[SCSI] lpfc 8.3.24: Add SR-IOV control
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 16b4da4..e81912c 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -4034,6 +4034,36 @@
}
/**
+ * lpfc_sli_probe_sriov_nr_virtfn - Enable a number of sr-iov virtual functions
+ * @phba: pointer to lpfc hba data structure.
+ * @nr_vfn: number of virtual functions to be enabled.
+ *
+ * This function enables the PCI SR-IOV virtual functions to a physical
+ * function. It invokes the PCI SR-IOV api with the @nr_vfn provided to
+ * enable the number of virtual functions to the physical function. As
+ * not all devices support SR-IOV, the return code from the pci_enable_sriov()
+ * API call does not considered as an error condition for most of the device.
+ **/
+int
+lpfc_sli_probe_sriov_nr_virtfn(struct lpfc_hba *phba, int nr_vfn)
+{
+ struct pci_dev *pdev = phba->pcidev;
+ int rc;
+
+ rc = pci_enable_sriov(pdev, nr_vfn);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2806 Failed to enable sriov on this device "
+ "with vfn number nr_vf:%d, rc:%d\n",
+ nr_vfn, rc);
+ } else
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2807 Successful enable sriov on this device "
+ "with vfn number nr_vf:%d\n", nr_vfn);
+ return rc;
+}
+
+/**
* lpfc_sli_driver_resource_setup - Setup driver internal resources for SLI3 dev.
* @phba: pointer to lpfc hba data structure.
*
@@ -4048,6 +4078,7 @@
lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
{
struct lpfc_sli *psli;
+ int rc;
/*
* Initialize timers used by driver
@@ -4122,6 +4153,23 @@
if (lpfc_mem_alloc(phba, BPL_ALIGN_SZ))
return -ENOMEM;
+ /*
+ * Enable sr-iov virtual functions if supported and configured
+ * through the module parameter.
+ */
+ if (phba->cfg_sriov_nr_virtfn > 0) {
+ rc = lpfc_sli_probe_sriov_nr_virtfn(phba,
+ phba->cfg_sriov_nr_virtfn);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2808 Requested number of SR-IOV "
+ "virtual functions (%d) is not "
+ "supported\n",
+ phba->cfg_sriov_nr_virtfn);
+ phba->cfg_sriov_nr_virtfn = 0;
+ }
+ }
+
return 0;
}
@@ -4427,6 +4475,23 @@
goto out_free_fcp_eq_hdl;
}
+ /*
+ * Enable sr-iov virtual functions if supported and configured
+ * through the module parameter.
+ */
+ if (phba->cfg_sriov_nr_virtfn > 0) {
+ rc = lpfc_sli_probe_sriov_nr_virtfn(phba,
+ phba->cfg_sriov_nr_virtfn);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "3020 Requested number of SR-IOV "
+ "virtual functions (%d) is not "
+ "supported\n",
+ phba->cfg_sriov_nr_virtfn);
+ phba->cfg_sriov_nr_virtfn = 0;
+ }
+ }
+
return rc;
out_free_fcp_eq_hdl:
@@ -5780,7 +5845,12 @@
{
LPFC_MBOXQ_t *pmb;
struct lpfc_mbx_read_config *rd_config;
- uint32_t rc = 0;
+ union lpfc_sli4_cfg_shdr *shdr;
+ uint32_t shdr_status, shdr_add_status;
+ struct lpfc_mbx_get_func_cfg *get_func_cfg;
+ struct lpfc_rsrc_desc_fcfcoe *desc;
+ uint32_t desc_count;
+ int length, i, rc = 0;
pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmb) {
@@ -5855,7 +5925,9 @@
phba->sli4_hba.max_cfg_param.fcfi_base,
phba->sli4_hba.max_cfg_param.max_fcfi);
}
- mempool_free(pmb, phba->mbox_mem_pool);
+
+ if (rc)
+ goto read_cfg_out;
/* Reset the DFT_HBA_Q_DEPTH to the max xri */
if (phba->cfg_hba_queue_depth >
@@ -5864,6 +5936,65 @@
phba->cfg_hba_queue_depth =
phba->sli4_hba.max_cfg_param.max_xri -
lpfc_sli4_get_els_iocb_cnt(phba);
+
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ LPFC_SLI_INTF_IF_TYPE_2)
+ goto read_cfg_out;
+
+ /* get the pf# and vf# for SLI4 if_type 2 port */
+ length = (sizeof(struct lpfc_mbx_get_func_cfg) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, pmb, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG,
+ length, LPFC_SLI4_MBX_EMBED);
+
+ rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &pmb->u.mqe.un.sli4_config.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (rc || shdr_status || shdr_add_status) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "3026 Mailbox failed , mbxCmd x%x "
+ "GET_FUNCTION_CONFIG, mbxStatus x%x\n",
+ bf_get(lpfc_mqe_command, &pmb->u.mqe),
+ bf_get(lpfc_mqe_status, &pmb->u.mqe));
+ rc = -EIO;
+ goto read_cfg_out;
+ }
+
+ /* search for fc_fcoe resrouce descriptor */
+ get_func_cfg = &pmb->u.mqe.un.get_func_cfg;
+ desc_count = get_func_cfg->func_cfg.rsrc_desc_count;
+
+ for (i = 0; i < LPFC_RSRC_DESC_MAX_NUM; i++) {
+ desc = (struct lpfc_rsrc_desc_fcfcoe *)
+ &get_func_cfg->func_cfg.desc[i];
+ if (LPFC_RSRC_DESC_TYPE_FCFCOE ==
+ bf_get(lpfc_rsrc_desc_pcie_type, desc)) {
+ phba->sli4_hba.iov.pf_number =
+ bf_get(lpfc_rsrc_desc_fcfcoe_pfnum, desc);
+ phba->sli4_hba.iov.vf_number =
+ bf_get(lpfc_rsrc_desc_fcfcoe_vfnum, desc);
+ break;
+ }
+ }
+
+ if (i < LPFC_RSRC_DESC_MAX_NUM)
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "3027 GET_FUNCTION_CONFIG: pf_number:%d, "
+ "vf_number:%d\n", phba->sli4_hba.iov.pf_number,
+ phba->sli4_hba.iov.vf_number);
+ else {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "3028 GET_FUNCTION_CONFIG: failed to find "
+ "Resrouce Descriptor:x%x\n",
+ LPFC_RSRC_DESC_TYPE_FCFCOE);
+ rc = -EIO;
+ }
+
+read_cfg_out:
+ mempool_free(pmb, phba->mbox_mem_pool);
return rc;
}
@@ -7825,6 +7956,7 @@
{
int wait_cnt = 0;
LPFC_MBOXQ_t *mboxq;
+ struct pci_dev *pdev = phba->pcidev;
lpfc_stop_hba_timers(phba);
phba->sli4_hba.intr_enable = 0;
@@ -7864,6 +7996,10 @@
/* Disable PCI subsystem interrupt */
lpfc_sli4_disable_intr(phba);
+ /* Disable SR-IOV if enabled */
+ if (phba->cfg_sriov_nr_virtfn)
+ pci_disable_sriov(pdev);
+
/* Stop kthread signal shall trigger work_done one more time */
kthread_stop(phba->worker_thread);
@@ -8243,6 +8379,10 @@
lpfc_debugfs_terminate(vport);
+ /* Disable SR-IOV if enabled */
+ if (phba->cfg_sriov_nr_virtfn)
+ pci_disable_sriov(pdev);
+
/* Disable interrupt */
lpfc_sli_disable_intr(phba);