USB: storage: fixed several trailing white spaces issues.
Fixed several trailing white spaces issues found
by checkpatch.pl tool in drivers/usb/storage/usb.c
Signed-off-by: Jeffrin Jose <ahiliation@yahoo.co.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 7ad1a8b..16d49da 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -121,7 +121,7 @@
}
static struct us_unusual_dev us_unusual_dev_list[] = {
-# include "unusual_devs.h"
+# include "unusual_devs.h"
{ } /* Terminating entry */
};
@@ -261,7 +261,7 @@
void fill_inquiry_response(struct us_data *us, unsigned char *data,
unsigned int data_len)
{
- if (data_len<36) /* You lose. */
+ if (data_len < 36) /* You lose. */
return;
memset(data+8, ' ', 28);
@@ -271,7 +271,7 @@
to this logical unit") and leave vendor and
product identification empty. ("If the target
does store some of the INQUIRY data on the
- device, it may return zeros or ASCII spaces
+ device, it may return zeros or ASCII spaces
(20h) in those fields until the data is
available from the device."). */
} else {
@@ -327,7 +327,7 @@
scsi_unlock(host);
- /* reject the command if the direction indicator
+ /* reject the command if the direction indicator
* is UNKNOWN
*/
if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL) {
@@ -338,7 +338,7 @@
/* reject if target != 0 or if LUN is higher than
* the maximum known LUN
*/
- else if (us->srb->device->id &&
+ else if (us->srb->device->id &&
!(us->fflags & US_FL_SCM_MULT_TARG)) {
US_DEBUGP("Bad target number (%d:%d)\n",
us->srb->device->id, us->srb->device->lun);
@@ -351,7 +351,7 @@
us->srb->result = DID_BAD_TARGET << 16;
}
- /* Handle those devices which need us to fake
+ /* Handle those devices which need us to fake
* their inquiry data */
else if ((us->srb->cmnd[0] == INQUIRY) &&
(us->fflags & US_FL_FIX_INQUIRY)) {
@@ -376,7 +376,7 @@
/* indicate that the command is done */
if (us->srb->result != DID_ABORT << 16) {
- US_DEBUGP("scsi cmd done, result=0x%x\n",
+ US_DEBUGP("scsi cmd done, result=0x%x\n",
us->srb->result);
us->srb->scsi_done(us->srb);
} else {
@@ -414,7 +414,7 @@
}
__set_current_state(TASK_RUNNING);
return 0;
-}
+}
/***********************************************************************
* Device probing and disconnecting
@@ -732,7 +732,7 @@
us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0);
us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev,
usb_endpoint_num(ep_out));
- us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev,
+ us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev,
usb_endpoint_num(ep_in));
if (ep_int) {
us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev,