Merge tag 'for-v3.14-rc/omap-fixes-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.14/fixes
Several OMAP clock/PM/device data fixes for v3.14-rc. There's an OMAP5
reboot fix in there, plus a clock fix for rate computations involving
x2 multipliers.
Basic build, boot, and PM test logs are available here:
http://www.pwsan.com/omap/testlogs/prcm-fixes-a-v3.14-rc/20140219131753/
Note that most full-chip PM is broken since the v3.14 merge; it's
not caused by this series.
diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c
index 3b05aea..11ed915 100644
--- a/arch/arm/mach-omap2/cclock3xxx_data.c
+++ b/arch/arm/mach-omap2/cclock3xxx_data.c
@@ -433,7 +433,9 @@
.enable = &omap2_dflt_clk_enable,
.disable = &omap2_dflt_clk_disable,
.is_enabled = &omap2_dflt_clk_is_enabled,
+ .set_rate = &omap3_clkoutx2_set_rate,
.recalc_rate = &omap3_clkoutx2_recalc,
+ .round_rate = &omap3_clkoutx2_round_rate,
};
static const struct clk_ops dpll4_m5x2_ck_3630_ops = {
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 3185ced..3c418ea 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -623,25 +623,12 @@
/* Clock control for DPLL outputs */
-/**
- * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
- * @clk: DPLL output struct clk
- *
- * Using parent clock DPLL data, look up DPLL state. If locked, set our
- * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
- */
-unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
- unsigned long parent_rate)
+/* Find the parent DPLL for the given clkoutx2 clock */
+static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
{
- const struct dpll_data *dd;
- unsigned long rate;
- u32 v;
struct clk_hw_omap *pclk = NULL;
struct clk *parent;
- if (!parent_rate)
- return 0;
-
/* Walk up the parents of clk, looking for a DPLL */
do {
do {
@@ -656,9 +643,35 @@
/* clk does not have a DPLL as a parent? error in the clock data */
if (!pclk) {
WARN_ON(1);
- return 0;
+ return NULL;
}
+ return pclk;
+}
+
+/**
+ * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
+ * @clk: DPLL output struct clk
+ *
+ * Using parent clock DPLL data, look up DPLL state. If locked, set our
+ * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
+ */
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ const struct dpll_data *dd;
+ unsigned long rate;
+ u32 v;
+ struct clk_hw_omap *pclk = NULL;
+
+ if (!parent_rate)
+ return 0;
+
+ pclk = omap3_find_clkoutx2_dpll(hw);
+
+ if (!pclk)
+ return 0;
+
dd = pclk->dpll_data;
WARN_ON(!dd->enable_mask);
@@ -672,6 +685,55 @@
return rate;
}
+int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ return 0;
+}
+
+long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ const struct dpll_data *dd;
+ u32 v;
+ struct clk_hw_omap *pclk = NULL;
+
+ if (!*prate)
+ return 0;
+
+ pclk = omap3_find_clkoutx2_dpll(hw);
+
+ if (!pclk)
+ return 0;
+
+ dd = pclk->dpll_data;
+
+ /* TYPE J does not have a clkoutx2 */
+ if (dd->flags & DPLL_J_TYPE) {
+ *prate = __clk_round_rate(__clk_get_parent(pclk->hw.clk), rate);
+ return *prate;
+ }
+
+ WARN_ON(!dd->enable_mask);
+
+ v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+
+ /* If in bypass, the rate is fixed to the bypass rate*/
+ if (v != OMAP3XXX_EN_DPLL_LOCKED)
+ return *prate;
+
+ if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
+ unsigned long best_parent;
+
+ best_parent = (rate / 2);
+ *prate = __clk_round_rate(__clk_get_parent(hw->clk),
+ best_parent);
+ }
+
+ return *prate * 2;
+}
+
/* OMAP3/4 non-CORE DPLL clkops */
const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
.allow_idle = omap3_dpll_allow_idle,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 42d8188..1f33f5d 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1947,29 +1947,31 @@
goto dis_opt_clks;
_write_sysconfig(v, oh);
+
+ if (oh->class->sysc->srst_udelay)
+ udelay(oh->class->sysc->srst_udelay);
+
+ c = _wait_softreset_complete(oh);
+ if (c == MAX_MODULE_SOFTRESET_WAIT) {
+ pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
+ oh->name, MAX_MODULE_SOFTRESET_WAIT);
+ ret = -ETIMEDOUT;
+ goto dis_opt_clks;
+ } else {
+ pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c);
+ }
+
ret = _clear_softreset(oh, &v);
if (ret)
goto dis_opt_clks;
_write_sysconfig(v, oh);
- if (oh->class->sysc->srst_udelay)
- udelay(oh->class->sysc->srst_udelay);
-
- c = _wait_softreset_complete(oh);
- if (c == MAX_MODULE_SOFTRESET_WAIT)
- pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
- oh->name, MAX_MODULE_SOFTRESET_WAIT);
- else
- pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c);
-
/*
* XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
* _wait_target_ready() or _reset()
*/
- ret = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
-
dis_opt_clks:
if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
_disable_optional_clocks(oh);
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 18f333c..810c205 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -1365,11 +1365,10 @@
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
+ SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index 6334b96..280f3c5 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -183,11 +183,11 @@
OMAP4_PRM_RSTCTRL_OFFSET);
v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION,
- OMAP4430_PRM_DEVICE_INST,
+ dev_inst,
OMAP4_PRM_RSTCTRL_OFFSET);
/* OCP barrier */
v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
- OMAP4430_PRM_DEVICE_INST,
+ dev_inst,
OMAP4_PRM_RSTCTRL_OFFSET);
}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 092b641..4a21a87 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -245,6 +245,10 @@
void omap2_init_clk_clkdm(struct clk_hw *clk);
unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
unsigned long parent_rate);
+int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate);
+long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate);
int omap2_clkops_enable_clkdm(struct clk_hw *hw);
void omap2_clkops_disable_clkdm(struct clk_hw *hw);
int omap2_clk_disable_autoidle_all(void);