x0 0x01000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "firmware";
+ reg = <0x0 0x01000000>;
+ read-only;
+ };
+ };
+ */
+
+ flash@1,0 {
+ compatible = "gef,sbc310-paged-flash", "cfi-flash";
+ reg = <0x1 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "user";
+ reg = <0x0 0x7800000>;
+ };
+ partition@7800000 {
+ label = "firmware";
+ reg = <0x7800000 0x800000>;
+ read-only;
+ };
+ };
+
+ nvram@3,0 {
+ device_type = "nvram";
+ compatible = "simtek,stk14ca8";
+ reg = <0x3 0x0 0x20000>;
+ };
+
+ fpga@4,0 {
+ compatible = "gef,fpga-regs";
+ reg = <0x4 0x0 0x40>;
+ };
+
+ wdt@4,2000 {
+ compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
+ "gef,fpga-wdt";
+ reg = <0x4 0x2000 0x8>;
+ interrupts = <0x1a 0x4>;
+ interrupt-parent = <&gef_pic>;
+ };
+/*
+ wdt@4,2010 {
+ compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
+ "gef,fpga-wdt";
+ reg = <0x4 0x2010 0x8>;
+ interrupts = <0x1b 0x4>;
+ interrupt-parent = <&gef_pic>;
+ };
+*/
+ gef_pic: pic@4,4000 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic";
+ reg = <0x4 0x4000 0x20>;
+ interrupts = <0x8 0x9 0 0>;
+
+ };
+ gef_gpio: gpio@4,8000 {
+ #gpio-cells = <2>;
+ compatible = "gef,sbc310-gpio";
+ reg = <0x4 0x8000 0x24>;
+ gpio-controller;
+ };
+ };
+
+ soc: soc@fef00000 {
+ ranges = <0x0 0xfef00000 0x00100000>;
+
+ i2c@3000 {
+ rtc@51 {
+ compatible = "epson,rx8581";
+ reg = <0x00000051>;
+ };
+ };
+
+ i2c@3100 {
+ hwmon@48 {
+ compatible = "national,lm92";
+ reg = <0x48>;
+ };
+
+ hwmon@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+
+ eti@6b {
+ compatible = "dallas,ds1682";
+ reg = <0x6b>;
+ };
+ };
+
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "gmii";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x9 0x4>;
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x8 0x4>;
+ reg = <3>;
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet1: ethernet@26000 {
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "gmii";
+ };
+
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@25000 {
+ status = "disabled";
+ };
+
+ mdio@25520 {
+ status = "disabled";
+ };
+
+ enet3: ethernet@27000 {
+ status = "disabled";
+ };
+
+ mdio@27520 {
+ status = "disabled";
+ };
+ };
+
+ pci0: pcie@fef08000 {
+ reg = <0xfef08000 0x1000>;
+ ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
+ 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0000 0x0 0x0 0x1 &mpic 0x0 0x2
+ 0x0000 0x0 0x0 0x2 &mpic 0x1 0x2
+ 0x0000 0x0 0x0 0x3 &mpic 0x2 0x2
+ 0x0000 0x0 0x0 0x4 &mpic 0x3 0x2
+ >;
+
+ pcie@0 {
+ ranges = <0x02000000 0x0 0x80000000
+ 0x02000000 0x0 0x80000000
+ 0x0 0x40000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00400000>;
+ };
+ };
+
+ pci1: pcie@fef09000 {
+ compatible = "fsl,mpc8641-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xfef09000 0x1000>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>;
+ clock-frequency = <100000000>;
+ interrupts = <0x19 0x2 0 0>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0000 0x0 0x0 0x1 &mpic 0x4 0x2
+ 0x0000 0x0 0x0 0x2 &mpic 0x5 0x2
+ 0x0000 0x0 0x0 0x3 &mpic 0x6 0x2
+ 0x0000 0x0 0x0 0x4 &mpic 0x7 0x2
+ >;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0xc0000000
+ 0x02000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00400000>;
+ };
+ };
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc610.dts b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts
new file mode 100644
index 0000000..974446a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts
@@ -0,0 +1,214 @@
+/*
+ * GE SBC610 Device Tree Source
+ *
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Based on: SBS CM6 Device Tree Source
+ * Copyright 2007 SBS Technologies GmbH & Co. KG
+ * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+/*
+ * Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+ model = "GEF_SBC610";
+ compatible = "gef,sbc610";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x40000000>; // set by uboot
+ };
+
+ lbc: localbus@fef05000 {
+ reg = <0xfef05000 0x1000>;
+
+ ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
+ 1 0 0xe8000000 0x08000000 // Paged Flash 0
+ 2 0 0xe0000000 0x08000000 // Paged Flash 1
+ 3 0 0xfc100000 0x00020000 // NVRAM
+ 4 0 0xfc000000 0x00008000 // FPGA
+ 5 0 0xfc008000 0x00008000 // AFIX FPGA
+ 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit)
+ 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit)
+
+ /* flash@0,0 is a mirror of part of the memory in flash@1,0
+ flash@0,0 {
+ compatible = "gef,sbc610-firmware-mirror", "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <4>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "firmware";
+ reg = <0x0 0x1000000>;
+ read-only;
+ };
+ };
+ */
+
+ flash@1,0 {
+ compatible = "gef,sbc610-paged-flash", "cfi-flash";
+ reg = <0x1 0x0 0x8000000>;
+ bank-width = <4>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "user";
+ reg = <0x0 0x7800000>;
+ };
+ partition@7800000 {
+ label = "firmware";
+ reg = <0x7800000 0x800000>;
+ read-only;
+ };
+ };
+
+ nvram@3,0 {
+ device_type = "nvram";
+ compatible = "simtek,stk14ca8";
+ reg = <0x3 0x0 0x20000>;
+ };
+
+ fpga@4,0 {
+ compatible = "gef,fpga-regs";
+ reg = <0x4 0x0 0x40>;
+ };
+
+ wdt@4,2000 {
+ compatible = "gef,fpga-wdt";
+ reg = <0x4 0x2000 0x8>;
+ interrupts = <0x1a 0x4>;
+ interrupt-parent = <&gef_pic>;
+ };
+ /* Second watchdog available, driver currently supports one.
+ wdt@4,2010 {
+ compatible = "gef,fpga-wdt";
+ reg = <0x4 0x2010 0x8>;
+ interrupts = <0x1b 0x4>;
+ interrupt-parent = <&gef_pic>;
+ };
+ */
+ gef_pic: pic@4,4000 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "gef,fpga-pic";
+ reg = <0x4 0x4000 0x20>;
+ interrupts = <0x8 0x9 0 0>;
+
+ };
+ gef_gpio: gpio@7,14000 {
+ #gpio-cells = <2>;
+ compatible = "gef,sbc610-gpio";
+ reg = <0x7 0x14000 0x24>;
+ gpio-controller;
+ };
+ };
+
+ soc: soc@fef00000 {
+ ranges = <0x0 0xfef00000 0x00100000>;
+
+ i2c@3000 {
+ hwmon@48 {
+ compatible = "national,lm92";
+ reg = <0x48>;
+ };
+
+ hwmon@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+
+ rtc@51 {
+ compatible = "epson,rx8581";
+ reg = <0x00000051>;
+ };
+
+ eti@6b {
+ compatible = "dallas,ds1682";
+ reg = <0x6b>;
+ };
+ };
+
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "gmii";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x9 0x4>;
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x8 0x4>;
+ reg = <3>;
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet1: ethernet@26000 {
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "gmii";
+ };
+
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@25000 {
+ status = "disabled";
+ };
+
+ mdio@25520 {
+ status = "disabled";
+ };
+
+ enet3: ethernet@27000 {
+ status = "disabled";
+ };
+
+ mdio@27520 {
+ status = "disabled";
+ };
+ };
+
+ pci0: pcie@fef08000 {
+ reg = <0xfef08000 0x1000>;
+ ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
+ 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
+
+ pcie@0 {
+ ranges = <0x02000000 0x0 0x80000000
+ 0x02000000 0x0 0x80000000
+ 0x0 0x40000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00400000>;
+ };
+ };
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/kmcoge4.dts b/arch/powerpc/boot/dts/fsl/kmcoge4.dts
index 6858ec9..2d4b64f 100644
--- a/arch/powerpc/boot/dts/fsl/kmcoge4.dts
+++ b/arch/powerpc/boot/dts/fsl/kmcoge4.dts
@@ -63,7 +63,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25fl256s1";
+ compatible = "spansion,s25fl256s1", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>; /* input clock */
};
@@ -77,7 +77,7 @@
flash@2 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,m25p32";
+ compatible = "micron,m25p32", "jedec,spi-nor";
reg = <2>;
spi-max-frequency = <15000000>;
};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi
index 937ad7e..a925fe4 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi
+++ b/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi
@@ -142,7 +142,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partition@u-boot {
@@ -166,17 +166,17 @@
};
};
flash@1 {
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <1>;
spi-max-frequency = <40000000>;
};
flash@2 {
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <2>;
spi-max-frequency = <40000000>;
};
flash@3 {
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <3>;
spi-max-frequency = <40000000>;
};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts
new file mode 100644
index 0000000..554001f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts
@@ -0,0 +1,420 @@
+/*
+ * MPC8641 HPCN Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+ model = "MPC8641HPCN";
+ compatible = "fsl,mpc8641hpcn";
+
+ aliases {
+ pci1 = &pci1;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000>; // 1G at 0x0
+ };
+
+ lbc: localbus@ffe05000 {
+ reg = <0xffe05000 0x1000>;
+
+ ranges = <0 0 0xef800000 0x00800000
+ 2 0 0xffdf8000 0x00008000
+ 3 0 0xffdf0000 0x00008000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x00800000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x00300000>;
+ };
+ partition@300000 {
+ label = "firmware b";
+ reg = <0x00300000 0x00100000>;
+ read-only;
+ };
+ partition@400000 {
+ label = "fs";
+ reg = <0x00400000 0x00300000>;
+ };
+ partition@700000 {
+ label = "firmware a";
+ reg = <0x00700000 0x00100000>;
+ read-only;
+ };
+ };
+ };
+
+ soc: soc8641@ffe00000 {
+ ranges = <0x00000000 0xffe00000 0x00100000>;
+
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <10 1 0 0>;
+ reg = <0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <10 1 0 0>;
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <10 1 0 0>;
+ reg = <2>;
+ };
+ phy3: ethernet-phy@3 {
+ interrupts = <10 1 0 0>;
+ reg = <3>;
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet1: ethernet@25000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@26000 {
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet3: ethernet@27000 {
+ tbi-handle = <&tbi3>;
+ phy-handle = <&phy3>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@27520 {
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ rmu: rmu@d3000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,srio-rmu";
+ reg = <0xd3000 0x500>;
+ ranges = <0x0 0xd3000 0x500>;
+
+ message-unit@0 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x0 0x100>;
+ interrupts = <
+ 53 2 0 0 /* msg1_tx_irq */
+ 54 2 0 0>;/* msg1_rx_irq */
+ };
+ message-unit@100 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x100 0x100>;
+ interrupts = <
+ 55 2 0 0 /* msg2_tx_irq */
+ 56 2 0 0>;/* msg2_rx_irq */
+ };
+ doorbell-unit@400 {
+ compatible = "fsl,srio-dbell-unit";
+ reg = <0x400 0x80>;
+ interrupts = <
+ 49 2 0 0 /* bell_outb_irq */
+ 50 2 0 0>;/* bell_inb_irq */
+ };
+ port-write-unit@4e0 {
+ compatible = "fsl,srio-port-write-unit";
+ reg = <0x4e0 0x20>;
+ interrupts = <48 2 0 0>;
+ };
+ };
+ };
+
+ pci0: pcie@ffe08000 {
+ reg = <0xffe08000 0x1000>;
+ ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x11 func 0 - PCI slot 1 */
+ 0x8800 0 0 1 &mpic 2 1
+ 0x8800 0 0 2 &mpic 3 1
+ 0x8800 0 0 3 &mpic 4 1
+ 0x8800 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 1 - PCI slot 1 */
+ 0x8900 0 0 1 &mpic 2 1
+ 0x8900 0 0 2 &mpic 3 1
+ 0x8900 0 0 3 &mpic 4 1
+ 0x8900 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 2 - PCI slot 1 */
+ 0x8a00 0 0 1 &mpic 2 1
+ 0x8a00 0 0 2 &mpic 3 1
+ 0x8a00 0 0 3 &mpic 4 1
+ 0x8a00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 3 - PCI slot 1 */
+ 0x8b00 0 0 1 &mpic 2 1
+ 0x8b00 0 0 2 &mpic 3 1
+ 0x8b00 0 0 3 &mpic 4 1
+ 0x8b00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 4 - PCI slot 1 */
+ 0x8c00 0 0 1 &mpic 2 1
+ 0x8c00 0 0 2 &mpic 3 1
+ 0x8c00 0 0 3 &mpic 4 1
+ 0x8c00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 5 - PCI slot 1 */
+ 0x8d00 0 0 1 &mpic 2 1
+ 0x8d00 0 0 2 &mpic 3 1
+ 0x8d00 0 0 3 &mpic 4 1
+ 0x8d00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 6 - PCI slot 1 */
+ 0x8e00 0 0 1 &mpic 2 1
+ 0x8e00 0 0 2 &mpic 3 1
+ 0x8e00 0 0 3 &mpic 4 1
+ 0x8e00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 7 - PCI slot 1 */
+ 0x8f00 0 0 1 &mpic 2 1
+ 0x8f00 0 0 2 &mpic 3 1
+ 0x8f00 0 0 3 &mpic 4 1
+ 0x8f00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x12 func 0 - PCI slot 2 */
+ 0x9000 0 0 1 &mpic 3 1
+ 0x9000 0 0 2 &mpic 4 1
+ 0x9000 0 0 3 &mpic 1 1
+ 0x9000 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 1 - PCI slot 2 */
+ 0x9100 0 0 1 &mpic 3 1
+ 0x9100 0 0 2 &mpic 4 1
+ 0x9100 0 0 3 &mpic 1 1
+ 0x9100 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 2 - PCI slot 2 */
+ 0x9200 0 0 1 &mpic 3 1
+ 0x9200 0 0 2 &mpic 4 1
+ 0x9200 0 0 3 &mpic 1 1
+ 0x9200 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 3 - PCI slot 2 */
+ 0x9300 0 0 1 &mpic 3 1
+ 0x9300 0 0 2 &mpic 4 1
+ 0x9300 0 0 3 &mpic 1 1
+ 0x9300 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 4 - PCI slot 2 */
+ 0x9400 0 0 1 &mpic 3 1
+ 0x9400 0 0 2 &mpic 4 1
+ 0x9400 0 0 3 &mpic 1 1
+ 0x9400 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 5 - PCI slot 2 */
+ 0x9500 0 0 1 &mpic 3 1
+ 0x9500 0 0 2 &mpic 4 1
+ 0x9500 0 0 3 &mpic 1 1
+ 0x9500 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 6 - PCI slot 2 */
+ 0x9600 0 0 1 &mpic 3 1
+ 0x9600 0 0 2 &mpic 4 1
+ 0x9600 0 0 3 &mpic 1 1
+ 0x9600 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 7 - PCI slot 2 */
+ 0x9700 0 0 1 &mpic 3 1
+ 0x9700 0 0 2 &mpic 4 1
+ 0x9700 0 0 3 &mpic 1 1
+ 0x9700 0 0 4 &mpic 2 1
+
+ // IDSEL 0x1c USB
+ 0xe000 0 0 1 &i8259 12 2
+ 0xe100 0 0 2 &i8259 9 2
+ 0xe200 0 0 3 &i8259 10 2
+ 0xe300 0 0 4 &i8259 11 2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0 0 1 &i8259 6 2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0 0 1 &i8259 7 2
+ 0xf100 0 0 1 &i8259 7 2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0 0 1 &i8259 14 2
+ 0xf900 0 0 1 &i8259 5 2
+ >;
+
+ pcie@0 {
+ ranges = <0x02000000 0x0 0x80000000
+ 0x02000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00010000>;
+ uli1575@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x02000000 0x0 0x80000000
+ 0x02000000 0x0 0x80000000
+ 0x0 0x20000000
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00010000>;
+ isa@1e {
+ device_type = "isa";
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0 0 0 0>;
+ ranges = <1 0 0x01000000 0 0
+ 0x00001000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <1 0x20 2
+ 1 0xa0 2
+ 1 0x4d0 2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <9 2 0 0>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <1 0x60 1 1 0x64 1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent = <&i8259>;
+
+ keyboard@0 {
+ reg = <0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible =
+ "pnpPNP,b00";
+ reg = <1 0x70 2>;
+ };
+
+ gpio@400 {
+ reg = <1 0x400 0x80>;
+ };
+ };
+ };
+ };
+
+ };
+
+ pci1: pcie@ffe09000 {
+ compatible = "fsl,mpc8641-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xffe09000 0x1000>;
+ bus-range = <0 0xff>;
+ ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>;
+ clock-frequency = <100000000>;
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0x0000 0 0 1 &mpic 4 1
+ 0x0000 0 0 2 &mpic 5 1
+ 0x0000 0 0 3 &mpic 6 1
+ 0x0000 0 0 4 &mpic 7 1
+ >;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0xa0000000
+ 0x02000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00010000>;
+ };
+ };
+/*
+ * Only one of Rapid IO or PCI can be present due to HW limitations and
+ * due to the fact that the 2 now share address space in the new memory
+ * map. The most likely case is that we have PCI, so comment out the
+ * rapidio node. Leave it here for reference.
+
+ rapidio@ffec0000 {
+ reg = <0xffec0000 0x11000>;
+ compatible = "fsl,srio";
+ interrupts = <48 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ fsl,srio-rmu-handle = <&rmu>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ ranges = <0 0 0x80000000 0 0x20000000>;
+ };
+ };
+*/
+
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts
new file mode 100644
index 0000000..fec5867
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts
@@ -0,0 +1,363 @@
+/*
+ * MPC8641 HPCN Device Tree Source
+ *
+ * Copyright 2008-2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+ model = "MPC8641HPCN";
+ compatible = "fsl,mpc8641hpcn";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ pci1 = &pci1;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x00000000 0x0 0x40000000>; // 1G at 0x0
+ };
+
+ lbc: localbus@fffe05000 {
+ reg = <0x0f 0xffe05000 0x0 0x1000>;
+
+ ranges = <0 0 0xf 0xef800000 0x00800000
+ 2 0 0xf 0xffdf8000 0x00008000
+ 3 0 0xf 0xffdf0000 0x00008000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x00800000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x00300000>;
+ };
+ partition@300000 {
+ label = "firmware b";
+ reg = <0x00300000 0x00100000>;
+ read-only;
+ };
+ partition@400000 {
+ label = "fs";
+ reg = <0x00400000 0x00300000>;
+ };
+ partition@700000 {
+ label = "firmware a";
+ reg = <0x00700000 0x00100000>;
+ read-only;
+ };
+ };
+ };
+
+ soc: soc8641@fffe00000 {
+ ranges = <0x00000000 0x0f 0xffe00000 0x00100000>;
+
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <10 1 0 0>;
+ reg = <0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <10 1 0 0>;
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <10 1 0 0>;
+ reg = <2>;
+ };
+ phy3: ethernet-phy@3 {
+ interrupts = <10 1 0 0>;
+ reg = <3>;
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet1: ethernet@25000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@26000 {
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet3: ethernet@27000 {
+ tbi-handle = <&tbi3>;
+ phy-handle = <&phy3>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@27520 {
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ pci0: pcie@fffe08000 {
+ reg = <0x0f 0xffe08000 0x0 0x1000>;
+ ranges = <0x02000000 0x0 0xe0000000 0x0c 0x00000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0x0f 0xffc00000 0x0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x11 func 0 - PCI slot 1 */
+ 0x8800 0 0 1 &mpic 2 1
+ 0x8800 0 0 2 &mpic 3 1
+ 0x8800 0 0 3 &mpic 4 1
+ 0x8800 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 1 - PCI slot 1 */
+ 0x8900 0 0 1 &mpic 2 1
+ 0x8900 0 0 2 &mpic 3 1
+ 0x8900 0 0 3 &mpic 4 1
+ 0x8900 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 2 - PCI slot 1 */
+ 0x8a00 0 0 1 &mpic 2 1
+ 0x8a00 0 0 2 &mpic 3 1
+ 0x8a00 0 0 3 &mpic 4 1
+ 0x8a00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 3 - PCI slot 1 */
+ 0x8b00 0 0 1 &mpic 2 1
+ 0x8b00 0 0 2 &mpic 3 1
+ 0x8b00 0 0 3 &mpic 4 1
+ 0x8b00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 4 - PCI slot 1 */
+ 0x8c00 0 0 1 &mpic 2 1
+ 0x8c00 0 0 2 &mpic 3 1
+ 0x8c00 0 0 3 &mpic 4 1
+ 0x8c00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 5 - PCI slot 1 */
+ 0x8d00 0 0 1 &mpic 2 1
+ 0x8d00 0 0 2 &mpic 3 1
+ 0x8d00 0 0 3 &mpic 4 1
+ 0x8d00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 6 - PCI slot 1 */
+ 0x8e00 0 0 1 &mpic 2 1
+ 0x8e00 0 0 2 &mpic 3 1
+ 0x8e00 0 0 3 &mpic 4 1
+ 0x8e00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 7 - PCI slot 1 */
+ 0x8f00 0 0 1 &mpic 2 1
+ 0x8f00 0 0 2 &mpic 3 1
+ 0x8f00 0 0 3 &mpic 4 1
+ 0x8f00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x12 func 0 - PCI slot 2 */
+ 0x9000 0 0 1 &mpic 3 1
+ 0x9000 0 0 2 &mpic 4 1
+ 0x9000 0 0 3 &mpic 1 1
+ 0x9000 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 1 - PCI slot 2 */
+ 0x9100 0 0 1 &mpic 3 1
+ 0x9100 0 0 2 &mpic 4 1
+ 0x9100 0 0 3 &mpic 1 1
+ 0x9100 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 2 - PCI slot 2 */
+ 0x9200 0 0 1 &mpic 3 1
+ 0x9200 0 0 2 &mpic 4 1
+ 0x9200 0 0 3 &mpic 1 1
+ 0x9200 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 3 - PCI slot 2 */
+ 0x9300 0 0 1 &mpic 3 1
+ 0x9300 0 0 2 &mpic 4 1
+ 0x9300 0 0 3 &mpic 1 1
+ 0x9300 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 4 - PCI slot 2 */
+ 0x9400 0 0 1 &mpic 3 1
+ 0x9400 0 0 2 &mpic 4 1
+ 0x9400 0 0 3 &mpic 1 1
+ 0x9400 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 5 - PCI slot 2 */
+ 0x9500 0 0 1 &mpic 3 1
+ 0x9500 0 0 2 &mpic 4 1
+ 0x9500 0 0 3 &mpic 1 1
+ 0x9500 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 6 - PCI slot 2 */
+ 0x9600 0 0 1 &mpic 3 1
+ 0x9600 0 0 2 &mpic 4 1
+ 0x9600 0 0 3 &mpic 1 1
+ 0x9600 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 7 - PCI slot 2 */
+ 0x9700 0 0 1 &mpic 3 1
+ 0x9700 0 0 2 &mpic 4 1
+ 0x9700 0 0 3 &mpic 1 1
+ 0x9700 0 0 4 &mpic 2 1
+
+ // IDSEL 0x1c USB
+ 0xe000 0 0 1 &i8259 12 2
+ 0xe100 0 0 2 &i8259 9 2
+ 0xe200 0 0 3 &i8259 10 2
+ 0xe300 0 0 4 &i8259 11 2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0 0 1 &i8259 6 2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0 0 1 &i8259 7 2
+ 0xf100 0 0 1 &i8259 7 2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0 0 1 &i8259 14 2
+ 0xf900 0 0 1 &i8259 5 2
+ >;
+
+ pcie@0 {
+ ranges = <0x02000000 0x0 0xe0000000
+ 0x02000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00010000>;
+ uli1575@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x02000000 0x0 0xe0000000
+ 0x02000000 0x0 0xe0000000
+ 0x0 0x20000000
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00010000>;
+ isa@1e {
+ device_type = "isa";
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0 0 0 0>;
+ ranges = <1 0 0x01000000 0 0
+ 0x00001000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <1 0x20 2
+ 1 0xa0 2
+ 1 0x4d0 2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <9 2 0 0>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <1 0x60 1 1 0x64 1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent = <&i8259>;
+
+ keyboard@0 {
+ reg = <0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible =
+ "pnpPNP,b00";
+ reg = <1 0x70 2>;
+ };
+
+ gpio@400 {
+ reg = <1 0x400 0x80>;
+ };
+ };
+ };
+ };
+
+ };
+
+ pci1: pcie@fffe09000 {
+ compatible = "fsl,mpc8641-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0x0f 0xffe09000 0x0 0x1000>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x02000000 0x0 0xe0000000 0x0c 0x20000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0x0f 0xffc10000 0x0 0x00010000>;
+ clock-frequency = <100000000>;
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0x0000 0 0 1 &mpic 4 1
+ 0x0000 0 0 2 &mpic 5 1
+ 0x0000 0 0 3 &mpic 6 1
+ 0x0000 0 0 4 &mpic 7 1
+ >;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0xe0000000
+ 0x02000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00010000>;
+ };
+ };
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi
new file mode 100644
index 0000000..70889d8
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi
@@ -0,0 +1,120 @@
+/*
+ * MPC8641 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8641-localbus", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8641-soc", "simple-bus";
+ bus-frequency = <0>;
+
+ mcm-law@0 {
+ compatible = "fsl,mcm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ mcm@1000 {
+ compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+ serial@4600 {
+ interrupts = <28 2 0 0>;
+ };
+/include/ "pq3-dma-0.dtsi"
+ dma@21300 {
+ compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+ };
+ dma-channel@0 {
+ compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel";
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel";
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel";
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel";
+ };
+
+/include/ "pq3-etsec1-0.dtsi"
+ ethernet@24000 {
+ model = "TSEC";
+ };
+/include/ "pq3-etsec1-1.dtsi"
+ ethernet@25000 {
+ model = "TSEC";
+ };
+/include/ "pq3-etsec1-2.dtsi"
+ ethernet@26000 {
+ model = "TSEC";
+ };
+/include/ "pq3-etsec1-3.dtsi"
+ ethernet@27000 {
+ model = "TSEC";
+ };
+
+/include/ "qoriq-mpic.dtsi"
+ msi@41600 {
+ compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+ };
+ msi@41800 {
+ compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+ };
+ msi@41a00 {
+ compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8641-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
+
+&pci0 {
+ compatible = "fsl,mpc8641-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <100000000>;
+ interrupts = <24 2 0 0>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+
+ interrupt-map = <
+ 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ >;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi
new file mode 100644
index 0000000..9e03328
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi
@@ -0,0 +1,58 @@
+/*
+ * MPC8641 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8641@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-size = <32768>;
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ };
+
+ PowerPC,8641@1 {
+ device_type = "cpu";
+ reg = <1>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-size = <32768>;
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mvme2500.dts b/arch/powerpc/boot/dts/fsl/mvme2500.dts
index c7bc1a0..69559e97 100644
--- a/arch/powerpc/boot/dts/fsl/mvme2500.dts
+++ b/arch/powerpc/boot/dts/fsl/mvme2500.dts
@@ -70,12 +70,12 @@
fsl,espi-num-chipselects = <2>;
flash@0 {
- compatible = "atmel,at25df641";
+ compatible = "atmel,at25df641", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
};
flash@1 {
- compatible = "atmel,at25df641";
+ compatible = "atmel,at25df641", "jedec,spi-nor";
reg = <1>;
spi-max-frequency = <10000000>;
};
diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
index 14b6295..a8e4ba0 100644
--- a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
@@ -110,7 +110,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi
index c952cd3..25f81ee 100644
--- a/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi
@@ -151,7 +151,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts
index 740553c..f2dc6c0 100644
--- a/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts
@@ -155,7 +155,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <0>;
/* input clock */
spi-max-frequency = <40000000>;
diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi
index 1fb7e0e..703142e 100644
--- a/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi
@@ -148,7 +148,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
diff --git a/arch/powerpc/boot/dts/fsl/p1021mds.dts b/arch/powerpc/boot/dts/fsl/p1021mds.dts
index 27fdfd7..291454c 100644
--- a/arch/powerpc/boot/dts/fsl/p1021mds.dts
+++ b/arch/powerpc/boot/dts/fsl/p1021mds.dts
@@ -123,7 +123,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
diff --git a/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi
index e8a0f95..18f9b31 100644
--- a/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi
@@ -150,7 +150,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
diff --git a/arch/powerpc/boot/dts/fsl/p1022ds.dtsi b/arch/powerpc/boot/dts/fsl/p1022ds.dtsi
index 149da0f..ddefbf6 100644
--- a/arch/powerpc/boot/dts/fsl/p1022ds.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1022ds.dtsi
@@ -160,7 +160,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
diff --git a/arch/powerpc/boot/dts/fsl/p1022rdk.dts b/arch/powerpc/boot/dts/fsl/p1022rdk.dts
index 04c1633..d505d7c 100644
--- a/arch/powerpc/boot/dts/fsl/p1022rdk.dts
+++ b/arch/powerpc/boot/dts/fsl/p1022rdk.dts
@@ -86,7 +86,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,m25p80";
+ compatible = "spansion,m25p80", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <1000000>;
partition@0 {
diff --git a/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi
index b05dcb4..b4d0586 100644
--- a/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi
@@ -129,7 +129,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,m25p80";
+ compatible = "spansion,m25p80", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
diff --git a/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi
index f502564..d44bb12 100644
--- a/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi
@@ -137,7 +137,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
diff --git a/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi
index ad2e242..03c9afc 100644
--- a/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi
@@ -151,7 +151,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,m25p80";
+ compatible = "spansion,m25p80", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
diff --git a/arch/powerpc/boot/dts/fsl/p2020rdb.dts b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
index 70cf090..435a319 100644
--- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
@@ -155,7 +155,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
diff --git a/arch/powerpc/boot/dts/fsl/p2041rdb.dts b/arch/powerpc/boot/dts/fsl/p2041rdb.dts
index e9bd894..e50fea9 100644
--- a/arch/powerpc/boot/dts/fsl/p2041rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/p2041rdb.dts
@@ -1,7 +1,7 @@
/*
* P2041RDB Device Tree Source
*
- * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,19 @@
#size-cells = <2>;
interrupt-parent = <&mpic>;
+ aliases {
+ phy_rgmii_0 = &phy_rgmii_0;
+ phy_rgmii_1 = &phy_rgmii_1;
+ phy_sgmii_2 = &phy_sgmii_2;
+ phy_sgmii_3 = &phy_sgmii_3;
+ phy_sgmii_4 = &phy_sgmii_4;
+ phy_sgmii_1c = &phy_sgmii_1c;
+ phy_sgmii_1d = &phy_sgmii_1d;
+ phy_sgmii_1e = &phy_sgmii_1e;
+ phy_sgmii_1f = &phy_sgmii_1f;
+ phy_xgmii_2 = &phy_xgmii_2;
+ };
+
memory {
device_type = "memory";
};
@@ -83,7 +96,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@u-boot {
@@ -137,6 +150,83 @@
usb1: usb@211000 {
dr_mode = "host";
};
+
+ fman@400000 {
+ ethernet@e0000 {
+ phy-handle = <&phy_sgmii_2>;
+ phy-connection-type = "sgmii";
+ };
+
+ mdio@e1120 {
+ phy_rgmii_0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+
+ phy_rgmii_1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+
+ phy_sgmii_2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+
+ phy_sgmii_3: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+
+ phy_sgmii_4: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+
+ phy_sgmii_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&phy_sgmii_3>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&phy_sgmii_4>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&phy_rgmii_1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&phy_rgmii_0>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@f0000 {
+ phy-handle = <&phy_xgmii_2>;
+ phy-connection-type = "xgmii";
+ };
+
+ mdio@f1000 {
+ phy_xgmii_2: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ };
+ };
+ };
};
rio: rapidio@ffe0c0000 {
diff --git a/arch/powerpc/boot/dts/fsl/p3041ds.dts b/arch/powerpc/boot/dts/fsl/p3041ds.dts
index f2b1d40..40748e4 100644
--- a/arch/powerpc/boot/dts/fsl/p3041ds.dts
+++ b/arch/powerpc/boot/dts/fsl/p3041ds.dts
@@ -1,7 +1,7 @@
/*
* P3041DS Device Tree Source
*
- * Copyright 2010 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2010 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,20 @@
#size-cells = <2>;
interrupt-parent = <&mpic>;
+ aliases{
+ phy_rgmii_0 = &phy_rgmii_0;
+ phy_rgmii_1 = &phy_rgmii_1;
+ phy_sgmii_1c = &phy_sgmii_1c;
+ phy_sgmii_1d = &phy_sgmii_1d;
+ phy_sgmii_1e = &phy_sgmii_1e;
+ phy_sgmii_1f = &phy_sgmii_1f;
+ phy_xgmii_1 = &phy_xgmii_1;
+ phy_xgmii_2 = &phy_xgmii_2;
+ emi1_rgmii = &hydra_mdio_rgmii;
+ emi1_sgmii = &hydra_mdio_sgmii;
+ emi2_xgmii = &hydra_mdio_xgmii;
+ };
+
memory {
device_type = "memory";
};
@@ -83,7 +97,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <35000000>; /* input clock */
partition@u-boot {
@@ -150,6 +164,52 @@
reg = <0x4c>;
};
};
+
+ fman@400000{
+ ethernet@e0000 {
+ phy-handle = <&phy_sgmii_1c>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&phy_sgmii_1d>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&phy_sgmii_1e>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&phy_sgmii_1f>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&phy_rgmii_1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@f0000 {
+ phy-handle = <&phy_xgmii_1>;
+ phy-connection-type = "xgmii";
+ };
+
+ hydra_mdio_xgmii: mdio@f1000 {
+ status = "disabled";
+
+ phy_xgmii_1: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x4>;
+ };
+
+ phy_xgmii_2: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ };
+ };
+ };
};
rio: rapidio@ffe0c0000 {
@@ -215,8 +275,58 @@
};
board-control@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
reg = <3 0 0x30>;
+ ranges = <0 3 0 0x30>;
