Convert the oxsemi tornado special cases to use the quirk interface and not
scribble on its own reference structures.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 5450a0e..057b532c 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -737,6 +737,38 @@
release_region(ioport, ITE_887x_IOSIZE);
}
+/*
+ * Oxford Semiconductor Inc.
+ * Check that device is part of the Tornado range of devices, then determine
+ * the number of ports available on the device.
+ */
+static int pci_oxsemi_tornado_init(struct pci_dev *dev)
+{
+ u8 __iomem *p;
+ unsigned long deviceID;
+ unsigned int number_uarts = 0;
+
+ /* OxSemi Tornado devices are all 0xCxxx */
+ if (dev->vendor == PCI_VENDOR_ID_OXSEMI &&
+ (dev->device & 0xF000) != 0xC000)
+ return 0;
+
+ p = pci_iomap(dev, 0, 5);
+ if (p == NULL)
+ return -ENOMEM;
+
+ deviceID = ioread32(p);
+ /* Tornado device */
+ if (deviceID == 0x07000200) {
+ number_uarts = ioread8(p + 4);
+ printk(KERN_DEBUG
+ "%d ports detected on Oxford PCI Express device\n",
+ number_uarts);
+ }
+ pci_iounmap(dev, p);
+ return number_uarts;
+}
+
static int
pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
struct uart_port *port, int idx)
@@ -1018,6 +1050,25 @@
.setup = pci_default_setup,
},
/*
+ * For Oxford Semiconductor and Mainpine
+ */
+ {
+ .vendor = PCI_VENDOR_ID_OXSEMI,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_MAINPINE,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_default_setup,
+ },
+ /*
* Default "match everything" terminator entry
*/
{
@@ -1854,39 +1905,6 @@
board->first_offset == guessed->first_offset;
}
-/*
- * Oxford Semiconductor Inc.
- * Check that device is part of the Tornado range of devices, then determine
- * the number of ports available on the device.
- */
-static int pci_oxsemi_tornado_init(struct pci_dev *dev, struct pciserial_board *board)
-{
- u8 __iomem *p;
- unsigned long deviceID;
- unsigned int number_uarts;
-
- /* OxSemi Tornado devices are all 0xCxxx */
- if (dev->vendor == PCI_VENDOR_ID_OXSEMI &&
- (dev->device & 0xF000) != 0xC000)
- return 0;
-
- p = pci_iomap(dev, 0, 5);
- if (p == NULL)
- return -ENOMEM;
-
- deviceID = ioread32(p);
- /* Tornado device */
- if (deviceID == 0x07000200) {
- number_uarts = ioread8(p + 4);
- board->num_ports = number_uarts;
- printk(KERN_DEBUG
- "%d ports detected on Oxford PCI Express device\n",
- number_uarts);
- }
- pci_iounmap(dev, p);
- return 0;
-}
-
struct serial_private *
pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board)
{
@@ -1895,13 +1913,6 @@
struct pci_serial_quirk *quirk;
int rc, nr_ports, i;
- /*
- * Find number of ports on board
- */
- if (dev->vendor == PCI_VENDOR_ID_OXSEMI ||
- dev->vendor == PCI_VENDOR_ID_MAINPINE)
- pci_oxsemi_tornado_init(dev, board);
-
nr_ports = board->num_ports;
/*