net: dsa: propagate extack to .port_vlan_filtering
Some drivers can't dynamically change the VLAN filtering option, or
impose some restrictions, it would be nice to propagate this info
through netlink instead of printing it to a kernel log that might never
be read. Also netlink extack includes the module that emitted the
message, which means that it's easier to figure out which ones are
driver-generated errors as opposed to command misuse.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 98cc051..ae86ded 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1409,7 +1409,8 @@ void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
}
EXPORT_SYMBOL(b53_phylink_mac_link_up);
-int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
+int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
+ struct netlink_ext_ack *extack)
{
struct b53_device *dev = ds->priv;
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index fc5d6fd..faf983f 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -346,7 +346,8 @@ void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
struct phy_device *phydev,
int speed, int duplex,
bool tx_pause, bool rx_pause);
-int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering);
+int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
+ struct netlink_ext_ack *extack);
int b53_vlan_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct netlink_ext_ack *extack);
diff --git a/drivers/net/dsa/dsa_loop.c b/drivers/net/dsa/dsa_loop.c
index e55b63a..bfdf332 100644
--- a/drivers/net/dsa/dsa_loop.c
+++ b/drivers/net/dsa/dsa_loop.c
@@ -190,7 +190,8 @@ static void dsa_loop_port_stp_state_set(struct dsa_switch *ds, int port,
}
static int dsa_loop_port_vlan_filtering(struct dsa_switch *ds, int port,
- bool vlan_filtering)
+ bool vlan_filtering,
+ struct netlink_ext_ack *extack)
{
dev_dbg(ds->dev, "%s: port: %d, vlan_filtering: %d\n",
__func__, port, vlan_filtering);
diff --git a/drivers/net/dsa/hirschmann/hellcreek.c b/drivers/net/dsa/hirschmann/hellcreek.c
index 5816ef9..463137c 100644
--- a/drivers/net/dsa/hirschmann/hellcreek.c
+++ b/drivers/net/dsa/hirschmann/hellcreek.c
@@ -875,7 +875,8 @@ static int hellcreek_fdb_dump(struct dsa_switch *ds, int port,
}
static int hellcreek_vlan_filtering(struct dsa_switch *ds, int port,
- bool vlan_filtering)
+ bool vlan_filtering,
+ struct netlink_ext_ack *extack)
{
struct hellcreek *hellcreek = ds->priv;
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 174ca3a..52e865a 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -727,14 +727,18 @@ static int gswip_pce_load_microcode(struct gswip_priv *priv)
}
static int gswip_port_vlan_filtering(struct dsa_switch *ds, int port,
- bool vlan_filtering)
+ bool vlan_filtering,
+ struct netlink_ext_ack *extack)
{
struct net_device *bridge = dsa_to_port(ds, port)->bridge_dev;
struct gswip_priv *priv = ds->priv;
/* Do not allow changing the VLAN filtering options while in bridge */
- if (bridge && !!(priv->port_vlan_filter & BIT(port)) != vlan_filtering)
+ if (bridge && !!(priv->port_vlan_filter & BIT(port)) != vlan_filtering) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Dynamic toggling of vlan_filtering not supported");
return -EIO;
+ }
if (vlan_filtering) {
/* Use port based VLAN tag */
@@ -773,7 +777,7 @@ static int gswip_setup(struct dsa_switch *ds)
/* disable port fetch/store dma on all ports */
for (i = 0; i < priv->hw_info->max_ports; i++) {
gswip_port_disable(ds, i);
- gswip_port_vlan_filtering(ds, i, false);
+ gswip_port_vlan_filtering(ds, i, false, NULL);
}
/* enable Switch */
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 1e27a3e..b4b7de6 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -783,7 +783,8 @@ static void ksz8795_flush_dyn_mac_table(struct ksz_device *dev, int port)
}
static int ksz8795_port_vlan_filtering(struct dsa_switch *ds, int port,
- bool flag)
+ bool flag,
+ struct netlink_ext_ack *extack)
{
struct ksz_device *dev = ds->priv;
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 772e34d..55e5d47 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -493,7 +493,8 @@ static void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port)
}
static int ksz9477_port_vlan_filtering(struct dsa_switch *ds, int port,
- bool flag)
+ bool flag,
+ struct netlink_ext_ack *extack)
{
struct ksz_device *dev = ds->priv;
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index c089cd4..c17de2b 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1376,8 +1376,8 @@ mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid)
}
static int
-mt7530_port_vlan_filtering(struct dsa_switch *ds, int port,
- bool vlan_filtering)
+mt7530_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
+ struct netlink_ext_ack *extack)
{
if (vlan_filtering) {
/* The port is being kept as VLAN-unaware port when bridge is
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index d46f0c0..903d619 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -1600,7 +1600,8 @@ static int mv88e6xxx_port_check_hw_vlan(struct dsa_switch *ds, int port,