+
+ mdio-mux-emi1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&mdio0>;
+ reg = <9 1>;
+ mux-mask = <0x78>;
+
+ hydra_mdio_rgmii: rgmii-mdio@8 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <8>;
+ status = "disabled";
+
+ phy_rgmii_0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+
+ phy_rgmii_1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ };
+
+ hydra_mdio_sgmii: sgmii-mdio@28 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x28>;
+ status = "disabled";
+
+ phy_sgmii_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/p4080ds.dts b/arch/powerpc/boot/dts/fsl/p4080ds.dts
index 28a55c5..816b978 100644
--- a/arch/powerpc/boot/dts/fsl/p4080ds.dts
+++ b/arch/powerpc/boot/dts/fsl/p4080ds.dts
@@ -1,7 +1,7 @@
/*
* P4080DS Device Tree Source
*
- * Copyright 2009 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2009 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,20 @@
#size-cells = <2>;
interrupt-parent = <&mpic>;
+ aliases {
+ phy_rgmii = &phyrgmii;
+ phy5_slot3 = &phy5slot3;
+ phy6_slot3 = &phy6slot3;
+ phy7_slot3 = &phy7slot3;
+ phy8_slot3 = &phy8slot3;
+ emi1_slot3 = &p4080mdio2;
+ emi1_slot4 = &p4080mdio1;
+ emi1_slot5 = &p4080mdio3;
+ emi1_rgmii = &p4080mdio0;
+ emi2_slot4 = &p4080xmdio1;
+ emi2_slot5 = &p4080xmdio3;
+ };
+
memory {
device_type = "memory";
};
@@ -84,7 +98,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@u-boot {
@@ -137,6 +151,60 @@
dr_mode = "host";
phy_type = "ulpi";
};
+
+ fman@400000 {
+ ethernet@e0000 {
+ phy-handle = <&phy0>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&phy2>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&phy3>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@f0000 {
+ phy-handle = <&phy10>;
+ phy-connection-type = "xgmii";
+ };
+ };
+
+ fman@500000 {
+ ethernet@e0000 {
+ phy-handle = <&phy5>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&phy6>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&phy7>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&phy8>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@f0000 {
+ phy-handle = <&phy11>;
+ phy-connection-type = "xgmii";
+ };
+ };
};
rio: rapidio@ffe0c0000 {
@@ -213,6 +281,120 @@
};
};
+ mdio-mux-emi1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mdio-mux-gpio", "mdio-mux";
+ mdio-parent-bus = <&mdio0>;
+ gpios = <&gpio0 1 0>, <&gpio0 0 0>;
+
+ p4080mdio0: mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ phyrgmii: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+
+ p4080mdio1: mdio@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ phy5: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy6: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy7: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy8: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ p4080mdio2: mdio@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ status = "disabled";
+
+ phy5slot3: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy6slot3: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy7slot3: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy8slot3: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ p4080mdio3: mdio@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ phy0: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy1: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy2: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy3: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+ };
+
+ mdio-mux-emi2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mdio-mux-gpio", "mdio-mux";
+ mdio-parent-bus = <&xmdio0>;
+ gpios = <&gpio0 3 0>, <&gpio0 2 0>;
+
+ p4080xmdio1: mdio@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ phy11: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ };
+ };
+
+ p4080xmdio3: mdio@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ phy10: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x4>;
+ };
+ };
+ };
};
/include/ "p4080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p5020ds.dts b/arch/powerpc/boot/dts/fsl/p5020ds.dts
index 920dc77..cd6f373 100644
--- a/arch/powerpc/boot/dts/fsl/p5020ds.dts
+++ b/arch/powerpc/boot/dts/fsl/p5020ds.dts
@@ -1,7 +1,7 @@
/*
* P5020DS Device Tree Source
*
- * Copyright 2010 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2010 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,20 @@
#size-cells = <2>;
interrupt-parent = <&mpic>;
+ aliases {
+ phy_rgmii_0 = &phy_rgmii_0;
+ phy_rgmii_1 = &phy_rgmii_1;
+ phy_sgmii_1c = &phy_sgmii_1c;
+ phy_sgmii_1d = &phy_sgmii_1d;
+ phy_sgmii_1e = &phy_sgmii_1e;
+ phy_sgmii_1f = &phy_sgmii_1f;
+ phy_xgmii_1 = &phy_xgmii_1;
+ phy_xgmii_2 = &phy_xgmii_2;
+ emi1_rgmii = &hydra_mdio_rgmii;
+ emi1_sgmii = &hydra_mdio_sgmii;
+ emi2_xgmii = &hydra_mdio_xgmii;
+ };
+
memory {
device_type = "memory";
};
@@ -83,7 +97,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@u-boot {
@@ -150,6 +164,52 @@
reg = <0x4c>;
};
};
+
+ fman@400000 {
+ ethernet@e0000 {
+ phy-handle = <&phy_sgmii_1c>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&phy_sgmii_1d>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&phy_sgmii_1e>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&phy_sgmii_1f>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&phy_rgmii_1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@f0000 {
+ phy-handle = <&phy_xgmii_1>;
+ phy-connection-type = "xgmii";
+ };
+
+ hydra_mdio_xgmii: mdio@f1000 {
+ status = "disabled";
+
+ phy_xgmii_1: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x4>;
+ };
+
+ phy_xgmii_2: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ };
+ };
+ };
};
rio: rapidio@ffe0c0000 {
@@ -215,8 +275,58 @@
};
board-control@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis";
reg = <3 0 0x30>;
+ ranges = <0 3 0 0x30>;
+
+ mdio-mux-emi1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&mdio0>;
+ reg = <9 1>;
+ mux-mask = <0x78>;
+
+ hydra_mdio_rgmii: rgmii-mdio@8 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <8>;
+ status = "disabled";
+
+ phy_rgmii_0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+
+ phy_rgmii_1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ };
+
+ hydra_mdio_sgmii: sgmii-mdio@28 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x28>;
+ status = "disabled";
+
+ phy_sgmii_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/p5040ds.dts b/arch/powerpc/boot/dts/fsl/p5040ds.dts
index e169cc2..4508473 100644
--- a/arch/powerpc/boot/dts/fsl/p5040ds.dts
+++ b/arch/powerpc/boot/dts/fsl/p5040ds.dts
@@ -1,7 +1,7 @@
/*
* P5040DS Device Tree Source
*
- * Copyright 2012 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,32 @@
#size-cells = <2>;
interrupt-parent = <&mpic>;
+ aliases{
+ phy_sgmii_slot2_1c = &phy_sgmii_slot2_1c;
+ phy_sgmii_slot2_1d = &phy_sgmii_slot2_1d;
+ phy_sgmii_slot2_1e = &phy_sgmii_slot2_1e;
+ phy_sgmii_slot2_1f = &phy_sgmii_slot2_1f;
+ phy_sgmii_slot3_1c = &phy_sgmii_slot3_1c;
+ phy_sgmii_slot3_1d = &phy_sgmii_slot3_1d;
+ phy_sgmii_slot3_1e = &phy_sgmii_slot3_1e;
+ phy_sgmii_slot3_1f = &phy_sgmii_slot3_1f;
+ phy_sgmii_slot5_1c = &phy_sgmii_slot5_1c;
+ phy_sgmii_slot5_1d = &phy_sgmii_slot5_1d;
+ phy_sgmii_slot5_1e = &phy_sgmii_slot5_1e;
+ phy_sgmii_slot5_1f = &phy_sgmii_slot5_1f;
+ phy_sgmii_slot6_1c = &phy_sgmii_slot6_1c;
+ phy_sgmii_slot6_1d = &phy_sgmii_slot6_1d;
+ phy_sgmii_slot6_1e = &phy_sgmii_slot6_1e;
+ phy_sgmii_slot6_1f = &phy_sgmii_slot6_1f;
+ hydra_rg = &hydra_rg;
+ hydra_sg_slot2 = &hydra_sg_slot2;
+ hydra_sg_slot3 = &hydra_sg_slot3;
+ hydra_sg_slot5 = &hydra_sg_slot5;
+ hydra_sg_slot6 = &hydra_sg_slot6;
+ hydra_xg_slot1 = &hydra_xg_slot1;
+ hydra_xg_slot2 = &hydra_xg_slot2;
+ };
+
memory {
device_type = "memory";
};
@@ -83,7 +109,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@u-boot {
@@ -147,6 +173,62 @@
reg = <0x4c>;
};
};
+
+ fman@400000 {
+ ethernet@e0000 {
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e6000 {
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&phy_rgmii_0>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@f0000 {
+ phy-handle = <&phy_xgmii_slot_2>;
+ phy-connection-type = "xgmii";
+ };
+ };
+
+ fman@500000 {
+ ethernet@e0000 {
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e6000 {
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&phy_rgmii_1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@f0000 {
+ phy-handle = <&phy_xgmii_slot_1>;
+ phy-connection-type = "xgmii";
+ };
+ };
};
lbc: localbus@ffe124000 {
@@ -200,8 +282,158 @@
};
board-control@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "fsl,p5040ds-fpga", "fsl,fpga-ngpixis";
reg = <3 0 0x40>;
+ ranges = <0 3 0 0x40>;
+
+ mdio-mux-emi1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&mdio0>;
+ reg = <9 1>;
+ mux-mask = <0x78>;
+
+ hydra_rg:rgmii-mdio@8 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <8>;
+ status = "disabled";
+
+ phy_rgmii_0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+
+ phy_rgmii_1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ };
+
+ hydra_sg_slot2: sgmii-mdio@28 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x28>;
+ status = "disabled";
+
+ phy_sgmii_slot2_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_slot2_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_slot2_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_slot2_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ hydra_sg_slot3: sgmii-mdio@68 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x68>;
+ status = "disabled";
+
+ phy_sgmii_slot3_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_slot3_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_slot3_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_slot3_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ hydra_sg_slot5: sgmii-mdio@38 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x38>;
+ status = "disabled";
+
+ phy_sgmii_slot5_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_slot5_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_slot5_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_slot5_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+ hydra_sg_slot6: sgmii-mdio@48 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x48>;
+ status = "disabled";
+
+ phy_sgmii_slot6_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_slot6_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_slot6_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_slot6_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+ };
+
+ mdio-mux-emi2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&xmdio0>;
+ reg = <9 1>;
+ mux-mask = <0x06>;
+
+ hydra_xg_slot1: hydra-xg-slot1@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ status = "disabled";
+
+ phy_xgmii_slot_1: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <4>;
+ };
+ };
+
+ hydra_xg_slot2: hydra-xg-slot2@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ phy_xgmii_slot_2: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+ };
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
index 2f227b1..e2bd931 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
@@ -420,6 +420,7 @@
fsl,iommu-parent = <&pamu4>;
};
+/include/ "qoriq-raid1.0-0.dtsi"
/include/ "qoriq-qman1.dtsi"
/include/ "qoriq-bman1.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
index 0659d5bb..dbd5775 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
@@ -73,6 +73,12 @@
rtic_d = &rtic_d;
sec_mon = &sec_mon;
+ raideng = &raideng;
+ raideng_jr0 = &raideng_jr0;
+ raideng_jr1 = &raideng_jr1;
+ raideng_jr2 = &raideng_jr2;
+ raideng_jr3 = &raideng_jr3;
+
fman0 = &fman0;
fman1 = &fman1;
ethernet0 = &enet0;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
index 2e441fa..e1a961f 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
@@ -55,6 +55,7 @@
reg = <0xe0000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy0>;
};
mdio@e1000 {
@@ -62,5 +63,9 @@
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe1000 0x1000>;
+
+ pcsphy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
index 0b8f87f..c288f3c 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
@@ -52,6 +52,7 @@
compatible = "fsl,fman-memac";
reg = <0xf0000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
+ pcsphy-handle = <&pcsphy6>;
};
mdio@f1000 {
@@ -59,5 +60,9 @@
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xf1000 0x1000>;
+
+ pcsphy6: ethernet-phy@0 {
+ reg = <0x0>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
index ba6f227..94f3e71 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
@@ -55,6 +55,7 @@
reg = <0xe2000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy1>;
};
mdio@e3000 {
@@ -62,5 +63,9 @@
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe3000 0x1000>;
+
+ pcsphy1: ethernet-phy@0 {
+ reg = <0x0>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
index 8860038..94a7698 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
@@ -52,6 +52,7 @@
compatible = "fsl,fman-memac";
reg = <0xf2000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>;
+ pcsphy-handle = <&pcsphy7>;
};
mdio@f3000 {
@@ -59,5 +60,9 @@
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xf3000 0x1000>;
+
+ pcsphy7: ethernet-phy@0 {
+ reg = <0x0>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
index ace9c13..b5ff5f7 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
@@ -51,6 +51,7 @@
reg = <0xe0000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy0>;
};
mdio@e1000 {
@@ -58,5 +59,9 @@
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe1000 0x1000>;
+
+ pcsphy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
index a4fc286..ee44182 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
@@ -51,6 +51,7 @@
reg = <0xe2000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy1>;
};
mdio@e3000 {
@@ -58,5 +59,9 @@
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe3000 0x1000>;
+
+ pcsphy1: ethernet-phy@0 {
+ reg = <0x0>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
index 78596fa..f05f0d7 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
@@ -51,6 +51,7 @@
reg = <0xe4000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy2>;
};
mdio@e5000 {
@@ -58,5 +59,9 @@
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe5000 0x1000>;
+
+ pcsphy2: ethernet-phy@0 {
+ reg = <0x0>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
index af93abd..a9114ec 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
@@ -51,6 +51,7 @@
reg = <0xe6000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy3>;
};
mdio@e7000 {
@@ -58,5 +59,9 @@
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe7000 0x1000>;
+
+ pcsphy3: ethernet-phy@0 {
+ reg = <0x0>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
index 97cffd7..44dd00a 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
@@ -51,6 +51,7 @@
reg = <0xe8000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy4>;
};
mdio@e9000 {
@@ -58,5 +59,9 @@
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe9000 0x1000>;
+
+ pcsphy4: ethernet-phy@0 {
+ reg = <0x0>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
index 232c5c2..5b1b84b 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
@@ -51,6 +51,7 @@
reg = <0xea000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>;
ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy5>;
};
mdio@eb000 {
@@ -58,5 +59,9 @@
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xeb000 0x1000>;
+
+ pcsphy5: ethernet-phy@0 {
+ reg = <0x0>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
index 89d64ee..0e1daae 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
@@ -52,6 +52,7 @@
compatible = "fsl,fman-memac";
reg = <0xf0000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
+ pcsphy-handle = <&pcsphy14>;
};
mdio@f1000 {
@@ -59,5 +60,9 @@
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xf1000 0x1000>;
+
+ pcsphy14: ethernet-phy@0 {
+ reg = <0x0>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
index 7fa9260..68c5ef7 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
@@ -52,6 +52,7 @@
compatible = "fsl,fman-memac";
reg = <0xf2000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x11 &fman1_tx_0x31>;
+ pcsphy-handle = <&pcsphy15>;
};
mdio@f3000 {
@@ -59,5 +60,9 @@
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xf3000 0x1000>;
+
+ pcsphy15: ethernet-phy@0 {
+ reg = <0x0>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
index 3d23666..605363c 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
@@ -51,6 +51,7 @@
reg = <0xe0000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>;
ptp-timer = <&ptp_timer1>;
+ pcsphy-handle = <&pcsphy8>;
};
mdio@e1000 {
@@ -58,5 +59,9 @@
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe1000 0x1000>;
+
+ pcsphy8: ethernet-phy@0 {
+ reg = <0x0>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
index 97dc2ee..1955dfa 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
@@ -51,6 +51,7 @@
reg = <0xe2000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>;
ptp-timer = <&ptp_timer1>;
+ pcsphy-handle = <&pcsphy9>;
};
mdio@e3000 {
@@ -58,5 +59,9 @@
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe3000 0x1000>;
+
+ pcsphy9: ethernet-phy@0 {
+ reg = <0x0>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
index f084dd2f..2c14764 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
@@ -51,6 +51,7 @@
reg = <0xe4000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>;
ptp-timer = <&ptp_timer1>;
+ pcsphy-handle = <&pcsphy10>;
};
mdio@e5000 {
@@ -58,5 +59,9 @@
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe5000 0x1000>;
+
+ pcsphy10: ethernet-phy@0 {
+ reg = <0x0>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
index bb627b3..b8b541f 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
@@ -51,6 +51,7 @@
reg = <0xe6000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>;
ptp-timer = <&ptp_timer1>;
+ pcsphy-handle = <&pcsphy11>;
};
mdio@e7000 {
@@ -58,5 +59,9 @@
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe7000 0x1000>;
+
+ pcsphy11: ethernet-phy@0 {
+ reg = <0x0>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
index 821ed12..4b2cfdd 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
@@ -51,6 +51,7 @@
reg = <0xe8000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>;
ptp-timer = <&ptp_timer1>;
+ pcsphy-handle = <&pcsphy12>;
};
mdio@e9000 {
@@ -58,5 +59,9 @@
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe9000 0x1000>;
+
+ pcsphy12: ethernet-phy@0 {
+ reg = <0x0>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
index e245f1a..0a52ddf 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
@@ -51,6 +51,7 @@
reg = <0xea000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x0d &fman1_tx_0x2d>;
ptp-timer = <&ptp_timer1>;
+ pcsphy-handle = <&pcsphy13>;
};
mdio@eb000 {
@@ -58,5 +59,9 @@
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xeb000 0x1000>;
+
+ pcsphy13: ethernet-phy@0 {
+ reg = <0x0>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/sbc8641d.dts b/arch/powerpc/boot/dts/fsl/sbc8641d.dts
new file mode 100644
index 0000000..0a9733c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/sbc8641d.dts
@@ -0,0 +1,203 @@
+/*
+ * SBC8641D Device Tree Source
+ *
+ * Copyright 2008 Wind River Systems Inc.
+ *
+ * Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+ model = "SBC8641D";
+ compatible = "wind,sbc8641";
+
+ aliases {
+ pci1 = &pci1;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; // 512M at 0x0
+ };
+
+ lbc: localbus@f8005000 {
+ reg = <0xf8005000 0x1000>;
+
+ ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
+ 1 0 0xf0000000 0x00010000 // 64KB EEPROM
+ 2 0 0xf1000000 0x00100000 // EPLD (1MB)
+ 3 0 0xe0000000 0x04000000 // 64MB LB SDRAM (CS3)
+ 4 0 0xe4000000 0x04000000 // 64MB LB SDRAM (CS4)
+ 6 0 0xf4000000 0x00100000 // LCD display (1MB)
+ 7 0 0xe8000000 0x04000000>; // 64MB OneNAND
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x01000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "dtb";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+ partition@300000 {
+ label = "kernel";
+ reg = <0x00100000 0x00400000>;
+ read-only;
+ };
+ partition@400000 {
+ label = "fs";
+ reg = <0x00500000 0x00a00000>;
+ };
+ partition@700000 {
+ label = "firmware";
+ reg = <0x00f00000 0x00100000>;
+ read-only;
+ };
+ };
+
+ epld@2,0 {
+ compatible = "wrs,epld-localbus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <2 0 0x100000>;
+ ranges = <0 0 5 0 1 // User switches
+ 1 0 5 1 1 // Board ID/Rev
+ 3 0 5 3 1>; // LEDs
+ };
+ };
+
+ soc: soc@f8000000 {
+ ranges = <0x00000000 0xf8000000 0x00100000>;
+
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ phy1: ethernet-phy@0 {
+ reg = <0>;
+ };
+ phy2: ethernet-phy@1 {
+ reg = <1>;
+ };
+ phy3: ethernet-phy@2 {
+ reg = <2>;
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet1: ethernet@25000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@26000 {
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet3: ethernet@27000 {
+ tbi-handle = <&tbi3>;
+ phy-handle = <&phy3>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@27520 {
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ pci0: pcie@f8008000 {
+ reg = <0xf8008000 0x1000>;
+ ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ interrupt-map-mask = <0xff00 0 0 7>;
+
+ pcie@0 {
+ ranges = <0x02000000 0x0 0x80000000
+ 0x02000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00100000>;
+ };
+
+ };
+
+ pci1: pcie@f8009000 {
+ compatible = "fsl,mpc8641-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xf8009000 0x1000>;
+ bus-range = <0 0xff>;
+ ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
+ clock-frequency = <100000000>;
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0x0000 0 0 1 &mpic 4 1
+ 0x0000 0 0 2 &mpic 5 1
+ 0x0000 0 0 3 &mpic 6 1
+ 0x0000 0 0 4 &mpic 7 1
+ >;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0xa0000000
+ 0x02000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00100000>;
+ };
+ };
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1023rdb.dts b/arch/powerpc/boot/dts/fsl/t1023rdb.dts
index 6bd842b..2975762 100644
--- a/arch/powerpc/boot/dts/fsl/t1023rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1023rdb.dts
@@ -79,7 +79,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25fl512s";
+ compatible = "spansion,s25fl512s", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>; /* input clk */
};
@@ -111,6 +111,47 @@
shunt-resistor = <1000>;
};
};
+
+ fman@400000 {
+ fm1mac1: ethernet@e0000 {
+ phy-handle = <&sgmii_rtk_phy2>;
+ phy-connection-type = "sgmii";
+ sleep = <&rcpm 0x80000000>;
+ };
+
+ fm1mac2: ethernet@e2000 {
+ sleep = <&rcpm 0x40000000>;
+ };
+
+ fm1mac3: ethernet@e4000 {
+ phy-handle = <&sgmii_aqr_phy3>;
+ phy-connection-type = "sgmii-2500";
+ sleep = <&rcpm 0x20000000>;
+ };
+
+ fm1mac4: ethernet@e6000 {
+ phy-handle = <&rgmii_rtk_phy1>;
+ phy-connection-type = "rgmii";
+ sleep = <&rcpm 0x10000000>;
+ };
+
+
+ mdio0: mdio@fc000 {
+ rgmii_rtk_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ sgmii_rtk_phy2: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+ };
+
+ xmdio0: mdio@fd000 {
+ sgmii_aqr_phy3: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x2>;
+ };
+ };
+ };
};
pci0: pcie@ffe240000 {
diff --git a/arch/powerpc/boot/dts/fsl/t1024qds.dts b/arch/powerpc/boot/dts/fsl/t1024qds.dts
index 6a3581b..772143d 100644
--- a/arch/powerpc/boot/dts/fsl/t1024qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t1024qds.dts
@@ -87,7 +87,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,n25q128a11"; /* 16MB */
+ compatible = "micron,n25q128a11", "jedec,spi-nor"; /* 16MB */
reg = <0>;
spi-max-frequency = <10000000>;
};
@@ -95,7 +95,7 @@
flash@1 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "sst,sst25wf040"; /* 512KB */
+ compatible = "sst,sst25wf040", "jedec,spi-nor"; /* 512KB */
reg = <1>;
spi-max-frequency = <10000000>;
};
@@ -103,7 +103,7 @@
flash@2 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "eon,en25s64"; /* 8MB */
+ compatible = "eon,en25s64", "jedec,spi-nor"; /* 8MB */
reg = <2>;
spi-max-frequency = <10000000>;
};
diff --git a/arch/powerpc/boot/dts/fsl/t1024rdb.dts b/arch/powerpc/boot/dts/fsl/t1024rdb.dts
index 0ccc7d0..302cdd2 100644
--- a/arch/powerpc/boot/dts/fsl/t1024rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1024rdb.dts
@@ -89,7 +89,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,n25q512ax3";
+ compatible = "micron,n25q512ax3", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>; /* input clk */
};
@@ -140,6 +140,51 @@
#size-cells = <0>;
};
};
+
+ fman@400000 {
+ fm1mac1: ethernet@e0000 {
+ phy-handle = <&xg_aqr105_phy3>;
+ phy-connection-type = "xgmii";
+ sleep = <&rcpm 0x80000000>;
+ };
+
+ fm1mac2: ethernet@e2000 {
+ sleep = <&rcpm 0x40000000>;
+ };
+
+ fm1mac3: ethernet@e4000 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii";
+ sleep = <&rcpm 0x20000000>;
+ };
+
+ fm1mac4: ethernet@e6000 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii";
+ sleep = <&rcpm 0x10000000>;
+ };
+
+
+ mdio0: mdio@fc000 {
+ rgmii_phy1: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ rgmii_phy2: ethernet-phy@6 {
+ reg = <0x6>;
+ };
+ };
+
+ xmdio0: mdio@fd000 {
+ xg_aqr105_phy3: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x1>;
+ };
+ sg_2500_aqr105_phy4: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x2>;
+ };
+ };
+ };
};
pci0: pcie@ffe240000 {
diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
index cf19415..621f2c6 100644
--- a/arch/powerpc/boot/dts/fsl/t1040rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
@@ -1,7 +1,7 @@
/*
* T1040RDB Device Tree Source
*
- * Copyright 2014 Freescale Semiconductor Inc.
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -38,6 +38,36 @@
/ {
model = "fsl,T1040RDB";
compatible = "fsl,T1040RDB";
+
+ aliases {
+ phy_sgmii_2 = &phy_sgmii_2;
+ };
+
+ soc@ffe000000 {
+ fman@400000 {
+ ethernet@e0000 {
+ fixed-link = <0 1 1000 0 0>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ fixed-link = <1 1 1000 0 0>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&phy_sgmii_2>;
+ phy-connection-type = "sgmii";
+ };
+
+ mdio@fc000 {
+ phy_sgmii_2: ethernet-phy@03 {
+ reg = <0x03>;
+ };
+ };
+ };
+ };
+
ifc: localbus@ffe124000 {
cpld@3,0 {
compatible = "fsl,t1040rdb-cpld";
diff --git a/arch/powerpc/boot/dts/fsl/t1042rdb.dts b/arch/powerpc/boot/dts/fsl/t1042rdb.dts
index 8d908e7..2c13862 100644
--- a/arch/powerpc/boot/dts/fsl/t1042rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1042rdb.dts
@@ -1,7 +1,7 @@
/*
* T1042RDB Device Tree Source
*
- * Copyright 2014 Freescale Semiconductor Inc.
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -38,6 +38,34 @@
/ {
model = "fsl,T1042RDB";
compatible = "fsl,T1042RDB";
+
+ aliases {
+ phy_sgmii_2 = &phy_sgmii_2;
+ };
+
+ soc@ffe000000 {
+ fman@400000 {
+ ethernet@e0000 {
+ status = "disabled";
+ };
+
+ ethernet@e2000 {
+ status = "disabled";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&phy_sgmii_2>;
+ phy-connection-type = "sgmii";
+ };
+
+ mdio@fc000 {
+ phy_sgmii_2: ethernet-phy@03 {
+ reg = <0x03>;
+ };
+ };
+ };
+ };
+
ifc: localbus@ffe124000 {
cpld@3,0 {
compatible = "fsl,t1042rdb-cpld";
diff --git a/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts
index 98c0010..8ec3ff4 100644
--- a/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts
+++ b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts
@@ -1,7 +1,7 @@
/*
* T1042RDB_PI Device Tree Source
*
- * Copyright 2014 Freescale Semiconductor Inc.
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -38,11 +38,13 @@
/ {
model = "fsl,T1042RDB_PI";
compatible = "fsl,T1042RDB_PI";
+
ifc: localbus@ffe124000 {
cpld@3,0 {
compatible = "fsl,t1042rdb_pi-cpld";
};
};
+
soc: soc@ffe000000 {
i2c@118000 {
rtc@68 {
@@ -51,6 +53,20 @@
interrupts = <0x2 0x1 0 0>;
};
};
+
+ fman@400000 {
+ ethernet@e0000 {
+ status = "disabled";
+ };
+
+ ethernet@e2000 {
+ status = "disabled";
+ };
+
+ ethernet@e4000 {
+ status = "disabled";
+ };
+ };
};
};
diff --git a/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi
index 3f6d7c6..8c7ea6c 100644
--- a/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi
@@ -104,7 +104,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,n25q512ax3";
+ compatible = "micron,n25q512ax3", "jedec,spi-nor";
reg = <0>;
/* input clock */
spi-max-frequency = <10000000>;
diff --git a/arch/powerpc/boot/dts/fsl/t104xqds.dtsi b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi
index 1498d1e..977af35 100644
--- a/arch/powerpc/boot/dts/fsl/t104xqds.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi
@@ -1,7 +1,7 @@
/*
* T104xQDS Device Tree Source
*
- * Copyright 2013 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2013 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -38,6 +38,33 @@
#size-cells = <2>;
interrupt-parent = <&mpic>;
+ aliases {
+ emi1_rgmii0 = &t1040mdio0;
+ emi1_rgmii1 = &t1040mdio1;
+ emi1_slot3 = &t1040mdio3;
+ emi1_slot5 = &t1040mdio5;
+ emi1_slot6 = &t1040mdio6;
+ emi1_slot7 = &t1040mdio7;
+ rgmii_phy1 = &rgmii_phy1;
+ rgmii_phy2 = &rgmii_phy2;
+ phy_s3_01 = &phy_s3_01;
+ phy_s3_02 = &phy_s3_02;
+ phy_s3_03 = &phy_s3_03;
+ phy_s3_04 = &phy_s3_04;
+ phy_s5_01 = &phy_s5_01;
+ phy_s5_02 = &phy_s5_02;
+ phy_s5_03 = &phy_s5_03;
+ phy_s5_04 = &phy_s5_04;
+ phy_s6_01 = &phy_s6_01;
+ phy_s6_02 = &phy_s6_02;
+ phy_s6_03 = &phy_s6_03;
+ phy_s6_04 = &phy_s6_04;
+ phy_s7_01 = &phy_s7_01;
+ phy_s7_02 = &phy_s7_02;
+ phy_s7_03 = &phy_s7_03;
+ phy_s7_04 = &phy_s7_04;
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -85,6 +112,128 @@
#size-cells = <1>;
compatible = "fsl,fpga-qixis";
reg = <3 0 0x300>;
+ ranges = <0 3 0 0x300>;
+
+ mdio-mux-emi1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&mdio0>;
+ reg = <0x54 1>;
+ mux-mask = <0xe0>;
+
+ t1040mdio0: mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x00>;
+ status = "disabled";
+
+ rgmii_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ };
+
+ t1040mdio1: mdio@20 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x20>;
+ status = "disabled";
+
+ rgmii_phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ };
+
+ t1040mdio3: mdio@60 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x60>;
+ status = "disabled";
+
+ phy_s3_01: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_s3_02: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_s3_03: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_s3_04: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ t1040mdio5: mdio@a0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xa0>;
+
+ phy_s5_01: ethernet-phy@1c {
+ reg = <0x14>;
+ };
+
+ phy_s5_02: ethernet-phy@1d {
+ reg = <0x15>;
+ };
+
+ phy_s5_03: ethernet-phy@1e {
+ reg = <0x16>;
+ };
+
+ phy_s5_04: ethernet-phy@1f {
+ reg = <0x17>;
+ };
+ };
+
+ t1040mdio6: mdio@c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xc0>;
+
+ phy_s6_01: ethernet-phy@1c {
+ reg = <0x18>;
+ };
+
+ phy_s6_02: ethernet-phy@1d {
+ reg = <0x19>;
+ };
+
+ phy_s6_03: ethernet-phy@1e {
+ reg = <0x1a>;
+ };
+
+ phy_s6_04: ethernet-phy@1f {
+ reg = <0x1b>;
+ };
+ };
+
+ t1040mdio7: mdio@e0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xe0>;
+ status = "disabled";
+
+ phy_s7_01: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_s7_02: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_s7_03: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_s7_04: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+ };
};
};
@@ -112,7 +261,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,n25q128a11";
+ compatible = "micron,n25q128a11", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>; /* input clock */
};
@@ -129,6 +278,33 @@
interrupts = <0x1 0x1 0 0>;
};
};
+
+ fman@400000 {
+ ethernet@e0000 {
+ fixed-link = <0 1 1000 0 0>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ fixed-link = <1 1 1000 0 0>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&phy_s7_03>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii";
+ };
+ };
};
pci0: pcie@ffe240000 {
diff --git a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
index 830ea48..72691ef 100644
--- a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
@@ -1,7 +1,7 @@
/*
* T1040RDB/T1042RDB Device Tree Source
*
- * Copyright 2014 Freescale Semiconductor Inc.
