arm64: Add software workaround for Falkor erratum 1041
The ARM architecture defines the memory locations that are permitted
to be accessed as the result of a speculative instruction fetch from
an exception level for which all stages of translation are disabled.
Specifically, the core is permitted to speculatively fetch from the
4KB region containing the current program counter 4K and next 4K.
When translation is changed from enabled to disabled for the running
exception level (SCTLR_ELn[M] changed from a value of 1 to 0), the
Falkor core may errantly speculatively access memory locations outside
of the 4KB region permitted by the architecture. The errant memory
access may lead to one of the following unexpected behaviors.
1) A System Error Interrupt (SEI) being raised by the Falkor core due
to the errant memory access attempting to access a region of memory
that is protected by a slave-side memory protection unit.
2) Unpredictable device behavior due to a speculative read from device
memory. This behavior may only occur if the instruction cache is
disabled prior to or coincident with translation being changed from
enabled to disabled.
The conditions leading to this erratum will not occur when either of the
following occur:
1) A higher exception level disables translation of a lower exception level
(e.g. EL2 changing SCTLR_EL1[M] from a value of 1 to 0).
2) An exception level disabling its stage-1 translation if its stage-2
translation is enabled (e.g. EL1 changing SCTLR_EL1[M] from a value of 1
to 0 when HCR_EL2[VM] has a value of 1).
To avoid the errant behavior, software must execute an ISB immediately
prior to executing the MSR that will change SCTLR_ELn[M] from 1 to 0.
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index a93339f..c9a7e9e 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -557,7 +557,6 @@
If unsure, say Y.
-
config SOCIONEXT_SYNQUACER_PREITS
bool "Socionext Synquacer: Workaround for GICv3 pre-ITS"
default y
@@ -576,6 +575,17 @@
a 128kB offset to be applied to the target address in this commands.
If unsure, say Y.
+
+config QCOM_FALKOR_ERRATUM_E1041
+ bool "Falkor E1041: Speculative instruction fetches might cause errant memory access"
+ default y
+ help
+ Falkor CPU may speculatively fetch instructions from an improper
+ memory location when MMU translation is changed from SCTLR_ELn[M]=1
+ to SCTLR_ELn[M]=0. Prefix an ISB instruction to fix the problem.
+
+ If unsure, say Y.
+
endmenu