}
static int mv88e6xxx_port_vlan_filtering(struct dsa_switch *ds, int port,
- bool vlan_filtering)
+ bool vlan_filtering,
+ struct netlink_ext_ack *extack)
{
struct mv88e6xxx_chip *chip = ds->priv;
u16 mode = vlan_filtering ? MV88E6XXX_PORT_CTL2_8021Q_MODE_SECURE :
diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index 3951189..800f27d 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -781,7 +781,8 @@ static int felix_vlan_prepare(struct dsa_switch *ds, int port,
flags & BRIDGE_VLAN_INFO_UNTAGGED);
}
-static int felix_vlan_filtering(struct dsa_switch *ds, int port, bool enabled)
+static int felix_vlan_filtering(struct dsa_switch *ds, int port, bool enabled,
+ struct netlink_ext_ack *extack)
{
struct ocelot *ocelot = ds->priv;
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 73978e7..cdaf9f8 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1294,7 +1294,8 @@ qca8k_port_fdb_dump(struct dsa_switch *ds, int port,
}
static int
-qca8k_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
+qca8k_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
+ struct netlink_ext_ack *extack)
{
struct qca8k_priv *priv = ds->priv;
diff --git a/drivers/net/dsa/realtek-smi-core.h b/drivers/net/dsa/realtek-smi-core.h
index 93a3e05..fcf465f 100644
--- a/drivers/net/dsa/realtek-smi-core.h
+++ b/drivers/net/dsa/realtek-smi-core.h
@@ -130,8 +130,8 @@ int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable);
int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable);
int rtl8366_reset_vlan(struct realtek_smi *smi);
int rtl8366_init_vlan(struct realtek_smi *smi);
-int rtl8366_vlan_filtering(struct dsa_switch *ds, int port,
- bool vlan_filtering);
+int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
+ struct netlink_ext_ack *extack);
int rtl8366_vlan_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct netlink_ext_ack *extack);
diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c
index 76303a7..75897a3 100644
--- a/drivers/net/dsa/rtl8366.c
+++ b/drivers/net/dsa/rtl8366.c
@@ -340,7 +340,8 @@ int rtl8366_init_vlan(struct realtek_smi *smi)
}
EXPORT_SYMBOL_GPL(rtl8366_init_vlan);
-int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
+int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
+ struct netlink_ext_ack *extack)
{
struct realtek_smi *smi = ds->priv;
struct rtl8366_vlan_4k vlan4k;
diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h
index 15a0893..90f0f6f 100644
--- a/drivers/net/dsa/sja1105/sja1105.h
+++ b/drivers/net/dsa/sja1105/sja1105.h
@@ -247,7 +247,8 @@ enum sja1105_reset_reason {
int sja1105_static_config_reload(struct sja1105_private *priv,
enum sja1105_reset_reason reason);
-int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled);
+int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled,
+ struct netlink_ext_ack *extack);
void sja1105_frame_memory_partitioning(struct sja1105_private *priv);
/* From sja1105_devlink.c */
diff --git a/drivers/net/dsa/sja1105/sja1105_devlink.c b/drivers/net/dsa/sja1105/sja1105_devlink.c
index b4bf1b1..b6a4a16 100644
--- a/drivers/net/dsa/sja1105/sja1105_devlink.c
+++ b/drivers/net/dsa/sja1105/sja1105_devlink.c
@@ -143,7 +143,7 @@ static int sja1105_best_effort_vlan_filtering_set(struct sja1105_private *priv,
dp = dsa_to_port(ds, port);
vlan_filtering = dsa_port_is_vlan_filtering(dp);
- rc = sja1105_vlan_filtering(ds, port, vlan_filtering);
+ rc = sja1105_vlan_filtering(ds, port, vlan_filtering, NULL);
if (rc)
break;
}
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 92c7cea..0818a67 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -2639,7 +2639,8 @@ static int sja1105_build_vlan_table(struct sja1105_private *priv, bool notify)
* which can only be partially reconfigured at runtime (and not the TPID).
* So a switch reset is required.
*/
-int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled)
+int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled,
+ struct netlink_ext_ack *extack)
{
struct sja1105_l2_lookup_params_entry *l2_lookup_params;
struct sja1105_general_params_entry *general_params;
@@ -2653,8 +2654,8 @@ int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled)
list_for_each_entry(rule, &priv->flow_block.rules, list) {
if (rule->type == SJA1105_RULE_VL) {
- dev_err(ds->dev,
- "Cannot change VLAN filtering with active VL rules\n");
+ NL_SET_ERR_MSG_MOD(extack,
+ "Cannot change VLAN filtering with active VL rules");
return -EBUSY;
}
}
@@ -2736,7 +2737,7 @@ int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled)
rc = sja1105_static_config_reload(priv, SJA1105_VLAN_FILTERING);
if (rc)
- dev_err(ds->dev, "Failed to change VLAN Ethertype\n");
+ NL_SET_ERR_MSG_MOD(extack, "Failed to change VLAN Ethertype");
/* Switch port identification based on 802.1Q is only passable
* if we are not under a vlan_filtering bridge. So make sure