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -33,6 +33,12 @@
*/
/ {
+ aliases {
+ phy_rgmii_0 = &phy_rgmii_0;
+ phy_rgmii_1 = &phy_rgmii_1;
+ phy_sgmii_2 = &phy_sgmii_2;
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -103,10 +109,15 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,n25q512a";
+ compatible = "micron,n25q512a", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>; /* input clock */
};
+ slic@3 {
+ compatible = "maxim,ds26522";
+ reg = <3>;
+ spi-max-frequency = <2000000>; /* input clock */
+ };
};
i2c@118000 {
@@ -125,6 +136,31 @@
};
};
+ fman@400000 {
+ ethernet@e6000 {
+ phy-handle = <&phy_rgmii_0>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&phy_rgmii_1>;
+ phy-connection-type = "rgmii";
+ };
+
+ mdio0: mdio@fc000 {
+ phy_sgmii_2: ethernet-phy@03 {
+ reg = <0x03>;
+ };
+
+ phy_rgmii_0: ethernet-phy@01 {
+ reg = <0x01>;
+ };
+
+ phy_rgmii_1: ethernet-phy@02 {
+ reg = <0x02>;
+ };
+ };
+ };
};
pci0: pcie@ffe240000 {
diff --git a/arch/powerpc/boot/dts/fsl/t2080qds.dts b/arch/powerpc/boot/dts/fsl/t2080qds.dts
index 9c8e10f..8d190e8 100644
--- a/arch/powerpc/boot/dts/fsl/t2080qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t2080qds.dts
@@ -1,7 +1,7 @@
/*
* T2080QDS Device Tree Source
*
- * Copyright 2013 Freescale Semiconductor Inc.
+ * Copyright 2013 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -42,6 +42,12 @@
#size-cells = <2>;
interrupt-parent = <&mpic>;
+ aliases {
+ emi1_slot1 = &t2080mdio2;
+ emi1_slot2 = &t2080mdio3;
+ emi1_slot3 = &t2080mdio4;
+ };
+
rio: rapidio@ffe0c0000 {
reg = <0xf 0xfe0c0000 0 0x11000>;
@@ -54,4 +60,154 @@
};
};
+&soc {
+ fman@400000 {
+ ethernet@e0000 {
+ phy-handle = <&phy_sgmii_s3_1e>;
+ phy-connection-type = "xgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&phy_sgmii_s3_1f>;
+ phy-connection-type = "xgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&phy_sgmii_s2_1e>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@ea000 {
+ phy-handle = <&phy_sgmii_s2_1d>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@f0000 {
+ phy-handle = <&phy_xaui_slot3>;
+ phy-connection-type = "xgmii";
+ };
+
+ ethernet@f2000 {
+ phy-handle = <&phy_sgmii_s3_1f>;
+ phy-connection-type = "xgmii";
+ };
+
+ mdio@fd000 {
+ phy_xaui_slot3: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x3>;
+ };
+ };
+ };
+};
+
+&boardctrl {
+ mdio-mux-emi1 {
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&mdio0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x54 1>;
+ mux-mask = <0xe0>;
+
+ t2080mdio0: mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ rgmii_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ };
+
+ t2080mdio1: mdio@20 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x20>;
+
+ rgmii_phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ };
+
+ t2080mdio2: mdio@40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40>;
+ status = "disabled";
+
+ phy_sgmii_s1_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_s1_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_s1_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_s1_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ t2080mdio3: mdio@c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xc0>;
+
+ phy_sgmii_s2_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_s2_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_s2_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_s2_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ t2080mdio4: mdio@60 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x60>;
+ status = "disabled";
+
+ phy_sgmii_s3_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_s3_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_s3_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_s3_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+ };
+};
+
/include/ "t2080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t2080rdb.dts b/arch/powerpc/boot/dts/fsl/t2080rdb.dts
index 33205bf..836e4c9 100644
--- a/arch/powerpc/boot/dts/fsl/t2080rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t2080rdb.dts
@@ -1,7 +1,7 @@
/*
* T2080PCIe-RDB Board Device Tree Source
*
- * Copyright 2014 Freescale Semiconductor Inc.
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -54,4 +54,69 @@
};
};
+&soc {
+ fman@400000 {
+ ethernet@e0000 {
+ phy-handle = <&xg_aq1202_phy3>;
+ phy-connection-type = "xgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&xg_aq1202_phy4>;
+ phy-connection-type = "xgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@f0000 {
+ phy-handle = <&xg_cs4315_phy1>;
+ phy-connection-type = "xgmii";
+ };
+
+ ethernet@f2000 {
+ phy-handle = <&xg_cs4315_phy2>;
+ phy-connection-type = "xgmii";
+ };
+
+ mdio@fc000 {
+ rgmii_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ rgmii_phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ };
+
+ mdio@fd000 {
+ xg_cs4315_phy1: ethernet-phy@c {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0xc>;
+ };
+
+ xg_cs4315_phy2: ethernet-phy@d {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0xd>;
+ };
+
+ xg_aq1202_phy3: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ };
+
+ xg_aq1202_phy4: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x1>;
+ };
+ };
+ };
+};
+
/include/ "t2080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t2081qds.dts b/arch/powerpc/boot/dts/fsl/t2081qds.dts
index b812135..fc5c4a3 100644
--- a/arch/powerpc/boot/dts/fsl/t2081qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t2081qds.dts
@@ -1,7 +1,7 @@
/*
* T2081QDS Device Tree Source
*
- * Copyright 2013 Freescale Semiconductor Inc.
+ * Copyright 2013 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,225 @@
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
+
+ aliases {
+ emi1_slot1 = &t2081mdio2;
+ emi1_slot2 = &t2081mdio3;
+ emi1_slot3 = &t2081mdio4;
+ emi1_slot5 = &t2081mdio5;
+ emi1_slot6 = &t2081mdio6;
+ emi1_slot7 = &t2081mdio7;
+ };
+};
+
+&soc {
+ fman@400000 {
+ ethernet@e0000 {
+ phy-handle = <&phy_sgmii_s7_1c>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&phy_sgmii_s7_1d>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&phy_sgmii_s3_1c>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@ea000 {
+ phy-handle = <&phy_sgmii_s7_1f>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@f0000 {
+ phy-handle = <&phy_sgmii_s2_1c>;
+ phy-connection-type = "xgmii";
+ };
+
+ ethernet@f2000 {
+ phy-handle = <&phy_sgmii_s7_1e>;
+ phy-connection-type = "xgmii";
+ };
+ };
+};
+
+&boardctrl {
+ mdio-mux-emi1 {
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&mdio0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x54 1>;
+ mux-mask = <0xe0>;
+
+ t2081mdio0: mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ rgmii_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ };
+
+ t2081mdio1: mdio@20 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x20>;
+
+ rgmii_phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ };
+
+ t2081mdio2: mdio@40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40>;
+
+ phy_sgmii_s1_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_s1_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_s1_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_s1_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ t2081mdio3: mdio@60 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x60>;
+
+ phy_sgmii_s2_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_s2_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_s2_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_s2_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ t2081mdio4: mdio@80 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x80>;
+ status = "disabled";
+
+ phy_sgmii_s3_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_s3_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_s3_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_s3_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ t2081mdio5: mdio@a0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xa0>;
+ status = "disabled";
+
+ phy_sgmii_s5_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_s5_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_s5_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_s5_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ t2081mdio6: mdio@c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xc0>;
+ status = "disabled";
+
+ phy_sgmii_s6_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_s6_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_s6_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_s6_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ t2081mdio7: mdio@e0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xe0>;
+
+ phy_sgmii_s7_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_s7_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_s7_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_s7_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+ };
};
/include/ "t2081si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t208xqds.dtsi b/arch/powerpc/boot/dts/fsl/t208xqds.dtsi
index 869f915..ec080bd 100644
--- a/arch/powerpc/boot/dts/fsl/t208xqds.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t208xqds.dtsi
@@ -112,7 +112,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,n25q128a11"; /* 16MB */
+ compatible = "micron,n25q128a11", "jedec,spi-nor"; /* 16MB */
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
};
@@ -120,7 +120,7 @@
flash@1 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "sst,sst25wf040";
+ compatible = "sst,sst25wf040", "jedec,spi-nor";
reg = <1>;
spi-max-frequency = <35000000>;
};
@@ -128,7 +128,7 @@
flash@2 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "eon,en25s64";
+ compatible = "eon,en25s64", "jedec,spi-nor";
reg = <2>;
spi-max-frequency = <35000000>;
};
diff --git a/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi
index 693d2a8..dc93268 100644
--- a/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi
@@ -113,7 +113,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,n25q512a";
+ compatible = "micron,n25q512a", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>; /* input clock */
};
diff --git a/arch/powerpc/boot/dts/fsl/t4240qds.dts b/arch/powerpc/boot/dts/fsl/t4240qds.dts
index c067a65..9573cea 100644
--- a/arch/powerpc/boot/dts/fsl/t4240qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t4240qds.dts
@@ -1,7 +1,7 @@
/*
* T4240QDS Device Tree Source
*
- * Copyright 2012 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,44 @@
#size-cells = <2>;
interrupt-parent = <&mpic>;
+ aliases{
+ phy_rgmii1 = &phyrgmii1;
+ phy_rgmii2 = &phyrgmii2;
+ phy_sgmii3 = &phy3;
+ phy_sgmii4 = &phy4;
+ phy_sgmii11 = &phy11;
+ phy_sgmii12 = &phy12;
+ sgmii_phy11 = &sgmiiphy11;
+ sgmii_phy12 = &sgmiiphy12;
+ sgmii_phy13 = &sgmiiphy13;
+ sgmii_phy14 = &sgmiiphy14;
+ sgmii_phy21 = &sgmiiphy21;
+ sgmii_phy22 = &sgmiiphy22;
+ sgmii_phy23 = &sgmiiphy23;
+ sgmii_phy24 = &sgmiiphy24;
+ sgmii_phy31 = &sgmiiphy31;
+ sgmii_phy32 = &sgmiiphy32;
+ sgmii_phy33 = &sgmiiphy33;
+ sgmii_phy34 = &sgmiiphy34;
+ sgmii_phy41 = &sgmiiphy41;
+ sgmii_phy42 = &sgmiiphy42;
+ sgmii_phy43 = &sgmiiphy43;
+ sgmii_phy44 = &sgmiiphy44;
+ phy_xfi1 = &xfiphy1;
+ phy_xfi2 = &xfiphy2;
+ phy_xfi3 = &xfiphy3;
+ phy_xfi4 = &xfiphy4;
+ xfi_pcs_mdio1 = &xfimdio0;
+ xfi_pcs_mdio2 = &xfimdio1;
+ xfi_pcs_mdio3 = &xfimdio2;
+ xfi_pcs_mdio4 = &xfimdio3;
+ emi1_rgmii = &t4240mdio0;
+ emi1_slot1 = &t4240mdio1;
+ emi1_slot2 = &t4240mdio2;
+ emi1_slot3 = &t4240mdio3;
+ emi1_slot4 = &t4240mdio4;
+ };
+
ifc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x2000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
@@ -91,8 +129,190 @@
};
board-control@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "fsl,t4240qds-fpga", "fsl,fpga-qixis";
reg = <3 0 0x300>;
+ ranges = <0 3 0 0x300>;
+
+ mdio-mux-emi1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&mdio1>;
+ reg = <0x54 1>;
+ mux-mask = <0xe0>;
+
+ t4240mdio0: mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ phyrgmii1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+
+ phyrgmii2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ };
+
+ t4240mdio1: mdio@20 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x20>;
+ status = "disabled";
+
+ phy1: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+
+ phy2: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+
+ phy3: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+
+ phy4: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+
+ sgmiiphy11: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ sgmiiphy12: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ sgmiiphy13: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ sgmiiphy14: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ t4240mdio2: mdio@40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40>;
+ status = "disabled";
+
+ phy5: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+
+ phy6: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+
+ phy7: ethernet-phy@6 {
+ reg = <0x6>;
+ };
+
+ phy8: ethernet-phy@7 {
+ reg = <0x7>;
+ };
+
+ sgmiiphy21: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ sgmiiphy22: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ sgmiiphy23: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ sgmiiphy24: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ t4240mdio3: mdio@60 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x60>;
+ status = "disabled";
+
+ phy9: ethernet-phy@8 {
+ reg = <0x8>;
+ };
+
+ phy10: ethernet-phy@9 {
+ reg = <0x9>;
+ };
+
+ phy11: ethernet-phy@a {
+ reg = <0xa>;
+ };
+
+ phy12: ethernet-phy@b {
+ reg = <0xb>;
+ };
+
+ sgmiiphy31: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ sgmiiphy32: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ sgmiiphy33: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ sgmiiphy34: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ t4240mdio4: mdio@80 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x80>;
+ status = "disabled";
+
+ phy13: ethernet-phy@c {
+ reg = <0xc>;
+ };
+
+ phy14: ethernet-phy@d {
+ reg = <0xd>;
+ };
+
+ phy15: ethernet-phy@e {
+ reg = <0xe>;
+ };
+
+ phy16: ethernet-phy@f {
+ reg = <0xf>;
+ };
+
+ sgmiiphy41: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ sgmiiphy42: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ sgmiiphy43: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ sgmiiphy44: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+ };
};
};
@@ -138,7 +358,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "sst,sst25wf040";
+ compatible = "sst,sst25wf040", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
};
@@ -234,6 +454,184 @@
sdhc@114000 {
voltage-ranges = <1800 1800 3300 3300>;
};
+
+ fman@400000 {
+ port@83000 {
+ status = "disabled";
+ };
+
+ port@84000 {
+ status = "disabled";
+ };
+
+ port@85000 {
+ status = "disabled";
+ };
+
+ port@86000 {
+ status = "disabled";
+ };
+
+ port@87000 {
+ status = "disabled";
+ };
+
+ ethernet@e0000 {
+ phy-handle = <&phy5>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&phy6>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&phy7>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&phy8>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&phyrgmii2>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@ea000 {
+ phy-handle = <&phy2>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@f0000 {
+ phy-handle = <&xauiphy1>;
+ phy-connection-type = "xgmii";
+ };
+
+ ethernet@f2000 {
+ phy-handle = <&xauiphy2>;
+ phy-connection-type = "xgmii";
+ };
+
+ xfimdio0: mdio@f1000 {
+ status = "disabled";
+
+ xfiphy1: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ };
+ };
+
+ xfimdio1: mdio@f3000 {
+ status = "disabled";
+
+ xfiphy2: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ };
+ };
+ };
+
+ fman@500000 {
+ port@84000 {
+ status = "disabled";
+ };
+
+ port@85000 {
+ status = "disabled";
+ };
+
+ port@86000 {
+ status = "disabled";
+ };
+
+ port@87000 {
+ status = "disabled";
+ };
+
+ ethernet@e0000 {
+ phy-handle = <&phy13>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&phy14>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&phy15>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&phy16>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&phyrgmii1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@ea000 {
+ phy-handle = <&phy10>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@f0000 {
+ phy-handle = <&xauiphy3>;
+ phy-connection-type = "xgmii";
+ };
+
+ ethernet@f2000 {
+ phy-handle = <&xauiphy4>;
+ phy-connection-type = "xgmii";
+ };
+
+ xfimdio2: mdio@f1000 {
+ status = "disabled";
+
+ xfiphy3: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ };
+ };
+
+ xfimdio3: mdio@f3000 {
+ status = "disabled";
+
+ xfiphy4: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ };
+ };
+
+ mdio@fd000 {
+ xauiphy1: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ };
+
+ xauiphy2: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x1>;
+ };
+
+ xauiphy3: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x2>;
+ };
+
+ xauiphy4: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x3>;
+ };
+ };
+ };
};
pci0: pcie@ffe240000 {
diff --git a/arch/powerpc/boot/dts/fsl/t4240rdb.dts b/arch/powerpc/boot/dts/fsl/t4240rdb.dts
index 6e820a8..cc0a264 100644
--- a/arch/powerpc/boot/dts/fsl/t4240rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t4240rdb.dts
@@ -1,7 +1,7 @@
/*
* T4240RDB Device Tree Source
*
- * Copyright 2014 Freescale Semiconductor Inc.
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,17 @@
#size-cells = <2>;
interrupt-parent = <&mpic>;
+ aliases {
+ sgmii_phy21 = &sgmiiphy21;
+ sgmii_phy22 = &sgmiiphy22;
+ sgmii_phy23 = &sgmiiphy23;
+ sgmii_phy24 = &sgmiiphy24;
+ sgmii_phy41 = &sgmiiphy41;
+ sgmii_phy42 = &sgmiiphy42;
+ sgmii_phy43 = &sgmiiphy43;
+ sgmii_phy44 = &sgmiiphy44;
+ };
+
ifc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x2000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
@@ -107,7 +118,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "sst,sst25wf040";
+ compatible = "sst,sst25wf040", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
};
@@ -136,6 +147,142 @@
sdhc@114000 {
voltage-ranges = <1800 1800 3300 3300>;
};
+
+ fman@400000 {
+ ethernet@e0000 {
+ phy-handle = <&sgmiiphy21>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&sgmiiphy22>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&sgmiiphy23>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&sgmiiphy24>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e8000 {
+ status = "disabled";
+ };
+
+ ethernet@ea000 {
+ status = "disabled";
+ };
+
+ ethernet@f0000 {
+ phy-handle = <&xfiphy1>;
+ phy-connection-type = "xgmii";
+ };
+
+ ethernet@f2000 {
+ phy-handle = <&xfiphy2>;
+ phy-connection-type = "xgmii";
+ };
+ };
+
+ fman@500000 {
+ ethernet@e0000 {
+ phy-handle = <&sgmiiphy41>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&sgmiiphy42>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&sgmiiphy43>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&sgmiiphy44>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e8000 {
+ status = "disabled";
+ };
+
+ ethernet@ea000 {
+ status = "disabled";
+ };
+
+ ethernet@f0000 {
+ phy-handle = <&xfiphy3>;
+ phy-connection-type = "xgmii";
+ };
+
+ ethernet@f2000 {
+ phy-handle = <&xfiphy4>;
+ phy-connection-type = "xgmii";
+ };
+
+ mdio@fc000 {
+ sgmiiphy21: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+
+ sgmiiphy22: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+
+ sgmiiphy23: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+
+ sgmiiphy24: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+
+ sgmiiphy41: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+
+ sgmiiphy42: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+
+ sgmiiphy43: ethernet-phy@6 {
+ reg = <0x6>;
+ };
+
+ sgmiiphy44: ethernet-phy@7 {
+ reg = <0x7>;
+ };
+ };
+
+ mdio@fd000 {
+ xfiphy1: ethernet-phy@10 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x10>;
+ };
+
+ xfiphy2: ethernet-phy@11 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x11>;
+ };
+
+ xfiphy3: ethernet-phy@13 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x13>;
+ };
+
+ xfiphy4: ethernet-phy@12 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x12>;
+ };
+ };
+ };
};
pci0: pcie@ffe240000 {
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
deleted file mode 100644
index 83eb0fd..0000000
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ /dev/null
@@ -1,425 +0,0 @@
-/*
- * GE PPC9A Device Tree Source
- *
- * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Based on: SBS CM6 Device Tree Source
- * Copyright 2007 SBS Technologies GmbH & Co. KG
- * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
- * Copyright 2006 Freescale Semiconductor Inc.
- */
-
-/*
- * Compiled with dtc -I dts -O dtb -o gef_ppc9a.dtb gef_ppc9a.dts
- */
-
-/dts-v1/;
-
-/ {
- model = "GEF_PPC9A";
- compatible = "gef,ppc9a";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8641@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <32768>; // L1, 32K
- i-cache-size = <32768>; // L1, 32K
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- PowerPC,8641@1 {
- device_type = "cpu";
- reg = <1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <32768>; // L1, 32K
- i-cache-size = <32768>; // L1, 32K
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x0 0x40000000>; // set by uboot
- };
-
- localbus@fef05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-localbus", "simple-bus";
- reg = <0xfef05000 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
-
- ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
- 1 0 0xe8000000 0x08000000 // Paged Flash 0
- 2 0 0xe0000000 0x08000000 // Paged Flash 1
- 3 0 0xfc100000 0x00020000 // NVRAM
- 4 0 0xfc000000 0x00008000 // FPGA
- 5 0 0xfc008000 0x00008000 // AFIX FPGA
- 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit)
- 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit)
-
- /* flash@0,0 is a mirror of part of the memory in flash@1,0
- flash@0,0 {
- compatible = "gef,ppc9a-firmware-mirror", "cfi-flash";
- reg = <0x0 0x0 0x1000000>;
- bank-width = <4>;
- device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "firmware";
- reg = <0x0 0x1000000>;
- read-only;
- };
- };
- */
-
- flash@1,0 {
- compatible = "gef,ppc9a-paged-flash", "cfi-flash";
- reg = <0x1 0x0 0x8000000>;
- bank-width = <4>;
- device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "user";
- reg = <0x0 0x7800000>;
- };
- partition@7800000 {
- label = "firmware";
- reg = <0x7800000 0x800000>;
- read-only;
- };
- };
-
- nvram@3,0 {
- device_type = "nvram";
- compatible = "simtek,stk14ca8";
- reg = <0x3 0x0 0x20000>;
- };
-
- fpga@4,0 {
- compatible = "gef,ppc9a-fpga-regs";
- reg = <0x4 0x0 0x40>;
- };
-
- wdt@4,2000 {
- compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
- "gef,fpga-wdt";
- reg = <0x4 0x2000 0x8>;
- interrupts = <0x1a 0x4>;
- interrupt-parent = <&gef_pic>;
- };
- /* Second watchdog available, driver currently supports one.
- wdt@4,2010 {
- compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
- "gef,fpga-wdt";
- reg = <0x4 0x2010 0x8>;
- interrupts = <0x1b 0x4>;
- interrupt-parent = <&gef_pic>;
- };
- */
- gef_pic: pic@4,4000 {
- #interrupt-cells = <1>;
- interrupt-controller;
- compatible = "gef,ppc9a-fpga-pic", "gef,fpga-pic-1.00";
- reg = <0x4 0x4000 0x20>;
- interrupts = <0x8
- 0x9>;
- interrupt-parent = <&mpic>;
-
- };
- gef_gpio: gpio@7,14000 {
- #gpio-cells = <2>;
- compatible = "gef,ppc9a-gpio", "gef,sbc610-gpio";
- reg = <0x7 0x14000 0x24>;
- gpio-controller;
- };
- };
-
- soc@fef00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- #interrupt-cells = <2>;
- device_type = "soc";
- compatible = "fsl,mpc8641-soc", "simple-bus";
- ranges = <0x0 0xfef00000 0x00100000>;
- bus-frequency = <33333333>;
-
- mcm-law@0 {
- compatible = "fsl,mcm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- mcm@1000 {
- compatible = "fsl,mpc8641-mcm", "fsl,mcm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- i2c1: i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
-
- hwmon@48 {
- compatible = "national,lm92";
- reg = <0x48>;
- };
-
- hwmon@4c {
- compatible = "adi,adt7461";
- reg = <0x4c>;
- };
-
- rtc@51 {
- compatible = "epson,rx8581";
- reg = <0x00000051>;
- };
-
- eti@6b {
- compatible = "dallas,ds1682";
- reg = <0x6b>;
- };
- };
-
- i2c2: i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "gmii";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x9 0x4>;
- reg = <1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x8 0x4>;
- reg = <3>;
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "gmii";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <0x2a 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <0x1c 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 {
- compatible = "fsl,mpc8641-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@fef08000 {
- compatible = "fsl,mpc8641-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xfef08000 0x1000>;
- bus-range = <0x0 0xff>;
- ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
- 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <0x18 0x2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x02000000 0x0 0x80000000
- 0x02000000 0x0 0x80000000
- 0x0 0x40000000
-
- 0x01000000 0x0 0x00000000
- 0x01000000 0x0 0x00000000
- 0x0 0x00400000>;
- };
- };
-};
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
deleted file mode 100644
index d426dd3d..0000000
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ /dev/null
@@ -1,459 +0,0 @@
-/*
- * GE SBC310 Device Tree Source
- *
- * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Based on: SBS CM6 Device Tree Source
- * Copyright 2007 SBS Technologies GmbH & Co. KG
- * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
- * Copyright 2006 Freescale Semiconductor Inc.
- */
-
-/*
- * Compiled with dtc -I dts -O dtb -o gef_sbc310.dtb gef_sbc310.dts
- */
-
-/dts-v1/;
-
-/ {
- model = "GEF_SBC310";
- compatible = "gef,sbc310";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8641@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <32768>; // L1, 32K
- i-cache-size = <32768>; // L1, 32K
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- PowerPC,8641@1 {
- device_type = "cpu";
- reg = <1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <32768>; // L1, 32K
- i-cache-size = <32768>; // L1, 32K
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x0 0x40000000>; // set by uboot
- };
-
- localbus@fef05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-localbus", "simple-bus";
- reg = <0xfef05000 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
-
- ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
- 1 0 0xe0000000 0x08000000 // Paged Flash 0
- 2 0 0xe8000000 0x08000000 // Paged Flash 1
- 3 0 0xfc100000 0x00020000 // NVRAM
- 4 0 0xfc000000 0x00010000>; // FPGA
-
- /* flash@0,0 is a mirror of part of the memory in flash@1,0
- flash@0,0 {
- compatible = "gef,sbc310-firmware-mirror", "cfi-flash";
- reg = <0x0 0x0 0x01000000>;
- bank-width = <2>;
- device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "firmware";
- reg = <0x0 0x01000000>;
- read-only;
- };
- };
- */
-
- flash@1,0 {
- compatible = "gef,sbc310-paged-flash", "cfi-flash";
- reg = <0x1 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "user";
- reg = <0x0 0x7800000>;
- };
- partition@7800000 {
- label = "firmware";
- reg = <0x7800000 0x800000>;
- read-only;
- };
- };
-
- nvram@3,0 {
- device_type = "nvram";
- compatible = "simtek,stk14ca8";
- reg = <0x3 0x0 0x20000>;
- };
-
- fpga@4,0 {
- compatible = "gef,fpga-regs";
- reg = <0x4 0x0 0x40>;
- };
-
- wdt@4,2000 {
- compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
- "gef,fpga-wdt";
- reg = <0x4 0x2000 0x8>;
- interrupts = <0x1a 0x4>;
- interrupt-parent = <&gef_pic>;
- };
-/*
- wdt@4,2010 {
- compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
- "gef,fpga-wdt";
- reg = <0x4 0x2010 0x8>;
- interrupts = <0x1b 0x4>;
- interrupt-parent = <&gef_pic>;
- };
-*/
- gef_pic: pic@4,4000 {
- #interrupt-cells = <1>;
- interrupt-controller;
- compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic";
- reg = <0x4 0x4000 0x20>;
- interrupts = <0x8
- 0x9>;
- interrupt-parent = <&mpic>;
-
- };
- gef_gpio: gpio@4,8000 {
- #gpio-cells = <2>;
- compatible = "gef,sbc310-gpio";
- reg = <0x4 0x8000 0x24>;
- gpio-controller;
- };
- };
-
- soc@fef00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- #interrupt-cells = <2>;
- device_type = "soc";
- compatible = "fsl,mpc8641-soc", "simple-bus";
- ranges = <0x0 0xfef00000 0x00100000>;
- bus-frequency = <33333333>;
-
- mcm-law@0 {
- compatible = "fsl,mcm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- mcm@1000 {
- compatible = "fsl,mpc8641-mcm", "fsl,mcm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- i2c1: i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
-
- rtc@51 {
- compatible = "epson,rx8581";
- reg = <0x00000051>;
- };
- };
-
- i2c2: i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
-
- hwmon@48 {
- compatible = "national,lm92";
- reg = <0x48>;
- };
-
- hwmon@4c {
- compatible = "adi,adt7461";
- reg = <0x4c>;
- };
-
- eti@6b {
- compatible = "dallas,ds1682";
- reg = <0x6b>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "gmii";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x9 0x4>;
- reg = <1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x8 0x4>;
- reg = <3>;
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "gmii";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <0x2a 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <0x1c 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 {
- compatible = "fsl,mpc8641-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@fef08000 {
- compatible = "fsl,mpc8641-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xfef08000 0x1000>;
- bus-range = <0x0 0xff>;
- ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
- 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <0x18 0x2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
- 0x0000 0x0 0x0 0x1 &mpic 0x0 0x2
- 0x0000 0x0 0x0 0x2 &mpic 0x1 0x2
- 0x0000 0x0 0x0 0x3 &mpic 0x2 0x2
- 0x0000 0x0 0x0 0x4 &mpic 0x3 0x2
- >;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x02000000 0x0 0x80000000
- 0x02000000 0x0 0x80000000
- 0x0 0x40000000
-
- 0x01000000 0x0 0x00000000
- 0x01000000 0x0 0x00000000
- 0x0 0x00400000>;
- };
- };
-
- pci1: pcie@fef09000 {
- compatible = "fsl,mpc8641-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xfef09000 0x1000>;
- bus-range = <0x0 0xff>;
- ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
- 0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <0x19 0x2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- 0x0000 0x0 0x0 0x1 &mpic 0x4 0x2
- 0x0000 0x0 0x0 0x2 &mpic 0x5 0x2
- 0x0000 0x0 0x0 0x3 &mpic 0x6 0x2
- 0x0000 0x0 0x0 0x4 &mpic 0x7 0x2
- >;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x02000000 0x0 0xc0000000
- 0x02000000 0x0 0xc0000000
- 0x0 0x20000000
-
- 0x01000000 0x0 0x00000000
- 0x01000000 0x0 0x00000000
- 0x0 0x00400000>;
- };
- };
-};
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
deleted file mode 100644
index 5db3399..0000000
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ /dev/null
@@ -1,423 +0,0 @@
-/*
- * GE SBC610 Device Tree Source
- *
- * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Based on: SBS CM6 Device Tree Source
- * Copyright 2007 SBS Technologies GmbH & Co. KG
- * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
- * Copyright 2006 Freescale Semiconductor Inc.
- */
-
-/*
- * Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts
- */
-
-/dts-v1/;
-
-/ {
- model = "GEF_SBC610";
- compatible = "gef,sbc610";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8641@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <32768>; // L1, 32K
- i-cache-size = <32768>; // L1, 32K
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- PowerPC,8641@1 {
- device_type = "cpu";
- reg = <1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <32768>; // L1, 32K
- i-cache-size = <32768>; // L1, 32K
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x0 0x40000000>; // set by uboot
- };
-
- localbus@fef05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-localbus", "simple-bus";
- reg = <0xfef05000 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
-
- ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
- 1 0 0xe8000000 0x08000000 // Paged Flash 0
- 2 0 0xe0000000 0x08000000 // Paged Flash 1
- 3 0 0xfc100000 0x00020000 // NVRAM
- 4 0 0xfc000000 0x00008000 // FPGA
- 5 0 0xfc008000 0x00008000 // AFIX FPGA
- 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit)
- 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit)
-
- /* flash@0,0 is a mirror of part of the memory in flash@1,0
- flash@0,0 {
- compatible = "gef,sbc610-firmware-mirror", "cfi-flash";
- reg = <0x0 0x0 0x1000000>;
- bank-width = <4>;
- device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "firmware";
- reg = <0x0 0x1000000>;
- read-only;
- };
- };
- */
-
- flash@1,0 {
- compatible = "gef,sbc610-paged-flash", "cfi-flash";
- reg = <0x1 0x0 0x8000000>;
- bank-width = <4>;
- device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "user";
- reg = <0x0 0x7800000>;
- };
- partition@7800000 {
- label = "firmware";
- reg = <0x7800000 0x800000>;
- read-only;
- };
- };
-
- nvram@3,0 {
- device_type = "nvram";
- compatible = "simtek,stk14ca8";
- reg = <0x3 0x0 0x20000>;
- };
-
- fpga@4,0 {
- compatible = "gef,fpga-regs";
- reg = <0x4 0x0 0x40>;
- };
-
- wdt@4,2000 {
- compatible = "gef,fpga-wdt";
- reg = <0x4 0x2000 0x8>;
- interrupts = <0x1a 0x4>;
- interrupt-parent = <&gef_pic>;
- };
- /* Second watchdog available, driver currently supports one.
