Revert "sh_eth: Enable Rx descriptor word 0 shift for r8a7790"
This reverts commit fd9af07c3404ac9ecbd0d859563360f51ce1ffde.
The hardware manual states that the frame error and multicast bits are
copied to bits 9:0 of RD0, not bits 25:16. I've tested that this is
true for RFS1 (CRC error), RFS3 (frame too short), RFS4 (frame too
long) and RFS8 (multicast).
Also adjust a comment to agree with this.
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 3309494..3406cda 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -508,7 +508,6 @@
.tpauser = 1,
.hw_swap = 1,
.rmiimode = 1,
- .shift_rd0 = 1,
};
static void sh_eth_set_rate_sh7724(struct net_device *ndev)
@@ -1462,8 +1461,8 @@
/* In case of almost all GETHER/ETHERs, the Receive Frame State
* (RFS) bits in the Receive Descriptor 0 are from bit 9 to
- * bit 0. However, in case of the R8A7740, R8A779x, and
- * R7S72100 the RFS bits are from bit 25 to bit 16. So, the
+ * bit 0. However, in case of the R8A7740 and R7S72100
+ * the RFS bits are from bit 25 to bit 16. So, the
* driver needs right shifting by 16.
*/
if (mdp->cd->shift_rd0)