ide: remove ->init_setup_dma from ide_pci_device_t (take 2)
* Make ide_pci_device_t.host_flags u32 and add IDE_HFLAG_CS5520 host flag.
* Pass ide_pci_device_t *d to setup-pci.c::ide_get_or_set_dma_base()
and use d->name instead of hwif->cds->name.
* Set IDE_HFLAG_CS5520 host flag in cs5520 host driver and use it in
ide_get_or_set_dma_base() to find out which PCI BAR to use, remove no longer
needed cs5520.c::cs5520_init_setup_dma() and ide_pci_device_t.init_setup_dma.
This fixes PCI bus-mastering not being checked for CS5510/CS5520 hosts.
v2:
* It is wrong to check simplex bits on CS5510/CS5520 as v1 did.
(Noticed by Alan).
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 26061fe..479add4 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -147,6 +147,7 @@
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
/**
* ide_get_or_set_dma_base - setup BMIBA
+ * @d: IDE pci device data
* @hwif: Interface
*
* Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space.
@@ -154,7 +155,7 @@
* and enforce IDE simplex rules.
*/
-static unsigned long ide_get_or_set_dma_base (ide_hwif_t *hwif)
+static unsigned long ide_get_or_set_dma_base(ide_pci_device_t *d, ide_hwif_t *hwif)
{
unsigned long dma_base = 0;
struct pci_dev *dev = hwif->pci_dev;
@@ -165,14 +166,15 @@
if (hwif->mate && hwif->mate->dma_base) {
dma_base = hwif->mate->dma_base - (hwif->channel ? 0 : 8);
} else {
- dma_base = pci_resource_start(dev, 4);
- if (!dma_base) {
- printk(KERN_ERR "%s: dma_base is invalid\n",
- hwif->cds->name);
- }
+ u8 baridx = (d->host_flags & IDE_HFLAG_CS5520) ? 2 : 4;
+
+ dma_base = pci_resource_start(dev, baridx);
+
+ if (dma_base == 0)
+ printk(KERN_ERR "%s: DMA base is invalid\n", d->name);
}
- if (dma_base) {
+ if ((d->host_flags & IDE_HFLAG_CS5520) == 0 && dma_base) {
u8 simplex_stat = 0;
dma_base += hwif->channel ? 8 : 0;
@@ -188,8 +190,8 @@
simplex_stat = hwif->INB(dma_base + 2);
if (simplex_stat & 0x80) {
printk(KERN_INFO "%s: simplex device: "
- "DMA forced\n",
- hwif->cds->name);
+ "DMA forced\n",
+ d->name);
}
break;
default:
@@ -212,8 +214,8 @@
*/
if (hwif->mate && hwif->mate->dma_base) {
printk(KERN_INFO "%s: simplex device: "
- "DMA disabled\n",
- hwif->cds->name);
+ "DMA disabled\n",
+ d->name);
dma_base = 0;
}
}
@@ -434,7 +436,7 @@
if ((d->host_flags & IDE_HFLAG_NO_AUTODMA) == 0 ||
((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
(dev->class & 0x80))) {
- unsigned long dma_base = ide_get_or_set_dma_base(hwif);
+ unsigned long dma_base = ide_get_or_set_dma_base(d, hwif);
if (dma_base && !(pcicmd & PCI_COMMAND_MASTER)) {
/*
* Set up BM-DMA capability
@@ -559,14 +561,9 @@
if (d->init_iops)
d->init_iops(hwif);
- if (d->host_flags & IDE_HFLAG_NO_DMA)
- goto bypass_legacy_dma;
-
- if(d->init_setup_dma)
- d->init_setup_dma(dev, d, hwif);
- else
+ if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0)
ide_hwif_setup_dma(dev, d, hwif);
-bypass_legacy_dma:
+
hwif->host_flags = d->host_flags;
hwif->pio_mask = d->pio_mask;