- wdt@4,2010 {
- compatible = "gef,fpga-wdt";
- reg = <0x4 0x2010 0x8>;
- interrupts = <0x1b 0x4>;
- interrupt-parent = <&gef_pic>;
- };
- */
- gef_pic: pic@4,4000 {
- #interrupt-cells = <1>;
- interrupt-controller;
- compatible = "gef,fpga-pic";
- reg = <0x4 0x4000 0x20>;
- interrupts = <0x8
- 0x9>;
- interrupt-parent = <&mpic>;
-
- };
- gef_gpio: gpio@7,14000 {
- #gpio-cells = <2>;
- compatible = "gef,sbc610-gpio";
- reg = <0x7 0x14000 0x24>;
- gpio-controller;
- };
- };
-
- soc@fef00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- #interrupt-cells = <2>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xfef00000 0x00100000>;
- bus-frequency = <33333333>;
-
- mcm-law@0 {
- compatible = "fsl,mcm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- mcm@1000 {
- compatible = "fsl,mpc8641-mcm", "fsl,mcm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- i2c1: i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
-
- hwmon@48 {
- compatible = "national,lm92";
- reg = <0x48>;
- };
-
- hwmon@4c {
- compatible = "adi,adt7461";
- reg = <0x4c>;
- };
-
- rtc@51 {
- compatible = "epson,rx8581";
- reg = <0x00000051>;
- };
-
- eti@6b {
- compatible = "dallas,ds1682";
- reg = <0x6b>;
- };
- };
-
- i2c2: i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "gmii";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x9 0x4>;
- reg = <1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x8 0x4>;
- reg = <3>;
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "gmii";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <0x2a 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <0x1c 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 {
- compatible = "fsl,mpc8641-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@fef08000 {
- compatible = "fsl,mpc8641-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xfef08000 0x1000>;
- bus-range = <0x0 0xff>;
- ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
- 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <0x18 0x2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x02000000 0x0 0x80000000
- 0x02000000 0x0 0x80000000
- 0x0 0x40000000
-
- 0x01000000 0x0 0x00000000
- 0x01000000 0x0 0x00000000
- 0x0 0x00400000>;
- };
- };
-};
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
deleted file mode 100644
index 1c03060..0000000
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ /dev/null
@@ -1,663 +0,0 @@
-/*
- * MPC8641 HPCN Device Tree Source
- *
- * Copyright 2006 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
- model = "MPC8641HPCN";
- compatible = "fsl,mpc8641hpcn";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8641@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <32768>; // L1
- i-cache-size = <32768>; // L1
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- PowerPC,8641@1 {
- device_type = "cpu";
- reg = <1>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <32768>;
- i-cache-size = <32768>;
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x40000000>; // 1G at 0x0
- };
-
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-localbus", "simple-bus";
- reg = <0xffe05000 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
-
- ranges = <0 0 0xef800000 0x00800000
- 2 0 0xffdf8000 0x00008000
- 3 0 0xffdf0000 0x00008000>;
-
- flash@0,0 {
- compatible = "cfi-flash";
- reg = <0 0 0x00800000>;
- bank-width = <2>;
- device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "kernel";
- reg = <0x00000000 0x00300000>;
- };
- partition@300000 {
- label = "firmware b";
- reg = <0x00300000 0x00100000>;
- read-only;
- };
- partition@400000 {
- label = "fs";
- reg = <0x00400000 0x00300000>;
- };
- partition@700000 {
- label = "firmware a";
- reg = <0x00700000 0x00100000>;
- read-only;
- };
- };
- };
-
- soc8641@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xffe00000 0x00100000>;
- bus-frequency = <0>;
-
- mcm-law@0 {
- compatible = "fsl,mcm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- mcm@1000 {
- compatible = "fsl,mpc8641-mcm", "fsl,mcm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <3>;
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi3>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <28 2>;
- interrupt-parent = <&mpic>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- rmu: rmu@d3000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,srio-rmu";
- reg = <0xd3000 0x500>;
- ranges = <0x0 0xd3000 0x500>;
-
- message-unit@0 {
- compatible = "fsl,srio-msg-unit";
- reg = <0x0 0x100>;
- interrupts = <
- 53 2 /* msg1_tx_irq */
- 54 2>;/* msg1_rx_irq */
- };
- message-unit@100 {
- compatible = "fsl,srio-msg-unit";
- reg = <0x100 0x100>;
- interrupts = <
- 55 2 /* msg2_tx_irq */
- 56 2>;/* msg2_rx_irq */
- };
- doorbell-unit@400 {
- compatible = "fsl,srio-dbell-unit";
- reg = <0x400 0x80>;
- interrupts = <
- 49 2 /* bell_outb_irq */
- 50 2>;/* bell_inb_irq */
- };
- port-write-unit@4e0 {
- compatible = "fsl,srio-port-write-unit";
- reg = <0x4e0 0x20>;
- interrupts = <48 2>;
- };
- };
-
- global-utilities@e0000 {
- compatible = "fsl,mpc8641-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@ffe08000 {
- compatible = "fsl,mpc8641-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xffe08000 0x1000>;
- bus-range = <0x0 0xff>;
- ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x11 func 0 - PCI slot 1 */
- 0x8800 0 0 1 &mpic 2 1
- 0x8800 0 0 2 &mpic 3 1
- 0x8800 0 0 3 &mpic 4 1
- 0x8800 0 0 4 &mpic 1 1
-
- /* IDSEL 0x11 func 1 - PCI slot 1 */
- 0x8900 0 0 1 &mpic 2 1
- 0x8900 0 0 2 &mpic 3 1
- 0x8900 0 0 3 &mpic 4 1
- 0x8900 0 0 4 &mpic 1 1
-
- /* IDSEL 0x11 func 2 - PCI slot 1 */
- 0x8a00 0 0 1 &mpic 2 1
- 0x8a00 0 0 2 &mpic 3 1
- 0x8a00 0 0 3 &mpic 4 1
- 0x8a00 0 0 4 &mpic 1 1
-
- /* IDSEL 0x11 func 3 - PCI slot 1 */
- 0x8b00 0 0 1 &mpic 2 1
- 0x8b00 0 0 2 &mpic 3 1
- 0x8b00 0 0 3 &mpic 4 1
- 0x8b00 0 0 4 &mpic 1 1
-
- /* IDSEL 0x11 func 4 - PCI slot 1 */
- 0x8c00 0 0 1 &mpic 2 1
- 0x8c00 0 0 2 &mpic 3 1
- 0x8c00 0 0 3 &mpic 4 1
- 0x8c00 0 0 4 &mpic 1 1
-
- /* IDSEL 0x11 func 5 - PCI slot 1 */
- 0x8d00 0 0 1 &mpic 2 1
- 0x8d00 0 0 2 &mpic 3 1
- 0x8d00 0 0 3 &mpic 4 1
- 0x8d00 0 0 4 &mpic 1 1
-
- /* IDSEL 0x11 func 6 - PCI slot 1 */
- 0x8e00 0 0 1 &mpic 2 1
- 0x8e00 0 0 2 &mpic 3 1
- 0x8e00 0 0 3 &mpic 4 1
- 0x8e00 0 0 4 &mpic 1 1
-
- /* IDSEL 0x11 func 7 - PCI slot 1 */
- 0x8f00 0 0 1 &mpic 2 1
- 0x8f00 0 0 2 &mpic 3 1
- 0x8f00 0 0 3 &mpic 4 1
- 0x8f00 0 0 4 &mpic 1 1
-
- /* IDSEL 0x12 func 0 - PCI slot 2 */
- 0x9000 0 0 1 &mpic 3 1
- 0x9000 0 0 2 &mpic 4 1
- 0x9000 0 0 3 &mpic 1 1
- 0x9000 0 0 4 &mpic 2 1
-
- /* IDSEL 0x12 func 1 - PCI slot 2 */
- 0x9100 0 0 1 &mpic 3 1
- 0x9100 0 0 2 &mpic 4 1
- 0x9100 0 0 3 &mpic 1 1
- 0x9100 0 0 4 &mpic 2 1
-
- /* IDSEL 0x12 func 2 - PCI slot 2 */
- 0x9200 0 0 1 &mpic 3 1
- 0x9200 0 0 2 &mpic 4 1
- 0x9200 0 0 3 &mpic 1 1
- 0x9200 0 0 4 &mpic 2 1
-
- /* IDSEL 0x12 func 3 - PCI slot 2 */
- 0x9300 0 0 1 &mpic 3 1
- 0x9300 0 0 2 &mpic 4 1
- 0x9300 0 0 3 &mpic 1 1
- 0x9300 0 0 4 &mpic 2 1
-
- /* IDSEL 0x12 func 4 - PCI slot 2 */
- 0x9400 0 0 1 &mpic 3 1
- 0x9400 0 0 2 &mpic 4 1
- 0x9400 0 0 3 &mpic 1 1
- 0x9400 0 0 4 &mpic 2 1
-
- /* IDSEL 0x12 func 5 - PCI slot 2 */
- 0x9500 0 0 1 &mpic 3 1
- 0x9500 0 0 2 &mpic 4 1
- 0x9500 0 0 3 &mpic 1 1
- 0x9500 0 0 4 &mpic 2 1
-
- /* IDSEL 0x12 func 6 - PCI slot 2 */
- 0x9600 0 0 1 &mpic 3 1
- 0x9600 0 0 2 &mpic 4 1
- 0x9600 0 0 3 &mpic 1 1
- 0x9600 0 0 4 &mpic 2 1
-
- /* IDSEL 0x12 func 7 - PCI slot 2 */
- 0x9700 0 0 1 &mpic 3 1
- 0x9700 0 0 2 &mpic 4 1
- 0x9700 0 0 3 &mpic 1 1
- 0x9700 0 0 4 &mpic 2 1
-
- // IDSEL 0x1c USB
- 0xe000 0 0 1 &i8259 12 2
- 0xe100 0 0 2 &i8259 9 2
- 0xe200 0 0 3 &i8259 10 2
- 0xe300 0 0 4 &i8259 11 2
-
- // IDSEL 0x1d Audio
- 0xe800 0 0 1 &i8259 6 2
-
- // IDSEL 0x1e Legacy
- 0xf000 0 0 1 &i8259 7 2
- 0xf100 0 0 1 &i8259 7 2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0 0 1 &i8259 14 2
- 0xf900 0 0 1 &i8259 5 2
- >;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x02000000 0x0 0x80000000
- 0x02000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x01000000 0x0 0x00000000
- 0x01000000 0x0 0x00000000
- 0x0 0x00010000>;
- uli1575@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x02000000 0x0 0x80000000
- 0x02000000 0x0 0x80000000
- 0x0 0x20000000
- 0x01000000 0x0 0x00000000
- 0x01000000 0x0 0x00000000
- 0x0 0x00010000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0 0 0 0>;
- ranges = <1 0 0x01000000 0 0
- 0x00001000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <1 0x20 2
- 1 0xa0 2
- 1 0x4d0 2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <1 0x60 1 1 0x64 1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible =
- "pnpPNP,b00";
- reg = <1 0x70 2>;
- };
-
- gpio@400 {
- reg = <1 0x400 0x80>;
- };
- };
- };
- };
-
- };
-
- pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8641-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xffe09000 0x1000>;
- bus-range = <0 0xff>;
- ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
- 0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0x0000 0 0 1 &mpic 4 1
- 0x0000 0 0 2 &mpic 5 1
- 0x0000 0 0 3 &mpic 6 1
- 0x0000 0 0 4 &mpic 7 1
- >;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x02000000 0x0 0xa0000000
- 0x02000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x01000000 0x0 0x00000000
- 0x01000000 0x0 0x00000000
- 0x0 0x00010000>;
- };
- };
-/*
- * Only one of Rapid IO or PCI can be present due to HW limitations and
- * due to the fact that the 2 now share address space in the new memory
- * map. The most likely case is that we have PCI, so comment out the
- * rapidio node. Leave it here for reference.
-
- rapidio@ffec0000 {
- reg = <0xffec0000 0x11000>;
- compatible = "fsl,srio";
- interrupt-parent = <&mpic>;
- interrupts = <48 2>;
- #address-cells = <2>;
- #size-cells = <2>;
- fsl,srio-rmu-handle = <&rmu>;
- ranges;
-
- port1 {
- #address-cells = <2>;
- #size-cells = <2>;
- cell-index = <1>;
- ranges = <0 0 0x80000000 0 0x20000000>;
- };
- };
-*/
-
-};
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
deleted file mode 100644
index bb575e2..0000000
--- a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
+++ /dev/null
@@ -1,605 +0,0 @@
-/*
- * MPC8641 HPCN Device Tree Source
- *
- * Copyright 2008-2009 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
- model = "MPC8641HPCN";
- compatible = "fsl,mpc8641hpcn";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8641@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <32768>; // L1, 32K
- i-cache-size = <32768>; // L1, 32K
- timebase-frequency = <0>; // 33 MHz, from uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- PowerPC,8641@1 {
- device_type = "cpu";
- reg = <1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <32768>; // L1, 32K
- i-cache-size = <32768>; // L1, 32K
- timebase-frequency = <0>; // 33 MHz, from uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x0 0x00000000 0x0 0x40000000>; // 1G at 0x0
- };
-
- localbus@fffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-localbus", "simple-bus";
- reg = <0x0f 0xffe05000 0x0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
-
- ranges = <0 0 0xf 0xef800000 0x00800000
- 2 0 0xf 0xffdf8000 0x00008000
- 3 0 0xf 0xffdf0000 0x00008000>;
-
- flash@0,0 {
- compatible = "cfi-flash";
- reg = <0 0 0x00800000>;
- bank-width = <2>;
- device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "kernel";
- reg = <0x00000000 0x00300000>;
- };
- partition@300000 {
- label = "firmware b";
- reg = <0x00300000 0x00100000>;
- read-only;
- };
- partition@400000 {
- label = "fs";
- reg = <0x00400000 0x00300000>;
- };
- partition@700000 {
- label = "firmware a";
- reg = <0x00700000 0x00100000>;
- read-only;
- };
- };
- };
-
- soc8641@fffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0x0f 0xffe00000 0x00100000>;
- bus-frequency = <0>;
-
- mcm-law@0 {
- compatible = "fsl,mcm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- mcm@1000 {
- compatible = "fsl,mpc8641-mcm", "fsl,mcm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <3>;
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi3>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <28 2>;
- interrupt-parent = <&mpic>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- global-utilities@e0000 {
- compatible = "fsl,mpc8641-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@fffe08000 {
- cell-index = <0>;
- compatible = "fsl,mpc8641-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0x0f 0xffe08000 0x0 0x1000>;
- bus-range = <0x0 0xff>;
- ranges = <0x02000000 0x0 0xe0000000 0x0c 0x00000000 0x0 0x20000000
- 0x01000000 0x0 0x00000000 0x0f 0xffc00000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x11 func 0 - PCI slot 1 */
- 0x8800 0 0 1 &mpic 2 1
- 0x8800 0 0 2 &mpic 3 1
- 0x8800 0 0 3 &mpic 4 1
- 0x8800 0 0 4 &mpic 1 1
-
- /* IDSEL 0x11 func 1 - PCI slot 1 */
- 0x8900 0 0 1 &mpic 2 1
- 0x8900 0 0 2 &mpic 3 1
- 0x8900 0 0 3 &mpic 4 1
- 0x8900 0 0 4 &mpic 1 1
-
- /* IDSEL 0x11 func 2 - PCI slot 1 */
- 0x8a00 0 0 1 &mpic 2 1
- 0x8a00 0 0 2 &mpic 3 1
- 0x8a00 0 0 3 &mpic 4 1
- 0x8a00 0 0 4 &mpic 1 1
-
- /* IDSEL 0x11 func 3 - PCI slot 1 */
- 0x8b00 0 0 1 &mpic 2 1
- 0x8b00 0 0 2 &mpic 3 1
- 0x8b00 0 0 3 &mpic 4 1
- 0x8b00 0 0 4 &mpic 1 1
-
- /* IDSEL 0x11 func 4 - PCI slot 1 */
- 0x8c00 0 0 1 &mpic 2 1
- 0x8c00 0 0 2 &mpic 3 1
- 0x8c00 0 0 3 &mpic 4 1
- 0x8c00 0 0 4 &mpic 1 1
-
- /* IDSEL 0x11 func 5 - PCI slot 1 */
- 0x8d00 0 0 1 &mpic 2 1
- 0x8d00 0 0 2 &mpic 3 1
- 0x8d00 0 0 3 &mpic 4 1
- 0x8d00 0 0 4 &mpic 1 1
-
- /* IDSEL 0x11 func 6 - PCI slot 1 */
- 0x8e00 0 0 1 &mpic 2 1
- 0x8e00 0 0 2 &mpic 3 1
- 0x8e00 0 0 3 &mpic 4 1
- 0x8e00 0 0 4 &mpic 1 1
-
- /* IDSEL 0x11 func 7 - PCI slot 1 */
- 0x8f00 0 0 1 &mpic 2 1
- 0x8f00 0 0 2 &mpic 3 1
- 0x8f00 0 0 3 &mpic 4 1
- 0x8f00 0 0 4 &mpic 1 1
-
- /* IDSEL 0x12 func 0 - PCI slot 2 */
- 0x9000 0 0 1 &mpic 3 1
- 0x9000 0 0 2 &mpic 4 1
- 0x9000 0 0 3 &mpic 1 1
- 0x9000 0 0 4 &mpic 2 1
-
- /* IDSEL 0x12 func 1 - PCI slot 2 */
- 0x9100 0 0 1 &mpic 3 1
- 0x9100 0 0 2 &mpic 4 1
- 0x9100 0 0 3 &mpic 1 1
- 0x9100 0 0 4 &mpic 2 1
-
- /* IDSEL 0x12 func 2 - PCI slot 2 */
- 0x9200 0 0 1 &mpic 3 1
- 0x9200 0 0 2 &mpic 4 1
- 0x9200 0 0 3 &mpic 1 1
- 0x9200 0 0 4 &mpic 2 1
-
- /* IDSEL 0x12 func 3 - PCI slot 2 */
- 0x9300 0 0 1 &mpic 3 1
- 0x9300 0 0 2 &mpic 4 1
- 0x9300 0 0 3 &mpic 1 1
- 0x9300 0 0 4 &mpic 2 1
-
- /* IDSEL 0x12 func 4 - PCI slot 2 */
- 0x9400 0 0 1 &mpic 3 1
- 0x9400 0 0 2 &mpic 4 1
- 0x9400 0 0 3 &mpic 1 1
- 0x9400 0 0 4 &mpic 2 1
-
- /* IDSEL 0x12 func 5 - PCI slot 2 */
- 0x9500 0 0 1 &mpic 3 1
- 0x9500 0 0 2 &mpic 4 1
- 0x9500 0 0 3 &mpic 1 1
- 0x9500 0 0 4 &mpic 2 1
-
- /* IDSEL 0x12 func 6 - PCI slot 2 */
- 0x9600 0 0 1 &mpic 3 1
- 0x9600 0 0 2 &mpic 4 1
- 0x9600 0 0 3 &mpic 1 1
- 0x9600 0 0 4 &mpic 2 1
-
- /* IDSEL 0x12 func 7 - PCI slot 2 */
- 0x9700 0 0 1 &mpic 3 1
- 0x9700 0 0 2 &mpic 4 1
- 0x9700 0 0 3 &mpic 1 1
- 0x9700 0 0 4 &mpic 2 1
-
- // IDSEL 0x1c USB
- 0xe000 0 0 1 &i8259 12 2
- 0xe100 0 0 2 &i8259 9 2
- 0xe200 0 0 3 &i8259 10 2
- 0xe300 0 0 4 &i8259 11 2
-
- // IDSEL 0x1d Audio
- 0xe800 0 0 1 &i8259 6 2
-
- // IDSEL 0x1e Legacy
- 0xf000 0 0 1 &i8259 7 2
- 0xf100 0 0 1 &i8259 7 2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0 0 1 &i8259 14 2
- 0xf900 0 0 1 &i8259 5 2
- >;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x02000000 0x0 0xe0000000
- 0x02000000 0x0 0xe0000000
- 0x0 0x20000000
-
- 0x01000000 0x0 0x00000000
- 0x01000000 0x0 0x00000000
- 0x0 0x00010000>;
- uli1575@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x02000000 0x0 0xe0000000
- 0x02000000 0x0 0xe0000000
- 0x0 0x20000000
- 0x01000000 0x0 0x00000000
- 0x01000000 0x0 0x00000000
- 0x0 0x00010000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0 0 0 0>;
- ranges = <1 0 0x01000000 0 0
- 0x00001000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <1 0x20 2
- 1 0xa0 2
- 1 0x4d0 2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <1 0x60 1 1 0x64 1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible =
- "pnpPNP,b00";
- reg = <1 0x70 2>;
- };
-
- gpio@400 {
- reg = <1 0x400 0x80>;
- };
- };
- };
- };
-
- };
-
- pci1: pcie@fffe09000 {
- cell-index = <1>;
- compatible = "fsl,mpc8641-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0x0f 0xffe09000 0x0 0x1000>;
- bus-range = <0x0 0xff>;
- ranges = <0x02000000 0x0 0xe0000000 0x0c 0x20000000 0x0 0x20000000
- 0x01000000 0x0 0x00000000 0x0f 0xffc10000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0x0000 0 0 1 &mpic 4 1
- 0x0000 0 0 2 &mpic 5 1
- 0x0000 0 0 3 &mpic 6 1
- 0x0000 0 0 4 &mpic 7 1
- >;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x02000000 0x0 0xe0000000
- 0x02000000 0x0 0xe0000000
- 0x0 0x20000000
-
- 0x01000000 0x0 0x00000000
- 0x01000000 0x0 0x00000000
- 0x0 0x00010000>;
- };
- };
-};
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
deleted file mode 100644
index 68f0ed7..0000000
--- a/arch/powerpc/boot/dts/sbc8641d.dts
+++ /dev/null
@@ -1,447 +0,0 @@
-/*
- * SBC8641D Device Tree Source
- *
- * Copyright 2008 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
- model = "SBC8641D";
- compatible = "wind,sbc8641";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8641@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <32768>; // L1
- i-cache-size = <32768>; // L1
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- PowerPC,8641@1 {
- device_type = "cpu";
- reg = <1>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <32768>;
- i-cache-size = <32768>;
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x20000000>; // 512M at 0x0
- };
-
- localbus@f8005000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-localbus", "simple-bus";
- reg = <0xf8005000 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
-
- ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
- 1 0 0xf0000000 0x00010000 // 64KB EEPROM
- 2 0 0xf1000000 0x00100000 // EPLD (1MB)
- 3 0 0xe0000000 0x04000000 // 64MB LB SDRAM (CS3)
- 4 0 0xe4000000 0x04000000 // 64MB LB SDRAM (CS4)
- 6 0 0xf4000000 0x00100000 // LCD display (1MB)
- 7 0 0xe8000000 0x04000000>; // 64MB OneNAND
-
- flash@0,0 {
- compatible = "cfi-flash";
- reg = <0 0 0x01000000>;
- bank-width = <2>;
- device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "dtb";
- reg = <0x00000000 0x00100000>;
- read-only;
- };
- partition@300000 {
- label = "kernel";
- reg = <0x00100000 0x00400000>;
- read-only;
- };
- partition@400000 {
- label = "fs";
- reg = <0x00500000 0x00a00000>;
- };
- partition@700000 {
- label = "firmware";
- reg = <0x00f00000 0x00100000>;
- read-only;
- };
- };
-
- epld@2,0 {
- compatible = "wrs,epld-localbus";
- #address-cells = <2>;
- #size-cells = <1>;
- reg = <2 0 0x100000>;
- ranges = <0 0 5 0 1 // User switches
- 1 0 5 1 1 // Board ID/Rev
- 3 0 5 3 1>; // LEDs
- };
- };
-
- soc@f8000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf8000000 0x00100000>;
- bus-frequency = <0>;
-
- mcm-law@0 {
- compatible = "fsl,mcm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- mcm@1000 {
- compatible = "fsl,mpc8641-mcm", "fsl,mcm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@1f {
- reg = <0x1f>;
- };
- phy1: ethernet-phy@0 {
- reg = <0>;
- };
- phy2: ethernet-phy@1 {
- reg = <1>;
- };
- phy3: ethernet-phy@2 {
- reg = <2>;
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi3>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <28 2>;
- interrupt-parent = <&mpic>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- big-endian;
- };
-
- global-utilities@e0000 {
- compatible = "fsl,mpc8641-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@f8008000 {
- compatible = "fsl,mpc8641-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xf8008000 0x1000>;
- bus-range = <0x0 0xff>;
- ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0x0000 0 0 1 &mpic 0 1
- 0x0000 0 0 2 &mpic 1 1
- 0x0000 0 0 3 &mpic 2 1
- 0x0000 0 0 4 &mpic 3 1
- >;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x02000000 0x0 0x80000000
- 0x02000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x01000000 0x0 0x00000000
- 0x01000000 0x0 0x00000000
- 0x0 0x00100000>;
- };
-
- };
-
- pci1: pcie@f8009000 {
- compatible = "fsl,mpc8641-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xf8009000 0x1000>;
- bus-range = <0 0xff>;
- ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
- 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0x0000 0 0 1 &mpic 4 1
- 0x0000 0 0 2 &mpic 5 1
- 0x0000 0 0 3 &mpic 6 1
- 0x0000 0 0 4 &mpic 7 1
- >;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x02000000 0x0 0xa0000000
- 0x02000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x01000000 0x0 0x00000000
- 0x01000000 0x0 0x00000000
- 0x0 0x00100000>;
- };
- };
-};
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index 2a5fdcb..87fc15b 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -35,7 +35,6 @@
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_IDE=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_SPI_ATTRS=y
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index 3be85c5..6f753a7 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -34,7 +34,6 @@
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_IDE=y
CONFIG_NETDEVICES=y
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index f66d16b..b451905 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -31,8 +31,6 @@
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=m
CONFIG_SCSI=m
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
diff --git a/arch/powerpc/configs/86xx-hw.config b/arch/powerpc/configs/86xx-hw.config
new file mode 100644
index 0000000..f91f889
--- /dev/null
+++ b/arch/powerpc/configs/86xx-hw.config
@@ -0,0 +1,104 @@
+CONFIG_ATA=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BROADCOM_PHY=y
+# CONFIG_CARDBUS is not set
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_DS1682=y
+CONFIG_EEPROM_LEGACY=y
+CONFIG_GEF_WDT=y
+CONFIG_GIANFAR=y
+CONFIG_GPIO_GE_FPGA=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ_1000=y
+CONFIG_I2C_MPC=y
+CONFIG_I2C=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_TULIP=y
+CONFIG_NVRAM=y
+CONFIG_PATA_ALI=y
+CONFIG_PCCARD=y
+CONFIG_PCI_DEBUG=y
+# CONFIG_PCIEASPM is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_RX8581=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_SATA_SIL=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_LM92=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SND_INTEL8X0=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND=y
+CONFIG_SOUND=y
+CONFIG_ULI526X=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB=y
+CONFIG_VITESSE_PHY=y
+CONFIG_VME_BUS=y
+CONFIG_VME_TSI148=y
+CONFIG_WATCHDOG=y
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+# CONFIG_YENTA_TOSHIBA is not set
+CONFIG_YENTA=y
diff --git a/arch/powerpc/configs/86xx-smp.config b/arch/powerpc/configs/86xx-smp.config
new file mode 100644
index 0000000..40ac38d
--- /dev/null
+++ b/arch/powerpc/configs/86xx-smp.config
@@ -0,0 +1,2 @@
+CONFIG_NR_CPUS=2
+CONFIG_SMP=y
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
deleted file mode 100644
index 9792a2c..0000000
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ /dev/null
@@ -1,216 +0,0 @@
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_86xx=y
-CONFIG_GEF_PPC9A=y
-CONFIG_HIGHMEM=y
-CONFIG_HZ_1000=y
-CONFIG_PREEMPT=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEASPM is not set
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_CARDBUS is not set
-CONFIG_YENTA=y
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_TOSHIBA is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NET_PKTGEN=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_DS1682=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
-CONFIG_DUMMY=m
-CONFIG_NETCONSOLE=y
-CONFIG_TUN=m
-CONFIG_GIANFAR=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MPC=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_GE_FPGA=y
-CONFIG_SENSORS_LM90=y
-CONFIG_SENSORS_LM92=y
-CONFIG_WATCHDOG=y
-CONFIG_GEF_WDT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PPC_OF is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_INTF_PROC is not set
-CONFIG_RTC_DRV_RX8581=y
-CONFIG_STAGING=y
-CONFIG_VME_BUS=y
-CONFIG_VME_TSI148=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
deleted file mode 100644
index cadc366..0000000
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ /dev/null
@@ -1,214 +0,0 @@
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_86xx=y
-CONFIG_GEF_SBC310=y
-CONFIG_HIGHMEM=y
-CONFIG_HZ_1000=y
-CONFIG_PREEMPT=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEASPM is not set
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_CARDBUS is not set
-CONFIG_YENTA=y
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_TOSHIBA is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NET_PKTGEN=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_DS1682=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_ATA=y
-CONFIG_SATA_SIL24=y
-# CONFIG_ATA_SFF is not set
-CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
-CONFIG_DUMMY=m
-CONFIG_NETCONSOLE=y
-CONFIG_TUN=m
-CONFIG_GIANFAR=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MPC=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_GE_FPGA=y
-CONFIG_SENSORS_LM90=y
-CONFIG_SENSORS_LM92=y
-CONFIG_WATCHDOG=y
-CONFIG_GEF_WDT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PPC_OF is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_INTF_PROC is not set
-CONFIG_RTC_DRV_RX8581=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
deleted file mode 100644
index 2aa7d97..0000000
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ /dev/null
@@ -1,273 +0,0 @@
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_86xx=y
-CONFIG_GEF_SBC610=y
-CONFIG_HIGHMEM=y
-CONFIG_HZ_1000=y
-CONFIG_PREEMPT=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEASPM is not set
-CONFIG_PCI_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-# CONFIG_INET_LRO is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP_SCTP=m
-CONFIG_TIPC=m
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_PKTGEN=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_DS1682=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
-CONFIG_DUMMY=m
-CONFIG_NETCONSOLE=y
-CONFIG_TUN=m
-CONFIG_GIANFAR=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPPOATM=m
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MPC=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_GE_FPGA=y
-CONFIG_SENSORS_LM90=y
-CONFIG_SENSORS_LM92=y
-CONFIG_WATCHDOG=y
-CONFIG_GEF_WDT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PPC_OF is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_INTF_PROC is not set
-CONFIG_RTC_DRV_RX8581=y
-CONFIG_STAGING=y
-CONFIG_VME_BUS=y
-CONFIG_VME_TSI148=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
deleted file mode 100644
index e32207d..0000000
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ /dev/null
@@ -1,110 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_ELF_CORE is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_LDM_PARTITION=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_86xx=y
-CONFIG_MPC8610_HPCD=y
-CONFIG_HIGHMEM=y
-CONFIG_HZ_1000=y
-CONFIG_FORCE_MAX_ZONEORDER=12
-# CONFIG_SECCOMP is not set
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEASPM is not set
-CONFIG_PCI_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_IDE=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_PATA_ALI=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_NET_TULIP=y
-CONFIG_ULI526X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_MPC=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_FSL_DIU=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_POWERPC_SOC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS=y
-CONFIG_CRC_T10DIF=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
deleted file mode 100644
index a36e11d..0000000
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ /dev/null
@@ -1,156 +0,0 @@
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_86xx=y
-CONFIG_MPC8641_HPCN=y
-CONFIG_HIGHMEM=y
-CONFIG_HZ_1000=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_IP_SCTP=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_EEPROM_LEGACY=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_PATA_ALI=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_GIANFAR=y
-CONFIG_VITESSE_PHY=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_NVRAM=y
-CONFIG_I2C=y
-CONFIG_I2C_MPC=y
-# CONFIG_HWMON is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_INTEL8X0=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_CRC_T10DIF=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
deleted file mode 100644
index db79bde..0000000
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ /dev/null
@@ -1,246 +0,0 @@
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_86xx=y
-CONFIG_SBC8641D=y
-CONFIG_PREEMPT=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEASPM is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-# CONFIG_INET_LRO is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP_SCTP=m
-CONFIG_TIPC=m
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_PKTGEN=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_MULTIPATH=y
-CONFIG_MD_FAULTY=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=y
-CONFIG_DM_SNAPSHOT=y
-CONFIG_DM_MIRROR=y
-CONFIG_DM_ZERO=y
-CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
-CONFIG_DUMMY=m
-CONFIG_NETCONSOLE=y
-CONFIG_TUN=m
-CONFIG_GIANFAR=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPPOATM=m
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MPC=y
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/mpc86xx_basic_defconfig b/arch/powerpc/configs/mpc86xx_basic_defconfig
new file mode 100644
index 0000000..33af5c5
--- /dev/null
+++ b/arch/powerpc/configs/mpc86xx_basic_defconfig
@@ -0,0 +1,10 @@
+CONFIG_HIGHMEM=y
+CONFIG_KEXEC=y
+CONFIG_PPC_86xx=y
+CONFIG_PROC_KCORE=y
+CONFIG_GEF_PPC9A=y
+CONFIG_GEF_SBC310=y
+CONFIG_GEF_SBC610=y
+CONFIG_MPC8610_HPCD=y
+CONFIG_MPC8641_HPCN=y
+CONFIG_SBC8641D=y
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
deleted file mode 100644
index a457256..0000000
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ /dev/null
@@ -1,162 +0,0 @@
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_86xx=y
-CONFIG_MPC8641_HPCN=y
-CONFIG_SBC8641D=y
-CONFIG_MPC8610_HPCD=y
-CONFIG_GEF_SBC610=y
-CONFIG_HIGHMEM=y
-CONFIG_HZ_1000=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_IP_SCTP=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_EEPROM_LEGACY=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_PATA_ALI=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_GIANFAR=y
-CONFIG_VITESSE_PHY=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_NVRAM=y
-CONFIG_I2C=y
-CONFIG_I2C_MPC=y
-# CONFIG_HWMON is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_INTEL8X0=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_CRC_T10DIF=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 5f8229e..ffbafbf 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -69,6 +69,25 @@
#define _set_L3CR(val) do { } while(0)
#endif
+static inline void dcbz(void *addr)
+{
+ __asm__ __volatile__ ("dcbz 0, %0" : : "r"(addr) : "memory");
+}
+
+static inline void dcbi(void *addr)
+{
+ __asm__ __volatile__ ("dcbi 0, %0" : : "r"(addr) : "memory");
+}
+
+static inline void dcbf(void *addr)
+{
+ __asm__ __volatile__ ("dcbf 0, %0" : : "r"(addr) : "memory");
+}
+
+static inline void dcbst(void *addr)
+{
+ __asm__ __volatile__ ("dcbst 0, %0" : : "r"(addr) : "memory");
+}
#endif /* !__ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_CACHE_H */
diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
index 6229e6b..69fb16d 100644
--- a/arch/powerpc/include/asm/cacheflush.h
+++ b/arch/powerpc/include/asm/cacheflush.h
@@ -30,8 +30,6 @@
#define flush_dcache_mmap_lock(mapping) do { } while (0)
#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-extern void __flush_disable_L1(void);
-
extern void flush_icache_range(unsigned long, unsigned long);
extern void flush_icache_user_range(struct vm_area_struct *vma,
struct page *page, unsigned long addr,
@@ -47,12 +45,58 @@
}
#endif
-extern void flush_dcache_range(unsigned long start, unsigned long stop);
#ifdef CONFIG_PPC32
-extern void clean_dcache_range(unsigned long start, unsigned long stop);
-extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
+/*
+ * Write any modified data cache blocks out to memory and invalidate them.
+ * Does not invalidate the corresponding instruction cache blocks.
+ */
+static inline void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+ void *addr = (void *)(start & ~(L1_CACHE_BYTES - 1));
+ unsigned long size = stop - (unsigned long)addr + (L1_CACHE_BYTES - 1);
+ unsigned long i;
+
+ for (i = 0; i < size >> L1_CACHE_SHIFT; i++, addr += L1_CACHE_BYTES)
+ dcbf(addr);
+ mb(); /* sync */
+}
+
+/*
+ * Write any modified data cache blocks out to memory.
+ * Does not invalidate the corresponding cache lines (especially for
+ * any corresponding instruction cache).
+ */
+static inline void clean_dcache_range(unsigned long start, unsigned long stop)
+{
+ void *addr = (void *)(start & ~(L1_CACHE_BYTES - 1));
+ unsigned long size = stop - (unsigned long)addr + (L1_CACHE_BYTES - 1);
+ unsigned long i;
+
+ for (i = 0; i < size >> L1_CACHE_SHIFT; i++, addr += L1_CACHE_BYTES)
+ dcbst(addr);
+ mb(); /* sync */
+}
+
+/*
+ * Like above, but invalidate the D-cache. This is used by the 8xx
+ * to invalidate the cache so the PPC core doesn't get stale data
+ * from the CPM (no cache snooping here :-).
+ */
+static inline void invalidate_dcache_range(unsigned long start,
+ unsigned long stop)
+{
+ void *addr = (void *)(start & ~(L1_CACHE_BYTES - 1));
+ unsigned long size = stop - (unsigned long)addr + (L1_CACHE_BYTES - 1);
+ unsigned long i;
+
+ for (i = 0; i < size >> L1_CACHE_SHIFT; i++, addr += L1_CACHE_BYTES)
+ dcbi(addr);
+ mb(); /* sync */
+}
+
#endif /* CONFIG_PPC32 */
#ifdef CONFIG_PPC64
+extern void flush_dcache_range(unsigned long start, unsigned long stop);
extern void flush_inval_dcache_range(unsigned long start, unsigned long stop);
extern void flush_dcache_phys_range(unsigned long start, unsigned long stop);
#endif
diff --git a/arch/powerpc/include/asm/checksum.h b/arch/powerpc/include/asm/checksum.h
index e8d9ef4..ee655ed 100644
--- a/arch/powerpc/include/asm/checksum.h
+++ b/arch/powerpc/include/asm/checksum.h
@@ -9,30 +9,9 @@
* 2 of the License, or (at your option) any later version.
*/
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries. ihl is the number
- * of 32-bit words and is always >= 5.
- */
#ifdef CONFIG_GENERIC_CSUM
#include <asm-generic/checksum.h>
#else
-extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-
/*
* Computes the checksum of a memory block at src, length len,
* and adds in "sum" (32-bit), while copying the block to dst.
@@ -47,21 +26,12 @@
int len, __wsum sum,
int *src_err, int *dst_err);
-#ifdef __powerpc64__
#define _HAVE_ARCH_COPY_AND_CSUM_FROM_USER
extern __wsum csum_and_copy_from_user(const void __user *src, void *dst,
int len, __wsum sum, int *err_ptr);
#define HAVE_CSUM_COPY_USER
extern __wsum csum_and_copy_to_user(const void *src, void __user *dst,
int len, __wsum sum, int *err_ptr);
-#else
-/*
- * the same as csum_partial, but copies from src to dst while it
- * checksums.
- */
-#define csum_partial_copy_from_user(src, dst, len, sum, errp) \
- csum_partial_copy_generic((__force const void *)(src), (dst), (len), (sum), (errp), NULL)
-#endif
#define csum_partial_copy_nocheck(src, dst, len, sum) \
csum_partial_copy_generic((src), (dst), (len), (sum), NULL, NULL)
@@ -83,15 +53,6 @@
return (__force __sum16)(~((__force u32)sum + tmp) >> 16);
}
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
- return csum_fold(csum_partial(buff, len, 0));
-}
-
static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
unsigned short len,
unsigned short proto,
@@ -135,17 +96,117 @@
{
#ifdef __powerpc64__
u64 res = (__force u64)csum;
+#endif
+ if (__builtin_constant_p(csum) && csum == 0)
+ return addend;
+ if (__builtin_constant_p(addend) && addend == 0)
+ return csum;
+#ifdef __powerpc64__
res += (__force u64)addend;
return (__force __wsum)((u32)res + (res >> 32));
#else
asm("addc %0,%0,%1;"
"addze %0,%0;"
- : "+r" (csum) : "r" (addend));
+ : "+r" (csum) : "r" (addend) : "xer");
return csum;
#endif
}
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries. ihl is the number
+ * of 32-bit words and is always >= 5.
+ */
+static inline __wsum ip_fast_csum_nofold(const void *iph, unsigned int ihl)
+{
+ const u32 *ptr = (const u32 *)iph + 1;
+#ifdef __powerpc64__
+ unsigned int i;
+ u64 s = *(const u32 *)iph;
+
+ for (i = 0; i < ihl - 1; i++, ptr++)
+ s += *ptr;
+ s += (s >> 32);
+ return (__force __wsum)s;
+#else
+ __wsum sum, tmp;
+
+ asm("mtctr %3;"
+ "addc %0,%4,%5;"
+ "1: lwzu %1, 4(%2);"
+ "adde %0,%0,%1;"
+ "bdnz 1b;"
+ "addze %0,%0;"
+ : "=r" (sum), "=r" (tmp), "+b" (ptr)
+ : "r" (ihl - 2), "r" (*(const u32 *)iph), "r" (*ptr)
+ : "ctr", "xer", "memory");
+
+ return sum;
+#endif
+}
+
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+ return csum_fold(ip_fast_csum_nofold(iph, ihl));
+}
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum __csum_partial(const void *buff, int len, __wsum sum);
+
+static inline __wsum csum_partial(const void *buff, int len, __wsum sum)
+{
+ if (__builtin_constant_p(len) && len <= 16 && (len & 1) == 0) {
+ if (len == 2)
+ sum = csum_add(sum, (__force __wsum)*(const u16 *)buff);
+ if (len >= 4)
+ sum = csum_add(sum, (__force __wsum)*(const u32 *)buff);
+ if (len == 6)
+ sum = csum_add(sum, (__force __wsum)
+ *(const u16 *)(buff + 4));
+ if (len >= 8)
+ sum = csum_add(sum, (__force __wsum)
+ *(const u32 *)(buff + 4));
+ if (len == 10)
+ sum = csum_add(sum, (__force __wsum)
+ *(const u16 *)(buff + 8));
+ if (len >= 12)
+ sum = csum_add(sum, (__force __wsum)
+ *(const u32 *)(buff + 8));
+ if (len == 14)
+ sum = csum_add(sum, (__force __wsum)
+ *(const u16 *)(buff + 12));
+ if (len >= 16)
+ sum = csum_add(sum, (__force __wsum)
+ *(const u32 *)(buff + 12));
+ } else if (__builtin_constant_p(len) && (len & 3) == 0) {
+ sum = csum_add(sum, ip_fast_csum_nofold(buff, len >> 2));
+ } else {
+ sum = __csum_partial(buff, len, sum);
+ }
+ return sum;
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+ return csum_fold(csum_partial(buff, len, 0));
+}
+
#endif
#endif /* __KERNEL__ */
#endif
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 94ace9b..df4fb5f 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -43,6 +43,11 @@
extern int machine_check_e200(struct pt_regs *regs);
extern int machine_check_47x(struct pt_regs *regs);
+extern void cpu_down_flush_e500v2(void);
+extern void cpu_down_flush_e500mc(void);
+extern void cpu_down_flush_e5500(void);
+extern void cpu_down_flush_e6500(void);
+
/* NOTE WELL: Update identify_cpu() if fields are added or removed! */
struct cpu_spec {
/* CPU is matched via (PVR & pvr_mask) == pvr_value */
@@ -59,6 +64,9 @@
unsigned int icache_bsize;
unsigned int dcache_bsize;
+ /* flush caches inside the current cpu */
+ void (*cpu_down_flush)(void);
+
/* number of performance monitor counters */
unsigned int num_pmcs;
enum powerpc_pmc_type pmc_type;
diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h
index ba42e46..666bef4e 100644
--- a/arch/powerpc/include/asm/cputhreads.h
+++ b/arch/powerpc/include/asm/cputhreads.h
@@ -1,6 +1,7 @@
#ifndef _ASM_POWERPC_CPUTHREADS_H
#define _ASM_POWERPC_CPUTHREADS_H
+#ifndef __ASSEMBLY__
#include <linux/cpumask.h>
/*
@@ -94,7 +95,21 @@
return cpu | (threads_per_core - 1);
}
+static inline u32 get_tensr(void)
+{
+#ifdef CONFIG_BOOKE
+ if (cpu_has_feature(CPU_FTR_SMT))
+ return mfspr(SPRN_TENSR);
+#endif
+ return 1;
+}
+void book3e_start_thread(int thread, unsigned long addr);
+void book3e_stop_thread(int thread);
+
+#endif /* __ASSEMBLY__ */
+
+#define INVALID_THREAD_HWID 0x0fff
#endif /* _ASM_POWERPC_CPUTHREADS_H */
diff --git a/arch/powerpc/include/asm/fsl_pm.h b/arch/powerpc/include/asm/fsl_pm.h
new file mode 100644
index 0000000..47df55e
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_pm.h
@@ -0,0 +1,51 @@
+/*
+ * Support Power Management
+ *
+ * Copyright 2014-2015 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __PPC_FSL_PM_H
+#define __PPC_FSL_PM_H
+
+#define E500_PM_PH10 1
+#define E500_PM_PH15 2
+#define E500_PM_PH20 3
+#define E500_PM_PH30 4
+#define E500_PM_DOZE E500_PM_PH10
+#define E500_PM_NAP E500_PM_PH15
+
+#define PLAT_PM_SLEEP 20
+#define PLAT_PM_LPM20 30
+
+#define FSL_PM_SLEEP (1 << 0)
+#define FSL_PM_DEEP_SLEEP (1 << 1)
+
+struct fsl_pm_ops {
+ /* mask pending interrupts to the RCPM from MPIC */
+ void (*irq_mask)(int cpu);
+
+ /* unmask pending interrupts to the RCPM from MPIC */
+ void (*irq_unmask)(int cpu);
+ void (*cpu_enter_state)(int cpu, int state);
+ void (*cpu_exit_state)(int cpu, int state);
+ void (*cpu_up_prepare)(int cpu);
+ void (*cpu_die)(int cpu);
+ int (*plat_enter_sleep)(void);
+ void (*freeze_time_base)(bool freeze);
+
+ /* keep the power of IP blocks during sleep/deep sleep */
+ void (*set_ip_power)(bool enable, u32 mask);
+
+ /* get platform supported power management modes */
+ unsigned int (*get_pm_modes)(void);
+};
+
+extern const struct fsl_pm_ops *qoriq_pm_ops;
+
+int __init fsl_rcpm_init(void);
+
+#endif /* __PPC_FSL_PM_H */
diff --git a/arch/powerpc/include/asm/mmu-8xx.h b/arch/powerpc/include/asm/mmu-8xx.h
index f05500a..0a566f1 100644
--- a/arch/powerpc/include/asm/mmu-8xx.h
+++ b/arch/powerpc/include/asm/mmu-8xx.h
@@ -171,9 +171,9 @@
} mm_context_t;
#endif /* !__ASSEMBLY__ */
-#if (PAGE_SHIFT == 12)
+#if defined(CONFIG_PPC_4K_PAGES)
#define mmu_virtual_psize MMU_PAGE_4K
-#elif (PAGE_SHIFT == 14)
+#elif defined(CONFIG_PPC_16K_PAGES)
#define mmu_virtual_psize MMU_PAGE_16K
#else
#error "Unsupported PAGE_SIZE"
diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h
index c82cbf5..7808475 100644
--- a/arch/powerpc/include/asm/nohash/32/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/32/pgtable.h
@@ -86,7 +86,7 @@
* We no longer map larger than phys RAM with the BATs so we don't have
* to worry about the VMALLOC_OFFSET causing problems. We do have to worry
* about clashes between our early calls to ioremap() that start growing down
- * from ioremap_base being run into the VM area allocations (growing upwards
+ * from IOREMAP_TOP being run into the VM area allocations (growing upwards
* from VMALLOC_START). For this reason we have ioremap_bot to check when
* we actually run into our mappings setup in the early boot with the VM
* system. This really does become a problem for machines with good amounts
@@ -309,7 +309,8 @@
#define pte_index(address) \
(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
#define pte_offset_kernel(dir, addr) \
- ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr))
+ (pmd_bad(*(dir)) ? NULL : (pte_t *)pmd_page_vaddr(*(dir)) + \
+ pte_index(addr))
#define pte_offset_map(dir, addr) \
((pte_t *) kmap_atomic(pmd_page(*(dir))) + pte_index(addr))
#define pte_unmap(pte) kunmap_atomic(pte)
diff --git a/arch/powerpc/include/asm/page_32.h b/arch/powerpc/include/asm/page_32.h
index 68d73b2..6a8e179 100644
--- a/arch/powerpc/include/asm/page_32.h
+++ b/arch/powerpc/include/asm/page_32.h
@@ -1,6 +1,8 @@
#ifndef _ASM_POWERPC_PAGE_32_H
#define _ASM_POWERPC_PAGE_32_H
+#include <asm/cache.h>
+
#if defined(CONFIG_PHYSICAL_ALIGN) && (CONFIG_PHYSICAL_START != 0)
#if (CONFIG_PHYSICAL_START % CONFIG_PHYSICAL_ALIGN) != 0
#error "CONFIG_PHYSICAL_START must be a multiple of CONFIG_PHYSICAL_ALIGN"
@@ -36,9 +38,18 @@
typedef unsigned long pte_basic_t;
#endif
-struct page;
-extern void clear_pages(void *page, int order);
-static inline void clear_page(void *page) { clear_pages(page, 0); }
+/*
+ * Clear page using the dcbz instruction, which doesn't cause any
+ * memory traffic (except to write out any cache lines which get
+ * displaced). This only works on cacheable memory.
+ */
+static inline void clear_page(void *addr)
+{
+ unsigned int i;
+
+ for (i = 0; i < PAGE_SIZE / L1_CACHE_BYTES; i++, addr += L1_CACHE_BYTES)
+ dcbz(addr);
+}
extern void copy_page(void *to, void *from);
#include <asm-generic/getorder.h>
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 52ed654..f5f4c66 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -1219,9 +1219,11 @@
#define mfspr(rn) ({unsigned long rval; \
asm volatile("mfspr %0," __stringify(rn) \
: "=r" (rval)); rval;})
+#ifndef mtspr
#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : \
: "r" ((unsigned long)(v)) \
: "memory")
+#endif
extern void msr_check_and_set(unsigned long bits);
extern bool strict_msr_control;
diff --git a/arch/powerpc/include/asm/reg_8xx.h b/arch/powerpc/include/asm/reg_8xx.h
index e8ea346..d41412c 100644
--- a/arch/powerpc/include/asm/reg_8xx.h
+++ b/arch/powerpc/include/asm/reg_8xx.h
@@ -4,6 +4,8 @@
#ifndef _ASM_POWERPC_REG_8xx_H
#define _ASM_POWERPC_REG_8xx_H
+#include <asm/mmu-8xx.h>
+
/* Cache control on the MPC8xx is provided through some additional
* special purpose registers.
*/
@@ -14,6 +16,15 @@
#define SPRN_DC_ADR 569 /* Address needed for some commands */
#define SPRN_DC_DAT 570 /* Read-only data register */
+/* Misc Debug */
+#define SPRN_DPDR 630
+#define SPRN_MI_CAM 816
+#define SPRN_MI_RAM0 817
+#define SPRN_MI_RAM1 818
+#define SPRN_MD_CAM 824
+#define SPRN_MD_RAM0 825
+#define SPRN_MD_RAM1 826
+
/* Commands. Only the first few are available to the instruction cache.
*/
#define IDC_ENABLE 0x02000000 /* Cache enable */
@@ -39,4 +50,86 @@
#define DC_DFWT 0x40000000 /* Data cache is forced write through */
#define DC_LES 0x20000000 /* Caches are little endian mode */
+#ifdef CONFIG_8xx_CPU6
+#define do_mtspr_cpu6(rn, rn_addr, v) \
+ do { \
+ int _reg_cpu6 = rn_addr, _tmp_cpu6[1]; \
+ asm volatile("stw %0, %1;" \
+ "lwz %0, %1;" \
+ "mtspr " __stringify(rn) ",%2" : \
+ : "r" (_reg_cpu6), "m"(_tmp_cpu6), \
+ "r" ((unsigned long)(v)) \
+ : "memory"); \
+ } while (0)
+
+#define do_mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : \
+ : "r" ((unsigned long)(v)) \
+ : "memory")
+#define mtspr(rn, v) \
+ do { \
+ if (rn == SPRN_IMMR) \
+ do_mtspr_cpu6(rn, 0x3d30, v); \
+ else if (rn == SPRN_IC_CST) \
+ do_mtspr_cpu6(rn, 0x2110, v); \
+ else if (rn == SPRN_IC_ADR) \
+ do_mtspr_cpu6(rn, 0x2310, v); \
+ else if (rn == SPRN_IC_DAT) \
+ do_mtspr_cpu6(rn, 0x2510, v); \
+ else if (rn == SPRN_DC_CST) \
+ do_mtspr_cpu6(rn, 0x3110, v); \
+ else if (rn == SPRN_DC_ADR) \
+ do_mtspr_cpu6(rn, 0x3310, v); \
+ else if (rn == SPRN_DC_DAT) \
+ do_mtspr_cpu6(rn, 0x3510, v); \
+ else if (rn == SPRN_MI_CTR) \
+ do_mtspr_cpu6(rn, 0x2180, v); \
+ else if (rn == SPRN_MI_AP) \
+ do_mtspr_cpu6(rn, 0x2580, v); \
+ else if (rn == SPRN_MI_EPN) \
+ do_mtspr_cpu6(rn, 0x2780, v); \
+ else if (rn == SPRN_MI_TWC) \
+ do_mtspr_cpu6(rn, 0x2b80, v); \
+ else if (rn == SPRN_MI_RPN) \
+ do_mtspr_cpu6(rn, 0x2d80, v); \
+ else if (rn == SPRN_MI_CAM) \
+ do_mtspr_cpu6(rn, 0x2190, v); \
+ else if (rn == SPRN_MI_RAM0) \
+ do_mtspr_cpu6(rn, 0x2390, v); \
+ else if (rn == SPRN_MI_RAM1) \
+ do_mtspr_cpu6(rn, 0x2590, v); \
+ else if (rn == SPRN_MD_CTR) \
+ do_mtspr_cpu6(rn, 0x3180, v); \
+ else if (rn == SPRN_M_CASID) \
+ do_mtspr_cpu6(rn, 0x3380, v); \
+ else if (rn == SPRN_MD_AP) \
+ do_mtspr_cpu6(rn, 0x3580, v); \
+ else if (rn == SPRN_MD_EPN) \
+ do_mtspr_cpu6(rn, 0x3780, v); \
+ else if (rn == SPRN_M_TWB) \
+ do_mtspr_cpu6(rn, 0x3980, v); \
+ else if (rn == SPRN_MD_TWC) \
+ do_mtspr_cpu6(rn, 0x3b80, v); \
+ else if (rn == SPRN_MD_RPN) \
+ do_mtspr_cpu6(rn, 0x3d80, v); \
+ else if (rn == SPRN_M_TW) \
+ do_mtspr_cpu6(rn, 0x3f80, v); \
+ else if (rn == SPRN_MD_CAM) \
+ do_mtspr_cpu6(rn, 0x3190, v); \
+ else if (rn == SPRN_MD_RAM0) \
+ do_mtspr_cpu6(rn, 0x3390, v); \
+ else if (rn == SPRN_MD_RAM1) \
+ do_mtspr_cpu6(rn, 0x3590, v); \
+ else if (rn == SPRN_DEC) \
+ do_mtspr_cpu6(rn, 0x2c00, v); \
+ else if (rn == SPRN_TBWL) \
+ do_mtspr_cpu6(rn, 0x3880, v); \
+ else if (rn == SPRN_TBWU) \
+ do_mtspr_cpu6(rn, 0x3a80, v); \
+ else if (rn == SPRN_DPDR) \
+ do_mtspr_cpu6(rn, 0x2d30, v); \
+ else \
+ do_mtspr(rn, v); \
+ } while (0)
+#endif
+
#endif /* _ASM_POWERPC_REG_8xx_H */
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index 825663c..174271e 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -67,6 +67,9 @@
void generic_set_cpu_dead(unsigned int cpu);
void generic_set_cpu_up(unsigned int cpu);
int generic_check_cpu_restart(unsigned int cpu);
+int is_cpu_dead(unsigned int cpu);
+#else
+#define generic_set_cpu_up(i) do { } while (0)
#endif
#ifdef CONFIG_PPC64
@@ -197,6 +200,7 @@
extern unsigned long __secondary_hold_spinloop;
extern unsigned long __secondary_hold_acknowledge;
extern char __secondary_hold;
+extern unsigned int booting_thread_hwid;
extern void __early_start(void);
#endif /* __ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h
index 2d7109a..1092fdd 100644
--- a/arch/powerpc/include/asm/time.h
+++ b/arch/powerpc/include/asm/time.h
@@ -31,8 +31,6 @@
extern void generic_calibrate_decr(void);
-extern void set_dec_cpu6(unsigned int val);
-
/* Some sane defaults: 125 MHz timebase, 1GHz processor */
extern unsigned long ppc_proc_freq;
#define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8)
@@ -166,14 +164,12 @@
{
#if defined(CONFIG_40x)
mtspr(SPRN_PIT, val);
-#elif defined(CONFIG_8xx_CPU6)
- set_dec_cpu6(val - 1);
#else
#ifndef CONFIG_BOOKE
--val;
#endif
mtspr(SPRN_DEC, val);
-#endif /* not 40x or 8xx_CPU6 */
+#endif /* not 40x */
}
static inline unsigned long tb_ticks_since(unsigned long tstamp)
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 10d5eab..0d0183d 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -376,6 +376,7 @@
DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features));
DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup));
DEFINE(CPU_SPEC_RESTORE, offsetof(struct cpu_spec, cpu_restore));
+ DEFINE(CPU_DOWN_FLUSH, offsetof(struct cpu_spec, cpu_down_flush));
DEFINE(pbe_address, offsetof(struct pbe, address));
DEFINE(pbe_orig_address, offsetof(struct pbe, orig_address));
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index dddba3e..462aed9 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -13,11 +13,13 @@
*
*/
+#include <asm/page.h>
#include <asm/processor.h>
#include <asm/cputable.h>
#include <asm/ppc_asm.h>
#include <asm/mmu-book3e.h>
#include <asm/asm-offsets.h>
+#include <asm/mpc85xx.h>
_GLOBAL(__e500_icache_setup)
mfspr r0, SPRN_L1CSR1
@@ -233,3 +235,113 @@
mtlr r5
blr
#endif
+
+/* flush L1 date cache, it can apply to e500v2, e500mc and e5500 */
+_GLOBAL(flush_dcache_L1)
+ mfmsr r10
+ wrteei 0
+
+ mfspr r3,SPRN_L1CFG0
+ rlwinm r5,r3,9,3 /* Extract cache block size */
+ twlgti r5,1 /* Only 32 and 64 byte cache blocks
+ * are currently defined.
+ */
+ li r4,32
+ subfic r6,r5,2 /* r6 = log2(1KiB / cache block size) -
+ * log2(number of ways)
+ */
+ slw r5,r4,r5 /* r5 = cache block size */
+
+ rlwinm r7,r3,0,0xff /* Extract number of KiB in the cache */
+ mulli r7,r7,13 /* An 8-way cache will require 13
+ * loads per set.
+ */
+ slw r7,r7,r6
+
+ /* save off HID0 and set DCFA */
+ mfspr r8,SPRN_HID0
+ ori r9,r8,HID0_DCFA@l
+ mtspr SPRN_HID0,r9
+ isync
+
+ LOAD_REG_IMMEDIATE(r6, KERNELBASE)
+ mr r4, r6
+ mtctr r7
+
+1: lwz r3,0(r4) /* Load... */
+ add r4,r4,r5
+ bdnz 1b
+
+ msync
+ mr r4, r6
+ mtctr r7
+
+1: dcbf 0,r4 /* ...and flush. */
+ add r4,r4,r5
+ bdnz 1b
+
+ /* restore HID0 */
+ mtspr SPRN_HID0,r8
+ isync
+
+ wrtee r10
+
+ blr
+
+has_L2_cache:
+ /* skip L2 cache on P2040/P2040E as they have no L2 cache */
+ mfspr r3, SPRN_SVR
+ /* shift right by 8 bits and clear E bit of SVR */
+ rlwinm r4, r3, 24, ~0x800
+
+ lis r3, SVR_P2040@h
+ ori r3, r3, SVR_P2040@l
+ cmpw r4, r3
+ beq 1f
+
+ li r3, 1
+ blr
+1:
+ li r3, 0
+ blr
+
+/* flush backside L2 cache */
+flush_backside_L2_cache:
+ mflr r10
+ bl has_L2_cache
+ mtlr r10
+ cmpwi r3, 0
+ beq 2f
+
+ /* Flush the L2 cache */
+ mfspr r3, SPRN_L2CSR0
+ ori r3, r3, L2CSR0_L2FL@l
+ msync
+ isync
+ mtspr SPRN_L2CSR0,r3
+ isync
+
+ /* check if it is complete */
+1: mfspr r3,SPRN_L2CSR0
+ andi. r3, r3, L2CSR0_L2FL@l
+ bne 1b
+2:
+ blr
+
+_GLOBAL(cpu_down_flush_e500v2)
+ mflr r0
+ bl flush_dcache_L1
+ mtlr r0
+ blr
+
+_GLOBAL(cpu_down_flush_e500mc)
+_GLOBAL(cpu_down_flush_e5500)
+ mflr r0
+ bl flush_dcache_L1
+ bl flush_backside_L2_cache
+ mtlr r0
+ blr
+
+/* L1 Data Cache of e6500 contains no modified data, no flush is required */
+_GLOBAL(cpu_down_flush_e6500)
+ blr
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index be4d730..6c662b8 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -2050,6 +2050,7 @@
.cpu_setup = __setup_cpu_e500v2,
.machine_check = machine_check_e500,
.platform = "ppc8548",
+ .cpu_down_flush = cpu_down_flush_e500v2,
},
#else
{ /* e500mc */
@@ -2069,6 +2070,7 @@
.cpu_setup = __setup_cpu_e500mc,
.machine_check = machine_check_e500mc,
.platform = "ppce500mc",
+ .cpu_down_flush = cpu_down_flush_e500mc,
},
#endif /* CONFIG_PPC_E500MC */
#endif /* CONFIG_PPC32 */
@@ -2093,6 +2095,7 @@
#endif
.machine_check = machine_check_e500mc,
.platform = "ppce5500",
+ .cpu_down_flush = cpu_down_flush_e5500,
},
{ /* e6500 */
.pvr_mask = 0xffff0000,
@@ -2115,6 +2118,7 @@
#endif
.machine_check = machine_check_e500mc,
.platform = "ppce6500",
+ .cpu_down_flush = cpu_down_flush_e6500,
},
#endif /* CONFIG_PPC_E500MC */
#ifdef CONFIG_PPC32
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 1b77956..2916283 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -40,6 +40,7 @@
#include <asm/kvm_book3s_asm.h>
#include <asm/ptrace.h>
#include <asm/hw_irq.h>
+#include <asm/cputhreads.h>
/* The physical memory is laid out such that the secondary processor
* spin code sits at 0x0000...0x00ff. On server, the vectors follow
@@ -181,6 +182,64 @@
#endif
#ifdef CONFIG_PPC_BOOK3E
+/*
+ * The booting_thread_hwid holds the thread id we want to boot in cpu
+ * hotplug case. It is set by cpu hotplug code, and is invalid by default.
+ * The thread id is the same as the initial value of SPRN_PIR[THREAD_ID]
+ * bit field.
+ */
+ .globl booting_thread_hwid
+booting_thread_hwid:
+ .long INVALID_THREAD_HWID
+ .align 3
+/*
+ * start a thread in the same core
+ * input parameters:
+ * r3 = the thread physical id
+ * r4 = the entry point where thread starts
+ */
+_GLOBAL(book3e_start_thread)
+ LOAD_REG_IMMEDIATE(r5, MSR_KERNEL)
+ cmpi 0, r3, 0
+ beq 10f
+ cmpi 0, r3, 1
+ beq 11f
+ /* If the thread id is invalid, just exit. */
+ b 13f
+10:
+ mttmr TMRN_IMSR0, r5
+ mttmr TMRN_INIA0, r4
+ b 12f
+11:
+ mttmr TMRN_IMSR1, r5
+ mttmr TMRN_INIA1, r4
+12:
+ isync
+ li r6, 1
+ sld r6, r6, r3
+ mtspr SPRN_TENS, r6
+13:
+ blr
+
+/*
+ * stop a thread in the same core
+ * input parameter:
+ * r3 = the thread physical id
+ */
+_GLOBAL(book3e_stop_thread)
+ cmpi 0, r3, 0
+ beq 10f
+ cmpi 0, r3, 1
+ beq 10f
+ /* If the thread id is invalid, just exit. */
+ b 13f
+10:
+ li r4, 1
+ sld r4, r4, r3
+ mtspr SPRN_TENC, r4
+13:
+ blr
+
_GLOBAL(fsl_secondary_thread_init)
mfspr r4,SPRN_BUCSR
@@ -261,6 +320,44 @@
mr r3,r24
mr r4,r25
bl book3e_secondary_core_init
+
+/*
+ * After common core init has finished, check if the current thread is the
+ * one we wanted to boot. If not, start the specified thread and stop the
+ * current thread.
+ */
+ LOAD_REG_ADDR(r4, booting_thread_hwid)
+ lwz r3, 0(r4)
+ li r5, INVALID_THREAD_HWID
+ cmpw r3, r5
+ beq 20f
+
+ /*
+ * The value of booting_thread_hwid has been stored in r3,
+ * so make it invalid.
+ */
+ stw r5, 0(r4)
+
+ /*
+ * Get the current thread id and check if it is the one we wanted.
+ * If not, start the one specified in booting_thread_hwid and stop
+ * the current thread.
+ */
+ mfspr r8, SPRN_TIR
+ cmpw r3, r8
+ beq 20f
+
+ /* start the specified thread */
+ LOAD_REG_ADDR(r5, fsl_secondary_thread_init)
+ ld r4, 0(r5)
+ bl book3e_start_thread
+
+ /* stop the current thread */
+ mr r3, r8
+ bl book3e_stop_thread
+10:
+ b 10b
+20:
#endif
generic_secondary_common_init:
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 78c1eba..80c6947 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -329,7 +329,7 @@
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
-#ifdef CONFIG_MODULES
+#if defined(CONFIG_MODULES) || defined (CONFIG_DEBUG_PAGEALLOC)
/* Only modules will cause ITLB Misses as we always
* pin the first 8MB of kernel memory */
mfspr r11, SPRN_SRR0 /* Get effective address of fault */
@@ -385,27 +385,26 @@
. = 0x1200
DataStoreTLBMiss:
-#ifdef CONFIG_8xx_CPU6
mtspr SPRN_SPRG_SCRATCH2, r3
-#endif
EXCEPTION_PROLOG_0
- mfcr r10
+ mfcr r3
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
- mfspr r11, SPRN_MD_EPN
- IS_KERNEL(r11, r11)
+ mfspr r10, SPRN_MD_EPN
+ IS_KERNEL(r11, r10)
mfspr r11, SPRN_M_TW /* Get level 1 table */
BRANCH_UNLESS_KERNEL(3f)
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
3:
- mtcr r10
- mfspr r10, SPRN_MD_EPN
/* Insert level 1 index */
rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11) /* Get the level 1 entry */
+ mtcr r11
+ bt- 28,DTLBMiss8M /* bit 28 = Large page (8M) */
+ mtcr r3
/* We have a pte table, so load fetch the pte from the table.
*/
@@ -453,13 +452,34 @@
MTSPR_CPU6(SPRN_MD_RPN, r10, r3) /* Update TLB entry */
/* Restore registers */
-#ifdef CONFIG_8xx_CPU6
mfspr r3, SPRN_SPRG_SCRATCH2
-#endif
mtspr SPRN_DAR, r11 /* Tag DAR */
EXCEPTION_EPILOG_0
rfi
+DTLBMiss8M:
+ mtcr r3
+ ori r11, r11, MD_SVALID
+ MTSPR_CPU6(SPRN_MD_TWC, r11, r3)
+#ifdef CONFIG_PPC_16K_PAGES
+ /*
+ * In 16k pages mode, each PGD entry defines a 64M block.
+ * Here we select the 8M page within the block.
+ */
+ rlwimi r11, r10, 0, 0x03800000
+#endif
+ rlwinm r10, r11, 0, 0xff800000
+ ori r10, r10, 0xf0 | MD_SPS16K | _PAGE_SHARED | _PAGE_DIRTY | \
+ _PAGE_PRESENT
+ MTSPR_CPU6(SPRN_MD_RPN, r10, r3) /* Update TLB entry */
+
+ li r11, RPN_PATTERN
+ mfspr r3, SPRN_SPRG_SCRATCH2
+ mtspr SPRN_DAR, r11 /* Tag DAR */
+ EXCEPTION_EPILOG_0
+ rfi
+
+
/* This is an instruction TLB error on the MPC8xx. This could be due
* to many reasons, such as executing guarded memory or illegal instruction
* addresses. There is nothing to do but handle a big time error fault.
@@ -537,13 +557,15 @@
/* Insert level 1 index */
3: rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11) /* Get the level 1 entry */
+ mtcr r11
+ bt 28,200f /* bit 28 = Large page (8M) */
rlwinm r11, r11,0,0,19 /* Extract page descriptor page address */
/* Insert level 2 index */
rlwimi r11, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
lwz r11, 0(r11) /* Get the pte */
/* concat physical page address(r11) and page offset(r10) */
rlwimi r11, r10, 0, 32 - PAGE_SHIFT, 31
- lwz r11,0(r11)
+201: lwz r11,0(r11)
/* Check if it really is a dcbx instruction. */
/* dcbt and dcbtst does not generate DTLB Misses/Errors,
* no need to include them here */
@@ -562,6 +584,10 @@
141: mfspr r10,SPRN_SPRG_SCRATCH2
b DARFixed /* Nope, go back to normal TLB processing */
+ /* concat physical page address(r11) and page offset(r10) */
+200: rlwimi r11, r10, 0, 32 - (PAGE_SHIFT << 1), 31
+ b 201b
+
144: mfspr r10, SPRN_DSISR
rlwinm r10, r10,0,7,5 /* Clear store bit for buggy dcbst insn */
mtspr SPRN_DSISR, r10
@@ -857,68 +883,6 @@
/*
- * Set up to use a given MMU context.
- * r3 is context number, r4 is PGD pointer.
- *
- * We place the physical address of the new task page directory loaded
- * into the MMU base register, and set the ASID compare register with
- * the new "context."
- */
-_GLOBAL(set_context)
-
-#ifdef CONFIG_BDI_SWITCH
- /* Context switch the PTE pointer for the Abatron BDI2000.
- * The PGDIR is passed as second argument.
- */
- lis r5, KERNELBASE@h
- lwz r5, 0xf0(r5)
- stw r4, 0x4(r5)
-#endif
-
- /* Register M_TW will contain base address of level 1 table minus the
- * lower part of the kernel PGDIR base address, so that all accesses to
- * level 1 table are done relative to lower part of kernel PGDIR base
- * address.
- */
- li r5, (swapper_pg_dir-PAGE_OFFSET)@l
- sub r4, r4, r5
- tophys (r4, r4)
-#ifdef CONFIG_8xx_CPU6
- lis r6, cpu6_errata_word@h
- ori r6, r6, cpu6_errata_word@l
- li r7, 0x3f80
- stw r7, 12(r6)
- lwz r7, 12(r6)
-#endif
- mtspr SPRN_M_TW, r4 /* Update pointeur to level 1 table */
-#ifdef CONFIG_8xx_CPU6
- li r7, 0x3380
- stw r7, 12(r6)
- lwz r7, 12(r6)
-#endif
- mtspr SPRN_M_CASID, r3 /* Update context */
- SYNC
- blr
-
-#ifdef CONFIG_8xx_CPU6
-/* It's here because it is unique to the 8xx.
- * It is important we get called with interrupts disabled. I used to
- * do that, but it appears that all code that calls this already had
- * interrupt disabled.
- */
- .globl set_dec_cpu6
-set_dec_cpu6:
- lis r7, cpu6_errata_word@h
- ori r7, r7, cpu6_errata_word@l
- li r4, 0x2c00
- stw r4, 8(r7)
- lwz r4, 8(r7)
- mtspr 22, r3 /* Update Decrementer */
- SYNC
- blr
-#endif
-
-/*
* We put a few things here that have to be page-aligned.
* This stuff goes at the beginning of the data segment,
* which is page-aligned.
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index f705171..3bfa315 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -1037,80 +1037,6 @@
isync /* Force context change */
blr
-_GLOBAL(flush_dcache_L1)
- mfspr r3,SPRN_L1CFG0
-
- rlwinm r5,r3,9,3 /* Extract cache block size */
- twlgti r5,1 /* Only 32 and 64 byte cache blocks
- * are currently defined.
- */
- li r4,32
- subfic r6,r5,2 /* r6 = log2(1KiB / cache block size) -
- * log2(number of ways)
- */
- slw r5,r4,r5 /* r5 = cache block size */
-
- rlwinm r7,r3,0,0xff /* Extract number of KiB in the cache */
- mulli r7,r7,13 /* An 8-way cache will require 13
- * loads per set.
- */
- slw r7,r7,r6
-
- /* save off HID0 and set DCFA */
- mfspr r8,SPRN_HID0
- ori r9,r8,HID0_DCFA@l
- mtspr SPRN_HID0,r9
- isync
-
- lis r4,KERNELBASE@h
- mtctr r7
-
-1: lwz r3,0(r4) /* Load... */
- add r4,r4,r5
- bdnz 1b
-
- msync
- lis r4,KERNELBASE@h
- mtctr r7
-
-1: dcbf 0,r4 /* ...and flush. */
- add r4,r4,r5
- bdnz 1b
-
- /* restore HID0 */
- mtspr SPRN_HID0,r8
- isync
-
- blr
-
-/* Flush L1 d-cache, invalidate and disable d-cache and i-cache */
-_GLOBAL(__flush_disable_L1)
- mflr r10
- bl flush_dcache_L1 /* Flush L1 d-cache */
- mtlr r10
-
- mfspr r4, SPRN_L1CSR0 /* Invalidate and disable d-cache */
- li r5, 2
- rlwimi r4, r5, 0, 3
-
- msync
- isync
- mtspr SPRN_L1CSR0, r4
- isync
-
-1: mfspr r4, SPRN_L1CSR0 /* Wait for the invalidate to finish */
- andi. r4, r4, 2
- bne 1b
-
- mfspr r4, SPRN_L1CSR1 /* Invalidate and disable i-cache */
- li r5, 2
- rlwimi r4, r5, 0, 3
-
- mtspr SPRN_L1CSR1, r4
- isync
-
- blr
-
#ifdef CONFIG_SMP
/* When we get here, r24 needs to hold the CPU # */
.globl __secondary_start
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index be8edd6..bf5160f 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -91,17 +91,16 @@
addc r7,r0,r7
addze r4,r4
1: beqlr cr1 /* all done if high part of A is 0 */
- mr r10,r3
mullw r9,r3,r5
- mulhwu r3,r3,r5
+ mulhwu r10,r3,r5
beq 2f
- mullw r0,r10,r6
- mulhwu r8,r10,r6
+ mullw r0,r3,r6
+ mulhwu r8,r3,r6
addc r7,r0,r7
adde r4,r4,r8
- addze r3,r3
+ addze r10,r10
2: addc r4,r4,r9
- addze r3,r3
+ addze r3,r10
blr
/*
@@ -296,12 +295,9 @@
* Flush instruction cache.
* This is a no-op on the 601.
*/
+#ifndef CONFIG_PPC_8xx
_GLOBAL(flush_instruction_cache)
-#if defined(CONFIG_8xx)
- isync
- lis r5, IDC_INVALL@h
- mtspr SPRN_IC_CST, r5
-#elif defined(CONFIG_4xx)
+#if defined(CONFIG_4xx)
#ifdef CONFIG_403GCX
li r3, 512
mtctr r3
@@ -334,9 +330,10 @@
mfspr r3,SPRN_HID0
ori r3,r3,HID0_ICFI
mtspr SPRN_HID0,r3
-#endif /* CONFIG_8xx/4xx */
+#endif /* CONFIG_4xx */
isync
blr
+#endif /* CONFIG_PPC_8xx */
/*
* Write any modified data cache blocks out to memory
@@ -350,10 +347,9 @@
PURGE_PREFETCHED_INS
blr /* for 601, do nothing */
END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
+ rlwinm r3,r3,0,0,31 - L1_CACHE_SHIFT
subf r4,r3,r4
- add r4,r4,r5
+ addi r4,r4,L1_CACHE_BYTES - 1
srwi. r4,r4,L1_CACHE_SHIFT
beqlr
mtctr r4
@@ -377,71 +373,6 @@
isync
blr
/*
- * Write any modified data cache blocks out to memory.
- * Does not invalidate the corresponding cache lines (especially for
- * any corresponding instruction cache).
- *
- * clean_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(clean_dcache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
-
-1: dcbst 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- blr
-
-/*
- * Write any modified data cache blocks out to memory and invalidate them.
- * Does not invalidate the corresponding instruction cache blocks.
- *
- * flush_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_dcache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
-
-1: dcbf 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- blr
-
-/*
- * Like above, but invalidate the D-cache. This is used by the 8xx
- * to invalidate the cache so the PPC core doesn't get stale data
- * from the CPM (no cache snooping here :-).
- *
- * invalidate_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(invalidate_dcache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
-
-1: dcbi 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbi's to get to ram */
- blr
-
-/*
* Flush a particular page from the data cache to RAM.
* Note: this is necessary because the instruction cache does *not*
* snoop from the data cache.
@@ -519,22 +450,6 @@
#endif /* CONFIG_BOOKE */
/*
- * Clear pages using the dcbz instruction, which doesn't cause any
- * memory traffic (except to write out any cache lines which get
- * displaced). This only works on cacheable memory.
- *
- * void clear_pages(void *page, int order) ;
- */
-_GLOBAL(clear_pages)
- li r0,PAGE_SIZE/L1_CACHE_BYTES
- slw r0,r0,r4
- mtctr r0
-1: dcbz 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- blr
-
-/*
* Copy a whole page. We use the dcbz instruction on the destination
* to reduce memory traffic (it eliminates the unnecessary reads of
* the destination into cache). This requires that the destination
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index ef7024da..9f01e28 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -6,7 +6,9 @@
#include <asm/cacheflush.h>
#include <asm/epapr_hcalls.h>
+#ifdef CONFIG_PPC64
EXPORT_SYMBOL(flush_dcache_range);
+#endif
EXPORT_SYMBOL(flush_icache_range);
EXPORT_SYMBOL(empty_zero_page);
diff --git a/arch/powerpc/kernel/ppc_ksyms_32.c b/arch/powerpc/kernel/ppc_ksyms_32.c
index 30ddd8a..2bfaafe 100644
--- a/arch/powerpc/kernel/ppc_ksyms_32.c
+++ b/arch/powerpc/kernel/ppc_ksyms_32.c
@@ -10,7 +10,6 @@
#include <asm/pgtable.h>
#include <asm/dcr.h>
-EXPORT_SYMBOL(clear_pages);
EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
EXPORT_SYMBOL(DMA_MODE_READ);
EXPORT_SYMBOL(DMA_MODE_WRITE);
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index ec9ec20..8575d04 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -427,7 +427,7 @@
for (i = 0; i < 100; i++) {
smp_rmb();
- if (per_cpu(cpu_state, cpu) == CPU_DEAD)
+ if (is_cpu_dead(cpu))
return;
msleep(100);
}
@@ -454,6 +454,11 @@
return per_cpu(cpu_state, cpu) == CPU_UP_PREPARE;
}
+int is_cpu_dead(unsigned int cpu)
+{
+ return per_cpu(cpu_state, cpu) == CPU_DEAD;
+}
+
static bool secondaries_inhibited(void)
{
return kvm_hv_mode_active();
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 4513d1a..ba21be1 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -22,8 +22,7 @@
obj64-$(CONFIG_ALTIVEC) += vmx-helper.o
ifeq ($(CONFIG_GENERIC_CSUM),)
-obj-y += checksum_$(CONFIG_WORD_SIZE).o
-obj-$(CONFIG_PPC64) += checksum_wrappers_64.o
+obj-y += checksum_$(CONFIG_WORD_SIZE).o checksum_wrappers.o
endif
obj-$(CONFIG_PPC_EMULATE_SSTEP) += sstep.o ldstfp.o
diff --git a/arch/powerpc/lib/checksum_32.S b/arch/powerpc/lib/checksum_32.S
index 6d67e05..d90870a 100644
--- a/arch/powerpc/lib/checksum_32.S
+++ b/arch/powerpc/lib/checksum_32.S
@@ -14,68 +14,59 @@
#include <linux/sys.h>
#include <asm/processor.h>
+#include <asm/cache.h>
#include <asm/errno.h>
#include <asm/ppc_asm.h>
.text
/*
- * ip_fast_csum(buf, len) -- Optimized for IP header
- * len is in words and is always >= 5.
- */
-_GLOBAL(ip_fast_csum)
- lwz r0,0(r3)
- lwzu r5,4(r3)
- addic. r4,r4,-2
- addc r0,r0,r5
- mtctr r4
- blelr-
-1: lwzu r4,4(r3)
- adde r0,r0,r4
- bdnz 1b
- addze r0,r0 /* add in final carry */
- rlwinm r3,r0,16,0,31 /* fold two halves together */
- add r3,r0,r3
- not r3,r3
- srwi r3,r3,16
- blr
-
-/*
* computes the checksum of a memory block at buff, length len,
* and adds in "sum" (32-bit)
*
- * csum_partial(buff, len, sum)
+ * __csum_partial(buff, len, sum)
*/
-_GLOBAL(csum_partial)
- addic r0,r5,0
+_GLOBAL(__csum_partial)
subi r3,r3,4
- srwi. r6,r4,2
+ srawi. r6,r4,2 /* Divide len by 4 and also clear carry */
beq 3f /* if we're doing < 4 bytes */
- andi. r5,r3,2 /* Align buffer to longword boundary */
+ andi. r0,r3,2 /* Align buffer to longword boundary */
beq+ 1f
- lhz r5,4(r3) /* do 2 bytes to get aligned */
- addi r3,r3,2
+ lhz r0,4(r3) /* do 2 bytes to get aligned */
subi r4,r4,2
- addc r0,r0,r5
+ addi r3,r3,2
srwi. r6,r4,2 /* # words to do */
+ adde r5,r5,r0
beq 3f
-1: mtctr r6
-2: lwzu r5,4(r3) /* the bdnz has zero overhead, so it should */
- adde r0,r0,r5 /* be unnecessary to unroll this loop */
+1: andi. r6,r6,3 /* Prepare to handle words 4 by 4 */
+ beq 21f
+ mtctr r6
+2: lwzu r0,4(r3)
+ adde r5,r5,r0
bdnz 2b
- andi. r4,r4,3
-3: cmpwi 0,r4,2
- blt+ 4f
- lhz r5,4(r3)
+21: srwi. r6,r4,4 /* # blocks of 4 words to do */
+ beq 3f
+ mtctr r6
+22: lwz r0,4(r3)
+ lwz r6,8(r3)
+ lwz r7,12(r3)
+ lwzu r8,16(r3)
+ adde r5,r5,r0
+ adde r5,r5,r6
+ adde r5,r5,r7
+ adde r5,r5,r8
+ bdnz 22b
+3: andi. r0,r4,2
+ beq+ 4f
+ lhz r0,4(r3)
addi r3,r3,2
- subi r4,r4,2
- adde r0,r0,r5
-4: cmpwi 0,r4,1
- bne+ 5f
- lbz r5,4(r3)
- slwi r5,r5,8 /* Upper byte of word */
- adde r0,r0,r5
-5: addze r3,r0 /* add in final carry */
+ adde r5,r5,r0
+4: andi. r0,r4,1
+ beq+ 5f
+ lbz r0,4(r3)
+ slwi r0,r0,8 /* Upper byte of word */
+ adde r5,r5,r0
+5: addze r3,r5 /* add in final carry */
blr
/*
@@ -87,123 +78,220 @@
*
* csum_partial_copy_generic(src, dst, len, sum, src_err, dst_err)
*/
+#define CSUM_COPY_16_BYTES_WITHEX(n) \
+8 ## n ## 0: \
+ lwz r7,4(r4); \
+8 ## n ## 1: \
+ lwz r8,8(r4); \
+8 ## n ## 2: \
+ lwz r9,12(r4); \
+8 ## n ## 3: \
+ lwzu r10,16(r4); \
+8 ## n ## 4: \
+ stw r7,4(r6); \
+ adde r12,r12,r7; \
+8 ## n ## 5: \
+ stw r8,8(r6); \
+ adde r12,r12,r8; \
+8 ## n ## 6: \
+ stw r9,12(r6); \
+ adde r12,r12,r9; \
+8 ## n ## 7: \
+ stwu r10,16(r6); \
+ adde r12,r12,r10
+
+#define CSUM_COPY_16_BYTES_EXCODE(n) \
+.section __ex_table,"a"; \
+ .align 2; \
+ .long 8 ## n ## 0b,src_error; \
+ .long 8 ## n ## 1b,src_error; \
+ .long 8 ## n ## 2b,src_error; \
+ .long 8 ## n ## 3b,src_error; \
+ .long 8 ## n ## 4b,dst_error; \
+ .long 8 ## n ## 5b,dst_error; \
+ .long 8 ## n ## 6b,dst_error; \
+ .long 8 ## n ## 7b,dst_error; \
+ .text
+
+ .text
+ .stabs "arch/powerpc/lib/",N_SO,0,0,0f
+ .stabs "checksum_32.S",N_SO,0,0,0f
+0:
+
+CACHELINE_BYTES = L1_CACHE_BYTES
+LG_CACHELINE_BYTES = L1_CACHE_SHIFT
+CACHELINE_MASK = (L1_CACHE_BYTES-1)
+
_GLOBAL(csum_partial_copy_generic)
- addic r0,r6,0
- subi r3,r3,4
- subi r4,r4,4
- srwi. r6,r5,2
- beq 3f /* if we're doing < 4 bytes */
- andi. r9,r4,2 /* Align dst to longword boundary */
- beq+ 1f
-81: lhz r6,4(r3) /* do 2 bytes to get aligned */
- addi r3,r3,2
- subi r5,r5,2
-91: sth r6,4(r4)
+ stwu r1,-16(r1)
+ stw r7,12(r1)
+ stw r8,8(r1)
+
+ andi. r0,r4,1 /* is destination address even ? */
+ cmplwi cr7,r0,0
+ addic r12,r6,0
+ addi r6,r4,-4
+ neg r0,r4
+ addi r4,r3,-4
+ andi. r0,r0,CACHELINE_MASK /* # bytes to start of cache line */
+ beq 58f
+
+ cmplw 0,r5,r0 /* is this more than total to do? */
+ blt 63f /* if not much to do */
+ andi. r8,r0,3 /* get it word-aligned first */
+ mtctr r8
+ beq+ 61f
+ li r3,0
+70: lbz r9,4(r4) /* do some bytes */
+ addi r4,r4,1
+ slwi r3,r3,8
+ rlwimi r3,r9,0,24,31
+71: stb r9,4(r6)
+ addi r6,r6,1
+ bdnz 70b
+ adde r12,r12,r3
+61: subf r5,r0,r5
+ srwi. r0,r0,2
+ mtctr r0
+ beq 58f
+72: lwzu r9,4(r4) /* do some words */
+ adde r12,r12,r9
+73: stwu r9,4(r6)
+ bdnz 72b
+
+58: srwi. r0,r5,LG_CACHELINE_BYTES /* # complete cachelines */
+ clrlwi r5,r5,32-LG_CACHELINE_BYTES
+ li r11,4
+ beq 63f
+
+ /* Here we decide how far ahead to prefetch the source */
+ li r3,4
+ cmpwi r0,1
+ li r7,0
+ ble 114f
+ li r7,1
+#if MAX_COPY_PREFETCH > 1
+ /* Heuristically, for large transfers we prefetch
+ MAX_COPY_PREFETCH cachelines ahead. For small transfers
+ we prefetch 1 cacheline ahead. */
+ cmpwi r0,MAX_COPY_PREFETCH
+ ble 112f
+ li r7,MAX_COPY_PREFETCH
+112: mtctr r7
+111: dcbt r3,r4
+ addi r3,r3,CACHELINE_BYTES
+ bdnz 111b
+#else
+ dcbt r3,r4
+ addi r3,r3,CACHELINE_BYTES
+#endif /* MAX_COPY_PREFETCH > 1 */
+
+114: subf r8,r7,r0
+ mr r0,r7
+ mtctr r8
+
+53: dcbt r3,r4
+54: dcbz r11,r6
+/* the main body of the cacheline loop */
+ CSUM_COPY_16_BYTES_WITHEX(0)
+#if L1_CACHE_BYTES >= 32
+ CSUM_COPY_16_BYTES_WITHEX(1)
+#if L1_CACHE_BYTES >= 64
+ CSUM_COPY_16_BYTES_WITHEX(2)
+ CSUM_COPY_16_BYTES_WITHEX(3)
+#if L1_CACHE_BYTES >= 128
+ CSUM_COPY_16_BYTES_WITHEX(4)
+ CSUM_COPY_16_BYTES_WITHEX(5)
+ CSUM_COPY_16_BYTES_WITHEX(6)
+ CSUM_COPY_16_BYTES_WITHEX(7)
+#endif
+#endif
+#endif
+ bdnz 53b
+ cmpwi r0,0
+ li r3,4
+ li r7,0
+ bne 114b
+
+63: srwi. r0,r5,2
+ mtctr r0
+ beq 64f
+30: lwzu r0,4(r4)
+ adde r12,r12,r0
+31: stwu r0,4(r6)
+ bdnz 30b
+
+64: andi. r0,r5,2
+ beq+ 65f
+40: lhz r0,4(r4)
addi r4,r4,2
- addc r0,r0,r6
- srwi. r6,r5,2 /* # words to do */
- beq 3f
-1: srwi. r6,r5,4 /* # groups of 4 words to do */
- beq 10f
- mtctr r6
-71: lwz r6,4(r3)
-72: lwz r9,8(r3)
-73: lwz r10,12(r3)
-74: lwzu r11,16(r3)
- adde r0,r0,r6
-75: stw r6,4(r4)
- adde r0,r0,r9
-76: stw r9,8(r4)
- adde r0,r0,r10
-77: stw r10,12(r4)
- adde r0,r0,r11
-78: stwu r11,16(r4)
- bdnz 71b
-10: rlwinm. r6,r5,30,30,31 /* # words left to do */
- beq 13f
- mtctr r6
-82: lwzu r9,4(r3)
-92: stwu r9,4(r4)
- adde r0,r0,r9
- bdnz 82b
-13: andi. r5,r5,3
-3: cmpwi 0,r5,2
- blt+ 4f
-83: lhz r6,4(r3)
- addi r3,r3,2
- subi r5,r5,2
-93: sth r6,4(r4)
- addi r4,r4,2
- adde r0,r0,r6
-4: cmpwi 0,r5,1
- bne+ 5f
-84: lbz r6,4(r3)
-94: stb r6,4(r4)
- slwi r6,r6,8 /* Upper byte of word */
- adde r0,r0,r6
-5: addze r3,r0 /* add in final carry */
+41: sth r0,4(r6)
+ adde r12,r12,r0
+ addi r6,r6,2
+65: andi. r0,r5,1
+ beq+ 66f
+50: lbz r0,4(r4)
+51: stb r0,4(r6)
+ slwi r0,r0,8
+ adde r12,r12,r0
+66: addze r3,r12
+ addi r1,r1,16
+ beqlr+ cr7
+ rlwinm r3,r3,8,0,31 /* swap bytes for odd destination */
blr
-/* These shouldn't go in the fixup section, since that would
- cause the ex_table addresses to get out of order. */
-
-src_error_4:
- mfctr r6 /* update # bytes remaining from ctr */
- rlwimi r5,r6,4,0,27
- b 79f
-src_error_1:
- li r6,0
- subi r5,r5,2
-95: sth r6,4(r4)
- addi r4,r4,2
-79: srwi. r6,r5,2
- beq 3f
- mtctr r6
-src_error_2:
- li r6,0
-96: stwu r6,4(r4)
- bdnz 96b
-3: andi. r5,r5,3
- beq src_error
-src_error_3:
- li r6,0
- mtctr r5
- addi r4,r4,3
-97: stbu r6,1(r4)
- bdnz 97b
+/* read fault */
src_error:
- cmpwi 0,r7,0
- beq 1f
- li r6,-EFAULT
- stw r6,0(r7)
-1: addze r3,r0
+ lwz r7,12(r1)
+ addi r1,r1,16
+ cmpwi cr0,r7,0
+ beqlr
+ li r0,-EFAULT
+ stw r0,0(r7)
blr
-
+/* write fault */
dst_error:
- cmpwi 0,r8,0
- beq 1f
- li r6,-EFAULT
- stw r6,0(r8)
-1: addze r3,r0
+ lwz r8,8(r1)
+ addi r1,r1,16
+ cmpwi cr0,r8,0
+ beqlr
+ li r0,-EFAULT
+ stw r0,0(r8)
blr
-.section __ex_table,"a"
- .long 81b,src_error_1
- .long 91b,dst_error
- .long 71b,src_error_4
- .long 72b,src_error_4
- .long 73b,src_error_4
- .long 74b,src_error_4
- .long 75b,dst_error
- .long 76b,dst_error
- .long 77b,dst_error
- .long 78b,dst_error
- .long 82b,src_error_2
- .long 92b,dst_error
- .long 83b,src_error_3
- .long 93b,dst_error
- .long 84b,src_error_3
- .long 94b,dst_error
- .long 95b,dst_error
- .long 96b,dst_error
- .long 97b,dst_error
+ .section __ex_table,"a"
+ .align 2
+ .long 70b,src_error
+ .long 71b,dst_error
+ .long 72b,src_error
+ .long 73b,dst_error
+ .long 54b,dst_error
+ .text
+
+/*
+ * this stuff handles faults in the cacheline loop and branches to either
+ * src_error (if in read part) or dst_error (if in write part)
+ */
+ CSUM_COPY_16_BYTES_EXCODE(0)
+#if L1_CACHE_BYTES >= 32
+ CSUM_COPY_16_BYTES_EXCODE(1)
+#if L1_CACHE_BYTES >= 64
+ CSUM_COPY_16_BYTES_EXCODE(2)
+ CSUM_COPY_16_BYTES_EXCODE(3)
+#if L1_CACHE_BYTES >= 128
+ CSUM_COPY_16_BYTES_EXCODE(4)
+ CSUM_COPY_16_BYTES_EXCODE(5)
+ CSUM_COPY_16_BYTES_EXCODE(6)
+ CSUM_COPY_16_BYTES_EXCODE(7)
+#endif
+#endif
+#endif
+
+ .section __ex_table,"a"
+ .align 2
+ .long 30b,src_error
+ .long 31b,dst_error
+ .long 40b,src_error
+ .long 41b,dst_error
+ .long 50b,src_error
+ .long 51b,dst_error
diff --git a/arch/powerpc/lib/checksum_64.S b/arch/powerpc/lib/checksum_64.S
index f3ef354..8e6e510 100644
--- a/arch/powerpc/lib/checksum_64.S
+++ b/arch/powerpc/lib/checksum_64.S
@@ -18,39 +18,12 @@
#include <asm/ppc_asm.h>
/*
- * ip_fast_csum(r3=buf, r4=len) -- Optimized for IP header
- * len is in words and is always >= 5.
- *
- * In practice len == 5, but this is not guaranteed. So this code does not
- * attempt to use doubleword instructions.
- */
-_GLOBAL(ip_fast_csum)
- lwz r0,0(r3)
- lwzu r5,4(r3)
- addic. r4,r4,-2
- addc r0,r0,r5
- mtctr r4
- blelr-
-1: lwzu r4,4(r3)
- adde r0,r0,r4
- bdnz 1b
- addze r0,r0 /* add in final carry */
- rldicl r4,r0,32,0 /* fold two 32-bit halves together */
- add r0,r0,r4
- srdi r0,r0,32
- rlwinm r3,r0,16,0,31 /* fold two halves together */
- add r3,r0,r3
- not r3,r3
- srwi r3,r3,16
- blr
-
-/*
* Computes the checksum of a memory block at buff, length len,
* and adds in "sum" (32-bit).
*
- * csum_partial(r3=buff, r4=len, r5=sum)
+ * __csum_partial(r3=buff, r4=len, r5=sum)
*/
-_GLOBAL(csum_partial)
+_GLOBAL(__csum_partial)
addic r0,r5,0 /* clear carry */
srdi. r6,r4,3 /* less than 8 bytes? */
diff --git a/arch/powerpc/lib/checksum_wrappers_64.c b/arch/powerpc/lib/checksum_wrappers.c
similarity index 100%
rename from arch/powerpc/lib/checksum_wrappers_64.c
rename to arch/powerpc/lib/checksum_wrappers.c
diff --git a/arch/powerpc/lib/ppc_ksyms.c b/arch/powerpc/lib/ppc_ksyms.c
index c7f8e95..c422812 100644
--- a/arch/powerpc/lib/ppc_ksyms.c
+++ b/arch/powerpc/lib/ppc_ksyms.c
@@ -17,10 +17,8 @@
EXPORT_SYMBOL(strncmp);
#ifndef CONFIG_GENERIC_CSUM
-EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(__csum_partial);
EXPORT_SYMBOL(csum_partial_copy_generic);
-EXPORT_SYMBOL(ip_fast_csum);
-EXPORT_SYMBOL(csum_tcpudp_magic);
#endif
EXPORT_SYMBOL(__copy_tofrom_user);
diff --git a/arch/powerpc/mm/8xx_mmu.c b/arch/powerpc/mm/8xx_mmu.c
new file mode 100644
index 0000000..9491005
--- /dev/null
+++ b/arch/powerpc/mm/8xx_mmu.c
@@ -0,0 +1,141 @@
+/*
+ * This file contains the routines for initializing the MMU
+ * on the 8xx series of chips.
+ * -- christophe
+ *
+ * Derived from arch/powerpc/mm/40x_mmu.c:
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/memblock.h>
+
+#include "mmu_decl.h"
+
+extern int __map_without_ltlbs;
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+void __init MMU_init_hw(void)
+{
+ /* Nothing to do for the time being but keep it similar to other PPC */
+}
+
+#define LARGE_PAGE_SIZE_4M (1<<22)
+#define LARGE_PAGE_SIZE_8M (1<<23)
+#define LARGE_PAGE_SIZE_64M (1<<26)
+
+unsigned long __init mmu_mapin_ram(unsigned long top)
+{
+ unsigned long v, s, mapped;
+ phys_addr_t p;
+
+ v = KERNELBASE;
+ p = 0;
+ s = top;
+
+ if (__map_without_ltlbs)
+ return 0;
+
+#ifdef CONFIG_PPC_4K_PAGES
+ while (s >= LARGE_PAGE_SIZE_8M) {
+ pmd_t *pmdp;
+ unsigned long val = p | MD_PS8MEG;
+
+ pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
+ *pmdp++ = __pmd(val);
+ *pmdp++ = __pmd(val + LARGE_PAGE_SIZE_4M);
+
+ v += LARGE_PAGE_SIZE_8M;
+ p += LARGE_PAGE_SIZE_8M;
+ s -= LARGE_PAGE_SIZE_8M;
+ }
+#else /* CONFIG_PPC_16K_PAGES */
+ while (s >= LARGE_PAGE_SIZE_64M) {
+ pmd_t *pmdp;
+ unsigned long val = p | MD_PS8MEG;
+
+ pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
+ *pmdp++ = __pmd(val);
+
+ v += LARGE_PAGE_SIZE_64M;
+ p += LARGE_PAGE_SIZE_64M;
+ s -= LARGE_PAGE_SIZE_64M;
+ }
+#endif
+
+ mapped = top - s;
+
+ /* If the size of RAM is not an exact power of two, we may not
+ * have covered RAM in its entirety with 8 MiB
+ * pages. Consequently, restrict the top end of RAM currently
+ * allocable so that calls to the MEMBLOCK to allocate PTEs for "tail"
+ * coverage with normal-sized pages (or other reasons) do not
+ * attempt to allocate outside the allowed range.
+ */
+ memblock_set_current_limit(mapped);
+
+ return mapped;
+}
+
+void setup_initial_memory_limit(phys_addr_t first_memblock_base,
+ phys_addr_t first_memblock_size)
+{
+ /* We don't currently support the first MEMBLOCK not mapping 0
+ * physical on those processors
+ */
+ BUG_ON(first_memblock_base != 0);
+
+#ifdef CONFIG_PIN_TLB
+ /* 8xx can only access 24MB at the moment */
+ memblock_set_current_limit(min_t(u64, first_memblock_size, 0x01800000));
+#else
+ /* 8xx can only access 8MB at the moment */
+ memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000));
+#endif
+}
+
+/*
+ * Set up to use a given MMU context.
+ * id is context number, pgd is PGD pointer.
+ *
+ * We place the physical address of the new task page directory loaded
+ * into the MMU base register, and set the ASID compare register with
+ * the new "context."
+ */
+void set_context(unsigned long id, pgd_t *pgd)
+{
+ s16 offset = (s16)(__pa(swapper_pg_dir));
+
+#ifdef CONFIG_BDI_SWITCH
+ pgd_t **ptr = *(pgd_t ***)(KERNELBASE + 0xf0);
+
+ /* Context switch the PTE pointer for the Abatron BDI2000.
+ * The PGDIR is passed as second argument.
+ */
+ *(ptr + 1) = pgd;
+#endif
+
+ /* Register M_TW will contain base address of level 1 table minus the
+ * lower part of the kernel PGDIR base address, so that all accesses to
+ * level 1 table are done relative to lower part of kernel PGDIR base
+ * address.
+ */
+ mtspr(SPRN_M_TW, __pa(pgd) - offset);
+
+ /* Update context */
+ mtspr(SPRN_M_CASID, id);
+ /* sync */
+ mb();
+}
+
+void flush_instruction_cache(void)
+{
+ isync();
+ mtspr(SPRN_IC_CST, IDC_INVALL);
+ isync();
+}
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 1ffeda8..adfee3f 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -25,6 +25,7 @@
obj-$(CONFIG_PPC_ICSWX_PID) += icswx_pid.o
obj-$(CONFIG_40x) += 40x_mmu.o
obj-$(CONFIG_44x) += 44x_mmu.o
+obj-$(CONFIG_PPC_8xx) += 8xx_mmu.o
obj-$(CONFIG_PPC_FSL_BOOK3E) += fsl_booke_mmu.o
obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o
obj-$(CONFIG_PPC_SPLPAR) += vphn.o
diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c
index 169aba4..2dc74e5 100644
--- a/arch/powerpc/mm/dma-noncoherent.c
+++ b/arch/powerpc/mm/dma-noncoherent.c
@@ -327,7 +327,7 @@
* invalidate only when cache-line aligned otherwise there is
* the potential for discarding uncommitted data from the cache
*/
- if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
+ if ((start | end) & (L1_CACHE_BYTES - 1))
flush_dcache_range(start, end);
else
invalidate_dcache_range(start, end);
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index f3afe3d..a1b2713 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -72,10 +72,11 @@
return tlbcam_addrs[idx].limit - tlbcam_addrs[idx].start + 1;
}
+#ifdef CONFIG_FSL_BOOKE
/*
* Return PA for this VA if it is mapped by a CAM, or 0
*/
-phys_addr_t v_mapped_by_tlbcam(unsigned long va)
+phys_addr_t v_block_mapped(unsigned long va)
{
int b;
for (b = 0; b < tlbcam_index; ++b)
@@ -87,7 +88,7 @@
/*
* Return VA for a given PA or 0 if not mapped
*/
-unsigned long p_mapped_by_tlbcam(phys_addr_t pa)
+unsigned long p_block_mapped(phys_addr_t pa)
{
int b;
for (b = 0; b < tlbcam_index; ++b)
@@ -97,6 +98,7 @@
return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys);
return 0;
}
+#endif
/*
* Set up a variable-size TLB entry (tlbcam). The parameters are not checked;
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index a10be66..4eb1b8f 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -178,10 +178,6 @@
/* Initialize early top-down ioremap allocator */
ioremap_bot = IOREMAP_TOP;
- /* Map in I/O resources */
- if (ppc_md.progress)
- ppc_md.progress("MMU:setio", 0x302);
-
if (ppc_md.progress)
ppc_md.progress("MMU:exit", 0x211);
@@ -193,22 +189,3 @@
/* Shortly after that, the entire linear mapping will be available */
memblock_set_current_limit(lowmem_end_addr);
}
-
-#ifdef CONFIG_8xx /* No 8xx specific .c file to put that in ... */
-void setup_initial_memory_limit(phys_addr_t first_memblock_base,
- phys_addr_t first_memblock_size)
-{
- /* We don't currently support the first MEMBLOCK not mapping 0
- * physical on those processors
- */
- BUG_ON(first_memblock_base != 0);
-
-#ifdef CONFIG_PIN_TLB
- /* 8xx can only access 24MB at the moment */
- memblock_set_current_limit(min_t(u64, first_memblock_size, 0x01800000));
-#else
- /* 8xx can only access 8MB at the moment */
- memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000));
-#endif
-}
-#endif /* CONFIG_8xx */
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 898d633..bfb7c0b 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -100,7 +100,6 @@
extern int __map_without_bats;
extern int __allow_ioremap_reserved;
-extern unsigned long ioremap_base;
extern unsigned int rtas_data, rtas_size;
struct hash_pte;
@@ -133,22 +132,17 @@
/* ...and now those things that may be slightly different between processor
* architectures. -- Dan
*/
-#if defined(CONFIG_8xx)
-#define MMU_init_hw() do { } while(0)
-#define mmu_mapin_ram(top) (0UL)
-
-#elif defined(CONFIG_4xx)
+#ifdef CONFIG_PPC32
extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(unsigned long top);
+#endif
-#elif defined(CONFIG_PPC_FSL_BOOK3E)
+#ifdef CONFIG_PPC_FSL_BOOK3E
extern unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx,
bool dryrun);
extern unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
phys_addr_t phys);
#ifdef CONFIG_PPC32
-extern void MMU_init_hw(void);
-extern unsigned long mmu_mapin_ram(unsigned long top);
extern void adjust_total_lowmem(void);
extern int switch_to_as1(void);
extern void restore_to_as0(int esel, int offset, void *dt_ptr, int bootcpu);
@@ -163,8 +157,14 @@
u32 MAS3;
u32 MAS7;
};
-#elif defined(CONFIG_PPC32)
-/* anything 32-bit except 4xx or 8xx */
-extern void MMU_init_hw(void);
-extern unsigned long mmu_mapin_ram(unsigned long top);
+#endif
+
+#if defined(CONFIG_6xx) || defined(CONFIG_FSL_BOOKE)
+/* 6xx have BATS */
+/* FSL_BOOKE have TLBCAM */
+phys_addr_t v_block_mapped(unsigned long va);
+unsigned long p_block_mapped(phys_addr_t pa);
+#else
+static inline phys_addr_t v_block_mapped(unsigned long va) { return 0; }
+static inline unsigned long p_block_mapped(phys_addr_t pa) { return 0; }
#endif
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 7692d1b..bf7bf32 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -37,35 +37,10 @@
#include "mmu_decl.h"
-unsigned long ioremap_base;
unsigned long ioremap_bot;
EXPORT_SYMBOL(ioremap_bot); /* aka VMALLOC_END */
-#ifdef CONFIG_6xx
-#define HAVE_BATS 1
-#endif
-
-#if defined(CONFIG_FSL_BOOKE)
-#define HAVE_TLBCAM 1
-#endif
-
-extern char etext[], _stext[];
-
-#ifdef HAVE_BATS
-extern phys_addr_t v_mapped_by_bats(unsigned long va);
-extern unsigned long p_mapped_by_bats(phys_addr_t pa);
-#else /* !HAVE_BATS */
-#define v_mapped_by_bats(x) (0UL)
-#define p_mapped_by_bats(x) (0UL)
-#endif /* HAVE_BATS */
-
-#ifdef HAVE_TLBCAM
-extern phys_addr_t v_mapped_by_tlbcam(unsigned long va);
-extern unsigned long p_mapped_by_tlbcam(phys_addr_t pa);
-#else /* !HAVE_TLBCAM */
-#define v_mapped_by_tlbcam(x) (0UL)
-#define p_mapped_by_tlbcam(x) (0UL)
-#endif /* HAVE_TLBCAM */
+extern char etext[], _stext[], _sinittext[], _einittext[];
#define PGDIR_ORDER (32 + PGD_T_LOG2 - PGDIR_SHIFT)
@@ -197,7 +172,7 @@
/*
* Choose an address to map it to.
* Once the vmalloc system is running, we use it.
- * Before then, we use space going down from ioremap_base
+ * Before then, we use space going down from IOREMAP_TOP
* (ioremap_bot records where we're up to).
*/
p = addr & PAGE_MASK;
@@ -228,19 +203,10 @@
/*
* Is it already mapped? Perhaps overlapped by a previous
- * BAT mapping. If the whole area is mapped then we're done,
- * otherwise remap it since we want to keep the virt addrs for
- * each request contiguous.
- *
- * We make the assumption here that if the bottom and top
- * of the range we want are mapped then it's mapped to the
- * same virt address (and this is contiguous).
- * -- Cort
+ * mapping.
*/
- if ((v = p_mapped_by_bats(p)) /*&& p_mapped_by_bats(p+size-1)*/ )
- goto out;
-
- if ((v = p_mapped_by_tlbcam(p)))
+ v = p_block_mapped(p);
+ if (v)
goto out;
if (slab_is_available()) {
@@ -278,7 +244,8 @@
* If mapped by BATs then there is nothing to do.
* Calling vfree() generates a benign warning.
*/
- if (v_mapped_by_bats((unsigned long)addr)) return;
+ if (v_block_mapped((unsigned long)addr))
+ return;
if (addr > high_memory && (unsigned long) addr < ioremap_bot)
vunmap((void *) (PAGE_MASK & (unsigned long)addr));
@@ -322,7 +289,8 @@
v = PAGE_OFFSET + s;
p = memstart_addr + s;
for (; s < top; s += PAGE_SIZE) {
- ktext = ((char *) v >= _stext && (char *) v < etext);
+ ktext = ((char *)v >= _stext && (char *)v < etext) ||
+ ((char *)v >= _sinittext && (char *)v < _einittext);
f = ktext ? pgprot_val(PAGE_KERNEL_TEXT) : pgprot_val(PAGE_KERNEL);
map_page(v, p, f);
#ifdef CONFIG_PPC_STD_MMU_32
@@ -403,7 +371,7 @@
BUG_ON(PageHighMem(page));
address = (unsigned long)page_address(page);
- if (v_mapped_by_bats(address) || v_mapped_by_tlbcam(address))
+ if (v_block_mapped(address))
return 0;
if (!get_pteptr(&init_mm, address, &kpte, &kpmd))
return -EINVAL;
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index 6b2f3e4..2a049fb 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -49,7 +49,7 @@
/*
* Return PA for this VA if it is mapped by a BAT, or 0
*/
-phys_addr_t v_mapped_by_bats(unsigned long va)
+phys_addr_t v_block_mapped(unsigned long va)
{
int b;
for (b = 0; b < 4; ++b)
@@ -61,7 +61,7 @@
/*
* Return VA for a given PA or 0 if not mapped
*/
-unsigned long p_mapped_by_bats(phys_addr_t pa)
+unsigned long p_block_mapped(phys_addr_t pa)
{
int b;
for (b = 0; b < 4; ++b)
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index bb04e4d..f466848 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -640,9 +640,7 @@
* transient mapping would cause problems.
*/
#ifdef CONFIG_SMP
- if (cpu != boot_cpuid &&
- (cpu != cpu_first_thread_sibling(cpu) ||
- cpu == cpu_first_thread_sibling(boot_cpuid)))
+ if (hweight32(get_tensr()) > 1)
map = false;
#endif
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 97915fe..e626461 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -8,6 +8,7 @@
select FSL_PCI if PCI
select SERIAL_8250_EXTENDED if SERIAL_8250
select SERIAL_8250_SHARE_IRQ if SERIAL_8250
+ select FSL_CORENET_RCPM if PPC_E500MC
default y
if FSL_SOC_BOOKE
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 1fe7fb9..7bc86da 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -2,6 +2,7 @@
# Makefile for the PowerPC 85xx linux kernel.
#
obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_FSL_PMC) += mpc85xx_pm_ops.o
obj-y += common.o
diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c
index 949f22c..28720a4 100644
--- a/arch/powerpc/platforms/85xx/common.c
+++ b/arch/powerpc/platforms/85xx/common.c
@@ -9,11 +9,14 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
+#include <asm/fsl_pm.h>
#include <soc/fsl/qe/qe.h>
#include <sysdev/cpm2_pic.h>
#include "mpc85xx.h"
+const struct fsl_pm_ops *qoriq_pm_ops;
+
static const struct of_device_id mpc85xx_common_ids[] __initconst = {
{ .type = "soc", },
{ .compatible = "soc", },
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c b/arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c
new file mode 100644
index 0000000..f05325f
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c
@@ -0,0 +1,106 @@
+/*
+ * MPC85xx PM operators
+ *
+ * Copyright 2015 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/fsl/guts.h>
+
+#include <asm/io.h>
+#include <asm/fsl_pm.h>
+
+static struct ccsr_guts __iomem *guts;
+
+static void mpc85xx_irq_mask(int cpu)
+{
+
+}
+
+static void mpc85xx_irq_unmask(int cpu)
+{
+
+}
+
+static void mpc85xx_cpu_die(int cpu)
+{
+ u32 tmp;
+
+ tmp = (mfspr(SPRN_HID0) & ~(HID0_DOZE|HID0_SLEEP)) | HID0_NAP;
+ mtspr(SPRN_HID0, tmp);
+
+ /* Enter NAP mode. */
+ tmp = mfmsr();
+ tmp |= MSR_WE;
+ asm volatile(
+ "msync\n"
+ "mtmsr %0\n"
+ "isync\n"
+ :
+ : "r" (tmp));
+}
+
+static void mpc85xx_cpu_up_prepare(int cpu)
+{
+
+}
+
+static void mpc85xx_freeze_time_base(bool freeze)
+{
+ uint32_t mask;
+
+ mask = CCSR_GUTS_DEVDISR_TB0 | CCSR_GUTS_DEVDISR_TB1;
+ if (freeze)
+ setbits32(&guts->devdisr, mask);
+ else
+ clrbits32(&guts->devdisr, mask);
+
+ in_be32(&guts->devdisr);
+}
+
+static const struct of_device_id mpc85xx_smp_guts_ids[] = {
+ { .compatible = "fsl,mpc8572-guts", },
+ { .compatible = "fsl,p1020-guts", },
+ { .compatible = "fsl,p1021-guts", },
+ { .compatible = "fsl,p1022-guts", },
+ { .compatible = "fsl,p1023-guts", },
+ { .compatible = "fsl,p2020-guts", },
+ { .compatible = "fsl,bsc9132-guts", },
+ {},
+};
+
+static const struct fsl_pm_ops mpc85xx_pm_ops = {
+ .freeze_time_base = mpc85xx_freeze_time_base,
+ .irq_mask = mpc85xx_irq_mask,
+ .irq_unmask = mpc85xx_irq_unmask,
+ .cpu_die = mpc85xx_cpu_die,
+ .cpu_up_prepare = mpc85xx_cpu_up_prepare,
+};
+
+int __init mpc85xx_setup_pmc(void)
+{
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, mpc85xx_smp_guts_ids);
+ if (np) {
+ guts = of_iomap(np, 0);
+ of_node_put(np);
+ if (!guts) {
+ pr_err("Could not map guts node address\n");
+ return -ENOMEM;
+ }
+ }
+
+ qoriq_pm_ops = &mpc85xx_pm_ops;
+
+ return 0;
+}
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 6b107ce..fe9f19e 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -2,7 +2,7 @@
* Author: Andy Fleming <afleming@freescale.com>
* Kumar Gala <galak@kernel.crashing.org>
*
- * Copyright 2006-2008, 2011-2012 Freescale Semiconductor Inc.
+ * Copyright 2006-2008, 2011-2012, 2015 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -15,7 +15,6 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/of.h>
-#include <linux/of_address.h>
#include <linux/kexec.h>
#include <linux/highmem.h>
#include <linux/cpu.h>
@@ -29,6 +28,7 @@
#include <asm/dbell.h>
#include <asm/code-patching.h>
#include <asm/cputhreads.h>
+#include <asm/fsl_pm.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/mpic.h>
@@ -43,35 +43,23 @@
u32 pir;
};
-static struct ccsr_guts __iomem *guts;
+#ifdef CONFIG_HOTPLUG_CPU
static u64 timebase;
static int tb_req;
static int tb_valid;
-static void mpc85xx_timebase_freeze(int freeze)
-{
- uint32_t mask;
-
- mask = CCSR_GUTS_DEVDISR_TB0 | CCSR_GUTS_DEVDISR_TB1;
- if (freeze)
- setbits32(&guts->devdisr, mask);
- else
- clrbits32(&guts->devdisr, mask);
-
- in_be32(&guts->devdisr);
-}
-
static void mpc85xx_give_timebase(void)
{
unsigned long flags;
local_irq_save(flags);
+ hard_irq_disable();
while (!tb_req)
barrier();
tb_req = 0;
- mpc85xx_timebase_freeze(1);
+ qoriq_pm_ops->freeze_time_base(true);
#ifdef CONFIG_PPC64
/*
* e5500/e6500 have a workaround for erratum A-006958 in place
@@ -104,7 +92,7 @@
while (tb_valid)
barrier();
- mpc85xx_timebase_freeze(0);
+ qoriq_pm_ops->freeze_time_base(false);
local_irq_restore(flags);
}
@@ -114,6 +102,7 @@
unsigned long flags;
local_irq_save(flags);
+ hard_irq_disable();
tb_req = 1;
while (!tb_valid)
@@ -126,36 +115,54 @@
local_irq_restore(flags);
}
-#ifdef CONFIG_HOTPLUG_CPU
static void smp_85xx_mach_cpu_die(void)
{
unsigned int cpu = smp_processor_id();
- u32 tmp;
local_irq_disable();
+ hard_irq_disable();
+ /* mask all irqs to prevent cpu wakeup */
+ qoriq_pm_ops->irq_mask(cpu);
+
idle_task_exit();
- generic_set_cpu_dead(cpu);
- mb();
mtspr(SPRN_TCR, 0);
+ mtspr(SPRN_TSR, mfspr(SPRN_TSR));
- __flush_disable_L1();
- tmp = (mfspr(SPRN_HID0) & ~(HID0_DOZE|HID0_SLEEP)) | HID0_NAP;
- mtspr(SPRN_HID0, tmp);
- isync();
+ generic_set_cpu_dead(cpu);
- /* Enter NAP mode. */
- tmp = mfmsr();
- tmp |= MSR_WE;
- mb();
- mtmsr(tmp);
- isync();
+ cur_cpu_spec->cpu_down_flush();
+
+ qoriq_pm_ops->cpu_die(cpu);
while (1)
;
}
+
+static void qoriq_cpu_kill(unsigned int cpu)
+{
+ int i;
+
+ for (i = 0; i < 500; i++) {
+ if (is_cpu_dead(cpu)) {
+#ifdef CONFIG_PPC64
+ paca[cpu].cpu_start = 0;
+#endif
+ return;
+ }
+ msleep(20);
+ }
+ pr_err("CPU%d didn't die...\n", cpu);
+}
#endif
+/*
+ * To keep it compatible with old boot program which uses
+ * cache-inhibit spin table, we need to flush the cache
+ * before accessing spin table to invalidate any staled data.
+ * We also need to flush the cache after writing to spin
+ * table to push data out.
+ */
static inline void flush_spin_table(void *spin_table)
{
flush_dcache_range((ulong)spin_table,
@@ -173,78 +180,28 @@
static void wake_hw_thread(void *info)
{
void fsl_secondary_thread_init(void);
- unsigned long imsr, inia;
- int nr = *(const int *)info;
+ unsigned long inia;
+ int cpu = *(const int *)info;
- imsr = MSR_KERNEL;
inia = *(unsigned long *)fsl_secondary_thread_init;
-
- if (cpu_thread_in_core(nr) == 0) {
- /* For when we boot on a secondary thread with kdump */
- mttmr(TMRN_IMSR0, imsr);
- mttmr(TMRN_INIA0, inia);
- mtspr(SPRN_TENS, TEN_THREAD(0));
- } else {
- mttmr(TMRN_IMSR1, imsr);
- mttmr(TMRN_INIA1, inia);
- mtspr(SPRN_TENS, TEN_THREAD(1));
- }
-
- smp_generic_kick_cpu(nr);
+ book3e_start_thread(cpu_thread_in_core(cpu), inia);
}
#endif
-static int smp_85xx_kick_cpu(int nr)
+static int smp_85xx_start_cpu(int cpu)
{
- unsigned long flags;
- const u64 *cpu_rel_addr;
- __iomem struct epapr_spin_table *spin_table;
- struct device_node *np;
- int hw_cpu = get_hard_smp_processor_id(nr);
- int ioremappable;
int ret = 0;
+ struct device_node *np;
+ const u64 *cpu_rel_addr;
+ unsigned long flags;
+ int ioremappable;
+ int hw_cpu = get_hard_smp_processor_id(cpu);
+ struct epapr_spin_table __iomem *spin_table;
- WARN_ON(nr < 0 || nr >= NR_CPUS);
- WARN_ON(hw_cpu < 0 || hw_cpu >= NR_CPUS);
-
- pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr);
-
-#ifdef CONFIG_PPC64
- /* Threads don't use the spin table */
- if (cpu_thread_in_core(nr) != 0) {
- int primary = cpu_first_thread_sibling(nr);
-
- if (WARN_ON_ONCE(!cpu_has_feature(CPU_FTR_SMT)))
- return -ENOENT;
-
- if (cpu_thread_in_core(nr) != 1) {
- pr_err("%s: cpu %d: invalid hw thread %d\n",
- __func__, nr, cpu_thread_in_core(nr));
- return -ENOENT;
- }
-
- if (!cpu_online(primary)) {
- pr_err("%s: cpu %d: primary %d not online\n",
- __func__, nr, primary);
- return -ENOENT;
- }
-
- smp_call_function_single(primary, wake_hw_thread, &nr, 0);
- return 0;
- } else if (cpu_thread_in_core(boot_cpuid) != 0 &&
- cpu_first_thread_sibling(boot_cpuid) == nr) {
- if (WARN_ON_ONCE(!cpu_has_feature(CPU_FTR_SMT)))
- return -ENOENT;
-
- smp_call_function_single(boot_cpuid, wake_hw_thread, &nr, 0);
- }
-#endif
-
- np = of_get_cpu_node(nr, NULL);
+ np = of_get_cpu_node(cpu, NULL);
cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL);
-
- if (cpu_rel_addr == NULL) {
- printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr);
+ if (!cpu_rel_addr) {
+ pr_err("No cpu-release-addr for cpu %d\n", cpu);
return -ENOENT;
}
@@ -264,28 +221,18 @@
spin_table = phys_to_virt(*cpu_rel_addr);
local_irq_save(flags);
-#ifdef CONFIG_PPC32
-#ifdef CONFIG_HOTPLUG_CPU
- /* Corresponding to generic_set_cpu_dead() */
- generic_set_cpu_up(nr);
+ hard_irq_disable();
- if (system_state == SYSTEM_RUNNING) {
- /*
- * To keep it compatible with old boot program which uses
- * cache-inhibit spin table, we need to flush the cache
- * before accessing spin table to invalidate any staled data.
- * We also need to flush the cache after writing to spin
- * table to push data out.
- */
- flush_spin_table(spin_table);
- out_be32(&spin_table->addr_l, 0);
- flush_spin_table(spin_table);
+ if (qoriq_pm_ops)
+ qoriq_pm_ops->cpu_up_prepare(cpu);
+ /* if cpu is not spinning, reset it */
+ if (read_spin_table_addr_l(spin_table) != 1) {
/*
* We don't set the BPTR register here since it already points
* to the boot page properly.
*/
- mpic_reset_core(nr);
+ mpic_reset_core(cpu);
/*
* wait until core is ready...
@@ -295,40 +242,23 @@
if (!spin_event_timeout(
read_spin_table_addr_l(spin_table) == 1,
10000, 100)) {
- pr_err("%s: timeout waiting for core %d to reset\n",
- __func__, hw_cpu);
- ret = -ENOENT;
- goto out;
+ pr_err("timeout waiting for cpu %d to reset\n",
+ hw_cpu);
+ ret = -EAGAIN;
+ goto err;
}
-
- /* clear the acknowledge status */
- __secondary_hold_acknowledge = -1;
}
-#endif
- flush_spin_table(spin_table);
- out_be32(&spin_table->pir, hw_cpu);
- out_be32(&spin_table->addr_l, __pa(__early_start));
- flush_spin_table(spin_table);
-
- /* Wait a bit for the CPU to ack. */
- if (!spin_event_timeout(__secondary_hold_acknowledge == hw_cpu,
- 10000, 100)) {
- pr_err("%s: timeout waiting for core %d to ack\n",
- __func__, hw_cpu);
- ret = -ENOENT;
- goto out;
- }
-out:
-#else
- smp_generic_kick_cpu(nr);
flush_spin_table(spin_table);
out_be32(&spin_table->pir, hw_cpu);
+#ifdef CONFIG_PPC64
out_be64((u64 *)(&spin_table->addr_h),
__pa(ppc_function_entry(generic_secondary_smp_init)));
- flush_spin_table(spin_table);
+#else
+ out_be32(&spin_table->addr_l, __pa(__early_start));
#endif
-
+ flush_spin_table(spin_table);
+err:
local_irq_restore(flags);
if (ioremappable)
@@ -337,6 +267,81 @@
return ret;
}
+static int smp_85xx_kick_cpu(int nr)
+{
+ int ret = 0;
+#ifdef CONFIG_PPC64
+ int primary = nr;
+#endif
+
+ WARN_ON(nr < 0 || nr >= num_possible_cpus());
+
+ pr_debug("kick CPU #%d\n", nr);
+
+#ifdef CONFIG_PPC64
+ if (threads_per_core == 2) {
+ if (WARN_ON_ONCE(!cpu_has_feature(CPU_FTR_SMT)))
+ return -ENOENT;
+
+ booting_thread_hwid = cpu_thread_in_core(nr);
+ primary = cpu_first_thread_sibling(nr);
+
+ if (qoriq_pm_ops)
+ qoriq_pm_ops->cpu_up_prepare(nr);
+
+ /*
+ * If either thread in the core is online, use it to start
+ * the other.
+ */
+ if (cpu_online(primary)) {
+ smp_call_function_single(primary,
+ wake_hw_thread, &nr, 1);
+ goto done;
+ } else if (cpu_online(primary + 1)) {
+ smp_call_function_single(primary + 1,
+ wake_hw_thread, &nr, 1);
+ goto done;
+ }
+
+ /*
+ * If getting here, it means both threads in the core are
+ * offline. So start the primary thread, then it will start
+ * the thread specified in booting_thread_hwid, the one
+ * corresponding to nr.
+ */
+
+ } else if (threads_per_core == 1) {
+ /*
+ * If one core has only one thread, set booting_thread_hwid to
+ * an invalid value.
+ */
+ booting_thread_hwid = INVALID_THREAD_HWID;
+
+ } else if (threads_per_core > 2) {
+ pr_err("Do not support more than 2 threads per CPU.");
+ return -EINVAL;
+ }
+
+ ret = smp_85xx_start_cpu(primary);
+ if (ret)
+ return ret;
+
+done:
+ paca[nr].cpu_start = 1;
+ generic_set_cpu_up(nr);
+
+ return ret;
+#else
+ ret = smp_85xx_start_cpu(nr);
+ if (ret)
+ return ret;
+
+ generic_set_cpu_up(nr);
+
+ return ret;
+#endif
+}
+
struct smp_ops_t smp_85xx_ops = {
.kick_cpu = smp_85xx_kick_cpu,
.cpu_bootable = smp_generic_cpu_bootable,
@@ -359,7 +364,7 @@
local_irq_disable();
if (secondary) {
- __flush_disable_L1();
+ cur_cpu_spec->cpu_down_flush();
atomic_inc(&kexec_down_cpus);
/* loop forever */
while (1);
@@ -467,16 +472,6 @@
smp_85xx_basic_setup(cpu_nr);
}
-static const struct of_device_id mpc85xx_smp_guts_ids[] = {
- { .compatible = "fsl,mpc8572-guts", },
- { .compatible = "fsl,p1020-guts", },
- { .compatible = "fsl,p1021-guts", },
- { .compatible = "fsl,p1022-guts", },
- { .compatible = "fsl,p1023-guts", },
- { .compatible = "fsl,p2020-guts", },
- {},
-};
-
void __init mpc85xx_smp_init(void)
{
struct device_node *np;
@@ -500,22 +495,21 @@
smp_85xx_ops.probe = NULL;
}
- np = of_find_matching_node(NULL, mpc85xx_smp_guts_ids);
- if (np) {
- guts = of_iomap(np, 0);
- of_node_put(np);
- if (!guts) {
- pr_err("%s: Could not map guts node address\n",
- __func__);
- return;
- }
+#ifdef CONFIG_HOTPLUG_CPU
+#ifdef CONFIG_FSL_CORENET_RCPM
+ fsl_rcpm_init();
+#endif
+
+#ifdef CONFIG_FSL_PMC
+ mpc85xx_setup_pmc();
+#endif
+ if (qoriq_pm_ops) {
smp_85xx_ops.give_timebase = mpc85xx_give_timebase;
smp_85xx_ops.take_timebase = mpc85xx_take_timebase;
-#ifdef CONFIG_HOTPLUG_CPU
ppc_md.cpu_die = smp_85xx_mach_cpu_die;
-#endif
+ smp_85xx_ops.cpu_die = qoriq_cpu_kill;
}
-
+#endif
smp_ops = &smp_85xx_ops;
#ifdef CONFIG_KEXEC
diff --git a/arch/powerpc/platforms/85xx/smp.h b/arch/powerpc/platforms/85xx/smp.h
index e2b4493..0b20ae3 100644
--- a/arch/powerpc/platforms/85xx/smp.h
+++ b/arch/powerpc/platforms/85xx/smp.h
@@ -5,6 +5,7 @@
#ifdef CONFIG_SMP
void __init mpc85xx_smp_init(void);
+int __init mpc85xx_setup_pmc(void);
#else
static inline void mpc85xx_smp_init(void)
{
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index ede815d..2d889ad 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -2,7 +2,7 @@
# Makefile for the PowerPC 86xx linux kernel.
#
-obj-y := pic.o
+obj-y := pic.o common.o
obj-$(CONFIG_SMP) += mpc86xx_smp.o
obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o
obj-$(CONFIG_SBC8641D) += sbc8641d.o
diff --git a/arch/powerpc/platforms/86xx/common.c b/arch/powerpc/platforms/86xx/common.c
new file mode 100644
index 0000000..0f7b7fc
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/common.c
@@ -0,0 +1,43 @@
+/*
+ * Routines common to most mpc86xx-based boards.
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/of_platform.h>
+#include <asm/synch.h>
+
+#include "mpc86xx.h"
+
+static const struct of_device_id mpc86xx_common_ids[] __initconst = {
+ { .type = "soc", },
+ { .compatible = "soc", },
+ { .compatible = "simple-bus", },
+ { .name = "localbus", },
+ { .compatible = "gianfar", },
+ { .compatible = "fsl,mpc8641-pcie", },
+ {},
+};
+
+int __init mpc86xx_common_publish_devices(void)
+{
+ return of_platform_bus_probe(NULL, mpc86xx_common_ids, NULL);
+}
+
+long __init mpc86xx_time_init(void)
+{
+ unsigned int temp;
+
+ /* Set the time base to zero */
+ mtspr(SPRN_TBWL, 0);
+ mtspr(SPRN_TBWU, 0);
+
+ temp = mfspr(SPRN_HID0);
+ temp |= HID0_TBEN;
+ mtspr(SPRN_HID0, temp);
+ isync();
+
+ return 0;
+}
diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
index bf17933..8e63b75 100644
--- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -197,37 +197,7 @@
return 0;
}
-static long __init mpc86xx_time_init(void)
-{
- unsigned int temp;
-
- /* Set the time base to zero */
- mtspr(SPRN_TBWL, 0);
- mtspr(SPRN_TBWU, 0);
-
- temp = mfspr(SPRN_HID0);
- temp |= HID0_TBEN;
- mtspr(SPRN_HID0, temp);
- asm volatile("isync");
-
- return 0;
-}
-
-static const struct of_device_id of_bus_ids[] __initconst = {
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- { .compatible = "fsl,mpc8641-pcie", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- printk(KERN_DEBUG "Probe platform devices\n");
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
- return 0;
-}
-machine_arch_initcall(gef_ppc9a, declare_of_platform_devices);
+machine_arch_initcall(gef_ppc9a, mpc86xx_common_publish_devices);
define_machine(gef_ppc9a) {
.name = "GE PPC9A",
diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c
index 8facf58..0e0be94 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc310.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc310.c
@@ -184,37 +184,7 @@
return 0;
}
-static long __init mpc86xx_time_init(void)
-{
- unsigned int temp;
-
- /* Set the time base to zero */
- mtspr(SPRN_TBWL, 0);
- mtspr(SPRN_TBWU, 0);
-
- temp = mfspr(SPRN_HID0);
- temp |= HID0_TBEN;
- mtspr(SPRN_HID0, temp);
- asm volatile("isync");
-
- return 0;
-}
-
-static const struct of_device_id of_bus_ids[] __initconst = {
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- { .compatible = "fsl,mpc8641-pcie", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- printk(KERN_DEBUG "Probe platform devices\n");
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
- return 0;
-}
-machine_arch_initcall(gef_sbc310, declare_of_platform_devices);
+machine_arch_initcall(gef_sbc310, mpc86xx_common_publish_devices);
define_machine(gef_sbc310) {
.name = "GE SBC310",
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
index 8c9058d..e8292b4 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc610.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -174,37 +174,7 @@
return 0;
}
-static long __init mpc86xx_time_init(void)
-{
- unsigned int temp;
-
- /* Set the time base to zero */
- mtspr(SPRN_TBWL, 0);
- mtspr(SPRN_TBWU, 0);
-
- temp = mfspr(SPRN_HID0);
- temp |= HID0_TBEN;
- mtspr(SPRN_HID0, temp);
- asm volatile("isync");
-
- return 0;
-}
-
-static const struct of_device_id of_bus_ids[] __initconst = {
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- { .compatible = "fsl,mpc8641-pcie", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- printk(KERN_DEBUG "Probe platform devices\n");
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
- return 0;
-}
-machine_arch_initcall(gef_sbc610, declare_of_platform_devices);
+machine_arch_initcall(gef_sbc610, mpc86xx_common_publish_devices);
define_machine(gef_sbc610) {
.name = "GE SBC610",
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 437a9c3..957473e 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -88,12 +88,10 @@
static const struct of_device_id mpc8610_ids[] __initconst = {
{ .compatible = "fsl,mpc8610-immr", },
{ .compatible = "fsl,mpc8610-guts", },
- { .compatible = "simple-bus", },
/* So that the DMA channel nodes can be probed individually: */
{ .compatible = "fsl,eloplus-dma", },
/* PCI controllers */
{ .compatible = "fsl,mpc8610-pci", },
- { .compatible = "fsl,mpc8641-pcie", },
{}
};
@@ -105,6 +103,8 @@
/* Enable wakeup on PIXIS' event IRQ. */
mpc8610_suspend_init();
+ mpc86xx_common_publish_devices();
+
/* Without this call, the SSI device driver won't get probed. */
of_platform_bus_probe(NULL, mpc8610_ids, NULL);
@@ -327,22 +327,6 @@
return 0;
}
-static long __init mpc86xx_time_init(void)
-{
- unsigned int temp;
-
- /* Set the time base to zero */
- mtspr(SPRN_TBWL, 0);
- mtspr(SPRN_TBWU, 0);
-
- temp = mfspr(SPRN_HID0);
- temp |= HID0_TBEN;
- mtspr(SPRN_HID0, temp);
- asm volatile("isync");
-
- return 0;
-}
-
define_machine(mpc86xx_hpcd) {
.name = "MPC86xx HPCD",
.probe = mpc86xx_hpcd_probe,
diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h b/arch/powerpc/platforms/86xx/mpc86xx.h
index 08efb57..53500db 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx.h
+++ b/arch/powerpc/platforms/86xx/mpc86xx.h
@@ -17,5 +17,7 @@
extern void mpc86xx_smp_init(void);
extern void mpc86xx_init_irq(void);
+extern long mpc86xx_time_init(void);
+extern int mpc86xx_common_publish_devices(void);
#endif /* __MPC86XX_H__ */
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 07ccb1b..e508481 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -110,33 +110,14 @@
return 0;
}
-static long __init
-mpc86xx_time_init(void)
-{
- unsigned int temp;
-
- /* Set the time base to zero */
- mtspr(SPRN_TBWL, 0);
- mtspr(SPRN_TBWU, 0);
-
- temp = mfspr(SPRN_HID0);
- temp |= HID0_TBEN;
- mtspr(SPRN_HID0, temp);
- asm volatile("isync");
-
- return 0;
-}
-
static const struct of_device_id of_bus_ids[] __initconst = {
- { .compatible = "simple-bus", },
{ .compatible = "fsl,srio", },
- { .compatible = "gianfar", },
- { .compatible = "fsl,mpc8641-pcie", },
{},
};
static int __init declare_of_platform_devices(void)
{
+ mpc86xx_common_publish_devices();
of_platform_bus_probe(NULL, of_bus_ids, NULL);
return 0;
diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c
index 6810b71..2a9cf27 100644
--- a/arch/powerpc/platforms/86xx/sbc8641d.c
+++ b/arch/powerpc/platforms/86xx/sbc8641d.c
@@ -75,37 +75,7 @@
return 0;
}
-static long __init
-mpc86xx_time_init(void)
-{
- unsigned int temp;
-
- /* Set the time base to zero */
- mtspr(SPRN_TBWL, 0);
- mtspr(SPRN_TBWU, 0);
-
- temp = mfspr(SPRN_HID0);
- temp |= HID0_TBEN;
- mtspr(SPRN_HID0, temp);
- asm volatile("isync");
-
- return 0;
-}
-
-static const struct of_device_id of_bus_ids[] __initconst = {
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- { .compatible = "fsl,mpc8641-pcie", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
- return 0;
-}
-machine_arch_initcall(sbc8641, declare_of_platform_devices);
+machine_arch_initcall(sbc8641, mpc86xx_common_publish_devices);
define_machine(sbc8641) {
.name = "SBC8641D",
diff --git a/arch/powerpc/platforms/embedded6xx/mpc10x.h b/arch/powerpc/platforms/embedded6xx/mpc10x.h
index b290b63..5ad1202 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc10x.h
+++ b/arch/powerpc/platforms/embedded6xx/mpc10x.h
@@ -24,13 +24,11 @@
* Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff
* Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff
* PCI MEM: 0x80000000 -> Processor System Memory: 0x00000000
- * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
*
* MAP B (CHRP Map)
* Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff
* Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff
* PCI MEM: 0x00000000 -> Processor System Memory: 0x00000000
- * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
*/
/*
@@ -138,14 +136,6 @@
#define MPC10X_EUMB_WP_OFFSET 0x000ff000 /* Data path diagnostic, watchpoint reg offset */
#define MPC10X_EUMB_WP_SIZE 0x00001000 /* Data path diagnostic, watchpoint reg size */
-/*
- * Define some recommended places to put the EUMB regs.
- * For both maps, recommend putting the EUMB from 0xeff00000 to 0xefffffff.
- */
-extern unsigned long ioremap_base;
-#define MPC10X_MAPA_EUMB_BASE (ioremap_base - MPC10X_EUMB_SIZE)
-#define MPC10X_MAPB_EUMB_BASE MPC10X_MAPA_EUMB_BASE
-
enum ppc_sys_devices {
MPC10X_IIC1,
MPC10X_DMA0,
diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig
index a19332a3..52dc165 100644
--- a/arch/powerpc/sysdev/Kconfig
+++ b/arch/powerpc/sysdev/Kconfig
@@ -40,3 +40,8 @@
config GE_FPGA
bool
default n
+
+config FSL_CORENET_RCPM
+ bool
+ help
+ This option enables support for RCPM (Run Control/Power Management).
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index bd6bd72..a254824 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -20,6 +20,7 @@
obj-$(CONFIG_FSL_SOC) += fsl_soc.o fsl_mpic_err.o
obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y)
obj-$(CONFIG_FSL_PMC) += fsl_pmc.o
+obj-$(CONFIG_FSL_CORENET_RCPM) += fsl_rcpm.o
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
obj-$(CONFIG_FSL_GTM) += fsl_gtm.o
obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 5e6ff38..8ed6536 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -228,7 +228,10 @@
* Bit 25, FAM can also be set to use FEC aggressive mode (860T).
*/
siu_conf = immr_map(im_siu_conf);
- out_be32(&siu_conf->sc_sdcr, 1);
+ if ((mfspr(SPRN_IMMR) & 0xffff) == 0x0900) /* MPC885 */
+ out_be32(&siu_conf->sc_sdcr, 0x40);
+ else
+ out_be32(&siu_conf->sc_sdcr, 1);
immr_unmap(siu_conf);
cpm_muram_init();
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
index 47f7810..424b67f 100644
--- a/arch/powerpc/sysdev/fsl_lbc.c
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -27,6 +27,7 @@
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/mod_devicetable.h>
+#include <linux/syscore_ops.h>
#include <asm/prom.h>
#include <asm/fsl_lbc.h>
@@ -352,24 +353,42 @@
#ifdef CONFIG_SUSPEND
/* save lbc registers */
-static int fsl_lbc_suspend(struct platform_device *pdev, pm_message_t state)
+static int fsl_lbc_syscore_suspend(void)
{
- struct fsl_lbc_ctrl *ctrl = dev_get_drvdata(&pdev->dev);
- struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_ctrl *ctrl;
+ struct fsl_lbc_regs __iomem *lbc;
+
+ ctrl = fsl_lbc_ctrl_dev;
+ if (!ctrl)
+ goto out;
+
+ lbc = ctrl->regs;
+ if (!lbc)
+ goto out;
ctrl->saved_regs = kmalloc(sizeof(struct fsl_lbc_regs), GFP_KERNEL);
if (!ctrl->saved_regs)
return -ENOMEM;
_memcpy_fromio(ctrl->saved_regs, lbc, sizeof(struct fsl_lbc_regs));
+
+out:
return 0;
}
/* restore lbc registers */
-static int fsl_lbc_resume(struct platform_device *pdev)
+static void fsl_lbc_syscore_resume(void)
{
- struct fsl_lbc_ctrl *ctrl = dev_get_drvdata(&pdev->dev);
- struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_ctrl *ctrl;
+ struct fsl_lbc_regs __iomem *lbc;
+
+ ctrl = fsl_lbc_ctrl_dev;
+ if (!ctrl)
+ goto out;
+
+ lbc = ctrl->regs;
+ if (!lbc)
+ goto out;
if (ctrl->saved_regs) {
_memcpy_toio(lbc, ctrl->saved_regs,
@@ -377,7 +396,9 @@
kfree(ctrl->saved_regs);
ctrl->saved_regs = NULL;
}
- return 0;
+
+out:
+ return;
}
#endif /* CONFIG_SUSPEND */
@@ -389,20 +410,26 @@
{},
};
+#ifdef CONFIG_SUSPEND
+static struct syscore_ops lbc_syscore_pm_ops = {
+ .suspend = fsl_lbc_syscore_suspend,
+ .resume = fsl_lbc_syscore_resume,
+};
+#endif
+
static struct platform_driver fsl_lbc_ctrl_driver = {
.driver = {
.name = "fsl-lbc",
.of_match_table = fsl_lbc_match,
},
.probe = fsl_lbc_ctrl_probe,
-#ifdef CONFIG_SUSPEND
- .suspend = fsl_lbc_suspend,
- .resume = fsl_lbc_resume,
-#endif
};
static int __init fsl_lbc_init(void)
{
+#ifdef CONFIG_SUSPEND
+ register_syscore_ops(&lbc_syscore_pm_ops);
+#endif
return platform_driver_register(&fsl_lbc_ctrl_driver);
}
subsys_initcall(fsl_lbc_init);
diff --git a/arch/powerpc/sysdev/fsl_rcpm.c b/arch/powerpc/sysdev/fsl_rcpm.c
new file mode 100644
index 0000000..656d9ca
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_rcpm.c
@@ -0,0 +1,385 @@
+/*
+ * RCPM(Run Control/Power Management) support
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * Author: Chenhui Zhao <chenhui.zhao@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/of_address.h>
+#include <linux/export.h>
+
+#include <asm/io.h>
+#include <linux/fsl/guts.h>
+#include <asm/cputhreads.h>
+#include <asm/fsl_pm.h>
+
+static struct ccsr_rcpm_v1 __iomem *rcpm_v1_regs;
+static struct ccsr_rcpm_v2 __iomem *rcpm_v2_regs;
+static unsigned int fsl_supported_pm_modes;
+
+static void rcpm_v1_irq_mask(int cpu)
+{
+ int hw_cpu = get_hard_smp_processor_id(cpu);
+ unsigned int mask = 1 << hw_cpu;
+
+ setbits32(&rcpm_v1_regs->cpmimr, mask);
+ setbits32(&rcpm_v1_regs->cpmcimr, mask);
+ setbits32(&rcpm_v1_regs->cpmmcmr, mask);
+ setbits32(&rcpm_v1_regs->cpmnmimr, mask);
+}
+
+static void rcpm_v2_irq_mask(int cpu)
+{
+ int hw_cpu = get_hard_smp_processor_id(cpu);
+ unsigned int mask = 1 << hw_cpu;
+
+ setbits32(&rcpm_v2_regs->tpmimr0, mask);
+ setbits32(&rcpm_v2_regs->tpmcimr0, mask);
+ setbits32(&rcpm_v2_regs->tpmmcmr0, mask);
+ setbits32(&rcpm_v2_regs->tpmnmimr0, mask);
+}
+
+static void rcpm_v1_irq_unmask(int cpu)
+{
+ int hw_cpu = get_hard_smp_processor_id(cpu);
+ unsigned int mask = 1 << hw_cpu;
+
+ clrbits32(&rcpm_v1_regs->cpmimr, mask);
+ clrbits32(&rcpm_v1_regs->cpmcimr, mask);
+ clrbits32(&rcpm_v1_regs->cpmmcmr, mask);
+ clrbits32(&rcpm_v1_regs->cpmnmimr, mask);
+}
+
+static void rcpm_v2_irq_unmask(int cpu)
+{
+ int hw_cpu = get_hard_smp_processor_id(cpu);
+ unsigned int mask = 1 << hw_cpu;
+
+ clrbits32(&rcpm_v2_regs->tpmimr0, mask);
+ clrbits32(&rcpm_v2_regs->tpmcimr0, mask);
+ clrbits32(&rcpm_v2_regs->tpmmcmr0, mask);
+ clrbits32(&rcpm_v2_regs->tpmnmimr0, mask);
+}
+
+static void rcpm_v1_set_ip_power(bool enable, u32 mask)
+{
+ if (enable)
+ setbits32(&rcpm_v1_regs->ippdexpcr, mask);
+ else
+ clrbits32(&rcpm_v1_regs->ippdexpcr, mask);
+}
+
+static void rcpm_v2_set_ip_power(bool enable, u32 mask)
+{
+ if (enable)
+ setbits32(&rcpm_v2_regs->ippdexpcr[0], mask);
+ else
+ clrbits32(&rcpm_v2_regs->ippdexpcr[0], mask);
+}
+
+static void rcpm_v1_cpu_enter_state(int cpu, int state)
+{
+ int hw_cpu = get_hard_smp_processor_id(cpu);
+ unsigned int mask = 1 << hw_cpu;
+
+ switch (state) {
+ case E500_PM_PH10:
+ setbits32(&rcpm_v1_regs->cdozcr, mask);
+ break;
+ case E500_PM_PH15:
+ setbits32(&rcpm_v1_regs->cnapcr, mask);
+ break;
+ default:
+ pr_warn("Unknown cpu PM state (%d)\n", state);
+ break;
+ }
+}
+
+static void rcpm_v2_cpu_enter_state(int cpu, int state)
+{
+ int hw_cpu = get_hard_smp_processor_id(cpu);
+ u32 mask = 1 << cpu_core_index_of_thread(cpu);
+
+ switch (state) {
+ case E500_PM_PH10:
+ /* one bit corresponds to one thread for PH10 of 6500 */
+ setbits32(&rcpm_v2_regs->tph10setr0, 1 << hw_cpu);
+ break;
+ case E500_PM_PH15:
+ setbits32(&rcpm_v2_regs->pcph15setr, mask);
+ break;
+ case E500_PM_PH20:
+ setbits32(&rcpm_v2_regs->pcph20setr, mask);
+ break;
+ case E500_PM_PH30:
+ setbits32(&rcpm_v2_regs->pcph30setr, mask);
+ break;
+ default:
+ pr_warn("Unknown cpu PM state (%d)\n", state);
+ }
+}
+
+static void rcpm_v1_cpu_die(int cpu)
+{
+ rcpm_v1_cpu_enter_state(cpu, E500_PM_PH15);
+}
+
+#ifdef CONFIG_PPC64
+static void qoriq_disable_thread(int cpu)
+{
+ int thread = cpu_thread_in_core(cpu);
+
+ book3e_stop_thread(thread);
+}
+#endif
+
+static void rcpm_v2_cpu_die(int cpu)
+{
+#ifdef CONFIG_PPC64
+ int primary;
+
+ if (threads_per_core == 2) {
+ primary = cpu_first_thread_sibling(cpu);
+ if (cpu_is_offline(primary) && cpu_is_offline(primary + 1)) {
+ /* if both threads are offline, put the cpu in PH20 */
+ rcpm_v2_cpu_enter_state(cpu, E500_PM_PH20);
+ } else {
+ /* if only one thread is offline, disable the thread */
+ qoriq_disable_thread(cpu);
+ }
+ }
+#endif
+
+ if (threads_per_core == 1)
+ rcpm_v2_cpu_enter_state(cpu, E500_PM_PH20);
+}
+
+static void rcpm_v1_cpu_exit_state(int cpu, int state)
+{
+ int hw_cpu = get_hard_smp_processor_id(cpu);
+ unsigned int mask = 1 << hw_cpu;
+
+ switch (state) {
+ case E500_PM_PH10:
+ clrbits32(&rcpm_v1_regs->cdozcr, mask);
+ break;
+ case E500_PM_PH15:
+ clrbits32(&rcpm_v1_regs->cnapcr, mask);
+ break;
+ default:
+ pr_warn("Unknown cpu PM state (%d)\n", state);
+ break;
+ }
+}
+
+static void rcpm_v1_cpu_up_prepare(int cpu)
+{
+ rcpm_v1_cpu_exit_state(cpu, E500_PM_PH15);
+ rcpm_v1_irq_unmask(cpu);
+}
+
+static void rcpm_v2_cpu_exit_state(int cpu, int state)
+{
+ int hw_cpu = get_hard_smp_processor_id(cpu);
+ u32 mask = 1 << cpu_core_index_of_thread(cpu);
+
+ switch (state) {
+ case E500_PM_PH10:
+ setbits32(&rcpm_v2_regs->tph10clrr0, 1 << hw_cpu);
+ break;
+ case E500_PM_PH15:
+ setbits32(&rcpm_v2_regs->pcph15clrr, mask);
+ break;
+ case E500_PM_PH20:
+ setbits32(&rcpm_v2_regs->pcph20clrr, mask);
+ break;
+ case E500_PM_PH30:
+ setbits32(&rcpm_v2_regs->pcph30clrr, mask);
+ break;
+ default:
+ pr_warn("Unknown cpu PM state (%d)\n", state);
+ }
+}
+
+static void rcpm_v2_cpu_up_prepare(int cpu)
+{
+ rcpm_v2_cpu_exit_state(cpu, E500_PM_PH20);
+ rcpm_v2_irq_unmask(cpu);
+}
+
+static int rcpm_v1_plat_enter_state(int state)
+{
+ u32 *pmcsr_reg = &rcpm_v1_regs->powmgtcsr;
+ int ret = 0;
+ int result;
+
+ switch (state) {
+ case PLAT_PM_SLEEP:
+ setbits32(pmcsr_reg, RCPM_POWMGTCSR_SLP);
+
+ /* Upon resume, wait for RCPM_POWMGTCSR_SLP bit to be clear. */
+ result = spin_event_timeout(
+ !(in_be32(pmcsr_reg) & RCPM_POWMGTCSR_SLP), 10000, 10);
+ if (!result) {
+ pr_err("timeout waiting for SLP bit to be cleared\n");
+ ret = -ETIMEDOUT;
+ }
+ break;
+ default:
+ pr_warn("Unknown platform PM state (%d)", state);
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int rcpm_v2_plat_enter_state(int state)
+{
+ u32 *pmcsr_reg = &rcpm_v2_regs->powmgtcsr;
+ int ret = 0;
+ int result;
+
+ switch (state) {
+ case PLAT_PM_LPM20:
+ /* clear previous LPM20 status */
+ setbits32(pmcsr_reg, RCPM_POWMGTCSR_P_LPM20_ST);
+ /* enter LPM20 status */
+ setbits32(pmcsr_reg, RCPM_POWMGTCSR_LPM20_RQ);
+
+ /* At this point, the device is in LPM20 status. */
+
+ /* resume ... */
+ result = spin_event_timeout(
+ !(in_be32(pmcsr_reg) & RCPM_POWMGTCSR_LPM20_ST), 10000, 10);
+ if (!result) {
+ pr_err("timeout waiting for LPM20 bit to be cleared\n");
+ ret = -ETIMEDOUT;
+ }
+ break;
+ default:
+ pr_warn("Unknown platform PM state (%d)\n", state);
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int rcpm_v1_plat_enter_sleep(void)
+{
+ return rcpm_v1_plat_enter_state(PLAT_PM_SLEEP);
+}
+
+static int rcpm_v2_plat_enter_sleep(void)
+{
+ return rcpm_v2_plat_enter_state(PLAT_PM_LPM20);
+}
+
+static void rcpm_common_freeze_time_base(u32 *tben_reg, int freeze)
+{
+ static u32 mask;
+
+ if (freeze) {
+ mask = in_be32(tben_reg);
+ clrbits32(tben_reg, mask);
+ } else {
+ setbits32(tben_reg, mask);
+ }
+
+ /* read back to push the previous write */
+ in_be32(tben_reg);
+}
+
+static void rcpm_v1_freeze_time_base(bool freeze)
+{
+ rcpm_common_freeze_time_base(&rcpm_v1_regs->ctbenr, freeze);
+}
+
+static void rcpm_v2_freeze_time_base(bool freeze)
+{
+ rcpm_common_freeze_time_base(&rcpm_v2_regs->pctbenr, freeze);
+}
+
+static unsigned int rcpm_get_pm_modes(void)
+{
+ return fsl_supported_pm_modes;
+}
+
+static const struct fsl_pm_ops qoriq_rcpm_v1_ops = {
+ .irq_mask = rcpm_v1_irq_mask,
+ .irq_unmask = rcpm_v1_irq_unmask,
+ .cpu_enter_state = rcpm_v1_cpu_enter_state,
+ .cpu_exit_state = rcpm_v1_cpu_exit_state,
+ .cpu_up_prepare = rcpm_v1_cpu_up_prepare,
+ .cpu_die = rcpm_v1_cpu_die,
+ .plat_enter_sleep = rcpm_v1_plat_enter_sleep,
+ .set_ip_power = rcpm_v1_set_ip_power,
+ .freeze_time_base = rcpm_v1_freeze_time_base,
+ .get_pm_modes = rcpm_get_pm_modes,
+};
+
+static const struct fsl_pm_ops qoriq_rcpm_v2_ops = {
+ .irq_mask = rcpm_v2_irq_mask,
+ .irq_unmask = rcpm_v2_irq_unmask,
+ .cpu_enter_state = rcpm_v2_cpu_enter_state,
+ .cpu_exit_state = rcpm_v2_cpu_exit_state,
+ .cpu_up_prepare = rcpm_v2_cpu_up_prepare,
+ .cpu_die = rcpm_v2_cpu_die,
+ .plat_enter_sleep = rcpm_v2_plat_enter_sleep,
+ .set_ip_power = rcpm_v2_set_ip_power,
+ .freeze_time_base = rcpm_v2_freeze_time_base,
+ .get_pm_modes = rcpm_get_pm_modes,
+};
+
+static const struct of_device_id rcpm_matches[] = {
+ {
+ .compatible = "fsl,qoriq-rcpm-1.0",
+ .data = &qoriq_rcpm_v1_ops,
+ },
+ {
+ .compatible = "fsl,qoriq-rcpm-2.0",
+ .data = &qoriq_rcpm_v2_ops,
+ },
+ {
+ .compatible = "fsl,qoriq-rcpm-2.1",
+ .data = &qoriq_rcpm_v2_ops,
+ },
+ {},
+};
+
+int __init fsl_rcpm_init(void)
+{
+ struct device_node *np;
+ const struct of_device_id *match;
+ void __iomem *base;
+
+ np = of_find_matching_node_and_match(NULL, rcpm_matches, &match);
+ if (!np)
+ return 0;
+
+ base = of_iomap(np, 0);
+ of_node_put(np);
+ if (!base) {
+ pr_err("of_iomap() error.\n");
+ return -ENOMEM;
+ }
+
+ rcpm_v1_regs = base;
+ rcpm_v2_regs = base;
+
+ /* support sleep by default */
+ fsl_supported_pm_modes = FSL_PM_SLEEP;
+
+ qoriq_pm_ops = match->data;
+
+ return 0;
+}
diff --git a/drivers/soc/fsl/qe/qe_common.c b/drivers/soc/fsl/qe/qe_common.c
index 419fa5b..41eff80 100644
--- a/drivers/soc/fsl/qe/qe_common.c
+++ b/drivers/soc/fsl/qe/qe_common.c
@@ -103,6 +103,39 @@
}
/*
+ * cpm_muram_alloc_common - cpm_muram_alloc common code
+ * @size: number of bytes to allocate
+ * @algo: algorithm for alloc.
+ * @data: data for genalloc's algorithm.
+ *
+ * This function returns an offset into the muram area.
+ */
+static unsigned long cpm_muram_alloc_common(unsigned long size,
+ genpool_algo_t algo, void *data)
+{
+ struct muram_block *entry;
+ unsigned long start;
+
+ start = gen_pool_alloc_algo(muram_pool, size, algo, data);
+ if (!start)
+ goto out2;
+ start = start - GENPOOL_OFFSET;
+ memset_io(cpm_muram_addr(start), 0, size);
+ entry = kmalloc(sizeof(*entry), GFP_ATOMIC);
+ if (!entry)
+ goto out1;
+ entry->start = start;
+ entry->size = size;
+ list_add(&entry->head, &muram_block_list);
+
+ return start;
+out1:
+ gen_pool_free(muram_pool, start, size);
+out2:
+ return (unsigned long)-ENOMEM;
+}
+
+/*
* cpm_muram_alloc - allocate the requested size worth of multi-user ram
* @size: number of bytes to allocate
* @align: requested alignment, in bytes
@@ -175,39 +208,6 @@
}
EXPORT_SYMBOL(cpm_muram_alloc_fixed);
-/*
- * cpm_muram_alloc_common - cpm_muram_alloc common code
- * @size: number of bytes to allocate
- * @algo: algorithm for alloc.
- * @data: data for genalloc's algorithm.
- *
- * This function returns an offset into the muram area.
- */
-unsigned long cpm_muram_alloc_common(unsigned long size, genpool_algo_t algo,
- void *data)
-{
- struct muram_block *entry;
- unsigned long start;
-
- start = gen_pool_alloc_algo(muram_pool, size, algo, data);
- if (!start)
- goto out2;
- start = start - GENPOOL_OFFSET;
- memset_io(cpm_muram_addr(start), 0, size);
- entry = kmalloc(sizeof(*entry), GFP_KERNEL);
- if (!entry)
- goto out1;
- entry->start = start;
- entry->size = size;
- list_add(&entry->head, &muram_block_list);
-
- return start;
-out1:
- gen_pool_free(muram_pool, start, size);
-out2:
- return (unsigned long)-ENOMEM;
-}
-
/**
* cpm_muram_addr - turn a muram offset into a virtual address
* @offset: muram offset to convert
diff --git a/drivers/soc/fsl/qe/qe_ic.c b/drivers/soc/fsl/qe/qe_ic.c
index b77d01f..ec2ca86 100644
--- a/drivers/soc/fsl/qe/qe_ic.c
+++ b/drivers/soc/fsl/qe/qe_ic.c
@@ -259,6 +259,11 @@
struct qe_ic *qe_ic = h->host_data;
struct irq_chip *chip;
+ if (hw >= ARRAY_SIZE(qe_ic_info)) {
+ pr_err("%s: Invalid hw irq number for QEIC\n", __func__);
+ return -EINVAL;
+ }
+
if (qe_ic_info[hw].mask == 0) {
printk(KERN_ERR "Can't map reserved IRQ\n");
return -EINVAL;
@@ -407,7 +412,8 @@
if (priority > 8 || priority == 0)
return -EINVAL;
- if (src > 127)
+ if (WARN_ONCE(src >= ARRAY_SIZE(qe_ic_info),
+ "%s: Invalid hw irq number for QEIC\n", __func__))
return -EINVAL;
if (qe_ic_info[src].pri_reg == 0)
return -EINVAL;
@@ -436,6 +442,9 @@
if (priority > 2 || priority == 0)
return -EINVAL;
+ if (WARN_ONCE(src >= ARRAY_SIZE(qe_ic_info),
+ "%s: Invalid hw irq number for QEIC\n", __func__))
+ return -EINVAL;
switch (qe_ic_info[src].pri_reg) {
case QEIC_CIPZCC:
diff --git a/include/linux/fsl/guts.h b/include/linux/fsl/guts.h
index 84d971f..649e917 100644
--- a/include/linux/fsl/guts.h
+++ b/include/linux/fsl/guts.h
@@ -189,4 +189,109 @@
#endif
+struct ccsr_rcpm_v1 {
+ u8 res0000[4];
+ __be32 cdozsr; /* 0x0004 Core Doze Status Register */
+ u8 res0008[4];
+ __be32 cdozcr; /* 0x000c Core Doze Control Register */
+ u8 res0010[4];
+ __be32 cnapsr; /* 0x0014 Core Nap Status Register */
+ u8 res0018[4];
+ __be32 cnapcr; /* 0x001c Core Nap Control Register */
+ u8 res0020[4];
+ __be32 cdozpsr; /* 0x0024 Core Doze Previous Status Register */
+ u8 res0028[4];
+ __be32 cnappsr; /* 0x002c Core Nap Previous Status Register */
+ u8 res0030[4];
+ __be32 cwaitsr; /* 0x0034 Core Wait Status Register */
+ u8 res0038[4];
+ __be32 cwdtdsr; /* 0x003c Core Watchdog Detect Status Register */
+ __be32 powmgtcsr; /* 0x0040 PM Control&Status Register */
+#define RCPM_POWMGTCSR_SLP 0x00020000
+ u8 res0044[12];
+ __be32 ippdexpcr; /* 0x0050 IP Powerdown Exception Control Register */
+ u8 res0054[16];
+ __be32 cpmimr; /* 0x0064 Core PM IRQ Mask Register */
+ u8 res0068[4];
+ __be32 cpmcimr; /* 0x006c Core PM Critical IRQ Mask Register */
+ u8 res0070[4];
+ __be32 cpmmcmr; /* 0x0074 Core PM Machine Check Mask Register */
+ u8 res0078[4];
+ __be32 cpmnmimr; /* 0x007c Core PM NMI Mask Register */
+ u8 res0080[4];
+ __be32 ctbenr; /* 0x0084 Core Time Base Enable Register */
+ u8 res0088[4];
+ __be32 ctbckselr; /* 0x008c Core Time Base Clock Select Register */
+ u8 res0090[4];
+ __be32 ctbhltcr; /* 0x0094 Core Time Base Halt Control Register */
+ u8 res0098[4];
+ __be32 cmcpmaskcr; /* 0x00a4 Core Machine Check Mask Register */
+};
+
+struct ccsr_rcpm_v2 {
+ u8 res_00[12];
+ __be32 tph10sr0; /* Thread PH10 Status Register */
+ u8 res_10[12];
+ __be32 tph10setr0; /* Thread PH10 Set Control Register */
+ u8 res_20[12];
+ __be32 tph10clrr0; /* Thread PH10 Clear Control Register */
+ u8 res_30[12];
+ __be32 tph10psr0; /* Thread PH10 Previous Status Register */
+ u8 res_40[12];
+ __be32 twaitsr0; /* Thread Wait Status Register */
+ u8 res_50[96];
+ __be32 pcph15sr; /* Physical Core PH15 Status Register */
+ __be32 pcph15setr; /* Physical Core PH15 Set Control Register */
+ __be32 pcph15clrr; /* Physical Core PH15 Clear Control Register */
+ __be32 pcph15psr; /* Physical Core PH15 Prev Status Register */
+ u8 res_c0[16];
+ __be32 pcph20sr; /* Physical Core PH20 Status Register */
+ __be32 pcph20setr; /* Physical Core PH20 Set Control Register */
+ __be32 pcph20clrr; /* Physical Core PH20 Clear Control Register */
+ __be32 pcph20psr; /* Physical Core PH20 Prev Status Register */
+ __be32 pcpw20sr; /* Physical Core PW20 Status Register */
+ u8 res_e0[12];
+ __be32 pcph30sr; /* Physical Core PH30 Status Register */
+ __be32 pcph30setr; /* Physical Core PH30 Set Control Register */
+ __be32 pcph30clrr; /* Physical Core PH30 Clear Control Register */
+ __be32 pcph30psr; /* Physical Core PH30 Prev Status Register */
+ u8 res_100[32];
+ __be32 ippwrgatecr; /* IP Power Gating Control Register */
+ u8 res_124[12];
+ __be32 powmgtcsr; /* Power Management Control & Status Reg */
+#define RCPM_POWMGTCSR_LPM20_RQ 0x00100000
+#define RCPM_POWMGTCSR_LPM20_ST 0x00000200
+#define RCPM_POWMGTCSR_P_LPM20_ST 0x00000100
+ u8 res_134[12];
+ __be32 ippdexpcr[4]; /* IP Powerdown Exception Control Reg */
+ u8 res_150[12];
+ __be32 tpmimr0; /* Thread PM Interrupt Mask Reg */
+ u8 res_160[12];
+ __be32 tpmcimr0; /* Thread PM Crit Interrupt Mask Reg */
+ u8 res_170[12];
+ __be32 tpmmcmr0; /* Thread PM Machine Check Interrupt Mask Reg */
+ u8 res_180[12];
+ __be32 tpmnmimr0; /* Thread PM NMI Mask Reg */
+ u8 res_190[12];
+ __be32 tmcpmaskcr0; /* Thread Machine Check Mask Control Reg */
+ __be32 pctbenr; /* Physical Core Time Base Enable Reg */
+ __be32 pctbclkselr; /* Physical Core Time Base Clock Select */
+ __be32 tbclkdivr; /* Time Base Clock Divider Register */
+ u8 res_1ac[4];
+ __be32 ttbhltcr[4]; /* Thread Time Base Halt Control Register */
+ __be32 clpcl10sr; /* Cluster PCL10 Status Register */
+ __be32 clpcl10setr; /* Cluster PCL30 Set Control Register */
+ __be32 clpcl10clrr; /* Cluster PCL30 Clear Control Register */
+ __be32 clpcl10psr; /* Cluster PCL30 Prev Status Register */
+ __be32 cddslpsetr; /* Core Domain Deep Sleep Set Register */
+ __be32 cddslpclrr; /* Core Domain Deep Sleep Clear Register */
+ __be32 cdpwroksetr; /* Core Domain Power OK Set Register */
+ __be32 cdpwrokclrr; /* Core Domain Power OK Clear Register */
+ __be32 cdpwrensr; /* Core Domain Power Enable Status Register */
+ __be32 cddslsr; /* Core Domain Deep Sleep Status Register */
+ u8 res_1e8[8];
+ __be32 dslpcntcr[8]; /* Deep Sleep Counter Cfg Register */
+ u8 res_300[3568];
+};
+
#endif
diff --git a/include/soc/fsl/qe/qe.h b/include/soc/fsl/qe/qe.h
index c7fa36c..33b29ea 100644
--- a/include/soc/fsl/qe/qe.h
+++ b/include/soc/fsl/qe/qe.h
@@ -103,8 +103,6 @@
unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
int cpm_muram_free(unsigned long offset);
unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
-unsigned long cpm_muram_alloc_common(unsigned long size, genpool_algo_t algo,
- void *data);
void __iomem *cpm_muram_addr(unsigned long offset);
unsigned long cpm_muram_offset(void __iomem *addr);
dma_addr_t cpm_muram_dma(void __iomem *addr);